diff options
Diffstat (limited to 'target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch')
| -rw-r--r-- | target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch new file mode 100644 index 000000000..2e7e57822 --- /dev/null +++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch @@ -0,0 +1,309 @@ +diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h +--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-01 21:19:30.000000000 +0100 +@@ -0,0 +1,251 @@ ++/* ++ * Rick Bronson <rick@efn.org> ++ * ++ * Configuration settings for the AT91RM9200DK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK ++#define CONFIG_HOSTNAME at91rm9200dk ++ ++/* ARM asynchronous clock */ ++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ ++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ ++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ ++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ ++#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++#define USE_920T_MMU 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* Already done by dataflashboot */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 ++/* flash */ ++#define MC_PUIA_VAL 0x00000000 ++#define MC_PUP_VAL 0x00000000 ++#define MC_PUER_VAL 0x00000000 ++#define MC_ASR_VAL 0x00000000 ++#define MC_AASR_VAL 0x00000000 ++#define EBI_CFGR_VAL 0x00000000 ++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ ++ ++/* clocks */ ++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ ++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ ++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ ++ ++/* sdram */ ++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ ++#define PIOC_BSR_VAL 0x00000000 ++#define PIOC_PDR_VAL 0xFFFF0000 ++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ ++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ ++#define SDRAM 0x20000000 /* address of the SDRAM */ ++#define SDRAM1 0x20000080 /* address of the SDRAM */ ++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ ++#define SDRC_MR_VAL 0x00000002 /* Precharge All */ ++#define SDRC_MR_VAL1 0x00000004 /* refresh */ ++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ ++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ ++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ ++#else ++#define CONFIG_SKIP_RELOCATE_UBOOT ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++/* ++ * Size of malloc() pool ++ */ ++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* define one of these to choose the DBGU, USART0 or USART1 as console */ ++#define CONFIG_DBGU ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++ ++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ ++ ++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ ++ ++#define CONFIG_BOOTDELAY 3 ++/* #define CONFIG_ENV_OVERWRITE 1 */ ++ ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE ++#define CONFIG_BOOTP_BOOTPATH ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_HOSTNAME ++ ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_AT91_SPIMUX ++ ++#define CONFIG_NAND_LEGACY ++ ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define SECTORSIZE 512 ++ ++#define ADDR_COLUMN 1 ++#define ADDR_PAGE 2 ++#define ADDR_COLUMN_PAGE 3 ++ ++#define NAND_ChipID_UNKNOWN 0x00 ++#define NAND_MAX_FLOORS 1 ++#define NAND_MAX_CHIPS 1 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ ++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ ++ ++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ ++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) ++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) ++ ++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) ++ ++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) ++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) ++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) ++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) ++/* the following are NOP's in our implementation */ ++#define NAND_CTL_CLRALE(nandptr) ++#define NAND_CTL_SETALE(nandptr) ++#define NAND_CTL_CLRCLE(nandptr) ++#define NAND_CTL_SETCLE(nandptr) ++ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ ++ ++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM ++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 ++ ++#define CONFIG_DRIVER_ETHER ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_AT91C_USE_RMII ++ ++/* AC Characteristics */ ++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0xC << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) ++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 ++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ ++#define CONFIG__SUPPORT_BLOCK_ERASE 1 ++ ++ ++#define PHYS_FLASH_1 0x10000000 ++#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ ++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_MAX_FLASH_BANKS 1 ++#define CONFIG_SYS_MAX_FLASH_SECT 256 ++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ ++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ ++ ++#define CONFIG_ENV_IS_IN_DATAFLASH 1 ++#define CONFIG_NEW_PARTITION 1 ++ ++#ifdef CONFIG_ENV_IS_IN_DATAFLASH ++#ifdef CONFIG_NEW_PARTITION ++#define CONFIG_ENV_OFFSET 0x4200 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/ ++#else ++#define CONFIG_ENV_OFFSET 0x20000 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#endif ++#else ++#define CONFIG_ENV_IS_IN_FLASH 1 ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ ++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ ++#else ++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ ++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ ++ ++#if defined(CONFIG_AT91RM9200DK) ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 ++#else ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 ++#endif ++ ++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ ++ ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) ++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ ++#else ++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ ++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 ++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++ ++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } ++ ++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ ++ ++#define CONFIG_SYS_HZ 1000 ++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ ++ /* AT91C_TC_TIMER_DIV1_CLOCK */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h +--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h 2009-01-01 13:09:35.000000000 +0100 ++++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-01 17:06:32.000000000 +0100 +@@ -24,6 +24,8 @@ + + #ifndef __CONFIG_H + #define __CONFIG_H ++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK ++#define CONFIG_HOSTNAME at91rm9200dk + + /* ARM asynchronous clock */ + #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ +@@ -33,6 +35,7 @@ + #define AT91_SLOW_CLOCK 32768 /* slow clock */ + + #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ + #define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ + #define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ + #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +@@ -117,6 +120,7 @@ + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII + #define CONFIG_CMD_NAND ++#define CONFIG_CMD_AT91_SPIMUX + + #define CONFIG_NAND_LEGACY + +@@ -198,6 +202,11 @@ + #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + #endif /* CONFIG_ENV_IS_IN_DATAFLASH */ + ++#if defined(CONFIG_AT91RM9200DK) ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 ++#else ++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 ++#endif + + #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ + +diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01/Makefile +--- u-boot-2009.01-rc1-0rig//Makefile 2009-01-01 13:09:30.000000000 +0100 ++++ u-boot-2009.01/Makefile 2009-01-01 21:35:24.000000000 +0100 +@@ -2562,6 +2562,9 @@ + ## Atmel AT91RM9200 Systems + ######################################################################### + ++at91rm9200dk_df_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 ++ + at91rm9200dk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + + |