busybox: Bump to 1.17.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

8 files changed, 16 insertions, 355 deletions

diff --git a/package/busybox/Config.in b/package/busybox/Config.in
index fc342590a..8227443ed 100644
--- a/package/busybox/Config.in
+++ b/package/busybox/Config.in
@@ -45,7 +45,7 @@ config BR2_BUSYBOX_VERSION
 	default "1.14.4"	if BR2_BUSYBOX_VERSION_1_14_X
 	default "1.15.3"	if BR2_BUSYBOX_VERSION_1_15_X
 	default "1.16.2"	if BR2_BUSYBOX_VERSION_1_16_X
-	default "1.17.1"	if BR2_BUSYBOX_VERSION_1_17_X
+	default "1.17.2"	if BR2_BUSYBOX_VERSION_1_17_X
 
 config BR2_PACKAGE_BUSYBOX_FULLINSTALL
 	bool "Run BusyBox's own full installation"
diff --git a/package/busybox/busybox-1.17.1/busybox-1.17.1-grep.patch b/package/busybox/busybox-1.17.1/busybox-1.17.1-grep.patch
deleted file mode 100644
index f8fc25d3f..000000000
--- a/package/busybox/busybox-1.17.1/busybox-1.17.1-grep.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-diff -urpN busybox-1.17.1/findutils/grep.c busybox-1.17.1-grep/findutils/grep.c
---- busybox-1.17.1/findutils/grep.c	2010-07-06 04:25:54.000000000 +0200
-+++ busybox-1.17.1-grep/findutils/grep.c	2010-08-23 02:37:08.000000000 +0200
-@@ -461,15 +461,19 @@ static int grep_file(FILE *file)
- 						if (found)
- 							print_line(gl->pattern, strlen(gl->pattern), linenum, ':');
- 					} else while (1) {
-+						unsigned start = gl->matched_range.rm_so;
- 						unsigned end = gl->matched_range.rm_eo;
-+						unsigned len = end - start;
- 						char old = line[end];
- 						line[end] = '\0';
--						print_line(line + gl->matched_range.rm_so,
--								end - gl->matched_range.rm_so,
--								linenum, ':');
-+						/* Empty match is not printed: try "echo test | grep -o ''" */
-+						if (len != 0)
-+							print_line(line + start, len, linenum, ':');
- 						if (old == '\0')
- 							break;
- 						line[end] = old;
-+						if (len == 0)
-+							end++;
- #if !ENABLE_EXTRA_COMPAT
- 						if (regexec(&gl->compiled_regex, line + end,
- 								1, &gl->matched_range, REG_NOTBOL) != 0)
-diff -urpN busybox-1.17.1/testsuite/grep.tests busybox-1.17.1-grep/testsuite/grep.tests
---- busybox-1.17.1/testsuite/grep.tests	2010-07-06 04:25:54.000000000 +0200
-+++ busybox-1.17.1-grep/testsuite/grep.tests	2010-08-23 02:37:08.000000000 +0200
-@@ -98,5 +98,9 @@ testing "grep -o does not loop forever" 
- 	'grep -o "[^/]*$"' \
- 	"test\n" \
- 	"" "/var/test\n"
-+testing "grep -o does not loop forever on zero-length match" \
-+	'grep -o "" | head -n1' \
-+	"" \
-+	"" "test\n"
- 
- exit $FAILCOUNT
diff --git a/package/busybox/busybox-1.17.1/busybox-1.17.1-make.patch b/package/busybox/busybox-1.17.1/busybox-1.17.1-make.patch
deleted file mode 100644
index 6177696d9..000000000
--- a/package/busybox/busybox-1.17.1/busybox-1.17.1-make.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-diff -urpN busybox-1.17.1/Makefile busybox-1.17.1-make/Makefile
---- busybox-1.17.1/Makefile	2010-07-25 00:13:44.000000000 +0200
-+++ busybox-1.17.1-make/Makefile	2010-08-22 09:30:33.000000000 +0200
-@@ -433,7 +433,12 @@ ifeq ($(config-targets),1)
- -include $(srctree)/arch/$(ARCH)/Makefile
- export KBUILD_DEFCONFIG
- 
--config %config: scripts_basic outputmakefile gen_build_files FORCE
-+config: scripts_basic outputmakefile gen_build_files FORCE
-+	$(Q)mkdir -p include
-+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
-+	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
-+
-+%config: scripts_basic outputmakefile gen_build_files FORCE
- 	$(Q)mkdir -p include
- 	$(Q)$(MAKE) $(build)=scripts/kconfig $@
- 	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
-@@ -1285,9 +1290,13 @@ endif
- 	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
- 
- # Modules
--/ %/: prepare scripts FORCE
-+%/: prepare scripts FORCE
- 	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
- 	$(build)=$(build-dir)
-+/: prepare scripts FORCE
-+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
-+	$(build)=$(build-dir)
-+
- %.ko: prepare scripts FORCE
- 	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
- 	$(build)=$(build-dir) $(@:.ko=.o)
diff --git a/package/busybox/busybox-1.17.1/busybox-1.17.1-mdev.patch b/package/busybox/busybox-1.17.1/busybox-1.17.1-mdev.patch
deleted file mode 100644
index 71c7abdab..000000000
--- a/package/busybox/busybox-1.17.1/busybox-1.17.1-mdev.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-diff -urpN busybox-1.17.1/testsuite/mdev.tests busybox-1.17.1-mdev/testsuite/mdev.tests
---- busybox-1.17.1/testsuite/mdev.tests	2010-07-06 04:25:54.000000000 +0200
-+++ busybox-1.17.1-mdev/testsuite/mdev.tests	2010-08-23 02:38:21.000000000 +0200
-@@ -38,6 +38,16 @@ brw-rw---- 1 0 0 8,0 sda
- SKIP=
- 
- # continuing to use directory structure from prev test
-+optional STATIC FEATURE_MDEV_CONF FEATURE_LS_TIMESTAMPS FEATURE_LS_USERNAME
-+testing "mdev deletes /block/sda" \
-+	"env - PATH=$PATH ACTION=remove DEVPATH=/block/sda chroot mdev.testdir /mdev 2>&1;
-+	ls -ln mdev.testdir/dev | $FILTER_LS" \
-+"\
-+" \
-+	"" ""
-+SKIP=
-+
-+# continuing to use directory structure from prev test
- rm -rf mdev.testdir/dev/*
- echo ".* 1:1 666" >mdev.testdir/etc/mdev.conf
- echo "sda 2:2 444" >>mdev.testdir/etc/mdev.conf
-diff -urpN busybox-1.17.1/util-linux/mdev.c busybox-1.17.1-mdev/util-linux/mdev.c
---- busybox-1.17.1/util-linux/mdev.c	2010-07-06 04:25:54.000000000 +0200
-+++ busybox-1.17.1-mdev/util-linux/mdev.c	2010-08-23 02:38:21.000000000 +0200
-@@ -132,6 +132,7 @@ static void make_device(char *path, int 
- 			major = -1;
- 		}
- 	}
-+	/* else: for delete, -1 still deletes the node, but < -1 suppresses that */
- 
- 	/* Determine device name, type, major and minor */
- 	device_name = (char*) bb_basename(path);
-@@ -279,7 +280,7 @@ static void make_device(char *path, int 
- 				if (aliaslink == '!' && s == a+1) {
- 					val = st;
- 					/* "!": suppress node creation/deletion */
--					major = -1;
-+					major = -2;
- 				}
- 				else if (aliaslink == '>' || aliaslink == '=') {
- 					val = st;
-@@ -379,7 +380,7 @@ static void make_device(char *path, int 
- 				free(command);
- 			}
- 
--			if (delete && major >= 0) {
-+			if (delete && major >= -1) {
- 				if (ENABLE_FEATURE_MDEV_RENAME && alias) {
- 					if (aliaslink == '>')
- 						unlink(device_name);
diff --git a/package/busybox/busybox-1.17.1/busybox-1.17.1-mktemp.patch b/package/busybox/busybox-1.17.1/busybox-1.17.1-mktemp.patch
deleted file mode 100644
index 557e337b1..000000000
--- a/package/busybox/busybox-1.17.1/busybox-1.17.1-mktemp.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -urpN busybox-1.17.1/debianutils/mktemp.c busybox-1.17.1-mktemp/debianutils/mktemp.c
---- busybox-1.17.1/debianutils/mktemp.c	2010-07-25 00:12:56.000000000 +0200
-+++ busybox-1.17.1-mktemp/debianutils/mktemp.c	2010-07-27 08:21:26.000000000 +0200
-@@ -50,7 +50,7 @@ int mktemp_main(int argc UNUSED_PARAM, c
- 	opts = getopt32(argv, "dqtp:", &path);
- 
- 	chp = argv[optind] ? argv[optind] : xstrdup("tmp.XXXXXX");
--	if (chp[0] != '/' || (opts & 8))
-+	if (!strchr(chp, '/') || (opts & 8))
- 		chp = concat_path_file(path, chp);
- 
- 	if (opts & 1) { /* -d */
diff --git a/package/busybox/busybox-1.17.1/busybox-1.17.1-sed.patch b/package/busybox/busybox-1.17.1/busybox-1.17.1-sed.patch
deleted file mode 100644
index f65aebe26..000000000
--- a/package/busybox/busybox-1.17.1/busybox-1.17.1-sed.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-diff -urpN busybox-1.17.1/editors/sed.c busybox-1.17.1-sed/editors/sed.c
---- busybox-1.17.1/editors/sed.c	2010-07-06 04:25:53.000000000 +0200
-+++ busybox-1.17.1-sed/editors/sed.c	2010-08-17 02:05:27.000000000 +0200
-@@ -61,6 +61,10 @@
- #include "libbb.h"
- #include "xregex.h"
- 
-+enum {
-+	OPT_in_place = 1 << 0,
-+};
-+
- /* Each sed command turns into one of these structures. */
- typedef struct sed_cmd_s {
- 	/* Ordered by alignment requirements: currently 36 bytes on x86 */
-@@ -938,8 +942,11 @@ static void process_files(void)
- 
- 		if (matched) {
- 			/* once matched, "n,xxx" range is dead, disabling it */
--			if (sed_cmd->beg_line > 0)
-+			if (sed_cmd->beg_line > 0
-+			 && !(option_mask32 & OPT_in_place) /* but not for -i */
-+			) {
- 				sed_cmd->beg_line = -2;
-+			}
- 			sed_cmd->in_match = !(
- 				/* has the ending line come, or is this a single address command? */
- 				(sed_cmd->end_line ?
-@@ -985,6 +992,8 @@ static void process_files(void)
- 		}
- 
- 		/* actual sedding */
-+		//bb_error_msg("pattern_space:'%s' next_line:'%s' cmd:%c",
-+		//pattern_space, next_line, sed_cmd->cmd);
- 		switch (sed_cmd->cmd) {
- 
- 		/* Print line number */
-@@ -1111,10 +1120,16 @@ static void process_files(void)
- 		{
- 			int len;
- 			/* If no next line, jump to end of script and exit. */
-+			/* http://www.gnu.org/software/sed/manual/sed.html:
-+			 * "Most versions of sed exit without printing anything
-+			 * when the N command is issued on the last line of
-+			 * a file. GNU sed prints pattern space before exiting
-+			 * unless of course the -n command switch has been
-+			 * specified. This choice is by design."
-+			 */
- 			if (next_line == NULL) {
--				free(next_line);
--				next_line = NULL;
--				goto discard_line;
-+				//goto discard_line;
-+				goto discard_commands; /* GNU behavior */
- 			}
- 			/* Append next_line, read new next_line. */
- 			len = strlen(pattern_space);
-@@ -1270,9 +1285,6 @@ static void add_cmd_block(char *cmdstr)
- int sed_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int sed_main(int argc UNUSED_PARAM, char **argv)
- {
--	enum {
--		OPT_in_place = 1 << 0,
--	};
- 	unsigned opt;
- 	llist_t *opt_e, *opt_f;
- 	int status = EXIT_SUCCESS;
-@@ -1292,6 +1304,7 @@ int sed_main(int argc UNUSED_PARAM, char
- 	opt_e = opt_f = NULL;
- 	opt_complementary = "e::f::" /* can occur multiple times */
- 	                    "nn"; /* count -n */
-+	/* -i must be first, to match OPT_in_place definition */
- 	opt = getopt32(argv, "irne:f:", &opt_e, &opt_f,
- 			    &G.be_quiet); /* counter for -n */
- 	//argc -= optind;
-diff -urpN busybox-1.17.1/testsuite/sed.tests busybox-1.17.1-sed/testsuite/sed.tests
---- busybox-1.17.1/testsuite/sed.tests	2010-07-06 04:25:54.000000000 +0200
-+++ busybox-1.17.1-sed/testsuite/sed.tests	2010-08-17 02:05:27.000000000 +0200
-@@ -80,10 +80,18 @@ test x"$SKIP_KNOWN_BUGS" = x"" && {
- # Query: how does this interact with no newline at EOF?
- testing "sed n (flushes pattern space, terminates early)" "sed -e 'n;p'" \
- 	"a\nb\nb\nc\n" "" "a\nb\nc\n"
--# N does _not_ flush pattern space, therefore c is still in there @ script end.
--testing "sed N (doesn't flush pattern space when terminating)" "sed -e 'N;p'" \
--	"a\nb\na\nb\nc\n" "" "a\nb\nc\n"
- }
-+# non-GNU sed: N does _not_ flush pattern space, therefore c is eaten @ script end
-+# GNU sed: N flushes pattern space, therefore c is printed too @ script end
-+testing "sed N (flushes pattern space (GNU behavior))" "sed -e 'N;p'" \
-+	"a\nb\na\nb\nc\n" "" "a\nb\nc\n"
-+
-+testing "sed N test2" "sed ':a;N;s/\n/ /;ta'" \
-+	"a b c\n" "" "a\nb\nc\n"
-+
-+testing "sed N test3" "sed 'N;s/\n/ /'" \
-+	"a b\nc\n" "" "a\nb\nc\n"
-+
- testing "sed address match newline" 'sed "/b/N;/b\\nc/i woo"' \
- 	"a\nwoo\nb\nc\nd\n" "" "a\nb\nc\nd\n"
- 
-@@ -270,11 +278,16 @@ testing "sed a cmd ended by double backs
- 	| two \\
- '
- 
--# fisrt three lines are deleted; 4th line is matched and printed by "2,3" and by "4" ranges
-+# first three lines are deleted; 4th line is matched and printed by "2,3" and by "4" ranges
- testing "sed with N skipping lines past ranges on next cmds" \
- 	"sed -n '1{N;N;d};1p;2,3p;3p;4p'" \
- 	"4\n4\n" "" "1\n2\n3\n4\n"
- 
-+testing "sed -i with address modifies all files, not only first" \
-+	"cp input input2; sed -i -e '1s/foo/bar/' input input2 && cat input input2; rm input2" \
-+	"bar\nbar\n" "foo\n" ""
-+
-+
- # testing "description" "arguments" "result" "infile" "stdin"
- 
- exit $FAILCOUNT
diff --git a/package/busybox/busybox-1.17.1/busybox-1.17.1-shell.patch b/package/busybox/busybox-1.17.1/busybox-1.17.1-shell.patch
deleted file mode 100644
index 5279b1202..000000000
--- a/package/busybox/busybox-1.17.1/busybox-1.17.1-shell.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-diff -urpN busybox-1.17.1/shell/ash.c busybox-1.17.1-shell/shell/ash.c
---- busybox-1.17.1/shell/ash.c	2010-07-25 00:12:43.000000000 +0200
-+++ busybox-1.17.1-shell/shell/ash.c	2010-07-25 13:09:32.000000000 +0200
-@@ -4515,6 +4515,7 @@ clear_traps(void)
- 			INT_ON;
- 		}
- 	}
-+	may_have_traps = 0;
- }
- 
- /* Lives far away from here, needed for forkchild */
-diff -urpN busybox-1.17.1/shell/ash_test/ash-signals/signal7.right busybox-1.17.1-shell/shell/ash_test/ash-signals/signal7.right
---- busybox-1.17.1/shell/ash_test/ash-signals/signal7.right	1970-01-01 01:00:00.000000000 +0100
-+++ busybox-1.17.1-shell/shell/ash_test/ash-signals/signal7.right	2010-07-25 13:09:32.000000000 +0200
-@@ -0,0 +1 @@
-+Bug detected: 0
-diff -urpN busybox-1.17.1/shell/ash_test/ash-signals/signal7.tests busybox-1.17.1-shell/shell/ash_test/ash-signals/signal7.tests
---- busybox-1.17.1/shell/ash_test/ash-signals/signal7.tests	1970-01-01 01:00:00.000000000 +0100
-+++ busybox-1.17.1-shell/shell/ash_test/ash-signals/signal7.tests	2010-07-25 13:09:32.000000000 +0200
-@@ -0,0 +1,18 @@
-+bug() {
-+	trap : exit
-+	# Bug was causing sh to be run in subshell,
-+	# as if this line is replaced with (sh -c ...; exit $?) &
-+	# here:
-+	sh -c 'echo REAL_CHILD=$$' &
-+	echo PARENTS_IDEA_OF_CHILD=$!
-+	wait  # make sure bkgd shell completes
-+}
-+
-+bug | {
-+while read varval; do
-+	eval $varval
-+done
-+test x"$REAL_CHILD" != x"" \
-+&& test x"$REAL_CHILD" = x"$PARENTS_IDEA_OF_CHILD"
-+echo "Bug detected: $?"
-+}
-diff -urpN busybox-1.17.1/shell/hush.c busybox-1.17.1-shell/shell/hush.c
---- busybox-1.17.1/shell/hush.c	2010-07-25 00:12:43.000000000 +0200
-+++ busybox-1.17.1-shell/shell/hush.c	2010-07-25 13:09:32.000000000 +0200
-@@ -3901,8 +3901,6 @@ static void insert_bg_job(struct pipe *p
- 
- 	if (G_interactive_fd)
- 		printf("[%d] %d %s\n", job->jobid, job->cmds[0].pid, job->cmdtext);
--	/* Last command's pid goes to $! */
--	G.last_bg_pid = job->cmds[job->num_cmds - 1].pid;
- 	G.last_jobid = job->jobid;
- }
- 
-@@ -4825,6 +4823,8 @@ static int run_list(struct pipe *pi)
- 				if (G.run_list_level == 1)
- 					insert_bg_job(pi);
- #endif
-+				/* Last command's pid goes to $! */
-+				G.last_bg_pid = pi->cmds[pi->num_cmds - 1].pid;
- 				G.last_exitcode = rcode = EXIT_SUCCESS;
- 				debug_printf_exec(": cmd&: exitcode EXIT_SUCCESS\n");
- 			} else {
-diff -urpN busybox-1.17.1/shell/hush_test/hush-trap/signal7.right busybox-1.17.1-shell/shell/hush_test/hush-trap/signal7.right
---- busybox-1.17.1/shell/hush_test/hush-trap/signal7.right	1970-01-01 01:00:00.000000000 +0100
-+++ busybox-1.17.1-shell/shell/hush_test/hush-trap/signal7.right	2010-07-25 13:09:32.000000000 +0200
-@@ -0,0 +1 @@
-+Bug detected: 0
-diff -urpN busybox-1.17.1/shell/hush_test/hush-trap/signal7.tests busybox-1.17.1-shell/shell/hush_test/hush-trap/signal7.tests
---- busybox-1.17.1/shell/hush_test/hush-trap/signal7.tests	1970-01-01 01:00:00.000000000 +0100
-+++ busybox-1.17.1-shell/shell/hush_test/hush-trap/signal7.tests	2010-07-25 13:09:32.000000000 +0200
-@@ -0,0 +1,18 @@
-+bug() {
-+	trap : exit
-+	# Bug was causing sh to be run in subshell,
-+	# as if this line is replaced with (sh -c ...; exit $?) &
-+	# here:
-+	sh -c 'echo REAL_CHILD=$$' &
-+	echo PARENTS_IDEA_OF_CHILD=$!
-+	wait  # make sure bkgd shell completes
-+}
-+
-+bug | {
-+while read varval; do
-+	eval $varval
-+done
-+test x"$REAL_CHILD" != x"" \
-+&& test x"$REAL_CHILD" = x"$PARENTS_IDEA_OF_CHILD"
-+echo "Bug detected: $?"
-+}
-diff -urpN busybox-1.17.1/shell/shell_common.c busybox-1.17.1-shell/shell/shell_common.c
---- busybox-1.17.1/shell/shell_common.c	2010-07-06 04:25:54.000000000 +0200
-+++ busybox-1.17.1-shell/shell/shell_common.c	2010-07-27 08:41:43.000000000 +0200
-@@ -428,9 +428,14 @@ shell_builtin_ulimit(char **argv)
- 						val <<= l->factor_shift;
- 					}
- //bb_error_msg("opt %c val_str:'%s' val:%lld", opt_char, val_str, (long long)val);
-+					/* from man bash: "If neither -H nor -S
-+					 * is specified, both the soft and hard
-+					 * limits are set. */
-+					if (!opts)
-+						opts = OPT_hard + OPT_soft;
- 					if (opts & OPT_hard)
- 						limit.rlim_max = val;
--					if ((opts & OPT_soft) || opts == 0)
-+					if (opts & OPT_soft)
- 						limit.rlim_cur = val;
- //bb_error_msg("setrlimit(%d, %lld, %lld)", l->cmd, (long long)limit.rlim_cur, (long long)limit.rlim_max);
- 					if (setrlimit(l->cmd, &limit) < 0) {
diff --git a/package/busybox/busybox-1.17.2/busybox-1.17.2-compat.patch b/package/busybox/busybox-1.17.2/busybox-1.17.2-compat.patch
new file mode 100644
index 000000000..3388969f6
--- /dev/null
+++ b/package/busybox/busybox-1.17.2/busybox-1.17.2-compat.patch
@@ -0,0 +1,15 @@
+diff -urpN busybox-1.17.2/networking/libiproute/iplink.c busybox-1.17.2-compat/networking/libiproute/iplink.c
+--- busybox-1.17.2/networking/libiproute/iplink.c	2010-08-23 02:44:35.000000000 +0200
++++ busybox-1.17.2-compat/networking/libiproute/iplink.c	2010-08-30 23:31:12.000000000 +0200
+@@ -15,6 +15,11 @@
+ #include "rt_names.h"
+ #include "utils.h"
+ 
++#ifndef IFLA_LINKINFO
++# define IFLA_LINKINFO 18
++# define IFLA_INFO_KIND 1
++#endif
++
+ /* taken from linux/sockios.h */
+ #define SIOCSIFNAME	0x8923		/* set interface name */
+