diff options
Diffstat (limited to 'package/boa')
| -rw-r--r-- | package/boa/boa-config.site-i386 | 1 | ||||
| -rw-r--r-- | package/boa/boa.conf | 187 | ||||
| -rw-r--r-- | package/boa/boa.mk | 8 | ||||
| -rw-r--r-- | package/boa/mime.types | 205 |
4 files changed, 397 insertions, 4 deletions
diff --git a/package/boa/boa-config.site-i386 b/package/boa/boa-config.site-i386 new file mode 100644 index 000000000..425d948c4 --- /dev/null +++ b/package/boa/boa-config.site-i386 @@ -0,0 +1 @@ +ac_cv_func_setvbuf_reversed=no diff --git a/package/boa/boa.conf b/package/boa/boa.conf new file mode 100644 index 000000000..f51c23731 --- /dev/null +++ b/package/boa/boa.conf @@ -0,0 +1,187 @@ +# Boa v0.94 configuration file +# File format has not changed from 0.93 +# File format has changed little from 0.92 +# version changes are noted in the comments +# +# The Boa configuration file is parsed with a lex/yacc or flex/bison +# generated parser. If it reports an error, the line number will be +# provided; it should be easy to spot. The syntax of each of these +# rules is very simple, and they can occur in any order. Where possible +# these directives mimic those of NCSA httpd 1.3; I saw no reason to +# introduce gratuitous differences. + +# $Id: boa.conf,v 1.1 2004/10/09 02:48:37 andersen Exp $ + +# The "ServerRoot" is not in this configuration file. It can be compiled +# into the server (see defines.h) or specified on the command line with +# the -c option, for example: +# +# boa -c /usr/local/boa + + +# Port: The port Boa runs on. The default port for http servers is 80. +# If it is less than 1024, the server must be started as root. + +Port 80 + +# Listen: the Internet address to bind(2) to. If you leave it out, +# it takes the behavior before 0.93.17.2, which is to bind to all +# addresses (INADDR_ANY). You only get one "Listen" directive, +# if you want service on multiple IP addresses, you have three choices: +# 1. Run boa without a "Listen" directive +# a. All addresses are treated the same; makes sense if the addresses +# are localhost, ppp, and eth0. +# b. Use the VirtualHost directive below to point requests to different +# files. Should be good for a very large number of addresses (web +# hosting clients). +# 2. Run one copy of boa per IP address, each has its own configuration +# with a "Listen" directive. No big deal up to a few tens of addresses. +# Nice separation between clients. +# The name you provide gets run through inet_aton(3), so you have to use dotted +# quad notation. This configuration is too important to trust some DNS. + +#Listen 192.68.0.5 + +# User: The name or UID the server should run as. +# Group: The group name or GID the server should run as. + +User nobody +Group nobody + +# ServerAdmin: The email address where server problems should be sent. +# Note: this is not currently used, except as an environment variable +# for CGIs. + +#ServerAdmin root@localhost + +# ErrorLog: The location of the error log file. If this does not start +# with /, it is considered relative to the server root. +# Set to /dev/null if you don't want errors logged. +# If unset, defaults to /dev/stderr + +ErrorLog /var/log/boa/error_log +# Please NOTE: Sending the logs to a pipe ('|'), as shown below, +# is somewhat experimental and might fail under heavy load. +# "Usual libc implementations of printf will stall the whole +# process if the receiving end of a pipe stops reading." +#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log" + +# AccessLog: The location of the access log file. If this does not +# start with /, it is considered relative to the server root. +# Comment out or set to /dev/null (less effective) to disable +# Access logging. + +AccessLog /var/log/boa/access_log +# Please NOTE: Sending the logs to a pipe ('|'), as shown below, +# is somewhat experimental and might fail under heavy load. +# "Usual libc implementations of printf will stall the whole +# process if the receiving end of a pipe stops reading." +#AccessLog "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log" + +# UseLocaltime: Logical switch. Uncomment to use localtime +# instead of UTC time +#UseLocaltime + +# VerboseCGILogs: this is just a logical switch. +# It simply notes the start and stop times of cgis in the error log +# Comment out to disable. + +#VerboseCGILogs + +# ServerName: the name of this server that should be sent back to +# clients if different than that returned by gethostname + gethostbyname + +#ServerName www.your.org.here + +# VirtualHost: a logical switch. +# Comment out to disable. +# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A' +# become /var/www/IP-A. +# Example: http://localhost/ becomes /var/www/127.0.0.1 +# +# Not used until version 0.93.17.2. This "feature" also breaks commonlog +# output rules, it prepends the interface number to each access_log line. +# You are expected to fix that problem with a postprocessing script. + +#VirtualHost + +# DocumentRoot: The root directory of the HTML documents. +# Comment out to disable server non user files. + +DocumentRoot /var/www + +# UserDir: The name of the directory which is appended onto a user's home +# directory if a ~user request is recieved. + +UserDir public_html + +# DirectoryIndex: Name of the file to use as a pre-written HTML +# directory index. Please MAKE AND USE THESE FILES. On the +# fly creation of directory indexes can be _slow_. +# Comment out to always use DirectoryMaker + +DirectoryIndex index.html + +# DirectoryMaker: Name of program used to create a directory listing. +# Comment out to disable directory listings. If both this and +# DirectoryIndex are commented out, accessing a directory will give +# an error (though accessing files in the directory are still ok). + +DirectoryMaker /usr/lib/boa/boa_indexer + +# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker +# has been commented out, the the on-the-fly indexing of Boa can be used +# to generate indexes of directories. Be warned that the output is +# extremely minimal and can cause delays when slow disks are used. +# Note: The DirectoryCache must be writable by the same user/group that +# Boa runs as. + +# DirectoryCache /var/spool/boa/dircache + +# KeepAliveMax: Number of KeepAlive requests to allow per connection +# Comment out, or set to 0 to disable keepalive processing + +KeepAliveMax 1000 + +# KeepAliveTimeout: seconds to wait before keepalive connection times out + +KeepAliveTimeout 10 + +# MimeTypes: This is the file that is used to generate mime type pairs +# and Content-Type fields for boa. +# Set to /dev/null if you do not want to load a mime types file. +# Do *not* comment out (better use AddType!) + +MimeTypes /etc/mime.types + +# DefaultType: MIME type used if the file extension is unknown, or there +# is no file extension. + +DefaultType text/plain + +# AddType: adds types without editing mime.types +# Example: AddType type extension [extension ...] + +# Uncomment the next line if you want .cgi files to execute from anywhere +#AddType application/x-httpd-cgi cgi + +# Redirect, Alias, and ScriptAlias all have the same semantics -- they +# match the beginning of a request and take appropriate action. Use +# Redirect for other servers, Alias for the same server, and ScriptAlias +# to enable directories for script execution. + +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: Redirect /bar http://elsewhere/feh/bar + +# Aliases: Aliases one path to another. +# Example: Alias /path1/bar /path2/foo + +# Alias /doc /usr/doc + +# ScriptAlias: Maps a virtual path to a directory for serving scripts +# Example: ScriptAlias /htbin/ /www/htbin/ + +ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ + diff --git a/package/boa/boa.mk b/package/boa/boa.mk index 1eb233fbc..07f29f441 100644 --- a/package/boa/boa.mk +++ b/package/boa/boa.mk @@ -24,10 +24,10 @@ $(BOA_DIR)/.unpacked: $(DL_DIR)/$(BOA_SOURCE) $(BOA_WORKDIR)/Makefile: $(BOA_DIR)/.unpacked rm -f $(BOA_WORKDIR)/Makefile mkdir -p $(BOA_WORKDIR) - (cd $(BOA_WORKDIR) && CONFIG_SITE=$(SOURCE_DIR)/boa-config.site-$(ARCH) \ + (cd $(BOA_WORKDIR) && CONFIG_SITE=package/boa/boa-config.site-$(ARCH) \ CC=$(TARGET_CC) $(BOA_DIR)/configure) touch $(BOA_WORKDIR)/.depend - + $(BOA_WORKDIR)/boa $(BOA_WORKDIR)/boa_indexer: $(BOA_WORKDIR)/Makefile rm -f $@ $(MAKE) VPATH=$(BOA_DIR)/src/ -C $(BOA_WORKDIR) @@ -38,8 +38,8 @@ $(BOA_WORKDIR)/.installed: $(BOA_WORKDIR)/boa $(BOA_WORKDIR)/boa_indexer mkdir -p $(TARGET_DIR)/usr/lib/boa cp -f $(BOA_WORKDIR)/src/boa_indexer $(TARGET_DIR)/usr/lib/boa/boa_indexer mkdir -p $(TARGET_DIR)/etc/boa - cp -f $(SOURCE_DIR)/boa.conf $(TARGET_DIR)/etc/boa - cp -f $(SOURCE_DIR)/mime.types $(TARGET_DIR)/etc/mime.types + cp -f package/boa/boa.conf $(TARGET_DIR)/etc/boa + cp -f package/boa/mime.types $(TARGET_DIR)/etc/mime.types strip --strip-all $(TARGET_DIR)/usr/sbin/boa $(TARGET_DIR)/usr/lib/boa/boa_indexer touch $(BOA_WORKDIR)/.installed diff --git a/package/boa/mime.types b/package/boa/mime.types new file mode 100644 index 000000000..53f6ea101 --- /dev/null +++ b/package/boa/mime.types @@ -0,0 +1,205 @@ +############################################################################### +# +# MIME-TYPES and the extensions that represent them +# +# This file is part of the "mime-support" package. Please send email (not a +# bug report) to mime-support@packages.debian.org if you would like new types +# and/or extensions to be added. +# +# Note: Compression schemes like "gzip", "bzip", and "compress" are not +# actually "mime-types". They are "encodings" and hence must _not_ have +# entries in this file to map their extensions. The "mime-type" of an +# encoded file refers to the type of data that has been encoded, not the +# type of the encoding. +# +############################################################################### + + +application/activemessage +application/andrew-inset +application/applefile +application/atomicmail +application/cu-seeme csm cu +application/dca-rft +application/dec-dx +application/dsptype tsp +application/futuresplash spl +application/ghostview +application/mac-binhex40 hqx +application/macwriteii +application/msaccess mdb +application/msword doc dot +application/news-message-id +application/news-transmission +application/octet-stream bin +application/oda oda +application/pdf pdf +application/pgp-signature pgp +application/postscript ps ai eps +application/remote-printing +application/rtf rtf +application/slate +application/vnd.ms-excel xls xlb +application/vnd.ms-powerpoint ppt pps pot +application/vnd.wap.wmlc wmlc +application/vnd.wap.wmlscriptc wmlsc +application/wita +application/wordperfect5.1 wp5 +application/zip zip +application/x-123 wk +application/x-bcpio bcpio +application/x-chess-pgn pgn +application/x-core +application/x-cpio cpio +application/x-csh +application/x-debian-package deb +application/x-director dcr dir dxr +application/x-dms dms +application/x-dvi dvi +application/x-executable +application/x-font pfa pfb gsf pcf pcf.Z +application/x-gnumeric gnumeric +application/x-gtar gtar tgz +application/x-hdf hdf +application/x-httpd-php phtml pht php +application/x-httpd-php3 php3 +application/x-httpd-php3-source phps +application/x-httpd-php3-preprocessed php3p +application/x-httpd-php4 php4 +application/x-ica ica +application/x-java class +application/x-javascript js +application/x-kdelnk +application/x-kchart chrt +application/x-killustrator kil +application/x-kpresenter kpr kpt +application/x-kspread ksp +application/x-kword kwd kwt +application/x-latex latex +application/x-lha lha +application/x-lzh lzh +application/x-lzx lzx +application/x-maker frm maker frame fm fb book fbdoc +application/x-mif mif +application/x-msdos-program com exe bat dll +application/x-msi msi +application/x-netcdf nc cdf +application/x-ns-proxy-autoconfig pac +application/x-object o +application/x-ogg ogg +application/x-oz-application oza +application/x-perl pl pm +application/x-redhat-package-manager rpm +application/x-rx +application/x-sh +application/x-shar shar +application/x-shellscript +application/x-shockwave-flash swf swfl +application/x-stuffit sit +application/x-sv4cpio sv4cpio +application/x-sv4crc sv4crc +application/x-tar tar +application/x-tcl +application/x-tex +application/x-tex-gf gf +application/x-tex-pk pk PK +application/x-texinfo texinfo texi +application/x-trash ~ % bak old sik +application/x-troff t tr roff +application/x-troff-man man +application/x-troff-me me +application/x-troff-ms ms +application/x-ustar ustar +application/x-wais-source src +application/x-wingz wz + +audio/basic au snd +audio/midi mid midi +audio/mpeg mpga mpega mp2 mp3 +audio/mpegurl m3u +audio/prs.sid sid +audio/x-aiff aif aiff aifc +audio/x-gsm gsm +audio/x-pn-realaudio ra rm ram +audio/x-wav wav + +image/bitmap bmp +image/gif gif +image/ief ief +image/jpeg jpeg jpg jpe +image/pcx pcx +image/png png +image/tiff tiff tif +image/vnd.wap.wbmp wbmp +image/x-cmu-raster ras +image/x-coreldraw cdr +image/x-coreldrawpattern pat +image/x-coreldrawtemplate cdt +image/x-corelphotopaint cpt +image/x-jng jng +image/x-portable-anymap pnm +image/x-portable-bitmap pbm +image/x-portable-graymap pgm +image/x-portable-pixmap ppm +image/x-rgb rgb +image/x-xbitmap xbm +image/x-xpixmap xpm +image/x-xwindowdump xwd + +inode/chardevice +inode/blockdevice +inode/directory-locked +inode/directory +inode/fifo +inode/socket + +message/external-body +message/news +message/partial +message/rfc822 + +multipart/alternative +multipart/appledouble +multipart/digest +multipart/mixed +multipart/parallel + +text/comma-separated-values csv +text/css css +text/english +text/html htm html xhtml +text/mathml mml +text/plain txt text diff +text/richtext rtx +text/tab-separated-values tsv +text/vnd.wap.wml wml +text/vnd.wap.wmlscript wmls +text/xml xml +text/x-c++hdr h++ hpp hxx hh +text/x-c++src c++ cpp cxx cc +text/x-chdr h +text/x-crontab +text/x-csh csh +text/x-csrc c +text/x-java java +text/x-makefile +text/x-moc moc +text/x-pascal p pas +text/x-setext etx +text/x-sh sh +text/x-tcl tcl tk +text/x-tex tex ltx sty cls +text/x-vcalendar vcs +text/x-vcard vcf + +video/dl dl +video/fli fli +video/gl gl +video/mpeg mpeg mpg mpe +video/quicktime qt mov +video/x-mng mng +video/x-ms-asf asf asx +video/x-msvideo avi +video/x-sgi-movie movie + +x-world/x-vrml vrm vrml wrl |