summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--board/calao/snowball/linux-3.4.patch45
-rw-r--r--configs/calao_snowball_defconfig24
-rw-r--r--package/Config.in6
-rw-r--r--package/bluez_utils/bluez_utils-4.101-enable_cg2900_on_upstream_4.91.patch106
-rw-r--r--package/ccache/ccache.mk2
-rw-r--r--package/cpanminus/cpanminus.mk12
-rw-r--r--package/gd/Config.in62
-rw-r--r--package/gd/gd-fontconfig.patch28
-rw-r--r--package/gd/gd-maxcolors.patch20
-rw-r--r--package/gd/gd-no-zlib.patch51
-rw-r--r--package/gd/gd.mk87
-rw-r--r--package/libebml/Config.in11
-rw-r--r--package/libebml/libebml.mk26
-rw-r--r--package/libmatroska/Config.in12
-rw-r--r--package/libmatroska/libmatroska.mk27
-rw-r--r--package/libroxml/libroxml-werror.patch (renamed from package/libroxml/libroxml-2.2.0-werror.patch)6
-rw-r--r--package/libroxml/libroxml.mk2
-rw-r--r--package/multimedia/gstreamer/Config.in14
-rw-r--r--package/multimedia/gstreamer/gstreamer.mk3
-rw-r--r--package/perl/perl-configure-qemu.patch53
-rw-r--r--package/perl/perl-make-ext.patch24
-rw-r--r--package/perl/perl-mkppport.patch37
-rw-r--r--package/perl/perl.mk38
-rw-r--r--package/snowball-hdmiservice/Config.in10
-rw-r--r--package/snowball-hdmiservice/snowball-hdmiservice.mk41
-rw-r--r--package/snowball-init/Config.in14
-rw-r--r--package/snowball-init/snowball-init.mk15
-rw-r--r--package/ux500-firmware/Config.in7
-rw-r--r--package/ux500-firmware/ux500-firmware.mk22
-rw-r--r--toolchain/toolchain-external/Config.in26
-rw-r--r--toolchain/toolchain-external/ext-tool.mk6
31 files changed, 674 insertions, 163 deletions
diff --git a/board/calao/snowball/linux-3.4.patch b/board/calao/snowball/linux-3.4.patch
new file mode 100644
index 000000000..4e6fb518f
--- /dev/null
+++ b/board/calao/snowball/linux-3.4.patch
@@ -0,0 +1,45 @@
+From 3d1a9b44b9dcd2c0f5d54c09596c96c0524d8340 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 13 Nov 2012 11:47:41 +0100
+Subject: [PATCH] trace-debug[stm]: Fix for BT/WLAN instability
+
+Pins under mop500_ske_pins array are used for different
+functionalities in snowball. Ex: GPIO161 pin configured
+for keypad here must stay configured as GPIO alternate
+function for operating PMU_EN pin of BT/WLAN chip in snowball.
+So forbid configuring these pins, for snowball
+
+Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-ux500/board-mop500-stm.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
+index 1bef2a0..532fb9e 100644
+--- a/arch/arm/mach-ux500/board-mop500-stm.c
++++ b/arch/arm/mach-ux500/board-mop500-stm.c
+@@ -121,7 +121,9 @@ static int stm_ste_disable_ape_on_mipi60(void)
+ if (retval)
+ STM_ERR("Failed to disable MIPI60\n");
+ else {
+- retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
++ if (!machine_is_snowball())
++ retval = nmk_config_pins(
++ ARRAY_AND_SIZE(mop500_ske_pins));
+ if (retval)
+ STM_ERR("Failed to enable SKE gpio\n");
+ }
+@@ -314,7 +316,8 @@ static int stm_ste_connection(enum stm_connection_type con_type)
+ /* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
+ prcmu_enable_stm_mod_uart();
+ /* Enable APE on MIPI60 */
+- retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
++ if (!machine_is_snowball())
++ retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
+ if (retval)
+ STM_ERR("Failed to disable SKE GPIO\n");
+ else {
+--
+1.7.9.5
+
diff --git a/configs/calao_snowball_defconfig b/configs/calao_snowball_defconfig
new file mode 100644
index 000000000..360ed5129
--- /dev/null
+++ b/configs/calao_snowball_defconfig
@@ -0,0 +1,24 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_GCC_VERSION_4_7_X=y
+# BR2_SOFT_FLOAT is not set
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_VFP_FLOAT=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_SNOWBALL_HDMISERVICE=y
+BR2_PACKAGE_LIBNL=y
+BR2_PACKAGE_SNOWBALL_INIT=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_TARGET_ROOTFS_TAR_GZIP=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="snowball"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4"
+BR2_LINUX_KERNEL_PATCH="board/calao/snowball/"
+BR2_LINUX_KERNEL_DEFCONFIG="u8500"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/package/Config.in b/package/Config.in
index 15d7ad66f..5ba1f0536 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -250,6 +250,7 @@ source "package/sane-backends/Config.in"
source "package/sdparm/Config.in"
source "package/setserial/Config.in"
source "package/smartmontools/Config.in"
+source "package/snowball-hdmiservice/Config.in"
source "package/sredird/Config.in"
source "package/statserial/Config.in"
source "package/sysstat/Config.in"
@@ -260,6 +261,7 @@ source "package/usb_modeswitch/Config.in"
source "package/usb_modeswitch_data/Config.in"
source "package/usbmount/Config.in"
source "package/usbutils/Config.in"
+source "package/ux500-firmware/Config.in"
source "package/wipe/Config.in"
endmenu
@@ -376,6 +378,7 @@ source "package/cairo/Config.in"
source "package/fltk/Config.in"
source "package/fontconfig/Config.in"
source "package/freetype/Config.in"
+source "package/gd/Config.in"
source "package/giblib/Config.in"
source "package/gtk2-engines/Config.in"
source "package/gtk2-themes/Config.in"
@@ -434,6 +437,8 @@ endmenu
menu "Multimedia"
source "package/libdvdread/Config.in"
source "package/libdvdnav/Config.in"
+source "package/libebml/Config.in"
+source "package/libmatroska/Config.in"
source "package/libmms/Config.in"
source "package/libmpeg2/Config.in"
source "package/libogg/Config.in"
@@ -549,6 +554,7 @@ source "package/empty/Config.in"
source "package/googlefontdirectory/Config.in"
source "package/mobile-broadband-provider-info/Config.in"
source "package/shared-mime-info/Config.in"
+source "package/snowball-init/Config.in"
source "package/sound-theme-borealis/Config.in"
source "package/sound-theme-freedesktop/Config.in"
endmenu
diff --git a/package/bluez_utils/bluez_utils-4.101-enable_cg2900_on_upstream_4.91.patch b/package/bluez_utils/bluez_utils-4.101-enable_cg2900_on_upstream_4.91.patch
new file mode 100644
index 000000000..e80af5fd9
--- /dev/null
+++ b/package/bluez_utils/bluez_utils-4.101-enable_cg2900_on_upstream_4.91.patch
@@ -0,0 +1,106 @@
+From ac7992081abba87627c9e91735b3309584b48585 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Wed, 14 Nov 2012 14:27:02 +0100
+Subject: [PATCH] add support for the ST-Ericsson CG2900 GPS FM Bluetooth
+ combo controller
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ tools/hciattach.c | 22 +++++++++++++++-------
+ tools/hciattach.h | 1 +
+ 2 files changed, 16 insertions(+), 7 deletions(-)
+
+diff --git a/tools/hciattach.c b/tools/hciattach.c
+index e4d5aa1..7f08243 100644
+--- a/tools/hciattach.c
++++ b/tools/hciattach.c
+@@ -1066,6 +1066,11 @@ struct uart_t uart[] = {
+ { "texasalt", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, texasalt, NULL },
+
++ /* ST-Ericsson CG2900 GPS FM Bluetooth combo controller */
++ { "cg2900", 0x0000, 0x0000, HCI_UART_STE, 115200, 115200,
++ FLOW_CTL, DISABLE_PM, NULL, NULL },
++
++
+ /* ST Microelectronics minikits based on STLC2410/STLC2415 */
+ { "st", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200,
+ FLOW_CTL, DISABLE_PM, NULL, st },
+@@ -1157,10 +1162,10 @@ static struct uart_t * get_by_type(char *type)
+ }
+
+ /* Initialize UART driver */
+-static int init_uart(char *dev, struct uart_t *u, int send_break, int raw)
++static int init_uart(char *dev, struct uart_t *u, int send_break, int raw, int line_disc)
+ {
+ struct termios ti;
+- int fd, i;
++ int fd;
+ unsigned long flags = 0;
+
+ if (raw)
+@@ -1217,8 +1222,7 @@ static int init_uart(char *dev, struct uart_t *u, int send_break, int raw)
+ }
+
+ /* Set TTY to N_HCI line discipline */
+- i = N_HCI;
+- if (ioctl(fd, TIOCSETD, &i) < 0) {
++ if (ioctl(fd, TIOCSETD, &line_disc) < 0) {
+ perror("Can't set line discipline");
+ return -1;
+ }
+@@ -1243,7 +1247,7 @@ static void usage(void)
+ {
+ printf("hciattach - HCI UART driver initialization utility\n");
+ printf("Usage:\n");
+- printf("\thciattach [-n] [-p] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n");
++ printf("\thciattach [-n] [-p] [-a line_disc_nr] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n");
+ printf("\thciattach -l\n");
+ }
+
+@@ -1252,6 +1256,7 @@ int main(int argc, char *argv[])
+ struct uart_t *u = NULL;
+ int detach, printpid, raw, opt, i, n, ld, err;
+ int to = 10;
++ int line_disc = N_HCI;
+ int init_speed = 0;
+ int send_break = 0;
+ pid_t pid;
+@@ -1264,8 +1269,11 @@ int main(int argc, char *argv[])
+ printpid = 0;
+ raw = 0;
+
+- while ((opt=getopt(argc, argv, "bnpt:s:lr")) != EOF) {
++ while ((opt=getopt(argc, argv, "bnpt:s:lra:")) != EOF) {
+ switch(opt) {
++ case 'a':
++ line_disc = atoi(optarg);
++ break;
+ case 'b':
+ send_break = 1;
+ break;
+@@ -1381,7 +1389,7 @@ int main(int argc, char *argv[])
+ alarm(to);
+ bcsp_max_retries = to;
+
+- n = init_uart(dev, u, send_break, raw);
++ n = init_uart(dev, u, send_break, raw, line_disc);
+ if (n < 0) {
+ perror("Can't initialize device");
+ exit(1);
+diff --git a/tools/hciattach.h b/tools/hciattach.h
+index fed0d11..09b534d 100644
+--- a/tools/hciattach.h
++++ b/tools/hciattach.h
+@@ -39,6 +39,7 @@
+ #define HCI_UART_H4DS 3
+ #define HCI_UART_LL 4
+ #define HCI_UART_ATH3K 5
++#define HCI_UART_STE 6
+
+ #define HCI_UART_RAW_DEVICE 0
+
+--
+1.7.9.5
+
diff --git a/package/ccache/ccache.mk b/package/ccache/ccache.mk
index b9c2039cf..1cbad6e75 100644
--- a/package/ccache/ccache.mk
+++ b/package/ccache/ccache.mk
@@ -4,7 +4,7 @@
#
#############################################################
-CCACHE_VERSION = 3.1.7
+CCACHE_VERSION = 3.1.8
CCACHE_SITE = http://samba.org/ftp/ccache
CCACHE_SOURCE = ccache-$(CCACHE_VERSION).tar.bz2
diff --git a/package/cpanminus/cpanminus.mk b/package/cpanminus/cpanminus.mk
index d3a338b0b..e7e3f2959 100644
--- a/package/cpanminus/cpanminus.mk
+++ b/package/cpanminus/cpanminus.mk
@@ -7,12 +7,12 @@
CPANMINUS_VERSION = 1.5018
CPANMINUS_SOURCE = miyagawa-cpanminus-$(CPANMINUS_VERSION)-0-gee6cd30.tar.gz
CPANMINUS_SITE = https://github.com/miyagawa/cpanminus/tarball/$(CPANMINUS_VERSION)
-CPANMINUS_DEPENDENCIES = perl $(call qstrip,$(BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES))
+CPANMINUS_DEPENDENCIES = host-qemu perl $(call qstrip,$(BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES))
CPANMINUS_RUN_PERL = $(QEMU_USER) $(STAGING_DIR)/usr/bin/perl
CPANMINUS_ARCHNAME = $(shell $(CPANMINUS_RUN_PERL) -MConfig -e "print Config->{archname}")
-CPANMINUS_PERL_LIB = $(STAGING_DIR)/usr/lib/perl5/$(PERL_VERSION)
-CPANMINUS_PERL_SITELIB = $(TARGET_DIR)/usr/lib/perl5/site_perl/$(PERL_VERSION)
+CPANMINUS_PERL_LIB = $(STAGING_DIR)/usr/lib/perl
+CPANMINUS_PERL_SITELIB = $(TARGET_DIR)/usr/lib/perl
CPANMINUS_PERL_ARCHLIB = $(CPANMINUS_PERL_LIB)/$(CPANMINUS_ARCHNAME)
CPANMINUS_PERL_SITEARCH = $(CPANMINUS_PERL_SITELIB)/$(CPANMINUS_ARCHNAME)
CPANMINUS_PERL5LIB = $(CPANMINUS_PERL_SITEARCH):$(CPANMINUS_PERL_SITELIB):$(CPANMINUS_PERL_ARCHLIB):$(CPANMINUS_PERL_LIB)
@@ -27,8 +27,8 @@ define CPANMINUS_INSTALL_TARGET_CMDS
echo "PERL5LIB=$(CPANMINUS_PERL5LIB) $(CPANMINUS_RUN_PERL) \"\$$@\"" >>$(@D)/run_perl
chmod +x $(@D)/run_perl
PERL5LIB=$(CPANMINUS_PERL5LIB) \
- PERL_MM_OPT="DESTDIR=$(TARGET_DIR) PERL=$(@D)/run_perl PERL_LIB=$(CPANMINUS_PERL_LIB) PERL_ARCHLIB=$(CPANMINUS_PERL_ARCHLIB)" \
- PERL_MB_OPT="--destdir $(TARGET_DIR)" \
+ PERL_MM_OPT="DESTDIR=$(CPANMINUS_PERL_SITELIB) PERL=$(@D)/run_perl PERL_LIB=$(CPANMINUS_PERL_LIB) PERL_ARCHLIB=$(CPANMINUS_PERL_ARCHLIB)" \
+ PERL_MB_OPT="--destdir $(CPANMINUS_PERL_SITELIB)" \
RUN_PERL="$(@D)/run_perl" \
$(CPANMINUS_RUN_PERL) $(@D)/cpanm \
--perl=$(@D)/run_perl \
@@ -36,7 +36,7 @@ define CPANMINUS_INSTALL_TARGET_CMDS
--no-man-pages \
$(CPANMINUS_MIRROR) \
$(call qstrip,$(BR2_PACKAGE_CPANMINUS_MODULES))
- find $(CPANMINUS_PERL_SITEARCH) -type f -name *.bs -exec rm -f {} \;
+ -find $(CPANMINUS_PERL_SITEARCH) -type f -name *.bs -exec rm -f {} \;
endef
else
define CPANMINUS_INSTALL_TARGET_CMDS
diff --git a/package/gd/Config.in b/package/gd/Config.in
new file mode 100644
index 000000000..efac21d7e
--- /dev/null
+++ b/package/gd/Config.in
@@ -0,0 +1,62 @@
+config BR2_PACKAGE_GD
+ bool "gd"
+ help
+ GD is a graphics library. It allows your code to quickly
+ draw images complete with lines, arcs, text, multiple
+ colours, cut and paste from other images, flood fills, and
+ write out the result as a PNG file. This is particularly
+ useful in World Wide Web applications, where PNG is one of
+ the formats accepted for inline images by most browsers.
+
+ http://www.boutell.com/gd/
+
+if BR2_PACKAGE_GD
+
+menu "gd tools"
+
+config BR2_PACKAGE_GD_ANNOTATE
+ bool "annotate"
+
+config BR2_PACKAGE_GD_BDFTOGD
+ bool "bdftogd"
+ depends on BR2_PACKAGE_PERL
+
+config BR2_PACKAGE_GD_GD2COPYPAL
+ bool "gd2copypal"
+
+config BR2_PACKAGE_GD_GD2TOGIF
+ bool "gd2togif"
+
+config BR2_PACKAGE_GD_GD2TOPNG
+ bool "gd2topng"
+ select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_GDCMPGIF
+ bool "gdcmpgif"
+
+config BR2_PACKAGE_GD_GDPARTTOPNG
+ bool "gdparttopng"
+ select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_GDTOPNG
+ bool "gdtopng"
+ select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_GIFTOGD2
+ bool "giftogd2"
+
+config BR2_PACKAGE_GD_PNGTOGD
+ bool "pngtogd"
+ select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_PNGTOGD2
+ bool "pngtogd2"
+ select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_GD_WEBPNG
+ bool "webpng"
+ select BR2_PACKAGE_LIBPNG
+
+endmenu
+
+endif
diff --git a/package/gd/gd-fontconfig.patch b/package/gd/gd-fontconfig.patch
new file mode 100644
index 000000000..651fbec8a
--- /dev/null
+++ b/package/gd/gd-fontconfig.patch
@@ -0,0 +1,28 @@
+Patch from Gentoo:
+http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-libs/gd/files/gd-2.0.35-fontconfig.patch?view=log
+
+fix from upstream
+
+http://bugs.gentoo.org/363367
+
+# HG changeset patch
+# User tabe
+# Date 1239812355 0
+# Node ID 3ea283efcdafcb2acc1dd0ace1d3d48da6d8cec8
+# Parent 4f29a877875f63cee5a64e7bea406a61882a565e
+fixed FS#199
+
+199, Fixed useFontConfig() to work as documented (Ethan Merritt)
+
+diff -r 4f29a877875f -r 3ea283efcdaf gdft.c
+--- a/gdft.c Sat Apr 04 12:00:37 2009 +0000
++++ b/gdft.c Wed Apr 15 16:19:15 2009 +0000
+@@ -1659,7 +1659,7 @@
+ BGD_DECLARE(int) gdFTUseFontConfig(int flag)
+ {
+ #ifdef HAVE_LIBFONTCONFIG
+- fontConfigFlag = 1;
++ fontConfigFlag = flag;
+ return 1;
+ #else
+ return 0;
diff --git a/package/gd/gd-maxcolors.patch b/package/gd/gd-maxcolors.patch
new file mode 100644
index 000000000..161cf1993
--- /dev/null
+++ b/package/gd/gd-maxcolors.patch
@@ -0,0 +1,20 @@
+Patch from Gentoo:
+http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-libs/gd/files/gd-2.0.35-maxcolors.patch?view=log
+
+http://bugs.gentoo.org/292130
+
+fix in usptream repo already
+
+--- gd-2.0.35/gd_gd.c
++++ gd-2.0.35/gd_gd.c
+@@ -44,6 +44,10 @@
+ {
+ goto fail1;
+ }
++ if (im->colorsTotal > gdMaxColors)
++ {
++ goto fail1;
++ }
+ }
+ /* Int to accommodate truecolor single-color transparency */
+ if (!gdGetInt (&im->transparent, in))
diff --git a/package/gd/gd-no-zlib.patch b/package/gd/gd-no-zlib.patch
new file mode 100644
index 000000000..cb265b2a3
--- /dev/null
+++ b/package/gd/gd-no-zlib.patch
@@ -0,0 +1,51 @@
+[PATCH] gd_gd2: provide dummy implementations for all public symbols when !zlib
+
+gd_gd2.c only provides dummy implementations for some of it's public symbols
+when zlib isn't found, causing build failures in several of the tools.
+
+Fix it by providing dummy implementations for all of them.
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+---
+ gd_gd2.c | 30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+Index: gd-2.0.35/gd_gd2.c
+===================================================================
+--- gd-2.0.35.orig/gd_gd2.c
++++ gd-2.0.35/gd_gd2.c
+@@ -1068,4 +1068,34 @@
+ fprintf (stderr, "GD2 support is not available - no libz\n");
+ return NULL;
+ }
++
++BGD_DECLARE(gdImagePtr) gdImageCreateFromGd2Part (FILE * inFile, int srcx, int srcy, int w, int h)
++{
++ fprintf (stderr, "GD2 support is not available - no libz\n");
++ return NULL;
++}
++
++BGD_DECLARE(gdImagePtr) gdImageCreateFromGd2PartPtr (int size, void *data, int srcx, int srcy, int w,
++ int h)
++{
++ fprintf (stderr, "GD2 support is not available - no libz\n");
++ return NULL;
++}
++
++BGD_DECLARE(gdImagePtr) gdImageCreateFromGd2PartCtx (gdIOCtx * in, int srcx, int srcy, int w, int h)
++{
++ fprintf (stderr, "GD2 support is not available - no libz\n");
++ return NULL;
++}
++
++BGD_DECLARE(void) gdImageGd2 (gdImagePtr im, FILE * outFile, int cs, int fmt)
++{
++ fprintf (stderr, "GD2 support is not available - no libz\n");
++}
++
++BGD_DECLARE(void *) gdImageGd2Ptr (gdImagePtr im, int cs, int fmt, int *size)
++{
++ fprintf (stderr, "GD2 support is not available - no libz\n");
++ return NULL;
++}
+ #endif /* HAVE_LIBZ */
diff --git a/package/gd/gd.mk b/package/gd/gd.mk
new file mode 100644
index 000000000..476976430
--- /dev/null
+++ b/package/gd/gd.mk
@@ -0,0 +1,87 @@
+################################################################################
+#
+# gd
+#
+################################################################################
+
+GD_VERSION = 2.0.35
+GD_SOURCE = gd-$(GD_VERSION).tar.bz2
+GD_SITE = http://distfiles.gentoo.org/distfiles
+# needed because of configure.ac timestamp
+GD_AUTORECONF = YES
+GD_INSTALL_STAGING = YES
+GD_LICENSE = GD license
+GD_LICENSE_FILES = COPYING
+
+GD_CONF_OPT = --without-x --disable-rpath
+
+ifeq ($(BR2_PACKAGE_FONTCONFIG),y)
+GD_DEPENDENCIES += fontconfig
+GD_CONF_OPT += --with-fontconfig
+GD_CONF_ENV += ac_cv_path_FREETYPE_CONFIG=$(STAGING_DIR)/usr/bin/freetype-config
+endif
+
+ifeq ($(BR2_PACKAGE_JPEG),y)
+GD_DEPENDENCIES += jpeg
+GD_CONF_OPT += --with-jpeg
+endif
+
+ifeq ($(BR2_PACKAGE_LIBPNG),y)
+GD_DEPENDENCIES += libpng
+GD_CONF_OPT += --with-png
+endif
+
+ifeq ($(BR2_PACKAGE_XLIB_LIBXPM),y)
+GD_DEPENDENCIES += xlib_libXpm
+GD_CONF_OPT += --with-xpm
+endif
+
+ifeq ($(BR2_PACKAGE_ZLIB),y)
+GD_DEPENDENCIES += zlib
+endif
+
+ifeq ($(BR2_PACKAGE_GETTEXT),y)
+GD_DEPENDENCIES += gettext
+else
+# configure.ac has newer timestamp than aclocal.m4 / configure, so we need
+# to autoreconf to regenerate them (or set configure.ac timestamp to older
+# than them) to make the Makefile happy.
+# configure.ac refers to AM_ICONV which we only have if gettext is enabled,
+# so add a dummy definition elsewise
+define GD_FIXUP_ICONV
+ echo 'm4_ifndef([AM_ICONV],[m4_define([AM_ICONV],[:])])' \
+ >> $(@D)/acinclude.m4
+endef
+
+GD_PRE_CONFIGURE_HOOKS += GD_FIXUP_ICONV
+endif
+
+define GD_FIXUP_GDLIB_CONFIG
+ $(SED) 's%prefix=/usr%prefix=$(STAGING_DIR)/usr%' \
+ -e 's%exec_prefix=/usr%exec_prefix=$(STAGING_DIR)/usr%' \
+ $(STAGING_DIR)/usr/bin/gdlib-config
+endef
+
+GD_POST_INSTALL_STAGING_HOOKS += GD_FIXUP_GDLIB_CONFIG
+
+GD_TOOLS_ += gdlib-config
+GD_TOOLS_$(BR2_PACKAGE_GD_ANNOTATE) += annotate
+GD_TOOLS_$(BR2_PACKAGE_GD_BDFTOGD) += bdftogd
+GD_TOOLS_$(BR2_PACKAGE_GD_GD2COPYPAL) += gd2copypal
+GD_TOOLS_$(BR2_PACKAGE_GD_GD2TOGIF) += gd2togif
+GD_TOOLS_$(BR2_PACKAGE_GD_GD2TOPNG) += gd2topng
+GD_TOOLS_$(BR2_PACKAGE_GD_GDCMPGIF) += gdcmpgif
+GD_TOOLS_$(BR2_PACKAGE_GD_GDPARTTOPNG) += gdparttopng
+GD_TOOLS_$(BR2_PACKAGE_GD_GDTOPNG) += gdtopng
+GD_TOOLS_$(BR2_PACKAGE_GD_GIFTOGD2) += giftogd2
+GD_TOOLS_$(BR2_PACKAGE_GD_PNGTOGD) += pngtogd
+GD_TOOLS_$(BR2_PACKAGE_GD_PNGTOGD2) += pngtogd2
+GD_TOOLS_$(BR2_PACKAGE_GD_WEBPNG) += webpng
+
+define GD_REMOVE_TOOLS
+ rm -f $(addprefix $(TARGET_DIR)/usr/bin/,$(GD_TOOLS_))
+endef
+
+GD_POST_INSTALL_TARGET_HOOKS += GD_REMOVE_TOOLS
+
+$(eval $(autotools-package))
diff --git a/package/libebml/Config.in b/package/libebml/Config.in
new file mode 100644
index 000000000..ce855b232
--- /dev/null
+++ b/package/libebml/Config.in
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_LIBEBML
+ bool "libebml"
+ depends on BR2_INSTALL_LIBSTDCPP
+ help
+ Access library for the EBML (Extensible Binary Meta
+ Language, a binary derivative of XML) format.
+
+ http://matroska.org
+
+comment "libebml requires a toolchain with C++ support"
+ depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/libebml/libebml.mk b/package/libebml/libebml.mk
new file mode 100644
index 000000000..0a04635e1
--- /dev/null
+++ b/package/libebml/libebml.mk
@@ -0,0 +1,26 @@
+#############################################################
+#
+# libebml
+#
+#############################################################
+
+LIBEBML_VERSION = 1.2.2
+LIBEBML_SOURCE = libebml-$(LIBEBML_VERSION).tar.bz2
+LIBEBML_SITE = http://dl.matroska.org/downloads/libebml/
+LIBEBML_INSTALL_STAGING = YES
+LIBEBML_LICENSE = LGPLv2.1+
+LIBEBML_LICENSE_FILES = LICENSE.LGPL
+
+define LIBEBML_BUILD_CMDS
+ $(MAKE) -C $(@D)/make/linux CROSS="$(CCACHE) $(TARGET_CROSS)"
+endef
+
+define LIBEBML_INSTALL_STAGING_CMDS
+ $(MAKE) -C $(@D)/make/linux prefix=$(STAGING_DIR)/usr install
+endef
+
+define LIBEBML_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D)/make/linux prefix=$(TARGET_DIR)/usr install
+endef
+
+$(eval $(generic-package))
diff --git a/package/libmatroska/Config.in b/package/libmatroska/Config.in
new file mode 100644
index 000000000..b1c53eec0
--- /dev/null
+++ b/package/libmatroska/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_LIBMATROSKA
+ bool "libmatroska"
+ select BR2_PACKAGE_LIBEBML
+ depends on BR2_INSTALL_LIBSTDCPP
+ help
+ Extensible open standard audio/video container format access
+ library.
+
+ http://matroska.org
+
+comment "libmatroska requires a toolchain with C++ support"
+ depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/libmatroska/libmatroska.mk b/package/libmatroska/libmatroska.mk
new file mode 100644
index 000000000..605a2fb03
--- /dev/null
+++ b/package/libmatroska/libmatroska.mk
@@ -0,0 +1,27 @@
+#############################################################
+#
+# libmatroska
+#
+#############################################################
+
+LIBMATROSKA_VERSION = 1.3.0
+LIBMATROSKA_SOURCE = libmatroska-$(LIBMATROSKA_VERSION).tar.bz2
+LIBMATROSKA_SITE = http://dl.matroska.org/downloads/libmatroska/
+LIBMATROSKA_INSTALL_STAGING = YES
+LIBMATROSKA_LICENSE = LGPLv2.1+
+LIBMATROSKA_LICENSE_FILES = LICENSE.LGPL
+LIBMATROSKA_DEPENDENCIES = libebml
+
+define LIBMATROSKA_BUILD_CMDS
+ $(MAKE) -C $(@D)/make/linux CROSS="$(CCACHE) $(TARGET_CROSS)"
+endef
+
+define LIBMATROSKA_INSTALL_STAGING_CMDS
+ $(MAKE) -C $(@D)/make/linux prefix=$(STAGING_DIR)/usr install
+endef
+
+define LIBMATROSKA_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D)/make/linux prefix=$(TARGET_DIR)/usr install
+endef
+
+$(eval $(generic-package))
diff --git a/package/libroxml/libroxml-2.2.0-werror.patch b/package/libroxml/libroxml-werror.patch
index a72f2a786..a99962f30 100644
--- a/package/libroxml/libroxml-2.2.0-werror.patch
+++ b/package/libroxml/libroxml-werror.patch
@@ -7,10 +7,10 @@ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-Index: libroxml-2.1.0/Makefile
+Index: a/Makefile
===================================================================
---- libroxml-2.1.0.orig/Makefile
-+++ libroxml-2.1.0/Makefile
+--- a/Makefile
++++ b/Makefile
@@ -41,7 +41,7 @@
# options
diff --git a/package/libroxml/libroxml.mk b/package/libroxml/libroxml.mk
index 457a28a81..d7ef6a48d 100644
--- a/package/libroxml/libroxml.mk
+++ b/package/libroxml/libroxml.mk
@@ -2,7 +2,7 @@
# libroxml
#
-LIBROXML_VERSION = 2.2.0
+LIBROXML_VERSION = 2.2.1
LIBROXML_SITE = http://libroxml.googlecode.com/files
LIBROXML_INSTALL_STAGING = YES
diff --git a/package/multimedia/gstreamer/Config.in b/package/multimedia/gstreamer/Config.in
index 4d279b8b1..9a6748106 100644
--- a/package/multimedia/gstreamer/Config.in
+++ b/package/multimedia/gstreamer/Config.in
@@ -12,9 +12,17 @@ config BR2_PACKAGE_GSTREAMER_GST_DEBUG
default y
depends on BR2_PACKAGE_GSTREAMER
help
- Enable support for the gst-debug tracing functionality
- in gstreamer. This has limited CPU overhead, but does
- increase the rootfs size somewhat.
+ Enable support for the gst-debug tracing functionality in gstreamer.
+ This has limited CPU overhead, but does increase the rootfs size
+ somewhat.
+
+config BR2_PACKAGE_GSTREAMER_PLUGIN_REGISTRY
+ bool "enable plugin registry"
+ default y
+ depends on BR2_PACKAGE_GSTREAMER
+ help
+ Enable support for the GStreamer plugin registry. This may increase
+ the launch-time for a GStreamer application.
comment "gstreamer requires a toolchain with WCHAR support"
depends on !BR2_USE_WCHAR
diff --git a/package/multimedia/gstreamer/gstreamer.mk b/package/multimedia/gstreamer/gstreamer.mk
index a9841b17c..b87f0294f 100644
--- a/package/multimedia/gstreamer/gstreamer.mk
+++ b/package/multimedia/gstreamer/gstreamer.mk
@@ -21,7 +21,8 @@ GSTREAMER_CONF_OPT = \
--disable-tests \
--disable-failing-tests \
--disable-loadsave \
- $(if $(BR2_PACKAGE_GSTREAMER_GST_DEBUG),,--disable-gst-debug)
+ $(if $(BR2_PACKAGE_GSTREAMER_GST_DEBUG),,--disable-gst-debug) \
+ $(if $(BR2_PACKAGE_GSTREAMER_PLUGIN_REGISTRY),,--disable-registry)
GSTREAMER_DEPENDENCIES = libglib2 host-pkgconf
diff --git a/package/perl/perl-configure-qemu.patch b/package/perl/perl-configure-qemu.patch
deleted file mode 100644
index c2d6b9265..000000000
--- a/package/perl/perl-configure-qemu.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-Add qemu support
-
-see https://rt.perl.org/rt3//Public/Bug/Display.html?id=114798
-
-Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
-
-Index: b/Configure
-===================================================================
---- a/Configure
-+++ b/Configure
-@@ -2837,6 +2837,9 @@
- ;;
- *) echo "Using usrinc $usrinc." >&4 ;;
- esac
-+ case "$targetrun" in
-+ *qemu*) targethost=dummy ;;
-+ esac
- case "$targethost" in
- '') echo "Targethost not defined." >&4; croak=y ;;
- *) echo "Using targethost $targethost." >&4
-@@ -2868,7 +2871,7 @@
- case "$targetfrom" in
- '') targetfrom=scp ;;
- esac
-- run=$run-$targetrun
-+ run=$run-`basename $targetrun`
- to=$to-$targetto
- from=$from-$targetfrom
- case "$targetdir" in
-@@ -2908,6 +2911,14 @@
- $targetrun -l $targetuser $targethost "cd \$cwd && ./\$exe \$@"
- EOF
- ;;
-+ *qemu*)
-+ to=:
-+ from=:
-+ cat >$run <<EOF
-+#!/bin/sh
-+$targetrun -L $qemulib "\$@"
-+EOF
-+ ;;
- *) echo "Unknown targetrun '$targetrun'" >&4
- exit 1
- ;;
-@@ -5048,7 +5059,7 @@
- echo " ";
- echo "Checking if your compiler accepts $flag" 2>&1;
- echo "int main(void) { return 0; }" > gcctest.c;
--if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && ./gcctest; then
-+if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && $run ./gcctest; then
- echo "Yes, it does." 2>&1;
- if $test -s gcctest.out ; then
- echo "But your platform does not like it:";
diff --git a/package/perl/perl-make-ext.patch b/package/perl/perl-make-ext.patch
deleted file mode 100644
index e0195e7a2..000000000
--- a/package/perl/perl-make-ext.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-Don't use RUN with make (only for perl)
-
-Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
-
-Index: b/make_ext.pl
-===================================================================
---- a/make_ext.pl
-+++ b/make_ext.pl
-@@ -458,11 +458,13 @@
- # Give makefile an opportunity to rewrite itself.
- # reassure users that life goes on...
- my @args = ('config', @$pass_through);
-- system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
-+# system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
-+ system(@make, @args) and print "@make @args failed, continuing anyway...\n";
- }
- my @targ = ($target, @$pass_through);
- print "Making $target in $ext_dir\n@run @make @targ\n";
-- my $code = system(@run, @make, @targ);
-+# my $code = system(@run, @make, @targ);
-+ my $code = system(@make, @targ);
- die "Unsuccessful make($ext_dir): code=$code" if $code != 0;
-
- chdir $return_dir || die "Cannot cd to $return_dir: $!";
diff --git a/package/perl/perl-mkppport.patch b/package/perl/perl-mkppport.patch
deleted file mode 100644
index 97f27a202..000000000
--- a/package/perl/perl-mkppport.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-Add RUN
-
-Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
-
-Index: b/mkppport
-===================================================================
---- a/mkppport
-+++ b/mkppport
-@@ -1,6 +1,7 @@
- use strict;
- use warnings;
-
-+use Config;
- use Getopt::Long;
- use File::Spec;
- use File::Compare qw( compare );
-@@ -136,14 +137,18 @@
- #----------------------------------------------
- sub run
- {
-+ my @run = $Config{run};
-+ @run = () if not defined $run[0] or $run[0] eq '';
- my @args = ("-I" . File::Spec->catdir((File::Spec->updir) x 2, 'lib'), @_);
- my $run = $perl =~ m/\s/ ? qq("$perl") : $perl;
- for (@args) {
- $_ = qq("$_") if $^O eq 'VMS' && /^[^"]/;
- $run .= " $_";
- }
-- print "running $run\n";
-- system $run and die "$run failed: $?\n";
-+# print "running $run\n";
-+# system $run and die "$run failed: $?\n";
-+ print "running ", join(' ', @run, $run), "\n";
-+ system join(' ', @run, $run) and die "@run $run failed: $?\n";
- }
-
- __END__
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index f3c73dd79..391047d38 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -13,8 +13,11 @@ PERL_LICENSE_FILES = Artistic
PERL_INSTALL_STAGING = YES
PERL_CROSS_VERSION = 0.7
+PERL_CROSS_BASE_VERSION = 5.$(PERL_VERSION_MAJOR).0
PERL_CROSS_SITE = http://download.berlios.de/perlcross
-PERL_CROSS_SOURCE = perl-5.$(PERL_VERSION_MAJOR).0-cross-$(PERL_CROSS_VERSION).tar.gz
+PERL_CROSS_SOURCE = perl-$(PERL_CROSS_BASE_VERSION)-cross-$(PERL_CROSS_VERSION).tar.gz
+PERL_CROSS_OLD_POD = perl$(subst .,,$(PERL_CROSS_BASE_VERSION))delta.pod
+PERL_CROSS_NEW_POD = perl$(subst .,,$(PERL_VERSION))delta.pod
# We use the perlcross hack to cross-compile perl. It should
# be extracted over the perl sources, so we don't define that
@@ -32,6 +35,11 @@ define PERL_CROSS_EXTRACT
endef
PERL_POST_EXTRACT_HOOKS += PERL_CROSS_EXTRACT
+define PERL_CROSS_SET_POD
+ $(SED) s/$(PERL_CROSS_OLD_POD)/$(PERL_CROSS_NEW_POD)/g $(@D)/Makefile
+endef
+PERL_POST_PATCH_HOOKS += PERL_CROSS_SET_POD
+
ifeq ($(BR2_PACKAGE_BERKELEYDB),y)
PERL_DEPENDENCIES += berkeleydb
endif
@@ -39,31 +47,22 @@ ifeq ($(BR2_PACKAGE_GDBM),y)
PERL_DEPENDENCIES += gdbm
endif
-# Normally, --mode=cross should automatically do the two steps
-# below, but it doesn't work for some reason.
-PERL_HOST_CONF_OPT = \
- --mode=buildmini \
- --target=$(GNU_TARGET_NAME) \
- --target-arch=$(GNU_TARGET_NAME) \
- --set-target-name=$(GNU_TARGET_NAME)
-
# We have to override LD, because an external multilib toolchain ld is not
# wrapped to provide the required sysroot options. We also can't use ccache
# because the configure script doesn't support it.
PERL_CONF_OPT = \
- --mode=target \
--target=$(GNU_TARGET_NAME) \
--target-tools-prefix=$(TARGET_CROSS) \
--prefix=/usr \
-Dld="$(TARGET_CC_NOCCACHE)" \
- -A ccflags="$(TARGET_CFLAGS)" \
- -A ldflags="$(TARGET_LDFLAGS) -lm" \
- -A mydomain="" \
- -A myhostname="$(BR2_TARGET_GENERIC_HOSTNAME)" \
- -A myuname="Buildroot $(BR2_VERSION_FULL)" \
- -A osname=linux \
- -A osvers=$(LINUX_VERSION) \
- -A perlamdin=root
+ -Dccflags="$(TARGET_CFLAGS)" \
+ -Dldflags="$(TARGET_LDFLAGS) -lm" \
+ -A define:mydomain="" \
+ -A define:myhostname="$(BR2_TARGET_GENERIC_HOSTNAME)" \
+ -A define:myuname="Buildroot $(BR2_VERSION_FULL)" \
+ -A define:osname=linux \
+ -A define:osvers=$(LINUX_VERSION) \
+ -A define:perladmin=root
ifeq ($(shell expr $(PERL_VERSION_MAJOR) % 2), 1)
PERL_CONF_OPT += -Dusedevel
@@ -79,8 +78,7 @@ PERL_CONF_OPT += --only-mod=$(subst $(space),$(comma),$(PERL_MODULES))
endif
define PERL_CONFIGURE_CMDS
- (cd $(@D); HOSTCC='$(HOSTCC_NOCACHE)' ./configure $(PERL_HOST_CONF_OPT))
- (cd $(@D); ./configure $(PERL_CONF_OPT))
+ (cd $(@D); HOSTCC='$(HOSTCC_NOCACHE)' ./configure $(PERL_CONF_OPT))
$(SED) 's/UNKNOWN-/Buildroot $(BR2_VERSION_FULL) /' $(@D)/patchlevel.h
endef
diff --git a/package/snowball-hdmiservice/Config.in b/package/snowball-hdmiservice/Config.in
new file mode 100644
index 000000000..0ea7c8120
--- /dev/null
+++ b/package/snowball-hdmiservice/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_SNOWBALL_HDMISERVICE
+ bool "snowball-hdmiservice"
+ depends on BR2_TOOLCHAIN_HAS_THREADS
+ help
+ HDMI userspace control daemon
+
+ This package contains the HDMI userspace control daemon for the
+ snowball board
+
+ http://www.igloocommunity.org
diff --git a/package/snowball-hdmiservice/snowball-hdmiservice.mk b/package/snowball-hdmiservice/snowball-hdmiservice.mk
new file mode 100644
index 000000000..ebd65dfba
--- /dev/null
+++ b/package/snowball-hdmiservice/snowball-hdmiservice.mk
@@ -0,0 +1,41 @@
+#############################################################
+#
+# snowball-hdmiservice
+#
+#############################################################
+SNOWBALL_HDMISERVICE_VERSION = f75c99d1c52707240a78b4ba78e41d20d3aa3b08
+SNOWBALL_HDMISERVICE_SITE = git://igloocommunity.org/git/bsp/hdmiservice.git
+SNOWBALL_HDMISERVICE_LICENSE = MIT
+SNOWBALL_HDMISERVICE_LICENSE_FILES = debian/copyright
+SNOWBALL_HDMISERVICE_INSTALL_STAGING = YES
+
+define SNOWBALL_HDMISERVICE_BUILD_CMDS
+ $(MAKE) -C $(@D) CC="$(TARGET_CC) $(TARGET_CFLAGS)"
+endef
+
+define SNOWBALL_HDMISERVICE_INSTALL_STAGING_CMDS
+ $(MAKE) -C $(@D) CC="$(TARGET_CC) $(TARGET_CFLAGS)" DESTDIR=$(STAGING_DIR) install
+endef
+
+define SNOWBALL_HDMISERVICE_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) CC="$(TARGET_CC) $(TARGET_CFLAGS)" DESTDIR=$(TARGET_DIR) install
+endef
+
+define SNOWBALL_HDMISERVICE_UNINSTALL_STAGING_CMDS
+ rm -f $(STAGING_DIR)/usr/lib/hdmiservice.so
+ rm -f $(STAGING_DIR)/usr/bin/hdmistart
+ rm -f $(STAGING_DIR)/usr/include/hdmi_service_api.h
+ rm -f $(STAGING_DIR)/usr/include/hdmi_service_local.h
+endef
+
+define SNOWBALL_HDMISERVICE_UNINSTALL_TARGET_CMDS
+ rm -f $(TARGET_DIR)/usr/lib/hdmiservice.so
+ rm -f $(TARGET_DIR)/usr/bin/hdmistart
+endef
+
+define SNOWBALL_HDMISERVICE_CLEAN_CMDS
+ $(MAKE) -C $(@D) clean
+endef
+
+
+$(eval $(generic-package))
diff --git a/package/snowball-init/Config.in b/package/snowball-init/Config.in
new file mode 100644
index 000000000..99abb350f
--- /dev/null
+++ b/package/snowball-init/Config.in
@@ -0,0 +1,14 @@
+config BR2_PACKAGE_SNOWBALL_INIT
+ bool "snowball-init"
+ # Runtime dependency, needed by snowball startup script
+ select BR2_PACKAGE_BLUEZ_UTILS
+ depends on !BR2_avr32
+ depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib
+ depends on BR2_USE_MMU # dbus
+ select BR2_PACKAGE_UX500_FIRMWARE
+ help
+ Snowball init scripts
+
+ http://www.igloocommunity.org
+
diff --git a/package/snowball-init/snowball-init.mk b/package/snowball-init/snowball-init.mk
new file mode 100644
index 000000000..278cacb2c
--- /dev/null
+++ b/package/snowball-init/snowball-init.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# snowball-init
+#
+#############################################################
+SNOWBALL_INIT_VERSION = b064be21de25729039e5e54037bbdd2e25cfd5b7
+SNOWBALL_INIT_SITE = git://igloocommunity.org/git/bsp/snowball-init.git
+SNOWBALL_INIT_LICENSE = BSD-4c
+SNOWBALL_INIT_LICENSE_FILES = debian/copyright
+
+define SNOWBALL_INIT_INSTALL_TARGET_CMDS
+ $(INSTALL) -D -m 0755 $(@D)/snowball $(TARGET_DIR)/etc/init.d/S50snowball
+endef
+
+$(eval $(generic-package))
diff --git a/package/ux500-firmware/Config.in b/package/ux500-firmware/Config.in
new file mode 100644
index 000000000..7e8a94b2a
--- /dev/null
+++ b/package/ux500-firmware/Config.in
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_UX500_FIRMWARE
+ bool "ux500-firmware"
+ help
+ This package provides various binary firmware files (closed binary blobs)
+ for the Azurewave AW-NH580 combo module (wifi, bt, gps).
+
+ https://launchpad.net/~igloocommunity-maintainers/+archive/snowball/+files/
diff --git a/package/ux500-firmware/ux500-firmware.mk b/package/ux500-firmware/ux500-firmware.mk
new file mode 100644
index 000000000..d354468ab
--- /dev/null
+++ b/package/ux500-firmware/ux500-firmware.mk
@@ -0,0 +1,22 @@
+#############################################################
+#
+# ux500-firmware
+#
+#############################################################
+UX500_FIRMWARE_VERSION = 1.1.3-6
+UX500_FIRMWARE_SOURCE = ux500-firmware_$(UX500_FIRMWARE_VERSION)linaro1.tar.gz
+UX500_FIRMWARE_SITE = https://launchpad.net/~igloocommunity-maintainers/+archive/snowball/+files/
+UX500_FIRMWARE_LICENSE = Snowball click-wrap license
+UX500_FIRMWARE_LICENSE_FILES = license.txt
+UX500_FIRMWARE_REDISTRIBUTE = NO
+
+# The CG2900 linux driver has to load firmware named CG29XX_* but the firmware
+# filenames contained in this package are CG2900_* hence the code below
+define UX500_FIRMWARE_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+ for f in $(TARGET_DIR)/lib/firmware/CG2900* ; do \
+ mv $$f $${f/CG2900/CG29XX}; \
+ done
+endef
+
+$(eval $(generic-package))
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index f04ced697..4fe605d86 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -3,8 +3,8 @@ if BR2_TOOLCHAIN_EXTERNAL
choice
prompt "Toolchain"
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
- bool "Linaro 2012.10"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11
+ bool "Linaro 2012.11"
depends on BR2_arm
depends on BR2_cortex_a8 || BR2_cortex_a9
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
@@ -12,7 +12,7 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
select BR2_INSTALL_LIBSTDCPP
help
Linaro toolchain for the ARM architecture. It uses Linaro
- GCC 2012.10 (based on gcc 4.7), Linaro GDB 2012.10 (based on
+ GCC 2012.11 (based on gcc 4.7), Linaro GDB 2012.10 (based on
GDB 7.5), eglibc 2.15. It generates code that runs on all
Cortex-A profile devices, but tuned for the Cortex-A9. The
code generated is Thumb 2, with the hard floating point
@@ -20,8 +20,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
To use this toolchain, you must disable soft float usage.
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
- bool "Linaro 2012.09"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
+ bool "Linaro 2012.10"
depends on BR2_arm
depends on BR2_cortex_a8 || BR2_cortex_a9
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
@@ -29,7 +29,7 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
select BR2_INSTALL_LIBSTDCPP
help
Linaro toolchain for the ARM architecture. It uses Linaro
- GCC 2012.09 (based on gcc 4.7), Linaro GDB 2012.09 (based on
+ GCC 2012.10 (based on gcc 4.7), Linaro GDB 2012.10 (based on
GDB 7.5), eglibc 2.15. It generates code that runs on all
Cortex-A profile devices, but tuned for the Cortex-A9. The
code generated is Thumb 2, with the hard floating point
@@ -37,8 +37,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
To use this toolchain, you must disable soft float usage.
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08
- bool "Linaro 2012.08"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
+ bool "Linaro 2012.09"
depends on BR2_arm
depends on BR2_cortex_a8 || BR2_cortex_a9
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
@@ -46,14 +46,18 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08
select BR2_INSTALL_LIBSTDCPP
help
Linaro toolchain for the ARM architecture. It uses Linaro
- GCC 2012.08 (based on gcc 4.7), Linaro GDB 2012.06 (based on
- GDB 7.4), eglibc 2.15. It generates code that runs on all
+ GCC 2012.09 (based on gcc 4.7), Linaro GDB 2012.09 (based on
+ GDB 7.5), eglibc 2.15. It generates code that runs on all
Cortex-A profile devices, but tuned for the Cortex-A9. The
code generated is Thumb 2, with the hard floating point
calling convention, and uses the VFPv3-D16 FPU instructions.
To use this toolchain, you must disable soft float usage.
+comment "Linaro toolchains available for Cortex-A{8,9}"
+ depends on BR2_arm
+ depends on !BR2_cortex_a8 && !BR2_cortex_a9
+
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
bool "Sourcery CodeBench ARM 2012.03"
depends on BR2_arm
@@ -624,9 +628,9 @@ config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX
config BR2_TOOLCHAIN_EXTERNAL_PREFIX
string
- default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08
default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09
default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10
+ default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201109
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 8ce0a8472..beba49fff 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -184,15 +184,15 @@ TOOLCHAIN_EXTERNAL_SOURCE=arm-2011.09-70-arm-none-linux-gnueabi-i686-pc-linux-gn
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE=arm-2012.03-57-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_08),y)
-TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.08/+download/
-TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-2012.08-20120827_linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_09),y)
TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.09/+download/
TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-2012.09-20120921_linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_10),y)
TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.10/+download/
TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2012.10-20121022_linux.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2012_11),y)
+TOOLCHAIN_EXTERNAL_SITE=https://launchpad.net/linaro-toolchain-binaries/trunk/2012.11/+download/
+TOOLCHAIN_EXTERNAL_SOURCE=gcc-linaro-arm-linux-gnueabihf-4.7-2012.11-20121123_linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package7401/public/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2