summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/Linux/kernel-patches-2.6.20.4
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/Linux/kernel-patches-2.6.20.4')
-rw-r--r--target/device/Atmel/Linux/kernel-patches-2.6.20.4/linux-2.6.20.4-atmel.patch26777
1 files changed, 26777 insertions, 0 deletions
diff --git a/target/device/Atmel/Linux/kernel-patches-2.6.20.4/linux-2.6.20.4-atmel.patch b/target/device/Atmel/Linux/kernel-patches-2.6.20.4/linux-2.6.20.4-atmel.patch
new file mode 100644
index 000000000..9cd333429
--- /dev/null
+++ b/target/device/Atmel/Linux/kernel-patches-2.6.20.4/linux-2.6.20.4-atmel.patch
@@ -0,0 +1,26777 @@
+diff -urN linux-2.6.20.4-0rig/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.20.4-atmel/arch/arm/configs/at91sam9263ek_defconfig
+--- linux-2.6.20.4-0rig/arch/arm/configs/at91sam9263ek_defconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/configs/at91sam9263ek_defconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,1184 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.20-rc1
++# Mon Jan 8 16:06:54 2007
++#
++CONFIG_ARM=y
++# CONFIG_GENERIC_TIME is not set
++CONFIG_MMU=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++CONFIG_ARCH_AT91SAM9263=y
++
++#
++# AT91SAM9263 Board Type
++#
++CONFIG_MACH_AT91SAM9263EK=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_AT91_DATAFLASH_CARD=y
++# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++
++#
++# Bus support
++#
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
++# CONFIG_XIP_KERNEL is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++# CONFIG_APM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_TSDEV=y
++CONFIG_INPUT_TSDEV_SCREEN_X=240
++CONFIG_INPUT_TSDEV_SCREEN_Y=320
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_AT91=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_PCA is not set
++# CONFIG_I2C_PCA_ISA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Misc devices
++#
++# CONFIG_TIFM_CORE is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_FIRMWARE_EDID is not set
++CONFIG_FB=y
++# CONFIG_FB_CFB_FILLRECT is not set
++# CONFIG_FB_CFB_COPYAREA is not set
++# CONFIG_FB_CFB_IMAGEBLIT is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++
++#
++# Logo configuration
++#
++# CONFIG_LOGO is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# HID Devices
++#
++CONFIG_HID=y
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_BANDWIDTH is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_MULTITHREAD_PROBE is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++# CONFIG_USB_AIPTEK is not set
++# CONFIG_USB_WACOM is not set
++# CONFIG_USB_ACECAD is not set
++# CONFIG_USB_KBTAB is not set
++# CONFIG_USB_POWERMATE is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
++# CONFIG_USB_XPAD is not set
++# CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++CONFIG_USB_ZERO=m
++# CONFIG_USB_ETH is not set
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_AT91=m
++# CONFIG_MMC_TIFM_SD is not set
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_ERRORS is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_IOMAP_COPY=y
+diff -urN linux-2.6.20.4-0rig/arch/arm/configs/csb337_defconfig linux-2.6.20.4-atmel/arch/arm/configs/csb337_defconfig
+--- linux-2.6.20.4-0rig/arch/arm/configs/csb337_defconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/configs/csb337_defconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -355,10 +355,12 @@
+ # Mapping drivers for chip access
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_ARM_INTEGRATOR is not set
+ # CONFIG_MTD_PLATRAM is not set
+-CONFIG_MTD_CSB337=y
+
+ #
+ # Self-contained MTD device drivers
+diff -urN linux-2.6.20.4-0rig/arch/arm/configs/csb637_defconfig linux-2.6.20.4-atmel/arch/arm/configs/csb637_defconfig
+--- linux-2.6.20.4-0rig/arch/arm/configs/csb637_defconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/configs/csb637_defconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -355,10 +355,12 @@
+ # Mapping drivers for chip access
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_ARM_INTEGRATOR is not set
+ # CONFIG_MTD_PLATRAM is not set
+-CONFIG_MTD_CSB637=y
+
+ #
+ # Self-contained MTD device drivers
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200.c 2007-03-24 16:39:15.000000000 +0100
+@@ -117,6 +117,36 @@
+ .pmc_mask = 1 << AT91RM9200_ID_PIOD,
+ .type = CLK_TYPE_PERIPHERAL,
+ };
++static struct clk tc0_clk = {
++ .name = "tc0_clk",
++ .pmc_mask = 1 << AT91RM9200_ID_TC0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc1_clk = {
++ .name = "tc1_clk",
++ .pmc_mask = 1 << AT91RM9200_ID_TC1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc2_clk = {
++ .name = "tc2_clk",
++ .pmc_mask = 1 << AT91RM9200_ID_TC2,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc3_clk = {
++ .name = "tc3_clk",
++ .pmc_mask = 1 << AT91RM9200_ID_TC3,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc4_clk = {
++ .name = "tc4_clk",
++ .pmc_mask = 1 << AT91RM9200_ID_TC4,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc5_clk = {
++ .name = "tc5_clk",
++ .pmc_mask = 1 << AT91RM9200_ID_TC5,
++ .type = CLK_TYPE_PERIPHERAL,
++};
+
+ static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+@@ -132,7 +162,12 @@
+ &twi_clk,
+ &spi_clk,
+ // ssc 0 .. ssc2
+- // tc0 .. tc5
++ &tc0_clk,
++ &tc1_clk,
++ &tc2_clk,
++ &tc3_clk,
++ &tc4_clk,
++ &tc5_clk,
+ &ohci_clk,
+ &ether_clk,
+ // irq0 .. irq6
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-03-24 16:39:15.000000000 +0100
+@@ -315,7 +315,7 @@
+ .num_resources = ARRAY_SIZE(mmc_resources),
+ };
+
+-void __init at91_add_device_mmc(struct at91_mmc_data *data)
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+ {
+ if (!data)
+ return;
+@@ -361,7 +361,7 @@
+ platform_device_register(&at91rm9200_mmc_device);
+ }
+ #else
+-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+ #endif
+
+
+@@ -480,7 +480,18 @@
+ * SPI
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
++#define SPI_DEVNAME "at91_spi"
++
++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
++#define SPI_DEVNAME "at91_spi"
++
++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
++#define SPI_DEVNAME "atmel_spi"
++
++#endif
++
++#ifdef SPI_DEVNAME
+ static u64 spi_dmamask = 0xffffffffUL;
+
+ static struct resource spi_resources[] = {
+@@ -497,7 +508,7 @@
+ };
+
+ static struct platform_device at91rm9200_spi_device = {
+- .name = "at91_spi",
++ .name = SPI_DEVNAME,
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+@@ -594,6 +605,10 @@
+
+ void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+ {
++ /* Enable GPIO to access the LEDs */
++ at91_set_gpio_output(cpu_led, 1);
++ at91_set_gpio_output(timer_led, 1);
++
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+ }
+@@ -602,6 +617,32 @@
+ #endif
+
+
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_time.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_time.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_time.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_time.c 2007-03-24 16:39:15.000000000 +0100
+@@ -38,7 +38,8 @@
+ * The ST_CRTR is updated asynchronously to the master clock. It is therefore
+ * necessary to read it twice (with the same value) to ensure accuracy.
+ */
+-static inline unsigned long read_CRTR(void) {
++static inline unsigned long read_CRTR(void)
++{
+ unsigned long x1, x2;
+
+ do {
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260.c 2007-03-24 16:39:15.000000000 +0100
+@@ -14,6 +14,7 @@
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
++#include <asm/arch/cpu.h>
+ #include <asm/arch/at91sam9260.h>
+ #include <asm/arch/at91_pmc.h>
+ #include <asm/arch/at91_rstc.h>
+@@ -27,7 +28,11 @@
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+- }, {
++ }
++};
++
++static struct map_desc at91sam9260_sram_desc[] __initdata = {
++ {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
+ .length = AT91SAM9260_SRAM0_SIZE,
+@@ -37,7 +42,14 @@
+ .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
+ .length = AT91SAM9260_SRAM1_SIZE,
+ .type = MT_DEVICE,
+- },
++ }
++};
++
++static struct map_desc at91sam9xe_sram_desc[] __initdata = {
++ {
++ .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
++ .type = MT_DEVICE,
++ }
+ };
+
+ /* --------------------------------------------------------------------
+@@ -107,13 +119,28 @@
+ .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+ };
++static struct clk tc0_clk = {
++ .name = "tc0_clk",
++ .pmc_mask = 1 << AT91SAM9260_ID_TC0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc1_clk = {
++ .name = "tc1_clk",
++ .pmc_mask = 1 << AT91SAM9260_ID_TC1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc2_clk = {
++ .name = "tc2_clk",
++ .pmc_mask = 1 << AT91SAM9260_ID_TC2,
++ .type = CLK_TYPE_PERIPHERAL,
++};
+ static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+ };
+-static struct clk ether_clk = {
+- .name = "ether_clk",
++static struct clk macb_clk = {
++ .name = "macb_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+ };
+@@ -137,6 +164,21 @@
+ .pmc_mask = 1 << AT91SAM9260_ID_US5,
+ .type = CLK_TYPE_PERIPHERAL,
+ };
++static struct clk tc3_clk = {
++ .name = "tc3_clk",
++ .pmc_mask = 1 << AT91SAM9260_ID_TC3,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc4_clk = {
++ .name = "tc4_clk",
++ .pmc_mask = 1 << AT91SAM9260_ID_TC4,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc5_clk = {
++ .name = "tc5_clk",
++ .pmc_mask = 1 << AT91SAM9260_ID_TC5,
++ .type = CLK_TYPE_PERIPHERAL,
++};
+
+ static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+@@ -152,14 +194,18 @@
+ &spi0_clk,
+ &spi1_clk,
+ // ssc
+- // tc0 .. tc2
++ &tc0_clk,
++ &tc1_clk,
++ &tc2_clk,
+ &ohci_clk,
+- &ether_clk,
++ &macb_clk,
+ &isi_clk,
+ &usart3_clk,
+ &usart4_clk,
+ &usart5_clk,
+- // tc3 .. tc5
++ &tc3_clk,
++ &tc4_clk,
++ &tc5_clk,
+ // irq0 .. irq2
+ };
+
+@@ -213,7 +259,7 @@
+
+ static void at91sam9260_reset(void)
+ {
+- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ }
+
+
+@@ -221,10 +267,36 @@
+ * AT91SAM9260 processor initialization
+ * -------------------------------------------------------------------- */
+
++static void __init at91sam9xe_initialize(void)
++{
++ unsigned long cidr, sram_size;
++
++ cidr = at91_sys_read(AT91_DBGU_CIDR);
++
++ switch (cidr & AT91_CIDR_SRAMSIZ) {
++ case AT91_CIDR_SRAMSIZ_32K:
++ sram_size = 2 * SZ_16K;
++ break;
++ case AT91_CIDR_SRAMSIZ_16K:
++ default:
++ sram_size = SZ_16K;
++ }
++
++ at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
++ at91sam9xe_sram_desc->length = sram_size;
++
++ iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
++}
++
+ void __init at91sam9260_initialize(unsigned long main_clock)
+ {
+ /* Map peripherals */
+ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
++
++ if (cpu_is_at91sam9xe())
++ at91sam9xe_initialize();
++ else
++ iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
+ at91_arch_reset = at91sam9260_reset;
+ at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260_devices.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260_devices.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260_devices.c 2007-03-24 16:39:15.000000000 +0100
+@@ -128,7 +128,7 @@
+
+ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+ static u64 eth_dmamask = 0xffffffffUL;
+-static struct eth_platform_data eth_data;
++static struct at91_eth_data eth_data;
+
+ static struct resource eth_resources[] = {
+ [0] = {
+@@ -155,7 +155,7 @@
+ .num_resources = ARRAY_SIZE(eth_resources),
+ };
+
+-void __init at91_add_device_eth(struct eth_platform_data *data)
++void __init at91_add_device_eth(struct at91_eth_data *data)
+ {
+ if (!data)
+ return;
+@@ -192,7 +192,7 @@
+ platform_device_register(&at91sam9260_eth_device);
+ }
+ #else
+-void __init at91_add_device_eth(struct eth_platform_data *data) {}
++void __init at91_add_device_eth(struct at91_eth_data *data) {}
+ #endif
+
+
+@@ -229,7 +229,7 @@
+ .num_resources = ARRAY_SIZE(mmc_resources),
+ };
+
+-void __init at91_add_device_mmc(struct at91_mmc_data *data)
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+ {
+ if (!data)
+ return;
+@@ -275,7 +275,7 @@
+ platform_device_register(&at91sam9260_mmc_device);
+ }
+ #else
+-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+ #endif
+
+
+@@ -515,6 +515,10 @@
+
+ void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+ {
++ /* Enable GPIO to access the LEDs */
++ at91_set_gpio_output(cpu_led, 1);
++ at91_set_gpio_output(timer_led, 1);
++
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+ }
+@@ -523,6 +527,32 @@
+ #endif
+
+
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261.c 2007-03-24 16:39:15.000000000 +0100
+@@ -97,6 +97,21 @@
+ .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+ };
++static struct clk tc0_clk = {
++ .name = "tc0_clk",
++ .pmc_mask = 1 << AT91SAM9261_ID_TC0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc1_clk = {
++ .name = "tc1_clk",
++ .pmc_mask = 1 << AT91SAM9261_ID_TC1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tc2_clk = {
++ .name = "tc2_clk",
++ .pmc_mask = 1 << AT91SAM9261_ID_TC2,
++ .type = CLK_TYPE_PERIPHERAL,
++};
+ static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_UHP,
+@@ -121,7 +136,9 @@
+ &spi0_clk,
+ &spi1_clk,
+ // ssc 0 .. ssc2
+- // tc0 .. tc2
++ &tc0_clk,
++ &tc1_clk,
++ &tc2_clk,
+ &ohci_clk,
+ &lcdc_clk,
+ // irq0 .. irq2
+@@ -208,7 +225,7 @@
+
+ static void at91sam9261_reset(void)
+ {
+- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ }
+
+
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261_devices.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261_devices.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261_devices.c 2007-03-24 16:39:15.000000000 +0100
+@@ -14,6 +14,9 @@
+ #include <asm/mach/map.h>
+
+ #include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <video/atmel_lcdc.h>
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+@@ -159,7 +162,7 @@
+ .num_resources = ARRAY_SIZE(mmc_resources),
+ };
+
+-void __init at91_add_device_mmc(struct at91_mmc_data *data)
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+ {
+ if (!data)
+ return;
+@@ -192,7 +195,7 @@
+ platform_device_register(&at91sam9261_mmc_device);
+ }
+ #else
+-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+ #endif
+
+
+@@ -345,7 +348,7 @@
+ .num_resources = ARRAY_SIZE(spi0_resources),
+ };
+
+-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA28, AT91_PIN_PA6 };
+
+ static struct resource spi1_resources[] = {
+ [0] = {
+@@ -430,9 +433,9 @@
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+ static u64 lcdc_dmamask = 0xffffffffUL;
+-static struct at91fb_info lcdc_data;
++static struct atmel_lcdfb_info lcdc_data;
+
+ static struct resource lcdc_resources[] = {
+ [0] = {
+@@ -455,18 +458,18 @@
+ };
+
+ static struct platform_device at91_lcdc_device = {
+- .name = "at91-fb",
+- .id = 0,
+- .dev = {
+- .dma_mask = &lcdc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
+- .platform_data = &lcdc_data,
++ .name = "atmel_lcdfb",
++ .id = 0,
++ .dev = {
++ .dma_mask = &lcdc_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ };
+
+-void __init at91_add_device_lcdc(struct at91fb_info *data)
++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+ {
+ if (!data) {
+ return;
+@@ -499,7 +502,7 @@
+ platform_device_register(&at91_lcdc_device);
+ }
+ #else
+-void __init at91_add_device_lcdc(struct at91fb_info *data) {}
++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+ #endif
+
+
+@@ -513,6 +516,10 @@
+
+ void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+ {
++ /* Enable GPIO to access the LEDs */
++ at91_set_gpio_output(cpu_led, 1);
++ at91_set_gpio_output(timer_led, 1);
++
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+ }
+@@ -521,6 +528,32 @@
+ #endif
+
+
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,313 @@
++/*
++ * arch/arm/mach-at91rm9200/at91sam9263.c
++ *
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/arch/at91sam9263.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_rstc.h>
++
++#include "generic.h"
++#include "clock.h"
++
++static struct map_desc at91sam9263_io_desc[] __initdata = {
++ {
++ .virtual = AT91_VA_BASE_SYS,
++ .pfn = __phys_to_pfn(AT91_BASE_SYS),
++ .length = SZ_16K,
++ .type = MT_DEVICE,
++ }, {
++ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
++ .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
++ .length = AT91SAM9263_SRAM0_SIZE,
++ .type = MT_DEVICE,
++ }, {
++ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
++ .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
++ .length = AT91SAM9263_SRAM1_SIZE,
++ .type = MT_DEVICE,
++ },
++};
++
++/* --------------------------------------------------------------------
++ * Clocks
++ * -------------------------------------------------------------------- */
++
++/*
++ * The peripheral clocks.
++ */
++static struct clk pioA_clk = {
++ .name = "pioA_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk pioB_clk = {
++ .name = "pioB_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk pioCDE_clk = {
++ .name = "pioCDE_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart0_clk = {
++ .name = "usart0_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_US0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart1_clk = {
++ .name = "usart1_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_US1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart2_clk = {
++ .name = "usart2_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_US2,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mmc0_clk = {
++ .name = "mci0_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mmc1_clk = {
++ .name = "mci1_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk twi_clk = {
++ .name = "twi_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_TWI,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi0_clk = {
++ .name = "spi0_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi1_clk = {
++ .name = "spi1_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tcb_clk = {
++ .name = "tcb_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_TCB,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk macb_clk = {
++ .name = "macb_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk udc_clk = {
++ .name = "udc_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_UDP,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk isi_clk = {
++ .name = "isi_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk lcdc_clk = {
++ .name = "lcdc_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk ohci_clk = {
++ .name = "ohci_clk",
++ .pmc_mask = 1 << AT91SAM9263_ID_UHP,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++
++static struct clk *periph_clocks[] __initdata = {
++ &pioA_clk,
++ &pioB_clk,
++ &pioCDE_clk,
++ &usart0_clk,
++ &usart1_clk,
++ &usart2_clk,
++ &mmc0_clk,
++ &mmc1_clk,
++ // can
++ &twi_clk,
++ &spi0_clk,
++ &spi1_clk,
++ // ssc0 .. ssc1
++ // ac97
++ &tcb_clk,
++ // pwmc
++ &macb_clk,
++ // 2dge
++ &udc_clk,
++ &isi_clk,
++ &lcdc_clk,
++ // dma
++ &ohci_clk,
++ // irq0 .. irq1
++};
++
++/*
++ * The four programmable clocks.
++ * You must configure pin multiplexing to bring these signals out.
++ */
++static struct clk pck0 = {
++ .name = "pck0",
++ .pmc_mask = AT91_PMC_PCK0,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 0,
++};
++static struct clk pck1 = {
++ .name = "pck1",
++ .pmc_mask = AT91_PMC_PCK1,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 1,
++};
++static struct clk pck2 = {
++ .name = "pck2",
++ .pmc_mask = AT91_PMC_PCK2,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 2,
++};
++static struct clk pck3 = {
++ .name = "pck3",
++ .pmc_mask = AT91_PMC_PCK3,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 3,
++};
++
++static void __init at91sam9263_register_clocks(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
++ clk_register(periph_clocks[i]);
++
++ clk_register(&pck0);
++ clk_register(&pck1);
++ clk_register(&pck2);
++ clk_register(&pck3);
++}
++
++/* --------------------------------------------------------------------
++ * GPIO
++ * -------------------------------------------------------------------- */
++
++static struct at91_gpio_bank at91sam9263_gpio[] = {
++ {
++ .id = AT91SAM9263_ID_PIOA,
++ .offset = AT91_PIOA,
++ .clock = &pioA_clk,
++ }, {
++ .id = AT91SAM9263_ID_PIOB,
++ .offset = AT91_PIOB,
++ .clock = &pioB_clk,
++ }, {
++ .id = AT91SAM9263_ID_PIOCDE,
++ .offset = AT91_PIOC,
++ .clock = &pioCDE_clk,
++ }, {
++ .id = AT91SAM9263_ID_PIOCDE,
++ .offset = AT91_PIOD,
++ .clock = &pioCDE_clk,
++ }, {
++ .id = AT91SAM9263_ID_PIOCDE,
++ .offset = AT91_PIOE,
++ .clock = &pioCDE_clk,
++ }
++};
++
++static void at91sam9263_reset(void)
++{
++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
++}
++
++
++/* --------------------------------------------------------------------
++ * AT91SAM9263 processor initialization
++ * -------------------------------------------------------------------- */
++
++void __init at91sam9263_initialize(unsigned long main_clock)
++{
++ /* Map peripherals */
++ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
++
++ at91_arch_reset = at91sam9263_reset;
++ at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
++
++ /* Init clock subsystem */
++ at91_clock_init(main_clock);
++
++ /* Register the processor-specific clocks */
++ at91sam9263_register_clocks();
++
++ /* Register GPIO subsystem */
++ at91_gpio_init(at91sam9263_gpio, 5);
++}
++
++/* --------------------------------------------------------------------
++ * Interrupt initialization
++ * -------------------------------------------------------------------- */
++
++/*
++ * The default interrupt priority levels (0 = lowest, 7 = highest).
++ */
++static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
++ 7, /* Advanced Interrupt Controller (FIQ) */
++ 7, /* System Peripherals */
++ 0, /* Parallel IO Controller A */
++ 0, /* Parallel IO Controller B */
++ 0, /* Parallel IO Controller C, D and E */
++ 0,
++ 0,
++ 6, /* USART 0 */
++ 6, /* USART 1 */
++ 6, /* USART 2 */
++ 0, /* Multimedia Card Interface 0 */
++ 0, /* Multimedia Card Interface 1 */
++ 4, /* CAN */
++ 0, /* Two-Wire Interface */
++ 6, /* Serial Peripheral Interface 0 */
++ 6, /* Serial Peripheral Interface 1 */
++ 5, /* Serial Synchronous Controller 0 */
++ 5, /* Serial Synchronous Controller 1 */
++ 6, /* AC97 Controller */
++ 0, /* Timer Counter 0, 1 and 2 */
++ 0, /* Pulse Width Modulation Controller */
++ 3, /* Ethernet */
++ 0,
++ 0, /* 2D Graphic Engine */
++ 3, /* USB Device Port */
++ 0, /* Image Sensor Interface */
++ 3, /* LDC Controller */
++ 0, /* DMA Controller */
++ 0,
++ 3, /* USB Host port */
++ 0, /* Advanced Interrupt Controller (IRQ0) */
++ 0, /* Advanced Interrupt Controller (IRQ1) */
++};
++
++void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
++{
++ if (!priority)
++ priority = at91sam9263_default_irq_priority;
++
++ /* Initialize the AIC interrupt controller */
++ at91_aic_init(priority);
++
++ /* Enable GPIO interrupts */
++ at91_gpio_irq_setup();
++}
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263_devices.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263_devices.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263_devices.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,918 @@
++/*
++ * arch/arm/mach-at91rm9200/at91sam9263_devices.c
++ *
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam9263.h>
++#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91sam9263_matrix.h>
++
++#include "generic.h"
++
++#define SZ_512 0x00000200
++#define SZ_256 0x00000100
++#define SZ_16 0x00000010
++
++/* --------------------------------------------------------------------
++ * USB Host
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
++static u64 ohci_dmamask = 0xffffffffUL;
++static struct at91_usbh_data usbh_data;
++
++static struct resource usbh_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_UHP_BASE,
++ .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_UHP,
++ .end = AT91SAM9263_ID_UHP,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91_usbh_device = {
++ .name = "at91_ohci",
++ .id = -1,
++ .dev = {
++ .dma_mask = &ohci_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &usbh_data,
++ },
++ .resource = usbh_resources,
++ .num_resources = ARRAY_SIZE(usbh_resources),
++};
++
++void __init at91_add_device_usbh(struct at91_usbh_data *data)
++{
++ int i;
++
++ if (!data)
++ return;
++
++ /* Enable VBus control for UHP ports */
++ for (i = 0; i < data->ports; i++) {
++ if (data->vbus_pin[i])
++ at91_set_gpio_output(data->vbus_pin[i], 0);
++ }
++
++ usbh_data = *data;
++ platform_device_register(&at91_usbh_device);
++}
++#else
++void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * USB Device (Gadget)
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_USB_GADGET_AT91
++static struct at91_udc_data udc_data;
++
++static struct resource udc_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_UDP,
++ .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_UDP,
++ .end = AT91SAM9263_ID_UDP,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91_udc_device = {
++ .name = "at91_udc",
++ .id = -1,
++ .dev = {
++ .platform_data = &udc_data,
++ },
++ .resource = udc_resources,
++ .num_resources = ARRAY_SIZE(udc_resources),
++};
++
++void __init at91_add_device_udc(struct at91_udc_data *data)
++{
++ if (!data)
++ return;
++
++ if (data->vbus_pin) {
++ at91_set_gpio_input(data->vbus_pin, 0);
++ at91_set_deglitch(data->vbus_pin, 1);
++ }
++
++ /* Pullup pin is handled internally by USB device peripheral */
++
++ udc_data = *data;
++ platform_device_register(&at91_udc_device);
++}
++#else
++void __init at91_add_device_udc(struct at91_udc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * Ethernet
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
++static u64 eth_dmamask = 0xffffffffUL;
++static struct at91_eth_data eth_data;
++
++static struct resource eth_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_EMAC,
++ .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_EMAC,
++ .end = AT91SAM9263_ID_EMAC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_eth_device = {
++ .name = "macb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &eth_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &eth_data,
++ },
++ .resource = eth_resources,
++ .num_resources = ARRAY_SIZE(eth_resources),
++};
++
++void __init at91_add_device_eth(struct at91_eth_data *data)
++{
++ if (!data)
++ return;
++
++ if (data->phy_irq_pin) {
++ at91_set_gpio_input(data->phy_irq_pin, 0);
++ at91_set_deglitch(data->phy_irq_pin, 1);
++ }
++
++ /* Pins used for MII and RMII */
++ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
++ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
++ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
++ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
++ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
++ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
++ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
++ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
++ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
++ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
++
++ if (!data->is_rmii) {
++ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
++ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
++ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
++ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
++ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
++ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
++ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
++ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
++ }
++
++ eth_data = *data;
++ platform_device_register(&at91sam9263_eth_device);
++}
++#else
++void __init at91_add_device_eth(struct at91_eth_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * MMC / SD
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
++static u64 mmc_dmamask = 0xffffffffUL;
++static struct at91_mmc_data mmc0_data, mmc1_data;
++
++static struct resource mmc0_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_MCI0,
++ .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_MCI0,
++ .end = AT91SAM9263_ID_MCI0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_mmc0_device = {
++ .name = "at91_mci",
++ .id = 0,
++ .dev = {
++ .dma_mask = &mmc_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &mmc0_data,
++ },
++ .resource = mmc0_resources,
++ .num_resources = ARRAY_SIZE(mmc0_resources),
++};
++
++static struct resource mmc1_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_MCI1,
++ .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_MCI1,
++ .end = AT91SAM9263_ID_MCI1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_mmc1_device = {
++ .name = "at91_mci",
++ .id = 1,
++ .dev = {
++ .dma_mask = &mmc_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &mmc1_data,
++ },
++ .resource = mmc1_resources,
++ .num_resources = ARRAY_SIZE(mmc1_resources),
++};
++
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
++{
++ if (!data)
++ return;
++
++ /* input/irq */
++ if (data->det_pin) {
++ at91_set_gpio_input(data->det_pin, 1);
++ at91_set_deglitch(data->det_pin, 1);
++ }
++ if (data->wp_pin)
++ at91_set_gpio_input(data->wp_pin, 1);
++ if (data->vcc_pin)
++ at91_set_gpio_output(data->vcc_pin, 0);
++
++ if (mmc_id == 0) { /* MCI0 */
++ /* CLK */
++ at91_set_A_periph(AT91_PIN_PA12, 0);
++
++ if (data->slot_b) {
++ /* CMD */
++ at91_set_A_periph(AT91_PIN_PA16, 1);
++
++ /* DAT0, maybe DAT1..DAT3 */
++ at91_set_A_periph(AT91_PIN_PA17, 1);
++ if (data->wire4) {
++ at91_set_A_periph(AT91_PIN_PA18, 1);
++ at91_set_A_periph(AT91_PIN_PA19, 1);
++ at91_set_A_periph(AT91_PIN_PA20, 1);
++ }
++ } else {
++ /* CMD */
++ at91_set_A_periph(AT91_PIN_PA1, 1);
++
++ /* DAT0, maybe DAT1..DAT3 */
++ at91_set_A_periph(AT91_PIN_PA0, 1);
++ if (data->wire4) {
++ at91_set_A_periph(AT91_PIN_PA3, 1);
++ at91_set_A_periph(AT91_PIN_PA4, 1);
++ at91_set_A_periph(AT91_PIN_PA5, 1);
++ }
++ }
++
++ mmc0_data = *data;
++ at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
++ platform_device_register(&at91sam9263_mmc0_device);
++ } else { /* MCI1 */
++ /* CLK */
++ at91_set_A_periph(AT91_PIN_PA6, 0);
++
++ if (data->slot_b) {
++ /* CMD */
++ at91_set_A_periph(AT91_PIN_PA21, 1);
++
++ /* DAT0, maybe DAT1..DAT3 */
++ at91_set_A_periph(AT91_PIN_PA22, 1);
++ if (data->wire4) {
++ at91_set_A_periph(AT91_PIN_PA23, 1);
++ at91_set_A_periph(AT91_PIN_PA24, 1);
++ at91_set_A_periph(AT91_PIN_PA25, 1);
++ }
++ } else {
++ /* CMD */
++ at91_set_A_periph(AT91_PIN_PA7, 1);
++
++ /* DAT0, maybe DAT1..DAT3 */
++ at91_set_A_periph(AT91_PIN_PA8, 1);
++ if (data->wire4) {
++ at91_set_A_periph(AT91_PIN_PA9, 1);
++ at91_set_A_periph(AT91_PIN_PA10, 1);
++ at91_set_A_periph(AT91_PIN_PA11, 1);
++ }
++ }
++
++ mmc1_data = *data;
++ at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
++ platform_device_register(&at91sam9263_mmc1_device);
++ }
++}
++#else
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * NAND / SmartMedia
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
++static struct at91_nand_data nand_data;
++
++#define NAND_BASE AT91_CHIPSELECT_3
++
++static struct resource nand_resources[] = {
++ {
++ .start = NAND_BASE,
++ .end = NAND_BASE + SZ_256M - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91sam9263_nand_device = {
++ .name = "at91_nand",
++ .id = -1,
++ .dev = {
++ .platform_data = &nand_data,
++ },
++ .resource = nand_resources,
++ .num_resources = ARRAY_SIZE(nand_resources),
++};
++
++void __init at91_add_device_nand(struct at91_nand_data *data)
++{
++ unsigned long csa, mode;
++
++ if (!data)
++ return;
++
++ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
++ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
++
++ /* set the bus interface characteristics */
++ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
++ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
++
++ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
++ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
++
++ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
++
++ if (data->bus_width_16)
++ mode = AT91_SMC_DBW_16;
++ else
++ mode = AT91_SMC_DBW_8;
++ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
++
++ /* enable pin */
++ if (data->enable_pin)
++ at91_set_gpio_output(data->enable_pin, 1);
++
++ /* ready/busy pin */
++ if (data->rdy_pin)
++ at91_set_gpio_input(data->rdy_pin, 1);
++
++ /* card detect pin */
++ if (data->det_pin)
++ at91_set_gpio_input(data->det_pin, 1);
++
++ nand_data = *data;
++ platform_device_register(&at91sam9263_nand_device);
++}
++#else
++void __init at91_add_device_nand(struct at91_nand_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * TWI (i2c)
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
++
++static struct resource twi_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_TWI,
++ .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_TWI,
++ .end = AT91SAM9263_ID_TWI,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_twi_device = {
++ .name = "at91_i2c",
++ .id = -1,
++ .resource = twi_resources,
++ .num_resources = ARRAY_SIZE(twi_resources),
++};
++
++void __init at91_add_device_i2c(void)
++{
++ /* pins used for TWI interface */
++ at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
++ at91_set_multi_drive(AT91_PIN_PB4, 1);
++
++ at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
++ at91_set_multi_drive(AT91_PIN_PB5, 1);
++
++ platform_device_register(&at91sam9263_twi_device);
++}
++#else
++void __init at91_add_device_i2c(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * SPI
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
++static u64 spi_dmamask = 0xffffffffUL;
++
++static struct resource spi0_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_SPI0,
++ .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_SPI0,
++ .end = AT91SAM9263_ID_SPI0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_spi0_device = {
++ .name = "atmel_spi",
++ .id = 0,
++ .dev = {
++ .dma_mask = &spi_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = spi0_resources,
++ .num_resources = ARRAY_SIZE(spi0_resources),
++};
++
++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
++
++static struct resource spi1_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_SPI1,
++ .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_SPI1,
++ .end = AT91SAM9263_ID_SPI1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_spi1_device = {
++ .name = "atmel_spi",
++ .id = 1,
++ .dev = {
++ .dma_mask = &spi_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = spi1_resources,
++ .num_resources = ARRAY_SIZE(spi1_resources),
++};
++
++static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
++
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
++{
++ int i;
++ unsigned long cs_pin;
++ short enable_spi0 = 0;
++ short enable_spi1 = 0;
++
++ /* Choose SPI chip-selects */
++ for (i = 0; i < nr_devices; i++) {
++ if (devices[i].controller_data)
++ cs_pin = (unsigned long) devices[i].controller_data;
++ else if (devices[i].bus_num == 0)
++ cs_pin = spi0_standard_cs[devices[i].chip_select];
++ else
++ cs_pin = spi1_standard_cs[devices[i].chip_select];
++
++ if (devices[i].bus_num == 0)
++ enable_spi0 = 1;
++ else
++ enable_spi1 = 1;
++
++ /* enable chip-select pin */
++ at91_set_gpio_output(cs_pin, 1);
++
++ /* pass chip-select pin to driver */
++ devices[i].controller_data = (void *) cs_pin;
++ }
++
++ spi_register_board_info(devices, nr_devices);
++
++ /* Configure SPI bus(es) */
++ if (enable_spi0) {
++ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
++ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
++ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
++
++ at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
++ platform_device_register(&at91sam9263_spi0_device);
++ }
++ if (enable_spi1) {
++ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
++ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
++ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
++
++ at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
++ platform_device_register(&at91sam9263_spi1_device);
++ }
++}
++#else
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * LCD Controller
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static u64 lcdc_dmamask = 0xffffffffUL;
++static struct atmel_lcdfb_info lcdc_data;
++
++static struct resource lcdc_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_LCDC_BASE,
++ .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_LCDC,
++ .end = AT91SAM9263_ID_LCDC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91_lcdc_device = {
++ .name = "atmel_lcdfb",
++ .id = 0,
++ .dev = {
++ .dma_mask = &lcdc_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &lcdc_data,
++ },
++ .resource = lcdc_resources,
++ .num_resources = ARRAY_SIZE(lcdc_resources),
++};
++
++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
++{
++ if (!data) {
++ return;
++ }
++
++ /* configure PIO for LCDC */
++ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
++ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
++ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
++ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
++ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
++ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
++ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
++ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
++ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
++ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
++ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
++ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
++ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
++ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
++ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
++ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
++ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
++ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
++ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
++ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
++ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
++ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
++
++ lcdc_data = *data;
++ platform_device_register(&at91_lcdc_device);
++}
++#else
++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * LEDs
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_LEDS)
++u8 at91_leds_cpu;
++u8 at91_leds_timer;
++
++void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++{
++ /* Enable GPIO to access the LEDs */
++ at91_set_gpio_output(cpu_led, 1);
++ at91_set_gpio_output(timer_led, 1);
++
++ at91_leds_cpu = cpu_led;
++ at91_leds_timer = timer_led;
++}
++#else
++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++#endif
++
++
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * UART
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SERIAL_ATMEL)
++
++static struct resource dbgu_resources[] = {
++ [0] = {
++ .start = AT91_VA_BASE_SYS + AT91_DBGU,
++ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91_ID_SYS,
++ .end = AT91_ID_SYS,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data dbgu_data = {
++ .use_dma_tx = 0,
++ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
++ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
++};
++
++static struct platform_device at91sam9263_dbgu_device = {
++ .name = "atmel_usart",
++ .id = 0,
++ .dev = {
++ .platform_data = &dbgu_data,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = dbgu_resources,
++ .num_resources = ARRAY_SIZE(dbgu_resources),
++};
++
++static inline void configure_dbgu_pins(void)
++{
++ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
++ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
++}
++
++static struct resource uart0_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_US0,
++ .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_US0,
++ .end = AT91SAM9263_ID_US0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data uart0_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++
++static struct platform_device at91sam9263_uart0_device = {
++ .name = "atmel_usart",
++ .id = 1,
++ .dev = {
++ .platform_data = &uart0_data,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = uart0_resources,
++ .num_resources = ARRAY_SIZE(uart0_resources),
++};
++
++static inline void configure_usart0_pins(void)
++{
++ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
++ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
++ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
++ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
++}
++
++static struct resource uart1_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_US1,
++ .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_US1,
++ .end = AT91SAM9263_ID_US1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data uart1_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++
++static struct platform_device at91sam9263_uart1_device = {
++ .name = "atmel_usart",
++ .id = 2,
++ .dev = {
++ .platform_data = &uart1_data,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = uart1_resources,
++ .num_resources = ARRAY_SIZE(uart1_resources),
++};
++
++static inline void configure_usart1_pins(void)
++{
++ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
++ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
++ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
++ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
++}
++
++static struct resource uart2_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_US2,
++ .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_US2,
++ .end = AT91SAM9263_ID_US2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data uart2_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++
++static struct platform_device at91sam9263_uart2_device = {
++ .name = "atmel_usart",
++ .id = 3,
++ .dev = {
++ .platform_data = &uart2_data,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = uart2_resources,
++ .num_resources = ARRAY_SIZE(uart2_resources),
++};
++
++static inline void configure_usart2_pins(void)
++{
++ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
++ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
++ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
++ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
++}
++
++struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++struct platform_device *atmel_default_console_device; /* the serial console device */
++
++void __init at91_init_serial(struct at91_uart_config *config)
++{
++ int i;
++
++ /* Fill in list of supported UARTs */
++ for (i = 0; i < config->nr_tty; i++) {
++ switch (config->tty_map[i]) {
++ case 0:
++ configure_usart0_pins();
++ at91_uarts[i] = &at91sam9263_uart0_device;
++ at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
++ break;
++ case 1:
++ configure_usart1_pins();
++ at91_uarts[i] = &at91sam9263_uart1_device;
++ at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
++ break;
++ case 2:
++ configure_usart2_pins();
++ at91_uarts[i] = &at91sam9263_uart2_device;
++ at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
++ break;
++ case 3:
++ configure_dbgu_pins();
++ at91_uarts[i] = &at91sam9263_dbgu_device;
++ at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
++ break;
++ default:
++ continue;
++ }
++ at91_uarts[i]->id = i; /* update ID number to mapped ID */
++ }
++
++ /* Set serial console device */
++ if (config->console_tty < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[config->console_tty];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
++void __init at91_add_device_serial(void)
++{
++ int i;
++
++ for (i = 0; i < ATMEL_MAX_UART; i++) {
++ if (at91_uarts[i])
++ platform_device_register(at91_uarts[i]);
++ }
++}
++#else
++void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_add_device_serial(void) {}
++#endif
++
++
++/* -------------------------------------------------------------------- */
++/*
++ * These devices are always present and don't need any board-specific
++ * setup.
++ */
++static int __init at91_add_standard_devices(void)
++{
++ return 0;
++}
++
++arch_initcall(at91_add_standard_devices);
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam926x_time.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam926x_time.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam926x_time.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam926x_time.c 2007-03-24 16:39:15.000000000 +0100
+@@ -30,7 +30,6 @@
+ * Returns number of microseconds since last timer interrupt. Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+- * 'tick' is usecs per jiffy (linux/timex.h).
+ */
+ static unsigned long at91sam926x_gettimeoffset(void)
+ {
+@@ -39,7 +38,7 @@
+
+ elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
+
+- return (unsigned long)(elapsed * 1000000) / LATCH;
++ return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
+ }
+
+ /*
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-carmeva.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-carmeva.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-carmeva.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-carmeva.c 2007-03-24 16:39:15.000000000 +0100
+@@ -134,7 +134,7 @@
+ /* Compact Flash */
+ // at91_add_device_cf(&carmeva_cf_data);
+ /* MMC */
+- at91_add_device_mmc(&carmeva_mmc_data);
++ at91_add_device_mmc(0, &carmeva_mmc_data);
+ }
+
+ MACHINE_START(CARMEVA, "Carmeva")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb337.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb337.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb337.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb337.c 2007-03-24 16:39:15.000000000 +0100
+@@ -24,6 +24,8 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/interrupt.h>
++#include <linux/mtd/physmap.h>
+
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+@@ -58,6 +60,7 @@
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&csb337_uart_config);
+@@ -112,6 +115,91 @@
+ },
+ };
+
++#define CSB_FLASH_BASE AT91_CHIPSELECT_0
++#define CSB_FLASH_SIZE 0x800000
++
++static struct mtd_partition csb_flash_partitions[] = {
++ {
++ .name = "uMON flash",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ .mask_flags = MTD_WRITEABLE, /* read only */
++ }
++};
++
++static struct physmap_flash_data csb_flash_data = {
++ .width = 2,
++ .parts = csb_flash_partitions,
++ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
++};
++
++static struct resource csb_flash_resources[] = {
++ {
++ .start = CSB_FLASH_BASE,
++ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device csb_flash = {
++ .name = "physmap-flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &csb_flash_data,
++ },
++ .resource = csb_flash_resources,
++ .num_resources = ARRAY_SIZE(csb_flash_resources),
++};
++
++static struct at91_gpio_led csb337_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB0,
++ .trigger = "heartbeat",
++ },
++ {
++ .name = "led1",
++ .gpio = AT91_PIN_PB1,
++ .trigger = "timer",
++ },
++ {
++ .name = "led2",
++ .gpio = AT91_PIN_PB2,
++ }
++};
++
++#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
++static irqreturn_t switch_irq_handler(int irq, void *context)
++{
++ return IRQ_HANDLED;
++}
++
++static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
++{
++ int res;
++
++ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
++ if (res == 0)
++ enable_irq_wake(irq);
++}
++
++static void __init csb300_switches(void)
++{
++#ifdef CONFIG_CSB300_WAKE_SW0
++ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */
++ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
++#endif
++#ifdef CONFIG_CSB300_WAKE_SW1
++ at91_set_gpio_input(AT91_PIN_PB28, 1);
++ at91_set_deglitch(AT91_PIN_PB28, 1);
++ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
++#endif
++ /* there's also SW2 at PA21, GPIO or TIOA2 */
++}
++#else
++static void __init csb300_switches(void) {}
++#endif
++
+ static void __init csb337_board_init(void)
+ {
+ /* Serial */
+@@ -130,7 +218,13 @@
+ /* SPI */
+ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+ /* MMC */
+- at91_add_device_mmc(&csb337_mmc_data);
++ at91_add_device_mmc(0, &csb337_mmc_data);
++ /* LEDS */
++ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
++ /* NOR flash */
++ platform_device_register(&csb_flash);
++ /* Switches on CSB300 */
++ csb300_switches();
+ }
+
+ MACHINE_START(CSB337, "Cogent CSB337")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb637.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb637.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb637.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb637.c 2007-03-24 16:39:15.000000000 +0100
+@@ -23,6 +23,7 @@
+ #include <linux/mm.h>
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/mtd/physmap.h>
+
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+@@ -81,6 +82,42 @@
+ .pullup_pin = AT91_PIN_PB1,
+ };
+
++#define CSB_FLASH_BASE AT91_CHIPSELECT_0
++#define CSB_FLASH_SIZE 0x1000000
++
++static struct mtd_partition csb_flash_partitions[] = {
++ {
++ .name = "uMON flash",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ .mask_flags = MTD_WRITEABLE, /* read only */
++ }
++};
++
++static struct physmap_flash_data csb_flash_data = {
++ .width = 2,
++ .parts = csb_flash_partitions,
++ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
++};
++
++static struct resource csb_flash_resources[] = {
++ {
++ .start = CSB_FLASH_BASE,
++ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device csb_flash = {
++ .name = "physmap-flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &csb_flash_data,
++ },
++ .resource = csb_flash_resources,
++ .num_resources = ARRAY_SIZE(csb_flash_resources),
++};
++
+ static void __init csb637_board_init(void)
+ {
+ /* Serial */
+@@ -95,6 +132,8 @@
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
++ /* NOR flash */
++ platform_device_register(&csb_flash);
+ }
+
+ MACHINE_START(CSB637, "Cogent CSB637")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-dk.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-dk.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-dk.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-dk.c 2007-03-24 16:39:15.000000000 +0100
+@@ -73,6 +73,185 @@
+ at91rm9200_init_interrupts(NULL);
+ }
+
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE 0x30000000L
++#define AT91_FB_REG_SIZE 0x200
++#define AT91_FB_VMEM_BASE 0x30200000L
++#define AT91_FB_VMEM_SIZE 0x140000L
++
++static void __init dk_init_video(void)
++{
++ /* NWAIT Signal */
++ at91_set_A_periph(AT91_PIN_PC6, 0);
++
++ /* Initialization of the Static Memory Controller for Chip Select 2 */
++ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
++ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
++ | AT91_SMC_TDF_(1) /* float time */
++ );
++
++ at91_ics1523_init();
++}
++
++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
++ {S1DREG_GPIO_CNF0, 0x00},
++ {S1DREG_GPIO_CNF1, 0x00},
++ {S1DREG_GPIO_CTL0, 0x08},
++ {S1DREG_GPIO_CTL1, 0x00},
++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
++ {S1DREG_LCD_CLK_CNF, 0x00},
++ {S1DREG_CRT_CLK_CNF, 0x00},
++ {S1DREG_MPLUG_CLK_CNF, 0x00},
++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
++ {S1DREG_LCD_DISP_START0, 0x00},
++ {S1DREG_LCD_DISP_START1, 0xC8},
++ {S1DREG_LCD_DISP_START2, 0x00},
++ {S1DREG_LCD_MEM_OFF0, 0x80},
++ {S1DREG_LCD_MEM_OFF1, 0x02},
++ {S1DREG_LCD_PIX_PAN, 0x00},
++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_TV_OUT_CTL, 0x10},
++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_CRT_DISP_START0, 0x00},
++ {S1DREG_CRT_DISP_START1, 0x00},
++ {S1DREG_CRT_DISP_START2, 0x00},
++ {S1DREG_CRT_MEM_OFF0, 0x80},
++ {S1DREG_CRT_MEM_OFF1, 0x02},
++ {S1DREG_CRT_PIX_PAN, 0x00},
++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_LCD_CUR_START, 0x01},
++ {S1DREG_LCD_CUR_XPOS0, 0x00},
++ {S1DREG_LCD_CUR_XPOS1, 0x00},
++ {S1DREG_LCD_CUR_YPOS0, 0x00},
++ {S1DREG_LCD_CUR_YPOS1, 0x00},
++ {S1DREG_LCD_CUR_BCTL0, 0x00},
++ {S1DREG_LCD_CUR_GCTL0, 0x00},
++ {S1DREG_LCD_CUR_RCTL0, 0x00},
++ {S1DREG_LCD_CUR_BCTL1, 0x1F},
++ {S1DREG_LCD_CUR_GCTL1, 0x3F},
++ {S1DREG_LCD_CUR_RCTL1, 0x1F},
++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_CRT_CUR_START, 0x01},
++ {S1DREG_CRT_CUR_XPOS0, 0x00},
++ {S1DREG_CRT_CUR_XPOS1, 0x00},
++ {S1DREG_CRT_CUR_YPOS0, 0x00},
++ {S1DREG_CRT_CUR_YPOS1, 0x00},
++ {S1DREG_CRT_CUR_BCTL0, 0x00},
++ {S1DREG_CRT_CUR_GCTL0, 0x00},
++ {S1DREG_CRT_CUR_RCTL0, 0x00},
++ {S1DREG_CRT_CUR_BCTL1, 0x1F},
++ {S1DREG_CRT_CUR_GCTL1, 0x3F},
++ {S1DREG_CRT_CUR_RCTL1, 0x1F},
++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CC_EXP, 0x00},
++ {S1DREG_BBLT_OP, 0x00},
++ {S1DREG_BBLT_SRC_START0, 0x00},
++ {S1DREG_BBLT_SRC_START1, 0x00},
++ {S1DREG_BBLT_SRC_START2, 0x00},
++ {S1DREG_BBLT_DST_START0, 0x00},
++ {S1DREG_BBLT_DST_START1, 0x00},
++ {S1DREG_BBLT_DST_START2, 0x00},
++ {S1DREG_BBLT_MEM_OFF0, 0x00},
++ {S1DREG_BBLT_MEM_OFF1, 0x00},
++ {S1DREG_BBLT_WIDTH0, 0x00},
++ {S1DREG_BBLT_WIDTH1, 0x00},
++ {S1DREG_BBLT_HEIGHT0, 0x00},
++ {S1DREG_BBLT_HEIGHT1, 0x00},
++ {S1DREG_BBLT_BGC0, 0x00},
++ {S1DREG_BBLT_BGC1, 0x00},
++ {S1DREG_BBLT_FGC0, 0x00},
++ {S1DREG_BBLT_FGC1, 0x00},
++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
++ {S1DREG_LKUP_ADDR, 0x00},
++ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
++ {S1DREG_CPU2MEM_WDOGT, 0x00},
++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
++ .initregs = dk_s1dfb_initregs,
++ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
++ .platform_init_video = dk_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource dk_s1dfb_resource[] = {
++ [0] = { /* video mem */
++ .name = "s1d13806 memory",
++ .start = AT91_FB_VMEM_BASE,
++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = { /* video registers */
++ .name = "s1d13806 registers",
++ .start = AT91_FB_REG_BASE,
++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device dk_s1dfb_device = {
++ .name = "s1d13806fb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &s1dfb_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &dk_s1dfb_pdata,
++ },
++ .resource = dk_s1dfb_resource,
++ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
++};
++
++static void __init dk_add_device_video(void)
++{
++ platform_device_register(&dk_s1dfb_device);
++}
++#else
++static void __init dk_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+@@ -151,7 +330,7 @@
+ #define DK_FLASH_SIZE 0x200000
+
+ static struct physmap_flash_data dk_flash_data = {
+- .width = 2,
++ .width = 2,
+ };
+
+ static struct resource dk_flash_resource = {
+@@ -170,6 +349,13 @@
+ .num_resources = 1,
+ };
+
++static struct at91_gpio_led dk_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB2,
++ .trigger = "timer",
++ }
++};
+
+ static void __init dk_board_init(void)
+ {
+@@ -194,14 +380,16 @@
+ #else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+- at91_add_device_mmc(&dk_mmc_data);
++ at91_add_device_mmc(0, &dk_mmc_data);
+ #endif
+ /* NAND */
+ at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
++ /* LEDs */
++ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
+ /* VGA */
+-// dk_add_device_video();
++ dk_add_device_video();
+ }
+
+ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-eb9200.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-eb9200.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-eb9200.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-eb9200.c 2007-03-24 16:39:15.000000000 +0100
+@@ -109,7 +109,7 @@
+ at91_add_device_spi(NULL, 0);
+ /* MMC */
+ /* only supports 1 or 4 bit interface, not wired through to SPI */
+- at91_add_device_mmc(&eb9200_mmc_data);
++ at91_add_device_mmc(0, &eb9200_mmc_data);
+ }
+
+ MACHINE_START(ATEB9200, "Embest ATEB9200")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-ek.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-ek.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-ek.c 2007-03-24 16:39:15.000000000 +0100
+@@ -73,6 +73,187 @@
+ at91rm9200_init_interrupts(NULL);
+ }
+
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE 0x40000000L
++#define AT91_FB_REG_SIZE 0x200
++#define AT91_FB_VMEM_BASE 0x40200000L
++#define AT91_FB_VMEM_SIZE 0x140000L
++
++static void __init ek_init_video(void)
++{
++ /* NWAIT Signal */
++ at91_set_A_periph(AT91_PIN_PC6, 0);
++
++ /* Initialization of the Static Memory Controller for Chip Select 3 */
++ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
++ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
++ | AT91_SMC_TDF_(1) /* float time */
++ );
++
++ at91_ics1523_init();
++}
++
++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
++ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
++ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
++ {S1DREG_GPIO_CTL0, 0x00},
++ {S1DREG_GPIO_CTL1, 0x00},
++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
++ {S1DREG_LCD_CLK_CNF, 0x00},
++ {S1DREG_CRT_CLK_CNF, 0x00},
++ {S1DREG_MPLUG_CLK_CNF, 0x00},
++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
++ {S1DREG_LCD_DISP_START0, 0x00},
++ {S1DREG_LCD_DISP_START1, 0xC8},
++ {S1DREG_LCD_DISP_START2, 0x00},
++ {S1DREG_LCD_MEM_OFF0, 0x80},
++ {S1DREG_LCD_MEM_OFF1, 0x02},
++ {S1DREG_LCD_PIX_PAN, 0x00},
++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_TV_OUT_CTL, 0x10},
++ {0x005E, 0x9F},
++ {0x005F, 0x00},
++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_CRT_DISP_START0, 0x00},
++ {S1DREG_CRT_DISP_START1, 0x00},
++ {S1DREG_CRT_DISP_START2, 0x00},
++ {S1DREG_CRT_MEM_OFF0, 0x80},
++ {S1DREG_CRT_MEM_OFF1, 0x02},
++ {S1DREG_CRT_PIX_PAN, 0x00},
++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_LCD_CUR_START, 0x01},
++ {S1DREG_LCD_CUR_XPOS0, 0x00},
++ {S1DREG_LCD_CUR_XPOS1, 0x00},
++ {S1DREG_LCD_CUR_YPOS0, 0x00},
++ {S1DREG_LCD_CUR_YPOS1, 0x00},
++ {S1DREG_LCD_CUR_BCTL0, 0x00},
++ {S1DREG_LCD_CUR_GCTL0, 0x00},
++ {S1DREG_LCD_CUR_RCTL0, 0x00},
++ {S1DREG_LCD_CUR_BCTL1, 0x1F},
++ {S1DREG_LCD_CUR_GCTL1, 0x3F},
++ {S1DREG_LCD_CUR_RCTL1, 0x1F},
++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_CRT_CUR_START, 0x01},
++ {S1DREG_CRT_CUR_XPOS0, 0x00},
++ {S1DREG_CRT_CUR_XPOS1, 0x00},
++ {S1DREG_CRT_CUR_YPOS0, 0x00},
++ {S1DREG_CRT_CUR_YPOS1, 0x00},
++ {S1DREG_CRT_CUR_BCTL0, 0x00},
++ {S1DREG_CRT_CUR_GCTL0, 0x00},
++ {S1DREG_CRT_CUR_RCTL0, 0x00},
++ {S1DREG_CRT_CUR_BCTL1, 0x1F},
++ {S1DREG_CRT_CUR_GCTL1, 0x3F},
++ {S1DREG_CRT_CUR_RCTL1, 0x1F},
++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CC_EXP, 0x00},
++ {S1DREG_BBLT_OP, 0x00},
++ {S1DREG_BBLT_SRC_START0, 0x00},
++ {S1DREG_BBLT_SRC_START1, 0x00},
++ {S1DREG_BBLT_SRC_START2, 0x00},
++ {S1DREG_BBLT_DST_START0, 0x00},
++ {S1DREG_BBLT_DST_START1, 0x00},
++ {S1DREG_BBLT_DST_START2, 0x00},
++ {S1DREG_BBLT_MEM_OFF0, 0x00},
++ {S1DREG_BBLT_MEM_OFF1, 0x00},
++ {S1DREG_BBLT_WIDTH0, 0x00},
++ {S1DREG_BBLT_WIDTH1, 0x00},
++ {S1DREG_BBLT_HEIGHT0, 0x00},
++ {S1DREG_BBLT_HEIGHT1, 0x00},
++ {S1DREG_BBLT_BGC0, 0x00},
++ {S1DREG_BBLT_BGC1, 0x00},
++ {S1DREG_BBLT_FGC0, 0x00},
++ {S1DREG_BBLT_FGC1, 0x00},
++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
++ {S1DREG_LKUP_ADDR, 0x00},
++ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
++ {S1DREG_CPU2MEM_WDOGT, 0x00},
++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
++ .initregs = ek_s1dfb_initregs,
++ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
++ .platform_init_video = ek_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource ek_s1dfb_resource[] = {
++ [0] = { /* video mem */
++ .name = "s1d13806 memory",
++ .start = AT91_FB_VMEM_BASE,
++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = { /* video registers */
++ .name = "s1d13806 registers",
++ .start = AT91_FB_REG_BASE,
++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device ek_s1dfb_device = {
++ .name = "s1d13806fb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &s1dfb_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &ek_s1dfb_pdata,
++ },
++ .resource = ek_s1dfb_resource,
++ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
++};
++
++static void __init ek_add_device_video(void)
++{
++ platform_device_register(&ek_s1dfb_device);
++}
++#else
++static void __init ek_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+@@ -113,7 +294,7 @@
+ #define EK_FLASH_SIZE 0x200000
+
+ static struct physmap_flash_data ek_flash_data = {
+- .width = 2,
++ .width = 2,
+ };
+
+ static struct resource ek_flash_resource = {
+@@ -132,6 +313,18 @@
+ .num_resources = 1,
+ };
+
++static struct at91_gpio_led ek_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB1,
++ .trigger = "heartbeat",
++ },
++ {
++ .name = "led1",
++ .gpio = AT91_PIN_PB2,
++ .trigger = "timer",
++ }
++};
+
+ static void __init ek_board_init(void)
+ {
+@@ -154,12 +347,14 @@
+ #else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+- at91_add_device_mmc(&ek_mmc_data);
++ at91_add_device_mmc(0, &ek_mmc_data);
+ #endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
++ /* LEDs */
++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* VGA */
+-// ek_add_device_video();
++ ek_add_device_video();
+ }
+
+ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-kb9202.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-kb9202.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-kb9202.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-kb9202.c 2007-03-24 16:39:15.000000000 +0100
+@@ -122,7 +122,7 @@
+ /* USB Device */
+ at91_add_device_udc(&kb9202_udc_data);
+ /* MMC */
+- at91_add_device_mmc(&kb9202_mmc_data);
++ at91_add_device_mmc(0, &kb9202_mmc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9260ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9260ek.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9260ek.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9260ek.c 2007-03-24 16:39:15.000000000 +0100
+@@ -1,5 +1,5 @@
+ /*
+- * linux/arch/arm/mach-at91rm9200/board-ek.c
++ * linux/arch/arm/mach-at91rm9200/board-sam9260ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+@@ -118,7 +118,7 @@
+ /*
+ * MACB Ethernet device
+ */
+-static struct __initdata eth_platform_data ek_macb_data = {
++static struct __initdata at91_eth_data ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA7,
+ .is_rmii = 1,
+ };
+@@ -187,7 +187,7 @@
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* MMC */
+- at91_add_device_mmc(&ek_mmc_data);
++ at91_add_device_mmc(0, &ek_mmc_data);
+ }
+
+ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9261ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9261ek.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9261ek.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9261ek.c 2007-03-24 16:39:15.000000000 +0100
+@@ -1,5 +1,5 @@
+ /*
+- * linux/arch/arm/mach-at91rm9200/board-ek.c
++ * linux/arch/arm/mach-at91rm9200/board-sam9261ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+@@ -26,6 +26,11 @@
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/dm9000.h>
++#include <linux/spi/ads7846.h>
++#include <linux/fb.h>
++#include <linux/clk.h>
++
++#include <video/atmel_lcdc.h>
+
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+@@ -148,6 +153,42 @@
+
+
+ /*
++ * Touchscreen ads7843
++ */
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++
++int ads7843_pendown_state(void)
++{
++ return !at91_get_gpio_value(AT91_PIN_PC2);
++}
++
++static struct ads7846_platform_data ads_info = {
++ .model = 7843,
++ .x_min = 150, .x_max = 3830,
++ .y_min = 190, .y_max = 3830,
++ .vref_delay_usecs = 100,
++ .x_plate_ohms = 450,
++ .y_plate_ohms = 250,
++ .pressure_max = 15000,
++ .debounce_max = 1,
++ .debounce_rep = 0,
++ .debounce_tol = (~0),
++ .get_pendown_state = ads7843_pendown_state,
++};
++
++void __init at91_add_device_ts(void)
++{
++ /* Configure Interrupt 1 as external IRQ, with pullup */
++ at91_set_B_periph(AT91_PIN_PC2, 1); /* IRQ0 */
++ /* ts busy */
++ at91_set_gpio_input(AT91_PIN_PA11, 1);
++}
++#else
++void __init at91_add_device_ts(void) {}
++#endif
++
++
++/*
+ * MCI (SD/MMC)
+ */
+ static struct at91_mmc_data __initdata ek_mmc_data = {
+@@ -204,6 +245,17 @@
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++ {
++ .modalias = "ads7846",
++ .chip_select = 2,
++ .max_speed_hz = 125000 /* max sample rate at 3V */
++ * 26, /* command + data + overhead */
++ .bus_num = 0,
++ .platform_data = &ads_info,
++ .irq = AT91SAM9261_ID_IRQ0,
++ },
++#endif
+ #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
+ .modalias = "mtd_dataflash",
+@@ -222,6 +274,64 @@
+ };
+
+
++/*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++ {
++ .name = "TX09D50VM1CCA @ 60",
++ .refresh = 60,
++ .xres = 240, .yres = 320,
++ .pixclock = KHZ2PICOS(4965),
++
++ .left_margin = 1, .right_margin = 33,
++ .upper_margin = 1, .lower_margin = 0,
++ .hsync_len = 5, .vsync_len = 1,
++
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++
++static struct fb_monspecs at91fb_default_monspecs = {
++ .manufacturer = "HIT",
++ .monitor = "TX09D50VM1CCA",
++
++ .modedb = at91_tft_vga_modes,
++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
++ .hfmin = 15000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++
++/* Driver defaults */
++#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++ | ATMEL_LCDC_DISTYPE_TFT \
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++#define AT91SAM9261_DEFAULT_FB_FLAGS (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_XPAN \
++ | FBINFO_HWACCEL_YPAN)
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .default_bpp = 16,
++ .default_dmacon = ATMEL_LCDC_DMAEN,
++ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
++ .default_monspecs = &at91fb_default_monspecs,
++ .default_flags = AT91SAM9261_DEFAULT_FB_FLAGS,
++ .power_control_pin = AT91_PIN_PA12,
++ .guard_time = 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata ek_lcdc_data;
++#endif
++
++
+ static void __init ek_board_init(void)
+ {
+ /* Serial */
+@@ -243,8 +353,12 @@
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ #else
+ /* MMC */
+- at91_add_device_mmc(&ek_mmc_data);
++ at91_add_device_mmc(0, &ek_mmc_data);
+ #endif
++ /* LCD Controller */
++ at91_add_device_lcdc(&ek_lcdc_data);
++ /* Touchscreen */
++ at91_add_device_ts();
+ }
+
+ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9263ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9263ek.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9263ek.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9263ek.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,297 @@
++/*
++ * linux/arch/arm/mach-at91rm9200/board-sam9263ek.c
++ *
++ * Copyright (C) 2005 SAN People
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/ads7846.h>
++#include <linux/fb.h>
++#include <linux/clk.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ * 0 .. 2 = USART0 .. USART2
++ * 3 = DBGU
++ */
++static struct at91_uart_config __initdata ek_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 2,
++ .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
++};
++
++static void __init ek_map_io(void)
++{
++ /* Initialize processor: 16.367 MHz crystal */
++ at91sam9263_initialize(16367660);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&ek_uart_config);
++}
++
++static void __init ek_init_irq(void)
++{
++ at91sam9263_init_interrupts(NULL);
++}
++
++
++/*
++ * USB Host port
++ */
++static struct at91_usbh_data __initdata ek_usbh_data = {
++ .ports = 2,
++ .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
++};
++
++/*
++ * USB Device port
++ */
++static struct at91_udc_data __initdata ek_udc_data = {
++ .vbus_pin = AT91_PIN_PA25,
++ .pullup_pin = 0, /* pull-up driven by UDC */
++};
++
++/*
++ * Touchscreen ads7843
++ */
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++
++int ads7843_pendown_state(void)
++{
++ return !at91_get_gpio_value(AT91_PIN_PA15);
++}
++
++static struct ads7846_platform_data ads_info = {
++ .model = 7843,
++ .x_min = 150, .x_max = 3830,
++ .y_min = 190, .y_max = 3830,
++ .vref_delay_usecs = 100,
++ .x_plate_ohms = 450,
++ .y_plate_ohms = 250,
++ .pressure_max = 15000,
++ .debounce_max = 1,
++ .debounce_rep = 0,
++ .debounce_tol = (~0),
++ .get_pendown_state = ads7843_pendown_state,
++};
++
++void __init at91_add_device_ts(void)
++{
++ /* Configure Interrupt 1 as external IRQ, with pullup */
++ at91_set_B_periph(AT91_PIN_PA15, 1); /* IRQ1 */
++ /* ts busy */
++ at91_set_gpio_input(AT91_PIN_PA31, 1);
++}
++#else
++void __init at91_add_device_ts(void) {}
++#endif
++
++/*
++ * SPI devices.
++ */
++static struct spi_board_info ek_spi_devices[] = {
++#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
++ { /* DataFlash card */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ .bus_num = 0,
++ },
++#endif
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++ {
++ .modalias = "ads7846",
++ .chip_select = 3,
++ .max_speed_hz = 125000 /* max sample rate at 3V */
++ * 26, /* command + data + overhead */
++ .bus_num = 0,
++ .platform_data = &ads_info,
++ .irq = AT91SAM9263_ID_IRQ1,
++ },
++#endif
++};
++
++/*
++ * MACB device
++ */
++static struct __initdata at91_eth_data ek_macb_data = {
++ .is_rmii = 1,
++};
++
++/*
++ * MCI (SD/MMC)
++ */
++static struct at91_mmc_data __initdata ek_mmc_data = {
++ .wire4 = 1,
++ .det_pin = AT91_PIN_PE18,
++ .wp_pin = AT91_PIN_PE19,
++// .vcc_pin = ... not connected
++};
++
++
++/*
++ * NAND flash
++ */
++static struct mtd_partition __initdata ek_nand_partition[] = {
++ {
++ .name = "Partition 1",
++ .offset = 0,
++ .size = 64 * 1024 * 1024,
++ },
++ {
++ .name = "Partition 2",
++ .offset = 64 * 1024 * 1024,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition *nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(ek_nand_partition);
++ return ek_nand_partition;
++}
++
++static struct at91_nand_data __initdata ek_nand_data = {
++ .ale = 21,
++ .cle = 22,
++// .det_pin = ... not connected
++ .rdy_pin = AT91_PIN_PA22,
++ .enable_pin = AT91_PIN_PD15,
++ .partition_info = nand_partitions,
++#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
++ .bus_width_16 = 1,
++#else
++ .bus_width_16 = 0,
++#endif
++};
++
++/*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++ {
++ .name = "TX09D50VM1CCA @ 60",
++ .refresh = 60,
++ .xres = 240, .yres = 320,
++ .pixclock = KHZ2PICOS(4965),
++
++ .left_margin = 1, .right_margin = 33,
++ .upper_margin = 1, .lower_margin = 0,
++ .hsync_len = 5, .vsync_len = 1,
++
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++
++static struct fb_monspecs at91fb_default_monspecs = {
++ .manufacturer = "HIT",
++ .monitor = "TX09D70VM1CCA",
++
++ .modedb = at91_tft_vga_modes,
++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
++ .hfmin = 15000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++
++/* Driver defaults */
++#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++ | ATMEL_LCDC_DISTYPE_TFT \
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++#define AT91SAM9261_DEFAULT_FB_FLAGS (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_XPAN \
++ | FBINFO_HWACCEL_YPAN)
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .default_bpp = 16,
++ .default_dmacon = ATMEL_LCDC_DMAEN,
++ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
++ .default_monspecs = &at91fb_default_monspecs,
++ .default_flags = AT91SAM9261_DEFAULT_FB_FLAGS,
++ .power_control_pin = AT91_PIN_PD12,
++ .guard_time = 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata ek_lcdc_data;
++#endif
++
++
++static void __init ek_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* USB Host */
++ at91_add_device_usbh(&ek_usbh_data);
++ /* USB Device */
++ at91_add_device_udc(&ek_udc_data);
++ /* select SPI clk for Dataflash card slot */
++ at91_set_gpio_output(AT91_PIN_PE20, 1);
++ /* SPI */
++ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
++ /* MMC */
++ at91_add_device_mmc(1, &ek_mmc_data);
++ /* MACB */
++ at91_add_device_eth(&ek_macb_data);
++ /* NAND */
++ at91_add_device_nand(&ek_nand_data);
++ /* LCD Controller */
++ at91_add_device_lcdc(&ek_lcdc_data);
++ /* Touchscreen */
++ at91_add_device_ts();
++}
++
++MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
++ /* Maintainer: Atmel */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91sam926x_timer,
++ .map_io = ek_map_io,
++ .init_irq = ek_init_irq,
++ .init_machine = ek_board_init,
++MACHINE_END
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/clock.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/clock.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/clock.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/clock.c 2007-03-24 16:39:15.000000000 +0100
+@@ -375,6 +375,7 @@
+ seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+
+ seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
++#warning "Hard-coded PCK"
+ for (i = 0; i < 4; i++)
+ seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
+ seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+@@ -525,27 +526,6 @@
+ return 0;
+ }
+
+-/*
+- * Several unused clocks may be active. Turn them off.
+- */
+-static void __init at91_periphclk_reset(void)
+-{
+- unsigned long reg;
+- struct clk *clk;
+-
+- reg = at91_sys_read(AT91_PMC_PCSR);
+-
+- list_for_each_entry(clk, &clocks, node) {
+- if (clk->mode != pmc_periph_mode)
+- continue;
+-
+- if (clk->users > 0)
+- reg &= ~clk->pmc_mask;
+- }
+-
+- at91_sys_write(AT91_PMC_PCDR, reg);
+-}
+-
+ static struct clk *const standard_pmc_clocks[] __initdata = {
+ /* four primary clocks */
+ &clk32k,
+@@ -586,7 +566,7 @@
+ pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
+
+ /*
+- * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
++ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+@@ -596,16 +576,10 @@
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+- at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+- } else if (cpu_is_at91sam9260()) {
++ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
+- } else if (cpu_is_at91sam9261()) {
+- uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
+- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+@@ -634,11 +608,34 @@
+ (unsigned) main_clock / 1000000,
+ ((unsigned) main_clock % 1000000) / 1000);
+
+- /* disable all programmable clocks */
+- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
++ return 0;
++}
++
++/*
++ * Several unused clocks may be active. Turn them off.
++ */
++static int __init at91_clock_reset(void)
++{
++ unsigned long pcdr = 0;
++ unsigned long scdr = 0;
++ struct clk *clk;
++
++ list_for_each_entry(clk, &clocks, node) {
++ if (clk->users > 0)
++ continue;
++
++ if (clk->mode == pmc_periph_mode)
++ pcdr |= clk->pmc_mask;
++
++ if (clk->mode == pmc_sys_mode)
++ scdr |= clk->pmc_mask;
++
++ pr_debug("Clocks: disable unused %s\n", clk->name);
++ }
+
+- /* disable all other unused peripheral clocks */
+- at91_periphclk_reset();
++ at91_sys_write(AT91_PMC_PCDR, pcdr);
++ at91_sys_write(AT91_PMC_SCDR, scdr);
+
+ return 0;
+ }
++late_initcall(at91_clock_reset);
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/generic.h linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/generic.h
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/generic.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/generic.h 2007-03-24 16:39:15.000000000 +0100
+@@ -12,11 +12,13 @@
+ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+ extern void __init at91sam9260_initialize(unsigned long main_clock);
+ extern void __init at91sam9261_initialize(unsigned long main_clock);
++extern void __init at91sam9263_initialize(unsigned long main_clock);
+
+ /* Interrupts */
+ extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
+ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
+ extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
++extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
+ extern void __init at91_aic_init(unsigned int priority[]);
+
+ /* Timer */
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/ics1523.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/ics1523.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/ics1523.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/ics1523.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,207 @@
++/*
++ * arch/arm/mach-at91rm9200/ics1523.c
++ *
++ * Copyright (C) 2003 ATMEL Rousset
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/init.h>
++
++#include <asm/arch/ics1523.h>
++#include <asm/arch/at91_twi.h>
++#include <asm/arch/gpio.h>
++
++/* TWI Errors */
++#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
++
++
++static void __iomem *twi_base;
++
++#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
++#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
++
++
++/* -----------------------------------------------------------------------------
++ * Initialization of TWI CLOCK
++ * ----------------------------------------------------------------------------- */
++
++static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
++{
++ int sclock;
++
++ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
++ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
++ if (sclock % 10 >= 5)
++ sclock = (sclock /10) - 5;
++ else
++ sclock = (sclock /10)- 6;
++ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
++
++ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
++}
++
++/* -----------------------------------------------------------------------------
++ * Read a byte with TWI Interface from the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
++{
++ int Status, nb_trial;
++
++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++ at91_twi_write(AT91_TWI_IADR, reg_address);
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++
++ /* Wait TXcomplete ... */
++ nb_trial = 0;
++ Status = at91_twi_read(AT91_TWI_SR);
++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++ nb_trial++;
++ Status = at91_twi_read(AT91_TWI_SR);
++ }
++
++ if (Status & AT91_TWI_TXCOMP) {
++ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
++ return ICS1523_ACCESS_OK;
++ }
++ else
++ return ICS1523_ACCESS_ERROR;
++}
++
++/* -----------------------------------------------------------------------------
++ * Write a byte with TWI Interface to the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
++{
++ int Status, nb_trial;
++
++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++ at91_twi_write(AT91_TWI_IADR, reg_address);
++ at91_twi_write(AT91_TWI_THR, data_out);
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++
++ nb_trial = 0;
++ Status = at91_twi_read(AT91_TWI_SR);
++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++ nb_trial++;
++ if (Status & AT91_TWI_ERROR) {
++ /* If Underrun OR NACK - Start again */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++ }
++ Status = at91_twi_read(AT91_TWI_SR);
++ };
++
++ if (Status & AT91_TWI_TXCOMP)
++ return ICS1523_ACCESS_OK;
++ else
++ return ICS1523_ACCESS_ERROR;
++}
++
++/* -----------------------------------------------------------------------------
++ * Initialization of the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++int at91_ics1523_init(void)
++{
++ int nb_trial;
++ int ack = ICS1523_ACCESS_OK;
++ unsigned int status = 0xffffffff;
++ struct clk *twi_clk;
++
++ /* Map in TWI peripheral */
++ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
++ if (!twi_base)
++ return -ENOMEM;
++
++ /* pins used for TWI interface */
++ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
++ at91_set_multi_drive(AT91_PIN_PA25, 1);
++ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
++ at91_set_multi_drive(AT91_PIN_PA26, 1);
++
++ /* Enable the TWI clock */
++ twi_clk = clk_get(NULL, "twi_clk");
++ if (IS_ERR(twi_clk))
++ return ICS1523_ACCESS_ERROR;
++ clk_enable(twi_clk);
++
++ /* Disable interrupts */
++ at91_twi_write(AT91_TWI_IDR, -1);
++
++ /* Reset peripheral */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
++
++ /* Set Master mode */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
++
++ /* Set TWI Clock Waveform Generator Register */
++ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
++
++ /* ICS1523 Initialisation */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
++
++ nb_trial = 0;
++ do {
++ nb_trial++;
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
++ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
++
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ /* All done - cleanup */
++ iounmap(twi_base);
++ clk_disable(twi_clk);
++ clk_put(twi_clk);
++
++ return ack;
++}
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Kconfig linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Kconfig
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Kconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -9,11 +9,14 @@
+ bool "AT91RM9200"
+
+ config ARCH_AT91SAM9260
+- bool "AT91SAM9260"
++ bool "AT91SAM9260 or AT91SAM9XE"
+
+ config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
++config ARCH_AT91SAM9263
++ bool "AT91SAM9263"
++
+ endchoice
+
+ # ----------------------------------------------------------
+@@ -90,13 +93,22 @@
+
+ if ARCH_AT91SAM9260
+
+-comment "AT91SAM9260 Board Type"
++comment "AT91SAM9260 Variants"
++
++config ARCH_AT91SAM9260_SAM9XE
++ bool "AT91SAM9XE"
++ depends on ARCH_AT91SAM9260
++ help
++ Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
++ They are basicaly AT91SAM9260s with various sizes of embedded Flash.
++
++comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+ config MACH_AT91SAM9260EK
+- bool "Atmel AT91SAM9260-EK Evaluation Kit"
++ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ depends on ARCH_AT91SAM9260
+ help
+- Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
++ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+ endif
+@@ -118,21 +130,50 @@
+
+ # ----------------------------------------------------------
+
++if ARCH_AT91SAM9263
++
++comment "AT91SAM9263 Board Type"
++
++config MACH_AT91SAM9263EK
++ bool "Atmel AT91SAM9263-EK Evaluation Kit"
++ depends on ARCH_AT91SAM9263
++ help
++ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
++ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
++
++endif
++
++# ----------------------------------------------------------
++
+ comment "AT91 Board Options"
+
+ config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
++ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ help
+ Enable support for the DataFlash card.
+
+ config MTD_NAND_AT91_BUSWIDTH_16
+ bool "Enable 16-bit data bus interface to NAND flash"
+- depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
++ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK || MACH_AT91SAM9263EK)
+ help
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+
++config CSB300_WAKE_SW0
++ bool "CSB300 SW0 irq0 wakeup"
++ depends on MACH_CSB337 && PM
++ help
++ If you have a CSB300 connected to your CSB337, this lets
++ SW0 serve as a wakeup button. It uses IRQ0.
++
++config CSB300_WAKE_SW1
++ bool "CSB300 SW1 gpio wakeup"
++ depends on MACH_CSB337 && PM
++ help
++ If you have a CSB300 connected to your CSB337, this lets
++ SW1 serve as a wakeup button. It uses GPIO.
++
+ # ----------------------------------------------------------
+
+ comment "AT91 Feature Selections"
+@@ -143,6 +184,13 @@
+ Select this if you need to program one or more of the PCK0..PCK3
+ programmable clock outputs.
+
++config AT91_SLOW_CLOCK
++ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
++ depends on PM && EXPERIMENTAL
++ help
++ Select this if you wish to put the CPU into slow clock mode
++ while in the "Suspend to RAM" state, to save more power.
++
+ endmenu
+
+ endif
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/leds.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/leds.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/leds.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/leds.c 2007-03-24 16:39:15.000000000 +0100
+@@ -86,10 +86,6 @@
+ if (!at91_leds_timer || !at91_leds_cpu)
+ return -ENODEV;
+
+- /* Enable PIO to access the LEDs */
+- at91_set_gpio_output(at91_leds_timer, 1);
+- at91_set_gpio_output(at91_leds_cpu, 1);
+-
+ leds_event = at91_leds_event;
+
+ leds_event(led_start);
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Makefile linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Makefile
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Makefile 2007-03-24 16:39:15.000000000 +0100
+@@ -8,11 +8,13 @@
+ obj- :=
+
+ obj-$(CONFIG_PM) += pm.o
++obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
+
+ # CPU-specific support
+ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
+ obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
++obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
+
+ # AT91RM9200 board-specific support
+ obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
+@@ -31,6 +33,9 @@
+ # AT91SAM9261 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+
++# AT91SAM9263 board-specific support
++obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
++
+ # LEDs support
+ led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
+ led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
+@@ -41,7 +46,7 @@
+ obj-$(CONFIG_LEDS) += $(led-y)
+
+ # VGA support
+-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
++obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
+
+
+ ifeq ($(CONFIG_PM_DEBUG),y)
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm.c
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm.c 2007-03-24 16:39:15.000000000 +0100
+@@ -63,6 +63,7 @@
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
++#warning "SAM9260 only has 3 programmable clocks."
+ static int at91_pm_verify_clocks(void)
+ {
+ unsigned long scsr;
+@@ -80,6 +81,8 @@
+ #warning "Check SAM9260 USB clocks"
+ } else if (cpu_is_at91sam9261()) {
+ #warning "Check SAM9261 USB clocks"
++ } else if (cpu_is_at91sam9263()) {
++#warning "Check SAM9263 USB clocks"
+ }
+
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+@@ -205,16 +208,23 @@
+ .enter = at91_pm_enter,
+ };
+
++#ifdef CONFIG_AT91_SLOW_CLOCK
++extern void at91rm9200_slow_clock(void);
++extern u32 at91rm9200_slow_clock_sz;
++#endif
++
+ static int __init at91_pm_init(void)
+ {
+- printk("AT91: Power Management\n");
+-
+-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+- /* REVISIT allocations of SRAM should be dynamically managed.
++#ifdef CONFIG_AT91_SLOW_CLOCK
++ /*
++ * REVISIT allocations of SRAM should be dynamically managed.
+ * FIQ handlers and other components will want SRAM/TCM too...
+ */
+- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
++ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
+ memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
++ printk("AT91: Power Management (with slow clock mode)\n");
++#else
++ printk("AT91: Power Management\n");
+ #endif
+
+ /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
+diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm_slowclock.S linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm_slowclock.S
+--- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm_slowclock.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm_slowclock.S 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,172 @@
++/*
++ * arch/arm/mach-at91rm9200/pm_slow_clock.S
++ *
++ * Copyright (C) 2006 Savin Zlobec
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/linkage.h>
++#include <asm/hardware.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91rm9200_mc.h>
++
++#define MCKRDY_TIMEOUT 1000
++#define MOSCRDY_TIMEOUT 1000
++#define PLLALOCK_TIMEOUT 1000
++
++ .macro wait_mckrdy
++ mov r2, #MCKRDY_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_MCKRDY
++ beq 1b
++2:
++ .endm
++
++ .macro wait_moscrdy
++ mov r2, #MOSCRDY_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_MOSCS
++ beq 1b
++2:
++ .endm
++
++ .macro wait_pllalock
++ mov r2, #PLLALOCK_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_LOCKA
++ beq 1b
++2:
++ .endm
++
++ .macro wait_plladis
++ mov r2, #PLLALOCK_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_LOCKA
++ bne 1b
++2:
++ .endm
++
++ .text
++
++ENTRY(at91rm9200_slow_clock)
++
++ ldr r1, .at91_va_base_sys
++
++ /* Put SDRAM in self refresh mode */
++
++ b 1f
++ .align 5
++1: mcr p15, 0, r0, c7, c10, 4
++ mov r2, #1
++ str r2, [r1, #AT91_SDRAMC_SRR]
++
++ /* Save Master clock setting */
++
++ ldr r2, [r1, #AT91_PMC_MCKR]
++ str r2, .saved_mckr
++
++ /*
++ * Set the Master clock source to slow clock
++ *
++ * First set the CSS field, wait for MCKRDY
++ * and than set the PRES and MDIV fields.
++ *
++ * See eratta #2[78] for details.
++ */
++
++ bic r2, r2, #3
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ wait_mckrdy
++
++ mov r2, #0
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ /* Save PLLA setting and disable it */
++
++ ldr r2, [r1, #AT91_CKGR_PLLAR]
++ str r2, .saved_pllar
++
++ mov r2, #0
++ str r2, [r1, #AT91_CKGR_PLLAR]
++
++ wait_plladis
++
++ /* Turn off the main oscillator */
++
++ ldr r2, [r1, #AT91_CKGR_MOR]
++ bic r2, r2, #AT91_PMC_MOSCEN
++ str r2, [r1, #AT91_CKGR_MOR]
++
++ /* Wait for interrupt */
++
++ mcr p15, 0, r0, c7, c0, 4
++
++ /* Turn on the main oscillator */
++
++ ldr r2, [r1, #AT91_CKGR_MOR]
++ orr r2, r2, #AT91_PMC_MOSCEN
++ str r2, [r1, #AT91_CKGR_MOR]
++
++ wait_moscrdy
++
++ /* Restore PLLA setting */
++
++ ldr r2, .saved_pllar
++ str r2, [r1, #AT91_CKGR_PLLAR]
++
++ wait_pllalock
++
++ /*
++ * Restore master clock setting
++ *
++ * First set PRES if it was not 0,
++ * than set CSS and MDIV fields.
++ * After every change wait for
++ * MCKRDY.
++ *
++ * See eratta #2[78] for details.
++ */
++
++ ldr r2, .saved_mckr
++ tst r2, #0x1C
++ beq 2f
++ and r2, r2, #0x1C
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ wait_mckrdy
++
++2: ldr r2, .saved_mckr
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ wait_mckrdy
++
++ mov pc, lr
++
++.saved_mckr:
++ .word 0
++
++.saved_pllar:
++ .word 0
++
++.at91_va_base_sys:
++ .word AT91_VA_BASE_SYS
++
++ENTRY(at91rm9200_slow_clock_sz)
++ .word .-at91rm9200_slow_clock
+diff -urN linux-2.6.20.4-0rig/arch/arm/mm/Kconfig linux-2.6.20.4-atmel/arch/arm/mm/Kconfig
+--- linux-2.6.20.4-0rig/arch/arm/mm/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/arm/mm/Kconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -171,8 +171,8 @@
+ # ARM926T
+ config CPU_ARM926T
+ bool "Support ARM926T processor"
+- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
++ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
++ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
+ select CPU_32v5
+ select CPU_ABRT_EV5TJ
+ select CPU_CACHE_VIVT
+diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/atstk1002.c linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/atstk1002.c
+--- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/atstk1002.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/atstk1002.c 2007-03-24 16:42:29.000000000 +0100
+@@ -14,11 +14,17 @@
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
++#include <linux/spi/spi.h>
+
+ #include <asm/io.h>
+ #include <asm/setup.h>
++#include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++
++#define SW2_DEFAULT /* MMCI and UART_A available */
+
+ struct eth_addr {
+ u8 addr[6];
+@@ -29,6 +35,20 @@
+ static struct eth_platform_data __initdata eth_data[2];
+ extern struct lcdc_platform_data atstk1000_fb0_data;
+
++static struct spi_board_info spi0_board_info[] __initdata = {
++ {
++ /* QVGA display */
++ .modalias = "ltv350qv",
++ .max_speed_hz = 16000000,
++ .chip_select = 1,
++ },
++};
++
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -86,25 +106,58 @@
+
+ void __init setup_board(void)
+ {
+- at32_map_usart(1, 0); /* /dev/ttyS0 */
+- at32_map_usart(2, 1); /* /dev/ttyS1 */
+- at32_map_usart(3, 2); /* /dev/ttyS2 */
++#ifdef SW2_DEFAULT
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#else
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+
+ at32_setup_serial_console(0);
+ }
+
+ static int __init atstk1002_init(void)
+ {
++ /*
++ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++ * SDRAM-specific pins so that nobody messes with them.
++ */
++ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
++ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
++ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
++ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
++ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
++ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
++ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
++ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
++ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
++ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
++ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
++ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
++ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
++ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
++ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
++ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
++ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
++
+ at32_add_system_devices();
+
++#ifdef SW2_DEFAULT
+ at32_add_device_usart(0);
++#else
+ at32_add_device_usart(1);
++#endif
+ at32_add_device_usart(2);
+
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
+- at32_add_device_spi(0);
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++ at32_add_device_twi(0);
++ at32_add_device_mci(0, &mci0_data);
+ at32_add_device_lcdc(0, &atstk1000_fb0_data);
++ at32_add_device_usba(0);
++ at32_add_device_abdac(0);
+
+ return 0;
+ }
+diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/Makefile linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/Makefile
+--- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/Makefile 2007-03-24 16:42:28.000000000 +0100
+@@ -1,2 +1,2 @@
+-obj-y += setup.o spi.o flash.o
++obj-y += setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
+diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/spi.c linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/spi.c
+--- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/spi.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/spi.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,27 +0,0 @@
+-/*
+- * ATSTK1000 SPI devices
+- *
+- * Copyright (C) 2005 Atmel Norway
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/device.h>
+-#include <linux/spi/spi.h>
+-
+-static struct spi_board_info spi_board_info[] __initdata = {
+- {
+- .modalias = "ltv350qv",
+- .max_speed_hz = 16000000,
+- .bus_num = 0,
+- .chip_select = 1,
+- },
+-};
+-
+-static int board_init_spi(void)
+-{
+- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+- return 0;
+-}
+-arch_initcall(board_init_spi);
+diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.c linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.c
+--- linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
++
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
++
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
++
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++ dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
++{
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
++
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
++
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
++
++ return block;
++
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
++ }
++ kfree(block);
++ return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
++{
++ unsigned int i;
++
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
++ }
++
++ chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
++
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
++
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
++
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ block_size = (req->buffer_size/req->periods) >> req->width;
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++ chan->nr_blocks = req->periods;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
++
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ set_channel_bit(dmac, CH_EN, channel);
++
++ return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
++ }
++
++
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
++
++ return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
++ }
++
++ return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++ }
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++ while (status) {
++ struct dma_request *req;
++
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
++
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
++ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
++
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
++
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ SA_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++ return 0;
++
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
++}
++
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
++ .driver = {
++ .name = "dmaca",
++ },
++};
++
++static int __init dmac_init(void)
++{
++ return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++ platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.h linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.h
+--- linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
++
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
++
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
++
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
++
++#define DW_DMAC_STATUS_INT 0x360
++
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/Makefile linux-2.6.20.4-atmel/arch/avr32/drivers/Makefile
+--- linux-2.6.20.4-0rig/arch/avr32/drivers/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/drivers/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+diff -urN linux-2.6.20.4-0rig/arch/avr32/Kconfig linux-2.6.20.4-atmel/arch/avr32/Kconfig
+--- linux-2.6.20.4-0rig/arch/avr32/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -112,6 +112,8 @@
+ bool "U-Boot (or similar) bootloader"
+ endchoice
+
++source "arch/avr32/mach-at32ap/Kconfig"
++
+ config LOAD_ADDRESS
+ hex
+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+@@ -160,6 +162,10 @@
+ enabling Nexus-compliant debuggers to keep track of the PID of the
+ currently executing task.
+
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+@@ -195,6 +201,8 @@
+
+ source "fs/Kconfig"
+
++source "arch/avr32/oprofile/Kconfig"
++
+ source "arch/avr32/Kconfig.debug"
+
+ source "security/Kconfig"
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/cpu.c linux-2.6.20.4-atmel/arch/avr32/kernel/cpu.c
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/cpu.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/cpu.c 2007-03-24 16:42:28.000000000 +0100
+@@ -9,6 +9,7 @@
+ #include <linux/sysdev.h>
+ #include <linux/seq_file.h>
+ #include <linux/cpu.h>
++#include <linux/module.h>
+ #include <linux/percpu.h>
+ #include <linux/param.h>
+ #include <linux/errno.h>
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/dma-controller.c linux-2.6.20.4-atmel/arch/avr32/kernel/dma-controller.c
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/dma-controller.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/dma-controller.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++ static int next_id;
++
++ dmac->id = next_id++;
++ list_add_tail(&dmac->list, &controllers);
++
++ return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++ struct dma_controller *dmac;
++
++ list_for_each_entry(dmac, &controllers, list)
++ if (dmac->id == id)
++ return dmac;
++ return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/irq.c linux-2.6.20.4-atmel/arch/avr32/kernel/irq.c
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/irq.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/irq.c 2007-03-24 16:42:28.000000000 +0100
+@@ -57,6 +57,7 @@
+ seq_printf(p, "%3d: ", i);
+ for_each_online_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
++ seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-");
+ seq_printf(p, " %s", action->name);
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/Makefile linux-2.6.20.4-atmel/arch/avr32/kernel/Makefile
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -9,6 +9,7 @@
+ obj-y += setup.o traps.o semaphore.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/setup.c linux-2.6.20.4-atmel/arch/avr32/kernel/setup.c
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/setup.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/setup.c 2007-03-24 16:42:28.000000000 +0100
+@@ -16,6 +16,7 @@
+ #include <linux/module.h>
+ #include <linux/root_dev.h>
+ #include <linux/cpu.h>
++#include <linux/kernel.h>
+
+ #include <asm/sections.h>
+ #include <asm/processor.h>
+@@ -174,8 +175,7 @@
+ * Copy the data so the bootmem init code doesn't need to care
+ * about it.
+ */
+- if (mem_range_next_free >=
+- (sizeof(mem_range_cache) / sizeof(mem_range_cache[0])))
++ if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
+ panic("Physical memory map too complex!\n");
+
+ new = &mem_range_cache[mem_range_next_free++];
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/syscall_table.S linux-2.6.20.4-atmel/arch/avr32/kernel/syscall_table.S
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/syscall_table.S 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/syscall_table.S 2007-03-24 16:42:28.000000000 +0100
+@@ -8,14 +8,6 @@
+ * published by the Free Software Foundation.
+ */
+
+-#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
+-#define sys_nfsservctl sys_ni_syscall
+-#endif
+-
+-#if !defined(CONFIG_SYSV_IPC)
+-# define sys_ipc sys_ni_syscall
+-#endif
+-
+ .section .rodata,"a",@progbits
+ .type sys_call_table,@object
+ .global sys_call_table
+@@ -129,7 +121,7 @@
+ .long sys_getitimer /* 105 */
+ .long sys_swapoff
+ .long sys_sysinfo
+- .long sys_ipc
++ .long sys_ni_syscall /* was sys_ipc briefly */
+ .long sys_sendfile
+ .long sys_setdomainname /* 110 */
+ .long sys_newuname
+@@ -287,4 +279,16 @@
+ .long sys_tee
+ .long sys_vmsplice
+ .long __sys_epoll_pwait /* 265 */
++ .long sys_msgget
++ .long sys_msgsnd
++ .long sys_msgrcv
++ .long sys_msgctl
++ .long sys_semget /* 270 */
++ .long sys_semop
++ .long sys_semctl
++ .long sys_semtimedop
++ .long sys_shmat
++ .long sys_shmget /* 275 */
++ .long sys_shmdt
++ .long sys_shmctl
+ .long sys_ni_syscall /* r8 is saturated at nr_syscalls */
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/time.c linux-2.6.20.4-atmel/arch/avr32/kernel/time.c
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/time.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/time.c 2007-03-24 16:42:29.000000000 +0100
+@@ -21,6 +21,7 @@
+ #include <linux/profile.h>
+ #include <linux/sysdev.h>
+
++#include <asm/intc.h>
+ #include <asm/div64.h>
+ #include <asm/sysreg.h>
+ #include <asm/io.h>
+@@ -136,6 +137,10 @@
+ {
+ unsigned int count;
+
++ /* Check if interrupt is timer or performance counters */
++ if (!(intc_get_pending(irq) & 1))
++ return IRQ_NONE;
++
+ /* ack timer interrupt and try to set next interrupt */
+ count = avr32_hpt_read();
+ avr32_timer_ack();
+@@ -164,7 +169,7 @@
+
+ static struct irqaction timer_irqaction = {
+ .handler = timer_interrupt,
+- .flags = IRQF_DISABLED,
++ .flags = IRQF_DISABLED|IRQF_SHARED,
+ .name = "timer",
+ };
+
+diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/traps.c linux-2.6.20.4-atmel/arch/avr32/kernel/traps.c
+--- linux-2.6.20.4-0rig/arch/avr32/kernel/traps.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/kernel/traps.c 2007-03-24 16:42:28.000000000 +0100
+@@ -49,39 +49,45 @@
+ return;
+ }
+
++static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
++{
++ return (p > (unsigned long)tinfo)
++ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
++}
++
+ #ifdef CONFIG_FRAME_POINTER
+ static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
+ struct pt_regs *regs)
+ {
+- unsigned long __user *fp;
+- unsigned long __user *last_fp = NULL;
++ unsigned long lr, fp;
++ struct thread_info *tinfo;
+
+- if (regs) {
+- fp = (unsigned long __user *)regs->r7;
+- } else if (tsk == current) {
+- register unsigned long __user *real_fp __asm__("r7");
+- fp = real_fp;
+- } else {
+- fp = (unsigned long __user *)tsk->thread.cpu_context.r7;
+- }
++ tinfo = (struct thread_info *)
++ ((unsigned long)sp & ~(THREAD_SIZE - 1));
++
++ if (regs)
++ fp = regs->r7;
++ else if (tsk == current)
++ asm("mov %0, r7" : "=r"(fp));
++ else
++ fp = tsk->thread.cpu_context.r7;
+
+ /*
+- * Walk the stack until (a) we get an exception, (b) the frame
+- * pointer becomes zero, or (c) the frame pointer gets stuck
+- * at the same value.
++ * Walk the stack as long as the frame pointer (a) is within
++ * the kernel stack of the task, and (b) it doesn't move
++ * downwards.
+ */
+- while (fp && fp != last_fp) {
+- unsigned long lr, new_fp = 0;
+-
+- last_fp = fp;
+- if (__get_user(lr, fp))
+- break;
+- if (fp && __get_user(new_fp, fp + 1))
+- break;
+- fp = (unsigned long __user *)new_fp;
++ while (valid_stack_ptr(tinfo, fp)) {
++ unsigned long new_fp;
+
++ lr = *(unsigned long *)fp;
+ printk(" [<%08lx>] ", lr);
+ print_symbol("%s\n", lr);
++
++ new_fp = *(unsigned long *)(fp + 4);
++ if (new_fp <= fp)
++ break;
++ fp = new_fp;
+ }
+ printk("\n");
+ }
+diff -urN linux-2.6.20.4-0rig/arch/avr32/lib/libgcc.h linux-2.6.20.4-atmel/arch/avr32/lib/libgcc.h
+--- linux-2.6.20.4-0rig/arch/avr32/lib/libgcc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/lib/libgcc.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,33 +0,0 @@
+-/* Definitions for various functions 'borrowed' from gcc-3.4.3 */
+-
+-#define BITS_PER_UNIT 8
+-
+-typedef int QItype __attribute__ ((mode (QI)));
+-typedef unsigned int UQItype __attribute__ ((mode (QI)));
+-typedef int HItype __attribute__ ((mode (HI)));
+-typedef unsigned int UHItype __attribute__ ((mode (HI)));
+-typedef int SItype __attribute__ ((mode (SI)));
+-typedef unsigned int USItype __attribute__ ((mode (SI)));
+-typedef int DItype __attribute__ ((mode (DI)));
+-typedef unsigned int UDItype __attribute__ ((mode (DI)));
+-typedef float SFtype __attribute__ ((mode (SF)));
+-typedef float DFtype __attribute__ ((mode (DF)));
+-typedef int word_type __attribute__ ((mode (__word__)));
+-
+-#define W_TYPE_SIZE (4 * BITS_PER_UNIT)
+-#define Wtype SItype
+-#define UWtype USItype
+-#define HWtype SItype
+-#define UHWtype USItype
+-#define DWtype DItype
+-#define UDWtype UDItype
+-#define __NW(a,b) __ ## a ## si ## b
+-#define __NDW(a,b) __ ## a ## di ## b
+-
+-struct DWstruct {Wtype high, low;};
+-
+-typedef union
+-{
+- struct DWstruct s;
+- DWtype ll;
+-} DWunion;
+diff -urN linux-2.6.20.4-0rig/arch/avr32/lib/longlong.h linux-2.6.20.4-atmel/arch/avr32/lib/longlong.h
+--- linux-2.6.20.4-0rig/arch/avr32/lib/longlong.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/lib/longlong.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,98 +0,0 @@
+-/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
+- Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+- Free Software Foundation, Inc.
+-
+- This definition file is free software; you can redistribute it
+- and/or modify it under the terms of the GNU General Public
+- License as published by the Free Software Foundation; either
+- version 2, or (at your option) any later version.
+-
+- This definition file is distributed in the hope that it will be
+- useful, but WITHOUT ANY WARRANTY; without even the implied
+- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+- See the GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software
+- Foundation, Inc., 59 Temple Place - Suite 330,
+- Boston, MA 02111-1307, USA. */
+-
+-/* Borrowed from gcc-3.4.3 */
+-
+-#define __BITS4 (W_TYPE_SIZE / 4)
+-#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+-#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+-#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+-
+-#define count_leading_zeros(count, x) ((count) = __builtin_clz(x))
+-
+-#define __udiv_qrnnd_c(q, r, n1, n0, d) \
+- do { \
+- UWtype __d1, __d0, __q1, __q0; \
+- UWtype __r1, __r0, __m; \
+- __d1 = __ll_highpart (d); \
+- __d0 = __ll_lowpart (d); \
+- \
+- __r1 = (n1) % __d1; \
+- __q1 = (n1) / __d1; \
+- __m = (UWtype) __q1 * __d0; \
+- __r1 = __r1 * __ll_B | __ll_highpart (n0); \
+- if (__r1 < __m) \
+- { \
+- __q1--, __r1 += (d); \
+- if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
+- if (__r1 < __m) \
+- __q1--, __r1 += (d); \
+- } \
+- __r1 -= __m; \
+- \
+- __r0 = __r1 % __d1; \
+- __q0 = __r1 / __d1; \
+- __m = (UWtype) __q0 * __d0; \
+- __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
+- if (__r0 < __m) \
+- { \
+- __q0--, __r0 += (d); \
+- if (__r0 >= (d)) \
+- if (__r0 < __m) \
+- __q0--, __r0 += (d); \
+- } \
+- __r0 -= __m; \
+- \
+- (q) = (UWtype) __q1 * __ll_B | __q0; \
+- (r) = __r0; \
+- } while (0)
+-
+-#define udiv_qrnnd __udiv_qrnnd_c
+-
+-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+- do { \
+- UWtype __x; \
+- __x = (al) - (bl); \
+- (sh) = (ah) - (bh) - (__x > (al)); \
+- (sl) = __x; \
+- } while (0)
+-
+-#define umul_ppmm(w1, w0, u, v) \
+- do { \
+- UWtype __x0, __x1, __x2, __x3; \
+- UHWtype __ul, __vl, __uh, __vh; \
+- \
+- __ul = __ll_lowpart (u); \
+- __uh = __ll_highpart (u); \
+- __vl = __ll_lowpart (v); \
+- __vh = __ll_highpart (v); \
+- \
+- __x0 = (UWtype) __ul * __vl; \
+- __x1 = (UWtype) __ul * __vh; \
+- __x2 = (UWtype) __uh * __vl; \
+- __x3 = (UWtype) __uh * __vh; \
+- \
+- __x1 += __ll_highpart (__x0);/* this can't give carry */ \
+- __x1 += __x2; /* but this indeed can */ \
+- if (__x1 < __x2) /* did we get it? */ \
+- __x3 += __ll_B; /* yes, add it in the proper pos. */ \
+- \
+- (w1) = __x3 + __ll_highpart (__x1); \
+- (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
+- } while (0)
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/at32ap7000.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/at32ap7000.c
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/at32ap7000.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/at32ap7000.c 2007-03-24 16:42:29.000000000 +0100
+@@ -8,6 +8,7 @@
+ #include <linux/clk.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
++#include <linux/spi/spi.h>
+
+ #include <asm/io.h>
+
+@@ -310,8 +311,6 @@
+ {
+ u32 control;
+
+- BUG_ON(clk->index > 7);
+-
+ control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+ if (enabled)
+ control |= SM_BIT(CEN);
+@@ -325,11 +324,6 @@
+ u32 control;
+ unsigned long div = 1;
+
+- BUG_ON(clk->index > 7);
+-
+- if (!clk->parent)
+- return 0;
+-
+ control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+ if (control & SM_BIT(DIVEN))
+ div = 2 * (SM_BFEXT(DIV, control) + 1);
+@@ -342,11 +336,6 @@
+ u32 control;
+ unsigned long parent_rate, actual_rate, div;
+
+- BUG_ON(clk->index > 7);
+-
+- if (!clk->parent)
+- return 0;
+-
+ parent_rate = clk->parent->get_rate(clk->parent);
+ control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+
+@@ -373,11 +362,8 @@
+ {
+ u32 control;
+
+- BUG_ON(clk->index > 7);
+-
+ printk("clk %s: new parent %s (was %s)\n",
+- clk->name, parent->name,
+- clk->parent ? clk->parent->name : "(null)");
++ clk->name, parent->name, clk->parent->name);
+
+ control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+
+@@ -399,6 +385,22 @@
+ return 0;
+ }
+
++static void __init genclk_init_parent(struct clk *clk)
++{
++ u32 control;
++ struct clk *parent;
++
++ BUG_ON(clk->index > 7);
++
++ control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++ if (control & SM_BIT(OSCSEL))
++ parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
++ else
++ parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
++
++ clk->parent = parent;
++}
++
+ /* --------------------------------------------------------------------
+ * System peripherals
+ * -------------------------------------------------------------------- */
+@@ -464,6 +466,17 @@
+ .users = 1,
+ };
+
++static struct resource dmaca0_resource[] = {
++ {
++ .start = 0xff200000,
++ .end = 0xff20ffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
+ /* --------------------------------------------------------------------
+ * PIO
+ * -------------------------------------------------------------------- */
+@@ -496,19 +509,28 @@
+ DEFINE_DEV(pio, 3);
+ DEV_CLK(mck, pio3, pba, 13);
+
++static struct resource pio4_resource[] = {
++ PBMEM(0xffe03800),
++ IRQ(17),
++};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
++
+ void __init at32_add_system_devices(void)
+ {
+- system_manager.eim_first_irq = NR_INTERNAL_IRQS;
++ system_manager.eim_first_irq = EIM_IRQ_BASE;
+
+ platform_device_register(&at32_sm_device);
+ platform_device_register(&at32_intc0_device);
+ platform_device_register(&smc0_device);
+ platform_device_register(&pdc_device);
++ platform_device_register(&dmaca0_device);
+
+ platform_device_register(&pio0_device);
+ platform_device_register(&pio1_device);
+ platform_device_register(&pio2_device);
+ platform_device_register(&pio3_device);
++ platform_device_register(&pio4_device);
+ }
+
+ /* --------------------------------------------------------------------
+@@ -521,7 +543,7 @@
+ };
+ static struct resource atmel_usart0_resource[] = {
+ PBMEM(0xffe00c00),
+- IRQ(7),
++ IRQ(6),
+ };
+ DEFINE_DEV_DATA(atmel_usart, 0);
+ DEV_CLK(usart, atmel_usart0, pba, 4);
+@@ -583,7 +605,7 @@
+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
+ }
+
+-static struct platform_device *at32_usarts[4];
++static struct platform_device *__initdata at32_usarts[4];
+
+ void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+ {
+@@ -728,32 +750,156 @@
+ /* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+-static struct resource spi0_resource[] = {
++static struct resource atmel_spi0_resource[] = {
+ PBMEM(0xffe00000),
+ IRQ(3),
+ };
+-DEFINE_DEV(spi, 0);
+-DEV_CLK(mck, spi0, pba, 0);
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
++
++static struct resource atmel_spi1_resource[] = {
++ PBMEM(0xffe00400),
++ IRQ(4),
++};
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++ unsigned int n, const u8 *pins)
++{
++ unsigned int pin, mode;
++
++ for (; n; n--, b++) {
++ b->bus_num = bus_num;
++ if (b->chip_select >= 4)
++ continue;
++ pin = (unsigned)b->controller_data;
++ if (!pin) {
++ pin = pins[b->chip_select];
++ b->controller_data = (void *)pin;
++ }
++ mode = AT32_GPIOF_OUTPUT;
++ if (!(b->mode & SPI_CS_HIGH))
++ mode |= AT32_GPIOF_HIGH;
++ at32_select_gpio(pin, mode);
++ }
++}
+
+-struct platform_device *__init at32_add_device_spi(unsigned int id)
++struct platform_device *__init
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+ {
++ /*
++ * Manage the chipselects as GPIOs, normally using the same pins
++ * the SPI controller expects; but boards can use other pins.
++ */
++ static u8 __initdata spi0_pins[] =
++ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++ static u8 __initdata spi1_pins[] =
++ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0:
+- pdev = &spi0_device;
++ pdev = &atmel_spi0_device;
+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+- select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */
+- select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */
+- select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */
++ at32_spi_setup_slaves(0, b, n, spi0_pins);
++ break;
++
++ case 1:
++ pdev = &atmel_spi1_device;
++ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
++ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
++ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
++ at32_spi_setup_slaves(1, b, n, spi1_pins);
+ break;
+
+ default:
+ return NULL;
+ }
+
++ spi_register_board_info(b, n);
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * TWI
++ * -------------------------------------------------------------------- */
++
++static struct resource atmel_twi0_resource[] = {
++ PBMEM(0xffe00800),
++ IRQ(5),
++};
++DEFINE_DEV(atmel_twi, 0);
++DEV_CLK(pclk,atmel_twi0,pba,2);
++
++struct platform_device *__init
++at32_add_device_twi(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_twi0_device;
++ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
++ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */
++ break;
++
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct mci_platform_data atmel_mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
++static struct resource atmel_mci0_resource[] = {
++ PBMEM(0xfff02400),
++ IRQ(28),
++};
++DEFINE_DEV_DATA(atmel_mci, 0);
++DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_mci0_device;
++ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
++ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
++ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
++ break;
++ default:
++ return NULL;
++ }
++
++ if (data) {
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, 0);
++ if (data->wp_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->wp_pin, 0);
++ memcpy(pdev->dev.platform_data, data,
++ sizeof(struct mci_platform_data));
++ }
++
+ platform_device_register(pdev);
+ return pdev;
+ }
+@@ -837,6 +983,199 @@
+ return pdev;
+ }
+
++/* --------------------------------------------------------------------
++ * USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] = {
++ {
++ .start = 0xff300000,
++ .end = 0xff3fffff,
++ .flags = IORESOURCE_MEM,
++ },
++ PBMEM(0xfff03000),
++ IRQ(31),
++};
++DEFINE_DEV(usba, 0);
++DEV_CLK(pclk, usba0, pbb, 12);
++DEV_CLK(hclk, usba0, hsb, 6);
++
++struct platform_device *__init at32_add_device_usba(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &usba0_device;
++ /* USB pads are not multiplexed */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] = {
++ PBMEM(0xfff02800),
++ IRQ(29),
++};
++DEFINE_DEV(atmel_ac97c, 0);
++DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
++
++struct platform_device *__init
++at32_add_device_ac97c(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_ac97c0_device;
++ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * DAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] = {
++ PBMEM(0xfff02000),
++ IRQ(27),
++};
++DEFINE_DEV(abdac, 0);
++DEV_CLK(pclk, abdac0, pbb, 8);
++static struct clk abdac0_sample_clk = {
++ .name = "sample_clk",
++ .dev = &abdac0_device.dev,
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 6,
++};
++
++struct platform_device *__init
++at32_add_device_abdac(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &abdac0_device;
++ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
++ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * ISI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_isi0_resource[] = {
++ PBMEM(0xfff02c00),
++ IRQ(30),
++};
++DEFINE_DEV(atmel_isi, 0);
++DEV_CLK(hclk, atmel_isi0, hsb, 5);
++DEV_CLK(pclk, atmel_isi0, pbb, 11);
++
++struct platform_device *__init
++at32_add_device_isi(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_isi0_device;
++ select_peripheral(PB(0), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PB(1), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PB(2), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PB(3), PERIPH_A, 0); /* DATA3 */
++ select_peripheral(PB(4), PERIPH_A, 0); /* DATA4 */
++ select_peripheral(PB(5), PERIPH_A, 0); /* DATA5 */
++ select_peripheral(PB(6), PERIPH_A, 0); /* DATA6 */
++ select_peripheral(PB(7), PERIPH_A, 0); /* DATA7 */
++ select_peripheral(PB(11), PERIPH_B, 0); /* DATA8 */
++ select_peripheral(PB(12), PERIPH_B, 0); /* DATA9 */
++ select_peripheral(PB(13), PERIPH_B, 0); /* DATA10 */
++ select_peripheral(PB(14), PERIPH_B, 0); /* DATA11 */
++ select_peripheral(PB(8), PERIPH_A, 0); /* HSYNC */
++ select_peripheral(PB(9), PERIPH_A, 0); /* VSYNC */
++ select_peripheral(PB(10), PERIPH_A, 0); /* PCLK */
++ break;
++
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++ .name = "gclk0",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 0,
++};
++static struct clk gclk1 = {
++ .name = "gclk1",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 1,
++};
++static struct clk gclk2 = {
++ .name = "gclk2",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 2,
++};
++static struct clk gclk3 = {
++ .name = "gclk3",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 3,
++};
++static struct clk gclk4 = {
++ .name = "gclk4",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 4,
++};
++
+ struct clk *at32_clock_list[] = {
+ &osc32k,
+ &osc0,
+@@ -855,11 +1194,13 @@
+ &smc0_mck,
+ &pdc_hclk,
+ &pdc_pclk,
++ &dmaca0_hclk,
+ &pico_clk,
+ &pio0_mck,
+ &pio1_mck,
+ &pio2_mck,
+ &pio3_mck,
++ &pio4_mck,
+ &atmel_usart0_usart,
+ &atmel_usart1_usart,
+ &atmel_usart2_usart,
+@@ -868,9 +1209,24 @@
+ &macb0_pclk,
+ &macb1_hclk,
+ &macb1_pclk,
+- &spi0_mck,
++ &atmel_spi0_spi_clk,
++ &atmel_spi1_spi_clk,
++ &atmel_twi0_pclk,
++ &atmel_mci0_mci_clk,
+ &lcdc0_hclk,
+ &lcdc0_pixclk,
++ &usba0_pclk,
++ &usba0_hclk,
++ &atmel_ac97c0_pclk,
++ &abdac0_pclk,
++ &abdac0_sample_clk,
++ &gclk0,
++ &gclk1,
++ &gclk2,
++ &gclk3,
++ &gclk4,
++ &atmel_isi0_hclk,
++ &atmel_isi0_pclk,
+ };
+ unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+
+@@ -880,6 +1236,7 @@
+ at32_init_pio(&pio1_device);
+ at32_init_pio(&pio2_device);
+ at32_init_pio(&pio3_device);
++ at32_init_pio(&pio4_device);
+ }
+
+ void __init at32_clock_init(void)
+@@ -898,6 +1255,14 @@
+ if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
+ pll1.parent = &osc1;
+
++ genclk_init_parent(&gclk0);
++ genclk_init_parent(&gclk1);
++ genclk_init_parent(&gclk2);
++ genclk_init_parent(&gclk3);
++ genclk_init_parent(&gclk4);
++ genclk_init_parent(&lcdc0_pixclk);
++ genclk_init_parent(&abdac0_sample_clk);
++
+ /*
+ * Turn on all clocks that have at least one user already, and
+ * turn off everything else. We only do this for module
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/clock.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/clock.c
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/clock.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/clock.c 2007-03-24 16:42:28.000000000 +0100
+@@ -63,7 +63,11 @@
+
+ static void __clk_disable(struct clk *clk)
+ {
+- BUG_ON(clk->users == 0);
++ if (clk->users == 0) {
++ printk(KERN_ERR "%s: mismatched disable\n", clk->name);
++ WARN_ON(1);
++ return;
++ }
+
+ if (--clk->users == 0 && clk->mode)
+ clk->mode(clk, 0);
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/extint.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/extint.c
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/extint.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/extint.c 2007-03-24 16:42:28.000000000 +0100
+@@ -55,20 +55,11 @@
+ unsigned long flags;
+ int ret = 0;
+
++ flow_type &= IRQ_TYPE_SENSE_MASK;
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc = &irq_desc[irq];
+- desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+- desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+-
+- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+- desc->status |= IRQ_LEVEL;
+- set_irq_handler(irq, handle_level_irq);
+- } else {
+- set_irq_handler(irq, handle_edge_irq);
+- }
+-
+ spin_lock_irqsave(&sm->lock, flags);
+
+ mode = sm_readl(sm, EIM_MODE);
+@@ -97,9 +88,16 @@
+ break;
+ }
+
+- sm_writel(sm, EIM_MODE, mode);
+- sm_writel(sm, EIM_EDGE, edge);
+- sm_writel(sm, EIM_LEVEL, level);
++ if (ret == 0) {
++ sm_writel(sm, EIM_MODE, mode);
++ sm_writel(sm, EIM_EDGE, edge);
++ sm_writel(sm, EIM_LEVEL, level);
++
++ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++ flow_type |= IRQ_LEVEL;
++ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
++ desc->status |= flow_type;
++ }
+
+ spin_unlock_irqrestore(&sm->lock, flags);
+
+@@ -122,8 +120,6 @@
+ unsigned long status, pending;
+ unsigned int i, ext_irq;
+
+- spin_lock(&sm->lock);
+-
+ status = sm_readl(sm, EIM_ISR);
+ pending = status & sm_readl(sm, EIM_IMR);
+
+@@ -133,10 +129,11 @@
+
+ ext_irq = i + sm->eim_first_irq;
+ ext_desc = irq_desc + ext_irq;
+- ext_desc->handle_irq(ext_irq, ext_desc);
++ if (ext_desc->status & IRQ_LEVEL)
++ handle_level_irq(ext_irq, ext_desc);
++ else
++ handle_edge_irq(ext_irq, ext_desc);
+ }
+-
+- spin_unlock(&sm->lock);
+ }
+
+ static int __init eim_init(void)
+@@ -168,8 +165,9 @@
+ sm->eim_chip = &eim_chip;
+
+ for (i = 0; i < nr_irqs; i++) {
++ /* NOTE the handler we set here is ignored by the demux */
+ set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
+- handle_edge_irq);
++ handle_level_irq);
+ set_irq_chip_data(sm->eim_first_irq + i, sm);
+ }
+
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/hsmc.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/hsmc.c
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/hsmc.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/hsmc.c 2007-03-24 16:42:29.000000000 +0100
+@@ -75,12 +75,35 @@
+ return -EINVAL;
+ }
+
++ switch (config->nwait_mode) {
++ case 0:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
++ break;
++ case 1:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
++ break;
++ case 2:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
++ break;
++ case 3:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (config->tdf_cycles) {
++ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
++ }
++
+ if (config->nrd_controlled)
+ mode |= HSMC_BIT(READ_MODE);
+ if (config->nwe_controlled)
+ mode |= HSMC_BIT(WRITE_MODE);
+ if (config->byte_write)
+ mode |= HSMC_BIT(BAT);
++ if (config->tdf_mode)
++ mode |= HSMC_BIT(TDF_MODE);
+
+ pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
+ cs, setup, pulse, cycle, mode);
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Kconfig linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Kconfig
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,15 @@
++if PLATFORM_AT32AP
++
++menu "Atmel AVR32 AP options"
++
++config PIO_DEV
++ bool "PIO /dev interface"
++ select CONFIGFS_FS
++ default y
++ help
++ Say `Y' to enable a /dev interface to the Parallel I/O
++ Controller.
++
++endmenu
++
++endif
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Makefile linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Makefile
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Makefile 2007-03-24 16:42:28.000000000 +0100
+@@ -1,2 +1,2 @@
+-obj-y += at32ap.o clock.o pio.o intc.o extint.o hsmc.o
++obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+ obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/pio.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/pio.c
+--- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/pio.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/pio.c 2007-03-24 16:42:29.000000000 +0100
+@@ -12,7 +12,9 @@
+ #include <linux/debugfs.h>
+ #include <linux/fs.h>
+ #include <linux/platform_device.h>
++#include <linux/irq.h>
+
++#include <asm/gpio.h>
+ #include <asm/io.h>
+
+ #include <asm/arch/portmux.h>
+@@ -23,10 +25,11 @@
+
+ struct pio_device {
+ void __iomem *regs;
+- const struct platform_device *pdev;
++ struct platform_device *pdev;
+ struct clk *clk;
+ u32 pinmux_mask;
+- char name[32];
++ u32 gpio_mask;
++ char name[8];
+ };
+
+ static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
+@@ -76,6 +79,9 @@
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
++ /* gpio_request NOT allowed */
++ set_bit(pin_index, &pio->gpio_mask);
++
+ return;
+
+ fail:
+@@ -99,19 +105,52 @@
+ goto fail;
+ }
+
+- pio_writel(pio, PUER, mask);
+- if (flags & AT32_GPIOF_HIGH)
+- pio_writel(pio, SODR, mask);
+- else
+- pio_writel(pio, CODR, mask);
+- if (flags & AT32_GPIOF_OUTPUT)
++ if (flags & AT32_GPIOF_OUTPUT) {
++ if (flags & AT32_GPIOF_HIGH)
++ pio_writel(pio, SODR, mask);
++ else
++ pio_writel(pio, CODR, mask);
++ pio_writel(pio, PUDR, mask);
+ pio_writel(pio, OER, mask);
+- else
++ } else {
++ if (flags & AT32_GPIOF_PULLUP)
++ pio_writel(pio, PUER, mask);
++ else
++ pio_writel(pio, PUDR, mask);
++ if (flags & AT32_GPIOF_DEGLITCH)
++ pio_writel(pio, IFER, mask);
++ else
++ pio_writel(pio, IFDR, mask);
+ pio_writel(pio, ODR, mask);
++ }
+
+ pio_writel(pio, PER, mask);
+- if (!(flags & AT32_GPIOF_PULLUP))
+- pio_writel(pio, PUDR, mask);
++
++ /* gpio_request now allowed */
++ clear_bit(pin_index, &pio->gpio_mask);
++
++ return;
++
++fail:
++ dump_stack();
++}
++
++/* Reserve a pin, preventing anyone else from changing its configuration. */
++void __init at32_reserve_pin(unsigned int pin)
++{
++ struct pio_device *pio;
++ unsigned int pin_index = pin & 0x1f;
++
++ pio = gpio_to_pio(pin);
++ if (unlikely(!pio)) {
++ printk("pio: invalid pin %u\n", pin);
++ goto fail;
++ }
++
++ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
++ printk("%s: pin %u is busy\n", pio->name, pin_index);
++ goto fail;
++ }
+
+ return;
+
+@@ -119,20 +158,793 @@
+ dump_stack();
+ }
+
++/*--------------------------------------------------------------------------*/
++
++static unsigned int pio_id(struct pio_device *pio)
++{
++ return pio - pio_dev;
++}
++
++static void __disable_gpio(struct pio_device *pio, u32 mask)
++{
++ pio_writel(pio, PUER, mask);
++ pio_writel(pio, ODR, mask);
++}
++
++static void pio_dealloc_mask(struct pio_device *pio, u32 mask)
++{
++ u32 old, new;
++
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~mask;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++/* GPIO API */
++
++int gpio_request(unsigned int gpio, const char *label)
++{
++ struct pio_device *pio;
++ unsigned int pin;
++
++ pio = gpio_to_pio(gpio);
++ if (!pio)
++ return -ENODEV;
++
++ pin = gpio & 0x1f;
++ if (test_and_set_bit(pin, &pio->gpio_mask))
++ return -EBUSY;
++
++ return 0;
++}
++EXPORT_SYMBOL(gpio_request);
++
++void gpio_free(unsigned int gpio)
++{
++ struct pio_device *pio;
++ unsigned int pin;
++
++ pio = gpio_to_pio(gpio);
++ if (!pio) {
++ printk(KERN_ERR
++ "gpio: attempted to free invalid pin %u\n", gpio);
++ return;
++ }
++
++ pin = gpio & 0x1f;
++ if (!test_and_clear_bit(pin, &pio->gpio_mask))
++ printk(KERN_ERR "gpio: freeing free or non-gpio pin %s-%u\n",
++ pio->name, pin);
++}
++EXPORT_SYMBOL(gpio_free);
++
++int gpio_direction_input(unsigned int gpio)
++{
++ struct pio_device *pio;
++ unsigned int pin;
++
++ pio = gpio_to_pio(gpio);
++ if (!pio)
++ return -ENODEV;
++
++ pin = gpio & 0x1f;
++ pio_writel(pio, ODR, 1 << pin);
++
++ return 0;
++}
++EXPORT_SYMBOL(gpio_direction_input);
++
++int gpio_direction_output(unsigned int gpio)
++{
++ struct pio_device *pio;
++ unsigned int pin;
++
++ pio = gpio_to_pio(gpio);
++ if (!pio)
++ return -ENODEV;
++
++ pin = gpio & 0x1f;
++ pio_writel(pio, OER, 1 << pin);
++
++ return 0;
++}
++EXPORT_SYMBOL(gpio_direction_output);
++
++int gpio_get_value(unsigned int gpio)
++{
++ struct pio_device *pio = &pio_dev[gpio >> 5];
++
++ return (pio_readl(pio, PDSR) >> (gpio & 0x1f)) & 1;
++}
++EXPORT_SYMBOL(gpio_get_value);
++
++void gpio_set_value(unsigned int gpio, int value)
++{
++ struct pio_device *pio = &pio_dev[gpio >> 5];
++ u32 mask;
++
++ mask = 1 << (gpio & 0x1f);
++ if (value)
++ pio_writel(pio, SODR, mask);
++ else
++ pio_writel(pio, CODR, mask);
++}
++EXPORT_SYMBOL(gpio_set_value);
++
++/*--------------------------------------------------------------------------*/
++
++/* GPIO IRQ support */
++
++static void gpio_irq_mask(unsigned irq)
++{
++ unsigned gpio = irq_to_gpio(irq);
++ struct pio_device *pio = &pio_dev[gpio >> 5];
++
++ pio_writel(pio, IDR, 1 << (gpio & 0x1f));
++}
++
++static void gpio_irq_unmask(unsigned irq)
++{
++ unsigned gpio = irq_to_gpio(irq);
++ struct pio_device *pio = &pio_dev[gpio >> 5];
++
++ pio_writel(pio, IER, 1 << (gpio & 0x1f));
++}
++
++static int gpio_irq_type(unsigned irq, unsigned type)
++{
++ if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE)
++ return -EINVAL;
++
++ return 0;
++}
++
++static struct irq_chip gpio_irqchip = {
++ .name = "gpio",
++ .mask = gpio_irq_mask,
++ .unmask = gpio_irq_unmask,
++ .set_type = gpio_irq_type,
++};
++
++static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
++{
++ struct pio_device *pio = get_irq_chip_data(irq);
++ unsigned gpio_irq;
++
++ gpio_irq = (unsigned) get_irq_data(irq);
++ for (;;) {
++ u32 isr;
++ struct irq_desc *d;
++
++ /* ack pending GPIO interrupts */
++ isr = pio_readl(pio, ISR) & pio_readl(pio, IMR);
++ if (!isr)
++ break;
++ do {
++ int i;
++
++ i = ffs(isr) - 1;
++ isr &= ~(1 << i);
++
++ i += gpio_irq;
++ d = &irq_desc[i];
++
++ d->handle_irq(i, d);
++ } while (isr);
++ }
++}
++
++static void __init
++gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq)
++{
++ unsigned i;
++
++ set_irq_chip_data(irq, pio);
++ set_irq_data(irq, (void *) gpio_irq);
++
++ for (i = 0; i < 32; i++, gpio_irq++) {
++ set_irq_chip_data(gpio_irq, pio);
++ set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
++ handle_simple_irq);
++ }
++
++ set_irq_chained_handler(irq, gpio_irq_handler);
++}
++
++/*--------------------------------------------------------------------------*/
++
++#ifdef CONFIG_PIO_DEV
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#define GPIO_DEV_MAX 8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++ spinlock_t lock;
++
++ struct pio_device *pio;
++
++ int enabled;
++ int pio_id;
++ u32 pin_mask;
++ u32 oe_mask;
++
++ /* Pin state last time we read it (for blocking reads) */
++ u32 pin_state;
++ int changed;
++
++ wait_queue_head_t change_wq;
++ struct fasync_struct *async_queue;
++
++ int id;
++ struct class_device *gpio_dev;
++ struct cdev char_dev;
++ struct config_item item;
++};
++
++struct gpio_attribute {
++ struct configfs_attribute attr;
++ ssize_t (*show)(struct gpio_item *, char *);
++ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++ struct gpio_item *gpio = dev_id;
++ u32 old_state, new_state;
++
++ old_state = gpio->pin_state;
++ new_state = pio_readl(gpio->pio, PDSR);
++ gpio->pin_state = new_state;
++
++ if (new_state != old_state) {
++ gpio->changed = 1;
++ wake_up_interruptible(&gpio->change_wq);
++
++ if (gpio->async_queue)
++ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = container_of(inode->i_cdev,
++ struct gpio_item,
++ char_dev);
++ unsigned int irq;
++ unsigned int i;
++ int ret;
++
++ nonseekable_open(inode, file);
++ config_item_get(&gpio->item);
++ file->private_data = gpio;
++
++ gpio->pin_state = pio_readl(gpio->pio, PDSR) & gpio->pin_mask;
++ gpio->changed = 1;
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
++ ret = request_irq(irq, gpio_dev_interrupt, 0,
++ "gpio-dev", gpio);
++ if (ret)
++ goto err_irq;
++ }
++ }
++
++ return 0;
++
++err_irq:
++ while (i--) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++ struct gpio_item *gpio = file->private_data;
++
++ return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int irq;
++ unsigned int i;
++
++ gpio_dev_fasync(-1, file, 0);
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int mask = 0;
++
++ poll_wait(file, &gpio->change_wq, wait);
++ if (gpio->changed)
++ mask |= POLLIN | POLLRDNORM;
++
++ return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value;
++
++ spin_lock_irq(&gpio->lock);
++ while (!gpio->changed) {
++ spin_unlock_irq(&gpio->lock);
++
++ if (file->f_flags & O_NONBLOCK)
++ return -EAGAIN;
++
++ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++ return -ERESTARTSYS;
++
++ spin_lock_irq(&gpio->lock);
++ }
++
++ gpio->changed = 0;
++ value = pio_readl(gpio->pio, PDSR) & gpio->pin_mask;
++
++ spin_unlock_irq(&gpio->lock);
++
++ count = min(count, (size_t)4);
++ if (copy_to_user(buf, &value, count))
++ return -EFAULT;
++
++ return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value = 0;
++ u32 mask = ~0UL;
++
++ count = min(count, (size_t)4);
++ if (copy_from_user(&value, buf, count))
++ return -EFAULT;
++
++ /* Assuming big endian */
++ mask <<= (4 - count) * 8;
++ mask &= gpio->pin_mask;
++
++ pio_writel(gpio->pio, CODR, ~value & mask);
++ pio_writel(gpio->pio, SODR, value & mask);
++
++ return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .open = gpio_dev_open,
++ .release = gpio_dev_release,
++ .fasync = gpio_dev_fasync,
++ .poll = gpio_dev_poll,
++ .read = gpio_dev_read,
++ .write = gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++ return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->pio_id);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ unsigned long id;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ id = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Switching PIO is not allowed when live... */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ ret = -ENXIO;
++ if ((id < MAX_NR_PIO_DEVICES) && pio_dev[id].regs) {
++ gpio->pio_id = id;
++ ret = count;
++ }
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 new_mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ new_mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Can't update the pin mask while live. */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask &= new_mask;
++ gpio->pin_mask = new_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask = mask & gpio->pin_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ struct pio_device *pio;
++ u32 old, new;
++ char *p = (char *)page;
++ int enabled;
++ int ret;
++
++ enabled = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* make it a boolean value */
++ enabled = !!enabled;
++
++ if (gpio->enabled == enabled)
++ /* Already enabled; do nothing. */
++ return count;
++
++ BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++ if (!enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ __disable_gpio(gpio->pio, gpio->pin_mask);
++ pio_dealloc_mask(gpio->pio, gpio->pin_mask);
++ gpio->pio = NULL;
++ } else {
++ if (gpio->pio_id < 0 || !gpio->pin_mask)
++ return -ENODEV;
++ }
++
++ /* Disallow any updates to gpio_id or pin_mask */
++ spin_lock(&gpio->lock);
++ gpio->enabled = enabled;
++ spin_unlock(&gpio->lock);
++
++ if (!enabled)
++ return count;
++
++ /* Now, try to allocate the pins */
++ ret = -EBUSY;
++ pio = gpio->pio = &pio_dev[gpio->pio_id];
++ do {
++ old = pio->pinmux_mask;
++ if (old & gpio->pin_mask)
++ goto err_alloc_pins;
++
++ new = old | gpio->pin_mask;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++ pio_writel(pio, OER, gpio->oe_mask);
++ pio_writel(pio, PER, gpio->pin_mask);
++
++ cdev_init(&gpio->char_dev, &gpio_dev_fops);
++ gpio->char_dev.owner = THIS_MODULE;
++ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++ if (ret < 0)
++ goto err_cdev_add;
++ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++ MKDEV(MAJOR(gpio_devt), gpio->id),
++ &gpio->pio->pdev->dev,
++ "gpio%d", gpio->id);
++ if (IS_ERR(gpio->gpio_dev)) {
++ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++ ret = PTR_ERR(gpio->gpio_dev);
++ goto err_class_dev;
++ }
++
++ printk(KERN_INFO "created gpio%d (pio%d/0x%08x) as (%d:%d)\n",
++ gpio->id, pio_id(gpio->pio), gpio->pin_mask,
++ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++ return 0;
++
++err_class_dev:
++ cdev_del(&gpio->char_dev);
++err_cdev_add:
++ __disable_gpio(pio, gpio->pin_mask);
++ pio_dealloc_mask(pio, gpio->pin_mask);
++err_alloc_pins:
++ spin_lock(&gpio->lock);
++ gpio->enabled = 0;
++ spin_unlock(&gpio->lock);
++ gpio->pio = NULL;
++
++ return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_id",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_gpio_id,
++ .store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "pin_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_pin_mask,
++ .store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "oe_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_oe_mask,
++ .store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "enabled",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_enabled,
++ .store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++ &gpio_item_attr_gpio_id.attr,
++ &gpio_item_attr_pin_mask.attr,
++ &gpio_item_attr_oe_mask.attr,
++ &gpio_item_attr_enabled.attr,
++ NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = 0;
++
++ if (gpio_attr->show)
++ ret = gpio_attr->show(gpio_item, page);
++ return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = -EINVAL;
++
++ if (gpio_attr->store)
++ ret = gpio_attr->store(gpio_item, page, count);
++ return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++ kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++ .release = gpio_release,
++ .show_attribute = gpio_show_attr,
++ .store_attribute = gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++ .ct_item_ops = &gpio_item_ops,
++ .ct_attrs = gpio_item_attrs,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++ const char *name)
++{
++ static int next_id;
++ struct gpio_item *gpio;
++
++ if (next_id >= GPIO_DEV_MAX)
++ return NULL;
++
++ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++ if (!gpio)
++ return NULL;
++
++ gpio->id = next_id++;
++ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++ spin_lock_init(&gpio->lock);
++ init_waitqueue_head(&gpio->change_wq);
++
++ return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++ struct config_item *item)
++{
++ struct gpio_item *gpio = to_gpio_item(item);
++ struct pio_device *pio;
++
++ spin_lock(&gpio->lock);
++ if (gpio->enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ }
++
++ pio = gpio->pio;
++ if (pio) {
++ __disable_gpio(pio, gpio->pin_mask);
++ pio_dealloc_mask(pio, gpio->pin_mask);
++ gpio->pio = NULL;
++ }
++ spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++ .make_item = gpio_make_item,
++ .drop_item = gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++ .ct_group_ops = &gpio_group_ops,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = "gpio",
++ .ci_type = &gpio_group_type,
++ },
++ },
++};
++
++static int __init pio_init_dev(void)
++{
++ int err;
++
++ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++ if (IS_ERR(gpio_dev_class)) {
++ err = PTR_ERR(gpio_dev_class);
++ goto err_class_create;
++ }
++
++ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++ if (err < 0)
++ goto err_alloc_chrdev;
++
++ /* Configfs initialization */
++ config_group_init(&gpio_subsys.su_group);
++ init_MUTEX(&gpio_subsys.su_sem);
++ err = configfs_register_subsystem(&gpio_subsys);
++ if (err)
++ goto err_register_subsys;
++
++ return 0;
++
++err_register_subsys:
++ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++ class_destroy(gpio_dev_class);
++err_class_create:
++ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++ return err;
++}
++late_initcall(pio_init_dev);
++#endif /* CONFIG_PIO_DEV */
++
+ static int __init pio_probe(struct platform_device *pdev)
+ {
+ struct pio_device *pio = NULL;
++ int irq = platform_get_irq(pdev, 0);
++ int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32;
+
+ BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES);
+ pio = &pio_dev[pdev->id];
+ BUG_ON(!pio->regs);
+
+- /* TODO: Interrupts */
++ gpio_irq_setup(pio, irq, gpio_irq_base);
+
+ platform_set_drvdata(pdev, pio);
+
+- printk(KERN_INFO "%s: Atmel Port Multiplexer at 0x%p (irq %d)\n",
+- pio->name, pio->regs, platform_get_irq(pdev, 0));
++ printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n",
++ pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31);
+
+ return 0;
+ }
+@@ -148,7 +960,7 @@
+ {
+ return platform_driver_register(&pio_driver);
+ }
+-subsys_initcall(pio_init);
++postcore_initcall(pio_init);
+
+ void __init at32_init_pio(struct platform_device *pdev)
+ {
+@@ -184,6 +996,13 @@
+ pio->pdev = pdev;
+ pio->regs = ioremap(regs->start, regs->end - regs->start + 1);
+
+- pio_writel(pio, ODR, ~0UL);
+- pio_writel(pio, PER, ~0UL);
++ /*
++ * request_gpio() is only valid for pins that have been
++ * explicitly configured as GPIO and not previously requested
++ */
++ pio->gpio_mask = ~0UL;
++
++ /* start with irqs disabled and acked */
++ pio_writel(pio, IDR, ~0UL);
++ (void) pio_readl(pio, ISR);
+ }
+diff -urN linux-2.6.20.4-0rig/arch/avr32/Makefile linux-2.6.20.4-atmel/arch/avr32/Makefile
+--- linux-2.6.20.4-0rig/arch/avr32/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -30,6 +30,8 @@
+ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
++drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mm/cache.c linux-2.6.20.4-atmel/arch/avr32/mm/cache.c
+--- linux-2.6.20.4-0rig/arch/avr32/mm/cache.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mm/cache.c 2007-03-24 16:42:28.000000000 +0100
+@@ -22,18 +22,34 @@
+
+ void invalidate_dcache_region(void *start, size_t size)
+ {
+- unsigned long v, begin, end, linesz;
++ unsigned long v, begin, end, linesz, mask;
++ int flush = 0;
+
+ linesz = boot_cpu_data.dcache.linesz;
++ mask = linesz - 1;
+
+- //printk("invalidate dcache: %p + %u\n", start, size);
+-
+- /* You asked for it, you got it */
+- begin = (unsigned long)start & ~(linesz - 1);
+- end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
++ /* when first and/or last cachelines are shared, flush them
++ * instead of invalidating ... never discard valid data!
++ */
++ begin = (unsigned long)start;
++ end = begin + size - 1;
++
++ if (begin & mask) {
++ flush_dcache_line(start);
++ begin += linesz;
++ flush = 1;
++ }
++ if ((end & mask) != mask) {
++ flush_dcache_line((void *)end);
++ end -= linesz;
++ flush = 1;
++ }
+
+- for (v = begin; v < end; v += linesz)
++ /* remaining cachelines only need invalidation */
++ for (v = begin; v <= end; v += linesz)
+ invalidate_dcache_line((void *)v);
++ if (flush)
++ flush_write_buffer();
+ }
+
+ void clean_dcache_region(void *start, size_t size)
+diff -urN linux-2.6.20.4-0rig/arch/avr32/mm/dma-coherent.c linux-2.6.20.4-atmel/arch/avr32/mm/dma-coherent.c
+--- linux-2.6.20.4-0rig/arch/avr32/mm/dma-coherent.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/mm/dma-coherent.c 2007-03-24 16:42:29.000000000 +0100
+@@ -41,6 +41,13 @@
+ struct page *page, *free, *end;
+ int order;
+
++ /* Following is a work-around (a.k.a. hack) to prevent pages
++ * with __GFP_COMP being passed to split_page() which cannot
++ * handle them. The real problem is that this flag probably
++ * should be 0 on AVR32 as it is not supported on this
++ * platform--see CONFIG_HUGETLB_PAGE. */
++ gfp &= ~(__GFP_COMP);
++
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
+
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/common.c linux-2.6.20.4-atmel/arch/avr32/oprofile/common.c
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/common.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/common.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,169 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++
++#define DEBUG
++#include <linux/init.h>
++#include <linux/oprofile.h>
++#include <linux/errno.h>
++#include <asm/semaphore.h>
++#include <linux/sysdev.h>
++
++#include "op_avr32_model.h"
++#include "op_counter.h"
++
++static struct op_avr32_model_spec *pc_model;
++static int pc_enabled = 0;
++static struct semaphore pc_sem;
++
++
++static int pc_start(void);
++static int pc_setup(void);
++static void pc_stop(void);
++static int pc_create_files(struct super_block *, struct dentry *);
++
++
++struct op_counter_config counter_config[OP_MAX_COUNTER];
++
++static int pc_suspend(struct sys_device *dev, u32 state)
++{
++ if (pc_enabled)
++ pc_stop();
++ return 0;
++}
++
++static int pc_resume(struct sys_device *dev)
++{
++ if (pc_enabled)
++ pc_start();
++ return 0;
++}
++
++static struct sysdev_class oprofile_sysclass = {
++ set_kset_name("oprofile"),
++ .resume = pc_resume,
++ .suspend = pc_suspend,
++};
++
++static struct sys_device device_oprofile = {
++ .id = 0,
++ .cls = &oprofile_sysclass,
++};
++
++static int __init init_driverfs(void)
++{
++ int ret;
++
++ if (!(ret = sysdev_class_register(&oprofile_sysclass)))
++ ret = sysdev_register(&device_oprofile);
++
++ return ret;
++}
++
++static void exit_driverfs(void)
++{
++ sysdev_unregister(&device_oprofile);
++ sysdev_class_unregister(&oprofile_sysclass);
++}
++
++static int pc_create_files(struct super_block *sb, struct dentry *root)
++{
++ unsigned int i;
++
++ pr_debug("AVR32 Peformance Counters: create files\n");
++ for (i = 0; i < pc_model->num_counters; i++) {
++ struct dentry *dir;
++ char buf[2];
++
++ snprintf(buf, sizeof buf, "%d", i);
++ dir = oprofilefs_mkdir(sb, root, buf);
++ oprofilefs_create_ulong(sb, dir, "enabled",
++ &counter_config[i].enabled);
++ oprofilefs_create_ulong(sb, dir, "event",
++ &counter_config[i].event);
++ oprofilefs_create_ulong(sb, dir, "count",
++ &counter_config[i].count);
++ oprofilefs_create_ulong(sb, dir, "unit_mask",
++ &counter_config[i].unit_mask);
++ oprofilefs_create_ulong(sb, dir, "kernel",
++ &counter_config[i].kernel);
++ oprofilefs_create_ulong(sb, dir, "user",
++ &counter_config[i].user);
++ }
++
++ return 0;
++}
++
++static int pc_setup(void)
++{
++ int ret;
++
++ spin_lock(&oprofilefs_lock);
++ pr_debug("AVR32 Peformance Counters: setup\n");
++ ret = pc_model->setup_ctrs();
++ spin_unlock(&oprofilefs_lock);
++ return ret;
++}
++
++static int pc_start(void)
++{
++ int ret = -EBUSY;
++
++ down(&pc_sem);
++ if (!pc_enabled) {
++ pr_debug("AVR32 Peformance Counters: start\n");
++ ret = pc_model->start();
++ pc_enabled = !ret;
++ }
++ up(&pc_sem);
++ return ret;
++}
++
++static void pc_stop(void)
++{
++ down(&pc_sem);
++ pr_debug("AVR32 Peformance Counters: stop\n");
++ if (pc_enabled)
++ pc_model->stop();
++ pc_enabled = 0;
++ up(&pc_sem);
++}
++
++int __init pc_init(struct oprofile_operations *ops,
++ struct op_avr32_model_spec *spec)
++{
++ init_MUTEX(&pc_sem);
++
++ if ( spec->init )
++ if (spec->init() < 0)
++ return -ENODEV;
++
++ pc_model = spec;
++ init_driverfs();
++ ops->create_files = pc_create_files;
++ ops->setup = pc_setup;
++ ops->shutdown = pc_stop;
++ ops->start = pc_start;
++ ops->stop = pc_stop;
++ ops->cpu_type = pc_model->name;
++ printk(KERN_INFO "oprofile: using %s Performance Counters\n",
++ spec->name);
++ pr_debug("AVR32 Peformance Counters: pc_init\n");
++
++ return 0;
++}
++
++void pc_exit(void)
++{
++ if (pc_model) {
++ pr_debug("AVR32 Peformance Counters: exit\n");
++ exit_driverfs();
++ pc_model = NULL;
++ }
++}
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/init.c linux-2.6.20.4-atmel/arch/avr32/oprofile/init.c
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/init.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++
++#include <linux/oprofile.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include "op_avr32_model.h"
++#include "op_model_avr32.h"
++
++int __init oprofile_arch_init(struct oprofile_operations *ops)
++{
++ int ret = -ENODEV;
++
++ ret = pc_init(ops, &op_avr32_spec);
++
++ return ret;
++}
++
++void oprofile_arch_exit(void)
++{
++ pc_exit();
++}
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/Kconfig linux-2.6.20.4-atmel/arch/avr32/oprofile/Kconfig
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,23 @@
++
++menu "Profiling support"
++ depends on EXPERIMENTAL
++
++config PROFILING
++ bool "Profiling support (EXPERIMENTAL)"
++ help
++ Say Y here to enable the extended profiling support mechanisms used
++ by profilers such as OProfile.
++
++
++config OPROFILE
++ tristate "OProfile system profiling (EXPERIMENTAL)"
++ depends on PROFILING
++ help
++ OProfile is a profiling system capable of profiling the
++ whole system, including the kernel, kernel modules, libraries,
++ and applications.
++
++ If unsure, say N.
++
++endmenu
++
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/Makefile linux-2.6.20.4-atmel/arch/avr32/oprofile/Makefile
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,10 @@
++obj-$(CONFIG_OPROFILE) += oprofile.o
++
++DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
++ oprof.o cpu_buffer.o buffer_sync.o \
++ event_buffer.o oprofile_files.o \
++ oprofilefs.o oprofile_stats.o \
++ timer_int.o )
++
++oprofile-y := $(DRIVER_OBJS) init.o common.o
++oprofile-y += op_model_avr32.o
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_avr32_model.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_avr32_model.h
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_avr32_model.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_avr32_model.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,25 @@
++/*
++ * interface to AVR32 machine specific operations
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++
++#ifndef OP_AVR32_MODEL_H
++#define OP_AVR32_MODEL_H
++
++struct op_avr32_model_spec {
++ int (*init)(void);
++ unsigned int num_counters;
++ int (*setup_ctrs)(void);
++ int (*start)(void);
++ void (*stop)(void);
++ char *name;
++};
++
++#endif /* OP_AVR32_MODEL_H */
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_counter.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_counter.h
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_counter.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_counter.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++#ifndef OP_COUNTER_H
++#define OP_COUNTER_H
++
++#define OP_MAX_COUNTER 3
++
++/* Per performance monitor configuration as set via
++ * oprofilefs.
++ */
++struct op_counter_config {
++ unsigned long count;
++ unsigned long enabled;
++ unsigned long event;
++ unsigned long unit_mask;
++ unsigned long kernel;
++ unsigned long user;
++};
++
++extern struct op_counter_config counter_config[];
++
++#endif /* OP_COUNTER_H */
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.c linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.c
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,222 @@
++/*
++ * AVR32 Performance Counter Driver
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Authors: Sondre Garsjoe, Ronny Pedersen
++ */
++
++#define DEBUG
++
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/oprofile.h>
++#include <linux/interrupt.h>
++#include <asm/intc.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/sysreg.h>
++
++#include "op_counter.h"
++#include "op_avr32_model.h"
++
++
++#define PC_ENABLE 0x001 /* Enable counters */
++#define PCNT_RESET 0x002 /* Reset event counters */
++#define CCNT_RESET 0x004 /* Reset clock counter */
++#define PC_RESET (CCNT_RESET | PCNT_RESET)
++#define PC_CNT64 0x008 /* Make CCNT count every 64th cycle */
++
++
++#define EVT_UNUSED 0xFF
++
++struct pc_counter {
++ volatile unsigned long ovf;
++ unsigned long reset_counter;
++};
++
++enum { PCCNT, PCNT0, PCNT1, MAX_COUNTERS };
++
++#define PCCNT_IE (1 << 4)
++#define PCNT0_IE (1 << 5)
++#define PCNT1_IE (1 << 6)
++
++#define PCCNT_F (1 << 8)
++#define PCNT0_F (1 << 9)
++#define PCNT1_F (1 << 10)
++
++#define AVR32_PC_IRQ 0
++
++static const u32 int_mask[MAX_COUNTERS] = { PCCNT_IE, PCNT0_IE, PCNT1_IE };
++static const u32 ovf_mask[MAX_COUNTERS] = { PCCNT_F, PCNT0_F, PCNT1_F };
++
++static struct pc_counter results[MAX_COUNTERS];
++
++static void write_pccr(u32 val)
++{
++ sysreg_write(PCCR, val);
++}
++
++static u32 read_pccr(void)
++{
++ return sysreg_read(PCCR);
++}
++
++static u32 read_counter(int counter)
++{
++ switch (counter) {
++ case PCCNT:
++ return sysreg_read(PCCNT);
++ case PCNT0:
++ return sysreg_read(PCNT0);
++ case PCNT1:
++ return sysreg_read(PCNT1);
++ default:
++ return 0;
++ }
++}
++
++static void write_counter(int counter, u32 val)
++{
++ switch (counter) {
++ case PCCNT:
++ sysreg_write(PCCNT, val);
++ case PCNT0:
++ sysreg_write(PCNT0, val);
++ case PCNT1:
++ sysreg_write(PCNT1, val);
++ default:
++ break;
++ }
++}
++
++static int avr32_setup_ctrs(void)
++{
++ u32 pccr;
++ int i;
++
++ for (i = PCCNT; i < MAX_COUNTERS; i++) {
++ if (counter_config[i].enabled)
++ continue;
++
++ counter_config[i].event = EVT_UNUSED;
++ }
++
++ pccr = ((counter_config[PCNT1].event << 18)
++ | (counter_config[PCNT0].event << 12));
++ pr_debug("avr32_setup_ctrs: pccr: %#08x\n", pccr);
++ write_pccr(pccr);
++
++ for (i = PCCNT; i < MAX_COUNTERS; i++) {
++ if (counter_config[i].event == EVT_UNUSED) {
++ counter_config[i].event = 0;
++ continue;
++ }
++
++ results[i].reset_counter = counter_config[i].count;
++ write_counter(i, -(u32)counter_config[i].count);
++ pr_debug("avr32_setup_ctrs: counter%d %#08x from %#08lx\n",
++ i, read_counter(i), counter_config[i].count);
++ }
++
++ return 0;
++}
++
++static void inline check_ctrs(void)
++{
++ int i;
++ u32 pccr = read_pccr();
++
++ /* Writeback clears overflow flag */
++ write_pccr(pccr & ~PC_ENABLE);
++
++ for (i = PCCNT; i < MAX_COUNTERS; i++) {
++ if (!(int_mask[i] & pccr))
++ continue;
++
++ if (pccr & ovf_mask[i])
++ results[i].ovf++;
++ }
++}
++
++static irqreturn_t avr32_pc_interrupt(int irq, void *arg,
++ struct pt_regs *regs)
++{
++ int i;
++
++ /* Check if this is a performance counter interrupt */
++ if (!(intc_get_pending(irq) & 2))
++ return IRQ_NONE;
++
++ check_ctrs();
++
++ for (i = PCCNT; i < MAX_COUNTERS; i++) {
++ if (!results[i].ovf)
++ continue;
++
++ write_counter(i, -(u32)results[i].reset_counter);
++ oprofile_add_sample(regs, i);
++ results[i].ovf--;
++ }
++
++ /* Enable Performance Counter */
++ write_pccr(read_pccr() | PC_ENABLE);
++
++ return IRQ_HANDLED;
++}
++
++static void avr32_pc_stop(void)
++{
++ write_pccr(read_pccr() & ~PC_ENABLE);
++
++ free_irq(AVR32_PC_IRQ, results);
++}
++
++static int avr32_pc_start(void)
++{
++ int i, ret;
++ u32 pccr = read_pccr();
++
++ ret = request_irq(AVR32_PC_IRQ, avr32_pc_interrupt, IRQF_SHARED | IRQF_DISABLED,
++ "AVR32 Performance Counter", (void *)results);
++
++ if (ret < 0) {
++ printk(KERN_ERR
++ "oprofile: unable to request IRQ%d for AVR32"
++ " Performance Counter\n",
++ AVR32_PC_IRQ);
++ return ret;
++ }
++
++ /* Enable interrupts */
++ for (i = PCCNT; i < MAX_COUNTERS; i++) {
++ if (counter_config[i].enabled)
++ pccr |= int_mask[i];
++ }
++
++ /* Disable scaler */
++ pccr &= ~PC_CNT64;
++
++ /* Enable Performance Counter */
++ pccr |= PC_ENABLE;
++
++ write_pccr(pccr);
++ pr_debug("avr32_pc_start: pc: %#08x\n", pccr);
++ return 0;
++}
++
++
++struct op_avr32_model_spec op_avr32_spec = {
++ .init = 0,
++ .setup_ctrs = avr32_setup_ctrs,
++ .start = avr32_pc_start,
++ .stop = avr32_pc_stop,
++ .num_counters = MAX_COUNTERS,
++ .name = "avr32/at32ap7000",
++};
++
+diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.h
+--- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,21 @@
++/**
++ * AVR32 Machine Specific Operations
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++#ifndef OP_MODEL_AVR32_H
++#define OP_MODEL_AVR32_H
++
++extern struct op_avr32_model_spec op_avr32_spec;
++extern int pc_init(struct oprofile_operations *ops,
++ struct op_avr32_model_spec *spec);
++extern void pc_exit(void);
++
++
++#endif
+diff -urN linux-2.6.20.4-0rig/drivers/char/at91_spi.c linux-2.6.20.4-atmel/drivers/char/at91_spi.c
+--- linux-2.6.20.4-0rig/drivers/char/at91_spi.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/char/at91_spi.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,336 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
++ *
++ * Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pdc.h>
++#include <asm/io.h>
++#include <asm/semaphore.h>
++
++#include <asm/arch/at91_spi.h>
++#include <asm/arch/board.h>
++#include <asm/arch/spi.h>
++
++#undef DEBUG_SPI
++
++static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
++static int spi_enabled = 0;
++static struct semaphore spi_lock; /* protect access to SPI bus */
++static int current_device = -1; /* currently selected SPI device */
++static struct clk *spi_clk; /* SPI clock */
++static void __iomem *spi_base; /* SPI peripheral base-address */
++
++DECLARE_COMPLETION(transfer_complete);
++
++
++#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
++#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
++
++
++/* ......................................................................... */
++
++/*
++ * Access and enable the SPI bus.
++ * This MUST be called before any transfers are performed.
++ */
++void spi_access_bus(short device)
++{
++ /* Ensure that requested device is valid */
++ if ((device < 0) || (device >= NR_SPI_DEVICES))
++ panic("at91_spi: spi_access_bus called with invalid device");
++
++ if (spi_enabled == 0) {
++ clk_enable(spi_clk); /* Enable Peripheral clock */
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
++#ifdef DEBUG_SPI
++ printk("SPI on\n");
++#endif
++ }
++ spi_enabled++;
++
++ /* Lock the SPI bus */
++ down(&spi_lock);
++ current_device = device;
++
++ /* Configure SPI bus for device */
++ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
++}
++
++/*
++ * Relinquish control of the SPI bus.
++ */
++void spi_release_bus(short device)
++{
++ if (device != current_device)
++ panic("at91_spi: spi_release called with invalid device");
++
++ /* Release the SPI bus */
++ current_device = -1;
++ up(&spi_lock);
++
++ spi_enabled--;
++ if (spi_enabled == 0) {
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
++ clk_disable(spi_clk); /* Disable Peripheral clock */
++#ifdef DEBUG_SPI
++ printk("SPI off\n");
++#endif
++ }
++}
++
++/*
++ * Perform a data transfer over the SPI bus
++ */
++int spi_transfer(struct spi_transfer_list* list)
++{
++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++ int tx_size;
++
++ if (!list)
++ panic("at91_spi: spi_transfer called with NULL transfer list");
++ if (current_device == -1)
++ panic("at91_spi: spi_transfer called without acquiring bus");
++
++#ifdef DEBUG_SPI
++ printk("SPI transfer start [%i]\n", list->nr_transfers);
++#endif
++
++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++ /* Store transfer list */
++ device->xfers = list;
++ list->curr = 0;
++
++ /* Assume there must be at least one transfer */
++ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
++ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
++
++ /* Program PDC registers */
++ at91_spi_write(ATMEL_PDC_TPR, device->tx);
++ at91_spi_write(ATMEL_PDC_RPR, device->rx);
++ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
++ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
++
++ /* Is there a second transfer? */
++ if (list->nr_transfers > 1) {
++ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
++ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
++
++ /* Program Next PDC registers */
++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
++ }
++ else {
++ device->txnext = 0;
++ device->rxnext = 0;
++ at91_spi_write(ATMEL_PDC_TNCR, 0);
++ at91_spi_write(ATMEL_PDC_RNCR, 0);
++ }
++
++ // TODO: If we are doing consecutive transfers (at high speed, or
++ // small buffers), then it might be worth modifying the 'Delay between
++ // Consecutive Transfers' in the CSR registers.
++ // This is an issue if we cannot chain the next buffer fast enough
++ // in the interrupt handler.
++
++ /* Enable transmitter and receiver */
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
++
++ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
++ wait_for_completion(&transfer_complete);
++
++#ifdef DEBUG_SPI
++ printk("SPI transfer end\n");
++#endif
++
++ return 0;
++}
++
++/* ......................................................................... */
++
++/*
++ * Handle interrupts from the SPI controller.
++ */
++static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
++{
++ unsigned int status;
++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++ struct spi_transfer_list *list = device->xfers;
++
++#ifdef DEBUG_SPI
++ printk("SPI interrupt %i\n", current_device);
++#endif
++
++ if (!list)
++ panic("at91_spi: spi_interrupt with a NULL transfer list");
++
++ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
++
++ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
++ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
++
++ device->tx = device->txnext; /* move next transfer to current transfer */
++ device->rx = device->rxnext;
++
++ list->curr = list->curr + 1;
++ if (list->curr == list->nr_transfers) { /* all transfers complete */
++ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
++
++ /* Disable transmitter and receiver */
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ device->xfers = NULL;
++ complete(&transfer_complete);
++ }
++ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
++ device->txnext = 0;
++ device->rxnext = 0;
++ at91_spi_write(ATMEL_PDC_TNCR, 0);
++ at91_spi_write(ATMEL_PDC_RNCR, 0);
++ }
++ else {
++ int i = (list->curr)+1;
++
++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
++ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
++ }
++ return IRQ_HANDLED;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize the SPI controller
++ */
++static int __init at91spi_probe(struct platform_device *pdev)
++{
++ int i;
++ unsigned long scbr;
++ struct resource *res;
++
++ init_MUTEX(&spi_lock);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENXIO;
++
++ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
++ return -EBUSY;
++
++ spi_base = ioremap(res->start, res->end - res->start + 1);
++ if (!spi_base) {
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -ENOMEM;
++ }
++
++ spi_clk = clk_get(NULL, "spi_clk");
++ if (IS_ERR(spi_clk)) {
++ printk(KERN_ERR "at91_spi: no clock defined\n");
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -ENODEV;
++ }
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
++
++ /*
++ * Calculate the correct SPI baud-rate divisor.
++ */
++ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
++ scbr = scbr + 1; /* round up */
++
++ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
++
++ /* Set Chip Select registers to good defaults */
++ for (i = 0; i < 4; i++) {
++ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
++ }
++
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ memset(&spi_dev, 0, sizeof(spi_dev));
++ spi_dev[0].pcs = 0xE;
++ spi_dev[1].pcs = 0xD;
++ spi_dev[2].pcs = 0xB;
++ spi_dev[3].pcs = 0x7;
++
++ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
++ clk_put(spi_clk);
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -EBUSY;
++ }
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
++
++ return 0;
++}
++
++static int __devexit at91spi_remove(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
++ clk_put(spi_clk);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++
++ free_irq(AT91RM9200_ID_SPI, 0);
++ return 0;
++}
++
++static struct platform_driver at91spi_driver = {
++ .probe = at91spi_probe,
++ .remove = __devexit_p(at91spi_remove),
++ .driver = {
++ .name = "at91_spi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91spi_init(void)
++{
++ return platform_driver_register(&at91spi_driver);
++}
++
++static void __exit at91spi_exit(void)
++{
++ platform_driver_unregister(&at91spi_driver);
++}
++
++EXPORT_SYMBOL(spi_access_bus);
++EXPORT_SYMBOL(spi_release_bus);
++EXPORT_SYMBOL(spi_transfer);
++
++module_init(at91spi_init);
++module_exit(at91spi_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+diff -urN linux-2.6.20.4-0rig/drivers/char/at91_spidev.c linux-2.6.20.4-atmel/drivers/char/at91_spidev.c
+--- linux-2.6.20.4-0rig/drivers/char/at91_spidev.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/char/at91_spidev.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,236 @@
++/*
++ * User-space interface to the SPI bus on Atmel AT91RM9200
++ *
++ * Copyright (C) 2003 SAN People (Pty) Ltd
++ *
++ * Based on SPI driver by Rick Bronson
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <asm/arch/spi.h>
++
++#ifdef CONFIG_DEVFS_FS
++#include <linux/devfs_fs_kernel.h>
++#endif
++
++
++#undef DEBUG_SPIDEV
++
++/* ......................................................................... */
++
++/*
++ * Read or Write to SPI bus.
++ */
++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
++{
++ unsigned int spi_device = (unsigned int) file->private_data;
++
++ struct mm_struct * mm;
++ struct page ** maplist;
++ struct spi_transfer_list* list;
++ int pgcount;
++
++ unsigned int ofs, pagelen;
++ int res, i, err;
++
++ if (!count) {
++ return 0;
++ }
++
++ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++ if (!list) {
++ return -ENOMEM;
++ }
++
++ mm = current->mm;
++
++ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
++
++ if (pgcount >= MAX_SPI_TRANSFERS) {
++ kfree(list);
++ return -EFBIG;
++ }
++
++ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
++
++ if (!maplist) {
++ kfree(list);
++ return -ENOMEM;
++ }
++ flush_cache_all();
++ down_read(&mm->mmap_sem);
++ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
++ up_read(&mm->mmap_sem);
++
++ if (err < 0) {
++ kfree(list);
++ kfree(maplist);
++ return err;
++ }
++ pgcount = err;
++
++#ifdef DEBUG_SPIDEV
++ printk("spidev_rd_rw: %i %i\n", count, pgcount);
++#endif
++
++ /* Set default return value = transfer length */
++ res = count;
++
++ /*
++ * At this point, the virtual area buf[0] .. buf[count-1] will have
++ * corresponding pages mapped in the physical memory and locked until
++ * we unmap the kiobuf. The pages cannot be swapped out or moved
++ * around.
++ */
++ ofs = (unsigned long) buf & (PAGE_SIZE -1);
++ pagelen = PAGE_SIZE - ofs;
++ if (count < pagelen)
++ pagelen = count;
++
++ for (i = 0; i < pgcount; i++) {
++ flush_dcache_page(maplist[i]);
++
++ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
++ list->txlen[i] = list->rxlen[i] = pagelen;
++
++#ifdef DEBUG_SPIDEV
++ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
++#endif
++
++ ofs = 0; /* all subsequent transfers start at beginning of a page */
++ count = count - pagelen;
++ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
++ }
++ list->nr_transfers = pgcount;
++
++ /* Perform transfer on SPI bus */
++ spi_access_bus(spi_device);
++ spi_transfer(list);
++ spi_release_bus(spi_device);
++
++ while (pgcount--) {
++ page_cache_release (maplist[pgcount]);
++ }
++ flush_cache_all();
++
++ kfree(maplist);
++ kfree(list);
++
++ return res;
++}
++
++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int spi_device = MINOR(inode->i_rdev);
++
++ if (spi_device >= NR_SPI_DEVICES)
++ return -ENODEV;
++
++ // TODO: This interface can be used to configure the SPI bus.
++ // Configurable options could include: Speed, Clock Polarity, Clock Phase
++
++ switch(cmd) {
++ default:
++ return -ENOIOCTLCMD;
++ }
++}
++
++/*
++ * Open the SPI device
++ */
++static int spidev_open(struct inode *inode, struct file *file)
++{
++ unsigned int spi_device = MINOR(inode->i_rdev);
++
++ if (spi_device >= NR_SPI_DEVICES)
++ return -ENODEV;
++
++ /*
++ * 'private_data' is actually a pointer, but we overload it with the
++ * value we want to store.
++ */
++ file->private_data = (void *)spi_device;
++
++ return 0;
++}
++
++/*
++ * Close the SPI device
++ */
++static int spidev_close(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++/* ......................................................................... */
++
++static struct file_operations spidev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .read = spidev_rd_wr,
++ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
++ .ioctl = spidev_ioctl,
++ .open = spidev_open,
++ .release = spidev_close,
++};
++
++/*
++ * Install the SPI /dev interface driver
++ */
++static int __init at91_spidev_init(void)
++{
++#ifdef CONFIG_DEVFS_FS
++ int i;
++#endif
++
++ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
++ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
++ return -EIO;
++ }
++
++#ifdef CONFIG_DEVFS_FS
++ devfs_mk_dir("spi");
++ for (i = 0; i < NR_SPI_DEVICES; i++) {
++ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
++ }
++#endif
++ printk(KERN_INFO "AT91 SPI driver loaded\n");
++
++ return 0;
++}
++
++/*
++ * Remove the SPI /dev interface driver
++ */
++static void __exit at91_spidev_exit(void)
++{
++#ifdef CONFIG_DEVFS_FS
++ int i;
++ for (i = 0; i < NR_SPI_DEVICES; i++) {
++ devfs_remove("spi/%d", i);
++ }
++
++ devfs_remove("spi");
++#endif
++
++ if (unregister_chrdev(SPI_MAJOR, "spi")) {
++ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
++ return;
++ }
++}
++
++module_init(at91_spidev_init);
++module_exit(at91_spidev_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
+diff -urN linux-2.6.20.4-0rig/drivers/char/Kconfig linux-2.6.20.4-atmel/drivers/char/Kconfig
+--- linux-2.6.20.4-0rig/drivers/char/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/char/Kconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -1030,5 +1030,21 @@
+ sysfs directory, /sys/devices/platform/telco_clock, with a number of
+ files for controlling the behavior of this hardware.
+
++config AT91_SPI
++ bool "SPI driver (legacy) for AT91RM9200 processors"
++ depends on ARCH_AT91RM9200
++ default y
++ help
++ The SPI driver gives access to this serial bus on the AT91RM9200
++ processor.
++
++config AT91_SPIDEV
++ bool "SPI device interface (legacy) for AT91RM9200 processors"
++ depends on ARCH_AT91RM9200 && AT91_SPI
++ default n
++ help
++ The SPI driver gives user mode access to this serial
++ bus on the AT91RM9200 processor.
++
+ endmenu
+
+diff -urN linux-2.6.20.4-0rig/drivers/char/Makefile linux-2.6.20.4-atmel/drivers/char/Makefile
+--- linux-2.6.20.4-0rig/drivers/char/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/char/Makefile 2007-03-24 16:39:15.000000000 +0100
+@@ -90,6 +90,8 @@
+ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+ obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+ obj-$(CONFIG_TELCLOCK) += tlclk.o
++obj-$(CONFIG_AT91_SPI) += at91_spi.o
++obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
+
+ obj-$(CONFIG_WATCHDOG) += watchdog/
+ obj-$(CONFIG_MWAVE) += mwave/
+diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/atmeltwi.h linux-2.6.20.4-atmel/drivers/i2c/busses/atmeltwi.h
+--- linux-2.6.20.4-0rig/drivers/i2c/busses/atmeltwi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/i2c/busses/atmeltwi.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ASM_AVR32_TWI_H__
++#define __ASM_AVR32_TWI_H__
++
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name,value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name,value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name,value,old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name,value))
++
++/* Register access macros */
++#define twi_readl(port,reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ASM_AVR32_TWI_H__ */
+diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-at91.c linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-at91.c
+--- linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-at91.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-at91.c 2007-03-24 16:39:15.000000000 +0100
+@@ -31,8 +31,11 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+
+-#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
+
++/* Clockrate is configurable - max 400 Kbits/sec */
++static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
++module_param(clockrate, uint, 0);
++MODULE_PARM_DESC(clockrate, "The TWI clockrate");
+
+ static struct clk *twi_clk;
+ static void __iomem *twi_base;
+@@ -53,7 +56,7 @@
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
+
+ /* Calcuate clock dividers */
+- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
++ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
+ cdiv = cdiv + 1; /* round up */
+ ckdiv = 0;
+ while (cdiv > 255) {
+@@ -63,9 +66,14 @@
+
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
+ if (ckdiv > 5) {
+- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
+ ckdiv = 5;
+ }
++ } else {
++ if (ckdiv > 7) {
++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++ ckdiv = 7;
++ }
+ }
+
+ at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
+diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-atmeltwi.c linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-atmeltwi.c
+--- linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-atmeltwi.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-atmeltwi.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,348 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <asm/io.h>
++#include <linux/time.h>
++#include "atmeltwi.h"
++
++static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ spinlock_t lock;
++ struct completion comp;
++ u32 intmask;
++ u8 *buf;
++ u8 len;
++ u8 acks_left;
++ unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * Initialize the TWI hardware registers.
++ */
++static int __devinit twi_hwinit(struct atmel_twi *twi)
++{
++ unsigned long cdiv, ckdiv=0;
++
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
++
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
++ }
++
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv)));
++ return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out (~100ms).
++ */
++static short twi_wait_for_completion(struct atmel_twi *twi,
++ u32 mask)
++{
++ int timeout = msecs_to_jiffies(100);
++
++ twi->intmask = mask;
++ init_completion(&twi->comp);
++
++ twi_writel(twi, IER, mask);
++
++ if(!wait_for_completion_timeout(&twi->comp, timeout))
++ return -ETIMEDOUT;
++
++ return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
++{
++ struct atmel_twi *twi = to_atmel_twi(adap);
++ struct i2c_msg *pmsg;
++ int i;
++
++ /* get first message */
++ pmsg = msgs;
++
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++ for (i = 0; i < num; i++, pmsg++) {
++
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
++ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
++
++ if (pmsg->flags & I2C_M_RD) {
++ twi_writel(twi, CR, TWI_BIT(START));
++ if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) {
++ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
++ twi->acks_left);
++ return -ETIMEDOUT;
++ }
++
++ /* Send Stop, and Wait until transfer is finished */
++ if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) {
++ dev_dbg(&adap->dev, "TXCOMP timeout\n");
++ return -ETIMEDOUT;
++ }
++
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) {
++ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
++ twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ }
++
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++ } /* end cur msg */
++
++ return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
++
++ if (twi->intmask & status){
++ if (twi->intmask & TWI_BIT(NACK)) {
++ goto nack;
++ } else if (twi->intmask & TWI_BIT(RXRDY)){
++ twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR);
++ if(--twi->acks_left==1)
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ if (twi->acks_left==0)
++ goto complete;
++ } else if (twi->intmask & TWI_BIT(TXRDY)) {
++ twi->acks_left--;
++ if (twi->acks_left==0) {
++ twi->intmask = TWI_BIT(TXCOMP);
++ twi_writel(twi, IER, TWI_BIT(TXCOMP));
++ } else
++ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
++ } else if (twi->intmask & TWI_BIT(TXCOMP)) {
++ goto complete;
++ }
++ }
++
++ return IRQ_HANDLED;
++
++nack:
++ printk(KERN_INFO "NACK received!\n");
++
++complete:
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
++
++ return IRQ_HANDLED;
++
++}
++
++
++/*
++ * Return list of supported functionality.
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++/* For now, we only handle combined mode (smbus) */
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __devinit twi_probe(struct platform_device *pdev)
++{
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
++
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_err(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
++
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
++
++ irq = platform_get_irq(pdev,0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_err(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
++
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
++ }
++
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_HWMON;
++ adapter->dev.parent = &pdev->dev;
++
++ platform_set_drvdata(pdev, twi);
++
++ rc = i2c_add_adapter(adapter);
++ if (rc) {
++ dev_err(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
++ }
++
++ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
++
++ return 0;
++
++
++err_register:
++ platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++ free_irq(irq, twi);
++
++err_irq:
++ iounmap(twi->regs);
++
++err_ioremap:
++ kfree(twi);
++
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
++
++ return rc;
++}
++
++static int __devexit twi_remove(struct platform_device *pdev)
++{
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
++
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
++
++ return res;
++}
++
++static struct platform_driver twi_driver = {
++ .probe = twi_probe,
++ .remove = __devexit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_twi_init(void)
++{
++ return platform_driver_register(&twi_driver);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++ platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/Kconfig linux-2.6.20.4-atmel/drivers/i2c/busses/Kconfig
+--- linux-2.6.20.4-0rig/drivers/i2c/busses/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/i2c/busses/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -5,6 +5,26 @@
+ menu "I2C Hardware Bus support"
+ depends on I2C
+
++config I2C_ATMELTWI
++ tristate "Atmel TWI/I2C"
++ depends on I2C
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality. Atmel's TWI is compatible with Philips' I2C
++ protocol. If in doubt, say NO
++
++config I2C_ATMELTWI_BAUDRATE
++ prompt "Atmel TWI baudrate"
++ depends on I2C_ATMELTWI
++ int
++ default 100000
++ help
++ Set the TWI/I2C baudrate. This will alter the default value. A
++ different baudrate can be set by using a module parameter as well. If
++ no parameter is provided when loading, this is the value that will be
++ used.
++
+ config I2C_ALI1535
+ tristate "ALI 1535"
+ depends on I2C && PCI
+@@ -81,6 +101,14 @@
+ This supports the use of the I2C interface on Atmel AT91
+ processors.
+
++config I2C_AT91_CLOCKRATE
++ prompt "Atmel AT91 I2C/TWI clock-rate"
++ depends on I2C_AT91
++ int
++ default 100000
++ help
++ Set the AT91 I2C/TWI clock-rate.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on I2C && (SOC_AU1550 || SOC_AU1200)
+diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/Makefile linux-2.6.20.4-atmel/drivers/i2c/busses/Makefile
+--- linux-2.6.20.4-0rig/drivers/i2c/busses/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/i2c/busses/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -46,6 +46,7 @@
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -urN linux-2.6.20.4-0rig/drivers/input/touchscreen/ads7846.c linux-2.6.20.4-atmel/drivers/input/touchscreen/ads7846.c
+--- linux-2.6.20.4-0rig/drivers/input/touchscreen/ads7846.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/input/touchscreen/ads7846.c 2007-03-24 16:39:15.000000000 +0100
+@@ -17,8 +17,9 @@
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+-#include <linux/device.h>
++#include <linux/hwmon.h>
+ #include <linux/init.h>
++#include <linux/err.h>
+ #include <linux/delay.h>
+ #include <linux/input.h>
+ #include <linux/interrupt.h>
+@@ -38,7 +39,8 @@
+ /*
+ * This code has been heavily tested on a Nokia 770, and lightly
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock).
+- * Support for ads7843 and ads7845 has only been stubbed in.
++ * Support for ads7843 tested on Atmel at91sam926x-EK.
++ * Support for ads7845 has only been stubbed in.
+ *
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+@@ -54,7 +56,8 @@
+ * files.
+ */
+
+-#define TS_POLL_PERIOD msecs_to_jiffies(10)
++#define TS_POLL_DELAY (1 * 1000000) /* ns delay before the first sample */
++#define TS_POLL_PERIOD (5 * 1000000) /* ns delay between samples */
+
+ /* this driver doesn't aim at the peak continuous sample rate */
+ #define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
+@@ -63,12 +66,12 @@
+ /* For portability, we can't read 12 bit values using SPI (which
+ * would make the controller deliver them as native byteorder u16
+ * with msbs zeroed). Instead, we read them as two 8-bit values,
+- * which need byteswapping then range adjustment.
++ * *** WHICH NEED BYTESWAPPING *** and range adjustment.
+ */
+- __be16 x;
+- __be16 y;
+- __be16 z1, z2;
+- int ignore;
++ u16 x;
++ u16 y;
++ u16 z1, z2;
++ int ignore;
+ };
+
+ struct ads7846 {
+@@ -76,7 +79,12 @@
+ char phys[32];
+
+ struct spi_device *spi;
++
++#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
+ struct attribute_group *attr_group;
++ struct class_device *hwmon;
++#endif
++
+ u16 model;
+ u16 vref_delay_usecs;
+ u16 x_plate_ohms;
+@@ -99,13 +107,16 @@
+ u16 debounce_rep;
+
+ spinlock_t lock;
+- struct timer_list timer; /* P: lock */
++ struct hrtimer timer;
+ unsigned pendown:1; /* P: lock */
+ unsigned pending:1; /* P: lock */
+ // FIXME remove "irq_disabled"
+ unsigned irq_disabled:1; /* P: lock */
+ unsigned disabled:1;
+
++ int (*filter)(void *data, int data_idx, int *val);
++ void *filter_data;
++ void (*filter_cleanup)(void *data);
+ int (*get_pendown_state)(void);
+ };
+
+@@ -142,15 +153,16 @@
+ #define MAX_12BIT ((1<<12)-1)
+
+ /* leave ADC powered up (disables penirq) between differential samples */
+-#define READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \
+- | ADS_12_BIT | ADS_DFR)
+-
+-#define READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ADC_ON)
+-#define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
+-#define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
++#define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
++ | ADS_12_BIT | ADS_DFR | \
++ (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
++
++#define READ_Y(vref) (READ_12BIT_DFR(y, 1, vref))
++#define READ_Z1(vref) (READ_12BIT_DFR(z1, 1, vref))
++#define READ_Z2(vref) (READ_12BIT_DFR(z2, 1, vref))
+
+-#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_ADC_ON)
+-#define PWRDOWN (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) /* LAST */
++#define READ_X(vref) (READ_12BIT_DFR(x, 1, vref))
++#define PWRDOWN (READ_12BIT_DFR(y, 0, 0)) /* LAST */
+
+ /* single-ended samples need to first power up reference voltage;
+ * we leave both ADC and VREF powered
+@@ -158,14 +170,19 @@
+ #define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
+ | ADS_12_BIT | ADS_SER)
+
+-#define REF_ON (READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
+-#define REF_OFF (READ_12BIT_DFR(y) | ADS_PD10_PDOWN)
++#define REF_ON (READ_12BIT_DFR(x, 1, 1))
++#define REF_OFF (READ_12BIT_DFR(y, 0, 0))
+
+ /*--------------------------------------------------------------------------*/
+
+ /*
+ * Non-touchscreen sensors only use single-ended conversions.
++ * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
++ * ads7846 lets that pin be unconnected, to use internal vREF.
+ */
++static unsigned vREF_mV;
++module_param(vREF_mV, uint, 0);
++MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts");
+
+ struct ser_req {
+ u8 ref_on;
+@@ -193,50 +210,53 @@
+ struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL);
+ int status;
+ int sample;
+- int i;
++ int use_internal;
+
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+- /* activate reference, so it has time to settle; */
+- req->ref_on = REF_ON;
+- req->xfer[0].tx_buf = &req->ref_on;
+- req->xfer[0].len = 1;
+- req->xfer[1].rx_buf = &req->scratch;
+- req->xfer[1].len = 2;
+-
+- /*
+- * for external VREF, 0 usec (and assume it's always on);
+- * for 1uF, use 800 usec;
+- * no cap, 100 usec.
+- */
+- req->xfer[1].delay_usecs = ts->vref_delay_usecs;
++ /* FIXME boards with ads7846 might use external vref instead ... */
++ use_internal = (ts->model == 7846);
++
++ /* maybe turn on internal vREF, and let it settle */
++ if (use_internal) {
++ req->ref_on = REF_ON;
++ req->xfer[0].tx_buf = &req->ref_on;
++ req->xfer[0].len = 1;
++ spi_message_add_tail(&req->xfer[0], &req->msg);
++
++ req->xfer[1].rx_buf = &req->scratch;
++ req->xfer[1].len = 2;
++
++ /* for 1uF, settle for 800 usec; no cap, 100 usec. */
++ req->xfer[1].delay_usecs = ts->vref_delay_usecs;
++ spi_message_add_tail(&req->xfer[1], &req->msg);
++ }
+
+ /* take sample */
+ req->command = (u8) command;
+ req->xfer[2].tx_buf = &req->command;
+ req->xfer[2].len = 1;
++ spi_message_add_tail(&req->xfer[2], &req->msg);
++
+ req->xfer[3].rx_buf = &req->sample;
+ req->xfer[3].len = 2;
++ spi_message_add_tail(&req->xfer[3], &req->msg);
+
+ /* REVISIT: take a few more samples, and compare ... */
+
+- /* turn off reference */
+- req->ref_off = REF_OFF;
++ /* converter in low power mode & enable PENIRQ */
++ req->ref_off = PWRDOWN;
+ req->xfer[4].tx_buf = &req->ref_off;
+ req->xfer[4].len = 1;
++ spi_message_add_tail(&req->xfer[4], &req->msg);
++
+ req->xfer[5].rx_buf = &req->scratch;
+ req->xfer[5].len = 2;
+-
+ CS_CHANGE(req->xfer[5]);
+-
+- /* group all the transfers together, so we can't interfere with
+- * reading touchscreen state; disable penirq while sampling
+- */
+- for (i = 0; i < 6; i++)
+- spi_message_add_tail(&req->xfer[i], &req->msg);
++ spi_message_add_tail(&req->xfer[5], &req->msg);
+
+ ts->irq_disabled = 1;
+ disable_irq(spi->irq);
+@@ -256,25 +276,173 @@
+ return status ? status : sample;
+ }
+
+-#define SHOW(name) static ssize_t \
++#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
++
++#define SHOW(name, var, adjust) static ssize_t \
+ name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
+ { \
++ struct ads7846 *ts = dev_get_drvdata(dev); \
+ ssize_t v = ads7846_read12_ser(dev, \
+- READ_12BIT_SER(name) | ADS_PD10_ALL_ON); \
++ READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \
+ if (v < 0) \
+ return v; \
+- return sprintf(buf, "%u\n", (unsigned) v); \
++ return sprintf(buf, "%u\n", adjust(ts, v)); \
+ } \
+ static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
+
+-SHOW(temp0)
+-SHOW(temp1)
+-SHOW(vaux)
+-SHOW(vbatt)
++
++/* Sysfs conventions report temperatures in millidegrees Celcius.
++ * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
++ * accuracy scheme without calibration data. For now we won't try either;
++ * userspace sees raw sensor values, and must scale/calibrate appropriately.
++ */
++static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
++{
++ return v;
++}
++
++SHOW(temp0, temp0, null_adjust) /* temp1_input */
++SHOW(temp1, temp1, null_adjust) /* temp2_input */
++
++
++/* sysfs conventions report voltages in millivolts. We can convert voltages
++ * if we know vREF. userspace may need to scale vAUX to match the board's
++ * external resistors; we assume that vBATT only uses the internal ones.
++ */
++static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
++{
++ unsigned retval = v;
++
++ /* external resistors may scale vAUX into 0..vREF */
++ retval *= vREF_mV;
++ retval = retval >> 12;
++ return retval;
++}
++
++static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
++{
++ unsigned retval = vaux_adjust(ts, v);
++
++ /* ads7846 has a resistor ladder to scale this signal down */
++ if (ts->model == 7846)
++ retval *= 4;
++ return retval;
++}
++
++SHOW(in0_input, vaux, vaux_adjust)
++SHOW(in1_input, vbatt, vbatt_adjust)
++
++
++static struct attribute *ads7846_attributes[] = {
++ &dev_attr_temp0.attr,
++ &dev_attr_temp1.attr,
++ &dev_attr_in0_input.attr,
++ &dev_attr_in1_input.attr,
++ NULL,
++};
++
++static struct attribute_group ads7846_attr_group = {
++ .attrs = ads7846_attributes,
++};
++
++static struct attribute *ads7843_attributes[] = {
++ &dev_attr_in0_input.attr,
++ &dev_attr_in1_input.attr,
++ NULL,
++};
++
++static struct attribute_group ads7843_attr_group = {
++ .attrs = ads7843_attributes,
++};
++
++static struct attribute *ads7845_attributes[] = {
++ &dev_attr_in0_input.attr,
++ NULL,
++};
++
++static struct attribute_group ads7845_attr_group = {
++ .attrs = ads7845_attributes,
++};
++
++static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
++{
++ struct class_device *hwmon;
++ int err;
++
++ /* hwmon sensors need a reference voltage */
++ switch (ts->model) {
++ case 7846:
++ if (!vREF_mV) {
++ dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
++ vREF_mV = 2500;
++ }
++ break;
++ case 7845:
++ case 7843:
++ if (!vREF_mV) {
++ dev_warn(&spi->dev,
++ "external vREF for ADS%d not specified\n",
++ ts->model);
++ return 0;
++ }
++ break;
++ }
++
++ /* different chips have different sensor groups */
++ switch (ts->model) {
++ case 7846:
++ ts->attr_group = &ads7846_attr_group;
++ break;
++ case 7845:
++ ts->attr_group = &ads7845_attr_group;
++ break;
++ case 7843:
++ ts->attr_group = &ads7843_attr_group;
++ break;
++ default:
++ dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model);
++ return 0;
++ }
++
++ err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
++ if (err)
++ return err;
++
++ hwmon = hwmon_device_register(&spi->dev);
++ if (IS_ERR(hwmon)) {
++ sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
++ return PTR_ERR(hwmon);
++ }
++
++ ts->hwmon = hwmon;
++ return 0;
++}
++
++static void ads784x_hwmon_unregister(struct spi_device *spi,
++ struct ads7846 *ts)
++{
++ if (ts->hwmon) {
++ sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
++ hwmon_device_unregister(ts->hwmon);
++ }
++}
++
++#else
++static inline int ads784x_hwmon_register(struct spi_device *spi,
++ struct ads7846 *ts)
++{
++ return 0;
++}
++
++static inline void ads784x_hwmon_unregister(struct spi_device *spi,
++ struct ads7846 *ts)
++{
++}
++#endif
+
+ static int is_pen_down(struct device *dev)
+ {
+- struct ads7846 *ts = dev_get_drvdata(dev);
++ struct ads7846 *ts = dev_get_drvdata(dev);
+
+ return ts->pendown;
+ }
+@@ -318,46 +486,14 @@
+
+ static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
+-static struct attribute *ads7846_attributes[] = {
+- &dev_attr_temp0.attr,
+- &dev_attr_temp1.attr,
+- &dev_attr_vbatt.attr,
+- &dev_attr_vaux.attr,
+- &dev_attr_pen_down.attr,
+- &dev_attr_disable.attr,
+- NULL,
+-};
+-
+-static struct attribute_group ads7846_attr_group = {
+- .attrs = ads7846_attributes,
+-};
+-
+-/*
+- * ads7843/7845 don't have temperature sensors, and
+- * use the other sensors a bit differently too
+- */
+-
+-static struct attribute *ads7843_attributes[] = {
+- &dev_attr_vbatt.attr,
+- &dev_attr_vaux.attr,
++static struct attribute *ads784x_attributes[] = {
+ &dev_attr_pen_down.attr,
+ &dev_attr_disable.attr,
+ NULL,
+ };
+
+-static struct attribute_group ads7843_attr_group = {
+- .attrs = ads7843_attributes,
+-};
+-
+-static struct attribute *ads7845_attributes[] = {
+- &dev_attr_vaux.attr,
+- &dev_attr_pen_down.attr,
+- &dev_attr_disable.attr,
+- NULL,
+-};
+-
+-static struct attribute_group ads7845_attr_group = {
+- .attrs = ads7845_attributes,
++static struct attribute_group ads784x_attr_group = {
++ .attrs = ads784x_attributes,
+ };
+
+ /*--------------------------------------------------------------------------*/
+@@ -373,25 +509,22 @@
+ static void ads7846_rx(void *ads)
+ {
+ struct ads7846 *ts = ads;
+- struct input_dev *input_dev = ts->input;
+ unsigned Rt;
+- unsigned sync = 0;
+ u16 x, y, z1, z2;
+- unsigned long flags;
+
+- /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
+- * built from two 8 bit values written msb-first.
++ /* ads7846_rx_val() did in-place conversion (including byteswap) from
++ * on-the-wire format as part of debouncing to get stable readings.
+ */
+- x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
+- y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
+- z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
+- z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
++ x = ts->tc.x;
++ y = ts->tc.y;
++ z1 = ts->tc.z1;
++ z2 = ts->tc.z2;
+
+ /* range filtering */
+ if (x == MAX_12BIT)
+ x = 0;
+
+- if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
++ if (likely(x && z1)) {
+ /* compute touch pressure resistance using equation #2 */
+ Rt = z2;
+ Rt -= z1;
+@@ -402,101 +535,134 @@
+ } else
+ Rt = 0;
+
++ if (ts->model == 7843)
++ Rt = ts->pressure_max / 2;
++
++
+ /* Sample found inconsistent by debouncing or pressure is beyond
+- * the maximum. Don't report it to user space, repeat at least
+- * once more the measurement */
++ * the maximum. Don't report it to user space, repeat at least
++ * once more the measurement
++ */
+ if (ts->tc.ignore || Rt > ts->pressure_max) {
+- mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
++#ifdef VERBOSE
++ pr_debug("%s: ignored %d pressure %d\n",
++ ts->spi->dev.bus_id, ts->tc.ignore, Rt);
++#endif
++ hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
++ HRTIMER_REL);
+ return;
+ }
+
+- /* NOTE: "pendown" is inferred from pressure; we don't rely on
+- * being able to check nPENIRQ status, or "friendly" trigger modes
+- * (both-edges is much better than just-falling or low-level).
+- *
+- * REVISIT: some boards may require reading nPENIRQ; it's
+- * needed on 7843. and 7845 reads pressure differently...
++ /* NOTE: We can't rely on the pressure to determine the pen down
++ * state, even this controller has a pressure sensor. The pressure
++ * value can fluctuate for quite a while after lifting the pen and
++ * in some cases may not even settle at the expected value.
+ *
+- * REVISIT: the touchscreen might not be connected; this code
+- * won't notice that, even if nPENIRQ never fires ...
++ * The only safe way to check for the pen up condition is in the
++ * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
+ */
+- if (!ts->pendown && Rt != 0) {
+- input_report_key(input_dev, BTN_TOUCH, 1);
+- sync = 1;
+- } else if (ts->pendown && Rt == 0) {
+- input_report_key(input_dev, BTN_TOUCH, 0);
+- sync = 1;
+- }
+-
+ if (Rt) {
+- input_report_abs(input_dev, ABS_X, x);
+- input_report_abs(input_dev, ABS_Y, y);
+- sync = 1;
+- }
++ struct input_dev *input = ts->input;
+
+- if (sync) {
+- input_report_abs(input_dev, ABS_PRESSURE, Rt);
+- input_sync(input_dev);
+- }
+-
+-#ifdef VERBOSE
+- if (Rt || ts->pendown)
+- pr_debug("%s: %d/%d/%d%s\n", ts->spi->dev.bus_id,
+- x, y, Rt, Rt ? "" : " UP");
++ if (!ts->pendown) {
++ input_report_key(input, BTN_TOUCH, 1);
++ ts->pendown = 1;
++#ifdef VERBOSE
++ dev_dbg(&ts->spi->dev, "DOWN\n");
+ #endif
++ }
++ input_report_abs(input, ABS_X, x);
++ input_report_abs(input, ABS_Y, y);
++ input_report_abs(input, ABS_PRESSURE, Rt);
++
++ input_sync(input);
++#ifdef VERBOSE
++ dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
++#endif
++ }
+
+- spin_lock_irqsave(&ts->lock, flags);
+-
+- ts->pendown = (Rt != 0);
+- mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+-
+- spin_unlock_irqrestore(&ts->lock, flags);
++ hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
+ }
+
+-static void ads7846_debounce(void *ads)
++static int ads7846_debounce(void *ads, int data_idx, int *val)
+ {
+ struct ads7846 *ts = ads;
+- struct spi_message *m;
+- struct spi_transfer *t;
+- int val;
+- int status;
+
+- m = &ts->msg[ts->msg_idx];
+- t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+- val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
+- if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
++ if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
++ /* Start over collecting consistent readings. */
++ ts->read_rep = 0;
+ /* Repeat it, if this was the first read or the read
+ * wasn't consistent enough. */
+ if (ts->read_cnt < ts->debounce_max) {
+- ts->last_read = val;
++ ts->last_read = *val;
+ ts->read_cnt++;
++ return ADS7846_FILTER_REPEAT;
+ } else {
+ /* Maximum number of debouncing reached and still
+ * not enough number of consistent readings. Abort
+ * the whole sample, repeat it in the next sampling
+ * period.
+ */
+- ts->tc.ignore = 1;
+ ts->read_cnt = 0;
+- /* Last message will contain ads7846_rx() as the
+- * completion function.
+- */
+- m = ts->last_msg;
++ return ADS7846_FILTER_IGNORE;
+ }
+- /* Start over collecting consistent readings. */
+- ts->read_rep = 0;
+ } else {
+ if (++ts->read_rep > ts->debounce_rep) {
+ /* Got a good reading for this coordinate,
+ * go for the next one. */
+- ts->tc.ignore = 0;
+- ts->msg_idx++;
+ ts->read_cnt = 0;
+ ts->read_rep = 0;
+- m++;
+- } else
++ return ADS7846_FILTER_OK;
++ } else {
+ /* Read more values that are consistent. */
+ ts->read_cnt++;
++ return ADS7846_FILTER_REPEAT;
++ }
++ }
++}
++
++static int ads7846_no_filter(void *ads, int data_idx, int *val)
++{
++ return ADS7846_FILTER_OK;
++}
++
++static void ads7846_rx_val(void *ads)
++{
++ struct ads7846 *ts = ads;
++ struct spi_message *m;
++ struct spi_transfer *t;
++ u16 *rx_val;
++ int val;
++ int action;
++ int status;
++
++ m = &ts->msg[ts->msg_idx];
++ t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
++ rx_val = t->rx_buf;
++
++ /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
++ * built from two 8 bit values written msb-first.
++ */
++ val = be16_to_cpu(*rx_val) >> 3;
++
++ action = ts->filter(ts->filter_data, ts->msg_idx, &val);
++ switch (action) {
++ case ADS7846_FILTER_REPEAT:
++ break;
++ case ADS7846_FILTER_IGNORE:
++ ts->tc.ignore = 1;
++ /* Last message will contain ads7846_rx() as the
++ * completion function.
++ */
++ m = ts->last_msg;
++ break;
++ case ADS7846_FILTER_OK:
++ *rx_val = val;
++ ts->tc.ignore = 0;
++ m = &ts->msg[++ts->msg_idx];
++ break;
++ default:
++ BUG();
+ }
+ status = spi_async(ts->spi, m);
+ if (status)
+@@ -504,21 +670,34 @@
+ status);
+ }
+
+-static void ads7846_timer(unsigned long handle)
++static int ads7846_timer(struct hrtimer *handle)
+ {
+- struct ads7846 *ts = (void *)handle;
++ struct ads7846 *ts = container_of(handle, struct ads7846, timer);
+ int status = 0;
+
+ spin_lock_irq(&ts->lock);
+
+- if (unlikely(ts->msg_idx && !ts->pendown)) {
++ if (unlikely(!ts->get_pendown_state() ||
++ device_suspended(&ts->spi->dev))) {
++ if (ts->pendown) {
++ struct input_dev *input = ts->input;
++
++ input_report_key(input, BTN_TOUCH, 0);
++ input_report_abs(input, ABS_PRESSURE, 0);
++ input_sync(input);
++
++ ts->pendown = 0;
++#ifdef VERBOSE
++ dev_dbg(&ts->spi->dev, "UP\n");
++#endif
++ }
++
+ /* measurement cycle ended */
+ if (!device_suspended(&ts->spi->dev)) {
+ ts->irq_disabled = 0;
+ enable_irq(ts->spi->irq);
+ }
+ ts->pending = 0;
+- ts->msg_idx = 0;
+ } else {
+ /* pen is still down, continue with the measurement */
+ ts->msg_idx = 0;
+@@ -528,6 +707,7 @@
+ }
+
+ spin_unlock_irq(&ts->lock);
++ return HRTIMER_NORESTART;
+ }
+
+ static irqreturn_t ads7846_irq(int irq, void *handle)
+@@ -546,7 +726,8 @@
+ ts->irq_disabled = 1;
+ disable_irq(ts->spi->irq);
+ ts->pending = 1;
+- mod_timer(&ts->timer, jiffies);
++ hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
++ HRTIMER_REL);
+ }
+ }
+ spin_unlock_irqrestore(&ts->lock, flags);
+@@ -632,6 +813,7 @@
+ struct ads7846_platform_data *pdata = spi->dev.platform_data;
+ struct spi_message *m;
+ struct spi_transfer *x;
++ int vref;
+ int err;
+
+ if (!spi->irq) {
+@@ -665,6 +847,10 @@
+ * may not. So we stick to very-portable 8 bit words, both RX and TX.
+ */
+ spi->bits_per_word = 8;
++ spi->mode = SPI_MODE_1;
++ err = spi_setup(spi);
++ if (err < 0)
++ return err;
+
+ ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
+ input_dev = input_allocate_device();
+@@ -679,8 +865,7 @@
+ ts->spi = spi;
+ ts->input = input_dev;
+
+- init_timer(&ts->timer);
+- ts->timer.data = (unsigned long) ts;
++ hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
+ ts->timer.function = ads7846_timer;
+
+ spin_lock_init(&ts->lock);
+@@ -689,14 +874,25 @@
+ ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
+ ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+ ts->pressure_max = pdata->pressure_max ? : ~0;
+- if (pdata->debounce_max) {
++
++ if (pdata->filter != NULL) {
++ if (pdata->filter_init != NULL) {
++ err = pdata->filter_init(pdata, &ts->filter_data);
++ if (err < 0)
++ goto err_free_mem;
++ }
++ ts->filter = pdata->filter;
++ ts->filter_cleanup = pdata->filter_cleanup;
++ } else if (pdata->debounce_max) {
+ ts->debounce_max = pdata->debounce_max;
++ if (ts->debounce_max < 2)
++ ts->debounce_max = 2;
+ ts->debounce_tol = pdata->debounce_tol;
+ ts->debounce_rep = pdata->debounce_rep;
+- if (ts->debounce_rep > ts->debounce_max + 1)
+- ts->debounce_rep = ts->debounce_max - 1;
++ ts->filter = ads7846_debounce;
++ ts->filter_data = ts;
+ } else
+- ts->debounce_tol = ~0;
++ ts->filter = ads7846_no_filter;
+ ts->get_pendown_state = pdata->get_pendown_state;
+
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
+@@ -718,6 +914,8 @@
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ pdata->pressure_min, pdata->pressure_max, 0, 0);
+
++ vref = pdata->keep_vref_on;
++
+ /* set up the transfers to read touchscreen state; this assumes we
+ * use formula #2 for pressure, not #3.
+ */
+@@ -727,7 +925,7 @@
+ spi_message_init(m);
+
+ /* y- still on; turn on only y+ (and ADC) */
+- ts->read_y = READ_Y;
++ ts->read_y = READ_Y(vref);
+ x->tx_buf = &ts->read_y;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+@@ -737,7 +935,7 @@
+ x->len = 2;
+ spi_message_add_tail(x, m);
+
+- m->complete = ads7846_debounce;
++ m->complete = ads7846_rx_val;
+ m->context = ts;
+
+ m++;
+@@ -745,7 +943,7 @@
+
+ /* turn y- off, x+ on, then leave in lowpower */
+ x++;
+- ts->read_x = READ_X;
++ ts->read_x = READ_X(vref);
+ x->tx_buf = &ts->read_x;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+@@ -755,7 +953,7 @@
+ x->len = 2;
+ spi_message_add_tail(x, m);
+
+- m->complete = ads7846_debounce;
++ m->complete = ads7846_rx_val;
+ m->context = ts;
+
+ /* turn y+ off, x- on; we'll use formula #2 */
+@@ -764,7 +962,7 @@
+ spi_message_init(m);
+
+ x++;
+- ts->read_z1 = READ_Z1;
++ ts->read_z1 = READ_Z1(vref);
+ x->tx_buf = &ts->read_z1;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+@@ -774,14 +972,14 @@
+ x->len = 2;
+ spi_message_add_tail(x, m);
+
+- m->complete = ads7846_debounce;
++ m->complete = ads7846_rx_val;
+ m->context = ts;
+
+ m++;
+ spi_message_init(m);
+
+ x++;
+- ts->read_z2 = READ_Z2;
++ ts->read_z2 = READ_Z2(vref);
+ x->tx_buf = &ts->read_z2;
+ x->len = 1;
+ spi_message_add_tail(x, m);
+@@ -791,7 +989,7 @@
+ x->len = 2;
+ spi_message_add_tail(x, m);
+
+- m->complete = ads7846_debounce;
++ m->complete = ads7846_rx_val;
+ m->context = ts;
+ }
+
+@@ -820,31 +1018,24 @@
+ spi->dev.driver->name, ts)) {
+ dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+ err = -EBUSY;
+- goto err_free_mem;
++ goto err_cleanup_filter;
+ }
+
++ err = ads784x_hwmon_register(spi, ts);
++ if (err)
++ goto err_free_irq;
++
+ dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
+
+- /* take a first sample, leaving nPENIRQ active; avoid
++ /* take a first sample, leaving nPENIRQ active and vREF off; avoid
+ * the touchscreen, in case it's not connected.
+ */
+ (void) ads7846_read12_ser(&spi->dev,
+ READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+
+- switch (ts->model) {
+- case 7846:
+- ts->attr_group = &ads7846_attr_group;
+- break;
+- case 7845:
+- ts->attr_group = &ads7845_attr_group;
+- break;
+- default:
+- ts->attr_group = &ads7843_attr_group;
+- break;
+- }
+- err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
++ err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
+ if (err)
+- goto err_free_irq;
++ goto err_remove_hwmon;
+
+ err = input_register_device(input_dev);
+ if (err)
+@@ -853,9 +1044,14 @@
+ return 0;
+
+ err_remove_attr_group:
+- sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
++ sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
++ err_remove_hwmon:
++ ads784x_hwmon_unregister(spi, ts);
+ err_free_irq:
+ free_irq(spi->irq, ts);
++ err_cleanup_filter:
++ if (ts->filter_cleanup)
++ ts->filter_cleanup(ts->filter_data);
+ err_free_mem:
+ input_free_device(input_dev);
+ kfree(ts);
+@@ -866,16 +1062,20 @@
+ {
+ struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
++ ads784x_hwmon_unregister(spi, ts);
+ input_unregister_device(ts->input);
+
+ ads7846_suspend(spi, PMSG_SUSPEND);
+
+- sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
++ sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
+
+ free_irq(ts->spi->irq, ts);
+ /* suspend left the IRQ disabled */
+ enable_irq(ts->spi->irq);
+
++ if (ts->filter_cleanup)
++ ts->filter_cleanup(ts->filter_data);
++
+ kfree(ts);
+
+ dev_dbg(&spi->dev, "unregistered touchscreen\n");
+diff -urN linux-2.6.20.4-0rig/drivers/leds/Kconfig linux-2.6.20.4-atmel/drivers/leds/Kconfig
+--- linux-2.6.20.4-0rig/drivers/leds/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/leds/Kconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -76,6 +76,13 @@
+ This option enables support for the Soekris net4801 and net4826 error
+ LED.
+
++config LEDS_AT91
++ tristate "LED support using AT91 GPIOs"
++ depends on LEDS_CLASS && ARCH_AT91 && !LEDS
++ help
++ This option enables support for LEDs connected to GPIO lines
++ on AT91-based boards.
++
+ config LEDS_WRAP
+ tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS && SCx200_GPIO
+diff -urN linux-2.6.20.4-0rig/drivers/leds/leds-at91.c linux-2.6.20.4-atmel/drivers/leds/leds-at91.c
+--- linux-2.6.20.4-0rig/drivers/leds/leds-at91.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/leds/leds-at91.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,140 @@
++/*
++ * AT91 GPIO based LED driver
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */
++
++struct at91_led {
++ struct led_classdev cdev;
++ struct list_head list;
++ struct at91_gpio_led *led_data;
++};
++
++/*
++ * Change the state of the LED.
++ */
++static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
++{
++ struct at91_led *led = container_of(cdev, struct at91_led, cdev);
++ short active = (value == LED_OFF);
++
++ if (led->led_data->flags & 1) /* active high/low? */
++ active = !active;
++ at91_set_gpio_value(led->led_data->gpio, value == LED_OFF);
++}
++
++static int __devexit at91_led_remove(struct platform_device *pdev)
++{
++ struct at91_led *led;
++
++ list_for_each_entry (led, &at91_led_list, list)
++ led_classdev_unregister(&led->cdev);
++
++#warning "Free allocated memory"
++ // TODO: Free memory. kfree(led);
++
++ return 0;
++}
++
++static int __init at91_led_probe(struct platform_device *pdev)
++{
++ int status = 0;
++ struct at91_gpio_led *pdata = pdev->dev.platform_data;
++ unsigned nr_leds;
++ struct at91_led *led;
++
++ if (!pdata)
++ return -ENODEV;
++
++ nr_leds = pdata->index; /* first index stores number of LEDs */
++
++ while (nr_leds--) {
++ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
++ if (!led) {
++ dev_err(&pdev->dev, "No memory for device\n");
++ status = -ENOMEM;
++ goto cleanup;
++ }
++ led->led_data = pdata;
++ led->cdev.name = pdata->name;
++ led->cdev.brightness_set = at91_led_set,
++ led->cdev.default_trigger = pdata->trigger;
++
++ status = led_classdev_register(&pdev->dev, &led->cdev);
++ if (status < 0) {
++ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
++cleanup:
++ at91_led_remove(pdev);
++ break;
++ }
++ list_add(&led->list, &at91_led_list);
++ pdata++;
++ }
++ return status;
++}
++
++#ifdef CONFIG_PM
++static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
++{
++ struct at91_led *led;
++
++ list_for_each_entry (led, &at91_led_list, list)
++ led_classdev_suspend(&led->cdev);
++
++ return 0;
++}
++
++static int at91_led_resume(struct platform_device *dev)
++{
++ struct at91_led *led;
++
++ list_for_each_entry (led, &at91_led_list, list)
++ led_classdev_resume(&led->cdev);
++
++ return 0;
++}
++#else
++#define at91_led_suspend NULL
++#define at91_led_resume NULL
++#endif
++
++static struct platform_driver at91_led_driver = {
++ .probe = at91_led_probe,
++ .remove = __devexit_p(at91_led_remove),
++ .suspend = at91_led_suspend,
++ .resume = at91_led_resume,
++ .driver = {
++ .name = "at91_leds",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91_led_init(void)
++{
++ return platform_driver_register(&at91_led_driver);
++}
++module_init(at91_led_init);
++
++static void __exit at91_led_exit(void)
++{
++ platform_driver_unregister(&at91_led_driver);
++}
++module_exit(at91_led_exit);
++
++MODULE_DESCRIPTION("AT91 GPIO LED driver");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/leds/Makefile linux-2.6.20.4-atmel/drivers/leds/Makefile
+--- linux-2.6.20.4-0rig/drivers/leds/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/leds/Makefile 2007-03-24 16:39:15.000000000 +0100
+@@ -14,6 +14,7 @@
+ obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
+ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
+ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
++obj-$(CONFIG_LEDS_AT91) += leds-at91.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+diff -urN linux-2.6.20.4-0rig/drivers/mmc/at91_mci.c linux-2.6.20.4-atmel/drivers/mmc/at91_mci.c
+--- linux-2.6.20.4-0rig/drivers/mmc/at91_mci.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mmc/at91_mci.c 2007-03-24 16:39:15.000000000 +0100
+@@ -64,6 +64,7 @@
+ #include <linux/err.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/clk.h>
++#include <linux/atmel_pdc.h>
+
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/protocol.h>
+@@ -75,7 +76,7 @@
+ #include <asm/arch/cpu.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91_mci.h>
+-#include <asm/arch/at91_pdc.h>
++
+
+ #define DRIVER_NAME "at91_mci"
+
+@@ -85,8 +86,8 @@
+ #define FL_SENT_STOP (1 << 1)
+
+ #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
+- | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
+- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
++ | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
++ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
+
+ #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
+ #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
+@@ -211,13 +212,13 @@
+
+ /* Check to see if this needs filling */
+ if (i == 0) {
+- if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
++ if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
+ pr_debug("Transfer active in current\n");
+ continue;
+ }
+ }
+ else {
+- if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
++ if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
+ pr_debug("Transfer active in next\n");
+ continue;
+ }
+@@ -234,12 +235,12 @@
+ pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
+
+ if (i == 0) {
+- at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
+- at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
++ at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
++ at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
+ }
+ else {
+- at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
+- at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
++ at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
++ at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
+ }
+ }
+
+@@ -303,37 +304,12 @@
+ at91mci_pre_dma_read(host);
+ else {
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
+- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+ }
+
+ pr_debug("post dma read done\n");
+ }
+
+-/*
+- * Handle transmitted data
+- */
+-static void at91_mci_handle_transmitted(struct at91mci_host *host)
+-{
+- struct mmc_command *cmd;
+- struct mmc_data *data;
+-
+- pr_debug("Handling the transmit\n");
+-
+- /* Disable the transfer */
+- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+-
+- /* Now wait for cmd ready */
+- at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
+- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+-
+- cmd = host->cmd;
+- if (!cmd) return;
+-
+- data = cmd->data;
+- if (!data) return;
+-
+- data->bytes_xfered = host->total_length;
+-}
+
+ /*
+ * Enable the controller
+@@ -431,15 +407,15 @@
+ cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
+
+ if (!data) {
+- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
+- at91_mci_write(host, AT91_PDC_RPR, 0);
+- at91_mci_write(host, AT91_PDC_RCR, 0);
+- at91_mci_write(host, AT91_PDC_RNPR, 0);
+- at91_mci_write(host, AT91_PDC_RNCR, 0);
+- at91_mci_write(host, AT91_PDC_TPR, 0);
+- at91_mci_write(host, AT91_PDC_TCR, 0);
+- at91_mci_write(host, AT91_PDC_TNPR, 0);
+- at91_mci_write(host, AT91_PDC_TNCR, 0);
++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
++ at91_mci_write(host, ATMEL_PDC_RPR, 0);
++ at91_mci_write(host, ATMEL_PDC_RCR, 0);
++ at91_mci_write(host, ATMEL_PDC_RNPR, 0);
++ at91_mci_write(host, ATMEL_PDC_RNCR, 0);
++ at91_mci_write(host, ATMEL_PDC_TPR, 0);
++ at91_mci_write(host, ATMEL_PDC_TCR, 0);
++ at91_mci_write(host, ATMEL_PDC_TNPR, 0);
++ at91_mci_write(host, ATMEL_PDC_TNCR, 0);
+
+ at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
+ at91_mci_write(host, AT91_MCI_CMDR, cmdr);
+@@ -452,7 +428,7 @@
+ /*
+ * Disable the PDC controller
+ */
+- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+
+ if (cmdr & AT91_MCI_TRCMD_START) {
+ data->bytes_xfered = 0;
+@@ -474,15 +450,15 @@
+ */
+ host->total_length = block_length * blocks;
+ host->buffer = dma_alloc_coherent(NULL,
+- host->total_length,
+- &host->physical_address, GFP_KERNEL);
++ host->total_length,
++ &host->physical_address, GFP_KERNEL);
+
+ at91mci_sg_to_dma(host, data);
+
+ pr_debug("Transmitting %d bytes\n", host->total_length);
+
+- at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
+- at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
++ at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
++ at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
+ ier = AT91_MCI_TXBUFE;
+ }
+ }
+@@ -497,9 +473,9 @@
+
+ if (cmdr & AT91_MCI_TRCMD_START) {
+ if (cmdr & AT91_MCI_TRDIR)
+- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
+ else
+- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
+ }
+ return ier;
+ }
+@@ -561,9 +537,7 @@
+ pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
+ status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+
+- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
+- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
+- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
++ if (status & AT91_MCI_ERRORS) {
+ if ((status & AT91_MCI_RCRCE) &&
+ ((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
+ cmd->error = MMC_ERR_NONE;
+@@ -601,6 +575,32 @@
+ }
+
+ /*
++ * Handle transmitted data
++ */
++static void at91_mci_handle_transmitted(struct at91mci_host *host)
++{
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++
++ pr_debug("Handling the transmit\n");
++
++ /* Disable the transfer */
++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ /* Now wait for cmd ready */
++ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
++ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
++
++ cmd = host->cmd;
++ if (!cmd) return;
++
++ data = cmd->data;
++ if (!data) return;
++
++ data->bytes_xfered = host->total_length;
++}
++
++/*
+ * Set the IOS
+ */
+ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+@@ -665,15 +665,15 @@
+
+ int_status = at91_mci_read(host, AT91_MCI_SR);
+ int_mask = at91_mci_read(host, AT91_MCI_IMR);
+-
++
+ pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
+ int_status & int_mask);
+-
++
+ int_status = int_status & int_mask;
+
+ if (int_status & AT91_MCI_ERRORS) {
+ completed = 1;
+-
++
+ if (int_status & AT91_MCI_UNRE)
+ pr_debug("MMC: Underrun error\n");
+ if (int_status & AT91_MCI_OVRE)
+@@ -821,7 +821,7 @@
+ mmc->f_min = 375000;
+ mmc->f_max = 25000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+- mmc->caps = MMC_CAP_BYTEBLOCK;
++ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+@@ -853,15 +853,15 @@
+ host->baseaddr = ioremap(res->start, res->end - res->start + 1);
+ if (!host->baseaddr) {
+ clk_put(host->mci_clk);
+- mmc_free_host(mmc);
+ release_mem_region(res->start, res->end - res->start + 1);
++ mmc_free_host(mmc);
+ return -ENOMEM;
+ }
+
+ /*
+ * Reset hardware
+ */
+- clk_enable(host->mci_clk); /* Enable the peripheral clock */
++ clk_enable(host->mci_clk); /* Enable the peripheral clock */
+ at91_mci_disable(host);
+ at91_mci_enable(host);
+
+@@ -874,9 +874,9 @@
+ printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
+ clk_disable(host->mci_clk);
+ clk_put(host->mci_clk);
+- mmc_free_host(mmc);
+ iounmap(host->baseaddr);
+ release_mem_region(res->start, res->end - res->start + 1);
++ mmc_free_host(mmc);
+ return ret;
+ }
+
+@@ -930,13 +930,13 @@
+ mmc_remove_host(mmc);
+ free_irq(host->irq, host);
+
+- clk_disable(host->mci_clk); /* Disable the peripheral clock */
+- clk_put(host->mci_clk);
+-
+ iounmap(host->baseaddr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
++ clk_disable(host->mci_clk); /* Disable the peripheral clock */
++ clk_put(host->mci_clk);
++
+ mmc_free_host(mmc);
+ platform_set_drvdata(pdev, NULL);
+ pr_debug("MCI Removed\n");
+diff -urN linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.c linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.c
+--- linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,1218 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/protocol.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \
++ MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \
++ MCI_BIT(RTOE))
++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
++ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++ EVENT_CMD_COMPLETE = 0,
++ EVENT_CMD_ERROR,
++ EVENT_DATA_COMPLETE,
++ EVENT_DATA_ERROR,
++ EVENT_STOP_SENT,
++ EVENT_STOP_COMPLETE,
++ EVENT_STOP_ERROR,
++ EVENT_DMA_ERROR,
++ EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++ struct dma_request_sg req;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++struct atmel_mci {
++ struct mmc_host *mmc;
++ void __iomem *regs;
++ struct atmel_mci_dma dma;
++
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++
++ u32 stop_cmdr;
++ u32 stop_iflags;
++
++ struct tasklet_struct tasklet;
++ unsigned long pending_events;
++ unsigned long completed_events;
++ u32 error_status;
++
++ int present;
++ int detect_pin;
++ int wp_pin;
++
++ unsigned long bus_hz;
++ unsigned long mapbase;
++ struct clk *mck;
++ struct platform_device *pdev;
++
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++ struct dentry *debugfs_req;
++ struct dentry *debugfs_pending_events;
++ struct dentry *debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host) \
++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_cmd_error_is_complete(host) \
++ test_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_data_is_complete(host) \
++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host) \
++ test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host) \
++ test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host) \
++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_stop_error_is_complete(host) \
++ test_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_dma_error_is_complete(host) \
++ test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host) \
++ test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_cmd_error_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_clear_data_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_stop_error_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host) \
++ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_cmd_error_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_set_data_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_stop_error_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_set_dma_error_is_completed(host) \
++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host) \
++ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_cmd_error_complete(host) \
++ set_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_set_data_complete(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host) \
++ set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host) \
++ set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_stop_error_complete(host) \
++ set_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_set_dma_error_complete(host) \
++ set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host) \
++ set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_cmd_error_pending(host) \
++ set_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_set_data_pending(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host) \
++ set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host) \
++ set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_stop_error_pending(host) \
++ set_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_set_dma_error_pending(host) \
++ set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host) \
++ set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host) \
++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_cmd_error_pending(host) \
++ clear_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_clear_data_pending(host) \
++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host) \
++ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host) \
++ clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host) \
++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_stop_error_pending(host) \
++ clear_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_clear_dma_error_pending(host) \
++ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host) \
++ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++ unsigned int nbytes;
++ char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd, *stop;
++ struct mmc_data *data;
++ struct req_dbg_data *priv;
++ char *str;
++ unsigned long n = 0;
++
++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++ str = priv->str;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++
++ spin_lock_irq(&host->mmc->lock);
++ mrq = host->mrq;
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++ n = snprintf(str, DBG_REQ_BUF_SIZE,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[3], cmd->error);
++ if (n < DBG_REQ_BUF_SIZE && data)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "DATA %u * %u (%u) %x (err %u)\n",
++ data->blocks, data->blksz,
++ data->bytes_xfered, data->flags,
++ data->error);
++ if (n < DBG_REQ_BUF_SIZE && stop)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1],
++ stop->resp[2], stop->resp[3],
++ stop->error);
++ }
++ spin_unlock_irq(&host->mmc->lock);
++ mutex_unlock(&inode->i_mutex);
++
++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++ file->private_data = priv;
++
++ return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct req_dbg_data *priv = file->private_data;
++
++ return simple_read_from_buffer(buf, nbytes, ppos,
++ priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = req_dbg_open,
++ .llseek = no_llseek,
++ .read = req_dbg_read,
++ .release = req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&host->mmc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(host->regs + i * 4);
++ spin_unlock_irq(&host->mmc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++ struct mmc_host *mmc;
++ struct dentry *root, *regs;
++ struct resource *res;
++
++ mmc = host->mmc;
++ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ host->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++ regs->d_inode->i_size = res->end - res->start + 1;
++ host->debugfs_regs = regs;
++
++ host->debugfs_req = debugfs_create_file("req", 0400, root,
++ host, &req_dbg_fops);
++ if (!host->debugfs_req)
++ goto err_req;
++
++ host->debugfs_pending_events
++ = debugfs_create_u32("pending_events", 0400, root,
++ (u32 *)&host->pending_events);
++ if (!host->debugfs_pending_events)
++ goto err_pending_events;
++
++ host->debugfs_completed_events
++ = debugfs_create_u32("completed_events", 0400, root,
++ (u32 *)&host->completed_events);
++ if (!host->debugfs_completed_events)
++ goto err_completed_events;
++
++ return;
++
++err_completed_events:
++ debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++ debugfs_remove(host->debugfs_req);
++err_req:
++ debugfs_remove(host->debugfs_regs);
++err_regs:
++ debugfs_remove(host->debugfs_root);
++err_root:
++ host->debugfs_root = NULL;
++ dev_err(&host->pdev->dev,
++ "failed to initialize debugfs for %s\n",
++ mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++ if (host->debugfs_root) {
++ debugfs_remove(host->debugfs_completed_events);
++ debugfs_remove(host->debugfs_pending_events);
++ debugfs_remove(host->debugfs_req);
++ debugfs_remove(host->debugfs_regs);
++ debugfs_remove(host->debugfs_root);
++ host->debugfs_root = NULL;
++ }
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++ unsigned int ns)
++{
++ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++ struct mmc_data *data)
++{
++ static unsigned dtomul_to_shift[] = {
++ 0, 4, 7, 8, 10, 12, 16, 20
++ };
++ unsigned timeout;
++ unsigned dtocyc, dtomul;
++
++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++ for (dtomul = 0; dtomul < 8; dtomul++) {
++ unsigned shift = dtomul_to_shift[dtomul];
++ dtocyc = (timeout + (1 << shift) - 1) >> shift;
++ if (dtocyc < 15)
++ break;
++ }
++
++ if (dtomul >= 8) {
++ dtomul = 7;
++ dtocyc = 15;
++ }
++
++ pr_debug("%s: setting timeout to %u cycles\n",
++ mmc_hostname(host->mmc),
++ dtocyc << dtomul_to_shift[dtomul]);
++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++ | MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with interrupt flags to be handled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++ struct mmc_command *cmd,
++ u32 *cmd_flags)
++{
++ u32 cmdr;
++ u32 iflags;
++
++ cmd->error = MMC_ERR_NONE;
++
++ cmdr = 0;
++ BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
++ cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
++
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++ else
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ }
++
++ /*
++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++ * it's too difficult to determine whether this is an ACMD or
++ * not. Better make it 64.
++ */
++ cmdr |= MCI_BIT(MAXLAT);
++
++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++ cmdr |= MCI_BIT(OPDCMD);
++
++ iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
++ if (!(cmd->flags & MMC_RSP_CRC))
++ iflags &= ~MCI_BIT(RCRCE);
++
++ pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++ mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
++ (unsigned long)cmdr);
++
++ *cmd_flags = cmdr;
++ return iflags;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++ struct mmc_command *cmd,
++ u32 cmd_flags)
++{
++ WARN_ON(host->cmd);
++ host->cmd = cmd;
++
++ mci_writel(host, ARGR, cmd->arg);
++ mci_writel(host, CMDR, cmd_flags);
++
++ if (cmd->data)
++ dma_start_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 cmd_flags;
++
++ WARN_ON(host->data);
++ host->data = data;
++
++ atmci_set_timeout(host, data);
++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++ | MCI_BF(BLKLEN, data->blksz)));
++ host->dma.req.block_size = data->blksz;
++ host->dma.req.nr_blocks = data->blocks;
++
++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++ if (data->flags & MMC_DATA_STREAM)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else if (data->blocks > 1)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ else
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++ if (data->flags & MMC_DATA_READ) {
++ cmd_flags |= MCI_BIT(TRDIR);
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_FROM_DEVICE);
++ host->dma.req.periph_id = host->dma.rx_periph_id;
++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++ host->dma.req.data_reg = host->mapbase + MCI_RDR;
++ } else {
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_TO_DEVICE);
++ host->dma.req.periph_id = host->dma.tx_periph_id;
++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++ host->dma.req.data_reg = host->mapbase + MCI_TDR;
++ }
++ host->dma.req.sg = data->sg;
++
++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++ return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++ u32 iflags;
++ u32 cmdflags = 0;
++
++ iflags = mci_readl(host, IMR);
++ if (iflags)
++ printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
++
++ WARN_ON(host->mrq != NULL);
++ host->mrq = mrq;
++ host->pending_events = 0;
++ host->completed_events = 0;
++
++ iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
++
++ if (mrq->stop) {
++ BUG_ON(!data);
++
++ host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
++ &host->stop_cmdr);
++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++ if (!(data->flags & MMC_DATA_WRITE))
++ host->stop_cmdr |= MCI_BIT(TRDIR);
++ if (data->flags & MMC_DATA_STREAM)
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ }
++ if (data) {
++ cmdflags |= atmci_prepare_data(mmc, data);
++ iflags |= MCI_DATA_ERROR_FLAGS;
++ }
++
++ atmci_start_command(host, mrq->cmd, cmdflags);
++ mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ if (ios->clock) {
++ u32 clkdiv;
++
++ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++ if (clkdiv > 255)
++ clkdiv = 255;
++ mci_writel(host, MR, (clkdiv
++ | MCI_BIT(WRPROOF)
++ | MCI_BIT(RDPROOF)));
++ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ mci_writel(host, SDCR, 0);
++ break;
++ case MMC_BUS_WIDTH_4:
++ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++ break;
++ }
++
++ switch (ios->power_mode) {
++ case MMC_POWER_OFF:
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ break;
++ case MMC_POWER_UP:
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ break;
++ case MMC_POWER_ON:
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ break;
++ }
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++ int read_only = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ if (host->wp_pin >= 0) {
++ read_only = gpio_get_value(host->wp_pin);
++ pr_debug("%s: card is %s\n", mmc_hostname(mmc),
++ read_only ? "read-only" : "read-write");
++ } else {
++ pr_debug("%s: no pin for checking read-only switch."
++ " Assuming write-enable.\n", mmc_hostname(mmc));
++ }
++
++ return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++ .request = atmci_request,
++ .set_ios = atmci_set_ios,
++ .get_ro = atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ WARN_ON(host->cmd || host->data);
++ host->mrq = NULL;
++
++ mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++ u32 flags)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++ mci_writel(host, IER, host->stop_iflags);
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++ host->data = NULL;
++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++ ((data->flags & MMC_DATA_WRITE)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++ /*
++ * Data might complete before command for very short transfers
++ * (like READ_SCR)
++ */
++ if (mci_cmd_is_complete(host)
++ && (!data->stop || mci_stop_is_complete(host)))
++ atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_error(struct mmc_host *mmc,
++ struct mmc_command *cmd,
++ u32 status)
++{
++ pr_debug("%s: command error: status=0x%08x\n",
++ mmc_hostname(mmc), status);
++
++ if (status & MCI_BIT(RTOE))
++ cmd->error = MMC_ERR_TIMEOUT;
++ else if (status & MCI_BIT(RCRCE))
++ cmd->error = MMC_ERR_BADCRC;
++ else
++ cmd->error = MMC_ERR_FAILED;
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++ struct mmc_host *mmc = (struct mmc_host *)priv;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_request *mrq = host->mrq;
++ struct mmc_data *data = host->data;
++
++ pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
++ host->pending_events, host->completed_events,
++ mci_readl(host, IMR));
++
++ if (mci_clear_cmd_error_is_pending(host)) {
++ struct mmc_command *cmd;
++
++ mci_set_cmd_error_complete(host);
++ mci_clear_cmd_pending(host);
++ cmd = host->mrq->cmd;
++
++ if (cmd->data) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data = NULL;
++ }
++
++ atmci_command_error(mmc, cmd, host->error_status);
++ atmci_request_end(mmc, cmd->mrq);
++ }
++ if (mci_clear_stop_error_is_pending(host)) {
++ mci_set_stop_error_complete(host);
++ mci_clear_stop_pending(host);
++ atmci_command_error(mmc, host->mrq->stop,
++ host->error_status);
++ if (!host->data)
++ atmci_request_end(mmc, host->mrq);
++ }
++ if (mci_clear_cmd_is_pending(host)) {
++ mci_set_cmd_complete(host);
++ if (!mrq->data || mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_stop_is_pending(host)) {
++ mci_set_stop_complete(host);
++ if (mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_dma_error_is_pending(host)) {
++ mci_set_dma_error_complete(host);
++ mci_clear_data_pending(host);
++
++ /* DMA controller got bus error => invalid address */
++ data->error = MMC_ERR_INVALID;
++
++ printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
++ mmc_hostname(mmc), host->data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_error_is_pending(host)) {
++ u32 status = host->error_status;
++
++ mci_set_data_error_complete(host);
++ mci_clear_data_pending(host);
++
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
++ mmc_hostname(host->mmc), status);
++
++ if (status & MCI_BIT(DCRCE)) {
++ printk(KERN_DEBUG "%s: Data CRC error\n",
++ mmc_hostname(host->mmc));
++ data->error = MMC_ERR_BADCRC;
++ } else if (status & MCI_BIT(DTOE)) {
++ printk(KERN_DEBUG "%s: Data Timeout error\n",
++ mmc_hostname(host->mmc));
++ data->error = MMC_ERR_TIMEOUT;
++ } else {
++ printk(KERN_DEBUG "%s: Data FIFO error\n",
++ mmc_hostname(host->mmc));
++ data->error = MMC_ERR_FIFO;
++ }
++ printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
++ mmc_hostname(host->mmc), data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_is_pending(host)) {
++ mci_set_data_complete(host);
++ data->bytes_xfered = data->blocks * data->blksz;
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_card_detect_is_pending(host)) {
++ /* Reset controller if card is gone */
++ if (!host->present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
++
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host)
++ && !mci_cmd_error_is_complete(host)) {
++ mrq->cmd->error = MMC_ERR_TIMEOUT;
++ }
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = MMC_ERR_TIMEOUT;
++ atmci_data_complete(host, data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host)
++ && !mci_stop_error_is_complete(host)) {
++ mrq->stop->error = MMC_ERR_TIMEOUT;
++ }
++
++ host->cmd = NULL;
++ atmci_request_end(mmc, mrq);
++ }
++ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++ }
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_command *cmd = host->cmd;
++
++ /*
++ * Read the response now so that we're free to send a new
++ * command immediately.
++ */
++ cmd->resp[0] = mci_readl(host, RSPR);
++ cmd->resp[1] = mci_readl(host, RSPR);
++ cmd->resp[2] = mci_readl(host, RSPR);
++ cmd->resp[3] = mci_readl(host, RSPR);
++
++ mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
++ host->cmd = NULL;
++
++ if (mci_stop_sent_is_complete(host))
++ mci_set_stop_pending(host);
++ else
++ mci_set_cmd_pending(host);
++
++ tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++ struct mmc_data *data;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++ data = host->data;
++
++ if (data->stop && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, data, 0);
++
++ if (data->flags & MMC_DATA_READ) {
++ mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ } else {
++ /*
++ * For the WRITE case, wait for NOTBUSY. This function
++ * is called when everything has been written to the
++ * controller, not when the card is done programming.
++ */
++ mci_writel(host, IER, MCI_BIT(NOTBUSY));
++ }
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++
++ mci_set_dma_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 status, mask, pending;
++
++ spin_lock(&mmc->lock);
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++
++ do {
++ if (pending & MCI_CMD_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(CMDRDY)
++ | MCI_BIT(NOTBUSY)
++ | MCI_CMD_ERROR_FLAGS
++ | MCI_DATA_ERROR_FLAGS));
++ host->error_status = status;
++ host->cmd = NULL;
++ if (mci_stop_sent_is_complete(host))
++ mci_set_stop_error_pending(host);
++ else
++ mci_set_cmd_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_DATA_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ host->error_status = status;
++ mci_set_data_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_BIT(CMDRDY))
++ atmci_cmd_interrupt(mmc, status);
++ if (pending & MCI_BIT(NOTBUSY)) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++ } while (pending);
++
++ spin_unlock(&mmc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ int present = !gpio_get_value(irq_to_gpio(irq));
++
++ if (present != host->present) {
++ pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
++ present ? "inserted" : "removed");
++ host->present = present;
++ mci_set_card_detect_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++ return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++ struct mci_platform_data *board;
++ struct atmel_mci *host;
++ struct mmc_host *mmc;
++ struct resource *regs;
++ int irq;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ board = pdev->dev.platform_data;
++
++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ host = mmc_priv(mmc);
++ host->pdev = pdev;
++ host->mmc = mmc;
++ if (board) {
++ host->detect_pin = board->detect_pin;
++ host->wp_pin = board->wp_pin;
++ } else {
++ host->detect_pin = -1;
++ host->detect_pin = -1;
++ }
++
++ host->mck = clk_get(&pdev->dev, "mci_clk");
++ if (IS_ERR(host->mck)) {
++ ret = PTR_ERR(host->mck);
++ goto out_free_host;
++ }
++ clk_enable(host->mck);
++
++ ret = -ENOMEM;
++ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!host->regs)
++ goto out_disable_clk;
++
++ host->bus_hz = clk_get_rate(host->mck);
++ host->mapbase = regs->start;
++
++ mmc->ops = &atmci_ops;
++ mmc->f_min = (host->bus_hz + 511) / 512;
++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++ mmc->ocr_avail = 0x00100000;
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++ if (ret)
++ goto out_unmap;
++
++ /* Assume card is present if we don't have a detect pin */
++ host->present = 1;
++ if (host->detect_pin >= 0) {
++ if (gpio_request(host->detect_pin, "mmc_detect")) {
++ printk(KERN_WARNING "%s: no detect pin available\n",
++ mmc_hostname(host->mmc));
++ host->detect_pin = -1;
++ } else {
++ host->present = !gpio_get_value(host->detect_pin);
++ }
++ }
++ if (host->wp_pin >= 0) {
++ if (gpio_request(host->wp_pin, "mmc_wp")) {
++ printk(KERN_WARNING "%s: no WP pin available\n",
++ mmc_hostname(host->mmc));
++ host->wp_pin = -1;
++ }
++ }
++
++ /* TODO: Get this information from platform data */
++ ret = -ENOMEM;
++ host->dma.req.req.dmac = find_dma_controller(0);
++ if (!host->dma.req.req.dmac) {
++ printk(KERN_ERR
++ "mmci: No DMA controller available, aborting\n");
++ goto out_free_irq;
++ }
++ ret = dma_alloc_channel(host->dma.req.req.dmac);
++ if (ret < 0) {
++ printk(KERN_ERR
++ "mmci: Unable to allocate DMA channel, aborting\n");
++ goto out_free_irq;
++ }
++ host->dma.req.req.channel = ret;
++ host->dma.req.width = DMA_WIDTH_32BIT;
++ host->dma.req.req.xfer_complete = atmci_xfer_complete;
++ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++ host->dma.req.req.error = atmci_dma_error;
++ host->dma.rx_periph_id = 0;
++ host->dma.tx_periph_id = 1;
++
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++
++ platform_set_drvdata(pdev, host);
++
++ mmc_add_host(mmc);
++
++ if (host->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(host->detect_pin),
++ atmci_detect_change,
++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++ DRIVER_NAME, mmc);
++ if (ret) {
++ printk(KERN_ERR
++ "%s: could not request IRQ %d for detect pin\n",
++ mmc_hostname(mmc),
++ gpio_to_irq(host->detect_pin));
++ gpio_free(host->detect_pin);
++ host->detect_pin = -1;
++ }
++ }
++
++ printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
++ mmc_hostname(mmc), host->mapbase, irq);
++
++ atmci_init_debugfs(host);
++
++ return 0;
++
++out_free_irq:
++ if (host->detect_pin >= 0)
++ gpio_free(host->detect_pin);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++ free_irq(irq, mmc);
++out_unmap:
++ iounmap(host->regs);
++out_disable_clk:
++ clk_disable(host->mck);
++ clk_put(host->mck);
++out_free_host:
++ mmc_free_host(mmc);
++ return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++ struct atmel_mci *host = platform_get_drvdata(pdev);
++
++ platform_set_drvdata(pdev, NULL);
++
++ if (host) {
++ atmci_cleanup_debugfs(host);
++
++ if (host->detect_pin >= 0) {
++ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++ cancel_delayed_work(&host->mmc->detect);
++ gpio_free(host->detect_pin);
++ }
++
++ mmc_remove_host(host->mmc);
++
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ mci_readl(host, SR);
++
++ dma_release_channel(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++
++ free_irq(platform_get_irq(pdev, 0), host->mmc);
++ iounmap(host->regs);
++
++ clk_disable(host->mck);
++ clk_put(host->mck);
++
++ mmc_free_host(host->mmc);
++ }
++ return 0;
++}
++
++static struct platform_driver atmci_driver = {
++ .probe = atmci_probe,
++ .remove = __devexit_p(atmci_remove),
++ .driver = {
++ .name = DRIVER_NAME,
++ },
++};
++
++static int __init atmci_init(void)
++{
++ return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++ platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.h linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.h
+--- linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR 0x0000
++#define MCI_MR 0x0004
++#define MCI_DTOR 0x0008
++#define MCI_SDCR 0x000c
++#define MCI_ARGR 0x0010
++#define MCI_CMDR 0x0014
++#define MCI_BLKR 0x0018
++#define MCI_RSPR 0x0020
++#define MCI_RSPR1 0x0024
++#define MCI_RSPR2 0x0028
++#define MCI_RSPR3 0x002c
++#define MCI_RDR 0x0030
++#define MCI_TDR 0x0034
++#define MCI_SR 0x0040
++#define MCI_IER 0x0044
++#define MCI_IDR 0x0048
++#define MCI_IMR 0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET 0
++#define MCI_MCIEN_SIZE 1
++#define MCI_MCIDIS_OFFSET 1
++#define MCI_MCIDIS_SIZE 1
++#define MCI_PWSEN_OFFSET 2
++#define MCI_PWSEN_SIZE 1
++#define MCI_PWSDIS_OFFSET 3
++#define MCI_PWSDIS_SIZE 1
++#define MCI_SWRST_OFFSET 7
++#define MCI_SWRST_SIZE 1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET 0
++#define MCI_CLKDIV_SIZE 8
++#define MCI_PWSDIV_OFFSET 8
++#define MCI_PWSDIV_SIZE 3
++#define MCI_RDPROOF_OFFSET 11
++#define MCI_RDPROOF_SIZE 1
++#define MCI_WRPROOF_OFFSET 12
++#define MCI_WRPROOF_SIZE 1
++#define MCI_DMAPADV_OFFSET 14
++#define MCI_DMAPADV_SIZE 1
++#define MCI_BLKLEN_OFFSET 16
++#define MCI_BLKLEN_SIZE 16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET 0
++#define MCI_DTOCYC_SIZE 4
++#define MCI_DTOMUL_OFFSET 4
++#define MCI_DTOMUL_SIZE 3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET 0
++#define MCI_SDCSEL_SIZE 4
++#define MCI_SDCBUS_OFFSET 7
++#define MCI_SDCBUS_SIZE 1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET 0
++#define MCI_ARG_SIZE 32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET 0
++#define MCI_CMDNB_SIZE 6
++#define MCI_RSPTYP_OFFSET 6
++#define MCI_RSPTYP_SIZE 2
++#define MCI_SPCMD_OFFSET 8
++#define MCI_SPCMD_SIZE 3
++#define MCI_OPDCMD_OFFSET 11
++#define MCI_OPDCMD_SIZE 1
++#define MCI_MAXLAT_OFFSET 12
++#define MCI_MAXLAT_SIZE 1
++#define MCI_TRCMD_OFFSET 16
++#define MCI_TRCMD_SIZE 2
++#define MCI_TRDIR_OFFSET 18
++#define MCI_TRDIR_SIZE 1
++#define MCI_TRTYP_OFFSET 19
++#define MCI_TRTYP_SIZE 2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET 0
++#define MCI_BCNT_SIZE 16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET 0
++#define MCI_RSP_SIZE 32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET 0
++#define MCI_CMDRDY_SIZE 1
++#define MCI_RXRDY_OFFSET 1
++#define MCI_RXRDY_SIZE 1
++#define MCI_TXRDY_OFFSET 2
++#define MCI_TXRDY_SIZE 1
++#define MCI_BLKE_OFFSET 3
++#define MCI_BLKE_SIZE 1
++#define MCI_DTIP_OFFSET 4
++#define MCI_DTIP_SIZE 1
++#define MCI_NOTBUSY_OFFSET 5
++#define MCI_NOTBUSY_SIZE 1
++#define MCI_ENDRX_OFFSET 6
++#define MCI_ENDRX_SIZE 1
++#define MCI_ENDTX_OFFSET 7
++#define MCI_ENDTX_SIZE 1
++#define MCI_RXBUFF_OFFSET 14
++#define MCI_RXBUFF_SIZE 1
++#define MCI_TXBUFE_OFFSET 15
++#define MCI_TXBUFE_SIZE 1
++#define MCI_RINDE_OFFSET 16
++#define MCI_RINDE_SIZE 1
++#define MCI_RDIRE_OFFSET 17
++#define MCI_RDIRE_SIZE 1
++#define MCI_RCRCE_OFFSET 18
++#define MCI_RCRCE_SIZE 1
++#define MCI_RENDE_OFFSET 19
++#define MCI_RENDE_SIZE 1
++#define MCI_RTOE_OFFSET 20
++#define MCI_RTOE_SIZE 1
++#define MCI_DCRCE_OFFSET 21
++#define MCI_DCRCE_SIZE 1
++#define MCI_DTOE_OFFSET 22
++#define MCI_DTOE_SIZE 1
++#define MCI_OVRE_OFFSET 30
++#define MCI_OVRE_SIZE 1
++#define MCI_UNRE_OFFSET 31
++#define MCI_UNRE_SIZE 1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE 0
++#define MCI_DTOMUL_16_CYCLES 1
++#define MCI_DTOMUL_128_CYCLES 2
++#define MCI_DTOMUL_256_CYCLES 3
++#define MCI_DTOMUL_1024_CYCLES 4
++#define MCI_DTOMUL_4096_CYCLES 5
++#define MCI_DTOMUL_65536_CYCLES 6
++#define MCI_DTOMUL_1048576_CYCLES 7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP 0
++#define MCI_RSPTYP_48_BIT 1
++#define MCI_RSPTYP_136_BIT 2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD 0
++#define MCI_SPCMD_INIT_CMD 1
++#define MCI_SPCMD_SYNC_CMD 2
++#define MCI_SPCMD_INT_CMD 4
++#define MCI_SPCMD_INT_RESP 5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS 0
++#define MCI_TRCMD_START_TRANS 1
++#define MCI_TRCMD_STOP_TRANS 2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK 0
++#define MCI_TRTYP_MULTI_BLOCK 1
++#define MCI_TRTYP_STREAM 2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name) \
++ (1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value) \
++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
++ << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value) \
++ (((value) >> MCI_##name##_OFFSET) \
++ & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old) \
++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
++ << MCI_##name##_OFFSET)) \
++ | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg) \
++ __raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff -urN linux-2.6.20.4-0rig/drivers/mmc/Kconfig linux-2.6.20.4-atmel/drivers/mmc/Kconfig
+--- linux-2.6.20.4-0rig/drivers/mmc/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mmc/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -71,6 +71,16 @@
+
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
++ help
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_WBSD
+ tristate "Winbond W83L51xD SD/MMC Card Interface support"
+ depends on MMC && ISA_DMA_API
+diff -urN linux-2.6.20.4-0rig/drivers/mmc/Makefile linux-2.6.20.4-atmel/drivers/mmc/Makefile
+--- linux-2.6.20.4-0rig/drivers/mmc/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mmc/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -23,6 +23,7 @@
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+
+ mmc_core-y := mmc.o mmc_sysfs.o
+diff -urN linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0001.c linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0001.c
+--- linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0001.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0001.c 2007-03-24 16:42:29.000000000 +0100
+@@ -47,6 +47,7 @@
+ #define I82802AC 0x00ac
+ #define MANUFACTURER_ST 0x0020
+ #define M50LPW080 0x002F
++#define AT49BV640D 0x02de
+
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -153,6 +154,47 @@
+ }
+ #endif
+
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++ struct cfi_pri_atmel atmel_pri;
++ uint32_t features = 0;
++
++ /* Reverse byteswapping */
++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++ if (atmel_pri.Features & 0x01) /* chip erase supported */
++ features |= (1<<0);
++ if (atmel_pri.Features & 0x02) /* erase suspend supported */
++ features |= (1<<1);
++ if (atmel_pri.Features & 0x04) /* program suspend supported */
++ features |= (1<<2);
++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++ features |= (1<<9);
++ if (atmel_pri.Features & 0x20) /* page mode read supported */
++ features |= (1<<7);
++ if (atmel_pri.Features & 0x40) /* queued erase supported */
++ features |= (1<<4);
++ if (atmel_pri.Features & 0x80) /* Protection bits supported */
++ features |= (1<<6);
++
++ extp->FeatureSupport = features;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -221,6 +263,7 @@
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff -urN linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-24 16:42:29.000000000 +0100
+@@ -185,6 +185,10 @@
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@
+ #if !FORCE_WORD_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/at91_dataflash.c linux-2.6.20.4-atmel/drivers/mtd/devices/at91_dataflash.c
+--- linux-2.6.20.4-0rig/drivers/mtd/devices/at91_dataflash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mtd/devices/at91_dataflash.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,640 @@
++/*
++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
++ *
++ * Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++*/
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/pci.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/arch/spi.h>
++
++#undef DEBUG_DATAFLASH
++
++#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
++#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */
++
++#define OP_READ_CONTINUOUS 0xE8
++#define OP_READ_PAGE 0xD2
++#define OP_READ_BUFFER1 0xD4
++#define OP_READ_BUFFER2 0xD6
++#define OP_READ_STATUS 0xD7
++
++#define OP_ERASE_PAGE 0x81
++#define OP_ERASE_BLOCK 0x50
++
++#define OP_TRANSFER_BUF1 0x53
++#define OP_TRANSFER_BUF2 0x55
++#define OP_COMPARE_BUF1 0x60
++#define OP_COMPARE_BUF2 0x61
++
++#define OP_PROGRAM_VIA_BUF1 0x82
++#define OP_PROGRAM_VIA_BUF2 0x85
++
++struct dataflash_local
++{
++ int spi; /* SPI chip-select number */
++
++ unsigned int page_size; /* number of bytes per page */
++ unsigned short page_offset; /* page offset in flash address */
++};
++
++
++/* Detected DataFlash devices */
++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
++static int nr_devices = 0;
++
++/* ......................................................................... */
++
++#ifdef CONFIG_MTD_PARTITIONS
++
++static struct mtd_partition static_partitions_2M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 6 * 32 * 8 * 528, /* 6 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
++ }
++};
++
++static struct mtd_partition static_partitions_4M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 4 * 64 * 8 * 528, /* 4 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
++ }
++};
++
++#if defined(CONFIG_MACH_KAFA)
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ name: "romboot",
++ offset: 0,
++ size: 16 * 1056, /* 160 Kb */
++ mask_flags: MTD_WRITEABLE, /* read-only */
++ },
++ {
++ name: "uboot",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: 128 * 1056, /* 1 MB */
++ },
++ {
++ name: "kernel",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: 1024 * 1056, /* 1 MB */
++ },
++ {
++ name: "filesystem",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: MTDPART_SIZ_FULL,
++ }
++};
++
++#else
++
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
++ }
++};
++#endif
++
++static const char *part_probes[] = { "cmdlinepart", NULL, };
++
++#endif
++
++/* ......................................................................... */
++
++/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
++ SPI transfers occur at the same time, spi_access_bus() will serialize them.
++ If this is not valid, then either (i) each dataflash 'priv' structure
++ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
++ another mechanism. */
++static struct spi_transfer_list* spi_transfer_desc;
++
++/*
++ * Perform a SPI transfer to access the DataFlash device.
++ */
++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
++ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
++{
++ struct spi_transfer_list* list = spi_transfer_desc;
++
++ list->tx[0] = tx; list->txlen[0] = tx_len;
++ list->rx[0] = rx; list->rxlen[0] = rx_len;
++
++ list->tx[1] = txnext; list->txlen[1] = txnext_len;
++ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
++
++ list->nr_transfers = nr;
++
++ return spi_transfer(list);
++}
++
++/* ......................................................................... */
++
++/*
++ * Poll the DataFlash device until it is READY.
++ */
++static void at91_dataflash_waitready(void)
++{
++ char* command = kmalloc(2, GFP_KERNEL);
++
++ if (!command)
++ return;
++
++ do {
++ command[0] = OP_READ_STATUS;
++ command[1] = 0;
++
++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++ } while ((command[1] & 0x80) == 0);
++
++ kfree(command);
++}
++
++/*
++ * Return the status of the DataFlash device.
++ */
++static unsigned short at91_dataflash_status(void)
++{
++ unsigned short status;
++ char* command = kmalloc(2, GFP_KERNEL);
++
++ if (!command)
++ return 0;
++
++ command[0] = OP_READ_STATUS;
++ command[1] = 0;
++
++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++ status = command[1];
++
++ kfree(command);
++ return status;
++}
++
++/* ......................................................................... */
++
++/*
++ * Erase blocks of flash.
++ */
++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int pageaddr;
++ char* command;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
++#endif
++
++ /* Sanity checks */
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
++ return -EINVAL;
++ if ((instr->addr % priv->page_size) != 0)
++ return -EINVAL;
++
++ command = kmalloc(4, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ while (instr->len > 0) {
++ /* Calculate flash page address */
++ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
++
++ command[0] = OP_ERASE_PAGE;
++ command[1] = (pageaddr & 0x00FF0000) >> 16;
++ command[2] = (pageaddr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
++#endif
++
++ /* Send command to SPI device */
++ spi_access_bus(priv->spi);
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++
++ at91_dataflash_waitready(); /* poll status until ready */
++ spi_release_bus(priv->spi);
++
++ instr->addr += priv->page_size; /* next page */
++ instr->len -= priv->page_size;
++ }
++
++ kfree(command);
++
++ /* Inform MTD subsystem that erase is complete */
++ instr->state = MTD_ERASE_DONE;
++ if (instr->callback)
++ instr->callback(instr);
++
++ return 0;
++}
++
++/*
++ * Read from the DataFlash device.
++ * from : Start offset in flash device
++ * len : Amount to read
++ * retlen : About of data actually read
++ * buf : Buffer containing the data
++ */
++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int addr;
++ char* command;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_read: %lli .. %lli\n", from, from+len);
++#endif
++
++ *retlen = 0;
++
++ /* Sanity checks */
++ if (!len)
++ return 0;
++ if (from + len > mtd->size)
++ return -EINVAL;
++
++ /* Calculate flash page/byte address */
++ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
++
++ command = kmalloc(8, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ command[0] = OP_READ_CONTINUOUS;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++
++ /* Send command to SPI device */
++ spi_access_bus(priv->spi);
++ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
++ spi_release_bus(priv->spi);
++
++ *retlen = len;
++ kfree(command);
++ return 0;
++}
++
++/*
++ * Write to the DataFlash device.
++ * to : Start offset in flash device
++ * len : Amount to write
++ * retlen : Amount of data actually written
++ * buf : Buffer containing the data
++ */
++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int pageaddr, addr, offset, writelen;
++ size_t remaining;
++ u_char *writebuf;
++ unsigned short status;
++ int res = 0;
++ char* command;
++ char* tmpbuf = NULL;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_write: %lli .. %lli\n", to, to+len);
++#endif
++
++ *retlen = 0;
++
++ /* Sanity checks */
++ if (!len)
++ return 0;
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ command = kmalloc(4, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ pageaddr = ((unsigned)to / priv->page_size);
++ offset = ((unsigned)to % priv->page_size);
++ if (offset + len > priv->page_size)
++ writelen = priv->page_size - offset;
++ else
++ writelen = len;
++ writebuf = (u_char *)buf;
++ remaining = len;
++
++ /* Allocate temporary buffer */
++ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
++ if (!tmpbuf) {
++ kfree(command);
++ return -ENOMEM;
++ }
++
++ /* Gain access to the SPI bus */
++ spi_access_bus(priv->spi);
++
++ while (remaining > 0) {
++#ifdef DEBUG_DATAFLASH
++ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
++#endif
++
++ /* (1) Transfer to Buffer1 */
++ if (writelen != priv->page_size) {
++ addr = pageaddr << priv->page_offset;
++ command[0] = OP_TRANSFER_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++ at91_dataflash_waitready();
++ }
++
++ /* (2) Program via Buffer1 */
++ addr = (pageaddr << priv->page_offset) + offset;
++ command[0] = OP_PROGRAM_VIA_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
++ at91_dataflash_waitready();
++
++ /* (3) Compare to Buffer1 */
++ addr = pageaddr << priv->page_offset;
++ command[0] = OP_COMPARE_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++ at91_dataflash_waitready();
++
++ /* Get result of the compare operation */
++ status = at91_dataflash_status();
++ if ((status & 0x40) == 1) {
++ printk("at91_dataflash: Write error on page %i\n", pageaddr);
++ remaining = 0;
++ res = -EIO;
++ }
++
++ remaining = remaining - writelen;
++ pageaddr++;
++ offset = 0;
++ writebuf += writelen;
++ *retlen += writelen;
++
++ if (remaining > priv->page_size)
++ writelen = priv->page_size;
++ else
++ writelen = remaining;
++ }
++
++ /* Release SPI bus */
++ spi_release_bus(priv->spi);
++
++ kfree(tmpbuf);
++ kfree(command);
++ return res;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize and register DataFlash device with MTD subsystem.
++ */
++static int __init add_dataflash(int channel, char *name, int IDsize,
++ int nr_pages, int pagesize, int pageoffset)
++{
++ struct mtd_info *device;
++ struct dataflash_local *priv;
++#ifdef CONFIG_MTD_PARTITIONS
++ struct mtd_partition *mtd_parts = 0;
++ int mtd_parts_nr = 0;
++#endif
++
++ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
++ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
++ return 0;
++ }
++
++ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
++ if (!device)
++ return -ENOMEM;
++ memset(device, 0, sizeof(struct mtd_info));
++
++ device->name = (char *)&device[1];
++ sprintf(device->name, "%s.spi%d", name, channel);
++ device->size = nr_pages * pagesize;
++ device->erasesize = pagesize;
++ device->writesize = pagesize;
++ device->owner = THIS_MODULE;
++ device->type = MTD_DATAFLASH;
++ device->flags = MTD_WRITEABLE;
++ device->erase = at91_dataflash_erase;
++ device->read = at91_dataflash_read;
++ device->write = at91_dataflash_write;
++
++ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
++ if (!priv) {
++ kfree(device);
++ return -ENOMEM;
++ }
++ memset(priv, 0, sizeof(struct dataflash_local));
++
++ priv->spi = channel;
++ priv->page_size = pagesize;
++ priv->page_offset = pageoffset;
++ device->priv = priv;
++
++ mtd_devices[nr_devices] = device;
++ nr_devices++;
++ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
++
++#ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
++#endif
++ if (mtd_parts_nr <= 0) {
++ switch (IDsize) {
++ case SZ_2M:
++ mtd_parts = static_partitions_2M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
++ break;
++ case SZ_4M:
++ mtd_parts = static_partitions_4M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
++ break;
++ case SZ_8M:
++ mtd_parts = static_partitions_8M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
++ break;
++ }
++ }
++
++ if (mtd_parts_nr > 0) {
++#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
++ add_mtd_device(device);
++#endif
++ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
++ }
++#endif
++ return add_mtd_device(device); /* add whole device */
++}
++
++/*
++ * Detect and initialize DataFlash device connected to specified SPI channel.
++ *
++ * Device Density ID code Nr Pages Page Size Page offset
++ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
++ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
++ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
++ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
++ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
++ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
++ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
++ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
++ */
++static int __init at91_dataflash_detect(int channel)
++{
++ int res = 0;
++ unsigned short status;
++
++ spi_access_bus(channel);
++ status = at91_dataflash_status();
++ spi_release_bus(channel);
++ if (status != 0xff) { /* no dataflash device there */
++ switch (status & 0x3c) {
++ case 0x0c: /* 0 0 1 1 */
++ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
++ break;
++ case 0x14: /* 0 1 0 1 */
++ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
++ break;
++ case 0x1c: /* 0 1 1 1 */
++ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
++ break;
++ case 0x24: /* 1 0 0 1 */
++ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
++ break;
++ case 0x2c: /* 1 0 1 1 */
++ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
++ break;
++ case 0x34: /* 1 1 0 1 */
++ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
++ break;
++ case 0x3c: /* 1 1 1 1 */
++ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
++ break;
++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
++// case 0x10: /* 0 1 0 0 */
++// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
++// break;
++ default:
++ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
++ }
++ }
++
++ return res;
++}
++
++static int __init at91_dataflash_init(void)
++{
++ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++ if (!spi_transfer_desc)
++ return -ENOMEM;
++
++ /* DataFlash (SPI chip select 0) */
++ at91_dataflash_detect(0);
++
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++ /* DataFlash card (SPI chip select 3) */
++ at91_dataflash_detect(3);
++#endif
++
++ return 0;
++}
++
++static void __exit at91_dataflash_exit(void)
++{
++ int i;
++
++ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
++ if (mtd_devices[i]) {
++#ifdef CONFIG_MTD_PARTITIONS
++ del_mtd_partitions(mtd_devices[i]);
++#else
++ del_mtd_device(mtd_devices[i]);
++#endif
++ kfree(mtd_devices[i]->priv);
++ kfree(mtd_devices[i]);
++ }
++ }
++ nr_devices = 0;
++ kfree(spi_transfer_desc);
++}
++
++
++module_init(at91_dataflash_init);
++module_exit(at91_dataflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
+diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/Kconfig linux-2.6.20.4-atmel/drivers/mtd/devices/Kconfig
+--- linux-2.6.20.4-0rig/drivers/mtd/devices/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mtd/devices/Kconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -267,5 +267,11 @@
+ LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+ you have managed to wipe the first block.
+
+-endmenu
++config MTD_AT91_DATAFLASH
++ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
++ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
++ help
++ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
++ If you have such a board, say 'Y'.
+
++endmenu
+diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/Makefile linux-2.6.20.4-atmel/drivers/mtd/devices/Makefile
+--- linux-2.6.20.4-0rig/drivers/mtd/devices/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mtd/devices/Makefile 2007-03-24 16:39:15.000000000 +0100
+@@ -17,3 +17,4 @@
+ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
+diff -urN linux-2.6.20.4-0rig/drivers/mtd/nand/at91_nand.c linux-2.6.20.4-atmel/drivers/mtd/nand/at91_nand.c
+--- linux-2.6.20.4-0rig/drivers/mtd/nand/at91_nand.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/mtd/nand/at91_nand.c 2007-03-24 16:39:15.000000000 +0100
+@@ -82,6 +82,10 @@
+ at91_set_gpio_value(host->board->enable_pin, 1);
+ }
+
++#ifdef CONFIG_MTD_PARTITIONS
++const char *part_probes[] = { "cmdlinepart", NULL };
++#endif
++
+ /*
+ * Probe for the NAND device.
+ */
+@@ -151,6 +155,12 @@
+ #ifdef CONFIG_MTD_PARTITIONS
+ if (host->board->partition_info)
+ partitions = host->board->partition_info(mtd->size, &num_partitions);
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++ else {
++ mtd->name = "at91_nand";
++ num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
++ }
++#endif
+
+ if ((!partitions) || (num_partitions == 0)) {
+ printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+diff -urN linux-2.6.20.4-0rig/drivers/net/arm/at91_ether.c linux-2.6.20.4-atmel/drivers/net/arm/at91_ether.c
+--- linux-2.6.20.4-0rig/drivers/net/arm/at91_ether.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/net/arm/at91_ether.c 2007-03-24 16:39:15.000000000 +0100
+@@ -943,14 +943,22 @@
+ struct net_device *dev;
+ struct at91_private *lp;
+ unsigned int val;
+- int res;
++ struct resource *res;
++ int ret;
+
+ dev = alloc_etherdev(sizeof(struct at91_private));
+ if (!dev)
+ return -ENOMEM;
+
+- dev->base_addr = AT91_VA_BASE_EMAC;
+- dev->irq = AT91RM9200_ID_EMAC;
++ /* Get I/O base address and IRQ */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ free_netdev(dev);
++ return -ENODEV;
++ }
++ dev->base_addr = res->start;
++ dev->irq = platform_get_irq(pdev, 0);
++
+ SET_MODULE_OWNER(dev);
+
+ /* Install the interrupt handler */
+@@ -1023,12 +1031,12 @@
+ lp->phy_address = phy_address; /* MDI address of PHY */
+
+ /* Register the network interface */
+- res = register_netdev(dev);
+- if (res) {
++ ret = register_netdev(dev);
++ if (ret) {
+ free_irq(dev->irq, dev);
+ free_netdev(dev);
+ dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+- return res;
++ return ret;
+ }
+
+ /* Determine current link speed */
+@@ -1103,7 +1111,7 @@
+ case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
+ case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
+ case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
+- case MII_DP83847_ID: /* National Semiconductor DP83847: */
++ case MII_DP83847_ID: /* National Semiconductor DP83847: */
+ case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
+ case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
+ detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
+diff -urN linux-2.6.20.4-0rig/drivers/net/Kconfig linux-2.6.20.4-atmel/drivers/net/Kconfig
+--- linux-2.6.20.4-0rig/drivers/net/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/net/Kconfig 2007-03-24 16:39:15.000000000 +0100
+@@ -190,7 +190,7 @@
+
+ config MACB
+ tristate "Atmel MACB support"
+- depends on NET_ETHERNET && AVR32
++ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+ select MII
+ help
+ The Atmel MACB ethernet interface is found on many AT32 and AT91
+diff -urN linux-2.6.20.4-0rig/drivers/net/macb.c linux-2.6.20.4-atmel/drivers/net/macb.c
+--- linux-2.6.20.4-0rig/drivers/net/macb.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/net/macb.c 2007-03-24 16:42:28.000000000 +0100
+@@ -883,27 +883,15 @@
+ static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct macb *bp = netdev_priv(dev);
+- int ret;
+- unsigned long flags;
+-
+- spin_lock_irqsave(&bp->lock, flags);
+- ret = mii_ethtool_gset(&bp->mii, cmd);
+- spin_unlock_irqrestore(&bp->lock, flags);
+
+- return ret;
++ return mii_ethtool_gset(&bp->mii, cmd);
+ }
+
+ static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct macb *bp = netdev_priv(dev);
+- int ret;
+- unsigned long flags;
+-
+- spin_lock_irqsave(&bp->lock, flags);
+- ret = mii_ethtool_sset(&bp->mii, cmd);
+- spin_unlock_irqrestore(&bp->lock, flags);
+
+- return ret;
++ return mii_ethtool_sset(&bp->mii, cmd);
+ }
+
+ static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+@@ -932,17 +920,11 @@
+ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ struct macb *bp = netdev_priv(dev);
+- int ret;
+- unsigned long flags;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+- spin_lock_irqsave(&bp->lock, flags);
+- ret = generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
+- spin_unlock_irqrestore(&bp->lock, flags);
+-
+- return ret;
++ return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
+ }
+
+ static ssize_t macb_mii_show(const struct class_device *cd, char *buf,
+@@ -1046,6 +1028,14 @@
+
+ spin_lock_init(&bp->lock);
+
++#if defined(CONFIG_ARCH_AT91)
++ bp->pclk = clk_get(&pdev->dev, "macb_clk");
++ if (IS_ERR(bp->pclk)) {
++ dev_err(&pdev->dev, "failed to get macb_clk\n");
++ goto err_out_free_dev;
++ }
++ clk_enable(bp->pclk);
++#else
+ bp->pclk = clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(bp->pclk)) {
+ dev_err(&pdev->dev, "failed to get pclk\n");
+@@ -1059,6 +1049,7 @@
+
+ clk_enable(bp->pclk);
+ clk_enable(bp->hclk);
++#endif
+
+ bp->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ if (!bp->regs) {
+@@ -1119,9 +1110,17 @@
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->is_rmii)
++#if defined(CONFIG_ARCH_AT91)
++ macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
++#else
+ macb_writel(bp, USRIO, 0);
++#endif
+ else
++#if defined(CONFIG_ARCH_AT91)
++ macb_writel(bp, USRIO, MACB_BIT(CLKEN));
++#else
+ macb_writel(bp, USRIO, MACB_BIT(MII));
++#endif
+
+ bp->tx_pending = DEF_TX_RING_PENDING;
+
+@@ -1148,9 +1147,11 @@
+ err_out_iounmap:
+ iounmap(bp->regs);
+ err_out_disable_clocks:
++#ifndef CONFIG_ARCH_AT91
+ clk_disable(bp->hclk);
+- clk_disable(bp->pclk);
+ clk_put(bp->hclk);
++#endif
++ clk_disable(bp->pclk);
+ err_out_put_pclk:
+ clk_put(bp->pclk);
+ err_out_free_dev:
+@@ -1173,9 +1174,11 @@
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ iounmap(bp->regs);
++#ifndef CONFIG_ARCH_AT91
+ clk_disable(bp->hclk);
+- clk_disable(bp->pclk);
+ clk_put(bp->hclk);
++#endif
++ clk_disable(bp->pclk);
+ clk_put(bp->pclk);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+diff -urN linux-2.6.20.4-0rig/drivers/net/macb.h linux-2.6.20.4-atmel/drivers/net/macb.h
+--- linux-2.6.20.4-0rig/drivers/net/macb.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/net/macb.h 2007-03-24 16:39:15.000000000 +0100
+@@ -200,7 +200,7 @@
+ #define MACB_SOF_OFFSET 30
+ #define MACB_SOF_SIZE 2
+
+-/* Bitfields in USRIO */
++/* Bitfields in USRIO (AVR32) */
+ #define MACB_MII_OFFSET 0
+ #define MACB_MII_SIZE 1
+ #define MACB_EAM_OFFSET 1
+@@ -210,6 +210,12 @@
+ #define MACB_TX_PAUSE_ZERO_OFFSET 3
+ #define MACB_TX_PAUSE_ZERO_SIZE 1
+
++/* Bitfields in USRIO (AT91) */
++#define MACB_RMII_OFFSET 0
++#define MACB_RMII_SIZE 1
++#define MACB_CLKEN_OFFSET 1
++#define MACB_CLKEN_SIZE 1
++
+ /* Bitfields in WOL */
+ #define MACB_IP_OFFSET 0
+ #define MACB_IP_SIZE 16
+diff -urN linux-2.6.20.4-0rig/drivers/pcmcia/at91_cf.c linux-2.6.20.4-atmel/drivers/pcmcia/at91_cf.c
+--- linux-2.6.20.4-0rig/drivers/pcmcia/at91_cf.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/pcmcia/at91_cf.c 2007-03-24 16:39:15.000000000 +0100
+@@ -333,20 +333,27 @@
+ struct at91_cf_data *board = cf->board;
+
+ pcmcia_socket_dev_suspend(&pdev->dev, mesg);
++
+ if (device_may_wakeup(&pdev->dev)) {
+ enable_irq_wake(board->det_pin);
+ if (board->irq_pin)
+ enable_irq_wake(board->irq_pin);
+- } else {
+- disable_irq_wake(board->det_pin);
+- if (board->irq_pin)
+- disable_irq_wake(board->irq_pin);
+ }
++
+ return 0;
+ }
+
+ static int at91_cf_resume(struct platform_device *pdev)
+ {
++ struct at91_cf_socket *cf = platform_get_drvdata(pdev);
++ struct at91_cf_data *board = cf->board;
++
++ if (device_may_wakeup(&pdev->dev)) {
++ disable_irq_wake(board->det_pin);
++ if (board->irq_pin)
++ disable_irq_wake(board->irq_pin);
++ }
++
+ pcmcia_socket_dev_resume(&pdev->dev);
+ return 0;
+ }
+diff -urN linux-2.6.20.4-0rig/drivers/serial/atmel_serial.c linux-2.6.20.4-atmel/drivers/serial/atmel_serial.c
+--- linux-2.6.20.4-0rig/drivers/serial/atmel_serial.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/serial/atmel_serial.c 2007-03-24 16:42:29.000000000 +0100
+@@ -7,6 +7,8 @@
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
++ * DMA support added by Chip Coldwell.
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+@@ -33,12 +35,14 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/atmel_pdc.h>
+
+ #include <asm/io.h>
+
+ #include <asm/mach/serial_at91.h>
+ #include <asm/arch/board.h>
+-#include <asm/arch/at91_pdc.h>
++
+ #ifdef CONFIG_ARM
+ #include <asm/arch/cpu.h>
+ #include <asm/arch/gpio.h>
+@@ -46,6 +50,11 @@
+
+ #include "atmel_serial.h"
+
++#define SUPPORT_PDC
++#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
++#warning "Revisit"
++#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
++
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+ #endif
+@@ -73,39 +82,46 @@
+
+ #define ATMEL_ISR_PASS_LIMIT 256
+
+-#define UART_PUT_CR(port,v) writel(v, (port)->membase + ATMEL_US_CR)
+-#define UART_GET_MR(port) readl((port)->membase + ATMEL_US_MR)
+-#define UART_PUT_MR(port,v) writel(v, (port)->membase + ATMEL_US_MR)
+-#define UART_PUT_IER(port,v) writel(v, (port)->membase + ATMEL_US_IER)
+-#define UART_PUT_IDR(port,v) writel(v, (port)->membase + ATMEL_US_IDR)
+-#define UART_GET_IMR(port) readl((port)->membase + ATMEL_US_IMR)
+-#define UART_GET_CSR(port) readl((port)->membase + ATMEL_US_CSR)
+-#define UART_GET_CHAR(port) readl((port)->membase + ATMEL_US_RHR)
+-#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + ATMEL_US_THR)
+-#define UART_GET_BRGR(port) readl((port)->membase + ATMEL_US_BRGR)
+-#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + ATMEL_US_BRGR)
+-#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + ATMEL_US_RTOR)
++#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
++#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
++#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
++#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
++#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
++#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
++#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
++#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
++#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
++#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
++#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
++#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+
+-// #define UART_GET_CR(port) readl((port)->membase + ATMEL_US_CR) // is write-only
++// #define UART_GET_CR(port) __raw_readl((port)->membase + ATMEL_US_CR) // is write-only
+
+ /* PDC registers */
+-#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + ATMEL_PDC_PTCR)
+-#define UART_GET_PTSR(port) readl((port)->membase + ATMEL_PDC_PTSR)
++#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
++#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
+
+-#define UART_PUT_RPR(port,v) writel(v, (port)->membase + ATMEL_PDC_RPR)
+-#define UART_GET_RPR(port) readl((port)->membase + ATMEL_PDC_RPR)
+-#define UART_PUT_RCR(port,v) writel(v, (port)->membase + ATMEL_PDC_RCR)
+-#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_RNPR)
+-#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_RNCR)
+-
+-#define UART_PUT_TPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TPR)
+-#define UART_PUT_TCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TCR)
+-//#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNPR)
+-//#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNCR)
++#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
++#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
++#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
++#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
++#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
++
++#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
++#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
++//#define UART_PUT_TNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
++//#define UART_PUT_TNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
+
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+
++struct atmel_dma_buffer {
++ unsigned char *buf;
++ dma_addr_t dma_addr;
++ size_t dma_size;
++ unsigned int ofs;
++};
++
+ /*
+ * We wrap our port structure around the generic uart_port.
+ */
+@@ -113,10 +129,20 @@
+ struct uart_port uart; /* uart */
+ struct clk *clk; /* uart clock */
+ unsigned short suspended; /* is port suspended? */
++
++ short use_dma_rx; /* enable PDC receiver */
++ short pdc_rx_idx; /* current PDC RX buffer */
++ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
++
++ short use_dma_tx; /* enable PDC transmitter */
++ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+ };
+
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+
++#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
++#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
++
+ #ifdef SUPPORT_SYSRQ
+ static struct console atmel_console;
+ #endif
+@@ -204,7 +230,12 @@
+ {
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- UART_PUT_IDR(port, ATMEL_US_TXRDY);
++ if (atmel_port->use_dma_tx) {
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ }
++ else
++ UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -214,7 +245,17 @@
+ {
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- UART_PUT_IER(port, ATMEL_US_TXRDY);
++ if (atmel_port->use_dma_tx) {
++ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
++ /* The transmitter is already running. Yes, we
++ really need this.*/
++ return;
++
++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
++ }
++ else
++ UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -224,7 +265,12 @@
+ {
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- UART_PUT_IDR(port, ATMEL_US_RXRDY);
++ if (atmel_port->use_dma_rx) {
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
++ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ }
++ else
++ UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+
+ /*
+@@ -247,6 +293,134 @@
+ }
+
+ /*
++ * Receive data via the PDC. A buffer has been fulled.
++ */
++static void atmel_pdc_endrx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++ unsigned int count;
++
++ count = pdc->dma_size - pdc->ofs;
++ if (likely(count > 0)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++ tty_flip_buffer_push(tty);
++
++ port->icount.rx += count;
++ }
++
++ /* Set this buffer as the next receive buffer */
++ pdc->ofs = 0;
++ UART_PUT_RNPR(port, pdc->dma_addr);
++ UART_PUT_RNCR(port, pdc->dma_size);
++
++ /* Switch to next buffer */
++ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
++}
++
++/*
++ * Receive data via the PDC. At least one byte was received, but the
++ * buffer was not full when the inter-character timeout expired.
++ */
++static void atmel_pdc_timeout(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++ /* unsigned */ int ofs, count;
++
++ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
++ count = ofs - pdc->ofs;
++
++ if (likely(count > 0)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++ tty_flip_buffer_push(tty);
++
++ pdc->ofs = ofs;
++ port->icount.rx += count;
++ }
++
++ /* reset the UART timeout */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++}
++
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
++{
++ /* clear error */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
++ if (status & ATMEL_US_RXBRK) {
++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
++ port->icount.brk++;
++ }
++ if (status & ATMEL_US_PARE)
++ port->icount.parity++;
++ if (status & ATMEL_US_FRAME)
++ port->icount.frame++;
++ if (status & ATMEL_US_OVRE)
++ port->icount.overrun++;
++}
++
++/*
++ * A transmission via the PDC is complete.
++ */
++static void atmel_pdc_endtx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++ xmit->tail += pdc->ofs;
++ if (xmit->tail >= SERIAL_XMIT_SIZE)
++ xmit->tail -= SERIAL_XMIT_SIZE;
++
++ port->icount.tx += pdc->ofs;
++ pdc->ofs = 0;
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
++}
++
++/*
++ * The PDC transmitter is idle, so either start the next transfer or
++ * disable the transmitter.
++ */
++static void atmel_pdc_txbufe(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ int count;
++
++ if (!uart_circ_empty(xmit)) {
++ /* more to transmit - setup next transfer */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++
++ if (xmit->tail < xmit->head)
++ count = xmit->head - xmit->tail;
++ else
++ count = SERIAL_XMIT_SIZE - xmit->tail;
++ pdc->ofs = count;
++
++ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++ UART_PUT_TCR(port, count);
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
++ }
++ else {
++ /* nothing left to transmit - disable the transmitter */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ }
++}
++
++/*
+ * Characters received (called from interrupt handler)
+ */
+ static void atmel_rx_chars(struct uart_port *port)
+@@ -348,6 +522,14 @@
+ status = UART_GET_CSR(port);
+ pending = status & UART_GET_IMR(port);
+ while (pending) {
++ /* PDC receive */
++ if (pending & ATMEL_US_ENDRX)
++ atmel_pdc_endrx(port);
++ if (pending & ATMEL_US_TIMEOUT)
++ atmel_pdc_timeout(port);
++ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
++ atmel_pdc_rxerr(port, pending);
++
+ /* Interrupt receive */
+ if (pending & ATMEL_US_RXRDY)
+ atmel_rx_chars(port);
+@@ -362,6 +544,12 @@
+ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
++ /* PDC transmit */
++ if (pending & ATMEL_US_ENDTX)
++ atmel_pdc_endtx(port);
++ if (pending & ATMEL_US_TXBUFE)
++ atmel_pdc_txbufe(port);
++
+ /* Interrupt transmit */
+ if (pending & ATMEL_US_TXRDY)
+ atmel_tx_chars(port);
+@@ -400,6 +588,47 @@
+ }
+
+ /*
++ * Initialize DMA (if necessary)
++ */
++ if (atmel_port->use_dma_rx) {
++ int i;
++
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++ if (pdc->buf == NULL) {
++ if (i != 0) {
++ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++ kfree(atmel_port->pdc_rx[0].buf);
++ }
++ free_irq(port->irq, port);
++ return -ENOMEM;
++ }
++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++ pdc->dma_size = PDC_BUFFER_SIZE;
++ pdc->ofs = 0;
++ }
++
++ atmel_port->pdc_rx_idx = 0;
++
++ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
++
++ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
++ }
++ if (atmel_port->use_dma_tx) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ struct circ_buf *xmit = &port->info->xmit;
++
++ pdc->buf = xmit->buf;
++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
++ pdc->dma_size = SERIAL_XMIT_SIZE;
++ pdc->ofs = 0;
++ }
++
++ /*
+ * If there is a specific "open" function (to register
+ * control line interrupts)
+ */
+@@ -417,7 +646,15 @@
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
+
+- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
++ if (atmel_port->use_dma_rx) {
++ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++
++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
++ }
++ else
++ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
+
+ return 0;
+ }
+@@ -430,6 +667,25 @@
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+ /*
++ * Shut-down the DMA.
++ */
++ if (atmel_port->use_dma_rx) {
++ int i;
++
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ kfree(pdc->buf);
++ }
++ }
++ if (atmel_port->use_dma_tx) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++ }
++
++ /*
+ * Disable all interrupts, port and break condition.
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+@@ -480,6 +736,7 @@
+ */
+ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
+@@ -533,6 +790,9 @@
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= ATMEL_US_RXBRK;
+
++ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
++ UART_PUT_IER(port, port->read_status_mask);
++
+ /*
+ * Characters to ignore
+ */
+@@ -711,6 +971,11 @@
+ clk_enable(atmel_port->clk);
+ port->uartclk = clk_get_rate(atmel_port->clk);
+ }
++
++#ifdef SUPPORT_PDC
++ atmel_port->use_dma_rx = data->use_dma_rx;
++ atmel_port->use_dma_tx = data->use_dma_tx;
++#endif
+ }
+
+ /*
+diff -urN linux-2.6.20.4-0rig/drivers/spi/atmel_spi.c linux-2.6.20.4-atmel/drivers/spi/atmel_spi.c
+--- linux-2.6.20.4-0rig/drivers/spi/atmel_spi.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/spi/atmel_spi.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,699 @@
++/*
++ * Driver for Atmel AT32 and AT91 SPI Controllers
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#ifdef CONFIG_ARCH_AT91
++#include <asm/arch/cpu.h>
++#endif
++
++#include "atmel_spi.h"
++
++/*
++ * The core SPI transfer engine just talks to a register bank to set up
++ * DMA transfers; transfer queue progress is driven by IRQs. The clock
++ * framework provides the base clock, subdivided for each spi_device.
++ *
++ * Newer controllers, marked with "new_1" flag, have:
++ * - CR.LASTXFER
++ * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
++ * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
++ * - SPI_CSRx.CSAAT
++ * - SPI_CSRx.SBCR allows faster clocking
++ */
++struct atmel_spi {
++ spinlock_t lock;
++
++ void __iomem *regs;
++ int irq;
++ struct clk *clk;
++ struct platform_device *pdev;
++ unsigned new_1:1;
++
++ u8 stopping;
++ struct list_head queue;
++ struct spi_transfer *current_transfer;
++ unsigned long remaining_bytes;
++
++ void *buffer;
++ dma_addr_t buffer_dma;
++};
++
++#define BUFFER_SIZE PAGE_SIZE
++#define INVALID_DMA_ADDRESS 0xffffffff
++
++/*
++ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
++ * they assume that spi slave device state will not change on deselect, so
++ * that automagic deselection is OK. Not so! Workaround uses nCSx pins
++ * as GPIOs; or newer controllers have CSAAT and friends.
++ *
++ * Since the CSAAT functionality is a bit weird on newer controllers
++ * as well, we use GPIO to control nCSx pins on all controllers.
++ */
++
++static inline void cs_activate(struct spi_device *spi)
++{
++ unsigned gpio = (unsigned) spi->controller_data;
++ unsigned active = spi->mode & SPI_CS_HIGH;
++
++ dev_dbg(&spi->dev, "activate %u%s\n", gpio, active ? " (high)" : "");
++#ifdef CONFIG_ARCH_AT91
++ at91_set_gpio_value(gpio, active);
++#else
++ gpio_set_value(gpio, active);
++#endif
++}
++
++static inline void cs_deactivate(struct spi_device *spi)
++{
++ unsigned gpio = (unsigned) spi->controller_data;
++ unsigned active = spi->mode & SPI_CS_HIGH;
++
++ dev_dbg(&spi->dev, "DEactivate %u%s\n", gpio, active ? " (low)" : "");
++#ifdef CONFIG_ARCH_AT91
++ at91_set_gpio_value(gpio, !active);
++#else
++ gpio_set_value(gpio, !active);
++#endif
++}
++
++/*
++ * Submit next transfer for DMA.
++ * lock is held, spi irq is blocked
++ */
++static void atmel_spi_next_xfer(struct spi_master *master,
++ struct spi_message *msg)
++{
++ struct atmel_spi *as = spi_master_get_devdata(master);
++ struct spi_transfer *xfer;
++ u32 len;
++ dma_addr_t tx_dma, rx_dma;
++
++ xfer = as->current_transfer;
++ if (!xfer || as->remaining_bytes == 0) {
++ if (xfer)
++ xfer = list_entry(xfer->transfer_list.next,
++ struct spi_transfer, transfer_list);
++ else
++ xfer = list_entry(msg->transfers.next,
++ struct spi_transfer, transfer_list);
++ as->remaining_bytes = xfer->len;
++ as->current_transfer = xfer;
++ }
++
++ len = as->remaining_bytes;
++
++ tx_dma = xfer->tx_dma;
++ rx_dma = xfer->rx_dma;
++
++ /* use scratch buffer only when rx or tx data is unspecified */
++ if (rx_dma == INVALID_DMA_ADDRESS) {
++ rx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
++ }
++ if (tx_dma == INVALID_DMA_ADDRESS) {
++ tx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
++ memset(as->buffer, 0, len);
++ dma_sync_single_for_device(&as->pdev->dev,
++ as->buffer_dma, len, DMA_TO_DEVICE);
++ }
++
++ spi_writel(as, RPR, rx_dma);
++ spi_writel(as, TPR, tx_dma);
++
++ as->remaining_bytes -= len;
++ if (msg->spi->bits_per_word > 8)
++ len >>= 1;
++
++ /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
++ * mechanism might help avoid the IRQ latency between transfers
++ *
++ * We're also waiting for ENDRX before we start the next
++ * transfer because we need to handle some difficult timing
++ * issues otherwise. If we wait for ENDTX in one transfer and
++ * then starts waiting for ENDRX in the next, it's difficult
++ * to tell the difference between the ENDRX interrupt we're
++ * actually waiting for and the ENDRX interrupt of the
++ * previous transfer.
++ *
++ * It should be doable, though. Just not now...
++ */
++ spi_writel(as, TNCR, 0);
++ spi_writel(as, RNCR, 0);
++ spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
++
++ dev_dbg(&msg->spi->dev,
++ " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
++ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
++
++ wmb();
++ spi_writel(as, TCR, len);
++ spi_writel(as, RCR, len);
++ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
++}
++
++static void atmel_spi_next_message(struct spi_master *master)
++{
++ struct atmel_spi *as = spi_master_get_devdata(master);
++ struct spi_message *msg;
++ u32 mr;
++
++ BUG_ON(as->current_transfer);
++
++ msg = list_entry(as->queue.next, struct spi_message, queue);
++
++ /* Select the chip */
++ mr = spi_readl(as, MR);
++ mr = SPI_BFINS(PCS, ~(1 << msg->spi->chip_select), mr);
++ spi_writel(as, MR, mr);
++ cs_activate(msg->spi);
++
++ atmel_spi_next_xfer(master, msg);
++}
++
++static void
++atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
++{
++ xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
++ if (xfer->tx_buf)
++ xfer->tx_dma = dma_map_single(&as->pdev->dev,
++ (void *) xfer->tx_buf, xfer->len,
++ DMA_TO_DEVICE);
++ if (xfer->rx_buf)
++ xfer->rx_dma = dma_map_single(&as->pdev->dev,
++ xfer->rx_buf, xfer->len,
++ DMA_FROM_DEVICE);
++}
++
++static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
++ struct spi_transfer *xfer)
++{
++ if (xfer->tx_dma != INVALID_DMA_ADDRESS)
++ dma_unmap_single(master->cdev.dev, xfer->tx_dma,
++ xfer->len, DMA_TO_DEVICE);
++ if (xfer->rx_dma != INVALID_DMA_ADDRESS)
++ dma_unmap_single(master->cdev.dev, xfer->rx_dma,
++ xfer->len, DMA_FROM_DEVICE);
++}
++
++static void
++atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
++ struct spi_message *msg, int status)
++{
++ cs_deactivate(msg->spi);
++ list_del(&msg->queue);
++ msg->status = status;
++
++ dev_dbg(master->cdev.dev,
++ "xfer complete: %u bytes transferred\n",
++ msg->actual_length);
++
++ spin_unlock(&as->lock);
++ msg->complete(msg->context);
++ spin_lock(&as->lock);
++
++ as->current_transfer = NULL;
++
++ /* continue if needed */
++ if (list_empty(&as->queue) || as->stopping)
++ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
++ else
++ atmel_spi_next_message(master);
++}
++
++static irqreturn_t
++atmel_spi_interrupt(int irq, void *dev_id)
++{
++ struct spi_master *master = dev_id;
++ struct atmel_spi *as = spi_master_get_devdata(master);
++ struct spi_message *msg;
++ struct spi_transfer *xfer;
++ u32 status, pending, imr;
++ int ret = IRQ_NONE;
++
++ spin_lock(&as->lock);
++
++ xfer = as->current_transfer;
++ msg = list_entry(as->queue.next, struct spi_message, queue);
++
++ imr = spi_readl(as, IMR);
++ status = spi_readl(as, SR);
++ pending = status & imr;
++
++ if (pending & SPI_BIT(OVRES)) {
++ int timeout;
++
++ ret = IRQ_HANDLED;
++
++ spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX)
++ | SPI_BIT(OVRES)));
++
++ /*
++ * When we get an overrun, we disregard the current
++ * transfer. Data will not be copied back from any
++ * bounce buffer and msg->actual_len will not be
++ * updated with the last xfer.
++ *
++ * We will also not process any remaning transfers in
++ * the message.
++ *
++ * First, stop the transfer and unmap the DMA buffers.
++ */
++ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
++ if (!msg->is_dma_mapped)
++ atmel_spi_dma_unmap_xfer(master, xfer);
++
++ /* REVISIT: udelay in irq is unfriendly */
++ if (xfer->delay_usecs)
++ udelay(xfer->delay_usecs);
++
++ dev_warn(master->cdev.dev, "fifo overrun (%u/%u remaining)\n",
++ spi_readl(as, TCR), spi_readl(as, RCR));
++
++ /*
++ * Clean up DMA registers and make sure the data
++ * registers are empty.
++ */
++ spi_writel(as, RNCR, 0);
++ spi_writel(as, TNCR, 0);
++ spi_writel(as, RCR, 0);
++ spi_writel(as, TCR, 0);
++ for (timeout = 1000; timeout; timeout--)
++ if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
++ break;
++ if (!timeout)
++ dev_warn(master->cdev.dev,
++ "timeout waiting for TXEMPTY");
++ while (spi_readl(as, SR) & SPI_BIT(RDRF))
++ spi_readl(as, RDR);
++
++ /* Clear any overrun happening while cleaning up */
++ spi_readl(as, SR);
++
++ atmel_spi_msg_done(master, as, msg, -EIO);
++ } else if (pending & SPI_BIT(ENDRX)) {
++ ret = IRQ_HANDLED;
++
++ spi_writel(as, IDR, pending);
++
++ if (as->remaining_bytes == 0) {
++ msg->actual_length += xfer->len;
++
++ if (!msg->is_dma_mapped)
++ atmel_spi_dma_unmap_xfer(master, xfer);
++
++ /* REVISIT: udelay in irq is unfriendly */
++ if (xfer->delay_usecs)
++ udelay(xfer->delay_usecs);
++
++ if (msg->transfers.prev == &xfer->transfer_list) {
++ /* report completed message */
++ atmel_spi_msg_done(master, as, msg, 0);
++ } else {
++ if (xfer->cs_change) {
++ cs_deactivate(msg->spi);
++ udelay(1);
++ cs_activate(msg->spi);
++ }
++
++ /*
++ * Not done yet. Submit the next transfer.
++ *
++ * FIXME handle protocol options for xfer
++ */
++ atmel_spi_next_xfer(master, msg);
++ }
++ } else {
++ /*
++ * Keep going, we still have data to send in
++ * the current transfer.
++ */
++ atmel_spi_next_xfer(master, msg);
++ }
++ }
++
++ spin_unlock(&as->lock);
++
++ return ret;
++}
++
++#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
++
++static int atmel_spi_setup(struct spi_device *spi)
++{
++ struct atmel_spi *as;
++ u32 scbr, csr;
++ unsigned int bits = spi->bits_per_word;
++ unsigned long bus_hz, sck_hz;
++ unsigned int npcs_pin;
++ int ret;
++
++ as = spi_master_get_devdata(spi->master);
++
++ if (as->stopping)
++ return -ESHUTDOWN;
++
++ if (spi->chip_select > spi->master->num_chipselect) {
++ dev_dbg(&spi->dev,
++ "setup: invalid chipselect %u (%u defined)\n",
++ spi->chip_select, spi->master->num_chipselect);
++ return -EINVAL;
++ }
++
++ if (bits == 0)
++ bits = 8;
++ if (bits < 8 || bits > 16) {
++ dev_dbg(&spi->dev,
++ "setup: invalid bits_per_word %u (8 to 16)\n",
++ bits);
++ return -EINVAL;
++ }
++
++ if (spi->mode & ~MODEBITS) {
++ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
++ spi->mode & ~MODEBITS);
++ return -EINVAL;
++ }
++
++ /* speed zero convention is used by some upper layers */
++ bus_hz = clk_get_rate(as->clk);
++ if (spi->max_speed_hz) {
++ /* assume div32/fdiv/mbz == 0 */
++ if (!as->new_1)
++ bus_hz /= 2;
++ scbr = ((bus_hz + spi->max_speed_hz - 1)
++ / spi->max_speed_hz);
++ if (scbr >= (1 << SPI_SCBR_SIZE)) {
++ dev_dbg(&spi->dev, "setup: %d Hz too slow, scbr %u\n",
++ spi->max_speed_hz, scbr);
++ return -EINVAL;
++ }
++ } else
++ scbr = 0xff;
++ sck_hz = bus_hz / scbr;
++
++ csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8);
++ if (spi->mode & SPI_CPOL)
++ csr |= SPI_BIT(CPOL);
++ if (!(spi->mode & SPI_CPHA))
++ csr |= SPI_BIT(NCPHA);
++
++ /* TODO: DLYBS and DLYBCT */
++ csr |= SPI_BF(DLYBS, 10);
++ csr |= SPI_BF(DLYBCT, 10);
++
++ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
++ npcs_pin = (unsigned int)spi->controller_data;
++ if (!spi->controller_state) {
++#ifndef CONFIG_ARCH_AT91
++ ret = gpio_request(npcs_pin, "spi_npcs");
++ if (ret)
++ return ret;
++#endif
++ spi->controller_state = (void *)npcs_pin;
++#ifdef CONFIG_ARCH_AT91
++ at91_set_gpio_output(npcs_pin, 0);
++#else
++ gpio_direction_output(npcs_pin);
++#endif
++ }
++
++ dev_dbg(&spi->dev,
++ "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
++ sck_hz, bits, spi->mode, spi->chip_select, csr);
++
++ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
++
++ return 0;
++}
++
++static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
++{
++ struct atmel_spi *as;
++ struct spi_transfer *xfer;
++ unsigned long flags;
++ struct device *controller = spi->master->cdev.dev;
++
++ as = spi_master_get_devdata(spi->master);
++
++ dev_dbg(controller, "new message %p submitted for %s\n",
++ msg, spi->dev.bus_id);
++
++ if (unlikely(list_empty(&msg->transfers)
++ || !spi->max_speed_hz))
++ return -EINVAL;
++
++ if (as->stopping)
++ return -ESHUTDOWN;
++
++ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++ if (!(xfer->tx_buf || xfer->rx_buf)) {
++ dev_dbg(&spi->dev, "missing rx or tx buf\n");
++ return -EINVAL;
++ }
++
++ /* FIXME implement these protocol options!! */
++ if (xfer->bits_per_word || xfer->speed_hz) {
++ dev_dbg(&spi->dev, "no protocol options yet\n");
++ return -ENOPROTOOPT;
++ }
++ }
++
++ /* scrub dcache "early" */
++ if (!msg->is_dma_mapped) {
++ list_for_each_entry(xfer, &msg->transfers, transfer_list)
++ atmel_spi_dma_map_xfer(as, xfer);
++ }
++
++ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++ dev_dbg(controller,
++ " xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++ xfer, xfer->len,
++ xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma);
++ }
++
++ msg->status = -EINPROGRESS;
++ msg->actual_length = 0;
++
++ spin_lock_irqsave(&as->lock, flags);
++ list_add_tail(&msg->queue, &as->queue);
++ if (!as->current_transfer)
++ atmel_spi_next_message(spi->master);
++ spin_unlock_irqrestore(&as->lock, flags);
++
++ return 0;
++}
++
++static void atmel_spi_cleanup(const struct spi_device *spi)
++{
++#ifndef CONFIG_ARCH_AT91
++ if (spi->controller_state)
++ gpio_free((unsigned int)spi->controller_data);
++#endif
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int __init atmel_spi_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ int irq;
++ struct clk *clk;
++ int ret;
++ struct spi_master *master;
++ struct atmel_spi *as;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ clk = clk_get(&pdev->dev, "spi_clk");
++ if (IS_ERR(clk))
++ return PTR_ERR(clk);
++
++ /* setup spi core then atmel-specific driver state */
++ ret = -ENOMEM;
++ master = spi_alloc_master(&pdev->dev, sizeof *as);
++ if (!master)
++ goto out_free;
++
++ master->bus_num = pdev->id;
++ master->num_chipselect = 4;
++ master->setup = atmel_spi_setup;
++ master->transfer = atmel_spi_transfer;
++ master->cleanup = atmel_spi_cleanup;
++ platform_set_drvdata(pdev, master);
++
++ as = spi_master_get_devdata(master);
++
++ as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
++ &as->buffer_dma, GFP_KERNEL);
++ if (!as->buffer)
++ goto out_free;
++
++ spin_lock_init(&as->lock);
++ INIT_LIST_HEAD(&as->queue);
++ as->pdev = pdev;
++ as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
++ if (!as->regs)
++ goto out_free_buffer;
++ as->irq = irq;
++ as->clk = clk;
++#ifdef CONFIG_ARCH_AT91
++ if (!cpu_is_at91rm9200())
++ as->new_1 = 1;
++#endif
++
++ ret = request_irq(irq, atmel_spi_interrupt, 0,
++ pdev->dev.bus_id, master);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Initialize the hardware */
++ clk_enable(clk);
++ spi_writel(as, CR, SPI_BIT(SWRST));
++ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
++ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
++ spi_writel(as, CR, SPI_BIT(SPIEN));
++
++ /* go! */
++ dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
++ (unsigned long)regs->start, irq);
++
++ ret = spi_register_master(master);
++ if (ret)
++ goto out_reset_hw;
++
++ return 0;
++
++out_reset_hw:
++ spi_writel(as, CR, SPI_BIT(SWRST));
++ clk_disable(clk);
++ free_irq(irq, master);
++out_unmap_regs:
++ iounmap(as->regs);
++out_free_buffer:
++ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
++ as->buffer_dma);
++out_free:
++ clk_put(clk);
++ spi_master_put(master);
++ return ret;
++}
++
++static int __exit atmel_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master = platform_get_drvdata(pdev);
++ struct atmel_spi *as = spi_master_get_devdata(master);
++ struct spi_message *msg;
++
++ /* reset the hardware and block queue progress */
++ spin_lock_irq(&as->lock);
++ as->stopping = 1;
++ spi_writel(as, CR, SPI_BIT(SWRST));
++ spi_readl(as, SR);
++ spin_unlock_irq(&as->lock);
++
++ /* Terminate remaining queued transfers */
++ list_for_each_entry(msg, &as->queue, queue) {
++ /* REVISIT unmapping the dma is a NOP on ARM and AVR32
++ * but we shouldn't depend on that...
++ */
++ msg->status = -ESHUTDOWN;
++ msg->complete(msg->context);
++ }
++
++ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
++ as->buffer_dma);
++
++ clk_disable(as->clk);
++ clk_put(as->clk);
++ free_irq(as->irq, master);
++ iounmap(as->regs);
++
++ spi_unregister_master(master);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
++{
++ struct spi_master *master = platform_get_drvdata(pdev);
++ struct atmel_spi *as = spi_master_get_devdata(master);
++
++ clk_disable(as->clk);
++ return 0;
++}
++
++static int atmel_spi_resume(struct platform_device *pdev)
++{
++ struct spi_master *master = platform_get_drvdata(pdev);
++ struct atmel_spi *as = spi_master_get_devdata(master);
++
++ clk_enable(as->clk);
++ return 0;
++}
++
++#else
++#define atmel_spi_suspend NULL
++#define atmel_spi_resume NULL
++#endif
++
++
++static struct platform_driver atmel_spi_driver = {
++ .driver = {
++ .name = "atmel_spi",
++ .owner = THIS_MODULE,
++ },
++ .suspend = atmel_spi_suspend,
++ .resume = atmel_spi_resume,
++ .remove = __exit_p(atmel_spi_remove),
++};
++
++static int __init atmel_spi_init(void)
++{
++ return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
++}
++module_init(atmel_spi_init);
++
++static void __exit atmel_spi_exit(void)
++{
++ platform_driver_unregister(&atmel_spi_driver);
++}
++module_exit(atmel_spi_exit);
++
++MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/spi/atmel_spi.h linux-2.6.20.4-atmel/drivers/spi/atmel_spi.h
+--- linux-2.6.20.4-0rig/drivers/spi/atmel_spi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/spi/atmel_spi.h 2007-03-24 16:43:57.000000000 +0100
+@@ -0,0 +1,167 @@
++/*
++ * Register definitions for Atmel Serial Peripheral Interface (SPI)
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ATMEL_SPI_H__
++#define __ATMEL_SPI_H__
++
++/* SPI register offsets */
++#define SPI_CR 0x0000
++#define SPI_MR 0x0004
++#define SPI_RDR 0x0008
++#define SPI_TDR 0x000c
++#define SPI_SR 0x0010
++#define SPI_IER 0x0014
++#define SPI_IDR 0x0018
++#define SPI_IMR 0x001c
++#define SPI_CSR0 0x0030
++#define SPI_CSR1 0x0034
++#define SPI_CSR2 0x0038
++#define SPI_CSR3 0x003c
++#define SPI_RPR 0x0100
++#define SPI_RCR 0x0104
++#define SPI_TPR 0x0108
++#define SPI_TCR 0x010c
++#define SPI_RNPR 0x0110
++#define SPI_RNCR 0x0114
++#define SPI_TNPR 0x0118
++#define SPI_TNCR 0x011c
++#define SPI_PTCR 0x0120
++#define SPI_PTSR 0x0124
++
++/* Bitfields in CR */
++#define SPI_SPIEN_OFFSET 0
++#define SPI_SPIEN_SIZE 1
++#define SPI_SPIDIS_OFFSET 1
++#define SPI_SPIDIS_SIZE 1
++#define SPI_SWRST_OFFSET 7
++#define SPI_SWRST_SIZE 1
++#define SPI_LASTXFER_OFFSET 24
++#define SPI_LASTXFER_SIZE 1
++
++/* Bitfields in MR */
++#define SPI_MSTR_OFFSET 0
++#define SPI_MSTR_SIZE 1
++#define SPI_PS_OFFSET 1
++#define SPI_PS_SIZE 1
++#define SPI_PCSDEC_OFFSET 2
++#define SPI_PCSDEC_SIZE 1
++#define SPI_FDIV_OFFSET 3
++#define SPI_FDIV_SIZE 1
++#define SPI_MODFDIS_OFFSET 4
++#define SPI_MODFDIS_SIZE 1
++#define SPI_LLB_OFFSET 7
++#define SPI_LLB_SIZE 1
++#define SPI_PCS_OFFSET 16
++#define SPI_PCS_SIZE 4
++#define SPI_DLYBCS_OFFSET 24
++#define SPI_DLYBCS_SIZE 8
++
++/* Bitfields in RDR */
++#define SPI_RD_OFFSET 0
++#define SPI_RD_SIZE 16
++
++/* Bitfields in TDR */
++#define SPI_TD_OFFSET 0
++#define SPI_TD_SIZE 16
++
++/* Bitfields in SR */
++#define SPI_RDRF_OFFSET 0
++#define SPI_RDRF_SIZE 1
++#define SPI_TDRE_OFFSET 1
++#define SPI_TDRE_SIZE 1
++#define SPI_MODF_OFFSET 2
++#define SPI_MODF_SIZE 1
++#define SPI_OVRES_OFFSET 3
++#define SPI_OVRES_SIZE 1
++#define SPI_ENDRX_OFFSET 4
++#define SPI_ENDRX_SIZE 1
++#define SPI_ENDTX_OFFSET 5
++#define SPI_ENDTX_SIZE 1
++#define SPI_RXBUFF_OFFSET 6
++#define SPI_RXBUFF_SIZE 1
++#define SPI_TXBUFE_OFFSET 7
++#define SPI_TXBUFE_SIZE 1
++#define SPI_NSSR_OFFSET 8
++#define SPI_NSSR_SIZE 1
++#define SPI_TXEMPTY_OFFSET 9
++#define SPI_TXEMPTY_SIZE 1
++#define SPI_SPIENS_OFFSET 16
++#define SPI_SPIENS_SIZE 1
++
++/* Bitfields in CSR0 */
++#define SPI_CPOL_OFFSET 0
++#define SPI_CPOL_SIZE 1
++#define SPI_NCPHA_OFFSET 1
++#define SPI_NCPHA_SIZE 1
++#define SPI_CSAAT_OFFSET 3
++#define SPI_CSAAT_SIZE 1
++#define SPI_BITS_OFFSET 4
++#define SPI_BITS_SIZE 4
++#define SPI_SCBR_OFFSET 8
++#define SPI_SCBR_SIZE 8
++#define SPI_DLYBS_OFFSET 16
++#define SPI_DLYBS_SIZE 8
++#define SPI_DLYBCT_OFFSET 24
++#define SPI_DLYBCT_SIZE 8
++
++/* Bitfields in RCR */
++#define SPI_RXCTR_OFFSET 0
++#define SPI_RXCTR_SIZE 16
++
++/* Bitfields in TCR */
++#define SPI_TXCTR_OFFSET 0
++#define SPI_TXCTR_SIZE 16
++
++/* Bitfields in RNCR */
++#define SPI_RXNCR_OFFSET 0
++#define SPI_RXNCR_SIZE 16
++
++/* Bitfields in TNCR */
++#define SPI_TXNCR_OFFSET 0
++#define SPI_TXNCR_SIZE 16
++
++/* Bitfields in PTCR */
++#define SPI_RXTEN_OFFSET 0
++#define SPI_RXTEN_SIZE 1
++#define SPI_RXTDIS_OFFSET 1
++#define SPI_RXTDIS_SIZE 1
++#define SPI_TXTEN_OFFSET 8
++#define SPI_TXTEN_SIZE 1
++#define SPI_TXTDIS_OFFSET 9
++#define SPI_TXTDIS_SIZE 1
++
++/* Constants for BITS */
++#define SPI_BITS_8_BPT 0
++#define SPI_BITS_9_BPT 1
++#define SPI_BITS_10_BPT 2
++#define SPI_BITS_11_BPT 3
++#define SPI_BITS_12_BPT 4
++#define SPI_BITS_13_BPT 5
++#define SPI_BITS_14_BPT 6
++#define SPI_BITS_15_BPT 7
++#define SPI_BITS_16_BPT 8
++
++/* Bit manipulation macros */
++#define SPI_BIT(name) \
++ (1 << SPI_##name##_OFFSET)
++#define SPI_BF(name,value) \
++ (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
++#define SPI_BFEXT(name,value) \
++ (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
++#define SPI_BFINS(name,value,old) \
++ ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
++ | SPI_BF(name,value))
++
++/* Register access macros */
++#define spi_readl(port,reg) \
++ __raw_readl((port)->regs + SPI_##reg)
++#define spi_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + SPI_##reg)
++
++#endif /* __ATMEL_SPI_H__ */
+diff -urN linux-2.6.20.4-0rig/drivers/spi/Kconfig linux-2.6.20.4-atmel/drivers/spi/Kconfig
+--- linux-2.6.20.4-0rig/drivers/spi/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/spi/Kconfig 2007-03-24 16:43:49.000000000 +0100
+@@ -51,6 +51,21 @@
+ comment "SPI Master Controller Drivers"
+ depends on SPI_MASTER
+
++config SPI_ATMEL
++ tristate "Atmel SPI Controller"
++ depends on (ARCH_AT91 || AVR32) && SPI_MASTER
++ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
++ help
++ This selects a driver for the Atmel SPI Controller, present on
++ many AT32 (AVR32) and AT91 (ARM) chips.
++
++config SPI_ATMEL
++ tristate "Atmel SPI Controller"
++ depends on (ARCH_AT91 || AVR32) && SPI_MASTER
++ help
++ This selects a driver for the Atmel SPI Controller, present on
++ many AT32 (AVR32) and AT91 (ARM) chips.
++
+ config SPI_BITBANG
+ tristate "Bitbanging SPI master"
+ depends on SPI_MASTER && EXPERIMENTAL
+@@ -75,6 +90,24 @@
+ inexpensive battery powered microcontroller evaluation board.
+ This same cable can be used to flash new firmware.
+
++config SPI_AT91
++ tristate "AT91RM9200 Bitbang SPI Master"
++ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
++ select SPI_BITBANG
++ select SPI_AT91_MANUAL_CS
++ help
++ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
++ The SPI_ATMEL driver will be its replacement, using the native
++ SPI hardware and its DMA controller.
++
++config SPI_AT91_MANUAL_CS
++ bool
++ depends on ARCH_AT91RM9200
++ help
++ Works around an AT91RM9200 problem whereby the SPI chip-select
++ will be wrongly disabled. The workaround uses those pins as
++ GPIOs instead of letting the SPI controller manage them.
++
+ config SPI_MPC83xx
+ tristate "Freescale MPC83xx SPI controller"
+ depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+diff -urN linux-2.6.20.4-0rig/drivers/spi/Makefile linux-2.6.20.4-atmel/drivers/spi/Makefile
+--- linux-2.6.20.4-0rig/drivers/spi/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/spi/Makefile 2007-03-24 16:39:15.000000000 +0100
+@@ -12,11 +12,14 @@
+
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
++obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
+ obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
+ obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
++obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
++obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+ # ... add above this line ...
+
+ # SPI protocol drivers (device/link on bus)
+diff -urN linux-2.6.20.4-0rig/drivers/spi/spi_at91_bitbang.c linux-2.6.20.4-atmel/drivers/spi/spi_at91_bitbang.c
+--- linux-2.6.20.4-0rig/drivers/spi/spi_at91_bitbang.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/spi/spi_at91_bitbang.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,207 @@
++/*
++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <asm/arch/gpio.h>
++
++
++/*
++ * FIXME this bitbanging version is just to help bootstrap systems until
++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
++ * be a drop-in replacement for this one, and much faster.
++ *
++ * remember:
++ *
++ * - other at91 parts (like at91sam9) have multiple controllers
++ * and different pin muxing; this version is at91rm9200 specfic.
++ *
++ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
++ *
++ * - rm9200 spi chipselects drop wrongly, so the native driver
++ * will need to use gpios much like this does.
++ *
++ * - real hardware only allows 8..16 bits per word, while this
++ * bitbanger allows 1..32 (incompatible superset).
++ *
++ * - this disregards clock parameters. with inlined gpio calls,
++ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
++ * than using the subroutined veresion from txrx_word().
++ *
++ * - suspend/resume and <linux/clk.h> support is missing ...
++ */
++
++#define spi_miso_bit AT91_PIN_PA0
++#define spi_mosi_bit AT91_PIN_PA1
++#define spi_sck_bit AT91_PIN_PA2
++
++struct at91_spi {
++ struct spi_bitbang bitbang;
++ struct platform_device *pdev;
++};
++
++/*----------------------------------------------------------------------*/
++
++static inline void setsck(struct spi_device *spi, int is_on)
++{
++ at91_set_gpio_value(spi_sck_bit, is_on);
++}
++
++static inline void setmosi(struct spi_device *spi, int is_on)
++{
++ at91_set_gpio_value(spi_mosi_bit, is_on);
++}
++
++static inline int getmiso(struct spi_device *spi)
++{
++ return at91_get_gpio_value(spi_miso_bit);
++}
++
++static void at91_spi_chipselect(struct spi_device *spi, int is_active)
++{
++ unsigned long cs = (unsigned long) spi->controller_data;
++
++ /* set default clock polarity */
++ if (is_active)
++ setsck(spi, spi->mode & SPI_CPOL);
++
++ /* only support active-low (default) */
++ at91_set_gpio_value(cs, !is_active);
++}
++
++/*
++ * NOTE: this is "as fast as we can"; it should be a function of
++ * the device clock ...
++ */
++#define spidelay(X) do{} while(0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
++}
++
++/*----------------------------------------------------------------------*/
++
++static int __init at91_spi_probe(struct platform_device *pdev)
++{
++ int status;
++ struct spi_master *master;
++ struct at91_spi *at91_spi;
++
++ if (pdev->id != 0) /* SPI0 bus */
++ return -EINVAL;
++
++ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
++ if (!master)
++ return -ENOMEM;
++
++ at91_spi = spi_master_get_devdata(master);
++ at91_spi->pdev = pdev;
++ platform_set_drvdata(pdev, at91_spi);
++
++ /* SPI and bitbang hookup */
++ master->bus_num = 0;
++ master->num_chipselect = 4;
++
++ at91_spi->bitbang.master = spi_master_get(master);
++ at91_spi->bitbang.chipselect = at91_spi_chipselect;
++ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
++ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
++ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
++ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
++
++ status = spi_bitbang_start(&at91_spi->bitbang);
++ if (status < 0)
++ (void) spi_master_put(at91_spi->bitbang.master);
++
++ return status;
++}
++
++static int __exit at91_spi_remove(struct platform_device *pdev)
++{
++ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
++ int status;
++
++ /* stop() unregisters child devices too */
++ status = spi_bitbang_stop(&at91_spi->bitbang);
++ (void) spi_master_put(at91_spi->bitbang.master);
++
++ platform_set_drvdata(pdev, NULL);
++ return status;
++}
++
++static struct platform_driver at91_spi_driver = {
++ .probe = at91_spi_probe,
++ .remove = __exit_p(at91_spi_remove),
++ .driver = {
++ .name = "at91_spi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91_spi_init(void)
++{
++ at91_set_gpio_output(spi_sck_bit, 0);
++ at91_set_gpio_output(spi_mosi_bit, 0);
++ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
++
++ /* register driver */
++ return platform_driver_register(&at91_spi_driver);
++}
++
++static void __exit at91_spi_exit(void)
++{
++ platform_driver_unregister(&at91_spi_driver);
++}
++
++device_initcall(at91_spi_init);
++module_exit(at91_spi_exit);
++
++MODULE_ALIAS("at91_spi.0");
++
++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.c linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.c
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.c 2007-03-24 16:39:15.000000000 +0100
+@@ -287,8 +287,8 @@
+ ep->stopped = stopped;
+
+ /* ep0 is always ready; other endpoints need a non-empty queue */
+- if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
+- at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
++ if (list_empty(&ep->queue) && (ep->id != 0))
++ at91_udp_write(udc, AT91_UDP_IDR, 1 << ep->id);
+ }
+
+ /*-------------------------------------------------------------------------*/
+@@ -541,7 +541,7 @@
+ * reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
+ * since endpoint resets don't reset hw pingpong state.
+ */
+- at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
++ at91_udp_write(dev, AT91_UDP_RST_EP, 1 << ep->id);
+ at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+
+ local_irq_restore(flags);
+@@ -567,7 +567,7 @@
+
+ /* reset fifos and endpoint */
+ if (ep->udc->clocked) {
+- at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
++ at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+ __raw_writel(0, ep->creg);
+ }
+@@ -715,7 +715,7 @@
+
+ if (req && !status) {
+ list_add_tail (&req->queue, &ep->queue);
+- at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
++ at91_udp_write(dev, AT91_UDP_IER, 1 << ep->id);
+ }
+ done:
+ local_irq_restore(flags);
+@@ -774,7 +774,7 @@
+ csr |= AT91_UDP_FORCESTALL;
+ VDBG("halt %s\n", ep->ep.name);
+ } else {
+- at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
++ at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+ csr &= ~AT91_UDP_FORCESTALL;
+ }
+@@ -913,14 +913,15 @@
+ at91_udp_write(udc, AT91_UDP_TXVC, 0);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 1);
+- else if (cpu_is_at91sam9260()) {
++ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+-
++
+ txvc |= AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+- } else if (cpu_is_at91sam9261()) {
++ }
++ else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+-
++
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr |= AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+@@ -928,20 +929,20 @@
+ } else {
+ stop_activity(udc);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+- if (cpu_is_at91rm9200())
+- at91_set_gpio_value(udc->board.pullup_pin, 0);
+- else if (cpu_is_at91sam9260()) {
+- u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+-
+- txvc &= ~AT91_UDP_TXVC_PUON;
+- at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+- } else if (cpu_is_at91sam9261()) {
+- u32 usbpucr;
+-
+- usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+- usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
+- at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+- }
++ if (cpu_is_at91rm9200())
++ at91_set_gpio_value(udc->board.pullup_pin, 0);
++ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
++ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
++
++ txvc &= ~AT91_UDP_TXVC_PUON;
++ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
++ } else if (cpu_is_at91sam9261()) {
++ u32 usbpucr;
++
++ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
++ usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
++ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
++ }
+ clk_off(udc);
+ }
+ }
+@@ -1228,7 +1229,7 @@
+ } else if (ep->is_in)
+ goto stall;
+
+- at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
++ at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
+ tmp = __raw_readl(ep->creg);
+ tmp |= CLR_FX;
+@@ -1504,15 +1505,16 @@
+ }
+ },
+ .ep[0] = {
++ .id = 0,
+ .ep = {
+ .name = ep0name,
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .maxpacket = 8,
+- .int_mask = 1 << 0,
+ },
+ .ep[1] = {
++ .id = 1,
+ .ep = {
+ .name = "ep1",
+ .ops = &at91_ep_ops,
+@@ -1520,9 +1522,9 @@
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 64,
+- .int_mask = 1 << 1,
+ },
+ .ep[2] = {
++ .id = 2,
+ .ep = {
+ .name = "ep2",
+ .ops = &at91_ep_ops,
+@@ -1530,9 +1532,9 @@
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 64,
+- .int_mask = 1 << 2,
+ },
+ .ep[3] = {
++ .id = 3,
+ .ep = {
+ /* could actually do bulk too */
+ .name = "ep3-int",
+@@ -1540,9 +1542,9 @@
+ },
+ .udc = &controller,
+ .maxpacket = 8,
+- .int_mask = 1 << 3,
+ },
+ .ep[4] = {
++ .id = 4,
+ .ep = {
+ .name = "ep4",
+ .ops = &at91_ep_ops,
+@@ -1550,9 +1552,9 @@
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 256,
+- .int_mask = 1 << 4,
+ },
+ .ep[5] = {
++ .id = 5,
+ .ep = {
+ .name = "ep5",
+ .ops = &at91_ep_ops,
+@@ -1560,7 +1562,6 @@
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 256,
+- .int_mask = 1 << 5,
+ },
+ /* ep6 and ep7 are also reserved (custom silicon might use them) */
+ };
+@@ -1679,9 +1680,7 @@
+ if (!res)
+ return -ENXIO;
+
+- if (!request_mem_region(res->start,
+- res->end - res->start + 1,
+- driver_name)) {
++ if (!request_mem_region(res->start, res->end - res->start + 1, driver_name)) {
+ DBG("someone's using UDC memory\n");
+ return -EBUSY;
+ }
+@@ -1807,16 +1806,13 @@
+ || !wake
+ || at91_suspend_entering_slow_clock()) {
+ pullup(udc, 0);
+- disable_irq_wake(udc->udp_irq);
++ wake = 0;
+ } else
+ enable_irq_wake(udc->udp_irq);
+
+- if (udc->board.vbus_pin > 0) {
+- if (wake)
+- enable_irq_wake(udc->board.vbus_pin);
+- else
+- disable_irq_wake(udc->board.vbus_pin);
+- }
++ udc->active_suspend = wake;
++ if (udc->board.vbus_pin > 0 && wake)
++ enable_irq_wake(udc->board.vbus_pin);
+ return 0;
+ }
+
+@@ -1824,8 +1820,14 @@
+ {
+ struct at91_udc *udc = platform_get_drvdata(pdev);
+
++ if (udc->board.vbus_pin > 0 && udc->active_suspend)
++ disable_irq_wake(udc->board.vbus_pin);
++
+ /* maybe reconnect to host; if so, clocks on */
+- pullup(udc, 1);
++ if (udc->active_suspend)
++ disable_irq_wake(udc->udp_irq);
++ else
++ pullup(udc, 1);
+ return 0;
+ }
+ #else
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.h linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.h
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.h 2007-03-24 16:39:15.000000000 +0100
+@@ -105,10 +105,10 @@
+ struct usb_ep ep;
+ struct list_head queue;
+ struct at91_udc *udc;
++ u8 id;
+ void __iomem *creg;
+
+ unsigned maxpacket:16;
+- u8 int_mask;
+ unsigned is_pingpong:1;
+
+ unsigned stopped:1;
+@@ -136,6 +136,7 @@
+ unsigned wait_for_addr_ack:1;
+ unsigned wait_for_config_ack:1;
+ unsigned selfpowered:1;
++ unsigned active_suspend:1;
+ u8 addr;
+ struct at91_udc_data board;
+ struct clk *iclk, *fclk;
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/ether.c linux-2.6.20.4-atmel/drivers/usb/gadget/ether.c
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/ether.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/ether.c 2007-03-24 16:42:28.000000000 +0100
+@@ -266,6 +266,10 @@
+ #define DEV_CONFIG_CDC
+ #endif
+
++#ifdef CONFIG_USB_GADGET_HUSB2DEV
++#define DEV_CONFIG_CDC
++#endif
++
+
+ /* For CDC-incapable hardware, choose the simple cdc subset.
+ * Anything that talks bulk (without notable bugs) can do this.
+@@ -428,7 +432,7 @@
+ #define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */
+
+ static struct usb_device_descriptor
+-device_desc = {
++device_desc __attribute__((aligned(2))) = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+@@ -454,7 +458,7 @@
+ };
+
+ static struct usb_config_descriptor
+-eth_config = {
++eth_config __attribute__((aligned(2))) = {
+ .bLength = sizeof eth_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+@@ -468,7 +472,7 @@
+
+ #ifdef CONFIG_USB_ETH_RNDIS
+ static struct usb_config_descriptor
+-rndis_config = {
++rndis_config __attribute__((aligned(2))) = {
+ .bLength = sizeof rndis_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+@@ -493,7 +497,7 @@
+
+ #ifdef DEV_CONFIG_CDC
+ static struct usb_interface_descriptor
+-control_intf = {
++control_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -509,7 +513,7 @@
+
+ #ifdef CONFIG_USB_ETH_RNDIS
+ static const struct usb_interface_descriptor
+-rndis_control_intf = {
++rndis_control_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof rndis_control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -524,7 +528,7 @@
+
+ #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+
+-static const struct usb_cdc_header_desc header_desc = {
++static const struct usb_cdc_header_desc __attribute__((aligned(2))) header_desc = {
+ .bLength = sizeof header_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+@@ -566,7 +570,8 @@
+
+ #ifdef DEV_CONFIG_CDC
+
+-static const struct usb_cdc_ether_desc ether_desc = {
++static const struct usb_cdc_ether_desc
++ether_desc __attribute__((aligned(2))) = {
+ .bLength = sizeof ether_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
+@@ -601,7 +606,7 @@
+ #define STATUS_BYTECOUNT 16 /* 8 byte header + data */
+
+ static struct usb_endpoint_descriptor
+-fs_status_desc = {
++fs_status_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -632,7 +637,7 @@
+ /* ... but the "real" data interface has two bulk endpoints */
+
+ static const struct usb_interface_descriptor
+-data_intf = {
++data_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -652,7 +657,7 @@
+ /* RNDIS doesn't activate by changing to the "real" altsetting */
+
+ static const struct usb_interface_descriptor
+-rndis_data_intf = {
++rndis_data_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof rndis_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -675,7 +680,7 @@
+ */
+
+ static const struct usb_interface_descriptor
+-subset_data_intf = {
++subset_data_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof subset_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -692,7 +697,7 @@
+
+
+ static struct usb_endpoint_descriptor
+-fs_source_desc = {
++fs_source_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -701,7 +706,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-fs_sink_desc = {
++fs_sink_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -767,7 +772,7 @@
+
+ #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+ static struct usb_endpoint_descriptor
+-hs_status_desc = {
++hs_status_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -778,7 +783,7 @@
+ #endif /* DEV_CONFIG_CDC */
+
+ static struct usb_endpoint_descriptor
+-hs_source_desc = {
++hs_source_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -787,7 +792,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-hs_sink_desc = {
++hs_sink_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -796,7 +801,7 @@
+ };
+
+ static struct usb_qualifier_descriptor
+-dev_qualifier = {
++dev_qualifier __attribute__((aligned(2))) = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/file_storage.c linux-2.6.20.4-atmel/drivers/usb/gadget/file_storage.c
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/file_storage.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/file_storage.c 2007-03-24 16:42:28.000000000 +0100
+@@ -854,7 +854,7 @@
+ #define CONFIG_VALUE 1
+
+ static struct usb_device_descriptor
+-device_desc = {
++device_desc __attribute__((aligned(2))) = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+@@ -873,7 +873,7 @@
+ };
+
+ static struct usb_config_descriptor
+-config_desc = {
++config_desc __attribute__((aligned(2))) = {
+ .bLength = sizeof config_desc,
+ .bDescriptorType = USB_DT_CONFIG,
+
+@@ -896,7 +896,7 @@
+ /* There is only one interface. */
+
+ static struct usb_interface_descriptor
+-intf_desc = {
++intf_desc __attribute__((aligned(2))) = {
+ .bLength = sizeof intf_desc,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -911,7 +911,7 @@
+ * and interrupt-in. */
+
+ static struct usb_endpoint_descriptor
+-fs_bulk_in_desc = {
++fs_bulk_in_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -921,7 +921,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-fs_bulk_out_desc = {
++fs_bulk_out_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -931,7 +931,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-fs_intr_in_desc = {
++fs_intr_in_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -963,7 +963,7 @@
+ * for the config descriptor.
+ */
+ static struct usb_qualifier_descriptor
+-dev_qualifier = {
++dev_qualifier __attribute__((aligned(2))) = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+@@ -974,7 +974,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-hs_bulk_in_desc = {
++hs_bulk_in_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -984,7 +984,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-hs_bulk_out_desc = {
++hs_bulk_out_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -995,7 +995,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-hs_intr_in_desc = {
++hs_intr_in_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/gadget_chips.h linux-2.6.20.4-atmel/drivers/usb/gadget/gadget_chips.h
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/gadget_chips.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/gadget_chips.h 2007-03-24 16:42:29.000000000 +0100
+@@ -75,6 +75,12 @@
+ #define gadget_is_pxa27x(g) 0
+ #endif
+
++#ifdef CONFIG_USB_GADGET_HUSB2DEV
++#define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name)
++#else
++#define gadget_is_husb2dev(g) 0
++#endif
++
+ #ifdef CONFIG_USB_GADGET_S3C2410
+ #define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name)
+ #else
+@@ -169,5 +175,7 @@
+ return 0x16;
+ else if (gadget_is_mpc8272(gadget))
+ return 0x17;
++ else if (gadget_is_husb2dev(gadget))
++ return 0x80;
+ return -ENOENT;
+ }
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.c linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.c
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,1997 @@
++/*
++ * Driver for the Atmel HUSB2device high speed USB device controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#undef DEBUG
++
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/usb_ch9.h>
++#include <linux/usb_gadget.h>
++#include <linux/dmapool.h>
++#include <linux/delay.h>
++
++#include <asm/io.h>
++
++#include "husb2_udc.h"
++
++#define DRIVER_VERSION "0.9"
++
++#define DMA_ADDR_INVALID (~(dma_addr_t)0)
++
++#define FIFO_IOMEM_ID 0
++#define CTRL_IOMEM_ID 1
++
++#ifdef DEBUG
++#define DBG_ERR 0x0001 /* report all error returns */
++#define DBG_HW 0x0002 /* debug hardware initialization */
++#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
++#define DBG_INT 0x0008 /* interrupts */
++#define DBG_BUS 0x0010 /* report changes in bus state */
++#define DBG_QUEUE 0x0020 /* debug request queue processing */
++#define DBG_FIFO 0x0040 /* debug FIFO contents */
++#define DBG_DMA 0x0080 /* debug DMA handling */
++#define DBG_REQ 0x0100 /* print out queued request length */
++#define DBG_ALL 0xffff
++#define DBG_NONE 0x0000
++
++#define DEBUG_LEVEL (DBG_ERR|DBG_REQ)
++#define DBG(level, fmt, ...) \
++ do { \
++ if ((level) & DEBUG_LEVEL) \
++ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
++ } while (0)
++#else
++#define DBG(level, fmt...)
++#endif
++
++static struct husb2_udc the_udc;
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <asm/uaccess.h>
++
++static int queue_dbg_open(struct inode *inode, struct file *file)
++{
++ struct husb2_ep *ep = inode->i_private;
++ struct husb2_request *req, *req_copy;
++ struct list_head *queue_data;
++
++ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
++ if (!queue_data)
++ return -ENOMEM;
++ INIT_LIST_HEAD(queue_data);
++
++ spin_lock_irq(&ep->udc->lock);
++ list_for_each_entry(req, &ep->queue, queue) {
++ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
++ if (!req_copy)
++ goto fail;
++ memcpy(req_copy, req, sizeof(*req_copy));
++ list_add_tail(&req_copy->queue, queue_data);
++ }
++ spin_unlock_irq(&ep->udc->lock);
++
++ file->private_data = queue_data;
++ return 0;
++
++fail:
++ spin_unlock_irq(&ep->udc->lock);
++ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
++ list_del(&req->queue);
++ kfree(req);
++ }
++ kfree(queue_data);
++ return -ENOMEM;
++}
++
++/*
++ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ *
++ * b: buffer address
++ * l: buffer length
++ * I/i: interrupt/no interrupt
++ * Z/z: zero/no zero
++ * S/s: short ok/short not ok
++ * s: status
++ * n: nr_packets
++ * F/f: submitted/not submitted to FIFO
++ * D/d: using/not using DMA
++ * L/l: last transaction/not last transaction
++ */
++static ssize_t queue_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct list_head *queue = file->private_data;
++ struct husb2_request *req, *tmp_req;
++ size_t len, remaining, actual = 0;
++ char tmpbuf[38];
++
++ if (!access_ok(VERIFY_WRITE, buf, nbytes))
++ return -EFAULT;
++
++ mutex_lock(&file->f_dentry->d_inode->i_mutex);
++ list_for_each_entry_safe(req, tmp_req, queue, queue) {
++ len = snprintf(tmpbuf, sizeof(tmpbuf),
++ "%8p %08x %c%c%c %5d %4u %c%c%c\n",
++ req->req.buf, req->req.length,
++ req->req.no_interrupt ? 'i' : 'I',
++ req->req.zero ? 'Z' : 'z',
++ req->req.short_not_ok ? 's' : 'S',
++ req->req.status,
++ req->nr_pkts,
++ req->submitted ? 'F' : 'f',
++ req->using_dma ? 'D' : 'd',
++ req->last_transaction ? 'L' : 'l');
++ len = min(len, sizeof(tmpbuf));
++ if (len > nbytes)
++ break;
++
++ list_del(&req->queue);
++ kfree(req);
++
++ remaining = __copy_to_user(buf, tmpbuf, len);
++ actual += len - remaining;
++ if (remaining)
++ break;
++
++ nbytes -= len;
++ buf += len;
++ }
++ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++
++ return actual;
++}
++
++static int queue_dbg_release(struct inode *inode, struct file *file)
++{
++ struct list_head *queue_data = file->private_data;
++ struct husb2_request *req, *tmp_req;
++
++ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
++ list_del(&req->queue);
++ kfree(req);
++ }
++ kfree(queue_data);
++ return 0;
++}
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct husb2_udc *udc;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ udc = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&udc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(udc->regs + i * 4);
++ spin_unlock_irq(&udc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++const struct file_operations queue_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = queue_dbg_open,
++ .llseek = no_llseek,
++ .read = queue_dbg_read,
++ .release = queue_dbg_release,
++};
++
++const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void husb2_ep_init_debugfs(struct husb2_udc *udc,
++ struct husb2_ep *ep)
++{
++ struct dentry *ep_root;
++
++ ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
++ if (!ep_root)
++ goto err_root;
++ ep->debugfs_dir = ep_root;
++
++ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
++ ep, &queue_dbg_fops);
++ if (!ep->debugfs_queue)
++ goto err_queue;
++
++ if (ep_can_dma(ep)) {
++ ep->debugfs_dma_status
++ = debugfs_create_u32("dma_status", 0400, ep_root,
++ &ep->last_dma_status);
++ if (!ep->debugfs_dma_status)
++ goto err_dma_status;
++ }
++
++ return;
++
++err_dma_status:
++ debugfs_remove(ep->debugfs_queue);
++err_queue:
++ debugfs_remove(ep_root);
++err_root:
++ dev_err(&ep->udc->pdev->dev,
++ "failed to create debugfs directory for %s\n", ep_name(ep));
++}
++
++static void husb2_ep_cleanup_debugfs(struct husb2_ep *ep)
++{
++ debugfs_remove(ep->debugfs_queue);
++ debugfs_remove(ep->debugfs_dma_status);
++ debugfs_remove(ep->debugfs_dir);
++ ep->debugfs_dma_status = NULL;
++ ep->debugfs_dir = NULL;
++}
++
++static void husb2_init_debugfs(struct husb2_udc *udc)
++{
++ struct dentry *root, *regs;
++ struct resource *regs_resource;
++
++ root = debugfs_create_dir(udc->gadget.name, NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ udc->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
++ CTRL_IOMEM_ID);
++ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
++ udc->debugfs_regs = regs;
++
++ husb2_ep_init_debugfs(udc, to_husb2_ep(udc->gadget.ep0));
++
++ return;
++
++err_regs:
++ debugfs_remove(root);
++err_root:
++ udc->debugfs_root = NULL;
++ dev_err(&udc->pdev->dev, "debugfs is not available\n");
++}
++
++static void husb2_cleanup_debugfs(struct husb2_udc *udc)
++{
++ husb2_ep_cleanup_debugfs(to_husb2_ep(udc->gadget.ep0));
++ debugfs_remove(udc->debugfs_regs);
++ debugfs_remove(udc->debugfs_root);
++ udc->debugfs_regs = NULL;
++ udc->debugfs_root = NULL;
++}
++#else
++static inline void husb2_ep_init_debugfs(struct husb2_udc *udc,
++ struct husb2_ep *ep)
++{
++
++}
++
++static inline void husb2_ep_cleanup_debugfs(struct husb2_ep *ep)
++{
++
++}
++
++static inline void husb2_init_debugfs(struct husb2_udc *udc)
++{
++
++}
++
++static inline void husb2_cleanup_debugfs(struct husb2_udc *udc)
++{
++
++}
++#endif
++
++static void copy_to_fifo(void __iomem *fifo, void *buf, int len)
++{
++ unsigned long tmp;
++
++ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
++ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
++ tmp = *(unsigned long *)buf;
++ if (len >= 4) {
++ DBG(DBG_FIFO, " -> %08lx\n", tmp);
++ __raw_writel(tmp, fifo);
++ } else {
++ do {
++ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
++ __raw_writeb(tmp >> 24, fifo);
++ fifo++;
++ tmp <<= 8;
++ } while (--len);
++ break;
++ }
++ }
++}
++
++static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++{
++ union {
++ unsigned long *w;
++ unsigned char *b;
++ } p;
++ unsigned long tmp;
++
++ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
++ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
++ if (len >= 4) {
++ tmp = __raw_readl(fifo);
++ *p.w = tmp;
++ DBG(DBG_FIFO, " -> %08lx\n", tmp);
++ } else {
++ do {
++ tmp = __raw_readb(fifo);
++ *p.b = tmp;
++ DBG(DBG_FIFO, " -> %02lx\n", tmp);
++ fifo++, p.b++;
++ } while (--len);
++ }
++ }
++}
++
++static void next_fifo_transaction(struct husb2_ep *ep,
++ struct husb2_request *req)
++{
++ unsigned int transaction_len;
++
++ transaction_len = req->req.length - req->req.actual;
++ req->last_transaction = 1;
++ if (transaction_len > ep->ep.maxpacket) {
++ transaction_len = ep->ep.maxpacket;
++ req->last_transaction = 0;
++ } else if (transaction_len == ep->ep.maxpacket
++ && req->req.zero) {
++ req->last_transaction = 0;
++ }
++ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
++ ep_name(ep), req, transaction_len,
++ req->last_transaction ? ", done" : "");
++
++ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
++ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
++ req->req.actual += transaction_len;
++}
++
++static void submit_request(struct husb2_ep *ep, struct husb2_request *req)
++{
++ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
++ ep_name(ep), req, req->req.length);
++
++ req->req.actual = 0;
++ req->submitted = 1;
++
++ if (req->using_dma) {
++ if (req->req.length == 0) {
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
++ } else {
++ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
++ husb2_dma_writel(ep, NXT_DSC,
++ req->packet[0].desc_dma);
++ husb2_dma_writel(ep, CONTROL, HUSB2_BIT(DMA_LINK));
++ }
++ } else {
++ next_fifo_transaction(ep, req);
++ if (req->last_transaction)
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
++ else
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
++ }
++}
++
++static void submit_next_request(struct husb2_ep *ep)
++{
++ struct husb2_request *req;
++
++ if (list_empty(&ep->queue)) {
++ husb2_ep_writel(ep, CTL_DIS, (HUSB2_BIT(TX_PK_RDY)
++ | HUSB2_BIT(RX_BK_RDY)));
++ return;
++ }
++
++ req = list_entry(ep->queue.next, struct husb2_request, queue);
++ if (!req->submitted)
++ submit_request(ep, req);
++}
++
++static void send_status(struct husb2_udc *udc, struct husb2_ep *ep)
++{
++ ep->state = STATUS_STAGE_IN;
++ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
++}
++
++static void receive_data(struct husb2_ep *ep)
++{
++ struct husb2_udc *udc = ep->udc;
++ struct husb2_request *req;
++ unsigned long status;
++ unsigned int bytecount, nr_busy;
++ int is_complete = 0;
++
++ status = husb2_ep_readl(ep, STA);
++ nr_busy = HUSB2_BFEXT(BUSY_BANKS, status);
++
++ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
++
++ while (nr_busy > 0) {
++ if (list_empty(&ep->queue)) {
++ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(RX_BK_RDY));
++ break;
++ }
++ req = list_entry(ep->queue.next,
++ struct husb2_request, queue);
++
++ bytecount = HUSB2_BFEXT(BYTE_COUNT, status);
++
++ if (status & (1 << 31))
++ is_complete = 1;
++ if (req->req.actual + bytecount >= req->req.length) {
++ is_complete = 1;
++ bytecount = req->req.length - req->req.actual;
++ }
++
++ copy_from_fifo(req->req.buf + req->req.actual,
++ ep->fifo, bytecount);
++ req->req.actual += bytecount;
++
++ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
++
++ if (is_complete) {
++ DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
++ req->req.status = 0;
++ list_del_init(&req->queue);
++ req->req.complete(&ep->ep, &req->req);
++ }
++
++ status = husb2_ep_readl(ep, STA);
++ nr_busy = HUSB2_BFEXT(BUSY_BANKS, status);
++
++ if (is_complete && ep_is_control(ep)) {
++ BUG_ON(nr_busy != 0);
++ send_status(udc, ep);
++ break;
++ }
++ }
++}
++
++static void request_complete(struct husb2_ep *ep,
++ struct husb2_request *req,
++ int status)
++{
++ struct husb2_udc *udc = ep->udc;
++ int i;
++
++ BUG_ON(!list_empty(&req->queue));
++
++ if (req->req.status == -EINPROGRESS)
++ req->req.status = status;
++
++ if (req->packet) {
++ for (i = 0; i < req->nr_pkts; i++)
++ dma_pool_free(udc->desc_pool, req->packet[i].desc,
++ req->packet[i].desc_dma);
++ kfree(req->packet);
++ req->packet = NULL;
++ dma_unmap_single(&udc->pdev->dev,
++ req->req.dma, req->req.length,
++ (ep_is_in(ep)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++ req->req.dma = DMA_ADDR_INVALID;
++ }
++
++ DBG(DBG_GADGET | DBG_REQ,
++ "%s: req %p complete: status %d, actual %u\n",
++ ep_name(ep), req, req->req.status, req->req.actual);
++ req->req.complete(&ep->ep, &req->req);
++}
++
++static void request_complete_list(struct husb2_ep *ep,
++ struct list_head *list,
++ int status)
++{
++ struct husb2_request *req, *tmp_req;
++
++ list_for_each_entry_safe(req, tmp_req, list, queue) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, status);
++ }
++}
++
++static int husb2_ep_enable(struct usb_ep *_ep,
++ const struct usb_endpoint_descriptor *desc)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ struct husb2_udc *udc = ep->udc;
++ unsigned long flags, ept_cfg, maxpacket;
++
++ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
++
++ maxpacket = le16_to_cpu(desc->wMaxPacketSize);
++
++ if (ep->index == 0
++ || desc->bDescriptorType != USB_DT_ENDPOINT
++ || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
++ != ep->index)
++ || maxpacket == 0
++ || maxpacket > ep->fifo_size) {
++ DBG(DBG_ERR, "ep_enable: Invalid argument");
++ return -EINVAL;
++ }
++
++ if (((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
++ == USB_ENDPOINT_XFER_ISOC)
++ && !(ep->capabilities & HUSB2_EP_CAP_ISOC)) {
++ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
++ ep_name(ep));
++ return -EINVAL;
++ }
++
++ if (maxpacket <= 8)
++ ept_cfg = HUSB2_BF(EPT_SIZE, HUSB2_EPT_SIZE_8);
++ else
++ /* LSB is bit 1, not 0 */
++ ept_cfg = HUSB2_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
++ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
++ ep_name(ep), ept_cfg, maxpacket);
++
++ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
++ ept_cfg |= HUSB2_BIT(EPT_DIR);
++
++ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++ case USB_ENDPOINT_XFER_CONTROL:
++ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_CONTROL);
++ break;
++ case USB_ENDPOINT_XFER_ISOC:
++ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_ISO);
++ break;
++ case USB_ENDPOINT_XFER_BULK:
++ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_BULK);
++ break;
++ case USB_ENDPOINT_XFER_INT:
++ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_INT);
++ break;
++ }
++ ept_cfg |= HUSB2_BF(BK_NUMBER, ep->nr_banks);
++
++ spin_lock_irqsave(&ep->udc->lock, flags);
++
++ if (ep->desc) {
++ spin_unlock_irqrestore(&ep->udc->lock, flags);
++ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
++ return -EBUSY;
++ }
++
++ ep->desc = desc;
++ ep->ep.maxpacket = maxpacket;
++
++ husb2_ep_writel(ep, CFG, ept_cfg);
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(EPT_ENABLE));
++
++ if (ep_can_dma(ep)) {
++ husb2_writel(udc, INT_ENB,
++ (husb2_readl(udc, INT_ENB)
++ | HUSB2_BF(EPT_INT, 1 << ep->index)
++ | HUSB2_BF(DMA_INT, 1 << ep->index)));
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(AUTO_VALID));
++ } else {
++ husb2_writel(udc, INT_ENB,
++ (husb2_readl(udc, INT_ENB)
++ | HUSB2_BF(EPT_INT, 1 << ep->index)));
++ }
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
++ (unsigned long)husb2_ep_readl(ep, CFG));
++ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
++ (unsigned long)husb2_readl(udc, INT_ENB));
++
++ husb2_ep_init_debugfs(udc, ep);
++
++ return 0;
++}
++
++static int husb2_ep_disable(struct usb_ep *_ep)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ struct husb2_udc *udc = ep->udc;
++ LIST_HEAD(req_list);
++ unsigned long flags;
++
++ DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
++
++ husb2_ep_cleanup_debugfs(ep);
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ if (!ep->desc) {
++ spin_unlock_irqrestore(&udc->lock, flags);
++ DBG(DBG_ERR, "ep_disable: %s not enabled\n",
++ ep_name(ep));
++ return -EINVAL;
++ }
++ ep->desc = NULL;
++
++ list_splice_init(&ep->queue, &req_list);
++ if (ep_can_dma(ep)) {
++ husb2_dma_writel(ep, CONTROL, 0);
++ husb2_dma_writel(ep, ADDRESS, 0);
++ husb2_dma_readl(ep, STATUS);
++ }
++ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(EPT_ENABLE));
++ husb2_writel(udc, INT_ENB, (husb2_readl(udc, INT_ENB)
++ & ~HUSB2_BF(EPT_INT, 1 << ep->index)));
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ request_complete_list(ep, &req_list, -ESHUTDOWN);
++
++ return 0;
++}
++
++static struct usb_request *
++husb2_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
++{
++ struct husb2_request *req;
++
++ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
++
++ req = kzalloc(sizeof(*req), gfp_flags);
++ if (!req)
++ return NULL;
++
++ INIT_LIST_HEAD(&req->queue);
++ req->req.dma = DMA_ADDR_INVALID;
++
++ return &req->req;
++}
++
++static void
++husb2_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++ struct husb2_request *req = to_husb2_req(_req);
++
++ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++
++ kfree(req);
++}
++
++static void *husb2_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
++ dma_addr_t *dma, unsigned gfp_flags)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ void *buf;
++
++ /*
++ * We depend on kmalloc() returning cache-aligned memory. This
++ * is normally guaranteed as long as we allocate a whole
++ * cacheline or more.
++ *
++ * When CONFIG_DEBUG_SLAB is enabled, however, the slab
++ * allocator inserts red zones and ownership information,
++ * causing the slab objects to be misaligned.
++ *
++ * One alternative would be to use dma_alloc_coherent, but
++ * that would make us unable to allocate anything less than a
++ * page at a time.
++ */
++#ifdef CONFIG_DEBUG_SLAB
++# error The HUSB2 UDC driver breaks with SLAB debugging enabled
++#endif
++
++ if (bytes < L1_CACHE_BYTES)
++ bytes = L1_CACHE_BYTES;
++
++ buf = kmalloc(bytes, gfp_flags);
++
++ /*
++ * Seems like we have to map the buffer any chance we get.
++ * ether.c wants us to initialize the dma member of a
++ * different request than the one receiving the buffer, so one
++ * never knows...
++ *
++ * Ah, screw it. The ether driver is probably wrong, and this
++ * is not the right place to do the mapping. The driver
++ * shouldn't mess with our DMA mappings anyway.
++ */
++ *dma = DMA_ADDR_INVALID;
++
++ DBG(DBG_GADGET, "ep_alloc_buffer: %s, %u, 0x%x -> %p\n",
++ ep_name(ep), bytes, gfp_flags, buf);
++
++ return buf;
++}
++
++static void husb2_ep_free_buffer(struct usb_ep *_ep, void *buf,
++ dma_addr_t dma, unsigned bytes)
++{
++ DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
++ _ep->name, buf, bytes);
++ kfree(buf);
++}
++
++static int queue_dma(struct husb2_udc *udc, struct husb2_ep *ep,
++ struct husb2_request *req, unsigned int direction,
++ gfp_t gfp_flags)
++{
++ struct husb2_packet *pkt, *prev_pkt;
++ unsigned int pkt_size, nr_pkts, i;
++ unsigned int residue;
++ dma_addr_t addr;
++ unsigned long flags;
++ u32 ctrl;
++
++ req->using_dma = 1;
++
++ if (req->req.length == 0) {
++ if (!req->req.zero)
++ return -EINVAL;
++ req->send_zlp = 1;
++
++ spin_lock_irqsave(&udc->lock, flags);
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
++ list_add_tail(&req->queue, &ep->queue);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++ }
++
++ if (req->req.dma == DMA_ADDR_INVALID)
++ req->req.dma = dma_map_single(&udc->pdev->dev,
++ req->req.buf,
++ req->req.length,
++ direction);
++ else
++ dma_sync_single_for_device(&udc->pdev->dev,
++ req->req.dma,
++ req->req.length,
++ direction);
++
++ pkt_size = ep->ep.maxpacket;
++ nr_pkts = req->req.length / pkt_size;
++ residue = req->req.length % pkt_size;
++ if (residue != 0)
++ nr_pkts++;
++ else if (req->req.zero && ep_is_in(ep))
++ /* ensure last packet is short */
++ req->send_zlp = 1;
++
++ req->nr_pkts = nr_pkts;
++
++ req->packet = kzalloc(sizeof(*req->packet) * nr_pkts, gfp_flags);
++ if (!req->packet)
++ goto out_of_memory;
++
++ addr = req->req.dma;
++ ctrl = (HUSB2_BF(DMA_BUF_LEN, pkt_size)
++ | HUSB2_BIT(DMA_CH_EN) | HUSB2_BIT(DMA_LINK)
++ | HUSB2_BIT(DMA_END_TR_EN) | HUSB2_BIT(DMA_END_TR_IE));
++ prev_pkt = NULL;
++ pkt = NULL;
++ DBG(DBG_DMA, "DMA descriptors:\n");
++ for (i = 0; i < nr_pkts; i++) {
++ pkt = &req->packet[i];
++ pkt->desc = dma_pool_alloc(udc->desc_pool, gfp_flags,
++ &pkt->desc_dma);
++ if (!pkt->desc)
++ goto out_of_memory;
++
++ if (prev_pkt) {
++ prev_pkt->desc->next = pkt->desc_dma;
++ DBG(DBG_DMA, "[%d] n%08x a%08x c%08x\n",
++ i - 1, prev_pkt->desc->next, prev_pkt->desc->addr,
++ prev_pkt->desc->ctrl);
++ }
++ prev_pkt = pkt;
++
++ pkt->desc->addr = addr;
++ pkt->desc->ctrl = ctrl;
++ addr += pkt_size;
++ }
++
++ /* special care is needed for the last packet... */
++ ctrl = (HUSB2_BIT(DMA_CH_EN)
++ | HUSB2_BIT(DMA_END_TR_EN) | HUSB2_BIT(DMA_END_TR_IE)
++ | HUSB2_BIT(DMA_END_BUF_IE));
++ if (ep_is_in(ep))
++ ctrl |= HUSB2_BIT(DMA_END_BUF_EN);
++ if (req->req.zero || residue)
++ ctrl |= HUSB2_BF(DMA_BUF_LEN, residue);
++ else
++ ctrl |= HUSB2_BF(DMA_BUF_LEN, pkt_size);
++ pkt->desc->ctrl = ctrl;
++
++ DBG(DBG_DMA, "[%d] n%08x a%08x c%08x\n",
++ i - 1, prev_pkt->desc->next, prev_pkt->desc->addr,
++ prev_pkt->desc->ctrl);
++
++ /* Add this request to the queue and try to chain the DMA descriptors */
++ spin_lock_irqsave(&udc->lock, flags);
++
++ /* If the DMA controller is idle, start it */
++ if (list_empty(&ep->queue)) {
++ husb2_dma_writel(ep, NXT_DSC, req->packet[0].desc_dma);
++ husb2_dma_writel(ep, CONTROL, HUSB2_BIT(DMA_LINK));
++ }
++
++ list_add_tail(&req->queue, &ep->queue);
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++
++out_of_memory:
++ printk(KERN_ERR "ERROR: Could not allocate DMA memory for endpoint %s\n",
++ ep_name(ep));
++ if (req->packet) {
++ for (i = 0; i < nr_pkts; i++)
++ if (req->packet[i].desc)
++ dma_pool_free(udc->desc_pool,
++ req->packet[i].desc,
++ req->packet[i].desc_dma);
++ kfree(req->packet);
++ }
++
++ return -ENOMEM;
++}
++
++static int husb2_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
++ gfp_t gfp_flags)
++{
++ struct husb2_request *req = to_husb2_req(_req);
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ struct husb2_udc *udc = ep->udc;
++ unsigned long flags;
++ int direction_in = 0;
++
++ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
++ "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
++
++ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
++ return -ESHUTDOWN;
++ if (!ep->desc)
++ return -ENODEV;
++
++ req->nr_pkts = 0;
++ req->submitted = 0;
++ req->using_dma = 0;
++ req->last_transaction = 0;
++ req->send_zlp = 0;
++
++ BUG_ON(req->packet);
++
++ if (ep_is_in(ep)
++ || (ep_is_control(ep) && (ep->state == DATA_STAGE_IN
++ || ep->state == STATUS_STAGE_IN)))
++ direction_in = 1;
++
++ _req->status = -EINPROGRESS;
++ _req->actual = 0;
++
++ if (ep_can_dma(ep)) {
++ return queue_dma(udc, ep, req, (direction_in
++ ? DMA_TO_DEVICE
++ : DMA_FROM_DEVICE),
++ gfp_flags);
++ } else {
++ spin_lock_irqsave(&udc->lock, flags);
++ list_add_tail(&req->queue, &ep->queue);
++
++ if (direction_in)
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
++ else
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(RX_BK_RDY));
++ spin_unlock_irqrestore(&udc->lock, flags);
++ }
++
++ return 0;
++}
++
++static void husb2_update_req(struct husb2_ep *ep, struct husb2_request *req,
++ u32 status)
++{
++ struct husb2_dma_desc *desc;
++ dma_addr_t from;
++ dma_addr_t addr;
++ size_t size;
++ unsigned int i;
++
++ addr = husb2_dma_readl(ep, ADDRESS);
++ req->req.actual = 0;
++
++ for (i = 0; i < req->nr_pkts; i++) {
++ desc = req->packet[i].desc;
++ from = desc->addr;
++ size = HUSB2_BFEXT(DMA_BUF_LEN, desc->ctrl);
++
++ req->req.actual += size;
++
++ DBG(DBG_DMA, " from=%#08x, size=%#zx\n", from, size);
++
++ if (from <= addr && (from + size) >= addr)
++ break;
++ }
++
++ req->req.actual -= HUSB2_BFEXT(DMA_BUF_LEN, status);
++}
++
++static int stop_dma(struct husb2_ep *ep, u32 *pstatus)
++{
++ unsigned int timeout;
++ u32 status;
++
++ /*
++ * Stop the DMA controller. When writing both CH_EN
++ * and LINK to 0, the other bits are not affected.
++ */
++ husb2_dma_writel(ep, CONTROL, 0);
++
++ /* Wait for the FIFO to empty */
++ for (timeout = 40; timeout; --timeout) {
++ status = husb2_dma_readl(ep, STATUS);
++ if (!(status & HUSB2_BIT(DMA_CH_EN)))
++ break;
++ udelay(1);
++ }
++
++ if (pstatus)
++ *pstatus = status;
++
++ if (timeout == 0) {
++ dev_err(&ep->udc->pdev->dev,
++ "%s: timed out waiting for DMA FIFO to empty\n",
++ ep_name(ep));
++ return -ETIMEDOUT;
++ }
++
++ return 0;
++}
++
++static int husb2_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ struct husb2_udc *udc = ep->udc;
++ struct husb2_request *req = to_husb2_req(_req);
++ unsigned long flags;
++ u32 status;
++
++ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", ep_name(ep), req);
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ if (req->using_dma) {
++ /*
++ * If this request is currently being transferred,
++ * stop the DMA controller and reset the FIFO.
++ */
++ if (ep->queue.next == &req->queue) {
++ status = husb2_dma_readl(ep, STATUS);
++ if (status & HUSB2_BIT(DMA_CH_EN))
++ stop_dma(ep, &status);
++
++#ifdef CONFIG_DEBUG_FS
++ ep->last_dma_status = status;
++#endif
++
++ husb2_writel(udc, EPT_RST,
++ 1 << ep_index(ep));
++
++ husb2_update_req(ep, req, status);
++ }
++ }
++
++ /*
++ * Errors should stop the queue from advancing until the
++ * completion function returns.
++ */
++ list_del_init(&req->queue);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ request_complete(ep, req, -ECONNRESET);
++
++ /* Process the next request if any */
++ spin_lock_irqsave(&udc->lock, flags);
++ submit_next_request(ep);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++}
++
++static int husb2_ep_set_halt(struct usb_ep *_ep, int value)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ struct husb2_udc *udc = ep->udc;
++ unsigned long flags;
++ int ret = 0;
++
++ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
++ value ? "set" : "clear");
++
++ if (!ep->desc) {
++ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
++ ep_name(ep));
++ return -ENODEV;
++ }
++ if (ep_is_isochronous(ep)) {
++ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
++ ep_name(ep));
++ return -ENOTTY;
++ }
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ /*
++ * We can't halt IN endpoints while there are still data to be
++ * transferred
++ */
++ if (!list_empty(&ep->queue)
++ || ((value && ep_is_in(ep)
++ && (husb2_ep_readl(ep, STA)
++ & HUSB2_BF(BUSY_BANKS, -1L))))) {
++ ret = -EAGAIN;
++ } else {
++ if (value)
++ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(FORCE_STALL));
++ else
++ husb2_ep_writel(ep, CLR_STA, (HUSB2_BIT(FORCE_STALL)
++ | HUSB2_BIT(TOGGLE_SEQ)));
++ husb2_ep_readl(ep, STA);
++ }
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return ret;
++}
++
++static int husb2_ep_fifo_status(struct usb_ep *_ep)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++
++ return HUSB2_BFEXT(BYTE_COUNT, husb2_ep_readl(ep, STA));
++}
++
++static void husb2_ep_fifo_flush(struct usb_ep *_ep)
++{
++ struct husb2_ep *ep = to_husb2_ep(_ep);
++ struct husb2_udc *udc = ep->udc;
++
++ husb2_writel(udc, EPT_RST, 1 << ep->index);
++}
++
++struct usb_ep_ops husb2_ep_ops = {
++ .enable = husb2_ep_enable,
++ .disable = husb2_ep_disable,
++ .alloc_request = husb2_ep_alloc_request,
++ .free_request = husb2_ep_free_request,
++ .alloc_buffer = husb2_ep_alloc_buffer,
++ .free_buffer = husb2_ep_free_buffer,
++ .queue = husb2_ep_queue,
++ .dequeue = husb2_ep_dequeue,
++ .set_halt = husb2_ep_set_halt,
++ .fifo_status = husb2_ep_fifo_status,
++ .fifo_flush = husb2_ep_fifo_flush,
++};
++
++static int husb2_udc_get_frame(struct usb_gadget *gadget)
++{
++ struct husb2_udc *udc = to_husb2_udc(gadget);
++
++ return HUSB2_BFEXT(FRAME_NUMBER, husb2_readl(udc, FNUM));
++}
++
++struct usb_gadget_ops husb2_udc_ops = {
++ .get_frame = husb2_udc_get_frame,
++};
++
++#define EP(nam, type, idx, caps) { \
++ .ep = { \
++ .ops = &husb2_ep_ops, \
++ .name = nam, \
++ .maxpacket = type##_FIFO_SIZE, \
++ }, \
++ .udc = &the_udc, \
++ .queue = LIST_HEAD_INIT(husb2_ep[idx].queue), \
++ .fifo_size = type##_FIFO_SIZE, \
++ .nr_banks = type##_NR_BANKS, \
++ .index = idx, \
++ .capabilities = caps, \
++}
++
++static struct husb2_ep husb2_ep[] = {
++ EP("ep0", EP0, 0, 0),
++ EP("ep1in-bulk", BULK, 1, HUSB2_EP_CAP_DMA),
++ EP("ep2out-bulk", BULK, 2, HUSB2_EP_CAP_DMA),
++ EP("ep3in-iso", ISO, 3, HUSB2_EP_CAP_DMA | HUSB2_EP_CAP_ISOC),
++ EP("ep4out-iso", ISO, 4, HUSB2_EP_CAP_DMA | HUSB2_EP_CAP_ISOC),
++ EP("ep5in-int", INT, 5, HUSB2_EP_CAP_DMA),
++ EP("ep6out-int", INT, 6, HUSB2_EP_CAP_DMA),
++};
++#undef EP
++
++static struct usb_endpoint_descriptor husb2_ep0_desc = {
++ .bLength = USB_DT_ENDPOINT_SIZE,
++ .bDescriptorType = USB_DT_ENDPOINT,
++ .bEndpointAddress = 0,
++ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
++ .wMaxPacketSize = __constant_cpu_to_le16(64),
++ /* FIXME: I have no idea what to put here */
++ .bInterval = 1,
++};
++
++static void nop_release(struct device *dev)
++{
++
++}
++
++static struct husb2_udc the_udc = {
++ .gadget = {
++ .ops = &husb2_udc_ops,
++ .ep0 = &husb2_ep[0].ep,
++ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
++ .is_dualspeed = 1,
++ .name = "husb2_udc",
++ .dev = {
++ .bus_id = "gadget",
++ .release = nop_release,
++ },
++ },
++
++ .lock = SPIN_LOCK_UNLOCKED,
++};
++
++static void udc_enable(struct husb2_udc *udc)
++{
++ struct husb2_ep *ep0 = &husb2_ep[0];
++
++ /* Enable the controller */
++ husb2_writel(udc, CTRL, HUSB2_BIT(EN_HUSB2));
++
++ /* Reset all endpoints and enable basic interrupts */
++ husb2_writel(udc, EPT_RST, ~0UL);
++ husb2_writel(udc, INT_ENB, (HUSB2_BIT(DET_SUSPEND)
++ | HUSB2_BIT(END_OF_RESET)
++ | HUSB2_BIT(END_OF_RESUME)));
++
++ /* Configure endpoint 0 */
++ ep0->desc = &husb2_ep0_desc;
++
++ husb2_writel(udc, EPT_RST, 1 << 0);
++ husb2_ep_writel(ep0, CTL_ENB, HUSB2_BIT(EPT_ENABLE));
++ husb2_ep_writel(ep0, CFG, (HUSB2_BF(EPT_SIZE, EP0_EPT_SIZE)
++ | HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_CONTROL)
++ | HUSB2_BF(BK_NUMBER, HUSB2_BK_NUMBER_ONE)));
++
++ husb2_ep_writel(ep0, CTL_ENB, HUSB2_BIT(RX_SETUP));
++ husb2_writel(udc, INT_ENB, (husb2_readl(udc, INT_ENB)
++ | HUSB2_BF(EPT_INT, 1)));
++
++ if (!(husb2_ep_readl(ep0, CFG) & HUSB2_BIT(EPT_MAPPED)))
++ dev_warn(&udc->pdev->dev,
++ "WARNING: EP0 configuration is invalid!\n");
++}
++
++static void udc_disable(struct husb2_udc *udc)
++{
++ udc->gadget.speed = USB_SPEED_UNKNOWN;
++
++ husb2_writel(udc, CTRL, 0);
++}
++
++/*
++ * Called with interrupts disabled and udc->lock held.
++ */
++static void reset_all_endpoints(struct husb2_udc *udc)
++{
++ struct husb2_ep *ep;
++ struct husb2_request *req, *tmp_req;
++
++ husb2_writel(udc, EPT_RST, ~0UL);
++
++ ep = to_husb2_ep(udc->gadget.ep0);
++ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, -ECONNRESET);
++ }
++ BUG_ON(!list_empty(&ep->queue));
++
++ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
++ if (ep->desc)
++ husb2_ep_disable(&ep->ep);
++ }
++}
++
++static struct husb2_ep *get_ep_by_addr(struct husb2_udc *udc, u16 wIndex)
++{
++ struct husb2_ep *ep;
++
++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++ return to_husb2_ep(udc->gadget.ep0);
++
++ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
++ u8 bEndpointAddress;
++
++ if (!ep->desc)
++ continue;
++ bEndpointAddress = ep->desc->bEndpointAddress;
++ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
++ continue;
++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
++ == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
++ return ep;
++ }
++
++ return NULL;
++}
++
++/* Called with interrupts disabled and udc->lock held */
++static inline void set_protocol_stall(struct husb2_udc *udc,
++ struct husb2_ep *ep)
++{
++ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(FORCE_STALL));
++ ep->state = WAIT_FOR_SETUP;
++}
++
++static inline int is_stalled(struct husb2_udc *udc, struct husb2_ep *ep)
++{
++ if (husb2_ep_readl(ep, STA) & HUSB2_BIT(FORCE_STALL))
++ return 1;
++ return 0;
++}
++
++static inline void set_address(struct husb2_udc *udc, unsigned int addr)
++{
++ u32 regval;
++
++ DBG(DBG_BUS, "setting address %u...\n", addr);
++ regval = husb2_readl(udc, CTRL);
++ regval = HUSB2_BFINS(DEV_ADDR, addr, regval);
++ husb2_writel(udc, CTRL, regval);
++}
++
++static int handle_ep0_setup(struct husb2_udc *udc, struct husb2_ep *ep,
++ struct usb_ctrlrequest *crq)
++{
++ switch (crq->bRequest) {
++ case USB_REQ_GET_STATUS: {
++ u16 status;
++
++ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
++ /* Self-powered, no remote wakeup */
++ status = __constant_cpu_to_le16(1 << 0);
++ } else if (crq->bRequestType
++ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
++ status = __constant_cpu_to_le16(0);
++ } else if (crq->bRequestType
++ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
++ struct husb2_ep *target;
++
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ status = 0;
++ if (is_stalled(udc, target))
++ status |= __constant_cpu_to_le16(1);
++ } else {
++ goto delegate;
++ }
++
++ /* Write directly to the FIFO. No queueing is done. */
++ if(crq->wLength != __constant_cpu_to_le16(sizeof(status)))
++ goto stall;
++ ep->state = DATA_STAGE_IN;
++ __raw_writew(status, ep->fifo);
++ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
++ break;
++ }
++
++ case USB_REQ_CLEAR_FEATURE: {
++ if (crq->bRequestType == USB_RECIP_DEVICE) {
++ /* We don't support TEST_MODE */
++ goto stall;
++ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++ struct husb2_ep *target;
++
++ if (crq->wValue != __constant_cpu_to_le16(USB_ENDPOINT_HALT)
++ || crq->wLength != __constant_cpu_to_le16(0))
++ goto stall;
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ husb2_ep_writel(target, CLR_STA, (HUSB2_BIT(FORCE_STALL)
++ | HUSB2_BIT(TOGGLE_SEQ)));
++ } else {
++ goto delegate;
++ }
++
++ send_status(udc, ep);
++ break;
++ }
++
++ case USB_REQ_SET_FEATURE: {
++ if (crq->bRequestType == USB_RECIP_DEVICE) {
++ /* We don't support TEST_MODE */
++ goto stall;
++ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++ struct husb2_ep *target;
++
++ if (crq->wValue != __constant_cpu_to_le16(USB_ENDPOINT_HALT)
++ || crq->wLength != __constant_cpu_to_le16(0))
++ goto stall;
++
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ husb2_ep_writel(target, SET_STA, HUSB2_BIT(FORCE_STALL));
++ } else
++ goto delegate;
++
++ send_status(udc, ep);
++ break;
++ }
++
++ case USB_REQ_SET_ADDRESS:
++ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
++ goto delegate;
++
++ set_address(udc, le16_to_cpu(crq->wValue));
++ send_status(udc, ep);
++ ep->state = STATUS_STAGE_ADDR;
++ break;
++
++ default:
++ delegate:
++ return udc->driver->setup(&udc->gadget, crq);
++ }
++
++ return 0;
++
++stall:
++ printk(KERN_ERR
++ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
++ "halting endpoint...\n",
++ ep_name(ep), crq->bRequestType, crq->bRequest,
++ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
++ le16_to_cpu(crq->wLength));
++ set_protocol_stall(udc, ep);
++ return -1;
++}
++
++static void husb2_control_irq(struct husb2_udc *udc, struct husb2_ep *ep)
++{
++ struct husb2_request *req;
++ u32 epstatus;
++ u32 epctrl;
++
++restart:
++ epstatus = husb2_ep_readl(ep, STA);
++ epctrl = husb2_ep_readl(ep, CTL);
++
++ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
++ ep_name(ep), epstatus);
++
++ req = NULL;
++ if (!list_empty(&ep->queue))
++ req = list_entry(ep->queue.next,
++ struct husb2_request, queue);
++
++ if ((epctrl & HUSB2_BIT(TX_PK_RDY))
++ && !(epstatus & HUSB2_BIT(TX_PK_RDY))) {
++ DBG(DBG_BUS, "tx pk rdy: %d\n", ep->state);
++
++ if (req->submitted)
++ next_fifo_transaction(ep, req);
++ else
++ submit_request(ep, req);
++
++ if (req->last_transaction) {
++ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
++ }
++ goto restart;
++ }
++ if ((epstatus & epctrl) & HUSB2_BIT(TX_COMPLETE)) {
++ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(TX_COMPLETE));
++ DBG(DBG_BUS, "txc: %d\n", ep->state);
++
++ switch (ep->state) {
++ case DATA_STAGE_IN:
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(RX_BK_RDY));
++ husb2_ep_writel(ep, CTL_DIS,
++ HUSB2_BIT(TX_COMPLETE));
++ ep->state = STATUS_STAGE_OUT;
++ break;
++ case STATUS_STAGE_ADDR:
++ /* Activate our new address */
++ husb2_writel(udc, CTRL, (husb2_readl(udc, CTRL)
++ | HUSB2_BIT(FADDR_EN)));
++ husb2_ep_writel(ep, CTL_DIS,
++ HUSB2_BIT(TX_COMPLETE));
++ ep->state = WAIT_FOR_SETUP;
++ break;
++ case STATUS_STAGE_IN:
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, 0);
++ submit_next_request(ep);
++ }
++ BUG_ON(!list_empty(&ep->queue));
++ husb2_ep_writel(ep, CTL_DIS,
++ HUSB2_BIT(TX_COMPLETE));
++ ep->state = WAIT_FOR_SETUP;
++ break;
++ default:
++ printk(KERN_ERR
++ "udc: %s: TXCOMP: Invalid endpoint state %d, "
++ "halting endpoint...\n",
++ ep_name(ep), ep->state);
++ set_protocol_stall(udc, ep);
++ break;
++ }
++
++ goto restart;
++ }
++ if ((epstatus & epctrl) & HUSB2_BIT(RX_BK_RDY)) {
++ DBG(DBG_BUS, "rxc: %d\n", ep->state);
++
++ switch (ep->state) {
++ case STATUS_STAGE_OUT:
++ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
++
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, 0);
++ }
++ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(RX_BK_RDY));
++ ep->state = WAIT_FOR_SETUP;
++ break;
++
++ case DATA_STAGE_OUT:
++ receive_data(ep);
++ break;
++
++ default:
++ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
++ set_protocol_stall(udc, ep);
++ printk(KERN_ERR
++ "udc: %s: RXRDY: Invalid endpoint state %d, "
++ "halting endpoint...\n",
++ ep_name(ep), ep->state);
++ break;
++ }
++
++ goto restart;
++ }
++ if (epstatus & HUSB2_BIT(RX_SETUP)) {
++ union {
++ struct usb_ctrlrequest crq;
++ unsigned long data[2];
++ } crq;
++ unsigned int pkt_len;
++ int ret;
++
++ if (ep->state != WAIT_FOR_SETUP) {
++ /*
++ * Didn't expect a SETUP packet at this
++ * point. Clean up any pending requests (which
++ * may be successful).
++ */
++ int status = -EPROTO;
++
++ /*
++ * RXRDY is dropped when SETUP packets arrive.
++ * Just pretend we received the status packet.
++ */
++ if (ep->state == STATUS_STAGE_OUT)
++ status = 0;
++
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, status);
++ }
++ BUG_ON(!list_empty(&ep->queue));
++ }
++
++ pkt_len = HUSB2_BFEXT(BYTE_COUNT, husb2_ep_readl(ep, STA));
++ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
++ BUG_ON(pkt_len != sizeof(crq));
++
++ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
++ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++
++ /* Free up one bank in the FIFO so that we can
++ * generate or receive a reply right away. */
++ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_SETUP));
++
++ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
++ ep->state, crq.crq.bRequestType,
++ crq.crq.bRequest); */
++
++ if (crq.crq.bRequestType & USB_DIR_IN) {
++ /*
++ * The USB 2.0 spec states that "if wLength is
++ * zero, there is no data transfer phase."
++ * However, testusb #14 seems to actually
++ * expect a data phase even if wLength = 0...
++ */
++ ep->state = DATA_STAGE_IN;
++ } else {
++ if (crq.crq.wLength != __constant_cpu_to_le16(0))
++ ep->state = DATA_STAGE_OUT;
++ else
++ ep->state = STATUS_STAGE_IN;
++ }
++
++ ret = -1;
++ if (ep->index == 0)
++ ret = handle_ep0_setup(udc, ep, &crq.crq);
++ else
++ ret = udc->driver->setup(&udc->gadget, &crq.crq);
++
++ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
++ crq.crq.bRequestType, crq.crq.bRequest,
++ le16_to_cpu(crq.crq.wLength), ep->state, ret);
++
++ if (ret < 0) {
++ /* Let the host know that we failed */
++ set_protocol_stall(udc, ep);
++ }
++ }
++}
++
++static void husb2_ep_irq(struct husb2_udc *udc, struct husb2_ep *ep)
++{
++ struct husb2_request *req;
++ u32 epstatus;
++ u32 epctrl;
++
++ epstatus = husb2_ep_readl(ep, STA);
++ epctrl = husb2_ep_readl(ep, CTL);
++
++ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
++ ep_name(ep), epstatus);
++
++ while ((epctrl & HUSB2_BIT(TX_PK_RDY))
++ && !(epstatus & HUSB2_BIT(TX_PK_RDY))) {
++ BUG_ON(!ep_is_in(ep));
++
++ DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
++
++ if (list_empty(&ep->queue)) {
++ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
++ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
++ return;
++ }
++
++ req = list_entry(ep->queue.next, struct husb2_request, queue);
++
++ if (req->using_dma) {
++ BUG_ON(!req->send_zlp);
++
++ /* Send a zero-length packet */
++ husb2_ep_writel(ep, SET_STA,
++ HUSB2_BIT(TX_PK_RDY));
++ husb2_ep_writel(ep, CTL_DIS,
++ HUSB2_BIT(TX_PK_RDY));
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ } else {
++ if (req->submitted)
++ next_fifo_transaction(ep, req);
++ else
++ submit_request(ep, req);
++
++ if (req->last_transaction) {
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ }
++ }
++
++ epstatus = husb2_ep_readl(ep, STA);
++ epctrl = husb2_ep_readl(ep, CTL);
++ }
++ if ((epstatus & epctrl) & HUSB2_BIT(RX_BK_RDY)) {
++ BUG_ON(ep_is_in(ep));
++
++ DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
++ receive_data(ep);
++ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
++ }
++}
++
++static void husb2_dma_irq(struct husb2_udc *udc, struct husb2_ep *ep)
++{
++ struct husb2_request *req;
++ u32 status, control, pending;
++
++ status = husb2_dma_readl(ep, STATUS);
++ control = husb2_dma_readl(ep, CONTROL);
++#ifdef CONFIG_DEBUG_FS
++ ep->last_dma_status = status;
++#endif
++ pending = status & control;
++ DBG(DBG_INT, "dma irq, status=%#08x, pending=%#08x, control=%#08x\n",
++ status, pending, control);
++
++ BUG_ON(status & HUSB2_BIT(DMA_CH_EN));
++
++ if (list_empty(&ep->queue))
++ /* Might happen if a reset comes along at the right moment */
++ return;
++
++ if (pending & (HUSB2_BIT(DMA_END_TR_ST) | HUSB2_BIT(DMA_END_BUF_ST))) {
++ req = list_entry(ep->queue.next, struct husb2_request, queue);
++ husb2_update_req(ep, req, status);
++
++ if (req->send_zlp) {
++ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
++ } else {
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ }
++ }
++}
++
++static irqreturn_t husb2_udc_irq(int irq, void *devid)
++{
++ struct husb2_udc *udc = devid;
++ u32 status;
++ u32 dma_status;
++ u32 ep_status;
++
++ spin_lock(&udc->lock);
++
++ status = husb2_readl(udc, INT_STA);
++ DBG(DBG_INT, "irq, status=%#08x\n", status);
++
++ if (status & HUSB2_BIT(DET_SUSPEND)) {
++ husb2_writel(udc, INT_CLR, HUSB2_BIT(DET_SUSPEND));
++ //DBG(DBG_BUS, "Suspend detected\n");
++ if (udc->gadget.speed != USB_SPEED_UNKNOWN
++ && udc->driver && udc->driver->suspend)
++ udc->driver->suspend(&udc->gadget);
++ }
++
++ if (status & HUSB2_BIT(WAKE_UP)) {
++ husb2_writel(udc, INT_CLR, HUSB2_BIT(WAKE_UP));
++ //DBG(DBG_BUS, "Wake Up CPU detected\n");
++ }
++
++ if (status & HUSB2_BIT(END_OF_RESUME)) {
++ husb2_writel(udc, INT_CLR, HUSB2_BIT(END_OF_RESUME));
++ DBG(DBG_BUS, "Resume detected\n");
++ if (udc->gadget.speed != USB_SPEED_UNKNOWN
++ && udc->driver && udc->driver->resume)
++ udc->driver->resume(&udc->gadget);
++ }
++
++ dma_status = HUSB2_BFEXT(DMA_INT, status);
++ if (dma_status) {
++ int i;
++
++ for (i = 1; i < HUSB2_NR_ENDPOINTS; i++)
++ if (dma_status & (1 << i))
++ husb2_dma_irq(udc, &husb2_ep[i]);
++ }
++
++ ep_status = HUSB2_BFEXT(EPT_INT, status);
++ if (ep_status) {
++ int i;
++
++ for (i = 0; i < HUSB2_NR_ENDPOINTS; i++)
++ if (ep_status & (1 << i)) {
++ if (ep_is_control(&husb2_ep[i]))
++ husb2_control_irq(udc, &husb2_ep[i]);
++ else
++ husb2_ep_irq(udc, &husb2_ep[i]);
++ }
++ }
++
++ if (status & HUSB2_BIT(END_OF_RESET)) {
++ husb2_writel(udc, INT_CLR, HUSB2_BIT(END_OF_RESET));
++ if (status & HUSB2_BIT(HIGH_SPEED)) {
++ DBG(DBG_BUS, "High-speed bus reset detected\n");
++ udc->gadget.speed = USB_SPEED_HIGH;
++ } else {
++ DBG(DBG_BUS, "Full-speed bus reset detected\n");
++ udc->gadget.speed = USB_SPEED_FULL;
++ }
++ /* Better start from scratch... */
++ reset_all_endpoints(udc);
++ husb2_ep[0].state = WAIT_FOR_SETUP;
++ udc_enable(udc);
++ }
++
++ spin_unlock(&udc->lock);
++
++ return IRQ_HANDLED;
++}
++
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++ struct husb2_udc *udc = &the_udc;
++ int ret;
++
++ spin_lock(&udc->lock);
++
++ ret = -ENODEV;
++ if (!udc->pdev)
++ goto out;
++ ret = -EBUSY;
++ if (udc->driver)
++ goto out;
++
++ udc->driver = driver;
++ udc->gadget.dev.driver = &driver->driver;
++
++ device_add(&udc->gadget.dev);
++ ret = driver->bind(&udc->gadget);
++ if (ret) {
++ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
++ driver->driver.name, ret);
++ device_del(&udc->gadget.dev);
++
++ udc->driver = NULL;
++ udc->gadget.dev.driver = NULL;
++ goto out;
++ }
++
++ /* TODO: Create sysfs files */
++
++ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
++ udc_enable(udc);
++
++out:
++ spin_unlock(&udc->lock);
++ return ret;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++ struct husb2_udc *udc = &the_udc;
++ int ret;
++
++ spin_lock(&udc->lock);
++
++ ret = -ENODEV;
++ if (!udc->pdev)
++ goto out;
++ ret = -EINVAL;
++ if (driver != udc->driver)
++ goto out;
++
++ local_irq_disable();
++ udc_disable(udc);
++ local_irq_enable();
++
++ driver->unbind(&udc->gadget);
++ udc->driver = NULL;
++
++ device_del(&udc->gadget.dev);
++
++ /* TODO: Remove sysfs files */
++
++ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
++
++out:
++ spin_unlock(&udc->lock);
++ return ret;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++static int __devinit husb2_udc_probe(struct platform_device *pdev)
++{
++ struct resource *regs, *fifo;
++ struct clk *pclk, *hclk;
++ struct husb2_udc *udc = &the_udc;
++ int irq, ret, i;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
++ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
++ if (!regs || !fifo)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(hclk)) {
++ ret = PTR_ERR(hclk);
++ goto out_put_pclk;
++ }
++
++ clk_enable(pclk);
++ clk_enable(hclk);
++
++ udc->pdev = pdev;
++ udc->pclk = pclk;
++ udc->hclk = hclk;
++
++ ret = -ENOMEM;
++ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!udc->regs) {
++ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
++ goto out_disable_clocks;
++ }
++ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
++ (unsigned long)regs->start, udc->regs);
++ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
++ if (!udc->fifo) {
++ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
++ goto out_unmap_regs;
++ }
++ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
++ (unsigned long)fifo->start, udc->fifo);
++
++ device_initialize(&udc->gadget.dev);
++ udc->gadget.dev.parent = &pdev->dev;
++ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++ /* The 3-word descriptors must be 4-word aligned... */
++ udc->desc_pool = dma_pool_create("husb2-desc", &pdev->dev,
++ sizeof(struct husb2_dma_desc),
++ 16, 0);
++ if (!udc->desc_pool) {
++ dev_err(&pdev->dev, "Cannot create descriptor DMA pool\n");
++ goto out_unmap_fifo;
++ }
++
++ platform_set_drvdata(pdev, udc);
++
++ udc_disable(udc);
++
++ INIT_LIST_HEAD(&husb2_ep[0].ep.ep_list);
++ husb2_ep[0].ep_regs = udc->regs + HUSB2_EPT_BASE(0);
++ husb2_ep[0].dma_regs = udc->regs + HUSB2_DMA_BASE(0);
++ husb2_ep[0].fifo = udc->fifo + HUSB2_FIFO_BASE(0);
++ for (i = 1; i < ARRAY_SIZE(husb2_ep); i++) {
++ struct husb2_ep *ep = &husb2_ep[i];
++
++ ep->ep_regs = udc->regs + HUSB2_EPT_BASE(i);
++ ep->dma_regs = udc->regs + HUSB2_DMA_BASE(i);
++ ep->fifo = udc->fifo + HUSB2_FIFO_BASE(i);
++
++ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++ }
++
++ ret = request_irq(irq, husb2_udc_irq, SA_SAMPLE_RANDOM,
++ "husb2_udc", udc);
++ if (ret) {
++ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
++ irq, ret);
++ goto out_free_pool;
++ }
++ udc->irq = irq;
++
++ husb2_init_debugfs(udc);
++
++ return 0;
++
++out_free_pool:
++ dma_pool_destroy(udc->desc_pool);
++out_unmap_fifo:
++ iounmap(udc->fifo);
++out_unmap_regs:
++ iounmap(udc->regs);
++out_disable_clocks:
++ clk_disable(hclk);
++ clk_disable(pclk);
++ clk_put(hclk);
++out_put_pclk:
++ clk_put(pclk);
++
++ platform_set_drvdata(pdev, NULL);
++
++ return ret;
++}
++
++static int __devexit husb2_udc_remove(struct platform_device *pdev)
++{
++ struct husb2_udc *udc;
++
++ udc = platform_get_drvdata(pdev);
++ if (!udc)
++ return 0;
++
++ husb2_cleanup_debugfs(udc);
++
++ free_irq(udc->irq, udc);
++ dma_pool_destroy(udc->desc_pool);
++ iounmap(udc->fifo);
++ iounmap(udc->regs);
++ clk_disable(udc->hclk);
++ clk_disable(udc->pclk);
++ clk_put(udc->hclk);
++ clk_put(udc->pclk);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver udc_driver = {
++ .probe = husb2_udc_probe,
++ .remove = __devexit_p(husb2_udc_remove),
++ .driver = {
++ .name = "usba",
++ },
++};
++
++static int __init udc_init(void)
++{
++ printk(KERN_INFO "husb2device: Driver version %s\n", DRIVER_VERSION);
++ return platform_driver_register(&udc_driver);
++}
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++ platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("Atmel HUSB2 Device Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.h linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.h
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,406 @@
++/*
++ * Driver for the Atmel HUSB2device high speed USB device controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LINUX_USB_GADGET_HUSB2_UDC_H__
++#define __LINUX_USB_GADGET_HUSB2_UDC_H__
++
++/* USB register offsets */
++#define HUSB2_CTRL 0x0000
++#define HUSB2_FNUM 0x0004
++#define HUSB2_INT_ENB 0x0010
++#define HUSB2_INT_STA 0x0014
++#define HUSB2_INT_CLR 0x0018
++#define HUSB2_EPT_RST 0x001c
++#define HUSB2_TST_SOF_CNT 0x00d0
++#define HUSB2_TST_CNT_A 0x00d4
++#define HUSB2_TST_CNT_B 0x00d8
++#define HUSB2_TST_MODE_REG 0x00dc
++#define HUSB2_TST 0x00f0
++
++/* USB endpoint register offsets */
++#define HUSB2_EPT_CFG 0x0000
++#define HUSB2_EPT_CTL_ENB 0x0004
++#define HUSB2_EPT_CTL_DIS 0x0008
++#define HUSB2_EPT_CTL 0x000c
++#define HUSB2_EPT_SET_STA 0x0014
++#define HUSB2_EPT_CLR_STA 0x0018
++#define HUSB2_EPT_STA 0x001c
++
++/* USB DMA register offsets */
++#define HUSB2_DMA_NXT_DSC 0x0000
++#define HUSB2_DMA_ADDRESS 0x0004
++#define HUSB2_DMA_CONTROL 0x0008
++#define HUSB2_DMA_STATUS 0x000c
++
++/* Bitfields in CTRL */
++#define HUSB2_DEV_ADDR_OFFSET 0
++#define HUSB2_DEV_ADDR_SIZE 7
++#define HUSB2_FADDR_EN_OFFSET 7
++#define HUSB2_FADDR_EN_SIZE 1
++#define HUSB2_EN_HUSB2_OFFSET 8
++#define HUSB2_EN_HUSB2_SIZE 1
++#define HUSB2_DETACH_OFFSET 9
++#define HUSB2_DETACH_SIZE 1
++#define HUSB2_REMOTE_WAKE_UP_OFFSET 10
++#define HUSB2_REMOTE_WAKE_UP_SIZE 1
++
++/* Bitfields in FNUM */
++#define HUSB2_MICRO_FRAME_NUM_OFFSET 0
++#define HUSB2_MICRO_FRAME_NUM_SIZE 3
++#define HUSB2_FRAME_NUMBER_OFFSET 3
++#define HUSB2_FRAME_NUMBER_SIZE 11
++#define HUSB2_FRAME_NUM_ERROR_OFFSET 31
++#define HUSB2_FRAME_NUM_ERROR_SIZE 1
++
++/* Bitfields in INT_ENB/INT_STA/INT_CLR */
++#define HUSB2_HIGH_SPEED_OFFSET 0
++#define HUSB2_HIGH_SPEED_SIZE 1
++#define HUSB2_DET_SUSPEND_OFFSET 1
++#define HUSB2_DET_SUSPEND_SIZE 1
++#define HUSB2_MICRO_SOF_OFFSET 2
++#define HUSB2_MICRO_SOF_SIZE 1
++#define HUSB2_SOF_OFFSET 3
++#define HUSB2_SOF_SIZE 1
++#define HUSB2_END_OF_RESET_OFFSET 4
++#define HUSB2_END_OF_RESET_SIZE 1
++#define HUSB2_WAKE_UP_OFFSET 5
++#define HUSB2_WAKE_UP_SIZE 1
++#define HUSB2_END_OF_RESUME_OFFSET 6
++#define HUSB2_END_OF_RESUME_SIZE 1
++#define HUSB2_UPSTREAM_RESUME_OFFSET 7
++#define HUSB2_UPSTREAM_RESUME_SIZE 1
++#define HUSB2_EPT_INT_OFFSET 8
++#define HUSB2_EPT_INT_SIZE 16
++#define HUSB2_DMA_INT_OFFSET 24
++#define HUSB2_DMA_INT_SIZE 8
++
++/* Bitfields in EPT_RST */
++#define HUSB2_RST_OFFSET 0
++#define HUSB2_RST_SIZE 16
++
++/* Bitfields in TST_SOF_CNT */
++#define HUSB2_SOF_CNT_MAX_OFFSET 0
++#define HUSB2_SOF_CNT_MAX_SIZE 7
++#define HUSB2_SOF_CNT_LOAD_OFFSET 7
++#define HUSB2_SOF_CNT_LOAD_SIZE 1
++
++/* Bitfields in TST_CNT_A */
++#define HUSB2_CNT_A_MAX_OFFSET 0
++#define HUSB2_CNT_A_MAX_SIZE 7
++#define HUSB2_CNT_A_LOAD_OFFSET 7
++#define HUSB2_CNT_A_LOAD_SIZE 1
++
++/* Bitfields in TST_CNT_B */
++#define HUSB2_CNT_B_MAX_OFFSET 0
++#define HUSB2_CNT_B_MAX_SIZE 7
++#define HUSB2_CNT_B_LOAD_OFFSET 7
++#define HUSB2_CNT_B_LOAD_SIZE 1
++
++/* Bitfields in TST_MODE_REG */
++#define HUSB2_TST_MODE_OFFSET 0
++#define HUSB2_TST_MODE_SIZE 6
++
++/* Bitfields in HUSB2_TST */
++#define HUSB2_SPEED_CFG_OFFSET 0
++#define HUSB2_SPEED_CFG_SIZE 2
++#define HUSB2_TST_J_MODE_OFFSET 2
++#define HUSB2_TST_J_MODE_SIZE 1
++#define HUSB2_TST_K_MODE_OFFSET 3
++#define HUSB2_TST_K_MODE_SIZE 1
++#define HUSB2_TST_PKT_MODE_OFFSE 4
++#define HUSB2_TST_PKT_MODE_SIZE 1
++#define HUSB2_OPMODE2_OFFSET 5
++#define HUSB2_OPMODE2_SIZE 1
++
++/* Bitfields in EPT_CFG */
++#define HUSB2_EPT_SIZE_OFFSET 0
++#define HUSB2_EPT_SIZE_SIZE 3
++#define HUSB2_EPT_DIR_OFFSET 3
++#define HUSB2_EPT_DIR_SIZE 1
++#define HUSB2_EPT_TYPE_OFFSET 4
++#define HUSB2_EPT_TYPE_SIZE 2
++#define HUSB2_BK_NUMBER_OFFSET 6
++#define HUSB2_BK_NUMBER_SIZE 2
++#define HUSB2_NB_TRANS_OFFSET 8
++#define HUSB2_NB_TRANS_SIZE 2
++#define HUSB2_EPT_MAPPED_OFFSET 31
++#define HUSB2_EPT_MAPPED_SIZE 1
++
++/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
++#define HUSB2_EPT_ENABLE_OFFSET 0
++#define HUSB2_EPT_ENABLE_SIZE 1
++#define HUSB2_AUTO_VALID_OFFSET 1
++#define HUSB2_AUTO_VALID_SIZE 1
++#define HUSB2_INT_DIS_DMA_OFFSET 3
++#define HUSB2_INT_DIS_DMA_SIZE 1
++#define HUSB2_NYET_DIS_OFFSET 4
++#define HUSB2_NYET_DIS_SIZE 1
++#define HUSB2_DATAX_RX_OFFSET 6
++#define HUSB2_DATAX_RX_SIZE 1
++#define HUSB2_MDATA_RX_OFFSET 7
++#define HUSB2_MDATA_RX_SIZE 1
++/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
++#define HUSB2_BUSY_BANK_IE_OFFSET 18
++#define HUSB2_BUSY_BANK_IE_SIZE 1
++
++/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
++#define HUSB2_FORCE_STALL_OFFSET 5
++#define HUSB2_FORCE_STALL_SIZE 1
++#define HUSB2_TOGGLE_SEQ_OFFSET 6
++#define HUSB2_TOGGLE_SEQ_SIZE 2
++#define HUSB2_ERR_OVFLW_OFFSET 8
++#define HUSB2_ERR_OVFLW_SIZE 1
++#define HUSB2_RX_BK_RDY_OFFSET 9
++#define HUSB2_RX_BK_RDY_SIZE 1
++#define HUSB2_KILL_BANK_OFFSET 9
++#define HUSB2_KILL_BANK_SIZE 1
++#define HUSB2_TX_COMPLETE_OFFSET 10
++#define HUSB2_TX_COMPLETE_SIZE 1
++#define HUSB2_TX_PK_RDY_OFFSET 11
++#define HUSB2_TX_PK_RDY_SIZE 1
++#define HUSB2_ISO_ERR_TRANS_OFFSET 11
++#define HUSB2_ISO_ERR_TRANS_SIZE 1
++#define HUSB2_RX_SETUP_OFFSET 12
++#define HUSB2_RX_SETUP_SIZE 1
++#define HUSB2_ISO_ERR_FLOW_OFFSET 12
++#define HUSB2_ISO_ERR_FLOW_SIZE 1
++#define HUSB2_STALL_SENT_OFFSET 13
++#define HUSB2_STALL_SENT_SIZE 1
++#define HUSB2_ISO_ERR_CRC_OFFSET 13
++#define HUSB2_ISO_ERR_CRC_SIZE 1
++#define HUSB2_ISO_ERR_NBTRANS_OFFSET 13
++#define HUSB2_ISO_ERR_NBTRANS_SIZE 1
++#define HUSB2_NAK_IN_OFFSET 14
++#define HUSB2_NAK_IN_SIZE 1
++#define HUSB2_ISO_ERR_FLUSH_OFFSET 14
++#define HUSB2_ISO_ERR_FLUSH_SIZE 1
++#define HUSB2_NAK_OUT_OFFSET 15
++#define HUSB2_NAK_OUT_SIZE 1
++#define HUSB2_CURRENT_BANK_OFFSET 16
++#define HUSB2_CURRENT_BANK_SIZE 2
++#define HUSB2_BUSY_BANKS_OFFSET 18
++#define HUSB2_BUSY_BANKS_SIZE 2
++#define HUSB2_BYTE_COUNT_OFFSET 20
++#define HUSB2_BYTE_COUNT_SIZE 11
++#define HUSB2_SHORT_PACKET_OFFSET 31
++#define HUSB2_SHORT_PACKET_SIZE 1
++
++/* Bitfields in DMA_CONTROL */
++#define HUSB2_DMA_CH_EN_OFFSET 0
++#define HUSB2_DMA_CH_EN_SIZE 1
++#define HUSB2_DMA_LINK_OFFSET 1
++#define HUSB2_DMA_LINK_SIZE 1
++#define HUSB2_DMA_END_TR_EN_OFFSET 2
++#define HUSB2_DMA_END_TR_EN_SIZE 1
++#define HUSB2_DMA_END_BUF_EN_OFFSET 3
++#define HUSB2_DMA_END_BUF_EN_SIZE 1
++#define HUSB2_DMA_END_TR_IE_OFFSET 4
++#define HUSB2_DMA_END_TR_IE_SIZE 1
++#define HUSB2_DMA_END_BUF_IE_OFFSET 5
++#define HUSB2_DMA_END_BUF_IE_SIZE 1
++#define HUSB2_DMA_DESC_LOAD_IE_OFFSET 6
++#define HUSB2_DMA_DESC_LOAD_IE_SIZE 1
++#define HUSB2_DMA_BURST_LOCK_OFFSET 7
++#define HUSB2_DMA_BURST_LOCK_SIZE 1
++#define HUSB2_DMA_BUF_LEN_OFFSET 16
++#define HUSB2_DMA_BUF_LEN_SIZE 16
++
++/* Bitfields in DMA_STATUS */
++#define HUSB2_DMA_CH_ACTIVE_OFFSET 1
++#define HUSB2_DMA_CH_ACTIVE_SIZE 1
++#define HUSB2_DMA_END_TR_ST_OFFSET 4
++#define HUSB2_DMA_END_TR_ST_SIZE 1
++#define HUSB2_DMA_END_BUF_ST_OFFSET 5
++#define HUSB2_DMA_END_BUF_ST_SIZE 1
++#define HUSB2_DMA_DESC_LOAD_ST_OFFSET 6
++#define HUSB2_DMA_DESC_LOAD_ST_SIZE 1
++
++/* Constants for SPEED_CFG */
++#define HUSB2_SPEED_CFG_NORMAL 0
++#define HUSB2_SPEED_CFG_FORCE_HIGH 2
++#define HUSB2_SPEED_CFG_FORCE_FULL 3
++
++/* Constants for EPT_SIZE */
++#define HUSB2_EPT_SIZE_8 0
++#define HUSB2_EPT_SIZE_16 1
++#define HUSB2_EPT_SIZE_32 2
++#define HUSB2_EPT_SIZE_64 3
++#define HUSB2_EPT_SIZE_128 4
++#define HUSB2_EPT_SIZE_256 5
++#define HUSB2_EPT_SIZE_512 6
++#define HUSB2_EPT_SIZE_1024 7
++
++/* Constants for EPT_TYPE */
++#define HUSB2_EPT_TYPE_CONTROL 0
++#define HUSB2_EPT_TYPE_ISO 1
++#define HUSB2_EPT_TYPE_BULK 2
++#define HUSB2_EPT_TYPE_INT 3
++
++/* Constants for BK_NUMBER */
++#define HUSB2_BK_NUMBER_ZERO 0
++#define HUSB2_BK_NUMBER_ONE 1
++#define HUSB2_BK_NUMBER_DOUBLE 2
++#define HUSB2_BK_NUMBER_TRIPLE 3
++
++/* Bit manipulation macros */
++#define HUSB2_BIT(name) \
++ (1 << HUSB2_##name##_OFFSET)
++#define HUSB2_BF(name,value) \
++ (((value) & ((1 << HUSB2_##name##_SIZE) - 1)) \
++ << HUSB2_##name##_OFFSET)
++#define HUSB2_BFEXT(name,value) \
++ (((value) >> HUSB2_##name##_OFFSET) \
++ & ((1 << HUSB2_##name##_SIZE) - 1))
++#define HUSB2_BFINS(name,value,old) \
++ (((old) & ~(((1 << HUSB2_##name##_SIZE) - 1) \
++ << HUSB2_##name##_OFFSET)) \
++ | HUSB2_BF(name,value))
++
++/* Register access macros */
++#define husb2_readl(udc,reg) \
++ __raw_readl((udc)->regs + HUSB2_##reg)
++#define husb2_writel(udc,reg,value) \
++ __raw_writel((value), (udc)->regs + HUSB2_##reg)
++#define husb2_ep_readl(ep,reg) \
++ __raw_readl((ep)->ep_regs + HUSB2_EPT_##reg)
++#define husb2_ep_writel(ep,reg,value) \
++ __raw_writel((value), (ep)->ep_regs + HUSB2_EPT_##reg)
++#define husb2_dma_readl(ep,reg) \
++ __raw_readl((ep)->dma_regs + HUSB2_DMA_##reg)
++#define husb2_dma_writel(ep,reg,value) \
++ __raw_writel((value), (ep)->dma_regs + HUSB2_DMA_##reg)
++
++/* Calculate base address for a given endpoint or DMA controller */
++#define HUSB2_EPT_BASE(x) (0x100 + (x) * 0x20)
++#define HUSB2_DMA_BASE(x) (0x300 + (x) * 0x10)
++#define HUSB2_FIFO_BASE(x) ((x) << 16)
++
++/* Synth parameters */
++#define HUSB2_NR_ENDPOINTS 7
++
++#define EP0_FIFO_SIZE 64
++#define EP0_EPT_SIZE HUSB2_EPT_SIZE_64
++#define EP0_NR_BANKS 1
++#define BULK_FIFO_SIZE 512
++#define BULK_EPT_SIZE HUSB2_EPT_SIZE_512
++#define BULK_NR_BANKS 2
++#define ISO_FIFO_SIZE 1024
++#define ISO_EPT_SIZE HUSB2_EPT_SIZE_1024
++#define ISO_NR_BANKS 3
++#define INT_FIFO_SIZE 64
++#define INT_EPT_SIZE HUSB2_EPT_SIZE_64
++#define INT_NR_BANKS 3
++
++enum husb2_ctrl_state {
++ WAIT_FOR_SETUP,
++ DATA_STAGE_IN,
++ DATA_STAGE_OUT,
++ STATUS_STAGE_IN,
++ STATUS_STAGE_OUT,
++ STATUS_STAGE_ADDR,
++};
++/*
++ EP_STATE_IDLE,
++ EP_STATE_SETUP,
++ EP_STATE_IN_DATA,
++ EP_STATE_OUT_DATA,
++ EP_STATE_SET_ADDR_STATUS,
++ EP_STATE_RX_STATUS,
++ EP_STATE_TX_STATUS,
++ EP_STATE_HALT,
++*/
++
++struct husb2_dma_desc {
++ dma_addr_t next;
++ dma_addr_t addr;
++ u32 ctrl;
++};
++
++struct husb2_ep {
++ int state;
++ void __iomem *ep_regs;
++ void __iomem *dma_regs;
++ void __iomem *fifo;
++ struct usb_ep ep;
++ struct husb2_udc *udc;
++
++ struct list_head queue;
++ const struct usb_endpoint_descriptor *desc;
++
++ u16 fifo_size;
++ u8 nr_banks;
++ u8 index;
++ u8 capabilities;
++
++#ifdef CONFIG_DEBUG_FS
++ u32 last_dma_status;
++ struct dentry *debugfs_dir;
++ struct dentry *debugfs_queue;
++ struct dentry *debugfs_dma_status;
++#endif
++};
++#define HUSB2_EP_CAP_ISOC 0x0001
++#define HUSB2_EP_CAP_DMA 0x0002
++
++struct husb2_packet {
++ struct husb2_dma_desc *desc;
++ dma_addr_t desc_dma;
++};
++
++struct husb2_request {
++ struct usb_request req;
++ struct list_head queue;
++
++ struct husb2_packet *packet;
++ unsigned int nr_pkts;
++
++ unsigned int submitted:1;
++ unsigned int using_dma:1;
++ unsigned int last_transaction:1;
++ unsigned int send_zlp:1;
++};
++
++struct husb2_udc {
++ spinlock_t lock;
++
++ void __iomem *regs;
++ void __iomem *fifo;
++
++ struct dma_pool *desc_pool;
++
++ struct usb_gadget gadget;
++ struct usb_gadget_driver *driver;
++ struct platform_device *pdev;
++ int irq;
++ struct clk *pclk;
++ struct clk *hclk;
++
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++#endif
++};
++
++#define to_husb2_ep(x) container_of((x), struct husb2_ep, ep)
++#define to_husb2_req(x) container_of((x), struct husb2_request, req)
++#define to_husb2_udc(x) container_of((x), struct husb2_udc, gadget)
++
++#define ep_index(ep) ((ep)->index)
++#define ep_can_dma(ep) ((ep)->capabilities & HUSB2_EP_CAP_DMA)
++#define ep_is_in(ep) (((ep)->desc->bEndpointAddress \
++ & USB_ENDPOINT_DIR_MASK) \
++ == USB_DIR_IN)
++#define ep_is_isochronous(ep) \
++ (((ep)->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) \
++ == USB_ENDPOINT_XFER_ISOC)
++#define ep_is_control(ep) (ep_index(ep) == 0)
++#define ep_name(ep) ((ep)->ep.name)
++#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
++
++#endif /* __LINUX_USB_GADGET_HUSB2_H */
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/Kconfig linux-2.6.20.4-atmel/drivers/usb/gadget/Kconfig
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -154,6 +154,16 @@
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
++config USB_GADGET_HUSB2DEV
++ boolean "Atmel HUSB2DEVICE"
++ select USB_GADGET_DUALSPEED
++ depends on AVR32
++
++config USB_HUSB2DEV
++ tristate
++ depends on USB_GADGET_HUSB2DEV
++ default USB_GADGET
++ select USB_GADGET_SELECTED
+
+ config USB_GADGET_OMAP
+ boolean "OMAP USB Device Controller"
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/Makefile linux-2.6.20.4-atmel/drivers/usb/gadget/Makefile
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_USB_OMAP) += omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
+ obj-$(CONFIG_USB_AT91) += at91_udc.o
++obj-$(CONFIG_USB_HUSB2DEV) += husb2_udc.o
+
+ #
+ # USB gadget drivers
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/serial.c linux-2.6.20.4-atmel/drivers/usb/gadget/serial.c
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/serial.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/serial.c 2007-03-24 16:42:28.000000000 +0100
+@@ -333,7 +333,7 @@
+ .strings = gs_strings,
+ };
+
+-static struct usb_device_descriptor gs_device_desc = {
++static struct usb_device_descriptor __attribute__((aligned(2))) gs_device_desc = {
+ .bLength = USB_DT_DEVICE_SIZE,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+@@ -353,7 +353,7 @@
+ .bmAttributes = USB_OTG_SRP,
+ };
+
+-static struct usb_config_descriptor gs_bulk_config_desc = {
++static struct usb_config_descriptor __attribute__((aligned(2))) gs_bulk_config_desc = {
+ .bLength = USB_DT_CONFIG_SIZE,
+ .bDescriptorType = USB_DT_CONFIG,
+ /* .wTotalLength computed dynamically */
+@@ -364,7 +364,7 @@
+ .bMaxPower = 1,
+ };
+
+-static struct usb_config_descriptor gs_acm_config_desc = {
++static struct usb_config_descriptor __attribute__((aligned(2))) gs_acm_config_desc = {
+ .bLength = USB_DT_CONFIG_SIZE,
+ .bDescriptorType = USB_DT_CONFIG,
+ /* .wTotalLength computed dynamically */
+@@ -375,7 +375,7 @@
+ .bMaxPower = 1,
+ };
+
+-static const struct usb_interface_descriptor gs_bulk_interface_desc = {
++static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_bulk_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GS_BULK_INTERFACE_ID,
+@@ -386,7 +386,7 @@
+ .iInterface = GS_DATA_STR_ID,
+ };
+
+-static const struct usb_interface_descriptor gs_control_interface_desc = {
++static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_control_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
+@@ -397,7 +397,7 @@
+ .iInterface = GS_CONTROL_STR_ID,
+ };
+
+-static const struct usb_interface_descriptor gs_data_interface_desc = {
++static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_data_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GS_DATA_INTERFACE_ID,
+@@ -408,7 +408,7 @@
+ .iInterface = GS_DATA_STR_ID,
+ };
+
+-static const struct usb_cdc_header_desc gs_header_desc = {
++static const struct usb_cdc_header_desc __attribute__((aligned(2))) gs_header_desc = {
+ .bLength = sizeof(gs_header_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+@@ -438,7 +438,7 @@
+ .bSlaveInterface0 = 1, /* index of data interface */
+ };
+
+-static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
++static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_notify_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+@@ -447,14 +447,14 @@
+ .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
+ };
+
+-static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
++static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ };
+
+-static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
++static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+@@ -484,7 +484,7 @@
+ };
+
+ #ifdef CONFIG_USB_GADGET_DUALSPEED
+-static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
++static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_notify_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+@@ -493,21 +493,21 @@
+ .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
+ };
+
+-static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
++static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+ };
+
+-static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
++static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+ };
+
+-static struct usb_qualifier_descriptor gs_qualifier_desc = {
++static struct usb_qualifier_descriptor __attribute__((aligned(2))) gs_qualifier_desc = {
+ .bLength = sizeof(struct usb_qualifier_descriptor),
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/zero.c linux-2.6.20.4-atmel/drivers/usb/gadget/zero.c
+--- linux-2.6.20.4-0rig/drivers/usb/gadget/zero.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/gadget/zero.c 2007-03-24 16:42:28.000000000 +0100
+@@ -221,7 +221,7 @@
+ #define CONFIG_LOOPBACK 2
+
+ static struct usb_device_descriptor
+-device_desc = {
++device_desc __attribute__((aligned(2))) = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+@@ -237,7 +237,7 @@
+ };
+
+ static struct usb_config_descriptor
+-source_sink_config = {
++source_sink_config __attribute__((aligned(2))) = {
+ .bLength = sizeof source_sink_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+@@ -250,7 +250,7 @@
+ };
+
+ static struct usb_config_descriptor
+-loopback_config = {
++loopback_config __attribute__((aligned(2))) = {
+ .bLength = sizeof loopback_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+@@ -273,7 +273,7 @@
+ /* one interface in each configuration */
+
+ static const struct usb_interface_descriptor
+-source_sink_intf = {
++source_sink_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof source_sink_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -283,7 +283,7 @@
+ };
+
+ static const struct usb_interface_descriptor
+-loopback_intf = {
++loopback_intf __attribute__((aligned(2))) = {
+ .bLength = sizeof loopback_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+@@ -295,7 +295,7 @@
+ /* two full speed bulk endpoints; their use is config-dependent */
+
+ static struct usb_endpoint_descriptor
+-fs_source_desc = {
++fs_source_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -304,7 +304,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-fs_sink_desc = {
++fs_sink_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -340,7 +340,7 @@
+ */
+
+ static struct usb_endpoint_descriptor
+-hs_source_desc = {
++hs_source_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -349,7 +349,7 @@
+ };
+
+ static struct usb_endpoint_descriptor
+-hs_sink_desc = {
++hs_sink_desc __attribute__((aligned(2))) = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+@@ -358,7 +358,7 @@
+ };
+
+ static struct usb_qualifier_descriptor
+-dev_qualifier = {
++dev_qualifier __attribute__((aligned(2))) = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+diff -urN linux-2.6.20.4-0rig/drivers/usb/host/ohci-at91.c linux-2.6.20.4-atmel/drivers/usb/host/ohci-at91.c
+--- linux-2.6.20.4-0rig/drivers/usb/host/ohci-at91.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/usb/host/ohci-at91.c 2007-03-24 16:39:15.000000000 +0100
+@@ -18,19 +18,38 @@
+ #include <asm/mach-types.h>
+ #include <asm/hardware.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
+
+ #ifndef CONFIG_ARCH_AT91
+ #error "CONFIG_ARCH_AT91 must be defined."
+ #endif
+
+ /* interface and function clocks */
+-static struct clk *iclk, *fclk;
++static struct clk *iclk, *fclk, *hclock;
+ static int clocked;
+
+ extern int usb_disabled(void);
+
+ /*-------------------------------------------------------------------------*/
+
++static void at91_start_clock(void)
++{
++ if (cpu_is_at91sam9261())
++ clk_enable(hclock);
++ clk_enable(iclk);
++ clk_enable(fclk);
++ clocked = 1;
++}
++
++static void at91_stop_clock(void)
++{
++ clk_disable(fclk);
++ clk_disable(iclk);
++ if (cpu_is_at91sam9261())
++ clk_disable(hclock);
++ clocked = 0;
++}
++
+ static void at91_start_hc(struct platform_device *pdev)
+ {
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+@@ -41,9 +60,7 @@
+ /*
+ * Start the USB clocks.
+ */
+- clk_enable(iclk);
+- clk_enable(fclk);
+- clocked = 1;
++ at91_start_clock();
+
+ /*
+ * The USB host controller must remain in reset.
+@@ -66,9 +83,7 @@
+ /*
+ * Stop the USB clocks.
+ */
+- clk_disable(fclk);
+- clk_disable(iclk);
+- clocked = 0;
++ at91_stop_clock();
+ }
+
+
+@@ -126,6 +141,8 @@
+
+ iclk = clk_get(&pdev->dev, "ohci_clk");
+ fclk = clk_get(&pdev->dev, "uhpck");
++ if (cpu_is_at91sam9261())
++ hclock = clk_get(&pdev->dev, "hck0");
+
+ at91_start_hc(pdev);
+ ohci_hcd_init(hcd_to_ohci(hcd));
+@@ -137,6 +154,8 @@
+ /* Error handling */
+ at91_stop_hc(pdev);
+
++ if (cpu_is_at91sam9261())
++ clk_put(hclock);
+ clk_put(fclk);
+ clk_put(iclk);
+
+@@ -170,11 +189,12 @@
+ at91_stop_hc(pdev);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+- disable_irq_wake(hcd->irq);
+
++ if (cpu_is_at91sam9261())
++ clk_put(hclock);
+ clk_put(fclk);
+ clk_put(iclk);
+- fclk = iclk = NULL;
++ fclk = iclk = hclock = NULL;
+
+ dev_set_drvdata(&pdev->dev, NULL);
+ return 0;
+@@ -271,8 +291,6 @@
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(hcd->irq);
+- else
+- disable_irq_wake(hcd->irq);
+
+ /*
+ * The integrated transceivers seem unable to notice disconnect,
+@@ -283,9 +301,7 @@
+ */
+ if (at91_suspend_entering_slow_clock()) {
+ ohci_usb_reset (ohci);
+- clk_disable(fclk);
+- clk_disable(iclk);
+- clocked = 0;
++ at91_stop_clock();
+ }
+
+ return 0;
+@@ -293,11 +309,13 @@
+
+ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
+ {
+- if (!clocked) {
+- clk_enable(iclk);
+- clk_enable(fclk);
+- clocked = 1;
+- }
++ struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++ if (device_may_wakeup(&pdev->dev))
++ disable_irq_wake(hcd->irq);
++
++ if (!clocked)
++ at91_start_clock();
+
+ return 0;
+ }
+diff -urN linux-2.6.20.4-0rig/drivers/video/atmel_lcdfb.c linux-2.6.20.4-atmel/drivers/video/atmel_lcdfb.c
+--- linux-2.6.20.4-0rig/drivers/video/atmel_lcdfb.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/atmel_lcdfb.c 2007-03-24 16:39:15.000000000 +0100
+@@ -0,0 +1,781 @@
++/*
++ * drivers/video/atmel_lcdfb.c
++ *
++ * Driver for AT91/AVR32 LCD Controller
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/gpio.h>
++
++#include <video/atmel_lcdc.h>
++
++#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
++#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
++
++/* More or less configurable parameters */
++#define ATMEL_LCDC_FIFO_SIZE 512
++#define ATMEL_LCDC_CRST_VAL_DEFAULT 0xc8
++#define ATMEL_LCDC_DMA_BURST_LEN 16
++
++#define LCD_POWER_ON 0
++#define LCD_POWER_OFF 1
++
++#if defined(CONFIG_ARCH_AT91)
++static inline void atmel_lcdfb_update_dma2d(struct fb_info *info,
++ struct fb_var_screeninfo *var) { }
++static inline void atmel_lcdfb_set_2dcfg(struct fb_info *info) { }
++#elif defined(CONFIG_AVR32)
++static void atmel_lcdfb_update_dma2d(struct fb_info *info,
++ struct fb_var_screeninfo *var)
++{
++ dma2dcfg = lcdc_readl(sinfo, ATMEL_LCDC_DMA2DCFG);
++ dma2dcfg = LCDC_INSBF(DMA2DCFG_PIXELOFF, pixeloff, dma2dcfg);
++ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
++
++ /* Update configuration */
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
++ lcdc_readl(sinfo, ATMEL_LCDC_DMACON) | LCDC_BIT(DMACON_DMAUPDT));
++}
++
++static void atmel_lcdfb_set_2dcfg(struct fb_info *info)
++{
++ /* ...set 2D configuration (necessary for xres_virtual != xres) */
++ value = LCDC_MKBF(DMA2DCFG_ADDRINC,
++ info->var.xres_virtual - info->var.xres);
++ lcdc_writel(sinfo, DMA2DCFG, value);
++
++ /* ...wait for DMA engine to become idle... */
++ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & LCDC_BIT(DMACON_DMABUSY))
++ msleep(10);
++}
++#endif
++
++
++static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_TRUECOLOR,
++ .xpanstep = 0,
++ .ypanstep = 0,
++ .ywrapstep = 0,
++ .accel = FB_ACCEL_NONE,
++};
++
++static u32 pseudo_palette[16] = {
++ 0x000000,
++ 0xaa0000,
++ 0x00aa00,
++ 0xaa5500,
++ 0x0000aa,
++ 0xaa00aa,
++ 0x00aaaa,
++ 0xaaaaaa,
++ 0x555555,
++ 0xff5555,
++ 0x55ff55,
++ 0xffff55,
++ 0x5555ff,
++ 0xff55ff,
++ 0x55ffff,
++ 0xffffff
++};
++
++static void atmel_lcdfb_update_dma(struct fb_info *info,
++ struct fb_var_screeninfo *var)
++{
++ struct atmel_lcdfb_info *sinfo = info->par;
++ struct fb_fix_screeninfo *fix = &info->fix;
++ unsigned long dma_addr;
++
++ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
++ + var->xoffset * var->bits_per_pixel / 8);
++
++ dma_addr &= ~3UL;
++
++ /* Set framebuffer DMA base address and pixel offset */
++ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
++
++ atmel_lcdfb_update_dma2d(info, var);
++}
++
++static inline void atmel_lcdfb_unmap_video_memory(struct atmel_lcdfb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++
++ dma_free_writecombine(info->device, sinfo->map_size,
++ sinfo->map_cpu, sinfo->map_dma);
++}
++
++/**
++ * atmel_lcdfb_alloc_framebuffer - Allocate framebuffer memory
++ * @sinfo: the frame buffer to allocate memory for
++ */
++static int atmel_lcdfb_map_video_memory(struct atmel_lcdfb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++ struct fb_var_screeninfo *var = &info->var;
++
++ sinfo->map_size = (var->xres_virtual * var->yres_virtual
++ * ((var->bits_per_pixel + 7) / 8));
++
++ sinfo->map_cpu = dma_alloc_writecombine(info->device, sinfo->map_size,
++ &sinfo->map_dma, GFP_KERNEL);
++
++ if (!sinfo->map_cpu) {
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++/**
++ * atmel_lcdfb_check_var - Validates a var passed in.
++ * @var: frame buffer variable screen structure
++ * @info: frame buffer structure that represents a single frame buffer
++ *
++ * Checks to see if the hardware supports the state requested by
++ * var passed in. This function does not alter the hardware
++ * state!!! This means the data stored in struct fb_info and
++ * struct atmel_lcdfb_info do not change. This includes the var
++ * inside of struct fb_info. Do NOT change these. This function
++ * can be called on its own if we intent to only test a mode and
++ * not actually set it. The stuff in modedb.c is a example of
++ * this. If the var passed in is slightly off by what the
++ * hardware can support then we alter the var PASSED in to what
++ * we can do. If the hardware doesn't support mode change a
++ * -EINVAL will be returned by the upper layers. You don't need
++ * to implement this function then. If you hardware doesn't
++ * support changing the resolution then this function is not
++ * needed. In this case the driver would just provide a var that
++ * represents the static state the screen is in.
++ *
++ * Returns negative errno on error, or zero on success.
++ */
++static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ struct device *dev = info->device;
++ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned long clk_value_khz = 0;
++
++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
++
++ dev_dbg(dev, "%s:\n", __func__);
++ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
++ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
++ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
++ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
++
++ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
++ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
++ return -EINVAL;
++ }
++
++ /* Force same alignment for each line */
++ var->xres = (var->xres + 3) & ~3UL;
++ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
++
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
++ var->transp.offset = var->transp.length = 0;
++
++ switch (var->bits_per_pixel) {
++ case 2:
++ case 4:
++ case 8:
++ var->red.offset = var->green.offset = var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length
++ = var->bits_per_pixel;
++ break;
++ case 15:
++ case 16:
++ var->red.offset = 0;
++ var->green.offset = 5;
++ var->blue.offset = 10;
++ var->red.length = var->green.length = var->blue.length = 5;
++ break;
++ case 24:
++ case 32:
++ var->red.offset = 16;
++ var->green.offset = 8;
++ var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length = 8;
++ break;
++ default:
++ dev_err(dev, "color depth %d not supported\n",
++ var->bits_per_pixel);
++ return -EINVAL;
++ }
++
++ var->xoffset = var->yoffset = 0;
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
++ var->transp.msb_right = 0;
++
++ return 0;
++}
++
++/**
++ * atmel_lcdfb_set_par - Alters the hardware state.
++ * @info: frame buffer structure that represents a single frame buffer
++ *
++ * Using the fb_var_screeninfo in fb_info we set the resolution
++ * of the this particular framebuffer. This function alters the
++ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
++ * not alter var in fb_info since we are using that data. This
++ * means we depend on the data in var inside fb_info to be
++ * supported by the hardware. atmel_lcdfb_check_var is always called
++ * before atmel_lcdfb_set_par to ensure this. Again if you can't
++ * change the resolution you don't need this function.
++ *
++ */
++static int atmel_lcdfb_set_par(struct fb_info *info)
++{
++ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned long value;
++ unsigned long clk_value_khz = 0;
++
++ dev_dbg(info->device, "%s:\n", __func__);
++ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
++ info->var.xres, info->var.yres,
++ info->var.xres_virtual, info->var.yres_virtual);
++
++ /* Turn off the LCD controller and the DMA controller */
++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
++
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
++
++ /* Reset LCDC DMA*/
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
++
++ if (info->var.bits_per_pixel <= 8)
++ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++ else
++ info->fix.visual = FB_VISUAL_TRUECOLOR;
++
++ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++
++ /* Re-initialize the DMA engine... */
++ dev_dbg(info->device, " * update DMA engine\n");
++ atmel_lcdfb_update_dma(info, &info->var);
++
++ /* ...set frame size and burst length = 8 words (?) */
++ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
++ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
++ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
++
++ atmel_lcdfb_set_2dcfg(info);
++
++ /* Now, the LCDC core... */
++
++ /* Set pixel clock */
++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
++
++ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
++
++ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
++ value++;
++
++ value = (value / 2) - 1;
++
++ if (value == 0) {
++ dev_notice(info->device, "Bypassing pixel clock divider\n");
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
++ } else
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
++
++ /* Initialize control register 2 */
++ value = sinfo->default_lcdcon2;
++
++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++ value |= ATMEL_LCDC_INVLINE_INVERTED;
++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++ value |= ATMEL_LCDC_INVFRAME_INVERTED;
++
++ switch (info->var.bits_per_pixel) {
++ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
++ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
++ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
++ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
++ case 15: /* fall through */
++ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
++ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
++ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
++ default: BUG(); break;
++ }
++ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
++
++ /* Vertical timing */
++ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
++ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
++ value |= info->var.lower_margin;
++ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
++ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
++
++ /* Horizontal timing */
++ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
++ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
++ value |= (info->var.left_margin - 1);
++ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
++ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
++
++ /* Display size */
++ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
++ value |= info->var.yres - 1;
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
++
++ /* FIFO Threshold: Use formula from data sheet */
++ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
++ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
++
++ /* Toggle LCD_MODE every frame */
++ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
++
++ /* Disable all interrupts */
++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
++
++ // Set contrast
++ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CRST_VAL_DEFAULT);
++ /* ...wait for DMA engine to become idle... */
++ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
++ msleep(10);
++
++ dev_dbg(info->device, " * re-enable DMA engine\n");
++ /* ...and enable it with updated configuration */
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
++
++ dev_dbg(info->device, " * re-enable LCDC core\n");
++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
++ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
++
++ dev_dbg(info->device, " * DONE\n");
++
++ return 0;
++}
++
++static inline u_int chan_to_field(u_int chan, const struct fb_bitfield *bf)
++{
++ chan &= 0xffff;
++ chan >>= 16 - bf->length;
++ return chan << bf->offset;
++}
++
++/**
++ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
++ * @regno: Which register in the CLUT we are programming
++ * @red: The red value which can be up to 16 bits wide
++ * @green: The green value which can be up to 16 bits wide
++ * @blue: The blue value which can be up to 16 bits wide.
++ * @transp: If supported the alpha value which can be up to 16 bits wide.
++ * @info: frame buffer info structure
++ *
++ * Set a single color register. The values supplied have a 16 bit
++ * magnitude which needs to be scaled in this function for the hardware.
++ * Things to take into consideration are how many color registers, if
++ * any, are supported with the current color visual. With truecolor mode
++ * no color palettes are supported. Here a psuedo palette is created
++ * which we store the value in pseudo_palette in struct fb_info. For
++ * pseudocolor mode we have a limited color palette. To deal with this
++ * we can program what color is displayed for a particular pixel value.
++ * DirectColor is similar in that we can program each color field. If
++ * we have a static colormap we don't need to implement this function.
++ *
++ * Returns negative errno on error, or zero on success. In an
++ * ideal world, this would have been the case, but as it turns
++ * out, the other drivers return 1 on failure, so that's what
++ * we're going to do.
++ */
++static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
++ unsigned int green, unsigned int blue,
++ unsigned int transp, struct fb_info *info)
++{
++ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned int val;
++ u32 *pal;
++ int ret = 1;
++
++ if (info->var.grayscale)
++ red = green = blue = (19595 * red + 38470 * green
++ + 7471 * blue) >> 16;
++
++ switch (info->fix.visual) {
++ case FB_VISUAL_TRUECOLOR:
++ if (regno < 16) {
++ pal = info->pseudo_palette;
++
++ val = chan_to_field(red, &info->var.red);
++ val |= chan_to_field(green, &info->var.green);
++ val |= chan_to_field(blue, &info->var.blue);
++
++ pal[regno] = val;
++ ret = 0;
++ }
++ break;
++
++ case FB_VISUAL_PSEUDOCOLOR:
++ if (regno < 256) {
++ val = ((red >> 11) & 0x001f);
++ val |= ((green >> 6) & 0x03e0);
++ val |= ((blue >> 1) & 0x7c00);
++
++ /*
++ * TODO: intensity bit. Maybe something like
++ * ~(red[10] ^ green[10] ^ blue[10]) & 1
++ */
++
++ lcdc_writel(sinfo, ATMEL_LCDC_LUT_(regno), val);
++ ret = 0;
++ }
++ break;
++ }
++
++ return ret;
++}
++
++static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ dev_dbg(info->device, "%s\n", __func__);
++
++ atmel_lcdfb_update_dma(info, var);
++
++ return 0;
++}
++
++static struct fb_ops atmel_lcdfb_ops = {
++ .owner = THIS_MODULE,
++ .fb_check_var = atmel_lcdfb_check_var,
++ .fb_set_par = atmel_lcdfb_set_par,
++ .fb_setcolreg = atmel_lcdfb_setcolreg,
++ .fb_pan_display = atmel_lcdfb_pan_display,
++ .fb_fillrect = cfb_fillrect,
++ .fb_copyarea = cfb_copyarea,
++ .fb_imageblit = cfb_imageblit,
++};
++
++static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
++{
++ struct fb_info *info = dev_id;
++ struct atmel_lcdfb_info *sinfo = info->par;
++ u32 status;
++
++ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
++ return IRQ_HANDLED;
++}
++
++static int atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++ int ret = 0;
++
++ info->screen_base = sinfo->map_cpu;
++ info->fix.smem_start = sinfo->map_dma;
++ info->fix.smem_len = sinfo->map_size;
++
++ memset(info->screen_base, 0, info->fix.smem_len);
++ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
++
++ dev_info(info->device,
++ "%luKiB frame buffer at %08lx (mapped at %p)\n",
++ (unsigned long)info->fix.smem_len / 1024,
++ (unsigned long)info->fix.smem_start,
++ info->screen_base);
++
++ /* Allocate colormap */
++ ret = fb_alloc_cmap(&info->cmap, 256, 0);
++ if (ret < 0)
++ dev_err(info->device, "Alloc color map failed\n");
++
++ return ret;
++}
++
++static int atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
++{
++ int ret = 0;
++
++ if (sinfo->bus_clk && !IS_ERR(sinfo->bus_clk))
++ clk_enable(sinfo->bus_clk);
++ else {
++ if (cpu_is_at91sam9261()) {
++ /* not an error for other cpus */
++ ret = -ENXIO;
++ }
++ }
++
++ if (sinfo->lcdc_clk && !IS_ERR(sinfo->lcdc_clk))
++ clk_enable(sinfo->lcdc_clk);
++ else
++ ret = -ENXIO;
++
++ return ret;
++}
++
++static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
++{
++ if (sinfo->bus_clk && !IS_ERR(sinfo->bus_clk))
++ clk_disable(sinfo->bus_clk);
++ if (sinfo->lcdc_clk && !IS_ERR(sinfo->lcdc_clk))
++ clk_disable(sinfo->lcdc_clk);
++}
++
++
++static int atmel_lcdfb_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fb_info *info;
++ struct atmel_lcdfb_info *sinfo;
++ struct resource *regs = NULL;
++ struct resource *map = NULL;
++ int ret;
++
++ dev_dbg(dev, "%s BEGIN\n", __func__);
++
++ ret = -ENOMEM;
++ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
++ if (!info) {
++ dev_err(dev, "cannot allocate memory\n");
++ goto out;
++ }
++
++ sinfo = info->par;
++ memcpy(sinfo, dev->platform_data, sizeof(struct atmel_lcdfb_info));
++ sinfo->info = info;
++ sinfo->pdev = pdev;
++
++ strcpy(info->fix.id, sinfo->pdev->name);
++ info->flags = sinfo->default_flags;
++ info->pseudo_palette = pseudo_palette;
++ info->fbops = &atmel_lcdfb_ops;
++
++ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
++ info->fix = atmel_lcdfb_fix;
++
++ /* Enable LCDC Clocks */
++ if (cpu_is_at91sam9261())
++ sinfo->bus_clk = clk_get(dev, "hck1");
++ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
++ if (atmel_lcdfb_start_clock(sinfo)) {
++ dev_err(dev, "unable to clock LCDC\n");
++ goto free_info;
++ }
++
++ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
++ info->monspecs.modedb_len, info->monspecs.modedb,
++ sinfo->default_bpp);
++ if (!ret) {
++ dev_err(dev, "no suitable video mode found\n");
++ goto stop_clk;
++ }
++
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_err(dev, "resources unusable\n");
++ ret = -ENXIO;
++ goto stop_clk;
++ }
++
++ sinfo->irq_base = platform_get_irq(pdev, 0);
++ if (sinfo->irq_base < 0) {
++ dev_err(dev, "unable to get irq\n");
++ ret = sinfo->irq_base;
++ goto stop_clk;
++ }
++
++ /* Initialize video memory */
++ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (map) {
++ /* use a pre-allocated memory buffer */
++ sinfo->map_dma = map->start;
++ sinfo->map_size = map->end - map->start + 1;
++ if (!request_mem_region(sinfo->map_dma,
++ sinfo->map_size, pdev->name)) {
++ ret = -EBUSY;
++ goto stop_clk;
++ }
++
++ sinfo->map_cpu = ioremap(sinfo->map_dma, sinfo->map_size);
++ if (!sinfo->map_cpu)
++ goto release_intmem;
++ } else {
++ /* alocate memory buffer */
++ ret = atmel_lcdfb_map_video_memory(sinfo);
++ if (ret < 0) {
++ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
++ goto stop_clk;
++ }
++ }
++
++ /* LCDC registers */
++ info->fix.mmio_start = regs->start;
++ info->fix.mmio_len = regs->end - regs->start + 1;
++
++ if (!request_mem_region(info->fix.mmio_start,
++ info->fix.mmio_len, pdev->name)) {
++ ret = -EBUSY;
++ goto free_fb;
++ }
++
++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++ if (!sinfo->mmio) {
++ dev_err(dev, "cannot map LCDC registers\n");
++ goto release_mem;
++ }
++
++ /* interrupt */
++ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
++ if (ret) {
++ dev_err(dev, "request_irq failed: %d\n", ret);
++ goto unmap_mmio;
++ }
++
++ ret = atmel_lcdfb_init_fbinfo(sinfo);
++ if (ret < 0) {
++ dev_err(dev, "init fbinfo failed: %d\n", ret);
++ goto unregister_irqs;
++ }
++
++ /*
++ * This makes sure that our colour bitfield
++ * descriptors are correctly initialised.
++ */
++ atmel_lcdfb_check_var(&info->var, info);
++ atmel_lcdfb_set_par(info);
++
++ ret = fb_set_var(info, &info->var);
++ if (ret) {
++ dev_warn(dev, "unable to set display parameters\n");
++ goto free_cmap;
++ }
++
++ dev_set_drvdata(dev, info);
++
++ /*
++ * Tell the world that we're ready to go
++ */
++ ret = register_framebuffer(info);
++ if (ret < 0) {
++ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
++ goto free_cmap;
++ }
++
++ /* Power up the LCDC screen */
++ if (sinfo->power_control_pin)
++ at91_set_gpio_value(sinfo->power_control_pin, LCD_POWER_ON);
++
++ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
++ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
++
++ return 0;
++
++
++free_cmap:
++ fb_dealloc_cmap(&info->cmap);
++unregister_irqs:
++ free_irq(sinfo->irq_base, info);
++unmap_mmio:
++ iounmap(sinfo->mmio);
++release_mem:
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++free_fb:
++ if (map) {
++ iounmap(sinfo->map_cpu);
++ } else {
++ atmel_lcdfb_unmap_video_memory(sinfo);
++ }
++
++release_intmem:
++ if (map) {
++ release_mem_region(sinfo->map_dma, sinfo->map_size);
++ }
++stop_clk:
++ atmel_lcdfb_stop_clock(sinfo);
++free_info:
++ framebuffer_release(info);
++out:
++ dev_dbg(dev, "%s FAILED\n", __func__);
++ return ret;
++}
++
++static int atmel_lcdfb_remove(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fb_info *info = dev_get_drvdata(dev);
++ struct atmel_lcdfb_info *sinfo = info->par;
++
++ if (!sinfo)
++ return 0;
++
++ if (sinfo->power_control_pin)
++ at91_set_gpio_value(sinfo->power_control_pin, LCD_POWER_OFF);
++ unregister_framebuffer(info);
++ atmel_lcdfb_stop_clock(sinfo);
++ fb_dealloc_cmap(&info->cmap);
++ free_irq(sinfo->irq_base, info);
++ iounmap(sinfo->mmio);
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
++ iounmap(sinfo->map_cpu);
++ release_mem_region(sinfo->map_dma, sinfo->map_size);
++ } else {
++ atmel_lcdfb_unmap_video_memory(sinfo);
++ }
++
++ dev_set_drvdata(dev, NULL);
++ framebuffer_release(info);
++
++ return 0;
++}
++
++static struct platform_driver atmel_lcdfb_driver = {
++ .probe = atmel_lcdfb_probe,
++ .remove = atmel_lcdfb_remove,
++ .driver = {
++ .name = "atmel_lcdfb",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_lcdfb_init(void)
++{
++ return platform_driver_register(&atmel_lcdfb_driver);
++}
++
++static void __exit atmel_lcdfb_exit(void)
++{
++ platform_driver_unregister(&atmel_lcdfb_driver);
++}
++
++module_init(atmel_lcdfb_init);
++module_exit(atmel_lcdfb_exit);
++
++MODULE_AUTHOR("Atmel Corporation");
++MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/Kconfig linux-2.6.20.4-atmel/drivers/video/backlight/Kconfig
+--- linux-2.6.20.4-0rig/drivers/video/backlight/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/backlight/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -42,6 +42,18 @@
+ depends on LCD_CLASS_DEVICE
+ default y
+
++config LCD_LTV350QV
++ tristate "Samsung LTV350QV LCD Panel"
++ depends on LCD_DEVICE && SPI
++ default n
++ help
++ If you have a Samsung LTV350QV LCD panel, say y to include a
++ power control driver for it. The panel starts up in power
++ off state, so you need this driver in order to see any
++ output.
++
++ The LTV350QV panel is present on most ATSTK1000 boards.
++
+ config BACKLIGHT_CORGI
+ tristate "Sharp Corgi Backlight Driver (SL Series)"
+ depends on BACKLIGHT_DEVICE && PXA_SHARPSL
+diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/ltv350qv.c linux-2.6.20.4-atmel/drivers/video/backlight/ltv350qv.c
+--- linux-2.6.20.4-0rig/drivers/video/backlight/ltv350qv.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/backlight/ltv350qv.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,300 @@
++/*
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/reboot.h>
++#include <linux/spi/spi.h>
++
++#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++ struct spi_device *spi;
++ u8 *buffer;
++ int power;
++ struct semaphore lock;
++ struct lcd_device *ld;
++ struct list_head list;
++ int halt_done;
++};
++
++static LIST_HEAD(lcd_list);
++
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++{
++ struct spi_message msg;
++ struct spi_transfer index_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
++ struct spi_transfer value_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
++
++ spi_message_init(&msg);
++
++ /* register index */
++ lcd->buffer[0] = 0x74;
++ lcd->buffer[1] = 0x00;
++ lcd->buffer[2] = reg & 0x7f;
++ index_xfer.tx_buf = lcd->buffer;
++ spi_message_add_tail(&index_xfer, &msg);
++
++ /* register value */
++ lcd->buffer[4] = 0x76;
++ lcd->buffer[5] = val >> 8;
++ lcd->buffer[6] = val;
++ value_xfer.tx_buf = lcd->buffer + 4;
++ spi_message_add_tail(&value_xfer, &msg);
++
++ return spi_sync(lcd->spi, &msg);
++}
++
++#define write_reg(_spi, reg, val) \
++ do { \
++ ret = ltv350qv_write_reg(_spi, reg, val); \
++ if (ret) \
++ goto out; \
++ } while (0)
++
++static int ltv350qv_power_on(struct ltv350qv *lcd)
++{
++ int ret;
++
++ write_reg(lcd, 9, 0x0000);
++ msleep(15);
++ write_reg(lcd, 9, 0x4000);
++ write_reg(lcd, 10, 0x2000);
++ write_reg(lcd, 9, 0x4055);
++ msleep(55);
++ write_reg(lcd, 1, 0x409d);
++ write_reg(lcd, 2, 0x0204);
++ write_reg(lcd, 3, 0x0100);
++ write_reg(lcd, 4, 0x3000);
++ write_reg(lcd, 5, 0x4003);
++ write_reg(lcd, 6, 0x000a);
++ write_reg(lcd, 7, 0x0021);
++ write_reg(lcd, 8, 0x0c00);
++ write_reg(lcd, 10, 0x0103);
++ write_reg(lcd, 11, 0x0301);
++ write_reg(lcd, 12, 0x1f0f);
++ write_reg(lcd, 13, 0x1f0f);
++ write_reg(lcd, 14, 0x0707);
++ write_reg(lcd, 15, 0x0307);
++ write_reg(lcd, 16, 0x0707);
++ write_reg(lcd, 17, 0x0000);
++ write_reg(lcd, 18, 0x0004);
++ write_reg(lcd, 19, 0x0000);
++
++ msleep(20);
++ write_reg(lcd, 9, 0x4a55);
++ write_reg(lcd, 5, 0x5003);
++
++out:
++ return ret;
++}
++
++static int ltv350qv_power_off(struct ltv350qv *lcd)
++{
++ int ret;
++
++ /* GON -> 0, POC -> 0 */
++ write_reg(lcd, 9, 0x4055);
++ /* DSC -> 0 */
++ write_reg(lcd, 5, 0x4003);
++ /* VCOMG -> 0 */
++ write_reg(lcd, 10, 0x2103);
++
++ msleep(1);
++
++ /* AP[2:0] -> 000 */
++ write_reg(lcd, 9, 0x4050);
++
++out:
++ return ret;
++}
++
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
++{
++ int ret = 0;
++
++ down(&lcd->lock);
++
++ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_on(lcd);
++ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_off(lcd);
++
++ if (!ret)
++ lcd->power = power;
++
++ up(&lcd->lock);
++
++ return ret;
++}
++
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
++{
++ struct ltv350qv *lcd;
++
++ lcd = class_get_devdata(&ld->class_dev);
++ return ltv350qv_power(lcd, power);
++}
++
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++ struct ltv350qv *lcd;
++
++ lcd = class_get_devdata(&ld->class_dev);
++ return lcd->power;
++}
++
++static struct lcd_properties lcd_properties = {
++ .owner = THIS_MODULE,
++ .get_power = ltv350qv_get_power,
++ .set_power = ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++ struct ltv350qv *lcd;
++ struct lcd_device *ld;
++ int ret;
++
++ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++ if (!lcd)
++ return -ENOMEM;
++
++ lcd->spi = spi;
++ lcd->power = FB_BLANK_POWERDOWN;
++ init_MUTEX(&lcd->lock);
++ lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++ spi->mode = SPI_MODE_3;
++ spi->bits_per_word = 8;
++ ret = spi_setup(spi);
++ if (ret)
++ goto out_free_lcd;
++
++ ld = lcd_device_register("ltv350qv", lcd, &lcd_properties);
++ if (IS_ERR(ld)) {
++ ret = PTR_ERR(ld);
++ goto out_free_lcd;
++ }
++ lcd->ld = ld;
++
++ list_add(&lcd->list, &lcd_list);
++
++ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ if (ret)
++ goto out_unregister;
++
++ dev_set_drvdata(&spi->dev, lcd);
++
++ return 0;
++
++out_unregister:
++ lcd_device_unregister(ld);
++out_free_lcd:
++ kfree(lcd);
++ return ret;
++}
++
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ list_del(&lcd->list);
++ lcd_device_unregister(lcd->ld);
++ kfree(lcd);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int ltv350qv_suspend(struct spi_device *spi,
++ pm_message_t state, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == SUSPEND_POWER_DOWN)
++ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++
++ return 0;
++}
++
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == RESUME_POWER_ON)
++ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++
++ return 0;
++}
++#else
++#define ltv350qv_suspend NULL
++#define ltv350qv_resume NULL
++#endif
++
++/* Power down all displays on reboot, poweroff or halt */
++static int ltv350qv_halt(struct notifier_block *nb, unsigned long event,
++ void *p)
++{
++ struct ltv350qv *lcd;
++
++ list_for_each_entry(lcd, &lcd_list, list) {
++ if (!lcd->halt_done)
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ lcd->halt_done = 1;
++ }
++
++ return NOTIFY_OK;
++}
++
++static struct spi_driver ltv350qv_driver = {
++ .driver = {
++ .name = "ltv350qv",
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++
++ .probe = ltv350qv_probe,
++ .remove = __devexit_p(ltv350qv_remove),
++ .suspend = ltv350qv_suspend,
++ .resume = ltv350qv_resume,
++};
++
++static struct notifier_block ltv350qv_notifier = {
++ .notifier_call = ltv350qv_halt,
++};
++
++static int __init ltv350qv_init(void)
++{
++ register_reboot_notifier(&ltv350qv_notifier);
++ return spi_register_driver(&ltv350qv_driver);
++}
++
++static void __exit ltv350qv_exit(void)
++{
++ unregister_reboot_notifier(&ltv350qv_notifier);
++ spi_unregister_driver(&ltv350qv_driver);
++}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
++
++MODULE_AUTHOR("Atmel Norway");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/Makefile linux-2.6.20.4-atmel/drivers/video/backlight/Makefile
+--- linux-2.6.20.4-0rig/drivers/video/backlight/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/backlight/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
+ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
+diff -urN linux-2.6.20.4-0rig/drivers/video/fbmem.c linux-2.6.20.4-atmel/drivers/video/fbmem.c
+--- linux-2.6.20.4-0rig/drivers/video/fbmem.c 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/fbmem.c 2007-03-24 16:42:29.000000000 +0100
+@@ -1199,6 +1199,10 @@
+ pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
+ #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
++#elif defined(__avr32__)
++ vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
++ & ~_PAGE_CACHABLE)
++ | (_PAGE_BUFFER | _PAGE_DIRTY));
+ #elif defined(__ia64__)
+ if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+diff -urN linux-2.6.20.4-0rig/drivers/video/Kconfig linux-2.6.20.4-atmel/drivers/video/Kconfig
+--- linux-2.6.20.4-0rig/drivers/video/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -276,6 +276,28 @@
+ If you plan to use the LCD display with your SA-1100 system, say
+ Y here.
+
++config FB_SIDSA
++ tristate "SIDSA LCDC support"
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ depends on FB && AVR32
++ help
++ This enables support for the SIDSA LCD Controller.
++
++config FB_SIDSA_DEFAULT_BPP
++ int "SIDSA LCDC default color depth"
++ default 24
++ depends on FB_SIDSA
++ help
++ Specify the maximum color depth you want to be able to
++ support. This, together with the resolution of the LCD
++ panel, determines the amount of framebuffer memory allocated
++ when the driver is initialized.
++
++ Allowable values are 1, 2, 4, 8, 16, 24 and 32. If unsure,
++ say 24.
++
+ config FB_IMX
+ tristate "Motorola i.MX LCD support"
+ depends on FB && ARM && ARCH_IMX
+@@ -698,6 +720,22 @@
+ working with S1D13806). Product specs at
+ <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+
++config FB_ATMEL
++ tristate "AT91/AT32 LCD Controller support"
++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ help
++ This enables support for the AT91/AT32 LCD Controller.
++
++config FB_INTSRAM
++ bool "Frame Buffer in internal SRAM"
++ depends on FB_ATMEL && ARCH_AT91SAM9261
++ help
++ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
++ to let frame buffer in external SDRAM.
++
+ config FB_NVIDIA
+ tristate "nVidia Framebuffer Support"
+ depends on FB && PCI
+diff -urN linux-2.6.20.4-0rig/drivers/video/Makefile linux-2.6.20.4-atmel/drivers/video/Makefile
+--- linux-2.6.20.4-0rig/drivers/video/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -78,6 +78,7 @@
+ obj-$(CONFIG_FB_SUN3) += sun3fb.o
+ obj-$(CONFIG_FB_HIT) += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
+ obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+@@ -100,6 +101,7 @@
+ obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
+ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
+ obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
++obj-$(CONFIG_FB_SIDSA) += sidsafb.o
+
+ # Platform or fallback drivers go here
+ obj-$(CONFIG_FB_VESA) += vesafb.o
+diff -urN linux-2.6.20.4-0rig/drivers/video/sidsafb.c linux-2.6.20.4-atmel/drivers/video/sidsafb.c
+--- linux-2.6.20.4-0rig/drivers/video/sidsafb.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/drivers/video/sidsafb.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,860 @@
++/*
++ * Framebuffer Driver for Atmel/SIDSA LCD Controller
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#undef DEBUG
++
++#include <linux/clk.h>
++#include <linux/completion.h>
++#include <linux/kernel.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++
++#include <asm/arch/board.h>
++
++#include <asm/periph/lcdc.h>
++
++/* More or less configurable parameters */
++#define SIDSAFB_FIFO_SIZE 512
++#define SIDSAFB_DMA_BURST_LEN 8
++
++/* TODO: These should be autogenerated from part description file */
++#define LCDC_DISTYPE_STN_MONO 0
++#define LCDC_DISTYPE_STN_COLOR 1
++#define LCDC_DISTYPE_TFT 2
++#define LCDC_LUT 0xc00
++
++struct sidsafb_info {
++ spinlock_t lock;
++ struct fb_info * info;
++ void __iomem * regs;
++ unsigned long irq_base;
++ int wait_for_vsync;
++ struct completion vsync_complete;
++ unsigned int guard_time;
++ struct clk *hclk;
++ struct clk *pixclk;
++ struct platform_device *pdev;
++ u32 pseudo_palette[16];
++};
++
++/*
++ * How large framebuffer to allocate if none was provided by the
++ * platform. This default is the smallest we can possibly get away
++ * with.
++ */
++static unsigned long fb_size = (320 * 240);
++
++#if 0
++static struct fb_videomode sony_modes[] = {
++ {
++ .refresh = 48,
++ .xres = 240, .yres = 160,
++ .pixclock = 520833,
++
++ .left_margin = 7, .right_margin = 9,
++ .upper_margin = 19, .lower_margin = 20,
++ .hsync_len = 9, .vsync_len = 2,
++
++ .sync = 0,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++#endif
++
++#if 0
++static struct fb_videomode vga_modes[] = {
++ {
++ .refresh = 122,
++ .xres = 320, .yres = 240,
++ .pixclock = 80000,
++
++ .left_margin = 10, .right_margin = 20,
++ .upper_margin = 30, .lower_margin = 5,
++ .hsync_len = 20, .vsync_len = 3,
++
++ .sync = 0,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++ {
++ .refresh = 70,
++ .xres = 640, .yres = 480,
++ .pixclock = 40000,
++
++ .left_margin = 10, .right_margin = 20,
++ .upper_margin = 30, .lower_margin = 5,
++ .hsync_len = 20, .vsync_len = 3,
++
++ .sync = 0,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++#else
++static struct fb_videomode samsung_modes[] = {
++ {
++ .refresh = 75,
++ .xres = 320, .yres = 240,
++ .pixclock = 145111,
++
++ .left_margin = 17, .right_margin = 33,
++ .upper_margin = 10, .lower_margin = 10,
++ .hsync_len = 16, .vsync_len = 1,
++
++ .sync = FB_SYNC_PCLK_RISING,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++#endif
++
++#if 1
++static struct fb_monspecs default_monspecs = {
++ .modedb = samsung_modes,
++ .manufacturer = "SNG",
++ .monitor = "LCD panel",
++ .serial_no = "xxxx",
++ .ascii = "yyyy",
++ .modedb_len = ARRAY_SIZE(samsung_modes),
++ .hfmin = 14820,
++ .hfmax = 22230,
++ .vfmin = 60,
++ .vfmax = 90,
++ .dclkmax = 30000000,
++};
++#endif
++
++#if 0
++static struct fb_monspecs default_monspecs = {
++ .modedb = sony_modes,
++ .manufacturer = "SNY", /* 4 chars?!? */
++ .monitor = "LCD panel",
++ .serial_no = "xxxx",
++ .ascii = "yyyy",
++ .modedb_len = ARRAY_SIZE(sony_modes),
++ .hfmin = 7000,
++ .hfmax = 8000,
++ .vfmin = 45,
++ .vfmax = 50,
++};
++// #else
++static struct fb_monspecs default_monspecs = {
++ .modedb = vga_modes,
++ .manufacturer = "VGA",
++ .monitor = "Generic VGA",
++ .serial_no = "xxxx",
++ .ascii = "yyyy",
++ .modedb_len = ARRAY_SIZE(vga_modes),
++ .hfmin = 30000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++#endif
++
++/* Driver defaults */
++static struct fb_fix_screeninfo sidsafb_fix __devinitdata = {
++ .id = "sidsafb",
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_TRUECOLOR,
++ .xpanstep = 1,
++ .ypanstep = 1,
++ .ywrapstep = 0,
++ .accel = FB_ACCEL_NONE,
++};
++
++/*
++ * Let the user decide whether FBIOPAN_DISPLAY waits for the next
++ * vsync or not.
++ */
++static ssize_t
++vsync_pan_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct fb_info *info = dev_get_drvdata(dev);
++ struct sidsafb_info *sinfo = info->par;
++
++ return sprintf(buf, "%d\n", sinfo->wait_for_vsync);
++}
++
++static ssize_t
++vsync_pan_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct fb_info *info = dev_get_drvdata(dev);
++ struct sidsafb_info *sinfo = info->par;
++ unsigned long val;
++
++ val = simple_strtoul(buf, NULL, 0);
++ if (val)
++ sinfo->wait_for_vsync = 1;
++ else
++ sinfo->wait_for_vsync = 0;
++
++ return count;
++}
++
++static DEVICE_ATTR(vsync_pan, 0644, vsync_pan_show, vsync_pan_store);
++
++static void sidsafb_update_dma(struct fb_info *info,
++ struct fb_var_screeninfo *var)
++{
++ struct sidsafb_info *sinfo = info->par;
++ struct fb_fix_screeninfo *fix = &info->fix;
++ unsigned long dma_addr;
++ unsigned long pixeloff;
++ unsigned long dma2dcfg;
++
++ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
++ + var->xoffset * var->bits_per_pixel / 8);
++
++ dma_addr &= ~3UL;
++ pixeloff = LCDC_MKBF(DMA2DCFG_PIXELOFF, var->xoffset * var->bits_per_pixel);
++
++ /* Set framebuffer DMA base address and pixel offset */
++ lcdc_writel(sinfo, DMABADDR1, dma_addr);
++ dma2dcfg = lcdc_readl(sinfo, DMA2DCFG);
++ dma2dcfg = LCDC_INSBF(DMA2DCFG_PIXELOFF, pixeloff, dma2dcfg);
++ lcdc_writel(sinfo, DMA2DCFG, dma2dcfg);
++
++ /* Update configuration */
++ lcdc_writel(sinfo, DMACON, (lcdc_readl(sinfo, DMACON)
++ | LCDC_BIT(DMACON_DMAUPDT)));
++}
++
++/**
++ * sidsafb_check_var - Validates a var passed in.
++ * @var: frame buffer variable screen structure
++ * @info: frame buffer structure that represents a single frame buffer
++ *
++ * Checks to see if the hardware supports the state requested by
++ * var passed in. This function does not alter the hardware
++ * state!!! This means the data stored in struct fb_info and
++ * struct sidsafb_info do not change. This includes the var
++ * inside of struct fb_info. Do NOT change these. This function
++ * can be called on its own if we intent to only test a mode and
++ * not actually set it. The stuff in modedb.c is a example of
++ * this. If the var passed in is slightly off by what the
++ * hardware can support then we alter the var PASSED in to what
++ * we can do. If the hardware doesn't support mode change a
++ * -EINVAL will be returned by the upper layers. You don't need
++ * to implement this function then. If you hardware doesn't
++ * support changing the resolution then this function is not
++ * needed. In this case the driver would just provide a var that
++ * represents the static state the screen is in.
++ *
++ * Returns negative errno on error, or zero on success.
++ */
++static int sidsafb_check_var(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ unsigned long new_fb_size;
++
++ pr_debug("sidsafb_check_var:\n");
++ pr_debug(" resolution: %ux%u\n", var->xres, var->yres);
++ pr_debug(" pixclk: %llu Hz\n", 1000000000000ULL / var->pixclock);
++ pr_debug(" bpp: %u\n", var->bits_per_pixel);
++
++ new_fb_size = (var->xres_virtual * var->yres_virtual
++ * ((var->bits_per_pixel + 7) / 8));
++ if (new_fb_size > info->fix.smem_len) {
++ printk(KERN_NOTICE
++ "sidsafb: %uB framebuffer too small for %ux%ux%u\n",
++ info->fix.smem_len, var->xres_virtual,
++ var->yres_virtual, var->bits_per_pixel);
++ return -EINVAL;
++ }
++
++ /* Force same alignment for each line */
++ var->xres = (var->xres + 3) & ~3UL;
++ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
++
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
++ var->transp.offset = var->transp.length = 0;
++
++ switch (var->bits_per_pixel) {
++ case 2:
++ case 4:
++ case 8:
++ var->red.offset = var->green.offset = var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length
++ = var->bits_per_pixel;
++ break;
++ case 15:
++ case 16:
++ /*
++ * Bit 16 is the "intensity" bit, I think. Not sure
++ * what we're going to use that for...
++ */
++ var->red.offset = 0;
++ var->green.offset = 5;
++ var->blue.offset = 10;
++ var->red.length = 5;
++ var->green.length = 5;
++ var->blue.length = 5;
++ break;
++ case 32:
++ var->transp.offset = 24;
++ var->transp.length = 8;
++ /* fall through */
++ case 24:
++ var->red.offset = 16;
++ var->green.offset = 8;
++ var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length = 8;
++ break;
++ default:
++ printk(KERN_NOTICE "sidsafb: color depth %d not supported\n",
++ var->bits_per_pixel);
++ return -EINVAL;
++ }
++
++ var->xoffset = var->yoffset = 0;
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
++ var->transp.msb_right = 0;
++
++ return 0;
++}
++
++/**
++ * sidsafb_set_par - Alters the hardware state.
++ * @info: frame buffer structure that represents a single frame buffer
++ *
++ * Using the fb_var_screeninfo in fb_info we set the resolution
++ * of the this particular framebuffer. This function alters the
++ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
++ * not alter var in fb_info since we are using that data. This
++ * means we depend on the data in var inside fb_info to be
++ * supported by the hardware. sidsafb_check_var is always called
++ * before sidsafb_set_par to ensure this. Again if you can't
++ * change the resolution you don't need this function.
++ *
++ */
++static int sidsafb_set_par(struct fb_info *info)
++{
++ struct sidsafb_info *sinfo = info->par;
++ unsigned long value;
++
++ pr_debug("sidsafb_set_par:\n");
++ pr_debug(" * resolution: %ux%u (%ux%u virtual)\n",
++ info->var.xres, info->var.yres,
++ info->var.xres_virtual, info->var.yres_virtual);
++
++ /* Turn off the LCD controller and the DMA controller */
++ pr_debug("writing 0x%08x to %p\n",
++ LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time),
++ sinfo->regs + LCDC_PWRCON);
++ lcdc_writel(sinfo, PWRCON,
++ LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time));
++ pr_debug("writing 0 to %p\n", sinfo->regs + LCDC_DMACON);
++ lcdc_writel(sinfo, DMACON, 0);
++
++ info->fix.line_length = (info->var.xres_virtual
++ * (info->var.bits_per_pixel / 8));
++
++ if (info->var.bits_per_pixel <= 8)
++ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++ else
++ info->fix.visual = FB_VISUAL_TRUECOLOR;
++
++ /* Re-initialize the DMA engine... */
++ pr_debug(" * update DMA engine\n");
++ sidsafb_update_dma(info, &info->var);
++
++ /* ...set frame size and burst length = 8 words (?) */
++ value = LCDC_MKBF(DMAFRMCFG_FRMSIZE,
++ (info->var.yres * info->fix.line_length + 3) / 4);
++ value |= LCDC_MKBF(DMAFRMCFG_BRSTLEN, (SIDSAFB_DMA_BURST_LEN - 1));
++ lcdc_writel(sinfo, DMAFRMCFG, value);
++
++ /* ...set 2D configuration (necessary for xres_virtual != xres) */
++ value = LCDC_MKBF(DMA2DCFG_ADDRINC,
++ info->var.xres_virtual - info->var.xres);
++ lcdc_writel(sinfo, DMA2DCFG, value);
++
++ /* ...wait for DMA engine to become idle... */
++ while (lcdc_readl(sinfo, DMACON) & LCDC_BIT(DMACON_DMABUSY))
++ msleep(10);
++
++ pr_debug(" * re-enable DMA engine\n");
++ /* ...and enable it with updated configuration */
++ lcdc_writel(sinfo, DMACON, (LCDC_BIT(DMACON_DMAEN)
++ | LCDC_BIT(DMACON_DMAUPDT)
++ | LCDC_BIT(DMACON_DMA2DEN)));
++
++ /* Now, the LCD core... */
++
++ /* Set pixel clock. */
++ value = (clk_get_rate(sinfo->pixclk) / 100000) * info->var.pixclock;
++ value /= 10000000;
++ value = (value + 1) / 2;
++ if (value == 0) {
++ printk("sidsafb: Bypassing lcdc_pclk divider\n");
++ lcdc_writel(sinfo, LCDCON1, LCDC_BIT(LCDCON1_BYPASS));
++ } else {
++ lcdc_writel(sinfo, LCDCON1, LCDC_MKBF(LCDCON1_CLKVAL, value - 1));
++ }
++
++ /* Initialize control register 2 */
++ value = (LCDC_BIT(LCDCON2_CLKMOD)
++ | LCDC_MKBF(LCDCON2_DISTYPE, LCDC_DISTYPE_TFT));
++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++ value |= LCDC_BIT(LCDCON2_INVLINE);
++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++ value |= LCDC_BIT(LCDCON2_INVFRAME);
++ if (info->var.sync & FB_SYNC_PCLK_RISING)
++ value |= LCDC_BIT(LCDCON2_INVCLK);
++
++ switch (info->var.bits_per_pixel) {
++ case 1: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 0); break;
++ case 2: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 1); break;
++ case 4: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 2); break;
++ case 8: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 3); break;
++ case 15: /* fall through */
++ case 16: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 4); break;
++ case 24: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 5); break;
++ case 32: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 6); break;
++ default: BUG(); break;
++ }
++ pr_debug(" * LCDCON2 = %08lx\n", value);
++ lcdc_writel(sinfo, LCDCON2, value);
++
++ /* Vertical timing */
++ value = LCDC_MKBF(LCDTIM1_VPW, info->var.vsync_len - 1);
++ value |= LCDC_MKBF(LCDTIM1_VBP, info->var.upper_margin);
++ value |= LCDC_MKBF(LCDTIM1_VFP, info->var.lower_margin);
++ pr_debug(" * LCDTIM1 = %08lx\n", value);
++ lcdc_writel(sinfo, LCDTIM1, value);
++
++ /* Horizontal timing */
++ value = LCDC_MKBF(LCDTIM2_HFP, info->var.right_margin - 1);
++ value |= LCDC_MKBF(LCDTIM2_HPW, info->var.hsync_len - 1);
++ value |= LCDC_MKBF(LCDTIM2_HBP, info->var.left_margin - 1);
++ pr_debug(" * LCDTIM2 = %08lx\n", value);
++ lcdc_writel(sinfo, LCDTIM2, value);
++
++ /* Display size */
++ value = LCDC_MKBF(LCDFRMCFG_LINESIZE, info->var.xres - 1);
++ value |= LCDC_MKBF(LCDFRMCFG_LINEVAL, info->var.yres - 1);
++ lcdc_writel(sinfo, LCDFRMCFG, value);
++
++ /* FIFO Threshold: Use formula from data sheet */
++ value = SIDSAFB_FIFO_SIZE - (2 * SIDSAFB_DMA_BURST_LEN + 3);
++ lcdc_writel(sinfo, LCDFIFO, value);
++
++ /* Toggle LCD_MODE every frame */
++ lcdc_writel(sinfo, LCDMVAL, 0);
++
++ /* Disable all interrupts */
++ lcdc_writel(sinfo, LCD_IDR, ~0UL);
++
++ /* Wait for the LCDC core to become idle and enable it */
++ while(lcdc_readl(sinfo, PWRCON) & LCDC_BIT(PWRCON_LCD_BUSY))
++ msleep(10);
++
++ pr_debug(" * re-enable LCD core\n");
++ lcdc_writel(sinfo, PWRCON,
++ LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time)
++ | LCDC_BIT(PWRCON_LCD_PWR));
++
++ pr_debug(" * DONE\n");
++ return 0;
++}
++
++static inline u_int chan_to_field(u_int chan, const struct fb_bitfield *bf)
++{
++ chan &= 0xffff;
++ chan >>= 16 - bf->length;
++ return chan << bf->offset;
++}
++
++/**
++ * sidsafb_setcolreg - Optional function. Sets a color register.
++ * @regno: Which register in the CLUT we are programming
++ * @red: The red value which can be up to 16 bits wide
++ * @green: The green value which can be up to 16 bits wide
++ * @blue: The blue value which can be up to 16 bits wide.
++ * @transp: If supported the alpha value which can be up to 16 bits wide.
++ * @info: frame buffer info structure
++ *
++ * Set a single color register. The values supplied have a 16 bit
++ * magnitude which needs to be scaled in this function for the hardware.
++ * Things to take into consideration are how many color registers, if
++ * any, are supported with the current color visual. With truecolor mode
++ * no color palettes are supported. Here a psuedo palette is created
++ * which we store the value in pseudo_palette in struct fb_info. For
++ * pseudocolor mode we have a limited color palette. To deal with this
++ * we can program what color is displayed for a particular pixel value.
++ * DirectColor is similar in that we can program each color field. If
++ * we have a static colormap we don't need to implement this function.
++ *
++ * Returns negative errno on error, or zero on success. In an
++ * ideal world, this would have been the case, but as it turns
++ * out, the other drivers return 1 on failure, so that's what
++ * we're going to do.
++ */
++static int sidsafb_setcolreg(unsigned int regno, unsigned int red,
++ unsigned int green, unsigned int blue,
++ unsigned int transp, struct fb_info *info)
++{
++ struct sidsafb_info *sinfo = info->par;
++ unsigned int val;
++ u32 *pal;
++ int ret = 1;
++
++ if (info->var.grayscale)
++ red = green = blue = (19595 * red + 38470 * green
++ + 7471 * blue) >> 16;
++
++ switch (info->fix.visual) {
++ case FB_VISUAL_TRUECOLOR:
++ if (regno < 16) {
++ pal = info->pseudo_palette;
++
++ val = chan_to_field(red, &info->var.red);
++ val |= chan_to_field(green, &info->var.green);
++ val |= chan_to_field(blue, &info->var.blue);
++
++ pal[regno] = val;
++ ret = 0;
++ }
++ break;
++
++ case FB_VISUAL_PSEUDOCOLOR:
++ if (regno < 256) {
++ val = ((red >> 11) & 0x001f);
++ val |= ((green >> 6) & 0x03e0);
++ val |= ((blue >> 1) & 0x7c00);
++
++ /*
++ * TODO: intensity bit. Maybe something like
++ * ~(red[10] ^ green[10] ^ blue[10]) & 1
++ */
++
++ lcdc_writel(sinfo, LUT + regno * 4, val);
++ ret = 0;
++ }
++ break;
++ }
++
++ return ret;
++}
++
++static int sidsafb_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ struct sidsafb_info *sinfo = info->par;
++
++ pr_debug("sidsafb_pan_display\n");
++
++ sidsafb_update_dma(info, var);
++
++ if (sinfo->wait_for_vsync) {
++ spin_lock_irq(&sinfo->lock);
++ lcdc_writel(sinfo, LCD_ICR, LCDC_BIT(LCD_ICR_EOFIC));
++ lcdc_writel(sinfo, LCD_IER, LCDC_BIT(LCD_IER_EOFIE));
++ init_completion(&sinfo->vsync_complete);
++ lcdc_readl(sinfo, LCD_IMR);
++ spin_unlock_irq(&sinfo->lock);
++
++ wait_for_completion(&sinfo->vsync_complete);
++
++ lcdc_writel(sinfo, LCD_IDR, LCDC_BIT(LCD_IDR_EOFID));
++ }
++
++ return 0;
++}
++
++static struct fb_ops sidsafb_ops = {
++ .owner = THIS_MODULE,
++ .fb_check_var = sidsafb_check_var,
++ .fb_set_par = sidsafb_set_par,
++ .fb_setcolreg = sidsafb_setcolreg,
++ .fb_pan_display = sidsafb_pan_display,
++ .fb_fillrect = cfb_fillrect,
++ .fb_copyarea = cfb_copyarea,
++ .fb_imageblit = cfb_imageblit,
++};
++
++static irqreturn_t sidsafb_interrupt(int irq, void *dev_id)
++{
++ struct fb_info *info = dev_id;
++ struct sidsafb_info *sinfo = info->par;
++ u32 status;
++
++ status = lcdc_readl(sinfo, LCD_ISR);
++ while (status) {
++ if (status & LCDC_BIT(LCD_ISR_EOFIS)) {
++ pr_debug("sidsafb: DMA End Of Frame interrupt\n");
++
++ lcdc_writel(sinfo, LCD_ICR, LCDC_BIT(LCD_ICR_EOFIC));
++ status &= ~LCDC_BIT(LCD_ISR_EOFIS);
++ complete(&sinfo->vsync_complete);
++ }
++
++ if (status) {
++ printk(KERN_ERR
++ "LCDC: Interrupts still pending: 0x%x\n",
++ status);
++ lcdc_writel(sinfo, LCD_IDR, status);
++ }
++
++ status = lcdc_readl(sinfo, LCD_ISR);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static void __devinit init_pseudo_palette(u32 *palette)
++{
++ static const u32 init_palette[16] = {
++ 0x000000,
++ 0xaa0000,
++ 0x00aa00,
++ 0xaa5500,
++ 0x0000aa,
++ 0xaa00aa,
++ 0x00aaaa,
++ 0xaaaaaa,
++ 0x555555,
++ 0xff5555,
++ 0x55ff55,
++ 0xffff55,
++ 0x5555ff,
++ 0xff55ff,
++ 0x55ffff,
++ 0xffffff
++ };
++
++ memcpy(palette, init_palette, sizeof(init_palette));
++}
++
++static int __devinit sidsafb_set_fbinfo(struct sidsafb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++
++ init_pseudo_palette(sinfo->pseudo_palette);
++
++ info->flags = (FBINFO_DEFAULT
++ | FBINFO_PARTIAL_PAN_OK
++ | FBINFO_HWACCEL_XPAN
++ | FBINFO_HWACCEL_YPAN);
++ memcpy(&info->fix, &sidsafb_fix, sizeof(info->fix));
++ memcpy(&info->monspecs, &default_monspecs, sizeof(info->monspecs));
++ info->fbops = &sidsafb_ops;
++ info->pseudo_palette = sinfo->pseudo_palette;
++
++ return 0;
++}
++
++static int __devinit sidsafb_probe(struct platform_device *pdev)
++{
++ struct lcdc_platform_data *fb_data = pdev->dev.platform_data;
++ struct fb_info *info;
++ struct sidsafb_info *sinfo;
++ const struct resource *mmio_resource;
++ int ret;
++
++ pr_debug("sidsafb_probe BEGIN\n");
++
++ mmio_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!mmio_resource) {
++ dev_err(&pdev->dev, "no MMIO resource found\n");
++ return -ENXIO;
++ }
++
++ ret = -ENOMEM;
++ info = framebuffer_alloc(sizeof(struct sidsafb_info), &pdev->dev);
++ if (!info) {
++ dev_err(&pdev->dev, "failed to allocate memory\n");
++ goto out;
++ }
++
++ sinfo = info->par;
++ sinfo->info = info;
++ sinfo->pdev = pdev;
++ sinfo->guard_time = 1;
++
++ spin_lock_init(&sinfo->lock);
++ sidsafb_set_fbinfo(sinfo);
++ info->fix.mmio_start = mmio_resource->start;
++ info->fix.mmio_len = mmio_resource->end - mmio_resource->start + 1;
++ sinfo->irq_base = platform_get_irq(pdev, 0);
++
++ sinfo->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(sinfo->hclk)) {
++ dev_err(&pdev->dev, "failed to get hclk\n");
++ ret = PTR_ERR(sinfo->hclk);
++ goto free_info;
++ }
++ sinfo->pixclk = clk_get(&pdev->dev, "pixclk");
++ if (IS_ERR(sinfo->pixclk)) {
++ dev_err(&pdev->dev, "failed to get pixel clock\n");
++ ret = PTR_ERR(sinfo->hclk);
++ goto put_hclk;
++ }
++
++ clk_enable(sinfo->hclk);
++ clk_enable(sinfo->pixclk);
++
++ /* Use platform-supplied framebuffer memory if available */
++ if (fb_data && fb_data->fbmem_size != 0) {
++ info->fix.smem_start = fb_data->fbmem_start;
++ info->fix.smem_len = fb_data->fbmem_size;
++ info->screen_base = ioremap(info->fix.smem_start,
++ info->fix.smem_len);
++ } else {
++ dma_addr_t paddr;
++
++ info->fix.smem_len = fb_size;
++ info->screen_base = dma_alloc_coherent(&pdev->dev, fb_size,
++ &paddr, GFP_KERNEL);
++ info->fix.smem_start = paddr;
++ }
++
++ if (!info->screen_base) {
++ printk(KERN_ERR "sidsafb: Could not allocate framebuffer\n");
++ goto disable_clocks;
++ }
++
++ sinfo->regs = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++ if (!sinfo->regs) {
++ printk(KERN_ERR "sidsafb: Could not map LCDC registers\n");
++ goto free_fb;
++ }
++
++ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
++ info->monspecs.modedb_len, info->monspecs.modedb,
++ CONFIG_FB_SIDSA_DEFAULT_BPP);
++ if (!ret) {
++ printk(KERN_ERR "sidsafb: No suitable video mode found\n");
++ goto unmap_regs;
++ }
++
++ ret = request_irq(sinfo->irq_base, sidsafb_interrupt, 0,
++ "sidsafb", info);
++ if (ret)
++ goto unmap_regs;
++
++ /* Allocate colormap */
++ if (fb_alloc_cmap(&info->cmap, 256, 0)) {
++ ret = -ENOMEM;
++ goto unregister_irqs;
++ }
++
++ platform_set_drvdata(pdev, info);
++ ret = device_create_file(&pdev->dev, &dev_attr_vsync_pan);
++ if (ret)
++ goto free_cmap;
++
++ /*
++ * Tell the world that we're ready to go
++ */
++ ret = register_framebuffer(info);
++ if (ret)
++ goto remove_attrs;
++
++ printk("fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
++ info->node, info->fix.mmio_start, sinfo->regs, sinfo->irq_base);
++
++ memset_io(info->screen_base, 0, info->fix.smem_len);
++ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
++ ret = fb_set_var(info, &info->var);
++ if (ret)
++ printk(KERN_WARNING
++ "sidsafb: Unable to set display parameters\n");
++ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
++
++ pr_debug("sidsafb_probe SUCCESS\n");
++ return 0;
++
++
++remove_attrs:
++ device_remove_file(&pdev->dev, &dev_attr_vsync_pan);
++free_cmap:
++ fb_dealloc_cmap(&info->cmap);
++unregister_irqs:
++ free_irq(sinfo->irq_base, info);
++unmap_regs:
++ iounmap(sinfo->regs);
++free_fb:
++ if (!fb_data || fb_data->fbmem_size == 0)
++ dma_free_coherent(&pdev->dev, info->fix.smem_len,
++ (void __force *)info->screen_base,
++ info->fix.smem_start);
++disable_clocks:
++ clk_disable(sinfo->pixclk);
++ clk_disable(sinfo->hclk);
++ clk_put(sinfo->pixclk);
++put_hclk:
++ clk_put(sinfo->hclk);
++free_info:
++ framebuffer_release(info);
++out:
++ pr_debug("sidsafb_probe FAILED\n");
++ return ret;
++}
++
++static int __devexit sidsafb_remove(struct platform_device *pdev)
++{
++ struct lcdc_platform_data *fb_data = pdev->dev.platform_data;
++ struct fb_info *info = platform_get_drvdata(pdev);
++ struct sidsafb_info *sinfo;
++
++ if (!info)
++ return 0;
++ sinfo = info->par;
++
++ /* TODO: Restore original state */
++ unregister_framebuffer(info);
++
++ device_remove_file(&pdev->dev, &dev_attr_vsync_pan);
++
++ fb_dealloc_cmap(&info->cmap);
++ free_irq(sinfo->irq_base, info);
++ iounmap(sinfo->regs);
++ if (!fb_data || fb_data->fbmem_size == 0)
++ dma_free_coherent(&pdev->dev, info->fix.smem_len,
++ (void __force *)info->screen_base,
++ info->fix.smem_start);
++ clk_disable(sinfo->hclk);
++ clk_put(sinfo->hclk);
++ platform_set_drvdata(pdev, NULL);
++ framebuffer_release(info);
++
++ return 0;
++}
++
++static struct platform_driver sidsafb_driver = {
++ .probe = sidsafb_probe,
++ .remove = __devexit_p(sidsafb_remove),
++ .driver = {
++ .name = "lcdc",
++ },
++};
++
++int __init sidsafb_init(void)
++{
++ return platform_driver_register(&sidsafb_driver);
++}
++
++static void __exit sidsafb_exit(void)
++{
++ platform_driver_unregister(&sidsafb_driver);
++}
++
++module_init(sidsafb_init);
++module_exit(sidsafb_exit);
++
++module_param(fb_size, ulong, 0644);
++MODULE_PARM_DESC(fb_size, "Minimum framebuffer size to allocate");
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Atmel/SIDSA LCD Controller framebuffer driver");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_dbgu.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_dbgu.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_dbgu.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_dbgu.h 2007-03-24 16:39:15.000000000 +0100
+@@ -35,6 +35,20 @@
+ #define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
+ #define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
+ #define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
++#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
++#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
++#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
++#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
++#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
++#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
++#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
++#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
++#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
++#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
++#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
++#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
++#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
++#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
+ #define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
+ #define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
+ #define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_mci.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_mci.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_mci.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_mci.h 2007-03-24 16:39:15.000000000 +0100
+@@ -26,6 +26,9 @@
+ #define AT91_MCI_MR 0x04 /* Mode Register */
+ #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
+ #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
++#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
++#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
++#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
+ #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
+ #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
+ #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_pdc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_pdc.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_pdc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_pdc.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,36 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91_pdc.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * Peripheral Data Controller (PDC) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91_PDC_H
+-#define AT91_PDC_H
+-
+-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
+-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
+-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
+-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
+-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
+-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+-
+-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
+-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+-
+-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
+-
+-#endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_rstc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_rstc.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_rstc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_rstc.h 2007-03-24 16:39:16.000000000 +0100
+@@ -17,7 +17,7 @@
+ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
+ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
+ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
+-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
++#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
+
+ #define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
+ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
+@@ -34,6 +34,5 @@
+ #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
+ #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
+ #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
+-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
+
+ #endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260.h 2007-03-24 16:39:16.000000000 +0100
+@@ -113,6 +113,10 @@
+
+ #define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
+
++#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
++#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
++
++
+ #if 0
+ /*
+ * PIO pin definitions (peripheral A/B multiplexing).
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h 2007-03-24 16:39:16.000000000 +0100
+@@ -18,7 +18,7 @@
+ #define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+ #define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+ #define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
++#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+ #define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+ #define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263.h 2007-03-24 16:39:16.000000000 +0100
+@@ -0,0 +1,131 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam9263.h
++ *
++ * (C) 2007 Atmel Corporation.
++ *
++ * Common definitions.
++ * Based on AT91SAM9263 datasheet revision B (Preliminary).
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM9263_H
++#define AT91SAM9263_H
++
++/*
++ * Peripheral identifiers/interrupts.
++ */
++#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
++#define AT91_ID_SYS 1 /* System Peripherals */
++#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
++#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
++#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
++#define AT91SAM9263_ID_US0 7 /* USART 0 */
++#define AT91SAM9263_ID_US1 8 /* USART 1 */
++#define AT91SAM9263_ID_US2 9 /* USART 2 */
++#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
++#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
++#define AT91SAM9263_ID_CAN 12 /* CAN */
++#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
++#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
++#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
++#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
++#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
++#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
++#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
++#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
++#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
++#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
++#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
++#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
++#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
++#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
++#define AT91SAM9263_ID_UHP 29 /* USB Host port */
++#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
++#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
++
++
++/*
++ * User Peripheral physical base addresses.
++ */
++#define AT91SAM9263_BASE_UDP 0xfff78000
++#define AT91SAM9263_BASE_TCB0 0xfff7c000
++#define AT91SAM9263_BASE_TC0 0xfff7c000
++#define AT91SAM9263_BASE_TC1 0xfff7c040
++#define AT91SAM9263_BASE_TC2 0xfff7c080
++#define AT91SAM9263_BASE_MCI0 0xfff80000
++#define AT91SAM9263_BASE_MCI1 0xfff84000
++#define AT91SAM9263_BASE_TWI 0xfff88000
++#define AT91SAM9263_BASE_US0 0xfff8c000
++#define AT91SAM9263_BASE_US1 0xfff90000
++#define AT91SAM9263_BASE_US2 0xfff94000
++#define AT91SAM9263_BASE_SSC0 0xfff98000
++#define AT91SAM9263_BASE_SSC1 0xfff9c000
++#define AT91SAM9263_BASE_AC97C 0xfffa0000
++#define AT91SAM9263_BASE_SPI0 0xfffa4000
++#define AT91SAM9263_BASE_SPI1 0xfffa8000
++#define AT91SAM9263_BASE_CAN 0xfffac000
++#define AT91SAM9263_BASE_PWMC 0xfffb8000
++#define AT91SAM9263_BASE_EMAC 0xfffbc000
++#define AT91SAM9263_BASE_ISI 0xfffc4000
++#define AT91SAM9263_BASE_2DGE 0xfffc8000
++#define AT91_BASE_SYS 0xffffe000
++
++/*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
++#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
++#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
++#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
++#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
++#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
++#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
++#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
++#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
++#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
++#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
++#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
++#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
++#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
++#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
++#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
++#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
++#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
++#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
++#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
++#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
++#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
++#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
++
++#define AT91_SMC AT91_SMC0
++
++/*
++ * Internal Memory.
++ */
++#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
++#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
++
++#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
++#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
++
++#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
++#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
++
++#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
++#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
++#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
++
++#if 0
++/*
++ * PIO pin definitions (peripheral A/B multiplexing).
++ */
++
++// TODO: Add
++
++#endif
++
++#endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h 2007-03-24 16:39:16.000000000 +0100
+@@ -0,0 +1,129 @@
++/*
++ * include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h
++ *
++ * Copyright (C) 2006 Atmel Corporation.
++ *
++ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
++ * Based on AT91SAM9263 datasheet revision B (Preliminary).
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM9263_MATRIX_H
++#define AT91SAM9263_MATRIX_H
++
++#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
++#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
++#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
++#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
++#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
++#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
++#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
++#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
++#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
++#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
++#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
++#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
++#define AT91_MATRIX_ULBT_FOUR (2 << 0)
++#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
++#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
++
++#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
++#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
++#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
++#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
++#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
++#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
++#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
++#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
++#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
++#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
++#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
++#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
++#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
++#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
++#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
++#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
++#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
++
++#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
++#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
++#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
++#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
++#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
++#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
++#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
++#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
++#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
++#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
++#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
++#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
++#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
++#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
++#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
++#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
++#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
++#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
++#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
++#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
++#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
++#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
++#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
++#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
++#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
++
++#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
++#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
++#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
++#define AT91_MATRIX_RCB2 (1 << 2)
++#define AT91_MATRIX_RCB3 (1 << 3)
++#define AT91_MATRIX_RCB4 (1 << 4)
++#define AT91_MATRIX_RCB5 (1 << 5)
++#define AT91_MATRIX_RCB6 (1 << 6)
++#define AT91_MATRIX_RCB7 (1 << 7)
++#define AT91_MATRIX_RCB8 (1 << 8)
++
++#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
++#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
++#define AT91_MATRIX_ITCM_0 (0 << 0)
++#define AT91_MATRIX_ITCM_16 (5 << 0)
++#define AT91_MATRIX_ITCM_32 (6 << 0)
++#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
++#define AT91_MATRIX_DTCM_0 (0 << 4)
++#define AT91_MATRIX_DTCM_16 (5 << 4)
++#define AT91_MATRIX_DTCM_32 (6 << 4)
++
++#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
++#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
++#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
++#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
++#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
++#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
++#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
++#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
++#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
++#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
++#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
++#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
++#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
++#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
++#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
++#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
++#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
++
++#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
++#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
++#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
++#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
++#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
++#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
++#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
++#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
++#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
++#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
++#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
++
++#endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h 2007-03-24 16:39:16.000000000 +0100
+@@ -131,4 +131,11 @@
+ #define AT91_SMC_PS_16 (2 << 28)
+ #define AT91_SMC_PS_32 (3 << 28)
+
++#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
++#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
++#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
++#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
++#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
++#endif
++
+ #endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/board.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/board.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/board.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/board.h 2007-03-24 16:39:16.000000000 +0100
+@@ -34,6 +34,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/device.h>
+ #include <linux/spi/spi.h>
++#include <video/atmel_lcdc.h>
+
+ /* USB Device */
+ struct at91_udc_data {
+@@ -60,18 +61,23 @@
+ u8 wp_pin; /* (SD) writeprotect detect */
+ u8 vcc_pin; /* power switching (high == on) */
+ };
+-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
++extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+- /* Ethernet */
++/* Ethernet (EMAC & MACB) */
+ struct at91_eth_data {
+ u8 phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+ };
+ extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
++#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
++#define eth_platform_data at91_eth_data
++#endif
++
+ /* USB Host */
+ struct at91_usbh_data {
+ u8 ports; /* number of ports on root hub */
++ u8 vbus_pin[]; /* port power switch */
+ };
+ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+@@ -93,6 +99,9 @@
+ /* SPI */
+ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
++ /* LCD Controler */
++extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
++
+ /* Serial */
+ struct at91_uart_config {
+ unsigned short console_tty; /* tty number of serial console */
+@@ -114,4 +123,13 @@
+ extern u8 at91_leds_timer;
+ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+
++struct at91_gpio_led {
++ u8 index; /* index of LED */
++ char* name; /* name of LED */
++ u8 gpio; /* AT91_PIN_xx */
++ u8 flags; /* 1=active-high */
++ char* trigger; /* default trigger */
++};
++extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
++
+ #endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/cpu.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/cpu.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/cpu.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/cpu.h 2007-03-24 16:39:16.000000000 +0100
+@@ -20,7 +20,11 @@
+ #define ARCH_ID_AT91RM9200 0x09290780
+ #define ARCH_ID_AT91SAM9260 0x019803a0
+ #define ARCH_ID_AT91SAM9261 0x019703a0
++#define ARCH_ID_AT91SAM9263 0x019607a0
+
++#define ARCH_ID_AT91SAM9XE128 0x329973a0
++#define ARCH_ID_AT91SAM9XE256 0x329a93a0
++#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+
+ static inline unsigned long at91_cpu_identify(void)
+ {
+@@ -28,6 +32,16 @@
+ }
+
+
++#define ARCH_FAMILY_AT91X92 0x09200000
++#define ARCH_FAMILY_AT91SAM9 0x01900000
++#define ARCH_FAMILY_AT91SAM9XE 0x02900000
++
++static inline unsigned long at91_arch_identify(void)
++{
++ return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
++}
++
++
+ #ifdef CONFIG_ARCH_AT91RM9200
+ #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
+ #else
+@@ -35,8 +49,10 @@
+ #endif
+
+ #ifdef CONFIG_ARCH_AT91SAM9260
+-#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
++#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
++#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+ #else
++#define cpu_is_at91sam9xe() (0)
+ #define cpu_is_at91sam9260() (0)
+ #endif
+
+@@ -46,4 +62,10 @@
+ #define cpu_is_at91sam9261() (0)
+ #endif
+
++#ifdef CONFIG_ARCH_AT91SAM9263
++#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
++#else
++#define cpu_is_at91sam9263() (0)
++#endif
++
+ #endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/debug-macro.S linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/debug-macro.S
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/debug-macro.S 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/debug-macro.S 2007-03-24 16:39:16.000000000 +0100
+@@ -16,24 +16,24 @@
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+- tst \rx, #1 @ MMU enabled?
+- ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
+- ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
++ tst \rx, #1 @ MMU enabled?
++ ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
++ ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ .endm
+
+ .macro senduart,rd,rx
+- strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
++ strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
+ .endm
+
+ .macro waituart,rd,rx
+-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
+- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
++1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
++ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
+- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
++1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
++ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
+ beq 1001b
+ .endm
+
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/entry-macro.S linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/entry-macro.S
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/entry-macro.S 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/entry-macro.S 2007-03-24 16:39:16.000000000 +0100
+@@ -17,10 +17,10 @@
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+- ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
+- ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+- ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
+- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+- streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
++ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
++ ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
++ ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
++ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
++ streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
+ .endm
+
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/gpio.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/gpio.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/gpio.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/gpio.h 2007-03-24 16:39:16.000000000 +0100
+@@ -17,7 +17,7 @@
+
+ #define PIN_BASE NR_AIC_IRQS
+
+-#define MAX_GPIO_BANKS 4
++#define MAX_GPIO_BANKS 5
+
+ /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+@@ -26,37 +26,31 @@
+ #define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
+ #define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
+ #define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
+-
+ #define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
+ #define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
+ #define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
+ #define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
+ #define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
+-
+ #define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
+ #define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
+ #define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
+ #define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
+ #define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
+-
+ #define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
+ #define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
+ #define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
+ #define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
+ #define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
+-
+ #define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
+ #define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
+ #define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
+ #define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
+ #define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
+-
+ #define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
+ #define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
+ #define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
+ #define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
+ #define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
+-
+ #define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
+ #define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
+
+@@ -65,37 +59,31 @@
+ #define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
+ #define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
+ #define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
+-
+ #define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
+ #define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
+ #define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
+ #define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
+ #define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
+-
+ #define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
+ #define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
+ #define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
+ #define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
+ #define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
+-
+ #define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
+ #define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
+ #define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
+ #define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
+ #define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
+-
+ #define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
+ #define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
+ #define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
+ #define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
+ #define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
+-
+ #define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
+ #define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
+ #define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
+ #define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
+ #define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
+-
+ #define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
+ #define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
+
+@@ -104,37 +92,31 @@
+ #define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
+ #define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
+ #define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
+-
+ #define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
+ #define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
+ #define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
+ #define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
+ #define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
+-
+ #define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
+ #define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
+ #define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
+ #define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
+ #define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
+-
+ #define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
+ #define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
+ #define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
+ #define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
+ #define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
+-
+ #define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
+ #define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
+ #define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
+ #define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
+ #define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
+-
+ #define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
+ #define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
+ #define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
+ #define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
+ #define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
+-
+ #define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
+ #define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
+
+@@ -143,40 +125,67 @@
+ #define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
+ #define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
+ #define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
+-
+ #define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
+ #define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
+ #define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
+ #define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
+ #define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
+-
+ #define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
+ #define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
+ #define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
+ #define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
+ #define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
+-
+ #define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
+ #define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
+ #define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
+ #define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
+ #define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
+-
+ #define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
+ #define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
+ #define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
+ #define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
+ #define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
+-
+ #define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
+ #define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
+ #define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
+ #define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
+ #define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
+-
+ #define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
+ #define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
+
++#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
++#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
++#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
++#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
++#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
++#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
++#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
++#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
++#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
++#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
++#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
++#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
++#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
++#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
++#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
++#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
++#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
++#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
++#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
++#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
++#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
++#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
++#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
++#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
++#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
++#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
++#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
++#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
++#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
++#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
++#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
++#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
++
+ #ifndef __ASSEMBLY__
+ /* setup setup routines, called from board init or driver probe() */
+ extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/hardware.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/hardware.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/hardware.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/hardware.h 2007-03-24 16:39:16.000000000 +0100
+@@ -22,21 +22,23 @@
+ #include <asm/arch/at91sam9260.h>
+ #elif defined(CONFIG_ARCH_AT91SAM9261)
+ #include <asm/arch/at91sam9261.h>
++#elif defined(CONFIG_ARCH_AT91SAM9263)
++#include <asm/arch/at91sam9263.h>
+ #else
+ #error "Unsupported AT91 processor"
+ #endif
+
+
+ /*
+- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
+- * to 0xFEFA0000 .. 0xFF000000. (384Kb)
++ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
++ * to 0xFEF78000 .. 0xFF000000. (544Kb)
+ */
+-#define AT91_IO_PHYS_BASE 0xFFFA0000
++#define AT91_IO_PHYS_BASE 0xFFF78000
+ #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+ #define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
+
+ /* Convert a physical IO address to virtual IO address */
+-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
++#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+ /*
+ * Virtual to Physical Address mapping for IO devices.
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/ics1523.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/ics1523.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/ics1523.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/ics1523.h 2007-03-24 16:39:16.000000000 +0100
+@@ -0,0 +1,154 @@
++//*----------------------------------------------------------------------------
++//* ATMEL Microcontroller Software Support - ROUSSET -
++//*----------------------------------------------------------------------------
++//* The software is delivered "AS IS" without warranty or condition of any
++//* kind, either express, implied or statutory. This includes without
++//* limitation any warranty or condition with respect to merchantability or
++//* fitness for any particular purpose, or against the infringements of
++//* intellectual property rights of others.
++//*----------------------------------------------------------------------------
++//* File Name : ics1523.h
++//* Object : Clock Generator Prototyping File.
++//*
++//* 1.0 08/28/02 ED : Creation
++//* 1.2 13/01/03 FB : Update on lib V3
++//*----------------------------------------------------------------------------
++
++#ifndef ics1523_h
++#define ics1523_h
++
++/*-------------------------------------------*/
++/* ICS1523 TWI Serial Clock Definition */
++/*-------------------------------------------*/
++
++#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
++#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
++#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
++
++#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
++#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
++
++/*-------------------------------------------*/
++/* ICS1523 Write Operation Definition */
++/*-------------------------------------------*/
++
++#define ICS1523_ACCESS_OK 0 /* OK */
++#define ICS1523_ACCESS_ERROR -1 /* NOK */
++
++/*-------------------------------------------*/
++/* ICS1523 Device Addresses Definition */
++/*-------------------------------------------*/
++
++#define ICS_ADDR 0x26 /* Device Address */
++
++/*--------------------------------------------------*/
++/* ICS1523 Registers Internal Addresses Definition */
++/*--------------------------------------------------*/
++
++#define ICS_ICR 0x0 /* Input Control Register */
++#define ICS_LCR 0x1 /* Loop Control Register */
++#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
++#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
++#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
++#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
++#define ICS_OE 0x6 /* Output Enables Register */
++#define ICS_OD 0x7 /* Osc Divider Register */
++#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
++#define ICS_VID 0x10 /* Chip Version Register */
++#define ICS_RID 0x11 /* Chip Revision Register */
++#define ICS_SR 0x12 /* Status Register */
++
++/*------------------------------------------------------*/
++/* ICS1523 Input Control Register Bits Definition */
++/*------------------------------------------------------*/
++
++#define ICS_PDEN 0x1 /* Phase Detector Enable */
++#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
++#define ICS_REFPOL 0x4 /* External Reference Polarity */
++#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
++#define ICS_FBKSEL 0x10 /* External Feedback Select */
++#define ICS_FUNCSEL 0x20 /* Function Out Select */
++#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
++#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
++
++/*-----------------------------------------------------*/
++/* ICS1523 Loop Control Register Bits Definition */
++/*-----------------------------------------------------*/
++
++#define ICS_PFD 0x7 /* Phase Detector Gain */
++#define ICS_PSD 0x30 /* Post-Scaler Divider */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider LSBs Definition */
++/*----------------------------------------------------*/
++
++#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider MSBs Definition */
++/*----------------------------------------------------*/
++
++#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
++
++/*------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
++/*------------------------------------------------------------*/
++
++#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
++#define ICS_FILSEL 0x80 /* Loop Filter Select */
++
++/*----------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
++/*----------------------------------------------------------------*/
++
++#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
++#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
++
++/*-------------------------------------------------------*/
++/* ICS1523 Output Enables Register Bits Definition */
++/*-------------------------------------------------------*/
++
++#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
++#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
++#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
++#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
++#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
++#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
++#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
++
++/*----------------------------------------------------*/
++/* ICS1523 Osc Divider Register Bits Definition */
++/*----------------------------------------------------*/
++
++#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
++#define ICS_INSEL 0x80 /* Input Select */
++
++/*---------------------------------------------------*/
++/* ICS1523 DPA & PLL Reset Register Definition */
++/*---------------------------------------------------*/
++
++#define ICS_DPAR 0x0A /* DPA Reset Command */
++#define ICS_PLLR 0x50 /* PLL Reset Command */
++
++/*------------------------------------------------*/
++/* ICS1523 Chip Version Register Definition */
++/*------------------------------------------------*/
++
++#define ICS_CHIPV 0xFF /* Chip Version */
++
++/*-------------------------------------------------*/
++/* ICS1523 Chip Revision Register Definition */
++/*-------------------------------------------------*/
++
++#define ICS_CHIPR 0xFF /* Chip Revision */
++
++/*------------------------------------------*/
++/* ICS1523 Status Register Definition */
++/*------------------------------------------*/
++
++#define ICS_DPALOCK 0x1 /* DPA Lock Status */
++#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
++
++int at91_ics1523_init(void);
++
++#endif /* ics1523_h */
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/irqs.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/irqs.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/irqs.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/irqs.h 2007-03-24 16:39:16.000000000 +0100
+@@ -37,8 +37,8 @@
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+- * We make provision for 4 banks of GPIO.
++ * We make provision for 5 banks of GPIO.
+ */
+-#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
++#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
+
+ #endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/spi.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/spi.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/spi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/spi.h 2007-03-24 16:39:16.000000000 +0100
+@@ -0,0 +1,54 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
++ *
++ * (c) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifndef AT91_LEGACY_SPI_H
++#define AT91_LEGACY_SPI_H
++
++#define SPI_MAJOR 153 /* registered device number */
++
++#define DEFAULT_SPI_CLK 6000000
++
++
++/* Maximum number of buffers in a single SPI transfer.
++ * DataFlash uses maximum of 2
++ * spidev interface supports up to 8.
++ */
++#define MAX_SPI_TRANSFERS 8
++#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
++
++/*
++ * Describes the buffers for a SPI transfer.
++ * A transmit & receive buffer must be specified for each transfer
++ */
++struct spi_transfer_list {
++ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
++ int txlen[MAX_SPI_TRANSFERS];
++ void* rx[MAX_SPI_TRANSFERS]; /* receive */
++ int rxlen[MAX_SPI_TRANSFERS];
++ int nr_transfers; /* number of transfers */
++ int curr; /* current transfer */
++};
++
++struct spi_local {
++ unsigned int pcs; /* Peripheral Chip Select value */
++
++ struct spi_transfer_list *xfers; /* current transfer list */
++ dma_addr_t tx, rx; /* DMA address for current transfer */
++ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
++};
++
++
++/* Exported functions */
++extern void spi_access_bus(short device);
++extern void spi_release_bus(short device);
++extern int spi_transfer(struct spi_transfer_list* list);
++
++#endif
+diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/timex.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/timex.h
+--- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/timex.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/timex.h 2007-03-24 16:39:16.000000000 +0100
+@@ -32,6 +32,11 @@
+ #define AT91SAM9_MASTER_CLOCK 99300000
+ #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
++#elif defined(CONFIG_ARCH_AT91SAM9263)
++
++#define AT91SAM9_MASTER_CLOCK 99959500
++#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
++
+ #endif
+
+ #endif
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at32ap7000.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at32ap7000.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at32ap7000.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at32ap7000.h 2007-03-24 16:42:28.000000000 +0100
+@@ -24,10 +24,12 @@
+ #define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+ #define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+ #define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+
+ #define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+ #define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+ #define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+ #define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
+
+ #endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at91_pdc.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at91_pdc.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at91_pdc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at91_pdc.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,36 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91rm9200/at91_pdc.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * Peripheral Data Controller (PDC) registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91_PDC_H
+-#define AT91_PDC_H
+-
+-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
+-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
+-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
+-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
+-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
+-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+-
+-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
+-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+-
+-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
+-
+-#endif
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/board.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/board.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/board.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/board.h 2007-03-24 16:42:29.000000000 +0100
+@@ -6,6 +6,8 @@
+
+ #include <linux/types.h>
+
++#define GPIO_PIN_NONE (-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+
+@@ -26,7 +28,19 @@
+ struct platform_device *
+ at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+
+-struct platform_device *at32_add_device_spi(unsigned int id);
++struct spi_board_info;
++struct platform_device *
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
++
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++struct platform_device *at32_add_device_usba(unsigned int id);
+
+ struct lcdc_platform_data {
+ unsigned long fbmem_start;
+@@ -35,4 +49,8 @@
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
+
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++struct platform_device *at32_add_device_isi(unsigned int id);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/gpio.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/gpio.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/gpio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/gpio.h 2007-03-24 16:42:28.000000000 +0100
+@@ -0,0 +1,27 @@
++#ifndef __ASM_AVR32_ARCH_GPIO_H
++#define __ASM_AVR32_ARCH_GPIO_H
++
++#include <linux/compiler.h>
++#include <asm/irq.h>
++
++
++/* Arch-neutral GPIO API */
++int __must_check gpio_request(unsigned int gpio, const char *label);
++void gpio_free(unsigned int gpio);
++
++int gpio_direction_input(unsigned int gpio);
++int gpio_direction_output(unsigned int gpio);
++int gpio_get_value(unsigned int gpio);
++void gpio_set_value(unsigned int gpio, int value);
++
++static inline int gpio_to_irq(unsigned int gpio)
++{
++ return gpio + GPIO_IRQ_BASE;
++}
++
++static inline int irq_to_gpio(unsigned int irq)
++{
++ return irq - GPIO_IRQ_BASE;
++}
++
++#endif /* __ASM_AVR32_ARCH_GPIO_H */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/irq.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/irq.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/irq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/irq.h 2007-03-24 16:42:28.000000000 +0100
+@@ -0,0 +1,14 @@
++#ifndef __ASM_AVR32_ARCH_IRQ_H
++#define __ASM_AVR32_ARCH_IRQ_H
++
++#define EIM_IRQ_BASE NR_INTERNAL_IRQS
++#define NR_EIM_IRQS 32
++
++#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
++
++#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
++#define NR_GPIO_IRQS (5 * 32)
++
++#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
++
++#endif /* __ASM_AVR32_ARCH_IRQ_H */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/portmux.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/portmux.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/portmux.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/portmux.h 2007-03-24 16:42:28.000000000 +0100
+@@ -15,12 +15,14 @@
+ *
+ * The following flags determine the initial state of the pin.
+ */
+-#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */
+-#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */
+-#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */
++#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */
++#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
++#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
++#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
+
+ void at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags);
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
++void at32_reserve_pin(unsigned int pin);
+
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/smc.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/smc.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/smc.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/smc.h 2007-03-24 16:42:29.000000000 +0100
+@@ -48,10 +48,32 @@
+ unsigned int nwe_controlled:1;
+
+ /*
++ * 0: NWAIT is disabled
++ * 1: Reserved
++ * 2: NWAIT is frozen mode
++ * 3: NWAIT in ready mode
++ */
++ unsigned int nwait_mode:2;
++
++ /*
+ * 0: Byte select access type
+ * 1: Byte write access type
+ */
+ unsigned int byte_write:1;
++
++ /*
++ * Number of clock cycles before data is released after
++ * the rising edge of the read controlling signal
++ *
++ * Total cycles from SMC is tdf_cycles + 1
++ */
++ unsigned int tdf_cycles:4;
++
++ /*
++ * 0: TDF optimization disabled
++ * 1: TDF optimization enabled
++ */
++ unsigned int tdf_mode:1;
+ };
+
+ extern int smc_set_configuration(int cs, const struct smc_config *config);
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/checksum.h linux-2.6.20.4-atmel/include/asm-avr32/checksum.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/checksum.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/checksum.h 2007-03-24 16:42:28.000000000 +0100
+@@ -38,7 +38,7 @@
+ * passed in an incorrect kernel address to one of these functions.
+ *
+ * If you use these functions directly please don't forget the
+- * verify_area().
++ * access_ok().
+ */
+ static inline
+ __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/dma-controller.h linux-2.6.20.4-atmel/include/asm-avr32/dma-controller.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/dma-controller.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/dma-controller.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
++
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
++
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
++
++ unsigned short channel;
++
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++ struct dma_request req;
++
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++
++ dma_addr_t data_reg;
++ unsigned short periph_id;
++
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++ struct dma_request req;
++
++ int periods;
++ unsigned long buffer_size;
++
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
++
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
++
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++ struct dma_request req;
++
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
++
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
++
++ size_t length;
++
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
++
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/dma-mapping.h linux-2.6.20.4-atmel/include/asm-avr32/dma-mapping.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/dma-mapping.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/dma-mapping.h 2007-03-24 16:42:28.000000000 +0100
+@@ -32,6 +32,14 @@
+ return 0;
+ }
+
++/*
++ * dma_map_single can't fail as it is implemented now.
++ */
++static inline int dma_mapping_error(dma_addr_t addr)
++{
++ return 0;
++}
++
+ /**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/gpio.h linux-2.6.20.4-atmel/include/asm-avr32/gpio.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/gpio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/gpio.h 2007-03-24 16:42:28.000000000 +0100
+@@ -0,0 +1,6 @@
++#ifndef __ASM_AVR32_GPIO_H
++#define __ASM_AVR32_GPIO_H
++
++#include <asm/arch/gpio.h>
++
++#endif /* __ASM_AVR32_GPIO_H */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/ide.h linux-2.6.20.4-atmel/include/asm-avr32/ide.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/ide.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/ide.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,36 @@
++/*
++ * linux/include/asm-arm/ide.h
++ *
++ * Copyright (C) 1994-1996 Linus Torvalds & authors
++ */
++
++/*
++ * This file contains the ARM architecture specific IDE code.
++ */
++
++#ifndef __ASMAVR32_IDE_H
++#define __ASMAVR32_IDE_H
++
++#ifdef __KERNEL__
++
++#ifndef MAX_HWIFS
++#define MAX_HWIFS 4
++#endif
++
++#if !defined(CONFIG_ARCH_L7200)
++# define IDE_ARCH_OBSOLETE_INIT
++# ifdef CONFIG_ARCH_CLPS7500
++# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
++# else
++# define ide_default_io_ctl(base) (0)
++# endif
++#endif /* !ARCH_L7200 */
++
++#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
++#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
++#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
++#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len)
++
++#endif /* __KERNEL__ */
++
++#endif /* __ASMAVR32_IDE_H */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/io.h linux-2.6.20.4-atmel/include/asm-avr32/io.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/io.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/io.h 2007-03-24 16:42:29.000000000 +0100
+@@ -5,6 +5,8 @@
+
+ #ifdef __KERNEL__
+
++#include <linux/types.h>
++
+ #include <asm/addrspace.h>
+ #include <asm/byteorder.h>
+
+@@ -28,45 +30,72 @@
+ * Generic IO read/write. These perform native-endian accesses. Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+-extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
+-extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
+-extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
++extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
++extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
++extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
++
++extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
++extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
++extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
++
++static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
++{
++ *(volatile u8 __force *)addr = v;
++}
++static inline void __raw_writew(u16 v, volatile void __iomem *addr)
++{
++ *(volatile u16 __force *)addr = v;
++}
++static inline void __raw_writel(u32 v, volatile void __iomem *addr)
++{
++ *(volatile u32 __force *)addr = v;
++}
++
++static inline u8 __raw_readb(const volatile void __iomem *addr)
++{
++ return *(const volatile u8 __force *)addr;
++}
++static inline u16 __raw_readw(const volatile void __iomem *addr)
++{
++ return *(const volatile u16 __force *)addr;
++}
++static inline u32 __raw_readl(const volatile void __iomem *addr)
++{
++ return *(const volatile u32 __force *)addr;
++}
+
+-extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
+-extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
+-extern void __raw_readsl(unsigned int addr, void *data, int longlen);
++#define __swizzle_addr_b(addr) \
++ ((typeof(addr))((unsigned long)(addr) ^ 3UL))
++#define __swizzle_addr_w(addr) \
++ ((typeof(addr))((unsigned long)(addr) ^ 2UL))
++#define __swizzle_addr_l(addr) \
++ (addr)
+
+-static inline void writeb(unsigned char b, volatile void __iomem *addr)
++static inline void writeb(u8 v, volatile void __iomem *addr)
+ {
+- *(volatile unsigned char __force *)addr = b;
++ __raw_writeb(v, __swizzle_addr_b(addr));
+ }
+-static inline void writew(unsigned short b, volatile void __iomem *addr)
++static inline void writew(u16 v, volatile void __iomem *addr)
+ {
+- *(volatile unsigned short __force *)addr = b;
++ __raw_writew(v, __swizzle_addr_w(addr));
+ }
+-static inline void writel(unsigned int b, volatile void __iomem *addr)
++static inline void writel(u32 v, volatile void __iomem *addr)
+ {
+- *(volatile unsigned int __force *)addr = b;
++ __raw_writel(v, __swizzle_addr_l(addr));
+ }
+-#define __raw_writeb writeb
+-#define __raw_writew writew
+-#define __raw_writel writel
+
+-static inline unsigned char readb(const volatile void __iomem *addr)
++static inline u8 readb(const volatile void __iomem *addr)
+ {
+- return *(const volatile unsigned char __force *)addr;
++ return __raw_readb(__swizzle_addr_b(addr));
+ }
+-static inline unsigned short readw(const volatile void __iomem *addr)
++static inline u16 readw(const volatile void __iomem *addr)
+ {
+- return *(const volatile unsigned short __force *)addr;
++ return __raw_readw(__swizzle_addr_w(addr));
+ }
+-static inline unsigned int readl(const volatile void __iomem *addr)
++static inline u32 readl(const volatile void __iomem *addr)
+ {
+- return *(const volatile unsigned int __force *)addr;
++ return __raw_readl(__swizzle_addr_l(addr));
+ }
+-#define __raw_readb readb
+-#define __raw_readw readw
+-#define __raw_readl readl
+
+ #define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
+ #define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
+@@ -108,17 +137,13 @@
+
+ #endif
+
+-
+-/*
+- * These two are only here because ALSA _thinks_ it needs them...
+- */
+ static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
+ unsigned long count)
+ {
+ char *p = to;
+ while (count) {
+ count--;
+- *p = readb(from);
++ *p = __raw_readb(from);
+ p++;
+ from++;
+ }
+@@ -130,7 +155,7 @@
+ const char *p = from;
+ while (count) {
+ count--;
+- writeb(*p, to);
++ __raw_writeb(*p, to);
+ p++;
+ to++;
+ }
+@@ -252,6 +277,9 @@
+ #define ioremap(offset, size) \
+ __ioremap((offset), (size), 0)
+
++#define ioremap_nocache(offset, size) \
++ __ioremap((offset), (size), 0)
++
+ #define iounmap(addr) \
+ __iounmap(addr)
+
+@@ -263,6 +291,14 @@
+ #define page_to_bus page_to_phys
+ #define bus_to_page phys_to_page
+
++/*
++ * Create a virtual mapping cookie for an IO port range. There exists
++ * no such thing as port-based I/O on AVR32, so a regular ioremap()
++ * should do what we need.
++ */
++#define ioport_map(port, nr) ioremap(port, nr)
++#define ioport_unmap(port) iounmap(port)
++
+ #define dma_cache_wback_inv(_start, _size) \
+ flush_dcache_region(_start, _size)
+ #define dma_cache_inv(_start, _size) \
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/irq.h linux-2.6.20.4-atmel/include/asm-avr32/irq.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/irq.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/irq.h 2007-03-24 16:42:28.000000000 +0100
+@@ -2,8 +2,12 @@
+ #define __ASM_AVR32_IRQ_H
+
+ #define NR_INTERNAL_IRQS 64
+-#define NR_EXTERNAL_IRQS 64
+-#define NR_IRQS (NR_INTERNAL_IRQS + NR_EXTERNAL_IRQS)
++
++#include <asm/arch/irq.h>
++
++#ifndef NR_IRQS
++#define NR_IRQS (NR_INTERNAL_IRQS)
++#endif
+
+ #define irq_canonicalize(i) (i)
+
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/Kbuild linux-2.6.20.4-atmel/include/asm-avr32/Kbuild
+--- linux-2.6.20.4-0rig/include/asm-avr32/Kbuild 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/Kbuild 2007-03-24 16:42:28.000000000 +0100
+@@ -1,3 +1,3 @@
+ include include/asm-generic/Kbuild.asm
+
+-headers-y += cachectl.h
++header-y += cachectl.h
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/periph/lcdc.h linux-2.6.20.4-atmel/include/asm-avr32/periph/lcdc.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/periph/lcdc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/periph/lcdc.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,271 @@
++/*
++ * Register definitions for Atmel/SIDSA LCD Controller
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_PERIPH_LCDC_H__
++#define __ASM_AVR32_PERIPH_LCDC_H__
++
++#define LCDC_CONTRAST_CTR 0x00000840
++# define LCDC_CONTRAST_CTR_ENA_OFFSET 3
++# define LCDC_CONTRAST_CTR_ENA_SIZE 1
++# define LCDC_CONTRAST_CTR_POL_OFFSET 2
++# define LCDC_CONTRAST_CTR_POL_SIZE 1
++# define LCDC_CONTRAST_CTR_PS_OFFSET 0
++# define LCDC_CONTRAST_CTR_PS_SIZE 2
++#define LCDC_CONTRAST_VAL 0x00000844
++# define LCDC_CONTRAST_VAL_CVAL_OFFSET 0
++# define LCDC_CONTRAST_VAL_CVAL_SIZE 8
++#define LCDC_DMABADDR1 0x00000000
++# define LCDC_DMABADDR1_BADDR_U_OFFSET 0
++# define LCDC_DMABADDR1_BADDR_U_SIZE 32
++#define LCDC_DMABADDR2 0x00000004
++# define LCDC_DMABADDR2_BADDR_L_OFFSET 0
++# define LCDC_DMABADDR2_BADDR_L_SIZE 32
++#define LCDC_DMACON 0x0000001C
++# define LCDC_DMACON_DMABUSY_OFFSET 2
++# define LCDC_DMACON_DMABUSY_SIZE 1
++# define LCDC_DMACON_DMAEN_OFFSET 0
++# define LCDC_DMACON_DMAEN_SIZE 1
++# define LCDC_DMACON_DMARST_OFFSET 1
++# define LCDC_DMACON_DMARST_SIZE 1
++# define LCDC_DMACON_DMAUPDT_OFFSET 3
++# define LCDC_DMACON_DMAUPDT_SIZE 1
++# define LCDC_DMACON_DMA2DEN_OFFSET 4
++# define LCDC_DMACON_DMA2DEN_SIZE 1
++#define LCDC_DMAFRMADD1 0x00000010
++# define LCDC_DMAFRMADD1_FRMADD_U_OFFSET 0
++# define LCDC_DMAFRMADD1_FRMADD_U_SIZE 32
++#define LCDC_DMAFRMADD2 0x00000014
++# define LCDC_DMAFRMADD2_FRMADD_L_OFFSET 0
++# define LCDC_DMAFRMADD2_FRMADD_L_SIZE 32
++#define LCDC_DMAFRMCFG 0x00000018
++# define LCDC_DMAFRMCFG_BRSTLEN_OFFSET 24
++# define LCDC_DMAFRMCFG_BRSTLEN_SIZE 7
++# define LCDC_DMAFRMCFG_FRMSIZE_OFFSET 0
++# define LCDC_DMAFRMCFG_FRMSIZE_SIZE 23
++#define LCDC_DMAFRMPT1 0x00000008
++# define LCDC_DMAFRMPT1_FRMPT_U_OFFSET 0
++# define LCDC_DMAFRMPT1_FRMPT_U_SIZE 23
++#define LCDC_DMAFRMPT2 0x0000000C
++# define LCDC_DMAFRMPT2_FRMPT_L_OFFSET 0
++# define LCDC_DMAFRMPT2_FRMPT_L_SIZE 23
++#define LCDC_DMA2DCFG 0x00000020
++# define LCDC_DMA2DCFG_ADDRINC_OFFSET 0
++# define LCDC_DMA2DCFG_ADDRINC_SIZE 16
++# define LCDC_DMA2DCFG_PIXELOFF_OFFSET 24
++# define LCDC_DMA2DCFG_PIXELOFF_SIZE 5
++#define LCDC_DP1_2 0x0000081C
++# define LCDC_DP1_2_DP1_2_OFFSET 0
++# define LCDC_DP1_2_DP1_2_SIZE 8
++#define LCDC_DP2_3 0x00000828
++# define LCDC_DP2_3_DP2_3_OFFSET 0
++# define LCDC_DP2_3_DP2_3_SIZE 12
++#define LCDC_DP3_4 0x00000830
++# define LCDC_DP3_4_DP3_4_OFFSET 0
++# define LCDC_DP3_4_DP3_4_SIZE 16
++#define LCDC_DP3_5 0x00000824
++# define LCDC_DP3_5_DP3_5_OFFSET 0
++# define LCDC_DP3_5_DP3_5_SIZE 20
++#define LCDC_DP4_5 0x00000834
++# define LCDC_DP4_5_DP4_5_OFFSET 0
++# define LCDC_DP4_5_DP4_5_SIZE 20
++#define LCDC_DP4_7 0x00000820
++# define LCDC_DP4_7_DP4_7_OFFSET 0
++# define LCDC_DP4_7_DP4_7_SIZE 28
++#define LCDC_DP5_7 0x0000082C
++# define LCDC_DP5_7_DP5_7_OFFSET 0
++# define LCDC_DP5_7_DP5_7_SIZE 28
++#define LCDC_DP6_7 0x00000838
++# define LCDC_DP6_7_DP6_7_OFFSET 0
++# define LCDC_DP6_7_DP6_7_SIZE 28
++#define LCDC_LCDCON1 0x00000800
++# define LCDC_LCDCON1_BYPASS_OFFSET 0
++# define LCDC_LCDCON1_BYPASS_SIZE 1
++# define LCDC_LCDCON1_CLKVAL_OFFSET 12
++# define LCDC_LCDCON1_CLKVAL_SIZE 9
++# define LCDC_LCDCON1_LINECNT_OFFSET 21
++# define LCDC_LCDCON1_LINECNT_SIZE 11
++#define LCDC_LCDCON2 0x00000804
++# define LCDC_LCDCON2_CLKMOD_OFFSET 15
++# define LCDC_LCDCON2_CLKMOD_SIZE 1
++# define LCDC_LCDCON2_DISTYPE_OFFSET 0
++# define LCDC_LCDCON2_DISTYPE_SIZE 2
++# define LCDC_LCDCON2_IFWIDTH_OFFSET 3
++# define LCDC_LCDCON2_IFWIDTH_SIZE 2
++# define LCDC_LCDCON2_INVCLK_OFFSET 11
++# define LCDC_LCDCON2_INVCLK_SIZE 1
++# define LCDC_LCDCON2_INVDVAL_OFFSET 12
++# define LCDC_LCDCON2_INVDVAL_SIZE 1
++# define LCDC_LCDCON2_INVFRAME_OFFSET 9
++# define LCDC_LCDCON2_INVFRAME_SIZE 1
++# define LCDC_LCDCON2_INVLINE_OFFSET 10
++# define LCDC_LCDCON2_INVLINE_SIZE 1
++# define LCDC_LCDCON2_INVVD_OFFSET 8
++# define LCDC_LCDCON2_INVVD_SIZE 1
++# define LCDC_LCDCON2_MEMOR_OFFSET 30
++# define LCDC_LCDCON2_MEMOR_SIZE 2
++# define LCDC_LCDCON2_PIXELSIZE_OFFSET 5
++# define LCDC_LCDCON2_PIXELSIZE_SIZE 3
++# define LCDC_LCDCON2_SCANMOD_OFFSET 2
++# define LCDC_LCDCON2_SCANMOD_SIZE 1
++#define LCDC_LCDFIFO 0x00000814
++# define LCDC_LCDFIFO_FIFOTH_OFFSET 0
++# define LCDC_LCDFIFO_FIFOTH_SIZE 16
++#define LCDC_LCDFRMCFG 0x00000810
++# define LCDC_LCDFRMCFG_LINESIZE_OFFSET 21
++# define LCDC_LCDFRMCFG_LINESIZE_SIZE 11
++# define LCDC_LCDFRMCFG_LINEVAL_OFFSET 0
++# define LCDC_LCDFRMCFG_LINEVAL_SIZE 11
++#define LCDC_LCDMVAL 0x00000818
++# define LCDC_LCDMVAL_MMODE_OFFSET 31
++# define LCDC_LCDMVAL_MMODE_SIZE 1
++# define LCDC_LCDMVAL_MVAL_OFFSET 0
++# define LCDC_LCDMVAL_MVAL_SIZE 8
++#define LCDC_LCDTIM1 0x00000808
++# define LCDC_LCDTIM1_VBP_OFFSET 8
++# define LCDC_LCDTIM1_VBP_SIZE 8
++# define LCDC_LCDTIM1_VFP_OFFSET 0
++# define LCDC_LCDTIM1_VFP_SIZE 8
++# define LCDC_LCDTIM1_VHDLY_OFFSET 24
++# define LCDC_LCDTIM1_VHDLY_SIZE 4
++# define LCDC_LCDTIM1_VPW_OFFSET 16
++# define LCDC_LCDTIM1_VPW_SIZE 6
++#define LCDC_LCDTIM2 0x0000080C
++# define LCDC_LCDTIM2_HBP_OFFSET 0
++# define LCDC_LCDTIM2_HBP_SIZE 8
++# define LCDC_LCDTIM2_HFP_OFFSET 21
++# define LCDC_LCDTIM2_HFP_SIZE 11
++# define LCDC_LCDTIM2_HPW_OFFSET 8
++# define LCDC_LCDTIM2_HPW_SIZE 6
++#define LCDC_LCD_GPR 0x0000085C
++# define LCDC_LCD_GPR_GPRB0_OFFSET 0
++# define LCDC_LCD_GPR_GPRB0_SIZE 1
++# define LCDC_LCD_GPR_GPRB1_OFFSET 1
++# define LCDC_LCD_GPR_GPRB1_SIZE 1
++# define LCDC_LCD_GPR_GPRB2_OFFSET 2
++# define LCDC_LCD_GPR_GPRB2_SIZE 1
++# define LCDC_LCD_GPR_GPRB3_OFFSET 3
++# define LCDC_LCD_GPR_GPRB3_SIZE 1
++# define LCDC_LCD_GPR_GPRB4_OFFSET 4
++# define LCDC_LCD_GPR_GPRB4_SIZE 1
++# define LCDC_LCD_GPR_GPRB5_OFFSET 5
++# define LCDC_LCD_GPR_GPRB5_SIZE 1
++# define LCDC_LCD_GPR_GPRB6_OFFSET 6
++# define LCDC_LCD_GPR_GPRB6_SIZE 1
++# define LCDC_LCD_GPR_GPRB7_OFFSET 7
++# define LCDC_LCD_GPR_GPRB7_SIZE 1
++#define LCDC_LCD_ICR 0x00000858
++# define LCDC_LCD_ICR_EOFIC_OFFSET 2
++# define LCDC_LCD_ICR_EOFIC_SIZE 1
++# define LCDC_LCD_ICR_LNIC_OFFSET 0
++# define LCDC_LCD_ICR_LNIC_SIZE 1
++# define LCDC_LCD_ICR_LSTLNIC_OFFSET 1
++# define LCDC_LCD_ICR_LSTLNIC_SIZE 1
++# define LCDC_LCD_ICR_MERIC_OFFSET 6
++# define LCDC_LCD_ICR_MERIC_SIZE 1
++# define LCDC_LCD_ICR_OWRIC_OFFSET 5
++# define LCDC_LCD_ICR_OWRIC_SIZE 1
++# define LCDC_LCD_ICR_UFLWIC_OFFSET 4
++# define LCDC_LCD_ICR_UFLWIC_SIZE 1
++#define LCDC_LCD_IDR 0x0000084C
++# define LCDC_LCD_IDR_EOFID_OFFSET 2
++# define LCDC_LCD_IDR_EOFID_SIZE 1
++# define LCDC_LCD_IDR_LNID_OFFSET 0
++# define LCDC_LCD_IDR_LNID_SIZE 1
++# define LCDC_LCD_IDR_LSTLNID_OFFSET 1
++# define LCDC_LCD_IDR_LSTLNID_SIZE 1
++# define LCDC_LCD_IDR_MERID_OFFSET 6
++# define LCDC_LCD_IDR_MERID_SIZE 1
++# define LCDC_LCD_IDR_OWRID_OFFSET 5
++# define LCDC_LCD_IDR_OWRID_SIZE 1
++# define LCDC_LCD_IDR_UFLWID_OFFSET 4
++# define LCDC_LCD_IDR_UFLWID_SIZE 1
++#define LCDC_LCD_IER 0x00000848
++# define LCDC_LCD_IER_EOFIE_OFFSET 2
++# define LCDC_LCD_IER_EOFIE_SIZE 1
++# define LCDC_LCD_IER_LNIE_OFFSET 0
++# define LCDC_LCD_IER_LNIE_SIZE 1
++# define LCDC_LCD_IER_LSTLNIE_OFFSET 1
++# define LCDC_LCD_IER_LSTLNIE_SIZE 1
++# define LCDC_LCD_IER_MERIE_OFFSET 6
++# define LCDC_LCD_IER_MERIE_SIZE 1
++# define LCDC_LCD_IER_OWRIE_OFFSET 5
++# define LCDC_LCD_IER_OWRIE_SIZE 1
++# define LCDC_LCD_IER_UFLWIE_OFFSET 4
++# define LCDC_LCD_IER_UFLWIE_SIZE 1
++#define LCDC_LCD_IMR 0x00000850
++# define LCDC_LCD_IMR_EOFIM_OFFSET 2
++# define LCDC_LCD_IMR_EOFIM_SIZE 1
++# define LCDC_LCD_IMR_LNIM_OFFSET 0
++# define LCDC_LCD_IMR_LNIM_SIZE 1
++# define LCDC_LCD_IMR_LSTLNIM_OFFSET 1
++# define LCDC_LCD_IMR_LSTLNIM_SIZE 1
++# define LCDC_LCD_IMR_MERIM_OFFSET 6
++# define LCDC_LCD_IMR_MERIM_SIZE 1
++# define LCDC_LCD_IMR_OWRIM_OFFSET 5
++# define LCDC_LCD_IMR_OWRIM_SIZE 1
++# define LCDC_LCD_IMR_UFLWIM_OFFSET 4
++# define LCDC_LCD_IMR_UFLWIM_SIZE 1
++#define LCDC_LCD_IRR 0x00000864
++# define LCDC_LCD_IRR_EOFIR_OFFSET 2
++# define LCDC_LCD_IRR_EOFIR_SIZE 1
++# define LCDC_LCD_IRR_LNIR_OFFSET 0
++# define LCDC_LCD_IRR_LNIR_SIZE 1
++# define LCDC_LCD_IRR_LSTLNIR_OFFSET 1
++# define LCDC_LCD_IRR_LSTLNIR_SIZE 1
++# define LCDC_LCD_IRR_MERIR_OFFSET 6
++# define LCDC_LCD_IRR_MERIR_SIZE 1
++# define LCDC_LCD_IRR_OWRIR_OFFSET 5
++# define LCDC_LCD_IRR_OWRIR_SIZE 1
++# define LCDC_LCD_IRR_UFLWIR_OFFSET 4
++# define LCDC_LCD_IRR_UFLWIR_SIZE 1
++#define LCDC_LCD_ISR 0x00000854
++# define LCDC_LCD_ISR_EOFIS_OFFSET 2
++# define LCDC_LCD_ISR_EOFIS_SIZE 1
++# define LCDC_LCD_ISR_LNIS_OFFSET 0
++# define LCDC_LCD_ISR_LNIS_SIZE 1
++# define LCDC_LCD_ISR_LSTLNIS_OFFSET 1
++# define LCDC_LCD_ISR_LSTLNIS_SIZE 1
++# define LCDC_LCD_ISR_MERIS_OFFSET 6
++# define LCDC_LCD_ISR_MERIS_SIZE 1
++# define LCDC_LCD_ISR_OWRIS_OFFSET 5
++# define LCDC_LCD_ISR_OWRIS_SIZE 1
++# define LCDC_LCD_ISR_UFLWIS_OFFSET 4
++# define LCDC_LCD_ISR_UFLWIS_SIZE 1
++#define LCDC_LCD_ITR 0x00000860
++# define LCDC_LCD_ITR_EOFIT_OFFSET 2
++# define LCDC_LCD_ITR_EOFIT_SIZE 1
++# define LCDC_LCD_ITR_LNIT_OFFSET 0
++# define LCDC_LCD_ITR_LNIT_SIZE 1
++# define LCDC_LCD_ITR_LSTLNIT_OFFSET 1
++# define LCDC_LCD_ITR_LSTLNIT_SIZE 1
++# define LCDC_LCD_ITR_MERIT_OFFSET 6
++# define LCDC_LCD_ITR_MERIT_SIZE 1
++# define LCDC_LCD_ITR_OWRIT_OFFSET 5
++# define LCDC_LCD_ITR_OWRIT_SIZE 1
++# define LCDC_LCD_ITR_UFLWIT_OFFSET 4
++# define LCDC_LCD_ITR_UFLWIT_SIZE 1
++#define LCDC_PWRCON 0x0000083C
++# define LCDC_PWRCON_GUARD_TIME_OFFSET 1
++# define LCDC_PWRCON_GUARD_TIME_SIZE 7
++# define LCDC_PWRCON_LCD_BUSY_OFFSET 31
++# define LCDC_PWRCON_LCD_BUSY_SIZE 1
++# define LCDC_PWRCON_LCD_PWR_OFFSET 0
++# define LCDC_PWRCON_LCD_PWR_SIZE 1
++
++#define LCDC_BIT(name) (1 << LCDC_##name##_OFFSET)
++#define LCDC_MKBF(name,value) (((value) & ((1 << LCDC_##name##_SIZE) - 1)) << LCDC_##name##_OFFSET)
++#define LCDC_GETBF(name,value) (((value) >> LCDC_##name##_OFFSET) & ((1 << LCDC_##name##_SIZE) - 1))
++#define LCDC_INSBF(name,value,old) (((old) & ~(((1 << LCDC_##name##_SIZE) - 1) << LCDC_##name##_OFFSET)) | LCDC_MKBF(name, value))
++
++#define lcdc_readl(port,reg) \
++ __raw_readl((port)->regs + LCDC_##reg)
++#define lcdc_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + LCDC_##reg)
++
++#endif /* __ASM_AVR32_PERIPH_LCDC_H__ */
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/posix_types.h linux-2.6.20.4-atmel/include/asm-avr32/posix_types.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/posix_types.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/posix_types.h 2007-03-24 16:42:28.000000000 +0100
+@@ -23,7 +23,7 @@
+ typedef unsigned int __kernel_uid_t;
+ typedef unsigned int __kernel_gid_t;
+ typedef unsigned long __kernel_size_t;
+-typedef int __kernel_ssize_t;
++typedef long __kernel_ssize_t;
+ typedef int __kernel_ptrdiff_t;
+ typedef long __kernel_time_t;
+ typedef long __kernel_suseconds_t;
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/uaccess.h linux-2.6.20.4-atmel/include/asm-avr32/uaccess.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/uaccess.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/uaccess.h 2007-03-24 16:42:28.000000000 +0100
+@@ -68,12 +68,6 @@
+
+ #define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
+
+-static inline int
+-verify_area(int type, const void __user *addr, unsigned long size)
+-{
+- return access_ok(type, addr, size) ? 0 : -EFAULT;
+-}
+-
+ /* Generic arbitrary sized copy. Return the number of bytes NOT copied */
+ extern __kernel_size_t __copy_user(void *to, const void *from,
+ __kernel_size_t n);
+diff -urN linux-2.6.20.4-0rig/include/asm-avr32/unistd.h linux-2.6.20.4-atmel/include/asm-avr32/unistd.h
+--- linux-2.6.20.4-0rig/include/asm-avr32/unistd.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/asm-avr32/unistd.h 2007-03-24 16:42:28.000000000 +0100
+@@ -120,7 +120,7 @@
+ #define __NR_getitimer 105
+ #define __NR_swapoff 106
+ #define __NR_sysinfo 107
+-#define __NR_ipc 108
++/* 108 was __NR_ipc for a little while */
+ #define __NR_sendfile 109
+ #define __NR_setdomainname 110
+ #define __NR_uname 111
+@@ -282,8 +282,21 @@
+ #define __NR_vmsplice 264
+ #define __NR_epoll_pwait 265
+
++#define __NR_msgget 266
++#define __NR_msgsnd 267
++#define __NR_msgrcv 268
++#define __NR_msgctl 269
++#define __NR_semget 270
++#define __NR_semop 271
++#define __NR_semctl 272
++#define __NR_semtimedop 273
++#define __NR_shmat 274
++#define __NR_shmget 275
++#define __NR_shmdt 276
++#define __NR_shmctl 277
++
+ #ifdef __KERNEL__
+-#define NR_syscalls 266
++#define NR_syscalls 278
+
+
+ #define __ARCH_WANT_IPC_PARSE_VERSION
+diff -urN linux-2.6.20.4-0rig/include/linux/atmel_pdc.h linux-2.6.20.4-atmel/include/linux/atmel_pdc.h
+--- linux-2.6.20.4-0rig/include/linux/atmel_pdc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/linux/atmel_pdc.h 2007-03-24 16:39:16.000000000 +0100
+@@ -0,0 +1,36 @@
++/*
++ * include/linux/atmel_pdc.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Peripheral Data Controller (PDC) registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef ATMEL_PDC_H
++#define ATMEL_PDC_H
++
++#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
++#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
++#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
++#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
++#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
++#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
++#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
++#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
++
++#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
++#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
++#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
++#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
++#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
++
++#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
++
++#endif
+diff -urN linux-2.6.20.4-0rig/include/linux/fb.h linux-2.6.20.4-atmel/include/linux/fb.h
+--- linux-2.6.20.4-0rig/include/linux/fb.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/linux/fb.h 2007-03-24 16:42:29.000000000 +0100
+@@ -192,6 +192,7 @@
+ /* vtotal = 144d/288n/576i => PAL */
+ /* vtotal = 121d/242n/484i => NTSC */
+ #define FB_SYNC_ON_GREEN 32 /* sync on green */
++#define FB_SYNC_PCLK_RISING 64 /* pixel data sampled on rising pclk */
+
+ #define FB_VMODE_NONINTERLACED 0 /* non interlaced */
+ #define FB_VMODE_INTERLACED 1 /* interlaced */
+@@ -827,7 +828,7 @@
+ #define fb_writeq sbus_writeq
+ #define fb_memset sbus_memset_io
+
+-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
++#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
+
+ #define fb_readb __raw_readb
+ #define fb_readw __raw_readw
+diff -urN linux-2.6.20.4-0rig/include/linux/mtd/physmap.h linux-2.6.20.4-atmel/include/linux/mtd/physmap.h
+--- linux-2.6.20.4-0rig/include/linux/mtd/physmap.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/linux/mtd/physmap.h 2007-03-24 16:42:28.000000000 +0100
+@@ -18,9 +18,10 @@
+ #define __LINUX_MTD_PHYSMAP__
+
+ #include <linux/mtd/mtd.h>
+-#include <linux/mtd/map.h>
+ #include <linux/mtd/partitions.h>
+
++struct map_info;
++
+ struct physmap_flash_data {
+ unsigned int width;
+ void (*set_vpp)(struct map_info *, int);
+diff -urN linux-2.6.20.4-0rig/include/linux/spi/ads7846.h linux-2.6.20.4-atmel/include/linux/spi/ads7846.h
+--- linux-2.6.20.4-0rig/include/linux/spi/ads7846.h 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/include/linux/spi/ads7846.h 2007-03-24 16:39:16.000000000 +0100
+@@ -5,9 +5,17 @@
+ *
+ * It's OK if the min/max values are zero.
+ */
++enum ads7846_filter {
++ ADS7846_FILTER_OK,
++ ADS7846_FILTER_REPEAT,
++ ADS7846_FILTER_IGNORE,
++};
++
+ struct ads7846_platform_data {
+ u16 model; /* 7843, 7845, 7846. */
+ u16 vref_delay_usecs; /* 0 for external vref; etc */
++ int keep_vref_on:1; /* set to keep vref on for differential
++ * measurements as well */
+ u16 x_plate_ohms;
+ u16 y_plate_ohms;
+
+@@ -21,5 +29,9 @@
+ u16 debounce_rep; /* additional consecutive good readings
+ * required after the first two */
+ int (*get_pendown_state)(void);
++ int (*filter_init) (struct ads7846_platform_data *pdata,
++ void **filter_data);
++ int (*filter) (void *filter_data, int data_idx, int *val);
++ void (*filter_cleanup)(void *filter_data);
+ };
+
+diff -urN linux-2.6.20.4-0rig/include/video/atmel_lcdc.h linux-2.6.20.4-atmel/include/video/atmel_lcdc.h
+--- linux-2.6.20.4-0rig/include/video/atmel_lcdc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/include/video/atmel_lcdc.h 2007-03-24 16:39:16.000000000 +0100
+@@ -0,0 +1,193 @@
++/*
++ * include/video/atmel_lcdc.h
++ *
++ * Header file for AT91/AT32 LCD Controller
++ *
++ * Data structure and register user interface
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ATMEL_LCDC_H__
++#define __ATMEL_LCDC_H__
++
++ /* LCD Controller info data structure */
++struct atmel_lcdfb_info {
++ spinlock_t lock;
++ struct fb_info *info;
++ void __iomem *mmio;
++ unsigned long irq_base;
++ dma_addr_t map_dma;
++ void *map_cpu;
++ size_t map_size;
++
++ unsigned int guard_time;
++ struct platform_device *pdev;
++ struct clk *bus_clk;
++ struct clk *lcdc_clk;
++ unsigned int default_bpp;
++ unsigned int default_lcdcon2;
++ unsigned int default_dmacon;
++ int default_flags;
++ u8 power_control_pin;
++ struct fb_monspecs *default_monspecs;
++};
++
++#define ATMEL_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
++#define ATMEL_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
++#define ATMEL_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
++#define ATMEL_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
++#define ATMEL_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
++#define ATMEL_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
++
++#define ATMEL_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
++#define ATMEL_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
++#define ATMEL_LCDC_BLENGTH_OFFSET 24 /* Burst Length */
++#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
++
++#define ATMEL_LCDC_DMACON 0x1c /* DMA Control Register */
++#define ATMEL_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
++#define ATMEL_LCDC_DMARST (0x1 << 1) /* DMA Reset */
++#define ATMEL_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
++
++#define ATMEL_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
++#define ATMEL_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
++#define ATMEL_LCDC_CLKVAL_OFFSET 12 /* Clock Divider */
++#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
++#define ATMEL_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
++
++#define ATMEL_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
++#define ATMEL_LCDC_DISTYPE (3 << 0) /* Display Type */
++#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
++#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
++#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
++#define ATMEL_LCDC_SCANMOD (1 << 2) /* Scan Mode */
++#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
++#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
++#define ATMEL_LCDC_IFWIDTH (3 << 3) /*Interface Width */
++#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
++#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
++#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
++#define ATMEL_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
++#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
++#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
++#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
++#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
++#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
++#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
++#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
++#define ATMEL_LCDC_INVVD (1 << 8) /* LCD Data polarity */
++#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
++#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
++#define ATMEL_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
++#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
++#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
++#define ATMEL_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
++#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
++#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
++#define ATMEL_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
++#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
++#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
++#define ATMEL_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
++#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
++#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
++#define ATMEL_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
++#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
++#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
++#define ATMEL_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
++#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
++#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
++
++#define ATMEL_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
++#define ATMEL_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
++#define ATMEL_LCDC_VBP_OFFSET 8 /* Vertical Back Porch */
++#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
++#define ATMEL_LCDC_VPW_OFFSET 16 /* Vertical Synchronization Pulse Width */
++#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
++#define ATMEL_LCDC_VHDLY_OFFSET 24 /* Vertical to Horizontal Delay */
++#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
++
++#define ATMEL_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
++#define ATMEL_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
++#define ATMEL_LCDC_HPW_OFFSET 8 /* Horizontal Synchronization Pulse Width */
++#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
++#define ATMEL_LCDC_HFP_OFFSET 21 /* Horizontal Front Porch */
++#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
++
++#define ATMEL_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
++#define ATMEL_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
++#define ATMEL_LCDC_HOZVAL_OFFSET 21 /* Horizontal Size of LCD Module */
++#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
++
++#define ATMEL_LCDC_FIFO 0x0814 /* LCD FIFO Register */
++#define ATMEL_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
++
++#define ATMEL_LCDC_MVAL 0x0818 /* LCD Mode Toggle Rate Value Register */
++
++#define ATMEL_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
++#define ATMEL_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
++#define ATMEL_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
++#define ATMEL_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
++#define ATMEL_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
++#define ATMEL_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
++#define ATMEL_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
++#define ATMEL_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
++#define ATMEL_LCDC_DP1_2_VAL (0xff)
++#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
++#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
++#define ATMEL_LCDC_DP2_3_VAL (0xfff)
++#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
++#define ATMEL_LCDC_DP3_4_VAL (0xffff)
++#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
++#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
++
++#define ATMEL_LCDC_PWRCON 0x083c /* Power Control Register */
++#define ATMEL_LCDC_PWR (1 << 0) /* LCD Module Power Control */
++#define ATMEL_LCDC_GUARDT_OFFSET 1 /* Delay in Frame Period */
++#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
++#define ATMEL_LCDC_BUSY (1 << 31) /* LCD Busy */
++
++#define ATMEL_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
++#define ATMEL_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
++#define ATMEL_LCDC_PS_DIV1 (0 << 0)
++#define ATMEL_LCDC_PS_DIV2 (1 << 0)
++#define ATMEL_LCDC_PS_DIV4 (2 << 0)
++#define ATMEL_LCDC_PS_DIV8 (3 << 0)
++#define ATMEL_LCDC_POL (1 << 2) /* Polarity of output Pulse */
++#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
++#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
++#define ATMEL_LCDC_ENA (1 << 3) /* PWM generator Control */
++#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
++#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
++
++#define ATMEL_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
++#define ATMEL_LCDC_CVAL (0xff) /* PWM compare value */
++
++#define ATMEL_LCDC_IER 0x0848 /* Interrupt Enable Register */
++#define ATMEL_LCDC_IDR 0x084c /* Interrupt Disable Register */
++#define ATMEL_LCDC_IMR 0x0850 /* Interrupt Mask Register */
++#define ATMEL_LCDC_ISR 0x0854 /* Interrupt Status Register */
++#define ATMEL_LCDC_ICR 0x0858 /* Interrupt Clear Register */
++#define ATMEL_LCDC_LNI (1 << 0) /* Line Interrupt */
++#define ATMEL_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
++#define ATMEL_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
++#define ATMEL_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
++#define ATMEL_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
++#define ATMEL_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
++
++#define ATMEL_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
++
++#endif /* __ATMEL_LCDC_H__ */
+diff -urN linux-2.6.20.4-0rig/MAINTAINERS linux-2.6.20.4-atmel/MAINTAINERS
+--- linux-2.6.20.4-0rig/MAINTAINERS 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/MAINTAINERS 2007-03-24 16:43:49.000000000 +0100
+@@ -602,6 +602,11 @@
+ M: hskinnemoen@atmel.com
+ S: Supported
+
++ATMEL SPI DRIVER
++P: Haavard Skinnemoen
++M: hskinnemoen@atmel.com
++S: Supported
++
+ ATMEL WIRELESS DRIVER
+ P: Simon Kelley
+ M: simon@thekelleys.org.uk
+diff -urN linux-2.6.20.4-0rig/scripts/checkstack.pl linux-2.6.20.4-atmel/scripts/checkstack.pl
+--- linux-2.6.20.4-0rig/scripts/checkstack.pl 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/scripts/checkstack.pl 2007-03-24 16:42:29.000000000 +0100
+@@ -12,6 +12,7 @@
+ # sh64 port by Paul Mundt
+ # Random bits by Matt Mackall <mpm@selenic.com>
+ # M68k port by Geert Uytterhoeven and Andreas Schwab
++# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ # Usage:
+ # objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@
+ if ($arch eq 'arm') {
+ #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
+ $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++ } elsif ($arch eq 'avr32') {
++ #8000008a: 20 1d sub sp,4
++ #80000ca8: fa cd 05 b0 sub sp,sp,1456
++ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ } elsif ($arch =~ /^i[3456]86$/) {
+ #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
+ $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
+diff -urN linux-2.6.20.4-0rig/sound/avr32/ac97c.c linux-2.6.20.4-atmel/sound/avr32/ac97c.c
+--- linux-2.6.20.4-0rig/sound/avr32/ac97c.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/avr32/ac97c.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,1250 @@
++/*
++ * Driver for the Atmel AC97 Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#ifndef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++#include <sound/memalloc.h>
++#endif
++
++#include <asm/io.h>
++
++#include "ac97c.h"
++
++static DEFINE_MUTEX(opened_mutex);
++
++/* module parameters */
++static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
++static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
++static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
++
++module_param_array(index, int, NULL, 0444);
++MODULE_PARM_DESC(index, "Index value for AC97 controller");
++module_param_array(id, charp, NULL, 0444);
++MODULE_PARM_DESC(id, "ID string for AC97 controller");
++module_param_array(enable, bool, NULL, 0444);
++MODULE_PARM_DESC(enable, "Enable AC97 controller");
++
++#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
++#include <asm/dma-controller.h>
++
++struct atmel_ac97_dma_info {
++ struct dma_request_cyclic req_tx;
++ struct dma_request_cyclic req_rx;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++#endif
++
++
++typedef struct atmel_ac97 {
++ spinlock_t lock;
++ void __iomem *regs;
++ int period;
++
++ snd_pcm_substream_t *playback_substream;
++ snd_pcm_substream_t *capture_substream;
++ snd_card_t *card;
++ snd_pcm_t *pcm;
++ ac97_t *ac97;
++ ac97_bus_t *ac97_bus;
++ int irq;
++ int opened;
++ u64 cur_format;
++ unsigned int cur_rate;
++ struct clk *mck;
++ struct platform_device *pdev;
++ struct atmel_ac97_dma_info dma;
++} atmel_ac97_t;
++#define get_chip(card) ((atmel_ac97_t *)(card)->private_data)
++
++#define ac97c_writel(chip, reg, val) \
++ __raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg) \
++ __raw_readl((chip)->regs + AC97C_##reg)
++
++/* PCM part */
++
++static snd_pcm_hardware_t snd_atmel_ac97_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ |SNDRV_PCM_INFO_MMAP
++ |SNDRV_PCM_INFO_MMAP_VALID
++ |SNDRV_PCM_INFO_BLOCK_TRANSFER
++ |SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 6,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ .period_bytes_max = 64*1024,
++#else
++ .period_bytes_max = 4095,
++#endif
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++static snd_pcm_hardware_t snd_atmel_ac97_capture_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ |SNDRV_PCM_INFO_MMAP
++ |SNDRV_PCM_INFO_MMAP_VALID
++ |SNDRV_PCM_INFO_BLOCK_TRANSFER
++ |SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ .period_bytes_max = 64*1024,
++#else
++ .period_bytes_max = 4095,
++#endif
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++/* Joint full duplex variables */
++unsigned int hw_rates[1];
++unsigned int hw_formats[1];
++struct snd_pcm_hw_constraint_list hw_constraint_rates;
++struct snd_pcm_hw_constraint_list hw_constraint_formats;
++
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ snd_pcm_runtime_t *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_playback_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL<<chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->playback_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int
++snd_atmel_ac97_capture_open(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ snd_pcm_runtime_t *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_capture_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL<<chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->capture_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_close(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_close(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_params(snd_pcm_substream_t *substream,
++ snd_pcm_hw_params_t *hw_params)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++ int err;
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return err;
++#else
++ int pg;
++ size_t size = params_buffer_bytes(hw_params);
++ struct snd_pcm_runtime *runtime;
++ struct snd_dma_buffer *dmab = NULL;
++
++ substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
++ snd_assert(substream != NULL, return -EINVAL);
++ runtime = substream->runtime;
++ snd_assert(runtime != NULL, return -EINVAL);
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ /* check if buffer is already allocated */
++ if (runtime->dma_buffer_p) {
++ size_t size_previouse;
++ int pg_previouse;
++
++ /* new buffer is smaler than previouse allocated buffer */
++ if (runtime->dma_buffer_p->bytes >= size) {
++ runtime->dma_bytes = size;
++ return 0; /* don't change buffer size */
++ }
++
++ size_previouse = runtime->dma_buffer_p->bytes;
++ pg_previouse = get_order(size_previouse);
++
++ dma_free_coherent(runtime->dma_buffer_p->dev.dev,
++ PAGE_SIZE << pg_previouse,
++ runtime->dma_buffer_p->area,
++ runtime->dma_buffer_p->addr);
++
++ kfree(runtime->dma_buffer_p);
++ }
++
++ dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
++ if (!dmab)
++ return -ENOMEM;
++
++ dmab->dev = substream->dma_buffer.dev;
++ dmab->bytes = 0;
++
++ pg = get_order(size);
++
++ dmab->area = dma_alloc_coherent(
++ substream->dma_buffer.dev.dev,
++ PAGE_SIZE << pg,
++ (dma_addr_t *)&dmab->addr,
++ GFP_KERNEL);
++
++ if (!dmab->area) {
++ kfree(dmab);
++ return -ENOMEM;
++ }
++
++ dmab->bytes = size;
++
++ snd_pcm_set_runtime_buffer(substream, dmab);
++ runtime->dma_bytes = size;
++ return 1;
++#endif
++}
++
++static int snd_atmel_ac97_capture_hw_params(snd_pcm_substream_t *substream,
++ snd_pcm_hw_params_t *hw_params)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++ int err;
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return err;
++#else
++ int pg;
++ size_t size = params_buffer_bytes(hw_params);
++ struct snd_pcm_runtime *runtime;
++ struct snd_dma_buffer *dmab = NULL;
++
++ substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
++ snd_assert(substream != NULL, return -EINVAL);
++ runtime = substream->runtime;
++ snd_assert(runtime != NULL, return -EINVAL);
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ /* check if buffer is already allocated */
++ if (runtime->dma_buffer_p) {
++ size_t size_previouse;
++ int pg_previouse;
++
++ /* new buffer is smaler than previouse allocated buffer */
++ if (runtime->dma_buffer_p->bytes >= size) {
++ runtime->dma_bytes = size;
++ return 0; /* don't change buffer size */
++ }
++
++ size_previouse = runtime->dma_buffer_p->bytes;
++ pg_previouse = get_order(size_previouse);
++
++ dma_free_coherent(runtime->dma_buffer_p->dev.dev,
++ PAGE_SIZE << pg_previouse,
++ runtime->dma_buffer_p->area,
++ runtime->dma_buffer_p->addr);
++
++ kfree(runtime->dma_buffer_p);
++ }
++
++ dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
++ if (!dmab)
++ return -ENOMEM;
++
++ dmab->dev = substream->dma_buffer.dev;
++ dmab->bytes = 0;
++
++ pg = get_order(size);
++
++ dmab->area = dma_alloc_coherent(
++ substream->dma_buffer.dev.dev,
++ PAGE_SIZE << pg,
++ (dma_addr_t *)&dmab->addr,
++ GFP_KERNEL);
++
++ if (!dmab->area) {
++ kfree(dmab);
++ return -ENOMEM;
++ }
++
++ dmab->bytes = size;
++
++ snd_pcm_set_runtime_buffer(substream, dmab);
++ runtime->dma_bytes = size;
++ return 1;
++#endif
++}
++
++static int snd_atmel_ac97_playback_hw_free(snd_pcm_substream_t *substream)
++{
++#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++ return snd_pcm_lib_free_pages(substream);
++#else
++ int pg;
++ struct snd_pcm_runtime *runtime;
++ struct snd_dma_buffer *dmab = NULL;
++
++ snd_assert(substream != NULL, return -EINVAL);
++ runtime = substream->runtime;
++ snd_assert(runtime != NULL, return -EINVAL);
++ dmab = runtime->dma_buffer_p;
++
++ if (!dmab)
++ return 0;
++
++ if (!dmab->area)
++ return 0;
++
++ pg = get_order(dmab->bytes);
++ dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
++ kfree(runtime->dma_buffer_p);
++ snd_pcm_set_runtime_buffer(substream, NULL);
++ return 0;
++#endif
++}
++
++static int snd_atmel_ac97_capture_hw_free(snd_pcm_substream_t *substream)
++{
++
++#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++ return snd_pcm_lib_free_pages(substream);
++#else
++ int pg;
++ struct snd_pcm_runtime *runtime;
++ struct snd_dma_buffer *dmab = NULL;
++
++ snd_assert(substream != NULL, return -EINVAL);
++ runtime = substream->runtime;
++ snd_assert(runtime != NULL, return -EINVAL);
++ dmab = runtime->dma_buffer_p;
++
++ if (!dmab)
++ return 0;
++
++ if (!dmab->area)
++ return 0;
++
++ pg = get_order(dmab->bytes);
++ dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
++ kfree(runtime->dma_buffer_p);
++ snd_pcm_set_runtime_buffer(substream, NULL);
++ return 0;
++#endif
++}
++
++static int snd_atmel_ac97_playback_prepare(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ snd_pcm_runtime_t *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_TO_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, OCA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format){
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~AC97C_CMR_CEM_LITTLE;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ /* Initialize and start the PDC */
++ ac97c_writel(chip, CATPR, runtime->dma_addr);
++ ac97c_writel(chip, CATCR, block_size / 4);
++ ac97c_writel(chip, CATNPR, runtime->dma_addr + block_size);
++ ac97c_writel(chip, CATNCR, block_size / 4);
++ ac97c_writel(chip, PTCR, PDC_PTCR_TXTEN);
++ /* Enable Channel A interrupts */
++ ac97c_writel(chip, IER, AC97C_SR_CAEVT);
++#else
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_tx.buffer_size = buffer_size;
++ chip->dma.req_tx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_tx.buffer_size !=
++ (chip->dma.req_tx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_tx.buffer_start = runtime->dma_addr;
++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.dev_id = chip;
++#endif
++
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_prepare(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ snd_pcm_runtime_t *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_FROM_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, ICA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~(AC97C_CMR_CEM_LITTLE);
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~(AC97C_MR_VRA);
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ /* Initialize and start the PDC */
++ ac97c_writel(chip, CARPR, runtime->dma_addr);
++ ac97c_writel(chip, CARCR, block_size / 4);
++ ac97c_writel(chip, CARNPR, runtime->dma_addr + block_size);
++ ac97c_writel(chip, CARNCR, block_size / 4);
++ ac97c_writel(chip, PTCR, PDC_PTCR_RXEN);
++ /* Enable Channel A interrupts */
++ ac97c_writel(chip, IER, AC97C_SR_CAEVT);
++#else
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_rx.buffer_size = buffer_size;
++ chip->dma.req_rx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_rx.buffer_size !=
++ (chip->dma.req_rx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_rx.buffer_start = runtime->dma_addr;
++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.dev_id = chip;
++#endif
++
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_trigger(snd_pcm_substream_t *substream, int cmd)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++ &chip->dma.req_tx);
++ dma_start_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ camr |= (AC97C_CMR_CENA
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ |AC97C_CMR_TXRDY
++#endif
++ );
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ if (chip->opened <= 1) {
++ camr &= ~(AC97C_CMR_CENA
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ |AC97C_CMR_TXRDY
++#endif
++ );
++ }
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ else {
++ camr &= ~(AC97C_CMR_TXRDY);
++ }
++#endif
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++static int snd_atmel_ac97_capture_trigger(snd_pcm_substream_t *substream, int cmd)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++ &chip->dma.req_rx);
++ dma_start_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ camr |= (AC97C_CMR_CENA
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ | AC97C_CMR_RXRDY
++#endif
++ );
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ mutex_lock(&opened_mutex);
++ if (chip->opened <= 1) {
++ camr &= ~(AC97C_CMR_CENA
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ | AC97C_CMR_RXRDY
++#endif
++ );
++ }
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ else {
++ camr &= ~(AC97C_CSR_RXRDY);
++ }
++#endif
++ mutex_unlock(&opened_mutex);
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ snd_pcm_runtime_t *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ bytes = ac97c_readl(chip, CATPR) - runtime->dma_addr;
++#else
++ bytes = (dma_get_current_pos
++ (chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel) - runtime->dma_addr);
++#endif
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(snd_pcm_substream_t *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ snd_pcm_runtime_t *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ bytes = ac97c_readl(chip, CARPR) - runtime->dma_addr;
++#else
++ bytes = (dma_get_current_pos
++ (chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) -
++ runtime->dma_addr);
++#endif
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++
++ return pos;
++}
++
++static snd_pcm_ops_t atmel_ac97_playback_ops = {
++ .open = snd_atmel_ac97_playback_open,
++ .close = snd_atmel_ac97_playback_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_playback_hw_params,
++ .hw_free = snd_atmel_ac97_playback_hw_free,
++ .prepare = snd_atmel_ac97_playback_prepare,
++ .trigger = snd_atmel_ac97_playback_trigger,
++ .pointer = snd_atmel_ac97_playback_pointer,
++};
++
++static snd_pcm_ops_t atmel_ac97_capture_ops = {
++ .open = snd_atmel_ac97_capture_open,
++ .close = snd_atmel_ac97_capture_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_capture_hw_params,
++ .hw_free = snd_atmel_ac97_capture_hw_free,
++ .prepare = snd_atmel_ac97_capture_prepare,
++ .trigger = snd_atmel_ac97_capture_trigger,
++ .pointer = snd_atmel_ac97_capture_pointer,
++};
++
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++ /* Playback */
++ {
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)
++ | (1 << AC97_SLOT_PCM_CENTER)
++ | (1 << AC97_SLOT_PCM_SLEFT)
++ | (1 << AC97_SLOT_PCM_SRIGHT)
++ | (1 << AC97_SLOT_LFE)),
++ } }
++ },
++ /* PCM in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)),
++ } }
++ },
++ /* Mic in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = (1<<AC97_SLOT_MIC),
++ } }
++ },
++};
++
++static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip)
++{
++ snd_pcm_t *pcm;
++ int err;
++
++ err = snd_ac97_pcm_assign(chip->ac97_bus,
++ ARRAY_SIZE(atmel_ac97_pcm_defs),
++ atmel_ac97_pcm_defs);
++ if (err)
++ return err;
++
++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++ if (err)
++ return err;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &atmel_ac97_playback_ops);
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++ &atmel_ac97_capture_ops);
++
++#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev,
++ 128 * 1024, 128 * 1024);
++#endif
++
++ pcm->private_data = chip;
++ pcm->info_flags = 0;
++ strcpy(pcm->name, "Atmel-AC97");
++ chip->pcm = pcm;
++
++ return 0;
++}
++
++/* Mixer part */
++static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip)
++{
++ int err;
++ ac97_template_t template;
++
++ memset(&template, 0, sizeof(template));
++ template.private_data = chip;
++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++ return err;
++}
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++static irqreturn_t snd_atmel_ac97_interrupt(int irq, void *dev_id,
++ struct pt_regs *regs)
++{
++ atmel_ac97_t *chip = dev_id;
++ unsigned long status;
++
++ status = ac97c_readl(chip, SR);
++
++ if (status & AC97C_SR_CAEVT) {
++ snd_pcm_runtime_t *runtime;
++ int offset, next_period, block_size;
++ unsigned long casr;
++
++ /* FIXME: separate playback from capture */
++ runtime = chip->playback_substream->runtime;
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ casr = ac97c_readl(chip, CASR);
++
++ if (casr & AC97C_CSR_ENDTX) {
++ chip->period++;
++ if (chip->period == runtime->periods)
++ chip->period = 0;
++ next_period = chip->period + 1;
++ if (next_period == runtime->periods)
++ next_period = 0;
++
++ offset = block_size * next_period;
++
++ ac97c_writel(chip, CATNPR,
++ runtime->dma_addr + offset);
++ ac97c_writel(chip, CATNCR, block_size / 4);
++
++ snd_pcm_period_elapsed(chip->playback_substream);
++ }
++ else if (casr & AC97C_CSR_ENDRX) {
++ chip->period++;
++ if (chip->period == runtime->periods)
++ chip->period = 0;
++ next_period = chip->period + 1;
++ if (next_period == runtime->periods)
++ next_period = 0;
++
++ offset = block_size * next_period;
++
++ ac97c_writel(chip, CARNPR,
++ runtime->dma_addr + offset);
++ ac97c_writel(chip, CARNCR, block_size / 4);
++
++ snd_pcm_period_elapsed(chip->capture_substream);
++ } else {
++ snd_printk(KERN_INFO
++ "atmel-ac97: spurious interrupt, status = 0x%08lx\n",
++ (unsigned long)casr);
++ }
++ } else {
++ snd_printk(KERN_INFO
++ "atmel-ac97: spurious interrupt, status = 0x%08lx\n",
++ status);
++ }
++
++ (volatile int)ac97c_readl(chip, SR);
++
++ return IRQ_HANDLED;
++}
++
++#else
++
++static void atmel_ac97_error(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++
++ printk(KERN_WARNING
++ "DMA Controller error, channel %d (AC97C)\n",
++ req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ atmel_ac97_t *chip = req->dev_id;
++ if (req->periph_id == chip->dma.tx_periph_id)
++ snd_pcm_period_elapsed(chip->playback_substream);
++ else
++ snd_pcm_period_elapsed(chip->capture_substream);
++}
++
++#endif
++
++/* CODEC part */
++
++static void snd_atmel_ac97_write(ac97_t *ac97, unsigned short reg,
++ unsigned short val)
++{
++ atmel_ac97_t *chip = ac97->private_data;
++ unsigned long word;
++ int timeout = 40;
++
++ word = (reg & 0x7f) << 16 | val;
++
++ do {
++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++ ac97c_writel(chip, COTHR, word);
++ return;
++ }
++ udelay(1);
++ } while (--timeout);
++
++ snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n");
++}
++
++static unsigned short snd_atmel_ac97_read(ac97_t *ac97,
++ unsigned short reg)
++{
++ atmel_ac97_t *chip = ac97->private_data;
++ unsigned long word;
++ int timeout = 40;
++ int write = 10;
++
++ word = (0x80 | (reg & 0x7f)) << 16;
++
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++ ac97c_readl(chip, CORHR);
++
++retry_write:
++ timeout = 40;
++
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++ ac97c_writel(chip, COTHR, word);
++ goto read_reg;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++read_reg:
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){
++ unsigned short val = ac97c_readl(chip, CORHR);
++ return val;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++timed_out:
++ snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n");
++ return 0xffff;
++}
++
++static void snd_atmel_ac97_reset(atmel_ac97_t *chip)
++{
++ /* TODO: Perform hard reset of codec as well */
++ ac97c_writel(chip, MR, AC97C_MR_WRST);
++ mdelay(1);
++ ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
++
++static void snd_atmel_ac97_destroy(snd_card_t *card)
++{
++ atmel_ac97_t *chip = get_chip(card);
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ if (chip->irq != -1)
++ free_irq(chip->irq, chip);
++#endif
++ if (chip->regs)
++ iounmap(chip->regs);
++
++ if (chip->mck) {
++ clk_disable(chip->mck);
++ clk_put(chip->mck);
++ }
++
++#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ if (chip->dma.req_tx.req.dmac){
++ dma_release_channel(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ }
++ if (chip->dma.req_rx.req.dmac) {
++ dma_release_channel(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ }
++#endif
++}
++
++static int __devinit snd_atmel_ac97_create(snd_card_t *card,
++ struct platform_device *pdev)
++{
++ static ac97_bus_ops_t ops = {
++ .write = snd_atmel_ac97_write,
++ .read = snd_atmel_ac97_read,
++ };
++ atmel_ac97_t *chip = get_chip(card);
++ struct resource *regs;
++ struct clk *mck;
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ int irq;
++#endif
++ int err;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++#endif
++
++ mck = clk_get(&pdev->dev, "mck");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ clk_enable(mck);
++ chip->mck = mck;
++
++ card->private_free = snd_atmel_ac97_destroy;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
++ chip->irq = -1;
++
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ err = request_irq(irq, snd_atmel_ac97_interrupt, 0,
++ "ac97", chip);
++ if (err) {
++ snd_printk("unable to request IRQ%d\n", irq);
++ return err;
++ }
++ chip->irq = irq;
++#endif
++
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ return -ENOMEM;
++
++ snd_card_set_dev(card, &pdev->dev);
++
++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++ return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++{
++ static int dev;
++ snd_card_t *card;
++ atmel_ac97_t *chip;
++ int err;
++ int ch;
++
++ if (dev >= SNDRV_CARDS)
++ return -ENODEV;
++ if (!enable[dev]) {
++ dev++;
++ return -ENOENT;
++ }
++
++ err = -ENOMEM;
++
++ mutex_init(&opened_mutex);
++
++ card = snd_card_new(index[dev], id[dev], THIS_MODULE,
++ sizeof(atmel_ac97_t));
++ if (!card)
++ goto out;
++ chip = get_chip(card);
++
++ err = snd_atmel_ac97_create(card, pdev);
++ if (err)
++ goto out_free_card;
++
++ snd_atmel_ac97_reset(chip);
++
++ err = snd_atmel_ac97_mixer_new(chip);
++ if (err)
++ goto out_free_card;
++
++ err = snd_atmel_ac97_pcm_new(chip);
++ if (err)
++ goto out_free_card;
++
++#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ /* TODO: Get this information from the platform device */
++ chip->dma.req_tx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_tx.req.dmac) {
++ printk(KERN_ERR
++ "atmel-ac97c: No DMA controller for TX, aborting\n");
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_rx.req.dmac) {
++ snd_printk(KERN_ERR
++ "atmel-ac97c: No DMA controller available for RX, aborting\n");
++ goto out_free_card;
++ }
++
++ chip->dma.rx_periph_id = 3;
++ chip->dma.tx_periph_id = 4;
++
++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++ if (ch < 0) {
++ printk(KERN_ERR
++ "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n");
++ goto out_free_card;
++ }
++ chip->dma.req_tx.req.channel = ch;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_tx.req.error = atmel_ac97_error;
++
++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++ if (ch < 0) {
++ snd_printk(KERN_ERR
++ "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n");
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.channel = ch;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_rx.req.error = atmel_ac97_error;
++#endif
++
++ strcpy(card->driver, "ac97c");
++ strcpy(card->shortname, "Atmel-AC97");
++#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
++ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, irq %i",
++ chip->regs, chip->irq);
++#else
++ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i",
++ chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id);
++#endif
++
++ err = snd_card_register(card);
++ if (err)
++ goto out_free_card;
++
++ platform_set_drvdata(pdev, card);
++ dev++;
++ return 0;
++
++out_free_card:
++ snd_card_free(card);
++out:
++ return err;
++}
++
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++{
++ snd_card_t *card = platform_get_drvdata(pdev);
++
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver atmel_ac97_driver = {
++ .probe = snd_atmel_ac97_probe,
++ .remove = __devexit_p(snd_atmel_ac97_remove),
++ .driver = {
++ .name = "ac97c",
++ },
++};
++
++static int __init atmel_ac97_init(void)
++{
++ return platform_driver_register(&atmel_ac97_driver);
++}
++
++static void __exit atmel_ac97_exit(void)
++{
++ platform_driver_unregister(&atmel_ac97_driver);
++}
++
++module_init(atmel_ac97_init);
++module_exit(atmel_ac97_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff -urN linux-2.6.20.4-0rig/sound/avr32/ac97c.h linux-2.6.20.4-atmel/sound/avr32/ac97c.h
+--- linux-2.6.20.4-0rig/sound/avr32/ac97c.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/avr32/ac97c.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR 0x08
++#define AC97C_ICA 0x10
++#define AC97C_OCA 0x14
++#define AC97C_CARHR 0x20
++#define AC97C_CATHR 0x24
++#define AC97C_CASR 0x28
++#define AC97C_CAMR 0x2c
++#define AC97C_CBRHR 0x30
++#define AC97C_CBTHR 0x34
++#define AC97C_CBSR 0x38
++#define AC97C_CBMR 0x3c
++#define AC97C_CORHR 0x40
++#define AC97C_COTHR 0x44
++#define AC97C_COSR 0x48
++#define AC97C_COMR 0x4c
++#define AC97C_SR 0x50
++#define AC97C_IER 0x54
++#define AC97C_IDR 0x58
++#define AC97C_IMR 0x5c
++#define AC97C_VERSION 0xfc
++
++#define AC97C_CATPR PDC_TPR
++#define AC97C_CATCR PDC_TCR
++#define AC97C_CATNPR PDC_TNPR
++#define AC97C_CATNCR PDC_TNCR
++#define AC97C_CARPR PDC_RPR
++#define AC97C_CARCR PDC_RCR
++#define AC97C_CARNPR PDC_RNPR
++#define AC97C_CARNCR PDC_RNCR
++#define AC97C_PTCR PDC_PTCR
++
++#define AC97C_MR_ENA (1 << 0)
++#define AC97C_MR_WRST (1 << 1)
++#define AC97C_MR_VRA (1 << 2)
++
++#define AC97C_CSR_TXRDY (1 << 0)
++#define AC97C_CSR_UNRUN (1 << 2)
++#define AC97C_CSR_RXRDY (1 << 4)
++#define AC97C_CSR_ENDTX (1 << 10)
++#define AC97C_CSR_ENDRX (1 << 14)
++
++#define AC97C_CMR_SIZE_20 (0 << 16)
++#define AC97C_CMR_SIZE_18 (1 << 16)
++#define AC97C_CMR_SIZE_16 (2 << 16)
++#define AC97C_CMR_SIZE_10 (3 << 16)
++#define AC97C_CMR_CEM_LITTLE (1 << 18)
++#define AC97C_CMR_CEM_BIG (0 << 18)
++#define AC97C_CMR_CENA (1 << 21)
++#define AC97C_CMR_PDCEN (1 << 22)
++
++#define AC97C_SR_CAEVT (1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel) \
++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE 0x0
++#define AC97C_CHANNEL_A 0x1
++#define AC97C_CHANNEL_B 0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff -urN linux-2.6.20.4-0rig/sound/avr32/at73c213.c linux-2.6.20.4-atmel/sound/avr32/at73c213.c
+--- linux-2.6.20.4-0rig/sound/avr32/at73c213.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/avr32/at73c213.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,1295 @@
++/*
++ * Driver for the at73c213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#undef DEBUG
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kmod.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/initval.h>
++#include <sound/driver.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#ifndef SND_AT73C213_USE_ALSA_MALLOC_CALLS
++#include <sound/memalloc.h>
++#endif
++
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/processor.h>
++
++#include "at73c213.h"
++
++/* module parameters */
++static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
++static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
++static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
++
++/* Register defines */
++#define PIOA_BASE 0xFFE02800
++#define SSC0_BASE 0xFFE01C00
++#define PM_BASE 0xFFF00000
++
++#define PM_CKSEL 0x04
++#define PM_APBAMASK 0x10
++#define PM_GCCTRL 0x60
++
++#define PIO_PER 0x00
++#define PIO_PDR 0x04
++#define PIO_PUER 0x64
++#define PIO_ASR 0x70
++#define PIO_BSR 0x74
++
++#define SSC_CMR 0x04
++#define SSC_CR 0x00
++#define SSC_TCMR 0x18
++#define SSC_TFMR 0x1C
++
++/* SSC register definitions */
++#define SSC_CR 0x00
++#define SSC_CMR 0x04
++#define SSC_TCMR 0x18
++#define SSC_TFMR 0x1C
++#define SSC_THR 0x24
++#define SSC_SR 0x40
++#define SSC_IER 0x44
++#define SSC_IDR 0x48
++#define SSC_IMR 0x4C
++
++/* SSC fields definitions */
++#define SSC_CR_TXEN 0x00000100
++#define SSC_CR_TXDIS 0x00000200
++#define SSC_CR_SWRST 0x00008000
++
++/* SSC interrupt definitions */
++#define SSC0_IRQ 10
++#define SSC_INT_ENDTX 0x00000004
++#define SSC_INT_TXBUFE 0x00000008
++
++/* PDC register definitions */
++#define PDC_RPR 0x100
++#define PDC_RCR 0x104
++#define PDC_TPR 0x108
++#define PDC_TCR 0x10c
++#define PDC_RNPR 0x110
++#define PDC_RNCR 0x114
++#define PDC_TNPR 0x118
++#define PDC_TNCR 0x11c
++#define PDC_PTCR 0x120
++#define PDC_PTSR 0x124
++
++/* PDC fields definitions */
++#define PDC_PTCR_RXTEN 0x0001
++#define PDC_PTCR_RXTDIS 0x0002
++#define PDC_PTCR_TXTEN 0x0100
++#define PDC_PTCR_TXTDIS 0x0200
++
++static int bitrate;
++static int gclk_div;
++static int ssc_div;
++static int spi = 0;
++static int ssc = 1;
++
++module_param(spi, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
++MODULE_PARM_DESC(spi, "Which SPI interface to use to communicate with the at73c213");
++module_param(ssc, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
++MODULE_PARM_DESC(ssc, "Which SSC interface to use to communicate with the at73c213");
++
++/* Initial AT73C213 register values */
++static unsigned char snd_at73c213_original_image[18] =
++{
++ 0x00, /* 00 - CTRL */
++ 0x05, /* 01 - LLIG */
++ 0x05, /* 02 - RLIG */
++ 0x08, /* 03 - LPMG */
++ 0x08, /* 04 - RPMG */
++ 0x00, /* 05 - LLOG */
++ 0x00, /* 06 - RLOG */
++ 0x22, /* 07 - OLC */
++ 0x09, /* 08 - MC */
++ 0x00, /* 09 - CSFC */
++ 0x00, /* 0A - MISC */
++ 0x00, /* 0B - */
++ 0x00, /* 0C - PRECH */
++ 0x05, /* 0D - AUXG */
++ 0x00, /* 0E - */
++ 0x00, /* 0F - */
++ 0x00, /* 10 - RST */
++ 0x00, /* 11 - PA_CTRL */
++};
++
++/* chip-specific data */
++struct snd_at73c213 {
++ snd_card_t *card;
++ snd_pcm_t *pcm;
++ snd_pcm_substream_t *substream;
++ int irq;
++ int period;
++ void __iomem *regs;
++ struct clk *ssc_clk;
++ struct spi_device *spi;
++ u8 spi_wbuffer[2];
++ u8 spi_rbuffer[2];
++ /* image of the SPI registers in AT73C213 */
++ u8 image[18];
++ spinlock_t lock;
++ struct platform_device *pdev;
++};
++
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++ struct spi_message msg;
++ struct spi_transfer msg_xfer = {
++ .len = 2,
++ .cs_change = 0,
++ };
++
++ spi_message_init(&msg);
++
++ chip->spi_wbuffer[0] = reg;
++ chip->spi_wbuffer[1] = val;
++
++ msg_xfer.tx_buf = chip->spi_wbuffer;
++ msg_xfer.rx_buf = chip->spi_rbuffer;
++ spi_message_add_tail(&msg_xfer, &msg);
++
++ return spi_sync(chip->spi, &msg);
++}
++
++#define write_reg(_spi, reg, val) \
++ do { \
++ retval = snd_at73c213_write_reg(_spi, reg, val); \
++ if (retval) \
++ goto out; \
++ } while (0)
++
++static snd_pcm_hardware_t snd_at73c213_playback_hw = {
++ .info = SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_BE,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .rate_min = 8000, /* This will be overwritten with bitrate */
++ .rate_max = 50000, /* This will be overwritten with bitrate */
++ .channels_min = 2,
++ .channels_max = 2,
++ .buffer_bytes_max = 64 * 1024 - 1,
++ .period_bytes_min = 512,
++ .period_bytes_max = 64 * 1024 - 1,
++ .periods_min = 4,
++ .periods_max = 1024,
++};
++
++/* calculate and set bitrate and divisions */
++static int snd_at73c213_set_bitrate_and_div(void)
++{
++ extern struct avr32_cpuinfo boot_cpu_data;
++ unsigned long pll0_hz, apba_hz;
++ unsigned long apba_realdiv, gclk_realdiv, ssc_realdiv, wanted_bitrate;
++ char cpusel, ahbsel, apbasel;
++ int regval;
++
++ regval = __raw_readl((void __iomem *)PM_BASE + PM_CKSEL);
++ wanted_bitrate = 48000;
++
++ cpusel = regval & 0x07;
++ ahbsel = (regval>>8) & 0x07;
++ apbasel = (regval>>16) & 0x07;
++
++ /* FIXME: Use the clk framework for this */
++ if ((regval&(1<<7)) != 0) {
++ pll0_hz = clk_get_rate(boot_cpu_data.clk)/(1<<(cpusel+1));
++ } else {
++ pll0_hz = clk_get_rate(boot_cpu_data.clk);
++ }
++
++ if ((regval&(1<<23)) != 0) {
++ apba_hz = pll0_hz/(1<<(apbasel+1));
++ apba_realdiv = (1<<(apbasel+1));
++ } else {
++ apba_hz = pll0_hz;
++ apba_realdiv = 1;
++ }
++
++calculate:
++ /* Adjust bitrate as close as possible to 48000 Hz */
++ gclk_realdiv = pll0_hz/(wanted_bitrate*256);
++ ssc_realdiv = 2 * apba_realdiv * gclk_realdiv;
++
++ if ((gclk_realdiv % 2) == 0)
++ goto setbitrates;
++
++ if(wanted_bitrate >= 22050 && wanted_bitrate <= 48000)
++ wanted_bitrate -= 50;
++ else if (wanted_bitrate < 22050)
++ wanted_bitrate = 48050;
++ else if (wanted_bitrate <= 50000)
++ wanted_bitrate += 50;
++ else {
++ printk(KERN_ERR "at73c213 could not set dividers for a valid bitrate\n");
++ return -EINVAL;
++ }
++
++ goto calculate;
++
++setbitrates:
++ bitrate = pll0_hz/(gclk_realdiv*256);
++ gclk_div = (gclk_realdiv/2)-1;
++ ssc_realdiv = 2*apba_realdiv*gclk_realdiv;
++ ssc_div = ssc_realdiv/(2*apba_realdiv);
++
++ printk(KERN_INFO "at73c213: bitrate is %d Hz\n", bitrate);
++
++ return 0;
++}
++
++/* open callback */
++static int snd_at73c213_pcm_open(snd_pcm_substream_t *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ snd_pcm_runtime_t *runtime = substream->runtime;
++
++ snd_at73c213_playback_hw.rate_min = bitrate;
++ snd_at73c213_playback_hw.rate_max = bitrate;
++ runtime->hw = snd_at73c213_playback_hw;
++ chip->substream = substream;
++
++ return 0;
++}
++
++/* close callback */
++static int snd_at73c213_pcm_close(snd_pcm_substream_t *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ chip->substream = NULL;
++ return 0;
++}
++
++/* hw_params callback */
++static int snd_at73c213_pcm_hw_params(snd_pcm_substream_t *substream,
++ snd_pcm_hw_params_t *hw_params)
++{
++#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
++ return snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++#else
++ int pg;
++ size_t size = params_buffer_bytes(hw_params);
++ struct snd_pcm_runtime *runtime;
++ struct snd_dma_buffer *dmab = NULL;
++
++ substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
++ snd_assert(substream != NULL, return -EINVAL);
++ runtime = substream->runtime;
++ snd_assert(runtime != NULL, return -EINVAL);
++
++ /* check if buffer is already allocated */
++ if (runtime->dma_buffer_p) {
++ size_t size_previouse;
++ int pg_previouse;
++
++ /* new buffer is smaler than previouse allocated buffer */
++ if (runtime->dma_buffer_p->bytes >= size) {
++ runtime->dma_bytes = size;
++ return 0; /* don't change buffer size */
++ }
++
++ size_previouse = runtime->dma_buffer_p->bytes;
++ pg_previouse = get_order(size_previouse);
++
++ dma_free_coherent(runtime->dma_buffer_p->dev.dev,
++ PAGE_SIZE << pg_previouse,
++ runtime->dma_buffer_p->area,
++ runtime->dma_buffer_p->addr);
++
++ kfree(runtime->dma_buffer_p);
++ }
++
++ dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
++ if (!dmab)
++ return -ENOMEM;
++
++ dmab->dev = substream->dma_buffer.dev;
++ dmab->bytes = 0;
++
++ pg = get_order(size);
++
++ dmab->area = dma_alloc_coherent(
++ substream->dma_buffer.dev.dev,
++ PAGE_SIZE << pg,
++ (dma_addr_t *)&dmab->addr,
++ GFP_KERNEL);
++
++ if (!dmab->area) {
++ kfree(dmab);
++ return -ENOMEM;
++ }
++
++ dmab->bytes = size;
++ snd_pcm_set_runtime_buffer(substream, dmab);
++ runtime->dma_bytes = size;
++ return 1;
++#endif
++}
++
++/* hw_free callback */
++static int snd_at73c213_pcm_hw_free(snd_pcm_substream_t *substream)
++{
++#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
++ return snd_pcm_lib_free_pages(substream);
++#else
++ int pg;
++ struct snd_pcm_runtime *runtime;
++ struct snd_dma_buffer *dmab = NULL;
++
++ snd_assert(substream != NULL, return -EINVAL);
++ runtime = substream->runtime;
++ snd_assert(runtime != NULL, return -EINVAL);
++ dmab = runtime->dma_buffer_p;
++
++ if (!dmab)
++ return 0;
++
++ if (!dmab->area)
++ return 0;
++
++ pg = get_order(dmab->bytes);
++ dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
++ kfree(runtime->dma_buffer_p);
++ snd_pcm_set_runtime_buffer(substream, NULL);
++ return 0;
++#endif
++}
++
++/* prepare callback */
++static int snd_at73c213_pcm_prepare(snd_pcm_substream_t *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ snd_pcm_runtime_t *runtime = substream->runtime;
++ int block_size;
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ chip->period = 0;
++
++ /* Make sure that our data are actually readable by the SSC */
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size, DMA_TO_DEVICE);
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr + block_size,
++ block_size, DMA_TO_DEVICE);
++
++ __raw_writel(runtime->dma_addr, chip->regs + PDC_TPR);
++ __raw_writel(runtime->period_size * 2, chip->regs + PDC_TCR);
++ __raw_writel(runtime->dma_addr + block_size, chip->regs + PDC_TNPR);
++ __raw_writel(runtime->period_size * 2, chip->regs + PDC_TNCR);
++
++ return 0;
++}
++
++/* trigger callback */
++static int snd_at73c213_pcm_trigger(snd_pcm_substream_t *substream,
++ int cmd)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ int retval = 0;
++ int flags = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ __raw_writel(SSC_INT_ENDTX, chip->regs + SSC_IER);
++ __raw_writel(PDC_PTCR_TXTEN, chip->regs + PDC_PTCR);
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ __raw_writel(PDC_PTCR_TXTDIS, chip->regs + PDC_PTCR);
++ __raw_writel(SSC_INT_ENDTX, chip->regs + SSC_IDR);
++ break;
++ default:
++ printk(KERN_WARNING "at73c213: spuriouse command %x\n", cmd);
++ retval = -EINVAL;
++ break;
++ }
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return retval;
++}
++
++/* pointer callback */
++static snd_pcm_uframes_t snd_at73c213_pcm_pointer(snd_pcm_substream_t *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ snd_pcm_runtime_t *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = __raw_readl(chip->regs + PDC_TPR) - runtime->dma_addr;
++
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++/* operators */
++static snd_pcm_ops_t at73c213_playback_ops = {
++ .open = snd_at73c213_pcm_open,
++ .close = snd_at73c213_pcm_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_at73c213_pcm_hw_params,
++ .hw_free = snd_at73c213_pcm_hw_free,
++ .prepare = snd_at73c213_pcm_prepare,
++ .trigger = snd_at73c213_pcm_trigger,
++ .pointer = snd_at73c213_pcm_pointer,
++};
++
++/* free a pcm device */
++static void snd_at73c213_pcm_free(snd_pcm_t *pcm)
++{
++ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++ if (chip->pcm != 0 ) {
++#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
++ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++#endif
++ chip->pcm = NULL;
++ }
++}
++
++/* create a new pcm device */
++static int __devinit snd_at73c213_new_pcm(struct snd_at73c213 *chip, int device)
++{
++ snd_pcm_t *pcm;
++ int retval;
++
++ retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm);
++ if (retval < 0)
++ return retval;
++
++ pcm->private_data = chip;
++ pcm->private_free = snd_at73c213_pcm_free;
++ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++ strcpy(pcm->name, "at73c213");
++ chip->pcm = pcm;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
++ snd_pcm_lib_preallocate_pages_for_all(chip->pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev, 64 * 1024, 64 * 1024);
++#endif
++
++ return 0;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++ struct snd_at73c213 *chip = dev_id;
++ struct platform_device *pdev = chip->pdev;
++ snd_pcm_runtime_t *runtime = chip->substream->runtime;
++ u32 status;
++ int offset, next_period, block_size;
++
++ spin_lock(&chip->lock);
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ status = __raw_readl(chip->regs + SSC_IMR);
++
++ if (status & SSC_INT_ENDTX) {
++ chip->period++;
++ if (chip->period == runtime->periods)
++ chip->period = 0;
++ next_period = chip->period + 1;
++ if (next_period == runtime->periods)
++ next_period = 0;
++
++ offset = block_size * next_period;
++
++ /* Make sure that our data are actually readable by the SSC */
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr + offset,
++ block_size, DMA_TO_DEVICE);
++ __raw_writel(runtime->dma_addr + offset, chip->regs + PDC_TNPR);
++ __raw_writel(runtime->period_size * 2, chip->regs + PDC_TNCR);
++
++ if (next_period == 0) {
++ (void)__raw_readl(chip->regs + PDC_TPR);
++ (void)__raw_readl(chip->regs + PDC_TCR);
++ }
++ } else {
++ printk(KERN_WARNING
++ "Spurious SSC interrupt, status = 0x%08lx\n",
++ (unsigned long)status);
++ __raw_writel(status, chip->regs + SSC_IDR);
++ }
++
++ (void)__raw_readl(chip->regs + SSC_IMR);
++ spin_unlock(&chip->lock);
++
++ if (status & SSC_INT_ENDTX)
++ snd_pcm_period_elapsed(chip->substream);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * Mixer functions
++ */
++#if 0 /* Function not in use */
++static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ unsigned long mask = (kcontrol->private_value >> 16) & 0xff;
++
++ uinfo->type = (mask == 1) ?
++ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = mask;
++
++ return 0;
++}
++#endif
++
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ val = (ucontrol->value.integer.value[0] & mask);
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ val = (chip->image[reg] & ~(mask << shift)) | val;
++ change = val != chip->image[reg];
++ write_reg(chip, reg, val);
++
++ chip->image[reg] = val;
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ int mask = (kcontrol->private_value >> 24) & 0xFF;
++
++ uinfo->type = mask == 1 ?
++ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 2;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = mask;
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ ucontrol->value.integer.value[0] =
++ (chip->image[left_reg] >> shift_left) & mask;
++ ucontrol->value.integer.value[1] =
++ (chip->image[right_reg] >> shift_right) & mask;
++
++ if (invert) {
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++ ucontrol->value.integer.value[1] =
++ (mask - ucontrol->value.integer.value[1]);
++ }
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++ int change, retval;
++ unsigned short val1, val2;
++
++ val1 = ucontrol->value.integer.value[0] & mask;
++ val2 = ucontrol->value.integer.value[1] & mask;
++ if (invert) {
++ val1 = mask - val1;
++ val2 = mask - val2;
++ }
++ val1 <<= shift_left;
++ val2 <<= shift_right;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1;
++ val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2;
++ change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg];
++ write_reg(chip, left_reg, val1);
++ write_reg(chip, right_reg, val2);
++
++ chip->image[left_reg] = val1;
++ chip->image[right_reg] = val2;
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = 1;
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (0x01 - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ if (ucontrol->value.integer.value[0])
++ val = mask;
++ else
++ val = 0;
++
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ val |= (chip->image[reg] & ~(mask << shift));
++ change = val != chip->image[reg];
++
++ write_reg(chip, reg, val);
++
++ chip->image[reg] = val;
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1;
++
++ return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 2;
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
++ .info = snd_at73c213_mono_info, \
++ .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \
++ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
++ .info = snd_at73c213_mono_switch_info, \
++ .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \
++ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
++ .info = snd_at73c213_stereo_info, \
++ .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \
++ .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PA Playback Volume",
++ .index = 0,
++ .info = snd_at73c213_pa_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Aux Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_aux_capture_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Line Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_line_capture_volume_info,
++ .get = snd_at73c213_stereo_get,
++ .put = snd_at73c213_stereo_put,
++ .private_value = DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++};
++
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++ struct snd_card *card;
++ int errval, idx;
++
++ if (chip == NULL || chip->pcm == NULL)
++ return -EINVAL;
++
++ card = chip->card;
++
++ strcpy(card->mixername, chip->pcm->name);
++
++ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++ if ((errval = snd_ctl_add(card,
++ snd_ctl_new1(&snd_at73c213_controls[idx],
++ chip))) < 0)
++ return errval;
++ }
++
++ return 0;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++ int retval;
++ unsigned char dac_ctrl = 0;
++
++ /* XXX: Unmask the APB clock for SSC0 */
++ __raw_writel(__raw_readl((void __iomem *)PM_BASE + PM_APBAMASK)|(1<<7),
++ (void __iomem *)PM_BASE + PM_APBAMASK);
++
++ /* Wait for clock to be stable */
++ msleep(10);
++
++ retval = snd_at73c213_set_bitrate_and_div();
++ if (retval)
++ goto out;
++
++ /* Reset the SSC */
++ __raw_writel(SSC_CR_SWRST, chip->regs + SSC_CR);
++
++ /* Enable GCLK0 */
++ __raw_writel((1<<30), (void __iomem *)(PIOA_BASE + PIO_PDR));
++ __raw_writel((1<<30), (void __iomem *)(PIOA_BASE + PIO_ASR));
++ __raw_writel(((gclk_div<<8)|0x10|0x04|0x02), (void __iomem *)(PM_BASE + PM_GCCTRL));
++
++ /* Enable SSC and setup for I2S */
++ __raw_writel(ssc_div, chip->regs + SSC_CMR);
++
++ /* CKO, START, STTDLY, PERIOD */
++ __raw_writel((1<<2)|(4<<8)|(1<<16)|(15<<24), chip->regs + SSC_TCMR);
++
++ /* DATLEN, MSBF, DATNB, FSLEN, FSOS */
++ __raw_writel((15<<0)|(1<<7)|(1<<8)|(15<<16)|(1<<20), chip->regs + SSC_TFMR);
++
++ /* Initialize at73c213 on SPI bus */
++ /* Reset the device */
++ write_reg(chip, DAC_RST, 0x04);
++ msleep(1);
++ write_reg(chip, DAC_RST, 0x03);
++
++ /* Turn on precharge */
++ write_reg(chip, DAC_PRECH, 0xFF);
++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++ write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR));
++
++ msleep(50);
++
++ /* Stop precharging PA */
++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
++ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
++
++ msleep(450);
++
++ /* Stop precharging, turn on master power */
++ write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++ chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR);
++
++ msleep(1);
++
++ /* Turn on DAC */
++ dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)|
++ (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR);
++
++ write_reg(chip, DAC_CTRL, dac_ctrl);
++ chip->image[DAC_CTRL] = dac_ctrl;
++
++ /* Mute sound */
++ write_reg(chip, DAC_LMPG, 0x3F);
++ chip->image[DAC_LMPG] = 0x3F;
++ write_reg(chip, DAC_RMPG, 0x3F);
++ chip->image[DAC_RMPG] = 0x3F;
++ write_reg(chip, DAC_LLOG, 0x3F);
++ chip->image[DAC_LLOG] = 0x3F;
++ write_reg(chip, DAC_RLOG, 0x3F);
++ chip->image[DAC_RLOG] = 0x3F;
++ write_reg(chip, DAC_LLIG, 0x11);
++ chip->image[DAC_LLIG] = 0x11;
++ write_reg(chip, DAC_RLIG, 0x11);
++ chip->image[DAC_RLIG] = 0x11;
++ write_reg(chip, DAC_AUXG, 0x11);
++ chip->image[DAC_AUXG] = 0x11;
++
++ /* Turn on SSC transmitter */
++ __raw_writel(SSC_CR_TXEN, chip->regs + SSC_CR);
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_dev_free(snd_device_t *device)
++{
++ struct snd_at73c213 *chip = device->device_data;
++
++ if (chip->regs) {
++ __raw_writel(SSC_CR_TXDIS, chip->regs + SSC_CR);
++ iounmap(chip->regs);
++ }
++
++ if (chip->irq >= 0)
++ free_irq(chip->irq, chip);
++
++ if (chip->ssc_clk) {
++ clk_disable(chip->ssc_clk);
++ clk_put(chip->ssc_clk);
++ }
++
++ return 0;
++}
++
++static int __devinit snd_at73c213_create(snd_card_t *card,
++ struct platform_device *pdev)
++{
++ static snd_device_ops_t ops = {
++ .dev_free = snd_at73c213_dev_free,
++ };
++ struct snd_at73c213 *chip = get_chip(card);
++ struct resource *regs;
++ struct clk *ssc_clk;
++ int irq, retval;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ ssc_clk = clk_get(&pdev->dev, "mck");
++ if (IS_ERR(ssc_clk))
++ return PTR_ERR(ssc_clk);
++ clk_enable(ssc_clk);
++ chip->ssc_clk = ssc_clk;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
++ chip->irq = -1;
++
++ retval = -ENOMEM;
++
++ retval = spi_setup(chip->spi);
++ if (retval)
++ goto out;
++
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ goto out;
++
++ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++ if (retval) {
++ snd_printk("unable to request IRQ%d\n", irq);
++ goto out;
++ }
++ chip->irq = irq;
++
++ memcpy(&chip->image, &snd_at73c213_original_image,
++ sizeof(snd_at73c213_original_image));
++
++ retval = snd_at73c213_chip_init(chip);
++ if (retval)
++ goto out;
++
++ retval = snd_at73c213_new_pcm(chip, 0);
++ if (retval)
++ goto out;
++
++ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++ if (retval)
++ goto out;
++
++ retval = snd_at73c213_mixer(chip);
++ if (retval)
++ goto out;
++
++ snd_card_set_dev(card, &pdev->dev);
++
++out:
++ return retval;
++}
++
++static int __devinit snd_at73c213_probe(struct platform_device *pdev)
++{
++ static int dev;
++ struct spi_board_info *binfo;
++ struct spi_master *smaster;
++ struct snd_at73c213 *chip;
++ snd_card_t *card;
++ int retval;
++
++ if (dev >= SNDRV_CARDS)
++ return -ENODEV;
++ if (!enable[dev]) {
++ dev++;
++ return -ENOENT;
++ }
++
++ if (spi < 0 || ssc < 0)
++ return -ENODEV;
++
++ retval = -ENOMEM;
++ card = snd_card_new(index[dev], id[dev], THIS_MODULE,
++ sizeof(struct snd_at73c213));
++ if (!card)
++ goto out;
++
++ chip = card->private_data;
++
++ retval = -ENODEV;
++
++ /* Get the SPI bus */
++ binfo = pdev->dev.platform_data;
++ if (!binfo) {
++ printk(KERN_WARNING "at73c213: could not get platform data\n");
++ goto out;
++ }
++
++ smaster = spi_busnum_to_master(spi);
++ if (!smaster) {
++ request_module("spi1");
++ smaster = spi_busnum_to_master(spi);
++ if (!smaster) {
++ printk(KERN_WARNING
++ "at73c213: could not get "
++ "SPI bus %d, remembered to load "
++ "the spi_atmel module?\n", spi);
++ goto out;
++ }
++ }
++
++ chip->spi = spi_new_device(smaster, binfo);
++ if (!chip->spi) {
++ printk(KERN_WARNING "at73c213: could not get SPI device %d\n", spi);
++ goto out;
++ }
++
++ chip->spi->mode = SPI_MODE_1;
++ chip->spi->bits_per_word = 8;
++
++ retval = snd_at73c213_create(card, pdev);
++ if (retval)
++ goto out_free_card;
++
++ strcpy(card->driver, "at73c213");
++ strcpy(card->shortname, "at73c213 (AVR32 STK1000)");
++ sprintf(card->longname, "%s at %p (irq %i)", card->shortname, chip->regs, chip->irq);
++
++ retval = snd_card_register(card);
++ if (retval)
++ goto out_free_card;
++
++ platform_set_drvdata(pdev, card);
++ dev++;
++ return 0;
++
++out_free_card:
++ snd_card_free(card);
++out:
++ return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct platform_device *pdev)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct snd_at73c213 *chip = card->private_data;
++ int retval;
++
++ /* Stop playback */
++ __raw_writel(SSC_CR_TXDIS, chip->regs + SSC_CR);
++
++ /* Stop GLCK0 */
++ __raw_writel(0, (void __iomem *)PM_BASE + PM_GCCTRL);
++
++ /* Mute sound */
++ write_reg(chip, DAC_LMPG, 0x3F);
++ chip->image[DAC_LMPG] = 0x3F;
++ write_reg(chip, DAC_RMPG, 0x3F);
++ chip->image[DAC_RMPG] = 0x3F;
++ write_reg(chip, DAC_LLOG, 0x3F);
++ chip->image[DAC_LLOG] = 0x3F;
++ write_reg(chip, DAC_RLOG, 0x3F);
++ chip->image[DAC_RLOG] = 0x3F;
++ write_reg(chip, DAC_LLIG, 0x11);
++ chip->image[DAC_LLIG] = 0x11;
++ write_reg(chip, DAC_RLIG, 0x11);
++ chip->image[DAC_RLIG] = 0x11;
++ write_reg(chip, DAC_AUXG, 0x11);
++ chip->image[DAC_AUXG] = 0x11;
++
++ /* Turn off PA */
++ write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F));
++ chip->image[PA_CTRL] |= 0x0F;
++ msleep(10);
++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
++ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
++
++ /* Turn off external DAC */
++ write_reg(chip, DAC_CTRL, 0x0C);
++ chip->image[DAC_CTRL] = 0x0C;
++ msleep(2);
++ write_reg(chip, DAC_CTRL, 0x00);
++ chip->image[DAC_CTRL] = 0x00;
++
++ /* Turn off master power */
++ write_reg(chip, DAC_PRECH, 0x00);
++ chip->image[DAC_PRECH] = 0x00;
++
++ msleep(10);
++
++out:
++ if (chip->spi)
++ spi_unregister_device(chip->spi);
++
++ if (card) {
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct platform_device *pdev, pm_message_t state, u32 level)
++{
++ struct snd_card *card = at32_get_drvdata(pdev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ printk(KERN_DEBUG "at73c213: suspending\n");
++
++ /* Stop SSC and GCLK0 */
++
++ spi_suspend(chip->spi, state);
++
++ return 0;
++}
++
++static int snd_at73c213_resume(struct platform_device *pdev, u32 level)
++{
++ struct snd_card *card = at32_get_drvdata(pdev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ printk(KERN_DEBUG "at73c213: resuming\n");
++
++ /* Start GLCK0 and SSC */
++
++ spi_resume(chip->spi);
++
++ return 0;
++}
++#endif /* CONFIG_PM */
++
++/* Driver core initialization */
++static struct platform_driver at73c213_driver = {
++ .probe = snd_at73c213_probe,
++ .remove = __devexit_p(snd_at73c213_remove),
++ .driver = {
++ .name = "at73c213",
++ }
++#ifdef CONFIG_PM
++ .resume = snd_at73c213_resume,
++ .suspend = snd_at73c213_suspend,
++#endif
++};
++
++static int __init at73c213_init(void)
++{
++ return platform_driver_register(&at73c213_driver);
++}
++
++static void __exit at73c213_exit(void)
++{
++ platform_driver_unregister(&at73c213_driver);
++}
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for at73c213 on STK1000");
++MODULE_LICENSE("GPL");
++
++module_init(at73c213_init);
++module_exit(at73c213_exit);
++
+diff -urN linux-2.6.20.4-0rig/sound/avr32/at73c213.h linux-2.6.20.4-atmel/sound/avr32/at73c213.h
+--- linux-2.6.20.4-0rig/sound/avr32/at73c213.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/avr32/at73c213.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,120 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_MIXER_H_
++#define _SND_AT73C213_MIXER_H_
++
++/* DAC control register */
++#define DAC_CTRL 0x00
++#define DAC_CTRL_ONPADRV 7
++#define DAC_CTRL_ONAUXIN 6
++#define DAC_CTRL_ONDACR 5
++#define DAC_CTRL_ONDACL 4
++#define DAC_CTRL_ONLNOR 3
++#define DAC_CTRL_ONLNOL 2
++#define DAC_CTRL_ONLNIR 1
++#define DAC_CTRL_ONLNIL 0
++
++/* DAC left line in gain register */
++#define DAC_LLIG 0x01
++#define DAC_LLIG_LLIG 0
++
++/* DAC right line in gain register */
++#define DAC_RLIG 0x02
++#define DAC_RLIG_RLIG 0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG 0x03
++#define DAC_LMPG_LMPG 0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG 0x04
++#define DAC_RMPG_RMPG 0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG 0x05
++#define DAC_LLOG_LLOG 0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG 0x06
++#define DAC_RLOG_RLOG 0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC 0x07
++#define DAC_OLC_RSHORT 7
++#define DAC_OLC_ROLC 4
++#define DAC_OLC_LSHORT 3
++#define DAC_OLC_LOLC 0
++
++/* DAC Mixer Control Register */
++#define DAC_MC 0x08
++#define DAC_MC_INVR 5
++#define DAC_MC_INVL 4
++#define DAC_MC_RMSMIN2 3
++#define DAC_MC_RMSMIN1 2
++#define DAC_MC_LMSMIN2 1
++#define DAC_MC_LMSMIN1 0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC 0x09
++#define DAC_CSFC_OVRSEL 4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC 0x0A
++#define DAC_MISC_VCMCAPSEL 7
++#define DAC_MISC_DINTSEL 4
++#define DAC_MISC_DITHEN 3
++#define DAC_MISC_DEEMPEN 2
++#define DAC_MISC_NBITS 0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH 0x0C
++#define DAC_PRECH_PRCHGPDRV 7
++#define DAC_PRECH_PRCHGAUX1 6
++#define DAC_PRECH_PRCHGLNOR 5
++#define DAC_PRECH_PRCHGLNOL 4
++#define DAC_PRECH_PRCHGLNIR 3
++#define DAC_PRECH_PRCHGLNIL 2
++#define DAC_PRECH_PRCHG 1
++#define DAC_PRECH_ONMSTR 0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG 0x0D
++#define DAC_AUXG_AUXG 0
++
++/* DAC Reset Register */
++#define DAC_RST 0x10
++#define DAC_RST_RESMASK 2
++#define DAC_RST_RESFILZ 1
++#define DAC_RST_RSTZ 0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL 0x11
++#define PA_CTRL_APAON 6
++#define PA_CTRL_APAPRECH 5
++#define PA_CTRL_APALP 4
++#define PA_CTRL_APAGAIN 0
++
++#endif
++
+diff -urN linux-2.6.20.4-0rig/sound/avr32/Kconfig linux-2.6.20.4-atmel/sound/avr32/Kconfig
+--- linux-2.6.20.4-0rig/sound/avr32/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/avr32/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,51 @@
++# ALSA AVR32 drivers
++
++menu "ALSA AVR32 devices"
++ depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ depends on SND
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
++
++config SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
++ bool "Use the built-in malloc calls in the alsa driver"
++ default n
++ depends on SND_ATMEL_AC97
++ help
++ Say Y if the built-in malloc calls in the alsa driver should be
++ used instead of the native dma_alloc_coherent and dma_free_coherent
++ function calls. Enabling this feature may break the rmmod feature.
++
++config SND_ATMEL_AC97C_USE_PDC
++ bool "Use PDC for DMA transfers to/from the Atmel AC97 Controller"
++ default n
++ depends on SND_ATMEL_AC97
++ help
++ Say Y if PDC (Peripheral DMA Controller) is used for DMA transfers
++ to/from the Atmel AC97C instead of using the generic DMA framework.
++
++config SND_AT73C213
++ tristate "Atmel AT73C213 DAC driver"
++ depends on SND && SPI_ATMEL
++ select SND_PCM
++ help
++ Say Y here if you want to use the Atmel AT73C213 external
++ DAC on the ATSTK1000 development board.
++
++ To compile this driver as a module, choose M here: the
++ module will be called snd-at73c213.
++
++config SND_AT73C213_USE_ALSA_MALLOC_CALLS
++ bool "Use the built-in malloc calls in the alsa driver"
++ default n
++ depends on SND_AT73C213
++ help
++ Say Y if the built-in malloc calls in the alsa driver should be
++ used instead of the native dma_alloc_coherent and dma_free_coherent
++ function calls. Enabling this feature may brake the rmmod feature.
++
++endmenu
+diff -urN linux-2.6.20.4-0rig/sound/avr32/Makefile linux-2.6.20.4-atmel/sound/avr32/Makefile
+--- linux-2.6.20.4-0rig/sound/avr32/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/avr32/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,9 @@
++#
++# Makefile for ALSA
++#
++
++snd-atmel-ac97-objs := ac97c.o
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
++
++snd-at73c213-objs := at73c213.o
++obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
+diff -urN linux-2.6.20.4-0rig/sound/Kconfig linux-2.6.20.4-atmel/sound/Kconfig
+--- linux-2.6.20.4-0rig/sound/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -62,6 +62,8 @@
+
+ source "sound/arm/Kconfig"
+
++source "sound/avr32/Kconfig"
++
+ source "sound/mips/Kconfig"
+
+ # the following will depend on the order of config.
+diff -urN linux-2.6.20.4-0rig/sound/Makefile linux-2.6.20.4-atmel/sound/Makefile
+--- linux-2.6.20.4-0rig/sound/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/
++obj-$(CONFIG_SND) += avr32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+diff -urN linux-2.6.20.4-0rig/sound/oss/at32dac.c linux-2.6.20.4-atmel/sound/oss/at32dac.c
+--- linux-2.6.20.4-0rig/sound/oss/at32dac.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/oss/at32dac.c 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,720 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
++
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
++
++#include "at32dac.h"
++
++#define DMA_BUFFER_SIZE 32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++
++struct sound_settings {
++ unsigned int format;
++ unsigned int channels;
++ unsigned int sample_rate;
++ /* log2(bytes per sample) */
++ unsigned int input_order;
++};
++
++struct at32_dac {
++ spinlock_t lock;
++ void __iomem *regs;
++
++ /* head and tail refer to number of words */
++ struct {
++ u32 *buf;
++ int head;
++ int tail;
++ } dma;
++
++ struct semaphore sem;
++ wait_queue_head_t write_wait;
++
++ /*
++ * Read at most ucount bytes from ubuf, translate to 2-channel
++ * signed 16-bit big endian format and write to the DMA buffer
++ * as long as there is room left. Return the number of bytes
++ * successfully copied from ubuf, or -EFAULT if the first
++ * sample from ubuf couldn't be read. This function is not
++ * called unless there is room for at least one sample (4
++ * bytes) in the DMA buffer.
++ */
++ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount);
++
++ struct sound_settings dsp_settings;
++ struct dma_request_cyclic req;
++
++ struct clk *mck;
++ struct clk *sample_clk;
++ struct platform_device *pdev;
++ int busy;
++ int playing;
++ int dev_dsp;
++};
++static struct at32_dac *the_dac;
++
++static inline unsigned int at32dac_get_head(struct at32_dac *dac)
++{
++ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int at32dac_get_tail(struct at32_dac *dac)
++{
++ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int at32dac_dma_space(struct at32_dac *dac)
++{
++ unsigned int space;
++
++ space = ((dac->dma.tail - dac->dma.head - 1)
++ & ((DMA_BUFFER_SIZE / 4) - 1));
++ return space;
++}
++
++static void at32dac_update_dma_tail(struct at32_dac *dac)
++{
++ dma_addr_t dma_addr;
++ unsigned int new_tail;
++
++ if (dac->playing) {
++ dma_addr = dma_get_current_pos(dac->req.req.dmac,
++ dac->req.req.channel);
++ new_tail = (dma_addr - dac->req.buffer_start) / 4;
++ if (new_tail >= dac->dma.head
++ && (dac->dma.tail < dac->dma.head
++ || dac->dma.tail > new_tail))
++ printk(KERN_NOTICE "at32dac: underrun\n");
++ dac->dma.tail = new_tail;
++ pr_debug("update tail: 0x%x - 0x%x = %u\n",
++ dma_addr, dac->req.buffer_start, dac->dma.tail);
++ }
++}
++
++static int at32dac_start(struct at32_dac *dac)
++{
++ int ret;
++
++ if (dac->playing)
++ return 0;
++
++ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
++
++ clk_enable(dac->sample_clk);
++
++ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++ if (ret)
++ goto out_stop_clock;
++
++ pr_debug("Starting DMA...\n");
++ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++ if (ret)
++ goto out_stop_request;
++
++ dac_writel(dac, CTRL, DAC_BIT(EN));
++ dac->playing = 1;
++
++ return 0;
++
++out_stop_request:
++ dma_stop_request(dac->req.req.dmac,
++ dac->req.req.channel);
++out_stop_clock:
++ clk_disable(dac->sample_clk);
++ return ret;
++}
++
++static int at32dac_stop(struct at32_dac *dac)
++{
++ if (dac->playing) {
++ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++ dac->playing = 0;
++ clk_disable(dac->sample_clk);
++ }
++
++ return 0;
++}
++
++static int at32dac_dma_prepare(struct at32_dac *dac)
++{
++ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ &dac->req.buffer_start, GFP_KERNEL);
++ if (!dac->dma.buf)
++ return -ENOMEM;
++
++ dac->dma.head = dac->dma.tail = 0;
++ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++ dac->req.buffer_size = DMA_BUFFER_SIZE;
++
++ return 0;
++}
++
++static void at32dac_dma_cleanup(struct at32_dac *dac)
++{
++ if (dac->dma.buf)
++ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ dac->dma.buf, dac->req.buffer_start);
++ dac->dma.buf = NULL;
++}
++
++static void at32dac_dma_block_complete(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++ wake_up(&dac->write_wait);
++}
++
++static void at32dac_dma_error(struct dma_request *req)
++{
++ printk(KERN_ERR "at32dac: DMA error\n");
++}
++
++static irqreturn_t at32dac_interrupt(int irq, void *dev_id)
++{
++ struct at32_dac *dac = dev_id;
++ u32 status;
++
++ status = dac_readl(dac, INT_STATUS);
++ if (status & DAC_BIT(UNDERRUN)) {
++ printk(KERN_ERR "at32dac: Underrun detected\n");
++ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++ } else {
++ printk(KERN_ERR "at32dac: Spurious interrupt: status=0x%x\n",
++ status);
++ dac_writel(dac, INT_CLR, status);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!at32dac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[at32dac_get_head(dac)] = sample;
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!at32dac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[at32dac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
++}
++
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!at32dac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ /* Swap bytes in each halfword */
++ dac->dma.buf[at32dac_get_head(dac)] = swahb32(sample);
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!at32dac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ sample = swab16(sample);
++ dac->dma.buf[at32dac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
++}
++
++static ssize_t at32dac_dma_translate_from_user(struct at32_dac *dac,
++ const char __user *buffer,
++ size_t count)
++{
++ /* At least one buffer must be available at this point */
++ pr_debug("at32dac: Copying %zu bytes from user...\n", count);
++
++ return dac->trans(dac, buffer, count);
++}
++
++static int at32dac_set_format(struct at32_dac *dac, int format)
++{
++ unsigned int order;
++
++ switch (format) {
++ case AFMT_S16_BE:
++ order = 1;
++ dac->trans = trans_s16be;
++ break;
++ case AFMT_S16_LE:
++ order = 1;
++ dac->trans = trans_s16le;
++ break;
++ default:
++ printk("at32dac: Unsupported format: %d\n", format);
++ return -EINVAL;
++ }
++
++ if (dac->dsp_settings.channels == 2)
++ order++;
++
++ dac->dsp_settings.input_order = order;
++ dac->dsp_settings.format = format;
++ return 0;
++}
++
++static int at32dac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
++{
++ unsigned long new_rate;
++ int ret;
++
++ ret = clk_set_rate(dac->sample_clk, 256 * rate);
++ if (ret < 0)
++ return ret;
++
++ /* TODO: mplayer seems to have a problem with this */
++#if 0
++ new_rate = clk_get_rate(dac->sample_clk);
++ dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++ dac->dsp_settings.sample_rate = rate;
++#endif
++
++ return 0;
++}
++
++static ssize_t at32dac_dsp_write(struct file *file,
++ const char __user *buffer,
++ size_t count, loff_t *ppos)
++{
++ struct at32_dac *dac = file->private_data;
++ DECLARE_WAITQUEUE(wait, current);
++ unsigned int avail;
++ ssize_t copied;
++ ssize_t ret;
++
++ /* Avoid address space checking in the translation functions */
++ if (!access_ok(buffer, count, VERIFY_READ))
++ return -EFAULT;
++
++ down(&dac->sem);
++
++ if (!dac->dma.buf) {
++ ret = at32dac_dma_prepare(dac);
++ if (ret)
++ goto out;
++ }
++
++ add_wait_queue(&dac->write_wait, &wait);
++ ret = 0;
++ while (count > 0) {
++ do {
++ at32dac_update_dma_tail(dac);
++ avail = at32dac_dma_space(dac);
++ set_current_state(TASK_INTERRUPTIBLE);
++ if (avail >= DMA_WRITE_THRESHOLD)
++ break;
++
++ if (file->f_flags & O_NONBLOCK) {
++ if (!ret)
++ ret = -EAGAIN;
++ goto out;
++ }
++
++ pr_debug("Going to wait (avail = %u, count = %zu)\n",
++ avail, count);
++
++ up(&dac->sem);
++ schedule();
++ if (signal_pending(current)) {
++ if (!ret)
++ ret = -ERESTARTSYS;
++ goto out_nosem;
++ }
++ down(&dac->sem);
++ } while (1);
++
++ copied = at32dac_dma_translate_from_user(dac, buffer, count);
++ if (copied < 0) {
++ if (!ret)
++ ret = -EFAULT;
++ goto out;
++ }
++
++ at32dac_start(dac);
++
++ count -= copied;
++ ret += copied;
++ }
++
++out:
++ up(&dac->sem);
++out_nosem:
++ remove_wait_queue(&dac->write_wait, &wait);
++ set_current_state(TASK_RUNNING);
++ return ret;
++}
++
++static int at32dac_dsp_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ struct at32_dac *dac = file->private_data;
++ int __user *up = (int __user *)arg;
++ struct audio_buf_info abinfo;
++ int val, ret;
++
++ switch (cmd) {
++ case OSS_GETVERSION:
++ return put_user(SOUND_VERSION, up);
++
++ case SNDCTL_DSP_SPEED:
++ if (get_user(val, up))
++ return -EFAULT;
++ if (val >= 0) {
++ at32dac_stop(dac);
++ ret = at32dac_set_sample_rate(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(dac->dsp_settings.sample_rate, up);
++
++ case SNDCTL_DSP_STEREO:
++ if (get_user(val, up))
++ return -EFAULT;
++ at32dac_stop(dac);
++ if (val && dac->dsp_settings.channels == 1)
++ dac->dsp_settings.input_order++;
++ else if (!val && dac->dsp_settings.channels != 1)
++ dac->dsp_settings.input_order--;
++ dac->dsp_settings.channels = val ? 2 : 1;
++ return 0;
++
++ case SNDCTL_DSP_CHANNELS:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val) {
++ if (val < 0 || val > 2)
++ return -EINVAL;
++
++ at32dac_stop(dac);
++ dac->dsp_settings.input_order
++ += val - dac->dsp_settings.channels;
++ dac->dsp_settings.channels = val;
++ }
++ return put_user(val, (int *)arg);
++
++ case SNDCTL_DSP_GETFMTS:
++ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++
++ case SNDCTL_DSP_SETFMT:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val == AFMT_QUERY) {
++ val = dac->dsp_settings.format;
++ } else {
++ ret = at32dac_set_format(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(val, up);
++
++ case SNDCTL_DSP_GETOSPACE:
++ at32dac_update_dma_tail(dac);
++ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++ * (DMA_PERIOD_SIZE / 4));
++ abinfo.bytes = (at32dac_dma_space(dac)
++ << dac->dsp_settings.input_order);
++ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++ >> (DMA_PERIOD_SHIFT
++ + dac->dsp_settings.input_order));
++ abinfo.fragments = ((abinfo.bytes
++ >> dac->dsp_settings.input_order)
++ / (DMA_PERIOD_SIZE / 4));
++ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
++ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++ abinfo.bytes);
++ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++
++ default:
++ printk("at32dac: Unimplemented ioctl cmd: 0x%x\n", cmd);
++ return -EINVAL;
++ }
++}
++
++static int at32dac_dsp_open(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = the_dac;
++ int ret;
++
++ if (file->f_mode & FMODE_READ)
++ return -ENXIO;
++
++ down(&dac->sem);
++ ret = -EBUSY;
++ if (dac->busy)
++ goto out;
++
++ dac->dma.head = dac->dma.tail = 0;
++
++ /* FIXME: What are the correct defaults? */
++ dac->dsp_settings.channels = 2;
++ at32dac_set_format(dac, AFMT_S16_BE);
++ ret = at32dac_set_sample_rate(dac, 8000);
++ if (ret)
++ goto out;
++
++ file->private_data = dac;
++ dac->busy = 1;
++
++ ret = 0;
++
++out:
++ up(&dac->sem);
++ return ret;
++}
++
++static int at32dac_dsp_release(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = file->private_data;
++
++ down(&dac->sem);
++
++ at32dac_stop(dac);
++ at32dac_dma_cleanup(dac);
++ dac->busy = 0;
++
++ up(&dac->sem);
++
++ return 0;
++}
++
++static struct file_operations at32dac_dsp_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = at32dac_dsp_write,
++ .ioctl = at32dac_dsp_ioctl,
++ .open = at32dac_dsp_open,
++ .release = at32dac_dsp_release,
++};
++
++static int __devinit at32dac_probe(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++ struct resource *regs;
++ struct clk *mck;
++ struct clk *sample_clk;
++ int irq;
++ int ret;
++
++ if (the_dac)
++ return -EBUSY;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ mck = clk_get(&pdev->dev, "mck");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ sample_clk = clk_get(&pdev->dev, "sample_clk");
++ if (IS_ERR(sample_clk)) {
++ ret = PTR_ERR(sample_clk);
++ goto out_put_mck;
++ }
++ clk_enable(mck);
++
++ ret = -ENOMEM;
++ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++ if (!dac)
++ goto out_disable_clk;
++
++ spin_lock_init(&dac->lock);
++ init_MUTEX(&dac->sem);
++ init_waitqueue_head(&dac->write_wait);
++ dac->pdev = pdev;
++ dac->mck = mck;
++ dac->sample_clk = sample_clk;
++
++ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dac->regs)
++ goto out_free_dac;
++
++ ret = request_irq(irq, at32dac_interrupt, 0, "dac", dac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* FIXME */
++ dac->req.req.dmac = find_dma_controller(0);
++ if (!dac->req.req.dmac)
++ goto out_free_irq;
++
++ ret = dma_alloc_channel(dac->req.req.dmac);
++ if (ret < 0)
++ goto out_free_irq;
++
++ dac->req.req.channel = ret;
++ dac->req.req.block_complete = at32dac_dma_block_complete;
++ dac->req.req.error = at32dac_dma_error;
++ dac->req.data_reg = regs->start + DAC_DATA;
++ dac->req.periph_id = 2; /* FIXME */
++ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++ dac->req.width = DMA_WIDTH_32BIT;
++
++ /* Make sure the DAC is silent and disabled */
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++
++ ret = register_sound_dsp(&at32dac_dsp_fops, -1);
++ if (ret < 0)
++ goto out_free_dma;
++ dac->dev_dsp = ret;
++
++ /* TODO: Register mixer */
++
++ the_dac = dac;
++ platform_set_drvdata(pdev, dac);
++
++ return 0;
++
++out_free_dma:
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++ free_irq(irq, dac);
++out_unmap_regs:
++ iounmap(dac->regs);
++out_free_dac:
++ kfree(dac);
++out_disable_clk:
++ clk_disable(mck);
++ clk_put(sample_clk);
++out_put_mck:
++ clk_put(mck);
++ return ret;
++}
++
++static int __devexit at32dac_remove(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++
++ dac = platform_get_drvdata(pdev);
++ if (dac) {
++ unregister_sound_dsp(dac->dev_dsp);
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++ free_irq(platform_get_irq(pdev, 0), dac);
++ iounmap(dac->regs);
++ clk_disable(dac->mck);
++ clk_put(dac->sample_clk);
++ clk_put(dac->mck);
++ kfree(dac);
++ platform_set_drvdata(pdev, NULL);
++ the_dac = NULL;
++ }
++
++ return 0;
++}
++
++static struct platform_driver at32dac_driver = {
++ .probe = at32dac_probe,
++ .remove = __devexit_p(at32dac_remove),
++ .driver = {
++ .name = "dac",
++ },
++};
++
++static int __init at32dac_init(void)
++{
++ return platform_driver_register(&at32dac_driver);
++}
++module_init(at32dac_init);
++
++static void __exit at32dac_exit(void)
++{
++ platform_driver_unregister(&at32dac_driver);
++}
++module_exit(at32dac_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("DMA Sound Driver for the Atmel AT32 on-chip DAC");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.20.4-0rig/sound/oss/at32dac.h linux-2.6.20.4-atmel/sound/oss/at32dac.h
+--- linux-2.6.20.4-0rig/sound/oss/at32dac.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/oss/at32dac.h 2007-03-24 16:42:29.000000000 +0100
+@@ -0,0 +1,65 @@
++/*
++ * Register definitions for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DAC_H__
++#define __ASM_AVR32_DAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA 0x0000
++#define DAC_CTRL 0x0008
++#define DAC_INT_MASK 0x000c
++#define DAC_INT_EN 0x0010
++#define DAC_INT_DIS 0x0014
++#define DAC_INT_CLR 0x0018
++#define DAC_INT_STATUS 0x001c
++#define DAC_PDC_DATA 0x0020
++
++/* Bitfields in DATA */
++#define DAC_DATA_OFFSET 0
++#define DAC_DATA_SIZE 32
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET 30
++#define DAC_SWAP_SIZE 1
++#define DAC_EN_OFFSET 31
++#define DAC_EN_SIZE 1
++
++/* Bitfields in INT_MASK */
++
++/* Bitfields in INT_EN */
++
++/* Bitfields in INT_DIS */
++#define DAC_TX_READY_OFFSET 29
++#define DAC_TX_READY_SIZE 1
++#define DAC_TX_BUFFER_EMPTY_OFFSET 30
++#define DAC_TX_BUFFER_EMPTY_SIZE 1
++#define DAC_CHANNEL_TX_END_OFFSET 31
++#define DAC_CHANNEL_TX_END_SIZE 1
++
++/* Bitfields in INT_CLR */
++#define DAC_UNDERRUN_OFFSET 28
++#define DAC_UNDERRUN_SIZE 1
++
++/* Bitfields in INT_STATUS */
++
++/* Bitfields in PDC_DATA */
++
++/* Bit manipulation macros */
++#define DAC_BIT(name) (1 << DAC_##name##_OFFSET)
++#define DAC_BF(name,value) (((value) & ((1 << DAC_##name##_SIZE) - 1)) << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name,value) (((value) >> DAC_##name##_OFFSET) & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name,value,old) (((old) & ~(((1 << DAC_##name##_SIZE) - 1) << DAC_##name##_OFFSET)) | DAC_BF(name,value))
++
++/* Register access macros */
++#define dac_readl(port,reg) \
++ __raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + DAC_##reg)
++
++#endif /* __ASM_AVR32_DAC_H__ */
+diff -urN linux-2.6.20.4-0rig/sound/oss/Kconfig linux-2.6.20.4-atmel/sound/oss/Kconfig
+--- linux-2.6.20.4-0rig/sound/oss/Kconfig 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/oss/Kconfig 2007-03-24 16:42:29.000000000 +0100
+@@ -750,3 +750,7 @@
+ int "DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO
++
++config SOUND_AT32_DAC
++ tristate "Atmel AT32 On-chip DAC support"
++ depends on SOUND_PRIME && AVR32
+diff -urN linux-2.6.20.4-0rig/sound/oss/Makefile linux-2.6.20.4-atmel/sound/oss/Makefile
+--- linux-2.6.20.4-0rig/sound/oss/Makefile 2007-03-23 20:52:51.000000000 +0100
++++ linux-2.6.20.4-atmel/sound/oss/Makefile 2007-03-24 16:42:29.000000000 +0100
+@@ -10,6 +10,7 @@
+
+ # Please leave it as is, cause the link order is significant !
+
++obj-$(CONFIG_SOUND_AT32_DAC) += at32dac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2) += hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o