1 files changed, 378 insertions, 0 deletions
diff --git a/boot/u-boot/Config.in b/boot/u-boot/Config.in
new file mode 100644
index 000000000..ca47e18f9
--- /dev/null
+++ b/boot/u-boot/Config.in
@@ -0,0 +1,378 @@
+menuconfig BR2_TARGET_UBOOT
+	bool "Das U-Boot Boot Monitor"
+	help
+	  Build "Das U-Boot" Boot Monitor
+
+if BR2_TARGET_UBOOT
+config BR2_TARGET_UBOOT_BOARDNAME
+	string "board name"
+	default "$(BOARD_NAME)"
+	help
+	  One of U-Boot supported boards to be built.
+	  This will be suffixed with _config to meet U-Boot standard naming.
+
+choice
+	prompt "U-Boot Version"
+	default BR2_TARGET_UBOOT_2010_03
+	help
+	  Select the specific U-Boot version you want to use
+
+config BR2_TARGET_UBOOT_2010_03
+	bool "u-boot-2010.03"
+
+config BR2_TARGET_UBOOT_2009_11
+	bool "u-boot-2009.11"
+
+config BR2_TARGET_UBOOT_2009_08
+	bool "u-boot-2009.08"
+
+config BR2_TARGET_UBOOT_2009_06
+	bool "u-boot-2009.06"
+	depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2009_03
+	bool "u-boot-2009.03"
+	depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2009_01
+	bool "u-boot-2009.01"
+	depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2008_10
+	bool "u-boot-2008.10"
+	depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_1_2_0_ATMEL
+	bool "u-boot-1.2.0-atmel"
+	depends on BR2_TARGET_AT91
+
+endchoice
+
+config BR2_UBOOT_VERSION
+	string
+	default "2010.03"	if BR2_TARGET_UBOOT_2010_03
+	default "2009.11"	if BR2_TARGET_UBOOT_2009_11
+	default "2009.08"	if BR2_TARGET_UBOOT_2009_08
+	default "2009.06"	if BR2_TARGET_UBOOT_2009_06
+	default "2009.03"	if BR2_TARGET_UBOOT_2009_03
+	default "2009.01"	if BR2_TARGET_UBOOT_2009_01
+	default "2008.10"	if BR2_TARGET_UBOOT_2008_10
+	default "1.2.0-atmel"	if BR2_TARGET_UBOOT_1_2_0_ATMEL
+
+config BR2_U_BOOT_SITE
+	string
+	default "$(BR2_ATMEL_MIRROR)"		if BR2_TARGET_UBOOT_1_2_0_ATMEL
+	default "ftp://ftp.denx.de/pub/u-boot"
+
+source "target/device/Config.in.u-boot"
+
+config BR2_TARGET_UBOOT_CUSTOM_PATCH
+	string "custom patch"
+	help
+	  If your board requires a custom patch, add the path to the file here.
+	  Most users may leave this empty
+
+choice
+	prompt "Bootsource"
+	depends on BR2_BOOTSOURCE
+	default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+
+	config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+	bool "Boot from dataflashcard"
+	depends on BR2_BOOTSOURCE_DATAFLASHCARD
+
+	config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	bool "Boot from dataflash"
+	depends on BR2_BOOTSOURCE_DATAFLASH
+
+	config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
+	bool "Boot from a NAND flash"
+	depends on BR2_BOOTSOURCE_NANDFLASH
+
+	config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
+	bool "Boot from a parallell flash"
+	depends on BR2_BOOTSOURCE_FLASH
+
+	config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
+	bool "Boot from an SD-Card"
+	depends on BR2_BOOTSOURCE_SDCARD
+
+	config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+	bool "Boot from a serial EEPROM (Not yet supported)"
+	depends on BR2_BOOTSOURCE_EEPROM
+
+endchoice
+
+config BR2_TARGET_UBOOT_BOOTSOURCE
+	string
+	depends on BR2_BOOTSOURCE
+	default "dataflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+	default "dataflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default "nandflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
+	default "flash"		if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
+	default "sdcard"	if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
+	default "eeprom"	if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+
+config BR2_TARGET_UBOOT_SILENT
+	bool "silent console"
+	help
+	  If the option has been enabled, the output can be
+	  silenced by setting the environment variable "silent".
+
+config BR2_TARGET_UBOOT_TOOL_MKIMAGE
+	bool "mkimage tool in target"
+	help
+	  Install mkimage tool in target.
+
+config BR2_TARGET_UBOOT_TOOL_ENV
+	bool "fw_printenv tool in target"
+	help
+	  Install fw_printenv / fw_setenv tools in target.
+
+menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV
+	bool "Generate a default environment"
+	help
+	  Will generate variables for factory default command
+	  and autoscript.
+
+if BR2_TARGET_UBOOT_DEFAULT_ENV
+choice
+	prompt "SDRAM Memory size"
+	default BR2_TARGET_UBOOT_SDRAM_SIZE_64M
+	help
+	  Size of the onboard SDRAM
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
+	bool "256 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
+	bool "128 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
+	bool "64 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
+	bool "32 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
+	bool "16 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
+	bool "8 MB"
+
+endchoice
+
+config BR2_TARGET_UBOOT_MEMORY_SIZE
+	string
+	default "256M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
+	default "128M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
+	default "64M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
+	default "32M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
+	default "16M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
+	default "8M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
+
+choice
+	prompt "Kernel Size"
+	default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+	bool "Kernel size is less than 1.25 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+	bool "Kernel size is less than 1.50 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+	bool "Kernel size is less than 1.75 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+	bool "Kernel size is less than 2.00 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+	bool "Kernel size is less than 2.25 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+	bool "Kernel size is less than 2.50 MB"
+
+endchoice
+
+choice
+	prompt "Dataflash Size"
+	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
+	bool "Dataflash size is 8 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
+	bool "Dataflash size is 4 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
+	bool "Dataflash size is 2 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
+	bool "Dataflash size is 1 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
+	bool "Dataflash size is 0.5 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
+	bool "Dataflash size is 0.25 MB"
+
+endchoice
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE
+	string
+	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default "8M"	if BR2_TARGET_DATAFLASH_SIZE_8MB
+	default "4M"	if BR2_TARGET_DATAFLASH_SIZE_4MB
+	default "2M"	if BR2_TARGET_DATAFLASH_SIZE_2MB
+	default "1M"	if BR2_TARGET_DATAFLASH_SIZE_1MB
+	default "0.5M"	if BR2_TARGET_DATAFLASH_SIZE_0_50MB
+	default "0.25M"	if BR2_TARGET_DATAFLASH_SIZE_0_25MB
+
+config BR2_TARGET_UBOOT_END_OF_FLASH
+	string
+	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default "C083FFFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
+	default "C041FFFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
+	default "C020FFFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
+	default "C0107FFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
+	default "C0083FFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
+	default "C0041FFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
+	help
+
+config BR2_TARGET_UBOOT_KERNEL_START
+	string "Kernel SDRAM address"
+	default "21000000"
+	help
+	  Kernel is loaded to this address in SDRAM
+
+config BR2_TARGET_UBOOT_KERNEL_LOCATION
+	string "Kernel flash address"
+	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
+			BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default ""
+	help
+	  Kernel location in dataflash
+
+config BR2_TARGET_UBOOT_FILESYSTEM_START
+	string
+	default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+	default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+  	default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+  	default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+  	default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+  	default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+	help
+	  Kernel is loaded to this SDRAM address
+	  Assumes SDRAM starts at 20000000
+	  Will need to be updated if the SDRAM is located elsewhere
+
+config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION
+	string
+	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
+			BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+	default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+  	default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+  	default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+  	default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+  	default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+  	default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+	help
+	  Determine location for File System in Dataflash
+	  This needs to be updated for other memory technologies
+
+config BR2_TARGET_UBOOT_FILESYSTEM_SIZE
+	string "File System Size"
+	default "6000000"
+	help
+
+menuconfig BR2_TARGET_UBOOT_NETWORK
+	bool "Network Settings"
+	default y
+	help
+	  Network settings for U-boot
+
+if BR2_TARGET_UBOOT_NETWORK
+
+config BR2_TARGET_UBOOT_SERVERIP
+	string "server ip"
+	default "10.175.196.221"
+	help
+	  TFTP server ip address
+
+config BR2_TARGET_UBOOT_IPADDR
+	string "ip address"
+	default "10.175.196.18"
+	help
+	  Target ip address
+
+config BR2_TARGET_UBOOT_GATEWAY
+	string "gateway ip"
+	default "10.175.196.1"
+	help
+	  Gateway ip address
+
+config BR2_TARGET_UBOOT_NETMASK
+	string "netmask"
+	default "255.255.255.0"
+	help
+	  Network Mask
+
+config BR2_TARGET_UBOOT_ETHADDR
+	string "ethernet address"
+	default "04:25:fe:ed:00:18"
+	help
+	  Target MAC address for the ethernet interface.
+	  This should be changed for production units
+
+config BR2_TARGET_UBOOT_ETH1ADDR
+	string "ethernet 2 address"
+	help
+	  Target MAC address for the second ethernet interface.
+
+endif # BR2_TARGET_UBOOT_NETWORK
+
+endif # BR2_TARGET_UBOOT_DEFAULT_ENV
+
+endif # BR2_TARGET_UBOOT
+
+config BR2_BOOTSOURCE_DATAFLASHCARD
+	bool
+	help
+	  Allow use of a dataflashcard as a boot source
+
+config BR2_BOOTSOURCE_DATAFLASH
+	bool
+	help
+	  Allow use of a dataflash as a boot source
+
+config BR2_BOOTSOURCE_NANDFLASH
+	bool
+	help
+	  Allow use of a NAND flash as a boot source
+
+config BR2_BOOTSOURCE_FLASH
+	bool
+	help
+	  Allow use of a flash RAM as a boot source
+
+config BR2_BOOTSOURCE_SDCARD
+	bool
+	help
+	  Allow use of an SD-card as a boot source
+
+config BR2_BOOTSOURCE_EEPROM
+	bool
+	help
+	  Allow use of a serial eeprom as a boot source
+
+config	BR2_BOOTSOURCE
+	bool
+	default y if BR2_BOOTSOURCE_DATAFLASHCARD
+	default y if BR2_BOOTSOURCE_DATAFLASH
+	default y if BR2_BOOTSOURCE_NANDFLASH
+	default y if BR2_BOOTSOURCE_FLASH
+	default y if BR2_BOOTSOURCE_SDCARD
+	default y if BR2_BOOTSOURCE_EEPROM