diff options
Diffstat (limited to 'support/scripts')
| -rwxr-xr-x | support/scripts/mkusers | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/support/scripts/mkusers b/support/scripts/mkusers new file mode 100755 index 000000000..19aa085e1 --- /dev/null +++ b/support/scripts/mkusers @@ -0,0 +1,409 @@ +#!/bin/bash +set -e +myname="${0##*/}" + +#---------------------------------------------------------------------------- +# Configurable items +MIN_UID=1000 +MAX_UID=1999 +MIN_GID=1000 +MAX_GID=1999 +# No more is configurable below this point +#---------------------------------------------------------------------------- + +#---------------------------------------------------------------------------- +error() { + local fmt="${1}" + shift + + printf "%s: " "${myname}" >&2 + printf "${fmt}" "${@}" >&2 +} +fail() { + error "$@" + exit 1 +} + +#---------------------------------------------------------------------------- +if [ ${#} -ne 2 ]; then + fail "usage: %s USERS_TABLE TARGET_DIR\n" +fi +USERS_TABLE="${1}" +TARGET_DIR="${2}" +shift 2 +PASSWD="${TARGET_DIR}/etc/passwd" +SHADOW="${TARGET_DIR}/etc/shadow" +GROUP="${TARGET_DIR}/etc/group" +# /etc/gshadow is not part of the standard skeleton, so not everybody +# will have it, but some may hav it, and its content must be in sync +# with /etc/group, so any use of gshadow must be conditional. +GSHADOW="${TARGET_DIR}/etc/gshadow" + +# We can't simply source ${BUILDROOT_CONFIG} as it may contains constructs +# such as: +# BR2_DEFCONFIG="$(CONFIG_DIR)/defconfig" +# which when sourced from a shell script will eventually try to execute +# a command name 'CONFIG_DIR', which is plain wrong for virtually every +# systems out there. +# So, we have to scan that file instead. Sigh... :-( +PASSWD_METHOD="$( sed -r -e '/^BR2_TARGET_GENERIC_PASSWD_METHOD="(.*)"$/!d;' \ + -e 's//\1/;' \ + "${BUILDROOT_CONFIG}" \ + )" + +#---------------------------------------------------------------------------- +get_uid() { + local username="${1}" + + awk -F: -v username="${username}" \ + '$1 == username { printf( "%d\n", $3 ); }' "${PASSWD}" +} + +#---------------------------------------------------------------------------- +get_ugid() { + local username="${1}" + + awk -F:i -v username="${username}" \ + '$1 == username { printf( "%d\n", $4 ); }' "${PASSWD}" +} + +#---------------------------------------------------------------------------- +get_gid() { + local group="${1}" + + awk -F: -v group="${group}" \ + '$1 == group { printf( "%d\n", $3 ); }' "${GROUP}" +} + +#---------------------------------------------------------------------------- +get_username() { + local uid="${1}" + + awk -F: -v uid="${uid}" \ + '$3 == uid { printf( "%s\n", $1 ); }' "${PASSWD}" +} + +#---------------------------------------------------------------------------- +get_group() { + local gid="${1}" + + awk -F: -v gid="${gid}" \ + '$3 == gid { printf( "%s\n", $1 ); }' "${GROUP}" +} + +#---------------------------------------------------------------------------- +get_ugroup() { + local username="${1}" + local ugid + + ugid="$( get_ugid "${username}" )" + if [ -n "${ugid}" ]; then + get_group "${ugid}" + fi +} + +#---------------------------------------------------------------------------- +# Sanity-check the new user/group: +# - check the gid is not already used for another group +# - check the group does not already exist with another gid +# - check the user does not already exist with another gid +# - check the uid is not already used for another user +# - check the user does not already exist with another uid +# - check the user does not already exist in another group +check_user_validity() { + local username="${1}" + local uid="${2}" + local group="${3}" + local gid="${4}" + local _uid _ugid _gid _username _group _ugroup + + _group="$( get_group "${gid}" )" + _gid="$( get_gid "${group}" )" + _ugid="$( get_ugid "${username}" )" + _username="$( get_username "${uid}" )" + _uid="$( get_uid "${username}" )" + _ugroup="$( get_ugroup "${username}" )" + + if [ "${username}" = "root" ]; then + fail "invalid username '%s\n'" "${username}" + fi + + if [ ${gid} -lt -1 -o ${gid} -eq 0 ]; then + fail "invalid gid '%d'\n" ${gid} + elif [ ${gid} -ne -1 ]; then + # check the gid is not already used for another group + if [ -n "${_group}" -a "${_group}" != "${group}" ]; then + fail "gid is already used by group '${_group}'\n" + fi + + # check the group does not already exists with another gid + if [ -n "${_gid}" -a ${_gid} -ne ${gid} ]; then + fail "group already exists with gid '${_gid}'\n" + fi + + # check the user does not already exists with another gid + if [ -n "${_ugid}" -a ${_ugid} -ne ${gid} ]; then + fail "user already exists with gid '${_ugid}'\n" + fi + fi + + if [ ${uid} -lt -1 -o ${uid} -eq 0 ]; then + fail "invalid uid '%d'\n" ${uid} + elif [ ${uid} -ne -1 ]; then + # check the uid is not already used for another user + if [ -n "${_username}" -a "${_username}" != "${username}" ]; then + fail "uid is already used by user '${_username}'\n" + fi + + # check the user does not already exists with another uid + if [ -n "${_uid}" -a ${_uid} -ne ${uid} ]; then + fail "user already exists with uid '${_uid}'\n" + fi + fi + + # check the user does not already exist in another group + if [ -n "${_ugroup}" -a "${_ugroup}" != "${group}" ]; then + fail "user already exists with group '${_ugroup}'\n" + fi + + return 0 +} + +#---------------------------------------------------------------------------- +# Generate a unique GID for given group. If the group already exists, +# then simply report its current GID. Otherwise, generate the lowest GID +# that is: +# - not 0 +# - comprised in [MIN_GID..MAX_GID] +# - not already used by a group +generate_gid() { + local group="${1}" + local gid + + gid="$( get_gid "${group}" )" + if [ -z "${gid}" ]; then + for(( gid=MIN_GID; gid<=MAX_GID; gid++ )); do + if [ -z "$( get_group "${gid}" )" ]; then + break + fi + done + if [ ${gid} -gt ${MAX_GID} ]; then + fail "can not allocate a GID for group '%s'\n" "${group}" + fi + fi + printf "%d\n" "${gid}" +} + +#---------------------------------------------------------------------------- +# Add a group; if it does already exist, remove it first +add_one_group() { + local group="${1}" + local gid="${2}" + local _f + + # Generate a new GID if needed + if [ ${gid} -eq -1 ]; then + gid="$( generate_gid "${group}" )" + fi + + # Remove any previous instance of this group, and re-add the new one + sed -i -e '/^'"${group}"':.*/d;' "${GROUP}" + printf "%s:x:%d:\n" "${group}" "${gid}" >>"${GROUP}" + + # Ditto for /etc/gshadow if it exists + if [ -f "${GSHADOW}" ]; then + sed -i -e '/^'"${group}"':.*/d;' "${GSHADOW}" + printf "%s:*::\n" "${group}" >>"${GSHADOW}" + fi +} + +#---------------------------------------------------------------------------- +# Generate a unique UID for given username. If the username already exists, +# then simply report its current UID. Otherwise, generate the lowest UID +# that is: +# - not 0 +# - comprised in [MIN_UID..MAX_UID] +# - not already used by a user +generate_uid() { + local username="${1}" + local uid + + uid="$( get_uid "${username}" )" + if [ -z "${uid}" ]; then + for(( uid=MIN_UID; uid<=MAX_UID; uid++ )); do + if [ -z "$( get_username "${uid}" )" ]; then + break + fi + done + if [ ${uid} -gt ${MAX_UID} ]; then + fail "can not allocate a UID for user '%s'\n" "${username}" + fi + fi + printf "%d\n" "${uid}" +} + +#---------------------------------------------------------------------------- +# Add given user to given group, if not already the case +add_user_to_group() { + local username="${1}" + local group="${2}" + local _f + + for _f in "${GROUP}" "${GSHADOW}"; do + [ -f "${_f}" ] || continue + sed -r -i -e 's/^('"${group}"':.*:)(([^:]+,)?)'"${username}"'(,[^:]+*)?$/\1\2\4/;' \ + -e 's/^('"${group}"':.*)$/\1,'"${username}"'/;' \ + -e 's/,+/,/' \ + -e 's/:,/:/' \ + "${_f}" + done +} + +#---------------------------------------------------------------------------- +# Encode a password +encode_password() { + local passwd="${1}" + + mkpasswd -m "${PASSWD_METHOD}" "${passwd}" +} + +#---------------------------------------------------------------------------- +# Add a user; if it does already exist, remove it first +add_one_user() { + local username="${1}" + local uid="${2}" + local group="${3}" + local gid="${4}" + local passwd="${5}" + local home="${6}" + local shell="${7}" + local groups="${8}" + local comment="${9}" + local _f _group _home _shell _gid _passwd + + # First, sanity-check the user + check_user_validity "${username}" "${uid}" "${group}" "${gid}" + + # Generate a new UID if needed + if [ ${uid} -eq -1 ]; then + uid="$( generate_uid "${username}" )" + fi + + # Remove any previous instance of this user + for _f in "${PASSWD}" "${SHADOW}"; do + sed -r -i -e '/^'"${username}"':.*/d;' "${_f}" + done + + _gid="$( get_gid "${group}" )" + _shell="${shell}" + if [ "${shell}" = "-" ]; then + _shell="/bin/false" + fi + case "${home}" in + -) _home="/";; + /) fail "home can not explicitly be '/'\n";; + /*) _home="${home}";; + *) fail "home must be an absolute path\n";; + esac + case "${passwd}" in + !=*) + _passwd='!'"$( encode_passwd "${passwd#!=}" )" + ;; + =*) + _passwd="$( encode_passwd "${passwd#=}" )" + ;; + *) + _passwd="${passwd}" + ;; + esac + + printf "%s:x:%d:%d:%s:%s:%s\n" \ + "${username}" "${uid}" "${_gid}" \ + "${comment}" "${_home}" "${_shell}" \ + >>"${PASSWD}" + printf "%s:%s:::::::\n" \ + "${username}" "${_passwd}" \ + >>"${SHADOW}" + + # Add the user to its additional groups + if [ "${groups}" != "-" ]; then + for _group in ${groups//,/ }; do + add_user_to_group "${username}" "${_group}" + done + fi + + # If the user has a home, chown it + # (Note: stdout goes to the fakeroot-script) + if [ "${home}" != "-" ]; then + mkdir -p "${TARGET_DIR}/${home}" + printf "chown -R %d:%d '%s'\n" "${uid}" "${_gid}" "${TARGET_DIR}/${home}" + fi +} + +#---------------------------------------------------------------------------- +main() { + local username uid group gid passwd home shell groups comment + + # Some sanity checks + if [ ${MIN_UID} -le 0 ]; then + fail "MIN_UID must be >0 (currently %d)\n" ${MIN_UID} + fi + if [ ${MIN_GID} -le 0 ]; then + fail "MIN_GID must be >0 (currently %d)\n" ${MIN_GID} + fi + + # We first create groups whose gid is not -1, and then we create groups + # whose gid is -1 (automatic), so that, if a group is defined both with + # a specified gid and an automatic gid, we ensure the specified gid is + # used, rather than a different automatic gid is computed. + + # First, create all the main groups which gid is *not* automatic + while read username uid group gid passwd home shell groups comment; do + [ -n "${username}" ] || continue # Package with no user + [ ${gid} -ge 0 ] || continue # Automatic gid + add_one_group "${group}" "${gid}" + done <"${USERS_TABLE}" + + # Then, create all the main groups which gid *is* automatic + while read username uid group gid passwd home shell groups comment; do + [ -n "${username}" ] || continue # Package with no user + [ ${gid} -eq -1 ] || continue # Non-automatic gid + add_one_group "${group}" "${gid}" + done <"${USERS_TABLE}" + + # Then, create all the additional groups + # If any additional group is already a main group, we should use + # the gid of that main group; otherwise, we can use any gid + while read username uid group gid passwd home shell groups comment; do + [ -n "${username}" ] || continue # Package with no user + if [ "${groups}" != "-" ]; then + for g in ${groups//,/ }; do + add_one_group "${g}" -1 + done + fi + done <"${USERS_TABLE}" + + # When adding users, we do as for groups, in case two packages create + # the same user, one with an automatic uid, the other with a specified + # uid, to ensure the specified uid is used, rather than an incompatible + # uid be generated. + + # Now, add users whose uid is *not* automatic + while read username uid group gid passwd home shell groups comment; do + [ -n "${username}" ] || continue # Package with no user + [ ${uid} -ge 0 ] || continue # Automatic uid + add_one_user "${username}" "${uid}" "${group}" "${gid}" "${passwd}" \ + "${home}" "${shell}" "${groups}" "${comment}" + done <"${USERS_TABLE}" + + # Finally, add users whose uid *is* automatic + while read username uid group gid passwd home shell groups comment; do + [ -n "${username}" ] || continue # Package with no user + [ ${uid} -eq -1 ] || continue # Non-automatic uid + add_one_user "${username}" "${uid}" "${group}" "${gid}" "${passwd}" \ + "${home}" "${shell}" "${groups}" "${comment}" + done <"${USERS_TABLE}" +} + +#---------------------------------------------------------------------------- +main "${@}" |