diff options
Diffstat (limited to 'target/device/ARMLTD/integrator926_huge_defconfig')
| -rw-r--r-- | target/device/ARMLTD/integrator926_huge_defconfig | 543 |
1 files changed, 543 insertions, 0 deletions
diff --git a/target/device/ARMLTD/integrator926_huge_defconfig b/target/device/ARMLTD/integrator926_huge_defconfig new file mode 100644 index 000000000..d7cb4872c --- /dev/null +++ b/target/device/ARMLTD/integrator926_huge_defconfig @@ -0,0 +1,543 @@ +# +# Automatically generated make config: don't edit +# Fri Sep 28 20:43:18 2007 +# +BR2_HAVE_DOT_CONFIG=y +BR2_VERSION="0.10.0-svn" +# BR2_alpha is not set +BR2_arm=y +# BR2_armeb is not set +# BR2_avr32 is not set +# BR2_cris is not set +# BR2_ia64 is not set +# BR2_i386 is not set +# BR2_m68k is not set +# BR2_mips is not set +# BR2_mipsel is not set +# BR2_nios2 is not set +# BR2_powerpc is not set +# BR2_s390 is not set +# BR2_sh is not set +# BR2_sh64 is not set +# BR2_sparc is not set +# BR2_sparc64 is not set +# BR2_x86_64 is not set +# BR2_generic_arm is not set +# BR2_arm7tdmi is not set +# BR2_arm610 is not set +# BR2_arm710 is not set +# BR2_arm720t is not set +# BR2_arm920t is not set +# BR2_arm922t is not set +BR2_arm926t=y +# BR2_arm10t is not set +# BR2_arm1136jf_s is not set +# BR2_arm1176jz_s is not set +# BR2_arm1176jzf_s is not set +# BR2_sa110 is not set +# BR2_sa1100 is not set +# BR2_xscale is not set +# BR2_iwmmxt is not set +BR2_ARM_TYPE="ARM926T" +# BR2_ARM_OABI is not set +BR2_ARM_EABI=y +BR2_ARCH="arm" +BR2_ENDIAN="LITTLE" +BR2_GCC_TARGET_TUNE="arm9tdmi" + +# +# Target options +# + +# +# Project Options +# +BR2_PROJECT="uclibc" +BR2_HOSTNAME="uclibc" +BR2_BANNER="Welcome to the Erik's uClibc development environment." + +# +# Preset Devices +# +BR2_PACKAGE_LINUX=y +BR2_TARGET_ARMLTD=y + +# +# Arm based Device Support +# +BR2_TARGET_ARMLTD_INTEGRATOR_926=y +# BR2_TARGET_ATMEL is not set +# BR2_TARGET_SHARP is not set + +# +# Generic System Support +# +# BR2_TARGET_GENERIC_ACCESS_POINT is not set +# BR2_TARGET_GENERIC_FIREWALL is not set +# BR2_TARGET_GENERIC_DEV_SYSTEM is not set + +# +# Build options +# +BR2_WGET="wget --passive-ftp -nd" +BR2_SVN_CO="svn co" +BR2_SVN_UP="svn up" +BR2_GIT="git clone" +BR2_ZCAT="gzip -d -c" +BR2_BZCAT="bzcat" +BR2_TAR_OPTIONS="" +BR2_DL_DIR="$(BASE_DIR)/dl" + +# +# Mirrors and Download locations +# +BR2_SOURCEFORGE_MIRROR="switch" + +# +# Atmel Mirrors +# +BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot" +BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/" +BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir" +BR2_TOPDIR_PREFIX="" +BR2_TOPDIR_SUFFIX="" +BR2_GNU_BUILD_SUFFIX="pc-linux-gnu" +BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi" +BR2_JLEVEL=1 +# BR2_PREFER_IMA is not set +# BR2_DEPRECATED is not set +BR2_STRIP_strip=y +# BR2_STRIP_sstrip is not set +# BR2_STRIP_none is not set +# BR2_PREFER_STATIC_LIB is not set +# BR2_HAVE_MANPAGES is not set +# BR2_HAVE_INFOPAGES is not set +BR2_UPDATE_CONFIG=y + +# +# Toolchain +# +BR2_TOOLCHAIN_BUILDROOT=y +# BR2_TOOLCHAIN_EXTERNAL is not set +# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set +BR2_TOOLCHAIN_SOURCE=y + +# +# Kernel Header Options +# +# BR2_KERNEL_HEADERS_2_4_25 is not set +# BR2_KERNEL_HEADERS_2_4_27 is not set +# BR2_KERNEL_HEADERS_2_4_29 is not set +# BR2_KERNEL_HEADERS_2_4_31 is not set +# BR2_KERNEL_HEADERS_2_6_9 is not set +# BR2_KERNEL_HEADERS_2_6_11 is not set +# BR2_KERNEL_HEADERS_2_6_12 is not set +# BR2_KERNEL_HEADERS_2_6_20_4 is not set +# BR2_KERNEL_HEADERS_2_6_20 is not set +# BR2_KERNEL_HEADERS_2_6_21_5 is not set +# BR2_KERNEL_HEADERS_2_6_21 is not set +# BR2_KERNEL_HEADERS_2_6_22_1 is not set +BR2_KERNEL_HEADERS_2_6_22=y +# BR2_KERNEL_HEADERS_SNAP is not set +BR2_DEFAULT_KERNEL_HEADERS="2.6.22.9" + +# +# uClibc Options +# +# BR2_UCLIBC_VERSION_0_9_28_3 is not set +BR2_UCLIBC_VERSION_0_9_29=y +# BR2_UCLIBC_VERSION_SNAPSHOT is not set +BR2_UCLIBC_CONFIG="target/device/Arm/uClibc.integrator926.config" +# BR2_ENABLE_LOCALE is not set +# BR2_PTHREADS_NONE is not set +# BR2_PTHREADS is not set +BR2_PTHREADS_OLD=y +# BR2_PTHREADS_NATIVE is not set +# BR2_PTHREAD_DEBUG is not set +# BR2_UCLIBC_PROGRAM_INVOCATION is not set + +# +# Binutils Options +# +# BR2_BINUTILS_VERSION_2_17 is not set +# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set +# BR2_BINUTILS_VERSION_2_18 is not set +BR2_BINUTILS_VERSION_2_18_50_0_1=y +BR2_BINUTILS_VERSION="2.18.50.0.1" +BR2_EXTRA_BINUTILS_CONFIG_OPTIONS="" + +# +# GCC Options +# +# BR2_GCC_VERSION_3_4_6 is not set +# BR2_GCC_VERSION_4_0_4 is not set +# BR2_GCC_VERSION_4_1_2 is not set +# BR2_GCC_VERSION_4_2_0 is not set +BR2_GCC_VERSION_4_2_1=y +# BR2_GCC_IS_SNAP is not set +BR2_GCC_SUPPORTS_SYSROOT=y +# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set +BR2_GCC_VERSION="4.2.1" +BR2_TOOLCHAIN_SYSROOT=y +# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set +BR2_EXTRA_GCC_CONFIG_OPTIONS="" +BR2_GCC_CROSS_CXX=y +# BR2_GCC_CROSS_FORTRAN is not set +BR2_INSTALL_LIBSTDCPP=y +# BR2_INSTALL_LIBGCJ is not set +# BR2_INSTALL_OBJC is not set +# BR2_INSTALL_FORTRAN is not set +BR2_GCC_SHARED_LIBGCC=y + +# +# Ccache Options +# +# BR2_CCACHE is not set + +# +# Gdb Options +# +# BR2_PACKAGE_GDB is not set +# BR2_PACKAGE_GDB_SERVER is not set +# BR2_PACKAGE_GDB_HOST is not set + +# +# elf2flt +# +# BR2_ELF2FLT is not set +# BR2_MKLIBS is not set + +# +# Common Toolchain Options +# +# BR2_PACKAGE_SSTRIP_TARGET is not set +# BR2_PACKAGE_SSTRIP_HOST is not set +# BR2_ENABLE_MULTILIB is not set +# BR2_LARGEFILE is not set +# BR2_INET_IPV6 is not set +# BR2_INET_RPC is not set +# BR2_USE_WCHAR is not set +BR2_SOFT_FLOAT=y +BR2_TARGET_OPTIMIZATION="-Os -pipe -fwrapv" +BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y + +# +# Package Selection for the target +# +BR2_PACKAGE_BUSYBOX=y +# BR2_BUSYBOX_VERSION_1_2_2_1 is not set +# BR2_BUSYBOX_VERSION_1_6_1 is not set +# BR2_BUSYBOX_VERSION_1_7_0 is not set +BR2_BUSYBOX_VERSION_1_7_1=y +# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set +BR2_BUSYBOX_VERSION="1.7.1" +BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y +BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config" +BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y +BR2_PACKAGE_BUSYBOX_SKELETON=y + +# +# The minimum needed to build a uClibc development system +# +BR2_PACKAGE_BASH=y +# BR2_PACKAGE_BZIP2 is not set +# BR2_PACKAGE_DIFFUTILS is not set +BR2_PACKAGE_FLEX=y +BR2_PACKAGE_FLEX_LIBFL=y +BR2_PACKAGE_GCC_TARGET=y +BR2_EXTRA_TARGET_GCC_CONFIG_OPTIONS="" +BR2_PACKAGE_MAKE=y + +# +# Other development stuff +# +# BR2_PACKAGE_AUTOCONF is not set +# BR2_PACKAGE_AUTOMAKE is not set +BR2_PACKAGE_BISON=y +# BR2_PACKAGE_CCACHE_TARGET is not set +# BR2_PACKAGE_DISTCC is not set +# BR2_PACKAGE_DMALLOC is not set +BR2_PACKAGE_EXPAT=y +# BR2_PACKAGE_FAKEROOT is not set +BR2_HOST_FAKEROOT=y +BR2_PACKAGE_GETTEXT=y +# BR2_PACKAGE_GETTEXT_STATIC is not set +BR2_PACKAGE_LIBINTL=y +BR2_PACKAGE_LIBGMP=y +BR2_PACKAGE_LIBGMP_HEADERS=y +BR2_PACKAGE_LIBMPFR=y +BR2_PACKAGE_LIBMPFR_HEADERS=y +BR2_PACKAGE_LIBTOOL=y +BR2_PACKAGE_M4=y +# BR2_PACKAGE_MPATROL is not set +# BR2_PACKAGE_PKGCONFIG is not set +BR2_READLINE=y +BR2_PACKAGE_READLINE_TARGET=y +# BR2_PACKAGE_XERCES is not set + +# +# Other stuff +# +# BR2_PACKAGE_AT is not set +# BR2_PACKAGE_BERKELEYDB is not set +# BR2_PACKAGE_BSDIFF is not set +# BR2_PACKAGE_CUSTOMIZE is not set +# BR2_PACKAGE_DASH is not set +# BR2_PACKAGE_FILE is not set +# BR2_PACKAGE_KEXEC is not set +# BR2_PACKAGE_LIBDAEMON is not set +# BR2_PACKAGE_LIBELF is not set +# BR2_PACKAGE_LIBEVENT is not set +# BR2_PACKAGE_LIBFLOAT is not set +# BR2_PACKAGE_LIBGCRYPT is not set +# BR2_PACKAGE_LIBGPG_ERROR is not set +# BR2_PACKAGE_LIBLOCKFILE is not set +# BR2_PACKAGE_LIBSYSFS is not set +# BR2_PACKAGE_LIBXML2 is not set +# BR2_PACKAGE_LOCKFILE_PROGS is not set +# BR2_PACKAGE_LSOF is not set +# BR2_PACKAGE_LTP-TESTSUITE is not set +# BR2_PACKAGE_LTT is not set +# BR2_PACKAGE_PORTAGE is not set +# BR2_PACKAGE_SQLITE is not set +# BR2_PACKAGE_STRACE is not set +# BR2_PACKAGE_SUDO is not set +BR2_NETWORK_SUPPORT=y + +# +# Networking applications +# +# BR2_PACKAGE_ARGUS is not set +# BR2_PACKAGE_AVAHI is not set +# BR2_PACKAGE_BOA is not set +# BR2_PACKAGE_BIND is not set +# BR2_PACKAGE_BRIDGE is not set +# BR2_PACKAGE_CURL is not set +# BR2_PACKAGE_LIBCURL is not set +# BR2_PACKAGE_DNSMASQ is not set +# BR2_PACKAGE_DROPBEAR is not set +# BR2_PACKAGE_ETHTOOL is not set +# BR2_PACKAGE_HASERL is not set +# BR2_PACKAGE_IRDA_UTILS is not set +# BR2_PACKAGE_IPERF is not set +# BR2_PACKAGE_IPROUTE2 is not set +# BR2_PACKAGE_IPSEC_TOOLS is not set +# BR2_PACKAGE_IPTABLES is not set +# BR2_PACKAGE_L2TP is not set +# BR2_PACKAGE_LIBCGI is not set +# BR2_PACKAGE_LIBCGICC is not set +BR2_PACKAGE_LIBPCAP=y +# BR2_PACKAGE_LINKS is not set +# BR2_PACKAGE_LRZSZ is not set +# BR2_PACKAGE_MDNSRESPONDER is not set +# BR2_PACKAGE_MROUTED is not set +# BR2_PACKAGE_MUTT is not set +# BR2_PACKAGE_NBD is not set +# BR2_PACKAGE_NCFTP is not set +# BR2_PACKAGE_NETKITBASE is not set +# BR2_PACKAGE_NETKITTELNET is not set +# BR2_PACKAGE_NETPLUG is not set +# BR2_PACKAGE_NETSNMP is not set +# BR2_PACKAGE_NFS_UTILS is not set +# BR2_PACKAGE_NTP is not set +# BR2_PACKAGE_OLSR is not set +# BR2_PACKAGE_OPENNTPD is not set +BR2_PACKAGE_OPENSSH=y +BR2_PACKAGE_OPENSSL=y +# BR2_PACKAGE_OPENSSL_TARGET_HEADERS is not set +# BR2_PACKAGE_OPENVPN is not set +# BR2_PACKAGE_OPENSWAN is not set +# BR2_PACKAGE_PORTMAP is not set +# BR2_PACKAGE_PPPD is not set +# BR2_PACKAGE_RP_PPPOE is not set +# BR2_PACKAGE_PPTP_LINUX is not set +# BR2_PACKAGE_PROFTPD is not set +# BR2_PACKAGE_QUAGGA is not set + +# +# quagga suite +# +# BR2_PACKAGE_QUAGGA_ZEBRA is not set +# BR2_PACKAGE_QUAGGA_BGPD is not set +# BR2_PACKAGE_QUAGGA_RIPD is not set +# BR2_PACKAGE_QUAGGA_RIPNGD is not set +# BR2_PACKAGE_QUAGGA_OSPFD is not set +# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set +# BR2_PACKAGE_QUAGGA_ISISD is not set +# BR2_PACKAGE_RSYNC is not set +# BR2_PACKAGE_SAMBA is not set +# BR2_PACKAGE_SOCAT is not set +# BR2_PACKAGE_STUNNEL is not set +BR2_PACKAGE_TCPDUMP=y +# BR2_PACKAGE_TCPDUMP_SMB is not set +# BR2_PACKAGE_DHCPDUMP is not set +# BR2_PACKAGE_TFTPD is not set +# BR2_PACKAGE_TN5250 is not set +# BR2_PACKAGE_TTCP is not set +# BR2_PACKAGE_VPNC is not set +# BR2_PACKAGE_VTUN is not set +# BR2_PACKAGE_WIRELESS_TOOLS is not set +BR2_BLOCKDEV_SUPPORT=y +# BR2_PACKAGE_DBUS is not set +# BR2_PACKAGE_DM is not set +# BR2_PACKAGE_DMRAID is not set +# BR2_PACKAGE_E2FSPROGS is not set +# BR2_PACKAGE_GADGETFS_TEST is not set +# BR2_PACKAGE_HAL is not set +# BR2_PACKAGE_HWDATA is not set +# BR2_PACKAGE_IOSTAT is not set +# BR2_PACKAGE_LIBAIO is not set +# BR2_PACKAGE_LIBRAW1394 is not set +# BR2_PACKAGE_LIBUSB is not set +# BR2_PACKAGE_LM_SENSORS is not set +# BR2_PACKAGE_LVM2 is not set +# BR2_PACKAGE_MDADM is not set +# BR2_PACKAGE_MEMTESTER is not set +# BR2_PACKAGE_MKDOSFS is not set +# BR2_PACKAGE_MTD is not set +BR2_PACKAGE_PCIUTILS=y +# BR2_PACKAGE_PCMCIA is not set +# BR2_PACKAGE_RAIDTOOLS is not set +# BR2_PACKAGE_SETSERIAL is not set +# BR2_PACKAGE_SMARTMONTOOLS is not set +# BR2_PACKAGE_USBMOUNT is not set +# BR2_PACKAGE_USBUTILS is not set +# BR2_PACKAGE_WIPE is not set +# BR2_PACKAGE_XFSPROGS is not set +BR2_AUDIO_SUPPORT=y +# BR2_PACKAGE_ALSA_LIB is not set +# BR2_PACKAGE_ASTERISK is not set +# BR2_PACKAGE_AUMIX is not set +# BR2_PACKAGE_LIBMAD is not set +# BR2_PACKAGE_LIBSNDFILE is not set +# BR2_PACKAGE_LIBVORBIS is not set +# BR2_PACKAGE_MADPLAY is not set +# BR2_PACKAGE_MPG123 is not set +BR2_GRAPHIC_SUPPORT=y + +# +# text rendering libraries +# +BR2_PACKAGE_NCURSES=y +# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set +# BR2_PACKAGE_NEWT is not set +# BR2_PACKAGE_SLANG is not set + +# +# text rendering applications +# +# BR2_PACKAGE_DIALOG is not set + +# +# graphic libraries +# +# BR2_PACKAGE_DIRECTFB is not set +# BR2_PACKAGE_IMAGEMAGICK is not set +# BR2_PACKAGE_JPEG is not set +# BR2_PACKAGE_LIBPNG is not set +# BR2_PACKAGE_LIBUNGIF is not set +# BR2_PACKAGE_SDL is not set +# BR2_PACKAGE_TIFF is not set + +# +# busybox graphic applications +# + +# +# --> (May be broken in busybox) +# +# BR2_PACKAGE_FBV is not set +# BR2_PACKAGE_FBSET is not set + +# +# other GUIs +# +# BR2_PACKAGE_QTE is not set +# BR2_PACKAGE_QTOPIA4 is not set +BR2_PACKAGE_XSERVER_none=y +# BR2_PACKAGE_XSERVER_x11r7 is not set +# BR2_PACKAGE_XSERVER_xorg is not set +# BR2_PACKAGE_XSERVER_tinyx is not set +BR2_X11_PREFIX="/usr" + +# +# X libraries and helper libraries +# +# BR2_PACKAGE_ATK is not set +# BR2_PACKAGE_PANGO is not set +# BR2_PACKAGE_LIBDRM is not set +# BR2_PACKAGE_LIBGLIB12 is not set +# BR2_PACKAGE_LIBGLIB2 is not set +# BR2_PACKAGE_FONTCONFIG is not set +# BR2_PACKAGE_FREETYPE is not set +# BR2_PACKAGE_TSLIB is not set + +# +# X Window managers +# +# BR2_PACKAGE_MATCHBOX is not set + +# +# X applications +# + +# +# Video libraries/codecs and applications +# +# BR2_PACKAGE_MPLAYER is not set +BR2_COMPRESSOR_SUPPORT=y +# BR2_PACKAGE_LZO is not set +BR2_PACKAGE_LZMA_TARGET=y +# BR2_PACKAGE_LZMA_TARGET_HEADERS is not set +# BR2_PACKAGE_LZMA_HOST is not set +BR2_PACKAGE_ZLIB=y +# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set +BR2_SCRIPTING_SUPPORT=y +# BR2_PACKAGE_MICROPERL is not set +# BR2_PACKAGE_PYTHON is not set +# BR2_PACKAGE_RUBY is not set +# BR2_PACKAGE_TCL is not set +# BR2_PACKAGE_PHP is not set + +# +# Target filesystem options +# + +# +# filesystem for target device +# +# BR2_TARGET_ROOTFS_CRAMFS is not set +# BR2_TARGET_ROOTFS_CLOOP is not set +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 +BR2_TARGET_ROOTFS_EXT2_INODES=0 +BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 +BR2_TARGET_ROOTFS_EXT2_SQUASH=y +BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2" +BR2_TARGET_ROOTFS_EXT2_NONE=y +# BR2_TARGET_ROOTFS_EXT2_GZIP is not set +# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set +# BR2_TARGET_ROOTFS_EXT2_LZMA is not set +BR2_TARGET_ROOTFS_EXT2_COPYTO="" +# BR2_TARGET_ROOTFS_JFFS2 is not set +# BR2_TARGET_ROOTFS_SQUASHFS is not set +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_NONE=y +# BR2_TARGET_ROOTFS_CPIO_GZIP is not set +# BR2_TARGET_ROOTFS_CPIO_BZIP2 is not set +# BR2_TARGET_ROOTFS_CPIO_LZMA is not set +# BR2_TARGET_ROOTFS_INITRAMFS is not set + +# +# bootloader for target device +# + +# +# Kernel +# +# BR2_KERNEL_none is not set +BR2_KERNEL_LINUX=y +# BR2_KERNEL_HURD is not set +BR2_PACKAGE_LINUX_KCONFIG="target/device/Arm/linux26.integrator926_huge.config" +BR2_PACKAGE_LINUX_FORMAT="vmlinux" |