diff options
Diffstat (limited to 'make')
| -rw-r--r-- | make/ext2root.mk | 2 | ||||
| -rw-r--r-- | make/gcc_target.mk | 66 | ||||
| -rw-r--r-- | make/hotplug.mk | 39 | ||||
| -rw-r--r-- | make/jpeg.mk | 68 | ||||
| -rw-r--r-- | make/links.mk | 2 | ||||
| -rw-r--r-- | make/lrzsz.mk | 74 | ||||
| -rw-r--r-- | make/make.mk | 2 | ||||
| -rw-r--r-- | make/microcom.mk | 60 | ||||
| -rw-r--r-- | make/mkdosfs.mk | 44 | ||||
| -rw-r--r-- | make/mke2fs.mk | 69 | ||||
| -rw-r--r-- | make/netkitbase.mk | 74 | ||||
| -rw-r--r-- | make/netkittelnet.mk | 73 | ||||
| -rw-r--r-- | make/ntp.mk | 61 | ||||
| -rw-r--r-- | make/pciutils.mk | 69 | ||||
| -rw-r--r-- | make/pcmcia.mk | 92 | ||||
| -rw-r--r-- | make/pppd.mk | 66 | ||||
| -rw-r--r-- | make/rxvt.mk | 68 | ||||
| -rw-r--r-- | make/sfdisk.mk | 34 | ||||
| -rw-r--r-- | make/tinyx.mk | 125 | ||||
| -rw-r--r-- | make/tn5250.mk | 47 |
20 files changed, 1118 insertions, 17 deletions
diff --git a/make/ext2root.mk b/make/ext2root.mk index e56b2fe8d..ad0dd1db5 100644 --- a/make/ext2root.mk +++ b/make/ext2root.mk @@ -36,7 +36,7 @@ GENEXT2_REALSIZE=$(subst total,, $(shell du $(TARGET_DIR) -s -c -k | grep total GENEXT2_SIZE=$(shell expr $(GENEXT2_REALSIZE) + $(GENEXT2_ADDTOROOTSIZE)) # We currently add about 400 device nodes, so add that into the total GENEXT2_INODES=$(shell expr $(shell find $(TARGET_DIR) | wc -l) + 400) -#GENEXT2_SIZE=100000 +GENEXT2_SIZE=100000 ext2root: genext2fs -@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) --strip-unneeded 2>/dev/null || true; diff --git a/make/gcc_target.mk b/make/gcc_target.mk index 20ebc5b25..d98b3d31a 100644 --- a/make/gcc_target.mk +++ b/make/gcc_target.mk @@ -22,7 +22,6 @@ # hacking on the toolchain... # ############################################################# -GNU_TARGET_NAME:=$(ARCH)-linux TARGET_LANGUAGES:=c,c++ # If you want multilib enabled, enable this... @@ -52,21 +51,27 @@ $(BINUTILS_DIR2)/.configured: #(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../lib) #(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../include) (cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../include sys-include) - (cd $(BINUTILS_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CROSS)gcc \ + (cd $(BINUTILS_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \ + RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \ + CC=$(TARGET_CROSS)gcc \ $(BINUTILS_DIR)/configure \ + --target=$(GNU_TARGET_NAME) \ --prefix=/usr \ --exec-prefix=/usr \ --bindir=/usr/bin \ --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ --sysconfdir=/etc \ --datadir=/usr/share \ - --includedir=/usr/include \ --libdir=/usr/lib \ --localstatedir=/var \ --mandir=/usr/man \ --infodir=/usr/info \ - --with-gxx-include-dir=/usr/include/c++ \ - --disable-shared $(MULTILIB) ); + --includedir=$(STAGING_DIR)/include \ + --with-gxx-include-dir=$(STAGING_DIR)/include/c++ \ + --disable-shared $(MULTILIB) \ + --program-prefix="" \ + ); touch $(BINUTILS_DIR2)/.configured $(BINUTILS_DIR2)/binutils/objdump: $(BINUTILS_DIR2)/.configured @@ -75,7 +80,11 @@ $(BINUTILS_DIR2)/binutils/objdump: $(BINUTILS_DIR2)/.configured CC=$(TARGET_CROSS)gcc -C $(BINUTILS_DIR2) $(TARGET_DIR)/usr/bin/ld: $(BINUTILS_DIR2)/binutils/objdump - PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(HOSTCC) GCC_FOR_TARGET=$(TARGET_CROSS)gcc \ + AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \ + LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \ + CC_FOR_TARGET=$(TARGET_CROSS)gcc \ + $(MAKE) \ prefix=$(TARGET_DIR)/usr \ exec_prefix=$(TARGET_DIR)/usr \ bindir=$(TARGET_DIR)/usr/bin \ @@ -169,24 +178,53 @@ $(GCC_BUILD_DIR3)/.gcc_build_hacks: $(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR3)/.gcc_build_hacks (cd $(GCC_BUILD_DIR3); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \ - RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld CC=$(TARGET_CROSS)gcc \ - $(GCC_DIR)/configure \ + RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \ + CC=$(TARGET_CROSS)gcc $(GCC_DIR)/configure \ + --target=$(GNU_TARGET_NAME) \ --prefix=$(TARGET_DIR)/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ --mandir=/usr/man \ --infodir=/usr/info \ + --with-local-prefix=/usr/local \ + --libdir=/usr/lib \ + --includedir=$(STAGING_DIR)/include \ + --with-gxx-include-dir=$(STAGING_DIR)/include/c++ \ + --oldincludedir=$(STAGING_DIR)/include \ --enable-shared $(MULTILIB) \ - --enable-target-optspace --disable-nls --with-gnu-ld \ - --enable-languages=$(TARGET_LANGUAGES) --disable-__cxa_atexit ); + --enable-target-optspace --disable-nls \ + --with-gnu-ld --disable-__cxa_atexit \ + --enable-languages=$(TARGET_LANGUAGES) \ + $(EXTRA_GCC_CONFIG_OPTIONS) \ + --program-prefix="" \ + ); + #$(GNU_TARGET_NAME) \ + #--target=$(GNU_TARGET_NAME) \ + # touch $(GCC_BUILD_DIR3)/.configured $(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured - PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) AR=$(TARGET_CROSS)ar \ - RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld \ - CC=$(TARGET_CROSS)gcc -C $(GCC_BUILD_DIR3) + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CROSS)gcc \ + AR=$(TARGET_CROSS)ar RANLIB=$(TARGET_CROSS)ranlib \ + LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \ + AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \ + LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \ + CC_FOR_TARGET=$(TARGET_CROSS)gcc LIBGCC2_INCLUDES=$(TARGET_DIR)/usr/include \ + $(MAKE) -C $(GCC_BUILD_DIR3) touch $(GCC_BUILD_DIR3)/.compiled $(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled - PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CROSS)gcc \ + AR=$(TARGET_CROSS)ar RANLIB=$(TARGET_CROSS)ranlib \ + LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \ + AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \ + LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \ + CC_FOR_TARGET=$(TARGET_CROSS)gcc $(MAKE) \ prefix=$(TARGET_DIR)/usr \ exec_prefix=$(TARGET_DIR)/usr \ bindir=$(TARGET_DIR)/usr/bin \ diff --git a/make/hotplug.mk b/make/hotplug.mk new file mode 100644 index 000000000..2c3428d98 --- /dev/null +++ b/make/hotplug.mk @@ -0,0 +1,39 @@ +############################################################# +# +# hotplug support +# +############################################################# +HOTPLUG_SOURCE=diethotplug-0.4.tar.gz +HOTPLUG_SITE=http://telia.dl.sourceforge.net/sourceforge/linux-hotplug +HOTPLUG_DIR=$(BUILD_DIR)/diethotplug-0.4 +HOTPLUG_PATCH=$(SOURCE_DIR)/hotplug.patch + +$(DL_DIR)/$(HOTPLUG_SOURCE): + $(WGET) -P $(DL_DIR) $(HOTPLUG_SITE)/$(HOTPLUG_SOURCE) + +$(HOTPLUG_DIR): $(DL_DIR)/$(HOTPLUG_SOURCE) $(HOTPLUG_PATCH) + zcat $(DL_DIR)/$(HOTPLUG_SOURCE) | tar -C $(BUILD_DIR) -xvf - + cat $(HOTPLUG_PATCH) | patch -p1 -d $(HOTPLUG_DIR) + +$(HOTPLUG_DIR)/hotplug: $(HOTPLUG_DIR) + $(MAKE) CROSS=$(TARGET_CROSS) DEBUG=false KLIBC=false \ + KERNEL_INCLUDE_DIR=$(STAGING_DIR)/include \ + TARGET_DIR=$(TARGET_DIR) -C $(HOTPLUG_DIR); + $(STRIP) $(HOTPLUG_DIR)/hotplug; + touch -c $(HOTPLUG_DIR)/hotplug + +$(TARGET_DIR)/sbin/hotplug: $(HOTPLUG_DIR)/hotplug + cp $(HOTPLUG_DIR)/hotplug $(TARGET_DIR)/sbin/hotplug; + touch -c $(TARGET_DIR)/sbin/hotplug + +hotplug: uclibc $(TARGET_DIR)/sbin/hotplug + +ext2root-source: $(DL_DIR)/$(HOTPLUG_SOURCE) + +hotplug-clean: + rm -f $(TARGET_DIR)/sbin/hotplug + -$(MAKE) -C $(HOTPLUG_DIR) clean + +hotplug-dirclean: + rm -rf $(HOTPLUG_DIR) + diff --git a/make/jpeg.mk b/make/jpeg.mk new file mode 100644 index 000000000..92ecb7817 --- /dev/null +++ b/make/jpeg.mk @@ -0,0 +1,68 @@ +############################################################# +# +# jpeg (libraries needed by some apps) +# +############################################################# +# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org> +# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA +JPEG_DIR=$(BUILD_DIR)/jpeg-6b +JPEG_SITE:=ftp://ftp.uu.net/graphics/jpeg/ +JPEG_SOURCE=jpegsrc.v6b.tar.gz +JPEG_CAT:=zcat + +$(DL_DIR)/$(JPEG_SOURCE): + $(WGET) -P $(DL_DIR) $(JPEG_SITE)/$(JPEG_SOURCE) + +jpeg-source: $(DL_DIR)/$(JPEG_SOURCE) + +$(JPEG_DIR)/.unpacked: $(DL_DIR)/$(JPEG_SOURCE) + $(JPEG_CAT) $(DL_DIR)/$(JPEG_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(JPEG_DIR)/.unpacked + +$(JPEG_DIR)/.configured: $(JPEG_DIR)/.unpacked + zcat $(DL_DIR)/$(JPEG_SOURCE) | tar -C $(BUILD_DIR) -xvf - + (cd $(JPEG_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --enable-shared \ + ); + touch $(JPEG_DIR)/.configured + +$(STAGING_DIR)/lib/libjpeg.so.62.0.0: $(JPEG_DIR)/.configured + $(MAKE) -C $(JPEG_DIR) CC=$(TARGET_CROSS)gcc all + $(MAKE) -C $(JPEG_DIR) install-lib + $(MAKE) -C $(JPEG_DIR) install-headers + +$(TARGET_DIR)/lib/libjpeg.so.62.0.0: $(STAGING_DIR)/lib/libjpeg.so.62.0.0 + cp -dpf $(STAGING_DIR)/lib/libjpeg.so* $(TARGET_DIR)/lib/ + +jpeg: uclibc $(TARGET_DIR)/lib/libjpeg.so.62.0.0 + +jpeg-clean: + -$(MAKE) -C $(JPEG_DIR) clean diff --git a/make/links.mk b/make/links.mk index 675aea94a..9ce78d59b 100644 --- a/make/links.mk +++ b/make/links.mk @@ -28,7 +28,7 @@ $(LINKS_DIR)/.configured: $(LINKS_DIR)/.unpacked --libexecdir=/usr/lib \ --sysconfdir=/etc \ --datadir=/usr/share \ - --localstatedir=/var \ + --localstatedir=/tmp \ --mandir=/usr/man \ --infodir=/usr/info \ --disable-nls \ diff --git a/make/lrzsz.mk b/make/lrzsz.mk new file mode 100644 index 000000000..bcb4293f9 --- /dev/null +++ b/make/lrzsz.mk @@ -0,0 +1,74 @@ +############################################################# +# +# lrzsz (provided zmodem) +# +############################################################# +# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org> +# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA + +LRZSZ_SITE:=http://www.ohse.de/uwe/releases +LRZSZ_SOURCE:=lrzsz-0.12.20.tar.gz +LRZSZ_DIR:=$(BUILD_DIR)/lrzsz-0.12.20 + +$(DL_DIR)/$(LRZSZ_SOURCE): + $(WGET) -P $(DL_DIR) $(LRZSZ_SITE)/$(LRZSZ_SOURCE) + +lrzsz-source: $(DL_DIR)/$(LRZSZ_SOURCE) + +$(LRZSZ_DIR)/.unpacked: $(DL_DIR)/$(LRZSZ_SOURCE) + zcat $(DL_DIR)/$(LRZSZ_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(LRZSZ_DIR)/.unpacked + +$(LRZSZ_DIR)/.configured: $(LRZSZ_DIR)/.unpacked + (cd $(LRZSZ_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/tmp \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + --disable-timesync \ + ); + perl -i -p -e "s/-lnsl//;" $(LRZSZ_DIR)/src/Makefile + perl -i -p -e "s~(#define ENABLE_SYSLOG.*)~/* \1 */~;" $(LRZSZ_DIR)/config.h + touch $(LRZSZ_DIR)/.configured + +$(LRZSZ_DIR)/src/lrz: $(LRZSZ_DIR)/.configured + $(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" prefix="$(TARGET_DIR)" -C $(LRZSZ_DIR) + $(STRIP) $(LRZSZ_DIR)/src/lrz $(LRZSZ_DIR)/src/lsz + +$(TARGET_DIR)/usr/bin/rz: $(LRZSZ_DIR)/src/lrz + cp $(LRZSZ_DIR)/src/lrz $(TARGET_DIR)/usr/bin/rz + cp $(LRZSZ_DIR)/src/lsz $(TARGET_DIR)/usr/bin/sz + +lrzsz: uclibc $(TARGET_DIR)/usr/bin/rz + +lrzsz-clean: + rm -f $(TARGET_DIR)/usr/bin/rz + -$(MAKE) -C $(LRZSZ_DIR) clean + +lrzsz-dirclean: + rm -rf $(LRZSZ_DIR) diff --git a/make/make.mk b/make/make.mk index 718af3090..539dd474d 100644 --- a/make/make.mk +++ b/make/make.mk @@ -5,8 +5,8 @@ ############################################################# GNUMAKE_SOURCE:=make-3.80.tar.bz2 GNUMAKE_SITE:=ftp://ftp.gnu.org/gnu/make -GNUMAKE_CAT:=bzcat GNUMAKE_DIR:=$(BUILD_DIR)/make-3.80 +GNUMAKE_CAT:=bzcat GNUMAKE_BINARY:=make GNUMAKE_TARGET_BINARY:=usr/bin/make diff --git a/make/microcom.mk b/make/microcom.mk new file mode 100644 index 000000000..e0c751262 --- /dev/null +++ b/make/microcom.mk @@ -0,0 +1,60 @@ +############################################################# +# +# microcom terminal emulator +# +# Maintainer: Tim Riker <Tim@Rikers.org> +# +############################################################# +# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org> +# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA + +# TARGETS +# http://microcom.port5.com/m102.tar.gz +MICROCOM_SITE:=http://microcom.port5.com/ +MICROCOM_SOURCE:=m102.tar.gz +MICROCOM_DIR:=$(BUILD_DIR)/microcom-1.02 + +$(DL_DIR)/$(MICROCOM_SOURCE): + $(WGET) -P $(DL_DIR) $(MICROCOM_SITE)/$(MICROCOM_SOURCE) + +microcom-source: $(DL_DIR)/$(MICROCOM_SOURCE) + +$(MICROCOM_DIR)/.unpacked: $(DL_DIR)/$(MICROCOM_SOURCE) + zcat $(DL_DIR)/$(MICROCOM_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(MICROCOM_DIR)/.unpacked + +$(MICROCOM_DIR)/.configured: $(MICROCOM_DIR)/.unpacked + mkdir -p $(MICROCOM_DIR) + zcat $(DL_DIR)/$(MICROCOM_SOURCE) | tar -C $(MICROCOM_DIR) -xvf - + perl -i -p -e 's~gcc~${TARGET_CC}~' $(MICROCOM_DIR)/Makefile + touch $(MICROCOM_DIR)/.configured + +$(MICROCOM_DIR)/microcom: $(MICROCOM_DIR)/.configured + $(MAKE) -C $(MICROCOM_DIR) + +$(TARGET_DIR)/usr/bin/microcom: $(MICROCOM_DIR)/microcom + install -c $(MICROCOM_DIR)/microcom $(TARGET_DIR)/usr/bin/microcom + +microcom-clean: + rm $(MICROCOM_DIR)/*.o + +microcom-dirclean: + rm -rf $(MICROCOM_DIR) + +microcom: uclibc $(TARGET_DIR)/usr/bin/microcom + diff --git a/make/mkdosfs.mk b/make/mkdosfs.mk new file mode 100644 index 000000000..a3132686b --- /dev/null +++ b/make/mkdosfs.mk @@ -0,0 +1,44 @@ +############################################################# +# +# mkdosfs +# +############################################################# +MKDOSFS_SOURCE=dosfstools-2.8.src.tar.gz +MKDOSFS_SITE=http://ftp.uni-erlangen.de/pub/Linux/LOCAL/dosfstools +MKDOSFS_DIR=$(BUILD_DIR)/dosfstools-2.8 +MKDOSFS_CAT:=zcat +MKDOSFS_BINARY:=mkdosfs/mkdosfs +MKDOSFS_TARGET_BINARY:=sbin/mkdosfs +ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true) +MKDOSFS_CFLAGS="-Os -g -D_FILE_OFFSET_BITS=64 -D__USE_FILE_OFFSET64" +else +MKDOSFS_CFLAGS="-Os -g" +endif + +$(DL_DIR)/$(MKDOSFS_SOURCE): + $(WGET) -P $(DL_DIR) $(MKDOSFS_SITE)/$(MKDOSFS_SOURCE) + +mkdosfs-source: $(DL_DIR)/$(MKDOSFS_SOURCE) + +$(MKDOSFS_DIR)/.unpacked: $(DL_DIR)/$(MKDOSFS_SOURCE) + $(MKDOSFS_CAT) $(DL_DIR)/$(MKDOSFS_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(MKDOSFS_DIR)/.unpacked + +$(MKDOSFS_DIR)/$(MKDOSFS_BINARY): $(MKDOSFS_DIR)/.unpacked + $(MAKE) CFLAGS=$(MKDOSFS_CFLAGS) CC=$(TARGET_CC1) -C $(MKDOSFS_DIR); + $(STRIP) $(MKDOSFS_DIR)/mkdosfs/mkdosfs; + touch -c $(MKDOSFS_DIR)/mkdosfs/mkdosfs + +$(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY): $(MKDOSFS_DIR)/$(MKDOSFS_BINARY) + cp -a $(MKDOSFS_DIR)/$(MKDOSFS_BINARY) $(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY) + touch -c $(TARGET_DIR)/sbin/mkdosfs + +mkdosfs: uclibc $(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY) + +mkdosfs-clean: + $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(MKDOSFS_DIR) uninstall + -$(MAKE) -C $(MKDOSFS_DIR) clean + +mkdosfs-dirclean: + rm -rf $(MKDOSFS_DIR) + diff --git a/make/mke2fs.mk b/make/mke2fs.mk new file mode 100644 index 000000000..38a593bc2 --- /dev/null +++ b/make/mke2fs.mk @@ -0,0 +1,69 @@ +############################################################# +# +# mke2fs +# +############################################################# +MKE2FS_SOURCE=e2fsprogs-1.27.tar.gz +MKE2FS_SITE=http://telia.dl.sourceforge.net/sourceforge/e2fsprogs +MKE2FS_DIR=$(BUILD_DIR)/e2fsprogs-1.27 +MKE2FS_CAT:=zcat +MKE2FS_BINARY:=misc/mke2fs +MKE2FS_TARGET_BINARY:=sbin/mke2fs + +$(DL_DIR)/$(MKE2FS_SOURCE): + $(WGET) -P $(DL_DIR) $(MKE2FS_SITE)/$(MKE2FS_SOURCE) + +mke2fs-source: $(DL_DIR)/$(MKE2FS_SOURCE) + +$(MKE2FS_DIR)/.unpacked: $(DL_DIR)/$(MKE2FS_SOURCE) + $(MKE2FS_CAT) $(DL_DIR)/$(MKE2FS_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(MKE2FS_DIR)/.unpacked + +$(MKE2FS_DIR)/.configured: $(MKE2FS_DIR)/.unpacked + (cd $(MKE2FS_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --with-cc=$(TARGET_CC1) \ + --with-linker=$(TARGET_CROSS)ld \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-elf-shlibs --disable-swapfs \ + --disable-debugfs --disable-imager \ + --disable-resizer --disable-fsck \ + --without-catgets --disable-nls \ + ); + touch $(MKE2FS_DIR)/.configured + +$(MKE2FS_DIR)/$(MKE2FS_BINARY): $(MKE2FS_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(MKE2FS_DIR) + $(STRIP) $(MKE2FS_DIR)/misc/mke2fs $(MKE2FS_DIR)/misc/badblocks; + touch -c $(MKE2FS_DIR)/misc/mke2fs + +$(TARGET_DIR)/$(MKE2FS_TARGET_BINARY): $(MKE2FS_DIR)/$(MKE2FS_BINARY) + #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(MKE2FS_DIR) install + #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ + # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc + # Only install a few selected items... + cp -dpf $(MKE2FS_DIR)/misc/mke2fs $(TARGET_DIR)/sbin/mke2fs; + cp -dpf $(MKE2FS_DIR)/misc/badblocks $(TARGET_DIR)/sbin/badblocks; + touch -c $(TARGET_DIR)/sbin/mke2fs + +mke2fs: uclibc $(TARGET_DIR)/$(MKE2FS_TARGET_BINARY) + +mke2fs-clean: + #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(MKE2FS_DIR) uninstall + rm -f $(TARGET_DIR)/sbin/mke2fs $(TARGET_DIR)/sbin/badblocks; + -$(MAKE) -C $(MKE2FS_DIR) clean + +mke2fs-dirclean: + rm -rf $(MKE2FS_DIR) + diff --git a/make/netkitbase.mk b/make/netkitbase.mk new file mode 100644 index 000000000..95918c81f --- /dev/null +++ b/make/netkitbase.mk @@ -0,0 +1,74 @@ +############################################################# +# +# netkitbase +# +############################################################# +NETKITBASE_SOURCE:=netkit-base-0.17.tar.gz +NETKITBASE_SITE:=ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/ +NETKITBASE_DIR:=$(BUILD_DIR)/netkit-base-0.17 +NETKITBASE_CAT:=bzcat +NETKITBASE_BINARY:=inetd/inetd +NETKITBASE_TARGET_BINARY:=usr/sbin/inetd + +$(DL_DIR)/$(NETKITBASE_SOURCE): + $(WGET) -P $(DL_DIR) $(NETKITBASE_SITE)/$(NETKITBASE_SOURCE) + +netkitbase-source: $(DL_DIR)/$(NETKITBASE_SOURCE) + +$(NETKITBASE_DIR)/.unpacked: $(DL_DIR)/$(NETKITBASE_SOURCE) + $(NETKITBASE_CAT) $(DL_DIR)/$(NETKITBASE_SOURCE) | tar -C $(BUILD_DIR) -xvf - + # use ANSI syntax + perl -i -p -e "s/main\(\)/main(void)/;" $(NETKITBASE_DIR)/configure + # don't try to run cross compiled binaries while configuring things + perl -i -p -e "s~./__conftest~#./__conftest~;" $(NETKITBASE_DIR)/configure + touch $(NETKITBASE_DIR)/.unpacked + +$(NETKITBASE_DIR)/.configured: $(NETKITBASE_DIR)/.unpacked + (cd $(NETKITBASE_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + --installroot=$(TARGET_DIR) \ + --with-c-compiler=$(TARGET_CC) \ + ); + touch $(NETKITBASE_DIR)/.configured + +$(NETKITBASE_DIR)/$(NETKITBASE_BINARY): $(NETKITBASE_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(NETKITBASE_DIR) + $(STRIP) $(NETKITBASE_DIR)/$(NETKITBASE_BINARY) + +$(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY): $(NETKITBASE_DIR)/$(NETKITBASE_BINARY) + # Only install a few selected items... + mkdir -p $(TARGET_DIR)/usr/sbin + cp $(NETKITBASE_DIR)/$(NETKITBASE_BINARY) $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY) + #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(NETKITBASE_DIR) install + #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ + # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc + +$(TARGET_DIR)/etc/inetd.conf: $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY) + mkdir -p $(TARGET_DIR)/etc + cp $(NETKITBASE_DIR)/etc.sample/inetd.conf $(TARGET_DIR)/etc/ + perl -i -p -e "s/^([a-z])/#\1/;" $(TARGET_DIR)/etc/inetd.conf + +netkitbase: uclibc $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY) $(TARGET_DIR)/etc/inetd.conf + +netkitbase-clean: + #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(NETKITBASE_DIR) uninstall + -rm -f $(TARGET_DIR)/usr/sbin/inetd $(TARGET_DIR)/etc/inetd.conf + -rm -f $(TARGET_DIR)/etc/inetd.conf + -$(MAKE) -C $(NETKITBASE_DIR) clean + +netkitbase-dirclean: + rm -rf $(NETKITBASE_DIR) + diff --git a/make/netkittelnet.mk b/make/netkittelnet.mk new file mode 100644 index 000000000..399aaa81f --- /dev/null +++ b/make/netkittelnet.mk @@ -0,0 +1,73 @@ +############################################################# +# +# netkittelnet +# +############################################################# +NETKITTELNET_SOURCE:=netkit-telnet-0.17.tar.gz +NETKITTELNET_SITE:=ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/ +NETKITTELNET_DIR:=$(BUILD_DIR)/netkit-telnet-0.17 +NETKITTELNET_CAT:=bzcat +NETKITTELNET_BINARY:=telnetd/telnetd +NETKITTELNET_TARGET_BINARY:=usr/sbin/telnetd +NETKITTELNET_PATCH:=$(SOURCE_DIR)/netkittelnet.patch + +$(DL_DIR)/$(NETKITTELNET_SOURCE): + $(WGET) -P $(DL_DIR) $(NETKITTELNET_SITE)/$(NETKITTELNET_SOURCE) + +netkittelnet-source: $(DL_DIR)/$(NETKITTELNET_SOURCE) + +$(NETKITTELNET_DIR)/.unpacked: $(DL_DIR)/$(NETKITTELNET_SOURCE) + $(NETKITTELNET_CAT) $(DL_DIR)/$(NETKITTELNET_SOURCE) | tar -C $(BUILD_DIR) -xvf - + # use ANSI syntax + perl -i -p -e "s/main\(\)/main(void)/;" $(NETKITTELNET_DIR)/configure + # Disable termcap support + perl -i -p -e "s~(.*termcap\.h.*)~/* \1 */~;" $(NETKITTELNET_DIR)/telnetd/telnetd.c + # don't try to run cross compiled binaries while configuring things + cat $(NETKITTELNET_PATCH) | patch -p1 -d $(NETKITTELNET_DIR) + touch $(NETKITTELNET_DIR)/.unpacked + +$(NETKITTELNET_DIR)/.configured: $(NETKITTELNET_DIR)/.unpacked + (cd $(NETKITTELNET_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + --installroot=$(TARGET_DIR) \ + --with-c-compiler=$(TARGET_CC) \ + ); + touch $(NETKITTELNET_DIR)/.configured + +$(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY): $(NETKITTELNET_DIR)/.configured + $(MAKE) SUB=telnetd CC=$(TARGET_CC1) -C $(NETKITTELNET_DIR) + $(STRIP) $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY) + +$(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY): $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY) + # Only install a few selected items... + mkdir -p $(TARGET_DIR)/usr/sbin + cp $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY) $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY) + # Enable telnet in inetd + perl -i -p -e "s~^#telnet.*~telnet\tstream\ttcp\tnowait\troot\t/usr/sbin/telnetd\t/usr/sbin/telnetd~;" $(TARGET_DIR)/etc/inetd.conf + #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(NETKITTELNET_DIR) install + #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ + # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc + +netkittelnet: uclibc $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY) + +netkittelnet-clean: + #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(NETKITTELNET_DIR) uninstall + -rm -f $(TARGET_DIR)/usr/sbin/telnetd + -$(MAKE) -C $(NETKITTELNET_DIR) clean + +netkittelnet-dirclean: + rm -rf $(NETKITTELNET_DIR) + diff --git a/make/ntp.mk b/make/ntp.mk new file mode 100644 index 000000000..f7bda2cc2 --- /dev/null +++ b/make/ntp.mk @@ -0,0 +1,61 @@ +############################################################# +# +# ntp +# +############################################################# +NTP_SOURCE:=ntp-4.1.1.tar.gz +NTP_SITE:=http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4 +NTP_DIR:=$(BUILD_DIR)/ntp-4.1.1 +NTP_CAT:=bzcat +NTP_BINARY:=ntpdate/ntpdate +NTP_TARGET_BINARY:=bin/ntpdate + + +$(DL_DIR)/$(NTP_SOURCE): + $(WGET) -P $(DL_DIR) $(NTP_SITE)/$(NTP_SOURCE) + +ntp-source: $(DL_DIR)/$(NTP_SOURCE) + +$(NTP_DIR)/.unpacked: $(DL_DIR)/$(NTP_SOURCE) + $(NTP_CAT) $(DL_DIR)/$(NTP_SOURCE) | tar -C $(BUILD_DIR) -xvf - + perl -i -p -e "s,^#if.*__GLIBC__.*_BSD_SOURCE.*$$,#if 0," \ + $(NTP_DIR)/ntpd/refclock_pcf.c; + touch $(NTP_DIR)/.unpacked + +$(NTP_DIR)/.configured: $(NTP_DIR)/.unpacked + (cd $(NTP_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + --with-shared \ + ); + touch $(NTP_DIR)/.configured + +$(NTP_DIR)/$(NTP_BINARY): $(NTP_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(NTP_DIR) + +$(TARGET_DIR)/$(NTP_TARGET_BINARY): $(NTP_DIR)/$(NTP_BINARY) + $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(NTP_DIR) install + rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ + $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc + +ntp: uclibc $(TARGET_DIR)/$(NTP_TARGET_BINARY) + +ntp-clean: + $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(NTP_DIR) uninstall + -$(MAKE) -C $(NTP_DIR) clean + +ntp-dirclean: + rm -rf $(NTP_DIR) + diff --git a/make/pciutils.mk b/make/pciutils.mk new file mode 100644 index 000000000..4d60ed8b3 --- /dev/null +++ b/make/pciutils.mk @@ -0,0 +1,69 @@ +############################################################# +# +# pciutils +# +############################################################# +PCIUTILS_SOURCE:=pciutils-2.1.10.tar.gz +PCIUTILS_SITE:=ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci +PCIUTILS_DIR:=$(BUILD_DIR)/pciutils-2.1.10 +PCIUTILS_CAT:=zcat + +# Yet more targets... +PCIIDS_SITE:=http://pciids.sourceforge.net/ +PCIIDS_SOURCE:=pci.ids.bz2 +PCIIDS_CAT:=bzcat + +$(DL_DIR)/$(PCIUTILS_SOURCE): + $(WGET) -P $(DL_DIR) $(PCIUTILS_SITE)/$(PCIUTILS_SOURCE) + +$(DL_DIR)/$(PCIIDS_SOURCE): + $(WGET) -P $(DL_DIR) $(PCIIDS_SITE)/$(PCIIDS_SOURCE) + +pciutils-source: $(DL_DIR)/$(PCIUTILS_SOURCE) $(DL_DIR)/$(PCIIDS_SOURCE) + +$(PCIUTILS_DIR)/.unpacked: $(DL_DIR)/$(PCIUTILS_SOURCE) $(DL_DIR)/$(PCIIDS_SOURCE) + $(PCIUTILS_CAT) $(DL_DIR)/$(PCIUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf - + $(PCIIDS_CAT) $(DL_DIR)/$(PCIIDS_SOURCE) > $(PCIUTILS_DIR)/pci.id + touch $(PCIUTILS_DIR)/.unpacked + +$(PCIUTILS_DIR)/.configured: $(PCIUTILS_DIR)/.unpacked + (cd $(PCIUTILS_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + ); + touch $(PCIUTILS_DIR)/.configured + +$(PCIUTILS_DIR)/lspci: $(PCIUTILS_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(PCIUTILS_DIR) + +$(TARGET_DIR)/sbin/lspci: $(PCIUTILS_DIR)/lspci + install -c $(PCIUTILS_DIR)/lspci $(TARGET_DIR)/sbin/lspci + +$(TARGET_DIR)/sbin/setpci: $(PCIUTILS_DIR)/setpci + install -c $(PCIUTILS_DIR)/setpci $(TARGET_DIR)/sbin/setpci + +$(TARGET_DIR)/usr/share/misc/pci.ids: $(PCIUTILS_DIR)/.dist + install -Dc $(PCIUTILS_DIR)/pci.ids $(TARGET_DIR)/usr/share/misc/pci.ids + + +pciutils: uclibc $(TARGET_DIR)/sbin/setpci $(TARGET_DIR)/sbin/lspci $(TARGET_DIR)/usr/share/misc/pci.ids + +pciutils-clean: + $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(PCIUTILS_DIR) uninstall + -$(MAKE) -C $(PCIUTILS_DIR) clean + +pciutils-dirclean: + rm -rf $(PCIUTILS_DIR) + diff --git a/make/pcmcia.mk b/make/pcmcia.mk new file mode 100644 index 000000000..88368a788 --- /dev/null +++ b/make/pcmcia.mk @@ -0,0 +1,92 @@ +############################################################# +# +# pcmcia card services +# +############################################################# +# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org> +# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA + +PCMCIA_SOURCE:=pcmcia-cs-3.2.3.tar.gz +PCMCIA_SITE:=http://telia.dl.sourceforge.net/sourceforge/pcmcia-cs +PCMCIA_DIR:=$(BUILD_DIR)/pcmcia-cs-3.2.3 +PCMCIA_PATCH:=$(SOURCE_DIR)/pcmcia.patch +PCMCIA_CAT:=zcat + +$(DL_DIR)/$(PCMCIA_SOURCE): + $(WGET) -P $(DL_DIR) $(PCMCIA_SITE)/$(PCMCIA_SOURCE) + +pcmcia-source: $(DL_DIR)/$(PCMCIA_SOURCE) + +$(PCMCIA_DIR)/.unpacked: $(DL_DIR)/$(PCMCIA_SOURCE) + $(PCMCIA_CAT) $(DL_DIR)/$(PCMCIA_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(PCMCIA_DIR)/.unpacked + +$(PCMCIA_DIR)/.patched: $(PCMCIA_DIR)/.unpacked + cat $(PCMCIA_PATCH) | patch -d $(PCMCIA_DIR) -p1 + touch $(PCMCIA_DIR)/.patched + +$(PCMCIA_DIR)/.configured: $(PCMCIA_DIR)/.patched + ( cd $(PCMCIA_DIR) ; ./Configure --kernel=$(LINUX_DIR) --noprompt \ + --rcdir=/etc --arch=$(ARCH) --trust --srctree --nocardbus \ + --sysv --kcc=$(HOSTCC) --ucc=$(TARGET_CC1) --ld=$(TARGET_CROSS)ld \ + --target=$(TARGET_DIR)) + touch $(PCMCIA_DIR)/.configured + +$(PCMCIA_DIR)/cardmgr/cardmgr: $(PCMCIA_DIR)/.configured + $(MAKE) -C $(PCMCIA_DIR) -i all + -A=`find $(PCMCIA_DIR) -type f -perm +111` ; \ + for fo in $$A; do \ + file $$fo | grep "ELF" | grep "executable" > /dev/null 2>&1; \ + if [ $$? = 0 ] ; then \ + $(STRIP) $$fo; \ + fi; \ + done + touch -c $(PCMCIA_DIR)/cardmgr/cardmgr + +$(TARGET_DIR)/sbin/cardmgr: $(PCMCIA_DIR)/cardmgr/cardmgr + rm -rf $(TARGET_DIR)/etc/pcmcia; + $(MAKE) -i -C $(PCMCIA_DIR) install + perl -i -p -e "s/pump/udhcpc/" $(TARGET_DIR)/etc/pcmcia/network + perl -i -p -e "s/ide_cs/ide-cs/" $(TARGET_DIR)/etc/pcmcia/config + perl -i -p -e "s/bind \"wvlan_cs\"/bind \"orinoco_cs\"/g" $(TARGET_DIR)/etc/pcmcia/config + perl -i -p -e "s,/var/lib/pcmcia/scheme,/etc/pcmcia/scheme," $(TARGET_DIR)/etc/pcmcia/shared + perl -i -p -e "s,/var/run/pcmcia-scheme,/etc/pcmcia/pcmcia-scheme," $(TARGET_DIR)/etc/pcmcia/shared + #perl -i -p -e "s/port 0x800-0x8ff, //" $(TARGET_DIR)/etc/pcmcia/config.opts ; + echo "default" > $(TARGET_DIR)/etc/pcmcia/scheme; + rm -rf $(TARGET_DIR)/usr/man; + rm -rf $(TARGET_DIR)/usr/share/man; + rm -rf $(TARGET_DIR)/usr/X11R6/man; + rm -rf $(TARGET_DIR)/etc/rc.d; + rm -rf $(TARGET_DIR)/etc/rc?.d; + rm -f $(TARGET_DIR)/etc/init.d/pcmcia.N; + rm -f $(TARGET_DIR)/sbin/dump_cis $(TARGET_DIR)/sbin/pack_cis + rm -f $(TARGET_DIR)/usr/share/pnp.ids $(TARGET_DIR)/sbin/lspnp $(TARGET_DIR)/sbin/setpnp; + rm -f $(TARGET_DIR)/sbin/pcinitrd + rm -f $(TARGET_DIR)/sbin/probe + cp $(SOURCE_DIR)/target_skeleton/etc/init.d/pcmcia $(TARGET_DIR)/etc/init.d/pcmcia + chmod -R u+w $(TARGET_DIR)/etc/pcmcia/* + +pcmcia: uclibc $(TARGET_DIR)/sbin/cardmgr + +pcmcia-clean: + rm -f $(TARGET_DIR)/sbin/cardmgr + -$(MAKE) -C $(PCMCIA_DIR) clean + rm -f $(PCMCIA_DIR)/.configured $(PCMCIA_DIR)/config.out + +pcmcia-dirclean: + rm -rf $(PCMCIA_DIR) diff --git a/make/pppd.mk b/make/pppd.mk new file mode 100644 index 000000000..89eba4501 --- /dev/null +++ b/make/pppd.mk @@ -0,0 +1,66 @@ +############################################################# +# +# pppd +# +############################################################# +PPPD_SOURCE:=ppp-2.4.1b2.tar.gz +PPPD_SITE:=ftp://ftp.samba.org/pub/ppp +PPPD_DIR:=$(BUILD_DIR)/ppp-2.4.1b2 +PPPD_CAT:=zcat +PPPD_BINARY:=pppd/pppd +PPPD_TARGET_BINARY:=usr/sbin/pppd + + +$(DL_DIR)/$(PPPD_SOURCE): + $(WGET) -P $(DL_DIR) $(PPPD_SITE)/$(PPPD_SOURCE) + +pppd-source: $(DL_DIR)/$(PPPD_SOURCE) + +$(PPPD_DIR)/.unpacked: $(DL_DIR)/$(PPPD_SOURCE) + $(PPPD_CAT) $(DL_DIR)/$(PPPD_SOURCE) | tar -C $(BUILD_DIR) -xvf - + perl -i -p -e 's/ -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP//' $(PPPD_DIR)/pppd/Makefile.linux + perl -i -p -e 's/$(INSTALL) -s/$(INSTALL)/' $(PPPD_DIR)/*/Makefile.linux + perl -i -p -e 's/ -o root//' $(PPPD_DIR)/*/Makefile.linux + perl -i -p -e 's/ -g daemon//' $(PPPD_DIR)/*/Makefile.linux + touch $(PPPD_DIR)/.unpacked + +$(PPPD_DIR)/.configured: $(PPPD_DIR)/.unpacked + (cd $(PPPD_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + ); + touch $(PPPD_DIR)/.configured + +$(PPPD_DIR)/$(PPPD_BINARY): $(PPPD_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(PPPD_DIR) + +$(TARGET_DIR)/$(PPPD_TARGET_BINARY): $(PPPD_DIR)/$(PPPD_BINARY) + $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(PPPD_DIR) install + rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ + $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc + +pppd: uclibc $(TARGET_DIR)/$(PPPD_TARGET_BINARY) + +pppd-clean: + rm -f $(TARGET_DIR)/usr/sbin/pppd + rm -f $(TARGET_DIR)/usr/sbin/chat + rm -rf $(TARGET_DIR)/etc/ppp + $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC1) -C $(PPPD_DIR) uninstall + -$(MAKE) -C $(PPPD_DIR) clean + +pppd-dirclean: + rm -rf $(PPPD_DIR) + + diff --git a/make/rxvt.mk b/make/rxvt.mk new file mode 100644 index 000000000..3da4beeb2 --- /dev/null +++ b/make/rxvt.mk @@ -0,0 +1,68 @@ +############################################################# +# +# rxvt +# +############################################################# +# Copyright (C) 2002 by Tom Walsh <Tom@OpenHardware.net> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA + +RXVT_SOURCE:=rxvt-2.6.4.tar.bz2 +RXVT_PATCH:=$(SOURCE_DIR)/rxvt-2.6.4.patch +RXVT_SITE:=ftp://ftp.rxvt.org/pub/rxvt/ +RXVT_CAT:=bzcat +RXVT_DIR:=$(BUILD_DIR)/rxvt-2.6.4 +RXVT_BINARY:=$(RXVT_DIR)/src/rxvt + +$(DL_DIR)/$(RXVT_SOURCE): + $(WGET) -P $(DL_DIR) $(RXVT_SITE)/$(RXVT_SOURCE) + +rxvt-source: $(DL_DIR)/$(RXVT_SOURCE) + +$(RXVT_DIR)/.unpacked: $(DL_DIR)/$(RXVT_SOURCE) + $(RXVT_CAT) $(DL_DIR)/$(RXVT_SOURCE) | tar -C $(BUILD_DIR) -xvf - + touch $(RXVT_DIR)/.unpacked + +$(RXVT_DIR)/.configured: $(RXVT_DIR)/.unpacked + (cd $(RXVT_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr/X11R6 \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --x-includes=$(TINYX_DIR)/exports/include \ + --x-libraries=$(TINYX_DIR)/exports/lib \ + ); + cat $(RXVT_PATCH) | patch -d $(RXVT_DIR) -p1 + touch $(RXVT_DIR)/.configured + +$(RXVT_BINARY): $(RXVT_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(RXVT_DIR) + $(STRIP) -x $(RXVT_BINARY) + +$(TARGET_DIR)/usr/X11R6/bin/rxvt: $(RXVT_BINARY) + cp -f $(RXVT_BINARY) $(TARGET_DIR)/usr/X11R6/bin + +rxvt: tinyx $(TARGET_DIR)/usr/X11R6/bin/rxvt + +rxvt-clean: + rm -f $(TARGET_DIR)/usr/X11R6/bin/rxvt + -$(MAKE) -C $(RXVT_DIR) clean + +rxvt-dirclean: + rm -rf $(RXVT_DIR) + diff --git a/make/sfdisk.mk b/make/sfdisk.mk new file mode 100644 index 000000000..cd71dc693 --- /dev/null +++ b/make/sfdisk.mk @@ -0,0 +1,34 @@ +############################################################# +# +# sfdisk support +# +############################################################# +SFDISK_SOURCE=sfdisk.tar.bz2 +SFDISK_SITE:=ftp://busybox.net/ +SFDISK_DIR=$(BUILD_DIR)/sfdisk + + +$(DL_DIR)/$(SFDISK_SOURCE): + $(WGET) -P $(DL_DIR) $(SFDISK_SITE)/$(SFDISK_SOURCE) + +$(SFDISK_DIR): $(DL_DIR)/$(SFDISK_SOURCE) + bzcat $(DL_DIR)/$(SFDISK_SOURCE) | tar -C $(BUILD_DIR) -xvf - + +$(SFDISK_DIR)/sfdisk: $(SFDISK_DIR) + $(MAKE) CROSS=$(TARGET_CROSS) DEBUG=false -C $(SFDISK_DIR); + -$(STRIP) $(SFDISK_DIR)/sfdisk; + touch -c $(SFDISK_DIR)/sfdisk + +$(TARGET_DIR)/sbin/sfdisk: $(SFDISK_DIR)/sfdisk + cp $(SFDISK_DIR)/sfdisk $(TARGET_DIR)/sbin/sfdisk; + touch -c $(TARGET_DIR)/sbin/sfdisk + +sfdisk: uclibc $(TARGET_DIR)/sbin/sfdisk + +sfdisk-clean: + rm -f $(TARGET_DIR)/sbin/sfdisk + -$(MAKE) -C $(SFDISK_DIR) clean + +sfdisk-dirclean: + rm -rf $(SFDISK_DIR) + diff --git a/make/tinyx.mk b/make/tinyx.mk new file mode 100644 index 000000000..372ce8487 --- /dev/null +++ b/make/tinyx.mk @@ -0,0 +1,125 @@ +############################################################# +# +# tinyx - a small footprint X-server for the TuxScreen +# +############################################################# +# Copyright (C) 2002 by Tom Walsh <Tom@OpenHardware.net> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU Library General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA +# +############################################################# +# You may want to change these. +############################################################# + +TINYX_APPS:=xlsfonts/xlsfonts xmodmap/xmodmap +#xset/xset xdpyinfo/xdpyinfo xsetroot/xsetroot \ +# xrdb/xrdb xrandr/xrandr \ +# xhost/xhost xauth/xauth oclock/oclock xeyes/xeyes +# + +TINYX_LIBS:=ICE X11 Xext Xpm +# Xaw SM Xt Xmu + +############################################################# +# Stuff below this line shouldn't need changes. +# if you do change, look in rxvt & matchbox for the impact! +############################################################# +# +# Where resources are found. +# +TINYX_DIR:=$(BUILD_DIR)/xc-011010 +TINYX_LDIR:=$(TINYX_DIR)/lib +TINYX_PROGS:=$(TINYX_DIR)/programs +TINYX_PATCH:=$(SOURCE_DIR)/tinyx-011010.patch +TINYX_SOURCE:=xc-011010.tar.bz2 +TINYX_SITE:= http://intimate.handhelds.org/jacques/ +TINYX_CF:=$(TINYX_DIR)/config/cf +# +# Some things that you may want to change. +# +TINYX_XFBDEV:=$(TINYX_DIR)/programs/Xserver/Xfbdev +TINYX_CAT:=bzcat +TINYX_BINX:=$(TARGET_DIR)/usr/X11R6/bin/ +TINYX_LIBX:=$(TARGET_DIR)/usr/lib/ + +# +# These rules fetch various tinyx source files. +# +$(DL_DIR)/$(TINYX_SOURCE): + $(WGET) -P $(DL_DIR) $(TINYX_SITE)/$(TINYX_SOURCE) + +$(DL_DIR)/cross.def: + $(WGET) -P $(DL_DIR) $(TINYX_SITE)/xcompile/tuxscreen/cross.def + +$(DL_DIR)/host.def: + $(WGET) -P $(DL_DIR) $(TINYX_SITE)/xcompile/tuxscreen/host.def + +# +# rule to make sure that we have the source, and it is configured. +# +$(TINYX_DIR)/.configure: $(DL_DIR)/$(TINYX_SOURCE) $(DL_DIR)/cross.def $(DL_DIR)/host.def + $(TINYX_CAT) $(DL_DIR)/$(TINYX_SOURCE) | tar -C $(BUILD_DIR) -xvf - + cat $(TINYX_PATCH) | patch -d $(TINYX_DIR) -p1 + cp $(DL_DIR)/host.def $(TINYX_CF)/host.def + cp $(DL_DIR)/cross.def $(TINYX_CF)/cross.def + perl -i -p -e 's:REPLACE_STAGING_DIR:$(STAGING_DIR):g' \ + $(TINYX_CF)/cross.def \ + $(TINYX_LDIR)/X11/Xlib.h + touch $(TINYX_DIR)/.configure + +# +# Now that we have the source, build it... +# +$(TINYX_XFBDEV): $(TINYX_DIR)/.configure + rm -f $(TINYX_BINX)/Xfbdev + ( cd $(TINYX_DIR) ; $(MAKE) World ; cd $(BUILDROOT) ) + +# +# Once Frame Buffer is built, we install executables. +# +$(TINYX_BINX)/Xfbdev: $(TINYX_XFBDEV) + -mkdir $(TARGET_DIR)/usr/X11R6 + -mkdir $(TINYX_BINX) + for file in $(TINYX_APPS) ; do \ + cp -f $(TINYX_DIR)/programs/$$file $(TINYX_BINX) ; \ + $(STRIP) $(TINYX_PROGS)/$$file ; \ + done + cp $(TINYX_DIR)/programs/Xserver/Xfbdev $(TINYX_BINX) + $(STRIP) $(TINYX_BINX)/Xfbdev + cp -f $(TINYX_DIR)/startx $(TARGET_DIR)/bin + chmod a+x $(TARGET_DIR)/bin/startx + +# +# After we have executables installed, install the libraries. +# +$(TINYX_LIBX)/libX11.so.6.2: $(TINYX_XFBDEV) + for dirs in $(TINYX_LIBS) ; do \ + file=`find $(TINYX_LDIR)/$$dirs -type f -iname "lib$$dirs.so*"` ; \ + $(STRIP) --strip-unneeded $$file ; \ + cp -f $$file $(TINYX_LIBX) ; \ + file=`find $(TINYX_LDIR)/$$dirs -type l -iname "lib$$dirs.so*"` ; \ + cp -pRf $$file $(TINYX_LIBX) ; \ + done + +tinyx: zlib $(TINYX_LIBX)/libX11.so.6.2 $(TINYX_BINX)/Xfbdev + +tinyx-clean: + -rm -rf $(TARGET_DIR)/usr/X11R6 + -$(MAKE) -C $(TINYX_DIR) clean + +tinyx-dirclean: + -rm -rf $(TINYX_DIR) + -rm -rf $(TARGET_DIR)/usr/X11R6 diff --git a/make/tn5250.mk b/make/tn5250.mk new file mode 100644 index 000000000..b02ded7e2 --- /dev/null +++ b/make/tn5250.mk @@ -0,0 +1,47 @@ +TN5250_SITE:=http://telia.dl.sourceforge.net/sourceforge/tn5250 +TN5250_DIR:=$(BUILD_DIR)/tn5250-0.16.4 +TN5250_SOURCE:=tn5250-0.16.4.tar.gz + +$(DL_DIR)/$(TN5250_SOURCE): + $(WGET) -P $(DL_DIR) $(TN5250_SITE)/$(TN5250_SOURCE) + +$(TN5250_DIR)/.dist: $(DL_DIR)/$(TN5250_SOURCE) + gunzip -c $(DL_DIR)/$(TN5250_SOURCE) | tar -C $(BUILD_DIR) -xvf - + -touch $(TN5250_DIR)/.dist + +$(TN5250_DIR)/.configured: $(TN5250_DIR)/.dist + (cd $(TN5250_DIR); rm -rf config.cache; \ + PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC1) \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --sbindir=/usr/sbin \ + --libexecdir=/usr/lib \ + --sysconfdir=/etc \ + --datadir=/usr/share \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --disable-nls \ + --with-slang --without-x --without-ssl \ + ); + touch $(TN5250_DIR)/.configured + +$(TN5250_DIR)/tn5250: $(TN5250_DIR)/.configured + $(MAKE) CC=$(TARGET_CC1) -C $(TN5250_DIR) + +$(TARGET_DIR)/usr/bin/tn5250: $(TN5250_DIR)/tn5250 + install -c $(TN5250_DIR)/tn5250 $(TARGET_DIR)/usr/bin/tn5250 + +tn5250: uclibc slang $(TARGET_DIR)/usr/bin/tn5250 + +tn5250-clean: + $(MAKE) -C $(TN5250_DIR) clean + +tn5250-dirclean: + rm -rf $(TN5250_DIR) + + + |