summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch')
-rw-r--r--target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch30343
1 files changed, 0 insertions, 30343 deletions
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch b/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch
deleted file mode 100644
index 803cd265f..000000000
--- a/target/device/Atmel/arch-arm/kernel-patches-2.6.24/linux-2.6.24-at91.patch
+++ /dev/null
@@ -1,30343 +0,0 @@
-diff -urN -x CVS linux-2.6.24/MAINTAINERS linux-2.6/MAINTAINERS
---- linux-2.6.24/MAINTAINERS 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/MAINTAINERS 2008-01-16 13:15:25.000000000 +0200
-@@ -437,7 +437,7 @@
-
- ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
- P: Andrew Victor
--M: andrew@sanpeople.com
-+M: linux@maxim.org.za
- L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
- W: http://maxim.org.za/at91_26.html
- S: Maintained
-diff -urN -x CVS linux-2.6.24/arch/arm/Kconfig linux-2.6/arch/arm/Kconfig
---- linux-2.6.24/arch/arm/Kconfig 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/Kconfig 2008-02-18 22:56:04.000000000 +0200
-@@ -180,8 +180,8 @@
- bool "Atmel AT91"
- select GENERIC_GPIO
- help
-- This enables support for systems based on the Atmel AT91RM9200
-- and AT91SAM9xxx processors.
-+ This enables support for systems based on the Atmel AT91RM9200,
-+ AT91SAM9 and AT91CAP9 processors.
-
- config ARCH_CLPS7500
- bool "Cirrus CL-PS7500FE"
-@@ -657,6 +657,7 @@
- default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410
- default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
-+ default AT91_TIMER_HZ if ARCH_AT91
- default 100
-
- config AEABI
-diff -urN -x CVS linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S 2007-12-31 10:43:35.000000000 +0200
-@@ -67,12 +67,36 @@
- cmp r7, r3
- beq 99f
-
-+ @ emQbit ECB_AT91 : 1072
-+ mov r3, #(MACH_TYPE_ECBAT91 & 0xff)
-+ orr r3, r3, #(MACH_TYPE_ECBAT91 & 0xff00)
-+ cmp r7, r3
-+ beq 99f
-+
- @ Ajeco 1ARM : 1075
- mov r3, #(MACH_TYPE_ONEARM & 0xff)
- orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
- cmp r7, r3
- beq 99f
-
-+ @ Promwad Chub : 1181
-+ mov r3, #(MACH_TYPE_CHUB & 0xff)
-+ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00)
-+ cmp r7, r3
-+ beq 99f
-+
-+ @ Sweda TMS-100: 1277
-+ mov r3, #(MACH_TYPE_SWEDATMS & 0xff)
-+ orr r3, r3, #(MACH_TYPE_SWEDATMS & 0xff00)
-+ cmp r7, r3
-+ beq 99f
-+
-+ @ eQ-3 HomeMatic: 1392
-+ mov r3, #(MACH_TYPE_HOMEMATIC & 0xff)
-+ orr r3, r3, #(MACH_TYPE_HOMEMATIC & 0xff00)
-+ cmp r7, r3
-+ beq 99f
-+
- @ Unknown board, use the AT91RM9200DK board
- @ mov r7, #MACH_TYPE_AT91RM9200
- mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig linux-2.6/arch/arm/configs/at91cap9adk_defconfig
---- linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91cap9adk_defconfig 2008-02-18 22:52:04.000000000 +0200
-@@ -0,0 +1,1143 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.24-rc8
-+# Wed Jan 23 22:55:57 2008
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+# CONFIG_IOSCHED_DEADLINE is not set
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+CONFIG_ARCH_AT91CAP9=y
-+# CONFIG_ARCH_AT91X40 is not set
-+CONFIG_AT91_PMC_UNIT=y
-+
-+#
-+# AT91CAP9 Board Type
-+#
-+CONFIG_MACH_AT91CAP9ADK=y
-+
-+#
-+# AT91 Board Options
-+#
-+CONFIG_MTD_AT91_DATAFLASH_CARD=y
-+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-+
-+#
-+# AT91 Feature Selections
-+#
-+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-+CONFIG_AT91_TIMER_HZ=100
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+# CONFIG_ARM_THUMB is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_TICK_ONESHOT is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+CONFIG_AEABI=y
-+CONFIG_OABI_COMPAT=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_LEDS=y
-+CONFIG_LEDS_TIMER=y
-+CONFIG_LEDS_CPU=y
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+CONFIG_IP_PNP_BOOTP=y
-+CONFIG_IP_PNP_RARP=y
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_IMPA7 is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=y
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+CONFIG_LOGO=y
-+# CONFIG_LOGO_LINUX_MONO is not set
-+CONFIG_LOGO_LINUX_VGA16=y
-+# CONFIG_LOGO_LINUX_CLUT224 is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_AT91=y
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_NEW_LEDS is not set
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+# CONFIG_EXT3_FS is not set
-+# CONFIG_EXT4DEV_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+# CONFIG_MSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_DEBUG_USER=y
-+# CONFIG_DEBUG_ERRORS is not set
-+# CONFIG_DEBUG_LL is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig linux-2.6/arch/arm/configs/at91rm9200dk_defconfig
---- linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91rm9200dk_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -620,14 +620,14 @@
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
- # CONFIG_I2C_PCA_ISA is not set
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig linux-2.6/arch/arm/configs/at91rm9200ek_defconfig
---- linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91rm9200ek_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -594,14 +594,14 @@
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
- # CONFIG_I2C_PCA_ISA is not set
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig linux-2.6/arch/arm/configs/at91sam9260ek_defconfig
---- linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91sam9260ek_defconfig 2008-01-08 22:21:02.000000000 +0200
-@@ -1,43 +1,56 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.19-rc6
--# Fri Nov 17 18:42:21 2006
-+# Linux kernel version: 2.6.24-rc7
-+# Tue Jan 8 22:20:50 2008
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_UTS_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -53,30 +66,30 @@
- CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
--CONFIG_SLAB=y
- CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--# CONFIG_SLOB is not set
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -108,12 +121,16 @@
- # CONFIG_ARCH_NETX is not set
- # CONFIG_ARCH_H720X is not set
- # CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
--# CONFIG_ARCH_IXP4XX is not set
--# CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -121,29 +138,52 @@
- # CONFIG_ARCH_S3C2410 is not set
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
- # CONFIG_ARCH_OMAP is not set
-
- #
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
- # Atmel AT91 System-on-Chip
- #
- # CONFIG_ARCH_AT91RM9200 is not set
- CONFIG_ARCH_AT91SAM9260=y
- # CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+# CONFIG_ARCH_AT91X40 is not set
-+CONFIG_AT91_PMC_UNIT=y
-+
-+#
-+# AT91SAM9260 Variants
-+#
-+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
- #
--# AT91SAM9260 Board Type
-+# AT91SAM9260 / AT91SAM9XE Board Type
- #
- CONFIG_MACH_AT91SAM9260EK=y
-+# CONFIG_MACH_CAM60 is not set
-+# CONFIG_MACH_SAM9_L9260 is not set
-
- #
- # AT91 Board Options
- #
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
- # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-
- #
- # AT91 Feature Selections
- #
--# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-+# CONFIG_ATMEL_TCLIB is not set
-+CONFIG_AT91_TIMER_HZ=100
-
- #
- # Processor Type
-@@ -166,19 +206,19 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--
--#
--# PCCARD (PCMCIA/CardBus) support
--#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- # CONFIG_PCCARD is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_TICK_ONESHOT is not set
- # CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
- CONFIG_HZ=100
-@@ -191,8 +231,12 @@
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -203,6 +247,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -228,7 +273,7 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-
- #
- # Networking
-@@ -238,13 +283,9 @@
- #
- # Networking options
- #
--# CONFIG_NETDEBUG is not set
- CONFIG_PACKET=y
- # CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
--CONFIG_XFRM=y
--# CONFIG_XFRM_USER is not set
--# CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -263,33 +304,23 @@
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
- # CONFIG_INET_TUNNEL is not set
--CONFIG_INET_XFRM_MODE_TRANSPORT=y
--CONFIG_INET_XFRM_MODE_TUNNEL=y
--CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_INET6_XFRM_TUNNEL is not set
- # CONFIG_INET6_TUNNEL is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
--
--#
--# DCCP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_DCCP is not set
--
--#
--# SCTP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_SCTP is not set
--
--#
--# TIPC Configuration (EXPERIMENTAL)
--#
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
- # CONFIG_BRIDGE is not set
-@@ -302,10 +333,6 @@
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
-
- #
-@@ -315,7 +342,17 @@
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -324,34 +361,17 @@
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
--
--#
--# Memory Technology Devices (MTD)
--#
- # CONFIG_MTD is not set
--
--#
--# Parallel port support
--#
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- # CONFIG_BLK_DEV_LOOP is not set
- # CONFIG_BLK_DEV_NBD is not set
-@@ -360,15 +380,19 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=y
-
- #
- # SCSI device support
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
-@@ -388,6 +412,8 @@
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-
- #
- # SCSI Transports
-@@ -395,43 +421,72 @@
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
--# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
--
--#
--# SCSI low-level drivers
--#
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
-+# CONFIG_ATA is not set
- # CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+CONFIG_NETDEV_1000=y
-+CONFIG_NETDEV_10000=y
-
- #
--# Fusion MPT device support
--#
--# CONFIG_FUSION is not set
--
--#
--# IEEE 1394 (FireWire) support
--#
--
--#
--# I2O device support
-+# Wireless LAN
- #
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-
- #
--# Network device support
-+# USB Network Adapters
- #
--# CONFIG_NETDEVICES is not set
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
-@@ -439,6 +494,7 @@
- #
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-
- #
- # Userland interfaces
-@@ -448,7 +504,6 @@
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_TSDEV is not set
- # CONFIG_INPUT_EVDEV is not set
- # CONFIG_INPUT_EVBUG is not set
-
-@@ -458,6 +513,7 @@
- # CONFIG_INPUT_KEYBOARD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
- # CONFIG_INPUT_TOUCHSCREEN is not set
- # CONFIG_INPUT_MISC is not set
-
-@@ -492,114 +548,131 @@
- CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--
--#
--# Watchdog Cards
--#
--CONFIG_WATCHDOG=y
--CONFIG_WATCHDOG_NOWAYOUT=y
--
--#
--# Watchdog Device Drivers
--#
--# CONFIG_SOFT_WATCHDOG is not set
--
--#
--# USB-based Watchdog Cards
--#
--# CONFIG_USBPCWATCHDOG is not set
--CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
--# CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
--
--#
--# Ftape, the floppy tape device driver
--#
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--
--#
--# I2C support
--#
--# CONFIG_I2C is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=y
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_GPIO=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_PCA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
- # SPI support
- #
- # CONFIG_SPI is not set
- # CONFIG_SPI_MASTER is not set
--
--#
--# Dallas's 1-wire bus
--#
- # CONFIG_W1 is not set
--
--#
--# Hardware Monitoring support
--#
-+# CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
--# CONFIG_HWMON_VID is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-
- #
--# Misc devices
-+# Watchdog Device Drivers
- #
--# CONFIG_TIFM_CORE is not set
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT91SAM9_WATCHDOG=y
-
- #
--# LED devices
-+# USB-based Watchdog Cards
- #
--# CONFIG_NEW_LEDS is not set
-+# CONFIG_USBPCWATCHDOG is not set
-
- #
--# LED drivers
-+# Sonics Silicon Backplane
- #
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
--# LED Triggers
-+# Multifunction device drivers
- #
-+# CONFIG_MFD_SM501 is not set
-
- #
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-
- #
--# Digital Video Broadcasting Devices
-+# Graphics support
- #
--# CONFIG_DVB is not set
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
--# Graphics support
-+# Display device support
- #
--# CONFIG_FIRMWARE_EDID is not set
--# CONFIG_FB is not set
-+# CONFIG_DISPLAY_SUPPORT is not set
-
- #
- # Console display driver support
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
- #
- # CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-
- #
--# USB support
-+# USB Input Devices
-+#
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
- #
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
- # CONFIG_USB_ARCH_HAS_EHCI is not set
-@@ -610,7 +683,7 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
-+CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -619,9 +692,11 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-
- #
- # USB Device Class drivers
-@@ -640,6 +715,7 @@
- CONFIG_USB_STORAGE_DEBUG=y
- # CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
- # CONFIG_USB_STORAGE_DPCM is not set
- # CONFIG_USB_STORAGE_USBAT is not set
- # CONFIG_USB_STORAGE_SDDR09 is not set
-@@ -650,43 +726,10 @@
- # CONFIG_USB_LIBUSUAL is not set
-
- #
--# USB Input Devices
--#
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
--# CONFIG_USB_AIPTEK is not set
--# CONFIG_USB_WACOM is not set
--# CONFIG_USB_ACECAD is not set
--# CONFIG_USB_KBTAB is not set
--# CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_TOUCHSCREEN is not set
--# CONFIG_USB_YEALINK is not set
--# CONFIG_USB_XPAD is not set
--# CONFIG_USB_ATI_REMOTE is not set
--# CONFIG_USB_ATI_REMOTE2 is not set
--# CONFIG_USB_KEYSPAN_REMOTE is not set
--# CONFIG_USB_APPLETOUCH is not set
--
--#
- # USB Imaging devices
- #
- # CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
--
--#
--# USB Network Adapters
--#
--# CONFIG_USB_CATC is not set
--# CONFIG_USB_KAWETH is not set
--# CONFIG_USB_PEGASUS is not set
--# CONFIG_USB_RTL8150 is not set
--# CONFIG_USB_USBNET_MII is not set
--# CONFIG_USB_USBNET is not set
- CONFIG_USB_MON=y
-
- #
-@@ -708,6 +751,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -717,6 +761,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -727,13 +772,19 @@
- # USB Gadget Support
- #
- CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
- # CONFIG_USB_GADGET_NET2280 is not set
- # CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
- # CONFIG_USB_GADGET_GOKU is not set
- # CONFIG_USB_GADGET_LH7A40X is not set
- # CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
- CONFIG_USB_GADGET_AT91=y
- CONFIG_USB_AT91=y
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
-@@ -745,17 +796,56 @@
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_MMC is not set
-+# CONFIG_NEW_LEDS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-
- #
--# MMC/SD Card support
-+# RTC interfaces
- #
--# CONFIG_MMC is not set
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-
- #
--# Real Time Clock
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
- #
--CONFIG_RTC_LIB=y
--# CONFIG_RTC_CLASS is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT91SAM9=y
-
- #
- # File systems
-@@ -806,7 +896,6 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
- # CONFIG_CONFIGFS_FS is not set
-
- #
-@@ -825,10 +914,7 @@
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- # CONFIG_NFS_FS is not set
- # CONFIG_NFSD is not set
- # CONFIG_SMB_FS is not set
-@@ -836,17 +922,12 @@
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
- CONFIG_NLS=y
- CONFIG_NLS_DEFAULT="iso8859-1"
- CONFIG_NLS_CODEPAGE_437=y
-@@ -887,41 +968,49 @@
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- # CONFIG_NLS_UTF8 is not set
--
--#
--# Profiling support
--#
-+# CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
- # CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
--# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -932,18 +1021,21 @@
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- # CONFIG_CRYPTO is not set
-
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig linux-2.6/arch/arm/configs/at91sam9261ek_defconfig
---- linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91sam9261ek_defconfig 2008-01-08 22:21:57.000000000 +0200
-@@ -1,43 +1,56 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.19-rc6
--# Fri Nov 17 18:00:38 2006
-+# Linux kernel version: 2.6.24-rc7
-+# Tue Jan 8 22:21:49 2008
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_UTS_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -53,30 +66,30 @@
- CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
--CONFIG_SLAB=y
- CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--# CONFIG_SLOB is not set
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -108,12 +121,16 @@
- # CONFIG_ARCH_NETX is not set
- # CONFIG_ARCH_H720X is not set
- # CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
--# CONFIG_ARCH_IXP4XX is not set
--# CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -121,14 +138,27 @@
- # CONFIG_ARCH_S3C2410 is not set
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
- # CONFIG_ARCH_OMAP is not set
-
- #
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
- # Atmel AT91 System-on-Chip
- #
- # CONFIG_ARCH_AT91RM9200 is not set
- # CONFIG_ARCH_AT91SAM9260 is not set
- CONFIG_ARCH_AT91SAM9261=y
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+# CONFIG_ARCH_AT91X40 is not set
-+CONFIG_AT91_PMC_UNIT=y
-
- #
- # AT91SAM9261 Board Type
-@@ -138,12 +168,15 @@
- #
- # AT91 Board Options
- #
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
- # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-
- #
- # AT91 Feature Selections
- #
--# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-+# CONFIG_ATMEL_TCLIB is not set
-+CONFIG_AT91_TIMER_HZ=100
-
- #
- # Processor Type
-@@ -166,19 +199,19 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--
--#
--# PCCARD (PCMCIA/CardBus) support
--#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- # CONFIG_PCCARD is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_TICK_ONESHOT is not set
- # CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
- CONFIG_HZ=100
-@@ -191,8 +224,12 @@
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -203,6 +240,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -228,7 +266,7 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-
- #
- # Networking
-@@ -238,13 +276,13 @@
- #
- # Networking options
- #
--# CONFIG_NETDEBUG is not set
- CONFIG_PACKET=y
- # CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
- # CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -266,30 +304,20 @@
- CONFIG_INET_XFRM_MODE_TRANSPORT=y
- CONFIG_INET_XFRM_MODE_TUNNEL=y
- CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_INET6_XFRM_TUNNEL is not set
- # CONFIG_INET6_TUNNEL is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
--
--#
--# DCCP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_DCCP is not set
--
--#
--# SCTP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_SCTP is not set
--
--#
--# TIPC Configuration (EXPERIMENTAL)
--#
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
- # CONFIG_BRIDGE is not set
-@@ -302,10 +330,6 @@
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
-
- #
-@@ -315,7 +339,17 @@
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -324,20 +358,14 @@
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
--
--#
--# Memory Technology Devices (MTD)
--#
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
- # CONFIG_MTD_CONCAT is not set
-@@ -350,12 +378,14 @@
- # User Modules And Translation Layers
- #
- # CONFIG_MTD_CHAR is not set
-+CONFIG_MTD_BLKDEVS=y
- CONFIG_MTD_BLOCK=y
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -375,7 +405,6 @@
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
--# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
- #
- # Mapping drivers for chip access
-@@ -386,6 +415,8 @@
- #
- # Self-contained MTD device drivers
- #
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -397,35 +428,24 @@
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
--
--#
--# NAND Flash Device Drivers
--#
- CONFIG_MTD_NAND=y
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
- # CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_DISKONCHIP is not set
- CONFIG_MTD_NAND_AT91=y
- # CONFIG_MTD_NAND_NANDSIM is not set
--
--#
--# OneNAND Flash Device Drivers
--#
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
- # CONFIG_MTD_ONENAND is not set
-
- #
--# Parallel port support
-+# UBI - Unsorted block images
- #
-+# CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- # CONFIG_BLK_DEV_LOOP is not set
- # CONFIG_BLK_DEV_NBD is not set
-@@ -434,15 +454,19 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=y
-
- #
- # SCSI device support
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
-@@ -462,6 +486,8 @@
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-
- #
- # SCSI Transports
-@@ -469,75 +495,49 @@
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
--# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
--
--#
--# SCSI low-level drivers
--#
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
-+# CONFIG_ATA is not set
- # CONFIG_MD is not set
--
--#
--# Fusion MPT device support
--#
--# CONFIG_FUSION is not set
--
--#
--# IEEE 1394 (FireWire) support
--#
--
--#
--# I2O device support
--#
--
--#
--# Network device support
--#
- CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
--
--#
--# PHY device support
--#
-+# CONFIG_VETH is not set
- # CONFIG_PHYLIB is not set
--
--#
--# Ethernet (10 or 100Mbit)
--#
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+# CONFIG_AX88796 is not set
- # CONFIG_SMC91X is not set
- CONFIG_DM9000=y
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-
- #
--# Ethernet (1000 Mbit)
--#
--
--#
--# Ethernet (10000 Mbit)
--#
--
--#
--# Token Ring devices
-+# Wireless LAN
- #
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-
- #
--# Wireless LAN (non-hamradio)
--#
--# CONFIG_NET_RADIO is not set
--
--#
--# Wan interfaces
-+# USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
- # CONFIG_WAN is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-@@ -545,10 +545,6 @@
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
-@@ -556,6 +552,7 @@
- #
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-
- #
- # Userland interfaces
-@@ -565,23 +562,43 @@
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_TSDEV is not set
- # CONFIG_INPUT_EVDEV is not set
- # CONFIG_INPUT_EVBUG is not set
-
- #
- # Input Device Drivers
- #
--# CONFIG_INPUT_KEYBOARD is not set
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=y
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
--# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
- # CONFIG_INPUT_MISC is not set
-
- #
- # Hardware I/O ports
- #
--# CONFIG_SERIO is not set
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+# CONFIG_SERIO_RAW is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -609,75 +626,47 @@
- CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--
--#
--# Watchdog Cards
--#
--CONFIG_WATCHDOG=y
--CONFIG_WATCHDOG_NOWAYOUT=y
--
--#
--# Watchdog Device Drivers
--#
--# CONFIG_SOFT_WATCHDOG is not set
--
--#
--# USB-based Watchdog Cards
--#
--# CONFIG_USBPCWATCHDOG is not set
- CONFIG_HW_RANDOM=y
- # CONFIG_NVRAM is not set
--# CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
--
--#
--# Ftape, the floppy tape device driver
--#
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--
--#
--# I2C support
--#
- CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=y
-
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
- # CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
- # CONFIG_I2C_PCA is not set
--# CONFIG_I2C_PCA_ISA is not set
-
- #
- # Miscellaneous I2C Chip support
- #
- # CONFIG_SENSORS_DS1337 is not set
- # CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_SENSORS_PCA9539 is not set
- # CONFIG_SENSORS_PCF8591 is not set
- # CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
-@@ -686,70 +675,125 @@
- #
- # SPI support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-
- #
--# Dallas's 1-wire bus
-+# SPI Master Controller Drivers
- #
--# CONFIG_W1 is not set
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-
- #
--# Hardware Monitoring support
-+# SPI Protocol Masters
- #
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
--# CONFIG_HWMON_VID is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-
- #
--# Misc devices
-+# Watchdog Device Drivers
- #
--# CONFIG_TIFM_CORE is not set
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT91SAM9_WATCHDOG=y
-
- #
--# LED devices
-+# USB-based Watchdog Cards
- #
--# CONFIG_NEW_LEDS is not set
-+# CONFIG_USBPCWATCHDOG is not set
-
- #
--# LED drivers
-+# Sonics Silicon Backplane
- #
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
--# LED Triggers
-+# Multifunction device drivers
- #
-+# CONFIG_MFD_SM501 is not set
-
- #
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
--
--#
--# Digital Video Broadcasting Devices
--#
--# CONFIG_DVB is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
- # CONFIG_USB_DABUSB is not set
-
- #
- # Graphics support
- #
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
- # CONFIG_FIRMWARE_EDID is not set
--# CONFIG_FB is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D15605 is not set
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_INTSRAM is not set
-+# CONFIG_FB_ATMEL_STN is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-
- #
- # Console display driver support
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-
- #
- # Sound
- #
- # CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-
- #
--# USB support
-+# USB Input Devices
- #
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
- # CONFIG_USB_ARCH_HAS_EHCI is not set
-@@ -760,7 +804,7 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
-+CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -769,9 +813,11 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-
- #
- # USB Device Class drivers
-@@ -790,6 +836,7 @@
- CONFIG_USB_STORAGE_DEBUG=y
- # CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
- # CONFIG_USB_STORAGE_DPCM is not set
- # CONFIG_USB_STORAGE_USBAT is not set
- # CONFIG_USB_STORAGE_SDDR09 is not set
-@@ -800,43 +847,10 @@
- # CONFIG_USB_LIBUSUAL is not set
-
- #
--# USB Input Devices
--#
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
--# CONFIG_USB_AIPTEK is not set
--# CONFIG_USB_WACOM is not set
--# CONFIG_USB_ACECAD is not set
--# CONFIG_USB_KBTAB is not set
--# CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_TOUCHSCREEN is not set
--# CONFIG_USB_YEALINK is not set
--# CONFIG_USB_XPAD is not set
--# CONFIG_USB_ATI_REMOTE is not set
--# CONFIG_USB_ATI_REMOTE2 is not set
--# CONFIG_USB_KEYSPAN_REMOTE is not set
--# CONFIG_USB_APPLETOUCH is not set
--
--#
- # USB Imaging devices
- #
- # CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
--
--#
--# USB Network Adapters
--#
--# CONFIG_USB_CATC is not set
--# CONFIG_USB_KAWETH is not set
--# CONFIG_USB_PEGASUS is not set
--# CONFIG_USB_RTL8150 is not set
--# CONFIG_USB_USBNET_MII is not set
--# CONFIG_USB_USBNET is not set
- CONFIG_USB_MON=y
-
- #
-@@ -858,6 +872,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -867,6 +882,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -877,13 +893,19 @@
- # USB Gadget Support
- #
- CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
- # CONFIG_USB_GADGET_NET2280 is not set
- # CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
- # CONFIG_USB_GADGET_GOKU is not set
- # CONFIG_USB_GADGET_LH7A40X is not set
- # CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
- CONFIG_USB_GADGET_AT91=y
- CONFIG_USB_AT91=y
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
-@@ -895,21 +917,73 @@
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
--# MMC/SD Card support
-+# MMC/SD Card Drivers
- #
--CONFIG_MMC=y
--# CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
--CONFIG_MMC_AT91=m
--# CONFIG_MMC_TIFM_SD is not set
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-
- #
--# Real Time Clock
-+# MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_AT91=y
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_NEW_LEDS is not set
- CONFIG_RTC_LIB=y
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT91SAM9=y
-
- #
- # File systems
-@@ -960,7 +1034,6 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
- # CONFIG_CONFIGFS_FS is not set
-
- #
-@@ -973,7 +1046,6 @@
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
--# CONFIG_JFFS_FS is not set
- # CONFIG_JFFS2_FS is not set
- CONFIG_CRAMFS=y
- # CONFIG_VXFS_FS is not set
-@@ -981,10 +1053,7 @@
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- # CONFIG_NFS_FS is not set
- # CONFIG_NFSD is not set
- # CONFIG_SMB_FS is not set
-@@ -992,17 +1061,12 @@
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
- CONFIG_NLS=y
- CONFIG_NLS_DEFAULT="iso8859-1"
- CONFIG_NLS_CODEPAGE_437=y
-@@ -1043,41 +1107,49 @@
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- # CONFIG_NLS_UTF8 is not set
--
--#
--# Profiling support
--#
-+# CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
- # CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
--# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1088,18 +1160,21 @@
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- # CONFIG_CRYPTO is not set
-
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig linux-2.6/arch/arm/configs/at91sam9263ek_defconfig
---- linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91sam9263ek_defconfig 2008-01-08 22:12:41.000000000 +0200
-@@ -1,12 +1,18 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.20-rc1
--# Mon Jan 8 16:06:54 2007
-+# Linux kernel version: 2.6.24-rc7
-+# Tue Jan 8 22:12:20 2008
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
-@@ -15,32 +21,36 @@
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_UTS_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -56,32 +66,30 @@
- CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
--CONFIG_SLAB=y
- CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--# CONFIG_SLOB is not set
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
- # CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
- # CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -113,13 +121,16 @@
- # CONFIG_ARCH_NETX is not set
- # CONFIG_ARCH_H720X is not set
- # CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
--# CONFIG_ARCH_IOP13XX is not set
--# CONFIG_ARCH_IXP4XX is not set
--# CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -127,15 +138,27 @@
- # CONFIG_ARCH_S3C2410 is not set
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
- # CONFIG_ARCH_OMAP is not set
-
- #
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
- # Atmel AT91 System-on-Chip
- #
- # CONFIG_ARCH_AT91RM9200 is not set
- # CONFIG_ARCH_AT91SAM9260 is not set
- # CONFIG_ARCH_AT91SAM9261 is not set
- CONFIG_ARCH_AT91SAM9263=y
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+# CONFIG_ARCH_AT91X40 is not set
-+CONFIG_AT91_PMC_UNIT=y
-
- #
- # AT91SAM9263 Board Type
-@@ -152,6 +175,8 @@
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-+CONFIG_AT91_TIMER_HZ=100
-
- #
- # Processor Type
-@@ -174,19 +199,19 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--
--#
--# PCCARD (PCMCIA/CardBus) support
--#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- # CONFIG_PCCARD is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_TICK_ONESHOT is not set
- # CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
- CONFIG_HZ=100
-@@ -199,8 +224,12 @@
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -211,6 +240,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -236,7 +266,7 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-
- #
- # Networking
-@@ -246,7 +276,6 @@
- #
- # Networking options
- #
--# CONFIG_NETDEBUG is not set
- CONFIG_PACKET=y
- # CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
-@@ -271,6 +300,7 @@
- # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
- # CONFIG_INET_XFRM_MODE_TUNNEL is not set
- # CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
- # CONFIG_INET_DIAG is not set
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
-@@ -281,20 +311,8 @@
- # CONFIG_INET6_TUNNEL is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
--
--#
--# DCCP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_DCCP is not set
--
--#
--# SCTP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_SCTP is not set
--
--#
--# TIPC Configuration (EXPERIMENTAL)
--#
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
- # CONFIG_BRIDGE is not set
-@@ -307,10 +325,6 @@
- # CONFIG_LAPB is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
-
- #
-@@ -320,7 +334,17 @@
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -329,20 +353,14 @@
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
--
--#
--# Memory Technology Devices (MTD)
--#
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
- # CONFIG_MTD_CONCAT is not set
-@@ -362,6 +380,7 @@
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -381,7 +400,6 @@
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
--# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
- #
- # Mapping drivers for chip access
-@@ -405,35 +423,24 @@
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
--
--#
--# NAND Flash Device Drivers
--#
- CONFIG_MTD_NAND=y
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
- # CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_DISKONCHIP is not set
- CONFIG_MTD_NAND_AT91=y
- # CONFIG_MTD_NAND_NANDSIM is not set
--
--#
--# OneNAND Flash Device Drivers
--#
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
- # CONFIG_MTD_ONENAND is not set
-
- #
--# Parallel port support
-+# UBI - Unsorted block images
- #
-+# CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -443,15 +450,18 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=y
-
- #
- # SCSI device support
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
- # CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-@@ -473,6 +483,7 @@
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
- # CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-
- #
- # SCSI Transports
-@@ -480,80 +491,65 @@
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
--# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
--
--#
--# SCSI low-level drivers
--#
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
--
--#
--# Serial ATA (prod) and Parallel ATA (experimental) drivers
--#
- # CONFIG_ATA is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
- # CONFIG_MD is not set
--
--#
--# Fusion MPT device support
--#
--# CONFIG_FUSION is not set
--
--#
--# IEEE 1394 (FireWire) support
--#
--
--#
--# I2O device support
--#
--
--#
--# Network device support
--#
- CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-
- #
--# PHY device support
--#
--# CONFIG_PHYLIB is not set
--
--#
--# Ethernet (10 or 100Mbit)
-+# MII PHY device drivers
- #
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_AX88796 is not set
- # CONFIG_SMC91X is not set
- # CONFIG_DM9000 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+CONFIG_NETDEV_1000=y
-+CONFIG_NETDEV_10000=y
-
- #
--# Ethernet (1000 Mbit)
--#
--
--#
--# Ethernet (10000 Mbit)
--#
--
--#
--# Token Ring devices
--#
--
--#
--# Wireless LAN (non-hamradio)
-+# Wireless LAN
- #
--# CONFIG_NET_RADIO is not set
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-
- #
--# Wan interfaces
-+# USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
- # CONFIG_WAN is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-@@ -561,10 +557,6 @@
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
-@@ -572,6 +564,7 @@
- #
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-
- #
- # Userland interfaces
-@@ -581,20 +574,26 @@
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--CONFIG_INPUT_TSDEV=y
--CONFIG_INPUT_TSDEV_SCREEN_X=240
--CONFIG_INPUT_TSDEV_SCREEN_Y=320
- CONFIG_INPUT_EVDEV=y
- # CONFIG_INPUT_EVBUG is not set
-
- #
- # Input Device Drivers
- #
--# CONFIG_INPUT_KEYBOARD is not set
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=y
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
- CONFIG_INPUT_TOUCHSCREEN=y
- CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
- # CONFIG_TOUCHSCREEN_GUNZE is not set
- # CONFIG_TOUCHSCREEN_ELO is not set
- # CONFIG_TOUCHSCREEN_MTOUCH is not set
-@@ -603,6 +602,7 @@
- # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
- # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
- # CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
- # CONFIG_INPUT_MISC is not set
-
- #
-@@ -636,71 +636,47 @@
- CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--
--#
--# Watchdog Cards
--#
--CONFIG_WATCHDOG=y
--CONFIG_WATCHDOG_NOWAYOUT=y
--
--#
--# Watchdog Device Drivers
--#
--# CONFIG_SOFT_WATCHDOG is not set
--
--#
--# USB-based Watchdog Cards
--#
--# CONFIG_USBPCWATCHDOG is not set
- CONFIG_HW_RANDOM=y
- # CONFIG_NVRAM is not set
--# CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--
--#
--# I2C support
--#
- CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=y
-
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
- # CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
- # CONFIG_I2C_PCA is not set
--# CONFIG_I2C_PCA_ISA is not set
-
- #
- # Miscellaneous I2C Chip support
- #
- # CONFIG_SENSORS_DS1337 is not set
- # CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_SENSORS_PCA9539 is not set
- # CONFIG_SENSORS_PCF8591 is not set
- # CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
-@@ -722,61 +698,80 @@
- #
- # SPI Protocol Masters
- #
--
--#
--# Dallas's 1-wire bus
--#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
- # CONFIG_W1 is not set
--
--#
--# Hardware Monitoring support
--#
-+# CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
--# CONFIG_HWMON_VID is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-
- #
--# Misc devices
-+# Watchdog Device Drivers
- #
--# CONFIG_TIFM_CORE is not set
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT91SAM9_WATCHDOG=y
-
- #
--# LED devices
-+# USB-based Watchdog Cards
- #
--# CONFIG_NEW_LEDS is not set
-+# CONFIG_USBPCWATCHDOG is not set
-
- #
--# LED drivers
-+# Sonics Silicon Backplane
- #
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
--# LED Triggers
-+# Multifunction device drivers
- #
-+# CONFIG_MFD_SM501 is not set
-
- #
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
--
--#
--# Digital Video Broadcasting Devices
--#
--# CONFIG_DVB is not set
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
- CONFIG_FB=y
--# CONFIG_FB_CFB_FILLRECT is not set
--# CONFIG_FB_CFB_COPYAREA is not set
--# CONFIG_FB_CFB_IMAGEBLIT is not set
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
- # CONFIG_FB_MACMODES is not set
- # CONFIG_FB_BACKLIGHT is not set
- # CONFIG_FB_MODE_HELPERS is not set
- # CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D15605 is not set
- # CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
- # CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-
- #
- # Console display driver support
-@@ -784,26 +779,28 @@
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
- # CONFIG_FRAMEBUFFER_CONSOLE is not set
--
--#
--# Logo configuration
--#
- # CONFIG_LOGO is not set
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
- #
- # CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-
- #
--# HID Devices
-+# USB Input Devices
- #
--CONFIG_HID=y
-+# CONFIG_USB_HID is not set
-
- #
--# USB support
-+# USB HID Boot Protocol drivers
- #
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
- # CONFIG_USB_ARCH_HAS_EHCI is not set
-@@ -814,9 +811,8 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
-+CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
--# CONFIG_USB_MULTITHREAD_PROBE is not set
- # CONFIG_USB_OTG is not set
-
- #
-@@ -824,9 +820,11 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-
- #
- # USB Device Class drivers
-@@ -845,6 +843,7 @@
- # CONFIG_USB_STORAGE_DEBUG is not set
- # CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
- # CONFIG_USB_STORAGE_DPCM is not set
- # CONFIG_USB_STORAGE_USBAT is not set
- # CONFIG_USB_STORAGE_SDDR09 is not set
-@@ -856,43 +855,10 @@
- # CONFIG_USB_LIBUSUAL is not set
-
- #
--# USB Input Devices
--#
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
--# CONFIG_USB_AIPTEK is not set
--# CONFIG_USB_WACOM is not set
--# CONFIG_USB_ACECAD is not set
--# CONFIG_USB_KBTAB is not set
--# CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_TOUCHSCREEN is not set
--# CONFIG_USB_YEALINK is not set
--# CONFIG_USB_XPAD is not set
--# CONFIG_USB_ATI_REMOTE is not set
--# CONFIG_USB_ATI_REMOTE2 is not set
--# CONFIG_USB_KEYSPAN_REMOTE is not set
--# CONFIG_USB_APPLETOUCH is not set
--
--#
- # USB Imaging devices
- #
- # CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
--
--#
--# USB Network Adapters
--#
--# CONFIG_USB_CATC is not set
--# CONFIG_USB_KAWETH is not set
--# CONFIG_USB_PEGASUS is not set
--# CONFIG_USB_RTL8150 is not set
--# CONFIG_USB_USBNET_MII is not set
--# CONFIG_USB_USBNET is not set
- CONFIG_USB_MON=y
-
- #
-@@ -914,6 +880,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -923,6 +890,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -933,13 +901,19 @@
- # USB Gadget Support
- #
- CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
- # CONFIG_USB_GADGET_NET2280 is not set
- # CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
- # CONFIG_USB_GADGET_GOKU is not set
- # CONFIG_USB_GADGET_LH7A40X is not set
- # CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
- CONFIG_USB_GADGET_AT91=y
- CONFIG_USB_AT91=y
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
-@@ -951,21 +925,73 @@
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
--# MMC/SD Card support
-+# MMC/SD Card Drivers
- #
--CONFIG_MMC=y
--# CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
--CONFIG_MMC_AT91=m
--# CONFIG_MMC_TIFM_SD is not set
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-
- #
--# Real Time Clock
-+# MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_AT91=m
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_NEW_LEDS is not set
- CONFIG_RTC_LIB=y
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT91SAM9=y
-
- #
- # File systems
-@@ -1016,7 +1042,6 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
- # CONFIG_CONFIGFS_FS is not set
-
- #
-@@ -1032,10 +1057,12 @@
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
- CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- CONFIG_CRAMFS=y
-@@ -1044,10 +1071,7 @@
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- CONFIG_NFS_FS=y
- # CONFIG_NFS_V3 is not set
- # CONFIG_NFS_V4 is not set
-@@ -1057,6 +1081,7 @@
- CONFIG_LOCKD=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
- # CONFIG_SMB_FS is not set
-@@ -1064,17 +1089,12 @@
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
- CONFIG_NLS=y
- CONFIG_NLS_DEFAULT="iso8859-1"
- CONFIG_NLS_CODEPAGE_437=y
-@@ -1115,36 +1135,35 @@
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- # CONFIG_NLS_UTF8 is not set
--
--#
--# Distributed Lock Manager
--#
- # CONFIG_DLM is not set
--
--#
--# Profiling support
--#
-+CONFIG_INSTRUMENTATION=y
- # CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -1152,9 +1171,13 @@
- # CONFIG_DEBUG_INFO is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1165,10 +1188,7 @@
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- # CONFIG_CRYPTO is not set
-
- #
-@@ -1177,8 +1197,13 @@
- CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
- CONFIG_PLIST=y
--CONFIG_IOMAP_COPY=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig linux-2.6/arch/arm/configs/at91sam9rlek_defconfig
---- linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/at91sam9rlek_defconfig 2008-01-08 22:24:22.000000000 +0200
-@@ -1,15 +1,18 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.21
--# Mon May 7 16:30:40 2007
-+# Linux kernel version: 2.6.24-rc7
-+# Tue Jan 8 22:24:14 2008
- #
- CONFIG_ARM=y
- CONFIG_SYS_SUPPORTS_APM_EMULATION=y
- CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
- CONFIG_MMU=y
- # CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
-@@ -23,27 +26,28 @@
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
- CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_UTS_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
- CONFIG_BLK_DEV_INITRD=y
-@@ -62,32 +66,30 @@
- CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
--CONFIG_SLAB=y
- CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--# CONFIG_SLOB is not set
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
- # CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
- # CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -119,14 +121,16 @@
- # CONFIG_ARCH_NETX is not set
- # CONFIG_ARCH_H720X is not set
- # CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
--# CONFIG_ARCH_IOP13XX is not set
--# CONFIG_ARCH_IXP4XX is not set
--# CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
- # CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -134,9 +138,18 @@
- # CONFIG_ARCH_S3C2410 is not set
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
- # CONFIG_ARCH_OMAP is not set
-
- #
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
- # Atmel AT91 System-on-Chip
- #
- # CONFIG_ARCH_AT91RM9200 is not set
-@@ -144,6 +157,8 @@
- # CONFIG_ARCH_AT91SAM9261 is not set
- # CONFIG_ARCH_AT91SAM9263 is not set
- CONFIG_ARCH_AT91SAM9RL=y
-+# CONFIG_ARCH_AT91X40 is not set
-+CONFIG_AT91_PMC_UNIT=y
-
- #
- # AT91SAM9RL Board Type
-@@ -157,7 +172,9 @@
- #
- # AT91 Feature Selections
- #
--# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-+# CONFIG_ATMEL_TCLIB is not set
-+CONFIG_AT91_TIMER_HZ=100
-
- #
- # Processor Type
-@@ -185,15 +202,14 @@
- #
- # Bus support
- #
--
--#
--# PCCARD (PCMCIA/CardBus) support
--#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- # CONFIG_PCCARD is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_TICK_ONESHOT is not set
- # CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
- CONFIG_HZ=100
-@@ -206,9 +222,12 @@
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -245,6 +264,7 @@
- # Power management options
- #
- # CONFIG_PM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-
- #
- # Networking
-@@ -254,7 +274,6 @@
- #
- # Networking options
- #
--# CONFIG_NETDEBUG is not set
- # CONFIG_PACKET is not set
- CONFIG_UNIX=y
- # CONFIG_NET_KEY is not set
-@@ -271,10 +290,6 @@
- # CONFIG_X25 is not set
- # CONFIG_LAPB is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
-
- #
-@@ -284,7 +299,16 @@
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -293,21 +317,14 @@
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
- # CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
--
--#
--# Memory Technology Devices (MTD)
--#
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
- CONFIG_MTD_CONCAT=y
-@@ -327,6 +344,7 @@
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -346,7 +364,6 @@
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
--# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
- #
- # Mapping drivers for chip access
-@@ -370,36 +387,23 @@
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
--
--#
--# NAND Flash Device Drivers
--#
- CONFIG_MTD_NAND=y
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
- # CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_DISKONCHIP is not set
- CONFIG_MTD_NAND_AT91=y
- # CONFIG_MTD_NAND_NANDSIM is not set
--
--#
--# OneNAND Flash Device Drivers
--#
-+# CONFIG_MTD_NAND_PLATFORM is not set
- # CONFIG_MTD_ONENAND is not set
-
- #
--# Parallel port support
-+# UBI - Unsorted block images
- #
-+# CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--# CONFIG_PNPACPI is not set
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -410,12 +414,16 @@
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=y
-
- #
- # SCSI device support
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
- # CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-@@ -437,6 +445,7 @@
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
- # CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-
- #
- # SCSI Transports
-@@ -444,47 +453,13 @@
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
--# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
--
--#
--# SCSI low-level drivers
--#
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_SCSI_DEBUG is not set
--
--#
--# Serial ATA (prod) and Parallel ATA (experimental) drivers
--#
- # CONFIG_ATA is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
- # CONFIG_MD is not set
--
--#
--# Fusion MPT device support
--#
--# CONFIG_FUSION is not set
--
--#
--# IEEE 1394 (FireWire) support
--#
--
--#
--# I2O device support
--#
--
--#
--# Network device support
--#
- # CONFIG_NETDEVICES is not set
--# CONFIG_NETPOLL is not set
--# CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
-@@ -492,6 +467,7 @@
- #
- CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-
- #
- # Userland interfaces
-@@ -501,7 +477,6 @@
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_TSDEV is not set
- CONFIG_INPUT_EVDEV=y
- # CONFIG_INPUT_EVBUG is not set
-
-@@ -511,8 +486,10 @@
- # CONFIG_INPUT_KEYBOARD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
- CONFIG_INPUT_TOUCHSCREEN=y
- # CONFIG_TOUCHSCREEN_ADS7846 is not set
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
- # CONFIG_TOUCHSCREEN_GUNZE is not set
- # CONFIG_TOUCHSCREEN_ELO is not set
- # CONFIG_TOUCHSCREEN_MTOUCH is not set
-@@ -521,6 +498,7 @@
- # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
- # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
- # CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
- # CONFIG_INPUT_MISC is not set
-
- #
-@@ -554,37 +532,50 @@
- CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--
--#
--# Watchdog Cards
--#
--CONFIG_WATCHDOG=y
--CONFIG_WATCHDOG_NOWAYOUT=y
--
--#
--# Watchdog Device Drivers
--#
--# CONFIG_SOFT_WATCHDOG is not set
--CONFIG_HW_RANDOM=y
-+# CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
--# CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--
--#
--# I2C support
--#
--# CONFIG_I2C is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=y
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_GPIO=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_PCA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
- # SPI support
-@@ -603,21 +594,25 @@
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--
--#
--# Dallas's 1-wire bus
--#
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
- # CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-
- #
--# Hardware Monitoring support
-+# Watchdog Device Drivers
- #
--# CONFIG_HWMON is not set
--# CONFIG_HWMON_VID is not set
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT91SAM9_WATCHDOG=y
-
- #
--# Misc devices
-+# Sonics Silicon Backplane
- #
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
- # Multifunction device drivers
-@@ -625,37 +620,28 @@
- # CONFIG_MFD_SM501 is not set
-
- #
--# LED devices
--#
--# CONFIG_NEW_LEDS is not set
--
--#
--# LED drivers
--#
--
--#
--# LED Triggers
--#
--
--#
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
--
--#
--# Digital Video Broadcasting Devices
--#
-+# CONFIG_DAB is not set
-
- #
- # Graphics support
- #
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
- CONFIG_FB=y
- # CONFIG_FIRMWARE_EDID is not set
- # CONFIG_FB_DDC is not set
- CONFIG_FB_CFB_FILLRECT=y
- CONFIG_FB_CFB_COPYAREA=y
- CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
- # CONFIG_FB_SVGALIB is not set
- # CONFIG_FB_MACMODES is not set
- # CONFIG_FB_BACKLIGHT is not set
-@@ -665,9 +651,16 @@
- #
- # Frame buffer hardware drivers
- #
-+# CONFIG_FB_S1D15605 is not set
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
- # CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-
- #
- # Console display driver support
-@@ -675,97 +668,97 @@
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
- # CONFIG_FRAMEBUFFER_CONSOLE is not set
--
--#
--# Logo configuration
--#
- # CONFIG_LOGO is not set
-
- #
- # Sound
- #
--CONFIG_SOUND=y
--
--#
--# Advanced Linux Sound Architecture
--#
--CONFIG_SND=y
--CONFIG_SND_TIMER=y
--CONFIG_SND_PCM=y
--CONFIG_SND_SEQUENCER=y
--CONFIG_SND_SEQ_DUMMY=y
--CONFIG_SND_OSSEMUL=y
--CONFIG_SND_MIXER_OSS=y
--CONFIG_SND_PCM_OSS=y
--CONFIG_SND_PCM_OSS_PLUGINS=y
--CONFIG_SND_SEQUENCER_OSS=y
--# CONFIG_SND_DYNAMIC_MINORS is not set
--CONFIG_SND_SUPPORT_OLD_API=y
--CONFIG_SND_VERBOSE_PROCFS=y
--CONFIG_SND_VERBOSE_PRINTK=y
--CONFIG_SND_DEBUG=y
--CONFIG_SND_DEBUG_DETECT=y
--# CONFIG_SND_PCM_XRUN_DEBUG is not set
--
--#
--# Generic devices
--#
--# CONFIG_SND_DUMMY is not set
--# CONFIG_SND_VIRMIDI is not set
--# CONFIG_SND_MTPAV is not set
--# CONFIG_SND_SERIAL_U16550 is not set
--# CONFIG_SND_MPU401 is not set
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+# CONFIG_USB is not set
-
- #
--# ALSA ARM devices
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
-
- #
--# SoC audio support
-+# USB Gadget Support
- #
--# CONFIG_SND_SOC is not set
-+# CONFIG_USB_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
--# Open Sound System
-+# MMC/SD Card Drivers
- #
--# CONFIG_SOUND_PRIME is not set
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-
- #
--# HID Devices
-+# MMC/SD Host Controller Drivers
- #
--CONFIG_HID=y
--# CONFIG_HID_DEBUG is not set
-+CONFIG_MMC_AT91=y
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_NEW_LEDS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-
- #
--# USB support
-+# RTC interfaces
- #
--CONFIG_USB_ARCH_HAS_HCD=y
--CONFIG_USB_ARCH_HAS_OHCI=y
--# CONFIG_USB_ARCH_HAS_EHCI is not set
--# CONFIG_USB is not set
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-
- #
--# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+# I2C RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-
- #
--# USB Gadget Support
-+# SPI RTC drivers
- #
--# CONFIG_USB_GADGET is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-
- #
--# MMC/SD Card support
-+# Platform RTC drivers
- #
--CONFIG_MMC=y
--# CONFIG_MMC_DEBUG is not set
--CONFIG_MMC_BLOCK=y
--CONFIG_MMC_AT91=y
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-
- #
--# Real Time Clock
-+# on-CPU RTC drivers
- #
--CONFIG_RTC_LIB=y
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_DRV_AT91SAM9=y
-
- #
- # File systems
-@@ -816,7 +809,6 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
- # CONFIG_CONFIGFS_FS is not set
-
- #
-@@ -836,20 +828,13 @@
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
- CONFIG_NLS=y
- CONFIG_NLS_DEFAULT="iso8859-1"
- CONFIG_NLS_CODEPAGE_437=y
-@@ -890,16 +875,15 @@
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=y
--
--#
--# Profiling support
--#
-+CONFIG_INSTRUMENTATION=y
- # CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-@@ -907,8 +891,8 @@
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
--CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
-@@ -916,6 +900,9 @@
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -923,10 +910,13 @@
- CONFIG_DEBUG_INFO=y
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
- # CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -937,10 +927,7 @@
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- # CONFIG_CRYPTO is not set
-
- #
-@@ -949,9 +936,12 @@
- CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/ateb9200_defconfig linux-2.6/arch/arm/configs/ateb9200_defconfig
---- linux-2.6.24/arch/arm/configs/ateb9200_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/ateb9200_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -714,7 +714,7 @@
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=m
-+CONFIG_I2C_GPIO=m
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
- # CONFIG_I2C_PCA_ISA is not set
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/cam60_defconfig linux-2.6/arch/arm/configs/cam60_defconfig
---- linux-2.6.24/arch/arm/configs/cam60_defconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/configs/cam60_defconfig 2008-01-11 09:36:44.000000000 +0200
-@@ -0,0 +1,1217 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.23
-+# Wed Jan 9 22:44:49 2008
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+CONFIG_AUDIT=y
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_RELAY=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+CONFIG_KALLSYMS_ALL=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+CONFIG_BLK_DEV_IO_TRACE=y
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+CONFIG_ARCH_AT91SAM9260=y
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+
-+#
-+# AT91SAM9260 Variants
-+#
-+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-+
-+#
-+# AT91SAM9260 / AT91SAM9XE Board Type
-+#
-+# CONFIG_MACH_AT91SAM9260EK is not set
-+CONFIG_MACH_CAM60=y
-+# CONFIG_MACH_SAM9_L9260 is not set
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-+CONFIG_AT91_TIMER_HZ=100
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+CONFIG_PCCARD=m
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=m
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
-+
-+#
-+# PC-card bridges
-+#
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_TICK_ONESHOT is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0
-+CONFIG_ZBOOT_ROM_BSS=0x20004000
-+# CONFIG_ZBOOT_ROM is not set
-+CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-+# CONFIG_XIP_KERNEL is not set
-+CONFIG_KEXEC=y
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+CONFIG_BINFMT_AOUT=y
-+CONFIG_BINFMT_MISC=y
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+CONFIG_NETWORK_SECMARK=y
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+CONFIG_NET_SCH_FIFO=y
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+CONFIG_CFG80211=m
-+CONFIG_WIRELESS_EXT=y
-+CONFIG_MAC80211=m
-+# CONFIG_MAC80211_DEBUGFS is not set
-+# CONFIG_MAC80211_DEBUG is not set
-+CONFIG_IEEE80211=m
-+# CONFIG_IEEE80211_DEBUG is not set
-+CONFIG_IEEE80211_CRYPT_WEP=m
-+CONFIG_IEEE80211_CRYPT_CCMP=m
-+CONFIG_IEEE80211_CRYPT_TKIP=m
-+CONFIG_IEEE80211_SOFTMAC=m
-+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=m
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_RAM=m
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+CONFIG_MTD_PLATRAM=m
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+CONFIG_MTD_BLOCK2MTD=y
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_VERIFY_WRITE=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+CONFIG_SCSI_TGT=y
-+CONFIG_SCSI_NETLINK=y
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+CONFIG_CHR_DEV_SG=y
-+CONFIG_CHR_DEV_SCH=y
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+CONFIG_SCSI_LOGGING=y
-+CONFIG_SCSI_SCAN_ASYNC=y
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+CONFIG_SCSI_SPI_ATTRS=m
-+CONFIG_SCSI_FC_ATTRS=m
-+CONFIG_SCSI_ISCSI_ATTRS=m
-+CONFIG_SCSI_SAS_ATTRS=m
-+CONFIG_SCSI_SAS_LIBSAS=m
-+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+CONFIG_MARVELL_PHY=m
-+CONFIG_DAVICOM_PHY=m
-+CONFIG_QSEMI_PHY=m
-+CONFIG_LXT_PHY=m
-+CONFIG_CICADA_PHY=m
-+CONFIG_VITESSE_PHY=m
-+CONFIG_SMSC_PHY=m
-+CONFIG_BROADCOM_PHY=m
-+# CONFIG_ICPLUS_PHY is not set
-+CONFIG_FIXED_PHY=m
-+# CONFIG_FIXED_MII_10_FDX is not set
-+# CONFIG_FIXED_MII_100_FDX is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=m
-+CONFIG_MACB=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_NET_PCMCIA is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+CONFIG_KEYBOARD_ATKBD=y
-+CONFIG_KEYBOARD_SUNKBD=m
-+CONFIG_KEYBOARD_LKKBD=m
-+CONFIG_KEYBOARD_XTKBD=m
-+CONFIG_KEYBOARD_NEWTON=m
-+CONFIG_KEYBOARD_STOWAWAY=m
-+# CONFIG_KEYBOARD_GPIO is not set
-+CONFIG_INPUT_MOUSE=y
-+CONFIG_MOUSE_PS2=y
-+CONFIG_MOUSE_PS2_ALPS=y
-+CONFIG_MOUSE_PS2_LOGIPS2PP=y
-+CONFIG_MOUSE_PS2_SYNAPTICS=y
-+CONFIG_MOUSE_PS2_LIFEBOOK=y
-+CONFIG_MOUSE_PS2_TRACKPOINT=y
-+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-+CONFIG_MOUSE_SERIAL=m
-+CONFIG_MOUSE_APPLETOUCH=m
-+CONFIG_MOUSE_VSXXXAA=m
-+# CONFIG_MOUSE_GPIO is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+# CONFIG_SERIO_SERPORT is not set
-+CONFIG_SERIO_LIBPS2=y
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+CONFIG_VT_HW_CONSOLE_BINDING=y
-+CONFIG_SERIAL_NONSTANDARD=y
-+# CONFIG_MOXA_SMARTIO is not set
-+# CONFIG_N_HDLC is not set
-+# CONFIG_RISCOM8 is not set
-+# CONFIG_SPECIALIX is not set
-+# CONFIG_RIO is not set
-+# CONFIG_STALDRV is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_WATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=y
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_AT91 is not set
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_PCA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_MISC_DEVICES is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+# CONFIG_MMC is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-+CONFIG_RTC_DRV_TEST=m
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT91SAM9=y
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+CONFIG_EXT2_FS_XATTR=y
-+CONFIG_EXT2_FS_POSIX_ACL=y
-+# CONFIG_EXT2_FS_SECURITY is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+CONFIG_FS_POSIX_ACL=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QFMT_V1 is not set
-+# CONFIG_QFMT_V2 is not set
-+CONFIG_QUOTACTL=y
-+CONFIG_DNOTIFY=y
-+CONFIG_AUTOFS_FS=y
-+CONFIG_AUTOFS4_FS=y
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="cp437"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+CONFIG_NLS_ASCII=y
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_UNUSED_SYMBOLS=y
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_FORCED_INLINING is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_DEBUG_ERRORS is not set
-+# CONFIG_DEBUG_LL is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ABLKCIPHER=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=y
-+CONFIG_CRYPTO_XCBC=m
-+CONFIG_CRYPTO_NULL=m
-+CONFIG_CRYPTO_MD4=m
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=m
-+CONFIG_CRYPTO_SHA256=m
-+CONFIG_CRYPTO_SHA512=m
-+CONFIG_CRYPTO_WP512=m
-+CONFIG_CRYPTO_TGR192=m
-+CONFIG_CRYPTO_GF128MUL=m
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=m
-+CONFIG_CRYPTO_PCBC=m
-+CONFIG_CRYPTO_LRW=m
-+CONFIG_CRYPTO_CRYPTD=m
-+CONFIG_CRYPTO_DES=m
-+CONFIG_CRYPTO_FCRYPT=m
-+CONFIG_CRYPTO_BLOWFISH=m
-+CONFIG_CRYPTO_TWOFISH=m
-+CONFIG_CRYPTO_TWOFISH_COMMON=m
-+CONFIG_CRYPTO_SERPENT=m
-+CONFIG_CRYPTO_AES=m
-+CONFIG_CRYPTO_CAST5=m
-+CONFIG_CRYPTO_CAST6=m
-+CONFIG_CRYPTO_TEA=m
-+CONFIG_CRYPTO_ARC4=m
-+CONFIG_CRYPTO_KHAZAD=m
-+CONFIG_CRYPTO_ANUBIS=m
-+CONFIG_CRYPTO_DEFLATE=m
-+CONFIG_CRYPTO_MICHAEL_MIC=m
-+CONFIG_CRYPTO_CRC32C=m
-+CONFIG_CRYPTO_CAMELLIA=m
-+CONFIG_CRYPTO_TEST=m
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=m
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb337_defconfig linux-2.6/arch/arm/configs/csb337_defconfig
---- linux-2.6.24/arch/arm/configs/csb337_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/csb337_defconfig 2008-01-09 22:19:31.000000000 +0200
-@@ -1,69 +1,96 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.15
--# Mon Jan 9 21:51:31 2006
-+# Linux kernel version: 2.6.24-rc7
-+# Wed Jan 9 22:19:24 2008
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- CONFIG_MMU=y
--CONFIG_UID16=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
--CONFIG_CLEAN_COMPILE=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- CONFIG_LOCALVERSION_AUTO=y
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
--CONFIG_SYSCTL=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
--CONFIG_HOTPLUG=y
--CONFIG_KOBJECT_UEVENT=y
- # CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
- # CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
- CONFIG_KALLSYMS=y
- # CONFIG_KALLSYMS_ALL is not set
- # CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
--CONFIG_CC_ALIGN_FUNCTIONS=0
--CONFIG_CC_ALIGN_LABELS=0
--CONFIG_CC_ALIGN_LOOPS=0
--CONFIG_CC_ALIGN_JUMPS=0
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
--CONFIG_OBSOLETE_MODPARM=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -81,62 +108,101 @@
- #
- # System Type
- #
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
- # CONFIG_ARCH_CLPS7500 is not set
- # CONFIG_ARCH_CLPS711X is not set
- # CONFIG_ARCH_CO285 is not set
- # CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
- # CONFIG_ARCH_FOOTBRIDGE is not set
--# CONFIG_ARCH_INTEGRATOR is not set
--# CONFIG_ARCH_IOP3XX is not set
--# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
- # CONFIG_ARCH_SA1100 is not set
- # CONFIG_ARCH_S3C2410 is not set
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
- # CONFIG_ARCH_OMAP is not set
--# CONFIG_ARCH_VERSATILE is not set
--# CONFIG_ARCH_REALVIEW is not set
--# CONFIG_ARCH_IMX is not set
--# CONFIG_ARCH_H720X is not set
--# CONFIG_ARCH_AAEC2000 is not set
--CONFIG_ARCH_AT91=y
--CONFIG_ARCH_AT91RM9200=y
-
- #
--# AT91RM9200 Implementations
-+# Boot options
- #
-
- #
-+# Power management
-+#
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+CONFIG_ARCH_AT91RM9200=y
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+# CONFIG_ARCH_AT91X40 is not set
-+CONFIG_AT91_PMC_UNIT=y
-+
-+#
- # AT91RM9200 Board Type
- #
-+# CONFIG_MACH_ONEARM is not set
- # CONFIG_ARCH_AT91RM9200DK is not set
- # CONFIG_MACH_AT91RM9200EK is not set
- CONFIG_MACH_CSB337=y
- # CONFIG_MACH_CSB637 is not set
- # CONFIG_MACH_CARMEVA is not set
--# CONFIG_MACH_KB9200 is not set
- # CONFIG_MACH_ATEB9200 is not set
-+# CONFIG_MACH_KB9200 is not set
-+# CONFIG_MACH_PICOTUX2XX is not set
-+# CONFIG_MACH_KAFA is not set
-+# CONFIG_MACH_CHUB is not set
-+# CONFIG_MACH_HOMEMATIC is not set
-+# CONFIG_MACH_ECBAT91 is not set
-+# CONFIG_MACH_SWEDATMS is not set
-
- #
--# AT91RM9200 Feature Selections
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
- #
- CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-+# CONFIG_ATMEL_TCLIB is not set
-+CONFIG_AT91_TIMER_HZ=128
-
- #
- # Processor Type
- #
- CONFIG_CPU_32=y
- CONFIG_CPU_ARM920T=y
--CONFIG_CPU_32v4=y
-+CONFIG_CPU_32v4T=y
- CONFIG_CPU_ABRT_EV4T=y
- CONFIG_CPU_CACHE_V4WT=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_COPY_V4WB=y
- CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-
- #
- # Processor Features
-@@ -145,15 +211,13 @@
- # CONFIG_CPU_ICACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--CONFIG_ISA_DMA_API=y
--
--#
--# PCCARD (PCMCIA/CardBus) support
--#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
- CONFIG_PCCARD=y
- # CONFIG_PCMCIA_DEBUG is not set
- CONFIG_PCMCIA=y
-@@ -168,8 +232,13 @@
- #
- # Kernel Features
- #
-+# CONFIG_TICK_ONESHOT is not set
-+# CONFIG_NO_HZ is not set
-+# CONFIG_HIGH_RES_TIMERS is not set
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- # CONFIG_PREEMPT is not set
--# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=128
-+# CONFIG_AEABI is not set
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
-@@ -178,9 +247,13 @@
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- CONFIG_LEDS=y
--CONFIG_LEDS_TIMER=y
- CONFIG_LEDS_CPU=y
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -191,6 +264,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -215,6 +289,7 @@
- # Power management options
- #
- # CONFIG_PM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-
- #
- # Networking
-@@ -227,6 +302,10 @@
- CONFIG_PACKET=y
- # CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -243,23 +322,26 @@
- # CONFIG_INET_AH is not set
- # CONFIG_INET_ESP is not set
- # CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
- # CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
--CONFIG_TCP_CONG_BIC=y
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
--
--#
--# DCCP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_DCCP is not set
--
--#
--# SCTP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
- # CONFIG_ATM is not set
- # CONFIG_BRIDGE is not set
- # CONFIG_VLAN_8021Q is not set
-@@ -269,13 +351,8 @@
- # CONFIG_ATALK is not set
- # CONFIG_X25 is not set
- # CONFIG_LAPB is not set
--# CONFIG_NET_DIVERT is not set
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
- # CONFIG_NET_SCHED is not set
-
- #
-@@ -285,7 +362,17 @@
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -294,19 +381,14 @@
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
- # CONFIG_DEBUG_DRIVER is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
- # CONFIG_CONNECTOR is not set
--
--#
--# Memory Technology Devices (MTD)
--#
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
- # CONFIG_MTD_CONCAT is not set
-@@ -319,11 +401,14 @@
- # User Modules And Translation Layers
- #
- CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
- CONFIG_MTD_BLOCK=y
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -349,15 +434,14 @@
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
--# CONFIG_MTD_XIP is not set
-
- #
- # Mapping drivers for chip access
- #
- # CONFIG_MTD_COMPLEX_MAPPINGS is not set
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=0
--CONFIG_MTD_PHYSMAP_LEN=0
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x0
- CONFIG_MTD_PHYSMAP_BANKWIDTH=0
- # CONFIG_MTD_ARM_INTEGRATOR is not set
- # CONFIG_MTD_PLATRAM is not set
-@@ -368,7 +452,6 @@
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
--# CONFIG_MTD_BLKMTD is not set
- # CONFIG_MTD_BLOCK2MTD is not set
-
- #
-@@ -378,29 +461,15 @@
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
- # CONFIG_MTD_AT91_DATAFLASH is not set
--
--#
--# NAND Flash Device Drivers
--#
- # CONFIG_MTD_NAND is not set
--
--#
--# OneNAND Flash Device Drivers
--#
- # CONFIG_MTD_ONENAND is not set
-
- #
--# Parallel port support
-+# UBI - Unsorted block images
- #
-+# CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -409,13 +478,12 @@
- CONFIG_BLK_DEV_RAM=y
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
--CONFIG_BLK_DEV_INITRD=y
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
--
--#
--# ATA/ATAPI/MFM/RLL support
--#
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=y
- # CONFIG_IDE is not set
-
- #
-@@ -423,6 +491,9 @@
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
- #
-@@ -441,97 +512,61 @@
- # CONFIG_SCSI_MULTI_LUN is not set
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-
- #
--# SCSI Transport Attributes
-+# SCSI Transports
- #
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
--# CONFIG_SCSI_SAS_ATTRS is not set
--
--#
--# SCSI low-level drivers
--#
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
--# CONFIG_SCSI_SATA is not set
- # CONFIG_SCSI_DEBUG is not set
--
--#
--# PCMCIA SCSI adapter support
--#
--# CONFIG_PCMCIA_AHA152X is not set
--# CONFIG_PCMCIA_FDOMAIN is not set
--# CONFIG_PCMCIA_NINJA_SCSI is not set
--# CONFIG_PCMCIA_QLOGIC is not set
--# CONFIG_PCMCIA_SYM53C500 is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
-+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-+# CONFIG_ATA is not set
- # CONFIG_MD is not set
--
--#
--# Fusion MPT device support
--#
--# CONFIG_FUSION is not set
--
--#
--# IEEE 1394 (FireWire) support
--#
--
--#
--# I2O device support
--#
--
--#
--# Network device support
--#
- CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
--
--#
--# PHY device support
--#
-+# CONFIG_VETH is not set
- # CONFIG_PHYLIB is not set
--
--#
--# Ethernet (10 or 100Mbit)
--#
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
- CONFIG_ARM_AT91_ETHER=y
-+# CONFIG_AX88796 is not set
- # CONFIG_SMC91X is not set
- # CONFIG_DM9000 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+CONFIG_NETDEV_1000=y
-+CONFIG_NETDEV_10000=y
-
- #
--# Ethernet (1000 Mbit)
--#
--
--#
--# Ethernet (10000 Mbit)
--#
--
--#
--# Token Ring devices
-+# Wireless LAN
- #
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-
- #
--# Wireless LAN (non-hamradio)
--#
--# CONFIG_NET_RADIO is not set
--
--#
--# PCMCIA network device support
-+# USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
- # CONFIG_NET_PCMCIA is not set
--
--#
--# Wan interfaces
--#
- # CONFIG_WAN is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-@@ -539,26 +574,23 @@
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
- # Input device support
- #
- CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-
- #
- # Userland interfaces
- #
- CONFIG_INPUT_MOUSEDEV=y
--CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_TSDEV is not set
- # CONFIG_INPUT_EVDEV is not set
- # CONFIG_INPUT_EVBUG is not set
-
-@@ -568,6 +600,7 @@
- # CONFIG_INPUT_KEYBOARD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
- # CONFIG_INPUT_TOUCHSCREEN is not set
- # CONFIG_INPUT_MISC is not set
-
-@@ -583,6 +616,7 @@
- CONFIG_VT=y
- CONFIG_VT_CONSOLE=y
- CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -601,152 +635,114 @@
- CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--
--#
--# Watchdog Cards
--#
--CONFIG_WATCHDOG=y
--CONFIG_WATCHDOG_NOWAYOUT=y
--
--#
--# Watchdog Device Drivers
--#
--# CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT91RM9200_WATCHDOG=y
--
--#
--# USB-based Watchdog Cards
--#
--# CONFIG_USBPCWATCHDOG is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
--# CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
-
- #
--# Ftape, the floppy tape device driver
--#
--
--#
- # PCMCIA character devices
- #
- # CONFIG_SYNCLINK_CS is not set
- # CONFIG_CARDMAN_4000 is not set
- # CONFIG_CARDMAN_4040 is not set
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--# CONFIG_TELCLOCK is not set
- CONFIG_AT91_SPI=y
- CONFIG_AT91_SPIDEV=y
--
--#
--# I2C support
--#
- CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=y
-
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
-+# CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
- # CONFIG_I2C_STUB is not set
--# CONFIG_I2C_PCA_ISA is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_PCA is not set
-
- #
- # Miscellaneous I2C Chip support
- #
- # CONFIG_SENSORS_DS1337 is not set
- # CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_SENSORS_PCA9539 is not set
- # CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_RTC8564 is not set
- # CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_RTC_X1205_I2C is not set
-+# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
- # CONFIG_I2C_DEBUG_CHIP is not set
-
- #
--# Hardware Monitoring support
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
- #
--CONFIG_HWMON=y
--# CONFIG_HWMON_VID is not set
--# CONFIG_SENSORS_ADM1021 is not set
--# CONFIG_SENSORS_ADM1025 is not set
--# CONFIG_SENSORS_ADM1026 is not set
--# CONFIG_SENSORS_ADM1031 is not set
--# CONFIG_SENSORS_ADM9240 is not set
--# CONFIG_SENSORS_ASB100 is not set
--# CONFIG_SENSORS_ATXP1 is not set
--# CONFIG_SENSORS_DS1621 is not set
--# CONFIG_SENSORS_FSCHER is not set
--# CONFIG_SENSORS_FSCPOS is not set
--# CONFIG_SENSORS_GL518SM is not set
--# CONFIG_SENSORS_GL520SM is not set
--# CONFIG_SENSORS_IT87 is not set
--# CONFIG_SENSORS_LM63 is not set
--# CONFIG_SENSORS_LM75 is not set
--# CONFIG_SENSORS_LM77 is not set
--# CONFIG_SENSORS_LM78 is not set
--# CONFIG_SENSORS_LM80 is not set
--# CONFIG_SENSORS_LM83 is not set
--# CONFIG_SENSORS_LM85 is not set
--# CONFIG_SENSORS_LM87 is not set
--# CONFIG_SENSORS_LM90 is not set
--# CONFIG_SENSORS_LM92 is not set
--# CONFIG_SENSORS_MAX1619 is not set
--# CONFIG_SENSORS_PC87360 is not set
--# CONFIG_SENSORS_SMSC47M1 is not set
--# CONFIG_SENSORS_SMSC47B397 is not set
--# CONFIG_SENSORS_W83781D is not set
--# CONFIG_SENSORS_W83792D is not set
--# CONFIG_SENSORS_W83L785TS is not set
--# CONFIG_SENSORS_W83627HF is not set
--# CONFIG_SENSORS_W83627EHF is not set
--# CONFIG_HWMON_DEBUG_CHIP is not set
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT91RM9200_WATCHDOG=y
-
- #
--# Misc devices
-+# USB-based Watchdog Cards
- #
-+# CONFIG_USBPCWATCHDOG is not set
-
- #
--# Multimedia Capabilities Port drivers
-+# Sonics Silicon Backplane
- #
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-
- #
--# Multimedia devices
-+# Multifunction device drivers
- #
--# CONFIG_VIDEO_DEV is not set
-+# CONFIG_MFD_SM501 is not set
-
- #
--# Digital Video Broadcasting Devices
-+# Multimedia devices
- #
--# CONFIG_DVB is not set
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-
- #
- # Graphics support
- #
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
- # CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-
- #
- # Console display driver support
-@@ -758,12 +754,25 @@
- # Sound
- #
- # CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+CONFIG_HID_DEBUG=y
-+# CONFIG_HIDRAW is not set
-
- #
--# USB support
-+# USB Input Devices
- #
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
- CONFIG_USB=y
- CONFIG_USB_DEBUG=y
-
-@@ -771,7 +780,7 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
-+CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -780,9 +789,11 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-
- #
- # USB Device Class drivers
-@@ -801,59 +812,21 @@
- # CONFIG_USB_STORAGE_DEBUG is not set
- # CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
- # CONFIG_USB_STORAGE_DPCM is not set
- # CONFIG_USB_STORAGE_USBAT is not set
- # CONFIG_USB_STORAGE_SDDR09 is not set
- # CONFIG_USB_STORAGE_SDDR55 is not set
- # CONFIG_USB_STORAGE_JUMPSHOT is not set
--
--#
--# USB Input Devices
--#
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
--# CONFIG_USB_AIPTEK is not set
--# CONFIG_USB_WACOM is not set
--# CONFIG_USB_ACECAD is not set
--# CONFIG_USB_KBTAB is not set
--# CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_MTOUCH is not set
--# CONFIG_USB_ITMTOUCH is not set
--# CONFIG_USB_EGALAX is not set
--# CONFIG_USB_YEALINK is not set
--# CONFIG_USB_XPAD is not set
--# CONFIG_USB_ATI_REMOTE is not set
--# CONFIG_USB_KEYSPAN_REMOTE is not set
--# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-
- #
- # USB Imaging devices
- #
- # CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
--
--#
--# USB Multimedia devices
--#
--# CONFIG_USB_DABUSB is not set
--
--#
--# Video4Linux support is needed for USB Multimedia device support
--#
--
--#
--# USB Network Adapters
--#
--# CONFIG_USB_CATC is not set
--# CONFIG_USB_KAWETH is not set
--# CONFIG_USB_PEGASUS is not set
--# CONFIG_USB_RTL8150 is not set
--# CONFIG_USB_USBNET is not set
- CONFIG_USB_MON=y
-
- #
-@@ -866,15 +839,18 @@
- CONFIG_USB_SERIAL=y
- CONFIG_USB_SERIAL_CONSOLE=y
- CONFIG_USB_SERIAL_GENERIC=y
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
- # CONFIG_USB_SERIAL_AIRPRIME is not set
--# CONFIG_USB_SERIAL_ANYDATA is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
- # CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_CH341 is not set
- # CONFIG_USB_SERIAL_WHITEHEAT is not set
- # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
- # CONFIG_USB_SERIAL_CP2101 is not set
- # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
- # CONFIG_USB_SERIAL_EMPEG is not set
- CONFIG_USB_SERIAL_FTDI_SIO=y
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
- # CONFIG_USB_SERIAL_VISOR is not set
- # CONFIG_USB_SERIAL_IPAQ is not set
- # CONFIG_USB_SERIAL_IR is not set
-@@ -899,14 +875,20 @@
- # CONFIG_USB_SERIAL_KLSI is not set
- # CONFIG_USB_SERIAL_KOBIL_SCT is not set
- CONFIG_USB_SERIAL_MCT_U232=y
-+# CONFIG_USB_SERIAL_MOS7720 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
- # CONFIG_USB_SERIAL_PL2303 is not set
-+# CONFIG_USB_SERIAL_OTI6858 is not set
- # CONFIG_USB_SERIAL_HP4X is not set
- # CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
- # CONFIG_USB_SERIAL_TI is not set
- # CONFIG_USB_SERIAL_CYBERJACK is not set
- # CONFIG_USB_SERIAL_XIRCOM is not set
- # CONFIG_USB_SERIAL_OPTION is not set
- # CONFIG_USB_SERIAL_OMNINET is not set
-+# CONFIG_USB_SERIAL_DEBUG is not set
- CONFIG_USB_EZUSB=y
-
- #
-@@ -914,16 +896,22 @@
- #
- # CONFIG_USB_EMI62 is not set
- # CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
- # CONFIG_USB_AUERSWALD is not set
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGETKIT is not set
--# CONFIG_USB_PHIDGETSERVO is not set
-+# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -934,13 +922,19 @@
- # USB Gadget Support
- #
- CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
- # CONFIG_USB_GADGET_NET2280 is not set
- # CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
- # CONFIG_USB_GADGET_GOKU is not set
- # CONFIG_USB_GADGET_LH7A40X is not set
- # CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
- CONFIG_USB_GADGET_AT91=y
- CONFIG_USB_AT91=y
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
-@@ -950,22 +944,28 @@
- # CONFIG_USB_GADGETFS is not set
- # CONFIG_USB_FILE_STORAGE is not set
- # CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
--# MMC/SD Card support
-+# MMC/SD Card Drivers
- #
--CONFIG_MMC=y
--# CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
--CONFIG_MMC_AT91RM9200=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-
- #
--# Real Time Clock
-+# MMC/SD Host Controller Drivers
- #
-+# CONFIG_MMC_AT91 is not set
-+# CONFIG_NEW_LEDS is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
- CONFIG_RTC_HCTOSYS=y
- CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-+# CONFIG_RTC_DEBUG is not set
-
- #
- # RTC interfaces
-@@ -974,39 +974,60 @@
- CONFIG_RTC_INTF_PROC=y
- CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-
- #
--# RTC drivers
-+# I2C RTC drivers
- #
--# CONFIG_RTC_DRV_X1205 is not set
- CONFIG_RTC_DRV_DS1307=y
--# CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
- # CONFIG_RTC_DRV_DS1672 is not set
--# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
--# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
--CONFIG_RTC_DRV_AT91RM9200=y
--# CONFIG_RTC_DRV_TEST is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-
- #
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT91RM9200=y
-+
-+#
- # File systems
- #
- CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
- # CONFIG_EXT3_FS is not set
--# CONFIG_JBD is not set
-+# CONFIG_EXT4DEV_FS is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
- # CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
- CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- CONFIG_DNOTIFY=y
- # CONFIG_AUTOFS_FS is not set
-@@ -1030,11 +1051,12 @@
- # Pseudo filesystems
- #
- CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
- CONFIG_SYSFS=y
- CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
--# CONFIG_RELAYFS_FS is not set
-+# CONFIG_CONFIGFS_FS is not set
-
- #
- # Miscellaneous filesystems
-@@ -1046,7 +1068,6 @@
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
--# CONFIG_JFFS_FS is not set
- # CONFIG_JFFS2_FS is not set
- CONFIG_CRAMFS=y
- # CONFIG_VXFS_FS is not set
-@@ -1054,10 +1075,7 @@
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
-@@ -1070,6 +1088,7 @@
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
- CONFIG_SUNRPC_GSS=y
-+# CONFIG_SUNRPC_BIND34 is not set
- CONFIG_RPCSEC_GSS_KRB5=y
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
- # CONFIG_SMB_FS is not set
-@@ -1077,43 +1096,56 @@
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
- #
- # CONFIG_PARTITION_ADVANCED is not set
- CONFIG_MSDOS_PARTITION=y
--
--#
--# Native Language Support
--#
- # CONFIG_NLS is not set
--
--#
--# Profiling support
--#
-+# CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
- # CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
--CONFIG_DEBUG_KERNEL=y
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
--# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1124,12 +1156,13 @@
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_MANAGER=y
- # CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
- # CONFIG_CRYPTO_NULL is not set
- # CONFIG_CRYPTO_MD4 is not set
- CONFIG_CRYPTO_MD5=y
-@@ -1138,7 +1171,15 @@
- # CONFIG_CRYPTO_SHA512 is not set
- # CONFIG_CRYPTO_WP512 is not set
- # CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
- # CONFIG_CRYPTO_BLOWFISH is not set
- # CONFIG_CRYPTO_TWOFISH is not set
- # CONFIG_CRYPTO_SERPENT is not set
-@@ -1149,20 +1190,27 @@
- # CONFIG_CRYPTO_ARC4 is not set
- # CONFIG_CRYPTO_KHAZAD is not set
- # CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
- # CONFIG_CRYPTO_DEFLATE is not set
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--
--#
--# Hardware crypto devices
--#
-+# CONFIG_CRYPTO_AUTHENC is not set
-+CONFIG_CRYPTO_HW=y
-
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb637_defconfig linux-2.6/arch/arm/configs/csb637_defconfig
---- linux-2.6.24/arch/arm/configs/csb637_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/csb637_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -658,14 +658,14 @@
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
- # CONFIG_I2C_PCA_ISA is not set
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/ecbat91_defconfig linux-2.6/arch/arm/configs/ecbat91_defconfig
---- linux-2.6.24/arch/arm/configs/ecbat91_defconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/configs/ecbat91_defconfig 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,1315 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.22-rc4
-+# Sat Jun 9 01:30:18 2007
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+# CONFIG_IOSCHED_DEADLINE is not set
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+CONFIG_ARCH_AT91RM9200=y
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+
-+#
-+# AT91RM9200 Board Type
-+#
-+# CONFIG_MACH_ONEARM is not set
-+# CONFIG_ARCH_AT91RM9200DK is not set
-+# CONFIG_MACH_AT91RM9200EK is not set
-+# CONFIG_MACH_CSB337 is not set
-+# CONFIG_MACH_CSB637 is not set
-+# CONFIG_MACH_CARMEVA is not set
-+# CONFIG_MACH_ATEB9200 is not set
-+# CONFIG_MACH_KB9200 is not set
-+# CONFIG_MACH_PICOTUX2XX is not set
-+# CONFIG_MACH_KAFA is not set
-+# CONFIG_MACH_CHUB is not set
-+CONFIG_MACH_ECBAT91=y
-+
-+#
-+# AT91 Board Options
-+#
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-+
-+#
-+# AT91 Feature Selections
-+#
-+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-+# CONFIG_ATMEL_TCLIB is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM920T=y
-+CONFIG_CPU_32v4T=y
-+CONFIG_CPU_ABRT_EV4T=y
-+CONFIG_CPU_CACHE_V4WT=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+CONFIG_PCCARD=y
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=y
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
-+
-+#
-+# PC-card bridges
-+#
-+CONFIG_AT91_CF=y
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_TICK_ONESHOT is not set
-+CONFIG_PREEMPT=y
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_LEDS=y
-+CONFIG_LEDS_TIMER=y
-+CONFIG_LEDS_CPU=y
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+CONFIG_NET_SCH_FIFO=y
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+CONFIG_CFG80211=y
-+CONFIG_WIRELESS_EXT=y
-+CONFIG_MAC80211=y
-+# CONFIG_MAC80211_DEBUG is not set
-+CONFIG_IEEE80211=y
-+# CONFIG_IEEE80211_DEBUG is not set
-+CONFIG_IEEE80211_CRYPT_WEP=y
-+# CONFIG_IEEE80211_CRYPT_CCMP is not set
-+# CONFIG_IEEE80211_CRYPT_TKIP is not set
-+CONFIG_IEEE80211_SOFTMAC=y
-+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-+# CONFIG_RFKILL is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+# CONFIG_STANDALONE is not set
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+CONFIG_FW_LOADER=y
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+CONFIG_MTD_AFS_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+CONFIG_CHR_DEV_SG=y
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# PCMCIA SCSI adapter support
-+#
-+# CONFIG_PCMCIA_AHA152X is not set
-+# CONFIG_PCMCIA_FDOMAIN is not set
-+# CONFIG_PCMCIA_NINJA_SCSI is not set
-+# CONFIG_PCMCIA_QLOGIC is not set
-+# CONFIG_PCMCIA_SYM53C500 is not set
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_ARM_AT91_ETHER=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_NET_PCMCIA is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=y
-+CONFIG_PPP_MULTILINK=y
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=y
-+# CONFIG_PPP_SYNC_TTY is not set
-+# CONFIG_PPP_DEFLATE is not set
-+# CONFIG_PPP_BSDCOMP is not set
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=y
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+# CONFIG_AT91RM9200_WATCHDOG is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_AT91_SPI is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=y
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_GPIO=y
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_PCA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_ATMEL is not set
-+CONFIG_SPI_BITBANG=y
-+CONFIG_SPI_AT91=y
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_ABITUGURU is not set
-+# CONFIG_SENSORS_AD7418 is not set
-+# CONFIG_SENSORS_ADM1021 is not set
-+# CONFIG_SENSORS_ADM1025 is not set
-+# CONFIG_SENSORS_ADM1026 is not set
-+# CONFIG_SENSORS_ADM1029 is not set
-+# CONFIG_SENSORS_ADM1031 is not set
-+# CONFIG_SENSORS_ADM9240 is not set
-+# CONFIG_SENSORS_ASB100 is not set
-+# CONFIG_SENSORS_ATXP1 is not set
-+# CONFIG_SENSORS_DS1621 is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_FSCHER is not set
-+# CONFIG_SENSORS_FSCPOS is not set
-+# CONFIG_SENSORS_GL518SM is not set
-+# CONFIG_SENSORS_GL520SM is not set
-+# CONFIG_SENSORS_IT87 is not set
-+# CONFIG_SENSORS_LM63 is not set
-+# CONFIG_SENSORS_LM70 is not set
-+# CONFIG_SENSORS_LM75 is not set
-+# CONFIG_SENSORS_LM77 is not set
-+# CONFIG_SENSORS_LM78 is not set
-+# CONFIG_SENSORS_LM80 is not set
-+# CONFIG_SENSORS_LM83 is not set
-+# CONFIG_SENSORS_LM85 is not set
-+# CONFIG_SENSORS_LM87 is not set
-+# CONFIG_SENSORS_LM90 is not set
-+# CONFIG_SENSORS_LM92 is not set
-+# CONFIG_SENSORS_MAX1619 is not set
-+# CONFIG_SENSORS_MAX6650 is not set
-+# CONFIG_SENSORS_PC87360 is not set
-+# CONFIG_SENSORS_PC87427 is not set
-+# CONFIG_SENSORS_SMSC47M1 is not set
-+# CONFIG_SENSORS_SMSC47M192 is not set
-+# CONFIG_SENSORS_SMSC47B397 is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+# CONFIG_SENSORS_W83781D is not set
-+# CONFIG_SENSORS_W83791D is not set
-+# CONFIG_SENSORS_W83792D is not set
-+# CONFIG_SENSORS_W83793 is not set
-+# CONFIG_SENSORS_W83L785TS is not set
-+# CONFIG_SENSORS_W83627HF is not set
-+# CONFIG_SENSORS_W83627EHF is not set
-+# CONFIG_HWMON_DEBUG_CHIP is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_BLINK is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+# CONFIG_LEDS_TRIGGERS is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
-+# USB Input Devices
-+#
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+CONFIG_USB_PRINTER=y
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+CONFIG_USB_GADGET_AT91=y
-+CONFIG_USB_AT91=y
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+# CONFIG_USB_GADGET_DUALSPEED is not set
-+# CONFIG_USB_ZERO is not set
-+# CONFIG_USB_ETH is not set
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+CONFIG_MMC_DEBUG=y
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_AT91=y
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT91RM9200=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+CONFIG_REISERFS_FS=y
-+# CONFIG_REISERFS_CHECK is not set
-+# CONFIG_REISERFS_PROC_INFO is not set
-+# CONFIG_REISERFS_FS_XATTR is not set
-+# CONFIG_JFS_FS is not set
-+CONFIG_FS_POSIX_ACL=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+# CONFIG_MSDOS_FS is not set
-+# CONFIG_VFAT_FS is not set
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+CONFIG_NFS_V3_ACL=y
-+CONFIG_NFS_V4=y
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_ACL_SUPPORT=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+# CONFIG_NLS_ISO8859_1 is not set
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_FRAME_POINTER=y
-+CONFIG_DEBUG_USER=y
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_MANAGER=y
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=y
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=y
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+CONFIG_CRYPTO_AES=y
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+CONFIG_CRYPTO_ARC4=y
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/homematic_defconfig linux-2.6/arch/arm/configs/homematic_defconfig
---- linux-2.6.24/arch/arm/configs/homematic_defconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/configs/homematic_defconfig 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,1263 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.21.3
-+# Mon Jun 18 12:28:42 2007
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+# CONFIG_SYSFS_DEPRECATED is not set
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+CONFIG_IOSCHED_DEADLINE=y
-+# CONFIG_IOSCHED_CFQ is not set
-+# CONFIG_DEFAULT_AS is not set
-+CONFIG_DEFAULT_DEADLINE=y
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="deadline"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+CONFIG_ARCH_AT91RM9200=y
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+
-+#
-+# AT91RM9200 Board Type
-+#
-+# CONFIG_MACH_ONEARM is not set
-+# CONFIG_ARCH_AT91RM9200DK is not set
-+# CONFIG_MACH_AT91RM9200EK is not set
-+# CONFIG_MACH_CSB337 is not set
-+# CONFIG_MACH_CSB637 is not set
-+# CONFIG_MACH_CARMEVA is not set
-+# CONFIG_MACH_ATEB9200 is not set
-+# CONFIG_MACH_KB9200 is not set
-+# CONFIG_MACH_KAFA is not set
-+# CONFIG_MACH_CHUB is not set
-+CONFIG_MACH_HOMEMATIC=y
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM920T=y
-+CONFIG_CPU_32v4T=y
-+CONFIG_CPU_ABRT_EV4T=y
-+CONFIG_CPU_CACHE_V4WT=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE=""
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+CONFIG_IEEE80211=m
-+# CONFIG_IEEE80211_DEBUG is not set
-+CONFIG_IEEE80211_CRYPT_WEP=m
-+CONFIG_IEEE80211_CRYPT_CCMP=m
-+CONFIG_IEEE80211_CRYPT_TKIP=m
-+CONFIG_IEEE80211_SOFTMAC=m
-+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-+CONFIG_WIRELESS_EXT=y
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_AT91_DATAFLASH=y
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+# CONFIG_BLK_DEV_LOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_ARM_AT91_ETHER=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+CONFIG_NET_RADIO=y
-+# CONFIG_NET_WIRELESS_RTNETLINK is not set
-+
-+#
-+# Obsolete Wireless cards support (pre-802.11)
-+#
-+# CONFIG_STRIP is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-+CONFIG_ZD1211RW=m
-+# CONFIG_ZD1211RW_DEBUG is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+CONFIG_KEYBOARD_ATKBD=y
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_GPIO is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+CONFIG_SERIO_SERPORT=y
-+CONFIG_SERIO_LIBPS2=y
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT91RM9200_WATCHDOG=y
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+CONFIG_AT91_SPI=y
-+# CONFIG_AT91_SPIDEV is not set
-+
-+#
-+# I2C support
-+#
-+CONFIG_I2C=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_AT91 is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_PCA is not set
-+# CONFIG_I2C_PCA_ISA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Misc devices
-+#
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# HID Devices
-+#
-+# CONFIG_HID is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Input Devices
-+#
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_ACECAD is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
-+# CONFIG_USB_XPAD is not set
-+# CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+CONFIG_USB_SERIAL=m
-+# CONFIG_USB_SERIAL_GENERIC is not set
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
-+# CONFIG_USB_SERIAL_AIRPRIME is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
-+# CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_WHITEHEAT is not set
-+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-+# CONFIG_USB_SERIAL_CP2101 is not set
-+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-+# CONFIG_USB_SERIAL_EMPEG is not set
-+CONFIG_USB_SERIAL_FTDI_SIO=m
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
-+# CONFIG_USB_SERIAL_VISOR is not set
-+# CONFIG_USB_SERIAL_IPAQ is not set
-+# CONFIG_USB_SERIAL_IR is not set
-+# CONFIG_USB_SERIAL_EDGEPORT is not set
-+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-+# CONFIG_USB_SERIAL_GARMIN is not set
-+# CONFIG_USB_SERIAL_IPW is not set
-+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-+# CONFIG_USB_SERIAL_KEYSPAN is not set
-+# CONFIG_USB_SERIAL_KLSI is not set
-+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-+# CONFIG_USB_SERIAL_MCT_U232 is not set
-+# CONFIG_USB_SERIAL_MOS7720 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
-+# CONFIG_USB_SERIAL_PL2303 is not set
-+# CONFIG_USB_SERIAL_HP4X is not set
-+# CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-+# CONFIG_USB_SERIAL_TI is not set
-+# CONFIG_USB_SERIAL_CYBERJACK is not set
-+# CONFIG_USB_SERIAL_XIRCOM is not set
-+# CONFIG_USB_SERIAL_OPTION is not set
-+# CONFIG_USB_SERIAL_OMNINET is not set
-+# CONFIG_USB_SERIAL_DEBUG is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=m
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+CONFIG_USB_GADGET_AT91=y
-+CONFIG_USB_AT91=m
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+# CONFIG_USB_GADGET_DUALSPEED is not set
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+CONFIG_USB_FILE_STORAGE_TEST=y
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# File systems
-+#
-+# CONFIG_EXT2_FS is not set
-+# CONFIG_EXT3_FS is not set
-+# CONFIG_EXT4DEV_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_MINIX_FS=y
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_INOTIFY is not set
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_YAFFS_FS=y
-+CONFIG_YAFFS_YAFFS1=y
-+# CONFIG_YAFFS_DOES_ECC is not set
-+CONFIG_YAFFS_YAFFS2=y
-+CONFIG_YAFFS_AUTO_YAFFS2=y
-+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=m
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_DEBUG_USER is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+# CONFIG_CRYPTO_MD5 is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=m
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+CONFIG_CRYPTO_AES=m
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+CONFIG_CRYPTO_MICHAEL_MIC=m
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/kafa_defconfig linux-2.6/arch/arm/configs/kafa_defconfig
---- linux-2.6.24/arch/arm/configs/kafa_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/kafa_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -587,14 +587,14 @@
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=y
-+CONFIG_I2C_GPIO=y
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
- # CONFIG_I2C_PCA_ISA is not set
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/kb9202_defconfig linux-2.6/arch/arm/configs/kb9202_defconfig
---- linux-2.6.24/arch/arm/configs/kb9202_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/kb9202_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -1,19 +1,31 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.13-rc2
--# Sun Aug 14 19:26:59 2005
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:43:14 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
--CONFIG_UID16=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
- # Code maturity level options
- #
--# CONFIG_EXPERIMENTAL is not set
--CONFIG_CLEAN_COMPILE=y
-+CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-
-@@ -21,54 +33,103 @@
- # General setup
- #
- CONFIG_LOCALVERSION=""
--# CONFIG_SWAP is not set
--# CONFIG_SYSVIPC is not set
--# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+CONFIG_AUDIT=y
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
--# CONFIG_AUDIT is not set
--CONFIG_HOTPLUG=y
--# CONFIG_KOBJECT_UEVENT is not set
--# CONFIG_IKCONFIG is not set
- # CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
- CONFIG_KALLSYMS=y
- # CONFIG_KALLSYMS_ALL is not set
--# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
- CONFIG_EPOLL=y
--CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SHMEM=y
--CONFIG_CC_ALIGN_FUNCTIONS=0
--CONFIG_CC_ALIGN_LABELS=0
--CONFIG_CC_ALIGN_LOOPS=0
--CONFIG_CC_ALIGN_JUMPS=0
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-
- #
- # Loadable module support
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--CONFIG_OBSOLETE_MODPARM=y
--# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
- CONFIG_KMOD=y
-
- #
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
- # System Type
- #
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
- # CONFIG_ARCH_CLPS7500 is not set
- # CONFIG_ARCH_CLPS711X is not set
- # CONFIG_ARCH_CO285 is not set
- # CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
- # CONFIG_ARCH_FOOTBRIDGE is not set
--# CONFIG_ARCH_INTEGRATOR is not set
--# CONFIG_ARCH_IOP3XX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
- # CONFIG_ARCH_SA1100 is not set
-@@ -76,34 +137,52 @@
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
- # CONFIG_ARCH_OMAP is not set
--# CONFIG_ARCH_VERSATILE is not set
--# CONFIG_ARCH_IMX is not set
--# CONFIG_ARCH_H720X is not set
--# CONFIG_ARCH_AAEC2000 is not set
--CONFIG_ARCH_AT91=y
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
- CONFIG_ARCH_AT91RM9200=y
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-
- #
--# AT91RM9200 Implementations
-+# AT91RM9200 Board Type
- #
-+# CONFIG_MACH_ONEARM is not set
- # CONFIG_ARCH_AT91RM9200DK is not set
- # CONFIG_MACH_AT91RM9200EK is not set
- # CONFIG_MACH_CSB337 is not set
- # CONFIG_MACH_CSB637 is not set
- # CONFIG_MACH_CARMEVA is not set
-+# CONFIG_MACH_ATEB9200 is not set
- CONFIG_MACH_KB9200=y
-+# CONFIG_MACH_KAFA is not set
-+# CONFIG_MACH_CHUB is not set
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
- #
- CONFIG_CPU_32=y
- CONFIG_CPU_ARM920T=y
--CONFIG_CPU_32v4=y
-+CONFIG_CPU_32v4T=y
- CONFIG_CPU_ABRT_EV4T=y
- CONFIG_CPU_CACHE_V4WT=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_COPY_V4WB=y
- CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-
- #
- # Processor Features
-@@ -112,24 +191,44 @@
- # CONFIG_CPU_ICACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--CONFIG_ISA_DMA_API=y
-
- #
- # PCCARD (PCMCIA/CardBus) support
- #
--# CONFIG_PCCARD is not set
-+CONFIG_PCCARD=m
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=m
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
-+
-+#
-+# PC-card bridges
-+#
-+# CONFIG_AT91_CF is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -138,8 +237,10 @@
- #
- CONFIG_ZBOOT_ROM_TEXT=0x10000000
- CONFIG_ZBOOT_ROM_BSS=0x20040000
--CONFIG_ZBOOT_ROM=y
--CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
-+# CONFIG_ZBOOT_ROM is not set
-+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -150,6 +251,7 @@
- #
- CONFIG_FPE_NWFPE=y
- # CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-
- #
- # Userspace binary formats
-@@ -165,6 +267,96 @@
- # CONFIG_PM is not set
-
- #
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+CONFIG_IP_SCTP=m
-+# CONFIG_SCTP_DBG_MSG is not set
-+# CONFIG_SCTP_DBG_OBJCNT is not set
-+# CONFIG_SCTP_HMAC_NONE is not set
-+# CONFIG_SCTP_HMAC_SHA1 is not set
-+CONFIG_SCTP_HMAC_MD5=y
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
- # Device Drivers
- #
-
-@@ -173,13 +365,95 @@
- #
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
--# CONFIG_FW_LOADER is not set
--CONFIG_DEBUG_DRIVER=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-
- #
- # Memory Technology Devices (MTD)
- #
--# CONFIG_MTD is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-
- #
- # Parallel port support
-@@ -189,6 +463,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -196,28 +471,27 @@
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
--CONFIG_BLK_DEV_NBD=y
-+# CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_UB is not set
- CONFIG_BLK_DEV_RAM=y
- CONFIG_BLK_DEV_RAM_COUNT=16
--CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_INITRD=y
--CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-
- #
--# IO Schedulers
-+# ATA/ATAPI/MFM/RLL support
- #
--CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
--CONFIG_IOSCHED_DEADLINE=y
--CONFIG_IOSCHED_CFQ=y
--# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
-+# CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
- #
-@@ -233,97 +507,61 @@
- #
- # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
- #
--# CONFIG_SCSI_MULTI_LUN is not set
--# CONFIG_SCSI_CONSTANTS is not set
--# CONFIG_SCSI_LOGGING is not set
-+CONFIG_SCSI_MULTI_LUN=y
-+CONFIG_SCSI_CONSTANTS=y
-+CONFIG_SCSI_LOGGING=y
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
--# SCSI Transport Attributes
-+# SCSI Transports
- #
--# CONFIG_SCSI_SPI_ATTRS is not set
-+CONFIG_SCSI_SPI_ATTRS=m
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-
- #
- # SCSI low-level drivers
- #
--# CONFIG_SCSI_SATA is not set
-+# CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
-
- #
--# Multi-device support (RAID and LVM)
--#
--# CONFIG_MD is not set
--
--#
--# Fusion MPT device support
-+# PCMCIA SCSI adapter support
- #
--# CONFIG_FUSION is not set
-+# CONFIG_PCMCIA_AHA152X is not set
-+# CONFIG_PCMCIA_FDOMAIN is not set
-+# CONFIG_PCMCIA_NINJA_SCSI is not set
-+# CONFIG_PCMCIA_QLOGIC is not set
-+# CONFIG_PCMCIA_SYM53C500 is not set
-
- #
--# IEEE 1394 (FireWire) support
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
- #
-+# CONFIG_ATA is not set
-
- #
--# I2O device support
-+# Multi-device support (RAID and LVM)
- #
-+# CONFIG_MD is not set
-
- #
--# Networking support
-+# Fusion MPT device support
- #
--CONFIG_NET=y
-+# CONFIG_FUSION is not set
-
- #
--# Networking options
-+# IEEE 1394 (FireWire) support
- #
--CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
--CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
--CONFIG_INET=y
--CONFIG_IP_MULTICAST=y
--# CONFIG_IP_ADVANCED_ROUTER is not set
--CONFIG_IP_FIB_HASH=y
--CONFIG_IP_PNP=y
--CONFIG_IP_PNP_DHCP=y
--# CONFIG_IP_PNP_BOOTP is not set
--# CONFIG_IP_PNP_RARP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
--# CONFIG_IP_MROUTE is not set
--# CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
--# CONFIG_INET_IPCOMP is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_IP_TCPDIAG is not set
--# CONFIG_IP_TCPDIAG_IPV6 is not set
--# CONFIG_TCP_CONG_ADVANCED is not set
--CONFIG_TCP_CONG_BIC=y
--# CONFIG_IPV6 is not set
--# CONFIG_NETFILTER is not set
--# CONFIG_BRIDGE is not set
--# CONFIG_VLAN_8021Q is not set
--# CONFIG_DECNET is not set
--# CONFIG_LLC2 is not set
--# CONFIG_IPX is not set
--# CONFIG_ATALK is not set
-
- #
--# QoS and/or fair queueing
-+# I2O device support
- #
--# CONFIG_NET_SCHED is not set
--# CONFIG_NET_CLS_ROUTE is not set
-
- #
--# Network testing
-+# Network device support
- #
--# CONFIG_NET_PKTGEN is not set
--# CONFIG_NETPOLL is not set
--# CONFIG_NET_POLL_CONTROLLER is not set
--# CONFIG_HAMRADIO is not set
--# CONFIG_IRDA is not set
--# CONFIG_BT is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-@@ -331,6 +569,11 @@
- # CONFIG_TUN is not set
-
- #
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
-@@ -357,11 +600,20 @@
- # CONFIG_NET_RADIO is not set
-
- #
-+# PCMCIA network device support
-+#
-+# CONFIG_NET_PCMCIA is not set
-+
-+#
- # Wan interfaces
- #
- # CONFIG_WAN is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-
- #
- # ISDN subsystem
-@@ -372,6 +624,7 @@
- # Input device support
- #
- CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-
- #
- # Userland interfaces
-@@ -397,9 +650,7 @@
- #
- # Hardware I/O ports
- #
--CONFIG_SERIO=y
--# CONFIG_SERIO_SERPORT is not set
--# CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -408,6 +659,7 @@
- CONFIG_VT=y
- CONFIG_VT_CONSOLE=y
- CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -420,11 +672,11 @@
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
--CONFIG_LEGACY_PTYS=y
--CONFIG_LEGACY_PTY_COUNT=256
-+# CONFIG_LEGACY_PTYS is not set
-
- #
- # IPMI
-@@ -435,21 +687,23 @@
- # Watchdog Cards
- #
- # CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
--# CONFIG_RTC is not set
--# CONFIG_AT91RM9200_RTC is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
-
- #
--# Ftape, the floppy tape device driver
-+# PCMCIA character devices
- #
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
- # CONFIG_RAW_DRIVER is not set
-
- #
- # TPM devices
- #
--# CONFIG_AT91_SPI is not set
-+# CONFIG_TCG_TPM is not set
-
- #
- # I2C support
-@@ -457,10 +711,50 @@
- # CONFIG_I2C is not set
-
- #
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_ABITUGURU is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_PC87427 is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+CONFIG_HWMON_DEBUG_CHIP=y
-+
-+#
- # Misc devices
- #
-
- #
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
-@@ -469,17 +763,57 @@
- # Digital Video Broadcasting Devices
- #
- # CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-
- #
- # Graphics support
- #
--# CONFIG_FB is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+# CONFIG_LCD_CLASS_DEVICE is not set
-+CONFIG_BACKLIGHT_KB920x=y
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+CONFIG_FB_MODE_HELPERS=y
-+CONFIG_FB_TILEBLITTING=y
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+CONFIG_FB_S1D15605=y
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_VIRTUAL is not set
-
- #
- # Console display driver support
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+# CONFIG_FONT_8x16 is not set
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+CONFIG_FONT_MINI_4x6=y
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_10x18 is not set
-+
-+#
-+# Logo configuration
-+#
-+# CONFIG_LOGO is not set
-
- #
- # Sound
-@@ -487,82 +821,98 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
- CONFIG_USB=y
--CONFIG_USB_DEBUG=y
-+# CONFIG_USB_DEBUG is not set
-
- #
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-
- #
- # USB Host Controller Drivers
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
- #
- # USB Device Class drivers
- #
--# CONFIG_USB_BLUETOOTH_TTY is not set
- # CONFIG_USB_ACM is not set
- # CONFIG_USB_PRINTER is not set
-
- #
--# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
- #
- CONFIG_USB_STORAGE=y
--CONFIG_USB_STORAGE_DEBUG=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
- # CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-
- #
- # USB Input Devices
- #
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
- # CONFIG_USB_AIPTEK is not set
- # CONFIG_USB_WACOM is not set
- # CONFIG_USB_ACECAD is not set
- # CONFIG_USB_KBTAB is not set
- # CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_MTOUCH is not set
--# CONFIG_USB_ITMTOUCH is not set
--# CONFIG_USB_EGALAX is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
- # CONFIG_USB_XPAD is not set
- # CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
- #
-+# CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
-
- #
--# USB Multimedia devices
--#
--# CONFIG_USB_DABUSB is not set
--
--#
--# Video4Linux support is needed for USB Multimedia device support
--#
--
--#
- # USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
- # CONFIG_USB_KAWETH is not set
- # CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
- # CONFIG_USB_USBNET is not set
- # CONFIG_USB_MON is not set
-
-@@ -580,12 +930,23 @@
- #
- # CONFIG_USB_EMI62 is not set
- # CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGETKIT is not set
--# CONFIG_USB_PHIDGETSERVO is not set
-+# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-
- #
- # USB DSL modem support
-@@ -599,36 +960,51 @@
- #
- # MMC/SD Card support
- #
--# CONFIG_MMC is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_AT91=y
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-
- #
- # File systems
- #
- CONFIG_EXT2_FS=y
- CONFIG_EXT2_FS_XATTR=y
--# CONFIG_EXT2_FS_POSIX_ACL is not set
--# CONFIG_EXT2_FS_SECURITY is not set
-+CONFIG_EXT2_FS_POSIX_ACL=y
-+CONFIG_EXT2_FS_SECURITY=y
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
- CONFIG_EXT3_FS_XATTR=y
--# CONFIG_EXT3_FS_POSIX_ACL is not set
--# CONFIG_EXT3_FS_SECURITY is not set
-+CONFIG_EXT3_FS_POSIX_ACL=y
-+CONFIG_EXT3_FS_SECURITY=y
-+# CONFIG_EXT4DEV_FS is not set
- CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--
--#
--# XFS support
--#
-+CONFIG_FS_POSIX_ACL=y
- # CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_QUOTA is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
- CONFIG_DNOTIFY=y
--CONFIG_AUTOFS_FS=y
-+# CONFIG_AUTOFS_FS is not set
- CONFIG_AUTOFS4_FS=y
-+# CONFIG_FUSE_FS is not set
-
- #
- # CD-ROM/DVD Filesystems
-@@ -643,25 +1019,40 @@
- CONFIG_MSDOS_FS=y
- CONFIG_VFAT_FS=y
- CONFIG_FAT_DEFAULT_CODEPAGE=437
--CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
- # CONFIG_NTFS_FS is not set
-
- #
- # Pseudo filesystems
- #
- CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
- CONFIG_SYSFS=y
--CONFIG_DEVPTS_FS_XATTR=y
--# CONFIG_DEVPTS_FS_SECURITY is not set
- CONFIG_TMPFS=y
--# CONFIG_TMPFS_XATTR is not set
-+# CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
- #
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
- # CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
- # CONFIG_HPFS_FS is not set
-@@ -675,16 +1066,23 @@
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
-+CONFIG_NFS_V4=y
-+# CONFIG_NFS_DIRECTIO is not set
- # CONFIG_NFSD is not set
- CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
- # CONFIG_SMB_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-
- #
- # Partition Types
-@@ -734,26 +1132,51 @@
- # CONFIG_NLS_ISO8859_15 is not set
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
--# CONFIG_NLS_UTF8 is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
--# CONFIG_MAGIC_SYSRQ is not set
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
--# CONFIG_DEBUG_SPINLOCK is not set
--# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+CONFIG_DEBUG_SPINLOCK=y
-+# CONFIG_DEBUG_MUTEXES is not set
-+CONFIG_DEBUG_SPINLOCK_SLEEP=y
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_DEBUG_USER=y
--CONFIG_DEBUG_ERRORS=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
- # CONFIG_DEBUG_ICEDCC is not set
-
-@@ -766,7 +1189,43 @@
- #
- # Cryptographic options
- #
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-
- #
- # Hardware crypto devices
-@@ -775,6 +1234,14 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/picotux200_defconfig linux-2.6/arch/arm/configs/picotux200_defconfig
---- linux-2.6.24/arch/arm/configs/picotux200_defconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/configs/picotux200_defconfig 2007-12-31 10:43:35.000000000 +0200
-@@ -727,14 +727,14 @@
- #
- # I2C Algorithms
- #
--# CONFIG_I2C_ALGOBIT is not set
-+CONFIG_I2C_ALGOBIT=m
- # CONFIG_I2C_ALGOPCF is not set
- # CONFIG_I2C_ALGOPCA is not set
-
- #
- # I2C Hardware Bus support
- #
--CONFIG_I2C_AT91=m
-+CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
-diff -urN -x CVS linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig linux-2.6/arch/arm/configs/sam9_l9260_defconfig
---- linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/configs/sam9_l9260_defconfig 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,1098 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.23
-+# Sun Oct 14 02:01:07 2007
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
-+# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+CONFIG_AUDIT=y
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=15
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_MODULES is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+CONFIG_LSF=y
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+CONFIG_ARCH_AT91SAM9260=y
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+# CONFIG_ARCH_AT91SAM9RL is not set
-+
-+#
-+# AT91SAM9260 Variants
-+#
-+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-+
-+#
-+# AT91SAM9260 / AT91SAM9XE Board Type
-+#
-+# CONFIG_MACH_AT91SAM9260EK is not set
-+# CONFIG_MACH_CAM60 is not set
-+CONFIG_MACH_SAM9_L9260=y
-+
-+#
-+# AT91 Board Options
-+#
-+CONFIG_MTD_AT91_DATAFLASH_CARD=y
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_TICK_ONESHOT is not set
-+CONFIG_PREEMPT=y
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_LEDS=y
-+CONFIG_LEDS_TIMER=y
-+CONFIG_LEDS_CPU=y
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_PNP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+# CONFIG_MTD_CMDLINE_PARTS is not set
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+CONFIG_MTD_BLOCK2MTD=y
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+CONFIG_MTD_NAND_PLATFORM=y
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=3
-+CONFIG_MTD_UBI_GLUEBI=y
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# SCSI device support
-+#
-+CONFIG_RAID_ATTRS=y
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+CONFIG_CHR_DEV_SG=y
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+CONFIG_SCSI_CONSTANTS=y
-+CONFIG_SCSI_LOGGING=y
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=16
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+# CONFIG_W1 is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_MISC_DEVICES is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_GPIO=y
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+CONFIG_USB_GADGET_AT91=y
-+CONFIG_USB_AT91=y
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+# CONFIG_USB_GADGET_DUALSPEED is not set
-+# CONFIG_USB_ZERO is not set
-+CONFIG_USB_ETH=y
-+CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+CONFIG_MMC_DEBUG=y
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_AT91=y
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+CONFIG_RTC_DRV_DS1553=y
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+CONFIG_RTC_DRV_DS1742=y
-+CONFIG_RTC_DRV_M48T86=y
-+# CONFIG_RTC_DRV_M48T59 is not set
-+CONFIG_RTC_DRV_V3020=y
-+
-+#
-+# on-CPU RTC drivers
-+#
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+CONFIG_EXT2_FS_XATTR=y
-+CONFIG_EXT2_FS_POSIX_ACL=y
-+CONFIG_EXT2_FS_SECURITY=y
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+CONFIG_EXT3_FS_POSIX_ACL=y
-+CONFIG_EXT3_FS_SECURITY=y
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+CONFIG_FS_POSIX_ACL=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_NFS_DIRECTIO=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+CONFIG_NLS_CODEPAGE_737=y
-+CONFIG_NLS_CODEPAGE_775=y
-+CONFIG_NLS_CODEPAGE_850=y
-+CONFIG_NLS_CODEPAGE_852=y
-+CONFIG_NLS_CODEPAGE_855=y
-+CONFIG_NLS_CODEPAGE_857=y
-+CONFIG_NLS_CODEPAGE_860=y
-+CONFIG_NLS_CODEPAGE_861=y
-+CONFIG_NLS_CODEPAGE_862=y
-+CONFIG_NLS_CODEPAGE_863=y
-+CONFIG_NLS_CODEPAGE_864=y
-+CONFIG_NLS_CODEPAGE_865=y
-+CONFIG_NLS_CODEPAGE_866=y
-+CONFIG_NLS_CODEPAGE_869=y
-+CONFIG_NLS_CODEPAGE_936=y
-+CONFIG_NLS_CODEPAGE_950=y
-+CONFIG_NLS_CODEPAGE_932=y
-+CONFIG_NLS_CODEPAGE_949=y
-+CONFIG_NLS_CODEPAGE_874=y
-+CONFIG_NLS_ISO8859_8=y
-+CONFIG_NLS_CODEPAGE_1250=y
-+CONFIG_NLS_CODEPAGE_1251=y
-+CONFIG_NLS_ASCII=y
-+CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_ISO8859_2=y
-+CONFIG_NLS_ISO8859_3=y
-+CONFIG_NLS_ISO8859_4=y
-+CONFIG_NLS_ISO8859_5=y
-+CONFIG_NLS_ISO8859_6=y
-+CONFIG_NLS_ISO8859_7=y
-+CONFIG_NLS_ISO8859_9=y
-+CONFIG_NLS_ISO8859_13=y
-+CONFIG_NLS_ISO8859_14=y
-+CONFIG_NLS_ISO8859_15=y
-+CONFIG_NLS_KOI8_R=y
-+CONFIG_NLS_KOI8_U=y
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_UNUSED_SYMBOLS=y
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_DEBUG_ERRORS is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig
---- linux-2.6.24/arch/arm/mach-at91/Kconfig 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-03-01 19:29:48.000000000 +0200
-@@ -12,15 +12,28 @@
-
- config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91SAM9261
- bool "AT91SAM9261"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91SAM9263
- bool "AT91SAM9263"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-+
-+config ARCH_AT91CAP9
-+ bool "AT91CAP9"
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-
- config ARCH_AT91X40
- bool "AT91x40"
-@@ -42,7 +55,7 @@
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
-- <http://www.ajeco.fi/products.htm>
-+ <http://www.ajeco.fi/eng/products_e.htm>
-
- config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
-@@ -106,6 +119,32 @@
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-+config MACH_CHUB
-+ bool "Promwad Chub board"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Promwad's Chub board.
-+
-+config MACH_HOMEMATIC
-+ bool "eQ-3 HomeMatic"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using eQ-3's HomeMatic device.
-+ <http://www.eq-3.com>
-+
-+config MACH_ECBAT91
-+ bool "emQbit ECB_AT91 SBC"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using emQbit's ECB_AT91 board.
-+ <http://wiki.emqbit.com/free-ecb-at91>
-+
-+config MACH_SWEDATMS
-+ bool "Sweda TMS Board"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Sweda TMS-100 board.
-+
- endif
-
- # ----------------------------------------------------------
-@@ -130,6 +169,20 @@
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-+config MACH_CAM60
-+ bool "KwikByte CAM60 board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
-+ <http://www.kwikbyte.com>
-+
-+config MACH_SAM9_L9260
-+ bool "Olimex SAM9-L9260 board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-+ http://www.olimex.com/dev/sam9-L9260.html
-+
- endif
-
- # ----------------------------------------------------------
-@@ -178,6 +231,21 @@
-
- # ----------------------------------------------------------
-
-+if ARCH_AT91CAP9
-+
-+comment "AT91CAP9 Board Type"
-+
-+config MACH_AT91CAP9ADK
-+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
-+ depends on ARCH_AT91CAP9
-+ help
-+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
-+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-+
-+endif
-+
-+# ----------------------------------------------------------
-+
- if ARCH_AT91X40
-
- comment "AT91X40 Board Type"
-@@ -198,13 +266,13 @@
-
- config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
-- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
-+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
- help
- Enable support for the DataFlash card.
-
- config MTD_NAND_AT91_BUSWIDTH_16
- bool "Enable 16-bit data bus interface to NAND flash"
-- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
-+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
- help
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-@@ -219,6 +287,65 @@
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-+config AT91_SLOW_CLOCK
-+ bool "Suspend-to-RAM disables main oscillator"
-+ depends on SUSPEND
-+ help
-+ Select this if you want Suspend-to-RAM to save the most power
-+ possible (without powering off the CPU) by disabling the PLLs
-+ and main oscillator so that only the 32 KiHz clock is available.
-+
-+ When only that slow-clock is available, some peripherals lose
-+ functionality. Many can't issue wakeup events unless faster
-+ clocks are available. Some lose their operating state and
-+ need to be completely re-initialized.
-+
-+config AT91_TIMER_HZ
-+ int "Kernel HZ (jiffies per second)"
-+ range 32 1024
-+ depends on ARCH_AT91
-+ default "128" if ARCH_AT91RM9200
-+ default "100"
-+ help
-+ On AT91rm9200 chips where you're using a system clock derived
-+ from the 32768 Hz hardware clock, this tick rate should divide
-+ it exactly: use a power-of-two value, such as 128 or 256, to
-+ reduce timing errors caused by rounding.
-+
-+ On AT91sam926x chips, or otherwise using a higher precision
-+ system clock (of at least several MHz), rounding is less of a
-+ problem so it can be safer to use a decimal values like 100.
-+
-+choice
-+ prompt "Select a UART for early kernel messages"
-+
-+config AT91_EARLY_DBGU
-+ bool "DBGU"
-+
-+config AT91_EARLY_USART0
-+ bool "USART0"
-+
-+config AT91_EARLY_USART1
-+ bool "USART1"
-+
-+config AT91_EARLY_USART2
-+ bool "USART2"
-+ depends on ! ARCH_AT91X40
-+
-+config AT91_EARLY_USART3
-+ bool "USART3"
-+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
-+
-+config AT91_EARLY_USART4
-+ bool "USART4"
-+ depends on ARCH_AT91SAM9260
-+
-+config AT91_EARLY_USART5
-+ bool "USART5"
-+ depends on ARCH_AT91SAM9260
-+
-+endchoice
-+
- endmenu
-
- endif
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile
---- linux-2.6.24/arch/arm/mach-at91/Makefile 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Makefile 2008-03-01 18:45:33.000000000 +0200
-@@ -8,7 +8,6 @@
- obj- :=
-
- obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
--obj-$(CONFIG_PM) += pm.o
-
- # CPU-specific support
- obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-@@ -16,6 +15,7 @@
- obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
-+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
- obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
-
- # AT91RM9200 board-specific support
-@@ -28,11 +28,16 @@
- obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
- obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
- obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-+obj-$(CONFIG_MACH_CHUB) += board-chub.o
- obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
--obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
-+obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
-+obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
-+obj-$(CONFIG_MACH_SWEDATMS) += board-tms.o
-
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-+obj-$(CONFIG_MACH_CAM60) += board-cam60.o
-+obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-@@ -43,19 +48,19 @@
- # AT91SAM9RL board-specific support
- obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-
--# LEDs support
--led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
--led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
--led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
--led-$(CONFIG_MACH_CSB337) += leds.o
--led-$(CONFIG_MACH_CSB637) += leds.o
--led-$(CONFIG_MACH_KB9200) += leds.o
--led-$(CONFIG_MACH_KAFA) += leds.o
--obj-$(CONFIG_LEDS) += $(led-y)
-+# AT91CAP9 board-specific support
-+obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-
--# VGA support
--#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-+# AT91X40 board-specific support
-+obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
-
-+# Drivers
-+obj-y += leds.o
-+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-+
-+# Power Management
-+obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
-
- ifeq ($(CONFIG_PM_DEBUG),y)
- CFLAGS_pm.o += -DDEBUG
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile.boot linux-2.6/arch/arm/mach-at91/Makefile.boot
---- linux-2.6.24/arch/arm/mach-at91/Makefile.boot 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Makefile.boot 2008-01-16 20:26:54.000000000 +0200
-@@ -3,7 +3,12 @@
- # PARAMS_PHYS must be within 4MB of ZRELADDR
- # INITRD_PHYS must be in RAM
-
-+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
-+ zreladdr-y := 0x70008000
-+params_phys-y := 0x70000100
-+initrd_phys-y := 0x70410000
-+else
- zreladdr-y := 0x20008000
- params_phys-y := 0x20000100
- initrd_phys-y := 0x20410000
--
-+endif
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c
---- linux-2.6.24/arch/arm/mach-at91/at91cap9.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-03-01 19:34:19.000000000 +0200
-@@ -0,0 +1,374 @@
-+/*
-+ * arch/arm/mach-at91/at91cap9.c
-+ *
-+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/pm.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/at91cap9.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+#include "generic.h"
-+#include "clock.h"
-+
-+static struct map_desc at91cap9_io_desc[] __initdata = {
-+ {
-+ .virtual = AT91_VA_BASE_SYS,
-+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
-+ .length = SZ_16K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
-+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
-+ .length = AT91CAP9_SRAM_SIZE,
-+ .type = MT_DEVICE,
-+ },
-+};
-+
-+/* --------------------------------------------------------------------
-+ * Clocks
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The peripheral clocks.
-+ */
-+static struct clk pioABCD_clk = {
-+ .name = "pioABCD_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mpb0_clk = {
-+ .name = "mpb0_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mpb1_clk = {
-+ .name = "mpb1_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mpb2_clk = {
-+ .name = "mpb2_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mpb3_clk = {
-+ .name = "mpb3_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mpb4_clk = {
-+ .name = "mpb4_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart0_clk = {
-+ .name = "usart0_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_US0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart1_clk = {
-+ .name = "usart1_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_US1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart2_clk = {
-+ .name = "usart2_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_US2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mmc0_clk = {
-+ .name = "mci0_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mmc1_clk = {
-+ .name = "mci1_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk can_clk = {
-+ .name = "can_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_CAN,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twi_clk = {
-+ .name = "twi_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_TWI,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk spi0_clk = {
-+ .name = "spi0_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk spi1_clk = {
-+ .name = "spi1_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc0_clk = {
-+ .name = "ssc0_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+ .name = "ssc1_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ac97_clk = {
-+ .name = "ac97_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tcb_clk = {
-+ .name = "tcb_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_TCB,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pwmc_clk = {
-+ .name = "pwmc_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk macb_clk = {
-+ .name = "macb_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk aestdes_clk = {
-+ .name = "aestdes_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk adc_clk = {
-+ .name = "adc_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_ADC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk isi_clk = {
-+ .name = "isi_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_ISI,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk lcdc_clk = {
-+ .name = "lcdc_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk dma_clk = {
-+ .name = "dma_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_DMA,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk udphs_clk = {
-+ .name = "udphs_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ohci_clk = {
-+ .name = "ohci_clk",
-+ .pmc_mask = 1 << AT91CAP9_ID_UHP,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+
-+static struct clk *periph_clocks[] __initdata = {
-+ &pioABCD_clk,
-+ &mpb0_clk,
-+ &mpb1_clk,
-+ &mpb2_clk,
-+ &mpb3_clk,
-+ &mpb4_clk,
-+ &usart0_clk,
-+ &usart1_clk,
-+ &usart2_clk,
-+ &mmc0_clk,
-+ &mmc1_clk,
-+ &can_clk,
-+ &twi_clk,
-+ &spi0_clk,
-+ &spi1_clk,
-+ &ssc0_clk,
-+ &ssc1_clk,
-+ &ac97_clk,
-+ &tcb_clk,
-+ &pwmc_clk,
-+ &macb_clk,
-+ &aestdes_clk,
-+ &adc_clk,
-+ &isi_clk,
-+ &lcdc_clk,
-+ &dma_clk,
-+ &udphs_clk,
-+ &ohci_clk,
-+ // irq0 .. irq1
-+};
-+
-+/*
-+ * The four programmable clocks.
-+ * You must configure pin multiplexing to bring these signals out.
-+ */
-+static struct clk pck0 = {
-+ .name = "pck0",
-+ .pmc_mask = AT91_PMC_PCK0,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 0,
-+};
-+static struct clk pck1 = {
-+ .name = "pck1",
-+ .pmc_mask = AT91_PMC_PCK1,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 1,
-+};
-+static struct clk pck2 = {
-+ .name = "pck2",
-+ .pmc_mask = AT91_PMC_PCK2,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 2,
-+};
-+static struct clk pck3 = {
-+ .name = "pck3",
-+ .pmc_mask = AT91_PMC_PCK3,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 3,
-+};
-+
-+static void __init at91cap9_register_clocks(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-+ clk_register(periph_clocks[i]);
-+
-+ clk_register(&pck0);
-+ clk_register(&pck1);
-+ clk_register(&pck2);
-+ clk_register(&pck3);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * GPIO
-+ * -------------------------------------------------------------------- */
-+
-+static struct at91_gpio_bank at91cap9_gpio[] = {
-+ {
-+ .id = AT91CAP9_ID_PIOABCD,
-+ .offset = AT91_PIOA,
-+ .clock = &pioABCD_clk,
-+ }, {
-+ .id = AT91CAP9_ID_PIOABCD,
-+ .offset = AT91_PIOB,
-+ .clock = &pioABCD_clk,
-+ }, {
-+ .id = AT91CAP9_ID_PIOABCD,
-+ .offset = AT91_PIOC,
-+ .clock = &pioABCD_clk,
-+ }, {
-+ .id = AT91CAP9_ID_PIOABCD,
-+ .offset = AT91_PIOD,
-+ .clock = &pioABCD_clk,
-+ }
-+};
-+
-+static void at91cap9_reset(void)
-+{
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-+}
-+
-+static void at91cap9_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * AT91CAP9 processor initialization
-+ * -------------------------------------------------------------------- */
-+
-+void __init at91cap9_initialize(unsigned long main_clock)
-+{
-+ /* Map peripherals */
-+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
-+
-+ at91_arch_reset = at91cap9_reset;
-+ pm_power_off = at91cap9_poweroff;
-+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-+
-+ /* Init clock subsystem */
-+ at91_clock_init(main_clock);
-+
-+ /* Register the processor-specific clocks */
-+ at91cap9_register_clocks();
-+
-+ /* Register GPIO subsystem */
-+ at91_gpio_init(at91cap9_gpio, 4);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Interrupt initialization
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The default interrupt priority levels (0 = lowest, 7 = highest).
-+ */
-+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
-+ 7, /* Advanced Interrupt Controller (FIQ) */
-+ 7, /* System Peripherals */
-+ 1, /* Parallel IO Controller A, B, C and D */
-+ 0, /* MP Block Peripheral 0 */
-+ 0, /* MP Block Peripheral 1 */
-+ 0, /* MP Block Peripheral 2 */
-+ 0, /* MP Block Peripheral 3 */
-+ 0, /* MP Block Peripheral 4 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
-+ 0, /* Multimedia Card Interface 0 */
-+ 0, /* Multimedia Card Interface 1 */
-+ 3, /* CAN */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 5, /* AC97 Controller */
-+ 0, /* Timer Counter 0, 1 and 2 */
-+ 0, /* Pulse Width Modulation Controller */
-+ 3, /* Ethernet */
-+ 0, /* Advanced Encryption Standard, Triple DES*/
-+ 0, /* Analog-to-Digital Converter */
-+ 0, /* Image Sensor Interface */
-+ 3, /* LCD Controller */
-+ 0, /* DMA Controller */
-+ 2, /* USB Device Port */
-+ 2, /* USB Host port */
-+ 0, /* Advanced Interrupt Controller (IRQ0) */
-+ 0, /* Advanced Interrupt Controller (IRQ1) */
-+};
-+
-+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-+{
-+ if (!priority)
-+ priority = at91cap9_default_irq_priority;
-+
-+ /* Initialize the AIC interrupt controller */
-+ at91_aic_init(priority);
-+
-+ /* Enable GPIO interrupts */
-+ at91_gpio_irq_setup();
-+}
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-03-01 20:41:49.000000000 +0200
-@@ -0,0 +1,1119 @@
-+/*
-+ * arch/arm/mach-at91/at91cap9_devices.c
-+ *
-+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include <linux/i2c-gpio.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91cap9.h>
-+#include <asm/arch/at91sam926x_smc.h>
-+#include <asm/arch/at91cap9_matrix.h>
-+
-+#include "generic.h"
-+
-+
-+/* --------------------------------------------------------------------
-+ * USB Host
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+static struct at91_usbh_data usbh_data;
-+
-+static struct resource usbh_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_UHP_BASE,
-+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_UHP,
-+ .end = AT91CAP9_ID_UHP,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91_usbh_device = {
-+ .name = "at91_ohci",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &ohci_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &usbh_data,
-+ },
-+ .resource = usbh_resources,
-+ .num_resources = ARRAY_SIZE(usbh_resources),
-+};
-+
-+void __init at91_add_device_usbh(struct at91_usbh_data *data)
-+{
-+ int i;
-+
-+ if (!data)
-+ return;
-+
-+ /* Enable VBus control for UHP ports */
-+ for (i = 0; i < data->ports; i++) {
-+ if (data->vbus_pin[i])
-+ at91_set_gpio_output(data->vbus_pin[i], 0);
-+ }
-+
-+ usbh_data = *data;
-+ platform_device_register(&at91_usbh_device);
-+}
-+#else
-+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * Ethernet
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-+static u64 eth_dmamask = DMA_BIT_MASK(32);
-+static struct at91_eth_data eth_data;
-+
-+static struct resource eth_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_EMAC,
-+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_EMAC,
-+ .end = AT91CAP9_ID_EMAC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_eth_device = {
-+ .name = "macb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &eth_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &eth_data,
-+ },
-+ .resource = eth_resources,
-+ .num_resources = ARRAY_SIZE(eth_resources),
-+};
-+
-+void __init at91_add_device_eth(struct at91_eth_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ if (data->phy_irq_pin) {
-+ at91_set_gpio_input(data->phy_irq_pin, 0);
-+ at91_set_deglitch(data->phy_irq_pin, 1);
-+ }
-+
-+ /* Pins used for MII and RMII */
-+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
-+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
-+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
-+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
-+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
-+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
-+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
-+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
-+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
-+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
-+
-+ if (!data->is_rmii) {
-+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
-+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
-+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
-+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
-+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
-+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
-+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
-+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
-+ }
-+
-+ eth_data = *data;
-+ platform_device_register(&at91cap9_eth_device);
-+}
-+#else
-+void __init at91_add_device_eth(struct at91_eth_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * MMC / SD
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-+static u64 mmc_dmamask = DMA_BIT_MASK(32);
-+static struct at91_mmc_data mmc0_data, mmc1_data;
-+
-+static struct resource mmc0_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_MCI0,
-+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_MCI0,
-+ .end = AT91CAP9_ID_MCI0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_mmc0_device = {
-+ .name = "at91_mci",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &mmc_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &mmc0_data,
-+ },
-+ .resource = mmc0_resources,
-+ .num_resources = ARRAY_SIZE(mmc0_resources),
-+};
-+
-+static struct resource mmc1_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_MCI1,
-+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_MCI1,
-+ .end = AT91CAP9_ID_MCI1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_mmc1_device = {
-+ .name = "at91_mci",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &mmc_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &mmc1_data,
-+ },
-+ .resource = mmc1_resources,
-+ .num_resources = ARRAY_SIZE(mmc1_resources),
-+};
-+
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ /* input/irq */
-+ if (data->det_pin) {
-+ at91_set_gpio_input(data->det_pin, 1);
-+ at91_set_deglitch(data->det_pin, 1);
-+ }
-+ if (data->wp_pin)
-+ at91_set_gpio_input(data->wp_pin, 1);
-+ if (data->vcc_pin)
-+ at91_set_gpio_output(data->vcc_pin, 0);
-+
-+ if (mmc_id == 0) { /* MCI0 */
-+ /* CLK */
-+ at91_set_A_periph(AT91_PIN_PA2, 0);
-+
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA1, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA0, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA3, 1);
-+ at91_set_A_periph(AT91_PIN_PA4, 1);
-+ at91_set_A_periph(AT91_PIN_PA5, 1);
-+ }
-+
-+ mmc0_data = *data;
-+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
-+ platform_device_register(&at91cap9_mmc0_device);
-+ } else { /* MCI1 */
-+ /* CLK */
-+ at91_set_A_periph(AT91_PIN_PA16, 0);
-+
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA17, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA18, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA19, 1);
-+ at91_set_A_periph(AT91_PIN_PA20, 1);
-+ at91_set_A_periph(AT91_PIN_PA21, 1);
-+ }
-+
-+ mmc1_data = *data;
-+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
-+ platform_device_register(&at91cap9_mmc1_device);
-+ }
-+}
-+#else
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * NAND / SmartMedia
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-+static struct at91_nand_data nand_data;
-+
-+#define NAND_BASE AT91_CHIPSELECT_3
-+
-+static struct resource nand_resources[] = {
-+ [0] = {
-+ .start = NAND_BASE,
-+ .end = NAND_BASE + SZ_256M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC,
-+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91cap9_nand_device = {
-+ .name = "at91_nand",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nand_data,
-+ },
-+ .resource = nand_resources,
-+ .num_resources = ARRAY_SIZE(nand_resources),
-+};
-+
-+void __init at91_add_device_nand(struct at91_nand_data *data)
-+{
-+ unsigned long csa, mode;
-+
-+ if (!data)
-+ return;
-+
-+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-+
-+ /* set the bus interface characteristics */
-+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
-+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
-+
-+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
-+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
-+
-+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-+
-+ if (data->bus_width_16)
-+ mode = AT91_SMC_DBW_16;
-+ else
-+ mode = AT91_SMC_DBW_8;
-+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-+
-+ /* enable pin */
-+ if (data->enable_pin)
-+ at91_set_gpio_output(data->enable_pin, 1);
-+
-+ /* ready/busy pin */
-+ if (data->rdy_pin)
-+ at91_set_gpio_input(data->rdy_pin, 1);
-+
-+ /* card detect pin */
-+ if (data->det_pin)
-+ at91_set_gpio_input(data->det_pin, 1);
-+
-+ nand_data = *data;
-+ platform_device_register(&at91cap9_nand_device);
-+}
-+#else
-+void __init at91_add_device_nand(struct at91_nand_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * TWI (i2c)
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * Prefer the GPIO code since the TWI controller isn't robust
-+ * (gets overruns and underruns under load) and can only issue
-+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
-+ */
-+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-+
-+static struct i2c_gpio_platform_data pdata = {
-+ .sda_pin = AT91_PIN_PB4,
-+ .sda_is_open_drain = 1,
-+ .scl_pin = AT91_PIN_PB5,
-+ .scl_is_open_drain = 1,
-+ .udelay = 2, /* ~100 kHz */
-+};
-+
-+static struct platform_device at91cap9_twi_device = {
-+ .name = "i2c-gpio",
-+ .id = -1,
-+ .dev.platform_data = &pdata,
-+};
-+
-+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-+{
-+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
-+ at91_set_multi_drive(AT91_PIN_PB4, 1);
-+
-+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
-+ at91_set_multi_drive(AT91_PIN_PB5, 1);
-+
-+ i2c_register_board_info(0, devices, nr_devices);
-+ platform_device_register(&at91cap9_twi_device);
-+}
-+
-+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-+
-+static struct resource twi_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_TWI,
-+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_TWI,
-+ .end = AT91CAP9_ID_TWI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_twi_device = {
-+ .name = "at91_i2c",
-+ .id = -1,
-+ .resource = twi_resources,
-+ .num_resources = ARRAY_SIZE(twi_resources),
-+};
-+
-+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-+{
-+ /* pins used for TWI interface */
-+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PB4, 1);
-+
-+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PB5, 1);
-+
-+ i2c_register_board_info(0, devices, nr_devices);
-+ platform_device_register(&at91cap9_twi_device);
-+}
-+#else
-+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-+#endif
-+
-+/* --------------------------------------------------------------------
-+ * SPI
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-+static u64 spi_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource spi0_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_SPI0,
-+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_SPI0,
-+ .end = AT91CAP9_ID_SPI0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_spi0_device = {
-+ .name = "atmel_spi",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &spi_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = spi0_resources,
-+ .num_resources = ARRAY_SIZE(spi0_resources),
-+};
-+
-+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
-+
-+static struct resource spi1_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_SPI1,
-+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_SPI1,
-+ .end = AT91CAP9_ID_SPI1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_spi1_device = {
-+ .name = "atmel_spi",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &spi_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = spi1_resources,
-+ .num_resources = ARRAY_SIZE(spi1_resources),
-+};
-+
-+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-+
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-+{
-+ int i;
-+ unsigned long cs_pin;
-+ short enable_spi0 = 0;
-+ short enable_spi1 = 0;
-+
-+ /* Choose SPI chip-selects */
-+ for (i = 0; i < nr_devices; i++) {
-+ if (devices[i].controller_data)
-+ cs_pin = (unsigned long) devices[i].controller_data;
-+ else if (devices[i].bus_num == 0)
-+ cs_pin = spi0_standard_cs[devices[i].chip_select];
-+ else
-+ cs_pin = spi1_standard_cs[devices[i].chip_select];
-+
-+ if (devices[i].bus_num == 0)
-+ enable_spi0 = 1;
-+ else
-+ enable_spi1 = 1;
-+
-+ /* enable chip-select pin */
-+ at91_set_gpio_output(cs_pin, 1);
-+
-+ /* pass chip-select pin to driver */
-+ devices[i].controller_data = (void *) cs_pin;
-+ }
-+
-+ spi_register_board_info(devices, nr_devices);
-+
-+ /* Configure SPI bus(es) */
-+ if (enable_spi0) {
-+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
-+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
-+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-+
-+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
-+ platform_device_register(&at91cap9_spi0_device);
-+ }
-+ if (enable_spi1) {
-+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
-+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
-+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-+
-+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
-+ platform_device_register(&at91cap9_spi1_device);
-+ }
-+}
-+#else
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_TCB0,
-+ .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_TCB,
-+ .end = AT91CAP9_ID_TCB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has one clock and irq for all three TC channels */
-+ at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
-+ platform_device_register(&at91cap9_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+/* --------------------------------------------------------------------
-+ * RTT
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource rtt_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT,
-+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91cap9_rtt_device = {
-+ .name = "at91_rtt",
-+ .id = -1,
-+ .resource = rtt_resources,
-+ .num_resources = ARRAY_SIZE(rtt_resources),
-+};
-+
-+static void __init at91_add_device_rtt(void)
-+{
-+ device_init_wakeup(&at91cap9_rtt_device.dev, 1);
-+ platform_device_register(&at91cap9_rtt_device);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * Watchdog
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
-+static struct platform_device at91cap9_wdt_device = {
-+ .name = "at91_wdt",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static void __init at91_add_device_watchdog(void)
-+{
-+ platform_device_register(&at91cap9_wdt_device);
-+}
-+#else
-+static void __init at91_add_device_watchdog(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * AC97
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
-+static u64 ac97_dmamask = DMA_BIT_MASK(32);
-+static struct atmel_ac97_data ac97_data;
-+
-+static struct resource ac97_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_AC97C,
-+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_AC97C,
-+ .end = AT91CAP9_ID_AC97C,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_ac97_device = {
-+ .name = "ac97c",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ac97_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &ac97_data,
-+ },
-+ .resource = ac97_resources,
-+ .num_resources = ARRAY_SIZE(ac97_resources),
-+};
-+
-+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
-+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
-+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
-+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
-+
-+ /* reset */
-+ if (data->reset_pin)
-+ at91_set_gpio_output(data->reset_pin, 0);
-+
-+ ac97_data = *data;
-+ platform_device_register(&at91cap9_ac97_device);
-+}
-+#else
-+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * LCD Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-+static struct atmel_lcdfb_info lcdc_data;
-+
-+static struct resource lcdc_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_LCDC_BASE,
-+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_LCDC,
-+ .end = AT91CAP9_ID_LCDC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91_lcdc_device = {
-+ .name = "atmel_lcdfb",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &lcdc_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &lcdc_data,
-+ },
-+ .resource = lcdc_resources,
-+ .num_resources = ARRAY_SIZE(lcdc_resources),
-+};
-+
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-+{
-+ if (!data)
-+ return;
-+
-+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
-+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
-+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
-+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
-+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
-+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
-+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
-+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
-+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
-+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
-+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
-+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
-+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
-+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
-+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
-+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
-+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
-+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
-+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
-+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
-+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
-+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-+
-+ lcdc_data = *data;
-+ platform_device_register(&at91_lcdc_device);
-+}
-+#else
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SSC -- Synchronous Serial Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc0_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_SSC0,
-+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_SSC0,
-+ .end = AT91CAP9_ID_SSC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_ssc0_device = {
-+ .name = "ssc",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &ssc0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc0_resources,
-+ .num_resources = ARRAY_SIZE(ssc0_resources),
-+};
-+
-+static inline void configure_ssc0_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB0, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB1, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB2, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB3, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB4, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB5, 1);
-+}
-+
-+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc1_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_SSC1,
-+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_SSC1,
-+ .end = AT91CAP9_ID_SSC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91cap9_ssc1_device = {
-+ .name = "ssc",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ssc1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc1_resources,
-+ .num_resources = ARRAY_SIZE(ssc1_resources),
-+};
-+
-+static inline void configure_ssc1_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB6, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB7, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB8, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB9, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB10, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB11, 1);
-+}
-+
-+/*
-+ * SSC controllers are accessed through library code, instead of any
-+ * kind of all-singing/all-dancing driver. For example one could be
-+ * used by a particular I2S audio codec's driver, while another one
-+ * on the same system might be used by a custom data capture driver.
-+ */
-+void __init at91_add_device_ssc(unsigned id, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ /*
-+ * NOTE: caller is responsible for passing information matching
-+ * "pins" to whatever will be using each particular controller.
-+ */
-+ switch (id) {
-+ case AT91CAP9_ID_SSC0:
-+ pdev = &at91cap9_ssc0_device;
-+ configure_ssc0_pins(pins);
-+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
-+ break;
-+ case AT91CAP9_ID_SSC1:
-+ pdev = &at91cap9_ssc1_device;
-+ configure_ssc1_pins(pins);
-+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ platform_device_register(pdev);
-+}
-+
-+#else
-+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * UART
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SERIAL_ATMEL)
-+static struct resource dbgu_resources[] = {
-+ [0] = {
-+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
-+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_ID_SYS,
-+ .end = AT91_ID_SYS,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data dbgu_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-+};
-+
-+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-+
-+static struct platform_device at91cap9_dbgu_device = {
-+ .name = "atmel_usart",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &dbgu_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dbgu_data,
-+ },
-+ .resource = dbgu_resources,
-+ .num_resources = ARRAY_SIZE(dbgu_resources),
-+};
-+
-+static inline void configure_dbgu_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
-+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-+}
-+
-+static struct resource uart0_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_US0,
-+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_US0,
-+ .end = AT91CAP9_ID_US0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart0_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static u64 uart0_dmamask = DMA_BIT_MASK(32);
-+
-+static struct platform_device at91cap9_uart0_device = {
-+ .name = "atmel_usart",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &uart0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart0_data,
-+ },
-+ .resource = uart0_resources,
-+ .num_resources = ARRAY_SIZE(uart0_resources),
-+};
-+
-+static inline void configure_usart0_pins(unsigned pins)
-+{
-+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
-+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
-+}
-+
-+static struct resource uart1_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_US1,
-+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_US1,
-+ .end = AT91CAP9_ID_US1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart1_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static u64 uart1_dmamask = DMA_BIT_MASK(32);
-+
-+static struct platform_device at91cap9_uart1_device = {
-+ .name = "atmel_usart",
-+ .id = 2,
-+ .dev = {
-+ .dma_mask = &uart1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart1_data,
-+ },
-+ .resource = uart1_resources,
-+ .num_resources = ARRAY_SIZE(uart1_resources),
-+};
-+
-+static inline void configure_usart1_pins(unsigned pins)
-+{
-+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
-+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-+}
-+
-+static struct resource uart2_resources[] = {
-+ [0] = {
-+ .start = AT91CAP9_BASE_US2,
-+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91CAP9_ID_US2,
-+ .end = AT91CAP9_ID_US2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart2_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static u64 uart2_dmamask = DMA_BIT_MASK(32);
-+
-+static struct platform_device at91cap9_uart2_device = {
-+ .name = "atmel_usart",
-+ .id = 3,
-+ .dev = {
-+ .dma_mask = &uart2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart2_data,
-+ },
-+ .resource = uart2_resources,
-+ .num_resources = ARRAY_SIZE(uart2_resources),
-+};
-+
-+static inline void configure_usart2_pins(unsigned pins)
-+{
-+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
-+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-+}
-+
-+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+struct platform_device *atmel_default_console_device; /* the serial console device */
-+
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0: /* DBGU */
-+ pdev = &at91cap9_dbgu_device;
-+ configure_dbgu_pins();
-+ at91_clock_associate("mck", &pdev->dev, "usart");
-+ break;
-+ case AT91CAP9_ID_US0:
-+ pdev = &at91cap9_uart0_device;
-+ configure_usart0_pins(pins);
-+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91CAP9_ID_US1:
-+ pdev = &at91cap9_uart1_device;
-+ configure_usart1_pins(pins);
-+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91CAP9_ID_US2:
-+ pdev = &at91cap9_uart2_device;
-+ configure_usart2_pins(pins);
-+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-+ break;
-+ default:
-+ return;
-+ }
-+ pdev->id = portnr; /* update to mapped ID */
-+
-+ if (portnr < ATMEL_MAX_UART)
-+ at91_uarts[portnr] = pdev;
-+}
-+
-+void __init at91_set_serial_console(unsigned portnr)
-+{
-+ if (portnr < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[portnr];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
-+void __init at91_add_device_serial(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ATMEL_MAX_UART; i++) {
-+ if (at91_uarts[i])
-+ platform_device_register(at91_uarts[i]);
-+ }
-+}
-+#else
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-+void __init at91_set_serial_console(unsigned portnr) {}
-+void __init at91_add_device_serial(void) {}
-+#endif
-+
-+
-+/* -------------------------------------------------------------------- */
-+/*
-+ * These devices are always present and don't need any board-specific
-+ * setup.
-+ */
-+static int __init at91_add_standard_devices(void)
-+{
-+ at91_add_device_rtt();
-+ at91_add_device_watchdog();
-+ at91_add_device_tc();
-+ return 0;
-+}
-+
-+arch_initcall(at91_add_standard_devices);
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200.c linux-2.6/arch/arm/mach-at91/at91rm9200.c
---- linux-2.6.24/arch/arm/mach-at91/at91rm9200.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200.c 2008-03-01 18:46:49.000000000 +0200
-@@ -301,28 +301,28 @@
- static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-- 0, /* Parallel IO Controller D */
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-- 6, /* USART 3 */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller D */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
-+ 5, /* USART 3 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 5, /* Serial Synchronous Controller 2 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* Ethernet MAC */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 18:50:43.000000000 +0200
-@@ -13,6 +13,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/i2c-gpio.h>
-
-@@ -29,7 +30,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
--static u64 ohci_dmamask = 0xffffffffUL;
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
- static struct at91_usbh_data usbh_data;
-
- static struct resource usbh_resources[] = {
-@@ -50,7 +51,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
-@@ -125,7 +126,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
--static u64 eth_dmamask = 0xffffffffUL;
-+static u64 eth_dmamask = DMA_BIT_MASK(32);
- static struct at91_eth_data eth_data;
-
- static struct resource eth_resources[] = {
-@@ -146,7 +147,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &eth_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &eth_data,
- },
- .resource = eth_resources,
-@@ -285,7 +286,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
--static u64 mmc_dmamask = 0xffffffffUL;
-+static u64 mmc_dmamask = DMA_BIT_MASK(32);
- static struct at91_mmc_data mmc_data;
-
- static struct resource mmc_resources[] = {
-@@ -306,7 +307,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
-@@ -375,7 +376,7 @@
- static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
-- .end = NAND_BASE + SZ_8M - 1,
-+ .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
- };
-@@ -512,8 +513,19 @@
- * SPI
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
--static u64 spi_dmamask = 0xffffffffUL;
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
-+#define SPI_DEVNAME "atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
-+static u64 spi_dmamask = DMA_BIT_MASK(32);
-
- static struct resource spi_resources[] = {
- [0] = {
-@@ -529,11 +541,11 @@
- };
-
- static struct platform_device at91rm9200_spi_device = {
-- .name = "atmel_spi",
-+ .name = SPI_DEVNAME,
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi_resources,
- .num_resources = ARRAY_SIZE(spi_resources),
-@@ -557,8 +569,17 @@
- else
- cs_pin = spi_standard_cs[devices[i].chip_select];
-
-- /* enable chip-select pin */
-- at91_set_gpio_output(cs_pin, 1);
-+ if (devices[i].chip_select == 0) /* for CS0 errata */
-+ at91_set_A_periph(cs_pin, 0);
-+ else
-+ at91_set_gpio_output(cs_pin, 1);
-+
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+ /*
-+ * Force peripheral mode when using the legacy SPI driver.
-+ */
-+ at91_set_A_periph(cs_pin, 0);
-+#endif
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
-@@ -573,6 +594,90 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter blocks
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb0_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_TCB0,
-+ .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_TC0,
-+ .end = AT91RM9200_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91RM9200_ID_TC1,
-+ .end = AT91RM9200_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91RM9200_ID_TC2,
-+ .end = AT91RM9200_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_tcb0_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb0_resources,
-+ .num_resources = ARRAY_SIZE(tcb0_resources),
-+};
-+
-+static struct resource tcb1_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_TCB1,
-+ .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_TC3,
-+ .end = AT91RM9200_ID_TC3,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91RM9200_ID_TC4,
-+ .end = AT91RM9200_ID_TC4,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91RM9200_ID_TC5,
-+ .end = AT91RM9200_ID_TC5,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_tcb1_device = {
-+ .name = "atmel_tcb",
-+ .id = 1,
-+ .resource = tcb1_resources,
-+ .num_resources = ARRAY_SIZE(tcb1_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
-+ platform_device_register(&at91rm9200_tcb0_device);
-+
-+ at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
-+ at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
-+ at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
-+ platform_device_register(&at91rm9200_tcb1_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-@@ -585,6 +690,7 @@
-
- static void __init at91_add_device_rtc(void)
- {
-+ device_init_wakeup(&at91rm9200_rtc_device.dev, 1);
- platform_device_register(&at91rm9200_rtc_device);
- }
- #else
-@@ -613,24 +719,175 @@
-
-
- /* --------------------------------------------------------------------
-- * LEDs
-+ * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_LEDS)
--u8 at91_leds_cpu;
--u8 at91_leds_timer;
-+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc0_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_SSC0,
-+ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_SSC0,
-+ .end = AT91RM9200_ID_SSC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_ssc0_device = {
-+ .name = "ssc",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &ssc0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc0_resources,
-+ .num_resources = ARRAY_SIZE(ssc0_resources),
-+};
-+
-+static inline void configure_ssc0_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB0, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB1, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB2, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB3, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB4, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB5, 1);
-+}
-+
-+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc1_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_SSC1,
-+ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_SSC1,
-+ .end = AT91RM9200_ID_SSC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_ssc1_device = {
-+ .name = "ssc",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ssc1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc1_resources,
-+ .num_resources = ARRAY_SIZE(ssc1_resources),
-+};
-
--void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+static inline void configure_ssc1_pins(unsigned pins)
- {
-- /* Enable GPIO to access the LEDs */
-- at91_set_gpio_output(cpu_led, 1);
-- at91_set_gpio_output(timer_led, 1);
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB6, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB7, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB8, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB9, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB10, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB11, 1);
-+}
-+
-+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
-
-- at91_leds_cpu = cpu_led;
-- at91_leds_timer = timer_led;
-+static struct resource ssc2_resources[] = {
-+ [0] = {
-+ .start = AT91RM9200_BASE_SSC2,
-+ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91RM9200_ID_SSC2,
-+ .end = AT91RM9200_ID_SSC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91rm9200_ssc2_device = {
-+ .name = "ssc",
-+ .id = 2,
-+ .dev = {
-+ .dma_mask = &ssc2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc2_resources,
-+ .num_resources = ARRAY_SIZE(ssc2_resources),
-+};
-+
-+static inline void configure_ssc2_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB12, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB13, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB14, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB15, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB16, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB17, 1);
- }
-+
-+/*
-+ * SSC controllers are accessed through library code, instead of any
-+ * kind of all-singing/all-dancing driver. For example one could be
-+ * used by a particular I2S audio codec's driver, while another one
-+ * on the same system might be used by a custom data capture driver.
-+ */
-+void __init at91_add_device_ssc(unsigned id, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ /*
-+ * NOTE: caller is responsible for passing information matching
-+ * "pins" to whatever will be using each particular controller.
-+ */
-+ switch (id) {
-+ case AT91RM9200_ID_SSC0:
-+ pdev = &at91rm9200_ssc0_device;
-+ configure_ssc0_pins(pins);
-+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
-+ break;
-+ case AT91RM9200_ID_SSC1:
-+ pdev = &at91rm9200_ssc1_device;
-+ configure_ssc1_pins(pins);
-+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
-+ break;
-+ case AT91RM9200_ID_SSC2:
-+ pdev = &at91rm9200_ssc2_device;
-+ configure_ssc2_pins(pins);
-+ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ platform_device_register(pdev);
-+}
-+
- #else
--void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
- #endif
-
-
-@@ -657,13 +914,15 @@
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
- };
-+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91rm9200_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
-- .platform_data = &dbgu_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &dbgu_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-@@ -692,29 +951,36 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91rm9200_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
-- .platform_data = &uart0_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
- };
-
--static inline void configure_usart0_pins(void)
-+static inline void configure_usart0_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
-- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
-
-- /*
-- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
-- * We need to drive the pin manually. Default is off (RTS is active low).
-- */
-- at91_set_gpio_output(AT91_PIN_PA21, 1);
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
-+
-+ if (pins & ATMEL_UART_RTS) {
-+ /*
-+ * AT91RM9200 Errata #39 - RTS0 is not internally connected
-+ * to PA21, so we need to drive the pin manually.
-+ * Default is off (RTS is active low).
-+ */
-+ at91_set_gpio_output(AT91_PIN_PA21, 1);
-+ }
- }
-
- static struct resource uart1_resources[] = {
-@@ -734,28 +1000,37 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91rm9200_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
-- .platform_data = &uart1_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
- };
-
--static inline void configure_usart1_pins(void)
-+static inline void configure_usart1_pins(unsigned pins)
- {
-- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
-- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
- at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
-- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
-- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
-- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
-- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
-+
-+ if (pins & ATMEL_UART_RI)
-+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
-+ if (pins & ATMEL_UART_DTR)
-+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
-+ if (pins & ATMEL_UART_DCD)
-+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
-+ if (pins & ATMEL_UART_DSR)
-+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
- }
-
- static struct resource uart2_resources[] = {
-@@ -775,22 +1050,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91rm9200_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
-- .platform_data = &uart2_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
- };
-
--static inline void configure_usart2_pins(void)
-+static inline void configure_usart2_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
-+
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
- }
-
- static struct resource uart3_resources[] = {
-@@ -810,28 +1092,35 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91rm9200_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
-- .platform_data = &uart3_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart3_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
- };
-
--static inline void configure_usart3_pins(void)
-+static inline void configure_usart3_pins(unsigned pins)
- {
- at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
- at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
-+
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
- }
-
--struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
--void __init at91_init_serial(struct at91_uart_config *config)
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
- {
- int i;
-
-@@ -839,22 +1128,22 @@
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
-- configure_usart0_pins();
-+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91rm9200_uart0_device;
- at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
- break;
- case 1:
-- configure_usart1_pins();
-+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
- at91_uarts[i] = &at91rm9200_uart1_device;
- at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
- break;
- case 2:
-- configure_usart2_pins();
-+ configure_usart2_pins(0);
- at91_uarts[i] = &at91rm9200_uart2_device;
- at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
- break;
- case 3:
-- configure_usart3_pins();
-+ configure_usart3_pins(0);
- at91_uarts[i] = &at91rm9200_uart3_device;
- at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
- break;
-@@ -876,6 +1165,53 @@
- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0: /* DBGU */
-+ pdev = &at91rm9200_dbgu_device;
-+ configure_dbgu_pins();
-+ at91_clock_associate("mck", &pdev->dev, "usart");
-+ break;
-+ case AT91RM9200_ID_US0:
-+ pdev = &at91rm9200_uart0_device;
-+ configure_usart0_pins(pins);
-+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91RM9200_ID_US1:
-+ pdev = &at91rm9200_uart1_device;
-+ configure_usart1_pins(pins);
-+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91RM9200_ID_US2:
-+ pdev = &at91rm9200_uart2_device;
-+ configure_usart2_pins(pins);
-+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91RM9200_ID_US3:
-+ pdev = &at91rm9200_uart3_device;
-+ configure_usart3_pins(pins);
-+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
-+ break;
-+ default:
-+ return;
-+ }
-+ pdev->id = portnr; /* update to mapped ID */
-+
-+ if (portnr < ATMEL_MAX_UART)
-+ at91_uarts[portnr] = pdev;
-+}
-+
-+void __init at91_set_serial_console(unsigned portnr)
-+{
-+ if (portnr < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[portnr];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
- void __init at91_add_device_serial(void)
- {
- int i;
-@@ -886,7 +1222,9 @@
- }
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-+void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
- #endif
-
-@@ -901,6 +1239,7 @@
- {
- at91_add_device_rtc();
- at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c
---- linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2007-12-31 15:04:28.000000000 +0200
-@@ -136,8 +136,6 @@
- u32 alm;
- int status = 0;
-
-- BUG_ON(delta < 2);
--
- /* Use "raw" primitives so we behave correctly on RT kernels. */
- raw_local_irq_save(flags);
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9260.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-03-01 19:03:06.000000000 +0200
-@@ -11,6 +11,7 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -18,6 +19,7 @@
- #include <asm/arch/at91sam9260.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -267,6 +269,11 @@
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9260_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9260 processor initialization
-@@ -304,6 +311,7 @@
- iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
-
- at91_arch_reset = at91sam9260_reset;
-+ pm_power_off = at91sam9260_poweroff;
- at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- | (1 << AT91SAM9260_ID_IRQ2);
-
-@@ -327,30 +335,30 @@
- static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
- 0, /* Analog-to-Digital Converter */
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller */
- 0,
- 0,
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
-- 6, /* USART 3 */
-- 6, /* USART 4 */
-- 6, /* USART 5 */
-+ 5, /* USART 3 */
-+ 5, /* USART 4 */
-+ 5, /* USART 5 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:09:03.000000000 +0200
-@@ -12,13 +12,14 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/i2c-gpio.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9260.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam926x_smc.h>
- #include <asm/arch/at91sam9260_matrix.h>
-
- #include "generic.h"
-@@ -29,7 +30,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
--static u64 ohci_dmamask = 0xffffffffUL;
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
- static struct at91_usbh_data usbh_data;
-
- static struct resource usbh_resources[] = {
-@@ -50,7 +51,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
-@@ -125,7 +126,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
--static u64 eth_dmamask = 0xffffffffUL;
-+static u64 eth_dmamask = DMA_BIT_MASK(32);
- static struct at91_eth_data eth_data;
-
- static struct resource eth_resources[] = {
-@@ -146,7 +147,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &eth_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &eth_data,
- },
- .resource = eth_resources,
-@@ -199,7 +200,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
--static u64 mmc_dmamask = 0xffffffffUL;
-+static u64 mmc_dmamask = DMA_BIT_MASK(32);
- static struct at91_mmc_data mmc_data;
-
- static struct resource mmc_resources[] = {
-@@ -220,7 +221,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
-@@ -287,9 +288,14 @@
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
-- .end = NAND_BASE + SZ_8M - 1,
-+ .end = NAND_BASE + SZ_256M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC,
-+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
- };
-@@ -312,7 +318,7 @@
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
-- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
-+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-@@ -431,7 +437,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
--static u64 spi_dmamask = 0xffffffffUL;
-+static u64 spi_dmamask = DMA_BIT_MASK(32);
-
- static struct resource spi0_resources[] = {
- [0] = {
-@@ -451,7 +457,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-@@ -477,7 +483,7 @@
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-@@ -539,24 +545,211 @@
-
-
- /* --------------------------------------------------------------------
-- * LEDs
-+ * Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_LEDS)
--u8 at91_leds_cpu;
--u8 at91_leds_timer;
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9260_BASE_TCB0,
-+ .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9260_ID_TC0,
-+ .end = AT91SAM9260_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9260_ID_TC1,
-+ .end = AT91SAM9260_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9260_ID_TC2,
-+ .end = AT91SAM9260_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9260_tcb0_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb0_resources,
-+ .num_resources = ARRAY_SIZE(tcb0_resources),
-+};
-+
-+static struct resource tcb1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9260_BASE_TCB1,
-+ .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9260_ID_TC3,
-+ .end = AT91SAM9260_ID_TC3,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9260_ID_TC4,
-+ .end = AT91SAM9260_ID_TC4,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9260_ID_TC5,
-+ .end = AT91SAM9260_ID_TC5,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9260_tcb1_device = {
-+ .name = "atmel_tcb",
-+ .id = 1,
-+ .resource = tcb1_resources,
-+ .num_resources = ARRAY_SIZE(tcb1_resources),
-+};
-
--void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+static void __init at91_add_device_tc(void)
- {
-- /* Enable GPIO to access the LEDs */
-- at91_set_gpio_output(cpu_led, 1);
-- at91_set_gpio_output(timer_led, 1);
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9260_tcb0_device);
-+
-+ at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
-+ at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
-+ at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9260_tcb1_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-
-- at91_leds_cpu = cpu_led;
-- at91_leds_timer = timer_led;
-+
-+/* --------------------------------------------------------------------
-+ * RTT
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource rtt_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT,
-+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91sam9260_rtt_device = {
-+ .name = "at91_rtt",
-+ .id = -1,
-+ .resource = rtt_resources,
-+ .num_resources = ARRAY_SIZE(rtt_resources),
-+};
-+
-+static void __init at91_add_device_rtt(void)
-+{
-+ device_init_wakeup(&at91sam9260_rtt_device.dev, 1);
-+ platform_device_register(&at91sam9260_rtt_device);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * Watchdog
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
-+static struct platform_device at91sam9260_wdt_device = {
-+ .name = "at91_wdt",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static void __init at91_add_device_watchdog(void)
-+{
-+ platform_device_register(&at91sam9260_wdt_device);
- }
- #else
--void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+static void __init at91_add_device_watchdog(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SSC -- Synchronous Serial Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-+static u64 ssc_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9260_BASE_SSC,
-+ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9260_ID_SSC,
-+ .end = AT91SAM9260_ID_SSC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9260_ssc_device = {
-+ .name = "ssc",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &ssc_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc_resources,
-+ .num_resources = ARRAY_SIZE(ssc_resources),
-+};
-+
-+static inline void configure_ssc_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB17, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB16, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB18, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB19, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB20, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB21, 1);
-+}
-+
-+/*
-+ * SSC controllers are accessed through library code, instead of any
-+ * kind of all-singing/all-dancing driver. For example one could be
-+ * used by a particular I2S audio codec's driver, while another one
-+ * on the same system might be used by a custom data capture driver.
-+ */
-+void __init at91_add_device_ssc(unsigned id, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ /*
-+ * NOTE: caller is responsible for passing information matching
-+ * "pins" to whatever will be using each particular controller.
-+ */
-+ switch (id) {
-+ case AT91SAM9260_ID_SSC:
-+ pdev = &at91sam9260_ssc_device;
-+ configure_ssc_pins(pins);
-+ at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ platform_device_register(pdev);
-+}
-+
-+#else
-+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
- #endif
-
-
-@@ -582,13 +775,15 @@
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
- };
-+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
-- .platform_data = &dbgu_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &dbgu_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-@@ -617,28 +812,37 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
-- .platform_data = &uart0_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
- };
-
--static inline void configure_usart0_pins(void)
-+static inline void configure_usart0_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
-- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
-- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
-- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
-- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
-- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
-- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
-+ if (pins & ATMEL_UART_DTR)
-+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
-+ if (pins & ATMEL_UART_DSR)
-+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
-+ if (pins & ATMEL_UART_DCD)
-+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
-+ if (pins & ATMEL_UART_RI)
-+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
- }
-
- static struct resource uart1_resources[] = {
-@@ -658,24 +862,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
-- .platform_data = &uart1_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
- };
-
--static inline void configure_usart1_pins(void)
-+static inline void configure_usart1_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
-- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
-- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
- }
-
- static struct resource uart2_resources[] = {
-@@ -695,22 +904,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
-- .platform_data = &uart2_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
- };
-
--static inline void configure_usart2_pins(void)
-+static inline void configure_usart2_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
- }
-
- static struct resource uart3_resources[] = {
-@@ -730,22 +946,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
-- .platform_data = &uart3_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart3_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
- };
-
--static inline void configure_usart3_pins(void)
-+static inline void configure_usart3_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
- }
-
- static struct resource uart4_resources[] = {
-@@ -765,13 +988,15 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart4_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_uart4_device = {
- .name = "atmel_usart",
- .id = 5,
- .dev = {
-- .platform_data = &uart4_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart4_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart4_data,
- },
- .resource = uart4_resources,
- .num_resources = ARRAY_SIZE(uart4_resources),
-@@ -800,13 +1025,15 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart5_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9260_uart5_device = {
- .name = "atmel_usart",
- .id = 6,
- .dev = {
-- .platform_data = &uart5_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart5_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart5_data,
- },
- .resource = uart5_resources,
- .num_resources = ARRAY_SIZE(uart5_resources),
-@@ -818,10 +1045,10 @@
- at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
- }
-
--struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
--void __init at91_init_serial(struct at91_uart_config *config)
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
- {
- int i;
-
-@@ -829,22 +1056,22 @@
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
-- configure_usart0_pins();
-+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
- at91_uarts[i] = &at91sam9260_uart0_device;
- at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
- break;
- case 1:
-- configure_usart1_pins();
-+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91sam9260_uart1_device;
- at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
- break;
- case 2:
-- configure_usart2_pins();
-+ configure_usart2_pins(0);
- at91_uarts[i] = &at91sam9260_uart2_device;
- at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
- break;
- case 3:
-- configure_usart3_pins();
-+ configure_usart3_pins(0);
- at91_uarts[i] = &at91sam9260_uart3_device;
- at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
- break;
-@@ -876,6 +1103,63 @@
- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0: /* DBGU */
-+ pdev = &at91sam9260_dbgu_device;
-+ configure_dbgu_pins();
-+ at91_clock_associate("mck", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9260_ID_US0:
-+ pdev = &at91sam9260_uart0_device;
-+ configure_usart0_pins(pins);
-+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9260_ID_US1:
-+ pdev = &at91sam9260_uart1_device;
-+ configure_usart1_pins(pins);
-+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9260_ID_US2:
-+ pdev = &at91sam9260_uart2_device;
-+ configure_usart2_pins(pins);
-+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9260_ID_US3:
-+ pdev = &at91sam9260_uart3_device;
-+ configure_usart3_pins(pins);
-+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9260_ID_US4:
-+ pdev = &at91sam9260_uart4_device;
-+ configure_usart4_pins();
-+ at91_clock_associate("usart4_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9260_ID_US5:
-+ pdev = &at91sam9260_uart5_device;
-+ configure_usart5_pins();
-+ at91_clock_associate("usart5_clk", &pdev->dev, "usart");
-+ break;
-+ default:
-+ return;
-+ }
-+ pdev->id = portnr; /* update to mapped ID */
-+
-+ if (portnr < ATMEL_MAX_UART)
-+ at91_uarts[portnr] = pdev;
-+}
-+
-+void __init at91_set_serial_console(unsigned portnr)
-+{
-+ if (portnr < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[portnr];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
- void __init at91_add_device_serial(void)
- {
- int i;
-@@ -886,7 +1170,9 @@
- }
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-+void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
- #endif
-
-@@ -898,6 +1184,9 @@
- */
- static int __init at91_add_standard_devices(void)
- {
-+ at91_add_device_rtt();
-+ at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9261.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-03-01 19:03:29.000000000 +0200
-@@ -11,12 +11,14 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/arch/at91sam9261.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -245,6 +247,11 @@
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9261_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9261 processor initialization
-@@ -256,6 +263,7 @@
- iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
-
- at91_arch_reset = at91sam9261_reset;
-+ pm_power_off = at91sam9261_poweroff;
- at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
- | (1 << AT91SAM9261_ID_IRQ2);
-
-@@ -279,25 +287,25 @@
- static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
- 0,
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 5, /* Serial Synchronous Controller 2 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* LCD Controller */
- 0,
- 0,
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:09:18.000000000 +0200
-@@ -13,6 +13,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/i2c-gpio.h>
-
-@@ -23,7 +24,7 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9261.h>
- #include <asm/arch/at91sam9261_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam926x_smc.h>
-
- #include "generic.h"
-
-@@ -33,7 +34,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
--static u64 ohci_dmamask = 0xffffffffUL;
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
- static struct at91_usbh_data usbh_data;
-
- static struct resource usbh_resources[] = {
-@@ -54,7 +55,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
-@@ -106,8 +107,6 @@
-
- void __init at91_add_device_udc(struct at91_udc_data *data)
- {
-- unsigned long x;
--
- if (!data)
- return;
-
-@@ -116,9 +115,7 @@
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
-- /* Pullup pin is handled internally */
-- x = at91_sys_read(AT91_MATRIX_USBPUCR);
-- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
-+ /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91sam9261_udc_device);
-@@ -132,7 +129,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
--static u64 mmc_dmamask = 0xffffffffUL;
-+static u64 mmc_dmamask = DMA_BIT_MASK(32);
- static struct at91_mmc_data mmc_data;
-
- static struct resource mmc_resources[] = {
-@@ -153,7 +150,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
-@@ -232,7 +229,7 @@
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
-- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
-+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-@@ -354,7 +351,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
--static u64 spi_dmamask = 0xffffffffUL;
-+static u64 spi_dmamask = DMA_BIT_MASK(32);
-
- static struct resource spi0_resources[] = {
- [0] = {
-@@ -374,7 +371,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-@@ -400,7 +397,7 @@
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-@@ -466,7 +463,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
--static u64 lcdc_dmamask = 0xffffffffUL;
-+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
- static struct atmel_lcdfb_info lcdc_data;
-
- static struct resource lcdc_resources[] = {
-@@ -494,7 +491,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
-@@ -507,6 +504,17 @@
- return;
- }
-
-+#if defined(CONFIG_FB_ATMEL_STN)
-+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
-+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
-+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
-+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
-+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
-+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
-+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
-+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
-+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
-+#else
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
-@@ -529,6 +537,7 @@
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-+#endif
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-@@ -539,24 +548,270 @@
-
-
- /* --------------------------------------------------------------------
-- * LEDs
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9261_BASE_TCB0,
-+ .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9261_ID_TC0,
-+ .end = AT91SAM9261_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9261_ID_TC1,
-+ .end = AT91SAM9261_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9261_ID_TC2,
-+ .end = AT91SAM9261_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9261_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9261_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * RTT
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource rtt_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT,
-+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91sam9261_rtt_device = {
-+ .name = "at91_rtt",
-+ .id = -1,
-+ .resource = rtt_resources,
-+ .num_resources = ARRAY_SIZE(rtt_resources),
-+};
-+
-+static void __init at91_add_device_rtt(void)
-+{
-+ device_init_wakeup(&at91sam9261_rtt_device.dev, 1);
-+ platform_device_register(&at91sam9261_rtt_device);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * Watchdog
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
-+static struct platform_device at91sam9261_wdt_device = {
-+ .name = "at91_wdt",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static void __init at91_add_device_watchdog(void)
-+{
-+ platform_device_register(&at91sam9261_wdt_device);
-+}
-+#else
-+static void __init at91_add_device_watchdog(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_LEDS)
--u8 at91_leds_cpu;
--u8 at91_leds_timer;
-+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9261_BASE_SSC0,
-+ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9261_ID_SSC0,
-+ .end = AT91SAM9261_ID_SSC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9261_ssc0_device = {
-+ .name = "ssc",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &ssc0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc0_resources,
-+ .num_resources = ARRAY_SIZE(ssc0_resources),
-+};
-+
-+static inline void configure_ssc0_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB21, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB22, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB23, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB24, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB25, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB26, 1);
-+}
-+
-+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9261_BASE_SSC1,
-+ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9261_ID_SSC1,
-+ .end = AT91SAM9261_ID_SSC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9261_ssc1_device = {
-+ .name = "ssc",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ssc1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc1_resources,
-+ .num_resources = ARRAY_SIZE(ssc1_resources),
-+};
-+
-+static inline void configure_ssc1_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_B_periph(AT91_PIN_PA17, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_B_periph(AT91_PIN_PA18, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_B_periph(AT91_PIN_PA19, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_B_periph(AT91_PIN_PA20, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_B_periph(AT91_PIN_PA21, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_B_periph(AT91_PIN_PA22, 1);
-+}
-+
-+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc2_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9261_BASE_SSC2,
-+ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9261_ID_SSC2,
-+ .end = AT91SAM9261_ID_SSC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9261_ssc2_device = {
-+ .name = "ssc",
-+ .id = 2,
-+ .dev = {
-+ .dma_mask = &ssc2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc2_resources,
-+ .num_resources = ARRAY_SIZE(ssc2_resources),
-+};
-
--void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+static inline void configure_ssc2_pins(unsigned pins)
- {
-- /* Enable GPIO to access the LEDs */
-- at91_set_gpio_output(cpu_led, 1);
-- at91_set_gpio_output(timer_led, 1);
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_B_periph(AT91_PIN_PC25, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_B_periph(AT91_PIN_PC26, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_B_periph(AT91_PIN_PC27, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_B_periph(AT91_PIN_PC28, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_B_periph(AT91_PIN_PC29, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_B_periph(AT91_PIN_PC30, 1);
-+}
-+
-+/*
-+ * SSC controllers are accessed through library code, instead of any
-+ * kind of all-singing/all-dancing driver. For example one could be
-+ * used by a particular I2S audio codec's driver, while another one
-+ * on the same system might be used by a custom data capture driver.
-+ */
-+void __init at91_add_device_ssc(unsigned id, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ /*
-+ * NOTE: caller is responsible for passing information matching
-+ * "pins" to whatever will be using each particular controller.
-+ */
-+ switch (id) {
-+ case AT91SAM9261_ID_SSC0:
-+ pdev = &at91sam9261_ssc0_device;
-+ configure_ssc0_pins(pins);
-+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
-+ break;
-+ case AT91SAM9261_ID_SSC1:
-+ pdev = &at91sam9261_ssc1_device;
-+ configure_ssc1_pins(pins);
-+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
-+ break;
-+ case AT91SAM9261_ID_SSC2:
-+ pdev = &at91sam9261_ssc2_device;
-+ configure_ssc2_pins(pins);
-+ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
-+ break;
-+ default:
-+ return;
-+ }
-
-- at91_leds_cpu = cpu_led;
-- at91_leds_timer = timer_led;
-+ platform_device_register(pdev);
- }
-+
- #else
--void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
- #endif
-
-
-@@ -583,13 +838,15 @@
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
- };
-+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9261_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
-- .platform_data = &dbgu_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &dbgu_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-@@ -618,24 +875,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9261_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
-- .platform_data = &uart0_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
- };
-
--static inline void configure_usart0_pins(void)
-+static inline void configure_usart0_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
-- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
-- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
- }
-
- static struct resource uart1_resources[] = {
-@@ -655,22 +917,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9261_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
-- .platform_data = &uart1_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
- };
-
--static inline void configure_usart1_pins(void)
-+static inline void configure_usart1_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
- }
-
- static struct resource uart2_resources[] = {
-@@ -690,28 +959,35 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9261_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
-- .platform_data = &uart2_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
- };
-
--static inline void configure_usart2_pins(void)
-+static inline void configure_usart2_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
- }
-
--struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
--void __init at91_init_serial(struct at91_uart_config *config)
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
- {
- int i;
-
-@@ -719,17 +995,17 @@
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
-- configure_usart0_pins();
-+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91sam9261_uart0_device;
- at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
- break;
- case 1:
-- configure_usart1_pins();
-+ configure_usart1_pins(0);
- at91_uarts[i] = &at91sam9261_uart1_device;
- at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
- break;
- case 2:
-- configure_usart2_pins();
-+ configure_usart2_pins(0);
- at91_uarts[i] = &at91sam9261_uart2_device;
- at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
- break;
-@@ -751,6 +1027,48 @@
- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0: /* DBGU */
-+ pdev = &at91sam9261_dbgu_device;
-+ configure_dbgu_pins();
-+ at91_clock_associate("mck", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9261_ID_US0:
-+ pdev = &at91sam9261_uart0_device;
-+ configure_usart0_pins(pins);
-+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9261_ID_US1:
-+ pdev = &at91sam9261_uart1_device;
-+ configure_usart1_pins(pins);
-+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9261_ID_US2:
-+ pdev = &at91sam9261_uart2_device;
-+ configure_usart2_pins(pins);
-+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-+ break;
-+ default:
-+ return;
-+ }
-+ pdev->id = portnr; /* update to mapped ID */
-+
-+ if (portnr < ATMEL_MAX_UART)
-+ at91_uarts[portnr] = pdev;
-+}
-+
-+void __init at91_set_serial_console(unsigned portnr)
-+{
-+ if (portnr < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[portnr];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
- void __init at91_add_device_serial(void)
- {
- int i;
-@@ -761,7 +1079,9 @@
- }
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-+void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
- #endif
-
-@@ -774,6 +1094,9 @@
- */
- static int __init at91_add_standard_devices(void)
- {
-+ at91_add_device_rtt();
-+ at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9263.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-03-01 19:03:55.000000000 +0200
-@@ -11,12 +11,14 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/arch/at91sam9263.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -271,6 +273,11 @@
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9263_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9263 processor initialization
-@@ -282,6 +289,7 @@
- iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
-
- at91_arch_reset = at91sam9263_reset;
-+ pm_power_off = at91sam9263_poweroff;
- at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
-
- /* Init clock subsystem */
-@@ -304,34 +312,34 @@
- static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C, D and E */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C, D and E */
- 0,
- 0,
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
-- 4, /* CAN */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 6, /* AC97 Controller */
-+ 3, /* CAN */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0,
- 0, /* 2D Graphic Engine */
-- 3, /* USB Device Port */
-+ 2, /* USB Device Port */
- 0, /* Image Sensor Interface */
- 3, /* LDC Controller */
- 0, /* DMA Controller */
- 0,
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
- };
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:09:36.000000000 +0200
-@@ -12,6 +12,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/i2c-gpio.h>
-
-@@ -21,7 +22,7 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9263.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam926x_smc.h>
- #include <asm/arch/at91sam9263_matrix.h>
-
- #include "generic.h"
-@@ -32,7 +33,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
--static u64 ohci_dmamask = 0xffffffffUL;
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
- static struct at91_usbh_data usbh_data;
-
- static struct resource usbh_resources[] = {
-@@ -53,7 +54,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
-@@ -136,7 +137,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
--static u64 eth_dmamask = 0xffffffffUL;
-+static u64 eth_dmamask = DMA_BIT_MASK(32);
- static struct at91_eth_data eth_data;
-
- static struct resource eth_resources[] = {
-@@ -157,7 +158,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &eth_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &eth_data,
- },
- .resource = eth_resources,
-@@ -210,7 +211,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
--static u64 mmc_dmamask = 0xffffffffUL;
-+static u64 mmc_dmamask = DMA_BIT_MASK(32);
- static struct at91_mmc_data mmc0_data, mmc1_data;
-
- static struct resource mmc0_resources[] = {
-@@ -231,7 +232,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
-@@ -256,7 +257,7 @@
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
-@@ -357,10 +358,15 @@
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC0,
-+ .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
- }
- };
-
-@@ -382,7 +388,7 @@
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
-- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
-+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-@@ -500,7 +506,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
--static u64 spi_dmamask = 0xffffffffUL;
-+static u64 spi_dmamask = DMA_BIT_MASK(32);
-
- static struct resource spi0_resources[] = {
- [0] = {
-@@ -520,7 +526,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-@@ -546,7 +552,7 @@
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-@@ -612,7 +618,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
--static u64 ac97_dmamask = 0xffffffffUL;
-+static u64 ac97_dmamask = DMA_BIT_MASK(32);
- static struct atmel_ac97_data ac97_data;
-
- static struct resource ac97_resources[] = {
-@@ -633,7 +639,7 @@
- .id = 1,
- .dev = {
- .dma_mask = &ac97_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
-@@ -663,11 +669,61 @@
-
-
- /* --------------------------------------------------------------------
-+ * Image Sensor Interface
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-+
-+struct resource isi_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_ISI,
-+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_ISI,
-+ .end = AT91SAM9263_ID_ISI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_isi_device = {
-+ .name = "at91_isi",
-+ .id = -1,
-+ .resource = isi_resources,
-+ .num_resources = ARRAY_SIZE(isi_resources),
-+};
-+
-+void __init at91_add_device_isi(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
-+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
-+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
-+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
-+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
-+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
-+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
-+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
-+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
-+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
-+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
-+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
-+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
-+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
-+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
-+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-+}
-+#else
-+void __init at91_add_device_isi(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
--static u64 lcdc_dmamask = 0xffffffffUL;
-+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
- static struct atmel_lcdfb_info lcdc_data;
-
- static struct resource lcdc_resources[] = {
-@@ -688,7 +744,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
-@@ -732,24 +788,227 @@
-
-
- /* --------------------------------------------------------------------
-- * LEDs
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_TCB0,
-+ .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_TCB,
-+ .end = AT91SAM9263_ID_TCB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has one clock and irq for all three TC channels */
-+ at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
-+ platform_device_register(&at91sam9263_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+/* --------------------------------------------------------------------
-+ * RTT
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource rtt0_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT0,
-+ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91sam9263_rtt0_device = {
-+ .name = "at91_rtt",
-+ .id = 0,
-+ .resource = rtt0_resources,
-+ .num_resources = ARRAY_SIZE(rtt0_resources),
-+};
-+
-+static struct resource rtt1_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT1,
-+ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91sam9263_rtt1_device = {
-+ .name = "at91_rtt",
-+ .id = 1,
-+ .resource = rtt1_resources,
-+ .num_resources = ARRAY_SIZE(rtt1_resources),
-+};
-+
-+static void __init at91_add_device_rtt(void)
-+{
-+ device_init_wakeup(&at91sam9263_rtt0_device.dev, 1);
-+ platform_device_register(&at91sam9263_rtt0_device);
-+ device_init_wakeup(&at91sam9263_rtt1_device.dev, 1);
-+ platform_device_register(&at91sam9263_rtt1_device);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * Watchdog
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
-+static struct platform_device at91sam9263_wdt_device = {
-+ .name = "at91_wdt",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static void __init at91_add_device_watchdog(void)
-+{
-+ platform_device_register(&at91sam9263_wdt_device);
-+}
-+#else
-+static void __init at91_add_device_watchdog(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_LEDS)
--u8 at91_leds_cpu;
--u8 at91_leds_timer;
-+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
--void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+static struct resource ssc0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_SSC0,
-+ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_SSC0,
-+ .end = AT91SAM9263_ID_SSC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_ssc0_device = {
-+ .name = "ssc",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &ssc0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc0_resources,
-+ .num_resources = ARRAY_SIZE(ssc0_resources),
-+};
-+
-+static inline void configure_ssc0_pins(unsigned pins)
- {
-- /* Enable GPIO to access the LEDs */
-- at91_set_gpio_output(cpu_led, 1);
-- at91_set_gpio_output(timer_led, 1);
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_B_periph(AT91_PIN_PB0, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_B_periph(AT91_PIN_PB1, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_B_periph(AT91_PIN_PB2, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_B_periph(AT91_PIN_PB3, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_B_periph(AT91_PIN_PB4, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_B_periph(AT91_PIN_PB5, 1);
-+}
-+
-+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-- at91_leds_cpu = cpu_led;
-- at91_leds_timer = timer_led;
-+static struct resource ssc1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_SSC1,
-+ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_SSC1,
-+ .end = AT91SAM9263_ID_SSC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_ssc1_device = {
-+ .name = "ssc",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ssc1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc1_resources,
-+ .num_resources = ARRAY_SIZE(ssc1_resources),
-+};
-+
-+static inline void configure_ssc1_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PB6, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PB7, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PB8, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PB9, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_A_periph(AT91_PIN_PB10, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_A_periph(AT91_PIN_PB11, 1);
-+}
-+
-+/*
-+ * SSC controllers are accessed through library code, instead of any
-+ * kind of all-singing/all-dancing driver. For example one could be
-+ * used by a particular I2S audio codec's driver, while another one
-+ * on the same system might be used by a custom data capture driver.
-+ */
-+void __init at91_add_device_ssc(unsigned id, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ /*
-+ * NOTE: caller is responsible for passing information matching
-+ * "pins" to whatever will be using each particular controller.
-+ */
-+ switch (id) {
-+ case AT91SAM9263_ID_SSC0:
-+ pdev = &at91sam9263_ssc0_device;
-+ configure_ssc0_pins(pins);
-+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
-+ break;
-+ case AT91SAM9263_ID_SSC1:
-+ pdev = &at91sam9263_ssc1_device;
-+ configure_ssc1_pins(pins);
-+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ platform_device_register(pdev);
- }
-+
- #else
--void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
- #endif
-
-
-@@ -777,13 +1036,15 @@
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
- };
-+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9263_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
-- .platform_data = &dbgu_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &dbgu_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-@@ -812,24 +1073,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9263_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
-- .platform_data = &uart0_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
- };
-
--static inline void configure_usart0_pins(void)
-+static inline void configure_usart0_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
-- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
-- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
- }
-
- static struct resource uart1_resources[] = {
-@@ -849,24 +1115,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9263_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
-- .platform_data = &uart1_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
- };
-
--static inline void configure_usart1_pins(void)
-+static inline void configure_usart1_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
-- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
- }
-
- static struct resource uart2_resources[] = {
-@@ -886,30 +1157,35 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9263_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
-- .platform_data = &uart2_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
- };
-
--static inline void configure_usart2_pins(void)
-+static inline void configure_usart2_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
-- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
- }
-
--struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
--void __init at91_init_serial(struct at91_uart_config *config)
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
- {
- int i;
-
-@@ -917,17 +1193,17 @@
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
-- configure_usart0_pins();
-+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91sam9263_uart0_device;
- at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
- break;
- case 1:
-- configure_usart1_pins();
-+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91sam9263_uart1_device;
- at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
- break;
- case 2:
-- configure_usart2_pins();
-+ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91sam9263_uart2_device;
- at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
- break;
-@@ -949,6 +1225,48 @@
- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0: /* DBGU */
-+ pdev = &at91sam9263_dbgu_device;
-+ configure_dbgu_pins();
-+ at91_clock_associate("mck", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9263_ID_US0:
-+ pdev = &at91sam9263_uart0_device;
-+ configure_usart0_pins(pins);
-+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9263_ID_US1:
-+ pdev = &at91sam9263_uart1_device;
-+ configure_usart1_pins(pins);
-+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9263_ID_US2:
-+ pdev = &at91sam9263_uart2_device;
-+ configure_usart2_pins(pins);
-+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-+ break;
-+ default:
-+ return;
-+ }
-+ pdev->id = portnr; /* update to mapped ID */
-+
-+ if (portnr < ATMEL_MAX_UART)
-+ at91_uarts[portnr] = pdev;
-+}
-+
-+void __init at91_set_serial_console(unsigned portnr)
-+{
-+ if (portnr < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[portnr];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
- void __init at91_add_device_serial(void)
- {
- int i;
-@@ -959,7 +1277,9 @@
- }
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-+void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
- #endif
-
-@@ -971,6 +1291,9 @@
- */
- static int __init at91_add_standard_devices(void)
- {
-+ at91_add_device_rtt();
-+ at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-02-25 22:18:18.000000000 +0200
-@@ -1,23 +1,20 @@
- /*
-- * linux/arch/arm/mach-at91/at91sam926x_time.c
-+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
- *
- * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
- * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
-+ * Converted to ClockSource/ClockEvents by David Brownell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--
--#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/kernel.h>
--#include <linux/sched.h>
--#include <linux/time.h>
-+#include <linux/clk.h>
-+#include <linux/clockchips.h>
-
--#include <asm/hardware.h>
--#include <asm/io.h>
- #include <asm/mach/time.h>
-
- #include <asm/arch/at91_pit.h>
-@@ -26,88 +23,166 @@
- #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
- #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
-
-+static u32 pit_cycle; /* write-once */
-+static u32 pit_cnt; /* access only w/system irq blocked */
-+
-+
- /*
-- * Returns number of microseconds since last timer interrupt. Note that interrupts
-- * will have been disabled by do_gettimeofday()
-- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
-+ * Clocksource: just a monotonic counter of MCK/16 cycles.
-+ * We don't care whether or not PIT irqs are enabled.
- */
--static unsigned long at91sam926x_gettimeoffset(void)
-+static cycle_t read_pit_clk(void)
- {
-- unsigned long elapsed;
-- unsigned long t = at91_sys_read(AT91_PIT_PIIR);
-+ unsigned long flags;
-+ u32 elapsed;
-+ u32 t;
-+
-+ raw_local_irq_save(flags);
-+ elapsed = pit_cnt;
-+ t = at91_sys_read(AT91_PIT_PIIR);
-+ raw_local_irq_restore(flags);
-+
-+ elapsed += PIT_PICNT(t) * pit_cycle;
-+ elapsed += PIT_CPIV(t);
-+ return elapsed;
-+}
-
-- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
-+static struct clocksource pit_clk = {
-+ .name = "pit",
-+ .rating = 175,
-+ .read = read_pit_clk,
-+ .shift = 20,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+
-+/*
-+ * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
-+ */
-+static void
-+pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-+{
-+ unsigned long flags;
-
-- return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_PERIODIC:
-+ case CLOCK_EVT_MODE_RESUME:
-+ /* update clocksource counter, then enable the IRQ */
-+ raw_local_irq_save(flags);
-+ pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
-+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
-+ | AT91_PIT_PITIEN);
-+ raw_local_irq_restore(flags);
-+ break;
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ BUG();
-+ /* FALLTHROUGH */
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ case CLOCK_EVT_MODE_UNUSED:
-+ /* disable irq, leaving the clocksource active */
-+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-+ break;
-+ }
- }
-
-+static struct clock_event_device pit_clkevt = {
-+ .name = "pit",
-+ .features = CLOCK_EVT_FEAT_PERIODIC,
-+ .shift = 32,
-+ .rating = 100,
-+ .cpumask = CPU_MASK_CPU0,
-+ .set_mode = pit_clkevt_mode,
-+};
-+
-+
- /*
- * IRQ handler for the timer.
- */
--static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
-+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
- {
-- volatile long nr_ticks;
-
-- if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
-- write_seqlock(&xtime_lock);
-+ /* The PIT interrupt may be disabled, and is shared */
-+ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-+ && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
-+ unsigned nr_ticks;
-
-- /* Get number to ticks performed before interrupt and clear PIT interrupt */
-+ /* Get number of ticks performed before irq, and ack it */
- nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
- do {
-- timer_tick();
-+ pit_cnt += pit_cycle;
-+ pit_clkevt.event_handler(&pit_clkevt);
- nr_ticks--;
- } while (nr_ticks);
-
-- write_sequnlock(&xtime_lock);
- return IRQ_HANDLED;
-- } else
-- return IRQ_NONE; /* not handled */
-+ }
-+
-+ return IRQ_NONE;
- }
-
--static struct irqaction at91sam926x_timer_irq = {
-+static struct irqaction at91sam926x_pit_irq = {
- .name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-- .handler = at91sam926x_timer_interrupt
-+ .handler = at91sam926x_pit_interrupt
- };
-
--void at91sam926x_timer_reset(void)
-+static void at91sam926x_pit_reset(void)
- {
-- /* Disable timer */
-+ /* Disable timer and irqs */
- at91_sys_write(AT91_PIT_MR, 0);
-
-- /* Clear any pending interrupts */
-- (void) at91_sys_read(AT91_PIT_PIVR);
-+ /* Clear any pending interrupts, wait for PIT to stop counting */
-+ while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
-+ cpu_relax();
-
-- /* Set Period Interval timer and enable its interrupt */
-- at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
-+ /* Start PIT but don't enable IRQ */
-+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
- }
-
- /*
-- * Set up timer interrupt.
-+ * Set up both clocksource and clockevent support.
- */
--void __init at91sam926x_timer_init(void)
-+static void __init at91sam926x_pit_init(void)
- {
-+ unsigned long pit_rate;
-+ unsigned bits;
-+
-+ /*
-+ * Use our actual MCK to figure out how many MCK/16 ticks per
-+ * 1/HZ period (instead of a compile-time constant LATCH).
-+ */
-+ pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
-+ pit_cycle = (pit_rate + HZ/2) / HZ;
-+ WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
-+
- /* Initialize and enable the timer */
-- at91sam926x_timer_reset();
-+ at91sam926x_pit_reset();
-
-- /* Make IRQs happen for the system timer. */
-- setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
-+ /*
-+ * Register clocksource. The high order bits of PIV are unused,
-+ * so this isn't a 32-bit counter unless we get clockevent irqs.
-+ */
-+ pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
-+ bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
-+ pit_clk.mask = CLOCKSOURCE_MASK(bits);
-+ clocksource_register(&pit_clk);
-+
-+ /* Set up irq handler */
-+ setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
-+
-+ /* Set up and register clockevents */
-+ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
-+ clockevents_register_device(&pit_clkevt);
- }
-
--#ifdef CONFIG_PM
--static void at91sam926x_timer_suspend(void)
-+static void at91sam926x_pit_suspend(void)
- {
- /* Disable timer */
- at91_sys_write(AT91_PIT_MR, 0);
- }
--#else
--#define at91sam926x_timer_suspend NULL
--#endif
-
- struct sys_timer at91sam926x_timer = {
-- .init = at91sam926x_timer_init,
-- .offset = at91sam926x_gettimeoffset,
-- .suspend = at91sam926x_timer_suspend,
-- .resume = at91sam926x_timer_reset,
-+ .init = at91sam926x_pit_init,
-+ .suspend = at91sam926x_pit_suspend,
-+ .resume = at91sam926x_pit_reset,
- };
--
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-03-01 19:04:12.000000000 +0200
-@@ -10,6 +10,7 @@
- */
-
- #include <linux/module.h>
-+#include <linux/pm.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-@@ -17,6 +18,7 @@
- #include <asm/arch/at91sam9rl.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
- #include "clock.h"
-@@ -244,6 +246,11 @@
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-+static void at91sam9rl_poweroff(void)
-+{
-+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-+}
-+
-
- /* --------------------------------------------------------------------
- * AT91SAM9RL processor initialization
-@@ -274,6 +281,7 @@
- iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
-
- at91_arch_reset = at91sam9rl_reset;
-+ pm_power_off = at91sam9rl_poweroff;
- at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
-
- /* Init clock subsystem */
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:10:11.000000000 +0200
-@@ -9,6 +9,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/i2c-gpio.h>
-
-@@ -19,7 +20,7 @@
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91sam9rl.h>
- #include <asm/arch/at91sam9rl_matrix.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam926x_smc.h>
-
- #include "generic.h"
-
-@@ -29,7 +30,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
--static u64 mmc_dmamask = 0xffffffffUL;
-+static u64 mmc_dmamask = DMA_BIT_MASK(32);
- static struct at91_mmc_data mmc_data;
-
- static struct resource mmc_resources[] = {
-@@ -50,7 +51,7 @@
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
-@@ -104,10 +105,15 @@
- #define NAND_BASE AT91_CHIPSELECT_3
-
- static struct resource nand_resources[] = {
-- {
-+ [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_BASE_SYS + AT91_ECC,
-+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
- }
- };
-
-@@ -247,7 +253,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
--static u64 spi_dmamask = 0xffffffffUL;
-+static u64 spi_dmamask = DMA_BIT_MASK(32);
-
- static struct resource spi_resources[] = {
- [0] = {
-@@ -267,7 +273,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi_resources,
- .num_resources = ARRAY_SIZE(spi_resources),
-@@ -312,7 +318,7 @@
- * -------------------------------------------------------------------- */
-
- #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
--static u64 lcdc_dmamask = 0xffffffffUL;
-+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
- static struct atmel_lcdfb_info lcdc_data;
-
- static struct resource lcdc_resources[] = {
-@@ -340,7 +346,7 @@
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
-@@ -384,24 +390,244 @@
-
-
- /* --------------------------------------------------------------------
-- * LEDs
-+ * Timer/Counter block
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+static struct resource tcb_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_TCB0,
-+ .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_TC0,
-+ .end = AT91SAM9RL_ID_TC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [2] = {
-+ .start = AT91SAM9RL_ID_TC1,
-+ .end = AT91SAM9RL_ID_TC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = AT91SAM9RL_ID_TC2,
-+ .end = AT91SAM9RL_ID_TC2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_tcb_device = {
-+ .name = "atmel_tcb",
-+ .id = 0,
-+ .resource = tcb_resources,
-+ .num_resources = ARRAY_SIZE(tcb_resources),
-+};
-+
-+static void __init at91_add_device_tc(void)
-+{
-+ /* this chip has a separate clock and irq for each TC channel */
-+ at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
-+ at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
-+ at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
-+ platform_device_register(&at91sam9rl_tcb_device);
-+}
-+#else
-+static void __init at91_add_device_tc(void) { }
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * RTC
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-+static struct platform_device at91sam9rl_rtc_device = {
-+ .name = "at91_rtc",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static void __init at91_add_device_rtc(void)
-+{
-+ device_init_wakeup(&at91sam9rl_rtc_device.dev, 1);
-+ platform_device_register(&at91sam9rl_rtc_device);
-+}
-+#else
-+static void __init at91_add_device_rtc(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * RTT
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource rtt_resources[] = {
-+ {
-+ .start = AT91_BASE_SYS + AT91_RTT,
-+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91sam9rl_rtt_device = {
-+ .name = "at91_rtt",
-+ .id = -1,
-+ .resource = rtt_resources,
-+ .num_resources = ARRAY_SIZE(rtt_resources),
-+};
-+
-+static void __init at91_add_device_rtt(void)
-+{
-+ device_init_wakeup(&at91sam9rl_rtt_device.dev, 1);
-+ platform_device_register(&at91sam9rl_rtt_device);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * Watchdog
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
-+static struct platform_device at91sam9rl_wdt_device = {
-+ .name = "at91_wdt",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static void __init at91_add_device_watchdog(void)
-+{
-+ platform_device_register(&at91sam9rl_wdt_device);
-+}
-+#else
-+static void __init at91_add_device_watchdog(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_LEDS)
--u8 at91_leds_cpu;
--u8 at91_leds_timer;
-+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_SSC0,
-+ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_SSC0,
-+ .end = AT91SAM9RL_ID_SSC0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_ssc0_device = {
-+ .name = "ssc",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &ssc0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc0_resources,
-+ .num_resources = ARRAY_SIZE(ssc0_resources),
-+};
-+
-+static inline void configure_ssc0_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_A_periph(AT91_PIN_PC0, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_A_periph(AT91_PIN_PC1, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_A_periph(AT91_PIN_PA15, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_A_periph(AT91_PIN_PA16, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_B_periph(AT91_PIN_PA10, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_B_periph(AT91_PIN_PA22, 1);
-+}
-+
-+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ssc1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_SSC1,
-+ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_SSC1,
-+ .end = AT91SAM9RL_ID_SSC1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_ssc1_device = {
-+ .name = "ssc",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ssc1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ },
-+ .resource = ssc1_resources,
-+ .num_resources = ARRAY_SIZE(ssc1_resources),
-+};
-+
-+static inline void configure_ssc1_pins(unsigned pins)
-+{
-+ if (pins & ATMEL_SSC_TF)
-+ at91_set_B_periph(AT91_PIN_PA29, 1);
-+ if (pins & ATMEL_SSC_TK)
-+ at91_set_B_periph(AT91_PIN_PA30, 1);
-+ if (pins & ATMEL_SSC_TD)
-+ at91_set_B_periph(AT91_PIN_PA13, 1);
-+ if (pins & ATMEL_SSC_RD)
-+ at91_set_B_periph(AT91_PIN_PA14, 1);
-+ if (pins & ATMEL_SSC_RK)
-+ at91_set_B_periph(AT91_PIN_PA9, 1);
-+ if (pins & ATMEL_SSC_RF)
-+ at91_set_B_periph(AT91_PIN_PA8, 1);
-+}
-
--void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+/*
-+ * SSC controllers are accessed through library code, instead of any
-+ * kind of all-singing/all-dancing driver. For example one could be
-+ * used by a particular I2S audio codec's driver, while another one
-+ * on the same system might be used by a custom data capture driver.
-+ */
-+void __init at91_add_device_ssc(unsigned id, unsigned pins)
- {
-- /* Enable GPIO to access the LEDs */
-- at91_set_gpio_output(cpu_led, 1);
-- at91_set_gpio_output(timer_led, 1);
-+ struct platform_device *pdev;
-
-- at91_leds_cpu = cpu_led;
-- at91_leds_timer = timer_led;
-+ /*
-+ * NOTE: caller is responsible for passing information matching
-+ * "pins" to whatever will be using each particular controller.
-+ */
-+ switch (id) {
-+ case AT91SAM9RL_ID_SSC0:
-+ pdev = &at91sam9rl_ssc0_device;
-+ configure_ssc0_pins(pins);
-+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
-+ break;
-+ case AT91SAM9RL_ID_SSC1:
-+ pdev = &at91sam9rl_ssc1_device;
-+ configure_ssc1_pins(pins);
-+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ platform_device_register(pdev);
- }
-+
- #else
--void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
- #endif
-
-
-@@ -428,13 +654,15 @@
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
- };
-+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9rl_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
-- .platform_data = &dbgu_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &dbgu_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-@@ -463,24 +691,37 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9rl_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
-- .platform_data = &uart0_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart0_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
- };
-
--static inline void configure_usart0_pins(void)
-+static inline void configure_usart0_pins(unsigned pins)
- {
-- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
-- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
-- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
-+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
-+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
-+ if (pins & ATMEL_UART_DSR)
-+ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
-+ if (pins & ATMEL_UART_DTR)
-+ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
-+ if (pins & ATMEL_UART_DCD)
-+ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
-+ if (pins & ATMEL_UART_RI)
-+ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
- }
-
- static struct resource uart1_resources[] = {
-@@ -500,22 +741,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9rl_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
-- .platform_data = &uart1_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart1_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
- };
-
--static inline void configure_usart1_pins(void)
-+static inline void configure_usart1_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
- }
-
- static struct resource uart2_resources[] = {
-@@ -535,22 +783,29 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9rl_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
-- .platform_data = &uart2_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart2_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
- };
-
--static inline void configure_usart2_pins(void)
-+static inline void configure_usart2_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
- }
-
- static struct resource uart3_resources[] = {
-@@ -570,28 +825,35 @@
- .use_dma_tx = 1,
- .use_dma_rx = 1,
- };
-+static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
- static struct platform_device at91sam9rl_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
-- .platform_data = &uart3_data,
-- .coherent_dma_mask = 0xffffffff,
-+ .dma_mask = &uart3_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
- };
-
--static inline void configure_usart3_pins(void)
-+static inline void configure_usart3_pins(unsigned pins)
- {
- at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
-+
-+ if (pins & ATMEL_UART_RTS)
-+ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
-+ if (pins & ATMEL_UART_CTS)
-+ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
- }
-
--struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
- struct platform_device *atmel_default_console_device; /* the serial console device */
-
--void __init at91_init_serial(struct at91_uart_config *config)
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
- {
- int i;
-
-@@ -599,22 +861,22 @@
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
-- configure_usart0_pins();
-+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91sam9rl_uart0_device;
- at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
- break;
- case 1:
-- configure_usart1_pins();
-+ configure_usart1_pins(0);
- at91_uarts[i] = &at91sam9rl_uart1_device;
- at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
- break;
- case 2:
-- configure_usart2_pins();
-+ configure_usart2_pins(0);
- at91_uarts[i] = &at91sam9rl_uart2_device;
- at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
- break;
- case 3:
-- configure_usart3_pins();
-+ configure_usart3_pins(0);
- at91_uarts[i] = &at91sam9rl_uart3_device;
- at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
- break;
-@@ -636,6 +898,53 @@
- printk(KERN_INFO "AT91: No default serial console defined.\n");
- }
-
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0: /* DBGU */
-+ pdev = &at91sam9rl_dbgu_device;
-+ configure_dbgu_pins();
-+ at91_clock_associate("mck", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9RL_ID_US0:
-+ pdev = &at91sam9rl_uart0_device;
-+ configure_usart0_pins(pins);
-+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9RL_ID_US1:
-+ pdev = &at91sam9rl_uart1_device;
-+ configure_usart1_pins(pins);
-+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9RL_ID_US2:
-+ pdev = &at91sam9rl_uart2_device;
-+ configure_usart2_pins(pins);
-+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-+ break;
-+ case AT91SAM9RL_ID_US3:
-+ pdev = &at91sam9rl_uart3_device;
-+ configure_usart3_pins(pins);
-+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
-+ break;
-+ default:
-+ return;
-+ }
-+ pdev->id = portnr; /* update to mapped ID */
-+
-+ if (portnr < ATMEL_MAX_UART)
-+ at91_uarts[portnr] = pdev;
-+}
-+
-+void __init at91_set_serial_console(unsigned portnr)
-+{
-+ if (portnr < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[portnr];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
- void __init at91_add_device_serial(void)
- {
- int i;
-@@ -646,7 +955,9 @@
- }
- }
- #else
--void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-+void __init at91_set_serial_console(unsigned portnr) {}
- void __init at91_add_device_serial(void) {}
- #endif
-
-@@ -659,6 +970,10 @@
- */
- static int __init at91_add_standard_devices(void)
- {
-+ at91_add_device_rtc();
-+ at91_add_device_rtt();
-+ at91_add_device_watchdog();
-+ at91_add_device_tc();
- return 0;
- }
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.24/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-03-01 20:40:51.000000000 +0200
-@@ -0,0 +1,188 @@
-+/*
-+ * KwikByte CAM60
-+ *
-+ * based on board-sam9260ek.c
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 5 = USART0 .. USART5
-+ * 6 = DBGU
-+ */
-+static struct at91_uart_config __initdata cam60_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 1,
-+ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
-+};
-+
-+static void __init cam60_map_io(void)
-+{
-+ /* Initialize processor: 10 MHz crystal */
-+ at91sam9260_initialize(10000000);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&cam60_uart_config);
-+}
-+
-+static void __init cam60_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host
-+ */
-+static struct at91_usbh_data __initdata cam60_usbh_data = {
-+ .ports = 1,
-+};
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata cam60_spi_partitions[] = {
-+ {
-+ .name = "BOOT1",
-+ .offset = 0,
-+ .size = 4 * 1056,
-+ },
-+ {
-+ .name = "BOOT2",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 256 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 2222 * 1056,
-+ },
-+ {
-+ .name = "file system",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
-+ .name = "spi_flash",
-+ .parts = cam60_spi_partitions,
-+ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
-+};
-+#endif
-+
-+static struct spi_board_info cam60_spi_devices[] = {
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ .platform_data = &cam60_spi_flash_platform_data
-+ },
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct __initdata at91_eth_data cam60_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PB5,
-+ .is_rmii = 0,
-+};
-+
-+
-+/*
-+ * NAND Flash
-+ */
-+static struct mtd_partition __initdata cam60_nand_partition[] = {
-+ {
-+ .name = "nand_fs",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(cam60_nand_partition);
-+ return cam60_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata cam60_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+ // .det_pin = ... not there
-+ .rdy_pin = AT91_PIN_PA9,
-+ .enable_pin = AT91_PIN_PA7,
-+ .partition_info = nand_partitions,
-+};
-+
-+
-+static void __init cam60_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* SPI */
-+ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-+ /* Ethernet */
-+ at91_add_device_eth(&cam60_macb_data);
-+ /* USB Host */
-+ /* enable USB power supply circuit */
-+ at91_set_gpio_output(AT91_PIN_PB18, 1);
-+ at91_add_device_usbh(&cam60_usbh_data);
-+ /* NAND */
-+ at91_add_device_nand(&cam60_nand_data);
-+}
-+
-+MACHINE_START(CAM60, "KwikByte CAM60")
-+ /* Maintainer: KwikByte */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = cam60_map_io,
-+ .init_irq = cam60_init_irq,
-+ .init_machine = cam60_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c
---- linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-03-01 20:43:07.000000000 +0200
-@@ -0,0 +1,359 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-cap9adk.c
-+ *
-+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
-+#include <linux/fb.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91cap9_matrix.h>
-+#include <asm/arch/at91sam926x_smc.h>
-+
-+#include "generic.h"
-+
-+
-+static void __init cap9adk_map_io(void)
-+{
-+ /* Initialize processor: 12 MHz crystal */
-+ at91cap9_initialize(12000000);
-+
-+ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
-+ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
-+ /* ... POWER LED always on */
-+ at91_set_gpio_output(AT91_PIN_PC29, 1);
-+
-+ /* Setup the serial ports and console */
-+ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
-+ at91_set_serial_console(0);
-+}
-+
-+static void __init cap9adk_init_irq(void)
-+{
-+ at91cap9_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata cap9adk_usbh_data = {
-+ .ports = 2,
-+};
-+
-+
-+/*
-+ * ADS7846 Touchscreen
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+static int ads7843_pendown_state(void)
-+{
-+ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+ .model = 7843,
-+ .x_min = 150,
-+ .x_max = 3830,
-+ .y_min = 190,
-+ .y_max = 3830,
-+ .vref_delay_usecs = 100,
-+ .x_plate_ohms = 450,
-+ .y_plate_ohms = 250,
-+ .pressure_max = 15000,
-+ .debounce_max = 1,
-+ .debounce_rep = 0,
-+ .debounce_tol = (~0),
-+ .get_pendown_state = ads7843_pendown_state,
-+};
-+
-+static void __init cap9adk_add_device_ts(void)
-+{
-+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
-+ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
-+}
-+#else
-+static void __init cap9adk_add_device_ts(void) {}
-+#endif
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info cap9adk_spi_devices[] = {
-+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-+ { /* DataFlash card */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+#endif
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+ {
-+ .modalias = "ads7846",
-+ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
-+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
-+ .bus_num = 0,
-+ .platform_data = &ads_info,
-+ .irq = AT91_PIN_PC4,
-+ },
-+#endif
-+};
-+
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata cap9adk_mmc_data = {
-+ .wire4 = 1,
-+// .det_pin = ... not connected
-+// .wp_pin = ... not connected
-+// .vcc_pin = ... not connected
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata cap9adk_macb_data = {
-+ .is_rmii = 1,
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
-+ {
-+ .name = "NAND partition",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
-+ return cap9adk_nand_partitions;
-+}
-+
-+static struct at91_nand_data __initdata cap9adk_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+// .rdy_pin = ... not connected
-+ .enable_pin = AT91_PIN_PD15,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+
-+/*
-+ * NOR flash
-+ */
-+static struct mtd_partition cap9adk_nor_partitions[] = {
-+ {
-+ .name = "NOR partition",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct physmap_flash_data cap9adk_nor_data = {
-+ .width = 2,
-+ .parts = cap9adk_nor_partitions,
-+ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
-+};
-+
-+#define NOR_BASE AT91_CHIPSELECT_0
-+#define NOR_SIZE 0x800000
-+
-+static struct resource nor_flash_resources[] = {
-+ {
-+ .start = NOR_BASE,
-+ .end = NOR_BASE + NOR_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device cap9adk_nor_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cap9adk_nor_data,
-+ },
-+ .resource = nor_flash_resources,
-+ .num_resources = ARRAY_SIZE(nor_flash_resources),
-+};
-+
-+static __init void cap9adk_add_device_nor(void)
-+{
-+ unsigned long csa;
-+
-+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-+
-+ /* set the bus interface characteristics */
-+ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
-+ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
-+
-+ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
-+ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
-+
-+ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-+
-+ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
-+ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-+
-+ platform_device_register(&cap9adk_nor_flash);
-+}
-+
-+
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D70VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+ if (on)
-+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
-+ else
-+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
-+#endif
-+
-+
-+/*
-+ * AC97
-+ */
-+static struct atmel_ac97_data cap9adk_ac97_data = {
-+// .reset_pin = ... not connected
-+};
-+
-+
-+static void __init cap9adk_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
-+ at91_add_device_usbh(&cap9adk_usbh_data);
-+ /* SPI */
-+ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
-+ /* Touchscreen */
-+ cap9adk_add_device_ts();
-+ /* MMC */
-+ at91_add_device_mmc(1, &cap9adk_mmc_data);
-+ /* Ethernet */
-+ at91_add_device_eth(&cap9adk_macb_data);
-+ /* NAND */
-+ at91_add_device_nand(&cap9adk_nand_data);
-+ /* NOR Flash */
-+ cap9adk_add_device_nor();
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* LCD Controller */
-+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
-+ at91_add_device_lcdc(&cap9adk_lcdc_data);
-+ /* AC97 */
-+ at91_add_device_ac97(&cap9adk_ac97_data);
-+}
-+
-+MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
-+ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = cap9adk_map_io,
-+ .init_irq = cap9adk_init_irq,
-+ .init_machine = cap9adk_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c
---- linux-2.6.24/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-chub.c 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,132 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-chub.c
-+ *
-+ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
-+ * by Kuten Ivan
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata chub_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 5,
-+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init chub_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static void __init chub_map_io(void)
-+{
-+ /* Initialize clocks: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&chub_uart_config);
-+}
-+
-+static struct at91_eth_data __initdata chub_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PB29,
-+ .is_rmii = 0,
-+};
-+
-+static struct mtd_partition __initdata chub_nand_partition[] = {
-+ {
-+ .name = "NAND Partition 1",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(chub_nand_partition);
-+ return chub_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata chub_nand_data = {
-+ .ale = 22,
-+ .cle = 21,
-+ .enable_pin = AT91_PIN_PA27,
-+ .partition_info = nand_partitions,
-+};
-+
-+static struct spi_board_info chub_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+};
-+
-+static void __init chub_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* Ethernet */
-+ at91_add_device_eth(&chub_eth_data);
-+ /* SPI */
-+ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
-+ /* NAND Flash */
-+ at91_add_device_nand(&chub_nand_data);
-+ /* Disable write protect for NAND */
-+ at91_set_gpio_output(AT91_PIN_PB7, 1);
-+ /* Power enable for 3x RS-232 and 1x RS-485 */
-+ at91_set_gpio_output(AT91_PIN_PB9, 1);
-+ /* Disable write protect for FRAM */
-+ at91_set_gpio_output(AT91_PIN_PA21, 1);
-+ /* Disable write protect for Dataflash */
-+ at91_set_gpio_output(AT91_PIN_PA19, 1);
-+}
-+
-+MACHINE_START(CHUB, "Promwad Chub")
-+ /* Maintainer: Ivan Kuten AT Promwad DOT com */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = chub_map_io,
-+ .init_irq = chub_init_irq,
-+ .init_machine = chub_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.24/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:04:55.000000000 +0200
-@@ -24,6 +24,9 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/interrupt.h>
-+#include <linux/input.h>
-+#include <linux/gpio_keys.h>
- #include <linux/mtd/physmap.h>
-
- #include <asm/hardware.h>
-@@ -59,6 +62,7 @@
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb337_uart_config);
-@@ -156,6 +160,84 @@
- .num_resources = ARRAY_SIZE(csb_flash_resources),
- };
-
-+static struct gpio_led csb337_leds[] = {
-+ { /* "led0", yellow */
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB2,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ },
-+ { /* "led1", green */
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB1,
-+ .active_low = 1,
-+ .default_trigger = "mmc0",
-+ },
-+ { /* "led2", yellow */
-+ .name = "led2",
-+ .gpio = AT91_PIN_PB0,
-+ .active_low = 1,
-+ .default_trigger = "ide-disk",
-+ }
-+};
-+
-+/*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button csb300_buttons[] = {
-+ {
-+ .gpio = AT91_PIN_PB29,
-+ .code = BTN_0,
-+ .desc = "sw0",
-+ .active_low = 1,
-+ .wakeup = 1,
-+ },
-+ {
-+ .gpio = AT91_PIN_PB28,
-+ .code = BTN_1,
-+ .desc = "sw1",
-+ .active_low = 1,
-+ .wakeup = 1,
-+ },
-+ {
-+ .gpio = AT91_PIN_PA21,
-+ .code = BTN_2,
-+ .desc = "sw2",
-+ .active_low = 1,
-+ .wakeup = 1,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data csb300_button_data = {
-+ .buttons = csb300_buttons,
-+ .nbuttons = ARRAY_SIZE(csb300_buttons),
-+};
-+
-+static struct platform_device csb300_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &csb300_button_data,
-+ }
-+};
-+
-+static void __init csb300_add_device_buttons(void)
-+{
-+ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
-+ at91_set_deglitch(AT91_PIN_PB29, 1);
-+ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
-+ at91_set_deglitch(AT91_PIN_PB28, 1);
-+ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
-+ at91_set_deglitch(AT91_PIN_PA21, 1);
-+
-+ platform_device_register(&csb300_button_device);
-+}
-+#else
-+static void __init csb300_add_device_buttons(void) {}
-+#endif
-+
- static void __init csb337_board_init(void)
- {
- /* Serial */
-@@ -175,8 +257,12 @@
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
- at91_add_device_mmc(0, &csb337_mmc_data);
-+ /* LEDS */
-+ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
- /* NOR flash */
- platform_device_register(&csb_flash);
-+ /* Switches on CSB300 */
-+ csb300_add_device_buttons();
- }
-
- MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c
---- linux-2.6.24/arch/arm/mach-at91/board-dk.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-02-18 23:23:26.000000000 +0200
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/mtd/physmap.h>
-@@ -73,6 +74,185 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x30000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x30200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init dk_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 2 */
-+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0x00},
-+ {S1DREG_GPIO_CNF1, 0x00},
-+ {S1DREG_GPIO_CTL0, 0x08},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+ .initregs = dk_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
-+ .platform_init_video = dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource dk_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &dk_s1dfb_pdata,
-+ },
-+ .resource = dk_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+ platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -164,7 +344,7 @@
- #define DK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data dk_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource dk_flash_resource = {
-@@ -183,6 +363,14 @@
- .num_resources = 1,
- };
-
-+static struct gpio_led dk_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB2,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-
- static void __init dk_board_init(void)
- {
-@@ -213,8 +401,14 @@
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
-+ /* LEDs */
-+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
-+ /* SSC (to LM4549 audio codec) */
-+ at91_add_device_ssc(AT91RM9200_ID_SSC1, ATMEL_SSC_TD | ATMEL_SSC_RX);
-+ /* SSC (to SI3021 line interface) */
-+ at91_add_device_ssc(AT91RM9200_ID_SSC2, ATMEL_SSC_TD | ATMEL_SSC_TK | ATMEL_SSC_RD | ATMEL_SSC_RF);
- /* VGA */
--// dk_add_device_video();
-+ dk_add_device_video();
- }
-
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c
---- linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,183 @@
-+/*
-+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
-+ * Copyright (C) 2007 emQbit.com.
-+ *
-+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata ecb_at91uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 2,
-+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init ecb_at91map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&ecb_at91uart_config);
-+}
-+
-+static void __init ecb_at91init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata ecb_at91eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 0,
-+};
-+
-+static struct at91_usbh_data __initdata ecb_at91usbh_data = {
-+ .ports = 1,
-+};
-+
-+static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-+ .slot_b = 0,
-+ .wire4 = 1,
-+};
-+
-+
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata my_flash0_partitions[] =
-+{
-+ { /* 0x8400 */
-+ .name = "Darrell-loader",
-+ .offset = 0,
-+ .size = 12* 1056,
-+ },
-+ {
-+ .name = "U-boot",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 110 * 1056,
-+ },
-+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-+ .name = "Uoot-env",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 8 * 1056,
-+ },
-+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-+ .name = "Kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1534 * 1056,
-+ },
-+ { /* 190200 - jffs2 root filesystem */
-+ .name = "Filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* 26 sectors */
-+ }
-+};
-+
-+static struct flash_platform_data __initdata my_flash0_platform = {
-+ .name = "Removable flash card",
-+ .parts = my_flash0_partitions,
-+ .nr_parts = ARRAY_SIZE(my_flash0_partitions)
-+};
-+
-+#endif
-+
-+static struct spi_board_info __initdata ecb_at91spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 10 * 1000 * 1000,
-+ .bus_num = 0,
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ .platform_data = &my_flash0_platform,
-+#endif
-+ },
-+ { /* User accessable spi - cs1 (250KHz) */
-+ .modalias = "spi-cs1",
-+ .chip_select = 1,
-+ .max_speed_hz = 250 * 1000,
-+ },
-+ { /* User accessable spi - cs2 (1MHz) */
-+ .modalias = "spi-cs2",
-+ .chip_select = 2,
-+ .max_speed_hz = 1 * 1000 * 1000,
-+ },
-+ { /* User accessable spi - cs3 (10MHz) */
-+ .modalias = "spi-cs3",
-+ .chip_select = 3,
-+ .max_speed_hz = 10 * 1000 * 1000,
-+ },
-+};
-+
-+static void __init ecb_at91board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+
-+ /* Ethernet */
-+ at91_add_device_eth(&ecb_at91eth_data);
-+
-+ /* USB Host */
-+ at91_add_device_usbh(&ecb_at91usbh_data);
-+
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+
-+ /* MMC */
-+ at91_add_device_mmc(0, &ecb_at91mmc_data);
-+
-+ /* SPI */
-+ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-+}
-+
-+MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
-+ /* Maintainer: emQbit.com */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = ecb_at91map_io,
-+ .init_irq = ecb_at91init_irq,
-+ .init_machine = ecb_at91board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c
---- linux-2.6.24/arch/arm/mach-at91/board-ek.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-02-18 22:26:42.000000000 +0200
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/mtd/physmap.h>
-@@ -73,6 +74,187 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x40000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x40200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init ek_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 3 */
-+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
-+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
-+ {S1DREG_GPIO_CTL0, 0x00},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {0x005E, 0x9F},
-+ {0x005F, 0x00},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+ .initregs = ek_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
-+ .platform_init_video = ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-+
-+static struct resource ek_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
-+ .platform_data = &ek_s1dfb_pdata,
-+ },
-+ .resource = ek_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+ platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -122,7 +304,7 @@
- #define EK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data ek_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource ek_flash_resource = {
-@@ -141,6 +323,25 @@
- .num_resources = 1,
- };
-
-+static struct gpio_led ek_leds[] = {
-+ { /* "user led 1", DS2 */
-+ .name = "green",
-+ .gpio = AT91_PIN_PB0,
-+ .active_low = 1,
-+ .default_trigger = "mmc0",
-+ },
-+ { /* "user led 2", DS4 */
-+ .name = "yellow",
-+ .gpio = AT91_PIN_PB1,
-+ .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ },
-+ { /* "user led 3", DS6 */
-+ .name = "red",
-+ .gpio = AT91_PIN_PB2,
-+ .active_low = 1,
-+ }
-+};
-
- static void __init ek_board_init(void)
- {
-@@ -167,8 +368,10 @@
- #endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
--// ek_add_device_video();
-+ ek_add_device_video();
- }
-
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c
---- linux-2.6.24/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,163 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-homematic.c
-+ *
-+ * Copyright (C) 2007 eQ-3 Entwicklung GmbH
-+ *
-+ * based on work
-+ * Copyright (C) 2005 SAN People
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata homematic_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 2,
-+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init homematic_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&homematic_uart_config);
-+}
-+
-+static void __init homematic_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata homematic_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 0,
-+};
-+
-+static struct at91_usbh_data __initdata homematic_usbh_data = {
-+ .ports = 2,
-+};
-+
-+static struct at91_udc_data __initdata homematic_udc_data = {
-+ .vbus_pin = AT91_PIN_PD4,
-+ .pullup_pin = AT91_PIN_PD5,
-+};
-+
-+static struct at91_mmc_data __initdata homematic_mmc_data = {
-+ .slot_b = 0,
-+ .wire4 = 1,
-+};
-+
-+static struct spi_board_info homematic_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+};
-+
-+static struct mtd_partition __initdata homematic_nand_partition[] = {
-+ {
-+ .name = "root",
-+ .offset = 0,
-+ .size = 0x02000000,
-+ }, {
-+ .name = "storage",
-+ .offset = 0x02000000,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(homematic_nand_partition);
-+ return homematic_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata homematic_nand_data = {
-+ .ale = 22,
-+ .cle = 21,
-+// .det_pin = AT91_PIN_PB1,
-+ .rdy_pin = AT91_PIN_PC2,
-+ .enable_pin = AT91_PIN_PC0,
-+ .partition_info = nand_partitions,
-+};
-+
-+static void __init homematic_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* Ethernet */
-+ at91_add_device_eth(&homematic_eth_data);
-+ /* USB Host */
-+ at91_add_device_usbh(&homematic_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&homematic_udc_data);
-+ at91_set_multi_drive(homematic_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+ /* SPI */
-+ at91_add_device_spi(homematic_spi_devices, ARRAY_SIZE(homematic_spi_devices));
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card */
-+ at91_set_gpio_output(AT91_PIN_PB7, 0);
-+#else
-+ /* MMC */
-+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-+ at91_add_device_mmc(0, &homematic_mmc_data);
-+#endif
-+ /* NAND */
-+ at91_add_device_nand(&homematic_nand_data);
-+}
-+
-+MACHINE_START(HOMEMATIC, "HomeMatic")
-+ /* Maintainer: eQ-3 */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = homematic_map_io,
-+ .init_irq = homematic_init_irq,
-+ .init_machine = homematic_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.24/arch/arm/mach-at91/board-kb9202.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-02-18 23:21:36.000000000 +0200
-@@ -37,6 +37,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-
-+#include <asm/arch/at91rm9200_mc.h>
-+
- #include "generic.h"
-
-
-@@ -111,6 +113,48 @@
- .partition_info = nand_partitions,
- };
-
-+
-+#if defined(CONFIG_FB_S1D15605)
-+#warning "The Reset pin must be passed via platform_data, not this way"
-+static struct resource kb9202_lcd_resources[] = {
-+ [0] = {
-+ .start = AT91_CHIPSELECT_2,
-+ .end = AT91_CHIPSELECT_2 + 0x200FF,
-+ .flags = IORESOURCE_MEM
-+ },
-+ [1] = { /* reset pin */
-+ .start = AT91_PIN_PC22,
-+ .end = AT91_PIN_PC22,
-+ .flags = IORESOURCE_MEM
-+ },
-+};
-+
-+static struct platform_device kb9202_lcd_device = {
-+ .name = "s1d15605fb",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
-+ .resource = kb9202_lcd_resources,
-+};
-+
-+static void __init kb9202_add_device_lcd(void)
-+{
-+ /* In case the boot loader did not set the chip select mode and timing */
-+ at91_sys_write(AT91_SMC_CSR(2),
-+ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
-+ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
-+
-+ /* Backlight pin = output, off */
-+ at91_set_gpio_output(AT91_PIN_PC23, 0);
-+
-+ /* Reset pin = output, in reset */
-+ at91_set_gpio_output(AT91_PIN_PC22, 0);
-+
-+ platform_device_register(&kb9202_lcd_device);
-+}
-+#else
-+static void __init kb9202_add_device_lcd(void) {}
-+#endif
-+
- static void __init kb9202_board_init(void)
- {
- /* Serial */
-@@ -129,6 +173,8 @@
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
-+ /* LCD */
-+ kb9202_add_device_lcd();
- }
-
- MACHINE_START(KB9200, "KB920x")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c
---- linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-03-01 20:39:38.000000000 +0200
-@@ -0,0 +1,199 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ * Copyright (C) 2007 Olimex Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 5 = USART0 .. USART5
-+ * 6 = DBGU
-+ */
-+static struct at91_uart_config __initdata ek_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 3,
-+ .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
-+};
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91sam9260_initialize(18432000);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&ek_uart_config);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+ .ports = 2,
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+ .vbus_pin = AT91_PIN_PC5,
-+ .pullup_pin = 0, /* pull-up driven by UDC */
-+};
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if !defined(CONFIG_MMC_AT91)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 1,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-+ { /* DataFlash card */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+#endif
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PA7,
-+ .is_rmii = 0,
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Bootloader Area",
-+ .offset = 0,
-+ .size = 10 * 1024 * 1024,
-+ },
-+ {
-+ .name = "User Area",
-+ .offset = 10 * 1024 * 1024,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PC13,
-+ .enable_pin = AT91_PIN_PC14,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+ .slot_b = 1,
-+ .wire4 = 1,
-+ .det_pin = AT91_PIN_PC8,
-+ .wp_pin = AT91_PIN_PC4,
-+// .vcc_pin = ... not connected
-+};
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ at91_add_device_usbh(&ek_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&ek_udc_data);
-+ /* SPI */
-+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* Ethernet */
-+ at91_add_device_eth(&ek_macb_data);
-+ /* MMC */
-+ at91_add_device_mmc(0, &ek_mmc_data);
-+ /* I2C */
-+ at91_add_device_i2c(NULL, 0);
-+}
-+
-+MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
-+ /* Maintainer: Olimex */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 20:40:19.000000000 +0200
-@@ -25,6 +25,8 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/clk.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -37,29 +39,29 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 5 = USART0 .. USART5
-- * 6 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 3,
-- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-+ | ATMEL_UART_RI);
-+
-+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -85,6 +87,36 @@
-
-
- /*
-+ * Audio
-+ */
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 0,
-+ .shortname = "AT91SAM9260-EK external DAC",
-+};
-+
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+ struct clk *pck0;
-+ struct clk *plla;
-+
-+ pck0 = clk_get(NULL, "pck0");
-+ plla = clk_get(NULL, "plla");
-+
-+ /* AT73C213 MCK Clock */
-+ at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
-+
-+ clk_set_parent(pck0, plla);
-+ clk_set_rate(pck0, 12416000);
-+ clk_enable(pck0);
-+
-+ info->dac_clk = pck0;
-+}
-+#else
-+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-+#endif
-+
-+/*
- * SPI devices.
- */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -110,6 +142,8 @@
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
- },
- #endif
- };
-@@ -172,6 +206,24 @@
- // .vcc_pin = ... not connected
- };
-
-+
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* "bottom" led, green, userled1 to be defined */
-+ .name = "ds5",
-+ .gpio = AT91_PIN_PA6,
-+ .active_low = 1,
-+ .default_trigger = "none",
-+ },
-+ { /* "power" led, yellow */
-+ .name = "ds1",
-+ .gpio = AT91_PIN_PA9,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -190,6 +242,14 @@
- at91_add_device_mmc(0, &ek_mmc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
-+ /* SSC (to AT73C213) */
-+ at73c213_set_clk(&at73c213_data);
-+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-03-04 21:05:58.000000000 +0200
-@@ -26,6 +26,8 @@
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/ads7846.h>
-+#include <linux/spi/at73c213.h>
-+#include <linux/clk.h>
- #include <linux/dm9000.h>
- #include <linux/fb.h>
- #include <linux/gpio_keys.h>
-@@ -44,22 +46,12 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam926x_smc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 2 = USART0 .. USART2
-- * 3 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 1,
-- .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 18.432 MHz crystal */
-@@ -68,8 +60,11 @@
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -239,6 +234,36 @@
- #endif
-
- /*
-+ * Audio
-+ */
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 1,
-+ .shortname = "AT91SAM9261-EK external DAC",
-+};
-+
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+ struct clk *pck2;
-+ struct clk *plla;
-+
-+ pck2 = clk_get(NULL, "pck2");
-+ plla = clk_get(NULL, "plla");
-+
-+ /* AT73C213 MCK Clock */
-+ at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */
-+
-+ clk_set_parent(pck2, plla);
-+ clk_set_rate(pck2, 12416000);
-+ clk_enable(pck2);
-+
-+ info->dac_clk = pck2;
-+}
-+#else
-+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-+#endif
-+
-+/*
- * SPI devices
- */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -256,6 +281,7 @@
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91SAM9261_ID_IRQ0,
-+ .controller_data = (void *) AT91_PIN_PA28, /* CS pin */
- },
- #endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-@@ -271,6 +297,9 @@
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
-+ .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */
- },
- #endif
- };
-@@ -280,6 +309,68 @@
- * LCD Controller
- */
- #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+
-+#if defined(CONFIG_FB_ATMEL_STN)
-+
-+/* STN */
-+static struct fb_videomode at91_stn_modes[] = {
-+ {
-+ .name = "SP06Q002 @ 75",
-+ .refresh = 75,
-+ .xres = 320, .yres = 240,
-+ .pixclock = KHZ2PICOS(1440),
-+
-+ .left_margin = 1, .right_margin = 1,
-+ .upper_margin = 0, .lower_margin = 0,
-+ .hsync_len = 1, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_stn_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "SP06Q002",
-+
-+ .modedb = at91_stn_modes,
-+ .modedb_len = ARRAY_SIZE(at91_stn_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_STNMONO \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
-+ | ATMEL_LCDC_IFWIDTH_4 \
-+ | ATMEL_LCDC_SCANMOD_SINGLE)
-+
-+static void at91_lcdc_stn_power_control(int on)
-+{
-+ /* backlight */
-+ if (on) { /* power up */
-+ at91_set_gpio_value(AT91_PIN_PC14, 0);
-+ at91_set_gpio_value(AT91_PIN_PC15, 0);
-+ } else { /* power down */
-+ at91_set_gpio_value(AT91_PIN_PC14, 1);
-+ at91_set_gpio_value(AT91_PIN_PC15, 1);
-+ }
-+}
-+
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 1,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
-+ .default_monspecs = &at91fb_default_stn_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+
-+/* TFT */
- static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
-@@ -296,7 +387,7 @@
- },
- };
-
--static struct fb_monspecs at91fb_default_monspecs = {
-+static struct fb_monspecs at91fb_default_tft_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D50VM1CCA",
-
-@@ -308,11 +399,11 @@
- .vfmax = 150,
- };
-
--#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
--static void at91_lcdc_power_control(int on)
-+static void at91_lcdc_tft_power_control(int on)
- {
- if (on)
- at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
-@@ -320,15 +411,16 @@
- at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
- }
-
--/* Driver datas */
- static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
-- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
-- .default_monspecs = &at91fb_default_monspecs,
-- .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
-+ .default_monspecs = &at91fb_default_tft_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
- .guard_time = 1,
- };
-+#endif
-
- #else
- static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-@@ -342,25 +434,25 @@
- static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PA27,
-- .keycode = BTN_0,
-+ .code = BTN_0,
- .desc = "Button 0",
- .active_low = 1,
- },
- {
- .gpio = AT91_PIN_PA26,
-- .keycode = BTN_1,
-+ .code = BTN_1,
- .desc = "Button 1",
- .active_low = 1,
- },
- {
- .gpio = AT91_PIN_PA25,
-- .keycode = BTN_2,
-+ .code = BTN_2,
- .desc = "Button 2",
- .active_low = 1,
- },
- {
- .gpio = AT91_PIN_PA24,
-- .keycode = BTN_3,
-+ .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
- }
-@@ -397,6 +489,29 @@
- static void __init ek_add_device_buttons(void) {}
- #endif
-
-+/*
-+ * LEDs
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* "bottom" led, green, userled1 to be defined */
-+ .name = "ds7",
-+ .gpio = AT91_PIN_PA14,
-+ .active_low = 1,
-+ .default_trigger = "none",
-+ },
-+ { /* "top" led, green, userled2 to be defined */
-+ .name = "ds8",
-+ .gpio = AT91_PIN_PA13,
-+ .active_low = 1,
-+ .default_trigger = "none",
-+ },
-+ { /* "power" led, yellow */
-+ .name = "ds1",
-+ .gpio = AT91_PIN_PA23,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -418,6 +533,9 @@
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Touchscreen */
- ek_add_device_ts();
-+ /* SSC (to AT73C213) */
-+ at73c213_set_clk(&at73c213_data);
-+ at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
- #else
- /* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
-@@ -426,6 +544,11 @@
- at91_add_device_lcdc(&ek_lcdc_data);
- /* Push Buttons */
- ek_add_device_buttons();
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 20:41:13.000000000 +0200
-@@ -27,6 +27,8 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/ads7846.h>
- #include <linux/fb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-
- #include <video/atmel_lcdc.h>
-
-@@ -41,29 +43,24 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 2 = USART0 .. USART2
-- * 3 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 16.367 MHz crystal */
- at91sam9263_initialize(16367660);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -163,6 +160,7 @@
- * MACB Ethernet device
- */
- static struct at91_eth_data __initdata ek_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
- };
-
-@@ -242,14 +240,12 @@
-
- static void at91_lcdc_power_control(int on)
- {
-- if (on)
-- at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
-- else
-- at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
-+ at91_set_gpio_value(AT91_PIN_PA30, on);
- }
-
- /* Driver datas */
- static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
-@@ -264,6 +260,55 @@
-
-
- /*
-+ * GPIO Buttons
-+ */
-+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-+static struct gpio_keys_button ek_buttons[] = {
-+ { /* BP1, "leftclic" */
-+ .code = BTN_LEFT,
-+ .gpio = AT91_PIN_PC5,
-+ .active_low = 1,
-+ .desc = "left_click",
-+ .wakeup = 1,
-+ },
-+ { /* BP2, "rightclic" */
-+ .code = BTN_RIGHT,
-+ .gpio = AT91_PIN_PC4,
-+ .active_low = 1,
-+ .desc = "right_click",
-+ .wakeup = 1,
-+ },
-+};
-+
-+static struct gpio_keys_platform_data ek_button_data = {
-+ .buttons = ek_buttons,
-+ .nbuttons = ARRAY_SIZE(ek_buttons),
-+};
-+
-+static struct platform_device ek_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &ek_button_data,
-+ }
-+};
-+
-+static void __init ek_add_device_buttons(void)
-+{
-+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
-+ at91_set_deglitch(AT91_PIN_PC5, 1);
-+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
-+ at91_set_deglitch(AT91_PIN_PC4, 1);
-+
-+ platform_device_register(&ek_button_device);
-+}
-+#else
-+static void __init ek_add_device_buttons(void) {}
-+#endif
-+
-+
-+/*
- * AC97
- */
- static struct atmel_ac97_data ek_ac97_data = {
-@@ -271,6 +316,30 @@
- };
-
-
-+/*
-+ * LEDs ... these could all be PWM-driven, for variable brightness
-+ */
-+static struct gpio_led ek_leds[] = {
-+ { /* "left" led, green, userled1, pwm1 */
-+ .name = "ds1",
-+ .gpio = AT91_PIN_PB8,
-+ .active_low = 1,
-+ .default_trigger = "mmc0",
-+ },
-+ { /* "right" led, green, userled2, pwm2 */
-+ .name = "ds2",
-+ .gpio = AT91_PIN_PC29,
-+ .active_low = 1,
-+ .default_trigger = "nand-disk",
-+ },
-+ { /* "power" led, yellow, pwm0 */
-+ .name = "ds3",
-+ .gpio = AT91_PIN_PB7,
-+ .default_trigger = "heartbeat",
-+ }
-+};
-+
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -294,8 +363,15 @@
- at91_add_device_i2c(NULL, 0);
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
-+ /* Push Buttons */
-+ ek_add_device_buttons();
- /* AC97 */
- at91_add_device_ac97(&ek_ac97_data);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 20:39:17.000000000 +0200
-@@ -29,29 +29,24 @@
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91_shdwc.h>
-
- #include "generic.h"
-
-
--/*
-- * Serial port configuration.
-- * 0 .. 3 = USART0 .. USART3
-- * 4 = DBGU
-- */
--static struct at91_uart_config __initdata ek_uart_config = {
-- .console_tty = 0, /* ttyS0 */
-- .nr_tty = 2,
-- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
--};
--
- static void __init ek_map_io(void)
- {
- /* Initialize processor: 12.000 MHz crystal */
- at91sam9rl_initialize(12000000);
-
-- /* Setup the serial ports and console */
-- at91_init_serial(&ek_uart_config);
-+ /* DGBU on ttyS0. (Rx & Tx only) */
-+ at91_register_uart(0, 0, 0);
-+
-+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+
-+ /* set serial console to ttyS0 (ie, DBGU) */
-+ at91_set_serial_console(0);
- }
-
- static void __init ek_init_irq(void)
-@@ -190,6 +185,9 @@
- at91_add_device_mmc(0, &ek_mmc_data);
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
-+ /* shutdown controller, wakeup button (5 msec low) */
-+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-+ | AT91_SHDW_RTTWKEN);
- }
-
- MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c
---- linux-2.6.24/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-tms.c 2007-12-31 15:18:42.000000000 +0200
-@@ -0,0 +1,198 @@
-+/*
-+* linux/arch/arm/mach-at91/board-tms.c
-+*
-+* Copyright (C) 2005 SAN People
-+*
-+* Adapted from board-dk to sweda TMS-100 by Luiz de Barros <lboneto@gmail.com>
-+*
-+* This program is free software; you can redistribute it and/or modify
-+* it under the terms of the GNU General Public License as published by
-+* the Free Software Foundation; either version 2 of the License, or
-+* (at your option) any later version.
-+*
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+* GNU General Public License for more details.
-+*
-+* You should have received a copy of the GNU General Public License
-+* along with this program; if not, write to the Free Software
-+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+*/
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+#include <linux/serial_8250.h>
-+
-+
-+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP| UPF_SHARE_IRQ)
-+#define SERIAL_CLK (1843200)
-+
-+
-+/*---------------------------------------------------------------------
-+ * External UART
-+ */
-+
-+#define PORT(_base, _irq) \
-+ { \
-+ .mapbase = _base, \
-+ .irq = _irq, \
-+ .uartclk = SERIAL_CLK, \
-+ .iotype = UPIO_MEM, \
-+ .regshift = 0, \
-+ .flags = SERIAL_FLAGS, \
-+ }
-+
-+static struct plat_serial8250_port tms_data[] = {
-+ PORT(0x70000000, AT91_PIN_PC3),
-+ PORT(0x80000000, AT91_PIN_PC5),
-+ { },
-+};
-+
-+static struct platform_device tms_device = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev =
-+ {
-+ .platform_data = &tms_data,
-+ },
-+};
-+
-+static void setup_external_uart(void)
-+{
-+ at91_sys_write(AT91_SMC_CSR(2),
-+ AT91_SMC_ACSS_STD
-+ | AT91_SMC_DBW_8
-+ | AT91_SMC_BAT
-+ | AT91_SMC_WSEN
-+ | AT91_SMC_NWS_(32) /* wait states */
-+ | AT91_SMC_RWSETUP_(6) /* setup time */
-+ | AT91_SMC_RWHOLD_(4) /* hold time */
-+
-+ );
-+ at91_sys_write(AT91_SMC_CSR(6),
-+ AT91_SMC_ACSS_STD
-+ | AT91_SMC_DBW_8
-+ | AT91_SMC_BAT
-+ | AT91_SMC_WSEN
-+ | AT91_SMC_NWS_(32) /* wait states */
-+ | AT91_SMC_RWSETUP_(6) /* setup time */
-+ | AT91_SMC_RWHOLD_(4) /* hold time */
-+
-+ );
-+ at91_sys_write(AT91_SMC_CSR(7),
-+ AT91_SMC_ACSS_STD
-+ | AT91_SMC_DBW_8
-+ | AT91_SMC_BAT
-+ | AT91_SMC_WSEN
-+ | AT91_SMC_NWS_(32) /* wait states */
-+ | AT91_SMC_RWSETUP_(6) /* setup time */
-+ | AT91_SMC_RWHOLD_(4) /* hold time */
-+ );
-+
-+ platform_device_register(&tms_device);
-+}
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata tms_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 5,
-+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init tms_map_io(void)
-+{
-+ /* Initialize processor: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
-+
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&tms_uart_config);
-+}
-+
-+static void __init tms_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+
-+static struct at91_eth_data __initdata tms_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PC4,
-+ .is_rmii = 1,
-+};
-+
-+static struct at91_usbh_data __initdata tms_usbh_data = {
-+ .ports = 2,
-+};
-+
-+static struct spi_board_info tms_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 1,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ }
-+};
-+
-+static struct i2c_board_info __initdata tms_i2c_devices[] = {
-+ {
-+ I2C_BOARD_INFO("isl1208", 0x6f),
-+ }
-+};
-+
-+static void __init tms_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* Ethernet */
-+ at91_add_device_eth(&tms_eth_data);
-+ at91_add_device_usbh(&tms_usbh_data);
-+ /* I2C */
-+ at91_add_device_i2c(tms_i2c_devices, ARRAY_SIZE(tms_i2c_devices));
-+ /* SPI */
-+ at91_add_device_spi(tms_spi_devices, ARRAY_SIZE(tms_spi_devices));
-+ /* Two port external UART */
-+ setup_external_uart();
-+}
-+
-+MACHINE_START(SWEDATMS, "Sweda TMS-100 Board")
-+ /* Maintainer: Luiz de Barros */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = tms_map_io,
-+ .init_irq = tms_init_irq,
-+ .init_machine = tms_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c
---- linux-2.6.24/arch/arm/mach-at91/clock.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/clock.c 2008-02-18 18:34:06.000000000 +0200
-@@ -32,6 +32,7 @@
- #include <asm/arch/cpu.h>
-
- #include "clock.h"
-+#include "generic.h"
-
-
- /*
-@@ -254,6 +255,23 @@
-
- /*------------------------------------------------------------------------*/
-
-+#ifdef CONFIG_PM
-+
-+int clk_must_disable(struct clk *clk)
-+{
-+ if (!at91_suspend_entering_slow_clock())
-+ return 0;
-+
-+ while (clk->parent)
-+ clk = clk->parent;
-+ return clk != &clk32k;
-+}
-+EXPORT_SYMBOL(clk_must_disable);
-+
-+#endif
-+
-+/*------------------------------------------------------------------------*/
-+
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
- /*
-@@ -343,7 +361,7 @@
- EXPORT_SYMBOL(clk_set_parent);
-
- /* establish PCK0..PCK3 parentage and rate */
--static void init_programmable_clock(struct clk *clk)
-+static void __init init_programmable_clock(struct clk *clk)
- {
- struct clk *parent;
- u32 pckr;
-@@ -574,6 +592,8 @@
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-+ } else if (cpu_is_at91cap9()) {
-+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
- }
- at91_sys_write(AT91_CKGR_PLLBR, 0);
-
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h
---- linux-2.6.24/arch/arm/mach-at91/generic.h 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/generic.h 2008-02-18 23:29:29.000000000 +0200
-@@ -15,6 +15,7 @@
- extern void __init at91sam9263_initialize(unsigned long main_clock);
- extern void __init at91sam9rl_initialize(unsigned long main_clock);
- extern void __init at91x40_initialize(unsigned long main_clock);
-+extern void __init at91cap9_initialize(unsigned long main_clock);
-
- /* Interrupts */
- extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
-@@ -23,6 +24,7 @@
- extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
- extern void __init at91x40_init_interrupts(unsigned int priority[]);
-+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
- extern void __init at91_aic_init(unsigned int priority[]);
-
- /* Timer */
-@@ -39,12 +41,16 @@
- /* Power Management */
- extern void at91_irq_suspend(void);
- extern void at91_irq_resume(void);
-+extern int at91_suspend_entering_slow_clock(void);
-
- /* GPIO */
- #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
- #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
-
- struct at91_gpio_bank {
-+ unsigned chipbase; /* bank's first GPIO number */
-+ void __iomem *regbase; /* base of register bank */
-+ struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
- unsigned short id; /* peripheral ID */
- unsigned long offset; /* offset from system peripheral base */
- struct clk *clock; /* associated clock */
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c
---- linux-2.6.24/arch/arm/mach-at91/gpio.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-03-01 18:01:29.000000000 +0200
-@@ -13,6 +13,8 @@
- #include <linux/errno.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
- #include <linux/kernel.h>
- #include <linux/list.h>
- #include <linux/module.h>
-@@ -31,12 +33,10 @@
-
- static inline void __iomem *pin_to_controller(unsigned pin)
- {
-- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
--
- pin -= PIN_BASE;
- pin /= 32;
- if (likely(pin < gpio_banks))
-- return sys_base + gpio[pin].offset;
-+ return gpio[pin].regbase;
-
- return NULL;
- }
-@@ -292,11 +292,11 @@
- int i;
-
- for (i = 0; i < gpio_banks; i++) {
-- u32 pio = gpio[i].offset;
-+ void __iomem *pio = gpio[i].regbase;
-
-- backups[i] = at91_sys_read(pio + PIO_IMR);
-- at91_sys_write(pio + PIO_IDR, backups[i]);
-- at91_sys_write(pio + PIO_IER, wakeups[i]);
-+ backups[i] = __raw_readl(pio + PIO_IMR);
-+ __raw_writel(backups[i], pio + PIO_IDR);
-+ __raw_writel(wakeups[i], pio + PIO_IER);
-
- if (!wakeups[i])
- clk_disable(gpio[i].clock);
-@@ -313,13 +313,13 @@
- int i;
-
- for (i = 0; i < gpio_banks; i++) {
-- u32 pio = gpio[i].offset;
-+ void __iomem *pio = gpio[i].regbase;
-
- if (!wakeups[i])
- clk_enable(gpio[i].clock);
-
-- at91_sys_write(pio + PIO_IDR, wakeups[i]);
-- at91_sys_write(pio + PIO_IER, backups[i]);
-+ __raw_writel(wakeups[i], pio + PIO_IDR);
-+ __raw_writel(backups[i], pio + PIO_IER);
- }
- }
-
-@@ -359,7 +359,13 @@
-
- static int gpio_irq_type(unsigned pin, unsigned type)
- {
-- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
-+ switch (type) {
-+ case IRQ_TYPE_NONE:
-+ case IRQ_TYPE_EDGE_BOTH:
-+ return 0;
-+ default:
-+ return -EINVAL;
-+ }
- }
-
- static struct irq_chip gpio_irqchip = {
-@@ -374,20 +380,30 @@
- {
- unsigned pin;
- struct irq_desc *gpio;
-+ struct at91_gpio_bank *bank;
- void __iomem *pio;
- u32 isr;
-
-- pio = get_irq_chip_data(irq);
-+ bank = get_irq_chip_data(irq);
-+ pio = bank->regbase;
-
- /* temporarily mask (level sensitive) parent IRQ */
- desc->chip->ack(irq);
- for (;;) {
-- /* reading ISR acks the pending (edge triggered) GPIO interrupt */
-+ /* Reading ISR acks pending (edge triggered) GPIO interrupts.
-+ * When there none are pending, we're finished unless we need
-+ * to process multiple banks (like ID_PIOCDE on sam9263).
-+ */
- isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
-- if (!isr)
-- break;
-+ if (!isr) {
-+ if (!bank->next)
-+ break;
-+ bank = bank->next;
-+ pio = bank->regbase;
-+ continue;
-+ }
-
-- pin = (unsigned) get_irq_data(irq);
-+ pin = bank->chipbase;
- gpio = &irq_desc[pin];
-
- while (isr) {
-@@ -414,29 +430,94 @@
-
- /*--------------------------------------------------------------------------*/
-
-+#ifdef CONFIG_DEBUG_FS
-+
-+static int at91_gpio_show(struct seq_file *s, void *unused)
-+{
-+ int bank, j;
-+
-+ /* print heading */
-+ seq_printf(s, "Pin\t");
-+ for (bank = 0; bank < gpio_banks; bank++) {
-+ seq_printf(s, "PIO%c\t", 'A' + bank);
-+ };
-+ seq_printf(s, "\n\n");
-+
-+ /* print pin status */
-+ for (j = 0; j < 32; j++) {
-+ seq_printf(s, "%i:\t", j);
-+
-+ for (bank = 0; bank < gpio_banks; bank++) {
-+ unsigned pin = PIN_BASE + (32 * bank) + j;
-+ void __iomem *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ if (__raw_readl(pio + PIO_PSR) & mask)
-+ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
-+ else
-+ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
-+
-+ seq_printf(s, "\t");
-+ }
-+
-+ seq_printf(s, "\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static int at91_gpio_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, at91_gpio_show, NULL);
-+}
-+
-+static const struct file_operations at91_gpio_operations = {
-+ .open = at91_gpio_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static int __init at91_gpio_debugfs_init(void)
-+{
-+ /* /sys/kernel/debug/at91_gpio */
-+ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
-+ return 0;
-+}
-+postcore_initcall(at91_gpio_debugfs_init);
-+
-+#endif
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/*
-+ * This lock class tells lockdep that GPIO irqs are in a different
-+ * category than their parents, so it won't report false recursion.
-+ */
-+static struct lock_class_key gpio_lock_class;
-+
- /*
- * Called from the processor-specific init to enable GPIO interrupt support.
- */
- void __init at91_gpio_irq_setup(void)
- {
-- unsigned pioc, pin;
-+ unsigned pioc, pin;
-+ struct at91_gpio_bank *this, *prev;
-
-- for (pioc = 0, pin = PIN_BASE;
-- pioc < gpio_banks;
-- pioc++) {
-- void __iomem *controller;
-- unsigned id = gpio[pioc].id;
-+ for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
-+ pioc++ < gpio_banks;
-+ prev = this, this++) {
-+ unsigned id = this->id;
- unsigned i;
-
-- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
-+ /* enable PIO controller's clock */
-+ clk_enable(this->clock);
-
-- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
-- __raw_writel(~0, controller + PIO_IDR);
-+ __raw_writel(~0, this->regbase + PIO_IDR);
-
-- set_irq_data(id, (void *) pin);
-- set_irq_chip_data(id, controller);
-+ for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
-+ lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
-
-- for (i = 0; i < 32; i++, pin++) {
- /*
- * Can use the "simple" and not "edge" handler since it's
- * shorter, and the AIC handles interrupts sanely.
-@@ -446,6 +527,14 @@
- set_irq_flags(pin, IRQF_VALID);
- }
-
-+ /* The toplevel handler handles one bank of GPIOs, except
-+ * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
-+ * the list, so we only set up that handler.
-+ */
-+ if (prev && prev->next == this)
-+ continue;
-+
-+ set_irq_chip_data(id, this);
- set_irq_chained_handler(id, gpio_irq_handler);
- }
- pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
-@@ -456,8 +545,21 @@
- */
- void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
- {
-+ unsigned i;
-+ struct at91_gpio_bank *last;
-+
- BUG_ON(nr_banks > MAX_GPIO_BANKS);
-
- gpio = data;
- gpio_banks = nr_banks;
-+
-+ for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
-+ data->chipbase = PIN_BASE + i * 32;
-+ data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
-+
-+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
-+ /* AT91CAP9_ID_PIOABCD groups PIOA, PIOB, PIOC, PIOD */
-+ if (last && last->id == data->id)
-+ last->next = data;
-+ }
- }
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c
---- linux-2.6.24/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-03-01 22:05:07.000000000 +0200
-@@ -0,0 +1,208 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ * Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+ int sclock;
-+
-+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+ if (sclock % 10 >= 5)
-+ sclock = (sclock /10) - 5;
-+ else
-+ sclock = (sclock /10)- 6;
-+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
-+
-+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ /* Wait TXcomplete ... */
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ }
-+
-+ if (Status & AT91_TWI_TXCOMP) {
-+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+ return ICS1523_ACCESS_OK;
-+ }
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_THR, data_out);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ if (Status & AT91_TWI_ERROR) {
-+ /* If Underrun OR NACK - Start again */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+ }
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ };
-+
-+ if (Status & AT91_TWI_TXCOMP)
-+ return ICS1523_ACCESS_OK;
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+ int nb_trial;
-+ int ack = ICS1523_ACCESS_OK;
-+ unsigned int status = 0xffffffff;
-+ struct clk *twi_clk;
-+
-+ /* Map in TWI peripheral */
-+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+ if (!twi_base)
-+ return -ENOMEM;
-+
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PA25, 1);
-+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+ /* Enable the TWI clock */
-+ twi_clk = clk_get(NULL, "twi_clk");
-+ if (IS_ERR(twi_clk))
-+ return ICS1523_ACCESS_ERROR;
-+ clk_enable(twi_clk);
-+
-+ /* Disable interrupts */
-+ at91_twi_write(AT91_TWI_IDR, -1);
-+
-+ /* Reset peripheral */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+ /* Set Master mode */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+ /* Set TWI Clock Waveform Generator Register */
-+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
-+
-+ /* ICS1523 Initialisation */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+ nb_trial = 0;
-+ do {
-+ nb_trial++;
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ /* All done - cleanup */
-+ iounmap(twi_base);
-+ clk_disable(twi_clk);
-+ clk_put(twi_clk);
-+
-+ return ack;
-+}
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/leds.c linux-2.6/arch/arm/mach-at91/leds.c
---- linux-2.6.24/arch/arm/mach-at91/leds.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/leds.c 2008-02-18 22:20:11.000000000 +0200
-@@ -14,11 +14,63 @@
- #include <linux/init.h>
-
- #include <asm/mach-types.h>
--#include <asm/leds.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-
-
-+/* ------------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_NEW_LEDS)
-+
-+#include <linux/platform_device.h>
-+
-+/*
-+ * New cross-platform LED support.
-+ */
-+
-+static struct gpio_led_platform_data led_data;
-+
-+static struct platform_device at91_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &led_data,
-+};
-+
-+void __init at91_gpio_leds(struct gpio_led *leds, int nr)
-+{
-+ int i;
-+
-+ if (!nr)
-+ return;
-+
-+ for (i = 0; i < nr; i++)
-+ at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
-+
-+ led_data.leds = leds;
-+ led_data.num_leds = nr;
-+ platform_device_register(&at91_leds);
-+}
-+
-+#else
-+void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
-+#endif
-+
-+
-+/* ------------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+
-+#include <asm/leds.h>
-+
-+/*
-+ * Old ARM-specific LED framework; not fully functional when generic time is
-+ * in use.
-+ */
-+
-+static u8 at91_leds_cpu;
-+static u8 at91_leds_timer;
-+
-+
- static inline void at91_led_on(unsigned int led)
- {
- at91_set_gpio_value(led, 0);
-@@ -93,3 +145,18 @@
- }
-
- __initcall(leds_init);
-+
-+
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
-+ at91_leds_cpu = cpu_led;
-+ at91_leds_timer = timer_led;
-+}
-+
-+#else
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c
---- linux-2.6.24/arch/arm/mach-at91/pm.c 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/pm.c 2008-03-01 22:05:23.000000000 +0200
-@@ -26,12 +26,140 @@
- #include <asm/mach-types.h>
-
- #include <asm/arch/at91_pmc.h>
--#include <asm/arch/at91rm9200_mc.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/cpu.h>
-
- #include "generic.h"
-
-+#ifdef CONFIG_ARCH_AT91RM9200
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+/*
-+ * The AT91RM9200 goes into self-refresh mode with this command, and will
-+ * terminate self-refresh automatically on the next SDRAM access.
-+ */
-+#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
-+#define sdram_selfrefresh_disable() do {} while (0)
-+
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9_ddrsdr.h>
-+
-+static u32 saved_lpr;
-+
-+static inline void sdram_selfrefresh_enable(void)
-+{
-+ u32 lpr;
-+
-+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-+
-+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-+}
-+
-+#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-+
-+#else
-+#include <asm/arch/at91sam926x_sdramc.h>
-+
-+static u32 saved_lpr;
-+
-+static inline void sdram_selfrefresh_enable(void)
-+{
-+ u32 lpr;
-+
-+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-+
-+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-+}
-+
-+#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-+
-+/*
-+ * FIXME: The AT91SAM9263 has a second EBI controller which may have
-+ * additional SDRAM. pm_slowclock.S will require a similar fix.
-+ */
-+
-+#endif
-+
-+
-+#if defined(AT91_SHDWC)
-+
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_shdwc.h>
-+
-+/*
-+ * Show the reason for the previous system reset.
-+ */
-+static void __init show_reset_status(void)
-+{
-+ static char reset[] __initdata = "reset";
-+
-+ static char general[] __initdata = "general";
-+ static char wakeup[] __initdata = "wakeup";
-+ static char watchdog[] __initdata = "watchdog";
-+ static char software[] __initdata = "software";
-+ static char user[] __initdata = "user";
-+ static char unknown[] __initdata = "unknown";
-+
-+ static char signal[] __initdata = "signal";
-+ static char rtc[] __initdata = "rtc";
-+ static char rtt[] __initdata = "rtt";
-+ static char restore[] __initdata = "power-restored";
-+
-+ char *reason, *r2 = reset;
-+ u32 reset_type, wake_type;
-+
-+ reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-+ wake_type = at91_sys_read(AT91_SHDW_SR);
-+
-+ switch (reset_type) {
-+ case AT91_RSTC_RSTTYP_GENERAL:
-+ reason = general;
-+ break;
-+ case AT91_RSTC_RSTTYP_WAKEUP:
-+ /* board-specific code enabled the wakeup sources */
-+ reason = wakeup;
-+
-+ /* "wakeup signal" */
-+ if (wake_type & AT91_SHDW_WAKEUP0)
-+ r2 = signal;
-+ else {
-+ r2 = reason;
-+ if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */
-+ reason = rtt;
-+ else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */
-+ reason = rtc;
-+ else if (wake_type == 0) /* power-restored wakeup */
-+ reason = restore;
-+ else /* unknown wakeup */
-+ reason = unknown;
-+ }
-+ break;
-+ case AT91_RSTC_RSTTYP_WATCHDOG:
-+ reason = watchdog;
-+ break;
-+ case AT91_RSTC_RSTTYP_SOFTWARE:
-+ reason = software;
-+ break;
-+ case AT91_RSTC_RSTTYP_USER:
-+ reason = user;
-+ break;
-+ default:
-+ reason = unknown;
-+ break;
-+ }
-+ pr_info("AT91: Starting after %s %s\n", reason, r2);
-+}
-+#else
-+static void __init show_reset_status(void) {}
-+#endif
-+
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91_slow_clock(void);
-+extern u32 at91_slow_clock_sz;
-+#endif
-+
-
- static int at91_pm_valid_state(suspend_state_t state)
- {
-@@ -62,6 +190,7 @@
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-+#warning "This should probably be moved to clocks.c"
- static int at91_pm_verify_clocks(void)
- {
- unsigned long scsr;
-@@ -80,6 +209,11 @@
- pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
- return 0;
- }
-+ } else if (cpu_is_at91cap9()) {
-+ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
-+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
-+ return 0;
-+ }
- }
-
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-@@ -102,20 +236,15 @@
- }
-
- /*
-- * Call this from platform driver suspend() to see how deeply to suspend.
-+ * This is called from clk_must_disable(), to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
-- *
-- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
-- * the very same problem (but not using at91 main_clk), and it'd be better
-- * to add one generic API rather than lots of platform-specific ones.
- */
- int at91_suspend_entering_slow_clock(void)
- {
- return (target_state == PM_SUSPEND_MEM);
- }
--EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
- static void (*slow_clock)(void);
-@@ -153,11 +282,12 @@
- * turning off the main oscillator; reverse on wakeup.
- */
- if (slow_clock) {
-+ /* copy slow_clock handler to SRAM, and call it */
-+ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
- slow_clock();
- break;
- } else {
-- /* DEVELOPMENT ONLY */
-- pr_info("AT91: PM - no slow clock mode yet ...\n");
-+ pr_info("AT91: PM - no slow clock mode enabled ...\n");
- /* FALLTHROUGH leaving master clock alone */
- }
-
-@@ -170,13 +300,15 @@
- case PM_SUSPEND_STANDBY:
- /*
- * NOTE: the Wait-for-Interrupt instruction needs to be
-- * in icache so the SDRAM stays in self-refresh mode until
-- * the wakeup IRQ occurs.
-+ * in icache so no SDRAM accesses are needed until the
-+ * wakeup IRQ occurs and self-refresh is terminated.
- */
- asm("b 1f; .align 5; 1:");
- asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
-- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
-- /* fall though to next state */
-+ sdram_selfrefresh_enable();
-+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
-+ sdram_selfrefresh_disable();
-+ break;
-
- case PM_SUSPEND_ON:
- asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
-@@ -191,6 +323,7 @@
- at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
-
- error:
-+ sdram_selfrefresh_disable();
- target_state = PM_SUSPEND_ON;
- at91_irq_resume();
- at91_gpio_resume();
-@@ -204,23 +337,24 @@
- .enter = at91_pm_enter,
- };
-
-+
- static int __init at91_pm_init(void)
- {
-- printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-- /* REVISIT allocations of SRAM should be dynamically managed.
-- * FIQ handlers and other components will want SRAM/TCM too...
-- */
-- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+ slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
-+ pr_info("AT91: Power Management (with slow clock mode)\n");
-+#else
-+ pr_info("AT91: Power Management\n");
- #endif
-
-- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-+#ifdef CONFIG_ARCH_AT91RM9200
-+ /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- at91_sys_write(AT91_SDRAMC_LPR, 0);
-+#endif
-
- suspend_set_ops(&at91_pm_ops);
-
-+ show_reset_status();
- return 0;
- }
- arch_initcall(at91_pm_init);
-diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-03-01 21:38:50.000000000 +0200
-@@ -0,0 +1,273 @@
-+/*
-+ * arch/arm/mach-at91/pm_slow_clock.S
-+ *
-+ * Copyright (C) 2006 Savin Zlobec
-+ *
-+ * AT91SAM9 support:
-+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+#include <asm/arch/at91rm9200_mc.h>
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9_ddrsdr.h>
-+#else
-+#include <asm/arch/at91sam926x_sdramc.h>
-+#endif
-+
-+/*
-+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
-+ * clock during suspend by adjusting its prescalar and divisor.
-+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
-+ * are errata regarding adjusting the prescalar and divisor.
-+ */
-+#undef SLOWDOWN_MASTER_CLOCK
-+
-+#define MCKRDY_TIMEOUT 1000
-+#define MOSCRDY_TIMEOUT 1000
-+#define PLLALOCK_TIMEOUT 1000
-+#define PLLBLOCK_TIMEOUT 1000
-+
-+
-+/*
-+ * Wait until master clock is ready (after switching master clock source)
-+ */
-+ .macro wait_mckrdy
-+ mov r4, #MCKRDY_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_MCKRDY
-+ beq 1b
-+2:
-+ .endm
-+
-+/*
-+ * Wait until master oscillator has stabilized.
-+ */
-+ .macro wait_moscrdy
-+ mov r4, #MOSCRDY_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_MOSCS
-+ beq 1b
-+2:
-+ .endm
-+
-+/*
-+ * Wait until PLLA has locked.
-+ */
-+ .macro wait_pllalock
-+ mov r4, #PLLALOCK_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_LOCKA
-+ beq 1b
-+2:
-+ .endm
-+
-+/*
-+ * Wait until PLLB has locked.
-+ */
-+ .macro wait_pllblock
-+ mov r4, #PLLBLOCK_TIMEOUT
-+1: sub r4, r4, #1
-+ cmp r4, #0
-+ beq 2f
-+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-+ tst r3, #AT91_PMC_LOCKB
-+ beq 1b
-+2:
-+ .endm
-+
-+ .text
-+
-+ENTRY(at91_slow_clock)
-+ /* Save registers on stack */
-+ stmfd sp!, {r0 - r12, lr}
-+
-+ /*
-+ * Register usage:
-+ * R1 = Base address of AT91_PMC
-+ * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
-+ * R3 = temporary register
-+ * R4 = temporary register
-+ */
-+ ldr r1, .at91_va_base_pmc
-+ ldr r2, .at91_va_base_sdramc
-+
-+ /* Drain write buffer */
-+ mcr p15, 0, r0, c7, c10, 4
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+ /* Put SDRAM in self-refresh mode */
-+ mov r3, #1
-+ str r3, [r2, #AT91_SDRAMC_SRR]
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+ /* Enable SDRAM self-refresh mode */
-+ ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+ str r3, .saved_sam9_lpr
-+
-+ mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+#else
-+ /* Enable SDRAM self-refresh mode */
-+ ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+ str r3, .saved_sam9_lpr
-+
-+ mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+#endif
-+
-+ /* Save Master clock setting */
-+ ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+ str r3, .saved_mckr
-+
-+ /*
-+ * Set the Master clock source to slow clock
-+ */
-+ bic r3, r3, #AT91_PMC_CSS
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+
-+#ifdef SLOWDOWN_MASTER_CLOCK
-+ /*
-+ * Set the Master Clock PRES and MDIV fields.
-+ *
-+ * See AT91RM9200 errata #27 and #28 for details.
-+ */
-+ mov r3, #0
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+#endif
-+
-+ /* Save PLLA setting and disable it */
-+ ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+ str r3, .saved_pllar
-+
-+ mov r3, #AT91_PMC_PLLCOUNT
-+ orr r3, r3, #(1 << 29) /* bit 29 always set */
-+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+
-+ wait_pllalock
-+
-+ /* Save PLLB setting and disable it */
-+ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+ str r3, .saved_pllbr
-+
-+ mov r3, #AT91_PMC_PLLCOUNT
-+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+
-+ wait_pllblock
-+
-+ /* Turn off the main oscillator */
-+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+ bic r3, r3, #AT91_PMC_MOSCEN
-+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+
-+ /* Wait for interrupt */
-+ mcr p15, 0, r0, c7, c0, 4
-+
-+ /* Turn on the main oscillator */
-+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+ orr r3, r3, #AT91_PMC_MOSCEN
-+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-+
-+ wait_moscrdy
-+
-+ /* Restore PLLB setting */
-+ ldr r3, .saved_pllbr
-+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-+
-+ wait_pllblock
-+
-+ /* Restore PLLA setting */
-+ ldr r3, .saved_pllar
-+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-+
-+ wait_pllalock
-+
-+#ifdef SLOWDOWN_MASTER_CLOCK
-+ /*
-+ * First set PRES if it was not 0,
-+ * than set CSS and MDIV fields.
-+ *
-+ * See AT91RM9200 errata #27 and #28 for details.
-+ */
-+ ldr r3, .saved_mckr
-+ tst r3, #AT91_PMC_PRES
-+ beq 2f
-+ and r3, r3, #AT91_PMC_PRES
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+#endif
-+
-+ /*
-+ * Restore master clock setting
-+ */
-+2: ldr r3, .saved_mckr
-+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-+
-+ wait_mckrdy
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+ /* Do nothing - self-refresh is automatically disabled. */
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+ /* Restore LPR on AT91CAP9 */
-+ ldr r3, .saved_sam9_lpr
-+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-+#else
-+ /* Restore LPR on AT91SAM9 */
-+ ldr r3, .saved_sam9_lpr
-+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
-+#endif
-+
-+ /* Restore registers, and return */
-+ ldmfd sp!, {r0 - r12, pc}
-+
-+
-+.saved_mckr:
-+ .word 0
-+
-+.saved_pllar:
-+ .word 0
-+
-+.saved_pllbr:
-+ .word 0
-+
-+.saved_sam9_lpr:
-+ .word 0
-+
-+.at91_va_base_pmc:
-+ .word AT91_VA_BASE_SYS + AT91_PMC
-+
-+#ifdef CONFIG_ARCH_AT91RM9200
-+.at91_va_base_sdramc:
-+ .word AT91_VA_BASE_SYS
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+.at91_va_base_sdramc:
-+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC
-+#else
-+.at91_va_base_sdramc:
-+ .word AT91_VA_BASE_SYS + AT91_SDRAMC
-+#endif
-+
-+ENTRY(at91_slow_clock_sz)
-+ .word .-at91_slow_clock
-diff -urN -x CVS linux-2.6.24/arch/arm/mm/Kconfig linux-2.6/arch/arm/mm/Kconfig
---- linux-2.6.24/arch/arm/mm/Kconfig 2008-03-01 22:02:07.000000000 +0200
-+++ linux-2.6/arch/arm/mm/Kconfig 2008-01-16 20:26:55.000000000 +0200
-@@ -171,8 +171,8 @@
- # ARM926T
- config CPU_ARM926T
- bool "Support ARM926T processor"
-- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
-- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
-+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
-+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
- select CPU_32v5
- select CPU_ABRT_EV5TJ
- select CPU_CACHE_VIVT
-diff -urN -x CVS linux-2.6.24/arch/arm/tools/mach-types linux-2.6/arch/arm/tools/mach-types
---- linux-2.6.24/arch/arm/tools/mach-types 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/tools/mach-types 2008-01-16 21:25:12.000000000 +0200
-@@ -12,7 +12,7 @@
- #
- # http://www.arm.linux.org.uk/developer/machines/?action=new
- #
--# Last update: Fri May 11 19:53:41 2007
-+# Last update: Mon Nov 12 14:39:37 2007
- #
- # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
- #
-@@ -266,7 +266,7 @@
- wismo SA1100_WISMO WISMO 249
- ezlinx ARCH_EZLINX EZLINX 250
- at91rm9200 ARCH_AT91RM9200 AT91RM9200 251
--orion ARCH_ORION ORION 252
-+adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252
- neptune ARCH_NEPTUNE NEPTUNE 253
- hackkit SA1100_HACKKIT HACKKIT 254
- pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255
-@@ -661,7 +661,7 @@
- pnx0105 MACH_PNX0105 PNX0105 646
- adcpoecpu MACH_ADCPOECPU ADCPOECPU 647
- csb637 MACH_CSB637 CSB637 648
--ml69q6203 MACH_ML69Q6203 ML69Q6203 649
-+ml675050 MACH_ML69Q6203 ML69Q6203 649
- mb9200 MACH_MB9200 MB9200 650
- kulun MACH_KULUN KULUN 651
- snapper MACH_SNAPPER SNAPPER 652
-@@ -953,7 +953,7 @@
- ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
- nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
- netdcu8 MACH_NETDCU8 NETDCU8 942
--ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
-+ml675050_dev_sys MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
- ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
- ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
- pnx4103 MACH_PNX4103 PNX4103 946
-@@ -1148,7 +1148,7 @@
- rema MACH_REMA REMA 1135
- bps1000 MACH_BPS1000 BPS1000 1136
- hw90350 MACH_HW90350 HW90350 1137
--omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
-+omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
- bluetouch MACH_BLUETOUCH BLUETOUCH 1139
- vstms MACH_VSTMS VSTMS 1140
- xsbase270 MACH_XSBASE270 XSBASE270 1141
-@@ -1214,7 +1214,7 @@
- kbat9261 MACH_KBAT9261 KBAT9261 1204
- ct1100 MACH_CT1100 CT1100 1205
- akcppxa MACH_AKCPPXA AKCPPXA 1206
--zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
-+ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207
- hitrack MACH_HITRACK HITRACK 1208
- syme1 MACH_SYME1 SYME1 1209
- syhl1 MACH_SYHL1 SYHL1 1210
-@@ -1299,7 +1299,7 @@
- h4300 MACH_H4300 H4300 1291
- goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
- mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
--adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
-+adsbitsyg5 MACH_ADSBITSIMX ADSBITSIMX 1294
- adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
- mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
- em_x270 MACH_EM_X270 EM_X270 1297
-@@ -1367,3 +1367,190 @@
- csb726 MACH_CSB726 CSB726 1359
- tik27 MACH_TIK27 TIK27 1360
- mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
-+rirm3 MACH_RIRM3 RIRM3 1362
-+pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363
-+arm920t MACH_ARM920T ARM920T 1364
-+add_abox MACH_ADD_ABOX ADD_ABOX 1365
-+add_tpid MACH_ADD_TPID ADD_TPID 1366
-+minicheck MACH_MINICHECK MINICHECK 1367
-+idam MACH_IDAM IDAM 1368
-+mario_mx MACH_MARIO_MX MARIO_MX 1369
-+vi1888 MACH_VI1888 VI1888 1370
-+zr4230 MACH_ZR4230 ZR4230 1371
-+t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372
-+syhq2 MACH_SYHQ2 SYHQ2 1373
-+computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374
-+oratis MACH_ORATIS ORATIS 1375
-+mikko MACH_MIKKO MIKKO 1376
-+holon MACH_HOLON HOLON 1377
-+olip8 MACH_OLIP8 OLIP8 1378
-+ghi270hg MACH_GHI270HG GHI270HG 1379
-+davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
-+davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
-+ocearm MACH_OCEARMTEST OCEARMTEST 1382
-+blackriver MACH_BLACKRIVER BLACKRIVER 1383
-+sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
-+cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
-+quark963 MACH_QUARK963 QUARK963 1386
-+csb735 MACH_CSB735 CSB735 1387
-+littleton MACH_LITTLETON LITTLETON 1388
-+mio_p550 MACH_MIO_P550 MIO_P550 1389
-+motion2440 MACH_MOTION2440 MOTION2440 1390
-+imm500 MACH_IMM500 IMM500 1391
-+homematic MACH_HOMEMATIC HOMEMATIC 1392
-+ermine MACH_ERMINE ERMINE 1393
-+kb9202b MACH_KB9202B KB9202B 1394
-+hs1xx MACH_HS1XX HS1XX 1395
-+studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396
-+arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397
-+dep2410k MACH_DEP2410K DEP2410K 1398
-+xxsvideo MACH_XXSVIDEO XXSVIDEO 1399
-+im4004 MACH_IM4004 IM4004 1400
-+ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401
-+lep9261 MACH_LEP9261 LEP9261 1402
-+svenmeb MACH_SVENMEB SVENMEB 1403
-+fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404
-+omap2 MACH_OMAP2 OMAP2 1405
-+nxhx MACH_NXHX NXHX 1406
-+realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407
-+ids500 MACH_IDS500 IDS500 1408
-+ors_n725 MACH_ORS_N725 ORS_N725 1409
-+hsdarm MACH_HSDARM HSDARM 1410
-+sha_pon003 MACH_SHA_PON003 SHA_PON003 1411
-+sha_pon004 MACH_SHA_PON004 SHA_PON004 1412
-+sha_pon007 MACH_SHA_PON007 SHA_PON007 1413
-+sha_pon011 MACH_SHA_PON011 SHA_PON011 1414
-+h6042 MACH_H6042 H6042 1415
-+h6043 MACH_H6043 H6043 1416
-+looxc550 MACH_LOOXC550 LOOXC550 1417
-+cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
-+app3xx MACH_APP3XX APP3XX 1419
-+sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
-+xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
-+xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
-+xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
-+xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
-+ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
-+sarge MACH_SARGE SARGE 1426
-+a696 MACH_A696 A696 1427
-+turtle1916 MACH_TURTLE TURTLE 1428
-+pxa1916 MACH_MY5910TURTLE MY5910TURTLE 1429
-+mx27_3ds MACH_MX27_3DS MX27_3DS 1430
-+bishop MACH_BISHOP BISHOP 1431
-+pxx MACH_PXX PXX 1432
-+redwood MACH_REDWOOD REDWOOD 1433
-+dummy MACH_OMAP2430DLP OMAP2430DLP 1434
-+dummy_board MACH_OMAP2430OSK OMAP2430OSK 1435
-+omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436
-+omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437
-+sardine MACH_SARDINE SARDINE 1438
-+halibut MACH_HALIBUT HALIBUT 1439
-+trout MACH_TROUT TROUT 1440
-+goldfish MACH_GOLDFISH GOLDFISH 1441
-+gesbc2440 MACH_GESBC2440 GESBC2440 1442
-+nomad MACH_NOMAD NOMAD 1443
-+rosalind MACH_ROSALIND ROSALIND 1444
-+cc9p9215 MACH_CC9P9215 CC9P9215 1445
-+cc9p9210 MACH_CC9P9210 CC9P9210 1446
-+cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447
-+cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448
-+nasffe MACH_NASFFE NASFFE 1449
-+tn2x0bd MACH_TN2X0BD TN2X0BD 1450
-+gwmpxa MACH_GWMPXA GWMPXA 1451
-+exyplus MACH_EXYPLUS EXYPLUS 1452
-+jadoo21 MACH_JADOO21 JADOO21 1453
-+looxn560 MACH_LOOXN560 LOOXN560 1454
-+bonsai MACH_BONSAI BONSAI 1455
-+adsmilgato MACH_ADSMILGATO ADSMILGATO 1456
-+gba MACH_GBA GBA 1457
-+h6044 MACH_H6044 H6044 1458
-+app MACH_APP APP 1459
-+tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460
-+herald MACH_HERMES HERMES 1461
-+artemis MACH_ARTEMIS ARTEMIS 1462
-+htctitan MACH_HTCTITAN HTCTITAN 1463
-+qranium MACH_QRANIUM QRANIUM 1464
-+add_wsc2 MACH_ADD_WSC2 ADD_WSC2 1465
-+add_medinet MACH_ADD_MEDINET ADD_MEDINET 1466
-+bboard MACH_BBOARD BBOARD 1467
-+cambria MACH_CAMBRIA CAMBRIA 1468
-+mt7xxx MACH_MT7XXX MT7XXX 1469
-+matrix512 MACH_MATRIX512 MATRIX512 1470
-+matrix522 MACH_MATRIX522 MATRIX522 1471
-+ipac5010 MACH_IPAC5010 IPAC5010 1472
-+sakura MACH_SAKURA SAKURA 1473
-+grocx MACH_GROCX GROCX 1474
-+pm9263 MACH_PM9263 PM9263 1475
-+sim_one MACH_SIM_ONE SIM_ONE 1476
-+acq132 MACH_ACQ132 ACQ132 1477
-+datr MACH_DATR DATR 1478
-+actux1 MACH_ACTUX1 ACTUX1 1479
-+actux2 MACH_ACTUX2 ACTUX2 1480
-+actux3 MACH_ACTUX3 ACTUX3 1481
-+flexit MACH_FLEXIT FLEXIT 1482
-+bh2x0bd MACH_BH2X0BD BH2X0BD 1483
-+atb2002 MACH_ATB2002 ATB2002 1484
-+xenon MACH_XENON XENON 1485
-+fm607 MACH_FM607 FM607 1486
-+matrix514 MACH_MATRIX514 MATRIX514 1487
-+matrix524 MACH_MATRIX524 MATRIX524 1488
-+inpod MACH_INPOD INPOD 1489
-+jive MACH_JIVE JIVE 1490
-+tll_mx21 MACH_TLL_MX21 TLL_MX21 1491
-+sbc2800 MACH_SBC2800 SBC2800 1492
-+cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493
-+ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494
-+ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495
-+ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496
-+aml_m8000 MACH_AML_M8000 AML_M8000 1497
-+snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498
-+omap_bbx MACH_OMAP_BBX OMAP_BBX 1499
-+ucn2410 MACH_UCN2410 UCN2410 1500
-+sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501
-+eti_c2 MACH_ETI_C2 ETI_C2 1502
-+avalanche MACH_AVALANCHE AVALANCHE 1503
-+realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504
-+dp1500 MACH_DP1500 DP1500 1505
-+apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506
-+yl9200 MACH_YL9200 YL9200 1507
-+rd88f5182 MACH_RD88F5182 RD88F5182 1508
-+kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509
-+se_poet MACH_SE_POET SE_POET 1510
-+mx31_3ds MACH_MX31_3DS MX31_3DS 1511
-+r270 MACH_R270 R270 1512
-+armour21 MACH_ARMOUR21 ARMOUR21 1513
-+dt2 MACH_DT2 DT2 1514
-+vt4 MACH_VT4 VT4 1515
-+tyco320 MACH_TYCO320 TYCO320 1516
-+adma MACH_ADMA ADMA 1517
-+wp188 MACH_WP188 WP188 1518
-+corsica MACH_CORSICA CORSICA 1519
-+bigeye MACH_BIGEYE BIGEYE 1520
-+machine_is_arm2410 MACH_MACHINE_IS_ARM2410 MACHINE_IS_ARM2410 1521
-+tll5000 MACH_TLL5000 TLL5000 1522
-+hni270 MACH_HNI_X270 HNI_X270 1523
-+qong MACH_QONG QONG 1524
-+tcompact MACH_TCOMPACT TCOMPACT 1525
-+puma5 MACH_PUMA5 PUMA5 1526
-+elara MACH_ELARA ELARA 1527
-+ellington MACH_ELLINGTON ELLINGTON 1528
-+xda_atom MACH_XDA_ATOM XDA_ATOM 1529
-+energizer2 MACH_ENERGIZER2 ENERGIZER2 1530
-+odin MACH_ODIN ODIN 1531
-+actux4 MACH_ACTUX4 ACTUX4 1532
-+esl_omap MACH_ESL_OMAP ESL_OMAP 1533
-+omap2evm MACH_OMAP2EVM OMAP2EVM 1534
-+omap3evm MACH_OMAP3EVM OMAP3EVM 1535
-+add_pcu57 MACH_ADD_PCU57 ADD_PCU57 1536
-+monaco MACH_MONACO MONACO 1537
-+levante MACH_LEVANTE LEVANTE 1538
-+tmxipx425 MACH_TMXIPX425 TMXIPX425 1539
-+leep MACH_LEEP LEEP 1540
-+raad MACH_RAAD RAAD 1541
-+dns323 MACH_DNS323 DNS323 1542
-+ap1000 MACH_AP1000 AP1000 1543
-+a9sam6432 MACH_A9SAM6432 A9SAM6432 1544
-+shiny MACH_SHINY SHINY 1545
-+omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
-+csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547
-+at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
-diff -urN -x CVS linux-2.6.24/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig
---- linux-2.6.24/drivers/char/Kconfig 2008-03-01 22:02:10.000000000 +0200
-+++ linux-2.6/drivers/char/Kconfig 2008-02-18 22:56:04.000000000 +0200
-@@ -1040,5 +1040,21 @@
-
- source "drivers/s390/char/Kconfig"
-
-+config AT91_SPI
-+ bool "SPI driver (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200
-+ default y
-+ help
-+ The SPI driver gives access to this serial bus on the AT91RM9200
-+ processor.
-+
-+config AT91_SPIDEV
-+ bool "SPI device interface (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200 && AT91_SPI
-+ default n
-+ help
-+ The SPI driver gives user mode access to this serial
-+ bus on the AT91RM9200 processor.
-+
- endmenu
-
-diff -urN -x CVS linux-2.6.24/drivers/char/Makefile linux-2.6/drivers/char/Makefile
---- linux-2.6.24/drivers/char/Makefile 2008-03-01 22:02:10.000000000 +0200
-+++ linux-2.6/drivers/char/Makefile 2007-12-31 10:43:55.000000000 +0200
-@@ -96,6 +96,8 @@
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_GPIO_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_AT91_SPI) += at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
-
- obj-$(CONFIG_MWAVE) += mwave/
- obj-$(CONFIG_AGP) += agp/
-diff -urN -x CVS linux-2.6.24/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c
---- linux-2.6.24/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/char/at91_spi.c 2007-12-31 15:18:43.000000000 +0200
-@@ -0,0 +1,336 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock; /* protect access to SPI bus */
-+static int current_device = -1; /* currently selected SPI device */
-+static struct clk *spi_clk; /* SPI clock */
-+static void __iomem *spi_base; /* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+ /* Ensure that requested device is valid */
-+ if ((device < 0) || (device >= NR_SPI_DEVICES))
-+ panic("at91_spi: spi_access_bus called with invalid device");
-+
-+ if (spi_enabled == 0) {
-+ clk_enable(spi_clk); /* Enable Peripheral clock */
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+#ifdef DEBUG_SPI
-+ printk("SPI on\n");
-+#endif
-+ }
-+ spi_enabled++;
-+
-+ /* Lock the SPI bus */
-+ down(&spi_lock);
-+ current_device = device;
-+
-+ /* Configure SPI bus for device */
-+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+ if (device != current_device)
-+ panic("at91_spi: spi_release called with invalid device");
-+
-+ /* Release the SPI bus */
-+ current_device = -1;
-+ up(&spi_lock);
-+
-+ spi_enabled--;
-+ if (spi_enabled == 0) {
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_disable(spi_clk); /* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+ printk("SPI off\n");
-+#endif
-+ }
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ int tx_size;
-+
-+ if (!list)
-+ panic("at91_spi: spi_transfer called with NULL transfer list");
-+ if (current_device == -1)
-+ panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ /* Store transfer list */
-+ device->xfers = list;
-+ list->curr = 0;
-+
-+ /* Assume there must be at least one transfer */
-+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+ /* Program PDC registers */
-+ at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+ at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+ /* Is there a second transfer? */
-+ if (list->nr_transfers > 1) {
-+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+ /* Program Next PDC registers */
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+ }
-+ else {
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+
-+ // TODO: If we are doing consecutive transfers (at high speed, or
-+ // small buffers), then it might be worth modifying the 'Delay between
-+ // Consecutive Transfers' in the CSR registers.
-+ // This is an issue if we cannot chain the next buffer fast enough
-+ // in the interrupt handler.
-+
-+ /* Enable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
-+ wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer end\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+ unsigned int status;
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+ if (!list)
-+ panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
-+
-+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+ device->tx = device->txnext; /* move next transfer to current transfer */
-+ device->rx = device->rxnext;
-+
-+ list->curr = list->curr + 1;
-+ if (list->curr == list->nr_transfers) { /* all transfers complete */
-+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
-+
-+ /* Disable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ device->xfers = NULL;
-+ complete(&transfer_complete);
-+ }
-+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+ else {
-+ int i = (list->curr)+1;
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+ int i;
-+ unsigned long scbr;
-+ struct resource *res;
-+
-+ init_MUTEX(&spi_lock);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+ return -EBUSY;
-+
-+ spi_base = ioremap(res->start, res->end - res->start + 1);
-+ if (!spi_base) {
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENOMEM;
-+ }
-+
-+ spi_clk = clk_get(NULL, "spi_clk");
-+ if (IS_ERR(spi_clk)) {
-+ printk(KERN_ERR "at91_spi: no clock defined\n");
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENODEV;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
-+
-+ /*
-+ * Calculate the correct SPI baud-rate divisor.
-+ */
-+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+ scbr = scbr + 1; /* round up */
-+
-+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+ /* Set Chip Select registers to good defaults */
-+ for (i = 0; i < 4; i++) {
-+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+ }
-+
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ memset(&spi_dev, 0, sizeof(spi_dev));
-+ spi_dev[0].pcs = 0xE;
-+ spi_dev[1].pcs = 0xD;
-+ spi_dev[2].pcs = 0xB;
-+ spi_dev[3].pcs = 0x7;
-+
-+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+ clk_put(spi_clk);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -EBUSY;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+
-+ return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_put(spi_clk);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ free_irq(AT91RM9200_ID_SPI, 0);
-+ return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+ .probe = at91spi_probe,
-+ .remove = __devexit_p(at91spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+ return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+ platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.24/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c
---- linux-2.6.24/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200
-@@ -0,0 +1,233 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ * Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+ unsigned int spi_device = (unsigned int) file->private_data;
-+
-+ struct mm_struct * mm;
-+ struct page ** maplist;
-+ struct spi_transfer_list* list;
-+ int pgcount;
-+
-+ unsigned int ofs, pagelen;
-+ int res, i, err;
-+
-+ if (!count) {
-+ return 0;
-+ }
-+
-+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!list) {
-+ return -ENOMEM;
-+ }
-+
-+ mm = current->mm;
-+
-+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+ if (pgcount >= MAX_SPI_TRANSFERS) {
-+ kfree(list);
-+ return -EFBIG;
-+ }
-+
-+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+ if (!maplist) {
-+ kfree(list);
-+ return -ENOMEM;
-+ }
-+ flush_cache_all();
-+ down_read(&mm->mmap_sem);
-+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+ up_read(&mm->mmap_sem);
-+
-+ if (err < 0) {
-+ kfree(list);
-+ kfree(maplist);
-+ return err;
-+ }
-+ pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+ /* Set default return value = transfer length */
-+ res = count;
-+
-+ /*
-+ * At this point, the virtual area buf[0] .. buf[count-1] will have
-+ * corresponding pages mapped in the physical memory and locked until
-+ * we unmap the kiobuf. The pages cannot be swapped out or moved
-+ * around.
-+ */
-+ ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+ pagelen = PAGE_SIZE - ofs;
-+ if (count < pagelen)
-+ pagelen = count;
-+
-+ for (i = 0; i < pgcount; i++) {
-+ flush_dcache_page(maplist[i]);
-+
-+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+ list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+ ofs = 0; /* all subsequent transfers start at beginning of a page */
-+ count = count - pagelen;
-+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+ }
-+ list->nr_transfers = pgcount;
-+
-+ /* Perform transfer on SPI bus */
-+ spi_access_bus(spi_device);
-+ spi_transfer(list);
-+ spi_release_bus(spi_device);
-+
-+ while (pgcount--) {
-+ page_cache_release (maplist[pgcount]);
-+ }
-+ flush_cache_all();
-+
-+ kfree(maplist);
-+ kfree(list);
-+
-+ return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ // TODO: This interface can be used to configure the SPI bus.
-+ // Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+ switch(cmd) {
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+ unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ /*
-+ * 'private_data' is actually a pointer, but we overload it with the
-+ * value we want to store.
-+ */
-+ file->private_data = (void *)spi_device;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = spidev_rd_wr,
-+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+ .ioctl = spidev_ioctl,
-+ .open = spidev_open,
-+ .release = spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+#endif
-+
-+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_DEVFS_FS
-+ devfs_mk_dir("spi");
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+ }
-+#endif
-+ printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_remove("spi/%d", i);
-+ }
-+
-+ devfs_remove("spi");
-+#endif
-+
-+ unregister_chrdev(SPI_MAJOR, "spi");
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig
---- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-03-01 22:02:10.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/Kconfig 2007-12-31 10:44:20.000000000 +0200
-@@ -88,6 +88,14 @@
- to support combined I2C messages. Use the i2c-gpio driver
- unless your system can cope with those limitations.
-
-+config I2C_AT91_CLOCKRATE
-+ prompt "Atmel AT91 I2C/TWI clock-rate"
-+ depends on I2C_AT91
-+ int
-+ default 100000
-+ help
-+ Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
-@@ -629,6 +637,14 @@
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
-
-+config I2C_PCA
-+ tristate "PCA9564"
-+ depends on I2C
-+ select I2C_ALGOPCA
-+ help
-+ This driver support the Philips PCA 9564 Parallel bus to I2C
-+ bus controller.
-+
- config I2C_PCA_ISA
- tristate "PCA9564 on an ISA bus"
- depends on ISA
-diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile
---- linux-2.6.24/drivers/i2c/busses/Makefile 2008-03-01 22:02:10.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/Makefile 2007-12-31 10:44:20.000000000 +0200
-@@ -30,6 +30,7 @@
- obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
- obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
- obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
-+obj-$(CONFIG_I2C_PCA) += i2c-pca.o
- obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
- obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
- obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
-diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.24/drivers/i2c/busses/i2c-at91.c 2008-03-01 22:02:10.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
-
--#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
-
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
-
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
- at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
-
- /* Calcuate clock dividers */
-- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- cdiv = cdiv + 1; /* round up */
- ckdiv = 0;
- while (cdiv > 255) {
-@@ -61,11 +64,12 @@
- cdiv = cdiv >> 1;
- }
-
-- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
-- if (ckdiv > 5) {
-- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
-- ckdiv = 5;
-- }
-+ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 5;
-+ } else if (ckdiv > 7) {
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 7;
- }
-
- at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.24/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200
-@@ -0,0 +1,213 @@
-+/*
-+ * Platform driver for PCA9564 I2C bus controller.
-+ *
-+ * (C) 2006 Andrew Victor
-+ *
-+ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
-+ * Copyright (C) 2004 Arcom Control Systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-pca.h>
-+
-+#include <asm/io.h>
-+
-+#include "../algos/i2c-algo-pca.h"
-+
-+#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
-+#define PCA_CLOCK I2C_PCA_CON_59kHz
-+
-+//#define REG_SHIFT 2
-+#define REG_SHIFT 0
-+
-+//#define DEBUG_IO
-+
-+#define PCA_IO_SIZE 4
-+
-+static void __iomem *base_addr;
-+static int irq;
-+static wait_queue_head_t pca_wait;
-+
-+static int pca_getown(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_OWN_ADDRESS;
-+}
-+
-+static int pca_getclock(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_CLOCK;
-+}
-+
-+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
-+{
-+#ifdef DEBUG_IO
-+ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-+ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
-+#endif
-+ udelay(1);
-+ outb(val, base_addr + (reg << REG_SHIFT));
-+}
-+
-+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
-+{
-+ int res;
-+
-+ udelay(1);
-+ res = inb(base_addr + (reg << REG_SHIFT));
-+#ifdef DEBUG_IO
-+ {
-+ static char *names[] = { "STA", "DAT", "ADR", "CON" };
-+ printk("*** read %s => %#04x\n", names[reg], res);
-+ }
-+#endif
-+ return res;
-+}
-+
-+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
-+{
-+ int ret = 0;
-+
-+ if (irq > -1) {
-+ ret = wait_event_interruptible(pca_wait,
-+ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
-+ } else {
-+ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
-+ udelay(100);
-+ }
-+ return ret;
-+}
-+
-+static irqreturn_t pca_handler(int this_irq, void *dev_id)
-+{
-+ wake_up_interruptible(&pca_wait);
-+ return IRQ_HANDLED;
-+}
-+
-+static struct i2c_algo_pca_data pca_i2c_data = {
-+ .get_own = pca_getown,
-+ .get_clock = pca_getclock,
-+ .write_byte = pca_writebyte,
-+ .read_byte = pca_readbyte,
-+ .wait_for_interrupt = pca_waitforinterrupt,
-+};
-+
-+static struct i2c_adapter pca_i2c_ops = {
-+ .owner = THIS_MODULE,
-+ .id = I2C_HW_A_PLAT,
-+ .algo_data = &pca_i2c_data,
-+ .name = "PCA9564",
-+ .class = I2C_CLASS_HWMON,
-+};
-+
-+static int __devinit pca_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ init_waitqueue_head(&pca_wait);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+
-+ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
-+ return -ENXIO;
-+
-+ base_addr = ioremap(res->start, PCA_IO_SIZE);
-+ if (base_addr == NULL)
-+ goto out_region;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq > -1) {
-+ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
-+ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
-+ goto out_remap;
-+ }
-+ }
-+
-+ /* set up the driverfs linkage to our parent device */
-+ pca_i2c_ops.dev.parent = &pdev->dev;
-+
-+ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
-+ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
-+ goto out_irq;
-+ }
-+
-+ return 0;
-+
-+ out_irq:
-+ if (irq > -1)
-+ free_irq(irq, &pca_i2c_ops);
-+
-+ out_remap:
-+ iounmap(base_addr);
-+
-+ out_region:
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+ return -ENODEV;
-+}
-+
-+static int __devexit pca_i2c_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ i2c_del_adapter(&pca_i2c_ops);
-+
-+ if (irq > 0)
-+ free_irq(irq, NULL);
-+
-+ iounmap(base_addr);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver pca_i2c_driver = {
-+ .probe = pca_i2c_probe,
-+ .remove = __devexit_p(pca_i2c_remove),
-+ .driver = {
-+ .name = "pca9564",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init pca_i2c_init(void)
-+{
-+ return platform_driver_register(&pca_i2c_driver);
-+}
-+
-+static void __exit pca_i2c_exit(void)
-+{
-+ platform_driver_unregister(&pca_i2c_driver);
-+}
-+
-+module_init(pca_i2c_init);
-+module_exit(pca_i2c_exit);
-+
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("PCA9564 platform driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.24/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c
---- linux-2.6.24/drivers/mmc/host/at91_mci.c 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-02-25 22:21:36.000000000 +0200
-@@ -70,10 +70,11 @@
-
- #include <asm/io.h>
- #include <asm/irq.h>
-+#include <asm/gpio.h>
-+
- #include <asm/mach/mmc.h>
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
--#include <asm/arch/gpio.h>
- #include <asm/arch/at91_mci.h>
-
- #define DRIVER_NAME "at91_mci"
-@@ -658,13 +659,14 @@
- /* maybe switch power to the card */
- if (host->board->vcc_pin) {
- switch (ios->power_mode) {
-- case MMC_POWER_OFF:
-- at91_set_gpio_value(host->board->vcc_pin, 0);
-- break;
-- case MMC_POWER_UP:
-- case MMC_POWER_ON:
-- at91_set_gpio_value(host->board->vcc_pin, 1);
-- break;
-+ case MMC_POWER_OFF:
-+ gpio_set_value(host->board->vcc_pin, 0);
-+ break;
-+ case MMC_POWER_UP:
-+ gpio_set_value(host->board->vcc_pin, 1);
-+ break;
-+ default:
-+ break;
- }
- }
- }
-@@ -768,7 +770,7 @@
- static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
- {
- struct at91mci_host *host = _host;
-- int present = !at91_get_gpio_value(irq);
-+ int present = !gpio_get_value(irq_to_gpio(irq));
-
- /*
- * we expect this irq on both insert and remove,
-@@ -793,7 +795,7 @@
- struct at91mci_host *host = mmc_priv(mmc);
-
- if (host->board->wp_pin) {
-- read_only = at91_get_gpio_value(host->board->wp_pin);
-+ read_only = gpio_get_value(host->board->wp_pin);
- printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
- (read_only ? "read-only" : "read-write") );
- }
-@@ -820,8 +822,6 @@
- struct resource *res;
- int ret;
-
-- pr_debug("Probe MCI devices\n");
--
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENXIO;
-@@ -831,9 +831,9 @@
-
- mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
- if (!mmc) {
-- pr_debug("Failed to allocate mmc host\n");
-- release_mem_region(res->start, res->end - res->start + 1);
-- return -ENOMEM;
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
-+ goto fail6;
- }
-
- mmc->ops = &at91_mci_ops;
-@@ -853,19 +853,44 @@
- if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- else
-- printk("AT91 MMC: 4 wire bus mode not supported"
-+ dev_warn(&pdev->dev, "4 wire bus mode not supported"
- " - using 1 wire\n");
- }
-
- /*
-+ * Reserve GPIOs ... board init code makes sure these pins are set
-+ * up as GPIOs with the right direction (input, except for vcc)
-+ */
-+ if (host->board->det_pin) {
-+ ret = gpio_request(host->board->det_pin, "mmc_detect");
-+ if (ret < 0) {
-+ dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
-+ goto fail5;
-+ }
-+ }
-+ if (host->board->wp_pin) {
-+ ret = gpio_request(host->board->wp_pin, "mmc_wp");
-+ if (ret < 0) {
-+ dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
-+ goto fail4;
-+ }
-+ }
-+ if (host->board->vcc_pin) {
-+ ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
-+ if (ret < 0) {
-+ dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
-+ goto fail3;
-+ }
-+ }
-+
-+ /*
- * Get Clock
- */
- host->mci_clk = clk_get(&pdev->dev, "mci_clk");
- if (IS_ERR(host->mci_clk)) {
-- printk(KERN_ERR "AT91 MMC: no clock defined.\n");
-- mmc_free_host(mmc);
-- release_mem_region(res->start, res->end - res->start + 1);
-- return -ENODEV;
-+ ret = -ENODEV;
-+ dev_dbg(&pdev->dev, "no mci_clk?\n");
-+ goto fail2;
- }
-
- /*
-@@ -873,10 +898,8 @@
- */
- host->baseaddr = ioremap(res->start, res->end - res->start + 1);
- if (!host->baseaddr) {
-- clk_put(host->mci_clk);
-- mmc_free_host(mmc);
-- release_mem_region(res->start, res->end - res->start + 1);
-- return -ENOMEM;
-+ ret = -ENOMEM;
-+ goto fail1;
- }
-
- /*
-@@ -890,15 +913,11 @@
- * Allocate the MCI interrupt
- */
- host->irq = platform_get_irq(pdev, 0);
-- ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
-+ ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
-+ mmc_hostname(mmc), host);
- if (ret) {
-- printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
-- clk_disable(host->mci_clk);
-- clk_put(host->mci_clk);
-- mmc_free_host(mmc);
-- iounmap(host->baseaddr);
-- release_mem_region(res->start, res->end - res->start + 1);
-- return ret;
-+ dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
-+ goto fail0;
- }
-
- platform_set_drvdata(pdev, mmc);
-@@ -907,8 +926,7 @@
- * Add host to MMC layer
- */
- if (host->board->det_pin) {
-- host->present = !at91_get_gpio_value(host->board->det_pin);
-- device_init_wakeup(&pdev->dev, 1);
-+ host->present = !gpio_get_value(host->board->det_pin);
- }
- else
- host->present = -1;
-@@ -919,15 +937,38 @@
- * monitor card insertion/removal if we can
- */
- if (host->board->det_pin) {
-- ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
-- 0, DRIVER_NAME, host);
-+ ret = request_irq(gpio_to_irq(host->board->det_pin),
-+ at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
- if (ret)
-- printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
-+ dev_warn(&pdev->dev, "request MMC detect irq failed\n");
-+ else
-+ device_init_wakeup(&pdev->dev, 1);
- }
-
- pr_debug("Added MCI driver\n");
-
- return 0;
-+
-+fail0:
-+ clk_disable(host->mci_clk);
-+ iounmap(host->baseaddr);
-+fail1:
-+ clk_put(host->mci_clk);
-+fail2:
-+ if (host->board->vcc_pin)
-+ gpio_free(host->board->vcc_pin);
-+fail3:
-+ if (host->board->wp_pin)
-+ gpio_free(host->board->wp_pin);
-+fail4:
-+ if (host->board->det_pin)
-+ gpio_free(host->board->det_pin);
-+fail5:
-+ mmc_free_host(mmc);
-+fail6:
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ dev_err(&pdev->dev, "probe failed, err %d\n", ret);
-+ return ret;
- }
-
- /*
-@@ -945,9 +986,10 @@
- host = mmc_priv(mmc);
-
- if (host->board->det_pin) {
-+ if (device_can_wakeup(&pdev->dev))
-+ free_irq(gpio_to_irq(host->board->det_pin), host);
- device_init_wakeup(&pdev->dev, 0);
-- free_irq(host->board->det_pin, host);
-- cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(host->board->det_pin);
- }
-
- at91_mci_disable(host);
-@@ -957,6 +999,11 @@
- clk_disable(host->mci_clk); /* Disable the peripheral clock */
- clk_put(host->mci_clk);
-
-+ if (host->board->vcc_pin)
-+ gpio_free(host->board->vcc_pin);
-+ if (host->board->wp_pin)
-+ gpio_free(host->board->wp_pin);
-+
- iounmap(host->baseaddr);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start + 1);
-diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig
---- linux-2.6.24/drivers/mtd/devices/Kconfig 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200
-@@ -270,5 +270,17 @@
- LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- you have managed to wipe the first block.
-
--endmenu
-+config MTD_AT91_DATAFLASH
-+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+ help
-+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+ If you have such a board, say 'Y'.
-+
-+config DATAFLASH_ALWAYS_ADD_DEVICE
-+ bool "Register whole DataFlash device"
-+ depends on MTD_AT91_DATAFLASH
-+ help
-+ Always add the whole DataFlash device when using MTD partitions.
-
-+endmenu
-diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile
---- linux-2.6.24/drivers/mtd/devices/Makefile 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200
-@@ -17,3 +17,4 @@
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.24/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200
-@@ -0,0 +1,673 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/mach-types.h>
-+
-+#include <asm/arch/spi.h>
-+
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
-+
-+#define OP_READ_CONTINUOUS 0xE8
-+#define OP_READ_PAGE 0xD2
-+#define OP_READ_BUFFER1 0xD4
-+#define OP_READ_BUFFER2 0xD6
-+#define OP_READ_STATUS 0xD7
-+
-+#define OP_ERASE_PAGE 0x81
-+#define OP_ERASE_BLOCK 0x50
-+
-+#define OP_TRANSFER_BUF1 0x53
-+#define OP_TRANSFER_BUF2 0x55
-+#define OP_COMPARE_BUF1 0x60
-+#define OP_COMPARE_BUF2 0x61
-+
-+#define OP_PROGRAM_VIA_BUF1 0x82
-+#define OP_PROGRAM_VIA_BUF2 0x85
-+
-+struct dataflash_local
-+{
-+ int spi; /* SPI chip-select number */
-+
-+ unsigned int page_size; /* number of bytes per page */
-+ unsigned short page_offset; /* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 6 * 32 * 8 * 528, /* 6 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
-+ }
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 4 * 64 * 8 * 528, /* 4 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
-+ }
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ name: "romboot",
-+ offset: 0,
-+ size: 16 * 1056, /* 160 Kb */
-+ mask_flags: MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ name: "uboot",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 128 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "kernel",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 1024 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "filesystem",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#elif defined(CONFIG_MACH_MULTMDP)
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "configuration",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 20 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1520 * 1056,
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
-+ }
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
-+ SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+ If this is not valid, then either (i) each dataflash 'priv' structure
-+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+ another mechanism. */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+ struct spi_transfer_list* list = spi_transfer_desc;
-+
-+ list->tx[0] = tx; list->txlen[0] = tx_len;
-+ list->rx[0] = rx; list->rxlen[0] = rx_len;
-+
-+ list->tx[1] = txnext; list->txlen[1] = txnext_len;
-+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
-+
-+ list->nr_transfers = nr;
-+
-+ return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return;
-+
-+ do {
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ } while ((command[1] & 0x80) == 0);
-+
-+ kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+ unsigned short status;
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return 0;
-+
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ status = command[1];
-+
-+ kfree(command);
-+ return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+ /* Sanity checks */
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+ return -EINVAL;
-+ if ((instr->addr % priv->page_size) != 0)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ while (instr->len > 0) {
-+ /* Calculate flash page address */
-+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+ command[0] = OP_ERASE_PAGE;
-+ command[1] = (pageaddr & 0x00FF0000) >> 16;
-+ command[2] = (pageaddr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+ at91_dataflash_waitready(); /* poll status until ready */
-+ spi_release_bus(priv->spi);
-+
-+ instr->addr += priv->page_size; /* next page */
-+ instr->len -= priv->page_size;
-+ }
-+
-+ kfree(command);
-+
-+ /* Inform MTD subsystem that erase is complete */
-+ instr->state = MTD_ERASE_DONE;
-+ if (instr->callback)
-+ instr->callback(instr);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ * from : Start offset in flash device
-+ * len : Amount to read
-+ * retlen : About of data actually read
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int addr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ /* Calculate flash page/byte address */
-+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+ command = kmalloc(8, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ command[0] = OP_READ_CONTINUOUS;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+ spi_release_bus(priv->spi);
-+
-+ *retlen = len;
-+ kfree(command);
-+ return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ * to : Start offset in flash device
-+ * len : Amount to write
-+ * retlen : Amount of data actually written
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr, addr, offset, writelen;
-+ size_t remaining;
-+ u_char *writebuf;
-+ unsigned short status;
-+ int res = 0;
-+ char* command;
-+ char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ pageaddr = ((unsigned)to / priv->page_size);
-+ offset = ((unsigned)to % priv->page_size);
-+ if (offset + len > priv->page_size)
-+ writelen = priv->page_size - offset;
-+ else
-+ writelen = len;
-+ writebuf = (u_char *)buf;
-+ remaining = len;
-+
-+ /* Allocate temporary buffer */
-+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+ if (!tmpbuf) {
-+ kfree(command);
-+ return -ENOMEM;
-+ }
-+
-+ /* Gain access to the SPI bus */
-+ spi_access_bus(priv->spi);
-+
-+ while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+ /* (1) Transfer to Buffer1 */
-+ if (writelen != priv->page_size) {
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_TRANSFER_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+ }
-+
-+ /* (2) Program via Buffer1 */
-+ addr = (pageaddr << priv->page_offset) + offset;
-+ command[0] = OP_PROGRAM_VIA_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+ at91_dataflash_waitready();
-+
-+ /* (3) Compare to Buffer1 */
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_COMPARE_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+
-+ /* Get result of the compare operation */
-+ status = at91_dataflash_status();
-+ if (status & 0x40) {
-+ printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+ remaining = 0;
-+ writelen = 0;
-+ res = -EIO;
-+ }
-+
-+ remaining = remaining - writelen;
-+ pageaddr++;
-+ offset = 0;
-+ writebuf += writelen;
-+ *retlen += writelen;
-+
-+ if (remaining > priv->page_size)
-+ writelen = priv->page_size;
-+ else
-+ writelen = remaining;
-+ }
-+
-+ /* Release SPI bus */
-+ spi_release_bus(priv->spi);
-+
-+ kfree(tmpbuf);
-+ kfree(command);
-+ return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+ int nr_pages, int pagesize, int pageoffset)
-+{
-+ struct mtd_info *device;
-+ struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *mtd_parts = 0;
-+ int mtd_parts_nr = 0;
-+#endif
-+
-+ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+ return 0;
-+ }
-+
-+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+ if (!device)
-+ return -ENOMEM;
-+ memset(device, 0, sizeof(struct mtd_info));
-+
-+ device->name = (char *)&device[1];
-+ sprintf(device->name, "%s.spi%d", name, channel);
-+ device->size = nr_pages * pagesize;
-+ device->erasesize = pagesize;
-+ device->writesize = pagesize;
-+ device->owner = THIS_MODULE;
-+ device->type = MTD_DATAFLASH;
-+ device->flags = MTD_WRITEABLE;
-+ device->erase = at91_dataflash_erase;
-+ device->read = at91_dataflash_read;
-+ device->write = at91_dataflash_write;
-+
-+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+ if (!priv) {
-+ kfree(device);
-+ return -ENOMEM;
-+ }
-+ memset(priv, 0, sizeof(struct dataflash_local));
-+
-+ priv->spi = channel;
-+ priv->page_size = pagesize;
-+ priv->page_offset = pageoffset;
-+ device->priv = priv;
-+
-+ mtd_devices[nr_devices] = device;
-+ nr_devices++;
-+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+ if (mtd_parts_nr <= 0) {
-+ switch (IDsize) {
-+ case SZ_2M:
-+ mtd_parts = static_partitions_2M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+ break;
-+ case SZ_4M:
-+ mtd_parts = static_partitions_4M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+ break;
-+ case SZ_8M:
-+ mtd_parts = static_partitions_8M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+ break;
-+ }
-+ }
-+
-+ if (mtd_parts_nr > 0) {
-+#ifdef CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE
-+ add_mtd_device(device);
-+#endif
-+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+ }
-+#endif
-+ return add_mtd_device(device); /* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ * Device Density ID code Nr Pages Page Size Page offset
-+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
-+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
-+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
-+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
-+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
-+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
-+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
-+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+ int res = 0;
-+ unsigned short status;
-+
-+ spi_access_bus(channel);
-+ status = at91_dataflash_status();
-+ spi_release_bus(channel);
-+ if (status != 0xff) { /* no dataflash device there */
-+ switch (status & 0x3c) {
-+ case 0x0c: /* 0 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+ break;
-+ case 0x14: /* 0 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+ break;
-+ case 0x1c: /* 0 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+ break;
-+ case 0x24: /* 1 0 0 1 */
-+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+ break;
-+ case 0x2c: /* 1 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+ break;
-+ case 0x34: /* 1 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+ break;
-+ case 0x3c: /* 1 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+ break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+// case 0x10: /* 0 1 0 0 */
-+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+// break;
-+ default:
-+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+ }
-+ }
-+
-+ return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!spi_transfer_desc)
-+ return -ENOMEM;
-+
-+ /* DataFlash (SPI chip select 0) */
-+ at91_dataflash_detect(0);
-+
-+ if (machine_is_sweda_tms())
-+ at91_dataflash_detect(1); /* DataFlash device (SPI chip select 1) */
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card (SPI chip select 3) */
-+ at91_dataflash_detect(3);
-+#endif
-+
-+ return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+ if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+ del_mtd_partitions(mtd_devices[i]);
-+#else
-+ del_mtd_device(mtd_devices[i]);
-+#endif
-+ kfree(mtd_devices[i]->priv);
-+ kfree(mtd_devices[i]);
-+ }
-+ }
-+ nr_devices = 0;
-+ kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c linux-2.6/drivers/mtd/devices/mtd_dataflash.c
---- linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/mtd_dataflash.c 2007-12-31 10:44:31.000000000 +0200
-@@ -420,7 +420,7 @@
- status = dataflash_waitready(priv->spi);
-
- /* Check result of the compare operation */
-- if ((status & (1 << 6)) == 1) {
-+ if (status & (1 << 6)) {
- printk(KERN_ERR "%s: compare page %u, err %d\n",
- spi->dev.bus_id, pageaddr, status);
- remaining = 0;
-diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig
---- linux-2.6.24/drivers/mtd/nand/Kconfig 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/mtd/nand/Kconfig 2008-03-04 21:14:54.000000000 +0200
-@@ -279,6 +279,47 @@
- Enables support for NAND Flash / Smart Media Card interface
- on Atmel AT91 processors.
-
-+choice
-+ prompt "ECC management for NAND Flash / SmartMedia on AT91"
-+ depends on MTD_NAND_AT91
-+
-+config MTD_NAND_AT91_ECC_SOFT
-+ bool "Software ECC"
-+ depends on MTD_NAND_AT91
-+ help
-+ Uses software ECC.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+config MTD_NAND_AT91_ECC_HW
-+ bool "Hardware ECC"
-+ depends on MTD_NAND_AT91 && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9)
-+ help
-+ Uses hardware ECC provided by the AT91 processor
-+ instead of software ECC.
-+ The hardware ECC controller is capable of single bit error
-+ correction and 2-bit random detection per page.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+ If unsure, say Y
-+
-+config MTD_NAND_AT91_ECC_NONE
-+ bool "No ECC (Testing Only)"
-+ depends on MTD_NAND_AT91
-+ help
-+ No ECC will be used.
-+ It's not a good idea and it should be reserved for testing
-+ purpose only.
-+
-+ If unsure, say N
-+
-+endchoice
-+
- config MTD_NAND_CM_X270
- tristate "Support for NAND Flash on CM-X270 modules"
- depends on MTD_NAND && MACH_ARMCORE
-diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c
---- linux-2.6.24/drivers/mtd/nand/at91_nand.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-03-04 21:41:16.000000000 +0200
-@@ -9,6 +9,15 @@
- * Derived from drivers/mtd/spia.c
- * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
- *
-+ *
-+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
-+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
-+ *
-+ * Derived from Das U-Boot source code
-+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
-+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-@@ -28,12 +37,54 @@
- #include <asm/hardware.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-+#include <asm/arch/at91_ecc.h>
-+
-+#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
-+#define hard_ecc 1
-+#else
-+#define hard_ecc 0
-+#endif
-+
-+#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
-+#define no_ecc 1
-+#else
-+#define no_ecc 0
-+#endif
-+
-+/* Register access macros */
-+#define ecc_readl(base, reg) __raw_readl(base + reg)
-+#define ecc_writel(base, reg, value) __raw_writel((value), base + reg)
-+
-+
-+/*
-+ * OOB layout for large page size.
-+ * bad block info is on bytes 0 and 1
-+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
-+ */
-+static struct nand_ecclayout at91_oobinfo_large = {
-+ .eccbytes = 4,
-+ .eccpos = {60, 61, 62, 63},
-+ .oobfree = { {2, 58} },
-+};
-+
-+/*
-+ * OOB layout for small page size
-+ * bad block info is on bytes 4 and 5
-+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
-+ */
-+static struct nand_ecclayout at91_oobinfo_small = {
-+ .eccbytes = 4,
-+ .eccpos = {0, 1, 2, 3},
-+ .oobfree = { {6, 10} },
-+};
-
- struct at91_nand_host {
- struct nand_chip nand_chip;
- struct mtd_info mtd;
- void __iomem *io_base;
- struct at91_nand_data *board;
-+ struct device *dev;
-+ void __iomem *ecc;
- };
-
- /*
-@@ -82,10 +133,250 @@
- at91_set_gpio_value(host->board->enable_pin, 1);
- }
-
-+/*
-+ * write oob for small pages
-+ */
-+static int at91_nand_write_oob_512(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page)
-+{
-+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-+ int eccsize = chip->ecc.size, length = mtd->oobsize;
-+ int len, pos, status = 0;
-+ const uint8_t *bufpoi = chip->oob_poi;
-+
-+ pos = eccsize + chunk;
-+
-+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-+ len = min_t(int, length, chunk);
-+ chip->write_buf(mtd, bufpoi, len);
-+ bufpoi += len;
-+ length -= len;
-+ if (length > 0)
-+ chip->write_buf(mtd, bufpoi, length);
-+
-+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+ status = chip->waitfunc(mtd, chip);
-+
-+ return status & NAND_STATUS_FAIL ? -EIO : 0;
-+
-+}
-+
-+/*
-+ * read oob for small pages
-+ */
-+static int at91_nand_read_oob_512(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page, int sndcmd)
-+{
-+ if (sndcmd) {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ sndcmd = 0;
-+ }
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ return sndcmd;
-+}
-+
-+/*
-+ * Calculate HW ECC
-+ *
-+ * mtd: MTD block structure
-+ * dat: raw data (unused)
-+ * ecc_code: buffer for ECC
-+ */
-+static int at91_nand_calculate(struct mtd_info *mtd,
-+ const u_char *dat, unsigned char *ecc_code)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct at91_nand_host *host = nand_chip->priv;
-+ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-+ unsigned int ecc_value;
-+
-+ /* get the first 2 ECC bytes */
-+ ecc_value = ecc_readl(host->ecc, AT91_ECC_PR) & (AT91_ECC_BITADDR | AT91_ECC_WORDADDR);
-+
-+ ecc_code[eccpos[0]] = ecc_value & 0xFF;
-+ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-+
-+ /* get the last 2 ECC bytes */
-+ ecc_value = ecc_readl(host->ecc, AT91_ECC_NPR) & AT91_ECC_NPARITY;
-+
-+ ecc_code[eccpos[2]] = ecc_value & 0xFF;
-+ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-+
-+ return 0;
-+}
-+
-+/*
-+ * HW ECC read page function
-+ *
-+ * mtd: mtd info structure
-+ * chip: nand chip info structure
-+ * buf: buffer to store read data
-+ */
-+static int at91_nand_read_page(struct mtd_info *mtd,
-+ struct nand_chip *chip, uint8_t *buf)
-+{
-+ int eccsize = chip->ecc.size;
-+ int eccbytes = chip->ecc.bytes;
-+ uint32_t *eccpos = chip->ecc.layout->eccpos;
-+ uint8_t *p = buf;
-+ uint8_t *oob = chip->oob_poi;
-+ uint8_t *ecc_pos;
-+ int stat;
-+
-+ /* read the page */
-+ chip->read_buf(mtd, p, eccsize);
-+
-+ /* move to ECC position if needed */
-+ if (eccpos[0] != 0) {
-+ /*
-+ * This only works on large pages because the ECC controller
-+ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
-+ * Anyway, for small pages, the eccpos[0] == 0
-+ */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-+ mtd->writesize + eccpos[0], -1);
-+ }
-+
-+ /* the ECC controller needs to read the ECC just after the data */
-+ ecc_pos = oob + eccpos[0];
-+ chip->read_buf(mtd, ecc_pos, eccbytes);
-+
-+ /* check if there's an error */
-+ stat = chip->ecc.correct(mtd, p, oob, NULL);
-+
-+ if (stat < 0)
-+ mtd->ecc_stats.failed++;
-+ else
-+ mtd->ecc_stats.corrected += stat;
-+
-+ /* get back to oob start (end of page) */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-+
-+ /* read the oob */
-+ chip->read_buf(mtd, oob, mtd->oobsize);
-+
-+ return 0;
-+}
-+
-+/*
-+ * HW ECC Correction
-+ *
-+ * mtd: MTD block structure
-+ * dat: raw data read from the chip
-+ * read_ecc: ECC from the chip (unused)
-+ * isnull: unused
-+ *
-+ * Detect and correct a 1 bit error for a page
-+ */
-+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
-+ u_char *read_ecc, u_char *isnull)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct at91_nand_host *host = nand_chip->priv;
-+ unsigned int ecc_status;
-+ unsigned int ecc_word, ecc_bit;
-+
-+ /* get the status from the Status Register */
-+ ecc_status = ecc_readl(host->ecc, AT91_ECC_SR);
-+
-+ /* if there's no error */
-+ if (likely(!(ecc_status & AT91_ECC_RECERR)))
-+ return 0;
-+
-+ /* get error bit offset (4 bits) */
-+ ecc_bit = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_BITADDR;
-+ /* get word address (12 bits) */
-+ ecc_word = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_WORDADDR;
-+ ecc_word >>= 4;
-+
-+ /* if there are multiple errors */
-+ if (ecc_status & AT91_ECC_MULERR) {
-+ /* Check if it is a freshly erased block (filled with 0xff) */
-+ if ((ecc_bit == AT91_ECC_BITADDR)
-+ && (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
-+ /* the block has just been erased, return OK */
-+ return 0;
-+ }
-+ /*
-+ * It doesn't seems to be a freshly-erased block.
-+ * We can't correct so many errors.
-+ */
-+ dev_dbg(host->dev, "at91_nand : multiple errors detected."
-+ " Unable to correct.\n");
-+ return -EIO;
-+ }
-+
-+ /* if there's a single bit error : we can correct it */
-+ if (ecc_status & AT91_ECC_ECCERR) {
-+ /*
-+ * There's nothing much to do here.
-+ * The bit error is on the ECC itself.
-+ */
-+ dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
-+ " Nothing to correct\n");
-+ return 0;
-+ }
-+
-+ dev_dbg(host->dev, "at91_nand : one bit error on data."
-+ " (word offset in the page :"
-+ " 0x%x bit offset : 0x%x)\n",
-+ ecc_word, ecc_bit);
-+ /* correct the error */
-+ if (nand_chip->options & NAND_BUSWIDTH_16) {
-+ /* 16 bits words */
-+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-+ } else {
-+ /* 8 bits words */
-+ dat[ecc_word] ^= (1 << ecc_bit);
-+ }
-+ dev_dbg(host->dev, "at91_nand : error corrected\n");
-+ return 1;
-+}
-+
-+/*
-+ * Enable HW ECC : unsused
-+ */
-+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
-+
-+/*
-+ * Over-ride the standard functions with our optimized versions.
-+ * We can use read/write blocks to move data to/from the controller.
-+ */
-+static void at91_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-+}
-+
-+static void at91_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-+}
-+
-+static void at91_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-+}
-+
-+static void at91_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-+}
-+
-+
- #ifdef CONFIG_MTD_PARTITIONS
--const char *part_probes[] = { "cmdlinepart", NULL };
-+static const char *part_probes[] = { "cmdlinepart", NULL };
- #endif
-
-+static char* ecc_modes[] __initdata = { "No", "Software", "Hardware" };
-+
- /*
- * Probe for the NAND device.
- */
-@@ -94,6 +385,8 @@
- struct at91_nand_host *host;
- struct mtd_info *mtd;
- struct nand_chip *nand_chip;
-+ struct resource *regs;
-+ struct resource *mem;
- int res;
-
- #ifdef CONFIG_MTD_PARTITIONS
-@@ -108,8 +401,13 @@
- return -ENOMEM;
- }
-
-- host->io_base = ioremap(pdev->resource[0].start,
-- pdev->resource[0].end - pdev->resource[0].start + 1);
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!mem) {
-+ printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
-+ return -ENXIO;
-+ }
-+
-+ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
- if (host->io_base == NULL) {
- printk(KERN_ERR "at91_nand: ioremap failed\n");
- kfree(host);
-@@ -119,6 +417,7 @@
- mtd = &host->mtd;
- nand_chip = &host->nand_chip;
- host->board = pdev->dev.platform_data;
-+ host->dev = &pdev->dev;
-
- nand_chip->priv = host; /* link the private data structures */
- mtd->priv = nand_chip;
-@@ -132,11 +431,40 @@
- if (host->board->rdy_pin)
- nand_chip->dev_ready = at91_nand_device_ready;
-
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!regs && hard_ecc) {
-+ printk(KERN_ERR "at91_nand: can't get I/O resource "
-+ "regs\nFalling back on software ECC\n");
-+ }
-+
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
-+ if (no_ecc)
-+ nand_chip->ecc.mode = NAND_ECC_NONE;
-+ if (hard_ecc && regs) {
-+ host->ecc = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
-+ host->ecc += regs->start;
-+
-+ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* HW SYNDROME ECC */
-+ nand_chip->ecc.calculate = at91_nand_calculate; /* function called after a write */
-+ nand_chip->ecc.correct = at91_nand_correct; /* function called after a read */
-+ nand_chip->ecc.hwctl = at91_nand_hwctl; /* unused */
-+ nand_chip->ecc.read_page = at91_nand_read_page; /* read page function */
-+ nand_chip->ecc.bytes = 4; /* 4 ECC bytes for any page size */
-+ nand_chip->ecc.prepad = 0;
-+ nand_chip->ecc.postpad = 0;
-+ }
-+
- nand_chip->chip_delay = 20; /* 20us command delay time */
-
-- if (host->board->bus_width_16) /* 16-bit bus width */
-+ if (host->board->bus_width_16) { /* 16-bit bus width */
- nand_chip->options |= NAND_BUSWIDTH_16;
-+ nand_chip->read_buf = at91_read_buf16;
-+ nand_chip->write_buf = at91_write_buf16;
-+ }
-+ else {
-+ nand_chip->read_buf = at91_read_buf8;
-+ nand_chip->write_buf = at91_write_buf8;
-+ }
-
- platform_set_drvdata(pdev, host);
- at91_nand_enable(host);
-@@ -149,21 +477,73 @@
- }
- }
-
-- /* Scan to find existance of the device */
-- if (nand_scan(mtd, 1)) {
-+ /* first scan to find the device and get the page size */
-+ if (nand_scan_ident(mtd, 1)) {
-+ res = -ENXIO;
-+ goto out;
-+ }
-+
-+ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-+ /* ECC is calculated for the whole page (1 step) */
-+ nand_chip->ecc.size = mtd->writesize;
-+
-+ /* set ECC page size and oob layout */
-+ switch (mtd->writesize) {
-+ case 512:
-+ nand_chip->ecc.layout = &at91_oobinfo_small;
-+ nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-+ nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_528);
-+ break;
-+ case 1024:
-+ nand_chip->ecc.layout = &at91_oobinfo_large;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_1056);
-+ break;
-+ case 2048:
-+ nand_chip->ecc.layout = &at91_oobinfo_large;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_2112);
-+ break;
-+ case 4096:
-+ nand_chip->ecc.layout = &at91_oobinfo_large;
-+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_4224);
-+ break;
-+ default:
-+ /*
-+ * Page size not supported by HW ECC.
-+ * So switch back to soft ECC
-+ */
-+ nand_chip->ecc.mode = NAND_ECC_SOFT;
-+ nand_chip->ecc.calculate = NULL;
-+ nand_chip->ecc.correct = NULL;
-+ nand_chip->ecc.hwctl = NULL;
-+ nand_chip->ecc.read_page = NULL;
-+ nand_chip->ecc.postpad = 0;
-+ nand_chip->ecc.prepad = 0;
-+ nand_chip->ecc.bytes = 0;
-+ break;
-+ }
-+ }
-+
-+ printk(KERN_INFO "AT91 NAND: %i-bit, %s ECC\n",
-+ (nand_chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+ ecc_modes[nand_chip->ecc.mode]
-+ );
-+
-+ /* second phase scan */
-+ if (nand_scan_tail(mtd)) {
- res = -ENXIO;
- goto out;
- }
-
- #ifdef CONFIG_MTD_PARTITIONS
-- if (host->board->partition_info)
-- partitions = host->board->partition_info(mtd->size, &num_partitions);
- #ifdef CONFIG_MTD_CMDLINE_PARTS
-- else {
-- mtd->name = "at91_nand";
-- num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-- }
-+ mtd->name = "at91_nand";
-+ num_partitions = parse_mtd_partitions(mtd, part_probes,
-+ &partitions, 0);
- #endif
-+ if (num_partitions <= 0 && host->board->partition_info)
-+ partitions = host->board->partition_info(mtd->size,
-+ &num_partitions);
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-@@ -179,8 +559,11 @@
- if (!res)
- return res;
-
-+#ifdef CONFIG_MTD_PARTITIONS
- release:
-+#endif
- nand_release(mtd);
-+
- out:
- at91_nand_disable(host);
- platform_set_drvdata(pdev, NULL);
-@@ -192,7 +575,7 @@
- /*
- * Remove a NAND device.
- */
--static int __devexit at91_nand_remove(struct platform_device *pdev)
-+static int __exit at91_nand_remove(struct platform_device *pdev)
- {
- struct at91_nand_host *host = platform_get_drvdata(pdev);
- struct mtd_info *mtd = &host->mtd;
-@@ -208,8 +591,7 @@
- }
-
- static struct platform_driver at91_nand_driver = {
-- .probe = at91_nand_probe,
-- .remove = at91_nand_remove,
-+ .remove = __exit_p(at91_nand_remove),
- .driver = {
- .name = "at91_nand",
- .owner = THIS_MODULE,
-@@ -218,7 +600,7 @@
-
- static int __init at91_nand_init(void)
- {
-- return platform_driver_register(&at91_nand_driver);
-+ return platform_driver_probe(&at91_nand_driver, at91_nand_probe);
- }
-
-
-@@ -233,4 +615,4 @@
-
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Rick Bronson");
--MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
-+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
-diff -urN -x CVS linux-2.6.24/drivers/net/Kconfig linux-2.6/drivers/net/Kconfig
---- linux-2.6.24/drivers/net/Kconfig 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/net/Kconfig 2008-02-18 22:56:04.000000000 +0200
-@@ -212,7 +212,7 @@
-
- config MACB
- tristate "Atmel MACB support"
-- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
-+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
- select PHYLIB
- help
- The Atmel MACB ethernet interface is found on many AT32 and AT91
-diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c
---- linux-2.6.24/drivers/net/arm/at91_ether.c 2008-03-01 22:02:12.000000000 +0200
-+++ linux-2.6/drivers/net/arm/at91_ether.c 2008-03-04 22:17:26.000000000 +0200
-@@ -220,7 +220,7 @@
- if (!(phy & (1 << 0)))
- goto done;
- }
-- else if (lp->phy_type == MII_KS8721_ID) {
-+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {
- read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
- if (!(phy & ((1 << 2) | 1)))
- goto done;
-@@ -286,7 +286,7 @@
- dsintr = (1 << 15) | ( 1 << 14);
- write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
-- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
-+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
- dsintr = (1 << 10) | ( 1 << 8);
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- }
-@@ -341,7 +341,7 @@
- dsintr = ~(1 << 14);
- write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
-- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
-+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
- read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
- dsintr = ~((1 << 10) | (1 << 8));
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
-@@ -384,7 +384,7 @@
- /* Wait until PHY reset is complete */
- do {
- read_phy(lp->phy_address, MII_BMCR, &bmcr);
-- } while (!(bmcr && BMCR_RESET));
-+ } while (!(bmcr & BMCR_RESET));
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-@@ -978,15 +978,22 @@
- struct net_device *dev;
- struct at91_private *lp;
- unsigned int val;
-- int res;
-+ struct resource *res;
-+ int ret;
- DECLARE_MAC_BUF(mac);
-
- dev = alloc_etherdev(sizeof(struct at91_private));
- if (!dev)
- return -ENOMEM;
-
-- dev->base_addr = AT91_VA_BASE_EMAC;
-- dev->irq = AT91RM9200_ID_EMAC;
-+ /* Get I/O base address and IRQ */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ free_netdev(dev);
-+ return -ENODEV;
-+ }
-+ dev->base_addr = res->start;
-+ dev->irq = platform_get_irq(pdev, 0);
-
- /* Install the interrupt handler */
- if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
-@@ -1043,7 +1050,9 @@
- } else if (machine_is_csb337()) {
- /* mix link activity status into LED2 link state */
- write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
-- }
-+ } else if (machine_is_ecbat91())
-+ write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
-+
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
-@@ -1058,12 +1067,12 @@
- lp->phy_address = phy_address; /* MDI address of PHY */
-
- /* Register the network interface */
-- res = register_netdev(dev);
-- if (res) {
-+ ret = register_netdev(dev);
-+ if (ret) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-- return res;
-+ return ret;
- }
-
- /* Determine current link speed */
-@@ -1101,6 +1110,8 @@
- printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- else if (phy_type == MII_AC101L_ID)
- printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
-+ else if (phy_type == MII_KSZ8041_ID)
-+ printk(KERN_INFO "%s: Micrel KSZ8041 PHY\n", dev->name);
- else if (phy_type == MII_KS8721_ID)
- printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
- else if (phy_type == MII_T78Q21x3_ID)
-@@ -1146,6 +1157,7 @@
- case MII_DP83847_ID: /* National Semiconductor DP83847: */
- case MII_DP83848_ID: /* National Semiconductor DP83848: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
-+ case MII_KSZ8041_ID: /* Micrel KSZ8041: PHY_ID1 = 0x22, PHY_ID2 = 0x1512 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
- case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
-diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h
---- linux-2.6.24/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/at91_ether.h 2008-01-01 15:13:39.000000000 +0200
-@@ -48,6 +48,9 @@
- /* Altima AC101L PHY */
- #define MII_AC101L_ID 0x00225520
-
-+/* Micrel KSZ8041 PHY */
-+#define MII_KSZ8041_ID 0x00221510
-+
- /* Micrel KS8721 PHY */
- #define MII_KS8721_ID 0x00221610
-
-diff -urN -x CVS linux-2.6.24/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig
---- linux-2.6.24/drivers/rtc/Kconfig 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/rtc/Kconfig 2008-02-24 18:13:06.000000000 +0200
-@@ -440,10 +440,47 @@
- AT32AP700x family processors.
-
- config RTC_DRV_AT91RM9200
-- tristate "AT91RM9200"
-- depends on ARCH_AT91RM9200
-+ tristate "AT91RM9200 or AT91SAM9RL"
-+ depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
- help
-- Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock).
-+ Driver for the internal RTC (Realtime Clock) module found on
-+ Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
-+ this is powered by the backup power supply.
-+
-+config RTC_DRV_AT91SAM9
-+ tristate "AT91SAM9x"
-+ depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
-+ help
-+ RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
-+ These timers are powered by the backup power supply (such as a
-+ small coin cell battery), but do not need to be used as RTCs.
-+
-+ (On AT91SAM9rl chips you probably want to use the dedicated RTC
-+ module and leave the RTT available for other uses.)
-+
-+config RTC_DRV_AT91SAM9_RTT
-+ int
-+ range 0 1
-+ default 0
-+ prompt "RTT module Number" if ARCH_AT91SAM9263
-+ depends on RTC_DRV_AT91SAM9
-+ help
-+ More than one RTT module is available. You can choose which
-+ one will be used as an RTC. The default of zero is normally
-+ OK to use, though some systems use that for non-RTC purposes.
-+
-+config RTC_DRV_AT91SAM9_GPBR
-+ int
-+ range 0 3 if !ARCH_AT91SAM9263
-+ range 0 15 if ARCH_AT91SAM9263
-+ default 0
-+ prompt "Backup Register Number"
-+ depends on RTC_DRV_AT91SAM9
-+ help
-+ The RTC driver needs to use one of the General Purpose Backup
-+ Registers (GPBRs) as well as the RTT. You can choose which one
-+ will be used. The default of zero is normally OK to use, but
-+ on some systems other software needs to use that register.
-
- config RTC_DRV_BFIN
- tristate "Blackfin On-Chip RTC"
-diff -urN -x CVS linux-2.6.24/drivers/rtc/Makefile linux-2.6/drivers/rtc/Makefile
---- linux-2.6.24/drivers/rtc/Makefile 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/rtc/Makefile 2007-12-31 10:44:31.000000000 +0200
-@@ -19,6 +19,7 @@
-
- obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
-+obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
- obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
- obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
-diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c
---- linux-2.6.24/drivers/rtc/rtc-at91rm9200.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-02-25 22:32:47.000000000 +0200
-@@ -307,12 +307,6 @@
- return ret;
- }
-
-- /* cpu init code should really have flagged this device as
-- * being wake-capable; if it didn't, do that here.
-- */
-- if (!device_can_wakeup(&pdev->dev))
-- device_init_wakeup(&pdev->dev, 1);
--
- rtc = rtc_device_register(pdev->name, &pdev->dev,
- &at91_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
-diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c
---- linux-2.6.24/drivers/rtc/rtc-at91sam9.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-03-01 21:54:39.000000000 +0200
-@@ -0,0 +1,526 @@
-+/*
-+ * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
-+ *
-+ * (C) 2007 Michel Benoit
-+ *
-+ * Based on rtc-at91rm9200.c by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/time.h>
-+#include <linux/rtc.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioctl.h>
-+
-+#include <asm/mach/time.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/at91_rtt.h>
-+
-+
-+/*
-+ * This driver uses two configurable hardware resources that live in the
-+ * AT91SAM9 backup power domain (intended to be powered at all times)
-+ * to implement the Real Time Clock interfaces
-+ *
-+ * - A "Real-time Timer" (RTT) counts up in seconds from a base time.
-+ * We can't assign the counter value (CRTV) ... but we can reset it.
-+ *
-+ * - One of the "General Purpose Backup Registers" (GPBRs) holds the
-+ * base time, normally an offset from the beginning of the POSIX
-+ * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
-+ * local timezone's offset.
-+ *
-+ * The RTC's value is the RTT counter plus that offset. The RTC's alarm
-+ * is likewise a base (ALMV) plus that offset.
-+ *
-+ * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
-+ * choose from, or a "real" RTC module. All systems have multiple GPBR
-+ * registers available, likewise usable for more than "RTC" support.
-+ */
-+
-+/*
-+ * We store ALARM_DISABLED in ALMV to record that no alarm is set.
-+ * It's also the reset value for that field.
-+ */
-+#define ALARM_DISABLED ((u32)~0)
-+
-+
-+struct sam9_rtc {
-+ void __iomem *rtt;
-+ struct rtc_device *rtcdev;
-+ u32 imr;
-+};
-+
-+#define rtt_readl(rtc, field) \
-+ __raw_readl((rtc)->rtt + AT91_RTT_ ## field)
-+#define rtt_writel(rtc, field, val) \
-+ __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
-+
-+#define gpbr_readl(rtc) \
-+ at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR)
-+#define gpbr_writel(rtc, val) \
-+ at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val))
-+
-+/*
-+ * Read current time and date in RTC
-+ */
-+static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
-+{
-+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
-+ u32 secs, secs2;
-+ u32 offset;
-+
-+ /* read current time offset */
-+ offset = gpbr_readl(rtc);
-+ if (offset == 0)
-+ return -EILSEQ;
-+
-+ /* reread the counter to help sync the two clock domains */
-+ secs = rtt_readl(rtc, VR);
-+ secs2 = rtt_readl(rtc, VR);
-+ if (secs != secs2)
-+ secs = rtt_readl(rtc, VR);
-+
-+ rtc_time_to_tm(offset + secs, tm);
-+
-+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
-+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Set current time and date in RTC
-+ */
-+static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
-+{
-+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
-+ int err;
-+ u32 offset, alarm, mr;
-+ unsigned long secs;
-+
-+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
-+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+
-+ err = rtc_tm_to_time(tm, &secs);
-+ if (err != 0)
-+ return err;
-+
-+ mr = rtt_readl(rtc, MR);
-+
-+ /* disable interrupts */
-+ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
-+
-+ /* read current time offset */
-+ offset = gpbr_readl(rtc);
-+
-+ /* store the new base time in a battery backup register */
-+ secs += 1;
-+ gpbr_writel(rtc, secs);
-+
-+ /* adjust the alarm time for the new base */
-+ alarm = rtt_readl(rtc, AR);
-+ if (alarm != ALARM_DISABLED) {
-+ if (offset > secs) {
-+ /* time jumped backwards, increase time until alarm */
-+ alarm += (offset - secs);
-+ } else if ((alarm + offset) > secs) {
-+ /* time jumped forwards, decrease time until alarm */
-+ alarm -= (secs - offset);
-+ } else {
-+ /* time jumped past the alarm, disable alarm */
-+ alarm = ALARM_DISABLED;
-+ mr &= ~AT91_RTT_ALMIEN;
-+ }
-+ rtt_writel(rtc, AR, alarm);
-+ }
-+
-+ /* reset the timer, and re-enable interrupts */
-+ rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read alarm time and date in RTC
-+ */
-+static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
-+ struct rtc_time *tm = &alrm->time;
-+ u32 alarm = rtt_readl(rtc, AR);
-+ u32 offset;
-+
-+ offset = gpbr_readl(rtc);
-+ if (offset == 0)
-+ return -EILSEQ;
-+
-+ memset(alrm, 0, sizeof(alrm));
-+ if (alarm != ALARM_DISABLED && offset != 0) {
-+ rtc_time_to_tm(offset + alarm, tm);
-+
-+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
-+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+
-+ if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
-+ alrm->enabled = 1;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * Set alarm time and date in RTC
-+ */
-+static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
-+ struct rtc_time *tm = &alrm->time;
-+ unsigned long secs;
-+ u32 offset;
-+ u32 mr;
-+ int err;
-+
-+ err = rtc_tm_to_time(tm, &secs);
-+ if (err != 0)
-+ return err;
-+
-+ offset = gpbr_readl(rtc);
-+ if (offset == 0) {
-+ /* time is not set */
-+ return -EILSEQ;
-+ }
-+ mr = rtt_readl(rtc, MR);
-+ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
-+
-+ /* alarm in the past? finish and leave disabled */
-+ if (secs <= offset) {
-+ rtt_writel(rtc, AR, ALARM_DISABLED);
-+ return 0;
-+ }
-+
-+ /* else set alarm and maybe enable it */
-+ rtt_writel(rtc, AR, secs - offset);
-+ if (alrm->enabled)
-+ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
-+
-+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
-+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
-+ tm->tm_min, tm->tm_sec);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Handle commands from user-space
-+ */
-+static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
-+ int ret = 0;
-+ u32 mr = rtt_readl(rtc, MR);
-+
-+ dev_dbg(dev, "ioctl: cmd=%08x, arg=%08lx, mr %08x\n", cmd, arg, mr);
-+
-+ switch (cmd) {
-+ case RTC_AIE_OFF: /* alarm off */
-+ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
-+ break;
-+ case RTC_AIE_ON: /* alarm on */
-+ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
-+ break;
-+ case RTC_UIE_OFF: /* update off */
-+ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
-+ break;
-+ case RTC_UIE_ON: /* update on */
-+ rtt_writel(rtc, MR, mr | AT91_RTT_RTTINCIEN);
-+ break;
-+ default:
-+ ret = -ENOIOCTLCMD;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+/*
-+ * Provide additional RTC information in /proc/driver/rtc
-+ */
-+static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
-+ u32 mr = mr = rtt_readl(rtc, MR);
-+
-+ seq_printf(seq, "update_IRQ\t: %s\n",
-+ (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
-+ return 0;
-+}
-+
-+/*
-+ * IRQ handler for the RTC
-+ */
-+static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
-+{
-+ struct sam9_rtc *rtc = _rtc;
-+ u32 sr, mr;
-+ unsigned long events = 0;
-+
-+ /* Shared interrupt may be for another device. Note: reading
-+ * SR clears it, so we must only read it in this irq handler!
-+ */
-+ mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
-+ sr = rtt_readl(rtc, SR) & mr;
-+ if (!sr)
-+ return IRQ_NONE;
-+
-+ /* alarm status */
-+ if (sr & AT91_RTT_ALMS)
-+ events |= (RTC_AF | RTC_IRQF);
-+
-+ /* timer update/increment */
-+ if (sr & AT91_RTT_RTTINC)
-+ events |= (RTC_UF | RTC_IRQF);
-+
-+ rtc_update_irq(rtc->rtcdev, 1, events);
-+
-+ pr_debug("%s: num=%ld, events=0x%02lx\n", __FUNCTION__,
-+ events >> 8, events & 0x000000FF);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static const struct rtc_class_ops at91_rtc_ops = {
-+ .ioctl = at91_rtc_ioctl,
-+ .read_time = at91_rtc_readtime,
-+ .set_time = at91_rtc_settime,
-+ .read_alarm = at91_rtc_readalarm,
-+ .set_alarm = at91_rtc_setalarm,
-+ .proc = at91_rtc_proc,
-+};
-+
-+/*
-+ * Initialize and install RTC driver
-+ */
-+static int __init at91_rtc_probe(struct platform_device *pdev)
-+{
-+ struct resource *r;
-+ struct sam9_rtc *rtc;
-+ int ret;
-+ u32 mr;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!r)
-+ return -ENODEV;
-+
-+ rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
-+ if (!rtc)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, rtc);
-+ rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
-+ rtc->rtt += r->start;
-+
-+ mr = rtt_readl(rtc, MR);
-+
-+ /* unless RTT is counting at 1 Hz, re-initialize it */
-+ if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
-+ mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
-+ gpbr_writel(rtc, 0);
-+ }
-+
-+ /* disable all interrupts (same as on shutdown path) */
-+ mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
-+ rtt_writel(rtc, MR, mr);
-+
-+ rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
-+ &at91_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc->rtcdev)) {
-+ ret = PTR_ERR(rtc->rtcdev);
-+ goto fail;
-+ }
-+
-+ /* register irq handler after we know what name we'll use */
-+ ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
-+ IRQF_DISABLED | IRQF_SHARED,
-+ rtc->rtcdev->dev.bus_id, rtc);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
-+ rtc_device_unregister(rtc->rtcdev);
-+ goto fail;
-+ }
-+
-+ /* NOTE: sam9260 rev A silicon has a ROM bug which resets the
-+ * RTT on at least some reboots. If you have that chip, you must
-+ * initialize the time from some external source like a GPS, wall
-+ * clock, discrete RTC, etc
-+ */
-+
-+ if (gpbr_readl(rtc) == 0)
-+ dev_warn(&pdev->dev, "%s: SET TIME!\n",
-+ rtc->rtcdev->dev.bus_id);
-+
-+ return 0;
-+
-+fail:
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(rtc);
-+ return ret;
-+}
-+
-+/*
-+ * Disable and remove the RTC driver
-+ */
-+static int __exit at91_rtc_remove(struct platform_device *pdev)
-+{
-+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
-+ u32 mr = rtt_readl(rtc, MR);
-+
-+ /* disable all interrupts */
-+ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
-+ free_irq(AT91_ID_SYS, rtc);
-+
-+ rtc_device_unregister(rtc->rtcdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(rtc);
-+ return 0;
-+}
-+
-+static void at91_rtc_shutdown(struct platform_device *pdev)
-+{
-+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
-+ u32 mr = rtt_readl(rtc, MR);
-+
-+ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
-+ rtt_writel(rtc, MR, mr & ~rtc->imr);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+/* AT91SAM9 RTC Power management control */
-+
-+static int at91_rtc_suspend(struct platform_device *pdev,
-+ pm_message_t state)
-+{
-+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
-+ u32 mr = rtt_readl(rtc, MR);
-+
-+ /*
-+ * This IRQ is shared with DBGU and other hardware which isn't
-+ * necessarily a wakeup event source.
-+ */
-+ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
-+ if (rtc->imr) {
-+ if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
-+ enable_irq_wake(AT91_ID_SYS);
-+ /* don't let RTTINC cause wakeups */
-+ if (mr & AT91_RTT_RTTINCIEN)
-+ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
-+ } else
-+ rtt_writel(rtc, MR, mr & ~rtc->imr);
-+ }
-+
-+ return 0;
-+}
-+
-+static int at91_rtc_resume(struct platform_device *pdev)
-+{
-+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
-+ u32 mr;
-+
-+ if (rtc->imr) {
-+ if (device_may_wakeup(&pdev->dev))
-+ disable_irq_wake(AT91_ID_SYS);
-+ mr = rtt_readl(rtc, MR);
-+ rtt_writel(rtc, MR, mr | rtc->imr);
-+ }
-+
-+ return 0;
-+}
-+#else
-+#define at91_rtc_suspend NULL
-+#define at91_rtc_resume NULL
-+#endif
-+
-+static struct platform_driver at91_rtc_driver = {
-+ .driver.name = "rtc-at91sam9",
-+ .driver.owner = THIS_MODULE,
-+ .remove = __exit_p(at91_rtc_remove),
-+ .shutdown = at91_rtc_shutdown,
-+ .suspend = at91_rtc_suspend,
-+ .resume = at91_rtc_resume,
-+};
-+
-+/* Chips can have more than one RTT module, and they can be used for more
-+ * than just RTCs. So we can't just register as "the" RTT driver.
-+ *
-+ * A normal approach in such cases is to create a library to allocate and
-+ * free the modules. Here we just use bus_find_device() as like such a
-+ * library, binding directly ... no runtime "library" footprint is needed.
-+ */
-+static int __init at91_rtc_match(struct device *dev, void *v)
-+{
-+ struct platform_device *pdev = to_platform_device(dev);
-+ int ret;
-+
-+ /* continue searching if this isn't the RTT we need */
-+ if (strcmp("at91_rtt", pdev->name) != 0
-+ || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT)
-+ goto fail;
-+
-+ /* else we found it ... but fail unless we can bind to the RTC driver */
-+ if (dev->driver) {
-+ dev_dbg(dev, "busy, can't use as RTC!\n");
-+ goto fail;
-+ }
-+ dev->driver = &at91_rtc_driver.driver;
-+ if (device_attach(dev) == 0) {
-+ dev_dbg(dev, "can't attach RTC!\n");
-+ goto fail;
-+ }
-+ ret = at91_rtc_probe(pdev);
-+ if (ret == 0)
-+ return true;
-+
-+ dev_dbg(dev, "RTC probe err %d!\n", ret);
-+fail:
-+ return false;
-+}
-+
-+static int __init at91_rtc_init(void)
-+{
-+ int status;
-+ struct device *rtc;
-+
-+ status = platform_driver_register(&at91_rtc_driver);
-+ if (status)
-+ return status;
-+ rtc = bus_find_device(&platform_bus_type, NULL,
-+ NULL, at91_rtc_match);
-+ if (!rtc)
-+ platform_driver_unregister(&at91_rtc_driver);
-+ return rtc ? 0 : -ENODEV;
-+}
-+module_init(at91_rtc_init);
-+
-+static void __exit at91_rtc_exit(void)
-+{
-+ platform_driver_unregister(&at91_rtc_driver);
-+}
-+module_exit(at91_rtc_exit);
-+
-+
-+MODULE_AUTHOR("Michel Benoit");
-+MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.c linux-2.6/drivers/serial/atmel_serial.c
---- linux-2.6.24/drivers/serial/atmel_serial.c 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/serial/atmel_serial.c 2008-02-24 19:02:50.000000000 +0200
-@@ -7,6 +7,8 @@
- * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
-+ * DMA support added by Chip Coldwell.
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -33,7 +35,9 @@
- #include <linux/sysrq.h>
- #include <linux/tty_flip.h>
- #include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
- #include <linux/atmel_pdc.h>
-+#include <linux/atmel_serial.h>
-
- #include <asm/io.h>
-
-@@ -45,7 +49,10 @@
- #include <asm/arch/gpio.h>
- #endif
-
--#include "atmel_serial.h"
-+#define SUPPORT_PDC
-+#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
-+#warning "Revisit"
-+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
-
- #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
- #define SUPPORT_SYSRQ
-@@ -107,6 +114,13 @@
- static int (*atmel_open_hook)(struct uart_port *);
- static void (*atmel_close_hook)(struct uart_port *);
-
-+struct atmel_dma_buffer {
-+ unsigned char *buf;
-+ dma_addr_t dma_addr;
-+ size_t dma_size;
-+ unsigned int ofs;
-+};
-+
- /*
- * We wrap our port structure around the generic uart_port.
- */
-@@ -115,10 +129,20 @@
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
- int break_active; /* break being received */
-+
-+ short use_dma_rx; /* enable PDC receiver */
-+ short pdc_rx_idx; /* current PDC RX buffer */
-+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
-+
-+ short use_dma_tx; /* enable PDC transmitter */
-+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-
-+#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
-+#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
-+
- #ifdef SUPPORT_SYSRQ
- static struct console atmel_console;
- #endif
-@@ -204,7 +228,14 @@
- */
- static void atmel_stop_tx(struct uart_port *port)
- {
-- UART_PUT_IDR(port, ATMEL_US_TXRDY);
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+
-+ if (atmel_port->use_dma_tx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -212,7 +243,19 @@
- */
- static void atmel_start_tx(struct uart_port *port)
- {
-- UART_PUT_IER(port, ATMEL_US_TXRDY);
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+
-+ if (atmel_port->use_dma_tx) {
-+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
-+ /* The transmitter is already running. Yes, we
-+ really need this.*/
-+ return;
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -220,7 +263,14 @@
- */
- static void atmel_stop_rx(struct uart_port *port)
- {
-- UART_PUT_IDR(port, ATMEL_US_RXRDY);
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
-+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
- }
-
- /*
-@@ -243,6 +293,134 @@
- }
-
- /*
-+ * Receive data via the PDC. A buffer has been fulled.
-+ */
-+static void atmel_pdc_endrx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ unsigned int count;
-+
-+ count = pdc->dma_size - pdc->ofs;
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ port->icount.rx += count;
-+ }
-+
-+ /* Set this buffer as the next receive buffer */
-+ pdc->ofs = 0;
-+ UART_PUT_RNPR(port, pdc->dma_addr);
-+ UART_PUT_RNCR(port, pdc->dma_size);
-+
-+ /* Switch to next buffer */
-+ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
-+}
-+
-+/*
-+ * Receive data via the PDC. At least one byte was received, but the
-+ * buffer was not full when the inter-character timeout expired.
-+ */
-+static void atmel_pdc_timeout(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ /* unsigned */ int ofs, count;
-+
-+ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
-+ count = ofs - pdc->ofs;
-+
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ pdc->ofs = ofs;
-+ port->icount.rx += count;
-+ }
-+
-+ /* reset the UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+}
-+
-+/*
-+ * Deal with parity, framing and overrun errors.
-+ */
-+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
-+{
-+ /* clear error */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+
-+ if (status & ATMEL_US_RXBRK) {
-+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
-+ port->icount.brk++;
-+ }
-+ if (status & ATMEL_US_PARE)
-+ port->icount.parity++;
-+ if (status & ATMEL_US_FRAME)
-+ port->icount.frame++;
-+ if (status & ATMEL_US_OVRE)
-+ port->icount.overrun++;
-+}
-+
-+/*
-+ * A transmission via the PDC is complete.
-+ */
-+static void atmel_pdc_endtx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ xmit->tail += pdc->ofs;
-+ if (xmit->tail >= SERIAL_XMIT_SIZE)
-+ xmit->tail -= SERIAL_XMIT_SIZE;
-+
-+ port->icount.tx += pdc->ofs;
-+ pdc->ofs = 0;
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+}
-+
-+/*
-+ * The PDC transmitter is idle, so either start the next transfer or
-+ * disable the transmitter.
-+ */
-+static void atmel_pdc_txbufe(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ int count;
-+
-+ if (!uart_circ_empty(xmit)) {
-+ /* more to transmit - setup next transfer */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+
-+ if (xmit->tail < xmit->head)
-+ count = xmit->head - xmit->tail;
-+ else
-+ count = SERIAL_XMIT_SIZE - xmit->tail;
-+ pdc->ofs = count;
-+
-+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
-+ UART_PUT_TCR(port, count);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else {
-+ /* nothing left to transmit - disable the transmitter */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+}
-+
-+/*
- * Characters received (called from interrupt handler)
- */
- static void atmel_rx_chars(struct uart_port *port)
-@@ -361,6 +539,14 @@
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- while (pending) {
-+ /* PDC receive */
-+ if (pending & ATMEL_US_ENDRX)
-+ atmel_pdc_endrx(port);
-+ if (pending & ATMEL_US_TIMEOUT)
-+ atmel_pdc_timeout(port);
-+ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
-+ atmel_pdc_rxerr(port, pending);
-+
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-@@ -385,6 +571,12 @@
- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
-
-+ /* PDC transmit */
-+ if (pending & ATMEL_US_ENDTX)
-+ atmel_pdc_endtx(port);
-+ if (pending & ATMEL_US_TXBUFE)
-+ atmel_pdc_txbufe(port);
-+
- /* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY)
- atmel_tx_chars(port);
-@@ -403,6 +595,7 @@
- */
- static int atmel_startup(struct uart_port *port)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- int retval;
-
- /*
-@@ -422,6 +615,47 @@
- }
-
- /*
-+ * Initialize DMA (if necessary)
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
-+ if (pdc->buf == NULL) {
-+ if (i != 0) {
-+ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ kfree(atmel_port->pdc_rx[0].buf);
-+ }
-+ free_irq(port->irq, port);
-+ return -ENOMEM;
-+ }
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ pdc->dma_size = PDC_BUFFER_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ atmel_port->pdc_rx_idx = 0;
-+
-+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
-+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
-+
-+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
-+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ struct circ_buf *xmit = &port->info->xmit;
-+
-+ pdc->buf = xmit->buf;
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
-+ pdc->dma_size = SERIAL_XMIT_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
-@@ -439,7 +673,15 @@
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
-
-- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-
- return 0;
- }
-@@ -449,6 +691,33 @@
- */
- static void atmel_shutdown(struct uart_port *port)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+
-+ /*
-+ * Ensure everything is stopped.
-+ */
-+ atmel_stop_rx(port);
-+ atmel_stop_tx(port);
-+
-+ /*
-+ * Shut-down the DMA.
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ kfree(pdc->buf);
-+ }
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+ }
-+
- /*
- * Disable all interrupts, port and break condition.
- */
-@@ -500,6 +769,7 @@
- */
- static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
-@@ -509,7 +779,7 @@
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
-- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
-+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
- quot /= 8;
- mode |= ATMEL_US_USCLKS_MCK_DIV8;
- }
-@@ -558,6 +828,9 @@
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= ATMEL_US_RXBRK;
-
-+ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
-+ UART_PUT_IER(port, port->read_status_mask);
-+
- /*
- * Characters to ignore
- */
-@@ -582,7 +855,8 @@
- /* disable interrupts and drain transmitter */
- imr = UART_GET_IMR(port); /* get interrupt mask */
- UART_PUT_IDR(port, -1); /* disable all interrupts */
-- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
-+ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
-+ cpu_relax();
-
- /* disable receiver and transmitter */
- UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
-@@ -736,6 +1010,13 @@
- clk_enable(atmel_port->clk);
- port->uartclk = clk_get_rate(atmel_port->clk);
- }
-+
-+#ifdef SUPPORT_PDC
-+ atmel_port->use_dma_rx = data->use_dma_rx;
-+ atmel_port->use_dma_tx = data->use_dma_tx;
-+ if (atmel_port->use_dma_tx)
-+ port->fifosize = PDC_BUFFER_SIZE;
-+#endif
- }
-
- /*
-@@ -760,7 +1041,7 @@
- static void atmel_console_putchar(struct uart_port *port, int ch)
- {
- while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
-- barrier();
-+ cpu_relax();
- UART_PUT_CHAR(port, ch);
- }
-
-@@ -798,13 +1079,13 @@
- {
- unsigned int mr, quot;
-
--// TODO: CR is a write-only register
--// unsigned int cr;
--//
--// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
--// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
--// /* ok, the port was enabled */
--// }
-+ /*
-+ * If the baud rate generator isn't running, the port wasn't
-+ * initialized by the boot loader.
-+ */
-+ quot = UART_GET_BRGR(port);
-+ if (!quot)
-+ return;
-
- mr = UART_GET_MR(port) & ATMEL_US_CHRL;
- if (mr == ATMEL_US_CHRL_8)
-@@ -824,7 +1105,6 @@
- * lower than one of those, as it would make us fall through
- * to a much lower baud rate than we really want.
- */
-- quot = UART_GET_BRGR(port);
- *baud = port->uartclk / (16 * (quot - 1));
- }
-
-@@ -912,7 +1192,8 @@
- struct uart_port *port = platform_get_drvdata(pdev);
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
-+ if (device_may_wakeup(&pdev->dev)
-+ && !clk_must_disable(atmel_port->clk))
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
-diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.h linux-2.6/drivers/serial/atmel_serial.h
---- linux-2.6.24/drivers/serial/atmel_serial.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/serial/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200
-@@ -1,127 +0,0 @@
--/*
-- * drivers/serial/atmel_serial.h
-- *
-- * Copyright (C) 2005 Ivan Kokshaysky
-- * Copyright (C) SAN People
-- *
-- * USART registers.
-- * Based on AT91RM9200 datasheet revision E.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef ATMEL_SERIAL_H
--#define ATMEL_SERIAL_H
--
--#define ATMEL_US_CR 0x00 /* Control Register */
--#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
--#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
--#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
--#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
--#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
--#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
--#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
--#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
--#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
--#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
--#define ATMEL_US_SENDA (1 << 12) /* Send Address */
--#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
--#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
--#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
--#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
--#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
--#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
--#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
--
--#define ATMEL_US_MR 0x04 /* Mode Register */
--#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
--#define ATMEL_US_USMODE_NORMAL 0
--#define ATMEL_US_USMODE_RS485 1
--#define ATMEL_US_USMODE_HWHS 2
--#define ATMEL_US_USMODE_MODEM 3
--#define ATMEL_US_USMODE_ISO7816_T0 4
--#define ATMEL_US_USMODE_ISO7816_T1 6
--#define ATMEL_US_USMODE_IRDA 8
--#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
--#define ATMEL_US_USCLKS_MCK (0 << 4)
--#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
--#define ATMEL_US_USCLKS_SCK (3 << 4)
--#define ATMEL_US_CHRL (3 << 6) /* Character Length */
--#define ATMEL_US_CHRL_5 (0 << 6)
--#define ATMEL_US_CHRL_6 (1 << 6)
--#define ATMEL_US_CHRL_7 (2 << 6)
--#define ATMEL_US_CHRL_8 (3 << 6)
--#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
--#define ATMEL_US_PAR (7 << 9) /* Parity Type */
--#define ATMEL_US_PAR_EVEN (0 << 9)
--#define ATMEL_US_PAR_ODD (1 << 9)
--#define ATMEL_US_PAR_SPACE (2 << 9)
--#define ATMEL_US_PAR_MARK (3 << 9)
--#define ATMEL_US_PAR_NONE (4 << 9)
--#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
--#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
--#define ATMEL_US_NBSTOP_1 (0 << 12)
--#define ATMEL_US_NBSTOP_1_5 (1 << 12)
--#define ATMEL_US_NBSTOP_2 (2 << 12)
--#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
--#define ATMEL_US_CHMODE_NORMAL (0 << 14)
--#define ATMEL_US_CHMODE_ECHO (1 << 14)
--#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
--#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
--#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
--#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
--#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
--#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
--#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
--#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
--#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
--#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
--
--#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
--#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
--#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
--#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
--#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
--#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
--#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
--#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
--#define ATMEL_US_PARE (1 << 7) /* Parity Error */
--#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
--#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
--#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
--#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
--#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
--#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
--#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
--#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
--#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
--#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
--#define ATMEL_US_RI (1 << 20) /* RI */
--#define ATMEL_US_DSR (1 << 21) /* DSR */
--#define ATMEL_US_DCD (1 << 22) /* DCD */
--#define ATMEL_US_CTS (1 << 23) /* CTS */
--
--#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
--#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
--#define ATMEL_US_CSR 0x14 /* Channel Status Register */
--#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
--#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
--#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
--
--#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
--#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
--
--#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
--#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
--
--#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
--#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
--
--#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
--#define ATMEL_US_NER 0x44 /* Number of Errors Register */
--#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
--
--#endif
-diff -urN -x CVS linux-2.6.24/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig
---- linux-2.6.24/drivers/spi/Kconfig 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/spi/Kconfig 2007-12-31 10:44:31.000000000 +0200
-@@ -100,6 +100,15 @@
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
-
-+config SPI_AT91
-+ tristate "AT91RM9200 Bitbang SPI Master"
-+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+ select SPI_BITBANG
-+ help
-+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+ The SPI_ATMEL driver will be its replacement, using the native
-+ SPI hardware and its DMA controller.
-+
- config SPI_IMX
- tristate "Freescale iMX SPI controller"
- depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN -x CVS linux-2.6.24/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile
---- linux-2.6.24/drivers/spi/Makefile 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/spi/Makefile 2007-12-31 10:44:31.000000000 +0200
-@@ -27,6 +27,7 @@
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
-+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
-diff -urN -x CVS linux-2.6.24/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.24/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2007-12-31 15:18:43.000000000 +0200
-@@ -0,0 +1,207 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ * - other at91 parts (like at91sam9) have multiple controllers
-+ * and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ * - rm9200 spi chipselects drop wrongly, so the native driver
-+ * will need to use gpios much like this does.
-+ *
-+ * - real hardware only allows 8..16 bits per word, while this
-+ * bitbanger allows 1..32 (incompatible superset).
-+ *
-+ * - this disregards clock parameters. with inlined gpio calls,
-+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ * than using the subroutined veresion from txrx_word().
-+ *
-+ * - suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define spi_miso_bit AT91_PIN_PA0
-+#define spi_mosi_bit AT91_PIN_PA1
-+#define spi_sck_bit AT91_PIN_PA2
-+
-+struct at91_spi {
-+ struct spi_bitbang bitbang;
-+ struct platform_device *pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+ return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+ unsigned long cs = (unsigned long) spi->controller_data;
-+
-+ /* set default clock polarity */
-+ if (is_active)
-+ setsck(spi, spi->mode & SPI_CPOL);
-+
-+ /* only support active-low (default) */
-+ at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE: this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define spidelay(X) do{} while(0)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct spi_master *master;
-+ struct at91_spi *at91_spi;
-+
-+ if (pdev->id != 0) /* SPI0 bus */
-+ return -EINVAL;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+ if (!master)
-+ return -ENOMEM;
-+
-+ at91_spi = spi_master_get_devdata(master);
-+ at91_spi->pdev = pdev;
-+ platform_set_drvdata(pdev, at91_spi);
-+
-+ /* SPI and bitbang hookup */
-+ master->bus_num = 0;
-+ master->num_chipselect = 4;
-+
-+ at91_spi->bitbang.master = spi_master_get(master);
-+ at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+ status = spi_bitbang_start(&at91_spi->bitbang);
-+ if (status < 0)
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
-+ int status;
-+
-+ /* stop() unregisters child devices too */
-+ status = spi_bitbang_stop(&at91_spi->bitbang);
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+ .probe = at91_spi_probe,
-+ .remove = __exit_p(at91_spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+ at91_set_gpio_output(spi_sck_bit, 0);
-+ at91_set_gpio_output(spi_mosi_bit, 0);
-+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+ /* register driver */
-+ return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+ platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig
---- linux-2.6.24/drivers/usb/gadget/Kconfig 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/Kconfig 2008-01-16 20:26:55.000000000 +0200
-@@ -308,7 +308,7 @@
-
- config USB_GADGET_AT91
- boolean "AT91 USB Device Port"
-- depends on ARCH_AT91 && !ARCH_AT91SAM9RL
-+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
- select USB_GADGET_SELECTED
- help
- Many Atmel AT91 processors (such as the AT91RM2000) have a
-diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c
---- linux-2.6.24/drivers/usb/gadget/at91_udc.c 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/at91_udc.c 2007-12-31 10:44:31.000000000 +0200
-@@ -1784,7 +1784,7 @@
- */
- if ((!udc->suspended && udc->addr)
- || !wake
-- || at91_suspend_entering_slow_clock()) {
-+ || clk_must_disable(udc->fclk)) {
- pullup(udc, 0);
- wake = 0;
- } else
-diff -urN -x CVS linux-2.6.24/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c
---- linux-2.6.24/drivers/usb/host/ohci-at91.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/usb/host/ohci-at91.c 2007-12-31 14:05:15.000000000 +0200
-@@ -299,7 +299,7 @@
- *
- * REVISIT: some boards will be able to turn VBUS off...
- */
-- if (at91_suspend_entering_slow_clock()) {
-+ if (clk_must_disable(fclk)) {
- ohci_usb_reset (ohci);
- at91_stop_clock();
- }
-diff -urN -x CVS linux-2.6.24/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig
---- linux-2.6.24/drivers/video/Kconfig 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/video/Kconfig 2008-01-16 21:25:17.000000000 +0200
-@@ -876,6 +876,17 @@
- framebuffer. Product specs at
- <http://www.erd.epson.com/vdc/html/products.htm>.
-
-+config FB_S1D15605
-+ tristate "Epson S1D15605 framebuffer support"
-+ depends on FB
-+ default m if MACH_KB9200
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ Build in support for the S1D15605 Epson Research 128x64
-+ LCD controller as a framebuffer.
-+
- config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
-@@ -889,7 +900,7 @@
-
- config FB_ATMEL
- tristate "AT91/AT32 LCD Controller support"
-- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
-+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-diff -urN -x CVS linux-2.6.24/drivers/video/Makefile linux-2.6/drivers/video/Makefile
---- linux-2.6.24/drivers/video/Makefile 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/video/Makefile 2007-12-31 10:44:31.000000000 +0200
-@@ -87,7 +87,8 @@
- obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
--obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
-+obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN -x CVS linux-2.6.24/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c
---- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-03-01 22:02:13.000000000 +0200
-+++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-02-25 22:42:48.000000000 +0200
-@@ -16,6 +16,7 @@
- #include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/delay.h>
-+#include <linux/backlight.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
-@@ -30,7 +31,7 @@
- #define ATMEL_LCDC_CVAL_DEFAULT 0xc8
- #define ATMEL_LCDC_DMA_BURST_LEN 8
-
--#if defined(CONFIG_ARCH_AT91SAM9263)
-+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
- #define ATMEL_LCDC_FIFO_SIZE 2048
- #else
- #define ATMEL_LCDC_FIFO_SIZE 512
-@@ -69,6 +70,107 @@
- }
- #endif
-
-+static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
-+ | ATMEL_LCDC_POL_POSITIVE
-+ | ATMEL_LCDC_ENA_PWMENABLE;
-+
-+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
-+
-+/* some bl->props field just changed */
-+static int atmel_bl_update_status(struct backlight_device *bl)
-+{
-+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
-+ int power = sinfo->bl_power;
-+ int brightness = bl->props.brightness;
-+
-+ /* REVISIT there may be a meaningful difference between
-+ * fb_blank and power ... there seem to be some cases
-+ * this doesn't handle correctly.
-+ */
-+ if (bl->props.fb_blank != sinfo->bl_power)
-+ power = bl->props.fb_blank;
-+ else if (bl->props.power != sinfo->bl_power)
-+ power = bl->props.power;
-+
-+ if (brightness < 0 && power == FB_BLANK_UNBLANK)
-+ brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
-+ else if (power != FB_BLANK_UNBLANK)
-+ brightness = 0;
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
-+ brightness ? contrast_ctr : 0);
-+
-+ bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
-+
-+ return 0;
-+}
-+
-+static int atmel_bl_get_brightness(struct backlight_device *bl)
-+{
-+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
-+
-+ return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
-+}
-+
-+static struct backlight_ops atmel_lcdc_bl_ops = {
-+ .update_status = atmel_bl_update_status,
-+ .get_brightness = atmel_bl_get_brightness,
-+};
-+
-+static void init_backlight(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct backlight_device *bl;
-+
-+ sinfo->bl_power = FB_BLANK_UNBLANK;
-+
-+ if (sinfo->backlight)
-+ return;
-+
-+ bl = backlight_device_register("backlight", &sinfo->pdev->dev,
-+ sinfo, &atmel_lcdc_bl_ops);
-+ if (IS_ERR(sinfo->backlight)) {
-+ dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
-+ PTR_ERR(bl));
-+ return;
-+ }
-+ sinfo->backlight = bl;
-+
-+ bl->props.power = FB_BLANK_UNBLANK;
-+ bl->props.fb_blank = FB_BLANK_UNBLANK;
-+ bl->props.max_brightness = 0xff;
-+ bl->props.brightness = atmel_bl_get_brightness(bl);
-+}
-+
-+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
-+{
-+ if (sinfo->backlight)
-+ backlight_device_unregister(sinfo->backlight);
-+}
-+
-+#else
-+
-+static void init_backlight(struct atmel_lcdfb_info *sinfo)
-+{
-+ dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
-+}
-+
-+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
-+{
-+}
-+
-+#endif
-+
-+static void init_contrast(struct atmel_lcdfb_info *sinfo)
-+{
-+ /* have some default contrast/backlight settings */
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-+
-+ if (sinfo->lcdcon_is_backlight)
-+ init_backlight(sinfo);
-+}
-+
-
- static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- .type = FB_TYPE_PACKED_PIXELS,
-@@ -370,10 +472,6 @@
- /* Disable all interrupts */
- lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-
-- /* Set contrast */
-- value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
- /* ...wait for DMA engine to become idle... */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-@@ -577,6 +675,7 @@
- sinfo->default_monspecs = pdata_sinfo->default_monspecs;
- sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
- sinfo->guard_time = pdata_sinfo->guard_time;
-+ sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
- } else {
- dev_err(dev, "cannot get default configuration\n");
- goto free_info;
-@@ -670,6 +769,9 @@
- goto release_mem;
- }
-
-+ /* Initialize PWM for contrast or backlight ("off") */
-+ init_contrast(sinfo);
-+
- /* interrupt */
- ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
- if (ret) {
-@@ -721,6 +823,7 @@
- unregister_irqs:
- free_irq(sinfo->irq_base, info);
- unmap_mmio:
-+ exit_backlight(sinfo);
- iounmap(sinfo->mmio);
- release_mem:
- release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-@@ -755,6 +858,7 @@
- if (!sinfo)
- return 0;
-
-+ exit_backlight(sinfo);
- if (sinfo->atmel_lcdfb_power_control)
- sinfo->atmel_lcdfb_power_control(0);
- unregister_framebuffer(info);
-@@ -779,8 +883,45 @@
- return 0;
- }
-
-+#ifdef CONFIG_PM
-+
-+static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+ struct fb_info *info = platform_get_drvdata(pdev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+
-+ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(0);
-+ atmel_lcdfb_stop_clock(sinfo);
-+
-+ return 0;
-+}
-+
-+static int atmel_lcdfb_resume(struct platform_device *pdev)
-+{
-+ struct fb_info *info = platform_get_drvdata(pdev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+
-+ atmel_lcdfb_start_clock(sinfo);
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(1);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
-+
-+ return 0;
-+}
-+
-+#else
-+#define atmel_lcdfb_suspend NULL
-+#define atmel_lcdfb_resume NULL
-+#endif
-+
-+
- static struct platform_driver atmel_lcdfb_driver = {
- .remove = __exit_p(atmel_lcdfb_remove),
-+ .suspend = atmel_lcdfb_suspend,
-+ .resume = atmel_lcdfb_resume,
- .driver = {
- .name = "atmel_lcdfb",
- .owner = THIS_MODULE,
-diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig
---- linux-2.6.24/drivers/video/backlight/Kconfig 2008-03-01 22:02:14.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/Kconfig 2008-02-25 22:42:48.000000000 +0200
-@@ -50,6 +50,19 @@
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-
-+config BACKLIGHT_ATMEL_LCDC
-+ bool "Atmel LCDC Contrast-as-Backlight control"
-+ depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
-+ default y if MACH_SAM9261EK || MACH_SAM9263EK
-+ help
-+ This provides a backlight control internal to the Atmel LCDC
-+ driver. If the LCD "contrast control" on your board is wired
-+ so it controls the backlight brightness, select this option to
-+ export this as a PWM-based backlight control.
-+
-+ If in doubt, it's safe to enable this option; it doesn't kick
-+ in unless the board's description says it's wired that way.
-+
- config BACKLIGHT_CORGI
- tristate "Generic (aka Sharp Corgi) Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE
-@@ -90,3 +103,11 @@
- help
- If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
- backlight driver.
-+
-+config BACKLIGHT_KB920x
-+ tristate "KwikByte KB9202 Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
-+ default y
-+ help
-+ If you have a KwikByte KB9202 board, say Y to enable the
-+ backlight driver.
-diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile
---- linux-2.6.24/drivers/video/backlight/Makefile 2008-03-01 22:02:14.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/Makefile 2007-12-31 10:44:34.000000000 +0200
-@@ -9,3 +9,4 @@
- obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
- obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
-+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN -x CVS linux-2.6.24/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.24/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2007-12-31 10:44:34.000000000 +0200
-@@ -0,0 +1,164 @@
-+/*
-+ * Backlight Driver for KB9202
-+ *
-+ * Copyright (c) 2006 KwikByte
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+/* The backlight is on(1)/off(0) */
-+#define KB9202_DEFAULT_INTENSITY 1
-+#define KB9202_MAX_INTENSITY 1
-+
-+static int kb9202bl_suspended;
-+static int current_intensity = 0;
-+static DEFINE_SPINLOCK(bl_lock);
-+
-+static int kb9202bl_set_intensity(struct backlight_device *bd)
-+{
-+ unsigned long flags;
-+ int intensity = bd->props.brightness;
-+
-+ if (bd->props.power != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (kb9202bl_suspended)
-+ intensity = 0;
-+
-+ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
-+ intensity = 1;
-+
-+ spin_lock_irqsave(&bl_lock, flags);
-+ if (intensity)
-+ gpio_set_value(AT91_PIN_PC23, 1);
-+ else
-+ gpio_set_value(AT91_PIN_PC23, 0);
-+ spin_unlock_irqrestore(&bl_lock, flags);
-+
-+ current_intensity = intensity;
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_get_intensity(struct backlight_device *bd)
-+{
-+ return current_intensity;
-+}
-+
-+static struct backlight_ops kb9202bl_ops = {
-+ .get_brightness = kb9202bl_get_intensity,
-+ .update_status = kb9202bl_set_intensity,
-+};
-+
-+static int __init kb9202bl_probe(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd;
-+
-+ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
-+ if (IS_ERR(bd))
-+ return PTR_ERR(bd);
-+
-+ platform_set_drvdata(pdev, bd);
-+
-+ bd->props.max_brightness = KB9202_MAX_INTENSITY;
-+ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_remove(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ bd->props.brightness = 0;
-+ bd->props.power = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ backlight_device_unregister(bd);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int kb9202bl_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 1;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+
-+static int kb9202bl_resume(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+#else
-+#define kb9202bl_suspend NULL
-+#define kb9202bl_resume NULL
-+#endif
-+
-+static struct platform_driver kb9202bl_driver = {
-+ .probe = kb9202bl_probe,
-+ .remove = kb9202bl_remove,
-+ .suspend = kb9202bl_suspend,
-+ .resume = kb9202bl_resume,
-+ .driver = {
-+ .name = "kb9202-bl",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static struct platform_device *kb9202bl_device;
-+
-+static int __init kb9202bl_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&kb9202bl_driver);
-+ if (!ret) {
-+ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
-+ if (!kb9202bl_device)
-+ return -ENOMEM;
-+
-+ ret = platform_device_add(kb9202bl_device);
-+ if (ret) {
-+ platform_device_put(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __exit kb9202bl_exit(void)
-+{
-+ platform_device_unregister(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+}
-+
-+module_init(kb9202bl_init);
-+module_exit(kb9202bl_exit);
-+
-+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
-+MODULE_DESCRIPTION("KB9202 Backlight Driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.24/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c
---- linux-2.6.24/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/video/s1d15605fb.c 2007-12-31 10:44:34.000000000 +0200
-@@ -0,0 +1,658 @@
-+/*
-+ * drivers/video/s1d15605.c
-+ *
-+ * Adapted from several sources including:
-+ * 1) Driver for AT91 LCD Controller
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * 2) Copyright (C) 2005 S. Kevin Hester
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
-+ * display. This display uses a clone of the common Epson SED 1531 display
-+ * controller.
-+ *
-+ * I've heavily borrowed code from the vfb.c driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifdef DEBUG
-+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
-+#else
-+#define MSG(string, args...)
-+#endif
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+#include <asm/backlight.h>
-+#endif
-+
-+#define VIDEOWIDTH 128
-+#define VIDEOHEIGHT 64
-+#define VIDEODEPTH 1 /* bits/pixel */
-+#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
-+
-+/* The number of bytes that actually go to the device */
-+#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
-+#define VIDEOMEMSIZE PAGE_SIZE
-+
-+static struct fb_var_screeninfo s1d15605_default __initdata = {
-+ .xres = VIDEOWIDTH,
-+ .yres = VIDEOHEIGHT,
-+ .xres_virtual = VIDEOWIDTH,
-+ .yres_virtual = VIDEOHEIGHT,
-+ .bits_per_pixel = VIDEODEPTH,
-+ .red = { 0, 1, 0 },
-+ .green = { 0, 1, 0 },
-+ .blue = { 0, 1, 0 },
-+ .activate = FB_ACTIVATE_NOW,
-+ .pixclock = 20000,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
-+ .id = "s1d15605",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_MONO10,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+struct s1d15605fb_info {
-+ struct fb_info *info;
-+ char *mmio;
-+ unsigned long reset_pin;
-+ struct platform_device *pdev;
-+};
-+
-+/*
-+ * LCD device interface
-+ */
-+#define RESET_DISPLAY 0xE2
-+#define LCD_BIAS_1_9 0xA2
-+#define ADC_SELECT_REVERSE 0xA1
-+#define COMMON_OUTPUT_NORMAL 0xC0
-+#define V5_RESISTOR_RATIO 0x26
-+#define ELECTRONIC_VOLUME_SET 0x81
-+#define ELECTRONIC_VOLUME_INIT 0x20
-+#define POWER_CONTROL_SET 0x28
-+#define VOLTAGE_REGULATOR 0x02
-+#define VOLTAGE_FOLLOWER 0x01
-+#define BOOSTER_CIRCUIT 0x04
-+#define DISPLAY_ON 0xAF
-+#define START_LINE_SET 0x40
-+#define PAGE_ADDRESS_SET 0xB0
-+#define COLUMN_ADDRESS_HIGH 0x10
-+#define COLUMN_ADDRESS_LOW 0x00
-+#define RESISTOR_RATIO_START 0x20
-+
-+#define NUM_OF_PAGES 8
-+#define NUM_OF_COLUMNS 128
-+
-+#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
-+#define READ_COMMAND __raw_readb((sinfo)->mmio)
-+#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
-+#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
-+
-+
-+/*
-+ * s1d15605fb_resize_framebuffer
-+ *
-+ * Free allocated space if different. Allocate on new of changed.
-+ * Returns -ENOMEM if the new framebuffer can not be allocated,
-+ * zero on success.
-+ */
-+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ struct fb_var_screeninfo *var = &info->var;
-+ unsigned int new_size;
-+ void *new_vaddr;
-+
-+ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
-+
-+ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
-+ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
-+
-+ if (new_size == fix->smem_len)
-+ return 0;
-+
-+ if (fix->smem_len) {
-+ kfree(info->screen_base);
-+ }
-+
-+ new_vaddr = kmalloc(new_size, GFP_KERNEL);
-+
-+ if (!new_vaddr) {
-+ fix->smem_len = 0;
-+ return -ENOMEM;
-+ }
-+
-+ info->screen_base = new_vaddr;
-+ fix->smem_start = (unsigned)new_vaddr;
-+ fix->smem_len = new_size;
-+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
-+ * bottom) each page seems to be eight pixels high, where these eight pixels are
-+ * one byte
-+ */
-+static void s1d15605_update(struct fb_info *info)
-+{
-+ struct s1d15605fb_info *sinfo = info->par;
-+ int page, i, row, colmask;
-+ u8 retVal, *rowPtr;
-+
-+ WRITE_COMMAND(START_LINE_SET);
-+ for (page = 0; page < NUM_OF_PAGES; ++page) {
-+ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
-+ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
-+ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
-+
-+ for (i = 0; i < NUM_OF_COLUMNS; ++i)
-+ {
-+ /* point of opportunity: optimization */
-+ colmask = (1 << (i & 0x7));
-+ rowPtr = (u8*)(info->screen_base);
-+ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
-+ rowPtr += (i >> 3);
-+ retVal = 0;
-+ for (row = 0; row < 8; ++row)
-+ {
-+ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
-+ rowPtr += VIDEOWIDTH_BYTES;
-+ }
-+ WRITE_DATA(retVal);
-+ }
-+ }
-+
-+ WRITE_COMMAND(DISPLAY_ON);
-+}
-+
-+
-+/*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+ /*
-+ * Some very basic checks
-+ */
-+ if (!var->xres)
-+ var->xres = 1;
-+ if (!var->yres)
-+ var->yres = 1;
-+ if (var->xres > var->xres_virtual)
-+ var->xres_virtual = var->xres;
-+ if (var->yres > var->yres_virtual)
-+ var->yres_virtual = var->yres;
-+
-+ if(var->bits_per_pixel > VIDEODEPTH)
-+ return -EINVAL;
-+
-+ /*
-+ * Memory limit
-+ */
-+ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
-+ ACTUALVIDEOMEMSIZE)
-+ return -ENOMEM;
-+
-+ /*
-+ * Now that we checked it we alter var. The reason being is that the video
-+ * mode passed in might not work but slight changes to it might make it
-+ * work. This way we let the user know what is acceptable.
-+ */
-+ switch (var->bits_per_pixel) {
-+ case 1:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ var->xoffset = var->yoffset = 0;
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int s1d15605_set_par(struct fb_info *info)
-+{
-+ int ret;
-+
-+ MSG("%s:\n", __func__);
-+ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ ret = s1d15605fb_resize_framebuffer(info->par);
-+
-+ info->fix.visual = FB_VISUAL_MONO10;
-+ return ret;
-+}
-+
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+ u_int transp, struct fb_info *info)
-+{
-+ if (regno > 1) /* no. of hw registers - we only do mono now */
-+ return 1;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Currently, the routine will simply shut-off the backlight and prevent
-+ * updates/refreshes. Modify according to application.
-+ *
-+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
-+ */
-+static int s1d15605_blank(int blank, struct fb_info *info)
-+{
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+ if (blank)
-+ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
-+ else
-+ pmac_backlight->props.power = FB_BLANK_UNBLANK;
-+ backlight_update_status(pmac_backlight);
-+#endif
-+ return 1;
-+}
-+
-+
-+/*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+/*
-+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ if (var->vmode & FB_VMODE_YWRAP) {
-+ if (var->yoffset < 0
-+ || var->yoffset >= info->var.yres_virtual
-+ || var->xoffset)
-+ return -EINVAL;
-+ } else {
-+ if (var->xoffset + var->xres > info->var.xres_virtual ||
-+ var->yoffset + var->yres > info->var.yres_virtual)
-+ return -EINVAL;
-+ }
-+ info->var.xoffset = var->xoffset;
-+ info->var.yoffset = var->yoffset;
-+ if (var->vmode & FB_VMODE_YWRAP)
-+ info->var.vmode |= FB_VMODE_YWRAP;
-+ else
-+ info->var.vmode &= ~FB_VMODE_YWRAP;
-+ return 0;
-+}
-+*/
-+
-+
-+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
-+{
-+ cfb_copyarea(info, region);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
-+{
-+ cfb_fillrect(info, rect);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
-+{
-+ cfb_imageblit(p, image);
-+ s1d15605_update(p);
-+}
-+
-+
-+/*
-+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
-+ */
-+static ssize_t s1d15605_write(struct file *file, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ unsigned long p = *ppos;
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int fbidx = iminor(inode);
-+ struct fb_info *info = registered_fb[fbidx];
-+ int err;
-+
-+ if (p > info->fix.smem_len)
-+ return -ENOSPC;
-+ if (count >= info->fix.smem_len)
-+ count = info->fix.smem_len;
-+ err = 0;
-+ if (count + p > info->fix.smem_len) {
-+ count = info->fix.smem_len - p;
-+ err = -ENOSPC;
-+ }
-+ if (count) {
-+ char *base_addr;
-+
-+ base_addr = info->screen_base;
-+ count -= copy_from_user(base_addr+p, buf, count);
-+ *ppos += count;
-+ err = -EFAULT;
-+ }
-+
-+ s1d15605_update(info);
-+
-+ if (count)
-+ return count;
-+
-+ return err;
-+}
-+
-+#ifdef USE_PRIVATE_VMA_FXS
-+static void s1d15605_vma_open(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static void s1d15605_vma_close(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
-+ unsigned long address, int *type)
-+{
-+ struct page *page;
-+ struct fb_info *info = vma->vm_private_data;
-+
-+ page = virt_to_page(info->screen_base);
-+ get_page(page);
-+
-+ // FIXME - now someone has a link to our page, start periodically blitting
-+ // latest updates to the actual device.
-+
-+ return page;
-+}
-+
-+
-+static struct vm_operations_struct s1d15605_vm_ops = {
-+ .open = s1d15605_vma_open,
-+ .close = s1d15605_vma_close,
-+ .nopage = s1d15605_vma_nopage
-+};
-+
-+
-+/* We don't do much here - because we have special vm_ops */
-+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ vma->vm_ops = &s1d15605_vm_ops;
-+ vma->vm_flags |= VM_RESERVED;
-+ vma->vm_private_data = info;
-+ s1d15605_vma_open(vma);
-+
-+ return 0;
-+}
-+#endif /* USE_PRIVATE_VMA_FXS */
-+
-+
-+static struct fb_ops s1d15605fb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = s1d15605_check_var,
-+ .fb_set_par = s1d15605_set_par,
-+ .fb_setcolreg = s1d15605_setcolreg,
-+ .fb_blank = s1d15605_blank,
-+// .fb_pan_display = s1d15605_pan_display,
-+ .fb_fillrect = s1d15605_fillrect,
-+ .fb_copyarea = s1d15605_copyarea,
-+ .fb_imageblit = s1d15605_imageblit,
-+ .fb_write = s1d15605_write,
-+#ifdef USE_PRIVATE_VMA_FXS
-+ .fb_mmap = s1d15605_mmap,
-+#endif
-+};
-+
-+
-+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
-+
-+ char value;
-+
-+ /* release the reset line by reading the device - proto hardware */
-+ value = READ_COMMAND;
-+ value = READ_COMMAND;
-+
-+#ifdef CONFIG_MACH_KB9200
-+ /* new boards have dedicated reset line */
-+ gpio_set_value(sinfo->reset_pin, 1);
-+#endif
-+
-+ /* initialize the device within 5ms */
-+ WRITE_COMMAND(RESET_DISPLAY);
-+ WRITE_COMMAND(LCD_BIAS_1_9);
-+ WRITE_COMMAND(ADC_SELECT_REVERSE);
-+ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
-+ WRITE_COMMAND(V5_RESISTOR_RATIO);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
-+ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
-+ WRITE_COMMAND(DISPLAY_ON);
-+
-+ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(0x33);
-+}
-+
-+
-+static int __init s1d15605fb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct s1d15605fb_info *sinfo;
-+ int ret;
-+
-+ MSG("%s\n", __func__);
-+
-+ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
-+ dev_err(dev, "Cannot allocate framebuffer struct\n");
-+ return -ENOMEM;
-+ }
-+
-+ sinfo = info->par;
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ if (pdev->num_resources < 2) {
-+ dev_err(dev, "Resources unusable\n");
-+ ret = -ENODEV;
-+ goto free_info;
-+ }
-+
-+ info->fbops = &s1d15605fb_ops;
-+ strcpy(info->fix.id, pdev->name);
-+
-+ info->fix.mmio_start = pdev->resource[0].start;
-+ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+ sinfo->reset_pin = pdev->resource[1].start;
-+
-+ ret = s1d15605fb_resize_framebuffer(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
-+ goto free_fb;
-+ }
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "Cannot map LCD memory region\n");
-+ goto release_mem;
-+ }
-+
-+ s1d15605_device_init(sinfo);
-+
-+ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
-+
-+ if (!ret || (ret == 4))
-+ info->var = s1d15605_default;
-+
-+ info->fix = s1d15605_fix;
-+ info->flags = FBINFO_FLAG_DEFAULT |
-+/* FBINFO_HWACCEL_YPAN | */
-+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
-+
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_NOW;
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "Unable to set display parameters\n");
-+ }
-+
-+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+ dev_dbg(dev, "%s SUCCESS\n", __func__);
-+
-+ dev_info(dev, "Driver $Revision: 1.1 $\n");
-+
-+ return 0;
-+
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ kfree(info->screen_base);
-+
-+free_info:
-+ framebuffer_release(info);
-+
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+
-+static int __exit s1d15605fb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct s1d15605fb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ unregister_framebuffer(info);
-+
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+
-+ kfree(info->screen_base);
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+ return 0;
-+}
-+
-+
-+static struct platform_driver s1d15605fb_driver = {
-+ .remove = __exit_p(s1d15605fb_remove),
-+ .driver = {
-+ .name = "s1d15605fb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+static int __init s1d15605fb_init(void)
-+{
-+ return platform_driver_probe(&s1d15605fb_driver, s1d15605fb_probe);
-+}
-+
-+
-+static void __exit s1d15605fb_exit(void)
-+{
-+ platform_driver_unregister(&s1d15605fb_driver);
-+}
-+
-+
-+module_init(s1d15605fb_init);
-+module_exit(s1d15605fb_exit);
-+
-+
-+MODULE_AUTHOR("KwikByte");
-+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.24/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig
---- linux-2.6.24/drivers/watchdog/Kconfig 2008-03-01 22:02:14.000000000 +0200
-+++ linux-2.6/drivers/watchdog/Kconfig 2007-12-31 10:44:10.000000000 +0200
-@@ -66,6 +66,14 @@
- Watchdog timer embedded into AT91RM9200 chips. This will reboot your
- system when the timeout is reached.
-
-+config AT91SAM9_WATCHDOG
-+ tristate "AT91SAM9 watchdog"
-+ depends on ARCH_AT91 && !ARCH_AT91RM9200
-+ select WATCHDOG_NOWAYOUT
-+ help
-+ Watchdog timer embedded into AT91SAM9 chips. This will reboot your
-+ system when the timeout is reached.
-+
- config 21285_WATCHDOG
- tristate "DC21285 watchdog"
- depends on FOOTBRIDGE
-diff -urN -x CVS linux-2.6.24/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile
---- linux-2.6.24/drivers/watchdog/Makefile 2008-03-01 22:02:14.000000000 +0200
-+++ linux-2.6/drivers/watchdog/Makefile 2007-12-31 10:44:20.000000000 +0200
-@@ -26,6 +26,7 @@
-
- # ARM Architecture
- obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
-+obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
- obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
- obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
- obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-diff -urN -x CVS linux-2.6.24/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c
---- linux-2.6.24/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2007-12-31 15:18:43.000000000 +0200
-@@ -0,0 +1,258 @@
-+/*
-+ * Watchdog driver for Atmel AT91SAM9x processors.
-+ *
-+ * Copyright (C) 2007 Renaud CERRATO r.cerrato@til-technologies.fr
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+/*
-+ * The Watchdog Timer Mode Register can be only written to once. If the
-+ * timeout need to be set from Linux, be sure that the bootstrap or the
-+ * bootloader doesn't write to this register.
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/watchdog.h>
-+#include <linux/bitops.h>
-+#include <linux/uaccess.h>
-+
-+#include <asm/arch/at91_wdt.h>
-+
-+
-+#define WDT_MAX_TIME 16 /* seconds */
-+
-+static int wdt_timeout = -1; /* invalid */
-+
-+module_param(wdt_timeout, int, 0);
-+MODULE_PARM_DESC(wdt_timeout, "Watchdog time in seconds. (default = disabled)");
-+
-+
-+static unsigned long at91wdt_busy;
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Reload the watchdog timer. (ie, pat the watchdog)
-+ */
-+static void inline at91_wdt_reload(void)
-+{
-+ at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at91_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(0, &at91wdt_busy))
-+ return -EBUSY;
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device.
-+ */
-+static int at91_wdt_close(struct inode *inode, struct file *file)
-+{
-+ clear_bit(0, &at91wdt_busy);
-+ return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at91_wdt_settimeout(int new_time)
-+{
-+ unsigned int reg, mr;
-+ /*
-+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
-+ *
-+ * Since WDV is a 12-bit counter, the maximum period is
-+ * 4096 / 256 = 16 seconds.
-+ */
-+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-+ return -EINVAL;
-+
-+ wdt_timeout = new_time;
-+
-+ /* Program the Watchdog */
-+ reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
-+ | AT91_WDT_WDRPROC /* causes processor reset */
-+ | AT91_WDT_WDDBGHLT /* disabled in debug mode */
-+ | AT91_WDT_WDD /* restart at any time */
-+ | (((wdt_timeout * 256) - 1) & AT91_WDT_WDV); /* timer value */
-+ at91_sys_write(AT91_WDT_MR, reg);
-+
-+ /* Check if watchdog could be programmed */
-+ mr = at91_sys_read(AT91_WDT_MR);
-+ if (mr != reg) {
-+ printk(KERN_ERR "at91sam9_wdt: Watchdog register already programmed.\n");
-+ return -EIO;
-+ }
-+
-+ at91_wdt_reload();
-+
-+ printk(KERN_INFO "AT91SAM9 Watchdog enabled (%d seconds, nowayout)\n", wdt_timeout);
-+ return 0;
-+}
-+
-+static struct watchdog_info at91_wdt_info = {
-+ .identity = "at91sam9 watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at91_wdt_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+ int new_value, err;
-+
-+ switch (cmd) {
-+ case WDIOC_KEEPALIVE:
-+ at91_wdt_reload(); /* pat the watchdog */
-+ return 0;
-+
-+ case WDIOC_GETSUPPORT:
-+ return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if (get_user(new_value, p))
-+ return -EFAULT;
-+
-+ err = at91_wdt_settimeout(new_value);
-+ if (err)
-+ return err;
-+
-+ return put_user(wdt_timeout, p); /* return current value */
-+
-+ case WDIOC_GETTIMEOUT:
-+ return put_user(wdt_timeout, p);
-+
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ return put_user(0, p);
-+ }
-+ return -ENOTTY;
-+}
-+
-+/*
-+ * Pat the watchdog whenever device is written to.
-+ */
-+static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-+{
-+ at91_wdt_reload(); /* pat the watchdog */
-+ return len;
-+}
-+
-+/* ......................................................................... */
-+
-+static const struct file_operations at91wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .ioctl = at91_wdt_ioctl,
-+ .open = at91_wdt_open,
-+ .release = at91_wdt_close,
-+ .write = at91_wdt_write,
-+};
-+
-+static struct miscdevice at91wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &at91wdt_fops,
-+};
-+
-+static int __init at91wdt_probe(struct platform_device *pdev)
-+{
-+ int res;
-+
-+ if (at91wdt_miscdev.parent)
-+ return -EBUSY;
-+ at91wdt_miscdev.parent = &pdev->dev;
-+
-+ res = misc_register(&at91wdt_miscdev);
-+ if (res)
-+ return res;
-+
-+ /* Set watchdog */
-+ if (at91_wdt_settimeout(wdt_timeout) == -EINVAL) {
-+ pr_info("at91sam9_wdt: invalid timeout (must be between 1 and %d)\n", WDT_MAX_TIME);
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int __exit at91wdt_remove(struct platform_device *pdev)
-+{
-+ int res;
-+
-+ res = misc_deregister(&at91wdt_miscdev);
-+ if (!res)
-+ at91wdt_miscdev.parent = NULL;
-+
-+ return res;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+ return 0;
-+}
-+
-+static int at91wdt_resume(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+#else
-+#define at91wdt_suspend NULL
-+#define at91wdt_resume NULL
-+#endif
-+
-+static struct platform_driver at91wdt_driver = {
-+ .remove = __exit_p(at91wdt_remove),
-+ .suspend = at91wdt_suspend,
-+ .resume = at91wdt_resume,
-+ .driver = {
-+ .name = "at91_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91sam_wdt_init(void)
-+{
-+ return platform_driver_probe(&at91wdt_driver, at91wdt_probe);
-+}
-+
-+static void __exit at91sam_wdt_exit(void)
-+{
-+ platform_driver_unregister(&at91wdt_driver);
-+}
-+
-+module_init(at91sam_wdt_init);
-+module_exit(at91sam_wdt_exit);
-+
-+MODULE_AUTHOR("Renaud CERRATO");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-02-25 21:15:20.000000000 +0200
-@@ -13,26 +13,26 @@
- #ifndef AT91_ECC_H
- #define AT91_ECC_H
-
--#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
-+#define AT91_ECC_CR (0x00) /* Control register */
- #define AT91_ECC_RST (1 << 0) /* Reset parity */
-
--#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
-+#define AT91_ECC_MR (0x04) /* Mode register */
- #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
- #define AT91_ECC_PAGESIZE_528 (0)
- #define AT91_ECC_PAGESIZE_1056 (1)
- #define AT91_ECC_PAGESIZE_2112 (2)
- #define AT91_ECC_PAGESIZE_4224 (3)
-
--#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
-+#define AT91_ECC_SR (0x08) /* Status register */
- #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
- #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
- #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
-
--#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
-+#define AT91_ECC_PR (0x0c) /* Parity register */
- #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
- #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
-
--#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
-+#define AT91_ECC_NPR (0x10) /* NParity register */
- #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
-
- #endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h 1970-01-01 02:00:00.000000000 +0200
-@@ -1,148 +0,0 @@
--/*
-- * include/asm-arm/arch-at91/at91_lcdc.h
-- *
-- * LCD Controller (LCDC).
-- * Based on AT91SAM9261 datasheet revision E.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef AT91_LCDC_H
--#define AT91_LCDC_H
--
--#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
--#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
--#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
--#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
--#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
--#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
--
--#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
--#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
--#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
--
--#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
--#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
--#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
--#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
--
--#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
--#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
--#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
--#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
--
--#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
--#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
--#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
--#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
--#define AT91_LCDC_DISTYPE_TFT (2 << 0)
--#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
--#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
--#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
--#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
--#define AT91_LCDC_IFWIDTH_4 (0 << 3)
--#define AT91_LCDC_IFWIDTH_8 (1 << 3)
--#define AT91_LCDC_IFWIDTH_16 (2 << 3)
--#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
--#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
--#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
--#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
--#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
--#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
--#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
--#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
--#define AT91_LCDC_INVVD_NORMAL (0 << 8)
--#define AT91_LCDC_INVVD_INVERTED (1 << 8)
--#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
--#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
--#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
--#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
--#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
--#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
--#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
--#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
--#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
--#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
--#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
--#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
--#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
--#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
--#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
--#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
--#define AT91_LCDC_MEMOR_BIG (0 << 31)
--#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
--
--#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
--#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
--#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
--#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
--#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
--
--#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
--#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
--#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
--#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
--
--#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
--#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
--#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
--
--#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
--#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
--
--#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
--#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
--#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
--#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
--#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
--#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
--#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
--#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
--#define AT91_LCDC_DP1_2_VAL (0xff)
--#define AT91_LCDC_DP4_7_VAL (0xfffffff)
--#define AT91_LCDC_DP3_5_VAL (0xfffff)
--#define AT91_LCDC_DP2_3_VAL (0xfff)
--#define AT91_LCDC_DP5_7_VAL (0xfffffff)
--#define AT91_LCDC_DP3_4_VAL (0xffff)
--#define AT91_LCDC_DP4_5_VAL (0xfffff)
--#define AT91_LCDC_DP6_7_VAL (0xfffffff)
--
--#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
--#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
--#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
--#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
--
--#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
--#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
--#define AT91_LCDC_PS_DIV1 (0 << 0)
--#define AT91_LCDC_PS_DIV2 (1 << 0)
--#define AT91_LCDC_PS_DIV4 (2 << 0)
--#define AT91_LCDC_PS_DIV8 (3 << 0)
--#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
--#define AT91_LCDC_POL_NEGATIVE (0 << 2)
--#define AT91_LCDC_POL_POSITIVE (1 << 2)
--#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
--#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
--#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
--
--#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
--#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
--
--#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
--#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
--#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
--#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
--#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
--#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
--#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
--#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
--#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
--#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
--#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
--
--#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
--
--#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h linux-2.6/include/asm-arm/arch-at91/at91_mci.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_mci.h 2008-01-16 21:24:29.000000000 +0200
-@@ -89,7 +89,7 @@
- #define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
- #define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
- #define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
--#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
-+#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
- #define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
- #define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
- #define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-03-01 22:06:19.000000000 +0200
-@@ -25,6 +25,7 @@
- #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
- #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
- #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
- #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
- #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
- #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
-@@ -37,7 +38,9 @@
- #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
- #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
--#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
-+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
-+
-+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
- #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
- #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
- #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-@@ -52,6 +55,10 @@
- #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
- #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
- #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
-+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
-+#define AT91_PMC_USBDIV_1 (0 << 28)
-+#define AT91_PMC_USBDIV_2 (1 << 28)
-+#define AT91_PMC_USBDIV_4 (2 << 28)
- #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
-
- #define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-@@ -69,10 +76,13 @@
- #define AT91_PMC_PRES_32 (5 << 2)
- #define AT91_PMC_PRES_64 (6 << 2)
- #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
--#define AT91_PMC_MDIV_1 (0 << 8)
--#define AT91_PMC_MDIV_2 (1 << 8)
--#define AT91_PMC_MDIV_3 (2 << 8)
--#define AT91_PMC_MDIV_4 (3 << 8)
-+#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
-+#define AT91RM9200_PMC_MDIV_2 (1 << 8)
-+#define AT91RM9200_PMC_MDIV_3 (2 << 8)
-+#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
-+#define AT91SAM9_PMC_MDIV_2 (1 << 8)
-+#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-
- #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-02-18 18:50:29.000000000 +0200
-@@ -13,19 +13,19 @@
- #ifndef AT91_RTT_H
- #define AT91_RTT_H
-
--#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
-+#define AT91_RTT_MR (0x00) /* Real-time Mode Register */
- #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
- #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
- #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
- #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
-
--#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
-+#define AT91_RTT_AR (0x04) /* Real-time Alarm Register */
- #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
-
--#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
-+#define AT91_RTT_VR (0x08) /* Real-time Value Register */
- #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
-
--#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
-+#define AT91_RTT_SR (0x0c) /* Real-time Status Register */
- #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
- #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
-
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-02-24 23:02:31.000000000 +0200
-@@ -24,10 +24,12 @@
- #define AT91_SHDW_WKMODE0_LOW 2
- #define AT91_SHDW_WKMODE0_ANYLEVEL 3
- #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
-+#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
- #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
-
- #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
- #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
- #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
-+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
-
- #endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h linux-2.6/include/asm-arm/arch-at91/at91_twi.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_twi.h 2008-01-16 21:24:29.000000000 +0200
-@@ -21,6 +21,8 @@
- #define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
- #define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
- #define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
-+#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
-+#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
- #define AT91_TWI_SWRST (1 << 7) /* Software Reset */
-
- #define AT91_TWI_MMR 0x04 /* Master Mode Register */
-@@ -32,6 +34,9 @@
- #define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
- #define AT91_TWI_DADR (0x7f << 16) /* Device Address */
-
-+#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
-+#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
-+
- #define AT91_TWI_IADR 0x0c /* Internal Address Register */
-
- #define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
-@@ -43,9 +48,15 @@
- #define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
- #define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
- #define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
-+#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
-+#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
-+#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
- #define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
- #define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
- #define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
-+#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
-+#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
-+#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
-
- #define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
- #define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-03-01 19:37:40.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ * include/asm-arm/arch-at91/at91cap9.h
-+ *
-+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * Common definitions.
-+ * Based on AT91CAP9 datasheet revision B (Preliminary).
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91CAP9_H
-+#define AT91CAP9_H
-+
-+/*
-+ * Peripheral identifiers/interrupts.
-+ */
-+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-+#define AT91_ID_SYS 1 /* System Peripherals */
-+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-+#define AT91CAP9_ID_US0 8 /* USART 0 */
-+#define AT91CAP9_ID_US1 9 /* USART 1 */
-+#define AT91CAP9_ID_US2 10 /* USART 2 */
-+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-+#define AT91CAP9_ID_CAN 13 /* CAN */
-+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-+
-+/*
-+ * User Peripheral physical base addresses.
-+ */
-+#define AT91CAP9_BASE_UDPHS 0xfff78000
-+#define AT91CAP9_BASE_TCB0 0xfff7c000
-+#define AT91CAP9_BASE_TC0 0xfff7c000
-+#define AT91CAP9_BASE_TC1 0xfff7c040
-+#define AT91CAP9_BASE_TC2 0xfff7c080
-+#define AT91CAP9_BASE_MCI0 0xfff80000
-+#define AT91CAP9_BASE_MCI1 0xfff84000
-+#define AT91CAP9_BASE_TWI 0xfff88000
-+#define AT91CAP9_BASE_US0 0xfff8c000
-+#define AT91CAP9_BASE_US1 0xfff90000
-+#define AT91CAP9_BASE_US2 0xfff94000
-+#define AT91CAP9_BASE_SSC0 0xfff98000
-+#define AT91CAP9_BASE_SSC1 0xfff9c000
-+#define AT91CAP9_BASE_AC97C 0xfffa0000
-+#define AT91CAP9_BASE_SPI0 0xfffa4000
-+#define AT91CAP9_BASE_SPI1 0xfffa8000
-+#define AT91CAP9_BASE_CAN 0xfffac000
-+#define AT91CAP9_BASE_PWMC 0xfffb8000
-+#define AT91CAP9_BASE_EMAC 0xfffbc000
-+#define AT91CAP9_BASE_ADC 0xfffc0000
-+#define AT91CAP9_BASE_ISI 0xfffc4000
-+#define AT91_BASE_SYS 0xffffe200
-+
-+/*
-+ * System Peripherals (offset from AT91_BASE_SYS)
-+ */
-+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
-+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
-+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
-+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
-+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
-+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-+
-+#define AT91_USART0 AT91CAP9_BASE_US0
-+#define AT91_USART1 AT91CAP9_BASE_US1
-+#define AT91_USART2 AT91CAP9_BASE_US2
-+
-+
-+/*
-+ * Internal Memory.
-+ */
-+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-+
-+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-+
-+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
-+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-+
-+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-03-01 21:29:08.000000000 +0200
-@@ -0,0 +1,100 @@
-+/*
-+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
-+ *
-+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
-+ * Based on AT91CAP9 datasheet revision B.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91CAP9_DDRSDR_H
-+#define AT91CAP9_DDRSDR_H
-+
-+#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
-+#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
-+#define AT91_DDRSDRC_MODE_NORMAL 0
-+#define AT91_DDRSDRC_MODE_NOP 1
-+#define AT91_DDRSDRC_MODE_PRECHARGE 2
-+#define AT91_DDRSDRC_MODE_LMR 3
-+#define AT91_DDRSDRC_MODE_REFRESH 4
-+#define AT91_DDRSDRC_MODE_EXT_LMR 5
-+#define AT91_DDRSDRC_MODE_DEEP 6
-+
-+#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
-+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-+
-+#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
-+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
-+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
-+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
-+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
-+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
-+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
-+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
-+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
-+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
-+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
-+#define AT91_DDRSDRC_NR_11 (0 << 2)
-+#define AT91_DDRSDRC_NR_12 (1 << 2)
-+#define AT91_DDRSDRC_NR_13 (2 << 2)
-+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
-+#define AT91_DDRSDRC_CAS_2 (2 << 4)
-+#define AT91_DDRSDRC_CAS_3 (3 << 4)
-+#define AT91_DDRSDRC_CAS_25 (6 << 4)
-+#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
-+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-+
-+#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
-+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
-+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
-+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
-+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
-+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
-+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
-+#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
-+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-+
-+#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
-+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
-+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
-+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
-+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-+
-+#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
-+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
-+#define AT91_DDRSDRC_LPCB_DISABLE 0
-+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
-+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
-+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
-+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
-+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
-+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
-+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-+
-+#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
-+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
-+#define AT91_DDRSDRC_MD_SDR 0
-+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-+#define AT91_DDRSDRC_MD_DDR 2
-+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-+
-+#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
-+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
-+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
-+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-+#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-+#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-+#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
-+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-+#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-+#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
-+
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-02-18 22:43:38.000000000 +0200
-@@ -0,0 +1,132 @@
-+/*
-+ * include/asm-arm/arch-at91/at91cap9_matrix.h
-+ *
-+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
-+ * Copyright (C) 2006 Atmel Corporation.
-+ *
-+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-+ * Based on AT91CAP9 datasheet revision B (Preliminary).
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91CAP9_MATRIX_H
-+#define AT91CAP9_MATRIX_H
-+
-+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-+
-+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-+
-+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-+
-+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-+#define AT91_MATRIX_RCB2 (1 << 2)
-+#define AT91_MATRIX_RCB3 (1 << 3)
-+#define AT91_MATRIX_RCB4 (1 << 4)
-+#define AT91_MATRIX_RCB5 (1 << 5)
-+#define AT91_MATRIX_RCB6 (1 << 6)
-+#define AT91_MATRIX_RCB7 (1 << 7)
-+#define AT91_MATRIX_RCB8 (1 << 8)
-+#define AT91_MATRIX_RCB9 (1 << 9)
-+#define AT91_MATRIX_RCB10 (1 << 10)
-+#define AT91_MATRIX_RCB11 (1 << 11)
-+
-+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-+
-+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-+
-+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h linux-2.6/include/asm-arm/arch-at91/at91rm9200.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91rm9200.h 2008-02-24 19:07:01.000000000 +0200
-@@ -95,6 +95,12 @@
-
- #define AT91_MATRIX 0 /* not supported */
-
-+#define AT91_USART0 AT91RM9200_BASE_US0
-+#define AT91_USART1 AT91RM9200_BASE_US1
-+#define AT91_USART2 AT91RM9200_BASE_US2
-+#define AT91_USART3 AT91RM9200_BASE_US3
-+
-+
- /*
- * Internal Memory.
- */
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h linux-2.6/include/asm-arm/arch-at91/at91sam9260.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260.h 2008-02-24 19:00:30.000000000 +0200
-@@ -99,6 +99,13 @@
- #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
- #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-+#define AT91_USART0 AT91SAM9260_BASE_US0
-+#define AT91_USART1 AT91SAM9260_BASE_US1
-+#define AT91_USART2 AT91SAM9260_BASE_US2
-+#define AT91_USART3 AT91SAM9260_BASE_US3
-+#define AT91_USART4 AT91SAM9260_BASE_US4
-+#define AT91_USART5 AT91SAM9260_BASE_US5
-+
-
- /*
- * Internal Memory.
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-01-16 21:24:29.000000000 +0200
-@@ -67,7 +67,7 @@
- #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
- #define AT91_MATRIX_CS4A_SMC (0 << 4)
- #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
--#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
- #define AT91_MATRIX_CS5A_SMC (0 << 5)
- #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
- #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h linux-2.6/include/asm-arm/arch-at91/at91sam9261.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9261.h 2008-02-24 19:00:30.000000000 +0200
-@@ -84,6 +84,10 @@
- #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
- #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-+#define AT91_USART0 AT91SAM9261_BASE_US0
-+#define AT91_USART1 AT91SAM9261_BASE_US1
-+#define AT91_USART2 AT91SAM9261_BASE_US2
-+
-
- /*
- * Internal Memory.
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h linux-2.6/include/asm-arm/arch-at91/at91sam9263.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9263.h 2008-02-25 21:16:43.000000000 +0200
-@@ -101,8 +101,14 @@
- #define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
- #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-
-+#define AT91_SDRAMC AT91_SDRAMC0
- #define AT91_SMC AT91_SMC0
-
-+#define AT91_USART0 AT91SAM9263_BASE_US0
-+#define AT91_USART1 AT91SAM9263_BASE_US1
-+#define AT91_USART2 AT91SAM9263_BASE_US2
-+
-+
- /*
- * Internal Memory.
- */
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h 2008-02-18 22:44:20.000000000 +0200
-@@ -44,7 +44,7 @@
- #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
- #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
- #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
--#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
- #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
- #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
- #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200
-@@ -1,141 +0,0 @@
--/*
-- * include/asm-arm/arch-at91/at91sam926x_mc.h
-- *
-- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
-- * Based on AT91SAM9261 datasheet revision D.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef AT91SAM926x_MC_H
--#define AT91SAM926x_MC_H
--
--/* SDRAM Controller (SDRAMC) registers */
--#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
--#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
--#define AT91_SDRAMC_MODE_NORMAL 0
--#define AT91_SDRAMC_MODE_NOP 1
--#define AT91_SDRAMC_MODE_PRECHARGE 2
--#define AT91_SDRAMC_MODE_LMR 3
--#define AT91_SDRAMC_MODE_REFRESH 4
--#define AT91_SDRAMC_MODE_EXT_LMR 5
--#define AT91_SDRAMC_MODE_DEEP 6
--
--#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
--#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
--
--#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
--#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
--#define AT91_SDRAMC_NC_8 (0 << 0)
--#define AT91_SDRAMC_NC_9 (1 << 0)
--#define AT91_SDRAMC_NC_10 (2 << 0)
--#define AT91_SDRAMC_NC_11 (3 << 0)
--#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
--#define AT91_SDRAMC_NR_11 (0 << 2)
--#define AT91_SDRAMC_NR_12 (1 << 2)
--#define AT91_SDRAMC_NR_13 (2 << 2)
--#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
--#define AT91_SDRAMC_NB_2 (0 << 4)
--#define AT91_SDRAMC_NB_4 (1 << 4)
--#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
--#define AT91_SDRAMC_CAS_1 (1 << 5)
--#define AT91_SDRAMC_CAS_2 (2 << 5)
--#define AT91_SDRAMC_CAS_3 (3 << 5)
--#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
--#define AT91_SDRAMC_DBW_32 (0 << 7)
--#define AT91_SDRAMC_DBW_16 (1 << 7)
--#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
--#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
--#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
--#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
--#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
--#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
--
--#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
--#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
--#define AT91_SDRAMC_LPCB_DISABLE 0
--#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
--#define AT91_SDRAMC_LPCB_POWER_DOWN 2
--#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
--#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
--#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
--#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
--#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
--#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
--#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
--#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
--
--#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
--#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
--#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
--#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
--#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
--
--#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
--#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
--#define AT91_SDRAMC_MD_SDRAM 0
--#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
--
--
--/* Static Memory Controller (SMC) registers */
--#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
--#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
--#define AT91_SMC_NWESETUP_(x) ((x) << 0)
--#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
--#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
--#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
--#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
--#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
--#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
--
--#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
--#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
--#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
--#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
--#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
--#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
--#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
--#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
--#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
--
--#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
--#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
--#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
--#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
--#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
--
--#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
--#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
--#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
--#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
--#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
--#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
--#define AT91_SMC_EXNWMODE_READY (3 << 4)
--#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
--#define AT91_SMC_BAT_SELECT (0 << 8)
--#define AT91_SMC_BAT_WRITE (1 << 8)
--#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
--#define AT91_SMC_DBW_8 (0 << 12)
--#define AT91_SMC_DBW_16 (1 << 12)
--#define AT91_SMC_DBW_32 (2 << 12)
--#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
--#define AT91_SMC_TDF_(x) ((x) << 16)
--#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
--#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
--#define AT91_SMC_PS (3 << 28) /* Page Size */
--#define AT91_SMC_PS_4 (0 << 28)
--#define AT91_SMC_PS_8 (1 << 28)
--#define AT91_SMC_PS_16 (2 << 28)
--#define AT91_SMC_PS_32 (3 << 28)
--
--#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
--#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
--#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
--#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
--#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
--#endif
--
--#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h 2008-03-01 21:17:06.000000000 +0200
-@@ -0,0 +1,83 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam926x_sdramc.h
-+ *
-+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM926x_SDRAMC_H
-+#define AT91SAM926x_SDRAMC_H
-+
-+/* SDRAM Controller (SDRAMC) registers */
-+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
-+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-+#define AT91_SDRAMC_MODE_NORMAL 0
-+#define AT91_SDRAMC_MODE_NOP 1
-+#define AT91_SDRAMC_MODE_PRECHARGE 2
-+#define AT91_SDRAMC_MODE_LMR 3
-+#define AT91_SDRAMC_MODE_REFRESH 4
-+#define AT91_SDRAMC_MODE_EXT_LMR 5
-+#define AT91_SDRAMC_MODE_DEEP 6
-+
-+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
-+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-+
-+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
-+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-+#define AT91_SDRAMC_NC_8 (0 << 0)
-+#define AT91_SDRAMC_NC_9 (1 << 0)
-+#define AT91_SDRAMC_NC_10 (2 << 0)
-+#define AT91_SDRAMC_NC_11 (3 << 0)
-+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-+#define AT91_SDRAMC_NR_11 (0 << 2)
-+#define AT91_SDRAMC_NR_12 (1 << 2)
-+#define AT91_SDRAMC_NR_13 (2 << 2)
-+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-+#define AT91_SDRAMC_NB_2 (0 << 4)
-+#define AT91_SDRAMC_NB_4 (1 << 4)
-+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-+#define AT91_SDRAMC_CAS_1 (1 << 5)
-+#define AT91_SDRAMC_CAS_2 (2 << 5)
-+#define AT91_SDRAMC_CAS_3 (3 << 5)
-+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
-+#define AT91_SDRAMC_DBW_32 (0 << 7)
-+#define AT91_SDRAMC_DBW_16 (1 << 7)
-+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-+
-+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
-+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
-+#define AT91_SDRAMC_LPCB_DISABLE 0
-+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
-+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
-+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
-+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
-+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
-+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-+
-+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
-+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-+
-+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
-+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
-+#define AT91_SDRAMC_MD_SDRAM 0
-+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-+
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h 2008-03-01 20:28:24.000000000 +0200
-@@ -0,0 +1,73 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam926x_smc.h
-+ *
-+ * Static Memory Controllers (SMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM926x_SMC_H
-+#define AT91SAM926x_SMC_H
-+
-+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-+
-+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-+
-+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-+
-+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-+#define AT91_SMC_EXNWMODE_READY (3 << 4)
-+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-+#define AT91_SMC_BAT_SELECT (0 << 8)
-+#define AT91_SMC_BAT_WRITE (1 << 8)
-+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-+#define AT91_SMC_DBW_8 (0 << 12)
-+#define AT91_SMC_DBW_16 (1 << 12)
-+#define AT91_SMC_DBW_32 (2 << 12)
-+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-+#define AT91_SMC_TDF_(x) ((x) << 16)
-+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-+#define AT91_SMC_PS (3 << 28) /* Page Size */
-+#define AT91_SMC_PS_4 (0 << 28)
-+#define AT91_SMC_PS_8 (1 << 28)
-+#define AT91_SMC_PS_16 (2 << 28)
-+#define AT91_SMC_PS_32 (3 << 28)
-+
-+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#endif
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-02-24 19:00:30.000000000 +0200
-@@ -94,6 +94,11 @@
- #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
- #define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
-
-+#define AT91_USART0 AT91SAM9RL_BASE_US0
-+#define AT91_USART1 AT91SAM9RL_BASE_US1
-+#define AT91_USART2 AT91SAM9RL_BASE_US2
-+#define AT91_USART3 AT91SAM9RL_BASE_US3
-+
-
- /*
- * Internal Memory.
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h
---- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2008-02-18 22:44:40.000000000 +0200
-@@ -38,7 +38,7 @@
- #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
- #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
- #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
--#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
- #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
- #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
- #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h
---- linux-2.6.24/include/asm-arm/arch-at91/board.h 2008-03-01 22:02:15.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-03-01 23:39:28.000000000 +0200
-@@ -34,6 +34,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/device.h>
- #include <linux/i2c.h>
-+#include <linux/leds.h>
- #include <linux/spi/spi.h>
-
- /* USB Device */
-@@ -71,7 +72,7 @@
- };
- extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
--#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
-+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
- #define eth_platform_data at91_eth_data
- #endif
-
-@@ -101,13 +102,23 @@
- extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-+#define ATMEL_UART_CTS 0x01
-+#define ATMEL_UART_RTS 0x02
-+#define ATMEL_UART_DSR 0x04
-+#define ATMEL_UART_DTR 0x08
-+#define ATMEL_UART_DCD 0x10
-+#define ATMEL_UART_RI 0x20
-+
-+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-+extern void __init at91_set_serial_console(unsigned portnr);
-+
- struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
- };
- extern struct platform_device *atmel_default_console_device;
--extern void __init at91_init_serial(struct at91_uart_config *config);
-+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
-
- struct atmel_uart_data {
- short use_dma_tx; /* use transmit DMA? */
-@@ -116,6 +127,23 @@
- };
- extern void __init at91_add_device_serial(void);
-
-+ /*
-+ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
-+ * platform devices. Their SSC ID is part of their configuration data,
-+ * along with information about which SSC signals they should use.
-+ */
-+#define ATMEL_SSC_TK 0x01
-+#define ATMEL_SSC_TF 0x02
-+#define ATMEL_SSC_TD 0x04
-+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-+
-+#define ATMEL_SSC_RK 0x10
-+#define ATMEL_SSC_RF 0x20
-+#define ATMEL_SSC_RD 0x40
-+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-+
-+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-+
- /* LCD Controller */
- struct atmel_lcdfb_info;
- extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-@@ -126,10 +154,12 @@
- };
- extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
-+ /* ISI */
-+extern void __init at91_add_device_isi(void);
-+
- /* LEDs */
--extern u8 at91_leds_cpu;
--extern u8 at91_leds_timer;
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
- /* FIXME: this needs a better location, but gets stuff building again */
- extern int at91_suspend_entering_slow_clock(void);
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.24/include/asm-arm/arch-at91/cpu.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-01-17 11:41:08.000000000 +0200
-@@ -21,13 +21,13 @@
- #define ARCH_ID_AT91SAM9260 0x019803a0
- #define ARCH_ID_AT91SAM9261 0x019703a0
- #define ARCH_ID_AT91SAM9263 0x019607a0
-+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-+#define ARCH_ID_AT91CAP9 0x039A03A0
-
- #define ARCH_ID_AT91SAM9XE128 0x329973a0
- #define ARCH_ID_AT91SAM9XE256 0x329a93a0
- #define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-
--#define ARCH_ID_AT91SAM9RL64 0x019b03a0
--
- #define ARCH_ID_AT91M40800 0x14080044
- #define ARCH_ID_AT91R40807 0x44080746
- #define ARCH_ID_AT91M40807 0x14080745
-@@ -81,6 +81,11 @@
- #define cpu_is_at91sam9rl() (0)
- #endif
-
-+#ifdef CONFIG_ARCH_AT91CAP9
-+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
-+#else
-+#define cpu_is_at91cap9() (0)
-+#endif
-
- /*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S linux-2.6/include/asm-arm/arch-at91/entry-macro.S
---- linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/entry-macro.S 2008-01-16 21:24:29.000000000 +0200
-@@ -17,13 +17,13 @@
- .endm
-
- .macro get_irqnr_preamble, base, tmp
-+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
- ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/hardware.h linux-2.6/include/asm-arm/arch-at91/hardware.h
---- linux-2.6.24/include/asm-arm/arch-at91/hardware.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/hardware.h 2008-01-16 21:25:18.000000000 +0200
-@@ -26,6 +26,8 @@
- #include <asm/arch/at91sam9263.h>
- #elif defined(CONFIG_ARCH_AT91SAM9RL)
- #include <asm/arch/at91sam9rl.h>
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+#include <asm/arch/at91cap9.h>
- #elif defined(CONFIG_ARCH_AT91X40)
- #include <asm/arch/at91x40.h>
- #else
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.24/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//* ATMEL Microcontroller Software Support - ROUSSET -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name : ics1523.h
-+//* Object : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED : Creation
-+//* 1.2 13/01/03 FB : Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
-+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
-+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
-+
-+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
-+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS1523_ACCESS_OK 0 /* OK */
-+#define ICS1523_ACCESS_ERROR -1 /* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_ADDR 0x26 /* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition */
-+/*--------------------------------------------------*/
-+
-+#define ICS_ICR 0x0 /* Input Control Register */
-+#define ICS_LCR 0x1 /* Loop Control Register */
-+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
-+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
-+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
-+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
-+#define ICS_OE 0x6 /* Output Enables Register */
-+#define ICS_OD 0x7 /* Osc Divider Register */
-+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
-+#define ICS_VID 0x10 /* Chip Version Register */
-+#define ICS_RID 0x11 /* Chip Revision Register */
-+#define ICS_SR 0x12 /* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition */
-+/*------------------------------------------------------*/
-+
-+#define ICS_PDEN 0x1 /* Phase Detector Enable */
-+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
-+#define ICS_REFPOL 0x4 /* External Reference Polarity */
-+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
-+#define ICS_FBKSEL 0x10 /* External Feedback Select */
-+#define ICS_FUNCSEL 0x20 /* Function Out Select */
-+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
-+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition */
-+/*-----------------------------------------------------*/
-+
-+#define ICS_PFD 0x7 /* Phase Detector Gain */
-+#define ICS_PSD 0x30 /* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
-+/*------------------------------------------------------------*/
-+
-+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
-+#define ICS_FILSEL 0x80 /* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
-+/*----------------------------------------------------------------*/
-+
-+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
-+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition */
-+/*-------------------------------------------------------*/
-+
-+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
-+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
-+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
-+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
-+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
-+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
-+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
-+#define ICS_INSEL 0x80 /* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition */
-+/*---------------------------------------------------*/
-+
-+#define ICS_DPAR 0x0A /* DPA Reset Command */
-+#define ICS_PLLR 0x50 /* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition */
-+/*------------------------------------------------*/
-+
-+#define ICS_CHIPV 0xFF /* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition */
-+/*-------------------------------------------------*/
-+
-+#define ICS_CHIPR 0xFF /* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition */
-+/*------------------------------------------*/
-+
-+#define ICS_DPALOCK 0x1 /* DPA Lock Status */
-+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h
---- linux-2.6.24/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR 153 /* registered device number */
-+
-+#define DEFAULT_SPI_CLK 6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ * DataFlash uses maximum of 2
-+ * spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS 8
-+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
-+ int txlen[MAX_SPI_TRANSFERS];
-+ void* rx[MAX_SPI_TRANSFERS]; /* receive */
-+ int rxlen[MAX_SPI_TRANSFERS];
-+ int nr_transfers; /* number of transfers */
-+ int curr; /* current transfer */
-+};
-+
-+struct spi_local {
-+ unsigned int pcs; /* Peripheral Chip Select value */
-+
-+ struct spi_transfer_list *xfers; /* current transfer list */
-+ dma_addr_t tx, rx; /* DMA address for current transfer */
-+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h
---- linux-2.6.24/include/asm-arm/arch-at91/timex.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-01-16 21:25:18.000000000 +0200
-@@ -42,6 +42,11 @@
- #define AT91SAM9_MASTER_CLOCK 100000000
- #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-+#elif defined(CONFIG_ARCH_AT91CAP9)
-+
-+#define AT91CAP9_MASTER_CLOCK 100000000
-+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
-+
- #elif defined(CONFIG_ARCH_AT91X40)
-
- #define AT91X40_MASTER_CLOCK 40000000
-diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/uncompress.h linux-2.6/include/asm-arm/arch-at91/uncompress.h
---- linux-2.6.24/include/asm-arm/arch-at91/uncompress.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/uncompress.h 2008-02-24 19:00:30.000000000 +0200
-@@ -22,7 +22,23 @@
- #define __ASM_ARCH_UNCOMPRESS_H
-
- #include <asm/io.h>
--#include <asm/arch/at91_dbgu.h>
-+#include <linux/atmel_serial.h>
-+
-+#if defined(CONFIG_AT91_EARLY_DBGU)
-+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
-+#elif defined(CONFIG_AT91_EARLY_USART0)
-+#define UART_OFFSET AT91_USART0
-+#elif defined(CONFIG_AT91_EARLY_USART1)
-+#define UART_OFFSET AT91_USART1
-+#elif defined(CONFIG_AT91_EARLY_USART2)
-+#define UART_OFFSET AT91_USART2
-+#elif defined(CONFIG_AT91_EARLY_USART3)
-+#define UART_OFFSET AT91_USART3
-+#elif defined(CONFIG_AT91_EARLY_USART4)
-+#define UART_OFFSET AT91_USART4
-+#elif defined(CONFIG_AT91_EARLY_USART5)
-+#define UART_OFFSET AT91_USART5
-+#endif
-
- /*
- * The following code assumes the serial port has already been
-@@ -33,22 +49,22 @@
- */
- static void putc(int c)
- {
--#ifdef AT91_DBGU
-- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
-+#ifdef UART_OFFSET
-+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
-
-- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
-+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
- barrier();
-- __raw_writel(c, sys + AT91_DBGU_THR);
-+ __raw_writel(c, sys + ATMEL_US_THR);
- #endif
- }
-
- static inline void flush(void)
- {
--#ifdef AT91_DBGU
-- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
-+#ifdef UART_OFFSET
-+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
-
- /* wait for transmission to complete */
-- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
-+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
- barrier();
- #endif
- }
-diff -urN -x CVS linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-2.6/include/asm-avr32/arch-at32ap/cpu.h
---- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-avr32/arch-at32ap/cpu.h 2008-01-16 21:35:26.000000000 +0200
-@@ -30,5 +30,6 @@
- #define cpu_is_at91sam9261() (0)
- #define cpu_is_at91sam9263() (0)
- #define cpu_is_at91sam9rl() (0)
-+#define cpu_is_at91cap9() (0)
-
- #endif /* __ASM_ARCH_CPU_H */
-diff -urN -x CVS linux-2.6.24/include/linux/atmel_serial.h linux-2.6/include/linux/atmel_serial.h
---- linux-2.6.24/include/linux/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/linux/atmel_serial.h 2008-02-24 19:00:30.000000000 +0200
-@@ -0,0 +1,127 @@
-+/*
-+ * include/linux/atmel_serial.h
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * USART registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef ATMEL_SERIAL_H
-+#define ATMEL_SERIAL_H
-+
-+#define ATMEL_US_CR 0x00 /* Control Register */
-+#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
-+#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
-+#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
-+#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
-+#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
-+#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
-+#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
-+#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
-+#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
-+#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
-+#define ATMEL_US_SENDA (1 << 12) /* Send Address */
-+#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
-+#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
-+#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
-+#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
-+#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
-+#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
-+#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
-+
-+#define ATMEL_US_MR 0x04 /* Mode Register */
-+#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
-+#define ATMEL_US_USMODE_NORMAL 0
-+#define ATMEL_US_USMODE_RS485 1
-+#define ATMEL_US_USMODE_HWHS 2
-+#define ATMEL_US_USMODE_MODEM 3
-+#define ATMEL_US_USMODE_ISO7816_T0 4
-+#define ATMEL_US_USMODE_ISO7816_T1 6
-+#define ATMEL_US_USMODE_IRDA 8
-+#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
-+#define ATMEL_US_USCLKS_MCK (0 << 4)
-+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
-+#define ATMEL_US_USCLKS_SCK (3 << 4)
-+#define ATMEL_US_CHRL (3 << 6) /* Character Length */
-+#define ATMEL_US_CHRL_5 (0 << 6)
-+#define ATMEL_US_CHRL_6 (1 << 6)
-+#define ATMEL_US_CHRL_7 (2 << 6)
-+#define ATMEL_US_CHRL_8 (3 << 6)
-+#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
-+#define ATMEL_US_PAR (7 << 9) /* Parity Type */
-+#define ATMEL_US_PAR_EVEN (0 << 9)
-+#define ATMEL_US_PAR_ODD (1 << 9)
-+#define ATMEL_US_PAR_SPACE (2 << 9)
-+#define ATMEL_US_PAR_MARK (3 << 9)
-+#define ATMEL_US_PAR_NONE (4 << 9)
-+#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
-+#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
-+#define ATMEL_US_NBSTOP_1 (0 << 12)
-+#define ATMEL_US_NBSTOP_1_5 (1 << 12)
-+#define ATMEL_US_NBSTOP_2 (2 << 12)
-+#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
-+#define ATMEL_US_CHMODE_NORMAL (0 << 14)
-+#define ATMEL_US_CHMODE_ECHO (1 << 14)
-+#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
-+#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
-+#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
-+#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
-+#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
-+#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
-+#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
-+#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
-+#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
-+#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
-+
-+#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
-+#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
-+#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
-+#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
-+#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
-+#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
-+#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
-+#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
-+#define ATMEL_US_PARE (1 << 7) /* Parity Error */
-+#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
-+#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
-+#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
-+#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
-+#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
-+#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
-+#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
-+#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
-+#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
-+#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
-+#define ATMEL_US_RI (1 << 20) /* RI */
-+#define ATMEL_US_DSR (1 << 21) /* DSR */
-+#define ATMEL_US_DCD (1 << 22) /* DCD */
-+#define ATMEL_US_CTS (1 << 23) /* CTS */
-+
-+#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
-+#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
-+#define ATMEL_US_CSR 0x14 /* Channel Status Register */
-+#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
-+#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
-+#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
-+
-+#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
-+#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
-+
-+#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
-+#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
-+
-+#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
-+#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
-+
-+#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
-+#define ATMEL_US_NER 0x44 /* Number of Errors Register */
-+#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
-+
-+#endif
-diff -urN -x CVS linux-2.6.24/include/linux/clk.h linux-2.6/include/linux/clk.h
---- linux-2.6.24/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200
-@@ -121,4 +121,24 @@
- */
- struct clk *clk_get_parent(struct clk *clk);
-
-+/**
-+ * clk_must_disable - report whether a clock's users must disable it
-+ * @clk: one node in the clock tree
-+ *
-+ * This routine returns true only if the upcoming system state requires
-+ * disabling the specified clock.
-+ *
-+ * It's common for platform power states to constrain certain clocks (and
-+ * their descendants) to be unavailable, while other states allow that
-+ * clock to be active. A platform's power states often include an "all on"
-+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
-+ * operating states which sacrifice functionality for lower power usage.
-+ *
-+ * The constraint value is commonly tested in device driver suspend(), to
-+ * leave clocks active if they are needed for features like wakeup events.
-+ * On platforms that support reduced functionality operating states, the
-+ * constraint may also need to be tested during resume() and probe() calls.
-+ */
-+int clk_must_disable(struct clk *clk);
-+
- #endif
-diff -urN -x CVS linux-2.6.24/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h
---- linux-2.6.24/include/linux/i2c-id.h 2008-03-01 22:02:17.000000000 +0200
-+++ linux-2.6/include/linux/i2c-id.h 2008-01-16 13:15:35.000000000 +0200
-@@ -211,6 +211,7 @@
-
- /* --- PCA 9564 based algorithms */
- #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
-+#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
-
- /* --- ACPI Embedded controller algorithms */
- #define I2C_HW_ACPI_EC 0x1f0000
-diff -urN -x CVS linux-2.6.24/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h
---- linux-2.6.24/include/video/atmel_lcdc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/video/atmel_lcdc.h 2008-02-25 22:45:57.000000000 +0200
-@@ -22,7 +22,7 @@
- #ifndef __ATMEL_LCDC_H__
- #define __ATMEL_LCDC_H__
-
-- /* LCD Controller info data structure */
-+ /* LCD Controller info data structure, stored in device platform_data */
- struct atmel_lcdfb_info {
- spinlock_t lock;
- struct fb_info *info;
-@@ -33,7 +33,15 @@
- struct platform_device *pdev;
- struct clk *bus_clk;
- struct clk *lcdc_clk;
-- unsigned int default_bpp;
-+
-+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
-+ struct backlight_device *backlight;
-+ u8 bl_power;
-+#endif
-+ bool lcdcon_is_backlight;
-+ u8 saved_lcdcon;
-+
-+ u8 default_bpp;
- unsigned int default_lcdcon2;
- unsigned int default_dmacon;
- void (*atmel_lcdfb_power_control)(int on);
-diff -urN -x CVS linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-01 22:06:40.000000000 +0200
-@@ -34,8 +34,7 @@
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
-
--#include <asm/arch/hardware.h>
--#include <asm/arch/at91_pio.h>
-+#include <asm/hardware.h>
- #include <asm/arch/gpio.h>
-
- #include "../codecs/wm8731.h"
-@@ -48,13 +47,6 @@
- #define DBG(x...)
- #endif
-
--#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
--#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
--#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
--#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
--#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
--#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
--
- static struct clk *pck1_clk;
- static struct clk *pllb_clk;
-
-@@ -277,7 +269,6 @@
- static int __init eti_b1_init(void)
- {
- int ret;
-- u32 ssc_pio_lines;
- struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
-
- if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -311,19 +302,12 @@
- goto fail_io_unmap;
- }
-
-- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
-- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
--
-- /* Reset all PIO registers and assign lines to peripheral A */
-- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
-+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
-+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
-+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
-+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
-+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
-+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
-
- /*
- * Set PCK1 parent to PLLB and its rate to 12 Mhz.
-diff -urN -x CVS linux-2.6.24/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c
---- linux-2.6.24/sound/spi/at73c213.c 2008-03-01 22:02:18.000000000 +0200
-+++ linux-2.6/sound/spi/at73c213.c 2008-02-26 20:37:07.000000000 +0200
-@@ -112,7 +112,11 @@
- static struct snd_pcm_hardware snd_at73c213_playback_hw = {
- .info = SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+#ifdef __BIG_ENDIAN
- .formats = SNDRV_PCM_FMTBIT_S16_BE,
-+#else
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
-+#endif
- .rates = SNDRV_PCM_RATE_CONTINUOUS,
- .rate_min = 8000, /* Replaced by chip->bitrate later. */
- .rate_max = 50000, /* Replaced by chip->bitrate later. */