Move AT91 patches for u-boot-2009.01-rc1 to device/Atmel/arch-arm/u-boot/2009.01-rc1

1 files changed, 0 insertions, 576 deletions

diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch
deleted file mode 100644
index 8f71ee043..000000000
--- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch
+++ /dev/null
@@ -1,576 +0,0 @@
-diff -urN u-boot-2008.10-0rig//tools/Makefile u-boot-2008.10/tools/Makefile
---- u-boot-2008.10-0rig//tools/Makefile	2008-12-31 17:51:29.000000000 +0100
-+++ u-boot-2008.10/tools/Makefile	2008-12-31 19:38:15.000000000 +0100
-@@ -37,6 +37,11 @@
- #OBJ_FILES	+= mpc86x_clk.o
- #endif
- 
-+ifeq ($(VENDOR),atmel)
-+BINS+= raw-at91$(SFX) sx-at91$(SFX)
-+OBJS+= raw-at91.o sx-at91.o
-+endif
-+
- LIBFDT_OBJ_FILES	= $(obj)fdt.o $(obj)fdt_ro.o $(obj)fdt_rw.o $(obj)fdt_strerror.o $(obj)fdt_wip.o
- 
- LOGO_H	= $(OBJTREE)/include/bmp_logo.h
-@@ -175,6 +180,14 @@
- 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
- 		$(STRIP) $@
- 
-+$(obj)raw-at91$(SFX):	$(obj)raw-at91.o
-+		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-+		$(STRIP) $@
-+
-+$(obj)sx-at91$(SFX):	$(obj)sx-at91.o
-+		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-+		$(STRIP) $@
-+
- $(obj)envcrc.o:	$(src)envcrc.c
- 		$(CC) -g $(CFLAGS) -c -o $@ $<
- 
-@@ -223,6 +236,12 @@
- $(obj)fdt_wip.o:	$(obj)fdt_wip.c
- 		$(CC) -g $(FIT_CFLAGS) -c -o $@ $<
- 
-+$(obj)sx-at91.o:		$(src)sx-at91.c
-+		$(CC) -g $(CFLAGS) -c -o $@ $<
-+
-+$(obj)raw-at91.o:	$(src)raw-at91.c
-+		$(CC) -g $(CFLAGS) -c -o $@ $<
-+
- subdirs:
- ifeq ($(TOOLSUBDIRS),)
- 		@:
-diff -urN u-boot-2008.10-0rig//tools/raw-at91.c u-boot-2008.10/tools/raw-at91.c
---- u-boot-2008.10-0rig//tools/raw-at91.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2008.10/tools/raw-at91.c	2008-12-31 19:26:23.000000000 +0100
-@@ -0,0 +1,225 @@
-+/*
-+ * xmodem-at91.c
-+ *
-+ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board.
-+ * Created by (C) Copyright 2004
-+ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn.
-+ *
-+ *************************************************************************************
-+ *
-+ * Modified 01-Feb-2005 (C)Copyright 2005
-+ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com
-+ * - edited indentations and changed break usage in switch statement.
-+ * - added "\r" to printf
-+ *
-+ * - build with 
-+ *   gcc sx-at91.c -o sx-at91
-+ *
-+ * - Howto use this program with minicom/xminicom and AT91 
-+ *   start minicom or xminicom
-+ *   edit Options / File transfer protocol, 
-+ *   add a name (for example J) like the following example
-+ *
-+ *   |     Name             Program                 Name U/D FullScr IO-Red. Multi  |
-+ *   | A  zmodem     /usr/bin/sz -vv -b              Y    U    N       Y       Y    |
-+ *   | B  ymodem     /usr/bin/sb -vv                 Y    U    N       Y       Y    |
-+ *   | C  xmodem     /usr/bin/sx -vv                 Y    U    N       Y       N    |
-+ *   | D  zmodem     /usr/bin/rz -vv -b -E           N    D    N       Y       Y    |
-+ *   | E  ymodem     /usr/bin/rb -vv                 N    D    N       Y       Y    |
-+ *   | F  xmodem     /usr/bin/rx -vv                 Y    D    N       Y       N    |
-+ *   | G  kermit     /usr/bin/kermit -i -l %l -s     Y    U    Y       N       N    |
-+ *   | H  kermit     /usr/bin/kermit -i -l %l -r     N    D    Y       N       N    |
-+ *   | I  ascii      /usr/bin/ascii-xfr -dsv         Y    U    N       Y       N    |
-+ *   | J  at91       /home/koan/xmodem/xs-at91       Y    U    Y       N       N    |
-+ *   | K    -                                                                       |
-+ *   | L    -                                                                       |
-+ *
-+ *   save and use it selecting at91 protocol when you start an Xmodem upload to AT91
-+ *
-+ *************************************************************************************
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include     <stdio.h>
-+#include     <stdlib.h>
-+#include     <string.h>
-+#include     <unistd.h>
-+#include     <sys/types.h>
-+#include     <sys/stat.h>
-+#include     <fcntl.h>
-+#include     <termios.h>
-+#include     <errno.h>
-+#include     <time.h>
-+
-+#define	TRUE		1
-+#define	FALSE		0
-+#define LINESIZE	1024
-+
-+/*********/
-+
-+#define SERIAL_DEVICE "/dev/ttyS0"
-+#define MYBAUDRATE B115200
-+
-+/***************SUB PROGRAM*******/
-+
-+int Initial_SerialPort(void)
-+{
-+	int fd;
-+	struct termios options;
-+
-+	fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY );
-+	if ( fd == -1 )
-+	{ 
-+		/*open error!*/
-+		perror("Can't open serial port!");
-+		return -1;
-+	}
-+
-+	/*Get the current options for the port...*/
-+	tcgetattr(fd, &options);
-+
-+	/*Set the baud rates to BAUDRATE...*/
-+	cfsetispeed(&options,MYBAUDRATE);
-+	cfsetospeed(&options,MYBAUDRATE);
-+	tcsetattr(fd, TCSANOW, &options);
-+	if (0 != tcgetattr(fd, &options)) 
-+	{
-+		perror("SetupSerial 1");
-+		return -1;
-+	} 
-+	
-+	/*
-+	 * 8bit Data,no partity,1 stop bit...
-+	 */
-+	options.c_cflag &= ~PARENB;
-+	options.c_cflag &= ~CSTOPB;
-+	options.c_cflag &= ~CSIZE;
-+	options.c_cflag |= CS8;
-+	tcflush(fd,TCIFLUSH);
-+
-+	/***Choosing Raw Input*/
-+	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
-+	options.c_oflag &= ~OPOST; 
-+
-+	/*
-+	 * Set the new options for the port...
-+	 */
-+	if (0 != tcsetattr(fd, TCSANOW, &options))
-+	{
-+ 		perror("SetupSerial error");
-+ 		return -1 ;
-+	}
-+
-+	return fd ;
-+}
-+
-+/******************************/
-+void ClearReceiveBuffer(int fd)
-+{
-+	unsigned char tmp;
-+	while ((read(fd,&tmp,1))>0);
-+	
-+	return;
-+}
-+unsigned char filebuf[ LINESIZE+2 ];
-+unsigned char outbuf[ LINESIZE+2 ];
-+FILE *datafile;
-+int fd;
-+
-+static	unsigned int	ChCnt=0;
-+static	unsigned int	ChIx;
-+unsigned char	GetChar(unsigned char *ch)
-+/* 
-+ * SUCCESS:	Return TRUE
-+ * FAILURE:	Return FALSE
-+ */
-+{
-+  
-+  if(ChCnt == 0) {
-+    ChCnt = fread( filebuf, sizeof(char), LINESIZE, datafile);
-+    ChIx = 0;
-+  }
-+  if(ChCnt > 0) {
-+    *ch = filebuf[ChIx++];
-+    ChCnt--;
-+    return TRUE;
-+  } else {
-+    return FALSE;	/* Reached End of File */
-+  }
-+}
-+
-+/********************************/
-+void	delay()
-+{
-+}
-+
-+int main(int argc,char *argv[])
-+{
-+	char *data_file_name;
-+	int	len;
-+	unsigned char c;
-+	int complete,i,sts;
-+
-+	printf("raw-at91 started...\r\n");
-+	
-+	/* open serial port1 */
-+	if ( (fd = Initial_SerialPort()) == -1)  
-+		return -1 ;
-+
-+	data_file_name = argv[1];
-+
-+	if((datafile=fopen(data_file_name,"rb"))==NULL)
-+	{
-+		perror ("Can't open file!");
-+		return -1 ;
-+	}
-+
-+	/*******************************/
-+	
-+	complete = 0;
-+	/*	ClearReceiveBuffer(fd); */
-+
-+	/* while((read(fd,&ack_id,1))<=0);*/
-+	
-+	/* printf("%c\r\n",ack_id); */
-+	while(!complete)
-+	{
-+	  for(i=0;i < LINESIZE; i++) {		/* A line more than 1024 characters will have problems...*/
-+	    if((sts = GetChar(&outbuf[i]))) {
-+	      /* Sts = Success */
-+	      if((c = outbuf[i]) == '\n') {	/* Found end of Line - Start Processing*/
-+		outbuf[i+1] = '\0';		/* Terminate String*/
-+		break;
-+	      }
-+	    } else {
-+	      /* Sts = Failure - End of File */
-+	      outbuf[i] = '\n';
-+	      outbuf[i+1] = '\0';
-+	      complete = 1;
-+	    }
-+	  }
-+	  printf("%s",outbuf);		/* Inform user */
-+	  len = strlen((char *)outbuf);
-+	  write(fd,outbuf,strlen((char *)outbuf));
-+	  for(i = 0; i < 500000000; i++ ) delay();
-+	  while((read(fd,&c,1))<=0) putchar(c);
-+	  printf("  ");
-+	}
-+	fclose(datafile);
-+	close(fd);
-+	return 0;
-+}
-diff -urN u-boot-2008.10-0rig//tools/sx-at91.c u-boot-2008.10/tools/sx-at91.c
---- u-boot-2008.10-0rig//tools/sx-at91.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2008.10/tools/sx-at91.c	2008-12-31 19:26:23.000000000 +0100
-@@ -0,0 +1,300 @@
-+/*
-+ * xmodem-at91.c
-+ *
-+ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board.
-+ * Created by (C) Copyright 2004
-+ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn.
-+ *
-+ *************************************************************************************
-+ *
-+ * Modified 01-Feb-2005 (C)Copyright 2005
-+ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com
-+ * - edited indentations and changed break usage in switch statement.
-+ * - added "\r" to printf
-+ *
-+ * - build with 
-+ *   gcc sx-at91.c -o sx-at91
-+ *
-+ * - Howto use this program with minicom/xminicom and AT91 
-+ *   start minicom or xminicom
-+ *   edit Options / File transfer protocol, 
-+ *   add a name (for example J) like the following example
-+ *
-+ *   |     Name             Program                 Name U/D FullScr IO-Red. Multi  |
-+ *   | A  zmodem     /usr/bin/sz -vv -b              Y    U    N       Y       Y    |
-+ *   | B  ymodem     /usr/bin/sb -vv                 Y    U    N       Y       Y    |
-+ *   | C  xmodem     /usr/bin/sx -vv                 Y    U    N       Y       N    |
-+ *   | D  zmodem     /usr/bin/rz -vv -b -E           N    D    N       Y       Y    |
-+ *   | E  ymodem     /usr/bin/rb -vv                 N    D    N       Y       Y    |
-+ *   | F  xmodem     /usr/bin/rx -vv                 Y    D    N       Y       N    |
-+ *   | G  kermit     /usr/bin/kermit -i -l %l -s     Y    U    Y       N       N    |
-+ *   | H  kermit     /usr/bin/kermit -i -l %l -r     N    D    Y       N       N    |
-+ *   | I  ascii      /usr/bin/ascii-xfr -dsv         Y    U    N       Y       N    |
-+ *   | J  at91       /home/koan/xmodem/xs-at91       Y    U    Y       N       N    |
-+ *   | K    -                                                                       |
-+ *   | L    -                                                                       |
-+ *
-+ *   save and use it selecting at91 protocol when you start an Xmodem upload to AT91
-+ *
-+ *************************************************************************************
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include     <stdio.h>
-+#include     <stdlib.h>
-+#include     <unistd.h>
-+#include     <sys/types.h>
-+#include     <sys/stat.h>
-+#include     <fcntl.h>
-+#include     <termios.h>
-+#include     <errno.h>
-+#include     <time.h>
-+
-+/*
-+Xmodem Frame form: <SOH><blk #><255-blk #><--128 data bytes--><CRC hi><CRC lo>
-+*/
-+
-+#define XMODEM_SOH 0x01
-+#define XMODEM_STX 0x02
-+#define XMODEM_EOT 0x04
-+#define XMODEM_ACK 0x06
-+#define XMODEM_NAK 0x15
-+#define XMODEM_CRC_CHR	'C'
-+#define XMODEM_CRC_SIZE 2			/* Crc_High Byte + Crc_Low Byte */
-+#define XMODEM_FRAME_ID_SIZE 2 /* Frame_Id + 255-Frame_Id */
-+#define XMODEM_DATA_SIZE_SOH 128  /* for Xmodem protocol */
-+#define XMODEM_DATA_SIZE_STX 1024 /* for 1K xmodem protocol */
-+#define USE_1K_XMODEM 0  /* 1 for use 1k_xmodem 0 for xmodem */
-+
-+#if (USE_1K_XMODEM)
-+	#define XMODEM_DATA_SIZE 	XMODEM_DATA_SIZE_STX
-+	#define XMODEM_HEAD		XMODEM_STX
-+#else
-+	#define XMODEM_DATA_SIZE 	XMODEM_DATA_SIZE_SOH
-+	#define XMODEM_HEAD 		XMODEM_SOH
-+#endif
-+/*********/
-+
-+#define SERIAL_DEVICE "/dev/ttyS0"
-+#define MYBAUDRATE B115200
-+
-+/***************SUB PROGRAM*******/
-+unsigned short GetCrc16 ( char *ptr, unsigned short count )
-+{
-+	unsigned short crc, i;
-+
-+	crc = 0;
-+	while(count--)
-+	{
-+		crc = crc ^ (int) *ptr++ << 8;
-+	
-+		for(i = 0; i < 8; i++)
-+		{
-+			if(crc & 0x8000)
-+				crc = crc << 1 ^ 0x1021;
-+			else			
-+				crc = crc << 1;
-+		}
-+	}
-+
-+	return (crc & 0xFFFF);
-+}
-+
-+/*******************************/
-+int Initial_SerialPort(void)
-+{
-+	int fd;
-+	struct termios options;
-+
-+	fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY );
-+	if ( fd == -1 )
-+	{ 
-+		/*open error!*/
-+		perror("Can't open serial port!");
-+		return -1;
-+	}
-+
-+	/*Get the current options for the port...*/
-+	tcgetattr(fd, &options);
-+
-+	/*Set the baud rates to BAUDRATE...*/
-+	cfsetispeed(&options,MYBAUDRATE);
-+	cfsetospeed(&options,MYBAUDRATE);
-+	tcsetattr(fd, TCSANOW, &options);
-+	if (0 != tcgetattr(fd, &options)) 
-+	{
-+		perror("SetupSerial 1");
-+		return -1;
-+	} 
-+	
-+	/*
-+	 * 8bit Data,no partity,1 stop bit...
-+	 */
-+	options.c_cflag &= ~PARENB;
-+	options.c_cflag &= ~CSTOPB;
-+	options.c_cflag &= ~CSIZE;
-+	options.c_cflag |= CS8;
-+	tcflush(fd,TCIFLUSH);
-+
-+	/***Choosing Raw Input*/
-+	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
-+	options.c_oflag &= ~OPOST; 
-+
-+	/*
-+	 * Set the new options for the port...
-+	 */
-+	if (0 != tcsetattr(fd, TCSANOW, &options))
-+	{
-+ 		perror("SetupSerial error");
-+ 		return -1 ;
-+	}
-+
-+	return fd ;
-+}
-+
-+/******************************/
-+void ClearReceiveBuffer(int fd)
-+{
-+	unsigned char tmp;
-+	while ((read(fd,&tmp,1))>0);
-+	
-+	return;
-+}
-+
-+/********************************/
-+int main(int argc,char *argv[])
-+{
-+	int fd;
-+	char *data_file_name;
-+	char packet_data[ XMODEM_DATA_SIZE ];
-+	char frame_data[ XMODEM_DATA_SIZE + XMODEM_CRC_SIZE + XMODEM_FRAME_ID_SIZE + 1 ];
-+	FILE *datafile;
-+	int complete,retry_num,pack_counter,read_number,write_number,i;
-+	unsigned short crc_value;
-+	unsigned char ack_id;
-+
-+	printf("sx-at91 started...\r\n");
-+	
-+	/* open serial port1 */
-+	if ( (fd = Initial_SerialPort()) == -1)  
-+		return -1 ;
-+
-+	data_file_name = argv[1];
-+
-+	if((datafile=fopen(data_file_name,"rb"))==NULL)
-+	{
-+		perror ("Can't open file!");
-+		return -1 ;
-+	}
-+
-+	/*******************************/
-+	
-+	pack_counter = 0;
-+	complete = 0;
-+	retry_num = 0;
-+	ClearReceiveBuffer(fd);
-+
-+	while((read(fd,&ack_id,1))<=0);
-+	
-+	printf("%c\r\n",ack_id);
-+	ack_id=XMODEM_ACK;
-+	while(!complete)
-+	{
-+		switch(ack_id)
-+		{
-+		case XMODEM_ACK:
-+			retry_num = 0;
-+			pack_counter++;
-+			read_number = fread( packet_data, sizeof(char), XMODEM_DATA_SIZE, datafile);
-+			if(read_number>0)
-+			{
-+				if(read_number<XMODEM_DATA_SIZE_SOH)
-+				{
-+			
-+					printf("Start filling the last frame!\r\n");
-+					for(;read_number<XMODEM_DATA_SIZE;read_number++)
-+						packet_data[read_number] = 0x00;
-+				}
-+				frame_data[0] = XMODEM_HEAD;
-+				frame_data[1] = (char)pack_counter;
-+				frame_data[2] = (char)(255-frame_data[1]);
-+	
-+				for(i=0;i<XMODEM_DATA_SIZE;i++)
-+					frame_data[i+3]=packet_data[i];
-+	
-+				crc_value = GetCrc16(packet_data,XMODEM_DATA_SIZE);
-+				frame_data[XMODEM_DATA_SIZE_SOH+3]=(unsigned char)(crc_value >> 8);
-+				frame_data[XMODEM_DATA_SIZE_SOH+4]=(unsigned char)(crc_value);
-+				write_number = write( fd, frame_data, XMODEM_DATA_SIZE_SOH + 5);
-+				printf("waiting for ACK,%d,%d,...",pack_counter,write_number);
-+				while((read(fd,&ack_id,1))<=0);
-+			
-+				if(ack_id == XMODEM_ACK)
-+					printf("Ok!\r\n");
-+				else
-+					printf("Error!\r\n");
-+			}
-+			else
-+			{
-+				ack_id = XMODEM_EOT;
-+				complete = 1;
-+				printf("Waiting for complete ACK ...");
-+			
-+				while(ack_id != XMODEM_ACK)
-+				{
-+					ack_id = XMODEM_EOT;	
-+					write_number=write(fd,&ack_id,1);
-+					while((read(fd,&ack_id,1))<=0);
-+				}
-+				printf("OK\r\n");
-+		
-+				printf("Sending file complete\r\n");
-+			}
-+		break;
-+
-+		case XMODEM_NAK:
-+			if( retry_num++ > 10) 
-+			{
-+				printf("Retry too many times,Quit!\r\n");
-+				complete = 1;
-+			}
-+			else
-+			{
-+				write_number = write(fd,frame_data,XMODEM_DATA_SIZE + 5);
-+				printf("Retry for ACK,%d,%d...",pack_counter,write_number);
-+				while((read(fd,&ack_id,1))<=0);
-+				
-+				if( ack_id == XMODEM_ACK )
-+					printf("OK\r\n");
-+				else
-+					printf("Error!\r\n");
-+			}
-+		break;
-+
-+		default:
-+			printf("Fatal Error!\r\n");
-+			complete = 1;
-+		break;
-+		}
-+
-+	}
-+
-+	fclose(datafile);
-+	close(fd);
-+
-+	return 0;
-+}