summaryrefslogtreecommitdiffstats
path: root/target/u-boot
diff options
context:
space:
mode:
authorUlf Samuelsson <ulf.samuelsson@atmel.com>2009-01-06 16:21:36 +0000
committerUlf Samuelsson <ulf.samuelsson@atmel.com>2009-01-06 16:21:36 +0000
commit756b2f1f98f39b7015322489028df3d14d0531ff (patch)
treeca007db0479b2c7b34ee8333da2b691d89634f43 /target/u-boot
parentce5971ecca440d32185c1ec1d5b9c0e670b7e7a8 (diff)
downloadbuildroot-novena-756b2f1f98f39b7015322489028df3d14d0531ff.tar.gz
buildroot-novena-756b2f1f98f39b7015322489028df3d14d0531ff.zip
Remove patches that should not have been inlcuded in the spimux commit
Diffstat (limited to 'target/u-boot')
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch77
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch130
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch3866
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch412
4 files changed, 0 insertions, 4485 deletions
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch
deleted file mode 100644
index c2f709c70..000000000
--- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-012-ethinit.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-diff -urN u-boot-2009.01-0rig//common/cmd_ethinit.c u-boot-2009.01/common/cmd_ethinit.c
---- u-boot-2009.01-0rig//common/cmd_ethinit.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/common/cmd_ethinit.c 2009-01-04 00:28:39.000000000 +0100
-@@ -0,0 +1,62 @@
-+/*
-+ * (C) Copyright 2000
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <net.h>
-+#ifdef CONFIG_CMD_ETHINIT
-+extern int eth_init (bd_t * bd);
-+
-+static void delay(void)
-+{
-+}
-+/*
-+ * This command allows you to delay booting until you have a
-+ * valid Ethernet connection.
-+ * Neccessary if you want to NFS mount a rootfs etc.
-+ * When both this target and the NFS server
-+ * are powered on at the same time, then the NFS
-+ * server can take a long time to boot.
-+ */
-+int do_ethinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+ int i;
-+ DECLARE_GLOBAL_DATA_PTR;
-+ while(eth_init (gd->bd) == 0) {
-+ for(i = 0; i < 10000000; i ++) {
-+ delay();
-+ }
-+ }
-+ return 0;
-+}
-+
-+U_BOOT_CMD(
-+ ethinit, 1, 1, do_ethinit,
-+ "ethinit\t- Initialize Ethernet controller\n",
-+ "\n"
-+);
-+
-+#endif /* CONFIG_CMD_ETHINIT */
-diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
---- u-boot-2009.01-0rig//common/Makefile 2009-01-04 00:22:06.000000000 +0100
-+++ u-boot-2009.01/common/Makefile 2009-01-04 00:29:46.000000000 +0100
-@@ -83,6 +83,7 @@
- COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
- COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
- COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
-+COBJS-$(CONFIG_CMD_ETHINIT) += cmd_ethinit.o
- COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
- COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o
- COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch
deleted file mode 100644
index e65645b69..000000000
--- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-013-configs.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-diff -urN u-boot-2009.01-0rig//include/configs/at91cap9adk.h u-boot-2009.01/include/configs/at91cap9adk.h
---- u-boot-2009.01-0rig//include/configs/at91cap9adk.h 2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91cap9adk.h 2009-01-04 00:43:58.000000000 +0100
-@@ -69,7 +69,9 @@
- #define CONFIG_ATMEL_LCD 1
- #define CONFIG_ATMEL_LCD_BGR555 1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
--
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_BOOTDELAY 3
-
- /*
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200df.h 2009-01-02 17:37:43.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200df.h 2009-01-04 00:43:33.000000000 +0100
-@@ -123,6 +123,9 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
- #define CONFIG_CMD_ETHINIT
-
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h 2009-01-02 10:03:11.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-04 00:42:52.000000000 +0100
-@@ -122,7 +122,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
-+#define CONFIG_CMD_ETHINIT
-
- #define CONFIG_NAND_LEGACY
-
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200dk.h 2009-01-02 10:03:11.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-04 00:43:15.000000000 +0100
-@@ -120,7 +120,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
-+#define CONFIG_CMD_ETHINIT
-
- #define CONFIG_NAND_LEGACY
-
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200ek.h 2009-01-02 17:37:43.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200ek.h 2009-01-04 00:42:35.000000000 +0100
-@@ -121,9 +121,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
- #define CONFIG_CMD_ETHINIT
--
- #define CONFIG_NAND_LEGACY
-
- #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9260ek.h u-boot-2009.01/include/configs/at91sam9260ek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9260ek.h 2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9260ek.h 2009-01-04 00:41:56.000000000 +0100
-@@ -74,10 +74,13 @@
- #include <config_cmd_default.h>
- #undef CONFIG_CMD_BDI
- #undef CONFIG_CMD_IMI
--#undef CONFIG_CMD_AUTOSCRIPT
-+#define CONFIG_CMD_AUTOSCRIPT
- #undef CONFIG_CMD_FPGA
- #undef CONFIG_CMD_LOADS
- #undef CONFIG_CMD_IMLS
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
-
- #define CONFIG_CMD_PING 1
- #define CONFIG_CMD_DHCP 1
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9261ek.h u-boot-2009.01/include/configs/at91sam9261ek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9261ek.h 2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9261ek.h 2009-01-04 00:44:11.000000000 +0100
-@@ -68,6 +68,9 @@
- #define CONFIG_ATMEL_LCD 1
- #define CONFIG_ATMEL_LCD_BGR555 1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
-
- #define CONFIG_BOOTDELAY 3
-
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9263ek.h u-boot-2009.01/include/configs/at91sam9263ek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9263ek.h 2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9263ek.h 2009-01-04 00:44:34.000000000 +0100
-@@ -69,6 +69,9 @@
- #define CONFIG_ATMEL_LCD 1
- #define CONFIG_ATMEL_LCD_BGR555 1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
-
- #define CONFIG_BOOTDELAY 3
-
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9rlek.h u-boot-2009.01/include/configs/at91sam9rlek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9rlek.h 2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9rlek.h 2009-01-04 00:44:54.000000000 +0100
-@@ -68,6 +68,9 @@
- #define CONFIG_ATMEL_LCD 1
- #define CONFIG_ATMEL_LCD_RGB565 1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
-
- #define CONFIG_BOOTDELAY 3
-
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch
deleted file mode 100644
index fd8516319..000000000
--- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-014-at572d940hfeb.patch
+++ /dev/null
@@ -1,3866 +0,0 @@
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/at572d940hfeb.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/at572d940hfeb.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/at572d940hfeb.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/at572d940hfeb.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,277 @@
-+/* (C) 2008 Copyright Atmel Corporation
-+ *
-+ * Antonio R. Costa <antonio.costa <at> atmel.com>
-+ * <costa.antonior <at> gmail.com>
-+ *
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at572d940hf.h>
-+#include <asm/arch/at572d940hf_matrix.h>
-+#include <asm/arch/at572d940hf_mc.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+#include <asm/arch/at91_aic.h>
-+#include <asm/arch/interrupts.h>
-+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-+#include <net.h>
-+#endif
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* ------------------------------------------------------------------------- */
-+/*
-+ * Miscelaneous platform dependent initialisations
-+ */
-+
-+static void AT572D940HFEB_serial_hw_init(void)
-+{
-+#ifdef CONFIG_USART0
-+ at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
-+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
-+#endif
-+
-+#ifdef CONFIG_USART1
-+ at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
-+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD1 */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
-+#endif
-+
-+#ifdef CONFIG_USART2
-+ at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
-+ at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
-+#endif
-+
-+#ifdef CONFIG_USART3 /* DBGU */
-+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
-+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-+#endif
-+}
-+
-+#ifdef CONFIG_CMD_NAND
-+static void AT572D940HFEB_nand_hw_init(void)
-+{
-+ unsigned long csa;
-+
-+ /* Enable CS3 */
-+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+ at91_sys_write(AT91_MATRIX_EBICSA,
-+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-+
-+ /* Configure SMC CS3 for NAND/SmartMedia */
-+ at91_sys_write(AT91_SMC_SETUP(3),
-+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
-+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-+ at91_sys_write(AT91_SMC_PULSE(3),
-+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
-+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-+ at91_sys_write(AT91_SMC_CYCLE(3),
-+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-+ at91_sys_write(AT91_SMC_MODE(3),
-+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-+ AT91_SMC_EXNWMODE_DISABLE |
-+ AT91_SMC_DBW_8 | AT91_SMC_TDF_(2));
-+
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT572D940HF_ID_PIOC);
-+
-+ /* Configure RDY/BSY */
-+ at91_set_gpio_input(AT91_PIN_PC16, 1);
-+
-+ /* Enable NandFlash */
-+ /* By DIP switch on AT572D940HFEB */
-+ at91_set_gpio_output(AT91_PIN_PC14, 1);
-+}
-+#endif
-+
-+#ifdef CONFIG_HAS_DATAFLASH
-+static void AT572D940HFEB_spi_hw_init(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
-+ at91_set_A_periph(AT91_PIN_PA4, 0); /* SPI0_NPCS1 */
-+
-+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
-+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
-+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-+
-+ /* Enable clock */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT572D940HF_ID_SPI0);
-+}
-+#endif
-+
-+#ifdef CONFIG_MACB
-+static void AT572D940HFEB_macb_hw_init(void)
-+{
-+ /* Enable clock */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT572D940HF_ID_EMAC);
-+
-+ /* Need to reset PHY -> 500ms reset */
-+#if 0
-+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+ (AT91_RSTC_ERSTL & (0x0D << 8)) |
-+ AT91_RSTC_URSTEN);
-+
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-+
-+ /* Wait for end hardware reset */
-+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-+
-+ /* Restore NRST value */
-+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+ (AT91_RSTC_ERSTL & (0x0 << 8)) |
-+ AT91_RSTC_URSTEN);
-+#endif
-+
-+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
-+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
-+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
-+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
-+ at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
-+ at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
-+ at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
-+ at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
-+ at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
-+ at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
-+ at91_set_A_periph(AT91_PIN_PA15, 0); /* EFCE100 */
-+}
-+#endif
-+
-+#ifdef CONFIG_MMC
-+static void AT572D940HFEB_mci_hw_init(void)
-+{
-+ at91_sys_write(AT91_PMC_PCER, (1 << AT572D940HF_ID_MCI));
-+
-+ at91_set_A_periph(AT91_PIN_PC22,0);
-+ at91_set_A_periph(AT91_PIN_PC23,0);
-+ at91_set_A_periph(AT91_PIN_PC24,0);
-+ at91_set_A_periph(AT91_PIN_PC25,0);
-+ at91_set_A_periph(AT91_PIN_PC26,0);
-+ at91_set_A_periph(AT91_PIN_PC27,0);
-+}
-+#endif
-+
-+#ifdef CONFIG_USBH
-+static void AT572D940HFEB_usbh_hw_init(void)
-+{
-+ at91_sys_write(AT91_PMC_PCER, (1 << AT572D940HF_ID_UHP));
-+ at91_sys_write(AT91_PMC_SCER, AT572D940HF_PMC_UHP);
-+}
-+
-+int rstc_init(void)
-+{
-+ /* Reads the SR to clean from
-+ * previous resets
-+ */
-+ at91_sys_read(AT91_RSTC_SR);
-+
-+ /* Disble the USR_RST line,
-+ * enable USR_RST_INT and
-+ * sets the EXT_RST length to 2^14
-+ * (500ms needed by the phy)
-+ */
-+ at91_sys_write(AT91_RSTC_MR, (0xa5<<24) | (13<<8) | AT91_RSTC_URSTIEN);
-+ return 0;
-+}
-+
-+int board_init(void)
-+{
-+
-+ /* Init the reset controller */
-+ rstc_init();
-+
-+ /* Init interrupts */
-+ interrupts_init();
-+
-+ /* Enable Ctrlc */
-+ console_init_f();
-+
-+ /* arch number of AT572D940HFEB-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_AT572D940HFEB;
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-+
-+ AT572D940HFEB_serial_hw_init();
-+
-+#ifdef CONFIG_CMD_NAND
-+ AT572D940HFEB_nand_hw_init();
-+#endif
-+
-+#ifdef CONFIG_HAS_DATAFLASH
-+ AT572D940HFEB_spi_hw_init();
-+#endif
-+
-+#ifdef CONFIG_MACB
-+ AT572D940HFEB_macb_hw_init();
-+#endif
-+
-+#ifdef CONFIG_MMC
-+ AT572D940HFEB_mci_hw_init();
-+#endif
-+
-+#ifdef CONFIG_USBH
-+ AT572D940HFEB_usbh_hw_init();
-+#endif
-+
-+#endif
-+ gd->flags |= GD_FLG_RELOC;
-+
-+ return 0;
-+}
-+
-+int dram_init(void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-+ return 0;
-+}
-+
-+#ifdef CONFIG_CMD_NET
-+#ifdef CONFIG_RESET_PHY_R
-+void reset_phy(void)
-+{
-+#ifdef CONFIG_MACB
-+ /*
-+ * Initialize ethernet HW addr prior to starting Linux,
-+ * needed for nfsroot
-+ */
-+ eth_init(gd->bd);
-+#endif /* CONFIG_MACB */
-+}
-+#endif /* CONFIG_RESET_PHY_R */
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ int rc = 0;
-+#ifdef CONFIG_MACB
-+ rc = at572d940hf_eth_initialize(bis);
-+#endif
-+ return rc;
-+}
-+
-+#endif /* CONFIG_CMD_NET */
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/config.mk u-boot-2009.01-rc1/board/atmel/at572d940hfeb/config.mk
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/config.mk 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/config.mk 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1 @@
-+TEXT_BASE = 0x23f00000
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/flash.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/flash.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/flash.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,507 @@
-+/*
-+ * (C) Copyright 2002
-+ * Lineo, Inc. <www.lineo.com>
-+ * Bernhard Kuhn <bkuhn@li...>
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Alex Zuepke <azu@sy...>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+ulong myflush(void);
-+
-+
-+/* Flash Organization Structure */
-+typedef struct OrgDef
-+{
-+ unsigned int sector_number;
-+ unsigned int sector_size;
-+} OrgDef;
-+
-+
-+/* Flash Organizations */
-+
-+OrgDef OrgAT49BV642D[] =
-+{
-+ { 8, 4*1024 },
-+ { 58, 32*1024 },
-+};
-+
-+OrgDef OrgAT49BV16x4[] =
-+{
-+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
-+ { 2, 32*1024 }, /* 2 * 32 kBytes sectors */
-+ { 30, 64*1024 }, /* 30 * 64 kBytes sectors */
-+};
-+
-+OrgDef OrgAT49BV16x4A[] =
-+{
-+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
-+ { 31, 64*1024 }, /* 31 * 64 kBytes sectors */
-+};
-+
-+OrgDef OrgAT49BV6416[] =
-+{
-+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
-+ { 127, 64*1024 }, /* 127 * 64 kBytes sectors */
-+};
-+
-+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-+
-+/* AT49BV1614A Codes */
-+#define FLASH_CODE1 0xAA
-+#define FLASH_CODE2 0x55
-+#define ID_IN_CODE 0x90
-+#define ID_OUT_CODE 0xF0
-+
-+
-+#define CMD_READ_ARRAY 0x00F0
-+#define CMD_UNLOCK1 0x00AA
-+#define CMD_UNLOCK2 0x0055
-+#define CMD_ERASE_SETUP 0x0080
-+#define CMD_ERASE_CONFIRM 0x0030
-+#define CMD_PROGRAM 0x00A0
-+#define CMD_UNLOCK_BYPASS 0x0020
-+#define CMD_SECTOR_UNLOCK 0x0070
-+
-+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
-+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
-+
-+#define BIT_ERASE_DONE 0x0080
-+#define BIT_RDY_MASK 0x0080
-+#define BIT_PROGRAM_ERROR 0x0020
-+#define BIT_TIMEOUT 0x80000000 /* our flag */
-+
-+#define READY 1
-+#define ERR 2
-+#define TMO 4
-+
-+/*-----------------------------------------------------------------------
-+ */
-+void flash_identification (flash_info_t * info)
-+{
-+ volatile u16 manuf_code, device_code, add_device_code;
-+
-+ MEM_FLASH_ADDR1 = FLASH_CODE1;
-+ MEM_FLASH_ADDR2 = FLASH_CODE2;
-+ MEM_FLASH_ADDR1 = ID_IN_CODE;
-+
-+ manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
-+ device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
-+ add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
-+
-+ MEM_FLASH_ADDR1 = FLASH_CODE1;
-+ MEM_FLASH_ADDR2 = FLASH_CODE2;
-+ MEM_FLASH_ADDR1 = ID_OUT_CODE;
-+
-+ /* Vendor type */
-+ info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
-+ printf ("Atmel: ");
-+
-+ if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-+
-+ if ((add_device_code & FLASH_TYPEMASK) ==
-+ (ATM_ID_BV1614A & FLASH_TYPEMASK)) {
-+ info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
-+ printf ("AT49BV1614A (16Mbit)\n");
-+ } else { /* AT49BV1614 Flash */
-+ info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
-+ printf ("AT49BV1614 (16Mbit)\n");
-+ }
-+
-+ } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
-+ info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
-+ printf ("AT49BV6416 (64Mbit)\n");
-+ }
-+}
-+
-+ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
-+{
-+ int i, nb_sectors = 0;
-+
-+ for (i=0; i<nb_blocks; i++){
-+ nb_sectors += pOrgDef[i].sector_number;
-+ }
-+
-+ return nb_sectors;
-+}
-+
-+void flash_unlock_sector(flash_info_t * info, unsigned int sector)
-+{
-+ volatile u16 *addr = (volatile u16 *) (info->start[sector]);
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ *addr = CMD_SECTOR_UNLOCK;
-+}
-+
-+
-+ulong flash_init (void)
-+{
-+ int i, j, k;
-+ unsigned int flash_nb_blocks, sector;
-+ unsigned int start_address;
-+ OrgDef *pOrgDef;
-+
-+ ulong size = 0;
-+
-+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-+ ulong flashbase = 0;
-+
-+ flash_identification (&flash_info[i]);
-+
-+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-+ (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-+
-+ pOrgDef = OrgAT49BV16x4;
-+ flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
-+ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-+ (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */
-+
-+ pOrgDef = OrgAT49BV16x4A;
-+ flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
-+ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-+ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-+
-+ pOrgDef = OrgAT49BV6416;
-+ flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
-+ } else {
-+ flash_nb_blocks = 0;
-+ pOrgDef = OrgAT49BV16x4;
-+ }
-+
-+ flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
-+ memset (flash_info[i].protect, 0, flash_info[i].sector_count);
-+
-+ if (i == 0)
-+ flashbase = PHYS_FLASH_1;
-+ else
-+ panic ("configured too many flash banks!\n");
-+
-+ sector = 0;
-+ start_address = flashbase;
-+ flash_info[i].size = 0;
-+
-+ for (j = 0; j < flash_nb_blocks; j++) {
-+ for (k = 0; k < pOrgDef[j].sector_number; k++) {
-+ flash_info[i].start[sector++] = start_address;
-+ start_address += pOrgDef[j].sector_size;
-+ flash_info[i].size += pOrgDef[j].sector_size;
-+ }
-+ }
-+
-+ size += flash_info[i].size;
-+
-+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-+ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-+
-+ /* Unlock all sectors at reset */
-+ for (j=0; j<flash_info[i].sector_count; j++){
-+ flash_unlock_sector(&flash_info[i], j);
-+ }
-+ }
-+ }
-+
-+ /* Protect binary boot image */
-+ flash_protect (FLAG_PROTECT_SET,
-+ CONFIG_SYS_FLASH_BASE,
-+ CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
-+
-+ /* Protect environment variables */
-+ flash_protect (FLAG_PROTECT_SET,
-+ CONFIG_ENV_ADDR,
-+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-+
-+ /* Protect U-Boot gzipped image */
-+ flash_protect (FLAG_PROTECT_SET,
-+ CONFIG_SYS_U_BOOT_BASE,
-+ CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
-+
-+ return size;
-+}
-+
-+/*-----------------------------------------------------------------------*/
-+void flash_print_info (flash_info_t * info)
-+{
-+ int i;
-+
-+ switch (info->flash_id & FLASH_VENDMASK) {
-+ case (ATM_MANUFACT & FLASH_VENDMASK):
-+ printf ("Atmel: ");
-+ break;
-+ default:
-+ printf ("Unknown Vendor ");
-+ break;
-+ }
-+
-+ switch (info->flash_id & FLASH_TYPEMASK) {
-+ case (ATM_ID_BV1614 & FLASH_TYPEMASK):
-+ printf ("AT49BV1614 (16Mbit)\n");
-+ break;
-+ case (ATM_ID_BV1614A & FLASH_TYPEMASK):
-+ printf ("AT49BV1614A (16Mbit)\n");
-+ break;
-+ case (ATM_ID_BV6416 & FLASH_TYPEMASK):
-+ printf ("AT49BV6416 (64Mbit)\n");
-+ break;
-+ default:
-+ printf ("Unknown Chip Type\n");
-+ return;
-+ }
-+
-+ printf (" Size: %ld MB in %d Sectors\n",
-+ info->size >> 20, info->sector_count);
-+
-+ printf (" Sector Start Addresses:");
-+ for (i = 0; i < info->sector_count; i++) {
-+ if ((i % 5) == 0) {
-+ printf ("\n ");
-+ }
-+ printf (" %08lX%s", info->start[i],
-+ info->protect[i] ? " (RO)" : " ");
-+ }
-+ printf ("\n");
-+}
-+
-+/*-----------------------------------------------------------------------*/
-+
-+int flash_erase (flash_info_t * info, int s_first, int s_last)
-+{
-+ ulong result;
-+ int iflag, cflag, prot, sect;
-+ int rc = ERR_OK;
-+ int chip1;
-+
-+ /* first look for protection bits */
-+
-+ if (info->flash_id == FLASH_UNKNOWN)
-+ return ERR_UNKNOWN_FLASH_TYPE;
-+
-+ if ((s_first < 0) || (s_first > s_last)) {
-+ return ERR_INVAL;
-+ }
-+
-+ if ((info->flash_id & FLASH_VENDMASK) !=
-+ (ATM_MANUFACT & FLASH_VENDMASK)) {
-+ return ERR_UNKNOWN_FLASH_VENDOR;
-+ }
-+
-+ prot = 0;
-+ for (sect = s_first; sect <= s_last; ++sect) {
-+ if (info->protect[sect]) {
-+ prot++;
-+ }
-+ }
-+ if (prot)
-+ return ERR_PROTECTED;
-+
-+ /*
-+ * Disable interrupts which might cause a timeout
-+ * here. Remember that our exception vectors are
-+ * at address 0 in the flash, and we don't want a
-+ * (ticker) exception to happen while the flash
-+ * chip is in programming mode.
-+ */
-+ cflag = icache_status ();
-+ icache_disable ();
-+ iflag = disable_interrupts ();
-+
-+ /* Start erase on unprotected sectors */
-+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-+ printf ("Erasing sector %2d ... ", sect);
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked ();
-+
-+ if (info->protect[sect] == 0) { /* not protected */
-+ volatile u16 *addr = (volatile u16 *) (info->start[sect]);
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ *addr = CMD_ERASE_CONFIRM;
-+
-+ /* wait until flash is ready */
-+ chip1 = 0;
-+
-+ do {
-+ result = *addr;
-+
-+ /* check timeout */
-+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
-+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+ chip1 = TMO;
-+ break;
-+ }
-+
-+ if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
-+ chip1 = READY;
-+
-+ } while (!chip1);
-+
-+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+
-+ if (chip1 == ERR) {
-+ rc = ERR_PROG_ERROR;
-+ goto outahere;
-+ }
-+ if (chip1 == TMO) {
-+ rc = ERR_TIMOUT;
-+ goto outahere;
-+ }
-+
-+ printf ("ok.\n");
-+ } else { /* it was protected */
-+ printf ("protected!\n");
-+ }
-+ }
-+
-+ if (ctrlc ())
-+ printf ("User Interrupt!\n");
-+
-+outahere:
-+ /* allow flash to settle - wait 10 ms */
-+ udelay_masked (10000);
-+
-+ if (iflag)
-+ enable_interrupts ();
-+
-+ if (cflag)
-+ icache_enable ();
-+
-+ return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash
-+ */
-+
-+static int write_word (flash_info_t * info, ulong dest, ulong data)
-+{
-+ volatile u16 *addr = (volatile u16 *) dest;
-+ ulong result;
-+ int rc = ERR_OK;
-+ int cflag, iflag;
-+ int chip1;
-+
-+ /*
-+ * Check if Flash is (sufficiently) erased
-+ */
-+ result = *addr;
-+ if ((result & data) != data)
-+ return ERR_NOT_ERASED;
-+
-+ /*
-+ * Disable interrupts which might cause a timeout
-+ * here. Remember that our exception vectors are
-+ * at address 0 in the flash, and we don't want a
-+ * (ticker) exception to happen while the flash
-+ * chip is in programming mode.
-+ */
-+ cflag = icache_status ();
-+ icache_disable ();
-+ iflag = disable_interrupts ();
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ MEM_FLASH_ADDR1 = CMD_PROGRAM;
-+ *addr = data;
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked ();
-+
-+ /* wait until flash is ready */
-+ chip1 = 0;
-+ do {
-+ result = *addr;
-+
-+ /* check timeout */
-+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
-+ chip1 = ERR | TMO;
-+ break;
-+ }
-+ if (!chip1 && ((result & 0x80) == (data & 0x80)))
-+ chip1 = READY;
-+
-+ } while (!chip1);
-+
-+ *addr = CMD_READ_ARRAY;
-+
-+ if (chip1 == ERR || *addr != data)
-+ rc = ERR_PROG_ERROR;
-+
-+ if (iflag)
-+ enable_interrupts ();
-+
-+ if (cflag)
-+ icache_enable ();
-+
-+ return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash.
-+ */
-+
-+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-+{
-+ ulong wp, data;
-+ int rc;
-+
-+ if (addr & 1) {
-+ printf ("unaligned destination not supported\n");
-+ return ERR_ALIGN;
-+ };
-+
-+ if ((int) src & 1) {
-+ printf ("unaligned source not supported\n");
-+ return ERR_ALIGN;
-+ };
-+
-+ wp = addr;
-+
-+ while (cnt >= 2) {
-+ data = *((volatile u16 *) src);
-+ if ((rc = write_word (info, wp, data)) != 0) {
-+ return (rc);
-+ }
-+ src += 2;
-+ wp += 2;
-+ cnt -= 2;
-+ }
-+
-+ if (cnt == 1) {
-+ data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8);
-+ if ((rc = write_word (info, wp, data)) != 0) {
-+ return (rc);
-+ }
-+ src += 1;
-+ wp += 1;
-+ cnt -= 1;
-+ };
-+
-+ return ERR_OK;
-+}
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/interrupts.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/interrupts.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/interrupts.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/interrupts.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,83 @@
-+/*
-+ * board/atmel/at572d940hfeb/interrupts.c
-+ * Copyright 2008 (C) ATMEL
-+ * Antonio R. Costa <antonio.costa <at> atmel.com>
-+ * <costa.antonior <at> gmail.com>
-+ *
-+ * Advanced Interrupt Controller (AIC).
-+ * Based on AT572D940HF datasheet.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at572d940hf.h>
-+#include <asm/arch/io.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/at91_aic.h>
-+#include <asm/arch/interrupts.h>
-+
-+irq_handler_t handler_reset(void)
-+{
-+ unsigned long rstc_sr=0;
-+
-+ rstc_sr = at91_sys_read(AT91_RSTC_SR);
-+ if(rstc_sr & AT91_RSTC_URSTS) {
-+ while(!(at91_sys_read(AT91_RSTC_SR) & (1<<16)));
-+ reset_cpu(1);
-+ };
-+}
-+
-+irq_handler_t handler_ext1(void)
-+{
-+ puts("--- EXT1 IRQ ---\n");
-+}
-+
-+
-+int reset_irqs(void) {
-+ unsigned long ul = 0;
-+ volatile unsigned long * psrc = _armboot_start;
-+ volatile unsigned long * pdest = 0x0;
-+
-+ /*
-+ * Relocates U-Boot ARM IRQ vectors to 0
-+ * This is an ugly way to do it.
-+ * More support must be offered by start.S
-+ * on symbols and macros performing partial relocation
-+ */
-+
-+ while(ul++ < 16)
-+ *pdest++ = *psrc++;
-+
-+
-+ /* Reset IRQ vectors */
-+ for(ul=0;ul<32;ul++)
-+ RESET_IRQ_HANDLER(ul);
-+ return 0;
-+}
-+
-+int interrupts_init(void)
-+{
-+ reset_irqs();
-+ SET_IRQ_HANDLER(1 ,0x27,handler_reset);
-+ SET_IRQ_HANDLER(30,0x27,handler_ext1);
-+ return 0;
-+}
-+
-+
-+void do_irq(struct pt_regs* pregs) {
-+
-+ unsigned long int ivr = AIC_REG(AIC_IVR);
-+ unsigned long int isr = AIC_REG(AIC_ISR);
-+ void (*irq_handler)(unsigned long int) = (void(*)(unsigned long int)) ivr;
-+
-+ irq_handler(isr);
-+
-+ /* Acknowledges irq */
-+ IRQ_ACKNOWLEDGE(ivr);
-+
-+ return;
-+};
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/Makefile u-boot-2009.01-rc1/board/atmel/at572d940hfeb/Makefile
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/Makefile 2009-01-04 22:03:38.000000000 +0100
-@@ -0,0 +1,60 @@
-+#
-+# (C) Copyright 2003-2008
-+# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de.
-+#
-+#
-+#
-+#
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).a
-+
-+COBJS-y += at572d940hfeb.o
-+#COBJS-y += led.o
-+COBJS-y += partition.o
-+#COBJS-y += flash.o
-+COBJS-$(CONFIG_CMD_NAND) += nand.o
-+#COBJS-$(CONFIG_CMD_MMC) += atmel_mci.o
-+COBJS-$(CONFIG_USE_IRQ) += interrupts.o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS-y))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak $(obj).depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/nand.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/nand.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/nand.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/nand.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,78 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9g20.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_pio.h>
-+
-+#include <nand.h>
-+
-+/*
-+ * hardware specific access to control-lines
-+ */
-+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
-+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
-+
-+static void at572d940hfeb_nand_hwcontrol(struct mtd_info *mtd,
-+ int cmd, unsigned int ctrl)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-+
-+ if (ctrl & NAND_CLE)
-+ IO_ADDR_W |= MASK_CLE;
-+ if (ctrl & NAND_ALE)
-+ IO_ADDR_W |= MASK_ALE;
-+
-+ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
-+ this->IO_ADDR_W = (void *) IO_ADDR_W;
-+ }
-+
-+ if (cmd != NAND_CMD_NONE)
-+ writeb(cmd, this->IO_ADDR_W);
-+}
-+
-+static int at572d940hfeb_nand_ready(struct mtd_info *mtd)
-+{
-+ return at91_get_gpio_value(AT91_PIN_PC13);
-+}
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+ nand->ecc.mode = NAND_ECC_SOFT;
-+#ifdef CONFIG_SYS_NAND_DBW_16
-+ nand->options = NAND_BUSWIDTH_16;
-+#endif
-+ nand->cmd_ctrl = at572d940hfeb_nand_hwcontrol;
-+ nand->dev_ready = at572d940hfeb_nand_ready;
-+ nand->chip_delay = 20;
-+
-+ return 0;
-+}
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/partition.c u-boot-2009.01-rc1/board/atmel/at572d940hfeb/partition.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/partition.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/partition.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,39 @@
-+/*
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+#include <common.h>
-+#include <config.h>
-+#include <asm/hardware.h>
-+#include <dataflash.h>
-+
-+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-+
-+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
-+};
-+
-+/*define the area offsets*/
-+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
-+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
-+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
-+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-+};
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/u-boot.lds u-boot-2009.01-rc1/board/atmel/at572d940hfeb/u-boot.lds
---- u-boot-2009.01-rc1-0rig//board/atmel/at572d940hfeb/u-boot.lds 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/board/atmel/at572d940hfeb/u-boot.lds 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj <at> denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ cpu/arm926ejs/start.o (.text)
-+ *(.text)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(.rodata) }
-+
-+ . = ALIGN(4);
-+ .data : { *(.data) }
-+
-+ . = ALIGN(4);
-+ .got : { *(.got) }
-+
-+ . = .;
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : { *(.u_boot_cmd) }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ __bss_start = .;
-+ .bss : { *(.bss) }
-+ _end = .;
-+}
-+
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/config.mk u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/config.mk
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/config.mk 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/config.mk 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,3 @@
-+PLATFORM_CPPFLAGS += -march=armv5te
-+PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
-+
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/ether.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/ether.c
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/ether.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/ether.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,36 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/hardware.h>
-+
-+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-+
-+#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-+void at572d940hf_eth_initialize(bd_t *bi)
-+{
-+ macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
-+}
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/lowlevel_init.S u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/lowlevel_init.S
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/lowlevel_init.S 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/lowlevel_init.S 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,44 @@
-+/*
-+ * AT91CAP9/SAM9 setup stuff
-+ *
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <version.h>
-+
-+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+
-+ .globl lowlevel_init
-+
-+lowlevel_init:
-+
-+/*
-+ * Clocks/SDRAM initialization is handled by at91bootstrap,
-+ * no need to do it here...
-+ */
-+ mov pc, lr
-+
-+ .ltorg
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/Makefile u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/Makefile
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/Makefile 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,53 @@
-+#
-+# (C) Copyright 2000-2008
-+# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de.
-+#
-+#
-+#
-+#
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(SOC).a
-+
-+COBJS-y += ether.o
-+COBJS-y += timer.o
-+COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o
-+COBJS-y += usb.o
-+SOBJS = lowlevel_init.o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-+
-+all: $(obj).depend $(LIB)
-+
-+$(LIB): $(OBJS)
-+ $(AR) $(ARFLAGS) $@ $(OBJS)
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/spi.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/spi.c
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/spi.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,158 @@
-+/*
-+ * Driver for ATMEL DataFlash support
-+ * Author : Hamid Ikdoumi (Atmel)
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+#include <asm/arch/at91_pio.h>
-+#include <asm/arch/at91_spi.h>
-+
-+#include <dataflash.h>
-+
-+#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */
-+#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */
-+#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */
-+
-+void AT91F_SpiInit(void)
-+{
-+ /* Reset the SPI */
-+ writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR);
-+
-+ /* Configure SPI in Master Mode with No CS selected !!! */
-+ writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS,
-+ AT91_BASE_SPI + AT91_SPI_MR);
-+
-+ /* Configure CS0 */
-+ writel(AT91_SPI_NCPHA |
-+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
-+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
-+ ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
-+ AT91_BASE_SPI + AT91_SPI_CSR(0));
-+
-+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
-+ /* Configure CS1 */
-+ writel(AT91_SPI_NCPHA |
-+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
-+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
-+ ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
-+ AT91_BASE_SPI + AT91_SPI_CSR(1));
-+#endif
-+
-+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
-+ /* Configure CS3 */
-+ writel(AT91_SPI_NCPHA |
-+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
-+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
-+ ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
-+ AT91_BASE_SPI + AT91_SPI_CSR(3));
-+#endif
-+
-+ /* SPI_Enable */
-+ writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
-+
-+ while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS));
-+
-+/*
-+ * Add tempo to get SPI in a safe state.
-+ * Should not be needed for new silicon (Rev B)
-+ */
-+ udelay(500000);
-+ readl(AT91_BASE_SPI + AT91_SPI_SR);
-+ readl(AT91_BASE_SPI + AT91_SPI_RDR);
-+
-+}
-+
-+void AT91F_SpiEnable(int cs)
-+{
-+ unsigned long mode;
-+
-+ switch (cs) {
-+ case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-+ mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
-+ mode &= 0xFFF0FFFF;
-+ writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
-+ AT91_BASE_SPI + AT91_SPI_MR);
-+ break;
-+ case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */
-+ mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
-+ mode &= 0xFFF0FFFF;
-+ writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
-+ AT91_BASE_SPI + AT91_SPI_MR);
-+ break;
-+ case 3:
-+ mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
-+ mode &= 0xFFF0FFFF;
-+ writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
-+ AT91_BASE_SPI + AT91_SPI_MR);
-+ break;
-+ }
-+
-+ /* SPI_Enable */
-+ writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
-+}
-+
-+unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
-+
-+unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
-+{
-+ unsigned int timeout;
-+
-+ pDesc->state = BUSY;
-+
-+ writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
-+
-+ /* Initialize the Transmit and Receive Pointer */
-+ writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR);
-+ writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR);
-+
-+ /* Intialize the Transmit and Receive Counters */
-+ writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR);
-+ writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR);
-+
-+ if (pDesc->tx_data_size != 0) {
-+ /* Initialize the Next Transmit and Next Receive Pointer */
-+ writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR);
-+ writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR);
-+
-+ /* Intialize the Next Transmit and Next Receive Counters */
-+ writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR);
-+ writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR);
-+ }
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked();
-+ timeout = 0;
-+
-+ writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
-+ while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
-+ ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT));
-+ writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
-+ pDesc->state = IDLE;
-+
-+ if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
-+ printf("Error Timeout\n\r");
-+ return DATAFLASH_ERROR;
-+ }
-+
-+ return DATAFLASH_OK;
-+}
-+
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/timer.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/timer.c
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/timer.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/timer.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,293 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Author: Antonio R. Costa
-+ * based upon AT91
-+ */
-+
-+#include <common.h>
-+#include <asm/errno.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/at572d940hf.h>
-+#include <asm/arch/at572d940hf_mc.h>
-+#include <asm/arch/memory-map.h>
-+#include <asm/arch/at91_pit.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/timer.h>
-+#include <asm/arch/io.h>
-+
-+/*
-+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
-+ * setting the 20 bit counter period to its maximum (0xfffff).
-+ */
-+#define TIMER_LOAD_VAL 0xfffff
-+#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR)
-+#define READ_TIMER at91_sys_read(AT91_PIT_PIIR)
-+#define TIMER_FREQ (AT91_MASTER_CLOCK << 4)
-+#define TICKS_TO_USEC(ticks) ((ticks) / 6)
-+
-+ulong get_timer_masked(void);
-+ulong resettime;
-+
-+int sys_get_freq(unsigned long mode, unsigned long *pfreq)
-+{
-+ unsigned long mckr = (unsigned long) -1;
-+ unsigned long clksrc=0;
-+ unsigned long clkpre=0;
-+ unsigned long clkdiv=0;
-+ unsigned long main_clock=0;
-+ unsigned long tmode = mode;
-+
-+
-+ /*!This function checks for \c AT91_CLK_DELAY_CYCLES cycles if the main clock is ready.
-+ * If it is not it exits with \c -EIO.
-+ * Otherwise, assuming a slow clock of \c CONFIG_SLOW_CLK Hz (default 32768 Hz), it computes
-+ * the number of main clock cycles occurring in 16 slow clock cycles.
-+ * This number multiplied by (_GNAM_SLOW_CLK / 16) results in the
-+ * actual frequency of the main clock.
-+ */
-+ {
-+ long tmp = AT91_CLK_DELAY_CYCLES;
-+ while(!(at91_sys_read(AT91_CKGR_MCFR) & AT91_PMC_MAINRDY) && (tmp-- > 0));
-+ if(tmp <= 0) {
-+ *pfreq = 0;
-+ return -EIO;
-+ }
-+ }
-+
-+ main_clock = (at91_sys_read(AT91_CKGR_MCFR) & AT91_PMC_MAINF) * (CONFIG_SLOW_CLK / 16);
-+
-+ /*!Depending on the \c mode parameter, this function returns frequencies
-+ * for the <b>slow clock</b>, <b>main clock</b>, \b PLLA, \b PLLB or <b>master clock</b>.
-+ */
-+
-+ /*!In the last case the function reads the PMC to find which source
-+ * has been selected for the master clock and perform the relevant
-+ * computations.
-+ */
-+
-+ if(AT91_SLOW_FREQ == mode) {
-+ *pfreq = CONFIG_SLOW_CLK;
-+ return 0;
-+ }
-+
-+ /* Little trick: master clock depends on another source,
-+ * so here it checks for the selected source and
-+ * change the mode param to the master clock source
-+ */
-+ if((AT91_SYS_FREQ == mode) | (AT91_PROC_FREQ == mode)) {
-+ mckr = at91_sys_read(AT91_PMC_MCKR);
-+ clksrc = (mckr & AT91_PMC_CSS ) ;
-+ clkpre = (mckr & AT91_PMC_PRES) >> 2;
-+ clkdiv = (mckr & AT91_PMC_MDIV) >> 8;
-+ tmode = clksrc;
-+ }
-+
-+ if(AT91_PMC_CSS_MAIN == tmode)
-+ *pfreq = main_clock;
-+
-+ if(AT91_PMC_CSS_PLLA == tmode) {
-+ unsigned long pllar = at91_sys_read(AT91_CKGR_PLLAR);
-+ unsigned long mula = (pllar & AT91_PMC_MUL) >> 16;
-+ unsigned long diva = (pllar & AT91_PMC_DIV);
-+ *pfreq = (diva != 0) ? ((main_clock / diva) * ++mula) : 0;
-+ }
-+
-+ if(AT91_PMC_CSS_PLLB == tmode) {
-+ unsigned long pllbr = at91_sys_read(AT91_CKGR_PLLBR);
-+ unsigned long mulb = (pllbr & AT91_PMC_MUL) >> 16;
-+ unsigned long divb = (pllbr & AT91_PMC_DIV);
-+
-+ *pfreq = (divb != 0) ? ((main_clock / divb) * ++mulb) : 0;
-+ }
-+
-+ /* If the mode selected is different of
-+ * _GNAM_SYS_FREQ or AT91_PROC_FREQ
-+ * all is done and frequency can be returned.
-+ */
-+ if((AT91_SYS_FREQ != mode) & (AT91_PROC_FREQ != mode))
-+ return 0;
-+
-+ /* Here it divides the frequency
-+ * by the prescaler factor
-+ */
-+ *pfreq = *pfreq >> clkpre;
-+
-+ /* If the selected frequency is AT91_SYS_FREQ
-+ * then it must be selected by the clkdiv factor
-+ */
-+ if(AT91_SYS_FREQ == mode)
-+ *pfreq = *pfreq >> clkdiv;
-+
-+ return 0;
-+}
-+
-+
-+/* nothing really to do with interrupts, just starts up a counter. */
-+int timer_init(void)
-+{
-+ /*
-+ * Enable PITC Clock
-+ * The clock is already enabled for system controller in boot
-+ */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-+
-+ /* Enable PITC */
-+ at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN);
-+
-+ reset_timer_masked();
-+
-+ return 0;
-+}
-+
-+/*
-+ * timer without interrupts
-+ */
-+
-+static inline ulong get_timer_raw(void)
-+{
-+ ulong now = READ_TIMER;
-+
-+ if (now >= resettime)
-+ return now - resettime;
-+ else
-+ return 0xFFFFFFFFUL - (resettime - now) ;
-+}
-+
-+void reset_timer_masked(void)
-+{
-+ resettime = READ_TIMER;
-+}
-+
-+ulong get_timer_masked(void)
-+{
-+ return TICKS_TO_USEC(get_timer_raw());
-+
-+}
-+
-+void udelay_masked(unsigned long usec)
-+{
-+ ulong tmp;
-+
-+ tmp = get_timer(0);
-+ while (get_timer(tmp) < usec) /* our timer works in usecs */
-+ ; /* NOP */
-+}
-+
-+void reset_timer(void)
-+{
-+ reset_timer_masked();
-+}
-+
-+ulong get_timer(ulong base)
-+{
-+ ulong now = get_timer_masked();
-+
-+ if (now >= base)
-+ return now - base;
-+ else
-+ return TICKS_TO_USEC(0xFFFFFFFFUL) - (base - now) ;
-+}
-+
-+void udelay(unsigned long usec)
-+{
-+ udelay_masked(usec);
-+}
-+
-+/*
-+ * This function is derived from PowerPC code (read timebase as long long).
-+ * On ARM it just returns the timer value.
-+ */
-+unsigned long long get_ticks(void)
-+{
-+ return get_timer(0);
-+}
-+
-+/*
-+ * This function is derived from PowerPC code (timebase clock frequency).
-+ * On ARM it returns the number of timer ticks per second.
-+ */
-+ulong get_tbclk(void)
-+{
-+ ulong tbclk;
-+
-+ tbclk = CONFIG_SYS_HZ;
-+ return tbclk;
-+}
-+
-+/*
-+ * Reset the cpu by setting up the watchdog timer and let him time out.
-+ */
-+void reset_cpu(ulong ignored)
-+{
-+ /* at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | (0x3u << 8) | 0x01); */
-+
-+ /*
-+ * ARC:
-+ * This code must be executed in internal RAM
-+ * cause the SDRAM is under reset
-+ */
-+
-+ /*
-+ * ARC:
-+ * Reset SDRAM in safe way
-+ */
-+ unsigned long reg = at91_sys_read(AT91_SDRAMC_LPR);
-+ at91_sys_write(AT91_SDRAMC_LPR, reg | AT91_SDRAMC_LPCB_SELF_REFRESH);
-+ at91_sys_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL);
-+ *(volatile unsigned long *) AT572D940_SDRAM_BASE = 0x0;
-+
-+ /*
-+ * ARC
-+ * Waits until the reset button has been released.
-+ * Unusefull if checked previously.
-+ */
-+
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-+
-+
-+ while(!(at91_sys_read(AT91_RSTC_SR) & (1<<16)));
-+
-+ {
-+ /*
-+ * ARC:
-+ * i should be register cause SDRAM has been reset
-+ */
-+ volatile register unsigned int i = 1000000;
-+ while(i-->0);
-+ };
-+
-+
-+ /* this is the way Linux does it */
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY |
-+ AT91_RSTC_PROCRST |
-+ /* AT91_RSTC_EXTRST */
-+ AT91_RSTC_PERRST);
-+ return;
-+ while (1);
-+ /* Never reached */
-+}
-+
-diff -urN u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/usb.c u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/usb.c
---- u-boot-2009.01-rc1-0rig//cpu/arm926ejs/at572d940hf/usb.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/cpu/arm926ejs/at572d940hf/usb.c 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,55 @@
-+/*
-+ * (C) Copyright 2006
-+ * DENX Software Engineering <mk <at> denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/io.h>
-+#include <asm/arch/at91_pmc.h>
-+
-+int usb_cpu_init(void)
-+{
-+ /* Enable USB host clock. */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
-+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
-+
-+ return 0;
-+}
-+
-+int usb_cpu_stop(void)
-+{
-+ /* Disable USB host clock. */
-+ at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
-+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
-+ return 0;
-+}
-+
-+int usb_cpu_init_fail(void)
-+{
-+ return usb_cpu_stop();
-+}
-+
-+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,148 @@
-+/*
-+ * include/asm-arm/arch-at91/AT572D940HFhf.h
-+ *
-+ * (C) 2008 Antonio R. Costa
-+ *
-+ * Common definitions.
-+ * Based on AT572D940HFHF datasheet rev A.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT572D940HFHF_H
-+#define AT572D940HFHF_H
-+
-+/*
-+ * Peripheral identifiers/interrupts.
-+ */
-+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-+#define AT91_ID_SYS 1 /* System Peripherals */
-+#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
-+#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
-+#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
-+#define AT572D940HF_ID_EMAC 5 /* Ethernet */
-+#define AT572D940HF_ID_US0 6 /* USART 0 */
-+#define AT572D940HF_ID_US1 7 /* USART 1 */
-+#define AT572D940HF_ID_US2 8 /* USART 2 */
-+#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
-+#define AT572D940HF_ID_UDP 10 /* USB Device Port */
-+#define AT572D940HF_ID_TWI 11 /* Two-Wire Interface */
-+#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface */
-+#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-+#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-+#define AT572D940HF_ID_SSC 14 /* Serial Synchronous Controller */
-+#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller */
-+#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller */
-+#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller */
-+#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
-+#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
-+#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
-+#define AT572D940HF_ID_UHP 20 /* USB Host port */
-+#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller */
-+#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface */
-+#define AT572D940HF_ID_CAN0 23 /* CAN Controller */
-+#define AT572D940HF_ID_CAN1 24 /* CAN Controller */
-+#define AT572D940HF_ID_mHALT 25 /* mAgicV DSP halt int */
-+#define AT572D940HF_ID_mSIRQ1 26 /* mAgicV DSP SIRQ1 int */
-+#define AT572D940HF_ID_mEXC 27 /* mAgicV DSP Exception int */
-+#define AT572D940HF_ID_mEDMA 28 /* mAgicV DSP end of DMA transfer int */
-+#define AT572D940HF_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-+#define AT572D940HF_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-+#define AT572D940HF_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-+
-+#define AT91_ID_US0 AT572D940HF_ID_US0
-+#define AT91_ID_US1 AT572D940HF_ID_US1
-+#define AT91_ID_US2 AT572D940HF_ID_US2
-+#define AT91_ID_US3 AT572D940HF_ID_US3
-+
-+#define AT91_ID_UHP AT572D940HF_ID_UHP
-+#define AT91_PMC_UHP AT572D940HF_ID_UHP
-+
-+/*
-+ * User Peripheral physical base addresses.
-+ */
-+#define AT572D940HF_BASE_TCB0 0xfffa0000
-+#define AT572D940HF_BASE_TC0 0xfffa0000
-+#define AT572D940HF_BASE_TC1 0xfffa0040
-+#define AT572D940HF_BASE_TC2 0xfffa0080
-+#define AT572D940HF_BASE_UDP 0xfffa4000
-+#define AT572D940HF_BASE_MCI 0xfffa8000
-+#define AT572D940HF_BASE_TWI 0xfffac000
-+#define AT572D940HF_BASE_US0 0xfffb0000
-+#define AT572D940HF_BASE_US1 0xfffb4000
-+#define AT572D940HF_BASE_US2 0xfffb8000
-+#define AT572D940HF_BASE_SSC 0xfffbc000
-+#define AT572D940HF_BASE_ISI 0xfffc0000
-+#define AT572D940HF_BASE_EMAC 0xfffd8000
-+#define AT572D940HF_BASE_SPI0 0xfffc8000
-+#define AT572D940HF_BASE_SPI1 0xfffcc000
-+#define AT572D940HF_BASE_US3 0xfffd0000
-+#define AT572D940HF_BASE_US4 0xfffd4000
-+#define AT572D940HF_BASE_US5 0xfffd8000
-+#define AT572D940HF_BASE_TCB1 0xfffdc000
-+#define AT572D940HF_BASE_TC3 0xfffdc000
-+#define AT572D940HF_BASE_TC4 0xfffdc040
-+#define AT572D940HF_BASE_TC5 0xfffdc080
-+#define AT572D940HF_BASE_ADC 0xfffe0000
-+#define AT572D940HF_BASE_RSTC 0xfffffd00
-+#define AT91_BASE_SYS 0xffffea00
-+
-+#define AT91_BASE_EMAC AT572D940HF_BASE_EMAC
-+#define AT91_BASE_SPI AT572D940HF_BASE_SPI0
-+#define MMCI_BASE AT572D940HF_BASE_MCI
-+
-+/*
-+ * System Peripherals (offset from AT91_BASE_SYS)
-+ */
-+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-+
-+#define AT91_USART0 AT572D940HF_BASE_US0
-+#define AT91_USART1 AT572D940HF_BASE_US1
-+#define AT91_USART2 AT572D940HF_BASE_US2
-+#define AT91_USART3 AT572D940HF_BASE_US3
-+#define AT91_USART4 AT572D940HF_BASE_US4
-+#define AT91_USART5 AT572D940HF_BASE_US5
-+
-+/*
-+ * Internal Memory.
-+ */
-+#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
-+#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-+
-+#define AT572D940HF_SRAM0_BASE 0x00100000 /* Internal SRAM 0 base address */
-+#define AT572D940HF_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (4Kb) */
-+#define AT572D940HF_SRAM1_BASE 0x00200000 /* Internal SRAM 0 base address */
-+#define AT572D940HF_SRAM1_SIZE SZ_16K /* Internal SRAM 0 size (4Kb) */
-+#define AT572D940HF_SRAM2_BASE 0x00300000 /* Internal SRAM 1 base address */
-+#define AT572D940HF_SRAM2_SIZE SZ_16K /* Internal SRAM 1 size (4Kb) */
-+
-+/* SDRAM */
-+#define AT572D940HF_SDRAM_BASE 0x20000000
-+
-+/* USB Host */
-+#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
-+
-+#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
-+#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_matrix.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,78 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
-+ *
-+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-+ * Based on AT91SAM9260 datasheet revision B.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9260_MATRIX_H
-+#define AT91SAM9260_MATRIX_H
-+
-+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-+
-+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-+
-+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-+
-+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-+
-+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-+#define AT91_MATRIX_CS1A_SMC (0 << 1)
-+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-+#define AT91_MATRIX_CS3A_SMC (0 << 3)
-+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-+#define AT91_MATRIX_CS4A_SMC (0 << 4)
-+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_CS5A_SMC (0 << 5)
-+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_mc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_mc.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at572d940hf_mc.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at572d940hf_mc.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,140 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam926x_mc.h
-+ *
-+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+*/
-+
-+#ifndef AT91SAM926x_MC_H
-+#define AT91SAM926x_MC_H
-+
-+/* SDRAM Controller (SDRAMC) registers */
-+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
-+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-+#define AT91_SDRAMC_MODE_NORMAL 0
-+#define AT91_SDRAMC_MODE_NOP 1
-+#define AT91_SDRAMC_MODE_PRECHARGE 2
-+#define AT91_SDRAMC_MODE_LMR 3
-+#define AT91_SDRAMC_MODE_REFRESH 4
-+#define AT91_SDRAMC_MODE_EXT_LMR 5
-+#define AT91_SDRAMC_MODE_DEEP 6
-+
-+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
-+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-+
-+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
-+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-+#define AT91_SDRAMC_NC_8 (0 << 0)
-+#define AT91_SDRAMC_NC_9 (1 << 0)
-+#define AT91_SDRAMC_NC_10 (2 << 0)
-+#define AT91_SDRAMC_NC_11 (3 << 0)
-+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-+#define AT91_SDRAMC_NR_11 (0 << 2)
-+#define AT91_SDRAMC_NR_12 (1 << 2)
-+#define AT91_SDRAMC_NR_13 (2 << 2)
-+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-+#define AT91_SDRAMC_NB_2 (0 << 4)
-+#define AT91_SDRAMC_NB_4 (1 << 4)
-+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-+#define AT91_SDRAMC_CAS_1 (1 << 5)
-+#define AT91_SDRAMC_CAS_2 (2 << 5)
-+#define AT91_SDRAMC_CAS_3 (3 << 5)
-+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
-+#define AT91_SDRAMC_DBW_32 (0 << 7)
-+#define AT91_SDRAMC_DBW_16 (1 << 7)
-+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-+
-+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
-+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
-+#define AT91_SDRAMC_LPCB_DISABLE 0
-+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
-+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
-+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
-+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
-+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
-+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-+
-+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
-+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-+
-+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
-+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
-+#define AT91_SDRAMC_MD_SDRAM 0
-+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-+
-+/* Static Memory Controller (SMC) registers */
-+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10))/* Setup Register for CS n */
-+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-+
-+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10))/* Pulse Register for CS n */
-+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-+
-+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10))/* Cycle Register for CS n */
-+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-+
-+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-+#define AT91_SMC_EXNWMODE_READY (3 << 4)
-+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-+#define AT91_SMC_BAT_SELECT (0 << 8)
-+#define AT91_SMC_BAT_WRITE (1 << 8)
-+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-+#define AT91_SMC_DBW_8 (0 << 12)
-+#define AT91_SMC_DBW_16 (1 << 12)
-+#define AT91_SMC_DBW_32 (2 << 12)
-+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-+#define AT91_SMC_TDF_(x) ((x) << 16)
-+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-+#define AT91_SMC_PS (3 << 28) /* Page Size */
-+#define AT91_SMC_PS_4 (0 << 28)
-+#define AT91_SMC_PS_8 (1 << 28)
-+#define AT91_SMC_PS_16 (2 << 28)
-+#define AT91_SMC_PS_32 (3 << 28)
-+
-+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#endif
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_aic.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_aic.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_aic.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_aic.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,43 @@
-+/*
-+ * include/asm-arm/arch-at572d940/at91_aic.h
-+ *
-+ * Copyright (C) ATMEL
-+ *
-+ * Advanced Interrupt Controller (AIC).
-+ * Based on AT572D940 datasheet.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#define AIC_BASE 0xfffff000
-+
-+#define AIC_SMR0 0x0
-+#define AIC_SVR0 0x80
-+#define AIC_IVR 0x100
-+#define AIC_FIQ 0x104
-+#define AIC_ISR 0x108
-+#define AIC_IPR 0x10c
-+#define AIC_IMR 0x110
-+#define AIC_ICR 0x114
-+#define AIC_IECR 0x120
-+#define AIC_IDCR 0x124
-+#define AIC_ICCR 0x128
-+#define AIC_ISCR 0x12c
-+#define AIC_EOICR 0x130
-+#define AIC_SPU 0x134
-+
-+#define AIC_SMR(n) \
-+ ((unsigned long) (((unsigned long*) AIC_SMR0) + (n)))
-+#define AIC_SVR(n) \
-+ ((unsigned long) (((unsigned long*) AIC_SVR0) + (n)))
-+
-+#define AIC_WRITE(reg,value) \
-+ (*((volatile unsigned long*) (AIC_BASE + (reg))) = value)
-+#define AIC_READ(reg,value) \
-+ (value = *((volatile unsigned long*) (AIC_BASE + (reg))))
-+
-+#define AIC_REG(reg) \
-+ (*((volatile unsigned long*) (AIC_BASE + (reg))))
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pio.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pio.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pio.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pio.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,52 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_pio.h
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * Parallel I/O Controller (PIO) - System peripherals registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_PIO_H
-+#define AT91_PIO_H
-+
-+#include <asm/arch/at572d940hf.h>
-+
-+#define PIO_PER 0x00 /* Enable Register */
-+#define PIO_PDR 0x04 /* Disable Register */
-+#define PIO_PSR 0x08 /* Status Register */
-+#define PIO_OER 0x10 /* Output Enable Register */
-+#define PIO_ODR 0x14 /* Output Disable Register */
-+#define PIO_OSR 0x18 /* Output Status Register */
-+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-+#define PIO_SODR 0x30 /* Set Output Data Register */
-+#define PIO_CODR 0x34 /* Clear Output Data Register */
-+#define PIO_ODSR 0x38 /* Output Data Status Register */
-+#define PIO_PDSR 0x3c /* Pin Data Status Register */
-+#define PIO_IER 0x40 /* Interrupt Enable Register */
-+#define PIO_IDR 0x44 /* Interrupt Disable Register */
-+#define PIO_IMR 0x48 /* Interrupt Mask Register */
-+#define PIO_ISR 0x4c /* Interrupt Status Register */
-+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-+#define PIO_PUER 0x64 /* Pull-up Enable Register */
-+#define PIO_PUSR 0x68 /* Pull-up Status Register */
-+#define PIO_ASR 0x70 /* Peripheral A Select Register */
-+#define PIO_BSR 0x74 /* Peripheral B Select Register */
-+#define PIO_ABSR 0x78 /* AB Status Register */
-+#define PIO_OWER 0xa0 /* Output Write Enable Register */
-+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-+#define PIO_OWSR 0xa8 /* Output Write Status Register */
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pit.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pit.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pit.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pit.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,29 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_pit.h
-+ *
-+ * Periodic Interval Timer (PIT) - System peripherals regsters.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_PIT_H
-+#define AT91_PIT_H
-+
-+#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
-+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
-+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
-+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
-+
-+#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
-+#define AT91_PIT_PITS (1 << 0) /* Timer Status */
-+
-+#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
-+#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
-+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
-+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pmc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pmc.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_pmc.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_pmc.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,102 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_pmc.h
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * Power Management Controller (PMC) - System peripherals registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_PMC_H
-+#define AT91_PMC_H
-+
-+#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-+#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
-+
-+#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
-+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
-+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
-+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
-+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
-+#define AT572D940HF_PMC_UHP (1 << 6) /* USB Host Port Clock [AT572D940HF] */
-+#define AT572D940HF_PMC_UDP (1 << 7) /* USB Device Port Clock [AT572D940HF] */
-+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Decice Port Clock [AT91SAM926x only] */
-+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
-+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
-+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
-+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
-+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
-+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
-+
-+#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-+#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-+#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-+
-+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
-+
-+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
-+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
-+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-+
-+#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
-+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-+
-+#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-+#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
-+#define AT91_PMC_DIV (0xff << 0) /* Divider */
-+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
-+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
-+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
-+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
-+#define AT91_PMC_USBDIV_1 (0 << 28)
-+#define AT91_PMC_USBDIV_2 (1 << 28)
-+#define AT91_PMC_USBDIV_4 (2 << 28)
-+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
-+
-+#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
-+#define AT91_PMC_CSS_SLOW (0 << 0)
-+#define AT91_PMC_CSS_MAIN (1 << 0)
-+#define AT91_PMC_CSS_PLLA (2 << 0)
-+#define AT91_PMC_CSS_PLLB (3 << 0)
-+#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-+#define AT91_PMC_PRES_1 (0 << 2)
-+#define AT91_PMC_PRES_2 (1 << 2)
-+#define AT91_PMC_PRES_4 (2 << 2)
-+#define AT91_PMC_PRES_8 (3 << 2)
-+#define AT91_PMC_PRES_16 (4 << 2)
-+#define AT91_PMC_PRES_32 (5 << 2)
-+#define AT91_PMC_PRES_64 (6 << 2)
-+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
-+#define AT91_PMC_MDIV_1 (0 << 8)
-+#define AT91_PMC_MDIV_2 (1 << 8)
-+#define AT91_PMC_MDIV_3 (2 << 8)
-+#define AT91_PMC_MDIV_4 (3 << 8)
-+
-+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-+
-+#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-+#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-+#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
-+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
-+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
-+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
-+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
-+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
-+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
-+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-+#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_rstc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_rstc.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_rstc.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_rstc.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,38 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_rstc.h
-+ *
-+ * Reset Controller (RSTC) - System peripherals regsters.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_RSTC_H
-+#define AT91_RSTC_H
-+
-+#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
-+#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
-+#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
-+#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
-+
-+#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
-+#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
-+#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
-+#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
-+#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
-+#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
-+#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
-+#define AT91_RSTC_RSTTYP_USER (4 << 8)
-+#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
-+#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
-+
-+#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
-+#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
-+#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
-+#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_spi.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_spi.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/at91_spi.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/at91_spi.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,106 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_spi.h
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * Serial Peripheral Interface (SPI) registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_SPI_H
-+#define AT91_SPI_H
-+
-+#define AT91_SPI_CR 0x00 /* Control Register */
-+#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
-+#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
-+#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
-+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-+
-+#define AT91_SPI_MR 0x04 /* Mode Register */
-+#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
-+#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
-+#define AT91_SPI_PS_FIXED (0 << 1)
-+#define AT91_SPI_PS_VARIABLE (1 << 1)
-+#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
-+#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
-+#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
-+#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
-+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-+#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
-+
-+#define AT91_SPI_RDR 0x08 /* Receive Data Register */
-+#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
-+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-+
-+#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
-+#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
-+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-+
-+#define AT91_SPI_SR 0x10 /* Status Register */
-+#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
-+#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
-+#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
-+#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
-+#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
-+#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
-+#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
-+#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
-+#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
-+#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
-+#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
-+
-+#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
-+#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
-+#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
-+
-+#define AT91_SPI_CSR(n) (0x30 + ((n) * 4))/* Chip Select Registers 0-3 */
-+#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
-+#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
-+#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
-+#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
-+#define AT91_SPI_BITS_8 (0 << 4)
-+#define AT91_SPI_BITS_9 (1 << 4)
-+#define AT91_SPI_BITS_10 (2 << 4)
-+#define AT91_SPI_BITS_11 (3 << 4)
-+#define AT91_SPI_BITS_12 (4 << 4)
-+#define AT91_SPI_BITS_13 (5 << 4)
-+#define AT91_SPI_BITS_14 (6 << 4)
-+#define AT91_SPI_BITS_15 (7 << 4)
-+#define AT91_SPI_BITS_16 (8 << 4)
-+#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
-+#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
-+#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
-+
-+#define AT91_SPI_RPR 0x0100 /* Receive Pointer Register */
-+
-+#define AT91_SPI_RCR 0x0104 /* Receive Counter Register */
-+
-+#define AT91_SPI_TPR 0x0108 /* Transmit Pointer Register */
-+
-+#define AT91_SPI_TCR 0x010c /* Transmit Counter Register */
-+
-+#define AT91_SPI_RNPR 0x0110 /* Receive Next Pointer Register */
-+
-+#define AT91_SPI_RNCR 0x0114 /* Receive Next Counter Register */
-+
-+#define AT91_SPI_TNPR 0x0118 /* Transmit Next Pointer Register */
-+
-+#define AT91_SPI_TNCR 0x011c /* Transmit Next Counter Register */
-+
-+#define AT91_SPI_PTCR 0x0120 /* PDC Transfer Control Register */
-+#define AT91_SPI_RXTEN (0x1 << 0) /* Receiver Transfer Enable */
-+#define AT91_SPI_RXTDIS (0x1 << 1) /* Receiver Transfer Disable */
-+#define AT91_SPI_TXTEN (0x1 << 8) /* Transmitter Transfer Enable */
-+#define AT91_SPI_TXTDIS (0x1 << 9) /* Transmitter Transfer Disable */
-+
-+#define AT91_SPI_PTSR 0x0124 /* PDC Transfer Status Register */
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/clk.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/clk.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/clk.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/clk.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,45 @@
-+/*
-+ * (C) Copyright 2007
-+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARM_ARCH_CLK_H__
-+#define __ASM_ARM_ARCH_CLK_H__
-+
-+#include <asm/arch/hardware.h>
-+
-+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
-+{
-+ return AT91_MASTER_CLOCK;
-+}
-+
-+static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
-+{
-+ return AT91_MASTER_CLOCK;
-+}
-+
-+static inline unsigned long get_mci_clk_rate(void)
-+{
-+ return AT91_MASTER_CLOCK;
-+}
-+
-+#endif /* __ASM_ARM_ARCH_CLK_H__ */
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/gpio.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/gpio.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/gpio.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,367 @@
-+/*
-+ * include/asm-arm/arch-at91/gpio.h
-+ *
-+ * Copyright (C) 2005 HP Labs
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#ifndef __ASM_ARCH_AT91_GPIO_H
-+#define __ASM_ARCH_AT91_GPIO_H
-+
-+#include <asm/io.h>
-+#include <asm/errno.h>
-+#include <asm/arch/at91_pio.h>
-+
-+#define PIN_BASE 32
-+
-+#define MAX_GPIO_BANKS 5
-+
-+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-+
-+#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
-+#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
-+#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
-+#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
-+#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-+#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
-+#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
-+#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
-+#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
-+#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-+#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
-+#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
-+#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
-+#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
-+#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-+#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
-+#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
-+#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
-+#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
-+#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-+#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
-+#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
-+#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
-+#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
-+#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-+#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
-+#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
-+#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
-+#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
-+#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-+#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
-+#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
-+
-+#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
-+#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
-+#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
-+#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
-+#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-+#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
-+#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
-+#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
-+#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
-+#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-+#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
-+#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
-+#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
-+#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
-+#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-+#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
-+#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
-+#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
-+#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
-+#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-+#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
-+#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
-+#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
-+#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
-+#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-+#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
-+#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
-+#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
-+#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
-+#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-+#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
-+#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
-+
-+#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
-+#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
-+#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
-+#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
-+#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-+#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
-+#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
-+#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
-+#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
-+#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-+#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
-+#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
-+#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
-+#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
-+#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-+#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
-+#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
-+#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
-+#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
-+#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-+#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
-+#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
-+#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
-+#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
-+#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-+#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
-+#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
-+#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
-+#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
-+#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-+#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
-+#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
-+
-+#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
-+#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
-+#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
-+#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
-+#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-+#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
-+#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
-+#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
-+#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
-+#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-+#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
-+#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
-+#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
-+#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
-+#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-+#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
-+#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
-+#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
-+#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
-+#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-+#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
-+#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
-+#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
-+#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
-+#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-+#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
-+#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
-+#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
-+#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
-+#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-+#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
-+#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
-+
-+#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
-+#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
-+#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
-+#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
-+#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
-+#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
-+#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
-+#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
-+#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
-+#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
-+#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
-+#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
-+#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
-+#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
-+#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
-+#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
-+#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
-+#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
-+#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
-+#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
-+#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
-+#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
-+#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
-+#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
-+#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
-+#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
-+#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
-+#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
-+#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
-+#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
-+#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
-+#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
-+
-+static unsigned long at91_pios[] = {
-+ AT91_PIOA,
-+ AT91_PIOB,
-+ AT91_PIOC,
-+#ifdef AT91_PIOD
-+ AT91_PIOD,
-+#ifdef AT91_PIOE
-+ AT91_PIOE
-+#endif
-+#endif
-+};
-+
-+static inline void *pin_to_controller(unsigned pin)
-+{
-+ pin -= PIN_BASE;
-+ pin /= 32;
-+ return (void *)(AT91_BASE_SYS + at91_pios[pin]);
-+}
-+
-+static inline unsigned pin_to_mask(unsigned pin)
-+{
-+ pin -= PIN_BASE;
-+ return 1 << (pin % 32);
-+}
-+
-+/*
-+ * mux the pin to the "GPIO" peripheral role.
-+ */
-+static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + PIO_IDR);
-+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+ __raw_writel(mask, pio + PIO_PER);
-+ return 0;
-+}
-+
-+/*
-+ * mux the pin to the "A" internal peripheral role.
-+ */
-+static inline int at91_set_A_periph(unsigned pin, int use_pullup)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + PIO_IDR);
-+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+ __raw_writel(mask, pio + PIO_ASR);
-+ __raw_writel(mask, pio + PIO_PDR);
-+ return 0;
-+}
-+
-+/*
-+ * mux the pin to the "B" internal peripheral role.
-+ */
-+static inline int at91_set_B_periph(unsigned pin, int use_pullup)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + PIO_IDR);
-+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+ __raw_writel(mask, pio + PIO_BSR);
-+ __raw_writel(mask, pio + PIO_PDR);
-+ return 0;
-+}
-+
-+/*
-+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
-+ * configure it for an input.
-+ */
-+static inline int at91_set_gpio_input(unsigned pin, int use_pullup)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + PIO_IDR);
-+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+ __raw_writel(mask, pio + PIO_ODR);
-+ __raw_writel(mask, pio + PIO_PER);
-+ return 0;
-+}
-+
-+/*
-+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
-+ * and configure it for an output.
-+ */
-+static inline int at91_set_gpio_output(unsigned pin, int value)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + PIO_IDR);
-+ __raw_writel(mask, pio + PIO_PUDR);
-+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-+ __raw_writel(mask, pio + PIO_OER);
-+ __raw_writel(mask, pio + PIO_PER);
-+ return 0;
-+}
-+
-+/*
-+ * enable/disable the glitch filter; mostly used with IRQ handling.
-+ */
-+static inline int at91_set_deglitch(unsigned pin, int is_on)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
-+ return 0;
-+}
-+
-+/*
-+ * enable/disable the multi-driver; This is only valid for output and
-+ * allows the output pin to run as an open collector output.
-+ */
-+static inline int at91_set_multi_drive(unsigned pin, int is_on)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
-+ return 0;
-+}
-+
-+static inline int gpio_direction_input(unsigned pin)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ if (!(__raw_readl(pio + PIO_PSR) & mask))
-+ return -EINVAL;
-+ __raw_writel(mask, pio + PIO_ODR);
-+ return 0;
-+}
-+
-+static inline int gpio_direction_output(unsigned pin, int value)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ if (!(__raw_readl(pio + PIO_PSR) & mask))
-+ return -EINVAL;
-+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-+ __raw_writel(mask, pio + PIO_OER);
-+ return 0;
-+}
-+
-+/*
-+ * assuming the pin is muxed as a gpio output, set its value.
-+ */
-+static inline int at91_set_gpio_value(unsigned pin, int value)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+
-+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-+ return 0;
-+}
-+
-+/*
-+ * read the pin's value (works even if it's not muxed as a gpio).
-+ */
-+static inline int at91_get_gpio_value(unsigned pin)
-+{
-+ void *pio = pin_to_controller(pin);
-+ unsigned mask = pin_to_mask(pin);
-+ u32 pdsr;
-+
-+ pdsr = __raw_readl(pio + PIO_PDSR);
-+ return (pdsr & mask) != 0;
-+}
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/hardware.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/hardware.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/hardware.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/hardware.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,37 @@
-+/*
-+ * include/asm-arm/arch-at91/hardware.h
-+ *
-+ * Copyright (C) 2003 SAN People
-+ * Copyright (C) 2003 ATMEL
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include <asm/sizes.h>
-+
-+#if defined(CONFIG_AT572D940HF)
-+#include <asm/arch/at572d940hf.h>
-+#else
-+#error "Unsupported AT572D940HF processor"
-+#endif
-+
-+/*
-+ * container_of - cast a member of a structure out to the containing structure
-+ *
-+ * @ptr: the pointer to the member.
-+ * @type: the type of the container struct this is embedded in.
-+ * @member: the name of the member within the struct.
-+ */
-+#define container_of(ptr, type, member) ({ \
-+ const typeof(((type *)0)->member) *__mptr = (ptr); \
-+ (type *)((char *)__mptr - offsetof(type, member)); })
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/interrupts.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/interrupts.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/interrupts.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/interrupts.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,40 @@
-+/*
-+ * include/asm-arm/arch-at572d940/at91_aic.h
-+ *
-+ * Copyright (C) 2008 Antonio R. Costa
-+ * Copyright (C) ATMEL
-+ *
-+ * Advanced Interrupt Controller (AIC).
-+ * Based on AT572D940 datasheet.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef __AT572D940_INTERRUPTS_H__
-+#define __AT572D940_INTERRUPTS_H__
-+
-+#include <asm/arch/at91_aic.h>
-+
-+typedef void (*irq_handler_t) (unsigned long int);
-+
-+#define SET_IRQ_HANDLER(s,m,h) \
-+do { \
-+ AIC_WRITE(AIC_SMR(s),m); \
-+ AIC_WRITE(AIC_SVR(s),h); \
-+ AIC_WRITE(AIC_IECR,(1<<s)); \
-+} while(0)
-+
-+#define RESET_IRQ_HANDLER(s) \
-+do { \
-+ AIC_WRITE(AIC_SMR(s),0); \
-+ AIC_WRITE(AIC_SVR(s),0); \
-+ AIC_WRITE(AIC_IDCR,(1<<s)); \
-+} while(0)
-+
-+#define IRQ_ACKNOWLEDGE(n) AIC_WRITE(AIC_EOICR,(n))
-+
-+extern reset_irqs(void);
-+#endif /* __AT572D940_INTERRUPTS_H__ */
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/io.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/io.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/io.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/io.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,41 @@
-+/*
-+ * include/asm-arm/arch-at91/io.h
-+ *
-+ * Copyright (C) 2003 SAN People
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __ASM_ARCH_IO_H
-+#define __ASM_ARCH_IO_H
-+
-+#include <asm/io.h>
-+
-+static inline unsigned int at91_sys_read(unsigned int reg_offset)
-+{
-+ void *addr = (void *)AT91_BASE_SYS;
-+
-+ return __raw_readl(addr + reg_offset);
-+}
-+
-+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-+{
-+ void *addr = (void *)AT91_BASE_SYS;
-+
-+ __raw_writel(value, addr + reg_offset);
-+}
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/memory-map.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/memory-map.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/memory-map.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/memory-map.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,37 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARM_ARCH_MEMORYMAP_H__
-+#define __ASM_ARM_ARCH_MEMORYMAP_H__
-+
-+#include <asm/arch/hardware.h>
-+
-+#define USART0_BASE AT91_USART0
-+#define USART1_BASE AT91_USART1
-+#define USART2_BASE AT91_USART2
-+#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
-+
-+#define AT572D940_SDRAM_BASE 0x20000000
-+
-+#endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/mmc.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/mmc.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/mmc.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/mmc.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,355 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * Antonio R. Costa <antonio.costa <at> atmel.com>
-+ * <costa.antonior <at> gmail.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __ASM_AT572D940_MMC_H
-+#define __ASM_AT572D940_MMC_H
-+
-+struct mmc_cid {
-+ unsigned long psn;
-+ unsigned short oid;
-+ unsigned char mid;
-+ unsigned char prv;
-+ unsigned char mdt;
-+ char pnm[7];
-+};
-+
-+/*
-+ * Bitfileds are ugly and not portable,
-+ * So lets redefine the CSD
-+ */
-+
-+typedef unsigned long mmc_csd_t[4];
-+typedef unsigned long sd_csd_t[4];
-+
-+/*
-+ * CSD ver: 2.0 manipulation macros
-+ */
-+
-+/*
-+ * Masks
-+ */
-+
-+#define CSD_2x_VER_MASK 0x3
-+#define CSD_2x_RSVD1_MASK 0x3f
-+#define CSD_2x_TAAC_MASK 0xff
-+#define CSD_2x_NSAC_MASK 0xff
-+#define CSD_2x_TRANSPEED_MASK 0xff
-+
-+#define CSD_2x_CCC_MASK 0xfff
-+#define CSD_2x_RBLEN_MASK 0xff
-+#define CSD_2x_RBP_MASK 0x1
-+#define CSD_2x_WBM_MASK 0x1
-+#define CSD_2x_RBM_MASK 0x1
-+#define CSD_2x_DSRIMP_MASK 0x1
-+#define CSD_2x_RSVD2_MASK 0x3f
-+#define CSD_2x_CSIZE_H_MASK 0x3f
-+
-+#define CSD_2x_CSIZE_MASK 0xffff
-+#define CSD_2x_RSVD3_MASK 0x1
-+#define CSD_2x_ERBL_MASK 0x1
-+#define CSD_2x_SECSIZE_MASK 0x7f
-+#define CSD_2x_WPGS_MASK 0x7f
-+
-+#define CSD_2x_WPGE_MASK 0x1
-+#define CSD_2x_RSVD4_MASK 0x3
-+#define CSD_2x_R2WF_MASK 0x7
-+#define CSD_2x_WBL_MASK 0xf
-+#define CSD_2x_WBP_MASK 0x1
-+#define CSD_2x_RSVD5_MASK 0x1f
-+#define CSD_2x_FFG_MASK 0x1
-+#define CSD_2x_COPY_MASK 0x1
-+#define CSD_2x_PWP_MASK 0x1
-+#define CSD_2x_TWP_MASK 0x1
-+#define CSD_2x_FF_MASK 0x3
-+#define CSD_2x_RSVD6_MASK 0x3
-+#define CSD_2x_CRC_MASK 0x7f
-+#define CSD_2x_ONE_MASK 0x1
-+
-+/*
-+ * Offsets inside the single word
-+ */
-+
-+#define CSD_2x_VER_OFF 30
-+#define CSD_2x_RSVD1_OFF 24
-+#define CSD_2x_TAAC_OFF 16
-+#define CSD_2x_NSAC_OFF 8
-+#define CSD_2x_TRANSPEED_OFF 0
-+
-+#define CSD_2x_CCC_OFF 20
-+#define CSD_2x_RBLEN_OFF 16
-+#define CSD_2x_RBP_OFF 15
-+#define CSD_2x_WBM_OFF 14
-+#define CSD_2x_RBM_OFF 13
-+#define CSD_2x_DSRIMP_OFF 12
-+#define CSD_2x_RSVD2_OFF 6
-+#define CSD_2x_CSIZE_H_OFF 0
-+
-+#define CSD_2x_CSIZE_OFF 16
-+#define CSD_2x_RSVD3_OFF 15
-+#define CSD_2x_ERBL_OFF 14
-+#define CSD_2x_SECSIZE_OFF 7
-+#define CSD_2x_WPGS_OFF 0
-+
-+#define CSD_2x_WPGE_OFF 31
-+#define CSD_2x_RSVD4_OFF 29
-+#define CSD_2x_R2WF_OFF 26
-+#define CSD_2x_WBL_OFF 22
-+#define CSD_2x_WBP_OFF 21
-+#define CSD_2x_RSVD5_OFF 16
-+#define CSD_2x_FFG_OFF 15
-+#define CSD_2x_COPY_OFF 14
-+#define CSD_2x_PWP_OFF 13
-+#define CSD_2x_TWP_OFF 12
-+#define CSD_2x_FF_OFF 10
-+#define CSD_2x_RSVD6_OFF 8
-+#define CSD_2x_CRC_OFF 1
-+#define CSD_2x_ONE_OFF 0
-+
-+/*
-+ * Word in which the field is placed
-+ */
-+
-+#define CSD_2x_VER_W 0
-+#define CSD_2x_RSVD1_W 0
-+#define CSD_2x_TAAC_W 0
-+#define CSD_2x_NSAC_W 0
-+#define CSD_2x_TRANSPEED_W 0
-+
-+#define CSD_2x_CCC_W 1
-+#define CSD_2x_RBLEN_W 1
-+#define CSD_2x_RBP_W 1
-+#define CSD_2x_WBM_W 1
-+#define CSD_2x_RBM_W 1
-+#define CSD_2x_DSRIMP_W 1
-+#define CSD_2x_RSVD2_W 1
-+#define CSD_2x_CSIZE_H_W 1
-+
-+#define CSD_2x_CSIZE_W 2
-+#define CSD_2x_RSVD3_W 2
-+#define CSD_2x_ERBL_W 2
-+#define CSD_2x_SECSIZE_W 2
-+#define CSD_2x_WPGS_W 2
-+
-+#define CSD_2x_WPGE_W 3
-+#define CSD_2x_RSVD4_W 3
-+#define CSD_2x_R2WF_W 3
-+#define CSD_2x_WBL_W 3
-+#define CSD_2x_WBP_W 3
-+#define CSD_2x_RSVD5_W 3
-+#define CSD_2x_FFG_W 3
-+#define CSD_2x_COPY_W 3
-+#define CSD_2x_PWP_W 3
-+#define CSD_2x_TWP_W 3
-+#define CSD_2x_FF_W 3
-+#define CSD_2x_RSVD6_W 3
-+#define CSD_2x_CRC_W 3
-+#define CSD_2x_ONE_W 3
-+
-+/*
-+ * ARC:
-+ * Please note that CSIZE field crosses the word boundary,
-+ * anyway since SD spec 2.0 states that the highest 6 bits
-+ * shall be set to 0s the following macro still works
-+ */
-+
-+#define SD_CSD_2x_CSIZE(pcsd) \
-+ (((unsigned long long) SD_CSD_2x_FIELD(CSIZE,pcsd)) | \
-+ (((unsigned long long) SD_CSD_2x_FIELD(CSIZE_H,pcsd)) << 16))
-+
-+#define SD_CSD_2x_FIELD(name,pcsd) \
-+ ((((unsigned long *)pcsd)[CSD_2x_## name ##_W] >> \
-+ CSD_2x_## name ##_OFF) & CSD_2x_## name ##_MASK)
-+
-+#define CSD_1x_VER_MASK 0x3
-+#define CSD_1x_RSVD1_MASK 0x3f
-+#define CSD_1x_TAAC_MASK 0xff
-+#define CSD_1x_NSAC_MASK 0xff
-+#define CSD_1x_TRANSPEED_MASK 0xff
-+
-+#define CSD_1x_CCC_MASK 0xfff
-+#define CSD_1x_RBLEN_MASK 0xf
-+#define CSD_1x_RBP_MASK 0x1
-+#define CSD_1x_WBM_MASK 0x1
-+#define CSD_1x_RBM_MASK 0x1
-+#define CSD_1x_DSRIMP_MASK 0x1
-+#define CSD_1x_RSVD2_MASK 0x3
-+#define CSD_1x_CSIZE_H_MASK 0x3ff
-+
-+#define CSD_1x_CSIZE_MASK 0x3
-+#define CSD_1x_RCMIN_MASK 0x7
-+#define CSD_1x_RCMAX_MASK 0x7
-+#define CSD_1x_WCMIN_MASK 0x7
-+#define CSD_1x_WCMAX_MASK 0x7
-+#define CSD_1x_CSMUL_MASK 0x7
-+#define CSD_1x_ESBE_MASK 0x1
-+#define CSD_1x_SEC_SIZE_MASK 0x7ff
-+
-+#define CSD_1x_WPGS_MASK 0x7ff
-+#define CSD_1x_WPGE_MASK 0x1
-+#define CSD_1x_RSVD4_MASK 0x3
-+#define CSD_1x_R2WF_MASK 0x7
-+#define CSD_1x_WBL_MASK 0xf
-+#define CSD_1x_WBP_MASK 0x1
-+#define CSD_1x_RSVD5_MASK 0x1f
-+#define CSD_1x_FFG_MASK 0x1
-+#define CSD_1x_COPY_MASK 0x1
-+#define CSD_1x_PWP_MASK 0x1
-+#define CSD_1x_TWP_MASK 0x1
-+#define CSD_1x_FF_MASK 0x3
-+#define CSD_1x_RSVD6_MASK 0x3
-+#define CSD_1x_CRC_MASK 0x7f
-+#define CSD_1x_ONE_MASK 0x1
-+
-+/*
-+ * Offsets inside the single word
-+ */
-+
-+#define CSD_1x_VER_OFF 30
-+#define CSD_1x_RSVD1_OFF 24
-+#define CSD_1x_TAAC_OFF 16
-+#define CSD_1x_NSAC_OFF 8
-+#define CSD_1x_TRANSPEED_OFF 0
-+
-+#define CSD_1x_CCC_OFF 20
-+#define CSD_1x_RBLEN_OFF 16
-+#define CSD_1x_RBP_OFF 15
-+#define CSD_1x_WBM_OFF 14
-+#define CSD_1x_RBM_OFF 13
-+#define CSD_1x_DSRIMP_OFF 12
-+#define CSD_1x_RSVD2_OFF 10
-+#define CSD_1x_CSIZE_H_OFF 0
-+
-+#define CSD_1x_CSIZE_OFF 30
-+#define CSD_1x_RCMIN_OFF 27
-+#define CSD_1x_RCMAX_OFF 24
-+#define CSD_1x_WCMIN_OFF 21
-+#define CSD_1x_WCMAX_OFF 18
-+#define CSD_1x_CSMUL_OFF 15
-+#define CSD_1x_ERBL_OFF 14
-+#define CSD_1x_SECSIZE_OFF 7
-+#define CSD_1x_WPGS_OFF 0
-+
-+#define CSD_1x_WPGE_OFF 31
-+#define CSD_1x_RSVD4_OFF 29
-+#define CSD_1x_R2WF_OFF 26
-+#define CSD_1x_WBL_OFF 22
-+#define CSD_1x_WBP_OFF 21
-+#define CSD_1x_RSVD5_OFF 16
-+#define CSD_1x_FFG_OFF 15
-+#define CSD_1x_COPY_OFF 14
-+#define CSD_1x_PWP_OFF 13
-+#define CSD_1x_TWP_OFF 12
-+#define CSD_1x_FF_OFF 10
-+#define CSD_1x_RSVD6_OFF 8
-+#define CSD_1x_CRC_OFF 1
-+#define CSD_1x_ONE_OFF 0
-+
-+/*
-+ * Word in which the field is placed
-+ */
-+
-+#define CSD_1x_VER_W 0
-+#define CSD_1x_RSVD1_W 0
-+#define CSD_1x_TAAC_W 0
-+#define CSD_1x_NSAC_W 0
-+#define CSD_1x_TRANSPEED_W 0
-+
-+#define CSD_1x_CCC_W 1
-+#define CSD_1x_RBLEN_W 1
-+#define CSD_1x_RBP_W 1
-+#define CSD_1x_WBM_W 1
-+#define CSD_1x_RBM_W 1
-+#define CSD_1x_DSRIMP_W 1
-+#define CSD_1x_RSVD2_W 1
-+#define CSD_1x_CSIZE_H_W 1
-+
-+#define CSD_1x_CSIZE_W 2
-+#define CSD_1x_RCMIN_W 2
-+#define CSD_1x_RCMAX_W 2
-+#define CSD_1x_WCMIN_W 2
-+#define CSD_1x_WCMAX_W 2
-+#define CSD_1x_CSMUL_W 2
-+#define CSD_1x_ERBL_W 2
-+#define CSD_1x_SECSIZE_W 2
-+#define CSD_1x_WPGS_W 2
-+
-+#define CSD_1x_WPGE_W 3
-+#define CSD_1x_RSVD4_W 3
-+#define CSD_1x_R2WF_W 3
-+#define CSD_1x_WBL_W 3
-+#define CSD_1x_WBP_W 3
-+#define CSD_1x_RSVD5_W 3
-+#define CSD_1x_FFG_W 3
-+#define CSD_1x_COPY_W 3
-+#define CSD_1x_PWP_W 3
-+#define CSD_1x_TWP_W 3
-+#define CSD_1x_FF_W 3
-+#define CSD_1x_RSVD6_W 3
-+#define CSD_1x_CRC_W 3
-+#define CSD_1x_ONE_W 3
-+
-+#define SD_CSD_1x_FIELD(name,pcsd) \
-+ ((((unsigned long *)pcsd)[CSD_1x_## name ##_W] >> \
-+ CSD_1x_## name ##_OFF) & CSD_1x_## name ##_MASK)
-+
-+#define SD_CSD_FIELD(name,pcsd) \
-+ ((SD_CSD_1x_FIELD(VER,pcsd) == 0x0) ? \
-+ SD_CSD_1x_FIELD(name,pcsd) : SD_CSD_2x_FIELD(name,pcsd))
-+
-+#define SD_CSD_1x_CSIZE(pcsd) \
-+ (SD_CSD_1x_FIELD(CSIZE,pcsd)+(SD_CSD_1x_FIELD(CSIZE_H,pcsd) << 2))
-+
-+#define SD_CSD_VER(pcsd) \
-+ (SD_CSD_1x_FIELD(VER,pcsd))
-+
-+#define MMC_CSD_VER(pcsd) SD_CSD_VER(pcsd)
-+#define MMC_CSD_FIELD(name,pcsd) SD_CSD_1x_FIELD(name,pcsd)
-+
-+/* MMC Command numbers */
-+#define MMC_CMD_GO_IDLE_STATE 0
-+#define MMC_CMD_SEND_OP_COND 1
-+#define MMC_CMD_ALL_SEND_CID 2
-+#define MMC_CMD_SET_RELATIVE_ADDR 3
-+#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3
-+#define MMC_CMD_SET_DSR 4
-+#define MMC_CMD_SELECT_CARD 7
-+#define MMC_CMD_IF_COND 8
-+#define MMC_CMD_SEND_CSD 9
-+#define MMC_CMD_SEND_CID 10
-+#define MMC_CMD_SEND_STATUS 13
-+#define MMC_CMD_SET_BLOCKLEN 16
-+#define MMC_CMD_READ_SINGLE_BLOCK 17
-+#define MMC_CMD_READ_MULTIPLE_BLOCK 18
-+#define MMC_CMD_WRITE_BLOCK 24
-+#define MMC_CMD_APP_CMD 55
-+
-+#define MMC_ACMD_BUS_WIDTH 6
-+#define MMC_ACMD_SD_SEND_OP_COND 41
-+
-+#define R1_ILLEGAL_COMMAND (1 << 22)
-+#define R1_APP_CMD (1 << 5)
-+
-+#endif /* __ASM_AT572D940_MMC_H */
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/timer.h u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/timer.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at572d940hf/timer.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/asm-arm/arch-at572d940hf/timer.h 2009-01-04 22:02:50.000000000 +0100
-@@ -0,0 +1,30 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Author: Antonio R. Costa
-+ */
-+
-+#ifndef _AT91_TIMER_H_
-+#define _AT91_TIMER_H_
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//include/configs/at572d940hfeb.h u-boot-2009.01-rc1/include/configs/at572d940hfeb.h
---- u-boot-2009.01-rc1-0rig//include/configs/at572d940hfeb.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01-rc1/include/configs/at572d940hfeb.h 2009-01-04 22:04:18.000000000 +0100
-@@ -0,0 +1,285 @@
-+/*
-+ * (C) Copyright 2008
-+ * Antonio R. Costa <antonio.costa <at> atmel.com>
-+ * ATMEL CORP <www.atmel.com>
-+ *
-+ * Configuation settings for the AT572D940HFEB board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* ARM asynchronous clock */
-+/* Miniloader */
-+#define AT91_MAIN_CLOCK 160000000 /* from 12 MHz crystal */
-+#define AT91_MASTER_CLOCK 80000000 /* peripheral = main / 2 */
-+
-+/* ROM Boot */
-+//#define AT91_MAIN_CLOCK 96000000 /* from 18.432 MHz crystal */
-+//#define AT91_MASTER_CLOCK 48000000 /* peripheral = main / 2 */
-+
-+#define CONFIG_SYS_HZ 1000000 /* 1us resolution */
-+
-+#define AT91_CLK_DELAY_CYCLES 256
-+#define AT91_SLOW_CLOCK 32768 /* slow clock */
-+#define CONFIG_SLOW_CLK AT91_SLOW_CLOCK
-+
-+#define AT91_SLOW_FREQ 0
-+#define AT91_SYS_FREQ 1
-+#define AT91_PROC_FREQ 2
-+#define AT91_MASTER_FREQ 3
-+
-+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-+#define CONFIG_AT572D940HF 1 /* It's an Atmel AT572D940HF SoC */
-+#define CONFIG_AT572D940HFEB 1 /* on an AT572D940HFEB Board */
-+#define CONFIG_MACH_AT572D940HFEB 1
-+#define CONFIG_USE_IRQ 1
-+
-+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG 1
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT 1
-+#define CONFIG_SKIP_RELOCATE_UBOOT 1
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_ATMEL_USART 1
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+#undef CONFIG_USART2
-+#define CONFIG_USART3 1 /* USART 3 is DBGU */
-+#define CONFIG_ATMEL_MCI 1
-+#define CONFIG_BOOTDELAY 3
-+/*
-+ * #define CONFIG_BOOTARGS "console=ttyS0,115200 " \
-+ * "root=/dev/mtdblock0 rw rootfstype=jffs2"
-+ */
-+
-+#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-+
-+#define CONFIG_ENV_OVERWRITE 1
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE 1
-+#define CONFIG_BOOTP_BOOTPATH 1
-+#define CONFIG_BOOTP_GATEWAY 1
-+#define CONFIG_BOOTP_HOSTNAME 1
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+//#undef CONFIG_CMD_BDI
-+//#undef CONFIG_CMD_IMI
-+//#undef CONFIG_CMD_NET
-+//#undef CONFIG_CMD_PING
-+
-+#define CONFIG_AUTO_COMPLETE 1
-+#define CONFIG_CMDLINE_EDITING 1
-+
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_LOADS
-+#undef CONFIG_CMD_IMLS
-+#undef CONFIG_CMD_FLASH
-+
-+#define CONFIG_CMD_PING 1
-+#define CONFIG_CMD_DHCP 1
-+#undef CONFIG_CMD_NAND 1
-+#define CONFIG_CMD_USB 1
-+#define CONFIG_CMD_MMC 1
-+// #undef CONFIG_CMD_I2C
-+// #undef CONFIG_CMD_SPI
-+// #define CONFIG_CMD_AT91_SPIMUX 1
-+#define CONFIG_CMD_FAT 1
-+#define CONFIG_CMD_EXT2 1
-+#define CONFIG_CMD_JFFS2 1
-+
-+/* SDRAM */
-+#define CONFIG_NR_DRAM_BANKS 1
-+#define PHYS_SDRAM 0x20000000
-+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-+
-+/* DataFlash */
-+#define CONFIG_HAS_DATAFLASH 1
-+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
-+#define AT91_SPI_CLK 33000000
-+#define DATAFLASH_TCSS (0x1a << 16)
-+#define DATAFLASH_TCHS (0x01 << 24)
-+
-+/* NAND flash */
-+#define NAND_MAX_CHIPS 1
-+#define CONFIG_SYS_MAX_NAND_DEVICE 1
-+#define CONFIG_SYS_NAND_BASE 0x40000000
-+#define CONFIG_SYS_NAND_DBW_8 1
-+
-+#define CONFIG_SYS_FLASH_BASE 0x10000000
-+#define CONFIG_SYS_BOOT_SIZE (7 * 0x1000) /* 7 4K sectors */
-+#define CONFIG_SYS_ENV_ADDR 0x10007000
-+#define CONFIG_SYS_ENV_SIZE 0x1000 /* 4K */
-+
-+#define CONFIG_U_BOOT_BASE 0x10008000
-+#define CONFIG_U_BOOT_SIZE (10 * 0x1000) /* 10 4K sectors */
-+
-+#define CONFIG_MAX_FLASH_SECT 135
-+#define CONFIG_MAX_FLASH_BANKS 1
-+#define CONFIG_FLASH_ERASE_TOUT 120000
-+#define CONFIG_FLASH_WRITE_TOUT 500
-+#define CONFIG_USE_BUFFER_WRITE 1
-+
-+#undef CONFIG_ENV_IS_IN_NVRAM
-+#undef CONFIG_ENV_IS_IN_EEPROM
-+#undef CONFIG_ENV_IS_IN_FLASH
-+#undef CONFIG_ENV_IS_IN_DATAFLASH
-+#undef CONFIG_ENV_IS_IN_NAND
-+#undef CONFIG_ENV_IS_IN_ONENAND
-+
-+#define CONFIG_ENV_IS_NOWHERE 1
-+
-+#define PHYS_FLASH_1 CONFIG_FLASH_BASE
-+
-+/* NOR flash - no real flash on this board */
-+#define CONFIG_SYS_NO_FLASH 1
-+#define CONFIG_SYS_MAX_FLASH_SECT 16
-+#define CONFIG_SYS_MAX_FLASH_BANKS 1
-+#define CONFIG_SYS_BOOT_SIZE 16384
-+#define CONFIG_SYS_U_BOOT_BASE 0x00000000
-+#define CONFIG_SYS_FLASH_ERASE_TOUT 10
-+
-+/* Ethernet */
-+
-+#define CONFIG_MACB 1
-+#define CONFIG_RMII 1
-+#define CONFIG_NET_MULTI 1
-+#define CONFIG_NET_RETRY_COUNT 20
-+#define CONFIG_RESET_PHY_R 1
-+#define CONFIG_ETHADDR 00:11:22:33:AA:BB
-+#define CONFIG_IPADDR 172.16.1.187
-+#define CONFIG_NETMASK 255.255.0.0
-+#define CONFIG_HOSTNAME D940DEB
-+#define CONFIG_SERVERIP 172.16.1.30
-+#define CONFIG_BOOTFILE d940deb.bin
-+
-+/* USB */
-+#define CONFIG_USBH 1
-+#define CONFIG_USB_OHCI_NEW 1
-+#define LITTLEENDIAN 1
-+#define CONFIG_DOS_PARTITION 1
-+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT572D940_UHP_BASE */
-+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at572d940"
-+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-+#define CONFIG_SYS_USB_STORAGE 1
-+
-+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-+
-+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END 0x23e00000
-+
-+#undef CONFIG_USE_DATAFLASH_CS0
-+#undef CONFIG_USE_DATAFLASH_CS1
-+#undef CONFIG_USE_NANDFLASH
-+#define CONFIG_USE_SD 1
-+
-+#ifdef CONFIG_USE_DATAFLASH_CS0
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH 1
-+#define CONFIG_SYS_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-+#define CONFIG_ENV_OFFSET 0x4200
-+#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE 0x4200
-+#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm"
-+
-+#elif CONFIG_USE_DATAFLASH_CS1
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH 1
-+#define CONFIG_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-+#define CONFIG_ENV_OFFSET 0x4200
-+#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE 0x4200
-+#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm"
-+
-+#elif CONFIG_USE_NANDFLASH
-+
-+/* bootstrap + u-boot + env + linux in nandflash */
-+#define CONFIG_ENV_IS_IN_NAND 1
-+#define CONFIG_ENV_OFFSET 0x60000
-+#define CONFIG_ENV_OFFSET_REDUND 0x80000
-+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-+
-+#elif CONFIG_USE_SD
-+//#define CONFIG_ENV_IS_IN_DATAFLASH 1
-+#define CONFIG_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-+#define CONFIG_ENV_OFFSET 0x4200
-+#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE 0x4200
-+
-+#define CONFIG_MMC 1
-+#define CONFIG_SD_CARD_BOOT 1
-+
-+//#define CONFIG_MMC_CLK_OD 1500000
-+//#define CONFIG_MMC_CLK_PP 1500000
-+#define CONFIG_MMC_CLK_OD 20000000
-+#define CONFIG_MMC_CLK_PP 20000000
-+#define CONFIG_MMC_OP_COND (0x401f8000) /* SDHC + voltage rage 2.7-3.3 */
-+
-+#define CONFIG_BOOTCOMMAND "mmcinit; fatload mmc 0:1 0x21400000 uLinux.img; fatload mmc 0:1 0x21100000 initrd.img; bootm 0x21400000"
-+#else
-+#define CONFIG_ENV_SIZE 0x1000
-+
-+#endif
-+
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT "Diopsis U-Boot> "
-+#define CONFIG_SYS_CBSIZE 256
-+#define CONFIG_SYS_MAXARGS 16
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_LONGHELP 1
-+#define CONFIG_CMDLINE_EDITING 1
-+
-+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
-+
-+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-+
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ 4096
-+#define CONFIG_STACKSIZE_FIQ 4096
-+//#error CONFIG_USE_IRQ not supported
-+#endif
-+
-+#endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01-rc1/Makefile
---- u-boot-2009.01-rc1-0rig//Makefile 2009-01-04 22:02:22.000000000 +0100
-+++ u-boot-2009.01-rc1/Makefile 2009-01-04 22:02:50.000000000 +0100
-@@ -2702,6 +2702,12 @@
- @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
-
- ########################################################################
-+# AT572D940HF
-+########################################################################
-+#
-+at572d940hfeb_config : unconfig
-+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at572d940hfeb atmel at572d940hf
-+
- ## ARM Integrator boards - see doc/README-integrator for more info.
- integratorap_config \
- ap_config \
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch
deleted file mode 100644
index bac2f935f..000000000
--- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-016-cmd_mem.patch
+++ /dev/null
@@ -1,412 +0,0 @@
-diff -urN u-boot-2009.01-0rig//common/cmd_mem.c u-boot-2009.01/common/cmd_mem.c
---- u-boot-2009.01-0rig//common/cmd_mem.c 2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/common/cmd_mem.c 2009-01-04 13:27:03.000000000 +0100
-@@ -37,11 +37,120 @@
- #endif
- #include <watchdog.h>
-
-+#include <flash.h>
-+#ifdef CONFIG_SYS_NO_FLASH
-+#define in_flash(x) 0
-+#else
-+#define in_flash(x) (addr2info(x)!=NULL)
-+#endif
-+
-+#ifdef CONFIG_HAS_DATAFLASH
-+#define in_dataflash(x) addr_dataflash(x)
-+#else
-+#define in_dataflash(x) 0
-+#endif
-+
-+#ifdef CONFIG_CMD_MMC
-+#define in_SD_card(x) (mmc2info(x) != 0)
-+#else
-+#define in_SD_card(x) 0
-+#endif
-+
-+
- #ifdef CMD_MEM_DEBUG
- #define PRINTF(fmt,args...) printf (fmt ,##args)
- #else
- #define PRINTF(fmt,args...)
- #endif
-+#if defined(CONFIG_HAS_DATAFLASH)
-+#define DF_PAGE_VALID 0x01
-+#define CONFIG_SYS_DATAFLASH_PAGE_SIZE 1056
-+typedef char dfpagebuf[CONFIG_SYS_DATAFLASH_PAGE_SIZE];
-+dfpagebuf dfcache[3]; // Cache buffers for dataflash
-+unsigned char dfvalid[3]; // if DF_PAGE_VALID is set, then the, cache buffer contents are valid
-+unsigned char dflru[3]; // Least recently used algorithm to determine which buffer to reuse
-+unsigned int dfpage[3]; // TLB for cache, tells which page is loaded into dfcache
-+
-+
-+void flush_mem_cache(void)
-+{
-+ dfvalid[0] = dfvalid[1] = dfvalid[2] = 0;
-+ dflru[0] = 0;
-+ dflru[1] = 1;
-+ dflru[2] = 2;
-+}
-+
-+typedef union {
-+ uchar byte[4];
-+ ulong word;
-+} reg;
-+
-+unsigned int replace(char *p, unsigned int data)
-+{
-+ ulong i;
-+ reg in;
-+ reg out;
-+
-+ in.word = data;
-+ for(i = 0; i <= 3; i++) {
-+ out.byte[0] = *p;
-+ *p++ = in.byte[0];
-+ }
-+ return out.word;
-+}
-+
-+ulong translate(unsigned int addr)
-+{
-+ unsigned int page = (addr) / CONFIG_SYS_DATAFLASH_PAGE_SIZE;
-+ unsigned int index = (addr) - (page * CONFIG_SYS_DATAFLASH_PAGE_SIZE);
-+ unsigned int i,rc;
-+ for(i = 0; i < 2; i++) {
-+ if((page == dfpage[i]) && (dfvalid[i] & DF_PAGE_VALID)) {
-+ if(dflru[0] == i) {
-+ // nothing
-+ } else if(dflru[1] == i) {
-+ // swap with 0
-+ dflru[1] = dflru[0];
-+ dflru[0] = i;
-+ } else {
-+ // shift down
-+ dflru[2] = dflru[1];
-+ dflru[1] = dflru[0];
-+ dflru[0] = i;
-+ }
-+ return (unsigned int) &dfcache[i][index];
-+ }
-+ }
-+ // not found
-+ // use buffer found in dflru[2]
-+ i = dflru[2];
-+ if ((rc = read_dataflash(addr, CONFIG_SYS_DATAFLASH_PAGE_SIZE, dfcache[i])) == DATAFLASH_OK){
-+ dflru[2] = dflru[1];
-+ dflru[1] = dflru[0];
-+ dflru[0] = i;
-+ dfvalid[i] |= DF_PAGE_VALID;
-+ return (unsigned int) &dfcache[i][index];
-+ }
-+ return 0;
-+}
-+
-+
-+
-+void df_writed(unsigned char *ldest, ulong laddr)
-+{
-+
-+}
-+void df_writew(unsigned char *ldest,ushort laddr) {}
-+void df_writeb(unsigned char *ldest, u_char laddr) {}
-+#endif
-+
-+#if defined(CONFIG_HAS_DATAFLASH)
-+void flush_mem_cache(void);
-+ulong translate(unsigned int addr);
-+#else
-+#define flush_mem_cache(x)
-+#define translate(x) x
-+#endif
-
- static int mod_mem(cmd_tbl_t *, int, int, int, char *[]);
-
-@@ -67,7 +176,8 @@
- ulong nbytes, linebytes;
- #endif
- int size;
-- int rc = 0;
-+ int rc = 0;
-+ int done = 0;
-
- /* We use the last specified parameters, unless new ones are
- * entered.
-@@ -106,26 +216,29 @@
- * We buffer all read data, so we can make sure data is read only
- * once, and all accesses are with the specified bus width.
- */
-- nbytes = length * size;
-- do {
-- char linebuf[DISP_LINE_LEN];
-- void* p;
-- linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
--
-- rc = read_dataflash(addr, (linebytes/size)*size, linebuf);
-- p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr;
-- print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size);
--
-- nbytes -= linebytes;
-- addr += linebytes;
-- if (ctrlc()) {
-- rc = 1;
-- break;
-- }
-- } while (nbytes > 0);
--#else
-+ if(in_dataflash(addr)) {
-+ nbytes = length * size;
-+ do {
-+ char linebuf[DISP_LINE_LEN];
-+ void* p;
-+ linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
-+
-+ rc = read_dataflash(addr, (linebytes/size)*size, linebuf);
-+ p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr;
-+ print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size);
-+
-+ nbytes -= linebytes;
-+ addr += linebytes;
-+ if (ctrlc()) {
-+ rc = 1;
-+ break;
-+ }
-+ } while (nbytes > 0);
-+ done = 1;
-+ }
-+#endif
-
--# if defined(CONFIG_BLACKFIN)
-+#if defined(CONFIG_BLACKFIN)
- /* See if we're trying to display L1 inst */
- if (addr_bfin_on_chip_mem(addr)) {
- char linebuf[DISP_LINE_LEN];
-@@ -142,15 +255,15 @@
- break;
- }
- } while (nbytes > 0);
-- } else
--# endif
-+ done = 1;
-+ }
-+#endif
-
-- {
-+ if (!done) {
- /* Print the lines. */
- print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
- addr += size*length;
- }
--#endif
-
- dp_last_addr = addr;
- dp_last_length = length;
-@@ -273,6 +386,8 @@
- int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
- {
- ulong addr1, addr2, count, ngood;
-+ ulong laddr1, laddr2;
-+
- int size;
- int rcode = 0;
-
-@@ -294,12 +409,6 @@
-
- count = simple_strtoul(argv[3], NULL, 16);
-
--#ifdef CONFIG_HAS_DATAFLASH
-- if (addr_dataflash(addr1) | addr_dataflash(addr2)){
-- puts ("Comparison with DataFlash space not supported.\n\r");
-- return 0;
-- }
--#endif
-
- #ifdef CONFIG_BLACKFIN
- if (addr_bfin_on_chip_mem(addr1) || addr_bfin_on_chip_mem(addr2)) {
-@@ -308,9 +417,12 @@
- }
- #endif
-
-+ flush_mem_cache();
- ngood = 0;
-
- while (count-- > 0) {
-+ laddr1 = translate((ulong) addr1);
-+ laddr2 = translate((ulong) addr2);
- if (size == 4) {
- ulong word1 = *(ulong *)addr1;
- ulong word2 = *(ulong *)addr2;
-@@ -359,6 +471,14 @@
- {
- ulong addr, dest, count;
- int size;
-+#ifdef CONFIG_HAS_DATAFLASH
-+ int rc;
-+ unsigned int crc,oldcrc,use_crc;
-+ unsigned int olddata;
-+ char *p;
-+ char *env_crc_check;
-+
-+#endif
-
- if (argc != 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
-@@ -385,13 +505,14 @@
-
- #ifndef CONFIG_SYS_NO_FLASH
- /* check if we are copying to Flash */
-- if ( (addr2info(dest) != NULL)
--#ifdef CONFIG_HAS_DATAFLASH
-- && (!addr_dataflash(dest))
--#endif
-- ) {
-+ if (in_flash(dest)) {
- int rc;
--
-+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_CMD_MMC)
-+ if(in_dataflash(addr) || in_SD_card(addr)) {
-+ puts ("Cannot copy to flash from storage...\n");
-+ return 1;
-+ }
-+#endif
- puts ("Copy to Flash... ");
-
- rc = flash_write ((char *)addr, dest, count*size);
-@@ -405,9 +526,15 @@
- #endif
-
- #if defined(CONFIG_CMD_MMC)
-- if (mmc2info(dest)) {
-+ if (in_SD_card(dest)) {
- int rc;
-
-+#if defined(CONFIG_HAS_DATAFLASH)
-+ if(in_dataflash(addr) || in_SD_card(addr)) {
-+ puts ("Cannot copy to flash-card from another storage location...\n");
-+ return 1;
-+ }
-+#endif
- puts ("Copy to MMC... ");
- switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
- case 0:
-@@ -424,9 +551,12 @@
- return 0;
- }
-
-- if (mmc2info(addr)) {
-+ if (in_SD_card(addr)) {
- int rc;
--
-+ if(in_flash(dest) || in_dataflash(dest) || in_SD_card(dest)) {
-+ puts ("Cannot copy from flash-card from another storage location...\n");
-+ return 1;
-+ }
- puts ("Copy from MMC... ");
- switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
- case 0:
-@@ -445,39 +575,64 @@
- #endif
-
- #ifdef CONFIG_HAS_DATAFLASH
-- /* Check if we are copying from RAM or Flash to DataFlash */
-- if (addr_dataflash(dest) && !addr_dataflash(addr)){
-- int rc;
--
-- puts ("Copy to DataFlash... ");
--
-- rc = write_dataflash (dest, addr, count*size);
--
-+ /* Check if we are copying from Dataflash to RAM */
-+ /* Note: Cannot copy from Dataflash to Flash directly */
-+ env_crc_check = getenv("crc-check");
-+ use_crc = (strcmp(env_crc_check, "on") == 0);
-+ if (in_dataflash(addr)) {
-+ if(in_dataflash(dest) || in_flash(dest) || in_SD_card(dest)) {
-+ puts ("Cannot copy to dataflash from another storage location...\n");
-+ return 1;
-+ }
-+ puts ("Copy from DataFlash...");
-+ rc = read_dataflash(addr, count * size, (char *) dest);
- if (rc != 1) {
- dataflash_perror (rc);
- return (1);
- }
-- puts ("done\n");
-- return 0;
-- }
-
-- /* Check if we are copying from DataFlash to RAM */
-- if (addr_dataflash(addr) && !addr_dataflash(dest)
--#ifndef CONFIG_SYS_NO_FLASH
-- && (addr2info(dest) == NULL)
--#endif
-- ){
-- int rc;
-- rc = read_dataflash(addr, count * size, (char *) dest);
-+ if (use_crc) {
-+ puts ("(Calculating CRC) ... ");
-+ p = (char *) dest + (count * size) + 3;
-+ olddata = replace(p,0);
-+ rc = read_dataflash(addr, (count * size)+4, (char *) dest);
-+ oldcrc = replace(p,olddata);
-+ crc = crc32 (0, (const uchar *) dest, count*size);
-+ if(crc != oldcrc) {
-+ printf("\n\rBad CRC, %x expected, found %x... \n\r",oldcrc,crc);
-+ return 1;
-+ } else {
-+ printf("[0x%x]",crc);
-+ }
-+ }
-+ puts ("done\n\r");
-+ return 0;
-+ } else if (!in_dataflash(addr) && in_dataflash(dest)) {
-+ if(in_dataflash(addr) || in_SD_card(addr)) {
-+ puts ("Cannot copy to dataflash from another storage location...\n");
-+ return 1;
-+ }
-+ puts ("Copy to DataFlash... ");
-+ if (use_crc) {
-+ puts ("(Calulating CRC) ... ");
-+ crc = crc32 (0, (const uchar *) addr, count*size);
-+ // Save CRC in small endian format
-+ printf("= 0x%08x written to [%08x] ... ",crc,(unsigned int) (dest + count * size));
-+ p = (char *) addr+(count*size);
-+ olddata = replace(p,crc);
-+ rc = write_dataflash (dest, addr, count*size+4);
-+ crc = replace((char *) addr+(count*size),olddata);
-+ } else {
-+ rc = write_dataflash (dest, addr, count*size);
-+ }
- if (rc != 1) {
- dataflash_perror (rc);
- return (1);
- }
-+ puts ("done\n");
- return 0;
-- }
--
-- if (addr_dataflash(addr) && addr_dataflash(dest)){
-- puts ("Unsupported combination of source/destination.\n\r");
-+ } else if (in_dataflash(addr) && in_dataflash(dest)){
-+ puts ("Cannot copy between two dataflash areas\n\r");
- return 1;
- }
- #endif
-@@ -490,6 +645,7 @@
- }
- #endif
-
-+ /* Copy between RAM locations, or parallell flash to RAM */
- while (count-- > 0) {
- if (size == 4)
- *((ulong *)dest) = *((ulong *)addr);
-@@ -1011,7 +1167,7 @@
- }
-
- #ifdef CONFIG_HAS_DATAFLASH
-- if (addr_dataflash(addr)){
-+ if (in_dataflash(addr)){
- puts ("Can't modify DataFlash in place. Use cp instead.\n\r");
- return 0;
- }
-