diff options
Diffstat (limited to 'package/Makefile.package.in')
| -rw-r--r-- | package/Makefile.package.in | 397 |
1 files changed, 397 insertions, 0 deletions
diff --git a/package/Makefile.package.in b/package/Makefile.package.in new file mode 100644 index 000000000..fbd7f6931 --- /dev/null +++ b/package/Makefile.package.in @@ -0,0 +1,397 @@ +################################################################################ +# Generic package infrastructure +# +# This file implements an infrastructure that eases development of +# package .mk files. It should be used for all non-autotools based +# packages. Autotools-based packages should use the specialized +# autotools infrastructure in package/Makefile.autotools.in. +# +# See the Buildroot documentation for details on the usage of this +# infrastructure +# +# In terms of implementation, this generic infrastructure requires the +# .mk file to specify: +# +# 1. Metadata informations about the package: name, version, +# download URL, etc. +# +# 2. Description of the commands to be executed to configure, build +# and install the package +# +# The autotools infrastructure specializes this generic infrastructure +# by already implementing the configure, build and install steps. +################################################################################ + +# UPPERCASE Macro -- transform its argument to uppercase and replace dots and +# hyphens to underscores +UPPERCASE = $(shell echo $(1) | tr "a-z.-" "A-Z__") + +# Define extrators for different archive suffixes +INFLATE.bz2 = $(BZCAT) +INFLATE.gz = $(ZCAT) +INFLATE.tbz = $(BZCAT) +INFLATE.tgz = $(ZCAT) +INFLATE.tar = cat + +# MESSAGE Macro -- display a message in bold type +MESSAGE = echo "$(TERM_BOLD)>>> $($(PKG)_NAME) $($(PKG)_VERSION) $(1)$(TERM_RESET)" +TERM_BOLD := $(shell tput smso) +TERM_RESET := $(shell tput rmso) + +################################################################################ +# DOWNLOAD -- Download helper. Will try to download source from: +# 1) BR2_PRIMARY_SITE if enabled +# 2) Download site +# 3) BR2_BACKUP_SITE if enabled +# +# Argument 1 is the source location +# Argument 2 is the source filename +# +# E.G. use like this: +# $(call DOWNLOAD,$(FOO_SITE),$(FOO_SOURCE)) +################################################################################ + +# support make source-check/external-deps +ifneq ($(SPIDER),) +DOWNLOAD=$(WGET) -P $(DL_DIR) $(1)/$(2) +else +define DOWNLOAD + $(Q)test -e $(DL_DIR)/$(2) || \ + for site in $(call qstrip,$(BR2_PRIMARY_SITE)) $(1) $(call qstrip,$(BR2_BACKUP_SITE)); \ + do $(WGET) -P $(DL_DIR) $$site/$(2) && exit; done +endef +endif + +# Utility programs used to build packages +TAR ?= tar + +# Automatically detect tar --strip-path/components option +TAR_STRIP_COMPONENTS := \ + $(shell $(TAR) --help | grep strip-path > /dev/null ; \ + if test $$? = 0 ; then \ + echo '--strip-path' ; \ + else \ + echo '--strip-components' ; \ + fi) + +# Needed for the foreach loops to loop over the list of hooks, so that +# each hook call is properly separated by a newline. +define sep + + +endef + +################################################################################ +# Implicit targets -- produce a stamp file for each step of a package build +################################################################################ + +# Retrieve the archive +$(BUILD_DIR)/%/.stamp_downloaded: +# support make source-check/external-deps +ifeq ($(SPIDER),) +# Only show the download message if it isn't already downloaded + $(Q)(test -e $(DL_DIR)/$($(PKG)_SOURCE) && \ + (test -z $($(PKG)_PATCH) || test -e $(DL_DIR)$($(PKG)_PATCH))) || \ + $(call MESSAGE,"Downloading") +endif + $(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_SOURCE)) + $(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_PATCH))) +ifeq ($(SPIDER),) + $(Q)mkdir -p $(@D) + $(Q)touch $@ +endif + +# Unpack the archive +$(BUILD_DIR)/%/.stamp_extracted: + @$(call MESSAGE,"Extracting") + $(Q)mkdir -p $(@D) + $(Q)$(INFLATE$(suffix $($(PKG)_SOURCE))) $(DL_DIR)/$($(PKG)_SOURCE) | \ + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) - +# some packages have messed up permissions inside + $(Q)chmod -R ug+rw $(@D) + $(foreach hook,$($(PKG)_POST_EXTRACT_HOOKS),$(call $(hook))$(sep)) + $(Q)touch $@ + +# Patch +# +# The NOHOSTPKG variable is the uppercased package name, without the +# HOST_ prefix, even for host packages. This allows to find the +# patches in the package directory, because $($(NOHOSTPKG)_NAME) +# expands to the package directory name. +# +$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $($(NOHOSTPKG)_NAME)-$($(PKG)_VERSION) +$(BUILD_DIR)/%/.stamp_patched: + @$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$($(PKG)_NAME)") + $(if $($(PKG)_PATCH),toolchain/patch-kernel.sh $(@D) $(DL_DIR) $($(PKG)_PATCH)) + $(Q)( \ + if test -d $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME); then \ + if test "$(wildcard $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME)/$(NAMEVER)*.patch*)"; then \ + toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME) $(NAMEVER)\*.patch $(NAMEVER)\*.patch.$(ARCH) || exit 1; \ + else \ + toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME) $($(NOHOSTPKG)_NAME)\*.patch $($(NOHOSTPKG)_NAME)\*.patch.$(ARCH) || exit 1; \ + if test -d $($(PKG)_DIR_PREFIX)/$($(PKG)_NAME)/$(NAMEVER); then \ + toolchain/patch-kernel.sh $(@D) $($(PKG)_DIR_PREFIX)/$($(NOHOSTPKG)_NAME)/$(NAMEVER) \*.patch \*.patch.$(ARCH) || exit 1; \ + fi; \ + fi; \ + fi; \ + ) + $(foreach hook,$($(PKG)_POST_PATCH_HOOKS),$(call $(hook))$(sep)) + $(Q)touch $@ + +# Configure +$(BUILD_DIR)/%/.stamp_configured: + @$(call MESSAGE,"Configuring") + $($(PKG)_CONFIGURE_CMDS) + $(foreach hook,$($(PKG)_POST_CONFIGURE_HOOKS),$(call $(hook))$(sep)) + $(Q)touch $@ + +# Build +$(BUILD_DIR)/%/.stamp_built:: + @$(call MESSAGE,"Building") + $($(PKG)_BUILD_CMDS) + $(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep)) + $(Q)touch $@ + +# Install to host dir +$(BUILD_DIR)/%/.stamp_host_installed: + @$(call MESSAGE,'Installing to host directory') + $($(PKG)_INSTALL_CMDS) + $(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep)) + $(Q)touch $@ + +# Install to staging dir +$(BUILD_DIR)/%/.stamp_staging_installed: + @$(call MESSAGE,'Installing to staging directory') + $($(PKG)_INSTALL_STAGING_CMDS) + $(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep)) + $(Q)touch $@ + +# Install to target dir +$(BUILD_DIR)/%/.stamp_target_installed: + @$(call MESSAGE,"Installing to target") + $($(PKG)_INSTALL_TARGET_CMDS) + $(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep)) + $(if $(BR2_HAVE_MANPAGES),,for d in man share/man; do \ + rm -rf $(TARGET_DIR)/$$d $(TARGET_DIR)/usr/$$d; \ + done) + $(if $(BR2_HAVE_INFOPAGES),,for d in info share/info; do \ + rm -rf $(TARGET_DIR)/$$d $(TARGET_DIR)/usr/$$d; \ + done) + $(if $(BR2_HAVE_DOCUMENTATION),,for d in doc share/doc; do \ + rm -rf $(TARGET_DIR)/$$d $(TARGET_DIR)/usr/$$d; \ + done) + $(Q)touch $@ + +# Clean package +$(BUILD_DIR)/%/.stamp_cleaned: + @$(call MESSAGE,"Cleaning up") + $($(PKG)_CLEAN_CMDS) + rm -f $(@D)/.stamp_built + +# Uninstall package from target and staging +$(BUILD_DIR)/%/.stamp_uninstalled: + @$(call MESSAGE,"Uninstalling") + $($(PKG)_UNINSTALL_STAGING_CMDS) + rm -f $($(PKG)_TARGET_INSTALL_STAGING) + $($(PKG)_UNINSTALL_TARGET_CMDS) + rm -f $($(PKG)_TARGET_INSTALL_TARGET) $($(PKG)_HOOK_POST_INSTALL) + +# Remove package sources +$(BUILD_DIR)/%/.stamp_dircleaned: + rm -Rf $(@D) + +################################################################################ +# GENTARGETS_INNER -- generates the make targets needed to build a +# generic package +# +# argument 1 is the lowercase package name +# argument 2 is the uppercase package name, including an HOST_ prefix +# for host packages +# argument 3 is the uppercase package name, without the HOST_ prefix +# for host packages +# argument 4 is the package directory prefix +# argument 5 is the type (target or host) +################################################################################ + +define GENTARGETS_INNER + +# Define default values for various package-related variables, if not +# already defined. For some variables (version, source, site and +# subdir), if they are undefined, we try to see if a variable without +# the HOST_ prefix is defined. If so, we use such a variable, so that +# these informations have only to be specified once, for both the +# target and host packages of a given .mk file. + +$(2)_TYPE = $(5) +$(2)_NAME = $(1) + +ifndef $(2)_VERSION + ifdef $(3)_VERSION + $(2)_VERSION = $($(3)_VERSION) + else + $(2)_VERSION = undefined + endif +endif + +$(2)_DIR = $$(BUILD_DIR)/$(1)-$$($(2)_VERSION) + +ifndef $(2)_SOURCE + ifdef $(3)_SOURCE + $(2)_SOURCE = $($(3)_SOURCE) + else + $(2)_SOURCE ?= $(1)-$$($(2)_VERSION).tar.gz + endif +endif + +ifndef $(2)_PATCH + ifdef $(3)_PATCH + $(2)_PATCH = $($(3)_PATCH) + endif +endif + +ifndef $(2)_SITE + ifdef $(3)_SITE + $(2)_SITE = $($(3)_SITE) + else + $(2)_SITE ?= \ + http://$$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/$(1) + endif +endif + +$(2)_DEPENDENCIES ?= +$(2)_INSTALL_STAGING ?= NO +$(2)_INSTALL_TARGET ?= YES +$(2)_DIR_PREFIX = $(if $(4),$(4),$(TOP_SRCDIR)/package) + +# define sub-target stamps +$(2)_TARGET_INSTALL_TARGET = $$($(2)_DIR)/.stamp_target_installed +$(2)_TARGET_INSTALL_STAGING = $$($(2)_DIR)/.stamp_staging_installed +$(2)_TARGET_INSTALL_HOST = $$($(2)_DIR)/.stamp_host_installed +$(2)_TARGET_BUILD = $$($(2)_DIR)/.stamp_built +$(2)_TARGET_CONFIGURE = $$($(2)_DIR)/.stamp_configured +$(2)_TARGET_PATCH = $$($(2)_DIR)/.stamp_patched +$(2)_TARGET_EXTRACT = $$($(2)_DIR)/.stamp_extracted +$(2)_TARGET_SOURCE = $$($(2)_DIR)/.stamp_downloaded +$(2)_TARGET_UNINSTALL = $$($(2)_DIR)/.stamp_uninstalled +$(2)_TARGET_CLEAN = $$($(2)_DIR)/.stamp_cleaned +$(2)_TARGET_DIRCLEAN = $$($(2)_DIR)/.stamp_dircleaned + +# new-style hooks +$(2)_POST_EXTRACT_HOOKS ?= +$(2)_POST_PATCH_HOOKS ?= +$(2)_POST_CONFIGURE_HOOKS ?= +$(2)_POST_BUILD_HOOKS ?= +$(2)_POST_INSTALL_HOOKS ?= +$(2)_POST_INSTALL_STAGING_HOOKS ?= +$(2)_POST_INSTALL_TARGET_HOOKS ?= + +# old-style hooks +$(2)_HOOK_POST_EXTRACT = $$($(2)_DIR)/.stamp_hook_post_extract +$(2)_HOOK_POST_CONFIGURE = $$($(2)_DIR)/.stamp_hook_post_configure +$(2)_HOOK_POST_BUILD = $$($(2)_DIR)/.stamp_hook_post_build +$(2)_HOOK_POST_INSTALL = $$($(2)_DIR)/.stamp_hook_post_install + +# human-friendly targets and target sequencing +$(1): $(1)-install + +ifeq ($$($(2)_TYPE),host) +$(1)-install: $(1)-install-host $$($(2)_HOOK_POST_INSTALL) +else +$(1)-install: $(1)-install-staging $(1)-install-target \ + $$($(2)_HOOK_POST_INSTALL) +endif + +ifeq ($$($(2)_INSTALL_TARGET),YES) +$(1)-install-target: $(1)-build \ + $$($(2)_TARGET_INSTALL_TARGET) +else +$(1)-install-target: +endif + +ifeq ($$($(2)_INSTALL_STAGING),YES) +$(1)-install-staging: $(1)-build \ + $$($(2)_TARGET_INSTALL_STAGING) +else +$(1)-install-staging: +endif + +$(1)-install-host: $(1)-build $$($(2)_TARGET_INSTALL_HOST) + +$(1)-build: $(1)-configure \ + $$($(2)_TARGET_BUILD) \ + $$($(2)_HOOK_POST_BUILD) + +$(1)-configure: $(1)-patch \ + $$($(2)_TARGET_CONFIGURE) \ + $$($(2)_HOOK_POST_CONFIGURE) + +$(1)-patch: $(1)-extract $$($(2)_TARGET_PATCH) + +$(1)-extract: $(1)-depends \ + $$($(2)_TARGET_EXTRACT) \ + $$($(2)_HOOK_POST_EXTRACT) + +$(1)-depends: $(1)-source $$($(2)_DEPENDENCIES) + +$(1)-source: $$($(2)_TARGET_SOURCE) + +$(1)-uninstall: $(1)-configure $$($(2)_TARGET_UNINSTALL) + +$(1)-clean: $(1)-uninstall \ + $$($(2)_TARGET_CLEAN) + +$(1)-dirclean: $$($(2)_TARGET_DIRCLEAN) + +# define the PKG variable for all targets, containing the +# uppercase package variable prefix +$$($(2)_TARGET_INSTALL_TARGET): PKG=$(2) +$$($(2)_TARGET_INSTALL_STAGING): PKG=$(2) +$$($(2)_TARGET_INSTALL_HOST): PKG=$(2) +$$($(2)_TARGET_BUILD): PKG=$(2) +$$($(2)_TARGET_CONFIGURE): PKG=$(2) +$$($(2)_TARGET_PATCH): PKG=$(2) +$$($(2)_TARGET_PATCH): NOHOSTPKG=$(3) +$$($(2)_TARGET_EXTRACT): PKG=$(2) +$$($(2)_TARGET_SOURCE): PKG=$(2) +$$($(2)_TARGET_UNINSTALL): PKG=$(2) +$$($(2)_TARGET_CLEAN): PKG=$(2) +$$($(2)_TARGET_DIRCLEAN): PKG=$(2) +$$($(2)_HOOK_POST_EXTRACT): PKG=$(2) +$$($(2)_HOOK_POST_CONFIGURE): PKG=$(2) +$$($(2)_HOOK_POST_BUILD): PKG=$(2) +$$($(2)_HOOK_POST_INSTALL): PKG=$(2) + +# define hook targets +# default hook behaviour: do nothing +$$($(2)_HOOK_POST_EXTRACT): +$$($(2)_HOOK_POST_CONFIGURE): +$$($(2)_HOOK_POST_BUILD): +$$($(2)_HOOK_POST_INSTALL): + +# add package to the general list of targets if requested by the buildroot +# configuration + +ifeq ($$(BR2_PACKAGE_$(2)),y) +TARGETS += $(1) +endif +endef + +################################################################################ +# GENTARGETS -- the target generator macro for generic packages +# +# Argument 1 is the package directory prefix [mandatory] +# Argument 2 is the lowercase package name [mandatory] +# Argument 3 is "target" or "host" [optional, default: "target"] +################################################################################ + +define GENTARGETS +ifeq ($(3),host) +# In the case of host packages, turn the package name "pkg" into "host-pkg" +$(call GENTARGETS_INNER,$(3)-$(2),$(call UPPERCASE,$(3)-$(2)),$(call UPPERCASE,$(2)),$(1),host) +else +# In the case of target packages, keep the package name "pkg" +$(call GENTARGETS_INNER,$(2),$(call UPPERCASE,$(2)),$(call UPPERCASE,$(2)),$(1),target) +endif +endef + +# :mode=makefile: |