summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch')
-rw-r--r--target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch324
1 files changed, 0 insertions, 324 deletions
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch
deleted file mode 100644
index 8f14170fa..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch
+++ /dev/null
@@ -1,324 +0,0 @@
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 13:09:31.000000000 +0100
-+++ u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 16:11:36.000000000 +0100
-@@ -3,6 +3,9 @@
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
-@@ -24,6 +27,10 @@
-
- #include <common.h>
- #include <asm/arch/AT91RM9200.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_pio.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
- #include <at91rm9200_net.h>
- #include <dm9161.h>
-
-@@ -41,13 +48,13 @@
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
-- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-+ at91_set_gpio_output(AT91_PIN_PA23, 1);
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of AT91RM9200DK-Board */
-- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
-+ gd->bd->bi_arch_number = AT91RM9200_BOARD;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-@@ -91,46 +98,58 @@
- */
- #if defined(CONFIG_CMD_NAND)
- extern ulong nand_probe (ulong physadr);
-+/* set the bus interface characteristics based on
-+ * tDS Data Set up Time 30 - ns
-+ * tDH Data Hold Time 20 - ns
-+ * tALS ALE Set up Time 20 - ns
-+ * 16ns at 60 MHz ~= 3
-+ */
-
--#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
--void nand_init (void)
--{
-- /* Setup Smart Media, fitst enable the address range of CS3 */
-- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
-- /* set the bus interface characteristics based on
-- tDS Data Set up Time 30 - ns
-- tDH Data Hold Time 20 - ns
-- tALS ALE Set up Time 20 - ns
-- 16ns at 60 MHz ~= 3 */
- /*memory mapping structures */
- #define SM_ID_RWH (5 << 28)
- #define SM_RWH (1 << 28)
- #define SM_RWS (0 << 24)
- #define SM_TDF (1 << 8)
- #define SM_NWS (3)
-- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
-- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
-- SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-+
-+#define SMARTMEDIA_INIT ( \
-+ SM_RWH | \
-+ SM_RWS | \
-+ AT91C_SMC2_ACSS_STANDARD | \
-+ AT91C_SMC2_DBW_8 | \
-+ SM_TDF | \
-+ AT91C_SMC2_WSEN | \
-+ SM_NWS \
-+ )
-+
-+
-+
-+#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
-+void nand_init (void)
-+{
-+ /* Setup Smart Media, fitst enable the address range of CS3 */
-+ /* *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; */
-+ at91_sys_setbit(AT91C_EBI_CS3A_SMC_SmartMedia, AT91_EBI_CSA);
-+
-+ /* Init Smartmedia Interface */
-+ at91_sys_write(AT91_SMC2_CSR3, SMARTMEDIA_INIT);
-
- /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
-- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
-- AT91C_PC3_BFBAA_SMWE;
-- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
-- AT91C_PC3_BFBAA_SMWE;
-+ at91_set_A_periph(AT91_PIN_PC0, 0); /* BFCK */
-+ at91_set_A_periph(AT91_PIN_PC1, 0); /* BFRDY/SMOE */
-+ at91_set_A_periph(AT91_PIN_PC3, 0); /* BFBAA/SMWE */
-
- /* Configure PC2 as input (signal READY of the SmartMedia) */
-- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
-- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
-+ at91_set_gpio_input(AT91_PIN_PC2, 0);
-
- /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
-- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
-- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
-+ at91_set_gpio_input(AT91_PIN_PB1, 0);
-
- /* PIOB and PIOC clock enabling */
-- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOC);
-
-- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-+ if (at91_get_gpio_value(AT91_PIN_PB1))
- printf (" No SmartMedia card inserted\n");
- #ifdef DEBUG
- printf (" SmartMedia card inserted\n");
-@@ -140,3 +159,4 @@
- printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
- }
- #endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c u-boot-2009.01/board/atmel/at91rm9200dk/led.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c 2009-01-01 13:09:31.000000000 +0100
-+++ u-boot-2009.01/board/atmel/at91rm9200dk/led.c 2009-01-01 15:53:56.000000000 +0100
-@@ -24,57 +24,105 @@
-
- #include <common.h>
- #include <asm/arch/AT91RM9200.h>
-+/*#include <asm/arch/at91_pmc.h>*/
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-
--#define GREEN_LED AT91C_PIO_PB0
--#define YELLOW_LED AT91C_PIO_PB1
--#define RED_LED AT91C_PIO_PB2
-+#define GREEN_LED AT91_PIN_PB0
-+#define YELLOW_LED AT91_PIN_PB1
-+#define RED_LED AT91_PIN_PB2
-
--void green_LED_on(void)
-+
-+#define GREEN_LED_ON 0
-+#define GREEN_LED_OFF 1
-+#define YELLOW_LED_ON 0
-+#define YELLOW_LED_OFF 1
-+#define RED_LED_ON 0
-+#define RED_LED_OFF 1
-+
-+#define TIME_SLICE 500000
-+
-+void yellow_LED_on(void)
-+{
-+ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_ON);
-+}
-+
-+void yellow_LED_off(void)
-+{
-+ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
-+}
-+
-+void red_LED_on(void)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- PIOB->PIO_CODR = GREEN_LED;
-+ at91_set_gpio_value(RED_LED, RED_LED_ON);
- }
-
--void yellow_LED_on(void)
-+void red_LED_off(void)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- PIOB->PIO_CODR = YELLOW_LED;
-+ at91_set_gpio_value(RED_LED, RED_LED_OFF);
- }
-
--void red_LED_on(void)
-+void green_LED_on(void)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- PIOB->PIO_CODR = RED_LED;
-+ at91_set_gpio_value(GREEN_LED, GREEN_LED_ON);
- }
-
--void green_LED_off(void)
-+void green_LED_off(void)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- PIOB->PIO_SODR = GREEN_LED;
-+ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
- }
-
--void yellow_LED_off(void)
-+static void delay(unsigned int time)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- PIOB->PIO_SODR = YELLOW_LED;
-+ volatile unsigned int counter = time;
-+ while(counter > 0) counter--;
- }
-
--void red_LED_off(void)
-+void green_LED_blink(unsigned int time)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- PIOB->PIO_SODR = RED_LED;
-+ while(time > 0) {
-+ green_LED_on();
-+ delay(TIME_SLICE);
-+ green_LED_off();
-+ delay(TIME_SLICE);
-+ time--;
-+ }
- }
-
-+void yellow_LED_blink(unsigned int time)
-+{
-+ while(time > 0) {
-+ yellow_LED_on();
-+ delay(TIME_SLICE);
-+ yellow_LED_off();
-+ delay(TIME_SLICE);
-+ time--;
-+ }
-+}
-
--void coloured_LED_init (void)
-+void red_LED_blink(unsigned int time)
- {
-- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
-- AT91PS_PMC PMC = AT91C_BASE_PMC;
-- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
-- /* Disable peripherals on LEDs */
-- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-- /* Enable pins as outputs */
-- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-- /* Turn all LEDs OFF */
-- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-+ while(time > 0) {
-+ red_LED_on();
-+ delay(TIME_SLICE);
-+ red_LED_off();
-+ delay(TIME_SLICE);
-+ time--;
-+ }
- }
-+
-+void coloured_LED_init(void)
-+{
-+ /* Enable clock */
-+ at91_sys_write(AT91C_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
-+
-+ at91_set_gpio_output(GREEN_LED, 1);
-+ at91_set_gpio_output(YELLOW_LED, 1);
-+ at91_set_gpio_output(RED_LED, 1);
-+
-+ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
-+ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
-+ at91_set_gpio_value(RED_LED, RED_LED_ON);
-+}
-+
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c u-boot-2009.01/board/atmel/at91rm9200dk/mux.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c 2009-01-01 13:09:31.000000000 +0100
-+++ u-boot-2009.01/board/atmel/at91rm9200dk/mux.c 2009-01-01 16:38:01.000000000 +0100
-@@ -1,37 +1,29 @@
- #include <config.h>
- #include <common.h>
- #include <asm/hardware.h>
-+#include <asm/arch/at91_pio.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
- #include <dataflash.h>
-
- int AT91F_GetMuxStatus(void) {
--#ifdef DATAFLASH_MMC_SELECT
-- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
-- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
--
--
-- if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) {
-- return 1;
-- } else {
-- return 0;
-- }
--#endif
-+#ifdef CONFIG_CMD_AT91_SPIMUX
-+ return at91_get_gpio_value(DATAFLASH_MMC_SELECT);
-+#else
- return 0;
-+#endif
- }
-
--void AT91F_SelectMMC(void) {
--#ifdef DATAFLASH_MMC_SELECT
-- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
-- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
-- /* Set Output */
-- AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT;
-+void AT91F_SelectMMC(void)
-+{
-+#ifdef CONFIG_CMD_AT91_SPIMUX
-+ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 1); /* Set in PIO mode and select SD-Card*/
- #endif
- }
-
- void AT91F_SelectSPI(void) {
--#ifdef DATAFLASH_MMC_SELECT
-- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
-- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
-- /* Clear Output */
-- AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT;
-+#ifdef CONFIG_CMD_AT91_SPIMUX
-+ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 0); /* Set in PIO mode and select SPI */
- #endif
- }
-+
-
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 05:42:49 +0000