Add AT91 support for 2.6.27.7 and 2.6.28-rc6

4 files changed, 437 insertions, 4 deletions

diff --git a/target/device/Atmel/arch-arm/Config.in.linux.patches b/target/device/Atmel/arch-arm/Config.in.linux.patches
index 044d8c81f..8664c6a45 100644
--- a/target/device/Atmel/arch-arm/Config.in.linux.patches
+++ b/target/device/Atmel/arch-arm/Config.in.linux.patches
@@ -2,6 +2,8 @@ choice
 	prompt "Add AT91 specific patches"
 	depends on BR2_KERNEL_ARCH_PATCH_ENABLED
 	depends on BR2_TARGET_ATMEL && BR2_arm
+	default BR2_ARCH_AT91_2_6_28_RC6	if BR2_LINUX_2_6_28
+	default BR2_ARCH_AT91_2_6_27_7		if BR2_LINUX_2_6_27
 	default BR2_ARCH_AT91_2_6_26		if BR2_LINUX_2_6_26
 	default BR2_ARCH_AT91_2_6_25		if BR2_LINUX_2_6_25
 	default BR2_ARCH_AT91_2_6_24		if BR2_LINUX_2_6_24
@@ -14,6 +16,16 @@ choice
 	help
 	  Select a patch to add to the Linux kernel
 
+config	BR2_ARCH_AT91_2_6_28_RC6
+	bool "2.6.28-rc6"
+	help
+	  Apply the at91 linux-2.6.28-rc6 patches
+
+config	BR2_ARCH_AT91_2_6_27_7
+	bool "2.6.27.7"
+	help
+	  Apply the at91 linux-2.6.27.7 patches
+
 config	BR2_ARCH_AT91_2_6_26
 	bool "2.6.26"
 	help
@@ -60,6 +72,8 @@ config	BR2_KERNEL_ARCH_PATCH_VERSION
 	string
 	depends on BR2_KERNEL_ARCH_PATCH_ENABLED
 	depends on BR2_TARGET_ATMEL && BR2_arm
+	default "2.6.28-rc6" if BR2_ARCH_AT91_2_6_28_RC6
+	default "2.6.27.7" if BR2_ARCH_AT91_2_6_27_7
 	default "2.6.26" if BR2_ARCH_AT91_2_6_26
 	default "2.6.26-rc3" if BR2_ARCH_AT91_2_6_26_RC3
 	default "2.6.25" if BR2_ARCH_AT91_2_6_25
@@ -72,7 +86,3 @@ config	BR2_KERNEL_ARCH_PATCH_VERSION
 config	BR2_KERNEL_ARCH_PATCH_DIR
 	string
 	default "target/device/Atmel/arch-arm/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
-
-
-
-
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.27.7/2.6.27-at91.patch.gz b/target/device/Atmel/arch-arm/kernel-patches-2.6.27.7/2.6.27-at91.patch.gz
new file mode 100644
index 000000000..8acde845b
--- /dev/null
+++ b/target/device/Atmel/arch-arm/kernel-patches-2.6.27.7/2.6.27-at91.patch.gz
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.28-rc6/2.6.28-rc6-at91-wm8731.patch b/target/device/Atmel/arch-arm/kernel-patches-2.6.28-rc6/2.6.28-rc6-at91-wm8731.patch
new file mode 100644
index 000000000..4c0a0a289
--- /dev/null
+++ b/target/device/Atmel/arch-arm/kernel-patches-2.6.28-rc6/2.6.28-rc6-at91-wm8731.patch
@@ -0,0 +1,423 @@
+diff -urN linux-2.6.28-rc6/sound/soc/at91/at91sam9g20ek_wm8731.c linux-2.6.28-rc6-0rig/sound/soc/at91/at91sam9g20ek_wm8731.c
+--- linux-2.6.28-rc6/sound/soc/at91/at91sam9g20ek_wm8731.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.28-rc6-0rig/sound/soc/at91/at91sam9g20ek_wm8731.c	2008-11-29 20:33:23.000000000 +0100
+@@ -0,0 +1,383 @@
++/*
++ * at91sam9g20ek_wm8731  --  SoC audio for AT91SAM9G20-based Atmel AT91SAM9G20EK board.
++ *
++ * Author:	Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *		Atmel Nordic AB.
++ * Created:	Mar 29, 2006
++ *
++ * Based on eti_b1_wm8731.c by:
++ *
++ * Authors: Frank Mandarino <fmandarino@endrelia.com>
++ *
++ * which is based on corgi.c by:
++ *
++ * Copyright 2005 Wolfson Microelectronics PLC.
++ * Copyright 2005 Openedhand Ltd.
++ *
++ * Authors: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
++ *          Richard Purdie <richard@openedhand.com>
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/kernel.h>
++#include <linux/clk.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <mach/hardware.h>
++#include <mach/gpio.h>
++
++#include "../codecs/wm8731.h"
++#include "at91-pcm.h"
++#include "at91-ssc.h"
++
++#define	AT91SAM9G20_BASE_SSC AT91SAM9260_BASE_SSC
++#define	AT91SAM9G20_ID_SSC AT91SAM9260_ID_SSC
++
++
++#if 0
++#define	DBG(x...)	printk(KERN_INFO "at91sam9g20ek_wm8731: " x)
++#else
++#define	DBG(x...)
++#endif
++
++static struct clk *pck1_clk;
++static struct clk *pllb_clk;
++
++
++static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++	int ret;
++
++	/* cpu clock is the AT91 master clock sent to the SSC */
++	ret = snd_soc_dai_set_sysclk(cpu_dai, AT91_SYSCLK_MCK,
++		100000000, SND_SOC_CLOCK_IN);
++	if (ret < 0)
++		return ret;
++
++	/* codec system clock is supplied by PCK1, set to 12MHz */
++	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
++		12000000, SND_SOC_CLOCK_IN);
++	if (ret < 0)
++		return ret;
++
++	/* Start PCK1 clock. */
++	clk_enable(pck1_clk);
++	DBG("pck1 started\n");
++
++	return 0;
++}
++
++static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
++{
++	/* Stop PCK1 clock. */
++	clk_disable(pck1_clk);
++	DBG("pck1 stopped\n");
++}
++
++static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
++	struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
++	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
++	int ret;
++
++#ifdef CONFIG_SND_AT91_SOC_AT91SAM9G20EK_SLAVE
++	unsigned int rate;
++	int cmr_div, period;
++
++	/* set codec DAI configuration */
++	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
++		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
++	if (ret < 0)
++		return ret;
++
++	/* set cpu DAI configuration */
++	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
++		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
++	if (ret < 0)
++		return ret;
++
++	/*
++	 * The SSC clock dividers depend on the sample rate.  The CMR.DIV
++	 * field divides the system master clock MCK to drive the SSC TK
++	 * signal which provides the codec BCLK.  The TCMR.PERIOD and
++	 * RCMR.PERIOD fields further divide the BCLK signal to drive
++	 * the SSC TF and RF signals which provide the codec DACLRC and
++	 * ADCLRC clocks.
++	 *
++	 * The dividers were determined through trial and error, where a
++	 * CMR.DIV value is chosen such that the resulting BCLK value is
++	 * divisible, or almost divisible, by (2 * sample rate), and then
++	 * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
++	 */
++
++	/*
++         *  8000:       P=25    D=124   IF=2000000.00   OF= 8000.00     ERROR=0.000000
++         * 16000:       P=22    D=70    IF=2272727.27   OF=16005.12     ERROR=0.000320
++         * 32000:       P=17    D=45    IF=2941176.47   OF=31969.31     ERROR=0.000959
++         * 48000:       P=13    D=39    IF=3846153.85   OF=48076.92     ERROR=0.001603
++         * 11025:       P=14    D=161   IF=3571428.57   OF=11022.93     ERROR=0.000188
++         * 22050:       P=14    D=80    IF=3571428.57   OF=22045.86     ERROR=0.000188
++         * 44100:       P=21    D=26    IF=2380952.38   OF=44091.71     ERROR=0.000188
++	 */
++	rate = params_rate(params);
++
++	switch (rate) {
++	case 8000:
++		cmr_div = 25;	/* BCLK = 100MHz/(2*25)  = 2.000000MHz */
++		period = 124;	/* LRC = BCLK/(2*(124+1)) = 8000Hz */
++		break;
++	case 16000:
++		cmr_div = 22;	/* BCLK = 100MHz/(2*22) ~= 2,272727MHz */
++		period = 70;	/* LRC = BCLK/(2*(70+1)) = 16005.12Hz */
++		break;
++	case 32000:
++		cmr_div = 17;	/* BCLK = 100MHz/(2*17) ~= 2.941176MHz */
++		period = 45;	/* LRC = BCLK/(2*(45+1)) = 31969.31Hz */
++		break;
++	case 48000:
++		cmr_div = 13;	/* BCLK = 100MHz/(2*13) ~= 3.846154MHz */
++		period = 39;	/* LRC = BCLK/(2*(39+1)) = 48076.92Hz */
++		break;
++	case 11025:
++		cmr_div = 14;	/* BCLK = 100MHz/(2*14) ~= 3.571429MHz */
++		period = 161;	/* LRC = BCLK/(2*(161+1)) = 11022.93Hz */
++		break;
++	case 22050:
++		cmr_div = 14;	/* BCLK = 100MHz/(2*14) ~= 3.571429MHz */
++		period = 80;	/* LRC = BCLK/(2*(80+1)) = 22045.86Hz */
++		break;
++	case 44100:
++		cmr_div = 21;	/* BCLK = 100MHz/(2*21) ~= 2.380952MHz */
++		period = 26;	/* LRC = BCLK/(2*(26+1)) = 44091.71Hz */
++		break;
++	default:
++		printk(KERN_WARNING "unsupported rate %d on AT91SAM9G20EK board\n", rate);
++		return -EINVAL;
++	}
++
++	/* set the MCK divider for BCLK */
++	ret = snd_soc_dai_set_clkdiv(cpu_dai, AT91SSC_CMR_DIV, cmr_div);
++	if (ret < 0)
++		return ret;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++		/* set the BCLK divider for DACLRC */
++		ret = snd_soc_dai_set_clkdiv(cpu_dai,
++						AT91SSC_TCMR_PERIOD, period);
++	} else {
++		/* set the BCLK divider for ADCLRC */
++		ret = snd_soc_dai_set_clkdiv(cpu_dai,
++						AT91SSC_RCMR_PERIOD, period);
++	}
++	if (ret < 0)
++		return ret;
++
++#else /* CONFIG_SND_AT91_SOC_AT91SAM9G20EK_SLAVE */
++	/*
++	 * Codec in Master Mode.
++	 */
++
++	/* set codec DAI configuration */
++	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
++		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
++	if (ret < 0)
++		return ret;
++
++	/* set cpu DAI configuration */
++	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
++		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
++	if (ret < 0)
++		return ret;
++
++#endif /* CONFIG_SND_AT91_SOC_AT91SAM9G20EK_SLAVE */
++
++	return 0;
++}
++
++static struct snd_soc_ops at91sam9g20ek_ops = {
++	.startup = at91sam9g20ek_startup,
++	.hw_params = at91sam9g20ek_hw_params,
++	.shutdown = at91sam9g20ek_shutdown,
++};
++
++
++static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
++	SND_SOC_DAPM_MIC("Int Mic", NULL),
++	SND_SOC_DAPM_SPK("Ext Spk", NULL),
++};
++
++static const struct snd_soc_dapm_route intercon[] = {
++
++	/* speaker connected to LHPOUT */
++	{"Ext Spk", NULL, "LHPOUT"},
++
++	/* mic is connected to Mic Jack, with WM8731 Mic Bias */
++	{"MICIN", NULL, "Mic Bias"},
++	{"Mic Bias", NULL, "Int Mic"},
++};
++
++/*
++ * Logic for a wm8731 as connected on a Atmel AT91SAM9G20EK board.
++ */
++static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
++{
++	DBG("at91sam9g20ek_wm8731_init() called\n");
++
++	/* Add specific widgets */
++	snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
++				  ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
++
++	/* Set up specific audio path interconnects */
++	snd_soc_dapm_add_route(codec, intercon, ARRAY_SIZE(intercon));
++
++	/* not connected */
++	snd_soc_dapm_disable_pin(codec, "RLINEIN");
++	snd_soc_dapm_disable_pin(codec, "LLINEIN");
++
++	/* always connected */
++	snd_soc_dapm_enable_pin(codec, "Int Mic");
++	snd_soc_dapm_enable_pin(codec, "Ext Spk");
++
++	snd_soc_dapm_sync(codec);
++
++	return 0;
++}
++
++static struct snd_soc_dai_link at91sam9g20ek_dai = {
++	.name = "WM8731",
++	.stream_name = "WM8731 PCM",
++	.cpu_dai = &at91_ssc_dai[1],
++	.codec_dai = &wm8731_dai,
++	.init = at91sam9g20ek_wm8731_init,
++	.ops = &at91sam9g20ek_ops,
++};
++
++static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = {
++	.name = "AT91SAM9G20EK_WM8731",
++	.dai_link = &at91sam9g20ek_dai,
++	.num_links = 1,
++};
++
++static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = {
++	.i2c_address = 0x1a,
++};
++
++static struct snd_soc_device at91sam9g20ek_snd_devdata = {
++	.machine = &snd_soc_machine_at91sam9g20ek,
++	.platform = &at91_soc_platform,
++	.codec_dev = &soc_codec_dev_wm8731,
++	.codec_data = &at91sam9g20ek_wm8731_setup,
++};
++
++static struct platform_device *at91sam9g20ek_snd_device;
++
++static int __init at91sam9g20ek_init(void)
++{
++	int ret;
++	struct at91_ssc_periph *ssc = at91sam9g20ek_dai.cpu_dai->private_data;
++
++	if (!request_mem_region(AT91SAM9G20_BASE_SSC, SZ_16K, "soc-audio")) {
++		DBG("SSC memory region is busy\n");
++		return -EBUSY;
++	}
++
++	ssc->base = ioremap(AT91SAM9G20_BASE_SSC, SZ_16K);
++	if (!ssc->base) {
++		DBG("SSC memory ioremap failed\n");
++		ret = -ENOMEM;
++		goto fail_release_mem;
++	}
++
++	ssc->pid = AT91SAM9G20_ID_SSC;
++
++	at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
++	if (!at91sam9g20ek_snd_device) {
++		DBG("platform device allocation failed\n");
++		ret = -ENOMEM;
++		goto fail_io_unmap;
++	}
++
++	platform_set_drvdata(at91sam9g20ek_snd_device, &at91sam9g20ek_snd_devdata);
++	at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev;
++
++	ret = platform_device_add(at91sam9g20ek_snd_device);
++	if (ret) {
++		DBG("platform device add failed\n");
++		platform_device_put(at91sam9g20ek_snd_device);
++		goto fail_io_unmap;
++	}
++
++	at91_set_A_periph(AT91_PIN_PB16, 0);	/* TK0 */
++	at91_set_A_periph(AT91_PIN_PB17, 0);	/* TF0 */
++	at91_set_A_periph(AT91_PIN_PB18, 0);	/* TD0 */
++#if 0	/* Bidirectional support not available on the SAM9G20EK */
++	at91_set_A_periph(AT91_PIN_PB19, 0);	/* RD0 */
++	at91_set_A_periph(AT91_PIN_PB20, 0);	/* RK0 */
++	at91_set_A_periph(AT91_PIN_PB21, 0);	/* RF0 */
++#endif
++	/*
++	 * Set PCK1 parent to PLLB and its rate to 12 Mhz.
++	 */
++	pllb_clk = clk_get(NULL, "pllb");
++	pck1_clk = clk_get(NULL, "pck1");
++
++	clk_set_parent(pck1_clk, pllb_clk);
++	clk_set_rate(pck1_clk, 12000000);
++
++	DBG("MCLK rate %luHz\n", clk_get_rate(pck1_clk));
++
++	/* assign the GPIO pin to PCK1 */
++	at91_set_B_periph(AT91_PIN_PC1, 0);
++
++#ifdef CONFIG_SND_AT91_SOC_AT91SAM9G20EK_SLAVE
++	printk(KERN_INFO "at91sam9g20ek_wm8731: Codec in Slave Mode\n");
++#else
++	printk(KERN_INFO "at91sam9g20ek_wm8731: Codec in Master Mode\n");
++#endif
++	return ret;
++
++fail_io_unmap:
++	iounmap(ssc->base);
++fail_release_mem:
++	release_mem_region(AT91SAM9G20_BASE_SSC, SZ_16K);
++	return ret;
++}
++
++static void __exit at91sam9g20ek_exit(void)
++{
++	struct at91_ssc_periph *ssc = at91sam9g20ek_dai.cpu_dai->private_data;
++
++	clk_put(pck1_clk);
++	clk_put(pllb_clk);
++
++	platform_device_unregister(at91sam9g20ek_snd_device);
++
++	iounmap(ssc->base);
++	release_mem_region(AT91SAM9G20_BASE_SSC, SZ_16K);
++}
++
++module_init(at91sam9g20ek_init);
++module_exit(at91sam9g20ek_exit);
++
++/* Module information */
++MODULE_AUTHOR("Ulf Samuelsson <ulf.samuelsson@atmel.com>");
++MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK-WM8731");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.28-rc6/sound/soc/at91/Kconfig linux-2.6.28-rc6-0rig/sound/soc/at91/Kconfig
+--- linux-2.6.28-rc6/sound/soc/at91/Kconfig	2008-10-10 00:13:53.000000000 +0200
++++ linux-2.6.28-rc6-0rig/sound/soc/at91/Kconfig	2008-11-29 20:39:30.000000000 +0100
+@@ -25,3 +25,20 @@
+ 	help
+ 	  Say Y if you want to run with the AT91 SSC generating the BCLK
+ 	  and LRC signals on Endrelia boards.
++
++config SND_AT91_SOC_AT91SAM9G20EK_WM8731
++	tristate "SoC Audio support for WM8731-based Atmel AT91SAM9G20EK boards"
++	depends on SND_AT91_SOC && (MACH_AT91SAM9G20EK)
++	select SND_AT91_SOC_SSC
++	select SND_SOC_WM8731
++	help
++	  Say Y if you want to add support for SoC audio on WM8731-based
++	  Atmel AT91SAM9G20EK boards.
++
++config SND_AT91_SOC_AT91SAM9G20EK_SLAVE
++	bool "Run codec in slave Mode on the AT91SAM92G20EK board"
++	depends on SND_AT91_SOC_AT91SAM9G20EK_WM8731
++	default n
++	help
++	  Say Y if you want to run with the AT91 SSC generating the BCLK
++	  and LRC signals on Atmel boards.
+diff -urN linux-2.6.28-rc6/sound/soc/at91/Makefile linux-2.6.28-rc6-0rig/sound/soc/at91/Makefile
+--- linux-2.6.28-rc6/sound/soc/at91/Makefile	2008-10-10 00:13:53.000000000 +0200
++++ linux-2.6.28-rc6-0rig/sound/soc/at91/Makefile	2008-11-29 20:39:35.000000000 +0100
+@@ -7,5 +7,8 @@
+ 
+ # AT91 Machine Support
+ snd-soc-eti-b1-wm8731-objs := eti_b1_wm8731.o
++snd-soc-at91sam9g20ek-wm8731-objs := at91sam9g20ek_wm8731.o
+ 
+ obj-$(CONFIG_SND_AT91_SOC_ETI_B1_WM8731) += snd-soc-eti-b1-wm8731.o
++obj-$(CONFIG_SND_AT91_SOC_AT91SAM9G20_WM8731) += snd-soc-at91sam9g20ek-wm8731.o
++
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.28-rc6/2.6.28-rc6-at91.patch.gz b/target/device/Atmel/arch-arm/kernel-patches-2.6.28-rc6/2.6.28-rc6-at91.patch.gz
new file mode 100644
index 000000000..f44dfe178
--- /dev/null
+++ b/target/device/Atmel/arch-arm/kernel-patches-2.6.28-rc6/2.6.28-rc6-at91.patch.gz