Remove jp BSP which only provide support for linux-2.4

65 files changed, 0 insertions, 4476 deletions

diff --git a/target/device/jp/q5/Makefile.in b/target/device/jp/q5/Makefile.in
deleted file mode 100644
index a95b24546..000000000
--- a/target/device/jp/q5/Makefile.in
+++ /dev/null
@@ -1,10 +0,0 @@
-#JP_Q5_PATH=target/device/jp/q5
-BOARD_PATH=target/device/jp/q5
-
-BR2_PACKAGE_BUSYBOX_CONFIG=$(BOARD_PATH)/busybox.config
-UCLIBC_CONFIG_FILE=$(BOARD_PATH)/uClibc.config.$(ARCH)
-
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
-
-TARGETS+=linux
diff --git a/target/device/jp/q5/busybox.config b/target/device/jp/q5/busybox.config
deleted file mode 100644
index 061e5f445..000000000
--- a/target/device/jp/q5/busybox.config
+++ /dev/null
@@ -1,483 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-HAVE_DOT_CONFIG=y
-
-#
-# General Configuration
-#
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-# CONFIG_FEATURE_DEVFS is not set
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_SELINUX is not set
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-CONFIG_LFS=y
-# USING_CROSS_COMPILER is not set
-EXTRA_CFLAGS_OPTIONS=""
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-PREFIX="./_install"
-
-#
-# Archival Utilities
-#
-# CONFIG_AR is not set
-CONFIG_BUNZIP2=y
-# CONFIG_CPIO is not set
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-CONFIG_GUNZIP=y
-# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
-CONFIG_GZIP=y
-# CONFIG_RPM2CPIO is not set
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-# CONFIG_FEATURE_TAR_FROM is not set
-CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_COMPRESS is not set
-# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
-# CONFIG_UNCOMPRESS is not set
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-# CONFIG_CAL is not set
-CONFIG_CAT=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CMP=y
-# CONFIG_COMM is not set
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-# CONFIG_PRINTENV is not set
-CONFIG_EXPR=y
-CONFIG_FALSE=y
-# CONFIG_FOLD is not set
-CONFIG_HEAD=y
-# CONFIG_FEATURE_FANCY_HEAD is not set
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-# CONFIG_LENGTH is not set
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-# CONFIG_MKFIFO is not set
-CONFIG_MKNOD=y
-CONFIG_MV=y
-# CONFIG_NICE is not set
-# CONFIG_OD is not set
-# CONFIG_PRINTF is not set
-CONFIG_PWD=y
-# CONFIG_REALPATH is not set
-CONFIG_RM=y
-CONFIG_RMDIR=y
-# CONFIG_SEQ is not set
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-# CONFIG_FEATURE_FANCY_SLEEP is not set
-CONFIG_SORT=y
-CONFIG_SORT_BIG=y
-# CONFIG_STAT is not set
-CONFIG_STTY=y
-# CONFIG_SUM is not set
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-
-#
-# test (forced enabled for use with shell)
-#
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-# CONFIG_TR is not set
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-# CONFIG_WATCH is not set
-CONFIG_WC=y
-# CONFIG_WHO is not set
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls and more
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-# CONFIG_DUMPKMAP is not set
-# CONFIG_LOADFONT is not set
-# CONFIG_LOADKMAP is not set
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-# CONFIG_SETKEYCODES is not set
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_RUN_PARTS=y
-CONFIG_START_STOP_DAEMON=y
-CONFIG_WHICH=y
-
-#
-# Linux Ext2 FS Progs
-#
-# CONFIG_CHATTR is not set
-# CONFIG_LSATTR is not set
-
-#
-# Editors
-#
-# CONFIG_AWK is not set
-# CONFIG_PATCH is not set
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-# CONFIG_FEATURE_FIND_NEWER is not set
-# CONFIG_FEATURE_FIND_INUM is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INITRD=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_EXTRA_QUIET=y
-CONFIG_HALT=y
-CONFIG_POWEROFF=y
-CONFIG_REBOOT=y
-# CONFIG_MESG is not set
-
-#
-# Login/Password Management Utilities
-#
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_DELGROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-# CONFIG_FEATURE_U_W_TMP is not set
-CONFIG_LOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_SU=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Common options for adduser, deluser, login, su
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-# CONFIG_CROND is not set
-# CONFIG_CRONTAB is not set
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_EJECT is not set
-# CONFIG_LAST is not set
-# CONFIG_HDPARM is not set
-# CONFIG_MAKEDEVS is not set
-CONFIG_MT=y
-# CONFIG_RX is not set
-CONFIG_STRINGS=y
-CONFIG_TIME=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-CONFIG_FEATURE_2_4_MODULES=y
-# CONFIG_FEATURE_2_6_MODULES is not set
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y
-CONFIG_MODPROBE=y
-CONFIG_RMMOD=y
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-
-#
-# Networking Utilities
-#
-# CONFIG_FEATURE_IPV6 is not set
-# CONFIG_ARPING is not set
-# CONFIG_ETHER_WAKE is not set
-# CONFIG_FAKEIDENTD is not set
-# CONFIG_FTPGET is not set
-# CONFIG_FTPPUT is not set
-CONFIG_HOSTNAME=y
-# CONFIG_HTTPD is not set
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-# CONFIG_FEATURE_IFCONFIG_HW is not set
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
-# CONFIG_FEATURE_IFUPDOWN_IPX is not set
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-# CONFIG_INETD is not set
-# CONFIG_IP is not set
-# CONFIG_IPCALC is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-CONFIG_NETSTAT=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
-# CONFIG_TELNETD is not set
-# CONFIG_TFTP is not set
-# CONFIG_TRACEROUTE is not set
-# CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
-
-#
-# udhcp Server/Client
-#
-CONFIG_UDHCPD=y
-CONFIG_UDHCPC=y
-CONFIG_DUMPLEASES=y
-CONFIG_FEATURE_UDHCP_SYSLOG=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_PIDOF=y
-CONFIG_PS=y
-# CONFIG_RENICE is not set
-# CONFIG_TOP is not set
-CONFIG_UPTIME=y
-# CONFIG_SYSCTL is not set
-
-#
-# Another Bourne-like Shell
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-# CONFIG_ASH_TIMEOUT is not set
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-# CONFIG_ASH_GETOPTS is not set
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-# CONFIG_HUSH is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
-CONFIG_FEATURE_COMMAND_EDITING=y
-CONFIG_FEATURE_COMMAND_HISTORY=15
-CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
-CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
-# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_SH_FANCY_PROMPT=y
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-# CONFIG_FBSET is not set
-# CONFIG_FDFLUSH is not set
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y
-# CONFIG_LOSETUP is not set
-# CONFIG_MKSWAP is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_SWAPONOFF=y
-CONFIG_MOUNT=y
-# CONFIG_NFSMOUNT is not set
-CONFIG_UMOUNT=y
-# CONFIG_FEATURE_MOUNT_FORCE is not set
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-# CONFIG_FEATURE_MTAB_SUPPORT is not set
-# CONFIG_READPROFILE is not set
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
diff --git a/target/device/jp/q5/device_table.txt b/target/device/jp/q5/device_table.txt
deleted file mode 100644
index 8b46ca032..000000000
--- a/target/device/jp/q5/device_table.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times.  Using a device 
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs.  You can
-# do all sorts of interesting things with a device table file.  For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-#   /sbin/foobar        f       2755    0       0       -       -       -       -       -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors.  For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-#   /dev/hda    b       640     0       0       3       0       0       0       -
-#   /dev/hda    b       640     0       0       3       1       1       1       15
-# 
-# Device table entries take the form of:
-# <name>    <type>      <mode>  <uid>   <gid>   <major> <minor> <start> <inc>   <count>
-# where name is the file name,  type can be one of: 
-#       f       A regular file
-#       d       Directory
-#       c       Character special device file
-#       b       Block special device file
-#       p       Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file.  The rest of the entries (major, minor, etc) apply only 
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name>		<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/dev		d	755	0	0	-	-	-	-	-
-/dev/pts	d	755	0	0	-	-	-	-	-
-/tmp		d	1777	0	0	-	-	-	-	-
-/etc		d	755	0	0	-	-	-	-	-
-/home/default	d	2755	1000	1000	-	-	-	-	-
-#<name>					<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/bin/busybox				f	4755	0	0	-	-	-	-	-
-/etc/shadow				f	600	0	0	-	-	-	-	-
-/etc/passwd				f	644	0	0	-	-	-	-	-
-/etc/network/if-up.d			d	755	0	0	-	-	-	-	-
-/etc/network/if-pre-up.d		d	755	0	0	-	-	-	-	-
-/etc/network/if-down.d			d	755	0	0	-	-	-	-	-
-/etc/network/if-post-down.d		d	755	0	0	-	-	-	-	-
-/usr/share/udhcpc/default.script	f	755	0	0	-	-	-	-	-
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev		f	4755	0	0	-	-	-	-	-
-# Normal system devices
-/dev/mem	c	640	0	0	1	1	0	0	-
-/dev/kmem	c	640	0	0	1	2	0	0	-
-/dev/null	c	666	0	0	1	3	0	0	-
-/dev/zero	c	666	0	0	1	5	0	0	-
-/dev/random	c	666	0	0	1	8	0	0	-
-/dev/urandom	c	666	0	0	1	9	0	0	-
-/dev/ram	b	640	0	0	1	1	0	0	-
-/dev/ram	b	640	0	0	1	0	0	1	4
-/dev/loop	b	640	0	0	7	0	0	1	2
-/dev/rtc	c	640	0	0	10	135	-	-	-
-/dev/console	c	666	0	0	5	1	-	-	-
-/dev/tty	c	666	0	0	5	0	-	-	-
-/dev/tty	c	666	0	0	4	0	0	1	8
-/dev/ttyp	c	666	0	0	3	0	0	1	10
-/dev/ptyp	c       666     0       0       2       0       0       1       10
-/dev/ptmx	c	666	0	0	5	2	-	-	-
-/dev/ttyP	c	666	0	0	57	0	0	1	4
-/dev/ttyS	c	666	0	0	4	64	0	1	4
-/dev/fb		c	640	0	5	29	0	0	32	4
-#/dev/ttySA	c	666	0	0	204	5	0	1	3
-/dev/psaux	c	666	0	0	10	1	0	0	-
-#/dev/ppp	c	666	0	0	108	0	-	-	-
-
-# MTD stuff
-/dev/mtd	c	640	0	0	90	0	0	2	4
-/dev/mtdblock	b	640	0	0	31	0	0	1	4
-
-#Tun/tap driver
-/dev/net	d	755	0	0	-	-	-	-	-
-/dev/net/tun	c	660	0	0	10	200	-	-	-
-
-# Audio stuff
-#/dev/audio	c	666	0	29	14	4	-	-	-
-#/dev/audio1	c	666	0	29	14	20	-	-	-
-#/dev/dsp	c	666	0	29	14	3	-	-	-
-#/dev/dsp1	c	666	0	29	14	19	-	-	-
-#/dev/sndstat	c	666	0	29	14	6	-	-	-
-
-# User-mode Linux stuff
-/dev/ubda	b	640	0	0	98	0	0	0	-
-/dev/ubda	b	640	0	0	98	1	1	1	15
-
-# IDE Devices
-/dev/hda	b	640	0	0	3	0	0	0	-
-/dev/hda	b	640	0	0	3	1	1	1	15
-/dev/hdb	b	640	0	0	3	64	0	0	-
-/dev/hdb	b	640	0	0	3	65	1	1	15
-#/dev/hdc	b	640	0	0	22	0	0	0	-
-#/dev/hdc	b	640	0	0	22	1	1	1	15
-#/dev/hdd	b	640	0	0	22	64	0	0	-
-#/dev/hdd	b	640	0	0	22	65	1	1	15
-#/dev/hde	b	640	0	0	33	0	0	0	-
-#/dev/hde	b	640	0	0	33	1	1	1	15
-#/dev/hdf	b	640	0	0	33	64	0	0	-
-#/dev/hdf	b	640	0	0	33	65	1	1	15
-#/dev/hdg	b	640	0	0	34	0	0	0	-
-#/dev/hdg	b	640	0	0	34	1	1	1	15
-#/dev/hdh	b	640	0	0	34	64	0	0	-
-#/dev/hdh	b	640	0	0	34	65	1	1	15
-
-# SCSI Devices
-#/dev/sda	b	640	0	0	8	0	0	0	-
-#/dev/sda	b	640	0	0	8	1	1	1	15
-#/dev/sdb	b	640	0	0	8	16	0	0	-
-#/dev/sdb	b	640	0	0	8	17	1	1	15
-#/dev/sdc	b	640	0	0	8	32	0	0	-
-#/dev/sdc	b	640	0	0	8	33	1	1	15
-#/dev/sdd	b	640	0	0	8	48	0	0	-
-#/dev/sdd	b	640	0	0	8	49	1	1	15
-#/dev/sde	b	640	0	0	8	64	0	0	-
-#/dev/sde	b	640	0	0	8	65	1	1	15
-#/dev/sdf	b	640	0	0	8	80	0	0	-
-#/dev/sdf	b	640	0	0	8	81	1	1	15
-#/dev/sdg	b	640	0	0	8	96	0	0	-
-#/dev/sdg	b	640	0	0	8	97	1	1	15
-#/dev/sdh	b	640	0	0	8	112	0	0	-
-#/dev/sdh	b	640	0	0	8	113	1	1	15
-#/dev/sg	c	640	0	0	21	0	0	1	15
-#/dev/scd	b	640	0	0	11	0	0	1	15
-#/dev/st	c	640	0	0	9	0	0	1	8
-#/dev/nst	c	640	0	0	9	128	0	1	8
-#/dev/st	c	640	0	0	9	32	1	1	4
-#/dev/st	c	640	0	0	9	64	1	1	4
-#/dev/st	c	640	0	0	9	96	1	1	4
-
-# Floppy disk devices
-#/dev/fd	b	640	0	0	2	0	0	1	2
-#/dev/fd0d360	b	640	0	0	2	4	0	0	-
-#/dev/fd1d360	b	640	0	0	2	5	0	0	-
-#/dev/fd0h1200	b	640	0	0	2	8	0	0	-
-#/dev/fd1h1200	b	640	0	0	2	9	0	0	-
-#/dev/fd0u1440	b	640	0	0	2	28	0	0	-
-#/dev/fd1u1440	b	640	0	0	2	29	0	0	-
-#/dev/fd0u2880	b	640	0	0	2	32	0	0	-
-#/dev/fd1u2880	b	640	0	0	2	33	0	0	-
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd	b	640	0	0	29	0	0	0	-
-#/dev/bpcd	b	640	0	0	41	0	0	0	-
-#/dev/capi20	c	640	0	0	68	0	0	1	2
-#/dev/cdu31a	b	640	0	0	15	0	0	0	-
-#/dev/cdu535	b	640	0	0	24	0	0	0	-
-#/dev/cm206cd	b	640	0	0	32	0	0	0	-
-#/dev/sjcd	b	640	0	0	18	0	0	0	-
-#/dev/sonycd	b	640	0	0	15	0	0	0	-
-#/dev/gscd	b	640	0	0	16	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	1	4
-#/dev/mcd	b	640	0	0	23	0	0	0	-
-#/dev/optcd	b	640	0	0	17	0	0	0	-
-
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 b/target/device/jp/q5/kernel-patches-2.4.26/001-q5
deleted file mode 100644
index 70ca0c555..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.26/001-q5
+++ /dev/null
@@ -1,730 +0,0 @@
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile	2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile	2004-02-13 10:04:07.000000000 +0100
-@@ -16,7 +16,7 @@ all: au1000.o
- 
- O_TARGET := au1000.o
- 
--export-objs		= prom.o clocks.o power.o usbdev.o
-+export-objs		= prom.o clocks.o power.o usbdev.o setup.o
- 
- obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \
- 	clocks.o power.o setup.o sleeper.o
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c	2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c	2004-02-13 10:09:43.000000000 +0100
-@@ -105,42 +105,8 @@ void __init pcibios_fixup(void)
- 
- void __init pcibios_fixup_irqs(void)
- {
--#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
--	unsigned int slot, func;
--	unsigned char pin;
--	struct pci_dev *dev;
--
--	pci_for_each_dev(dev) {
--		if (dev->bus->number != 0)
--			return;
--
--		dev->irq = 0xff;
--		slot = PCI_SLOT(dev->devfn);
--#if defined( CONFIG_SOC_AU1500 )
--		switch (slot) {
--			case 12:
--			case 13:
--			default:
--				dev->irq = AU1000_PCI_INTA;
--				break;
--		}
--#elif defined( CONFIG_SOC_AU1550 )
--		switch (slot) {
--			default:
--			case 12:
--				dev->irq = AU1000_PCI_INTA;
--				break;
--			case 13:
--				dev->irq = AU1000_PCI_INTB;
--				break;
--		}
--#endif
--
--		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
--		DBG("slot %d irq %d\n", slot, dev->irq);
--	}
--#endif
- }
-+
- unsigned int pcibios_assign_all_busses(void)
- {
- 	return 0;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c	2004-02-13 01:03:32.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c	2004-02-13 10:07:12.000000000 +0100
-@@ -81,7 +81,7 @@ void  prom_init_cmdline(void)
- }
- 
- 
--char *prom_getenv(char *envname)
-+char *prom_getenv_n(char *envname, int n)
- {
- 	/*
- 	 * Return a pointer to the given environment variable.
-@@ -89,19 +89,24 @@ char *prom_getenv(char *envname)
- 	 */
- 
- 	t_env_var *env = (t_env_var *)prom_envp;
--	int i;
-+	int i, j=0;
- 
- 	i = strlen(envname);
- 
- 	while(env->name) {
- 		if(strncmp(envname, env->name, i) == 0) {
--			return(env->name + strlen(envname) + 1);
-+			if(j++ == n) return(env->name + strlen(envname) + 1);
- 		}
- 		env++;
- 	}
- 	return(NULL);
- }
- 
-+char *prom_getenv(char *envname)
-+{
-+      return prom_getenv_n(envname, 0);
-+}
-+
- inline unsigned char str2hexnum(unsigned char c)
- {
- 	if(c >= '0' && c <= '9')
-@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea,
- 	}
- }
- 
--int get_ethernet_addr(char *ethernet_addr)
-+int get_ethernet_addr_n(char *ethernet_addr, int n)
- {
-         char *ethaddr_str;
- 
--        ethaddr_str = prom_getenv("ethaddr");
-+        ethaddr_str = prom_getenv_n("ethaddr", n);
- 	if (!ethaddr_str) {
- 	        printk("ethaddr not set in boot prom\n");
- 		return -1;
- 	}
- 	str2eaddr(ethernet_addr, ethaddr_str);
- 
--#if 0
-+#if 1
- 	{
- 		int i;
- 
-@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add
- 	return 0;
- }
- 
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+      return get_ethernet_addr_n(ethernet_addr, 0);
-+}
-+
- void prom_free_prom_memory (void) {}
-+EXPORT_SYMBOL(get_ethernet_addr_n);
- EXPORT_SYMBOL(prom_getcmdline);
- EXPORT_SYMBOL(get_ethernet_addr);
- EXPORT_SYMBOL(str2eaddr);
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c	2004-02-13 01:03:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c	2004-02-13 10:04:07.000000000 +0100
-@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops;
- #endif
- 
- extern struct rtc_ops no_rtc_ops;
-+void (*__wbflush) (void);
- extern char * __init prom_getcmdline(void);
- extern void __init board_setup(void);
- extern void au1000_restart(char *);
-@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr(
- extern void au1xxx_time_init(void);
- extern void au1xxx_timer_setup(void);
- 
-+void au1500_wbflush(void)
-+{
-+        __asm__ volatile ("sync");
-+}
-+
- void __init au1x00_setup(void)
- {
- 	char *argptr;
-@@ -89,6 +95,8 @@ void __init au1x00_setup(void)
- 	}
- #endif	  
- 
-+	__wbflush = au1500_wbflush;
-+
- #ifdef CONFIG_FB_AU1100
-     if ((argptr = strstr(argptr, "video=")) == NULL) {
-         argptr = prom_getcmdline();
-@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr(
- 		return phys_addr;
- }
- #endif
-+
-+EXPORT_SYMBOL(__wbflush);
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c	2004-02-13 01:03:28.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c	2004-02-13 10:10:21.000000000 +0100
-@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
- 	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- 	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- 	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
- 	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
- 
- 	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S
---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S	2004-02-13 01:02:42.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S	2004-02-13 10:07:43.000000000 +0100
-@@ -33,7 +33,9 @@
- 		 * Reserved space for exception handlers.
- 		 * Necessary for machines which link their kernels at KSEG0.
- 		 */
--		.fill	0x400
-+		j kernel_entry
-+		nop
-+		.org 0x400
- 
- 		/* The following two symbols are used for kernel profiling. */
- 		EXPORT(stext)
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile
---- linux-2.4.25-rc2_org/arch/mips/Makefile	2004-02-13 01:01:00.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/Makefile	2004-04-09 10:40:09.000000000 +0200
-@@ -69,13 +69,13 @@ endif
- set_gccflags = $(shell \
- while :; do \
- 	cpu=$(1); isa=-$(2); \
--	for gcc_opt in -march= -mcpu=; do \
-+	for gcc_opt in -march=; do \
- 		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- 			-xc /dev/null > /dev/null 2>&1 && \
- 			break 2; \
- 	done; \
- 	cpu=$(3); isa=-$(4); \
--	for gcc_opt in -march= -mcpu=; do \
-+	for gcc_opt in -march=; do \
- 		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- 			-xc /dev/null > /dev/null 2>&1 && \
- 			break 2; \
-@@ -90,7 +90,7 @@ else \
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
--	for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+	for gas_opt in -Wa,-march=; do \
- 		$(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- 			-o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- 			break 2; \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c
---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c	2004-02-12 23:51:10.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c	2004-02-13 10:11:06.000000000 +0100
-@@ -29,6 +29,7 @@
- #include <linux/errno.h>
- #include <linux/init.h>
- #include <linux/input.h>
-+#include <linux/pm.h>
- 
- void kbd_leds(unsigned char leds)
- {
-@@ -140,3 +141,46 @@ void __init kbd_init_hw(void)
- {
- 	printk("Dummy keyboard driver installed.\n");
- }
-+
-+
-+void panic_blink(void)
-+ {
-+ }
-+
-+
-+ int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-+                   char raw_mode)
-+ {
-+   return 0;
-+ }
-+
-+ char pckbd_unexpected_up(unsigned char keycode)
-+ {
-+   return 0;
-+ }
-+
-+
-+ void pckbd_leds(unsigned char leds)
-+ {
-+ }
-+
-+
-+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode)
-+ {
-+   return 0;
-+ }
-+
-+ int pckbd_getkeycode(unsigned int scancode)
-+ {
-+   return 0;
-+ }
-+
-+ void __init pckbd_init_hw(void)
-+ {
-+ }
-+
-+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
-+ {
-+   return 0;
-+ }
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile
---- linux-2.4.25-rc2_org/drivers/char/Makefile	2004-02-12 23:50:40.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/Makefile	2004-02-13 10:11:06.000000000 +0100
-@@ -32,7 +32,7 @@ mod-subdirs	:=	joystick ftape drm drm-4.
- list-multi	:=	
- 
- KEYMAP   =defkeymap.o
--KEYBD    =pc_keyb.o
-+KEYBD    =dummy_keyb.o
- CONSOLE  =console.o
- SERIAL   =serial.o
- 
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c	2004-02-13 00:49:45.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c	2004-03-16 10:04:18.000000000 +0100
-@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i
- 	   or tells us why it failed. */        
- 	dq6 = CMD(1<<6);
- 	dq5 = CMD(1<<5);
--	timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+	timeo = jiffies + HZ; /* setting timeout to 1ms for now */
- 		
- 	oldstatus = cfi_read(map, adr);
- 	status = cfi_read(map, adr);
-@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i
- 			oldstatus = cfi_read(map, adr);
- 			status = cfi_read(map, adr);
- 		    
--			if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
--				printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
--			} else { 
-+			if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) {
- 				/* DQ5 is active so we can do a reset and stop the erase */
- 				cfi_write(map, CMD(0xF0), chip->start);
- 				printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c
---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c	2004-02-13 00:50:09.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c	2004-02-13 10:11:40.000000000 +0100
-@@ -86,28 +86,24 @@ static int                   mtd_parts_n
- #else
- static struct mtd_partition physmap_partitions[] = {
- /* Put your own partition definitions here */
--#if 0
- 	{
--		name:		"bootROM",
--		size:		0x80000,
-+		name:		"fs1",
-+		size:		28*1024*1024,
- 		offset:		0,
--		mask_flags:	MTD_WRITEABLE,  /* force read-only */
- 	}, {
--		name:		"zImage",
--		size:		0x100000,
-+		name:		"bootldr",
-+		size:		128*1024,
- 		offset:		MTDPART_OFS_APPEND,
- 		mask_flags:	MTD_WRITEABLE,  /* force read-only */
- 	}, {
--		name:		"ramdisk.gz",
--		size:		0x300000,
-+		name:		"kernel",
-+		size:		1*1024*1024,
- 		offset:		MTDPART_OFS_APPEND,
--		mask_flags:	MTD_WRITEABLE,  /* force read-only */
- 	}, {
--		name:		"User FS",
-+		name:		"fs2",
- 		size:		MTDPART_SIZ_FULL,
- 		offset:		MTDPART_OFS_APPEND,
- 	}
--#endif
- };
- 
- #define NUM_PARTITIONS	(sizeof(physmap_partitions)/sizeof(struct mtd_partition))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c
---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c	2004-02-12 23:33:59.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c	2004-02-13 10:06:01.000000000 +0100
-@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether
- extern inline void str2eaddr(unsigned char *ea, unsigned char *str);
- extern inline unsigned char str2hexnum(unsigned char c);
- extern char * __init prom_getcmdline(void);
-+extern int get_ethernet_addr_n(char *ethernet_addr, int n);
- 
- /*
-  * Theory of operation
-@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de
- 	return 0;
- }
- 
-+int ns_83847_reset(struct net_device *dev, int phy_addr)
-+ {
-+       s16 mii_control, timeout;
-+
-+ //    printk("ns_reset\n");
-+       mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+       mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
-+       mdelay(1);
-+       for (timeout = 100; timeout > 0; --timeout) {
-+               mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+               if ((mii_control & MII_CNTL_RESET) == 0)
-+                       break;
-+               mdelay(1);
-+       }
-+       if (mii_control & MII_CNTL_RESET) {
-+               printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
-+               return -1;
-+       }
-+       return 0;
-+ }
-+
-+int ns_83847_init(struct net_device *dev, int phy_addr)
-+ {
-+      s16 data;
-+ //    printk("ns_init\n");
-+
-+       /* Stop auto-negotiation */
-+ //    data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ //    mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
-+ //    mdio_write(dev, phy_addr,    0, 0x0000);
-+       mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
-+
-+       /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
-+       data = mdio_read(dev, phy_addr, MII_ANADV);
-+       /* obs PAUSE bit */
-+       data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
-+       mdio_write(dev, phy_addr, MII_ANADV, data);
-+
-+       /* Bypass led stretching? */
-+       data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
-+       data |= MII_NS_PHYCTRL_BP_STRETCH;
-+       mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
-+
-+       /* Restart auto-negotiation */
-+       data = mdio_read(dev, phy_addr, MII_CONTROL);
-+       data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
-+       mdio_write(dev, phy_addr, MII_CONTROL, data);
-+
-+       return 0;
-+ }
-+
-+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
-+ {
-+       u16 mii_data;
-+       struct au1000_private *aup;
-+
-+       if (!dev) {
-+               printk(KERN_ERR "ns_83847_status error: NULL dev\n");
-+               return -1;
-+       }
-+       aup = (struct au1000_private *) dev->priv;
-+
-+       mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
-+ //    printk("ns_status: %04x\n", mii_data);
-+       if (mii_data & MII_STAT_LINK) {
-+               *link = 1;
-+               mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
-+               if (mii_data & MII_NS_PHYSTS_SPEED_10) {
-+                       *speed = IF_PORT_10BASET;
-+                       dev->if_port = IF_PORT_10BASET;
-+               }
-+               else  {
-+                       if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
-+                               *speed = IF_PORT_100BASEFX;
-+                               dev->if_port = IF_PORT_100BASEFX;
-+                       }
-+                       else {
-+                               *speed = IF_PORT_100BASETX;
-+                               dev->if_port = IF_PORT_100BASETX;
-+                       }
-+               }
-+
-+       }
-+       else {
-+               *link = 0;
-+               *speed = 0;
-+               dev->if_port = IF_PORT_UNKNOWN;
-+       }
-+       return 0;
-+ }
-+
-+
-+
- #ifdef CONFIG_MIPS_BOSPORUS
- int stub_init(struct net_device *dev, int phy_addr)
- {
-@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int 
- }
- #endif
- 
-+struct phy_ops ns_83847_ops = {
-+       ns_83847_init,
-+       ns_83847_reset,
-+       ns_83847_status,
-+};
-+
- struct phy_ops bcm_5201_ops = {
- 	bcm_5201_init,
- 	bcm_5201_reset,
-@@ -667,6 +767,7 @@ static struct mii_chip_info {
- 	struct phy_ops *phy_ops;	
- 	int dual_phy;
- } mii_chip_table[] = {
-+	{"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
- 	{"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
- 	{"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
- 	{"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
-@@ -868,6 +969,8 @@ static int mii_probe (struct net_device 
- 			}
- 		}
- 	}
-+	printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
-+	return -1;
- found:
- 
- #ifdef CONFIG_MIPS_BOSPORUS
-@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po
- 	switch (ioaddr) {
- 	case AU1000_ETH0_BASE:
- 	case AU1500_ETH0_BASE:
--		/* check env variables first */
- 		if (!get_ethernet_addr(ethaddr)) { 
- 			memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
- 		} else {
--			/* Check command line */
--			argptr = prom_getcmdline();
--			if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
--				printk(KERN_INFO "%s: No mac address found\n", 
--						dev->name);
--				/* use the hard coded mac addresses */
--			} else {
--				str2eaddr(ethaddr, pmac + strlen("ethaddr="));
--				memcpy(au1000_mac_addr, ethaddr, 
--						sizeof(dev->dev_addr));
--			}
-+			printk(KERN_INFO "%s: No mac address found\n", dev->name);
- 		}
- 		if (ioaddr == AU1000_ETH0_BASE)
- 			aup->enable = (volatile u32 *) 
-@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po
- 
- 	case AU1000_ETH1_BASE:
- 	case AU1500_ETH1_BASE:
-+		if (!get_ethernet_addr_n(ethaddr, 1)) {
-+                        memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
-+                } else {
-+                        printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+                }
- 		if (ioaddr == AU1000_ETH1_BASE)
- 			aup->enable = (volatile u32 *) 
- 				((unsigned long)AU1000_MAC1_ENABLE);
-@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po
- 			aup->enable = (volatile u32 *) 
- 				((unsigned long)AU1500_MAC1_ENABLE);
- 		memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr));
--		dev->dev_addr[4] += 0x10;
- 		setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
- 		aup->mac_id = 1;
- 		au_macs[1] = aup;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h
---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h	2004-02-12 23:33:54.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h	2004-02-13 10:06:01.000000000 +0100
-@@ -86,6 +86,28 @@
- #define MII_STAT_CAN_TX_FDX 0x4000
- #define	MII_STAT_CAN_T4     0x8000
- 
-+/* mii registers for NS 83847 */
-+#define MII_NS_PHYSTS   0x10
-+#define MII_NS_FCSCR    0x14
-+#define MII_NS_RECR     0x15
-+#define MII_NS_PCSR     0x16
-+#define MII_NS_PHYCTRL  0x19
-+#define MII_NS_10BTSCR  0x1a
-+#define MII_NS_CDCTRL   0x1b
-+
-+/* MII_NS_PHYSTS bits */
-+#define MII_NS_PHYSTS_LINK            (1)
-+#define MII_NS_PHYSTS_SPEED_10        (1<<1)
-+#define MII_NS_PHYSTS_DUPLEX_FULL     (1<<2)
-+
-+/* MII_NS_PHYCTRL bits */
-+#define MII_NS_PHYCTRL_BP_STRETCH     (1<<8)
-+
-+/* MII_NS_CDCTRL bits */
-+#define MII_NS_CDCTRL_CD_ENABLE       (1<<15)
-+#define MII_NS_CDCTRL_RISETIME        (1<<11)
-+#define MII_NS_CDCTRL_FALLTIME        (1<<9)
-+
- 
- #define		MII_ID1_OUI_LO		0xFC00	/* low bits of OUI mask */
- #define		MII_ID1_MODEL		0x03F0	/* model number */
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c
---- linux-2.4.25-rc2_org/drivers/net/natsemi.c	2004-02-12 23:29:19.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c	2004-04-22 09:28:51.000000000 +0200
-@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str
- 		goto err_ioremap;
- 	}
- 
--	/* Work around the dropped serial bit. */
-+#ifdef __mips__
-+	if (get_ethernet_addr_n(dev->dev_addr, 2)) {
-+		printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+	}
-+#else
- 	prev_eedata = eeprom_read(ioaddr, 6);
- 	for (i = 0; i < 3; i++) {
- 		int eedata = eeprom_read(ioaddr, i + 7);
-@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str
- 		dev->dev_addr[i*2+1] = eedata >> 7;
- 		prev_eedata = eedata;
- 	}
-+#endif
- 
- 	dev->base_addr = ioaddr;
- 	dev->irq = irq;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h
---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h	2004-02-12 23:47:43.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h	2004-02-13 10:13:40.000000000 +0100
-@@ -302,9 +302,9 @@ typedef struct hermes_response {
- #define hermes_read_reg(hw, off) ((hw)->io_space ? \
- 	inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
- 	readw((hw)->iobase + ( (off) << (hw)->reg_spacing )))
--#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \
--	outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
--	writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )))
-+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \
-+	outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \
-+	writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));}
- 
- #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name))
- #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val)))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h
---- linux-2.4.25-rc2_org/include/asm-mips/au1000.h	2004-02-12 23:06:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h	2004-02-13 10:41:49.000000000 +0100
-@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
- #define INTC_INT_HIGH_AND_LOW_LEVEL    0x7
- 
- /* Interrupt Numbers */
--#define AU1000_UART0_INT          0
-+#define AU1000_UART0_INT          3
- #define AU1000_UART1_INT          1 /* au1000 */
- #define AU1000_UART2_INT          2 /* au1000 */
- 
- #define AU1000_PCI_INTA           1 /* au1500 */
- #define AU1000_PCI_INTB           2 /* au1500 */
- 
--#define AU1000_UART3_INT          3
-+#define AU1000_UART3_INT          0
- 
- #define AU1000_SSI0_INT           4 /* au1000 */
- #define AU1000_SSI1_INT           5 /* au1000 */
-@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
- 
- 
- /* UARTS 0-3 */
--#define UART0_ADDR                0xB1100000
-+#define UART0_ADDR                0xB1400000
- #define UART1_ADDR                0xB1200000
- #define UART2_ADDR                0xB1300000
--#define UART3_ADDR                0xB1400000
-+#define UART3_ADDR                0xB1100000
- #define UART_BASE                 UART0_ADDR
--#define UART_DEBUG_BASE           UART3_ADDR
-+#define UART_DEBUG_BASE           UART0_ADDR
- 
- #define UART_RX		0	/* Receive buffer */
- #define UART_TX		4	/* Transmit buffer */
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h
---- linux-2.4.25-rc2_org/include/asm-mips/page.h	2004-02-12 23:06:14.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/page.h	2004-03-23 14:18:38.000000000 +0100
-@@ -13,7 +13,6 @@
- #include <linux/config.h>
- #include <asm/break.h>
- 
--#ifdef __KERNEL__
- 
- /*
-  * PAGE_SHIFT determines the page size
-@@ -30,6 +29,7 @@
- #define PAGE_SIZE	(1L << PAGE_SHIFT)
- #define PAGE_MASK	(~(PAGE_SIZE-1))
- 
-+#ifdef __KERNEL__
- #ifndef __ASSEMBLY__
- 
- #include <asm/cacheflush.h>
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h
---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h	2004-02-12 23:06:33.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h	2004-02-13 20:42:57.000000000 +0100
-@@ -15,8 +15,11 @@
- 
- #ifdef CONFIG_CPU_HAS_WB
- 
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
-+//extern void (*__wbflush)(void);
-+//extern void wbflush_setup(void);
-+
-+
-+#define __wbflush() { __asm__ volatile ("sync"); }
- 
- #define wbflush()			\
- 	do {				\
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h
---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h	2004-02-12 23:13:05.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h	2004-02-13 10:15:10.000000000 +0100
-@@ -37,6 +37,7 @@
- #endif
- 
- #if defined(__arm__) || defined(__mips__)
-+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus
- typedef u_int   ioaddr_t;
- #else
- typedef u_short	ioaddr_t;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h
---- linux-2.4.25-rc2_org/include/pcmcia/ss.h	2004-02-12 23:13:02.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h	2004-02-13 10:15:32.000000000 +0100
-@@ -112,7 +112,7 @@ typedef struct pccard_mem_map {
-     u_char	map;
-     u_char	flags;
-     u_short	speed;
--    u_long	sys_start, sys_stop;
-+    ioaddr_t	sys_start, sys_stop;
-     u_int	card_start;
- } pccard_mem_map;
- 
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c
---- linux-2.4.25-rc2_org/init/do_mounts.c	2004-02-12 22:59:08.000000000 +0100
-+++ linux-2.4.25-rc2_q/init/do_mounts.c	2004-02-13 10:16:02.000000000 +0100
-@@ -760,8 +760,6 @@ static void __init devfs_make_root(char 
- static void __init mount_root(void)
- {
- #ifdef CONFIG_ROOT_NFS
--       if (MAJOR(ROOT_DEV) == NFS_MAJOR
--           && MINOR(ROOT_DEV) == NFS_MINOR) {
- 		if (mount_nfs_root()) {
- 			sys_chdir("/root");
- 			ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
-@@ -770,7 +768,6 @@ static void __init mount_root(void)
- 		}
- 		printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
- 		ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0);
--	}
- #endif
- 	devfs_make_root(root_device_name);
- 	create_dev("/dev/root", ROOT_DEV, root_device_name);
-
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes
deleted file mode 100644
index a5928504e..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes
+++ /dev/null
@@ -1,81 +0,0 @@
-diff -Naur linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c linux-2.4.26-q5/arch/mips/au1000/common/clocks.c
---- linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c	2003-08-25 07:44:39.000000000 -0400
-+++ linux-2.4.26-q5/arch/mips/au1000/common/clocks.c	2005-06-23 02:52:03.390000000 -0400
-@@ -85,9 +85,8 @@
- 		lcd_clock = sys_busclk / 4;
- 
- 	if (lcd_clock > 50000) /* Epson MAX */
--			printk(__FUNCTION__
--			       ": warning: LCD clock too high (%d KHz)\n",
--			       lcd_clock);
-+			printk("%s: warning: LCD clock too high (%d KHz)\n",
-+			       __FUNCTION__, lcd_clock);
- }
- 
- unsigned int get_au1x00_lcd_clock(void)
---- linux-2.4.26-q5.org/arch/mips/kernel/time.c	2004-02-18 08:36:30.000000000 -0500
-+++ linux-2.4.26-q5/arch/mips/kernel/time.c	2005-06-23 03:13:07.720000000 -0400
-@@ -25,6 +25,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- 
-+#include <asm/compiler.h>
- #include <asm/bootinfo.h>
- #include <asm/cpu.h>
- #include <asm/time.h>
-@@ -242,7 +243,7 @@
- 	__asm__("multu	%1,%2"
- 		: "=h" (res)
- 		: "r" (count), "r" (sll32_usecs_per_cycle)
--		: "lo", "accum");
-+		: "lo", GCC_REG_ACCUM);
- 
- 	/*
- 	 * Due to possible jiffies inconsistencies, we need to check
-@@ -297,7 +298,7 @@
- 	__asm__("multu  %1,%2"
- 		: "=h" (res)
- 		: "r" (count), "r" (quotient)
--		: "lo", "accum");
-+		: "lo", GCC_REG_ACCUM);
- 
- 	/*
- 	 * Due to possible jiffies inconsistencies, we need to check
-@@ -339,7 +340,7 @@
- 				: "r" (timerhi), "m" (timerlo),
- 				  "r" (tmp), "r" (USECS_PER_JIFFY),
- 				  "r" (USECS_PER_JIFFY_FRAC)
--				: "hi", "lo", "accum");
-+				: "hi", "lo", GCC_REG_ACCUM);
- 			cached_quotient = quotient;
- 		}
- 	}
-@@ -353,7 +354,7 @@
- 	__asm__("multu	%1,%2"
- 		: "=h" (res)
- 		: "r" (count), "r" (quotient)
--		: "lo", "accum");
-+		: "lo", GCC_REG_ACCUM);
- 
- 	/*
- 	 * Due to possible jiffies inconsistencies, we need to checkdiff -Naur linux-2.4.26-q5.org/include/asm-mips/compiler.h linux-2.4.26-q5/include/asm-mips/compiler.h
---- linux-2.4.26-q5.org/include/asm-mips/compiler.h	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.26-q5/include/asm-mips/compiler.h	2005-06-23 02:52:25.000000000 -0400
-@@ -0,0 +1,17 @@
-+/*
-+ * Copyright (C) 2004  Maciej W. Rozycki
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef _ASM_COMPILER_H
-+#define _ASM_COMPILER_H
-+
-+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-+#define GCC_REG_ACCUM "$0"
-+#else
-+#define GCC_REG_ACCUM "accum"
-+#endif
-+
-+#endif /* _ASM_COMPILER_H */
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain
deleted file mode 100644
index 53e509d3a..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain
+++ /dev/null
@@ -1,24 +0,0 @@
---- linux-2.4.29/arch/mips/Makefile.orig	2005-03-08 23:24:05.000000000 -0700
-+++ linux-2.4.29/arch/mips/Makefile	2005-03-08 23:27:37.000000000 -0700
-@@ -17,16 +17,16 @@
- # Select the object file format to substitute into the linker script.
- #
- ifdef CONFIG_CPU_LITTLE_ENDIAN
--tool-prefix	= mipsel-linux-
-+#tool-prefix	= mipsel-linux-
- ld-emul		= elf32ltsmip
- else
--tool-prefix	= mips-linux-
-+#tool-prefix	= mips-linux-
- ld-emul		= elf32btsmip
- endif
- 
--ifdef CONFIG_CROSSCOMPILE
--CROSS_COMPILE	= $(tool-prefix)
--endif
-+#ifdef CONFIG_CROSSCOMPILE
-+#CROSS_COMPILE	= $(tool-prefix)
-+#endif
- 
- MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
- 
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/100-version b/target/device/jp/q5/kernel-patches-2.4.26/100-version
deleted file mode 100644
index 813d45f15..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.26/100-version
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux/Makefile.orig	2004-08-18 14:17:14.000000000 -0600
-+++ linux/Makefile	2004-08-18 14:17:54.000000000 -0600
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 4
- SUBLEVEL = 26
--EXTRAVERSION =
-+EXTRAVERSION =-q5
- 
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- 
diff --git a/target/device/jp/q5/kernel-patches-2.4.29/001-q5 b/target/device/jp/q5/kernel-patches-2.4.29/001-q5
deleted file mode 100644
index 5f1af425a..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.29/001-q5
+++ /dev/null
@@ -1,420 +0,0 @@
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile	2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile	2004-02-13 10:04:07.000000000 +0100
-@@ -16,7 +16,7 @@ all: au1000.o
- 
- O_TARGET := au1000.o
- 
--export-objs		= prom.o clocks.o power.o usbdev.o
-+export-objs		= prom.o clocks.o power.o usbdev.o setup.o
- 
- obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \
- 	clocks.o power.o setup.o sleeper.o
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c	2004-02-13 01:03:32.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c	2004-02-13 10:07:12.000000000 +0100
-@@ -81,7 +81,7 @@ void  prom_init_cmdline(void)
- }
- 
- 
--char *prom_getenv(char *envname)
-+char *prom_getenv_n(char *envname, int n)
- {
- 	/*
- 	 * Return a pointer to the given environment variable.
-@@ -89,19 +89,24 @@ char *prom_getenv(char *envname)
- 	 */
- 
- 	t_env_var *env = (t_env_var *)prom_envp;
--	int i;
-+	int i, j=0;
- 
- 	i = strlen(envname);
- 
- 	while(env->name) {
- 		if(strncmp(envname, env->name, i) == 0) {
--			return(env->name + strlen(envname) + 1);
-+			if(j++ == n) return(env->name + strlen(envname) + 1);
- 		}
- 		env++;
- 	}
- 	return(NULL);
- }
- 
-+char *prom_getenv(char *envname)
-+{
-+      return prom_getenv_n(envname, 0);
-+}
-+
- inline unsigned char str2hexnum(unsigned char c)
- {
- 	if(c >= '0' && c <= '9')
-@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea,
- 	}
- }
- 
--int get_ethernet_addr(char *ethernet_addr)
-+int get_ethernet_addr_n(char *ethernet_addr, int n)
- {
-         char *ethaddr_str;
- 
--        ethaddr_str = prom_getenv("ethaddr");
-+        ethaddr_str = prom_getenv_n("ethaddr", n);
- 	if (!ethaddr_str) {
- 	        printk("ethaddr not set in boot prom\n");
- 		return -1;
- 	}
- 	str2eaddr(ethernet_addr, ethaddr_str);
- 
--#if 0
-+#if 1
- 	{
- 		int i;
- 
-@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add
- 	return 0;
- }
- 
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+      return get_ethernet_addr_n(ethernet_addr, 0);
-+}
-+
- void prom_free_prom_memory (void) {}
-+EXPORT_SYMBOL(get_ethernet_addr_n);
- EXPORT_SYMBOL(prom_getcmdline);
- EXPORT_SYMBOL(get_ethernet_addr);
- EXPORT_SYMBOL(str2eaddr);
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c	2004-02-13 01:03:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c	2004-02-13 10:04:07.000000000 +0100
-@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops;
- #endif
- 
- extern struct rtc_ops no_rtc_ops;
-+void (*__wbflush) (void);
- extern char * __init prom_getcmdline(void);
- extern void __init board_setup(void);
- extern void au1000_restart(char *);
-@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr(
- extern void au1xxx_time_init(void);
- extern void au1xxx_timer_setup(void);
- 
-+void au1500_wbflush(void)
-+{
-+        __asm__ volatile ("sync");
-+}
-+
- void __init au1x00_setup(void)
- {
- 	char *argptr;
-@@ -89,6 +95,8 @@ void __init au1x00_setup(void)
- 	}
- #endif	  
- 
-+	__wbflush = au1500_wbflush;
-+
- #ifdef CONFIG_FB_AU1100
-     if ((argptr = strstr(argptr, "video=")) == NULL) {
-         argptr = prom_getcmdline();
-@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr(
- 		return phys_addr;
- }
- #endif
-+
-+EXPORT_SYMBOL(__wbflush);
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S
---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S	2004-02-13 01:02:42.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S	2004-02-13 10:07:43.000000000 +0100
-@@ -33,7 +33,9 @@
- 		 * Reserved space for exception handlers.
- 		 * Necessary for machines which link their kernels at KSEG0.
- 		 */
--		.fill	0x400
-+		j kernel_entry
-+		nop
-+		.org 0x400
- 
- 		/* The following two symbols are used for kernel profiling. */
- 		EXPORT(stext)
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile
---- linux-2.4.25-rc2_org/arch/mips/Makefile	2004-02-13 01:01:00.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/Makefile	2004-04-09 10:40:09.000000000 +0200
-@@ -69,13 +69,13 @@ endif
- set_gccflags = $(shell \
- while :; do \
- 	cpu=$(1); isa=-$(2); \
--	for gcc_opt in -march= -mcpu=; do \
-+	for gcc_opt in -march=; do \
- 		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- 			-xc /dev/null > /dev/null 2>&1 && \
- 			break 2; \
- 	done; \
- 	cpu=$(3); isa=-$(4); \
--	for gcc_opt in -march= -mcpu=; do \
-+	for gcc_opt in -march=; do \
- 		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- 			-xc /dev/null > /dev/null 2>&1 && \
- 			break 2; \
-@@ -90,7 +90,7 @@ else \
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
--	for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+	for gas_opt in -Wa,-march=; do \
- 		$(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- 			-o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- 			break 2; \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c
---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c	2004-02-12 23:51:10.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c	2004-02-13 10:11:06.000000000 +0100
-@@ -29,6 +29,7 @@
- #include <linux/errno.h>
- #include <linux/init.h>
- #include <linux/input.h>
-+#include <linux/pm.h>
- 
- void kbd_leds(unsigned char leds)
- {
-@@ -140,3 +141,46 @@ void __init kbd_init_hw(void)
- {
- 	printk("Dummy keyboard driver installed.\n");
- }
-+
-+
-+void panic_blink(void)
-+ {
-+ }
-+
-+
-+ int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-+                   char raw_mode)
-+ {
-+   return 0;
-+ }
-+
-+ char pckbd_unexpected_up(unsigned char keycode)
-+ {
-+   return 0;
-+ }
-+
-+
-+ void pckbd_leds(unsigned char leds)
-+ {
-+ }
-+
-+
-+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode)
-+ {
-+   return 0;
-+ }
-+
-+ int pckbd_getkeycode(unsigned int scancode)
-+ {
-+   return 0;
-+ }
-+
-+ void __init pckbd_init_hw(void)
-+ {
-+ }
-+
-+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
-+ {
-+   return 0;
-+ }
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile
---- linux-2.4.25-rc2_org/drivers/char/Makefile	2004-02-12 23:50:40.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/Makefile	2004-02-13 10:11:06.000000000 +0100
-@@ -32,7 +32,7 @@ mod-subdirs	:=	joystick ftape drm drm-4.
- list-multi	:=	
- 
- KEYMAP   =defkeymap.o
--KEYBD    =pc_keyb.o
-+KEYBD    =dummy_keyb.o
- CONSOLE  =console.o
- SERIAL   =serial.o
- 
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c	2004-02-13 00:49:45.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c	2004-03-16 10:04:18.000000000 +0100
-@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i
- 	   or tells us why it failed. */        
- 	dq6 = CMD(1<<6);
- 	dq5 = CMD(1<<5);
--	timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+	timeo = jiffies + HZ; /* setting timeout to 1ms for now */
- 		
- 	oldstatus = cfi_read(map, adr);
- 	status = cfi_read(map, adr);
-@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i
- 			oldstatus = cfi_read(map, adr);
- 			status = cfi_read(map, adr);
- 		    
--			if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
--				printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
--			} else { 
-+			if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) {
- 				/* DQ5 is active so we can do a reset and stop the erase */
- 				cfi_write(map, CMD(0xF0), chip->start);
- 				printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c
---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c	2004-02-13 00:50:09.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c	2004-02-13 10:11:40.000000000 +0100
-@@ -86,28 +86,24 @@ static int                   mtd_parts_n
- #else
- static struct mtd_partition physmap_partitions[] = {
- /* Put your own partition definitions here */
--#if 0
- 	{
--		name:		"bootROM",
--		size:		0x80000,
-+		name:		"fs1",
-+		size:		28*1024*1024,
- 		offset:		0,
--		mask_flags:	MTD_WRITEABLE,  /* force read-only */
- 	}, {
--		name:		"zImage",
--		size:		0x100000,
-+		name:		"bootldr",
-+		size:		128*1024,
- 		offset:		MTDPART_OFS_APPEND,
- 		mask_flags:	MTD_WRITEABLE,  /* force read-only */
- 	}, {
--		name:		"ramdisk.gz",
--		size:		0x300000,
-+		name:		"kernel",
-+		size:		1*1024*1024,
- 		offset:		MTDPART_OFS_APPEND,
--		mask_flags:	MTD_WRITEABLE,  /* force read-only */
- 	}, {
--		name:		"User FS",
-+		name:		"fs2",
- 		size:		MTDPART_SIZ_FULL,
- 		offset:		MTDPART_OFS_APPEND,
- 	}
--#endif
- };
- 
- #define NUM_PARTITIONS	(sizeof(physmap_partitions)/sizeof(struct mtd_partition))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c
---- linux-2.4.25-rc2_org/drivers/net/natsemi.c	2004-02-12 23:29:19.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c	2004-04-22 09:28:51.000000000 +0200
-@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str
- 		goto err_ioremap;
- 	}
- 
--	/* Work around the dropped serial bit. */
-+#ifdef __mips__
-+	if (get_ethernet_addr_n(dev->dev_addr, 2)) {
-+		printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+	}
-+#else
- 	prev_eedata = eeprom_read(ioaddr, 6);
- 	for (i = 0; i < 3; i++) {
- 		int eedata = eeprom_read(ioaddr, i + 7);
-@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str
- 		dev->dev_addr[i*2+1] = eedata >> 7;
- 		prev_eedata = eedata;
- 	}
-+#endif
- 
- 	dev->base_addr = ioaddr;
- 	dev->irq = irq;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h
---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h	2004-02-12 23:47:43.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h	2004-02-13 10:13:40.000000000 +0100
-@@ -302,9 +302,9 @@ typedef struct hermes_response {
- #define hermes_read_reg(hw, off) ((hw)->io_space ? \
- 	inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
- 	readw((hw)->iobase + ( (off) << (hw)->reg_spacing )))
--#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \
--	outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
--	writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )))
-+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \
-+	outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \
-+	writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));}
- 
- #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name))
- #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val)))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h
---- linux-2.4.25-rc2_org/include/asm-mips/page.h	2004-02-12 23:06:14.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/page.h	2004-03-23 14:18:38.000000000 +0100
-@@ -13,7 +13,6 @@
- #include <linux/config.h>
- #include <asm/break.h>
- 
--#ifdef __KERNEL__
- 
- /*
-  * PAGE_SHIFT determines the page size
-@@ -30,6 +29,7 @@
- #define PAGE_SIZE	(1L << PAGE_SHIFT)
- #define PAGE_MASK	(~(PAGE_SIZE-1))
- 
-+#ifdef __KERNEL__
- #ifndef __ASSEMBLY__
- 
- #include <asm/cacheflush.h>
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h
---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h	2004-02-12 23:06:33.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h	2004-02-13 20:42:57.000000000 +0100
-@@ -15,8 +15,11 @@
- 
- #ifdef CONFIG_CPU_HAS_WB
- 
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
-+//extern void (*__wbflush)(void);
-+//extern void wbflush_setup(void);
-+
-+
-+#define __wbflush() { __asm__ volatile ("sync"); }
- 
- #define wbflush()			\
- 	do {				\
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h
---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h	2004-02-12 23:13:05.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h	2004-02-13 10:15:10.000000000 +0100
-@@ -37,6 +37,7 @@
- #endif
- 
- #if defined(__arm__) || defined(__mips__)
-+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus
- typedef u_int   ioaddr_t;
- #else
- typedef u_short	ioaddr_t;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h
---- linux-2.4.25-rc2_org/include/pcmcia/ss.h	2004-02-12 23:13:02.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h	2004-02-13 10:15:32.000000000 +0100
-@@ -112,7 +112,7 @@ typedef struct pccard_mem_map {
-     u_char	map;
-     u_char	flags;
-     u_short	speed;
--    u_long	sys_start, sys_stop;
-+    ioaddr_t	sys_start, sys_stop;
-     u_int	card_start;
- } pccard_mem_map;
- 
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c
---- linux-2.4.25-rc2_org/init/do_mounts.c	2004-02-12 22:59:08.000000000 +0100
-+++ linux-2.4.25-rc2_q/init/do_mounts.c	2004-02-13 10:16:02.000000000 +0100
-@@ -760,8 +760,6 @@ static void __init devfs_make_root(char 
- static void __init mount_root(void)
- {
- #ifdef CONFIG_ROOT_NFS
--       if (MAJOR(ROOT_DEV) == NFS_MAJOR
--           && MINOR(ROOT_DEV) == NFS_MINOR) {
- 		if (mount_nfs_root()) {
- 			sys_chdir("/root");
- 			ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
-@@ -770,7 +768,6 @@ static void __init mount_root(void)
- 		}
- 		printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
- 		ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0);
--	}
- #endif
- 	devfs_make_root(root_device_name);
- 	create_dev("/dev/root", ROOT_DEV, root_device_name);
-
diff --git a/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain
deleted file mode 100644
index 53e509d3a..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.29/004-correct_toolchain
+++ /dev/null
@@ -1,24 +0,0 @@
---- linux-2.4.29/arch/mips/Makefile.orig	2005-03-08 23:24:05.000000000 -0700
-+++ linux-2.4.29/arch/mips/Makefile	2005-03-08 23:27:37.000000000 -0700
-@@ -17,16 +17,16 @@
- # Select the object file format to substitute into the linker script.
- #
- ifdef CONFIG_CPU_LITTLE_ENDIAN
--tool-prefix	= mipsel-linux-
-+#tool-prefix	= mipsel-linux-
- ld-emul		= elf32ltsmip
- else
--tool-prefix	= mips-linux-
-+#tool-prefix	= mips-linux-
- ld-emul		= elf32btsmip
- endif
- 
--ifdef CONFIG_CROSSCOMPILE
--CROSS_COMPILE	= $(tool-prefix)
--endif
-+#ifdef CONFIG_CROSSCOMPILE
-+#CROSS_COMPILE	= $(tool-prefix)
-+#endif
- 
- MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
- 
diff --git a/target/device/jp/q5/kernel-patches-2.4.29/100-version b/target/device/jp/q5/kernel-patches-2.4.29/100-version
deleted file mode 100644
index 7e420d1ff..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.29/100-version
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux/Makefile.orig	2004-08-18 14:17:14.000000000 -0600
-+++ linux/Makefile	2004-08-18 14:17:54.000000000 -0600
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 4
- SUBLEVEL = 29
--EXTRAVERSION =
-+EXTRAVERSION =-q5
- 
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- 
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 b/target/device/jp/q5/kernel-patches-2.4.32/001-q5
deleted file mode 100644
index 1e2718a7a..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/001-q5
+++ /dev/null
@@ -1,342 +0,0 @@
-diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile
---- linux-2.4.31.org/arch/mips/Makefile	2005-01-19 09:09:26.000000000 -0500
-+++ linux-2.4.31/arch/mips/Makefile	2005-09-10 17:29:44.000000000 -0400
-@@ -241,6 +241,16 @@
- endif
- 
- #
-+# jp-embedded Q5 board
-+#
-+ifdef CONFIG_MIPS_Q5
-+LIBS		+= arch/mips/jp-embedded/q5/q5.o \
-+		   arch/mips/au1000/common/au1000.o
-+SUBDIRS		+= arch/mips/jp-embedded/q5 arch/mips/au1000/common
-+LOADADDR	:= 0x80100000
-+endif
-+
-+#
- # Au1x00 (AMD/Alchemy) eval boards
- #
- ifdef CONFIG_MIPS_DB1000
-diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c	2005-01-19 09:09:26.000000000 -0500
-+++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c	2005-09-10 17:47:29.000000000 -0400
-@@ -101,7 +101,7 @@
- 
- void __init pcibios_fixup_irqs(void)
- {
--#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
-+#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 )
- 	unsigned int slot;
- 	unsigned char pin;
- 	struct pci_dev *dev;
-diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in
---- linux-2.4.31.org/arch/mips/config-shared.in	2005-01-19 09:09:27.000000000 -0500
-+++ linux-2.4.31/arch/mips/config-shared.in	2005-08-23 00:30:32.000000000 -0400
-@@ -31,6 +31,7 @@
- dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
-+dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32
- dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
- dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
- dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
-@@ -277,6 +278,12 @@
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
-+if [ "$CONFIG_MIPS_Q5" = "y" ]; then
-+   define_bool CONFIG_SOC_AU1X00 y
-+   define_bool CONFIG_SOC_AU1500 y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_PC_KEYB y
-+fi
- if [ "$CONFIG_MIPS_DB1000" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
-    define_bool CONFIG_SOC_AU1000 y
-@@ -729,6 +736,7 @@
-      "$CONFIG_MIPS_PB1000" = "y" -o \
-      "$CONFIG_MIPS_PB1100" = "y" -o \
-      "$CONFIG_MIPS_PB1500" = "y" -o \
-+     "$CONFIG_MIPS_Q5" = "y" -o \
-      "$CONFIG_NEC_OSPREY" = "y" -o \
-      "$CONFIG_NEC_EAGLE" = "y" -o \
-      "$CONFIG_NINO" = "y" -o \
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile	2005-09-10 16:46:20.000000000 -0400
-@@ -0,0 +1,9 @@
-+USE_STANDARD_AS_RULE := true
-+
-+O_TARGET := q5.o
-+
-+export-objs = init.o
-+
-+obj-y := init.o board_setup.o irqmap.o
-+
-+include $(TOPDIR)/Rules.make
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c	2005-08-30 14:46:21.000000000 -0400
-@@ -0,0 +1,97 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/console.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/delay.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/keyboard.h>
-+#include <asm/mipsregs.h>
-+#include <asm/reboot.h>
-+#include <asm/pgtable.h>
-+#include <asm/au1000.h>
-+#include <asm/pb1500.h>
-+
-+#ifdef CONFIG_USB_OHCI
-+// Enable the workaround for the OHCI DoneHead
-+// register corruption problem.
-+#define CONFIG_AU1000_OHCI_FIX
-+#endif
-+
-+#ifdef CONFIG_RTC
-+extern struct rtc_ops pb1500_rtc_ops;
-+#endif
-+
-+void board_reset (void)
-+{
-+    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */
-+    au_writel(0x00000000, 0xAE00001C);
-+}
-+
-+void __init board_setup(void)
-+{
-+	u32 pin_func;
-+	u32 sys_freqctrl, sys_clksrc;
-+
-+#ifdef CONFIG_PCI
-+	// Setup PCI bus controller
-+	au_writel(0, Au1500_PCI_CMEM);
-+	au_writel(0x00003fff, Au1500_CFG_BASE);
-+	au_writel(0xf, Au1500_PCI_CFG);
-+	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-+	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-+	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-+	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-+	au_writel(0x00000008, Au1500_PCI_MBAR);
-+	au_sync();
-+#endif
-+
-+	/* Enable sys bus clock divider when IDLE state or no bus activity. */
-+	au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-+
-+#ifdef CONFIG_RTC
-+	rtc_ops = &pb1500_rtc_ops;
-+	// Enable the RTC if not already enabled
-+	if (!(au_readl(0xac000028) & 0x20)) {
-+		printk("enabling clock ...\n");
-+		au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
-+	}
-+	// Put the clock in BCD mode
-+	if (readl(0xac00002C) & 0x4) { /* reg B */
-+		au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
-+		au_sync();
-+	}
-+#endif
-+}
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c	2005-09-10 16:43:21.000000000 -0400
-@@ -0,0 +1,80 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+
-+int prom_argc;
-+char **prom_argv, **prom_envp;
-+extern void  __init prom_init_cmdline(void);
-+extern char *prom_getenv(char *envname);
-+void (*__wbflush) (void);
-+
-+void au1500_wbflush(void)
-+{
-+	__asm__ volatile ("sync");
-+}
-+
-+const char *get_system_type(void)
-+{
-+	return "jp-embedded Q5";
-+}
-+
-+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-+{
-+	unsigned char *memsize_str;
-+	unsigned long memsize;
-+
-+	prom_argc = argc;
-+	prom_argv = argv;
-+	prom_envp = envp;
-+
-+	__wbflush = au1500_wbflush;
-+
-+        /* obs */
-+	mips_machgroup = MACH_GROUP_ALCHEMY;
-+	mips_machtype = MACH_PB1500;
-+
-+	prom_init_cmdline();
-+	memsize_str = prom_getenv("memsize");
-+	if (!memsize_str) {
-+		memsize = 0x04000000;
-+	} else {
-+		memsize = simple_strtol(memsize_str, NULL, 0);
-+	}
-+	add_memory_region(0, memsize, BOOT_MEM_RAM);
-+	return 0;
-+}
-+
-+EXPORT_SYMBOL(__wbflush);
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c	2005-09-10 16:45:18.000000000 -0400
-@@ -0,0 +1,61 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/timex.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/delay.h>
-+
-+#include <asm/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <asm/mipsregs.h>
-+#include <asm/system.h>
-+#include <asm/au1000.h>
-+
-+au1xxx_irq_map_t au1xxx_irq_map[] = {
-+	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
-+	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
-+	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-+};
-+
-+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-+
---- linux-2.4.31.org/Documentation/Configure.help	2005-04-03 21:42:19.000000000 -0400
-+++ linux-2.4.31/Documentation/Configure.help	2005-09-10 18:50:14.340000000 -0400
-@@ -2197,6 +2197,12 @@
-   MIPS-32-based Baget embedded system.  This chipset is better known
-   via the NE2100 cards.
- 
-+jp-embedded Q5 support
-+CONFIG_MIPS_Q5
-+  This enables support for jp-embedded's MIPS based boards. The
-+  boards uses the AU1500 cpu. For more information about these
-+  boards, see <http://www.jp-embedded.com/>.
-+
- Support for DECstations
- CONFIG_DECSTATION
-   This enables support for DEC's MIPS based workstations.  For details
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 b/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847
deleted file mode 100644
index 9d0d80d96..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847
+++ /dev/null
@@ -1,162 +0,0 @@
-diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c
---- linux-2.4.31.org/drivers/net/au1000_eth.c	2005-01-19 09:09:56.000000000 -0500
-+++ linux-2.4.31/drivers/net/au1000_eth.c	2005-08-22 12:24:31.000000000 -0400
-@@ -595,6 +595,97 @@
- 	return 0;
- }
- 
-+int ns_83847_reset(struct net_device *dev, int phy_addr)
-+ {
-+       s16 mii_control, timeout;
-+
-+ //    printk("ns_reset\n");
-+       mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+       mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
-+       mdelay(1);
-+       for (timeout = 100; timeout > 0; --timeout) {
-+               mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+               if ((mii_control & MII_CNTL_RESET) == 0)
-+                       break;
-+               mdelay(1);
-+       }
-+       if (mii_control & MII_CNTL_RESET) {
-+               printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
-+               return -1;
-+       }
-+       return 0;
-+ }
-+
-+int ns_83847_init(struct net_device *dev, int phy_addr)
-+ {
-+      s16 data;
-+ //    printk("ns_init\n");
-+
-+       /* Stop auto-negotiation */
-+ //    data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ //    mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
-+ //    mdio_write(dev, phy_addr,    0, 0x0000);
-+       mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
-+
-+       /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
-+       data = mdio_read(dev, phy_addr, MII_ANADV);
-+       /* obs PAUSE bit */
-+       data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
-+       mdio_write(dev, phy_addr, MII_ANADV, data);
-+
-+       /* Bypass led stretching? */
-+       data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
-+       data |= MII_NS_PHYCTRL_BP_STRETCH;
-+       mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
-+
-+       /* Restart auto-negotiation */
-+       data = mdio_read(dev, phy_addr, MII_CONTROL);
-+       data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
-+       mdio_write(dev, phy_addr, MII_CONTROL, data);
-+
-+       return 0;
-+ }
-+
-+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
-+ {
-+       u16 mii_data;
-+       struct au1000_private *aup;
-+
-+       if (!dev) {
-+               printk(KERN_ERR "ns_83847_status error: NULL dev\n");
-+               return -1;
-+       }
-+       aup = (struct au1000_private *) dev->priv;
-+
-+       mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
-+ //    printk("ns_status: %04x\n", mii_data);
-+       if (mii_data & MII_STAT_LINK) {
-+               *link = 1;
-+               mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
-+               if (mii_data & MII_NS_PHYSTS_SPEED_10) {
-+                       *speed = IF_PORT_10BASET;
-+                       dev->if_port = IF_PORT_10BASET;
-+               }
-+               else  {
-+                       if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
-+                               *speed = IF_PORT_100BASEFX;
-+                               dev->if_port = IF_PORT_100BASEFX;
-+                       }
-+                       else {
-+                               *speed = IF_PORT_100BASETX;
-+                               dev->if_port = IF_PORT_100BASETX;
-+                       }
-+               }
-+
-+       }
-+       else {
-+               *link = 0;
-+               *speed = 0;
-+               dev->if_port = IF_PORT_UNKNOWN;
-+       }
-+       return 0;
-+ }
-+
- #ifdef CONFIG_MIPS_BOSPORUS
- int stub_init(struct net_device *dev, int phy_addr)
- {
-@@ -620,6 +711,12 @@
- }
- #endif
- 
-+struct phy_ops ns_83847_ops = {
-+       ns_83847_init,
-+       ns_83847_reset,
-+       ns_83847_status,
-+};
-+
- struct phy_ops bcm_5201_ops = {
- 	bcm_5201_init,
- 	bcm_5201_reset,
-@@ -679,6 +776,7 @@
- 	{"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
- 	{"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0},
- 	{"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0},
-+	{"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
- #ifdef CONFIG_MIPS_BOSPORUS
- 	{"Stub", 0x1234, 0x5678, &stub_ops },
- #endif
-@@ -872,6 +970,8 @@
- 			}
- 		}
- 	}
-+	printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
-+	return -1;
- found:
- 
- #ifdef CONFIG_MIPS_BOSPORUS
-diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h
---- linux-2.4.31.org/drivers/net/au1000_eth.h	2004-02-18 08:36:31.000000000 -0500
-+++ linux-2.4.31/drivers/net/au1000_eth.h	2005-08-22 12:31:37.000000000 -0400
-@@ -86,6 +86,27 @@
- #define MII_STAT_CAN_TX_FDX 0x4000
- #define	MII_STAT_CAN_T4     0x8000
- 
-+/* mii registers for NS 83847 */
-+#define MII_NS_PHYSTS   0x10
-+#define MII_NS_FCSCR    0x14
-+#define MII_NS_RECR     0x15
-+#define MII_NS_PCSR     0x16
-+#define MII_NS_PHYCTRL  0x19
-+#define MII_NS_10BTSCR  0x1a
-+#define MII_NS_CDCTRL   0x1b
-+
-+/* MII_NS_PHYSTS bits */
-+#define MII_NS_PHYSTS_LINK            (1)
-+#define MII_NS_PHYSTS_SPEED_10        (1<<1)
-+#define MII_NS_PHYSTS_DUPLEX_FULL     (1<<2)
-+
-+/* MII_NS_PHYCTRL bits */
-+#define MII_NS_PHYCTRL_BP_STRETCH     (1<<8)
-+
-+/* MII_NS_CDCTRL bits */
-+#define MII_NS_CDCTRL_CD_ENABLE       (1<<15)
-+#define MII_NS_CDCTRL_RISETIME        (1<<11)
-+#define MII_NS_CDCTRL_FALLTIME        (1<<9)
- 
- #define		MII_ID1_OUI_LO		0xFC00	/* low bits of OUI mask */
- #define		MII_ID1_MODEL		0x03F0	/* model number */
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/006-cfi b/target/device/jp/q5/kernel-patches-2.4.32/006-cfi
deleted file mode 100644
index 5a28bd93f..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/006-cfi
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -Naur linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c	2004-11-17 06:54:21.000000000 -0500
-+++ linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c	2005-08-22 12:14:17.000000000 -0400
-@@ -510,7 +510,7 @@
- 	   or tells us why it failed. */        
- 	dq6 = CMD(1<<6);
- 	dq5 = CMD(1<<5);
--	timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+	timeo = jiffies + (HZ); /* setting timeout to 1s for now */
- 		
- 	oldstatus = cfi_read(map, adr);
- 	status = cfi_read(map, adr);
-@@ -950,12 +950,8 @@
- 		    oldstatus   = cfi_read( map, adr );
- 		    status      = cfi_read( map, adr );
- 		    
--		    if( ( oldstatus & 0x00FF ) == ( status & 0x00FF ) )
-+		    if( ( oldstatus & 0x00FF ) != ( status & 0x00FF ) )
- 		    {
--                printk( "Warning: DQ5 raised while erase operation was in progress, but erase completed OK\n" ); 		    
--		    } 			
--			else
--            {
- 			    /* DQ5 is active so we can do a reset and stop the erase */
- 				cfi_write(map, CMD(0xF0), chip->start);
-                 printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" );
-
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 b/target/device/jp/q5/kernel-patches-2.4.32/007-au1000
deleted file mode 100644
index d852ac9f6..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/007-au1000
+++ /dev/null
@@ -1,13 +0,0 @@
---- linux-2.4.32_old/arch/mips/au1000/common/clocks.c	2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32/arch/mips/au1000/common/clocks.c	2006-01-27 13:51:39.000000000 +0100
-@@ -85,9 +85,7 @@
- 		lcd_clock = sys_busclk / 4;
- 
- 	if (lcd_clock > 50000) /* Epson MAX */
--			printk(__FUNCTION__
--			       ": warning: LCD clock too high (%d KHz)\n",
--			       lcd_clock);
-+			printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
- }
- 
- unsigned int get_au1x00_lcd_clock(void)
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush b/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush
deleted file mode 100644
index 996b4c666..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush
+++ /dev/null
@@ -1,14 +0,0 @@
---- linux-2.4.32_old/include/asm-mips/wbflush.h	2006-01-26 15:16:14.000000000 +0100
-+++ linux-2.4.32/include/asm-mips/wbflush.h	2006-01-27 15:25:54.030500656 +0100
-@@ -15,9 +15,8 @@
- 
- #ifdef CONFIG_CPU_HAS_WB
- 
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
--
-+#define __wbflush() { __asm__ volatile ("sync"); }
-+ 
- #define wbflush()			\
- 	do {				\
- 		__sync();		\
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/100-version b/target/device/jp/q5/kernel-patches-2.4.32/100-version
deleted file mode 100644
index c20e6a82d..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/100-version
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux/Makefile.orig	2004-08-18 14:17:14.000000000 -0600
-+++ linux/Makefile	2004-08-18 14:17:54.000000000 -0600
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 4
- SUBLEVEL = 32
--EXTRAVERSION =
-+EXTRAVERSION =-q5
- 
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- 
diff --git a/target/device/jp/q5/linux.config b/target/device/jp/q5/linux.config
deleted file mode 100644
index 6a1016ef5..000000000
--- a/target/device/jp/q5/linux.config
+++ /dev/null
@@ -1,886 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MIPS=y
-CONFIG_MIPS32=y
-# CONFIG_MIPS64 is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Machine selection
-#
-# CONFIG_ACER_PICA_61 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
-# CONFIG_MIPS_PB1550 is not set
-CONFIG_MIPS_Q5=y
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_COGENT_CSB250 is not set
-# CONFIG_BAGET_MIPS is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_HP_LASERJET is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_BIG_SUR is not set
-# CONFIG_PMC_STRETCH is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_NEC_EAGLE is not set
-# CONFIG_OLIVETTI_M700 is not set
-# CONFIG_NINO is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_SOC_AU1X00=y
-CONFIG_SOC_AU1500=y
-CONFIG_NONCOHERENT_IO=y
-CONFIG_PC_KEYB=y
-# CONFIG_MIPS_AU1000 is not set
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_VTAG_ICACHE is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_ADVANCED=y
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_LLDSCD is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_CPU_HAS_SYNC=y
-
-#
-# General setup
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_NEW=y
-CONFIG_PCI_AUTO=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_ISA is not set
-# CONFIG_TC is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_MIPS32_COMPAT is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_BINFMT_ELF32 is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CONCAT=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_B1 is not set
-CONFIG_MTD_CFI_B2=y
-CONFIG_MTD_CFI_B4=y
-# CONFIG_MTD_CFI_B8 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x18000000
-CONFIG_MTD_PHYSMAP_LEN=0x2000000
-CONFIG_MTD_PHYSMAP_BUSWIDTH=4
-# CONFIG_MTD_PB1000 is not set
-# CONFIG_MTD_PB1500 is not set
-# CONFIG_MTD_PB1100 is not set
-# CONFIG_MTD_CSTM_MIPS_IXX is not set
-# CONFIG_MTD_OCELOT is not set
-# CONFIG_MTD_LASAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
-# CONFIG_IP_ROUTE_NAT is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_TOS is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-#   IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_IRC is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_TCPMSS=m
-# CONFIG_IP_NF_MATCH_HELPER is not set
-CONFIG_IP_NF_MATCH_STATE=m
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-# CONFIG_IP_NF_MATCH_OWNER is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_MIRROR is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-#   IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-
-#
-#    SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=m
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_CSZ is not set
-# CONFIG_NET_SCH_HFSC is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_BCM5222_DUAL_PHY is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_LAN_SAA9730 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_STRIP=m
-CONFIG_WAVELAN=m
-CONFIG_ARLAN=m
-CONFIG_AIRONET4500=m
-CONFIG_AIRONET4500_NONCS=m
-CONFIG_AIRONET4500_PNP=y
-CONFIG_AIRONET4500_PCI=y
-# CONFIG_AIRONET4500_ISA is not set
-# CONFIG_AIRONET4500_I365 is not set
-CONFIG_AIRONET4500_PROC=m
-CONFIG_AIRO=m
-# CONFIG_HERMES is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-CONFIG_PRISM54=m
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_SERIAL_TX3912 is not set
-# CONFIG_SERIAL_TX3912_CONSOLE is not set
-# CONFIG_SERIAL_TXX9 is not set
-# CONFIG_SERIAL_TXX9_CONSOLE is not set
-CONFIG_AU1X00_UART=y
-CONFIG_AU1X00_SERIAL_CONSOLE=y
-# CONFIG_AU1X00_USB_TTY is not set
-# CONFIG_AU1X00_USB_RAW is not set
-# CONFIG_TXX927_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Console drivers
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-CONFIG_CROSSCOMPILE=y
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_KGDB is not set
-# CONFIG_GDB_CONSOLE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_MIPS_UNCACHED is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_FW_LOADER=y
diff --git a/target/device/jp/q5/linux.mk b/target/device/jp/q5/linux.mk
deleted file mode 100644
index b246143f0..000000000
--- a/target/device/jp/q5/linux.mk
+++ /dev/null
@@ -1,129 +0,0 @@
-#############################################################
-#
-# Linux kernel targets
-#
-# Note: If you have any patches to apply, create the directory
-# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them... i.e.
-#
-# sources/kernel-patches/001-my-special-stuff.bz2
-# sources/kernel-patches/003-gcc-Os.bz2
-# sources/kernel-patches/004_no-warnings.bz2
-# sources/kernel-patches/030-lowlatency-mini.bz2
-# sources/kernel-patches/031-lowlatency-fixes-5.bz2
-# sources/kernel-patches/099-shutup.bz2
-# etc...
-#
-# these patches will all be applied by the patch-kernel.sh
-# script (which will also abort the build if it finds rejects)
-# -Erik
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux),)
-
-# Base version of Linux kernel that we need to download
-DOWNLOAD_LINUX_VERSION=2.4.32
-# Version of Linux kernel AFTER applying all patches
-LINUX_VERSION=$(DOWNLOAD_LINUX_VERSION)-q5
-
-
-# File name for the Linux kernel binary
-LINUX_KERNEL=linux-kernel-$(LINUX_VERSION)-$(ARCH).srec
-
-
-# Linux kernel configuration file
-LINUX_KCONFIG=$(BOARD_PATH)/linux.config
-
-# kernel patches
-LINUX_PATCH_DIR=target/device/jp/q5/kernel-patches-$(DOWNLOAD_LINUX_VERSION)/
-
-
-
-
-LINUX_FORMAT=vmlinux
-LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
-	-e 's/mipsel/mips/' \
-	-e 's/powerpc/ppc/' \
-	-e 's/sh[234]/sh/' \
-	)
-LINUX_BINLOC=$(LINUX_FORMAT)
-LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_SOURCE=linux-$(DOWNLOAD_LINUX_VERSION).tar.bz2
-LINUX_CAT:=$(BZCAT)
-LINUX_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.4
-# Used by pcmcia-cs and others
-LINUX_SOURCE_DIR=$(LINUX_DIR)
-
-$(DL_DIR)/$(LINUX_SOURCE):
-	mkdir -p $(DL_DIR)
-	$(call DOWNLOAD,$(LINUX_SITE),$(LINUX_SOURCE))
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
-	mkdir -p $(TOOL_BUILD_DIR)
-	-(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX_DIR) linux)
-	$(LINUX_CAT) $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION))
-	# Rename the dir from the downloaded version to the AFTER patch version
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION)
-endif
-	toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR)
-	#New versions of binutils does not have -mcpu, but -mtune. -march is not needed because -mips2 is used
-	mv $(LINUX_DIR)/arch/mips/Makefile $(LINUX_DIR)/arch/mips/Makefile.org && sed 's/-mcpu/-mtune/g' < $(LINUX_DIR)/arch/mips/Makefile.org > $(LINUX_DIR)/arch/mips/Makefile
-	touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_KCONFIG):
-	@if [ ! -f "$(LINUX_KCONFIG)" ]; then \
-		echo ""; \
-		echo "You should create a .config for your kernel"; \
-		echo "and install it as $(LINUX_KCONFIG)"; \
-		echo ""; \
-		sleep 5; \
-	fi
-
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
-	$(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile
-	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
-	-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
-ifeq ($(BR2_mips),y)
-	$(SED) "s,CONFIG_CPU_LITTLE_ENDIAN=y,# CONFIG_CPU_LITTLE_ENDIAN is not set\n# CONFIG_BINFMT_IRIX is not set," $(LINUX_DIR)/.config
-endif
-	$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h
-	touch $(LINUX_DIR)/.configured
-
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
-	$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep
-	touch $(LINUX_DIR)/.depend_done
-
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
-	$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) $(LINUX_FORMAT)
-	$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) modules
-
-$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC)
-	$(KERNEL_CROSS)objcopy -O srec $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL)
-	touch -c $(LINUX_KERNEL)
-
-$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep: $(LINUX_KERNEL) cross-depmod
-	rm -rf $(TARGET_DIR)/lib/modules
-	rm -f $(TARGET_DIR)/sbin/cardmgr
-	$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) \
-		DEPMOD=$(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-depmod \
-		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
-
-$(STAGING_DIR)/usr/include/linux/version.h: $(LINUX_DIR)/.configured
-	mkdir -p $(STAGING_DIR)/usr/include
-	tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/usr/include/
-	tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/usr/include/
-
-linux: $(STAGING_DIR)/usr/include/linux/version.h $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep
-
-linux-source: $(DL_DIR)/$(LINUX_SOURCE)
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linuxclean: clean
-	rm -f $(LINUX_KERNEL)
-	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) clean
-
-linux-dirclean:
-	rm -rf $(LINUX_DIR)
-
-endif
diff --git a/target/device/jp/q5/target_skeleton/bin/.empty b/target/device/jp/q5/target_skeleton/bin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/bin/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/dev/log b/target/device/jp/q5/target_skeleton/dev/log
deleted file mode 120000
index d96b3b1cb..000000000
--- a/target/device/jp/q5/target_skeleton/dev/log
+++ /dev/null
@@ -1 +0,0 @@
-../tmp/log
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/dev/pts/.empty b/target/device/jp/q5/target_skeleton/dev/pts/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/dev/pts/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/etc/TZ b/target/device/jp/q5/target_skeleton/etc/TZ
deleted file mode 100644
index 9fcb2a3c5..000000000
--- a/target/device/jp/q5/target_skeleton/etc/TZ
+++ /dev/null
@@ -1 +0,0 @@
-MST7MDT
diff --git a/target/device/jp/q5/target_skeleton/etc/fstab b/target/device/jp/q5/target_skeleton/etc/fstab
deleted file mode 100644
index 6d33629a7..000000000
--- a/target/device/jp/q5/target_skeleton/etc/fstab
+++ /dev/null
@@ -1,8 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt>     <type>	<options>         <dump> <pass>
-/dev/root       /              ext2	rw,noauto         0      1
-proc		/proc	       proc     defaults	  0	 0
-devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
-tmpfs           /tmp           tmpfs    defaults          0      0
-
diff --git a/target/device/jp/q5/target_skeleton/etc/group b/target/device/jp/q5/target_skeleton/etc/group
deleted file mode 100644
index a21ef0f76..000000000
--- a/target/device/jp/q5/target_skeleton/etc/group
+++ /dev/null
@@ -1,10 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-utmp:x:43:
-staff:x:50:
-default:x:1000:
diff --git a/target/device/jp/q5/target_skeleton/etc/hostname b/target/device/jp/q5/target_skeleton/etc/hostname
deleted file mode 100644
index 52e67d68a..000000000
--- a/target/device/jp/q5/target_skeleton/etc/hostname
+++ /dev/null
@@ -1 +0,0 @@
-uclibc
diff --git a/target/device/jp/q5/target_skeleton/etc/hosts b/target/device/jp/q5/target_skeleton/etc/hosts
deleted file mode 100644
index ba712fe03..000000000
--- a/target/device/jp/q5/target_skeleton/etc/hosts
+++ /dev/null
@@ -1 +0,0 @@
-127.0.0.1	localhost
diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom b/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom
deleted file mode 100755
index f73cea59e..000000000
--- a/target/device/jp/q5/target_skeleton/etc/init.d/S20urandom
+++ /dev/null
@@ -1,54 +0,0 @@
-#! /bin/sh
-#
-# urandom	This script saves the random seed between reboots.
-#		It is called from the boot, halt and reboot scripts.
-#
-# Version:	@(#)urandom  1.33  22-Jun-1998  miquels@cistron.nl
-#
-
-[ -c /dev/urandom ] || exit 0
-#. /etc/default/rcS
-
-case "$1" in
-	start|"")
-		if [ "$VERBOSE" != no ]
-		then
-			echo -n "Initializing random number generator... "
-		fi
-		# Load and then save 512 bytes,
-		# which is the size of the entropy pool
-		if [ -f /etc/random-seed ]
-		then
-			cat /etc/random-seed >/dev/urandom
-		fi
-		# check for read only file system
-		if ! touch /etc/random-seed 2>/dev/null
-		then
-			echo "read-only file system detected...done"
-			exit
-		fi
-		rm -f /etc/random-seed
-		umask 077
-		dd if=/dev/urandom of=/etc/random-seed count=1 \
-			>/dev/null 2>&1 || echo "urandom start: failed."
-		umask 022
-		[ "$VERBOSE" != no ] && echo "done."
-		;;
-	stop)
-		if ! touch /etc/random-seed 2>/dev/null
-                then
-                        exit
-                fi
-		# Carry a random seed from shut-down to start-up;
-		# see documentation in linux/drivers/char/random.c
-		[ "$VERBOSE" != no ] && echo -n "Saving random seed... "
-		umask 077
-		dd if=/dev/urandom of=/etc/random-seed count=1 \
-			>/dev/null 2>&1 || echo "urandom stop: failed."
-		[ "$VERBOSE" != no ] && echo "done."
-		;;
-	*)
-		echo "Usage: urandom {start|stop}" >&2
-		exit 1
-		;;
-esac
diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/S40network b/target/device/jp/q5/target_skeleton/etc/init.d/S40network
deleted file mode 100755
index d835d9c72..000000000
--- a/target/device/jp/q5/target_skeleton/etc/init.d/S40network
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-start() {
- 	echo "Starting network..."
-	/sbin/ifup -a
-}	
-stop() {
-	echo -n "Stopping network..."
-	/sbin/ifdown -a
-}
-restart() {
-	stop
-	start
-}	
-
-case "$1" in
-  start)
-  	start
-	;;
-  stop)
-  	stop
-	;;
-  restart|reload)
-  	restart
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart}"
-	exit 1
-esac
-
-exit $?
-
diff --git a/target/device/jp/q5/target_skeleton/etc/init.d/rcS b/target/device/jp/q5/target_skeleton/etc/init.d/rcS
deleted file mode 100755
index de411534d..000000000
--- a/target/device/jp/q5/target_skeleton/etc/init.d/rcS
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
-     # Ignore dangling symlinks (if any).
-     [ ! -f "$i" ] && continue
-
-     case "$i" in
-	*.sh)
-	    # Source shell script for speed.
-	    (
-		trap - INT QUIT TSTP
-		set start
-		. $i
-	    )
-	    ;;
-	*)
-	    # No sh extension, so fork subprocess.
-	    $i start
-	    ;;
-    esac
-done
-
diff --git a/target/device/jp/q5/target_skeleton/etc/inittab b/target/device/jp/q5/target_skeleton/etc/inittab
deleted file mode 100644
index 8c809af68..000000000
--- a/target/device/jp/q5/target_skeleton/etc/inittab
+++ /dev/null
@@ -1,47 +0,0 @@
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels.  The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id        == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action    == one of sysinit, respawn, askfirst, wait, and once
-# process   == program to run
-
-# Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
-null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Set up a couple of getty's
-#tty1::respawn:/sbin/getty 38400 tty1
-#tty2::respawn:/sbin/getty 38400 tty2
-
-# Put a getty on the serial port
-ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Logging junk
-null::sysinit:/bin/touch /var/log/messages
-null::respawn:/sbin/syslogd -n -m 0
-null::respawn:/sbin/klogd -n
-#tty3::respawn:/usr/bin/tail -f /var/log/messages
-
-# Stuff to do for the 3-finger salute
-::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-null::shutdown:/usr/bin/killall klogd
-null::shutdown:/usr/bin/killall syslogd
-null::shutdown:/bin/umount -a -r
-null::shutdown:/sbin/swapoff -a
-
diff --git a/target/device/jp/q5/target_skeleton/etc/inputrc b/target/device/jp/q5/target_skeleton/etc/inputrc
deleted file mode 100644
index 2f1cb601a..000000000
--- a/target/device/jp/q5/target_skeleton/etc/inputrc
+++ /dev/null
@@ -1,44 +0,0 @@
-# /etc/inputrc - global inputrc for libreadline
-# See readline(3readline) and `info readline' for more information.
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-set bell-style visible
-
-# To allow the use of 8bit-characters like the german umlauts, comment out
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-"\e0d": backward-word
-"\e0c": forward-word
-"\e[h": beginning-of-line
-"\e[f": end-of-line
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# Common standard keypad and cursor
-# (codes courtsey Werner Fink, <werner@suse.de>)
-#"\e[1~": history-search-backward
-"\e[2~": yank
-"\e[3~": delete-char
-#"\e[4~": set-mark
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-# Normal keypad and cursor of xterm
-"\e[F": end-of-line
-"\e[H": beginning-of-line
-# Application keypad and cursor of xterm
-"\eOA": previous-history
-"\eOC": forward-char
-"\eOB": next-history
-"\eOD": backward-char
-"\eOF": end-of-line
-"\eOH": beginning-of-line
-
diff --git a/target/device/jp/q5/target_skeleton/etc/issue b/target/device/jp/q5/target_skeleton/etc/issue
deleted file mode 100644
index f24b862c9..000000000
--- a/target/device/jp/q5/target_skeleton/etc/issue
+++ /dev/null
@@ -1,4 +0,0 @@
-
-
-Welcome to the Erik's uClibc development environment.
-
diff --git a/target/device/jp/q5/target_skeleton/etc/mtab b/target/device/jp/q5/target_skeleton/etc/mtab
deleted file mode 120000
index e1c204547..000000000
--- a/target/device/jp/q5/target_skeleton/etc/mtab
+++ /dev/null
@@ -1 +0,0 @@
-../proc/mounts
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/etc/network/interfaces b/target/device/jp/q5/target_skeleton/etc/network/interfaces
deleted file mode 100644
index 218b82cde..000000000
--- a/target/device/jp/q5/target_skeleton/etc/network/interfaces
+++ /dev/null
@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
diff --git a/target/device/jp/q5/target_skeleton/etc/passwd b/target/device/jp/q5/target_skeleton/etc/passwd
deleted file mode 100644
index e0f473fc7..000000000
--- a/target/device/jp/q5/target_skeleton/etc/passwd
+++ /dev/null
@@ -1,13 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
diff --git a/target/device/jp/q5/target_skeleton/etc/profile b/target/device/jp/q5/target_skeleton/etc/profile
deleted file mode 100644
index 6aa4259fd..000000000
--- a/target/device/jp/q5/target_skeleton/etc/profile
+++ /dev/null
@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
-    if [ "$BASH" ]; then
-	export PS1="[\u@\h \W]\\$ "
-	alias ll='/bin/ls -laFh'
-	alias ls='/bin/ls -F'
-	export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-    else
-      if [ "`id -u`" -eq 0 ]; then 
-	export PS1='# '
-      else
-	export PS1='$ '
-      fi
-    fi
-
-    export USER=`id -un`
-    export LOGNAME=$USER
-    export HOSTNAME=`/bin/hostname`
-    export HISTSIZE=1000
-    export HISTFILESIZE=1000
-    export PAGER='/bin/more '
-    export EDITOR='/bin/vi'
-    export INPUTRC=/etc/inputrc
-    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-
-    ### Some aliases
-    alias ps2='ps facux '
-    alias ps1='ps faxo "%U %t %p %a" '
-    alias af='ps af'
-    alias cls='clear'
-    alias df='df -h'
-    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
-    #alias bc='bc -l'
-    alias minicom='minicom -c on'
-    alias calc='calc -Cd '
-    alias bc='calc -Cd '
-fi;
diff --git a/target/device/jp/q5/target_skeleton/etc/protocols b/target/device/jp/q5/target_skeleton/etc/protocols
deleted file mode 100644
index 1ac8a4096..000000000
--- a/target/device/jp/q5/target_skeleton/etc/protocols
+++ /dev/null
@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip	0	IP		# internet protocol, pseudo protocol number
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-egp	8	EGP		# exterior gateway protocol
-pup	12	PUP		# PARC universal packet protocol
-udp	17	UDP		# user datagram protocol
-hmp	20	HMP		# host monitoring protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-rdp	27	RDP		# "reliable datagram" protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
-rspf	73	RSPF		#Radio Shortest Path First.
-vmtp	81	VMTP		# Versatile Message Transport
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-ipip	94	IPIP		# Yet Another IP encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation
diff --git a/target/device/jp/q5/target_skeleton/etc/resolv.conf b/target/device/jp/q5/target_skeleton/etc/resolv.conf
deleted file mode 120000
index 71f6f9657..000000000
--- a/target/device/jp/q5/target_skeleton/etc/resolv.conf
+++ /dev/null
@@ -1 +0,0 @@
-../tmp/resolv.conf
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/etc/securetty b/target/device/jp/q5/target_skeleton/etc/securetty
deleted file mode 100644
index 81616f38e..000000000
--- a/target/device/jp/q5/target_skeleton/etc/securetty
+++ /dev/null
@@ -1,12 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3
diff --git a/target/device/jp/q5/target_skeleton/etc/services b/target/device/jp/q5/target_skeleton/etc/services
deleted file mode 100644
index b287b63ea..000000000
--- a/target/device/jp/q5/target_skeleton/etc/services
+++ /dev/null
@@ -1,302 +0,0 @@
-# /etc/services:
-# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994).  Not all ports
-# are included, only the more common ones.
-
-tcpmux		1/tcp				# TCP port service multiplexer
-echo		7/tcp
-echo		7/udp
-discard		9/tcp		sink null
-discard		9/udp		sink null
-systat		11/tcp		users
-daytime		13/tcp
-daytime		13/udp
-netstat		15/tcp
-qotd		17/tcp		quote
-msp		18/tcp				# message send protocol
-msp		18/udp				# message send protocol
-chargen		19/tcp		ttytst source
-chargen		19/udp		ttytst source
-ftp-data	20/tcp
-ftp		21/tcp
-fsp		21/udp		fspd
-ssh		22/tcp				# SSH Remote Login Protocol
-ssh		22/udp				# SSH Remote Login Protocol
-telnet		23/tcp
-# 24 - private
-smtp		25/tcp		mail
-# 26 - unassigned
-time		37/tcp		timserver
-time		37/udp		timserver
-rlp		39/udp		resource	# resource location
-nameserver	42/tcp		name		# IEN 116
-whois		43/tcp		nicname
-re-mail-ck	50/tcp				# Remote Mail Checking Protocol
-re-mail-ck	50/udp				# Remote Mail Checking Protocol
-domain		53/tcp		nameserver	# name-domain server
-domain		53/udp		nameserver
-mtp		57/tcp				# deprecated
-bootps		67/tcp				# BOOTP server
-bootps		67/udp
-bootpc		68/tcp				# BOOTP client
-bootpc		68/udp
-tftp		69/udp
-gopher		70/tcp				# Internet Gopher
-gopher		70/udp
-rje		77/tcp		netrjs
-finger		79/tcp
-www		80/tcp		http		# WorldWideWeb HTTP
-www		80/udp				# HyperText Transfer Protocol
-link		87/tcp		ttylink
-kerberos	88/tcp		kerberos5 krb5	# Kerberos v5
-kerberos	88/udp		kerberos5 krb5	# Kerberos v5
-supdup		95/tcp
-# 100 - reserved
-hostnames	101/tcp		hostname	# usually from sri-nic
-iso-tsap	102/tcp		tsap		# part of ISODE.
-csnet-ns	105/tcp		cso-ns		# also used by CSO name server
-csnet-ns	105/udp		cso-ns
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux	106/tcp		poppassd
-#3com-tsmux	106/udp		poppassd
-rtelnet		107/tcp				# Remote Telnet
-rtelnet		107/udp
-pop-2		109/tcp		postoffice	# POP version 2
-pop-2		109/udp
-pop-3		110/tcp				# POP version 3
-pop-3		110/udp
-sunrpc		111/tcp		portmapper	# RPC 4.0 portmapper TCP
-sunrpc		111/udp		portmapper	# RPC 4.0 portmapper UDP
-auth		113/tcp		authentication tap ident
-sftp		115/tcp
-uucp-path	117/tcp
-nntp		119/tcp		readnews untp	# USENET News Transfer Protocol
-ntp		123/tcp
-ntp		123/udp				# Network Time Protocol
-netbios-ns	137/tcp				# NETBIOS Name Service
-netbios-ns	137/udp
-netbios-dgm	138/tcp				# NETBIOS Datagram Service
-netbios-dgm	138/udp
-netbios-ssn	139/tcp				# NETBIOS session service
-netbios-ssn	139/udp
-imap2		143/tcp				# Interim Mail Access Proto v2
-imap2		143/udp
-snmp		161/udp				# Simple Net Mgmt Proto
-snmp-trap	162/udp		snmptrap	# Traps for SNMP
-cmip-man	163/tcp				# ISO mgmt over IP (CMOT)
-cmip-man	163/udp
-cmip-agent	164/tcp
-cmip-agent	164/udp
-xdmcp		177/tcp				# X Display Mgr. Control Proto
-xdmcp		177/udp
-nextstep	178/tcp		NeXTStep NextStep	# NeXTStep window
-nextstep	178/udp		NeXTStep NextStep	# server
-bgp		179/tcp				# Border Gateway Proto.
-bgp		179/udp
-prospero	191/tcp				# Cliff Neuman's Prospero
-prospero	191/udp
-irc		194/tcp				# Internet Relay Chat
-irc		194/udp
-smux		199/tcp				# SNMP Unix Multiplexer
-smux		199/udp
-at-rtmp		201/tcp				# AppleTalk routing
-at-rtmp		201/udp
-at-nbp		202/tcp				# AppleTalk name binding
-at-nbp		202/udp
-at-echo		204/tcp				# AppleTalk echo
-at-echo		204/udp
-at-zis		206/tcp				# AppleTalk zone information
-at-zis		206/udp
-qmtp		209/tcp				# The Quick Mail Transfer Protocol
-qmtp		209/udp				# The Quick Mail Transfer Protocol
-z3950		210/tcp		wais		# NISO Z39.50 database
-z3950		210/udp		wais
-ipx		213/tcp				# IPX
-ipx		213/udp
-imap3		220/tcp				# Interactive Mail Access
-imap3		220/udp				# Protocol v3
-ulistserv	372/tcp				# UNIX Listserv
-ulistserv	372/udp
-https		443/tcp				# MCom
-https		443/udp				# MCom
-snpp		444/tcp				# Simple Network Paging Protocol
-snpp		444/udp				# Simple Network Paging Protocol
-saft		487/tcp				# Simple Asynchronous File Transfer
-saft		487/udp				# Simple Asynchronous File Transfer
-npmp-local	610/tcp		dqs313_qmaster	# npmp-local / DQS
-npmp-local	610/udp		dqs313_qmaster	# npmp-local / DQS
-npmp-gui	611/tcp		dqs313_execd	# npmp-gui / DQS
-npmp-gui	611/udp		dqs313_execd	# npmp-gui / DQS
-hmmp-ind	612/tcp		dqs313_intercell# HMMP Indication / DQS
-hmmp-ind	612/udp		dqs313_intercell# HMMP Indication / DQS
-#
-# UNIX specific services
-#
-exec		512/tcp
-biff		512/udp		comsat
-login		513/tcp
-who		513/udp		whod
-shell		514/tcp		cmd		# no passwords used
-syslog		514/udp
-printer		515/tcp		spooler		# line printer spooler
-talk		517/udp
-ntalk		518/udp
-route		520/udp		router routed	# RIP
-timed		525/udp		timeserver
-tempo		526/tcp		newdate
-courier		530/tcp		rpc
-conference	531/tcp		chat
-netnews		532/tcp		readnews
-netwall		533/udp				# -for emergency broadcasts
-uucp		540/tcp		uucpd		# uucp daemon
-afpovertcp	548/tcp				# AFP over TCP
-afpovertcp	548/udp				# AFP over TCP
-remotefs	556/tcp		rfs_server rfs	# Brunhoff remote filesystem
-klogin		543/tcp				# Kerberized `rlogin' (v5)
-kshell		544/tcp		krcmd		# Kerberized `rsh' (v5)
-kerberos-adm	749/tcp				# Kerberos `kadmin' (v5)
-#
-webster		765/tcp				# Network dictionary
-webster		765/udp
-#
-# From ``Assigned Numbers'':
-#
-#> The Registered Ports are not controlled by the IANA and on most systems
-#> can be used by ordinary user processes or programs executed by ordinary
-#> users.
-#
-#> Ports are used in the TCP [45,106] to name the ends of logical
-#> connections which carry long term conversations.  For the purpose of
-#> providing services to unknown callers, a service contact port is
-#> defined.  This list specifies the port used by the server process as its
-#> contact port.  While the IANA can not control uses of these ports it
-#> does register or list uses of these ports as a convienence to the
-#> community.
-#
-nfsdstatus	1110/tcp
-nfsd-keepalive	1110/udp
-
-ingreslock	1524/tcp
-ingreslock	1524/udp
-prospero-np	1525/tcp			# Prospero non-privileged
-prospero-np	1525/udp
-datametrics	1645/tcp	old-radius	# datametrics / old radius entry
-datametrics	1645/udp	old-radius	# datametrics / old radius entry
-sa-msg-port	1646/tcp	old-radacct	# sa-msg-port / old radacct entry
-sa-msg-port	1646/udp	old-radacct	# sa-msg-port / old radacct entry
-radius		1812/tcp			# Radius
-radius		1812/udp			# Radius
-radacct		1813/tcp			# Radius Accounting
-radacct		1813/udp			# Radius Accounting
-nfsd		2049/tcp	nfs
-nfsd		2049/udp	nfs
-cvspserver	2401/tcp			# CVS client/server operations
-cvspserver	2401/udp			# CVS client/server operations
-mysql		3306/tcp			# MySQL
-mysql		3306/udp			# MySQL
-rfe		5002/tcp			# Radio Free Ethernet
-rfe		5002/udp			# Actually uses UDP only
-cfengine	5308/tcp			# CFengine
-cfengine	5308/udp			# CFengine
-bbs		7000/tcp			# BBS service
-#
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial.  Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos4	750/udp		kerberos-iv kdc	# Kerberos (server) udp
-kerberos4	750/tcp		kerberos-iv kdc	# Kerberos (server) tcp
-kerberos_master	751/udp				# Kerberos authentication
-kerberos_master	751/tcp				# Kerberos authentication
-passwd_server	752/udp				# Kerberos passwd server
-krb_prop	754/tcp				# Kerberos slave propagation
-krbupdate	760/tcp		kreg		# Kerberos registration
-kpasswd		761/tcp		kpwd		# Kerberos "passwd"
-kpop		1109/tcp			# Pop with Kerberos
-knetd		2053/tcp			# Kerberos de-multiplexor
-zephyr-srv	2102/udp			# Zephyr server
-zephyr-clt	2103/udp			# Zephyr serv-hm connection
-zephyr-hm	2104/udp			# Zephyr hostmanager
-eklogin		2105/tcp			# Kerberos encrypted rlogin
-#
-# Unofficial but necessary (for NetBSD) services
-#
-supfilesrv	871/tcp				# SUP server
-supfiledbg	1127/tcp			# SUP debugging
-#
-# Datagram Delivery Protocol services
-#
-rtmp		1/ddp				# Routing Table Maintenance Protocol
-nbp		2/ddp				# Name Binding Protocol
-echo		4/ddp				# AppleTalk Echo Protocol
-zip		6/ddp				# Zone Information Protocol
-#
-# Services added for the Debian GNU/Linux distribution
-poppassd	106/tcp				# Eudora
-poppassd	106/udp				# Eudora
-mailq		174/tcp				# Mailer transport queue for Zmailer
-mailq		174/tcp				# Mailer transport queue for Zmailer
-omirr		808/tcp		omirrd		# online mirror
-omirr		808/udp		omirrd		# online mirror
-rmtcfg		1236/tcp			# Gracilis Packeten remote config server
-xtel		1313/tcp			# french minitel
-coda_opcons	1355/udp			# Coda opcons            (Coda fs)
-coda_venus	1363/udp			# Coda venus             (Coda fs)
-coda_auth	1357/udp			# Coda auth              (Coda fs)
-coda_udpsrv	1359/udp			# Coda udpsrv            (Coda fs)
-coda_filesrv	1361/udp			# Coda filesrv           (Coda fs)
-codacon		1423/tcp	venus.cmu	# Coda Console           (Coda fs)
-coda_aux1	1431/tcp			# coda auxiliary service (Coda fs)
-coda_aux1	1431/udp			# coda auxiliary service (Coda fs)
-coda_aux2	1433/tcp			# coda auxiliary service (Coda fs)
-coda_aux2	1433/udp			# coda auxiliary service (Coda fs)
-coda_aux3	1435/tcp			# coda auxiliary service (Coda fs)
-coda_aux3	1435/udp			# coda auxiliary service (Coda fs)
-cfinger		2003/tcp			# GNU Finger
-afbackup	2988/tcp			# Afbackup system
-afbackup	2988/udp			# Afbackup system
-icp		3130/tcp			# Internet Cache Protocol (Squid)
-icp		3130/udp			# Internet Cache Protocol (Squid)
-postgres	5432/tcp			# POSTGRES
-postgres	5432/udp			# POSTGRES
-fax		4557/tcp			# FAX transmission service        (old)
-hylafax		4559/tcp			# HylaFAX client-server protocol  (new)
-noclog		5354/tcp			# noclogd with TCP (nocol)
-noclog		5354/udp			# noclogd with UDP (nocol)
-hostmon		5355/tcp			# hostmon uses TCP (nocol)
-hostmon		5355/udp			# hostmon uses TCP (nocol)
-ircd		6667/tcp			# Internet Relay Chat
-ircd		6667/udp			# Internet Relay Chat
-webcache	8080/tcp			# WWW caching service
-webcache	8080/udp			# WWW caching service
-tproxy		8081/tcp			# Transparent Proxy
-tproxy		8081/udp			# Transparent Proxy
-mandelspawn	9359/udp	mandelbrot	# network mandelbrot
-amanda		10080/udp			# amanda backup services
-amandaidx	10082/tcp			# amanda backup services
-amidxtape	10083/tcp			# amanda backup services
-isdnlog		20011/tcp			# isdn logging system
-isdnlog		20011/udp			# isdn logging system
-vboxd		20012/tcp			# voice box system
-vboxd		20012/udp			# voice box system
-binkp           24554/tcp			# Binkley
-binkp           24554/udp			# Binkley
-asp		27374/tcp			# Address Search Protocol
-asp		27374/udp			# Address Search Protocol
-tfido           60177/tcp			# Ifmail
-tfido           60177/udp			# Ifmail
-fido            60179/tcp			# Ifmail
-fido            60179/udp			# Ifmail
-
-# Local services
-
diff --git a/target/device/jp/q5/target_skeleton/etc/shadow b/target/device/jp/q5/target_skeleton/etc/shadow
deleted file mode 100644
index 4941a1ac5..000000000
--- a/target/device/jp/q5/target_skeleton/etc/shadow
+++ /dev/null
@@ -1,12 +0,0 @@
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::
diff --git a/target/device/jp/q5/target_skeleton/home/.empty b/target/device/jp/q5/target_skeleton/home/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/home/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/lib/.empty b/target/device/jp/q5/target_skeleton/lib/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/lib/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/mnt/.empty b/target/device/jp/q5/target_skeleton/mnt/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/mnt/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/opt/.empty b/target/device/jp/q5/target_skeleton/opt/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/opt/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/proc/.empty b/target/device/jp/q5/target_skeleton/proc/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/proc/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/root/.bash_history b/target/device/jp/q5/target_skeleton/root/.bash_history
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/root/.bash_history
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/root/.bash_logout b/target/device/jp/q5/target_skeleton/root/.bash_logout
deleted file mode 100644
index 77ef1f950..000000000
--- a/target/device/jp/q5/target_skeleton/root/.bash_logout
+++ /dev/null
@@ -1,7 +0,0 @@
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
-    /dev/tty[0-9]*) clear
-esac
diff --git a/target/device/jp/q5/target_skeleton/root/.bash_profile b/target/device/jp/q5/target_skeleton/root/.bash_profile
deleted file mode 100644
index 27bf14953..000000000
--- a/target/device/jp/q5/target_skeleton/root/.bash_profile
+++ /dev/null
@@ -1,15 +0,0 @@
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
-    source ~/.bashrc
-fi
diff --git a/target/device/jp/q5/target_skeleton/root/.bashrc b/target/device/jp/q5/target_skeleton/root/.bashrc
deleted file mode 100644
index c97c9c4dc..000000000
--- a/target/device/jp/q5/target_skeleton/root/.bashrc
+++ /dev/null
@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
-    if [ "$BASH" ]; then
-	export PS1="[\u@\h \W]\\$ "
-    else
-      if [ "`id -u`" -eq 0 ]; then 
-	export PS1='# '
-      else
-	export PS1='$ '
-      fi
-    fi
-
-    export USER=`id -un`
-    export LOGNAME=$USER
-    export HOSTNAME=`/bin/hostname`
-    export HISTSIZE=1000
-    export HISTFILESIZE=1000
-    export PAGER='/bin/more '
-    export EDITOR='/bin/vi'
-    export INPUTRC=/etc/inputrc
-    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-    export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
-    ### Some aliases
-    alias ps2='ps facux '
-    alias ps1='ps faxo "%U %t %p %a" '
-    alias af='ps af'
-    alias cls='clear'
-    alias ll='/bin/ls -laFh'
-    alias ls='/bin/ls -F'
-    alias df='df -h'
-    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
-    #alias bc='bc -l'
-    alias minicom='minicom -c on'
-    alias calc='calc -Cd '
-    alias bc='calc -Cd '
-fi;
diff --git a/target/device/jp/q5/target_skeleton/root/.empty b/target/device/jp/q5/target_skeleton/root/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/root/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/sbin/.empty b/target/device/jp/q5/target_skeleton/sbin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/sbin/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/tmp/.empty b/target/device/jp/q5/target_skeleton/tmp/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/tmp/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/usr/bin/.empty b/target/device/jp/q5/target_skeleton/usr/bin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/usr/bin/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/usr/lib/.empty b/target/device/jp/q5/target_skeleton/usr/lib/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/usr/lib/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/usr/sbin/.empty b/target/device/jp/q5/target_skeleton/usr/sbin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/jp/q5/target_skeleton/usr/sbin/.empty
+++ /dev/null
diff --git a/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script b/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script
deleted file mode 100755
index a52a7f812..000000000
--- a/target/device/jp/q5/target_skeleton/usr/share/udhcpc/default.script
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-
-[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
-
-RESOLV_CONF="/etc/resolv.conf"
-[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-[ -n "$subnet" ] && NETMASK="netmask $subnet"
-
-case "$1" in
-	deconfig)
-		/sbin/ifconfig $interface 0.0.0.0
-		;;
-
-	renew|bound)
-		/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
-
-		if [ -n "$router" ] ; then
-			echo "deleting routers"
-			while route del default gw 0.0.0.0 dev $interface ; do
-				:
-			done
-
-			for i in $router ; do
-				route add default gw $i dev $interface
-			done
-		fi
-
-		echo -n > $RESOLV_CONF
-		[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
-		for i in $dns ; do
-			echo adding dns $i
-			echo nameserver $i >> $RESOLV_CONF
-		done
-		;;
-esac
-
-exit 0
diff --git a/target/device/jp/q5/target_skeleton/var/lib/pcmcia b/target/device/jp/q5/target_skeleton/var/lib/pcmcia
deleted file mode 120000
index f1fde8c10..000000000
--- a/target/device/jp/q5/target_skeleton/var/lib/pcmcia
+++ /dev/null
@@ -1 +0,0 @@
-../../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/var/lock b/target/device/jp/q5/target_skeleton/var/lock
deleted file mode 120000
index 1431b0e43..000000000
--- a/target/device/jp/q5/target_skeleton/var/lock
+++ /dev/null
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/var/log b/target/device/jp/q5/target_skeleton/var/log
deleted file mode 120000
index 1431b0e43..000000000
--- a/target/device/jp/q5/target_skeleton/var/log
+++ /dev/null
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/var/pcmcia b/target/device/jp/q5/target_skeleton/var/pcmcia
deleted file mode 120000
index 1431b0e43..000000000
--- a/target/device/jp/q5/target_skeleton/var/pcmcia
+++ /dev/null
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/var/run b/target/device/jp/q5/target_skeleton/var/run
deleted file mode 120000
index 1431b0e43..000000000
--- a/target/device/jp/q5/target_skeleton/var/run
+++ /dev/null
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/var/spool b/target/device/jp/q5/target_skeleton/var/spool
deleted file mode 120000
index 1431b0e43..000000000
--- a/target/device/jp/q5/target_skeleton/var/spool
+++ /dev/null
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/target_skeleton/var/tmp b/target/device/jp/q5/target_skeleton/var/tmp
deleted file mode 120000
index 1431b0e43..000000000
--- a/target/device/jp/q5/target_skeleton/var/tmp
+++ /dev/null
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
diff --git a/target/device/jp/q5/uClibc.config.mipsel b/target/device/jp/q5/uClibc.config.mipsel
deleted file mode 100644
index d0fc762a9..000000000
--- a/target/device/jp/q5/uClibc.config.mipsel
+++ /dev/null
@@ -1,163 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-TARGET_mips=y
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_x86_64 is not set
-
-#
-# Target Architecture Features and Options
-#
-HAVE_ELF=y
-ARCH_SUPPORTS_LITTLE_ENDIAN=y
-TARGET_ARCH="mips"
-ARCH_CFLAGS="-mno-split-addresses"
-ARCH_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_MIPS_ISA_1 is not set
-# CONFIG_MIPS_ISA_2 is not set
-# CONFIG_MIPS_ISA_3 is not set
-# CONFIG_MIPS_ISA_4 is not set
-CONFIG_MIPS_ISA_MIPS32=y
-# CONFIG_MIPS_ISA_MIPS64 is not set
-ARCH_LITTLE_ENDIAN=y
-# ARCH_BIG_ENDIAN is not set
-# ARCH_HAS_NO_MMU is not set
-ARCH_HAS_MMU=y
-UCLIBC_HAS_FLOATS=y
-HAS_FPU=y
-DO_C99_MATH=y
-KERNEL_SOURCE="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/toolchain_build_mipsel/linux"
-C_SYMBOL_PREFIX=""
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# HAVE_NO_SHARED is not set
-HAVE_SHARED=y
-# ARCH_HAS_NO_LDSO is not set
-BUILD_UCLIBC_LDSO=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-LDSO_RUNPATH=y
-# DL_FINI_CRT_COMPAT is not set
-UCLIBC_CTOR_DTOR=y
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-UCLIBC_HAS_LFS=y
-# UCLIBC_STATIC_LDCONFIG is not set
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-HAS_SHADOW=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_STRING_GENERIC_OPT=y
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# uClibc security related options
-#
-# UCLIBC_SECURITY is not set
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/build_mipsel/staging_dir/bin/mipsel-linux-uclibc-"
-# DODEBUG is not set
-# DODEBUG_PT is not set
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-WARNINGS="-Wall"
-# UCLIBC_MJN3_ONLY is not set