This patch renames the Atmel atstk1002 target board to a more generic atstk100x name. This to make it easier to add support for other CPU-boards than atstk1002.

Submitted by Hans-Christian Egtvedt

1 files changed, 0 insertions, 129 deletions

diff --git a/target/device/Atmel/atstk1002/target_skeleton/etc/mplayer.conf b/target/device/Atmel/atstk1002/target_skeleton/etc/mplayer.conf
deleted file mode 100644
index 45d7d7ec9..000000000
--- a/target/device/Atmel/atstk1002/target_skeleton/etc/mplayer.conf
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# MPlayer configuration file
-#
-# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
-# and per user from ~/.mplayer/config, where per-user settings override
-# system-wide settings, all of which are overrriden by the command line.
-#
-# The configuration file settings are the same as the command line
-# options without the preceding '-'.
-#
-# See the CONFIGURATION FILES section in the man page
-# for a detailed description of the syntax.
-
-
-##################
-# video settings #
-##################
-
-# Specify default video driver (see -vo help for a list).
-vo=fbdev2
-
-# Direct rendring, skip double buffering for framebuffer device
-dr=yes
-
-# Use SDL video with the aalib subdriver by default.
-#vo = sdl:aalib
-
-# FBdev driver:
-#
-# mode to use (read from fb.modes)
-#fbmode = 640x480-120
-#
-# location of the fb.modes file
-#fbmodeconfig = /etc/fb.modes
-
-# Specify your monitor timings for the vesa and fbdev video output drivers.
-# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
-# that exceed the capabilities of your monitor, you may damage it.
-#
-# horizontal frequency range (k stands for 1000)
-#monitor-hfreq = 31.5k-50k,70k
-#
-# vertical frequency range
-#monitor-vfreq = 50-90
-#
-# dotclock (or pixelclock) range (m stands for 1000000)
-#monitor-dotclock = 30M-300M
-
-# Start in fullscreen mode by default.
-#fs=yes
-
-# Change to a different videomode when going fullscreen.
-#vm=yes
-
-# Override the autodetected color depth, may need 'vm=yes' as well.
-#bpp=0
-
-# Enable software scaling (powerful CPU needed) for video output
-# drivers that do not support hardware scaling.
-#zoom=yes
-
-# standard monitor size, with square pixels
-#monitoraspect=4:3
-
-# Use this for a widescreen monitor, non-square pixels.
-#monitoraspect=16:9
-
-# Keep the player window on top of all other windows.
-#ontop=yes
-
-
-##################
-# audio settings #
-##################
-
-# Specify default audio driver (see -ao help for a list).
-ao=oss,
-
-# Use SDL audio driver with the esd subdriver by default.
-#ao = sdl:esd
-
-# Specify the mixer device.
-#mixer = /dev/mixer
-
-# Resample the sound to 44100Hz with the lavcresample audio filter.
-#af=lavcresample=44100
-
-# Specify default audio codec (see -ac help for a list).
-ac=mad,
-
-
-##################
-# other settings #
-##################
-
-# Drop frames to preserve audio/video sync.
-#framedrop = yes
-
-# Specify your preferred skin here (skins are searched for in
-# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
-#skin = Abyss
-
-# Resample the font alphamap.
-# 0     plain white fonts
-# 0.75  very narrow black outline (default)
-# 1     narrow black outline
-# 10    bold black outline
-#ffactor = 0.75
-
-# cache settings
-#
-# Use 8MB input cache by default.
-#cache = 8192
-#
-# Prefill 20% of the cache before starting playback.
-#cache-min = 20.0
-#
-# Prefill 50% of the cache before restarting playback after the cache emptied.
-#cache-seek-min = 50
-
-# DVD: Display English subtitles if available.
-#slang = en
-
-# DVD: Play English audio tracks if available.
-#alang = en
-
-
-# You can also include other configuration files.
-#include = /path/to/the/file/you/want/to/include