summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xpackage/udev/init-udev76
1 files changed, 76 insertions, 0 deletions
diff --git a/package/udev/init-udev b/package/udev/init-udev
new file mode 100755
index 000000000..4f424950f
--- /dev/null
+++ b/package/udev/init-udev
@@ -0,0 +1,76 @@
+#!/bin/sh
+#
+# udev This is a minimal non-LSB version of a UDEV startup script. It
+# was derived by stripping down the udev-058 LSB version for use
+# with buildroot on embedded hardware using Linux 2.6.12+ kernels.
+#
+# You may need to customize this for your system's resource limits
+# (including startup time!) and administration. For example, if
+# your early userspace has a custom initramfs or initrd you might
+# need /dev much earlier; or without hotpluggable busses (like USB,
+# PCMCIA, MMC/SD, and so on) your /dev might be static after boot.
+#
+# This script assumes your system boots right into the eventual root
+# filesystem, and that init runs this udev script before any programs
+# needing more device nodes than the bare-bones set -- /dev/console,
+# /dev/zero, /dev/null -- that's needed to boot and run this script.
+#
+
+# old kernels don't use udev
+case $(uname -r) in
+2.6*|2.7*) ;;
+*) exit 0;;
+esac
+
+# Check for missing binaries
+UDEV_BIN=/sbin/udev
+test -x $UDEV_BIN || exit 5
+UDEVSTART_BIN=/sbin/udevstart
+test -x $UDEVSTART_BIN || exit 5
+
+# Check for config file and read it
+UDEV_CONFIG=/etc/udev/udev.conf
+test -r $UDEV_CONFIG || exit 6
+. $UDEV_CONFIG
+
+# Directory where sysfs is mounted
+SYSFS_DIR=/sys
+
+case "$1" in
+ start)
+ # mount sysfs if it's not yet mounted
+ if [ ! -d $SYSFS_DIR ]; then
+ echo "${0}: SYSFS_DIR \"$SYSFS_DIR\" not found"
+ exit 1
+ fi
+ grep -q "^sysfs $SYSFS_DIR" /proc/mounts ||
+ mount -t sysfs /sys /sys ||
+ exit 1
+
+ # mount $udev_root as ramfs if it's not yet mounted
+ # we know 2.6 kernels always support ramfs
+ if [ ! -d $udev_root ]; then
+ echo "${0}: udev_root \"$udev_root\" not found"
+ exit 1
+ fi
+ grep -q "^udev $udev_root" /proc/mounts ||
+ mount -t ramfs udev $udev_root ||
+ exit 1
+
+ # heck, go whole-hog: use only new style hotplug
+ # echo $UDEV_BIN > /proc/sys/kernel/hotplug
+
+ # populate /dev (normally)
+ echo -n "Populating $udev_root using udev... "
+ $UDEVSTART_BIN || (echo "FAIL" && exit 1)
+ mkdir $udev_root/pts $udev_root/shm
+ echo "done"
+ ;;
+ stop)
+ # do nothing
+ ;;
+ *)
+ echo "Usage: $0 {start|stop}"
+ exit 1
+ ;;
+esac