diff options
Diffstat (limited to 'package/config/lex.zconf.c_shipped')
| -rw-r--r-- | package/config/lex.zconf.c_shipped | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/package/config/lex.zconf.c_shipped b/package/config/lex.zconf.c_shipped index b877bb6b3..22dda11f7 100644 --- a/package/config/lex.zconf.c_shipped +++ b/package/config/lex.zconf.c_shipped @@ -42,7 +42,7 @@ typedef uint32_t flex_uint32_t; typedef signed char flex_int8_t; typedef short int flex_int16_t; typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; +typedef unsigned char flex_uint8_t; typedef unsigned short int flex_uint16_t; typedef unsigned int flex_uint32_t; #endif /* ! C99 */ @@ -148,7 +148,7 @@ extern FILE *zconfin, *zconfout; #define EOB_ACT_LAST_MATCH 2 #define YY_LESS_LINENO(n) - + /* Return all but the first "n" matched characters back to the input stream. */ #define yyless(n) \ do \ @@ -215,7 +215,7 @@ struct yy_buffer_state int yy_bs_lineno; /**< The line count. */ int yy_bs_column; /**< The column count. */ - + /* Whether to try to fill the input buffer when we reach the * end of it. */ @@ -2089,7 +2089,7 @@ extern int zconfwrap (void ); #endif static void yyunput (int c,char *buf_ptr ); - + #ifndef yytext_ptr static void yy_flex_strncpy (char *,yyconst char *,int ); #endif @@ -2194,7 +2194,7 @@ YY_DECL register yy_state_type yy_current_state; register char *yy_cp, *yy_bp; register int yy_act; - + int str = 0; int ts, i; @@ -2899,7 +2899,7 @@ static int yy_get_next_buffer (void) { register yy_state_type yy_current_state; register char *yy_cp; - + yy_current_state = (yy_start); for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) @@ -2918,7 +2918,7 @@ static int yy_get_next_buffer (void) static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) { register int yy_is_jam; - + yy_current_state = yy_nxt[yy_current_state][1]; yy_is_jam = (yy_current_state <= 0); @@ -2928,7 +2928,7 @@ static int yy_get_next_buffer (void) static void yyunput (int c, register char * yy_bp ) { register char *yy_cp; - + yy_cp = (yy_c_buf_p); /* undo effects of setting up zconftext */ @@ -2971,7 +2971,7 @@ static int yy_get_next_buffer (void) { int c; - + *(yy_c_buf_p) = (yy_hold_char); if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) @@ -3038,12 +3038,12 @@ static int yy_get_next_buffer (void) /** Immediately switch to a different input stream. * @param input_file A readable stream. - * + * * @note This function does not reset the start condition to @c INITIAL . */ void zconfrestart (FILE * input_file ) { - + if ( ! YY_CURRENT_BUFFER ){ zconfensure_buffer_stack (); YY_CURRENT_BUFFER_LVALUE = @@ -3056,11 +3056,11 @@ static int yy_get_next_buffer (void) /** Switch to a different input buffer. * @param new_buffer The new input buffer. - * + * */ void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer ) { - + /* TODO. We should be able to replace this entire function body * with * zconfpop_buffer_state(); @@ -3100,13 +3100,13 @@ static void zconf_load_buffer_state (void) /** Allocate and initialize an input buffer state. * @param file A readable stream. * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * + * * @return the allocated buffer state. */ YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size ) { YY_BUFFER_STATE b; - + b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) ); if ( ! b ) YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" ); @@ -3129,11 +3129,11 @@ static void zconf_load_buffer_state (void) /** Destroy the buffer. * @param b a buffer created with zconf_create_buffer() - * + * */ void zconf_delete_buffer (YY_BUFFER_STATE b ) { - + if ( ! b ) return; @@ -3154,7 +3154,7 @@ static void zconf_load_buffer_state (void) { int oerrno = errno; - + zconf_flush_buffer(b ); b->yy_input_file = file; @@ -3170,13 +3170,13 @@ static void zconf_load_buffer_state (void) } b->yy_is_interactive = 0; - + errno = oerrno; } /** Discard all buffered characters. On the next scan, YY_INPUT will be called. * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * + * */ void zconf_flush_buffer (YY_BUFFER_STATE b ) { @@ -3205,7 +3205,7 @@ static void zconf_load_buffer_state (void) * the current state. This function will allocate the stack * if necessary. * @param new_buffer The new state. - * + * */ void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer ) { @@ -3235,7 +3235,7 @@ void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer ) /** Removes and deletes the top of the stack, if present. * The next element becomes the new top. - * + * */ void zconfpop_buffer_state (void) { @@ -3259,7 +3259,7 @@ void zconfpop_buffer_state (void) static void zconfensure_buffer_stack (void) { int num_to_alloc; - + if (!(yy_buffer_stack)) { /* First allocation is just for 2 elements, since we don't know if this @@ -3270,9 +3270,9 @@ static void zconfensure_buffer_stack (void) (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc (num_to_alloc * sizeof(struct yy_buffer_state*) ); - + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - + (yy_buffer_stack_max) = num_to_alloc; (yy_buffer_stack_top) = 0; return; @@ -3298,13 +3298,13 @@ static void zconfensure_buffer_stack (void) /** Setup the input buffer state to scan directly from a user-specified character buffer. * @param base the character buffer * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. + * + * @return the newly allocated buffer state object. */ YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size ) { YY_BUFFER_STATE b; - + if ( size < 2 || base[size-2] != YY_END_OF_BUFFER_CHAR || base[size-1] != YY_END_OF_BUFFER_CHAR ) @@ -3333,14 +3333,14 @@ YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size ) /** Setup the input buffer state to scan a string. The next call to zconflex() will * scan from a @e copy of @a str. * @param str a NUL-terminated string to scan - * + * * @return the newly allocated buffer state object. * @note If you want to scan bytes that may contain NUL values, then use * zconf_scan_bytes() instead. */ YY_BUFFER_STATE zconf_scan_string (yyconst char * str ) { - + return zconf_scan_bytes(str,strlen(str) ); } @@ -3348,7 +3348,7 @@ YY_BUFFER_STATE zconf_scan_string (yyconst char * str ) * scan from a @e copy of @a bytes. * @param bytes the byte buffer to scan * @param len the number of bytes in the buffer pointed to by @a bytes. - * + * * @return the newly allocated buffer state object. */ YY_BUFFER_STATE zconf_scan_bytes (yyconst char * bytes, int len ) @@ -3357,7 +3357,7 @@ YY_BUFFER_STATE zconf_scan_bytes (yyconst char * bytes, int len ) char *buf; yy_size_t n; int i; - + /* Get memory for full buffer, including space for trailing EOB's. */ n = len + 2; buf = (char *) zconfalloc(n ); @@ -3411,16 +3411,16 @@ static void yy_fatal_error (yyconst char* msg ) /* Accessor methods (get/set functions) to struct members. */ /** Get the current line number. - * + * */ int zconfget_lineno (void) { - + return zconflineno; } /** Get the input stream. - * + * */ FILE *zconfget_in (void) { @@ -3428,7 +3428,7 @@ FILE *zconfget_in (void) } /** Get the output stream. - * + * */ FILE *zconfget_out (void) { @@ -3436,7 +3436,7 @@ FILE *zconfget_out (void) } /** Get the length of the current token. - * + * */ int zconfget_leng (void) { @@ -3444,7 +3444,7 @@ int zconfget_leng (void) } /** Get the current token. - * + * */ char *zconfget_text (void) @@ -3454,18 +3454,18 @@ char *zconfget_text (void) /** Set the current line number. * @param line_number - * + * */ void zconfset_lineno (int line_number ) { - + zconflineno = line_number; } /** Set the input stream. This does not discard the current * input buffer. * @param in_str A readable stream. - * + * * @see zconf_switch_to_buffer */ void zconfset_in (FILE * in_str ) @@ -3491,7 +3491,7 @@ void zconfset_debug (int bdebug ) /* zconflex_destroy is for both reentrant and non-reentrant scanners. */ int zconflex_destroy (void) { - + /* Pop the buffer stack, destroying each element. */ while(YY_CURRENT_BUFFER){ zconf_delete_buffer(YY_CURRENT_BUFFER ); |