support: move kconfig stuff from package/config to support/kconfig

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

1 files changed, 0 insertions, 372 deletions

diff --git a/package/config/Makefile b/package/config/Makefile
deleted file mode 100644
index ece2a822f..000000000
--- a/package/config/Makefile
+++ /dev/null
@@ -1,372 +0,0 @@
-# ===========================================================================
-# Kernel configuration targets
-# These targets are used from top-level makefile
-
-PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
-	localmodconfig localyesconfig
-
-ifdef KBUILD_KCONFIG
-Kconfig := $(KBUILD_KCONFIG)
-else
-Kconfig := Kconfig
-endif
-
-xconfig: $(obj)/qconf
-	$< $(Kconfig)
-
-gconfig: $(obj)/gconf
-	$< $(Kconfig)
-
-menuconfig: $(obj)/mconf
-	$< $(Kconfig)
-
-config: $(obj)/conf
-	$< --oldaskconfig $(Kconfig)
-
-nconfig: $(obj)/nconf
-	$< $(Kconfig)
-
-oldconfig: $(obj)/conf
-	$< --$@ $(Kconfig)
-
-silentoldconfig: $(obj)/conf
-	$(Q)mkdir -p include/generated
-	$< --$@ $(Kconfig)
-
-# if no path is given, then use src directory to find file
-ifdef LSMOD
-LSMOD_F := $(LSMOD)
-ifeq ($(findstring /,$(LSMOD)),)
-  LSMOD_F := $(objtree)/$(LSMOD)
-endif
-endif
-
-localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)mkdir -p include/generated
-	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
-	$(Q)if [ -f .config ]; then 					\
-			cmp -s .tmp.config .config ||			\
-			(mv -f .config .config.old.1;			\
-			 mv -f .tmp.config .config;			\
-			 $(obj)/conf --silentoldconfig $(Kconfig);	\
-			 mv -f .config.old.1 .config.old)		\
-	else								\
-			mv -f .tmp.config .config;			\
-			$(obj)/conf --silentoldconfig $(Kconfig);	\
-	fi
-	$(Q)rm -f .tmp.config
-
-localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)mkdir -p include/generated
-	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
-	$(Q)sed -i s/=m/=y/ .tmp.config
-	$(Q)if [ -f .config ]; then					\
-			cmp -s .tmp.config .config ||			\
-			(mv -f .config .config.old.1;			\
-			 mv -f .tmp.config .config;			\
-			 $(obj)/conf --silentoldconfig $(Kconfig);	\
-			 mv -f .config.old.1 .config.old)		\
-	else								\
-			mv -f .tmp.config .config;			\
-			$(obj)/conf --silentoldconfig $(Kconfig);	\
-	fi
-	$(Q)rm -f .tmp.config
-
-# Create new linux.pot file
-# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
-# The symlink is used to repair a deficiency in arch/um
-update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
-	$(Q)echo "  GEN config"
-	$(Q)xgettext --default-domain=linux              \
-	    --add-comments --keyword=_ --keyword=N_      \
-	    --from-code=UTF-8                            \
-	    --files-from=scripts/kconfig/POTFILES.in     \
-	    --output $(obj)/config.pot
-	$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
-	$(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
-	$(Q)(for i in `ls arch/*/Kconfig`;               \
-	    do                                           \
-		echo "  GEN $$i";                        \
-		$(obj)/kxgettext $$i                     \
-		     >> $(obj)/config.pot;               \
-	    done )
-	$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
-	    --output $(obj)/linux.pot
-	$(Q)rm -f arch/um/Kconfig.arch
-	$(Q)rm -f $(obj)/config.pot
-
-PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
-
-allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
-	$< --$@ $(Kconfig)
-
-PHONY += listnewconfig oldnoconfig savedefconfig defconfig
-
-listnewconfig oldnoconfig: $(obj)/conf
-	$< --$@ $(Kconfig)
-
-savedefconfig: $(obj)/conf
-	$< --$@=defconfig $(Kconfig)
-
-defconfig: $(obj)/conf
-ifeq ($(KBUILD_DEFCONFIG),)
-	$< --defconfig $(Kconfig)
-else
-	@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
-	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
-endif
-
-%_defconfig: $(obj)/conf
-	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
-
-# Help text used by make help
-help:
-	@echo  '  config	  - Update current config utilising a line-oriented program'
-	@echo  '  nconfig         - Update current config utilising a ncurses menu based program'
-	@echo  '  menuconfig	  - Update current config utilising a menu based program'
-	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
-	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
-	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
-	@echo  '  localmodconfig  - Update current config disabling modules not loaded'
-	@echo  '  localyesconfig  - Update current config converting local mods to core'
-	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
-	@echo  '  defconfig	  - New config with default from ARCH supplied defconfig'
-	@echo  '  savedefconfig   - Save current config as ./defconfig (minimal config)'
-	@echo  '  allnoconfig	  - New config where all options are answered with no'
-	@echo  '  allyesconfig	  - New config where all options are accepted with yes'
-	@echo  '  allmodconfig	  - New config selecting modules when possible'
-	@echo  '  alldefconfig    - New config with all symbols set to default'
-	@echo  '  randconfig	  - New config with random answer to all options'
-	@echo  '  listnewconfig   - List new options'
-	@echo  '  oldnoconfig     - Same as silentoldconfig but set new symbols to n (unset)'
-
-# lxdialog stuff
-check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
-
-# Use recursively expanded variables so we do not call gcc unless
-# we really need to do so. (Do not call gcc as part of make mrproper)
-HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-                    -DLOCALE
-
-# ===========================================================================
-# Shared Makefile for the various kconfig executables:
-# conf:	  Used for defconfig, oldconfig and related targets
-# nconf:  Used for the nconfig target.
-#         Utilizes ncurses
-# mconf:  Used for the menuconfig target
-#         Utilizes the lxdialog package
-# qconf:  Used for the xconfig target
-#         Based on QT which needs to be installed to compile it
-# gconf:  Used for the gconfig target
-#         Based on GTK which needs to be installed to compile it
-# object files used by all kconfig flavours
-
-lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
-lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
-
-conf-objs	:= conf.o  zconf.tab.o
-mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
-nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
-kxgettext-objs	:= kxgettext.o zconf.tab.o
-
-hostprogs-y := conf qconf gconf kxgettext
-
-ifeq ($(MAKECMDGOALS),nconfig)
-	hostprogs-y += nconf
-endif
-ifeq ($(findstring nconf,$(MAKECMDGOALS)),nconf)
-       hostprogs-y += nconf
-endif
-
-ifeq ($(MAKECMDGOALS),menuconfig)
-	hostprogs-y += mconf
-endif
-ifeq ($(findstring mconf,$(MAKECMDGOALS)),mconf)
-       hostprogs-y += mconf
-endif
-
-ifeq ($(MAKECMDGOALS),xconfig)
-	qconf-target := 1
-endif
-ifeq ($(findstring qconf,$(MAKECMDGOALS)),qconf)
-	qconf-target := 1
-endif
-
-ifeq ($(MAKECMDGOALS),gconfig)
-	gconf-target := 1
-endif
-ifeq ($(findstring gconf,$(MAKECMDGOALS)),gconf)
-	gconf-target := 1
-endif
-
-ifeq ($(qconf-target),1)
-qconf-cxxobjs	:= qconf.o
-qconf-objs	:= kconfig_load.o zconf.tab.o
-endif
-
-ifeq ($(gconf-target),1)
-gconf-objs	:= gconf.o kconfig_load.o zconf.tab.o
-endif
-
-clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
-               .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
-clean-files += config.pot linux.pot
-clean-files += conf $(conf-objs)
-clean-files += mconf $(mconf-objs)
-clean-files += nconf $(nconf-objs)
-clean-files += qconf qconf.o
-clean-files += gconf gconf.o
-clean-files += kconfig_load.o zconf.tab.o
-clean-files += $(kxgettext-objs)
-
-# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
-PHONY += $(obj)/dochecklxdialog
-$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
-$(obj)/dochecklxdialog:
-	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
-
-always := dochecklxdialog
-
-# Add environment specific flags
-HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
-
-# generated files seem to need this to find local include files
-HOSTCFLAGS_lex.zconf.o	:= -I$(src)
-HOSTCFLAGS_zconf.tab.o	:= -I$(src)
-
-HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
-HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
-
-HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl
-HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-                          -D LKC_DIRECT_LINK
-
-HOSTLOADLIBES_mconf   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
-
-HOSTLOADLIBES_nconf	= -lmenu -lpanel -lncurses
-$(obj)/qconf.o: $(obj)/.tmp_qtcheck
-
-ifeq ($(qconf-target),1)
-$(obj)/.tmp_qtcheck: $(src)/Makefile
--include $(obj)/.tmp_qtcheck
-
-# QT needs some extra effort...
-$(obj)/.tmp_qtcheck:
-	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
-	if ! pkg-config --exists QtCore 2> /dev/null; then \
-	    echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
-	    pkg-config --exists qt 2> /dev/null && pkg=qt; \
-	    pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
-	    if [ -n "$$pkg" ]; then \
-	      cflags="\$$(shell pkg-config $$pkg --cflags)"; \
-	      libs="\$$(shell pkg-config $$pkg --libs)"; \
-	      moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
-	      dir="$$(pkg-config $$pkg --variable=prefix)"; \
-	    else \
-	      for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
-	        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
-	      done; \
-	      if [ -z "$$dir" ]; then \
-	        echo "*"; \
-	        echo "* Unable to find any QT installation. Please make sure that"; \
-	        echo "* the QT4 or QT3 development package is correctly installed and"; \
-	        echo "* either qmake can be found or install pkg-config or set"; \
-	        echo "* the QTDIR environment variable to the correct location."; \
-	        echo "*"; \
-	        false; \
-	      fi; \
-	      libpath=$$dir/lib; lib=qt; osdir=""; \
-	      $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
-	        osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
-	      test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
-	      test -f $$libpath/libqt-mt.so && lib=qt-mt; \
-	      cflags="-I$$dir/include"; \
-	      libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
-	      moc="$$dir/bin/moc"; \
-	    fi; \
-	    if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
-	      echo "*"; \
-	      echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
-	      echo "*"; \
-	      moc="/usr/bin/moc"; \
-	    fi; \
-	else \
-	  cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
-	  libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
-	  binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \
-	  moc="$$binpath/bin/moc"; \
-	fi; \
-	echo "KC_QT_CFLAGS=$$cflags" > $@; \
-	echo "KC_QT_LIBS=$$libs" >> $@; \
-	echo "KC_QT_MOC=$$moc" >> $@
-endif
-
-$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-
-ifeq ($(gconf-target),1)
--include $(obj)/.tmp_gtkcheck
-
-# GTK needs some extra effort, too...
-$(obj)/.tmp_gtkcheck:
-	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then		\
-		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
-			touch $@;								\
-		else									\
-			echo "*"; 							\
-			echo "* GTK+ is present but version >= 2.0.0 is required.";	\
-			echo "*";							\
-			false;								\
-		fi									\
-	else										\
-		echo "*"; 								\
-		echo "* Unable to find the GTK+ installation. Please make sure that"; 	\
-		echo "* the GTK+ 2.0 development package is correctly installed..."; 	\
-		echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
-		echo "*"; 								\
-		false;									\
-	fi
-endif
-
-$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
-
-$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
-
-$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
-
-$(obj)/gconf.o: $(obj)/lkc_defs.h
-
-$(obj)/%.moc: $(src)/%.h
-	$(KC_QT_MOC) -i $< -o $@
-
-$(obj)/lkc_defs.h: $(src)/lkc_proto.h
-	sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
-
-# Extract gconf menu items for I18N support
-$(obj)/gconf.glade.h: $(obj)/gconf.glade
-	intltool-extract --type=gettext/glade $(obj)/gconf.glade
-
-###
-# The following requires flex/bison/gperf
-# By default we use the _shipped versions, uncomment the following line if
-# you are modifying the flex/bison src.
-# LKC_GENPARSER := 1
-
-ifdef LKC_GENPARSER
-
-$(obj)/zconf.tab.c: $(src)/zconf.y
-$(obj)/lex.zconf.c: $(src)/zconf.l
-$(obj)/zconf.hash.c: $(src)/zconf.gperf
-
-%.tab.c: %.y
-	bison -l -b $* -p $(notdir $*) $<
-	cp $@ $@_shipped
-
-lex.%.c: %.l
-	flex -L -P$(notdir $*) -o$@ $<
-	cp $@ $@_shipped
-
-%.hash.c: %.gperf
-	gperf < $< > $@
-	cp $@ $@_shipped
-
-endif