diff options
| -rwxr-xr-x | scripts/add_new_package.wizard | 94 | ||||
| -rwxr-xr-x | scripts/build-ext3-img | 152 | ||||
| -rwxr-xr-x | scripts/create_ipkgs | 82 |
3 files changed, 328 insertions, 0 deletions
diff --git a/scripts/add_new_package.wizard b/scripts/add_new_package.wizard new file mode 100755 index 000000000..773343d3f --- /dev/null +++ b/scripts/add_new_package.wizard @@ -0,0 +1,94 @@ +#!/bin/sh + +echo "**** Autotools Add New Package Wizard ****" +echo " This script will generate files to add a" +echo " new package to buildroot." +echo + +echo "What is the name of the package?" +read PACKAGE_NAME + +echo "What is the version number?" +read VERSION_NUM + +echo "What is the web address of the tarball?" +read DOWNLOAD_LOC + +echo "Enter any known dependencies, separated" +echo "by spaces, or just press enter." +read EXTRA_DEPS + +echo "Enter a description of the package." +read DESCRIPTION + +echo "Does autoreconf need to be run first? (y/n)" +read ANSWER + +if [ "$ANSWER" = "y" ]; then + RECONF="YES" +else + RECONF="NO" +fi + +echo "Does it need to be installed to the staging dir?" +echo "Say yes, if other packages depend on it." +echo "(If not sure, just say yes. It will only use more" +echo "space on your hard drive.)" +read ANSWER + +if [ "$ANSWER" = "y" ]; then + STAGING="YES" +else + STAGING="NO" +fi + +echo "Enter any configure script options." +read CONFIG_OPTIONS + +URL=${DOWNLOAD_LOC%/*} +TARBALL=${DOWNLOAD_LOC##*/} +EXTENSION=${TARBALL##*.tar.} +NAME_UPPER=`echo ${PACKAGE_NAME} | tr [a-z] [A-Z]` +NAME_UPPER=${NAME_UPPER//-/_} + +mkdir ../package/${PACKAGE_NAME} + +cat > ../package/${PACKAGE_NAME}/${PACKAGE_NAME}.mk <<EOF +############################################################# +# +# ${PACKAGE_NAME} +# +############################################################# +${NAME_UPPER}_VERSION = ${VERSION_NUM} +${NAME_UPPER}_SOURCE = ${PACKAGE_NAME}-\$(${NAME_UPPER}_VERSION).tar.${EXTENSION} +${NAME_UPPER}_SITE = ${URL} +${NAME_UPPER}_AUTORECONF = ${RECONF} +${NAME_UPPER}_INSTALL_STAGING = ${STAGING} +${NAME_UPPER}_INSTALL_TARGET = YES + +${NAME_UPPER}_CONF_OPT = ${CONFIG_OPTIONS} + +${NAME_UPPER}_DEPENDENCIES = uclibc ${EXTRA_DEPS} + +\$(eval \$(call AUTOTARGETS,package,${PACKAGE_NAME})) + +EOF + +cat > ../package/${PACKAGE_NAME}/Config.in <<EOF +config BR2_PACKAGE_${NAME_UPPER} + bool "${PACKAGE_NAME}" + default n + help + ${DESCRIPTION} + + ${URL} +EOF + +echo "Just add: source \"package/${PACKAGE_NAME}/Config.in\"" +echo "to the file package/Config.in in an appropriate" +echo "location." +echo +echo "You are now ready to build ${PACKAGE_NAME}" +echo "Just run make menuconfig and select your new" +echo "package, then run make." + diff --git a/scripts/build-ext3-img b/scripts/build-ext3-img new file mode 100755 index 000000000..1aabf8c22 --- /dev/null +++ b/scripts/build-ext3-img @@ -0,0 +1,152 @@ +#!/bin/sh + +BLOCKSIZE=516096 +WORKING_DIR=`pwd` + +echo "This script will create a bootable ext3 image from buildroot." + +echo "Enter the path to the image (${WORKING_DIR})" +read IMG_PATH + +if [ "${IMAGE_PATH}" = "" ]; then + IMAGE_PATH=${WORKING_DIR} +fi + +echo "Enter the name of the image file (buildroot.img)" +read IMG_NAME + +if [ "${IMAGE_NAME}" = "" ]; then + IMAGE_NAME="buildroot.img" +fi + +IMAGE=${IMAGE_PATH}/${IMAGE_NAME} + +echo "Enter the path to the root filesystem that you want" +echo "to install to the image" +read ROOT_PATH + +if [ "${ROOT_PATH}" = "" ]; then + echo "Error: you must specify a path." + exit 1 +fi + +CYLINDERS=`du --summarize --block-size=${BLOCKSIZE} ${ROOT_PATH}` +BYTE_SIZE=`du --summarize --block-size=${BLOCKSIZE} --human-readable ${ROOT_PATH}` + +CYLINDERS=${CYLINDERS%${ROOT_PATH}} +BYTE_SIZE=${BYTE_SIZE%${ROOT_PATH}} + +CYLINDERS=`expr ${CYLINDERS} "+" 2` + +echo "Now I will create an ext3 image file" +echo "using ${CYLINDERS} cylinders, with ${BLOCKSIZE} bytes per block" +echo "in other words, ${BYTE_SIZE}bytes..." + + dd if=/dev/zero of=${IMAGE} bs=${BLOCKSIZE}c count=${CYLINDERS} + +# Create file partition and filesystem + + # STEP 1. create partition + /sbin/losetup /dev/loop3 ${IMAGE} + # probably should figure out how to use GNU parted to do this non-interactively + /sbin/fdisk -u -C${CYLINDERS} -S63 -H16 /dev/loop3 + /sbin/losetup -d /dev/loop3 + + # STEP 2. make file system (ext3) + /sbin/losetup -o 32256 /dev/loop3 ${IMAGE} + /sbin/mkfs.ext3 /dev/loop3 + /sbin/losetup -d /dev/loop3 + +# Install Software to the image + mkdir -p ${IMAGE_PATH}/temp + mount -o offset=32256,loop ${IMAGE} ${IMAGE_PATH}/temp + cp -a ${ROOT_PATH}/* ${IMAGE_PATH}/temp + # make sure to unmount the image + umount ${IMAGE_PATH}/temp + rm -rf ${IMAGE_PATH}/temp + +# Create a VMware .vmx file +cat > ${IMAGE_PATH}/buildroot.vmx <<EOF +config.version = "8" +virtualHW.version = "3" + +uuid.location = "56 4d 5c cc 3d 4a 43 29-55 89 5c 28 1e 7e 06 58" +uuid.bios = "56 4d 5c cc 3d 4a 43 29-55 89 5c 28 1e 7e 06 58" + +uuid.action = "create" +checkpoint.vmState = "" + +displayName = "Buildroot" +annotation = "" +guestinfo.vmware.product.long = "" +guestinfo.vmware.product.url = "http://dcgrendel.be/vmbuilder/" + +guestOS = "linux" +numvcpus = "1" +memsize = "256" +paevm = "FALSE" +sched.mem.pshare.enable = "TRUE" +MemAllowAutoScaleDown = "FALSE" + +MemTrimRate = "-1" + +nvram = "nvram" + +mks.enable3d = "FALSE" +vmmouse.present = "TRUE" + +tools.syncTime = "TRUE" +tools.remindinstall = "FALSE" + +isolation.tools.hgfs.disable = "FALSE" +isolation.tools.dnd.disable = "FALSE" +isolation.tools.copy.enable = "TRUE" +isolation.tools.paste.enabled = "TRUE" +gui.restricted = "FALSE" + +ethernet0.present = "TRUE" +ethernet0.connectionType = "bridged" +ethernet0.addressType = "generated" +ethernet0.generatedAddress = "00:0c:29:7e:06:58" +ethernet0.generatedAddressOffset = "0" + +usb.present = "TRUE" +usb.generic.autoconnect = "FALSE" + +sound.present = "TRUE" +sound.virtualdev = "es1371" + +ide0:0.present = "TRUE" +ide0:0.fileName = "buildroot.vmdk" +ide0:0.deviceType = "disk" +ide0:0.mode = "" +ide0:0.redo = "" +ide0:0.writeThrough = "FALSE" +ide0:0.startConnected = "TRUE" + +ide1:0.present = "TRUE" +ide1:0.fileName = "" +ide1:0.deviceType = "disk" +ide1:0.mode = "" +ide1:0.redo = "" +ide1:0.writeThrough = "FALSE" +ide1:0.startConnected = "FALSE" + +floppy0.present = "FALSE" + +serial0.present = "FALSE" + +serial1.present = "FALSE" + +parallel0.present = "FALSE" + +EOF + +# Install GRUB + /sbin/grub --no-floppy --batch <<EOT + device (hd0) ${IMAGE} + geometry (hd0) ${CYLINDERS} 16 63 + root (hd0,0) + setup (hd0) + quit + EOT diff --git a/scripts/create_ipkgs b/scripts/create_ipkgs new file mode 100755 index 000000000..3b9b8af39 --- /dev/null +++ b/scripts/create_ipkgs @@ -0,0 +1,82 @@ +#!/bin/sh + +# this script is very *alpha* so be gentle... + +# change these lines to your arch and maintainer name +ARCH="avr32" +PACK_MAINTAINER="John Voltz <john.voltz@gmail.com>" + +BUILDROOT_DIR=`pwd` + +echo "Creating ipkgs from your build directory..." +echo "Please be patient, as this can take a long time. + " + +# create the ipkg directories +mkdir -p ${BUILDROOT_DIR}/ipkg-temp +mkdir -p ${BUILDROOT_DIR}/ipkg-out + +for PACKAGE in `ls -d ./build_*/*`; do + + # extract some info + NAME_WITHOUT_VER=${PACKAGE%-*} + VERSION=${PACKAGE#${NAME_WITHOUT_VER}-} + NAME_WITHOUT_DIR=${NAME_WITHOUT_VER#*/*/} + CLEAN_NAME=${NAME_WITHOUT_DIR//_/-} + + # clean out the temp directory + rm -rf ${BUILDROOT_DIR}/ipkg-temp/* + + # install the package to temp directory + cd ${PACKAGE} + echo "Installing ${NAME_WITHOUT_DIR} to ./ipkg-temp" + make DESTDIR=${BUILDROOT_DIR}/ipkg-temp DSTROOT=${BUILDROOT_DIR}/ipkg-temp install &> /dev/null + + # create the control file + cd ${BUILDROOT_DIR} + mkdir ${BUILDROOT_DIR}/ipkg-temp/CONTROL + + # find it's corresponding buildroot package directory + PACK_NAME=`find ./package -path './package/config' -prune -o -name ${NAME_WITHOUT_DIR}` + PACK_NAME=${PACK_NAME%./package/config} + PACK_NAME=${PACK_NAME#./package/config} + PACK_NAME=`echo -n ${PACK_NAME}` + + # there must be an better way to extract the description and + # dependencies from the Config.in and *.mk file. + # Haven't figured it out just yet. + CONF_FILE=`cat ${PACK_NAME}/Config.in` + #MAKE_FILE=`cat ${PACK_NAME}/*.mk` + HELP_STR=${CONF_FILE#*help} + HELP_STR=${HELP_STR%%comment*} + HELP_STR=${HELP_STR%%choice*} + HELP_STR=${HELP_STR%%depends*} + HELP_STR=${HELP_STR%%http*} + HELP_STR=`echo -n ${HELP_STR}` + + echo ${HELP_STR} + + if [ "${PACK_NAME}" != "" ]; then + echo "Creating ipkg of: ${PACKAGE}" + +cat > ${BUILDROOT_DIR}/ipkg-temp/CONTROL/control <<EOF +Package: ${CLEAN_NAME} +Priority: optional +Version: ${VERSION} +Architecture: ${ARCH} +Maintainer: ${PACK_MAINTAINER} +Depends: uclibc +Description: ${HELP_STR} +EOF + + # build the package + package/ipkg/ipkg-build ${BUILDROOT_DIR}/ipkg-temp ${BUILDROOT_DIR}/ipkg-out + + fi + + echo "Complete. + " + +done + +echo "ipkg builds are finished." |