diff options
Diffstat (limited to 'target/device/Atmel/arch-arm')
13 files changed, 4180 insertions, 0 deletions
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch new file mode 100644 index 000000000..0445b2329 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch @@ -0,0 +1,723 @@ +diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h +--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h 2009-01-01 14:02:28.000000000 +0100 +@@ -0,0 +1,49 @@ ++/* ++ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h] ++ * ++ * Copyright (C) 2005 Ivan Kokshaysky ++ * Copyright (C) SAN People ++ * ++ * Parallel I/O Controller (PIO) - System peripherals registers. ++ * Based on AT91RM9200 datasheet revision E. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91_PIO_H ++#define AT91_PIO_H ++ ++#define PIO_PER 0x00 /* Enable Register */ ++#define PIO_PDR 0x04 /* Disable Register */ ++#define PIO_PSR 0x08 /* Status Register */ ++#define PIO_OER 0x10 /* Output Enable Register */ ++#define PIO_ODR 0x14 /* Output Disable Register */ ++#define PIO_OSR 0x18 /* Output Status Register */ ++#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ ++#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ ++#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ ++#define PIO_SODR 0x30 /* Set Output Data Register */ ++#define PIO_CODR 0x34 /* Clear Output Data Register */ ++#define PIO_ODSR 0x38 /* Output Data Status Register */ ++#define PIO_PDSR 0x3c /* Pin Data Status Register */ ++#define PIO_IER 0x40 /* Interrupt Enable Register */ ++#define PIO_IDR 0x44 /* Interrupt Disable Register */ ++#define PIO_IMR 0x48 /* Interrupt Mask Register */ ++#define PIO_ISR 0x4c /* Interrupt Status Register */ ++#define PIO_MDER 0x50 /* Multi-driver Enable Register */ ++#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ ++#define PIO_MDSR 0x58 /* Multi-driver Status Register */ ++#define PIO_PUDR 0x60 /* Pull-up Disable Register */ ++#define PIO_PUER 0x64 /* Pull-up Enable Register */ ++#define PIO_PUSR 0x68 /* Pull-up Status Register */ ++#define PIO_ASR 0x70 /* Peripheral A Select Register */ ++#define PIO_BSR 0x74 /* Peripheral B Select Register */ ++#define PIO_ABSR 0x78 /* AB Status Register */ ++#define PIO_OWER 0xa0 /* Output Write Enable Register */ ++#define PIO_OWDR 0xa4 /* Output Write Disable Register */ ++#define PIO_OWSR 0xa8 /* Output Write Status Register */ ++ ++#endif +diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h +--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h 2009-01-01 15:51:28.000000000 +0100 +@@ -0,0 +1,116 @@ ++/* ++ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pmc.h] ++ * ++ * Copyright (C) 2005 Ivan Kokshaysky ++ * Copyright (C) SAN People ++ * ++ * Copyright (C) 2008 Ulf Samuelsson ++ * ++ * Power Management Controller (PMC) - System peripherals registers. ++ * Based on AT91RM9200 datasheet revision E. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91_PMC_H ++#define AT91_PMC_H ++ ++#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ ++#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ ++ ++#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ ++#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ ++#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ ++#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ ++#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ ++#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ ++#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ ++#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ ++#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ ++#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ ++#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ ++#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ ++#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ ++#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ ++#define AT91_PMC_RES_0C (AT91_PMC + 0x0c) /* Reserved */ ++ ++#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ ++#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ ++#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ ++#define AT91_PMC_RES_1C (AT91_PMC + 0x1c) /* Reserved */ ++ ++ ++#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ ++#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ ++#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ ++#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ ++ ++#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ ++#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ ++#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ ++ ++#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ ++#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ ++#define AT91_PMC_DIV (0xff << 0) /* Divider */ ++#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ ++#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ ++#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ ++#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ ++#define AT91_PMC_USBDIV_1 (0 << 28) ++#define AT91_PMC_USBDIV_2 (1 << 28) ++#define AT91_PMC_USBDIV_4 (2 << 28) ++#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ ++ ++#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ ++#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ ++#define AT91_PMC_CSS_SLOW (0 << 0) ++#define AT91_PMC_CSS_MAIN (1 << 0) ++#define AT91_PMC_CSS_PLLA (2 << 0) ++#define AT91_PMC_CSS_PLLB (3 << 0) ++#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ ++#define AT91_PMC_PRES_1 (0 << 2) ++#define AT91_PMC_PRES_2 (1 << 2) ++#define AT91_PMC_PRES_4 (2 << 2) ++#define AT91_PMC_PRES_8 (3 << 2) ++#define AT91_PMC_PRES_16 (4 << 2) ++#define AT91_PMC_PRES_32 (5 << 2) ++#define AT91_PMC_PRES_64 (6 << 2) ++#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ ++#define AT91_PMC_MDIV_1 (0 << 8) ++#define AT91_PMC_MDIV_2 (1 << 8) ++#define AT91_PMC_MDIV_3 (2 << 8) ++#define AT91_PMC_MDIV_4 (3 << 8) ++ ++#define AT91_PMC_RES_34 (AT91_PMC + 0x34) /* Reserved */ ++#define AT91_PMC_RES_38 (AT91_PMC + 0x38) /* Reserved */ ++#define AT91_PMC_RES_3C (AT91_PMC + 0x3c) /* Reserved */ ++ ++#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ ++ ++#define AT91_PMC_RES_50 (AT91_PMC + 0x50) /* Reserved */ ++#define AT91_PMC_RES_54 (AT91_PMC + 0x54) /* Reserved */ ++#define AT91_PMC_RES_58 (AT91_PMC + 0x58) /* Reserved */ ++#define AT91_PMC_RES_5C (AT91_PMC + 0x5c) /* Reserved */ ++ ++#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ ++#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ ++#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ ++#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ ++#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ ++#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ ++#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ ++#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ ++#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ ++#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ ++#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ ++#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ ++ ++#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ ++#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ ++ ++#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ ++ ++#endif +diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h +--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h 2009-01-01 13:09:34.000000000 +0100 ++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h 2009-01-01 15:52:00.000000000 +0100 +@@ -28,6 +28,114 @@ + #ifndef __ASSEMBLY__ + typedef volatile unsigned int AT91_REG; /* Hardware register definition */ + ++/* ++ * Peripheral identifiers/interrupts. ++ */ ++#define AT91RM9200_ID_AIC 0 /* Advanced Interrupt Controller (FIQ) */ ++#define AT91RM9200_ID_SYSIRQ 1 /* System Peripherals */ ++#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ ++#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ ++#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ ++#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ ++#define AT91RM9200_ID_US0 6 /* USART 0 */ ++#define AT91RM9200_ID_US1 7 /* USART 1 */ ++#define AT91RM9200_ID_US2 8 /* USART 2 */ ++#define AT91RM9200_ID_US3 9 /* USART 2 */ ++#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ ++#define AT91RM9200_ID_UDP 11 /* USB Device Port */ ++#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ ++#define AT91RM9200_ID_SPI0 13 /* Serial Peripheral Interface 0 */ ++#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller */ ++#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller */ ++#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller */ ++#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ ++#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ ++#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ ++#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ ++#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ ++#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ ++#define AT91RM9200_ID_UHP 23 /* USB Host port */ ++#define AT91RM9200_ID_EMAC 24 /* Ethernet */ ++#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ ++#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ ++#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ ++#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ ++#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ ++#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ ++#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ ++/* ++ * User Peripheral physical base addresses. ++ */ ++ ++ ++ ++#define AT91RM9200_BASE_TC0 0xFFFA0000 /* (TC0) Base Address */ ++#define AT91RM9200_BASE_TC1 0xFFFA4000 /* (TC0) Base Address */ ++#define AT91RM9200_BASE_UDP 0xFFFB0000 /* (TC0) Base Address */ ++#define AT91RM9200_BASE_MCI 0xFFFB4000 /* (TC0) Base Address */ ++#define AT91RM9200_BASE_TWI 0xFFFB8000 /* (TC0) Base Address */ ++#define AT91RM9200_BASE_EMAC 0xFFFBC000 /* (EMAC) Base Address */ ++#define AT91RM9200_BASE_US0 0xFFFC0000 /* (US0) Base Address */ ++#define AT91RM9200_BASE_US1 0xFFFC4000 /* (US1) Base Address */ ++#define AT91RM9200_BASE_US2 0xFFFC8000 /* (US1) Base Address */ ++#define AT91RM9200_BASE_US3 0xFFFCC000 /* (US1) Base Address */ ++#define AT91RM9200_BASE_SPI 0xFFFE0000 /* (SPI) Base Address */ ++ ++#define AT91RM9200_BASE_AIC 0xFFFFF000 /* (AIC) Base Address */ ++#define AT91RM9200_BASE_DBGU 0xFFFFF200 /* (DBGU) Base Address */ ++#define AT91RM9200_BASE_PIOA 0xFFFFF400 /* (PIOA) Base Address */ ++#define AT91RM9200_BASE_PIOB 0xFFFFF600 /* (PIOB) Base Address */ ++#define AT91RM9200_BASE_PIOC 0xFFFFF800 /* (PIOC) Base Address */ ++#define AT91RM9200_BASE_PIOD 0xFFFFFA00 /* (PIOC) Base Address */ ++#define AT91RM9200_BASE_PMC 0xFFFFFC00 /* (PMC) Base Address */ ++#define AT91RM9200_BASE_CKGR 0xFFFFFC20 /* (CKGR) Base Address */ ++#define AT91RM9200_BASE_ST 0xFFFFFD00 /* (PMC) Base Address */ ++#define AT91RM9200_BASE_RTC 0xFFFFFE00 /* (PMC) Base Address */ ++#define AT91RM9200_BASE_MC 0xFFFFFF00 /* (PMC) Base Address */ ++#define AT91RM9200_BASE_EBI 0xFFFFFF60 /* (PMC) Base Address */ ++#define AT91RM9200_BASE_SMC2 0xFFFFFF70 /* (SMC2) Base Address */ ++#define AT91RM9200_BASE_SDRAMC 0xFFFFFF90 /* (SMC2) Base Address */ ++#define AT91RM9200_BASE_BFC 0xFFFFFFC0 /* (SMC2) Base Address */ ++ ++/* ++ * System Peripherals (offset from AT91_BASE_SYS) ++ */ ++#define AT91_BASE_SYS AT91RM9200_BASE_AIC ++ ++#define AT91_AIC (AT91RM9200_BASE_AIC - AT91_BASE_SYS) ++#define AT91_DBGU (AT91RM9200_BASE_DBGU - AT91_BASE_SYS) ++#define AT91_PIOA (AT91RM9200_BASE_PIOA - AT91_BASE_SYS) ++#define AT91_PIOB (AT91RM9200_BASE_PIOB - AT91_BASE_SYS) ++#define AT91_PIOC (AT91RM9200_BASE_PIOC - AT91_BASE_SYS) ++#define AT91_PIOD (AT91RM9200_BASE_PIOD - AT91_BASE_SYS) ++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS) ++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS) ++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS) ++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS) ++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS) ++ ++#define AT91_CKGR (AT91RM9200_BASE_CKGR - AT91_BASE_SYS) ++#define AT91_ST (AT91RM9200_BASE_ST - AT91_BASE_SYS) ++#define AT91_RTC (AT91RM9200_BASE_RTC - AT91_BASE_SYS) ++#define AT91_MC (AT91RM9200_BASE_MC - AT91_BASE_SYS) ++#define AT91_EBI (AT91RM9200_BASE_EBI - AT91_BASE_SYS) ++#define AT91_EBI_CSA ((AT91RM9200_BASE_EBI +0x00) - AT91_BASE_SYS) ++#define AT91_SMC2 (AT91RM9200_BASE_SMC2 - AT91_BASE_SYS) ++#define AT91_SMC2_CSR0 ((AT91RM9200_BASE_SMC2+0x00) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR1 ((AT91RM9200_BASE_SMC2+0x04) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR2 ((AT91RM9200_BASE_SMC2+0x08) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR3 ((AT91RM9200_BASE_SMC2+0x0c) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR4 ((AT91RM9200_BASE_SMC2+0x10) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR5 ((AT91RM9200_BASE_SMC2+0x14) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR6 ((AT91RM9200_BASE_SMC2+0x18) - AT91_BASE_SYS) ++#define AT91_SMC2_CSR7 ((AT91RM9200_BASE_SMC2+0x1c) - AT91_BASE_SYS) ++ ++ ++#define AT91_USART0 AT91RM9200_BASE_US0 ++#define AT91_USART1 AT91RM9200_BASE_US1 ++#define AT91_USART2 AT91RM9200_BASE_US2 ++#define AT91_USART3 AT91RM9200_BASE_US3 ++ + /*****************************************************************************/ + /* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */ + /*****************************************************************************/ +diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h +--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h 2009-01-01 14:02:11.000000000 +0100 +@@ -0,0 +1,367 @@ ++/* ++ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h] ++ * ++ * Copyright (C) 2005 HP Labs ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++ ++#ifndef __ASM_ARCH_AT91_GPIO_H ++#define __ASM_ARCH_AT91_GPIO_H ++ ++#include <asm/io.h> ++#include <asm/errno.h> ++#include <asm/arch/at91_pio.h> ++#include <asm/arch/hardware.h> ++ ++#define PIN_BASE 32 ++ ++#define MAX_GPIO_BANKS 5 ++ ++/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ ++ ++#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) ++#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) ++#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) ++#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) ++#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) ++#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) ++#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) ++#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) ++#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) ++#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) ++#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) ++#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) ++#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) ++#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) ++#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) ++#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) ++#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) ++#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) ++#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) ++#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) ++#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) ++#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) ++#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) ++#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) ++#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) ++#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) ++#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) ++#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) ++#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) ++#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) ++#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) ++#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) ++ ++#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) ++#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) ++#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) ++#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) ++#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) ++#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) ++#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) ++#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) ++#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) ++#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) ++#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) ++#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) ++#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) ++#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) ++#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) ++#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) ++#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) ++#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) ++#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) ++#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) ++#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) ++#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) ++#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) ++#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) ++#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) ++#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) ++#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) ++#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) ++#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) ++#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) ++#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) ++#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) ++ ++#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) ++#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) ++#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) ++#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) ++#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) ++#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) ++#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) ++#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) ++#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) ++#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) ++#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) ++#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) ++#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) ++#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) ++#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) ++#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) ++#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) ++#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) ++#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) ++#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) ++#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) ++#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) ++#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) ++#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) ++#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) ++#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) ++#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) ++#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) ++#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) ++#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) ++#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) ++#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) ++ ++#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) ++#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) ++#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) ++#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) ++#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) ++#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) ++#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) ++#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) ++#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) ++#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) ++#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) ++#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) ++#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) ++#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) ++#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) ++#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) ++#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) ++#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) ++#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) ++#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) ++#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) ++#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) ++#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) ++#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) ++#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) ++#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) ++#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) ++#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) ++#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) ++#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) ++#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) ++#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) ++ ++#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) ++#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) ++#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) ++#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) ++#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) ++#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) ++#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) ++#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) ++#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) ++#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) ++#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) ++#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) ++#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) ++#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) ++#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) ++#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) ++#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) ++#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) ++#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) ++#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) ++#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) ++#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) ++#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) ++#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) ++#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) ++#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) ++#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) ++#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) ++#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) ++#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) ++#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) ++#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) ++ ++static unsigned long at91_pios[] = { ++ AT91_PIOA, ++ AT91_PIOB, ++ AT91_PIOC, ++#ifdef AT91_PIOD ++ AT91_PIOD, ++#ifdef AT91_PIOE ++ AT91_PIOE ++#endif ++#endif ++}; ++ ++static inline void *pin_to_controller(unsigned pin) ++{ ++ pin -= PIN_BASE; ++ pin /= 32; ++ return (void *)(AT91_BASE_SYS + at91_pios[pin]); ++} ++ ++static inline unsigned pin_to_mask(unsigned pin) ++{ ++ pin -= PIN_BASE; ++ return 1 << (pin % 32); ++} ++ ++/* ++ * mux the pin to the "GPIO" peripheral role. ++ */ ++static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + PIO_IDR); ++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); ++ __raw_writel(mask, pio + PIO_PER); ++ return 0; ++} ++ ++/* ++ * mux the pin to the "A" internal peripheral role. ++ */ ++static inline int at91_set_A_periph(unsigned pin, int use_pullup) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + PIO_IDR); ++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); ++ __raw_writel(mask, pio + PIO_ASR); ++ __raw_writel(mask, pio + PIO_PDR); ++ return 0; ++} ++ ++/* ++ * mux the pin to the "B" internal peripheral role. ++ */ ++static inline int at91_set_B_periph(unsigned pin, int use_pullup) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + PIO_IDR); ++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); ++ __raw_writel(mask, pio + PIO_BSR); ++ __raw_writel(mask, pio + PIO_PDR); ++ return 0; ++} ++ ++/* ++ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and ++ * configure it for an input. ++ */ ++static inline int at91_set_gpio_input(unsigned pin, int use_pullup) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + PIO_IDR); ++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); ++ __raw_writel(mask, pio + PIO_ODR); ++ __raw_writel(mask, pio + PIO_PER); ++ return 0; ++} ++ ++/* ++ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), ++ * and configure it for an output. ++ */ ++static inline int at91_set_gpio_output(unsigned pin, int value) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + PIO_IDR); ++ __raw_writel(mask, pio + PIO_PUDR); ++ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); ++ __raw_writel(mask, pio + PIO_OER); ++ __raw_writel(mask, pio + PIO_PER); ++ return 0; ++} ++ ++/* ++ * enable/disable the glitch filter; mostly used with IRQ handling. ++ */ ++static inline int at91_set_deglitch(unsigned pin, int is_on) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); ++ return 0; ++} ++ ++/* ++ * enable/disable the multi-driver; This is only valid for output and ++ * allows the output pin to run as an open collector output. ++ */ ++static inline int at91_set_multi_drive(unsigned pin, int is_on) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); ++ return 0; ++} ++ ++static inline int gpio_direction_input(unsigned pin) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ if (!(__raw_readl(pio + PIO_PSR) & mask)) ++ return -EINVAL; ++ __raw_writel(mask, pio + PIO_ODR); ++ return 0; ++} ++ ++static inline int gpio_direction_output(unsigned pin, int value) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ if (!(__raw_readl(pio + PIO_PSR) & mask)) ++ return -EINVAL; ++ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); ++ __raw_writel(mask, pio + PIO_OER); ++ return 0; ++} ++ ++/* ++ * assuming the pin is muxed as a gpio output, set its value. ++ */ ++static inline int at91_set_gpio_value(unsigned pin, int value) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ ++ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); ++ return 0; ++} ++ ++/* ++ * read the pin's value (works even if it's not muxed as a gpio). ++ */ ++static inline int at91_get_gpio_value(unsigned pin) ++{ ++ void *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ u32 pdsr; ++ ++ pdsr = __raw_readl(pio + PIO_PDSR); ++ return (pdsr & mask) != 0; ++} ++ ++#endif +diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h +--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h 2009-01-01 15:59:51.000000000 +0100 +@@ -0,0 +1,56 @@ ++/* ++ * [origin: Linux kernel include/asm-arm/arch-at91/io.h] ++ * ++ * Copyright (C) 2003 SAN People ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __ASM_ARCH_IO_H ++#define __ASM_ARCH_IO_H ++ ++#include <asm/io.h> ++ ++static inline unsigned int at91_sys_read(unsigned int reg_offset) ++{ ++ void *addr = (void *)AT91_BASE_SYS; ++ ++ return __raw_readl(addr + reg_offset); ++} ++ ++static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) ++{ ++ void *addr = (void *)AT91_BASE_SYS; ++ ++ __raw_writel(value, addr + reg_offset); ++} ++ ++static inline void at91_sys_setbit(unsigned long value, unsigned int reg_offset) ++{ ++ void *addr = (void *)(AT91_BASE_SYS + reg_offset); ++ value |= __raw_readl(addr); ++ __raw_writel(value, addr); ++} ++ ++static inline void at91_sys_clrbit(unsigned long value, unsigned int reg_offset) ++{ ++ void *addr = (void *)(AT91_BASE_SYS + reg_offset); ++ unsigned long data; ++ data = __raw_readl(addr); ++ data &= ~value; ++ __raw_writel(data, addr); ++} ++ ++#endif + diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch new file mode 100644 index 000000000..2e7e57822 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch @@ -0,0 +1,309 @@ +diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h +--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-01 21:19:30.000000000 +0100 +@@ -0,0 +1,251 @@ ++/* ++ * Rick Bronson <rick@efn.org> ++ * ++ * Configuration settings for the AT91RM9200DK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK ++#define CONFIG_HOSTNAME at91rm9200dk ++ ++/* ARM asynchronous clock */ ++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ ++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ ++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ ++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ ++#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++#define USE_920T_MMU 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* Already done by dataflashboot */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 ++/* flash */ ++#define MC_PUIA_VAL 0x00000000 ++#define MC_PUP_VAL 0x00000000 ++#define MC_PUER_VAL 0x00000000 ++#define MC_ASR_VAL 0x00000000 ++#define MC_AASR_VAL 0x00000000 ++#define EBI_CFGR_VAL 0x00000000 ++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ ++ ++/* clocks */ ++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ ++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ ++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ ++ ++/* sdram */ ++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ ++#define PIOC_BSR_VAL 0x00000000 ++#define PIOC_PDR_VAL 0xFFFF0000 ++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ ++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ ++#define SDRAM 0x20000000 /* address of the SDRAM */ ++#define SDRAM1 0x20000080 /* address of the SDRAM */ ++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ ++#define SDRC_MR_VAL 0x00000002 /* Precharge All */ ++#define SDRC_MR_VAL1 0x00000004 /* refresh */ ++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ ++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ ++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ ++#else ++#define CONFIG_SKIP_RELOCATE_UBOOT ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++/* ++ * Size of malloc() pool ++ */ ++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* define one of these to choose the DBGU, USART0 or USART1 as console */ ++#define CONFIG_DBGU ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++ ++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ ++ ++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ ++ ++#define CONFIG_BOOTDELAY 3 ++/* #define CONFIG_ENV_OVERWRITE 1 */ ++ ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_AT91_SPIMUX ++ ++#define CONFIG_NAND_LEGACY ++ ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define SECTORSIZE 512 ++ ++#define ADDR_COLUMN 1 ++#define ADDR_PAGE 2 ++#define ADDR_COLUMN_PAGE 3 ++ ++#define NAND_ChipID_UNKNOWN 0x00 ++#define NAND_MAX_FLOORS 1 ++#define NAND_MAX_CHIPS 1 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ ++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ ++ ++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ ++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) ++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) ++ ++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) ++ ++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) ++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) ++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) ++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) ++/* the following are NOP's in our implementation */ ++#define NAND_CTL_CLRALE(nandptr) ++#define NAND_CTL_SETALE(nandptr) ++#define NAND_CTL_CLRCLE(nandptr) ++#define NAND_CTL_SETCLE(nandptr) ++ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ ++ ++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM ++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 ++ ++#define CONFIG_DRIVER_ETHER ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_AT91C_USE_RMII ++ ++/* AC Characteristics */ ++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0xC << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) ++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 ++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ ++#define CONFIG__SUPPORT_BLOCK_ERASE 1 ++ ++ ++#define PHYS_FLASH_1 0x10000000 ++#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ ++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_MAX_FLASH_BANKS 1 ++#define CONFIG_SYS_MAX_FLASH_SECT 256 ++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ ++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ ++ ++#define CONFIG_ENV_IS_IN_DATAFLASH 1 ++#define CONFIG_NEW_PARTITION 1 ++ ++#ifdef CONFIG_ENV_IS_IN_DATAFLASH ++#ifdef CONFIG_NEW_PARTITION ++#define CONFIG_ENV_OFFSET 0x4200 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/ ++#else ++#define CONFIG_ENV_OFFSET 0x20000 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#endif ++#else ++#define CONFIG_ENV_IS_IN_FLASH 1 ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#else ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ ++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ ++ ++#if defined(CONFIG_AT91RM9200DK) ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 ++#else ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 ++#endif ++ ++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ ++ ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) ++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ ++#else ++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++ ++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } ++ ++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ ++ ++#define CONFIG_SYS_HZ 1000 ++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ ++ /* AT91C_TC_TIMER_DIV1_CLOCK */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h +--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h 2009-01-01 13:09:35.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-01 17:06:32.000000000 +0100 +@@ -24,6 +24,8 @@ + + #ifndef __CONFIG_H + #define __CONFIG_H ++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK ++#define CONFIG_HOSTNAME at91rm9200dk + + /* ARM asynchronous clock */ + #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ +@@ -33,6 +35,7 @@ + #define AT91_SLOW_CLOCK 32768 /* slow clock */ + + #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ + #define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ + #define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ + #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +@@ -117,6 +120,7 @@ + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII + #define CONFIG_CMD_NAND ++#define CONFIG_CMD_AT91_SPIMUX + + #define CONFIG_NAND_LEGACY + +@@ -198,6 +202,11 @@ + #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + #endif /* CONFIG_ENV_IS_IN_DATAFLASH */ + ++#if defined(CONFIG_AT91RM9200DK) ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 ++#else ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 ++#endif + + #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ + +diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01/Makefile +--- u-boot-2009.01-rc1-0rig//Makefile 2009-01-01 13:09:30.000000000 +0100 ++++ u-boot-2009.01/Makefile 2009-01-01 21:35:24.000000000 +0100 +@@ -2562,6 +2562,9 @@ + ## Atmel AT91RM9200 Systems + ######################################################################### + ++at91rm9200dk_df_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 ++ + at91rm9200dk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + + diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch new file mode 100644 index 000000000..8f14170fa --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch @@ -0,0 +1,324 @@ +diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c +--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 13:09:31.000000000 +0100 ++++ u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 16:11:36.000000000 +0100 +@@ -3,6 +3,9 @@ + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf.samuelsson@atmel.com> ++ * + * See file CREDITS for list of people who contributed to this + * project. + * +@@ -24,6 +27,10 @@ + + #include <common.h> + #include <asm/arch/AT91RM9200.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_pio.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> + #include <at91rm9200_net.h> + #include <dm9161.h> + +@@ -41,13 +48,13 @@ + + /* Correct IRDA resistor problem */ + /* Set PA23_TXD in Output */ +- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2; ++ at91_set_gpio_output(AT91_PIN_PA23, 1); + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of AT91RM9200DK-Board */ +- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK; ++ gd->bd->bi_arch_number = AT91RM9200_BOARD; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +@@ -91,46 +98,58 @@ + */ + #if defined(CONFIG_CMD_NAND) + extern ulong nand_probe (ulong physadr); ++/* set the bus interface characteristics based on ++ * tDS Data Set up Time 30 - ns ++ * tDH Data Hold Time 20 - ns ++ * tALS ALE Set up Time 20 - ns ++ * 16ns at 60 MHz ~= 3 ++ */ + +-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ +-void nand_init (void) +-{ +- /* Setup Smart Media, fitst enable the address range of CS3 */ +- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; +- /* set the bus interface characteristics based on +- tDS Data Set up Time 30 - ns +- tDH Data Hold Time 20 - ns +- tALS ALE Set up Time 20 - ns +- 16ns at 60 MHz ~= 3 */ + /*memory mapping structures */ + #define SM_ID_RWH (5 << 28) + #define SM_RWH (1 << 28) + #define SM_RWS (0 << 24) + #define SM_TDF (1 << 8) + #define SM_NWS (3) +- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS | +- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 | +- SM_TDF | AT91C_SMC2_WSEN | SM_NWS); ++ ++#define SMARTMEDIA_INIT ( \ ++ SM_RWH | \ ++ SM_RWS | \ ++ AT91C_SMC2_ACSS_STANDARD | \ ++ AT91C_SMC2_DBW_8 | \ ++ SM_TDF | \ ++ AT91C_SMC2_WSEN | \ ++ SM_NWS \ ++ ) ++ ++ ++ ++#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ ++void nand_init (void) ++{ ++ /* Setup Smart Media, fitst enable the address range of CS3 */ ++ /* *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; */ ++ at91_sys_setbit(AT91C_EBI_CS3A_SMC_SmartMedia, AT91_EBI_CSA); ++ ++ /* Init Smartmedia Interface */ ++ at91_sys_write(AT91_SMC2_CSR3, SMARTMEDIA_INIT); + + /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ +- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | +- AT91C_PC3_BFBAA_SMWE; +- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | +- AT91C_PC3_BFBAA_SMWE; ++ at91_set_A_periph(AT91_PIN_PC0, 0); /* BFCK */ ++ at91_set_A_periph(AT91_PIN_PC1, 0); /* BFRDY/SMOE */ ++ at91_set_A_periph(AT91_PIN_PC3, 0); /* BFBAA/SMWE */ + + /* Configure PC2 as input (signal READY of the SmartMedia) */ +- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ +- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ ++ at91_set_gpio_input(AT91_PIN_PC2, 0); + + /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ +- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ +- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ ++ at91_set_gpio_input(AT91_PIN_PB1, 0); + + /* PIOB and PIOC clock enabling */ +- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; +- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOB); ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOC); + +- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) ++ if (at91_get_gpio_value(AT91_PIN_PB1)) + printf (" No SmartMedia card inserted\n"); + #ifdef DEBUG + printf (" SmartMedia card inserted\n"); +@@ -140,3 +159,4 @@ + printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20); + } + #endif ++ +diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c u-boot-2009.01/board/atmel/at91rm9200dk/led.c +--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c 2009-01-01 13:09:31.000000000 +0100 ++++ u-boot-2009.01/board/atmel/at91rm9200dk/led.c 2009-01-01 15:53:56.000000000 +0100 +@@ -24,57 +24,105 @@ + + #include <common.h> + #include <asm/arch/AT91RM9200.h> ++/*#include <asm/arch/at91_pmc.h>*/ ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> + +-#define GREEN_LED AT91C_PIO_PB0 +-#define YELLOW_LED AT91C_PIO_PB1 +-#define RED_LED AT91C_PIO_PB2 ++#define GREEN_LED AT91_PIN_PB0 ++#define YELLOW_LED AT91_PIN_PB1 ++#define RED_LED AT91_PIN_PB2 + +-void green_LED_on(void) ++ ++#define GREEN_LED_ON 0 ++#define GREEN_LED_OFF 1 ++#define YELLOW_LED_ON 0 ++#define YELLOW_LED_OFF 1 ++#define RED_LED_ON 0 ++#define RED_LED_OFF 1 ++ ++#define TIME_SLICE 500000 ++ ++void yellow_LED_on(void) ++{ ++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_ON); ++} ++ ++void yellow_LED_off(void) ++{ ++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF); ++} ++ ++void red_LED_on(void) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- PIOB->PIO_CODR = GREEN_LED; ++ at91_set_gpio_value(RED_LED, RED_LED_ON); + } + +-void yellow_LED_on(void) ++void red_LED_off(void) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- PIOB->PIO_CODR = YELLOW_LED; ++ at91_set_gpio_value(RED_LED, RED_LED_OFF); + } + +-void red_LED_on(void) ++void green_LED_on(void) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- PIOB->PIO_CODR = RED_LED; ++ at91_set_gpio_value(GREEN_LED, GREEN_LED_ON); + } + +-void green_LED_off(void) ++void green_LED_off(void) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- PIOB->PIO_SODR = GREEN_LED; ++ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF); + } + +-void yellow_LED_off(void) ++static void delay(unsigned int time) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- PIOB->PIO_SODR = YELLOW_LED; ++ volatile unsigned int counter = time; ++ while(counter > 0) counter--; + } + +-void red_LED_off(void) ++void green_LED_blink(unsigned int time) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- PIOB->PIO_SODR = RED_LED; ++ while(time > 0) { ++ green_LED_on(); ++ delay(TIME_SLICE); ++ green_LED_off(); ++ delay(TIME_SLICE); ++ time--; ++ } + } + ++void yellow_LED_blink(unsigned int time) ++{ ++ while(time > 0) { ++ yellow_LED_on(); ++ delay(TIME_SLICE); ++ yellow_LED_off(); ++ delay(TIME_SLICE); ++ time--; ++ } ++} + +-void coloured_LED_init (void) ++void red_LED_blink(unsigned int time) + { +- AT91PS_PIO PIOB = AT91C_BASE_PIOB; +- AT91PS_PMC PMC = AT91C_BASE_PMC; +- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */ +- /* Disable peripherals on LEDs */ +- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; +- /* Enable pins as outputs */ +- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; +- /* Turn all LEDs OFF */ +- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; ++ while(time > 0) { ++ red_LED_on(); ++ delay(TIME_SLICE); ++ red_LED_off(); ++ delay(TIME_SLICE); ++ time--; ++ } + } ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91C_PMC_PCER, 1 << AT91RM9200_ID_PIOB); ++ ++ at91_set_gpio_output(GREEN_LED, 1); ++ at91_set_gpio_output(YELLOW_LED, 1); ++ at91_set_gpio_output(RED_LED, 1); ++ ++ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF); ++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF); ++ at91_set_gpio_value(RED_LED, RED_LED_ON); ++} ++ ++ +diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c u-boot-2009.01/board/atmel/at91rm9200dk/mux.c +--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c 2009-01-01 13:09:31.000000000 +0100 ++++ u-boot-2009.01/board/atmel/at91rm9200dk/mux.c 2009-01-01 16:38:01.000000000 +0100 +@@ -1,37 +1,29 @@ + #include <config.h> + #include <common.h> + #include <asm/hardware.h> ++#include <asm/arch/at91_pio.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> + #include <dataflash.h> + + int AT91F_GetMuxStatus(void) { +-#ifdef DATAFLASH_MMC_SELECT +- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */ +- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */ +- +- +- if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) { +- return 1; +- } else { +- return 0; +- } +-#endif ++#ifdef CONFIG_CMD_AT91_SPIMUX ++ return at91_get_gpio_value(DATAFLASH_MMC_SELECT); ++#else + return 0; ++#endif + } + +-void AT91F_SelectMMC(void) { +-#ifdef DATAFLASH_MMC_SELECT +- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */ +- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */ +- /* Set Output */ +- AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT; ++void AT91F_SelectMMC(void) ++{ ++#ifdef CONFIG_CMD_AT91_SPIMUX ++ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 1); /* Set in PIO mode and select SD-Card*/ + #endif + } + + void AT91F_SelectSPI(void) { +-#ifdef DATAFLASH_MMC_SELECT +- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */ +- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */ +- /* Clear Output */ +- AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT; ++#ifdef CONFIG_CMD_AT91_SPIMUX ++ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 0); /* Set in PIO mode and select SPI */ + #endif + } ++ + diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch new file mode 100644 index 000000000..4d22c5334 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch @@ -0,0 +1,536 @@ +diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h +--- u-boot-2009.01-0rig/include/configs/at91rm9200df.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200df.h 2009-01-01 21:19:17.000000000 +0100 +@@ -0,0 +1,261 @@ ++/* ++ * Rick Bronson <rick@efn.org> ++ * ++ * Ulf Samuelsson <ulf.samuelsson@atmel.com> ++ * ++ * Configuration settings for the AT91RM9200EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DF ++#define CONFIG_HOSTNAME at91rm9200df ++/* ARM asynchronous clock */ ++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ ++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ ++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ ++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ ++#define CONFIG_AT91RM9200DF 1 /* Generic AT91RM9200 Board running from Dataflashcard */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++#define USE_920T_MMU 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* Already done by dataflashboot */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 ++/* flash */ ++#define MC_PUIA_VAL 0x00000000 ++#define MC_PUP_VAL 0x00000000 ++#define MC_PUER_VAL 0x00000000 ++#define MC_ASR_VAL 0x00000000 ++#define MC_AASR_VAL 0x00000000 ++#define EBI_CFGR_VAL 0x00000000 ++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ ++ ++/* clocks */ ++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ ++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ ++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ ++ ++/* sdram */ ++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ ++#define PIOC_BSR_VAL 0x00000000 ++#define PIOC_PDR_VAL 0xFFFF0000 ++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ ++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ ++#define SDRAM 0x20000000 /* address of the SDRAM */ ++#define SDRAM1 0x20000080 /* address of the SDRAM */ ++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ ++#define SDRC_MR_VAL 0x00000002 /* Precharge All */ ++#define SDRC_MR_VAL1 0x00000004 /* refresh */ ++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ ++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ ++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ ++#else ++#define CONFIG_SKIP_RELOCATE_UBOOT ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++/* ++ * Size of malloc() pool ++ */ ++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* define one of these to choose the DBGU, USART0 or USART1 as console */ ++#define CONFIG_DBGU ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++ ++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ ++ ++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ ++ ++#define CONFIG_BOOTDELAY 3 ++/* #define CONFIG_ENV_OVERWRITE 1 */ ++ ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_AT91_SPIMUX ++#define CONFIG_CMD_ETHINIT ++ ++#define CONFIG_DOS_PARTITION 1 ++#define CONFIG_MMC 1 ++#define CONFIG_SUPPORT_VFAT 1 ++#define CONFIG__MMC_BASE 0xFFFB4000 /* From AT91RM9200.h*/ ++#define CONFIG__MMC_BLOCKSIZE 512 ++ ++#define CONFIG_NAND_LEGACY ++ ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define SECTORSIZE 512 ++ ++#define ADDR_COLUMN 1 ++#define ADDR_PAGE 2 ++#define ADDR_COLUMN_PAGE 3 ++ ++#define NAND_ChipID_UNKNOWN 0x00 ++#define NAND_MAX_FLOORS 1 ++#define NAND_MAX_CHIPS 1 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ ++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ ++ ++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ ++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) ++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) ++ ++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) ++ ++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) ++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) ++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) ++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) ++/* the following are NOP's in our implementation */ ++#define NAND_CTL_CLRALE(nandptr) ++#define NAND_CTL_SETALE(nandptr) ++#define NAND_CTL_CLRCLE(nandptr) ++#define NAND_CTL_SETCLE(nandptr) ++ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ ++ ++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM ++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 ++ ++#define CONFIG_DRIVER_ETHER ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_AT91C_USE_RMII ++ ++/* AC Characteristics */ ++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0xC << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++#define CONFIG_HAS_DATAFLASH 1 ++#undef BOARD_LATE_INIT ++ ++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) ++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 ++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ ++#define CONFIG__SUPPORT_BLOCK_ERASE 1 ++ ++#define PHYS_FLASH_1 0x10000000 ++#define PHYS_FLASH_SIZE 0x800000 /* 2 megs main flash */ ++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_MAX_FLASH_BANKS 1 ++#define CONFIG_SYS_MAX_FLASH_SECT 256 ++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ ++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ ++ ++#define CONFIG_ENV_IS_IN_DATAFLASH ++#define CONFIG_NEW_PARTITION 1 ++ ++#ifdef CONFIG_ENV_IS_IN_DATAFLASH ++#ifdef CONFIG_NEW_PARTITION ++#define CONFIG_ENV_OFFSET 0x21000 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/ ++#else ++#define CONFIG_ENV_OFFSET 0x20000 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#endif ++#else ++#define CONFIG_ENV_IS_IN_FLASH 1 ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#else ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ ++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ ++ ++#if defined(CONFIG_AT91RM9200DK) ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 ++#else ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 ++#endif ++ ++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ ++ ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) ++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ ++#else ++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++ ++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } ++ ++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ ++ ++#define CONFIG_SYS_HZ 1000 ++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ ++ /* AT91C_TC_TIMER_DIV1_CLOCK */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++#endif +diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h +--- u-boot-2009.01-0rig/include/configs/at91rm9200ek.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200ek.h 2009-01-01 17:13:31.000000000 +0100 +@@ -0,0 +1,251 @@ ++/* ++ * Rick Bronson <rick@efn.org> ++ * ++ * Ulf Samuelsson <ulf.samuelsson@atmel.com> ++ * ++ * Configuration settings for the AT91RM9200EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200EK ++#define CONFIG_HOSTNAME at91rm9200ek ++/* ARM asynchronous clock */ ++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ ++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ ++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ ++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ ++#define CONFIG_AT91RM9200EK 1 /* on an AT91RM9200EK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++#define USE_920T_MMU 1 ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 ++/* flash */ ++#define MC_PUIA_VAL 0x00000000 ++#define MC_PUP_VAL 0x00000000 ++#define MC_PUER_VAL 0x00000000 ++#define MC_ASR_VAL 0x00000000 ++#define MC_AASR_VAL 0x00000000 ++#define EBI_CFGR_VAL 0x00000000 ++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ ++ ++/* clocks */ ++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ ++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ ++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ ++ ++/* sdram */ ++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ ++#define PIOC_BSR_VAL 0x00000000 ++#define PIOC_PDR_VAL 0xFFFF0000 ++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ ++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ ++#define SDRAM 0x20000000 /* address of the SDRAM */ ++#define SDRAM1 0x20000080 /* address of the SDRAM */ ++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ ++#define SDRC_MR_VAL 0x00000002 /* Precharge All */ ++#define SDRC_MR_VAL1 0x00000004 /* refresh */ ++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ ++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ ++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ ++#else ++#define CONFIG_SKIP_RELOCATE_UBOOT ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++/* ++ * Size of malloc() pool ++ */ ++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* define one of these to choose the DBGU, USART0 or USART1 as console */ ++#define CONFIG_DBGU ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++ ++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ ++ ++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ ++ ++#define CONFIG_BOOTDELAY 3 ++/* #define CONFIG_ENV_OVERWRITE 1 */ ++ ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_AT91_SPIMUX ++#define CONFIG_CMD_ETHINIT ++ ++#define CONFIG_NAND_LEGACY ++ ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define SECTORSIZE 512 ++ ++#define ADDR_COLUMN 1 ++#define ADDR_PAGE 2 ++#define ADDR_COLUMN_PAGE 3 ++ ++#define NAND_ChipID_UNKNOWN 0x00 ++#define NAND_MAX_FLOORS 1 ++#define NAND_MAX_CHIPS 1 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ ++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ ++ ++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ ++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) ++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) ++ ++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) ++ ++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) ++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) ++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) ++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) ++/* the following are NOP's in our implementation */ ++#define NAND_CTL_CLRALE(nandptr) ++#define NAND_CTL_SETALE(nandptr) ++#define NAND_CTL_CLRCLE(nandptr) ++#define NAND_CTL_SETCLE(nandptr) ++ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ ++ ++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM ++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 ++ ++#define CONFIG_DRIVER_ETHER ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_AT91C_USE_RMII ++ ++/* AC Characteristics */ ++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0xC << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) ++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 ++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ ++#define CONFIG__SUPPORT_BLOCK_ERASE 1 ++ ++#define PHYS_FLASH_1 0x10000000 ++#define PHYS_FLASH_SIZE 0x800000 /* 2 megs main flash */ ++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_MAX_FLASH_BANKS 1 ++#define CONFIG_SYS_MAX_FLASH_SECT 256 ++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ ++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ ++ ++#undef CONFIG_ENV_IS_IN_DATAFLASH ++#define CONFIG_NEW_PARTITION 1 ++ ++#ifdef CONFIG_ENV_IS_IN_DATAFLASH ++#ifdef CONFIG_NEW_PARTITION ++#define CONFIG__ENV_OFFSET 0x21000 ++#define CONFIG__ENV_ADDR (CONFIG_SYS__DATAFLASH_LOGIC_ADDR_CS0 + CONFIG__ENV_OFFSET) ++#define CONFIG__ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/ ++> #else ++#define CONFIG_ENV_OFFSET 0x20000 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#endif ++#else ++#define CONFIG_ENV_IS_IN_FLASH 1 ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#else ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ ++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ ++ ++#if defined(CONFIG_AT91RM9200DK) ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 ++#else ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 ++#endif ++ ++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ ++ ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) ++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ ++#else ++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++ ++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } ++ ++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ ++ ++#define CONFIG_SYS_HZ 1000 ++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ ++ /* AT91C_TC_TIMER_DIV1_CLOCK */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++#endif +diff -urN u-boot-2009.01-0rig/Makefile u-boot-2009.01/Makefile +--- u-boot-2009.01-0rig/Makefile 2009-01-02 10:03:11.000000000 +0100 ++++ u-boot-2009.01/Makefile 2009-01-01 21:31:34.000000000 +0100 +@@ -2568,6 +2568,12 @@ + at91rm9200dk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + ++at91rm9200df_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 ++ ++at91rm9200ek_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 ++ + cmc_pu2_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch new file mode 100644 index 000000000..b87a655e6 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch @@ -0,0 +1,801 @@ +diff -urN u-boot-2008.10-0rig/Makefile u-boot-2008.10/Makefile +--- u-boot-2008.10-0rig/Makefile 2008-12-28 14:07:30.000000000 +0100 ++++ u-boot-2008.10/Makefile 2008-12-28 14:06:28.000000000 +0100 +@@ -2541,6 +2541,22 @@ + fi; + @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + ++at91sam9g20ek_nandflash_config \ ++at91sam9g20ek_dataflash_cs0_config \ ++at91sam9g20ek_dataflash_cs1_config \ ++at91sam9g20ek_config : unconfig ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CONFIG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CONFIG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CONFIG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91 ++ + at91sam9261ek_nandflash_config \ + at91sam9261ek_dataflash_cs0_config \ + at91sam9261ek_dataflash_cs3_config \ +Index: include/configs/at91sam9g20ek.h +=================================================================== +--- a/include/configs/at91sam9g20ek.h (.../u-boot-1.3.4) (revision 0) ++++ b/include/configs/at91sam9g20ek.h (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,198 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9G20EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_MAIN_CLOCK 396288000 /* from 18.432 MHz crystal */ ++#define AT91_MASTER_CLOCK 132096000 /* peripheral = main / 3 */ ++#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ ++#define CONFIG_AT91SAM9G20EK 1 /* on an AT91SAM9G20EK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++#define CONFIG_BOOTDELAY 3 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) ++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x22 << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++#define AT91SAM9260_BASE_SPI0 0xfffc8000 ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 ++#define CONFIG_SYS_NAND_BASE 0x40000000 ++#define CONFIG_SYS_NAND_DBW_8 1 ++ ++/* NOR flash - no real flash on this board */ ++#define CONFIG_SYS_NO_FLASH 1 ++ ++/* Ethernet */ ++#define CONFIG_MACB 1 ++#define CONFIG_RMII 1 ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++#define AT91SAM9260_BASE_EMAC 0xfffc4000 ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 ++#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */ ++#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" ++#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM ++#define CONFIG_SYS_MEMTEST_END 0x23e00000 ++ ++#ifdef CONFIG_USE_DATAFLASH_CS0 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CONFIG_ENV_IS_IN_DATAFLASH 1 ++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CONFIG_ENV_OFFSET 0x4200 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#elif CONFIG_USE_DATAFLASH_CS1 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS1 */ ++#define CONFIG_ENV_IS_IN_DATAFLASH 1 ++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) ++#define CONFIG_ENV_OFFSET 0x4200 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#else /* CONFIG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CONFIG_ENV_IS_IN_NAND 1 ++#define CONFIG_ENV_OFFSET 0x60000 ++#define CONFIG_ENV_OFFSET_REDUND 0x80000 ++#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock5 " \ ++ "mtdparts=at91_nand:128k(bootstrap)ro," \ ++ "256k(uboot)ro,128k(env1)ro," \ ++ "128k(env2)ro,2M(linux),-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CONFIG_SYS_PROMPT "U-Boot> " ++#define CONFIG_SYS_CBSIZE 256 ++#define CONFIG_SYS_MAXARGS 16 ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) ++#define CONFIG_SYS_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +Index: board/atmel/at91sam9g20ek/nand.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,78 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 21) /* our ALE is AD21 */ ++#define MASK_CLE (1 << 22) /* our CLE is AD22 */ ++ ++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, ++ int cmd, unsigned int ctrl) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (ctrl & NAND_CTRL_CHANGE) { ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); ++ ++ if (ctrl & NAND_CLE) ++ IO_ADDR_W |= MASK_CLE; ++ if (ctrl & NAND_ALE) ++ IO_ADDR_W |= MASK_ALE; ++ ++ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++ } ++ ++ if (cmd != NAND_CMD_NONE) ++ writeb(cmd, this->IO_ADDR_W); ++} ++ ++static int at91sam9g20ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC13); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->ecc.mode = NAND_ECC_SOFT; ++#ifdef CONFIG_SYS_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->cmd_ctrl = at91sam9g20ek_nand_hwcontrol; ++ nand->dev_ready = at91sam9g20ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/at91sam9g20ek.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/at91sam9g20ek.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,250 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/at91sam9260_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) ++#include <net.h> ++#endif ++#include <netdev.h> ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91sam9g20ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91sam9g20ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CONFIG_SYS_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CONFIG_SYS_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(3)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC13, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91sam9g20ek_spi_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ ++ at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_MACB ++static void at91sam9g20ek_macb_hw_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); ++ ++ /* ++ * Disable pull-up on: ++ * RXDV (PA17) => PHY normal mode (not Test mode) ++ * ERX0 (PA14) => PHY ADDR0 ++ * ERX1 (PA15) => PHY ADDR1 ++ * ERX2 (PA25) => PHY ADDR2 ++ * ERX3 (PA26) => PHY ADDR3 ++ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 ++ * ++ * PHY has internal pull-down ++ */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); ++ ++ /* Need to reset PHY -> 500ms reset */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0D << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); ++ ++ /* Wait for end hardware reset */ ++ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); ++ ++ /* Restore NRST value */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0 << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ /* Re-enable pull-up */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUER); ++ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ ++ ++#ifndef CONFIG_RMII ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ ++#if defined(CONFIG_AT91SAM9G20EK) ++ /* ++ * use PA10, PA11 for ETX2, ETX3. ++ * PA23 and PA24 are for TWI EEPROM ++ */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++#else ++ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ ++#endif ++ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++#endif ++ ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9G20EK-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91sam9g20ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91sam9g20ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91sam9g20ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_MACB ++ at91sam9g20ek_macb_hw_init(); ++#endif ++ ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_MACB ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +Index: board/atmel/at91sam9g20ek/led.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/led.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/led.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,64 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#define RED_LED AT91_PIN_PA9 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PA6 /* this is the user led */ ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++} +Index: board/atmel/at91sam9g20ek/partition.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/partition.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/partition.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,40 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { ++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1} ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +Index: board/atmel/at91sam9g20ek/config.mk +=================================================================== +--- a/board/atmel/at91sam9g20ek/config.mk (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/config.mk (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1 @@ ++TEXT_BASE = 0x23f00000 +Index: board/atmel/at91sam9g20ek/Makefile +=================================================================== +--- a/board/atmel/at91sam9g20ek/Makefile (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/Makefile (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9g20ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +Index: include/asm-arm/arch-at91/hardware.h +=================================================================== +--- a/include/asm-arm/arch-at91/hardware.h (.../u-boot-1.3.4) (revision 8417) ++++ b/include/asm-arm/arch-at91/hardware.h (.../u-boot-1.3.4-exp) (revision 8417) +@@ -18,7 +18,7 @@ + + #if defined(CONFIG_AT91RM9200) + #include <asm/arch/at91rm9200.h> +-#elif defined(CONFIG_AT91SAM9260) ++#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) + #include <asm/arch/at91sam9260.h> + #define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC + #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 +diff -urN u-boot-2008.10-0rig/include/asm-arm/mach-types.h u-boot-2008.10/include/asm-arm/mach-types.h +--- u-boot-2008.10-0rig/include/asm-arm/mach-types.h 2008-10-18 21:30:31.000000000 +0200 ++++ u-boot-2008.10/include/asm-arm/mach-types.h 2008-12-28 23:40:55.000000000 +0100 +@@ -23998,6 +23998,18 @@ + # define machine_is_geneva() (0) + #endif + ++#ifdef CONFIG_MACH_AT91SAM9G20EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G20EK ++# endif ++# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK) ++#else ++# define machine_is_at91sam9g20ek() (0) ++#endif ++ + /* + * These have not yet been registered + */ +diff -urN u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c +--- u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2008-12-28 14:09:52.000000000 +0100 ++++ u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2008-12-28 23:56:09.000000000 +0100 +@@ -248,3 +248,13 @@ + #endif + } + #endif ++ ++int board_eth_init(bd_t *bis) ++{ ++ int rc = 0; ++#ifdef CONFIG_MACB ++ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); ++#endif ++ return rc; ++} ++ diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-006-drivers-net-macb.c.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-006-drivers-net-macb.c.patch new file mode 100644 index 000000000..81ab7c6e6 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-006-drivers-net-macb.c.patch @@ -0,0 +1,28 @@ +diff -urN u-boot-2008.10-0rig/drivers/net/macb.c u-boot-2008.10/drivers/net/macb.c +--- u-boot-2008.10-0rig/drivers/net/macb.c 2008-10-18 21:30:31.000000000 +0200 ++++ u-boot-2008.10/drivers/net/macb.c 2008-12-28 23:44:11.000000000 +0100 +@@ -415,18 +415,16 @@ + + /* choose RMII or MII mode. This depends on the board */ + #ifdef CONFIG_RMII +-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) +- macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); +-#else ++#if defined(CONFIG_AVR32) + macb_writel(macb, USRIO, 0); +-#endif + #else +-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) +- macb_writel(macb, USRIO, MACB_BIT(CLKEN)); ++ macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); ++#endif + #else ++#if defined(CONFIG_AVR32) + macb_writel(macb, USRIO, MACB_BIT(MII)); ++#else ++ macb_writel(macb, USRIO, MACB_BIT(CLKEN)); + #endif + #endif /* CONFIG_RMII */ + diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch new file mode 100644 index 000000000..8f71ee043 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch @@ -0,0 +1,576 @@ +diff -urN u-boot-2008.10-0rig//tools/Makefile u-boot-2008.10/tools/Makefile +--- u-boot-2008.10-0rig//tools/Makefile 2008-12-31 17:51:29.000000000 +0100 ++++ u-boot-2008.10/tools/Makefile 2008-12-31 19:38:15.000000000 +0100 +@@ -37,6 +37,11 @@ + #OBJ_FILES += mpc86x_clk.o + #endif + ++ifeq ($(VENDOR),atmel) ++BINS+= raw-at91$(SFX) sx-at91$(SFX) ++OBJS+= raw-at91.o sx-at91.o ++endif ++ + LIBFDT_OBJ_FILES = $(obj)fdt.o $(obj)fdt_ro.o $(obj)fdt_rw.o $(obj)fdt_strerror.o $(obj)fdt_wip.o + + LOGO_H = $(OBJTREE)/include/bmp_logo.h +@@ -175,6 +180,14 @@ + $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(STRIP) $@ + ++$(obj)raw-at91$(SFX): $(obj)raw-at91.o ++ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ ++ $(STRIP) $@ ++ ++$(obj)sx-at91$(SFX): $(obj)sx-at91.o ++ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ ++ $(STRIP) $@ ++ + $(obj)envcrc.o: $(src)envcrc.c + $(CC) -g $(CFLAGS) -c -o $@ $< + +@@ -223,6 +236,12 @@ + $(obj)fdt_wip.o: $(obj)fdt_wip.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + ++$(obj)sx-at91.o: $(src)sx-at91.c ++ $(CC) -g $(CFLAGS) -c -o $@ $< ++ ++$(obj)raw-at91.o: $(src)raw-at91.c ++ $(CC) -g $(CFLAGS) -c -o $@ $< ++ + subdirs: + ifeq ($(TOOLSUBDIRS),) + @: +diff -urN u-boot-2008.10-0rig//tools/raw-at91.c u-boot-2008.10/tools/raw-at91.c +--- u-boot-2008.10-0rig//tools/raw-at91.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2008.10/tools/raw-at91.c 2008-12-31 19:26:23.000000000 +0100 +@@ -0,0 +1,225 @@ ++/* ++ * xmodem-at91.c ++ * ++ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board. ++ * Created by (C) Copyright 2004 ++ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn. ++ * ++ ************************************************************************************* ++ * ++ * Modified 01-Feb-2005 (C)Copyright 2005 ++ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com ++ * - edited indentations and changed break usage in switch statement. ++ * - added "\r" to printf ++ * ++ * - build with ++ * gcc sx-at91.c -o sx-at91 ++ * ++ * - Howto use this program with minicom/xminicom and AT91 ++ * start minicom or xminicom ++ * edit Options / File transfer protocol, ++ * add a name (for example J) like the following example ++ * ++ * | Name Program Name U/D FullScr IO-Red. Multi | ++ * | A zmodem /usr/bin/sz -vv -b Y U N Y Y | ++ * | B ymodem /usr/bin/sb -vv Y U N Y Y | ++ * | C xmodem /usr/bin/sx -vv Y U N Y N | ++ * | D zmodem /usr/bin/rz -vv -b -E N D N Y Y | ++ * | E ymodem /usr/bin/rb -vv N D N Y Y | ++ * | F xmodem /usr/bin/rx -vv Y D N Y N | ++ * | G kermit /usr/bin/kermit -i -l %l -s Y U Y N N | ++ * | H kermit /usr/bin/kermit -i -l %l -r N D Y N N | ++ * | I ascii /usr/bin/ascii-xfr -dsv Y U N Y N | ++ * | J at91 /home/koan/xmodem/xs-at91 Y U Y N N | ++ * | K - | ++ * | L - | ++ * ++ * save and use it selecting at91 protocol when you start an Xmodem upload to AT91 ++ * ++ ************************************************************************************* ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <unistd.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <fcntl.h> ++#include <termios.h> ++#include <errno.h> ++#include <time.h> ++ ++#define TRUE 1 ++#define FALSE 0 ++#define LINESIZE 1024 ++ ++/*********/ ++ ++#define SERIAL_DEVICE "/dev/ttyS0" ++#define MYBAUDRATE B115200 ++ ++/***************SUB PROGRAM*******/ ++ ++int Initial_SerialPort(void) ++{ ++ int fd; ++ struct termios options; ++ ++ fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY ); ++ if ( fd == -1 ) ++ { ++ /*open error!*/ ++ perror("Can't open serial port!"); ++ return -1; ++ } ++ ++ /*Get the current options for the port...*/ ++ tcgetattr(fd, &options); ++ ++ /*Set the baud rates to BAUDRATE...*/ ++ cfsetispeed(&options,MYBAUDRATE); ++ cfsetospeed(&options,MYBAUDRATE); ++ tcsetattr(fd, TCSANOW, &options); ++ if (0 != tcgetattr(fd, &options)) ++ { ++ perror("SetupSerial 1"); ++ return -1; ++ } ++ ++ /* ++ * 8bit Data,no partity,1 stop bit... ++ */ ++ options.c_cflag &= ~PARENB; ++ options.c_cflag &= ~CSTOPB; ++ options.c_cflag &= ~CSIZE; ++ options.c_cflag |= CS8; ++ tcflush(fd,TCIFLUSH); ++ ++ /***Choosing Raw Input*/ ++ options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); ++ options.c_oflag &= ~OPOST; ++ ++ /* ++ * Set the new options for the port... ++ */ ++ if (0 != tcsetattr(fd, TCSANOW, &options)) ++ { ++ perror("SetupSerial error"); ++ return -1 ; ++ } ++ ++ return fd ; ++} ++ ++/******************************/ ++void ClearReceiveBuffer(int fd) ++{ ++ unsigned char tmp; ++ while ((read(fd,&tmp,1))>0); ++ ++ return; ++} ++unsigned char filebuf[ LINESIZE+2 ]; ++unsigned char outbuf[ LINESIZE+2 ]; ++FILE *datafile; ++int fd; ++ ++static unsigned int ChCnt=0; ++static unsigned int ChIx; ++unsigned char GetChar(unsigned char *ch) ++/* ++ * SUCCESS: Return TRUE ++ * FAILURE: Return FALSE ++ */ ++{ ++ ++ if(ChCnt == 0) { ++ ChCnt = fread( filebuf, sizeof(char), LINESIZE, datafile); ++ ChIx = 0; ++ } ++ if(ChCnt > 0) { ++ *ch = filebuf[ChIx++]; ++ ChCnt--; ++ return TRUE; ++ } else { ++ return FALSE; /* Reached End of File */ ++ } ++} ++ ++/********************************/ ++void delay() ++{ ++} ++ ++int main(int argc,char *argv[]) ++{ ++ char *data_file_name; ++ int len; ++ unsigned char c; ++ int complete,i,sts; ++ ++ printf("raw-at91 started...\r\n"); ++ ++ /* open serial port1 */ ++ if ( (fd = Initial_SerialPort()) == -1) ++ return -1 ; ++ ++ data_file_name = argv[1]; ++ ++ if((datafile=fopen(data_file_name,"rb"))==NULL) ++ { ++ perror ("Can't open file!"); ++ return -1 ; ++ } ++ ++ /*******************************/ ++ ++ complete = 0; ++ /* ClearReceiveBuffer(fd); */ ++ ++ /* while((read(fd,&ack_id,1))<=0);*/ ++ ++ /* printf("%c\r\n",ack_id); */ ++ while(!complete) ++ { ++ for(i=0;i < LINESIZE; i++) { /* A line more than 1024 characters will have problems...*/ ++ if((sts = GetChar(&outbuf[i]))) { ++ /* Sts = Success */ ++ if((c = outbuf[i]) == '\n') { /* Found end of Line - Start Processing*/ ++ outbuf[i+1] = '\0'; /* Terminate String*/ ++ break; ++ } ++ } else { ++ /* Sts = Failure - End of File */ ++ outbuf[i] = '\n'; ++ outbuf[i+1] = '\0'; ++ complete = 1; ++ } ++ } ++ printf("%s",outbuf); /* Inform user */ ++ len = strlen((char *)outbuf); ++ write(fd,outbuf,strlen((char *)outbuf)); ++ for(i = 0; i < 500000000; i++ ) delay(); ++ while((read(fd,&c,1))<=0) putchar(c); ++ printf(" "); ++ } ++ fclose(datafile); ++ close(fd); ++ return 0; ++} +diff -urN u-boot-2008.10-0rig//tools/sx-at91.c u-boot-2008.10/tools/sx-at91.c +--- u-boot-2008.10-0rig//tools/sx-at91.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2008.10/tools/sx-at91.c 2008-12-31 19:26:23.000000000 +0100 +@@ -0,0 +1,300 @@ ++/* ++ * xmodem-at91.c ++ * ++ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board. ++ * Created by (C) Copyright 2004 ++ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn. ++ * ++ ************************************************************************************* ++ * ++ * Modified 01-Feb-2005 (C)Copyright 2005 ++ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com ++ * - edited indentations and changed break usage in switch statement. ++ * - added "\r" to printf ++ * ++ * - build with ++ * gcc sx-at91.c -o sx-at91 ++ * ++ * - Howto use this program with minicom/xminicom and AT91 ++ * start minicom or xminicom ++ * edit Options / File transfer protocol, ++ * add a name (for example J) like the following example ++ * ++ * | Name Program Name U/D FullScr IO-Red. Multi | ++ * | A zmodem /usr/bin/sz -vv -b Y U N Y Y | ++ * | B ymodem /usr/bin/sb -vv Y U N Y Y | ++ * | C xmodem /usr/bin/sx -vv Y U N Y N | ++ * | D zmodem /usr/bin/rz -vv -b -E N D N Y Y | ++ * | E ymodem /usr/bin/rb -vv N D N Y Y | ++ * | F xmodem /usr/bin/rx -vv Y D N Y N | ++ * | G kermit /usr/bin/kermit -i -l %l -s Y U Y N N | ++ * | H kermit /usr/bin/kermit -i -l %l -r N D Y N N | ++ * | I ascii /usr/bin/ascii-xfr -dsv Y U N Y N | ++ * | J at91 /home/koan/xmodem/xs-at91 Y U Y N N | ++ * | K - | ++ * | L - | ++ * ++ * save and use it selecting at91 protocol when you start an Xmodem upload to AT91 ++ * ++ ************************************************************************************* ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <stdio.h> ++#include <stdlib.h> ++#include <unistd.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <fcntl.h> ++#include <termios.h> ++#include <errno.h> ++#include <time.h> ++ ++/* ++Xmodem Frame form: <SOH><blk #><255-blk #><--128 data bytes--><CRC hi><CRC lo> ++*/ ++ ++#define XMODEM_SOH 0x01 ++#define XMODEM_STX 0x02 ++#define XMODEM_EOT 0x04 ++#define XMODEM_ACK 0x06 ++#define XMODEM_NAK 0x15 ++#define XMODEM_CRC_CHR 'C' ++#define XMODEM_CRC_SIZE 2 /* Crc_High Byte + Crc_Low Byte */ ++#define XMODEM_FRAME_ID_SIZE 2 /* Frame_Id + 255-Frame_Id */ ++#define XMODEM_DATA_SIZE_SOH 128 /* for Xmodem protocol */ ++#define XMODEM_DATA_SIZE_STX 1024 /* for 1K xmodem protocol */ ++#define USE_1K_XMODEM 0 /* 1 for use 1k_xmodem 0 for xmodem */ ++ ++#if (USE_1K_XMODEM) ++ #define XMODEM_DATA_SIZE XMODEM_DATA_SIZE_STX ++ #define XMODEM_HEAD XMODEM_STX ++#else ++ #define XMODEM_DATA_SIZE XMODEM_DATA_SIZE_SOH ++ #define XMODEM_HEAD XMODEM_SOH ++#endif ++/*********/ ++ ++#define SERIAL_DEVICE "/dev/ttyS0" ++#define MYBAUDRATE B115200 ++ ++/***************SUB PROGRAM*******/ ++unsigned short GetCrc16 ( char *ptr, unsigned short count ) ++{ ++ unsigned short crc, i; ++ ++ crc = 0; ++ while(count--) ++ { ++ crc = crc ^ (int) *ptr++ << 8; ++ ++ for(i = 0; i < 8; i++) ++ { ++ if(crc & 0x8000) ++ crc = crc << 1 ^ 0x1021; ++ else ++ crc = crc << 1; ++ } ++ } ++ ++ return (crc & 0xFFFF); ++} ++ ++/*******************************/ ++int Initial_SerialPort(void) ++{ ++ int fd; ++ struct termios options; ++ ++ fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY ); ++ if ( fd == -1 ) ++ { ++ /*open error!*/ ++ perror("Can't open serial port!"); ++ return -1; ++ } ++ ++ /*Get the current options for the port...*/ ++ tcgetattr(fd, &options); ++ ++ /*Set the baud rates to BAUDRATE...*/ ++ cfsetispeed(&options,MYBAUDRATE); ++ cfsetospeed(&options,MYBAUDRATE); ++ tcsetattr(fd, TCSANOW, &options); ++ if (0 != tcgetattr(fd, &options)) ++ { ++ perror("SetupSerial 1"); ++ return -1; ++ } ++ ++ /* ++ * 8bit Data,no partity,1 stop bit... ++ */ ++ options.c_cflag &= ~PARENB; ++ options.c_cflag &= ~CSTOPB; ++ options.c_cflag &= ~CSIZE; ++ options.c_cflag |= CS8; ++ tcflush(fd,TCIFLUSH); ++ ++ /***Choosing Raw Input*/ ++ options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); ++ options.c_oflag &= ~OPOST; ++ ++ /* ++ * Set the new options for the port... ++ */ ++ if (0 != tcsetattr(fd, TCSANOW, &options)) ++ { ++ perror("SetupSerial error"); ++ return -1 ; ++ } ++ ++ return fd ; ++} ++ ++/******************************/ ++void ClearReceiveBuffer(int fd) ++{ ++ unsigned char tmp; ++ while ((read(fd,&tmp,1))>0); ++ ++ return; ++} ++ ++/********************************/ ++int main(int argc,char *argv[]) ++{ ++ int fd; ++ char *data_file_name; ++ char packet_data[ XMODEM_DATA_SIZE ]; ++ char frame_data[ XMODEM_DATA_SIZE + XMODEM_CRC_SIZE + XMODEM_FRAME_ID_SIZE + 1 ]; ++ FILE *datafile; ++ int complete,retry_num,pack_counter,read_number,write_number,i; ++ unsigned short crc_value; ++ unsigned char ack_id; ++ ++ printf("sx-at91 started...\r\n"); ++ ++ /* open serial port1 */ ++ if ( (fd = Initial_SerialPort()) == -1) ++ return -1 ; ++ ++ data_file_name = argv[1]; ++ ++ if((datafile=fopen(data_file_name,"rb"))==NULL) ++ { ++ perror ("Can't open file!"); ++ return -1 ; ++ } ++ ++ /*******************************/ ++ ++ pack_counter = 0; ++ complete = 0; ++ retry_num = 0; ++ ClearReceiveBuffer(fd); ++ ++ while((read(fd,&ack_id,1))<=0); ++ ++ printf("%c\r\n",ack_id); ++ ack_id=XMODEM_ACK; ++ while(!complete) ++ { ++ switch(ack_id) ++ { ++ case XMODEM_ACK: ++ retry_num = 0; ++ pack_counter++; ++ read_number = fread( packet_data, sizeof(char), XMODEM_DATA_SIZE, datafile); ++ if(read_number>0) ++ { ++ if(read_number<XMODEM_DATA_SIZE_SOH) ++ { ++ ++ printf("Start filling the last frame!\r\n"); ++ for(;read_number<XMODEM_DATA_SIZE;read_number++) ++ packet_data[read_number] = 0x00; ++ } ++ frame_data[0] = XMODEM_HEAD; ++ frame_data[1] = (char)pack_counter; ++ frame_data[2] = (char)(255-frame_data[1]); ++ ++ for(i=0;i<XMODEM_DATA_SIZE;i++) ++ frame_data[i+3]=packet_data[i]; ++ ++ crc_value = GetCrc16(packet_data,XMODEM_DATA_SIZE); ++ frame_data[XMODEM_DATA_SIZE_SOH+3]=(unsigned char)(crc_value >> 8); ++ frame_data[XMODEM_DATA_SIZE_SOH+4]=(unsigned char)(crc_value); ++ write_number = write( fd, frame_data, XMODEM_DATA_SIZE_SOH + 5); ++ printf("waiting for ACK,%d,%d,...",pack_counter,write_number); ++ while((read(fd,&ack_id,1))<=0); ++ ++ if(ack_id == XMODEM_ACK) ++ printf("Ok!\r\n"); ++ else ++ printf("Error!\r\n"); ++ } ++ else ++ { ++ ack_id = XMODEM_EOT; ++ complete = 1; ++ printf("Waiting for complete ACK ..."); ++ ++ while(ack_id != XMODEM_ACK) ++ { ++ ack_id = XMODEM_EOT; ++ write_number=write(fd,&ack_id,1); ++ while((read(fd,&ack_id,1))<=0); ++ } ++ printf("OK\r\n"); ++ ++ printf("Sending file complete\r\n"); ++ } ++ break; ++ ++ case XMODEM_NAK: ++ if( retry_num++ > 10) ++ { ++ printf("Retry too many times,Quit!\r\n"); ++ complete = 1; ++ } ++ else ++ { ++ write_number = write(fd,frame_data,XMODEM_DATA_SIZE + 5); ++ printf("Retry for ACK,%d,%d...",pack_counter,write_number); ++ while((read(fd,&ack_id,1))<=0); ++ ++ if( ack_id == XMODEM_ACK ) ++ printf("OK\r\n"); ++ else ++ printf("Error!\r\n"); ++ } ++ break; ++ ++ default: ++ printf("Fatal Error!\r\n"); ++ complete = 1; ++ break; ++ } ++ ++ } ++ ++ fclose(datafile); ++ close(fd); ++ ++ return 0; ++} diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-008-Makefile.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-008-Makefile.patch new file mode 100644 index 000000000..176eed55d --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-008-Makefile.patch @@ -0,0 +1,64 @@ +diff -urN u-boot-2008.10-0rig//Makefile u-boot-2008.10/Makefile +--- u-boot-2008.10-0rig//Makefile 2008-12-31 18:11:18.000000000 +0100 ++++ u-boot-2008.10/Makefile 2008-12-31 18:39:58.000000000 +0100 +@@ -20,6 +20,7 @@ + # Foundation, Inc., 59 Temple Place, Suite 330, Boston, + # MA 02111-1307 USA + # ++BUILD_DATE= $(shell date +%F) + + VERSION = 2008 + PATCHLEVEL = 10 +@@ -294,6 +295,22 @@ + ALL += $(obj)u-boot.ldr + endif + ++ifneq ($(BOARDNAME),) ++BINARY := $(BOARDNAME)-u-boot-$(U_BOOT_VERSION)-$(BUILD_DATE) ++BINARY_BIN := $(obj)$(BINARY).bin ++BINARY_GZ := $(obj)$(BINARY).gz ++ALL += $(BINARY_BIN) ++ALL += $(BINARY_GZ) ++else ++BINARY := u-boot ++BINARY_BIN := $(obj)$(BINARY).bin ++BINARY_GZ := $(obj)$(BINARY).gz ++endif ++ ++ifeq ($(DESTDIR),) ++DESTDIR=binaries ++endif ++ + all: $(ALL) + + $(obj)u-boot.hex: $(obj)u-boot +@@ -302,9 +319,20 @@ + $(obj)u-boot.srec: $(obj)u-boot + $(OBJCOPY) -O srec $< $@ + +-$(obj)u-boot.bin: $(obj)u-boot ++$(BINARY_BIN): $(obj)u-boot + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + ++$(BINARY_GZ): $(BINARY_BIN) ++ gzip -c $(BINARY_BIN) > $(BINARY_GZ) ++ ++install: all ++ -install -d $(DESTDIR) ++ install $(BINARY_BIN) $(DESTDIR) ++ ++tftp: install ++ cp $(BINARY_GZ) $(TFTPBOOT)/$(BINARY).gz ++ cp $(BINARY_BIN) $(TFTPBOOT)/$(BINARY).bin ++ + $(obj)u-boot.ldr: $(obj)u-boot + $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS) + +@@ -3295,6 +3324,7 @@ + -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ + -print0 \ + | xargs -0 rm -f ++ @rm -f $(obj)u-boot-*.gz + @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ + $(obj)cscope.* $(obj)*.*~ + @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-009-factory.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-009-factory.patch new file mode 100644 index 000000000..7d1c958dc --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-009-factory.patch @@ -0,0 +1,323 @@ +diff -urN u-boot-2009.01-0rig//common/cmd_factory.c u-boot-2009.01/common/cmd_factory.c +--- u-boot-2009.01-0rig//common/cmd_factory.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/common/cmd_factory.c 2009-01-02 19:32:07.000000000 +0100 +@@ -0,0 +1,308 @@ ++/* ++ * (C) Copyright 2000 ++ * Ulf Samuelsson <ulf.samuelsson@atmelcom>. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * Boot support ++ */ ++#include <config.h> ++#include <common.h> ++#include <command.h> ++#include <dataflash.h> ++ ++/* ++ * ++ * The typical use of this file, is to update config.h ++ * from an external build system ++ * ++ */ ++ ++ ++/* ++ * Macros to transform values ++ * into environment strings. ++ */ ++#define XMK_STR(x) #x ++#define MK_STR(x) XMK_STR(x) ++ ++void setargs(void); ++ ++int do_factory_defaults (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++#if defined(CONFIG_ETHADDR) ++ setenv("ethaddr", MK_STR(CONFIG_ETHADDR)); ++#endif ++#if defined(CONFIG_ETH1ADDR) ++ setenv("eth1addr", MK_STR(CONFIG_ETH1ADDR)); ++#endif ++#if defined(CONFIG_HOSTNAME) ++ setenv("hostname", MK_STR(CONFIG_HOSTNAME)); ++#endif ++#if defined(CONFIG_IPADDR) ++ setenv("ipaddr", MK_STR(CONFIG_IPADDR)); ++#endif ++#if defined(CONFIG_SERVERIP) ++ setenv("serverip", MK_STR(CONFIG_SERVERIP)); ++#endif ++#if defined(CONFIG_GATEWAY) ++ setenv("gatewayip", MK_STR(CONFIG_GATEWAY)); ++#endif ++#if defined(CONFIG_NETMASK) ++ setenv("netmask", MK_STR(CONFIG_NETMASK)); ++#endif ++#if defined(KERNEL_START) ++ setenv("kernel", MK_STR(KERNEL_START)); ++#endif ++#if defined(KERNEL_LOCATION) ++ setenv("OS", MK_STR(KERNEL_LOCATION)); ++#endif ++#if defined(FILESYSTEM_START) ++ setenv("ramdisk", MK_STR(FILESYSTEM_START)); ++ setenv("initrd", MK_STR(FILESYSTEM_START)","MK_STR(FILESYSTEM_SIZE)); ++#endif ++#if defined(FILESYSTEM_LOCATION) ++ setenv("FS", MK_STR(FS_LOCATION)); ++#endif ++#if defined(END_OF_FLASH) ++ setenv("endflash", MK_STR(END_OF_FLASH)); ++#endif ++#if defined(CONFIG_LOAD_SCRIPTS) ++ /* By updating the "fs-date" environment variable and running "fs" ++ You set "rd-1" and "rd-2" ++ */ ++ setenv("rd-1", "rootfs.arm-"MK_STR(DATE)".ext2"); ++ setenv("rd-2", "rootfs.arm-"MK_STR(DATE)".jffs2"); ++ setenv("rd-3", "rootfs.arm-linux.ext2"); ++ setenv("rd-4", "rootfs.arm-linux.jffs2"); ++ setenv("ver", "1"); ++ ++ setenv("config", "tftp ${ramdisk} autoscript.${hostname} ; autoscr ${ramdisk} "); ++ ++#if defined(KERNEL_VERSION) ++ setenv("kernel-version",MK_STR(KERNEL_VERSION)); ++#endif ++#if defined(DATE) ++ setenv("kernel-date", MK_STR(DATE)); ++ setenv("fs-date", MK_STR(DATE)); ++ setenv("rd", "rootfs.arm-"MK_STR(DATE)".ext2"); ++#endif ++#if defined(KERNEL_VERSION) ++ setenv("linux", MK_STR(BOARD_NAME)"-linux-"MK_STR(KERNEL_VERSION)"-"MK_STR(DATE)".gz"); ++#endif ++ setenv("get-ramdisk", "tftp ${ramdisk} ${rd}; setenv rd-size ${filesize}"); ++ setenv("store-ramdisk", "cp.b ${ramdisk} ${FS} ${rd-size}"); ++ setenv("load-ramdisk", "cp.b ${FS} ${ramdisk} ${rd-size}"); ++ setenv("flash-ramdisk", "run get-ramdisk; run store-ramdisk"); ++ ++ setenv("get-kernel", "tftp ${kernel} ${linux}; setenv kernel-size ${filesize}"); ++ setenv("store-kernel", "cp.b ${kernel} ${OS} ${kernel-size}; saveenv"); ++ setenv("load-kernel", "cp.b ${OS} ${kernel} ${kernel-size}; saveenv"); ++ setenv("flash-kernel", "run get-kernel; run store-kernel"); ++ ++ setenv("get", "run get-kernel ; run get-ramdisk"); ++ setenv("flash", "run flash-kernel ; run flash-ramdisk ; saveenv"); ++ setenv("load", "run load-kernel ; run load-ramdisk"); ++ ++ setenv("bootcmd", "run load ; bootm "MK_STR(KERNEL_START)); ++ ++ setenv("fstype", "ram"); ++ setenv("flashfs", "/dev/mtdblock2"); ++ setenv("ramfs", "/dev/ram"); ++ ++ setenv("rootfstype", "jffs2"); ++ setenv("access", "rw"); ++ setenv("ramdisk_size", "15360"); ++ setenv("console", "ttyS0,115200"); ++ ++ ++#if defined(MEMORY_SIZE) ++ setenv("mem", MK_STR(MEMORY_SIZE)); ++#else ++ setenv("mem", "32M"); /* Cautious default */ ++#endif ++ ++ setenv("update", "os; fs; setargs"); ++ setenv("cmpk", "run flash-kernel; cp.b ${OS} ${ramdisk} ${kernel-size}; cmp ${kernel} ${ramdisk} ${kernel-size}"); ++#endif /* CONFIG_LOAD_SCRIPTS */ ++#if defined(CONFIG_AT91RM9200) ++ setenv("machid24", "0x0fb"); ++ setenv("machid26", "0x2c1"); ++ setenv("machid", "0x2c1"); ++ setenv("k24", "setenv machid ${machid24}; os"); ++ setenv("k26", "setenv machid ${machid26}; os"); ++#endif ++ AT91F_DataflashSetEnv (); ++#if defined(CONFIG_LOAD_SCRIPTS) ++ setargs(); ++#endif ++ return (saveenv() ? 1 : 0); ++} ++ ++ ++ ++U_BOOT_CMD( ++ factory, 1, 1, do_factory_defaults, ++ "factory\t- Create a default environment\n", ++ "\n" ++); ++ ++#if defined(CONFIG_LOAD_SCRIPTS) ++void setargs(void) ++{ ++ char cmd[512]; ++ char fstype[512]; ++ ++ sprintf(fstype,getenv("fstype")); ++ if((fstype[0] != 'f') && (fstype[0] != 'r')) { ++ fstype[0] = 'r'; ++ } ++ ++ if(fstype[0] == 'f') { ++ sprintf(cmd,"root=%s rootfstype=%s ip=%s:%s:%s:%s console=%s,mem=%s", ++ getenv("flashfs"), ++ getenv("rootfstype"), ++ getenv("ipaddr"), ++ getenv("serverip"), ++ getenv("gatewayip"), ++ getenv("netmask"), ++ getenv("console"), ++ getenv("mem") ++ ); ++ cmd[511] = '\0'; ++ printf("len=%d: %s\n",strlen(cmd),cmd); ++ if(strlen(cmd) > 500) { ++ printf("Error: Environment too large during 'setargs'\n"); ++ } else { ++ setenv("bootargs",cmd); ++ setenv("bootcmd", "run load-kernel ; bootm 21000000"); ++ } ++ } else if(fstype[0] == 'r') { ++ sprintf(cmd,"root=%s %s initrd=%s ramdisk_size=%s ip=%s:%s:%s:%s console=%s,mem=%s", ++ getenv("ramfs"), ++ getenv("access"), ++ getenv("initrd"), ++ getenv("ramdisk_size"), ++ getenv("ipaddr"), ++ getenv("serverip"), ++ getenv("gatewayip"), ++ getenv("netmask"), ++ getenv("console"), ++ getenv("mem") ++ ); ++ printf("len=%d: %s\n",strlen(cmd),cmd); ++ cmd[511] = '\0'; ++ if(strlen(cmd) > 500) { ++ printf("Error: Environment too large during 'setargs'\n"); ++ } else { ++ setenv("bootargs",cmd); ++ setenv("bootcmd", "run load ; bootm 21000000"); ++ } ++ } else { ++ setenv("bootargs","no args"); ++ } ++} ++ ++int do_setargs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ setargs(); ++ return 0; ++} ++ ++U_BOOT_CMD( ++ setargs, 1, 1, do_setargs, ++ "setargs\t- Create a bootargs from:" ++ "fstype=flash: (${flash} ${access} ${initrd} ${ramdisk_size}) " ++ "fstype=ram: (${ram} ${access} ${initrd} ${ramdisk_size}) " ++ "${ipaddr} ${serverip} ${gatewayip} ${netmask} " ++ "${console} ${mem}\n" ++ , "\n" ++); ++ ++int do_os (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ char *kchip; ++ char *kdate; ++ char *kver; ++ char cmd[512]; ++ kchip = getenv("hostname"); ++ kdate = getenv("kernel-date"); ++ kver = getenv("kernel-version"); ++ if((strlen(kdate) + strlen(kver) + 32) > 500) { ++ printf("Error: Environment too large during 'os': "); ++ printf("len=%d\n", strlen(kdate) + strlen(kver) + 32); ++ } else if(kver != NULL) { ++ if(kdate != NULL) { ++ sprintf(cmd,"%s-linux-%s-%s.gz",kchip,kver,kdate); ++ } else { ++ sprintf(cmd,"%s-linux-%s.gz",kchip,kver); ++ } ++ printf("Setting kernel to %s\n",cmd); ++ setenv("linux",cmd); ++ return 0; ++ } ++ return 1; ++} ++ ++U_BOOT_CMD( ++ os, 1, 1, do_os, ++ "os\t- Select linux version ${hostname}-linux-${kernel-name}-${kernel-date}\n" ++ , "\n" ++); ++ ++ ++int do_fs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ char *ver; ++ char *fsdate; ++ char *hostname; ++ char cmd[512]; ++ fsdate = getenv("fs-date"); ++ hostname = getenv("hostname"); ++ ++ if(fsdate != NULL) { ++ sprintf(cmd,"rootfs.arm-%s.ext2",fsdate); ++ setenv("rd-1",cmd); ++ sprintf(cmd,"rootfs.arm-%s.jffs2",fsdate); ++ setenv("rd-2",cmd); ++ } ++ ver = getenv("ver"); /* Find out which version we are using*/ ++ if(cmd==NULL) { ++ setenv("ver","1"); ++ } ++ ver = getenv("ver"); /* Find out which version we are using*/ ++ sprintf(cmd,"rd-%s",ver); /* create rd${ver}*/ ++ ver=getenv(cmd); ++ sprintf(cmd,"%s",ver); ++ printf("Setting ramdisk to %s\n",cmd); ++ setenv("rd",cmd); ++ return 0; ++} ++ ++ ++U_BOOT_CMD( ++ fs, 1, 1, do_fs, ++ "fs\t- Select ramdisk version == rd-${ver}\n" ++ , "\n" ++); ++#endif /* #if defined(CONFIG_LOAD_SCRIPTS) */ ++ ++ +diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile +--- u-boot-2009.01-0rig//common/Makefile 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/common/Makefile 2009-01-02 19:17:16.000000000 +0100 +@@ -84,6 +84,7 @@ + COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o + COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o + COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o ++COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o + COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o + COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o + COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-010-coloured_led.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-010-coloured_led.patch new file mode 100644 index 000000000..5c1d29dce --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-010-coloured_led.patch @@ -0,0 +1,196 @@ +diff -urN u-boot-2009.01-0rig//common/cmd_led.c u-boot-2009.01/common/cmd_led.c +--- u-boot-2009.01-0rig//common/cmd_led.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/common/cmd_led.c 2009-01-03 23:39:57.000000000 +0100 +@@ -0,0 +1,84 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf.samuelsson@atmel.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * This file provides a shell like 'test' function to return ++ * true/false from an integer or string compare of two memory ++ * locations or a location and a scalar/literal. ++ * A few parts were lifted from bash 'test' command ++ */ ++ ++#include <common.h> ++#include <config.h> ++#include <command.h> ++#include <coloured_led.h> ++ ++int do_led ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) ++{ ++ int led; ++ /* Validate arguments */ ++ if ((argc != 3)){ ++ printf("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ if (strcmp(argv[1], "1") == 0) { ++ led = (1 << 0); ++ } else if (strcmp(argv[1], "2") == 0) { ++ led = (1 << 1); ++ } else if (strcmp(argv[1], "3") == 0) { ++ led = (1 << 2); ++ } else if (strcmp(argv[1], "green") == 0) { ++ led = (1 << 0); ++ } else if (strcmp(argv[1], "yellow") == 0) { ++ led = (1 << 1); ++ } else if (strcmp(argv[1], "red") == 0) { ++ led = (1 << 2); ++ } else if (strcmp(argv[1], "all") == 0) { ++ led = 7; ++ } else { ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ ++ if (strcmp(argv[2], "off") == 0) { ++ if(led & 1) green_LED_off(); ++ if(led & 2) yellow_LED_off(); ++ if(led & 4) red_LED_off(); ++ } else if (strcmp(argv[2], "on") == 0) { ++ if(led & 1) green_LED_on(); ++ if(led & 2) yellow_LED_on(); ++ if(led & 4) red_LED_on(); ++ } else { ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++U_BOOT_CMD( ++ led, 3, 1, do_led, ++ "led\t- [1|2|3|green|yellow|red|all] [on|off]\n", ++ "led [1|2|3|green|yellow|red|all] [on|off] sets /clears led 1,2,3\n" ++); ++ +diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile +--- u-boot-2009.01-0rig//common/Makefile 2009-01-02 21:18:24.000000000 +0100 ++++ u-boot-2009.01/common/Makefile 2009-01-03 23:41:53.000000000 +0100 +@@ -99,6 +99,7 @@ + COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o + COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o + COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o ++COBJS-$(CONFIG_CMD_LED) += cmd_led.o + COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o + COBJS-y += cmd_load.o + COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o +diff -urN u-boot-2009.01-0rig//include/coloured_led.h u-boot-2009.01/include/coloured_led.h +--- u-boot-2009.01-0rig//include/coloured_led.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/coloured_led.h 2009-01-03 23:39:19.000000000 +0100 +@@ -0,0 +1,62 @@ ++/* ++ * (C) Copyright 2008 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * The purpose of this code is to signal the operational status of a ++ * target which usually boots over the network; while running in ++ * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply ++ * message has been received, the LED is turned off. The Linux ++ * kernel, once it is running, will start blinking the LED again, ++ * with another frequency. ++ */ ++ ++#ifndef _COLOURED_LED_H_ ++#define _COLOURED_LED_H_ ++ ++#ifdef CONFIG_COLOURED_LED ++ ++/* ++ * Coloured LEDs API ++ */ ++#ifndef __ASSEMBLY__ ++extern void coloured_LED_init (void); ++extern void red_LED_on(void); ++extern void red_LED_off(void); ++extern void green_LED_on(void); ++extern void green_LED_off(void); ++extern void yellow_LED_on(void); ++extern void yellow_LED_off(void); ++#else ++ .extern LED_init ++ .extern red_LED_on ++ .extern red_LED_off ++ .extern yellow_LED_on ++ .extern yellow_LED_off ++ .extern green_LED_on ++ .extern green_LED_off ++#endif ++ ++#endif /* CONFIG_COLOURED_LED */ ++ ++#endif /* _STATUS_COLOURED_H_ */ ++ +diff -urN u-boot-2009.01-0rig//include/status_led.h u-boot-2009.01/include/status_led.h +--- u-boot-2009.01-0rig//include/status_led.h 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/include/status_led.h 2009-01-03 23:44:40.000000000 +0100 +@@ -383,27 +383,6 @@ + # include <asm/status_led.h> + #endif + +-/* +- * Coloured LEDs API +- */ +-#ifndef __ASSEMBLY__ +-extern void coloured_LED_init (void); +-extern void red_LED_on(void); +-extern void red_LED_off(void); +-extern void green_LED_on(void); +-extern void green_LED_off(void); +-extern void yellow_LED_on(void); +-extern void yellow_LED_off(void); +-#else +- .extern LED_init +- .extern red_LED_on +- .extern red_LED_off +- .extern yellow_LED_on +- .extern yellow_LED_off +- .extern green_LED_on +- .extern green_LED_off +-#endif +- + #endif /* CONFIG_STATUS_LED */ + + #endif /* _STATUS_LED_H_ */ diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-011-spimux.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-011-spimux.patch new file mode 100644 index 000000000..8ab469fd8 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-011-spimux.patch @@ -0,0 +1,93 @@ +diff -urN u-boot-2009.01-0rig//common/cmd_mux.c u-boot-2009.01/common/cmd_mux.c +--- u-boot-2009.01-0rig//common/cmd_mux.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/common/cmd_mux.c 2009-01-04 00:17:19.000000000 +0100 +@@ -0,0 +1,78 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf.samuelsson@atmel.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <command.h> ++#if (defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)) ++ ++#include <asm/arch/AT91RM9200.h> ++#include <dataflash.h> ++#include <at45.h> ++ ++ ++static int mmc_nspi (const char *s) ++{ ++ if (strcmp(s, "mmc") == 0) { ++ return (1); ++ } else if (strcmp(s, "spi") == 0) { ++ return (0); ++ } ++ return (-1); ++} ++ ++int do_mux ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ switch (argc) { ++ case 2: /* on / off */ ++ switch (mmc_nspi(argv[1])) { ++#if 0 /* prevented by varargs handling; FALLTROUGH is harmless, too */ ++ default: printf ("Usage:\n%s\n", cmdtp->usage); ++ return; ++#endif ++ case 0: AT91F_SelectSPI (); ++ break; ++ case 1: AT91F_SelectMMC (); ++ break; ++ } ++ /* FALL TROUGH */ ++ case 1: /* get status */ ++ printf ("Mux is configured to be %s\n", ++ AT91F_GetMuxStatus() ? "MMC" : "SPI"); ++ return 0; ++ default: ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ return 0; ++} ++ ++ ++U_BOOT_CMD( ++ mux, 2, 1, do_mux, ++ "mux\t- enable or disable MMC or SPI\n", ++ "[mmc, spi]\n" ++ " - enable or disable MMC or SPI\n" ++); ++ ++#endif /* CONFIG_CMD_MUX */ ++ +diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile +--- u-boot-2009.01-0rig//common/Makefile 2009-01-04 00:10:28.000000000 +0100 ++++ u-boot-2009.01/common/Makefile 2009-01-04 00:20:39.000000000 +0100 +@@ -112,6 +112,7 @@ + COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o + COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o + COBJS-$(CONFIG_MP) += cmd_mp.o ++COBJS-$(CONFIG_CMD_AT91_SPIMUX) += cmd_mux.o + COBJS-y += cmd_nand.o + COBJS-$(CONFIG_CMD_NET) += cmd_net.o + COBJS-$(CONFIG_CMD_ONENAND) += cmd_onenand.o diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch new file mode 100644 index 000000000..c2f709c70 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch @@ -0,0 +1,77 @@ +diff -urN u-boot-2009.01-0rig//common/cmd_ethinit.c u-boot-2009.01/common/cmd_ethinit.c +--- u-boot-2009.01-0rig//common/cmd_ethinit.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/common/cmd_ethinit.c 2009-01-04 00:28:39.000000000 +0100 +@@ -0,0 +1,62 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * Boot support ++ */ ++#include <common.h> ++#include <command.h> ++#include <net.h> ++#ifdef CONFIG_CMD_ETHINIT ++extern int eth_init (bd_t * bd); ++ ++static void delay(void) ++{ ++} ++/* ++ * This command allows you to delay booting until you have a ++ * valid Ethernet connection. ++ * Neccessary if you want to NFS mount a rootfs etc. ++ * When both this target and the NFS server ++ * are powered on at the same time, then the NFS ++ * server can take a long time to boot. ++ */ ++int do_ethinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int i; ++ DECLARE_GLOBAL_DATA_PTR; ++ while(eth_init (gd->bd) == 0) { ++ for(i = 0; i < 10000000; i ++) { ++ delay(); ++ } ++ } ++ return 0; ++} ++ ++U_BOOT_CMD( ++ ethinit, 1, 1, do_ethinit, ++ "ethinit\t- Initialize Ethernet controller\n", ++ "\n" ++); ++ ++#endif /* CONFIG_CMD_ETHINIT */ +diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile +--- u-boot-2009.01-0rig//common/Makefile 2009-01-04 00:22:06.000000000 +0100 ++++ u-boot-2009.01/common/Makefile 2009-01-04 00:29:46.000000000 +0100 +@@ -83,6 +83,7 @@ + COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o + COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o + COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o ++COBJS-$(CONFIG_CMD_ETHINIT) += cmd_ethinit.o + COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o + COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o + COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch new file mode 100644 index 000000000..e65645b69 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch @@ -0,0 +1,130 @@ +diff -urN u-boot-2009.01-0rig//include/configs/at91cap9adk.h u-boot-2009.01/include/configs/at91cap9adk.h +--- u-boot-2009.01-0rig//include/configs/at91cap9adk.h 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91cap9adk.h 2009-01-04 00:43:58.000000000 +0100 +@@ -69,7 +69,9 @@ + #define CONFIG_ATMEL_LCD 1 + #define CONFIG_ATMEL_LCD_BGR555 1 + #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +- ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + #define CONFIG_BOOTDELAY 3 + + /* +diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h +--- u-boot-2009.01-0rig//include/configs/at91rm9200df.h 2009-01-02 17:37:43.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200df.h 2009-01-04 00:43:33.000000000 +0100 +@@ -123,6 +123,9 @@ + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII + #define CONFIG_CMD_NAND ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + #define CONFIG_CMD_AT91_SPIMUX + #define CONFIG_CMD_ETHINIT + +diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h +--- u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h 2009-01-02 10:03:11.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-04 00:42:52.000000000 +0100 +@@ -122,7 +122,11 @@ + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII + #define CONFIG_CMD_NAND ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + #define CONFIG_CMD_AT91_SPIMUX ++#define CONFIG_CMD_ETHINIT + + #define CONFIG_NAND_LEGACY + +diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h +--- u-boot-2009.01-0rig//include/configs/at91rm9200dk.h 2009-01-02 10:03:11.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-04 00:43:15.000000000 +0100 +@@ -120,7 +120,11 @@ + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII + #define CONFIG_CMD_NAND ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + #define CONFIG_CMD_AT91_SPIMUX ++#define CONFIG_CMD_ETHINIT + + #define CONFIG_NAND_LEGACY + +diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h +--- u-boot-2009.01-0rig//include/configs/at91rm9200ek.h 2009-01-02 17:37:43.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200ek.h 2009-01-04 00:42:35.000000000 +0100 +@@ -121,9 +121,11 @@ + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII + #define CONFIG_CMD_NAND ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + #define CONFIG_CMD_AT91_SPIMUX + #define CONFIG_CMD_ETHINIT +- + #define CONFIG_NAND_LEGACY + + #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +diff -urN u-boot-2009.01-0rig//include/configs/at91sam9260ek.h u-boot-2009.01/include/configs/at91sam9260ek.h +--- u-boot-2009.01-0rig//include/configs/at91sam9260ek.h 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91sam9260ek.h 2009-01-04 00:41:56.000000000 +0100 +@@ -74,10 +74,13 @@ + #include <config_cmd_default.h> + #undef CONFIG_CMD_BDI + #undef CONFIG_CMD_IMI +-#undef CONFIG_CMD_AUTOSCRIPT ++#define CONFIG_CMD_AUTOSCRIPT + #undef CONFIG_CMD_FPGA + #undef CONFIG_CMD_LOADS + #undef CONFIG_CMD_IMLS ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + + #define CONFIG_CMD_PING 1 + #define CONFIG_CMD_DHCP 1 +diff -urN u-boot-2009.01-0rig//include/configs/at91sam9261ek.h u-boot-2009.01/include/configs/at91sam9261ek.h +--- u-boot-2009.01-0rig//include/configs/at91sam9261ek.h 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91sam9261ek.h 2009-01-04 00:44:11.000000000 +0100 +@@ -68,6 +68,9 @@ + #define CONFIG_ATMEL_LCD 1 + #define CONFIG_ATMEL_LCD_BGR555 1 + #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + + #define CONFIG_BOOTDELAY 3 + +diff -urN u-boot-2009.01-0rig//include/configs/at91sam9263ek.h u-boot-2009.01/include/configs/at91sam9263ek.h +--- u-boot-2009.01-0rig//include/configs/at91sam9263ek.h 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91sam9263ek.h 2009-01-04 00:44:34.000000000 +0100 +@@ -69,6 +69,9 @@ + #define CONFIG_ATMEL_LCD 1 + #define CONFIG_ATMEL_LCD_BGR555 1 + #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + + #define CONFIG_BOOTDELAY 3 + +diff -urN u-boot-2009.01-0rig//include/configs/at91sam9rlek.h u-boot-2009.01/include/configs/at91sam9rlek.h +--- u-boot-2009.01-0rig//include/configs/at91sam9rlek.h 2008-12-16 23:48:27.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91sam9rlek.h 2009-01-04 00:44:54.000000000 +0100 +@@ -68,6 +68,9 @@ + #define CONFIG_ATMEL_LCD 1 + #define CONFIG_ATMEL_LCD_RGB565 1 + #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_CMD_FACTORY ++#define CONFIG_CMD_LED ++#define CONFIG_COLOURED_LED + + #define CONFIG_BOOTDELAY 3 + |