summaryrefslogtreecommitdiffstats
path: root/target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode80
diff options
context:
space:
mode:
authorDavid Anders <dave123@abcsinc.com>2006-01-19 13:51:23 +0000
committerDavid Anders <dave123@abcsinc.com>2006-01-19 13:51:23 +0000
commit5d46a9bb79cb1430bbb96311ed94dae0a22f30ac (patch)
tree64da6e1a5d78407e3c80de9fa66bd5b3bac75cf6 /target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode80
parent64c3f9b0e87be53a0d5dea71f2565234814b1b0f (diff)
downloadbuildroot-novena-5d46a9bb79cb1430bbb96311ed94dae0a22f30ac.tar.gz
buildroot-novena-5d46a9bb79cb1430bbb96311ed94dae0a22f30ac.zip
add Sharp LH79520 based LNode80 target
Diffstat (limited to 'target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode80')
-rw-r--r--target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode8014498
1 files changed, 14498 insertions, 0 deletions
diff --git a/target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode80 b/target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode80
new file mode 100644
index 000000000..7b0be87f0
--- /dev/null
+++ b/target/device/Sharp/LNode80/kernel-patches/002-patch-2.4.26-vrs1-lnode80
@@ -0,0 +1,14498 @@
+diff -urN linux-2.4.26/arch/arm/boot/compressed/head.S linux-2.4.26-vrs1-lnode80/arch/arm/boot/compressed/head.S
+--- linux-2.4.26/arch/arm/boot/compressed/head.S 2005-11-02 16:54:16.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/boot/compressed/head.S 2005-11-02 17:37:31.000000000 -0400
+@@ -17,6 +17,7 @@
+ * 100% relocatable. Any attempt to do so will result in a crash.
+ * Please select one of the following when turning on debugging.
+ */
++#define DEBUG
+ #ifdef DEBUG
+ #if defined(CONFIG_DEBUG_DC21285_PORT)
+ .macro loadsp, rb
+@@ -81,6 +82,20 @@
+ */
+ str \rb, [r3, #0x14] @ UTDR
+ .endm
++#elif 1 /* Sharp LH79520-type */
++ .macro loadsp, rb
++ ldr \rb, =0xfffc0000 @ UART1 base
++ .endm
++ .macro writeb, rb
++ strb \rb, [r3, #0]
++ .endm
++#elif 0 /* Sharp LH7A400-type */
++ .macro loadsp, rb
++ ldr \rb, =0x80000700 @ UART1 base
++ .endm
++ .macro writeb, rb
++ strb \rb, [r3, #0]
++ .endm
+ #else
+ #error no serial architecture defined
+ #endif
+@@ -97,6 +112,7 @@
+ bl phex
+ .endm
+
++#undef DEBUG
+ .macro debug_reloc_start
+ #ifdef DEBUG
+ kputc #'\n'
+@@ -140,7 +156,9 @@
+ .word 0x016f2818 @ Magic numbers to help the loader
+ .word start @ absolute load/run zImage address
+ .word _edata @ zImage end address
+-1: mov r7, r1 @ save architecture ID
++1: @mov r7, r1 @ save architecture ID
++ mov r7, #0x300
++ orr r7,r7,#0xe7
+ mov r8, #0 @ save r0
+
+ #ifndef __ARM_ARCH_2__
+@@ -314,6 +332,11 @@
+ LC1: .word reloc_end - reloc_start
+ .size LC0, . - LC0
+
++ .type proc_lh7a400_type,#object
++proc_lh7a400_type:
++ .word 0x41029220
++ .size proc_lh7a400_type, . - proc_lh7a400_type
++
+ /*
+ * Turn on the cache. We need to setup some page tables so that we
+ * can have both the I and D caches on.
+diff -urN linux-2.4.26/arch/arm/boot/Makefile linux-2.4.26-vrs1-lnode80/arch/arm/boot/Makefile
+--- linux-2.4.26/arch/arm/boot/Makefile 2003-08-25 07:44:39.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/boot/Makefile 2005-11-02 17:37:31.000000000 -0400
+@@ -101,6 +101,24 @@
+ INITRD_VIRT = 0x0C800000
+ endif
+
++ifeq ($(CONFIG_ARCH_LH79520),y)
++ ZTEXTADDR = 0x20008000
++ ZBSSADDR = 0x20200000
++ ZRELADDR = 0x20008000
++ INITRD_PHYS = 0x20400000
++ INITRD_VIRT = 0xC0400000
++ PARAMS_PHYS = 0x20110000
++endif
++
++ifeq ($(CONFIG_ARCH_LH7A400),y)
++ ZTEXTADDR = 0xC0008000
++ ZBSSADDR = 0xC0200000
++ ZRELADDR = 0xC0008000
++ INITRD_PHYS = 0xC4000000
++ INITRD_VIRT = 0xC4000000
++ PARAMS_PHYS = 0xC0000100
++endif
++
+ ifeq ($(CONFIG_ARCH_SA1100),y)
+ ZRELADDR = 0xc0008000
+ # No defconfig file to move this into...
+diff -urN linux-2.4.26/arch/arm/config.in linux-2.4.26-vrs1-lnode80/arch/arm/config.in
+--- linux-2.4.26/arch/arm/config.in 2005-11-02 16:54:16.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/config.in 2005-11-02 17:37:31.000000000 -0400
+@@ -48,6 +48,8 @@
+ RiscPC CONFIG_ARCH_RPC \
+ RiscStation CONFIG_ARCH_RISCSTATION \
+ SA1100-based CONFIG_ARCH_SA1100 \
++ LH79520-based CONFIG_ARCH_LH79520 \
++ LH7A400-based CONFIG_ARCH_LH7A400 \
+ Shark CONFIG_ARCH_SHARK \
+ AT91RM9200-based CONFIG_ARCH_AT91RM9200 " RiscPC
+
+@@ -182,6 +184,17 @@
+
+ endmenu
+
++mainmenu_option next_comment
++comment 'Sharp LH79520 Implementations'
++dep_bool ' LH79520 EVB' CONFIG_LH79520_EVB $CONFIG_ARCH_LH79520
++dep_bool ' 520 BOGUS EVB' CONFIG_BOGON_EVB $CONFIG_ARCH_LH79520
++endmenu
++
++mainmenu_option next_comment
++comment 'Sharp LH7A400 Implementations'
++dep_bool ' LH7A400 EVB' CONFIG_LH7A400_EVB $CONFIG_ARCH_LH7A400
++endmenu
++
+ # Definitions to make life easier
+ if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \
+ "$CONFIG_ARCH_RPC" = "y" ]; then
+@@ -295,6 +308,7 @@
+ # ARM720T
+ if [ "$CONFIG_ARCH_CLPS711X" = "y" -o \
+ "$CONFIG_ARCH_L7200" = "y" -o \
++ "$CONFIG_ARCH_LH79520" = "y" -o \
+ "$CONFIG_ARCH_CDB89712" = "y" ]; then
+ define_bool CONFIG_CPU_ARM720T y
+ else
+@@ -320,7 +334,8 @@
+
+
+ # ARM922T
+-if [ "$CONFIG_ARCH_CAMELOT" = "y" ]; then
++if [ "$CONFIG_ARCH_CAMELOT" = "y" -o \
++ "$CONFIG_ARCH_LH7A400" = "y" ]; then
+ define_bool CONFIG_CPU_ARM922T y
+ else
+ if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
+@@ -399,6 +414,7 @@
+ "$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
+ "$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
+ "$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100" = "y" -o \
++ "$CONFIG_ARCH_LH79520" = "y" -o "$CONFIG_ARCH_LH7A400" = "y" -o \
+ "$CONFIG_ARCH_L7200" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" -o \
+ "$CONFIG_ARCH_CAMELOT" = "y" -o "$CONFIG_ARCH_MX1ADS" = "y" -o \
+ "$CONFIG_ARCH_OMAHA" = "y" -o "$CONFIG_ARCH_AT91RM9200" = "y" ]; then
+@@ -440,6 +456,8 @@
+
+ # Select various configuration options depending on the machine type
+ if [ "$CONFIG_ARCH_EDB7211" = "y" -o \
++ "$CONFIG_ARCH_LH79520" = "y" -o \
++ "$CONFIG_ARCH_LH7A400" = "y" -o \
+ "$CONFIG_ARCH_SA1100" = "y" -o \
+ "$CONFIG_ARCH_RISCSTATION" = "y" ]; then
+ define_bool CONFIG_DISCONTIGMEM y
+@@ -473,6 +491,8 @@
+ "$CONFIG_ARCH_EBSA110" = "y" -o \
+ "$CONFIG_ARCH_CDB89712" = "y" -o \
+ "$CONFIG_ARCH_EDB7211" = "y" -o \
++ "$CONFIG_ARCH_LH79520" = "y" -o \
++ "$CONFIG_ARCH_LH7A400" = "y" -o \
+ "$CONFIG_ARCH_SA1100" = "y" ]; then
+ define_bool CONFIG_ISA y
+ else
+@@ -690,6 +710,8 @@
+ "$CONFIG_ARCH_TBOX" = "y" -o \
+ "$CONFIG_ARCH_CLPS7500" = "y" -o \
+ "$CONFIG_ARCH_P720T" = "y" -o \
++ "$CONFIG_ARCH_LH79520" = "y" -o \
++ "$CONFIG_ARCH_LH7A400" = "y" -o \
+ "$CONFIG_ARCH_ANAKIN" = "y" -o \
+ "$CONFIG_ARCH_MX1ADS" = "y" ]; then
+ define_bool CONFIG_PC_KEYMAP y
+@@ -707,6 +729,8 @@
+ "$CONFIG_ARCH_TBOX" = "y" -o \
+ "$CONFIG_ARCH_SHARK" = "y" -o \
+ "$CONFIG_ARCH_SA1100" = "y" -o \
++ "$CONFIG_ARCH_LH79520" = "y" -o \
++ "$CONFIG_ARCH_LH7A400" = "y" -o \
+ "$CONFIG_PCI" = "y" ]; then
+ mainmenu_option next_comment
+ comment 'Sound'
+diff -urN linux-2.4.26/arch/arm/def-configs/lnode80 linux-2.4.26-vrs1-lnode80/arch/arm/def-configs/lnode80
+--- linux-2.4.26/arch/arm/def-configs/lnode80 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/def-configs/lnode80 2005-11-03 09:11:23.000000000 -0400
+@@ -0,0 +1,804 @@
++#
++# Automatically generated make config: don't edit
++#
++CONFIG_ARM=y
++# CONFIG_EISA is not set
++# CONFIG_SBUS is not set
++# CONFIG_MCA is not set
++CONFIG_UID16=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_GENERIC_BUST_SPINLOCK is not set
++# CONFIG_GENERIC_ISA_DMA is not set
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++# CONFIG_OBSOLETE is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_KMOD is not set
++
++#
++# System Type
++#
++# CONFIG_ARCH_ANAKIN is not set
++# CONFIG_ARCH_ARCA5K is not set
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_CAMELOT is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_OMAHA is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_MX1ADS is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_RISCSTATION is not set
++# CONFIG_ARCH_SA1100 is not set
++CONFIG_ARCH_LH79520=y
++# CONFIG_ARCH_LH7A400 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_AT91RM9200 is not set
++
++#
++# Archimedes/A5000 Implementations
++#
++
++#
++# Archimedes/A5000 Implementations (select only ONE)
++#
++# CONFIG_ARCH_ARC is not set
++# CONFIG_ARCH_A5K is not set
++
++#
++# Footbridge Implementations
++#
++# CONFIG_ARCH_CATS is not set
++# CONFIG_ARCH_PERSONAL_SERVER is not set
++# CONFIG_ARCH_EBSA285_ADDIN is not set
++# CONFIG_ARCH_EBSA285_HOST is not set
++# CONFIG_ARCH_NETWINDER is not set
++
++#
++# SA11x0 Implementations
++#
++# CONFIG_SA1100_ACCELENT is not set
++# CONFIG_SA1100_ASSABET is not set
++# CONFIG_ASSABET_NEPONSET is not set
++# CONFIG_SA1100_ADSAGC is not set
++# CONFIG_SA1100_ADSBITSY is not set
++# CONFIG_SA1100_ADSBITSYPLUS is not set
++# CONFIG_SA1100_BRUTUS is not set
++# CONFIG_SA1100_CEP is not set
++# CONFIG_SA1100_CERF is not set
++# CONFIG_SA1100_H3100 is not set
++# CONFIG_SA1100_H3600 is not set
++# CONFIG_SA1100_H3800 is not set
++# CONFIG_SA1100_H3XXX is not set
++# CONFIG_H3600_SLEEVE is not set
++# CONFIG_SA1100_EXTENEX1 is not set
++# CONFIG_SA1100_FLEXANET is not set
++# CONFIG_SA1100_FREEBIRD is not set
++# CONFIG_SA1100_FRODO is not set
++# CONFIG_SA1100_GRAPHICSCLIENT is not set
++# CONFIG_SA1100_GRAPHICSMASTER is not set
++# CONFIG_SA1100_HACKKIT is not set
++# CONFIG_SA1100_BADGE4 is not set
++# CONFIG_SA1100_JORNADA720 is not set
++# CONFIG_SA1100_HUW_WEBPANEL is not set
++# CONFIG_SA1100_ITSY is not set
++# CONFIG_SA1100_LART is not set
++# CONFIG_SA1100_NANOENGINE is not set
++# CONFIG_SA1100_OMNIMETER is not set
++# CONFIG_SA1100_PANGOLIN is not set
++# CONFIG_SA1100_PLEB is not set
++# CONFIG_SA1100_PT_SYSTEM3 is not set
++# CONFIG_SA1100_SHANNON is not set
++# CONFIG_SA1100_SHERMAN is not set
++# CONFIG_SA1100_SIMPAD is not set
++# CONFIG_SA1100_SIMPUTER is not set
++# CONFIG_SA1100_PFS168 is not set
++# CONFIG_SA1100_VICTOR is not set
++# CONFIG_SA1100_XP860 is not set
++# CONFIG_SA1100_YOPY is not set
++# CONFIG_SA1100_USB is not set
++# CONFIG_SA1100_USB_NETLINK is not set
++# CONFIG_SA1100_USB_CHAR is not set
++# CONFIG_SA1100_SSP is not set
++
++#
++# AT91RM9200 Implementations
++#
++# CONFIG_ARCH_AT91RM9200DK is not set
++# CONFIG_MACH_CSB337 is not set
++
++#
++# CLPS711X/EP721X Implementations
++#
++# CONFIG_ARCH_AUTCPU12 is not set
++# CONFIG_ARCH_CDB89712 is not set
++# CONFIG_ARCH_CLEP7312 is not set
++# CONFIG_ARCH_EDB7211 is not set
++# CONFIG_ARCH_FORTUNET is not set
++# CONFIG_ARCH_GUIDEA07 is not set
++# CONFIG_ARCH_P720T is not set
++# CONFIG_ARCH_EP7211 is not set
++# CONFIG_ARCH_EP7212 is not set
++
++#
++# Sharp LH79520 Implementations
++#
++CONFIG_LH79520_EVB=y
++# CONFIG_BOGON_EVB is not set
++
++#
++# Sharp LH7A400 Implementations
++#
++# CONFIG_LH7A400_EVB is not set
++# CONFIG_ARCH_ACORN is not set
++# CONFIG_PLD is not set
++# CONFIG_FOOTBRIDGE is not set
++# CONFIG_FOOTBRIDGE_HOST is not set
++# CONFIG_FOOTBRIDGE_ADDIN is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++# CONFIG_CPU_26 is not set
++# CONFIG_CPU_ARM610 is not set
++# CONFIG_CPU_ARM710 is not set
++CONFIG_CPU_ARM720T=y
++# CONFIG_CPU_ARM920T is not set
++# CONFIG_CPU_ARM922T is not set
++# CONFIG_CPU_ARM926T is not set
++# CONFIG_CPU_ARM1020 is not set
++# CONFIG_CPU_ARM1020E is not set
++# CONFIG_CPU_ARM1022 is not set
++# CONFIG_CPU_ARM1026 is not set
++# CONFIG_CPU_SA110 is not set
++# CONFIG_CPU_SA1100 is not set
++# CONFIG_CPU_32v3 is not set
++CONFIG_CPU_32v4=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++CONFIG_DISCONTIGMEM=y
++
++#
++# General setup
++#
++# CONFIG_PCI is not set
++CONFIG_ISA=y
++# CONFIG_ISA_DMA is not set
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_ZBOOT_ROM_TEXT=0
++CONFIG_ZBOOT_ROM_BSS=0
++# CONFIG_HOTPLUG is not set
++# CONFIG_PCMCIA is not set
++CONFIG_NET=y
++CONFIG_SYSVIPC=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++CONFIG_SYSCTL=y
++
++#
++# At least one math emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++CONFIG_KCORE_ELF=y
++# CONFIG_KCORE_AOUT is not set
++CONFIG_BINFMT_AOUT=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_PM is not set
++# CONFIG_ARTHUR is not set
++CONFIG_CMDLINE=""
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_CONCAT is not set
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_NOSWAP=y
++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
++# CONFIG_MTD_CFI_GEOMETRY is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++# CONFIG_MTD_AMDSTD is not set
++# CONFIG_MTD_SHARP is not set
++# CONFIG_MTD_JEDEC is not set
++
++#
++# Mapping drivers for chip access
++#
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=40400000
++CONFIG_MTD_PHYSMAP_LEN=400000
++CONFIG_MTD_PHYSMAP_BUSWIDTH=2
++# CONFIG_MTD_NORA is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_CDB89712 is not set
++# CONFIG_MTD_SA1100 is not set
++# CONFIG_MTD_DC21285 is not set
++# CONFIG_MTD_IQ80310 is not set
++# CONFIG_MTD_FORTUNET is not set
++# CONFIG_MTD_EPXA is not set
++# CONFIG_MTD_AUTCPU12 is not set
++# CONFIG_MTD_EDB7312 is not set
++# CONFIG_MTD_IMPA7 is not set
++# CONFIG_MTD_CEIVA is not set
++# CONFIG_MTD_PCI is not set
++# CONFIG_MTD_PCMCIA is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLKMTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC1000 is not set
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOCPROBE is not set
++
++#
++# NAND Flash Device Drivers
++#
++# CONFIG_MTD_NAND is not set
++
++#
++# Plug and Play configuration
++#
++# CONFIG_PNP is not set
++# CONFIG_ISAPNP is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_XD is not set
++# CONFIG_PARIDE is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_CISS_SCSI_TAPE is not set
++# CONFIG_CISS_MONITOR_THREAD is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_BLK_STATS is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++# CONFIG_BLK_DEV_MD is not set
++# CONFIG_MD_LINEAR is not set
++# CONFIG_MD_RAID0 is not set
++# CONFIG_MD_RAID1 is not set
++# CONFIG_MD_RAID5 is not set
++# CONFIG_MD_MULTIPATH is not set
++# CONFIG_BLK_DEV_LVM is not set
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++# CONFIG_NETLINK_DEV is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_FILTER is not set
++CONFIG_UNIX=y
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_INET_ECN is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_IPV6 is not set
++# CONFIG_KHTTPD is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++# CONFIG_ATM is not set
++# CONFIG_VLAN_8021Q is not set
++
++#
++#
++#
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++
++#
++# Appletalk devices
++#
++# CONFIG_DEV_APPLETALK is not set
++# CONFIG_DECNET is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_LLC is not set
++# CONFIG_NET_DIVERT is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_FASTROUTE is not set
++# CONFIG_NET_HW_FLOWCONTROL is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++
++#
++# Network device support
++#
++# CONFIG_NETDEVICES is not set
++
++#
++# Amateur Radio support
++#
++# CONFIG_HAMRADIO is not set
++
++#
++# IrDA (infrared) support
++#
++# CONFIG_IRDA is not set
++
++#
++# ATA/ATAPI/MFM/RLL support
++#
++# CONFIG_IDE is not set
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI support
++#
++# CONFIG_SCSI is not set
++
++#
++# I2O device support
++#
++# CONFIG_I2O is not set
++# CONFIG_I2O_BLOCK is not set
++# CONFIG_I2O_LAN is not set
++# CONFIG_I2O_SCSI is not set
++# CONFIG_I2O_PROC is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input core support
++#
++# CONFIG_INPUT is not set
++# CONFIG_INPUT_KEYBDEV is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_UINPUT is not set
++# CONFIG_INPUT_MX1TS is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++# CONFIG_SERIAL is not set
++# CONFIG_SERIAL_EXTENDED is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_ANAKIN is not set
++# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
++# CONFIG_SERIAL_AMBA is not set
++# CONFIG_SERIAL_AMBA_CONSOLE is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++# CONFIG_SERIAL_LH7A400 is not set
++# CONFIG_SERIAL_CLPS711X is not set
++# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
++# CONFIG_SERIAL_21285 is not set
++# CONFIG_SERIAL_21285_OLD is not set
++# CONFIG_SERIAL_21285_CONSOLE is not set
++# CONFIG_SERIAL_UART00 is not set
++# CONFIG_SERIAL_UART00_CONSOLE is not set
++# CONFIG_SERIAL_SA1100 is not set
++# CONFIG_SERIAL_SA1100_CONSOLE is not set
++# CONFIG_SERIAL_OMAHA is not set
++# CONFIG_SERIAL_OMAHA_CONSOLE is not set
++# CONFIG_SERIAL_AT91 is not set
++# CONFIG_SERIAL_AT91_CONSOLE is not set
++# CONFIG_SERIAL_8250 is not set
++# CONFIG_SERIAL_8250_CONSOLE is not set
++# CONFIG_SERIAL_8250_EXTENDED is not set
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++# CONFIG_SERIAL_8250_SHARE_IRQ is not set
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_MULTIPORT is not set
++# CONFIG_SERIAL_8250_HUB6 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_UNIX98_PTY_COUNT=256
++
++#
++# I2C support
++#
++# CONFIG_I2C is not set
++
++#
++# L3 serial bus support
++#
++# CONFIG_L3 is not set
++# CONFIG_L3_ALGOBIT is not set
++# CONFIG_L3_BIT_SA1100_GPIO is not set
++
++#
++# Other L3 adapters
++#
++# CONFIG_L3_SA1111 is not set
++# CONFIG_BIT_SA1100_GPIO is not set
++
++#
++# Mice
++#
++# CONFIG_BUSMOUSE is not set
++CONFIG_MOUSE=y
++CONFIG_PSMOUSE=y
++# CONFIG_82C710_MOUSE is not set
++# CONFIG_PC110_PAD is not set
++# CONFIG_MK712_MOUSE is not set
++
++#
++# Joysticks
++#
++# CONFIG_INPUT_GAMEPORT is not set
++
++#
++# Input core support is needed for gameports
++#
++
++#
++# Input core support is needed for joysticks
++#
++# CONFIG_QIC02_TAPE is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_IPMI_PANIC_EVENT is not set
++# CONFIG_IPMI_DEVICE_INTERFACE is not set
++# CONFIG_IPMI_KCS is not set
++# CONFIG_IPMI_WATCHDOG is not set
++
++#
++# Watchdog Cards
++#
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++# CONFIG_ACQUIRE_WDT is not set
++# CONFIG_ADVANTECH_WDT is not set
++# CONFIG_ALIM1535_WDT is not set
++# CONFIG_ALIM7101_WDT is not set
++# CONFIG_SC520_WDT is not set
++# CONFIG_PCWATCHDOG is not set
++# CONFIG_21285_WATCHDOG is not set
++# CONFIG_977_WATCHDOG is not set
++# CONFIG_SA1100_WATCHDOG is not set
++# CONFIG_LH79520_WATCHDOG is not set
++# CONFIG_EPXA_WATCHDOG is not set
++# CONFIG_OMAHA_WATCHDOG is not set
++# CONFIG_AT91_WATCHDOG is not set
++# CONFIG_EUROTECH_WDT is not set
++# CONFIG_IB700_WDT is not set
++# CONFIG_WAFER_WDT is not set
++# CONFIG_I810_TCO is not set
++# CONFIG_MIXCOMWD is not set
++# CONFIG_60XX_WDT is not set
++# CONFIG_SC1200_WDT is not set
++# CONFIG_SCx200_WDT is not set
++# CONFIG_SOFT_WATCHDOG is not set
++# CONFIG_W83877F_WDT is not set
++# CONFIG_WDT is not set
++# CONFIG_WDTPCI is not set
++# CONFIG_MACHZ_WDT is not set
++# CONFIG_AMD7XX_TCO is not set
++# CONFIG_SCx200 is not set
++# CONFIG_SCx200_GPIO is not set
++# CONFIG_LH79520_PWM is not set
++# CONFIG_AMD_PM768 is not set
++# CONFIG_NVRAM is not set
++# CONFIG_RTC is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++
++#
++# Ftape, the floppy tape device driver
++#
++# CONFIG_FTAPE is not set
++# CONFIG_AGP is not set
++
++#
++# Direct Rendering Manager (XFree86 DRI support)
++#
++# CONFIG_DRM is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# File systems
++#
++# CONFIG_QUOTA is not set
++# CONFIG_QFMT_V2 is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_REISERFS_CHECK is not set
++# CONFIG_REISERFS_PROC_INFO is not set
++# CONFIG_ADFS_FS is not set
++# CONFIG_ADFS_FS_RW is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BEFS_DEBUG is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_JBD is not set
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++# CONFIG_UMSDOS_FS is not set
++CONFIG_VFAT_FS=y
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_CRAMFS is not set
++# CONFIG_TMPFS is not set
++CONFIG_RAMFS=y
++# CONFIG_ISO9660_FS is not set
++# CONFIG_JOLIET is not set
++# CONFIG_ZISOFS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_JFS_DEBUG is not set
++# CONFIG_JFS_STATISTICS is not set
++CONFIG_MINIX_FS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_NTFS_FS is not set
++# CONFIG_NTFS_RW is not set
++# CONFIG_HPFS_FS is not set
++CONFIG_PROC_FS=y
++# CONFIG_DEVFS_FS is not set
++# CONFIG_DEVFS_MOUNT is not set
++# CONFIG_DEVFS_DEBUG is not set
++CONFIG_DEVPTS_FS=y
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_QNX4FS_RW is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_EXT2_FS=y
++# CONFIG_SYSV_FS is not set
++# CONFIG_UDF_FS is not set
++# CONFIG_UDF_RW is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_UFS_FS_WRITE is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_RT is not set
++# CONFIG_XFS_TRACE is not set
++# CONFIG_XFS_DEBUG is not set
++
++#
++# Network File Systems
++#
++# CONFIG_CODA_FS is not set
++# CONFIG_INTERMEZZO_FS is not set
++# CONFIG_NFS_FS is not set
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_ROOT_NFS is not set
++# CONFIG_NFSD is not set
++# CONFIG_NFSD_V3 is not set
++# CONFIG_NFSD_TCP is not set
++# CONFIG_SUNRPC is not set
++# CONFIG_LOCKD is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_NCPFS_PACKET_SIGNING is not set
++# CONFIG_NCPFS_IOCTL_LOCKING is not set
++# CONFIG_NCPFS_STRONG is not set
++# CONFIG_NCPFS_NFS_NS is not set
++# CONFIG_NCPFS_OS2_NS is not set
++# CONFIG_NCPFS_SMALLDOS is not set
++# CONFIG_NCPFS_NLS is not set
++# CONFIG_NCPFS_EXTRAS is not set
++# CONFIG_ZISOFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_SMB_NLS is not set
++CONFIG_NLS=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Console drivers
++#
++CONFIG_PC_KEYMAP=y
++# CONFIG_VGA_CONSOLE is not set
++
++#
++# Frame-buffer support
++#
++# CONFIG_FB is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# Multimedia Capabilities Port drivers
++#
++# CONFIG_MCP is not set
++# CONFIG_MCP_SA1100 is not set
++# CONFIG_MCP_UCB1200 is not set
++# CONFIG_MCP_UCB1200_AUDIO is not set
++# CONFIG_MCP_UCB1200_TS is not set
++
++#
++# Misc devices
++#
++# CONFIG_TOUCHSCREEN_LH79520 is not set
++# CONFIG_EEPROM_LH79520 is not set
++# CONFIG_7SEGMENT_LH79520 is not set
++
++#
++# USB support
++#
++# CONFIG_USB is not set
++
++#
++# Support for USB gadgets
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# Bluetooth support
++#
++# CONFIG_BLUEZ is not set
++
++#
++# Kernel hacking
++#
++CONFIG_FRAME_POINTER=y
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_NO_PGT_CACHE is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_WAITQ is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_ERRORS=y
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_DC21285_PORT is not set
++# CONFIG_DEBUG_CLPS711X_UART2 is not set
++
++#
++# Library routines
++#
++# CONFIG_CRC32 is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
+diff -urN linux-2.4.26/arch/arm/kernel/debug-armv.S linux-2.4.26-vrs1-lnode80/arch/arm/kernel/debug-armv.S
+--- linux-2.4.26/arch/arm/kernel/debug-armv.S 2003-08-25 07:44:39.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/kernel/debug-armv.S 2005-11-02 17:37:31.000000000 -0400
+@@ -470,6 +470,53 @@
+
+
+
++#elif defined(CONFIG_ARCH_LH79520)
++
++ .macro addruart,rx
++ ldr \rx, =0xfffc1000 @UART1 base
++ .endm
++
++ .macro senduart,rd,rx
++ strb \rd, [\rx] @ UART1_DR
++ .endm
++
++ .macro busyuart,rd,rx @ spin while busy
++1001: ldr \rd, [\rx, #0x18] @ UART1_FR
++ tst \rd, #1 << 3 @ BUSY ?
++ bne 1001b @ yes, spin
++ .endm
++
++ .macro waituart,rd,rx @ wait for Tx FIFO room
++1001: ldrb \rd, [\rx, #0x18] @ UART1_FR
++ tst \rd, #1 << 5 @ TXFF full?
++ bne 1001b @ yes, spin
++ .endm
++
++#elif defined(CONFIG_ARCH_LH7A400)
++
++ .macro addruart,rx
++ mrc p15, 0, \rx, c1, c0
++ tst \rx, #1 @ MMU enabled?
++ ldr \rx, =UART2_PHYS @ physical base address
++ orrne \rx, \rx, #0xf8000000 @ virtual base
++ .endm
++
++ .macro senduart,rd,rx
++ strb \rd, [\rx] @ UART3_DR
++ .endm
++
++ .macro busyuart,rd,rx @ spin while busy
++1001: ldr \rd, [\rx, #0x10] @ UART3_FR
++ tst \rd, #1 << 3 @ BUSY ?
++ bne 1001b @ yes, spin
++ .endm
++
++ .macro waituart,rd,rx @ wait for Tx FIFO room
++1001: ldrb \rd, [\rx, #0x10] @ UART3_FR
++ tst \rd, #1 << 5 @ TXFF full?
++ bne 1001b @ yes, spin
++ .endm
++
+ #else
+ #error Unknown architecture
+ #endif
+diff -urN linux-2.4.26/arch/arm/kernel/entry-armv.S linux-2.4.26-vrs1-lnode80/arch/arm/kernel/entry-armv.S
+--- linux-2.4.26/arch/arm/kernel/entry-armv.S 2005-11-02 16:54:17.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/kernel/entry-armv.S 2005-11-02 17:37:31.000000000 -0400
+@@ -615,6 +615,49 @@
+ .text
+ .endm
+
++#elif defined(CONFIG_ARCH_LH79520)
++#include <asm/arch/hardware.h>
++
++ .macro disable_fiq
++ .endm
++
++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
++ ldr \irqstat, =VIC_BASE @ Virt addr IRQ regs
++ ldr \irqstat, [\irqstat, #0] @ get masked interrupt status
++ mov \irqnr, #0
++1001: tst \irqstat, #1
++ addeq \irqnr, \irqnr, #1
++ moveq \irqstat, \irqstat, lsr #1
++ tsteq \irqnr, #32
++ beq 1001b
++ teq \irqnr, #32
++ .endm
++
++ .macro irq_prio_table
++ .endm
++
++#elif defined(CONFIG_ARCH_LH7A400)
++#include <asm/arch/hardware.h>
++
++ .macro disable_fiq
++ .endm
++
++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
++ ldr \irqstat, =IO_ADDRESS(INTC_PHYS) @ Virt addr IRQ regs
++ ldr \irqstat, [\irqstat, #0] @ get masked interrupt status
++ mov \irqnr, #0
++1001: tst \irqstat, #1
++ bne 1002f
++ add \irqnr, \irqnr, #1
++ mov \irqstat, \irqstat, lsr #1
++ cmp \irqnr, #28
++ bcc 1001b
++1002: /* EQ will be set if we reach 28 */
++ .endm
++
++ .macro irq_prio_table
++ .endm
++
+ #else
+ #error Unknown architecture
+ #endif
+diff -urN linux-2.4.26/arch/arm/kernel/irq.c linux-2.4.26-vrs1-lnode80/arch/arm/kernel/irq.c
+--- linux-2.4.26/arch/arm/kernel/irq.c 2005-11-02 16:54:17.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/kernel/irq.c 2005-11-02 17:37:31.000000000 -0400
+@@ -216,6 +216,18 @@
+
+ desc->triggered = 1;
+
++#ifdef CONFIG_ARCH_LH79520
++ if( irq < 8) { /* external interrupt */
++ vicRegs_t *vic = (vicRegs_t *)VIC_BASE;
++ rcpcRegs_t *rcpc = (rcpcRegs_t *)IO_ADDRESS( RCPC_PHYS);
++
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED; /* unlock RCPC registers */
++ barrier();
++ rcpc->intClear = (1 << irq); /* clear corresponding IRQ */
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED; /* lock RCPC registers */
++ }
++#endif
++
+ /*
+ * Acknowledge and clear the IRQ, but (if its
+ * a level-based IRQ, don't mask it)
+diff -urN linux-2.4.26/arch/arm/kernel/ptrace.c linux-2.4.26-vrs1-lnode80/arch/arm/kernel/ptrace.c
+--- linux-2.4.26/arch/arm/kernel/ptrace.c 2005-11-02 16:54:17.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/kernel/ptrace.c 2005-11-02 17:37:31.000000000 -0400
+@@ -594,6 +594,9 @@
+ */
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA:
++ if(data == 0xe7ffdefe)
++ data = 0xef9f0001;
++
+ ret = access_process_vm(child, addr, &data,
+ sizeof(unsigned long), 1);
+ if (ret == sizeof(unsigned long))
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/arch.c linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/arch.c
+--- linux-2.4.26/arch/arm/mach-lh79520/arch.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/arch.c 2005-11-03 10:30:56.000000000 -0400
+@@ -0,0 +1,65 @@
++/*
++ * linux/arch/arm/mach-lh79520/arch.c
++ *
++ * Architecture specific fixups.
++ *
++ * Copyright (C) 2001 Lineo, Inc
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++
++#include <asm/mach/arch.h>
++
++extern void genarch_init_irq( void);
++extern void lh79520_map_io( void);
++
++#ifdef CONFIG_ARCH_LH79520
++
++static void __init
++fixup_lh79520(struct machine_desc *desc, struct param_struct *unused,
++ char **cmdline, struct meminfo *mi)
++{
++ mi->nr_banks = 1;
++ mi->bank[0].start = PHYS_OFFSET;
++ mi->bank[0].size = (32*1024*1024);
++ mi->bank[0].node = 0;
++
++ ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
++ setup_ramdisk( 1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE);
++ setup_initrd( __phys_to_virt(0x20400000), 3 * 1024 * 1024);
++
++ /* Serial Console on UART 1 */
++ strcpy( *cmdline, "console=ttyAM1,115200");
++}
++
++
++MACHINE_START(LH79520EVB, "Sharp LH79520 Evaluation Board")
++ MAINTAINER("Duck")
++ BOOT_MEM( 0x20000000, 0xff800000, 0xff800000) // pio, vio must be 8MB
++ FIXUP( fixup_lh79520)
++ MAPIO( lh79520_map_io)
++ INITIRQ( genarch_init_irq)
++MACHINE_END
++#endif
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/dma.c linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/dma.c
+--- linux-2.4.26/arch/arm/mach-lh79520/dma.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/dma.c 2005-11-02 17:38:44.000000000 -0400
+@@ -0,0 +1,841 @@
++/*
++ * arch/arm/mach-lh79520/dma-lh79520.c
++ * Copyright (C) 2002 Embedix, Inc.
++ *
++ * Support functions for the Sharp LH79520 internal DMA channels.
++ *
++ * Based on arch/arm/mach-sa1100/dma-sa1100.c, which is
++ * Copyright (C) 2000 Nicolas Pitre
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++
++#include <asm/system.h>
++#include <asm/irq.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/dma.h>
++#include <asm/mach/dma.h>
++#include <asm/arch/iocon.h>
++
++
++#undef DEBUG
++
++#ifdef DEBUG
++#define DPRINTK( s, arg... ) printk( "dma<%s>: " s, dma->device_id , ##arg )
++#define DUMPREGS(r,d) \
++ printk( "regs=0x%x src=0x%x:%x dest=0x%x:%x count=%d control=0x%x tcnt=%d mask=0x%x status=0x%x\n", \
++ (u32)r, r->srcHi, r->srcLow, r->destHi, r->destLow, r->count, r->control, r->termCnt, d->mask, d->status)
++#define DUMPQ(d) dumpq(d)
++#else
++#define DPRINTK( x... )
++#define DUMPREGS(r,d)
++#define DUMPQ(d)
++#endif
++
++/*
++ * DMA channel registers structure
++ */
++typedef struct {
++ volatile u32 srcLow; /* Source base addr, low 16 bits */
++ volatile u32 srcHi; /* Source base addr, hi 16 bits */
++ volatile u32 destLow; /* Dest base addr, low 16 bits */
++ volatile u32 destHi; /* Dest base addr, hi 16 bits */
++ volatile u32 count; /* Maximum Count */
++ volatile u32 control; /* Control */
++ volatile u32 currSrcHi; /* Current src addr, hi 16 bits*/
++ volatile u32 currSrcLow; /* Current src addr, low 16 bits*/
++ volatile u32 currDstHi; /* Curr dest addr, hi 16 bits*/
++ volatile u32 currDstLow; /* Curr src addr, low 16 bits*/
++ volatile u32 termCnt; /* Terminal Count */
++} channelRegs_t;
++
++
++/*
++ * Control Register Bit Field
++ */
++#define DMAC_CTRL_ENABLE _BIT(0) /* Enable DMA */
++#define DMAC_CTRL_SOINC _BIT(1) /* Source Reg inc.bit */
++#define DMAC_CTRL_DEINC _BIT(2) /* Dest Reg inc.bit */
++/* Source Size */
++#define DMAC_CTRL_SOSIZE_1BYTE _SBF(3,0)
++#define DMAC_CTRL_SOSIZE_2BYTE _SBF(3,1)
++#define DMAC_CTRL_SOSIZE_4BYTE _SBF(3,2)
++/* Destination Size */
++#define DMAC_CTRL_DESIZE_1BYTE _SBF(7,0)
++#define DMAC_CTRL_DESIZE_2BYTE _SBF(7,1)
++#define DMAC_CTRL_DESIZE_4BYTE _SBF(7,2)
++/* Peripheral Burst Sizes */
++#define DMAC_CTRL_SOBURST_SINGLE _SBF(5,0) /* Single */
++#define DMAC_CTRL_SOBURST_4INC _SBF(5,1) /* 4 incrementing */
++#define DMAC_CTRL_SOBURST_8INC _SBF(5,2) /* 8 incrementing */
++#define DMAC_CTRL_SOBURST_16INC _SBF(5,3) /* 16 incrementing */
++/* Address Modes */
++#define DMAC_CTRL_ADDR_MODE_WRAP _SBF(9,0)
++#define DMAC_CTRL_ADDR_MODE_INCR _SBF(9,1)
++
++#define DMAC_CTRL_MEM2MEM _BIT(11) /* Memory to Memory */
++/* Direction */
++#define DMAC_CTRL_PERIPH_SOURCE _SBF(13,0)
++#define DMAC_CTRL_PERIPH_DEST _SBF(13,1)
++
++
++typedef struct {
++ channelRegs_t stream0; /* Data Stream 0 */
++ volatile u32 reserved0[5];
++ channelRegs_t stream1; /* Data Stream 1 */
++ volatile u32 reserved1[5];
++ channelRegs_t stream2; /* Data Stream 2 */
++ volatile u32 reserved2[5];
++ channelRegs_t stream3; /* Data Stream 3 */
++ volatile u32 reserved3;
++ volatile u32 mask;
++ volatile u32 clear;
++ volatile u32 status;
++ volatile u32 reserved4;
++} dmaRegs_t;
++
++channelRegs_t *streamRegs[] = {
++ &((dmaRegs_t *)IO_ADDRESS(DMAC_PHYS))->stream0,
++ &((dmaRegs_t *)IO_ADDRESS(DMAC_PHYS))->stream1,
++ &((dmaRegs_t *)IO_ADDRESS(DMAC_PHYS))->stream2,
++ &((dmaRegs_t *)IO_ADDRESS(DMAC_PHYS))->stream3
++};
++
++/*
++ * mask - Mask Register Bit Fields
++ * clear - Clear Register Bit Fields
++ * status - Clear Register Bit Fields
++ *
++ * Writing DMAC_xN to mask register enables corresponding interrupt
++ * Writing DMAC_xN to clear register disables corresponding interrupt
++ * AND'ing DMAC_xN with status register yields status
++ * Note: "ACTIVEx" constants are only applicable to Status Register
++ */
++#define DMAC_INT0 _BIT(0) /* Stream 0 Interrupt */
++#define DMAC_INT1 _BIT(1) /* Stream 1 Interrupt */
++#define DMAC_INT2 _BIT(2) /* Stream 2 Interrupt */
++#define DMAC_INT3 _BIT(3) /* Stream 3 Interrupt */
++#define DMAC_ERRINT0 _BIT(4) /* Stream 0 Error Interrupt */
++#define DMAC_ERRINT1 _BIT(5) /* Stream 1 Error Interrupt */
++#define DMAC_ERRINT2 _BIT(6) /* Stream 2 Error Interrupt */
++#define DMAC_ERRINT3 _BIT(7) /* Stream 3 Error Interrupt */
++#define DMAC_ACTIVE0 _BIT(8) /* Stream 0 Active */
++#define DMAC_ACTIVE1 _BIT(9) /* Stream 1 Active */
++#define DMAC_ACTIVE2 _BIT(10) /* Stream 2 Active */
++#define DMAC_ACTIVE3 _BIT(11) /* Stream 3 Active */
++
++/* all DMA error bits */
++#define DMAC_ERROR (DMAC_ERRINT0 | DMAC_ERRINT1 | DMAC_ERRINT2 | DMAC_ERRINT3 )
++
++/* all DMA done bits */
++#define DMAC_DONE (DMAC_INT0 | DMAC_INT1 | DMAC_INT2 | DMAC_INT3)
++
++/* all the bits in the clear register */
++#define DMAC_CLEAR_ALL (DMAC_DONE | DMAC_ERROR)
++
++
++#include "dma.h"
++
++lh79520_dma_t dma_chan[LH79520_DMA_CHANNELS];
++
++/*
++ * Maximum physical DMA buffer size
++ */
++#define MAX_DMA_SIZE 0x3ffff
++#define MAX_DMA_ORDER 18
++
++
++static inline void dumpq (lh79520_dma_t *dma)
++{
++ dma_buf_t *p=dma->tail;
++
++ printk( "Q: curr=0x%p tail=0x%p head=0x%p bid: ", dma->curr, dma->tail, dma->head);
++
++ while( p) {
++ printk( "(0x%p 0x%p) ", p, p->id);
++ p = p->next;
++ }
++ printk("\n");
++}
++
++
++/*
++ * DMA processing...
++ */
++
++static inline int start_lh79520_dma(lh79520_dma_t * dma, dma_addr_t dma_ptr, int size)
++{
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ channelRegs_t *regs = dma->regs;
++ int status;
++
++ status = dmaRegs->status;
++
++ /* If the DMA channel is active, there's nothing else we can do. */
++ if( status & (DMAC_ACTIVE0 << dma->channel)) {
++ DPRINTK("start: st %#x busy\n", status);
++ return -EBUSY;
++ }
++
++ /* If there's an interrupt pending, split now
++ * and let it happen.
++ */
++ if( status & (DMAC_INT0 << dma->channel)) {
++ DPRINTK("start: st %#x IRQ pending\n", status);
++ return -EAGAIN;
++ }
++
++ /*
++ * if we're goint to the uda1341, we have to tell the CPLD
++ * to start to send/receive via DMA.
++ */
++ switch( dma->channel) {
++ case 2:
++ cpld->audio_control |= CPLD_DAC_DMA_ENABLE;
++ dmaRegs->mask |= DMAC_INT2;
++ break;
++
++ case 3:
++ cpld->audio_control |= (CPLD_DAC_DMA_ENABLE | CPLD_DAC_USE_REQ1 );
++ dmaRegs->mask |= DMAC_INT3;
++ break;
++ }
++
++ /*
++ * set the source or destination registers, based on which
++ * direction the data's going.
++ */
++ if( dma->direction == DMA_IN) { /* data coming from peripheral */
++ regs->destLow = dma_ptr & 0xffff;
++ regs->destHi = (dma_ptr >> 16 ) & 0xffff;
++ } else { /* data going to peripheral */
++ regs->srcLow = dma_ptr & 0xffff;
++ regs->srcHi = (dma_ptr >> 16 ) & 0xffff;
++ }
++
++ regs->count = size >> 2; /* DDD assumes 4-byte transfer size */
++ regs->control |= DMAC_CTRL_ENABLE;
++
++ DPRINTK("audio_control=0x%x\n", cpld->audio_control);
++ DPRINTK("jif=%d start a=%#x sz=%d st=0x%x dma=0x%p dir=%d\n",
++ jiffies, dma_ptr, size, status, dma, dma->direction);
++ DUMPREGS(regs,dmaRegs);
++
++#if 0
++ {
++ u32 *p = phys_to_virt(dma_ptr);
++ int i;
++
++ for( i=0; i<8; i++)
++ printk( " %08x %08x %08x %08x\n", *p++, *p++, *p++, *p++);
++ }
++#endif // 0
++
++ return 0;
++}
++
++
++static int start_dma(lh79520_dma_t *dma, dma_addr_t dma_ptr, int size)
++{
++ return start_lh79520_dma(dma, dma_ptr, size);
++}
++
++
++/* This must be called with IRQ disabled */
++static void process_dma(lh79520_dma_t * dma)
++{
++ dma_buf_t *buf;
++ int chunksize;
++
++ DUMPQ(dma);
++
++ for (;;) {
++ buf = dma->tail;
++
++ if (!buf || dma->stopped) {
++ /* no more data available */
++ DPRINTK("process: no more buf (dma %s) buf=0x%p stopped=%d\n",
++ dma->curr ? "active" : "inactive", buf, dma->stopped);
++ /*
++ * Some devices may require DMA still sending data
++ * at any time for clock reference, etc.
++ * Note: if there is still a data buffer being
++ * processed then the ref count is negative. This
++ * allows for the DMA termination to be accounted in
++ * the proper order.
++ */
++ if (dma->spin_size && dma->spin_ref >= 0) {
++ chunksize = dma->spin_size;
++ if (chunksize > MAX_DMA_SIZE)
++ chunksize = (1 << MAX_DMA_ORDER);
++ while (start_dma(dma, dma->spin_addr, chunksize) == 0)
++ dma->spin_ref++;
++ if (dma->curr != NULL)
++ dma->spin_ref = -dma->spin_ref;
++ }
++ break;
++ }
++
++ /*
++ * Let's try to start DMA on the current buffer.
++ * If DMA is busy then we break here.
++ */
++ chunksize = buf->size;
++ if (chunksize > MAX_DMA_SIZE)
++ chunksize = (1 << MAX_DMA_ORDER);
++
++ DPRINTK("process: bid=%#x s=%d\n", (int) buf->id, buf->size);
++ if (start_dma(dma, buf->dma_ptr, chunksize) != 0)
++ break;
++
++ if (!dma->curr) {
++ dma->curr = buf;
++ DPRINTK("process: set curr %#p\n", dma->curr);
++ }
++
++ buf->ref++;
++ buf->dma_ptr += chunksize;
++ buf->size -= chunksize;
++ if (buf->size == 0) {
++ /* current buffer is done: move tail to the next one */
++ dma->tail = buf->next;
++ DPRINTK("process: set tail b=%#x\n", (int) dma->tail);
++ }
++ }
++
++ DUMPQ(dma);
++}
++
++
++/* This must be called with IRQ disabled */
++void lh79520_dma_done (lh79520_dma_t *dma)
++{
++ dma_buf_t *buf = dma->curr;
++
++ if (dma->spin_ref > 0) {
++ dma->spin_ref--;
++ } else if (buf) {
++ buf->ref--;
++ if (buf->ref == 0 && buf->size == 0) {
++ /*
++ * Current buffer is done.
++ * Move current reference to the next one and send
++ * the processed buffer to the callback function,
++ * then discard it.
++ */
++ DPRINTK("IRQ: buf done set curr=%#p\n", buf->next);
++ dma->curr = buf->next;
++ if (dma->curr == NULL)
++ dma->spin_ref = -dma->spin_ref;
++ if (dma->head == buf)
++ dma->head = NULL;
++ if (dma->callback) {
++ int size = buf->dma_ptr - buf->dma_start;
++ dma->callback(buf->id, size);
++ }
++ kfree(buf);
++ }
++ }
++
++ process_dma(dma);
++}
++
++
++static void dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ lh79520_dma_t *dma = (lh79520_dma_t *) dev_id;
++ int status = dmaRegs->status;
++
++ DPRINTK("jif=%d IRQ: irq=%d regs=0x%x bid=%#x st=%#x, dma=0x%p\n",
++ jiffies, irq, (u32)dma->regs, (int) dma->curr->id, status, dma);
++
++ if (status & (DMAC_ERROR)) {
++ printk(KERN_ERR "DMA on \"%s\" caused an error\n", dma->device_id);
++ dmaRegs->clear = DMAC_ERROR;
++ }
++
++ dmaRegs->clear = status & DMAC_DONE;
++
++ if (status & DMAC_DONE)
++ lh79520_dma_done (dma);
++}
++
++
++/*
++ * DMA interface functions
++ */
++
++static spinlock_t dma_list_lock;
++
++int lh79520_request_dma (dmach_t * channel, const char *device_id, dma_device_t device)
++{
++ lh79520_dma_t *dma = NULL;
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ channelRegs_t *regs;
++ int i, err;
++
++ /* DMA address (physical) of audio device */
++ void *cpldAudioAddr = (void *) &((cpldRegs_t *)CPLD_START)->adc_dac_left;
++
++
++#ifdef DEBUG
++ printk( __FUNCTION__ "(channel=0x%x, device_id=0x%x device=0x%x)\n",
++ (u32)channel, (u32)device_id, device);
++#endif
++
++ *channel = -1; /* to be sure we catch the freeing of a misregistered channel */
++
++ err = 0;
++ spin_lock(&dma_list_lock);
++
++ /*
++ * Allocate a channel. On the lh79520, channels 0 and 1
++ * are dedicated to the SSP. Channels 2 and 3 are general purpose,
++ * but channel 3 can only be used for audio if the rework described
++ * in the User's Guide has been performed.
++ */
++ switch( device) {
++ case DMA_Audio_Out:
++ dma = &dma_chan[2];
++ regs = dma->regs;
++
++ dma->direction = DMA_OUT;
++
++ regs->destLow = (u32)cpldAudioAddr & 0xffff;
++ regs->destHi = ((u32)cpldAudioAddr >> 16) & 0xffff;
++ regs->control = DMAC_CTRL_SOINC |
++ DMAC_CTRL_SOSIZE_4BYTE |
++ DMAC_CTRL_DESIZE_4BYTE |
++ DMAC_CTRL_SOBURST_SINGLE |
++ DMAC_CTRL_ADDR_MODE_WRAP |
++ DMAC_CTRL_PERIPH_DEST;
++ break;
++
++ case DMA_Audio_In:
++ dma = &dma_chan[3];
++ regs = dma->regs;
++
++ dma->direction = DMA_IN;
++
++ regs->srcLow = (u32)cpldAudioAddr & 0xffff;
++ regs->srcHi = ((u32)cpldAudioAddr >> 16) & 0xffff;
++ regs->control = DMAC_CTRL_SOINC |
++ DMAC_CTRL_SOSIZE_4BYTE |
++ DMAC_CTRL_DESIZE_4BYTE |
++ DMAC_CTRL_SOBURST_SINGLE |
++ DMAC_CTRL_ADDR_MODE_WRAP |
++ DMAC_CTRL_PERIPH_SOURCE;
++ break;
++
++ case DMA_SSP_Rx: /* not supported */
++ case DMA_SSP_Tx: /* not supported */
++ default:
++ err = -ENOSR;
++ break;
++ }
++
++ if (!err) {
++ if (dma)
++ dma->in_use = 1;
++ else
++ err = -ENOSR;
++ }
++ spin_unlock(&dma_list_lock);
++ if (err)
++ return err;
++
++ err = request_irq(dma->irq, dma_irq_handler, SA_INTERRUPT,
++ device_id, (void *) dma);
++ if (err) {
++ printk(KERN_ERR
++ "%s: unable to request IRQ %d for DMA channel. error=0x%x\n",
++ device_id, dma->irq, err);
++ return err;
++ }
++
++ *channel = dma - dma_chan;
++ dma->device_id = device_id;
++ dma->device = device;
++ dma->callback = NULL;
++ dma->spin_size = 0;
++
++ regs = dma->regs;
++
++ DPRINTK( "channel=%d regs=0x%x\n", *channel, (u32)regs);
++ DPRINTK("requested\n");
++
++ return 0;
++}
++
++
++int lh79520_dma_set_callback(dmach_t channel, dma_callback_t cb)
++{
++ lh79520_dma_t *dma = &dma_chan[channel];
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ dma->callback = cb;
++ DPRINTK("cb = %p\n", cb);
++ return 0;
++}
++
++
++int lh79520_dma_set_spin(dmach_t channel, dma_addr_t addr, int size)
++{
++ lh79520_dma_t *dma = &dma_chan[channel];
++ int flags;
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ DPRINTK("set spin %d at %#x\n", size, addr);
++ local_irq_save(flags);
++ dma->spin_addr = addr;
++ dma->spin_size = size;
++ if (size)
++ process_dma(dma);
++
++ local_irq_restore(flags);
++ return 0;
++}
++
++
++int lh79520_dma_queue_buffer(dmach_t channel, void *buf_id,
++ dma_addr_t data, int size)
++{
++ lh79520_dma_t *dma;
++ dma_buf_t *buf;
++ int flags;
++
++ dma = &dma_chan[channel];
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
++ if (!buf)
++ return -ENOMEM;
++
++ buf->next = NULL;
++ buf->ref = 0;
++ buf->dma_ptr = buf->dma_start = data;
++ buf->size = size;
++ buf->id = buf_id;
++
++ local_irq_save(flags);
++
++ DPRINTK("queueing bid=%#x a=%#x s=%d\n", (int) buf_id, data, size);
++
++ if (dma->head)
++ dma->head->next = buf;
++
++ dma->head = buf;
++ if (!dma->tail)
++ dma->tail = buf;
++
++ process_dma(dma);
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++
++int lh79520_dma_get_current(dmach_t channel, void **buf_id, dma_addr_t *addr)
++{
++ int flags, ret;
++ lh79520_dma_t *dma = &dma_chan[channel];
++ channelRegs_t *regs;
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ regs = dma->regs;
++ local_irq_save(flags);
++ if (dma->curr && dma->spin_ref <= 0) {
++ dma_buf_t *buf = dma->curr;
++
++ /*
++ * If we got here, that's because there is, or recently was, a
++ * buffer being processed. Two possibilities: either we are
++ * in the middle of a buffer, or the DMA controller just
++ * switched to the next toggle but the interrupt hasn't been
++ * serviced yet. The former case is straight forward. In
++ * the later case, we'll do like if DMA is just at the end
++ * of the previous toggle since all registers haven't been
++ * reset yet. This goes around the edge case and since we're
++ * always a little behind anyways it shouldn't make a big
++ * difference. If DMA has been stopped prior calling this
++ * then the position is always exact.
++ */
++ if (buf_id)
++ *buf_id = buf->id;
++
++ if( dma->direction == DMA_IN)
++ *addr = (regs->currDstHi << 16 ) | (regs->currDstLow);
++ else
++ *addr = (regs->currSrcHi << 16 ) | (regs->currSrcLow);
++
++ /*
++ * Clamp funky pointers sometimes returned by the hardware
++ * on completed DMA transfers
++ */
++ if (*addr < buf->dma_start ||
++ *addr > buf->dma_ptr)
++ *addr = buf->dma_ptr;
++ DPRINTK("curr_pos: b=%#x a=%#x\n", (int)dma->curr->id, *addr);
++ ret = 0;
++ } else if (dma->tail && dma->stopped) {
++ dma_buf_t *buf = dma->tail;
++ if (buf_id)
++ *buf_id = buf->id;
++ *addr = buf->dma_ptr;
++ ret = 0;
++ } else {
++ if (buf_id)
++ *buf_id = NULL;
++ *addr = 0;
++ ret = -ENXIO;
++ }
++ local_irq_restore(flags);
++ return ret;
++}
++
++
++int lh79520_dma_stop(dmach_t channel)
++{
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ lh79520_dma_t *dma = &dma_chan[channel];
++ int flags;
++
++ DPRINTK( "lh79520_dma_stop channel=%d\n", channel);
++
++ if (dma->stopped)
++ return 0;
++
++ local_irq_save(flags);
++ dma->stopped = 1;
++
++ /*
++ * Stop DMA and tweak state variables so everything could restart
++ * from there when resume/wakeup occurs.
++ */
++ dma->regs->control &= ~DMAC_CTRL_ENABLE;
++ dmaRegs->mask &= ~((DMAC_INT0 << channel) | (DMAC_ERRINT0 << channel));
++
++ if (dma->curr) {
++ dma_buf_t *buf = dma->curr;
++ if (dma->spin_ref <= 0) {
++ dma_addr_t curpos;
++ lh79520_dma_get_current(channel, NULL, &curpos);
++ buf->size += buf->dma_ptr - curpos;
++ buf->dma_ptr = curpos;
++ }
++ buf->ref = 0;
++ dma->tail = buf;
++ dma->curr = NULL;
++ }
++ dma->spin_ref = 0;
++ process_dma(dma);
++ local_irq_restore(flags);
++ return 0;
++}
++
++
++int lh79520_dma_resume(dmach_t channel)
++{
++ lh79520_dma_t *dma = &dma_chan[channel];
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ if (dma->stopped) {
++ int flags;
++ save_flags_cli(flags);
++ dma->stopped = 0;
++ dma->spin_ref = 0;
++ process_dma(dma);
++ restore_flags(flags);
++ }
++ return 0;
++}
++
++
++int lh79520_dma_flush_all(dmach_t channel)
++{
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ lh79520_dma_t *dma = &dma_chan[channel];
++ dma_buf_t *buf, *next_buf;
++ int flags;
++
++ DPRINTK("dma_flush_all channel=%d\n", channel);
++ DUMPQ(dma);
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ local_irq_save(flags);
++
++ /*
++ * Disable the channel, and mask off its interrupts
++ */
++ dma->regs->control &= ~(DMAC_CTRL_ENABLE);
++ dmaRegs->mask &= ~((DMAC_INT0 << channel) | (DMAC_ERRINT0 << channel));
++
++ buf = dma->curr;
++ if (!buf)
++ buf = dma->tail;
++
++ dma->head = dma->tail = dma->curr = NULL;
++ dma->stopped = 0;
++ dma->spin_ref = 0;
++ process_dma(dma);
++ local_irq_restore(flags);
++
++ while (buf) {
++ next_buf = buf->next;
++ kfree(buf);
++ buf = next_buf;
++ }
++ DPRINTK("flushed\n");
++ return 0;
++}
++
++
++void lh79520_free_dma(dmach_t channel)
++{
++ lh79520_dma_t *dma;
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS)
++ return;
++
++ dma = &dma_chan[channel];
++ if (!dma->in_use) {
++ printk(KERN_ERR "Trying to free free DMA%d\n", channel);
++ return;
++ }
++
++ lh79520_dma_set_spin(channel, 0, 0);
++ lh79520_dma_flush_all(channel);
++
++ free_irq(dma->irq, (void *) dma);
++ dma->in_use = 0;
++
++ DPRINTK("freed\n");
++}
++
++
++EXPORT_SYMBOL(lh79520_request_dma);
++EXPORT_SYMBOL(lh79520_dma_set_callback);
++EXPORT_SYMBOL(lh79520_dma_set_spin);
++EXPORT_SYMBOL(lh79520_dma_queue_buffer);
++EXPORT_SYMBOL(lh79520_dma_get_current);
++EXPORT_SYMBOL(lh79520_dma_stop);
++EXPORT_SYMBOL(lh79520_dma_resume);
++EXPORT_SYMBOL(lh79520_dma_flush_all);
++EXPORT_SYMBOL(lh79520_free_dma);
++
++
++#ifdef CONFIG_PM
++/* Drivers should call this from their PM callback function */
++
++int lh79520_dma_sleep(dmach_t channel)
++{
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ lh79520_dma_t *dma = &dma_chan[channel];
++ int orig_state;
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ orig_state = dma->stopped;
++ lh79520_dma_stop(channel);
++ dma->regs->control &= ~DMAC_CTRL_ENABLE;
++ dmaRegs->mask &= ~((DMAC_INT0 << channel) | (DMAC_ERRINT0 << channel));
++
++ dma->stopped = orig_state;
++ dma->spin_ref = 0;
++ return 0;
++}
++
++int lh79520_dma_wakeup(dmach_t channel)
++{
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ lh79520_dma_t *dma = &dma_chan[channel];
++ int flags;
++
++ if ((unsigned)channel >= LH79520_DMA_CHANNELS || !dma->in_use)
++ return -EINVAL;
++
++ dma->regs->control &= ~DMAC_CTRL_ENABLE;
++ dmaRegs->mask &= ~((DMAC_INT0 << channel) | (DMAC_ERRINT0 << channel));
++
++ local_irq_save(flags);
++ process_dma(dma);
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++EXPORT_SYMBOL(lh79520_dma_sleep);
++EXPORT_SYMBOL(lh79520_dma_wakeup);
++
++#endif /* CONFIG_PM */
++
++
++static int __init lh79520_init_dma(void)
++{
++ int channel;
++ dmaRegs_t *dmaRegs = (dmaRegs_t *)IO_ADDRESS(DMAC_PHYS);
++ ioconRegs_t *ioconRegs = (ioconRegs_t *)IO_ADDRESS( IOCON_PHYS);
++ channelRegs_t *regs;
++
++#ifdef DEBUG
++ printk( __FUNCTION__ "\n");
++#endif
++
++ dmaRegs->clear = DMAC_CLEAR_ALL;
++ dmaRegs->mask = 0;
++
++ for (channel = 0; channel < LH79520_DMA_CHANNELS; channel++) {
++ dma_chan[channel].regs = regs = streamRegs[channel];
++
++ regs->control = 0;
++ regs->count = 0;
++ regs->srcHi = 0;
++ regs->srcLow = 0;
++ regs->destHi = 0;
++ regs->destLow = 0;
++
++ dma_chan[channel].irq = IRQ_DMA;
++ dma_chan[channel].channel = channel;
++
++#ifdef DEBUG
++ printk( "dma channel %d at 0x%x\n", channel, (u32)regs);
++#endif
++ }
++
++ /* assign pins to DMA stream 2 */
++ ioconRegs->DMAMux |= (DMAMUX_DCDEOT0 | DMAMUX_DCDREQ0) ;
++
++ /* assign pins to DMA Stream 3 */
++ // These two lines interfere with PWM Audio
++ // ioconRegs->MiscMux |= MISCMUX_DCDEOT1;
++ // ioconRegs->MiscMux &= ~MISCMUX_RCEII5;
++
++ return 0;
++}
++
++__initcall(lh79520_init_dma);
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/dma.h linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/dma.h
+--- linux-2.4.26/arch/arm/mach-lh79520/dma.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/dma.h 2005-11-02 17:38:44.000000000 -0400
+@@ -0,0 +1,61 @@
++/*
++ * arch/arm/mach-lh79520/dma.h
++ * Copyright (C) 2002 Embedix, Inc.
++ *
++ * Based on arch/arm/mach-sa1100/dma.h which is
++ * (C) 2000 Nicolas Pitre <nico@cam.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/config.h>
++
++/*
++ * DMA buffer structure
++ */
++
++typedef struct dma_buf_s {
++ int size; /* buffer size */
++ dma_addr_t dma_start; /* starting DMA address */
++ dma_addr_t dma_ptr; /* next DMA pointer to use */
++ int ref; /* number of DMA references */
++ void *id; /* to identify buffer from outside */
++ struct dma_buf_s *next; /* next buffer to process */
++} dma_buf_t;
++
++typedef enum {
++ DMA_OUT,
++ DMA_IN
++} dma_direction_t;
++
++/*
++ * DMA channel structure.
++ */
++typedef struct {
++ unsigned int in_use; /* Device is allocated */
++ const char *device_id; /* Device name */
++ dma_device_t device; /* ... to which this channel is attached */
++ dma_buf_t *head; /* where to insert buffers */
++ dma_buf_t *tail; /* where to remove buffers */
++ dma_buf_t *curr; /* buffer currently DMA'ed */
++ int stopped; /* 1 if DMA is stalled */
++ channelRegs_t *regs; /* points to appropriate DMA registers */
++ int irq; /* IRQ used by the channel */
++ dma_callback_t callback; /* ... to call when buffers are done */
++ int spin_size; /* > 0 when DMA should spin when no more buffer */
++ dma_addr_t spin_addr; /* DMA address to spin onto */
++ int spin_ref; /* number of spinning references */
++ int channel; /* channel number */
++ dma_direction_t direction; /* DMA direction: 0=Out / 1=In */
++} lh79520_dma_t;
++
++extern lh79520_dma_t dma_chan[LH79520_DMA_CHANNELS];
++
++
++void lh79520_dma_done( lh79520_dma_t *dma);
++
++
++
++
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/generic.c linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/generic.c
+--- linux-2.4.26/arch/arm/mach-lh79520/generic.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/generic.c 2005-11-02 17:38:09.000000000 -0400
+@@ -0,0 +1,71 @@
++/*
++ * linux/arch/arm/mach-lh79520/generic.c
++ *
++ * Common code for all LH79520 based machines.
++ *
++ * Copyright (C) 2001 Lineo, Inc
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++
++#include <asm/mach/arch.h>
++#include <asm/arch/rcpc.h>
++
++
++/*
++ * return the CPU clock frequency (FCLK) in Hz.
++ */
++unsigned int
++cpufreq_get( int cpu)
++{
++ int divider;
++ rcpcRegs_t *RCPC = (rcpcRegs_t *)IO_ADDRESS(RCPC_PHYS);
++
++ divider = RCPC->CpuClkPrescale * 2;
++ if( divider == 0)
++ divider = 1;
++ return PLL_CLOCK / divider;;
++}
++EXPORT_SYMBOL(cpufreq_get);
++
++
++/*
++ * return the bus clock frequency (HCLK) in Hz.
++ */
++unsigned int
++hclkfreq_get( void)
++{
++ int divider;
++ rcpcRegs_t *RCPC = (rcpcRegs_t *)IO_ADDRESS(RCPC_PHYS);
++
++ divider = RCPC->HCLKPrescale * 2; /* HCLK prescale value */
++
++ if( divider == 0) /* no prescalar == divide by 1 */
++ divider = 1;
++
++ return PLL_CLOCK / divider;
++}
++
++
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/generic.h linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/generic.h
+--- linux-2.4.26/arch/arm/mach-lh79520/generic.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/generic.h 2005-11-02 17:38:09.000000000 -0400
+@@ -0,0 +1,24 @@
++/*
++ * linux/arch/arm/mach-lh79520/generic.h
++ *
++ * Common code for all LH79520 based machines.
++ *
++ * Copyright (C) 2001 Lineo, Inc
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++unsigned int cpufreq_get( int cpu);
++unsigned int hclkfreq_get( void);
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/Makefile linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/Makefile
+--- linux-2.4.26/arch/arm/mach-lh79520/Makefile 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/Makefile 2005-11-02 17:38:09.000000000 -0400
+@@ -0,0 +1,24 @@
++#
++# Makefile for the linux kernel.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++
++USE_STANDARD_AS_RULE := true
++
++O_TARGET := lh79520.o
++
++# Object file lists.
++
++obj-y := arch.o mm.o generic.o dma.o
++obj-m :=
++obj-n :=
++obj- :=
++
++export-objs := generic.o dma.o
++
++# obj-$(CONFIG_LEDS) += leds.o
++# obj-$(CONFIG_PCI) += pci_v3.o pci.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux-2.4.26/arch/arm/mach-lh79520/mm.c linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/mm.c
+--- linux-2.4.26/arch/arm/mach-lh79520/mm.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/mach-lh79520/mm.c 2005-11-02 17:38:09.000000000 -0400
+@@ -0,0 +1,38 @@
++/*
++ * linux/arch/arm/mach-lh79520/mm.c
++ *
++ * Copyright (C) 2001 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/init.h>
++
++#include <asm/pgtable.h>
++#include <asm/page.h>
++#include <asm/io.h>
++
++#include <asm/mach/map.h>
++
++static struct map_desc lh79520_io_desc[] __initdata = {
++ /* virt phys size r w c b */
++ { FLASH_BASE, FLASH_START, FLASH_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { CPLD_BASE, CPLD_START, CPLD_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { CS8900_BASE, CS8900_START, CS8900_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { IDE_BASE, IDE_START, IDE_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { IDE2_BASE, IDE2_START, IDE2_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { INT_SRAM_BASE, INT_SRAM_START, INT_SRAM_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { APB_BASE, APB_START, APB_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { AHB_BASE, AHB_START, AHB_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ { VIC_BASE, VIC_START, VIC_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
++ LAST_DESC
++};
++
++void __init lh79520_map_io(void)
++{
++ iotable_init( lh79520_io_desc);
++}
++
+diff -urN linux-2.4.26/arch/arm/Makefile linux-2.4.26-vrs1-lnode80/arch/arm/Makefile
+--- linux-2.4.26/arch/arm/Makefile 2005-11-02 16:54:16.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/Makefile 2005-11-02 17:37:31.000000000 -0400
+@@ -160,6 +160,16 @@
+ MACHINE = anakin
+ endif
+
++ifeq ($(CONFIG_ARCH_LH79520),y)
++# C0008000 is the default, so not needed -- DDD
++# DDD TEXTADDR = 0xC0008000
++MACHINE = lh79520
++endif
++
++ifeq ($(CONFIG_ARCH_LH7A400),y)
++MACHINE = lh7a400
++endif
++
+ ifeq ($(CONFIG_ARCH_OMAHA),y)
+ MACHINE = omaha
+ endif
+diff -urN linux-2.4.26/arch/arm/tools/mach-types linux-2.4.26-vrs1-lnode80/arch/arm/tools/mach-types
+--- linux-2.4.26/arch/arm/tools/mach-types 2005-11-02 16:54:18.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/arch/arm/tools/mach-types 2005-11-02 17:37:31.000000000 -0400
+@@ -525,3 +525,5 @@
+ omap_osk MACH_OMAP_OSK OMAP_OSK 515
+ rg100v3 MACH_RG100V3 RG100V3 516
+ mx2ads MACH_MX2ADS MX2ADS 517
++lh79520evb LH79520_EVB LH79520EVB 999
++lh7a400evb LH7A400_EVB LH7A400EVB 998
+diff -urN linux-2.4.26/Documentation/Configure.help linux-2.4.26-vrs1-lnode80/Documentation/Configure.help
+--- linux-2.4.26/Documentation/Configure.help 2005-11-02 16:54:16.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/Documentation/Configure.help 2005-11-02 17:37:31.000000000 -0400
+@@ -25531,6 +25531,136 @@
+ a debugging option; you probably do not want to set it unless you
+ are an S390 port maintainer.
+
++Sharp LH79520 based bords
++CONFIG_ARCH_LH79520
++ Say Y here to support the Sharp LH79520 System on Chip.
++
++Sharp LH79520 Evaluation Board (Isis)
++CONFIG_LH79520_EVB
++ Say Y here to support the Sharp LH79520 Evaluation Board.
++
++Sharp LH79520 Watchdog Timer
++CONFIG_LH79520_WATCHDOG
++ Say Y here to include support for the LH79520 watchdog timer.
++ The watchdog timer will reboot your system when the timeout is reached.
++ Note that once enabled, this timer cannot be disabled.
++
++ This driver is also available as a module ( = code which can be
++ inserted in and removed from the running kernel whenever you want).
++ If you want to compile it as a module, say M here and read
++ Documentation/modules.txt. The module will be called lh79520_wdt.o.
++
++ If unsure, say N.
++
++Sharp LH79520 PWM controller
++CONFIG_LH79520_PWM
++ Say Y here to include support for the PWM device.
++ PWM0 is for the LCD backlight intensity, and
++ PWM1 is for audio. The major number is dynamically assigned unless
++ module parameter is provided. Device nodes must exist to control
++ the ioctls.
++ /dev/pwm0 c 254 0
++ /dev/pwm1 c 254 1
++ 254 may or may not be the major number for your driver.
++ Check /proc/devices for major number of pwm520.
++
++ If unsure, say N.
++
++Sharp LH79520 7-segment display
++CONFIG_7SEGMENT_LH79520
++ Say Y here to include support for the LH79520 7-segment display.
++
++ If unsure, say N.
++
++Sharp LH79520 Touchscreen
++CONFIG_TOUCHSCREEN_LH79520
++ Say Y here to include support for the LH79520 touchscreen.
++
++ If unsure, say N.
++
++Sharp LH79520 LCD EEPROM
++CONFIG_EEPROM_LH79520
++ Say Y here to include support for the EEPROM on the LCD
++ board on the Sharp LH79520 EVB.
++
++ If unsure, say N.
++
++ARM PrimeCell PL011 UART
++CONFIG_SERIAL_AMBA_PL011
++ Say Y here to include support for the ARM PrimeCell PL011 UART.
++
++ If unsure, say N.
++
++Console on ARM PL011 UART
++CONFIG_SERIAL_AMBA_PL011_CONSOLE
++ Say Y here to support a serial console on an ARM PrimeCell PL011 UART.
++
++ If unsure, say N.
++
++ARM PrimeCell PL110 LCD Controller
++CONFIG_FB_PL110
++ Say Y here to include support the ARM PrimeCell PL110
++ LCD controller.
++
++ If unsure, say N.
++
++Sharp LQ039Q2DS53-HR-TFT LCD panel
++CONFIG_PL110_LQ39
++ Say Y here to if you've got a Sharp LQ039Q2DS53-HR-TFT
++ LCD panel connected to an ARM PL110 LCD controller.
++
++ If unsure, say N.
++
++Sharp LM057QCTT03-QVGA-STN LCD panel
++CONFIG_PL110_LM57
++ Say Y here to if you've got a Sharp LM057QCTT03-QVGA-STN
++ LCD panel connected to an ARM PL110 LCD controller.
++
++ If unsure, say N.
++
++Sharp LQ057Q3DC02-VGA/QVGA-TFT LCD panel
++CONFIG_PL110_LQ57
++ Say Y here to if you've got a Sharp LQ057Q3DC02-VGA/QVGA-TFT
++ LCD panel connected to an ARM PL110 LCD controller.
++
++ If unsure, say N
++
++Sharp LQ121S1DG31-800x600-TFT LCD panel
++CONFIG_PL110_LQ121
++ Say Y here to if you've got a Sharp LQ121S1DG31-800x600-TFT
++ LCD panel connected to an ARM PL110 LCD controller.
++
++ If unsure, say N
++
++Sharp LQ104V1DG11-640x480-TFT LCD panel
++CONFIG_PL110_LQ104
++ Say Y here to if you've got a Sharp LQ104V1DG11-640x480-TFT
++ LCD panel connected to an ARM PL110 LCD controller.
++
++ If unsure, say N
++
++Sharp LH7A400 based bords
++CONFIG_ARCH_LH7A400
++ Say Y here to support the Sharp LH7A400 System on Chip.
++
++Sharp LH7A400 Evaluation Board (Aruba)
++CONFIG_LH7A400_EVB
++ Say Y here to support the Sharp LH7A400 SoC Evaluation Board.
++
++Sharp LH7A400 UART
++CONFIG_SERIAL_LH7A400
++ Say Y here to include support for the UART on the Sharp
++ LH7A400 SoC.
++
++ If unsure, say N.
++
++Console on a Sharp LH7A400 Serial port
++CONFIG_SERIAL_LH7A400_CONSOLE
++ Say Y here to support a serial console on the
++ Sharp LH7A400 SoC Serial port.
++
++ If unsure, say N.
++
+ #
+ # ARM options
+ #
+diff -urN linux-2.4.26/drivers/char/Config.in linux-2.4.26-vrs1-lnode80/drivers/char/Config.in
+--- linux-2.4.26/drivers/char/Config.in 2005-11-02 16:54:20.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/Config.in 2005-11-02 17:37:31.000000000 -0400
+@@ -253,6 +253,7 @@
+ dep_tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG $CONFIG_FOOTBRIDGE
+ dep_tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG $CONFIG_ARCH_NETWINDER
+ dep_tristate ' SA1100 watchdog' CONFIG_SA1100_WATCHDOG $CONFIG_ARCH_SA1100
++ dep_tristate ' Sharp LH79520 watchdog' CONFIG_LH79520_WATCHDOG $CONFIG_ARCH_LH79520
+ dep_tristate ' EPXA watchdog' CONFIG_EPXA_WATCHDOG $CONFIG_ARCH_CAMELOT
+ dep_tristate ' Omaha watchdog' CONFIG_OMAHA_WATCHDOG $CONFIG_ARCH_OMAHA
+ dep_tristate ' AT91RM9200 watchdog' CONFIG_AT91_WATCHDOG $CONFIG_ARCH_AT91RM9200
+@@ -304,6 +305,11 @@
+ if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
+ dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
+ fi
++
++if [ "$CONFIG_ARCH_LH79520" = "y" ]; then
++ tristate 'LH79520 PWM support' CONFIG_LH79520_PWM
++fi
++
+ if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
+ dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
+ fi
+diff -urN linux-2.4.26/drivers/char/console.c linux-2.4.26-vrs1-lnode80/drivers/char/console.c
+--- linux-2.4.26/drivers/char/console.c 2005-11-02 16:54:20.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/console.c 2005-11-02 17:37:31.000000000 -0400
+@@ -169,7 +169,7 @@
+ int console_blanked;
+
+ static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
+-static int blankinterval = 10*60*HZ;
++static int blankinterval = 0; // 10*60*HZ;
+ static int vesa_off_interval;
+
+ static struct tq_struct console_callback_tq = {
+diff -urN linux-2.4.26/drivers/char/cradle.c linux-2.4.26-vrs1-lnode80/drivers/char/cradle.c
+--- linux-2.4.26/drivers/char/cradle.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/cradle.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,486 @@
++/*
++** cradle.c
++**
++** Device driver for the cradle interface on the Touchblock device.
++**
++** Copyright (C) 2002 The PTR Group, Inc. <www.theptrgroup.com>
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** This program is distributed in the hope that it will be useful,
++** but WITHOUT ANY WARRANTY; without even the implied warranty of
++** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++** GNU General Public License for more details.
++**
++** You should have received a copy of the GNU General Public License
++** along with this program; if not, write to the Free Software
++** Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++**
++*/
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/signal.h>
++#include <linux/errno.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/poll.h>
++#include <linux/miscdevice.h>
++#include <linux/random.h>
++#include <linux/init.h>
++#include <asm/system.h>
++#include <asm/hardware.h>
++#include <asm/arch/iocon.h>
++#include <asm/arch/gpio.h>
++#include <asm/hardware/cradle.h>
++
++static ssize_t cradle_read(struct file *filp, char *buf, size_t count, loff_t *f_pos);
++static int cradle_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg);
++static int cradle_open(struct inode *inode, struct file *filp);
++static int cradle_release(struct inode *inode, struct file *filp);
++static int cradle_fasync(int fd, struct file *filp, int mode );
++static unsigned int cradle_poll(struct file *filp, poll_table *wait);
++
++
++static char read_docking_state(void);
++static inline void cradle_update_buffer(volatile char **index, int delta, char *buf, int size);
++
++#if 0
++void cradle_do_tasklet_docked(unsigned long data);
++DECLARE_TASKLET( cradle_tasklet_docked, cradle_do_tasklet_docked,0);
++void cradle_do_tasklet_undocked(unsigned long data);
++DECLARE_TASKLET( cradle_tasklet_undocked, cradle_do_tasklet_undocked,0);
++#endif
++
++//#define min(a,b) (((a)<(b))?(a):(b))
++
++#define CRADLE_IBUF_SIZE 2
++
++typedef struct
++{
++ int users;
++ int ready;
++ volatile char *ibuf_wp;
++ volatile char *ibuf_rp;
++ char *ibuf;
++ wait_queue_head_t wait_inq;
++ struct fasync_struct *fasync; /* asynchronous readers */
++} cradle_dev_t;
++
++static cradle_dev_t cradle_dev;
++
++struct file_operations cradle_fops = {
++// NULL, // seek
++read: cradle_read, // read
++// NULL, // write
++// NULL, // readdir
++poll: cradle_poll, // poll/select
++ioctl: cradle_ioctl, // ioctl
++// NULL, // mmap
++open: cradle_open, // open
++// NULL, // flush
++release: cradle_release, // release
++// NULL, // fsync
++fasync: cradle_fasync, // fasync
++};
++
++/************************************************************************
++** Read the docking state from the hardware
++************************************************************************/
++static char read_docking_state(void)
++{
++
++ return( (GPIOG->dr & 0x10) ? CRADLE_UNDOCKED_STATE : CRADLE_DOCKED_STATE );
++}
++
++/************************************************************************
++** Manipulate the buffer pointers safely without using locks
++************************************************************************/
++static inline void cradle_update_buffer(volatile char **index, int delta, char *buf, int size)
++{
++ volatile char *new = *index + delta;
++ barrier();
++ *index=(new >= (buf+size)) ? buf : new;
++}
++
++
++#if 0
++/************************************************************************
++** Enable the interrupt(s) associated with the cradle
++************************************************************************/
++static void cradle_enable_interrupt(void)
++{
++ /* printk(KERN_INFO "cradle: interrupts enabled\n"); */
++}
++
++/************************************************************************
++** Disable the interrupt(s) associated with the cradle
++************************************************************************/
++static void cradle_disable_interrupt(void)
++{
++ /* printk(KERN_INFO "cradle: interrupts disabled\n"); */
++}
++
++/************************************************************************
++**
++************************************************************************/
++static void cradle_docked_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ cradle_dev_t *dev=dev_id;
++
++ /* printk(KERN_INFO "cradle: docked irq\n"); */
++
++ /* Reset the interrupt request */
++
++ /* Get the state */
++ *dev->ibuf_wp=read_docking_state();
++ cradle_update_buffer(&dev->ibuf_wp, 1, dev->ibuf, CRADLE_IBUF_SIZE);
++
++ /* Notify any asynchronous readers */
++ if( dev->fasync )
++ {
++ /* printk(KERN_INFO "cradle: kill_fasync()\n"); */
++ kill_fasync(dev->fasync, SIGIO, POLL_IN);
++ }
++
++ wake_up_interruptible( &dev->wait_inq );
++
++ /* Schedule the bottom-half */
++ /* tasklet_schedule(&cradle_tasklet_docked); */
++}
++
++/************************************************************************
++**
++************************************************************************/
++static void cradle_undocked_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ cradle_dev_t *dev=dev_id;
++
++ /* printk(KERN_INFO "cradle: undocked irq\n"); */
++
++ /* Reset the interrupt request */
++
++ /* Get the state */
++ *dev->ibuf_wp=read_docking_state();
++ cradle_update_buffer(&dev->ibuf_wp, 1, dev->ibuf, CRADLE_IBUF_SIZE);
++
++ /* Notify any asynchronous readers */
++ if( dev->fasync )
++ {
++ /* printk(KERN_INFO "cradle: kill_fasync()\n"); */
++ kill_fasync(dev->fasync, SIGIO, POLL_IN);
++ }
++
++ wake_up_interruptible( &dev->wait_inq );
++
++ /* Schedule the bottom-half */
++ /* tasklet_schedule(&cradle_tasklet_undocked); */
++}
++
++/*************************************************************************
++** Bottom-half processing
++*************************************************************************/
++void cradle_do_tasklet_docked(unsigned long data)
++{
++ printk(KERN_INFO "cradle: tasklet\n");
++}
++
++
++/*************************************************************************
++** Bottom-half processing
++*************************************************************************/
++void cradle_do_tasklet_undocked(unsigned long data)
++{
++ printk(KERN_INFO "cradle: tasklet undocked\n");
++}
++#endif
++
++/************************************************************************
++** Open the cradle device
++************************************************************************/
++static int cradle_open(struct inode *inode, struct file *filp)
++{
++ cradle_dev_t *dev;
++ int status;
++
++ /* printk(KERN_INFO "cradle: open()\n"); */
++
++ /* Initialize the device information */
++ dev=(cradle_dev_t *)filp->private_data;
++ if(!dev)
++ {
++ dev=&cradle_dev;
++ filp->private_data=dev;
++ }
++
++ if( dev->users++ ) return 0;
++
++ MOD_INC_USE_COUNT;
++
++ /* allocate the buffers */
++ dev->ibuf=(char *)kmalloc(CRADLE_IBUF_SIZE,GFP_KERNEL);
++ if( !dev->ibuf )
++ {
++ MOD_DEC_USE_COUNT;
++ return -ENOMEM;
++ }
++
++ /* clear the buffers */
++ dev->ibuf_wp=dev->ibuf_rp=dev->ibuf;
++
++ /* mark the device ready */
++ dev->ready=1;
++
++ /* Install the interrupt handler(s) */
++
++ /* Enable the interrupts */
++ //cradle_enable_interrupt();
++
++
++ return 0;
++}
++
++/************************************************************************
++** Release the cradle device
++************************************************************************/
++static int cradle_release(struct inode *inode, struct file *filp)
++{
++
++ cradle_dev_t *dev=(cradle_dev_t *)filp->private_data;
++
++ /* printk(KERN_INFO "cradle: release\n"); */
++
++ if( --dev->users ) return 0;
++
++ //cradle_disable_interrupt();
++
++ //free the irq
++
++ /* release any asynchronous readers */
++ cradle_fasync(-1,filp,0);
++
++ /* free up resources */
++ kfree(dev->ibuf);
++
++
++ MOD_DEC_USE_COUNT;
++
++ return 0;
++}
++
++/************************************************************************
++** Read the cradle device
++**
++** This implementation supports both non-blocking and blocking i/o.
++************************************************************************/
++static ssize_t cradle_read(struct file *filp, char *buf, size_t count, loff_t *f_pos)
++{
++ cradle_dev_t *dev=(cradle_dev_t *)filp->private_data;
++ wait_queue_t wait;
++
++ /* printk(KERN_INFO "cradle: read()\n"); */
++
++ /* unseekable device */
++ if( f_pos!=&filp->f_pos )
++ return -ESPIPE;
++
++ /*
++ ** safe implementation of sleeping that avoids race conditions
++ */
++
++ /* init our local wait queue */
++ init_waitqueue_entry(&wait, current);
++
++ /* add out queue to the drivers queue */
++ add_wait_queue(&dev->wait_inq, &wait);
++
++ while( 1 )
++ {
++ /* tell the schedule we are asleep (even though we aren't yet) */
++ set_current_state(TASK_INTERRUPTIBLE);
++
++ /* check for available data */
++ if( dev->ibuf_wp != dev->ibuf_rp )
++ {
++ break;
++ }
++
++ if( filp->f_flags & O_NONBLOCK )
++ {
++ remove_wait_queue(&dev->wait_inq, &wait);
++ set_current_state(TASK_RUNNING);
++ return -EAGAIN;
++ /* return -EWOULDBLOCK; */
++ }
++
++ /* check to see if it is a signal */
++ if( signal_pending(current))
++ {
++ remove_wait_queue(&dev->wait_inq, &wait);
++ set_current_state(TASK_RUNNING);
++ return -ERESTARTSYS;
++ }
++
++ /* allow other processes to run (we'll go to sleep) */
++ schedule();
++ }
++
++ set_current_state(TASK_RUNNING);
++ remove_wait_queue(&dev->wait_inq, &wait);
++
++ /* calculate how much data is available */
++ if( dev->ibuf_wp > dev->ibuf_rp )
++ count=min(count, dev->ibuf_wp - dev->ibuf_rp );
++ else
++ count=min(count, (dev->ibuf+CRADLE_IBUF_SIZE) - dev->ibuf_rp );
++
++ /* printk("cradle: read() %d available\n", count); */
++
++ /* copy the data to user space */
++ if( copy_to_user(buf, dev->ibuf_rp, count) )
++ {
++ return -EFAULT;
++ }
++
++ /* manager the buffer pointers */
++ cradle_update_buffer(&dev->ibuf_rp, count, dev->ibuf, CRADLE_IBUF_SIZE);
++
++
++ return count;
++}
++
++/************************************************************************
++** Poll/select the cradle device
++************************************************************************/
++static unsigned int cradle_poll(struct file *filp, poll_table *wait)
++{
++ cradle_dev_t *dev=filp->private_data;
++ unsigned int mask=0;
++
++ poll_wait(filp, &dev->wait_inq, wait);
++
++ /* check for readable */
++ if( dev->ibuf_wp != dev->ibuf_rp )
++ mask |= POLLIN | POLLRDNORM;
++
++ return mask;
++}
++
++/************************************************************************
++** IOCTL interface for the cradle device
++************************************************************************/
++static int cradle_ioctl(struct inode *inode, struct file *filp,
++ unsigned int cmd, unsigned long arg)
++{
++ int docking_state;
++ int retval=0;
++
++ /* printk(KERN_INFO "cradle: ioct %d\n", cmd); */
++
++ switch(cmd)
++ {
++ case CRADLE_GET_DOCKING_STATE_IOCTL:
++ docking_state=read_docking_state();
++ //this code is here temporarily until
++ // a timer is added to check the state and set
++ // the LED automatically
++ if(docking_state == CRADLE_DOCKED_STATE)
++ {
++ // turn on dock led
++ GPIOF->dr |= 0x40;
++ }
++ else
++ {
++ // turn off dock led
++ GPIOF->dr &= ~0x40;
++ }
++
++ retval=put_user(docking_state, (int *)arg);
++
++ break;
++ default:
++ printk(KERN_INFO "cradle: unknown ioctl %d\n", cmd);
++ retval=-1;
++ break;
++ }
++
++ return retval;
++}
++
++/************************************************************************
++** Aynchronous i/o support for the cradle device
++************************************************************************/
++static int cradle_fasync(int fd, struct file *filp, int on )
++{
++ int retval;
++ cradle_dev_t *dev=filp->private_data;
++
++ /*
++ printk(KERN_INFO "cradle: fasync fd=%d filp=0x%08x mode=%d\n",
++ fd, (unsigned int) filp, on );
++ */
++
++ retval=fasync_helper(fd, filp, on, &dev->fasync);
++ if( retval < 0 )
++ return retval;
++ else
++ return 0;
++}
++
++/************************************************************************
++** Initialize the cradle interface and the hardware associated with the
++** cradle.
++**
++** This configuration is specific to the hardware design for the
++** Touchblock device. Moreover, this configuration *must* match the
++** configuration of the MIPS interrupt handler.
++************************************************************************/
++void cradle_init(void)
++{
++ int retval;
++ int cradle_major = 0;
++
++ /* register the device */
++ retval=register_chrdev( cradle_major, "cradle", &cradle_fops );
++ if( retval < 0 )
++ {
++ printk(KERN_WARNING "cradle: Failed to register device\n");
++ }
++ if (cradle_major == 0)
++ {
++ cradle_major = retval; /* Dynamic Allocation of major number */
++ printk("<4>Cradle Dynamic Major Number %d\n",cradle_major);
++ }
++
++
++ /* initialize the device structure */
++ memset( &cradle_dev, 0, sizeof( cradle_dev_t ) );
++ init_waitqueue_head(&cradle_dev.wait_inq);
++
++
++ /* printk(KERN_INFO "cradle: initalized\n"); */
++}
++
++/************************************************************************
++**
++** Since the cradle device is statically compiled into the kernel this
++** is not really used. However, when the driver switches to loadable
++** modules this should be the basis of the
++** module cleanup routine.
++************************************************************************/
++void cradle_cleanup(void)
++{
++ /* unregister the device */
++ unregister_chrdev( CRADLE_MAJOR, "cradle");
++
++
++ /* printk(KERN_INFO "cradle: cleanup\n"); */
++}
++
++
++module_init(cradle_init);
++module_exit(cradle_cleanup);
+diff -urN linux-2.4.26/drivers/char/lh79520_wdt.c linux-2.4.26-vrs1-lnode80/drivers/char/lh79520_wdt.c
+--- linux-2.4.26/drivers/char/lh79520_wdt.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/lh79520_wdt.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,259 @@
++/*
++ * Watchdog driver for the LH79520
++ *
++ * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
++ * Based on SoftDog driver by Alan Cox <alan@redhat.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
++ * warranty for any of this software. This material is provided
++ * "AS-IS" and at no charge.
++ *
++ * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
++ *
++ * 27/11/2000 Initial release
++ */
++
++#include <linux/module.h>
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/fs.h>
++#include <linux/mm.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/reboot.h>
++#include <linux/smp_lock.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <asm/hardware.h>
++#include <asm/bitops.h>
++
++#include "lh79520_wdt.h"
++
++unsigned int hclkfreq_get( void);
++
++#define TIMER_MARGIN 60 /* default in seconds */
++#ifdef OLDWAY
++#define PCLK 51609600 /* ticks per second of AHB clock, 51MHz */
++#else
++#define PCLK hclkfreq_get()
++#endif
++#define SLEEP_TIME 10 /* number of seconds between each counter reload */
++
++static int lh79520_margin = TIMER_MARGIN; /* in seconds */
++static int lh79520wdt_users; /* mutex */
++#ifdef FIQ_ENABLED
++static int irq = 0x1c; /* FIQ. Normally 0x18 for standard irq */
++#else
++static int irq = 0x18; /* IRQ. Normally the FIQ is 0x1c */
++#endif
++
++#define WDTBase 0xFFFE3000L /* Base Address for all LH79520 Watchdog Registers */
++WDTIMERREGS *wtdregs = (WDTIMERREGS *) WDTBase;
++
++#ifdef MODULE
++MODULE_PARM(lh79520_margin,"i");
++#endif
++
++/*
++ * Allow only one person to hold it open
++ */
++
++static int lh79520dog_open(struct inode *inode, struct file *file)
++{
++ if(test_and_set_bit(1,&lh79520wdt_users))
++ return -EBUSY;
++ MOD_INC_USE_COUNT;
++
++ if ((lh79520_margin > (PCLK / 0xffffffff)) || /* 83 seconds max, 20 sec min margin */
++ (lh79520_margin <= SLEEP_TIME * 2))
++ lh79520_margin = TIMER_MARGIN;
++
++/* setting bits 7-4 of WDCTLR to 0x0 through 0xF sets the *initial* counter value upon a reset */
++/* 0x0 is 2^16 tics of PCLK, or reset immediatly, 0x10 is 2^17 tics of PCLK, ... */
++/* 0xF is 2^31 tics of PCLK, if PCLK is 51 MHz, 2^31 / 51 MHz = 41.6 seconds */
++/* WDCTLR=0xF, the F sets initial counter to 41.6 seconds (assuming PCLK is 51 MHz) */
++/* The counter will be set to the user selected margin the first time a reload occurs */
++ wtdregs->wdctlr |= 0xF0;
++
++ /* Activate LH79520 Watchdog timer */
++ wtdregs->wdctlr |= WDT_CTRL_ENABLE;
++ ///wtdregs->wdctlr |= WDT_CTRL_FRZ_ENABLE;
++ // The 1 sets the enable bit (bit 0) to 1 enabling the watchdog fuctionality
++ // The freeze or lock bit (bit 4) makes bit 0 read-only (to avoid accidental disabling)
++ // Bit 1 is left at 0 signifing that when the counter reaches 0, a machine reset occurs
++ // If bit 1 were 1, then the first time the counter reached 0 an interrupt occurs, and
++ // the second time the counter reaches 0 the machine is reset.
++
++ // Now reset Watchdog to let the above settings take effect
++ wtdregs->wdcntr = WDT_WDCNTR; // 0x1984 is a special reset value
++ return 0;
++}
++
++static int lh79520dog_release(struct inode *inode, struct file *file)
++{
++ /*
++ * Shut off the timer.
++ * Lock it in if it's a module and we defined ...NOWAYOUT
++ */
++ ///wtdregs->wdctr |= 0x0; // turns off bit 4 the freeze lock so we can write to bit 0
++ wtdregs->wdctlr |= WDT_CTRL_DISABLE; // turns off watchdog bit 0
++
++ lh79520wdt_users = 0;
++ MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++static ssize_t lh79520dog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
++{
++ /* Can't seek (pwrite) on this device */
++ if (ppos != &file->f_pos)
++ return -ESPIPE;
++
++ /* Refresh/reload counter */
++ if(len) {
++ unsigned int count = (lh79520_margin * PCLK);
++ wtdregs->wdcnt3 = count && 0xFF000000;
++ wtdregs->wdcnt2 = count && 0x00FF0000;
++ wtdregs->wdcnt1 = count && 0x0000FF00;
++ wtdregs->wdcnt0 = count && 0x000000FF;
++ return 1;
++ }
++ return 0;
++}
++
++static int lh79520dog_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ static struct watchdog_info ident = {
++ identity: "LH79520 Watchdog",
++ };
++
++ switch(cmd){
++ default:
++ return -ENOIOCTLCMD;
++ case WDIOC_GETSUPPORT:
++ return copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident));
++ case WDIOC_GETSTATUS:
++ return put_user(0,(int *)arg);
++ case WDIOC_GETBOOTSTATUS: /* 1 = last reboot was cause by watchdog, 0 means no */
++ return put_user( ! (wtdregs->wdtstr & WDT_WD_NWDRES), (int *)arg);
++ case WDIOC_KEEPALIVE:
++ {
++ unsigned int count = (lh79520_margin * PCLK);
++ wtdregs->wdcnt3 = count && 0xFF000000;
++ wtdregs->wdcnt2 = count && 0x00FF0000;
++ wtdregs->wdcnt1 = count && 0x0000FF00;
++ wtdregs->wdcnt0 = count && 0x000000FF;
++ }
++ return 0;
++ }
++}
++
++/**
++ * lh79520dog_interrupt:
++ * @irq: Interrupt number
++ * @dev_id: Unused as we don't allow multiple devices.
++ * @regs: Unused.
++ *
++ * Handle an interrupt from the board. These are raised when the status
++ * map changes in what the board considers an interesting way. That means
++ * a failure condition occuring.
++ */
++
++void lh79520dog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /*
++ * Read the status register see what is up and
++ * then printk it.
++ */
++
++ unsigned char status=wtdregs->wdtstr;
++
++/* status|=FEATUREMAP1;
++ status&=~FEATUREMAP2; */
++
++ printk(KERN_CRIT "WDT status %d\n", status);
++
++ wtdregs->wdcntr = WDT_WDCNTR; // 0x1984 is a special reset value
++/*
++ if(!(status&WDC_SR_TGOOD))
++ printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT));
++ if(!(status&WDC_SR_PSUOVER))
++ printk(KERN_CRIT "PSU over voltage.\n");
++ if(!(status&WDC_SR_PSUUNDR))
++ printk(KERN_CRIT "PSU under voltage.\n");
++ if(!(status&WDC_SR_FANGOOD))
++ printk(KERN_CRIT "Possible fan fault.\n");
++ if(!(status&WDC_SR_WCCR))
++#ifdef SOFTWARE_REBOOT
++#ifdef ONLY_TESTING
++ printk(KERN_CRIT "Would Reboot.\n");
++#else
++ printk(KERN_CRIT "Initiating system reboot.\n");
++ machine_restart(NULL);
++#endif
++#else
++ printk(KERN_CRIT "Reset in 5ms.\n");
++#endif
++*/
++}
++
++
++static struct file_operations lh79520dog_fops=
++{
++ owner: THIS_MODULE,
++ write: lh79520dog_write,
++ ioctl: lh79520dog_ioctl,
++ open: lh79520dog_open,
++ release: lh79520dog_release,
++};
++
++static struct miscdevice lh79520dog_miscdev=
++{
++ WATCHDOG_MINOR,
++ "LH79520 watchdog",
++ &lh79520dog_fops
++};
++
++static int __init lh79520dog_init(void)
++{
++ int ret;
++
++ ret = misc_register(&lh79520dog_miscdev);
++
++ if (ret)
++ {
++ goto out;
++ }
++
++// ret = request_irq(irq, lh79520dog_interrupt, SA_INTERRUPT, "lh79520wdt", NULL);
++// if(ret) {
++// printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
++// goto outmisc;
++// }
++
++ printk("LH79520 Watchdog Timer: timer margin %d sec\n", lh79520_margin);
++
++ ret=0;
++ out:
++ return ret;
++
++ outmisc:
++ misc_deregister(&lh79520dog_miscdev);
++ goto out;
++
++}
++
++static void __exit lh79520dog_exit(void)
++{
++ misc_deregister(&lh79520dog_miscdev);
++}
++
++module_init(lh79520dog_init);
++module_exit(lh79520dog_exit);
+diff -urN linux-2.4.26/drivers/char/lh79520_wdt.h linux-2.4.26-vrs1-lnode80/drivers/char/lh79520_wdt.h
+--- linux-2.4.26/drivers/char/lh79520_wdt.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/lh79520_wdt.h 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,63 @@
++/**********************************************************************
++ * $Workfile: LH79520_wdt.h $
++ * $Revision: 1.1.1.1 $
++ * $Author: brad $
++ * $Date: 2003/01/04 17:20:29 $
++ *
++ * Project: LH79520 headers
++ *
++ * Description:
++ * This file contains the structure definitions and manifest
++ * constants for LH79520 component:
++ * Watchdog Timer
++ *
++ * References:
++ * (1) ARM Isis Technical Reference Manual, System on Chip Group,
++ * ARM SC063-TRM-0001-B
++ *
++ * COPYRIGHT (C) 2001 SHARP MICROELECTRONICS OF THE AMERICAS, INC.
++ * CAMAS, WA
++ *********************************************************************/
++
++#ifndef LH79520_WDT_H
++#define LH79520_WDT_H
++
++/*
++ * Watchdog Timer Module Register Structure
++ */
++typedef struct {
++ volatile unsigned int wdctlr; /* Control */
++ volatile unsigned int wdcntr; /* Counter Reset */
++ volatile unsigned int wdtstr; /* Test */
++ volatile unsigned int wdcnt0; /* Counter Bits [7:0] */
++ volatile unsigned int wdcnt1; /* Counter Bits [15:8] */
++ volatile unsigned int wdcnt2; /* Counter Bits [23:16] */
++ volatile unsigned int wdcnt3; /* Counter Bits [31:24] */
++} WDTIMERREGS;
++
++/**********************************************************************
++ * Watchdog Timer Register Bit Fields
++ *********************************************************************/
++
++/**********************************************************************
++ * Watchdog Control Register Bit Fields
++ *********************************************************************/
++#define WDT_CTRL_DISABLE 0
++#define WDT_CTRL_ENABLE _SBF(0,1)
++#define WDT_CTRL_RSP_FIQ _SBF(1,0)
++#define WDT_CTRL_RSP_RESET _SBF(1,1)
++#define WDT_CTRL_FRZ_ENABLE _BIT(3)
++#define WDT_CTRL_TOP _SBF(4,((n)&0xF)
++
++/**********************************************************************
++ * Watchdog Counter Reset Register Bit Fields
++ *********************************************************************/
++#define WDT_WDCNTR (0x1984)
++
++/**********************************************************************
++ * Watchdog Register Bit Fields
++ *********************************************************************/
++#define WDT_WD_NWDFIQ _BIT(7)
++#define WDT_WD_NWDRES _BIT(6)
++
++#endif /* LH79520_WDT_H */
+diff -urN linux-2.4.26/drivers/char/Makefile linux-2.4.26-vrs1-lnode80/drivers/char/Makefile
+--- linux-2.4.26/drivers/char/Makefile 2005-11-02 16:54:20.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/Makefile 2005-11-02 17:37:31.000000000 -0400
+@@ -16,7 +16,7 @@
+
+ O_TARGET := char.o
+
+-obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
++obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o cradle.o
+
+ # All of the (potential) objects that export symbols.
+ # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
+@@ -349,6 +349,7 @@
+ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
+ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
+ obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
++obj-$(CONFIG_LH79520_WATCHDOG) += lh79520_wdt.o
+ obj-$(CONFIG_EPXA_WATCHDOG) += epxa_wdt.o
+ obj-$(CONFIG_OMAHA_WATCHDOG) += omaha_wdt.o
+ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+@@ -359,6 +360,12 @@
+ # I2C char devices
+ obj-$(CONFIG_I2C_DS1307) += ds1307.o
+
++# Specific to the LH79520 Sharp dev board.
++# Controls both PWM0 and PWM1
++# PWM0 is the backlighting
++# PWM1 is the audio
++obj-$(CONFIG_LH79520_PWM) += pwm520.o
++
+ subdir-$(CONFIG_MWAVE) += mwave
+ ifeq ($(CONFIG_MWAVE),y)
+ obj-y += mwave/mwave.o
+diff -urN linux-2.4.26/drivers/char/pwm520.c linux-2.4.26-vrs1-lnode80/drivers/char/pwm520.c
+--- linux-2.4.26/drivers/char/pwm520.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/pwm520.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,870 @@
++/*
++ * linux/drivers/char/pwm520.c
++ *
++ * Copyright (C) 2002 Lineo.
++ *
++ * Original code write was authored by Craig Matsuura <cmatsuura@lineo.com>
++ * Parts of this code are from Sharp.
++ * This code falls under the license of the GPL.
++ *
++ * This modules is for controlling the PWM audio and backlighting.
++ * Jumps for backlighting and audio must be set correctly on the LH79520
++ * Board for this module to work properly. See Sharp LH79520 Documentation
++ * for jumper settings.
++ */
++//#define MODULES
++#include <linux/config.h>
++#include <linux/delay.h>
++#include <linux/types.h>
++#include <linux/fcntl.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/ioctl.h>
++#include <asm/irq.h>
++#include <asm/segment.h>
++#include <asm/uaccess.h>
++#include <linux/module.h>
++//#include <limits.h>
++#include <asm/arch/rcpc.h>
++#include <asm/arch/iocon.h>
++#include <asm/arch/hardware.h>
++
++#include "pwm520.h"
++
++pwmRegs_t *pwmregs = (pwmRegs_t *) IO_ADDRESS( PWM_PHYS);
++ioconRegs_t *ioconregs = (ioconRegs_t *)IO_ADDRESS( IOCON_PHYS);
++rcpcRegs_t *rcpcregs = (rcpcRegs_t *)IO_ADDRESS( RCPC_PHYS);
++
++#define TYPE(dev) (MINOR(dev) >> 4) /* high nibble */
++#define NUM(dev) (MINOR(dev) & 0xf) /* low nibble */
++#if OLDWAY
++#define PCLK 51609600 /* ticks per second of AHB clock, 51MHz */
++static int pwm_xtal_freq = XTAL_IN; // From hardware.h
++static int pwm_clkin_freq = 0; // PLL_CLOCK? LH79520_CLKIN_FREQ;
++#else
++unsigned int hclkfreq_get( void);
++#endif
++
++static int pwm_major = 0; // Major Number for Driver 0 indicates dynamic assignment
++static int pwm_prescale = 1;
++
++// Default Freq and Duty Cycles
++static int pwm_audio_freq = 440; // Freq of tone
++static int pwm_audio_dcycle = 50; // Duty Cycle for Audio
++static int pwm_audio_duration = 100000;// Delay (udelay) for beep
++
++static int pwm_backlight_dcycle = 100;// DC for Backlight
++static int pwm_backlight_mode = 0; // Normal Mode
++static int pwm_backlight_freq = BACKLIGHT_INVERTER_PWM_FREQUENCY; // Freq of backlight
++
++#ifdef MODULES
++MODULE_PARM(pwm_major,"i");
++MODULE_PARM(pwm_prescale,"i");
++MODULE_PARM(pwm_xtal_freq,"i");
++MODULE_PARM(pwm_clkin_freq,"i");
++MODULE_PARM(pwm_audio_freq,"i");
++MODULE_PARM(pwm_audio_dcycle,"i");
++MODULE_PARM(pwm_audio_duration,"i");
++MODULE_PARM(pwm_backlight_dcycle,"i");
++MODULE_PARM(pwm_backlight_mode,"i");
++MODULE_PARM(pwm_backlight_freq,"i");
++#endif
++
++
++//void showPWM0Registers();
++
++#if OLDWAY
++/**********************************************************************
++*
++* Function: rcpc_get_bus_clock - From Sharp Source
++*
++* Purpose:
++* return the frequency of the bus clock.
++*
++* Processing:
++* this function returns the frequency of the bus clock in Hz
++* based on the value of frequencies passed in and the value
++* of the RCPC control register CLK_SEL bit.
++*
++* Parameters:
++* xtalin: the frequency at the XTALIN pin; use 0 if there is no
++* crystal or external clock driving the pin.
++* clkin: the frequency driving the CLKIN pin; use 0 if that pin
++* is not driven.
++*
++* Outputs: None
++*
++* Returns:
++* The bus clock frequency in Hz
++*
++* Notes:
++* The nominal crystal input frequency in 14745600 Hz.
++*
++**********************************************************************/
++volatile unsigned long rcpc_get_bus_clock(unsigned long xtalin, unsigned long clkin)
++{
++ unsigned long timebase, divider;
++
++ if ( (rcpcregs->control & RCPC_CTRL_CLKSEL_EXT)
++ == RCPC_CTRL_CLKSEL_EXT)
++ {
++ /* clock source is external clock */
++ timebase = clkin;
++ }
++ else
++ {
++ /* clock source is from PLL output */
++ timebase = xtalin * 21;
++ }
++
++ divider = rcpcregs->HCLKPrescale * 2;
++ if (divider == 0)
++ divider = 1;
++
++ return timebase / divider;
++}
++#endif // OLDWAY
++
++/**********************************************************************
++*
++* Function: pwm1_enable - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Enable PWM output on the PWM1 channel of the LH79520
++*
++* Processing:
++* N/A
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++inline volatile void pwm1_enable(void)
++{
++ pwmregs->pwm1.enable = PWM_EN_ENABLE;
++}
++
++/**********************************************************************
++*
++* Function: pwm1_disable - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Disable PWM output on the PWM1 channel of the LH79520
++*
++* Processing:
++* N/A
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++inline volatile void pwm1_disable(void)
++{
++ pwmregs->pwm1.enable = ~PWM_EN_ENABLE;
++}
++
++/**********************************************************************
++*
++* Function: pwm0_enable - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Enable PWM output on the PWM0 channel of the LH79520
++*
++* Processing:
++* N/A
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++inline volatile void pwm0_enable(void)
++{
++ pwmregs->pwm0.enable = PWM_EN_ENABLE;
++}
++
++/**********************************************************************
++*
++* Function: pwm0_disable - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Disable PWM output on the PWM0 channel of the LH79520
++*
++* Processing:
++* N/A
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++inline volatile void pwm0_disable(void)
++{
++ pwmregs->pwm0.enable = ~PWM_EN_ENABLE;
++}
++
++/**********************************************************************
++*
++* Function: pwm0_normal - Taken for Sharp Driver Example code146
++*
++* Purpose:
++* Restores the normal sense of the PWM output signal on the PWM0
++* channel of the LH79520
++*
++* Processing:
++* N/A
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++inline volatile void pwm0_normal(void)
++{
++ pwmregs->pwm0.invert = ~PWM_INV_INVERT;
++}
++
++
++/**********************************************************************
++*
++* Function: pwm1_frequency - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Sets the PWM1 output frequency to the value specified
++*
++* Processing:
++* Compute the prescale and period count to be programmed from the
++* PCLK frequency. If the frequency value is too high or too low to
++* be programmed within the permissible ranges of prescale and period,
++* signal an error.
++*
++* Parameters:
++* freq - Desired frequency, in Hz
++*
++* Outputs: None
++*
++* Returns:
++* -1 - if frequency specified is zero
++* -1 - if prescale is zero (an impossible condition)
++* -1 - if the frequency is out of bounds
++* 0 - if the frequency is changed successfully
++*
++* Notes:
++* This function depends on the values of LH79520_XTAL_FREQ and
++* LH79520_CLKIN_FREQ to be set correctly in the LH79520_evb.h file.
++* If external clock is used, LH79520_CLKIN_FREQ should be set
++* to the external clock frequency. Otherwise, this function will
++* fail.
++*
++*
++**********************************************************************/
++long pwm1_frequency(unsigned long freq)
++{
++ unsigned long pclk, pwm1clk, prescale;
++ unsigned long div;
++
++ if (0 == freq) {
++ return -1;
++ }
++
++#if OLDWAY
++ pclk = rcpc_get_bus_clock(pwm_xtal_freq,pwm_clkin_freq);
++#else
++ pclk = hclkfreq_get();
++#endif
++ prescale = rcpcregs->PWM1Prescale;
++ if (prescale > 0) {
++ pwm1clk = pclk / (prescale * 2);
++ } else {
++ printk("<4>THIS IS BAD. SHOULD NOT GET HERE...\n");
++ //this should not happen
++ return -1;
++ }
++ div = pwm1clk / freq;
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++
++ while (div > USHRT_MAX && prescale <= SHRT_MAX) {
++ prescale += 1;
++ rcpcregs->PWM1Prescale = prescale;
++ pwm1clk = pclk / (prescale * 2);
++ div = pwm1clk / freq;
++ }
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ pwmregs->pwm1.tc = div;
++
++ return 0;
++}
++
++
++/**********************************************************************
++*
++* Function: pwm1_duty_cycle - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Sets the PWM1 duty cycle to the value specified
++*
++* Processing:
++* Compute the duty cycle count to program into the dc register
++* from the percentage specified and the tc count. Accounts for
++* integer division truncation errors.
++*
++* Parameters:
++* dcpercent - Desired duty cycle as a percentage of the total period
++*
++* Outputs: None
++*
++* Returns:
++* the previous value of the duty cycle, as a percentage
++*
++* Notes:
++*
++**********************************************************************/
++long pwm1_duty_cycle(short dcpercent)
++{
++ unsigned short period;
++ unsigned long duty_cycle, prev_dc, prev_dc_percent;
++ period = (unsigned short) pwmregs->pwm1.tc;
++ prev_dc = pwmregs->pwm1.dc;
++ if (period > 0) {
++ prev_dc_percent = ((prev_dc * 100) + (period >> 1)) / period;
++ } else {
++ prev_dc_percent = 100;
++ }
++ duty_cycle = ((dcpercent * period) + 50) / 100;
++ pwmregs->pwm1.dc = duty_cycle;
++ return(long)prev_dc_percent;
++}
++
++/**********************************************************************
++*
++* Function: pwm0_frequency - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Sets the PWM0 output frequency to the value specified
++*
++* Processing:
++* Compute the prescale and period count to be programmed from the
++* PCLK frequency. If the frequency value is too high or too low to
++* be programmed within the permissible ranges of prescale and period,
++* signal an error.
++*
++* Parameters:
++* freq - Desired frequency, in Hz
++*
++* Outputs: None
++*
++* Returns:
++* -1 - if frequency specified is zero
++* -1 - if prescale is zero (an impossible condition)
++* -1 - if the frequency is out of bounds
++* 0 - if the frequency is changed successfully
++*
++* Notes:
++* This function depends on the values of LH79520_XTAL_FREQ and
++* LH79520_CLKIN_FREQ to be set correctly in the LH79520_evb.h file.
++* If external clock is used, LH79520_CLKIN_FREQ should be set
++* to the external clock frequency. Otherwise, this function will
++* fail.
++*
++*
++**********************************************************************/
++long pwm0_frequency(unsigned long freq)
++{
++ unsigned long pclk, pwm0clk, prescale;
++ unsigned long div;
++
++ if (0 == freq) {
++ return -1;
++ }
++
++#if OLDWAY
++ pclk = rcpc_get_bus_clock(pwm_xtal_freq,pwm_clkin_freq);
++#else
++ pclk = hclkfreq_get();
++#endif
++ prescale = rcpcregs->PWM0Prescale;
++ if (prescale > 0) {
++ pwm0clk = pclk / (prescale * 2);
++ } else {
++ printk("<4>THIS IS BAD. SHOULD NOT GET HERE...\n");
++ //this should not happen
++ return -1;
++ }
++ div = pwm0clk / freq;
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++
++ //FJB hack for orderite
++ rcpcregs->PWM0Prescale = 0x0a;
++#if 0
++ while (div > USHRT_MAX && prescale <= SHRT_MAX) {
++ prescale += 1;
++ rcpcregs->PWM0Prescale = prescale;
++ pwm0clk = pclk / (prescale * 2);
++ div = pwm0clk / freq;
++ }
++#endif
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ //pwmregs->pwm0.tc = div;
++ pwmregs->pwm0.tc = 0x285;
++
++ return 0;
++}
++
++
++/**********************************************************************
++*
++* Function: pwm0_duty_cycle - Taken for Sharp Driver Example code
++*
++* Purpose:
++* Sets the PWM0 duty cycle to the value specified
++*
++* Processing:
++* Compute the duty cycle count to program into the dc register
++* from the percentage specified and the tc count. Accounts for
++* integer division truncation errors.
++*
++* Parameters:
++* dcpercent - Desired duty cycle as a percentage of the total period
++*
++* Outputs: None
++*
++* Returns:
++* the previous value of the duty cycle, as a percentage
++*
++* Notes:
++*
++**********************************************************************/
++long pwm0_duty_cycle(short dcpercent)
++{
++ unsigned short period;
++ unsigned long duty_cycle, prev_dc, prev_dc_percent;
++ period = (unsigned short) pwmregs->pwm0.tc;
++ prev_dc = pwmregs->pwm0.dc;
++ if (period > 0) {
++ prev_dc_percent = ((prev_dc * 100) + (period >> 1)) / period;
++ } else {
++ prev_dc_percent = 100;
++ }
++ duty_cycle = ((dcpercent * period) + 50) / 100;
++ pwmregs->pwm0.dc = duty_cycle;
++ return(long)prev_dc_percent;
++}
++
++/**********************************************************************
++*
++* Function: backlight_decrease_brightness
++*
++* Purpose:
++* Decrease the LCD backlight brightness
++*
++* Processing:
++* Decrement static variable holding current brightness level and
++* set the PWM duty cycle.
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++void backlight_increase_brightness(void)
++{
++ pwm_backlight_dcycle--;
++ if (pwm_backlight_dcycle < 0)
++ {
++ pwm_backlight_dcycle = 0;
++ }
++ pwm0_duty_cycle(pwm_backlight_dcycle);
++}
++
++/**********************************************************************
++*
++* Function: backlight_increase_brightness
++*
++* Purpose:
++* Increase the LCD backlight brightness
++*
++* Processing:
++* Increment static variable holding current brightness level and
++* set the PWM duty cycle.
++*
++* Parameters: None
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++void backlight_decrease_brightness(void)
++{
++ pwm_backlight_dcycle++;
++ if (pwm_backlight_dcycle > 100)
++ {
++ pwm_backlight_dcycle = 100;
++ }
++ pwm0_duty_cycle(pwm_backlight_dcycle);
++}
++
++/**********************************************************************
++*
++* Function: backlight_set_brightness
++*
++* Purpose:
++* Set the LCD backlight brightness to the level specified
++*
++* Processing:
++* N/A
++*
++* Parameters:
++* bright - desired brightness level as a percentage of maximum
++* brightness
++*
++* Outputs: None
++*
++* Returns: Nothing
++*
++* Notes:
++*
++**********************************************************************/
++void backlight_set_brightness(int bright)
++{
++ //bright = 0 means least brightness
++ //bright = 100 means max brightness
++ if (bright > 100)
++ {
++ bright = 100;
++ }
++ if (bright < 0)
++ {
++ bright = 0;
++ }
++
++ pwm_backlight_dcycle = 100 - bright;
++ pwm0_duty_cycle(pwm_backlight_dcycle);
++}
++
++
++/****************************************************************************
++ * Open Function - Open the device either the Backlight or the Audio
++ * /dev/pwm0 c 254 1 is the Backlighting
++ * /dev/pwm1 c 254 0 is the Audio
++ * Keep in mind the 254 is only an example. If you do not specify a
++ * major code then a dynamic one will be assigned. You will have to
++ * look at /proc/devices to see the major code for pwm
++ */
++int pwm_open(struct inode * inode, struct file * filp)
++{
++
++ MOD_INC_USE_COUNT;
++
++// printk("<4>open pwm... dc=%d, bl_dc=%d\n",pwmregs->pwm0.dc,pwm_backlight_dcycle);
++ switch (NUM(inode->i_rdev)) {
++ case 0: // Audio
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpcregs->periphClkCtrl &= ~RCPC_CLKCTRL_PWM0_DISABLE;
++ rcpcregs->PWM0Prescale = ((~_BIT(15)) & pwm_prescale);
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ ioconregs->MiscMux |= MISCMUX_PWM0;
++ break;
++#if 0
++ case 1: // Backlight
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpcregs->periphClkCtrl &= ~RCPC_CLKCTRL_PWM1_DISABLE;
++ rcpcregs->PWM0Prescale = ((~_BIT(15)) & pwm_prescale);
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ ioconregs->MiscMux |= MISCMUX_PWM1;
++
++ if (pwm_backlight_mode) {
++ pwmregs->pwm0.sync = PWM_SYNC_SYNC;
++ ioconregs->MiscMux |= MISCMUX_PWM0SYNC;
++ }
++ else
++ {
++ pwmregs->pwm0.sync = PWM_SYNC_NORMAL;
++ }
++
++ pwm0_frequency(pwm_backlight_freq);
++ pwm0_duty_cycle(pwm_backlight_dcycle);
++ pwm0_normal();
++ pwm0_enable();
++ break;
++#endif
++ default:
++ printk("<4>Minor device unknown %d\n",NUM(inode->i_rdev));
++ break;
++ }
++
++ return 0;
++}
++
++/****************************************************************************
++ *
++ */
++int pwm_release(struct inode *inode, struct file * filp)
++{
++// printk("<4>release pwm...\n");
++ switch (NUM(inode->i_rdev)) {
++ case 0: // Audio
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpcregs->periphClkCtrl |= RCPC_CLKCTRL_PWM0_DISABLE;
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ ioconregs->MiscMux &= ~MISCMUX_PWM0;
++ pwm0_disable();
++ break;
++ case 1: // Should be backlight of touchscreen
++ //rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ //barrier();
++ //rcpcregs->periphClkCtrl |= RCPC_CLKCTRL_PWM0_DISABLE;
++ //rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ //ioconregs->MiscMux &= ~MISCMUX_PWM0;
++ //pwmregs->pwm0.enable = ~PWM_EN_ENABLE;
++ break;
++
++ default:
++ printk("<4>Minor device unknown %d\n",NUM(inode->i_rdev));
++ break;
++ }
++
++ MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++/****************************************************************************
++ *
++ */
++ssize_t pwm_read(struct file * file, char * buf,
++ size_t count, loff_t *ppos)
++{
++ return 0;
++}
++
++/****************************************************************************
++ *
++ */
++ssize_t pwm_write(struct file * file, const char * buf,
++ size_t count, loff_t *ppos)
++{
++ return 0;
++}
++
++/****************************************************************************
++ *
++ */
++int pwm_ioctl(struct inode *inode, struct file * file,
++ unsigned int cmd, unsigned long arg)
++{
++ //int err = 0, size = _IOC_SIZE(cmd);
++
++ if (_IOC_TYPE(cmd) != PWM520_IOC_MAGIC) {
++ return -EINVAL;
++ }
++ if (_IOC_NR(cmd) > PWM520_IOC_MAXNR) {
++ return -EINVAL;
++ }
++
++ /*
++ Should check for direction bits see page 101 in "Linux Device Drivers Book"
++ size and err used here.
++ */
++
++ switch (NUM(inode->i_rdev)) {
++ case 0: // Audio
++ switch (cmd) {
++ case PWM520_IOCBEEP:
++ pwm0_frequency(pwm_audio_freq);
++ pwm0_duty_cycle(pwm_audio_dcycle);
++ pwm0_enable();
++ udelay(pwm_audio_duration);
++ pwm0_disable();
++ break;
++
++ case PWM520_IOCSTARTSND:
++ pwm0_frequency(pwm_audio_freq);
++ pwm0_duty_cycle(pwm_audio_dcycle);
++ pwm0_enable();
++ break;
++
++ case PWM520_IOCSTOPSND:
++ pwm0_disable();
++ break;
++
++ case PWM520_IOCSETFREQ: // Set Frequency
++ pwm_audio_freq = arg;
++ break;
++
++ case PWM520_IOCSETDCYCLE: // Set Duty Cycle
++ pwm_audio_dcycle = arg;
++ break;
++
++ case PWM520_IOCGETFREQ: // Get Frequency
++ __put_user(pwm_audio_freq, (int *) arg);
++ break;
++
++ case PWM520_IOCGETDCYCLE: // Get Duty Cycle
++ __put_user(pwm_audio_dcycle, (int *) arg);
++ break;
++ }
++ break;
++#if 0
++ case 1: // Should be backlight of touchscreen
++ switch (cmd) {
++ case PWM520_IOCRESET:
++// printk("Reset pwm0\n");
++ pwm_backlight_dcycle = 100;// DC for Backlight
++ pwm_backlight_mode = 0; // Normal Mode
++ pwm_backlight_freq = BACKLIGHT_INVERTER_PWM_FREQUENCY; // Freq of backlight
++ break;
++ case PWM520_IOCSTOPPWM0: // Stop PWM0
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpcregs->periphClkCtrl |= RCPC_CLKCTRL_PWM0_DISABLE;
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ ioconregs->MiscMux &= ~MISCMUX_PWM0;
++ pwmregs->pwm0.enable = ~PWM_EN_ENABLE;
++ break;
++ case PWM520_IOCINCREASEBL:
++// printk("Brighter\n");
++ backlight_increase_brightness();
++ break;
++
++ case PWM520_IOCDECREASEBL:
++// printk("Lighter\n");
++ backlight_decrease_brightness();
++ break;
++
++ case PWM520_IOCSETBL:
++// printk("Set to %ld\n",arg);
++ backlight_set_brightness(arg);
++ break;
++ }
++ break;
++#endif
++
++ }
++
++ return 0;
++}
++
++
++/****************************************************************************
++ *
++ */
++struct file_operations pwm_fops = {
++ owner: THIS_MODULE,
++ llseek: no_llseek,
++ read: pwm_read,
++ write: pwm_write,
++ ioctl: pwm_ioctl,
++ open: pwm_open,
++ release: pwm_release,
++};
++
++#if 0
++void test_pwm1()
++{
++ printk("TEST CASE PLEASE REMOVE ONCE DONE\n");
++
++ rcpcregs->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpcregs->periphClkCtrl &= ~RCPC_CLKCTRL_PWM1_DISABLE;
++ rcpcregs->PWM1Prescale = ((~_BIT(15)) & pwm_prescale);
++ rcpcregs->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ ioconregs->MiscMux |= MISCMUX_PWM1;
++
++ pwm1_frequency(pwm_audio_freq);
++ pwm1_duty_cycle(pwm_audio_dcycle);
++ pwm1_enable();
++}
++
++void showPWM1Registers()
++{
++ printk("PWM1 Registers\n");
++ printk("=============\n\n");
++ printk("pwm1.tc = %x\n",pwmregs->pwm1.tc);
++ printk("pwm1.dc = %x\n",pwmregs->pwm1.dc);
++ printk("pwm1.enable = %x\n",pwmregs->pwm1.enable);
++ printk("pwm1.invert = %x\n",pwmregs->pwm1.invert);
++ printk("pwm1.sync = %x\n",pwmregs->pwm1.sync);
++}
++
++void showPWM0Registers()
++{
++ printk("PWM0 Registers\n");
++ printk("=============\n\n");
++ printk("pwm0.tc = %d\n",pwmregs->pwm0.tc);
++ printk("pwm0.dc = %d\n",pwmregs->pwm0.dc);
++ printk("pwm0.enable = 0x%x\n",pwmregs->pwm0.enable);
++ printk("pwm0.invert = 0x%x\n",pwmregs->pwm0.invert);
++ printk("pwm0.sync = 0x%x\n",pwmregs->pwm0.sync);
++}
++
++#endif
++
++/****************************************************************************
++ *
++ */
++static int __init pwm_init_module(void)
++{
++ int result;
++
++ //printk("<1>Start PWM Module\n");
++ printk("<1>Sharp LH79520 PWM Driver Copyright 2002 Lineo\n");
++
++ result = register_chrdev(pwm_major,"pwm",&pwm_fops);
++ if (result < 0) {
++ printk("<4>pwm: can't get major number %d\n",pwm_major);
++ return result;
++ }
++ if (pwm_major == 0) {
++ pwm_major = result; /* Dynamic Allocation of major number */
++ printk("<4>PWM Dynamic Major Number %d\n",pwm_major);
++ }
++
++ return 0;
++}
++
++/****************************************************************************
++ *
++ */
++static void __exit pwm_cleanup_module(void)
++{
++ int result;
++
++ printk("<1>End PWM Module...\n");
++ result = unregister_chrdev(pwm_major,"pwm");
++}
++
++module_init(pwm_init_module);
++module_exit(pwm_cleanup_module);
+diff -urN linux-2.4.26/drivers/char/pwm520.h linux-2.4.26-vrs1-lnode80/drivers/char/pwm520.h
+--- linux-2.4.26/drivers/char/pwm520.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/char/pwm520.h 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,58 @@
++/*
++ * linux/drivers/char/pwm520.h
++ *
++ * Copyright (C) 2002 Lineo.
++ *
++ * Original code write was authored by Craig Matsuura <cmatsuura@lineo.com>
++ * Parts of this code are from Sharp.
++ * This code falls under the license of the GPL.
++ *
++ * This modules is for controlling the PWM audio and backlighting.
++ * Jumps for backlighting and audio must be set correctly on the LH79520
++ * Board for this module to work properly. See Sharp LH79520 Documentation
++ * for jumper settings.
++ */
++#ifndef __PWM520_H
++#define __PWM520_H
++
++typedef struct {
++ volatile unsigned int tc;
++ volatile unsigned int dc;
++ volatile unsigned int enable;
++ volatile unsigned int invert;
++ volatile unsigned int sync;
++ volatile unsigned int res[3];
++} pwmXRegs_t;
++
++typedef struct {
++ volatile pwmXRegs_t pwm0;
++ volatile pwmXRegs_t pwm1;
++} pwmRegs_t;
++
++extern pwmRegs_t *pwmregs;
++
++#define PWM_EN_ENABLE _BIT(0)
++#define PWM_INV_INVERT _BIT(0)
++#define PWM_SYNC_SYNC _SBF(0,1)
++#define PWM_SYNC_NORMAL _SBF(0,0)
++
++#define BACKLIGHT_INVERTER_PWM_FREQUENCY (200) // 200Hz
++
++// IOCTL's
++#define PWM520_IOC_MAGIC 'p'
++#define PWM520_IOCBEEP _IO(PWM520_IOC_MAGIC, 0)
++#define PWM520_IOCSTARTSND _IO(PWM520_IOC_MAGIC, 1)
++#define PWM520_IOCSTOPSND _IO(PWM520_IOC_MAGIC, 2)
++#define PWM520_IOCSETFREQ _IOW(PWM520_IOC_MAGIC, 3, int)
++#define PWM520_IOCSETDCYCLE _IOW(PWM520_IOC_MAGIC, 4, int)
++#define PWM520_IOCGETFREQ _IOR(PWM520_IOC_MAGIC, 5, int)
++#define PWM520_IOCGETDCYCLE _IOR(PWM520_IOC_MAGIC, 6, int)
++
++#define PWM520_IOCRESET _IO(PWM520_IOC_MAGIC, 7)
++#define PWM520_IOCSTOPPWM0 _IO(PWM520_IOC_MAGIC, 8)
++#define PWM520_IOCINCREASEBL _IO(PWM520_IOC_MAGIC, 9)
++#define PWM520_IOCDECREASEBL _IO(PWM520_IOC_MAGIC, 10)
++#define PWM520_IOCSETBL _IOW(PWM520_IOC_MAGIC, 11, int)
++
++#define PWM520_IOC_MAXNR 11
++#endif
+diff -urN linux-2.4.26/drivers/misc/ads784x.c linux-2.4.26-vrs1-lnode80/drivers/misc/ads784x.c
+--- linux-2.4.26/drivers/misc/ads784x.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/ads784x.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,1064 @@
++/* vi: set sw=4 ts=4 ai: */
++
++// #define MODULE
++
++#define TS_DATA_QTOPIA
++#undef CONFIG_ADS7846
++
++/**********************************************************************
++* linux/drivers/misc/ads784x.c
++*
++* Provide ADS_784x (touchscreen) functionality for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++/**********************************************************************
++* Algorithm:
++*
++* The driver sleeps when there is no pen on the screen. When a pen_down
++* interrupt occurs, the pen_down interrupt handler wakes the polling thread.
++* The polling thread polls the ADS chip SAMPLES_PER_SECOND. When the polling
++* thread polls the ADS chip and the pen is no longer down, the polling
++* thread goes to sleep and the pen_down interrupt handler is enabled.
++*
++* The ADS device sleeps between conversions to save power.
++*
++* The driver stores pen coordinates in a queue. An application can access
++* the coordinate queue by opening and reading the associated device file
++* (char major=10 minor=20). An application can poll the queue to see if
++* it contains coordinates. If it does, the application can read a coordinate
++* structure back. The coordinate queue is flushed when the application
++* opens the device file.
++*
++**********************************************************************/
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/proc_fs.h>
++#include <linux/smp_lock.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++
++#undef DEBUG
++#undef VERBOSE
++#define DRVNAME "ads_784x"
++#include <linux/verbosedebug.h>
++
++#include <linux/version.h>
++#ifdef MODULE
++char kernel_version[] = UTS_RELEASE;
++#endif /* MODULE */
++
++#include "ssp.h"
++
++#if defined(CONFIG_ADS7846) && defined(CONFIG_PROC_FS)
++# define PROC_TEMPERATURE
++# define PROC_BATTERY
++#endif
++
++#ifdef PROC_BATTERY
++static struct proc_dir_entry *ads_784x_proc_battery;
++#endif
++#ifdef PROC_TEMPERATURE
++static struct proc_dir_entry *ads_784x_proc_temperature;
++#endif
++
++/*********************************************************************
++* A couple of macros we use here...
++*********************************************************************/
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++#ifndef _BITMASK
++#define _BITMASK(field_width) ( _BIT(field_width) - 1)
++#endif
++
++/**********************************************************************
++* Define ADS 784x Control byte
++**********************************************************************/
++
++#define CTRL_S _BIT(7) /* Start bit (REQUIRED) */
++
++// #define CTRL_ADDR(n) _SBF(4,(n&0x7))
++#define CTRL_X _SBF(4,0x1) /* Read X value */
++#define CTRL_Y _SBF(4,0x5) /* Read Y value */
++#ifdef CONFIG_ADS7846
++#define CTRL_P1 _SBF(4,0x3) /* Read P1 value */
++#define CTRL_P2 _SBF(4,0x4) /* Read P2 value */
++#define CTRL_BATTERY _SBF(4,0x2) /* Read BATTERY value */
++#define CTRL_TEMP0 _SBF(4,0x0) /* Read Temperature-0 value */
++#define CTRL_TEMP1 _SBF(4,0x7) /* Read Temperature-1 value */
++#endif // CONFIG_ADS7846
++
++// #define CTRL_MODE(n) _SBF(3,(n&0x1))
++#define CTRL_12BIT _SBF(3,0x0) /* 12-Bit conversions */
++#define CTRL_8BIT _SBF(3,0x1) /* 8-Bit conversions */
++
++// #define CTRL_SER_DFR(n) _SBF(2,(n&0x1))
++#define CTRL_SER _SBF(2,0x1) /* Single-Ended reference */
++#define CTRL_DFR _SBF(2,0x0) /* Differential reference */
++
++// #define CTRL_PD(n) (n&0x3)
++#define CTRL_PD_ZERO (0x0) /* PenIRQ enabled - PowerDown after */
++#define CTRL_PD_ONE (0x1) /* PenIRQ disabled - PowerDown after */
++#define CTRL_PD_TWO (0x2) /* PenIRQ disabled - RESERVED */
++#define CTRL_PD_THREE (0x3) /* PenIRQ disabled - Powered ON */
++
++/**********************************************************************
++* Define Simplified ADS 784x Control Codes
++**********************************************************************/
++
++//#define ADS_784x_PD 0 /* Power Down Settings */
++//#define ADS_784x_PD_INIT 0 /* Init setting reference and ADC Off */
++
++#define ADS_784x_INIT \
++ ( CTRL_S | CTRL_X | CTRL_12BIT | CTRL_DFR | CTRL_PD_ZERO)
++#define ADS_784x_READ_X \
++ ( CTRL_S | CTRL_X | CTRL_12BIT | CTRL_DFR | CTRL_PD_ZERO)
++#define ADS_784x_READ_Y \
++ ( CTRL_S | CTRL_Y | CTRL_12BIT | CTRL_DFR | CTRL_PD_ZERO)
++#ifdef CONFIG_ADS7846
++#define ADS_784x_READ_P1 \
++ ( CTRL_S | CTRL_P1 | CTRL_12BIT | CTRL_DFR | CTRL_PD_ZERO)
++#define ADS_784x_READ_P2 \
++ ( CTRL_S | CTRL_P2 | CTRL_12BIT | CTRL_DFR | CTRL_PD_ZERO)
++#define ADS_784x_READ_BATTERY \
++ ( CTRL_S | CTRL_BATTERY | CTRL_12BIT | CTRL_SER | CTRL_PD_ZERO)
++#define ADS_784x_READ_TEMP0 \
++ ( CTRL_S | CTRL_TEMP0 | CTRL_12BIT | CTRL_SER | CTRL_PD_ZERO)
++#define ADS_784x_READ_TEMP1 \
++ ( CTRL_S | CTRL_TEMP1 | CTRL_12BIT | CTRL_SER | CTRL_PD_ZERO)
++#endif // CONFIG_ADS7846
++
++/**********************************************************************
++* Define our touchscreen data type
++*
++* This structure is nonsense - millisecs is not very useful
++* since the field size is too small. Also, we SHOULD NOT
++* be exposing jiffies to user space directly.
++**********************************************************************/
++typedef struct tsData_t tsData_t;
++
++#ifdef TS_DATA_COLLIE
++#define TS_DATA_STRUCT
++#define PROVIDE_TS_MILLISECS
++struct tsData_t {
++ long x;
++ long y;
++ long pressure;
++ long long millisecs;
++};
++#endif
++
++#ifdef TS_DATA_IPAQ
++#define TS_DATA_STRUCT
++struct tsData_t {
++ unsigned short pressure;
++ unsigned short x;
++ unsigned short y;
++ unsigned short pad;
++};
++#endif
++
++#ifdef TS_DATA_LH79X
++#define TS_DATA_STRUCT
++struct tsData_t {
++ uint16_t pressure;
++ uint16_t y; /* Will be read as X */
++ uint16_t x; /* Will be read as Y */
++ uint16_t pad;
++};
++#endif
++
++/*
++QTopia data format:
++unsigned char data2[5];
++data.status=data2[0]; // bit 0x40 is "touch"/left mouse
++data.xpos=(data2[1] << 8) | data2[2];
++data.ypos=(data2[3] << 8) | data2[4];
++*/
++
++#ifdef TS_DATA_QTOPIA
++#define TS_DATA_STRUCT
++struct tsData_t {
++ unsigned char pressure;
++ unsigned char xhigh;
++ unsigned char xlow;
++ unsigned char yhigh;
++ unsigned char ylow;
++} __attribute__ ((packed));
++#endif
++
++#ifndef TS_DATA_STRUCT
++#define TS_DATA_DEFAULT
++#define PROVIDE_TS_TIMESTAMP
++struct tsData_t {
++ uint16_t pressure;
++ uint16_t x;
++ uint16_t y;
++ uint16_t pad;
++ struct timeval stamp;
++};
++#endif
++
++#define MAX_TS_DATA 16
++
++#define X_DELTA_MAX 10
++#define Y_DELTA_MAX 10
++
++/* Define the readings we are to take per second (default to 50) */
++#define SAMPLES_PER_SECOND 10
++
++/*
++* Define the pen down debounce we are to take.
++* (default of 20 == 1/20 of a second)
++*/
++#define DEBOUNCE_FRACTION_OF_A_SECOND 50
++
++/**********************************************************************
++* Define our ADS context structure
++**********************************************************************/
++typedef struct adsContext_t adsContext_t;
++struct adsContext_t {
++
++ void *sspContext;
++ void (*write) (void *sspContext, unsigned int data);
++ unsigned int (*read) (void *sspContext);
++ int (*enable_pen_down_irq)(void *sspContext);
++ int (*disable_pen_down_irq)(void *sspContext);
++ int (*is_pen_down)(void *sspContext);
++ int (*lock)(void *sspContext, int device);
++ int (*unlock)(void *sspContext, int device);
++ void (*chipselect_enable)(void);
++ void (*chipselect_disable)(void);
++ void (*chipselect_manual)(void);
++
++ struct fasync_struct *fasync;
++ struct completion complete;
++ struct task_struct *rtask;
++
++ wait_queue_head_t read_wait;
++ wait_queue_head_t irq_wait;
++
++ int tsDataHead;
++ int tsDataTail;
++ tsData_t tsData[MAX_TS_DATA];
++};
++static adsContext_t adsContext_l;
++
++/**********************************************************************
++* Macro: ads_784x_tsData_pending
++**********************************************************************/
++#define ads_784x_tsData_pending(adsContext) \
++ ((adsContext)->tsDataHead != (adsContext)->tsDataTail)
++
++/**********************************************************************
++* Macro: ads_784x_tsData_get
++**********************************************************************/
++#define ads_784x_tsData_get(adsContext) \
++ ((adsContext)->tsData + (adsContext)->tsDataTail)
++
++/**********************************************************************
++* Macro: ads_784x_tsData_pull
++**********************************************************************/
++#define ads_784x_tsData_pull(adsContext) \
++ ((adsContext)->tsDataTail = \
++ ((adsContext)->tsDataTail + 1) & (MAX_TS_DATA - 1))
++
++/**********************************************************************
++* Macro: ads_784x_tsData_flush
++**********************************************************************/
++#define ads_784x_tsData_flush(adsContext) \
++ ((adsContext)->tsDataTail = (adsContext)->tsDataHead)
++
++/**********************************************************************
++* Function: ads_784x_tsData_add
++**********************************************************************/
++static inline void ads_784x_tsData_add(
++ adsContext_t *adsContext,
++ unsigned int pressure,
++ unsigned int x,
++ unsigned int y)
++{
++ int next_head;
++ long xcoff, ycoff;
++
++ vdprintk("ENTER: ads_784x_tsData_add()\n");
++ next_head = (adsContext->tsDataHead + 1) & (MAX_TS_DATA - 1);
++ if (next_head != adsContext->tsDataTail) {
++#ifndef TS_DATA_QTOPIA
++ adsContext->tsData[adsContext->tsDataHead].pressure = pressure;
++ adsContext->tsData[adsContext->tsDataHead].x = x;
++ adsContext->tsData[adsContext->tsDataHead].y = y;
++#ifdef PROVIDE_TS_TIMESTAMP
++ get_fast_time(&adsContext->tsData[adsContext->tsDataHead].stamp);
++#endif
++#else // TS_DATA_QTOPIA
++ adsContext->tsData[adsContext->tsDataHead].pressure = pressure ? 0x40 : 0;
++ adsContext->tsData[adsContext->tsDataHead].xlow = x & 0xFF;
++ adsContext->tsData[adsContext->tsDataHead].xhigh = x >> 8;
++ adsContext->tsData[adsContext->tsDataHead].ylow = y & 0xFF;
++ adsContext->tsData[adsContext->tsDataHead].yhigh = y >> 8;
++#endif // TS_DATA_QTOPIA
++ adsContext->tsDataHead = next_head;
++ if (adsContext->fasync)
++ kill_fasync(&adsContext->fasync, SIGIO, POLL_IN);
++ wake_up_interruptible(&adsContext->read_wait);
++ }
++ vdprintk("LEAVE: ads_784x_tsData_add()\n");
++ return;
++}
++
++/**********************************************************************
++* Function: ads_784x_Read_tsData
++**********************************************************************/
++static int x_last, y_last;
++static int ads_784x_Read_tsData(adsContext_t *adsContext)
++{
++ void *sspContext = adsContext->sspContext;
++ int x=0, x_1=0, x_2=0;
++ int y=0, y_1=0, y_2=0;
++ int pen_down = 0;
++ int p = 0;
++#ifdef CONFIG_ADS7846
++ int p1=0, p1_1=0, p1_2=0;
++ int p2=0, p2_1=0, p2_2=0;
++#endif
++
++ vdprintk("ENTER: ads_784x_Read_tsData()\n");
++
++#define TS_AVG_ITERS 8
++
++ /*
++ * Filtering is policy. Policy belongs in user space. We
++ * therefore leave it to user space to do any filtering
++ * they please.
++ *
++ * We do however, read twice and check against maximum x & y deltas
++ * to reduce the amount of garbage returned.
++ *
++ * Note: There will be one reading with p=0 given when the pen is raised.
++ */
++
++ /* Read the pen_down data first as it jitters after the other reads */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ pen_down = adsContext->is_pen_down(sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++
++ do {
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ /*
++ * Read the pressure, X position, and Y position.
++ * Interleave them for better performance
++ */
++ //FJB
++ adsContext->chipselect_enable();
++#ifdef CONFIG_ADS7846
++ adsContext->write(sspContext, ADS_784x_READ_P1);
++ adsContext->write(sspContext, ADS_784x_READ_P2);
++ p1_1 = adsContext->read(sspContext);
++ p2_1 = adsContext->read(sspContext);
++#endif
++ adsContext->write(sspContext, ADS_784x_READ_X);
++ x_1 = adsContext->read(sspContext);
++ adsContext->write(sspContext, ADS_784x_READ_Y);
++ y_1 = adsContext->read(sspContext);
++
++ /*
++ * ... AGAIN ...
++ * Read the pressure, X position, and Y position.
++ * Interleave them for better performance
++ */
++#ifdef CONFIG_ADS7846
++ adsContext->write(sspContext, ADS_784x_READ_P1);
++ adsContext->write(sspContext, ADS_784x_READ_P2);
++ p1_2 = adsContext->read(sspContext);
++ p2_2 = adsContext->read(sspContext);
++#endif
++ adsContext->write(sspContext, ADS_784x_READ_X);
++ x_2 = adsContext->read(sspContext);
++ adsContext->write(sspContext, ADS_784x_READ_Y);
++ y_2 = adsContext->read(sspContext);
++
++ //FJB
++ adsContext->chipselect_disable();
++
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++
++ } while ((x_1 > (x_2+X_DELTA_MAX)) || (x_2 > (x_1+X_DELTA_MAX))
++ || (y_1 > (y_2+Y_DELTA_MAX)) || (y_2 > (y_1+Y_DELTA_MAX))
++ || (x_1 == 0) || (y_1 == 0) || (x_2 == 0) || (y_2 == 0));
++
++
++#ifdef CONFIG_ADS7846
++ p1 = (p1_1 + p1_2) / 2;
++ p2 = (p2_1 + p2_2) / 2;
++ p = p2 - p1;
++#else
++ p = pen_down;
++#endif
++ x = (x_1 + x_2) / 2;
++ y = (y_1 + y_2) / 2;
++
++ // normalize values
++ // very subject to experimentation
++
++#if 0
++ if((x == 0) || (y == 0))
++ {
++ x = x_last;
++ y = y_last;
++ }
++ else
++ {
++ x_last = x;
++ y_last = y;
++ }
++#endif
++
++ y = (1 << 12) - y;
++ vdprintk("LEAVE: ads_784x_Read_tsData(x=0x%03x, y=0x%03x)\n", x, y);
++ ads_784x_tsData_add(adsContext, 0x40, x, y); // generate pen up/pen down sequence
++ ads_784x_tsData_add(adsContext, 0x00, x, y);
++
++ return(pen_down);
++}
++
++/**********************************************************************
++* Function: ads_784x_thread
++*
++* This is a RT kernel thread that handles the ADC accesses
++* (mainly so we can use semaphores to serialise accesses to the ADC).
++**********************************************************************/
++static int ads_784x_thread(void *_adsContext)
++{
++ adsContext_t *adsContext = _adsContext;
++ void *sspContext = adsContext->sspContext;
++ struct task_struct *tsk = current;
++ DECLARE_WAITQUEUE(wait, tsk);
++ int pen_down = 0;
++
++ vdprintk("ENTER: ads_784x_thread()\n");
++ adsContext->rtask = tsk;
++
++ daemonize();
++ tsk->tty = NULL;
++ strcpy(tsk->comm, "ktsd");
++
++ /* only want to receive SIGKILL */
++ spin_lock_irq(&tsk->sigmask_lock);
++ siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
++ recalc_sigpending(tsk);
++ spin_unlock_irq(&tsk->sigmask_lock);
++
++ add_wait_queue(&adsContext->irq_wait, &wait);
++
++ complete(&adsContext->complete);
++
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ pen_down = adsContext->is_pen_down(sspContext);
++ vdprintk("TSThrPD: %d\t", pen_down);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++ for (;;) {
++ signed long interval;
++
++ /*
++ * Set to interrupt mode and wait a settling time.
++ */
++ set_task_state(tsk, TASK_INTERRUPTIBLE);
++ if (sspContext == NULL) {
++ interval = HZ; /* Check for change once per second */
++ } else if (pen_down) {
++ /* If pen is down then periodically read pen position */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->disable_pen_down_irq(sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++ interval = HZ/SAMPLES_PER_SECOND;
++ } else {
++ /* If pen is not down then sleep until pen down interrupt */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->enable_pen_down_irq(sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++ interval = MAX_SCHEDULE_TIMEOUT;
++ }
++ schedule_timeout(interval);
++ if (signal_pending(tsk)) {
++ break;
++ }
++#if 0
++ if (pen_down == 0) {
++ /*
++ * On pen down there is some bounce.
++ * Wait a debounce period and read it again.
++ */
++ schedule_timeout(HZ/DEBOUNCE_FRACTION_OF_A_SECOND);
++ if (signal_pending(tsk)) {
++ break;
++ }
++ /*
++ * If the pen is not down after the debounce period,
++ * ignore the pen down signal.
++ */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ pen_down = adsContext->is_pen_down(sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++ if (pen_down == 0)
++ continue;
++ }
++#endif
++ adsContext->disable_pen_down_irq(sspContext);
++ /*
++ * We got an IRQ, which works us up. Process the touchscreen.
++ */
++ pen_down = ads_784x_Read_tsData(adsContext);
++ }
++
++ remove_wait_queue(&adsContext->irq_wait, &wait);
++ adsContext->rtask = NULL;
++ vdprintk("LEAVE: ads_784x_thread()\n");
++
++ return(0);
++}
++
++/**********************************************************************
++* Function: ads_784x_read
++*
++* ***********************************
++* *** User space driver interface ***
++* ***********************************
++**********************************************************************/
++static ssize_t ads_784x_read(struct file *filp, char *buffer, size_t _count, loff_t *ppos)
++{
++ DECLARE_WAITQUEUE(wait, current);
++ adsContext_t *adsContext = filp->private_data;
++ char *ptr = buffer;
++ int err = 0;
++ int count = (int)_count; /* Force a sigened value to be used */
++
++ vdprintk("ENTER: ads_784x_read()\n");
++ add_wait_queue(&adsContext->read_wait, &wait);
++ while (count >= sizeof(tsData_t)) {
++ err = -ERESTARTSYS;
++ if (signal_pending(current))
++ break;
++
++ if (ads_784x_tsData_pending(adsContext)) {
++ tsData_t *tsData = ads_784x_tsData_get(adsContext);
++
++ err = copy_to_user(ptr, tsData, sizeof(tsData_t));
++ ads_784x_tsData_pull(adsContext);
++
++ if (err)
++ break;
++#if 0
++ else
++ printk("ads_784x_read: P: %02X X: %4d Y: %4d\n",
++ tsData->pressure & 0x40, (tsData->xhigh << 8) + tsData->xlow, (tsData->yhigh << 8) + tsData->ylow);
++#endif
++
++ ptr += sizeof(tsData_t);
++ count -= sizeof(tsData_t);
++ continue;
++ }
++
++ set_current_state(TASK_INTERRUPTIBLE);
++ err = -EAGAIN;
++ if (filp->f_flags & O_NONBLOCK)
++ break;
++ schedule();
++ }
++ current->state = TASK_RUNNING;
++ remove_wait_queue(&adsContext->read_wait, &wait);
++ vdprintk("LEAVE: ads_784x_read()\n");
++
++ return(ptr == buffer ? err : ptr - buffer);
++}
++
++/**********************************************************************
++* Function: ads_784x_poll
++*
++* ***********************************
++* *** User space driver interface ***
++* ***********************************
++**********************************************************************/
++static unsigned int ads_784x_poll(struct file *filp, poll_table *wait)
++{
++ adsContext_t *adsContext = filp->private_data;
++ int ret = 0;
++
++ vdprintk("ENTER: ads_784x_poll()\n");
++ poll_wait(filp, &adsContext->read_wait, wait);
++ if (ads_784x_tsData_pending(adsContext))
++ ret = POLLIN | POLLRDNORM;
++ vdprintk("LEAVE: ads_784x_poll()\n");
++
++ return(ret);
++}
++
++/**********************************************************************
++* Function: ads_784x_open
++*
++* ***********************************
++* *** User space driver interface ***
++* ***********************************
++**********************************************************************/
++static int ads_784x_open(struct inode *inode, struct file *filp)
++{
++ adsContext_t *adsContext = &adsContext_l;
++ int ret = 0;
++
++ vdprintk("ENTER: ads_784x_open()\n");
++
++ filp->private_data = adsContext;
++
++ /* Flush the ts data queue here */
++ ads_784x_tsData_flush(adsContext);
++
++ vdprintk("LEAVE: ads_784x_open()\n");
++ return(ret);
++}
++
++/**********************************************************************
++* Function: ads_784x_fasync
++*
++* ***********************************
++* *** User space driver interface ***
++* ***********************************
++**********************************************************************/
++static int ads_784x_fasync(int fd, struct file *filp, int on)
++{
++ int sts;
++ adsContext_t *adsContext = filp->private_data;
++
++ vdprintk("ENTER: ads_784x_fasync()\n");
++ sts = fasync_helper(fd, filp, on, &adsContext->fasync);
++ vdprintk("LEAVE: ads_784x_fasync()\n");
++
++ return(sts);
++}
++
++/**********************************************************************
++* Function: ads_784x_release
++*
++* ***********************************
++* *** User space driver interface ***
++* ***********************************
++*
++* Release touchscreen resources. Disable IRQs.
++**********************************************************************/
++static int ads_784x_release(struct inode *inode, struct file *filp)
++{
++ // adsContext_t *adsContext = filp->private_data;
++
++ vdprintk("ENTER: ads_784x_release()\n");
++ lock_kernel();
++ ads_784x_fasync(-1, filp, 0);
++ unlock_kernel();
++ vdprintk("LEAVE: ads_784x_release()\n");
++
++ return(0);
++}
++
++/**********************************************************************
++* Define (fill in) the user space file operations for this driver
++* and initialize the ADS touchscreen driver as a "miscdevice":
++* Character device
++* Major(10) --- Non-serial mice, misc features
++* Minor(20) --- /dev/touchscreen/ads_784x
++**********************************************************************/
++static struct file_operations ads_784x_fops = {
++ owner: THIS_MODULE,
++ read: ads_784x_read,
++ poll: ads_784x_poll,
++ open: ads_784x_open,
++ fasync: ads_784x_fasync,
++ release: ads_784x_release,
++};
++
++static struct miscdevice ads_784x_dev = {
++ minor: 20,
++ name: "touchscreen/ads_784x",
++ fops: &ads_784x_fops,
++};
++
++#ifdef PROC_BATTERY
++/**********************************************************************
++* ads_784x_proc_battery_read
++**********************************************************************/
++static int ads_784x_proc_battery_read(char *buf, char **start, off_t offset,
++ int len, int *eof, void *unused)
++{
++ adsContext_t *adsContext = &adsContext_l;
++ void *ads784x_sspContext = adsContext->sspContext;
++ int milliVolts;
++ int volts;
++ int hundredthsVolts;
++ int sample;
++ int size;
++ int count;
++ int last_irq_state;
++
++ vdprintk("ENTER: ads_784x_proc_battery_read(len=%d)\n", len);
++ /*
++ * Reading the ADS784X takes the part out of pen down interrupt mode
++ * causing spurious pen down interrupts. So we must disable
++ * pen down interrupts while reading battery voltage.
++ */
++ last_irq_state = adsContext->disable_pen_down_irq(ads784x_sspContext);
++
++ /* Do a dummy read to turn on the internal reference voltage */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++
++ //FJB
++ adsContext->chipselect_enable();
++
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_BATTERY);
++ sample = adsContext->read(ads784x_sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ udelay(100); /* wait until the reference voltage settle */
++
++ sample = 0;
++ for (count = 0; count < 3; count++) {
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_BATTERY);
++ sample += adsContext->read(ads784x_sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ }
++ sample /= count;
++ milliVolts = (sample * 1000 * 10) / 4096;
++ volts = milliVolts / 1000;
++ hundredthsVolts = (milliVolts - (volts * 1000)) / 10;
++ size = sprintf(buf, "battery: %i %i.%02iV\n", sample, volts, hundredthsVolts);
++
++ /* Do a dummy read to turn off the internal reference voltage */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_X);
++ sample = adsContext->read(ads784x_sspContext);
++
++ //FJB
++ adsContext->chipselect_disable();
++
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++
++ /* Restore the interrupt enable state */
++ if (last_irq_state) {
++ udelay(100); /* Wait until the pen down interrupt settles */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->enable_pen_down_irq(ads784x_sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ }
++ vdprintk("LEAVE: ads_784x_proc_battery_read(len=%d)\n", len);
++
++ return(size);
++}
++#endif
++
++#ifdef PROC_TEMPERATURE
++/**********************************************************************
++* ads_784x_proc_temperature_read
++**********************************************************************/
++static int ads_784x_proc_temperature_read(char *buf, char **start,
++ off_t offset, int len, int *eof, void *unused)
++{
++ adsContext_t *adsContext = &adsContext_l;
++ void *ads784x_sspContext = adsContext->sspContext;
++ int size;
++ int count;
++ int C10, F10;
++ int sample1;
++ int sample91;
++ int last_irq_state;
++
++ vdprintk("ENTER: ads_784x_proc_temperature_read(len=%d)\n", len);
++ /*
++ * Reading the ADS784X takes the part out of pen down interrupt mode
++ * causing spurious pen down interrupts. So we must disable
++ * pen down interrupts while reading temperature.
++ */
++ last_irq_state = adsContext->disable_pen_down_irq(ads784x_sspContext);
++
++ /* do a dummy read to turn on the internal reference voltage */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++
++ //FJB
++ adsContext->chipselect_enable();
++
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_TEMP0);
++ sample1 = adsContext->read(ads784x_sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ udelay(100); /* wait until the reference voltage settle */
++
++ sample1 = 0;
++ sample91 = 0;
++ /* read the temperature values */
++ for (count = 0; count < 3; count++) {
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_TEMP0);
++ sample1 += adsContext->read(ads784x_sspContext);
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_TEMP1);
++ sample91 += adsContext->read(ads784x_sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ }
++ /* average values */
++ sample1 /= count;
++ sample91 /= count;
++
++ C10 = (((sample91 - sample1) * (25 * 2573)) / 4095) - 2730;
++ F10 = (C10*9)/5 + 320;
++
++ size = sprintf(buf, "Temperature: %iC, %iF\n", (C10+5)/10, (F10+5)/10);
++
++ /* do a dummy read to turn off the internal reference voltage */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->write(ads784x_sspContext, ADS_784x_READ_X);
++ sample1 = adsContext->read(ads784x_sspContext);
++
++ //FJB
++ adsContext->chipselect_disable();
++
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++
++ /* restore the interrupt enable state */
++ if (last_irq_state) {
++ udelay(100); /* wait until the pen down interrupt settles */
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->enable_pen_down_irq(ads784x_sspContext);
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(ads784x_sspContext, SSP_DEV_TOUCHSCREEN);
++ }
++ vdprintk("LEAVE: ads_784x_proc_temperature_read(len=%d)\n", len);
++
++ return(size);
++}
++#endif
++
++/**********************************************************************
++* Function: ads_784x_make_ssp_association
++*
++* Purpose:
++* Make the association between the eeprom driver and the ssp driver
++**********************************************************************/
++static int ads_784x__make_ssp_association(adsContext_t *adsContext)
++{
++ int sts = 0;
++ void *vp;
++
++/* NOTE: -EOPNOTSUPP == Operation not supported on transport endpoint */
++#define ASSOCIATION_ERROR -EOPNOTSUPP
++
++ dprintk("ENTER: ads_784x_make_ssp_association()\n");
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "sspContext");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->sspContext = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "write");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->write = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "read");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->read = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "enable_pen_down_irq");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->enable_pen_down_irq = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "disable_pen_down_irq");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->disable_pen_down_irq = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "is_pen_down");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->is_pen_down = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "lock");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->lock = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "unlock");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->unlock = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "chipselect_enable");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->chipselect_enable = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "chipselect_disable");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->chipselect_disable = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_TOUCHSCREEN, "chipselect_manual");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ adsContext->chipselect_manual = vp;
++
++ /* Note: The following need reset to NULL when we are finished */
++
++ vp = ssp_provide_pointer(SSP_DEV_TOUCHSCREEN, "irq_wait_ptr",
++ &(adsContext->irq_wait));
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++
++ dprintk("LEAVE: ads_784x_make_ssp_association(%d)\n", sts);
++
++ return(sts);
++}
++
++/**********************************************************************
++* Function: ads_784x_init
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++static int __init ads_784x_init(void)
++{
++ adsContext_t *adsContext = &adsContext_l;
++ int sts = -ENODEV;
++
++ vdprintk("ENTER: ads_784x_init()\n");
++ init_waitqueue_head(&adsContext->read_wait);
++ /* Retrieve the service information from the SSP driver */
++ sts = ads_784x__make_ssp_association(adsContext);
++ if (sts == 0) {
++ void *sspContext = adsContext->sspContext;
++
++ /* Start the ADS polling thread */
++ lock_kernel();
++ if (adsContext->rtask == NULL) {
++ init_completion(&adsContext->complete);
++ init_waitqueue_head(&adsContext->irq_wait);
++ sts = kernel_thread(ads_784x_thread, adsContext,
++ CLONE_FS | CLONE_FILES);
++ if (sts >= 0) {
++ sts = 0;
++ /* Only do this is the tread started correctly */
++ wait_for_completion(&adsContext->complete);
++ }
++ }
++ unlock_kernel();
++
++ /* MUST lock the SSP before accessing it */
++ adsContext->lock(sspContext, SSP_DEV_TOUCHSCREEN);
++ adsContext->chipselect_manual();
++ adsContext->write(sspContext, ADS_784x_INIT);
++ adsContext->read(sspContext); /* dummy read */
++ /* MUST unlock the SSP after it has been locked */
++ adsContext->unlock(sspContext, SSP_DEV_TOUCHSCREEN);
++
++ sts = misc_register(&ads_784x_dev);
++
++#ifdef PROC_BATTERY
++ ads_784x_proc_battery = create_proc_entry("battery", 0, 0);
++ if (ads_784x_proc_battery) {
++ ads_784x_proc_battery->read_proc = ads_784x_proc_battery_read;
++ } else {
++ printk(KERN_ERR "%s: unable to register /proc/battery\n", DRVNAME);
++ }
++#endif
++#ifdef PROC_TEMPERATURE
++ ads_784x_proc_temperature = create_proc_entry("temperature", 0, 0);
++ if (ads_784x_proc_temperature) {
++ ads_784x_proc_temperature->read_proc = ads_784x_proc_temperature_read;
++ } else {
++ printk(KERN_ERR "%s: unable to register /proc/temperature\n", DRVNAME);
++ }
++#endif
++ }
++
++ vdprintk("LEAVE: ads_784x_init()\n");
++ return(sts);
++}
++
++/**********************************************************************
++* Function: ads_784x_exit
++*
++* Purpose:
++* Un-Register & Cleanup the module
++**********************************************************************/
++static void ads_784x_exit(void)
++{
++ adsContext_t *adsContext = &adsContext_l;
++
++ vdprintk("ENTER: ads_784x_exit()\n");
++
++ if (adsContext->rtask) {
++ send_sig(SIGKILL, adsContext->rtask, 1);
++ schedule();
++ }
++
++ vdprintk("ads_784x_exit(): misc_deregister()\n");
++ misc_deregister(&ads_784x_dev);
++
++ /* Back out the pointer(s) we gave to the SSP driver */
++ (void) ssp_provide_pointer(SSP_DEV_TOUCHSCREEN, "irq_wait_ptr", NULL);
++
++#ifdef PROC_BATTERY
++ remove_proc_entry("battery", NULL);
++#endif
++#ifdef PROC_TEMPERATURE
++ remove_proc_entry("temperature", NULL);
++#endif
++
++ vdprintk("LEAVE: ads_784x_exit()\n");
++
++ return;
++}
++
++module_init(ads_784x_init);
++module_exit(ads_784x_exit);
++
++MODULE_AUTHOR("Jim Gleason");
++MODULE_DESCRIPTION("ADS 784x Driver for Sharp LH7x EVB");
++MODULE_LICENSE("Copyright (c) 2002 Lineo, Inc.");
++
+diff -urN linux-2.4.26/drivers/misc/Config.in linux-2.4.26-vrs1-lnode80/drivers/misc/Config.in
+--- linux-2.4.26/drivers/misc/Config.in 2005-11-02 16:54:22.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/Config.in 2005-11-02 17:37:31.000000000 -0400
+@@ -15,3 +15,14 @@
+ dep_tristate ' Touchscreen interface support' CONFIG_MCP_UCB1200_TS $CONFIG_MCP_UCB1200
+
+ endmenu
++mainmenu_option next_comment
++
++comment 'Misc devices'
++
++if [ "$CONFIG_ARCH_LH79520" = "y" ]; then
++ tristate 'LH79590 touchscreen support' CONFIG_TOUCHSCREEN_LH79520
++ tristate 'LH79590 serial eeprom support' CONFIG_EEPROM_LH79520
++ tristate 'LH79590 7-segment support' CONFIG_7SEGMENT_LH79520
++fi
++
++endmenu
+diff -urN linux-2.4.26/drivers/misc/eeprom-lh7x.c linux-2.4.26-vrs1-lnode80/drivers/misc/eeprom-lh7x.c
+--- linux-2.4.26/drivers/misc/eeprom-lh7x.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/eeprom-lh7x.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,709 @@
++/* vi: set sw=4 ts=4 ai: */
++
++// #define MODULE
++
++#define READ_AFTER_WRITE
++
++/**********************************************************************
++* linux/drivers/misc/eeprom-lh79x.c
++*
++* Provide Microchip 93LC46B 64 x 16 EEPROM access for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++* References:
++* SHARP_EVB_DISPLAY_BOARD_REV2.pdf
++* 93LC46.pdf (Microchip 1K Microwire(R) EEPROM chip spec)
++*
++**********************************************************************/
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/fs.h>
++#include <linux/proc_fs.h>
++#include <linux/smp_lock.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/delay.h>
++
++#undef DEBUG
++#undef VERBOSE
++#define DRVNAME "eeprom-lh79x"
++#include <linux/verbosedebug.h>
++
++#include <linux/version.h>
++#ifdef MODULE
++char kernel_version[] = UTS_RELEASE;
++#endif /* MODULE */
++
++#include <asm/arch/hardware.h>
++
++#include "ssp.h"
++
++#define SIXmsJIFFIES (((HZ*6)/1000)+2)
++
++/**********************************************************************
++* Define EEPROM Control macros for "Microchip 93LC46B Microwire Serial EEPROM"
++**********************************************************************/
++
++/* Erase one 16 bit word at addr */
++#define EEPROM_ERASE(addr) (0x01C0 | (addr & 0x3F))
++/* Erase entire eeprom */
++#define EEPROM_ERAL() (0x0120)
++/* Erase/Write disable */
++#define EEPROM_EWDS() (0x0100)
++/* Erase/Write enable */
++#define EEPROM_EWEN() (0x0130)
++/* Read one 16 bit word at addr */
++#define EEPROM_READ(addr) (0x0180 | (addr & 0x3F))
++/* (Erase and) Write one 16 bit word at addr */
++#define EEPROM_WRITE(addr) (0x0140 | (addr & 0x3F))
++/* Write one 16 bit value throught entire eeprom */
++#define EEPROM_WRAL() (0x0110)
++
++/**********************************************************************
++* Define our eeprom context structure
++**********************************************************************/
++
++#define EEPROM_SIZE_16BIT 64
++#define EEPROM_SIZE_8BIT 128
++
++typedef struct eepromContext_t eepromContext_t;
++struct eepromContext_t {
++ union {
++ uint16_t w[EEPROM_SIZE_16BIT]; /* Actual device size */
++ u_char c[EEPROM_SIZE_8BIT];
++ } cache;
++ union {
++ uint16_t w[EEPROM_SIZE_16BIT]; /* Actual device size */
++ u_char c[EEPROM_SIZE_8BIT];
++ } state;
++ wait_queue_head_t read_and_write_wait;
++
++ void *sspContext;
++ void (*write) (void *sspContext, unsigned int data);
++ unsigned int (*read) (void *sspContext);
++ int (*lock)(void *sspContext, int device);
++ int (*unlock)(void *sspContext, int device);
++ void (*ssp_chipselect_automatic)(void);
++ void (*ssp_chipselect_manual)(void);
++ void (*ssp_chipselect_enable)(void);
++ void (*ssp_chipselect_disable)(void);
++ void (*ssp_flush_tx_fifo)(void *sspContext);
++ void (*ssp_flush_rx_fifo)(void *sspContext);
++ void (*ssp_busy_wait)(void);
++};
++static eepromContext_t eepromContext_l;
++
++#define CACHE_STATE_VALID_8 0x01
++#define CACHE_STATE_MODIFIED_8 0x02
++
++#define CACHE_STATE_VALID_16 0x0101
++#define CACHE_STATE_MODIFIED_16 0x0202
++
++/**********************************************************************
++* Function: eeprom_lh79x_erase_write_enable
++* Function: eeprom_lh79x_erase_write_disable
++**********************************************************************/
++static void
++eeprom_lh79x_erase_write_enable(eepromContext_t *eepromContext)
++{
++ void *sspContext = eepromContext->sspContext;
++
++ /* Lock the SSP before accessing it */
++ eepromContext->lock(sspContext, SSP_DEV_EEPROM);
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* EEPROM Writes must be done using manual control of the ChipSelect */
++ eepromContext->ssp_chipselect_manual();
++ eepromContext->ssp_chipselect_enable();
++
++ eepromContext->write(sspContext, EEPROM_EWEN()); /* Enable Erase/Write */
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* Reset back to automatic control of the EEPROM ChipSelect */
++ eepromContext->ssp_chipselect_disable();
++ eepromContext->ssp_chipselect_automatic();
++
++ /* Unlock the SSP after it has been locked */
++ eepromContext->unlock(sspContext, SSP_DEV_EEPROM);
++
++ return;
++}
++
++static void
++eeprom_lh79x_erase_write_disable(eepromContext_t *eepromContext)
++{
++ void *sspContext = eepromContext->sspContext;
++
++ /* Lock the SSP before accessing it */
++ eepromContext->lock(sspContext, SSP_DEV_EEPROM);
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* EEPROM Writes must be done using manual control of the ChipSelect */
++ eepromContext->ssp_chipselect_manual();
++ eepromContext->ssp_chipselect_enable();
++
++ eepromContext->write(sspContext, EEPROM_EWDS()); /* Disable Erase/Write */
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* Reset back to automatic control of the EEPROM ChipSelect */
++ eepromContext->ssp_chipselect_disable();
++ eepromContext->ssp_chipselect_automatic();
++
++ /* Unlock the SSP after it has been locked */
++ eepromContext->unlock(sspContext, SSP_DEV_EEPROM);
++
++ return;
++}
++
++/**********************************************************************
++* Function: eeprom_lh79x_read_device_word
++**********************************************************************/
++static void
++eeprom_lh79x_read_device_word(eepromContext_t *eepromContext, int offset_w)
++{
++ void *sspContext = eepromContext->sspContext;
++ uint16_t word = 0;
++
++ /* Lock the SSP before accessing it */
++ eepromContext->lock(sspContext, SSP_DEV_EEPROM);
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* EEPROM Reads must be done using manual control of the ChipSelect */
++ eepromContext->ssp_chipselect_manual();
++ eepromContext->ssp_chipselect_enable();
++
++ /* Read eeprom into cache */
++ /* Note: We shift to take care of the "dummy 0" the eeprom sends */
++ eepromContext->write(sspContext, (EEPROM_READ(offset_w))<<1);
++ /* Following is a Dummy/Invalid command to allow the eeprom to be read */
++ eepromContext->write(sspContext, 0);
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ word = eepromContext->read(sspContext); /* Dummy Word */
++ word = eepromContext->read(sspContext); /* Real Word */
++
++ /* Reset back to automatic control of the EEPROM ChipSelect */
++ eepromContext->ssp_chipselect_disable();
++ eepromContext->ssp_chipselect_automatic();
++
++ /* Unlock the SSP after it has been locked */
++ eepromContext->unlock(sspContext, SSP_DEV_EEPROM);
++
++ /* Modify the state of the cache data */
++ eepromContext->cache.w[offset_w] = word;
++ eepromContext->state.w[offset_w] |= CACHE_STATE_VALID_16;
++
++ schedule(); /* Give the rest of the system a chance to work */
++
++ return;
++}
++
++/**********************************************************************
++* Function: eeprom_lh79x_write_device_word
++**********************************************************************/
++static void
++eeprom_lh79x_write_device_word(eepromContext_t *eepromContext, int offset_w)
++{
++ void *sspContext = eepromContext->sspContext;
++ uint16_t word;
++ long timeoutJiffies;
++
++ /* Get the modified cache data to write to the eeprom */
++ word = eepromContext->cache.w[offset_w];
++
++ /* Lock the SSP before accessing it */
++ eepromContext->lock(sspContext, SSP_DEV_EEPROM);
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* EEPROM Writes must be done using manual control of the ChipSelect */
++ eepromContext->ssp_chipselect_manual();
++ eepromContext->ssp_chipselect_enable();
++
++ /* Write modified cache data to the eeprom */
++ eepromContext->write(sspContext, EEPROM_WRITE(offset_w));
++ eepromContext->write(sspContext, word);
++
++ /* Reset back to automatic control of the EEPROM ChipSelect */
++ eepromContext->ssp_chipselect_disable();
++ eepromContext->ssp_chipselect_automatic();
++
++ eepromContext->ssp_busy_wait(); /* Wait for the SSP to not be busy */
++ eepromContext->ssp_flush_rx_fifo(sspContext);
++
++ /* Unlock the SSP after it has been locked */
++ eepromContext->unlock(sspContext, SSP_DEV_EEPROM);
++
++ /* Modify the state of the cache data */
++ eepromContext->state.w[offset_w] &= ~CACHE_STATE_MODIFIED_16;
++
++#ifdef READ_AFTER_WRITE
++ /* Force the modified cache data to be reread from the eeprom */
++ eepromContext->state.w[offset_w] &= ~CACHE_STATE_VALID_16;
++#endif /* READ_AFTER_WRITE */
++
++ /* Cause ~ 6ms delay (actually does 10 on the Sharp LH79520) */
++ timeoutJiffies = SIXmsJIFFIES;
++ while (timeoutJiffies > 0) {
++ __set_current_state(TASK_UNINTERRUPTIBLE);
++ timeoutJiffies = schedule_timeout(timeoutJiffies);
++ }
++ // __set_current_state(TASK_RUNNING);
++
++ schedule(); /* Give the rest of the system a chance to work */
++
++ return;
++}
++
++/**********************************************************************
++* Function: eeprom_lh79x_read_device
++**********************************************************************/
++static void
++eeprom_lh79x_read_device(eepromContext_t *eepromContext)
++{
++ uint16_t *scwp;
++ int offset_w;
++
++ scwp = eepromContext->state.w;
++ for (offset_w = 0; offset_w < EEPROM_SIZE_16BIT; offset_w++) {
++ if ((*scwp & CACHE_STATE_VALID_16) != CACHE_STATE_VALID_16) {
++ eeprom_lh79x_read_device_word(eepromContext, offset_w);
++ }
++ scwp++;
++ }
++
++ return;
++}
++
++/**********************************************************************
++* Function: eeprom_lh79x_write_device
++**********************************************************************/
++static void
++eeprom_lh79x_write_device(eepromContext_t *eepromContext)
++{
++ uint16_t *scwp;
++ int offset_w;
++ int timeoutJiffies;
++
++ /* Enable erase/write of the eeprom */
++ eeprom_lh79x_erase_write_enable(eepromContext);
++
++ /* Just to get the timeouts in a desirable sequence */
++ /* and so we don't get a "partial" timeout we do the following... */
++ /* Cause ~ 6ms delay (actually does 10 on the Sharp LH79520) */
++ timeoutJiffies = SIXmsJIFFIES;
++ while (timeoutJiffies > 0) {
++ __set_current_state(TASK_UNINTERRUPTIBLE);
++ timeoutJiffies = schedule_timeout(timeoutJiffies);
++ }
++ // __set_current_state(TASK_RUNNING);
++
++ scwp = eepromContext->state.w;
++ for (offset_w = 0; offset_w < EEPROM_SIZE_16BIT; offset_w++) {
++ if (*scwp & CACHE_STATE_MODIFIED_16) {
++ eeprom_lh79x_write_device_word(eepromContext, offset_w);
++ }
++ scwp++;
++ }
++
++ /* Disable erase/write of the eeprom */
++ eeprom_lh79x_erase_write_disable(eepromContext);
++
++#ifdef READ_AFTER_WRITE
++ /*
++ * NOW ... Update the eeprom cache.
++ * ( Read the actual contents of the eeprom that were
++ * modified instead of relying on what we wrote. )
++ */
++ eeprom_lh79x_read_device(eepromContext);
++#endif /* READ_AFTER_WRITE */
++
++ return;
++}
++
++/**********************************************************************
++* *****************************************************
++* *** User space "file operation" driver interfaces ***
++* *****************************************************
++* Function: lh79x_eeprom_llseek
++* Function: lh79x_eeprom_read
++* Function: lh79x_eeprom_write
++* Function: lh79x_eeprom_poll ( NOT USED --- YET )
++* Function: lh79x_eeprom_ioctl ( NOT USED --- YET )
++* Function: lh79x_eeprom_open
++* Function: lh79x_eeprom_flush ( NOT USED --- YET )
++* Function: lh79x_eeprom_release ( NOT USED --- YET )
++* Function: lh79x_eeprom_fsync ( NOT USED --- YET )
++* Function: lh79x_eeprom_fasync ( NOT USED --- YET )
++* Function: lh79x_eeprom_lock ( NOT USED --- YET )
++**********************************************************************/
++
++static loff_t
++lh79x_eeprom_llseek(struct file *filp, loff_t offset, int origin)
++{
++ // eepromContext_t *eepromContext = filp->private_data;
++ loff_t new_offset = -EINVAL;
++
++ switch (origin) {
++ case 0: /* SEEK_SET == 0, Offset from the start */
++ new_offset = offset;
++ break;
++ case 1: /* SEEK_CUR == 1, Offset from the current position */
++ new_offset = filp->f_pos + offset;
++ break;
++ case 2: /* SEEK_END == 2, Offset from the end */
++ new_offset = EEPROM_SIZE_8BIT - offset;
++ break;
++ }
++ if ((new_offset < 0) || (new_offset > EEPROM_SIZE_8BIT)) {
++ new_offset = -EINVAL;
++ } else {
++ filp->f_pos = new_offset;
++ }
++
++ return(new_offset);
++}
++
++static ssize_t
++lh79x_eeprom_read(struct file *filp, char *buffer,
++ size_t count, loff_t *offsetp)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++ int err;
++
++ vdprintk("ENTER: lh79x_eeprom_read(%d:%d)\n", *offsetp, count);
++ /* Ensure we still have data to read (relative to the offset we are at) */
++ if (*offsetp < EEPROM_SIZE_8BIT) {
++ /* Adjust the size to be read if necessary */
++ if ((*offsetp + count) > EEPROM_SIZE_8BIT) {
++ count = EEPROM_SIZE_8BIT - *offsetp;
++ }
++ /* Ensure the eeprom cache is valid */
++ eeprom_lh79x_read_device(eepromContext);
++ /* Return the contents of the eeprom cache */
++ err = copy_to_user(buffer, &eepromContext->cache.c[*offsetp], count);
++ if ( ! err) {
++ *offsetp += count;
++ sts = count;
++ } else {
++ sts = -EFAULT;
++ }
++ }
++ vdprintk("LEAVE: lh79x_eeprom_read(%d)\n", sts);
++
++ return(sts);
++}
++
++static ssize_t
++lh79x_eeprom_write(struct file *filp, const char *buffer,
++ size_t count, loff_t *offsetp)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ u_char newcache_c[EEPROM_SIZE_8BIT];
++ int sts = 0;
++ int err;
++
++ vdprintk("ENTER: lh79x_eeprom_write(%d:%d)\n", *offsetp, count);
++ /* Ensure we still have room to write (relative to the offset we are at) */
++ if (*offsetp < EEPROM_SIZE_8BIT) {
++ /* Adjust the size to be written if necessary */
++ if ((*offsetp + count) > EEPROM_SIZE_8BIT) {
++ count = EEPROM_SIZE_8BIT - *offsetp;
++ }
++ /* Ensure the eeprom cache is valid to start with */
++ eeprom_lh79x_read_device(eepromContext);
++ /* Get the new contents of the eeprom cache */
++ err = copy_from_user(&newcache_c[*offsetp], buffer, count);
++ if ( ! err) {
++ u_char *ccp, *nccp, *sccp;
++ int i;
++ /*
++ * Transfer the new cache contents into the cache
++ * marking what has changed.
++ */
++ ccp = &eepromContext->cache.c[*offsetp];
++ nccp = &newcache_c[*offsetp];
++ sccp = &eepromContext->state.c[*offsetp];
++ for (i = 0; i < count; i++) {
++ if (*ccp != *nccp) {
++ *ccp = *nccp;
++ *sccp |= CACHE_STATE_MODIFIED_8;
++ }
++ ccp++;
++ nccp++;
++ sccp++;
++ }
++ /* Write the modified cache into the eeprom */
++ eeprom_lh79x_write_device(eepromContext);
++ *offsetp += count;
++ sts = count;
++ } else {
++ sts = -EFAULT;
++ }
++ }
++ vdprintk("LEAVE: lh79x_eeprom_write(%d)\n", sts);
++
++ return(sts);
++}
++
++#if (0) /* NOT USED --- YET */
++static unsigned int
++lh79x_eeprom_poll(struct file *filp, struct poll_table_struct *wait)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++#if (0) /* NOT USED --- YET */
++static int
++lh79x_eeprom_ioctl(struct inode *, struct file *filp, unsigned int cmd, unsigned long arg)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++static int
++lh79x_eeprom_open(struct inode *inode, struct file *filp)
++{
++ eepromContext_t *eepromContext = &eepromContext_l;
++ int sts = 0;
++
++ filp->private_data = eepromContext;
++
++ return(sts);
++}
++
++#if (0) /* NOT USED --- YET */
++static int
++lh79x_eeprom_flush(struct file *filp)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++#if (0) /* NOT USED --- YET */
++static int
++lh79x_eeprom_release(struct inode *inode, struct file *filp)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++#if (0) /* NOT USED --- YET */
++static int
++lh79x_eeprom_fsync(struct file *filp, struct dentry *dentry, int datasync)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++#if (0) /* NOT USED --- YET */
++static int
++lh79x_eeprom_fasync(int fd, struct file *filp, int on)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++#if (0) /* NOT USED --- YET */
++static int
++lh79x_eeprom_lock(struct file *filp, int XXX, struct file_lock *file_lock)
++{
++ eepromContext_t *eepromContext = filp->private_data;
++ int sts = 0;
++
++ return(sts);
++}
++#endif /* NOT USED --- YET */
++
++/**********************************************************************
++* Define (fill in) the user space file operations for this driver
++* and initialize the eeprom driver as a "miscdevice":
++* Character device
++* Major(10) --- Non-serial mice, misc features
++* Minor(22) --- /dev/eeprom ( Microchip 93LC46B 64 x 16 EEPROM )
++**********************************************************************/
++static struct file_operations lh79x_eeprom_fops = {
++ owner: THIS_MODULE,
++ llseek: lh79x_eeprom_llseek,
++ read: lh79x_eeprom_read,
++ write: lh79x_eeprom_write,
++// poll: lh79x_eeprom_poll,
++// ioctl: lh79x_eeprom_ioctl,
++ open: lh79x_eeprom_open,
++// flush: lh79x_eeprom_flush,
++// release: lh79x_eeprom_release,
++// fsync: lh79x_eeprom_fsync,
++// fasync: lh79x_eeprom_fasync,
++// lock: lh79x_eeprom_lock,
++};
++
++static struct miscdevice lh79x_eeprom_dev = {
++minor: 22,
++name: "eeprom",
++fops: &lh79x_eeprom_fops,
++};
++
++/**********************************************************************
++* Function: lh79x_eeprom_make_ssp_association
++*
++* Purpose:
++* Make the association between the eeprom driver and the ssp driver
++**********************************************************************/
++static int lh79x_eeprom_make_ssp_association(eepromContext_t *eepromContext)
++{
++ int sts = 0;
++ void *vp;
++
++/* NOTE: -EOPNOTSUPP == Operation not supported on transport endpoint */
++#define ASSOCIATION_ERROR -EOPNOTSUPP
++
++ dprintk("ENTER: lh79x_eeprom_make_ssp_association()\n");
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "sspContext");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->sspContext = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "write");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->write = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "read");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->read = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "lock");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->lock = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "unlock");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->unlock = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "chipselect_enable");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_chipselect_enable = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "chipselect_disable");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_chipselect_disable = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "chipselect_manual");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_chipselect_manual = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "chipselect_automatic");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_chipselect_automatic = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "flush_tx_fifo");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_flush_tx_fifo = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "flush_rx_fifo");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_flush_rx_fifo = vp;
++
++ vp = ssp_request_pointer(SSP_DEV_EEPROM, "ssp_busy_wait");
++ if ( ! vp )
++ sts = ASSOCIATION_ERROR;
++ eepromContext->ssp_busy_wait = vp;
++
++ dprintk("LEAVE: lh79x_eeprom_make_ssp_association(%d)\n", sts);
++
++ return(sts);
++}
++
++/**********************************************************************
++* Function: lh79x_eeprom_init
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++static int lh79x_eeprom_init(void)
++{
++ eepromContext_t *eepromContext = &eepromContext_l;
++ int sts = 0;
++ dprintk("ENTER: lh79x_eeprom_init()\n");
++ init_waitqueue_head(&eepromContext->read_and_write_wait);
++ /* Retrieve the service information from the SSP driver */
++ sts = lh79x_eeprom_make_ssp_association(eepromContext);
++ if (sts == 0) {
++ /* Ensure the eeprom cache is valid */
++ eeprom_lh79x_read_device(eepromContext);
++ sts = misc_register(&lh79x_eeprom_dev);
++ }
++ dprintk("LEAVE: lh79x_eeprom_init(%d)\n", sts);
++ return(sts);
++}
++
++/**********************************************************************
++* Function: lh79x_eeprom_exit
++*
++* Purpose:
++* Un-Register & Cleanup the module
++**********************************************************************/
++static void lh79x_eeprom_exit(void)
++{
++ dprintk("ENTER: lh79x_eeprom_exit()\n");
++ misc_deregister(&lh79x_eeprom_dev);
++ dprintk("LEAVE: lh79x_eeprom_exit()\n");
++ return;
++}
++
++module_init(lh79x_eeprom_init);
++module_exit(lh79x_eeprom_exit);
++
++MODULE_AUTHOR("Jim Gleason / Lineo, Inc.");
++MODULE_DESCRIPTION("Microchip 93LC46B 64 x 16 EEPROM access for LH7x EVB");
++MODULE_LICENSE("Copyright (c) 2002 Lineo, Inc.");
++
+diff -urN linux-2.4.26/drivers/misc/lh7x-7seg.c linux-2.4.26-vrs1-lnode80/drivers/misc/lh7x-7seg.c
+--- linux-2.4.26/drivers/misc/lh7x-7seg.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/lh7x-7seg.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,649 @@
++/* vi: set sw=4 ts=4 ai: */
++
++//#define MODULE
++
++/**********************************************************************
++* linux/drivers/misc/lh7x-7seg.c
++*
++* Provide ADS_784x 7-Segment access for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++/**********************************************************************
++* To light up the 7-segment display, write a 16-bit value to
++*
++* cpld->seven_seg.
++*
++* The high-order byte is the most significant 7-segment digit,
++* and the low-order byte is the lsb.
++*
++* NOTE: The 7-segment display bars are bit-mapped.
++* NOTE: The 7-segment display bars are ACTIVE LOW.
++*
++* _ == a
++* | | == f b
++* - == g
++* | | == e c
++* -. == d dot
++*
++* a 0x01
++* b 0x02
++* c 0x04
++* d 0x08
++* e 0x10
++* f 0x20
++* g 0x40
++* dot 0x80 (also known as dp)
++*
++* The data to write looks like this:
++*
++* static u_char lednum[] =
++* { 0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, // 0-7
++* 0x80, 0x98, 0x88, 0x83, 0xC6, 0xA1, 0x86, 0x8E, // 8-F
++* 0xBF, // hyphen
++* 0xFF, // (blank)
++* };
++*
++* SO - to make "7F" show up, do this:
++*
++* cpld->seven_seg = 0xf88e;
++*
++* NOTE: When read, the 7-segment display does not return valid data.
++*
++**********************************************************************/
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/fs.h>
++#include <linux/proc_fs.h>
++#include <linux/smp_lock.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++
++#undef DEBUG
++#undef VERBOSE
++#define DRVNAME "lh7x-7seg"
++#include <linux/verbosedebug.h>
++
++#include <linux/version.h>
++#ifdef MODULE
++char kernel_version[] = UTS_RELEASE;
++#endif /* MODULE */
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/cpld.h>
++#include <asm/arch/lh7x-7seg.h>
++
++static cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++/**********************************************************************
++* Define our Seven Segment context structure
++**********************************************************************/
++typedef struct sevenSegmentContext_t sevenSegmentContext_t;
++struct sevenSegmentContext_t {
++ struct fasync_struct *fasync;
++ wait_queue_head_t read_and_write_wait;
++
++ int inEscape; /* 1 == We are in an escape sequence, 0 == NOT */
++ int accessMode; /* See ACCESSMODE_xxx definitions below */
++ int rawData; /* Raw == 1, Cooked == 0 */
++ uint16_t currentRawVal;
++};
++static sevenSegmentContext_t sevenSegmentContext_l;
++
++#define ESCAPE 27
++
++#define ACCESSMODE_SHIFT 0
++#define ACCESSMODE_LSB 1
++#define ACCESSMODE_MSB 2
++#define ACCESSMODE_DAFAULT ACCESSMODE_SHIFT
++
++/**********************************************************************
++* Define our Seven Segment Data
++**********************************************************************/
++
++typedef struct sevenSegmentData_t sevenSegmentData_t;
++struct sevenSegmentData_t {
++ int val;
++ u_char raw_val;
++};
++
++#define SSD_BLANK ((u_char)~(0x00))
++
++static sevenSegmentData_t sevenSegmentData[] = {
++ {'0', (u_char)~(SSD_A | SSD_B | SSD_C | SSD_D | SSD_E | SSD_F) },
++ {'1', (u_char)~(SSD_B | SSD_C) },
++ {'2', (u_char)~(SSD_A | SSD_B | SSD_G | SSD_E | SSD_D) },
++ {'3', (u_char)~(SSD_A | SSD_B | SSD_G | SSD_C | SSD_D) },
++ {'4', (u_char)~(SSD_F | SSD_G | SSD_B | SSD_C) },
++ {'5', (u_char)~(SSD_A | SSD_F | SSD_G | SSD_C | SSD_D) },
++ {'6', (u_char)~(SSD_A | SSD_F | SSD_E | SSD_D | SSD_C | SSD_G) },
++ {'7', (u_char)~(SSD_A | SSD_B | SSD_C) },
++ {'8', (u_char)~(SSD_A | SSD_B | SSD_C | SSD_D | SSD_E | SSD_F | SSD_G) },
++ {'9', (u_char)~(SSD_G | SSD_F | SSD_A | SSD_B | SSD_C) },
++ {'A', (u_char)~(SSD_E | SSD_F | SSD_A | SSD_B | SSD_C | SSD_G) },
++ {'a', (u_char)~(SSD_E | SSD_F | SSD_A | SSD_B | SSD_C | SSD_G) },
++ {'B', (u_char)~(SSD_F | SSD_E | SSD_D | SSD_C | SSD_G) },
++ {'b', (u_char)~(SSD_F | SSD_E | SSD_D | SSD_C | SSD_G) },
++ {'C', (u_char)~(SSD_A | SSD_F | SSD_E | SSD_D) },
++ {'c', (u_char)~(SSD_A | SSD_F | SSD_E | SSD_D) },
++ {'D', (u_char)~(SSD_B | SSD_C | SSD_D | SSD_E | SSD_G) },
++ {'d', (u_char)~(SSD_B | SSD_C | SSD_D | SSD_E | SSD_G) },
++ {'E', (u_char)~(SSD_A | SSD_F | SSD_G | SSD_E | SSD_D) },
++ {'e', (u_char)~(SSD_A | SSD_F | SSD_G | SSD_E | SSD_D) },
++ {'F', (u_char)~(SSD_A | SSD_F | SSD_G | SSD_E) },
++ {'f', (u_char)~(SSD_A | SSD_F | SSD_G | SSD_E) },
++ {'H', (u_char)~(SSD_F | SSD_E | SSD_G | SSD_B | SSD_C) },
++ {'h', (u_char)~(SSD_F | SSD_E | SSD_G | SSD_B | SSD_C) },
++ {'I', (u_char)~(SSD_F | SSD_E) },
++ {'i', (u_char)~(SSD_F | SSD_E) },
++ {'Y', (u_char)~(SSD_F | SSD_G | SSD_B | SSD_C | SSD_D) },
++ {'y', (u_char)~(SSD_F | SSD_G | SSD_B | SSD_C | SSD_D) },
++ {'-', (u_char)~(SSD_G) },
++ {'_', (u_char)~(SSD_D) },
++ {'.', (u_char)~(SSD_DOT) },
++ {' ', SSD_BLANK },
++ {0x00, SSD_BLANK },
++ { -1, (u_char)~(0x00) } /* End Of Data --- Must Be Last */
++};
++
++/**********************************************************************
++* Function: val_to_raw_val
++**********************************************************************/
++static u_char val_to_raw_val(u_char val)
++{
++ sevenSegmentData_t *data;
++ u_char raw_val = 0xFF; /* Assume a blank if not found */
++ for (data = sevenSegmentData; data->val != -1; data++) {
++ if (val == data->val) {
++ raw_val = data->raw_val;
++ break;
++ }
++ }
++ return(raw_val);
++}
++
++/**********************************************************************
++* Function: raw_val_to_val
++**********************************************************************/
++static u_char raw_val_to_val(u_char raw_val)
++{
++ sevenSegmentData_t *data;
++ u_char val = ' '; /* Assume a blank if not found */
++ for (data = sevenSegmentData; data->val != -1; data++) {
++ if (raw_val == data->raw_val) {
++ val = data->val;
++ break;
++ }
++ }
++ return(val);
++}
++
++/**********************************************************************
++* Function: lh79x_7seg_read_raw_display
++* Function: lh79x_7seg_read_raw_display_lsb
++* Function: lh79x_7seg_read_raw_display_msb
++**********************************************************************/
++uint16_t lh79x_7seg_read_raw_display(void)
++{
++ sevenSegmentContext_t *sevenSegmentContext = &sevenSegmentContext_l;
++ uint16_t raw_val;
++
++ /*
++ * NOTE: The device does not read so we have to remember...
++ */
++ raw_val = sevenSegmentContext->currentRawVal;
++ vdprintk("lh79x_7seg_read_raw_display(0x%04X)\n", raw_val);
++
++ return(raw_val);
++}
++
++u_char lh79x_7seg_read_raw_display_lsb(void)
++{
++ uint16_t raw_val;
++ u_char raw_lsb;
++
++ raw_val = lh79x_7seg_read_raw_display();
++ raw_lsb = (u_char)(raw_val & 0xFF);
++
++ return(raw_lsb);
++}
++
++u_char lh79x_7seg_read_raw_display_msb(void)
++{
++ uint16_t raw_val;
++ u_char raw_msb;
++
++ raw_val = lh79x_7seg_read_raw_display();
++ raw_msb = (u_char)((raw_val >> 8) & 0xFF);
++
++ return(raw_msb);
++}
++
++/**********************************************************************
++* Function: lh79x_7seg_read_display
++* Function: lh79x_7seg_read_display_lsb
++* Function: lh79x_7seg_read_display_msb
++**********************************************************************/
++uint16_t lh79x_7seg_read_display(void)
++{
++ uint16_t raw_val, val;
++ u_char raw_lsb, lsb;
++ u_char raw_msb, msb;
++
++ raw_val = lh79x_7seg_read_raw_display();
++ raw_lsb = (u_char)( raw_val & 0xFF);
++ raw_msb = (u_char)((raw_val >> 8) & 0xFF);
++ lsb = raw_val_to_val(raw_lsb);
++ msb = raw_val_to_val(raw_msb);
++ val = (uint16_t)((msb << 8) | lsb);
++
++ return(val);
++}
++
++u_char lh79x_7seg_read_display_lsb(void)
++{
++ u_char raw_lsb, lsb;
++
++ raw_lsb = lh79x_7seg_read_raw_display_lsb();
++ lsb = raw_val_to_val(raw_lsb);
++
++ return(lsb);
++}
++
++u_char lh79x_7seg_read_display_msb(void)
++{
++ u_char raw_msb, msb;
++
++ raw_msb = lh79x_7seg_read_raw_display_msb();
++ msb = raw_val_to_val(raw_msb);
++
++ return(msb);
++}
++
++/**********************************************************************
++* Function: lh79x_7seg_write_raw_display
++* Function: lh79x_7seg_write_raw_display_lsb
++* Function: lh79x_7seg_write_raw_display_msb
++**********************************************************************/
++void lh79x_7seg_write_raw_display(uint16_t raw_val)
++{
++ sevenSegmentContext_t *sevenSegmentContext = &sevenSegmentContext_l;
++
++ vdprintk("lh79x_7seg_write_raw_display(0x%04X)\n", raw_val);
++ /*
++ * NOTE: The device does not read so we have to remember...
++ */
++ sevenSegmentContext->currentRawVal = raw_val;
++ cpld->seven_seg = raw_val;
++
++ return;
++}
++
++void lh79x_7seg_write_raw_display_lsb(u_char raw_lsb)
++{
++ uint16_t raw_val;
++
++ raw_val = lh79x_7seg_read_raw_display();
++ raw_val &= 0xFF00;
++ raw_val &= ((uint16_t)raw_lsb) & 0x00FF;
++ lh79x_7seg_write_raw_display(raw_val);
++
++ return;
++}
++
++void lh79x_7seg_write_raw_display_msb(u_char raw_msb)
++{
++ uint16_t raw_val;
++
++ raw_val = lh79x_7seg_read_raw_display();
++ raw_val &= 0x00FF;
++ raw_val &= (((uint16_t)raw_msb) << 8) & 0xFF00;
++ lh79x_7seg_write_raw_display(raw_val);
++
++ return;
++}
++
++/**********************************************************************
++* Function: lh79x_7seg_write_display
++* Function: lh79x_7seg_write_display_lsb
++* Function: lh79x_7seg_write_display_msb
++* Function: lh79x_7seg_write_display_str
++**********************************************************************/
++void lh79x_7seg_write_display(uint16_t val)
++{
++ u_char raw_lsb, lsb;
++ u_char raw_msb, msb;
++ uint16_t raw_val;
++
++ lsb = (u_char)( val & 0xFF);
++ msb = (u_char)((val >> 8) & 0xFF);
++ raw_lsb = val_to_raw_val(lsb);
++ raw_msb = val_to_raw_val(msb);
++ raw_val = (uint16_t)((raw_msb << 8) | raw_lsb);
++ lh79x_7seg_write_raw_display(raw_val);
++
++ return;
++}
++
++void lh79x_7seg_write_display_lsb(u_char lsb)
++{
++ u_char raw_lsb;
++
++ raw_lsb = val_to_raw_val(lsb);
++ lh79x_7seg_write_raw_display_lsb(raw_lsb);
++
++ return;
++}
++
++void lh79x_7seg_write_display_msb(u_char msb)
++{
++ u_char raw_msb;
++
++ raw_msb = val_to_raw_val(msb);
++ lh79x_7seg_write_raw_display_msb(raw_msb);
++
++ return;
++}
++
++void lh79x_7seg_write_display_str(u_char *str)
++{
++ uint16_t val;
++ uint16_t c16;
++ u_char c;
++
++ if (str) {
++ /* This is basically a read, shift, write lsb loop */
++ for ( ; *str; str++) {
++ c = *str;
++ if (c == '\n') continue;
++ if (c == '\r') continue;
++ val = lh79x_7seg_read_display();
++ val <<= 8;
++ val &= 0xFF00;
++ c16 = c & 0x00FF;
++ val |= c16;
++ lh79x_7seg_write_display(val);
++ }
++ }
++ return;
++}
++
++/**********************************************************************
++* Function: sevenSegment_read
++* Function: sevenSegment_poll
++* Function: sevenSegment_open
++* Function: sevenSegment_fasync
++* Function: sevenSegment_release
++* ************************************
++* *** User space driver interfaces ***
++* ************************************
++**********************************************************************/
++
++/*
++* NOTE: The read algorithm is wide open for interpretation.
++* I am not sure what the behaviour ought to be here.
++*/
++static ssize_t sevenSegment_read(struct file *filp, char *buffer,
++ size_t _count, loff_t *ppos)
++{
++ sevenSegmentContext_t *sevenSegmentContext = filp->private_data;
++ DECLARE_WAITQUEUE(wait, current);
++ ssize_t sizeRead = 0;
++ char *ptr = buffer;
++ int err = 0;
++ int count = (int)_count;
++ uint16_t c16;
++ u_char c;
++ int dataSize;
++ int dataByteCount;
++
++ switch (sevenSegmentContext->accessMode) {
++ case ACCESSMODE_LSB:
++ case ACCESSMODE_MSB:
++ dataSize = 8;
++ break;
++ case ACCESSMODE_SHIFT:
++ default:
++ dataSize = 16;
++ break;
++ }
++ dataByteCount = dataSize / 8;
++
++ add_wait_queue(&sevenSegmentContext->read_and_write_wait, &wait);
++ while (count >= dataByteCount) {
++ err = -ERESTARTSYS;
++ if (signal_pending(current))
++ break;
++ /* NOTE: We always have data */
++ switch (sevenSegmentContext->accessMode) {
++ case ACCESSMODE_LSB:
++ c = lh79x_7seg_read_display_lsb();
++ break;
++ case ACCESSMODE_MSB:
++ c = lh79x_7seg_read_display_msb();
++ break;
++ case ACCESSMODE_SHIFT:
++ default:
++ c16 = lh79x_7seg_read_display();
++ /* Flip the bytes so they get returned in the correct order */
++ c = (u_char)(c16 >> 8);
++ c16 = ((c16 << 8) & 0xFF00) | ((uint16_t)c);
++ break;
++ }
++ if (dataSize == 8) {
++ err = copy_to_user(ptr, &c, sizeof(c));
++ if (err)
++ break;
++ ptr += sizeof(c);
++ count -= sizeof(c);
++ } else /* (dataSize == 16) */ {
++ err = copy_to_user(ptr, &c16, sizeof(c16));
++ if (err)
++ break;
++ ptr += sizeof(c16);
++ count -= sizeof(c16);
++ }
++ }
++ remove_wait_queue(&sevenSegmentContext->read_and_write_wait, &wait);
++ sizeRead = (ptr == buffer ? err : ptr - buffer);
++ return(sizeRead);
++}
++
++static ssize_t sevenSegment_write(struct file *filp, const char *buffer,
++ size_t _count, loff_t *ppos)
++{
++ sevenSegmentContext_t *sevenSegmentContext = filp->private_data;
++ ssize_t sizeWritten = 0;
++ const char *ptr = buffer;
++ int count;
++ u_char c;
++ uint16_t c16;
++ uint16_t val;
++ int err = 0;
++
++ for (count = (int)_count; count > 0; count--) {
++ /* NOTE: We always have room for the data */
++ get_user(c, ptr++);
++ /* Ignore new_line or carriage_return characters */
++ if (c == '\n') continue;
++ if (c == '\r') continue;
++ vdprintk("JMG: (e:%d, r:%d, a:%d) Attempting to write (%c) == (0x%02X)\n",
++ sevenSegmentContext->inEscape,
++ sevenSegmentContext->rawData,
++ sevenSegmentContext->accessMode,
++ c, c);
++ if (sevenSegmentContext->inEscape) {
++ sevenSegmentContext->inEscape = 0;
++ if ( c != ESCAPE ) {
++ switch (c) {
++ case 'r': /* Raw Data */
++ case 'R': /* Raw Data */
++ sevenSegmentContext->rawData = 1;
++ break;
++ case 'c': /* Coooked Data */
++ case 'C': /* Coooked Data */
++ sevenSegmentContext->rawData = 0;
++ break;
++ case 'l': /* LSB */
++ case 'L': /* LSB */
++ sevenSegmentContext->accessMode = ACCESSMODE_LSB;
++ break;
++ case 'm': /* MSB */
++ case 'M': /* MSB */
++ sevenSegmentContext->accessMode = ACCESSMODE_MSB;
++ break;
++ case 's': /* Shift */
++ case 'S': /* Shift */
++ case 'n': /* Normal */
++ case 'N': /* Normal */
++ default:
++ sevenSegmentContext->accessMode = ACCESSMODE_SHIFT;
++ }
++ continue;
++ }
++ } else if ( c == ESCAPE ) {
++ sevenSegmentContext->inEscape = 1;
++ continue;
++ }
++ if (sevenSegmentContext->rawData) {
++ val = lh79x_7seg_read_raw_display();
++ } else {
++ val = lh79x_7seg_read_display();
++ }
++ switch (sevenSegmentContext->accessMode) {
++ case ACCESSMODE_LSB:
++ val &= 0xFF00;
++ c16 = c & 0x00FF;
++ val |= c16;
++ break;
++ case ACCESSMODE_MSB:
++ val &= 0x00FF;
++ c16 = ((uint16_t)c << 8) & 0xFF00;
++ val |= c16;
++ break;
++ case ACCESSMODE_SHIFT:
++ default:
++ val <<= 8;
++ val &= 0xFF00;
++ c16 = c & 0x00FF;
++ val |= c16;
++ break;
++ }
++ vdprintk("JMG: Writing (0x%04X)\n", val);
++ if (sevenSegmentContext->rawData) {
++ lh79x_7seg_write_raw_display(val);
++ } else {
++ lh79x_7seg_write_display(val);
++ }
++ }
++ filp->f_dentry->d_inode->i_mtime = CURRENT_TIME;
++ sizeWritten = (ptr == buffer ? err : ptr - buffer);
++ return(sizeWritten);
++}
++
++static unsigned int sevenSegment_poll(struct file *filp, poll_table *wait)
++{
++ sevenSegmentContext_t *sevenSegmentContext = filp->private_data;
++ /* We ALWAYS have data waiting ;) */
++ int sts = POLLIN | POLLRDNORM;
++ poll_wait(filp, &sevenSegmentContext->read_and_write_wait, wait);
++ return(sts);
++}
++
++static int sevenSegment_open(struct inode *inode, struct file *filp)
++{
++ sevenSegmentContext_t *sevenSegmentContext = &sevenSegmentContext_l;
++ int sts = 0;
++ filp->private_data = sevenSegmentContext;
++ return(sts);
++}
++
++static int sevenSegment_fasync(int fd, struct file *filp, int on)
++{
++ sevenSegmentContext_t *sevenSegmentContext = filp->private_data;
++ int sts;
++ sts = fasync_helper(fd, filp, on, &sevenSegmentContext->fasync);
++ return(sts);
++}
++
++static int sevenSegment_release(struct inode *inode, struct file *filp)
++{
++ lock_kernel();
++ sevenSegment_fasync(-1, filp, 0);
++ unlock_kernel();
++ return(0);
++}
++
++/**********************************************************************
++* Define (fill in) the user space file operations for this driver
++* and initialize the Seven Segment driver as a "miscdevice":
++* Character device
++* Major(10) --- Non-serial mice, misc features
++* Minor(21) --- /dev/7seg (7-segment display)
++**********************************************************************/
++static struct file_operations sevenSegment_fops = {
++owner: THIS_MODULE,
++read: sevenSegment_read,
++write: sevenSegment_write,
++poll: sevenSegment_poll,
++open: sevenSegment_open,
++fasync: sevenSegment_fasync,
++release: sevenSegment_release,
++};
++
++static struct miscdevice sevenSegment_dev = {
++minor: 21,
++name: "7seg",
++fops: &sevenSegment_fops,
++};
++
++/**********************************************************************
++* Function: lh79x_7seg_init
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++static int lh79x_7seg_init(void)
++{
++ sevenSegmentContext_t *sevenSegmentContext = &sevenSegmentContext_l;
++ int sts = 0;
++ dprintk("ENTER: lh79x_7seg_init()\n");
++ init_waitqueue_head(&sevenSegmentContext->read_and_write_wait);
++ sts = misc_register(&sevenSegment_dev);
++ lh79x_7seg_write_display_str((u_char *)"HI");
++ dprintk("LEAVE: lh79x_7seg_init(%d)\n", sts);
++ return(sts);
++}
++
++/**********************************************************************
++* Function: lh79x_7seg_exit
++*
++* Purpose:
++* Un-Register & Cleanup the module
++**********************************************************************/
++static void lh79x_7seg_exit(void)
++{
++ dprintk("ENTER: lh79x_7seg_exit()\n");
++ misc_deregister(&sevenSegment_dev);
++ lh79x_7seg_write_display_str((u_char *)"BY");
++ dprintk("LEAVE: lh79x_7seg_exit()\n");
++ return;
++}
++
++module_init(lh79x_7seg_init);
++module_exit(lh79x_7seg_exit);
++
++MODULE_AUTHOR("Jim Gleason / Lineo, Inc.");
++MODULE_DESCRIPTION("Seven Segment Display Driver for Sharp LH7x EVB");
++MODULE_LICENSE("Copyright (c) 2002 Lineo, Inc.");
++
+diff -urN linux-2.4.26/drivers/misc/Makefile linux-2.4.26-vrs1-lnode80/drivers/misc/Makefile
+--- linux-2.4.26/drivers/misc/Makefile 2005-11-02 16:54:22.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/Makefile 2005-11-02 17:37:31.000000000 -0400
+@@ -18,6 +18,9 @@
+ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
+ obj-$(CONFIG_MCP_UCB1200_AUDIO) += ucb1x00-audio.o
+ obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
++obj-$(CONFIG_TOUCHSCREEN_LH79520) += ads784x.o marm-lh7x.o
++obj-$(CONFIG_EEPROM_LH79520) += eeprom-lh7x.o
++obj-$(CONFIG_7SEGMENT_LH79520) += lh7x-7seg.o
+
+ include $(TOPDIR)/Rules.make
+
+diff -urN linux-2.4.26/drivers/misc/marm-lh7x.c linux-2.4.26-vrs1-lnode80/drivers/misc/marm-lh7x.c
+--- linux-2.4.26/drivers/misc/marm-lh7x.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/marm-lh7x.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,521 @@
++/* vi: set sw=4 ts=4 ai: */
++
++// #define MODULE
++
++/**********************************************************************
++* linux/drivers/misc/ssp-lh7x.c
++*
++* Provide SSP (synchronous Serial Port) functionality for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/wait.h>
++#include <linux/sched.h>
++#include <linux/smp_lock.h>
++#include <linux/spinlock.h>
++#include <linux/delay.h>
++
++#undef DEBUG
++#undef VERBOSE
++#define DRVNAME "marm_lh7x"
++#include <linux/verbosedebug.h>
++
++#include <linux/version.h>
++#ifdef MODULE
++char kernel_version[] = UTS_RELEASE;
++#endif /* MODULE */
++
++#include <asm/irq.h>
++#include <asm/mach/irq.h>
++#include <asm/arch/irq.h>
++#include <asm/arch/iocon.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/ssp_lh7x.h>
++#include <lh79520.h>
++#include "ssp.h"
++
++// global set by pl110fb driver
++unsigned short marm_backlight;
++
++#undef BACKLIGHT
++#define BACKLIGHT marm_backlight
++
++#define MARM_TS_INT 3
++#define MARM_TS_IOBIT 6
++
++static volatile u16 *gpioa = (volatile u16 *) GPOUT16_BASE;
++static gpioARegs_t *gpioadr = (gpioARegs_t *) GPIO0_BASE;
++static ioconRegs_t *iocon = (ioconRegs_t *)IOCON_PHYS;
++static vicRegs_t *vic = (vicRegs_t *)VIC_BASE;
++static rcpcRegs_t *rcpc = (rcpcRegs_t *) RCPC_PHYS;
++
++/**********************************************************************
++* Function: ssp_busy_wait
++*
++* Purpose:
++* Wait until the state of the SSP busy bit from the status register
++* indicates the SSP is no longer busy.
++*
++* Returns:
++* N/A
++**********************************************************************/
++static void ssp_busy_wait(void)
++{
++ vdprintk("ENTER: ssp_busy_wait()\n");
++};
++
++/**********************************************************************
++* Function: ssp_flush_tx_fifo
++* Function: ssp_flush_rx_fifo
++*
++* Purpose:
++* Flush the transmit (tx) and receive (rx) fifo buffer
++*
++* Returns:
++* N/A
++**********************************************************************/
++static void ssp_flush_tx_fifo(sspContext_t *sspContext)
++{
++ vdprintk("ENTER: ssp_flush_tx_fifo()\n");
++};
++
++static void ssp_flush_rx_fifo(sspContext_t *sspContext)
++{
++ vdprintk("ENTER: ssp_flush_rx_fifo()\n");
++};
++
++/**********************************************************************
++* Function: ssp_chipselect_enable
++* Function: ssp_chipselect_disable
++* Function: ssp_chipselect_manual
++* Function: ssp_chipselect_automatic
++*
++* Purpose:
++* Controls the chipselect pin associated with the SSP
++*
++* Returns:
++* N/A
++*
++**********************************************************************/
++static void ssp_chipselect_enable(void)
++{
++ vdprintk("ENTER: ssp_chipselect_enable()\n");
++};
++
++static void ssp_chipselect_disable(void)
++{
++ vdprintk("ENTER: ssp_chipselect_disable()\n");
++};
++
++static void ssp_chipselect_manual(void)
++{
++ vdprintk("ENTER: ssp_chipselect_manual()\n");
++
++ gpioadr->ddr &= ~(1 << MARM_TS_IOBIT); // make sure PA is input
++ iocon->MiscMux &= ~(MISCMUX_RCEII0); // make it PA6 instead of IRQ0
++
++ // ensure TS IRQ pin is interrupt
++ iocon->LCDMux &= ~(MISCMUX_PWM0SYNC); // assumes irq 3
++};
++
++static void ssp_chipselect_automatic(void)
++{
++ vdprintk("ENTER: ssp_chipselect_automatic()\n");
++ ssp_chipselect_manual();
++};
++
++/**********************************************************************
++* Function: ssp_lh7x_write16
++*
++* Purpose:
++* Write the LH7x SSP data register
++**********************************************************************/
++static void ssp_lh7x_write16(sspContext_t *sspContext,
++ unsigned int data)
++{
++ int i;
++ int ndata = data & 0xFF;
++ int pdata, qdata;
++
++ vdprintk("ENTER: ssp_lh7x_write16() 0x%04X\n", data);
++
++ udelay(10);
++ pdata = BACKLIGHT; // keep on backlight
++ *gpioa = pdata; // assert nCS
++
++ for (i = 8; i > 0; i--)
++ {
++ *gpioa = qdata = pdata | ((ndata & 0x80) ? TS_DIN : 0); // strobe out bit
++ udelay(1);
++ *gpioa = qdata | TS_DCLK | nLED; // raise clock
++ udelay(1);
++ *gpioa = qdata; // lower clock
++ udelay(1);
++
++ ndata <<= 1;
++ }
++ udelay(50); // leave enough time for conversion
++
++ *gpioa = pdata;
++};
++
++/**********************************************************************
++* Function: ssp_lh7x_read16
++*
++* Purpose:
++* Read the LH7x SSP data register
++**********************************************************************/
++static unsigned int ssp_lh7x_read16(sspContext_t *sspContext)
++{
++ int i;
++ int pdata, ndata;
++
++ pdata = BACKLIGHT;
++ ndata = 0;
++
++ for (i = 16; i > 0; i--)
++ {
++ *gpioa = pdata;
++ udelay(1);
++ *gpioa = pdata | TS_DCLK | nLED;
++ udelay(1);
++
++ if (gpioadr->dr & (1 << MARM_TS_IOBIT))
++ ndata |= 1;
++
++ ndata <<= 1;
++ }
++
++ vdprintk("LEAVE: ssp_lh7x_read16() 0x%04X (%04d norm) raw\n", ndata, ndata >> 4);
++ return(ndata >> 4);
++};
++
++/**********************************************************************
++* Macro: ssp_lh7x_ts_pen_down
++**********************************************************************/
++static int ssp_lh7x_ts_pen_down(sspContext_t *sspContext)
++{
++ int pen_down = vic->RawIntr & (1 << MARM_TS_INT); //look for IRQ
++ vdprintk("ssp_lh7x_ts_pen_down(%d)\n", pen_down);
++ return (pen_down);
++}
++
++/**********************************************************************
++* Macro: ssp_lh7x_ts_pen_down_irq_enable
++**********************************************************************/
++static int ssp_lh7x_ts_pen_down_irq_enable(sspContext_t *sspContext)
++{
++ int lastState = vic->IntEnable & (1 << MARM_TS_INT);
++ vdprintk("ssp_lh7x_ts_pen_down_irq_enable: lastState %d\n", lastState);
++#if 0
++ //enable_irq(MARM_TS_INT);
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++#endif
++ sspContext->irq_state = 1;
++ return(lastState);
++}
++
++/**********************************************************************
++* Macro: ssp_lh7x_ts_pen_down_irq_disable
++**********************************************************************/
++static int ssp_lh7x_ts_pen_down_irq_disable(
++ sspContext_t *sspContext)
++{
++ int lastState = vic->IntEnable & (1 << MARM_TS_INT);
++ vdprintk("ssp_lh7x_ts_pen_down_irq_disable: lastState %d\n", lastState);
++ //disable_irq(MARM_TS_INT);
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ barrier();
++ rcpc->intClear = (1 << MARM_TS_INT);
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ sspContext->irq_state = 0;
++ return(lastState);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_ts_pen_down_irq
++*
++* We only detect touch screen _touches_ (pen down) with this interrupt
++* handler, and even then we just schedule our task.
++*
++* Note: It has already been determined that this is our interrupt
++* before we ever get it here so checking is minimal to non-existant.
++**********************************************************************/
++static void ssp_lh7x_ts_pen_down_irq(int irq, sspContext_t *sspContext,
++ struct pt_regs * regs)
++{
++ /*
++ * Disable the touchscreen interrupts
++ * by disabling the touchscreen IRQ
++ * --- AND ---
++ * Enable regular polling of the touchscreen device
++ * (The touchscreen IRQ will be re-enabled and polling
++ * will be disabled when it is detected that the
++ * pen is no longer down.)
++ */
++ /* Disable touch screen IRQ */
++ vdprintk("ENTER: ssp_lh7x_ts_pen_down_irq()\n");
++ ssp_lh7x_ts_pen_down_irq_disable(sspContext);
++ vdprintk("ENTER: wake_up()\n");
++ wake_up(sspContext->irq_wait_ptr);
++ vdprintk("LEAVE: ssp_lh7x_ts_pen_down_irq()\n");
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_irq_handler
++*
++* This interrupt handler only directs traffic for the interrupts
++* by forwarding on the call to the appropriate interrupt handler.
++**********************************************************************/
++static void ssp_lh7x_irq_handler(int irq, void *_sspContext,
++ struct pt_regs * regs)
++{
++ sspContext_t *sspContext = _sspContext;
++
++ vdprintk("ENTER: ssp_lh7x_irq_handler()\n");
++ if ((sspContext) && (sspContext->irq_wait_ptr)) {
++ if (ssp_lh7x_ts_pen_down(sspContext))
++ ssp_lh7x_ts_pen_down_irq(irq, sspContext, regs);
++ else
++#if defined(VERBOSE) && defined(DEBUG)
++ printk("ssp_lh7x_irq_handler() --- Not our interrupt\n");
++#else
++ ;
++#endif
++ } // if(sspContext) ...
++#if defined(VERBOSE) && defined(DEBUG)
++ else {
++ printk("ssp_lh7x_irq_handler( NO ACTION )\n");
++ }
++#endif
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_lock
++* Function: ssp_lh7x_unlock
++*
++* Purpose:
++* Lock/UnLock the SSP for a particular device (ts/ee)
++**********************************************************************/
++static int ssp_lh7x_lock(sspContext_t *sspContext, int device)
++{
++ vdprintk("ENTER: ssp_lh7x_lock()\n");
++ return -1;
++};
++
++static int ssp_lh7x_unlock(sspContext_t *sspContext, int device)
++{
++ vdprintk("ENTER: ssp_lh7x_unlock()\n");
++ return -1;
++};
++
++/**********************************************************************
++* Function: ssp_lh7x_disable
++*
++* Purpose:
++* Disconnect I/O pins from the SSP module
++* and disable the SSP peripheral and its clocks.
++**********************************************************************/
++static void ssp_lh7x_disable(void)
++{
++ vdprintk("ENTER: ssp_lh7x_disable()\n");
++};
++
++/**********************************************************************
++* Function: ssp_lh7x_enable
++*
++* Purpose:
++* Disconnect I/O pins from the SSP module
++* and disable the SSP peripheral and its clocks.
++**********************************************************************/
++static void ssp_lh7x_enable(void)
++{
++ vdprintk("ENTER: ssp_lh7x_enable()\n");
++ return;
++}
++
++/**********************************************************************
++* Fill in our context structures
++**********************************************************************/
++
++static sspContext_t sspContext_l = {
++ ts_txTimeout: 10000,
++ ts_rxTimeout: 10000,
++ ee_txTimeout: 10000,
++ ee_rxTimeout: 10000,
++ haveIrq: 0,
++};
++
++/**********************************************************************
++* Function: ssp_request_pointer
++* Function: ssp_provide_pointer
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++void *ssp_request_pointer(int device, char *request)
++{
++ sspContext_t *sspContext = &sspContext_l;
++ void *vp = NULL;
++
++ vdprintk("ENTER: ssp_request_pointer(\"%d\":\"%s\")\n", device, request);
++ if (device == SSP_DEV_TOUCHSCREEN) {
++ if (strcmp(request, "write") == 0) {
++ vp = ssp_lh7x_write16;
++ } else if (strcmp(request, "read") == 0) {
++ vp = ssp_lh7x_read16;
++ } else if (strcmp(request, "enable_pen_down_irq") == 0) {
++ vp = ssp_lh7x_ts_pen_down_irq_enable;
++ } else if (strcmp(request, "disable_pen_down_irq") == 0) {
++ vp = ssp_lh7x_ts_pen_down_irq_disable;
++ } else if (strcmp(request, "is_pen_down") == 0) {
++ vp = ssp_lh7x_ts_pen_down;
++ } else if (strcmp(request, "lock") == 0) {
++ vp = ssp_lh7x_lock;
++ } else if (strcmp(request, "unlock") == 0) {
++ vp = ssp_lh7x_unlock;
++ } else if (strcmp(request, "sspContext") == 0) {
++ vp = sspContext;
++ } else if (strcmp(request, "flush_tx_fifo") == 0) {
++ vp = ssp_flush_tx_fifo;
++ } else if (strcmp(request, "flush_rx_fifo") == 0) {
++ vp = ssp_flush_rx_fifo;
++ } else if (strcmp(request, "ssp_busy_wait") == 0) {
++ vp = ssp_busy_wait;
++ } else if (strcmp(request, "chipselect_enable") == 0) {
++ vp = ssp_chipselect_enable;
++ } else if (strcmp(request, "chipselect_disable") == 0) {
++ vp = ssp_chipselect_disable;
++ } else if (strcmp(request, "chipselect_manual") == 0) {
++ vp = ssp_chipselect_manual;
++ }
++ } else if (device == SSP_DEV_EEPROM) {
++ vp = NULL;
++ }
++ vdprintk("LEAVE: ssp_request_pointer(0x%08X)\n", (unsigned int)vp);
++
++ return(vp);
++}
++
++void *ssp_provide_pointer(int device, char *request, void *vp)
++{
++ sspContext_t *sspContext = &sspContext_l;
++
++ vdprintk("ENTER: ssp_provide_pointer(\"%d\":\"%s\":0x%08X)\n",
++ device, request, (unsigned int)vp);
++ if (device == SSP_DEV_TOUCHSCREEN) {
++ if (strcmp(request, "irq_wait_ptr") == 0) {
++ sspContext->irq_wait_ptr = vp;
++ } else {
++ vp = NULL;
++ }
++ } else if (device == SSP_DEV_EEPROM) {
++ vp = NULL;
++ } else {
++ vp = NULL;
++ }
++ vdprintk("LEAVE: ssp_provide_pointer(0x%08X)\n", (unsigned int)vp);
++
++ return(vp);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_init
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++static int __init ssp_lh7x_init(void)
++{
++ sspContext_t *sspContext = &sspContext_l;
++ int sts = 0;
++ int result;
++
++ vdprintk("ENTER: ssp_lh7x_init()\n");
++
++ /*
++ * Disconnect I/O pins from the SSP module
++ * and disable the SSP peripheral and its clocks.
++ */
++ ssp_lh7x_disable();
++
++ /* Flush the transmit FIFO */
++ ssp_flush_tx_fifo(sspContext);
++
++ /* Flush the receive FIFO */
++ ssp_flush_rx_fifo(sspContext);
++
++ ssp_chipselect_automatic();
++ /*
++ * Connect I/O pins from the SSP module
++ * and enable the SSP peripheral and its clocks.
++ */
++ ssp_lh7x_enable();
++
++ /*
++ * Request IRQ and attach it to the touchscreen pen_down line and enable it
++ */
++ sspContext->haveIrq = 0;
++ result = request_irq(MARM_TS_INT, ssp_lh7x_irq_handler,
++ SA_SAMPLE_RANDOM, DRVNAME, sspContext);
++ if (result < 0) {
++ printk("%s: cannot get requested IRQ(MARM_TS_INT)\n", DRVNAME);
++ } else {
++ sspContext->haveIrq = 1;
++ vdprintk("%s: got requested IRQ(MARM_TS_INT)\n", DRVNAME);
++ }
++ ssp_lh7x_ts_pen_down_irq_enable(sspContext);
++
++ vdprintk("LEAVE: ssp_lh7x_init()\n");
++ return(sts);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_exit
++*
++* Purpose:
++* Un-Register & Cleanup the module
++**********************************************************************/
++static void ssp_lh7x_exit(void)
++{
++ sspContext_t *sspContext = &sspContext_l;
++
++ vdprintk("ENTER: ssp_lh7x_exit()\n");
++
++ /*
++ * Disable & Return IRQ
++ */
++ lock_kernel();
++ ssp_lh7x_ts_pen_down_irq_disable(sspContext);
++ if (sspContext->haveIrq) {
++ free_irq(MARM_TS_INT, sspContext);
++ sspContext->haveIrq = 0;
++ }
++ unlock_kernel();
++
++ vdprintk("LEAVE: ssp_lh7x_exit()\n");
++ return;
++}
++
++module_init(ssp_lh7x_init);
++module_exit(ssp_lh7x_exit);
++
++MODULE_AUTHOR("Jim Gleason / Lineo, Inc.");
++MODULE_DESCRIPTION("SSP Driver for Sharp LH7x EVB");
++MODULE_LICENSE("Copyright (c) 2002 Lineo, Inc.");
+diff -urN linux-2.4.26/drivers/misc/ssp.h linux-2.4.26-vrs1-lnode80/drivers/misc/ssp.h
+--- linux-2.4.26/drivers/misc/ssp.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/ssp.h 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,29 @@
++/* vi: set sw=4 ts=4 ai: */
++
++/**********************************************************************
++* linux/drivers/misc/ssp.h
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* Provide SSP types & definitions
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++#ifndef _SSP_h
++#define _SSP_h
++
++/*********************************************************************
++* Global Function Declarations
++*********************************************************************/
++extern void *ssp_request_pointer(int device, char *request);
++extern void *ssp_provide_pointer(int device, char *request, void *vp);
++
++#define SSP_DEV_TOUCHSCREEN 1
++#define SSP_DEV_EEPROM 2
++
++#endif /* _SSP_h */
++
+diff -urN linux-2.4.26/drivers/misc/ssp-lh7x.c linux-2.4.26-vrs1-lnode80/drivers/misc/ssp-lh7x.c
+--- linux-2.4.26/drivers/misc/ssp-lh7x.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/misc/ssp-lh7x.c 2005-11-02 17:37:31.000000000 -0400
+@@ -0,0 +1,1024 @@
++/* vi: set sw=4 ts=4 ai: */
++
++// #define MODULE
++
++/**********************************************************************
++* linux/drivers/misc/ssp-lh7x.c
++*
++* Provide SSP (synchronous Serial Port) functionality for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++//#include <linux/wait.h>
++#include <linux/sched.h>
++#include <linux/smp_lock.h>
++#include <linux/spinlock.h>
++//#include <linux/interrupt.h>
++//#include <linux/irq.h>
++
++#undef DEBUG
++#undef VERBOSE
++#undef DRVNAME //"ssp_lh7x"
++#include <linux/verbosedebug.h>
++
++#include <linux/version.h>
++#ifdef MODULE
++char kernel_version[] = UTS_RELEASE;
++#endif /* MODULE */
++
++#include <asm/irq.h>
++#include <asm/mach/irq.h>
++#include <asm/arch/irq.h>
++#include <asm/arch/iocon.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/gpio.h>
++//#include <asm/arch/cpld.h>
++#include <asm/arch/rcpc.h>
++#include <asm/arch/ssp_lh7x.h>
++#include "ssp.h"
++
++unsigned int hclkfreq_get( void);
++
++static gpioARegs_t *gpioa = (gpioARegs_t *)GPIO0_PHYS;
++static ioconRegs_t *iocon = (ioconRegs_t *)IOCON_PHYS;
++static rcpcRegs_t *rcpc = (rcpcRegs_t *)RCPC_PHYS;
++//static cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++static sspRegs_t *ssp = (sspRegs_t *)SSP_BASE;
++static vicRegs_t *vic = (vicRegs_t *)VIC_BASE;
++/*
++* hclk_freq:
++* The frequency of the clock that feeds the SSP clock prescaler in the RCPC
++* The frequency is in Hz
++*/
++static unsigned int hclk_freq = 0;
++
++/**********************************************************************
++* Additional RCPC defines
++**********************************************************************/
++#define rcpc_sspClkControl spareClkCtrl
++#define rcpc_sspClkPrescale spare1Prescale
++
++#define RCPC_LOCK 1
++#define RCPC_LOCKED RCPC_LOCK
++#define RCPC_UNLOCK 0
++#define RCPC_UNLOCKED RCPC_UNLOCK
++
++/**********************************************************************
++* Function: ssp_busy_wait
++*
++* Purpose:
++* Wait until the state of the SSP busy bit from the status register
++* indicates the SSP is no longer busy.
++*
++* Returns:
++* N/A
++**********************************************************************/
++static void ssp_busy_wait(void)
++{
++ while ( ssp->sr & SSP_SR_BSY ) {
++ barrier();
++ }
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_flush_tx_fifo
++* Function: ssp_flush_rx_fifo
++*
++* Purpose:
++* Flush the transmit (tx) and receive (rx) fifo buffer
++*
++* Returns:
++* N/A
++**********************************************************************/
++static void ssp_flush_tx_fifo(sspContext_t *sspContext)
++{
++ int i;
++
++ for (i = sspContext->ts_txTimeout; ((i > 0) && (ssp->sr & SSP_SR_TFE)); i--)
++ {
++ barrier();
++ }
++ return;
++}
++
++static void ssp_flush_rx_fifo(sspContext_t *sspContext)
++{
++ int i;
++ unsigned int junk;
++
++ for (i = sspContext->ts_rxTimeout; ((i > 0) && (ssp->sr & SSP_SR_RNE)); i--)
++ {
++ barrier();
++ junk = ssp->dr;
++ //printk("ssp_flush_rx_fifo(0x%04X)\n", junk);
++ }
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_chipselect_enable
++* Function: ssp_chipselect_disable
++* Function: ssp_chipselect_manual
++* Function: ssp_chipselect_automatic
++*
++* Purpose:
++* Controls the chipselect pin associated with the SSP
++*
++* Returns:
++* N/A
++*
++**********************************************************************/
++static void ssp_chipselect_enable(void)
++{
++ /* Make the SSPFRM signal (ChipSelect) high (enabled) */
++ /* Note: This must have had ssp_chipselect_manual() called first */
++ //printk("ssp_chipselect_enable()\n");
++#ifdef ORDERITE_REV4
++ //FJBgpioa->dr &= ~(SSPFRM_GPIO_BIT); /* LOW == Enabled */
++ gpioa->dr &= ~(SSPEN_GPIO_BIT); /* LOW == Enabled */
++#else
++ gpioa->dr &= ~(SSPFRM_GPIO_BIT); /* LOW == Enabled */
++#endif
++ return;
++}
++
++static void ssp_chipselect_disable(void)
++{
++ /* Make the SSPFRM signal (ChipSelect) low (disabled) */
++ /* Note: This must have had ssp_chipselect_manual() called first */
++ //printk("ssp_chipselect_disable()\n");
++#ifdef ORDERITE_REV4
++ //FJBgpioa->dr |= SSPFRM_GPIO_BIT; /* HIGH == Disabled */
++ gpioa->dr |= SSPEN_GPIO_BIT; /* HIGH == Disabled */
++#else
++ gpioa->dr |= SSPFRM_GPIO_BIT; /* HIGH == Disabled */
++#endif
++ return;
++}
++
++static void ssp_chipselect_manual(void)
++{
++ /* First, disable the ChipSelect */
++ //JMG ssp_chipselect_disable();
++ /* Set up muxing so that we manually control the ChipSelect pin */
++ /* via GPIO port A bit 2 */
++#ifdef ORDERITE_REV4
++ //FJBgpioa->ddr |= SSPFRM_GPIO_BIT; /* Make GPIO an output */
++ gpioa->ddr |= SSPEN_GPIO_BIT; /* Make GPIO an output */
++ //FJBiocon->SSIMux &= ~SSIMUX_SSPFRM;
++ iocon->SSIMux &= ~SSIMUX_SSPENB;
++#else
++ gpioa->ddr |= SSPFRM_GPIO_BIT; /* Make GPIO an output */
++ iocon->SSIMux &= ~SSIMUX_SSPFRM;
++#endif
++ ssp_chipselect_disable();
++ return;
++}
++
++static void ssp_chipselect_automatic(void)
++{
++ /* First, disable the ChipSelect */
++ ssp_chipselect_disable();
++#ifdef ORDERITE_REV4
++ /* Set up muxing so the SSP automatically controls the ChipSelect pin */
++ //FJBiocon->SSIMux |= SSIMUX_SSPFRM;
++ iocon->SSIMux |= SSIMUX_SSPENB;
++#else
++ iocon->SSIMux |= SSIMUX_SSPFRM;
++#endif
++ return;
++}
++
++/**********************************************************************
++* Function: rcpc_lh7x_locked
++*
++* Purpose:
++* Determine write access to the RCPC
++*
++* Returns:
++* The lock state of the RCPC
++*
++**********************************************************************/
++static int rcpc_lh7x_locked(void)
++{
++ int lockState;
++
++ vdprintk("ENTER: rcpc_lh7x_locked()\n");
++ if (rcpc->control & RCPC_CTRL_WRTLOCK_ENABLED) {
++ lockState = RCPC_LOCKED;
++ } else {
++ lockState = RCPC_UNLOCKED;
++ }
++ vdprintk("LEAVE: rcpc_lh7x_locked(%s)\n",
++ (lockState==RCPC_LOCKED)?"Locked":"UnLocked");
++
++ return(lockState);
++}
++
++/**********************************************************************
++* Function: rcpc_lh7x_lock
++*
++* Purpose:
++* Control write access to the RCPC
++*
++* Parameters:
++* action: RCPC_UNLOCK == can write to RCPC
++* RCPC_LOCK == cannot write to RCPC
++*
++* Returns:
++* The previous lock state of the RCPC
++*
++**********************************************************************/
++static int rcpc_lh7x_lock(int action)
++{
++ int priorState;
++
++ vdprintk("ENTER: rcpc_lh7x_lock(%s)\n",
++ (action==RCPC_LOCK)?"Lock":"UnLock");
++ priorState = rcpc_lh7x_locked();
++ if (action == RCPC_UNLOCK) {
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED;
++ } else /* (action == RCPC_LOCK) */ {
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED;
++ }
++ vdprintk("LEAVE: rcpc_lh7x_lock(%s)\n",
++ (action==RCPC_LOCK)?"Lock":"UnLock");
++
++ return(priorState);
++}
++
++#if OLDWAY
++/**********************************************************************
++* Function: ssp_lh7x_get_hclk_freq
++*
++* Purpose:
++* Get the HCLK (bus clock) frequency in Hz
++**********************************************************************/
++static unsigned int ssp_lh7x_get_hclk_freq(void)
++{
++#define XTAL_IN 14745600 /* 14.7456 MHz crystal */
++#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */
++ int divider;
++ unsigned int _hclk_freq;
++
++ vdprintk("ENTER: ssp_lh7x_get_hclk_freq()\n");
++ divider = rcpc->HCLKPrescale * 2; /* HCLK prescale value */
++ if( divider == 0) /* No prescalar == divide by 1 */
++ divider = 1;
++ _hclk_freq = PLL_CLOCK / divider;
++ vdprintk("LEAVE: ssp_lh7x_get_hclk_freq(%u)\n", _hclk_freq);
++
++ return(_hclk_freq);
++}
++#endif
++
++
++/**********************************************************************
++* Function: ssp_lh7x_get_speed
++*
++* Purpose:
++* Get the SSP speed in bits per second
++**********************************************************************/
++static int ssp_lh7x_get_speed(void)
++{
++ int bps;
++ int rcpc_prescale;
++ int ssp_prescale;
++ int ssp_divider;
++
++ vdprintk("ENTER: ssp_lh7x_get_speed()\n");
++ rcpc_prescale = rcpc->rcpc_sspClkPrescale;
++ if (rcpc_prescale == 0) rcpc_prescale = 1;
++ else rcpc_prescale <<= 1;
++ ssp_prescale = ssp->cpsr;
++ ssp_divider = (ssp->cr0 & _SBF(8,_BITMASK(8) ) ) >> 8;
++ bps = hclk_freq / (rcpc_prescale * (ssp_prescale) * (ssp_divider + 1) );
++ vdprintk("LEAVE: ssp_lh7x_get_speed(%d bps)\n", bps);
++
++ return(bps);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_set_speed
++*
++* Purpose:
++* Set the SSP speed in bits per second
++*
++* Processing:
++* If the requested_bits_per_second is negaitve, return 0
++* If the requested_bits_per_second is too fast, set the bit rate
++* as fast as possible.
++* If the requested_bits_per_second is too slow, set the bit rate as
++* slow as possible.
++* If the requested_bits_per_second is in range, set the RCPC
++* SSP clock prescaler register, SSP prescaler, and SSP divider
++* to obtain the clock as close as possible.
++*
++* Parameters:
++* bps: The desired bits per second
++*
++* Returns:
++* The actual bps obtained or 0 if the requested bps is not obtainable.
++*
++* Notes:
++* The mode (SPI/uWire/TI) must be set first for this function to work!
++*
++**********************************************************************/
++static int ssp_lh7x_set_speed(int bps)
++{
++ int rcpcLockState;
++ int32_t ssp_prescale;
++ int32_t ssp_divider;
++ int32_t rcpc_prescale;
++ int32_t new_prescale;
++ int32_t new_divider;
++ int32_t quotient;
++ int32_t delta1;
++ int32_t delta2;
++ int32_t min_error;
++ int32_t new_error;
++# define MAX_SSP_FREQ (hclk_freq / SSP_PRESCALE_MIN)
++
++ vdprintk("ENTER: ssp_lh7x_set_speed(%d bps)\n", bps);
++
++ /* Ensure we are dealing with a legal BPS */
++ if (bps <= 0) {
++ printk("%s: requested ssp speed (%d bps) is to slow\n", DRVNAME, bps);
++ printk("%s: making ssp speed as slow as possible\n", DRVNAME);
++ /* The request bps is slower than the minimum possible */
++ /* ... make it as slow as possible */
++ /* Don't bother calculating the divider values as we know them */
++ rcpc_prescale = RCPC_SSP_PRESCALE_MAX;
++ ssp_prescale = SSP_PRESCALE_MAX;
++ ssp_divider = SSP_DIVIDER_MAX;
++ } else if (bps >= MAX_SSP_FREQ) {
++ printk("%s: requested ssp speed (%d bps) is to fast\n", DRVNAME, bps);
++ printk("%s: making ssp speed as fast as possible\n", DRVNAME);
++ /* Don't bother calculating the divider values as we know them */
++ bps = MAX_SSP_FREQ;
++ ssp_prescale = SSP_PRESCALE_MIN;
++ ssp_divider = 1;
++ rcpc_prescale = 1;
++ } else {
++ /* Calculate the divider values as close as we can */
++ quotient = hclk_freq / bps;
++ if (quotient <= 0)
++ quotient = 1;
++ /* round the quotient */
++ delta1 = bps - (hclk_freq / quotient );
++ if (delta1 < 0)
++ delta1 = -delta1;
++ delta2 = bps - (hclk_freq / (quotient + 1));
++ if (delta2 < 0)
++ delta2 = -delta2;
++ if (delta1 > delta2)
++ quotient++;
++ if (quotient >=
++ (SSP_PRESCALE_MAX * RCPC_SSP_PRESCALE_MAX * SSP_DIVIDER_MAX))
++ {
++ printk("%s: requested ssp speed (%d bps) is to slow\n",
++ DRVNAME, bps);
++ printk("%s: making ssp speed as slow as possible\n", DRVNAME);
++ /* The request bps is slower than the minimum possible */
++ /* ... make it as slow as possible */
++ /* Don't bother calculating the divider values as we know them */
++ rcpc_prescale = RCPC_SSP_PRESCALE_MAX;
++ ssp_prescale = SSP_PRESCALE_MAX;
++ ssp_divider = SSP_DIVIDER_MAX;
++ } else {
++ /*
++ * The computed quotient is in range.
++ * Quotient is the target clock divide frequency.
++ * Get as close as possible.
++ */
++ rcpc_prescale = 1;
++ /*
++ * Try to reduce power by using RCPC prescaler.
++ * Note that the ssp prescaler minimum is two
++ * so can only prescale and maintain accuracy
++ * if quotient is divisible by 4.
++ */
++ while ( ((quotient & 0x3) == 0)
++ && (rcpc_prescale < RCPC_SSP_PRESCALE_MAX) )
++ {
++ quotient >>= 1;
++ rcpc_prescale <<= 1;
++ }
++ /*
++ * Make sure the requested frequency is within range
++ * of the SPP's prescaler and divider.
++ * Hopefully, this loop never executes.
++ * If it does, accuracy suffers.
++ */
++ while (quotient > (SSP_PRESCALE_MAX * SSP_DIVIDER_MAX) ) {
++ rcpc_prescale <<= 1;
++ quotient >>= 1;
++ }
++ /*
++ * Factor the quotient into the divider and prescaler combo
++ * that minimizes the error in the quotient by exhaustively
++ * searching all legal ssp prescaler values.
++ */
++ ssp_prescale = SSP_PRESCALE_MIN;
++ ssp_divider = (quotient / ssp_prescale);
++ ssp_divider = (ssp_divider > SSP_DIVIDER_MAX)
++ ? SSP_DIVIDER_MAX : ssp_divider;
++ min_error = quotient - (ssp_divider * ssp_prescale);
++ min_error = (min_error < 0) ? -min_error : min_error;
++ for (new_prescale = SSP_PRESCALE_MIN + 2;
++ new_prescale < SSP_PRESCALE_MAX;
++ new_prescale += 2)
++ {
++ new_divider = (quotient / new_prescale);
++ new_divider = (new_divider > SSP_DIVIDER_MAX)
++ ? SSP_DIVIDER_MAX : new_divider;
++ new_error = quotient - (new_divider * new_prescale);
++ new_error = (new_error < 0) ? -new_error : new_error;
++ if (new_error < min_error) {
++ min_error = new_error;
++ ssp_prescale = new_prescale;
++ ssp_divider = new_divider;
++ }
++ }
++ }
++ }
++ /* Set up the necessary registers to get the desired BSP */
++ rcpcLockState = rcpc_lh7x_lock(RCPC_UNLOCK);
++ rcpc->rcpc_sspClkPrescale = rcpc_prescale >> 1;
++ (void) rcpc_lh7x_lock(rcpcLockState);
++ ssp->cpsr = ssp_prescale;
++ ssp->cr0 &= 0xff; /* clear old divider value */
++ ssp->cr0 |= SSP_CR0_SCR(ssp_divider - 1);
++
++ vdprintk("LEAVE: ssp_lh7x_set_speed(%d bps)\n", bps);
++
++ return(ssp_lh7x_get_speed());
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_write16
++*
++* Purpose:
++* Write the LH7x SSP data register
++**********************************************************************/
++static void ssp_lh7x_write16(sspContext_t *sspContext,
++ unsigned int data)
++{
++ int i;
++
++ //if (sspContext->ssp_dev_sel == SSP_EEPROM) { //JMG
++ //printk("ENTER: ssp_lh7x_write16(0x%04X)\n", (uint16_t)data);
++ //}
++ for (i=sspContext->ts_txTimeout; ((i>0) && ((ssp->sr&SSP_SR_TNF) == 0)); i--) {
++ barrier();
++ }
++ if (ssp->sr & SSP_SR_TNF) {
++ ssp->dr = (uint16_t)data;
++ } else {
++ printk("%s: write timout\n", DRVNAME);
++ }
++ //vdprintk("LEAVE: ssp_lh7x_write16(0x%04X)\n", (uint16_t)data);
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_read16
++*
++* Purpose:
++* Read the LH7x SSP data register
++**********************************************************************/
++static unsigned int ssp_lh7x_read16(sspContext_t *sspContext)
++{
++ int i;
++ unsigned int data = -1;
++
++ //vdprintk("ENTER: ssp_lh7x_read16()\n");
++ for (i=sspContext->ts_txTimeout; ((i>0) && ((ssp->sr&SSP_SR_RNE) == 0)); i--) {
++ barrier();
++ }
++ if (ssp->sr & SSP_SR_RNE) {
++ if (sspContext->ssp_dev_sel == SSP_EEPROM) {
++ data = (unsigned int)ssp->dr; /* EEPROM */
++ //printk("LEAVE: ssp_lh7x_read16(ee: 0x%04X)\n", data);
++ } else {
++ data = (((unsigned int)ssp->dr) >> 4) & 0x0FFF; /* TOUCHSCREEN */
++ //printk("LEAVE: ssp_lh7x_read16(ts: 0x%04X)\n", data);
++ }
++ } else {
++ //printk("%s: read timout\n", DRVNAME);
++ }
++
++ return(data);
++}
++
++/**********************************************************************
++* Macro: ssp_lh7x_ts_pen_down
++**********************************************************************/
++static int ssp_lh7x_ts_pen_down(sspContext_t *sspContext)
++{
++
++ //int pen_down = vic->IRQStatus & 0x01; //look for IRQ0
++ int pen_down = vic->RawIntr & 0x01; //look for IRQ0
++ dprintk("ssp_lh7x_ts_pen_down(%d)\n", pen_down);
++ return (pen_down);
++}
++
++/**********************************************************************
++* Macro: ssp_lh7x_ts_pen_down_irq_enable
++**********************************************************************/
++static int ssp_lh7x_ts_pen_down_irq_enable(sspContext_t *sspContext)
++{
++ int lastState = vic->IntEnable & 1;
++ dprintk("ssp_lh7x_ts_pen_down_irq_enable\n");
++ //vic->IntEnable = 1;
++ enable_irq(0);
++ sspContext->irq_state = 1;
++ return(lastState);
++}
++
++/**********************************************************************
++* Macro: ssp_lh7x_ts_pen_down_irq_disable
++**********************************************************************/
++static int ssp_lh7x_ts_pen_down_irq_disable(
++ sspContext_t *sspContext)
++{
++ int lastState = vic->IntEnable & 1;
++ dprintk("ssp_lh7x_ts_pen_down_irq_disable\n");
++ //vic->IntEnClear = 1;
++ disable_irq(0);
++ sspContext->irq_state = 0;
++ return(lastState);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_ts_pen_down_irq
++*
++* We only detect touch screen _touches_ (pen down) with this interrupt
++* handler, and even then we just schedule our task.
++*
++* Note: It has already been determined that this is our interrupt
++* before we ever get it here so checking is minimal to non-existant.
++**********************************************************************/
++static void ssp_lh7x_ts_pen_down_irq(int irq, sspContext_t *sspContext,
++ struct pt_regs * regs)
++{
++ /*
++ * Disable the touchscreen interrupts
++ * by disabling the touchscreen IRQ
++ * --- AND ---
++ * Enable regular polling of the touchscreen device
++ * (The touchscreen IRQ will be re-enabled and polling
++ * will be disabled when it is detected that the
++ * pen is no longer down.)
++ */
++ /* Disable touch screen IRQ */
++ dprintk("ENTER: ssp_lh7x_ts_pen_down_irq()\n");
++ ssp_lh7x_ts_pen_down_irq_disable(sspContext);
++ dprintk("ENTER: wake_up()\n");
++ wake_up(sspContext->irq_wait_ptr);
++ vdprintk("LEAVE: ssp_lh7x_ts_pen_down_irq()\n");
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_irq_handler
++*
++* This interrupt handler only directs traffic for the interrupts
++* by forwarding on the call to the appropriate interrupt handler.
++**********************************************************************/
++static void ssp_lh7x_irq_handler(int irq, void *_sspContext,
++ struct pt_regs * regs)
++{
++ sspContext_t *sspContext = _sspContext;
++ if ((sspContext) && (sspContext->irq_wait_ptr)) {
++ //if (ssp_lh7x_ts_pen_down(sspContext)) {
++ if (1) {
++ ssp_lh7x_ts_pen_down_irq(irq, sspContext, regs);
++ }
++#if defined(VERBOSE) && defined(DEBUG)
++ else {
++ vdprintk("ssp_lh7x_irq_handler() --- Not our interrupt\n");
++ }
++#endif
++ }
++#if defined(VERBOSE) && defined(DEBUG)
++ else {
++ vdprintk("ssp_lh7x_irq_handler( NO ACTION )\n");
++ }
++#endif
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_lock
++* Function: ssp_lh7x_unlock
++*
++* Purpose:
++* Lock/UnLock the SSP for a particular device (ts/ee)
++**********************************************************************/
++static int ssp_lh7x_lock(sspContext_t *sspContext, int device)
++{
++ int sts = -1;
++ int cr0;
++
++ spin_lock_irq(&sspContext->sspLock);
++ if (device == SSP_DEV_TOUCHSCREEN) {
++ /* Select the touchscreen */
++ sspContext->ssp_dev_sel = SSP_TOUCHSCREEN;
++ cr0 = ssp->cr0;
++ cr0 &= ~0x00F0;
++ /* National Microwire frame format --- SPI Polarity High */
++ /* Don't mess with data size or clock rate */
++ cr0 |= (SSP_CR0_FRF_NS | SSP_CR0_SPH);
++ ssp->cr0 = cr0;
++ vdprintk("ssp_lh7x_lock(SSP_DEV_TOUCHSCREEN)\n");
++ // sts = 0;
++ } else if (device == SSP_DEV_EEPROM) {
++ /* Select the eeprom */
++ sspContext->ssp_dev_sel = SSP_EEPROM;
++ cr0 = ssp->cr0;
++ cr0 &= ~0x00F0;
++ /* Motorola SPI frame --- w/SPH & w/SPO */
++ /* Don't mess with data size or clock rate */
++ cr0 |= (SSP_CR0_FRF_MOT | SSP_CR0_SPH | SSP_CR0_SPO);
++ ssp->cr0 = cr0;
++ vdprintk("ssp_lh7x_lock(SSP_DEV_EEPROM)\n");
++ // sts = 0;
++ }
++ //cpld->ssp_dev_sel = sspContext->ssp_dev_sel;
++
++ return(sts);
++}
++
++static int ssp_lh7x_unlock(sspContext_t *sspContext, int device)
++{
++ int sts = -1;
++// #define SSP_DEFAULT_DEVICE SSP_TOUCHSCREEN
++#define SSP_DEFAULT_DEVICE SSP_INVALID_DEVICE
++
++ spin_unlock_irq(&sspContext->sspLock);
++ if (device == SSP_DEV_TOUCHSCREEN) {
++ /* Select the default device */
++ sspContext->ssp_dev_sel = SSP_DEFAULT_DEVICE;
++ vdprintk("ssp_lh7x_unlock(SSP_DEV_TOUCHSCREEN)\n");
++ // sts = 0;
++ } else if (device == SSP_DEV_EEPROM) {
++ /* Select the default device */
++ sspContext->ssp_dev_sel = SSP_DEFAULT_DEVICE;
++ vdprintk("ssp_lh7x_unlock(SSP_DEV_EEPROM)\n");
++ // sts = 0;
++ }
++ //cpld->ssp_dev_sel = sspContext->ssp_dev_sel;
++
++ return(sts);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_disable
++*
++* Purpose:
++* Disconnect I/O pins from the SSP module
++* and disable the SSP peripheral and its clocks.
++**********************************************************************/
++static void ssp_lh7x_disable(void)
++{
++ int rcpcLockState;
++
++ vdprintk("ENTER: ssp_lh7x_disable()\n");
++
++ /* Switch all muxed I/O away from the SSP */
++ iocon->SSIMux &= ~(
++ SSIMUX_SSPIN |
++ SSIMUX_SSPOUT |
++ SSIMUX_SSPCLK |
++ SSIMUX_SSPENB |
++ SSIMUX_SSPFRM
++ );
++
++ /* Disable ssp clock */
++ rcpcLockState = rcpc_lh7x_lock(RCPC_UNLOCK);
++ rcpc->rcpc_sspClkControl |= RCPC_SCLKSEL_SSPCLK;
++ (void) rcpc_lh7x_lock(rcpcLockState);
++
++ /* Set control register to their reset defaults */
++ ssp->cr0 = 0;
++ ssp->cr1 = 0;
++
++ /* clear any receive overruns */
++ ssp->u.icr = SSP_IIR_RORIS;
++
++ //JMG /* disable the ssp DMA streams */
++ //JMG dmac->stream0.max = 0;
++ //JMG dmac->stream0.ctrl = 0;
++ //JMG dmac->stream1.max = 0;
++ //JMG dmac->stream1.ctrl = 0;
++ //JMG /* clear any previous SSP DMA completions */
++ //JMG dmac->clear = DMAC_EOT0 | DMAC_EOT1;
++
++ vdprintk("LEAVE: ssp_lh7x_disable()\n");
++
++ return;
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_enable
++*
++* Purpose:
++* Disconnect I/O pins from the SSP module
++* and disable the SSP peripheral and its clocks.
++**********************************************************************/
++static void ssp_lh7x_enable(void)
++{
++
++ vdprintk("ENTER: ssp_lh7x_enable()\n");
++
++ /* Enable the SSP */
++ ssp->cr1 |= SSP_CR1_SSE; /* Synchronous serial port enable */
++
++ /* Switch all muxed I/O to the SSP */
++ /* Note that SSPENB is not required for spi */
++ iocon->SSIMux = (
++ SSIMUX_SSPIN |
++ SSIMUX_SSPOUT |
++ SSIMUX_SSPCLK |
++ //SSIMUX_SSPENB |
++ SSIMUX_SSPFRM
++ );
++
++
++ vdprintk("LEAVE: ssp_lh7x_enable()\n");
++
++ return;
++}
++
++/**********************************************************************
++* Fill in our context structures
++**********************************************************************/
++
++static sspContext_t sspContext_l = {
++ ts_txTimeout: 10000,
++ ts_rxTimeout: 10000,
++ ee_txTimeout: 10000,
++ ee_rxTimeout: 10000,
++ haveIrq: 0,
++};
++
++/**********************************************************************
++* Function: ssp_request_pointer
++* Function: ssp_provide_pointer
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++void *ssp_request_pointer(int device, char *request)
++{
++ sspContext_t *sspContext = &sspContext_l;
++ void *vp = NULL;
++
++ dprintk("ENTER: ssp_request_pointer(\"%d\":\"%s\")\n", device, request);
++ if (device == SSP_DEV_TOUCHSCREEN) {
++ if (strcmp(request, "write") == 0) {
++ vp = ssp_lh7x_write16;
++ } else if (strcmp(request, "read") == 0) {
++ vp = ssp_lh7x_read16;
++ } else if (strcmp(request, "enable_pen_down_irq") == 0) {
++ vp = ssp_lh7x_ts_pen_down_irq_enable;
++ } else if (strcmp(request, "disable_pen_down_irq") == 0) {
++ vp = ssp_lh7x_ts_pen_down_irq_disable;
++ } else if (strcmp(request, "is_pen_down") == 0) {
++ vp = ssp_lh7x_ts_pen_down;
++ } else if (strcmp(request, "lock") == 0) {
++ vp = ssp_lh7x_lock;
++ } else if (strcmp(request, "unlock") == 0) {
++ vp = ssp_lh7x_unlock;
++ } else if (strcmp(request, "sspContext") == 0) {
++ vp = sspContext;
++ } else if (strcmp(request, "flush_tx_fifo") == 0) {
++ vp = ssp_flush_tx_fifo;
++ } else if (strcmp(request, "flush_rx_fifo") == 0) {
++ vp = ssp_flush_rx_fifo;
++ } else if (strcmp(request, "ssp_busy_wait") == 0) {
++ vp = ssp_busy_wait;
++ } else if (strcmp(request, "chipselect_enable") == 0) {
++ vp = ssp_chipselect_enable;
++ } else if (strcmp(request, "chipselect_disable") == 0) {
++ vp = ssp_chipselect_disable;
++ } else if (strcmp(request, "chipselect_manual") == 0) {
++ vp = ssp_chipselect_manual;
++ }
++ } else if (device == SSP_DEV_EEPROM) {
++ if (strcmp(request, "write") == 0) {
++ vp = ssp_lh7x_write16;
++ } else if (strcmp(request, "read") == 0) {
++ vp = ssp_lh7x_read16;
++ } else if (strcmp(request, "lock") == 0) {
++ vp = ssp_lh7x_lock;
++ } else if (strcmp(request, "unlock") == 0) {
++ vp = ssp_lh7x_unlock;
++ } else if (strcmp(request, "sspContext") == 0) {
++ vp = sspContext;
++ } else if (strcmp(request, "chipselect_enable") == 0) {
++ vp = ssp_chipselect_enable;
++ } else if (strcmp(request, "chipselect_disable") == 0) {
++ vp = ssp_chipselect_disable;
++ } else if (strcmp(request, "chipselect_manual") == 0) {
++ vp = ssp_chipselect_manual;
++ } else if (strcmp(request, "chipselect_automatic") == 0) {
++ vp = ssp_chipselect_automatic;
++ } else if (strcmp(request, "flush_tx_fifo") == 0) {
++ vp = ssp_flush_tx_fifo;
++ } else if (strcmp(request, "flush_rx_fifo") == 0) {
++ vp = ssp_flush_rx_fifo;
++ } else if (strcmp(request, "ssp_busy_wait") == 0) {
++ vp = ssp_busy_wait;
++ }
++ }
++ dprintk("LEAVE: ssp_request_pointer(0x%08X)\n", (unsigned int)vp);
++
++ return(vp);
++}
++
++void *ssp_provide_pointer(int device, char *request, void *vp)
++{
++ sspContext_t *sspContext = &sspContext_l;
++
++ dprintk("ENTER: ssp_provide_pointer(\"%d\":\"%s\":0x%08X)\n",
++ device, request, (unsigned int)vp);
++ if (device == SSP_DEV_TOUCHSCREEN) {
++ if (strcmp(request, "irq_wait_ptr") == 0) {
++ sspContext->irq_wait_ptr = vp;
++ } else {
++ vp = NULL;
++ }
++ } else if (device == SSP_DEV_EEPROM) {
++ vp = NULL;
++ } else {
++ vp = NULL;
++ }
++ dprintk("LEAVE: ssp_provide_pointer(0x%08X)\n", (unsigned int)vp);
++
++ return(vp);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_init
++*
++* Purpose:
++* Register & Initialize the module
++**********************************************************************/
++static int __init ssp_lh7x_init(void)
++{
++ sspContext_t *sspContext = &sspContext_l;
++ int sts = 0;
++ int rcpcLockState;
++ int result;
++
++ vdprintk("ENTER: ssp_lh7x_init()\n");
++
++ vdprintk("ssp = 0x%08X\n", (unsigned int)ssp);
++
++ /* Determine the HCLK (bus clock) frequency in Hz */
++#ifdef OLDWAY
++ hclk_freq = ssp_lh7x_get_hclk_freq();
++#else
++ hclk_freq = hclkfreq_get();
++#endif
++
++ /*
++ * Disconnect I/O pins from the SSP module
++ * and disable the SSP peripheral and its clocks.
++ */
++ ssp_lh7x_disable();
++
++ /* Initialize the RCPC SSP clock & prescaler */
++ rcpcLockState = rcpc_lh7x_lock(RCPC_UNLOCK);
++ rcpc->rcpc_sspClkPrescale = 0; /* As fast as possible */
++ rcpc->rcpc_sspClkControl &= ~RCPC_SCLKSEL_SSPCLK; /* Enable SSP clock */
++ (void) rcpc_lh7x_lock(rcpcLockState);
++
++ ssp->cpsr = SSP_CPSR_CPDVSR(SSP_PRESCALE_MIN);
++
++ /* Initialize CR0 */
++ ssp->cr0 = (
++ SSP_CR0_DSS(16) /* 16-bit data */
++ | SSP_CR0_FRF_NS /* National Microwire frame format */
++ | SSP_CR0_SPH /* SPI Polarity */
++ | SSP_CR0_SCR(1) /* Serial clock rate (~922kbps) */
++ );
++
++ /* Initialize CR1 */
++ ssp->cr1 = (
++ SSP_CR1_SSE /* Synchronous serial port enable */
++ );
++
++ /* Set the SSP speed in bits per second */
++ /* Note this MUST be done after the SSP_CR0_FRF_xxx mode is set */
++ (void) ssp_lh7x_set_speed(LH7x_TS_BPS);
++
++ /* Select the touchscreen */
++ sspContext->ssp_dev_sel = SSP_TOUCHSCREEN;
++ //cpld->ssp_dev_sel = sspContext->ssp_dev_sel;
++
++ /* Flush the transmit FIFO */
++ ssp_flush_tx_fifo(sspContext);
++
++ /* Flush the receive FIFO */
++ ssp_flush_rx_fifo(sspContext);
++
++ /* clear any receive overruns */
++ ssp->u.icr = SSP_IIR_RORIS;
++
++ //printk("ssp->cr0 = 0x%04X\n", ssp->cr0);
++ //printk("ssp->cr1 = 0x%04X\n", ssp->cr1);
++ //printk("ssp->sr = 0x%04X\n", ssp->sr);
++ //printk("ssp->cpsr = 0x%04X\n", ssp->cpsr);
++ //printk("ssp->u.icr | u.iir = 0x%04X\n", ssp->u.icr);
++
++ ssp_chipselect_automatic();
++ /*
++ * Connect I/O pins from the SSP module
++ * and enable the SSP peripheral and its clocks.
++ */
++ ssp_lh7x_enable();
++
++ /*
++ * Request IRQ2 and attach it to the touchscreen pen_down line and enable it
++ */
++ sspContext->haveIrq = 0;
++ result = request_irq(0, ssp_lh7x_irq_handler,
++ SA_SAMPLE_RANDOM, DRVNAME, sspContext);
++ if (result < 0) {
++ printk("%s: cannot get requested IRQ(0)\n", DRVNAME);
++ } else {
++ sspContext->haveIrq = 1;
++ dprintk("%s: got requested IRQ(0)\n", DRVNAME);
++ }
++ ssp_lh7x_ts_pen_down_irq_enable(sspContext);
++
++ vdprintk("LEAVE: ssp_lh7x_init()\n");
++ return(sts);
++}
++
++/**********************************************************************
++* Function: ssp_lh7x_exit
++*
++* Purpose:
++* Un-Register & Cleanup the module
++**********************************************************************/
++static void ssp_lh7x_exit(void)
++{
++ sspContext_t *sspContext = &sspContext_l;
++ int rcpcLockState;
++
++ vdprintk("ENTER: ssp_lh7x_exit()\n");
++
++ //printk("ssp->cr0 = 0x%04X\n", ssp->cr0);
++ //printk("ssp->cr1 = 0x%04X\n", ssp->cr1);
++ //printk("ssp->sr = 0x%04X\n", ssp->sr);
++ //printk("ssp->cpsr = 0x%04X\n", ssp->cpsr);
++ //printk("ssp->u.icr | u.iir = 0x%04X\n", ssp->u.icr);
++
++ /*
++ * Disable & Return IRQ 2
++ */
++ lock_kernel();
++ ssp_lh7x_ts_pen_down_irq_disable(sspContext);
++ if (sspContext->haveIrq) {
++ free_irq(0, sspContext);
++ sspContext->haveIrq = 0;
++ }
++ unlock_kernel();
++
++ ssp->cr0 = 0;
++ ssp->cr1 = 0;
++ ssp->u.icr = SSP_IIR_RORIS; /* clear any receive overruns */
++ ssp->cpsr = SSP_CPSR_CPDVSR(SSP_PRESCALE_MIN);
++
++ /* Turn off the RCPC SSP clock */
++ rcpcLockState = rcpc_lh7x_lock(RCPC_UNLOCK);
++ rcpc->rcpc_sspClkControl |= RCPC_SCLKSEL_SSPCLK; /* Disable SSP clock */
++ (void) rcpc_lh7x_lock(rcpcLockState);
++
++ vdprintk("LEAVE: ssp_lh7x_exit()\n");
++ return;
++}
++
++module_init(ssp_lh7x_init);
++module_exit(ssp_lh7x_exit);
++
++MODULE_AUTHOR("Jim Gleason / Lineo, Inc.");
++MODULE_DESCRIPTION("SSP Driver for Sharp LH7x EVB");
++MODULE_LICENSE("Copyright (c) 2002 Lineo, Inc.");
++
+diff -urN linux-2.4.26/drivers/serial/amba_pl011.c linux-2.4.26-vrs1-lnode80/drivers/serial/amba_pl011.c
+--- linux-2.4.26/drivers/serial/amba_pl011.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/serial/amba_pl011.c 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,854 @@
++/*
++ * linux/drivers/char/serial_amba_pl011.c
++ *
++ * Driver for AMBA PrimeCell PL011 serial ports
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * Based on drivers/char/serial_amba.c, which is:
++ * Copyright 1999 ARM Limited
++ * Copyright (C) 2000 Deep Blue Solutions Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/tty.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/serial.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/serial_core.h>
++
++#include <asm/hardware/serial_amba_pl011.h>
++
++#ifdef CONFIG_ARCH_LH79520
++#include <asm/arch/rcpc.h>
++#include <asm/arch/iocon.h>
++#include <asm/arch/gpio.h>
++#endif
++
++#define UART_NR 3
++
++#define SERIAL_AMBA_MAJOR 204
++#define SERIAL_AMBA_MINOR 16
++#define SERIAL_AMBA_NR UART_NR
++
++#define CALLOUT_AMBA_NAME "cuaam"
++#define CALLOUT_AMBA_MAJOR 205
++#define CALLOUT_AMBA_MINOR 16
++#define CALLOUT_AMBA_NR UART_NR
++
++static struct tty_driver normal, callout;
++static struct tty_struct *amba11_table[UART_NR];
++static struct termios *amba11_termios[UART_NR], *amba11_termios_locked[UART_NR];
++#ifdef SUPPORT_SYSRQ
++static struct console amba11_console;
++#endif
++static void amba11uart_tx_chars(struct uart_port *port);
++
++#define AMBA_ISR_PASS_LIMIT 256
++
++/*
++ * Access macros for the AMBA UARTs
++ */
++#define UART_PUT_ICR(p, c) writel((c), (p)->membase + AMBA_UARTICR)
++#define UART_GET_CHAR(p) readb((p)->membase + AMBA_UARTDR)
++#define UART_PUT_CHAR(p, c) writel((c), (p)->membase + AMBA_UARTDR)
++#define UART_GET_RSR(p) readb((p)->membase + AMBA_UARTRSR)
++#define UART_GET_LCRH(p) readb((p)->membase + AMBA_UARTLCR_H)
++#define UART_PUT_LCRH(p,c) writel((c), (p)->membase + AMBA_UARTLCR_H)
++
++#define UART_RX_DATA(s) (((s) & AMBA_UARTFR_RXFE) == 0)
++#define UART_TX_READY(s) (((s) & AMBA_UARTFR_TXFF) == 0)
++#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & AMBA_UARTFR_TMSK) == 0)
++
++#define UART_GET_INT_STATUS(p) readw((p)->membase + AMBA_UARTMIS)
++#define UART_GET_FR(p) readw((p)->membase + AMBA_UARTFR)
++#define UART_GET_CR(p) readl((p)->membase + AMBA_UARTCR)
++#define UART_PUT_CR(p,c) writel((c), (p)->membase + AMBA_UARTCR)
++#define UART_GET_IMSC(p) readl((p)->membase + AMBA_UARTIMSC)
++#define UART_PUT_IMSC(p,c) writel((c), (p)->membase + AMBA_UARTIMSC)
++#define UART_GET_IBRD(p) readl((p)->membase + AMBA_UARTIBRD)
++#define UART_PUT_IBRD(p,c) writel((c), (p)->membase + AMBA_UARTIBRD)
++
++
++#define UART_DUMMY_RSR_RX 256
++#define UART_PORT_SIZE 64
++
++/*
++ * Our private driver data mappings.
++ */
++#define drv_old_status driver_priv
++
++struct uart_amba11_port {
++ struct uart_port port;
++ unsigned int old_status;
++};
++
++static void amba11uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
++{
++ unsigned int mask;
++
++ mask = UART_GET_IMSC( port);
++ mask &= ~AMBA_UARTIMSC_TXIM;
++ UART_PUT_IMSC( port, mask); /* disable Tx interrupts */
++}
++
++
++static void amba11uart_start_tx(struct uart_port *port, unsigned int tty_start)
++{
++ unsigned int mask;
++
++ mask = UART_GET_IMSC(port);
++ if( (mask & AMBA_UARTIMSC_TXIM) == 0) { /* not already enabled */
++ mask |= AMBA_UARTIMSC_TXIM; /* enable Tx interrupts */
++ UART_PUT_IMSC(port, mask);
++
++ amba11uart_tx_chars(port); /* start transmiting */
++ }
++
++}
++
++
++static void amba11uart_stop_rx(struct uart_port *port)
++{
++ unsigned int mask;
++
++ mask = UART_GET_IMSC(port);
++ mask &= ~(AMBA_UARTIMSC_RXIM | AMBA_UARTIMSC_RTIM);
++ UART_PUT_IMSC(port, mask); /* disable Rx interrupts */
++}
++
++
++static void amba11uart_enable_ms(struct uart_port *port)
++{
++ unsigned int mask;
++
++ mask = UART_GET_IMSC( port);
++ mask |= AMBA_UARTIMSC_Modem;
++ UART_PUT_IMSC(port, mask); /* Disable modem interrupts */
++}
++
++static void
++#ifdef SUPPORT_SYSRQ
++amba11uart_rx_chars(struct uart_port *port, struct pt_regs *regs)
++#else
++amba11uart_rx_chars(struct uart_port *port)
++#endif
++{
++ struct tty_struct *tty = port->info->tty;
++ unsigned int status, ch, rsr, max_count = 256;
++
++ status = UART_GET_FR(port);
++ while (UART_RX_DATA(status) && max_count--) {
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
++ tty->flip.tqueue.routine((void *)tty);
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
++ printk(KERN_WARNING "TTY_DONT_FLIP set\n");
++ return;
++ }
++ }
++
++ ch = UART_GET_CHAR(port);
++
++ *tty->flip.char_buf_ptr = ch;
++ *tty->flip.flag_buf_ptr = TTY_NORMAL;
++ port->icount.rx++;
++
++ /*
++ * Note that the error handling code is
++ * out of the main execution path
++ */
++ rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
++ if (rsr & AMBA_UARTRSR_ANY) {
++ if (rsr & AMBA_UARTRSR_BE) {
++ rsr &= ~(AMBA_UARTRSR_FE | AMBA_UARTRSR_PE);
++ port->icount.brk++;
++ if (uart_handle_sysrq_char(port, ch, regs))
++ goto ignore_char;
++ } else if (rsr & AMBA_UARTRSR_PE)
++ port->icount.parity++;
++ else if (rsr & AMBA_UARTRSR_FE)
++ port->icount.frame++;
++ if (rsr & AMBA_UARTRSR_OE)
++ port->icount.overrun++;
++
++ rsr &= port->read_status_mask;
++
++ if (rsr & AMBA_UARTRSR_BE)
++ *tty->flip.flag_buf_ptr = TTY_BREAK;
++ else if (rsr & AMBA_UARTRSR_PE)
++ *tty->flip.flag_buf_ptr = TTY_PARITY;
++ else if (rsr & AMBA_UARTRSR_FE)
++ *tty->flip.flag_buf_ptr = TTY_FRAME;
++ }
++
++ if (uart_handle_sysrq_char(port, ch, regs))
++ goto ignore_char;
++
++ if ((rsr & port->ignore_status_mask) == 0) {
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ tty->flip.count++;
++ }
++ if ((rsr & AMBA_UARTRSR_OE) &&
++ tty->flip.count < TTY_FLIPBUF_SIZE) {
++ /*
++ * Overrun is special, since it's reported
++ * immediately, and doesn't affect the current
++ * character
++ */
++ *tty->flip.char_buf_ptr++ = 0;
++ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
++ tty->flip.count++;
++ }
++ ignore_char:
++ status = UART_GET_FR(port);
++ }
++ tty_flip_buffer_push(tty);
++ return;
++}
++
++static void amba11uart_tx_chars(struct uart_port *port)
++{
++ struct circ_buf *xmit = &port->info->xmit;
++ int count;
++ int status;
++
++ if (port->x_char) {
++ UART_PUT_CHAR(port, port->x_char);
++ port->icount.tx++;
++ port->x_char = 0;
++ return;
++ }
++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
++ amba11uart_stop_tx(port, 0);
++ return;
++ }
++
++ count = port->fifosize >> 1;
++ do {
++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++ port->icount.tx++;
++ if (uart_circ_empty(xmit))
++ break;
++ status = UART_GET_FR(port);
++ } while (UART_TX_READY(status));
++ //FJBwhile (--count > 0);
++
++ if (uart_circ_chars_pending(xmit) <
++ WAKEUP_CHARS)
++ uart_write_wakeup(port);
++
++ if (uart_circ_empty(xmit))
++ amba11uart_stop_tx(port, 0);
++}
++
++static void amba11uart_modem_status(struct uart_port *port)
++{
++ struct uart_amba11_port *uap = (struct uart_amba11_port *) port;
++ unsigned int status, delta;
++
++ UART_PUT_ICR(&uap->port, 0x3ff);
++
++ status = UART_GET_FR(&uap->port) & AMBA_UARTFR_MODEM_ANY;
++ //FJB - check CTS on modem port only (port 1)
++ if(port == (struct uart_port *)UART1_PHYS)
++ {
++ if(GPIOG->dr & 0x01)
++ {
++ //CTS is high meaning STOP SENDING
++ status |= AMBA_UARTFR_CTS;
++ }
++ }
++
++ delta = status ^ uap->old_status;
++ uap->old_status = status;
++
++ if (!delta)
++ return;
++
++ if (delta & AMBA_UARTFR_DCD)
++ uart_handle_dcd_change(&uap->port, (status & AMBA_UARTFR_DCD) == 0);
++
++ if ((delta & AMBA_UARTFR_DSR) == 0)
++ uap->port.icount.dsr++;
++
++ if (delta & AMBA_UARTFR_CTS)
++ uart_handle_cts_change(&uap->port, (status & AMBA_UARTFR_CTS) == 0);
++
++ wake_up_interruptible(&uap->port.info->delta_msr_wait);
++}
++
++static void amba11uart_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++ struct uart_port *port = dev_id;
++ unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
++
++ status = UART_GET_INT_STATUS(port);
++ do {
++ if (status & (AMBA_UART_IS_RT | AMBA_UART_IS_RX))
++
++#ifdef SUPPORT_SYSRQ
++ amba11uart_rx_chars(port, regs);
++#else
++ amba11uart_rx_chars(port);
++#endif
++
++ if (status & AMBA_UART_IS_TX)
++ amba11uart_tx_chars(port);
++
++
++ if (status & AMBA_UART_IS_MI)
++ amba11uart_modem_status(port);
++
++ if (pass_counter-- == 0)
++ break;
++
++ status = UART_GET_INT_STATUS(port);
++ } while (status & (AMBA_UART_IS_RT | AMBA_UART_IS_RX |
++ AMBA_UART_IS_TX));
++}
++
++static unsigned int amba11uart_tx_empty(struct uart_port *port)
++{
++ return UART_GET_FR(port) & AMBA_UARTFR_BUSY ? 0 : TIOCSER_TEMT;
++}
++
++static unsigned int amba11uart_get_mctrl(struct uart_port *port)
++{
++ unsigned int result = 0;
++ unsigned int status;
++
++ status = UART_GET_FR(port);
++ if ((status & AMBA_UARTFR_DCD) == 0)
++ result |= TIOCM_CAR;
++ if ((status & AMBA_UARTFR_DSR) == 0)
++ result |= TIOCM_DSR;
++ if ((status & AMBA_UARTFR_CTS) == 0)
++ result |= TIOCM_CTS;
++
++ return result;
++}
++
++static void amba11uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
++{
++ u_int cr;
++
++ cr = UART_GET_CR( port);
++
++ if (mctrl & TIOCM_RTS)
++ cr &= ~AMBA_UARTCR_RTS;
++ else
++ cr |= AMBA_UARTCR_RTS;
++
++ if (mctrl & TIOCM_DTR)
++ cr &= ~AMBA_UARTCR_DTR;
++ else
++ cr |= AMBA_UARTCR_DTR;
++
++ UART_PUT_CR( port, cr);
++}
++
++
++static void amba11uart_break_ctl(struct uart_port *port, int break_state)
++{
++ unsigned int lcr_h;
++ unsigned long flags;
++
++ spin_lock_irqsave(&port->lock, flags);
++ lcr_h = UART_GET_LCRH(port);
++ if (break_state == -1)
++ lcr_h |= AMBA_UARTLCR_H_BRK;
++ else
++ lcr_h &= ~AMBA_UARTLCR_H_BRK;
++ UART_PUT_LCRH(port, lcr_h);
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++static int amba11uart_startup(struct uart_port *port)
++{
++ int retval;
++ struct uart_amba11_port *uap = (struct uart_amba11_port *)port;
++
++ /*
++ * Allocate the IRQ
++ */
++ retval = request_irq(port->irq, amba11uart_int, 0, "amba", port);
++ if (retval)
++ return retval;
++
++ /*
++ * initialise the old status of the modem signals
++ */
++ uap->old_status = UART_GET_FR(port) & AMBA_UARTFR_MODEM_ANY;
++
++ /*
++ * Finally, enable interrupts
++ */
++#ifdef CONFIG_ARCH_LH79520
++ {
++ /*
++ * enable the clock to the serial ports
++ */
++ rcpcRegs_t *rcpc = (rcpcRegs_t *)IO_ADDRESS( RCPC_PHYS);
++ ioconRegs_t *iocon = (ioconRegs_t *)IO_ADDRESS( IOCON_PHYS);
++
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED; /* unlock RCPC registers */
++ barrier();
++
++ rcpc->periphClkCtrl &= ~(RCPC_CLKCTRL_U0_DISABLE | RCPC_CLKCTRL_U1_DISABLE | RCPC_CLKCTRL_U2_DISABLE) ;
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED; /* lock RCPC registers */
++
++ /* set multiplexed pins for UART0 use */
++ iocon->UARTMux |= (UARTMUX_UT0TXD | UARTMUX_UT0RXD);
++ }
++#endif /* CONFIG_ARCH_LH79520 */
++
++ /*
++ * Use iobase to store a pointer to info. We need this to start a
++ * transmission as the tranmittr interrupt is only generated on
++ * the transition to the idle state
++ */
++
++ UART_PUT_IMSC( port, (AMBA_UARTIMSC_RXIM | AMBA_UARTIMSC_RTIM) );
++ UART_PUT_CR( port, (AMBA_UARTCR_UARTEN | AMBA_UARTCR_RXE | AMBA_UARTCR_TXE));
++
++ return 0;
++}
++
++static void amba11uart_shutdown(struct uart_port *port)
++{
++ /*
++ * Free the interrupt
++ */
++ free_irq(port->irq, port);
++
++ /*
++ * disable all interrupts, disable the port
++ */
++ UART_PUT_CR(port, 0);
++
++ /* disable break condition and fifos */
++ UART_PUT_LCRH(port, UART_GET_LCRH(port) &
++ ~(AMBA_UARTLCR_H_BRK | AMBA_UARTLCR_H_FEN));
++}
++
++static void amba11uart_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot)
++{
++ unsigned int lcr_h, old_cr;
++ unsigned long flags;
++ unsigned long old_imsc;
++
++#if DEBUG
++ printk("amba11uart_set_cflag(0x%x) called\n", cflag);
++#endif
++ /* byte size and parity */
++ switch (cflag & CSIZE) {
++ case CS5: lcr_h = AMBA_UARTLCR_H_WLEN_5; break;
++ case CS6: lcr_h = AMBA_UARTLCR_H_WLEN_6; break;
++ case CS7: lcr_h = AMBA_UARTLCR_H_WLEN_7; break;
++ default: lcr_h = AMBA_UARTLCR_H_WLEN_8; break; // CS8
++ }
++ if (cflag & CSTOPB)
++ lcr_h |= AMBA_UARTLCR_H_STP2;
++ if (cflag & PARENB) {
++ lcr_h |= AMBA_UARTLCR_H_PEN;
++ if (!(cflag & PARODD))
++ lcr_h |= AMBA_UARTLCR_H_EPS;
++ }
++ if (port->fifosize > 1)
++ lcr_h |= AMBA_UARTLCR_H_FEN;
++
++ spin_lock_irqsave(&port->lock, flags);
++
++ port->read_status_mask = AMBA_UARTRSR_OE;
++ if (iflag & INPCK)
++ port->read_status_mask |= AMBA_UARTRSR_FE | AMBA_UARTRSR_PE;
++ if (iflag & (BRKINT | PARMRK))
++ port->read_status_mask |= AMBA_UARTRSR_BE;
++
++ /*
++ * Characters to ignore
++ */
++ port->ignore_status_mask = 0;
++ if (iflag & IGNPAR)
++ port->ignore_status_mask |= AMBA_UARTRSR_FE | AMBA_UARTRSR_PE;
++ if (iflag & IGNBRK) {
++ port->ignore_status_mask |= AMBA_UARTRSR_BE;
++ /*
++ * If we're ignoring parity and break indicators,
++ * ignore overruns too (for real raw support).
++ */
++ if (iflag & IGNPAR)
++ port->ignore_status_mask |= AMBA_UARTRSR_OE;
++ }
++
++ /*
++ * Ignore all characters if CREAD is not set.
++ */
++ if ((cflag & CREAD) == 0)
++ port->ignore_status_mask |= UART_DUMMY_RSR_RX;
++
++ old_cr = UART_GET_CR( port);
++ old_imsc = UART_GET_IMSC( port) & ~AMBA_UARTIMSC_Modem;
++
++ if (UART_ENABLE_MS(port, cflag))
++ old_imsc |= AMBA_UARTIMSC_Modem;
++
++ /* Set baud rate */
++ UART_PUT_IBRD( port, quot);
++
++ /*
++ * ----------v----------v----------v----------v-----
++ * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
++ * ----------^----------^----------^----------^-----
++ */
++ UART_PUT_LCRH(port, lcr_h);
++ UART_PUT_IMSC( port, old_imsc);
++ UART_PUT_CR(port, old_cr);
++
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++static const char *amba11uart_type(struct uart_port *port)
++{
++ return port->type == PORT_AMBA_PL011 ? "AMBA PrimeCell PL011" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void amba11uart_release_port(struct uart_port *port)
++{
++ release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int amba11uart_request_port(struct uart_port *port)
++{
++ return request_mem_region(port->mapbase, UART_PORT_SIZE, "serial_amba")
++ != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void amba11uart_config_port(struct uart_port *port, int flags)
++{
++ if (flags & UART_CONFIG_TYPE) {
++ port->type = PORT_AMBA_PL011;
++ amba11uart_request_port(port);
++ }
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int amba11uart_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++ int ret = 0;
++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA_PL011)
++ ret = -EINVAL;
++ if (ser->irq < 0 || ser->irq >= NR_IRQS)
++ ret = -EINVAL;
++ if (ser->baud_base < 9600)
++ ret = -EINVAL;
++ return ret;
++}
++
++static struct uart_ops amba11_pops = {
++ tx_empty: amba11uart_tx_empty,
++ set_mctrl: amba11uart_set_mctrl,
++ get_mctrl: amba11uart_get_mctrl,
++ stop_tx: amba11uart_stop_tx,
++ start_tx: amba11uart_start_tx,
++ stop_rx: amba11uart_stop_rx,
++ enable_ms: amba11uart_enable_ms,
++ break_ctl: amba11uart_break_ctl,
++ startup: amba11uart_startup,
++ shutdown: amba11uart_shutdown,
++ change_speed: amba11uart_change_speed,
++ type: amba11uart_type,
++ release_port: amba11uart_release_port,
++ request_port: amba11uart_request_port,
++ config_port: amba11uart_config_port,
++ verify_port: amba11uart_verify_port,
++};
++
++static struct uart_amba11_port amba11_ports[UART_NR] = {
++ {
++ .port = {
++ .membase= (void *)IO_ADDRESS(UART0_PHYS), // VA
++ .mapbase= UART0_PHYS,
++ .iotype= SERIAL_IO_MEM,
++ .irq= IRQ_UART0,
++ .uartclk= 14745600,
++ .fifosize= 16,
++ .ops= &amba11_pops,
++ .flags= ASYNC_BOOT_AUTOCONF,
++ .line= 0,
++ },
++ },
++ {
++ .port = {
++ .membase= (void *)IO_ADDRESS(UART1_PHYS),
++ .mapbase= UART1_PHYS,
++ .iotype= SERIAL_IO_MEM,
++ .irq= IRQ_UART1,
++ .uartclk= 14745600,
++ .fifosize= 16,
++ .ops= &amba11_pops,
++ .flags= ASYNC_BOOT_AUTOCONF,
++ .line= 1,
++ },
++ },
++ {
++ .port = {
++ .membase= (void *)IO_ADDRESS(UART2_PHYS),
++ .mapbase= UART2_PHYS,
++ .iotype= SERIAL_IO_MEM,
++ .irq= IRQ_UART2,
++ .uartclk= 14745600,
++ .fifosize= 16,
++ .ops= &amba11_pops,
++ .flags= ASYNC_BOOT_AUTOCONF,
++ .line= 2,
++ },
++ },
++};
++
++
++#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int amba11uart_console_read(struct uart_port *port, char *s, u_int count)
++{
++ unsigned int status;
++ int c;
++#if DEBUG
++ printk("amba11uart_console_read() called\n");
++#endif
++
++ c = 0;
++ while (c < count) {
++ status = UART_GET_FR(port);
++ if (UART_RX_DATA(status)) {
++ *s++ = UART_GET_CHAR(port);
++ c++;
++ } else {
++ // nothing more to get, return
++ return c;
++ }
++ }
++ // return the count
++ return c;
++}
++#endif
++
++static void amba11uart_console_write(struct console *co, const char *s, u_int count)
++{
++ struct uart_port *port = &amba11_ports[co->index].port;
++ unsigned int status;
++ int i;
++
++ /*
++ * First save the CR then disable the interrupts
++ */
++ unsigned int old_imsc;
++ old_imsc = UART_GET_IMSC( port);
++ UART_PUT_IMSC( port, 0);
++
++ /*
++ * Now, do each character
++ */
++ for (i = 0; i < count; i++) {
++ do {
++ status = UART_GET_FR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, s[i]);
++ if (s[i] == '\n') {
++ do {
++ status = UART_GET_FR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, '\r');
++ }
++ }
++
++ /*
++ * Finally, wait for transmitter to become empty
++ * and restore the TCR
++ */
++ do {
++ status = UART_GET_FR(port);
++ } while (status & AMBA_UARTFR_BUSY);
++ UART_PUT_IMSC( port, old_imsc);
++}
++
++static kdev_t amba11uart_console_device(struct console *co)
++{
++ return MKDEV(SERIAL_AMBA_MAJOR, SERIAL_AMBA_MINOR + co->index);
++}
++
++static int amba11uart_console_wait_key(struct console *co)
++{
++ struct uart_port *port = &amba11_ports[co->index].port;
++ unsigned int status;
++
++ do {
++ status = UART_GET_FR(port);
++ } while (!UART_RX_DATA(status));
++ return UART_GET_CHAR(port);
++}
++
++static void __init
++amba11uart_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++ if (UART_GET_CR(port) & AMBA_UARTCR_UARTEN) {
++ unsigned int lcr_h, quot;
++ lcr_h = UART_GET_LCRH(port);
++
++ *parity = 'n';
++ if (lcr_h & AMBA_UARTLCR_H_PEN) {
++ if (lcr_h & AMBA_UARTLCR_H_EPS)
++ *parity = 'e';
++ else
++ *parity = 'o';
++ }
++
++ if ((lcr_h & 0x60) == AMBA_UARTLCR_H_WLEN_7)
++ *bits = 7;
++ else
++ *bits = 8;
++
++ quot = UART_GET_IBRD(port);
++ *baud = port->uartclk / (16 * quot );
++ }
++}
++
++static int __init amba11uart_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 38400;
++ int bits = 8;
++ int parity = 'n';
++ int flow = 'n';
++
++ /*
++ * Check whether an invalid uart number has been specified, and
++ * if so, search for the first available port that does have
++ * console support.
++ */
++ if (co->index >= UART_NR)
++ co->index = 0;
++ port = &amba11_ports[co->index].port;
++
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++ else
++ amba11uart_console_get_options(port, &baud, &parity, &bits);
++
++ return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct console amba11_console = {
++ name: "ttyAM",
++ write: amba11uart_console_write,
++#ifdef used_and_not_const_char_pointer
++ read: amba11uart_console_read,
++#endif
++ device: amba11uart_console_device,
++ setup: amba11uart_console_setup,
++ flags: CON_PRINTBUFFER,
++ index: -1,
++};
++
++void __init amba11uart_console_init(void)
++{
++ register_console(&amba11_console);
++}
++
++#define AMBA_CONSOLE &amba11_console
++#else
++#define AMBA_CONSOLE NULL
++#endif
++
++static struct uart_driver amba11_reg = {
++ owner: THIS_MODULE,
++ normal_major: SERIAL_AMBA_MAJOR,
++#ifdef CONFIG_DEVFS_FS
++ normal_name: "ttyAM%d",
++ callout_name: "cuaam%d",
++#else
++ normal_name: "ttyAM",
++ callout_name: "cuaam",
++#endif
++ normal_driver: &normal,
++ callout_major: CALLOUT_AMBA_MAJOR,
++ callout_driver: &callout,
++ table: amba11_table,
++ termios: amba11_termios,
++ termios_locked: amba11_termios_locked,
++ minor: SERIAL_AMBA_MINOR,
++ nr: UART_NR,
++ cons: AMBA_CONSOLE,
++};
++
++static int __init amba11uart_init(void)
++{
++ int ret;
++
++ ret = uart_register_driver(&amba11_reg);
++ if (ret == 0) {
++ int i;
++
++ for (i = 0; i < UART_NR; i++)
++ uart_add_one_port(&amba11_reg, &amba11_ports[i].port);
++ }
++ return ret;
++};
++
++static void __exit amba11uart_exit(void)
++{
++ int i;
++
++ for (i = 0; i < UART_NR; i++)
++ uart_remove_one_port(&amba11_reg, &amba11_ports[i].port);
++
++ uart_unregister_driver(&amba11_reg);
++};
++
++module_init(amba11uart_init);
++module_exit(amba11uart_exit);
++
++EXPORT_NO_SYMBOLS;
++
++MODULE_AUTHOR("Lineo, Inc.");
++MODULE_DESCRIPTION("ARM AMBA PrimeCell PL011 serial port driver");
++MODULE_LICENSE("GPL");
++
+diff -urN linux-2.4.26/drivers/serial/Config.in linux-2.4.26-vrs1-lnode80/drivers/serial/Config.in
+--- linux-2.4.26/drivers/serial/Config.in 2005-11-02 16:54:25.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/serial/Config.in 2005-11-02 17:37:31.000000000 -0400
+@@ -20,6 +20,22 @@
+ define_bool CONFIG_SERIAL_INTEGRATOR y
+ fi
+
++ dep_tristate 'ARM PL011 PrimeCell serial port support' CONFIG_SERIAL_AMBA_PL011 $CONFIG_ARCH_LH79520
++
++ if [ "$CONFIG_SERIAL_AMBA" = "y" ]; then
++ bool ' Support for console on AMBA serial port' CONFIG_SERIAL_AMBA_CONSOLE
++ fi
++
++ if [ "$CONFIG_SERIAL_AMBA_PL011" = "y" ]; then
++ bool ' Support for console on ARM PrimeCell PL011 serial port' CONFIG_SERIAL_AMBA_PL011_CONSOLE
++ fi
++
++ dep_tristate 'Sharp LH7A400 serial port support' CONFIG_SERIAL_LH7A400 $CONFIG_ARCH_LH7A400
++
++ if [ "$CONFIG_SERIAL_LH7A400" = "y" ]; then
++ bool ' Support for console on LH7A400 serial port' CONFIG_SERIAL_LH7A400_CONSOLE
++ fi
++
+ dep_tristate 'CLPS711X serial port support' CONFIG_SERIAL_CLPS711X $CONFIG_ARCH_CLPS711X
+ dep_bool ' Support for console on CLPS711X serial port' CONFIG_SERIAL_CLPS711X_CONSOLE $CONFIG_SERIAL_CLPS711X
+
+@@ -57,6 +73,8 @@
+ dep_bool ' Support Bell Technologies HUB6 card' CONFIG_SERIAL_8250_HUB6 $CONFIG_SERIAL_8250_EXTENDED
+
+ if [ "$CONFIG_SERIAL_AMBA" = "y" -o \
++ "$CONFIG_SERIAL_AMBA_PL011" = "y" -o \
++ "$CONFIG_SERIAL_LH7A400" = "y" -o \
+ "$CONFIG_SERIAL_CLPS711X" = "y" -o \
+ "$CONFIG_SERIAL_SA1100" = "y" -o \
+ "$CONFIG_SERIAL_ANAKIN" = "y" -o \
+@@ -67,6 +85,8 @@
+ define_bool CONFIG_SERIAL_CORE y
+ else
+ if [ "$CONFIG_SERIAL_AMBA" = "m" -o \
++ "$CONFIG_SERIAL_AMBA_PL011" = "m" -o \
++ "$CONFIG_SERIAL_LH7A400" = "m" -o \
+ "$CONFIG_SERIAL_CLPS711X" = "m" -o \
+ "$CONFIG_SERIAL_SA1100" = "m" -o \
+ "$CONFIG_SERIAL_ANAKIN" = "m" -o \
+@@ -78,6 +98,8 @@
+ fi
+ fi
+ if [ "$CONFIG_SERIAL_AMBA_CONSOLE" = "y" -o \
++ "$CONFIG_SERIAL_AMBA_PL011_CONSOLE" = "y" -o \
++ "$CONFIG_SERIAL_LH7A400_CONSOLE" = "y" -o \
+ "$CONFIG_SERIAL_CLPS711X_CONSOLE" = "y" -o \
+ "$CONFIG_SERIAL_SA1100_CONSOLE" = "y" -o \
+ "$CONFIG_SERIAL_ANAKIN_CONSOLE" = "y" -o \
+diff -urN linux-2.4.26/drivers/serial/core.c linux-2.4.26-vrs1-lnode80/drivers/serial/core.c
+--- linux-2.4.26/drivers/serial/core.c 2005-11-02 16:54:25.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/serial/core.c 2005-11-02 17:37:32.000000000 -0400
+@@ -1938,6 +1938,7 @@
+ }
+
+ extern void ambauart_console_init(void);
++extern void amba11uart_console_init(void);
+ extern void anakin_console_init(void);
+ extern void clps711xuart_console_init(void);
+ extern void sa1100_rs_console_init(void);
+@@ -1970,6 +1971,12 @@
+ #ifdef CONFIG_SERIAL_UART00_CONSOLE
+ uart00_console_init();
+ #endif
++#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
++ amba11uart_console_init();
++#endif
++#ifdef CONFIG_SERIAL_LH7A400_CONSOLE
++ lh7a400uart_console_init();
++#endif
+ }
+ #endif /* CONFIG_SERIAL_CORE_CONSOLE */
+
+diff -urN linux-2.4.26/drivers/serial/Makefile linux-2.4.26-vrs1-lnode80/drivers/serial/Makefile
+--- linux-2.4.26/drivers/serial/Makefile 2005-11-02 16:54:25.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/serial/Makefile 2005-11-02 17:37:31.000000000 -0400
+@@ -27,6 +27,8 @@
+ obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y)
+ obj-$(CONFIG_SERIAL_ANAKIN) += anakin.o
+ obj-$(CONFIG_SERIAL_AMBA) += amba.o
++obj-$(CONFIG_SERIAL_AMBA_PL011) += amba_pl011.o
++obj-$(CONFIG_SERIAL_LH7A400) += serial_lh7a400.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+ obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+ obj-$(CONFIG_SERIAL_UART00) += uart00.o
+diff -urN linux-2.4.26/drivers/video/Config.in linux-2.4.26-vrs1-lnode80/drivers/video/Config.in
+--- linux-2.4.26/drivers/video/Config.in 2005-11-02 16:54:25.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/video/Config.in 2005-11-02 17:37:32.000000000 -0400
+@@ -40,6 +40,11 @@
+ dep_bool ' CLPS711X LCD support' CONFIG_FB_CLPS711X $CONFIG_ARCH_CLPS711X
+ dep_bool ' SA-1100 LCD support' CONFIG_FB_SA1100 $CONFIG_ARCH_SA1100
+ dep_bool ' MX1ADS LCD support' CONFIG_FB_DBMX1 $CONFIG_ARCH_MX1ADS
++ if [ "$CONFIG_ARCH_LH79520" = "y" -o \
++ "$CONFIG_ARCH_LH7A400" = "y" ];then
++ bool ' ARM PL110 LCD support' CONFIG_FB_PL110
++ fi
++
+ if [ "$CONFIG_FB_SA1100" = "y" -a "$CONFIG_SA1100_CERF" = "y" ]; then
+ choice 'CerfBoard LCD Display Size' \
+ "3.8_Color CONFIG_CERF_LCD_38_A \
+@@ -50,6 +55,15 @@
+ if [ "$CONFIG_FB_SA1100" = "y" -a "$CONFIG_SA1100_CERF_CPLD" = "y" ]; then
+ bool 'Cerfboard Backlight (CerfPDA)' CONFIG_SA1100_CERF_LCD_BACKLIGHT
+ fi
++ if [ "$CONFIG_FB_PL110" = "y" ]; then
++ choice 'LCD Display panel' \
++ "Panasonic CONFIG_PL110_PAN78 \
++ Sharp_LQ039Q2DS53-HR-TFT CONFIG_PL110_LQ39 \
++ Sharp_LM057QCTT03-QVGA-STN CONFIG_PL110_LM57 \
++ Sharp_LQ057Q3DC02-VGA/QVGA-TFT CONFIG_PL110_LQ57 \
++ Sharp_LQ121S1DG31-800x600-TFT CONFIG_PL110_LQ121 \
++ Sharp_LQ104V1DG11-640x480-TFT CONFIG_PL110_LQ104" Sharp_LQ039Q2DS53-HR-TFT
++ fi
+ fi
+ dep_tristate ' CyberPro 2000/2010/5000 support' CONFIG_FB_CYBER2000 $CONFIG_PCI
+ if [ "$CONFIG_APOLLO" = "y" ]; then
+@@ -280,7 +294,8 @@
+ "$CONFIG_FB_MAC" = "y" -o "$CONFIG_FB_RETINAZ3" = "y" -o \
+ "$CONFIG_FB_VIRGE" = "y" -o "$CONFIG_FB_VIRTUAL" = "y" -o \
+ "$CONFIG_FB_BWTWO" = "y" -o "$CONFIG_FB_CLGEN" = "y" -o \
+- "$CONFIG_FB_TX3912" = "y" -o "$CONFIG_FB_CLPS711X" = "y" ]; then
++ "$CONFIG_FB_TX3912" = "y" -o "$CONFIG_FB_CLPS711X" = "y" -o \
++ "$CONFIG_FB_PL110" = "y" ]; then
+ define_tristate CONFIG_FBCON_MFB y
+ else
+ if [ "$CONFIG_FB_ACORN" = "m" -o "$CONFIG_FB_AMIGA" = "m" -o \
+@@ -288,20 +303,22 @@
+ "$CONFIG_FB_MAC" = "m" -o "$CONFIG_FB_RETINAZ3" = "m" -o \
+ "$CONFIG_FB_VIRGE" = "m" -o "$CONFIG_FB_VIRTUAL" = "m" -o \
+ "$CONFIG_FB_BWTWO" = "m" -o "$CONFIG_FB_CLGEN" = "m" -o \
+- "$CONFIG_FB_TX3912" = "m" -o "$CONFIG_FB_CLPS711X" = "m" ]; then
++ "$CONFIG_FB_TX3912" = "m" -o "$CONFIG_FB_CLPS711X" = "m" -o \
++ "$CONFIG_FB_PL110" = "m" ]; then
+ define_tristate CONFIG_FBCON_MFB m
+ fi
+ fi
+ if [ "$CONFIG_FB_ACORN" = "y" -o "$CONFIG_FB_MAC" = "y" -o \
+ "$CONFIG_FB_SA1100" = "y" -o "$CONFIG_FB_VIRTUAL" = "y" -o \
+ "$CONFIG_FB_TX3912" = "y" -o "$CONFIG_FB_CLPS711X" = "y" -o \
+- "$CONFIG_FB_DBMX1" = "y" ]; then
++ "$CONFIG_FB_DBMX1" = "y" -o "$CONFIG_FB_PL110" = "y"]; then
+ define_tristate CONFIG_FBCON_CFB2 y
+ define_tristate CONFIG_FBCON_CFB4 y
+ else
+ if [ "$CONFIG_FB_ACORN" = "m" -o "$CONFIG_FB_MAC" = "m" -o \
+ "$CONFIG_FB_SA1100" = "m" -o "$CONFIG_FB_VIRTUAL" = "m" -o \
+- "$CONFIG_FB_TX3912" = "m" -o "$CONFIG_FB_CLPS711X" = "m" ]; then
++ "$CONFIG_FB_TX3912" = "m" -o "$CONFIG_FB_CLPS711X" = "m" -o \
++ "$CONFIG_FB_PL110" = "m" ]; then
+ define_tristate CONFIG_FBCON_CFB2 m
+ define_tristate CONFIG_FBCON_CFB4 m
+ fi
+@@ -329,6 +346,7 @@
+ "$CONFIG_FB_SIS" = "y" -o "$CONFIG_FB_NEOMAGIC" = "y" -o \
+ "$CONFIG_FB_STI" = "y" -o "$CONFIG_FB_HP300" = "y" -o \
+ "$CONFIG_FB_INTEL" = "y" -o \
++ "$CONFIG_FB_PL110" = "y" -o \
+ "$CONFIG_FB_DBMX1" = "y" ]; then
+ define_tristate CONFIG_FBCON_CFB8 y
+ else
+@@ -352,6 +370,7 @@
+ "$CONFIG_FB_RADEON" = "m" -o "$CONFIG_FB_INTEL" = "m" -o \
+ "$CONFIG_FB_SA1100" = "m" -o "$CONFIG_FB_SIS" = "m" -o \
+ "$CONFIG_FB_TX3912" = "m" -o "$CONFIG_FB_NEOMAGIC" = "m" -o \
++ "$CONFIG_FB_PL110" = "m" -o \
+ "$CONFIG_FB_STI" = "m" -o "$CONFIG_FB_INTEL" = "m" ]; then
+ define_tristate CONFIG_FBCON_CFB8 m
+ fi
+@@ -373,6 +392,7 @@
+ "$CONFIG_FB_PVR2" = "y" -o "$CONFIG_FB_VOODOO1" = "y" -o \
+ "$CONFIG_FB_NEOMAGIC" = "y" -o "$CONFIG_FB_INTEL" = "y" -o \
+ "$CONFIG_FB_ANAKIN" = "y" -o \
++ "$CONFIG_FB_PL110" = "y" -o \
+ "$CONFIG_FB_DBMX1" = "y" ]; then
+ define_tristate CONFIG_FBCON_CFB16 y
+ else
+@@ -390,6 +410,7 @@
+ "$CONFIG_FB_CYBER2000" = "m" -o "$CONFIG_FB_SIS" = "m" -o \
+ "$CONFIG_FB_SA1100" = "m" -o "$CONFIG_FB_RADEON" = "m" -o \
+ "$CONFIG_FB_INTEL" = "m" -o \
++ "$CONFIG_FB_PL110" = "m" -o \
+ "$CONFIG_FB_PVR2" = "m" -o "$CONFIG_FB_VOODOO1" = "m" -o \
+ "$CONFIG_FB_NEOMAGIC" = "m" -o "$CONFIG_FB_INTEL" = "m" ]; then
+ define_tristate CONFIG_FBCON_CFB16 m
+diff -urN linux-2.4.26/drivers/video/fbcon.c linux-2.4.26-vrs1-lnode80/drivers/video/fbcon.c
+--- linux-2.4.26/drivers/video/fbcon.c 2003-08-25 07:44:42.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/video/fbcon.c 2005-11-02 17:37:32.000000000 -0400
+@@ -2401,9 +2401,9 @@
+ p->type == FB_TYPE_INTERLEAVED_PLANES)) {
+
+ /* monochrome */
+- unsigned char inverse = p->inverse || p->visual == FB_VISUAL_MONO01
+- ? 0x00 : 0xff;
+-
++ //FJBunsigned char inverse = p->inverse || p->visual == FB_VISUAL_MONO01
++ //FJB ? 0x00 : 0xff;
++ unsigned char inverse = 0;
+ int is_hga = !strncmp(p->fb_info->modename, "HGA", 3);
+ /* can't use simply memcpy because need to apply inverse */
+ for( y1 = 0; y1 < LOGO_H; y1++ ) {
+diff -urN linux-2.4.26/drivers/video/fbmem.c linux-2.4.26-vrs1-lnode80/drivers/video/fbmem.c
+--- linux-2.4.26/drivers/video/fbmem.c 2005-11-02 16:54:25.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/video/fbmem.c 2005-11-02 17:37:32.000000000 -0400
+@@ -109,6 +109,7 @@
+ extern int chips_init(void);
+ extern int g364fb_init(void);
+ extern int sa1100fb_init(void);
++extern int pl110fb_init(void);
+ extern int fm2fb_init(void);
+ extern int fm2fb_setup(char*);
+ extern int q40fb_init(void);
+@@ -305,6 +306,9 @@
+ #ifdef CONFIG_FB_SA1100
+ { "sa1100", sa1100fb_init, NULL },
+ #endif
++#ifdef CONFIG_FB_PL110
++ { "pl110", pl110fb_init, NULL },
++#endif
+ #ifdef CONFIG_FB_SUN3
+ { "sun3", sun3fb_init, sun3fb_setup },
+ #endif
+diff -urN linux-2.4.26/drivers/video/Makefile linux-2.4.26-vrs1-lnode80/drivers/video/Makefile
+--- linux-2.4.26/drivers/video/Makefile 2005-11-02 16:54:25.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/video/Makefile 2005-11-02 17:37:32.000000000 -0400
+@@ -4,6 +4,14 @@
+
+ O_TARGET := video.o
+
++#
++# The following is VERY IMPORTANT for the pl110; newer gccs won't compile the driver
++# properly and it will hang at "Console: switching to colour frame buffer device ..."
++#
++ifeq ($(CONFIG_FB_PL110),y)
++EXTRA_CFLAGS =-O1
++endif
++
+ mod-subdirs := matrox sti
+
+ # All of the (potential) objects that export symbols.
+@@ -15,7 +23,7 @@
+ fbcon-iplan2p8.o fbcon-vga-planes.o fbcon-cfb16.o \
+ fbcon-cfb2.o fbcon-cfb24.o fbcon-cfb32.o fbcon-cfb4.o \
+ fbcon-cfb8.o fbcon-mac.o fbcon-mfb.o \
+- cyber2000fb.o sa1100fb.o fbcon-hga.o fbgen.o
++ cyber2000fb.o sa1100fb.o fbcon-hga.o fbgen.o pl110fb.o
+
+ # Each configuration option enables a list of files.
+
+@@ -137,6 +145,7 @@
+ obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+ obj-$(CONFIG_FB_ANAKIN) += anakinfb.o
++obj-$(CONFIG_FB_PL110) += pl110fb.o
+
+ # Generic Low Level Drivers
+
+diff -urN linux-2.4.26/drivers/video/pl110fb.c linux-2.4.26-vrs1-lnode80/drivers/video/pl110fb.c
+--- linux-2.4.26/drivers/video/pl110fb.c 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/video/pl110fb.c 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,1719 @@
++/*
++ * linux/drivers/video/pl110fb.c
++ *
++ * ARM PrimeCell PL110 LCD Controller Frame Buffer Driver
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ * Based on sa1100fb.c, which is Copyright (C) Eric A. Thomas
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/fb.h>
++#include <linux/delay.h>
++#include <linux/pm.h>
++#include <linux/init.h>
++#include <linux/cpufreq.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/uaccess.h>
++
++#include <video/fbcon.h>
++#include <video/fbcon-mfb.h>
++#include <video/fbcon-cfb4.h>
++#include <video/fbcon-cfb8.h>
++#include <video/fbcon-cfb16.h>
++
++#ifdef CONFIG_ARCH_LH79520
++#include <asm/arch/rcpc.h>
++#include <asm/arch/cpld.h>
++#include <asm/arch/iocon.h>
++#endif
++
++#ifdef CONFIG_ARCH_LH7A400
++#include <asm/arch/cpld.h>
++#include <asm/arch/gpio.h>
++#endif
++
++/*
++ * debugging?
++ */
++#define DEBUG 0
++/*
++ * Complain if VAR is out of range.
++ */
++#define DEBUG_VAR 1
++#define BACKLIGHT _BIT(15)
++//#define GPOUT16 (*(volatile u16*)GPOUT16_BASE)
++
++//#define GPOUT16 (*(volatile u16*)GPOUT16_BASE)
++
++// global defined in marm-lh7x.c -- driver
++extern unsigned short marm_backlight;
++#define GPOUT16 marm_backlight
++
++#include "pl110fb.h"
++
++extern unsigned int hclkfreq_get( void);
++
++void (*pl110fb_blank_helper)(int blank);
++EXPORT_SYMBOL(pl110fb_blank_helper);
++
++
++//#define _444 1
++#define _555 1
++
++#if _444
++static struct pl110fb_rgb rgb_8 = {
++ red: { offset: 0, length: 4, },
++ green: { offset: 0, length: 4, },
++ blue: { offset: 0, length: 4, },
++ transp: { offset: 0, length: 0, },
++};
++#elif _555
++static struct pl110fb_rgb rgb_8 = {
++ red: { offset: 0, length: 5, },
++ green: { offset: 0, length: 5, },
++ blue: { offset: 0, length: 5, },
++ transp: { offset: 0, length: 0, },
++};
++#else
++#error define _444 or _555
++#endif
++
++
++#if 0 // 5-6-5
++static struct pl110fb_rgb def_rgb_16 = {
++ red: { offset: 11, length: 5, },
++ green: { offset: 5, length: 6, },
++ blue: { offset: 0, length: 5, },
++ transp: { offset: 0, length: 0, },
++};
++#else // 5-5-5
++static struct pl110fb_rgb def_rgb_16 = {
++ red: { offset: 10, length: 5, },
++ green: { offset: 5, length: 5, },
++ blue: { offset: 0, length: 5, },
++ transp: { offset: 0, length: 0, },
++};
++#endif
++
++
++#define VERTICAL_REFRESH 70 /* optimum refresh rate, in Hz. */
++
++
++#if defined(CONFIG_ARCH_LH79520) || defined(CONFIG_ARCH_LH7A400)
++static struct pl110fb_mach_info lh_info __initdata = {
++
++#if defined(CONFIG_PL110_LQ39)
++ bpp: 8,
++ xres: 640, yres: 480,
++ hsync_len: 13, /* hsw */ vsync_len: 2, /* vsw */
++ left_margin: 21, /* hbp */ upper_margin: 5, /* vbp */
++ right_margin: 11, /* hfp */ lower_margin: 5, /* vfp */
++
++ sync: FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
++
++ LCDtiming2: 0,
++
++ LCDtiming3: 0,
++
++ LCDcontrol: LCD_CTRL_BW_COLOR | LCD_CTRL_WATERMARK ,
++
++ LCDICPcontrol: 0, //LCDICP_CONTROL_CLSEN | LCDICP_CONTROL_SPSEN,
++
++ LCDICPsetup: LCDICP_SETUP_VERT_NORMAL | LCDICP_SETUP_HORIZ_NORMAL,
++
++ LCDICPtiming1: LCDICP_TIMING1_PSDEL(9) | LCDICP_TIMING1_REVDEL(3) | LCDICP_TIMING1_LPDEL(14),
++
++ LCDICPtiming2: LCDICP_TIMING2_PSDEL2(209) | LCDICP_TIMING2_SPLVALUE(34),
++
++ /*
++ * The Sharp LQ039Q2DS53 panel takes an RGB666 signal,
++ * but we provide it with an RGB555 signal instead (def_rgb_16).
++ */
++
++ /* bpp set based on DIP switches on LCD board */
++
++// xres: 320, yres: 240,
++// hsync_len: 13, /* hsw */ vsync_len: 2, /* vsw */
++// left_margin: 21, /* hbp */ upper_margin: 5, /* vbp */
++// right_margin: 11, /* hfp */ lower_margin: 5, /* vfp */
++
++// sync: FB_SYNC_VERT_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++
++// LCDtiming2: LCD_TIMING2_IPC,
++//
++// LCDtiming3: 0,
++//
++// LCDcontrol: LCD_CTRL_TFT | LCD_CTRL_BW_COLOR | LCD_CTRL_WATERMARK,
++//
++// LCDICPcontrol: LCDICP_CONTROL_CLSEN | LCDICP_CONTROL_SPSEN,
++//
++// LCDICPsetup: LCDICP_SETUP_MODE_HRTFT | LCDICP_SETUP_VERT_NORMAL | LCDICP_SETUP_HORIZ_NORMAL,
++//
++// LCDICPtiming1: LCDICP_TIMING1_PSDEL(9) | LCDICP_TIMING1_REVDEL(3) | LCDICP_TIMING1_LPDEL(14),
++//
++// LCDICPtiming2: LCDICP_TIMING2_PSDEL2(209) | LCDICP_TIMING2_SPLVALUE(34),
++
++
++#elif defined(CONFIG_PL110_PAN78)
++ bpp: 8,
++ xres: 640, yres: 480,
++ hsync_len: 13, /* hsw */ vsync_len: 2, /* vsw */
++ left_margin: 21, /* hbp */ upper_margin: 5, /* vbp */
++ right_margin: 11, /* hfp */ lower_margin: 5, /* vfp */
++
++ sync: FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
++
++ LCDtiming2: 0,
++
++ LCDtiming3: 0,
++
++ LCDcontrol: LCD_CTRL_BW_COLOR | LCD_CTRL_WATERMARK,
++
++ LCDICPcontrol: 0, //LCDICP_CONTROL_CLSEN | LCDICP_CONTROL_SPSEN,
++
++ LCDICPsetup: LCDICP_SETUP_VERT_NORMAL | LCDICP_SETUP_HORIZ_NORMAL,
++
++ LCDICPtiming1: LCDICP_TIMING1_PSDEL(9) | LCDICP_TIMING1_REVDEL(3) | LCDICP_TIMING1_LPDEL(14),
++
++ LCDICPtiming2: LCDICP_TIMING2_PSDEL2(209) | LCDICP_TIMING2_SPLVALUE(34),
++
++#elif defined(CONFIG_PL110_LM57)
++ bpp: 8,
++ xres: 320, yres: 240,
++#elif defined(CONFIG_PL110_LQ57)
++ bpp: 8,
++ xres: 240, yres: 320,
++#elif defined(CONFIG_PL110_LQ121)
++ bpp: 4,
++ xres: 320, yres: 240,
++#elif defined(CONFIG_PL110_LQ101)
++#else
++#error "You must have an LCD panel configured"
++#endif
++};
++#endif // CONFIG_ARCH_LH79520 || CONFIG_ARCH_LH7A400
++
++
++
++static struct pl110fb_mach_info * __init
++pl110fb_get_machine_info(struct pl110fb_info *fbi)
++{
++ struct pl110fb_mach_info *inf = NULL;
++
++#if defined(CONFIG_ARCH_LH79520)
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ u8 dipSw = (u8)~(cpld->display_dip_sw & 0xff);
++
++ if( machine_is_lh79520evb()) {
++ inf = &lh_info;
++
++ /* set bpp based on LCD board dip switch 0 */
++ inf->bpp = 8; //(dipSw & 1 ? 8 : 16);
++ }
++#endif
++#if defined(CONFIG_ARCH_LH7A400)
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ u8 dipSw = (u8)~(cpld->u3.dispDipSw & 0xff);
++
++ if( machine_is_lh7a400evb()) {
++ inf = &lh_info;
++
++ /* set bpp based on LCD board dip switch 0 */
++ inf->bpp = (dipSw & 1 ? 8 : 16);
++ }
++#endif
++ return inf;
++}
++
++
++static int pl110fb_activate_var(struct fb_var_screeninfo *var, struct pl110fb_info *);
++static void set_ctrlr_state(struct pl110fb_info *fbi, u_int state);
++
++
++static inline void
++pl110fb_schedule_task(struct pl110fb_info *fbi, u_int state)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ /*
++ * We need to handle two requests being made at the same time.
++ * There are two important cases:
++ * 1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
++ * We must perform the unblanking, which will do our REENABLE for us.
++ * 2. When we are blanking, but immediately unblank before we have
++ * blanked. We do the "REENABLE" thing here as well, just to be sure.
++ */
++ if (fbi->task_state == C_ENABLE && state == C_REENABLE)
++ state = (u_int) -1;
++ if (fbi->task_state == C_DISABLE && state == C_ENABLE)
++ state = C_REENABLE;
++
++ if (state != (u_int)-1) {
++ fbi->task_state = state;
++ schedule_task(&fbi->task);
++ }
++ local_irq_restore(flags);
++}
++
++/*
++ * Get the VAR structure pointer for the specified console
++ */
++static inline struct fb_var_screeninfo *
++get_con_var(struct fb_info *info, int con)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ return (con == fbi->currcon || con == -1) ? &fbi->fb.var : &fb_display[con].var;
++}
++
++/*
++ * Get the DISPLAY structure pointer for the specified console
++ */
++static inline struct display *
++get_con_display(struct fb_info *info, int con)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ return (con < 0) ? fbi->fb.disp : &fb_display[con];
++}
++
++/*
++ * Get the CMAP pointer for the specified console
++ */
++static inline struct fb_cmap *
++get_con_cmap(struct fb_info *info, int con)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++
++ return (con == fbi->currcon || con == -1) ? &fbi->fb.cmap : &fb_display[con].cmap;
++}
++
++static inline u_int
++chan_to_field(u_int chan, struct fb_bitfield *bf)
++{
++ chan &= 0xffff;
++ chan >>= 16 - bf->length;
++ return chan << bf->offset;
++}
++
++
++static int
++pl110fb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
++ u_int trans, struct fb_info *info)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ u_int val, ret = 1;
++ lcdRegs_t *LCD = (lcdRegs_t *)IO_ADDRESS(LCD_PHYS);
++
++ if (regno < fbi->palette_size) {
++
++#if _444 // 4:4:4
++ val = ((red >> 4) & 0x0F00) >> 7; // bits 4:0
++ val |= ((green >> 8) & 0x00F0) << 2; // bits 9:5
++ val |= ((blue >> 12) & 0x000F) << 11; // bits 14:10
++#else // 5:5:5
++ val = (red & 0xF800) >> 11; // bits 4:0
++ val |= (green & 0xF800) >> 6; // bits 9:5
++ val |= (blue & 0xF800) >> 1; // bits 14:10
++ val |= 0x8000; // always set intensity bit
++#endif
++
++ if( regno & 1) /* setting higher number entry */
++ LCD->palette[regno >> 1] = (LCD->palette[regno >> 1] & 0x0000ffff) | (val << 16);
++ else /* setting lower number entry */
++ LCD->palette[regno >> 1] = (LCD->palette[regno >> 1] & 0xffff0000) | val;
++
++ /* */
++// DPRINTK( "reg=%x r=%x g=%x b=%x t=%x addr=%x val=%x entry=%x\n",
++// regno, red, green, blue, trans, &LCD->palette[regno >> 1], val,
++// LCD->palette[regno >> 1]);
++ /* */
++
++ ret = 0;
++ }
++ return ret;
++}
++
++static int
++pl110fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++ u_int trans, struct fb_info *info)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ struct display *disp = get_con_display(info, fbi->currcon);
++ u_int val;
++ int ret = 1;
++
++ /*
++ * If inverse mode was selected, invert all the colours
++ * rather than the register number. The register number
++ * is what you poke into the framebuffer to produce the
++ * colour you requested.
++ */
++ if (disp->inverse) {
++ red = 0xffff - red;
++ green = 0xffff - green;
++ blue = 0xffff - blue;
++ }
++
++ /*
++ * If greyscale is true, then we convert the RGB value
++ * to greyscale no mater what visual we are using.
++ */
++ if (fbi->fb.var.grayscale)
++ red = green = blue = (19595 * red + 38470 * green +
++ 7471 * blue) >> 16;
++
++ switch (fbi->fb.disp->visual) {
++ case FB_VISUAL_TRUECOLOR:
++ /*
++ * 12 or 16-bit True Colour. We encode the RGB value
++ * according to the RGB bitfield information.
++ */
++ if (regno < 16) {
++ u16 *pal = fbi->fb.pseudo_palette;
++
++ val = chan_to_field(red, &fbi->fb.var.red);
++ val |= chan_to_field(green, &fbi->fb.var.green);
++ val |= chan_to_field(blue, &fbi->fb.var.blue);
++
++ pal[regno] = val;
++ ret = 0;
++ }
++ break;
++
++ case FB_VISUAL_STATIC_PSEUDOCOLOR:
++ case FB_VISUAL_PSEUDOCOLOR:
++ ret = pl110fb_setpalettereg(regno, red, green, blue, trans, info);
++ break;
++ }
++
++ return ret;
++}
++
++/*
++ * pl110fb_display_dma_period()
++ * Calculate the minimum period (in picoseconds) between two DMA
++ * requests for the LCD controller.
++ */
++static unsigned int
++pl110fb_display_dma_period(struct fb_var_screeninfo *var)
++{
++ unsigned int mem_bits_per_pixel;
++
++ mem_bits_per_pixel = var->bits_per_pixel;
++ if (mem_bits_per_pixel == 12)
++ mem_bits_per_pixel = 16;
++
++ /*
++ * Period = pixclock * bits_per_byte * bytes_per_transfer
++ * / memory_bits_per_pixel;
++ */
++ return var->pixclock * 8 * 16 / mem_bits_per_pixel;
++}
++
++/*
++ * pl110fb_decode_var():
++ * Get the video params out of 'var'. If a value doesn't fit, round it up,
++ * if it's too big, return -EINVAL.
++ *
++ * Suggestion: Round up in the following order: bits_per_pixel, xres,
++ * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
++ * bitfields, horizontal timing, vertical timing.
++ */
++static int
++pl110fb_validate_var(struct fb_var_screeninfo *var,
++ struct pl110fb_info *fbi)
++{
++ int ret = -EINVAL;
++
++ if (var->xres < MIN_XRES)
++ var->xres = MIN_XRES;
++ if (var->yres < MIN_YRES)
++ var->yres = MIN_YRES;
++ if (var->xres > fbi->max_xres)
++ var->xres = fbi->max_xres;
++ if (var->yres > fbi->max_yres)
++ var->yres = fbi->max_yres;
++ var->xres_virtual =
++ var->xres_virtual < var->xres ? var->xres : var->xres_virtual;
++ var->yres_virtual =
++ var->yres_virtual < var->yres ? var->yres : var->yres_virtual;
++
++ DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
++ switch (var->bits_per_pixel) {
++#ifdef FBCON_HAS_CFB4
++ case 4: ret = 0; break;
++#endif
++#ifdef FBCON_HAS_CFB8
++ case 8: ret = 0; break;
++#endif
++#ifdef FBCON_HAS_CFB16
++ case 16: ret = 0; break;
++#endif
++ default:
++ break;
++ }
++
++#ifdef CONFIG_CPU_FREQ
++ printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
++ pl110fb_display_dma_period(var),
++ cpufreq_get(smp_processor_id()));
++#endif
++
++ return ret;
++}
++
++
++static void
++pl110fb_hw_set_var(struct fb_var_screeninfo *var, struct pl110fb_info *fbi)
++{
++ u_long palette_mem_size;
++
++ fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
++
++ palette_mem_size = fbi->palette_size * sizeof(u16);
++
++ DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
++
++ fb_set_cmap(&fbi->fb.cmap, 1, pl110fb_setcolreg, &fbi->fb);
++
++ pl110fb_activate_var(var, fbi);
++}
++
++/*
++ * pl110fb_set_var():
++ * Set the user defined part of the display for the specified console
++ */
++static int
++pl110fb_set_var(struct fb_var_screeninfo *var, int con, struct fb_info *info)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ struct fb_var_screeninfo *dvar = get_con_var(&fbi->fb, con);
++ struct display *display = get_con_display(&fbi->fb, con);
++ int err, chgvar = 0, rgbidx;
++
++ DPRINTK("called\n");
++
++ /*
++ * Decode var contents into a par structure, adjusting any
++ * out of range values.
++ */
++ err = pl110fb_validate_var(var, fbi);
++ if (err) {
++ DPRINTK( "pl110fb_validate_var returned err=%d\n", err);
++ return err;
++ }
++
++ if (var->activate & FB_ACTIVATE_TEST)
++ return 0;
++
++ if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_NOW)
++ return -EINVAL;
++
++ if (dvar->xres != var->xres)
++ chgvar = 1;
++ if (dvar->yres != var->yres)
++ chgvar = 1;
++ if (dvar->xres_virtual != var->xres_virtual)
++ chgvar = 1;
++ if (dvar->yres_virtual != var->yres_virtual)
++ chgvar = 1;
++ if (dvar->bits_per_pixel != var->bits_per_pixel)
++ chgvar = 1;
++ if (con < 0)
++ chgvar = 0;
++
++ switch (var->bits_per_pixel) {
++#ifdef FBCON_HAS_CFB4
++ case 4:
++ if (fbi->cmap_static)
++ display->visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
++ else
++ display->visual = FB_VISUAL_PSEUDOCOLOR;
++ display->line_length = var->xres / 2;
++ display->dispsw = &fbcon_cfb4;
++ rgbidx = RGB_8;
++ break;
++#endif
++#ifdef FBCON_HAS_CFB8
++ case 8:
++ if (fbi->cmap_static)
++ display->visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
++ else
++ display->visual = FB_VISUAL_PSEUDOCOLOR;
++ display->line_length = var->xres;
++ display->dispsw = &fbcon_cfb8;
++ rgbidx = RGB_8;
++ break;
++#endif
++#ifdef FBCON_HAS_CFB16
++ case 16:
++ display->visual = FB_VISUAL_TRUECOLOR;
++ display->line_length = var->xres * 2;
++ display->dispsw = &fbcon_cfb16;
++ display->dispsw_data = fbi->fb.pseudo_palette;
++ rgbidx = RGB_16;
++ break;
++#endif
++ default:
++ rgbidx = 0;
++ display->dispsw = &fbcon_dummy;
++ break;
++ }
++
++ display->screen_base = fbi->screen_cpu;
++ display->next_line = display->line_length;
++ display->type = fbi->fb.fix.type;
++ display->type_aux = fbi->fb.fix.type_aux;
++ display->ypanstep = fbi->fb.fix.ypanstep;
++ display->ywrapstep = fbi->fb.fix.ywrapstep;
++ display->can_soft_blank = 1;
++ display->inverse = fbi->cmap_inverse;
++
++ *dvar = *var;
++ dvar->activate &= ~FB_ACTIVATE_ALL;
++
++ /*
++ * Copy the RGB parameters for this display
++ * from the machine specific parameters.
++ */
++ dvar->red = fbi->rgb[rgbidx]->red;
++ dvar->green = fbi->rgb[rgbidx]->green;
++ dvar->blue = fbi->rgb[rgbidx]->blue;
++ dvar->transp = fbi->rgb[rgbidx]->transp;
++
++ DPRINTK("RGBT length = %d:%d:%d:%d\n",
++ dvar->red.length, dvar->green.length, dvar->blue.length,
++ dvar->transp.length);
++
++ DPRINTK("RGBT offset = %d:%d:%d:%d\n",
++ dvar->red.offset, dvar->green.offset, dvar->blue.offset,
++ dvar->transp.offset);
++
++ /*
++ * Update the old var. The fbcon drivers still use this.
++ * Once they are using fbi->fb.var, this can be dropped.
++ */
++ display->var = *dvar;
++
++ /*
++ * If we are setting all the virtual consoles, also set the
++ * defaults used to create new consoles.
++ */
++ if (var->activate & FB_ACTIVATE_ALL)
++ fbi->fb.disp->var = *dvar;
++
++ /*
++ * If the console has changed and the console has defined
++ * a changevar function, call that function.
++ */
++ if (chgvar && info && fbi->fb.changevar)
++ fbi->fb.changevar(con);
++
++ /* If the current console is selected, activate the new var. */
++ if (con != fbi->currcon)
++ return 0;
++
++ pl110fb_hw_set_var(dvar, fbi);
++
++ return 0;
++}
++
++static int
++__do_set_cmap(struct fb_cmap *cmap, int kspc, int con,
++ struct fb_info *info)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ struct fb_cmap *dcmap = get_con_cmap(info, con);
++ int err = 0;
++
++ if (con == -1)
++ con = fbi->currcon;
++
++ /* no colormap allocated? (we always have "this" colour map allocated) */
++ if (con >= 0)
++ err = fb_alloc_cmap(&fb_display[con].cmap, fbi->palette_size, 0);
++
++ if (!err && con == fbi->currcon)
++ err = fb_set_cmap(cmap, kspc, pl110fb_setcolreg, info);
++
++ if (!err)
++ fb_copy_cmap(cmap, dcmap, kspc ? 0 : 1);
++
++ return err;
++}
++
++static int
++pl110fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
++ struct fb_info *info)
++{
++ struct display *disp = get_con_display(info, con);
++
++ if (disp->visual == FB_VISUAL_TRUECOLOR ||
++ disp->visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
++ return -EINVAL;
++
++ return __do_set_cmap(cmap, kspc, con, info);
++}
++
++static int
++pl110fb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info)
++{
++ struct display *display = get_con_display(info, con);
++
++ *fix = info->fix;
++
++ fix->line_length = display->line_length;
++ fix->visual = display->visual;
++ return 0;
++}
++
++static int
++pl110fb_get_var(struct fb_var_screeninfo *var, int con, struct fb_info *info)
++{
++ *var = *get_con_var(info, con);
++ return 0;
++}
++
++static int
++pl110fb_get_cmap(struct fb_cmap *cmap, int kspc, int con, struct fb_info *info)
++{
++ struct fb_cmap *dcmap = get_con_cmap(info, con);
++ fb_copy_cmap(dcmap, cmap, kspc ? 0 : 2);
++ return 0;
++}
++
++static struct fb_ops pl110fb_ops = {
++ owner: THIS_MODULE,
++ fb_get_fix: pl110fb_get_fix,
++ fb_get_var: pl110fb_get_var,
++ fb_set_var: pl110fb_set_var,
++ fb_get_cmap: pl110fb_get_cmap,
++ fb_set_cmap: pl110fb_set_cmap,
++};
++
++/*
++ * pl110fb_switch():
++ * Change to the specified console. Palette and video mode
++ * are changed to the console's stored parameters.
++ *
++ * Uh oh, this can be called from a tasklet (IRQ)
++ */
++static int
++pl110fb_switch(int con, struct fb_info *info)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ struct display *disp;
++ struct fb_cmap *cmap;
++
++ DPRINTK("con=%d info->modename=%s\n", con, fbi->fb.modename);
++
++ if (con == fbi->currcon)
++ return 0;
++
++ if (fbi->currcon >= 0) {
++ disp = fb_display + fbi->currcon;
++
++ /*
++ * Save the old colormap and video mode.
++ */
++ disp->var = fbi->fb.var;
++
++ if (disp->cmap.len)
++ fb_copy_cmap(&fbi->fb.cmap, &disp->cmap, 0);
++ }
++
++ fbi->currcon = con;
++ disp = fb_display + con;
++
++ /*
++ * Make sure that our colourmap contains 256 entries.
++ */
++ fb_alloc_cmap(&fbi->fb.cmap, 256, 0);
++
++ if (disp->cmap.len)
++ cmap = &disp->cmap;
++ else
++ cmap = fb_default_cmap(1 << disp->var.bits_per_pixel);
++
++ fb_copy_cmap(cmap, &fbi->fb.cmap, 0);
++
++ fbi->fb.var = disp->var;
++ fbi->fb.var.activate = FB_ACTIVATE_NOW;
++
++ pl110fb_set_var(&fbi->fb.var, con, info);
++ return 0;
++}
++
++/*
++ * Formal definition of the VESA spec:
++ * On
++ * This refers to the state of the display when it is in full operation
++ * Stand-By
++ * This defines an optional operating state of minimal power reduction with
++ * the shortest recovery time
++ * Suspend
++ * This refers to a level of power management in which substantial power
++ * reduction is achieved by the display. The display can have a longer
++ * recovery time from this state than from the Stand-by state
++ * Off
++ * This indicates that the display is consuming the lowest level of power
++ * and is non-operational. Recovery from this state may optionally require
++ * the user to manually power on the monitor
++ *
++ * Now, the fbdev driver adds an additional state, (blank), where they
++ * turn off the video (maybe by colormap tricks), but don't mess with the
++ * video itself: think of it semantically between on and Stand-By.
++ *
++ * So here's what we should do in our fbdev blank routine:
++ *
++ * VESA_NO_BLANKING (mode 0) Video on, front/back light on
++ * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off
++ * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off
++ * VESA_POWERDOWN (mode 3) Video off, front/back light off
++ *
++ * This will match the matrox implementation.
++ */
++/*
++ * pl110fb_blank():
++ * Blank the display by setting all palette values to zero. Note, the
++ * 12 and 16 bpp modes don't really use the palette, so this will not
++ * blank the display in all modes.
++ */
++static void
++pl110fb_blank(int blank, struct fb_info *info)
++{
++ struct pl110fb_info *fbi = (struct pl110fb_info *)info;
++ int i;
++
++ DPRINTK("pl110fb_blank: blank=%d info->modename=%s\n", blank,
++ fbi->fb.modename);
++
++ switch (blank) {
++ case VESA_POWERDOWN:
++ case VESA_VSYNC_SUSPEND:
++ case VESA_HSYNC_SUSPEND:
++ if (fbi->fb.disp->visual == FB_VISUAL_PSEUDOCOLOR ||
++ fbi->fb.disp->visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
++ for (i = 0; i < fbi->palette_size; i++)
++ pl110fb_setpalettereg(i, 0, 0, 0, 0, info);
++ pl110fb_schedule_task(fbi, C_DISABLE);
++ if (pl110fb_blank_helper)
++ pl110fb_blank_helper(blank);
++ break;
++
++ case VESA_NO_BLANKING:
++ if (pl110fb_blank_helper)
++ pl110fb_blank_helper(blank);
++ if (fbi->fb.disp->visual == FB_VISUAL_PSEUDOCOLOR ||
++ fbi->fb.disp->visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
++ fb_set_cmap(&fbi->fb.cmap, 1, pl110fb_setcolreg, info);
++ pl110fb_schedule_task(fbi, C_ENABLE);
++ }
++}
++
++static int
++pl110fb_updatevar(int con, struct fb_info *info)
++{
++ DPRINTK("entered\n");
++ return 0;
++}
++
++/*
++ * Calculate the PCD value from the clock rate (in picoseconds).
++ * We take account of the PPCR clock setting.
++ */
++static inline int
++get_pcd(unsigned int pixclock)
++{
++ unsigned int pcd;
++
++ if (pixclock) {
++ pcd = hclkfreq_get() / 100000;
++ pcd *= pixclock;
++ pcd /= 10000000;
++ pcd += 1; /* make up for integer math truncations */
++ } else {
++ /*
++ * People seem to be missing this message. Make it big.
++ * Make it stand out. Make sure people see it.
++ */
++ printk(KERN_WARNING "******************************************************\n");
++ printk(KERN_WARNING "** ZERO PIXEL CLOCK DETECTED **\n");
++ printk(KERN_WARNING "** You are using a zero pixclock. This means that **\n");
++ printk(KERN_WARNING "** clock scaling will not be able to adjust your **\n");
++ printk(KERN_WARNING "** your timing parameters appropriately, and the **\n");
++ printk(KERN_WARNING "** bandwidth calculations will fail to work. This **\n");
++ printk(KERN_WARNING "** will shortly become an error condition, which **\n");
++ printk(KERN_WARNING "** will prevent your LCD display working. Please **\n");
++ printk(KERN_WARNING "** send your patches in as soon as possible to shut **\n");
++ printk(KERN_WARNING "** this message up. **\n");
++ printk(KERN_WARNING "******************************************************\n");
++ pcd = 0;
++ }
++
++ DPRINTK( "pcd=%d\n", pcd);
++
++ return pcd;
++}
++
++/*
++ * pl110fb_activate_var():
++ * Configures LCD Controller based on entries in var parameter. Settings are
++ * only written to the controller if changes were made.
++ */
++static int
++pl110fb_activate_var(struct fb_var_screeninfo *var, struct pl110fb_info *fbi)
++{
++ struct pl110fb_lcd_reg new_regs;
++ u_int half_screen_size, yres, pcd = get_pcd( var->pixclock);
++ u_long flags;
++ lcdRegs_t *LCD = (lcdRegs_t *)IO_ADDRESS(LCD_PHYS);
++ lcdicpRegs_t *LCDICP = (lcdicpRegs_t *)IO_ADDRESS(LCDICP_PHYS);
++
++ DPRINTK("Configuring pl110 LCD\n");
++ DPRINTK( "LCD=%p LCDICP=%p\n", LCD, LCDICP);
++
++ DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
++ var->xres, var->hsync_len,
++ var->left_margin, var->right_margin);
++ DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
++ var->yres, var->vsync_len,
++ var->upper_margin, var->lower_margin);
++
++#if DEBUG_VAR
++ if (var->xres < 16 || var->xres > 1024)
++ printk(KERN_ERR "%s: invalid xres %d\n",
++ fbi->fb.fix.id, var->xres);
++ if (var->hsync_len < 1 || var->hsync_len > 64)
++ printk(KERN_ERR "%s: invalid hsync_len %d\n",
++ fbi->fb.fix.id, var->hsync_len);
++ if (var->left_margin < 1 || var->left_margin > 255)
++ printk(KERN_ERR "%s: invalid left_margin %d\n",
++ fbi->fb.fix.id, var->left_margin);
++ if (var->right_margin < 1 || var->right_margin > 255)
++ printk(KERN_ERR "%s: invalid right_margin %d\n",
++ fbi->fb.fix.id, var->right_margin);
++ if (var->yres < 1 || var->yres > 1024)
++ printk(KERN_ERR "%s: invalid yres %d\n",
++ fbi->fb.fix.id, var->yres);
++ if (var->vsync_len < 1 || var->vsync_len > 64)
++ printk(KERN_ERR "%s: invalid vsync_len %d\n",
++ fbi->fb.fix.id, var->vsync_len);
++ if (var->upper_margin < 0 || var->upper_margin > 255)
++ printk(KERN_ERR "%s: invalid upper_margin %d\n",
++ fbi->fb.fix.id, var->upper_margin);
++ if (var->lower_margin < 0 || var->lower_margin > 255)
++ printk(KERN_ERR "%s: invalid lower_margin %d\n",
++ fbi->fb.fix.id, var->lower_margin);
++#endif
++ if( var->bits_per_pixel == 8) {
++ new_regs.LCDcontrol = LCD_CTRL_BPP8;
++ } else if( var->bits_per_pixel == 16) {
++ new_regs.LCDcontrol = LCD_CTRL_BPP16 | LCD_CTRL_BGR;
++ }
++
++ new_regs.LCDcontrol |= fbi->LCDcontrol | LCD_CTRL_ENABLE;
++
++ new_regs.LCDtiming0 =
++ LCD_TIMING0_HFP(var->right_margin) +
++ LCD_TIMING0_HBP(var->left_margin) +
++ LCD_TIMING0_HSW(var->hsync_len) +
++ LCD_TIMING0_PPL(var->xres);
++
++ /*
++ * If we have a dual scan LCD, then we need to halve
++ * the YRES parameter.
++ */
++ yres = var->yres;
++ if( fbi->LCDcontrol & LCD_CTRL_DUAL)
++ yres /= 2;
++
++ new_regs.LCDtiming1 =
++ LCD_TIMING1_VBP(var->upper_margin) +
++ LCD_TIMING1_VFP(var->lower_margin) +
++ LCD_TIMING1_VSW(var->vsync_len) +
++ LCD_TIMING1_LPP(yres);
++
++ new_regs.LCDtiming2 = fbi->LCDtiming2 |
++ LCD_TIMING2_CPL (480) | //(var->xres) |
++ LCD_TIMING2_PCD(pcd) |
++ (var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : LCD_TIMING2_IHS) |
++ (var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : LCD_TIMING2_IVS);
++
++ new_regs.LCDtiming3 = fbi->LCDtiming3;
++ new_regs.LCDICPsetup = fbi->LCDICPsetup | LCDICP_SETUP_PPL(var->xres);
++#if defined(CONFIG_ARCH_LH7A400)
++ new_regs.LCDICPsetup |= LCDICP_SETUP_POWER;
++#endif
++
++ new_regs.LCDICPcontrol = fbi->LCDICPcontrol;
++ new_regs.LCDICPtiming1 = fbi->LCDICPtiming1;
++ new_regs.LCDICPtiming2 = fbi->LCDICPtiming2;
++
++ DPRINTK("new LCDtiming0 = 0x%08x\n", (u32)new_regs.LCDtiming0);
++ DPRINTK("new LCDtiming1 = 0x%08x\n", (u32)new_regs.LCDtiming1);
++ DPRINTK("new LCDtiming2 = 0x%08x\n", (u32)new_regs.LCDtiming2);
++ DPRINTK("new LCDtiming3 = 0x%08x\n", (u32)new_regs.LCDtiming3);
++ DPRINTK("new LCDcontrol = 0x%08x\n", (u32)new_regs.LCDcontrol);
++ DPRINTK("new LCDICPsetup = 0x%08x\n", (u32)new_regs.LCDICPsetup);
++ DPRINTK("new LCDICPcontrol = 0x%08x\n", (u32)new_regs.LCDICPcontrol);
++ DPRINTK("new LCDICPtiming1 = 0x%08x\n", (u32)new_regs.LCDICPtiming1);
++ DPRINTK("new LCDICPtiming2 = 0x%08x\n", (u32)new_regs.LCDICPtiming2);
++
++
++ /* Update shadow copy atomically */
++ local_irq_save(flags);
++ fbi->upbase = fbi->screen_dma;
++
++ fbi->reg_LCDtiming0 = new_regs.LCDtiming0;
++ fbi->reg_LCDtiming1 = new_regs.LCDtiming1;
++ fbi->reg_LCDtiming2 = new_regs.LCDtiming2;
++ fbi->reg_LCDtiming3 = new_regs.LCDtiming3;
++ fbi->reg_LCDcontrol = new_regs.LCDcontrol;
++ fbi->reg_LCDICPsetup = new_regs.LCDICPsetup;
++ fbi->reg_LCDICPcontrol = new_regs.LCDICPcontrol;
++ fbi->reg_LCDICPtiming1 = new_regs.LCDICPtiming1;
++ fbi->reg_LCDICPtiming2 = new_regs.LCDICPtiming2;
++ local_irq_restore(flags);
++
++ /*
++ * Only update the registers if the controller is enabled
++ * and something has changed.
++ */
++ if ((LCD->timing0 != fbi->reg_LCDtiming0) || (LCD->timing1 != fbi->reg_LCDtiming1) ||
++ (LCD->timing2 != fbi->reg_LCDtiming2) || (LCD->timing3 != fbi->reg_LCDtiming2) ||
++ (LCD->control != fbi->reg_LCDcontrol) || (LCDICP->setup != fbi->reg_LCDICPsetup) ||
++ (LCDICP->timing1 != fbi->reg_LCDICPtiming1) || (LCDICP->timing2 != fbi->reg_LCDICPtiming2) ||
++ (LCD->upbase != fbi->upbase) || (LCD->lpbase != fbi->lpbase))
++ pl110fb_schedule_task(fbi, C_REENABLE);
++
++ return 0;
++}
++
++/*
++ * NOTE! The following functions are purely helpers for set_ctrlr_state.
++ * Do not call them directly; set_ctrlr_state does the correct serialisation
++ * to ensure that things happen in the right way 100% of time time.
++ * -- rmk
++ */
++
++static void
++pl110fb_backlight_on(struct pl110fb_info *fbi)
++{
++ DPRINTK("backlight on\n");
++
++#ifdef CONFIG_ARCH_LH79520
++ if( machine_is_lh79520evb()) {
++ //cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ GPOUT16 |= BACKLIGHT;
++
++ //cpld->lcd_pwr_cntl |= CPLD_BACKLIGHT_ON;
++ }
++#endif
++
++#ifdef CONFIG_ARCH_LH7A400
++ if( machine_is_lh7a400evb()) {
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++ cpld->lcd_pwr_cntl |= CPLD_BACKLIGHT_ON;
++ }
++#endif
++}
++
++static void
++pl110fb_backlight_off(struct pl110fb_info *fbi)
++{
++ DPRINTK("backlight off\n");
++
++#ifdef CONFIG_ARCH_LH79520
++ if( machine_is_lh79520evb()) {
++ //cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ GPOUT16 &= ~BACKLIGHT;
++ //cpld->lcd_pwr_cntl &= ~CPLD_BACKLIGHT_ON;
++ }
++#endif
++#ifdef CONFIG_ARCH_LH7A400
++ if( machine_is_lh7a400evb()) {
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++ cpld->lcd_pwr_cntl &= ~CPLD_BACKLIGHT_ON;
++ }
++#endif
++}
++
++static void
++pl110fb_power_up_lcd(struct pl110fb_info *fbi)
++{
++ DPRINTK("LCD power on\n");
++
++#ifdef CONFIG_ARCH_LH79520
++ if( machine_is_lh79520evb()) {
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++ cpld->lcd_pwr_cntl |= CPLD_LCDP_EN;
++ }
++#endif
++#ifdef CONFIG_ARCH_LH7A400
++ if( machine_is_lh7a400evb()) {
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++ cpld->lcd_pwr_cntl |= CPLD_LCDP_EN;
++ }
++#endif
++}
++
++static void
++pl110fb_power_down_lcd(struct pl110fb_info *fbi)
++{
++ DPRINTK("LCD power off\n");
++#ifdef CONFIG_ARCH_LH79520
++ if( machine_is_lh79520evb()) {
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++ cpld->lcd_pwr_cntl &= ~CPLD_LCDP_EN;
++ }
++#endif
++#ifdef CONFIG_ARCH_LH7A400
++ if( machine_is_lh7a400evb()) {
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++
++ cpld->lcd_pwr_cntl &= ~CPLD_LCDP_EN;
++ }
++#endif
++}
++
++
++static void
++pl110fb_setup_hw(struct pl110fb_info *fbi)
++{
++#ifdef CONFIG_ARCH_LH79520
++ rcpcRegs_t *rcpc = (rcpcRegs_t *)IO_ADDRESS( RCPC_PHYS);
++ ioconRegs_t *iocon = (ioconRegs_t *)IO_ADDRESS( IOCON_PHYS);
++
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED; /* unlock RCPC registers */
++ barrier();
++
++ /*
++ * use HCLK for the LCD clock.
++ */
++ rcpc->spareClkCtrl &= ~RCPC_SPARE_CLKCTRL_LCDCLK_DISABLE; /* enable LCDCLK */
++ rcpc->spareClkSel &= ~RCPC_SCLKSEL_LCDCLK; /* LCDCLK from HCLK */
++ rcpc->spare0Prescale &= 0;
++ rcpc->AHBClkCtrl &= ~RCPC_CLKCTRL_DMAC_DISABLE; /* ensure DMA gets a clock */
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED; /* lock RCPC registers */
++
++ /* set the pin mux to enable all required LCD signals and disable the rest */
++
++ iocon->LCDMux =
++ LCDMUX_CLVDDEN
++// | LCDMUX_CLXCLK
++// | LCDMUX_CLSPL /* SPL */
++// | LCDMUX_CLS /* CLS */
++ | LCDMUX_PIOC2 /* don't need external LCD clock */
++ | LCDMUX_CLCP /* DCLK */
++ | LCDMUX_CLLP /* LP */
++ | LCDMUX_CLD17
++ | LCDMUX_CLD16
++ | LCDMUX_CLD15
++ | LCDMUX_CLD14
++ | LCDMUX_CLD13
++ | LCDMUX_CLD12
++ | LCDMUX_CLFP
++ | LCDMUX_CLD11
++ | LCDMUX_CLD10
++ | LCDMUX_CLD8
++ | LCDMUX_CLD9
++ | LCDMUX_CLD2 /* red[1] */
++ | LCDMUX_CLD3 /* red[2] */
++ | LCDMUX_CLD4 /* red[3] */
++ | LCDMUX_CLD5 /* red[4] */
++ | LCDMUX_CLD7 /* green[0] */
++ | LCDMUX_CLD6; /* green[1] */
++
++// iocon->LCDMux = LCDMUX_CLREV
++// | LCDMUX_CLXCLK
++// | LCDMUX_CLD13 /* blue[0] */
++// | LCDMUX_CLD14 /* blue[1] */
++// | LCDMUX_CLD15 /* blue[2] */
++// | LCDMUX_CLD16 /* blue[3] */
++// | LCDMUX_CLD17 /* blue[4] */
++// | LCDMUX_CLSPL /* SPL */
++// | LCDMUX_CLS /* CLS */
++// | LCDMUX_PIOC2 /* don't need external LCD clock */
++// | LCDMUX_CLCP /* DCLK */
++// | LCDMUX_CLP /* LP */
++// | LCDMUX_CLSPS /* SPS */
++// | LCDMUX_CLD2 /* red[1] */
++// | LCDMUX_CLD3 /* red[2] */
++// | LCDMUX_CLD4 /* red[3] */
++// | LCDMUX_CLD5 /* red[4] */
++// | LCDMUX_CPS /* PS */
++// | LCDMUX_CLD7 /* green[0] */
++// | LCDMUX_CLD8 /* green[1] */
++// | LCDMUX_CLD9 /* green[2] */
++// | LCDMUX_CLD10 /* green[3] */
++// | LCDMUX_CLD11; /* green[4] */
++
++ DPRINTK( "IOCON->LCDMux=%x\n", iocon->LCDMux);
++#endif
++#ifdef CONFIG_ARCH_LH7A400
++ gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
++
++ gpio->pinmux |= (GPIO_PINMUX_PEOCON | GPIO_PINMUX_PDOCON); /* route LCD data bits */
++
++ DPRINTK( "gpio: pinmux=%x pdddr=0x%x peddr=0x%x\n",
++ gpio->pinmux, gpio->pdddr, gpio->peddr); // DDD
++#endif
++}
++
++static void
++pl110fb_enable_controller(struct pl110fb_info *fbi)
++{
++ lcdRegs_t *LCD = (lcdRegs_t *)IO_ADDRESS(LCD_PHYS);
++ lcdicpRegs_t *LCDICP = (lcdicpRegs_t *)IO_ADDRESS(LCDICP_PHYS);
++
++#if defined(CONFIG_ARCH_LH79520) || defined(CONFIG_ARCH_LH7A400)
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++#endif
++ DPRINTK("Enabling LCD controller\n");
++
++ LCDICP->control = fbi->reg_LCDICPcontrol;
++ LCDICP->setup = fbi->reg_LCDICPsetup;
++ LCDICP->timing1 = fbi->reg_LCDICPtiming1;
++ LCDICP->timing2 = fbi->reg_LCDICPtiming2;
++ LCD->timing0 = fbi->reg_LCDtiming0;
++ LCD->timing1 = fbi->reg_LCDtiming1;
++ LCD->timing2 = fbi->reg_LCDtiming2;
++ LCD->timing3 = fbi->reg_LCDtiming3;
++ LCD->upbase = fbi->upbase;
++#if defined(CONFIG_ARCH_LH7A400)
++ LCD->lpoverflow = fbi->upbase;
++#endif
++ LCD->intrEnable = 0;
++ LCD->control = fbi->reg_LCDcontrol;
++
++ /*
++ * enable lcd output
++ */
++#if defined(CONFIG_ARCH_LH79520) || defined(CONFIG_ARCH_LH7A400)
++ cpld->lcd_pwr_cntl |= CPLD_LCD_OE;
++#endif
++
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_timeout(20 * HZ / 1000);
++
++ LCD->control |= LCD_CTRL_PWR;
++
++
++#if defined(CONFIG_ARCH_LH7A400)
++ DPRINTK("real LCDoverflow = %p\n", (void *)LCD->lpoverflow);
++#endif
++ DPRINTK("real LCDupbase = %p\n", (void *)LCD->upbase);
++ DPRINTK("real LCDlpbase = %p\n", (void *)LCD->lpbase);
++ DPRINTK("real LCDtiming0 = 0x%08x\n", LCD->timing0);
++ DPRINTK("real LCDtiming1 = 0x%08x\n", LCD->timing1);
++ DPRINTK("real LCDtiming2 = 0x%08x\n", LCD->timing2);
++ DPRINTK("real LCDtiming3 = 0x%08x\n", LCD->timing3);
++ DPRINTK("real LCDcontrol = 0x%08x\n", LCD->control);
++ DPRINTK("real LCDICPsetup = 0x%08x\n", LCDICP->setup);
++ DPRINTK("real LCDICPcontrol = 0x%08x\n", LCDICP->control);
++ DPRINTK("real LCDICPtiming1 = 0x%08x\n", LCDICP->timing1);
++ DPRINTK("real LCDICPtiming2 = 0x%08x\n", LCDICP->timing2);
++}
++
++
++static void
++pl110fb_disable_controller(struct pl110fb_info *fbi)
++{
++ lcdRegs_t *LCD = (lcdRegs_t *)IO_ADDRESS(LCD_PHYS);
++ lcdicpRegs_t *LCDICP = (lcdicpRegs_t *)IO_ADDRESS(LCDICP_PHYS);
++
++#if defined(CONFIG_ARCH_LH79520) || defined(CONFIG_ARCH_LH7A400)
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++#endif
++
++ DECLARE_WAITQUEUE(wait, current);
++
++ DPRINTK("Disabling LCD controller\n");
++
++ add_wait_queue(&fbi->ctrlr_wait, &wait);
++ set_current_state(TASK_UNINTERRUPTIBLE);
++
++ LCD->intrEnable |= LCD_STATUS_VCOMP; /* allow VCOMP interrupts */
++
++ /* turn off LCD power, wait a bit, then disable the controller */
++ LCD->control &= ~LCD_CTRL_PWR;
++
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_timeout(20 * HZ / 1000);
++
++ LCD->control = 0;
++ LCDICP->control = 0;
++
++#if defined(CONFIG_ARCH_LH79520) || defined(CONFIG_ARCH_LH7A400)
++ cpld->lcd_pwr_cntl &= ~CPLD_LCD_OE;
++#endif
++
++ schedule_timeout(20 * HZ / 1000);
++ current->state = TASK_RUNNING;
++ remove_wait_queue(&fbi->ctrlr_wait, &wait);
++}
++
++
++/*
++ * pl110fb_handle_irq: Handle 'LCD DONE' interrupts.
++ */
++static void
++pl110fb_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
++{
++ struct pl110fb_info *fbi = dev_id;
++ lcdRegs_t *LCD = (lcdRegs_t *)IO_ADDRESS(LCD_PHYS);
++
++ unsigned int intr = LCD->maskedIntrStatus;
++
++ DPRINTK("IRQ: status=0x%x\n", intr);
++
++ if( intr & LCD_STATUS_VCOMP) { /* vertical compare interrupt */
++ LCD->intrEnable = 0; /* only want one interrupt */
++ wake_up(&fbi->ctrlr_wait);
++ }
++
++ LCD->rawIntrStatus = 0; /* clear interrupt */
++}
++
++/*
++ * This function must be called from task context only, since it will
++ * sleep when disabling the LCD controller, or if we get two contending
++ * processes trying to alter state.
++ */
++static void
++set_ctrlr_state(struct pl110fb_info *fbi, u_int state)
++{
++ u_int old_state;
++
++ down(&fbi->ctrlr_sem);
++
++ old_state = fbi->state;
++
++ switch (state) {
++ case C_DISABLE_CLKCHANGE:
++ /*
++ * Disable controller for clock change. If the
++ * controller is already disabled, then do nothing.
++ */
++ if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
++ fbi->state = state;
++ pl110fb_disable_controller(fbi);
++ }
++ break;
++
++ case C_DISABLE_PM:
++ case C_DISABLE:
++ /*
++ * Disable controller
++ */
++ if (old_state != C_DISABLE) {
++ fbi->state = state;
++
++ pl110fb_backlight_off(fbi);
++ if (old_state != C_DISABLE_CLKCHANGE)
++ pl110fb_disable_controller(fbi);
++ pl110fb_power_down_lcd(fbi);
++ }
++ break;
++
++ case C_ENABLE_CLKCHANGE:
++ /*
++ * Enable the controller after clock change. Only
++ * do this if we were disabled for the clock change.
++ */
++ if (old_state == C_DISABLE_CLKCHANGE) {
++ fbi->state = C_ENABLE;
++ pl110fb_enable_controller(fbi);
++ }
++ break;
++
++ case C_REENABLE:
++ /*
++ * Re-enable the controller only if it was already
++ * enabled. This is so we reprogram the control
++ * registers.
++ */
++ if (old_state == C_ENABLE) {
++ pl110fb_disable_controller(fbi);
++ pl110fb_setup_hw(fbi);
++ pl110fb_enable_controller(fbi);
++ }
++ break;
++
++ case C_ENABLE_PM:
++ /*
++ * Re-enable the controller after PM. This is not
++ * perfect - think about the case where we were doing
++ * a clock change, and we suspended half-way through.
++ */
++ if (old_state != C_DISABLE_PM)
++ break;
++ /* fall through */
++
++ case C_ENABLE:
++ /*
++ * Power up the LCD screen, enable controller, and
++ * turn on the backlight.
++ */
++ if (old_state != C_ENABLE) {
++ fbi->state = C_ENABLE;
++ pl110fb_setup_hw(fbi);
++ pl110fb_power_up_lcd(fbi);
++ pl110fb_enable_controller(fbi);
++ pl110fb_backlight_on(fbi);
++ }
++ break;
++ }
++ up(&fbi->ctrlr_sem);
++}
++
++
++/*
++ * Our LCD controller task (which is called when we blank or unblank)
++ * via keventd.
++ */
++static void
++pl110fb_task(void *dummy)
++{
++ struct pl110fb_info *fbi = dummy;
++ u_int state = xchg(&fbi->task_state, -1);
++
++ set_ctrlr_state(fbi, state);
++}
++
++#ifdef CONFIG_CPU_FREQ
++/*
++ * Calculate the minimum DMA period over all displays that we own.
++ * This, together with the SDRAM bandwidth defines the slowest CPU
++ * frequency that can be selected.
++ */
++static unsigned int
++pl110fb_min_dma_period(struct pl110fb_info *fbi)
++{
++ unsigned int min_period = (unsigned int)-1;
++ int i;
++
++ for (i = 0; i < MAX_NR_CONSOLES; i++) {
++ unsigned int period;
++
++ /*
++ * Do we own this display?
++ */
++ if (fb_display[i].fb_info != &fbi->fb)
++ continue;
++
++ /*
++ * Ok, calculate its DMA period
++ */
++ period = pl110fb_display_dma_period(get_con_var(&fbi->fb, i));
++ if (period < min_period)
++ min_period = period;
++ }
++
++ return min_period;
++}
++
++/*
++ * CPU clock speed change handler. We need to adjust the LCD timing
++ * parameters when the CPU clock is adjusted by the power management
++ * subsystem.
++ */
++static int
++pl110fb_clkchg_notifier(struct notifier_block *nb, unsigned long val,
++ void *data)
++{
++ struct pl110fb_info *fbi = TO_INF(nb, clockchg);
++ struct cpufreq_minmax *mm = data;
++ u_int pcd;
++
++ switch (val) {
++ case CPUFREQ_MINMAX:
++ printk(KERN_DEBUG "min dma period: %d ps, old clock %d kHz, "
++ "new clock %d kHz\n", pl110fb_min_dma_period(fbi),
++ mm->cur_freq, mm->new_freq);
++ /* todo: fill in min/max values */
++ break;
++
++ case CPUFREQ_PRECHANGE:
++ set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
++ break;
++
++ case CPUFREQ_POSTCHANGE:
++ pcd = get_pcd(fbi->fb.var.pixclock);
++ fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); // DDD
++ set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
++ break;
++ }
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_PM
++/*
++ * Power management hook. Note that we won't be called from IRQ context,
++ * unlike the blank functions above, so we may sleep.
++ */
++static int
++pl110fb_pm_callback(struct pm_dev *pm_dev, pm_request_t req, void *data)
++{
++ struct pl110fb_info *fbi = pm_dev->data;
++
++ DPRINTK("pm_callback: %d\n", req);
++
++ if (req == PM_SUSPEND || req == PM_RESUME) {
++ int state = (int)data;
++
++ if (state == 0) {
++ /* Enter D0. */
++ set_ctrlr_state(fbi, C_ENABLE_PM);
++ } else {
++ /* Enter D1-D3. Disable the LCD controller. */
++ set_ctrlr_state(fbi, C_DISABLE_PM);
++ }
++ }
++ DPRINTK("done\n");
++ return 0;
++}
++#endif
++
++/*
++ * pl110fb_map_video_memory():
++ * Allocates the DRAM memory for the frame buffer. This buffer is
++ * remapped into a non-cached, non-buffered, memory region to
++ * allow palette and pixel writes to occur without flushing the
++ * cache. Once this area is remapped, all virtual memory
++ * access to the video memory should occur at the new region.
++ */
++static int __init
++pl110fb_map_video_memory(struct pl110fb_info *fbi)
++{
++ /*
++ * We reserve one page for the palette, plus the size
++ * of the framebuffer.
++ */
++ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len);
++ fbi->map_cpu = consistent_alloc(GFP_KERNEL, fbi->map_size,
++ &fbi->map_dma);
++
++ if (fbi->map_cpu) {
++ fbi->screen_cpu = fbi->map_cpu;
++ fbi->screen_dma = fbi->map_dma;
++ fbi->fb.fix.smem_start = fbi->screen_dma;
++ }
++
++ DPRINTK( "fix.smem_len = %d map_cpu = 0x%x screen_cpu = 0x%x screen_dma = 0x%x\n",
++ fbi->fb.fix.smem_len, fbi->map_cpu, fbi->screen_cpu, fbi->screen_dma);
++
++ return fbi->map_cpu ? 0 : -ENOMEM;
++}
++
++/* Fake monspecs to fill in fbinfo structure */
++static struct fb_monspecs monspecs __initdata = {
++ 30000, 70000, 50, 65, 0 /* Generic */
++};
++
++
++static struct pl110fb_info * __init
++pl110fb_init_fbinfo(void)
++{
++ struct pl110fb_mach_info *inf;
++ struct pl110fb_info *fbi;
++ int pixelsPerSecond;
++
++ fbi = kmalloc(sizeof(struct pl110fb_info) + sizeof(struct display) +
++ sizeof(u16) * 16, GFP_KERNEL);
++ if (!fbi)
++ return NULL;
++
++ memset(fbi, 0, sizeof(struct pl110fb_info) + sizeof(struct display));
++
++ fbi->currcon = -1;
++
++ strcpy(fbi->fb.fix.id, PL110_NAME);
++
++ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
++ fbi->fb.fix.type_aux = 0;
++ fbi->fb.fix.xpanstep = 0;
++ fbi->fb.fix.ypanstep = 0;
++ fbi->fb.fix.ywrapstep = 0;
++ fbi->fb.fix.accel = FB_ACCEL_NONE;
++
++ fbi->fb.var.nonstd = 0;
++ fbi->fb.var.activate = FB_ACTIVATE_NOW;
++ fbi->fb.var.height = -1;
++ fbi->fb.var.width = -1;
++ fbi->fb.var.accel_flags = 0;
++ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED;
++
++ strcpy(fbi->fb.modename, PL110_NAME);
++ strcpy(fbi->fb.fontname, "Acorn8x8");
++
++ fbi->fb.fbops = &pl110fb_ops;
++ fbi->fb.changevar = NULL;
++ fbi->fb.switch_con = pl110fb_switch;
++ fbi->fb.updatevar = pl110fb_updatevar;
++ fbi->fb.blank = pl110fb_blank;
++ fbi->fb.flags = FBINFO_FLAG_DEFAULT;
++ fbi->fb.node = -1;
++ fbi->fb.monspecs = monspecs;
++ fbi->fb.disp = (struct display *)(fbi + 1);
++ fbi->fb.pseudo_palette = (void *)(fbi->fb.disp + 1);
++
++ fbi->rgb[RGB_8] = &rgb_8;
++ fbi->rgb[RGB_16] = &def_rgb_16;
++
++ inf = pl110fb_get_machine_info(fbi);
++
++ /*
++ * Calculate pixclock. pixclock is the time in picoseconds spent
++ * drawing a pixel. The time (in seconds) to draw a pixel is
++ * the inverse of how many pixels we draw in a second (pixelsPerSecond).
++ *
++ * pixelsPerSecond is xres*yres*refresh, plus all the overhead time
++ * (horizontal and vertical front and back porches, plus horizontal
++ * and vertical sync lengths).
++ *
++ *
++ */
++ pixelsPerSecond =
++ (inf->xres + inf->hsync_len + inf->left_margin + inf->right_margin) *
++ (inf->yres + inf->vsync_len + inf->upper_margin + inf->lower_margin) *
++ VERTICAL_REFRESH;
++
++ inf->pixclock = 1000000000 / (pixelsPerSecond / 1000);
++
++ DPRINTK( "pixelsPerSecond=%d pixclock=%d\n", pixelsPerSecond, inf->pixclock);
++
++
++ fbi->max_xres = inf->xres;
++ fbi->fb.var.xres = inf->xres;
++ fbi->fb.var.xres_virtual = inf->xres;
++ fbi->max_yres = inf->yres;
++ fbi->fb.var.yres = inf->yres;
++ fbi->fb.var.yres_virtual = inf->yres;
++ fbi->max_bpp = inf->bpp;
++ fbi->fb.var.bits_per_pixel = inf->bpp;
++ fbi->fb.var.pixclock = inf->pixclock;
++ fbi->fb.var.hsync_len = inf->hsync_len;
++ fbi->fb.var.left_margin = inf->left_margin;
++ fbi->fb.var.right_margin = inf->right_margin;
++ fbi->fb.var.vsync_len = inf->vsync_len;
++ fbi->fb.var.upper_margin = inf->upper_margin;
++ fbi->fb.var.lower_margin = inf->lower_margin;
++ fbi->fb.var.sync = inf->sync;
++ fbi->fb.var.grayscale = inf->cmap_greyscale;
++ fbi->cmap_inverse = inf->cmap_inverse;
++ fbi->cmap_static = inf->cmap_static;
++ fbi->LCDtiming2 = inf->LCDtiming2;
++ fbi->LCDtiming3 = inf->LCDtiming3;
++ fbi->LCDcontrol = inf->LCDcontrol;
++ fbi->LCDICPsetup = inf->LCDICPsetup;
++ fbi->LCDICPcontrol = inf->LCDICPcontrol;
++ fbi->LCDICPtiming1 = inf->LCDICPtiming1;
++ fbi->LCDICPtiming2 = inf->LCDICPtiming2;
++ fbi->state = C_DISABLE;
++ fbi->task_state = (u_char)-1;
++ fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres *
++ fbi->max_bpp / 8;
++
++ init_waitqueue_head(&fbi->ctrlr_wait);
++ INIT_TQUEUE(&fbi->task, pl110fb_task, fbi);
++ init_MUTEX(&fbi->ctrlr_sem);
++
++ return fbi;
++}
++
++int __init
++pl110fb_init(void)
++{
++ struct pl110fb_info *fbi;
++ int ret;
++
++ DPRINTK( "\n\npl110fb_init\n");
++
++ DPRINTK( "cpu clock = %d HCLK = %d\n", cpufreq_get(0), hclkfreq_get());
++
++ fbi = pl110fb_init_fbinfo();
++ ret = -ENOMEM;
++ if (!fbi)
++ goto failed;
++
++ /* Initialize video memory */
++ ret = pl110fb_map_video_memory(fbi);
++ if (ret)
++ goto failed;
++
++ ret = request_irq(IRQ_LCD, pl110fb_handle_irq, SA_INTERRUPT,
++ fbi->fb.fix.id, fbi);
++ if (ret) {
++ printk(KERN_ERR "pl110fb: request_irq failed: ret=%d\n", ret);
++ goto failed;
++ }
++
++ pl110fb_set_var(&fbi->fb.var, -1, &fbi->fb);
++
++ ret = register_framebuffer(&fbi->fb);
++ if (ret < 0)
++ goto failed;
++
++#ifdef CONFIG_PM
++ /*
++ * Note that the console registers this as well, but we want to
++ * power down the display prior to sleeping.
++ */
++ fbi->pm = pm_register(PM_SYS_DEV, PM_SYS_VGA, pl110fb_pm_callback);
++ if (fbi->pm)
++ fbi->pm->data = fbi;
++#endif
++#ifdef CONFIG_CPU_FREQ
++ fbi->clockchg.notifier_call = pl110fb_clkchg_notifier;
++ cpufreq_register_notifier(&fbi->clockchg);
++#endif
++
++ /*
++ * Ok, now enable the LCD controller
++ */
++ set_ctrlr_state(fbi, C_ENABLE);
++
++ /* This driver cannot be unloaded at the moment */
++ MOD_INC_USE_COUNT;
++
++ return 0;
++
++failed:
++ if (fbi)
++ kfree(fbi);
++ return ret;
++}
++
++int __init
++pl110fb_setup(char *options)
++{
++ return 0;
++}
++
++MODULE_DESCRIPTION("ARM PL110 framebuffer driver");
++MODULE_LICENSE("GPL");
++
+diff -urN linux-2.4.26/drivers/video/pl110fb.h linux-2.4.26-vrs1-lnode80/drivers/video/pl110fb.h
+--- linux-2.4.26/drivers/video/pl110fb.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/drivers/video/pl110fb.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,350 @@
++/*
++ * linux/drivers/video/pl110fb.h
++ * -- ARM PrimeCell PL110 LCD controller frame buffer device
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * Portions Copyright (C) 2001 Sharp Microelectronics of the Americas, Inc.
++ * CAMAS, WA
++ *
++ * based in part on sa1100fb.h, which is Copyright (C) Eric A. Thomas
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive
++ * for more details.
++ */
++
++/*
++ * Color LCD Controller registers
++ */
++typedef struct {
++ volatile u32 timing0; /* Horizontal axis panel control */
++ volatile u32 timing1; /* Vertical axis panel control */
++ volatile u32 timing2; /* clock and signal polarity control */
++ volatile u32 timing3; /* line end control */
++ volatile dma_addr_t upbase; /* upper panel frame base address */
++ volatile dma_addr_t lpbase; /* lower panel frame base address */
++ volatile u32 intrEnable; /* interrupt enable mask */
++ volatile u32 control; /* LCD panel pixel parameters */
++ volatile u32 rawIntrStatus; /* raw interrupt status */
++ volatile u32 maskedIntrStatus; /* masked interrupt status */
++ volatile dma_addr_t upcurr; /* upper panel current address */
++ volatile dma_addr_t lpcurr; /* lower panel current address */
++ volatile dma_addr_t lpoverflow; /* SDRAM fb base */
++ volatile u32 reservedcc[115]; /* reserved */
++ volatile u32 palette[128]; /* 256 x 16-bit color palette */
++} lcdRegs_t;
++
++
++/*
++ * LCDTiming0 Register Bit Field constants
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than zero.
++ */
++#define LCD_TIMING0_HBP(n) _SBF(24,((n)-1)) /* Horiz Back Porch */
++#define LCD_TIMING0_HFP(n) _SBF(16,((n)-1)) /* Horiz Front Porch */
++#define LCD_TIMING0_HSW(n) _SBF(8,((n)-1)) /* Horiz sync Pulse Width */
++#define LCD_TIMING0_PPL(n) _SBF(2,((((n)/16)-1)&0x3F)) /* Pixels per line */
++
++/*
++ * LCDTiming1 Register Bit Field constants
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than zero.
++ */
++#define LCD_TIMING1_VBP(n) _SBF(24,(n)) /* Vertical Back Porch */
++#define LCD_TIMING1_VFP(n) _SBF(16,(n)) /* Vertical Front Porch */
++#define LCD_TIMING1_VSW(n) _SBF(10,(n)) /* Vertical Synchronization Pulse */
++#define LCD_TIMING1_LPP(n) _SBF(0,((n)-1)) /* Lines per Panel */
++
++/*
++ * LCDTiming2 Register Bit Field constants
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than two.
++ */
++#define LCD_TIMING2_BCD _BIT(26) /* Bypass Pixel Clock Divider */
++#define LCD_TIMING2_CPL(n) _SBF(16,((n)-1)&0x3FF) /* Clocks Per Line */
++#define LCD_TIMING2_IOE _BIT(14) /* Invert Output Enable */
++#define LCD_TIMING2_IPC _BIT(13) /* Invert Panel Clock */
++#define LCD_TIMING2_IHS _BIT(12) /* Invert Horizontal Synchronization */
++ /* set == HSYNC is active low */
++#define LCD_TIMING2_IVS _BIT(11) /* Invert Vertical Synchronization */
++ /* set == VSYNC is active low */
++#define LCD_TIMING2_ACB(n) _SBF(6,((n)-1)) /* AC Bias Pin Frequency */
++#define LCD_TIMING2_CLKSEL _BIT(5) /* Clock Selector */
++#define LCD_TIMING2_PCD(n) _SBF(0,((n)-2)) /* Panel Clock Divisor */
++
++
++/*
++ * LCDTiming3 Register Bit Field constants
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than one.
++ */
++#define LCD_TIMING3_LEE _BIT(16) /* Line End Enable */
++#define LCD_TIMING3_LED(n) _SBF(0,((n)-1)) /* Line End Signal Delay */
++
++
++/*
++ * intrEnable, rawIntrStatus, maskedIntrStatus bit field positions
++ */
++#define LCD_STATUS_MBERROR _BIT(4) /* Master Bus Error */
++#define LCD_STATUS_VCOMP _BIT(3) /* Vertical Compare */
++#define LCD_STATUS_LNBU _BIT(2) /* LCD Next addr. Base Update*/
++#define LCD_STATUS_FUF _BIT(1) /* FIFO underflow */
++
++
++/*
++ * Control Register Bit Field constants
++ */
++#define LCD_CTRL_WATERMARK _BIT(16) /* LCD DMA FIFO Watermark Level */
++#define LCD_CTRL_LDMAFIFOTME _BIT(15) /* LCD DMA FIFO Test Mode Enable */
++
++#define LCD_CTRL_VCOMP(n) _SBF(12,((n)&0x3)) /* Generate interrupt at: */
++#define LCD_CTRL_VCOMP_SVS _SBF(12,0) /* start of vertical sync */
++#define LCD_CTRL_VCOMP_SBP _SBF(12,1) /* start of back porch */
++#define LCD_CTRL_VCOMP_SAV _SBF(12,2) /* start of active video */
++#define LCD_CTRL_VCOMP_SFP _SBF(12,3) /* start of front porch */
++
++#define LCD_CTRL_PWR _BIT(11) /* LCD Power Enable */
++#define LCD_CTRL_BEPO _BIT(10) /* Big Endian Pixel Order */
++#define LCD_CTRL_BEBO _BIT(9) /* Big Endian Byte Order */
++#define LCD_CTRL_BGR _BIT(8) /* Swap Red and Blue (RGB to BGR) */
++#define LCD_CTRL_DUAL _BIT(7) /* Dual Panel STN */
++#define LCD_CTRL_MON8 _BIT(6) /* Monochrome LCD has 8-bit interface */
++#define LCD_CTRL_TFT _BIT(5) /* TFT LCD */
++
++#define LCD_CTRL_BW_COLOR _SBF(4,0) /* STN LCD is Color */
++#define LCD_CTRL_BW_MONO _SBF(4,1) /* STN LCD is Monochrome */
++
++#define LCD_CTRL_BPP1 _SBF(1,0) /* Bits per pixel */
++#define LCD_CTRL_BPP2 _SBF(1,1)
++#define LCD_CTRL_BPP4 _SBF(1,2)
++#define LCD_CTRL_BPP8 _SBF(1,3)
++#define LCD_CTRL_BPP16 _SBF(1,4)
++#define LCD_CTRL_BPP24 _SBF(1,5)
++
++#define LCD_CTRL_ENABLE _BIT(0) /* LCD Controller Enable */
++
++
++
++typedef struct {
++ volatile u32 setup; /* Setup */
++ volatile u32 control; /* Control */
++ volatile u32 timing1; /* HR-TFT Timing 1 */
++ volatile u32 timing2; /* HR-TFT Timing 2 */
++} lcdicpRegs_t;
++
++
++
++/*
++ * LCDICP Setup Register Bit Fields
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than zero.
++ */
++#define LCDICP_SETUP_MODE_BYPASS _SBF(0,0)
++#define LCDICP_SETUP_MODE_HRTFT _SBF(0,1)
++#define LCDICP_SETUP_MODE_DMTN _SBF(0,2)
++#define LCDICP_SETUP_HORIZ_REVERSE _SBF(2,0)
++#define LCDICP_SETUP_HORIZ_NORMAL _SBF(2,1)
++#define LCDICP_SETUP_VERT_REVERSE _SBF(3,0)
++#define LCDICP_SETUP_VERT_NORMAL _SBF(3,1)
++/* Calculates bit field value from actual pixels per line */
++#define LCDICP_SETUP_PPL(n) _SBF(4,((n)-1))
++#define LCDICP_SETUP_POWER _BIT(13) /* lh7a400 only */
++
++
++/*
++ * LCDICP Control Register Bit Fields
++ */
++#define LCDICP_CONTROL_SPSEN _BIT(0)
++#define LCDICP_CONTROL_CLSEN _BIT(1)
++#define LCDICP_CONTROL_UBLEN _BIT(2)
++#define LCDICP_CONTROL_DISP _BIT(3)
++#define LCDICP_CONTROL_EN0 _BIT(4)
++#define LCDICP_CONTROL_EN1 _BIT(5)
++#define LCDICP_CONTROL_EN2 _BIT(6)
++#define LCDICP_CONTROL_EN3 _BIT(7)
++
++
++/*
++ * LCDICP Timing 1 Register Bit Fields
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than zero.
++ */
++#define LCDICP_TIMING1_LPDEL(n) _SBF(0,((n)-1)&0xF)
++#define LCDICP_TIMING1_REVDEL(n) _SBF(4,((n)-1)&0xF)
++#define LCDICP_TIMING1_PSDEL(n) _SBF(8,((n)-1)&0xF)
++#define LCDICP_TIMING1_CLSDEL(n) _SBF(8,((n)-1)&0xF)
++
++
++/*
++ * LCDICP Timing 2 Register Bit Fields
++ *
++ * NOTE: Ensure the argument to the following macros is greater
++ * than zero.
++ */
++#define LCDICP_TIMING2_PSDEL2(n) _SBF(0,((n)-1)&0x1FF)
++#define LCDICP_TIMING2_CLSDEL2(n) _SBF(0,((n)-1)&0x1FF)
++#define LCDICP_TIMING2_SPLVALUE(n) _SBF(9,((n)-1)&0x7F)
++
++
++/*
++ * These are the bitfields for each
++ * display depth that we support.
++ */
++struct pl110fb_rgb {
++ struct fb_bitfield red;
++ struct fb_bitfield green;
++ struct fb_bitfield blue;
++ struct fb_bitfield transp;
++};
++
++/*
++ * This structure describes the machine which we are running on.
++ */
++struct pl110fb_mach_info {
++ u_long pixclock;
++
++ u_short xres;
++ u_short yres;
++
++ u_char bpp;
++ u_char hsync_len; /* horiz sync pulse width */
++ u_char left_margin; /* horiz back porch */
++ u_char right_margin; /* horiz front porch */
++
++ u_char vsync_len; /* vertical sync pulse width */
++ u_char upper_margin; /* vertical back porch */
++ u_char lower_margin; /* vertical front porch */
++ u_char sync;
++
++ u_int cmap_greyscale:1,
++ cmap_inverse:1,
++ cmap_static:1,
++ unused:29;
++
++ u_long LCDtiming2;
++ u_long LCDtiming3;
++ u_long LCDcontrol;
++ u_long LCDICPsetup;
++ u_long LCDICPcontrol;
++ u_long LCDICPtiming1;
++ u_long LCDICPtiming2;
++};
++
++
++/* Shadows for LCD/LCDICP controller registers */
++struct pl110fb_lcd_reg {
++ u_long LCDtiming0;
++ u_long LCDtiming1;
++ u_long LCDtiming2;
++ u_long LCDtiming3;
++ u_long LCDcontrol;
++ u_long LCDICPsetup;
++ u_long LCDICPcontrol;
++ u_long LCDICPtiming1;
++ u_long LCDICPtiming2;
++};
++
++#define RGB_8 (0)
++#define RGB_16 (1)
++#define NR_RGB 2
++
++struct pl110fb_info {
++ struct fb_info fb;
++ signed int currcon;
++
++ struct pl110fb_rgb *rgb[NR_RGB];
++
++ u_int max_bpp;
++ u_int max_xres;
++ u_int max_yres;
++
++ /*
++ * These are the addresses we mapped
++ * the framebuffer memory region to.
++ */
++ dma_addr_t map_dma;
++ u_char * map_cpu;
++ u_int map_size;
++
++ u_char * screen_cpu;
++ dma_addr_t screen_dma;
++ u_int palette_size;
++
++ dma_addr_t upbase;
++ dma_addr_t lpbase;
++
++ u_long LCDtiming2;
++ u_long LCDtiming3;
++ u_long LCDcontrol;
++ u_long LCDICPsetup;
++ u_long LCDICPcontrol;
++ u_long LCDICPtiming1;
++ u_long LCDICPtiming2;
++
++ u_int cmap_inverse:1,
++ cmap_static:1,
++ unused:30;
++
++ u_long reg_LCDtiming0;
++ u_long reg_LCDtiming1;
++ u_long reg_LCDtiming2;
++ u_long reg_LCDtiming3;
++ u_long reg_LCDcontrol;
++ u_long reg_LCDICPsetup;
++ u_long reg_LCDICPcontrol;
++ u_long reg_LCDICPtiming1;
++ u_long reg_LCDICPtiming2;
++
++ volatile u_char state;
++ volatile u_char task_state;
++ struct semaphore ctrlr_sem;
++ wait_queue_head_t ctrlr_wait;
++ struct tq_struct task;
++
++#ifdef CONFIG_PM
++ struct pm_dev *pm;
++#endif
++#ifdef CONFIG_CPU_FREQ
++ struct notifier_block clockchg;
++#endif
++};
++
++#define __type_entry(ptr,type,member) ((type *)((char *)(ptr)-offsetof(type,member)))
++
++#define TO_INF(ptr,member) __type_entry(ptr,struct pl110fb_info,member)
++
++/*
++ * These are the actions for set_ctrlr_state
++ */
++#define C_DISABLE (0)
++#define C_ENABLE (1)
++#define C_DISABLE_CLKCHANGE (2)
++#define C_ENABLE_CLKCHANGE (3)
++#define C_REENABLE (4)
++#define C_DISABLE_PM (5)
++#define C_ENABLE_PM (6)
++
++#define PL110_NAME "PL110"
++
++/*
++ * Debug macros
++ */
++#if DEBUG
++# define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
++#else
++# define DPRINTK(fmt, args...)
++#endif
++
++/*
++ * Minimum X and Y resolutions
++ */
++#define MIN_XRES 64
++#define MIN_YRES 64
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/ads_784x.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/ads_784x.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/ads_784x.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/ads_784x.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,25 @@
++/* vi: set sw=4 ts=4 ai: */
++
++/*
++* linux/include/asm-arm/arch-lh79520/ads_784x.h
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* Provide ADS_784x (touchscreen) types & definitions for LH7x EVB boards
++*
++*/
++
++#ifndef _ADS_784X_h
++#define _ADS_784X_h
++
++#include <asm-arm/arch-lh79520/ssp_lh7x.h>
++
++/*********************************************************************
++* Global Function Declarations
++*********************************************************************/
++extern int ads_784x_register(sspContext_t *sspContext);
++extern int ads_784x_deregister(void);
++
++
++#endif /* _ADS_784X_h */
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/cpld.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/cpld.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/cpld.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/cpld.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,138 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/cpld.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef _LH79520_CPLD_H
++#define _LH79520_CPLD_H
++
++typedef __attribute((packed)) struct {
++ volatile u16 keys_status;
++ volatile u16 reserved1;
++ volatile u16 l3_reg;
++ volatile u16 reserved2;
++ volatile u16 lcd_pwr_cntl;
++ volatile u16 reserved3;
++ volatile u16 l3_mode;
++ volatile u16 reserved4;
++ volatile u16 gpi;
++ volatile u16 reserved5;
++ volatile u16 gpo;
++ volatile u16 reserved6;
++ volatile u16 adc_dac_left;
++ volatile u16 adc_dac_right;
++ volatile u16 audio_control;
++ volatile u16 reserved7;
++ volatile u16 display_dip_sw;
++ volatile u16 reserved8;
++ volatile u16 seven_seg;
++ volatile u16 reserved9;
++ volatile u16 misc_stat;
++ volatile u16 reserved10;
++ volatile u16 gpio_data_dir;
++ volatile u16 reserved11;
++ volatile u16 ssp_dev_sel;
++ volatile u16 reserved12;
++ volatile u16 ser_port1_rts;
++ volatile u16 reserved13;
++ volatile u16 cf_reset;
++ volatile u16 reserved14;
++ volatile u16 cpu_dip_sw;
++ volatile u16 reserved15;
++ volatile u16 intr_mask;
++ volatile u16 reserved16;
++ volatile u16 reserved17;
++ volatile u16 reserved18;
++ volatile u16 reserved19;
++ volatile u16 reserved20;
++ volatile u16 reserved21;
++ volatile u16 reserved22;
++ volatile u16 nio_reg_clk;
++ volatile u16 reserved23;
++} cpldRegs_t;
++
++
++/* LCD power bits */
++#define CPLD_EN26V _BIT(0) /* turn on the 26V supply */
++#define CPLD_BACKLIGHT_ON _BIT(1) /* turn on the backlight */
++#define CPLD_DISP_EN _BIT(2) /* note DISP_EN is not wired on the Sharp EVB display board */
++#define CPLD_LCD_OE _BIT(3) /* enable the LCD drive signals */
++#define CPLD_LCD_PWR _BIT(4)
++
++/*
++ * enable the LCD 3.3V or 5V power supply;
++ * does not effect HR-TFT power on the Sharp EVB display board.
++ */
++#define CPLD_LCDP_EN _BIT(4)
++
++
++/* intr_mask bits */
++#define CPLD_TS_INTR_ENABLE _BIT(7) /* Enable touch screen IRQ */
++#define CPLD_CTS_INTR_ENABLE _BIT(6)
++#define CPLD_RI_INTR_ENABLE _BIT(5)
++
++/* misc_status bits */
++#define CPLD_MISCSTS_TS_IRQ _BIT(4) /* Touch Screen caused IRQ */
++#define CPLD_MISCSTS_TS_BUSY _BIT(5) /* Touch Screen busy */
++
++/* L3 mode bits */
++#if 0 // DDD
++#define CPLD_L3_MODE_HI (cpld->l3_mode |= _BIT(0))
++#define CPLD_L3_MODE_LOW (cpld->l3_mode |= ~(_BIT(0)))
++#else
++#define CPLD_L3_MODE_HI cpld->l3_mode = _BIT(0) ; barrier()
++#define CPLD_L3_MODE_LOW cpld->l3_mode = 0; barrier()
++#endif
++
++/* I2S audio control register bits */
++#define CPLD_DAC_USE_REQ1 _BIT(12)
++#define CPLD_ADC_DMA_ENABLE _BIT(7)
++#define CPLD_DAC_DMA_ENABLE _BIT(6)
++#define CPLD_ADC_DMA_AUTO _BIT(5)
++#define CPLD_DAC_DMA_AUTO _BIT(4)
++#define CPLD_ADC_IRQ_ENABLE _BIT(3)
++#define CPLD_DAC_IRQ_ENABLE _BIT(2)
++#define CPLD_ADC_IRQ_STATUS _BIT(1)
++#define CPLD_DAC_IRQ_STATUS _BIT(0)
++#define CPLD_AUDIO_DAC_INT_PENDING _BIT(0)
++#define CPLD_AUDIO_ADC_INT_PENDING _BIT(1)
++#define CPLD_AUDIO_DAC_INT_ENALBED _BIT(2)
++#define CPLD_AUDIO_ADC_INT_ENABLED _BIT(3)
++#define CPLD_AUDIO_DAC_INT_MASK \
++ (CPLD_AUDIO_DAC_INT_PENDING | CPLD_AUDIO_DAC_INT_ENALBED)
++#define CPLD_AUDIO_ADC_INT_MASK \
++ (CPLD_AUDIO_ADC_INT_PENDING | CPLD_AUDIO_ADC_INT_ENABLED)
++
++#define CPLD_ALL_ADC_BITS (CPLD_ADC_IRQ_STATUS | \
++ CPLD_ADC_IRQ_ENABLE | \
++ CPLD_ADC_DMA_AUTO | \
++ CPLD_ADC_DMA_ENABLE)
++
++#define CPLD_ALL_DAC_BITS (CPLD_DAC_IRQ_STATUS | \
++ CPLD_DAC_IRQ_ENABLE | \
++ CPLD_DAC_DMA_AUTO | \
++ CPLD_DAC_DMA_ENABLE | \
++ CPLD_DAC_USE_REQ1)
++
++#define CPLD_ALL_AUDIO_BITS (CPLD_ALL_DAC_BITS | CPLD_ALL_DAC_BITS)
++
++#define CPLD_FS_BIT_FIELD 8
++#define CPLD_FS_BITS _SBF(CPLD_FS_BIT_FIELD, _BITMASK(4) );
++#define CPLD_FS_8000 0
++#define CPLD_FS_11025 1
++#define CPLD_FS_12000 2
++#define CPLD_FS_16000 3
++#define CPLD_FS_22050 4
++#define CPLD_FS_24000 5
++#define CPLD_FS_32000 6
++#define CPLD_FS_44100 7
++#define CPLD_FS_48000 8
++
++#endif // _LH79520_CPLD_H
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/dma.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/dma.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/dma.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/dma.h 2005-11-02 17:42:49.000000000 -0400
+@@ -0,0 +1,63 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/dma.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARCH_DMA_H
++#define __ASM_ARCH_DMA_H
++
++#include <asm/hardware.h>
++#include <asm/arch/cpld.h>
++
++#define MAX_DMA_ADDRESS 0xfffc0000
++
++#define MAX_DMA_CHANNELS 0
++#define LH79520_DMA_CHANNELS 4
++
++/*
++ * All possible LH79520 devices a DMA channel can be attached to.
++ */
++/* FIXME */
++
++typedef enum {
++ DMA_SSP_Rx,
++ DMA_SSP_Tx,
++ DMA_Audio_Out,
++ DMA_Audio_In
++} dma_device_t;
++
++
++typedef void (*dma_callback_t)( void *buf_id, int size );
++
++
++/* LH79520 DMA API */
++extern int lh79520_request_dma( dmach_t *channel, const char *device_id,
++ dma_device_t device );
++extern int lh79520_dma_set_callback( dmach_t channel, dma_callback_t cb );
++extern int lh79520_dma_set_spin( dmach_t channel, dma_addr_t addr, int size );
++extern int lh79520_dma_queue_buffer( dmach_t channel, void *buf_id,
++ dma_addr_t data, int size );
++extern int lh79520_dma_get_current( dmach_t channel, void **buf_id, dma_addr_t *addr );
++extern int lh79520_dma_stop( dmach_t channel );
++extern int lh79520_dma_resume( dmach_t channel );
++extern int lh79520_dma_flush_all( dmach_t channel );
++extern void lh79520_free_dma( dmach_t channel );
++extern int lh79520_dma_sleep( dmach_t channel );
++extern int lh79520_dma_wakeup( dmach_t channel );
++
++#endif /* _ASM_ARCH_DMA_H */
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/gpio.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/gpio.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/gpio.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/gpio.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,139 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/gpio.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Original Author: BarnettH
++ * Date: May 17 2001 17:47:58
++ *
++ * Project: ARM IP headers
++ *
++ * Description:
++ * This file contains the structure definitions and manifest
++ * constants for ARM IP component:
++ * General Purpose Input/Output PrimeCell PL060
++ *
++ * Each GPIO Module has two GPIO (digital IO) ports which are
++ * designated PORTA and PORTB.
++ *
++ * Multiple instances of a GPIO module, and thus port pairs,
++ * may be implemented in a single SOC.
++ *
++ * Each port has eight bits, PORTx[7:0].
++ *
++ * Each port has two 8-bit registers associated with it:
++ * GPIOPxDR - Data register (dr)
++ * GPIOPxDDR - Data Direction register (ddr)
++ *
++ * The specific SOC will have its own unique name for the port.
++ * Each port pair will have its own unique base address for the
++ * port pair.
++ *
++ * This include file is designed to permit the definition of
++ * pointers in the SOC map include file to distinct 8-bit ports
++ * using the name designation is suitable for the SOC
++ * implementation.
++ *
++ * Example:
++ * A map file that includes this file should specify a
++ * base address for each GPIO module, e.g.:
++ *
++ * #define GPIO0_BASE (0xFFFDF000)
++ * #define GPIO1_BASE (0xFFFDE000)
++ * *
++ * *
++ * *
++ *
++ * The SOC map file will use these base addresses to define
++ * pointers to GPIO port A, B, C, D, E, ... thusly:
++ *
++ * #define GPIOPA ((volatile GPIOAREGS *)(GPIO0_BASE))
++ * #define GPIOPB ((volatile GPIOBREGS *)(GPIO0_BASE))
++ * #define GPIOPC ((volatile GPIOAREGS *)(GPIO1_BASE))
++ * #define GPIOPD ((volatile GPIOBREGS *)(GPIO1_BASE))
++ * #define GPIOPE ((volatile GPIOAREGS *)(GPIO2_BASE))
++ * *
++ * *
++ * *
++ *
++ * Example usage of these definitions in user code for Port C:
++ *
++ * unsigned int data;
++ *
++ * GPIOC->ddr = 0xF; sets bits [7:4] as outputs
++ * and bits [3:0] as inputs
++ * GPIOC->dr = 0xF0; sets bits [7:4] to "1"
++ *
++ * data = GPIOC->dr; sets data to the value of
++ * data register
++ *
++ * Note: If it is desired to use the type qualifier "__packed"
++ * to enable packing of structures, the manifest constant
++ * "PACKED" must be defined as follows or as a
++ * predefine at compilation (ARM-specific notation):
++ *
++ * #define PACKED __packed
++ *
++ * If a different compiler/preprocessor is used, the appropriate
++ * notation must be substituted for "__packed".
++ *
++ * Reference: ARM PrimeCell General Purpose Input/Output (PL060)
++ * Technical Reference Manual, ARM DDI 0142B.
++ *
++ * Revision History:
++ *
++ * Rev 1.1 May 17 2001 17:47:58 BarnettH
++ * Changed structure component types to reflect 32-bit access requirements.
++ *
++ * Rev 1.0 Mar 30 2001 16:03:30 BarnettH
++ * Initial revision.
++ *
++ * COPYRIGHT (C) 2001 SHARP MICROELECTRONICS OF THE AMERICAS, INC.
++ * CAMAS, WA
++ *********************************************************************/
++
++#ifndef ARM_GPIO_PL060_H
++#define ARM_GPIO_PL060_H
++
++/* GPIO Register Structures */
++//typedef __attribute((packed)) struct {
++typedef struct {
++ volatile unsigned int dr;
++ volatile unsigned int reserveda1;
++ volatile unsigned int ddr;
++ volatile unsigned int reserveda2;
++} gpioARegs_t;
++
++//typedef __attribute((packed)) struct {
++typedef struct {
++ volatile unsigned int reservedb1;
++ volatile unsigned int dr;
++ volatile unsigned int reservedb2;
++ volatile unsigned int ddr;
++} gpioBRegs_t;
++
++/*
++ * The names and usage of the bit fields in these registers is
++ * implementation specific, so few bit field constants are defined.
++ */
++
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++
++#define SSPFRM_GPIO_BIT _BIT(2)
++#define SSPEN_GPIO_BIT _BIT(0)
++
++#define GPIOPAREGS gpioARegs_t
++#define GPIOPBREGS gpioBRegs_t
++
++#endif /* ARM_GPIO_PL060_H */
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/hardware.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/hardware.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/hardware.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/hardware.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,341 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/hardware.h
++ *
++ * Copyright (C) 2001 Sharp Microelectronics of the Americas, Inc.
++ * CAMAS, WA
++ * Portions Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * References:
++ * (1) Sharp LH79520 Universal Microcontroller User's Guide,
++ * Version 1.x, Sharp Microelectronics of the Americas, Inc.
++ *
++ */
++
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++
++#ifndef _BITMASK
++#define _BITMASK(field_width) ( _BIT(field_width) - 1)
++#endif
++
++/* Hardware addresses of major areas.
++ * *_START is the physical address
++ * *_SIZE is the size of the region
++ * *_BASE is the virtual address
++ */
++
++/*
++ * we can do an identity mapping (V=P) of all of I/O
++ * space, except for the VIC.
++ *
++ * One of the places you can find the VIC is at 0xffff0000,
++ * which is the same place the interrupt vectors want to live,
++ * so we'll leave a hole there, and use the VIC at it's other
++ * address: 0xfffff000.
++ */
++
++#define APB_START 0xfffc0000 /* Physical address of APB I/O space */
++#define APB_BASE 0xfffc0000 /* Virtual address of APB I/O space */
++#define APB_SIZE 0x00026000 /* its size (up to 0xfffe6000) */
++
++#define AHB_START 0xffff1000 /* Physical address of AHB I/O space */
++#define AHB_BASE 0xffff1000 /* Virtual address of AHB I/O space */
++#define AHB_SIZE 0x00004000 /* its size (up to 0xffff5000) */
++
++#define VIC_START VIC_PHYS /* Physical address of VIC */
++#define VIC_BASE 0xfffff000 /* Virtual address of VIC */
++#define VIC_SIZE 0x1000 /* its size */
++
++
++
++#define FLASH_START 0x40000000 /* Flash on SMC bank 0 */
++#define FLASH_BASE 0xf4000000
++#define FLASH_SIZE (4 * 1024 * 1024)
++
++#define EXT_SRAM_START 0x44000000 /* External SRAM on SMC bank 1 */
++#define EXT_SRAM_BASE 0xf4400000
++#define EXT_SRAM_SIZE (2 * 1024 * 1024)
++
++
++// not used, but there is still code that breaks without it
++#define CPLD_START 0x48000000 /* CPLD on SMC bank 2 */
++#define CPLD_BASE 0xf4800000
++#define CPLD_SIZE 4096
++
++#define CS8900_START 0x48000000 /* Ethernet on SMC bank 2 */
++#define CS8900_BASE 0xf4800000
++#define CS8900_SIZE 4096
++
++#define GPOUT16_START 0x4c000000 /* latch on bank 3 */
++#define GPOUT16_BASE 0xf4c00000
++#define GPOUT16_SIZE 4096
++
++
++#define IDE_START 0x50000000 /* CF/IDE on SMC bank 4 */
++#define IDE_BASE 0xf5000000
++#define IDE_SIZE 4096
++
++#define IDE2_START 0x54000000 /* CF/IDE on SMC bank 5 */
++#define IDE2_BASE 0xf5400000
++#define IDE2_SIZE 4096
++
++#define UNUSED_START 0x58000000 /* unused on SMC bank 6 */
++#define RESERVED_START 0x5C000000 /* reserved on SMC bank 7 */
++
++#define INT_SRAM_START 0x60000000 /* on-chip SRAM */
++#define INT_SRAM_BASE 0xf6000000
++#define INT_SRAM_SIZE (32 * 1024)
++
++
++#define IO_START APB_START
++#define IO_BASE APB_BASE
++
++/* macro to get at IO space when running virtually */
++#define IO_ADDRESS(phys) (phys)
++
++#define PCIO_BASE IO_BASE
++
++
++/**********************************************************************
++ * AHB BASES
++ *********************************************************************/
++#define AHB_PHYS (0xFFFF0000)
++#define VIC_PHYS_MIRROR (AHB_PHYS + 0x0000)
++#define SMC_REGS_PHYS (AHB_PHYS + 0x1000)
++#define SDRAM_REGS_PHYS (AHB_PHYS + 0x2000)
++#define LCD_PHYS (AHB_PHYS + 0x4000)
++#define VIC_PHYS (AHB_PHYS + 0xF000)
++
++/**********************************************************************
++ * APB PHYSS
++ *********************************************************************/
++#define APB_PHYS (0xFFFC0000)
++#define UART0_PHYS (APB_PHYS + 0x00000)
++#define UART1_PHYS (APB_PHYS + 0x01000)
++#define UART2_PHYS (APB_PHYS + 0x02000)
++#define PWM_PHYS (APB_PHYS + 0x03000)
++#define TIMER0_PHYS (APB_PHYS + 0x04000)
++#define TIMER1_PHYS (APB_PHYS + 0x05000)
++#define SSP_PHYS (APB_PHYS + 0x06000)
++#define GPIO3_PHYS (APB_PHYS + 0x1C000)
++#define GPIO2_PHYS (APB_PHYS + 0x1D000)
++#define GPIO1_PHYS (APB_PHYS + 0x1E000)
++#define GPIO0_PHYS (APB_PHYS + 0x1F000)
++#define RTC_PHYS (APB_PHYS + 0x20000)
++#define DMAC_PHYS (APB_PHYS + 0x21000)
++#define RCPC_PHYS (APB_PHYS + 0x22000)
++#define WDTIMER_PHYS (APB_PHYS + 0x23000)
++#define LCDICP_PHYS (APB_PHYS + 0x24000)
++#define IOCON_PHYS (APB_PHYS + 0x25000)
++
++/**********************************************************************
++ * REMAPping
++ *********************************************************************/
++#define SDRAM_MEM_PHYS (0x20000000)
++#define SMC_MEM_PHYS (0x40000000)
++#define INTERNAL_MEM_PHYS (0x60000000)
++
++// DDD #if REMAP == 0
++#define SMC_MIRROR_MEM_PHYS (0x00000000)
++// DDD #elif REMAP == 1
++// DDD #define SDRAM_MIRROR_MEM_PHYS (0x00000000)
++// DDD #elif REMAP == 2
++// DDD #define INTERNAL_MIRROR_MEM_PHYS (0x00000000)
++// DDD #else
++// DDD #error REMAP must be defined as 0, 1, or 2
++// DDD #endif
++
++/**********************************************************************
++ * xSPR bits
++ *********************************************************************/
++#define CORE_IRQ _BIT(7)
++#define CORE_FIQ _BIT(6)
++
++/**********************************************************************
++ * SMC Memory Bank Address Space Bases
++ *********************************************************************/
++
++#define SMC_BANK0_PHYS (SMC_MEM_PHYS + 0x00000000)
++#define SMC_BANK1_PHYS (SMC_MEM_PHYS + 0x04000000)
++#define SMC_BANK2_PHYS (SMC_MEM_PHYS + 0x08000000)
++#define SMC_BANK3_PHYS (SMC_MEM_PHYS + 0x0C000000)
++#define SMC_BANK4_PHYS (SMC_MEM_PHYS + 0x10000000)
++#define SMC_BANK5_PHYS (SMC_MEM_PHYS + 0x14000000)
++#define SMC_BANK6_PHYS (SMC_MEM_PHYS + 0x18000000)
++#define SMC_BANK7_PHYS (SMC_MEM_PHYS + 0x1C000000)
++
++/**********************************************************************
++ * SDRAMC Memory Bank Address Space Bases
++ *********************************************************************/
++
++#define SDRAM_BANK0_PHYS (SDRAM_MEM_PHYS + 0x00000000)
++#define SDRAM_BANK1_PHYS (SDRAM_MEM_PHYS + 0x08000000)
++
++/**********************************************************************
++ * Vectored Interrupt Controller (VIC)
++ *********************************************************************/
++#define VICID_OFFSET (0xFE0)
++// DDD #define VIC ((VICREGS *)(VIC_PHYS))
++// DDD #define VICID ((VICIDREGS *)(VIC_PHYS + VICID_OFFSET))
++#define VIC_INT_TYPE_IRQ 0
++#define VIC_INT_TYPE_FIQ 1
++
++/* VIC Interrupt Sources */
++#define VIC_EXTINT0 0
++#define VIC_EXTINT1 1
++#define VIC_EXTINT2 2
++#define VIC_EXTINT3 3
++#define VIC_EXTINT4 4
++#define VIC_EXTINT5 5
++#define VIC_EXTINT6 6
++#define VIC_EXTINT7 7
++#define VIC_SPEXTINT0 8
++#define VIC_SPEXTINT1 9
++#define VIC_SPEXTINT2 10
++#define VIC_SPEXTINT3 11
++#define VIC_CLCDC 12
++#define VIC_SSPTXINTR 13
++#define VIC_SSPRXINTR 14
++#define VIC_SSPRORINTR 15
++#define VIC_SSPINTR 16
++#define VIC_TIMER0 17
++#define VIC_TIMER1 18
++#define VIC_TIMER2 19
++#define VIC_TIMER3 20
++#define VIC_UART0_RX 21
++#define VIC_UART0_TX 22
++#define VIC_UART0 23
++#define VIC_UART1 24
++#define VIC_UART2 25
++#define VIC_DMA0 26
++#define VIC_DMA1 27
++#define VIC_DMA2 28
++#define VIC_DMA3 29
++#define VIC_RTC 30
++#define VIC_WDT 31
++
++/* VIC Vectors */
++#define VIC_VECT_0 0
++#define VIC_VECT_1 1
++#define VIC_VECT_2 2
++#define VIC_VECT_3 3
++#define VIC_VECT_4 4
++#define VIC_VECT_5 5
++#define VIC_VECT_6 6
++#define VIC_VECT_7 7
++#define VIC_VECT_8 8
++#define VIC_VECT_9 9
++#define VIC_VECT_10 10
++#define VIC_VECT_11 11
++#define VIC_VECT_12 12
++#define VIC_VECT_13 13
++#define VIC_VECT_14 14
++#define VIC_VECT_15 15
++#define VIC_VECT_MAX VIC_VECT_15
++#define VIC_VECT_DEFAULT ~(0)
++
++
++#define XTAL_IN 14745600 /* 14.7456 MHz crystal */
++#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */
++
++
++
++/**********************************************************************
++ * UART'S
++ *********************************************************************/
++#define UARTID_OFFSET (0xFE0)
++// DDD #define UART0 ((UARTREGS *)(UART0_PHYS))
++// DDD #define UART1 ((UARTREGS *)(UART1_PHYS))
++// DDD #define UART2 ((UARTREGS *)(UART2_PHYS))
++// DDD #define UART0ID ((UARTIDREGS *)(UART0_PHYS + UARTID_OFFSET))
++// DDD #define UART1ID ((UARTIDREGS *)(UART1_PHYS + UARTID_OFFSET))
++// DDD #define UART2ID ((UARTIDREGS *)(UART2_PHYS + UARTID_OFFSET))
++
++/**********************************************************************
++ * IRDA
++ *********************************************************************/
++// DDD #define IRDA0 ((UARTREGS *)(UART0_PHYS))
++// DDD #define IRDA1 ((UARTREGS *)(UART1_PHYS))
++// DDD #define IRDA2 ((UARTREGS *)(UART2_PHYS))
++
++/**********************************************************************
++ * Pulse Width Modulator (PWM)
++ *********************************************************************/
++// DDD #define PWMX_OFFSET (0x20)
++// DDD #define PWM ((PWMREGS *)(PWM_PHYS))
++// DDD #define PWM0 ((PWMXREGS *)(PWM_PHYS))
++// DDD #define PWM1 ((PWMXREGS *)(PWM_PHYS + PWMX_OFFSET))
++
++/**********************************************************************
++ * TIMER
++ *********************************************************************/
++// DDD #define TIMER2_OFFSET (0x20)
++// DDD #define TIMER0 ((TIMERREG *)(TIMER0_PHYS))
++// DDD #define TIMER1 ((volatile TIMERREG *)(TIMER0_PHYS + TIMER2_OFFSET))
++// DDD #define TIMER2 ((TIMERREG *)(TIMER1_PHYS))
++// DDD #define TIMER3 ((TIMERREG *)(TIMER1_PHYS + TIMER2_OFFSET))
++
++/**********************************************************************
++ * Synchronous Serial Port (SSP)
++ *********************************************************************/
++// DDD #define SSP ((SSPREGS *)(SSP_PHYS))
++
++/**********************************************************************
++ * General Purpose Input/Output (GPIO)
++ *********************************************************************/
++#define GPIOA ((GPIOPAREGS *)(GPIO0_PHYS))
++#define GPIOB ((GPIOPBREGS *)(GPIO0_PHYS))
++#define GPIOC ((GPIOPAREGS *)(GPIO1_PHYS))
++#define GPIOD ((GPIOPBREGS *)(GPIO1_PHYS))
++#define GPIOE ((GPIOPAREGS *)(GPIO2_PHYS))
++#define GPIOF ((GPIOPBREGS *)(GPIO2_PHYS))
++#define GPIOG ((GPIOPAREGS *)(GPIO3_PHYS))
++#define GPIOH ((GPIOPBREGS *)(GPIO3_PHYS))
++
++/**********************************************************************
++ * Real Time Clock (RTC)
++ *********************************************************************/
++// DDD #define RTC ((RTCREGS *)(RTC_PHYS))
++
++/**********************************************************************
++ * DMA Controller (DMAC)
++ *********************************************************************/
++// DDD #define DMAC ((DMACREGS *)(DMAC_PHYS))
++
++/**********************************************************************
++ * Reset, Clock, and Power Controller (RCPC)
++ *********************************************************************/
++// DDD #define RCPC ((RCPCREGS *)(RCPC_PHYS))
++
++/**********************************************************************
++ * Watchdog Timer (WDTIMER)
++ *********************************************************************/
++// DDD #define WDTIMER ((WDTIMERREGS *)(WDTIMER_PHYS))
++
++/**********************************************************************
++ * LCD Interface Control Processor (LCDICP)
++ *********************************************************************/
++// DDD #define LCDICP ((LCDICPREGS *)(LCDICP_PHYS))
++
++/**********************************************************************
++ * IOCON
++ *********************************************************************/
++// DDD #define IOCON ((IOCONREGS *)(IOCON_PHYS))
++
++/**********************************************************************
++ * GPOUT16 (MARMALADE)
++ *********************************************************************/
++#define nLED _BIT(8)
++#define TS_DIN _BIT(9)
++#define nTS_CS _BIT(10)
++#define TS_DCLK _BIT(11)
++#define BACKLIGHT _BIT(15)
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/ide.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/ide.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/ide.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/ide.h 2005-11-02 17:48:27.000000000 -0400
+@@ -0,0 +1,58 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/ide.h
++ *
++ * Copyright 2002 Lineo, Inc.
++ *
++ * 17-Jan-2002: Initial clone of arch-anakin/ide.h
++ */
++
++#include <linux/config.h>
++#include <asm/irq.h>
++#include <asm/hardware.h>
++
++/*
++ * Set up a hw structure for a specified data port, control port and IRQ.
++ * This should follow whatever the default interface uses.
++ */
++static __inline__ void
++ide_init_hwif_ports(hw_regs_t *hw, int data_port, int ctrl_port, int *irq)
++{
++ ide_ioreg_t reg;
++ int i;
++ int regincr = 4;
++
++ memset(hw, 0, sizeof(*hw));
++
++ reg = (ide_ioreg_t)data_port;
++
++ for( i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
++ hw->io_ports[i] = reg;
++ reg += regincr;
++ }
++
++ hw->io_ports[IDE_CONTROL_OFFSET] = (ide_ioreg_t) ctrl_port;
++
++ if (irq)
++ *irq = 0;
++}
++
++
++/*
++ * This registers the standard ports for this architecture with the IDE
++ * driver.
++ */
++static __inline__ void
++ide_init_default_hwifs(void)
++{
++ hw_regs_t hw;
++
++ /*
++ * The IDE data ports are mapped in at IDE_BASE, and are aligined on 32 bit boundaries
++ * The IDE control port (usually found at port 0x3f6 on a PC, e.g.) is 6 ints into IDE_BASE2.
++ */
++ ide_init_hwif_ports( &hw, IDE_BASE, (char *)IDE2_BASE + 6*sizeof(int), NULL);
++ hw.irq = IRQ_CF;
++ ide_register_hw( &hw, NULL);
++}
++
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/iocon.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/iocon.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/iocon.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/iocon.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,210 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/iocon.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ * COPYRIGHT (C) 2001 SHARP MICROELECTRONICS OF THE AMERICAS, INC.
++ * CAMAS, WA
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Description:
++ * This file contains the structure definitions and manifest
++ * constants for ARM IP component:
++ * I/O Configuration Block
++ *
++ * References:
++ * (1) Sharp LH79520 Universal Microcontroller User's Guide,
++ * Version 1.x, Sharp Microelectronics of the Americas, Inc.
++ * (2) ARM Isis Technical Reference Manual, System on Chip Group,
++ * ARM SC063-TRM-0001-B
++ *
++ *********************************************************************/
++
++#ifndef LH79520_IOCON_H
++#define LH79520_IOCON_H
++
++#if 0
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++#endif // 0
++
++/*
++ * IO Configuration Block Structure
++ */
++typedef struct {
++ volatile unsigned int MemMux;
++ volatile unsigned int LCDMux;
++ volatile unsigned int MiscMux;
++ volatile unsigned int DMAMux;
++ volatile unsigned int UARTMux;
++ volatile unsigned int SSIMux;
++ volatile unsigned int Scratchreg;
++} ioconRegs_t;
++
++/*
++ * Memory Multiplexing IOCON Register Bit Field constants
++ */
++#define MEMMUX_PIOE_NOMUX _SBF(0,0)
++#define MEMMUX_MIDQM32 _SBF(0,1)
++#define MEMMUX_MIDQM30 _SBF(0,3)
++#define MEMMUX_PIOE4 _SBF(2,0)
++#define MEMMUX_MINWE _SBF(2,1)
++#define MEMMUX_PIOE5 _SBF(3,0)
++#define MEMMUX_MISDNCS0 _SBF(3,1)
++#define MEMMUX_PIOE6 _SBF(4,0)
++#define MEMMUX_MISDNCS1 _SBF(4,1)
++#define MEMMUX_PIOE7 _SBF(5,0)
++#define MEMMUX_MICKE _SBF(5,1)
++#define MEMMUX_PIOF0 _SBF(6,0)
++#define MEMMUX_MICLKIO _SBF(6,1)
++#define MEMMUX_PIO_X _SBF(7,0)
++#define MEMMUX_MIDATA_X _SBF(7,1)
++#define MEMMUX_PIOH2 _SBF(8,0)
++#define MEMMUX_MICSN3 _SBF(8,1)
++#define MEMMUX_PIOH3 _SBF(9,0)
++#define MEMMUX_MICSN4 _SBF(9,1)
++#define MEMMUX_PIOH4 _SBF(10,0)
++#define MEMMUX_MICSN5 _SBF(10,1)
++#define MEMMUX_PIOH5 _SBF(11,0)
++#define MEMMUX_MICSN6 _SBF(11,1)
++#define MEMMUX_PIOH6 _SBF(12,0)
++#define MEMMUX_MIBLSN2 _SBF(12,1)
++#define MEMMUX_PIOH7 _SBF(13,0)
++#define MEMMUX_MIBLSN3 _SBF(13,1)
++
++/*
++ * LCD Multiplexing IOCON Register Bit Field constants
++ */
++#define LCDMUX_PIOB4 _SBF(0,0)
++#define LCDMUX_CLD12 _SBF(0,1)
++#define LCDMUX_CLREV _SBF(0,2)
++#define LCDMUX_PIOB5 _SBF(2,0)
++#define LCDMUX_CLD13 _SBF(2,1)
++#define LCDMUX_PIOB6 _SBF(3,0)
++#define LCDMUX_CLD14 _SBF(3,1)
++#define LCDMUX_PIOB7 _SBF(4,0)
++#define LCDMUX_CLD15 _SBF(4,1)
++#define LCDMUX_CLDSPLEN _SBF(4,2)
++#define LCDMUX_PIOC0 _SBF(6,0)
++#define LCDMUX_CLDEN _SBF(6,1)
++#define LCDMUX_CLSPL _SBF(6,2)
++#define LCDMUX_PIOC1 _SBF(8,0)
++#define LCDMUX_CLVDDEN _SBF(8,1)
++#define LCDMUX_CLS _SBF(8,2)
++#define LCDMUX_PIOC2 _SBF(10,0)
++#define LCDMUX_CLXCLK _SBF(10,1)
++#define LCDMUX_PIOC3 _SBF(11,0)
++#define LCDMUX_CLCP _SBF(11,1)
++#define LCDMUX_PIOC4 _SBF(12,0)
++#define LCDMUX_CLD16 _SBF(12,1)
++#define LCDMUX_PIOC5 _SBF(13,0)
++#define LCDMUX_CLLP _SBF(13,1)
++#define LCDMUX_CLP _SBF(13,2)
++#define LCDMUX_PIOC6 _SBF(15,0)
++#define LCDMUX_CLD17 _SBF(15,1)
++#define LCDMUX_PIOC7 _SBF(16,0)
++#define LCDMUX_CLFP _SBF(16,1)
++#define LCDMUX_CLSPS _SBF(16,2)
++#define LCDMUX_PIOD0 _SBF(18,0)
++#define LCDMUX_CLD2 _SBF(18,1)
++#define LCDMUX_PIOD1 _SBF(19,0)
++#define LCDMUX_CLD3 _SBF(19,1)
++#define LCDMUX_PIOD2 _SBF(20,0)
++#define LCDMUX_CLD4 _SBF(20,1)
++#define LCDMUX_PIOD3 _SBF(21,0)
++#define LCDMUX_CLD5 _SBF(21,1)
++#define LCDMUX_PIOD4 _SBF(22,0)
++#define LCDMUX_CLD6 _SBF(22,1)
++#define LCDMUX_CPS _SBF(22,2)
++#define LCDMUX_PIOD5 _SBF(24,0)
++#define LCDMUX_CLD7 _SBF(24,1)
++#define LCDMUX_PIOD6 _SBF(25,0)
++#define LCDMUX_CLD8 _SBF(25,1)
++#define LCDMUX_PIOD7 _SBF(26,0)
++#define LCDMUX_CLD9 _SBF(26,1)
++#define LCDMUX_RCEII6 _SBF(27,0)
++#define LCDMUX_CLD10 _SBF(27,1)
++#define LCDMUX_RCEII7 _SBF(28,0)
++#define LCDMUX_CLD11 _SBF(28,1)
++
++/*
++ * Miscellaneous Multiplexing IOCON Register Bit Field constants
++ */
++#define MISCMUX_PWM1 _SBF(0,0)
++#define MISCMUX_DCDEOT1 _SBF(0,1)
++#define MISCMUX_PIOA5 _SBF(1,0)
++#define MISCMUX_RCCLKOUT _SBF(1,1)
++#define MISCMUX_PIOA6 _SBF(2,0)
++#define MISCMUX_RCEII0 _SBF(2,1)
++#define MISCMUX_PIOA7 _SBF(3,0)
++#define MISCMUX_RCEII1 _SBF(3,1)
++#define MISCMUX_PIOB0 _SBF(4,0)
++#define MISCMUX_RCEII2 _SBF(4,1)
++#define MISCMUX_RCEII3 _SBF(5,0)
++#define MISCMUX_PWM0SYNC _SBF(5,1)
++#define MISCMUX_RCEII4 _SBF(6,0)
++#define MISCMUX_PWM0 _SBF(6,1)
++#define MISCMUX_RCCTOUT _SBF(7,0)
++#define MISCMUX_DCDACK1 _SBF(7,1)
++#define MISCMUX_DCDREQ1 _SBF(8,0)
++#define MISCMUX_RCEII5 _SBF(8,1)
++#define MISCMUX_PIOF1 _SBF(9,0)
++#define MISCMUX_RCCLKEN _SBF(9,1)
++#define MISCMUX_RCCLKIN _SBF(10,0)
++#define MISCMUX_RCUTCLK _SBF(10,1)
++
++/*
++ * DMA Multiplexing IOCON Register Bit Field constants
++ */
++#define DMAMUX_PIOB1 _SBF(0,0)
++#define DMAMUX_DCDEOT0 _SBF(0,1)
++#define DMAMUX_PIOB2 _SBF(1,0)
++#define DMAMUX_DCDACK0N _SBF(1,1)
++#define DMAMUX_PIOB3 _SBF(2,0)
++#define DMAMUX_DCDREQ0 _SBF(2,1)
++
++/*
++ * UART Multiplexing IOCON Register Bit Field constants
++ */
++#define UARTMUX_UT0IRRXA _SBF(0,0)
++#define UARTMUX_UT0RXD _SBF(0,1)
++#define UARTMUX_UT0IRTXA _SBF(1,0)
++#define UARTMUX_UT0TXD _SBF(1,1)
++#define UARTMUX_PIOA3 _SBF(2,0)
++#define UARTMUX_UT1RXD _SBF(2,1)
++#define UARTMUX_PIOA4 _SBF(3,0)
++#define UARTMUX_UT1TXD _SBF(3,1)
++
++/*
++ * SSI Multiplexing IOCON Register Bit Field constants
++ */
++#define SSIMUX_SSPIN _SBF(0,0)
++#define SSIMUX_UT2RXD _SBF(0,1)
++#define SSIMUX_SSPOUT _SBF(1,0)
++#define SSIMUX_UT2TXD _SBF(1,1)
++#define SSIMUX_PIOA0 _SBF(2,0)
++#define SSIMUX_SSPENB _SBF(2,1)
++#define SSIMUX_PIOA1 _SBF(3,0)
++#define SSIMUX_SSPCLK _SBF(3,1)
++#define SSIMUX_PIOA2 _SBF(4,0)
++#define SSIMUX_SSPFRM _SBF(4,1)
++
++#endif /* LH79520_IOCON_H */
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/io.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/io.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/io.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/io.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,52 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/io.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARM_ARCH_IO_H
++#define __ASM_ARM_ARCH_IO_H
++
++#define IO_SPACE_LIMIT 0xffffffff
++
++/*
++ * We don't actually have real ISA nor PCI buses, but there is so many
++ * drivers out there that might just work if we fake them...
++ */
++// DDD #define __io(a) (PCIO_BASE + (a))
++#define __io(a) (a)
++#define __mem_pci(a) ((unsigned long)(a))
++#define __mem_isa(a) ((unsigned long)(a))
++
++/*
++ * Generic virtual read/write
++ */
++#define __arch_getw(a) (*(volatile unsigned short *)(a))
++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
++#define __arch_ioremap __ioremap
++#define __arch_iounmap __iounmap
++
++/*
++ * Validate the pci memory address for ioremap.
++ */
++// DDD #define iomem_valid_addr(iomem,size) (1)
++
++/*
++ * Convert PCI memory space to a CPU physical address
++ */
++// DDD #define iomem_to_phys(iomem) (iomem)
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/irq.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/irq.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/irq.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/irq.h 2005-11-02 17:51:52.000000000 -0400
+@@ -0,0 +1,250 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/irq.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/delay.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/rcpc.h>
++#include <asm/arch/iocon.h>
++#if 0
++#include <asm/arch/cpld.h> // DDD only for testing the switches
++#endif
++
++
++#define NR_VEC 16 /* number of vectors */
++/*
++ * Vectored Interrupt Controller Module Register Structure
++ */
++typedef struct {
++ u32 IRQStatus; /* masked IRQ status */
++ u32 FIQStatus; /* masked FIQ status */
++ u32 RawIntr; /* raw status */
++ u32 IntSelect; /* select whether source generates IRQ or FIQ */
++ u32 IntEnable; /* int enable mask */
++ u32 IntEnClear; /* writes here clear bits in IntEnable */
++ u32 SoftInt; /* gen soft interrupts */
++ u32 SoftIntClear; /* writes here clear bits in SoftInt */
++ u32 Protection; /* protection enable */
++ u32 reserved1[3];
++ u32 CurrentISR; /* interrupt vector address of current interrupt */
++ u32 DefVectAddr; /* default vector address */
++ u32 reserved2[50];
++ u32 VectAddr[NR_VEC]; /* interrupt vector address 0...NR_VEC */
++ u32 reserved3[48];
++ u32 VectCntl[NR_VEC]; /* vector control 0...NR_VEC */
++ u32 reserved4[48];
++ u32 ITCR; /* test mode */
++ u32 ITIP1; /* test mode */
++ u32 ITIP2; /* test mode */
++ u32 ITOP1; /* test mode */
++ u32 ITOP2; /* test mode */
++ u32 reserved5[819]; /* empty */
++ u32 periphid[4]; /* Peripheral ID register bits */
++ u32 cellid[4]; /* PrimeCell ID register bits */
++} vicRegs_t;
++
++
++/**********************************************************************
++ * Vectored Interrupt Controller Register Bit Fields
++ *********************************************************************/
++
++/**********************************************************************
++ * The bit fields of the following registers have implementation
++ * specific meaning, and must be defined at the implementation level.
++ *
++ * irqstatus - VICIRQStatus
++ * fiqstatus - VICFIQStatus
++ * rawintr - VICRawIntr
++ * intselect - VICIntSelect
++ * intenable - VICIntEnable
++ * intenclear - VICIntEnClear
++ * softint - VICSoftInt
++ * softintclear- VICSoftIntClear
++ *
++ * The following definitions for these registers are generic,
++ * i.e., they are implementation independent. They can be used to
++ * create implementation specific macros.
++ *********************************************************************/
++
++/**********************************************************************
++ * VIC Interrupt Select Register Bit Fields
++ *********************************************************************/
++/* The following can be OR'd with the IntSelect Register to select
++ * an interrupt as FIQ. */
++#define VIC_INTSELECT_FIQ(n) _BIT((n) & 0x1F)
++/* The following can be AND'd with the IntSelect Register to select
++ * an interrupt as IRQ. */
++#define VIC_INTSELECT_IRQ(n) ~(_BIT((n) & 0x1F))
++
++/**********************************************************************
++ * VIC Interrupt Enable, Interrupt Enable Clear Register Bit Fields
++ * VIC Soft Interrupt, Soft Interrupt Clear Register Bit Fields
++ *********************************************************************/
++#define VIC_INT_ENABLE(n) _BIT((n) & 0x1F)
++#define VIC_INT_CLEAR(n) _BIT((n) & 0x1F)
++
++/**********************************************************************
++ * VIC Protection Enable Register Bit Fields
++ *********************************************************************/
++#define VIC_PROTECTION _BIT(0)
++
++/**********************************************************************
++ * VIC Vector Address Clear Register
++ *********************************************************************/
++#define VIC_VECTORADDR_CLEAR 0
++
++/**********************************************************************
++ * VIC Vector Control Register Bit Fields
++ *********************************************************************/
++/* To revise a Vector Control Register, clear the register, then
++ * use the SELECT macro to associate a line and enable the vector
++ * with the same operation.
++ * The ENABLE macro is provided for completeness.
++ * Use this register to enable and disable the VECTOR feature;
++ * use the intenable register to enable the interrupt
++ * itself, and the intenclear register to clear the interrupt. */
++#define VIC_VECTCNTL_SELECT(n) (_SBF(0,((n) & 0x1F)) | _BIT(5))
++#define VIC_VECTCNTL_ENABLE _BIT(5)
++
++/**********************************************************************
++ * Vectored Interrupt Controller Test Registers
++ *********************************************************************/
++/**********************************************************************
++ * itcr - Test Control
++ *********************************************************************/
++#define VIC_ITCR_ITEN _BIT(0)
++
++/**********************************************************************
++ * itip1 - Test Input 1
++ *********************************************************************/
++#define VIC_ITIP1_F _BIT(6)
++#define VIC_ITIP1_I _BIT(7)
++
++/**********************************************************************
++ * itop1 - Test Output 1
++ *********************************************************************/
++#define VIC_ITOP1_F _BIT(6)
++#define VIC_ITOP1_I _BIT(7)
++
++
++
++
++#define fixup_irq(i) (i)
++
++#define TESTIRQ
++
++#ifdef TESTIRQ // DDD
++static unsigned int myReadCp15(void)
++{
++ unsigned int x;
++ asm ("mrc p15, 0, %0, c1, c0, 0;" : "=r"(x) : );
++ return x;
++}
++#endif
++
++
++
++static void lh79520_mask_irq( u32 irq)
++{
++ vicRegs_t *vic = (vicRegs_t *)VIC_BASE;
++ vic->IntEnClear = (1 << irq);
++}
++
++static void lh79520_unmask_irq( u32 irq)
++{
++ vicRegs_t *vic = (vicRegs_t *)VIC_BASE;
++
++#ifdef TESTIRQ
++ if (irq != 17)
++ udelay(1); // printk( "VIC unmask irq %d\n", irq);
++#endif // 0 DDD
++ vic->IntEnable = (1 << irq);
++}
++
++#undef TESTIRQ
++
++static __inline__ void irq_init_irq(void)
++{
++ int irq, i;
++ vicRegs_t *vic = (vicRegs_t *)VIC_BASE;
++ rcpcRegs_t *rcpc = (rcpcRegs_t *)IO_ADDRESS( RCPC_PHYS);
++ ioconRegs_t *iocon = (ioconRegs_t *)IO_ADDRESS( IOCON_PHYS);
++
++ /* allow external interrupts to come in */
++ iocon->MiscMux = MISCMUX_RCEII0 |
++ MISCMUX_RCEII1 |
++ MISCMUX_RCEII2;
++
++#ifdef TESTIRQ // DDD
++ printk( "irq_init_irq() cr1=%08X\n", myReadCp15());
++ printk( "vic=0x%08lX rcpc=0x%08lX\n", (unsigned long) vic, (unsigned long) rcpc);
++ printk( "vic periph id[0-3] = 0x%X 0x%X 0x%X 0x%X\n", vic->periphid[0], vic->periphid[1], vic->periphid[2], vic->periphid[3]);
++#endif // 0
++
++ vic->IntEnClear = 0xffffffff; /* clear all interrupt enables */
++ vic->IntSelect = 0; /* everything generates IRQ */
++
++ // DDD don't want to do this !! vic->Protection = 1; /* allow only priviledged access */
++
++ /* disable vectored interrupts */
++ for( i = 0; i < NR_VEC; i++) {
++ vic->VectAddr[i] = 0;
++ vic->VectCntl[i] = 0;
++ }
++
++ for (irq = 0; irq < NR_IRQS; irq++) {
++ irq_desc[irq].valid = 1;
++ irq_desc[irq].probe_ok = 1;
++ irq_desc[irq].mask_ack = lh79520_mask_irq;
++ irq_desc[irq].mask = lh79520_mask_irq;
++ irq_desc[irq].unmask = lh79520_unmask_irq;
++ }
++
++ /*
++ * External interrupts 0-2 and 6-7 are active LOW, and External
++ * interrupts 3-5 are active HIGH. <---= DDD wrong
++ */
++
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED; /* unlock RCPC registers */
++ barrier();
++
++ rcpc->intClear = 0xff; /* clear all external interrupts */
++
++ rcpc->intConfig = (
++ RCPC_INTCONFIG( RCPC_INT1, RCPC_INT_HLT) | // irq 1 (ide) high level
++ RCPC_INTCONFIG( RCPC_INT2, RCPC_INT_LLT) | // irq 2 (MARMALADE ETH) is low level
++ RCPC_INTCONFIG( RCPC_INT3, RCPC_INT_FET) | // irq 3 (MARMALADE TS) active low
++ RCPC_INTCONFIG( RCPC_INT4, RCPC_INT_HLT) |
++ RCPC_INTCONFIG( RCPC_INT5, RCPC_INT_HLT) |
++ RCPC_INTCONFIG( RCPC_INT6, RCPC_INT_LLT)
++ );
++
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED; /* lock RCPC registers */
++ printk( "RCPC locked ->control=0x%08lX\n", (unsigned long) rcpc->control);
++ printk( "RCPC ->intConfig = 0x%08lX\n", (unsigned long) rcpc->intConfig);
++
++#if 0
++ { // DDD test the switches
++ cpldRegs_t *cpld = (cpldRegs_t *)CPLD_BASE;
++ cpld->intr_mask = 0x1f;
++ }
++#endif
++
++ // DDD init_FIQ();
++}
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/irqs.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/irqs.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/irqs.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/irqs.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,51 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/irqs.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_ARCH_IRQS_H
++#define __ASM_ARCH_IRQS_H
++
++#define NR_IRQS 32
++
++
++#define IRQ_ETHERNET 0
++#define IRQ_CF 1
++#define IRQ_CPLD 2
++#define IRQ_PWM0SYNC 3
++#define IRQ_PWM0 4
++#define IRQ_DREQ1 5
++#define IRQ_LCDVD10 6
++#define IRQ_LCDVD11 7
++#define IRQ_spare_i0 8 /* spare internal */
++#define IRQ_spare_i1 9 /* spare internal */
++#define IRQ_spare_i2 10 /* spare internal */
++#define IRQ_SPEXTINT3 11
++#define IRQ_LCD 12
++#define IRQ_SSPTXINTR 13
++#define IRQ_SSPRXINTR 14
++#define IRQ_SSPRORINTR 15
++#define IRQ_SSPINTR 16
++#define IRQ_TIMER0 17
++#define IRQ_TIMER1 18
++#define IRQ_TIMER2 19
++#define IRQ_TIMER3 20
++#define IRQ_UART0_RX 21
++#define IRQ_UART0_TX 22
++#define IRQ_UART0 23
++#define IRQ_UART1 24
++#define IRQ_UART2 25
++#define IRQ_DMA 26 /* all DMA channels */
++#define IRQ_spare_i4 27 /* spare internal */
++#define IRQ_spare_i5 28 /* spare internal */
++#define IRQ_spare_i6 29 /* spare internal */
++#define IRQ_RTC 30
++#define IRQ_WDT 31
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/keyboard.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/keyboard.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/keyboard.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/keyboard.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,15 @@
++/*
++ * linux/include/asm-arm/arch-anakin/keyboard.h
++ *
++ * Copyright (C) 2001 Aleph One Ltd. for Acunia N.V.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Changelog:
++ * 11-Apr-2001 TTC Created
++ */
++#define kbd_init_hw() do { } while (0)
++#define kbd_enable_irq() do { } while (0)
++#define kbd_disable_irq() do { } while (0)
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/lh7x-7seg.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/lh7x-7seg.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/lh7x-7seg.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/lh7x-7seg.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,71 @@
++/* vi: set sw=4 ts=4 ai: */
++
++#ifndef _LH79X_7SEG_H_
++#define _LH79X_7SEG_H_
++
++/**********************************************************************
++* linux/drivers/misc/lh79x_7seg.c
++*
++* Provide ADS_784x 7-Segment access for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++/**********************************************************************
++* The sharp 7-segment display
++*
++* _ == a
++* | | == f b
++* - == g
++* | | == e c
++* -. == d dot
++*
++* NOTE: The 7-segment display bars are bit-mapped.
++* NOTE: The 7-segment display bars are ACTIVE LOW.
++*
++* NOTE: When read, the 7-segment display does not return valid data. As a
++* result, it is HIGHLY recommended daemons accessing the display
++* use the provided routines which programatically track the current
++* value of the display to simulate read functionality. Otherwise,
++* application access of the display will be tainted.
++*
++**********************************************************************/
++
++#define SSD_A 0x01
++#define SSD_B 0x02
++#define SSD_C 0x04
++#define SSD_D 0x08
++#define SSD_E 0x10
++#define SSD_F 0x20
++#define SSD_G 0x40
++#define SSD_DOT 0x80
++#define SSD_DP SSD_DOT
++
++#ifdef KERNEL
++
++extern uint16_t lh79x_7seg_read_raw_display(void);
++extern u_char lh79x_7seg_read_raw_display_lsb(void);
++extern u_char lh79x_7seg_read_raw_display_msb(void);
++
++extern uint16_t lh79x_7seg_read_display(void);
++extern u_char lh79x_7seg_read_display_lsb(void);
++extern u_char lh79x_7seg_read_display_msb(void);
++
++extern void lh79x_7seg_write_raw_display(uint16_t raw_val);
++extern void lh79x_7seg_write_raw_display_lsb(u_char raw_lsb);
++extern void lh79x_7seg_write_raw_display_msb(u_char raw_msb);
++
++extern void lh79x_7seg_write_display(uint16_t val)
++extern void lh79x_7seg_write_display_lsb(u_char lsb)
++extern void lh79x_7seg_write_display_msb(u_char msb)
++extern void lh79x_7seg_write_display_str(u_char *str);
++
++#endif /* KERNEL */
++
++#endif /* _LH79X_7SEG_H_ */
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/memory.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/memory.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/memory.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/memory.h 2005-11-02 17:42:57.000000000 -0400
+@@ -0,0 +1,116 @@
++/*
++ * linux/include/asm-arm/arch-sa1100/memory.h
++ *
++ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
++ */
++
++#ifndef __ASM_ARCH_MEMORY_H
++#define __ASM_ARCH_MEMORY_H
++
++#include <linux/config.h>
++
++/*
++ * Task size: 3GB
++ */
++#define TASK_SIZE (0xc0000000UL)
++#define TASK_SIZE_26 (0x04000000UL)
++
++/*
++ * This decides where the kernel will search for a free chunk of vm
++ * space during mmap's.
++ */
++#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
++
++/*
++ * Page offset: 3GB
++ */
++#define PAGE_OFFSET (0xc0000000UL)
++
++/*
++ * Physical DRAM offset is 0xc0000000 on the SA1100
++ */
++#define PHYS_OFFSET (0x20000000UL)
++#define PHYS_OFFSET2 (0x28000000UL) /* Phys addr of second bank of SDRAM */
++
++/*
++ * We take advantage of the fact that physical and virtual address can be the
++ * same. The NUMA code is handling the large holes that might exist between
++ * all memory banks.
++ */
++#define __virt_to_phys__is_a_macro
++#define __phys_to_virt__is_a_macro
++#define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
++#define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
++
++/*
++ * Virtual view <-> DMA view memory address translations
++ * virt_to_bus: Used to translate the virtual address to an
++ * address suitable to be passed to set_dma_addr
++ * bus_to_virt: Used to convert an address for DMA operations
++ * to an address that the kernel can use.
++ *
++ * On the SA1100, bus addresses are equivalent to physical addresses.
++ */
++#define __virt_to_bus__is_a_macro
++#define __bus_to_virt__is_a_macro
++#define __virt_to_bus(x) __virt_to_phys(x)
++#define __bus_to_virt(x) __phys_to_virt(x)
++
++#ifdef CONFIG_DISCONTIGMEM
++/*
++ * Because of the wide memory address space between physical RAM banks on the
++ * SA1100, it's much more convenient to use Linux's NUMA support to implement
++ * our memory map representation. Assuming all memory nodes have equal access
++ * characteristics, we then have generic discontiguous memory support.
++ *
++ * Of course, all this isn't mandatory for SA1100 implementations with only
++ * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
++ *
++ * The nodes are matched with the physical memory bank addresses which are
++ * incidentally the same as virtual addresses.
++ *
++ * node 0: 0xc0000000 - 0xc7ffffff
++ * node 1: 0xc8000000 - 0xcfffffff
++ * node 2: 0xd0000000 - 0xd7ffffff
++ * node 3: 0xd8000000 - 0xdfffffff
++ */
++
++#define NR_NODES 4
++
++/*
++ * Given a kernel address, find the home node of the underlying memory.
++ */
++#define KVADDR_TO_NID(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> 27)
++
++/*
++ * Given a page frame number, convert it to a node id.
++ */
++#define PFN_TO_NID(pfn) (((pfn) - PHYS_PFN_OFFSET) >> (27 - PAGE_SHIFT))
++
++/*
++ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
++ * and returns the mem_map of that node.
++ */
++#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
++
++/*
++ * Given a page frame number, find the owning node of the memory
++ * and returns the mem_map of that node.
++ */
++#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
++
++/*
++ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
++ * and returns the index corresponding to the appropriate page in the
++ * node's mem_map.
++ */
++#define LOCAL_MAP_NR(addr) \
++ (((unsigned long)(addr) & 0x07ffffff) >> PAGE_SHIFT)
++
++#else
++
++#define PFN_TO_NID(addr) (0)
++
++#endif
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/param.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/param.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/param.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/param.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,21 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/param.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#define HZ 100
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/rcpc.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/rcpc.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/rcpc.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/rcpc.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,222 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/rcpc.h
++ *
++ * Copyright (C) 2001 Sharp Microelectronics of the Americas, Inc.
++ * Camas, WA
++ * Portions Copyright (C) 2002 Lineo, Inc.
++ *
++ * DDD
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++
++#ifndef RCPC_H
++#define RCPC_H
++
++/*
++ * RCPC: Reset, Clock, and Power Controller Register Structure
++ */
++typedef __attribute((packed)) struct {
++ u32 control; /* control register */
++ u32 id; /* identification */
++ u32 remap; /* Remap Control */
++ u32 softReset; /* Soft Reset */
++ u32 resetStatus; /* Reset Status */
++ u32 resetStatusclr; /* Reset Status Clear */
++ u32 HCLKPrescale; /* HCLK Prescaler */
++ u32 CpuClkPrescale; /* ARM Core Clk Prescaler */
++ u32 PCLKPrescale; /* PCLK Prescaler */
++ u32 periphClkCtrl; /* Peripheral Clock Ctrl */
++ u32 spareClkCtrl; /* Spare Clock Ctrl */
++ u32 AHBClkCtrl; /* AHB Clock Ctrl */
++ u32 periphClkSel; /* Peripheral Clock Select*/
++ u32 spareClkSel; /* Spare Clock Select */
++ u32 PWM0Prescale; /* PWM 0 Prescaler*/
++ u32 PWM1Prescale; /* PWM 1 Prescaler*/
++ u32 spare0Prescale; /* Spare clock 0 Prescaler*/
++ u32 spare1Prescale; /* Spare clock 1 Prescaler*/
++ u32 spare2Prescale; /* Spare clock 2 Prescaler*/
++ u32 spare3Prescale; /* Spare clock 3 Prescaler*/
++ u32 spare4Prescale; /* Spare clock 4 Prescaler*/
++ u32 spare5Prescale; /* Spare clock 5 Prescaler*/
++ u32 spare6Prescale; /* Spare clock 6 Prescaler*/
++ u32 spare7Prescale; /* Spare clock 7 Prescaler*/
++ u32 spare8Prescale; /* Spare clock 8 Prescaler*/
++ u32 spare9Prescale; /* Spare clock 9 Prescaler*/
++ u32 spare10Prescale; /* Spare clck 10 Prescaler*/
++ u32 spare11Prescale; /* Spare clck 11 Prescaler*/
++ u32 spare12Prescale; /* Spare clck 12 Prescaler*/
++ u32 spare13Prescale; /* Spare clck 13 Prescaler*/
++ u32 spare14Prescale; /* Spare clck 14 Prescaler*/
++ u32 spare15Prescale; /* Spare clck 15 Prescaler*/
++ u32 intConfig; /* Ext. Interrupt Config */
++ u32 intClear; /* Ext. Interrupt Clear */
++ u32 coreClkConfig; /* ARM Core Clock Config */
++} rcpcRegs_t;
++
++
++/*
++ * RCPC Bit Fields
++ */
++
++/*
++ * control Register Bit Fields
++ */
++#define RCPC_CTRL_EP _BIT(0) /* Enable PLL */
++#define RCPC_CTRL_EX _BIT(1) /* Enable Internal XTAL */
++
++#define RCPC_CTRL_PWRDWNSEL(n) _SBF(2,(n)) /* Power Down Mode Sel*/
++/* Mode Arguments to RCPC_CTRL_PWRDWNSEL(n) */
++#define PWRDWNSEL_ACTIVE 0
++#define PWRDWNSEL_STANDBY 1
++#define PWRDWNSEL_SLEEP 2
++#define PWRDWNSEL_STOP1 3
++#define PWRDWNSEL_STOP2 4
++
++#define RCPC_CTRL_OUTSEL(n) _SBF(5,(n))
++/* Arguments to RCPC_CTRL_OUTSEL(n) */
++#define OUTSEL_CLK_INTOSC 0
++#define OUTSEL_CLK_PLL 1
++#define OUTSEL_FCLK_CPU 2
++#define OUTSEL_HCLK 3
++
++#define RCPC_CTRL_CLKSEL_PLL _SBF(7,0)
++#define RCPC_CTRL_CLKSEL_EXT _SBF(7,1)
++
++#define RCPC_CTRL_WRTLOCK_LOCKED _SBF(9,0)
++#define RCPC_CTRL_WRTLOCK_ENABLED _SBF(9,1)
++
++/**********************************************************************
++ * identification - Identification Register Bit Fields
++ *********************************************************************/
++#define RCPC_ID_DEFAULT (0x5200)
++
++/**********************************************************************
++ * remap - Remap Control Register Bit Fields
++ *********************************************************************/
++#define RCPC_REMAP_SMEM0 (0)
++#define RCPC_REMAP_SDMEM0 (1)
++#define RCPC_REMAP_IMEM0 (2)
++
++/**********************************************************************
++ * softreset - Soft Reset Register Bit Fields
++ *********************************************************************/
++#define RCPC_SOFTRESET_ALL (0xDEAD)
++#define RCPC_SOFTRESET_GBL (0xDEAC)
++
++/**********************************************************************
++ * resetstatus, resetstatusclr - Reset Status Register Bit Fields
++ *********************************************************************/
++#define RCPC_RESET_STATUS_EXT _BIT(0)
++#define RCPC_RESET_STATUS_WDTO _BIT(1)
++
++/**********************************************************************
++ * hclkPrescale - HCLK Prescaler Register Bit Fields
++ * cpuclkPrescale - ARM Core Clock Prescaler Register Bit Fields
++ * pclkPrescale - PCLK Prescaler Register Bit Fields
++ * pwm0Prescale - PWM0 Prescaler Register Bit Fields
++ * pwm1Prescale - PWM1 Prescaler Register Bit Fields
++ * sparePrescale - Spare Prescaler Register Bit Fields
++ * Note: not all constants are applicable to all registers.
++ * See Reference.
++ *********************************************************************/
++#define RCPC_PRESCALER_DIV1 _SBF(0,0)
++#define RCPC_PRESCALER_DIV2 _SBF(0,1)
++#define RCPC_PRESCALER_DIV4 _SBF(0,2)
++#define RCPC_PRESCALER_DIV6 _SBF(0,3)
++#define RCPC_PRESCALER_DIV8 _SBF(0,4)
++#define RCPC_PRESCALER_DIV16 _SBF(0,8)
++#define RCPC_PRESCALER_DIV30 _SBF(0,15)
++#define RCPC_PRESCALER_DIV32 _SBF(0,16)
++#define RCPC_PRESCALER_DIV64 _SBF(0,32)
++#define RCPC_PRESCALER_DIV128 _SBF(0,64)
++#define RCPC_PRESCALER_DIV256 _SBF(0,128)
++#define RCPC_PRESCALER_DIV65534 (0xFFFF)
++
++/**********************************************************************
++ * periphclkctrl - Peripheral Clock Control Register Bit Fields
++ * spareclkctrl - Spare Clock Control Register Bit Fields
++ * ahbclkctrl - AHB Clock Control Register Bit Fields
++ * Writing a "0" to a bit in these registers enables the
++ * corresponding clock
++ *********************************************************************/
++#define RCPC_CLKCTRL_U0_DISABLE _BIT(0)
++#define RCPC_CLKCTRL_U1_DISABLE _BIT(1)
++#define RCPC_CLKCTRL_U2_DISABLE _BIT(2)
++#define RCPC_CLKCTRL_CT0_DISABLE _BIT(3)
++#define RCPC_CLKCTRL_CT1_DISABLE _BIT(4)
++#define RCPC_CLKCTRL_CT2_DISABLE _BIT(5)
++#define RCPC_CLKCTRL_CT3_DISABLE _BIT(6)
++#define RCPC_CLKCTRL_PWM0_DISABLE _BIT(7)
++#define RCPC_CLKCTRL_PWM1_DISABLE _BIT(8)
++#define RCPC_CLKCTRL_RTC_DISABLE _BIT(9)
++#define RCPC_CLKCTRL_SPARE_DISABLE(f) _BIT(f)
++
++#define RCPC_SPARE_CLKCTRL_SSPCLK_DISABLE _BIT(1)
++#define RCPC_SPARE_CLKCTRL_LCDCLK_DISABLE _BIT(0)
++
++#define RCPC_CLKCTRL_DMAC_DISABLE _BIT(0)
++#define RCPC_CLKCTRL_HCLKSP0_DISABLE _BIT(1)
++
++/**********************************************************************
++ * periphclksel - Peripheral Clock Select Register Bit Fields
++ * Writing a "0" to U0-U2 in this register enables the
++ * XTAL Oscillator as the clock source
++ * Writing a "0" to CT0-CT3 in this register enables the
++ * HCLK as the clock source
++ *********************************************************************/
++#define RCPC_PCLKSEL_U0_EXT _BIT(0) /* U0 Clock Source */
++#define RCPC_PCLKSEL_U1_EXT _BIT(1) /* U1 Clock Source */
++#define RCPC_PCLKSEL_U2_EXT _BIT(2) /* U2 Clock Source */
++#define RCPC_PCLKSEL_CT0_EXT _BIT(3) /* CT0 Clock Source */
++#define RCPC_PCLKSEL_CT1_EXT _BIT(4) /* CT1 Clock Source */
++#define RCPC_PCLKSEL_CT2_EXT _BIT(5) /* CT2 Clock Source */
++#define RCPC_PCLKSEL_CT3_EXT _BIT(6) /* CT3 Clock Source */
++#define RCPC_PCLKSEL_RTC_32 0 /* RTC Clock Source 32KHz */
++#define RCPC_PCLKSEL_RTC_EXT _SBF(7,2) /* RTC Clock Source Ext */
++
++/**********************************************************************
++ * spareclksel - Peripheral Clock Select Register Bit Fields
++ * Writing a "0" to a bit in this register enables the
++ * HCLK as the clock source
++ *********************************************************************/
++#define RCPC_SCLKSEL_SP(n) _SBF((n),1) /* SP2 - SP15 */
++#define RCPC_SCLKSEL_SSPCLK _BIT(1) /* SSP Clock External */
++#define RCPC_SCLKSEL_LCDCLK _BIT(0) /* LCD Clock External */
++
++/**********************************************************************
++ * intconfig - External Interrupt Configuration Register Bit Fields
++ *********************************************************************/
++#define RCPC_INTCONFIG(f,v) _SBF((f),(v))
++/* RCPC_INTCONFIG arguments for 'f' parameter */
++#define RCPC_INT0 0
++#define RCPC_INT1 2
++#define RCPC_INT2 4
++#define RCPC_INT3 6
++#define RCPC_INT4 8
++#define RCPC_INT5 10
++#define RCPC_INT6 12
++#define RCPC_INT7 14
++/* RCPC_INTCONFIG arguments for 'v' parameter */
++#define RCPC_INT_LLT 0 /* Low Level Trigger */
++#define RCPC_INT_HLT 1 /* High Level Trigger */
++#define RCPC_INT_FET 2 /* Falling Edge Trigger */
++#define RCPC_INT_RET 3 /* Rising Edge Trigger */
++
++/**********************************************************************
++ * intclear - External Interrupt Clear Register Bit Fields
++ *********************************************************************/
++#define RCPC_INTCLEAR(n) _BIT(n) /* Clear Edge Interrupt 'n' */
++
++/**********************************************************************
++ * coreclkconfig - Core Clock Configuration Register Bit Fields
++ *********************************************************************/
++#define RCPC_CCC_STDASYNCH 0 /* Standard Mode, Asynch operation */
++#define RCPC_CCC_FASTBUS 1 /* Fast Bus Extension Mode */
++#define RCPC_CCC_STDSYNCH 2 /* Standard Mode, Synch operation */
++
++#endif // RCPC_H
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/serial.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/serial.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/serial.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/serial.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,34 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/serial.h
++ *
++ * Copyright (c) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_ARCH_SERIAL_H
++#define __ASM_ARCH_SERIAL_H
++
++/*
++ * This assumes you have a 14.7456 MHz clock for your UART.
++ */
++#define BASE_BAUD (14745600 / 16)
++
++/*
++ * Standard COM flags
++ */
++#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
++
++#define RS_TABLE_SIZE 2
++
++#define STD_SERIAL_PORT_DEFNS \
++ /* MAGIC UART CLK PORT IRQ FLAGS */ \
++ { 0, BASE_BAUD, UART0_BASE, IRQ_UART0, STD_COM_FLAGS }, /* ttyAM0 */ \
++ { 0, BASE_BAUD, UART1_BASE, IRQ_UART1, STD_COM_FLAGS }, /* ttyAM0 */ \
++ { 0, BASE_BAUD, UART2_BASE, IRQ_UART2, STD_COM_FLAGS }, /* ttyAM1 */ \
++
++#define EXTRA_SERIAL_PORT_DEFNS
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/smc_pl090.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/smc_pl090.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/smc_pl090.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/smc_pl090.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,68 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/smc_pl090.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *
++ * This file contains the structure definitions and manifest
++ * constants for ARM IP component:
++ * Static Memory Controller PrimeCell PL090
++ *
++ * References:
++ * (1) ARM PrimeCell Static Memory Controller (PL090)
++ * Technical Reference Manual, ARM DDI 0160C.
++ * (2) ARM Isis Technical Reference Manual, System on Chip Group,
++ * ARM SC063-TRM-0001-B
++ *
++ * COPYRIGHT (C) 2001 SHARP MICROELECTRONICS OF THE AMERICAS, INC.
++ * CAMAS, WA
++ */
++
++#ifndef SMC_PL090_H
++#define SMC_PL090_H
++
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++
++/*
++ * Static Memory Controller Module Register Structure
++ */
++typedef struct {
++ volatile unsigned int bcr0; /* Configuration for bank 0 */
++ volatile unsigned int bcr1; /* Configuration for bank 1 */
++ volatile unsigned int bcr2; /* Configuration for bank 2 */
++ volatile unsigned int bcr3; /* Configuration for bank 3 */
++ volatile unsigned int bcr4; /* Configuration for bank 4 */
++ volatile unsigned int bcr5; /* Configuration for bank 5 */
++ volatile unsigned int bcr6; /* Configuration for bank 6 */
++ volatile unsigned int bcr7; /* Configuration for bank 7 */
++} smcRegs_t;
++
++/*
++ * Static Memory Controller Bit Field constants
++ */
++#define IDCY(n) _SBF(0,((n)&0x0F)) /* Idle Cycle Time */
++#define WST1(n) _SBF(5,((n)&0x1F)) /* Wait State 1 */
++#define RBLE(n) _SBF(10,((n)&0x01)) /* Read Byte Lane Enable */
++#define WST2(n) _SBF(11,((n)&0x1F)) /* Wait State 2 */
++#define BUSERR _BIT(24) /* Bus Transfer Error Flag */
++#define WPERR _BIT(25) /* Write Protect Error Flag */
++#define WP _BIT(26) /* Write Protect */
++#define BM _BIT(27) /* Burst Mode */
++#define MW8 _SBF(28,0) /* Memory width 8 bits */
++#define MW16 _SBF(28,1) /* Memory width 16 bits */
++#define MW32 _SBF(28,2) /* Memory width 32 bits */
++#define ATNONE _SBF(30,0) /* No Retry */
++#define ATEVERY _SBF(30,2) /* Retry after every access */
++#define ATAFTER4 _SBF(30,3) /* Retry after 4 accesses */
++
++#endif /* SMC_PL090_H */
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/ssp_lh7x.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/ssp_lh7x.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/ssp_lh7x.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/ssp_lh7x.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,159 @@
++/* vi: set sw=4 ts=4 ai: */
++
++/**********************************************************************
++* linux/include/asm-arm/arch-lh79520/ssp_lh7x.h
++*
++* Provide SSP (Synchronous Serial Port) types & definitions
++* for LH7x EVB boards
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++#ifndef _SSP_LH7X_h
++#define _SSP_LH7X_h
++
++//#define SSP_BASE SSP_PHYS
++
++/*********************************************************************
++* Synchronous Serial Port Registers
++*********************************************************************/
++#define SSPCR0 (SSP_BASE+0x00) /* Control reg. 0 */
++#define SSPCR1 (SSP_BASE+0x04) /* Control reg. 1 */
++#define SSPDR (SSP_BASE+0x08) /* Receive FIFO (Read)*/
++ /* Transmit FIFO data reg. (Write)*/
++#define SSPSR (SSP_BASE+0x0C) /* Status Reg. */
++#define SSPCPSR (SSP_BASE+0x10) /* Clock prescale reg. */
++#define SSPIIR (SSP_BASE+0x14) /* Interrupt identification reg. (Read) */
++#define SSPICR SSPIIR /* Interrupt clear reg. (Write) */
++/*
++* RESERVED:
++* 0x18 - 0x3C
++* 0x40 - 0x90 (For test purposes)
++* 0x94 - 0xFF
++*/
++
++/*********************************************************************
++* Synchronous Serial Port Register Structure
++*********************************************************************/
++typedef struct {
++ volatile unsigned int cr0;
++ volatile unsigned int cr1;
++ volatile unsigned int dr;
++ volatile unsigned int sr;
++ volatile unsigned int cpsr;
++ union {
++ volatile unsigned int iir;
++ volatile unsigned int icr;
++ } u;
++ volatile unsigned int reservedssp[58];
++} sspRegs_t;
++
++/*
++* To use the structure, declare the following in your source
++* static sspRegs_t *ssp = (sspRegs_t *)SSP_BASE;
++*/
++
++/*********************************************************************
++* A couple of macros we use here...
++*********************************************************************/
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++#ifndef _BITMASK
++#define _BITMASK(field_width) ( _BIT(field_width) - 1)
++#endif
++
++/*********************************************************************
++* Synchronous Serial Port Bit Fields
++*********************************************************************/
++
++/*********************************************************************
++* Control 0 Register Bit Fields
++*********************************************************************/
++/* Valid range for argument to SSP_CR0_DSS(n) is [4-16] */
++#define SSP_CR0_DSS(n) _SBF(0,(n)-1) /* Data Size Select */
++#define SSP_CR0_FRF_MOT _SBF(4,0) /* Motorola SPI frame */
++#define SSP_CR0_FRF_TI _SBF(4,1) /* TI synchronous serial frame */
++#define SSP_CR0_FRF_NS _SBF(4,2) /* National Microwire frame */
++#define SSP_CR0_SPO _BIT(6) /* SPI Polarity */
++#define SSP_CR0_SPH _BIT(7) /* SPI Polarity */
++#define SSP_CR0_SCR(n) _SBF(8,(n)) /* Serial Clock Rate */
++
++/*********************************************************************
++* Control 1 Register Bit Fields
++*********************************************************************/
++#define SSP_CR1_RIE _BIT(0) /* RX FIFO interrupt enable */
++#define SSP_CR1_TIE _BIT(1) /* TX FIFO interrupt enable */
++#define SSP_CR1_RORIE _BIT(2) /* RX FIFO overrun int. enable */
++#define SSP_CR1_LBM _BIT(3) /* Loop back mode */
++#define SSP_CR1_SSE _BIT(4) /* Synchronous serial port enable */
++
++/*********************************************************************
++* Status Register Bit Fields
++*********************************************************************/
++#define SSP_SR_TFE _BIT(0) /* TX FIFO Empty */
++#define SSP_SR_TNF _BIT(1) /* TX FIFO not full */
++#define SSP_SR_RNE _BIT(2) /* RX FIFO not empty */
++#define SSP_SR_RFF _BIT(3) /* RX FIFO full */
++#define SSP_SR_BSY _BIT(4) /* Busy flag */
++
++/*********************************************************************
++* Clock Prescale Divisor Register Bit Fields
++*********************************************************************/
++#define SSP_CPSR_CPDVSR(n) _SBF(0,(n)&0xFE) /* Clock prescale divisor */
++
++/*********************************************************************
++* Interrupt Identification / Interrupt Clear Register Bit Fields
++* Note: ARM Reference conflicts on the definition of these bits
++* and the usage of the registers. Verify before using these
++* definitions.
++*********************************************************************/
++#define SSP_IIR_RIS _BIT(0) /* TX FIFO Empty */
++#define SSP_IIR_TIS _BIT(1) /* TX FIFO not full */
++#define SSP_IIR_RORIS _BIT(2) /* RX FIFO overrun int. status */
++
++/*********************************************************************
++* The TouchScreen communication BPS (bits per second)
++*********************************************************************/
++#define LH7x_TS_BPS 100000
++
++/*********************************************************************
++* Misc.
++*********************************************************************/
++#define SSP_MAX_TIMEOUT 0xffff
++#define RCPC_SSP_PRESCALE_MAX 256
++#define SSP_PRESCALE_MAX 254
++#define SSP_PRESCALE_MIN 2
++#define SSP_DIVIDER_MAX 256
++
++/* Define values to associate with the device we are conencted to */
++#define SSP_INVALID_DEVICE 0xFF
++#define SSP_EEPROM 0x00
++#define SSP_TOUCHSCREEN 0x01
++
++/*********************************************************************
++* Context Structure Definition
++*********************************************************************/
++typedef struct sspContext_t sspContext_t;
++struct sspContext_t {
++ wait_queue_head_t *irq_wait_ptr;
++ int irq_state;
++ int ssp_dev_sel; // cpld->ssp_dev_sel is not readable !!!
++ int ts_txTimeout;
++ int ts_rxTimeout;
++ int ee_txTimeout;
++ int ee_rxTimeout;
++ int haveIrq;
++ spinlock_t sspLock;
++};
++
++#endif /* _SSP_LH7X_h */
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/system.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/system.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/system.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/system.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,28 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/system.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Changelog:
++ * 07-Jan-2001 Duck Created
++ */
++
++#ifndef __ASM_ARCH_SYSTEM_H
++#define __ASM_ARCH_SYSTEM_H
++
++static inline void
++arch_idle(void)
++{
++}
++
++static inline void
++arch_reset(char mode)
++{
++ cpu_reset(0);
++}
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/time.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/time.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/time.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/time.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,111 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/time.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Changelog:
++ * 07-Jan-2002 Duck Created
++ */
++
++#ifndef __ASM_ARCH_TIME_H
++#define __ASM_ARCH_TIME_H
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/rcpc.h>
++
++/*
++ * Dual Timer Module Register Structure
++ * The LH79520 has two of these.
++ */
++typedef struct {
++ unsigned int Timer1Load;
++ unsigned int Timer1Value;
++ unsigned int Timer1Control;
++ unsigned int Timer1Clear;
++ unsigned int Timer1Test;
++ unsigned int reservedtmr1[3];
++ unsigned int Timer2Load;
++ unsigned int Timer2Value;
++ unsigned int Timer2Control;
++ unsigned int Timer2Clear;
++ unsigned int Timer2Test;
++ unsigned int reservedtmr2[3];
++} timerRegs_t;
++
++
++/*
++ * Timer Control Register Bit Field constants
++ * All other bits in the Timer Control Register must be written as
++ * zero
++ */
++#define TMRCTRL_ENABLE _SBF(7,1)
++#define TMRCTRL_DISABLE _SBF(7,0)
++#define TMRCTRL_MODE_PERIODIC _SBF(6,1)
++#define TMRCTRL_MODE_FREERUN _SBF(6,0)
++#define TMRCTRL_CASCADE_ENABLE _SBF(4,1)
++#define TMRCTRL_CASCADE_DISABLE _SBF(4,0)
++#define TMRCTRL_PRESCALE1 _SBF(2,0)
++#define TMRCTRL_PRESCALE16 _SBF(2,1)
++#define TMRCTRL_PRESCALE256 _SBF(2,2)
++
++/*
++ * what to load the timer with
++ * it's 14.745600 MHz * 21 (PLL multiplier) / 6 (PCLK prescalar) / 16 (TIMER_PRESCALE) / HZ
++ * this gives us timerLoad=32256 for Hz=100
++ */
++#define TIMER_PRESCALE 16
++
++static void
++timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++ timerRegs_t *mod1Timer = (timerRegs_t *)IO_ADDRESS( TIMER0_PHYS);
++
++ mod1Timer->Timer1Clear = 1; /* clear interrupt */
++
++ do_timer(regs);
++}
++
++
++static inline void
++setup_timer(void)
++{
++ rcpcRegs_t *rcpc = (rcpcRegs_t *)IO_ADDRESS( RCPC_PHYS);
++ timerRegs_t *mod1Timer = (timerRegs_t *)IO_ADDRESS( TIMER0_PHYS), /* first timer module */
++ *mod2Timer = (timerRegs_t *)IO_ADDRESS( TIMER1_PHYS); /* second timer module */
++ u32 timerLoad;
++
++ timerLoad = hclkfreq_get() / TIMER_PRESCALE / HZ;
++ printk( "setup_timer(): timerLoad=%d\n", timerLoad);
++
++ /* stop all timers */
++ mod1Timer->Timer1Control = 0;
++ mod1Timer->Timer2Control = 0;
++ mod2Timer->Timer1Control = 0;
++ mod2Timer->Timer2Control = 0;
++
++ /* enable clock to first timer */
++ rcpc->control |= RCPC_CTRL_WRTLOCK_ENABLED; /* unlock RCPC registers */
++ barrier();
++
++ rcpc->periphClkCtrl &= ~RCPC_CLKCTRL_CT0_DISABLE;
++ rcpc->control &= ~RCPC_CTRL_WRTLOCK_ENABLED; /* lock RCPC registers */
++
++ /* setup the FRC in the first timer in the first module. */
++ mod1Timer->Timer1Load = timerLoad;
++
++ mod1Timer->Timer1Control = TMRCTRL_ENABLE |
++ TMRCTRL_MODE_PERIODIC |
++ TMRCTRL_PRESCALE16;
++
++
++
++ timer_irq.handler = timer_interrupt;
++ timer_irq.flags = SA_INTERRUPT;
++ setup_arm_irq( IRQ_TIMER0, &timer_irq);
++}
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/timex.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/timex.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/timex.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/timex.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,16 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/timex.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++/*
++ * On the LH79520, the DDD
++ */
++#define CLOCK_TICK_RATE (PLL_CLOCK / 6 / 16)
++
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/uncompress.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/uncompress.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/uncompress.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/uncompress.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,52 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/uncompress.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#define UART_DR (*(volatile unsigned char *)0xfffc1000)
++#define UART_FR (*(volatile unsigned short *)0xfffc1018)
++
++#define UARTFR_TXFE 0x80
++
++/*
++ * This does not append a newline
++ */
++static void
++puts( const char *s)
++{
++ while( *s) {
++ while( (UART_FR & UARTFR_TXFE) == 0) /* wait for room in the tx FIFO */
++ ;
++
++ UART_DR = *s; /* ship a char */
++
++ if (*s == '\n') { /* it's a new line */
++ while( (UART_FR & UARTFR_TXFE) == 0) /* wait for room in the tx FIFO */
++ ;
++
++ UART_DR = '\r'; /* ship a carriage return */
++ }
++ s++;
++ }
++}
++
++/*
++ * nothing to do
++ */
++#define arch_decomp_setup()
++#define arch_decomp_wdog()
+diff -urN linux-2.4.26/include/asm-arm/arch-lh79520/vmalloc.h linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/vmalloc.h
+--- linux-2.4.26/include/asm-arm/arch-lh79520/vmalloc.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/arch-lh79520/vmalloc.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,32 @@
++/*
++ * linux/include/asm-arm/arch-lh79520/vmalloc.h
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++/*
++ * Just any arbitrary offset to the start of the vmalloc VM area: the
++ * current 8MB value just means that there will be a 8MB "hole" after the
++ * physical memory until the kernel virtual memory starts. That means that
++ * any out-of-bounds memory accesses will hopefully be caught.
++ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
++ * area for the same reason. ;)
++ */
++#define VMALLOC_OFFSET (8*1024*1024)
++#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
++#define VMALLOC_VMADDR(x) ((unsigned long)(x))
++#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+diff -urN linux-2.4.26/include/asm-arm/hardware/cradle.h linux-2.4.26-vrs1-lnode80/include/asm-arm/hardware/cradle.h
+--- linux-2.4.26/include/asm-arm/hardware/cradle.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/hardware/cradle.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,14 @@
++/*
++ * cradle.h
++ */
++#ifndef _INCLUDE_CRADLE_H_
++#define _INCLUDE_CRADLE_H_
++
++#define CRADLE_MAJOR 254
++
++#define CRADLE_GET_DOCKING_STATE_IOCTL 0
++
++#define CRADLE_DOCKED_STATE 0
++#define CRADLE_UNDOCKED_STATE 1
++
++#endif
+diff -urN linux-2.4.26/include/asm-arm/hardware/lcd_contrast.h linux-2.4.26-vrs1-lnode80/include/asm-arm/hardware/lcd_contrast.h
+--- linux-2.4.26/include/asm-arm/hardware/lcd_contrast.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/hardware/lcd_contrast.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,30 @@
++/*
++ lcd_contrast.h
++
++
++These values are intended to be passed to the
++pl110fb lcd driver. The driver was modified to control
++a Maxim contrast controller to make life easy.
++
++*/
++
++
++#ifndef _LCD_CONTRAST_
++#define _LCD_CONTRAST_
++
++
++//ioctls
++#define LCD_CONTRAST_RESET 0
++#define LCD_CONTRAST_INC 1
++#define LCD_CONTRAST_DEC 2
++
++#define LCD_CONTRAST_PRESET 3
++// above takes parameters (0 - 63)
++// 0 - reset
++// 31 - highest
++// 63 - lowest
++
++
++#endif //__LCD_CONTRAST__
++
++
+diff -urN linux-2.4.26/include/asm-arm/hardware/serial_amba_pl011.h linux-2.4.26-vrs1-lnode80/include/asm-arm/hardware/serial_amba_pl011.h
+--- linux-2.4.26/include/asm-arm/hardware/serial_amba_pl011.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/asm-arm/hardware/serial_amba_pl011.h 2005-11-02 17:37:32.000000000 -0400
+@@ -0,0 +1,114 @@
++/*
++ * linux/include/asm-arm/hardware/serial_amba_pl011.h
++ *
++ * Internal header file for AMBA PrimeCell PL011 serial ports
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * Based on serial_amba.h, which is:
++ * Copyright (C) ARM Limited
++ * Copyright (C) 2000 Deep Blue Solutions Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_PL011_H
++#define ASM_ARM_HARDWARE_SERIAL_AMBA_PL011_H
++
++/* -------------------------------------------------------------------------------
++ * From AMBA UART (PL011) TRM
++ * -------------------------------------------------------------------------------
++ * UART Register Offsets.
++ */
++#define AMBA_UARTDR 0x00 /* Data read or written from the interface. */
++#define AMBA_UARTRSR 0x04 /* Receive status register (Read). */
++#define AMBA_UARTECR 0x04 /* Error clear register (Write). */
++
++
++#define AMBA_UARTFR 0x18 /* Flag register (Read only). */
++#define AMBA_UARTILPR 0x20 /* IrDA low power counter register. */
++#define AMBA_UARTIBRD 0x24 /* Integer baud rate divisor. */
++#define AMBA_UARTFBRD 0x28 /* Fractional baud rate divisor. */
++#define AMBA_UARTLCR_H 0x2C /* Line control register, high byte. */
++#define AMBA_UARTCR 0x30 /* Control register. */
++#define AMBA_UARTIFLS 0x34 /* Interrupt FIFO level select. */
++#define AMBA_UARTIMSC 0x38 /* Interrupt Mask Set/Clear. */
++#define AMBA_UARTRIS 0x3C /* Raw Interrupt status register (Read). */
++#define AMBA_UARTMIS 0x40 /* Masked Interrupt status register (Read). */
++#define AMBA_UARTICR 0x44 /* Interrupt clear register (Write). */
++
++#define AMBA_UARTRSR_OE 0x0800 /* Overrun error */
++#define AMBA_UARTRSR_BE 0x0400 /* Break error */
++#define AMBA_UARTRSR_PE 0x0200 /* Parity error */
++#define AMBA_UARTRSR_FE 0x0100 /* framing error */
++
++#define AMBA_UARTFR_TXFF 0x20 /* Tx FIFO full */
++#define AMBA_UARTFR_RXFE 0x10 /* Rx FIFO empty */
++#define AMBA_UARTFR_BUSY 0x08 /* busy xmitting */
++#define AMBA_UARTFR_DCD 0x04
++#define AMBA_UARTFR_DSR 0x02
++#define AMBA_UARTFR_CTS 0x01
++#define AMBA_UARTFR_TMSK (AMBA_UARTFR_TXFF + AMBA_UARTFR_BUSY)
++
++/* Interrupt Mask Set/Clear register bits */
++#define AMBA_UARTIMSC_RTIM 0x40 /* Rx timeout interrupt mask */
++#define AMBA_UARTIMSC_TXIM 0x20 /* Tx interrupt mask */
++#define AMBA_UARTIMSC_RXIM 0x10 /* Rx interrupt mask */
++#define AMBA_UARTIMSC_DSRMIM 0x08 /* DSR Modem Interrupt mask */
++#define AMBA_UARTIMSC_DCDMIM 0x04 /* DCD Modem Interrupt mask */
++#define AMBA_UARTIMSC_CTSMIM 0x02 /* CTS Modem Interrupt mask */
++#define AMBA_UARTIMSC_RIMIM 0x01 /* RI Modem Interrupt mask */
++/* all modem mask bits */
++#define AMBA_UARTIMSC_Modem (AMBA_UARTIMSC_DSRMIM |AMBA_UARTIMSC_DCDMIM | \
++ AMBA_UARTIMSC_CTSMIM |AMBA_UARTIMSC_RIMIM)
++
++
++
++/* Control Register bits */
++
++#define AMBA_UARTCR_RTS 0x800 /* nRTS */
++#define AMBA_UARTCR_DTR 0x400 /* nDTR */
++#define AMBA_UARTCR_RXE 0x200 /* Rx enable */
++#define AMBA_UARTCR_TXE 0x100 /* Tx enable */
++#define AMBA_UARTCR_LBE 0x080 /* Loopback enable */
++#define AMBA_UARTCR_SIRLP 0x004 /* IR SIR Low Power Mode */
++#define AMBA_UARTCR_SIREN 0x002 /* IR SIR enable */
++#define AMBA_UARTCR_UARTEN 0x001 /* UART enable */
++
++#define AMBA_UARTLCR_H_WLEN_8 0x60
++#define AMBA_UARTLCR_H_WLEN_7 0x40
++#define AMBA_UARTLCR_H_WLEN_6 0x20
++#define AMBA_UARTLCR_H_WLEN_5 0x00
++#define AMBA_UARTLCR_H_FEN 0x10
++#define AMBA_UARTLCR_H_STP2 0x08
++#define AMBA_UARTLCR_H_EPS 0x04
++#define AMBA_UARTLCR_H_PEN 0x02
++#define AMBA_UARTLCR_H_BRK 0x01
++
++/* Raw/Masked Interrupt Status Register bits*/
++#define AMBA_UART_IS_RT 0x40
++#define AMBA_UART_IS_TX 0x20
++#define AMBA_UART_IS_RX 0x10
++#define AMBA_UART_IS_DSR 0x08
++#define AMBA_UART_IS_DCD 0x04
++#define AMBA_UART_IS_CTS 0x02
++#define AMBA_UART_IS_RI 0x01
++#define AMBA_UART_IS_MI (AMBA_UART_IS_DSR | AMBA_UART_IS_DCD | \
++ AMBA_UART_IS_CTS | AMBA_UART_IS_RI )
++
++#define AMBA_UARTRSR_ANY (AMBA_UARTRSR_OE|AMBA_UARTRSR_BE|AMBA_UARTRSR_PE|AMBA_UARTRSR_FE)
++#define AMBA_UARTFR_MODEM_ANY (AMBA_UARTFR_DCD|AMBA_UARTFR_DSR|AMBA_UARTFR_CTS)
++
++#endif /* ASM_ARM_HARDWARE_SERIAL_AMBA_PL011_H */
++
+diff -urN linux-2.4.26/include/lh79520.h linux-2.4.26-vrs1-lnode80/include/lh79520.h
+--- linux-2.4.26/include/lh79520.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/lh79520.h 2005-11-02 17:37:33.000000000 -0400
+@@ -0,0 +1,340 @@
++/*
++ * lh79520.h: LH79520 specific defines
++ *
++ * Copyright (C) 2002 Lineo, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++
++#ifndef BLOB_ARCH_LH79520_H
++#define BLOB_ARCH_LH79520_H
++
++#ifndef _BIT
++#define _BIT(n) (1 << (n))
++#endif
++
++#ifndef _SBF
++#define _SBF(f,v) ((v) << (f))
++#endif
++
++/* the base address were BLOB is loaded by the first stage loader */
++// #define BLOB_ABS_BASE_ADDR (0x60000000) // for gdb bootstrap in SRAM
++#define BLOB_ABS_BASE_ADDR (0x20200400)
++
++
++/* where do various parts live in RAM */
++#define BLOB_RAM_BASE (0x20100000)
++#define KERNEL_RAM_BASE (0x20008000)
++#define PARAM_RAM_BASE (0x20110000)
++#define RAMDISK_RAM_BASE (0x20400000)
++#define RAMDISK_VIRTUAL_BASE (0xC0400000) // kernel virtual address of where ramdisk will be
++
++
++/* and where do they live in flash */
++#define BLOB_FLASH_BASE (0x00000000)
++#define BLOB_FLASH_LEN (128 * 1024) // 128 KB for blob
++
++#define PARAM_FLASH_BASE (BLOB_FLASH_BASE + BLOB_FLASH_LEN)
++#define PARAM_FLASH_LEN (64 * 1024) // 64 KB for params
++
++#define KERNEL_FLASH_BASE (PARAM_FLASH_BASE + PARAM_FLASH_LEN)
++#define KERNEL_FLASH_LEN (1024 * 1024 - \
++ (BLOB_FLASH_LEN + PARAM_FLASH_LEN)) // 1 MB - (BLOB + PARAM) for kernel
++
++#define RAMDISK_FLASH_BASE (KERNEL_FLASH_BASE + KERNEL_FLASH_LEN)
++#define RAMDISK_FLASH_LEN (3 * 1024 * 1024) // 3 MB for ramdisk
++
++#define PARAM_START PARAM_FLASH_BASE
++#define PARAM_LEN PARAM_FLASH_LEN
++
++/* the position of the kernel boot parameters */
++#define BOOT_PARAMS (0x20000100)
++
++
++/* the size (in kbytes) to which the compressed ramdisk expands */
++#define RAMDISK_SIZE (8 * 1024)
++
++
++/* Memory configuration */
++
++/**********************************************************************
++ * AHB BASES
++ *********************************************************************/
++#define AHB_PHYS (0xFFFF0000)
++#define VIC_PHYS_MIRROR (AHB_PHYS + 0x0000)
++#define SMC_REGS_BASE (AHB_PHYS + 0x1000)
++#define SDRAM_REGS_BASE (AHB_PHYS + 0x2000)
++#define LCD_BASE (AHB_PHYS + 0x4000)
++#define VIC_PHYS (AHB_PHYS + 0xF000)
++
++/**********************************************************************
++ * APB BASES
++ *********************************************************************/
++#define APB_PHYS (0xFFFC0000)
++#define UART0_BASE (APB_PHYS + 0x00000)
++#define UART1_BASE (APB_PHYS + 0x01000)
++#define UART2_BASE (APB_PHYS + 0x02000)
++#define PWM_BASE (APB_PHYS + 0x03000)
++#define TIMER0_BASE (APB_PHYS + 0x04000)
++#define TIMER1_BASE (APB_PHYS + 0x05000)
++#define SSP_BASE (APB_PHYS + 0x06000)
++#define GPIO3_BASE (APB_PHYS + 0x1C000)
++#define GPIO2_BASE (APB_PHYS + 0x1D000)
++#define GPIO1_BASE (APB_PHYS + 0x1E000)
++#define GPIO0_BASE (APB_PHYS + 0x1F000)
++#define RTC_BASE (APB_PHYS + 0x20000)
++#define DMAC_BASE (APB_PHYS + 0x21000)
++#define RCPC_BASE (APB_PHYS + 0x22000)
++#define WDTIMER_BASE (APB_PHYS + 0x23000)
++#define LCDICP_BASE (APB_PHYS + 0x24000)
++#define IOCON_BASE (APB_PHYS + 0x25000)
++
++#define SDRAM_MEM_BASE 0x20000000
++#define SMC_MEM_BASE (0x40000000)
++#define INTERNAL_MEM_BASE (0x60000000)
++
++
++/**********************************************************************
++ * SMC Memory Bank Address Space Bases
++ *********************************************************************/
++
++#define SMC_BANK0_BASE (SMC_MEM_BASE + 0x00000000)
++#define SMC_BANK1_BASE (SMC_MEM_BASE + 0x04000000)
++#define SMC_BANK2_BASE (SMC_MEM_BASE + 0x08000000)
++#define SMC_BANK3_BASE (SMC_MEM_BASE + 0x0C000000)
++#define SMC_BANK4_BASE (SMC_MEM_BASE + 0x10000000)
++#define SMC_BANK5_BASE (SMC_MEM_BASE + 0x14000000)
++#define SMC_BANK6_BASE (SMC_MEM_BASE + 0x18000000)
++#define SMC_BANK7_BASE (SMC_MEM_BASE + 0x1C000000)
++
++/* Flash ROM */
++#define FLASH_PHYS_BASE 0x00000000
++#define FLASH_PHYS_SIZE 0x00400000
++
++/**********************************************************************
++ * SDRAMC Memory Bank Address Space Bases
++ *********************************************************************/
++
++#define SDRAM_BANK0_BASE (SDRAM_MEM_BASE + 0x00000000)
++#define SDRAM_BANK1_BASE (SDRAM_MEM_BASE + 0x08000000)
++
++// WDT offsets
++#define WDT_WDCTLR_OFFSET 0x0
++
++// RCPC offsets for assembly files
++#define RCPC_CONTROL_OFFSET 0x00
++#define RCPC_REMAP_OFFSET 0x08
++#define RCPC_SOFTRESET_OFFSET 0x0C
++#define RCPC_RESETSTATUS_OFFSET 0x10
++#define RCPC_RESETSTATUS_CLEAR_OFFSET 0x14
++#define RCPC_HCLKCLK_PRESCALE_OFFSET 0x18
++#define RCPC_CPUCLK_PRESCALE_OFFSET 0x1C
++#define RCPC_PERIPHCLKCTRL_OFFSET 0x24
++#define RCPC_AHBCLKCTRL_OFFSET 0x2C
++#define RCPC_PERIPHCLKSELECT_OFFSET 0x30
++#define RCPC_CORECLKCONFIG_OFFSET 0x88
++
++#define RCPC_CPUCLK_PRESCALE_78 0x2
++#define RCPC_CPUCLK_PRESCALE_52 0x3
++#define RCPC_CPUCLK_PRESCALE_39 0x4
++#define RCPC_HCLK_PRESCALE_52 0x3
++#define RCPC_HCLK_PRESCALE_39 0x4
++#define RCPC_CPUCLK_PRESCALE_DEFAULT RCPC_CPUCLK_PRESCALE_52
++#define RCPC_HCLK_PRESCALE_DEFAULT RCPC_HCLK_PRESCALE_52
++//#define RCPC_CPUCLK_PRESCALE_DEFAULT RCPC_CPUCLK_PRESCALE_78
++//#define RCPC_HCLK_PRESCALE_DEFAULT RCPC_HCLK_PRESCALE_52
++
++/* IOCON offsets for assembly code */
++#define IOCON_MEMMUX_OFFSET 0x00
++//#define IOCON_MEMMUX_INIT 0x00003fff
++#define IOCON_MEMMUX_INIT 0x00000075
++#define IOCON_LCDMUX_OFFSET 0x04
++#define IOCON_LCDMUX_INIT 0x1f3db95d
++#define IOCON_MISCMUX_OFFSET 0x08
++#define IOCON_MISCMUX_INIT 0x0000005e
++#define IOCON_DMAMUX_OFFSET 0x0C
++#define IOCON_DMAMUX_INIT 0x00000000
++#define IOCON_UARTMUX_OFFSET 0x10
++#define IOCON_UARTMUX_INIT 0x0000000f
++#define IOCON_SSPMUX_OFFSET 0x14
++#define IOCON_SSPMUX_INIT 0x0000001c
++
++#if 0
++/* GPIO Configuration */
++#define GPIOB_DATA_OFFSET 0x000
++#define GPIOB_DATA_INIT 0x00000000
++#define GPIOB_DDR_OFFSET 0x008
++#define GPIOB_DDR_INIT 0x00000000
++#define GPIOF_DATA_OFFSET 0x000
++#define GPIOF_DATA_INIT 0x000000DA
++#define GPIOF_DDR_OFFSET 0x008
++#define GPIOF_DDR_INIT 0x000000FA
++#define GPIOG_DATA_OFFSET 0x000
++#define GPIOG_DATA_INIT 0x000000E0
++#define GPIOG_DDR_OFFSET 0x008
++#define GPIOG_DDR_INIT 0x000000E0
++#define GPIOH_DATA_OFFSET 0x004
++#define GPIOH_DATA_INIT 0x00000043
++#define GPIOH_DDR_OFFSET 0x00C
++#define GPIOH_DDR_INIT 0x00000043
++#endif
++
++#define GPIOB_DATA_OFFSET 0x004
++#define GPIOB_DATA_INIT 0x00000000
++#define GPIOB_DDR_OFFSET 0x00c
++#define GPIOB_DDR_INIT 0x00000000
++#define GPIOF_DATA_OFFSET 0x004
++#define GPIOF_DATA_INIT 0x00000008
++#define GPIOF_DDR_OFFSET 0x00C
++#define GPIOF_DDR_INIT 0x00000038
++#define GPIOG_DATA_OFFSET 0x000
++#define GPIOG_DATA_INIT 0x000000E0
++#define GPIOG_DDR_OFFSET 0x008
++#define GPIOG_DDR_INIT 0x000000E0
++#define GPIOH_DATA_OFFSET 0x004
++#define GPIOH_DATA_INIT 0x00000043
++#define GPIOH_DDR_OFFSET 0x00C
++#define GPIOH_DDR_INIT 0x00000043
++
++
++
++
++/* SDRAM controller offsets */
++#define SDRAM_CFG0_OFF 0
++#define SDRAM_CFG1_OFF 4
++#define SDRAM_REFTIMER_OFF 8
++
++#define SDRAM_INIT_NORMAL 0
++#define SDRAM_INIT_PALL 1
++#define SDRAM_INIT_MODE 2
++#define SDRAM_INIT_NOP 3
++#define SDRAM_BUSY 0x20 /* SDRAM Engine Status */
++
++
++/*
++ * Clock Indexes
++ * Caution: these indexes have to be coherent with the equivalent indexes
++ * included with associated 'C' modules
++ */
++
++#define RCPC_CLKIDX_DEFAULT 0
++#define RCPC_CLKIDX_39_39 1
++#define RCPC_CLKIDX_52_39 2
++#define RCPC_CLKIDX_52_52 3
++#define RCPC_CLKIDX_78_39 4
++#define RCPC_CLKIDX_78_52 5
++#define RCPC_CLKIDX_78_78 6
++#define RCPC_CLKIDX_10_10 7
++
++/*
++ * SDRAM Refresh timer values for various Clock Indexes
++ */
++#define REFTIMER_78 0x480
++#define REFTIMER_52 0x320
++#define REFTIMER_39 0x270
++#define REFTIMER_10 0x80
++
++
++/**********************************************************************
++ * Static Memory Controller (SMC)
++ *********************************************************************/
++#define SMC ((SMCREGS *)(SMC_REGS_BASE))
++
++/**********************************************************************
++ * SDRAM Controller (SDRAM)
++ *********************************************************************/
++#define SDRAM ((SDRAMREGS *)(SDRAM_REGS_BASE))
++
++/**********************************************************************
++ * Color LCD Controller (CLCDC)
++ *********************************************************************/
++#define CLCDC ((CLCDCREGS *)(LCD_BASE))
++
++/**********************************************************************
++ * UARTs
++ *********************************************************************/
++#define UARTID_OFFSET (0xFE0)
++#define UART0 ((UART *)(UART0_BASE))
++#define UART1 ((UART *)(UART1_BASE))
++#define UART2 ((UART *)(UART2_BASE))
++#define UART0ID ((UARTID *)(UART0_BASE + UARTID_OFFSET))
++#define UART1ID ((UARTID *)(UART1_BASE + UARTID_OFFSET))
++#define UART2ID ((UARTID *)(UART2_BASE + UARTID_OFFSET))
++
++/* use this serial port */
++#define UART ((UARTREGS *)(UART0_BASE))
++#define LH_UART_NUM 0
++
++
++/**********************************************************************
++ * TIMER
++ *********************************************************************/
++#define TIMER2_OFFSET (0x20)
++#define TIMER0 ((TIMERREG *)(TIMER0_BASE))
++#define TIMER1 ((volatile TIMERREG *)(TIMER0_BASE + TIMER2_OFFSET))
++#define TIMER2 ((TIMERREG *)(TIMER1_BASE))
++#define TIMER3 ((TIMERREG *)(TIMER1_BASE + TIMER2_OFFSET))
++
++/*
++ * base addresses of each dual timer module
++ */
++#define MOD1_TIMER ((TIMERREGS *) TIMER0_BASE)
++#define MOD2_TIMER ((TIMERREGS *) TIMER1_BASE)
++
++
++#define RCPC ((RCPCREGS *)(RCPC_BASE))
++#define LCDICP ((LCDICPREGS *)(LCDICP_BASE))
++#define IOCON ((IOCONREGS *)(IOCON_BASE))
++#define CPLD_PHYS_BASE SMC_BANK2_BASE
++#define CPLD ((CPLDREGS *)(CPLD_PHYS_BASE))
++
++#define _7seg(val) \
++ { \
++ CPLDREGS *cpld = CPLD; \
++ cpld->seven_seg = (val); \
++ }
++
++/*
++ * CPU board DIP switches
++ */
++#define DIPSW1 0x01
++#define DIPSW2 0x02
++#define DIPSW3 0x04
++#define DIPSW4 0x08
++#define DIPSW5 0x10
++#define DIPSW6 0x20
++#define DIPSW7 0x40
++#define DIPSW8 0x80
++
++/*
++ * CPU and BUS speeds, also tied to SDRAM speed
++ * NOTE: Don't change one without changing the others!!!!
++ */
++
++#if 0 // run the CPU at 52 MHz, and the bus at 52 MHz
++ #define CPU_CLK_PRESCALAR RCPC_CPUCLK_PRESCALE_52
++ #define SDRAM_REFTIMER REFTIMER_52
++ #define HCLK_PRESCALAR RCPC_HCLK_PRESCALE_52
++ #define CORE_CLK_CONFIG 3 /* FastBus */
++#else // run the CPU at 78 MHz, and the Bus at 52 MHz
++ #define CPU_CLK_PRESCALAR RCPC_CPUCLK_PRESCALE_78
++ #define SDRAM_REFTIMER 0x320 /*REFTIMER_78*/
++ #define HCLK_PRESCALAR RCPC_HCLK_PRESCALE_52
++ #define CORE_CLK_CONFIG 0 /* std mode, async */
++#endif
++
++
++#endif // BLOB_ARCH_LH79520_H
+diff -urN linux-2.4.26/include/linux/serial_core.h linux-2.4.26-vrs1-lnode80/include/linux/serial_core.h
+--- linux-2.4.26/include/linux/serial_core.h 2005-11-02 16:54:26.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/linux/serial_core.h 2005-11-02 17:46:47.000000000 -0400
+@@ -51,6 +51,8 @@
+ #define PORT_SA1100 34
+ #define PORT_UART00 35
+ #define PORT_21285 37
++#define PORT_AMBA_PL011 38
++#define PORT_LH7A400 39
+
+ /* Sparc type numbers. */
+ #define PORT_SUNZILOG 38
+diff -urN linux-2.4.26/include/linux/verbosedebug.h linux-2.4.26-vrs1-lnode80/include/linux/verbosedebug.h
+--- linux-2.4.26/include/linux/verbosedebug.h 1969-12-31 20:00:00.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/include/linux/verbosedebug.h 2005-11-02 17:37:33.000000000 -0400
+@@ -0,0 +1,51 @@
++/* vi: set sw=4 ts=4 ai: */
++
++/**********************************************************************
++* linux/include/linux/verbosedebug.h
++*
++* Provide Verbose, Debug, and Verbose+Debug printk macros that can be
++* enabled or disabled vi the definitions of DEBUG and VERBOSE.
++*
++* vprintk -- Verbose printk
++* dprintk -- Debug printk
++* vdprintk -- Verbose+Debug printk
++*
++* Copyright (C) 2002 Lineo, Inc.
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License (GPL) version 2
++* as published by the Free Software Foundation.
++*
++**********************************************************************/
++
++#ifndef _VerboseDebug_h
++#define _VerboseDebug_h
++
++#ifndef DRVNAME
++# define DRVNAME ""
++#endif
++
++#ifdef VERBOSE
++# ifdef DEBUG
++# define vprintk(fmt,args...) {printk(DRVNAME ": " fmt, ## args);}
++# define dprintk(fmt,args...) {printk(DRVNAME ": " fmt, ## args);}
++# define vdprintk(fmt,args...) {printk(DRVNAME ": " fmt, ## args);}
++# else
++# define vprintk(fmt,args...) {printk(DRVNAME ": " fmt, ## args);}
++# define dprintk(fmt,args...) {}
++# define vdprintk(fmt,args...) {}
++# endif
++#else
++# ifdef DEBUG
++# define vprintk(fmt,args...) {}
++# define dprintk(fmt,args...) {printk(DRVNAME ": " fmt, ## args);}
++# define vdprintk(fmt,args...) {}
++# else
++# define vprintk(fmt,args...) {}
++# define dprintk(fmt,args...) {}
++# define vdprintk(fmt,args...) {}
++# endif
++#endif
++
++#endif /* _VerboseDebug_h */
++
+diff -urN linux-2.4.26/Makefile linux-2.4.26-vrs1-lnode80/Makefile
+--- linux-2.4.26/Makefile 2005-11-02 16:54:16.000000000 -0400
++++ linux-2.4.26-vrs1-lnode80/Makefile 2005-11-03 10:28:43.000000000 -0400
+@@ -1,11 +1,11 @@
+ VERSION = 2
+ PATCHLEVEL = 4
+ SUBLEVEL = 26
+-EXTRAVERSION =-vrs1
++EXTRAVERSION =-vrs1-lnode80
+
+ KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+
+-ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
++ARCH := arm
+ KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")
+
+ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+@@ -19,7 +19,7 @@
+ HOSTCC = gcc
+ HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+
+-CROSS_COMPILE =
++CROSS_COMPILE = arm-linux-
+
+ #
+ # Include the make variables (CC, etc...)