diff options
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/001-q5 | 342 | ||||
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 | 162 | ||||
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/006-cfi | 27 | ||||
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/007-au1000 | 13 | ||||
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/008-wbflush | 14 | ||||
| -rw-r--r-- | target/device/jp/q5/kernel-patches-2.4.32/100-version | 11 | ||||
| -rw-r--r-- | target/device/jp/q5/linux.config | 60 | ||||
| -rw-r--r-- | target/device/jp/q5/linux.mk | 5 | ||||
| -rw-r--r-- | target/device/jp/q5/uClibc.config.mipsel | 7 |
9 files changed, 621 insertions, 20 deletions
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 b/target/device/jp/q5/kernel-patches-2.4.32/001-q5 new file mode 100644 index 000000000..1e2718a7a --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.32/001-q5 @@ -0,0 +1,342 @@ +diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile +--- linux-2.4.31.org/arch/mips/Makefile 2005-01-19 09:09:26.000000000 -0500 ++++ linux-2.4.31/arch/mips/Makefile 2005-09-10 17:29:44.000000000 -0400 +@@ -241,6 +241,16 @@ + endif + + # ++# jp-embedded Q5 board ++# ++ifdef CONFIG_MIPS_Q5 ++LIBS += arch/mips/jp-embedded/q5/q5.o \ ++ arch/mips/au1000/common/au1000.o ++SUBDIRS += arch/mips/jp-embedded/q5 arch/mips/au1000/common ++LOADADDR := 0x80100000 ++endif ++ ++# + # Au1x00 (AMD/Alchemy) eval boards + # + ifdef CONFIG_MIPS_DB1000 +diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c +--- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c 2005-01-19 09:09:26.000000000 -0500 ++++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c 2005-09-10 17:47:29.000000000 -0400 +@@ -101,7 +101,7 @@ + + void __init pcibios_fixup_irqs(void) + { +-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) ++#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 ) + unsigned int slot; + unsigned char pin; + struct pci_dev *dev; +diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in +--- linux-2.4.31.org/arch/mips/config-shared.in 2005-01-19 09:09:27.000000000 -0500 ++++ linux-2.4.31/arch/mips/config-shared.in 2005-08-23 00:30:32.000000000 -0400 +@@ -31,6 +31,7 @@ + dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 + dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 + dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 ++dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32 + dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32 + dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32 + dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32 +@@ -277,6 +278,12 @@ + define_bool CONFIG_NONCOHERENT_IO y + define_bool CONFIG_PC_KEYB y + fi ++if [ "$CONFIG_MIPS_Q5" = "y" ]; then ++ define_bool CONFIG_SOC_AU1X00 y ++ define_bool CONFIG_SOC_AU1500 y ++ define_bool CONFIG_NONCOHERENT_IO y ++ define_bool CONFIG_PC_KEYB y ++fi + if [ "$CONFIG_MIPS_DB1000" = "y" ]; then + define_bool CONFIG_SOC_AU1X00 y + define_bool CONFIG_SOC_AU1000 y +@@ -729,6 +736,7 @@ + "$CONFIG_MIPS_PB1000" = "y" -o \ + "$CONFIG_MIPS_PB1100" = "y" -o \ + "$CONFIG_MIPS_PB1500" = "y" -o \ ++ "$CONFIG_MIPS_Q5" = "y" -o \ + "$CONFIG_NEC_OSPREY" = "y" -o \ + "$CONFIG_NEC_EAGLE" = "y" -o \ + "$CONFIG_NINO" = "y" -o \ +diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile +--- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile 1969-12-31 19:00:00.000000000 -0500 ++++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile 2005-09-10 16:46:20.000000000 -0400 +@@ -0,0 +1,9 @@ ++USE_STANDARD_AS_RULE := true ++ ++O_TARGET := q5.o ++ ++export-objs = init.o ++ ++obj-y := init.o board_setup.o irqmap.o ++ ++include $(TOPDIR)/Rules.make +diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c +--- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c 1969-12-31 19:00:00.000000000 -0500 ++++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c 2005-08-30 14:46:21.000000000 -0400 +@@ -0,0 +1,97 @@ ++/* ++ * ++ * BRIEF MODULE DESCRIPTION ++ * jp-embedded Q5 board setup. ++ * ++ * Author: jp@jp-embedded.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/sched.h> ++#include <linux/ioport.h> ++#include <linux/mm.h> ++#include <linux/console.h> ++#include <linux/mc146818rtc.h> ++#include <linux/delay.h> ++ ++#include <asm/cpu.h> ++#include <asm/bootinfo.h> ++#include <asm/irq.h> ++#include <asm/keyboard.h> ++#include <asm/mipsregs.h> ++#include <asm/reboot.h> ++#include <asm/pgtable.h> ++#include <asm/au1000.h> ++#include <asm/pb1500.h> ++ ++#ifdef CONFIG_USB_OHCI ++// Enable the workaround for the OHCI DoneHead ++// register corruption problem. ++#define CONFIG_AU1000_OHCI_FIX ++#endif ++ ++#ifdef CONFIG_RTC ++extern struct rtc_ops pb1500_rtc_ops; ++#endif ++ ++void board_reset (void) ++{ ++ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */ ++ au_writel(0x00000000, 0xAE00001C); ++} ++ ++void __init board_setup(void) ++{ ++ u32 pin_func; ++ u32 sys_freqctrl, sys_clksrc; ++ ++#ifdef CONFIG_PCI ++ // Setup PCI bus controller ++ au_writel(0, Au1500_PCI_CMEM); ++ au_writel(0x00003fff, Au1500_CFG_BASE); ++ au_writel(0xf, Au1500_PCI_CFG); ++ au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); ++ au_writel(0, Au1500_PCI_MWBASE_REV_CCL); ++ au_writel(0x02a00356, Au1500_PCI_STATCMD); ++ au_writel(0x00003c04, Au1500_PCI_HDRTYPE); ++ au_writel(0x00000008, Au1500_PCI_MBAR); ++ au_sync(); ++#endif ++ ++ /* Enable sys bus clock divider when IDLE state or no bus activity. */ ++ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); ++ ++#ifdef CONFIG_RTC ++ rtc_ops = &pb1500_rtc_ops; ++ // Enable the RTC if not already enabled ++ if (!(au_readl(0xac000028) & 0x20)) { ++ printk("enabling clock ...\n"); ++ au_writel((au_readl(0xac000028) | 0x20), 0xac000028); ++ } ++ // Put the clock in BCD mode ++ if (readl(0xac00002C) & 0x4) { /* reg B */ ++ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); ++ au_sync(); ++ } ++#endif ++} +diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c +--- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c 1969-12-31 19:00:00.000000000 -0500 ++++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c 2005-09-10 16:43:21.000000000 -0400 +@@ -0,0 +1,80 @@ ++/* ++ * ++ * BRIEF MODULE DESCRIPTION ++ * jp-embedded Q5 board setup. ++ * ++ * Author: jp@jp-embedded.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/sched.h> ++#include <linux/bootmem.h> ++#include <asm/addrspace.h> ++#include <asm/bootinfo.h> ++#include <linux/string.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++ ++int prom_argc; ++char **prom_argv, **prom_envp; ++extern void __init prom_init_cmdline(void); ++extern char *prom_getenv(char *envname); ++void (*__wbflush) (void); ++ ++void au1500_wbflush(void) ++{ ++ __asm__ volatile ("sync"); ++} ++ ++const char *get_system_type(void) ++{ ++ return "jp-embedded Q5"; ++} ++ ++int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) ++{ ++ unsigned char *memsize_str; ++ unsigned long memsize; ++ ++ prom_argc = argc; ++ prom_argv = argv; ++ prom_envp = envp; ++ ++ __wbflush = au1500_wbflush; ++ ++ /* obs */ ++ mips_machgroup = MACH_GROUP_ALCHEMY; ++ mips_machtype = MACH_PB1500; ++ ++ prom_init_cmdline(); ++ memsize_str = prom_getenv("memsize"); ++ if (!memsize_str) { ++ memsize = 0x04000000; ++ } else { ++ memsize = simple_strtol(memsize_str, NULL, 0); ++ } ++ add_memory_region(0, memsize, BOOT_MEM_RAM); ++ return 0; ++} ++ ++EXPORT_SYMBOL(__wbflush); +diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c +--- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c 1969-12-31 19:00:00.000000000 -0500 ++++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c 2005-09-10 16:45:18.000000000 -0400 +@@ -0,0 +1,61 @@ ++/* ++ * ++ * BRIEF MODULE DESCRIPTION ++ * jp-embedded Q5 board setup. ++ * ++ * Author: jp@jp-embedded.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++#include <linux/kernel_stat.h> ++#include <linux/module.h> ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/types.h> ++#include <linux/interrupt.h> ++#include <linux/ioport.h> ++#include <linux/timex.h> ++#include <linux/slab.h> ++#include <linux/random.h> ++#include <linux/delay.h> ++ ++#include <asm/bitops.h> ++#include <asm/bootinfo.h> ++#include <asm/io.h> ++#include <asm/mipsregs.h> ++#include <asm/system.h> ++#include <asm/au1000.h> ++ ++au1xxx_irq_map_t au1xxx_irq_map[] = { ++ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, ++ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, ++ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, ++}; ++ ++int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); ++ +--- linux-2.4.31.org/Documentation/Configure.help 2005-04-03 21:42:19.000000000 -0400 ++++ linux-2.4.31/Documentation/Configure.help 2005-09-10 18:50:14.340000000 -0400 +@@ -2197,6 +2197,12 @@ + MIPS-32-based Baget embedded system. This chipset is better known + via the NE2100 cards. + ++jp-embedded Q5 support ++CONFIG_MIPS_Q5 ++ This enables support for jp-embedded's MIPS based boards. The ++ boards uses the AU1500 cpu. For more information about these ++ boards, see <http://www.jp-embedded.com/>. ++ + Support for DECstations + CONFIG_DECSTATION + This enables support for DEC's MIPS based workstations. For details diff --git a/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 b/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 new file mode 100644 index 000000000..9d0d80d96 --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 @@ -0,0 +1,162 @@ +diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c +--- linux-2.4.31.org/drivers/net/au1000_eth.c 2005-01-19 09:09:56.000000000 -0500 ++++ linux-2.4.31/drivers/net/au1000_eth.c 2005-08-22 12:24:31.000000000 -0400 +@@ -595,6 +595,97 @@ + return 0; + } + ++int ns_83847_reset(struct net_device *dev, int phy_addr) ++ { ++ s16 mii_control, timeout; ++ ++ // printk("ns_reset\n"); ++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); ++ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); ++ mdelay(1); ++ for (timeout = 100; timeout > 0; --timeout) { ++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL); ++ if ((mii_control & MII_CNTL_RESET) == 0) ++ break; ++ mdelay(1); ++ } ++ if (mii_control & MII_CNTL_RESET) { ++ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); ++ return -1; ++ } ++ return 0; ++ } ++ ++int ns_83847_init(struct net_device *dev, int phy_addr) ++ { ++ s16 data; ++ // printk("ns_init\n"); ++ ++ /* Stop auto-negotiation */ ++ // data = mdio_read(dev, phy_addr, MII_CONTROL); ++ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); ++ // mdio_write(dev, phy_addr, 0, 0x0000); ++ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */); ++ ++ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */ ++ data = mdio_read(dev, phy_addr, MII_ANADV); ++ /* obs PAUSE bit */ ++ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ; ++ mdio_write(dev, phy_addr, MII_ANADV, data); ++ ++ /* Bypass led stretching? */ ++ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL); ++ data |= MII_NS_PHYCTRL_BP_STRETCH; ++ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data); ++ ++ /* Restart auto-negotiation */ ++ data = mdio_read(dev, phy_addr, MII_CONTROL); ++ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; ++ mdio_write(dev, phy_addr, MII_CONTROL, data); ++ ++ return 0; ++ } ++ ++int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) ++ { ++ u16 mii_data; ++ struct au1000_private *aup; ++ ++ if (!dev) { ++ printk(KERN_ERR "ns_83847_status error: NULL dev\n"); ++ return -1; ++ } ++ aup = (struct au1000_private *) dev->priv; ++ ++ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); ++ // printk("ns_status: %04x\n", mii_data); ++ if (mii_data & MII_STAT_LINK) { ++ *link = 1; ++ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS); ++ if (mii_data & MII_NS_PHYSTS_SPEED_10) { ++ *speed = IF_PORT_10BASET; ++ dev->if_port = IF_PORT_10BASET; ++ } ++ else { ++ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) { ++ *speed = IF_PORT_100BASEFX; ++ dev->if_port = IF_PORT_100BASEFX; ++ } ++ else { ++ *speed = IF_PORT_100BASETX; ++ dev->if_port = IF_PORT_100BASETX; ++ } ++ } ++ ++ } ++ else { ++ *link = 0; ++ *speed = 0; ++ dev->if_port = IF_PORT_UNKNOWN; ++ } ++ return 0; ++ } ++ + #ifdef CONFIG_MIPS_BOSPORUS + int stub_init(struct net_device *dev, int phy_addr) + { +@@ -620,6 +711,12 @@ + } + #endif + ++struct phy_ops ns_83847_ops = { ++ ns_83847_init, ++ ns_83847_reset, ++ ns_83847_status, ++}; ++ + struct phy_ops bcm_5201_ops = { + bcm_5201_init, + bcm_5201_reset, +@@ -679,6 +776,7 @@ + {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0}, + {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0}, + {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0}, ++ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops }, + #ifdef CONFIG_MIPS_BOSPORUS + {"Stub", 0x1234, 0x5678, &stub_ops }, + #endif +@@ -872,6 +970,8 @@ + } + } + } ++ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name); ++ return -1; + found: + + #ifdef CONFIG_MIPS_BOSPORUS +diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h +--- linux-2.4.31.org/drivers/net/au1000_eth.h 2004-02-18 08:36:31.000000000 -0500 ++++ linux-2.4.31/drivers/net/au1000_eth.h 2005-08-22 12:31:37.000000000 -0400 +@@ -86,6 +86,27 @@ + #define MII_STAT_CAN_TX_FDX 0x4000 + #define MII_STAT_CAN_T4 0x8000 + ++/* mii registers for NS 83847 */ ++#define MII_NS_PHYSTS 0x10 ++#define MII_NS_FCSCR 0x14 ++#define MII_NS_RECR 0x15 ++#define MII_NS_PCSR 0x16 ++#define MII_NS_PHYCTRL 0x19 ++#define MII_NS_10BTSCR 0x1a ++#define MII_NS_CDCTRL 0x1b ++ ++/* MII_NS_PHYSTS bits */ ++#define MII_NS_PHYSTS_LINK (1) ++#define MII_NS_PHYSTS_SPEED_10 (1<<1) ++#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2) ++ ++/* MII_NS_PHYCTRL bits */ ++#define MII_NS_PHYCTRL_BP_STRETCH (1<<8) ++ ++/* MII_NS_CDCTRL bits */ ++#define MII_NS_CDCTRL_CD_ENABLE (1<<15) ++#define MII_NS_CDCTRL_RISETIME (1<<11) ++#define MII_NS_CDCTRL_FALLTIME (1<<9) + + #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ + #define MII_ID1_MODEL 0x03F0 /* model number */ diff --git a/target/device/jp/q5/kernel-patches-2.4.32/006-cfi b/target/device/jp/q5/kernel-patches-2.4.32/006-cfi new file mode 100644 index 000000000..5a28bd93f --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.32/006-cfi @@ -0,0 +1,27 @@ +diff -Naur linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 06:54:21.000000000 -0500 ++++ linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c 2005-08-22 12:14:17.000000000 -0400 +@@ -510,7 +510,7 @@ + or tells us why it failed. */ + dq6 = CMD(1<<6); + dq5 = CMD(1<<5); +- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ ++ timeo = jiffies + (HZ); /* setting timeout to 1s for now */ + + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); +@@ -950,12 +950,8 @@ + oldstatus = cfi_read( map, adr ); + status = cfi_read( map, adr ); + +- if( ( oldstatus & 0x00FF ) == ( status & 0x00FF ) ) ++ if( ( oldstatus & 0x00FF ) != ( status & 0x00FF ) ) + { +- printk( "Warning: DQ5 raised while erase operation was in progress, but erase completed OK\n" ); +- } +- else +- { + /* DQ5 is active so we can do a reset and stop the erase */ + cfi_write(map, CMD(0xF0), chip->start); + printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" ); + diff --git a/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 b/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 new file mode 100644 index 000000000..d852ac9f6 --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 @@ -0,0 +1,13 @@ +--- linux-2.4.32_old/arch/mips/au1000/common/clocks.c 2005-01-19 15:09:26.000000000 +0100 ++++ linux-2.4.32/arch/mips/au1000/common/clocks.c 2006-01-27 13:51:39.000000000 +0100 +@@ -85,9 +85,7 @@ + lcd_clock = sys_busclk / 4; + + if (lcd_clock > 50000) /* Epson MAX */ +- printk(__FUNCTION__ +- ": warning: LCD clock too high (%d KHz)\n", +- lcd_clock); ++ printk("warning: LCD clock too high (%d KHz)\n", lcd_clock); + } + + unsigned int get_au1x00_lcd_clock(void) diff --git a/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush b/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush new file mode 100644 index 000000000..996b4c666 --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush @@ -0,0 +1,14 @@ +--- linux-2.4.32_old/include/asm-mips/wbflush.h 2006-01-26 15:16:14.000000000 +0100 ++++ linux-2.4.32/include/asm-mips/wbflush.h 2006-01-27 15:25:54.030500656 +0100 +@@ -15,9 +15,8 @@ + + #ifdef CONFIG_CPU_HAS_WB + +-extern void (*__wbflush)(void); +-extern void wbflush_setup(void); +- ++#define __wbflush() { __asm__ volatile ("sync"); } ++ + #define wbflush() \ + do { \ + __sync(); \ diff --git a/target/device/jp/q5/kernel-patches-2.4.32/100-version b/target/device/jp/q5/kernel-patches-2.4.32/100-version new file mode 100644 index 000000000..c20e6a82d --- /dev/null +++ b/target/device/jp/q5/kernel-patches-2.4.32/100-version @@ -0,0 +1,11 @@ +--- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600 ++++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600 +@@ -1,7 +1,7 @@ + VERSION = 2 + PATCHLEVEL = 4 + SUBLEVEL = 32 +-EXTRAVERSION = ++EXTRAVERSION =-q5 + + KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) + diff --git a/target/device/jp/q5/linux.config b/target/device/jp/q5/linux.config index f299cb556..6a1016ef5 100644 --- a/target/device/jp/q5/linux.config +++ b/target/device/jp/q5/linux.config @@ -1,5 +1,5 @@ # -# Automatically generated by make menuconfig: don't edit +# Automatically generated make config: don't edit # CONFIG_MIPS=y CONFIG_MIPS32=y @@ -26,11 +26,13 @@ CONFIG_MODULES=y # CONFIG_MIPS_DB1000 is not set # CONFIG_MIPS_DB1100 is not set # CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set -CONFIG_MIPS_PB1500=y +# CONFIG_MIPS_PB1500 is not set # CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +CONFIG_MIPS_Q5=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -53,6 +55,8 @@ CONFIG_MIPS_PB1500=y # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_BIG_SUR is not set +# CONFIG_PMC_STRETCH is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_DDB5074 is not set # CONFIG_DDB5476 is not set @@ -76,10 +80,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_SOC_AU1X00=y CONFIG_SOC_AU1500=y -CONFIG_NEW_TIME_C=y -CONFIG_PCI=y -CONFIG_NEW_PCI=y -CONFIG_PCI_AUTO=y CONFIG_NONCOHERENT_IO=y CONFIG_PC_KEYB=y # CONFIG_MIPS_AU1000 is not set @@ -120,8 +120,12 @@ CONFIG_CPU_HAS_SYNC=y # General setup # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_BUILD_ELF64 is not set CONFIG_NET=y -CONFIG_PCI_NAMES=y +CONFIG_PCI=y +CONFIG_PCI_NEW=y +CONFIG_PCI_AUTO=y +# CONFIG_PCI_NAMES is not set # CONFIG_ISA is not set # CONFIG_TC is not set # CONFIG_MCA is not set @@ -139,6 +143,10 @@ CONFIG_HOTPLUG=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set +# CONFIG_HOTPLUG_PCI_PCIE is not set +# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y @@ -152,6 +160,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_ELF32 is not set # CONFIG_BINFMT_MISC is not set # CONFIG_OOM_KILLER is not set +# CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # @@ -163,6 +172,10 @@ CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CONCAT=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -202,8 +215,8 @@ CONFIG_MTD_ROM=y # Mapping drivers for chip access # CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=18000000 -CONFIG_MTD_PHYSMAP_LEN=2000000 +CONFIG_MTD_PHYSMAP_START=0x18000000 +CONFIG_MTD_PHYSMAP_LEN=0x2000000 CONFIG_MTD_PHYSMAP_BUSWIDTH=4 # CONFIG_MTD_PB1000 is not set # CONFIG_MTD_PB1500 is not set @@ -221,6 +234,10 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# # CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set @@ -254,6 +271,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 # CONFIG_CISS_MONITOR_THREAD is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set @@ -338,7 +356,6 @@ CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_NAT_LOCAL is not set # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_MANGLE=m @@ -364,13 +381,12 @@ CONFIG_IP_NF_TARGET_LOG=m # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set CONFIG_VLAN_8021Q=y -# CONFIG_IPX is not set -# CONFIG_ATALK is not set # -# Appletalk devices +# # -# CONFIG_DEV_APPLETALK is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set # CONFIG_DECNET is not set CONFIG_BRIDGE=m # CONFIG_X25 is not set @@ -396,7 +412,7 @@ CONFIG_NET_SCH_RED=m # CONFIG_NET_SCH_TEQL is not set CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m -# CONFIG_NET_SCH_DELAY is not set +# CONFIG_NET_SCH_NETEM is not set CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_QOS=y @@ -573,6 +589,11 @@ CONFIG_AIRO=m # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set # CONFIG_PCI_HERMES is not set + +# +# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g) +# +CONFIG_PRISM54=m CONFIG_NET_WIRELESS=y # @@ -665,6 +686,14 @@ CONFIG_UNIX98_PTY_COUNT=256 # Joysticks # # CONFIG_INPUT_GAMEPORT is not set + +# +# Input core support is needed for gameports +# + +# +# Input core support is needed for joysticks +# # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set @@ -681,7 +710,6 @@ CONFIG_UNIX98_PTY_COUNT=256 # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set -# CONFIG_MIPS_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set diff --git a/target/device/jp/q5/linux.mk b/target/device/jp/q5/linux.mk index 32b8c3d07..127db1ae9 100644 --- a/target/device/jp/q5/linux.mk +++ b/target/device/jp/q5/linux.mk @@ -22,7 +22,7 @@ ifneq ($(filter $(TARGETS),linux),) # Base version of Linux kernel that we need to download -DOWNLOAD_LINUX_VERSION=2.4.26 +DOWNLOAD_LINUX_VERSION=2.4.32 # Version of Linux kernel AFTER applying all patches LINUX_VERSION=$(DOWNLOAD_LINUX_VERSION)-q5 @@ -53,7 +53,6 @@ LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4 # Used by pcmcia-cs and others LINUX_SOURCE_DIR=$(LINUX_DIR) - $(DL_DIR)/$(LINUX_SOURCE): -mkdir -p $(DL_DIR) $(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE) @@ -67,6 +66,8 @@ ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION)) mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION) endif toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR) + #New versions of binutils does not have -mcpu, but -mtune. -march is not needed because -mips2 is used + mv $(LINUX_DIR)/arch/mips/Makefile $(LINUX_DIR)/arch/mips/Makefile.org && sed 's/-mcpu/-mtune/g' < $(LINUX_DIR)/arch/mips/Makefile.org > $(LINUX_DIR)/arch/mips/Makefile touch $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG): diff --git a/target/device/jp/q5/uClibc.config.mipsel b/target/device/jp/q5/uClibc.config.mipsel index fe1c4ac68..d0fc762a9 100644 --- a/target/device/jp/q5/uClibc.config.mipsel +++ b/target/device/jp/q5/uClibc.config.mipsel @@ -43,7 +43,7 @@ ARCH_HAS_MMU=y UCLIBC_HAS_FLOATS=y HAS_FPU=y DO_C99_MATH=y -KERNEL_SOURCE="/home/jp/buildroot_jp/build_test/toolchain_build_mipsel/linux" +KERNEL_SOURCE="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/toolchain_build_mipsel/linux" C_SYMBOL_PREFIX="" HAVE_DOT_CONFIG=y @@ -61,6 +61,7 @@ LDSO_LDD_SUPPORT=y LDSO_CACHE_SUPPORT=y # LDSO_PRELOAD_FILE_SUPPORT is not set LDSO_BASE_FILENAME="ld.so" +LDSO_RUNPATH=y # DL_FINI_CRT_COMPAT is not set UCLIBC_CTOR_DTOR=y # HAS_NO_THREADS is not set @@ -115,6 +116,7 @@ UCLIBC_HAS_STDIO_BUFSIZ_4096=y UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y # UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set # UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set +# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set UCLIBC_HAS_STDIO_GETC_MACRO=y UCLIBC_HAS_STDIO_PUTC_MACRO=y UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y @@ -151,8 +153,9 @@ DEVEL_PREFIX="/usr/" # # uClibc development/debugging options # -CROSS_COMPILER_PREFIX="" +CROSS_COMPILER_PREFIX="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/build_mipsel/staging_dir/bin/mipsel-linux-uclibc-" # DODEBUG is not set +# DODEBUG_PT is not set # DOASSERTS is not set # SUPPORT_LD_DEBUG is not set # SUPPORT_LD_DEBUG_EARLY is not set |