diff options
Diffstat (limited to 'package/dhcp')
| -rw-r--r-- | package/dhcp/default-relay | 12 | ||||
| -rw-r--r-- | package/dhcp/default-server | 7 | ||||
| -rw-r--r-- | package/dhcp/dhclient.conf | 50 | ||||
| -rw-r--r-- | package/dhcp/dhcp.mk | 20 | ||||
| -rw-r--r-- | package/dhcp/dhcp_xecute.patch | 452 | ||||
| -rw-r--r-- | package/dhcp/dhcpd.conf | 108 | ||||
| -rwxr-xr-x | package/dhcp/init-relay | 44 | ||||
| -rwxr-xr-x | package/dhcp/init-server | 44 |
8 files changed, 728 insertions, 9 deletions
diff --git a/package/dhcp/default-relay b/package/dhcp/default-relay new file mode 100644 index 000000000..59249db28 --- /dev/null +++ b/package/dhcp/default-relay @@ -0,0 +1,12 @@ +# Defaults for dhcp-relay initscript +# sourced by /etc/init.d/dhcp-relay + +# What servers should the DHCP relay forward requests to? +# e.g: SERVERS="192.168.0.1" +SERVERS="" + +# On what interfaces should the DHCP relay (dhrelay) serve DHCP requests? +INTERFACES="" + +# Additional options that are passed to the DHCP relay daemon? +OPTIONS=""
\ No newline at end of file diff --git a/package/dhcp/default-server b/package/dhcp/default-server new file mode 100644 index 000000000..0385d1699 --- /dev/null +++ b/package/dhcp/default-server @@ -0,0 +1,7 @@ +# Defaults for dhcp initscript +# sourced by /etc/init.d/dhcp-server +# installed at /etc/default/dhcp-server by the maintainer scripts + +# On what interfaces should the DHCP server (dhcpd) serve DHCP requests? +# Separate multiple interfaces with spaces, e.g. "eth0 eth1". +INTERFACES="" diff --git a/package/dhcp/dhclient.conf b/package/dhcp/dhclient.conf new file mode 100644 index 000000000..0e6dcf96c --- /dev/null +++ b/package/dhcp/dhclient.conf @@ -0,0 +1,50 @@ +# Configuration file for /sbin/dhclient, which is included in Debian's +# dhcp3-client package. +# +# This is a sample configuration file for dhclient. See dhclient.conf's +# man page for more information about the syntax of this file +# and a more comprehensive list of the parameters understood by +# dhclient. +# +# Normally, if the DHCP server provides reasonable information and does +# not leave anything out (like the domain name, for example), then +# few changes must be made to this file, if any. +# + +#send host-name "andare.fugue.com"; +#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c; +#send dhcp-lease-time 3600; +#supersede domain-name "fugue.com home.vix.com"; +#prepend domain-name-servers 127.0.0.1; +request subnet-mask, broadcast-address, time-offset, routers, + domain-name, domain-name-servers, host-name, + netbios-name-servers, netbios-scope; +#require subnet-mask, domain-name-servers; +#timeout 60; +#retry 60; +#reboot 10; +#select-timeout 5; +#initial-interval 2; +#script "/etc/dhcp3/dhclient-script"; +#media "-link0 -link1 -link2", "link0 link1"; +#reject 192.33.137.209; + +#alias { +# interface "eth0"; +# fixed-address 192.5.5.213; +# option subnet-mask 255.255.255.255; +#} + +#lease { +# interface "eth0"; +# fixed-address 192.33.137.200; +# medium "link0 link1"; +# option host-name "andare.swiftmedia.com"; +# option subnet-mask 255.255.255.0; +# option broadcast-address 192.33.137.255; +# option routers 192.33.137.250; +# option domain-name-servers 127.0.0.1; +# renew 2 2000/1/12 00:00:01; +# rebind 2 2000/1/12 00:00:01; +# expire 2 2000/1/12 00:00:01; +#} diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk index c99241313..20708edae 100644 --- a/package/dhcp/dhcp.mk +++ b/package/dhcp/dhcp.mk @@ -22,6 +22,7 @@ dhcp-source: $(DL_DIR)/$(DHCP) $(DHCP_DIR)/.unpacked: $(DL_DIR)/$(DHCP) $(DHCP_CAT) $(DL_DIR)/$(DHCP) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - + toolchain/patch-kernel.sh $(DHCP_DIR) package/dhcp/ dhcp*.patch touch $(DHCP_DIR)/.unpacked $(DHCP_DIR)/.configured: $(DHCP_DIR)/.unpacked @@ -29,29 +30,30 @@ $(DHCP_DIR)/.configured: $(DHCP_DIR)/.unpacked touch $(DHCP_DIR)/.configured $(DHCP_DIR)/$(DHCP_RELAY_BINARY): $(DHCP_DIR)/.configured - $(MAKE) CC=$(TARGET_CC) $(BVARS) -C $(DHCP_DIR) + $(MAKE) $(TARGET_CONFIGURE_OPTS) $(BVARS) -C $(DHCP_DIR) $(STRIP) $(DHCP_DIR)/$(DHCP_RELAY_BINARY) $(TARGET_DIR)/$(DHCP_SERVER_TARGET_BINARY): $(DHCP_DIR)/$(DHCP_RELAY_BINARY) (cd $(TARGET_DIR)/var/lib; ln -sf /tmp dhcp) - install -m 0755 $(DHCP_DIR)/dhcpd $(TARGET_DIR)/$(DHCP_SERVER_TARGET_BINARY) - install -m 0755 $(DHCP_DIR)/dhcp-server $(TARGET_DIR)/etc/init.d/dhcp-server - install -m 0644 $(DHCP_DIR)/dhcpd.conf $(TARGET_DIR)/etc/dhcp/dhcpd.conf + $(INSTALL) -m 0755 -D $(DHCP_DIR)/dhcpd $(TARGET_DIR)/$(DHCP_SERVER_TARGET_BINARY) + $(INSTALL) -m 0755 -D package/dhcp/init-server $(TARGET_DIR)/etc/init.d/dhcp-server + $(INSTALL) -m 0644 -D package/dhcp/dhcpd.conf $(TARGET_DIR)/etc/dhcp/dhcpd.conf + $(INSTALL) -m 0644 -D package/dhcp/default-server $(TARGET_DIR)/etc/default/dhcp-server rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY): $(DHCP_DIR)/$(DHCP_RELAY_BINARY) (cd $(TARGET_DIR)/var/lib; ln -sf /tmp dhcp) - install -m 0755 $(DHCP_DIR)/work.linux-2.2/relay/dhcrelay $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY) - install -m 0755 $(DHCP_DIR)/work.linux-2.2/relay/dhcp-relay $(TARGET_DIR)/etc/init.d/dhcp-relay - install -m 0644 $(DHCP_DIR)/dhclient.conf $(TARGET_DIR)/etc/default/dhcp-relay + $(INSTALL) -m 0755 -D $(DHCP_DIR)/work.linux-2.2/relay/dhcrelay $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY) + $(INSTALL) -m 0755 -D package/dhcp/init-relay $(TARGET_DIR)/etc/init.d/dhcp-relay + $(INSTALL) -m 0644 -D package/dhcp/default-relay $(TARGET_DIR)/etc/default/dhcp-relay rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc $(TARGET_DIR)/$(DHCP_CLIENT_TARGET_BINARY): $(DHCP_DIR)/$(DHCP_RELAY_BINARY) (cd $(TARGET_DIR)/var/lib; ln -sf /tmp dhcp) - install -m 0755 $(DHCP_DIR)/dhclient $(TARGET_DIR)/$(DHCP_CLIENT_TARGET_BINARY) - install -m 0644 $(DHCP_DIR)/dhclient.conf $(TARGET_DIR)/etc/dhcp/dhclient.conf + $(INSTALL) -m 0755 -D $(DHCP_DIR)/dhclient $(TARGET_DIR)/$(DHCP_CLIENT_TARGET_BINARY) + $(INSTALL) -m 0644 -D $(DHCP_DIR)/dhclient.conf $(TARGET_DIR)/etc/dhcp/dhclient.conf rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc diff --git a/package/dhcp/dhcp_xecute.patch b/package/dhcp/dhcp_xecute.patch new file mode 100644 index 000000000..358af5ff9 --- /dev/null +++ b/package/dhcp/dhcp_xecute.patch @@ -0,0 +1,452 @@ +diff -urN dhcp-3.0.1.orig/common/conflex.c dhcp-3.0.1/common/conflex.c +--- dhcp-3.0.1.orig/common/conflex.c 2004-06-10 11:59:14.000000000 -0600 ++++ dhcp-3.0.1/common/conflex.c 2005-02-16 12:41:43.000000000 -0700 +@@ -676,6 +676,8 @@ + return EVAL; + if (!strcasecmp (atom + 1, "ncapsulate")) + return ENCAPSULATE; ++ if (!strcasecmp (atom + 1, "xecute")) ++ return EXECUTE; + break; + case 'f': + if (!strcasecmp (atom + 1, "atal")) +diff -urN dhcp-3.0.1.orig/common/dhcp-eval.5 dhcp-3.0.1/common/dhcp-eval.5 +--- dhcp-3.0.1.orig/common/dhcp-eval.5 2004-06-10 11:59:15.000000000 -0600 ++++ dhcp-3.0.1/common/dhcp-eval.5 2005-02-16 12:41:43.000000000 -0700 +@@ -408,7 +408,32 @@ + Rebind - DHCP client is in the REBINDING state - it has an IP address, + and is trying to contact any server to renew it. The next message to + be sent will be a DHCPREQUEST, which will be broadcast. +-.RE ++.PP ++.B execute (\fIcommand-path\fB, \fIdata-expr1\fB ... \fIdata-exprN\fB)\fR ++.PP ++External command execution is possibly through execute expressions. Execute ++takes a variable number of arguments, where the first is the command ++name (full path or only the name of the executable) and following zero ++or more are data-expressions which values will be passed as external ++arguments. It returns the return code of the external command. ++.PP ++Execute is synchronous, and the program will block until the external ++command being run has finished. Please note that lengthy program ++execution (for example, in an "on commit" in the dhcpd) may result in ++bad performance and timed out clients. Try keeping the execution times ++short. ++.PP ++Passing user-supplied data might be dangerous. Check input buffers ++and make sure the external command handles all kinds of "unusual" ++characters (shell special characters in sh-scripts etc) correctly. ++.PP ++It is possible to use the execute expression in any context, not only ++on events. If you put it in a regular scope in the configuration file ++you will execute that command every time a scope is evaluated. ++.PP ++The execute expression is only available if you have defined ENABLE_EXECUTE ++in site.h before compilation. ++RE + .SH REFERENCE: LOGGING + Logging statements may be used to send information to the standard logging + channels. A logging statement includes an optional priority (\fBfatal\fR, +diff -urN dhcp-3.0.1.orig/common/parse.c dhcp-3.0.1/common/parse.c +--- dhcp-3.0.1.orig/common/parse.c 2004-06-17 14:54:38.000000000 -0600 ++++ dhcp-3.0.1/common/parse.c 2005-02-16 12:41:43.000000000 -0700 +@@ -3636,7 +3636,56 @@ + return 0; + } + break; +- ++ #ifdef ENABLE_EXECUTE ++ case EXECUTE: ++ token = next_token (&val, (unsigned *)0, cfile); ++ ++ if (!expression_allocate (expr, MDL)) ++ log_fatal ("can't allocate expression."); ++ ++ token = next_token (&val, (unsigned *)0, cfile); ++ if (token != LPAREN) { ++ parse_warn (cfile, "left parenthesis expected."); ++ skip_to_semi (cfile); ++ *lose = 1; ++ return 0; ++ } ++ token = next_token (&val, (unsigned *)0, cfile); ++ (*expr) -> data.funcall.name = ++ dmalloc (strlen (val) + 1, MDL); ++ if (!(*expr)->data.funcall.name) ++ log_fatal ("can't allocate command name"); ++ strcpy ((*expr) -> data.funcall.name, val); ++ token = next_token (&val, (unsigned *)0, cfile); ++ ep = &((*expr) -> data.funcall.arglist); ++ while (token == COMMA) { ++ if (!expression_allocate (ep, MDL)) ++ log_fatal ("can't allocate expression"); ++ if (!parse_data_expression (&(*ep) -> data.arg.val, ++ cfile, lose)) { ++ skip_to_semi (cfile); ++ *lose = 1; ++ return 0; ++ } ++ ep = &((*ep) -> data.arg.next); ++ token = next_token (&val, (unsigned *)0, cfile); ++ } ++ (*expr) -> op = expr_execute; ++ if (token != RPAREN) { ++ parse_warn (cfile, "right parenthesis expected."); ++ skip_to_semi (cfile); ++ *lose = 1; ++ return 0; ++ } ++ break; ++ #else ++ case EXECUTE: ++ parse_warn (cfile, "define ENABLE_EXECUTE in site.h to enable execute expressions."); ++ skip_to_semi (cfile); ++ *lose = 1; ++ return 0; ++ break; ++ #endif + case ENCODE_INT: + token = next_token (&val, (unsigned *)0, cfile); + token = next_token (&val, (unsigned *)0, cfile); +diff -urN dhcp-3.0.1.orig/common/print.c dhcp-3.0.1/common/print.c +--- dhcp-3.0.1.orig/common/print.c 2004-06-17 14:54:39.000000000 -0600 ++++ dhcp-3.0.1/common/print.c 2005-02-16 12:41:43.000000000 -0700 +@@ -459,6 +459,7 @@ + { + unsigned rv, left; + const char *s; ++ struct expression* next_arg; + + switch (expr -> op) { + case expr_none: +@@ -483,7 +484,8 @@ + return rv; + } + break; +- ++ ++ + case expr_equal: + if (len > 6) { + rv = 4; +@@ -1024,6 +1026,29 @@ + buf [rv++] = 0; + return rv; + } ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ rv = 11 + strlen (expr -> data.funcall.name); ++ if (len > rv + 2) { ++ sprintf (buf, ++ "(execute \"%s\"", ++ expr -> data.funcall.name); ++ for(next_arg = expr -> data.funcall.arglist; ++ next_arg; ++ next_arg = next_arg -> data.arg.next) { ++ if (len > rv + 3) ++ buf [rv++] = ' '; ++ rv += print_subexpression (next_arg -> ++ data.arg.val, ++ buf + rv, ++ len - rv - 2); ++ } ++ buf [rv++] = ')'; ++ buf [rv] = 0; ++ return rv; ++ } ++ break; ++ #endif + } + return 0; + } +diff -urN dhcp-3.0.1.orig/common/tree.c dhcp-3.0.1/common/tree.c +--- dhcp-3.0.1.orig/common/tree.c 2004-06-17 14:54:39.000000000 -0600 ++++ dhcp-3.0.1/common/tree.c 2005-02-16 12:41:43.000000000 -0700 +@@ -50,6 +50,113 @@ + int resolver_inited = 0; + #endif + ++#ifdef ENABLE_EXECUTE ++static unsigned long execute (char** args) ++{ ++pid_t p = fork(); ++if (p > 0) { ++int status; ++waitpid (p, &status, 0); ++return WEXITSTATUS(status); ++} ++else if(p == 0) { ++execvp (args[0], args); ++log_error ("Unable to execute %s: %s", args[0], ++strerror(errno)); ++_exit(127); ++} else { ++log_fatal ("unable to fork"); ++} ++return 1; /* never reached */ ++} ++ ++#define CAPACITY_INCREMENT 8 ++static void append_to_ary (char*** ary_ptr, int* ary_size, int* ary_capacity, ++char* new_element) ++{ ++(*ary_size)++; ++if (*ary_size > *ary_capacity) { ++char** new_ary; ++int new_ary_capacity = *ary_capacity + CAPACITY_INCREMENT; ++new_ary = dmalloc(new_ary_capacity*sizeof(char *), MDL); ++if (!new_ary) ++log_fatal ("no memory for array."); ++if (*ary_ptr != NULL) { ++memcpy (new_ary, *ary_ptr, ++(*ary_capacity)*sizeof(char *)); ++dfree (*ary_ptr, MDL); ++} ++*ary_ptr = new_ary; ++*ary_capacity = new_ary_capacity; ++} ++(*ary_ptr)[*ary_size-1] = new_element; ++} ++ ++static char* data_string_to_char_string (struct data_string* d) ++{ ++char* str = dmalloc (d->len+1, MDL); ++if (!str) ++log_fatal ("no memory for string."); ++/* FIXME: should one use d -> buffer -> data or d -> data? are ++they equivalent? */ ++strncpy (str, d -> data, d -> len); ++str[d->len] = '\0'; ++return str; ++} ++ ++static int evaluate_execute (unsigned long* result, struct packet *packet, ++struct lease *lease, ++struct client_state *client_state, ++struct option_state *in_options, ++struct option_state *cfg_options, ++struct binding_scope **scope, ++struct expression* expr) ++{ ++int status; ++int cmd_status; ++int i; ++struct data_string ds; ++struct expression* next_arg; ++char** arg_ary = NULL; ++int arg_ary_size = 0; ++int arg_ary_capacity = 0; ++append_to_ary (&arg_ary, &arg_ary_size, &arg_ary_capacity, ++ expr -> data.funcall.name); ++for(next_arg = expr -> data.funcall.arglist; ++next_arg; ++next_arg = next_arg -> data.arg.next) { ++memset (&ds, 0, sizeof ds); ++status = (evaluate_data_expression ++(&ds, packet, ++lease, client_state, in_options, ++cfg_options, scope, ++next_arg -> data.arg.val, ++MDL)); ++if (!status) { ++if (arg_ary) { ++for (i=1; i<arg_ary_size; i++) ++dfree (arg_ary[i], MDL); ++dfree(arg_ary, MDL); ++} ++return 0; ++} ++append_to_ary (&arg_ary, &arg_ary_size, &arg_ary_capacity, ++ data_string_to_char_string(&ds)); ++data_string_forget (&ds, MDL); ++} ++#if defined (DEBUG_EXPRESSIONS) ++log_debug ("exec: execute"); ++#endif ++append_to_ary (&arg_ary, &arg_ary_size, &arg_ary_capacity, NULL); ++*result = execute (arg_ary); ++for (i=1; i<arg_ary_size-1; i++) ++dfree (arg_ary[i], MDL); ++dfree(arg_ary, MDL); ++return 1; ++} ++#endif ++ ++ + pair cons (car, cdr) + caddr_t car; + pair cdr; +@@ -859,6 +966,9 @@ + case expr_extract_int8: + case expr_extract_int16: + case expr_extract_int32: ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ #endif + case expr_const_int: + case expr_lease_time: + case expr_dns_transaction: +@@ -1222,6 +1332,9 @@ + case expr_extract_int8: + case expr_extract_int16: + case expr_extract_int32: ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ #endif + case expr_const_int: + case expr_lease_time: + case expr_dns_transaction: +@@ -2084,6 +2197,9 @@ + case expr_extract_int8: + case expr_extract_int16: + case expr_extract_int32: ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ #endif + case expr_const_int: + case expr_lease_time: + case expr_dns_transaction: +@@ -2592,7 +2708,12 @@ + #endif + return 0; + } +- ++#ifdef ENABLE_EXECUTE ++ case expr_execute: ++ return evaluate_execute (result, packet, lease, ++ client_state, in_options, ++ cfg_options, scope, expr); ++#endif + case expr_ns_add: + case expr_ns_delete: + case expr_ns_exists: +@@ -3005,6 +3126,9 @@ + return (expr -> op == expr_extract_int8 || + expr -> op == expr_extract_int16 || + expr -> op == expr_extract_int32 || ++ #ifdef ENABLE_EXECUTE ++ expr -> op == expr_execute || ++ #endif + expr -> op == expr_const_int || + expr -> op == expr_lease_time || + expr -> op == expr_dns_transaction || +@@ -3040,6 +3164,9 @@ + expr -> op == expr_extract_int8 || + expr -> op == expr_extract_int16 || + expr -> op == expr_extract_int32 || ++ #ifdef ENABLE_EXECUTE ++ expr -> op == expr_execute || ++ #endif + expr -> op == expr_dns_transaction); + } + +@@ -3066,6 +3193,9 @@ + case expr_extract_int8: + case expr_extract_int16: + case expr_extract_int32: ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ #endif + case expr_encode_int8: + case expr_encode_int16: + case expr_encode_int32: +@@ -3160,6 +3290,9 @@ + case expr_extract_int8: + case expr_extract_int16: + case expr_extract_int32: ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ #endif + case expr_encode_int8: + case expr_encode_int16: + case expr_encode_int32: +@@ -3220,6 +3353,8 @@ + int firstp; + { + struct expression *e; ++ struct expression* next_arg; ++ + const char *s; + char obuf [65]; + int scol; +@@ -3691,7 +3826,27 @@ + expr -> data.variable); + col = token_print_indent (file, col, indent, "", "", ")"); + break; +- ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ col = token_print_indent (file, col, indent, "", "","execute"); ++ col = token_print_indent (file, col, indent, " ", "","("); ++ scol = col; ++ /* FIXME: use token_print_indent_concat() here? */ ++ col = token_print_indent (file, col, scol, "", "","\""); ++ col = token_print_indent (file, col, scol, "", "",expr -> data.funcall.name); ++ col = token_print_indent (file, col, scol, "", "","\""); ++ for(next_arg = expr -> data.funcall.arglist; ++ next_arg; ++ next_arg = next_arg -> data.arg.next) { ++ col = token_print_indent (file, col, scol, "", " ",","); ++ col = write_expression (file, ++ next_arg -> data.arg.val, ++ col, scol, 0); ++ } ++ col = token_print_indent (file, col, indent, "", "",")"); ++ ++ break; ++#endif + default: + log_fatal ("invalid expression type in print_expression: %d", + expr -> op); +@@ -3910,6 +4065,9 @@ + case expr_extract_int8: + case expr_extract_int16: + case expr_extract_int32: ++ #ifdef ENABLE_EXECUTE ++ case expr_execute: ++ #endif + case expr_encode_int8: + case expr_encode_int16: + case expr_encode_int32: +diff -urN dhcp-3.0.1.orig/includes/dhctoken.h dhcp-3.0.1/includes/dhctoken.h +--- dhcp-3.0.1.orig/includes/dhctoken.h 2004-06-10 11:59:30.000000000 -0600 ++++ dhcp-3.0.1/includes/dhctoken.h 2005-02-16 12:41:43.000000000 -0700 +@@ -307,7 +307,8 @@ + REMOVE = 611, + REFRESH = 612, + DOMAIN_NAME = 613, +- DO_FORWARD_UPDATE = 614 ++ DO_FORWARD_UPDATE = 614, ++ EXECUTE = 614 + }; + + #define is_identifier(x) ((x) >= FIRST_TOKEN && \ +diff -urN dhcp-3.0.1.orig/includes/site.h dhcp-3.0.1/includes/site.h +--- dhcp-3.0.1.orig/includes/site.h 2002-03-12 11:33:39.000000000 -0700 ++++ dhcp-3.0.1/includes/site.h 2005-02-16 12:41:43.000000000 -0700 +@@ -167,6 +167,12 @@ + + /* #define DHCPD_LOG_FACILITY LOG_DAEMON */ + ++/* Define this if you want to be able to execute external commands ++ during conditional evaluation. */ ++ ++/* #define ENABLE_EXECUTE */ ++ ++ + /* Define this if you aren't debugging and you want to save memory + (potentially a _lot_ of memory) by allocating leases in chunks rather + than one at a time. */ +diff -urN dhcp-3.0.1.orig/includes/tree.h dhcp-3.0.1/includes/tree.h +--- dhcp-3.0.1.orig/includes/tree.h 2004-06-10 11:59:31.000000000 -0600 ++++ dhcp-3.0.1/includes/tree.h 2005-02-16 12:41:43.000000000 -0700 +@@ -150,6 +150,9 @@ + expr_hardware, + expr_packet, + expr_const_data, ++ #ifdef ENABLE_EXECUTE ++ expr_execute, ++ #endif + expr_extract_int8, + expr_extract_int16, + expr_extract_int32, diff --git a/package/dhcp/dhcpd.conf b/package/dhcp/dhcpd.conf new file mode 100644 index 000000000..0001c0f00 --- /dev/null +++ b/package/dhcp/dhcpd.conf @@ -0,0 +1,108 @@ +# +# Sample configuration file for ISC dhcpd for Debian +# +# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ +# + +# The ddns-updates-style parameter controls whether or not the server will +# attempt to do a DNS update when a lease is confirmed. We default to the +# behavior of the version 2 packages ('none', since DHCP v2 didn't +# have support for DDNS.) +ddns-update-style none; + +# option definitions common to all supported networks... +option domain-name "example.org"; +option domain-name-servers ns1.example.org, ns2.example.org; + +default-lease-time 600; +max-lease-time 7200; + +# If this DHCP server is the official DHCP server for the local +# network, the authoritative directive should be uncommented. +#authoritative; + +# Use this to send dhcp log messages to a different log file (you also +# have to hack syslog.conf to complete the redirection). +log-facility local7; + +# No service will be given on this subnet, but declaring it helps the +# DHCP server to understand the network topology. + +#subnet 10.152.187.0 netmask 255.255.255.0 { +#} + +# This is a very basic subnet declaration. + +#subnet 10.254.239.0 netmask 255.255.255.224 { +# range 10.254.239.10 10.254.239.20; +# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; +#} + +# This declaration allows BOOTP clients to get dynamic addresses, +# which we don't really recommend. + +#subnet 10.254.239.32 netmask 255.255.255.224 { +# range dynamic-bootp 10.254.239.40 10.254.239.60; +# option broadcast-address 10.254.239.31; +# option routers rtr-239-32-1.example.org; +#} + +# A slightly different configuration for an internal subnet. +#subnet 10.5.5.0 netmask 255.255.255.224 { +# range 10.5.5.26 10.5.5.30; +# option domain-name-servers ns1.internal.example.org; +# option domain-name "internal.example.org"; +# option routers 10.5.5.1; +# option broadcast-address 10.5.5.31; +# default-lease-time 600; +# max-lease-time 7200; +#} + +# Hosts which require special configuration options can be listed in +# host statements. If no address is specified, the address will be +# allocated dynamically (if possible), but the host-specific information +# will still come from the host declaration. + +#host passacaglia { +# hardware ethernet 0:0:c0:5d:bd:95; +# filename "vmunix.passacaglia"; +# server-name "toccata.fugue.com"; +#} + +# Fixed IP addresses can also be specified for hosts. These addresses +# should not also be listed as being available for dynamic assignment. +# Hosts for which fixed IP addresses have been specified can boot using +# BOOTP or DHCP. Hosts for which no fixed address is specified can only +# be booted with DHCP, unless there is an address range on the subnet +# to which a BOOTP client is connected which has the dynamic-bootp flag +# set. +#host fantasia { +# hardware ethernet 08:00:07:26:c0:a5; +# fixed-address fantasia.fugue.com; +#} + +# You can declare a class of clients and then do address allocation +# based on that. The example below shows a case where all clients +# in a certain class get addresses on the 10.17.224/24 subnet, and all +# other clients get addresses on the 10.0.29/24 subnet. + +#class "foo" { +# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; +#} + +#shared-network 224-29 { +# subnet 10.17.224.0 netmask 255.255.255.0 { +# option routers rtr-224.example.org; +# } +# subnet 10.0.29.0 netmask 255.255.255.0 { +# option routers rtr-29.example.org; +# } +# pool { +# allow members of "foo"; +# range 10.17.224.10 10.17.224.250; +# } +# pool { +# deny members of "foo"; +# range 10.0.29.10 10.0.29.230; +# } +#} diff --git a/package/dhcp/init-relay b/package/dhcp/init-relay new file mode 100755 index 000000000..019a7e84c --- /dev/null +++ b/package/dhcp/init-relay @@ -0,0 +1,44 @@ +#!/bin/sh +# +# $Id: dhcp3-relay,v 1.1 2004/04/16 15:41:08 ml Exp $ +# + +# It is not safe to start if we don't have a default configuration... +if [ ! -f /etc/default/dhcp-relay ]; then + echo "/etc/default/dhcp-relay does not exist! - Aborting..." + echo "create this file to fix the problem." + exit 1 +fi + +# Read init script configuration (interfaces the daemon should listen on +# and the DHCP server we should forward requests to.) +. /etc/default/dhcp-relay + +# Build command line for interfaces (will be passed to dhrelay below.) +IFCMD="" +if test "$INTERFACES" != ""; then + for I in $INTERFACES; do + IFCMD=${IFCMD}"-i "${I}" " + done +fi + +DHCRELAYPID=/var/run/dhcrelay.pid + +case "$1" in + start) + start-stop-daemon -S -x /usr/sbin/dhcrelay -- -q $OPTIONS $IFCMD $SERVERS + ;; + stop) + start-stop-daemon -K -x /usr/sbin/dhcrelay + ;; + restart | force-reload) + $0 stop + sleep 2 + $0 start + ;; + *) + echo "Usage: /etc/init.d/dhcp-relay {start|stop|restart|force-reload}" + exit 1 +esac + +exit 0 diff --git a/package/dhcp/init-server b/package/dhcp/init-server new file mode 100755 index 000000000..34c20852b --- /dev/null +++ b/package/dhcp/init-server @@ -0,0 +1,44 @@ +#!/bin/sh +# +# $Id: dhcp3-server.init.d,v 1.4 2003/07/13 19:12:41 mdz Exp $ +# + +test -f /usr/sbin/dhcpd || exit 0 + +# It is not safe to start if we don't have a default configuration... +if [ ! -f /etc/default/dhcp-server ]; then + echo "/etc/default/dhcp-server does not exist! - Aborting..." + exit 0 +fi + +# Read init script configuration (so far only interfaces the daemon +# should listen on.) +. /etc/default/dhcp-server + +case "$1" in + start) + echo -n "Starting DHCP server: " + test -d /var/lib/dhcp/ || mkdir -p /var/lib/dhcp/ + test -f /var/lib/dhcp/dhcpd.leases || touch /var/lib/dhcp/dhcpd.leases + start-stop-daemon -S -x /usr/sbin/dhcpd -- -q $INTERFACES + echo "." + ;; + stop) + echo -n "Stopping DHCP server: dhcpd3" + start-stop-daemon -K -x /usr/sbin/dhcpd + echo "." + ;; + restart | force-reload) + $0 stop + sleep 2 + $0 start + if [ "$?" != "0" ]; then + exit 1 + fi + ;; + *) + echo "Usage: /etc/init.d/dhcp-server {start|stop|restart|force-reload}" + exit 1 +esac + +exit 0 |