diff options
Diffstat (limited to 'target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch')
| -rw-r--r-- | target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch | 30343 |
1 files changed, 0 insertions, 30343 deletions
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch b/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch deleted file mode 100644 index 803cd265f..000000000 --- a/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch +++ /dev/null @@ -1,30343 +0,0 @@ -diff -urN -x CVS linux-2.6.24/MAINTAINERS linux-2.6/MAINTAINERS ---- linux-2.6.24/MAINTAINERS 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/MAINTAINERS 2008-01-16 13:15:25.000000000 +0200 -@@ -437,7 +437,7 @@ - - ARM/ATMEL AT91RM9200 ARM ARCHITECTURE - P: Andrew Victor --M: andrew@sanpeople.com -+M: linux@maxim.org.za - L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) - W: http://maxim.org.za/at91_26.html - S: Maintained -diff -urN -x CVS linux-2.6.24/arch/arm/Kconfig linux-2.6/arch/arm/Kconfig ---- linux-2.6.24/arch/arm/Kconfig 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/Kconfig 2008-02-18 22:56:04.000000000 +0200 -@@ -180,8 +180,8 @@ - bool "Atmel AT91" - select GENERIC_GPIO - help -- This enables support for systems based on the Atmel AT91RM9200 -- and AT91SAM9xxx processors. -+ This enables support for systems based on the Atmel AT91RM9200, -+ AT91SAM9 and AT91CAP9 processors. - - config ARCH_CLPS7500 - bool "Cirrus CL-PS7500FE" -@@ -657,6 +657,7 @@ - default 128 if ARCH_L7200 - default 200 if ARCH_EBSA110 || ARCH_S3C2410 - default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER -+ default AT91_TIMER_HZ if ARCH_AT91 - default 100 - - config AEABI -diff -urN -x CVS linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S ---- linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S 2007-12-31 10:43:35.000000000 +0200 -@@ -67,12 +67,36 @@ - cmp r7, r3 - beq 99f - -+ @ emQbit ECB_AT91 : 1072 -+ mov r3, #(MACH_TYPE_ECBAT91 & 0xff) -+ orr r3, r3, #(MACH_TYPE_ECBAT91 & 0xff00) -+ cmp r7, r3 -+ beq 99f -+ - @ Ajeco 1ARM : 1075 - mov r3, #(MACH_TYPE_ONEARM & 0xff) - orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) - cmp r7, r3 - beq 99f - -+ @ Promwad Chub : 1181 -+ mov r3, #(MACH_TYPE_CHUB & 0xff) -+ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00) -+ cmp r7, r3 -+ beq 99f -+ -+ @ Sweda TMS-100: 1277 -+ mov r3, #(MACH_TYPE_SWEDATMS & 0xff) -+ orr r3, r3, #(MACH_TYPE_SWEDATMS & 0xff00) -+ cmp r7, r3 -+ beq 99f -+ -+ @ eQ-3 HomeMatic: 1392 -+ mov r3, #(MACH_TYPE_HOMEMATIC & 0xff) -+ orr r3, r3, #(MACH_TYPE_HOMEMATIC & 0xff00) -+ cmp r7, r3 -+ beq 99f -+ - @ Unknown board, use the AT91RM9200DK board - @ mov r7, #MACH_TYPE_AT91RM9200 - mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig linux-2.6/arch/arm/configs/at91cap9adk_defconfig ---- linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91cap9adk_defconfig 2008-02-18 22:52:04.000000000 +0200 -@@ -0,0 +1,1143 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24-rc8 -+# Wed Jan 23 22:55:57 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+# CONFIG_SWAP is not set -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+# CONFIG_IOSCHED_DEADLINE is not set -+# CONFIG_IOSCHED_CFQ is not set -+CONFIG_DEFAULT_AS=y -+# CONFIG_DEFAULT_DEADLINE is not set -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="anticipatory" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# -+# Atmel AT91 System-on-Chip -+# -+# CONFIG_ARCH_AT91RM9200 is not set -+# CONFIG_ARCH_AT91SAM9260 is not set -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+CONFIG_ARCH_AT91CAP9=y -+# CONFIG_ARCH_AT91X40 is not set -+CONFIG_AT91_PMC_UNIT=y -+ -+# -+# AT91CAP9 Board Type -+# -+CONFIG_MACH_AT91CAP9ADK=y -+ -+# -+# AT91 Board Options -+# -+CONFIG_MTD_AT91_DATAFLASH_CARD=y -+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set -+ -+# -+# AT91 Feature Selections -+# -+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -+CONFIG_AT91_TIMER_HZ=100 -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM926T=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5TJ=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+# CONFIG_ARM_THUMB is not set -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+CONFIG_LEDS=y -+CONFIG_LEDS_TIMER=y -+CONFIG_LEDS_CPU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+# CONFIG_VFP is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+CONFIG_IP_PNP_BOOTP=y -+CONFIG_IP_PNP_RARP=y -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+CONFIG_MTD_JEDECPROBE=y -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x0 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_IMPA7 is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=y -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+# CONFIG_MTD_NAND_VERIFY_WRITE is not set -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_AT91=y -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=8192 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=y -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_MACB=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_ADS7846=y -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+# CONFIG_IPMI_HANDLER is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+CONFIG_LOGO_LINUX_VGA16=y -+# CONFIG_LOGO_LINUX_CLUT224 is not set -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_ONETOUCH is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+# CONFIG_USB_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_AT91=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_NEW_LEDS is not set -+CONFIG_RTC_LIB=y -+# CONFIG_RTC_CLASS is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+# CONFIG_EXT3_FS is not set -+# CONFIG_EXT4DEV_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+# CONFIG_MSDOS_FS is not set -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+# CONFIG_NFS_V3 is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=y -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+# CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_SLAB is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+CONFIG_DEBUG_USER=y -+# CONFIG_DEBUG_ERRORS is not set -+# CONFIG_DEBUG_LL is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig linux-2.6/arch/arm/configs/at91rm9200dk_defconfig ---- linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91rm9200dk_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -620,14 +620,14 @@ - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_STUB is not set - # CONFIG_I2C_PCA_ISA is not set -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig linux-2.6/arch/arm/configs/at91rm9200ek_defconfig ---- linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91rm9200ek_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -594,14 +594,14 @@ - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_STUB is not set - # CONFIG_I2C_PCA_ISA is not set -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig linux-2.6/arch/arm/configs/at91sam9260ek_defconfig ---- linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91sam9260ek_defconfig 2008-01-08 22:21:02.000000000 +0200 -@@ -1,43 +1,56 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.19-rc6 --# Fri Nov 17 18:42:21 2006 -+# Linux kernel version: 2.6.24-rc7 -+# Tue Jan 8 22:20:50 2008 - # - CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y - # CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set - CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set - CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y - CONFIG_TRACE_IRQFLAGS_SUPPORT=y - CONFIG_HARDIRQS_SW_RESEND=y - CONFIG_GENERIC_IRQ_PROBE=y - CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y - CONFIG_VECTORS_BASE=0xffff0000 - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set - # CONFIG_SWAP is not set - CONFIG_SYSVIPC=y --# CONFIG_IPC_NS is not set -+CONFIG_SYSVIPC_SYSCTL=y - # CONFIG_POSIX_MQUEUE is not set - # CONFIG_BSD_PROCESS_ACCT is not set - # CONFIG_TASKSTATS is not set --# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set - # CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y - # CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y - CONFIG_INITRAMFS_SOURCE="" - CONFIG_CC_OPTIMIZE_FOR_SIZE=y - CONFIG_SYSCTL=y -@@ -53,30 +66,30 @@ - CONFIG_ELF_CORE=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y - CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y - CONFIG_SHMEM=y --CONFIG_SLAB=y - CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 --# CONFIG_SLOB is not set -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - CONFIG_KMOD=y -- --# --# Block layer --# - CONFIG_BLOCK=y -+# CONFIG_LBD is not set - # CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -108,12 +121,16 @@ - # CONFIG_ARCH_NETX is not set - # CONFIG_ARCH_H720X is not set - # CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set - # CONFIG_ARCH_IOP32X is not set - # CONFIG_ARCH_IOP33X is not set --# CONFIG_ARCH_IXP4XX is not set --# CONFIG_ARCH_IXP2000 is not set - # CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set - # CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set - # CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set - # CONFIG_ARCH_RPC is not set -@@ -121,29 +138,52 @@ - # CONFIG_ARCH_S3C2410 is not set - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set - # CONFIG_ARCH_OMAP is not set - - # -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# - # Atmel AT91 System-on-Chip - # - # CONFIG_ARCH_AT91RM9200 is not set - CONFIG_ARCH_AT91SAM9260=y - # CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+# CONFIG_ARCH_AT91X40 is not set -+CONFIG_AT91_PMC_UNIT=y -+ -+# -+# AT91SAM9260 Variants -+# -+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set - - # --# AT91SAM9260 Board Type -+# AT91SAM9260 / AT91SAM9XE Board Type - # - CONFIG_MACH_AT91SAM9260EK=y -+# CONFIG_MACH_CAM60 is not set -+# CONFIG_MACH_SAM9_L9260 is not set - - # - # AT91 Board Options - # -+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set - # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set - - # - # AT91 Feature Selections - # --# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -+# CONFIG_ATMEL_TCLIB is not set -+CONFIG_AT91_TIMER_HZ=100 - - # - # Processor Type -@@ -166,19 +206,19 @@ - # CONFIG_CPU_DCACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_WRITETHROUGH is not set - # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+# CONFIG_OUTER_CACHE is not set - - # - # Bus support - # -- --# --# PCCARD (PCMCIA/CardBus) support --# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set - # CONFIG_PCCARD is not set - - # - # Kernel Features - # -+# CONFIG_TICK_ONESHOT is not set - # CONFIG_PREEMPT is not set - # CONFIG_NO_IDLE_HZ is not set - CONFIG_HZ=100 -@@ -191,8 +231,12 @@ - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4096 - # CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -203,6 +247,7 @@ - CONFIG_ZBOOT_ROM_BSS=0x0 - CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" - # CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set - - # - # Floating point emulation -@@ -228,7 +273,7 @@ - # Power management options - # - # CONFIG_PM is not set --# CONFIG_APM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y - - # - # Networking -@@ -238,13 +283,9 @@ - # - # Networking options - # --# CONFIG_NETDEBUG is not set - CONFIG_PACKET=y - # CONFIG_PACKET_MMAP is not set - CONFIG_UNIX=y --CONFIG_XFRM=y --# CONFIG_XFRM_USER is not set --# CONFIG_XFRM_SUB_POLICY is not set - # CONFIG_NET_KEY is not set - CONFIG_INET=y - # CONFIG_IP_MULTICAST is not set -@@ -263,33 +304,23 @@ - # CONFIG_INET_IPCOMP is not set - # CONFIG_INET_XFRM_TUNNEL is not set - # CONFIG_INET_TUNNEL is not set --CONFIG_INET_XFRM_MODE_TRANSPORT=y --CONFIG_INET_XFRM_MODE_TUNNEL=y --CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set - CONFIG_INET_DIAG=y - CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set - CONFIG_TCP_CONG_CUBIC=y - CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set - # CONFIG_IPV6 is not set - # CONFIG_INET6_XFRM_TUNNEL is not set - # CONFIG_INET6_TUNNEL is not set - # CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set -- --# --# DCCP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_DCCP is not set -- --# --# SCTP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_SCTP is not set -- --# --# TIPC Configuration (EXPERIMENTAL) --# - # CONFIG_TIPC is not set - # CONFIG_ATM is not set - # CONFIG_BRIDGE is not set -@@ -302,10 +333,6 @@ - # CONFIG_LAPB is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - - # -@@ -315,7 +342,17 @@ - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -324,34 +361,17 @@ - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - CONFIG_PREVENT_FIRMWARE_BUILD=y - # CONFIG_FW_LOADER is not set - # CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# - # CONFIG_CONNECTOR is not set -- --# --# Memory Technology Devices (MTD) --# - # CONFIG_MTD is not set -- --# --# Parallel port support --# - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - # CONFIG_BLK_DEV_LOOP is not set - # CONFIG_BLK_DEV_NBD is not set -@@ -360,15 +380,19 @@ - CONFIG_BLK_DEV_RAM_COUNT=16 - CONFIG_BLK_DEV_RAM_SIZE=8192 - CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 --CONFIG_BLK_DEV_INITRD=y - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=y - - # - # SCSI device support - # - # CONFIG_RAID_ATTRS is not set - CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set - # CONFIG_SCSI_NETLINK is not set - CONFIG_SCSI_PROC_FS=y - -@@ -388,6 +412,8 @@ - CONFIG_SCSI_MULTI_LUN=y - # CONFIG_SCSI_CONSTANTS is not set - # CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m - - # - # SCSI Transports -@@ -395,43 +421,72 @@ - # CONFIG_SCSI_SPI_ATTRS is not set - # CONFIG_SCSI_FC_ATTRS is not set - # CONFIG_SCSI_ISCSI_ATTRS is not set --# CONFIG_SCSI_SAS_ATTRS is not set - # CONFIG_SCSI_SAS_LIBSAS is not set -- --# --# SCSI low-level drivers --# -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y - # CONFIG_ISCSI_TCP is not set - # CONFIG_SCSI_DEBUG is not set -- --# --# Multi-device support (RAID and LVM) --# -+# CONFIG_ATA is not set - # CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_MACB=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+CONFIG_NETDEV_1000=y -+CONFIG_NETDEV_10000=y - - # --# Fusion MPT device support --# --# CONFIG_FUSION is not set -- --# --# IEEE 1394 (FireWire) support --# -- --# --# I2O device support -+# Wireless LAN - # -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set - - # --# Network device support -+# USB Network Adapters - # --# CONFIG_NETDEVICES is not set -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set - # CONFIG_NETPOLL is not set - # CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set - - # -@@ -439,6 +494,7 @@ - # - CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set - - # - # Userland interfaces -@@ -448,7 +504,6 @@ - CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 - CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 - # CONFIG_INPUT_JOYDEV is not set --# CONFIG_INPUT_TSDEV is not set - # CONFIG_INPUT_EVDEV is not set - # CONFIG_INPUT_EVBUG is not set - -@@ -458,6 +513,7 @@ - # CONFIG_INPUT_KEYBOARD is not set - # CONFIG_INPUT_MOUSE is not set - # CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set - # CONFIG_INPUT_TOUCHSCREEN is not set - # CONFIG_INPUT_MISC is not set - -@@ -492,114 +548,131 @@ - CONFIG_UNIX98_PTYS=y - CONFIG_LEGACY_PTYS=y - CONFIG_LEGACY_PTY_COUNT=256 -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set -- --# --# Watchdog Cards --# --CONFIG_WATCHDOG=y --CONFIG_WATCHDOG_NOWAYOUT=y -- --# --# Watchdog Device Drivers --# --# CONFIG_SOFT_WATCHDOG is not set -- --# --# USB-based Watchdog Cards --# --# CONFIG_USBPCWATCHDOG is not set --CONFIG_HW_RANDOM=y -+# CONFIG_HW_RANDOM is not set - # CONFIG_NVRAM is not set --# CONFIG_DTLK is not set - # CONFIG_R3964 is not set -- --# --# Ftape, the floppy tape device driver --# - # CONFIG_RAW_DRIVER is not set -- --# --# TPM devices --# - # CONFIG_TCG_TPM is not set -- --# --# I2C support --# --# CONFIG_I2C is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=y -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_GPIO=y -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+# CONFIG_I2C_PCA is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set - - # - # SPI support - # - # CONFIG_SPI is not set - # CONFIG_SPI_MASTER is not set -- --# --# Dallas's 1-wire bus --# - # CONFIG_W1 is not set -- --# --# Hardware Monitoring support --# -+# CONFIG_POWER_SUPPLY is not set - # CONFIG_HWMON is not set --# CONFIG_HWMON_VID is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y - - # --# Misc devices -+# Watchdog Device Drivers - # --# CONFIG_TIFM_CORE is not set -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT91SAM9_WATCHDOG=y - - # --# LED devices -+# USB-based Watchdog Cards - # --# CONFIG_NEW_LEDS is not set -+# CONFIG_USBPCWATCHDOG is not set - - # --# LED drivers -+# Sonics Silicon Backplane - # -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # --# LED Triggers -+# Multifunction device drivers - # -+# CONFIG_MFD_SM501 is not set - - # - # Multimedia devices - # - # CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set - - # --# Digital Video Broadcasting Devices -+# Graphics support - # --# CONFIG_DVB is not set --# CONFIG_USB_DABUSB is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+# CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - - # --# Graphics support -+# Display device support - # --# CONFIG_FIRMWARE_EDID is not set --# CONFIG_FB is not set -+# CONFIG_DISPLAY_SUPPORT is not set - - # - # Console display driver support - # - # CONFIG_VGA_CONSOLE is not set - CONFIG_DUMMY_CONSOLE=y --# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - - # - # Sound - # - # CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set - - # --# USB support -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers - # -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+CONFIG_USB_SUPPORT=y - CONFIG_USB_ARCH_HAS_HCD=y - CONFIG_USB_ARCH_HAS_OHCI=y - # CONFIG_USB_ARCH_HAS_EHCI is not set -@@ -610,7 +683,7 @@ - # Miscellaneous USB options - # - CONFIG_USB_DEVICEFS=y --# CONFIG_USB_BANDWIDTH is not set -+CONFIG_USB_DEVICE_CLASS=y - # CONFIG_USB_DYNAMIC_MINORS is not set - # CONFIG_USB_OTG is not set - -@@ -619,9 +692,11 @@ - # - # CONFIG_USB_ISP116X_HCD is not set - CONFIG_USB_OHCI_HCD=y --# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set - CONFIG_USB_OHCI_LITTLE_ENDIAN=y - # CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set - - # - # USB Device Class drivers -@@ -640,6 +715,7 @@ - CONFIG_USB_STORAGE_DEBUG=y - # CONFIG_USB_STORAGE_DATAFAB is not set - # CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set - # CONFIG_USB_STORAGE_DPCM is not set - # CONFIG_USB_STORAGE_USBAT is not set - # CONFIG_USB_STORAGE_SDDR09 is not set -@@ -650,43 +726,10 @@ - # CONFIG_USB_LIBUSUAL is not set - - # --# USB Input Devices --# --# CONFIG_USB_HID is not set -- --# --# USB HID Boot Protocol drivers --# --# CONFIG_USB_KBD is not set --# CONFIG_USB_MOUSE is not set --# CONFIG_USB_AIPTEK is not set --# CONFIG_USB_WACOM is not set --# CONFIG_USB_ACECAD is not set --# CONFIG_USB_KBTAB is not set --# CONFIG_USB_POWERMATE is not set --# CONFIG_USB_TOUCHSCREEN is not set --# CONFIG_USB_YEALINK is not set --# CONFIG_USB_XPAD is not set --# CONFIG_USB_ATI_REMOTE is not set --# CONFIG_USB_ATI_REMOTE2 is not set --# CONFIG_USB_KEYSPAN_REMOTE is not set --# CONFIG_USB_APPLETOUCH is not set -- --# - # USB Imaging devices - # - # CONFIG_USB_MDC800 is not set - # CONFIG_USB_MICROTEK is not set -- --# --# USB Network Adapters --# --# CONFIG_USB_CATC is not set --# CONFIG_USB_KAWETH is not set --# CONFIG_USB_PEGASUS is not set --# CONFIG_USB_RTL8150 is not set --# CONFIG_USB_USBNET_MII is not set --# CONFIG_USB_USBNET is not set - CONFIG_USB_MON=y - - # -@@ -708,6 +751,7 @@ - # CONFIG_USB_RIO500 is not set - # CONFIG_USB_LEGOTOWER is not set - # CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set - # CONFIG_USB_LED is not set - # CONFIG_USB_CYPRESS_CY7C63 is not set - # CONFIG_USB_CYTHERM is not set -@@ -717,6 +761,7 @@ - # CONFIG_USB_APPLEDISPLAY is not set - # CONFIG_USB_LD is not set - # CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set - # CONFIG_USB_TEST is not set - - # -@@ -727,13 +772,19 @@ - # USB Gadget Support - # - CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set - CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set - # CONFIG_USB_GADGET_NET2280 is not set - # CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set - # CONFIG_USB_GADGET_GOKU is not set - # CONFIG_USB_GADGET_LH7A40X is not set - # CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set - CONFIG_USB_GADGET_AT91=y - CONFIG_USB_AT91=y - # CONFIG_USB_GADGET_DUMMY_HCD is not set -@@ -745,17 +796,56 @@ - # CONFIG_USB_FILE_STORAGE_TEST is not set - CONFIG_USB_G_SERIAL=m - # CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_MMC is not set -+# CONFIG_NEW_LEDS is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set - - # --# MMC/SD Card support -+# RTC interfaces - # --# CONFIG_MMC is not set -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set - - # --# Real Time Clock -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers - # --CONFIG_RTC_LIB=y --# CONFIG_RTC_CLASS is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT91SAM9=y - - # - # File systems -@@ -806,7 +896,6 @@ - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y - # CONFIG_CONFIGFS_FS is not set - - # -@@ -825,10 +914,7 @@ - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - # CONFIG_NFS_FS is not set - # CONFIG_NFSD is not set - # CONFIG_SMB_FS is not set -@@ -836,17 +922,12 @@ - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set --# CONFIG_9P_FS is not set - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# - CONFIG_NLS=y - CONFIG_NLS_DEFAULT="iso8859-1" - CONFIG_NLS_CODEPAGE_437=y -@@ -887,41 +968,49 @@ - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set - # CONFIG_NLS_UTF8 is not set -- --# --# Profiling support --# -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y - # CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y - CONFIG_ENABLE_MUST_CHECK=y - # CONFIG_MAGIC_SYSRQ is not set - # CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set - CONFIG_DEBUG_KERNEL=y --CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_DEBUG_SHIRQ is not set - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set - # CONFIG_DEBUG_SLAB is not set - # CONFIG_DEBUG_RT_MUTEXES is not set - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set - # CONFIG_DEBUG_MUTEXES is not set --# CONFIG_DEBUG_RWSEMS is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set - # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set - CONFIG_DEBUG_BUGVERBOSE=y - # CONFIG_DEBUG_INFO is not set --# CONFIG_DEBUG_FS is not set - # CONFIG_DEBUG_VM is not set - # CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y - CONFIG_FORCED_INLINING=y --# CONFIG_HEADERS_CHECK is not set -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set - CONFIG_DEBUG_USER=y - # CONFIG_DEBUG_ERRORS is not set - CONFIG_DEBUG_LL=y -@@ -932,18 +1021,21 @@ - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set - # CONFIG_CRYPTO is not set - - # - # Library routines - # -+CONFIG_BITREVERSE=y - # CONFIG_CRC_CCITT is not set - # CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set - CONFIG_CRC32=y -+# CONFIG_CRC7 is not set - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y - CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig linux-2.6/arch/arm/configs/at91sam9261ek_defconfig ---- linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91sam9261ek_defconfig 2008-01-08 22:21:57.000000000 +0200 -@@ -1,43 +1,56 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.19-rc6 --# Fri Nov 17 18:00:38 2006 -+# Linux kernel version: 2.6.24-rc7 -+# Tue Jan 8 22:21:49 2008 - # - CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y - # CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set - CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set - CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y - CONFIG_TRACE_IRQFLAGS_SUPPORT=y - CONFIG_HARDIRQS_SW_RESEND=y - CONFIG_GENERIC_IRQ_PROBE=y - CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y - CONFIG_VECTORS_BASE=0xffff0000 - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set - # CONFIG_SWAP is not set - CONFIG_SYSVIPC=y --# CONFIG_IPC_NS is not set -+CONFIG_SYSVIPC_SYSCTL=y - # CONFIG_POSIX_MQUEUE is not set - # CONFIG_BSD_PROCESS_ACCT is not set - # CONFIG_TASKSTATS is not set --# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set - # CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y - # CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y - CONFIG_INITRAMFS_SOURCE="" - CONFIG_CC_OPTIMIZE_FOR_SIZE=y - CONFIG_SYSCTL=y -@@ -53,30 +66,30 @@ - CONFIG_ELF_CORE=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y - CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y - CONFIG_SHMEM=y --CONFIG_SLAB=y - CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 --# CONFIG_SLOB is not set -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - CONFIG_KMOD=y -- --# --# Block layer --# - CONFIG_BLOCK=y -+# CONFIG_LBD is not set - # CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -108,12 +121,16 @@ - # CONFIG_ARCH_NETX is not set - # CONFIG_ARCH_H720X is not set - # CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set - # CONFIG_ARCH_IOP32X is not set - # CONFIG_ARCH_IOP33X is not set --# CONFIG_ARCH_IXP4XX is not set --# CONFIG_ARCH_IXP2000 is not set - # CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set - # CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set - # CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set - # CONFIG_ARCH_RPC is not set -@@ -121,14 +138,27 @@ - # CONFIG_ARCH_S3C2410 is not set - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set - # CONFIG_ARCH_OMAP is not set - - # -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# - # Atmel AT91 System-on-Chip - # - # CONFIG_ARCH_AT91RM9200 is not set - # CONFIG_ARCH_AT91SAM9260 is not set - CONFIG_ARCH_AT91SAM9261=y -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+# CONFIG_ARCH_AT91X40 is not set -+CONFIG_AT91_PMC_UNIT=y - - # - # AT91SAM9261 Board Type -@@ -138,12 +168,15 @@ - # - # AT91 Board Options - # -+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set - # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set - - # - # AT91 Feature Selections - # --# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -+# CONFIG_ATMEL_TCLIB is not set -+CONFIG_AT91_TIMER_HZ=100 - - # - # Processor Type -@@ -166,19 +199,19 @@ - # CONFIG_CPU_DCACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_WRITETHROUGH is not set - # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+# CONFIG_OUTER_CACHE is not set - - # - # Bus support - # -- --# --# PCCARD (PCMCIA/CardBus) support --# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set - # CONFIG_PCCARD is not set - - # - # Kernel Features - # -+# CONFIG_TICK_ONESHOT is not set - # CONFIG_PREEMPT is not set - # CONFIG_NO_IDLE_HZ is not set - CONFIG_HZ=100 -@@ -191,8 +224,12 @@ - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4096 - # CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -203,6 +240,7 @@ - CONFIG_ZBOOT_ROM_BSS=0x0 - CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" - # CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set - - # - # Floating point emulation -@@ -228,7 +266,7 @@ - # Power management options - # - # CONFIG_PM is not set --# CONFIG_APM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y - - # - # Networking -@@ -238,13 +276,13 @@ - # - # Networking options - # --# CONFIG_NETDEBUG is not set - CONFIG_PACKET=y - # CONFIG_PACKET_MMAP is not set - CONFIG_UNIX=y - CONFIG_XFRM=y - # CONFIG_XFRM_USER is not set - # CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set - # CONFIG_NET_KEY is not set - CONFIG_INET=y - # CONFIG_IP_MULTICAST is not set -@@ -266,30 +304,20 @@ - CONFIG_INET_XFRM_MODE_TRANSPORT=y - CONFIG_INET_XFRM_MODE_TUNNEL=y - CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set - CONFIG_INET_DIAG=y - CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set - CONFIG_TCP_CONG_CUBIC=y - CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set - # CONFIG_IPV6 is not set - # CONFIG_INET6_XFRM_TUNNEL is not set - # CONFIG_INET6_TUNNEL is not set - # CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set -- --# --# DCCP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_DCCP is not set -- --# --# SCTP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_SCTP is not set -- --# --# TIPC Configuration (EXPERIMENTAL) --# - # CONFIG_TIPC is not set - # CONFIG_ATM is not set - # CONFIG_BRIDGE is not set -@@ -302,10 +330,6 @@ - # CONFIG_LAPB is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - - # -@@ -315,7 +339,17 @@ - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -324,20 +358,14 @@ - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - CONFIG_PREVENT_FIRMWARE_BUILD=y - # CONFIG_FW_LOADER is not set - # CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# - # CONFIG_CONNECTOR is not set -- --# --# Memory Technology Devices (MTD) --# - CONFIG_MTD=y - # CONFIG_MTD_DEBUG is not set - # CONFIG_MTD_CONCAT is not set -@@ -350,12 +378,14 @@ - # User Modules And Translation Layers - # - # CONFIG_MTD_CHAR is not set -+CONFIG_MTD_BLKDEVS=y - CONFIG_MTD_BLOCK=y - # CONFIG_FTL is not set - # CONFIG_NFTL is not set - # CONFIG_INFTL is not set - # CONFIG_RFD_FTL is not set - # CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set - - # - # RAM/ROM/Flash chip drivers -@@ -375,7 +405,6 @@ - # CONFIG_MTD_RAM is not set - # CONFIG_MTD_ROM is not set - # CONFIG_MTD_ABSENT is not set --# CONFIG_MTD_OBSOLETE_CHIPS is not set - - # - # Mapping drivers for chip access -@@ -386,6 +415,8 @@ - # - # Self-contained MTD device drivers - # -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set - # CONFIG_MTD_SLRAM is not set - # CONFIG_MTD_PHRAM is not set - # CONFIG_MTD_MTDRAM is not set -@@ -397,35 +428,24 @@ - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOC2001PLUS is not set -- --# --# NAND Flash Device Drivers --# - CONFIG_MTD_NAND=y - # CONFIG_MTD_NAND_VERIFY_WRITE is not set - # CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set - CONFIG_MTD_NAND_IDS=y - # CONFIG_MTD_NAND_DISKONCHIP is not set - CONFIG_MTD_NAND_AT91=y - # CONFIG_MTD_NAND_NANDSIM is not set -- --# --# OneNAND Flash Device Drivers --# -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set - # CONFIG_MTD_ONENAND is not set - - # --# Parallel port support -+# UBI - Unsorted block images - # -+# CONFIG_MTD_UBI is not set - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - # CONFIG_BLK_DEV_LOOP is not set - # CONFIG_BLK_DEV_NBD is not set -@@ -434,15 +454,19 @@ - CONFIG_BLK_DEV_RAM_COUNT=16 - CONFIG_BLK_DEV_RAM_SIZE=8192 - CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 --CONFIG_BLK_DEV_INITRD=y - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=y - - # - # SCSI device support - # - # CONFIG_RAID_ATTRS is not set - CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set - # CONFIG_SCSI_NETLINK is not set - CONFIG_SCSI_PROC_FS=y - -@@ -462,6 +486,8 @@ - CONFIG_SCSI_MULTI_LUN=y - # CONFIG_SCSI_CONSTANTS is not set - # CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m - - # - # SCSI Transports -@@ -469,75 +495,49 @@ - # CONFIG_SCSI_SPI_ATTRS is not set - # CONFIG_SCSI_FC_ATTRS is not set - # CONFIG_SCSI_ISCSI_ATTRS is not set --# CONFIG_SCSI_SAS_ATTRS is not set - # CONFIG_SCSI_SAS_LIBSAS is not set -- --# --# SCSI low-level drivers --# -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y - # CONFIG_ISCSI_TCP is not set - # CONFIG_SCSI_DEBUG is not set -- --# --# Multi-device support (RAID and LVM) --# -+# CONFIG_ATA is not set - # CONFIG_MD is not set -- --# --# Fusion MPT device support --# --# CONFIG_FUSION is not set -- --# --# IEEE 1394 (FireWire) support --# -- --# --# I2O device support --# -- --# --# Network device support --# - CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set - # CONFIG_DUMMY is not set - # CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set - # CONFIG_TUN is not set -- --# --# PHY device support --# -+# CONFIG_VETH is not set - # CONFIG_PHYLIB is not set -- --# --# Ethernet (10 or 100Mbit) --# - CONFIG_NET_ETHERNET=y - CONFIG_MII=y -+# CONFIG_AX88796 is not set - # CONFIG_SMC91X is not set - CONFIG_DM9000=y -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set - - # --# Ethernet (1000 Mbit) --# -- --# --# Ethernet (10000 Mbit) --# -- --# --# Token Ring devices -+# Wireless LAN - # -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set - - # --# Wireless LAN (non-hamradio) --# --# CONFIG_NET_RADIO is not set -- --# --# Wan interfaces -+# USB Network Adapters - # -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set - # CONFIG_WAN is not set - # CONFIG_PPP is not set - # CONFIG_SLIP is not set -@@ -545,10 +545,6 @@ - # CONFIG_NETCONSOLE is not set - # CONFIG_NETPOLL is not set - # CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set - - # -@@ -556,6 +552,7 @@ - # - CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set - - # - # Userland interfaces -@@ -565,23 +562,43 @@ - CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 - CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 - # CONFIG_INPUT_JOYDEV is not set --# CONFIG_INPUT_TSDEV is not set - # CONFIG_INPUT_EVDEV is not set - # CONFIG_INPUT_EVBUG is not set - - # - # Input Device Drivers - # --# CONFIG_INPUT_KEYBOARD is not set -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=y - # CONFIG_INPUT_MOUSE is not set - # CONFIG_INPUT_JOYSTICK is not set --# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_ADS7846=y -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set - # CONFIG_INPUT_MISC is not set - - # - # Hardware I/O ports - # --# CONFIG_SERIO is not set -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+# CONFIG_SERIO_RAW is not set - # CONFIG_GAMEPORT is not set - - # -@@ -609,75 +626,47 @@ - CONFIG_UNIX98_PTYS=y - CONFIG_LEGACY_PTYS=y - CONFIG_LEGACY_PTY_COUNT=256 -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set -- --# --# Watchdog Cards --# --CONFIG_WATCHDOG=y --CONFIG_WATCHDOG_NOWAYOUT=y -- --# --# Watchdog Device Drivers --# --# CONFIG_SOFT_WATCHDOG is not set -- --# --# USB-based Watchdog Cards --# --# CONFIG_USBPCWATCHDOG is not set - CONFIG_HW_RANDOM=y - # CONFIG_NVRAM is not set --# CONFIG_DTLK is not set - # CONFIG_R3964 is not set -- --# --# Ftape, the floppy tape device driver --# - # CONFIG_RAW_DRIVER is not set -- --# --# TPM devices --# - # CONFIG_TCG_TPM is not set -- --# --# I2C support --# - CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=y - - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y - # CONFIG_I2C_OCORES is not set - # CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set - # CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set - # CONFIG_I2C_PCA is not set --# CONFIG_I2C_PCA_ISA is not set - - # - # Miscellaneous I2C Chip support - # - # CONFIG_SENSORS_DS1337 is not set - # CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set - # CONFIG_SENSORS_EEPROM is not set - # CONFIG_SENSORS_PCF8574 is not set - # CONFIG_SENSORS_PCA9539 is not set - # CONFIG_SENSORS_PCF8591 is not set - # CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set - # CONFIG_I2C_DEBUG_CORE is not set - # CONFIG_I2C_DEBUG_ALGO is not set - # CONFIG_I2C_DEBUG_BUS is not set -@@ -686,70 +675,125 @@ - # - # SPI support - # --# CONFIG_SPI is not set --# CONFIG_SPI_MASTER is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y - - # --# Dallas's 1-wire bus -+# SPI Master Controller Drivers - # --# CONFIG_W1 is not set -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set - - # --# Hardware Monitoring support -+# SPI Protocol Masters - # -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set - # CONFIG_HWMON is not set --# CONFIG_HWMON_VID is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y - - # --# Misc devices -+# Watchdog Device Drivers - # --# CONFIG_TIFM_CORE is not set -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT91SAM9_WATCHDOG=y - - # --# LED devices -+# USB-based Watchdog Cards - # --# CONFIG_NEW_LEDS is not set -+# CONFIG_USBPCWATCHDOG is not set - - # --# LED drivers -+# Sonics Silicon Backplane - # -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # --# LED Triggers -+# Multifunction device drivers - # -+# CONFIG_MFD_SM501 is not set - - # - # Multimedia devices - # - # CONFIG_VIDEO_DEV is not set -- --# --# Digital Video Broadcasting Devices --# --# CONFIG_DVB is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y - # CONFIG_USB_DABUSB is not set - - # - # Graphics support - # -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y - # CONFIG_FIRMWARE_EDID is not set --# CONFIG_FB is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D15605 is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_INTSRAM is not set -+# CONFIG_FB_ATMEL_STN is not set -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set - - # - # Console display driver support - # - # CONFIG_VGA_CONSOLE is not set - CONFIG_DUMMY_CONSOLE=y --# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+# CONFIG_FRAMEBUFFER_CONSOLE is not set -+# CONFIG_LOGO is not set - - # - # Sound - # - # CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set - - # --# USB support -+# USB Input Devices - # -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+CONFIG_USB_SUPPORT=y - CONFIG_USB_ARCH_HAS_HCD=y - CONFIG_USB_ARCH_HAS_OHCI=y - # CONFIG_USB_ARCH_HAS_EHCI is not set -@@ -760,7 +804,7 @@ - # Miscellaneous USB options - # - CONFIG_USB_DEVICEFS=y --# CONFIG_USB_BANDWIDTH is not set -+CONFIG_USB_DEVICE_CLASS=y - # CONFIG_USB_DYNAMIC_MINORS is not set - # CONFIG_USB_OTG is not set - -@@ -769,9 +813,11 @@ - # - # CONFIG_USB_ISP116X_HCD is not set - CONFIG_USB_OHCI_HCD=y --# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set - CONFIG_USB_OHCI_LITTLE_ENDIAN=y - # CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set - - # - # USB Device Class drivers -@@ -790,6 +836,7 @@ - CONFIG_USB_STORAGE_DEBUG=y - # CONFIG_USB_STORAGE_DATAFAB is not set - # CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set - # CONFIG_USB_STORAGE_DPCM is not set - # CONFIG_USB_STORAGE_USBAT is not set - # CONFIG_USB_STORAGE_SDDR09 is not set -@@ -800,43 +847,10 @@ - # CONFIG_USB_LIBUSUAL is not set - - # --# USB Input Devices --# --# CONFIG_USB_HID is not set -- --# --# USB HID Boot Protocol drivers --# --# CONFIG_USB_KBD is not set --# CONFIG_USB_MOUSE is not set --# CONFIG_USB_AIPTEK is not set --# CONFIG_USB_WACOM is not set --# CONFIG_USB_ACECAD is not set --# CONFIG_USB_KBTAB is not set --# CONFIG_USB_POWERMATE is not set --# CONFIG_USB_TOUCHSCREEN is not set --# CONFIG_USB_YEALINK is not set --# CONFIG_USB_XPAD is not set --# CONFIG_USB_ATI_REMOTE is not set --# CONFIG_USB_ATI_REMOTE2 is not set --# CONFIG_USB_KEYSPAN_REMOTE is not set --# CONFIG_USB_APPLETOUCH is not set -- --# - # USB Imaging devices - # - # CONFIG_USB_MDC800 is not set - # CONFIG_USB_MICROTEK is not set -- --# --# USB Network Adapters --# --# CONFIG_USB_CATC is not set --# CONFIG_USB_KAWETH is not set --# CONFIG_USB_PEGASUS is not set --# CONFIG_USB_RTL8150 is not set --# CONFIG_USB_USBNET_MII is not set --# CONFIG_USB_USBNET is not set - CONFIG_USB_MON=y - - # -@@ -858,6 +872,7 @@ - # CONFIG_USB_RIO500 is not set - # CONFIG_USB_LEGOTOWER is not set - # CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set - # CONFIG_USB_LED is not set - # CONFIG_USB_CYPRESS_CY7C63 is not set - # CONFIG_USB_CYTHERM is not set -@@ -867,6 +882,7 @@ - # CONFIG_USB_APPLEDISPLAY is not set - # CONFIG_USB_LD is not set - # CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set - # CONFIG_USB_TEST is not set - - # -@@ -877,13 +893,19 @@ - # USB Gadget Support - # - CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set - CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set - # CONFIG_USB_GADGET_NET2280 is not set - # CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set - # CONFIG_USB_GADGET_GOKU is not set - # CONFIG_USB_GADGET_LH7A40X is not set - # CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set - CONFIG_USB_GADGET_AT91=y - CONFIG_USB_AT91=y - # CONFIG_USB_GADGET_DUMMY_HCD is not set -@@ -895,21 +917,73 @@ - # CONFIG_USB_FILE_STORAGE_TEST is not set - CONFIG_USB_G_SERIAL=m - # CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set - - # --# MMC/SD Card support -+# MMC/SD Card Drivers - # --CONFIG_MMC=y --# CONFIG_MMC_DEBUG is not set - CONFIG_MMC_BLOCK=y --CONFIG_MMC_AT91=m --# CONFIG_MMC_TIFM_SD is not set -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set - - # --# Real Time Clock -+# MMC/SD Host Controller Drivers - # -+CONFIG_MMC_AT91=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_NEW_LEDS is not set - CONFIG_RTC_LIB=y --# CONFIG_RTC_CLASS is not set -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT91SAM9=y - - # - # File systems -@@ -960,7 +1034,6 @@ - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y - # CONFIG_CONFIGFS_FS is not set - - # -@@ -973,7 +1046,6 @@ - # CONFIG_BEFS_FS is not set - # CONFIG_BFS_FS is not set - # CONFIG_EFS_FS is not set --# CONFIG_JFFS_FS is not set - # CONFIG_JFFS2_FS is not set - CONFIG_CRAMFS=y - # CONFIG_VXFS_FS is not set -@@ -981,10 +1053,7 @@ - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - # CONFIG_NFS_FS is not set - # CONFIG_NFSD is not set - # CONFIG_SMB_FS is not set -@@ -992,17 +1061,12 @@ - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set --# CONFIG_9P_FS is not set - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# - CONFIG_NLS=y - CONFIG_NLS_DEFAULT="iso8859-1" - CONFIG_NLS_CODEPAGE_437=y -@@ -1043,41 +1107,49 @@ - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set - # CONFIG_NLS_UTF8 is not set -- --# --# Profiling support --# -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y - # CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y - CONFIG_ENABLE_MUST_CHECK=y - # CONFIG_MAGIC_SYSRQ is not set - # CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set - CONFIG_DEBUG_KERNEL=y --CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_DEBUG_SHIRQ is not set - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set - # CONFIG_DEBUG_SLAB is not set - # CONFIG_DEBUG_RT_MUTEXES is not set - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set - # CONFIG_DEBUG_MUTEXES is not set --# CONFIG_DEBUG_RWSEMS is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set - # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set - CONFIG_DEBUG_BUGVERBOSE=y - # CONFIG_DEBUG_INFO is not set --# CONFIG_DEBUG_FS is not set - # CONFIG_DEBUG_VM is not set - # CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y - CONFIG_FORCED_INLINING=y --# CONFIG_HEADERS_CHECK is not set -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set - CONFIG_DEBUG_USER=y - # CONFIG_DEBUG_ERRORS is not set - CONFIG_DEBUG_LL=y -@@ -1088,18 +1160,21 @@ - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set - # CONFIG_CRYPTO is not set - - # - # Library routines - # -+CONFIG_BITREVERSE=y - # CONFIG_CRC_CCITT is not set - # CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set - CONFIG_CRC32=y -+# CONFIG_CRC7 is not set - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y - CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig linux-2.6/arch/arm/configs/at91sam9263ek_defconfig ---- linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91sam9263ek_defconfig 2008-01-08 22:12:41.000000000 +0200 -@@ -1,12 +1,18 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.20-rc1 --# Mon Jan 8 16:06:54 2007 -+# Linux kernel version: 2.6.24-rc7 -+# Tue Jan 8 22:12:20 2008 - # - CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y - # CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set - CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set - CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y - CONFIG_TRACE_IRQFLAGS_SUPPORT=y - CONFIG_HARDIRQS_SW_RESEND=y - CONFIG_GENERIC_IRQ_PROBE=y -@@ -15,32 +21,36 @@ - # CONFIG_ARCH_HAS_ILOG2_U64 is not set - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y - CONFIG_VECTORS_BASE=0xffff0000 - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set - # CONFIG_SWAP is not set - CONFIG_SYSVIPC=y --# CONFIG_IPC_NS is not set -+CONFIG_SYSVIPC_SYSCTL=y - # CONFIG_POSIX_MQUEUE is not set - # CONFIG_BSD_PROCESS_ACCT is not set - # CONFIG_TASKSTATS is not set --# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set - # CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set - CONFIG_SYSFS_DEPRECATED=y - # CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y - CONFIG_INITRAMFS_SOURCE="" - CONFIG_CC_OPTIMIZE_FOR_SIZE=y - CONFIG_SYSCTL=y -@@ -56,32 +66,30 @@ - CONFIG_ELF_CORE=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y - CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y - CONFIG_SHMEM=y --CONFIG_SLAB=y - CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 --# CONFIG_SLOB is not set -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - CONFIG_KMOD=y -- --# --# Block layer --# - CONFIG_BLOCK=y - # CONFIG_LBD is not set - # CONFIG_BLK_DEV_IO_TRACE is not set - # CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -113,13 +121,16 @@ - # CONFIG_ARCH_NETX is not set - # CONFIG_ARCH_H720X is not set - # CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set - # CONFIG_ARCH_IOP32X is not set - # CONFIG_ARCH_IOP33X is not set --# CONFIG_ARCH_IOP13XX is not set --# CONFIG_ARCH_IXP4XX is not set --# CONFIG_ARCH_IXP2000 is not set - # CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set - # CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set - # CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set - # CONFIG_ARCH_RPC is not set -@@ -127,15 +138,27 @@ - # CONFIG_ARCH_S3C2410 is not set - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set - # CONFIG_ARCH_OMAP is not set - - # -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# - # Atmel AT91 System-on-Chip - # - # CONFIG_ARCH_AT91RM9200 is not set - # CONFIG_ARCH_AT91SAM9260 is not set - # CONFIG_ARCH_AT91SAM9261 is not set - CONFIG_ARCH_AT91SAM9263=y -+# CONFIG_ARCH_AT91SAM9RL is not set -+# CONFIG_ARCH_AT91X40 is not set -+CONFIG_AT91_PMC_UNIT=y - - # - # AT91SAM9263 Board Type -@@ -152,6 +175,8 @@ - # AT91 Feature Selections - # - # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+# CONFIG_ATMEL_TCLIB is not set -+CONFIG_AT91_TIMER_HZ=100 - - # - # Processor Type -@@ -174,19 +199,19 @@ - # CONFIG_CPU_DCACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_WRITETHROUGH is not set - # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+# CONFIG_OUTER_CACHE is not set - - # - # Bus support - # -- --# --# PCCARD (PCMCIA/CardBus) support --# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set - # CONFIG_PCCARD is not set - - # - # Kernel Features - # -+# CONFIG_TICK_ONESHOT is not set - # CONFIG_PREEMPT is not set - # CONFIG_NO_IDLE_HZ is not set - CONFIG_HZ=100 -@@ -199,8 +224,12 @@ - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4096 - # CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -211,6 +240,7 @@ - CONFIG_ZBOOT_ROM_BSS=0x0 - CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" - # CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set - - # - # Floating point emulation -@@ -236,7 +266,7 @@ - # Power management options - # - # CONFIG_PM is not set --# CONFIG_APM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y - - # - # Networking -@@ -246,7 +276,6 @@ - # - # Networking options - # --# CONFIG_NETDEBUG is not set - CONFIG_PACKET=y - # CONFIG_PACKET_MMAP is not set - CONFIG_UNIX=y -@@ -271,6 +300,7 @@ - # CONFIG_INET_XFRM_MODE_TRANSPORT is not set - # CONFIG_INET_XFRM_MODE_TUNNEL is not set - # CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set - # CONFIG_INET_DIAG is not set - # CONFIG_TCP_CONG_ADVANCED is not set - CONFIG_TCP_CONG_CUBIC=y -@@ -281,20 +311,8 @@ - # CONFIG_INET6_TUNNEL is not set - # CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set -- --# --# DCCP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_DCCP is not set -- --# --# SCTP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_SCTP is not set -- --# --# TIPC Configuration (EXPERIMENTAL) --# - # CONFIG_TIPC is not set - # CONFIG_ATM is not set - # CONFIG_BRIDGE is not set -@@ -307,10 +325,6 @@ - # CONFIG_LAPB is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - - # -@@ -320,7 +334,17 @@ - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -329,20 +353,14 @@ - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - CONFIG_PREVENT_FIRMWARE_BUILD=y - # CONFIG_FW_LOADER is not set - # CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# - # CONFIG_CONNECTOR is not set -- --# --# Memory Technology Devices (MTD) --# - CONFIG_MTD=y - # CONFIG_MTD_DEBUG is not set - # CONFIG_MTD_CONCAT is not set -@@ -362,6 +380,7 @@ - # CONFIG_INFTL is not set - # CONFIG_RFD_FTL is not set - # CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set - - # - # RAM/ROM/Flash chip drivers -@@ -381,7 +400,6 @@ - # CONFIG_MTD_RAM is not set - # CONFIG_MTD_ROM is not set - # CONFIG_MTD_ABSENT is not set --# CONFIG_MTD_OBSOLETE_CHIPS is not set - - # - # Mapping drivers for chip access -@@ -405,35 +423,24 @@ - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOC2001PLUS is not set -- --# --# NAND Flash Device Drivers --# - CONFIG_MTD_NAND=y - # CONFIG_MTD_NAND_VERIFY_WRITE is not set - # CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set - CONFIG_MTD_NAND_IDS=y - # CONFIG_MTD_NAND_DISKONCHIP is not set - CONFIG_MTD_NAND_AT91=y - # CONFIG_MTD_NAND_NANDSIM is not set -- --# --# OneNAND Flash Device Drivers --# -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set - # CONFIG_MTD_ONENAND is not set - - # --# Parallel port support -+# UBI - Unsorted block images - # -+# CONFIG_MTD_UBI is not set - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=y - # CONFIG_BLK_DEV_CRYPTOLOOP is not set -@@ -443,15 +450,18 @@ - CONFIG_BLK_DEV_RAM_COUNT=16 - CONFIG_BLK_DEV_RAM_SIZE=8192 - CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 --CONFIG_BLK_DEV_INITRD=y - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=y - - # - # SCSI device support - # - # CONFIG_RAID_ATTRS is not set - CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y - # CONFIG_SCSI_TGT is not set - # CONFIG_SCSI_NETLINK is not set - CONFIG_SCSI_PROC_FS=y -@@ -473,6 +483,7 @@ - # CONFIG_SCSI_CONSTANTS is not set - # CONFIG_SCSI_LOGGING is not set - # CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m - - # - # SCSI Transports -@@ -480,80 +491,65 @@ - # CONFIG_SCSI_SPI_ATTRS is not set - # CONFIG_SCSI_FC_ATTRS is not set - # CONFIG_SCSI_ISCSI_ATTRS is not set --# CONFIG_SCSI_SAS_ATTRS is not set - # CONFIG_SCSI_SAS_LIBSAS is not set -- --# --# SCSI low-level drivers --# -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y - # CONFIG_ISCSI_TCP is not set - # CONFIG_SCSI_DEBUG is not set -- --# --# Serial ATA (prod) and Parallel ATA (experimental) drivers --# - # CONFIG_ATA is not set -- --# --# Multi-device support (RAID and LVM) --# - # CONFIG_MD is not set -- --# --# Fusion MPT device support --# --# CONFIG_FUSION is not set -- --# --# IEEE 1394 (FireWire) support --# -- --# --# I2O device support --# -- --# --# Network device support --# - CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set - # CONFIG_DUMMY is not set - # CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set - # CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y - - # --# PHY device support --# --# CONFIG_PHYLIB is not set -- --# --# Ethernet (10 or 100Mbit) -+# MII PHY device drivers - # -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set - CONFIG_NET_ETHERNET=y - CONFIG_MII=y -+CONFIG_MACB=y -+# CONFIG_AX88796 is not set - # CONFIG_SMC91X is not set - # CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+CONFIG_NETDEV_1000=y -+CONFIG_NETDEV_10000=y - - # --# Ethernet (1000 Mbit) --# -- --# --# Ethernet (10000 Mbit) --# -- --# --# Token Ring devices --# -- --# --# Wireless LAN (non-hamradio) -+# Wireless LAN - # --# CONFIG_NET_RADIO is not set -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set - - # --# Wan interfaces -+# USB Network Adapters - # -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set - # CONFIG_WAN is not set - # CONFIG_PPP is not set - # CONFIG_SLIP is not set -@@ -561,10 +557,6 @@ - # CONFIG_NETCONSOLE is not set - # CONFIG_NETPOLL is not set - # CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set - - # -@@ -572,6 +564,7 @@ - # - CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set - - # - # Userland interfaces -@@ -581,20 +574,26 @@ - CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 - CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 - # CONFIG_INPUT_JOYDEV is not set --CONFIG_INPUT_TSDEV=y --CONFIG_INPUT_TSDEV_SCREEN_X=240 --CONFIG_INPUT_TSDEV_SCREEN_Y=320 - CONFIG_INPUT_EVDEV=y - # CONFIG_INPUT_EVBUG is not set - - # - # Input Device Drivers - # --# CONFIG_INPUT_KEYBOARD is not set -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=y - # CONFIG_INPUT_MOUSE is not set - # CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set - CONFIG_INPUT_TOUCHSCREEN=y - CONFIG_TOUCHSCREEN_ADS7846=y -+# CONFIG_TOUCHSCREEN_FUJITSU is not set - # CONFIG_TOUCHSCREEN_GUNZE is not set - # CONFIG_TOUCHSCREEN_ELO is not set - # CONFIG_TOUCHSCREEN_MTOUCH is not set -@@ -603,6 +602,7 @@ - # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set - # CONFIG_TOUCHSCREEN_TOUCHWIN is not set - # CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set - # CONFIG_INPUT_MISC is not set - - # -@@ -636,71 +636,47 @@ - CONFIG_UNIX98_PTYS=y - CONFIG_LEGACY_PTYS=y - CONFIG_LEGACY_PTY_COUNT=256 -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set -- --# --# Watchdog Cards --# --CONFIG_WATCHDOG=y --CONFIG_WATCHDOG_NOWAYOUT=y -- --# --# Watchdog Device Drivers --# --# CONFIG_SOFT_WATCHDOG is not set -- --# --# USB-based Watchdog Cards --# --# CONFIG_USBPCWATCHDOG is not set - CONFIG_HW_RANDOM=y - # CONFIG_NVRAM is not set --# CONFIG_DTLK is not set - # CONFIG_R3964 is not set - # CONFIG_RAW_DRIVER is not set -- --# --# TPM devices --# - # CONFIG_TCG_TPM is not set -- --# --# I2C support --# - CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=y - - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y - # CONFIG_I2C_OCORES is not set - # CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set - # CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set - # CONFIG_I2C_PCA is not set --# CONFIG_I2C_PCA_ISA is not set - - # - # Miscellaneous I2C Chip support - # - # CONFIG_SENSORS_DS1337 is not set - # CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set - # CONFIG_SENSORS_EEPROM is not set - # CONFIG_SENSORS_PCF8574 is not set - # CONFIG_SENSORS_PCA9539 is not set - # CONFIG_SENSORS_PCF8591 is not set - # CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set - # CONFIG_I2C_DEBUG_CORE is not set - # CONFIG_I2C_DEBUG_ALGO is not set - # CONFIG_I2C_DEBUG_BUS is not set -@@ -722,61 +698,80 @@ - # - # SPI Protocol Masters - # -- --# --# Dallas's 1-wire bus --# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set - # CONFIG_W1 is not set -- --# --# Hardware Monitoring support --# -+# CONFIG_POWER_SUPPLY is not set - # CONFIG_HWMON is not set --# CONFIG_HWMON_VID is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y - - # --# Misc devices -+# Watchdog Device Drivers - # --# CONFIG_TIFM_CORE is not set -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT91SAM9_WATCHDOG=y - - # --# LED devices -+# USB-based Watchdog Cards - # --# CONFIG_NEW_LEDS is not set -+# CONFIG_USBPCWATCHDOG is not set - - # --# LED drivers -+# Sonics Silicon Backplane - # -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # --# LED Triggers -+# Multifunction device drivers - # -+# CONFIG_MFD_SM501 is not set - - # - # Multimedia devices - # - # CONFIG_VIDEO_DEV is not set -- --# --# Digital Video Broadcasting Devices --# --# CONFIG_DVB is not set --# CONFIG_USB_DABUSB is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set - - # - # Graphics support - # --# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set - CONFIG_FB=y --# CONFIG_FB_CFB_FILLRECT is not set --# CONFIG_FB_CFB_COPYAREA is not set --# CONFIG_FB_CFB_IMAGEBLIT is not set -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set - # CONFIG_FB_MACMODES is not set - # CONFIG_FB_BACKLIGHT is not set - # CONFIG_FB_MODE_HELPERS is not set - # CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D15605 is not set - # CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y - # CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set - - # - # Console display driver support -@@ -784,26 +779,28 @@ - # CONFIG_VGA_CONSOLE is not set - CONFIG_DUMMY_CONSOLE=y - # CONFIG_FRAMEBUFFER_CONSOLE is not set -- --# --# Logo configuration --# - # CONFIG_LOGO is not set --# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - - # - # Sound - # - # CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set - - # --# HID Devices -+# USB Input Devices - # --CONFIG_HID=y -+# CONFIG_USB_HID is not set - - # --# USB support -+# USB HID Boot Protocol drivers - # -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+CONFIG_USB_SUPPORT=y - CONFIG_USB_ARCH_HAS_HCD=y - CONFIG_USB_ARCH_HAS_OHCI=y - # CONFIG_USB_ARCH_HAS_EHCI is not set -@@ -814,9 +811,8 @@ - # Miscellaneous USB options - # - CONFIG_USB_DEVICEFS=y --# CONFIG_USB_BANDWIDTH is not set -+CONFIG_USB_DEVICE_CLASS=y - # CONFIG_USB_DYNAMIC_MINORS is not set --# CONFIG_USB_MULTITHREAD_PROBE is not set - # CONFIG_USB_OTG is not set - - # -@@ -824,9 +820,11 @@ - # - # CONFIG_USB_ISP116X_HCD is not set - CONFIG_USB_OHCI_HCD=y --# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set - CONFIG_USB_OHCI_LITTLE_ENDIAN=y - # CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set - - # - # USB Device Class drivers -@@ -845,6 +843,7 @@ - # CONFIG_USB_STORAGE_DEBUG is not set - # CONFIG_USB_STORAGE_DATAFAB is not set - # CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set - # CONFIG_USB_STORAGE_DPCM is not set - # CONFIG_USB_STORAGE_USBAT is not set - # CONFIG_USB_STORAGE_SDDR09 is not set -@@ -856,43 +855,10 @@ - # CONFIG_USB_LIBUSUAL is not set - - # --# USB Input Devices --# --# CONFIG_USB_HID is not set -- --# --# USB HID Boot Protocol drivers --# --# CONFIG_USB_KBD is not set --# CONFIG_USB_MOUSE is not set --# CONFIG_USB_AIPTEK is not set --# CONFIG_USB_WACOM is not set --# CONFIG_USB_ACECAD is not set --# CONFIG_USB_KBTAB is not set --# CONFIG_USB_POWERMATE is not set --# CONFIG_USB_TOUCHSCREEN is not set --# CONFIG_USB_YEALINK is not set --# CONFIG_USB_XPAD is not set --# CONFIG_USB_ATI_REMOTE is not set --# CONFIG_USB_ATI_REMOTE2 is not set --# CONFIG_USB_KEYSPAN_REMOTE is not set --# CONFIG_USB_APPLETOUCH is not set -- --# - # USB Imaging devices - # - # CONFIG_USB_MDC800 is not set - # CONFIG_USB_MICROTEK is not set -- --# --# USB Network Adapters --# --# CONFIG_USB_CATC is not set --# CONFIG_USB_KAWETH is not set --# CONFIG_USB_PEGASUS is not set --# CONFIG_USB_RTL8150 is not set --# CONFIG_USB_USBNET_MII is not set --# CONFIG_USB_USBNET is not set - CONFIG_USB_MON=y - - # -@@ -914,6 +880,7 @@ - # CONFIG_USB_RIO500 is not set - # CONFIG_USB_LEGOTOWER is not set - # CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set - # CONFIG_USB_LED is not set - # CONFIG_USB_CYPRESS_CY7C63 is not set - # CONFIG_USB_CYTHERM is not set -@@ -923,6 +890,7 @@ - # CONFIG_USB_APPLEDISPLAY is not set - # CONFIG_USB_LD is not set - # CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set - # CONFIG_USB_TEST is not set - - # -@@ -933,13 +901,19 @@ - # USB Gadget Support - # - CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set - CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set - # CONFIG_USB_GADGET_NET2280 is not set - # CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set - # CONFIG_USB_GADGET_GOKU is not set - # CONFIG_USB_GADGET_LH7A40X is not set - # CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set - CONFIG_USB_GADGET_AT91=y - CONFIG_USB_AT91=y - # CONFIG_USB_GADGET_DUMMY_HCD is not set -@@ -951,21 +925,73 @@ - # CONFIG_USB_FILE_STORAGE_TEST is not set - CONFIG_USB_G_SERIAL=m - # CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set - - # --# MMC/SD Card support -+# MMC/SD Card Drivers - # --CONFIG_MMC=y --# CONFIG_MMC_DEBUG is not set - CONFIG_MMC_BLOCK=y --CONFIG_MMC_AT91=m --# CONFIG_MMC_TIFM_SD is not set -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set - - # --# Real Time Clock -+# MMC/SD Host Controller Drivers - # -+CONFIG_MMC_AT91=m -+# CONFIG_MMC_SPI is not set -+# CONFIG_NEW_LEDS is not set - CONFIG_RTC_LIB=y --# CONFIG_RTC_CLASS is not set -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT91SAM9=y - - # - # File systems -@@ -1016,7 +1042,6 @@ - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y - # CONFIG_CONFIGFS_FS is not set - - # -@@ -1032,10 +1057,12 @@ - CONFIG_JFFS2_FS=y - CONFIG_JFFS2_FS_DEBUG=0 - CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set - # CONFIG_JFFS2_SUMMARY is not set - # CONFIG_JFFS2_FS_XATTR is not set - # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set - CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set - CONFIG_JFFS2_RTIME=y - # CONFIG_JFFS2_RUBIN is not set - CONFIG_CRAMFS=y -@@ -1044,10 +1071,7 @@ - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - CONFIG_NFS_FS=y - # CONFIG_NFS_V3 is not set - # CONFIG_NFS_V4 is not set -@@ -1057,6 +1081,7 @@ - CONFIG_LOCKD=y - CONFIG_NFS_COMMON=y - CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set - # CONFIG_RPCSEC_GSS_KRB5 is not set - # CONFIG_RPCSEC_GSS_SPKM3 is not set - # CONFIG_SMB_FS is not set -@@ -1064,17 +1089,12 @@ - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set --# CONFIG_9P_FS is not set - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# - CONFIG_NLS=y - CONFIG_NLS_DEFAULT="iso8859-1" - CONFIG_NLS_CODEPAGE_437=y -@@ -1115,36 +1135,35 @@ - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set - # CONFIG_NLS_UTF8 is not set -- --# --# Distributed Lock Manager --# - # CONFIG_DLM is not set -- --# --# Profiling support --# -+CONFIG_INSTRUMENTATION=y - # CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y - CONFIG_ENABLE_MUST_CHECK=y - # CONFIG_MAGIC_SYSRQ is not set - # CONFIG_UNUSED_SYMBOLS is not set - # CONFIG_DEBUG_FS is not set - # CONFIG_HEADERS_CHECK is not set - CONFIG_DEBUG_KERNEL=y --CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_DEBUG_SHIRQ is not set - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set - # CONFIG_DEBUG_SLAB is not set - # CONFIG_DEBUG_RT_MUTEXES is not set - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set - # CONFIG_DEBUG_MUTEXES is not set --# CONFIG_DEBUG_RWSEMS is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set - # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set -@@ -1152,9 +1171,13 @@ - # CONFIG_DEBUG_INFO is not set - # CONFIG_DEBUG_VM is not set - # CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y - CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set - CONFIG_DEBUG_USER=y - # CONFIG_DEBUG_ERRORS is not set - CONFIG_DEBUG_LL=y -@@ -1165,10 +1188,7 @@ - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set - # CONFIG_CRYPTO is not set - - # -@@ -1177,8 +1197,13 @@ - CONFIG_BITREVERSE=y - # CONFIG_CRC_CCITT is not set - # CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set - CONFIG_CRC32=y -+# CONFIG_CRC7 is not set - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y - CONFIG_PLIST=y --CONFIG_IOMAP_COPY=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig linux-2.6/arch/arm/configs/at91sam9rlek_defconfig ---- linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/at91sam9rlek_defconfig 2008-01-08 22:24:22.000000000 +0200 -@@ -1,15 +1,18 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.21 --# Mon May 7 16:30:40 2007 -+# Linux kernel version: 2.6.24-rc7 -+# Tue Jan 8 22:24:14 2008 - # - CONFIG_ARM=y - CONFIG_SYS_SUPPORTS_APM_EMULATION=y - CONFIG_GENERIC_GPIO=y - # CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set - CONFIG_MMU=y - # CONFIG_NO_IOPORT is not set - CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y - CONFIG_TRACE_IRQFLAGS_SUPPORT=y - CONFIG_HARDIRQS_SW_RESEND=y - CONFIG_GENERIC_IRQ_PROBE=y -@@ -23,27 +26,28 @@ - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set - # CONFIG_SWAP is not set - CONFIG_SYSVIPC=y --# CONFIG_IPC_NS is not set - CONFIG_SYSVIPC_SYSCTL=y - # CONFIG_POSIX_MQUEUE is not set - # CONFIG_BSD_PROCESS_ACCT is not set - # CONFIG_TASKSTATS is not set --# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set - # CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set - CONFIG_SYSFS_DEPRECATED=y - # CONFIG_RELAY is not set - CONFIG_BLK_DEV_INITRD=y -@@ -62,32 +66,30 @@ - CONFIG_ELF_CORE=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y - CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y - CONFIG_SHMEM=y --CONFIG_SLAB=y - CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 --# CONFIG_SLOB is not set -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - CONFIG_KMOD=y -- --# --# Block layer --# - CONFIG_BLOCK=y - # CONFIG_LBD is not set - # CONFIG_BLK_DEV_IO_TRACE is not set - # CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -119,14 +121,16 @@ - # CONFIG_ARCH_NETX is not set - # CONFIG_ARCH_H720X is not set - # CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set - # CONFIG_ARCH_IOP32X is not set - # CONFIG_ARCH_IOP33X is not set --# CONFIG_ARCH_IOP13XX is not set --# CONFIG_ARCH_IXP4XX is not set --# CONFIG_ARCH_IXP2000 is not set - # CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set - # CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set - # CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set - # CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set - # CONFIG_ARCH_RPC is not set -@@ -134,9 +138,18 @@ - # CONFIG_ARCH_S3C2410 is not set - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set - # CONFIG_ARCH_OMAP is not set - - # -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# - # Atmel AT91 System-on-Chip - # - # CONFIG_ARCH_AT91RM9200 is not set -@@ -144,6 +157,8 @@ - # CONFIG_ARCH_AT91SAM9261 is not set - # CONFIG_ARCH_AT91SAM9263 is not set - CONFIG_ARCH_AT91SAM9RL=y -+# CONFIG_ARCH_AT91X40 is not set -+CONFIG_AT91_PMC_UNIT=y - - # - # AT91SAM9RL Board Type -@@ -157,7 +172,9 @@ - # - # AT91 Feature Selections - # --# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -+# CONFIG_ATMEL_TCLIB is not set -+CONFIG_AT91_TIMER_HZ=100 - - # - # Processor Type -@@ -185,15 +202,14 @@ - # - # Bus support - # -- --# --# PCCARD (PCMCIA/CardBus) support --# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set - # CONFIG_PCCARD is not set - - # - # Kernel Features - # -+# CONFIG_TICK_ONESHOT is not set - # CONFIG_PREEMPT is not set - # CONFIG_NO_IDLE_HZ is not set - CONFIG_HZ=100 -@@ -206,9 +222,12 @@ - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4096 - # CONFIG_RESOURCES_64BIT is not set - CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -245,6 +264,7 @@ - # Power management options - # - # CONFIG_PM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y - - # - # Networking -@@ -254,7 +274,6 @@ - # - # Networking options - # --# CONFIG_NETDEBUG is not set - # CONFIG_PACKET is not set - CONFIG_UNIX=y - # CONFIG_NET_KEY is not set -@@ -271,10 +290,6 @@ - # CONFIG_X25 is not set - # CONFIG_LAPB is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - - # -@@ -284,7 +299,16 @@ - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -293,21 +317,14 @@ - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - CONFIG_PREVENT_FIRMWARE_BUILD=y - # CONFIG_FW_LOADER is not set - # CONFIG_DEBUG_DRIVER is not set - # CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# - # CONFIG_CONNECTOR is not set -- --# --# Memory Technology Devices (MTD) --# - CONFIG_MTD=y - # CONFIG_MTD_DEBUG is not set - CONFIG_MTD_CONCAT=y -@@ -327,6 +344,7 @@ - # CONFIG_INFTL is not set - # CONFIG_RFD_FTL is not set - # CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set - - # - # RAM/ROM/Flash chip drivers -@@ -346,7 +364,6 @@ - # CONFIG_MTD_RAM is not set - # CONFIG_MTD_ROM is not set - # CONFIG_MTD_ABSENT is not set --# CONFIG_MTD_OBSOLETE_CHIPS is not set - - # - # Mapping drivers for chip access -@@ -370,36 +387,23 @@ - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOC2001PLUS is not set -- --# --# NAND Flash Device Drivers --# - CONFIG_MTD_NAND=y - # CONFIG_MTD_NAND_VERIFY_WRITE is not set - # CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set - CONFIG_MTD_NAND_IDS=y - # CONFIG_MTD_NAND_DISKONCHIP is not set - CONFIG_MTD_NAND_AT91=y - # CONFIG_MTD_NAND_NANDSIM is not set -- --# --# OneNAND Flash Device Drivers --# -+# CONFIG_MTD_NAND_PLATFORM is not set - # CONFIG_MTD_ONENAND is not set - - # --# Parallel port support -+# UBI - Unsorted block images - # -+# CONFIG_MTD_UBI is not set - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# --# CONFIG_PNPACPI is not set -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=y - # CONFIG_BLK_DEV_CRYPTOLOOP is not set -@@ -410,12 +414,16 @@ - CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=y - - # - # SCSI device support - # - # CONFIG_RAID_ATTRS is not set - CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y - # CONFIG_SCSI_TGT is not set - # CONFIG_SCSI_NETLINK is not set - CONFIG_SCSI_PROC_FS=y -@@ -437,6 +445,7 @@ - # CONFIG_SCSI_CONSTANTS is not set - # CONFIG_SCSI_LOGGING is not set - # CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m - - # - # SCSI Transports -@@ -444,47 +453,13 @@ - # CONFIG_SCSI_SPI_ATTRS is not set - # CONFIG_SCSI_FC_ATTRS is not set - # CONFIG_SCSI_ISCSI_ATTRS is not set --# CONFIG_SCSI_SAS_ATTRS is not set - # CONFIG_SCSI_SAS_LIBSAS is not set -- --# --# SCSI low-level drivers --# -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y - # CONFIG_SCSI_DEBUG is not set -- --# --# Serial ATA (prod) and Parallel ATA (experimental) drivers --# - # CONFIG_ATA is not set -- --# --# Multi-device support (RAID and LVM) --# - # CONFIG_MD is not set -- --# --# Fusion MPT device support --# --# CONFIG_FUSION is not set -- --# --# IEEE 1394 (FireWire) support --# -- --# --# I2O device support --# -- --# --# Network device support --# - # CONFIG_NETDEVICES is not set --# CONFIG_NETPOLL is not set --# CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set - - # -@@ -492,6 +467,7 @@ - # - CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set - - # - # Userland interfaces -@@ -501,7 +477,6 @@ - CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 - CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 - # CONFIG_INPUT_JOYDEV is not set --# CONFIG_INPUT_TSDEV is not set - CONFIG_INPUT_EVDEV=y - # CONFIG_INPUT_EVBUG is not set - -@@ -511,8 +486,10 @@ - # CONFIG_INPUT_KEYBOARD is not set - # CONFIG_INPUT_MOUSE is not set - # CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set - CONFIG_INPUT_TOUCHSCREEN=y - # CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set - # CONFIG_TOUCHSCREEN_GUNZE is not set - # CONFIG_TOUCHSCREEN_ELO is not set - # CONFIG_TOUCHSCREEN_MTOUCH is not set -@@ -521,6 +498,7 @@ - # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set - # CONFIG_TOUCHSCREEN_TOUCHWIN is not set - # CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set - # CONFIG_INPUT_MISC is not set - - # -@@ -554,37 +532,50 @@ - CONFIG_UNIX98_PTYS=y - CONFIG_LEGACY_PTYS=y - CONFIG_LEGACY_PTY_COUNT=256 -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set -- --# --# Watchdog Cards --# --CONFIG_WATCHDOG=y --CONFIG_WATCHDOG_NOWAYOUT=y -- --# --# Watchdog Device Drivers --# --# CONFIG_SOFT_WATCHDOG is not set --CONFIG_HW_RANDOM=y -+# CONFIG_HW_RANDOM is not set - # CONFIG_NVRAM is not set --# CONFIG_DTLK is not set - # CONFIG_R3964 is not set - # CONFIG_RAW_DRIVER is not set -- --# --# TPM devices --# - # CONFIG_TCG_TPM is not set -- --# --# I2C support --# --# CONFIG_I2C is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=y -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_GPIO=y -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_PCA is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set - - # - # SPI support -@@ -603,21 +594,25 @@ - # SPI Protocol Masters - # - # CONFIG_SPI_AT25 is not set -- --# --# Dallas's 1-wire bus --# -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set - # CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y - - # --# Hardware Monitoring support -+# Watchdog Device Drivers - # --# CONFIG_HWMON is not set --# CONFIG_HWMON_VID is not set -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT91SAM9_WATCHDOG=y - - # --# Misc devices -+# Sonics Silicon Backplane - # -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # - # Multifunction device drivers -@@ -625,37 +620,28 @@ - # CONFIG_MFD_SM501 is not set - - # --# LED devices --# --# CONFIG_NEW_LEDS is not set -- --# --# LED drivers --# -- --# --# LED Triggers --# -- --# - # Multimedia devices - # - # CONFIG_VIDEO_DEV is not set -- --# --# Digital Video Broadcasting Devices --# -+# CONFIG_DAB is not set - - # - # Graphics support - # --# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set - CONFIG_FB=y - # CONFIG_FIRMWARE_EDID is not set - # CONFIG_FB_DDC is not set - CONFIG_FB_CFB_FILLRECT=y - CONFIG_FB_CFB_COPYAREA=y - CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y - # CONFIG_FB_SVGALIB is not set - # CONFIG_FB_MACMODES is not set - # CONFIG_FB_BACKLIGHT is not set -@@ -665,9 +651,16 @@ - # - # Frame buffer hardware drivers - # -+# CONFIG_FB_S1D15605 is not set - # CONFIG_FB_S1D13XXX is not set - CONFIG_FB_ATMEL=y - # CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set - - # - # Console display driver support -@@ -675,97 +668,97 @@ - # CONFIG_VGA_CONSOLE is not set - CONFIG_DUMMY_CONSOLE=y - # CONFIG_FRAMEBUFFER_CONSOLE is not set -- --# --# Logo configuration --# - # CONFIG_LOGO is not set - - # - # Sound - # --CONFIG_SOUND=y -- --# --# Advanced Linux Sound Architecture --# --CONFIG_SND=y --CONFIG_SND_TIMER=y --CONFIG_SND_PCM=y --CONFIG_SND_SEQUENCER=y --CONFIG_SND_SEQ_DUMMY=y --CONFIG_SND_OSSEMUL=y --CONFIG_SND_MIXER_OSS=y --CONFIG_SND_PCM_OSS=y --CONFIG_SND_PCM_OSS_PLUGINS=y --CONFIG_SND_SEQUENCER_OSS=y --# CONFIG_SND_DYNAMIC_MINORS is not set --CONFIG_SND_SUPPORT_OLD_API=y --CONFIG_SND_VERBOSE_PROCFS=y --CONFIG_SND_VERBOSE_PRINTK=y --CONFIG_SND_DEBUG=y --CONFIG_SND_DEBUG_DETECT=y --# CONFIG_SND_PCM_XRUN_DEBUG is not set -- --# --# Generic devices --# --# CONFIG_SND_DUMMY is not set --# CONFIG_SND_VIRMIDI is not set --# CONFIG_SND_MTPAV is not set --# CONFIG_SND_SERIAL_U16550 is not set --# CONFIG_SND_MPU401 is not set -+# CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+# CONFIG_USB is not set - - # --# ALSA ARM devices -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' - # - - # --# SoC audio support -+# USB Gadget Support - # --# CONFIG_SND_SOC is not set -+# CONFIG_USB_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set - - # --# Open Sound System -+# MMC/SD Card Drivers - # --# CONFIG_SOUND_PRIME is not set -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set - - # --# HID Devices -+# MMC/SD Host Controller Drivers - # --CONFIG_HID=y --# CONFIG_HID_DEBUG is not set -+CONFIG_MMC_AT91=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_NEW_LEDS is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set - - # --# USB support -+# RTC interfaces - # --CONFIG_USB_ARCH_HAS_HCD=y --CONFIG_USB_ARCH_HAS_OHCI=y --# CONFIG_USB_ARCH_HAS_EHCI is not set --# CONFIG_USB is not set -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set - - # --# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# I2C RTC drivers - # -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set - - # --# USB Gadget Support -+# SPI RTC drivers - # --# CONFIG_USB_GADGET is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set - - # --# MMC/SD Card support -+# Platform RTC drivers - # --CONFIG_MMC=y --# CONFIG_MMC_DEBUG is not set --CONFIG_MMC_BLOCK=y --CONFIG_MMC_AT91=y -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set - - # --# Real Time Clock -+# on-CPU RTC drivers - # --CONFIG_RTC_LIB=y --# CONFIG_RTC_CLASS is not set -+CONFIG_RTC_DRV_AT91SAM9=y - - # - # File systems -@@ -816,7 +809,6 @@ - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y - # CONFIG_CONFIGFS_FS is not set - - # -@@ -836,20 +828,13 @@ - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# - CONFIG_NLS=y - CONFIG_NLS_DEFAULT="iso8859-1" - CONFIG_NLS_CODEPAGE_437=y -@@ -890,16 +875,15 @@ - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set - CONFIG_NLS_UTF8=y -- --# --# Profiling support --# -+CONFIG_INSTRUMENTATION=y - # CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y - CONFIG_ENABLE_MUST_CHECK=y - # CONFIG_MAGIC_SYSRQ is not set - # CONFIG_UNUSED_SYMBOLS is not set -@@ -907,8 +891,8 @@ - # CONFIG_HEADERS_CHECK is not set - CONFIG_DEBUG_KERNEL=y - # CONFIG_DEBUG_SHIRQ is not set --CONFIG_LOG_BUF_SHIFT=14 - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set - # CONFIG_TIMER_STATS is not set - # CONFIG_DEBUG_SLAB is not set -@@ -916,6 +900,9 @@ - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set - # CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set - # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set -@@ -923,10 +910,13 @@ - CONFIG_DEBUG_INFO=y - # CONFIG_DEBUG_VM is not set - # CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y - CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set - # CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set - CONFIG_DEBUG_USER=y - # CONFIG_DEBUG_ERRORS is not set - CONFIG_DEBUG_LL=y -@@ -937,10 +927,7 @@ - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set - # CONFIG_CRYPTO is not set - - # -@@ -949,9 +936,12 @@ - CONFIG_BITREVERSE=y - # CONFIG_CRC_CCITT is not set - # CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set - CONFIG_CRC32=y -+# CONFIG_CRC7 is not set - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y - CONFIG_PLIST=y - CONFIG_HAS_IOMEM=y - CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/ateb9200_defconfig linux-2.6/arch/arm/configs/ateb9200_defconfig ---- linux-2.6.24/arch/arm/configs/ateb9200_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/ateb9200_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -714,7 +714,7 @@ - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=m -+CONFIG_I2C_GPIO=m - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_STUB is not set - # CONFIG_I2C_PCA_ISA is not set -diff -urN -x CVS linux-2.6.24/arch/arm/configs/cam60_defconfig linux-2.6/arch/arm/configs/cam60_defconfig ---- linux-2.6.24/arch/arm/configs/cam60_defconfig 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/configs/cam60_defconfig 2008-01-11 09:36:44.000000000 +0200 -@@ -0,0 +1,1217 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.23 -+# Wed Jan 9 22:44:49 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+CONFIG_AUDIT=y -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=17 -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_RELAY=y -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+CONFIG_KALLSYMS_ALL=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+CONFIG_BLK_DEV_IO_TRACE=y -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# -+# Atmel AT91 System-on-Chip -+# -+# CONFIG_ARCH_AT91RM9200 is not set -+CONFIG_ARCH_AT91SAM9260=y -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+ -+# -+# AT91SAM9260 Variants -+# -+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set -+ -+# -+# AT91SAM9260 / AT91SAM9XE Board Type -+# -+# CONFIG_MACH_AT91SAM9260EK is not set -+CONFIG_MACH_CAM60=y -+# CONFIG_MACH_SAM9_L9260 is not set -+ -+# -+# AT91 Board Options -+# -+ -+# -+# AT91 Feature Selections -+# -+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+# CONFIG_ATMEL_TCLIB is not set -+CONFIG_AT91_TIMER_HZ=100 -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM926T=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5TJ=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+CONFIG_PCCARD=m -+# CONFIG_PCMCIA_DEBUG is not set -+CONFIG_PCMCIA=m -+CONFIG_PCMCIA_LOAD_CIS=y -+CONFIG_PCMCIA_IOCTL=y -+ -+# -+# PC-card bridges -+# -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_LEDS is not set -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0 -+CONFIG_ZBOOT_ROM_BSS=0x20004000 -+# CONFIG_ZBOOT_ROM is not set -+CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+# CONFIG_VFP is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+CONFIG_BINFMT_AOUT=y -+CONFIG_BINFMT_MISC=y -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+CONFIG_NETWORK_SECMARK=y -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+CONFIG_CFG80211=m -+CONFIG_WIRELESS_EXT=y -+CONFIG_MAC80211=m -+# CONFIG_MAC80211_DEBUGFS is not set -+# CONFIG_MAC80211_DEBUG is not set -+CONFIG_IEEE80211=m -+# CONFIG_IEEE80211_DEBUG is not set -+CONFIG_IEEE80211_CRYPT_WEP=m -+CONFIG_IEEE80211_CRYPT_CCMP=m -+CONFIG_IEEE80211_CRYPT_TKIP=m -+CONFIG_IEEE80211_SOFTMAC=m -+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=m -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_RAM=m -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+CONFIG_MTD_COMPLEX_MAPPINGS=y -+CONFIG_MTD_PLATRAM=m -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=y -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+CONFIG_MTD_BLOCK2MTD=y -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_AT91=y -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+CONFIG_SCSI_TGT=y -+CONFIG_SCSI_NETLINK=y -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+CONFIG_CHR_DEV_SG=y -+CONFIG_CHR_DEV_SCH=y -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+CONFIG_SCSI_LOGGING=y -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+CONFIG_SCSI_SPI_ATTRS=m -+CONFIG_SCSI_FC_ATTRS=m -+CONFIG_SCSI_ISCSI_ATTRS=m -+CONFIG_SCSI_SAS_ATTRS=m -+CONFIG_SCSI_SAS_LIBSAS=m -+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+CONFIG_MARVELL_PHY=m -+CONFIG_DAVICOM_PHY=m -+CONFIG_QSEMI_PHY=m -+CONFIG_LXT_PHY=m -+CONFIG_CICADA_PHY=m -+CONFIG_VITESSE_PHY=m -+CONFIG_SMSC_PHY=m -+CONFIG_BROADCOM_PHY=m -+# CONFIG_ICPLUS_PHY is not set -+CONFIG_FIXED_PHY=m -+# CONFIG_FIXED_MII_10_FDX is not set -+# CONFIG_FIXED_MII_100_FDX is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=m -+CONFIG_MACB=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_NET_PCMCIA is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+CONFIG_KEYBOARD_ATKBD=y -+CONFIG_KEYBOARD_SUNKBD=m -+CONFIG_KEYBOARD_LKKBD=m -+CONFIG_KEYBOARD_XTKBD=m -+CONFIG_KEYBOARD_NEWTON=m -+CONFIG_KEYBOARD_STOWAWAY=m -+# CONFIG_KEYBOARD_GPIO is not set -+CONFIG_INPUT_MOUSE=y -+CONFIG_MOUSE_PS2=y -+CONFIG_MOUSE_PS2_ALPS=y -+CONFIG_MOUSE_PS2_LOGIPS2PP=y -+CONFIG_MOUSE_PS2_SYNAPTICS=y -+CONFIG_MOUSE_PS2_LIFEBOOK=y -+CONFIG_MOUSE_PS2_TRACKPOINT=y -+# CONFIG_MOUSE_PS2_TOUCHKIT is not set -+CONFIG_MOUSE_SERIAL=m -+CONFIG_MOUSE_APPLETOUCH=m -+CONFIG_MOUSE_VSXXXAA=m -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+CONFIG_SERIO_LIBPS2=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+CONFIG_SERIAL_NONSTANDARD=y -+# CONFIG_MOXA_SMARTIO is not set -+# CONFIG_N_HDLC is not set -+# CONFIG_RISCOM8 is not set -+# CONFIG_SPECIALIX is not set -+# CONFIG_RIO is not set -+# CONFIG_STALDRV is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_WATCHDOG is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+ -+# -+# PCMCIA character devices -+# -+# CONFIG_SYNCLINK_CS is not set -+# CONFIG_CARDMAN_4000 is not set -+# CONFIG_CARDMAN_4040 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=y -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_AT91 is not set -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+# CONFIG_I2C_PCA is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+# CONFIG_HWMON is not set -+# CONFIG_MISC_DEVICES is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+# CONFIG_NEW_LEDS is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+# CONFIG_HID_SUPPORT is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_ONETOUCH is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+# CONFIG_USB_GADGET is not set -+# CONFIG_MMC is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+CONFIG_RTC_INTF_DEV_UIE_EMUL=y -+CONFIG_RTC_DRV_TEST=m -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT91SAM9=y -+ -+# -+# DMA Engine support -+# -+# CONFIG_DMA_ENGINE is not set -+ -+# -+# DMA Clients -+# -+ -+# -+# DMA Devices -+# -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+CONFIG_EXT2_FS_XATTR=y -+CONFIG_EXT2_FS_POSIX_ACL=y -+# CONFIG_EXT2_FS_SECURITY is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+# CONFIG_EXT3_FS_POSIX_ACL is not set -+# CONFIG_EXT3_FS_SECURITY is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+CONFIG_QUOTA=y -+# CONFIG_QFMT_V1 is not set -+# CONFIG_QFMT_V2 is not set -+CONFIG_QUOTACTL=y -+CONFIG_DNOTIFY=y -+CONFIG_AUTOFS_FS=y -+CONFIG_AUTOFS4_FS=y -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="cp437" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+ -+# -+# Distributed Lock Manager -+# -+# CONFIG_DLM is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_PRINTK_TIME=y -+# CONFIG_ENABLE_MUST_CHECK is not set -+CONFIG_MAGIC_SYSRQ=y -+CONFIG_UNUSED_SYMBOLS=y -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+# CONFIG_DEBUG_BUGVERBOSE is not set -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_FORCED_INLINING is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_DEBUG_USER is not set -+# CONFIG_DEBUG_ERRORS is not set -+# CONFIG_DEBUG_LL is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_ABLKCIPHER=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_CBC=m -+CONFIG_CRYPTO_PCBC=m -+CONFIG_CRYPTO_LRW=m -+CONFIG_CRYPTO_CRYPTD=m -+CONFIG_CRYPTO_DES=m -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_TEST=m -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_AUDIT_GENERIC=y -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb337_defconfig linux-2.6/arch/arm/configs/csb337_defconfig ---- linux-2.6.24/arch/arm/configs/csb337_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/csb337_defconfig 2008-01-09 22:19:31.000000000 +0200 -@@ -1,69 +1,96 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.15 --# Mon Jan 9 21:51:31 2006 -+# Linux kernel version: 2.6.24-rc7 -+# Wed Jan 9 22:19:24 2008 - # - CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_TIME=y -+CONFIG_GENERIC_CLOCKEVENTS=y - CONFIG_MMU=y --CONFIG_UID16=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y - CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # --# Code maturity level options -+# General setup - # - CONFIG_EXPERIMENTAL=y --CONFIG_CLEAN_COMPILE=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 -- --# --# General setup --# - CONFIG_LOCALVERSION="" - CONFIG_LOCALVERSION_AUTO=y - # CONFIG_SWAP is not set - CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y - # CONFIG_POSIX_MQUEUE is not set - # CONFIG_BSD_PROCESS_ACCT is not set --CONFIG_SYSCTL=y -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set - # CONFIG_AUDIT is not set --CONFIG_HOTPLUG=y --CONFIG_KOBJECT_UEVENT=y - # CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y - CONFIG_INITRAMFS_SOURCE="" - CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y - # CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y - CONFIG_KALLSYMS=y - # CONFIG_KALLSYMS_ALL is not set - # CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y - CONFIG_PRINTK=y - CONFIG_BUG=y -+CONFIG_ELF_CORE=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y - CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y - CONFIG_SHMEM=y --CONFIG_CC_ALIGN_FUNCTIONS=0 --CONFIG_CC_ALIGN_LABELS=0 --CONFIG_CC_ALIGN_LOOPS=0 --CONFIG_CC_ALIGN_JUMPS=0 -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 -- --# --# Loadable module support --# - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set --CONFIG_OBSOLETE_MODPARM=y - # CONFIG_MODVERSIONS is not set - # CONFIG_MODULE_SRCVERSION_ALL is not set - CONFIG_KMOD=y -- --# --# Block layer --# -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set - - # - # IO Schedulers -@@ -81,62 +108,101 @@ - # - # System Type - # -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y - # CONFIG_ARCH_CLPS7500 is not set - # CONFIG_ARCH_CLPS711X is not set - # CONFIG_ARCH_CO285 is not set - # CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set - # CONFIG_ARCH_FOOTBRIDGE is not set --# CONFIG_ARCH_INTEGRATOR is not set --# CONFIG_ARCH_IOP3XX is not set --# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set - # CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set - # CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set - # CONFIG_ARCH_RPC is not set - # CONFIG_ARCH_SA1100 is not set - # CONFIG_ARCH_S3C2410 is not set - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set - # CONFIG_ARCH_OMAP is not set --# CONFIG_ARCH_VERSATILE is not set --# CONFIG_ARCH_REALVIEW is not set --# CONFIG_ARCH_IMX is not set --# CONFIG_ARCH_H720X is not set --# CONFIG_ARCH_AAEC2000 is not set --CONFIG_ARCH_AT91=y --CONFIG_ARCH_AT91RM9200=y - - # --# AT91RM9200 Implementations -+# Boot options - # - - # -+# Power management -+# -+ -+# -+# Atmel AT91 System-on-Chip -+# -+CONFIG_ARCH_AT91RM9200=y -+# CONFIG_ARCH_AT91SAM9260 is not set -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+# CONFIG_ARCH_AT91X40 is not set -+CONFIG_AT91_PMC_UNIT=y -+ -+# - # AT91RM9200 Board Type - # -+# CONFIG_MACH_ONEARM is not set - # CONFIG_ARCH_AT91RM9200DK is not set - # CONFIG_MACH_AT91RM9200EK is not set - CONFIG_MACH_CSB337=y - # CONFIG_MACH_CSB637 is not set - # CONFIG_MACH_CARMEVA is not set --# CONFIG_MACH_KB9200 is not set - # CONFIG_MACH_ATEB9200 is not set -+# CONFIG_MACH_KB9200 is not set -+# CONFIG_MACH_PICOTUX2XX is not set -+# CONFIG_MACH_KAFA is not set -+# CONFIG_MACH_CHUB is not set -+# CONFIG_MACH_HOMEMATIC is not set -+# CONFIG_MACH_ECBAT91 is not set -+# CONFIG_MACH_SWEDATMS is not set - - # --# AT91RM9200 Feature Selections -+# AT91 Board Options -+# -+ -+# -+# AT91 Feature Selections - # - CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -+# CONFIG_ATMEL_TCLIB is not set -+CONFIG_AT91_TIMER_HZ=128 - - # - # Processor Type - # - CONFIG_CPU_32=y - CONFIG_CPU_ARM920T=y --CONFIG_CPU_32v4=y -+CONFIG_CPU_32v4T=y - CONFIG_CPU_ABRT_EV4T=y - CONFIG_CPU_CACHE_V4WT=y - CONFIG_CPU_CACHE_VIVT=y - CONFIG_CPU_COPY_V4WB=y - CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y - - # - # Processor Features -@@ -145,15 +211,13 @@ - # CONFIG_CPU_ICACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set - - # - # Bus support - # --CONFIG_ISA_DMA_API=y -- --# --# PCCARD (PCMCIA/CardBus) support --# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set - CONFIG_PCCARD=y - # CONFIG_PCMCIA_DEBUG is not set - CONFIG_PCMCIA=y -@@ -168,8 +232,13 @@ - # - # Kernel Features - # -+# CONFIG_TICK_ONESHOT is not set -+# CONFIG_NO_HZ is not set -+# CONFIG_HIGH_RES_TIMERS is not set -+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y - # CONFIG_PREEMPT is not set --# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=128 -+# CONFIG_AEABI is not set - # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set - CONFIG_SELECT_MEMORY_MODEL=y - CONFIG_FLATMEM_MANUAL=y -@@ -178,9 +247,13 @@ - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y - # CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y - CONFIG_LEDS=y --CONFIG_LEDS_TIMER=y - CONFIG_LEDS_CPU=y - CONFIG_ALIGNMENT_TRAP=y - -@@ -191,6 +264,7 @@ - CONFIG_ZBOOT_ROM_BSS=0x0 - CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" - # CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set - - # - # Floating point emulation -@@ -215,6 +289,7 @@ - # Power management options - # - # CONFIG_PM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y - - # - # Networking -@@ -227,6 +302,10 @@ - CONFIG_PACKET=y - # CONFIG_PACKET_MMAP is not set - CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set - # CONFIG_NET_KEY is not set - CONFIG_INET=y - # CONFIG_IP_MULTICAST is not set -@@ -243,23 +322,26 @@ - # CONFIG_INET_AH is not set - # CONFIG_INET_ESP is not set - # CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set - # CONFIG_INET_TUNNEL is not set -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set - CONFIG_INET_DIAG=y - CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set --CONFIG_TCP_CONG_BIC=y -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set - # CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set -- --# --# DCCP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_DCCP is not set -- --# --# SCTP Configuration (EXPERIMENTAL) --# - # CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set - # CONFIG_ATM is not set - # CONFIG_BRIDGE is not set - # CONFIG_VLAN_8021Q is not set -@@ -269,13 +351,8 @@ - # CONFIG_ATALK is not set - # CONFIG_X25 is not set - # CONFIG_LAPB is not set --# CONFIG_NET_DIVERT is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -- --# --# QoS and/or fair queueing --# - # CONFIG_NET_SCHED is not set - - # -@@ -285,7 +362,17 @@ - # CONFIG_HAMRADIO is not set - # CONFIG_IRDA is not set - # CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set - - # - # Device Drivers -@@ -294,19 +381,14 @@ - # - # Generic Driver Options - # -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - CONFIG_PREVENT_FIRMWARE_BUILD=y - CONFIG_FW_LOADER=y - # CONFIG_DEBUG_DRIVER is not set -- --# --# Connector - unified userspace <-> kernelspace linker --# -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set - # CONFIG_CONNECTOR is not set -- --# --# Memory Technology Devices (MTD) --# - CONFIG_MTD=y - # CONFIG_MTD_DEBUG is not set - # CONFIG_MTD_CONCAT is not set -@@ -319,11 +401,14 @@ - # User Modules And Translation Layers - # - CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y - CONFIG_MTD_BLOCK=y - # CONFIG_FTL is not set - # CONFIG_NFTL is not set - # CONFIG_INFTL is not set - # CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set - - # - # RAM/ROM/Flash chip drivers -@@ -349,15 +434,14 @@ - # CONFIG_MTD_RAM is not set - # CONFIG_MTD_ROM is not set - # CONFIG_MTD_ABSENT is not set --# CONFIG_MTD_XIP is not set - - # - # Mapping drivers for chip access - # - # CONFIG_MTD_COMPLEX_MAPPINGS is not set - CONFIG_MTD_PHYSMAP=y --CONFIG_MTD_PHYSMAP_START=0 --CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_START=0x0 -+CONFIG_MTD_PHYSMAP_LEN=0x0 - CONFIG_MTD_PHYSMAP_BANKWIDTH=0 - # CONFIG_MTD_ARM_INTEGRATOR is not set - # CONFIG_MTD_PLATRAM is not set -@@ -368,7 +452,6 @@ - # CONFIG_MTD_SLRAM is not set - # CONFIG_MTD_PHRAM is not set - # CONFIG_MTD_MTDRAM is not set --# CONFIG_MTD_BLKMTD is not set - # CONFIG_MTD_BLOCK2MTD is not set - - # -@@ -378,29 +461,15 @@ - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOC2001PLUS is not set - # CONFIG_MTD_AT91_DATAFLASH is not set -- --# --# NAND Flash Device Drivers --# - # CONFIG_MTD_NAND is not set -- --# --# OneNAND Flash Device Drivers --# - # CONFIG_MTD_ONENAND is not set - - # --# Parallel port support -+# UBI - Unsorted block images - # -+# CONFIG_MTD_UBI is not set - # CONFIG_PARPORT is not set -- --# --# Plug and Play support --# -- --# --# Block devices --# -+CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=y - # CONFIG_BLK_DEV_CRYPTOLOOP is not set -@@ -409,13 +478,12 @@ - CONFIG_BLK_DEV_RAM=y - CONFIG_BLK_DEV_RAM_COUNT=16 - CONFIG_BLK_DEV_RAM_SIZE=8192 --CONFIG_BLK_DEV_INITRD=y -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 - # CONFIG_CDROM_PKTCDVD is not set - # CONFIG_ATA_OVER_ETH is not set -- --# --# ATA/ATAPI/MFM/RLL support --# -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=y - # CONFIG_IDE is not set - - # -@@ -423,6 +491,9 @@ - # - # CONFIG_RAID_ATTRS is not set - CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set - CONFIG_SCSI_PROC_FS=y - - # -@@ -441,97 +512,61 @@ - # CONFIG_SCSI_MULTI_LUN is not set - # CONFIG_SCSI_CONSTANTS is not set - # CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m - - # --# SCSI Transport Attributes -+# SCSI Transports - # - # CONFIG_SCSI_SPI_ATTRS is not set - # CONFIG_SCSI_FC_ATTRS is not set - # CONFIG_SCSI_ISCSI_ATTRS is not set --# CONFIG_SCSI_SAS_ATTRS is not set -- --# --# SCSI low-level drivers --# -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y - # CONFIG_ISCSI_TCP is not set --# CONFIG_SCSI_SATA is not set - # CONFIG_SCSI_DEBUG is not set -- --# --# PCMCIA SCSI adapter support --# --# CONFIG_PCMCIA_AHA152X is not set --# CONFIG_PCMCIA_FDOMAIN is not set --# CONFIG_PCMCIA_NINJA_SCSI is not set --# CONFIG_PCMCIA_QLOGIC is not set --# CONFIG_PCMCIA_SYM53C500 is not set -- --# --# Multi-device support (RAID and LVM) --# -+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -+# CONFIG_ATA is not set - # CONFIG_MD is not set -- --# --# Fusion MPT device support --# --# CONFIG_FUSION is not set -- --# --# IEEE 1394 (FireWire) support --# -- --# --# I2O device support --# -- --# --# Network device support --# - CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set - # CONFIG_DUMMY is not set - # CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set - # CONFIG_TUN is not set -- --# --# PHY device support --# -+# CONFIG_VETH is not set - # CONFIG_PHYLIB is not set -- --# --# Ethernet (10 or 100Mbit) --# - CONFIG_NET_ETHERNET=y - CONFIG_MII=y - CONFIG_ARM_AT91_ETHER=y -+# CONFIG_AX88796 is not set - # CONFIG_SMC91X is not set - # CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+CONFIG_NETDEV_1000=y -+CONFIG_NETDEV_10000=y - - # --# Ethernet (1000 Mbit) --# -- --# --# Ethernet (10000 Mbit) --# -- --# --# Token Ring devices -+# Wireless LAN - # -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set - - # --# Wireless LAN (non-hamradio) --# --# CONFIG_NET_RADIO is not set -- --# --# PCMCIA network device support -+# USB Network Adapters - # -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set - # CONFIG_NET_PCMCIA is not set -- --# --# Wan interfaces --# - # CONFIG_WAN is not set - # CONFIG_PPP is not set - # CONFIG_SLIP is not set -@@ -539,26 +574,23 @@ - # CONFIG_NETCONSOLE is not set - # CONFIG_NETPOLL is not set - # CONFIG_NET_POLL_CONTROLLER is not set -- --# --# ISDN subsystem --# - # CONFIG_ISDN is not set - - # - # Input device support - # - CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set - - # - # Userland interfaces - # - CONFIG_INPUT_MOUSEDEV=y --CONFIG_INPUT_MOUSEDEV_PSAUX=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set - CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 - CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 - # CONFIG_INPUT_JOYDEV is not set --# CONFIG_INPUT_TSDEV is not set - # CONFIG_INPUT_EVDEV is not set - # CONFIG_INPUT_EVBUG is not set - -@@ -568,6 +600,7 @@ - # CONFIG_INPUT_KEYBOARD is not set - # CONFIG_INPUT_MOUSE is not set - # CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set - # CONFIG_INPUT_TOUCHSCREEN is not set - # CONFIG_INPUT_MISC is not set - -@@ -583,6 +616,7 @@ - CONFIG_VT=y - CONFIG_VT_CONSOLE=y - CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set - # CONFIG_SERIAL_NONSTANDARD is not set - - # -@@ -601,152 +635,114 @@ - CONFIG_UNIX98_PTYS=y - CONFIG_LEGACY_PTYS=y - CONFIG_LEGACY_PTY_COUNT=256 -- --# --# IPMI --# - # CONFIG_IPMI_HANDLER is not set -- --# --# Watchdog Cards --# --CONFIG_WATCHDOG=y --CONFIG_WATCHDOG_NOWAYOUT=y -- --# --# Watchdog Device Drivers --# --# CONFIG_SOFT_WATCHDOG is not set --CONFIG_AT91RM9200_WATCHDOG=y -- --# --# USB-based Watchdog Cards --# --# CONFIG_USBPCWATCHDOG is not set - # CONFIG_HW_RANDOM is not set - # CONFIG_NVRAM is not set --# CONFIG_DTLK is not set - # CONFIG_R3964 is not set - - # --# Ftape, the floppy tape device driver --# -- --# - # PCMCIA character devices - # - # CONFIG_SYNCLINK_CS is not set - # CONFIG_CARDMAN_4000 is not set - # CONFIG_CARDMAN_4040 is not set - # CONFIG_RAW_DRIVER is not set -- --# --# TPM devices --# - # CONFIG_TCG_TPM is not set --# CONFIG_TELCLOCK is not set - CONFIG_AT91_SPI=y - CONFIG_AT91_SPIDEV=y -- --# --# I2C support --# - CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=y - - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y -+# CONFIG_I2C_OCORES is not set - # CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set - # CONFIG_I2C_STUB is not set --# CONFIG_I2C_PCA_ISA is not set -+# CONFIG_I2C_TINY_USB is not set -+# CONFIG_I2C_PCA is not set - - # - # Miscellaneous I2C Chip support - # - # CONFIG_SENSORS_DS1337 is not set - # CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set - # CONFIG_SENSORS_EEPROM is not set - # CONFIG_SENSORS_PCF8574 is not set - # CONFIG_SENSORS_PCA9539 is not set - # CONFIG_SENSORS_PCF8591 is not set --# CONFIG_SENSORS_RTC8564 is not set - # CONFIG_SENSORS_MAX6875 is not set --# CONFIG_RTC_X1205_I2C is not set -+# CONFIG_SENSORS_TSL2550 is not set - # CONFIG_I2C_DEBUG_CORE is not set - # CONFIG_I2C_DEBUG_ALGO is not set - # CONFIG_I2C_DEBUG_BUS is not set - # CONFIG_I2C_DEBUG_CHIP is not set - - # --# Hardware Monitoring support -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_SPI_MASTER is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y -+ -+# -+# Watchdog Device Drivers - # --CONFIG_HWMON=y --# CONFIG_HWMON_VID is not set --# CONFIG_SENSORS_ADM1021 is not set --# CONFIG_SENSORS_ADM1025 is not set --# CONFIG_SENSORS_ADM1026 is not set --# CONFIG_SENSORS_ADM1031 is not set --# CONFIG_SENSORS_ADM9240 is not set --# CONFIG_SENSORS_ASB100 is not set --# CONFIG_SENSORS_ATXP1 is not set --# CONFIG_SENSORS_DS1621 is not set --# CONFIG_SENSORS_FSCHER is not set --# CONFIG_SENSORS_FSCPOS is not set --# CONFIG_SENSORS_GL518SM is not set --# CONFIG_SENSORS_GL520SM is not set --# CONFIG_SENSORS_IT87 is not set --# CONFIG_SENSORS_LM63 is not set --# CONFIG_SENSORS_LM75 is not set --# CONFIG_SENSORS_LM77 is not set --# CONFIG_SENSORS_LM78 is not set --# CONFIG_SENSORS_LM80 is not set --# CONFIG_SENSORS_LM83 is not set --# CONFIG_SENSORS_LM85 is not set --# CONFIG_SENSORS_LM87 is not set --# CONFIG_SENSORS_LM90 is not set --# CONFIG_SENSORS_LM92 is not set --# CONFIG_SENSORS_MAX1619 is not set --# CONFIG_SENSORS_PC87360 is not set --# CONFIG_SENSORS_SMSC47M1 is not set --# CONFIG_SENSORS_SMSC47B397 is not set --# CONFIG_SENSORS_W83781D is not set --# CONFIG_SENSORS_W83792D is not set --# CONFIG_SENSORS_W83L785TS is not set --# CONFIG_SENSORS_W83627HF is not set --# CONFIG_SENSORS_W83627EHF is not set --# CONFIG_HWMON_DEBUG_CHIP is not set -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT91RM9200_WATCHDOG=y - - # --# Misc devices -+# USB-based Watchdog Cards - # -+# CONFIG_USBPCWATCHDOG is not set - - # --# Multimedia Capabilities Port drivers -+# Sonics Silicon Backplane - # -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set - - # --# Multimedia devices -+# Multifunction device drivers - # --# CONFIG_VIDEO_DEV is not set -+# CONFIG_MFD_SM501 is not set - - # --# Digital Video Broadcasting Devices -+# Multimedia devices - # --# CONFIG_DVB is not set -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set - - # - # Graphics support - # -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set - # CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set - - # - # Console display driver support -@@ -758,12 +754,25 @@ - # Sound - # - # CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+# CONFIG_HIDRAW is not set - - # --# USB support -+# USB Input Devices - # -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+CONFIG_USB_SUPPORT=y - CONFIG_USB_ARCH_HAS_HCD=y - CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set - CONFIG_USB=y - CONFIG_USB_DEBUG=y - -@@ -771,7 +780,7 @@ - # Miscellaneous USB options - # - CONFIG_USB_DEVICEFS=y --# CONFIG_USB_BANDWIDTH is not set -+CONFIG_USB_DEVICE_CLASS=y - # CONFIG_USB_DYNAMIC_MINORS is not set - # CONFIG_USB_OTG is not set - -@@ -780,9 +789,11 @@ - # - # CONFIG_USB_ISP116X_HCD is not set - CONFIG_USB_OHCI_HCD=y --# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set - CONFIG_USB_OHCI_LITTLE_ENDIAN=y - # CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set - - # - # USB Device Class drivers -@@ -801,59 +812,21 @@ - # CONFIG_USB_STORAGE_DEBUG is not set - # CONFIG_USB_STORAGE_DATAFAB is not set - # CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set - # CONFIG_USB_STORAGE_DPCM is not set - # CONFIG_USB_STORAGE_USBAT is not set - # CONFIG_USB_STORAGE_SDDR09 is not set - # CONFIG_USB_STORAGE_SDDR55 is not set - # CONFIG_USB_STORAGE_JUMPSHOT is not set -- --# --# USB Input Devices --# --# CONFIG_USB_HID is not set -- --# --# USB HID Boot Protocol drivers --# --# CONFIG_USB_KBD is not set --# CONFIG_USB_MOUSE is not set --# CONFIG_USB_AIPTEK is not set --# CONFIG_USB_WACOM is not set --# CONFIG_USB_ACECAD is not set --# CONFIG_USB_KBTAB is not set --# CONFIG_USB_POWERMATE is not set --# CONFIG_USB_MTOUCH is not set --# CONFIG_USB_ITMTOUCH is not set --# CONFIG_USB_EGALAX is not set --# CONFIG_USB_YEALINK is not set --# CONFIG_USB_XPAD is not set --# CONFIG_USB_ATI_REMOTE is not set --# CONFIG_USB_KEYSPAN_REMOTE is not set --# CONFIG_USB_APPLETOUCH is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set - - # - # USB Imaging devices - # - # CONFIG_USB_MDC800 is not set - # CONFIG_USB_MICROTEK is not set -- --# --# USB Multimedia devices --# --# CONFIG_USB_DABUSB is not set -- --# --# Video4Linux support is needed for USB Multimedia device support --# -- --# --# USB Network Adapters --# --# CONFIG_USB_CATC is not set --# CONFIG_USB_KAWETH is not set --# CONFIG_USB_PEGASUS is not set --# CONFIG_USB_RTL8150 is not set --# CONFIG_USB_USBNET is not set - CONFIG_USB_MON=y - - # -@@ -866,15 +839,18 @@ - CONFIG_USB_SERIAL=y - CONFIG_USB_SERIAL_CONSOLE=y - CONFIG_USB_SERIAL_GENERIC=y -+# CONFIG_USB_SERIAL_AIRCABLE is not set - # CONFIG_USB_SERIAL_AIRPRIME is not set --# CONFIG_USB_SERIAL_ANYDATA is not set -+# CONFIG_USB_SERIAL_ARK3116 is not set - # CONFIG_USB_SERIAL_BELKIN is not set -+# CONFIG_USB_SERIAL_CH341 is not set - # CONFIG_USB_SERIAL_WHITEHEAT is not set - # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set - # CONFIG_USB_SERIAL_CP2101 is not set - # CONFIG_USB_SERIAL_CYPRESS_M8 is not set - # CONFIG_USB_SERIAL_EMPEG is not set - CONFIG_USB_SERIAL_FTDI_SIO=y -+# CONFIG_USB_SERIAL_FUNSOFT is not set - # CONFIG_USB_SERIAL_VISOR is not set - # CONFIG_USB_SERIAL_IPAQ is not set - # CONFIG_USB_SERIAL_IR is not set -@@ -899,14 +875,20 @@ - # CONFIG_USB_SERIAL_KLSI is not set - # CONFIG_USB_SERIAL_KOBIL_SCT is not set - CONFIG_USB_SERIAL_MCT_U232=y -+# CONFIG_USB_SERIAL_MOS7720 is not set -+# CONFIG_USB_SERIAL_MOS7840 is not set -+# CONFIG_USB_SERIAL_NAVMAN is not set - # CONFIG_USB_SERIAL_PL2303 is not set -+# CONFIG_USB_SERIAL_OTI6858 is not set - # CONFIG_USB_SERIAL_HP4X is not set - # CONFIG_USB_SERIAL_SAFE is not set -+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set - # CONFIG_USB_SERIAL_TI is not set - # CONFIG_USB_SERIAL_CYBERJACK is not set - # CONFIG_USB_SERIAL_XIRCOM is not set - # CONFIG_USB_SERIAL_OPTION is not set - # CONFIG_USB_SERIAL_OMNINET is not set -+# CONFIG_USB_SERIAL_DEBUG is not set - CONFIG_USB_EZUSB=y - - # -@@ -914,16 +896,22 @@ - # - # CONFIG_USB_EMI62 is not set - # CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set - # CONFIG_USB_AUERSWALD is not set - # CONFIG_USB_RIO500 is not set - # CONFIG_USB_LEGOTOWER is not set - # CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set - # CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set - # CONFIG_USB_CYTHERM is not set --# CONFIG_USB_PHIDGETKIT is not set --# CONFIG_USB_PHIDGETSERVO is not set -+# CONFIG_USB_PHIDGET is not set - # CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set - # CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set - # CONFIG_USB_TEST is not set - - # -@@ -934,13 +922,19 @@ - # USB Gadget Support - # - CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set - CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set - # CONFIG_USB_GADGET_NET2280 is not set - # CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set - # CONFIG_USB_GADGET_GOKU is not set - # CONFIG_USB_GADGET_LH7A40X is not set - # CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set - CONFIG_USB_GADGET_AT91=y - CONFIG_USB_AT91=y - # CONFIG_USB_GADGET_DUMMY_HCD is not set -@@ -950,22 +944,28 @@ - # CONFIG_USB_GADGETFS is not set - # CONFIG_USB_FILE_STORAGE is not set - # CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set - - # --# MMC/SD Card support -+# MMC/SD Card Drivers - # --CONFIG_MMC=y --# CONFIG_MMC_DEBUG is not set - CONFIG_MMC_BLOCK=y --CONFIG_MMC_AT91RM9200=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set - - # --# Real Time Clock -+# MMC/SD Host Controller Drivers - # -+# CONFIG_MMC_AT91 is not set -+# CONFIG_NEW_LEDS is not set - CONFIG_RTC_LIB=y - CONFIG_RTC_CLASS=y - CONFIG_RTC_HCTOSYS=y - CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -+# CONFIG_RTC_DEBUG is not set - - # - # RTC interfaces -@@ -974,39 +974,60 @@ - CONFIG_RTC_INTF_PROC=y - CONFIG_RTC_INTF_DEV=y - # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set - - # --# RTC drivers -+# I2C RTC drivers - # --# CONFIG_RTC_DRV_X1205 is not set - CONFIG_RTC_DRV_DS1307=y --# CONFIG_RTC_DRV_DS1553 is not set --# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_DS1374 is not set - # CONFIG_RTC_DRV_DS1672 is not set --# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set - # CONFIG_RTC_DRV_PCF8563 is not set - # CONFIG_RTC_DRV_PCF8583 is not set --# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set - # CONFIG_RTC_DRV_M48T86 is not set --CONFIG_RTC_DRV_AT91RM9200=y --# CONFIG_RTC_DRV_TEST is not set -+# CONFIG_RTC_DRV_M48T59 is not set - # CONFIG_RTC_DRV_V3020 is not set - - # -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT91RM9200=y -+ -+# - # File systems - # - CONFIG_EXT2_FS=y - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set - # CONFIG_EXT3_FS is not set --# CONFIG_JBD is not set -+# CONFIG_EXT4DEV_FS is not set - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set - # CONFIG_FS_POSIX_ACL is not set - # CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set - # CONFIG_MINIX_FS is not set - # CONFIG_ROMFS_FS is not set - CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y - # CONFIG_QUOTA is not set - CONFIG_DNOTIFY=y - # CONFIG_AUTOFS_FS is not set -@@ -1030,11 +1051,12 @@ - # Pseudo filesystems - # - CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y - CONFIG_SYSFS=y - CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_RAMFS=y --# CONFIG_RELAYFS_FS is not set -+# CONFIG_CONFIGFS_FS is not set - - # - # Miscellaneous filesystems -@@ -1046,7 +1068,6 @@ - # CONFIG_BEFS_FS is not set - # CONFIG_BFS_FS is not set - # CONFIG_EFS_FS is not set --# CONFIG_JFFS_FS is not set - # CONFIG_JFFS2_FS is not set - CONFIG_CRAMFS=y - # CONFIG_VXFS_FS is not set -@@ -1054,10 +1075,7 @@ - # CONFIG_QNX4FS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -- --# --# Network File Systems --# -+CONFIG_NETWORK_FILESYSTEMS=y - CONFIG_NFS_FS=y - CONFIG_NFS_V3=y - # CONFIG_NFS_V3_ACL is not set -@@ -1070,6 +1088,7 @@ - CONFIG_NFS_COMMON=y - CONFIG_SUNRPC=y - CONFIG_SUNRPC_GSS=y -+# CONFIG_SUNRPC_BIND34 is not set - CONFIG_RPCSEC_GSS_KRB5=y - # CONFIG_RPCSEC_GSS_SPKM3 is not set - # CONFIG_SMB_FS is not set -@@ -1077,43 +1096,56 @@ - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set - # CONFIG_AFS_FS is not set --# CONFIG_9P_FS is not set - - # - # Partition Types - # - # CONFIG_PARTITION_ADVANCED is not set - CONFIG_MSDOS_PARTITION=y -- --# --# Native Language Support --# - # CONFIG_NLS is not set -- --# --# Profiling support --# -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y - # CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set - - # - # Kernel hacking - # - # CONFIG_PRINTK_TIME is not set --CONFIG_DEBUG_KERNEL=y -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y - # CONFIG_MAGIC_SYSRQ is not set --CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set - CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set --# CONFIG_DEBUG_SLAB is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set - # CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set - CONFIG_DEBUG_BUGVERBOSE=y - # CONFIG_DEBUG_INFO is not set --# CONFIG_DEBUG_FS is not set - # CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set - CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set - CONFIG_DEBUG_USER=y - # CONFIG_DEBUG_ERRORS is not set - CONFIG_DEBUG_LL=y -@@ -1124,12 +1156,13 @@ - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -- --# --# Cryptographic options --# -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set - CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_MANAGER=y - # CONFIG_CRYPTO_HMAC is not set -+# CONFIG_CRYPTO_XCBC is not set - # CONFIG_CRYPTO_NULL is not set - # CONFIG_CRYPTO_MD4 is not set - CONFIG_CRYPTO_MD5=y -@@ -1138,7 +1171,15 @@ - # CONFIG_CRYPTO_SHA512 is not set - # CONFIG_CRYPTO_WP512 is not set - # CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_ECB is not set -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CRYPTD is not set - CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set - # CONFIG_CRYPTO_BLOWFISH is not set - # CONFIG_CRYPTO_TWOFISH is not set - # CONFIG_CRYPTO_SERPENT is not set -@@ -1149,20 +1190,27 @@ - # CONFIG_CRYPTO_ARC4 is not set - # CONFIG_CRYPTO_KHAZAD is not set - # CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_SEED is not set - # CONFIG_CRYPTO_DEFLATE is not set - # CONFIG_CRYPTO_MICHAEL_MIC is not set - # CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set - # CONFIG_CRYPTO_TEST is not set -- --# --# Hardware crypto devices --# -+# CONFIG_CRYPTO_AUTHENC is not set -+CONFIG_CRYPTO_HW=y - - # - # Library routines - # -+CONFIG_BITREVERSE=y - # CONFIG_CRC_CCITT is not set - # CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set - CONFIG_CRC32=y -+# CONFIG_CRC7 is not set - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb637_defconfig linux-2.6/arch/arm/configs/csb637_defconfig ---- linux-2.6.24/arch/arm/configs/csb637_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/csb637_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -658,14 +658,14 @@ - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_STUB is not set - # CONFIG_I2C_PCA_ISA is not set -diff -urN -x CVS linux-2.6.24/arch/arm/configs/ecbat91_defconfig linux-2.6/arch/arm/configs/ecbat91_defconfig ---- linux-2.6.24/arch/arm/configs/ecbat91_defconfig 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/configs/ecbat91_defconfig 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,1315 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.22-rc4 -+# Sat Jun 9 01:30:18 2007 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+# CONFIG_IPC_NS is not set -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_UTS_NS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=14 -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+# CONFIG_BLK_DEV_INITRD is not set -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# Block layer -+# -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+# CONFIG_IOSCHED_DEADLINE is not set -+# CONFIG_IOSCHED_CFQ is not set -+CONFIG_DEFAULT_AS=y -+# CONFIG_DEFAULT_DEADLINE is not set -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="anticipatory" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Atmel AT91 System-on-Chip -+# -+CONFIG_ARCH_AT91RM9200=y -+# CONFIG_ARCH_AT91SAM9260 is not set -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+ -+# -+# AT91RM9200 Board Type -+# -+# CONFIG_MACH_ONEARM is not set -+# CONFIG_ARCH_AT91RM9200DK is not set -+# CONFIG_MACH_AT91RM9200EK is not set -+# CONFIG_MACH_CSB337 is not set -+# CONFIG_MACH_CSB637 is not set -+# CONFIG_MACH_CARMEVA is not set -+# CONFIG_MACH_ATEB9200 is not set -+# CONFIG_MACH_KB9200 is not set -+# CONFIG_MACH_PICOTUX2XX is not set -+# CONFIG_MACH_KAFA is not set -+# CONFIG_MACH_CHUB is not set -+CONFIG_MACH_ECBAT91=y -+ -+# -+# AT91 Board Options -+# -+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set -+ -+# -+# AT91 Feature Selections -+# -+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -+# CONFIG_ATMEL_TCLIB is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+CONFIG_PCCARD=y -+# CONFIG_PCMCIA_DEBUG is not set -+CONFIG_PCMCIA=y -+CONFIG_PCMCIA_LOAD_CIS=y -+CONFIG_PCMCIA_IOCTL=y -+ -+# -+# PC-card bridges -+# -+CONFIG_AT91_CF=y -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+CONFIG_PREEMPT=y -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_LEDS=y -+CONFIG_LEDS_TIMER=y -+CONFIG_LEDS_CPU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+CONFIG_CFG80211=y -+CONFIG_WIRELESS_EXT=y -+CONFIG_MAC80211=y -+# CONFIG_MAC80211_DEBUG is not set -+CONFIG_IEEE80211=y -+# CONFIG_IEEE80211_DEBUG is not set -+CONFIG_IEEE80211_CRYPT_WEP=y -+# CONFIG_IEEE80211_CRYPT_CCMP is not set -+# CONFIG_IEEE80211_CRYPT_TKIP is not set -+CONFIG_IEEE80211_SOFTMAC=y -+CONFIG_IEEE80211_SOFTMAC_DEBUG=y -+# CONFIG_RFKILL is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+# CONFIG_STANDALONE is not set -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+CONFIG_FW_LOADER=y -+# CONFIG_SYS_HYPERVISOR is not set -+ -+# -+# Connector - unified userspace <-> kernelspace linker -+# -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+CONFIG_MTD_AFS_PARTS=y -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=y -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+# CONFIG_PNPACPI is not set -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+# CONFIG_BLK_DEV_RAM is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+CONFIG_CHR_DEV_SG=y -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# PCMCIA SCSI adapter support -+# -+# CONFIG_PCMCIA_AHA152X is not set -+# CONFIG_PCMCIA_FDOMAIN is not set -+# CONFIG_PCMCIA_NINJA_SCSI is not set -+# CONFIG_PCMCIA_QLOGIC is not set -+# CONFIG_PCMCIA_SYM53C500 is not set -+# CONFIG_ATA is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_PHYLIB is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_ARM_AT91_ETHER=y -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_NET_PCMCIA is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=y -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=y -+# CONFIG_PPP_SYNC_TTY is not set -+# CONFIG_PPP_DEFLATE is not set -+# CONFIG_PPP_BSDCOMP is not set -+# CONFIG_PPP_MPPE is not set -+# CONFIG_PPPOE is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=y -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+# CONFIG_AT91RM9200_WATCHDOG is not set -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+ -+# -+# PCMCIA character devices -+# -+# CONFIG_SYNCLINK_CS is not set -+# CONFIG_CARDMAN_4000 is not set -+# CONFIG_CARDMAN_4040 is not set -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+# CONFIG_AT91_SPI is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+CONFIG_I2C_ALGOBIT=y -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_GPIO=y -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+# CONFIG_I2C_PCA is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+# CONFIG_SPI_ATMEL is not set -+CONFIG_SPI_BITBANG=y -+CONFIG_SPI_AT91=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_ABITUGURU is not set -+# CONFIG_SENSORS_AD7418 is not set -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1029 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ADM9240 is not set -+# CONFIG_SENSORS_ASB100 is not set -+# CONFIG_SENSORS_ATXP1 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_FSCHER is not set -+# CONFIG_SENSORS_FSCPOS is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM70 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_MAX6650 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_SMSC47M192 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_VT1211 is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83791D is not set -+# CONFIG_SENSORS_W83792D is not set -+# CONFIG_SENSORS_W83793 is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83627HF is not set -+# CONFIG_SENSORS_W83627EHF is not set -+# CONFIG_HWMON_DEBUG_CHIP is not set -+ -+# -+# Misc devices -+# -+# CONFIG_BLINK is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# LED devices -+# -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+ -+# -+# LED Triggers -+# -+# CONFIG_LEDS_TRIGGERS is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+ -+# -+# HID Devices -+# -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_DEVICE_CLASS is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+CONFIG_USB_PRINTER=y -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_AT91=y -+CONFIG_USB_AT91=y -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+# CONFIG_USB_ETH is not set -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+CONFIG_MMC_DEBUG=y -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_AT91=y -+ -+# -+# Real Time Clock -+# -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+# CONFIG_RTC_HCTOSYS is not set -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT91RM9200=y -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+# CONFIG_EXT3_FS_POSIX_ACL is not set -+# CONFIG_EXT3_FS_SECURITY is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FS_MBCACHE=y -+CONFIG_REISERFS_FS=y -+# CONFIG_REISERFS_CHECK is not set -+# CONFIG_REISERFS_PROC_INFO is not set -+# CONFIG_REISERFS_FS_XATTR is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+# CONFIG_MSDOS_FS is not set -+# CONFIG_VFAT_FS is not set -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS2_FS is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_ACL_SUPPORT=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+CONFIG_SUNRPC_GSS=y -+# CONFIG_SUNRPC_BIND34 is not set -+CONFIG_RPCSEC_GSS_KRB5=y -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+# CONFIG_9P_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+# CONFIG_NLS_CODEPAGE_437 is not set -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+# CONFIG_NLS_ISO8859_1 is not set -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Distributed Lock Manager -+# -+# CONFIG_DLM is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_MUST_CHECK=y -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+# CONFIG_DEBUG_KERNEL is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_FRAME_POINTER=y -+CONFIG_DEBUG_USER=y -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_MANAGER=y -+# CONFIG_CRYPTO_HMAC is not set -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+CONFIG_CRYPTO_ECB=y -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=y -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+CONFIG_CRYPTO_AES=y -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+CONFIG_CRYPTO_ARC4=y -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Hardware crypto devices -+# -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/homematic_defconfig linux-2.6/arch/arm/configs/homematic_defconfig ---- linux-2.6.24/arch/arm/configs/homematic_defconfig 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/configs/homematic_defconfig 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,1263 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.21.3 -+# Mon Jun 18 12:28:42 2007 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+# CONFIG_SWAP is not set -+CONFIG_SYSVIPC=y -+# CONFIG_IPC_NS is not set -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_UTS_NS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+# CONFIG_SYSFS_DEPRECATED is not set -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+CONFIG_SHMEM=y -+CONFIG_SLAB=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+# CONFIG_SLOB is not set -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# Block layer -+# -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+CONFIG_IOSCHED_DEADLINE=y -+# CONFIG_IOSCHED_CFQ is not set -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Atmel AT91 System-on-Chip -+# -+CONFIG_ARCH_AT91RM9200=y -+# CONFIG_ARCH_AT91SAM9260 is not set -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+ -+# -+# AT91RM9200 Board Type -+# -+# CONFIG_MACH_ONEARM is not set -+# CONFIG_ARCH_AT91RM9200DK is not set -+# CONFIG_MACH_AT91RM9200EK is not set -+# CONFIG_MACH_CSB337 is not set -+# CONFIG_MACH_CSB637 is not set -+# CONFIG_MACH_CARMEVA is not set -+# CONFIG_MACH_ATEB9200 is not set -+# CONFIG_MACH_KB9200 is not set -+# CONFIG_MACH_KAFA is not set -+# CONFIG_MACH_CHUB is not set -+CONFIG_MACH_HOMEMATIC=y -+ -+# -+# AT91 Board Options -+# -+ -+# -+# AT91 Feature Selections -+# -+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+# CONFIG_ATMEL_TCLIB is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_PREEMPT is not set -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+# CONFIG_LEDS is not set -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+# CONFIG_NETDEBUG is not set -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+ -+# -+# DCCP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_DCCP is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+ -+# -+# TIPC Configuration (EXPERIMENTAL) -+# -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+CONFIG_IEEE80211=m -+# CONFIG_IEEE80211_DEBUG is not set -+CONFIG_IEEE80211_CRYPT_WEP=m -+CONFIG_IEEE80211_CRYPT_CCMP=m -+CONFIG_IEEE80211_CRYPT_TKIP=m -+CONFIG_IEEE80211_SOFTMAC=m -+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -+CONFIG_WIRELESS_EXT=y -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_SYS_HYPERVISOR is not set -+ -+# -+# Connector - unified userspace <-> kernelspace linker -+# -+# CONFIG_CONNECTOR is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+# CONFIG_MTD_OBSOLETE_CHIPS is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_AT91_DATAFLASH=y -+ -+# -+# NAND Flash Device Drivers -+# -+CONFIG_MTD_NAND=y -+# CONFIG_MTD_NAND_VERIFY_WRITE is not set -+# CONFIG_MTD_NAND_ECC_SMC is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_AT91=y -+# CONFIG_MTD_NAND_NANDSIM is not set -+ -+# -+# OneNAND Flash Device Drivers -+# -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+# CONFIG_PNPACPI is not set -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_COW_COMMON is not set -+# CONFIG_BLK_DEV_LOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_SCSI_PROC_FS is not set -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Serial ATA (prod) and Parallel ATA (experimental) drivers -+# -+# CONFIG_ATA is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+ -+# -+# I2O device support -+# -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+ -+# -+# PHY device support -+# -+# CONFIG_PHYLIB is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_ARM_AT91_ETHER=y -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+ -+# -+# Ethernet (10000 Mbit) -+# -+ -+# -+# Token Ring devices -+# -+ -+# -+# Wireless LAN (non-hamradio) -+# -+CONFIG_NET_RADIO=y -+# CONFIG_NET_WIRELESS_RTNETLINK is not set -+ -+# -+# Obsolete Wireless cards support (pre-802.11) -+# -+# CONFIG_STRIP is not set -+# CONFIG_USB_ZD1201 is not set -+# CONFIG_HOSTAP is not set -+CONFIG_ZD1211RW=m -+# CONFIG_ZD1211RW_DEBUG is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+CONFIG_KEYBOARD_ATKBD=y -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_KEYBOARD_GPIO is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+CONFIG_SERIO_LIBPS2=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+CONFIG_WATCHDOG=y -+CONFIG_WATCHDOG_NOWAYOUT=y -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT91RM9200_WATCHDOG=y -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+CONFIG_AT91_SPI=y -+# CONFIG_AT91_SPIDEV is not set -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=m -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_AT91 is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_PCA is not set -+# CONFIG_I2C_PCA_ISA is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_SPI_MASTER is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+ -+# -+# Hardware Monitoring support -+# -+# CONFIG_HWMON is not set -+# CONFIG_HWMON_VID is not set -+ -+# -+# Misc devices -+# -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# LED devices -+# -+# CONFIG_NEW_LEDS is not set -+ -+# -+# LED drivers -+# -+ -+# -+# LED Triggers -+# -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+ -+# -+# HID Devices -+# -+# CONFIG_HID is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+# CONFIG_USB_AIPTEK is not set -+# CONFIG_USB_WACOM is not set -+# CONFIG_USB_ACECAD is not set -+# CONFIG_USB_KBTAB is not set -+# CONFIG_USB_POWERMATE is not set -+# CONFIG_USB_TOUCHSCREEN is not set -+# CONFIG_USB_YEALINK is not set -+# CONFIG_USB_XPAD is not set -+# CONFIG_USB_ATI_REMOTE is not set -+# CONFIG_USB_ATI_REMOTE2 is not set -+# CONFIG_USB_KEYSPAN_REMOTE is not set -+# CONFIG_USB_APPLETOUCH is not set -+# CONFIG_USB_GTCO is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=m -+# CONFIG_USB_SERIAL_GENERIC is not set -+# CONFIG_USB_SERIAL_AIRCABLE is not set -+# CONFIG_USB_SERIAL_AIRPRIME is not set -+# CONFIG_USB_SERIAL_ARK3116 is not set -+# CONFIG_USB_SERIAL_BELKIN is not set -+# CONFIG_USB_SERIAL_WHITEHEAT is not set -+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -+# CONFIG_USB_SERIAL_CP2101 is not set -+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -+# CONFIG_USB_SERIAL_EMPEG is not set -+CONFIG_USB_SERIAL_FTDI_SIO=m -+# CONFIG_USB_SERIAL_FUNSOFT is not set -+# CONFIG_USB_SERIAL_VISOR is not set -+# CONFIG_USB_SERIAL_IPAQ is not set -+# CONFIG_USB_SERIAL_IR is not set -+# CONFIG_USB_SERIAL_EDGEPORT is not set -+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -+# CONFIG_USB_SERIAL_GARMIN is not set -+# CONFIG_USB_SERIAL_IPW is not set -+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -+# CONFIG_USB_SERIAL_KEYSPAN is not set -+# CONFIG_USB_SERIAL_KLSI is not set -+# CONFIG_USB_SERIAL_KOBIL_SCT is not set -+# CONFIG_USB_SERIAL_MCT_U232 is not set -+# CONFIG_USB_SERIAL_MOS7720 is not set -+# CONFIG_USB_SERIAL_MOS7840 is not set -+# CONFIG_USB_SERIAL_NAVMAN is not set -+# CONFIG_USB_SERIAL_PL2303 is not set -+# CONFIG_USB_SERIAL_HP4X is not set -+# CONFIG_USB_SERIAL_SAFE is not set -+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -+# CONFIG_USB_SERIAL_TI is not set -+# CONFIG_USB_SERIAL_CYBERJACK is not set -+# CONFIG_USB_SERIAL_XIRCOM is not set -+# CONFIG_USB_SERIAL_OPTION is not set -+# CONFIG_USB_SERIAL_OMNINET is not set -+# CONFIG_USB_SERIAL_DEBUG is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=m -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_AT91=y -+CONFIG_USB_AT91=m -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+CONFIG_USB_FILE_STORAGE_TEST=y -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+ -+# -+# MMC/SD Card support -+# -+# CONFIG_MMC is not set -+ -+# -+# Real Time Clock -+# -+CONFIG_RTC_LIB=y -+# CONFIG_RTC_CLASS is not set -+ -+# -+# File systems -+# -+# CONFIG_EXT2_FS is not set -+# CONFIG_EXT3_FS is not set -+# CONFIG_EXT4DEV_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_MINIX_FS=y -+# CONFIG_ROMFS_FS is not set -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_YAFFS_FS=y -+CONFIG_YAFFS_YAFFS1=y -+# CONFIG_YAFFS_DOES_ECC is not set -+CONFIG_YAFFS_YAFFS2=y -+CONFIG_YAFFS_AUTO_YAFFS2=y -+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+# CONFIG_9P_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Distributed Lock Manager -+# -+# CONFIG_DLM is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_MUST_CHECK=y -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+# CONFIG_DEBUG_KERNEL is not set -+CONFIG_LOG_BUF_SHIFT=14 -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_FRAME_POINTER=y -+# CONFIG_DEBUG_USER is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_MANAGER=m -+# CONFIG_CRYPTO_HMAC is not set -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+# CONFIG_CRYPTO_MD5 is not set -+# CONFIG_CRYPTO_SHA1 is not set -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_CBC=m -+CONFIG_CRYPTO_PCBC=m -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_DES is not set -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+CONFIG_CRYPTO_AES=m -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+CONFIG_CRYPTO_ARC4=m -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+CONFIG_CRYPTO_MICHAEL_MIC=m -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Hardware crypto devices -+# -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+CONFIG_CRC32=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/kafa_defconfig linux-2.6/arch/arm/configs/kafa_defconfig ---- linux-2.6.24/arch/arm/configs/kafa_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/kafa_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -587,14 +587,14 @@ - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=y - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=y -+CONFIG_I2C_GPIO=y - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_STUB is not set - # CONFIG_I2C_PCA_ISA is not set -diff -urN -x CVS linux-2.6.24/arch/arm/configs/kb9202_defconfig linux-2.6/arch/arm/configs/kb9202_defconfig ---- linux-2.6.24/arch/arm/configs/kb9202_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/kb9202_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -1,19 +1,31 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.13-rc2 --# Sun Aug 14 19:26:59 2005 -+# Linux kernel version: 2.6.21 -+# Mon May 7 11:43:14 2007 - # - CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set - CONFIG_MMU=y --CONFIG_UID16=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y - CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - - # - # Code maturity level options - # --# CONFIG_EXPERIMENTAL is not set --CONFIG_CLEAN_COMPILE=y -+CONFIG_EXPERIMENTAL=y - CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 - -@@ -21,54 +33,103 @@ - # General setup - # - CONFIG_LOCALVERSION="" --# CONFIG_SWAP is not set --# CONFIG_SYSVIPC is not set --# CONFIG_BSD_PROCESS_ACCT is not set -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+# CONFIG_IPC_NS is not set -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+# CONFIG_BSD_PROCESS_ACCT_V3 is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_UTS_NS is not set -+CONFIG_AUDIT=y -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - CONFIG_SYSCTL=y --# CONFIG_AUDIT is not set --CONFIG_HOTPLUG=y --# CONFIG_KOBJECT_UEVENT is not set --# CONFIG_IKCONFIG is not set - # CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y - CONFIG_KALLSYMS=y - # CONFIG_KALLSYMS_ALL is not set --# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_KALLSYMS_EXTRA_PASS=y -+CONFIG_HOTPLUG=y - CONFIG_PRINTK=y - CONFIG_BUG=y -+CONFIG_ELF_CORE=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y - CONFIG_EPOLL=y --CONFIG_CC_OPTIMIZE_FOR_SIZE=y - CONFIG_SHMEM=y --CONFIG_CC_ALIGN_FUNCTIONS=0 --CONFIG_CC_ALIGN_LABELS=0 --CONFIG_CC_ALIGN_LOOPS=0 --CONFIG_CC_ALIGN_JUMPS=0 -+CONFIG_SLAB=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 -+# CONFIG_SLOB is not set - - # - # Loadable module support - # - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y --CONFIG_OBSOLETE_MODPARM=y --# CONFIG_MODULE_SRCVERSION_ALL is not set -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y - CONFIG_KMOD=y - - # -+# Block layer -+# -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+ -+# - # System Type - # -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y - # CONFIG_ARCH_CLPS7500 is not set - # CONFIG_ARCH_CLPS711X is not set - # CONFIG_ARCH_CO285 is not set - # CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set - # CONFIG_ARCH_FOOTBRIDGE is not set --# CONFIG_ARCH_INTEGRATOR is not set --# CONFIG_ARCH_IOP3XX is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IOP13XX is not set - # CONFIG_ARCH_IXP4XX is not set - # CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP23XX is not set - # CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set - # CONFIG_ARCH_RPC is not set - # CONFIG_ARCH_SA1100 is not set -@@ -76,34 +137,52 @@ - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set - # CONFIG_ARCH_OMAP is not set --# CONFIG_ARCH_VERSATILE is not set --# CONFIG_ARCH_IMX is not set --# CONFIG_ARCH_H720X is not set --# CONFIG_ARCH_AAEC2000 is not set --CONFIG_ARCH_AT91=y -+ -+# -+# Atmel AT91 System-on-Chip -+# - CONFIG_ARCH_AT91RM9200=y -+# CONFIG_ARCH_AT91SAM9260 is not set -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set - - # --# AT91RM9200 Implementations -+# AT91RM9200 Board Type - # -+# CONFIG_MACH_ONEARM is not set - # CONFIG_ARCH_AT91RM9200DK is not set - # CONFIG_MACH_AT91RM9200EK is not set - # CONFIG_MACH_CSB337 is not set - # CONFIG_MACH_CSB637 is not set - # CONFIG_MACH_CARMEVA is not set -+# CONFIG_MACH_ATEB9200 is not set - CONFIG_MACH_KB9200=y -+# CONFIG_MACH_KAFA is not set -+# CONFIG_MACH_CHUB is not set -+ -+# -+# AT91 Board Options -+# -+ -+# -+# AT91 Feature Selections -+# -+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+# CONFIG_ATMEL_TCLIB is not set - - # - # Processor Type - # - CONFIG_CPU_32=y - CONFIG_CPU_ARM920T=y --CONFIG_CPU_32v4=y -+CONFIG_CPU_32v4T=y - CONFIG_CPU_ABRT_EV4T=y - CONFIG_CPU_CACHE_V4WT=y - CONFIG_CPU_CACHE_VIVT=y - CONFIG_CPU_COPY_V4WB=y - CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y - - # - # Processor Features -@@ -112,24 +191,44 @@ - # CONFIG_CPU_ICACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_DISABLE is not set - # CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set - - # - # Bus support - # --CONFIG_ISA_DMA_API=y - - # - # PCCARD (PCMCIA/CardBus) support - # --# CONFIG_PCCARD is not set -+CONFIG_PCCARD=m -+# CONFIG_PCMCIA_DEBUG is not set -+CONFIG_PCMCIA=m -+CONFIG_PCMCIA_LOAD_CIS=y -+CONFIG_PCMCIA_IOCTL=y -+ -+# -+# PC-card bridges -+# -+# CONFIG_AT91_CF is not set - - # - # Kernel Features - # -+# CONFIG_PREEMPT is not set - # CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set - # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -138,8 +237,10 @@ - # - CONFIG_ZBOOT_ROM_TEXT=0x10000000 - CONFIG_ZBOOT_ROM_BSS=0x20040000 --CONFIG_ZBOOT_ROM=y --CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" -+# CONFIG_ZBOOT_ROM is not set -+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set - - # - # Floating point emulation -@@ -150,6 +251,7 @@ - # - CONFIG_FPE_NWFPE=y - # CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set - - # - # Userspace binary formats -@@ -165,6 +267,96 @@ - # CONFIG_PM is not set - - # -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+# CONFIG_NETDEBUG is not set -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_DIAG is not set -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+ -+# -+# DCCP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_DCCP is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+CONFIG_IP_SCTP=m -+# CONFIG_SCTP_DBG_MSG is not set -+# CONFIG_SCTP_DBG_OBJCNT is not set -+# CONFIG_SCTP_HMAC_NONE is not set -+# CONFIG_SCTP_HMAC_SHA1 is not set -+CONFIG_SCTP_HMAC_MD5=y -+ -+# -+# TIPC Configuration (EXPERIMENTAL) -+# -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_IEEE80211 is not set -+ -+# - # Device Drivers - # - -@@ -173,13 +365,95 @@ - # - CONFIG_STANDALONE=y - CONFIG_PREVENT_FIRMWARE_BUILD=y --# CONFIG_FW_LOADER is not set --CONFIG_DEBUG_DRIVER=y -+CONFIG_FW_LOADER=y -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+ -+# -+# Connector - unified userspace <-> kernelspace linker -+# -+# CONFIG_CONNECTOR is not set - - # - # Memory Technology Devices (MTD) - # --# CONFIG_MTD is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+# CONFIG_MTD_OBSOLETE_CHIPS is not set -+ -+# -+# Mapping drivers for chip access -+# -+CONFIG_MTD_COMPLEX_MAPPINGS=y -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+ -+# -+# NAND Flash Device Drivers -+# -+CONFIG_MTD_NAND=y -+# CONFIG_MTD_NAND_VERIFY_WRITE is not set -+# CONFIG_MTD_NAND_ECC_SMC is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_AT91=y -+# CONFIG_MTD_NAND_NANDSIM is not set -+ -+# -+# OneNAND Flash Device Drivers -+# -+# CONFIG_MTD_ONENAND is not set - - # - # Parallel port support -@@ -189,6 +463,7 @@ - # - # Plug and Play support - # -+# CONFIG_PNPACPI is not set - - # - # Block devices -@@ -196,28 +471,27 @@ - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=y - # CONFIG_BLK_DEV_CRYPTOLOOP is not set --CONFIG_BLK_DEV_NBD=y -+# CONFIG_BLK_DEV_NBD is not set - # CONFIG_BLK_DEV_UB is not set - CONFIG_BLK_DEV_RAM=y - CONFIG_BLK_DEV_RAM_COUNT=16 --CONFIG_BLK_DEV_RAM_SIZE=4096 --CONFIG_BLK_DEV_INITRD=y --CONFIG_INITRAMFS_SOURCE="" -+CONFIG_BLK_DEV_RAM_SIZE=16384 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 - # CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set - - # --# IO Schedulers -+# ATA/ATAPI/MFM/RLL support - # --CONFIG_IOSCHED_NOOP=y --CONFIG_IOSCHED_AS=y --CONFIG_IOSCHED_DEADLINE=y --CONFIG_IOSCHED_CFQ=y --# CONFIG_ATA_OVER_ETH is not set -+# CONFIG_IDE is not set - - # - # SCSI device support - # -+# CONFIG_RAID_ATTRS is not set - CONFIG_SCSI=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set - CONFIG_SCSI_PROC_FS=y - - # -@@ -233,97 +507,61 @@ - # - # Some SCSI devices (e.g. CD jukebox) support multiple LUNs - # --# CONFIG_SCSI_MULTI_LUN is not set --# CONFIG_SCSI_CONSTANTS is not set --# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_MULTI_LUN=y -+CONFIG_SCSI_CONSTANTS=y -+CONFIG_SCSI_LOGGING=y -+# CONFIG_SCSI_SCAN_ASYNC is not set - - # --# SCSI Transport Attributes -+# SCSI Transports - # --# CONFIG_SCSI_SPI_ATTRS is not set -+CONFIG_SCSI_SPI_ATTRS=m - # CONFIG_SCSI_FC_ATTRS is not set - # CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set - - # - # SCSI low-level drivers - # --# CONFIG_SCSI_SATA is not set -+# CONFIG_ISCSI_TCP is not set - # CONFIG_SCSI_DEBUG is not set - - # --# Multi-device support (RAID and LVM) --# --# CONFIG_MD is not set -- --# --# Fusion MPT device support -+# PCMCIA SCSI adapter support - # --# CONFIG_FUSION is not set -+# CONFIG_PCMCIA_AHA152X is not set -+# CONFIG_PCMCIA_FDOMAIN is not set -+# CONFIG_PCMCIA_NINJA_SCSI is not set -+# CONFIG_PCMCIA_QLOGIC is not set -+# CONFIG_PCMCIA_SYM53C500 is not set - - # --# IEEE 1394 (FireWire) support -+# Serial ATA (prod) and Parallel ATA (experimental) drivers - # -+# CONFIG_ATA is not set - - # --# I2O device support -+# Multi-device support (RAID and LVM) - # -+# CONFIG_MD is not set - - # --# Networking support -+# Fusion MPT device support - # --CONFIG_NET=y -+# CONFIG_FUSION is not set - - # --# Networking options -+# IEEE 1394 (FireWire) support - # --CONFIG_PACKET=y --# CONFIG_PACKET_MMAP is not set --CONFIG_UNIX=y --# CONFIG_NET_KEY is not set --CONFIG_INET=y --CONFIG_IP_MULTICAST=y --# CONFIG_IP_ADVANCED_ROUTER is not set --CONFIG_IP_FIB_HASH=y --CONFIG_IP_PNP=y --CONFIG_IP_PNP_DHCP=y --# CONFIG_IP_PNP_BOOTP is not set --# CONFIG_IP_PNP_RARP is not set --# CONFIG_NET_IPIP is not set --# CONFIG_NET_IPGRE is not set --# CONFIG_IP_MROUTE is not set --# CONFIG_SYN_COOKIES is not set --# CONFIG_INET_AH is not set --# CONFIG_INET_ESP is not set --# CONFIG_INET_IPCOMP is not set --# CONFIG_INET_TUNNEL is not set --# CONFIG_IP_TCPDIAG is not set --# CONFIG_IP_TCPDIAG_IPV6 is not set --# CONFIG_TCP_CONG_ADVANCED is not set --CONFIG_TCP_CONG_BIC=y --# CONFIG_IPV6 is not set --# CONFIG_NETFILTER is not set --# CONFIG_BRIDGE is not set --# CONFIG_VLAN_8021Q is not set --# CONFIG_DECNET is not set --# CONFIG_LLC2 is not set --# CONFIG_IPX is not set --# CONFIG_ATALK is not set - - # --# QoS and/or fair queueing -+# I2O device support - # --# CONFIG_NET_SCHED is not set --# CONFIG_NET_CLS_ROUTE is not set - - # --# Network testing -+# Network device support - # --# CONFIG_NET_PKTGEN is not set --# CONFIG_NETPOLL is not set --# CONFIG_NET_POLL_CONTROLLER is not set --# CONFIG_HAMRADIO is not set --# CONFIG_IRDA is not set --# CONFIG_BT is not set - CONFIG_NETDEVICES=y - # CONFIG_DUMMY is not set - # CONFIG_BONDING is not set -@@ -331,6 +569,11 @@ - # CONFIG_TUN is not set - - # -+# PHY device support -+# -+# CONFIG_PHYLIB is not set -+ -+# - # Ethernet (10 or 100Mbit) - # - CONFIG_NET_ETHERNET=y -@@ -357,11 +600,20 @@ - # CONFIG_NET_RADIO is not set - - # -+# PCMCIA network device support -+# -+# CONFIG_NET_PCMCIA is not set -+ -+# - # Wan interfaces - # - # CONFIG_WAN is not set - # CONFIG_PPP is not set - # CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set - - # - # ISDN subsystem -@@ -372,6 +624,7 @@ - # Input device support - # - CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set - - # - # Userland interfaces -@@ -397,9 +650,7 @@ - # - # Hardware I/O ports - # --CONFIG_SERIO=y --# CONFIG_SERIO_SERPORT is not set --# CONFIG_SERIO_RAW is not set -+# CONFIG_SERIO is not set - # CONFIG_GAMEPORT is not set - - # -@@ -408,6 +659,7 @@ - CONFIG_VT=y - CONFIG_VT_CONSOLE=y - CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set - # CONFIG_SERIAL_NONSTANDARD is not set - - # -@@ -420,11 +672,11 @@ - # - CONFIG_SERIAL_ATMEL=y - CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set - CONFIG_SERIAL_CORE=y - CONFIG_SERIAL_CORE_CONSOLE=y - CONFIG_UNIX98_PTYS=y --CONFIG_LEGACY_PTYS=y --CONFIG_LEGACY_PTY_COUNT=256 -+# CONFIG_LEGACY_PTYS is not set - - # - # IPMI -@@ -435,21 +687,23 @@ - # Watchdog Cards - # - # CONFIG_WATCHDOG is not set -+# CONFIG_HW_RANDOM is not set - # CONFIG_NVRAM is not set --# CONFIG_RTC is not set --# CONFIG_AT91RM9200_RTC is not set - # CONFIG_DTLK is not set - # CONFIG_R3964 is not set - - # --# Ftape, the floppy tape device driver -+# PCMCIA character devices - # -+# CONFIG_SYNCLINK_CS is not set -+# CONFIG_CARDMAN_4000 is not set -+# CONFIG_CARDMAN_4040 is not set - # CONFIG_RAW_DRIVER is not set - - # - # TPM devices - # --# CONFIG_AT91_SPI is not set -+# CONFIG_TCG_TPM is not set - - # - # I2C support -@@ -457,10 +711,50 @@ - # CONFIG_I2C is not set - - # -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_SPI_MASTER is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+ -+# -+# Hardware Monitoring support -+# -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_ABITUGURU is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_VT1211 is not set -+CONFIG_HWMON_DEBUG_CHIP=y -+ -+# - # Misc devices - # - - # -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# LED devices -+# -+# CONFIG_NEW_LEDS is not set -+ -+# -+# LED drivers -+# -+ -+# -+# LED Triggers -+# -+ -+# - # Multimedia devices - # - # CONFIG_VIDEO_DEV is not set -@@ -469,17 +763,57 @@ - # Digital Video Broadcasting Devices - # - # CONFIG_DVB is not set -+# CONFIG_USB_DABUSB is not set - - # - # Graphics support - # --# CONFIG_FB is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+# CONFIG_LCD_CLASS_DEVICE is not set -+CONFIG_BACKLIGHT_KB920x=y -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+CONFIG_FB_MODE_HELPERS=y -+CONFIG_FB_TILEBLITTING=y -+ -+# -+# Frame buffer hardware drivers -+# -+CONFIG_FB_S1D15605=y -+# CONFIG_FB_S1D13XXX is not set -+# CONFIG_FB_VIRTUAL is not set - - # - # Console display driver support - # - # CONFIG_VGA_CONSOLE is not set - CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+# CONFIG_FONT_6x11 is not set -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+CONFIG_FONT_MINI_4x6=y -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+ -+# -+# Logo configuration -+# -+# CONFIG_LOGO is not set - - # - # Sound -@@ -487,82 +821,98 @@ - # CONFIG_SOUND is not set - - # -+# HID Devices -+# -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+ -+# - # USB support - # - CONFIG_USB_ARCH_HAS_HCD=y - CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set - CONFIG_USB=y --CONFIG_USB_DEBUG=y -+# CONFIG_USB_DEBUG is not set - - # - # Miscellaneous USB options - # - CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set - - # - # USB Host Controller Drivers - # - # CONFIG_USB_ISP116X_HCD is not set - CONFIG_USB_OHCI_HCD=y --# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set - CONFIG_USB_OHCI_LITTLE_ENDIAN=y - # CONFIG_USB_SL811_HCD is not set - - # - # USB Device Class drivers - # --# CONFIG_USB_BLUETOOTH_TTY is not set - # CONFIG_USB_ACM is not set - # CONFIG_USB_PRINTER is not set - - # --# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information - # - CONFIG_USB_STORAGE=y --CONFIG_USB_STORAGE_DEBUG=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set - # CONFIG_USB_STORAGE_FREECOM is not set - # CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+CONFIG_USB_LIBUSUAL=y - - # - # USB Input Devices - # --# CONFIG_USB_HID is not set -- --# --# USB HID Boot Protocol drivers --# --# CONFIG_USB_KBD is not set --# CONFIG_USB_MOUSE is not set -+CONFIG_USB_HID=y -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+# CONFIG_USB_HIDDEV is not set - # CONFIG_USB_AIPTEK is not set - # CONFIG_USB_WACOM is not set - # CONFIG_USB_ACECAD is not set - # CONFIG_USB_KBTAB is not set - # CONFIG_USB_POWERMATE is not set --# CONFIG_USB_MTOUCH is not set --# CONFIG_USB_ITMTOUCH is not set --# CONFIG_USB_EGALAX is not set -+# CONFIG_USB_TOUCHSCREEN is not set -+# CONFIG_USB_YEALINK is not set - # CONFIG_USB_XPAD is not set - # CONFIG_USB_ATI_REMOTE is not set -+# CONFIG_USB_ATI_REMOTE2 is not set -+# CONFIG_USB_KEYSPAN_REMOTE is not set -+# CONFIG_USB_APPLETOUCH is not set -+# CONFIG_USB_GTCO is not set - - # - # USB Imaging devices - # -+# CONFIG_USB_MDC800 is not set - # CONFIG_USB_MICROTEK is not set - - # --# USB Multimedia devices --# --# CONFIG_USB_DABUSB is not set -- --# --# Video4Linux support is needed for USB Multimedia device support --# -- --# - # USB Network Adapters - # -+# CONFIG_USB_CATC is not set - # CONFIG_USB_KAWETH is not set - # CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set - # CONFIG_USB_USBNET is not set - # CONFIG_USB_MON is not set - -@@ -580,12 +930,23 @@ - # - # CONFIG_USB_EMI62 is not set - # CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set - # CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set - # CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set - # CONFIG_USB_CYTHERM is not set --# CONFIG_USB_PHIDGETKIT is not set --# CONFIG_USB_PHIDGETSERVO is not set -+# CONFIG_USB_PHIDGET is not set - # CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set - - # - # USB DSL modem support -@@ -599,36 +960,51 @@ - # - # MMC/SD Card support - # --# CONFIG_MMC is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_AT91=y -+ -+# -+# Real Time Clock -+# -+CONFIG_RTC_LIB=y -+# CONFIG_RTC_CLASS is not set - - # - # File systems - # - CONFIG_EXT2_FS=y - CONFIG_EXT2_FS_XATTR=y --# CONFIG_EXT2_FS_POSIX_ACL is not set --# CONFIG_EXT2_FS_SECURITY is not set -+CONFIG_EXT2_FS_POSIX_ACL=y -+CONFIG_EXT2_FS_SECURITY=y - # CONFIG_EXT2_FS_XIP is not set - CONFIG_EXT3_FS=y - CONFIG_EXT3_FS_XATTR=y --# CONFIG_EXT3_FS_POSIX_ACL is not set --# CONFIG_EXT3_FS_SECURITY is not set -+CONFIG_EXT3_FS_POSIX_ACL=y -+CONFIG_EXT3_FS_SECURITY=y -+# CONFIG_EXT4DEV_FS is not set - CONFIG_JBD=y - # CONFIG_JBD_DEBUG is not set - CONFIG_FS_MBCACHE=y - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set -- --# --# XFS support --# -+CONFIG_FS_POSIX_ACL=y - # CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set - # CONFIG_MINIX_FS is not set - # CONFIG_ROMFS_FS is not set --# CONFIG_QUOTA is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+CONFIG_QUOTA=y -+# CONFIG_QFMT_V1 is not set -+CONFIG_QFMT_V2=y -+CONFIG_QUOTACTL=y - CONFIG_DNOTIFY=y --CONFIG_AUTOFS_FS=y -+# CONFIG_AUTOFS_FS is not set - CONFIG_AUTOFS4_FS=y -+# CONFIG_FUSE_FS is not set - - # - # CD-ROM/DVD Filesystems -@@ -643,25 +1019,40 @@ - CONFIG_MSDOS_FS=y - CONFIG_VFAT_FS=y - CONFIG_FAT_DEFAULT_CODEPAGE=437 --CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" - # CONFIG_NTFS_FS is not set - - # - # Pseudo filesystems - # - CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y - CONFIG_SYSFS=y --CONFIG_DEVPTS_FS_XATTR=y --# CONFIG_DEVPTS_FS_SECURITY is not set - CONFIG_TMPFS=y --# CONFIG_TMPFS_XATTR is not set -+# CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set - CONFIG_RAMFS=y -+CONFIG_CONFIGFS_FS=y - - # - # Miscellaneous filesystems - # -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set - # CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set - # CONFIG_CRAMFS is not set - # CONFIG_VXFS_FS is not set - # CONFIG_HPFS_FS is not set -@@ -675,16 +1066,23 @@ - CONFIG_NFS_FS=y - CONFIG_NFS_V3=y - # CONFIG_NFS_V3_ACL is not set -+CONFIG_NFS_V4=y -+# CONFIG_NFS_DIRECTIO is not set - # CONFIG_NFSD is not set - CONFIG_ROOT_NFS=y - CONFIG_LOCKD=y - CONFIG_LOCKD_V4=y - CONFIG_NFS_COMMON=y - CONFIG_SUNRPC=y -+CONFIG_SUNRPC_GSS=y -+CONFIG_RPCSEC_GSS_KRB5=y -+# CONFIG_RPCSEC_GSS_SPKM3 is not set - # CONFIG_SMB_FS is not set - # CONFIG_CIFS is not set - # CONFIG_NCP_FS is not set - # CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+# CONFIG_9P_FS is not set - - # - # Partition Types -@@ -734,26 +1132,51 @@ - # CONFIG_NLS_ISO8859_15 is not set - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set --# CONFIG_NLS_UTF8 is not set -+CONFIG_NLS_UTF8=y -+ -+# -+# Distributed Lock Manager -+# -+# CONFIG_DLM is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set - - # - # Kernel hacking - # - # CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set - CONFIG_DEBUG_KERNEL=y --# CONFIG_MAGIC_SYSRQ is not set --CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_LOG_BUF_SHIFT=17 -+CONFIG_DETECT_SOFTLOCKUP=y - # CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set - # CONFIG_DEBUG_SLAB is not set --# CONFIG_DEBUG_SPINLOCK is not set --# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+CONFIG_DEBUG_SPINLOCK=y -+# CONFIG_DEBUG_MUTEXES is not set -+CONFIG_DEBUG_SPINLOCK_SLEEP=y -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set - # CONFIG_DEBUG_KOBJECT is not set - CONFIG_DEBUG_BUGVERBOSE=y - # CONFIG_DEBUG_INFO is not set --# CONFIG_DEBUG_FS is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set - CONFIG_FRAME_POINTER=y --CONFIG_DEBUG_USER=y --CONFIG_DEBUG_ERRORS=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_DEBUG_USER is not set -+# CONFIG_DEBUG_ERRORS is not set - CONFIG_DEBUG_LL=y - # CONFIG_DEBUG_ICEDCC is not set - -@@ -766,7 +1189,43 @@ - # - # Cryptographic options - # --# CONFIG_CRYPTO is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=m -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=m -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+# CONFIG_CRYPTO_SHA1 is not set -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_ECB is not set -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+# CONFIG_CRYPTO_LRW is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_TEST is not set - - # - # Hardware crypto devices -@@ -775,6 +1234,14 @@ - # - # Library routines - # -+CONFIG_BITREVERSE=y - # CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set - CONFIG_CRC32=y - # CONFIG_LIBCRC32C is not set -+CONFIG_AUDIT_GENERIC=y -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -diff -urN -x CVS linux-2.6.24/arch/arm/configs/picotux200_defconfig linux-2.6/arch/arm/configs/picotux200_defconfig ---- linux-2.6.24/arch/arm/configs/picotux200_defconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/configs/picotux200_defconfig 2007-12-31 10:43:35.000000000 +0200 -@@ -727,14 +727,14 @@ - # - # I2C Algorithms - # --# CONFIG_I2C_ALGOBIT is not set -+CONFIG_I2C_ALGOBIT=m - # CONFIG_I2C_ALGOPCF is not set - # CONFIG_I2C_ALGOPCA is not set - - # - # I2C Hardware Bus support - # --CONFIG_I2C_AT91=m -+CONFIG_I2C_GPIO=m - # CONFIG_I2C_OCORES is not set - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_STUB is not set -diff -urN -x CVS linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig linux-2.6/arch/arm/configs/sam9_l9260_defconfig ---- linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/configs/sam9_l9260_defconfig 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,1098 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.23 -+# Sun Oct 14 02:01:07 2007 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+# CONFIG_NO_IOPORT is not set -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+CONFIG_AUDIT=y -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=15 -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+# CONFIG_MODULES is not set -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+CONFIG_LSF=y -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+CONFIG_ARCH_AT91=y -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+ -+# -+# Boot options -+# -+ -+# -+# Power management -+# -+ -+# -+# Atmel AT91 System-on-Chip -+# -+# CONFIG_ARCH_AT91RM9200 is not set -+CONFIG_ARCH_AT91SAM9260=y -+# CONFIG_ARCH_AT91SAM9261 is not set -+# CONFIG_ARCH_AT91SAM9263 is not set -+# CONFIG_ARCH_AT91SAM9RL is not set -+ -+# -+# AT91SAM9260 Variants -+# -+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set -+ -+# -+# AT91SAM9260 / AT91SAM9XE Board Type -+# -+# CONFIG_MACH_AT91SAM9260EK is not set -+# CONFIG_MACH_CAM60 is not set -+CONFIG_MACH_SAM9_L9260=y -+ -+# -+# AT91 Board Options -+# -+CONFIG_MTD_AT91_DATAFLASH_CARD=y -+ -+# -+# AT91 Feature Selections -+# -+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -+# CONFIG_ATMEL_TCLIB is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM926T=y -+CONFIG_CPU_32v5=y -+CONFIG_CPU_ABRT_EV5TJ=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+CONFIG_PREEMPT=y -+# CONFIG_NO_IDLE_HZ is not set -+CONFIG_HZ=100 -+# CONFIG_AEABI is not set -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+CONFIG_LEDS=y -+CONFIG_LEDS_TIMER=y -+CONFIG_LEDS_CPU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+# CONFIG_VFP is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_ARTHUR is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+CONFIG_SUSPEND_UP_POSSIBLE=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=y -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_PNP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+# CONFIG_MTD_CMDLINE_PARTS is not set -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+CONFIG_MTD_BLOCK2MTD=y -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+# CONFIG_MTD_NAND_VERIFY_WRITE is not set -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_AT91=y -+# CONFIG_MTD_NAND_NANDSIM is not set -+CONFIG_MTD_NAND_PLATFORM=y -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=3 -+CONFIG_MTD_UBI_GLUEBI=y -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=8192 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# SCSI device support -+# -+CONFIG_RAID_ATTRS=y -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+CONFIG_CHR_DEV_SG=y -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+CONFIG_SCSI_CONSTANTS=y -+CONFIG_SCSI_LOGGING=y -+# CONFIG_SCSI_SCAN_ASYNC is not set -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_FIXED_PHY is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_MACB=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET_MII is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=16 -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_WATCHDOG is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+# CONFIG_I2C is not set -+ -+# -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_SPI_MASTER is not set -+# CONFIG_W1 is not set -+# CONFIG_HWMON is not set -+# CONFIG_MISC_DEVICES is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_GPIO=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+# CONFIG_HID_SUPPORT is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+CONFIG_USB_GADGET_AT91=y -+CONFIG_USB_AT91=y -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+CONFIG_USB_ETH_RNDIS=y -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+CONFIG_MMC=y -+CONFIG_MMC_DEBUG=y -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+ -+# -+# MMC/SD Host Controller Drivers -+# -+CONFIG_MMC_AT91=y -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# SPI RTC drivers -+# -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+CONFIG_RTC_DRV_DS1553=y -+# CONFIG_RTC_DRV_STK17TA8 is not set -+CONFIG_RTC_DRV_DS1742=y -+CONFIG_RTC_DRV_M48T86=y -+# CONFIG_RTC_DRV_M48T59 is not set -+CONFIG_RTC_DRV_V3020=y -+ -+# -+# on-CPU RTC drivers -+# -+ -+# -+# DMA Engine support -+# -+# CONFIG_DMA_ENGINE is not set -+ -+# -+# DMA Clients -+# -+ -+# -+# DMA Devices -+# -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+CONFIG_EXT2_FS_XATTR=y -+CONFIG_EXT2_FS_POSIX_ACL=y -+CONFIG_EXT2_FS_SECURITY=y -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+CONFIG_EXT3_FS_POSIX_ACL=y -+CONFIG_EXT3_FS_SECURITY=y -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_NFS_DIRECTIO=y -+# CONFIG_NFSD is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=y -+CONFIG_NLS_CODEPAGE_775=y -+CONFIG_NLS_CODEPAGE_850=y -+CONFIG_NLS_CODEPAGE_852=y -+CONFIG_NLS_CODEPAGE_855=y -+CONFIG_NLS_CODEPAGE_857=y -+CONFIG_NLS_CODEPAGE_860=y -+CONFIG_NLS_CODEPAGE_861=y -+CONFIG_NLS_CODEPAGE_862=y -+CONFIG_NLS_CODEPAGE_863=y -+CONFIG_NLS_CODEPAGE_864=y -+CONFIG_NLS_CODEPAGE_865=y -+CONFIG_NLS_CODEPAGE_866=y -+CONFIG_NLS_CODEPAGE_869=y -+CONFIG_NLS_CODEPAGE_936=y -+CONFIG_NLS_CODEPAGE_950=y -+CONFIG_NLS_CODEPAGE_932=y -+CONFIG_NLS_CODEPAGE_949=y -+CONFIG_NLS_CODEPAGE_874=y -+CONFIG_NLS_ISO8859_8=y -+CONFIG_NLS_CODEPAGE_1250=y -+CONFIG_NLS_CODEPAGE_1251=y -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=y -+CONFIG_NLS_ISO8859_2=y -+CONFIG_NLS_ISO8859_3=y -+CONFIG_NLS_ISO8859_4=y -+CONFIG_NLS_ISO8859_5=y -+CONFIG_NLS_ISO8859_6=y -+CONFIG_NLS_ISO8859_7=y -+CONFIG_NLS_ISO8859_9=y -+CONFIG_NLS_ISO8859_13=y -+CONFIG_NLS_ISO8859_14=y -+CONFIG_NLS_ISO8859_15=y -+CONFIG_NLS_KOI8_R=y -+CONFIG_NLS_KOI8_U=y -+CONFIG_NLS_UTF8=y -+ -+# -+# Distributed Lock Manager -+# -+# CONFIG_DLM is not set -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+CONFIG_UNUSED_SYMBOLS=y -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_DEBUG_USER is not set -+# CONFIG_DEBUG_ERRORS is not set -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_AUDIT_GENERIC=y -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig ---- linux-2.6.24/arch/arm/mach-at91/Kconfig 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-03-01 19:29:48.000000000 +0200 -@@ -12,15 +12,28 @@ - - config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" -+ select GENERIC_TIME -+ select GENERIC_CLOCKEVENTS - - config ARCH_AT91SAM9261 - bool "AT91SAM9261" -+ select GENERIC_TIME -+ select GENERIC_CLOCKEVENTS - - config ARCH_AT91SAM9263 - bool "AT91SAM9263" -+ select GENERIC_TIME -+ select GENERIC_CLOCKEVENTS - - config ARCH_AT91SAM9RL - bool "AT91SAM9RL" -+ select GENERIC_TIME -+ select GENERIC_CLOCKEVENTS -+ -+config ARCH_AT91CAP9 -+ bool "AT91CAP9" -+ select GENERIC_TIME -+ select GENERIC_CLOCKEVENTS - - config ARCH_AT91X40 - bool "AT91x40" -@@ -42,7 +55,7 @@ - depends on ARCH_AT91RM9200 - help - Select this if you are using Ajeco's 1ARM Single Board Computer. -- <http://www.ajeco.fi/products.htm> -+ <http://www.ajeco.fi/eng/products_e.htm> - - config ARCH_AT91RM9200DK - bool "Atmel AT91RM9200-DK Development board" -@@ -106,6 +119,32 @@ - help - Select this if you are using Sperry-Sun's KAFA board. - -+config MACH_CHUB -+ bool "Promwad Chub board" -+ depends on ARCH_AT91RM9200 -+ help -+ Select this if you are using Promwad's Chub board. -+ -+config MACH_HOMEMATIC -+ bool "eQ-3 HomeMatic" -+ depends on ARCH_AT91RM9200 -+ help -+ Select this if you are using eQ-3's HomeMatic device. -+ <http://www.eq-3.com> -+ -+config MACH_ECBAT91 -+ bool "emQbit ECB_AT91 SBC" -+ depends on ARCH_AT91RM9200 -+ help -+ Select this if you are using emQbit's ECB_AT91 board. -+ <http://wiki.emqbit.com/free-ecb-at91> -+ -+config MACH_SWEDATMS -+ bool "Sweda TMS Board" -+ depends on ARCH_AT91RM9200 -+ help -+ Select this if you are using Sweda TMS-100 board. -+ - endif - - # ---------------------------------------------------------- -@@ -130,6 +169,20 @@ - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> - -+config MACH_CAM60 -+ bool "KwikByte CAM60 board" -+ depends on ARCH_AT91SAM9260 -+ help -+ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260. -+ <http://www.kwikbyte.com> -+ -+config MACH_SAM9_L9260 -+ bool "Olimex SAM9-L9260 board" -+ depends on ARCH_AT91SAM9260 -+ help -+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. -+ http://www.olimex.com/dev/sam9-L9260.html -+ - endif - - # ---------------------------------------------------------- -@@ -178,6 +231,21 @@ - - # ---------------------------------------------------------- - -+if ARCH_AT91CAP9 -+ -+comment "AT91CAP9 Board Type" -+ -+config MACH_AT91CAP9ADK -+ bool "Atmel AT91CAP9A-DK Evaluation Kit" -+ depends on ARCH_AT91CAP9 -+ help -+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. -+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> -+ -+endif -+ -+# ---------------------------------------------------------- -+ - if ARCH_AT91X40 - - comment "AT91X40 Board Type" -@@ -198,13 +266,13 @@ - - config MTD_AT91_DATAFLASH_CARD - bool "Enable DataFlash Card support" -- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) -+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK) - help - Enable support for the DataFlash card. - - config MTD_NAND_AT91_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" -- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) -+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). -@@ -219,6 +287,65 @@ - Select this if you need to program one or more of the PCK0..PCK3 - programmable clock outputs. - -+config AT91_SLOW_CLOCK -+ bool "Suspend-to-RAM disables main oscillator" -+ depends on SUSPEND -+ help -+ Select this if you want Suspend-to-RAM to save the most power -+ possible (without powering off the CPU) by disabling the PLLs -+ and main oscillator so that only the 32 KiHz clock is available. -+ -+ When only that slow-clock is available, some peripherals lose -+ functionality. Many can't issue wakeup events unless faster -+ clocks are available. Some lose their operating state and -+ need to be completely re-initialized. -+ -+config AT91_TIMER_HZ -+ int "Kernel HZ (jiffies per second)" -+ range 32 1024 -+ depends on ARCH_AT91 -+ default "128" if ARCH_AT91RM9200 -+ default "100" -+ help -+ On AT91rm9200 chips where you're using a system clock derived -+ from the 32768 Hz hardware clock, this tick rate should divide -+ it exactly: use a power-of-two value, such as 128 or 256, to -+ reduce timing errors caused by rounding. -+ -+ On AT91sam926x chips, or otherwise using a higher precision -+ system clock (of at least several MHz), rounding is less of a -+ problem so it can be safer to use a decimal values like 100. -+ -+choice -+ prompt "Select a UART for early kernel messages" -+ -+config AT91_EARLY_DBGU -+ bool "DBGU" -+ -+config AT91_EARLY_USART0 -+ bool "USART0" -+ -+config AT91_EARLY_USART1 -+ bool "USART1" -+ -+config AT91_EARLY_USART2 -+ bool "USART2" -+ depends on ! ARCH_AT91X40 -+ -+config AT91_EARLY_USART3 -+ bool "USART3" -+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260) -+ -+config AT91_EARLY_USART4 -+ bool "USART4" -+ depends on ARCH_AT91SAM9260 -+ -+config AT91_EARLY_USART5 -+ bool "USART5" -+ depends on ARCH_AT91SAM9260 -+ -+endchoice -+ - endmenu - - endif -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile ---- linux-2.6.24/arch/arm/mach-at91/Makefile 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/Makefile 2008-03-01 18:45:33.000000000 +0200 -@@ -8,7 +8,6 @@ - obj- := - - obj-$(CONFIG_AT91_PMC_UNIT) += clock.o --obj-$(CONFIG_PM) += pm.o - - # CPU-specific support - obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -@@ -16,6 +15,7 @@ - obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o - obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o - obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o -+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o - obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o - - # AT91RM9200 board-specific support -@@ -28,11 +28,16 @@ - obj-$(CONFIG_MACH_KB9200) += board-kb9202.o - obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o - obj-$(CONFIG_MACH_KAFA) += board-kafa.o -+obj-$(CONFIG_MACH_CHUB) += board-chub.o - obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o --obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o -+obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o -+obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o -+obj-$(CONFIG_MACH_SWEDATMS) += board-tms.o - - # AT91SAM9260 board-specific support - obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o -+obj-$(CONFIG_MACH_CAM60) += board-cam60.o -+obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o - - # AT91SAM9261 board-specific support - obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o -@@ -43,19 +48,19 @@ - # AT91SAM9RL board-specific support - obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o - --# LEDs support --led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o --led-$(CONFIG_MACH_AT91RM9200EK) += leds.o --led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o --led-$(CONFIG_MACH_CSB337) += leds.o --led-$(CONFIG_MACH_CSB637) += leds.o --led-$(CONFIG_MACH_KB9200) += leds.o --led-$(CONFIG_MACH_KAFA) += leds.o --obj-$(CONFIG_LEDS) += $(led-y) -+# AT91CAP9 board-specific support -+obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o - --# VGA support --#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o -+# AT91X40 board-specific support -+obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o - -+# Drivers -+obj-y += leds.o -+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o -+ -+# Power Management -+obj-$(CONFIG_PM) += pm.o -+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o - - ifeq ($(CONFIG_PM_DEBUG),y) - CFLAGS_pm.o += -DDEBUG -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile.boot linux-2.6/arch/arm/mach-at91/Makefile.boot ---- linux-2.6.24/arch/arm/mach-at91/Makefile.boot 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/Makefile.boot 2008-01-16 20:26:54.000000000 +0200 -@@ -3,7 +3,12 @@ - # PARAMS_PHYS must be within 4MB of ZRELADDR - # INITRD_PHYS must be in RAM - -+ifeq ($(CONFIG_ARCH_AT91CAP9),y) -+ zreladdr-y := 0x70008000 -+params_phys-y := 0x70000100 -+initrd_phys-y := 0x70410000 -+else - zreladdr-y := 0x20008000 - params_phys-y := 0x20000100 - initrd_phys-y := 0x20410000 -- -+endif -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c ---- linux-2.6.24/arch/arm/mach-at91/at91cap9.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-03-01 19:34:19.000000000 +0200 -@@ -0,0 +1,374 @@ -+/* -+ * arch/arm/mach-at91/at91cap9.c -+ * -+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> -+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -+ * Copyright (C) 2007 Atmel Corporation. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/pm.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/arch/at91cap9.h> -+#include <asm/arch/at91_pmc.h> -+#include <asm/arch/at91_rstc.h> -+#include <asm/arch/at91_shdwc.h> -+ -+#include "generic.h" -+#include "clock.h" -+ -+static struct map_desc at91cap9_io_desc[] __initdata = { -+ { -+ .virtual = AT91_VA_BASE_SYS, -+ .pfn = __phys_to_pfn(AT91_BASE_SYS), -+ .length = SZ_16K, -+ .type = MT_DEVICE, -+ }, { -+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, -+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), -+ .length = AT91CAP9_SRAM_SIZE, -+ .type = MT_DEVICE, -+ }, -+}; -+ -+/* -------------------------------------------------------------------- -+ * Clocks -+ * -------------------------------------------------------------------- */ -+ -+/* -+ * The peripheral clocks. -+ */ -+static struct clk pioABCD_clk = { -+ .name = "pioABCD_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mpb0_clk = { -+ .name = "mpb0_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MPB0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mpb1_clk = { -+ .name = "mpb1_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MPB1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mpb2_clk = { -+ .name = "mpb2_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MPB2, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mpb3_clk = { -+ .name = "mpb3_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MPB3, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mpb4_clk = { -+ .name = "mpb4_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MPB4, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk usart0_clk = { -+ .name = "usart0_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_US0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk usart1_clk = { -+ .name = "usart1_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_US1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk usart2_clk = { -+ .name = "usart2_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_US2, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mmc0_clk = { -+ .name = "mci0_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MCI0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk mmc1_clk = { -+ .name = "mci1_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_MCI1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk can_clk = { -+ .name = "can_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_CAN, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk twi_clk = { -+ .name = "twi_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_TWI, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk spi0_clk = { -+ .name = "spi0_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_SPI0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk spi1_clk = { -+ .name = "spi1_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_SPI1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ssc0_clk = { -+ .name = "ssc0_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_SSC0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ssc1_clk = { -+ .name = "ssc1_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_SSC1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ac97_clk = { -+ .name = "ac97_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_AC97C, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk tcb_clk = { -+ .name = "tcb_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_TCB, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk pwmc_clk = { -+ .name = "pwmc_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_PWMC, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk macb_clk = { -+ .name = "macb_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_EMAC, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk aestdes_clk = { -+ .name = "aestdes_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk adc_clk = { -+ .name = "adc_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_ADC, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk isi_clk = { -+ .name = "isi_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_ISI, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk lcdc_clk = { -+ .name = "lcdc_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_LCDC, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk dma_clk = { -+ .name = "dma_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_DMA, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk udphs_clk = { -+ .name = "udphs_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ohci_clk = { -+ .name = "ohci_clk", -+ .pmc_mask = 1 << AT91CAP9_ID_UHP, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+ -+static struct clk *periph_clocks[] __initdata = { -+ &pioABCD_clk, -+ &mpb0_clk, -+ &mpb1_clk, -+ &mpb2_clk, -+ &mpb3_clk, -+ &mpb4_clk, -+ &usart0_clk, -+ &usart1_clk, -+ &usart2_clk, -+ &mmc0_clk, -+ &mmc1_clk, -+ &can_clk, -+ &twi_clk, -+ &spi0_clk, -+ &spi1_clk, -+ &ssc0_clk, -+ &ssc1_clk, -+ &ac97_clk, -+ &tcb_clk, -+ &pwmc_clk, -+ &macb_clk, -+ &aestdes_clk, -+ &adc_clk, -+ &isi_clk, -+ &lcdc_clk, -+ &dma_clk, -+ &udphs_clk, -+ &ohci_clk, -+ // irq0 .. irq1 -+}; -+ -+/* -+ * The four programmable clocks. -+ * You must configure pin multiplexing to bring these signals out. -+ */ -+static struct clk pck0 = { -+ .name = "pck0", -+ .pmc_mask = AT91_PMC_PCK0, -+ .type = CLK_TYPE_PROGRAMMABLE, -+ .id = 0, -+}; -+static struct clk pck1 = { -+ .name = "pck1", -+ .pmc_mask = AT91_PMC_PCK1, -+ .type = CLK_TYPE_PROGRAMMABLE, -+ .id = 1, -+}; -+static struct clk pck2 = { -+ .name = "pck2", -+ .pmc_mask = AT91_PMC_PCK2, -+ .type = CLK_TYPE_PROGRAMMABLE, -+ .id = 2, -+}; -+static struct clk pck3 = { -+ .name = "pck3", -+ .pmc_mask = AT91_PMC_PCK3, -+ .type = CLK_TYPE_PROGRAMMABLE, -+ .id = 3, -+}; -+ -+static void __init at91cap9_register_clocks(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) -+ clk_register(periph_clocks[i]); -+ -+ clk_register(&pck0); -+ clk_register(&pck1); -+ clk_register(&pck2); -+ clk_register(&pck3); -+} -+ -+/* -------------------------------------------------------------------- -+ * GPIO -+ * -------------------------------------------------------------------- */ -+ -+static struct at91_gpio_bank at91cap9_gpio[] = { -+ { -+ .id = AT91CAP9_ID_PIOABCD, -+ .offset = AT91_PIOA, -+ .clock = &pioABCD_clk, -+ }, { -+ .id = AT91CAP9_ID_PIOABCD, -+ .offset = AT91_PIOB, -+ .clock = &pioABCD_clk, -+ }, { -+ .id = AT91CAP9_ID_PIOABCD, -+ .offset = AT91_PIOC, -+ .clock = &pioABCD_clk, -+ }, { -+ .id = AT91CAP9_ID_PIOABCD, -+ .offset = AT91_PIOD, -+ .clock = &pioABCD_clk, -+ } -+}; -+ -+static void at91cap9_reset(void) -+{ -+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -+} -+ -+static void at91cap9_poweroff(void) -+{ -+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * AT91CAP9 processor initialization -+ * -------------------------------------------------------------------- */ -+ -+void __init at91cap9_initialize(unsigned long main_clock) -+{ -+ /* Map peripherals */ -+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); -+ -+ at91_arch_reset = at91cap9_reset; -+ pm_power_off = at91cap9_poweroff; -+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); -+ -+ /* Init clock subsystem */ -+ at91_clock_init(main_clock); -+ -+ /* Register the processor-specific clocks */ -+ at91cap9_register_clocks(); -+ -+ /* Register GPIO subsystem */ -+ at91_gpio_init(at91cap9_gpio, 4); -+} -+ -+/* -------------------------------------------------------------------- -+ * Interrupt initialization -+ * -------------------------------------------------------------------- */ -+ -+/* -+ * The default interrupt priority levels (0 = lowest, 7 = highest). -+ */ -+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { -+ 7, /* Advanced Interrupt Controller (FIQ) */ -+ 7, /* System Peripherals */ -+ 1, /* Parallel IO Controller A, B, C and D */ -+ 0, /* MP Block Peripheral 0 */ -+ 0, /* MP Block Peripheral 1 */ -+ 0, /* MP Block Peripheral 2 */ -+ 0, /* MP Block Peripheral 3 */ -+ 0, /* MP Block Peripheral 4 */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ -+ 0, /* Multimedia Card Interface 0 */ -+ 0, /* Multimedia Card Interface 1 */ -+ 3, /* CAN */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface 0 */ -+ 5, /* Serial Peripheral Interface 1 */ -+ 4, /* Serial Synchronous Controller 0 */ -+ 4, /* Serial Synchronous Controller 1 */ -+ 5, /* AC97 Controller */ -+ 0, /* Timer Counter 0, 1 and 2 */ -+ 0, /* Pulse Width Modulation Controller */ -+ 3, /* Ethernet */ -+ 0, /* Advanced Encryption Standard, Triple DES*/ -+ 0, /* Analog-to-Digital Converter */ -+ 0, /* Image Sensor Interface */ -+ 3, /* LCD Controller */ -+ 0, /* DMA Controller */ -+ 2, /* USB Device Port */ -+ 2, /* USB Host port */ -+ 0, /* Advanced Interrupt Controller (IRQ0) */ -+ 0, /* Advanced Interrupt Controller (IRQ1) */ -+}; -+ -+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -+{ -+ if (!priority) -+ priority = at91cap9_default_irq_priority; -+ -+ /* Initialize the AIC interrupt controller */ -+ at91_aic_init(priority); -+ -+ /* Enable GPIO interrupts */ -+ at91_gpio_irq_setup(); -+} -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-03-01 20:41:49.000000000 +0200 -@@ -0,0 +1,1119 @@ -+/* -+ * arch/arm/mach-at91/at91cap9_devices.c -+ * -+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> -+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -+ * Copyright (C) 2007 Atmel Corporation. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+ -+#include <linux/dma-mapping.h> -+#include <linux/platform_device.h> -+#include <linux/i2c-gpio.h> -+ -+#include <video/atmel_lcdc.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+#include <asm/arch/at91cap9.h> -+#include <asm/arch/at91sam926x_smc.h> -+#include <asm/arch/at91cap9_matrix.h> -+ -+#include "generic.h" -+ -+ -+/* -------------------------------------------------------------------- -+ * USB Host -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -+static u64 ohci_dmamask = DMA_BIT_MASK(32); -+static struct at91_usbh_data usbh_data; -+ -+static struct resource usbh_resources[] = { -+ [0] = { -+ .start = AT91CAP9_UHP_BASE, -+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_UHP, -+ .end = AT91CAP9_ID_UHP, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91_usbh_device = { -+ .name = "at91_ohci", -+ .id = -1, -+ .dev = { -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &usbh_data, -+ }, -+ .resource = usbh_resources, -+ .num_resources = ARRAY_SIZE(usbh_resources), -+}; -+ -+void __init at91_add_device_usbh(struct at91_usbh_data *data) -+{ -+ int i; -+ -+ if (!data) -+ return; -+ -+ /* Enable VBus control for UHP ports */ -+ for (i = 0; i < data->ports; i++) { -+ if (data->vbus_pin[i]) -+ at91_set_gpio_output(data->vbus_pin[i], 0); -+ } -+ -+ usbh_data = *data; -+ platform_device_register(&at91_usbh_device); -+} -+#else -+void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * Ethernet -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -+static u64 eth_dmamask = DMA_BIT_MASK(32); -+static struct at91_eth_data eth_data; -+ -+static struct resource eth_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_EMAC, -+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_EMAC, -+ .end = AT91CAP9_ID_EMAC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_eth_device = { -+ .name = "macb", -+ .id = -1, -+ .dev = { -+ .dma_mask = ð_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = ð_data, -+ }, -+ .resource = eth_resources, -+ .num_resources = ARRAY_SIZE(eth_resources), -+}; -+ -+void __init at91_add_device_eth(struct at91_eth_data *data) -+{ -+ if (!data) -+ return; -+ -+ if (data->phy_irq_pin) { -+ at91_set_gpio_input(data->phy_irq_pin, 0); -+ at91_set_deglitch(data->phy_irq_pin, 1); -+ } -+ -+ /* Pins used for MII and RMII */ -+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ -+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ -+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ -+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ -+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ -+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ -+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ -+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ -+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ -+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ -+ -+ if (!data->is_rmii) { -+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ -+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ -+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ -+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ -+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ -+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ -+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ -+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ -+ } -+ -+ eth_data = *data; -+ platform_device_register(&at91cap9_eth_device); -+} -+#else -+void __init at91_add_device_eth(struct at91_eth_data *data) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * MMC / SD -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -+static u64 mmc_dmamask = DMA_BIT_MASK(32); -+static struct at91_mmc_data mmc0_data, mmc1_data; -+ -+static struct resource mmc0_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_MCI0, -+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_MCI0, -+ .end = AT91CAP9_ID_MCI0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_mmc0_device = { -+ .name = "at91_mci", -+ .id = 0, -+ .dev = { -+ .dma_mask = &mmc_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &mmc0_data, -+ }, -+ .resource = mmc0_resources, -+ .num_resources = ARRAY_SIZE(mmc0_resources), -+}; -+ -+static struct resource mmc1_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_MCI1, -+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_MCI1, -+ .end = AT91CAP9_ID_MCI1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_mmc1_device = { -+ .name = "at91_mci", -+ .id = 1, -+ .dev = { -+ .dma_mask = &mmc_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &mmc1_data, -+ }, -+ .resource = mmc1_resources, -+ .num_resources = ARRAY_SIZE(mmc1_resources), -+}; -+ -+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -+{ -+ if (!data) -+ return; -+ -+ /* input/irq */ -+ if (data->det_pin) { -+ at91_set_gpio_input(data->det_pin, 1); -+ at91_set_deglitch(data->det_pin, 1); -+ } -+ if (data->wp_pin) -+ at91_set_gpio_input(data->wp_pin, 1); -+ if (data->vcc_pin) -+ at91_set_gpio_output(data->vcc_pin, 0); -+ -+ if (mmc_id == 0) { /* MCI0 */ -+ /* CLK */ -+ at91_set_A_periph(AT91_PIN_PA2, 0); -+ -+ /* CMD */ -+ at91_set_A_periph(AT91_PIN_PA1, 1); -+ -+ /* DAT0, maybe DAT1..DAT3 */ -+ at91_set_A_periph(AT91_PIN_PA0, 1); -+ if (data->wire4) { -+ at91_set_A_periph(AT91_PIN_PA3, 1); -+ at91_set_A_periph(AT91_PIN_PA4, 1); -+ at91_set_A_periph(AT91_PIN_PA5, 1); -+ } -+ -+ mmc0_data = *data; -+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk"); -+ platform_device_register(&at91cap9_mmc0_device); -+ } else { /* MCI1 */ -+ /* CLK */ -+ at91_set_A_periph(AT91_PIN_PA16, 0); -+ -+ /* CMD */ -+ at91_set_A_periph(AT91_PIN_PA17, 1); -+ -+ /* DAT0, maybe DAT1..DAT3 */ -+ at91_set_A_periph(AT91_PIN_PA18, 1); -+ if (data->wire4) { -+ at91_set_A_periph(AT91_PIN_PA19, 1); -+ at91_set_A_periph(AT91_PIN_PA20, 1); -+ at91_set_A_periph(AT91_PIN_PA21, 1); -+ } -+ -+ mmc1_data = *data; -+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); -+ platform_device_register(&at91cap9_mmc1_device); -+ } -+} -+#else -+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * NAND / SmartMedia -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -+static struct at91_nand_data nand_data; -+ -+#define NAND_BASE AT91_CHIPSELECT_3 -+ -+static struct resource nand_resources[] = { -+ [0] = { -+ .start = NAND_BASE, -+ .end = NAND_BASE + SZ_256M - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91_BASE_SYS + AT91_ECC, -+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91cap9_nand_device = { -+ .name = "at91_nand", -+ .id = -1, -+ .dev = { -+ .platform_data = &nand_data, -+ }, -+ .resource = nand_resources, -+ .num_resources = ARRAY_SIZE(nand_resources), -+}; -+ -+void __init at91_add_device_nand(struct at91_nand_data *data) -+{ -+ unsigned long csa, mode; -+ -+ if (!data) -+ return; -+ -+ csa = at91_sys_read(AT91_MATRIX_EBICSA); -+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); -+ -+ /* set the bus interface characteristics */ -+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) -+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); -+ -+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) -+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); -+ -+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); -+ -+ if (data->bus_width_16) -+ mode = AT91_SMC_DBW_16; -+ else -+ mode = AT91_SMC_DBW_8; -+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); -+ -+ /* enable pin */ -+ if (data->enable_pin) -+ at91_set_gpio_output(data->enable_pin, 1); -+ -+ /* ready/busy pin */ -+ if (data->rdy_pin) -+ at91_set_gpio_input(data->rdy_pin, 1); -+ -+ /* card detect pin */ -+ if (data->det_pin) -+ at91_set_gpio_input(data->det_pin, 1); -+ -+ nand_data = *data; -+ platform_device_register(&at91cap9_nand_device); -+} -+#else -+void __init at91_add_device_nand(struct at91_nand_data *data) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * TWI (i2c) -+ * -------------------------------------------------------------------- */ -+ -+/* -+ * Prefer the GPIO code since the TWI controller isn't robust -+ * (gets overruns and underruns under load) and can only issue -+ * repeated STARTs in one scenario (the driver doesn't yet handle them). -+ */ -+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) -+ -+static struct i2c_gpio_platform_data pdata = { -+ .sda_pin = AT91_PIN_PB4, -+ .sda_is_open_drain = 1, -+ .scl_pin = AT91_PIN_PB5, -+ .scl_is_open_drain = 1, -+ .udelay = 2, /* ~100 kHz */ -+}; -+ -+static struct platform_device at91cap9_twi_device = { -+ .name = "i2c-gpio", -+ .id = -1, -+ .dev.platform_data = &pdata, -+}; -+ -+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -+{ -+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ -+ at91_set_multi_drive(AT91_PIN_PB4, 1); -+ -+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ -+ at91_set_multi_drive(AT91_PIN_PB5, 1); -+ -+ i2c_register_board_info(0, devices, nr_devices); -+ platform_device_register(&at91cap9_twi_device); -+} -+ -+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) -+ -+static struct resource twi_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_TWI, -+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_TWI, -+ .end = AT91CAP9_ID_TWI, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_twi_device = { -+ .name = "at91_i2c", -+ .id = -1, -+ .resource = twi_resources, -+ .num_resources = ARRAY_SIZE(twi_resources), -+}; -+ -+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -+{ -+ /* pins used for TWI interface */ -+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ -+ at91_set_multi_drive(AT91_PIN_PB4, 1); -+ -+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ -+ at91_set_multi_drive(AT91_PIN_PB5, 1); -+ -+ i2c_register_board_info(0, devices, nr_devices); -+ platform_device_register(&at91cap9_twi_device); -+} -+#else -+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -+#endif -+ -+/* -------------------------------------------------------------------- -+ * SPI -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -+static u64 spi_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource spi0_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_SPI0, -+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_SPI0, -+ .end = AT91CAP9_ID_SPI0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_spi0_device = { -+ .name = "atmel_spi", -+ .id = 0, -+ .dev = { -+ .dma_mask = &spi_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = spi0_resources, -+ .num_resources = ARRAY_SIZE(spi0_resources), -+}; -+ -+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; -+ -+static struct resource spi1_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_SPI1, -+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_SPI1, -+ .end = AT91CAP9_ID_SPI1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_spi1_device = { -+ .name = "atmel_spi", -+ .id = 1, -+ .dev = { -+ .dma_mask = &spi_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = spi1_resources, -+ .num_resources = ARRAY_SIZE(spi1_resources), -+}; -+ -+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; -+ -+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -+{ -+ int i; -+ unsigned long cs_pin; -+ short enable_spi0 = 0; -+ short enable_spi1 = 0; -+ -+ /* Choose SPI chip-selects */ -+ for (i = 0; i < nr_devices; i++) { -+ if (devices[i].controller_data) -+ cs_pin = (unsigned long) devices[i].controller_data; -+ else if (devices[i].bus_num == 0) -+ cs_pin = spi0_standard_cs[devices[i].chip_select]; -+ else -+ cs_pin = spi1_standard_cs[devices[i].chip_select]; -+ -+ if (devices[i].bus_num == 0) -+ enable_spi0 = 1; -+ else -+ enable_spi1 = 1; -+ -+ /* enable chip-select pin */ -+ at91_set_gpio_output(cs_pin, 1); -+ -+ /* pass chip-select pin to driver */ -+ devices[i].controller_data = (void *) cs_pin; -+ } -+ -+ spi_register_board_info(devices, nr_devices); -+ -+ /* Configure SPI bus(es) */ -+ if (enable_spi0) { -+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ -+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ -+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ -+ -+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); -+ platform_device_register(&at91cap9_spi0_device); -+ } -+ if (enable_spi1) { -+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ -+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ -+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ -+ -+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); -+ platform_device_register(&at91cap9_spi1_device); -+ } -+} -+#else -+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * Timer/Counter block -+ * -------------------------------------------------------------------- */ -+ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+static struct resource tcb_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_TCB0, -+ .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_TCB, -+ .end = AT91CAP9_ID_TCB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_tcb_device = { -+ .name = "atmel_tcb", -+ .id = 0, -+ .resource = tcb_resources, -+ .num_resources = ARRAY_SIZE(tcb_resources), -+}; -+ -+static void __init at91_add_device_tc(void) -+{ -+ /* this chip has one clock and irq for all three TC channels */ -+ at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); -+ platform_device_register(&at91cap9_tcb_device); -+} -+#else -+static void __init at91_add_device_tc(void) { } -+#endif -+ -+/* -------------------------------------------------------------------- -+ * RTT -+ * -------------------------------------------------------------------- */ -+ -+static struct resource rtt_resources[] = { -+ { -+ .start = AT91_BASE_SYS + AT91_RTT, -+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91cap9_rtt_device = { -+ .name = "at91_rtt", -+ .id = -1, -+ .resource = rtt_resources, -+ .num_resources = ARRAY_SIZE(rtt_resources), -+}; -+ -+static void __init at91_add_device_rtt(void) -+{ -+ device_init_wakeup(&at91cap9_rtt_device.dev, 1); -+ platform_device_register(&at91cap9_rtt_device); -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * Watchdog -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) -+static struct platform_device at91cap9_wdt_device = { -+ .name = "at91_wdt", -+ .id = -1, -+ .num_resources = 0, -+}; -+ -+static void __init at91_add_device_watchdog(void) -+{ -+ platform_device_register(&at91cap9_wdt_device); -+} -+#else -+static void __init at91_add_device_watchdog(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * AC97 -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) -+static u64 ac97_dmamask = DMA_BIT_MASK(32); -+static struct atmel_ac97_data ac97_data; -+ -+static struct resource ac97_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_AC97C, -+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_AC97C, -+ .end = AT91CAP9_ID_AC97C, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_ac97_device = { -+ .name = "ac97c", -+ .id = 1, -+ .dev = { -+ .dma_mask = &ac97_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &ac97_data, -+ }, -+ .resource = ac97_resources, -+ .num_resources = ARRAY_SIZE(ac97_resources), -+}; -+ -+void __init at91_add_device_ac97(struct atmel_ac97_data *data) -+{ -+ if (!data) -+ return; -+ -+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ -+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ -+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ -+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ -+ -+ /* reset */ -+ if (data->reset_pin) -+ at91_set_gpio_output(data->reset_pin, 0); -+ -+ ac97_data = *data; -+ platform_device_register(&at91cap9_ac97_device); -+} -+#else -+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * LCD Controller -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -+static u64 lcdc_dmamask = DMA_BIT_MASK(32); -+static struct atmel_lcdfb_info lcdc_data; -+ -+static struct resource lcdc_resources[] = { -+ [0] = { -+ .start = AT91CAP9_LCDC_BASE, -+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_LCDC, -+ .end = AT91CAP9_ID_LCDC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91_lcdc_device = { -+ .name = "atmel_lcdfb", -+ .id = 0, -+ .dev = { -+ .dma_mask = &lcdc_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &lcdc_data, -+ }, -+ .resource = lcdc_resources, -+ .num_resources = ARRAY_SIZE(lcdc_resources), -+}; -+ -+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) -+{ -+ if (!data) -+ return; -+ -+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ -+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ -+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ -+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ -+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ -+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ -+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ -+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ -+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ -+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ -+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ -+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ -+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ -+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ -+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ -+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ -+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ -+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ -+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ -+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ -+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ -+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ -+ -+ lcdc_data = *data; -+ platform_device_register(&at91_lcdc_device); -+} -+#else -+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * SSC -- Synchronous Serial Controller -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -+static u64 ssc0_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc0_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_SSC0, -+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_SSC0, -+ .end = AT91CAP9_ID_SSC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_ssc0_device = { -+ .name = "ssc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &ssc0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc0_resources, -+ .num_resources = ARRAY_SIZE(ssc0_resources), -+}; -+ -+static inline void configure_ssc0_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB0, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB1, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB2, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB3, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB4, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB5, 1); -+} -+ -+static u64 ssc1_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc1_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_SSC1, -+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_SSC1, -+ .end = AT91CAP9_ID_SSC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91cap9_ssc1_device = { -+ .name = "ssc", -+ .id = 1, -+ .dev = { -+ .dma_mask = &ssc1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc1_resources, -+ .num_resources = ARRAY_SIZE(ssc1_resources), -+}; -+ -+static inline void configure_ssc1_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB6, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB7, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB8, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB9, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB10, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB11, 1); -+} -+ -+/* -+ * SSC controllers are accessed through library code, instead of any -+ * kind of all-singing/all-dancing driver. For example one could be -+ * used by a particular I2S audio codec's driver, while another one -+ * on the same system might be used by a custom data capture driver. -+ */ -+void __init at91_add_device_ssc(unsigned id, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ /* -+ * NOTE: caller is responsible for passing information matching -+ * "pins" to whatever will be using each particular controller. -+ */ -+ switch (id) { -+ case AT91CAP9_ID_SSC0: -+ pdev = &at91cap9_ssc0_device; -+ configure_ssc0_pins(pins); -+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); -+ break; -+ case AT91CAP9_ID_SSC1: -+ pdev = &at91cap9_ssc1_device; -+ configure_ssc1_pins(pins); -+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); -+ break; -+ default: -+ return; -+ } -+ -+ platform_device_register(pdev); -+} -+ -+#else -+void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * UART -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_SERIAL_ATMEL) -+static struct resource dbgu_resources[] = { -+ [0] = { -+ .start = AT91_VA_BASE_SYS + AT91_DBGU, -+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91_ID_SYS, -+ .end = AT91_ID_SYS, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct atmel_uart_data dbgu_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -+}; -+ -+static u64 dbgu_dmamask = DMA_BIT_MASK(32); -+ -+static struct platform_device at91cap9_dbgu_device = { -+ .name = "atmel_usart", -+ .id = 0, -+ .dev = { -+ .dma_mask = &dbgu_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dbgu_data, -+ }, -+ .resource = dbgu_resources, -+ .num_resources = ARRAY_SIZE(dbgu_resources), -+}; -+ -+static inline void configure_dbgu_pins(void) -+{ -+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -+} -+ -+static struct resource uart0_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_US0, -+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_US0, -+ .end = AT91CAP9_ID_US0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct atmel_uart_data uart0_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+ -+static u64 uart0_dmamask = DMA_BIT_MASK(32); -+ -+static struct platform_device at91cap9_uart0_device = { -+ .name = "atmel_usart", -+ .id = 1, -+ .dev = { -+ .dma_mask = &uart0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart0_data, -+ }, -+ .resource = uart0_resources, -+ .num_resources = ARRAY_SIZE(uart0_resources), -+}; -+ -+static inline void configure_usart0_pins(unsigned pins) -+{ -+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ -+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ -+} -+ -+static struct resource uart1_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_US1, -+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_US1, -+ .end = AT91CAP9_ID_US1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct atmel_uart_data uart1_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+ -+static u64 uart1_dmamask = DMA_BIT_MASK(32); -+ -+static struct platform_device at91cap9_uart1_device = { -+ .name = "atmel_usart", -+ .id = 2, -+ .dev = { -+ .dma_mask = &uart1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart1_data, -+ }, -+ .resource = uart1_resources, -+ .num_resources = ARRAY_SIZE(uart1_resources), -+}; -+ -+static inline void configure_usart1_pins(unsigned pins) -+{ -+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ -+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -+} -+ -+static struct resource uart2_resources[] = { -+ [0] = { -+ .start = AT91CAP9_BASE_US2, -+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91CAP9_ID_US2, -+ .end = AT91CAP9_ID_US2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct atmel_uart_data uart2_data = { -+ .use_dma_tx = 1, -+ .use_dma_rx = 1, -+}; -+ -+static u64 uart2_dmamask = DMA_BIT_MASK(32); -+ -+static struct platform_device at91cap9_uart2_device = { -+ .name = "atmel_usart", -+ .id = 3, -+ .dev = { -+ .dma_mask = &uart2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart2_data, -+ }, -+ .resource = uart2_resources, -+ .num_resources = ARRAY_SIZE(uart2_resources), -+}; -+ -+static inline void configure_usart2_pins(unsigned pins) -+{ -+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ -+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -+} -+ -+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -+struct platform_device *atmel_default_console_device; /* the serial console device */ -+ -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: /* DBGU */ -+ pdev = &at91cap9_dbgu_device; -+ configure_dbgu_pins(); -+ at91_clock_associate("mck", &pdev->dev, "usart"); -+ break; -+ case AT91CAP9_ID_US0: -+ pdev = &at91cap9_uart0_device; -+ configure_usart0_pins(pins); -+ at91_clock_associate("usart0_clk", &pdev->dev, "usart"); -+ break; -+ case AT91CAP9_ID_US1: -+ pdev = &at91cap9_uart1_device; -+ configure_usart1_pins(pins); -+ at91_clock_associate("usart1_clk", &pdev->dev, "usart"); -+ break; -+ case AT91CAP9_ID_US2: -+ pdev = &at91cap9_uart2_device; -+ configure_usart2_pins(pins); -+ at91_clock_associate("usart2_clk", &pdev->dev, "usart"); -+ break; -+ default: -+ return; -+ } -+ pdev->id = portnr; /* update to mapped ID */ -+ -+ if (portnr < ATMEL_MAX_UART) -+ at91_uarts[portnr] = pdev; -+} -+ -+void __init at91_set_serial_console(unsigned portnr) -+{ -+ if (portnr < ATMEL_MAX_UART) -+ atmel_default_console_device = at91_uarts[portnr]; -+ if (!atmel_default_console_device) -+ printk(KERN_INFO "AT91: No default serial console defined.\n"); -+} -+ -+void __init at91_add_device_serial(void) -+{ -+ int i; -+ -+ for (i = 0; i < ATMEL_MAX_UART; i++) { -+ if (at91_uarts[i]) -+ platform_device_register(at91_uarts[i]); -+ } -+} -+#else -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -+void __init at91_set_serial_console(unsigned portnr) {} -+void __init at91_add_device_serial(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- */ -+/* -+ * These devices are always present and don't need any board-specific -+ * setup. -+ */ -+static int __init at91_add_standard_devices(void) -+{ -+ at91_add_device_rtt(); -+ at91_add_device_watchdog(); -+ at91_add_device_tc(); -+ return 0; -+} -+ -+arch_initcall(at91_add_standard_devices); -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200.c linux-2.6/arch/arm/mach-at91/at91rm9200.c ---- linux-2.6.24/arch/arm/mach-at91/at91rm9200.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91rm9200.c 2008-03-01 18:46:49.000000000 +0200 -@@ -301,28 +301,28 @@ - static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C */ -- 0, /* Parallel IO Controller D */ -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -- 6, /* USART 3 */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C */ -+ 1, /* Parallel IO Controller D */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ -+ 5, /* USART 3 */ - 0, /* Multimedia Card Interface */ -- 4, /* USB Device Port */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface */ -- 5, /* Serial Synchronous Controller 0 */ -- 5, /* Serial Synchronous Controller 1 */ -- 5, /* Serial Synchronous Controller 2 */ -+ 2, /* USB Device Port */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface */ -+ 4, /* Serial Synchronous Controller 0 */ -+ 4, /* Serial Synchronous Controller 1 */ -+ 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 3, /* Ethernet MAC */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 18:50:43.000000000 +0200 -@@ -13,6 +13,7 @@ - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/i2c-gpio.h> - -@@ -29,7 +30,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) --static u64 ohci_dmamask = 0xffffffffUL; -+static u64 ohci_dmamask = DMA_BIT_MASK(32); - static struct at91_usbh_data usbh_data; - - static struct resource usbh_resources[] = { -@@ -50,7 +51,7 @@ - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, -@@ -125,7 +126,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) --static u64 eth_dmamask = 0xffffffffUL; -+static u64 eth_dmamask = DMA_BIT_MASK(32); - static struct at91_eth_data eth_data; - - static struct resource eth_resources[] = { -@@ -146,7 +147,7 @@ - .id = -1, - .dev = { - .dma_mask = ð_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, -@@ -285,7 +286,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) --static u64 mmc_dmamask = 0xffffffffUL; -+static u64 mmc_dmamask = DMA_BIT_MASK(32); - static struct at91_mmc_data mmc_data; - - static struct resource mmc_resources[] = { -@@ -306,7 +307,7 @@ - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, -@@ -375,7 +376,7 @@ - static struct resource nand_resources[] = { - { - .start = NAND_BASE, -- .end = NAND_BASE + SZ_8M - 1, -+ .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } - }; -@@ -512,8 +513,19 @@ - * SPI - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) --static u64 spi_dmamask = 0xffffffffUL; -+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */ -+#define SPI_DEVNAME "at91_spi" -+ -+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */ -+#define SPI_DEVNAME "at91_spi" -+ -+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */ -+#define SPI_DEVNAME "atmel_spi" -+ -+#endif -+ -+#ifdef SPI_DEVNAME -+static u64 spi_dmamask = DMA_BIT_MASK(32); - - static struct resource spi_resources[] = { - [0] = { -@@ -529,11 +541,11 @@ - }; - - static struct platform_device at91rm9200_spi_device = { -- .name = "atmel_spi", -+ .name = SPI_DEVNAME, - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi_resources, - .num_resources = ARRAY_SIZE(spi_resources), -@@ -557,8 +569,17 @@ - else - cs_pin = spi_standard_cs[devices[i].chip_select]; - -- /* enable chip-select pin */ -- at91_set_gpio_output(cs_pin, 1); -+ if (devices[i].chip_select == 0) /* for CS0 errata */ -+ at91_set_A_periph(cs_pin, 0); -+ else -+ at91_set_gpio_output(cs_pin, 1); -+ -+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) -+ /* -+ * Force peripheral mode when using the legacy SPI driver. -+ */ -+ at91_set_A_periph(cs_pin, 0); -+#endif - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; -@@ -573,6 +594,90 @@ - - - /* -------------------------------------------------------------------- -+ * Timer/Counter blocks -+ * -------------------------------------------------------------------- */ -+ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+static struct resource tcb0_resources[] = { -+ [0] = { -+ .start = AT91RM9200_BASE_TCB0, -+ .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_TC0, -+ .end = AT91RM9200_ID_TC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = AT91RM9200_ID_TC1, -+ .end = AT91RM9200_ID_TC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = AT91RM9200_ID_TC2, -+ .end = AT91RM9200_ID_TC2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_tcb0_device = { -+ .name = "atmel_tcb", -+ .id = 0, -+ .resource = tcb0_resources, -+ .num_resources = ARRAY_SIZE(tcb0_resources), -+}; -+ -+static struct resource tcb1_resources[] = { -+ [0] = { -+ .start = AT91RM9200_BASE_TCB1, -+ .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_TC3, -+ .end = AT91RM9200_ID_TC3, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = AT91RM9200_ID_TC4, -+ .end = AT91RM9200_ID_TC4, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = AT91RM9200_ID_TC5, -+ .end = AT91RM9200_ID_TC5, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_tcb1_device = { -+ .name = "atmel_tcb", -+ .id = 1, -+ .resource = tcb1_resources, -+ .num_resources = ARRAY_SIZE(tcb1_resources), -+}; -+ -+static void __init at91_add_device_tc(void) -+{ -+ /* this chip has a separate clock and irq for each TC channel */ -+ at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); -+ at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); -+ at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); -+ platform_device_register(&at91rm9200_tcb0_device); -+ -+ at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); -+ at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); -+ at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); -+ platform_device_register(&at91rm9200_tcb1_device); -+} -+#else -+static void __init at91_add_device_tc(void) { } -+#endif -+ -+ -+/* -------------------------------------------------------------------- - * RTC - * -------------------------------------------------------------------- */ - -@@ -585,6 +690,7 @@ - - static void __init at91_add_device_rtc(void) - { -+ device_init_wakeup(&at91rm9200_rtc_device.dev, 1); - platform_device_register(&at91rm9200_rtc_device); - } - #else -@@ -613,24 +719,175 @@ - - - /* -------------------------------------------------------------------- -- * LEDs -+ * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_LEDS) --u8 at91_leds_cpu; --u8 at91_leds_timer; -+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -+static u64 ssc0_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc0_resources[] = { -+ [0] = { -+ .start = AT91RM9200_BASE_SSC0, -+ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_SSC0, -+ .end = AT91RM9200_ID_SSC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_ssc0_device = { -+ .name = "ssc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &ssc0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc0_resources, -+ .num_resources = ARRAY_SIZE(ssc0_resources), -+}; -+ -+static inline void configure_ssc0_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB0, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB1, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB2, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB3, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB4, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB5, 1); -+} -+ -+static u64 ssc1_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc1_resources[] = { -+ [0] = { -+ .start = AT91RM9200_BASE_SSC1, -+ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_SSC1, -+ .end = AT91RM9200_ID_SSC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_ssc1_device = { -+ .name = "ssc", -+ .id = 1, -+ .dev = { -+ .dma_mask = &ssc1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc1_resources, -+ .num_resources = ARRAY_SIZE(ssc1_resources), -+}; - --void __init at91_init_leds(u8 cpu_led, u8 timer_led) -+static inline void configure_ssc1_pins(unsigned pins) - { -- /* Enable GPIO to access the LEDs */ -- at91_set_gpio_output(cpu_led, 1); -- at91_set_gpio_output(timer_led, 1); -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB6, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB7, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB8, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB9, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB10, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB11, 1); -+} -+ -+static u64 ssc2_dmamask = DMA_BIT_MASK(32); - -- at91_leds_cpu = cpu_led; -- at91_leds_timer = timer_led; -+static struct resource ssc2_resources[] = { -+ [0] = { -+ .start = AT91RM9200_BASE_SSC2, -+ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91RM9200_ID_SSC2, -+ .end = AT91RM9200_ID_SSC2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91rm9200_ssc2_device = { -+ .name = "ssc", -+ .id = 2, -+ .dev = { -+ .dma_mask = &ssc2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc2_resources, -+ .num_resources = ARRAY_SIZE(ssc2_resources), -+}; -+ -+static inline void configure_ssc2_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB12, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB13, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB14, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB15, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB16, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB17, 1); - } -+ -+/* -+ * SSC controllers are accessed through library code, instead of any -+ * kind of all-singing/all-dancing driver. For example one could be -+ * used by a particular I2S audio codec's driver, while another one -+ * on the same system might be used by a custom data capture driver. -+ */ -+void __init at91_add_device_ssc(unsigned id, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ /* -+ * NOTE: caller is responsible for passing information matching -+ * "pins" to whatever will be using each particular controller. -+ */ -+ switch (id) { -+ case AT91RM9200_ID_SSC0: -+ pdev = &at91rm9200_ssc0_device; -+ configure_ssc0_pins(pins); -+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); -+ break; -+ case AT91RM9200_ID_SSC1: -+ pdev = &at91rm9200_ssc1_device; -+ configure_ssc1_pins(pins); -+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); -+ break; -+ case AT91RM9200_ID_SSC2: -+ pdev = &at91rm9200_ssc2_device; -+ configure_ssc2_pins(pins); -+ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); -+ break; -+ default: -+ return; -+ } -+ -+ platform_device_register(pdev); -+} -+ - #else --void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -+void __init at91_add_device_ssc(unsigned id, unsigned pins) {} - #endif - - -@@ -657,13 +914,15 @@ - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), - }; -+static u64 dbgu_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91rm9200_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { -- .platform_data = &dbgu_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &dbgu_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -@@ -692,29 +951,36 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart0_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91rm9200_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { -- .platform_data = &uart0_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), - }; - --static inline void configure_usart0_pins(void) -+static inline void configure_usart0_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ -- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ - -- /* -- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. -- * We need to drive the pin manually. Default is off (RTS is active low). -- */ -- at91_set_gpio_output(AT91_PIN_PA21, 1); -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ -+ -+ if (pins & ATMEL_UART_RTS) { -+ /* -+ * AT91RM9200 Errata #39 - RTS0 is not internally connected -+ * to PA21, so we need to drive the pin manually. -+ * Default is off (RTS is active low). -+ */ -+ at91_set_gpio_output(AT91_PIN_PA21, 1); -+ } - } - - static struct resource uart1_resources[] = { -@@ -734,28 +1000,37 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart1_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91rm9200_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { -- .platform_data = &uart1_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), - }; - --static inline void configure_usart1_pins(void) -+static inline void configure_usart1_pins(unsigned pins) - { -- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ -- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ - at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ -- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ -- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ -- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ -- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ -+ -+ if (pins & ATMEL_UART_RI) -+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ -+ if (pins & ATMEL_UART_DTR) -+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ -+ if (pins & ATMEL_UART_DCD) -+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ -+ if (pins & ATMEL_UART_DSR) -+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ - } - - static struct resource uart2_resources[] = { -@@ -775,22 +1050,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart2_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91rm9200_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { -- .platform_data = &uart2_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), - }; - --static inline void configure_usart2_pins(void) -+static inline void configure_usart2_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ - at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ -+ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */ - } - - static struct resource uart3_resources[] = { -@@ -810,28 +1092,35 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart3_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91rm9200_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { -- .platform_data = &uart3_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart3_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), - }; - --static inline void configure_usart3_pins(void) -+static inline void configure_usart3_pins(unsigned pins) - { - at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ - at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ -+ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ - } - --struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* UARTs to use */ - struct platform_device *atmel_default_console_device; /* the serial console device */ - --void __init at91_init_serial(struct at91_uart_config *config) -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) - { - int i; - -@@ -839,22 +1128,22 @@ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: -- configure_usart0_pins(); -+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: -- configure_usart1_pins(); -+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: -- configure_usart2_pins(); -+ configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: -- configure_usart3_pins(); -+ configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; -@@ -876,6 +1165,53 @@ - printk(KERN_INFO "AT91: No default serial console defined.\n"); - } - -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: /* DBGU */ -+ pdev = &at91rm9200_dbgu_device; -+ configure_dbgu_pins(); -+ at91_clock_associate("mck", &pdev->dev, "usart"); -+ break; -+ case AT91RM9200_ID_US0: -+ pdev = &at91rm9200_uart0_device; -+ configure_usart0_pins(pins); -+ at91_clock_associate("usart0_clk", &pdev->dev, "usart"); -+ break; -+ case AT91RM9200_ID_US1: -+ pdev = &at91rm9200_uart1_device; -+ configure_usart1_pins(pins); -+ at91_clock_associate("usart1_clk", &pdev->dev, "usart"); -+ break; -+ case AT91RM9200_ID_US2: -+ pdev = &at91rm9200_uart2_device; -+ configure_usart2_pins(pins); -+ at91_clock_associate("usart2_clk", &pdev->dev, "usart"); -+ break; -+ case AT91RM9200_ID_US3: -+ pdev = &at91rm9200_uart3_device; -+ configure_usart3_pins(pins); -+ at91_clock_associate("usart3_clk", &pdev->dev, "usart"); -+ break; -+ default: -+ return; -+ } -+ pdev->id = portnr; /* update to mapped ID */ -+ -+ if (portnr < ATMEL_MAX_UART) -+ at91_uarts[portnr] = pdev; -+} -+ -+void __init at91_set_serial_console(unsigned portnr) -+{ -+ if (portnr < ATMEL_MAX_UART) -+ atmel_default_console_device = at91_uarts[portnr]; -+ if (!atmel_default_console_device) -+ printk(KERN_INFO "AT91: No default serial console defined.\n"); -+} -+ - void __init at91_add_device_serial(void) - { - int i; -@@ -886,7 +1222,9 @@ - } - } - #else --void __init at91_init_serial(struct at91_uart_config *config) {} -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -+void __init at91_set_serial_console(unsigned portnr) {} - void __init at91_add_device_serial(void) {} - #endif - -@@ -901,6 +1239,7 @@ - { - at91_add_device_rtc(); - at91_add_device_watchdog(); -+ at91_add_device_tc(); - return 0; - } - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c ---- linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2007-12-31 15:04:28.000000000 +0200 -@@ -136,8 +136,6 @@ - u32 alm; - int status = 0; - -- BUG_ON(delta < 2); -- - /* Use "raw" primitives so we behave correctly on RT kernels. */ - raw_local_irq_save(flags); - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9260.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-03-01 19:03:06.000000000 +0200 -@@ -11,6 +11,7 @@ - */ - - #include <linux/module.h> -+#include <linux/pm.h> - - #include <asm/mach/arch.h> - #include <asm/mach/map.h> -@@ -18,6 +19,7 @@ - #include <asm/arch/at91sam9260.h> - #include <asm/arch/at91_pmc.h> - #include <asm/arch/at91_rstc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - #include "clock.h" -@@ -267,6 +269,11 @@ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); - } - -+static void at91sam9260_poweroff(void) -+{ -+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -+} -+ - - /* -------------------------------------------------------------------- - * AT91SAM9260 processor initialization -@@ -304,6 +311,7 @@ - iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); - - at91_arch_reset = at91sam9260_reset; -+ pm_power_off = at91sam9260_poweroff; - at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) - | (1 << AT91SAM9260_ID_IRQ2); - -@@ -327,30 +335,30 @@ - static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C */ - 0, /* Analog-to-Digital Converter */ -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ -- 4, /* USB Device Port */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface 0 */ -- 6, /* Serial Peripheral Interface 1 */ -+ 2, /* USB Device Port */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface 0 */ -+ 5, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller */ - 0, - 0, - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 3, /* Ethernet */ - 0, /* Image Sensor Interface */ -- 6, /* USART 3 */ -- 6, /* USART 4 */ -- 6, /* USART 5 */ -+ 5, /* USART 3 */ -+ 5, /* USART 4 */ -+ 5, /* USART 5 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:09:03.000000000 +0200 -@@ -12,13 +12,14 @@ - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/i2c-gpio.h> - - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> - #include <asm/arch/at91sam9260.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91sam926x_smc.h> - #include <asm/arch/at91sam9260_matrix.h> - - #include "generic.h" -@@ -29,7 +30,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) --static u64 ohci_dmamask = 0xffffffffUL; -+static u64 ohci_dmamask = DMA_BIT_MASK(32); - static struct at91_usbh_data usbh_data; - - static struct resource usbh_resources[] = { -@@ -50,7 +51,7 @@ - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, -@@ -125,7 +126,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) --static u64 eth_dmamask = 0xffffffffUL; -+static u64 eth_dmamask = DMA_BIT_MASK(32); - static struct at91_eth_data eth_data; - - static struct resource eth_resources[] = { -@@ -146,7 +147,7 @@ - .id = -1, - .dev = { - .dma_mask = ð_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, -@@ -199,7 +200,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) --static u64 mmc_dmamask = 0xffffffffUL; -+static u64 mmc_dmamask = DMA_BIT_MASK(32); - static struct at91_mmc_data mmc_data; - - static struct resource mmc_resources[] = { -@@ -220,7 +221,7 @@ - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, -@@ -287,9 +288,14 @@ - #define NAND_BASE AT91_CHIPSELECT_3 - - static struct resource nand_resources[] = { -- { -+ [0] = { - .start = NAND_BASE, -- .end = NAND_BASE + SZ_8M - 1, -+ .end = NAND_BASE + SZ_256M - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91_BASE_SYS + AT91_ECC, -+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } - }; -@@ -312,7 +318,7 @@ - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); -- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); -+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* set the bus interface characteristics */ - at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) -@@ -431,7 +437,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) --static u64 spi_dmamask = 0xffffffffUL; -+static u64 spi_dmamask = DMA_BIT_MASK(32); - - static struct resource spi0_resources[] = { - [0] = { -@@ -451,7 +457,7 @@ - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -@@ -477,7 +483,7 @@ - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -@@ -539,24 +545,211 @@ - - - /* -------------------------------------------------------------------- -- * LEDs -+ * Timer/Counter blocks - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_LEDS) --u8 at91_leds_cpu; --u8 at91_leds_timer; -+#ifdef CONFIG_ATMEL_TCLIB -+ -+static struct resource tcb0_resources[] = { -+ [0] = { -+ .start = AT91SAM9260_BASE_TCB0, -+ .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9260_ID_TC0, -+ .end = AT91SAM9260_ID_TC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = AT91SAM9260_ID_TC1, -+ .end = AT91SAM9260_ID_TC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = AT91SAM9260_ID_TC2, -+ .end = AT91SAM9260_ID_TC2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9260_tcb0_device = { -+ .name = "atmel_tcb", -+ .id = 0, -+ .resource = tcb0_resources, -+ .num_resources = ARRAY_SIZE(tcb0_resources), -+}; -+ -+static struct resource tcb1_resources[] = { -+ [0] = { -+ .start = AT91SAM9260_BASE_TCB1, -+ .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9260_ID_TC3, -+ .end = AT91SAM9260_ID_TC3, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = AT91SAM9260_ID_TC4, -+ .end = AT91SAM9260_ID_TC4, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = AT91SAM9260_ID_TC5, -+ .end = AT91SAM9260_ID_TC5, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9260_tcb1_device = { -+ .name = "atmel_tcb", -+ .id = 1, -+ .resource = tcb1_resources, -+ .num_resources = ARRAY_SIZE(tcb1_resources), -+}; - --void __init at91_init_leds(u8 cpu_led, u8 timer_led) -+static void __init at91_add_device_tc(void) - { -- /* Enable GPIO to access the LEDs */ -- at91_set_gpio_output(cpu_led, 1); -- at91_set_gpio_output(timer_led, 1); -+ /* this chip has a separate clock and irq for each TC channel */ -+ at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); -+ at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); -+ at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); -+ platform_device_register(&at91sam9260_tcb0_device); -+ -+ at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); -+ at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); -+ at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); -+ platform_device_register(&at91sam9260_tcb1_device); -+} -+#else -+static void __init at91_add_device_tc(void) { } -+#endif - -- at91_leds_cpu = cpu_led; -- at91_leds_timer = timer_led; -+ -+/* -------------------------------------------------------------------- -+ * RTT -+ * -------------------------------------------------------------------- */ -+ -+static struct resource rtt_resources[] = { -+ { -+ .start = AT91_BASE_SYS + AT91_RTT, -+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91sam9260_rtt_device = { -+ .name = "at91_rtt", -+ .id = -1, -+ .resource = rtt_resources, -+ .num_resources = ARRAY_SIZE(rtt_resources), -+}; -+ -+static void __init at91_add_device_rtt(void) -+{ -+ device_init_wakeup(&at91sam9260_rtt_device.dev, 1); -+ platform_device_register(&at91sam9260_rtt_device); -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * Watchdog -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) -+static struct platform_device at91sam9260_wdt_device = { -+ .name = "at91_wdt", -+ .id = -1, -+ .num_resources = 0, -+}; -+ -+static void __init at91_add_device_watchdog(void) -+{ -+ platform_device_register(&at91sam9260_wdt_device); - } - #else --void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -+static void __init at91_add_device_watchdog(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * SSC -- Synchronous Serial Controller -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -+static u64 ssc_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc_resources[] = { -+ [0] = { -+ .start = AT91SAM9260_BASE_SSC, -+ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9260_ID_SSC, -+ .end = AT91SAM9260_ID_SSC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9260_ssc_device = { -+ .name = "ssc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &ssc_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc_resources, -+ .num_resources = ARRAY_SIZE(ssc_resources), -+}; -+ -+static inline void configure_ssc_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB17, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB16, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB18, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB19, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB20, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB21, 1); -+} -+ -+/* -+ * SSC controllers are accessed through library code, instead of any -+ * kind of all-singing/all-dancing driver. For example one could be -+ * used by a particular I2S audio codec's driver, while another one -+ * on the same system might be used by a custom data capture driver. -+ */ -+void __init at91_add_device_ssc(unsigned id, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ /* -+ * NOTE: caller is responsible for passing information matching -+ * "pins" to whatever will be using each particular controller. -+ */ -+ switch (id) { -+ case AT91SAM9260_ID_SSC: -+ pdev = &at91sam9260_ssc_device; -+ configure_ssc_pins(pins); -+ at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); -+ break; -+ default: -+ return; -+ } -+ -+ platform_device_register(pdev); -+} -+ -+#else -+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {} - #endif - - -@@ -582,13 +775,15 @@ - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), - }; -+static u64 dbgu_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { -- .platform_data = &dbgu_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &dbgu_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -@@ -617,28 +812,37 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart0_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { -- .platform_data = &uart0_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), - }; - --static inline void configure_usart0_pins(void) -+static inline void configure_usart0_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ -- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ -- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ -- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ -- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ -- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ -- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ -+ if (pins & ATMEL_UART_DTR) -+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ -+ if (pins & ATMEL_UART_DSR) -+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ -+ if (pins & ATMEL_UART_DCD) -+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ -+ if (pins & ATMEL_UART_RI) -+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ - } - - static struct resource uart1_resources[] = { -@@ -658,24 +862,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart1_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { -- .platform_data = &uart1_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), - }; - --static inline void configure_usart1_pins(void) -+static inline void configure_usart1_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ -- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ -- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ - } - - static struct resource uart2_resources[] = { -@@ -695,22 +904,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart2_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { -- .platform_data = &uart2_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), - }; - --static inline void configure_usart2_pins(void) -+static inline void configure_usart2_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ - } - - static struct resource uart3_resources[] = { -@@ -730,22 +946,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart3_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { -- .platform_data = &uart3_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart3_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), - }; - --static inline void configure_usart3_pins(void) -+static inline void configure_usart3_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ - } - - static struct resource uart4_resources[] = { -@@ -765,13 +988,15 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart4_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_uart4_device = { - .name = "atmel_usart", - .id = 5, - .dev = { -- .platform_data = &uart4_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart4_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart4_data, - }, - .resource = uart4_resources, - .num_resources = ARRAY_SIZE(uart4_resources), -@@ -800,13 +1025,15 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart5_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9260_uart5_device = { - .name = "atmel_usart", - .id = 6, - .dev = { -- .platform_data = &uart5_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart5_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart5_data, - }, - .resource = uart5_resources, - .num_resources = ARRAY_SIZE(uart5_resources), -@@ -818,10 +1045,10 @@ - at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ - } - --struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - struct platform_device *atmel_default_console_device; /* the serial console device */ - --void __init at91_init_serial(struct at91_uart_config *config) -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) - { - int i; - -@@ -829,22 +1056,22 @@ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: -- configure_usart0_pins(); -+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91sam9260_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); - break; - case 1: -- configure_usart1_pins(); -+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9260_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); - break; - case 2: -- configure_usart2_pins(); -+ configure_usart2_pins(0); - at91_uarts[i] = &at91sam9260_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); - break; - case 3: -- configure_usart3_pins(); -+ configure_usart3_pins(0); - at91_uarts[i] = &at91sam9260_uart3_device; - at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); - break; -@@ -876,6 +1103,63 @@ - printk(KERN_INFO "AT91: No default serial console defined.\n"); - } - -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: /* DBGU */ -+ pdev = &at91sam9260_dbgu_device; -+ configure_dbgu_pins(); -+ at91_clock_associate("mck", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9260_ID_US0: -+ pdev = &at91sam9260_uart0_device; -+ configure_usart0_pins(pins); -+ at91_clock_associate("usart0_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9260_ID_US1: -+ pdev = &at91sam9260_uart1_device; -+ configure_usart1_pins(pins); -+ at91_clock_associate("usart1_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9260_ID_US2: -+ pdev = &at91sam9260_uart2_device; -+ configure_usart2_pins(pins); -+ at91_clock_associate("usart2_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9260_ID_US3: -+ pdev = &at91sam9260_uart3_device; -+ configure_usart3_pins(pins); -+ at91_clock_associate("usart3_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9260_ID_US4: -+ pdev = &at91sam9260_uart4_device; -+ configure_usart4_pins(); -+ at91_clock_associate("usart4_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9260_ID_US5: -+ pdev = &at91sam9260_uart5_device; -+ configure_usart5_pins(); -+ at91_clock_associate("usart5_clk", &pdev->dev, "usart"); -+ break; -+ default: -+ return; -+ } -+ pdev->id = portnr; /* update to mapped ID */ -+ -+ if (portnr < ATMEL_MAX_UART) -+ at91_uarts[portnr] = pdev; -+} -+ -+void __init at91_set_serial_console(unsigned portnr) -+{ -+ if (portnr < ATMEL_MAX_UART) -+ atmel_default_console_device = at91_uarts[portnr]; -+ if (!atmel_default_console_device) -+ printk(KERN_INFO "AT91: No default serial console defined.\n"); -+} -+ - void __init at91_add_device_serial(void) - { - int i; -@@ -886,7 +1170,9 @@ - } - } - #else --void __init at91_init_serial(struct at91_uart_config *config) {} -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -+void __init at91_set_serial_console(unsigned portnr) {} - void __init at91_add_device_serial(void) {} - #endif - -@@ -898,6 +1184,9 @@ - */ - static int __init at91_add_standard_devices(void) - { -+ at91_add_device_rtt(); -+ at91_add_device_watchdog(); -+ at91_add_device_tc(); - return 0; - } - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9261.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-03-01 19:03:29.000000000 +0200 -@@ -11,12 +11,14 @@ - */ - - #include <linux/module.h> -+#include <linux/pm.h> - - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - #include <asm/arch/at91sam9261.h> - #include <asm/arch/at91_pmc.h> - #include <asm/arch/at91_rstc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - #include "clock.h" -@@ -245,6 +247,11 @@ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); - } - -+static void at91sam9261_poweroff(void) -+{ -+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -+} -+ - - /* -------------------------------------------------------------------- - * AT91SAM9261 processor initialization -@@ -256,6 +263,7 @@ - iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); - - at91_arch_reset = at91sam9261_reset; -+ pm_power_off = at91sam9261_poweroff; - at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) - | (1 << AT91SAM9261_ID_IRQ2); - -@@ -279,25 +287,25 @@ - static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C */ - 0, -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ -- 4, /* USB Device Port */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface 0 */ -- 6, /* Serial Peripheral Interface 1 */ -- 5, /* Serial Synchronous Controller 0 */ -- 5, /* Serial Synchronous Controller 1 */ -- 5, /* Serial Synchronous Controller 2 */ -+ 2, /* USB Device Port */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface 0 */ -+ 5, /* Serial Peripheral Interface 1 */ -+ 4, /* Serial Synchronous Controller 0 */ -+ 4, /* Serial Synchronous Controller 1 */ -+ 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 3, /* LCD Controller */ - 0, - 0, -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:09:18.000000000 +0200 -@@ -13,6 +13,7 @@ - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/i2c-gpio.h> - -@@ -23,7 +24,7 @@ - #include <asm/arch/gpio.h> - #include <asm/arch/at91sam9261.h> - #include <asm/arch/at91sam9261_matrix.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91sam926x_smc.h> - - #include "generic.h" - -@@ -33,7 +34,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) --static u64 ohci_dmamask = 0xffffffffUL; -+static u64 ohci_dmamask = DMA_BIT_MASK(32); - static struct at91_usbh_data usbh_data; - - static struct resource usbh_resources[] = { -@@ -54,7 +55,7 @@ - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, -@@ -106,8 +107,6 @@ - - void __init at91_add_device_udc(struct at91_udc_data *data) - { -- unsigned long x; -- - if (!data) - return; - -@@ -116,9 +115,7 @@ - at91_set_deglitch(data->vbus_pin, 1); - } - -- /* Pullup pin is handled internally */ -- x = at91_sys_read(AT91_MATRIX_USBPUCR); -- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); -+ /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91sam9261_udc_device); -@@ -132,7 +129,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) --static u64 mmc_dmamask = 0xffffffffUL; -+static u64 mmc_dmamask = DMA_BIT_MASK(32); - static struct at91_mmc_data mmc_data; - - static struct resource mmc_resources[] = { -@@ -153,7 +150,7 @@ - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, -@@ -232,7 +229,7 @@ - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); -- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); -+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* set the bus interface characteristics */ - at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) -@@ -354,7 +351,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) --static u64 spi_dmamask = 0xffffffffUL; -+static u64 spi_dmamask = DMA_BIT_MASK(32); - - static struct resource spi0_resources[] = { - [0] = { -@@ -374,7 +371,7 @@ - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -@@ -400,7 +397,7 @@ - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -@@ -466,7 +463,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) --static u64 lcdc_dmamask = 0xffffffffUL; -+static u64 lcdc_dmamask = DMA_BIT_MASK(32); - static struct atmel_lcdfb_info lcdc_data; - - static struct resource lcdc_resources[] = { -@@ -494,7 +491,7 @@ - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, -@@ -507,6 +504,17 @@ - return; - } - -+#if defined(CONFIG_FB_ATMEL_STN) -+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ -+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ -+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ -+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ -+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ -+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */ -+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */ -+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ -+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ -+#else - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ -@@ -529,6 +537,7 @@ - at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ - at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ -+#endif - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -@@ -539,24 +548,270 @@ - - - /* -------------------------------------------------------------------- -- * LEDs -+ * Timer/Counter block -+ * -------------------------------------------------------------------- */ -+ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+static struct resource tcb_resources[] = { -+ [0] = { -+ .start = AT91SAM9261_BASE_TCB0, -+ .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9261_ID_TC0, -+ .end = AT91SAM9261_ID_TC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = AT91SAM9261_ID_TC1, -+ .end = AT91SAM9261_ID_TC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = AT91SAM9261_ID_TC2, -+ .end = AT91SAM9261_ID_TC2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9261_tcb_device = { -+ .name = "atmel_tcb", -+ .id = 0, -+ .resource = tcb_resources, -+ .num_resources = ARRAY_SIZE(tcb_resources), -+}; -+ -+static void __init at91_add_device_tc(void) -+{ -+ /* this chip has a separate clock and irq for each TC channel */ -+ at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); -+ at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); -+ at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); -+ platform_device_register(&at91sam9261_tcb_device); -+} -+#else -+static void __init at91_add_device_tc(void) { } -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * RTT -+ * -------------------------------------------------------------------- */ -+ -+static struct resource rtt_resources[] = { -+ { -+ .start = AT91_BASE_SYS + AT91_RTT, -+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91sam9261_rtt_device = { -+ .name = "at91_rtt", -+ .id = -1, -+ .resource = rtt_resources, -+ .num_resources = ARRAY_SIZE(rtt_resources), -+}; -+ -+static void __init at91_add_device_rtt(void) -+{ -+ device_init_wakeup(&at91sam9261_rtt_device.dev, 1); -+ platform_device_register(&at91sam9261_rtt_device); -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * Watchdog -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) -+static struct platform_device at91sam9261_wdt_device = { -+ .name = "at91_wdt", -+ .id = -1, -+ .num_resources = 0, -+}; -+ -+static void __init at91_add_device_watchdog(void) -+{ -+ platform_device_register(&at91sam9261_wdt_device); -+} -+#else -+static void __init at91_add_device_watchdog(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_LEDS) --u8 at91_leds_cpu; --u8 at91_leds_timer; -+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -+static u64 ssc0_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc0_resources[] = { -+ [0] = { -+ .start = AT91SAM9261_BASE_SSC0, -+ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9261_ID_SSC0, -+ .end = AT91SAM9261_ID_SSC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9261_ssc0_device = { -+ .name = "ssc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &ssc0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc0_resources, -+ .num_resources = ARRAY_SIZE(ssc0_resources), -+}; -+ -+static inline void configure_ssc0_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB21, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB22, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB23, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB24, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB25, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB26, 1); -+} -+ -+static u64 ssc1_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc1_resources[] = { -+ [0] = { -+ .start = AT91SAM9261_BASE_SSC1, -+ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9261_ID_SSC1, -+ .end = AT91SAM9261_ID_SSC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9261_ssc1_device = { -+ .name = "ssc", -+ .id = 1, -+ .dev = { -+ .dma_mask = &ssc1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc1_resources, -+ .num_resources = ARRAY_SIZE(ssc1_resources), -+}; -+ -+static inline void configure_ssc1_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_B_periph(AT91_PIN_PA17, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_B_periph(AT91_PIN_PA18, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_B_periph(AT91_PIN_PA19, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_B_periph(AT91_PIN_PA20, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_B_periph(AT91_PIN_PA21, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_B_periph(AT91_PIN_PA22, 1); -+} -+ -+static u64 ssc2_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc2_resources[] = { -+ [0] = { -+ .start = AT91SAM9261_BASE_SSC2, -+ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9261_ID_SSC2, -+ .end = AT91SAM9261_ID_SSC2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9261_ssc2_device = { -+ .name = "ssc", -+ .id = 2, -+ .dev = { -+ .dma_mask = &ssc2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc2_resources, -+ .num_resources = ARRAY_SIZE(ssc2_resources), -+}; - --void __init at91_init_leds(u8 cpu_led, u8 timer_led) -+static inline void configure_ssc2_pins(unsigned pins) - { -- /* Enable GPIO to access the LEDs */ -- at91_set_gpio_output(cpu_led, 1); -- at91_set_gpio_output(timer_led, 1); -+ if (pins & ATMEL_SSC_TF) -+ at91_set_B_periph(AT91_PIN_PC25, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_B_periph(AT91_PIN_PC26, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_B_periph(AT91_PIN_PC27, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_B_periph(AT91_PIN_PC28, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_B_periph(AT91_PIN_PC29, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_B_periph(AT91_PIN_PC30, 1); -+} -+ -+/* -+ * SSC controllers are accessed through library code, instead of any -+ * kind of all-singing/all-dancing driver. For example one could be -+ * used by a particular I2S audio codec's driver, while another one -+ * on the same system might be used by a custom data capture driver. -+ */ -+void __init at91_add_device_ssc(unsigned id, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ /* -+ * NOTE: caller is responsible for passing information matching -+ * "pins" to whatever will be using each particular controller. -+ */ -+ switch (id) { -+ case AT91SAM9261_ID_SSC0: -+ pdev = &at91sam9261_ssc0_device; -+ configure_ssc0_pins(pins); -+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); -+ break; -+ case AT91SAM9261_ID_SSC1: -+ pdev = &at91sam9261_ssc1_device; -+ configure_ssc1_pins(pins); -+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); -+ break; -+ case AT91SAM9261_ID_SSC2: -+ pdev = &at91sam9261_ssc2_device; -+ configure_ssc2_pins(pins); -+ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); -+ break; -+ default: -+ return; -+ } - -- at91_leds_cpu = cpu_led; -- at91_leds_timer = timer_led; -+ platform_device_register(pdev); - } -+ - #else --void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {} - #endif - - -@@ -583,13 +838,15 @@ - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), - }; -+static u64 dbgu_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9261_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { -- .platform_data = &dbgu_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &dbgu_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -@@ -618,24 +875,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart0_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9261_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { -- .platform_data = &uart0_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), - }; - --static inline void configure_usart0_pins(void) -+static inline void configure_usart0_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ -- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ -- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ - } - - static struct resource uart1_resources[] = { -@@ -655,22 +917,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart1_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9261_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { -- .platform_data = &uart1_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), - }; - --static inline void configure_usart1_pins(void) -+static inline void configure_usart1_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ - } - - static struct resource uart2_resources[] = { -@@ -690,28 +959,35 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart2_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9261_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { -- .platform_data = &uart2_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), - }; - --static inline void configure_usart2_pins(void) -+static inline void configure_usart2_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ - } - --struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - struct platform_device *atmel_default_console_device; /* the serial console device */ - --void __init at91_init_serial(struct at91_uart_config *config) -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) - { - int i; - -@@ -719,17 +995,17 @@ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: -- configure_usart0_pins(); -+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9261_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); - break; - case 1: -- configure_usart1_pins(); -+ configure_usart1_pins(0); - at91_uarts[i] = &at91sam9261_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); - break; - case 2: -- configure_usart2_pins(); -+ configure_usart2_pins(0); - at91_uarts[i] = &at91sam9261_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); - break; -@@ -751,6 +1027,48 @@ - printk(KERN_INFO "AT91: No default serial console defined.\n"); - } - -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: /* DBGU */ -+ pdev = &at91sam9261_dbgu_device; -+ configure_dbgu_pins(); -+ at91_clock_associate("mck", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9261_ID_US0: -+ pdev = &at91sam9261_uart0_device; -+ configure_usart0_pins(pins); -+ at91_clock_associate("usart0_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9261_ID_US1: -+ pdev = &at91sam9261_uart1_device; -+ configure_usart1_pins(pins); -+ at91_clock_associate("usart1_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9261_ID_US2: -+ pdev = &at91sam9261_uart2_device; -+ configure_usart2_pins(pins); -+ at91_clock_associate("usart2_clk", &pdev->dev, "usart"); -+ break; -+ default: -+ return; -+ } -+ pdev->id = portnr; /* update to mapped ID */ -+ -+ if (portnr < ATMEL_MAX_UART) -+ at91_uarts[portnr] = pdev; -+} -+ -+void __init at91_set_serial_console(unsigned portnr) -+{ -+ if (portnr < ATMEL_MAX_UART) -+ atmel_default_console_device = at91_uarts[portnr]; -+ if (!atmel_default_console_device) -+ printk(KERN_INFO "AT91: No default serial console defined.\n"); -+} -+ - void __init at91_add_device_serial(void) - { - int i; -@@ -761,7 +1079,9 @@ - } - } - #else --void __init at91_init_serial(struct at91_uart_config *config) {} -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -+void __init at91_set_serial_console(unsigned portnr) {} - void __init at91_add_device_serial(void) {} - #endif - -@@ -774,6 +1094,9 @@ - */ - static int __init at91_add_standard_devices(void) - { -+ at91_add_device_rtt(); -+ at91_add_device_watchdog(); -+ at91_add_device_tc(); - return 0; - } - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9263.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-03-01 19:03:55.000000000 +0200 -@@ -11,12 +11,14 @@ - */ - - #include <linux/module.h> -+#include <linux/pm.h> - - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - #include <asm/arch/at91sam9263.h> - #include <asm/arch/at91_pmc.h> - #include <asm/arch/at91_rstc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - #include "clock.h" -@@ -271,6 +273,11 @@ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); - } - -+static void at91sam9263_poweroff(void) -+{ -+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -+} -+ - - /* -------------------------------------------------------------------- - * AT91SAM9263 processor initialization -@@ -282,6 +289,7 @@ - iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); - - at91_arch_reset = at91sam9263_reset; -+ pm_power_off = at91sam9263_poweroff; - at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); - - /* Init clock subsystem */ -@@ -304,34 +312,34 @@ - static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C, D and E */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C, D and E */ - 0, - 0, -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ -- 4, /* CAN */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface 0 */ -- 6, /* Serial Peripheral Interface 1 */ -- 5, /* Serial Synchronous Controller 0 */ -- 5, /* Serial Synchronous Controller 1 */ -- 6, /* AC97 Controller */ -+ 3, /* CAN */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface 0 */ -+ 5, /* Serial Peripheral Interface 1 */ -+ 4, /* Serial Synchronous Controller 0 */ -+ 4, /* Serial Synchronous Controller 1 */ -+ 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, - 0, /* 2D Graphic Engine */ -- 3, /* USB Device Port */ -+ 2, /* USB Device Port */ - 0, /* Image Sensor Interface */ - 3, /* LDC Controller */ - 0, /* DMA Controller */ - 0, -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ - }; -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:09:36.000000000 +0200 -@@ -12,6 +12,7 @@ - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/i2c-gpio.h> - -@@ -21,7 +22,7 @@ - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> - #include <asm/arch/at91sam9263.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91sam926x_smc.h> - #include <asm/arch/at91sam9263_matrix.h> - - #include "generic.h" -@@ -32,7 +33,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) --static u64 ohci_dmamask = 0xffffffffUL; -+static u64 ohci_dmamask = DMA_BIT_MASK(32); - static struct at91_usbh_data usbh_data; - - static struct resource usbh_resources[] = { -@@ -53,7 +54,7 @@ - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, -@@ -136,7 +137,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) --static u64 eth_dmamask = 0xffffffffUL; -+static u64 eth_dmamask = DMA_BIT_MASK(32); - static struct at91_eth_data eth_data; - - static struct resource eth_resources[] = { -@@ -157,7 +158,7 @@ - .id = -1, - .dev = { - .dma_mask = ð_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, -@@ -210,7 +211,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) --static u64 mmc_dmamask = 0xffffffffUL; -+static u64 mmc_dmamask = DMA_BIT_MASK(32); - static struct at91_mmc_data mmc0_data, mmc1_data; - - static struct resource mmc0_resources[] = { -@@ -231,7 +232,7 @@ - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, -@@ -256,7 +257,7 @@ - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, -@@ -357,10 +358,15 @@ - #define NAND_BASE AT91_CHIPSELECT_3 - - static struct resource nand_resources[] = { -- { -+ [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91_BASE_SYS + AT91_ECC0, -+ .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1, -+ .flags = IORESOURCE_MEM, - } - }; - -@@ -382,7 +388,7 @@ - return; - - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); -- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC); -+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); - - /* set the bus interface characteristics */ - at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) -@@ -500,7 +506,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) --static u64 spi_dmamask = 0xffffffffUL; -+static u64 spi_dmamask = DMA_BIT_MASK(32); - - static struct resource spi0_resources[] = { - [0] = { -@@ -520,7 +526,7 @@ - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -@@ -546,7 +552,7 @@ - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -@@ -612,7 +618,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) --static u64 ac97_dmamask = 0xffffffffUL; -+static u64 ac97_dmamask = DMA_BIT_MASK(32); - static struct atmel_ac97_data ac97_data; - - static struct resource ac97_resources[] = { -@@ -633,7 +639,7 @@ - .id = 1, - .dev = { - .dma_mask = &ac97_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, -@@ -663,11 +669,61 @@ - - - /* -------------------------------------------------------------------- -+ * Image Sensor Interface -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) -+ -+struct resource isi_resources[] = { -+ [0] = { -+ .start = AT91SAM9263_BASE_ISI, -+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9263_ID_ISI, -+ .end = AT91SAM9263_ID_ISI, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9263_isi_device = { -+ .name = "at91_isi", -+ .id = -1, -+ .resource = isi_resources, -+ .num_resources = ARRAY_SIZE(isi_resources), -+}; -+ -+void __init at91_add_device_isi(void) -+{ -+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ -+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ -+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ -+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ -+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ -+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ -+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ -+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ -+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ -+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ -+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ -+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ -+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ -+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ -+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ -+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ -+} -+#else -+void __init at91_add_device_isi(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) --static u64 lcdc_dmamask = 0xffffffffUL; -+static u64 lcdc_dmamask = DMA_BIT_MASK(32); - static struct atmel_lcdfb_info lcdc_data; - - static struct resource lcdc_resources[] = { -@@ -688,7 +744,7 @@ - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, -@@ -732,24 +788,227 @@ - - - /* -------------------------------------------------------------------- -- * LEDs -+ * Timer/Counter block -+ * -------------------------------------------------------------------- */ -+ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+static struct resource tcb_resources[] = { -+ [0] = { -+ .start = AT91SAM9263_BASE_TCB0, -+ .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9263_ID_TCB, -+ .end = AT91SAM9263_ID_TCB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9263_tcb_device = { -+ .name = "atmel_tcb", -+ .id = 0, -+ .resource = tcb_resources, -+ .num_resources = ARRAY_SIZE(tcb_resources), -+}; -+ -+static void __init at91_add_device_tc(void) -+{ -+ /* this chip has one clock and irq for all three TC channels */ -+ at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); -+ platform_device_register(&at91sam9263_tcb_device); -+} -+#else -+static void __init at91_add_device_tc(void) { } -+#endif -+ -+/* -------------------------------------------------------------------- -+ * RTT -+ * -------------------------------------------------------------------- */ -+ -+static struct resource rtt0_resources[] = { -+ { -+ .start = AT91_BASE_SYS + AT91_RTT0, -+ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91sam9263_rtt0_device = { -+ .name = "at91_rtt", -+ .id = 0, -+ .resource = rtt0_resources, -+ .num_resources = ARRAY_SIZE(rtt0_resources), -+}; -+ -+static struct resource rtt1_resources[] = { -+ { -+ .start = AT91_BASE_SYS + AT91_RTT1, -+ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91sam9263_rtt1_device = { -+ .name = "at91_rtt", -+ .id = 1, -+ .resource = rtt1_resources, -+ .num_resources = ARRAY_SIZE(rtt1_resources), -+}; -+ -+static void __init at91_add_device_rtt(void) -+{ -+ device_init_wakeup(&at91sam9263_rtt0_device.dev, 1); -+ platform_device_register(&at91sam9263_rtt0_device); -+ device_init_wakeup(&at91sam9263_rtt1_device.dev, 1); -+ platform_device_register(&at91sam9263_rtt1_device); -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * Watchdog -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) -+static struct platform_device at91sam9263_wdt_device = { -+ .name = "at91_wdt", -+ .id = -1, -+ .num_resources = 0, -+}; -+ -+static void __init at91_add_device_watchdog(void) -+{ -+ platform_device_register(&at91sam9263_wdt_device); -+} -+#else -+static void __init at91_add_device_watchdog(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_LEDS) --u8 at91_leds_cpu; --u8 at91_leds_timer; -+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -+static u64 ssc0_dmamask = DMA_BIT_MASK(32); - --void __init at91_init_leds(u8 cpu_led, u8 timer_led) -+static struct resource ssc0_resources[] = { -+ [0] = { -+ .start = AT91SAM9263_BASE_SSC0, -+ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9263_ID_SSC0, -+ .end = AT91SAM9263_ID_SSC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9263_ssc0_device = { -+ .name = "ssc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &ssc0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc0_resources, -+ .num_resources = ARRAY_SIZE(ssc0_resources), -+}; -+ -+static inline void configure_ssc0_pins(unsigned pins) - { -- /* Enable GPIO to access the LEDs */ -- at91_set_gpio_output(cpu_led, 1); -- at91_set_gpio_output(timer_led, 1); -+ if (pins & ATMEL_SSC_TF) -+ at91_set_B_periph(AT91_PIN_PB0, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_B_periph(AT91_PIN_PB1, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_B_periph(AT91_PIN_PB2, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_B_periph(AT91_PIN_PB3, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_B_periph(AT91_PIN_PB4, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_B_periph(AT91_PIN_PB5, 1); -+} -+ -+static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -- at91_leds_cpu = cpu_led; -- at91_leds_timer = timer_led; -+static struct resource ssc1_resources[] = { -+ [0] = { -+ .start = AT91SAM9263_BASE_SSC1, -+ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9263_ID_SSC1, -+ .end = AT91SAM9263_ID_SSC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9263_ssc1_device = { -+ .name = "ssc", -+ .id = 1, -+ .dev = { -+ .dma_mask = &ssc1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc1_resources, -+ .num_resources = ARRAY_SIZE(ssc1_resources), -+}; -+ -+static inline void configure_ssc1_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PB6, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PB7, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PB8, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PB9, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_A_periph(AT91_PIN_PB10, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_A_periph(AT91_PIN_PB11, 1); -+} -+ -+/* -+ * SSC controllers are accessed through library code, instead of any -+ * kind of all-singing/all-dancing driver. For example one could be -+ * used by a particular I2S audio codec's driver, while another one -+ * on the same system might be used by a custom data capture driver. -+ */ -+void __init at91_add_device_ssc(unsigned id, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ /* -+ * NOTE: caller is responsible for passing information matching -+ * "pins" to whatever will be using each particular controller. -+ */ -+ switch (id) { -+ case AT91SAM9263_ID_SSC0: -+ pdev = &at91sam9263_ssc0_device; -+ configure_ssc0_pins(pins); -+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); -+ break; -+ case AT91SAM9263_ID_SSC1: -+ pdev = &at91sam9263_ssc1_device; -+ configure_ssc1_pins(pins); -+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); -+ break; -+ default: -+ return; -+ } -+ -+ platform_device_register(pdev); - } -+ - #else --void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {} - #endif - - -@@ -777,13 +1036,15 @@ - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), - }; -+static u64 dbgu_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9263_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { -- .platform_data = &dbgu_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &dbgu_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -@@ -812,24 +1073,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart0_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9263_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { -- .platform_data = &uart0_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), - }; - --static inline void configure_usart0_pins(void) -+static inline void configure_usart0_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ -- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ -- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ - } - - static struct resource uart1_resources[] = { -@@ -849,24 +1115,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart1_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9263_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { -- .platform_data = &uart1_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), - }; - --static inline void configure_usart1_pins(void) -+static inline void configure_usart1_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ -- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ -- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ - } - - static struct resource uart2_resources[] = { -@@ -886,30 +1157,35 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart2_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9263_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { -- .platform_data = &uart2_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), - }; - --static inline void configure_usart2_pins(void) -+static inline void configure_usart2_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ -- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ -- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ - } - --struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - struct platform_device *atmel_default_console_device; /* the serial console device */ - --void __init at91_init_serial(struct at91_uart_config *config) -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) - { - int i; - -@@ -917,17 +1193,17 @@ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: -- configure_usart0_pins(); -+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); - break; - case 1: -- configure_usart1_pins(); -+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); - break; - case 2: -- configure_usart2_pins(); -+ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); - break; -@@ -949,6 +1225,48 @@ - printk(KERN_INFO "AT91: No default serial console defined.\n"); - } - -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: /* DBGU */ -+ pdev = &at91sam9263_dbgu_device; -+ configure_dbgu_pins(); -+ at91_clock_associate("mck", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9263_ID_US0: -+ pdev = &at91sam9263_uart0_device; -+ configure_usart0_pins(pins); -+ at91_clock_associate("usart0_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9263_ID_US1: -+ pdev = &at91sam9263_uart1_device; -+ configure_usart1_pins(pins); -+ at91_clock_associate("usart1_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9263_ID_US2: -+ pdev = &at91sam9263_uart2_device; -+ configure_usart2_pins(pins); -+ at91_clock_associate("usart2_clk", &pdev->dev, "usart"); -+ break; -+ default: -+ return; -+ } -+ pdev->id = portnr; /* update to mapped ID */ -+ -+ if (portnr < ATMEL_MAX_UART) -+ at91_uarts[portnr] = pdev; -+} -+ -+void __init at91_set_serial_console(unsigned portnr) -+{ -+ if (portnr < ATMEL_MAX_UART) -+ atmel_default_console_device = at91_uarts[portnr]; -+ if (!atmel_default_console_device) -+ printk(KERN_INFO "AT91: No default serial console defined.\n"); -+} -+ - void __init at91_add_device_serial(void) - { - int i; -@@ -959,7 +1277,9 @@ - } - } - #else --void __init at91_init_serial(struct at91_uart_config *config) {} -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -+void __init at91_set_serial_console(unsigned portnr) {} - void __init at91_add_device_serial(void) {} - #endif - -@@ -971,6 +1291,9 @@ - */ - static int __init at91_add_standard_devices(void) - { -+ at91_add_device_rtt(); -+ at91_add_device_watchdog(); -+ at91_add_device_tc(); - return 0; - } - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-02-25 22:18:18.000000000 +0200 -@@ -1,23 +1,20 @@ - /* -- * linux/arch/arm/mach-at91/at91sam926x_time.c -+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x - * - * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France - * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France -+ * Converted to ClockSource/ClockEvents by David Brownell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -- --#include <linux/init.h> - #include <linux/interrupt.h> - #include <linux/irq.h> - #include <linux/kernel.h> --#include <linux/sched.h> --#include <linux/time.h> -+#include <linux/clk.h> -+#include <linux/clockchips.h> - --#include <asm/hardware.h> --#include <asm/io.h> - #include <asm/mach/time.h> - - #include <asm/arch/at91_pit.h> -@@ -26,88 +23,166 @@ - #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) - #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) - -+static u32 pit_cycle; /* write-once */ -+static u32 pit_cnt; /* access only w/system irq blocked */ -+ -+ - /* -- * Returns number of microseconds since last timer interrupt. Note that interrupts -- * will have been disabled by do_gettimeofday() -- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. -+ * Clocksource: just a monotonic counter of MCK/16 cycles. -+ * We don't care whether or not PIT irqs are enabled. - */ --static unsigned long at91sam926x_gettimeoffset(void) -+static cycle_t read_pit_clk(void) - { -- unsigned long elapsed; -- unsigned long t = at91_sys_read(AT91_PIT_PIIR); -+ unsigned long flags; -+ u32 elapsed; -+ u32 t; -+ -+ raw_local_irq_save(flags); -+ elapsed = pit_cnt; -+ t = at91_sys_read(AT91_PIT_PIIR); -+ raw_local_irq_restore(flags); -+ -+ elapsed += PIT_PICNT(t) * pit_cycle; -+ elapsed += PIT_CPIV(t); -+ return elapsed; -+} - -- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */ -+static struct clocksource pit_clk = { -+ .name = "pit", -+ .rating = 175, -+ .read = read_pit_clk, -+ .shift = 20, -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+ -+/* -+ * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) -+ */ -+static void -+pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -+{ -+ unsigned long flags; - -- return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH; -+ switch (mode) { -+ case CLOCK_EVT_MODE_PERIODIC: -+ case CLOCK_EVT_MODE_RESUME: -+ /* update clocksource counter, then enable the IRQ */ -+ raw_local_irq_save(flags); -+ pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); -+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN -+ | AT91_PIT_PITIEN); -+ raw_local_irq_restore(flags); -+ break; -+ case CLOCK_EVT_MODE_ONESHOT: -+ BUG(); -+ /* FALLTHROUGH */ -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ case CLOCK_EVT_MODE_UNUSED: -+ /* disable irq, leaving the clocksource active */ -+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); -+ break; -+ } - } - -+static struct clock_event_device pit_clkevt = { -+ .name = "pit", -+ .features = CLOCK_EVT_FEAT_PERIODIC, -+ .shift = 32, -+ .rating = 100, -+ .cpumask = CPU_MASK_CPU0, -+ .set_mode = pit_clkevt_mode, -+}; -+ -+ - /* - * IRQ handler for the timer. - */ --static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) -+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) - { -- volatile long nr_ticks; - -- if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */ -- write_seqlock(&xtime_lock); -+ /* The PIT interrupt may be disabled, and is shared */ -+ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) -+ && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) { -+ unsigned nr_ticks; - -- /* Get number to ticks performed before interrupt and clear PIT interrupt */ -+ /* Get number of ticks performed before irq, and ack it */ - nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); - do { -- timer_tick(); -+ pit_cnt += pit_cycle; -+ pit_clkevt.event_handler(&pit_clkevt); - nr_ticks--; - } while (nr_ticks); - -- write_sequnlock(&xtime_lock); - return IRQ_HANDLED; -- } else -- return IRQ_NONE; /* not handled */ -+ } -+ -+ return IRQ_NONE; - } - --static struct irqaction at91sam926x_timer_irq = { -+static struct irqaction at91sam926x_pit_irq = { - .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -- .handler = at91sam926x_timer_interrupt -+ .handler = at91sam926x_pit_interrupt - }; - --void at91sam926x_timer_reset(void) -+static void at91sam926x_pit_reset(void) - { -- /* Disable timer */ -+ /* Disable timer and irqs */ - at91_sys_write(AT91_PIT_MR, 0); - -- /* Clear any pending interrupts */ -- (void) at91_sys_read(AT91_PIT_PIVR); -+ /* Clear any pending interrupts, wait for PIT to stop counting */ -+ while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0) -+ cpu_relax(); - -- /* Set Period Interval timer and enable its interrupt */ -- at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN); -+ /* Start PIT but don't enable IRQ */ -+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); - } - - /* -- * Set up timer interrupt. -+ * Set up both clocksource and clockevent support. - */ --void __init at91sam926x_timer_init(void) -+static void __init at91sam926x_pit_init(void) - { -+ unsigned long pit_rate; -+ unsigned bits; -+ -+ /* -+ * Use our actual MCK to figure out how many MCK/16 ticks per -+ * 1/HZ period (instead of a compile-time constant LATCH). -+ */ -+ pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16; -+ pit_cycle = (pit_rate + HZ/2) / HZ; -+ WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); -+ - /* Initialize and enable the timer */ -- at91sam926x_timer_reset(); -+ at91sam926x_pit_reset(); - -- /* Make IRQs happen for the system timer. */ -- setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq); -+ /* -+ * Register clocksource. The high order bits of PIV are unused, -+ * so this isn't a 32-bit counter unless we get clockevent irqs. -+ */ -+ pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift); -+ bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; -+ pit_clk.mask = CLOCKSOURCE_MASK(bits); -+ clocksource_register(&pit_clk); -+ -+ /* Set up irq handler */ -+ setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq); -+ -+ /* Set up and register clockevents */ -+ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); -+ clockevents_register_device(&pit_clkevt); - } - --#ifdef CONFIG_PM --static void at91sam926x_timer_suspend(void) -+static void at91sam926x_pit_suspend(void) - { - /* Disable timer */ - at91_sys_write(AT91_PIT_MR, 0); - } --#else --#define at91sam926x_timer_suspend NULL --#endif - - struct sys_timer at91sam926x_timer = { -- .init = at91sam926x_timer_init, -- .offset = at91sam926x_gettimeoffset, -- .suspend = at91sam926x_timer_suspend, -- .resume = at91sam926x_timer_reset, -+ .init = at91sam926x_pit_init, -+ .suspend = at91sam926x_pit_suspend, -+ .resume = at91sam926x_pit_reset, - }; -- -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-03-01 19:04:12.000000000 +0200 -@@ -10,6 +10,7 @@ - */ - - #include <linux/module.h> -+#include <linux/pm.h> - - #include <asm/mach/arch.h> - #include <asm/mach/map.h> -@@ -17,6 +18,7 @@ - #include <asm/arch/at91sam9rl.h> - #include <asm/arch/at91_pmc.h> - #include <asm/arch/at91_rstc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - #include "clock.h" -@@ -244,6 +246,11 @@ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); - } - -+static void at91sam9rl_poweroff(void) -+{ -+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -+} -+ - - /* -------------------------------------------------------------------- - * AT91SAM9RL processor initialization -@@ -274,6 +281,7 @@ - iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); - - at91_arch_reset = at91sam9rl_reset; -+ pm_power_off = at91sam9rl_poweroff; - at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); - - /* Init clock subsystem */ -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c ---- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:10:11.000000000 +0200 -@@ -9,6 +9,7 @@ - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/i2c-gpio.h> - -@@ -19,7 +20,7 @@ - #include <asm/arch/gpio.h> - #include <asm/arch/at91sam9rl.h> - #include <asm/arch/at91sam9rl_matrix.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91sam926x_smc.h> - - #include "generic.h" - -@@ -29,7 +30,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) --static u64 mmc_dmamask = 0xffffffffUL; -+static u64 mmc_dmamask = DMA_BIT_MASK(32); - static struct at91_mmc_data mmc_data; - - static struct resource mmc_resources[] = { -@@ -50,7 +51,7 @@ - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, -@@ -104,10 +105,15 @@ - #define NAND_BASE AT91_CHIPSELECT_3 - - static struct resource nand_resources[] = { -- { -+ [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91_BASE_SYS + AT91_ECC, -+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, -+ .flags = IORESOURCE_MEM, - } - }; - -@@ -247,7 +253,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) --static u64 spi_dmamask = 0xffffffffUL; -+static u64 spi_dmamask = DMA_BIT_MASK(32); - - static struct resource spi_resources[] = { - [0] = { -@@ -267,7 +273,7 @@ - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi_resources, - .num_resources = ARRAY_SIZE(spi_resources), -@@ -312,7 +318,7 @@ - * -------------------------------------------------------------------- */ - - #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) --static u64 lcdc_dmamask = 0xffffffffUL; -+static u64 lcdc_dmamask = DMA_BIT_MASK(32); - static struct atmel_lcdfb_info lcdc_data; - - static struct resource lcdc_resources[] = { -@@ -340,7 +346,7 @@ - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, -@@ -384,24 +390,244 @@ - - - /* -------------------------------------------------------------------- -- * LEDs -+ * Timer/Counter block -+ * -------------------------------------------------------------------- */ -+ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+static struct resource tcb_resources[] = { -+ [0] = { -+ .start = AT91SAM9RL_BASE_TCB0, -+ .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9RL_ID_TC0, -+ .end = AT91SAM9RL_ID_TC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = AT91SAM9RL_ID_TC1, -+ .end = AT91SAM9RL_ID_TC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = AT91SAM9RL_ID_TC2, -+ .end = AT91SAM9RL_ID_TC2, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9rl_tcb_device = { -+ .name = "atmel_tcb", -+ .id = 0, -+ .resource = tcb_resources, -+ .num_resources = ARRAY_SIZE(tcb_resources), -+}; -+ -+static void __init at91_add_device_tc(void) -+{ -+ /* this chip has a separate clock and irq for each TC channel */ -+ at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); -+ at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); -+ at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); -+ platform_device_register(&at91sam9rl_tcb_device); -+} -+#else -+static void __init at91_add_device_tc(void) { } -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * RTC -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) -+static struct platform_device at91sam9rl_rtc_device = { -+ .name = "at91_rtc", -+ .id = -1, -+ .num_resources = 0, -+}; -+ -+static void __init at91_add_device_rtc(void) -+{ -+ device_init_wakeup(&at91sam9rl_rtc_device.dev, 1); -+ platform_device_register(&at91sam9rl_rtc_device); -+} -+#else -+static void __init at91_add_device_rtc(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * RTT -+ * -------------------------------------------------------------------- */ -+ -+static struct resource rtt_resources[] = { -+ { -+ .start = AT91_BASE_SYS + AT91_RTT, -+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device at91sam9rl_rtt_device = { -+ .name = "at91_rtt", -+ .id = -1, -+ .resource = rtt_resources, -+ .num_resources = ARRAY_SIZE(rtt_resources), -+}; -+ -+static void __init at91_add_device_rtt(void) -+{ -+ device_init_wakeup(&at91sam9rl_rtt_device.dev, 1); -+ platform_device_register(&at91sam9rl_rtt_device); -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * Watchdog -+ * -------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) -+static struct platform_device at91sam9rl_wdt_device = { -+ .name = "at91_wdt", -+ .id = -1, -+ .num_resources = 0, -+}; -+ -+static void __init at91_add_device_watchdog(void) -+{ -+ platform_device_register(&at91sam9rl_wdt_device); -+} -+#else -+static void __init at91_add_device_watchdog(void) {} -+#endif -+ -+ -+/* -------------------------------------------------------------------- -+ * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_LEDS) --u8 at91_leds_cpu; --u8 at91_leds_timer; -+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -+static u64 ssc0_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc0_resources[] = { -+ [0] = { -+ .start = AT91SAM9RL_BASE_SSC0, -+ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9RL_ID_SSC0, -+ .end = AT91SAM9RL_ID_SSC0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9rl_ssc0_device = { -+ .name = "ssc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &ssc0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc0_resources, -+ .num_resources = ARRAY_SIZE(ssc0_resources), -+}; -+ -+static inline void configure_ssc0_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_A_periph(AT91_PIN_PC0, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_A_periph(AT91_PIN_PC1, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_A_periph(AT91_PIN_PA15, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_A_periph(AT91_PIN_PA16, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_B_periph(AT91_PIN_PA10, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_B_periph(AT91_PIN_PA22, 1); -+} -+ -+static u64 ssc1_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ssc1_resources[] = { -+ [0] = { -+ .start = AT91SAM9RL_BASE_SSC1, -+ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AT91SAM9RL_ID_SSC1, -+ .end = AT91SAM9RL_ID_SSC1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device at91sam9rl_ssc1_device = { -+ .name = "ssc", -+ .id = 1, -+ .dev = { -+ .dma_mask = &ssc1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .resource = ssc1_resources, -+ .num_resources = ARRAY_SIZE(ssc1_resources), -+}; -+ -+static inline void configure_ssc1_pins(unsigned pins) -+{ -+ if (pins & ATMEL_SSC_TF) -+ at91_set_B_periph(AT91_PIN_PA29, 1); -+ if (pins & ATMEL_SSC_TK) -+ at91_set_B_periph(AT91_PIN_PA30, 1); -+ if (pins & ATMEL_SSC_TD) -+ at91_set_B_periph(AT91_PIN_PA13, 1); -+ if (pins & ATMEL_SSC_RD) -+ at91_set_B_periph(AT91_PIN_PA14, 1); -+ if (pins & ATMEL_SSC_RK) -+ at91_set_B_periph(AT91_PIN_PA9, 1); -+ if (pins & ATMEL_SSC_RF) -+ at91_set_B_periph(AT91_PIN_PA8, 1); -+} - --void __init at91_init_leds(u8 cpu_led, u8 timer_led) -+/* -+ * SSC controllers are accessed through library code, instead of any -+ * kind of all-singing/all-dancing driver. For example one could be -+ * used by a particular I2S audio codec's driver, while another one -+ * on the same system might be used by a custom data capture driver. -+ */ -+void __init at91_add_device_ssc(unsigned id, unsigned pins) - { -- /* Enable GPIO to access the LEDs */ -- at91_set_gpio_output(cpu_led, 1); -- at91_set_gpio_output(timer_led, 1); -+ struct platform_device *pdev; - -- at91_leds_cpu = cpu_led; -- at91_leds_timer = timer_led; -+ /* -+ * NOTE: caller is responsible for passing information matching -+ * "pins" to whatever will be using each particular controller. -+ */ -+ switch (id) { -+ case AT91SAM9RL_ID_SSC0: -+ pdev = &at91sam9rl_ssc0_device; -+ configure_ssc0_pins(pins); -+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); -+ break; -+ case AT91SAM9RL_ID_SSC1: -+ pdev = &at91sam9rl_ssc1_device; -+ configure_ssc1_pins(pins); -+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); -+ break; -+ default: -+ return; -+ } -+ -+ platform_device_register(pdev); - } -+ - #else --void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {} - #endif - - -@@ -428,13 +654,15 @@ - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), - }; -+static u64 dbgu_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9rl_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { -- .platform_data = &dbgu_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &dbgu_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -@@ -463,24 +691,37 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart0_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9rl_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { -- .platform_data = &uart0_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), - }; - --static inline void configure_usart0_pins(void) -+static inline void configure_usart0_pins(unsigned pins) - { -- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ -- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ -- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ -- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ -+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ -+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ -+ if (pins & ATMEL_UART_DSR) -+ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */ -+ if (pins & ATMEL_UART_DTR) -+ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */ -+ if (pins & ATMEL_UART_DCD) -+ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */ -+ if (pins & ATMEL_UART_RI) -+ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */ - } - - static struct resource uart1_resources[] = { -@@ -500,22 +741,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart1_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9rl_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { -- .platform_data = &uart1_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), - }; - --static inline void configure_usart1_pins(void) -+static inline void configure_usart1_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */ - } - - static struct resource uart2_resources[] = { -@@ -535,22 +783,29 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart2_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9rl_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { -- .platform_data = &uart2_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart2_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), - }; - --static inline void configure_usart2_pins(void) -+static inline void configure_usart2_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */ - } - - static struct resource uart3_resources[] = { -@@ -570,28 +825,35 @@ - .use_dma_tx = 1, - .use_dma_rx = 1, - }; -+static u64 uart3_dmamask = DMA_BIT_MASK(32); - - static struct platform_device at91sam9rl_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { -- .platform_data = &uart3_data, -- .coherent_dma_mask = 0xffffffff, -+ .dma_mask = &uart3_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), - }; - --static inline void configure_usart3_pins(void) -+static inline void configure_usart3_pins(unsigned pins) - { - at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ -+ -+ if (pins & ATMEL_UART_RTS) -+ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */ -+ if (pins & ATMEL_UART_CTS) -+ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ - } - --struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - struct platform_device *atmel_default_console_device; /* the serial console device */ - --void __init at91_init_serial(struct at91_uart_config *config) -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) - { - int i; - -@@ -599,22 +861,22 @@ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: -- configure_usart0_pins(); -+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9rl_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); - break; - case 1: -- configure_usart1_pins(); -+ configure_usart1_pins(0); - at91_uarts[i] = &at91sam9rl_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); - break; - case 2: -- configure_usart2_pins(); -+ configure_usart2_pins(0); - at91_uarts[i] = &at91sam9rl_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); - break; - case 3: -- configure_usart3_pins(); -+ configure_usart3_pins(0); - at91_uarts[i] = &at91sam9rl_uart3_device; - at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); - break; -@@ -636,6 +898,53 @@ - printk(KERN_INFO "AT91: No default serial console defined.\n"); - } - -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -+{ -+ struct platform_device *pdev; -+ -+ switch (id) { -+ case 0: /* DBGU */ -+ pdev = &at91sam9rl_dbgu_device; -+ configure_dbgu_pins(); -+ at91_clock_associate("mck", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9RL_ID_US0: -+ pdev = &at91sam9rl_uart0_device; -+ configure_usart0_pins(pins); -+ at91_clock_associate("usart0_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9RL_ID_US1: -+ pdev = &at91sam9rl_uart1_device; -+ configure_usart1_pins(pins); -+ at91_clock_associate("usart1_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9RL_ID_US2: -+ pdev = &at91sam9rl_uart2_device; -+ configure_usart2_pins(pins); -+ at91_clock_associate("usart2_clk", &pdev->dev, "usart"); -+ break; -+ case AT91SAM9RL_ID_US3: -+ pdev = &at91sam9rl_uart3_device; -+ configure_usart3_pins(pins); -+ at91_clock_associate("usart3_clk", &pdev->dev, "usart"); -+ break; -+ default: -+ return; -+ } -+ pdev->id = portnr; /* update to mapped ID */ -+ -+ if (portnr < ATMEL_MAX_UART) -+ at91_uarts[portnr] = pdev; -+} -+ -+void __init at91_set_serial_console(unsigned portnr) -+{ -+ if (portnr < ATMEL_MAX_UART) -+ atmel_default_console_device = at91_uarts[portnr]; -+ if (!atmel_default_console_device) -+ printk(KERN_INFO "AT91: No default serial console defined.\n"); -+} -+ - void __init at91_add_device_serial(void) - { - int i; -@@ -646,7 +955,9 @@ - } - } - #else --void __init at91_init_serial(struct at91_uart_config *config) {} -+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -+void __init at91_set_serial_console(unsigned portnr) {} - void __init at91_add_device_serial(void) {} - #endif - -@@ -659,6 +970,10 @@ - */ - static int __init at91_add_standard_devices(void) - { -+ at91_add_device_rtc(); -+ at91_add_device_rtt(); -+ at91_add_device_watchdog(); -+ at91_add_device_tc(); - return 0; - } - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c ---- linux-2.6.24/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-03-01 20:40:51.000000000 +0200 -@@ -0,0 +1,188 @@ -+/* -+ * KwikByte CAM60 -+ * -+ * based on board-sam9260ek.c -+ * Copyright (C) 2005 SAN People -+ * Copyright (C) 2006 Atmel -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/flash.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+ -+#include "generic.h" -+ -+ -+/* -+ * Serial port configuration. -+ * 0 .. 5 = USART0 .. USART5 -+ * 6 = DBGU -+ */ -+static struct at91_uart_config __initdata cam60_uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 1, -+ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ -+}; -+ -+static void __init cam60_map_io(void) -+{ -+ /* Initialize processor: 10 MHz crystal */ -+ at91sam9260_initialize(10000000); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&cam60_uart_config); -+} -+ -+static void __init cam60_init_irq(void) -+{ -+ at91sam9260_init_interrupts(NULL); -+} -+ -+ -+/* -+ * USB Host -+ */ -+static struct at91_usbh_data __initdata cam60_usbh_data = { -+ .ports = 1, -+}; -+ -+ -+/* -+ * SPI devices. -+ */ -+#if defined(CONFIG_MTD_DATAFLASH) -+static struct mtd_partition __initdata cam60_spi_partitions[] = { -+ { -+ .name = "BOOT1", -+ .offset = 0, -+ .size = 4 * 1056, -+ }, -+ { -+ .name = "BOOT2", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 256 * 1056, -+ }, -+ { -+ .name = "kernel", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 2222 * 1056, -+ }, -+ { -+ .name = "file system", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = { -+ .name = "spi_flash", -+ .parts = cam60_spi_partitions, -+ .nr_parts = ARRAY_SIZE(cam60_spi_partitions) -+}; -+#endif -+ -+static struct spi_board_info cam60_spi_devices[] = { -+#if defined(CONFIG_MTD_DATAFLASH) -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ .bus_num = 0, -+ .platform_data = &cam60_spi_flash_platform_data -+ }, -+#endif -+}; -+ -+ -+/* -+ * MACB Ethernet device -+ */ -+static struct __initdata at91_eth_data cam60_macb_data = { -+ .phy_irq_pin = AT91_PIN_PB5, -+ .is_rmii = 0, -+}; -+ -+ -+/* -+ * NAND Flash -+ */ -+static struct mtd_partition __initdata cam60_nand_partition[] = { -+ { -+ .name = "nand_fs", -+ .offset = 0, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(cam60_nand_partition); -+ return cam60_nand_partition; -+} -+ -+static struct at91_nand_data __initdata cam60_nand_data = { -+ .ale = 21, -+ .cle = 22, -+ // .det_pin = ... not there -+ .rdy_pin = AT91_PIN_PA9, -+ .enable_pin = AT91_PIN_PA7, -+ .partition_info = nand_partitions, -+}; -+ -+ -+static void __init cam60_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* SPI */ -+ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); -+ /* Ethernet */ -+ at91_add_device_eth(&cam60_macb_data); -+ /* USB Host */ -+ /* enable USB power supply circuit */ -+ at91_set_gpio_output(AT91_PIN_PB18, 1); -+ at91_add_device_usbh(&cam60_usbh_data); -+ /* NAND */ -+ at91_add_device_nand(&cam60_nand_data); -+} -+ -+MACHINE_START(CAM60, "KwikByte CAM60") -+ /* Maintainer: KwikByte */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91sam926x_timer, -+ .map_io = cam60_map_io, -+ .init_irq = cam60_init_irq, -+ .init_machine = cam60_board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c ---- linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-03-01 20:43:07.000000000 +0200 -@@ -0,0 +1,359 @@ -+/* -+ * linux/arch/arm/mach-at91/board-cap9adk.c -+ * -+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> -+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -+ * Copyright (C) 2005 SAN People -+ * Copyright (C) 2007 Atmel Corporation. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/ads7846.h> -+#include <linux/fb.h> -+#include <linux/mtd/physmap.h> -+ -+#include <video/atmel_lcdc.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+#include <asm/arch/at91cap9_matrix.h> -+#include <asm/arch/at91sam926x_smc.h> -+ -+#include "generic.h" -+ -+ -+static void __init cap9adk_map_io(void) -+{ -+ /* Initialize processor: 12 MHz crystal */ -+ at91cap9_initialize(12000000); -+ -+ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ -+ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); -+ /* ... POWER LED always on */ -+ at91_set_gpio_output(AT91_PIN_PC29, 1); -+ -+ /* Setup the serial ports and console */ -+ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ -+ at91_set_serial_console(0); -+} -+ -+static void __init cap9adk_init_irq(void) -+{ -+ at91cap9_init_interrupts(NULL); -+} -+ -+ -+/* -+ * USB Host port -+ */ -+static struct at91_usbh_data __initdata cap9adk_usbh_data = { -+ .ports = 2, -+}; -+ -+ -+/* -+ * ADS7846 Touchscreen -+ */ -+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -+static int ads7843_pendown_state(void) -+{ -+ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ -+} -+ -+static struct ads7846_platform_data ads_info = { -+ .model = 7843, -+ .x_min = 150, -+ .x_max = 3830, -+ .y_min = 190, -+ .y_max = 3830, -+ .vref_delay_usecs = 100, -+ .x_plate_ohms = 450, -+ .y_plate_ohms = 250, -+ .pressure_max = 15000, -+ .debounce_max = 1, -+ .debounce_rep = 0, -+ .debounce_tol = (~0), -+ .get_pendown_state = ads7843_pendown_state, -+}; -+ -+static void __init cap9adk_add_device_ts(void) -+{ -+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ -+ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ -+} -+#else -+static void __init cap9adk_add_device_ts(void) {} -+#endif -+ -+ -+/* -+ * SPI devices. -+ */ -+static struct spi_board_info cap9adk_spi_devices[] = { -+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) -+ { /* DataFlash card */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ .bus_num = 0, -+ }, -+#endif -+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -+ { -+ .modalias = "ads7846", -+ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ -+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ -+ .bus_num = 0, -+ .platform_data = &ads_info, -+ .irq = AT91_PIN_PC4, -+ }, -+#endif -+}; -+ -+ -+/* -+ * MCI (SD/MMC) -+ */ -+static struct at91_mmc_data __initdata cap9adk_mmc_data = { -+ .wire4 = 1, -+// .det_pin = ... not connected -+// .wp_pin = ... not connected -+// .vcc_pin = ... not connected -+}; -+ -+ -+/* -+ * MACB Ethernet device -+ */ -+static struct at91_eth_data __initdata cap9adk_macb_data = { -+ .is_rmii = 1, -+}; -+ -+ -+/* -+ * NAND flash -+ */ -+static struct mtd_partition __initdata cap9adk_nand_partitions[] = { -+ { -+ .name = "NAND partition", -+ .offset = 0, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions); -+ return cap9adk_nand_partitions; -+} -+ -+static struct at91_nand_data __initdata cap9adk_nand_data = { -+ .ale = 21, -+ .cle = 22, -+// .det_pin = ... not connected -+// .rdy_pin = ... not connected -+ .enable_pin = AT91_PIN_PD15, -+ .partition_info = nand_partitions, -+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) -+ .bus_width_16 = 1, -+#else -+ .bus_width_16 = 0, -+#endif -+}; -+ -+ -+/* -+ * NOR flash -+ */ -+static struct mtd_partition cap9adk_nor_partitions[] = { -+ { -+ .name = "NOR partition", -+ .offset = 0, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct physmap_flash_data cap9adk_nor_data = { -+ .width = 2, -+ .parts = cap9adk_nor_partitions, -+ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), -+}; -+ -+#define NOR_BASE AT91_CHIPSELECT_0 -+#define NOR_SIZE 0x800000 -+ -+static struct resource nor_flash_resources[] = { -+ { -+ .start = NOR_BASE, -+ .end = NOR_BASE + NOR_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct platform_device cap9adk_nor_flash = { -+ .name = "physmap-flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &cap9adk_nor_data, -+ }, -+ .resource = nor_flash_resources, -+ .num_resources = ARRAY_SIZE(nor_flash_resources), -+}; -+ -+static __init void cap9adk_add_device_nor(void) -+{ -+ unsigned long csa; -+ -+ csa = at91_sys_read(AT91_MATRIX_EBICSA); -+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); -+ -+ /* set the bus interface characteristics */ -+ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) -+ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); -+ -+ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) -+ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); -+ -+ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); -+ -+ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE -+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE -+ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); -+ -+ platform_device_register(&cap9adk_nor_flash); -+} -+ -+ -+/* -+ * LCD Controller -+ */ -+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -+static struct fb_videomode at91_tft_vga_modes[] = { -+ { -+ .name = "TX09D50VM1CCA @ 60", -+ .refresh = 60, -+ .xres = 240, .yres = 320, -+ .pixclock = KHZ2PICOS(4965), -+ -+ .left_margin = 1, .right_margin = 33, -+ .upper_margin = 1, .lower_margin = 0, -+ .hsync_len = 5, .vsync_len = 1, -+ -+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs at91fb_default_monspecs = { -+ .manufacturer = "HIT", -+ .monitor = "TX09D70VM1CCA", -+ -+ .modedb = at91_tft_vga_modes, -+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), -+ .hfmin = 15000, -+ .hfmax = 64000, -+ .vfmin = 50, -+ .vfmax = 150, -+}; -+ -+#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ -+ | ATMEL_LCDC_DISTYPE_TFT \ -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) -+ -+static void at91_lcdc_power_control(int on) -+{ -+ if (on) -+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ -+ else -+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ -+} -+ -+/* Driver datas */ -+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { -+ .default_bpp = 16, -+ .default_dmacon = ATMEL_LCDC_DMAEN, -+ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, -+ .default_monspecs = &at91fb_default_monspecs, -+ .atmel_lcdfb_power_control = at91_lcdc_power_control, -+ .guard_time = 1, -+}; -+ -+#else -+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; -+#endif -+ -+ -+/* -+ * AC97 -+ */ -+static struct atmel_ac97_data cap9adk_ac97_data = { -+// .reset_pin = ... not connected -+}; -+ -+ -+static void __init cap9adk_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* USB Host */ -+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); -+ at91_add_device_usbh(&cap9adk_usbh_data); -+ /* SPI */ -+ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); -+ /* Touchscreen */ -+ cap9adk_add_device_ts(); -+ /* MMC */ -+ at91_add_device_mmc(1, &cap9adk_mmc_data); -+ /* Ethernet */ -+ at91_add_device_eth(&cap9adk_macb_data); -+ /* NAND */ -+ at91_add_device_nand(&cap9adk_nand_data); -+ /* NOR Flash */ -+ cap9adk_add_device_nor(); -+ /* I2C */ -+ at91_add_device_i2c(NULL, 0); -+ /* LCD Controller */ -+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); -+ at91_add_device_lcdc(&cap9adk_lcdc_data); -+ /* AC97 */ -+ at91_add_device_ac97(&cap9adk_ac97_data); -+} -+ -+MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") -+ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91sam926x_timer, -+ .map_io = cap9adk_map_io, -+ .init_irq = cap9adk_init_irq, -+ .init_machine = cap9adk_board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c ---- linux-2.6.24/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-chub.c 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,132 @@ -+/* -+ * linux/arch/arm/mach-at91/board-chub.c -+ * -+ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board -+ * by Kuten Ivan -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+ -+#include "generic.h" -+ -+/* -+ * Serial port configuration. -+ * 0 .. 3 = USART0 .. USART3 -+ * 4 = DBGU -+ */ -+static struct at91_uart_config __initdata chub_uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 5, -+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */ -+}; -+ -+static void __init chub_init_irq(void) -+{ -+ at91rm9200_init_interrupts(NULL); -+} -+ -+static void __init chub_map_io(void) -+{ -+ /* Initialize clocks: 18.432 MHz crystal */ -+ at91rm9200_initialize(18432000, AT91RM9200_PQFP); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&chub_uart_config); -+} -+ -+static struct at91_eth_data __initdata chub_eth_data = { -+ .phy_irq_pin = AT91_PIN_PB29, -+ .is_rmii = 0, -+}; -+ -+static struct mtd_partition __initdata chub_nand_partition[] = { -+ { -+ .name = "NAND Partition 1", -+ .offset = 0, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(chub_nand_partition); -+ return chub_nand_partition; -+} -+ -+static struct at91_nand_data __initdata chub_nand_data = { -+ .ale = 22, -+ .cle = 21, -+ .enable_pin = AT91_PIN_PA27, -+ .partition_info = nand_partitions, -+}; -+ -+static struct spi_board_info chub_spi_devices[] = { -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ }, -+}; -+ -+static void __init chub_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* I2C */ -+ at91_add_device_i2c(NULL, 0); -+ /* Ethernet */ -+ at91_add_device_eth(&chub_eth_data); -+ /* SPI */ -+ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices)); -+ /* NAND Flash */ -+ at91_add_device_nand(&chub_nand_data); -+ /* Disable write protect for NAND */ -+ at91_set_gpio_output(AT91_PIN_PB7, 1); -+ /* Power enable for 3x RS-232 and 1x RS-485 */ -+ at91_set_gpio_output(AT91_PIN_PB9, 1); -+ /* Disable write protect for FRAM */ -+ at91_set_gpio_output(AT91_PIN_PA21, 1); -+ /* Disable write protect for Dataflash */ -+ at91_set_gpio_output(AT91_PIN_PA19, 1); -+} -+ -+MACHINE_START(CHUB, "Promwad Chub") -+ /* Maintainer: Ivan Kuten AT Promwad DOT com */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91rm9200_timer, -+ .map_io = chub_map_io, -+ .init_irq = chub_init_irq, -+ .init_machine = chub_board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c ---- linux-2.6.24/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:04:55.000000000 +0200 -@@ -24,6 +24,9 @@ - #include <linux/module.h> - #include <linux/platform_device.h> - #include <linux/spi/spi.h> -+#include <linux/interrupt.h> -+#include <linux/input.h> -+#include <linux/gpio_keys.h> - #include <linux/mtd/physmap.h> - - #include <asm/hardware.h> -@@ -59,6 +62,7 @@ - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); -+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */ - - /* Setup the serial ports and console */ - at91_init_serial(&csb337_uart_config); -@@ -156,6 +160,84 @@ - .num_resources = ARRAY_SIZE(csb_flash_resources), - }; - -+static struct gpio_led csb337_leds[] = { -+ { /* "led0", yellow */ -+ .name = "led0", -+ .gpio = AT91_PIN_PB2, -+ .active_low = 1, -+ .default_trigger = "heartbeat", -+ }, -+ { /* "led1", green */ -+ .name = "led1", -+ .gpio = AT91_PIN_PB1, -+ .active_low = 1, -+ .default_trigger = "mmc0", -+ }, -+ { /* "led2", yellow */ -+ .name = "led2", -+ .gpio = AT91_PIN_PB0, -+ .active_low = 1, -+ .default_trigger = "ide-disk", -+ } -+}; -+ -+/* -+ * GPIO Buttons -+ */ -+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -+static struct gpio_keys_button csb300_buttons[] = { -+ { -+ .gpio = AT91_PIN_PB29, -+ .code = BTN_0, -+ .desc = "sw0", -+ .active_low = 1, -+ .wakeup = 1, -+ }, -+ { -+ .gpio = AT91_PIN_PB28, -+ .code = BTN_1, -+ .desc = "sw1", -+ .active_low = 1, -+ .wakeup = 1, -+ }, -+ { -+ .gpio = AT91_PIN_PA21, -+ .code = BTN_2, -+ .desc = "sw2", -+ .active_low = 1, -+ .wakeup = 1, -+ } -+}; -+ -+static struct gpio_keys_platform_data csb300_button_data = { -+ .buttons = csb300_buttons, -+ .nbuttons = ARRAY_SIZE(csb300_buttons), -+}; -+ -+static struct platform_device csb300_button_device = { -+ .name = "gpio-keys", -+ .id = -1, -+ .num_resources = 0, -+ .dev = { -+ .platform_data = &csb300_button_data, -+ } -+}; -+ -+static void __init csb300_add_device_buttons(void) -+{ -+ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */ -+ at91_set_deglitch(AT91_PIN_PB29, 1); -+ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */ -+ at91_set_deglitch(AT91_PIN_PB28, 1); -+ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */ -+ at91_set_deglitch(AT91_PIN_PA21, 1); -+ -+ platform_device_register(&csb300_button_device); -+} -+#else -+static void __init csb300_add_device_buttons(void) {} -+#endif -+ - static void __init csb337_board_init(void) - { - /* Serial */ -@@ -175,8 +257,12 @@ - at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &csb337_mmc_data); -+ /* LEDS */ -+ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds)); - /* NOR flash */ - platform_device_register(&csb_flash); -+ /* Switches on CSB300 */ -+ csb300_add_device_buttons(); - } - - MACHINE_START(CSB337, "Cogent CSB337") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c ---- linux-2.6.24/arch/arm/mach-at91/board-dk.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-02-18 23:23:26.000000000 +0200 -@@ -25,6 +25,7 @@ - #include <linux/init.h> - #include <linux/mm.h> - #include <linux/module.h> -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/spi/spi.h> - #include <linux/mtd/physmap.h> -@@ -73,6 +74,185 @@ - at91rm9200_init_interrupts(NULL); - } - -+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) -+#include <video/s1d13xxxfb.h> -+#include <asm/arch/ics1523.h> -+ -+/* EPSON S1D13806 FB */ -+#define AT91_FB_REG_BASE 0x30000000L -+#define AT91_FB_REG_SIZE 0x200 -+#define AT91_FB_VMEM_BASE 0x30200000L -+#define AT91_FB_VMEM_SIZE 0x140000L -+ -+static void __init dk_init_video(void) -+{ -+ /* NWAIT Signal */ -+ at91_set_A_periph(AT91_PIN_PC6, 0); -+ -+ /* Initialization of the Static Memory Controller for Chip Select 2 */ -+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ -+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */ -+ | AT91_SMC_TDF_(1) /* float time */ -+ ); -+ -+ at91_ics1523_init(); -+} -+ -+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz) -+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */ -+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = { -+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */ -+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */ -+ {S1DREG_GPIO_CNF0, 0x00}, -+ {S1DREG_GPIO_CNF1, 0x00}, -+ {S1DREG_GPIO_CTL0, 0x08}, -+ {S1DREG_GPIO_CTL1, 0x00}, -+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/ -+ {S1DREG_LCD_CLK_CNF, 0x00}, -+ {S1DREG_CRT_CLK_CNF, 0x00}, -+ {S1DREG_MPLUG_CLK_CNF, 0x00}, -+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */ -+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */ -+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */ -+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */ -+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */ -+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */ -+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */ -+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */ -+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */ -+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */ -+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */ -+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, -+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */ -+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */ -+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */ -+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */ -+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */ -+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */ -+ {S1DREG_LCD_DISP_START0, 0x00}, -+ {S1DREG_LCD_DISP_START1, 0xC8}, -+ {S1DREG_LCD_DISP_START2, 0x00}, -+ {S1DREG_LCD_MEM_OFF0, 0x80}, -+ {S1DREG_LCD_MEM_OFF1, 0x02}, -+ {S1DREG_LCD_PIX_PAN, 0x00}, -+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B}, -+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C}, -+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */ -+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */ -+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */ -+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */ -+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, -+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */ -+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */ -+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */ -+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */ -+ {S1DREG_TV_OUT_CTL, 0x10}, -+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */ -+ {S1DREG_CRT_DISP_START0, 0x00}, -+ {S1DREG_CRT_DISP_START1, 0x00}, -+ {S1DREG_CRT_DISP_START2, 0x00}, -+ {S1DREG_CRT_MEM_OFF0, 0x80}, -+ {S1DREG_CRT_MEM_OFF1, 0x02}, -+ {S1DREG_CRT_PIX_PAN, 0x00}, -+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B}, -+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C}, -+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */ -+ {S1DREG_LCD_CUR_START, 0x01}, -+ {S1DREG_LCD_CUR_XPOS0, 0x00}, -+ {S1DREG_LCD_CUR_XPOS1, 0x00}, -+ {S1DREG_LCD_CUR_YPOS0, 0x00}, -+ {S1DREG_LCD_CUR_YPOS1, 0x00}, -+ {S1DREG_LCD_CUR_BCTL0, 0x00}, -+ {S1DREG_LCD_CUR_GCTL0, 0x00}, -+ {S1DREG_LCD_CUR_RCTL0, 0x00}, -+ {S1DREG_LCD_CUR_BCTL1, 0x1F}, -+ {S1DREG_LCD_CUR_GCTL1, 0x3F}, -+ {S1DREG_LCD_CUR_RCTL1, 0x1F}, -+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, -+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */ -+ {S1DREG_CRT_CUR_START, 0x01}, -+ {S1DREG_CRT_CUR_XPOS0, 0x00}, -+ {S1DREG_CRT_CUR_XPOS1, 0x00}, -+ {S1DREG_CRT_CUR_YPOS0, 0x00}, -+ {S1DREG_CRT_CUR_YPOS1, 0x00}, -+ {S1DREG_CRT_CUR_BCTL0, 0x00}, -+ {S1DREG_CRT_CUR_GCTL0, 0x00}, -+ {S1DREG_CRT_CUR_RCTL0, 0x00}, -+ {S1DREG_CRT_CUR_BCTL1, 0x1F}, -+ {S1DREG_CRT_CUR_GCTL1, 0x3F}, -+ {S1DREG_CRT_CUR_RCTL1, 0x1F}, -+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, -+ {S1DREG_BBLT_CTL0, 0x00}, -+ {S1DREG_BBLT_CTL0, 0x00}, -+ {S1DREG_BBLT_CC_EXP, 0x00}, -+ {S1DREG_BBLT_OP, 0x00}, -+ {S1DREG_BBLT_SRC_START0, 0x00}, -+ {S1DREG_BBLT_SRC_START1, 0x00}, -+ {S1DREG_BBLT_SRC_START2, 0x00}, -+ {S1DREG_BBLT_DST_START0, 0x00}, -+ {S1DREG_BBLT_DST_START1, 0x00}, -+ {S1DREG_BBLT_DST_START2, 0x00}, -+ {S1DREG_BBLT_MEM_OFF0, 0x00}, -+ {S1DREG_BBLT_MEM_OFF1, 0x00}, -+ {S1DREG_BBLT_WIDTH0, 0x00}, -+ {S1DREG_BBLT_WIDTH1, 0x00}, -+ {S1DREG_BBLT_HEIGHT0, 0x00}, -+ {S1DREG_BBLT_HEIGHT1, 0x00}, -+ {S1DREG_BBLT_BGC0, 0x00}, -+ {S1DREG_BBLT_BGC1, 0x00}, -+ {S1DREG_BBLT_FGC0, 0x00}, -+ {S1DREG_BBLT_FGC1, 0x00}, -+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */ -+ {S1DREG_LKUP_ADDR, 0x00}, -+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */ -+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */ -+ {S1DREG_CPU2MEM_WDOGT, 0x00}, -+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */ -+}; -+ -+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = { -+ .initregs = dk_s1dfb_initregs, -+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs), -+ .platform_init_video = dk_init_video, -+}; -+ -+static u64 s1dfb_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource dk_s1dfb_resource[] = { -+ [0] = { /* video mem */ -+ .name = "s1d13806 memory", -+ .start = AT91_FB_VMEM_BASE, -+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { /* video registers */ -+ .name = "s1d13806 registers", -+ .start = AT91_FB_REG_BASE, -+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct platform_device dk_s1dfb_device = { -+ .name = "s1d13806fb", -+ .id = -1, -+ .dev = { -+ .dma_mask = &s1dfb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &dk_s1dfb_pdata, -+ }, -+ .resource = dk_s1dfb_resource, -+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource), -+}; -+ -+static void __init dk_add_device_video(void) -+{ -+ platform_device_register(&dk_s1dfb_device); -+} -+#else -+static void __init dk_add_device_video(void) {} -+#endif -+ - static struct at91_eth_data __initdata dk_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -@@ -164,7 +344,7 @@ - #define DK_FLASH_SIZE 0x200000 - - static struct physmap_flash_data dk_flash_data = { -- .width = 2, -+ .width = 2, - }; - - static struct resource dk_flash_resource = { -@@ -183,6 +363,14 @@ - .num_resources = 1, - }; - -+static struct gpio_led dk_leds[] = { -+ { -+ .name = "led0", -+ .gpio = AT91_PIN_PB2, -+ .active_low = 1, -+ .default_trigger = "heartbeat", -+ } -+}; - - static void __init dk_board_init(void) - { -@@ -213,8 +401,14 @@ - at91_add_device_nand(&dk_nand_data); - /* NOR Flash */ - platform_device_register(&dk_flash); -+ /* LEDs */ -+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); -+ /* SSC (to LM4549 audio codec) */ -+ at91_add_device_ssc(AT91RM9200_ID_SSC1, ATMEL_SSC_TD | ATMEL_SSC_RX); -+ /* SSC (to SI3021 line interface) */ -+ at91_add_device_ssc(AT91RM9200_ID_SSC2, ATMEL_SSC_TD | ATMEL_SSC_TK | ATMEL_SSC_RD | ATMEL_SSC_RF); - /* VGA */ --// dk_add_device_video(); -+ dk_add_device_video(); - } - - MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c ---- linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,183 @@ -+/* -+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c -+ * Copyright (C) 2007 emQbit.com. -+ * -+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/flash.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+ -+#include "generic.h" -+ -+ -+/* -+ * Serial port configuration. -+ * 0 .. 3 = USART0 .. USART3 -+ * 4 = DBGU -+ */ -+static struct at91_uart_config __initdata ecb_at91uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 2, -+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -+}; -+ -+static void __init ecb_at91map_io(void) -+{ -+ /* Initialize processor: 18.432 MHz crystal */ -+ at91rm9200_initialize(18432000, AT91RM9200_PQFP); -+ -+ /* Setup the LEDs */ -+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&ecb_at91uart_config); -+} -+ -+static void __init ecb_at91init_irq(void) -+{ -+ at91rm9200_init_interrupts(NULL); -+} -+ -+static struct at91_eth_data __initdata ecb_at91eth_data = { -+ .phy_irq_pin = AT91_PIN_PC4, -+ .is_rmii = 0, -+}; -+ -+static struct at91_usbh_data __initdata ecb_at91usbh_data = { -+ .ports = 1, -+}; -+ -+static struct at91_mmc_data __initdata ecb_at91mmc_data = { -+ .slot_b = 0, -+ .wire4 = 1, -+}; -+ -+ -+#if defined(CONFIG_MTD_DATAFLASH) -+static struct mtd_partition __initdata my_flash0_partitions[] = -+{ -+ { /* 0x8400 */ -+ .name = "Darrell-loader", -+ .offset = 0, -+ .size = 12* 1056, -+ }, -+ { -+ .name = "U-boot", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 110 * 1056, -+ }, -+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ -+ .name = "Uoot-env", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 8 * 1056, -+ }, -+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ -+ .name = "Kernel", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 1534 * 1056, -+ }, -+ { /* 190200 - jffs2 root filesystem */ -+ .name = "Filesystem", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, /* 26 sectors */ -+ } -+}; -+ -+static struct flash_platform_data __initdata my_flash0_platform = { -+ .name = "Removable flash card", -+ .parts = my_flash0_partitions, -+ .nr_parts = ARRAY_SIZE(my_flash0_partitions) -+}; -+ -+#endif -+ -+static struct spi_board_info __initdata ecb_at91spi_devices[] = { -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 10 * 1000 * 1000, -+ .bus_num = 0, -+#if defined(CONFIG_MTD_DATAFLASH) -+ .platform_data = &my_flash0_platform, -+#endif -+ }, -+ { /* User accessable spi - cs1 (250KHz) */ -+ .modalias = "spi-cs1", -+ .chip_select = 1, -+ .max_speed_hz = 250 * 1000, -+ }, -+ { /* User accessable spi - cs2 (1MHz) */ -+ .modalias = "spi-cs2", -+ .chip_select = 2, -+ .max_speed_hz = 1 * 1000 * 1000, -+ }, -+ { /* User accessable spi - cs3 (10MHz) */ -+ .modalias = "spi-cs3", -+ .chip_select = 3, -+ .max_speed_hz = 10 * 1000 * 1000, -+ }, -+}; -+ -+static void __init ecb_at91board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ -+ /* Ethernet */ -+ at91_add_device_eth(&ecb_at91eth_data); -+ -+ /* USB Host */ -+ at91_add_device_usbh(&ecb_at91usbh_data); -+ -+ /* I2C */ -+ at91_add_device_i2c(NULL, 0); -+ -+ /* MMC */ -+ at91_add_device_mmc(0, &ecb_at91mmc_data); -+ -+ /* SPI */ -+ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); -+} -+ -+MACHINE_START(ECBAT91, "emQbit's ECB_AT91") -+ /* Maintainer: emQbit.com */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91rm9200_timer, -+ .map_io = ecb_at91map_io, -+ .init_irq = ecb_at91init_irq, -+ .init_machine = ecb_at91board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c ---- linux-2.6.24/arch/arm/mach-at91/board-ek.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-02-18 22:26:42.000000000 +0200 -@@ -25,6 +25,7 @@ - #include <linux/init.h> - #include <linux/mm.h> - #include <linux/module.h> -+#include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/spi/spi.h> - #include <linux/mtd/physmap.h> -@@ -73,6 +74,187 @@ - at91rm9200_init_interrupts(NULL); - } - -+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) -+#include <video/s1d13xxxfb.h> -+#include <asm/arch/ics1523.h> -+ -+/* EPSON S1D13806 FB */ -+#define AT91_FB_REG_BASE 0x40000000L -+#define AT91_FB_REG_SIZE 0x200 -+#define AT91_FB_VMEM_BASE 0x40200000L -+#define AT91_FB_VMEM_SIZE 0x140000L -+ -+static void __init ek_init_video(void) -+{ -+ /* NWAIT Signal */ -+ at91_set_A_periph(AT91_PIN_PC6, 0); -+ -+ /* Initialization of the Static Memory Controller for Chip Select 3 */ -+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */ -+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */ -+ | AT91_SMC_TDF_(1) /* float time */ -+ ); -+ -+ at91_ics1523_init(); -+} -+ -+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz) -+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */ -+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = { -+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */ -+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */ -+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00 -+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08 -+ {S1DREG_GPIO_CTL0, 0x00}, -+ {S1DREG_GPIO_CTL1, 0x00}, -+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/ -+ {S1DREG_LCD_CLK_CNF, 0x00}, -+ {S1DREG_CRT_CLK_CNF, 0x00}, -+ {S1DREG_MPLUG_CLK_CNF, 0x00}, -+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */ -+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */ -+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */ -+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */ -+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */ -+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */ -+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */ -+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */ -+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */ -+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */ -+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */ -+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, -+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */ -+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */ -+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */ -+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */ -+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */ -+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */ -+ {S1DREG_LCD_DISP_START0, 0x00}, -+ {S1DREG_LCD_DISP_START1, 0xC8}, -+ {S1DREG_LCD_DISP_START2, 0x00}, -+ {S1DREG_LCD_MEM_OFF0, 0x80}, -+ {S1DREG_LCD_MEM_OFF1, 0x02}, -+ {S1DREG_LCD_PIX_PAN, 0x00}, -+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B}, -+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C}, -+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */ -+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */ -+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */ -+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */ -+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, -+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */ -+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */ -+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */ -+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */ -+ {S1DREG_TV_OUT_CTL, 0x10}, -+ {0x005E, 0x9F}, -+ {0x005F, 0x00}, -+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */ -+ {S1DREG_CRT_DISP_START0, 0x00}, -+ {S1DREG_CRT_DISP_START1, 0x00}, -+ {S1DREG_CRT_DISP_START2, 0x00}, -+ {S1DREG_CRT_MEM_OFF0, 0x80}, -+ {S1DREG_CRT_MEM_OFF1, 0x02}, -+ {S1DREG_CRT_PIX_PAN, 0x00}, -+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B}, -+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C}, -+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */ -+ {S1DREG_LCD_CUR_START, 0x01}, -+ {S1DREG_LCD_CUR_XPOS0, 0x00}, -+ {S1DREG_LCD_CUR_XPOS1, 0x00}, -+ {S1DREG_LCD_CUR_YPOS0, 0x00}, -+ {S1DREG_LCD_CUR_YPOS1, 0x00}, -+ {S1DREG_LCD_CUR_BCTL0, 0x00}, -+ {S1DREG_LCD_CUR_GCTL0, 0x00}, -+ {S1DREG_LCD_CUR_RCTL0, 0x00}, -+ {S1DREG_LCD_CUR_BCTL1, 0x1F}, -+ {S1DREG_LCD_CUR_GCTL1, 0x3F}, -+ {S1DREG_LCD_CUR_RCTL1, 0x1F}, -+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, -+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */ -+ {S1DREG_CRT_CUR_START, 0x01}, -+ {S1DREG_CRT_CUR_XPOS0, 0x00}, -+ {S1DREG_CRT_CUR_XPOS1, 0x00}, -+ {S1DREG_CRT_CUR_YPOS0, 0x00}, -+ {S1DREG_CRT_CUR_YPOS1, 0x00}, -+ {S1DREG_CRT_CUR_BCTL0, 0x00}, -+ {S1DREG_CRT_CUR_GCTL0, 0x00}, -+ {S1DREG_CRT_CUR_RCTL0, 0x00}, -+ {S1DREG_CRT_CUR_BCTL1, 0x1F}, -+ {S1DREG_CRT_CUR_GCTL1, 0x3F}, -+ {S1DREG_CRT_CUR_RCTL1, 0x1F}, -+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, -+ {S1DREG_BBLT_CTL0, 0x00}, -+ {S1DREG_BBLT_CTL0, 0x00}, -+ {S1DREG_BBLT_CC_EXP, 0x00}, -+ {S1DREG_BBLT_OP, 0x00}, -+ {S1DREG_BBLT_SRC_START0, 0x00}, -+ {S1DREG_BBLT_SRC_START1, 0x00}, -+ {S1DREG_BBLT_SRC_START2, 0x00}, -+ {S1DREG_BBLT_DST_START0, 0x00}, -+ {S1DREG_BBLT_DST_START1, 0x00}, -+ {S1DREG_BBLT_DST_START2, 0x00}, -+ {S1DREG_BBLT_MEM_OFF0, 0x00}, -+ {S1DREG_BBLT_MEM_OFF1, 0x00}, -+ {S1DREG_BBLT_WIDTH0, 0x00}, -+ {S1DREG_BBLT_WIDTH1, 0x00}, -+ {S1DREG_BBLT_HEIGHT0, 0x00}, -+ {S1DREG_BBLT_HEIGHT1, 0x00}, -+ {S1DREG_BBLT_BGC0, 0x00}, -+ {S1DREG_BBLT_BGC1, 0x00}, -+ {S1DREG_BBLT_FGC0, 0x00}, -+ {S1DREG_BBLT_FGC1, 0x00}, -+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */ -+ {S1DREG_LKUP_ADDR, 0x00}, -+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */ -+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */ -+ {S1DREG_CPU2MEM_WDOGT, 0x00}, -+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */ -+}; -+ -+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = { -+ .initregs = ek_s1dfb_initregs, -+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs), -+ .platform_init_video = ek_init_video, -+}; -+ -+static u64 s1dfb_dmamask = DMA_BIT_MASK(32); -+ -+static struct resource ek_s1dfb_resource[] = { -+ [0] = { /* video mem */ -+ .name = "s1d13806 memory", -+ .start = AT91_FB_VMEM_BASE, -+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { /* video registers */ -+ .name = "s1d13806 registers", -+ .start = AT91_FB_REG_BASE, -+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct platform_device ek_s1dfb_device = { -+ .name = "s1d13806fb", -+ .id = -1, -+ .dev = { -+ .dma_mask = &s1dfb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &ek_s1dfb_pdata, -+ }, -+ .resource = ek_s1dfb_resource, -+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource), -+}; -+ -+static void __init ek_add_device_video(void) -+{ -+ platform_device_register(&ek_s1dfb_device); -+} -+#else -+static void __init ek_add_device_video(void) {} -+#endif -+ - static struct at91_eth_data __initdata ek_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -@@ -122,7 +304,7 @@ - #define EK_FLASH_SIZE 0x200000 - - static struct physmap_flash_data ek_flash_data = { -- .width = 2, -+ .width = 2, - }; - - static struct resource ek_flash_resource = { -@@ -141,6 +323,25 @@ - .num_resources = 1, - }; - -+static struct gpio_led ek_leds[] = { -+ { /* "user led 1", DS2 */ -+ .name = "green", -+ .gpio = AT91_PIN_PB0, -+ .active_low = 1, -+ .default_trigger = "mmc0", -+ }, -+ { /* "user led 2", DS4 */ -+ .name = "yellow", -+ .gpio = AT91_PIN_PB1, -+ .active_low = 1, -+ .default_trigger = "heartbeat", -+ }, -+ { /* "user led 3", DS6 */ -+ .name = "red", -+ .gpio = AT91_PIN_PB2, -+ .active_low = 1, -+ } -+}; - - static void __init ek_board_init(void) - { -@@ -167,8 +368,10 @@ - #endif - /* NOR Flash */ - platform_device_register(&ek_flash); -+ /* LEDs */ -+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* VGA */ --// ek_add_device_video(); -+ ek_add_device_video(); - } - - MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c ---- linux-2.6.24/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,163 @@ -+/* -+ * linux/arch/arm/mach-at91/board-homematic.c -+ * -+ * Copyright (C) 2007 eQ-3 Entwicklung GmbH -+ * -+ * based on work -+ * Copyright (C) 2005 SAN People -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/mtd/physmap.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+#include <asm/arch/at91rm9200_mc.h> -+ -+#include "generic.h" -+ -+ -+/* -+ * Serial port configuration. -+ * 0 .. 3 = USART0 .. USART3 -+ * 4 = DBGU -+ */ -+static struct at91_uart_config __initdata homematic_uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 2, -+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -+}; -+ -+static void __init homematic_map_io(void) -+{ -+ /* Initialize processor: 18.432 MHz crystal */ -+ at91rm9200_initialize(18432000, AT91RM9200_BGA); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&homematic_uart_config); -+} -+ -+static void __init homematic_init_irq(void) -+{ -+ at91rm9200_init_interrupts(NULL); -+} -+ -+static struct at91_eth_data __initdata homematic_eth_data = { -+ .phy_irq_pin = AT91_PIN_PC4, -+ .is_rmii = 0, -+}; -+ -+static struct at91_usbh_data __initdata homematic_usbh_data = { -+ .ports = 2, -+}; -+ -+static struct at91_udc_data __initdata homematic_udc_data = { -+ .vbus_pin = AT91_PIN_PD4, -+ .pullup_pin = AT91_PIN_PD5, -+}; -+ -+static struct at91_mmc_data __initdata homematic_mmc_data = { -+ .slot_b = 0, -+ .wire4 = 1, -+}; -+ -+static struct spi_board_info homematic_spi_devices[] = { -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ }, -+}; -+ -+static struct mtd_partition __initdata homematic_nand_partition[] = { -+ { -+ .name = "root", -+ .offset = 0, -+ .size = 0x02000000, -+ }, { -+ .name = "storage", -+ .offset = 0x02000000, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(homematic_nand_partition); -+ return homematic_nand_partition; -+} -+ -+static struct at91_nand_data __initdata homematic_nand_data = { -+ .ale = 22, -+ .cle = 21, -+// .det_pin = AT91_PIN_PB1, -+ .rdy_pin = AT91_PIN_PC2, -+ .enable_pin = AT91_PIN_PC0, -+ .partition_info = nand_partitions, -+}; -+ -+static void __init homematic_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* Ethernet */ -+ at91_add_device_eth(&homematic_eth_data); -+ /* USB Host */ -+ at91_add_device_usbh(&homematic_usbh_data); -+ /* USB Device */ -+ at91_add_device_udc(&homematic_udc_data); -+ at91_set_multi_drive(homematic_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ -+ /* I2C */ -+ at91_add_device_i2c(NULL, 0); -+ /* SPI */ -+ at91_add_device_spi(homematic_spi_devices, ARRAY_SIZE(homematic_spi_devices)); -+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -+ /* DataFlash card */ -+ at91_set_gpio_output(AT91_PIN_PB7, 0); -+#else -+ /* MMC */ -+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ -+ at91_add_device_mmc(0, &homematic_mmc_data); -+#endif -+ /* NAND */ -+ at91_add_device_nand(&homematic_nand_data); -+} -+ -+MACHINE_START(HOMEMATIC, "HomeMatic") -+ /* Maintainer: eQ-3 */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91rm9200_timer, -+ .map_io = homematic_map_io, -+ .init_irq = homematic_init_irq, -+ .init_machine = homematic_board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c ---- linux-2.6.24/arch/arm/mach-at91/board-kb9202.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-02-18 23:21:36.000000000 +0200 -@@ -37,6 +37,8 @@ - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> - -+#include <asm/arch/at91rm9200_mc.h> -+ - #include "generic.h" - - -@@ -111,6 +113,48 @@ - .partition_info = nand_partitions, - }; - -+ -+#if defined(CONFIG_FB_S1D15605) -+#warning "The Reset pin must be passed via platform_data, not this way" -+static struct resource kb9202_lcd_resources[] = { -+ [0] = { -+ .start = AT91_CHIPSELECT_2, -+ .end = AT91_CHIPSELECT_2 + 0x200FF, -+ .flags = IORESOURCE_MEM -+ }, -+ [1] = { /* reset pin */ -+ .start = AT91_PIN_PC22, -+ .end = AT91_PIN_PC22, -+ .flags = IORESOURCE_MEM -+ }, -+}; -+ -+static struct platform_device kb9202_lcd_device = { -+ .name = "s1d15605fb", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(kb9202_lcd_resources), -+ .resource = kb9202_lcd_resources, -+}; -+ -+static void __init kb9202_add_device_lcd(void) -+{ -+ /* In case the boot loader did not set the chip select mode and timing */ -+ at91_sys_write(AT91_SMC_CSR(2), -+ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 | -+ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1)); -+ -+ /* Backlight pin = output, off */ -+ at91_set_gpio_output(AT91_PIN_PC23, 0); -+ -+ /* Reset pin = output, in reset */ -+ at91_set_gpio_output(AT91_PIN_PC22, 0); -+ -+ platform_device_register(&kb9202_lcd_device); -+} -+#else -+static void __init kb9202_add_device_lcd(void) {} -+#endif -+ - static void __init kb9202_board_init(void) - { - /* Serial */ -@@ -129,6 +173,8 @@ - at91_add_device_spi(NULL, 0); - /* NAND */ - at91_add_device_nand(&kb9202_nand_data); -+ /* LCD */ -+ kb9202_add_device_lcd(); - } - - MACHINE_START(KB9200, "KB920x") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c ---- linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-03-01 20:39:38.000000000 +0200 -@@ -0,0 +1,199 @@ -+/* -+ * linux/arch/arm/mach-at91/board-sam9-l9260.c -+ * -+ * Copyright (C) 2005 SAN People -+ * Copyright (C) 2006 Atmel -+ * Copyright (C) 2007 Olimex Ltd -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+ -+#include "generic.h" -+ -+ -+/* -+ * Serial port configuration. -+ * 0 .. 5 = USART0 .. USART5 -+ * 6 = DBGU -+ */ -+static struct at91_uart_config __initdata ek_uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 3, -+ .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ -+}; -+ -+static void __init ek_map_io(void) -+{ -+ /* Initialize processor: 18.432 MHz crystal */ -+ at91sam9260_initialize(18432000); -+ -+ /* Setup the LEDs */ -+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&ek_uart_config); -+} -+ -+static void __init ek_init_irq(void) -+{ -+ at91sam9260_init_interrupts(NULL); -+} -+ -+ -+/* -+ * USB Host port -+ */ -+static struct at91_usbh_data __initdata ek_usbh_data = { -+ .ports = 2, -+}; -+ -+/* -+ * USB Device port -+ */ -+static struct at91_udc_data __initdata ek_udc_data = { -+ .vbus_pin = AT91_PIN_PC5, -+ .pullup_pin = 0, /* pull-up driven by UDC */ -+}; -+ -+ -+/* -+ * SPI devices. -+ */ -+static struct spi_board_info ek_spi_devices[] = { -+#if !defined(CONFIG_MMC_AT91) -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 1, -+ .max_speed_hz = 15 * 1000 * 1000, -+ .bus_num = 0, -+ }, -+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) -+ { /* DataFlash card */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ .bus_num = 0, -+ }, -+#endif -+#endif -+}; -+ -+ -+/* -+ * MACB Ethernet device -+ */ -+static struct at91_eth_data __initdata ek_macb_data = { -+ .phy_irq_pin = AT91_PIN_PA7, -+ .is_rmii = 0, -+}; -+ -+ -+/* -+ * NAND flash -+ */ -+static struct mtd_partition __initdata ek_nand_partition[] = { -+ { -+ .name = "Bootloader Area", -+ .offset = 0, -+ .size = 10 * 1024 * 1024, -+ }, -+ { -+ .name = "User Area", -+ .offset = 10 * 1024 * 1024, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(ek_nand_partition); -+ return ek_nand_partition; -+} -+ -+static struct at91_nand_data __initdata ek_nand_data = { -+ .ale = 21, -+ .cle = 22, -+// .det_pin = ... not connected -+ .rdy_pin = AT91_PIN_PC13, -+ .enable_pin = AT91_PIN_PC14, -+ .partition_info = nand_partitions, -+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) -+ .bus_width_16 = 1, -+#else -+ .bus_width_16 = 0, -+#endif -+}; -+ -+ -+/* -+ * MCI (SD/MMC) -+ */ -+static struct at91_mmc_data __initdata ek_mmc_data = { -+ .slot_b = 1, -+ .wire4 = 1, -+ .det_pin = AT91_PIN_PC8, -+ .wp_pin = AT91_PIN_PC4, -+// .vcc_pin = ... not connected -+}; -+ -+static void __init ek_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* USB Host */ -+ at91_add_device_usbh(&ek_usbh_data); -+ /* USB Device */ -+ at91_add_device_udc(&ek_udc_data); -+ /* SPI */ -+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); -+ /* NAND */ -+ at91_add_device_nand(&ek_nand_data); -+ /* Ethernet */ -+ at91_add_device_eth(&ek_macb_data); -+ /* MMC */ -+ at91_add_device_mmc(0, &ek_mmc_data); -+ /* I2C */ -+ at91_add_device_i2c(NULL, 0); -+} -+ -+MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") -+ /* Maintainer: Olimex */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91sam926x_timer, -+ .map_io = ek_map_io, -+ .init_irq = ek_init_irq, -+ .init_machine = ek_board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c ---- linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 20:40:19.000000000 +0200 -@@ -25,6 +25,8 @@ - #include <linux/module.h> - #include <linux/platform_device.h> - #include <linux/spi/spi.h> -+#include <linux/spi/at73c213.h> -+#include <linux/clk.h> - - #include <asm/hardware.h> - #include <asm/setup.h> -@@ -37,29 +39,29 @@ - - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - - --/* -- * Serial port configuration. -- * 0 .. 5 = USART0 .. USART5 -- * 6 = DBGU -- */ --static struct at91_uart_config __initdata ek_uart_config = { -- .console_tty = 0, /* ttyS0 */ -- .nr_tty = 3, -- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ --}; -- - static void __init ek_map_io(void) - { - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - -- /* Setup the serial ports and console */ -- at91_init_serial(&ek_uart_config); -+ /* DGBU on ttyS0. (Rx & Tx only) */ -+ at91_register_uart(0, 0, 0); -+ -+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ -+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS -+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD -+ | ATMEL_UART_RI); -+ -+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ -+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); -+ -+ /* set serial console to ttyS0 (ie, DBGU) */ -+ at91_set_serial_console(0); - } - - static void __init ek_init_irq(void) -@@ -85,6 +87,36 @@ - - - /* -+ * Audio -+ */ -+static struct at73c213_board_info at73c213_data = { -+ .ssc_id = 0, -+ .shortname = "AT91SAM9260-EK external DAC", -+}; -+ -+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) -+static void __init at73c213_set_clk(struct at73c213_board_info *info) -+{ -+ struct clk *pck0; -+ struct clk *plla; -+ -+ pck0 = clk_get(NULL, "pck0"); -+ plla = clk_get(NULL, "plla"); -+ -+ /* AT73C213 MCK Clock */ -+ at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */ -+ -+ clk_set_parent(pck0, plla); -+ clk_set_rate(pck0, 12416000); -+ clk_enable(pck0); -+ -+ info->dac_clk = pck0; -+} -+#else -+static void __init at73c213_set_clk(struct at73c213_board_info *info) {} -+#endif -+ -+/* - * SPI devices. - */ - static struct spi_board_info ek_spi_devices[] = { -@@ -110,6 +142,8 @@ - .chip_select = 0, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 1, -+ .mode = SPI_MODE_1, -+ .platform_data = &at73c213_data, - }, - #endif - }; -@@ -172,6 +206,24 @@ - // .vcc_pin = ... not connected - }; - -+ -+/* -+ * LEDs -+ */ -+static struct gpio_led ek_leds[] = { -+ { /* "bottom" led, green, userled1 to be defined */ -+ .name = "ds5", -+ .gpio = AT91_PIN_PA6, -+ .active_low = 1, -+ .default_trigger = "none", -+ }, -+ { /* "power" led, yellow */ -+ .name = "ds1", -+ .gpio = AT91_PIN_PA9, -+ .default_trigger = "heartbeat", -+ } -+}; -+ - static void __init ek_board_init(void) - { - /* Serial */ -@@ -190,6 +242,14 @@ - at91_add_device_mmc(0, &ek_mmc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); -+ /* SSC (to AT73C213) */ -+ at73c213_set_clk(&at73c213_data); -+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); -+ /* LEDs */ -+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -+ /* shutdown controller, wakeup button (5 msec low) */ -+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW -+ | AT91_SHDW_RTTWKEN); - } - - MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c ---- linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-03-04 21:05:58.000000000 +0200 -@@ -26,6 +26,8 @@ - #include <linux/platform_device.h> - #include <linux/spi/spi.h> - #include <linux/spi/ads7846.h> -+#include <linux/spi/at73c213.h> -+#include <linux/clk.h> - #include <linux/dm9000.h> - #include <linux/fb.h> - #include <linux/gpio_keys.h> -@@ -44,22 +46,12 @@ - - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91sam926x_smc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - - --/* -- * Serial port configuration. -- * 0 .. 2 = USART0 .. USART2 -- * 3 = DBGU -- */ --static struct at91_uart_config __initdata ek_uart_config = { -- .console_tty = 0, /* ttyS0 */ -- .nr_tty = 1, -- .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */ --}; -- - static void __init ek_map_io(void) - { - /* Initialize processor: 18.432 MHz crystal */ -@@ -68,8 +60,11 @@ - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - -- /* Setup the serial ports and console */ -- at91_init_serial(&ek_uart_config); -+ /* DGBU on ttyS0. (Rx & Tx only) */ -+ at91_register_uart(0, 0, 0); -+ -+ /* set serial console to ttyS0 (ie, DBGU) */ -+ at91_set_serial_console(0); - } - - static void __init ek_init_irq(void) -@@ -239,6 +234,36 @@ - #endif - - /* -+ * Audio -+ */ -+static struct at73c213_board_info at73c213_data = { -+ .ssc_id = 1, -+ .shortname = "AT91SAM9261-EK external DAC", -+}; -+ -+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) -+static void __init at73c213_set_clk(struct at73c213_board_info *info) -+{ -+ struct clk *pck2; -+ struct clk *plla; -+ -+ pck2 = clk_get(NULL, "pck2"); -+ plla = clk_get(NULL, "plla"); -+ -+ /* AT73C213 MCK Clock */ -+ at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */ -+ -+ clk_set_parent(pck2, plla); -+ clk_set_rate(pck2, 12416000); -+ clk_enable(pck2); -+ -+ info->dac_clk = pck2; -+} -+#else -+static void __init at73c213_set_clk(struct at73c213_board_info *info) {} -+#endif -+ -+/* - * SPI devices - */ - static struct spi_board_info ek_spi_devices[] = { -@@ -256,6 +281,7 @@ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, -+ .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ - }, - #endif - #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) -@@ -271,6 +297,9 @@ - .chip_select = 3, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 0, -+ .mode = SPI_MODE_1, -+ .platform_data = &at73c213_data, -+ .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */ - }, - #endif - }; -@@ -280,6 +309,68 @@ - * LCD Controller - */ - #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -+ -+#if defined(CONFIG_FB_ATMEL_STN) -+ -+/* STN */ -+static struct fb_videomode at91_stn_modes[] = { -+ { -+ .name = "SP06Q002 @ 75", -+ .refresh = 75, -+ .xres = 320, .yres = 240, -+ .pixclock = KHZ2PICOS(1440), -+ -+ .left_margin = 1, .right_margin = 1, -+ .upper_margin = 0, .lower_margin = 0, -+ .hsync_len = 1, .vsync_len = 1, -+ -+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs at91fb_default_stn_monspecs = { -+ .manufacturer = "HIT", -+ .monitor = "SP06Q002", -+ -+ .modedb = at91_stn_modes, -+ .modedb_len = ARRAY_SIZE(at91_stn_modes), -+ .hfmin = 15000, -+ .hfmax = 64000, -+ .vfmin = 50, -+ .vfmax = 150, -+}; -+ -+#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ -+ | ATMEL_LCDC_DISTYPE_STNMONO \ -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ -+ | ATMEL_LCDC_IFWIDTH_4 \ -+ | ATMEL_LCDC_SCANMOD_SINGLE) -+ -+static void at91_lcdc_stn_power_control(int on) -+{ -+ /* backlight */ -+ if (on) { /* power up */ -+ at91_set_gpio_value(AT91_PIN_PC14, 0); -+ at91_set_gpio_value(AT91_PIN_PC15, 0); -+ } else { /* power down */ -+ at91_set_gpio_value(AT91_PIN_PC14, 1); -+ at91_set_gpio_value(AT91_PIN_PC15, 1); -+ } -+} -+ -+static struct atmel_lcdfb_info __initdata ek_lcdc_data = { -+ .default_bpp = 1, -+ .default_dmacon = ATMEL_LCDC_DMAEN, -+ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, -+ .default_monspecs = &at91fb_default_stn_monspecs, -+ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, -+ .guard_time = 1, -+}; -+ -+#else -+ -+/* TFT */ - static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", -@@ -296,7 +387,7 @@ - }, - }; - --static struct fb_monspecs at91fb_default_monspecs = { -+static struct fb_monspecs at91fb_default_tft_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D50VM1CCA", - -@@ -308,11 +399,11 @@ - .vfmax = 150, - }; - --#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ -+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - --static void at91_lcdc_power_control(int on) -+static void at91_lcdc_tft_power_control(int on) - { - if (on) - at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ -@@ -320,15 +411,16 @@ - at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ - } - --/* Driver datas */ - static struct atmel_lcdfb_info __initdata ek_lcdc_data = { -+ .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, -- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, -- .default_monspecs = &at91fb_default_monspecs, -- .atmel_lcdfb_power_control = at91_lcdc_power_control, -+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, -+ .default_monspecs = &at91fb_default_tft_monspecs, -+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, - .guard_time = 1, - }; -+#endif - - #else - static struct atmel_lcdfb_info __initdata ek_lcdc_data; -@@ -342,25 +434,25 @@ - static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA27, -- .keycode = BTN_0, -+ .code = BTN_0, - .desc = "Button 0", - .active_low = 1, - }, - { - .gpio = AT91_PIN_PA26, -- .keycode = BTN_1, -+ .code = BTN_1, - .desc = "Button 1", - .active_low = 1, - }, - { - .gpio = AT91_PIN_PA25, -- .keycode = BTN_2, -+ .code = BTN_2, - .desc = "Button 2", - .active_low = 1, - }, - { - .gpio = AT91_PIN_PA24, -- .keycode = BTN_3, -+ .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - } -@@ -397,6 +489,29 @@ - static void __init ek_add_device_buttons(void) {} - #endif - -+/* -+ * LEDs -+ */ -+static struct gpio_led ek_leds[] = { -+ { /* "bottom" led, green, userled1 to be defined */ -+ .name = "ds7", -+ .gpio = AT91_PIN_PA14, -+ .active_low = 1, -+ .default_trigger = "none", -+ }, -+ { /* "top" led, green, userled2 to be defined */ -+ .name = "ds8", -+ .gpio = AT91_PIN_PA13, -+ .active_low = 1, -+ .default_trigger = "none", -+ }, -+ { /* "power" led, yellow */ -+ .name = "ds1", -+ .gpio = AT91_PIN_PA23, -+ .default_trigger = "heartbeat", -+ } -+}; -+ - static void __init ek_board_init(void) - { - /* Serial */ -@@ -418,6 +533,9 @@ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* Touchscreen */ - ek_add_device_ts(); -+ /* SSC (to AT73C213) */ -+ at73c213_set_clk(&at73c213_data); -+ at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); - #else - /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); -@@ -426,6 +544,11 @@ - at91_add_device_lcdc(&ek_lcdc_data); - /* Push Buttons */ - ek_add_device_buttons(); -+ /* LEDs */ -+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -+ /* shutdown controller, wakeup button (5 msec low) */ -+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW -+ | AT91_SHDW_RTTWKEN); - } - - MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c ---- linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 20:41:13.000000000 +0200 -@@ -27,6 +27,8 @@ - #include <linux/spi/spi.h> - #include <linux/spi/ads7846.h> - #include <linux/fb.h> -+#include <linux/gpio_keys.h> -+#include <linux/input.h> - - #include <video/atmel_lcdc.h> - -@@ -41,29 +43,24 @@ - - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - - --/* -- * Serial port configuration. -- * 0 .. 2 = USART0 .. USART2 -- * 3 = DBGU -- */ --static struct at91_uart_config __initdata ek_uart_config = { -- .console_tty = 0, /* ttyS0 */ -- .nr_tty = 2, -- .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */ --}; -- - static void __init ek_map_io(void) - { - /* Initialize processor: 16.367 MHz crystal */ - at91sam9263_initialize(16367660); - -- /* Setup the serial ports and console */ -- at91_init_serial(&ek_uart_config); -+ /* DGBU on ttyS0. (Rx & Tx only) */ -+ at91_register_uart(0, 0, 0); -+ -+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ -+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); -+ -+ /* set serial console to ttyS0 (ie, DBGU) */ -+ at91_set_serial_console(0); - } - - static void __init ek_init_irq(void) -@@ -163,6 +160,7 @@ - * MACB Ethernet device - */ - static struct at91_eth_data __initdata ek_macb_data = { -+ .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, - }; - -@@ -242,14 +240,12 @@ - - static void at91_lcdc_power_control(int on) - { -- if (on) -- at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */ -- else -- at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */ -+ at91_set_gpio_value(AT91_PIN_PA30, on); - } - - /* Driver datas */ - static struct atmel_lcdfb_info __initdata ek_lcdc_data = { -+ .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, -@@ -264,6 +260,55 @@ - - - /* -+ * GPIO Buttons -+ */ -+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -+static struct gpio_keys_button ek_buttons[] = { -+ { /* BP1, "leftclic" */ -+ .code = BTN_LEFT, -+ .gpio = AT91_PIN_PC5, -+ .active_low = 1, -+ .desc = "left_click", -+ .wakeup = 1, -+ }, -+ { /* BP2, "rightclic" */ -+ .code = BTN_RIGHT, -+ .gpio = AT91_PIN_PC4, -+ .active_low = 1, -+ .desc = "right_click", -+ .wakeup = 1, -+ }, -+}; -+ -+static struct gpio_keys_platform_data ek_button_data = { -+ .buttons = ek_buttons, -+ .nbuttons = ARRAY_SIZE(ek_buttons), -+}; -+ -+static struct platform_device ek_button_device = { -+ .name = "gpio-keys", -+ .id = -1, -+ .num_resources = 0, -+ .dev = { -+ .platform_data = &ek_button_data, -+ } -+}; -+ -+static void __init ek_add_device_buttons(void) -+{ -+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */ -+ at91_set_deglitch(AT91_PIN_PC5, 1); -+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */ -+ at91_set_deglitch(AT91_PIN_PC4, 1); -+ -+ platform_device_register(&ek_button_device); -+} -+#else -+static void __init ek_add_device_buttons(void) {} -+#endif -+ -+ -+/* - * AC97 - */ - static struct atmel_ac97_data ek_ac97_data = { -@@ -271,6 +316,30 @@ - }; - - -+/* -+ * LEDs ... these could all be PWM-driven, for variable brightness -+ */ -+static struct gpio_led ek_leds[] = { -+ { /* "left" led, green, userled1, pwm1 */ -+ .name = "ds1", -+ .gpio = AT91_PIN_PB8, -+ .active_low = 1, -+ .default_trigger = "mmc0", -+ }, -+ { /* "right" led, green, userled2, pwm2 */ -+ .name = "ds2", -+ .gpio = AT91_PIN_PC29, -+ .active_low = 1, -+ .default_trigger = "nand-disk", -+ }, -+ { /* "power" led, yellow, pwm0 */ -+ .name = "ds3", -+ .gpio = AT91_PIN_PB7, -+ .default_trigger = "heartbeat", -+ } -+}; -+ -+ - static void __init ek_board_init(void) - { - /* Serial */ -@@ -294,8 +363,15 @@ - at91_add_device_i2c(NULL, 0); - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); -+ /* Push Buttons */ -+ ek_add_device_buttons(); - /* AC97 */ - at91_add_device_ac97(&ek_ac97_data); -+ /* LEDs */ -+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -+ /* shutdown controller, wakeup button (5 msec low) */ -+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW -+ | AT91_SHDW_RTTWKEN); - } - - MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c ---- linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 20:39:17.000000000 +0200 -@@ -29,29 +29,24 @@ - - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> --#include <asm/arch/at91sam926x_mc.h> -+#include <asm/arch/at91_shdwc.h> - - #include "generic.h" - - --/* -- * Serial port configuration. -- * 0 .. 3 = USART0 .. USART3 -- * 4 = DBGU -- */ --static struct at91_uart_config __initdata ek_uart_config = { -- .console_tty = 0, /* ttyS0 */ -- .nr_tty = 2, -- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ --}; -- - static void __init ek_map_io(void) - { - /* Initialize processor: 12.000 MHz crystal */ - at91sam9rl_initialize(12000000); - -- /* Setup the serial ports and console */ -- at91_init_serial(&ek_uart_config); -+ /* DGBU on ttyS0. (Rx & Tx only) */ -+ at91_register_uart(0, 0, 0); -+ -+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ -+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); -+ -+ /* set serial console to ttyS0 (ie, DBGU) */ -+ at91_set_serial_console(0); - } - - static void __init ek_init_irq(void) -@@ -190,6 +185,9 @@ - at91_add_device_mmc(0, &ek_mmc_data); - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); -+ /* shutdown controller, wakeup button (5 msec low) */ -+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW -+ | AT91_SHDW_RTTWKEN); - } - - MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c ---- linux-2.6.24/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-tms.c 2007-12-31 15:18:42.000000000 +0200 -@@ -0,0 +1,198 @@ -+/* -+* linux/arch/arm/mach-at91/board-tms.c -+* -+* Copyright (C) 2005 SAN People -+* -+* Adapted from board-dk to sweda TMS-100 by Luiz de Barros <lboneto@gmail.com> -+* -+* This program is free software; you can redistribute it and/or modify -+* it under the terms of the GNU General Public License as published by -+* the Free Software Foundation; either version 2 of the License, or -+* (at your option) any later version. -+* -+* This program is distributed in the hope that it will be useful, -+* but WITHOUT ANY WARRANTY; without even the implied warranty of -+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+* GNU General Public License for more details. -+* -+* You should have received a copy of the GNU General Public License -+* along with this program; if not, write to the Free Software -+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+*/ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/mtd/physmap.h> -+ -+#include <asm/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+#include <asm/arch/at91rm9200_mc.h> -+ -+#include "generic.h" -+#include <linux/serial_8250.h> -+ -+ -+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP| UPF_SHARE_IRQ) -+#define SERIAL_CLK (1843200) -+ -+ -+/*--------------------------------------------------------------------- -+ * External UART -+ */ -+ -+#define PORT(_base, _irq) \ -+ { \ -+ .mapbase = _base, \ -+ .irq = _irq, \ -+ .uartclk = SERIAL_CLK, \ -+ .iotype = UPIO_MEM, \ -+ .regshift = 0, \ -+ .flags = SERIAL_FLAGS, \ -+ } -+ -+static struct plat_serial8250_port tms_data[] = { -+ PORT(0x70000000, AT91_PIN_PC3), -+ PORT(0x80000000, AT91_PIN_PC5), -+ { }, -+}; -+ -+static struct platform_device tms_device = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = -+ { -+ .platform_data = &tms_data, -+ }, -+}; -+ -+static void setup_external_uart(void) -+{ -+ at91_sys_write(AT91_SMC_CSR(2), -+ AT91_SMC_ACSS_STD -+ | AT91_SMC_DBW_8 -+ | AT91_SMC_BAT -+ | AT91_SMC_WSEN -+ | AT91_SMC_NWS_(32) /* wait states */ -+ | AT91_SMC_RWSETUP_(6) /* setup time */ -+ | AT91_SMC_RWHOLD_(4) /* hold time */ -+ -+ ); -+ at91_sys_write(AT91_SMC_CSR(6), -+ AT91_SMC_ACSS_STD -+ | AT91_SMC_DBW_8 -+ | AT91_SMC_BAT -+ | AT91_SMC_WSEN -+ | AT91_SMC_NWS_(32) /* wait states */ -+ | AT91_SMC_RWSETUP_(6) /* setup time */ -+ | AT91_SMC_RWHOLD_(4) /* hold time */ -+ -+ ); -+ at91_sys_write(AT91_SMC_CSR(7), -+ AT91_SMC_ACSS_STD -+ | AT91_SMC_DBW_8 -+ | AT91_SMC_BAT -+ | AT91_SMC_WSEN -+ | AT91_SMC_NWS_(32) /* wait states */ -+ | AT91_SMC_RWSETUP_(6) /* setup time */ -+ | AT91_SMC_RWHOLD_(4) /* hold time */ -+ ); -+ -+ platform_device_register(&tms_device); -+} -+ -+ -+/* -+ * Serial port configuration. -+ * 0 .. 3 = USART0 .. USART3 -+ * 4 = DBGU -+ */ -+static struct at91_uart_config __initdata tms_uart_config = { -+ .console_tty = 0, /* ttyS0 */ -+ .nr_tty = 5, -+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */ -+}; -+ -+static void __init tms_map_io(void) -+{ -+ /* Initialize processor: 18.432 MHz crystal */ -+ at91rm9200_initialize(18432000, AT91RM9200_BGA); -+ -+ /* Setup the LEDs */ -+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); -+ -+ /* Setup the serial ports and console */ -+ at91_init_serial(&tms_uart_config); -+} -+ -+static void __init tms_init_irq(void) -+{ -+ at91rm9200_init_interrupts(NULL); -+} -+ -+ -+static struct at91_eth_data __initdata tms_eth_data = { -+ .phy_irq_pin = AT91_PIN_PC4, -+ .is_rmii = 1, -+}; -+ -+static struct at91_usbh_data __initdata tms_usbh_data = { -+ .ports = 2, -+}; -+ -+static struct spi_board_info tms_spi_devices[] = { -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 0, -+ .max_speed_hz = 15 * 1000 * 1000, -+ }, -+ { /* DataFlash chip */ -+ .modalias = "mtd_dataflash", -+ .chip_select = 1, -+ .max_speed_hz = 15 * 1000 * 1000, -+ } -+}; -+ -+static struct i2c_board_info __initdata tms_i2c_devices[] = { -+ { -+ I2C_BOARD_INFO("isl1208", 0x6f), -+ } -+}; -+ -+static void __init tms_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* Ethernet */ -+ at91_add_device_eth(&tms_eth_data); -+ at91_add_device_usbh(&tms_usbh_data); -+ /* I2C */ -+ at91_add_device_i2c(tms_i2c_devices, ARRAY_SIZE(tms_i2c_devices)); -+ /* SPI */ -+ at91_add_device_spi(tms_spi_devices, ARRAY_SIZE(tms_spi_devices)); -+ /* Two port external UART */ -+ setup_external_uart(); -+} -+ -+MACHINE_START(SWEDATMS, "Sweda TMS-100 Board") -+ /* Maintainer: Luiz de Barros */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91rm9200_timer, -+ .map_io = tms_map_io, -+ .init_irq = tms_init_irq, -+ .init_machine = tms_board_init, -+MACHINE_END -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c ---- linux-2.6.24/arch/arm/mach-at91/clock.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/clock.c 2008-02-18 18:34:06.000000000 +0200 -@@ -32,6 +32,7 @@ - #include <asm/arch/cpu.h> - - #include "clock.h" -+#include "generic.h" - - - /* -@@ -254,6 +255,23 @@ - - /*------------------------------------------------------------------------*/ - -+#ifdef CONFIG_PM -+ -+int clk_must_disable(struct clk *clk) -+{ -+ if (!at91_suspend_entering_slow_clock()) -+ return 0; -+ -+ while (clk->parent) -+ clk = clk->parent; -+ return clk != &clk32k; -+} -+EXPORT_SYMBOL(clk_must_disable); -+ -+#endif -+ -+/*------------------------------------------------------------------------*/ -+ - #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS - - /* -@@ -343,7 +361,7 @@ - EXPORT_SYMBOL(clk_set_parent); - - /* establish PCK0..PCK3 parentage and rate */ --static void init_programmable_clock(struct clk *clk) -+static void __init init_programmable_clock(struct clk *clk) - { - struct clk *parent; - u32 pckr; -@@ -574,6 +592,8 @@ - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) { - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; -+ } else if (cpu_is_at91cap9()) { -+ uhpck.pmc_mask = AT91CAP9_PMC_UHP; - } - at91_sys_write(AT91_CKGR_PLLBR, 0); - -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h ---- linux-2.6.24/arch/arm/mach-at91/generic.h 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/generic.h 2008-02-18 23:29:29.000000000 +0200 -@@ -15,6 +15,7 @@ - extern void __init at91sam9263_initialize(unsigned long main_clock); - extern void __init at91sam9rl_initialize(unsigned long main_clock); - extern void __init at91x40_initialize(unsigned long main_clock); -+extern void __init at91cap9_initialize(unsigned long main_clock); - - /* Interrupts */ - extern void __init at91rm9200_init_interrupts(unsigned int priority[]); -@@ -23,6 +24,7 @@ - extern void __init at91sam9263_init_interrupts(unsigned int priority[]); - extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); - extern void __init at91x40_init_interrupts(unsigned int priority[]); -+extern void __init at91cap9_init_interrupts(unsigned int priority[]); - extern void __init at91_aic_init(unsigned int priority[]); - - /* Timer */ -@@ -39,12 +41,16 @@ - /* Power Management */ - extern void at91_irq_suspend(void); - extern void at91_irq_resume(void); -+extern int at91_suspend_entering_slow_clock(void); - - /* GPIO */ - #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ - #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ - - struct at91_gpio_bank { -+ unsigned chipbase; /* bank's first GPIO number */ -+ void __iomem *regbase; /* base of register bank */ -+ struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */ - unsigned short id; /* peripheral ID */ - unsigned long offset; /* offset from system peripheral base */ - struct clk *clock; /* associated clock */ -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c ---- linux-2.6.24/arch/arm/mach-at91/gpio.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-03-01 18:01:29.000000000 +0200 -@@ -13,6 +13,8 @@ - #include <linux/errno.h> - #include <linux/interrupt.h> - #include <linux/irq.h> -+#include <linux/debugfs.h> -+#include <linux/seq_file.h> - #include <linux/kernel.h> - #include <linux/list.h> - #include <linux/module.h> -@@ -31,12 +33,10 @@ - - static inline void __iomem *pin_to_controller(unsigned pin) - { -- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS; -- - pin -= PIN_BASE; - pin /= 32; - if (likely(pin < gpio_banks)) -- return sys_base + gpio[pin].offset; -+ return gpio[pin].regbase; - - return NULL; - } -@@ -292,11 +292,11 @@ - int i; - - for (i = 0; i < gpio_banks; i++) { -- u32 pio = gpio[i].offset; -+ void __iomem *pio = gpio[i].regbase; - -- backups[i] = at91_sys_read(pio + PIO_IMR); -- at91_sys_write(pio + PIO_IDR, backups[i]); -- at91_sys_write(pio + PIO_IER, wakeups[i]); -+ backups[i] = __raw_readl(pio + PIO_IMR); -+ __raw_writel(backups[i], pio + PIO_IDR); -+ __raw_writel(wakeups[i], pio + PIO_IER); - - if (!wakeups[i]) - clk_disable(gpio[i].clock); -@@ -313,13 +313,13 @@ - int i; - - for (i = 0; i < gpio_banks; i++) { -- u32 pio = gpio[i].offset; -+ void __iomem *pio = gpio[i].regbase; - - if (!wakeups[i]) - clk_enable(gpio[i].clock); - -- at91_sys_write(pio + PIO_IDR, wakeups[i]); -- at91_sys_write(pio + PIO_IER, backups[i]); -+ __raw_writel(wakeups[i], pio + PIO_IDR); -+ __raw_writel(backups[i], pio + PIO_IER); - } - } - -@@ -359,7 +359,13 @@ - - static int gpio_irq_type(unsigned pin, unsigned type) - { -- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL; -+ switch (type) { -+ case IRQ_TYPE_NONE: -+ case IRQ_TYPE_EDGE_BOTH: -+ return 0; -+ default: -+ return -EINVAL; -+ } - } - - static struct irq_chip gpio_irqchip = { -@@ -374,20 +380,30 @@ - { - unsigned pin; - struct irq_desc *gpio; -+ struct at91_gpio_bank *bank; - void __iomem *pio; - u32 isr; - -- pio = get_irq_chip_data(irq); -+ bank = get_irq_chip_data(irq); -+ pio = bank->regbase; - - /* temporarily mask (level sensitive) parent IRQ */ - desc->chip->ack(irq); - for (;;) { -- /* reading ISR acks the pending (edge triggered) GPIO interrupt */ -+ /* Reading ISR acks pending (edge triggered) GPIO interrupts. -+ * When there none are pending, we're finished unless we need -+ * to process multiple banks (like ID_PIOCDE on sam9263). -+ */ - isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); -- if (!isr) -- break; -+ if (!isr) { -+ if (!bank->next) -+ break; -+ bank = bank->next; -+ pio = bank->regbase; -+ continue; -+ } - -- pin = (unsigned) get_irq_data(irq); -+ pin = bank->chipbase; - gpio = &irq_desc[pin]; - - while (isr) { -@@ -414,29 +430,94 @@ - - /*--------------------------------------------------------------------------*/ - -+#ifdef CONFIG_DEBUG_FS -+ -+static int at91_gpio_show(struct seq_file *s, void *unused) -+{ -+ int bank, j; -+ -+ /* print heading */ -+ seq_printf(s, "Pin\t"); -+ for (bank = 0; bank < gpio_banks; bank++) { -+ seq_printf(s, "PIO%c\t", 'A' + bank); -+ }; -+ seq_printf(s, "\n\n"); -+ -+ /* print pin status */ -+ for (j = 0; j < 32; j++) { -+ seq_printf(s, "%i:\t", j); -+ -+ for (bank = 0; bank < gpio_banks; bank++) { -+ unsigned pin = PIN_BASE + (32 * bank) + j; -+ void __iomem *pio = pin_to_controller(pin); -+ unsigned mask = pin_to_mask(pin); -+ -+ if (__raw_readl(pio + PIO_PSR) & mask) -+ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); -+ else -+ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A"); -+ -+ seq_printf(s, "\t"); -+ } -+ -+ seq_printf(s, "\n"); -+ } -+ -+ return 0; -+} -+ -+static int at91_gpio_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, at91_gpio_show, NULL); -+} -+ -+static const struct file_operations at91_gpio_operations = { -+ .open = at91_gpio_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static int __init at91_gpio_debugfs_init(void) -+{ -+ /* /sys/kernel/debug/at91_gpio */ -+ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations); -+ return 0; -+} -+postcore_initcall(at91_gpio_debugfs_init); -+ -+#endif -+ -+/*--------------------------------------------------------------------------*/ -+ -+/* -+ * This lock class tells lockdep that GPIO irqs are in a different -+ * category than their parents, so it won't report false recursion. -+ */ -+static struct lock_class_key gpio_lock_class; -+ - /* - * Called from the processor-specific init to enable GPIO interrupt support. - */ - void __init at91_gpio_irq_setup(void) - { -- unsigned pioc, pin; -+ unsigned pioc, pin; -+ struct at91_gpio_bank *this, *prev; - -- for (pioc = 0, pin = PIN_BASE; -- pioc < gpio_banks; -- pioc++) { -- void __iomem *controller; -- unsigned id = gpio[pioc].id; -+ for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL; -+ pioc++ < gpio_banks; -+ prev = this, this++) { -+ unsigned id = this->id; - unsigned i; - -- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */ -+ /* enable PIO controller's clock */ -+ clk_enable(this->clock); - -- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset; -- __raw_writel(~0, controller + PIO_IDR); -+ __raw_writel(~0, this->regbase + PIO_IDR); - -- set_irq_data(id, (void *) pin); -- set_irq_chip_data(id, controller); -+ for (i = 0, pin = this->chipbase; i < 32; i++, pin++) { -+ lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class); - -- for (i = 0; i < 32; i++, pin++) { - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. -@@ -446,6 +527,14 @@ - set_irq_flags(pin, IRQF_VALID); - } - -+ /* The toplevel handler handles one bank of GPIOs, except -+ * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in -+ * the list, so we only set up that handler. -+ */ -+ if (prev && prev->next == this) -+ continue; -+ -+ set_irq_chip_data(id, this); - set_irq_chained_handler(id, gpio_irq_handler); - } - pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); -@@ -456,8 +545,21 @@ - */ - void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) - { -+ unsigned i; -+ struct at91_gpio_bank *last; -+ - BUG_ON(nr_banks > MAX_GPIO_BANKS); - - gpio = data; - gpio_banks = nr_banks; -+ -+ for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) { -+ data->chipbase = PIN_BASE + i * 32; -+ data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS; -+ -+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ -+ /* AT91CAP9_ID_PIOABCD groups PIOA, PIOB, PIOC, PIOD */ -+ if (last && last->id == data->id) -+ last->next = data; -+ } - } -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c ---- linux-2.6.24/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-03-01 22:05:07.000000000 +0200 -@@ -0,0 +1,208 @@ -+/* -+ * arch/arm/mach-at91rm9200/ics1523.c -+ * -+ * Copyright (C) 2003 ATMEL Rousset -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <asm/hardware.h> -+#include <asm/io.h> -+ -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/err.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+ -+#include <asm/arch/ics1523.h> -+#include <asm/arch/at91_twi.h> -+#include <asm/arch/gpio.h> -+ -+/* TWI Errors */ -+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE) -+ -+ -+static void __iomem *twi_base; -+ -+#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) -+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) -+ -+ -+/* ----------------------------------------------------------------------------- -+ * Initialization of TWI CLOCK -+ * ----------------------------------------------------------------------------- */ -+ -+static void at91_ics1523_SetTwiClock(unsigned int mck_khz) -+{ -+ int sclock; -+ -+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */ -+ sclock = (10*mck_khz / ICS_TRANSFER_RATE); -+ if (sclock % 10 >= 5) -+ sclock = (sclock /10) - 5; -+ else -+ sclock = (sclock /10)- 6; -+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */ -+ -+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8)); -+} -+ -+/* ----------------------------------------------------------------------------- -+ * Read a byte with TWI Interface from the Clock Generator ICS1523 -+ * ----------------------------------------------------------------------------- */ -+ -+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in) -+{ -+ int Status, nb_trial; -+ -+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR)); -+ at91_twi_write(AT91_TWI_IADR, reg_address); -+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); -+ -+ /* Program temporizing period (300us) */ -+ udelay(300); -+ -+ /* Wait TXcomplete ... */ -+ nb_trial = 0; -+ Status = at91_twi_read(AT91_TWI_SR); -+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) { -+ nb_trial++; -+ Status = at91_twi_read(AT91_TWI_SR); -+ } -+ -+ if (Status & AT91_TWI_TXCOMP) { -+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR); -+ return ICS1523_ACCESS_OK; -+ } -+ else -+ return ICS1523_ACCESS_ERROR; -+} -+ -+/* ----------------------------------------------------------------------------- -+ * Write a byte with TWI Interface to the Clock Generator ICS1523 -+ * ----------------------------------------------------------------------------- */ -+ -+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out) -+{ -+ int Status, nb_trial; -+ -+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR)); -+ at91_twi_write(AT91_TWI_IADR, reg_address); -+ at91_twi_write(AT91_TWI_THR, data_out); -+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); -+ -+ /* Program temporizing period (300us) */ -+ udelay(300); -+ -+ nb_trial = 0; -+ Status = at91_twi_read(AT91_TWI_SR); -+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) { -+ nb_trial++; -+ if (Status & AT91_TWI_ERROR) { -+ /* If Underrun OR NACK - Start again */ -+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); -+ -+ /* Program temporizing period (300us) */ -+ udelay(300); -+ } -+ Status = at91_twi_read(AT91_TWI_SR); -+ }; -+ -+ if (Status & AT91_TWI_TXCOMP) -+ return ICS1523_ACCESS_OK; -+ else -+ return ICS1523_ACCESS_ERROR; -+} -+ -+/* ----------------------------------------------------------------------------- -+ * Initialization of the Clock Generator ICS1523 -+ * ----------------------------------------------------------------------------- */ -+ -+int at91_ics1523_init(void) -+{ -+ int nb_trial; -+ int ack = ICS1523_ACCESS_OK; -+ unsigned int status = 0xffffffff; -+ struct clk *twi_clk; -+ -+ /* Map in TWI peripheral */ -+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K); -+ if (!twi_base) -+ return -ENOMEM; -+ -+ /* pins used for TWI interface */ -+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ -+ at91_set_multi_drive(AT91_PIN_PA25, 1); -+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ -+ at91_set_multi_drive(AT91_PIN_PA26, 1); -+ -+ /* Enable the TWI clock */ -+ twi_clk = clk_get(NULL, "twi_clk"); -+ if (IS_ERR(twi_clk)) -+ return ICS1523_ACCESS_ERROR; -+ clk_enable(twi_clk); -+ -+ /* Disable interrupts */ -+ at91_twi_write(AT91_TWI_IDR, -1); -+ -+ /* Reset peripheral */ -+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); -+ -+ /* Set Master mode */ -+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); -+ -+ /* Set TWI Clock Waveform Generator Register */ -+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */ -+ -+ /* ICS1523 Initialisation */ -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0); -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK)); -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F)); -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0); -+ -+ nb_trial = 0; -+ do { -+ nb_trial++; -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/)); -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD)); -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */ -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00); -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR)); -+ -+ /* Program 1ms temporizing period */ -+ mdelay(1); -+ -+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status); -+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10)); -+ -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */ -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR)); -+ -+ /* Program 1ms temporizing period */ -+ mdelay(1); -+ -+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00); -+ -+ /* Program 1ms temporizing period */ -+ mdelay(1); -+ -+ /* All done - cleanup */ -+ iounmap(twi_base); -+ clk_disable(twi_clk); -+ clk_put(twi_clk); -+ -+ return ack; -+} -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/leds.c linux-2.6/arch/arm/mach-at91/leds.c ---- linux-2.6.24/arch/arm/mach-at91/leds.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/leds.c 2008-02-18 22:20:11.000000000 +0200 -@@ -14,11 +14,63 @@ - #include <linux/init.h> - - #include <asm/mach-types.h> --#include <asm/leds.h> - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> - - -+/* ------------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_NEW_LEDS) -+ -+#include <linux/platform_device.h> -+ -+/* -+ * New cross-platform LED support. -+ */ -+ -+static struct gpio_led_platform_data led_data; -+ -+static struct platform_device at91_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev.platform_data = &led_data, -+}; -+ -+void __init at91_gpio_leds(struct gpio_led *leds, int nr) -+{ -+ int i; -+ -+ if (!nr) -+ return; -+ -+ for (i = 0; i < nr; i++) -+ at91_set_gpio_output(leds[i].gpio, leds[i].active_low); -+ -+ led_data.leds = leds; -+ led_data.num_leds = nr; -+ platform_device_register(&at91_leds); -+} -+ -+#else -+void __init at91_gpio_leds(struct gpio_led *leds, int nr) {} -+#endif -+ -+ -+/* ------------------------------------------------------------------------- */ -+ -+#if defined(CONFIG_LEDS) -+ -+#include <asm/leds.h> -+ -+/* -+ * Old ARM-specific LED framework; not fully functional when generic time is -+ * in use. -+ */ -+ -+static u8 at91_leds_cpu; -+static u8 at91_leds_timer; -+ -+ - static inline void at91_led_on(unsigned int led) - { - at91_set_gpio_value(led, 0); -@@ -93,3 +145,18 @@ - } - - __initcall(leds_init); -+ -+ -+void __init at91_init_leds(u8 cpu_led, u8 timer_led) -+{ -+ /* Enable GPIO to access the LEDs */ -+ at91_set_gpio_output(cpu_led, 1); -+ at91_set_gpio_output(timer_led, 1); -+ -+ at91_leds_cpu = cpu_led; -+ at91_leds_timer = timer_led; -+} -+ -+#else -+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -+#endif -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c ---- linux-2.6.24/arch/arm/mach-at91/pm.c 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/pm.c 2008-03-01 22:05:23.000000000 +0200 -@@ -26,12 +26,140 @@ - #include <asm/mach-types.h> - - #include <asm/arch/at91_pmc.h> --#include <asm/arch/at91rm9200_mc.h> - #include <asm/arch/gpio.h> - #include <asm/arch/cpu.h> - - #include "generic.h" - -+#ifdef CONFIG_ARCH_AT91RM9200 -+#include <asm/arch/at91rm9200_mc.h> -+ -+/* -+ * The AT91RM9200 goes into self-refresh mode with this command, and will -+ * terminate self-refresh automatically on the next SDRAM access. -+ */ -+#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1) -+#define sdram_selfrefresh_disable() do {} while (0) -+ -+#elif defined(CONFIG_ARCH_AT91CAP9) -+#include <asm/arch/at91cap9_ddrsdr.h> -+ -+static u32 saved_lpr; -+ -+static inline void sdram_selfrefresh_enable(void) -+{ -+ u32 lpr; -+ -+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); -+ -+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; -+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); -+} -+ -+#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) -+ -+#else -+#include <asm/arch/at91sam926x_sdramc.h> -+ -+static u32 saved_lpr; -+ -+static inline void sdram_selfrefresh_enable(void) -+{ -+ u32 lpr; -+ -+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); -+ -+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB; -+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); -+} -+ -+#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) -+ -+/* -+ * FIXME: The AT91SAM9263 has a second EBI controller which may have -+ * additional SDRAM. pm_slowclock.S will require a similar fix. -+ */ -+ -+#endif -+ -+ -+#if defined(AT91_SHDWC) -+ -+#include <asm/arch/at91_rstc.h> -+#include <asm/arch/at91_shdwc.h> -+ -+/* -+ * Show the reason for the previous system reset. -+ */ -+static void __init show_reset_status(void) -+{ -+ static char reset[] __initdata = "reset"; -+ -+ static char general[] __initdata = "general"; -+ static char wakeup[] __initdata = "wakeup"; -+ static char watchdog[] __initdata = "watchdog"; -+ static char software[] __initdata = "software"; -+ static char user[] __initdata = "user"; -+ static char unknown[] __initdata = "unknown"; -+ -+ static char signal[] __initdata = "signal"; -+ static char rtc[] __initdata = "rtc"; -+ static char rtt[] __initdata = "rtt"; -+ static char restore[] __initdata = "power-restored"; -+ -+ char *reason, *r2 = reset; -+ u32 reset_type, wake_type; -+ -+ reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; -+ wake_type = at91_sys_read(AT91_SHDW_SR); -+ -+ switch (reset_type) { -+ case AT91_RSTC_RSTTYP_GENERAL: -+ reason = general; -+ break; -+ case AT91_RSTC_RSTTYP_WAKEUP: -+ /* board-specific code enabled the wakeup sources */ -+ reason = wakeup; -+ -+ /* "wakeup signal" */ -+ if (wake_type & AT91_SHDW_WAKEUP0) -+ r2 = signal; -+ else { -+ r2 = reason; -+ if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ -+ reason = rtt; -+ else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ -+ reason = rtc; -+ else if (wake_type == 0) /* power-restored wakeup */ -+ reason = restore; -+ else /* unknown wakeup */ -+ reason = unknown; -+ } -+ break; -+ case AT91_RSTC_RSTTYP_WATCHDOG: -+ reason = watchdog; -+ break; -+ case AT91_RSTC_RSTTYP_SOFTWARE: -+ reason = software; -+ break; -+ case AT91_RSTC_RSTTYP_USER: -+ reason = user; -+ break; -+ default: -+ reason = unknown; -+ break; -+ } -+ pr_info("AT91: Starting after %s %s\n", reason, r2); -+} -+#else -+static void __init show_reset_status(void) {} -+#endif -+ -+#ifdef CONFIG_AT91_SLOW_CLOCK -+extern void at91_slow_clock(void); -+extern u32 at91_slow_clock_sz; -+#endif -+ - - static int at91_pm_valid_state(suspend_state_t state) - { -@@ -62,6 +190,7 @@ - * Verify that all the clocks are correct before entering - * slow-clock mode. - */ -+#warning "This should probably be moved to clocks.c" - static int at91_pm_verify_clocks(void) - { - unsigned long scsr; -@@ -80,6 +209,11 @@ - pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } -+ } else if (cpu_is_at91cap9()) { -+ if ((scsr & AT91CAP9_PMC_UHP) != 0) { -+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); -+ return 0; -+ } - } - - #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS -@@ -102,20 +236,15 @@ - } - - /* -- * Call this from platform driver suspend() to see how deeply to suspend. -+ * This is called from clk_must_disable(), to see how deeply to suspend. - * For example, some controllers (like OHCI) need one of the PLL clocks - * in order to act as a wakeup source, and those are not available when - * going into slow clock mode. -- * -- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have -- * the very same problem (but not using at91 main_clk), and it'd be better -- * to add one generic API rather than lots of platform-specific ones. - */ - int at91_suspend_entering_slow_clock(void) - { - return (target_state == PM_SUSPEND_MEM); - } --EXPORT_SYMBOL(at91_suspend_entering_slow_clock); - - - static void (*slow_clock)(void); -@@ -153,11 +282,12 @@ - * turning off the main oscillator; reverse on wakeup. - */ - if (slow_clock) { -+ /* copy slow_clock handler to SRAM, and call it */ -+ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); - slow_clock(); - break; - } else { -- /* DEVELOPMENT ONLY */ -- pr_info("AT91: PM - no slow clock mode yet ...\n"); -+ pr_info("AT91: PM - no slow clock mode enabled ...\n"); - /* FALLTHROUGH leaving master clock alone */ - } - -@@ -170,13 +300,15 @@ - case PM_SUSPEND_STANDBY: - /* - * NOTE: the Wait-for-Interrupt instruction needs to be -- * in icache so the SDRAM stays in self-refresh mode until -- * the wakeup IRQ occurs. -+ * in icache so no SDRAM accesses are needed until the -+ * wakeup IRQ occurs and self-refresh is terminated. - */ - asm("b 1f; .align 5; 1:"); - asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ -- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */ -- /* fall though to next state */ -+ sdram_selfrefresh_enable(); -+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ -+ sdram_selfrefresh_disable(); -+ break; - - case PM_SUSPEND_ON: - asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ -@@ -191,6 +323,7 @@ - at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); - - error: -+ sdram_selfrefresh_disable(); - target_state = PM_SUSPEND_ON; - at91_irq_resume(); - at91_gpio_resume(); -@@ -204,23 +337,24 @@ - .enter = at91_pm_enter, - }; - -+ - static int __init at91_pm_init(void) - { -- printk("AT91: Power Management\n"); -- --#ifdef CONFIG_AT91_PM_SLOW_CLOCK -- /* REVISIT allocations of SRAM should be dynamically managed. -- * FIQ handlers and other components will want SRAM/TCM too... -- */ -- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); -- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); -+#ifdef CONFIG_AT91_SLOW_CLOCK -+ slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz); -+ pr_info("AT91: Power Management (with slow clock mode)\n"); -+#else -+ pr_info("AT91: Power Management\n"); - #endif - -- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ -+#ifdef CONFIG_ARCH_AT91RM9200 -+ /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ - at91_sys_write(AT91_SDRAMC_LPR, 0); -+#endif - - suspend_set_ops(&at91_pm_ops); - -+ show_reset_status(); - return 0; - } - arch_initcall(at91_pm_init); -diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S ---- linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-03-01 21:38:50.000000000 +0200 -@@ -0,0 +1,273 @@ -+/* -+ * arch/arm/mach-at91/pm_slow_clock.S -+ * -+ * Copyright (C) 2006 Savin Zlobec -+ * -+ * AT91SAM9 support: -+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/linkage.h> -+#include <asm/hardware.h> -+#include <asm/arch/at91_pmc.h> -+ -+#ifdef CONFIG_ARCH_AT91RM9200 -+#include <asm/arch/at91rm9200_mc.h> -+#elif defined(CONFIG_ARCH_AT91CAP9) -+#include <asm/arch/at91cap9_ddrsdr.h> -+#else -+#include <asm/arch/at91sam926x_sdramc.h> -+#endif -+ -+/* -+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master -+ * clock during suspend by adjusting its prescalar and divisor. -+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there -+ * are errata regarding adjusting the prescalar and divisor. -+ */ -+#undef SLOWDOWN_MASTER_CLOCK -+ -+#define MCKRDY_TIMEOUT 1000 -+#define MOSCRDY_TIMEOUT 1000 -+#define PLLALOCK_TIMEOUT 1000 -+#define PLLBLOCK_TIMEOUT 1000 -+ -+ -+/* -+ * Wait until master clock is ready (after switching master clock source) -+ */ -+ .macro wait_mckrdy -+ mov r4, #MCKRDY_TIMEOUT -+1: sub r4, r4, #1 -+ cmp r4, #0 -+ beq 2f -+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] -+ tst r3, #AT91_PMC_MCKRDY -+ beq 1b -+2: -+ .endm -+ -+/* -+ * Wait until master oscillator has stabilized. -+ */ -+ .macro wait_moscrdy -+ mov r4, #MOSCRDY_TIMEOUT -+1: sub r4, r4, #1 -+ cmp r4, #0 -+ beq 2f -+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] -+ tst r3, #AT91_PMC_MOSCS -+ beq 1b -+2: -+ .endm -+ -+/* -+ * Wait until PLLA has locked. -+ */ -+ .macro wait_pllalock -+ mov r4, #PLLALOCK_TIMEOUT -+1: sub r4, r4, #1 -+ cmp r4, #0 -+ beq 2f -+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] -+ tst r3, #AT91_PMC_LOCKA -+ beq 1b -+2: -+ .endm -+ -+/* -+ * Wait until PLLB has locked. -+ */ -+ .macro wait_pllblock -+ mov r4, #PLLBLOCK_TIMEOUT -+1: sub r4, r4, #1 -+ cmp r4, #0 -+ beq 2f -+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] -+ tst r3, #AT91_PMC_LOCKB -+ beq 1b -+2: -+ .endm -+ -+ .text -+ -+ENTRY(at91_slow_clock) -+ /* Save registers on stack */ -+ stmfd sp!, {r0 - r12, lr} -+ -+ /* -+ * Register usage: -+ * R1 = Base address of AT91_PMC -+ * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200) -+ * R3 = temporary register -+ * R4 = temporary register -+ */ -+ ldr r1, .at91_va_base_pmc -+ ldr r2, .at91_va_base_sdramc -+ -+ /* Drain write buffer */ -+ mcr p15, 0, r0, c7, c10, 4 -+ -+#ifdef CONFIG_ARCH_AT91RM9200 -+ /* Put SDRAM in self-refresh mode */ -+ mov r3, #1 -+ str r3, [r2, #AT91_SDRAMC_SRR] -+#elif defined(CONFIG_ARCH_AT91CAP9) -+ /* Enable SDRAM self-refresh mode */ -+ ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] -+ str r3, .saved_sam9_lpr -+ -+ mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH -+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] -+#else -+ /* Enable SDRAM self-refresh mode */ -+ ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] -+ str r3, .saved_sam9_lpr -+ -+ mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH -+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] -+#endif -+ -+ /* Save Master clock setting */ -+ ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] -+ str r3, .saved_mckr -+ -+ /* -+ * Set the Master clock source to slow clock -+ */ -+ bic r3, r3, #AT91_PMC_CSS -+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] -+ -+ wait_mckrdy -+ -+#ifdef SLOWDOWN_MASTER_CLOCK -+ /* -+ * Set the Master Clock PRES and MDIV fields. -+ * -+ * See AT91RM9200 errata #27 and #28 for details. -+ */ -+ mov r3, #0 -+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] -+ -+ wait_mckrdy -+#endif -+ -+ /* Save PLLA setting and disable it */ -+ ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] -+ str r3, .saved_pllar -+ -+ mov r3, #AT91_PMC_PLLCOUNT -+ orr r3, r3, #(1 << 29) /* bit 29 always set */ -+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] -+ -+ wait_pllalock -+ -+ /* Save PLLB setting and disable it */ -+ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] -+ str r3, .saved_pllbr -+ -+ mov r3, #AT91_PMC_PLLCOUNT -+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] -+ -+ wait_pllblock -+ -+ /* Turn off the main oscillator */ -+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] -+ bic r3, r3, #AT91_PMC_MOSCEN -+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] -+ -+ /* Wait for interrupt */ -+ mcr p15, 0, r0, c7, c0, 4 -+ -+ /* Turn on the main oscillator */ -+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] -+ orr r3, r3, #AT91_PMC_MOSCEN -+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] -+ -+ wait_moscrdy -+ -+ /* Restore PLLB setting */ -+ ldr r3, .saved_pllbr -+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] -+ -+ wait_pllblock -+ -+ /* Restore PLLA setting */ -+ ldr r3, .saved_pllar -+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] -+ -+ wait_pllalock -+ -+#ifdef SLOWDOWN_MASTER_CLOCK -+ /* -+ * First set PRES if it was not 0, -+ * than set CSS and MDIV fields. -+ * -+ * See AT91RM9200 errata #27 and #28 for details. -+ */ -+ ldr r3, .saved_mckr -+ tst r3, #AT91_PMC_PRES -+ beq 2f -+ and r3, r3, #AT91_PMC_PRES -+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] -+ -+ wait_mckrdy -+#endif -+ -+ /* -+ * Restore master clock setting -+ */ -+2: ldr r3, .saved_mckr -+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] -+ -+ wait_mckrdy -+ -+#ifdef CONFIG_ARCH_AT91RM9200 -+ /* Do nothing - self-refresh is automatically disabled. */ -+#elif defined(CONFIG_ARCH_AT91CAP9) -+ /* Restore LPR on AT91CAP9 */ -+ ldr r3, .saved_sam9_lpr -+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] -+#else -+ /* Restore LPR on AT91SAM9 */ -+ ldr r3, .saved_sam9_lpr -+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] -+#endif -+ -+ /* Restore registers, and return */ -+ ldmfd sp!, {r0 - r12, pc} -+ -+ -+.saved_mckr: -+ .word 0 -+ -+.saved_pllar: -+ .word 0 -+ -+.saved_pllbr: -+ .word 0 -+ -+.saved_sam9_lpr: -+ .word 0 -+ -+.at91_va_base_pmc: -+ .word AT91_VA_BASE_SYS + AT91_PMC -+ -+#ifdef CONFIG_ARCH_AT91RM9200 -+.at91_va_base_sdramc: -+ .word AT91_VA_BASE_SYS -+#elif defined(CONFIG_ARCH_AT91CAP9) -+.at91_va_base_sdramc: -+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC -+#else -+.at91_va_base_sdramc: -+ .word AT91_VA_BASE_SYS + AT91_SDRAMC -+#endif -+ -+ENTRY(at91_slow_clock_sz) -+ .word .-at91_slow_clock -diff -urN -x CVS linux-2.6.24/arch/arm/mm/Kconfig linux-2.6/arch/arm/mm/Kconfig ---- linux-2.6.24/arch/arm/mm/Kconfig 2008-03-01 22:02:07.000000000 +0200 -+++ linux-2.6/arch/arm/mm/Kconfig 2008-01-16 20:26:55.000000000 +0200 -@@ -171,8 +171,8 @@ - # ARM926T - config CPU_ARM926T - bool "Support ARM926T processor" -- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI -- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI -+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI -+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI - select CPU_32v5 - select CPU_ABRT_EV5TJ - select CPU_CACHE_VIVT -diff -urN -x CVS linux-2.6.24/arch/arm/tools/mach-types linux-2.6/arch/arm/tools/mach-types ---- linux-2.6.24/arch/arm/tools/mach-types 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/tools/mach-types 2008-01-16 21:25:12.000000000 +0200 -@@ -12,7 +12,7 @@ - # - # http://www.arm.linux.org.uk/developer/machines/?action=new - # --# Last update: Fri May 11 19:53:41 2007 -+# Last update: Mon Nov 12 14:39:37 2007 - # - # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number - # -@@ -266,7 +266,7 @@ - wismo SA1100_WISMO WISMO 249 - ezlinx ARCH_EZLINX EZLINX 250 - at91rm9200 ARCH_AT91RM9200 AT91RM9200 251 --orion ARCH_ORION ORION 252 -+adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252 - neptune ARCH_NEPTUNE NEPTUNE 253 - hackkit SA1100_HACKKIT HACKKIT 254 - pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255 -@@ -661,7 +661,7 @@ - pnx0105 MACH_PNX0105 PNX0105 646 - adcpoecpu MACH_ADCPOECPU ADCPOECPU 647 - csb637 MACH_CSB637 CSB637 648 --ml69q6203 MACH_ML69Q6203 ML69Q6203 649 -+ml675050 MACH_ML69Q6203 ML69Q6203 649 - mb9200 MACH_MB9200 MB9200 650 - kulun MACH_KULUN KULUN 651 - snapper MACH_SNAPPER SNAPPER 652 -@@ -953,7 +953,7 @@ - ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 - nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 - netdcu8 MACH_NETDCU8 NETDCU8 942 --ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 -+ml675050_dev_sys MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 - ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 - ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 - pnx4103 MACH_PNX4103 PNX4103 946 -@@ -1148,7 +1148,7 @@ - rema MACH_REMA REMA 1135 - bps1000 MACH_BPS1000 BPS1000 1136 - hw90350 MACH_HW90350 HW90350 1137 --omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138 -+omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 - bluetouch MACH_BLUETOUCH BLUETOUCH 1139 - vstms MACH_VSTMS VSTMS 1140 - xsbase270 MACH_XSBASE270 XSBASE270 1141 -@@ -1214,7 +1214,7 @@ - kbat9261 MACH_KBAT9261 KBAT9261 1204 - ct1100 MACH_CT1100 CT1100 1205 - akcppxa MACH_AKCPPXA AKCPPXA 1206 --zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207 -+ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207 - hitrack MACH_HITRACK HITRACK 1208 - syme1 MACH_SYME1 SYME1 1209 - syhl1 MACH_SYHL1 SYHL1 1210 -@@ -1299,7 +1299,7 @@ - h4300 MACH_H4300 H4300 1291 - goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292 - mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293 --adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294 -+adsbitsyg5 MACH_ADSBITSIMX ADSBITSIMX 1294 - adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295 - mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296 - em_x270 MACH_EM_X270 EM_X270 1297 -@@ -1367,3 +1367,190 @@ - csb726 MACH_CSB726 CSB726 1359 - tik27 MACH_TIK27 TIK27 1360 - mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 -+rirm3 MACH_RIRM3 RIRM3 1362 -+pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363 -+arm920t MACH_ARM920T ARM920T 1364 -+add_abox MACH_ADD_ABOX ADD_ABOX 1365 -+add_tpid MACH_ADD_TPID ADD_TPID 1366 -+minicheck MACH_MINICHECK MINICHECK 1367 -+idam MACH_IDAM IDAM 1368 -+mario_mx MACH_MARIO_MX MARIO_MX 1369 -+vi1888 MACH_VI1888 VI1888 1370 -+zr4230 MACH_ZR4230 ZR4230 1371 -+t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372 -+syhq2 MACH_SYHQ2 SYHQ2 1373 -+computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374 -+oratis MACH_ORATIS ORATIS 1375 -+mikko MACH_MIKKO MIKKO 1376 -+holon MACH_HOLON HOLON 1377 -+olip8 MACH_OLIP8 OLIP8 1378 -+ghi270hg MACH_GHI270HG GHI270HG 1379 -+davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 -+davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381 -+ocearm MACH_OCEARMTEST OCEARMTEST 1382 -+blackriver MACH_BLACKRIVER BLACKRIVER 1383 -+sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384 -+cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385 -+quark963 MACH_QUARK963 QUARK963 1386 -+csb735 MACH_CSB735 CSB735 1387 -+littleton MACH_LITTLETON LITTLETON 1388 -+mio_p550 MACH_MIO_P550 MIO_P550 1389 -+motion2440 MACH_MOTION2440 MOTION2440 1390 -+imm500 MACH_IMM500 IMM500 1391 -+homematic MACH_HOMEMATIC HOMEMATIC 1392 -+ermine MACH_ERMINE ERMINE 1393 -+kb9202b MACH_KB9202B KB9202B 1394 -+hs1xx MACH_HS1XX HS1XX 1395 -+studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396 -+arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397 -+dep2410k MACH_DEP2410K DEP2410K 1398 -+xxsvideo MACH_XXSVIDEO XXSVIDEO 1399 -+im4004 MACH_IM4004 IM4004 1400 -+ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401 -+lep9261 MACH_LEP9261 LEP9261 1402 -+svenmeb MACH_SVENMEB SVENMEB 1403 -+fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404 -+omap2 MACH_OMAP2 OMAP2 1405 -+nxhx MACH_NXHX NXHX 1406 -+realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 -+ids500 MACH_IDS500 IDS500 1408 -+ors_n725 MACH_ORS_N725 ORS_N725 1409 -+hsdarm MACH_HSDARM HSDARM 1410 -+sha_pon003 MACH_SHA_PON003 SHA_PON003 1411 -+sha_pon004 MACH_SHA_PON004 SHA_PON004 1412 -+sha_pon007 MACH_SHA_PON007 SHA_PON007 1413 -+sha_pon011 MACH_SHA_PON011 SHA_PON011 1414 -+h6042 MACH_H6042 H6042 1415 -+h6043 MACH_H6043 H6043 1416 -+looxc550 MACH_LOOXC550 LOOXC550 1417 -+cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 -+app3xx MACH_APP3XX APP3XX 1419 -+sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -+xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421 -+xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422 -+xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423 -+xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424 -+ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 -+sarge MACH_SARGE SARGE 1426 -+a696 MACH_A696 A696 1427 -+turtle1916 MACH_TURTLE TURTLE 1428 -+pxa1916 MACH_MY5910TURTLE MY5910TURTLE 1429 -+mx27_3ds MACH_MX27_3DS MX27_3DS 1430 -+bishop MACH_BISHOP BISHOP 1431 -+pxx MACH_PXX PXX 1432 -+redwood MACH_REDWOOD REDWOOD 1433 -+dummy MACH_OMAP2430DLP OMAP2430DLP 1434 -+dummy_board MACH_OMAP2430OSK OMAP2430OSK 1435 -+omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436 -+omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437 -+sardine MACH_SARDINE SARDINE 1438 -+halibut MACH_HALIBUT HALIBUT 1439 -+trout MACH_TROUT TROUT 1440 -+goldfish MACH_GOLDFISH GOLDFISH 1441 -+gesbc2440 MACH_GESBC2440 GESBC2440 1442 -+nomad MACH_NOMAD NOMAD 1443 -+rosalind MACH_ROSALIND ROSALIND 1444 -+cc9p9215 MACH_CC9P9215 CC9P9215 1445 -+cc9p9210 MACH_CC9P9210 CC9P9210 1446 -+cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447 -+cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448 -+nasffe MACH_NASFFE NASFFE 1449 -+tn2x0bd MACH_TN2X0BD TN2X0BD 1450 -+gwmpxa MACH_GWMPXA GWMPXA 1451 -+exyplus MACH_EXYPLUS EXYPLUS 1452 -+jadoo21 MACH_JADOO21 JADOO21 1453 -+looxn560 MACH_LOOXN560 LOOXN560 1454 -+bonsai MACH_BONSAI BONSAI 1455 -+adsmilgato MACH_ADSMILGATO ADSMILGATO 1456 -+gba MACH_GBA GBA 1457 -+h6044 MACH_H6044 H6044 1458 -+app MACH_APP APP 1459 -+tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460 -+herald MACH_HERMES HERMES 1461 -+artemis MACH_ARTEMIS ARTEMIS 1462 -+htctitan MACH_HTCTITAN HTCTITAN 1463 -+qranium MACH_QRANIUM QRANIUM 1464 -+add_wsc2 MACH_ADD_WSC2 ADD_WSC2 1465 -+add_medinet MACH_ADD_MEDINET ADD_MEDINET 1466 -+bboard MACH_BBOARD BBOARD 1467 -+cambria MACH_CAMBRIA CAMBRIA 1468 -+mt7xxx MACH_MT7XXX MT7XXX 1469 -+matrix512 MACH_MATRIX512 MATRIX512 1470 -+matrix522 MACH_MATRIX522 MATRIX522 1471 -+ipac5010 MACH_IPAC5010 IPAC5010 1472 -+sakura MACH_SAKURA SAKURA 1473 -+grocx MACH_GROCX GROCX 1474 -+pm9263 MACH_PM9263 PM9263 1475 -+sim_one MACH_SIM_ONE SIM_ONE 1476 -+acq132 MACH_ACQ132 ACQ132 1477 -+datr MACH_DATR DATR 1478 -+actux1 MACH_ACTUX1 ACTUX1 1479 -+actux2 MACH_ACTUX2 ACTUX2 1480 -+actux3 MACH_ACTUX3 ACTUX3 1481 -+flexit MACH_FLEXIT FLEXIT 1482 -+bh2x0bd MACH_BH2X0BD BH2X0BD 1483 -+atb2002 MACH_ATB2002 ATB2002 1484 -+xenon MACH_XENON XENON 1485 -+fm607 MACH_FM607 FM607 1486 -+matrix514 MACH_MATRIX514 MATRIX514 1487 -+matrix524 MACH_MATRIX524 MATRIX524 1488 -+inpod MACH_INPOD INPOD 1489 -+jive MACH_JIVE JIVE 1490 -+tll_mx21 MACH_TLL_MX21 TLL_MX21 1491 -+sbc2800 MACH_SBC2800 SBC2800 1492 -+cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493 -+ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494 -+ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495 -+ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496 -+aml_m8000 MACH_AML_M8000 AML_M8000 1497 -+snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498 -+omap_bbx MACH_OMAP_BBX OMAP_BBX 1499 -+ucn2410 MACH_UCN2410 UCN2410 1500 -+sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501 -+eti_c2 MACH_ETI_C2 ETI_C2 1502 -+avalanche MACH_AVALANCHE AVALANCHE 1503 -+realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504 -+dp1500 MACH_DP1500 DP1500 1505 -+apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506 -+yl9200 MACH_YL9200 YL9200 1507 -+rd88f5182 MACH_RD88F5182 RD88F5182 1508 -+kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509 -+se_poet MACH_SE_POET SE_POET 1510 -+mx31_3ds MACH_MX31_3DS MX31_3DS 1511 -+r270 MACH_R270 R270 1512 -+armour21 MACH_ARMOUR21 ARMOUR21 1513 -+dt2 MACH_DT2 DT2 1514 -+vt4 MACH_VT4 VT4 1515 -+tyco320 MACH_TYCO320 TYCO320 1516 -+adma MACH_ADMA ADMA 1517 -+wp188 MACH_WP188 WP188 1518 -+corsica MACH_CORSICA CORSICA 1519 -+bigeye MACH_BIGEYE BIGEYE 1520 -+machine_is_arm2410 MACH_MACHINE_IS_ARM2410 MACHINE_IS_ARM2410 1521 -+tll5000 MACH_TLL5000 TLL5000 1522 -+hni270 MACH_HNI_X270 HNI_X270 1523 -+qong MACH_QONG QONG 1524 -+tcompact MACH_TCOMPACT TCOMPACT 1525 -+puma5 MACH_PUMA5 PUMA5 1526 -+elara MACH_ELARA ELARA 1527 -+ellington MACH_ELLINGTON ELLINGTON 1528 -+xda_atom MACH_XDA_ATOM XDA_ATOM 1529 -+energizer2 MACH_ENERGIZER2 ENERGIZER2 1530 -+odin MACH_ODIN ODIN 1531 -+actux4 MACH_ACTUX4 ACTUX4 1532 -+esl_omap MACH_ESL_OMAP ESL_OMAP 1533 -+omap2evm MACH_OMAP2EVM OMAP2EVM 1534 -+omap3evm MACH_OMAP3EVM OMAP3EVM 1535 -+add_pcu57 MACH_ADD_PCU57 ADD_PCU57 1536 -+monaco MACH_MONACO MONACO 1537 -+levante MACH_LEVANTE LEVANTE 1538 -+tmxipx425 MACH_TMXIPX425 TMXIPX425 1539 -+leep MACH_LEEP LEEP 1540 -+raad MACH_RAAD RAAD 1541 -+dns323 MACH_DNS323 DNS323 1542 -+ap1000 MACH_AP1000 AP1000 1543 -+a9sam6432 MACH_A9SAM6432 A9SAM6432 1544 -+shiny MACH_SHINY SHINY 1545 -+omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 -+csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547 -+at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 -diff -urN -x CVS linux-2.6.24/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig ---- linux-2.6.24/drivers/char/Kconfig 2008-03-01 22:02:10.000000000 +0200 -+++ linux-2.6/drivers/char/Kconfig 2008-02-18 22:56:04.000000000 +0200 -@@ -1040,5 +1040,21 @@ - - source "drivers/s390/char/Kconfig" - -+config AT91_SPI -+ bool "SPI driver (legacy) for AT91RM9200 processors" -+ depends on ARCH_AT91RM9200 -+ default y -+ help -+ The SPI driver gives access to this serial bus on the AT91RM9200 -+ processor. -+ -+config AT91_SPIDEV -+ bool "SPI device interface (legacy) for AT91RM9200 processors" -+ depends on ARCH_AT91RM9200 && AT91_SPI -+ default n -+ help -+ The SPI driver gives user mode access to this serial -+ bus on the AT91RM9200 processor. -+ - endmenu - -diff -urN -x CVS linux-2.6.24/drivers/char/Makefile linux-2.6/drivers/char/Makefile ---- linux-2.6.24/drivers/char/Makefile 2008-03-01 22:02:10.000000000 +0200 -+++ linux-2.6/drivers/char/Makefile 2007-12-31 10:43:55.000000000 +0200 -@@ -96,6 +96,8 @@ - obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o - obj-$(CONFIG_GPIO_TB0219) += tb0219.o - obj-$(CONFIG_TELCLOCK) += tlclk.o -+obj-$(CONFIG_AT91_SPI) += at91_spi.o -+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o - - obj-$(CONFIG_MWAVE) += mwave/ - obj-$(CONFIG_AGP) += agp/ -diff -urN -x CVS linux-2.6.24/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c ---- linux-2.6.24/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/char/at91_spi.c 2007-12-31 15:18:43.000000000 +0200 -@@ -0,0 +1,336 @@ -+/* -+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder) -+ * -+ * Copyright (C) SAN People (Pty) Ltd -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#include <linux/init.h> -+#include <linux/dma-mapping.h> -+#include <linux/module.h> -+#include <linux/sched.h> -+#include <linux/completion.h> -+#include <linux/interrupt.h> -+#include <linux/clk.h> -+#include <linux/platform_device.h> -+#include <linux/atmel_pdc.h> -+#include <asm/io.h> -+#include <asm/semaphore.h> -+ -+#include <asm/arch/at91_spi.h> -+#include <asm/arch/board.h> -+#include <asm/arch/spi.h> -+ -+#undef DEBUG_SPI -+ -+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */ -+static int spi_enabled = 0; -+static struct semaphore spi_lock; /* protect access to SPI bus */ -+static int current_device = -1; /* currently selected SPI device */ -+static struct clk *spi_clk; /* SPI clock */ -+static void __iomem *spi_base; /* SPI peripheral base-address */ -+ -+DECLARE_COMPLETION(transfer_complete); -+ -+ -+#define at91_spi_read(reg) __raw_readl(spi_base + (reg)) -+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg)) -+ -+ -+/* ......................................................................... */ -+ -+/* -+ * Access and enable the SPI bus. -+ * This MUST be called before any transfers are performed. -+ */ -+void spi_access_bus(short device) -+{ -+ /* Ensure that requested device is valid */ -+ if ((device < 0) || (device >= NR_SPI_DEVICES)) -+ panic("at91_spi: spi_access_bus called with invalid device"); -+ -+ if (spi_enabled == 0) { -+ clk_enable(spi_clk); /* Enable Peripheral clock */ -+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */ -+#ifdef DEBUG_SPI -+ printk("SPI on\n"); -+#endif -+ } -+ spi_enabled++; -+ -+ /* Lock the SPI bus */ -+ down(&spi_lock); -+ current_device = device; -+ -+ /* Configure SPI bus for device */ -+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16)); -+} -+ -+/* -+ * Relinquish control of the SPI bus. -+ */ -+void spi_release_bus(short device) -+{ -+ if (device != current_device) -+ panic("at91_spi: spi_release called with invalid device"); -+ -+ /* Release the SPI bus */ -+ current_device = -1; -+ up(&spi_lock); -+ -+ spi_enabled--; -+ if (spi_enabled == 0) { -+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */ -+ clk_disable(spi_clk); /* Disable Peripheral clock */ -+#ifdef DEBUG_SPI -+ printk("SPI off\n"); -+#endif -+ } -+} -+ -+/* -+ * Perform a data transfer over the SPI bus -+ */ -+int spi_transfer(struct spi_transfer_list* list) -+{ -+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device]; -+ int tx_size; -+ -+ if (!list) -+ panic("at91_spi: spi_transfer called with NULL transfer list"); -+ if (current_device == -1) -+ panic("at91_spi: spi_transfer called without acquiring bus"); -+ -+#ifdef DEBUG_SPI -+ printk("SPI transfer start [%i]\n", list->nr_transfers); -+#endif -+ -+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */ -+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1; -+ -+ /* Store transfer list */ -+ device->xfers = list; -+ list->curr = 0; -+ -+ /* Assume there must be at least one transfer */ -+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE); -+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE); -+ -+ /* Program PDC registers */ -+ at91_spi_write(ATMEL_PDC_TPR, device->tx); -+ at91_spi_write(ATMEL_PDC_RPR, device->rx); -+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size); -+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size); -+ -+ /* Is there a second transfer? */ -+ if (list->nr_transfers > 1) { -+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE); -+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE); -+ -+ /* Program Next PDC registers */ -+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext); -+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext); -+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size); -+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size); -+ } -+ else { -+ device->txnext = 0; -+ device->rxnext = 0; -+ at91_spi_write(ATMEL_PDC_TNCR, 0); -+ at91_spi_write(ATMEL_PDC_RNCR, 0); -+ } -+ -+ // TODO: If we are doing consecutive transfers (at high speed, or -+ // small buffers), then it might be worth modifying the 'Delay between -+ // Consecutive Transfers' in the CSR registers. -+ // This is an issue if we cannot chain the next buffer fast enough -+ // in the interrupt handler. -+ -+ /* Enable transmitter and receiver */ -+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN); -+ -+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */ -+ wait_for_completion(&transfer_complete); -+ -+#ifdef DEBUG_SPI -+ printk("SPI transfer end\n"); -+#endif -+ -+ return 0; -+} -+ -+/* ......................................................................... */ -+ -+/* -+ * Handle interrupts from the SPI controller. -+ */ -+static irqreturn_t at91spi_interrupt(int irq, void *dev_id) -+{ -+ unsigned int status; -+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device]; -+ struct spi_transfer_list *list = device->xfers; -+ -+#ifdef DEBUG_SPI -+ printk("SPI interrupt %i\n", current_device); -+#endif -+ -+ if (!list) -+ panic("at91_spi: spi_interrupt with a NULL transfer list"); -+ -+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */ -+ -+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE); -+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE); -+ -+ device->tx = device->txnext; /* move next transfer to current transfer */ -+ device->rx = device->rxnext; -+ -+ list->curr = list->curr + 1; -+ if (list->curr == list->nr_transfers) { /* all transfers complete */ -+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */ -+ -+ /* Disable transmitter and receiver */ -+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); -+ -+ device->xfers = NULL; -+ complete(&transfer_complete); -+ } -+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */ -+ device->txnext = 0; -+ device->rxnext = 0; -+ at91_spi_write(ATMEL_PDC_TNCR, 0); -+ at91_spi_write(ATMEL_PDC_RNCR, 0); -+ } -+ else { -+ int i = (list->curr)+1; -+ -+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */ -+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1; -+ -+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE); -+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE); -+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext); -+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext); -+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size); -+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size); -+ } -+ return IRQ_HANDLED; -+} -+ -+/* ......................................................................... */ -+ -+/* -+ * Initialize the SPI controller -+ */ -+static int __init at91spi_probe(struct platform_device *pdev) -+{ -+ int i; -+ unsigned long scbr; -+ struct resource *res; -+ -+ init_MUTEX(&spi_lock); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) -+ return -ENXIO; -+ -+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi")) -+ return -EBUSY; -+ -+ spi_base = ioremap(res->start, res->end - res->start + 1); -+ if (!spi_base) { -+ release_mem_region(res->start, res->end - res->start + 1); -+ return -ENOMEM; -+ } -+ -+ spi_clk = clk_get(NULL, "spi_clk"); -+ if (IS_ERR(spi_clk)) { -+ printk(KERN_ERR "at91_spi: no clock defined\n"); -+ iounmap(spi_base); -+ release_mem_region(res->start, res->end - res->start + 1); -+ return -ENODEV; -+ } -+ -+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */ -+ -+ /* -+ * Calculate the correct SPI baud-rate divisor. -+ */ -+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK); -+ scbr = scbr + 1; /* round up */ -+ -+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr)); -+ -+ /* Set Chip Select registers to good defaults */ -+ for (i = 0; i < 4; i++) { -+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8)); -+ } -+ -+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); -+ -+ memset(&spi_dev, 0, sizeof(spi_dev)); -+ spi_dev[0].pcs = 0xE; -+ spi_dev[1].pcs = 0xD; -+ spi_dev[2].pcs = 0xB; -+ spi_dev[3].pcs = 0x7; -+ -+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) { -+ clk_put(spi_clk); -+ iounmap(spi_base); -+ release_mem_region(res->start, res->end - res->start + 1); -+ return -EBUSY; -+ } -+ -+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */ -+ -+ return 0; -+} -+ -+static int __devexit at91spi_remove(struct platform_device *pdev) -+{ -+ struct resource *res; -+ -+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */ -+ clk_put(spi_clk); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ iounmap(spi_base); -+ release_mem_region(res->start, res->end - res->start + 1); -+ -+ free_irq(AT91RM9200_ID_SPI, 0); -+ return 0; -+} -+ -+static struct platform_driver at91spi_driver = { -+ .probe = at91spi_probe, -+ .remove = __devexit_p(at91spi_remove), -+ .driver = { -+ .name = "at91_spi", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init at91spi_init(void) -+{ -+ return platform_driver_register(&at91spi_driver); -+} -+ -+static void __exit at91spi_exit(void) -+{ -+ platform_driver_unregister(&at91spi_driver); -+} -+ -+EXPORT_SYMBOL(spi_access_bus); -+EXPORT_SYMBOL(spi_release_bus); -+EXPORT_SYMBOL(spi_transfer); -+ -+module_init(at91spi_init); -+module_exit(at91spi_exit); -+ -+MODULE_LICENSE("GPL") -+MODULE_AUTHOR("Andrew Victor") -+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200") -diff -urN -x CVS linux-2.6.24/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c ---- linux-2.6.24/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200 -@@ -0,0 +1,233 @@ -+/* -+ * User-space interface to the SPI bus on Atmel AT91RM9200 -+ * -+ * Copyright (C) 2003 SAN People (Pty) Ltd -+ * -+ * Based on SPI driver by Rick Bronson -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/highmem.h> -+#include <linux/pagemap.h> -+#include <asm/arch/spi.h> -+ -+#ifdef CONFIG_DEVFS_FS -+#include <linux/devfs_fs_kernel.h> -+#endif -+ -+ -+#undef DEBUG_SPIDEV -+ -+/* ......................................................................... */ -+ -+/* -+ * Read or Write to SPI bus. -+ */ -+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset) -+{ -+ unsigned int spi_device = (unsigned int) file->private_data; -+ -+ struct mm_struct * mm; -+ struct page ** maplist; -+ struct spi_transfer_list* list; -+ int pgcount; -+ -+ unsigned int ofs, pagelen; -+ int res, i, err; -+ -+ if (!count) { -+ return 0; -+ } -+ -+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL); -+ if (!list) { -+ return -ENOMEM; -+ } -+ -+ mm = current->mm; -+ -+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE; -+ -+ if (pgcount >= MAX_SPI_TRANSFERS) { -+ kfree(list); -+ return -EFBIG; -+ } -+ -+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL); -+ -+ if (!maplist) { -+ kfree(list); -+ return -ENOMEM; -+ } -+ flush_cache_all(); -+ down_read(&mm->mmap_sem); -+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL); -+ up_read(&mm->mmap_sem); -+ -+ if (err < 0) { -+ kfree(list); -+ kfree(maplist); -+ return err; -+ } -+ pgcount = err; -+ -+#ifdef DEBUG_SPIDEV -+ printk("spidev_rd_rw: %i %i\n", count, pgcount); -+#endif -+ -+ /* Set default return value = transfer length */ -+ res = count; -+ -+ /* -+ * At this point, the virtual area buf[0] .. buf[count-1] will have -+ * corresponding pages mapped in the physical memory and locked until -+ * we unmap the kiobuf. The pages cannot be swapped out or moved -+ * around. -+ */ -+ ofs = (unsigned long) buf & (PAGE_SIZE -1); -+ pagelen = PAGE_SIZE - ofs; -+ if (count < pagelen) -+ pagelen = count; -+ -+ for (i = 0; i < pgcount; i++) { -+ flush_dcache_page(maplist[i]); -+ -+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs; -+ list->txlen[i] = list->rxlen[i] = pagelen; -+ -+#ifdef DEBUG_SPIDEV -+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]); -+#endif -+ -+ ofs = 0; /* all subsequent transfers start at beginning of a page */ -+ count = count - pagelen; -+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE; -+ } -+ list->nr_transfers = pgcount; -+ -+ /* Perform transfer on SPI bus */ -+ spi_access_bus(spi_device); -+ spi_transfer(list); -+ spi_release_bus(spi_device); -+ -+ while (pgcount--) { -+ page_cache_release (maplist[pgcount]); -+ } -+ flush_cache_all(); -+ -+ kfree(maplist); -+ kfree(list); -+ -+ return res; -+} -+ -+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int spi_device = MINOR(inode->i_rdev); -+ -+ if (spi_device >= NR_SPI_DEVICES) -+ return -ENODEV; -+ -+ // TODO: This interface can be used to configure the SPI bus. -+ // Configurable options could include: Speed, Clock Polarity, Clock Phase -+ -+ switch(cmd) { -+ default: -+ return -ENOIOCTLCMD; -+ } -+} -+ -+/* -+ * Open the SPI device -+ */ -+static int spidev_open(struct inode *inode, struct file *file) -+{ -+ unsigned int spi_device = MINOR(inode->i_rdev); -+ -+ if (spi_device >= NR_SPI_DEVICES) -+ return -ENODEV; -+ -+ /* -+ * 'private_data' is actually a pointer, but we overload it with the -+ * value we want to store. -+ */ -+ file->private_data = (void *)spi_device; -+ -+ return 0; -+} -+ -+/* -+ * Close the SPI device -+ */ -+static int spidev_close(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+/* ......................................................................... */ -+ -+static struct file_operations spidev_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .read = spidev_rd_wr, -+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr, -+ .ioctl = spidev_ioctl, -+ .open = spidev_open, -+ .release = spidev_close, -+}; -+ -+/* -+ * Install the SPI /dev interface driver -+ */ -+static int __init at91_spidev_init(void) -+{ -+#ifdef CONFIG_DEVFS_FS -+ int i; -+#endif -+ -+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) { -+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR); -+ return -EIO; -+ } -+ -+#ifdef CONFIG_DEVFS_FS -+ devfs_mk_dir("spi"); -+ for (i = 0; i < NR_SPI_DEVICES; i++) { -+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i); -+ } -+#endif -+ printk(KERN_INFO "AT91 SPI driver loaded\n"); -+ -+ return 0; -+} -+ -+/* -+ * Remove the SPI /dev interface driver -+ */ -+static void __exit at91_spidev_exit(void) -+{ -+#ifdef CONFIG_DEVFS_FS -+ int i; -+ for (i = 0; i < NR_SPI_DEVICES; i++) { -+ devfs_remove("spi/%d", i); -+ } -+ -+ devfs_remove("spi"); -+#endif -+ -+ unregister_chrdev(SPI_MAJOR, "spi"); -+} -+ -+module_init(at91_spidev_init); -+module_exit(at91_spidev_exit); -+ -+MODULE_LICENSE("GPL") -+MODULE_AUTHOR("Andrew Victor") -+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200") -diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig ---- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-03-01 22:02:10.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/Kconfig 2007-12-31 10:44:20.000000000 +0200 -@@ -88,6 +88,14 @@ - to support combined I2C messages. Use the i2c-gpio driver - unless your system can cope with those limitations. - -+config I2C_AT91_CLOCKRATE -+ prompt "Atmel AT91 I2C/TWI clock-rate" -+ depends on I2C_AT91 -+ int -+ default 100000 -+ help -+ Set the AT91 I2C/TWI clock-rate. -+ - config I2C_AU1550 - tristate "Au1550/Au1200 SMBus interface" - depends on SOC_AU1550 || SOC_AU1200 -@@ -629,6 +637,14 @@ - This driver can also be built as a module. If so, the module - will be called i2c-voodoo3. - -+config I2C_PCA -+ tristate "PCA9564" -+ depends on I2C -+ select I2C_ALGOPCA -+ help -+ This driver support the Philips PCA 9564 Parallel bus to I2C -+ bus controller. -+ - config I2C_PCA_ISA - tristate "PCA9564 on an ISA bus" - depends on ISA -diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile ---- linux-2.6.24/drivers/i2c/busses/Makefile 2008-03-01 22:02:10.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/Makefile 2007-12-31 10:44:20.000000000 +0200 -@@ -30,6 +30,7 @@ - obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o - obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o - obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o -+obj-$(CONFIG_I2C_PCA) += i2c-pca.o - obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o - obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o - obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o -diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c ---- linux-2.6.24/drivers/i2c/busses/i2c-at91.c 2008-03-01 22:02:10.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200 -@@ -31,8 +31,11 @@ - #include <asm/arch/board.h> - #include <asm/arch/cpu.h> - --#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ - -+/* Clockrate is configurable - max 400 Kbits/sec */ -+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE; -+module_param(clockrate, uint, 0); -+MODULE_PARM_DESC(clockrate, "The TWI clockrate"); - - static struct clk *twi_clk; - static void __iomem *twi_base; -@@ -53,7 +56,7 @@ - at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ - - /* Calcuate clock dividers */ -- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; -+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3; - cdiv = cdiv + 1; /* round up */ - ckdiv = 0; - while (cdiv > 255) { -@@ -61,11 +64,12 @@ - cdiv = cdiv >> 1; - } - -- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ -- if (ckdiv > 5) { -- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); -- ckdiv = 5; -- } -+ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */ -+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n"); -+ ckdiv = 5; -+ } else if (ckdiv > 7) { -+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n"); -+ ckdiv = 7; - } - - at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); -diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c ---- linux-2.6.24/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200 -@@ -0,0 +1,213 @@ -+/* -+ * Platform driver for PCA9564 I2C bus controller. -+ * -+ * (C) 2006 Andrew Victor -+ * -+ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards -+ * Copyright (C) 2004 Arcom Control Systems -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/delay.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/wait.h> -+#include <linux/platform_device.h> -+ -+#include <linux/i2c.h> -+#include <linux/i2c-algo-pca.h> -+ -+#include <asm/io.h> -+ -+#include "../algos/i2c-algo-pca.h" -+ -+#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */ -+#define PCA_CLOCK I2C_PCA_CON_59kHz -+ -+//#define REG_SHIFT 2 -+#define REG_SHIFT 0 -+ -+//#define DEBUG_IO -+ -+#define PCA_IO_SIZE 4 -+ -+static void __iomem *base_addr; -+static int irq; -+static wait_queue_head_t pca_wait; -+ -+static int pca_getown(struct i2c_algo_pca_data *adap) -+{ -+ return PCA_OWN_ADDRESS; -+} -+ -+static int pca_getclock(struct i2c_algo_pca_data *adap) -+{ -+ return PCA_CLOCK; -+} -+ -+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val) -+{ -+#ifdef DEBUG_IO -+ static char *names[] = { "T/O", "DAT", "ADR", "CON" }; -+ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val); -+#endif -+ udelay(1); -+ outb(val, base_addr + (reg << REG_SHIFT)); -+} -+ -+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg) -+{ -+ int res; -+ -+ udelay(1); -+ res = inb(base_addr + (reg << REG_SHIFT)); -+#ifdef DEBUG_IO -+ { -+ static char *names[] = { "STA", "DAT", "ADR", "CON" }; -+ printk("*** read %s => %#04x\n", names[reg], res); -+ } -+#endif -+ return res; -+} -+ -+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap) -+{ -+ int ret = 0; -+ -+ if (irq > -1) { -+ ret = wait_event_interruptible(pca_wait, -+ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI); -+ } else { -+ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) -+ udelay(100); -+ } -+ return ret; -+} -+ -+static irqreturn_t pca_handler(int this_irq, void *dev_id) -+{ -+ wake_up_interruptible(&pca_wait); -+ return IRQ_HANDLED; -+} -+ -+static struct i2c_algo_pca_data pca_i2c_data = { -+ .get_own = pca_getown, -+ .get_clock = pca_getclock, -+ .write_byte = pca_writebyte, -+ .read_byte = pca_readbyte, -+ .wait_for_interrupt = pca_waitforinterrupt, -+}; -+ -+static struct i2c_adapter pca_i2c_ops = { -+ .owner = THIS_MODULE, -+ .id = I2C_HW_A_PLAT, -+ .algo_data = &pca_i2c_data, -+ .name = "PCA9564", -+ .class = I2C_CLASS_HWMON, -+}; -+ -+static int __devinit pca_i2c_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ -+ init_waitqueue_head(&pca_wait); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) -+ return -ENODEV; -+ -+ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564")) -+ return -ENXIO; -+ -+ base_addr = ioremap(res->start, PCA_IO_SIZE); -+ if (base_addr == NULL) -+ goto out_region; -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq > -1) { -+ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) { -+ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq); -+ goto out_remap; -+ } -+ } -+ -+ /* set up the driverfs linkage to our parent device */ -+ pca_i2c_ops.dev.parent = &pdev->dev; -+ -+ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) { -+ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n"); -+ goto out_irq; -+ } -+ -+ return 0; -+ -+ out_irq: -+ if (irq > -1) -+ free_irq(irq, &pca_i2c_ops); -+ -+ out_remap: -+ iounmap(base_addr); -+ -+ out_region: -+ release_mem_region(res->start, PCA_IO_SIZE); -+ return -ENODEV; -+} -+ -+static int __devexit pca_i2c_remove(struct platform_device *pdev) -+{ -+ struct resource *res; -+ -+ i2c_del_adapter(&pca_i2c_ops); -+ -+ if (irq > 0) -+ free_irq(irq, NULL); -+ -+ iounmap(base_addr); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ release_mem_region(res->start, PCA_IO_SIZE); -+ -+ return 0; -+} -+ -+static struct platform_driver pca_i2c_driver = { -+ .probe = pca_i2c_probe, -+ .remove = __devexit_p(pca_i2c_remove), -+ .driver = { -+ .name = "pca9564", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init pca_i2c_init(void) -+{ -+ return platform_driver_register(&pca_i2c_driver); -+} -+ -+static void __exit pca_i2c_exit(void) -+{ -+ platform_driver_unregister(&pca_i2c_driver); -+} -+ -+module_init(pca_i2c_init); -+module_exit(pca_i2c_exit); -+ -+MODULE_AUTHOR("Andrew Victor"); -+MODULE_DESCRIPTION("PCA9564 platform driver"); -+MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.24/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c ---- linux-2.6.24/drivers/mmc/host/at91_mci.c 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-02-25 22:21:36.000000000 +0200 -@@ -70,10 +70,11 @@ - - #include <asm/io.h> - #include <asm/irq.h> -+#include <asm/gpio.h> -+ - #include <asm/mach/mmc.h> - #include <asm/arch/board.h> - #include <asm/arch/cpu.h> --#include <asm/arch/gpio.h> - #include <asm/arch/at91_mci.h> - - #define DRIVER_NAME "at91_mci" -@@ -658,13 +659,14 @@ - /* maybe switch power to the card */ - if (host->board->vcc_pin) { - switch (ios->power_mode) { -- case MMC_POWER_OFF: -- at91_set_gpio_value(host->board->vcc_pin, 0); -- break; -- case MMC_POWER_UP: -- case MMC_POWER_ON: -- at91_set_gpio_value(host->board->vcc_pin, 1); -- break; -+ case MMC_POWER_OFF: -+ gpio_set_value(host->board->vcc_pin, 0); -+ break; -+ case MMC_POWER_UP: -+ gpio_set_value(host->board->vcc_pin, 1); -+ break; -+ default: -+ break; - } - } - } -@@ -768,7 +770,7 @@ - static irqreturn_t at91_mmc_det_irq(int irq, void *_host) - { - struct at91mci_host *host = _host; -- int present = !at91_get_gpio_value(irq); -+ int present = !gpio_get_value(irq_to_gpio(irq)); - - /* - * we expect this irq on both insert and remove, -@@ -793,7 +795,7 @@ - struct at91mci_host *host = mmc_priv(mmc); - - if (host->board->wp_pin) { -- read_only = at91_get_gpio_value(host->board->wp_pin); -+ read_only = gpio_get_value(host->board->wp_pin); - printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc), - (read_only ? "read-only" : "read-write") ); - } -@@ -820,8 +822,6 @@ - struct resource *res; - int ret; - -- pr_debug("Probe MCI devices\n"); -- - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; -@@ -831,9 +831,9 @@ - - mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev); - if (!mmc) { -- pr_debug("Failed to allocate mmc host\n"); -- release_mem_region(res->start, res->end - res->start + 1); -- return -ENOMEM; -+ ret = -ENOMEM; -+ dev_dbg(&pdev->dev, "couldn't allocate mmc host\n"); -+ goto fail6; - } - - mmc->ops = &at91_mci_ops; -@@ -853,19 +853,44 @@ - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) - mmc->caps |= MMC_CAP_4_BIT_DATA; - else -- printk("AT91 MMC: 4 wire bus mode not supported" -+ dev_warn(&pdev->dev, "4 wire bus mode not supported" - " - using 1 wire\n"); - } - - /* -+ * Reserve GPIOs ... board init code makes sure these pins are set -+ * up as GPIOs with the right direction (input, except for vcc) -+ */ -+ if (host->board->det_pin) { -+ ret = gpio_request(host->board->det_pin, "mmc_detect"); -+ if (ret < 0) { -+ dev_dbg(&pdev->dev, "couldn't claim card detect pin\n"); -+ goto fail5; -+ } -+ } -+ if (host->board->wp_pin) { -+ ret = gpio_request(host->board->wp_pin, "mmc_wp"); -+ if (ret < 0) { -+ dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n"); -+ goto fail4; -+ } -+ } -+ if (host->board->vcc_pin) { -+ ret = gpio_request(host->board->vcc_pin, "mmc_vcc"); -+ if (ret < 0) { -+ dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n"); -+ goto fail3; -+ } -+ } -+ -+ /* - * Get Clock - */ - host->mci_clk = clk_get(&pdev->dev, "mci_clk"); - if (IS_ERR(host->mci_clk)) { -- printk(KERN_ERR "AT91 MMC: no clock defined.\n"); -- mmc_free_host(mmc); -- release_mem_region(res->start, res->end - res->start + 1); -- return -ENODEV; -+ ret = -ENODEV; -+ dev_dbg(&pdev->dev, "no mci_clk?\n"); -+ goto fail2; - } - - /* -@@ -873,10 +898,8 @@ - */ - host->baseaddr = ioremap(res->start, res->end - res->start + 1); - if (!host->baseaddr) { -- clk_put(host->mci_clk); -- mmc_free_host(mmc); -- release_mem_region(res->start, res->end - res->start + 1); -- return -ENOMEM; -+ ret = -ENOMEM; -+ goto fail1; - } - - /* -@@ -890,15 +913,11 @@ - * Allocate the MCI interrupt - */ - host->irq = platform_get_irq(pdev, 0); -- ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); -+ ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, -+ mmc_hostname(mmc), host); - if (ret) { -- printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n"); -- clk_disable(host->mci_clk); -- clk_put(host->mci_clk); -- mmc_free_host(mmc); -- iounmap(host->baseaddr); -- release_mem_region(res->start, res->end - res->start + 1); -- return ret; -+ dev_dbg(&pdev->dev, "request MCI interrupt failed\n"); -+ goto fail0; - } - - platform_set_drvdata(pdev, mmc); -@@ -907,8 +926,7 @@ - * Add host to MMC layer - */ - if (host->board->det_pin) { -- host->present = !at91_get_gpio_value(host->board->det_pin); -- device_init_wakeup(&pdev->dev, 1); -+ host->present = !gpio_get_value(host->board->det_pin); - } - else - host->present = -1; -@@ -919,15 +937,38 @@ - * monitor card insertion/removal if we can - */ - if (host->board->det_pin) { -- ret = request_irq(host->board->det_pin, at91_mmc_det_irq, -- 0, DRIVER_NAME, host); -+ ret = request_irq(gpio_to_irq(host->board->det_pin), -+ at91_mmc_det_irq, 0, mmc_hostname(mmc), host); - if (ret) -- printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n"); -+ dev_warn(&pdev->dev, "request MMC detect irq failed\n"); -+ else -+ device_init_wakeup(&pdev->dev, 1); - } - - pr_debug("Added MCI driver\n"); - - return 0; -+ -+fail0: -+ clk_disable(host->mci_clk); -+ iounmap(host->baseaddr); -+fail1: -+ clk_put(host->mci_clk); -+fail2: -+ if (host->board->vcc_pin) -+ gpio_free(host->board->vcc_pin); -+fail3: -+ if (host->board->wp_pin) -+ gpio_free(host->board->wp_pin); -+fail4: -+ if (host->board->det_pin) -+ gpio_free(host->board->det_pin); -+fail5: -+ mmc_free_host(mmc); -+fail6: -+ release_mem_region(res->start, res->end - res->start + 1); -+ dev_err(&pdev->dev, "probe failed, err %d\n", ret); -+ return ret; - } - - /* -@@ -945,9 +986,10 @@ - host = mmc_priv(mmc); - - if (host->board->det_pin) { -+ if (device_can_wakeup(&pdev->dev)) -+ free_irq(gpio_to_irq(host->board->det_pin), host); - device_init_wakeup(&pdev->dev, 0); -- free_irq(host->board->det_pin, host); -- cancel_delayed_work(&host->mmc->detect); -+ gpio_free(host->board->det_pin); - } - - at91_mci_disable(host); -@@ -957,6 +999,11 @@ - clk_disable(host->mci_clk); /* Disable the peripheral clock */ - clk_put(host->mci_clk); - -+ if (host->board->vcc_pin) -+ gpio_free(host->board->vcc_pin); -+ if (host->board->wp_pin) -+ gpio_free(host->board->wp_pin); -+ - iounmap(host->baseaddr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); -diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig ---- linux-2.6.24/drivers/mtd/devices/Kconfig 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200 -@@ -270,5 +270,17 @@ - LinuxBIOS or if you need to recover a DiskOnChip Millennium on which - you have managed to wipe the first block. - --endmenu -+config MTD_AT91_DATAFLASH -+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)" -+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI -+ help -+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200. -+ If you have such a board, say 'Y'. -+ -+config DATAFLASH_ALWAYS_ADD_DEVICE -+ bool "Register whole DataFlash device" -+ depends on MTD_AT91_DATAFLASH -+ help -+ Always add the whole DataFlash device when using MTD partitions. - -+endmenu -diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile ---- linux-2.6.24/drivers/mtd/devices/Makefile 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200 -@@ -17,3 +17,4 @@ - obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o - obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o - obj-$(CONFIG_MTD_M25P80) += m25p80.o -+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o -diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c ---- linux-2.6.24/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200 -@@ -0,0 +1,673 @@ -+/* -+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder) -+ * -+ * Copyright (C) SAN People (Pty) Ltd -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+*/ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/pci.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+ -+#include <asm/mach-types.h> -+ -+#include <asm/arch/spi.h> -+ -+ -+#undef DEBUG_DATAFLASH -+ -+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */ -+ -+#define OP_READ_CONTINUOUS 0xE8 -+#define OP_READ_PAGE 0xD2 -+#define OP_READ_BUFFER1 0xD4 -+#define OP_READ_BUFFER2 0xD6 -+#define OP_READ_STATUS 0xD7 -+ -+#define OP_ERASE_PAGE 0x81 -+#define OP_ERASE_BLOCK 0x50 -+ -+#define OP_TRANSFER_BUF1 0x53 -+#define OP_TRANSFER_BUF2 0x55 -+#define OP_COMPARE_BUF1 0x60 -+#define OP_COMPARE_BUF2 0x61 -+ -+#define OP_PROGRAM_VIA_BUF1 0x82 -+#define OP_PROGRAM_VIA_BUF2 0x85 -+ -+struct dataflash_local -+{ -+ int spi; /* SPI chip-select number */ -+ -+ unsigned int page_size; /* number of bytes per page */ -+ unsigned short page_offset; /* page offset in flash address */ -+}; -+ -+ -+/* Detected DataFlash devices */ -+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES]; -+static int nr_devices = 0; -+ -+/* ......................................................................... */ -+ -+#ifdef CONFIG_MTD_PARTITIONS -+ -+static struct mtd_partition static_partitions_2M[] = -+{ -+ { -+ .name = "bootloader", -+ .offset = 0, -+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */ -+ .mask_flags = MTD_WRITEABLE, /* read-only */ -+ }, -+ { -+ .name = "kernel", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 6 * 32 * 8 * 528, /* 6 sectors */ -+ }, -+ { -+ .name = "filesystem", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */ -+ } -+}; -+ -+static struct mtd_partition static_partitions_4M[] = -+{ -+ { -+ .name = "bootloader", -+ .offset = 0, -+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */ -+ .mask_flags = MTD_WRITEABLE, /* read-only */ -+ }, -+ { -+ .name = "kernel", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 4 * 64 * 8 * 528, /* 4 sectors */ -+ }, -+ { -+ .name = "filesystem", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */ -+ } -+}; -+ -+#if defined(CONFIG_MACH_KAFA) -+static struct mtd_partition static_partitions_8M[] = -+{ -+ { -+ name: "romboot", -+ offset: 0, -+ size: 16 * 1056, /* 160 Kb */ -+ mask_flags: MTD_WRITEABLE, /* read-only */ -+ }, -+ { -+ name: "uboot", -+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ -+ size: 128 * 1056, /* 1 MB */ -+ }, -+ { -+ name: "kernel", -+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ -+ size: 1024 * 1056, /* 1 MB */ -+ }, -+ { -+ name: "filesystem", -+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ -+ size: MTDPART_SIZ_FULL, -+ } -+}; -+ -+#elif defined(CONFIG_MACH_MULTMDP) -+ -+static struct mtd_partition static_partitions_8M[] = -+{ -+ { -+ .name = "bootloader", -+ .offset = 0, -+ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */ -+ .mask_flags = MTD_WRITEABLE, /* read-only */ -+ }, -+ { -+ .name = "configuration", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 20 * 1056, -+ }, -+ { -+ .name = "kernel", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 1520 * 1056, -+ }, -+ { -+ .name = "filesystem", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, -+ } -+}; -+ -+#else -+ -+static struct mtd_partition static_partitions_8M[] = -+{ -+ { -+ .name = "bootloader", -+ .offset = 0, -+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */ -+ .mask_flags = MTD_WRITEABLE, /* read-only */ -+ }, -+ { -+ .name = "kernel", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */ -+ }, -+ { -+ .name = "filesystem", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */ -+ } -+}; -+#endif -+ -+static const char *part_probes[] = { "cmdlinepart", NULL, }; -+ -+#endif -+ -+/* ......................................................................... */ -+ -+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple -+ SPI transfers occur at the same time, spi_access_bus() will serialize them. -+ If this is not valid, then either (i) each dataflash 'priv' structure -+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use -+ another mechanism. */ -+static struct spi_transfer_list* spi_transfer_desc; -+ -+/* -+ * Perform a SPI transfer to access the DataFlash device. -+ */ -+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len, -+ char* txnext, int txnext_len, char* rxnext, int rxnext_len) -+{ -+ struct spi_transfer_list* list = spi_transfer_desc; -+ -+ list->tx[0] = tx; list->txlen[0] = tx_len; -+ list->rx[0] = rx; list->rxlen[0] = rx_len; -+ -+ list->tx[1] = txnext; list->txlen[1] = txnext_len; -+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len; -+ -+ list->nr_transfers = nr; -+ -+ return spi_transfer(list); -+} -+ -+/* ......................................................................... */ -+ -+/* -+ * Poll the DataFlash device until it is READY. -+ */ -+static void at91_dataflash_waitready(void) -+{ -+ char* command = kmalloc(2, GFP_KERNEL); -+ -+ if (!command) -+ return; -+ -+ do { -+ command[0] = OP_READ_STATUS; -+ command[1] = 0; -+ -+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); -+ } while ((command[1] & 0x80) == 0); -+ -+ kfree(command); -+} -+ -+/* -+ * Return the status of the DataFlash device. -+ */ -+static unsigned short at91_dataflash_status(void) -+{ -+ unsigned short status; -+ char* command = kmalloc(2, GFP_KERNEL); -+ -+ if (!command) -+ return 0; -+ -+ command[0] = OP_READ_STATUS; -+ command[1] = 0; -+ -+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); -+ status = command[1]; -+ -+ kfree(command); -+ return status; -+} -+ -+/* ......................................................................... */ -+ -+/* -+ * Erase blocks of flash. -+ */ -+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) -+{ -+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; -+ unsigned int pageaddr; -+ char* command; -+ -+#ifdef DEBUG_DATAFLASH -+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len); -+#endif -+ -+ /* Sanity checks */ -+ if (instr->addr + instr->len > mtd->size) -+ return -EINVAL; -+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0)) -+ return -EINVAL; -+ if ((instr->addr % priv->page_size) != 0) -+ return -EINVAL; -+ -+ command = kmalloc(4, GFP_KERNEL); -+ if (!command) -+ return -ENOMEM; -+ -+ while (instr->len > 0) { -+ /* Calculate flash page address */ -+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset; -+ -+ command[0] = OP_ERASE_PAGE; -+ command[1] = (pageaddr & 0x00FF0000) >> 16; -+ command[2] = (pageaddr & 0x0000FF00) >> 8; -+ command[3] = 0; -+#ifdef DEBUG_DATAFLASH -+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr); -+#endif -+ -+ /* Send command to SPI device */ -+ spi_access_bus(priv->spi); -+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); -+ -+ at91_dataflash_waitready(); /* poll status until ready */ -+ spi_release_bus(priv->spi); -+ -+ instr->addr += priv->page_size; /* next page */ -+ instr->len -= priv->page_size; -+ } -+ -+ kfree(command); -+ -+ /* Inform MTD subsystem that erase is complete */ -+ instr->state = MTD_ERASE_DONE; -+ if (instr->callback) -+ instr->callback(instr); -+ -+ return 0; -+} -+ -+/* -+ * Read from the DataFlash device. -+ * from : Start offset in flash device -+ * len : Amount to read -+ * retlen : About of data actually read -+ * buf : Buffer containing the data -+ */ -+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) -+{ -+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; -+ unsigned int addr; -+ char* command; -+ -+#ifdef DEBUG_DATAFLASH -+ printk("dataflash_read: %lli .. %lli\n", from, from+len); -+#endif -+ -+ *retlen = 0; -+ -+ /* Sanity checks */ -+ if (!len) -+ return 0; -+ if (from + len > mtd->size) -+ return -EINVAL; -+ -+ /* Calculate flash page/byte address */ -+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size); -+ -+ command = kmalloc(8, GFP_KERNEL); -+ if (!command) -+ return -ENOMEM; -+ -+ command[0] = OP_READ_CONTINUOUS; -+ command[1] = (addr & 0x00FF0000) >> 16; -+ command[2] = (addr & 0x0000FF00) >> 8; -+ command[3] = (addr & 0x000000FF); -+#ifdef DEBUG_DATAFLASH -+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); -+#endif -+ -+ /* Send command to SPI device */ -+ spi_access_bus(priv->spi); -+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len); -+ spi_release_bus(priv->spi); -+ -+ *retlen = len; -+ kfree(command); -+ return 0; -+} -+ -+/* -+ * Write to the DataFlash device. -+ * to : Start offset in flash device -+ * len : Amount to write -+ * retlen : Amount of data actually written -+ * buf : Buffer containing the data -+ */ -+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) -+{ -+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; -+ unsigned int pageaddr, addr, offset, writelen; -+ size_t remaining; -+ u_char *writebuf; -+ unsigned short status; -+ int res = 0; -+ char* command; -+ char* tmpbuf = NULL; -+ -+#ifdef DEBUG_DATAFLASH -+ printk("dataflash_write: %lli .. %lli\n", to, to+len); -+#endif -+ -+ *retlen = 0; -+ -+ /* Sanity checks */ -+ if (!len) -+ return 0; -+ if (to + len > mtd->size) -+ return -EINVAL; -+ -+ command = kmalloc(4, GFP_KERNEL); -+ if (!command) -+ return -ENOMEM; -+ -+ pageaddr = ((unsigned)to / priv->page_size); -+ offset = ((unsigned)to % priv->page_size); -+ if (offset + len > priv->page_size) -+ writelen = priv->page_size - offset; -+ else -+ writelen = len; -+ writebuf = (u_char *)buf; -+ remaining = len; -+ -+ /* Allocate temporary buffer */ -+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL); -+ if (!tmpbuf) { -+ kfree(command); -+ return -ENOMEM; -+ } -+ -+ /* Gain access to the SPI bus */ -+ spi_access_bus(priv->spi); -+ -+ while (remaining > 0) { -+#ifdef DEBUG_DATAFLASH -+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen); -+#endif -+ -+ /* (1) Transfer to Buffer1 */ -+ if (writelen != priv->page_size) { -+ addr = pageaddr << priv->page_offset; -+ command[0] = OP_TRANSFER_BUF1; -+ command[1] = (addr & 0x00FF0000) >> 16; -+ command[2] = (addr & 0x0000FF00) >> 8; -+ command[3] = 0; -+#ifdef DEBUG_DATAFLASH -+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); -+#endif -+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); -+ at91_dataflash_waitready(); -+ } -+ -+ /* (2) Program via Buffer1 */ -+ addr = (pageaddr << priv->page_offset) + offset; -+ command[0] = OP_PROGRAM_VIA_BUF1; -+ command[1] = (addr & 0x00FF0000) >> 16; -+ command[2] = (addr & 0x0000FF00) >> 8; -+ command[3] = (addr & 0x000000FF); -+#ifdef DEBUG_DATAFLASH -+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); -+#endif -+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen); -+ at91_dataflash_waitready(); -+ -+ /* (3) Compare to Buffer1 */ -+ addr = pageaddr << priv->page_offset; -+ command[0] = OP_COMPARE_BUF1; -+ command[1] = (addr & 0x00FF0000) >> 16; -+ command[2] = (addr & 0x0000FF00) >> 8; -+ command[3] = 0; -+#ifdef DEBUG_DATAFLASH -+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); -+#endif -+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); -+ at91_dataflash_waitready(); -+ -+ /* Get result of the compare operation */ -+ status = at91_dataflash_status(); -+ if (status & 0x40) { -+ printk("at91_dataflash: Write error on page %i\n", pageaddr); -+ remaining = 0; -+ writelen = 0; -+ res = -EIO; -+ } -+ -+ remaining = remaining - writelen; -+ pageaddr++; -+ offset = 0; -+ writebuf += writelen; -+ *retlen += writelen; -+ -+ if (remaining > priv->page_size) -+ writelen = priv->page_size; -+ else -+ writelen = remaining; -+ } -+ -+ /* Release SPI bus */ -+ spi_release_bus(priv->spi); -+ -+ kfree(tmpbuf); -+ kfree(command); -+ return res; -+} -+ -+/* ......................................................................... */ -+ -+/* -+ * Initialize and register DataFlash device with MTD subsystem. -+ */ -+static int __init add_dataflash(int channel, char *name, int IDsize, -+ int nr_pages, int pagesize, int pageoffset) -+{ -+ struct mtd_info *device; -+ struct dataflash_local *priv; -+#ifdef CONFIG_MTD_PARTITIONS -+ struct mtd_partition *mtd_parts = 0; -+ int mtd_parts_nr = 0; -+#endif -+ -+ if (nr_devices >= DATAFLASH_MAX_DEVICES) { -+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n"); -+ return 0; -+ } -+ -+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL); -+ if (!device) -+ return -ENOMEM; -+ memset(device, 0, sizeof(struct mtd_info)); -+ -+ device->name = (char *)&device[1]; -+ sprintf(device->name, "%s.spi%d", name, channel); -+ device->size = nr_pages * pagesize; -+ device->erasesize = pagesize; -+ device->writesize = pagesize; -+ device->owner = THIS_MODULE; -+ device->type = MTD_DATAFLASH; -+ device->flags = MTD_WRITEABLE; -+ device->erase = at91_dataflash_erase; -+ device->read = at91_dataflash_read; -+ device->write = at91_dataflash_write; -+ -+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL); -+ if (!priv) { -+ kfree(device); -+ return -ENOMEM; -+ } -+ memset(priv, 0, sizeof(struct dataflash_local)); -+ -+ priv->spi = channel; -+ priv->page_size = pagesize; -+ priv->page_offset = pageoffset; -+ device->priv = priv; -+ -+ mtd_devices[nr_devices] = device; -+ nr_devices++; -+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size); -+ -+#ifdef CONFIG_MTD_PARTITIONS -+#ifdef CONFIG_MTD_CMDLINE_PARTS -+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0); -+#endif -+ if (mtd_parts_nr <= 0) { -+ switch (IDsize) { -+ case SZ_2M: -+ mtd_parts = static_partitions_2M; -+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M); -+ break; -+ case SZ_4M: -+ mtd_parts = static_partitions_4M; -+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M); -+ break; -+ case SZ_8M: -+ mtd_parts = static_partitions_8M; -+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M); -+ break; -+ } -+ } -+ -+ if (mtd_parts_nr > 0) { -+#ifdef CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE -+ add_mtd_device(device); -+#endif -+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr); -+ } -+#endif -+ return add_mtd_device(device); /* add whole device */ -+} -+ -+/* -+ * Detect and initialize DataFlash device connected to specified SPI channel. -+ * -+ * Device Density ID code Nr Pages Page Size Page offset -+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 -+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 -+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 -+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 -+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 -+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 -+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11 -+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 -+ */ -+static int __init at91_dataflash_detect(int channel) -+{ -+ int res = 0; -+ unsigned short status; -+ -+ spi_access_bus(channel); -+ status = at91_dataflash_status(); -+ spi_release_bus(channel); -+ if (status != 0xff) { /* no dataflash device there */ -+ switch (status & 0x3c) { -+ case 0x0c: /* 0 0 1 1 */ -+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9); -+ break; -+ case 0x14: /* 0 1 0 1 */ -+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9); -+ break; -+ case 0x1c: /* 0 1 1 1 */ -+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9); -+ break; -+ case 0x24: /* 1 0 0 1 */ -+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9); -+ break; -+ case 0x2c: /* 1 0 1 1 */ -+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10); -+ break; -+ case 0x34: /* 1 1 0 1 */ -+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10); -+ break; -+ case 0x3c: /* 1 1 1 1 */ -+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11); -+ break; -+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands. -+// case 0x10: /* 0 1 0 0 */ -+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11); -+// break; -+ default: -+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c); -+ } -+ } -+ -+ return res; -+} -+ -+static int __init at91_dataflash_init(void) -+{ -+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL); -+ if (!spi_transfer_desc) -+ return -ENOMEM; -+ -+ /* DataFlash (SPI chip select 0) */ -+ at91_dataflash_detect(0); -+ -+ if (machine_is_sweda_tms()) -+ at91_dataflash_detect(1); /* DataFlash device (SPI chip select 1) */ -+ -+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -+ /* DataFlash card (SPI chip select 3) */ -+ at91_dataflash_detect(3); -+#endif -+ -+ return 0; -+} -+ -+static void __exit at91_dataflash_exit(void) -+{ -+ int i; -+ -+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) { -+ if (mtd_devices[i]) { -+#ifdef CONFIG_MTD_PARTITIONS -+ del_mtd_partitions(mtd_devices[i]); -+#else -+ del_mtd_device(mtd_devices[i]); -+#endif -+ kfree(mtd_devices[i]->priv); -+ kfree(mtd_devices[i]); -+ } -+ } -+ nr_devices = 0; -+ kfree(spi_transfer_desc); -+} -+ -+ -+module_init(at91_dataflash_init); -+module_exit(at91_dataflash_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andrew Victor"); -+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200"); -diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c linux-2.6/drivers/mtd/devices/mtd_dataflash.c ---- linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/mtd_dataflash.c 2007-12-31 10:44:31.000000000 +0200 -@@ -420,7 +420,7 @@ - status = dataflash_waitready(priv->spi); - - /* Check result of the compare operation */ -- if ((status & (1 << 6)) == 1) { -+ if (status & (1 << 6)) { - printk(KERN_ERR "%s: compare page %u, err %d\n", - spi->dev.bus_id, pageaddr, status); - remaining = 0; -diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig ---- linux-2.6.24/drivers/mtd/nand/Kconfig 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/mtd/nand/Kconfig 2008-03-04 21:14:54.000000000 +0200 -@@ -279,6 +279,47 @@ - Enables support for NAND Flash / Smart Media Card interface - on Atmel AT91 processors. - -+choice -+ prompt "ECC management for NAND Flash / SmartMedia on AT91" -+ depends on MTD_NAND_AT91 -+ -+config MTD_NAND_AT91_ECC_SOFT -+ bool "Software ECC" -+ depends on MTD_NAND_AT91 -+ help -+ Uses software ECC. -+ -+ NB : hardware and software ECC schemes are incompatible. -+ If you switch from one to another, you'll have to erase your -+ mtd partition. -+ -+config MTD_NAND_AT91_ECC_HW -+ bool "Hardware ECC" -+ depends on MTD_NAND_AT91 && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9) -+ help -+ Uses hardware ECC provided by the AT91 processor -+ instead of software ECC. -+ The hardware ECC controller is capable of single bit error -+ correction and 2-bit random detection per page. -+ -+ NB : hardware and software ECC schemes are incompatible. -+ If you switch from one to another, you'll have to erase your -+ mtd partition. -+ -+ If unsure, say Y -+ -+config MTD_NAND_AT91_ECC_NONE -+ bool "No ECC (Testing Only)" -+ depends on MTD_NAND_AT91 -+ help -+ No ECC will be used. -+ It's not a good idea and it should be reserved for testing -+ purpose only. -+ -+ If unsure, say N -+ -+endchoice -+ - config MTD_NAND_CM_X270 - tristate "Support for NAND Flash on CM-X270 modules" - depends on MTD_NAND && MACH_ARMCORE -diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c ---- linux-2.6.24/drivers/mtd/nand/at91_nand.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-03-04 21:41:16.000000000 +0200 -@@ -9,6 +9,15 @@ - * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com) - * -+ * -+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263 -+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007 -+ * -+ * Derived from Das U-Boot source code -+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c) -+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas -+ * -+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -@@ -28,12 +37,54 @@ - #include <asm/hardware.h> - #include <asm/arch/board.h> - #include <asm/arch/gpio.h> -+#include <asm/arch/at91_ecc.h> -+ -+#ifdef CONFIG_MTD_NAND_AT91_ECC_HW -+#define hard_ecc 1 -+#else -+#define hard_ecc 0 -+#endif -+ -+#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE -+#define no_ecc 1 -+#else -+#define no_ecc 0 -+#endif -+ -+/* Register access macros */ -+#define ecc_readl(base, reg) __raw_readl(base + reg) -+#define ecc_writel(base, reg, value) __raw_writel((value), base + reg) -+ -+ -+/* -+ * OOB layout for large page size. -+ * bad block info is on bytes 0 and 1 -+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read. -+ */ -+static struct nand_ecclayout at91_oobinfo_large = { -+ .eccbytes = 4, -+ .eccpos = {60, 61, 62, 63}, -+ .oobfree = { {2, 58} }, -+}; -+ -+/* -+ * OOB layout for small page size -+ * bad block info is on bytes 4 and 5 -+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read. -+ */ -+static struct nand_ecclayout at91_oobinfo_small = { -+ .eccbytes = 4, -+ .eccpos = {0, 1, 2, 3}, -+ .oobfree = { {6, 10} }, -+}; - - struct at91_nand_host { - struct nand_chip nand_chip; - struct mtd_info mtd; - void __iomem *io_base; - struct at91_nand_data *board; -+ struct device *dev; -+ void __iomem *ecc; - }; - - /* -@@ -82,10 +133,250 @@ - at91_set_gpio_value(host->board->enable_pin, 1); - } - -+/* -+ * write oob for small pages -+ */ -+static int at91_nand_write_oob_512(struct mtd_info *mtd, -+ struct nand_chip *chip, int page) -+{ -+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; -+ int eccsize = chip->ecc.size, length = mtd->oobsize; -+ int len, pos, status = 0; -+ const uint8_t *bufpoi = chip->oob_poi; -+ -+ pos = eccsize + chunk; -+ -+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); -+ len = min_t(int, length, chunk); -+ chip->write_buf(mtd, bufpoi, len); -+ bufpoi += len; -+ length -= len; -+ if (length > 0) -+ chip->write_buf(mtd, bufpoi, length); -+ -+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); -+ status = chip->waitfunc(mtd, chip); -+ -+ return status & NAND_STATUS_FAIL ? -EIO : 0; -+ -+} -+ -+/* -+ * read oob for small pages -+ */ -+static int at91_nand_read_oob_512(struct mtd_info *mtd, -+ struct nand_chip *chip, int page, int sndcmd) -+{ -+ if (sndcmd) { -+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -+ sndcmd = 0; -+ } -+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ return sndcmd; -+} -+ -+/* -+ * Calculate HW ECC -+ * -+ * mtd: MTD block structure -+ * dat: raw data (unused) -+ * ecc_code: buffer for ECC -+ */ -+static int at91_nand_calculate(struct mtd_info *mtd, -+ const u_char *dat, unsigned char *ecc_code) -+{ -+ struct nand_chip *nand_chip = mtd->priv; -+ struct at91_nand_host *host = nand_chip->priv; -+ uint32_t *eccpos = nand_chip->ecc.layout->eccpos; -+ unsigned int ecc_value; -+ -+ /* get the first 2 ECC bytes */ -+ ecc_value = ecc_readl(host->ecc, AT91_ECC_PR) & (AT91_ECC_BITADDR | AT91_ECC_WORDADDR); -+ -+ ecc_code[eccpos[0]] = ecc_value & 0xFF; -+ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF; -+ -+ /* get the last 2 ECC bytes */ -+ ecc_value = ecc_readl(host->ecc, AT91_ECC_NPR) & AT91_ECC_NPARITY; -+ -+ ecc_code[eccpos[2]] = ecc_value & 0xFF; -+ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF; -+ -+ return 0; -+} -+ -+/* -+ * HW ECC read page function -+ * -+ * mtd: mtd info structure -+ * chip: nand chip info structure -+ * buf: buffer to store read data -+ */ -+static int at91_nand_read_page(struct mtd_info *mtd, -+ struct nand_chip *chip, uint8_t *buf) -+{ -+ int eccsize = chip->ecc.size; -+ int eccbytes = chip->ecc.bytes; -+ uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint8_t *p = buf; -+ uint8_t *oob = chip->oob_poi; -+ uint8_t *ecc_pos; -+ int stat; -+ -+ /* read the page */ -+ chip->read_buf(mtd, p, eccsize); -+ -+ /* move to ECC position if needed */ -+ if (eccpos[0] != 0) { -+ /* -+ * This only works on large pages because the ECC controller -+ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT. -+ * Anyway, for small pages, the eccpos[0] == 0 -+ */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, -+ mtd->writesize + eccpos[0], -1); -+ } -+ -+ /* the ECC controller needs to read the ECC just after the data */ -+ ecc_pos = oob + eccpos[0]; -+ chip->read_buf(mtd, ecc_pos, eccbytes); -+ -+ /* check if there's an error */ -+ stat = chip->ecc.correct(mtd, p, oob, NULL); -+ -+ if (stat < 0) -+ mtd->ecc_stats.failed++; -+ else -+ mtd->ecc_stats.corrected += stat; -+ -+ /* get back to oob start (end of page) */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); -+ -+ /* read the oob */ -+ chip->read_buf(mtd, oob, mtd->oobsize); -+ -+ return 0; -+} -+ -+/* -+ * HW ECC Correction -+ * -+ * mtd: MTD block structure -+ * dat: raw data read from the chip -+ * read_ecc: ECC from the chip (unused) -+ * isnull: unused -+ * -+ * Detect and correct a 1 bit error for a page -+ */ -+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat, -+ u_char *read_ecc, u_char *isnull) -+{ -+ struct nand_chip *nand_chip = mtd->priv; -+ struct at91_nand_host *host = nand_chip->priv; -+ unsigned int ecc_status; -+ unsigned int ecc_word, ecc_bit; -+ -+ /* get the status from the Status Register */ -+ ecc_status = ecc_readl(host->ecc, AT91_ECC_SR); -+ -+ /* if there's no error */ -+ if (likely(!(ecc_status & AT91_ECC_RECERR))) -+ return 0; -+ -+ /* get error bit offset (4 bits) */ -+ ecc_bit = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_BITADDR; -+ /* get word address (12 bits) */ -+ ecc_word = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_WORDADDR; -+ ecc_word >>= 4; -+ -+ /* if there are multiple errors */ -+ if (ecc_status & AT91_ECC_MULERR) { -+ /* Check if it is a freshly erased block (filled with 0xff) */ -+ if ((ecc_bit == AT91_ECC_BITADDR) -+ && (ecc_word == (AT91_ECC_WORDADDR >> 4))) { -+ /* the block has just been erased, return OK */ -+ return 0; -+ } -+ /* -+ * It doesn't seems to be a freshly-erased block. -+ * We can't correct so many errors. -+ */ -+ dev_dbg(host->dev, "at91_nand : multiple errors detected." -+ " Unable to correct.\n"); -+ return -EIO; -+ } -+ -+ /* if there's a single bit error : we can correct it */ -+ if (ecc_status & AT91_ECC_ECCERR) { -+ /* -+ * There's nothing much to do here. -+ * The bit error is on the ECC itself. -+ */ -+ dev_dbg(host->dev, "at91_nand : one bit error on ECC code." -+ " Nothing to correct\n"); -+ return 0; -+ } -+ -+ dev_dbg(host->dev, "at91_nand : one bit error on data." -+ " (word offset in the page :" -+ " 0x%x bit offset : 0x%x)\n", -+ ecc_word, ecc_bit); -+ /* correct the error */ -+ if (nand_chip->options & NAND_BUSWIDTH_16) { -+ /* 16 bits words */ -+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit); -+ } else { -+ /* 8 bits words */ -+ dat[ecc_word] ^= (1 << ecc_bit); -+ } -+ dev_dbg(host->dev, "at91_nand : error corrected\n"); -+ return 1; -+} -+ -+/* -+ * Enable HW ECC : unsused -+ */ -+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; } -+ -+/* -+ * Over-ride the standard functions with our optimized versions. -+ * We can use read/write blocks to move data to/from the controller. -+ */ -+static void at91_read_buf8(struct mtd_info *mtd, u8 *buf, int len) -+{ -+ struct nand_chip *nand_chip = mtd->priv; -+ -+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len); -+} -+ -+static void at91_read_buf16(struct mtd_info *mtd, u8 *buf, int len) -+{ -+ struct nand_chip *nand_chip = mtd->priv; -+ -+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2); -+} -+ -+static void at91_write_buf8(struct mtd_info *mtd, const u8 *buf, int len) -+{ -+ struct nand_chip *nand_chip = mtd->priv; -+ -+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len); -+} -+ -+static void at91_write_buf16(struct mtd_info *mtd, const u8 *buf, int len) -+{ -+ struct nand_chip *nand_chip = mtd->priv; -+ -+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2); -+} -+ -+ - #ifdef CONFIG_MTD_PARTITIONS --const char *part_probes[] = { "cmdlinepart", NULL }; -+static const char *part_probes[] = { "cmdlinepart", NULL }; - #endif - -+static char* ecc_modes[] __initdata = { "No", "Software", "Hardware" }; -+ - /* - * Probe for the NAND device. - */ -@@ -94,6 +385,8 @@ - struct at91_nand_host *host; - struct mtd_info *mtd; - struct nand_chip *nand_chip; -+ struct resource *regs; -+ struct resource *mem; - int res; - - #ifdef CONFIG_MTD_PARTITIONS -@@ -108,8 +401,13 @@ - return -ENOMEM; - } - -- host->io_base = ioremap(pdev->resource[0].start, -- pdev->resource[0].end - pdev->resource[0].start + 1); -+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!mem) { -+ printk(KERN_ERR "at91_nand: can't get I/O resource mem\n"); -+ return -ENXIO; -+ } -+ -+ host->io_base = ioremap(mem->start, mem->end - mem->start + 1); - if (host->io_base == NULL) { - printk(KERN_ERR "at91_nand: ioremap failed\n"); - kfree(host); -@@ -119,6 +417,7 @@ - mtd = &host->mtd; - nand_chip = &host->nand_chip; - host->board = pdev->dev.platform_data; -+ host->dev = &pdev->dev; - - nand_chip->priv = host; /* link the private data structures */ - mtd->priv = nand_chip; -@@ -132,11 +431,40 @@ - if (host->board->rdy_pin) - nand_chip->dev_ready = at91_nand_device_ready; - -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!regs && hard_ecc) { -+ printk(KERN_ERR "at91_nand: can't get I/O resource " -+ "regs\nFalling back on software ECC\n"); -+ } -+ - nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ -+ if (no_ecc) -+ nand_chip->ecc.mode = NAND_ECC_NONE; -+ if (hard_ecc && regs) { -+ host->ecc = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS); -+ host->ecc += regs->start; -+ -+ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* HW SYNDROME ECC */ -+ nand_chip->ecc.calculate = at91_nand_calculate; /* function called after a write */ -+ nand_chip->ecc.correct = at91_nand_correct; /* function called after a read */ -+ nand_chip->ecc.hwctl = at91_nand_hwctl; /* unused */ -+ nand_chip->ecc.read_page = at91_nand_read_page; /* read page function */ -+ nand_chip->ecc.bytes = 4; /* 4 ECC bytes for any page size */ -+ nand_chip->ecc.prepad = 0; -+ nand_chip->ecc.postpad = 0; -+ } -+ - nand_chip->chip_delay = 20; /* 20us command delay time */ - -- if (host->board->bus_width_16) /* 16-bit bus width */ -+ if (host->board->bus_width_16) { /* 16-bit bus width */ - nand_chip->options |= NAND_BUSWIDTH_16; -+ nand_chip->read_buf = at91_read_buf16; -+ nand_chip->write_buf = at91_write_buf16; -+ } -+ else { -+ nand_chip->read_buf = at91_read_buf8; -+ nand_chip->write_buf = at91_write_buf8; -+ } - - platform_set_drvdata(pdev, host); - at91_nand_enable(host); -@@ -149,21 +477,73 @@ - } - } - -- /* Scan to find existance of the device */ -- if (nand_scan(mtd, 1)) { -+ /* first scan to find the device and get the page size */ -+ if (nand_scan_ident(mtd, 1)) { -+ res = -ENXIO; -+ goto out; -+ } -+ -+ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) { -+ /* ECC is calculated for the whole page (1 step) */ -+ nand_chip->ecc.size = mtd->writesize; -+ -+ /* set ECC page size and oob layout */ -+ switch (mtd->writesize) { -+ case 512: -+ nand_chip->ecc.layout = &at91_oobinfo_small; -+ nand_chip->ecc.read_oob = at91_nand_read_oob_512; -+ nand_chip->ecc.write_oob = at91_nand_write_oob_512; -+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_528); -+ break; -+ case 1024: -+ nand_chip->ecc.layout = &at91_oobinfo_large; -+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_1056); -+ break; -+ case 2048: -+ nand_chip->ecc.layout = &at91_oobinfo_large; -+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_2112); -+ break; -+ case 4096: -+ nand_chip->ecc.layout = &at91_oobinfo_large; -+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_4224); -+ break; -+ default: -+ /* -+ * Page size not supported by HW ECC. -+ * So switch back to soft ECC -+ */ -+ nand_chip->ecc.mode = NAND_ECC_SOFT; -+ nand_chip->ecc.calculate = NULL; -+ nand_chip->ecc.correct = NULL; -+ nand_chip->ecc.hwctl = NULL; -+ nand_chip->ecc.read_page = NULL; -+ nand_chip->ecc.postpad = 0; -+ nand_chip->ecc.prepad = 0; -+ nand_chip->ecc.bytes = 0; -+ break; -+ } -+ } -+ -+ printk(KERN_INFO "AT91 NAND: %i-bit, %s ECC\n", -+ (nand_chip->options & NAND_BUSWIDTH_16) ? 16 : 8, -+ ecc_modes[nand_chip->ecc.mode] -+ ); -+ -+ /* second phase scan */ -+ if (nand_scan_tail(mtd)) { - res = -ENXIO; - goto out; - } - - #ifdef CONFIG_MTD_PARTITIONS -- if (host->board->partition_info) -- partitions = host->board->partition_info(mtd->size, &num_partitions); - #ifdef CONFIG_MTD_CMDLINE_PARTS -- else { -- mtd->name = "at91_nand"; -- num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0); -- } -+ mtd->name = "at91_nand"; -+ num_partitions = parse_mtd_partitions(mtd, part_probes, -+ &partitions, 0); - #endif -+ if (num_partitions <= 0 && host->board->partition_info) -+ partitions = host->board->partition_info(mtd->size, -+ &num_partitions); - - if ((!partitions) || (num_partitions == 0)) { - printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n"); -@@ -179,8 +559,11 @@ - if (!res) - return res; - -+#ifdef CONFIG_MTD_PARTITIONS - release: -+#endif - nand_release(mtd); -+ - out: - at91_nand_disable(host); - platform_set_drvdata(pdev, NULL); -@@ -192,7 +575,7 @@ - /* - * Remove a NAND device. - */ --static int __devexit at91_nand_remove(struct platform_device *pdev) -+static int __exit at91_nand_remove(struct platform_device *pdev) - { - struct at91_nand_host *host = platform_get_drvdata(pdev); - struct mtd_info *mtd = &host->mtd; -@@ -208,8 +591,7 @@ - } - - static struct platform_driver at91_nand_driver = { -- .probe = at91_nand_probe, -- .remove = at91_nand_remove, -+ .remove = __exit_p(at91_nand_remove), - .driver = { - .name = "at91_nand", - .owner = THIS_MODULE, -@@ -218,7 +600,7 @@ - - static int __init at91_nand_init(void) - { -- return platform_driver_register(&at91_nand_driver); -+ return platform_driver_probe(&at91_nand_driver, at91_nand_probe); - } - - -@@ -233,4 +615,4 @@ - - MODULE_LICENSE("GPL"); - MODULE_AUTHOR("Rick Bronson"); --MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200"); -+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9"); -diff -urN -x CVS linux-2.6.24/drivers/net/Kconfig linux-2.6/drivers/net/Kconfig ---- linux-2.6.24/drivers/net/Kconfig 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/net/Kconfig 2008-02-18 22:56:04.000000000 +0200 -@@ -212,7 +212,7 @@ - - config MACB - tristate "Atmel MACB support" -- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 -+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9 - select PHYLIB - help - The Atmel MACB ethernet interface is found on many AT32 and AT91 -diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c ---- linux-2.6.24/drivers/net/arm/at91_ether.c 2008-03-01 22:02:12.000000000 +0200 -+++ linux-2.6/drivers/net/arm/at91_ether.c 2008-03-04 22:17:26.000000000 +0200 -@@ -220,7 +220,7 @@ - if (!(phy & (1 << 0))) - goto done; - } -- else if (lp->phy_type == MII_KS8721_ID) { -+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { - read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */ - if (!(phy & ((1 << 2) | 1))) - goto done; -@@ -286,7 +286,7 @@ - dsintr = (1 << 15) | ( 1 << 14); - write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); - } -- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */ -+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */ - dsintr = (1 << 10) | ( 1 << 8); - write_phy(lp->phy_address, MII_TPISTATUS, dsintr); - } -@@ -341,7 +341,7 @@ - dsintr = ~(1 << 14); - write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); - } -- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */ -+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */ - read_phy(lp->phy_address, MII_TPISTATUS, &dsintr); - dsintr = ~((1 << 10) | (1 << 8)); - write_phy(lp->phy_address, MII_TPISTATUS, dsintr); -@@ -384,7 +384,7 @@ - /* Wait until PHY reset is complete */ - do { - read_phy(lp->phy_address, MII_BMCR, &bmcr); -- } while (!(bmcr && BMCR_RESET)); -+ } while (!(bmcr & BMCR_RESET)); - - disable_mdi(); - spin_unlock_irq(&lp->lock); -@@ -978,15 +978,22 @@ - struct net_device *dev; - struct at91_private *lp; - unsigned int val; -- int res; -+ struct resource *res; -+ int ret; - DECLARE_MAC_BUF(mac); - - dev = alloc_etherdev(sizeof(struct at91_private)); - if (!dev) - return -ENOMEM; - -- dev->base_addr = AT91_VA_BASE_EMAC; -- dev->irq = AT91RM9200_ID_EMAC; -+ /* Get I/O base address and IRQ */ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ free_netdev(dev); -+ return -ENODEV; -+ } -+ dev->base_addr = res->start; -+ dev->irq = platform_get_irq(pdev, 0); - - /* Install the interrupt handler */ - if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) { -@@ -1043,7 +1050,9 @@ - } else if (machine_is_csb337()) { - /* mix link activity status into LED2 link state */ - write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22); -- } -+ } else if (machine_is_ecbat91()) -+ write_phy(phy_address, MII_LEDCTRL_REG, 0x156A); -+ - disable_mdi(); - spin_unlock_irq(&lp->lock); - -@@ -1058,12 +1067,12 @@ - lp->phy_address = phy_address; /* MDI address of PHY */ - - /* Register the network interface */ -- res = register_netdev(dev); -- if (res) { -+ ret = register_netdev(dev); -+ if (ret) { - free_irq(dev->irq, dev); - free_netdev(dev); - dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); -- return res; -+ return ret; - } - - /* Determine current link speed */ -@@ -1101,6 +1110,8 @@ - printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); - else if (phy_type == MII_AC101L_ID) - printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); -+ else if (phy_type == MII_KSZ8041_ID) -+ printk(KERN_INFO "%s: Micrel KSZ8041 PHY\n", dev->name); - else if (phy_type == MII_KS8721_ID) - printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); - else if (phy_type == MII_T78Q21x3_ID) -@@ -1146,6 +1157,7 @@ - case MII_DP83847_ID: /* National Semiconductor DP83847: */ - case MII_DP83848_ID: /* National Semiconductor DP83848: */ - case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ -+ case MII_KSZ8041_ID: /* Micrel KSZ8041: PHY_ID1 = 0x22, PHY_ID2 = 0x1512 */ - case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ - case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ - case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ -diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h ---- linux-2.6.24/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/net/arm/at91_ether.h 2008-01-01 15:13:39.000000000 +0200 -@@ -48,6 +48,9 @@ - /* Altima AC101L PHY */ - #define MII_AC101L_ID 0x00225520 - -+/* Micrel KSZ8041 PHY */ -+#define MII_KSZ8041_ID 0x00221510 -+ - /* Micrel KS8721 PHY */ - #define MII_KS8721_ID 0x00221610 - -diff -urN -x CVS linux-2.6.24/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig ---- linux-2.6.24/drivers/rtc/Kconfig 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/rtc/Kconfig 2008-02-24 18:13:06.000000000 +0200 -@@ -440,10 +440,47 @@ - AT32AP700x family processors. - - config RTC_DRV_AT91RM9200 -- tristate "AT91RM9200" -- depends on ARCH_AT91RM9200 -+ tristate "AT91RM9200 or AT91SAM9RL" -+ depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL - help -- Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock). -+ Driver for the internal RTC (Realtime Clock) module found on -+ Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips -+ this is powered by the backup power supply. -+ -+config RTC_DRV_AT91SAM9 -+ tristate "AT91SAM9x" -+ depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) -+ help -+ RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer). -+ These timers are powered by the backup power supply (such as a -+ small coin cell battery), but do not need to be used as RTCs. -+ -+ (On AT91SAM9rl chips you probably want to use the dedicated RTC -+ module and leave the RTT available for other uses.) -+ -+config RTC_DRV_AT91SAM9_RTT -+ int -+ range 0 1 -+ default 0 -+ prompt "RTT module Number" if ARCH_AT91SAM9263 -+ depends on RTC_DRV_AT91SAM9 -+ help -+ More than one RTT module is available. You can choose which -+ one will be used as an RTC. The default of zero is normally -+ OK to use, though some systems use that for non-RTC purposes. -+ -+config RTC_DRV_AT91SAM9_GPBR -+ int -+ range 0 3 if !ARCH_AT91SAM9263 -+ range 0 15 if ARCH_AT91SAM9263 -+ default 0 -+ prompt "Backup Register Number" -+ depends on RTC_DRV_AT91SAM9 -+ help -+ The RTC driver needs to use one of the General Purpose Backup -+ Registers (GPBRs) as well as the RTT. You can choose which one -+ will be used. The default of zero is normally OK to use, but -+ on some systems other software needs to use that register. - - config RTC_DRV_BFIN - tristate "Blackfin On-Chip RTC" -diff -urN -x CVS linux-2.6.24/drivers/rtc/Makefile linux-2.6/drivers/rtc/Makefile ---- linux-2.6.24/drivers/rtc/Makefile 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/rtc/Makefile 2007-12-31 10:44:31.000000000 +0200 -@@ -19,6 +19,7 @@ - - obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o - obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o -+obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o - obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o - obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o - obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o -diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c ---- linux-2.6.24/drivers/rtc/rtc-at91rm9200.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-02-25 22:32:47.000000000 +0200 -@@ -307,12 +307,6 @@ - return ret; - } - -- /* cpu init code should really have flagged this device as -- * being wake-capable; if it didn't, do that here. -- */ -- if (!device_can_wakeup(&pdev->dev)) -- device_init_wakeup(&pdev->dev, 1); -- - rtc = rtc_device_register(pdev->name, &pdev->dev, - &at91_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) { -diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c ---- linux-2.6.24/drivers/rtc/rtc-at91sam9.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-03-01 21:54:39.000000000 +0200 -@@ -0,0 +1,526 @@ -+/* -+ * "RTT as Real Time Clock" driver for AT91SAM9 SoC family -+ * -+ * (C) 2007 Michel Benoit -+ * -+ * Based on rtc-at91rm9200.c by Rick Bronson -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/time.h> -+#include <linux/rtc.h> -+#include <linux/interrupt.h> -+#include <linux/ioctl.h> -+ -+#include <asm/mach/time.h> -+#include <asm/arch/board.h> -+#include <asm/arch/at91_rtt.h> -+ -+ -+/* -+ * This driver uses two configurable hardware resources that live in the -+ * AT91SAM9 backup power domain (intended to be powered at all times) -+ * to implement the Real Time Clock interfaces -+ * -+ * - A "Real-time Timer" (RTT) counts up in seconds from a base time. -+ * We can't assign the counter value (CRTV) ... but we can reset it. -+ * -+ * - One of the "General Purpose Backup Registers" (GPBRs) holds the -+ * base time, normally an offset from the beginning of the POSIX -+ * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the -+ * local timezone's offset. -+ * -+ * The RTC's value is the RTT counter plus that offset. The RTC's alarm -+ * is likewise a base (ALMV) plus that offset. -+ * -+ * Not all RTTs will be used as RTCs; some systems have multiple RTTs to -+ * choose from, or a "real" RTC module. All systems have multiple GPBR -+ * registers available, likewise usable for more than "RTC" support. -+ */ -+ -+/* -+ * We store ALARM_DISABLED in ALMV to record that no alarm is set. -+ * It's also the reset value for that field. -+ */ -+#define ALARM_DISABLED ((u32)~0) -+ -+ -+struct sam9_rtc { -+ void __iomem *rtt; -+ struct rtc_device *rtcdev; -+ u32 imr; -+}; -+ -+#define rtt_readl(rtc, field) \ -+ __raw_readl((rtc)->rtt + AT91_RTT_ ## field) -+#define rtt_writel(rtc, field, val) \ -+ __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field) -+ -+#define gpbr_readl(rtc) \ -+ at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR) -+#define gpbr_writel(rtc, val) \ -+ at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val)) -+ -+/* -+ * Read current time and date in RTC -+ */ -+static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) -+{ -+ struct sam9_rtc *rtc = dev_get_drvdata(dev); -+ u32 secs, secs2; -+ u32 offset; -+ -+ /* read current time offset */ -+ offset = gpbr_readl(rtc); -+ if (offset == 0) -+ return -EILSEQ; -+ -+ /* reread the counter to help sync the two clock domains */ -+ secs = rtt_readl(rtc, VR); -+ secs2 = rtt_readl(rtc, VR); -+ if (secs != secs2) -+ secs = rtt_readl(rtc, VR); -+ -+ rtc_time_to_tm(offset + secs, tm); -+ -+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime", -+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ -+ return 0; -+} -+ -+/* -+ * Set current time and date in RTC -+ */ -+static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) -+{ -+ struct sam9_rtc *rtc = dev_get_drvdata(dev); -+ int err; -+ u32 offset, alarm, mr; -+ unsigned long secs; -+ -+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime", -+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ -+ err = rtc_tm_to_time(tm, &secs); -+ if (err != 0) -+ return err; -+ -+ mr = rtt_readl(rtc, MR); -+ -+ /* disable interrupts */ -+ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); -+ -+ /* read current time offset */ -+ offset = gpbr_readl(rtc); -+ -+ /* store the new base time in a battery backup register */ -+ secs += 1; -+ gpbr_writel(rtc, secs); -+ -+ /* adjust the alarm time for the new base */ -+ alarm = rtt_readl(rtc, AR); -+ if (alarm != ALARM_DISABLED) { -+ if (offset > secs) { -+ /* time jumped backwards, increase time until alarm */ -+ alarm += (offset - secs); -+ } else if ((alarm + offset) > secs) { -+ /* time jumped forwards, decrease time until alarm */ -+ alarm -= (secs - offset); -+ } else { -+ /* time jumped past the alarm, disable alarm */ -+ alarm = ALARM_DISABLED; -+ mr &= ~AT91_RTT_ALMIEN; -+ } -+ rtt_writel(rtc, AR, alarm); -+ } -+ -+ /* reset the timer, and re-enable interrupts */ -+ rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST); -+ -+ return 0; -+} -+ -+/* -+ * Read alarm time and date in RTC -+ */ -+static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct sam9_rtc *rtc = dev_get_drvdata(dev); -+ struct rtc_time *tm = &alrm->time; -+ u32 alarm = rtt_readl(rtc, AR); -+ u32 offset; -+ -+ offset = gpbr_readl(rtc); -+ if (offset == 0) -+ return -EILSEQ; -+ -+ memset(alrm, 0, sizeof(alrm)); -+ if (alarm != ALARM_DISABLED && offset != 0) { -+ rtc_time_to_tm(offset + alarm, tm); -+ -+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm", -+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ -+ if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN) -+ alrm->enabled = 1; -+ } -+ -+ return 0; -+} -+ -+/* -+ * Set alarm time and date in RTC -+ */ -+static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct sam9_rtc *rtc = dev_get_drvdata(dev); -+ struct rtc_time *tm = &alrm->time; -+ unsigned long secs; -+ u32 offset; -+ u32 mr; -+ int err; -+ -+ err = rtc_tm_to_time(tm, &secs); -+ if (err != 0) -+ return err; -+ -+ offset = gpbr_readl(rtc); -+ if (offset == 0) { -+ /* time is not set */ -+ return -EILSEQ; -+ } -+ mr = rtt_readl(rtc, MR); -+ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); -+ -+ /* alarm in the past? finish and leave disabled */ -+ if (secs <= offset) { -+ rtt_writel(rtc, AR, ALARM_DISABLED); -+ return 0; -+ } -+ -+ /* else set alarm and maybe enable it */ -+ rtt_writel(rtc, AR, secs - offset); -+ if (alrm->enabled) -+ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); -+ -+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm", -+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, -+ tm->tm_min, tm->tm_sec); -+ -+ return 0; -+} -+ -+/* -+ * Handle commands from user-space -+ */ -+static int at91_rtc_ioctl(struct device *dev, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct sam9_rtc *rtc = dev_get_drvdata(dev); -+ int ret = 0; -+ u32 mr = rtt_readl(rtc, MR); -+ -+ dev_dbg(dev, "ioctl: cmd=%08x, arg=%08lx, mr %08x\n", cmd, arg, mr); -+ -+ switch (cmd) { -+ case RTC_AIE_OFF: /* alarm off */ -+ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); -+ break; -+ case RTC_AIE_ON: /* alarm on */ -+ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); -+ break; -+ case RTC_UIE_OFF: /* update off */ -+ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); -+ break; -+ case RTC_UIE_ON: /* update on */ -+ rtt_writel(rtc, MR, mr | AT91_RTT_RTTINCIEN); -+ break; -+ default: -+ ret = -ENOIOCTLCMD; -+ break; -+ } -+ -+ return ret; -+} -+ -+/* -+ * Provide additional RTC information in /proc/driver/rtc -+ */ -+static int at91_rtc_proc(struct device *dev, struct seq_file *seq) -+{ -+ struct sam9_rtc *rtc = dev_get_drvdata(dev); -+ u32 mr = mr = rtt_readl(rtc, MR); -+ -+ seq_printf(seq, "update_IRQ\t: %s\n", -+ (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no"); -+ return 0; -+} -+ -+/* -+ * IRQ handler for the RTC -+ */ -+static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc) -+{ -+ struct sam9_rtc *rtc = _rtc; -+ u32 sr, mr; -+ unsigned long events = 0; -+ -+ /* Shared interrupt may be for another device. Note: reading -+ * SR clears it, so we must only read it in this irq handler! -+ */ -+ mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); -+ sr = rtt_readl(rtc, SR) & mr; -+ if (!sr) -+ return IRQ_NONE; -+ -+ /* alarm status */ -+ if (sr & AT91_RTT_ALMS) -+ events |= (RTC_AF | RTC_IRQF); -+ -+ /* timer update/increment */ -+ if (sr & AT91_RTT_RTTINC) -+ events |= (RTC_UF | RTC_IRQF); -+ -+ rtc_update_irq(rtc->rtcdev, 1, events); -+ -+ pr_debug("%s: num=%ld, events=0x%02lx\n", __FUNCTION__, -+ events >> 8, events & 0x000000FF); -+ -+ return IRQ_HANDLED; -+} -+ -+static const struct rtc_class_ops at91_rtc_ops = { -+ .ioctl = at91_rtc_ioctl, -+ .read_time = at91_rtc_readtime, -+ .set_time = at91_rtc_settime, -+ .read_alarm = at91_rtc_readalarm, -+ .set_alarm = at91_rtc_setalarm, -+ .proc = at91_rtc_proc, -+}; -+ -+/* -+ * Initialize and install RTC driver -+ */ -+static int __init at91_rtc_probe(struct platform_device *pdev) -+{ -+ struct resource *r; -+ struct sam9_rtc *rtc; -+ int ret; -+ u32 mr; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!r) -+ return -ENODEV; -+ -+ rtc = kzalloc(sizeof *rtc, GFP_KERNEL); -+ if (!rtc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, rtc); -+ rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS); -+ rtc->rtt += r->start; -+ -+ mr = rtt_readl(rtc, MR); -+ -+ /* unless RTT is counting at 1 Hz, re-initialize it */ -+ if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) { -+ mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES); -+ gpbr_writel(rtc, 0); -+ } -+ -+ /* disable all interrupts (same as on shutdown path) */ -+ mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); -+ rtt_writel(rtc, MR, mr); -+ -+ rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev, -+ &at91_rtc_ops, THIS_MODULE); -+ if (IS_ERR(rtc->rtcdev)) { -+ ret = PTR_ERR(rtc->rtcdev); -+ goto fail; -+ } -+ -+ /* register irq handler after we know what name we'll use */ -+ ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, -+ IRQF_DISABLED | IRQF_SHARED, -+ rtc->rtcdev->dev.bus_id, rtc); -+ if (ret) { -+ dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); -+ rtc_device_unregister(rtc->rtcdev); -+ goto fail; -+ } -+ -+ /* NOTE: sam9260 rev A silicon has a ROM bug which resets the -+ * RTT on at least some reboots. If you have that chip, you must -+ * initialize the time from some external source like a GPS, wall -+ * clock, discrete RTC, etc -+ */ -+ -+ if (gpbr_readl(rtc) == 0) -+ dev_warn(&pdev->dev, "%s: SET TIME!\n", -+ rtc->rtcdev->dev.bus_id); -+ -+ return 0; -+ -+fail: -+ platform_set_drvdata(pdev, NULL); -+ kfree(rtc); -+ return ret; -+} -+ -+/* -+ * Disable and remove the RTC driver -+ */ -+static int __exit at91_rtc_remove(struct platform_device *pdev) -+{ -+ struct sam9_rtc *rtc = platform_get_drvdata(pdev); -+ u32 mr = rtt_readl(rtc, MR); -+ -+ /* disable all interrupts */ -+ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); -+ free_irq(AT91_ID_SYS, rtc); -+ -+ rtc_device_unregister(rtc->rtcdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ kfree(rtc); -+ return 0; -+} -+ -+static void at91_rtc_shutdown(struct platform_device *pdev) -+{ -+ struct sam9_rtc *rtc = platform_get_drvdata(pdev); -+ u32 mr = rtt_readl(rtc, MR); -+ -+ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); -+ rtt_writel(rtc, MR, mr & ~rtc->imr); -+} -+ -+#ifdef CONFIG_PM -+ -+/* AT91SAM9 RTC Power management control */ -+ -+static int at91_rtc_suspend(struct platform_device *pdev, -+ pm_message_t state) -+{ -+ struct sam9_rtc *rtc = platform_get_drvdata(pdev); -+ u32 mr = rtt_readl(rtc, MR); -+ -+ /* -+ * This IRQ is shared with DBGU and other hardware which isn't -+ * necessarily a wakeup event source. -+ */ -+ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); -+ if (rtc->imr) { -+ if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { -+ enable_irq_wake(AT91_ID_SYS); -+ /* don't let RTTINC cause wakeups */ -+ if (mr & AT91_RTT_RTTINCIEN) -+ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); -+ } else -+ rtt_writel(rtc, MR, mr & ~rtc->imr); -+ } -+ -+ return 0; -+} -+ -+static int at91_rtc_resume(struct platform_device *pdev) -+{ -+ struct sam9_rtc *rtc = platform_get_drvdata(pdev); -+ u32 mr; -+ -+ if (rtc->imr) { -+ if (device_may_wakeup(&pdev->dev)) -+ disable_irq_wake(AT91_ID_SYS); -+ mr = rtt_readl(rtc, MR); -+ rtt_writel(rtc, MR, mr | rtc->imr); -+ } -+ -+ return 0; -+} -+#else -+#define at91_rtc_suspend NULL -+#define at91_rtc_resume NULL -+#endif -+ -+static struct platform_driver at91_rtc_driver = { -+ .driver.name = "rtc-at91sam9", -+ .driver.owner = THIS_MODULE, -+ .remove = __exit_p(at91_rtc_remove), -+ .shutdown = at91_rtc_shutdown, -+ .suspend = at91_rtc_suspend, -+ .resume = at91_rtc_resume, -+}; -+ -+/* Chips can have more than one RTT module, and they can be used for more -+ * than just RTCs. So we can't just register as "the" RTT driver. -+ * -+ * A normal approach in such cases is to create a library to allocate and -+ * free the modules. Here we just use bus_find_device() as like such a -+ * library, binding directly ... no runtime "library" footprint is needed. -+ */ -+static int __init at91_rtc_match(struct device *dev, void *v) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ int ret; -+ -+ /* continue searching if this isn't the RTT we need */ -+ if (strcmp("at91_rtt", pdev->name) != 0 -+ || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT) -+ goto fail; -+ -+ /* else we found it ... but fail unless we can bind to the RTC driver */ -+ if (dev->driver) { -+ dev_dbg(dev, "busy, can't use as RTC!\n"); -+ goto fail; -+ } -+ dev->driver = &at91_rtc_driver.driver; -+ if (device_attach(dev) == 0) { -+ dev_dbg(dev, "can't attach RTC!\n"); -+ goto fail; -+ } -+ ret = at91_rtc_probe(pdev); -+ if (ret == 0) -+ return true; -+ -+ dev_dbg(dev, "RTC probe err %d!\n", ret); -+fail: -+ return false; -+} -+ -+static int __init at91_rtc_init(void) -+{ -+ int status; -+ struct device *rtc; -+ -+ status = platform_driver_register(&at91_rtc_driver); -+ if (status) -+ return status; -+ rtc = bus_find_device(&platform_bus_type, NULL, -+ NULL, at91_rtc_match); -+ if (!rtc) -+ platform_driver_unregister(&at91_rtc_driver); -+ return rtc ? 0 : -ENODEV; -+} -+module_init(at91_rtc_init); -+ -+static void __exit at91_rtc_exit(void) -+{ -+ platform_driver_unregister(&at91_rtc_driver); -+} -+module_exit(at91_rtc_exit); -+ -+ -+MODULE_AUTHOR("Michel Benoit"); -+MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x"); -+MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.c linux-2.6/drivers/serial/atmel_serial.c ---- linux-2.6.24/drivers/serial/atmel_serial.c 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/serial/atmel_serial.c 2008-02-24 19:02:50.000000000 +0200 -@@ -7,6 +7,8 @@ - * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * -+ * DMA support added by Chip Coldwell. -+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or -@@ -33,7 +35,9 @@ - #include <linux/sysrq.h> - #include <linux/tty_flip.h> - #include <linux/platform_device.h> -+#include <linux/dma-mapping.h> - #include <linux/atmel_pdc.h> -+#include <linux/atmel_serial.h> - - #include <asm/io.h> - -@@ -45,7 +49,10 @@ - #include <asm/arch/gpio.h> - #endif - --#include "atmel_serial.h" -+#define SUPPORT_PDC -+#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3) -+#warning "Revisit" -+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ - - #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) - #define SUPPORT_SYSRQ -@@ -107,6 +114,13 @@ - static int (*atmel_open_hook)(struct uart_port *); - static void (*atmel_close_hook)(struct uart_port *); - -+struct atmel_dma_buffer { -+ unsigned char *buf; -+ dma_addr_t dma_addr; -+ size_t dma_size; -+ unsigned int ofs; -+}; -+ - /* - * We wrap our port structure around the generic uart_port. - */ -@@ -115,10 +129,20 @@ - struct clk *clk; /* uart clock */ - unsigned short suspended; /* is port suspended? */ - int break_active; /* break being received */ -+ -+ short use_dma_rx; /* enable PDC receiver */ -+ short pdc_rx_idx; /* current PDC RX buffer */ -+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ -+ -+ short use_dma_tx; /* enable PDC transmitter */ -+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ - }; - - static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; - -+#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx] -+#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx -+ - #ifdef SUPPORT_SYSRQ - static struct console atmel_console; - #endif -@@ -204,7 +228,14 @@ - */ - static void atmel_stop_tx(struct uart_port *port) - { -- UART_PUT_IDR(port, ATMEL_US_TXRDY); -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ -+ if (atmel_port->use_dma_tx) { -+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ -+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); -+ } -+ else -+ UART_PUT_IDR(port, ATMEL_US_TXRDY); - } - - /* -@@ -212,7 +243,19 @@ - */ - static void atmel_start_tx(struct uart_port *port) - { -- UART_PUT_IER(port, ATMEL_US_TXRDY); -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ -+ if (atmel_port->use_dma_tx) { -+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) -+ /* The transmitter is already running. Yes, we -+ really need this.*/ -+ return; -+ -+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); -+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */ -+ } -+ else -+ UART_PUT_IER(port, ATMEL_US_TXRDY); - } - - /* -@@ -220,7 +263,14 @@ - */ - static void atmel_stop_rx(struct uart_port *port) - { -- UART_PUT_IDR(port, ATMEL_US_RXRDY); -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ -+ if (atmel_port->use_dma_rx) { -+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */ -+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); -+ } -+ else -+ UART_PUT_IDR(port, ATMEL_US_RXRDY); - } - - /* -@@ -243,6 +293,134 @@ - } - - /* -+ * Receive data via the PDC. A buffer has been fulled. -+ */ -+static void atmel_pdc_endrx(struct uart_port *port) -+{ -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ struct tty_struct *tty = port->info->tty; -+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port); -+ unsigned int count; -+ -+ count = pdc->dma_size - pdc->ofs; -+ if (likely(count > 0)) { -+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); -+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); -+ tty_flip_buffer_push(tty); -+ -+ port->icount.rx += count; -+ } -+ -+ /* Set this buffer as the next receive buffer */ -+ pdc->ofs = 0; -+ UART_PUT_RNPR(port, pdc->dma_addr); -+ UART_PUT_RNCR(port, pdc->dma_size); -+ -+ /* Switch to next buffer */ -+ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */ -+} -+ -+/* -+ * Receive data via the PDC. At least one byte was received, but the -+ * buffer was not full when the inter-character timeout expired. -+ */ -+static void atmel_pdc_timeout(struct uart_port *port) -+{ -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ struct tty_struct *tty = port->info->tty; -+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port); -+ /* unsigned */ int ofs, count; -+ -+ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */ -+ count = ofs - pdc->ofs; -+ -+ if (likely(count > 0)) { -+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); -+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); -+ tty_flip_buffer_push(tty); -+ -+ pdc->ofs = ofs; -+ port->icount.rx += count; -+ } -+ -+ /* reset the UART timeout */ -+ UART_PUT_CR(port, ATMEL_US_STTTO); -+} -+ -+/* -+ * Deal with parity, framing and overrun errors. -+ */ -+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) -+{ -+ /* clear error */ -+ UART_PUT_CR(port, ATMEL_US_RSTSTA); -+ -+ if (status & ATMEL_US_RXBRK) { -+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */ -+ port->icount.brk++; -+ } -+ if (status & ATMEL_US_PARE) -+ port->icount.parity++; -+ if (status & ATMEL_US_FRAME) -+ port->icount.frame++; -+ if (status & ATMEL_US_OVRE) -+ port->icount.overrun++; -+} -+ -+/* -+ * A transmission via the PDC is complete. -+ */ -+static void atmel_pdc_endtx(struct uart_port *port) -+{ -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ struct circ_buf *xmit = &port->info->xmit; -+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; -+ -+ xmit->tail += pdc->ofs; -+ if (xmit->tail >= SERIAL_XMIT_SIZE) -+ xmit->tail -= SERIAL_XMIT_SIZE; -+ -+ port->icount.tx += pdc->ofs; -+ pdc->ofs = 0; -+ -+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) -+ uart_write_wakeup(port); -+} -+ -+/* -+ * The PDC transmitter is idle, so either start the next transfer or -+ * disable the transmitter. -+ */ -+static void atmel_pdc_txbufe(struct uart_port *port) -+{ -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ struct circ_buf *xmit = &port->info->xmit; -+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; -+ int count; -+ -+ if (!uart_circ_empty(xmit)) { -+ /* more to transmit - setup next transfer */ -+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ -+ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE); -+ -+ if (xmit->tail < xmit->head) -+ count = xmit->head - xmit->tail; -+ else -+ count = SERIAL_XMIT_SIZE - xmit->tail; -+ pdc->ofs = count; -+ -+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); -+ UART_PUT_TCR(port, count); -+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */ -+ } -+ else { -+ /* nothing left to transmit - disable the transmitter */ -+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ -+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); -+ } -+} -+ -+/* - * Characters received (called from interrupt handler) - */ - static void atmel_rx_chars(struct uart_port *port) -@@ -361,6 +539,14 @@ - status = UART_GET_CSR(port); - pending = status & UART_GET_IMR(port); - while (pending) { -+ /* PDC receive */ -+ if (pending & ATMEL_US_ENDRX) -+ atmel_pdc_endrx(port); -+ if (pending & ATMEL_US_TIMEOUT) -+ atmel_pdc_timeout(port); -+ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE)) -+ atmel_pdc_rxerr(port, pending); -+ - /* Interrupt receive */ - if (pending & ATMEL_US_RXRDY) - atmel_rx_chars(port); -@@ -385,6 +571,12 @@ - if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC)) - wake_up_interruptible(&port->info->delta_msr_wait); - -+ /* PDC transmit */ -+ if (pending & ATMEL_US_ENDTX) -+ atmel_pdc_endtx(port); -+ if (pending & ATMEL_US_TXBUFE) -+ atmel_pdc_txbufe(port); -+ - /* Interrupt transmit */ - if (pending & ATMEL_US_TXRDY) - atmel_tx_chars(port); -@@ -403,6 +595,7 @@ - */ - static int atmel_startup(struct uart_port *port) - { -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; - int retval; - - /* -@@ -422,6 +615,47 @@ - } - - /* -+ * Initialize DMA (if necessary) -+ */ -+ if (atmel_port->use_dma_rx) { -+ int i; -+ -+ for (i = 0; i < 2; i++) { -+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; -+ -+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); -+ if (pdc->buf == NULL) { -+ if (i != 0) { -+ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); -+ kfree(atmel_port->pdc_rx[0].buf); -+ } -+ free_irq(port->irq, port); -+ return -ENOMEM; -+ } -+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); -+ pdc->dma_size = PDC_BUFFER_SIZE; -+ pdc->ofs = 0; -+ } -+ -+ atmel_port->pdc_rx_idx = 0; -+ -+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); -+ UART_PUT_RCR(port, PDC_BUFFER_SIZE); -+ -+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); -+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE); -+ } -+ if (atmel_port->use_dma_tx) { -+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; -+ struct circ_buf *xmit = &port->info->xmit; -+ -+ pdc->buf = xmit->buf; -+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE); -+ pdc->dma_size = SERIAL_XMIT_SIZE; -+ pdc->ofs = 0; -+ } -+ -+ /* - * If there is a specific "open" function (to register - * control line interrupts) - */ -@@ -439,7 +673,15 @@ - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */ - -- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */ -+ if (atmel_port->use_dma_rx) { -+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */ -+ UART_PUT_CR(port, ATMEL_US_STTTO); -+ -+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); -+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */ -+ } -+ else -+ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */ - - return 0; - } -@@ -449,6 +691,33 @@ - */ - static void atmel_shutdown(struct uart_port *port) - { -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; -+ -+ /* -+ * Ensure everything is stopped. -+ */ -+ atmel_stop_rx(port); -+ atmel_stop_tx(port); -+ -+ /* -+ * Shut-down the DMA. -+ */ -+ if (atmel_port->use_dma_rx) { -+ int i; -+ -+ for (i = 0; i < 2; i++) { -+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; -+ -+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); -+ kfree(pdc->buf); -+ } -+ } -+ if (atmel_port->use_dma_tx) { -+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; -+ -+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE); -+ } -+ - /* - * Disable all interrupts, port and break condition. - */ -@@ -500,6 +769,7 @@ - */ - static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old) - { -+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; - unsigned long flags; - unsigned int mode, imr, quot, baud; - -@@ -509,7 +779,7 @@ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - -- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ -+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ - quot /= 8; - mode |= ATMEL_US_USCLKS_MCK_DIV8; - } -@@ -558,6 +828,9 @@ - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= ATMEL_US_RXBRK; - -+ if (atmel_port->use_dma_rx) /* need to enable error interrupts */ -+ UART_PUT_IER(port, port->read_status_mask); -+ - /* - * Characters to ignore - */ -@@ -582,7 +855,8 @@ - /* disable interrupts and drain transmitter */ - imr = UART_GET_IMR(port); /* get interrupt mask */ - UART_PUT_IDR(port, -1); /* disable all interrupts */ -- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); } -+ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) -+ cpu_relax(); - - /* disable receiver and transmitter */ - UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); -@@ -736,6 +1010,13 @@ - clk_enable(atmel_port->clk); - port->uartclk = clk_get_rate(atmel_port->clk); - } -+ -+#ifdef SUPPORT_PDC -+ atmel_port->use_dma_rx = data->use_dma_rx; -+ atmel_port->use_dma_tx = data->use_dma_tx; -+ if (atmel_port->use_dma_tx) -+ port->fifosize = PDC_BUFFER_SIZE; -+#endif - } - - /* -@@ -760,7 +1041,7 @@ - static void atmel_console_putchar(struct uart_port *port, int ch) - { - while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) -- barrier(); -+ cpu_relax(); - UART_PUT_CHAR(port, ch); - } - -@@ -798,13 +1079,13 @@ - { - unsigned int mr, quot; - --// TODO: CR is a write-only register --// unsigned int cr; --// --// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN); --// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) { --// /* ok, the port was enabled */ --// } -+ /* -+ * If the baud rate generator isn't running, the port wasn't -+ * initialized by the boot loader. -+ */ -+ quot = UART_GET_BRGR(port); -+ if (!quot) -+ return; - - mr = UART_GET_MR(port) & ATMEL_US_CHRL; - if (mr == ATMEL_US_CHRL_8) -@@ -824,7 +1105,6 @@ - * lower than one of those, as it would make us fall through - * to a much lower baud rate than we really want. - */ -- quot = UART_GET_BRGR(port); - *baud = port->uartclk / (16 * (quot - 1)); - } - -@@ -912,7 +1192,8 @@ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; - -- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock()) -+ if (device_may_wakeup(&pdev->dev) -+ && !clk_must_disable(atmel_port->clk)) - enable_irq_wake(port->irq); - else { - uart_suspend_port(&atmel_uart, port); -diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.h linux-2.6/drivers/serial/atmel_serial.h ---- linux-2.6.24/drivers/serial/atmel_serial.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/serial/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200 -@@ -1,127 +0,0 @@ --/* -- * drivers/serial/atmel_serial.h -- * -- * Copyright (C) 2005 Ivan Kokshaysky -- * Copyright (C) SAN People -- * -- * USART registers. -- * Based on AT91RM9200 datasheet revision E. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- */ -- --#ifndef ATMEL_SERIAL_H --#define ATMEL_SERIAL_H -- --#define ATMEL_US_CR 0x00 /* Control Register */ --#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */ --#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */ --#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */ --#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */ --#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */ --#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */ --#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */ --#define ATMEL_US_STTBRK (1 << 9) /* Start Break */ --#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */ --#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */ --#define ATMEL_US_SENDA (1 << 12) /* Send Address */ --#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ --#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ --#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ --#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ --#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ --#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ --#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ -- --#define ATMEL_US_MR 0x04 /* Mode Register */ --#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */ --#define ATMEL_US_USMODE_NORMAL 0 --#define ATMEL_US_USMODE_RS485 1 --#define ATMEL_US_USMODE_HWHS 2 --#define ATMEL_US_USMODE_MODEM 3 --#define ATMEL_US_USMODE_ISO7816_T0 4 --#define ATMEL_US_USMODE_ISO7816_T1 6 --#define ATMEL_US_USMODE_IRDA 8 --#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ --#define ATMEL_US_USCLKS_MCK (0 << 4) --#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) --#define ATMEL_US_USCLKS_SCK (3 << 4) --#define ATMEL_US_CHRL (3 << 6) /* Character Length */ --#define ATMEL_US_CHRL_5 (0 << 6) --#define ATMEL_US_CHRL_6 (1 << 6) --#define ATMEL_US_CHRL_7 (2 << 6) --#define ATMEL_US_CHRL_8 (3 << 6) --#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */ --#define ATMEL_US_PAR (7 << 9) /* Parity Type */ --#define ATMEL_US_PAR_EVEN (0 << 9) --#define ATMEL_US_PAR_ODD (1 << 9) --#define ATMEL_US_PAR_SPACE (2 << 9) --#define ATMEL_US_PAR_MARK (3 << 9) --#define ATMEL_US_PAR_NONE (4 << 9) --#define ATMEL_US_PAR_MULTI_DROP (6 << 9) --#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */ --#define ATMEL_US_NBSTOP_1 (0 << 12) --#define ATMEL_US_NBSTOP_1_5 (1 << 12) --#define ATMEL_US_NBSTOP_2 (2 << 12) --#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */ --#define ATMEL_US_CHMODE_NORMAL (0 << 14) --#define ATMEL_US_CHMODE_ECHO (1 << 14) --#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) --#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) --#define ATMEL_US_MSBF (1 << 16) /* Bit Order */ --#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */ --#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */ --#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */ --#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ --#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */ --#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */ --#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ -- --#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ --#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */ --#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */ --#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */ --#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */ --#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ --#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */ --#define ATMEL_US_FRAME (1 << 6) /* Framing Error */ --#define ATMEL_US_PARE (1 << 7) /* Parity Error */ --#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */ --#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */ --#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ --#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ --#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ --#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ --#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ --#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ --#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ --#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ --#define ATMEL_US_RI (1 << 20) /* RI */ --#define ATMEL_US_DSR (1 << 21) /* DSR */ --#define ATMEL_US_DCD (1 << 22) /* DCD */ --#define ATMEL_US_CTS (1 << 23) /* CTS */ -- --#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ --#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ --#define ATMEL_US_CSR 0x14 /* Channel Status Register */ --#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ --#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ --#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ -- --#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ --#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ -- --#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ --#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */ -- --#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ --#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */ -- --#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ --#define ATMEL_US_NER 0x44 /* Number of Errors Register */ --#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ -- --#endif -diff -urN -x CVS linux-2.6.24/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig ---- linux-2.6.24/drivers/spi/Kconfig 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/spi/Kconfig 2007-12-31 10:44:31.000000000 +0200 -@@ -100,6 +100,15 @@ - inexpensive battery powered microcontroller evaluation board. - This same cable can be used to flash new firmware. - -+config SPI_AT91 -+ tristate "AT91RM9200 Bitbang SPI Master" -+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200. -+ The SPI_ATMEL driver will be its replacement, using the native -+ SPI hardware and its DMA controller. -+ - config SPI_IMX - tristate "Freescale iMX SPI controller" - depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL -diff -urN -x CVS linux-2.6.24/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile ---- linux-2.6.24/drivers/spi/Makefile 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/spi/Makefile 2007-12-31 10:44:31.000000000 +0200 -@@ -27,6 +27,7 @@ - obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o - obj-$(CONFIG_SPI_TXX9) += spi_txx9.o - obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o -+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) -diff -urN -x CVS linux-2.6.24/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c ---- linux-2.6.24/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2007-12-31 15:18:43.000000000 +0200 -@@ -0,0 +1,207 @@ -+/* -+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION) -+ * -+ * Copyright (C) 2006 David Brownell -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+ -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_bitbang.h> -+ -+#include <asm/arch/gpio.h> -+ -+ -+/* -+ * FIXME this bitbanging version is just to help bootstrap systems until -+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should -+ * be a drop-in replacement for this one, and much faster. -+ * -+ * remember: -+ * -+ * - other at91 parts (like at91sam9) have multiple controllers -+ * and different pin muxing; this version is at91rm9200 specfic. -+ * -+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins. -+ * -+ * - rm9200 spi chipselects drop wrongly, so the native driver -+ * will need to use gpios much like this does. -+ * -+ * - real hardware only allows 8..16 bits per word, while this -+ * bitbanger allows 1..32 (incompatible superset). -+ * -+ * - this disregards clock parameters. with inlined gpio calls, -+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster -+ * than using the subroutined veresion from txrx_word(). -+ * -+ * - suspend/resume and <linux/clk.h> support is missing ... -+ */ -+ -+#define spi_miso_bit AT91_PIN_PA0 -+#define spi_mosi_bit AT91_PIN_PA1 -+#define spi_sck_bit AT91_PIN_PA2 -+ -+struct at91_spi { -+ struct spi_bitbang bitbang; -+ struct platform_device *pdev; -+}; -+ -+/*----------------------------------------------------------------------*/ -+ -+static inline void setsck(struct spi_device *spi, int is_on) -+{ -+ at91_set_gpio_value(spi_sck_bit, is_on); -+} -+ -+static inline void setmosi(struct spi_device *spi, int is_on) -+{ -+ at91_set_gpio_value(spi_mosi_bit, is_on); -+} -+ -+static inline int getmiso(struct spi_device *spi) -+{ -+ return at91_get_gpio_value(spi_miso_bit); -+} -+ -+static void at91_spi_chipselect(struct spi_device *spi, int is_active) -+{ -+ unsigned long cs = (unsigned long) spi->controller_data; -+ -+ /* set default clock polarity */ -+ if (is_active) -+ setsck(spi, spi->mode & SPI_CPOL); -+ -+ /* only support active-low (default) */ -+ at91_set_gpio_value(cs, !is_active); -+} -+ -+/* -+ * NOTE: this is "as fast as we can"; it should be a function of -+ * the device clock ... -+ */ -+#define spidelay(X) do{} while(0) -+ -+#define EXPAND_BITBANG_TXRX -+#include <linux/spi/spi_bitbang.h> -+ -+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8); -+} -+ -+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8); -+} -+ -+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8); -+} -+ -+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8); -+} -+ -+/*----------------------------------------------------------------------*/ -+ -+static int __init at91_spi_probe(struct platform_device *pdev) -+{ -+ int status; -+ struct spi_master *master; -+ struct at91_spi *at91_spi; -+ -+ if (pdev->id != 0) /* SPI0 bus */ -+ return -EINVAL; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi); -+ if (!master) -+ return -ENOMEM; -+ -+ at91_spi = spi_master_get_devdata(master); -+ at91_spi->pdev = pdev; -+ platform_set_drvdata(pdev, at91_spi); -+ -+ /* SPI and bitbang hookup */ -+ master->bus_num = 0; -+ master->num_chipselect = 4; -+ -+ at91_spi->bitbang.master = spi_master_get(master); -+ at91_spi->bitbang.chipselect = at91_spi_chipselect; -+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0; -+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1; -+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2; -+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3; -+ -+ status = spi_bitbang_start(&at91_spi->bitbang); -+ if (status < 0) -+ (void) spi_master_put(at91_spi->bitbang.master); -+ -+ return status; -+} -+ -+static int __exit at91_spi_remove(struct platform_device *pdev) -+{ -+ struct at91_spi *at91_spi = platform_get_drvdata(pdev); -+ int status; -+ -+ /* stop() unregisters child devices too */ -+ status = spi_bitbang_stop(&at91_spi->bitbang); -+ (void) spi_master_put(at91_spi->bitbang.master); -+ -+ platform_set_drvdata(pdev, NULL); -+ return status; -+} -+ -+static struct platform_driver at91_spi_driver = { -+ .probe = at91_spi_probe, -+ .remove = __exit_p(at91_spi_remove), -+ .driver = { -+ .name = "at91_spi", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init at91_spi_init(void) -+{ -+ at91_set_gpio_output(spi_sck_bit, 0); -+ at91_set_gpio_output(spi_mosi_bit, 0); -+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */); -+ -+ /* register driver */ -+ return platform_driver_register(&at91_spi_driver); -+} -+ -+static void __exit at91_spi_exit(void) -+{ -+ platform_driver_unregister(&at91_spi_driver); -+} -+ -+device_initcall(at91_spi_init); -+module_exit(at91_spi_exit); -+ -+MODULE_ALIAS("at91_spi.0"); -+ -+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)"); -+MODULE_AUTHOR("David Brownell"); -+MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig ---- linux-2.6.24/drivers/usb/gadget/Kconfig 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/usb/gadget/Kconfig 2008-01-16 20:26:55.000000000 +0200 -@@ -308,7 +308,7 @@ - - config USB_GADGET_AT91 - boolean "AT91 USB Device Port" -- depends on ARCH_AT91 && !ARCH_AT91SAM9RL -+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 - select USB_GADGET_SELECTED - help - Many Atmel AT91 processors (such as the AT91RM2000) have a -diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c ---- linux-2.6.24/drivers/usb/gadget/at91_udc.c 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/usb/gadget/at91_udc.c 2007-12-31 10:44:31.000000000 +0200 -@@ -1784,7 +1784,7 @@ - */ - if ((!udc->suspended && udc->addr) - || !wake -- || at91_suspend_entering_slow_clock()) { -+ || clk_must_disable(udc->fclk)) { - pullup(udc, 0); - wake = 0; - } else -diff -urN -x CVS linux-2.6.24/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c ---- linux-2.6.24/drivers/usb/host/ohci-at91.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/usb/host/ohci-at91.c 2007-12-31 14:05:15.000000000 +0200 -@@ -299,7 +299,7 @@ - * - * REVISIT: some boards will be able to turn VBUS off... - */ -- if (at91_suspend_entering_slow_clock()) { -+ if (clk_must_disable(fclk)) { - ohci_usb_reset (ohci); - at91_stop_clock(); - } -diff -urN -x CVS linux-2.6.24/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig ---- linux-2.6.24/drivers/video/Kconfig 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/video/Kconfig 2008-01-16 21:25:17.000000000 +0200 -@@ -876,6 +876,17 @@ - framebuffer. Product specs at - <http://www.erd.epson.com/vdc/html/products.htm>. - -+config FB_S1D15605 -+ tristate "Epson S1D15605 framebuffer support" -+ depends on FB -+ default m if MACH_KB9200 -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ help -+ Build in support for the S1D15605 Epson Research 128x64 -+ LCD controller as a framebuffer. -+ - config FB_S1D13XXX - tristate "Epson S1D13XXX framebuffer support" - depends on FB -@@ -889,7 +900,7 @@ - - config FB_ATMEL - tristate "AT91/AT32 LCD Controller support" -- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32) -+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT -diff -urN -x CVS linux-2.6.24/drivers/video/Makefile linux-2.6/drivers/video/Makefile ---- linux-2.6.24/drivers/video/Makefile 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/video/Makefile 2007-12-31 10:44:31.000000000 +0200 -@@ -87,7 +87,8 @@ - obj-$(CONFIG_FB_SA1100) += sa1100fb.o - obj-$(CONFIG_FB_HIT) += hitfb.o - obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o --obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o -+obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o -+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o - obj-$(CONFIG_FB_PVR2) += pvr2fb.o - obj-$(CONFIG_FB_VOODOO1) += sstfb.o - obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o -diff -urN -x CVS linux-2.6.24/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c ---- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-03-01 22:02:13.000000000 +0200 -+++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-02-25 22:42:48.000000000 +0200 -@@ -16,6 +16,7 @@ - #include <linux/fb.h> - #include <linux/init.h> - #include <linux/delay.h> -+#include <linux/backlight.h> - - #include <asm/arch/board.h> - #include <asm/arch/cpu.h> -@@ -30,7 +31,7 @@ - #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 - #define ATMEL_LCDC_DMA_BURST_LEN 8 - --#if defined(CONFIG_ARCH_AT91SAM9263) -+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) - #define ATMEL_LCDC_FIFO_SIZE 2048 - #else - #define ATMEL_LCDC_FIFO_SIZE 512 -@@ -69,6 +70,107 @@ - } - #endif - -+static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8 -+ | ATMEL_LCDC_POL_POSITIVE -+ | ATMEL_LCDC_ENA_PWMENABLE; -+ -+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC -+ -+/* some bl->props field just changed */ -+static int atmel_bl_update_status(struct backlight_device *bl) -+{ -+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl); -+ int power = sinfo->bl_power; -+ int brightness = bl->props.brightness; -+ -+ /* REVISIT there may be a meaningful difference between -+ * fb_blank and power ... there seem to be some cases -+ * this doesn't handle correctly. -+ */ -+ if (bl->props.fb_blank != sinfo->bl_power) -+ power = bl->props.fb_blank; -+ else if (bl->props.power != sinfo->bl_power) -+ power = bl->props.power; -+ -+ if (brightness < 0 && power == FB_BLANK_UNBLANK) -+ brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); -+ else if (power != FB_BLANK_UNBLANK) -+ brightness = 0; -+ -+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness); -+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, -+ brightness ? contrast_ctr : 0); -+ -+ bl->props.fb_blank = bl->props.power = sinfo->bl_power = power; -+ -+ return 0; -+} -+ -+static int atmel_bl_get_brightness(struct backlight_device *bl) -+{ -+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl); -+ -+ return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); -+} -+ -+static struct backlight_ops atmel_lcdc_bl_ops = { -+ .update_status = atmel_bl_update_status, -+ .get_brightness = atmel_bl_get_brightness, -+}; -+ -+static void init_backlight(struct atmel_lcdfb_info *sinfo) -+{ -+ struct backlight_device *bl; -+ -+ sinfo->bl_power = FB_BLANK_UNBLANK; -+ -+ if (sinfo->backlight) -+ return; -+ -+ bl = backlight_device_register("backlight", &sinfo->pdev->dev, -+ sinfo, &atmel_lcdc_bl_ops); -+ if (IS_ERR(sinfo->backlight)) { -+ dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n", -+ PTR_ERR(bl)); -+ return; -+ } -+ sinfo->backlight = bl; -+ -+ bl->props.power = FB_BLANK_UNBLANK; -+ bl->props.fb_blank = FB_BLANK_UNBLANK; -+ bl->props.max_brightness = 0xff; -+ bl->props.brightness = atmel_bl_get_brightness(bl); -+} -+ -+static void exit_backlight(struct atmel_lcdfb_info *sinfo) -+{ -+ if (sinfo->backlight) -+ backlight_device_unregister(sinfo->backlight); -+} -+ -+#else -+ -+static void init_backlight(struct atmel_lcdfb_info *sinfo) -+{ -+ dev_warn(&sinfo->pdev->dev, "backlight control is not available\n"); -+} -+ -+static void exit_backlight(struct atmel_lcdfb_info *sinfo) -+{ -+} -+ -+#endif -+ -+static void init_contrast(struct atmel_lcdfb_info *sinfo) -+{ -+ /* have some default contrast/backlight settings */ -+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); -+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); -+ -+ if (sinfo->lcdcon_is_backlight) -+ init_backlight(sinfo); -+} -+ - - static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { - .type = FB_TYPE_PACKED_PIXELS, -@@ -370,10 +472,6 @@ - /* Disable all interrupts */ - lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); - -- /* Set contrast */ -- value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE; -- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value); -- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); - /* ...wait for DMA engine to become idle... */ - while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) - msleep(10); -@@ -577,6 +675,7 @@ - sinfo->default_monspecs = pdata_sinfo->default_monspecs; - sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control; - sinfo->guard_time = pdata_sinfo->guard_time; -+ sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight; - } else { - dev_err(dev, "cannot get default configuration\n"); - goto free_info; -@@ -670,6 +769,9 @@ - goto release_mem; - } - -+ /* Initialize PWM for contrast or backlight ("off") */ -+ init_contrast(sinfo); -+ - /* interrupt */ - ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info); - if (ret) { -@@ -721,6 +823,7 @@ - unregister_irqs: - free_irq(sinfo->irq_base, info); - unmap_mmio: -+ exit_backlight(sinfo); - iounmap(sinfo->mmio); - release_mem: - release_mem_region(info->fix.mmio_start, info->fix.mmio_len); -@@ -755,6 +858,7 @@ - if (!sinfo) - return 0; - -+ exit_backlight(sinfo); - if (sinfo->atmel_lcdfb_power_control) - sinfo->atmel_lcdfb_power_control(0); - unregister_framebuffer(info); -@@ -779,8 +883,45 @@ - return 0; - } - -+#ifdef CONFIG_PM -+ -+static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) -+{ -+ struct fb_info *info = platform_get_drvdata(pdev); -+ struct atmel_lcdfb_info *sinfo = info->par; -+ -+ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); -+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); -+ if (sinfo->atmel_lcdfb_power_control) -+ sinfo->atmel_lcdfb_power_control(0); -+ atmel_lcdfb_stop_clock(sinfo); -+ -+ return 0; -+} -+ -+static int atmel_lcdfb_resume(struct platform_device *pdev) -+{ -+ struct fb_info *info = platform_get_drvdata(pdev); -+ struct atmel_lcdfb_info *sinfo = info->par; -+ -+ atmel_lcdfb_start_clock(sinfo); -+ if (sinfo->atmel_lcdfb_power_control) -+ sinfo->atmel_lcdfb_power_control(1); -+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon); -+ -+ return 0; -+} -+ -+#else -+#define atmel_lcdfb_suspend NULL -+#define atmel_lcdfb_resume NULL -+#endif -+ -+ - static struct platform_driver atmel_lcdfb_driver = { - .remove = __exit_p(atmel_lcdfb_remove), -+ .suspend = atmel_lcdfb_suspend, -+ .resume = atmel_lcdfb_resume, - .driver = { - .name = "atmel_lcdfb", - .owner = THIS_MODULE, -diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig ---- linux-2.6.24/drivers/video/backlight/Kconfig 2008-03-01 22:02:14.000000000 +0200 -+++ linux-2.6/drivers/video/backlight/Kconfig 2008-02-25 22:42:48.000000000 +0200 -@@ -50,6 +50,19 @@ - To have support for your specific LCD panel you will have to - select the proper drivers which depend on this option. - -+config BACKLIGHT_ATMEL_LCDC -+ bool "Atmel LCDC Contrast-as-Backlight control" -+ depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL -+ default y if MACH_SAM9261EK || MACH_SAM9263EK -+ help -+ This provides a backlight control internal to the Atmel LCDC -+ driver. If the LCD "contrast control" on your board is wired -+ so it controls the backlight brightness, select this option to -+ export this as a PWM-based backlight control. -+ -+ If in doubt, it's safe to enable this option; it doesn't kick -+ in unless the board's description says it's wired that way. -+ - config BACKLIGHT_CORGI - tristate "Generic (aka Sharp Corgi) Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE -@@ -90,3 +103,11 @@ - help - If you have a Intel LE80578 (Carillo Ranch) say Y to enable the - backlight driver. -+ -+config BACKLIGHT_KB920x -+ tristate "KwikByte KB9202 Backlight Driver" -+ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200 -+ default y -+ help -+ If you have a KwikByte KB9202 board, say Y to enable the -+ backlight driver. -diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile ---- linux-2.6.24/drivers/video/backlight/Makefile 2008-03-01 22:02:14.000000000 +0200 -+++ linux-2.6/drivers/video/backlight/Makefile 2007-12-31 10:44:34.000000000 +0200 -@@ -9,3 +9,4 @@ - obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o - obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o - obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o -+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o -diff -urN -x CVS linux-2.6.24/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c ---- linux-2.6.24/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2007-12-31 10:44:34.000000000 +0200 -@@ -0,0 +1,164 @@ -+/* -+ * Backlight Driver for KB9202 -+ * -+ * Copyright (c) 2006 KwikByte -+ * -+ * Based on Sharp's Corgi Backlight Driver -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/spinlock.h> -+#include <linux/fb.h> -+#include <linux/backlight.h> -+ -+#include <asm/arch/gpio.h> -+ -+/* The backlight is on(1)/off(0) */ -+#define KB9202_DEFAULT_INTENSITY 1 -+#define KB9202_MAX_INTENSITY 1 -+ -+static int kb9202bl_suspended; -+static int current_intensity = 0; -+static DEFINE_SPINLOCK(bl_lock); -+ -+static int kb9202bl_set_intensity(struct backlight_device *bd) -+{ -+ unsigned long flags; -+ int intensity = bd->props.brightness; -+ -+ if (bd->props.power != FB_BLANK_UNBLANK) -+ intensity = 0; -+ if (bd->props.fb_blank != FB_BLANK_UNBLANK) -+ intensity = 0; -+ if (kb9202bl_suspended) -+ intensity = 0; -+ -+ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK)) -+ intensity = 1; -+ -+ spin_lock_irqsave(&bl_lock, flags); -+ if (intensity) -+ gpio_set_value(AT91_PIN_PC23, 1); -+ else -+ gpio_set_value(AT91_PIN_PC23, 0); -+ spin_unlock_irqrestore(&bl_lock, flags); -+ -+ current_intensity = intensity; -+ -+ return 0; -+} -+ -+static int kb9202bl_get_intensity(struct backlight_device *bd) -+{ -+ return current_intensity; -+} -+ -+static struct backlight_ops kb9202bl_ops = { -+ .get_brightness = kb9202bl_get_intensity, -+ .update_status = kb9202bl_set_intensity, -+}; -+ -+static int __init kb9202bl_probe(struct platform_device *pdev) -+{ -+ struct backlight_device *bd; -+ -+ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops); -+ if (IS_ERR(bd)) -+ return PTR_ERR(bd); -+ -+ platform_set_drvdata(pdev, bd); -+ -+ bd->props.max_brightness = KB9202_MAX_INTENSITY; -+ bd->props.brightness = KB9202_DEFAULT_INTENSITY; -+ (void) kb9202bl_set_intensity(bd); -+ -+ return 0; -+} -+ -+static int kb9202bl_remove(struct platform_device *pdev) -+{ -+ struct backlight_device *bd = platform_get_drvdata(pdev); -+ -+ bd->props.brightness = 0; -+ bd->props.power = 0; -+ (void) kb9202bl_set_intensity(bd); -+ -+ backlight_device_unregister(bd); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int kb9202bl_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct backlight_device *bd = platform_get_drvdata(pdev); -+ -+ kb9202bl_suspended = 1; -+ (void) kb9202bl_set_intensity(bd); -+ return 0; -+} -+ -+static int kb9202bl_resume(struct platform_device *pdev) -+{ -+ struct backlight_device *bd = platform_get_drvdata(pdev); -+ -+ kb9202bl_suspended = 0; -+ (void) kb9202bl_set_intensity(bd); -+ return 0; -+} -+#else -+#define kb9202bl_suspend NULL -+#define kb9202bl_resume NULL -+#endif -+ -+static struct platform_driver kb9202bl_driver = { -+ .probe = kb9202bl_probe, -+ .remove = kb9202bl_remove, -+ .suspend = kb9202bl_suspend, -+ .resume = kb9202bl_resume, -+ .driver = { -+ .name = "kb9202-bl", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_device *kb9202bl_device; -+ -+static int __init kb9202bl_init(void) -+{ -+ int ret; -+ -+ ret = platform_driver_register(&kb9202bl_driver); -+ if (!ret) { -+ kb9202bl_device = platform_device_alloc("kb9202-bl", -1); -+ if (!kb9202bl_device) -+ return -ENOMEM; -+ -+ ret = platform_device_add(kb9202bl_device); -+ if (ret) { -+ platform_device_put(kb9202bl_device); -+ platform_driver_unregister(&kb9202bl_driver); -+ } -+ } -+ return ret; -+} -+ -+static void __exit kb9202bl_exit(void) -+{ -+ platform_device_unregister(kb9202bl_device); -+ platform_driver_unregister(&kb9202bl_driver); -+} -+ -+module_init(kb9202bl_init); -+module_exit(kb9202bl_exit); -+ -+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>"); -+MODULE_DESCRIPTION("KB9202 Backlight Driver"); -+MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.24/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c ---- linux-2.6.24/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/video/s1d15605fb.c 2007-12-31 10:44:34.000000000 +0200 -@@ -0,0 +1,658 @@ -+/* -+ * drivers/video/s1d15605.c -+ * -+ * Adapted from several sources including: -+ * 1) Driver for AT91 LCD Controller -+ * Copyright (C) 2006 Atmel -+ * -+ * 2) Copyright (C) 2005 S. Kevin Hester -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD -+ * display. This display uses a clone of the common Epson SED 1531 display -+ * controller. -+ * -+ * I've heavily borrowed code from the vfb.c driver. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifdef DEBUG -+#define MSG(string, args...) printk("s1d15605fb:" string, ##args) -+#else -+#define MSG(string, args...) -+#endif -+ -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/dma-mapping.h> -+#include <linux/interrupt.h> -+#include <linux/clk.h> -+#include <linux/fb.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+ -+#include <asm/uaccess.h> -+ -+#include <asm/arch/board.h> -+#include <asm/arch/gpio.h> -+ -+#ifdef CONFIG_PMAC_BACKLIGHT -+#include <asm/backlight.h> -+#endif -+ -+#define VIDEOWIDTH 128 -+#define VIDEOHEIGHT 64 -+#define VIDEODEPTH 1 /* bits/pixel */ -+#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8) -+ -+/* The number of bytes that actually go to the device */ -+#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT) -+#define VIDEOMEMSIZE PAGE_SIZE -+ -+static struct fb_var_screeninfo s1d15605_default __initdata = { -+ .xres = VIDEOWIDTH, -+ .yres = VIDEOHEIGHT, -+ .xres_virtual = VIDEOWIDTH, -+ .yres_virtual = VIDEOHEIGHT, -+ .bits_per_pixel = VIDEODEPTH, -+ .red = { 0, 1, 0 }, -+ .green = { 0, 1, 0 }, -+ .blue = { 0, 1, 0 }, -+ .activate = FB_ACTIVATE_NOW, -+ .pixclock = 20000, -+ .vmode = FB_VMODE_NONINTERLACED, -+}; -+ -+static struct fb_fix_screeninfo s1d15605_fix __initdata = { -+ .id = "s1d15605", -+ .type = FB_TYPE_PACKED_PIXELS, -+ .visual = FB_VISUAL_MONO10, -+ .xpanstep = 0, -+ .ypanstep = 0, -+ .ywrapstep = 0, -+ .accel = FB_ACCEL_NONE, -+}; -+ -+struct s1d15605fb_info { -+ struct fb_info *info; -+ char *mmio; -+ unsigned long reset_pin; -+ struct platform_device *pdev; -+}; -+ -+/* -+ * LCD device interface -+ */ -+#define RESET_DISPLAY 0xE2 -+#define LCD_BIAS_1_9 0xA2 -+#define ADC_SELECT_REVERSE 0xA1 -+#define COMMON_OUTPUT_NORMAL 0xC0 -+#define V5_RESISTOR_RATIO 0x26 -+#define ELECTRONIC_VOLUME_SET 0x81 -+#define ELECTRONIC_VOLUME_INIT 0x20 -+#define POWER_CONTROL_SET 0x28 -+#define VOLTAGE_REGULATOR 0x02 -+#define VOLTAGE_FOLLOWER 0x01 -+#define BOOSTER_CIRCUIT 0x04 -+#define DISPLAY_ON 0xAF -+#define START_LINE_SET 0x40 -+#define PAGE_ADDRESS_SET 0xB0 -+#define COLUMN_ADDRESS_HIGH 0x10 -+#define COLUMN_ADDRESS_LOW 0x00 -+#define RESISTOR_RATIO_START 0x20 -+ -+#define NUM_OF_PAGES 8 -+#define NUM_OF_COLUMNS 128 -+ -+#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio) -+#define READ_COMMAND __raw_readb((sinfo)->mmio) -+#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000)) -+#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000)) -+ -+ -+/* -+ * s1d15605fb_resize_framebuffer -+ * -+ * Free allocated space if different. Allocate on new of changed. -+ * Returns -ENOMEM if the new framebuffer can not be allocated, -+ * zero on success. -+ */ -+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo) -+{ -+ struct fb_info *info = sinfo->info; -+ struct fb_fix_screeninfo *fix = &info->fix; -+ struct fb_var_screeninfo *var = &info->var; -+ unsigned int new_size; -+ void *new_vaddr; -+ -+ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8); -+ -+ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__, -+ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size); -+ -+ if (new_size == fix->smem_len) -+ return 0; -+ -+ if (fix->smem_len) { -+ kfree(info->screen_base); -+ } -+ -+ new_vaddr = kmalloc(new_size, GFP_KERNEL); -+ -+ if (!new_vaddr) { -+ fix->smem_len = 0; -+ return -ENOMEM; -+ } -+ -+ info->screen_base = new_vaddr; -+ fix->smem_start = (unsigned)new_vaddr; -+ fix->smem_len = new_size; -+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8; -+ -+ dev_info(info->device, -+ "%luKiB frame buffer at %08lx (mapped at %p)\n", -+ (unsigned long)info->fix.smem_len / 1024, -+ (unsigned long)info->fix.smem_start, -+ info->screen_base); -+ -+ return 0; -+} -+ -+ -+/* -+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to -+ * bottom) each page seems to be eight pixels high, where these eight pixels are -+ * one byte -+ */ -+static void s1d15605_update(struct fb_info *info) -+{ -+ struct s1d15605fb_info *sinfo = info->par; -+ int page, i, row, colmask; -+ u8 retVal, *rowPtr; -+ -+ WRITE_COMMAND(START_LINE_SET); -+ for (page = 0; page < NUM_OF_PAGES; ++page) { -+ WRITE_COMMAND(PAGE_ADDRESS_SET + page); -+ WRITE_COMMAND(COLUMN_ADDRESS_HIGH); -+ WRITE_COMMAND(COLUMN_ADDRESS_LOW); -+ -+ for (i = 0; i < NUM_OF_COLUMNS; ++i) -+ { -+ /* point of opportunity: optimization */ -+ colmask = (1 << (i & 0x7)); -+ rowPtr = (u8*)(info->screen_base); -+ rowPtr += (VIDEOWIDTH_BYTES * 8 * page); -+ rowPtr += (i >> 3); -+ retVal = 0; -+ for (row = 0; row < 8; ++row) -+ { -+ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0); -+ rowPtr += VIDEOWIDTH_BYTES; -+ } -+ WRITE_DATA(retVal); -+ } -+ } -+ -+ WRITE_COMMAND(DISPLAY_ON); -+} -+ -+ -+/* -+ * Setting the video mode has been split into two parts. -+ * First part, xxxfb_check_var, must not write anything -+ * to hardware, it should only verify and adjust var. -+ * This means it doesn't alter par but it does use hardware -+ * data from it to check this var. -+ */ -+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info) -+{ -+ /* -+ * Some very basic checks -+ */ -+ if (!var->xres) -+ var->xres = 1; -+ if (!var->yres) -+ var->yres = 1; -+ if (var->xres > var->xres_virtual) -+ var->xres_virtual = var->xres; -+ if (var->yres > var->yres_virtual) -+ var->yres_virtual = var->yres; -+ -+ if(var->bits_per_pixel > VIDEODEPTH) -+ return -EINVAL; -+ -+ /* -+ * Memory limit -+ */ -+ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) > -+ ACTUALVIDEOMEMSIZE) -+ return -ENOMEM; -+ -+ /* -+ * Now that we checked it we alter var. The reason being is that the video -+ * mode passed in might not work but slight changes to it might make it -+ * work. This way we let the user know what is acceptable. -+ */ -+ switch (var->bits_per_pixel) { -+ case 1: -+ var->red.offset = var->green.offset = var->blue.offset = 0; -+ var->red.length = var->green.length = var->blue.length -+ = var->bits_per_pixel; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ var->xoffset = var->yoffset = 0; -+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = -+ var->transp.msb_right = 0; -+ -+ return 0; -+} -+ -+ -+/* -+ * This routine actually sets the video mode. It's in here where we -+ * the hardware state info->par and fix which can be affected by the -+ * change in par. For this driver it doesn't do much. -+ */ -+static int s1d15605_set_par(struct fb_info *info) -+{ -+ int ret; -+ -+ MSG("%s:\n", __func__); -+ MSG(" * resolution: %ux%u (%ux%u virtual)\n", -+ info->var.xres, info->var.yres, -+ info->var.xres_virtual, info->var.yres_virtual); -+ -+ ret = s1d15605fb_resize_framebuffer(info->par); -+ -+ info->fix.visual = FB_VISUAL_MONO10; -+ return ret; -+} -+ -+ -+/* -+ * Set a single color register. The values supplied are already -+ * rounded down to the hardware's capabilities (according to the -+ * entries in the var structure). Return != 0 for invalid regno. -+ */ -+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue, -+ u_int transp, struct fb_info *info) -+{ -+ if (regno > 1) /* no. of hw registers - we only do mono now */ -+ return 1; -+ -+ return 0; -+} -+ -+ -+/* -+ * Currently, the routine will simply shut-off the backlight and prevent -+ * updates/refreshes. Modify according to application. -+ * -+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off -+ */ -+static int s1d15605_blank(int blank, struct fb_info *info) -+{ -+#ifdef CONFIG_PMAC_BACKLIGHT -+ if (blank) -+ pmac_backlight->props.power = FB_BLANK_POWERDOWN; -+ else -+ pmac_backlight->props.power = FB_BLANK_UNBLANK; -+ backlight_update_status(pmac_backlight); -+#endif -+ return 1; -+} -+ -+ -+/* -+ * Pan or Wrap the Display -+ * -+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag -+ */ -+/* -+static int s1d15605_pan_display(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ if (var->vmode & FB_VMODE_YWRAP) { -+ if (var->yoffset < 0 -+ || var->yoffset >= info->var.yres_virtual -+ || var->xoffset) -+ return -EINVAL; -+ } else { -+ if (var->xoffset + var->xres > info->var.xres_virtual || -+ var->yoffset + var->yres > info->var.yres_virtual) -+ return -EINVAL; -+ } -+ info->var.xoffset = var->xoffset; -+ info->var.yoffset = var->yoffset; -+ if (var->vmode & FB_VMODE_YWRAP) -+ info->var.vmode |= FB_VMODE_YWRAP; -+ else -+ info->var.vmode &= ~FB_VMODE_YWRAP; -+ return 0; -+} -+*/ -+ -+ -+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region) -+{ -+ cfb_copyarea(info, region); -+ s1d15605_update(info); -+} -+ -+ -+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect) -+{ -+ cfb_fillrect(info, rect); -+ s1d15605_update(info); -+} -+ -+ -+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image) -+{ -+ cfb_imageblit(p, image); -+ s1d15605_update(p); -+} -+ -+ -+/* -+ * Write the users data to our framebuffer, and then trigger a psuedo DMA -+ */ -+static ssize_t s1d15605_write(struct file *file, const char *buf, -+ size_t count, loff_t *ppos) -+{ -+ unsigned long p = *ppos; -+ struct inode *inode = file->f_dentry->d_inode; -+ int fbidx = iminor(inode); -+ struct fb_info *info = registered_fb[fbidx]; -+ int err; -+ -+ if (p > info->fix.smem_len) -+ return -ENOSPC; -+ if (count >= info->fix.smem_len) -+ count = info->fix.smem_len; -+ err = 0; -+ if (count + p > info->fix.smem_len) { -+ count = info->fix.smem_len - p; -+ err = -ENOSPC; -+ } -+ if (count) { -+ char *base_addr; -+ -+ base_addr = info->screen_base; -+ count -= copy_from_user(base_addr+p, buf, count); -+ *ppos += count; -+ err = -EFAULT; -+ } -+ -+ s1d15605_update(info); -+ -+ if (count) -+ return count; -+ -+ return err; -+} -+ -+#ifdef USE_PRIVATE_VMA_FXS -+static void s1d15605_vma_open(struct vm_area_struct *vma) -+{ -+ // FIXME - store stats in the device data via vm_private_data -+} -+ -+ -+static void s1d15605_vma_close(struct vm_area_struct *vma) -+{ -+ // FIXME - store stats in the device data via vm_private_data -+} -+ -+ -+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma, -+ unsigned long address, int *type) -+{ -+ struct page *page; -+ struct fb_info *info = vma->vm_private_data; -+ -+ page = virt_to_page(info->screen_base); -+ get_page(page); -+ -+ // FIXME - now someone has a link to our page, start periodically blitting -+ // latest updates to the actual device. -+ -+ return page; -+} -+ -+ -+static struct vm_operations_struct s1d15605_vm_ops = { -+ .open = s1d15605_vma_open, -+ .close = s1d15605_vma_close, -+ .nopage = s1d15605_vma_nopage -+}; -+ -+ -+/* We don't do much here - because we have special vm_ops */ -+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma) -+{ -+ vma->vm_ops = &s1d15605_vm_ops; -+ vma->vm_flags |= VM_RESERVED; -+ vma->vm_private_data = info; -+ s1d15605_vma_open(vma); -+ -+ return 0; -+} -+#endif /* USE_PRIVATE_VMA_FXS */ -+ -+ -+static struct fb_ops s1d15605fb_ops = { -+ .owner = THIS_MODULE, -+ .fb_check_var = s1d15605_check_var, -+ .fb_set_par = s1d15605_set_par, -+ .fb_setcolreg = s1d15605_setcolreg, -+ .fb_blank = s1d15605_blank, -+// .fb_pan_display = s1d15605_pan_display, -+ .fb_fillrect = s1d15605_fillrect, -+ .fb_copyarea = s1d15605_copyarea, -+ .fb_imageblit = s1d15605_imageblit, -+ .fb_write = s1d15605_write, -+#ifdef USE_PRIVATE_VMA_FXS -+ .fb_mmap = s1d15605_mmap, -+#endif -+}; -+ -+ -+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) { -+ -+ char value; -+ -+ /* release the reset line by reading the device - proto hardware */ -+ value = READ_COMMAND; -+ value = READ_COMMAND; -+ -+#ifdef CONFIG_MACH_KB9200 -+ /* new boards have dedicated reset line */ -+ gpio_set_value(sinfo->reset_pin, 1); -+#endif -+ -+ /* initialize the device within 5ms */ -+ WRITE_COMMAND(RESET_DISPLAY); -+ WRITE_COMMAND(LCD_BIAS_1_9); -+ WRITE_COMMAND(ADC_SELECT_REVERSE); -+ WRITE_COMMAND(COMMON_OUTPUT_NORMAL); -+ WRITE_COMMAND(V5_RESISTOR_RATIO); -+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET); -+ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT); -+ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT); -+ WRITE_COMMAND(DISPLAY_ON); -+ -+ WRITE_COMMAND(RESISTOR_RATIO_START + 4); -+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET); -+ WRITE_COMMAND(0x33); -+} -+ -+ -+static int __init s1d15605fb_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct fb_info *info; -+ struct s1d15605fb_info *sinfo; -+ int ret; -+ -+ MSG("%s\n", __func__); -+ -+ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) { -+ dev_err(dev, "Cannot allocate framebuffer struct\n"); -+ return -ENOMEM; -+ } -+ -+ sinfo = info->par; -+ sinfo->info = info; -+ sinfo->pdev = pdev; -+ -+ if (pdev->num_resources < 2) { -+ dev_err(dev, "Resources unusable\n"); -+ ret = -ENODEV; -+ goto free_info; -+ } -+ -+ info->fbops = &s1d15605fb_ops; -+ strcpy(info->fix.id, pdev->name); -+ -+ info->fix.mmio_start = pdev->resource[0].start; -+ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1; -+ sinfo->reset_pin = pdev->resource[1].start; -+ -+ ret = s1d15605fb_resize_framebuffer(sinfo); -+ if (ret < 0) { -+ dev_err(dev, "Cannot resize framebuffer: %d\n", ret); -+ goto free_fb; -+ } -+ -+ if (!request_mem_region(info->fix.mmio_start, -+ info->fix.mmio_len, pdev->name)) { -+ ret = -EBUSY; -+ goto free_fb; -+ } -+ -+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); -+ if (!sinfo->mmio) { -+ dev_err(dev, "Cannot map LCD memory region\n"); -+ goto release_mem; -+ } -+ -+ s1d15605_device_init(sinfo); -+ -+ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1); -+ -+ if (!ret || (ret == 4)) -+ info->var = s1d15605_default; -+ -+ info->fix = s1d15605_fix; -+ info->flags = FBINFO_FLAG_DEFAULT | -+/* FBINFO_HWACCEL_YPAN | */ -+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; -+ -+ ret = register_framebuffer(info); -+ if (ret < 0) { -+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret); -+ goto unmap_mmio; -+ } -+ -+ dev_set_drvdata(dev, info); -+ -+ memset(info->screen_base, 0, info->fix.smem_len); -+ info->var.activate |= FB_ACTIVATE_NOW; -+ ret = fb_set_var(info, &info->var); -+ if (ret) { -+ dev_warn(dev, "Unable to set display parameters\n"); -+ } -+ -+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW); -+ -+ dev_dbg(dev, "%s SUCCESS\n", __func__); -+ -+ dev_info(dev, "Driver $Revision: 1.1 $\n"); -+ -+ return 0; -+ -+unmap_mmio: -+ iounmap(sinfo->mmio); -+release_mem: -+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); -+free_fb: -+ kfree(info->screen_base); -+ -+free_info: -+ framebuffer_release(info); -+ -+ dev_dbg(dev, "%s FAILED\n", __func__); -+ return ret; -+} -+ -+ -+static int __exit s1d15605fb_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct fb_info *info = dev_get_drvdata(dev); -+ struct s1d15605fb_info *sinfo = info->par; -+ -+ if (!sinfo) -+ return 0; -+ -+ unregister_framebuffer(info); -+ -+ iounmap(sinfo->mmio); -+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); -+ -+ kfree(info->screen_base); -+ -+ dev_set_drvdata(dev, NULL); -+ framebuffer_release(info); -+ return 0; -+} -+ -+ -+static struct platform_driver s1d15605fb_driver = { -+ .remove = __exit_p(s1d15605fb_remove), -+ .driver = { -+ .name = "s1d15605fb", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+ -+static int __init s1d15605fb_init(void) -+{ -+ return platform_driver_probe(&s1d15605fb_driver, s1d15605fb_probe); -+} -+ -+ -+static void __exit s1d15605fb_exit(void) -+{ -+ platform_driver_unregister(&s1d15605fb_driver); -+} -+ -+ -+module_init(s1d15605fb_init); -+module_exit(s1d15605fb_exit); -+ -+ -+MODULE_AUTHOR("KwikByte"); -+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver"); -+MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.24/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig ---- linux-2.6.24/drivers/watchdog/Kconfig 2008-03-01 22:02:14.000000000 +0200 -+++ linux-2.6/drivers/watchdog/Kconfig 2007-12-31 10:44:10.000000000 +0200 -@@ -66,6 +66,14 @@ - Watchdog timer embedded into AT91RM9200 chips. This will reboot your - system when the timeout is reached. - -+config AT91SAM9_WATCHDOG -+ tristate "AT91SAM9 watchdog" -+ depends on ARCH_AT91 && !ARCH_AT91RM9200 -+ select WATCHDOG_NOWAYOUT -+ help -+ Watchdog timer embedded into AT91SAM9 chips. This will reboot your -+ system when the timeout is reached. -+ - config 21285_WATCHDOG - tristate "DC21285 watchdog" - depends on FOOTBRIDGE -diff -urN -x CVS linux-2.6.24/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile ---- linux-2.6.24/drivers/watchdog/Makefile 2008-03-01 22:02:14.000000000 +0200 -+++ linux-2.6/drivers/watchdog/Makefile 2007-12-31 10:44:20.000000000 +0200 -@@ -26,6 +26,7 @@ - - # ARM Architecture - obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o -+obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o - obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o - obj-$(CONFIG_21285_WATCHDOG) += wdt285.o - obj-$(CONFIG_977_WATCHDOG) += wdt977.o -diff -urN -x CVS linux-2.6.24/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c ---- linux-2.6.24/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2007-12-31 15:18:43.000000000 +0200 -@@ -0,0 +1,258 @@ -+/* -+ * Watchdog driver for Atmel AT91SAM9x processors. -+ * -+ * Copyright (C) 2007 Renaud CERRATO r.cerrato@til-technologies.fr -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * The Watchdog Timer Mode Register can be only written to once. If the -+ * timeout need to be set from Linux, be sure that the bootstrap or the -+ * bootloader doesn't write to this register. -+ */ -+ -+#include <linux/errno.h> -+#include <linux/fs.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/miscdevice.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/platform_device.h> -+#include <linux/types.h> -+#include <linux/watchdog.h> -+#include <linux/bitops.h> -+#include <linux/uaccess.h> -+ -+#include <asm/arch/at91_wdt.h> -+ -+ -+#define WDT_MAX_TIME 16 /* seconds */ -+ -+static int wdt_timeout = -1; /* invalid */ -+ -+module_param(wdt_timeout, int, 0); -+MODULE_PARM_DESC(wdt_timeout, "Watchdog time in seconds. (default = disabled)"); -+ -+ -+static unsigned long at91wdt_busy; -+ -+/* ......................................................................... */ -+ -+/* -+ * Reload the watchdog timer. (ie, pat the watchdog) -+ */ -+static void inline at91_wdt_reload(void) -+{ -+ at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); -+} -+ -+/* ......................................................................... */ -+ -+/* -+ * Watchdog device is opened, and watchdog starts running. -+ */ -+static int at91_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (test_and_set_bit(0, &at91wdt_busy)) -+ return -EBUSY; -+ -+ return nonseekable_open(inode, file); -+} -+ -+/* -+ * Close the watchdog device. -+ */ -+static int at91_wdt_close(struct inode *inode, struct file *file) -+{ -+ clear_bit(0, &at91wdt_busy); -+ return 0; -+} -+ -+/* -+ * Change the watchdog time interval. -+ */ -+static int at91_wdt_settimeout(int new_time) -+{ -+ unsigned int reg, mr; -+ /* -+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz -+ * -+ * Since WDV is a 12-bit counter, the maximum period is -+ * 4096 / 256 = 16 seconds. -+ */ -+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) -+ return -EINVAL; -+ -+ wdt_timeout = new_time; -+ -+ /* Program the Watchdog */ -+ reg = AT91_WDT_WDRSTEN /* causes watchdog reset */ -+ | AT91_WDT_WDRPROC /* causes processor reset */ -+ | AT91_WDT_WDDBGHLT /* disabled in debug mode */ -+ | AT91_WDT_WDD /* restart at any time */ -+ | (((wdt_timeout * 256) - 1) & AT91_WDT_WDV); /* timer value */ -+ at91_sys_write(AT91_WDT_MR, reg); -+ -+ /* Check if watchdog could be programmed */ -+ mr = at91_sys_read(AT91_WDT_MR); -+ if (mr != reg) { -+ printk(KERN_ERR "at91sam9_wdt: Watchdog register already programmed.\n"); -+ return -EIO; -+ } -+ -+ at91_wdt_reload(); -+ -+ printk(KERN_INFO "AT91SAM9 Watchdog enabled (%d seconds, nowayout)\n", wdt_timeout); -+ return 0; -+} -+ -+static struct watchdog_info at91_wdt_info = { -+ .identity = "at91sam9 watchdog", -+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -+}; -+ -+/* -+ * Handle commands from user-space. -+ */ -+static int at91_wdt_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ void __user *argp = (void __user *)arg; -+ int __user *p = argp; -+ int new_value, err; -+ -+ switch (cmd) { -+ case WDIOC_KEEPALIVE: -+ at91_wdt_reload(); /* pat the watchdog */ -+ return 0; -+ -+ case WDIOC_GETSUPPORT: -+ return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; -+ -+ case WDIOC_SETTIMEOUT: -+ if (get_user(new_value, p)) -+ return -EFAULT; -+ -+ err = at91_wdt_settimeout(new_value); -+ if (err) -+ return err; -+ -+ return put_user(wdt_timeout, p); /* return current value */ -+ -+ case WDIOC_GETTIMEOUT: -+ return put_user(wdt_timeout, p); -+ -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ return put_user(0, p); -+ } -+ return -ENOTTY; -+} -+ -+/* -+ * Pat the watchdog whenever device is written to. -+ */ -+static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) -+{ -+ at91_wdt_reload(); /* pat the watchdog */ -+ return len; -+} -+ -+/* ......................................................................... */ -+ -+static const struct file_operations at91wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .ioctl = at91_wdt_ioctl, -+ .open = at91_wdt_open, -+ .release = at91_wdt_close, -+ .write = at91_wdt_write, -+}; -+ -+static struct miscdevice at91wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &at91wdt_fops, -+}; -+ -+static int __init at91wdt_probe(struct platform_device *pdev) -+{ -+ int res; -+ -+ if (at91wdt_miscdev.parent) -+ return -EBUSY; -+ at91wdt_miscdev.parent = &pdev->dev; -+ -+ res = misc_register(&at91wdt_miscdev); -+ if (res) -+ return res; -+ -+ /* Set watchdog */ -+ if (at91_wdt_settimeout(wdt_timeout) == -EINVAL) { -+ pr_info("at91sam9_wdt: invalid timeout (must be between 1 and %d)\n", WDT_MAX_TIME); -+ return 0; -+ } -+ -+ return 0; -+} -+ -+static int __exit at91wdt_remove(struct platform_device *pdev) -+{ -+ int res; -+ -+ res = misc_deregister(&at91wdt_miscdev); -+ if (!res) -+ at91wdt_miscdev.parent = NULL; -+ -+ return res; -+} -+ -+#ifdef CONFIG_PM -+ -+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message) -+{ -+ return 0; -+} -+ -+static int at91wdt_resume(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+#else -+#define at91wdt_suspend NULL -+#define at91wdt_resume NULL -+#endif -+ -+static struct platform_driver at91wdt_driver = { -+ .remove = __exit_p(at91wdt_remove), -+ .suspend = at91wdt_suspend, -+ .resume = at91wdt_resume, -+ .driver = { -+ .name = "at91_wdt", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init at91sam_wdt_init(void) -+{ -+ return platform_driver_probe(&at91wdt_driver, at91wdt_probe); -+} -+ -+static void __exit at91sam_wdt_exit(void) -+{ -+ platform_driver_unregister(&at91wdt_driver); -+} -+ -+module_init(at91sam_wdt_init); -+module_exit(at91sam_wdt_exit); -+ -+MODULE_AUTHOR("Renaud CERRATO"); -+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-02-25 21:15:20.000000000 +0200 -@@ -13,26 +13,26 @@ - #ifndef AT91_ECC_H - #define AT91_ECC_H - --#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ -+#define AT91_ECC_CR (0x00) /* Control register */ - #define AT91_ECC_RST (1 << 0) /* Reset parity */ - --#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ -+#define AT91_ECC_MR (0x04) /* Mode register */ - #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ - #define AT91_ECC_PAGESIZE_528 (0) - #define AT91_ECC_PAGESIZE_1056 (1) - #define AT91_ECC_PAGESIZE_2112 (2) - #define AT91_ECC_PAGESIZE_4224 (3) - --#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ -+#define AT91_ECC_SR (0x08) /* Status register */ - #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ - #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ - #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ - --#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ -+#define AT91_ECC_PR (0x0c) /* Parity register */ - #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ - #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ - --#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ -+#define AT91_ECC_NPR (0x10) /* NParity register */ - #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ - - #endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h 1970-01-01 02:00:00.000000000 +0200 -@@ -1,148 +0,0 @@ --/* -- * include/asm-arm/arch-at91/at91_lcdc.h -- * -- * LCD Controller (LCDC). -- * Based on AT91SAM9261 datasheet revision E. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- */ -- --#ifndef AT91_LCDC_H --#define AT91_LCDC_H -- --#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */ --#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */ --#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */ --#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */ --#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */ --#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */ -- --#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */ --#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */ --#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */ -- --#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */ --#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */ --#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */ --#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */ -- --#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */ --#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */ --#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */ --#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */ -- --#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */ --#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */ --#define AT91_LCDC_DISTYPE_STNMONO (0 << 0) --#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0) --#define AT91_LCDC_DISTYPE_TFT (2 << 0) --#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */ --#define AT91_LCDC_SCANMOD_SINGLE (0 << 2) --#define AT91_LCDC_SCANMOD_DUAL (1 << 2) --#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */ --#define AT91_LCDC_IFWIDTH_4 (0 << 3) --#define AT91_LCDC_IFWIDTH_8 (1 << 3) --#define AT91_LCDC_IFWIDTH_16 (2 << 3) --#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */ --#define AT91_LCDC_PIXELSIZE_1 (0 << 5) --#define AT91_LCDC_PIXELSIZE_2 (1 << 5) --#define AT91_LCDC_PIXELSIZE_4 (2 << 5) --#define AT91_LCDC_PIXELSIZE_8 (3 << 5) --#define AT91_LCDC_PIXELSIZE_16 (4 << 5) --#define AT91_LCDC_PIXELSIZE_24 (5 << 5) --#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */ --#define AT91_LCDC_INVVD_NORMAL (0 << 8) --#define AT91_LCDC_INVVD_INVERTED (1 << 8) --#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */ --#define AT91_LCDC_INVFRAME_NORMAL (0 << 9) --#define AT91_LCDC_INVFRAME_INVERTED (1 << 9) --#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */ --#define AT91_LCDC_INVLINE_NORMAL (0 << 10) --#define AT91_LCDC_INVLINE_INVERTED (1 << 10) --#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */ --#define AT91_LCDC_INVCLK_NORMAL (0 << 11) --#define AT91_LCDC_INVCLK_INVERTED (1 << 11) --#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */ --#define AT91_LCDC_INVDVAL_NORMAL (0 << 12) --#define AT91_LCDC_INVDVAL_INVERTED (1 << 12) --#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */ --#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) --#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) --#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */ --#define AT91_LCDC_MEMOR_BIG (0 << 31) --#define AT91_LCDC_MEMOR_LITTLE (1 << 31) -- --#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */ --#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */ --#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */ --#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */ --#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */ -- --#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */ --#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */ --#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */ --#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */ -- --#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */ --#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */ --#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */ -- --#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */ --#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */ -- --#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */ --#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */ --#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */ --#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */ --#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */ --#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */ --#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */ --#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */ --#define AT91_LCDC_DP1_2_VAL (0xff) --#define AT91_LCDC_DP4_7_VAL (0xfffffff) --#define AT91_LCDC_DP3_5_VAL (0xfffff) --#define AT91_LCDC_DP2_3_VAL (0xfff) --#define AT91_LCDC_DP5_7_VAL (0xfffffff) --#define AT91_LCDC_DP3_4_VAL (0xffff) --#define AT91_LCDC_DP4_5_VAL (0xfffff) --#define AT91_LCDC_DP6_7_VAL (0xfffffff) -- --#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */ --#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */ --#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */ --#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */ -- --#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */ --#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */ --#define AT91_LCDC_PS_DIV1 (0 << 0) --#define AT91_LCDC_PS_DIV2 (1 << 0) --#define AT91_LCDC_PS_DIV4 (2 << 0) --#define AT91_LCDC_PS_DIV8 (3 << 0) --#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */ --#define AT91_LCDC_POL_NEGATIVE (0 << 2) --#define AT91_LCDC_POL_POSITIVE (1 << 2) --#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */ --#define AT91_LCDC_ENA_PWMDISABLE (0 << 3) --#define AT91_LCDC_ENA_PWMENABLE (1 << 3) -- --#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */ --#define AT91_LCDC_CVAL (0xff) /* PWM compare value */ -- --#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */ --#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */ --#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */ --#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */ --#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */ --#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */ --#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */ --#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */ --#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */ --#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */ --#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */ -- --#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */ -- --#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h linux-2.6/include/asm-arm/arch-at91/at91_mci.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_mci.h 2008-01-16 21:24:29.000000000 +0200 -@@ -89,7 +89,7 @@ - #define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ - #define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ - #define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ --#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */ -+#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ - #define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ - #define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ - #define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-03-01 22:06:19.000000000 +0200 -@@ -25,6 +25,7 @@ - #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ - #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ - #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ - #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ - #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ - #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -@@ -37,7 +38,9 @@ - #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ - #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ - --#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ -+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ -+ -+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ - #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ - #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ - #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ -@@ -52,6 +55,10 @@ - #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ - #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ - #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ -+#define AT91_PMC_USBDIV_1 (0 << 28) -+#define AT91_PMC_USBDIV_2 (1 << 28) -+#define AT91_PMC_USBDIV_4 (2 << 28) - #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ - - #define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ -@@ -69,10 +76,13 @@ - #define AT91_PMC_PRES_32 (5 << 2) - #define AT91_PMC_PRES_64 (6 << 2) - #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ --#define AT91_PMC_MDIV_1 (0 << 8) --#define AT91_PMC_MDIV_2 (1 << 8) --#define AT91_PMC_MDIV_3 (2 << 8) --#define AT91_PMC_MDIV_4 (3 << 8) -+#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ -+#define AT91RM9200_PMC_MDIV_2 (1 << 8) -+#define AT91RM9200_PMC_MDIV_3 (2 << 8) -+#define AT91RM9200_PMC_MDIV_4 (3 << 8) -+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ -+#define AT91SAM9_PMC_MDIV_2 (1 << 8) -+#define AT91SAM9_PMC_MDIV_4 (2 << 8) - - #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ - -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-02-18 18:50:29.000000000 +0200 -@@ -13,19 +13,19 @@ - #ifndef AT91_RTT_H - #define AT91_RTT_H - --#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */ -+#define AT91_RTT_MR (0x00) /* Real-time Mode Register */ - #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ - #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ - #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ - #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ - --#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */ -+#define AT91_RTT_AR (0x04) /* Real-time Alarm Register */ - #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ - --#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */ -+#define AT91_RTT_VR (0x08) /* Real-time Value Register */ - #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ - --#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */ -+#define AT91_RTT_SR (0x0c) /* Real-time Status Register */ - #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ - #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ - -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-02-24 23:02:31.000000000 +0200 -@@ -24,10 +24,12 @@ - #define AT91_SHDW_WKMODE0_LOW 2 - #define AT91_SHDW_WKMODE0_ANYLEVEL 3 - #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ -+#define AT91_SHDW_CPTWK0_(x) ((x) << 4) - #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ - - #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ - #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ - #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ -+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ - - #endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h linux-2.6/include/asm-arm/arch-at91/at91_twi.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_twi.h 2008-01-16 21:24:29.000000000 +0200 -@@ -21,6 +21,8 @@ - #define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ - #define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ - #define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ -+#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ -+#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ - #define AT91_TWI_SWRST (1 << 7) /* Software Reset */ - - #define AT91_TWI_MMR 0x04 /* Master Mode Register */ -@@ -32,6 +34,9 @@ - #define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ - #define AT91_TWI_DADR (0x7f << 16) /* Device Address */ - -+#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ -+#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ -+ - #define AT91_TWI_IADR 0x0c /* Internal Address Register */ - - #define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ -@@ -43,9 +48,15 @@ - #define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ - #define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ - #define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -+#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ -+#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ -+#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ - #define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ - #define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ - #define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ -+#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ -+#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ -+#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ - - #define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ - #define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-03-01 19:37:40.000000000 +0200 -@@ -0,0 +1,126 @@ -+/* -+ * include/asm-arm/arch-at91/at91cap9.h -+ * -+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> -+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -+ * Copyright (C) 2007 Atmel Corporation. -+ * -+ * Common definitions. -+ * Based on AT91CAP9 datasheet revision B (Preliminary). -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91CAP9_H -+#define AT91CAP9_H -+ -+/* -+ * Peripheral identifiers/interrupts. -+ */ -+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -+#define AT91_ID_SYS 1 /* System Peripherals */ -+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -+#define AT91CAP9_ID_US0 8 /* USART 0 */ -+#define AT91CAP9_ID_US1 9 /* USART 1 */ -+#define AT91CAP9_ID_US2 10 /* USART 2 */ -+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -+#define AT91CAP9_ID_CAN 13 /* CAN */ -+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -+#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -+#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -+#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ -+ -+/* -+ * User Peripheral physical base addresses. -+ */ -+#define AT91CAP9_BASE_UDPHS 0xfff78000 -+#define AT91CAP9_BASE_TCB0 0xfff7c000 -+#define AT91CAP9_BASE_TC0 0xfff7c000 -+#define AT91CAP9_BASE_TC1 0xfff7c040 -+#define AT91CAP9_BASE_TC2 0xfff7c080 -+#define AT91CAP9_BASE_MCI0 0xfff80000 -+#define AT91CAP9_BASE_MCI1 0xfff84000 -+#define AT91CAP9_BASE_TWI 0xfff88000 -+#define AT91CAP9_BASE_US0 0xfff8c000 -+#define AT91CAP9_BASE_US1 0xfff90000 -+#define AT91CAP9_BASE_US2 0xfff94000 -+#define AT91CAP9_BASE_SSC0 0xfff98000 -+#define AT91CAP9_BASE_SSC1 0xfff9c000 -+#define AT91CAP9_BASE_AC97C 0xfffa0000 -+#define AT91CAP9_BASE_SPI0 0xfffa4000 -+#define AT91CAP9_BASE_SPI1 0xfffa8000 -+#define AT91CAP9_BASE_CAN 0xfffac000 -+#define AT91CAP9_BASE_PWMC 0xfffb8000 -+#define AT91CAP9_BASE_EMAC 0xfffbc000 -+#define AT91CAP9_BASE_ADC 0xfffc0000 -+#define AT91CAP9_BASE_ISI 0xfffc4000 -+#define AT91_BASE_SYS 0xffffe200 -+ -+/* -+ * System Peripherals (offset from AT91_BASE_SYS) -+ */ -+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) -+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) -+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) -+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) -+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) -+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) -+ -+#define AT91_USART0 AT91CAP9_BASE_US0 -+#define AT91_USART1 AT91CAP9_BASE_US1 -+#define AT91_USART2 AT91CAP9_BASE_US2 -+ -+ -+/* -+ * Internal Memory. -+ */ -+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ -+ -+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ -+ -+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */ -+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -+ -+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-03-01 21:29:08.000000000 +0200 -@@ -0,0 +1,100 @@ -+/* -+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h -+ * -+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers. -+ * Based on AT91CAP9 datasheet revision B. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91CAP9_DDRSDR_H -+#define AT91CAP9_DDRSDR_H -+ -+#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ -+#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ -+#define AT91_DDRSDRC_MODE_NORMAL 0 -+#define AT91_DDRSDRC_MODE_NOP 1 -+#define AT91_DDRSDRC_MODE_PRECHARGE 2 -+#define AT91_DDRSDRC_MODE_LMR 3 -+#define AT91_DDRSDRC_MODE_REFRESH 4 -+#define AT91_DDRSDRC_MODE_EXT_LMR 5 -+#define AT91_DDRSDRC_MODE_DEEP 6 -+ -+#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ -+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -+ -+#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ -+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -+#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -+#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -+#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -+#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -+#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -+#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -+#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -+#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -+#define AT91_DDRSDRC_NR_11 (0 << 2) -+#define AT91_DDRSDRC_NR_12 (1 << 2) -+#define AT91_DDRSDRC_NR_13 (2 << 2) -+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -+#define AT91_DDRSDRC_CAS_2 (2 << 4) -+#define AT91_DDRSDRC_CAS_3 (3 << 4) -+#define AT91_DDRSDRC_CAS_25 (6 << 4) -+#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -+ -+#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ -+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -+#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ -+ -+#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ -+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -+ -+#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ -+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -+#define AT91_DDRSDRC_LPCB_DISABLE 0 -+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -+ -+#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ -+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -+#define AT91_DDRSDRC_MD_SDR 0 -+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -+#define AT91_DDRSDRC_MD_DDR 2 -+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -+ -+#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ -+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -+#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -+#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -+#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -+#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -+#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ -+ -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-02-18 22:43:38.000000000 +0200 -@@ -0,0 +1,132 @@ -+/* -+ * include/asm-arm/arch-at91/at91cap9_matrix.h -+ * -+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> -+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -+ * Copyright (C) 2006 Atmel Corporation. -+ * -+ * Memory Controllers (MATRIX, EBI) - System peripherals registers. -+ * Based on AT91CAP9 datasheet revision B (Preliminary). -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91CAP9_MATRIX_H -+#define AT91CAP9_MATRIX_H -+ -+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -+#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -+#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -+#define AT91_MATRIX_ULBT_FOUR (2 << 0) -+#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -+ -+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -+ -+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ -+ -+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -+#define AT91_MATRIX_RCB2 (1 << 2) -+#define AT91_MATRIX_RCB3 (1 << 3) -+#define AT91_MATRIX_RCB4 (1 << 4) -+#define AT91_MATRIX_RCB5 (1 << 5) -+#define AT91_MATRIX_RCB6 (1 << 6) -+#define AT91_MATRIX_RCB7 (1 << 7) -+#define AT91_MATRIX_RCB8 (1 << 8) -+#define AT91_MATRIX_RCB9 (1 << 9) -+#define AT91_MATRIX_RCB10 (1 << 10) -+#define AT91_MATRIX_RCB11 (1 << 11) -+ -+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ -+ -+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -+ -+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h linux-2.6/include/asm-arm/arch-at91/at91rm9200.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91rm9200.h 2008-02-24 19:07:01.000000000 +0200 -@@ -95,6 +95,12 @@ - - #define AT91_MATRIX 0 /* not supported */ - -+#define AT91_USART0 AT91RM9200_BASE_US0 -+#define AT91_USART1 AT91RM9200_BASE_US1 -+#define AT91_USART2 AT91RM9200_BASE_US2 -+#define AT91_USART3 AT91RM9200_BASE_US3 -+ -+ - /* - * Internal Memory. - */ -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h linux-2.6/include/asm-arm/arch-at91/at91sam9260.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260.h 2008-02-24 19:00:30.000000000 +0200 -@@ -99,6 +99,13 @@ - #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -+#define AT91_USART0 AT91SAM9260_BASE_US0 -+#define AT91_USART1 AT91SAM9260_BASE_US1 -+#define AT91_USART2 AT91SAM9260_BASE_US2 -+#define AT91_USART3 AT91SAM9260_BASE_US3 -+#define AT91_USART4 AT91SAM9260_BASE_US4 -+#define AT91_USART5 AT91SAM9260_BASE_US5 -+ - - /* - * Internal Memory. -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-01-16 21:24:29.000000000 +0200 -@@ -67,7 +67,7 @@ - #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ - #define AT91_MATRIX_CS4A_SMC (0 << 4) - #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) --#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */ -+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ - #define AT91_MATRIX_CS5A_SMC (0 << 5) - #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) - #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h linux-2.6/include/asm-arm/arch-at91/at91sam9261.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9261.h 2008-02-24 19:00:30.000000000 +0200 -@@ -84,6 +84,10 @@ - #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -+#define AT91_USART0 AT91SAM9261_BASE_US0 -+#define AT91_USART1 AT91SAM9261_BASE_US1 -+#define AT91_USART2 AT91SAM9261_BASE_US2 -+ - - /* - * Internal Memory. -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h linux-2.6/include/asm-arm/arch-at91/at91sam9263.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9263.h 2008-02-25 21:16:43.000000000 +0200 -@@ -101,8 +101,14 @@ - #define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) - #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - -+#define AT91_SDRAMC AT91_SDRAMC0 - #define AT91_SMC AT91_SMC0 - -+#define AT91_USART0 AT91SAM9263_BASE_US0 -+#define AT91_USART1 AT91SAM9263_BASE_US1 -+#define AT91_USART2 AT91SAM9263_BASE_US2 -+ -+ - /* - * Internal Memory. - */ -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h 2008-02-18 22:44:20.000000000 +0200 -@@ -44,7 +44,7 @@ - #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) - #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) - #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) --#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ - #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ - #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) - #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200 -@@ -1,141 +0,0 @@ --/* -- * include/asm-arm/arch-at91/at91sam926x_mc.h -- * -- * Memory Controllers (SMC, SDRAMC) - System peripherals registers. -- * Based on AT91SAM9261 datasheet revision D. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- */ -- --#ifndef AT91SAM926x_MC_H --#define AT91SAM926x_MC_H -- --/* SDRAM Controller (SDRAMC) registers */ --#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ --#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ --#define AT91_SDRAMC_MODE_NORMAL 0 --#define AT91_SDRAMC_MODE_NOP 1 --#define AT91_SDRAMC_MODE_PRECHARGE 2 --#define AT91_SDRAMC_MODE_LMR 3 --#define AT91_SDRAMC_MODE_REFRESH 4 --#define AT91_SDRAMC_MODE_EXT_LMR 5 --#define AT91_SDRAMC_MODE_DEEP 6 -- --#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ --#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -- --#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ --#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ --#define AT91_SDRAMC_NC_8 (0 << 0) --#define AT91_SDRAMC_NC_9 (1 << 0) --#define AT91_SDRAMC_NC_10 (2 << 0) --#define AT91_SDRAMC_NC_11 (3 << 0) --#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ --#define AT91_SDRAMC_NR_11 (0 << 2) --#define AT91_SDRAMC_NR_12 (1 << 2) --#define AT91_SDRAMC_NR_13 (2 << 2) --#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ --#define AT91_SDRAMC_NB_2 (0 << 4) --#define AT91_SDRAMC_NB_4 (1 << 4) --#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ --#define AT91_SDRAMC_CAS_1 (1 << 5) --#define AT91_SDRAMC_CAS_2 (2 << 5) --#define AT91_SDRAMC_CAS_3 (3 << 5) --#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ --#define AT91_SDRAMC_DBW_32 (0 << 7) --#define AT91_SDRAMC_DBW_16 (1 << 7) --#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ --#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ --#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ --#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ --#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ --#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ -- --#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ --#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ --#define AT91_SDRAMC_LPCB_DISABLE 0 --#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 --#define AT91_SDRAMC_LPCB_POWER_DOWN 2 --#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 --#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ --#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ --#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ --#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ --#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) --#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) --#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) -- --#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ --#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ --#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ --#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ --#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ -- --#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ --#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ --#define AT91_SDRAMC_MD_SDRAM 0 --#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -- -- --/* Static Memory Controller (SMC) registers */ --#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ --#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ --#define AT91_SMC_NWESETUP_(x) ((x) << 0) --#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ --#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) --#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ --#define AT91_SMC_NRDSETUP_(x) ((x) << 16) --#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ --#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) -- --#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ --#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ --#define AT91_SMC_NWEPULSE_(x) ((x) << 0) --#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ --#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) --#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ --#define AT91_SMC_NRDPULSE_(x) ((x) << 16) --#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ --#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) -- --#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ --#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ --#define AT91_SMC_NWECYCLE_(x) ((x) << 0) --#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ --#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) -- --#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ --#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ --#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ --#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ --#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) --#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) --#define AT91_SMC_EXNWMODE_READY (3 << 4) --#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ --#define AT91_SMC_BAT_SELECT (0 << 8) --#define AT91_SMC_BAT_WRITE (1 << 8) --#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ --#define AT91_SMC_DBW_8 (0 << 12) --#define AT91_SMC_DBW_16 (1 << 12) --#define AT91_SMC_DBW_32 (2 << 12) --#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ --#define AT91_SMC_TDF_(x) ((x) << 16) --#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ --#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ --#define AT91_SMC_PS (3 << 28) /* Page Size */ --#define AT91_SMC_PS_4 (0 << 28) --#define AT91_SMC_PS_8 (1 << 28) --#define AT91_SMC_PS_16 (2 << 28) --#define AT91_SMC_PS_32 (3 << 28) -- --#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ --#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ --#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ --#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ --#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ --#endif -- --#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h 2008-03-01 21:17:06.000000000 +0200 -@@ -0,0 +1,83 @@ -+/* -+ * include/asm-arm/arch-at91/at91sam926x_sdramc.h -+ * -+ * SDRAM Controllers (SDRAMC) - System peripherals registers. -+ * Based on AT91SAM9261 datasheet revision D. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91SAM926x_SDRAMC_H -+#define AT91SAM926x_SDRAMC_H -+ -+/* SDRAM Controller (SDRAMC) registers */ -+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ -+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -+#define AT91_SDRAMC_MODE_NORMAL 0 -+#define AT91_SDRAMC_MODE_NOP 1 -+#define AT91_SDRAMC_MODE_PRECHARGE 2 -+#define AT91_SDRAMC_MODE_LMR 3 -+#define AT91_SDRAMC_MODE_REFRESH 4 -+#define AT91_SDRAMC_MODE_EXT_LMR 5 -+#define AT91_SDRAMC_MODE_DEEP 6 -+ -+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ -+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -+ -+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ -+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -+#define AT91_SDRAMC_NC_8 (0 << 0) -+#define AT91_SDRAMC_NC_9 (1 << 0) -+#define AT91_SDRAMC_NC_10 (2 << 0) -+#define AT91_SDRAMC_NC_11 (3 << 0) -+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -+#define AT91_SDRAMC_NR_11 (0 << 2) -+#define AT91_SDRAMC_NR_12 (1 << 2) -+#define AT91_SDRAMC_NR_13 (2 << 2) -+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -+#define AT91_SDRAMC_NB_2 (0 << 4) -+#define AT91_SDRAMC_NB_4 (1 << 4) -+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -+#define AT91_SDRAMC_CAS_1 (1 << 5) -+#define AT91_SDRAMC_CAS_2 (2 << 5) -+#define AT91_SDRAMC_CAS_3 (3 << 5) -+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -+#define AT91_SDRAMC_DBW_32 (0 << 7) -+#define AT91_SDRAMC_DBW_16 (1 << 7) -+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ -+ -+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ -+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -+#define AT91_SDRAMC_LPCB_DISABLE 0 -+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -+#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ -+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) -+ -+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ -+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ -+ -+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ -+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -+#define AT91_SDRAMC_MD_SDRAM 0 -+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -+ -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h 2008-03-01 20:28:24.000000000 +0200 -@@ -0,0 +1,73 @@ -+/* -+ * include/asm-arm/arch-at91/at91sam926x_smc.h -+ * -+ * Static Memory Controllers (SMC) - System peripherals registers. -+ * Based on AT91SAM9261 datasheet revision D. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef AT91SAM926x_SMC_H -+#define AT91SAM926x_SMC_H -+ -+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -+#define AT91_SMC_NWESETUP_(x) ((x) << 0) -+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -+#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) -+ -+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -+#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -+#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) -+ -+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -+#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) -+ -+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -+#define AT91_SMC_EXNWMODE_READY (3 << 4) -+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -+#define AT91_SMC_BAT_SELECT (0 << 8) -+#define AT91_SMC_BAT_WRITE (1 << 8) -+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -+#define AT91_SMC_DBW_8 (0 << 12) -+#define AT91_SMC_DBW_16 (1 << 12) -+#define AT91_SMC_DBW_32 (2 << 12) -+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -+#define AT91_SMC_TDF_(x) ((x) << 16) -+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -+#define AT91_SMC_PS (3 << 28) /* Page Size */ -+#define AT91_SMC_PS_4 (0 << 28) -+#define AT91_SMC_PS_8 (1 << 28) -+#define AT91_SMC_PS_16 (2 << 28) -+#define AT91_SMC_PS_32 (3 << 28) -+ -+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -+#endif -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-02-24 19:00:30.000000000 +0200 -@@ -94,6 +94,11 @@ - #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - #define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) - -+#define AT91_USART0 AT91SAM9RL_BASE_US0 -+#define AT91_USART1 AT91SAM9RL_BASE_US1 -+#define AT91_USART2 AT91SAM9RL_BASE_US2 -+#define AT91_USART3 AT91SAM9RL_BASE_US3 -+ - - /* - * Internal Memory. -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h ---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2008-02-18 22:44:40.000000000 +0200 -@@ -38,7 +38,7 @@ - #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) - #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) - #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) --#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ - #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ - #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) - #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h ---- linux-2.6.24/include/asm-arm/arch-at91/board.h 2008-03-01 22:02:15.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-03-01 23:39:28.000000000 +0200 -@@ -34,6 +34,7 @@ - #include <linux/mtd/partitions.h> - #include <linux/device.h> - #include <linux/i2c.h> -+#include <linux/leds.h> - #include <linux/spi/spi.h> - - /* USB Device */ -@@ -71,7 +72,7 @@ - }; - extern void __init at91_add_device_eth(struct at91_eth_data *data); - --#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) -+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) - #define eth_platform_data at91_eth_data - #endif - -@@ -101,13 +102,23 @@ - extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - - /* Serial */ -+#define ATMEL_UART_CTS 0x01 -+#define ATMEL_UART_RTS 0x02 -+#define ATMEL_UART_DSR 0x04 -+#define ATMEL_UART_DTR 0x08 -+#define ATMEL_UART_DCD 0x10 -+#define ATMEL_UART_RI 0x20 -+ -+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); -+extern void __init at91_set_serial_console(unsigned portnr); -+ - struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ - }; - extern struct platform_device *atmel_default_console_device; --extern void __init at91_init_serial(struct at91_uart_config *config); -+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); - - struct atmel_uart_data { - short use_dma_tx; /* use transmit DMA? */ -@@ -116,6 +127,23 @@ - }; - extern void __init at91_add_device_serial(void); - -+ /* -+ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC -+ * platform devices. Their SSC ID is part of their configuration data, -+ * along with information about which SSC signals they should use. -+ */ -+#define ATMEL_SSC_TK 0x01 -+#define ATMEL_SSC_TF 0x02 -+#define ATMEL_SSC_TD 0x04 -+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) -+ -+#define ATMEL_SSC_RK 0x10 -+#define ATMEL_SSC_RF 0x20 -+#define ATMEL_SSC_RD 0x40 -+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) -+ -+extern void __init at91_add_device_ssc(unsigned id, unsigned pins); -+ - /* LCD Controller */ - struct atmel_lcdfb_info; - extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); -@@ -126,10 +154,12 @@ - }; - extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); - -+ /* ISI */ -+extern void __init at91_add_device_isi(void); -+ - /* LEDs */ --extern u8 at91_leds_cpu; --extern u8 at91_leds_timer; - extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); -+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); - - /* FIXME: this needs a better location, but gets stuff building again */ - extern int at91_suspend_entering_slow_clock(void); -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h ---- linux-2.6.24/include/asm-arm/arch-at91/cpu.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-01-17 11:41:08.000000000 +0200 -@@ -21,13 +21,13 @@ - #define ARCH_ID_AT91SAM9260 0x019803a0 - #define ARCH_ID_AT91SAM9261 0x019703a0 - #define ARCH_ID_AT91SAM9263 0x019607a0 -+#define ARCH_ID_AT91SAM9RL64 0x019b03a0 -+#define ARCH_ID_AT91CAP9 0x039A03A0 - - #define ARCH_ID_AT91SAM9XE128 0x329973a0 - #define ARCH_ID_AT91SAM9XE256 0x329a93a0 - #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 - --#define ARCH_ID_AT91SAM9RL64 0x019b03a0 -- - #define ARCH_ID_AT91M40800 0x14080044 - #define ARCH_ID_AT91R40807 0x44080746 - #define ARCH_ID_AT91M40807 0x14080745 -@@ -81,6 +81,11 @@ - #define cpu_is_at91sam9rl() (0) - #endif - -+#ifdef CONFIG_ARCH_AT91CAP9 -+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) -+#else -+#define cpu_is_at91cap9() (0) -+#endif - - /* - * Since this is ARM, we will never run on any AVR32 CPU. But these -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S linux-2.6/include/asm-arm/arch-at91/entry-macro.S ---- linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/entry-macro.S 2008-01-16 21:24:29.000000000 +0200 -@@ -17,13 +17,13 @@ - .endm - - .macro get_irqnr_preamble, base, tmp -+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral - ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/hardware.h linux-2.6/include/asm-arm/arch-at91/hardware.h ---- linux-2.6.24/include/asm-arm/arch-at91/hardware.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/hardware.h 2008-01-16 21:25:18.000000000 +0200 -@@ -26,6 +26,8 @@ - #include <asm/arch/at91sam9263.h> - #elif defined(CONFIG_ARCH_AT91SAM9RL) - #include <asm/arch/at91sam9rl.h> -+#elif defined(CONFIG_ARCH_AT91CAP9) -+#include <asm/arch/at91cap9.h> - #elif defined(CONFIG_ARCH_AT91X40) - #include <asm/arch/at91x40.h> - #else -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h ---- linux-2.6.24/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200 -@@ -0,0 +1,154 @@ -+//*---------------------------------------------------------------------------- -+//* ATMEL Microcontroller Software Support - ROUSSET - -+//*---------------------------------------------------------------------------- -+//* The software is delivered "AS IS" without warranty or condition of any -+//* kind, either express, implied or statutory. This includes without -+//* limitation any warranty or condition with respect to merchantability or -+//* fitness for any particular purpose, or against the infringements of -+//* intellectual property rights of others. -+//*---------------------------------------------------------------------------- -+//* File Name : ics1523.h -+//* Object : Clock Generator Prototyping File. -+//* -+//* 1.0 08/28/02 ED : Creation -+//* 1.2 13/01/03 FB : Update on lib V3 -+//*---------------------------------------------------------------------------- -+ -+#ifndef ics1523_h -+#define ics1523_h -+ -+/*-------------------------------------------*/ -+/* ICS1523 TWI Serial Clock Definition */ -+/*-------------------------------------------*/ -+ -+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */ -+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */ -+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */ -+ -+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */ -+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */ -+ -+/*-------------------------------------------*/ -+/* ICS1523 Write Operation Definition */ -+/*-------------------------------------------*/ -+ -+#define ICS1523_ACCESS_OK 0 /* OK */ -+#define ICS1523_ACCESS_ERROR -1 /* NOK */ -+ -+/*-------------------------------------------*/ -+/* ICS1523 Device Addresses Definition */ -+/*-------------------------------------------*/ -+ -+#define ICS_ADDR 0x26 /* Device Address */ -+ -+/*--------------------------------------------------*/ -+/* ICS1523 Registers Internal Addresses Definition */ -+/*--------------------------------------------------*/ -+ -+#define ICS_ICR 0x0 /* Input Control Register */ -+#define ICS_LCR 0x1 /* Loop Control Register */ -+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */ -+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */ -+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */ -+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */ -+#define ICS_OE 0x6 /* Output Enables Register */ -+#define ICS_OD 0x7 /* Osc Divider Register */ -+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */ -+#define ICS_VID 0x10 /* Chip Version Register */ -+#define ICS_RID 0x11 /* Chip Revision Register */ -+#define ICS_SR 0x12 /* Status Register */ -+ -+/*------------------------------------------------------*/ -+/* ICS1523 Input Control Register Bits Definition */ -+/*------------------------------------------------------*/ -+ -+#define ICS_PDEN 0x1 /* Phase Detector Enable */ -+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */ -+#define ICS_REFPOL 0x4 /* External Reference Polarity */ -+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */ -+#define ICS_FBKSEL 0x10 /* External Feedback Select */ -+#define ICS_FUNCSEL 0x20 /* Function Out Select */ -+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */ -+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */ -+ -+/*-----------------------------------------------------*/ -+/* ICS1523 Loop Control Register Bits Definition */ -+/*-----------------------------------------------------*/ -+ -+#define ICS_PFD 0x7 /* Phase Detector Gain */ -+#define ICS_PSD 0x30 /* Post-Scaler Divider */ -+ -+/*----------------------------------------------------*/ -+/* ICS1523 PLL FeedBack Divider LSBs Definition */ -+/*----------------------------------------------------*/ -+ -+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */ -+ -+/*----------------------------------------------------*/ -+/* ICS1523 PLL FeedBack Divider MSBs Definition */ -+/*----------------------------------------------------*/ -+ -+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */ -+ -+/*------------------------------------------------------------*/ -+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */ -+/*------------------------------------------------------------*/ -+ -+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */ -+#define ICS_FILSEL 0x80 /* Loop Filter Select */ -+ -+/*----------------------------------------------------------------*/ -+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */ -+/*----------------------------------------------------------------*/ -+ -+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */ -+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */ -+ -+/*-------------------------------------------------------*/ -+/* ICS1523 Output Enables Register Bits Definition */ -+/*-------------------------------------------------------*/ -+ -+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */ -+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */ -+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */ -+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */ -+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */ -+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */ -+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */ -+ -+/*----------------------------------------------------*/ -+/* ICS1523 Osc Divider Register Bits Definition */ -+/*----------------------------------------------------*/ -+ -+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */ -+#define ICS_INSEL 0x80 /* Input Select */ -+ -+/*---------------------------------------------------*/ -+/* ICS1523 DPA & PLL Reset Register Definition */ -+/*---------------------------------------------------*/ -+ -+#define ICS_DPAR 0x0A /* DPA Reset Command */ -+#define ICS_PLLR 0x50 /* PLL Reset Command */ -+ -+/*------------------------------------------------*/ -+/* ICS1523 Chip Version Register Definition */ -+/*------------------------------------------------*/ -+ -+#define ICS_CHIPV 0xFF /* Chip Version */ -+ -+/*-------------------------------------------------*/ -+/* ICS1523 Chip Revision Register Definition */ -+/*-------------------------------------------------*/ -+ -+#define ICS_CHIPR 0xFF /* Chip Revision */ -+ -+/*------------------------------------------*/ -+/* ICS1523 Status Register Definition */ -+/*------------------------------------------*/ -+ -+#define ICS_DPALOCK 0x1 /* DPA Lock Status */ -+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */ -+ -+int at91_ics1523_init(void); -+ -+#endif /* ics1523_h */ -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h ---- linux-2.6.24/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200 -@@ -0,0 +1,54 @@ -+/* -+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 -+ * -+ * (c) SAN People (Pty) Ltd -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#ifndef AT91_LEGACY_SPI_H -+#define AT91_LEGACY_SPI_H -+ -+#define SPI_MAJOR 153 /* registered device number */ -+ -+#define DEFAULT_SPI_CLK 6000000 -+ -+ -+/* Maximum number of buffers in a single SPI transfer. -+ * DataFlash uses maximum of 2 -+ * spidev interface supports up to 8. -+ */ -+#define MAX_SPI_TRANSFERS 8 -+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */ -+ -+/* -+ * Describes the buffers for a SPI transfer. -+ * A transmit & receive buffer must be specified for each transfer -+ */ -+struct spi_transfer_list { -+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */ -+ int txlen[MAX_SPI_TRANSFERS]; -+ void* rx[MAX_SPI_TRANSFERS]; /* receive */ -+ int rxlen[MAX_SPI_TRANSFERS]; -+ int nr_transfers; /* number of transfers */ -+ int curr; /* current transfer */ -+}; -+ -+struct spi_local { -+ unsigned int pcs; /* Peripheral Chip Select value */ -+ -+ struct spi_transfer_list *xfers; /* current transfer list */ -+ dma_addr_t tx, rx; /* DMA address for current transfer */ -+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */ -+}; -+ -+ -+/* Exported functions */ -+extern void spi_access_bus(short device); -+extern void spi_release_bus(short device); -+extern int spi_transfer(struct spi_transfer_list* list); -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h ---- linux-2.6.24/include/asm-arm/arch-at91/timex.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-01-16 21:25:18.000000000 +0200 -@@ -42,6 +42,11 @@ - #define AT91SAM9_MASTER_CLOCK 100000000 - #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -+#elif defined(CONFIG_ARCH_AT91CAP9) -+ -+#define AT91CAP9_MASTER_CLOCK 100000000 -+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16) -+ - #elif defined(CONFIG_ARCH_AT91X40) - - #define AT91X40_MASTER_CLOCK 40000000 -diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/uncompress.h linux-2.6/include/asm-arm/arch-at91/uncompress.h ---- linux-2.6.24/include/asm-arm/arch-at91/uncompress.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/uncompress.h 2008-02-24 19:00:30.000000000 +0200 -@@ -22,7 +22,23 @@ - #define __ASM_ARCH_UNCOMPRESS_H - - #include <asm/io.h> --#include <asm/arch/at91_dbgu.h> -+#include <linux/atmel_serial.h> -+ -+#if defined(CONFIG_AT91_EARLY_DBGU) -+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS) -+#elif defined(CONFIG_AT91_EARLY_USART0) -+#define UART_OFFSET AT91_USART0 -+#elif defined(CONFIG_AT91_EARLY_USART1) -+#define UART_OFFSET AT91_USART1 -+#elif defined(CONFIG_AT91_EARLY_USART2) -+#define UART_OFFSET AT91_USART2 -+#elif defined(CONFIG_AT91_EARLY_USART3) -+#define UART_OFFSET AT91_USART3 -+#elif defined(CONFIG_AT91_EARLY_USART4) -+#define UART_OFFSET AT91_USART4 -+#elif defined(CONFIG_AT91_EARLY_USART5) -+#define UART_OFFSET AT91_USART5 -+#endif - - /* - * The following code assumes the serial port has already been -@@ -33,22 +49,22 @@ - */ - static void putc(int c) - { --#ifdef AT91_DBGU -- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ -+#ifdef UART_OFFSET -+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - -- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) -+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY)) - barrier(); -- __raw_writel(c, sys + AT91_DBGU_THR); -+ __raw_writel(c, sys + ATMEL_US_THR); - #endif - } - - static inline void flush(void) - { --#ifdef AT91_DBGU -- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ -+#ifdef UART_OFFSET -+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - - /* wait for transmission to complete */ -- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) -+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) - barrier(); - #endif - } -diff -urN -x CVS linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-2.6/include/asm-avr32/arch-at32ap/cpu.h ---- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-avr32/arch-at32ap/cpu.h 2008-01-16 21:35:26.000000000 +0200 -@@ -30,5 +30,6 @@ - #define cpu_is_at91sam9261() (0) - #define cpu_is_at91sam9263() (0) - #define cpu_is_at91sam9rl() (0) -+#define cpu_is_at91cap9() (0) - - #endif /* __ASM_ARCH_CPU_H */ -diff -urN -x CVS linux-2.6.24/include/linux/atmel_serial.h linux-2.6/include/linux/atmel_serial.h ---- linux-2.6.24/include/linux/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/linux/atmel_serial.h 2008-02-24 19:00:30.000000000 +0200 -@@ -0,0 +1,127 @@ -+/* -+ * include/linux/atmel_serial.h -+ * -+ * Copyright (C) 2005 Ivan Kokshaysky -+ * Copyright (C) SAN People -+ * -+ * USART registers. -+ * Based on AT91RM9200 datasheet revision E. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef ATMEL_SERIAL_H -+#define ATMEL_SERIAL_H -+ -+#define ATMEL_US_CR 0x00 /* Control Register */ -+#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */ -+#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */ -+#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */ -+#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */ -+#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */ -+#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */ -+#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */ -+#define ATMEL_US_STTBRK (1 << 9) /* Start Break */ -+#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */ -+#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */ -+#define ATMEL_US_SENDA (1 << 12) /* Send Address */ -+#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ -+#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ -+#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ -+#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ -+#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ -+#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ -+#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ -+ -+#define ATMEL_US_MR 0x04 /* Mode Register */ -+#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */ -+#define ATMEL_US_USMODE_NORMAL 0 -+#define ATMEL_US_USMODE_RS485 1 -+#define ATMEL_US_USMODE_HWHS 2 -+#define ATMEL_US_USMODE_MODEM 3 -+#define ATMEL_US_USMODE_ISO7816_T0 4 -+#define ATMEL_US_USMODE_ISO7816_T1 6 -+#define ATMEL_US_USMODE_IRDA 8 -+#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ -+#define ATMEL_US_USCLKS_MCK (0 << 4) -+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -+#define ATMEL_US_USCLKS_SCK (3 << 4) -+#define ATMEL_US_CHRL (3 << 6) /* Character Length */ -+#define ATMEL_US_CHRL_5 (0 << 6) -+#define ATMEL_US_CHRL_6 (1 << 6) -+#define ATMEL_US_CHRL_7 (2 << 6) -+#define ATMEL_US_CHRL_8 (3 << 6) -+#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */ -+#define ATMEL_US_PAR (7 << 9) /* Parity Type */ -+#define ATMEL_US_PAR_EVEN (0 << 9) -+#define ATMEL_US_PAR_ODD (1 << 9) -+#define ATMEL_US_PAR_SPACE (2 << 9) -+#define ATMEL_US_PAR_MARK (3 << 9) -+#define ATMEL_US_PAR_NONE (4 << 9) -+#define ATMEL_US_PAR_MULTI_DROP (6 << 9) -+#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */ -+#define ATMEL_US_NBSTOP_1 (0 << 12) -+#define ATMEL_US_NBSTOP_1_5 (1 << 12) -+#define ATMEL_US_NBSTOP_2 (2 << 12) -+#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */ -+#define ATMEL_US_CHMODE_NORMAL (0 << 14) -+#define ATMEL_US_CHMODE_ECHO (1 << 14) -+#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -+#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) -+#define ATMEL_US_MSBF (1 << 16) /* Bit Order */ -+#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */ -+#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */ -+#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */ -+#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ -+#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */ -+#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */ -+#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ -+ -+#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ -+#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */ -+#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */ -+#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */ -+#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */ -+#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ -+#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */ -+#define ATMEL_US_FRAME (1 << 6) /* Framing Error */ -+#define ATMEL_US_PARE (1 << 7) /* Parity Error */ -+#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */ -+#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */ -+#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ -+#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ -+#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ -+#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ -+#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ -+#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ -+#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ -+#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ -+#define ATMEL_US_RI (1 << 20) /* RI */ -+#define ATMEL_US_DSR (1 << 21) /* DSR */ -+#define ATMEL_US_DCD (1 << 22) /* DCD */ -+#define ATMEL_US_CTS (1 << 23) /* CTS */ -+ -+#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ -+#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ -+#define ATMEL_US_CSR 0x14 /* Channel Status Register */ -+#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ -+#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -+#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ -+ -+#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ -+#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ -+ -+#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ -+#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */ -+ -+#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ -+#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */ -+ -+#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ -+#define ATMEL_US_NER 0x44 /* Number of Errors Register */ -+#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ -+ -+#endif -diff -urN -x CVS linux-2.6.24/include/linux/clk.h linux-2.6/include/linux/clk.h ---- linux-2.6.24/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200 -@@ -121,4 +121,24 @@ - */ - struct clk *clk_get_parent(struct clk *clk); - -+/** -+ * clk_must_disable - report whether a clock's users must disable it -+ * @clk: one node in the clock tree -+ * -+ * This routine returns true only if the upcoming system state requires -+ * disabling the specified clock. -+ * -+ * It's common for platform power states to constrain certain clocks (and -+ * their descendants) to be unavailable, while other states allow that -+ * clock to be active. A platform's power states often include an "all on" -+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and -+ * operating states which sacrifice functionality for lower power usage. -+ * -+ * The constraint value is commonly tested in device driver suspend(), to -+ * leave clocks active if they are needed for features like wakeup events. -+ * On platforms that support reduced functionality operating states, the -+ * constraint may also need to be tested during resume() and probe() calls. -+ */ -+int clk_must_disable(struct clk *clk); -+ - #endif -diff -urN -x CVS linux-2.6.24/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h ---- linux-2.6.24/include/linux/i2c-id.h 2008-03-01 22:02:17.000000000 +0200 -+++ linux-2.6/include/linux/i2c-id.h 2008-01-16 13:15:35.000000000 +0200 -@@ -211,6 +211,7 @@ - - /* --- PCA 9564 based algorithms */ - #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ -+#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */ - - /* --- ACPI Embedded controller algorithms */ - #define I2C_HW_ACPI_EC 0x1f0000 -diff -urN -x CVS linux-2.6.24/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h ---- linux-2.6.24/include/video/atmel_lcdc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/video/atmel_lcdc.h 2008-02-25 22:45:57.000000000 +0200 -@@ -22,7 +22,7 @@ - #ifndef __ATMEL_LCDC_H__ - #define __ATMEL_LCDC_H__ - -- /* LCD Controller info data structure */ -+ /* LCD Controller info data structure, stored in device platform_data */ - struct atmel_lcdfb_info { - spinlock_t lock; - struct fb_info *info; -@@ -33,7 +33,15 @@ - struct platform_device *pdev; - struct clk *bus_clk; - struct clk *lcdc_clk; -- unsigned int default_bpp; -+ -+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC -+ struct backlight_device *backlight; -+ u8 bl_power; -+#endif -+ bool lcdcon_is_backlight; -+ u8 saved_lcdcon; -+ -+ u8 default_bpp; - unsigned int default_lcdcon2; - unsigned int default_dmacon; - void (*atmel_lcdfb_power_control)(int on); -diff -urN -x CVS linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c ---- linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-01 22:06:40.000000000 +0200 -@@ -34,8 +34,7 @@ - #include <sound/soc.h> - #include <sound/soc-dapm.h> - --#include <asm/arch/hardware.h> --#include <asm/arch/at91_pio.h> -+#include <asm/hardware.h> - #include <asm/arch/gpio.h> - - #include "../codecs/wm8731.h" -@@ -48,13 +47,6 @@ - #define DBG(x...) - #endif - --#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32) --#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32) --#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32) --#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32) --#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32) --#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32) -- - static struct clk *pck1_clk; - static struct clk *pllb_clk; - -@@ -277,7 +269,6 @@ - static int __init eti_b1_init(void) - { - int ret; -- u32 ssc_pio_lines; - struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; - - if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { -@@ -311,19 +302,12 @@ - goto fail_io_unmap; - } - -- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1 -- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1; -- -- /* Reset all PIO registers and assign lines to peripheral A */ -- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines); -- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines); -+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */ -+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */ -+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */ -+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */ -+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */ -+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */ - - /* - * Set PCK1 parent to PLLB and its rate to 12 Mhz. -diff -urN -x CVS linux-2.6.24/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c ---- linux-2.6.24/sound/spi/at73c213.c 2008-03-01 22:02:18.000000000 +0200 -+++ linux-2.6/sound/spi/at73c213.c 2008-02-26 20:37:07.000000000 +0200 -@@ -112,7 +112,11 @@ - static struct snd_pcm_hardware snd_at73c213_playback_hw = { - .info = SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER, -+#ifdef __BIG_ENDIAN - .formats = SNDRV_PCM_FMTBIT_S16_BE, -+#else -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+#endif - .rates = SNDRV_PCM_RATE_CONTINUOUS, - .rate_min = 8000, /* Replaced by chip->bitrate later. */ - .rate_max = 50000, /* Replaced by chip->bitrate later. */ |