1 files changed, 187 insertions, 0 deletions
diff --git a/sources/boa.conf b/sources/boa.conf
new file mode 100644
index 000000000..ccb956331
--- /dev/null
+++ b/sources/boa.conf
@@ -0,0 +1,187 @@
+# Boa v0.94 configuration file
+# File format has not changed from 0.93
+# File format has changed little from 0.92
+# version changes are noted in the comments
+#
+# The Boa configuration file is parsed with a lex/yacc or flex/bison
+# generated parser.  If it reports an error, the line number will be
+# provided; it should be easy to spot.  The syntax of each of these
+# rules is very simple, and they can occur in any order.  Where possible
+# these directives mimic those of NCSA httpd 1.3; I saw no reason to 
+# introduce gratuitous differences.
+
+# $Id: boa.conf,v 1.1 2001/12/22 00:56:12 andersen Exp $
+
+# The "ServerRoot" is not in this configuration file.  It can be compiled
+# into the server (see defines.h) or specified on the command line with
+# the -c option, for example:
+#
+# boa -c /usr/local/boa
+
+
+# Port: The port Boa runs on.  The default port for http servers is 80.
+# If it is less than 1024, the server must be started as root.
+
+Port 80
+
+# Listen: the Internet address to bind(2) to.  If you leave it out,
+# it takes the behavior before 0.93.17.2, which is to bind to all
+# addresses (INADDR_ANY).  You only get one "Listen" directive,
+# if you want service on multiple IP addresses, you have three choices:
+#    1. Run boa without a "Listen" directive
+#       a. All addresses are treated the same; makes sense if the addresses
+#          are localhost, ppp, and eth0.
+#       b. Use the VirtualHost directive below to point requests to different
+#          files.  Should be good for a very large number of addresses (web
+#          hosting clients).
+#    2. Run one copy of boa per IP address, each has its own configuration
+#       with a "Listen" directive.  No big deal up to a few tens of addresses.
+#       Nice separation between clients.
+# The name you provide gets run through inet_aton(3), so you have to use dotted
+# quad notation.  This configuration is too important to trust some DNS.
+
+#Listen 192.68.0.5
+
+#  User: The name or UID the server should run as.
+# Group: The group name or GID the server should run as.
+
+User nobody
+Group nobody
+
+# ServerAdmin: The email address where server problems should be sent.
+# Note: this is not currently used, except as an environment variable
+# for CGIs.
+
+#ServerAdmin root@localhost
+
+# ErrorLog: The location of the error log file. If this does not start
+# with /, it is considered relative to the server root.
+# Set to /dev/null if you don't want errors logged.
+# If unset, defaults to /dev/stderr
+
+ErrorLog /var/log/boa/error_log
+# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
+#  is somewhat experimental and might fail under heavy load.
+# "Usual libc implementations of printf will stall the whole
+#  process if the receiving end of a pipe stops reading."
+#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"
+
+# AccessLog: The location of the access log file. If this does not
+# start with /, it is considered relative to the server root.
+# Comment out or set to /dev/null (less effective) to disable 
+# Access logging.
+
+AccessLog /var/log/boa/access_log
+# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
+#  is somewhat experimental and might fail under heavy load.
+# "Usual libc implementations of printf will stall the whole
+#  process if the receiving end of a pipe stops reading."
+#AccessLog  "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"
+
+# UseLocaltime: Logical switch.  Uncomment to use localtime 
+# instead of UTC time
+#UseLocaltime
+
+# VerboseCGILogs: this is just a logical switch.
+#  It simply notes the start and stop times of cgis in the error log
+# Comment out to disable.
+
+#VerboseCGILogs
+
+# ServerName: the name of this server that should be sent back to 
+# clients if different than that returned by gethostname + gethostbyname 
+
+#ServerName www.your.org.here
+
+# VirtualHost: a logical switch.
+# Comment out to disable.
+# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
+# become /var/www/IP-A.
+# Example: http://localhost/ becomes /var/www/127.0.0.1
+#
+# Not used until version 0.93.17.2.  This "feature" also breaks commonlog
+# output rules, it prepends the interface number to each access_log line.
+# You are expected to fix that problem with a postprocessing script.
+
+#VirtualHost 
+
+# DocumentRoot: The root directory of the HTML documents.
+# Comment out to disable server non user files.
+
+DocumentRoot /var/www
+
+# UserDir: The name of the directory which is appended onto a user's home
+# directory if a ~user request is recieved.
+
+UserDir public_html
+
+# DirectoryIndex: Name of the file to use as a pre-written HTML
+# directory index.  Please MAKE AND USE THESE FILES.  On the
+# fly creation of directory indexes can be _slow_.
+# Comment out to always use DirectoryMaker
+
+DirectoryIndex index.html
+
+# DirectoryMaker: Name of program used to create a directory listing.
+# Comment out to disable directory listings.  If both this and
+# DirectoryIndex are commented out, accessing a directory will give
+# an error (though accessing files in the directory are still ok).
+
+DirectoryMaker /usr/lib/boa/boa_indexer
+
+# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
+# has been commented out, the the on-the-fly indexing of Boa can be used
+# to generate indexes of directories. Be warned that the output is 
+# extremely minimal and can cause delays when slow disks are used.
+# Note: The DirectoryCache must be writable by the same user/group that 
+# Boa runs as.
+
+# DirectoryCache /var/spool/boa/dircache
+
+# KeepAliveMax: Number of KeepAlive requests to allow per connection
+# Comment out, or set to 0 to disable keepalive processing
+
+KeepAliveMax 1000
+
+# KeepAliveTimeout: seconds to wait before keepalive connection times out
+
+KeepAliveTimeout 10
+
+# MimeTypes: This is the file that is used to generate mime type pairs
+# and Content-Type fields for boa.
+# Set to /dev/null if you do not want to load a mime types file.
+# Do *not* comment out (better use AddType!)
+
+MimeTypes /etc/mime.types
+
+# DefaultType: MIME type used if the file extension is unknown, or there
+# is no file extension.
+
+DefaultType text/plain
+
+# AddType: adds types without editing mime.types
+# Example: AddType type extension [extension ...]
+
+# Uncomment the next line if you want .cgi files to execute from anywhere
+#AddType application/x-httpd-cgi cgi
+
+# Redirect, Alias, and ScriptAlias all have the same semantics -- they
+# match the beginning of a request and take appropriate action.  Use
+# Redirect for other servers, Alias for the same server, and ScriptAlias
+# to enable directories for script execution.
+
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Example: Redirect /bar http://elsewhere/feh/bar
+
+# Aliases: Aliases one path to another.
+# Example: Alias /path1/bar /path2/foo
+
+# Alias /doc /usr/doc
+
+# ScriptAlias: Maps a virtual path to a directory for serving scripts
+# Example: ScriptAlias /htbin/ /www/htbin/
+
+ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
+