diff options
| author | Thomas Petazzoni <thomas.petazzoni@free-electrons.com> | 2010-12-05 21:53:06 +0100 |
|---|---|---|
| committer | Peter Korsgaard <jacmet@sunsite.dk> | 2010-12-16 15:03:49 +0100 |
| commit | 0fabb345a785dffe7bd91536c81c8ef54eb8ed43 (patch) | |
| tree | 87b7995c210f6cb684aa105805a99ee008ddb530 /target/device/Atmel/atstk100x/target_skeleton | |
| parent | 27940e88b7eca32e11befba998b530f4f86aaece (diff) | |
| download | buildroot-novena-0fabb345a785dffe7bd91536c81c8ef54eb8ed43.tar.gz buildroot-novena-0fabb345a785dffe7bd91536c81c8ef54eb8ed43.zip | |
board: update and minimize atstk100x_defconfig
Use recent U-Boot and kernel version, remove target skeleton and use
the default one instead, remove useless kernel configuration, busybox
configuration and device table.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Diffstat (limited to 'target/device/Atmel/atstk100x/target_skeleton')
57 files changed, 0 insertions, 4334 deletions
diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/TZ b/target/device/Atmel/atstk100x/target_skeleton/etc/TZ deleted file mode 100644 index 36498c4a7..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/TZ +++ /dev/null @@ -1 +0,0 @@ -CET1CDT diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/asound.state b/target/device/Atmel/atstk100x/target_skeleton/etc/asound.state deleted file mode 100644 index 55fb3f00a..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/asound.state +++ /dev/null @@ -1,108 +0,0 @@ -state.at73c213_0 { - control.1 { - comment.access 'read write' - comment.type INTEGER - comment.count 2 - comment.range '0 - 31' - iface MIXER - name 'Master Playback Volume' - value.0 21 - value.1 21 - } - control.2 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 2 - iface MIXER - name 'Master Playback Switch' - value.0 true - value.1 true - } - control.3 { - comment.access 'read write' - comment.type INTEGER - comment.count 2 - comment.range '0 - 31' - iface MIXER - name 'PCM Playback Volume' - value.0 21 - value.1 21 - } - control.4 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 2 - iface MIXER - name 'PCM Playback Switch' - value.0 true - value.1 true - } - control.5 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 1 - iface MIXER - name 'Mono PA Playback Switch' - value true - } - control.6 { - comment.access 'read write' - comment.type INTEGER - comment.count 1 - comment.range '0 - 14' - iface MIXER - name 'PA Playback Volume' - value 10 - } - control.7 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 1 - iface MIXER - name 'PA High Gain Playback Switch' - value true - } - control.8 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 1 - iface MIXER - name 'PA Playback Switch' - value true - } - control.9 { - comment.access 'read write' - comment.type INTEGER - comment.count 1 - comment.range '14 - 31' - iface MIXER - name 'Aux Capture Volume' - value 14 - } - control.10 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 1 - iface MIXER - name 'Aux Capture Switch' - value false - } - control.11 { - comment.access 'read write' - comment.type INTEGER - comment.count 2 - comment.range '14 - 31' - iface MIXER - name 'Line Capture Volume' - value.0 14 - value.1 14 - } - control.12 { - comment.access 'read write' - comment.type BOOLEAN - comment.count 1 - iface MIXER - name 'Line Capture Switch' - value false - } -} diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/default/ntpdate b/target/device/Atmel/atstk100x/target_skeleton/etc/default/ntpdate deleted file mode 100644 index 80d8608c2..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/default/ntpdate +++ /dev/null @@ -1,6 +0,0 @@ -# servers to check. (Separate multiple servers with spaces.) -NTPSERVERS="pool.ntp.org" -# -# additional options for ntpdate -#NTPOPTIONS="-v" -NTPOPTIONS="-u" diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/dnsmasq.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/dnsmasq.conf deleted file mode 100644 index 09a3681e2..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/dnsmasq.conf +++ /dev/null @@ -1,385 +0,0 @@ -# Configuration file for dnsmasq. -# -# Format is one option per line, legal options are the same -# as the long options legal on the command line. See -# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. - -# The following two options make you a better netizen, since they -# tell dnsmasq to filter out queries which the public DNS cannot -# answer, and which load the servers (especially the root servers) -# uneccessarily. If you have a dial-on-demand link they also stop -# these requests from bringing up the link uneccessarily. - -# Never forward plain names (without a dot or domain part) -domain-needed -# Never forward addresses in the non-routed address spaces. -bogus-priv - - -# Uncomment this to filter useless windows-originated DNS requests -# which can trigger dial-on-demand links needlessly. -# Note that (amongst other things) this blocks all SRV requests, -# so don't use it if you use eg Kerberos. -# This option only affects forwarding, SRV records originating for -# dnsmasq (via srv-host= lines) are not suppressed by it. -#filterwin2k - -# Change this line if you want dns to get its upstream servers from -# somewhere other that /etc/resolv.conf -#resolv-file= - -# By default, dnsmasq will send queries to any of the upstream -# servers it knows about and tries to favour servers to are known -# to be up. Uncommenting this forces dnsmasq to try each query -# with each server strictly in the order they appear in -# /etc/resolv.conf -#strict-order - -# If you don't want dnsmasq to read /etc/resolv.conf or any other -# file, getting its servers from this file instead (see below), then -# uncomment this -#no-resolv - -# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv -# files for changes and re-read them then uncomment this. -#no-poll - -# Add other name servers here, with domain specs if they are for -# non-public domains. -#server=/localnet/192.168.0.1 - -# Add local-only domains here, queries in these domains are answered -# from /etc/hosts or DHCP only. -#local=/localnet/ - -# Add domains which you want to force to an IP address here. -# The example below send any host in doubleclick.net to a local -# webserver. -#address=/doubleclick.net/127.0.0.1 - -# If you want dnsmasq to change uid and gid to something other -# than the default, edit the following lines. -user=dnsmasq -#group= - -# If you want dnsmasq to listen for DHCP and DNS requests only on -# specified interfaces (and the loopback) give the name of the -# interface (eg eth0) here. -# Repeat the line for more than one interface. -interface=eth1 -# Or you can specify which interface _not_ to listen on -except-interface=eth0 -# Or which to listen on by address (remember to include 127.0.0.1 if -# you use this.) -#listen-address= -# If you want dnsmasq to provide only DNS service on an interface, -# configure it as shown above, and then use the following line to -# disable DHCP on it. -#no-dhcp-interface= - -# On systems which support it, dnsmasq binds the wildcard address, -# even when it is listening on only some interfaces. It then discards -# requests that it shouldn't reply to. This has the advantage of -# working even when interfaces come and go and change address. If you -# want dnsmasq to really bind only the interfaces it is listening on, -# uncomment this option. About the only time you may need this is when -# running another nameserver on the same machine. -#bind-interfaces - -# If you don't want dnsmasq to read /etc/hosts, uncomment the -# following line. -#no-hosts -# or if you want it to read another file, as well as /etc/hosts, use -# this. -addn-hosts=/etc/hosts.dnsmasq - -# Set this (and domain: see below) if you want to have a domain -# automatically added to simple names in a hosts-file. -#expand-hosts - -# Set the domain for dnsmasq. this is optional, but if it is set, it -# does the following things. -# 1) Allows DHCP hosts to have fully qualified domain names, as long -# as the domain part matches this setting. -# 2) Sets the "domain" DHCP option thereby potentially setting the -# domain of all systems configured by DHCP -# 3) Provides the domain part for "expand-hosts" -domain=example.net - -# Uncomment this to enable the integrated DHCP server, you need -# to supply the range of addresses available for lease and optionally -# a lease time. If you have more than one network, you will need to -# repeat this for each network on which you want to supply DHCP -# service. -#dhcp-range=192.168.0.50,192.168.0.150,12h - -# This is an example of a DHCP range where the netmask is given. This -# is needed for networks we reach the dnsmasq DHCP server via a relay -# agent. If you don't know what a DHCP relay agent is, you probably -# don't need to worry about this. -dhcp-range=10.0.0.20,10.0.0.254,255.255.255.0,72h - -# This is an example of a DHCP range with a network-id, so that -# some DHCP options may be set only for this network. -#dhcp-range=red,192.168.0.50,192.168.0.150 - -# Supply parameters for specified hosts using DHCP. There are lots -# of valid alternatives, so we will give examples of each. Note that -# IP addresses DO NOT have to be in the range given above, they just -# need to be on the same network. The order of the parameters in these -# do not matter, it's permissble to give name,adddress and MAC in any order - -# Always allocate the host with ethernet address 11:22:33:44:55:66 -# The IP address 192.168.0.60 -#dhcp-host=11:22:33:44:55:66,192.168.0.60 - -# Always set the name of the host with hardware address -# 11:22:33:44:55:66 to be "fred" -#dhcp-host=11:22:33:44:55:66,fred - -# Always give the host with ethernet address 11:22:33:44:55:66 -# the name fred and IP address 192.168.0.60 and lease time 45 minutes -#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m - -# Give the machine which says it's name is "bert" IP address -# 192.168.0.70 and an infinite lease -#dhcp-host=bert,192.168.0.70,infinite - -# Always give the host with client identifier 01:02:02:04 -# the IP address 192.168.0.60 -#dhcp-host=id:01:02:02:04,192.168.0.60 - -# Always give the host with client identifier "marjorie" -# the IP address 192.168.0.60 -#dhcp-host=id:marjorie,192.168.0.60 - -# Enable the address given for "judge" in /etc/hosts -# to be given to a machine presenting the name "judge" when -# it asks for a DHCP lease. -#dhcp-host=judge - -# Never offer DHCP service to a machine whose ethernet -# address is 11:22:33:44:55:66 -#dhcp-host=11:22:33:44:55:66,ignore - -# Ignore any client-id presented by the machine with ethernet -# address 11:22:33:44:55:66. This is useful to prevent a machine -# being treated differently when running under different OS's or -# between PXE boot and OS boot. -#dhcp-host=11:22:33:44:55:66,id:* - -# Send extra options which are tagged as "red" to -# the machine with ethernet address 11:22:33:44:55:66 -#dhcp-host=11:22:33:44:55:66,net:red - -# Send extra options which are tagged as "red" to -# any machine with ethernet address starting 11:22:33: -#dhcp-host=11:22:33:*:*:*,net:red - -# Send extra options which are tagged as "red" to any machine whose -# DHCP vendorclass string includes the substring "Linux" -#dhcp-vendorclass=red,Linux - -# Send extra options which are tagged as "red" to any machine one -# of whose DHCP userclass strings includes the substring "accounts" -#dhcp-userclass=red,accounts - -# Send extra options which are tagged as "red" to any machine whose -# MAC address matches the pattern. -#dhcp-mac=red,00:60:8C:*:*:* - -# If this line is uncommented, dnsmasq will read /etc/ethers and act -# on the ethernet-address/IP pairs found there just as if they had -# been given as --dhcp-host options. Useful if you keep -# MAC-address/host mappings there for other purposes. -read-ethers - -# Send options to hosts which ask for a DHCP lease. -# See RFC 2132 for details of available options. -# Note that all the common settings, such as netmask and -# broadcast address, DNS server and default route, are given -# sane defaults by dnsmasq. You very likely will not need any -# any dhcp-options. If you use Windows clients and Samba, there -# are some options which are recommended, they are detailed at the -# end of this section. -# For reference, the common options are: -# subnet mask - 1 -# default router - 3 -# DNS server - 6 -# broadcast address - 28 - -# Override the default route supplied by dnsmasq, which assumes the -# router is the same machine as the one running dnsmasq. -#dhcp-option=3,1.2.3.4 - -# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 -#dhcp-option=42,192.168.0.4,10.10.0.5 - -# Set the NTP time server address to be the same machine as -# is running dnsmasq -dhcp-option=42,0.0.0.0 - -# Set the NIS domain name to "welly" -#dhcp-option=40,welly - -# Set the default time-to-live to 50 -#dhcp-option=23,50 - -# Set the "all subnets are local" flag -#dhcp-option=27,1 - -# Send the etherboot magic flag and then etherboot options (a string). -#dhcp-option=128,e4:45:74:68:00:00 -#dhcp-option=129,NIC=eepro100 - -# Specify an option which will only be sent to the "red" network -# (see dhcp-range for the declaration of the "red" network) -#dhcp-option=red,42,192.168.1.1 - -# The following DHCP options set up dnsmasq in the same way as is specified -# for the ISC dhcpcd in -# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt -# adapted for a typical dnsmasq installation where the host running -# dnsmasq is also the host running samba. -# you may want to uncomment them if you use Windows clients and Samba. -dhcp-option=19,0 # option ip-forwarding off -dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s) -dhcp-option=45,0.0.0.0 # netbios datagram distribution server -dhcp-option=46,8 # netbios node type -dhcp-option=47 # empty netbios scope. - -# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client -# probably doesn't support this...... -#dhcp-option=119,eng.apple.com,marketing.apple.com - -# Send RFC-3442 classless static routes (note the netmask encoding) -#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 - -# Send encapsulated vendor-class specific options. The vendor-class -# is sent as DHCP option 60, and all the options marked with the -# vendor class are send encapsulated in DHCP option 43. The meaning of -# the options is defined by the vendor-class. This example sets the -# mtftp address to 0.0.0.0 for PXEClients -#dhcp-option=vendor:PXEClient,1,0.0.0.0 - -# Set the boot filename and tftpd server name and address -# for BOOTP. You will only need this is you want to -# boot machines over the network. -#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3 - -# Set the limit on DHCP leases, the default is 150 -#dhcp-lease-max=150 - -# The DHCP server needs somewhere on disk to keep its lease database. -# This defaults to a sane location, but if you want to change it, use -# the line below. -dhcp-leasefile=/var/lib/dnsmasq/dnsmasq.leases - -# Set the DHCP server to authoritative mode. In this mode it will barge in -# and take over the lease for any client which broadcasts on the network, -# whether it has a record of the lease or not. This avoids long timeouts -# when a machine wakes up on a new network. DO NOT enable this if there's -# the slighest chance that you might end up accidentally configuring a DHCP -# server for your campus/company accidentally. The ISC server uses the same -# the same option, and this URL provides more information: -# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php -dhcp-authoritative - -# Run an executable when a DHCP lease is created or destroyed. -# The arguments sent to the script are "add" or "del", -# then the MAC address, the IP address and finally the hostname -# if there is one. -#dhcp-script=/bin/echo - -# Set the cachesize here. -#cache-size=150 - -# If you want to disable negative caching, uncomment this. -#no-negcache - -# Normally responses which come form /etc/hosts and the DHCP lease -# file have Time-To-Live set as zero, which conventionally means -# do not cache further. If you are happy to trade lower load on the -# server for potentially stale date, you can set a time-to-live (in -# seconds) here. -#local-ttl= - -# If you want dnsmasq to detect attempts by Verisign to send queries -# to unregistered .com and .net hosts to its sitefinder service and -# have dnsmasq instead return the correct NXDOMAIN response, uncomment -# this line. You can add similar lines to do the same for other -# registries which have implemented wildcard A records. -#bogus-nxdomain=64.94.110.11 - -# If you want to fix up DNS results from upstream servers, use the -# alias option. This only works for IPv4. -# This alias makes a result of 1.2.3.4 appear as 5.6.7.8 -#alias=1.2.3.4,5.6.7.8 -# and this maps 1.2.3.x to 5.6.7.x -#alias=1.2.3.0,5.6.7.0,255.255.255.0 - - -# Change these lines if you want dnsmasq to serve MX records. - -# Return an MX record named "maildomain.com" with target -# servermachine.com and preference 50 -#mx-host=maildomain.com,servermachine.com,50 - -# Set the default target for MX records created using the localmx option. -#mx-target=servermachine.com - -# Return an MX record pointing to the mx-target for all local -# machines. -#localmx - -# Return an MX record pointing to itself for all local machines. -#selfmx - -# Change the following lines if you want dnsmasq to serve SRV -# records. These are useful if you want to serve ldap requests for -# Active Directory and other windows-originated DNS requests. -# See RFC 2782. -# You may add multiple srv-host lines. -# The fields are <name>,<target>,<port>,<priority>,<weight> -# If the domain part if missing from the name (so that is just has the -# service and protocol sections) then the domain given by the domain= -# config option is used. (Note that expand-hosts does not need to be -# set for this to work.) - -# A SRV record sending LDAP for the example.com domain to -# ldapserver.example.com port 289 -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 - -# A SRV record sending LDAP for the example.com domain to -# ldapserver.example.com port 289 (using domain=) -#domain=example.com -#srv-host=_ldap._tcp,ldapserver.example.com,389 - -# Two SRV records for LDAP, each with different priorities -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 - -# A SRV record indicating that there is no LDAP server for the domain -# example.com -#srv-host=_ldap._tcp.example.com - - -# Change the following lines to enable dnsmasq to serve TXT records. -# These are used for things like SPF and zeroconf. (Note that the -# domain-name expansion done for SRV records _does_not -# occur for TXT records.) - -#Example SPF. -#txt-record=example.com,v=spf1 a -all - -#Example zeroconf -#txt-record=_http._tcp.example.com,name=value,paper=A4 - - -# For debugging purposes, log each DNS query as it passes through -# dnsmasq. -#log-queries - -# Include a another lot of configuration options. -#conf-file=/etc/dnsmasq.more.conf - diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/fb.modes b/target/device/Atmel/atstk100x/target_skeleton/etc/fb.modes deleted file mode 100644 index 5884cca14..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/fb.modes +++ /dev/null @@ -1,5 +0,0 @@ -mode "320x240-68" - # D: 6.891 MHz, H: 17.852 kHz, V: 68.400 Hz - geometry 320 240 320 240 24 - timings 145116 17 33 10 10 16 1 -endmode diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/fstab b/target/device/Atmel/atstk100x/target_skeleton/etc/fstab deleted file mode 100644 index fcf1a78cd..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/fstab +++ /dev/null @@ -1,3 +0,0 @@ -# /etc/fstab: static file system information. -# -# <file system> <mount pt> <type> <options> <dump> <pass> diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/group b/target/device/Atmel/atstk100x/target_skeleton/etc/group deleted file mode 100644 index cec65da3f..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/group +++ /dev/null @@ -1,20 +0,0 @@ -root::0: -daemon:x:1: -bin:x:2: -sys:x:3: -adm:x:4: -tty:x:5: -disk:x:6: -kmem:x:9: -wheel:x:10:root -dialout:x:20: -utmp:x:43: -staff:x:50: -www-data::51: -ftp::52: -haldaemon:x:68: -dbus:x:81: -audio::101: -users::500: -default::1000: -nogroup::65534: diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/hostname b/target/device/Atmel/atstk100x/target_skeleton/etc/hostname deleted file mode 100644 index 29a3f1c38..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/hostname +++ /dev/null @@ -1 +0,0 @@ -stk1000.example.net diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/hosts b/target/device/Atmel/atstk100x/target_skeleton/etc/hosts deleted file mode 100644 index ef3816702..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/hosts +++ /dev/null @@ -1,12 +0,0 @@ -127.0.0.1 localhost.localdomain localhost -127.0.1.1 stk1000.example.net stk1000 - -# The following lines are desirable for IPv6 capable hosts -::1 localhost -::1 ip6-localhost ip6-loopback -::1 stk1000.example.net stk1000 -fe00::0 ip6-localnet -ff00::0 ip6-mcastprefix -ff02::1 ip6-allnodes -ff02::2 ip6-allrouters -ff02::3 ip6-allhosts diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/hosts.dnsmasq b/target/device/Atmel/atstk100x/target_skeleton/etc/hosts.dnsmasq deleted file mode 100644 index b831444c6..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/hosts.dnsmasq +++ /dev/null @@ -1,246 +0,0 @@ -# Local server -10.0.0.1 stk1000.example.net -10.0.0.1 hostmaster.example.net -10.0.0.1 ftp.example.net -10.0.0.1 ns.example.net -10.0.0.1 ssh.example.net -10.0.0.1 samba.example.net -10.0.0.1 telnet.example.net -10.0.0.1 www.example.net - -# DHCP pool -10.0.0.20 dhcp-020.example.net -10.0.0.21 dhcp-021.example.net -10.0.0.22 dhcp-022.example.net -10.0.0.23 dhcp-023.example.net -10.0.0.24 dhcp-024.example.net -10.0.0.25 dhcp-025.example.net -10.0.0.26 dhcp-026.example.net -10.0.0.27 dhcp-027.example.net -10.0.0.28 dhcp-028.example.net -10.0.0.29 dhcp-029.example.net -10.0.0.30 dhcp-030.example.net -10.0.0.31 dhcp-031.example.net -10.0.0.32 dhcp-032.example.net -10.0.0.33 dhcp-033.example.net -10.0.0.34 dhcp-034.example.net -10.0.0.35 dhcp-035.example.net -10.0.0.36 dhcp-036.example.net -10.0.0.37 dhcp-037.example.net -10.0.0.38 dhcp-038.example.net -10.0.0.39 dhcp-039.example.net -10.0.0.40 dhcp-040.example.net -10.0.0.41 dhcp-041.example.net -10.0.0.42 dhcp-042.example.net -10.0.0.43 dhcp-043.example.net -10.0.0.44 dhcp-044.example.net -10.0.0.45 dhcp-045.example.net -10.0.0.46 dhcp-046.example.net -10.0.0.47 dhcp-047.example.net -10.0.0.48 dhcp-048.example.net -10.0.0.49 dhcp-049.example.net -10.0.0.50 dhcp-050.example.net -10.0.0.51 dhcp-051.example.net -10.0.0.52 dhcp-052.example.net -10.0.0.53 dhcp-053.example.net -10.0.0.54 dhcp-054.example.net -10.0.0.55 dhcp-055.example.net -10.0.0.56 dhcp-056.example.net -10.0.0.57 dhcp-057.example.net -10.0.0.58 dhcp-058.example.net -10.0.0.59 dhcp-059.example.net -10.0.0.60 dhcp-060.example.net -10.0.0.61 dhcp-061.example.net -10.0.0.62 dhcp-062.example.net -10.0.0.63 dhcp-063.example.net -10.0.0.64 dhcp-064.example.net -10.0.0.65 dhcp-065.example.net -10.0.0.66 dhcp-066.example.net -10.0.0.67 dhcp-067.example.net -10.0.0.68 dhcp-068.example.net -10.0.0.69 dhcp-069.example.net -10.0.0.70 dhcp-070.example.net -10.0.0.71 dhcp-071.example.net -10.0.0.72 dhcp-072.example.net -10.0.0.73 dhcp-073.example.net -10.0.0.74 dhcp-074.example.net -10.0.0.75 dhcp-075.example.net -10.0.0.76 dhcp-076.example.net -10.0.0.77 dhcp-077.example.net -10.0.0.78 dhcp-078.example.net -10.0.0.79 dhcp-079.example.net -10.0.0.80 dhcp-080.example.net -10.0.0.81 dhcp-081.example.net -10.0.0.82 dhcp-082.example.net -10.0.0.83 dhcp-083.example.net -10.0.0.84 dhcp-084.example.net -10.0.0.85 dhcp-085.example.net -10.0.0.86 dhcp-086.example.net -10.0.0.87 dhcp-087.example.net -10.0.0.88 dhcp-088.example.net -10.0.0.89 dhcp-089.example.net -10.0.0.90 dhcp-090.example.net -10.0.0.91 dhcp-091.example.net -10.0.0.92 dhcp-092.example.net -10.0.0.93 dhcp-093.example.net -10.0.0.94 dhcp-094.example.net -10.0.0.95 dhcp-095.example.net -10.0.0.96 dhcp-096.example.net -10.0.0.97 dhcp-097.example.net -10.0.0.98 dhcp-098.example.net -10.0.0.99 dhcp-099.example.net -10.0.0.100 dhcp-100.example.net -10.0.0.101 dhcp-101.example.net -10.0.0.102 dhcp-102.example.net -10.0.0.103 dhcp-103.example.net -10.0.0.104 dhcp-104.example.net -10.0.0.105 dhcp-105.example.net -10.0.0.106 dhcp-106.example.net -10.0.0.107 dhcp-107.example.net -10.0.0.108 dhcp-108.example.net -10.0.0.109 dhcp-109.example.net -10.0.0.110 dhcp-110.example.net -10.0.0.111 dhcp-111.example.net -10.0.0.112 dhcp-112.example.net -10.0.0.113 dhcp-113.example.net -10.0.0.114 dhcp-114.example.net -10.0.0.115 dhcp-115.example.net -10.0.0.116 dhcp-116.example.net -10.0.0.117 dhcp-117.example.net -10.0.0.118 dhcp-118.example.net -10.0.0.119 dhcp-119.example.net -10.0.0.120 dhcp-120.example.net -10.0.0.121 dhcp-121.example.net -10.0.0.122 dhcp-122.example.net -10.0.0.123 dhcp-123.example.net -10.0.0.124 dhcp-124.example.net -10.0.0.125 dhcp-125.example.net -10.0.0.126 dhcp-126.example.net -10.0.0.127 dhcp-127.example.net -10.0.0.128 dhcp-128.example.net -10.0.0.129 dhcp-129.example.net -10.0.0.130 dhcp-130.example.net -10.0.0.131 dhcp-131.example.net -10.0.0.132 dhcp-132.example.net -10.0.0.133 dhcp-133.example.net -10.0.0.134 dhcp-134.example.net -10.0.0.135 dhcp-135.example.net -10.0.0.136 dhcp-136.example.net -10.0.0.137 dhcp-137.example.net -10.0.0.138 dhcp-138.example.net -10.0.0.139 dhcp-139.example.net -10.0.0.140 dhcp-140.example.net -10.0.0.141 dhcp-141.example.net -10.0.0.142 dhcp-142.example.net -10.0.0.143 dhcp-143.example.net -10.0.0.144 dhcp-144.example.net -10.0.0.145 dhcp-145.example.net -10.0.0.146 dhcp-146.example.net -10.0.0.147 dhcp-147.example.net -10.0.0.148 dhcp-148.example.net -10.0.0.149 dhcp-149.example.net -10.0.0.150 dhcp-150.example.net -10.0.0.151 dhcp-151.example.net -10.0.0.152 dhcp-152.example.net -10.0.0.153 dhcp-153.example.net -10.0.0.154 dhcp-154.example.net -10.0.0.155 dhcp-155.example.net -10.0.0.156 dhcp-156.example.net -10.0.0.157 dhcp-157.example.net -10.0.0.158 dhcp-158.example.net -10.0.0.159 dhcp-159.example.net -10.0.0.160 dhcp-160.example.net -10.0.0.161 dhcp-161.example.net -10.0.0.162 dhcp-162.example.net -10.0.0.163 dhcp-163.example.net -10.0.0.164 dhcp-164.example.net -10.0.0.165 dhcp-165.example.net -10.0.0.166 dhcp-166.example.net -10.0.0.167 dhcp-167.example.net -10.0.0.168 dhcp-168.example.net -10.0.0.169 dhcp-169.example.net -10.0.0.170 dhcp-170.example.net -10.0.0.171 dhcp-171.example.net -10.0.0.172 dhcp-172.example.net -10.0.0.173 dhcp-173.example.net -10.0.0.174 dhcp-174.example.net -10.0.0.175 dhcp-175.example.net -10.0.0.176 dhcp-176.example.net -10.0.0.177 dhcp-177.example.net -10.0.0.178 dhcp-178.example.net -10.0.0.179 dhcp-179.example.net -10.0.0.180 dhcp-180.example.net -10.0.0.181 dhcp-181.example.net -10.0.0.182 dhcp-182.example.net -10.0.0.183 dhcp-183.example.net -10.0.0.184 dhcp-184.example.net -10.0.0.185 dhcp-185.example.net -10.0.0.186 dhcp-186.example.net -10.0.0.187 dhcp-187.example.net -10.0.0.188 dhcp-188.example.net -10.0.0.189 dhcp-189.example.net -10.0.0.190 dhcp-190.example.net -10.0.0.191 dhcp-191.example.net -10.0.0.192 dhcp-192.example.net -10.0.0.193 dhcp-193.example.net -10.0.0.194 dhcp-194.example.net -10.0.0.195 dhcp-195.example.net -10.0.0.196 dhcp-196.example.net -10.0.0.197 dhcp-197.example.net -10.0.0.198 dhcp-198.example.net -10.0.0.199 dhcp-199.example.net -10.0.0.200 dhcp-200.example.net -10.0.0.201 dhcp-201.example.net -10.0.0.202 dhcp-202.example.net -10.0.0.203 dhcp-203.example.net -10.0.0.204 dhcp-204.example.net -10.0.0.205 dhcp-205.example.net -10.0.0.206 dhcp-206.example.net -10.0.0.207 dhcp-207.example.net -10.0.0.208 dhcp-208.example.net -10.0.0.209 dhcp-209.example.net -10.0.0.210 dhcp-210.example.net -10.0.0.211 dhcp-211.example.net -10.0.0.212 dhcp-212.example.net -10.0.0.213 dhcp-213.example.net -10.0.0.214 dhcp-214.example.net -10.0.0.215 dhcp-215.example.net -10.0.0.216 dhcp-216.example.net -10.0.0.217 dhcp-217.example.net -10.0.0.218 dhcp-218.example.net -10.0.0.219 dhcp-219.example.net -10.0.0.220 dhcp-220.example.net -10.0.0.221 dhcp-221.example.net -10.0.0.222 dhcp-222.example.net -10.0.0.223 dhcp-223.example.net -10.0.0.224 dhcp-224.example.net -10.0.0.225 dhcp-225.example.net -10.0.0.226 dhcp-226.example.net -10.0.0.227 dhcp-227.example.net -10.0.0.228 dhcp-228.example.net -10.0.0.229 dhcp-229.example.net -10.0.0.230 dhcp-230.example.net -10.0.0.231 dhcp-231.example.net -10.0.0.232 dhcp-232.example.net -10.0.0.233 dhcp-233.example.net -10.0.0.234 dhcp-234.example.net -10.0.0.235 dhcp-235.example.net -10.0.0.236 dhcp-236.example.net -10.0.0.237 dhcp-237.example.net -10.0.0.238 dhcp-238.example.net -10.0.0.239 dhcp-239.example.net -10.0.0.240 dhcp-240.example.net -10.0.0.241 dhcp-241.example.net -10.0.0.242 dhcp-242.example.net -10.0.0.243 dhcp-243.example.net -10.0.0.244 dhcp-244.example.net -10.0.0.245 dhcp-245.example.net -10.0.0.246 dhcp-246.example.net -10.0.0.247 dhcp-247.example.net -10.0.0.248 dhcp-248.example.net -10.0.0.249 dhcp-249.example.net -10.0.0.250 dhcp-250.example.net -10.0.0.251 dhcp-251.example.net -10.0.0.252 dhcp-252.example.net -10.0.0.253 dhcp-253.example.net -10.0.0.254 dhcp-254.example.net diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/httpd.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/httpd.conf deleted file mode 100644 index 640f8150d..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/httpd.conf +++ /dev/null @@ -1,2 +0,0 @@ -# Allow all trafic -A: * diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/inetd.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/inetd.conf deleted file mode 100644 index 23eba7988..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/inetd.conf +++ /dev/null @@ -1,3 +0,0 @@ -#netbios-ssn stream tcp nowait root.root /usr/sbin/smbd smbd -#netbios-ns dgram udp wait root.root /usr/sbin/nmbd nmbd -#swat stream tcp nowait.400 root.root /usr/sbin/swat swat diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K20alsa-utils b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K20alsa-utils deleted file mode 100644 index 68f746234..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K20alsa-utils +++ /dev/null @@ -1,14 +0,0 @@ -#!/bin/sh - -PROGRAM=/usr/sbin/alsactl - -# Exit silently if alsa-utils isn't installed -[ -x ${PROGRAM} ] || exit 0 - -echo -n "Saving mixer state: " -if ${PROGRAM} store; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K70sendsig b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K70sendsig deleted file mode 100644 index 1a2485251..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K70sendsig +++ /dev/null @@ -1 +0,0 @@ -#!/bin/sh diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K80netfs b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K80netfs deleted file mode 100644 index 1a2485251..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K80netfs +++ /dev/null @@ -1 +0,0 @@ -#!/bin/sh diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K85network b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K85network deleted file mode 100644 index d4e8e6139..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K85network +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -IFDOWN=/sbin/ifdown - -echo -n "Stopping networking: " -if ${IFDOWN} -a; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K90localfs b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K90localfs deleted file mode 100644 index 1a2485251..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/K90localfs +++ /dev/null @@ -1 +0,0 @@ -#!/bin/sh diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S00mountvirtfs b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S00mountvirtfs deleted file mode 100644 index d9e5c9249..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S00mountvirtfs +++ /dev/null @@ -1,74 +0,0 @@ -#!/bin/sh - -MOUNT=/bin/mount -MKDIR=/bin/mkdir - -retval=0 - -mount_fs() -{ - if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then - return; - fi - - if [ "$4" = "" ]; then - if ! ${MOUNT} -t $3 $1 $2; then - echo " mount $2 failed" - retval=1 - return 1 - else - echo " $2 mounted" - fi - else - if ! ${MOUNT} -t $3 -o $4 $1 $2; then - echo " mount $2 failed" - retval=1 - return 1 - else - echo " $2 mounted" - fi - fi - - return 0 -} - -mkdir_fs() -{ - if [ "$1" = "" ]; then - return; - fi - - if ! ${MKDIR} $1; then - echo " mkdir $1 failed" - retval=1 - return 1 - else - echo " $1 directory made" - fi - - return 0 -} - -echo "Mounting virtual filesystems:" - -mount_fs proc /proc proc -mount_fs sys /sys sysfs - -if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then - mkdir_fs /dev/pts - mount_fs pts /dev/pts devpts - mkdir_fs /dev/shm - # g_serial is not detected by mdev. - mknod /dev/ttygserial c 127 0 -fi - -mount_fs config /config configfs -mount_fs tmp /tmp tmpfs -mount_fs run /var/run tmpfs -mount_fs log /var/log tmpfs - -if [ $retval -ne 0 ]; then - echo " WARNING: not able to mount all virtual file systems" -fi - -exit $retval diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S01hotplug b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S01hotplug deleted file mode 100644 index 15e075b88..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S01hotplug +++ /dev/null @@ -1,14 +0,0 @@ -#!/bin/sh - -echo -n "Setting up mdev: " -set -e -trap 'echo "failed"' EXIT -/bin/ln -s /proc/self/fd /dev/fd -/bin/ln -s /proc/self/fd/0 /dev/stdin -/bin/ln -s /proc/self/fd/1 /dev/stdout -/bin/ln -s /proc/self/fd/2 /dev/stderr -/bin/ln -s /proc/kcore /dev/core -/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug -/sbin/mdev -s -trap - EXIT -echo "done" diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S02hostname b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S02hostname deleted file mode 100644 index cf858ed62..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S02hostname +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh - -PROGRAM=/bin/hostname - -echo -n "Setting hostname: " -[ -x ${PROGRAM} ] || (echo " missing"; exit 0) - -if [ -f /etc/hostname ]; then - HOST="$(cat /etc/hostname)" -else - HOST="localhost.localdomain" -fi - -start() { - if ${PROGRAM} "${HOST}"; then - echo "'${HOST}'" - else - echo "failed" - exit 1 - fi -} - -stop() { - return 0 -} - -restart() { - stop - start -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart|reload) - restart - ;; - *) - echo $"Usage: $0 {start|stop|restart}" - exit 1 -esac - -exit $? diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S03bootsplash b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S03bootsplash deleted file mode 100644 index 21a3a5758..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S03bootsplash +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/sh - -FBV=/usr/bin/fbv -FBSET=/usr/sbin/fbset -FBMODEFILE="/etc/fb.modes" -SPLASHFILE="/etc/stk1000bootsplash.jpg" - -echo -n "Bootsplash image: " -if [ ! -x "${FBV}" -o ! -x "${FBSET}" -o \ - ! -f "${SPLASHFILE}" -o ! -f "${FBMODEFILE}" ]; then - echo "missing" - exit 1 -fi - -if ! ${FBSET} 320x240-68; then - echo "failed" - exit 1 -fi - -${FBV} ${SPLASHFILE} > /dev/null & -if [ $? -eq 0 ]; then - echo "loaded" -else - echo "failed" -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S08syslog b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S08syslog deleted file mode 100644 index 58b05925d..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S08syslog +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/sh - -SYSLOGD=/sbin/syslogd - -echo -n "Starting syslogd: " -if [ ! -x "${SYSLOGD}" ]; then - echo "missing" - exit 1 -fi - -if ${SYSLOGD}; then - echo "done" -else - echo "failed" - exit 1 -fi - -echo -n "Log messages to syslog: " -if echo 4 4 1 7 > /proc/sys/kernel/printk; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S09klog b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S09klog deleted file mode 100644 index 1b0028a08..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S09klog +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -KLOGD=/sbin/klogd - -echo -n "Starting klogd: " -if [ ! -x "${KLOGD}" ]; then - echo "missing" - exit 1 -fi - -if ${KLOGD}; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S10modules-init b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S10modules-init deleted file mode 100644 index e2cf4e303..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S10modules-init +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh - -MODPROBE=/sbin/modprobe - -echo -n "Probing modules: " -if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then - echo "missing" - exit 1 -else - echo -fi - -grep '^[^#]' "/etc/modules" | \ -while read module args; do - [ "$module" ] || continue - if ${MODPROBE} $module $args; then - echo " $module loaded" - else - echo " $module failed" - fi -done diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S15localfs b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S15localfs deleted file mode 100644 index a0b5a8982..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S15localfs +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -MOUNT=/bin/mount - -echo -n "Mounting local filesystems: " -if ${MOUNT} -a; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S20network b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S20network deleted file mode 100644 index 06cf8cb00..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S20network +++ /dev/null @@ -1,11 +0,0 @@ -#! /bin/sh - -IFUP=/sbin/ifup - -echo -n "Network interfaces: " -if ${IFUP} -a; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S40telnetd b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S40telnetd deleted file mode 100644 index e0fd2f2f3..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S40telnetd +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -TELNETD=/usr/sbin/telnetd - -echo -n "Starting telnetd: " -if [ ! -x "${TELNETD}" ]; then - echo "missing" - exit 1 -fi - -if ${TELNETD} -l /bin/sh; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S41inetd b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S41inetd deleted file mode 100644 index e485dcc5b..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S41inetd +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -INETD=/usr/sbin/inetd - -echo -n "Starting inetd: " -if [ ! -x "${INETD}" ]; then - echo "missing" - exit 1 -fi - -if ${INETD}; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S42httpd b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S42httpd deleted file mode 100644 index f8e7813e6..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S42httpd +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -HTTPD=/usr/sbin/httpd - -echo -n "Starting httpd: " -if [ ! -x "${HTTPD}" ]; then - echo "missing" - exit 1 -fi - -if ${HTTPD} -h /www; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S43ntp b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S43ntp deleted file mode 100644 index 69fa4c894..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S43ntp +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -NTPDATE=/usr/bin/ntpdate - -if [ -f /etc/default/ntpdate ]; then - . /etc/default/ntpdate -else - echo "WARNING: missing /etc/default/ntpdate" - exit 1 -fi - -echo -n "Starting ntpdate: " -if [ ! -x ${NTPDATE} ]; then - echo "missing" - echo -n " WARNING: could not syncronize clock, " - echo "edit NTPSERVERS in /etc/default/ntpdate." - exit 1 -fi - -if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then - echo "done" -else - echo "failed" - echo -n " WARNING: could not syncronize clock, " - echo "edit NTPSERVERS in /etc/default/ntpdate." - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S49netfs b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S49netfs deleted file mode 100644 index e1e0fbf4f..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S49netfs +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -MOUNT=/bin/mount - -echo -n "Mounting remote filesystems: " -if ${MOUNT} -t nfs -a; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S50alsa-utils b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S50alsa-utils deleted file mode 100644 index e92e5d8ae..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S50alsa-utils +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh - -PROGRAM=/usr/sbin/alsactl - -# Exit silently if alsa-utils isn't installed -[ -x ${PROGRAM} ] || exit 0 - -echo -n "Restoring mixer state: " -if [ ! -f /etc/asound.state ]; then - echo "missing" - exit 1 -fi - -if ${PROGRAM} restore; then - echo "done" -else - echo "failed" - exit 1 -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S99gpio b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S99gpio deleted file mode 100644 index 7c07f2801..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S99gpio +++ /dev/null @@ -1,142 +0,0 @@ -#!/bin/sh - -echo -n "Get board type for GPIO: " -if [ ! -e "/etc/release" ]; then - echo "missing"; - exit 1 -fi - -BOARD=`cat /etc/release | cut -d ' ' -f1` - -if [ "${BOARD}" = "" ]; then - echo "none"; -elif [ "${BOARD}" = "NGW" ]; then - echo "'${BOARD}'" - - echo -n " boot LED: " - if mkdir /config/gpio/bootled > /dev/null 2> /dev/null; then - if ! echo 0 > /config/gpio/bootled/gpio_id; then - echo "failed" - exit 1 - fi - - if ! echo 0x10000 > /config/gpio/bootled/pin_mask; then - echo "failed" - exit 1 - fi - - if ! echo 0x10000 > /config/gpio/bootled/oe_mask; then - echo "failed" - exit 1 - fi - - if ! echo 1 > /config/gpio/bootled/enabled; then - echo "failed" - exit 1 - fi - - if ! echo 0x10000 > /dev/gpio0; then - echo "failed" - exit 1 - fi - - echo "done" - else - echo "failed" - exit 1 - fi - - echo -n " LED A: " - if mkdir /config/gpio/leda > /dev/null 2> /dev/null; then - if ! echo 0 > /config/gpio/leda/gpio_id; then - echo "failed" - exit 1 - fi - - if ! echo 0x80000 > /config/gpio/leda/pin_mask; then - echo "failed" - exit 1 - fi - - if ! echo 0x80000 > /config/gpio/leda/oe_mask; then - echo "failed" - exit 1 - fi - - if ! echo 1 > /config/gpio/leda/enabled; then - echo "failed" - exit 1 - fi - - if ! echo 0 > /dev/gpio1; then - echo "failed" - exit 1 - fi - - echo "done" - else - echo "failed" - exit 1 - fi - - echo -n " LED B: " - if mkdir /config/gpio/ledb > /dev/null 2> /dev/null; then - if ! echo 4 > /config/gpio/ledb/gpio_id; then - echo "failed" - exit 1 - fi - - if ! echo 0x80000 > /config/gpio/ledb/pin_mask; then - echo "failed" - exit 1 - fi - - if ! echo 0x80000 > /config/gpio/ledb/oe_mask; then - echo "failed" - exit 1 - fi - - if ! echo 1 > /config/gpio/ledb/enabled; then - echo "failed" - exit 1 - fi - - if ! echo 0 > /dev/gpio2; then - echo "failed" - exit 1 - fi - - echo "done" - else - echo "failed" - exit 1 - fi -elif [ "${BOARD}" = "STK1000" ]; then # end NGW - echo "'${BOARD}'" - - echo -n " switches: " - if mkdir /config/gpio/switches > /dev/null 2> /dev/null; then - if ! echo 1 > /config/gpio/switches/gpio_id; then - echo "failed" - exit 1 - fi - - if ! echo 0xff > /config/gpio/switches/pin_mask; then - echo "failed" - exit 1 - fi - - if ! echo 1 > /config/gpio/switches/enabled; then - echo "failed" - exit 1 - fi - - echo "done" - else - echo "failed" - exit 1 - fi -else # end STK1000 - echo "'${BOARD}'" - echo " WARNING: no GPIO for this board" -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S99splash b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S99splash deleted file mode 100644 index 47001adb2..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/S99splash +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -PROGRAM=/usr/bin/fbv -SPLASHFILE="/etc/stk1000splash.jpg" - -echo -n "Splash image: " -if [ ! -x "${PROGRAM}" -o ! -f "${SPLASHFILE}" ]; then - echo "missing" - exit 1 -fi - -${PROGRAM} ${SPLASHFILE} > /dev/null & -if [ $? -eq 0 ]; then - echo "loaded" -else - echo "failed" -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/rcK b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/rcK deleted file mode 100644 index 1db1400fa..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/rcK +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh - -echo "Shutting down ..." -for k in /etc/init.d/K*; do - $k stop -done diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/rcS b/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/rcS deleted file mode 100644 index a8ea85cdc..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/init.d/rcS +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -for s in /etc/init.d/S*; do - if [ -x $s ]; then - $s start - fi -done - -echo -echo "STK1000 ready" -echo diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/inittab b/target/device/Atmel/atstk100x/target_skeleton/etc/inittab deleted file mode 100644 index 82672b1bd..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/inittab +++ /dev/null @@ -1,28 +0,0 @@ -# Inittab for the ATSTK1000 development board -# -# Note: BusyBox init doesn't support runlevels. The runlevels field is -# completely ignored by BusyBox init. If you want runlevels, use sysvinit. -# -# Format for each entry: <id>:<runlevels>:<action>:<process> -# -# id == tty to run on, or empty for /dev/console -# runlevels == ignored -# action == one of sysinit, respawn, askfirst, wait, and once -# process == program to run - -# Run the rcS script after kernel is booted. -::sysinit:/etc/init.d/rcS - -# Run a shell on the first serial port. Comment out if you want a getty instead. -ttyS0::respawn:-/bin/sh - -# Run a shell on the g_serial port (USB gadget device)? This shell will spawn -# error message if the device is not connected. -#ttygserial::respawn:-/bin/sh - -# Uncomment this to run a getty on the first serial port. -#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 -ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100 - -# Run a script on shutdown. -::shutdown:/etc/init.d/rcK diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/mdev.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/mdev.conf deleted file mode 100644 index 046d0d40a..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/mdev.conf +++ /dev/null @@ -1,49 +0,0 @@ -# mdev.conf for ATSTK1000 -# -# Syntax: -# <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>] -# @: run <CMD> after creating -# $: run <CMD> before removal -# *: like @ and $ at the same time -# <CMD> is run inside /dev using system() - -full 0:0 666 -null 0:0 777 -zero 0:0 666 - -random 0:0 444 -urandom 0:0 444 - -console 0:5 0600 -kmem 0:9 000 -mem 0:9 0640 -ptmx 0:5 0660 - -sda.* 0:6 0660 -sdb.* 0:6 0660 -hda.* 0:6 0660 -hdb.* 0:6 0660 -mtd.* 0:6 0660 -mmc.* 0:6 0660 - -# Move input devices to input directory -event.* 0:0 0660 @(mkdir -p input&&mv $MDEV input) -mice 0:0 0660 @(mkdir -p input&&mv $MDEV input) -mouse.* 0:0 0660 @(mkdir -p input&&mv $MDEV input) - -# Move sound devices to sound directory -pcm.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd) -seq 0:101 0660 @(mkdir -p snd&&mv $MDEV snd) -timer 0:101 0660 @(mkdir -p snd&&mv $MDEV snd) -control.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd) - -tty 0:5 0660 -tty0.* 0:5 0660 -tty1.* 0:5 0660 -tty2.* 0:5 0660 -tty3.* 0:5 0660 -tty4.* 0:5 0660 -tty5.* 0:5 0660 -tty6.* 0:5 0660 - -ttyS.* 0:20 640 diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/modules b/target/device/Atmel/atstk100x/target_skeleton/etc/modules deleted file mode 100644 index 82da2e76d..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/modules +++ /dev/null @@ -1,4 +0,0 @@ -snd-at73c213 -snd-pcm-oss -gpio_mouse -mousedev diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/mplayer.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/mplayer.conf deleted file mode 100644 index 45d7d7ec9..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/mplayer.conf +++ /dev/null @@ -1,129 +0,0 @@ -# -# MPlayer configuration file -# -# Configuration files are read system-wide from /usr/local/etc/mplayer.conf -# and per user from ~/.mplayer/config, where per-user settings override -# system-wide settings, all of which are overrriden by the command line. -# -# The configuration file settings are the same as the command line -# options without the preceding '-'. -# -# See the CONFIGURATION FILES section in the man page -# for a detailed description of the syntax. - - -################## -# video settings # -################## - -# Specify default video driver (see -vo help for a list). -vo=fbdev2 - -# Direct rendring, skip double buffering for framebuffer device -dr=yes - -# Use SDL video with the aalib subdriver by default. -#vo = sdl:aalib - -# FBdev driver: -# -# mode to use (read from fb.modes) -#fbmode = 640x480-120 -# -# location of the fb.modes file -#fbmodeconfig = /etc/fb.modes - -# Specify your monitor timings for the vesa and fbdev video output drivers. -# See /etc/X11/XF86Config for timings. Be careful; if you specify settings -# that exceed the capabilities of your monitor, you may damage it. -# -# horizontal frequency range (k stands for 1000) -#monitor-hfreq = 31.5k-50k,70k -# -# vertical frequency range -#monitor-vfreq = 50-90 -# -# dotclock (or pixelclock) range (m stands for 1000000) -#monitor-dotclock = 30M-300M - -# Start in fullscreen mode by default. -#fs=yes - -# Change to a different videomode when going fullscreen. -#vm=yes - -# Override the autodetected color depth, may need 'vm=yes' as well. -#bpp=0 - -# Enable software scaling (powerful CPU needed) for video output -# drivers that do not support hardware scaling. -#zoom=yes - -# standard monitor size, with square pixels -#monitoraspect=4:3 - -# Use this for a widescreen monitor, non-square pixels. -#monitoraspect=16:9 - -# Keep the player window on top of all other windows. -#ontop=yes - - -################## -# audio settings # -################## - -# Specify default audio driver (see -ao help for a list). -ao=oss, - -# Use SDL audio driver with the esd subdriver by default. -#ao = sdl:esd - -# Specify the mixer device. -#mixer = /dev/mixer - -# Resample the sound to 44100Hz with the lavcresample audio filter. -#af=lavcresample=44100 - -# Specify default audio codec (see -ac help for a list). -ac=mad, - - -################## -# other settings # -################## - -# Drop frames to preserve audio/video sync. -#framedrop = yes - -# Specify your preferred skin here (skins are searched for in -# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>). -#skin = Abyss - -# Resample the font alphamap. -# 0 plain white fonts -# 0.75 very narrow black outline (default) -# 1 narrow black outline -# 10 bold black outline -#ffactor = 0.75 - -# cache settings -# -# Use 8MB input cache by default. -#cache = 8192 -# -# Prefill 20% of the cache before starting playback. -#cache-min = 20.0 -# -# Prefill 50% of the cache before restarting playback after the cache emptied. -#cache-seek-min = 50 - -# DVD: Display English subtitles if available. -#slang = en - -# DVD: Play English audio tracks if available. -#alang = en - - -# You can also include other configuration files. -#include = /path/to/the/file/you/want/to/include diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/mtab b/target/device/Atmel/atstk100x/target_skeleton/etc/mtab deleted file mode 120000 index e1c204547..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/mtab +++ /dev/null @@ -1 +0,0 @@ -../proc/mounts
\ No newline at end of file diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/network/interfaces b/target/device/Atmel/atstk100x/target_skeleton/etc/network/interfaces deleted file mode 100644 index a20055c77..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/network/interfaces +++ /dev/null @@ -1,11 +0,0 @@ -# Configure Loopback -auto lo -iface lo inet loopback - -# Configure Ethernet 0 -auto eth0 -iface eth0 inet dhcp - -# Configure Ethernet 1, not enabled by default -#auto eth1 -iface eth1 inet dhcp diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/ntp.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/ntp.conf deleted file mode 100644 index d1b0af96f..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/ntp.conf +++ /dev/null @@ -1,49 +0,0 @@ -# /etc/ntp.conf, configuration for ntpd - -# ntpd will use syslog() if logfile is not defined -#logfile /var/log/ntpd - -driftfile /var/lib/ntp/ntp.drift -statsdir /var/log/ - -statistics loopstats peerstats clockstats -filegen loopstats file loopstats type day enable -filegen peerstats file peerstats type day enable -filegen clockstats file clockstats type day enable - -# You do need to talk to an NTP server or two (or three). -#server ntp.your-provider.example - -# pool.ntp.org maps to more than 100 low-stratum NTP servers. -# Your server will pick a different set every time it starts up. -# *** Please consider joining the pool! *** -# *** <http://www.pool.ntp.org/#join> *** -server pool.ntp.org -server pool.ntp.org - -# ... and use the local system clock as a reference if all else fails -# NOTE: in a local network, set the local stratum of *one* stable server -# to 10; otherwise your clocks will drift apart if you lose connectivity. -server 127.127.1.0 -fudge 127.127.1.0 stratum 13 - -# By default, exchange time with everybody, but don't allow configuration. -# See /usr/share/doc/ntp-doc/html/accopt.html for details. -restrict default kod notrap nomodify nopeer noquery - -# Local users may interrogate the ntp server more closely. -restrict 127.0.0.1 nomodify - -# Clients from this (example!) subnet have unlimited access, -# but only if cryptographically authenticated -restrict 10.0.0.0 mask 255.255.255.0 notrust - -# If you want to provide time to your local subnet, change the next line. -# (Again, the address is an example only.) -broadcast 10.0.0.255 - -# If you want to listen to time broadcasts on your local subnet, -# de-comment the next lines. Please do this only if you trust everybody -# on the network! -#disable auth -#broadcastclient diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/passwd b/target/device/Atmel/atstk100x/target_skeleton/etc/passwd deleted file mode 100644 index 5e073f677..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/passwd +++ /dev/null @@ -1,18 +0,0 @@ -root:x:0:0:root:/:/bin/sh -daemon:x:1:1:daemon:/usr/sbin:/bin/sh -bin:x:2:2:bin:/bin:/bin/sh -sys:x:3:3:sys:/dev:/bin/sh -sync:x:4:100:sync:/bin:/bin/sync -mail:x:8:8:mail:/var/spool/mail:/bin/sh -proxy:x:13:13:proxy:/bin:/bin/sh -www-data:x:33:33:www-data:/var/www:/bin/sh -backup:x:34:34:backup:/var/backups:/bin/sh -operator:x:37:37:Operator:/var:/bin/sh -haldaemon:x:68:68:hald:/:/bin/sh -dbus:x:81:81:dbus:/var/run/dbus:/bin/sh -ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash -dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false -sshd:x:110:65534:Operator:/var/run/sshd:/bin/false -nobody:x:65534:65534:nobody:/nonexistent:/bin/false -avr32:x:500:500:Linux User,,,:/home/avr32:/bin/sh -default:x:1000:1000:Default non-root user:/home/default:/bin/sh diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/proftpd.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/proftpd.conf deleted file mode 100644 index 86b447d37..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/proftpd.conf +++ /dev/null @@ -1,31 +0,0 @@ -ServerName "ATSTK1002 FTP server" -ServerType standalone -DefaultServer on - -# Port 21 is the standard FTP port. -Port 21 - -# Umask 022 is a good standard umask to prevent new dirs and files -# from being group and world writable. -Umask 022 - -# Note that this ONLY works in standalone mode, in inetd mode you should use an -# inetd server that allows you to limit maximum number of processes per service -# (such as inetd). -MaxInstances 5 - -# Set the user and group under which the server will run. -User nobody -Group nogroup - -# To cause every FTP user to be "jailed" (chrooted) into their home -# directory, uncomment this line. -#DefaultRoot ~ - -# Normally, we want files to be overwriteable. -AllowOverwrite on - -# Deny use of SITE CHMOD, uncomment the three lines below. -#<Limit SITE_CHMOD> -# DenyAll -#</Limit> diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/protocols b/target/device/Atmel/atstk100x/target_skeleton/etc/protocols deleted file mode 100644 index 1521f3980..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/protocols +++ /dev/null @@ -1,149 +0,0 @@ -# /etc/protocols: -# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $ -# -# Internet (IP) protocols -# -# from: @(#)protocols 5.1 (Berkeley) 4/17/89 -# -# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992). -# -# See also http://www.iana.org/assignments/protocol-numbers - -ip 0 IP # internet protocol, pseudo protocol number -#hopopt 0 HOPOPT # hop-by-hop options for ipv6 -icmp 1 ICMP # internet control message protocol -igmp 2 IGMP # internet group management protocol -ggp 3 GGP # gateway-gateway protocol -ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'') -st 5 ST # ST datagram mode -tcp 6 TCP # transmission control protocol -cbt 7 CBT # CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk> -egp 8 EGP # exterior gateway protocol -igp 9 IGP # any private interior gateway (Cisco: for IGRP) -bbn-rcc 10 BBN-RCC-MON # BBN RCC Monitoring -nvp 11 NVP-II # Network Voice Protocol -pup 12 PUP # PARC universal packet protocol -argus 13 ARGUS # ARGUS -emcon 14 EMCON # EMCON -xnet 15 XNET # Cross Net Debugger -chaos 16 CHAOS # Chaos -udp 17 UDP # user datagram protocol -mux 18 MUX # Multiplexing protocol -dcn 19 DCN-MEAS # DCN Measurement Subsystems -hmp 20 HMP # host monitoring protocol -prm 21 PRM # packet radio measurement protocol -xns-idp 22 XNS-IDP # Xerox NS IDP -trunk-1 23 TRUNK-1 # Trunk-1 -trunk-2 24 TRUNK-2 # Trunk-2 -leaf-1 25 LEAF-1 # Leaf-1 -leaf-2 26 LEAF-2 # Leaf-2 -rdp 27 RDP # "reliable datagram" protocol -irtp 28 IRTP # Internet Reliable Transaction Protocol -iso-tp4 29 ISO-TP4 # ISO Transport Protocol Class 4 -netblt 30 NETBLT # Bulk Data Transfer Protocol -mfe-nsp 31 MFE-NSP # MFE Network Services Protocol -merit-inp 32 MERIT-INP # MERIT Internodal Protocol -sep 33 SEP # Sequential Exchange Protocol -3pc 34 3PC # Third Party Connect Protocol -idpr 35 IDPR # Inter-Domain Policy Routing Protocol -xtp 36 XTP # Xpress Tranfer Protocol -ddp 37 DDP # Datagram Delivery Protocol -idpr-cmtp 38 IDPR-CMTP # IDPR Control Message Transport Proto -tp++ 39 TP++ # TP++ Transport Protocol -il 40 IL # IL Transport Protocol -ipv6 41 IPv6 # IPv6 -sdrp 42 SDRP # Source Demand Routing Protocol -ipv6-route 43 IPv6-Route # Routing Header for IPv6 -ipv6-frag 44 IPv6-Frag # Fragment Header for IPv6 -idrp 45 IDRP # Inter-Domain Routing Protocol -rsvp 46 RSVP # Resource ReSerVation Protocol -gre 47 GRE # Generic Routing Encapsulation -mhrp 48 MHRP # Mobile Host Routing Protocol -bna 49 BNA # BNA -ipv6-crypt 50 IPv6-Crypt # Encryption Header for IPv6 -ipv6-auth 51 IPv6-Auth # Authentication Header for IPv6 -i-nlsp 52 I-NLSP # Integrated Net Layer Security TUBA -swipe 53 SWIPE # IP with Encryption -narp 54 NARP # NBMA Address Resolution Protocol -mobile 55 MOBILE # IP Mobility -tlsp 56 TLSP # Transport Layer Security Protocol -skip 57 SKIP # SKIP -ipv6-icmp 58 IPv6-ICMP # ICMP for IPv6 -ipv6-nonxt 59 IPv6-NoNxt # No Next Header for IPv6 -ipv6-opts 60 IPv6-Opts # Destination Options for IPv6 -# 61 # any host internal protocol -cftp 62 CFTP # CFTP -# 63 # any local network -sat-expak 64 SAT-EXPAK # SATNET and Backroom EXPAK -kryptolan 65 KRYPTOLAN # Kryptolan -rvd 66 RVD # MIT Remote Virtual Disk Protocol -ippc 67 IPPC # Internet Pluribus Packet Core -# 68 # any distributed file system -sat-mon 69 SAT-MON # SATNET Monitoring -visa 70 VISA # VISA Protocol -ipcv 71 IPCV # Internet Packet Core Utility -cpnx 72 CPNX # Computer Protocol Network Executive -cphb 73 CPHB # Computer Protocol Heart Beat -wsn 74 WSN # Wang Span Network -pvp 75 PVP # Packet Video Protocol -br-sat-mon 76 BR-SAT-MON # Backroom SATNET Monitoring -sun-nd 77 SUN-ND # SUN ND PROTOCOL-Temporary -wb-mon 78 WB-MON # WIDEBAND Monitoring -wb-expak 79 WB-EXPAK # WIDEBAND EXPAK -iso-ip 80 ISO-IP # ISO Internet Protocol -vmtp 81 VMTP # Versatile Message Transport -secure-vmtp 82 SECURE-VMTP # SECURE-VMTP -vines 83 VINES # VINES -ttp 84 TTP # TTP -nsfnet-igp 85 NSFNET-IGP # NSFNET-IGP -dgp 86 DGP # Dissimilar Gateway Protocol -tcf 87 TCF # TCF -eigrp 88 EIGRP # Enhanced Interior Routing Protocol (Cisco) -ospf 89 OSPFIGP # Open Shortest Path First IGP -sprite-rpc 90 Sprite-RPC # Sprite RPC Protocol -larp 91 LARP # Locus Address Resolution Protocol -mtp 92 MTP # Multicast Transport Protocol -ax.25 93 AX.25 # AX.25 Frames -ipip 94 IPIP # Yet Another IP encapsulation -micp 95 MICP # Mobile Internetworking Control Pro. -scc-sp 96 SCC-SP # Semaphore Communications Sec. Pro. -etherip 97 ETHERIP # Ethernet-within-IP Encapsulation -encap 98 ENCAP # Yet Another IP encapsulation -# 99 # any private encryption scheme -gmtp 100 GMTP # GMTP -ifmp 101 IFMP # Ipsilon Flow Management Protocol -pnni 102 PNNI # PNNI over IP -pim 103 PIM # Protocol Independent Multicast -aris 104 ARIS # ARIS -scps 105 SCPS # SCPS -qnx 106 QNX # QNX -a/n 107 A/N # Active Networks -ipcomp 108 IPComp # IP Payload Compression Protocol -snp 109 SNP # Sitara Networks Protocol -compaq-peer 110 Compaq-Peer # Compaq Peer Protocol -ipx-in-ip 111 IPX-in-IP # IPX in IP -vrrp 112 VRRP # Virtual Router Redundancy Protocol -pgm 113 PGM # PGM Reliable Transport Protocol -# 114 # any 0-hop protocol -l2tp 115 L2TP # Layer Two Tunneling Protocol -ddx 116 DDX # D-II Data Exchange -iatp 117 IATP # Interactive Agent Transfer Protocol -stp 118 STP # Schedule Transfer -srp 119 SRP # SpectraLink Radio Protocol -uti 120 UTI # UTI -smp 121 SMP # Simple Message Protocol -sm 122 SM # SM -ptp 123 PTP # Performance Transparency Protocol -isis 124 ISIS # ISIS over IPv4 -fire 125 FIRE -crtp 126 CRTP # Combat Radio Transport Protocol -crdup 127 CRUDP # Combat Radio User Datagram -sscopmce 128 SSCOPMCE -iplt 129 IPLT -sps 130 SPS # Secure Packet Shield -pipe 131 PIPE # Private IP Encapsulation within IP -sctp 132 SCTP # Stream Control Transmission Protocol -fc 133 FC # Fibre Channel -# rsvp-e2e-ignore 134 RSVP-E2E-IGNORE -# 134-254 # Unassigned -# 255 # Reserved diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/resolv.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/resolv.conf deleted file mode 100644 index 71f6f9657..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -../tmp/resolv.conf
\ No newline at end of file diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/samba/smb.conf b/target/device/Atmel/atstk100x/target_skeleton/etc/samba/smb.conf deleted file mode 100644 index a29571894..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/samba/smb.conf +++ /dev/null @@ -1,287 +0,0 @@ -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options (perhaps too -# many!) most of which are not shown in this example -# -# For a step to step guide on installing, configuring and using samba, -# read the Samba-HOWTO-Collection. This may be obtained from: -# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf -# -# Many working examples of smb.conf files can be found in the -# Samba-Guide which is generated daily and can be downloaded from: -# http://www.samba.org/samba/docs/Samba-Guide.pdf -# -# Any line which starts with a ; (semi-colon) or a # (hash) -# is a comment and is ignored. In this example we will use a # -# for commentry and a ; for parts of the config file that you -# may wish to enable -# -# NOTE: Whenever you modify this file you should run the command "testparm" -# to check that you have not made any basic syntactic errors. -# -#======================= Global Settings ===================================== -[global] - -# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH - workgroup = AVR32 - -# Network name - netbios name = stk1000 - -# server string is the equivalent of the NT Description field - server string = AVR32 STK1000 development kit - -# Security mode. Defines in which mode Samba will operate. Possible -# values are share, user, server, domain and ads. Most people will want -# user level security. See the Samba-HOWTO-Collection for details. - security = user - -# This option is important for security. It allows you to restrict -# connections to machines which are on your local network. The -# following example restricts access to two C class networks and -# the "loopback" interface. For more examples of the syntax see -# the smb.conf man page - hosts allow = 10.0.0. 127. - -# If you want to automatically load your printer list rather -# than setting them up individually then you'll need this - load printers = no - -# you may wish to override the location of the printcap file -; printcap name = /etc/printcap - -# on SystemV system setting printcap name to lpstat should allow -# you to automatically obtain a printer list from the SystemV spool -# system -; printcap name = lpstat - -# It should not be necessary to specify the print system type unless -# it is non-standard. Currently supported print systems include: -# bsd, cups, sysv, plp, lprng, aix, hpux, qnx -; printing = cups - -# Uncomment this if you want a guest account, you must add this to /etc/passwd -# otherwise the user "nobody" is used -; guest account = pcguest - -# this tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - debug level = 1 - syslog = 0 - -# Put a capping on the size of the log files (in Kb). - max log size = 1000 - -# Use password server option only with security = server -# The argument list may include: -# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] -# or to auto-locate the domain controller/s -# password server = * -; password server = <NT-Server-Name> - -# Use the realm option only with security = ads -# Specifies the Active Directory realm the host is part of -; realm = MY_REALM - -# Backend to store user information in. New installations should -# use either tdbsam or ldapsam. smbpasswd is available for backwards -# compatibility. tdbsam requires no further configuration. - passdb backend = smbpasswd:/etc/samba/smbpasswd - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting. -# Note: Consider carefully the location in the configuration file of -# this line. The included file is read at that point. -; include = /usr/local/samba/lib/smb.conf.%m - -# Configure Samba to use multiple interfaces -# If you have multiple network interfaces then you must list them -# here. See the man page for details. - interfaces = lo eth0 - - socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 - -# Browser Control Options: -# set local master to no if you don't want Samba to become a master -# browser on your network. Otherwise the normal election rules apply - local master = yes - -# OS Level determines the precedence of this server in master browser -# elections. The default value should be reasonable - os level = 254 - -# Domain Master specifies Samba to be the Domain Master Browser. This -# allows Samba to collate browse lists between subnets. Don't use this -# if you already have a Windows NT domain controller doing this job - domain master = yes - -# Preferred Master causes Samba to force a local browser election on startup -# and gives it a slightly higher chance of winning the election - preferred master = yes - -# Enable this if you want Samba to be a domain logon server for -# Windows95 workstations. -; domain logons = yes - -# if you enable domain logons then you may want a per-machine or -# per user logon script -# run a specific logon batch file per workstation (machine) -; logon script = %m.bat -# run a specific logon batch file per username -; logon script = %U.bat - -# Where to store roving profiles (only for Win95 and WinNT) -# %L substitutes for this servers netbios name, %U is username -# You must uncomment the [Profiles] share below -; logon path = \\%L\Profiles\%U - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server -; wins support = yes - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# WINS Proxy - Tells Samba to answer name resolution queries on -# behalf of a non WINS capable client, for this to work there must be -# at least one WINS Server on the network. The default is NO. -; wins proxy = yes - -# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names -# via DNS nslookups. The default is NO. - dns proxy = no - -# These scripts are used on a domain controller or stand-alone -# machine to add or delete corresponding unix accounts -; add user script = /usr/sbin/useradd %u -; add group script = /usr/sbin/groupadd %g -; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u -; delete user script = /usr/sbin/userdel %u -; delete user from group script = /usr/sbin/deluser %u %g -; delete group script = /usr/sbin/groupdel %g - -# Unix charset on the filesystem - unix charset = iso8859-1 - -# Code page for the client -# client code page = 850 - -#============================ Share Definitions ============================== -[homes] - comment = Home Directories - browseable = no - writable = yes - -[netdisk] - comment = Network share on STK1000 - path = /media - read only = no - public = yes - -# Un-comment the following and create the netlogon directory for Domain Logons -; [netlogon] -; comment = Network Logon Service -; path = /usr/local/samba/lib/netlogon -; guest ok = yes -; writable = no -; share modes = no - - -# Un-comment the following to provide a specific roving profile share -# the default is to use the user's home directory -;[Profiles] -; path = /usr/local/samba/profiles -; browseable = no -; guest ok = yes - - -# NOTE: If you have a BSD-style print system there is no need to -# specifically define each individual printer -;[printers] -; comment = All Printers -; path = /usr/spool/samba -; browseable = no -# Set public = yes to allow user 'guest account' to print -; guest ok = no -; writable = no -; printable = yes - -# This one is useful for people to share files -;[tmp] -; comment = Temporary file space -; path = /tmp -; read only = no -; public = yes - -# A publicly accessible directory, but read only, except for people in -# the "staff" group -;[public] -; comment = Public Stuff -; path = /home/samba -; public = yes -; writable = yes -; printable = no -; write list = @staff - -# Other examples. -# -# A private printer, usable only by fred. Spool data will be placed in fred's -# home directory. Note that fred must have write access to the spool directory, -# wherever it is. -;[fredsprn] -; comment = Fred's Printer -; valid users = fred -; path = /homes/fred -; printer = freds_printer -; public = no -; writable = no -; printable = yes - -# A private directory, usable only by fred. Note that fred requires write -# access to the directory. -;[fredsdir] -; comment = Fred's Service -; path = /usr/somewhere/private -; valid users = fred -; public = no -; writable = yes -; printable = no - -# a service which has a different directory for each machine that connects -# this allows you to tailor configurations to incoming machines. You could -# also use the %U option to tailor it by user name. -# The %m gets replaced with the machine name that is connecting. -;[pchome] -; comment = PC Directories -; path = /usr/pc/%m -; public = no -; writable = yes - -# A publicly accessible directory, read/write to all users. Note that all files -# created in the directory by users will be owned by the default user, so -# any user with access can delete any other user's files. Obviously this -# directory must be writable by the default user. Another user could of course -# be specified, in which case all files would be owned by that user instead. -;[public] -; path = /usr/somewhere/else/public -; public = yes -; only guest = yes -; writable = yes -; printable = no - -# The following two entries demonstrate how to share a directory so that two -# users can place files there that will be owned by the specific users. In this -# setup, the directory should be writable by both users and should have the -# sticky bit set on it to prevent abuse. Obviously this could be extended to -# as many users as required. -;[myshare] -; comment = Mary's and Fred's stuff -; path = /usr/somewhere/shared -; valid users = mary fred -; public = no -; writable = yes -; printable = no -; create mask = 0765 diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/samba/smbpasswd b/target/device/Atmel/atstk100x/target_skeleton/etc/samba/smbpasswd deleted file mode 100644 index a3fe520d5..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/samba/smbpasswd +++ /dev/null @@ -1 +0,0 @@ -root:0:172DC9BBE870E1B6AAD3B435B51404EE:090A846DE05FDBC2D90864D49620FD7C:[U ]:LCT-4561C217: diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/services b/target/device/Atmel/atstk100x/target_skeleton/etc/services deleted file mode 100644 index e2ffd3df5..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/services +++ /dev/null @@ -1,2117 +0,0 @@ -# -# Network services, Internet style -# -# Note that it is presently the policy of IANA to assign a single well-known -# port number for both TCP and UDP; hence, most entries here have two entries -# even if the protocol doesn't support UDP operations. -# -# The latest IANA port assignments can be gotten from -# -# http://www.iana.org/assignments/port-numbers -# -# The Well Known Ports are those from 0 through 1023. -# The Registered Ports are those from 1024 through 49151 -# The Dynamic and/or Private Ports are those from 49152 through 65535 -# -# Kerberos services are for Kerberos v4, and are unofficial. Sites running -# v5 should uncomment v5 entries and comment v4 entries. -# -# $FreeBSD: src/etc/services,v 1.102.8.1 2006/01/29 11:32:48 maxim Exp $ -# From: @(#)services 5.8 (Berkeley) 5/9/91 -# -# WELL KNOWN PORT NUMBERS -# -rtmp 1/ddp #Routing Table Maintenance Protocol -tcpmux 1/tcp #TCP Port Service Multiplexer -tcpmux 1/udp #TCP Port Service Multiplexer -nbp 2/ddp #Name Binding Protocol -compressnet 2/tcp #Management Utility -compressnet 2/udp #Management Utility -compressnet 3/tcp #Compression Process -compressnet 3/udp #Compression Process -echo 4/ddp #AppleTalk Echo Protocol -rje 5/tcp #Remote Job Entry -rje 5/udp #Remote Job Entry -zip 6/ddp #Zone Information Protocol -echo 7/tcp -echo 7/udp -discard 9/tcp sink null -discard 9/udp sink null -systat 11/tcp users #Active Users -systat 11/udp users #Active Users -daytime 13/tcp -daytime 13/udp -qotd 17/tcp quote #Quote of the Day -qotd 17/udp quote #Quote of the Day -msp 18/tcp #Message Send Protocol -msp 18/udp #Message Send Protocol -chargen 19/tcp ttytst source #Character Generator -chargen 19/udp ttytst source #Character Generator -ftp-data 20/tcp #File Transfer [Default Data] -ftp-data 20/udp #File Transfer [Default Data] -ftp 21/tcp #File Transfer [Control] -ftp 21/udp #File Transfer [Control] -ssh 22/tcp #Secure Shell Login -ssh 22/udp #Secure Shell Login -telnet 23/tcp -telnet 23/udp -# 24/tcp any private mail system -# 24/udp any private mail system -smtp 25/tcp mail #Simple Mail Transfer -smtp 25/udp mail #Simple Mail Transfer -nsw-fe 27/tcp #NSW User System FE -nsw-fe 27/udp #NSW User System FE -msg-icp 29/tcp #MSG ICP -msg-icp 29/udp #MSG ICP -msg-auth 31/tcp #MSG Authentication -msg-auth 31/udp #MSG Authentication -dsp 33/tcp #Display Support Protocol -dsp 33/udp #Display Support Protocol -# 35/tcp any private printer server -# 35/udp any private printer server -time 37/tcp timserver -time 37/udp timserver -rap 38/tcp #Route Access Protocol -rap 38/udp #Route Access Protocol -rlp 39/tcp resource #Resource Location Protocol -rlp 39/udp resource #Resource Location Protocol -graphics 41/tcp -graphics 41/udp -nameserver 42/tcp name #Host Name Server -nameserver 42/udp name #Host Name Server -nicname 43/tcp whois -nicname 43/udp whois -mpm-flags 44/tcp #MPM FLAGS Protocol -mpm-flags 44/udp #MPM FLAGS Protocol -mpm 45/tcp #Message Processing Module [recv] -mpm 45/udp #Message Processing Module [recv] -mpm-snd 46/tcp #MPM [default send] -mpm-snd 46/udp #MPM [default send] -ni-ftp 47/tcp #NI FTP -ni-ftp 47/udp #NI FTP -auditd 48/tcp #Digital Audit Daemon -auditd 48/udp #Digital Audit Daemon -tacacs 49/tcp #Login Host Protocol (TACACS) -tacacs 49/udp #Login Host Protocol (TACACS) -re-mail-ck 50/tcp #Remote Mail Checking Protocol -re-mail-ck 50/udp #Remote Mail Checking Protocol -la-maint 51/tcp #IMP Logical Address Maintenance -la-maint 51/udp #IMP Logical Address Maintenance -xns-time 52/tcp #XNS Time Protocol -xns-time 52/udp #XNS Time Protocol -domain 53/tcp #Domain Name Server -domain 53/udp #Domain Name Server -xns-ch 54/tcp #XNS Clearinghouse -xns-ch 54/udp #XNS Clearinghouse -isi-gl 55/tcp #ISI Graphics Language -isi-gl 55/udp #ISI Graphics Language -xns-auth 56/tcp #XNS Authentication -xns-auth 56/udp #XNS Authentication -mtp 57/tcp # deprecated -#PROBLEMS!============================================================== -# 57/tcp any private terminal access -#PROBLEMS!============================================================== -# 57/udp any private terminal access -xns-mail 58/tcp #XNS Mail -xns-mail 58/udp #XNS Mail -# 59/tcp any private file service -# 59/udp any private file service -ni-mail 61/tcp #NI MAIL -ni-mail 61/udp #NI MAIL -acas 62/tcp #ACA Services -acas 62/udp #ACA Services -whois++ 63/tcp -whois++ 63/udp -covia 64/tcp #Communications Integrator (CI) -covia 64/udp #Communications Integrator (CI) -tacacs-ds 65/tcp #TACACS-Database Service -tacacs-ds 65/udp #TACACS-Database Service -sql*net 66/tcp #Oracle SQL*NET -sql*net 66/udp #Oracle SQL*NET -bootps 67/tcp dhcps #Bootstrap Protocol Server -bootps 67/udp dhcps #Bootstrap Protocol Server -bootpc 68/tcp dhcpc #Bootstrap Protocol Client -bootpc 68/udp dhcpc #Bootstrap Protocol Client -tftp 69/tcp #Trivial File Transfer -tftp 69/udp #Trivial File Transfer -gopher 70/tcp -gopher 70/udp -netrjs-1 71/tcp #Remote Job Service -netrjs-1 71/udp #Remote Job Service -netrjs-2 72/tcp #Remote Job Service -netrjs-2 72/udp #Remote Job Service -netrjs-3 73/tcp #Remote Job Service -netrjs-3 73/udp #Remote Job Service -netrjs-4 74/tcp #Remote Job Service -netrjs-4 74/udp #Remote Job Service -# 75/tcp any private dial out service -# 75/udp any private dial out service -deos 76/tcp #Distributed External Object Store -deos 76/udp #Distributed External Object Store -netrjs 77/tcp -#PROBLEMS!============================================================== -# 77/tcp any private RJE service -#PROBLEMS!============================================================== -# 77/udp any private RJE service -vettcp 78/tcp -vettcp 78/udp -finger 79/tcp -finger 79/udp -http 80/tcp www www-http #World Wide Web HTTP -http 80/udp www www-http #World Wide Web HTTP -hosts2-ns 81/tcp #HOSTS2 Name Server -hosts2-ns 81/udp #HOSTS2 Name Server -xfer 82/tcp #XFER Utility -xfer 82/udp #XFER Utility -mit-ml-dev 83/tcp #MIT ML Device -mit-ml-dev 83/udp #MIT ML Device -ctf 84/tcp #Common Trace Facility -ctf 84/udp #Common Trace Facility -mit-ml-dev 85/tcp #MIT ML Device -mit-ml-dev 85/udp #MIT ML Device -mfcobol 86/tcp #Micro Focus Cobol -mfcobol 86/udp #Micro Focus Cobol -ttylink 87/tcp -#PROBLEMS!=========================================================== -# 87/tcp any private terminal link -#PROBLEMS!=========================================================== -# 87/udp any private terminal link -kerberos-sec 88/tcp kerberos # krb5 # Kerberos (v5) -kerberos-sec 88/udp kerberos # krb5 # Kerberos (v5) -su-mit-tg 89/tcp #SU/MIT Telnet Gateway -su-mit-tg 89/udp #SU/MIT Telnet Gateway -dnsix 90/tcp #DNSIX Securit Attribute Token Map -dnsix 90/udp #DNSIX Securit Attribute Token Map -mit-dov 91/tcp #MIT Dover Spooler -mit-dov 91/udp #MIT Dover Spooler -npp 92/tcp #Network Printing Protocol -npp 92/udp #Network Printing Protocol -dcp 93/tcp #Device Control Protocol -dcp 93/udp #Device Control Protocol -objcall 94/tcp #Tivoli Object Dispatcher -objcall 94/udp #Tivoli Object Dispatcher -supdup 95/tcp -supdup 95/udp -dixie 96/tcp #DIXIE Protocol Specification -dixie 96/udp #DIXIE Protocol Specification -swift-rvf 97/tcp #Swift Remote Virtural File Protocol -swift-rvf 97/udp #Swift Remote Virtural File Protocol -tacnews 98/tcp #TAC News, Unofficial: Red Hat linuxconf -tacnews 98/udp #TAC News, Unofficial: Red Hat linuxconf -metagram 99/tcp #Metagram Relay -metagram 99/udp #Metagram Relay -newacct 100/tcp #[unauthorized use] -hostname 101/tcp hostnames #NIC Host Name Server -hostname 101/udp hostnames #NIC Host Name Server -iso-tsap 102/tcp tsap #ISO-TSAP Class 0 -iso-tsap 102/udp tsap #ISO-TSAP Class 0 -gppitnp 103/tcp #Genesis Point-to-Point Trans Net -gppitnp 103/udp #Genesis Point-to-Point Trans Net -acr-nema 104/tcp #ACR-NEMA Digital Imag. & Comm. 300 -acr-nema 104/udp #ACR-NEMA Digital Imag. & Comm. 300 -csnet-ns 105/tcp cso-ns cso #Mailbox Name Nameserver -csnet-ns 105/udp cso-ns cso #Mailbox Name Nameserver -pop3pw 106/tcp 3com-tsmux #Eudora compatible PW changer -3com-tsmux 106/udp -rtelnet 107/tcp #Remote Telnet Service -rtelnet 107/udp #Remote Telnet Service -snagas 108/tcp #SNA Gateway Access Server -snagas 108/udp #SNA Gateway Access Server -pop2 109/tcp postoffice #Post Office Protocol - Version 2 -pop2 109/udp postoffice #Post Office Protocol - Version 2 -pop3 110/tcp #Post Office Protocol - Version 3 -pop3 110/udp #Post Office Protocol - Version 3 -sunrpc 111/tcp rpcbind #SUN Remote Procedure Call -sunrpc 111/udp rpcbind #SUN Remote Procedure Call -mcidas 112/tcp #McIDAS Data Transmission Protocol -mcidas 112/udp #McIDAS Data Transmission Protocol -auth 113/tcp ident tap #Authentication Service -auth 113/udp ident tap #Authentication Service -audionews 114/tcp #Audio News Multicast -audionews 114/udp #Audio News Multicast -sftp 115/tcp #Simple File Transfer Protocol -sftp 115/udp #Simple File Transfer Protocol -ansanotify 116/tcp #ANSA REX Notify -ansanotify 116/udp #ANSA REX Notify -uucp-path 117/tcp #UUCP Path Service -uucp-path 117/udp #UUCP Path Service -sqlserv 118/tcp #SQL Services -sqlserv 118/udp #SQL Services -nntp 119/tcp usenet #Network News Transfer Protocol -nntp 119/udp usenet #Network News Transfer Protocol -cfdptkt 120/tcp -cfdptkt 120/udp -erpc 121/tcp #Encore Expedited Remote Pro.Call -erpc 121/udp #Encore Expedited Remote Pro.Call -smakynet 122/tcp -smakynet 122/udp -ntp 123/tcp #Network Time Protocol -ntp 123/udp #Network Time Protocol -ansatrader 124/tcp #ANSA REX Trader -ansatrader 124/udp #ANSA REX Trader -locus-map 125/tcp #Locus PC-Interface Net Map Ser -locus-map 125/udp #Locus PC-Interface Net Map Ser -unitary 126/tcp #Unisys Unitary Login -unitary 126/udp #Unisys Unitary Login -locus-con 127/tcp #Locus PC-Interface Conn Server -locus-con 127/udp #Locus PC-Interface Conn Server -gss-xlicen 128/tcp #GSS X License Verification -gss-xlicen 128/udp #GSS X License Verification -pwdgen 129/tcp #Password Generator Protocol -pwdgen 129/udp #Password Generator Protocol -cisco-fna 130/tcp #cisco FNATIVE -cisco-fna 130/udp #cisco FNATIVE -cisco-tna 131/tcp #cisco TNATIVE -cisco-tna 131/udp #cisco TNATIVE -cisco-sys 132/tcp #cisco SYSMAINT -cisco-sys 132/udp #cisco SYSMAINT -statsrv 133/tcp #Statistics Service -statsrv 133/udp #Statistics Service -ingres-net 134/tcp #INGRES-NET Service -ingres-net 134/udp #INGRES-NET Service -loc-srv 135/tcp epmap #Location Service -loc-srv 135/udp epmap #Location Service -profile 136/tcp #PROFILE Naming System -profile 136/udp #PROFILE Naming System -netbios-ns 137/tcp #NETBIOS Name Service -netbios-ns 137/udp #NETBIOS Name Service -netbios-dgm 138/tcp #NETBIOS Datagram Service -netbios-dgm 138/udp #NETBIOS Datagram Service -netbios-ssn 139/tcp #NETBIOS Session Service -netbios-ssn 139/udp #NETBIOS Session Service -emfis-data 140/tcp #EMFIS Data Service -emfis-data 140/udp #EMFIS Data Service -emfis-cntl 141/tcp #EMFIS Control Service -emfis-cntl 141/udp #EMFIS Control Service -bl-idm 142/tcp #Britton-Lee IDM -bl-idm 142/udp #Britton-Lee IDM -imap 143/tcp imap2 imap4 #Interim Mail Access Protocol v2 -imap 143/udp imap2 imap4 #Interim Mail Access Protocol v2 -NeWS 144/tcp # Window System -NeWS 144/udp # Window System -#PROBLEMS!============================================================== -#uma 144/tcp #Universal Management Architecture -#uma 144/udp #Universal Management Architecture -#PROBLEMS!============================================================== -uaac 145/tcp #UAAC Protocol -uaac 145/udp #UAAC Protocol -iso-tp0 146/tcp -iso-tp0 146/udp -iso-ip 147/tcp -iso-ip 147/udp -cronus 148/tcp jargon #CRONUS-SUPPORT -cronus 148/udp jargon #CRONUS-SUPPORT -aed-512 149/tcp #AED 512 Emulation Service -aed-512 149/udp #AED 512 Emulation Service -sql-net 150/tcp -sql-net 150/udp -hems 151/tcp -hems 151/udp -bftp 152/tcp #Background File Transfer Program -bftp 152/udp #Background File Transfer Program -sgmp 153/tcp -sgmp 153/udp -netsc-prod 154/tcp -netsc-prod 154/udp -netsc-dev 155/tcp -netsc-dev 155/udp -sqlsrv 156/tcp #SQL Service -sqlsrv 156/udp #SQL Service -knet-cmp 157/tcp #KNET/VM Command/Message Protocol -knet-cmp 157/udp #KNET/VM Command/Message Protocol -pcmail-srv 158/tcp #PCMail Server -pcmail-srv 158/udp #PCMail Server -nss-routing 159/tcp -nss-routing 159/udp -sgmp-traps 160/tcp -sgmp-traps 160/udp -snmp 161/tcp -snmp 161/udp -snmptrap 162/tcp snmp-trap -snmptrap 162/udp snmp-trap -cmip-man 163/tcp #CMIP/TCP Manager -cmip-man 163/udp #CMIP/TCP Manager -cmip-agent 164/tcp #CMIP/TCP Agent -smip-agent 164/udp #CMIP/TCP Agent -xns-courier 165/tcp #Xerox -xns-courier 165/udp #Xerox -s-net 166/tcp #Sirius Systems -s-net 166/udp #Sirius Systems -namp 167/tcp -namp 167/udp -rsvd 168/tcp -rsvd 168/udp -send 169/tcp -send 169/udp -print-srv 170/tcp #Network PostScript -print-srv 170/udp #Network PostScript -multiplex 171/tcp #Network Innovations Multiplex -multiplex 171/udp #Network Innovations Multiplex -cl/1 172/tcp #Network Innovations CL/1 -cl/1 172/udp #Network Innovations CL/1 -xyplex-mux 173/tcp -xyplex-mux 173/udp -mailq 174/tcp -mailq 174/udp -vmnet 175/tcp -vmnet 175/udp -genrad-mux 176/tcp -genrad-mux 176/udp -xdmcp 177/tcp #X Display Manager Control Protocol -xdmcp 177/udp #X Display Manager Control Protocol -NextStep 178/tcp nextstep NeXTStep #NextStep Window Server -NextStep 178/udp nextstep NeXTStep #NextStep Window Server -bgp 179/tcp #Border Gateway Protocol -bgp 179/udp #Border Gateway Protocol -ris 180/tcp #Intergraph -ris 180/udp #Intergraph -unify 181/tcp -unify 181/udp -audit 182/tcp #Unisys Audit SITP -audit 182/udp #Unisys Audit SITP -ocbinder 183/tcp -ocbinder 183/udp -ocserver 184/tcp -ocserver 184/udp -remote-kis 185/tcp -remote-kis 185/udp -kis 186/tcp #KIS Protocol -kis 186/udp #KIS Protocol -aci 187/tcp #Application Communication Interface -aci 187/udp #Application Communication Interface -mumps 188/tcp #Plus Five's MUMPS -mumps 188/udp #Plus Five's MUMPS -qft 189/tcp #Queued File Transport -qft 189/udp #Queued File Transport -gacp 190/tcp #Gateway Access Control Protocol -gacp 190/udp cacp #Gateway Access Control Protocol -prospero 191/tcp #Prospero Directory Service -prospero 191/udp #Prospero Directory Service -osu-nms 192/tcp #OSU Network Monitoring System -osu-nms 192/udp #OSU Network Monitoring System -srmp 193/tcp #Spider Remote Monitoring Protocol -srmp 193/udp #Spider Remote Monitoring Protocol -irc 194/tcp #Internet Relay Chat Protocol -irc 194/udp #Internet Relay Chat Protocol -dn6-nlm-aud 195/tcp #DNSIX Network Level Module Audit -dn6-nlm-aud 195/udp #DNSIX Network Level Module Audit -dn6-smm-red 196/tcp #DNSIX Session Mgt Module Audit Redir -dn6-smm-red 196/udp #DNSIX Session Mgt Module Audit Redir -dls 197/tcp #Directory Location Service -dls 197/udp #Directory Location Service -dls-mon 198/tcp #Directory Location Service Monitor -dls-mon 198/udp #Directory Location Service Monitor -smux 199/tcp -smux 199/udp -src 200/tcp #IBM System Resource Controller -src 200/udp #IBM System Resource Controller -at-rtmp 201/tcp #AppleTalk Routing Maintenance -at-rtmp 201/udp #AppleTalk Routing Maintenance -at-nbp 202/tcp #AppleTalk Name Binding -at-nbp 202/udp #AppleTalk Name Binding -at-3 203/tcp #AppleTalk Unused -at-3 203/udp #AppleTalk Unused -at-echo 204/tcp #AppleTalk Echo -at-echo 204/udp #AppleTalk Echo -at-5 205/tcp #AppleTalk Unused -at-5 205/udp #AppleTalk Unused -at-zis 206/tcp #AppleTalk Zone Information -at-zis 206/udp #AppleTalk Zone Information -at-7 207/tcp #AppleTalk Unused -at-7 207/udp #AppleTalk Unused -at-8 208/tcp #AppleTalk Unused -at-8 208/udp #AppleTalk Unused -qmtp 209/tcp #The Quick Mail Transfer Protocol -qmtp 209/udp #The Quick Mail Transfer Protocol -#PROBLEMS!============================================================== -#tam 209/tcp #Trivial Authenticated Mail Protocol -#tam 209/udp #Trivial Authenticated Mail Protocol -#PROBLEMS!============================================================== -z39.50 210/tcp wais #ANSI Z39.50 -z39.50 210/udp wais #ANSI Z39.50 -914c/g 211/tcp #Texas Instruments 914C/G Terminal -914c/g 211/udp #Texas Instruments 914C/G Terminal -anet 212/tcp #ATEXSSTR -anet 212/udp #ATEXSSTR -ipx 213/tcp -ipx 213/udp -vmpwscs 214/tcp -vmpwscs 214/udp -softpc 215/tcp #Insignia Solutions -softpc 215/udp #Insignia Solutions -CAIlic 216/tcp atls #Computer Associates Int'l License Server -CAIlic 216/udp atls #Computer Associates Int'l License Server -dbase 217/tcp #dBASE Unix -dbase 217/udp #dBASE Unix -mpp 218/tcp #Netix Message Posting Protocol -mpp 218/udp #Netix Message Posting Protocol -uarps 219/tcp #Unisys ARPs -uarps 219/udp #Unisys ARPs -#imap3@220 was never used and never should have been allocated. See PR 46294. -#imap3 220/tcp #Interactive Mail Access Protocol v3 -#imap3 220/udp #Interactive Mail Access Protocol v3 -fln-spx 221/tcp #Berkeley rlogind with SPX auth -fln-spx 221/udp #Berkeley rlogind with SPX auth -rsh-spx 222/tcp #Berkeley rshd with SPX auth -rsh-spx 222/udp #Berkeley rshd with SPX auth -cdc 223/tcp #Certificate Distribution Center -cdc 223/udp #Certificate Distribution Center -direct 242/tcp -direct 242/udp -sur-meas 243/tcp #Survey Measurement -sur-meas 243/udp #Survey Measurement -dayna 244/tcp -dayna 244/udp -link 245/tcp -link 245/udp -dsp3270 246/tcp #Display Systems Protocol -dsp3270 246/udp #Display Systems Protocol -subntbcst_tftp 247/tcp #subntbcst_tftp -subntbcst_tftp 247/udp #subntbcst_tftp -bhfhs 248/tcp -bhfhs 248/udp -# 249-255 reserved -rap 256/tcp -rap 256/udp -set 257/tcp #secure electronic transaction -set 257/udp #secure electronic transaction -yak-chat 258/tcp #yak winsock personal chat -yak-chat 258/udp #yak winsock personal chat -esro-gen 259/tcp #efficient short remote operations -esro-gen 259/udp #efficient short remote operations -openport 260/tcp -openport 260/udp -nsiiops 261/tcp #iiop name service over tls/ssl -nsiiops 261/udp #iiop name service over tls/ssl -arcisdms 262/tcp -arcisdms 262/udp -hdap 263/tcp -hdap 263/udp -bgmp 264/tcp -bgmp 264/udp -# 265-279 unassigned -http-mgmt 280/tcp -http-mgmt 280/udp -personal-link 281/tcp -personal-link 281/udp -cableport-ax 282/tcp #cable port a/x -cableport-ax 282/udp #cable port a/x -# 283-307 unassigned -novastorbakcup 308/tcp #novastor backup -novastorbakcup 308/udp #novastor backup -entrusttime 309/tcp -entrusttime 309/udp -bhmds 310/tcp -bhmds 310/udp -asip-webadmin 311/tcp #appleshare ip webadmin -asip-webadmin 311/udp #appleshare ip webadmin -vslmp 312/tcp -vslmp 312/udp -magenta-logic 313/tcp -magenta-logic 313/udp -opalis-robot 314/tcp -opalis-robot 314/udp -dpsi 315/tcp -dpsi 315/udp -decauth 316/tcp -decauth 316/udp -zannet 317/tcp -zannet 317/udp -# 318-320 #unassigned -pip 321/tcp -pip 321/udp -# 322-343 #unassigned -pdap 344/tcp #Prospero Data Access Protocol -pdap 344/udp #Prospero Data Access Protocol -pawserv 345/tcp #Perf Analysis Workbench -pawserv 345/udp #Perf Analysis Workbench -zserv 346/tcp #Zebra server -zserv 346/udp #Zebra server -fatserv 347/tcp #Fatmen Server -fatserv 347/udp #Fatmen Server -csi-sgwp 348/tcp #Cabletron Management Protocol -csi-sgwp 348/udp #Cabletron Management Protocol -mftp 349/tcp -mftp 349/udp -matip-type-a 350/tcp #MATIP Type A -matip-type-a 350/udp -matip-type-b 351/tcp #MATIP Type B -matip-type-b 351/udp -bhoetty 351/tcp #unassigned but widespread use -bhoetty 351/udp #unassigned but widespread use -dtag-ste-sb 352/tcp #DTAG -dtag-ste-sb 352/udp #DTAG -bhoedap4 352/tcp #unassigned but widespread use -bhoedap4 352/udp #unassigned but widespread use -ndsauth 353/tcp -ndsauth 353/udp -bh611 354/tcp -bh611 354/udp -datex-asn 355/tcp -datex-asn 355/udp -cloanto-net-1 356/tcp #Cloanto Net 1 -cloanto-net-1 356/udp -bhevent 357/tcp -bhevent 357/udp -shrinkwrap 358/tcp -shrinkwrap 358/udp -tenebris_nts 359/tcp #Tenebris Network Trace Service -tenebris_nts 359/udp #Tenebris Network Trace Service -scoi2odialog 360/tcp -scoi2odialog 360/udp -semantix 361/tcp -semantix 361/udp -srssend 362/tcp #SRS Send -srssend 362/udp #SRS Send -rsvp_tunnel 363/tcp -rsvp_tunnel 363/udp -aurora-cmgr 364/tcp -aurora-cmgr 364/udp -dtk 365/tcp #Deception Tool Kit - Fred Cohen <fc@all.net> -dtk 365/udp #Deception Tool Kit - Fred Cohen <fc@all.net> -odmr 366/tcp -odmr 366/udp -mortgageware 367/tcp -mortgageware 367/udp -qbikgdp 368/tcp #QbikGDP -qbikgdp 368/udp -rpc2portmap 369/tcp -rpc2portmap 369/udp -codaauth2 370/tcp -codaauth2 370/udp -clearcase 371/tcp -clearcase 371/udp -ulistserv 372/tcp ulistproc #Unix Listserv -ulistserv 372/udp ulistproc #Unix Listserv -legent-1 373/tcp #Legent Corporation (now Computer Associates Intl.) -legent-1 373/udp #Legent Corporation (now Computer Associates Intl.) -legent-2 374/tcp #Legent Corporation (now Computer Associates Intl.) -legent-2 374/udp #Legent Corporation (now Computer Associates Intl.) -hassle 375/tcp -hassle 375/udp -nip 376/tcp #Amiga Envoy Network Inquiry Proto -nip 376/udp #Amiga Envoy Network Inquiry Proto -tnETOS 377/tcp #NEC Corporation -tnETOS 377/udp #NEC Corporation -dsETOS 378/tcp #NEC Corporation -dsETOS 378/udp #NEC Corporation -is99c 379/tcp #TIA/EIA/IS-99 modem client -is99c 379/udp #TIA/EIA/IS-99 modem client -is99s 380/tcp #TIA/EIA/IS-99 modem server -is99s 380/udp #TIA/EIA/IS-99 modem server -hp-collector 381/tcp #hp performance data collector -hp-collector 381/udp #hp performance data collector -hp-managed-node 382/tcp #hp performance data managed node -hp-managed-node 382/udp #hp performance data managed node -hp-alarm-mgr 383/tcp #hp performance data alarm manager -hp-alarm-mgr 383/udp #hp performance data alarm manager -arns 384/tcp #A Remote Network Server System -arns 384/udp #A Remote Network Server System -ibm-app 385/tcp #IBM Application -ibm-app 385/udp #IBM Application -asa 386/tcp #ASA Message Router Object Def. -asa 386/udp #ASA Message Router Object Def. -aurp 387/tcp #Appletalk Update-Based Routing Pro. -aurp 387/udp #Appletalk Update-Based Routing Pro. -unidata-ldm 388/tcp #Unidata LDM Version 4 -unidata-ldm 388/udp #Unidata LDM Version 4 -ldap 389/tcp #Lightweight Directory Access Protocol -ldap 389/udp #Lightweight Directory Access Protocol -uis 390/tcp -uis 390/udp -synotics-relay 391/tcp #SynOptics SNMP Relay Port -synotics-relay 391/udp #SynOptics SNMP Relay Port -synotics-broker 392/tcp #SynOptics Port Broker Port -synotics-broker 392/udp #SynOptics Port Broker Port -dis 393/tcp #Data Interpretation System -dis 393/udp #Data Interpretation System -embl-ndt 394/tcp #EMBL Nucleic Data Transfer -embl-ndt 394/udp #EMBL Nucleic Data Transfer -netcp 395/tcp #NETscout Control Protocol -netcp 395/udp #NETscout Control Protocol -netware-ip 396/tcp #Novell Netware over IP -netware-ip 396/udp #Novell Netware over IP -mptn 397/tcp #Multi Protocol Trans. Net. -mptn 397/udp #Multi Protocol Trans. Net. -kryptolan 398/tcp -kryptolan 398/udp -iso-tsap-c2 399/tcp #ISO-TSAP Class 2 -iso-tsap-c2 399/udp #ISO-TSAP Class 2 -work-sol 400/tcp #Workstation Solutions -work-sol 400/udp #Workstation Solutions -ups 401/tcp #Uninterruptible Power Supply -ups 401/udp #Uninterruptible Power Supply -genie 402/tcp #Genie Protocol -genie 402/udp #Genie Protocol -decap 403/tcp -decap 403/udp -nced 404/tcp -nced 404/udp -ncld 405/tcp -ncld 405/udp -imsp 406/tcp #Interactive Mail Support Protocol -imsp 406/udp #Interactive Mail Support Protocol -timbuktu 407/tcp -timbuktu 407/udp -prm-sm 408/tcp #Prospero Resource Manager Sys. Man. -prm-sm 408/udp #Prospero Resource Manager Sys. Man. -prm-nm 409/tcp #Prospero Resource Manager Node Man. -prm-nm 409/udp #Prospero Resource Manager Node Man. -decladebug 410/tcp #DECLadebug Remote Debug Protocol -decladebug 410/udp #DECLadebug Remote Debug Protocol -rmt 411/tcp #Remote MT Protocol -rmt 411/udp #Remote MT Protocol -synoptics-trap 412/tcp #Trap Convention Port -synoptics-trap 412/udp #Trap Convention Port -smsp 413/tcp -smsp 413/udp -infoseek 414/tcp -infoseek 414/udp -bnet 415/tcp -bnet 415/udp -silverplatter 416/tcp -silverplatter 416/udp -onmux 417/tcp -onmux 417/udp -hyper-g 418/tcp -hyper-g 418/udp -ariel1 419/tcp -ariel1 419/udp -smpte 420/tcp -smpte 420/udp -ariel2 421/tcp -ariel2 421/udp -ariel3 422/tcp -ariel3 422/udp -opc-job-start 423/tcp #IBM Operations Planning and Control Start -opc-job-start 423/udp #IBM Operations Planning and Control Start -opc-job-track 424/tcp #IBM Operations Planning and Control Track -opc-job-track 424/udp #IBM Operations Planning and Control Track -icad-el 425/tcp -icad-el 425/udp -smartsdp 426/tcp -smartsdp 426/udp -svrloc 427/tcp #Server Location -svrloc 427/udp #Server Location -ocs_cmu 428/tcp -ocs_cmu 428/udp -ocs_amu 429/tcp -ocs_amu 429/udp -utmpsd 430/tcp -utmpsd 430/udp -utmpcd 431/tcp -utmpcd 431/udp -iasd 432/tcp -iasd 432/udp -nnsp 433/tcp -nnsp 433/udp -mobileip-agent 434/tcp -mobileip-agent 434/udp -mobilip-mn 435/tcp -mobilip-mn 435/udp -dna-cml 436/tcp -dna-cml 436/udp -comscm 437/tcp -comscm 437/udp -dsfgw 438/tcp -dsfgw 438/udp -dasp 439/tcp -dasp 439/udp -sgcp 440/tcp -sgcp 440/udp -decvms-sysmgt 441/tcp -decvms-sysmgt 441/udp -cvc_hostd 442/tcp -cvc_hostd 442/udp -https 443/tcp -https 443/udp -snpp 444/tcp #Simple Network Paging Protocol -snpp 444/udp #Simple Network Paging Protocol -# [RFC1568] -microsoft-ds 445/tcp -microsoft-ds 445/udp -ddm-rdb 446/tcp -ddm-rdb 446/udp -ddm-dfm 447/tcp -ddm-dfm 447/udp -ddm-ssl 448/tcp ddm-byte -ddm-ssl 448/udp ddm-byte -as-servermap 449/tcp #AS Server Mapper -as-servermap 449/udp #AS Server Mapper -tserver 450/tcp -tserver 450/udp -sfs-smp-net 451/tcp #Cray Network Semaphore server -sfs-smp-net 451/udp #Cray Network Semaphore server -sfs-config 452/tcp #Cray SFS config server -sfs-config 452/udp #Cray SFS config server -creativeserver 453/tcp #CreativeServer -creativeserver 453/udp #CreativeServer -contentserver 454/tcp #ContentServer -contentserver 454/udp #ContentServer -creativepartnr 455/tcp #CreativePartnr -creativepartnr 455/udp #CreativePartnr -macon-tcp 456/tcp -macon-udp 456/udp -scohelp 457/tcp -scohelp 457/udp -appleqtc 458/tcp #apple quick time -appleqtc 458/udp #apple quick time -ampr-rcmd 459/tcp -ampr-rcmd 459/udp -skronk 460/tcp -skronk 460/udp -datasurfsrv 461/tcp -datasurfsrv 461/udp -datasurfsrvsec 462/tcp -datasurfsrvsec 462/udp -alpes 463/tcp -alpes 463/udp -# -kpasswd5 464/tcp # Kerberos (v5) -kpasswd5 464/udp # Kerberos (v5) -#PROBLEMS!============================================================== -# IANA has offically assigned these two ports as ``kpasswd'' -#kpasswd 464/tcp # Kerberos (v5) -#kpasswd 464/udp # Kerberos (v5) -#PROBLEMS!============================================================== -smtps 465/tcp #smtp protocol over TLS/SSL (was ssmtp) -smtps 465/udp #smtp protocol over TLS/SSL (was ssmtp) -digital-vrc 466/tcp -digital-vrc 466/udp -mylex-mapd 467/tcp -mylex-mapd 467/udp -photuris 468/tcp -photuris 468/udp -rcp 469/tcp #Radio Control Protocol -rcp 469/udp #Radio Control Protocol -scx-proxy 470/tcp -scx-proxy 470/udp -mondex 471/tcp -mondex 471/udp -ljk-login 472/tcp -ljk-login 472/udp -hybrid-pop 473/tcp -hybrid-pop 473/udp -tn-tl-w1 474/tcp -tn-tl-w2 474/udp -tcpnethaspsrv 475/tcp -tcpnethaspsrv 475/udp -tn-tl-fd1 476/tcp -tn-tl-fd1 476/udp -ss7ns 477/tcp -ss7ns 477/udp -spsc 478/tcp -spsc 478/udp -iafserver 479/tcp -iafserver 479/udp -iafdbase 480/tcp -iafdbase 480/udp -ph 481/tcp -ph 481/udp -bgs-nsi 482/tcp -bgs-nsi 482/udp -ulpnet 483/tcp -ulpnet 483/udp -integra-sme 484/tcp #Integra Software Management Environment -integra-sme 484/udp #Integra Software Management Environment -powerburst 485/tcp #Air Soft Power Burst -powerburst 485/udp #Air Soft Power Burst -avian 486/tcp -avian 486/udp -saft 487/tcp #saft Simple Asynchronous File Transfer -saft 487/udp #saft Simple Asynchronous File Transfer -gss-http 488/tcp -gss-http 488/udp -nest-protocol 489/tcp -nest-protocol 489/udp -micom-pfs 490/tcp -micom-pfs 490/udp -go-login 491/tcp -go-login 491/udp -ticf-1 492/tcp #Transport Independent Convergence for FNA -ticf-1 492/udp #Transport Independent Convergence for FNA -ticf-2 493/tcp #Transport Independent Convergence for FNA -ticf-2 493/udp #Transport Independent Convergence for FNA -pov-ray 494/tcp -pov-ray 494/udp -intecourier 495/tcp -intecourier 495/udp -pim-rp-disc 496/tcp -pim-rp-disc 496/udp -dantz 497/tcp -dantz 497/udp -siam 498/tcp -siam 498/udp -iso-ill 499/tcp #ISO ILL Protocol -iso-ill 499/udp #ISO ILL Protocol -isakmp 500/tcp -isakmp 500/udp -stmf 501/tcp -stmf 501/udp -asa-appl-proto 502/tcp -asa-appl-proto 502/udp -intrinsa 503/tcp -intrinsa 503/udp -citadel 504/tcp -citadel 504/udp -mailbox-lm 505/tcp -mailbox-lm 505/udp -ohimsrv 506/tcp -ohimsrv 506/udp -crs 507/tcp -crs 507/udp -xvttp 508/tcp -xvttp 508/udp -snare 509/tcp -snare 509/udp -fcp 510/tcp #FirstClass Protocol -fcp 510/udp #FirstClass Protocol -passgo 511/tcp -passgo 511/udp -# -# Berkeley-specific services -# -exec 512/tcp #remote process execution; -# authentication performed using -# passwords and UNIX login names -biff 512/udp comsat #used by mail system to notify users -# of new mail received; currently -# receives messages only from -# processes on the same machine -login 513/tcp #remote login a la telnet; -# automatic authentication performed -# based on priviledged port numbers -# and distributed data bases which -# identify "authentication domains" -who 513/udp whod #maintains data bases showing who's -# logged in to machines on a local -# net and the load average of the -# machine -shell 514/tcp cmd #like exec, but automatic -# authentication is performed as for -# login server -syslog 514/udp -printer 515/tcp spooler -printer 515/udp spooler -videotex 516/tcp -videotex 516/udp -talk 517/tcp #like tenex link, but across -# machine - unfortunately, doesn't -# use link protocol (this is actually -# just a rendezvous port from which a -# tcp connection is established) -talk 517/udp #like tenex link, but across -# machine - unfortunately, doesn't -# use link protocol (this is actually -# just a rendezvous port from which a -# tcp connection is established) -ntalk 518/tcp -ntalk 518/udp -utime 519/tcp unixtime -utime 519/udp unixtime -efs 520/tcp #extended file name server -router 520/udp route routed #local routing process (on site); -# uses variant of Xerox NS routing -# information protocol -ripng 521/tcp -ripng 521/udp -ulp 522/tcp -ulp 522/udp -ibm-db2 523/tcp -ibm-db2 523/udp -ncp 524/tcp -ncp 524/udp -timed 525/tcp timeserver -timed 525/udp timeserver -tempo 526/tcp newdate -tempo 526/udp newdate -stx 527/tcp #Stock IXChange -stx 527/udp #Stock IXChange -custix 528/tcp #Customer IXChange -custix 528/udp #Customer IXChange -irc-serv 529/tcp -irc-serv 529/udp -courier 530/tcp rpc -courier 530/udp rpc -conference 531/tcp chat -conference 531/udp chat -netnews 532/tcp readnews -netnews 532/udp readnews -netwall 533/tcp #for emergency broadcasts -netwall 533/udp #for emergency broadcasts -mm-admin 534/tcp #MegaMedia Admin -mm-admin 534/udp #MegaMedia Admin -iiop 535/tcp -iiop 535/udp -opalis-rdv 536/tcp -opalis-rdv 536/udp -nmsp 537/tcp #Networked Media Streaming Protocol -nmsp 537/udp #Networked Media Streaming Protocol -gdomap 538/tcp -gdomap 538/udp -apertus-ldp 539/tcp #Apertus Technologies Load Determination -apertus-ldp 539/udp #Apertus Technologies Load Determination -uucp 540/tcp uucpd -uucp 540/udp uucpd -uucp-rlogin 541/tcp -uucp-rlogin 541/udp -commerce 542/tcp -commerce 542/udp -klogin 543/tcp # Kerberos (v4/v5) -klogin 543/udp # Kerberos (v4/v5) -kshell 544/tcp krcmd # Kerberos (v4/v5) -kshell 544/udp krcmd # Kerberos (v4/v5) -appleqtcsrvr 545/tcp -appleqtcsrvr 545/udp -dhcpv6-client 546/tcp #DHCPv6 Client -dhcpv6-client 546/udp #DHCPv6 Client -dhcpv6-server 547/tcp #DHCPv6 Server -dhcpv6-server 547/udp #DHCPv6 Server -afpovertcp 548/tcp #AFP over TCP -afpovertcp 548/udp #AFP over TCP -idfp 549/tcp -idfp 549/udp -new-rwho 550/tcp new-who -new-rwho 550/udp new-who -cybercash 551/tcp -cybercash 551/udp -deviceshare 552/tcp -deviceshare 552/udp -pirp 553/tcp -pirp 553/udp -rtsp 554/tcp #Real Time Stream Control Protocol -rtsp 554/udp #Real Time Stream Control Protocol -dsf 555/tcp -dsf 555/udp -remotefs 556/tcp rfs rfs_server # Brunhoff remote filesystem -remotefs 556/udp rfs rfs_server # Brunhoff remote filesystem -openvms-sysipc 557/tcp -openvms-sysipc 557/udp -sdnskmp 558/tcp -sdnskmp 558/udp -teedtap 559/tcp -teedtap 559/udp -rmonitor 560/tcp rmonitord -rmonitor 560/udp rmonitord -monitor 561/tcp -monitor 561/udp -chshell 562/tcp chcmd -chshell 562/udp chcmd -nntps 563/tcp snntp #nntp protocol over TLS/SSL -nntps 563/udp snntp #nntp protocol over TLS/SSL -9pfs 564/tcp #plan 9 file service -9pfs 564/udp #plan 9 file service -whoami 565/tcp -whoami 565/udp -streettalk 566/tcp -banyan-rpc 567/tcp -banyan-rpc 567/udp -ms-shuttle 568/tcp #Microsoft shuttle -ms-shuttle 568/udp #Microsoft shuttle -ms-rome 569/tcp #Microsoft rome -ms-rome 569/udp #Microsoft rome -meter 570/tcp #demon -meter 570/udp #demon -umeter 571/tcp #udemon -umeter 571/udp #udemon -sonar 572/tcp -sonar 572/udp -banyan-vip 573/tcp -banyan-vip 573/udp -ftp-agent 574/tcp #FTP Software Agent System -ftp-agent 574/udp #FTP Software Agent System -vemmi 575/tcp -vemmi 575/udp -ipcd 576/tcp -ipcd 576/udp -vnas 577/tcp -vnas 577/udp -ipdd 578/tcp -ipdd 578/udp -decbsrv 579/tcp -decbsrv 579/udp -sntp-heartbeat 580/tcp -sntp-heartbeat 580/udp -bdp 581/tcp #Bundle Discovery Protocol -bdp 581/udp #Bundle Discovery Protocol -scc-security 582/tcp -scc-security 582/udp -philips-vc 583/tcp #Philips Video-Conferencing -philips-vc 583/udp #Philips Video-Conferencing -keyserver 584/tcp -keyserver 584/udp -#imap4-ssl@585 never should have been allocated. See PR 46294. -#imap4-ssl 585/tcp #IMAP4+SSL (use of 585 is not recommended, -#imap4-ssl 585/udp # use 993 instead) -password-chg 586/tcp -password-chg 586/udp -submission 587/tcp -submission 587/udp -cal 588/tcp -cal 588/udp -eyelink 589/tcp -eyelink 589/udp -tns-cml 590/tcp -tns-cml 590/udp -http-alt 591/tcp #FileMaker, Inc. - HTTP Alternate (see Port 80) -http-alt 591/udp #FileMaker, Inc. - HTTP Alternate (see Port 80) -eudora-set 592/tcp -eudora-set 592/udp -http-rpc-epmap 593/tcp #HTTP RPC Ep Map -http-rpc-epmap 593/udp #HTTP RPC Ep Map -tpip 594/tcp -tpip 594/udp -cab-protocol 595/tcp -cab-protocol 595/udp -smsd 596/tcp -smsd 596/udp -ptcnameservice 597/tcp #PTC Name Service -ptcnameservice 597/udp #PTC Name Service -sco-websrvrmg3 598/tcp #SCO Web Server Manager 3 -sco-websrvrmg3 598/udp #SCO Web Server Manager 3 -acp 599/tcp #Aeolon Core Protocol -acp 599/udp #Aeolon Core Protocol -ipcserver 600/tcp #Sun IPC server -ipcserver 600/udp #Sun IPC server -urm 606/tcp #Cray Unified Resource Manager -urm 606/udp #Cray Unified Resource Manager -nqs 607/tcp -nqs 607/udp -sift-uft 608/tcp #Sender-Initiated/Unsolicited File Transfer -sift-uft 608/udp #Sender-Initiated/Unsolicited File Transfer -npmp-trap 609/tcp -npmp-trap 609/udp -npmp-local 610/tcp -npmp-local 610/udp -npmp-gui 611/tcp -npmp-gui 611/udp -sshell 614/tcp #SSLshell -sshell 614/udp -ipp 631/tcp #IPP (Internet Printing Protocol) -ipp 631/udp #IPP (Internet Printing Protocol) -ginad 634/tcp -ginad 634/udp -ldaps 636/tcp sldap #ldap protocol over TLS/SSL -ldaps 636/udp sldap -aodv 654/tcp #Ad-Hoc On-Demand Distance Vector Routing Protocol -aodv 654/udp #Ad-Hoc On-Demand Distance Vector Routing Protocol -mdqs 666/tcp -mdqs 666/udp -#PROBLEMS!=============================================== -doom 666/tcp #doom Id Software -doom 666/udp #doom Id Software -#PROBLEMS!=============================================== -acap 674/tcp #Application Configuration Access Protocol -acap 674/udp #Application Configuration Access Protocol -elcsd 704/tcp #errlog copy/server daemon -elcsd 704/udp #errlog copy/server daemon -entrustmanager 709/tcp #EntrustManager -entrustmanager 709/udp #EntrustManager -netviewdm1 729/tcp #IBM NetView DM/6000 Server/Client -netviewdm1 729/udp #IBM NetView DM/6000 Server/Client -netviewdm2 730/tcp #IBM NetView DM/6000 send/tcp -netviewdm2 730/udp #IBM NetView DM/6000 send/tcp -netviewdm3 731/tcp #IBM NetView DM/6000 receive/tcp -netviewdm3 731/udp #IBM NetView DM/6000 receive/tcp -netgw 741/tcp -netgw 741/udp -netrcs 742/tcp #Network based Rev. Cont. Sys. -netrcs 742/udp #Network based Rev. Cont. Sys. -flexlm 744/tcp #Flexible License Manager -flexlm 744/udp #Flexible License Manager -fujitsu-dev 747/tcp #Fujitsu Device Control -fujitsu-dev 747/udp #Fujitsu Device Control -ris-cm 748/tcp #Russell Info Sci Calendar Manager -ris-cm 748/udp #Russell Info Sci Calendar Manager -kerberos-adm 749/tcp #Kerberos administration (v5) -kerberos-adm 749/udp #Kerberos administration (v5) -kerberos-iv 750/udp kdc # Kerberos (v4) -kerberos-iv 750/tcp kdc # Kerberos (v4) -#PROBLEMS!======================================================== -#rfile 750/tcp -#loadav 750/udp -#PROBLEMS!======================================================== -kerberos_master 751/tcp # Kerberos `kadmin' (v4) -kerberos_master 751/udp # Kerberos `kadmin' (v4) -#PROBLEMS!======================================================== -pump 751/tcp -pump 751/udp -#PROBLEMS!======================================================== -qrh 752/tcp -qrh 752/udp -rrh 753/tcp -rrh 753/udp -krb_prop 754/tcp krb5_prop # kerberos/v5 server propagation -#PROBLEMS!======================================================== -tell 754/tcp #send -#PROBLEMS!======================================================== -tell 754/udp #send -nlogin 758/tcp -nlogin 758/udp -con 759/tcp -con 759/udp -krbupdate 760/tcp kreg # Kerberos (v4) registration -#PROBLEMS!======================================================== -ns 760/tcp -#PROBLEMS!======================================================== -ns 760/udp -kpasswd 761/tcp kpwd # Kerberos (v4) "passwd" -#PROBLEMS!======================================================== -rxe 761/tcp -#PROBLEMS!======================================================== -rxe 761/udp -quotad 762/tcp -quotad 762/udp -cycleserv 763/tcp -cycleserv 763/udp -omserv 764/tcp -omserv 764/udp -webster 765/tcp -webster 765/udp -phonebook 767/tcp #phone -phonebook 767/udp #phone -vid 769/tcp -vid 769/udp -cadlock 770/tcp -cadlock 770/udp -rtip 771/tcp -rtip 771/udp -cycleserv2 772/tcp -cycleserv2 772/udp -submit 773/tcp -notify 773/udp -rpasswd 774/tcp -acmaint_dbd 774/udp -entomb 775/tcp -acmaint_transd 775/udp -wpages 776/tcp -wpages 776/udp -wpgs 780/tcp -wpgs 780/udp -concert 786/tcp -concert 786/udp -mdbs_daemon 800/tcp -mdbs_daemon 800/udp -device 801/tcp -device 801/udp -supfilesrv 871/tcp # for SUP -rsync 873/tcp -rsync 873/udp -accessbuilder 888/tcp -accessbuilder 888/udp -swat 901/tcp # samba web configuration tool -rndc 953/tcp # named's rndc control socket -ftps-data 989/tcp # ftp protocol, data, over TLS/SSL -ftps-data 989/udp -ftps 990/tcp # ftp protocol, control, over TLS/SSL -ftps 990/udp -telnets 992/tcp # telnet protocol over TLS/SSL -telnets 992/udp -imaps 993/tcp # imap4 protocol over TLS/SSL -imaps 993/udp -ircs 994/tcp # irc protocol over TLS/SSL -ircs 994/udp -pop3s 995/tcp spop3 # pop3 protocol over TLS/SSL -pop3s 995/udp spop3 -vsinet 996/tcp -vsinet 996/udp -maitrd 997/tcp -maitrd 997/udp -busboy 998/tcp -puparp 998/udp -garcon 999/tcp -applix 999/udp #Applix ac -puprouter 999/tcp -puprouter 999/udp -cadlock2 1000/tcp -cadlock2 1000/udp -# -# REGISTERED PORT NUMBERS -# -blackjack 1025/tcp #network blackjack -blackjack 1025/udp #network blackjack -iad1 1030/tcp #BBN IAD -iad1 1030/udp #BBN IAD -iad2 1031/tcp #BBN IAD -iad2 1031/udp #BBN IAD -iad3 1032/tcp #BBN IAD -iad3 1032/udp #BBN IAD -nim 1058/tcp -nim 1058/udp -nimreg 1059/tcp -nimreg 1059/udp -instl_boots 1067/tcp #Installation Bootstrap Proto. Serv. -instl_boots 1067/udp #Installation Bootstrap Proto. Serv. -instl_bootc 1068/tcp #Installation Bootstrap Proto. Cli. -instl_bootc 1068/udp #Installation Bootstrap Proto. Cli. -socks 1080/tcp -socks 1080/udp -ansoft-lm-1 1083/tcp #Anasoft License Manager -ansoft-lm-1 1083/udp #Anasoft License Manager -ansoft-lm-2 1084/tcp #Anasoft License Manager -ansoft-lm-2 1084/udp #Anasoft License Manager -webobjects 1085/tcp #Web Objects -webobjects 1085/udp #Web Objects -kpop 1109/tcp #Unofficial -kpop 1109/udp #Unofficial -nfsd-status 1110/tcp #Cluster status info -nfsd-keepalive 1110/udp #Client status info -supfiledbg 1127/tcp # for SUP -nfa 1155/tcp #Network File Access -nfa 1155/udp #Network File Access -phone 1167/udp #conference calling -skkserv 1178/tcp #SKK (kanji input) -lupa 1212/tcp -lupa 1212/udp -nerv 1222/tcp #SNI R&D network -nerv 1222/udp #SNI R&D network -hermes 1248/tcp -hermes 1248/udp -healthd 1281/tcp #healthd -healthd 1281/udp #healthd -alta-ana-lm 1346/tcp #Alta Analytics License Manager -alta-ana-lm 1346/udp #Alta Analytics License Manager -bbn-mmc 1347/tcp #multi media conferencing -bbn-mmc 1347/udp #multi media conferencing -bbn-mmx 1348/tcp #multi media conferencing -bbn-mmx 1348/udp #multi media conferencing -sbook 1349/tcp #Registration Network Protocol -sbook 1349/udp #Registration Network Protocol -editbench 1350/tcp #Registration Network Protocol -editbench 1350/udp #Registration Network Protocol -equationbuilder 1351/tcp #Digital Tool Works (MIT) -equationbuilder 1351/udp #Digital Tool Works (MIT) -lotusnote 1352/tcp #Lotus Note -lotusnote 1352/udp #Lotus Note -relief 1353/tcp #Relief Consulting -relief 1353/udp #Relief Consulting -rightbrain 1354/tcp #RightBrain Software -rightbrain 1354/udp #RightBrain Software -intuitive-edge 1355/tcp #Intuitive Edge -intuitive-edge 1355/udp #Intuitive Edge -cuillamartin 1356/tcp #CuillaMartin Company -cuillamartin 1356/udp #CuillaMartin Company -pegboard 1357/tcp #Electronic PegBoard -pegboard 1357/udp #Electronic PegBoard -connlcli 1358/tcp -connlcli 1358/udp -ftsrv 1359/tcp -ftsrv 1359/udp -mimer 1360/tcp -mimer 1360/udp -linx 1361/tcp -linx 1361/udp -timeflies 1362/tcp -timeflies 1362/udp -ndm-requester 1363/tcp #Network DataMover Requester -ndm-requester 1363/udp #Network DataMover Requester -ndm-server 1364/tcp #Network DataMover Server -ndm-server 1364/udp #Network DataMover Server -adapt-sna 1365/tcp #Network Software Associates -adapt-sna 1365/udp #Network Software Associates -netware-csp 1366/tcp #Novell NetWare Comm Service Platform -netware-csp 1366/udp #Novell NetWare Comm Service Platform -dcs 1367/tcp -dcs 1367/udp -screencast 1368/tcp -screencast 1368/udp -gv-us 1369/tcp #GlobalView to Unix Shell -gv-us 1369/udp #GlobalView to Unix Shell -us-gv 1370/tcp #Unix Shell to GlobalView -us-gv 1370/udp #Unix Shell to GlobalView -fc-cli 1371/tcp #Fujitsu Config Protocol -fc-cli 1371/udp #Fujitsu Config Protocol -fc-ser 1372/tcp #Fujitsu Config Protocol -fc-ser 1372/udp #Fujitsu Config Protocol -chromagrafx 1373/tcp -chromagrafx 1373/udp -molly 1374/tcp #EPI Software Systems -molly 1374/udp #EPI Software Systems -bytex 1375/tcp -bytex 1375/udp -ibm-pps 1376/tcp #IBM Person to Person Software -ibm-pps 1376/udp #IBM Person to Person Software -cichlid 1377/tcp #Cichlid License Manager -cichlid 1377/udp #Cichlid License Manager -elan 1378/tcp #Elan License Manager -elan 1378/udp #Elan License Manager -dbreporter 1379/tcp #Integrity Solutions -dbreporter 1379/udp #Integrity Solutions -telesis-licman 1380/tcp #Telesis Network License Manager -telesis-licman 1380/udp #Telesis Network License Manager -apple-licman 1381/tcp #Apple Network License Manager -apple-licman 1381/udp #Apple Network License Manager -#udt_os 1382/tcp -#udt_os 1382/udp -gwha 1383/tcp #GW Hannaway Network License Manager -gwha 1383/udp #GW Hannaway Network License Manager -os-licman 1384/tcp #Objective Solutions License Manager -os-licman 1384/udp #Objective Solutions License Manager -atex_elmd 1385/tcp #Atex Publishing License Manager -atex_elmd 1385/udp #Atex Publishing License Manager -checksum 1386/tcp #CheckSum License Manager -checksum 1386/udp #CheckSum License Manager -cadsi-lm 1387/tcp #Computer Aided Design Software Inc LM -cadsi-lm 1387/udp #Computer Aided Design Software Inc LM -objective-dbc 1388/tcp #Objective Solutions DataBase Cache -objective-dbc 1388/udp #Objective Solutions DataBase Cache -iclpv-dm 1389/tcp #Document Manager -iclpv-dm 1389/udp #Document Manager -iclpv-sc 1390/tcp #Storage Controller -iclpv-sc 1390/udp #Storage Controller -iclpv-sas 1391/tcp #Storage Access Server -iclpv-sas 1391/udp #Storage Access Server -iclpv-pm 1392/tcp #Print Manager -iclpv-pm 1392/udp #Print Manager -iclpv-nls 1393/tcp #Network Log Server -iclpv-nls 1393/udp #Network Log Server -iclpv-nlc 1394/tcp #Network Log Client -iclpv-nlc 1394/udp #Network Log Client -iclpv-wsm 1395/tcp #PC Workstation Manager software -iclpv-wsm 1395/udp #PC Workstation Manager software -dvl-activemail 1396/tcp #DVL Active Mail -dvl-activemail 1396/udp #DVL Active Mail -audio-activmail 1397/tcp #Audio Active Mail -audio-activmail 1397/udp #Audio Active Mail -video-activmail 1398/tcp #Video Active Mail -video-activmail 1398/udp #Video Active Mail -cadkey-licman 1399/tcp #Cadkey License Manager -cadkey-licman 1399/udp #Cadkey License Manager -cadkey-tablet 1400/tcp #Cadkey Tablet Daemon -cadkey-tablet 1400/udp #Cadkey Tablet Daemon -goldleaf-licman 1401/tcp #Goldleaf License Manager -goldleaf-licman 1401/udp #Goldleaf License Manager -prm-sm-np 1402/tcp #Prospero Resource Manager -prm-sm-np 1402/udp #Prospero Resource Manager -prm-nm-np 1403/tcp #Prospero Resource Manager -prm-nm-np 1403/udp #Prospero Resource Manager -igi-lm 1404/tcp #Infinite Graphics License Manager -igi-lm 1404/udp #Infinite Graphics License Manager -ibm-res 1405/tcp #IBM Remote Execution Starter -ibm-res 1405/udp #IBM Remote Execution Starter -netlabs-lm 1406/tcp #NetLabs License Manager -netlabs-lm 1406/udp #NetLabs License Manager -dbsa-lm 1407/tcp #DBSA License Manager -dbsa-lm 1407/udp #DBSA License Manager -sophia-lm 1408/tcp #Sophia License Manager -sophia-lm 1408/udp #Sophia License Manager -here-lm 1409/tcp #Here License Manager -here-lm 1409/udp #Here License Manager -hiq 1410/tcp #HiQ License Manager -hiq 1410/udp #HiQ License Manager -af 1411/tcp #AudioFile -af 1411/udp #AudioFile -innosys 1412/tcp -innosys 1412/udp -innosys-acl 1413/tcp -innosys-acl 1413/udp -ibm-mqseries 1414/tcp #IBM MQSeries -ibm-mqseries 1414/udp #IBM MQSeries -dbstar 1415/tcp -dbstar 1415/udp -novell-lu6.2 1416/tcp #Novell LU6.2 -novell-lu6.2 1416/udp #Novell LU6.2 -timbuktu-srv1 1417/tcp #Timbuktu Service 1 Port -timbuktu-srv1 1417/udp #Timbuktu Service 1 Port -timbuktu-srv2 1418/tcp #Timbuktu Service 2 Port -timbuktu-srv2 1418/udp #Timbuktu Service 2 Port -timbuktu-srv3 1419/tcp #Timbuktu Service 3 Port -timbuktu-srv3 1419/udp #Timbuktu Service 3 Port -timbuktu-srv4 1420/tcp #Timbuktu Service 4 Port -timbuktu-srv4 1420/udp #Timbuktu Service 4 Port -gandalf-lm 1421/tcp #Gandalf License Manager -gandalf-lm 1421/udp #Gandalf License Manager -autodesk-lm 1422/tcp #Autodesk License Manager -autodesk-lm 1422/udp #Autodesk License Manager -essbase 1423/tcp #Essbase Arbor Software -essbase 1423/udp #Essbase Arbor Software -hybrid 1424/tcp #Hybrid Encryption Protocol -hybrid 1424/udp #Hybrid Encryption Protocol -zion-lm 1425/tcp #Zion Software License Manager -zion-lm 1425/udp #Zion Software License Manager -sas-1 1426/tcp #Satellite-data Acquisition System 1 -sas-1 1426/udp #Satellite-data Acquisition System 1 -mloadd 1427/tcp #mloadd monitoring tool -mloadd 1427/udp #mloadd monitoring tool -informatik-lm 1428/tcp #Informatik License Manager -informatik-lm 1428/udp #Informatik License Manager -nms 1429/tcp #Hypercom NMS -nms 1429/udp #Hypercom NMS -tpdu 1430/tcp #Hypercom TPDU -tpdu 1430/udp #Hypercom TPDU -rgtp 1431/tcp #Reverse Gossip Transport -rgtp 1431/udp #Reverse Gossip Transport -blueberry-lm 1432/tcp #Blueberry Software License Manager -blueberry-lm 1432/udp #Blueberry Software License Manager -ms-sql-s 1433/tcp #Microsoft-SQL-Server -ms-sql-s 1433/udp #Microsoft-SQL-Server -ms-sql-m 1434/tcp #Microsoft-SQL-Monitor -ms-sql-m 1434/udp #Microsoft-SQL-Monitor -ibm-cics 1435/tcp -ibm-cics 1435/udp -sas-2 1436/tcp #Satellite-data Acquisition System 2 -sas-2 1436/udp #Satellite-data Acquisition System 2 -tabula 1437/tcp -tabula 1437/udp -eicon-server 1438/tcp #Eicon Security Agent/Server -eicon-server 1438/udp #Eicon Security Agent/Server -eicon-x25 1439/tcp #Eicon X25/SNA Gateway -eicon-x25 1439/udp #Eicon X25/SNA Gateway -eicon-slp 1440/tcp #Eicon Service Location Protocol -eicon-slp 1440/udp #Eicon Service Location Protocol -cadis-1 1441/tcp #Cadis License Management -cadis-1 1441/udp #Cadis License Management -cadis-2 1442/tcp #Cadis License Management -cadis-2 1442/udp #Cadis License Management -ies-lm 1443/tcp #Integrated Engineering Software -ies-lm 1443/udp #Integrated Engineering Software -marcam-lm 1444/tcp #Marcam License Management -marcam-lm 1444/udp #Marcam License Management -proxima-lm 1445/tcp #Proxima License Manager -proxima-lm 1445/udp #Proxima License Manager -ora-lm 1446/tcp #Optical Research Associates License Manager -ora-lm 1446/udp #Optical Research Associates License Manager -apri-lm 1447/tcp #Applied Parallel Research LM -apri-lm 1447/udp #Applied Parallel Research LM -oc-lm 1448/tcp #OpenConnect License Manager -oc-lm 1448/udp #OpenConnect License Manager -peport 1449/tcp -peport 1449/udp -dwf 1450/tcp #Tandem Distributed Workbench Facility -dwf 1450/udp #Tandem Distributed Workbench Facility -infoman 1451/tcp #IBM Information Management -infoman 1451/udp #IBM Information Management -gtegsc-lm 1452/tcp #GTE Government Systems License Man -gtegsc-lm 1452/udp #GTE Government Systems License Man -genie-lm 1453/tcp #Genie License Manager -genie-lm 1453/udp #Genie License Manager -interhdl_elmd 1454/tcp #interHDL License Manager -interhdl_elmd 1454/udp #interHDL License Manager -esl-lm 1455/tcp #ESL License Manager -esl-lm 1455/udp #ESL License Manager -dca 1456/tcp -dca 1456/udp -valisys-lm 1457/tcp #Valisys License Manager -valisys-lm 1457/udp #Valisys License Manager -nrcabq-lm 1458/tcp #Nichols Research Corp. -nrcabq-lm 1458/udp #Nichols Research Corp. -proshare1 1459/tcp #Proshare Notebook Application -proshare1 1459/udp #Proshare Notebook Application -proshare2 1460/tcp #Proshare Notebook Application -proshare2 1460/udp #Proshare Notebook Application -ibm_wrless_lan 1461/tcp #IBM Wireless LAN -ibm_wrless_lan 1461/udp #IBM Wireless LAN -world-lm 1462/tcp #World License Manager -world-lm 1462/udp #World License Manager -nucleus 1463/tcp -nucleus 1463/udp -msl_lmd 1464/tcp #MSL License Manager -msl_lmd 1464/udp #MSL License Manager -pipes 1465/tcp #Pipes Platform -pipes 1465/udp #Pipes Platform mfarlin@peerlogic.com -oceansoft-lm 1466/tcp #Ocean Software License Manager -oceansoft-lm 1466/udp #Ocean Software License Manager -csdmbase 1467/tcp -csdmbase 1467/udp -csdm 1468/tcp -csdm 1468/udp -aal-lm 1469/tcp #Active Analysis Limited License Manager -aal-lm 1469/udp #Active Analysis Limited License Manager -uaiact 1470/tcp #Universal Analytics -uaiact 1470/udp #Universal Analytics -csdmbase 1471/tcp -csdmbase 1471/udp -csdm 1472/tcp -csdm 1472/udp -openmath 1473/tcp -openmath 1473/udp -telefinder 1474/tcp -telefinder 1474/udp -taligent-lm 1475/tcp #Taligent License Manager -taligent-lm 1475/udp #Taligent License Manager -clvm-cfg 1476/tcp -clvm-cfg 1476/udp -ms-sna-server 1477/tcp -ms-sna-server 1477/udp -ms-sna-base 1478/tcp -ms-sna-base 1478/udp -dberegister 1479/tcp -dberegister 1479/udp -pacerforum 1480/tcp -pacerforum 1480/udp -airs 1481/tcp -airs 1481/udp -miteksys-lm 1482/tcp #Miteksys License Manager -miteksys-lm 1482/udp #Miteksys License Manager -afs 1483/tcp #AFS License Manager -afs 1483/udp #AFS License Manager -confluent 1484/tcp #Confluent License Manager -confluent 1484/udp #Confluent License Manager -lansource 1485/tcp -lansource 1485/udp -nms_topo_serv 1486/tcp -nms_topo_serv 1486/udp -localinfosrvr 1487/tcp -localinfosrvr 1487/udp -docstor 1488/tcp -docstor 1488/udp -dmdocbroker 1489/tcp -dmdocbroker 1489/udp -insitu-conf 1490/tcp -insitu-conf 1490/udp -anynetgateway 1491/tcp -anynetgateway 1491/udp -stone-design-1 1492/tcp -stone-design-1 1492/udp -netmap_lm 1493/tcp -netmap_lm 1493/udp -ica 1494/tcp -ica 1494/udp -cvc 1495/tcp -cvc 1495/udp -liberty-lm 1496/tcp -liberty-lm 1496/udp -rfx-lm 1497/tcp -rfx-lm 1497/udp -watcom-sql 1498/tcp -watcom-sql 1498/udp -fhc 1499/tcp #Federico Heinz Consultora -fhc 1499/udp #Federico Heinz Consultora -vlsi-lm 1500/tcp #VLSI License Manager -vlsi-lm 1500/udp #VLSI License Manager -sas-3 1501/tcp #Satellite-data Acquisition System 3 -sas-3 1501/udp #Satellite-data Acquisition System 3 -shivadiscovery 1502/tcp #Shiva -shivadiscovery 1502/udp #Shiva -imtc-mcs 1503/tcp #Databeam -imtc-mcs 1503/udp #Databeam -evb-elm 1504/tcp #EVB Software Engineering License Manager -evb-elm 1504/udp #EVB Software Engineering License Manager -funkproxy 1505/tcp #Funk Software, Inc. -funkproxy 1505/udp #Funk Software, Inc. -utcd 1506/tcp #Universal Time daemon (utcd) -utcd 1506/udp #Universal Time daemon (utcd) -symplex 1507/tcp -symplex 1507/udp -diagmond 1508/tcp -diagmond 1508/udp -robcad-lm 1509/tcp #Robcad, Ltd. License Manager -robcad-lm 1509/udp #Robcad, Ltd. License Manager -mvx-lm 1510/tcp #Midland Valley Exploration Ltd. Lic. Man. -mvx-lm 1510/udp #Midland Valley Exploration Ltd. Lic. Man. -3l-l1 1511/tcp -3l-l1 1511/udp -wins 1512/tcp #Microsoft's Windows Internet Name Service -wins 1512/udp #Microsoft's Windows Internet Name Service -fujitsu-dtc 1513/tcp #Fujitsu Systems Business of America, Inc -fujitsu-dtc 1513/udp #Fujitsu Systems Business of America, Inc -fujitsu-dtcns 1514/tcp #Fujitsu Systems Business of America, Inc -fujitsu-dtcns 1514/udp #Fujitsu Systems Business of America, Inc -ifor-protocol 1515/tcp -ifor-protocol 1515/udp -vpad 1516/tcp #Virtual Places Audio data -vpad 1516/udp #Virtual Places Audio data -vpac 1517/tcp #Virtual Places Audio control -vpac 1517/udp #Virtual Places Audio control -vpvd 1518/tcp #Virtual Places Video data -vpvd 1518/udp #Virtual Places Video data -vpvc 1519/tcp #Virtual Places Video control -vpvc 1519/udp #Virtual Places Video control -atm-zip-office 1520/tcp #atm zip office -atm-zip-office 1520/udp #atm zip office -ncube-lm 1521/tcp #nCube License Manager -ncube-lm 1521/udp #nCube License Manager -rna-lm 1522/tcp #Ricardo North America License Manager -rna-lm 1522/udp #Ricardo North America License Manager -cichild-lm 1523/tcp -cichild-lm 1523/udp -ingreslock 1524/tcp #ingres -ingreslock 1524/udp #ingres -prospero-np 1525/tcp #Prospero Directory Service non-priv -prospero-np 1525/udp #Prospero Directory Service non-priv -#PROBLEMS!======================================================== -orasrv 1525/tcp #oracle -orasrv 1525/udp #oracle -#PROBLEMS!======================================================== -pdap-np 1526/tcp #Prospero Data Access Prot non-priv -pdap-np 1526/udp #Prospero Data Access Prot non-priv -tlisrv 1527/tcp #oracle -tlisrv 1527/udp #oracle -mciautoreg 1528/tcp -mciautoreg 1528/udp -support 1529/tcp prmsd gnatsd # cygnus bug tracker -coauthor 1529/tcp #oracle -coauthor 1529/udp #oracle -rap-service 1530/tcp -rap-service 1530/udp -rap-listen 1531/tcp -rap-listen 1531/udp -miroconnect 1532/tcp -miroconnect 1532/udp -virtual-places 1533/tcp #Virtual Places Software -virtual-places 1533/udp #Virtual Places Software -micromuse-lm 1534/tcp -micromuse-lm 1534/udp -ampr-info 1535/tcp -ampr-info 1535/udp -ampr-inter 1536/tcp -ampr-inter 1536/udp -sdsc-lm 1537/tcp -sdsc-lm 1537/udp -3ds-lm 1538/tcp -3ds-lm 1538/udp -intellistor-lm 1539/tcp #Intellistor License Manager -intellistor-lm 1539/udp #Intellistor License Manager -rds 1540/tcp -rds 1540/udp -rds2 1541/tcp -rds2 1541/udp -gridgen-elmd 1542/tcp -gridgen-elmd 1542/udp -simba-cs 1543/tcp -simba-cs 1543/udp -aspeclmd 1544/tcp -aspeclmd 1544/udp -vistium-share 1545/tcp -vistium-share 1545/udp -abbaccuray 1546/tcp -abbaccuray 1546/udp -laplink 1547/tcp -laplink 1547/udp -axon-lm 1548/tcp #Axon License Manager -axon-lm 1548/udp #Axon License Manager -shivahose 1549/tcp #Shiva Hose -shivasound 1549/udp #Shiva Sound -3m-image-lm 1550/tcp #Image Storage license manager 3M Company -3m-image-lm 1550/udp #Image Storage license manager 3M Company -hecmtl-db 1551/tcp -hecmtl-db 1551/udp -pciarray 1552/tcp -pciarray 1552/udp -issd 1600/tcp -issd 1600/udp -# IMPORTANT NOTE: Ports 1645/1646 are the traditional radius ports used by -# many vendors without obtaining official IANA assignment. The official -# assignment is now ports 1812/1813 and users are encouraged to migrate -# when possible to these new ports. -#radius 1645/udp #RADIUS authentication protocol (old) -#radacct 1646/udp #RADIUS accounting protocol (old) -nkd 1650/tcp -nkd 1650/udp -shiva_confsrvr 1651/tcp -shiva_confsrvr 1651/udp -xnmp 1652/tcp -xnmp 1652/udp -netview-aix-1 1661/tcp -netview-aix-1 1661/udp -netview-aix-2 1662/tcp -netview-aix-2 1662/udp -netview-aix-3 1663/tcp -netview-aix-3 1663/udp -netview-aix-4 1664/tcp -netview-aix-4 1664/udp -netview-aix-5 1665/tcp -netview-aix-5 1665/udp -netview-aix-6 1666/tcp -netview-aix-6 1666/udp -netview-aix-7 1667/tcp -netview-aix-7 1667/udp -netview-aix-8 1668/tcp -netview-aix-8 1668/udp -netview-aix-9 1669/tcp -netview-aix-9 1669/udp -netview-aix-10 1670/tcp -netview-aix-10 1670/udp -netview-aix-11 1671/tcp -netview-aix-11 1671/udp -netview-aix-12 1672/tcp -netview-aix-12 1672/udp -l2f 1701/tcp #l2f -l2f 1701/udp #l2f -l2tp 1701/tcp #Layer 2 Tunnelling Protocol -l2tp 1701/udp #Layer 2 Tunnelling Protocol -pptp 1723/tcp #Point-to-point tunnelling protocol -# IMPORTANT NOTE: See comments for ports 1645/1646 when using older equipment -radius 1812/udp #RADIUS authentication protocol (IANA sanctioned) -radacct 1813/udp #RADIUS accounting protocol (IANA sanctioned) -licensedaemon 1986/tcp #cisco license management -licensedaemon 1986/udp #cisco license management -tr-rsrb-p1 1987/tcp #cisco RSRB Priority 1 port -tr-rsrb-p1 1987/udp #cisco RSRB Priority 1 port -tr-rsrb-p2 1988/tcp #cisco RSRB Priority 2 port -tr-rsrb-p2 1988/udp #cisco RSRB Priority 2 port -tr-rsrb-p3 1989/tcp #cisco RSRB Priority 3 port -tr-rsrb-p3 1989/udp #cisco RSRB Priority 3 port -#PROBLEMS!=================================================== -mshnet 1989/tcp #MHSnet system -mshnet 1989/udp #MHSnet system -#PROBLEMS!=================================================== -stun-p1 1990/tcp #cisco STUN Priority 1 port -stun-p1 1990/udp #cisco STUN Priority 1 port -stun-p2 1991/tcp #cisco STUN Priority 2 port -stun-p2 1991/udp #cisco STUN Priority 2 port -stun-p3 1992/tcp #cisco STUN Priority 3 port -stun-p3 1992/udp #cisco STUN Priority 3 port -#PROBLEMS!=================================================== -ipsendmsg 1992/tcp -ipsendmsg 1992/udp -#PROBLEMS!=================================================== -snmp-tcp-port 1993/tcp #cisco SNMP TCP port -snmp-tcp-port 1993/udp #cisco SNMP TCP port -stun-port 1994/tcp #cisco serial tunnel port -stun-port 1994/udp #cisco serial tunnel port -perf-port 1995/tcp #cisco perf port -perf-port 1995/udp #cisco perf port -tr-rsrb-port 1996/tcp #cisco Remote SRB port -tr-rsrb-port 1996/udp #cisco Remote SRB port -gdp-port 1997/tcp #cisco Gateway Discovery Protocol -gdp-port 1997/udp #cisco Gateway Discovery Protocol -x25-svc-port 1998/tcp #cisco X.25 service (XOT) -x25-svc-port 1998/udp #cisco X.25 service (XOT) -tcp-id-port 1999/tcp #cisco identification port -tcp-id-port 1999/udp #cisco identification port -callbook 2000/tcp -callbook 2000/udp -dc 2001/tcp -wizard 2001/udp #curry -globe 2002/tcp -globe 2002/udp -cfingerd 2003/tcp #GNU finger -mailbox 2004/tcp -emce 2004/udp #CCWS mm conf -berknet 2005/tcp -oracle 2005/udp -invokator 2006/tcp -raid-cc 2006/udp #raid -dectalk 2007/tcp -raid-am 2007/udp -conf 2008/tcp -terminaldb 2008/udp -news 2009/tcp -whosockami 2009/udp -search 2010/tcp -pipe_server 2010/udp -raid-cc 2011/tcp #raid -servserv 2011/udp -ttyinfo 2012/tcp -raid-ac 2012/udp -raid-am 2013/tcp -raid-cd 2013/udp -troff 2014/tcp -raid-sf 2014/udp -cypress 2015/tcp -raid-cs 2015/udp -bootserver 2016/tcp -bootserver 2016/udp -cypress-stat 2017/tcp -bootclient 2017/udp -terminaldb 2018/tcp -rellpack 2018/udp -whosockami 2019/tcp -about 2019/udp -xinupageserver 2020/tcp -xinupageserver 2020/udp -servexec 2021/tcp -xinuexpansion1 2021/udp -down 2022/tcp -xinuexpansion2 2022/udp -xinuexpansion3 2023/tcp -xinuexpansion3 2023/udp -xinuexpansion4 2024/tcp -xinuexpansion4 2024/udp -ellpack 2025/tcp -xribs 2025/udp -scrabble 2026/tcp -scrabble 2026/udp -shadowserver 2027/tcp -shadowserver 2027/udp -submitserver 2028/tcp -submitserver 2028/udp -device2 2030/tcp -device2 2030/udp -blackboard 2032/tcp -blackboard 2032/udp -glogger 2033/tcp -glogger 2033/udp -scoremgr 2034/tcp -scoremgr 2034/udp -imsldoc 2035/tcp -imsldoc 2035/udp -objectmanager 2038/tcp -objectmanager 2038/udp -lam 2040/tcp -lam 2040/udp -interbase 2041/tcp -interbase 2041/udp -isis 2042/tcp -isis 2042/udp -isis-bcast 2043/tcp -isis-bcast 2043/udp -rimsl 2044/tcp -rimsl 2044/udp -cdfunc 2045/tcp -cdfunc 2045/udp -sdfunc 2046/tcp -sdfunc 2046/udp -#dls 2047/tcp -#dls 2047/udp -dls-monitor 2048/tcp -dls-monitor 2048/udp -nfsd 2049/tcp nfs # NFS server daemon -nfsd 2049/udp nfs # NFS server daemon -#PROBLEMS!============================================================= -#shilp 2049/tcp -#shilp 2049/udp -#PROBLEMS!============================================================= -dlsrpn 2065/tcp #Data Link Switch Read Port Number -dlsrpn 2065/udp #Data Link Switch Read Port Number -dlswpn 2067/tcp #Data Link Switch Write Port Number -dlswpn 2067/udp #Data Link Switch Write Port Number -zephyr-clt 2103/udp #Zephyr serv-hm connection -zephyr-hm 2104/udp #Zephyr hostmanager -#PROBLEMS!============================================================= -#zephyr-hm-srv 2105/udp #Zephyr hm-serv connection -#PROBLEMS!============================================================= -eklogin 2105/tcp #Kerberos (v4) encrypted rlogin -eklogin 2105/udp #Kerberos (v4) encrypted rlogin -ekshell 2106/tcp #Kerberos (v4) encrypted rshell -ekshell 2106/udp #Kerberos (v4) encrypted rshell -rkinit 2108/tcp #Kerberos (v4) remote initialization -rkinit 2108/udp #Kerberos (v4) remote initialization -ats 2201/tcp #Advanced Training System Program -ats 2201/udp #Advanced Training System Program -ivs-video 2232/tcp #IVS Video default -ivs-video 2232/udp #IVS Video default -ivsd 2241/tcp #IVS Daemon -ivsd 2241/udp #IVS Daemon -pehelp 2307/tcp -pehelp 2307/udp -cvspserver 2401/tcp #CVS network server -cvspserver 2401/udp #CVS network server -venus 2430/tcp #venus -venus 2430/udp #venus -venus-se 2431/tcp #venus-se -venus-se 2431/udp #venus-se -codasrv 2432/tcp #codasrv -codasrv 2432/udp #codasrv -codasrv-se 2433/tcp #codasrv-se -codasrv-se 2433/udp #codasrv-se -rtsserv 2500/tcp #Resource Tracking system server -rtsserv 2500/udp #Resource Tracking system server -rtsclient 2501/tcp #Resource Tracking system client -rtsclient 2501/udp #Resource Tracking system client -hp-3000-telnet 2564/tcp #HP 3000 NS/VT block mode telnet -zebrasrv 2600/tcp #zebra service -zebra 2601/tcp #zebra vty -ripd 2602/tcp #RIPd vty -ripngd 2603/tcp #RIPngd vty -ospfd 2604/tcp #OSPFd vty -bgpd 2605/tcp #BGPd vty -ospf6d 2606/tcp #OSPF6d vty -dict 2628/tcp #RFC 2229 -dict 2628/udp #RFC 2229 -listen 2766/tcp #System V listener port -www-dev 2784/tcp #world wide web - development -www-dev 2784/udp #world wide web - development -eppc 3031/tcp #Remote AppleEvents/PPC Toolbox -eppc 3031/udp #Remote AppleEvents/PPC Toolbox -NSWS 3049/tcp -NSWS 3049/udp -gds_db 3050/tcp #InterBase Database Remote Protocol -gds_db 3050/udp #InterBase Database Remote Protocol -sj3 3086/tcp #SJ3 (kanji input) -vmodem 3141/tcp -vmodem 3141/udp -ccmail 3264/tcp #cc:mail/lotus -ccmail 3264/udp #cc:mail/lotus -dec-notes 3333/tcp #DEC Notes -dec-notes 3333/udp #DEC Notes -rdp 3389/tcp #Microsoft Remote Desktop Protocol -bmap 3421/tcp #Bull Apprise portmapper -bmap 3421/udp #Bull Apprise portmapper -prsvp 3455/tcp #RSVP Port -prsvp 3455/udp rsvp-encap #RSVP Port -vat 3456/tcp #VAT default data -vat 3456/udp #VAT default data -vat-control 3457/tcp #VAT default control -vat-control 3457/udp #VAT default control -nut 3493/tcp #Network UPS Tools -nut 3493/udp #Network UPS Tools -tsp 3653/tcp #Tunnel Setup Protocol -tsp 3653/udp #Tunnel Setup Protocol -svn 3690/tcp #Subversion -svn 3690/udp #Subversion -udt_os 3900/tcp #Unidata UDT OS -udt_os 3900/udp #Unidata UDT OS -mapper-nodemgr 3984/tcp #MAPPER network node manager -mapper-nodemgr 3984/udp #MAPPER network node manager -mapper-mapethd 3985/tcp #MAPPER TCP/IP server -mapper-mapethd 3985/udp #MAPPER TCP/IP server -mapper-ws_ethd 3986/tcp #MAPPER workstation server -mapper-ws_ethd 3986/udp #MAPPER workstation server -netcheque 4008/tcp #NetCheque accounting -netcheque 4008/udp #NetCheque accounting -lockd 4045/udp # NFS lock daemon/manager -lockd 4045/tcp -nuts_dem 4132/tcp #NUTS Daemon -nuts_dem 4132/udp #NUTS Daemon -nuts_bootp 4133/tcp #NUTS Bootp Server -nuts_bootp 4133/udp #NUTS Bootp Server -rwhois 4321/tcp #Remote Who Is -rwhois 4321/udp #Remote Who Is -unicall 4343/tcp -unicall 4343/udp -krb524 4444/tcp -krb524 4444/udp -# PROBLEM krb524 assigned the port, -# PROBLEM nv used it without an assignment -nv-video 4444/tcp #NV Video default -nv-video 4444/udp #NV Video default -sae-urn 4500/tcp -sae-urn 4500/udp -fax 4557/tcp #FAX transmission service -hylafax 4559/tcp #HylaFAX client-server protocol -rfa 4672/tcp #remote file access server -rfa 4672/udp #remote file access server -commplex-main 5000/tcp -commplex-main 5000/udp -commplex-link 5001/tcp -commplex-link 5001/udp -rfe 5002/tcp #radio free ethernet -rfe 5002/udp #radio free ethernet -telelpathstart 5010/tcp -telelpathstart 5010/udp -telelpathattack 5011/tcp -telelpathattack 5011/udp -mmcc 5050/tcp #multimedia conference control tool -mmcc 5050/udp #multimedia conference control tool -rmonitor_secure 5145/tcp -rmonitor_secure 5145/udp -aol 5190/tcp #America-Online -aol 5190/udp #America-Online -aol-1 5191/tcp #AmericaOnline1 -aol-1 5191/udp #AmericaOnline1 -aol-2 5192/tcp #AmericaOnline2 -aol-2 5192/udp #AmericaOnline2 -aol-3 5193/tcp #AmericaOnline3 -aol-3 5193/udp #AmericaOnline3 -jabber-client 5222/tcp #Jabber Client Connection -jabber-client 5222/udp #Jabber Client Connection -padl2sim 5236/tcp -padl2sim 5236/udp -jabber-server 5269/tcp #Jabber Server Connection -jabber-server 5269/udp #Jabber Server Connection -hacl-hb 5300/tcp # HA cluster heartbeat -hacl-hb 5300/udp # HA cluster heartbeat -hacl-gs 5301/tcp # HA cluster general services -hacl-gs 5301/udp # HA cluster general services -hacl-cfg 5302/tcp # HA cluster configuration -hacl-cfg 5302/udp # HA cluster configuration -hacl-probe 5303/tcp # HA cluster probing -hacl-probe 5303/udp # HA cluster probing -hacl-local 5304/tcp -hacl-local 5304/udp -hacl-test 5305/tcp -hacl-test 5305/udp -cfengine 5308/tcp -cfengine 5308/udp -mdns 5353/tcp #Multicast DNS -mdns 5353/udp #Multicast DNS -postgresql 5432/tcp #PostgreSQL Database -postgresql 5432/udp #PostgreSQL Database -rplay 5555/udp -canna 5680/tcp #Canna (Japanese Input) -proshareaudio 5713/tcp #proshare conf audio -proshareaudio 5713/udp #proshare conf audio -prosharevideo 5714/tcp #proshare conf video -prosharevideo 5714/udp #proshare conf video -prosharedata 5715/tcp #proshare conf data -prosharedata 5715/udp #proshare conf data -prosharerequest 5716/tcp #proshare conf request -prosharerequest 5716/udp #proshare conf request -prosharenotify 5717/tcp #proshare conf notify -prosharenotify 5717/udp #proshare conf notify -cvsup 5999/tcp #CVSup file transfer/John Polstra/FreeBSD -x11 6000/tcp #6000-6063 are assigned to X Window System -x11 6000/udp -x11-ssh 6010/tcp #Unofficial name, for convenience -x11-ssh 6010/udp -softcm 6110/tcp #HP SoftBench CM -softcm 6110/udp #HP SoftBench CM -spc 6111/tcp #HP SoftBench Sub-Process Control -spc 6111/udp #HP SoftBench Sub-Process Control -meta-corp 6141/tcp #Meta Corporation License Manager -meta-corp 6141/udp #Meta Corporation License Manager -aspentec-lm 6142/tcp #Aspen Technology License Manager -aspentec-lm 6142/udp #Aspen Technology License Manager -watershed-lm 6143/tcp #Watershed License Manager -watershed-lm 6143/udp #Watershed License Manager -statsci1-lm 6144/tcp #StatSci License Manager - 1 -statsci1-lm 6144/udp #StatSci License Manager - 1 -statsci2-lm 6145/tcp #StatSci License Manager - 2 -statsci2-lm 6145/udp #StatSci License Manager - 2 -lonewolf-lm 6146/tcp #Lone Wolf Systems License Manager -lonewolf-lm 6146/udp #Lone Wolf Systems License Manager -montage-lm 6147/tcp #Montage License Manager -montage-lm 6147/udp #Montage License Manager -ricardo-lm 6148/tcp #Ricardo North America License Manager -ricardo-lm 6148/udp #Ricardo North America License Manager -xdsxdm 6558/tcp -xdsxdm 6558/udp -ircd 6667/tcp #Internet Relay Chat (unoffical) -acmsoda 6969/tcp -acmsoda 6969/udp -afs3-fileserver 7000/tcp #file server itself -afs3-fileserver 7000/udp #file server itself -afs3-callback 7001/tcp #callbacks to cache managers -afs3-callback 7001/udp #callbacks to cache managers -afs3-prserver 7002/tcp #users & groups database -afs3-prserver 7002/udp #users & groups database -afs3-vlserver 7003/tcp #volume location database -afs3-vlserver 7003/udp #volume location database -afs3-kaserver 7004/tcp #AFS/Kerberos authentication service -afs3-kaserver 7004/udp #AFS/Kerberos authentication service -afs3-volser 7005/tcp #volume management server -afs3-volser 7005/udp #volume management server -afs3-errors 7006/tcp #error interpretation service -afs3-errors 7006/udp #error interpretation service -afs3-bos 7007/tcp #basic overseer process -afs3-bos 7007/udp #basic overseer process -afs3-update 7008/tcp #server-to-server updater -afs3-update 7008/udp #server-to-server updater -afs3-rmtsys 7009/tcp #remote cache manager service -afs3-rmtsys 7009/udp #remote cache manager service -afs3-resserver 7010/tcp #MR-AFS residence server -afs3-resserver 7010/udp #MR-AFS residence server -ups-onlinet 7010/tcp #onlinet uninterruptable power supplies -ups-onlinet 7010/udp #onlinet uninterruptable power supplies -afs3-remio 7011/tcp #MR-AFS remote IO server -afs3-remio 7011/udp #MR-AFS remote IO server -font-service 7100/tcp #X Font Service -font-service 7100/udp #X Font Service -fodms 7200/tcp #FODMS FLIP -fodms 7200/udp #FODMS FLIP -dlip 7201/tcp -dlip 7201/udp -ftp-proxy 8021/tcp # FTP proxy -natd 8668/divert # Network Address Translation -jetdirect 9100/tcp #HP JetDirect card -git 9418/tcp # Git Version Control System -man 9535/tcp -man 9535/udp -sd 9876/tcp #Session Director -sd 9876/udp #Session Director -amanda 10080/udp #Dump server control -amandaidx 10082/tcp #Amanda indexing -amidxtape 10083/tcp #Amanda tape indexing -isode-dua 17007/tcp -isode-dua 17007/udp -biimenu 18000/tcp #Beckman Instruments, Inc. -biimenu 18000/udp #Beckman Instruments, Inc. -wnn4 22273/tcp wnn6 #Wnn4 (Japanese input) -wnn4_Cn 22289/tcp wnn6_Cn #Wnn4 (Chinese input) -wnn4_Kr 22305/tcp wnn6_Kr #Wnn4 (Korean input) -wnn4_Tw 22321/tcp wnn6_Tw #Wnn4 (Taiwanse input) -wnn6_DS 26208/tcp #Wnn6 (Dserver) -dbbrowse 47557/tcp #Databeam Corporation -dbbrowse 47557/udp #Databeam Corporation diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/shadow b/target/device/Atmel/atstk100x/target_skeleton/etc/shadow deleted file mode 100644 index d5dc3974d..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/shadow +++ /dev/null @@ -1,18 +0,0 @@ -root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7::: -daemon:!:13200:0:99999:7::: -bin:!:13200:0:99999:7::: -sys:!:13200:0:99999:7::: -sync:!:13200:0:99999:7::: -mail:!:13200:0:99999:7::: -proxy:!:13200:0:99999:7::: -www-data:!:13200:0:99999:7::: -backup:!:13200:0:99999:7::: -operator:!:13200:0:99999:7::: -haldaemon:!:13200:0:99999:7::: -dbus:!:13200:0:99999:7::: -ftp:!:13200:0:99999:7::: -dnsmasq:!:13200:0:99999:7::: -sshd:!:13200:0:99999:7::: -nobody:!:13200:0:99999:7::: -avr32:$1$TVWxUVs7$/ze18sFeD6F26w0hgyB6M.:13200:0:99999:7::: -default:!:13200:0:99999:7::: diff --git a/target/device/Atmel/atstk100x/target_skeleton/etc/shells b/target/device/Atmel/atstk100x/target_skeleton/etc/shells deleted file mode 100644 index 6ee110ced..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/etc/shells +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/shells: valid login shells -/bin/ash -/bin/sh -/bin/zsh -/bin/bash -/usr/bin/zsh -/usr/bin/bash -/usr/bin/screen diff --git a/target/device/Atmel/atstk100x/target_skeleton/root/.bash_logout b/target/device/Atmel/atstk100x/target_skeleton/root/.bash_logout deleted file mode 100644 index 77ef1f950..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/root/.bash_logout +++ /dev/null @@ -1,7 +0,0 @@ -# ~/.bash_logout: executed by bash(1) when login shell exits. - -# when leaving the console clear the screen to increase privacy - -case "`tty`" in - /dev/tty[0-9]*) clear -esac diff --git a/target/device/Atmel/atstk100x/target_skeleton/root/.bash_profile b/target/device/Atmel/atstk100x/target_skeleton/root/.bash_profile deleted file mode 100644 index 27bf14953..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/root/.bash_profile +++ /dev/null @@ -1,15 +0,0 @@ -# .bash_profile - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -umask 022 - -if [ -f ~/.bashrc ]; then - source ~/.bashrc -fi diff --git a/target/device/Atmel/atstk100x/target_skeleton/root/.bashrc b/target/device/Atmel/atstk100x/target_skeleton/root/.bashrc deleted file mode 100644 index d13c8f902..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/root/.bashrc +++ /dev/null @@ -1,48 +0,0 @@ -# ~/.bashrc: executed by bash(1) for non-login interactive shells. - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -# If running interactively, then: -if [ "$PS1" ]; then - - if [ "$BASH" ]; then - export PS1="[\u@\h \W]\\$ " - else - if [ "`id -u`" -eq 0 ]; then - export PS1='# ' - else - export PS1='$ ' - fi - fi - - export USER=`id -un` - export LOGNAME=$USER - export HOSTNAME=`/bin/hostname` - export HISTSIZE=1000 - export HISTFILESIZE=1000 - export PAGER='/bin/more ' - export EDITOR='/bin/vi' - export INPUTRC=/etc/inputrc - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:'; - - ### Some aliases - alias ps2='ps facux ' - alias ps1='ps faxo "%U %t %p %a" ' - alias af='ps af' - alias cls='clear' - alias ll='/bin/ls --color=tty -laFh' - alias ls='/bin/ls --color=tty -F' - alias df='df -h' - alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 ' - #alias bc='bc -l' - alias minicom='minicom -c on' - alias calc='calc -Cd ' - alias bc='calc -Cd ' -fi; diff --git a/target/device/Atmel/atstk100x/target_skeleton/sys/.empty b/target/device/Atmel/atstk100x/target_skeleton/sys/.empty deleted file mode 100644 index e69de29bb..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/sys/.empty +++ /dev/null diff --git a/target/device/Atmel/atstk100x/target_skeleton/usr/share/udhcpc/default.script b/target/device/Atmel/atstk100x/target_skeleton/usr/share/udhcpc/default.script deleted file mode 100644 index 56cbaf6c4..000000000 --- a/target/device/Atmel/atstk100x/target_skeleton/usr/share/udhcpc/default.script +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh - - -case $1 in - deconfig) - ifconfig $interface 0.0.0.0 - ;; - bound|renew) - ifconfig $interface $ip netmask $subnet broadcast $broadcast - route add default gw $router - echo -n > /etc/resolv.conf - [ -z "$domain" ] || echo "domain $domain" >> /etc/resolv.conf - for n in $dns; do echo "nameserver $n" >> /etc/resolv.conf; done - if [ ! -z "$hostname" ]; then - echo $hostname > /etc/hostname - hostname $hostname - fi - ;; -esac |