grub: fix patch handling after AUTOTARGETS conversion

Closes #4093

AUTOTARGETS doesn't handle compressed patches, so the '400' patch did
not get applied.

Fix it by extracting the patch. With this, the '500' patch is no longer
needed.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

1 files changed, 49480 insertions, 0 deletions

diff --git a/boot/grub/grub.400-nic_update2.patch b/boot/grub/grub.400-nic_update2.patch
new file mode 100644
index 000000000..064c953f0
--- /dev/null
+++ b/boot/grub/grub.400-nic_update2.patch
@@ -0,0 +1,49480 @@
+Submitted By: Jim Gifford (patches at jg555 dot com)
+Date: 2005-08-31
+Initial Package Version: 0.97
+Origin: OpenSolaris, Joe Ciccone, Jim Gifford
+Upstream Status: N/A
+Description: Adds support for Forcedeth and other NIC's
+	     Fixes for GCC 4.x
+	     Removal of bad network drivers
+ 
+diff -Naur grub-0.97.orig/configure grub-0.97/configure
+--- grub-0.97.orig/configure	2005-05-08 02:48:12.000000000 +0000
++++ grub-0.97/configure	2005-09-01 00:15:48.000000000 +0000
+@@ -872,47 +872,32 @@
+   --disable-packet-retransmission
+                           turn off packet retransmission
+   --enable-pci-direct     access PCI directly instead of using BIOS
+-  --enable-3c509          enable 3Com509 driver
+-  --enable-3c529          enable 3Com529 driver
+   --enable-3c595          enable 3Com595 driver
+   --enable-3c90x          enable 3Com90x driver
+-  --enable-cs89x0         enable CS89x0 driver
+   --enable-davicom        enable Davicom driver
+-  --enable-depca          enable DEPCA and EtherWORKS driver
+-  --enable-eepro          enable Etherexpress Pro/10 driver
++  --enable-e1000          enable Etherexpress Pro/1000 driver
+   --enable-eepro100       enable Etherexpress Pro/100 driver
+   --enable-epic100        enable SMC 83c170 EPIC/100 driver
+-  --enable-3c507          enable 3Com507 driver
+-  --enable-exos205        enable EXOS205 driver
+-  --enable-ni5210         enable Racal-Interlan NI5210 driver
+-  --enable-lance          enable Lance PCI PCNet/32 driver
+-  --enable-ne2100         enable Novell NE2100 driver
+-  --enable-ni6510         enable Racal-Interlan NI6510 driver
++  --enable-forcedeth      enable Nvidia Geforce driver
+   --enable-natsemi        enable NatSemi DP8381x driver
+-  --enable-ni5010         enable Racal-Interlan NI5010 driver
+-  --enable-3c503          enable 3Com503 driver
+-  --enable-ne             enable NE1000/2000 ISA driver
++  --enable-ns83820        enable NS83820 driver
+   --enable-ns8390         enable NE2000 PCI driver
+-  --enable-wd             enable WD8003/8013, SMC8216/8416 driver
+-  --enable-otulip         enable old Tulip driver
++  --enable-pcnet32        enable AMD Lance/PCI PCNet/32 driver
++  --enable-pnic           enable Bochs Pseudo Nic driver
+   --enable-rtl8139        enable Realtek 8139 driver
++  --enable-r8169          enable Realtek 8169 driver
+   --enable-sis900         enable SIS 900 and SIS 7016 driver
+-  --enable-sk-g16         enable Schneider and Koch G16 driver
+-  --enable-smc9000        enable SMC9000 driver
+-  --enable-tiara          enable Tiara driver
++  --enable-tg3            enable Broadcom Tigon3 driver
+   --enable-tulip          enable Tulip driver
++  --enable-tlan           enable TI ThunderLAN driver
++  --enable-undi           enable PXE UNDI driver
+   --enable-via-rhine      enable Rhine-I/II driver
+-  --enable-w89c840        enable Winbond W89c840, Compex RL100-ATX driver
+-  --enable-3c503-shmem    use 3c503 shared memory mode
+-  --enable-3c503-aui      use AUI by default on 3c503 cards
++  --enable-w89c840        enable Winbond W89c840 driver
+   --enable-compex-rl2000-fix
+                           specify this if you have a Compex RL2000 PCI
+-  --enable-smc9000-scan=LIST
+-                          probe for SMC9000 I/O addresses using LIST
+   --enable-ne-scan=LIST   probe for NE base address using LIST
+   --enable-wd-default-mem=MEM
+                           set the default memory location for WD/SMC
+-  --enable-cs-scan=LIST   probe for CS89x0 base address using LIST
+   --enable-diskless       enable diskless support
+   --disable-hercules      disable hercules terminal support
+   --disable-serial        disable serial terminal support
+@@ -5559,7 +5544,7 @@
+ 
+ fi;
+ if test "x$enable_packet_retransmission" != xno; then
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1"
++  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1 -DCONFIG_PCI"
+ fi
+ 
+ # Check whether --enable-pci-direct or --disable-pci-direct was given.
+@@ -5571,26 +5556,6 @@
+   NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONFIG_PCI_DIRECT=1"
+ fi
+ 
+-# Check whether --enable-3c509 or --disable-3c509 was given.
+-if test "${enable_3c509+set}" = set; then
+-  enableval="$enable_3c509"
+-
+-fi;
+-if test "x$enable_3c509" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C509"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c509.o"
+-fi
+-
+-# Check whether --enable-3c529 or --disable-3c529 was given.
+-if test "${enable_3c529+set}" = set; then
+-  enableval="$enable_3c529"
+-
+-fi;
+-if test "x$enable_3c529" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C529=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c529.o"
+-fi
+-
+ # Check whether --enable-3c595 or --disable-3c595 was given.
+ if test "${enable_3c595+set}" = set; then
+   enableval="$enable_3c595"
+@@ -5611,16 +5576,6 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c90x.o"
+ fi
+ 
+-# Check whether --enable-cs89x0 or --disable-cs89x0 was given.
+-if test "${enable_cs89x0+set}" = set; then
+-  enableval="$enable_cs89x0"
+-
+-fi;
+-if test "x$enable_cs89x0" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_CS89X0=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS cs89x0.o"
+-fi
+-
+ # Check whether --enable-davicom or --disable-davicom was given.
+ if test "${enable_davicom+set}" = set; then
+   enableval="$enable_davicom"
+@@ -5631,24 +5586,14 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS davicom.o"
+ fi
+ 
+-# Check whether --enable-depca or --disable-depca was given.
+-if test "${enable_depca+set}" = set; then
+-  enableval="$enable_depca"
++# Check whether --enable-e1000 or --disable-e1000 was given.
++if test "${enable_e1000+set}" = set; then
++  enableval="$enable_e1000"
+ 
+ fi;
+-if test "x$enable_depca" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DEPCA=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS depca.o"
+-fi
+-
+-# Check whether --enable-eepro or --disable-eepro was given.
+-if test "${enable_eepro+set}" = set; then
+-  enableval="$enable_eepro"
+-
+-fi;
+-if test "x$enable_eepro" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro.o"
++if test "x$enable_e1000" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_E1000=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS e1000.o"
+ fi
+ 
+ # Check whether --enable-eepro100 or --disable-eepro100 was given.
+@@ -5671,64 +5616,14 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS epic100.o"
+ fi
+ 
+-# Check whether --enable-3c507 or --disable-3c507 was given.
+-if test "${enable_3c507+set}" = set; then
+-  enableval="$enable_3c507"
+-
+-fi;
+-if test "x$enable_3c507" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C507=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c507.o"
+-fi
+-
+-# Check whether --enable-exos205 or --disable-exos205 was given.
+-if test "${enable_exos205+set}" = set; then
+-  enableval="$enable_exos205"
+-
+-fi;
+-if test "x$enable_exos205" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EXOS205=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS exos205.o"
+-fi
+-
+-# Check whether --enable-ni5210 or --disable-ni5210 was given.
+-if test "${enable_ni5210+set}" = set; then
+-  enableval="$enable_ni5210"
+-
+-fi;
+-if test "x$enable_ni5210" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5210=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5210.o"
+-fi
+-
+-# Check whether --enable-lance or --disable-lance was given.
+-if test "${enable_lance+set}" = set; then
+-  enableval="$enable_lance"
+-
+-fi;
+-if test "x$enable_lance" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_LANCE=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS lance.o"
+-fi
+-
+-# Check whether --enable-ne2100 or --disable-ne2100 was given.
+-if test "${enable_ne2100+set}" = set; then
+-  enableval="$enable_ne2100"
+-
+-fi;
+-if test "x$enable_ne2100" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE2100=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne2100.o"
+-fi
+-
+-# Check whether --enable-ni6510 or --disable-ni6510 was given.
+-if test "${enable_ni6510+set}" = set; then
+-  enableval="$enable_ni6510"
++# Check whether --enable-forcedeth or --disable-forcedeth was given.
++if test "${enable_forcedeth+set}" = set; then
++  enableval="$enable_forcedeth"
+ 
+ fi;
+-if test "x$enable_ni6510" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI6510=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni6510.o"
++if test "x$enable_forcedeth" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_FORCEDETH=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS forcedeth.o"
+ fi
+ 
+ # Check whether --enable-natsemi or --disable-natsemi was given.
+@@ -5741,34 +5636,14 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS natsemi.o"
+ fi
+ 
+-# Check whether --enable-ni5010 or --disable-ni5010 was given.
+-if test "${enable_ni5010+set}" = set; then
+-  enableval="$enable_ni5010"
++# Check whether --enable-ns83820 or --disable-ns83820 was given.
++if test "${enable_ns83820+set}" = set; then
++  enableval="$enable_ns83820"
+ 
+ fi;
+-if test "x$enable_ni5010" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5010=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5010.o"
+-fi
+-
+-# Check whether --enable-3c503 or --disable-3c503 was given.
+-if test "${enable_3c503+set}" = set; then
+-  enableval="$enable_3c503"
+-
+-fi;
+-if test "x$enable_3c503" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C503=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c503.o"
+-fi
+-
+-# Check whether --enable-ne or --disable-ne was given.
+-if test "${enable_ne+set}" = set; then
+-  enableval="$enable_ne"
+-
+-fi;
+-if test "x$enable_ne" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne.o"
++if test "x$enable_ns83820" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NS83820=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns83820.o"
+ fi
+ 
+ # Check whether --enable-ns8390 or --disable-ns8390 was given.
+@@ -5781,24 +5656,24 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns8390.o"
+ fi
+ 
+-# Check whether --enable-wd or --disable-wd was given.
+-if test "${enable_wd+set}" = set; then
+-  enableval="$enable_wd"
++# Check whether --enable-pcnet32 or --disable-pcnet32 was given.
++if test "${enable_pcnet32+set}" = set; then
++  enableval="$enable_pcnet32"
+ 
+ fi;
+-if test "x$enable_wd" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_WD=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS wd.o"
++if test "x$enable_pcnet32" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_PCNET32=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS pcnet32.o"
+ fi
+ 
+-# Check whether --enable-otulip or --disable-otulip was given.
+-if test "${enable_otulip+set}" = set; then
+-  enableval="$enable_otulip"
++# Check whether --enable-pnic or --disable-pnic was given.
++if test "${enable_pnic+set}" = set; then
++  enableval="$enable_pnic"
+ 
+ fi;
+-if test "x$enable_otulip" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_OTULIP=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS otulip.o"
++if test "x$enable_pnic" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_PNIC=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS pnic.o"
+ fi
+ 
+ # Check whether --enable-rtl8139 or --disable-rtl8139 was given.
+@@ -5811,6 +5686,16 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS rtl8139.o"
+ fi
+ 
++# Check whether --enable-r8169 or --disable-r8169 was given.
++if test "${enable_r8169+set}" = set; then
++  enableval="$enable_r8169"
++
++fi;
++if test "x$enable_r8169" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_R8169=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS r8169.o"
++fi
++
+ # Check whether --enable-sis900 or --disable-sis900 was given.
+ if test "${enable_sis900+set}" = set; then
+   enableval="$enable_sis900"
+@@ -5821,34 +5706,14 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS sis900.o"
+ fi
+ 
+-# Check whether --enable-sk-g16 or --disable-sk-g16 was given.
+-if test "${enable_sk_g16+set}" = set; then
+-  enableval="$enable_sk_g16"
+-
+-fi;
+-if test "x$enable_sk_g16" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SK_G16=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS sk_g16.o"
+-fi
+-
+-# Check whether --enable-smc9000 or --disable-smc9000 was given.
+-if test "${enable_smc9000+set}" = set; then
+-  enableval="$enable_smc9000"
+-
+-fi;
+-if test "x$enable_smc9000" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SMC9000=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS smc9000.o"
+-fi
+-
+-# Check whether --enable-tiara or --disable-tiara was given.
+-if test "${enable_tiara+set}" = set; then
+-  enableval="$enable_tiara"
++# Check whether --enable-tg3 or --disable-tg3 was given.
++if test "${enable_tg3+set}" = set; then
++  enableval="$enable_tg3"
+ 
+ fi;
+-if test "x$enable_tiara" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TIARA=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS tiara.o"
++if test "x$enable_tg3" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TG3=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS tg3.o"
+ fi
+ 
+ # Check whether --enable-tulip or --disable-tulip was given.
+@@ -5861,6 +5726,16 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS tulip.o"
+ fi
+ 
++# Check whether --enable-tlan or --disable-tlan was given.
++if test "${enable_tlan+set}" = set; then
++  enableval="$enable_tlan"
++
++fi;
++if test "x$enable_tlan" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TLAN=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS tlan.o"
++fi
++
+ # Check whether --enable-via-rhine or --disable-via-rhine was given.
+ if test "${enable_via_rhine+set}" = set; then
+   enableval="$enable_via_rhine"
+@@ -5895,24 +5770,6 @@
+   FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_TFTP=1"
+ fi
+ 
+-# Check whether --enable-3c503-shmem or --disable-3c503-shmem was given.
+-if test "${enable_3c503_shmem+set}" = set; then
+-  enableval="$enable_3c503_shmem"
+-
+-fi;
+-if test "x$enable_3c503_shmem" = xyes; then
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_SHMEM=1"
+-fi
+-
+-# Check whether --enable-3c503-aui or --disable-3c503-aui was given.
+-if test "${enable_3c503_aui+set}" = set; then
+-  enableval="$enable_3c503_aui"
+-
+-fi;
+-if test "x$enable_3c503_aui" = xyes; then
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_AUI=1"
+-fi
+-
+ # Check whether --enable-compex-rl2000-fix or --disable-compex-rl2000-fix was given.
+ if test "${enable_compex_rl2000_fix+set}" = set; then
+   enableval="$enable_compex_rl2000_fix"
+@@ -5922,12 +5779,6 @@
+   NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCOMPEX_RL2000_FIX=1"
+ fi
+ 
+-# Check whether --enable-smc9000-scan or --disable-smc9000-scan was given.
+-if test "${enable_smc9000_scan+set}" = set; then
+-  enableval="$enable_smc9000_scan"
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DSMC9000_SCAN=$enable_smc9000_scan"
+-fi;
+-
+ # Check whether --enable-ne-scan or --disable-ne-scan was given.
+ if test "${enable_ne_scan+set}" = set; then
+   enableval="$enable_ne_scan"
+@@ -5944,12 +5795,6 @@
+   NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=0xCC000"
+ fi;
+ 
+-# Check whether --enable-cs-scan or --disable-cs-scan was given.
+-if test "${enable_cs_scan+set}" = set; then
+-  enableval="$enable_cs_scan"
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCS_SCAN=$enable_cs_scan"
+-fi;
+-
+ # Check whether --enable-diskless or --disable-diskless was given.
+ if test "${enable_diskless+set}" = set; then
+   enableval="$enable_diskless"
+diff -Naur grub-0.97.orig/configure.ac grub-0.97/configure.ac
+--- grub-0.97.orig/configure.ac	2005-05-08 02:36:03.000000000 +0000
++++ grub-0.97/configure.ac	2005-09-01 00:16:05.000000000 +0000
+@@ -317,7 +317,7 @@
+   [  --disable-packet-retransmission
+                           turn off packet retransmission])
+ if test "x$enable_packet_retransmission" != xno; then
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1"
++  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1 -DCONFIG_PCI"
+ fi
+ 
+ AC_ARG_ENABLE(pci-direct,
+@@ -327,20 +327,6 @@
+ fi
+ 
+ dnl Device drivers.
+-AC_ARG_ENABLE(3c509,
+-  [  --enable-3c509          enable 3Com509 driver])
+-if test "x$enable_3c509" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C509"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c509.o"
+-fi
+-
+-AC_ARG_ENABLE(3c529,
+-  [  --enable-3c529          enable 3Com529 driver])
+-if test "x$enable_3c529" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C529=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c529.o"
+-fi
+-
+ AC_ARG_ENABLE(3c595,
+   [  --enable-3c595          enable 3Com595 driver])
+ if test "x$enable_3c595" = xyes; then
+@@ -355,13 +341,6 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c90x.o"
+ fi
+ 
+-AC_ARG_ENABLE(cs89x0,
+-  [  --enable-cs89x0         enable CS89x0 driver])
+-if test "x$enable_cs89x0" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_CS89X0=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS cs89x0.o"
+-fi
+-
+ AC_ARG_ENABLE(davicom,
+   [  --enable-davicom        enable Davicom driver])
+ if test "x$enable_davicom" = xyes; then
+@@ -369,18 +348,11 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS davicom.o"
+ fi
+ 
+-AC_ARG_ENABLE(depca,
+-  [  --enable-depca          enable DEPCA and EtherWORKS driver])
+-if test "x$enable_depca" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DEPCA=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS depca.o"
+-fi
+-
+-AC_ARG_ENABLE(eepro,
+-  [  --enable-eepro          enable Etherexpress Pro/10 driver])
+-if test "x$enable_eepro" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro.o"
++AC_ARG_ENABLE(e1000,
++  [  --enable-e1000          enable Etherexpress Pro/1000 driver])
++if test "x$enable_e1000" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_E1000=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS e1000.o"
+ fi
+ 
+ AC_ARG_ENABLE(eepro100,
+@@ -397,46 +369,11 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS epic100.o"
+ fi
+ 
+-AC_ARG_ENABLE(3c507,
+-  [  --enable-3c507          enable 3Com507 driver])
+-if test "x$enable_3c507" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C507=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c507.o"
+-fi
+-
+-AC_ARG_ENABLE(exos205,
+-  [  --enable-exos205        enable EXOS205 driver])
+-if test "x$enable_exos205" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EXOS205=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS exos205.o"
+-fi
+-
+-AC_ARG_ENABLE(ni5210,
+-  [  --enable-ni5210         enable Racal-Interlan NI5210 driver])
+-if test "x$enable_ni5210" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5210=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5210.o"
+-fi
+-
+-AC_ARG_ENABLE(lance,
+-  [  --enable-lance          enable Lance PCI PCNet/32 driver])
+-if test "x$enable_lance" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_LANCE=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS lance.o"
+-fi
+-
+-AC_ARG_ENABLE(ne2100,
+-  [  --enable-ne2100         enable Novell NE2100 driver])
+-if test "x$enable_ne2100" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE2100=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne2100.o"
+-fi
+-
+-AC_ARG_ENABLE(ni6510,
+-  [  --enable-ni6510         enable Racal-Interlan NI6510 driver])
+-if test "x$enable_ni6510" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI6510=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni6510.o"
++AC_ARG_ENABLE(forcedeth,
++  [  --enable-forcedeth      enable Nvidia Geforce driver])
++if test "x$enable_forcedeth" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_FORCEDETH=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS forcedeth.o"
+ fi
+ 
+ AC_ARG_ENABLE(natsemi,
+@@ -446,25 +383,11 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS natsemi.o"
+ fi
+ 
+-AC_ARG_ENABLE(ni5010,
+-  [  --enable-ni5010         enable Racal-Interlan NI5010 driver])
+-if test "x$enable_ni5010" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5010=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5010.o"
+-fi
+-
+-AC_ARG_ENABLE(3c503,
+-  [  --enable-3c503          enable 3Com503 driver])
+-if test "x$enable_3c503" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C503=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c503.o"
+-fi
+-
+-AC_ARG_ENABLE(ne,
+-  [  --enable-ne             enable NE1000/2000 ISA driver])
+-if test "x$enable_ne" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne.o"
++AC_ARG_ENABLE(ns83820,
++  [  --enable-ns83820        enable NS83820 driver])
++if test "x$enable_ns83820" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NS83820=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns83820.o"
+ fi
+ 
+ AC_ARG_ENABLE(ns8390,
+@@ -474,18 +397,18 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns8390.o"
+ fi
+ 
+-AC_ARG_ENABLE(wd,
+-  [  --enable-wd             enable WD8003/8013, SMC8216/8416 driver])
+-if test "x$enable_wd" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_WD=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS wd.o"
++AC_ARG_ENABLE(pcnet32,
++  [  --enable-pcnet32        enable AMD Lance/PCI PCNet/32 driver])
++if test "x$enable_pcnet32" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_PCNET32=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS pcnet32.o"
+ fi
+ 
+-AC_ARG_ENABLE(otulip,
+-  [  --enable-otulip         enable old Tulip driver])
+-if test "x$enable_otulip" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_OTULIP=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS otulip.o"
++AC_ARG_ENABLE(pnic,
++  [  --enable-pnic           enable Bochs Pseudo Nic driver])
++if test "x$enable_pnic" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_PNIC=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS pnic.o"
+ fi
+ 
+ AC_ARG_ENABLE(rtl8139,
+@@ -495,6 +418,13 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS rtl8139.o"
+ fi
+ 
++AC_ARG_ENABLE(r8169,
++  [  --enable-r8169          enable Realtek 8169 driver])
++if test "x$enable_r8169" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_R8169=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS r8169.o"
++fi
++
+ AC_ARG_ENABLE(sis900,
+   [  --enable-sis900         enable SIS 900 and SIS 7016 driver])
+ if test "x$enable_sis900" = xyes; then
+@@ -502,25 +432,11 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS sis900.o"
+ fi
+ 
+-AC_ARG_ENABLE(sk-g16,
+-  [  --enable-sk-g16         enable Schneider and Koch G16 driver])
+-if test "x$enable_sk_g16" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SK_G16=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS sk_g16.o"
+-fi
+-
+-AC_ARG_ENABLE(smc9000,
+-  [  --enable-smc9000        enable SMC9000 driver])
+-if test "x$enable_smc9000" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SMC9000=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS smc9000.o"
+-fi
+-
+-AC_ARG_ENABLE(tiara,
+-  [  --enable-tiara          enable Tiara driver])
+-if test "x$enable_tiara" = xyes; then
+-  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TIARA=1"
+-  NETBOOT_DRIVERS="$NETBOOT_DRIVERS tiara.o"
++AC_ARG_ENABLE(tg3,
++  [  --enable-tg3            enable Broadcom Tigon3 driver])
++if test "x$enable_tg3" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TG3=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS tg3.o"
+ fi
+ 
+ AC_ARG_ENABLE(tulip,
+@@ -530,6 +446,13 @@
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS tulip.o"
+ fi
+ 
++AC_ARG_ENABLE(tlan,
++  [  --enable-tlan           enable TI ThunderLAN driver])
++if test "x$enable_tlan" = xyes; then
++  NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TLAN=1"
++  NETBOOT_DRIVERS="$NETBOOT_DRIVERS tlan.o"
++fi
++
+ AC_ARG_ENABLE(via-rhine,
+   [  --enable-via-rhine      enable Rhine-I/II driver])
+ if test "x$enable_via_rhine" = xyes; then
+@@ -538,7 +461,7 @@
+ fi
+ 
+ AC_ARG_ENABLE(w89c840,
+-  [  --enable-w89c840        enable Winbond W89c840, Compex RL100-ATX driver])
++  [  --enable-w89c840        enable Winbond W89c840 driver])
+ if test "x$enable_w89c840" = xyes; then
+   NET_CFLAGS="$NET_CFLAGS -DINCLUDE_W89C840=1"
+   NETBOOT_DRIVERS="$NETBOOT_DRIVERS w89c840.o"
+@@ -550,19 +473,7 @@
+   FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_TFTP=1"
+ fi
+ 
+-dnl Extra options.
+-AC_ARG_ENABLE(3c503-shmem,
+-  [  --enable-3c503-shmem    use 3c503 shared memory mode])
+-if test "x$enable_3c503_shmem" = xyes; then
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_SHMEM=1"
+-fi
+-
+-AC_ARG_ENABLE(3c503-aui,
+-  [  --enable-3c503-aui      use AUI by default on 3c503 cards])
+-if test "x$enable_3c503_aui" = xyes; then
+-  NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_AUI=1"
+-fi
+-
++dnl extra flag for ns8390.c
+ AC_ARG_ENABLE(compex-rl2000-fix,
+   [  --enable-compex-rl2000-fix
+                           specify this if you have a Compex RL2000 PCI])
+@@ -570,11 +481,6 @@
+   NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCOMPEX_RL2000_FIX=1"
+ fi
+ 
+-AC_ARG_ENABLE(smc9000-scan,
+-  [  --enable-smc9000-scan=LIST
+-                          probe for SMC9000 I/O addresses using LIST],
+-  [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DSMC9000_SCAN=$enable_smc9000_scan"])
+-
+ AC_ARG_ENABLE(ne-scan,
+   [  --enable-ne-scan=LIST   probe for NE base address using LIST],
+   [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=$enable_ne_scan"],
+@@ -586,10 +492,6 @@
+   [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=$enable_wd_default_mem"],
+   [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=0xCC000"])
+ 
+-AC_ARG_ENABLE(cs-scan,
+-  [  --enable-cs-scan=LIST   probe for CS89x0 base address using LIST],
+-  [NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCS_SCAN=$enable_cs_scan"])
+-
+ dnl Diskless
+ AC_ARG_ENABLE(diskless,
+   [  --enable-diskless       enable diskless support])
+diff -Naur grub-0.97.orig/netboot/3c509.h grub-0.97/netboot/3c509.h
+--- grub-0.97.orig/netboot/3c509.h	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/3c509.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,397 +0,0 @@
+-/*
+- * Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
+- *
+- * Redistribution and use in source and binary forms, with or without
+- * modification, are permitted provided that the following conditions are
+- * met: 1. Redistributions of source code must retain the above copyright
+- * notice, this list of conditions and the following disclaimer. 2. The name
+- * of the author may not be used to endorse or promote products derived from
+- * this software withough specific prior written permission
+- *
+- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+- * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+- *
+- * if_epreg.h,v 1.4 1994/11/13 10:12:37 gibbs Exp Modified by:
+- *
+- October 2, 1994
+-
+- Modified by: Andres Vega Garcia
+-
+- INRIA - Sophia Antipolis, France
+- e-mail: avega@sophia.inria.fr
+- finger: avega@pax.inria.fr
+-
+- */
+-
+-/*
+- * Ethernet software status per interface.
+- */
+-/*
+- * Some global constants
+- */
+-
+-#define TX_INIT_RATE		16
+-#define TX_INIT_MAX_RATE	64
+-#define RX_INIT_LATENCY		64
+-#define RX_INIT_EARLY_THRESH	64
+-#define MIN_RX_EARLY_THRESHF	16	/* not less than ether_header */
+-#define MIN_RX_EARLY_THRESHL	4
+-
+-#define EEPROMSIZE	0x40
+-#define MAX_EEPROMBUSY	1000
+-#define EP_LAST_TAG	0xd7
+-#define EP_MAX_BOARDS	16
+-#define EP_ID_PORT	0x100
+-
+-/*
+- * some macros to acces long named fields
+- */
+-#define IS_BASE (eth_nic_base)
+-#define BASE	(eth_nic_base)
+-
+-/*
+- * Commands to read/write EEPROM trough EEPROM command register (Window 0,
+- * Offset 0xa)
+- */
+-#define EEPROM_CMD_RD	0x0080	/* Read:  Address required (5 bits) */
+-#define EEPROM_CMD_WR	0x0040	/* Write: Address required (5 bits) */
+-#define EEPROM_CMD_ERASE 0x00c0	/* Erase: Address required (5 bits) */
+-#define EEPROM_CMD_EWEN	0x0030	/* Erase/Write Enable: No data required */
+-
+-#define EEPROM_BUSY		(1<<15)
+-#define EEPROM_TST_MODE		(1<<14)
+-
+-/*
+- * Some short functions, worth to let them be a macro
+- */
+-#define is_eeprom_busy(b) (inw((b)+EP_W0_EEPROM_COMMAND)&EEPROM_BUSY)
+-#define GO_WINDOW(x)	outw(WINDOW_SELECT|(x), BASE+EP_COMMAND)
+-
+-/**************************************************************************
+- *
+- * These define the EEPROM data structure.  They are used in the probe
+- * function to verify the existance of the adapter after having sent
+- * the ID_Sequence.
+- *
+- * There are others but only the ones we use are defined here.
+- *
+- **************************************************************************/
+-
+-#define EEPROM_NODE_ADDR_0	0x0	/* Word */
+-#define EEPROM_NODE_ADDR_1	0x1	/* Word */
+-#define EEPROM_NODE_ADDR_2	0x2	/* Word */
+-#define EEPROM_PROD_ID		0x3	/* 0x9[0-f]50 */
+-#define EEPROM_MFG_ID		0x7	/* 0x6d50 */
+-#define EEPROM_ADDR_CFG		0x8	/* Base addr */
+-#define EEPROM_RESOURCE_CFG	0x9	/* IRQ. Bits 12-15 */
+-
+-/**************************************************************************
+- *
+- * These are the registers for the 3Com 3c509 and their bit patterns when
+- * applicable.  They have been taken out the the "EtherLink III Parallel
+- * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual
+- * from 3com.
+- *
+- **************************************************************************/
+-
+-#define EP_COMMAND		0x0e	/* Write. BASE+0x0e is always a
+-					 * command reg. */
+-#define EP_STATUS		0x0e	/* Read. BASE+0x0e is always status
+-					 * reg. */
+-#define EP_WINDOW		0x0f	/* Read. BASE+0x0f is always window
+-					 * reg. */
+-/*
+- * Window 0 registers. Setup.
+- */
+-/* Write */
+-#define EP_W0_EEPROM_DATA	0x0c
+-#define EP_W0_EEPROM_COMMAND	0x0a
+-#define EP_W0_RESOURCE_CFG	0x08
+-#define EP_W0_ADDRESS_CFG	0x06
+-#define EP_W0_CONFIG_CTRL	0x04
+-/* Read */
+-#define EP_W0_PRODUCT_ID	0x02
+-#define EP_W0_MFG_ID		0x00
+-
+-/*
+- * Window 1 registers. Operating Set.
+- */
+-/* Write */
+-#define EP_W1_TX_PIO_WR_2	0x02
+-#define EP_W1_TX_PIO_WR_1	0x00
+-/* Read */
+-#define EP_W1_FREE_TX		0x0c
+-#define EP_W1_TX_STATUS		0x0b	/* byte */
+-#define EP_W1_TIMER		0x0a	/* byte */
+-#define EP_W1_RX_STATUS		0x08
+-#define EP_W1_RX_PIO_RD_2	0x02
+-#define EP_W1_RX_PIO_RD_1	0x00
+-
+-/*
+- * Window 2 registers. Station Address Setup/Read
+- */
+-/* Read/Write */
+-#define EP_W2_ADDR_5		0x05
+-#define EP_W2_ADDR_4		0x04
+-#define EP_W2_ADDR_3		0x03
+-#define EP_W2_ADDR_2		0x02
+-#define EP_W2_ADDR_1		0x01
+-#define EP_W2_ADDR_0		0x00
+-
+-/*
+- * Window 3 registers.  FIFO Management.
+- */
+-/* Read */
+-#define EP_W3_FREE_TX		0x0c
+-#define EP_W3_FREE_RX		0x0a
+-
+-/*
+- * Window 4 registers. Diagnostics.
+- */
+-/* Read/Write */
+-#define EP_W4_MEDIA_TYPE	0x0a
+-#define EP_W4_CTRLR_STATUS	0x08
+-#define EP_W4_NET_DIAG		0x06
+-#define EP_W4_FIFO_DIAG		0x04
+-#define EP_W4_HOST_DIAG		0x02
+-#define EP_W4_TX_DIAG		0x00
+-
+-/*
+- * Window 5 Registers.  Results and Internal status.
+- */
+-/* Read */
+-#define EP_W5_READ_0_MASK	0x0c
+-#define EP_W5_INTR_MASK		0x0a
+-#define EP_W5_RX_FILTER		0x08
+-#define EP_W5_RX_EARLY_THRESH	0x06
+-#define EP_W5_TX_AVAIL_THRESH	0x02
+-#define EP_W5_TX_START_THRESH	0x00
+-
+-/*
+- * Window 6 registers. Statistics.
+- */
+-/* Read/Write */
+-#define TX_TOTAL_OK		0x0c
+-#define RX_TOTAL_OK		0x0a
+-#define TX_DEFERRALS		0x08
+-#define RX_FRAMES_OK		0x07
+-#define TX_FRAMES_OK		0x06
+-#define RX_OVERRUNS		0x05
+-#define TX_COLLISIONS		0x04
+-#define TX_AFTER_1_COLLISION	0x03
+-#define TX_AFTER_X_COLLISIONS	0x02
+-#define TX_NO_SQE		0x01
+-#define TX_CD_LOST		0x00
+-
+-/****************************************
+- *
+- * Register definitions.
+- *
+- ****************************************/
+-
+-/*
+- * Command register. All windows.
+- *
+- * 16 bit register.
+- *     15-11:  5-bit code for command to be executed.
+- *     10-0:   11-bit arg if any. For commands with no args;
+- *	      this can be set to anything.
+- */
+-#define GLOBAL_RESET		(unsigned short) 0x0000	/* Wait at least 1ms
+-							 * after issuing */
+-#define WINDOW_SELECT		(unsigned short) (0x1<<11)
+-#define START_TRANSCEIVER	(unsigned short) (0x2<<11)	/* Read ADDR_CFG reg to
+-							 * determine whether
+-							 * this is needed. If
+-							 * so; wait 800 uSec
+-							 * before using trans-
+-							 * ceiver. */
+-#define RX_DISABLE		(unsigned short) (0x3<<11)	/* state disabled on
+-							 * power-up */
+-#define RX_ENABLE		(unsigned short) (0x4<<11)
+-#define RX_RESET		(unsigned short) (0x5<<11)
+-#define RX_DISCARD_TOP_PACK	(unsigned short) (0x8<<11)
+-#define TX_ENABLE		(unsigned short) (0x9<<11)
+-#define TX_DISABLE		(unsigned short) (0xa<<11)
+-#define TX_RESET		(unsigned short) (0xb<<11)
+-#define REQ_INTR		(unsigned short) (0xc<<11)
+-#define SET_INTR_MASK		(unsigned short) (0xe<<11)
+-#define SET_RD_0_MASK		(unsigned short) (0xf<<11)
+-#define SET_RX_FILTER		(unsigned short) (0x10<<11)
+-#define FIL_INDIVIDUAL	(unsigned short) (0x1)
+-#define FIL_GROUP		(unsigned short) (0x2)
+-#define FIL_BRDCST	(unsigned short) (0x4)
+-#define FIL_ALL		(unsigned short) (0x8)
+-#define SET_RX_EARLY_THRESH	(unsigned short) (0x11<<11)
+-#define SET_TX_AVAIL_THRESH	(unsigned short) (0x12<<11)
+-#define SET_TX_START_THRESH	(unsigned short) (0x13<<11)
+-#define STATS_ENABLE		(unsigned short) (0x15<<11)
+-#define STATS_DISABLE		(unsigned short) (0x16<<11)
+-#define STOP_TRANSCEIVER	(unsigned short) (0x17<<11)
+-/*
+- * The following C_* acknowledge the various interrupts. Some of them don't
+- * do anything.  See the manual.
+- */
+-#define ACK_INTR		(unsigned short) (0x6800)
+-#define C_INTR_LATCH	(unsigned short) (ACK_INTR|0x1)
+-#define C_CARD_FAILURE	(unsigned short) (ACK_INTR|0x2)
+-#define C_TX_COMPLETE	(unsigned short) (ACK_INTR|0x4)
+-#define C_TX_AVAIL	(unsigned short) (ACK_INTR|0x8)
+-#define C_RX_COMPLETE	(unsigned short) (ACK_INTR|0x10)
+-#define C_RX_EARLY	(unsigned short) (ACK_INTR|0x20)
+-#define C_INT_RQD		(unsigned short) (ACK_INTR|0x40)
+-#define C_UPD_STATS	(unsigned short) (ACK_INTR|0x80)
+-
+-/*
+- * Status register. All windows.
+- *
+- *     15-13:  Window number(0-7).
+- *     12:     Command_in_progress.
+- *     11:     reserved.
+- *     10:     reserved.
+- *     9:      reserved.
+- *     8:      reserved.
+- *     7:      Update Statistics.
+- *     6:      Interrupt Requested.
+- *     5:      RX Early.
+- *     4:      RX Complete.
+- *     3:      TX Available.
+- *     2:      TX Complete.
+- *     1:      Adapter Failure.
+- *     0:      Interrupt Latch.
+- */
+-#define S_INTR_LATCH		(unsigned short) (0x1)
+-#define S_CARD_FAILURE		(unsigned short) (0x2)
+-#define S_TX_COMPLETE		(unsigned short) (0x4)
+-#define S_TX_AVAIL		(unsigned short) (0x8)
+-#define S_RX_COMPLETE		(unsigned short) (0x10)
+-#define S_RX_EARLY		(unsigned short) (0x20)
+-#define S_INT_RQD		(unsigned short) (0x40)
+-#define S_UPD_STATS		(unsigned short) (0x80)
+-#define S_5_INTS		(S_CARD_FAILURE|S_TX_COMPLETE|\
+-				 S_TX_AVAIL|S_RX_COMPLETE|S_RX_EARLY)
+-#define S_COMMAND_IN_PROGRESS	(unsigned short) (0x1000)
+-
+-/*
+- * FIFO Registers.
+- * RX Status. Window 1/Port 08
+- *
+- *     15:     Incomplete or FIFO empty.
+- *     14:     1: Error in RX Packet   0: Incomplete or no error.
+- *     13-11:  Type of error.
+- *	      1000 = Overrun.
+- *	      1011 = Run Packet Error.
+- *	      1100 = Alignment Error.
+- *	      1101 = CRC Error.
+- *	      1001 = Oversize Packet Error (>1514 bytes)
+- *	      0010 = Dribble Bits.
+- *	      (all other error codes, no errors.)
+- *
+- *     10-0:   RX Bytes (0-1514)
+- */
+-#define ERR_RX_INCOMPLETE	(unsigned short) (0x1<<15)
+-#define ERR_RX			(unsigned short) (0x1<<14)
+-#define ERR_RX_OVERRUN		(unsigned short) (0x8<<11)
+-#define ERR_RX_RUN_PKT		(unsigned short) (0xb<<11)
+-#define ERR_RX_ALIGN		(unsigned short) (0xc<<11)
+-#define ERR_RX_CRC		(unsigned short) (0xd<<11)
+-#define ERR_RX_OVERSIZE		(unsigned short) (0x9<<11)
+-#define ERR_RX_DRIBBLE		(unsigned short) (0x2<<11)
+-
+-/*
+- * FIFO Registers.
+- * TX Status. Window 1/Port 0B
+- *
+- *   Reports the transmit status of a completed transmission. Writing this
+- *   register pops the transmit completion stack.
+- *
+- *   Window 1/Port 0x0b.
+- *
+- *     7:      Complete
+- *     6:      Interrupt on successful transmission requested.
+- *     5:      Jabber Error (TP Only, TX Reset required. )
+- *     4:      Underrun (TX Reset required. )
+- *     3:      Maximum Collisions.
+- *     2:      TX Status Overflow.
+- *     1-0:    Undefined.
+- *
+- */
+-#define TXS_COMPLETE		0x80
+-#define TXS_SUCCES_INTR_REQ		0x40
+-#define TXS_JABBER		0x20
+-#define TXS_UNDERRUN		0x10
+-#define TXS_MAX_COLLISION	0x8
+-#define TXS_STATUS_OVERFLOW	0x4
+-
+-/*
+- * Configuration control register.
+- * Window 0/Port 04
+- */
+-/* Read */
+-#define IS_AUI				(1<<13)
+-#define IS_BNC				(1<<12)
+-#define IS_UTP				(1<<9)
+-/* Write */
+-#define ENABLE_DRQ_IRQ			0x0001
+-#define W0_P4_CMD_RESET_ADAPTER		0x4
+-#define W0_P4_CMD_ENABLE_ADAPTER	0x1
+-/*
+- * Media type and status.
+- * Window 4/Port 0A
+- */
+-#define ENABLE_UTP			0xc0
+-#define DISABLE_UTP			0x0
+-
+-/*
+- * Resource control register
+- */
+-
+-#define SET_IRQ(i)	( ((i)<<12) | 0xF00) /* set IRQ i */
+-
+-/*
+- * Receive status register
+- */
+-
+-#define RX_BYTES_MASK			(unsigned short) (0x07ff)
+-#define RX_ERROR	0x4000
+-#define RX_INCOMPLETE	0x8000
+-
+-
+-/*
+- * Misc defines for various things.
+- */
+-#define ACTIVATE_ADAPTER_TO_CONFIG	0xff /* to the id_port */
+-#define MFG_ID				0x6d50 /* in EEPROM and W0 ADDR_CONFIG */
+-#define PROD_ID				0x9150
+-
+-#define AUI				0x1
+-#define BNC				0x2
+-#define UTP				0x4
+-
+-#define RX_BYTES_MASK			(unsigned short) (0x07ff)
+-
+- /* EISA support */
+-#define EP_EISA_START			0x1000
+-#define EP_EISA_W0			0x0c80
+-
+-#ifdef	INCLUDE_3C529
+- /* MCA support */
+-#define MCA_MOTHERBOARD_SETUP_REG	0x94
+-#define MCA_ADAPTER_SETUP_REG		0x96
+-#define MCA_MAX_SLOT_NR			8
+-#define MCA_POS_REG(n)			(0x100+(n))
+-#endif
+-
+-/*
+- * Local variables:
+- *  c-basic-offset: 8
+- * End:
+- */
+diff -Naur grub-0.97.orig/netboot/3c595.c grub-0.97/netboot/3c595.c
+--- grub-0.97.orig/netboot/3c595.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/3c595.c	2005-08-31 19:03:35.000000000 +0000
+@@ -20,6 +20,7 @@
+ *
+ *  Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
+ *
++* timlegge	08-24-2003	Add Multicast Support
+ */
+ 
+ /* #define EDEBUG */
+@@ -30,7 +31,7 @@
+ #include "3c595.h"
+ #include "timer.h"
+ 
+-static unsigned short	eth_nic_base, eth_asic_base;
++static unsigned short	eth_nic_base;
+ static unsigned short	vx_connector, vx_connectors;
+ 
+ static struct connector_entry {
+@@ -57,14 +58,12 @@
+ static void vxgetlink(void);
+ static void vxsetlink(void);
+ 
+-#define	udelay(n)	waiton_timer2(((n)*TICKS_PER_MS)/1000)
+-
+ /**************************************************************************
+ ETH_RESET - Reset adapter
+ ***************************************************************************/
+ static void t595_reset(struct nic *nic)
+ {
+-	int i, j;
++	int i;
+ 
+ 	/***********************************************************
+ 			Reset 3Com 595 card
+@@ -133,7 +132,7 @@
+ 	outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
+ 
+ 	outw(SET_RX_FILTER | FIL_INDIVIDUAL |
+-	    FIL_BRDCST, BASE + VX_COMMAND);
++	    FIL_BRDCST|FIL_MULTICAST, BASE + VX_COMMAND);
+ 
+ 	vxsetlink();
+ /*{
+@@ -225,10 +224,9 @@
+ /**************************************************************************
+ ETH_POLL - Wait for a frame
+ ***************************************************************************/
+-static int t595_poll(struct nic *nic)
++static int t595_poll(struct nic *nic, int retrieve)
+ {
+ 	/* common variables */
+-	unsigned short type = 0;	/* used by EDEBUG */
+ 	/* variables for 3C595 */
+ 	short status, cst;
+ 	register short rx_fifo;
+@@ -262,6 +260,8 @@
+ 	if (rx_fifo==0)
+ 		return 0;
+ 
++	if ( ! retrieve ) return 1;
++
+ 		/* read packet */
+ #ifdef EDEBUG
+ 	printf("[l=%d",rx_fifo);
+@@ -300,12 +300,15 @@
+ 	outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+ 	while (inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS);
+ #ifdef EDEBUG
++{
++	unsigned short type = 0;	/* used by EDEBUG */
+ 	type = (nic->packet[12]<<8) | nic->packet[13];
+ 	if(nic->packet[0]+nic->packet[1]+nic->packet[2]+nic->packet[3]+nic->packet[4]+
+ 	    nic->packet[5] == 0xFF*ETH_ALEN)
+ 		printf(",t=%hX,b]",type);
+ 	else
+ 		printf(",t=%hX]",type);
++}
+ #endif
+ 	return 1;
+ }
+@@ -382,9 +385,8 @@
+ static void            
+ vxsetlink(void)
+ {       
+-    int i, j, k;
++    int i, j;
+     char *reason, *warning;
+-    static short prev_flags;
+     static char prev_conn = -1;
+ 
+     if (prev_conn == -1) {
+@@ -438,28 +440,47 @@
+     GO_WINDOW(1); 
+ }
+ 
+-static void t595_disable(struct nic *nic)
++static void t595_disable(struct dev *dev)
+ {
+-    outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+-    udelay(8000);
+-    GO_WINDOW(4);
+-    outw(0, BASE + VX_W4_MEDIA_TYPE);
+-    GO_WINDOW(1);
++	struct nic *nic = (struct nic *)dev;
++	t595_reset(nic);
++
++	outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
++	udelay(8000);
++	GO_WINDOW(4);
++	outw(0, BASE + VX_W4_MEDIA_TYPE);
++	GO_WINDOW(1);
++}
++
++static void t595_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
+ }
+ 
+ /**************************************************************************
+ ETH_PROBE - Look for an adapter
+ ***************************************************************************/
+-struct nic *t595_probe(struct nic *nic, unsigned short *probeaddrs, struct pci_device *pci)
++static int t595_probe(struct dev *dev, struct pci_device *pci)
+ {
++	struct nic *nic = (struct nic *)dev;
+ 	int i;
+ 	unsigned short *p;
+ 
+-	if (probeaddrs == 0 || probeaddrs[0] == 0)
++	if (pci->ioaddr == 0)
+ 		return 0;
+ /*	eth_nic_base = probeaddrs[0] & ~3; */
+ 	eth_nic_base = pci->ioaddr;
+ 
++	nic->irqno  = 0;
++	nic->ioaddr = pci->ioaddr & ~3;
++
+ 	GO_WINDOW(0);
+ 	outw(GLOBAL_RESET, BASE + VX_COMMAND);
+ 	VX_BUSY_WAIT;
+@@ -487,14 +508,40 @@
+ 	printf("Ethernet address: %!\n", nic->node_addr);
+ 
+ 	t595_reset(nic);
+-	nic->reset = t595_reset;
+-	nic->poll = t595_poll;
++	dev->disable  = t595_disable;
++	nic->poll     = t595_poll;
+ 	nic->transmit = t595_transmit;
+-	nic->disable = t595_disable;
+-	return nic;
++	nic->irq      = t595_irq;
++	return 1;
+ 
+ }
+ 
++static struct pci_id t595_nics[] = {
++PCI_ROM(0x10b7, 0x5900, "3c590",           "3Com590"),		/* Vortex 10Mbps */
++PCI_ROM(0x10b7, 0x5950, "3c595",           "3Com595"),		/* Vortex 100baseTx */
++PCI_ROM(0x10b7, 0x5951, "3c595-1",         "3Com595"),		/* Vortex 100baseT4 */
++PCI_ROM(0x10b7, 0x5952, "3c595-2",         "3Com595"),		/* Vortex 100base-MII */
++PCI_ROM(0x10b7, 0x9000, "3c900-tpo",       "3Com900-TPO"),	/* 10 Base TPO */
++PCI_ROM(0x10b7, 0x9001, "3c900-t4",        "3Com900-Combo"),	/* 10/100 T4 */
++PCI_ROM(0x10b7, 0x9004, "3c900b-tpo",      "3Com900B-TPO"),	/* 10 Base TPO */
++PCI_ROM(0x10b7, 0x9005, "3c900b-combo",    "3Com900B-Combo"),	/* 10 Base Combo */
++PCI_ROM(0x10b7, 0x9006, "3c900b-tpb2",     "3Com900B-2/T"),	/* 10 Base TP and Base2 */
++PCI_ROM(0x10b7, 0x900a, "3c900b-fl",       "3Com900B-FL"),	/* 10 Base F */
++PCI_ROM(0x10b7, 0x9800, "3c980-cyclone-1", "3Com980-Cyclone"),	/* Cyclone */
++PCI_ROM(0x10b7, 0x9805, "3c9805-1",        "3Com9805"),		/* Dual Port Server Cyclone */
++PCI_ROM(0x10b7, 0x7646, "3csoho100-tx-1",  "3CSOHO100-TX"),	/* Hurricane */
++PCI_ROM(0x10b7, 0x4500, "3c450-1",         "3Com450 HomePNA Tornado"),
++};
++
++struct pci_driver t595_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "3C595",
++	.probe    = t595_probe,
++	.ids      = t595_nics,
++	.id_count = sizeof(t595_nics)/sizeof(t595_nics[0]),
++	.class    = 0,
++};
++
+ /*
+  * Local variables:
+  *  c-basic-offset: 8
+diff -Naur grub-0.97.orig/netboot/3c90x.c grub-0.97/netboot/3c90x.c
+--- grub-0.97.orig/netboot/3c90x.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/3c90x.c	2005-08-31 19:03:35.000000000 +0000
+@@ -1,7 +1,7 @@
+ /*
+  * 3c90x.c -- This file implements the 3c90x driver for etherboot.  Written
+  * by Greg Beeley, Greg.Beeley@LightSys.org.  Modified by Steve Smith,
+- * Steve.Smith@Juno.Com
++ * Steve.Smith@Juno.Com. Alignment bug fix Neil Newell (nn@icenoir.net).
+  *
+  * This program Copyright (C) 1999 LightSys Technology Services, Inc.
+  * Portions Copyright (C) 1999 Steve Smith
+@@ -31,13 +31,15 @@
+  *					Re-wrote poll and transmit for
+  *					better error recovery and heavy
+  *					network traffic operation
++ * v2.01    5-26-2003 NN Fixed driver alignment issue which
++ *                  caused system lockups if driver structures
++ *                  not 8-byte aligned.
+  *
+  */
+ 
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ #include "timer.h"
+ 
+ #define	XCVR_MAGIC	(0x5A00)
+@@ -47,9 +49,6 @@
+  **/
+ #define	XMIT_RETRIES	250
+ 
+-#undef	virt_to_bus
+-#define	virt_to_bus(x)	((unsigned long)x)
+-
+ /*** Register definitions for the 3c905 ***/
+ enum Registers
+     {
+@@ -225,7 +224,7 @@
+     unsigned int	DataAddr;
+     unsigned int	DataLength;
+     }
+-    TXD;
++    TXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */
+ 
+ /*** RX descriptor ***/
+ typedef struct
+@@ -235,7 +234,7 @@
+     unsigned int	DataAddr;
+     unsigned int	DataLength;
+     }
+-    RXD;
++    RXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */
+ 
+ /*** Global variables ***/
+ static struct
+@@ -311,6 +310,7 @@
+     }
+ 
+ 
++#if 0
+ /*** a3c90x_internal_WriteEepromWord - write a physical word of
+  *** data to the onboard serial eeprom (not the BIOS prom, but the
+  *** nvram in the card that stores, among other things, the MAC
+@@ -344,8 +344,9 @@
+ 
+     return 0;
+     }
++#endif
+ 
+-
++#if 0
+ /*** a3c90x_internal_WriteEeprom - write data to the serial eeprom,
+  *** and re-compute the eeprom checksum.
+  ***/
+@@ -384,8 +385,7 @@
+ 
+     return 0;
+     }
+-
+-
++#endif
+ 
+ /*** a3c90x_reset: exported function that resets the card to its default
+  *** state.  This is so the Linux driver can re-set the card up the way
+@@ -393,12 +393,10 @@
+  *** not alter the selected transceiver that we used to download the boot
+  *** image.
+  ***/
+-static void
+-a3c90x_reset(struct nic *nic)
++static void a3c90x_reset(void)
+     {
+-    int cfg;
+-
+ #ifdef	CFG_3C90X_PRESERVE_XCVR
++    int cfg;
+     /** Read the current InternalConfig value. **/
+     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3);
+     cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l);
+@@ -473,7 +471,7 @@
+  *** p - the pointer to the packet data itself.
+  ***/
+ static void
+-a3c90x_transmit(struct nic *nic, const char *d, unsigned int t,
++a3c90x_transmit(struct nic *nic __unused, const char *d, unsigned int t,
+                 unsigned int s, const char *p)
+     {
+ 
+@@ -553,7 +551,7 @@
+ 	if (status & 0x02)
+ 	    {
+ 	    printf("3C90X: Tx Reclaim Error (%hhX)\n", status);
+-	    a3c90x_reset(NULL);
++	    a3c90x_reset();
+ 	    }
+ 	else if (status & 0x04)
+ 	    {
+@@ -572,18 +570,18 @@
+ 	else if (status & 0x10)
+ 	    {
+ 	    printf("3C90X: Tx Underrun (%hhX)\n", status);
+-	    a3c90x_reset(NULL);
++	    a3c90x_reset();
+ 	    }
+ 	else if (status & 0x20)
+ 	    {
+ 	    printf("3C90X: Tx Jabber (%hhX)\n", status);
+-	    a3c90x_reset(NULL);
++	    a3c90x_reset();
+ 	    }
+ 	else if ((status & 0x80) != 0x80)
+ 	    {
+ 	    printf("3C90X: Internal Error - Incomplete Transmission (%hhX)\n",
+ 	           status);
+-	    a3c90x_reset(NULL);
++	    a3c90x_reset();
+ 	    }
+ 	}
+ 
+@@ -601,7 +599,7 @@
+  *** in nic->packetlen.  Return 1 if a packet was found.
+  ***/
+ static int
+-a3c90x_poll(struct nic *nic)
++a3c90x_poll(struct nic *nic, int retrieve)
+     {
+     int i, errcode;
+ 
+@@ -610,6 +608,8 @@
+ 	return 0;
+ 	}
+ 
++    if ( ! retrieve ) return 1;
++
+     /** we don't need to acknowledge rxComplete -- the upload engine
+      ** does it for us.
+      **/
+@@ -663,34 +663,51 @@
+  *** [Ken]
+  ***/
+ static void
+-a3c90x_disable(struct nic *nic)
+-    {
++a3c90x_disable(struct dev *dev __unused)
++{
++	/* reset and disable merge */
++	a3c90x_reset();
+ 	/* Disable the receiver and transmitter. */
+ 	outw(cmdRxDisable, INF_3C90X.IOAddr + regCommandIntStatus_w);
+ 	outw(cmdTxDisable, INF_3C90X.IOAddr + regCommandIntStatus_w);
+-    }
+-
++}
+ 
++static void a3c90x_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
+ 
+ /*** a3c90x_probe: exported routine to probe for the 3c905 card and perform
+  *** initialization.  If this routine is called, the pci functions did find the
+  *** card.  We just have to init it here.
+  ***/
+-struct nic*
+-a3c90x_probe(struct nic *nic, unsigned short *probeaddrs, struct pci_device *pci)
+-    {
++static int a3c90x_probe(struct dev *dev, struct pci_device *pci)
++{
++    struct nic *nic = (struct nic *)dev;
+     int i, c;
+     unsigned short eeprom[0x21];
+     unsigned int cfg;
+     unsigned int mopt;
++    unsigned int mstat;
+     unsigned short linktype;
++#define	HWADDR_OFFSET	10
+ 
+-    if (probeaddrs == 0 || probeaddrs[0] == 0)
++    if (pci->ioaddr == 0)
+           return 0;
+ 
+     adjust_pci_device(pci);
+ 
+-    INF_3C90X.IOAddr = probeaddrs[0] & ~3;
++    nic->ioaddr = pci->ioaddr & ~3;
++    nic->irqno = 0;
++
++    INF_3C90X.IOAddr = pci->ioaddr & ~3;
+     INF_3C90X.CurrentWindow = 255;
+     switch (a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, 0x03))
+ 	{
+@@ -756,30 +773,45 @@
+            "Copyright 1999 LightSys Technology Services, Inc.\n"
+            "Portions Copyright 1999 Steve Smith\n");
+     printf("Provided with ABSOLUTELY NO WARRANTY.\n");
++#ifdef	CFG_3C90X_BOOTROM_FIX
++    if (INF_3C90X.isBrev)
++        {
++        printf("NOTE: 3c905b bootrom fix enabled; has side "
++	   "effects.  See 3c90x.txt for info.\n");
++	}
++#endif
+     printf("-------------------------------------------------------"
+            "------------------------\n");
+ 
+     /** Retrieve the Hardware address and print it on the screen. **/
+-    INF_3C90X.HWAddr[0] = eeprom[0]>>8;
+-    INF_3C90X.HWAddr[1] = eeprom[0]&0xFF;
+-    INF_3C90X.HWAddr[2] = eeprom[1]>>8;
+-    INF_3C90X.HWAddr[3] = eeprom[1]&0xFF;
+-    INF_3C90X.HWAddr[4] = eeprom[2]>>8;
+-    INF_3C90X.HWAddr[5] = eeprom[2]&0xFF;
++    INF_3C90X.HWAddr[0] = eeprom[HWADDR_OFFSET + 0]>>8;
++    INF_3C90X.HWAddr[1] = eeprom[HWADDR_OFFSET + 0]&0xFF;
++    INF_3C90X.HWAddr[2] = eeprom[HWADDR_OFFSET + 1]>>8;
++    INF_3C90X.HWAddr[3] = eeprom[HWADDR_OFFSET + 1]&0xFF;
++    INF_3C90X.HWAddr[4] = eeprom[HWADDR_OFFSET + 2]>>8;
++    INF_3C90X.HWAddr[5] = eeprom[HWADDR_OFFSET + 2]&0xFF;
+     printf("MAC Address = %!\n", INF_3C90X.HWAddr);
+ 
++    /* Test if the link is good, if not continue */
++    a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winDiagnostics4);
++    mstat = inw(INF_3C90X.IOAddr + regMediaStatus_4_w);
++    if((mstat & (1<<11)) == 0) {
++	printf("Valid link not established\n");
++	return 0;
++    }
++
+     /** Program the MAC address into the station address registers **/
+     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2);
+-    outw(htons(eeprom[0]), INF_3C90X.IOAddr + regStationAddress_2_3w);
+-    outw(htons(eeprom[1]), INF_3C90X.IOAddr + regStationAddress_2_3w+2);
+-    outw(htons(eeprom[2]), INF_3C90X.IOAddr + regStationAddress_2_3w+4);
++    outw(htons(eeprom[HWADDR_OFFSET + 0]), INF_3C90X.IOAddr + regStationAddress_2_3w);
++    outw(htons(eeprom[HWADDR_OFFSET + 1]), INF_3C90X.IOAddr + regStationAddress_2_3w+2);
++    outw(htons(eeprom[HWADDR_OFFSET + 2]), INF_3C90X.IOAddr + regStationAddress_2_3w+4);
+     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+0);
+     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2);
+     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4);
+ 
+     /** Fill in our entry in the etherboot arp table **/
+     for(i=0;i<ETH_ALEN;i++)
+-	nic->node_addr[i] = (eeprom[i/2] >> (8*((i&1)^1))) & 0xff;
++	nic->node_addr[i] = (eeprom[HWADDR_OFFSET + i/2] >> (8*((i&1)^1))) & 0xff;
+ 
+     /** Read the media options register, print a message and set default
+      ** xcvr.
+@@ -903,8 +935,8 @@
+     while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS)
+ 	;
+ 
+-    /** Set the RX filter = receive only individual pkts & bcast. **/
+-    a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x04);
++    /** Set the RX filter = receive only individual pkts & multicast & bcast. **/
++    a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04);
+     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0);
+ 
+ 
+@@ -918,12 +950,46 @@
+                                  cmdAcknowledgeInterrupt, 0x661);
+ 
+     /** Set our exported functions **/
+-    nic->reset    = a3c90x_reset;
++    dev->disable  = a3c90x_disable;
+     nic->poll     = a3c90x_poll;
+     nic->transmit = a3c90x_transmit;
+-    nic->disable  = a3c90x_disable;
++    nic->irq      = a3c90x_irq;
+ 
+-    return nic;
+-    }
++    return 1;
++}
+ 
+ 
++static struct pci_id a3c90x_nics[] = {
++/* Original 90x revisions: */
++PCI_ROM(0x10b7, 0x9000, "3c905-tpo",     "3Com900-TPO"),	/* 10 Base TPO */
++PCI_ROM(0x10b7, 0x9001, "3c905-t4",      "3Com900-Combo"),	/* 10/100 T4 */
++PCI_ROM(0x10b7, 0x9050, "3c905-tpo100",  "3Com905-TX"),		/* 100 Base TX / 10/100 TPO */
++PCI_ROM(0x10b7, 0x9051, "3c905-combo",   "3Com905-T4"),		/* 100 Base T4 / 10 Base Combo */
++/* Newer 90xB revisions: */
++PCI_ROM(0x10b7, 0x9004, "3c905b-tpo",    "3Com900B-TPO"),	/* 10 Base TPO */
++PCI_ROM(0x10b7, 0x9005, "3c905b-combo",  "3Com900B-Combo"),	/* 10 Base Combo */
++PCI_ROM(0x10b7, 0x9006, "3c905b-tpb2",   "3Com900B-2/T"),	/* 10 Base TP and Base2 */
++PCI_ROM(0x10b7, 0x900a, "3c905b-fl",     "3Com900B-FL"),	/* 10 Base FL */
++PCI_ROM(0x10b7, 0x9055, "3c905b-tpo100", "3Com905B-TX"),	/* 10/100 TPO */
++PCI_ROM(0x10b7, 0x9056, "3c905b-t4",     "3Com905B-T4"),	/* 10/100 T4 */
++PCI_ROM(0x10b7, 0x9058, "3c905b-9058",   "3Com905B-9058"),	/* Cyclone 10/100/BNC */
++PCI_ROM(0x10b7, 0x905a, "3c905b-fx",     "3Com905B-FL"),	/* 100 Base FX / 10 Base FX */
++/* Newer 90xC revision: */
++PCI_ROM(0x10b7, 0x9200, "3c905c-tpo",    "3Com905C-TXM"),	/* 10/100 TPO (3C905C-TXM) */
++PCI_ROM(0x10b7, 0x9210, "3c920b-emb-wnm","3Com20B-EMB WNM"),
++PCI_ROM(0x10b7, 0x9800, "3c980",         "3Com980-Cyclone"),	/* Cyclone */
++PCI_ROM(0x10b7, 0x9805, "3c9805",        "3Com9805"),		/* Dual Port Server Cyclone */
++PCI_ROM(0x10b7, 0x7646, "3csoho100-tx",  "3CSOHO100-TX"),	/* Hurricane */
++PCI_ROM(0x10b7, 0x4500, "3c450",         "3Com450 HomePNA Tornado"),
++PCI_ROM(0x10b7, 0x1201, "3c982a",        "3Com982A"),
++PCI_ROM(0x10b7, 0x1202, "3c982b",        "3Com982B"),
++};
++
++struct pci_driver a3c90x_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "3C90X",
++	.probe    = a3c90x_probe,
++	.ids      = a3c90x_nics,
++	.id_count = sizeof(a3c90x_nics)/sizeof(a3c90x_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/3c90x.txt grub-0.97/netboot/3c90x.txt
+--- grub-0.97.orig/netboot/3c90x.txt	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/3c90x.txt	1970-01-01 00:00:00.000000000 +0000
+@@ -1,307 +0,0 @@
+-
+-	Instructions for use of the 3C90X driver for EtherBoot
+-
+-		Original 3C905B support by:
+-			Greg Beeley (Greg.Beeley@LightSys.org),
+-			LightSys Technology Services, Inc.
+-			February 11, 1999
+-
+-		Updates for 3C90X family by:
+-			Steve Smith (steve.smith@juno.com)
+-			October 1, 1999
+-
+-		Minor documentation updates by
+-			Greg Beeley (Greg.Beeley@LightSys.org)
+-			March 29, 2000
+-
+--------------------------------------------------------------------------------
+-
+-I   OVERVIEW
+-
+-    The 3c90X series ethernet cards are a group of high-performance busmaster
+-    DMA cards from 3Com.  This particular driver supports both the 3c90x and
+-    the 3c90xB revision cards.  3C90xC family support has been tested to some
+-    degree but not extensively.
+-
+-    Here's the licensing information:
+-
+-    This program Copyright (C) 1999 LightSys Technology Services, Inc.
+-    Portions Copyright (C) 1999 Steve Smith.
+-
+-    This program may be re-distributed in source or binary form, modified,
+-    sold, or copied for any purpose, provided that the above copyright message
+-    and this text are included with all source copies or derivative works, and
+-    provided that the above copyright message and this text are included in the
+-    documentation of any binary-only distributions.  This program is
+-    distributed WITHOUT ANY WARRANTY, without even the warranty of FITNESS FOR
+-    A PARTICULAR PURPOSE or MERCHANTABILITY.  Please read the associated
+-    documentation "3c90x.txt" before compiling and using this driver.
+-
+-
+-II  FLASH PROMS
+-
+-    The 3c90xB cards, according to the 3Com documentation, only accept the
+-    following flash memory chips:
+-
+-	Atmel AT29C512 (64 kilobyte)
+-	Atmel AT29C010 (128 kilobyte)
+-
+-    The 3c90x cards, according to the 3Com documentation, accept the
+-    following flash memory chips capacities:
+-
+-	64  kb (8 kB)
+-	128 kb (16 kB)
+-	256 kb (32 kB) and
+-	512 kb (64 kB)
+-
+-    Atmel AT29C512 (64 kilobyte) chips are specifically listed for both
+-    adapters, but flashing on the 3c905b cards would only be supported
+-    through the Atmel parts.  Any device, of the supported size, should
+-    be supported when programmed by a dedicated PROM programmer (e.g.
+-    not the card).
+-
+-    To use this driver in such a PROM, visit Atmel's web site and download
+-    their .PDF file containing a list of their distributors.  Contact the
+-    distributors for pricing information.  The prices are quite reasonable
+-    (about $3 US each for the 64 kB part), and are comparable to what one would
+-    expect for similarly sized standard EPROMs.  And, the flash chips are much
+-    easier to work with, as they don't need to be UV-erased to be reprogrammed.
+-    The 3C905B card actually provides a method to program the flash memory
+-    while it is resident on board the card itself; if someone would like to
+-    write a small DOS program to do the programming, I can provide the
+-    information about the registers and so forth.
+-
+-    A utility program, 3c90xutil, is provided with Etherboot in the 'contrib'
+-    directory that allows for the on-board flashing of the ROM while Linux
+-    is running.  The program has been successfully used under Linux, but I
+-    have heard problem reports of its use under FreeBSD.  Anyone willing to
+-    make it work under FreeBSD is more than welcome to do so!
+-
+-    You also have the option of using EPROM chips - the 3C905B-TX-NM has been
+-    successfully tested with 27C256 (32kB) and 27C512 (64kB) chips with a
+-    specified access time of 100ns and faster.
+-
+-
+-III GENERAL USE
+-
+-    Normally, the basic procedure for using this driver is as follows:
+-
+-	1.  Run the 3c90xcfg program on the driver diskette to enable the
+-	boot PROM and set it to 64k or 128k, as appropriate.
+-	2.  Build the appropriate 3c90x.fd0 or 3c90x.fd0 floppy image with
+-	possibly the value CFG_3C90X_XCVR defined to the transceiver type that
+-	you want to use (i.e., 10/100 rj45, AUI, coax, MII).
+-	3.  Run the floppy image on the PC to be network booted, to get
+-	it configured, and to verify that it will boot properly.
+-	4.  Build the 3c90x.rom or 3c90x.lzrom PROM image and program
+-	it into the flash or EPROM memory chip.
+-	5.  Put the PROM in the ethernet card, boot and enable 'boot from
+-	network first' in the system BIOS, save and reboot.
+-
+-    Here are some issues to be aware of:
+-
+-	1.  If you experience crashes or different behaviour when using the
+-	boot PROM, add the setting CFG_3C90X_BOOTROM_FIX and go through the
+-	steps 2-5 above.  This works around a bug in some 3c905B cards (see
+-	below), but has some side-effects which may not be desirable.
+-        Please note that you have to boot off a floppy (not PROM!) once for
+-        this fix to take effect.
+-	2.  The possible need to manually set the CFG_3C90X_XCVR value to
+-	configure the transceiver type.  Values are listed below.
+-	3.  The possible need to define CFG_3C90X_PRESERVE_XCVR for use in
+-	operating systems that don't intelligently determine the
+-	transceiver type.
+-
+-    Some things that are on the 'To-Do' list, perhaps for me, but perhaps
+-    for any other volunteers out there:
+-
+-	1.  Extend the driver to fully implement the auto-select
+-	algorithm if the card has multiple media ports.
+-	2.  Fix any bugs in the code <grin>....
+-	3.  Extend the driver to support the 3c905c revision cards
+-	"officially".  Right now, the support has been primarily empirical
+-	and not based on 3c905C documentation.
+-
+-    Now for the details....
+-
+-    This driver has been tested on roughly 300 systems.  The main two
+-    configuration issues to contend with are:
+-
+-	1.  Ensure that PCI Busmastering is enabled for the adapter (configured
+-	in the CMOS setup)
+-	2.  Some systems don't work properly with the adapter when plug and
+-	play OS is enabled; I always set it to "No" or "Disabled" -- this makes
+-	it easier and really doesn't adversely affect anything.
+-
+-    Roughly 95% of the systems worked when configured properly.  A few
+-    have issues with booting locally once the boot PROM has been installed
+-    (this number has been less than 2%).  Other configuration issues that
+-    to check:
+-
+-	1.  Newer BIOS's actually work correctly with the network boot order.
+-	Set the network adapter first.  Most older BIOS's automatically go to
+-	the network boot PROM first.
+-	2.  For systems where the adapter was already installed and is just
+-	having the PROM installed, try setting the "reset configuration data"
+-	to yes in the CMOS setup if the BIOS isn't seen at first.  If your BIOS
+-	doesn't have this option, remove the card, start the system, shut down,
+-	install the card and restart (or switch to a different PCI slot).
+-	3.  Make sure the CMOS security settings aren't preventing a boot.
+-
+-    The 3c905B cards have a significant 'bug' that relates to the flash prom:
+-    unless the card is set internally to the MII transceiver, it will only
+-    read the first 8k of the PROM image.  Don't ask why -- it seems really
+-    obscure, but it has to do with the way they mux'd the address lines
+-    from the PCI bus to the ROM.  Unfortunately, most of us are not using
+-    MII transceivers, and even the .lzrom image ends up being just a little
+-    bit larger than 8k.  Note that the workaround for this is disabled by
+-    default, because the Windows NT 4.0 driver does not like it (no packets
+-    are transmitted).
+-
+-    So, the solution that I've used is to internally set the card's nvram
+-    configuration to use MII when it boots.  The 3c905b driver does this
+-    automatically.  This way, the 16k prom image can be loaded into memory,
+-    and then the 3c905b driver can set the temporary configuration of the
+-    card to an appropriate value, either configurable by the user or chosen
+-    by the driver.
+-
+-    To enable the 3c905B bugfix, which is necessary for these cards when 
+-    booting from the Flash ROM, define -DCFG_3C90X_BOOTROM_FIX when building,
+-    create a floppy image and boot it once.
+-    Thereafter, the card should accept the larger prom image.
+-
+-    The driver should choose an appropriate transceiver on the card.  However,
+-    if it doesn't on your card or if you need to, for instance, set your
+-    card to 10mbps when connected to an unmanaged 10/100 hub, you can specify
+-    which transceiver you want to use.  To do this, build the 3c905b.fd0
+-    image with -DCFG_3C90X_XCVR=x, where 'x' is one of the following
+-    values:
+-
+-	0	10Base-T
+-	1	10mbps AUI
+-	3	10Base-2 (thinnet/coax)
+-	4	100Base-TX
+-	5	100Base-FX
+-	6	MII
+-	8	Auto-negotiation 10Base-T / 100Base-TX (usually the default)
+-	9	MII External MAC Mode
+-	255	Allow driver to choose an 'appropriate' media port.
+-
+-    Then proceed from step 2 in the above 'general use' instructions.  The
+-    .rom image can be built with CFG_3C90X_XCVR set to a value, but you
+-    normally don't want to do this, since it is easier to change the
+-    transceiver type by rebuilding a new floppy, changing the BIOS to floppy
+-    boot, booting, and then changing the BIOS back to network boot.  If
+-    CFG_3C90X_XCVR is not set in a particular build, it just uses the
+-    current configuration (either its 'best guess' or whatever the stored
+-    CFG_3C90X_XCVR value was from the last time it was set).
+-
+-    [[ Note for the more technically inclined:  The CFG_3C90X_XCVR value is
+-    programmed into a register in the card's NVRAM that was reserved for
+-    LanWorks PROM images to use.  When the driver boots, the card comes
+-    up in MII mode, and the driver checks the LanWorks register to find
+-    out if the user specified a transceiver type.  If it finds that
+-    information, it uses that, otherwise it picks a transceiver that the
+-    card has based on the 3c905b's MediaOptions register.  This driver isn't
+-    quite smart enough to always determine which media port is actually
+-    _connected_; maybe someone else would like to take on that task (it
+-    actually involves sending a self-directed packet and seeing if it
+-    comes back.  IF it does, that port is connected). ]]
+-
+-    Another issue to keep in mind is that it is possible that some OS'es
+-    might not be happy with the way I've handled the PROM-image hack with
+-    setting MII mode on bootup.  Linux 2.0.35 does not have this problem.
+-    Behavior of other systems may vary.  The 3com documentation specifically
+-    says that, at least with the card that I have, the device driver in the
+-    OS should auto-select the media port, so other drivers should work fine
+-    with this 'hack'.  However, if yours doesn't seem to, you can try defining
+-    CFG_3C90X_PRESERVE_XCVR when building to cause Etherboot to keep the
+-    working setting (that allowed the bootp/tftp process) across the eth_reset
+-    operation.
+-
+-
+-IV  FOR DEVELOPERS....
+-
+-    If you would like to fix/extend/etc. this driver, feel free to do so; just
+-    be sure you can test the modified version on the 3c905B-TX cards that the
+-    driver was originally designed for.  This section of this document gives
+-    some information that might be relevant to a programmer.
+-
+-    A.  Main Entry Point
+-
+-	a3c90x_probe is the main entry point for this driver.  It is referred
+-	to in an array in 'config.c'.
+-
+-    B.  Other Important Functions
+-
+-	The functions a3c90x_transmit, a3c90x_poll, a3c90x_reset, and
+-	a3c90x_disable are static functions that EtherBoot finds out about
+-	as a  result of a3c90x_probe setting entries in the nic structure
+-	for them.  The EtherBoot framework does not use interrupts.  It is
+-	polled.  All transmit and receive operations are initiated by the
+-	etherboot framework, not by an interrupt or by the driver.
+-
+-    C.  Internal Functions
+-
+-	The following functions are internal to the driver:
+-
+-	a3c90x_internal_IssueCommand - sends a command to the 3c905b card.
+-	a3c90x_internal_SetWindow - shifts between one of eight register
+-	windows onboard the 3c90x.  The bottom 16 bytes of the card's
+-	I/O space are multiplexed among 128 bytes, only 16 of which are
+-	visible at any one time.  This SetWindow function selects one of
+-	the eight sets.
+-	a3c90x_internal_ReadEeprom - reads a word (16 bits) from the
+-	card's onboard nvram.  This is NOT the BIOS boot rom.  This is
+-	where the card stores such things as its hardware address.
+-	a3c90x_internal_WriteEeprom - writes a word (16 bits) to the
+-	card's nvram, and recomputes the eeprom checksum.
+-	a3c90x_internal_WriteEepromWord - writes a word (16 bits) to the
+-	card's nvram.  Used by the above routine.
+-	a3c90x_internal_WriteEepromWord - writes a word (16 bits) to the
+-	card's nvram.  Used by the above routine.
+-
+-    D.  Globals
+-
+-	All global variables are inside a global structure named INF_3C90X.
+-	So, wherever you see that structure referenced, you know the variable
+-	is a global.  Just keeps things a little neater.
+-
+-    E.  Enumerations
+-
+-	There are quite a few enumerated type definitions for registers and
+-	so forth, many for registers that I didn't even touch in the driver.
+-	Register types start with 'reg', window numbers (for SetWindow)
+-	start with 'win', and commands (for IssueCommand) start with 'cmd'.
+-	Register offsets also include an indication in the name as to the
+-	size of the register (_b = byte, _w = word, _l = long), and which
+-	window the register is in, if it is windowed (0-7).
+-
+-    F.  Why the 'a3c90x' name?
+-
+-	I had to come up with a letter at the beginning of all of the
+-	identifiers, since 3com so conveniently had their name start with a
+-	number.  Another driver used 't' (for 'three'?); I chose 'a' for
+-	no reason at all.
+-
+-Addendum by Jorge L. deLyra <delyra@latt.if.usp.br>, 22Nov2000 re
+-working around the 3C905 hardware bug mentioned above:
+-
+-Use this floppy to fix any 3COM model 3C905B PCI 10/100 Ethernet cards
+-that fail to load and run the boot program the first time around. If
+-they have a "Lucent" rather than a "Broadcom" chipset these cards have
+-a configuration bug that causes a hang when trying to load the boot
+-program from the PROM, if you try to use them right out of the box.
+-
+-The boot program in this floppy is the file named 3c905b-tpo100.rom
+-from Etherboot version 4.6.10, compiled with the bugfix parameter
+-
+-			CFG_3C90X_BOOTROM_FIX
+-
+-You have to take the chip off the card and boot the system once using
+-this floppy. Once loaded from the floppy, the boot program will access
+-the card and change some setting in it, correcting the problem. After
+-that you may use either this boot program or the normal one, compiled
+-without this bugfix parameter, to boot the machine from the PROM chip.
+-
+-[Any recent Etherboot version should do, not just 4.6.10 - Ed.]
+diff -Naur grub-0.97.orig/netboot/Makefile.am grub-0.97/netboot/Makefile.am
+--- grub-0.97.orig/netboot/Makefile.am	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/Makefile.am	2005-08-31 19:03:35.000000000 +0000
+@@ -10,58 +10,72 @@
+ 
+ noinst_LIBRARIES = $(LIBDRIVERS)
+ 
+-libdrivers_a_SOURCES = cards.h config.c etherboot.h \
+-	fsys_tftp.c linux-asm-io.h linux-asm-string.h \
+-	main.c misc.c nic.h osdep.h pci.c pci.h timer.c timer.h
+-EXTRA_libdrivers_a_SOURCES = 3c509.c 3c509.h 3c595.c 3c595.h 3c90x.c \
+-	cs89x0.c cs89x0.h davicom.c depca.c eepro.c eepro100.c \
+-	epic100.c epic100.h fa311.c i82586.c lance.c natsemi.c \
+-	ni5010.c ns8390.c ns8390.h otulip.c otulip.h rtl8139.c \
+-	sis900.c sis900.h sk_g16.c sk_g16.h smc9000.c smc9000.h \
+-	tiara.c tlan.c tulip.c via-rhine.c w89c840.c
++libdrivers_a_SOURCES = big_bswap.h bootp.h byteswap.h config.c cpu.h \
++	dev.h elf.h endian.h etherboot.h fsys_tftp.c grub.h \
++	i386_byteswap.h i386_elf.h i386_endian.h i386_timer.c \
++	if_arp.h if_ether.h igmp.h in.h io.h ip.h isa.h latch.h \
++	little_bswap.h misc.c nic.c nic.h osdep.h pci.c pci.h \
++	pci_ids.h pci_io.c stdint.h tftp.h timer.c timer.h \
++	types.h udp.h mii.h pic8259.c pic8259.h pxe.h basemem.c segoff.h
++EXTRA_libdrivers_a_SOURCES = 3c595.c 3c595.h 3c90x.c davicom.c \
++	e1000.c e1000_hw.h eepro100.c epic100.c epic100.h natsemi.c \
++	ns8390.c ns8390.h pcnet32.c rtl8139.c sis900.c sis900.h \
++	sundance.c tg3.c tg3.h tlan.c tlan.h tulip.c via-rhine.c \
++	w89c840.c r8169.c forcedeth.c ns83820.c pnic.c pnic_api.c \
++	undi.c undi.h
+ libdrivers_a_CFLAGS = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	-DFSYS_TFTP=1 $(NET_CFLAGS) $(NET_EXTRAFLAGS)
+ # Filled by configure.
+ libdrivers_a_LIBADD = @NETBOOT_DRIVERS@
+ libdrivers_a_DEPENDENCIES = $(libdrivers_a_LIBADD)
+ 
+-EXTRA_DIST = README.netboot 3c90x.txt cs89x0.txt sis900.txt tulip.txt
++EXTRA_DIST = README.netboot
+ 
+ # These below are several special rules for the device drivers.
+ # We cannot use a simple rule for them...
+ 
+ # What objects are derived from a driver?
+-3c509_drivers = 3c509.o 3c529.o
++#3c509_drivers = 3c509.o 3c529.o
+ 3c595_drivers = 3c595.o
+ 3c90x_drivers = 3c90x.o
+-cs89x0_drivers = cs89x0.o
++#cs89x0_drivers = cs89x0.o
+ davicom_drivers = davicom.o
+-depca_drivers = depca.o
+-eepro_drivers = eepro.o
++#depca_drivers = depca.o
++#eepro_drivers = eepro.o
++e1000_drivers = e1000.o
+ eepro100_drivers = eepro100.o
+ epic100_drivers = epic100.o
+ #fa311_drivers = fa311.o
+-i82586_drivers = 3c507.o exos205.o ni5210.o
+-lance_drivers = lance.o ne2100.o ni6510.o
++forcedeth_drivers = forcedeth.o
++#i82586_drivers = 3c507.o exos205.o ni5210.o
++#lance_drivers = lance.o ne2100.o ni6510.o
+ natsemi_drivers = natsemi.o
+-ni5010_drivers = ni5010.o
++#ni5010_drivers = ni5010.o
++ns83820_drivers = ns83820.o
+ ns8390_drivers = 3c503.o ne.o ns8390.o wd.o
+-otulip_drivers = otulip.o
++#otulip_drivers = otulip.o
++pcnet32_drivers = pcnet32.o
++pnic_drivers = pnic.o
++r8169_drivers = r8169.o
+ rtl8139_drivers = rtl8139.o
+ sis900_drivers = sis900.o
+-sk_g16_drivers = sk_g16.o
+-smc9000_drivers = smc9000.o
+-tiara_drivers = tiara.o
+-#tlan_drivers = tlan.o
++#sk_g16_drivers = sk_g16.o
++sundance_driver = sundance.o
++#smc9000_drivers = smc9000.o
++tg3_drivers = tg3.o
++#tiara_drivers = tiara.o
++tlan_drivers = tlan.o
+ tulip_drivers = tulip.o
++undi_drivers = undi.o
+ via_rhine_drivers = via_rhine.o
+ w89c840_drivers = w89c840.o
+ 
++
+ # Is it really necessary to specify dependecies explicitly?
+-$(3c509_drivers): 3c509.c 3c509.h
+-$(3c509_drivers): %.o: 3c509.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(3c509_drivers): 3c509.c 3c509.h
++#$(3c509_drivers): %.o: 3c509.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ $(3c595_drivers): 3c595.c 3c595.h
+ $(3c595_drivers): %.o: 3c595.c
+@@ -73,23 +87,28 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(cs89x0_drivers): cs89x0.c cs89x0.h
+-$(cs89x0_drivers): %.o: cs89x0.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(cs89x0_drivers): cs89x0.c cs89x0.h
++#$(cs89x0_drivers): %.o: cs89x0.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ $(davicom_drivers): davicom.c
+ $(davicom_drivers): %.o: davicom.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(depca_drivers): depca.c
+-$(depca_drivers): %.o: depca.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(depca_drivers): depca.c
++#$(depca_drivers): %.o: depca.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++#$(eepro_drivers): eepro.c
++#$(eepro_drivers): %.o: eepro.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(eepro_drivers): eepro.c
+-$(eepro_drivers): %.o: eepro.c
++$(e1000_drivers): e1000.c e1000_hw.h
++$(e1000_drivers): %.o: e1000.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+@@ -103,28 +122,38 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
++$(forcedeth_drivers): forcedeth.c
++$(forcedeth_drivers): %.o: forcedeth.c
++	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
+ #$(fa311_drivers): fa311.c
+ #$(fa311_drivers): %.o: fa311.c
+ #	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ #	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(i82586_drivers): i82586.c
+-$(i82586_drivers): %.o: i82586.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(i82586_drivers): i82586.c
++#$(i82586_drivers): %.o: i82586.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(lance_drivers): lance.c
+-$(lance_drivers): %.o: lance.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(lance_drivers): lance.c
++#$(lance_drivers): %.o: lance.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ $(natsemi_drivers): natsemi.c
+ $(natsemi_drivers): %.o: natsemi.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(ni5010_drivers): ni5010.c
+-$(ni5010_drivers): %.o: ni5010.c
++#$(ni5010_drivers): ni5010.c
++#$(ni5010_drivers): %.o: ni5010.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(ns83820_drivers): ns83820.c
++$(ns83820_drivers): %.o: ns83820.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+@@ -133,8 +162,18 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(otulip_drivers): otulip.c otulip.h
+-$(otulip_drivers): %.o: otulip.c
++#$(otulip_drivers): otulip.c otulip.h
++#$(otulip_drivers): %.o: otulip.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(pcnet32_drivers): pcnet32.c
++$(pcnet32_drivers): %.o: pcnet32.c
++	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(pnic_drivers): pnic.c
++$(pnic_drivers): %.o: pnic.c pnic_api.h
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+@@ -143,36 +182,56 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(sis900_drivers): sis900.c
+-$(sis900_drivers): %.o: sis900.c sis900.h
++$(r8169_drivers): r8169.c
++$(r8169_drivers): %.o: r8169.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(sk_g16_drivers): sk_g16.c sk_g16.h
+-$(sk_g16_drivers): %.o: sk_g16.c
++$(sis900_drivers): sis900.c sis900.h
++$(sis900_drivers): %.o: sis900.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(smc9000_drivers): smc9000.c smc9000.h
+-$(smc9000_drivers): %.o: smc9000.c
++#$(sk_g16_drivers): sk_g16.c sk_g16.h
++#$(sk_g16_drivers): %.o: sk_g16.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++#$(smc9000_drivers): smc9000.c smc9000.h
++#$(smc9000_drivers): %.o: smc9000.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(sundance_drivers): sundance.c
++$(sundance_drivers): %.o: sundance.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(tiara_drivers): tiara.c
+-$(tiara_drivers): %.o: tiara.c
++$(tg3_drivers): tg3.c tg3.h
++$(tg3_drivers): %.o: tg3.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-#$(tlan_drivers): tlan.c
+-#$(tlan_drivers): %.o: tlan.c
++#$(tiara_drivers): tiara.c
++#$(tiara_drivers): %.o: tiara.c
+ #	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ #	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
++$(tlan_drivers): tlan.c tlan.h
++$(tlan_drivers): %.o: tlan.c
++	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
+ $(tulip_drivers): tulip.c
+ $(tulip_drivers): %.o: tulip.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
++$(undi_drivers): undi.c undi.h
++$(undi_drivers): %.o: undi.c
++	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++          $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
+ $(via_rhine_drivers): via-rhine.c
+ $(via_rhine_drivers): %.o: via-rhine.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+@@ -184,36 +243,45 @@
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ # Per-object flags.
+-3c509_o_CFLAGS = -DINCLUDE_3C509=1
+-3c529_o_CFLAGS = -DINCLUDE_3C529=1
++#3c509_o_CFLAGS = -DINCLUDE_3C509=1
++#3c529_o_CFLAGS = -DINCLUDE_3C529=1
+ 3c595_o_CFLAGS = -DINCLUDE_3C595=1
+ 3c90x_o_CFLAGS = -DINCLUDE_3C90X=1
+-cs89x0_o_CFLAGS = -DINCLUDE_CS89X0=1
++#cs89x0_o_CFLAGS = -DINCLUDE_CS89X0=1
+ davicom_o_CFLAGS = -DINCLUDE_DAVICOM=1
+-depca_o_CFLAGS = -DINCLUDE_DEPCA=1
+-eepro_o_CFLAGS = -DINCLUDE_EEPRO=1
++#depca_o_CFLAGS = -DINCLUDE_DEPCA=1
++#eepro_o_CFLAGS = -DINCLUDE_EEPRO=1
++e1000_o_CFLAGS = -DINCLUDE_E1000=1
+ eepro100_o_CFLAGS = -DINCLUDE_EEPRO100=1
+ epic100_o_CFLAGS = -DINCLUDE_EPIC100=1
+ #fa311_o_CFLAGS = -DINCLUDE_FA311=1
+-3c507_o_CFLAGS = -DINCLUDE_3C507=1
+-exos205_o_CFLAGS = -DINCLUDE_EXOS205=1
+-ni5210_o_CFLAGS = -DINCLUDE_NI5210=1
+-lance_o_CFLAGS = -DINCLUDE_LANCE=1
+-ne2100_o_CFLAGS = -DINCLUDE_NE2100=1
+-ni6510_o_CFLAGS = -DINCLUDE_NI6510=1
++forcedeth_o_CFLAGS = -DINCLUDE_FORCEDETH=1
++#3c507_o_CFLAGS = -DINCLUDE_3C507=1
++#exos205_o_CFLAGS = -DINCLUDE_EXOS205=1
++#ni5210_o_CFLAGS = -DINCLUDE_NI5210=1
++#lance_o_CFLAGS = -DINCLUDE_LANCE=1
++#ne2100_o_CFLAGS = -DINCLUDE_NE2100=1
++#ni6510_o_CFLAGS = -DINCLUDE_NI6510=1
+ natsemi_o_CFLAGS = -DINCLUDE_NATSEMI=1
+-ni5010_o_CFLAGS = -DINCLUDE_NI5010=1
+-3c503_o_CFLAGS = -DINCLUDE_3C503=1
+-ne_o_CFLAGS = -DINCLUDE_NE=1
++#ni5010_o_CFLAGS = -DINCLUDE_NI5010=1
++#3c503_o_CFLAGS = -DINCLUDE_3C503=1
++#ne_o_CFLAGS = -DINCLUDE_NE=1
++ns83820_o_CFLAGS = -DINCLUDE_NS83820=1
+ ns8390_o_CFLAGS = -DINCLUDE_NS8390=1
+-wd_o_CFLAGS = -DINCLUDE_WD=1
+-otulip_o_CFLAGS = -DINCLUDE_OTULIP=1
++#wd_o_CFLAGS = -DINCLUDE_WD=1
++#otulip_o_CFLAGS = -DINCLUDE_OTULIP=1
++pcnet32_o_CFLAGS = -DINCLUDE_PCNET32=1
++pnic_o_CFLAGS = -DINCLUDE_PNIC=1
++r8169_o_CFLAGS = -DINCLUDE_R8169=1
+ rtl8139_o_CFLAGS = -DINCLUDE_RTL8139=1
+ sis900_o_CFLAGS = -DINCLUDE_SIS900=1
+-sk_g16_o_CFLAGS = -DINCLUDE_SK_G16=1
+-smc9000_o_CFLAGS = -DINCLUDE_SMC9000=1
+-tiara_o_CFLAGS = -DINCLUDE_TIARA=1
+-#tlan_o_CFLAGS = -DINCLUDE_TLAN=1
++#sk_g16_o_CFLAGS = -DINCLUDE_SK_G16=1
++#smc9000_o_CFLAGS = -DINCLUDE_SMC9000=1
++sundance_o_CFLAGS = -DINCLUDE_SUNDANCE=1
++#tiara_o_CFLAGS = -DINCLUDE_TIARA=1
++tg3_o_CFLAGS = -DINCLUDE_TG3=1
++tlan_o_CFLAGS = -DINCLUDE_TLAN=1
+ tulip_o_CFLAGS = -DINCLUDE_TULIP=1
++undi_o_CFLAGS = -DINCLUDE_UNDI=1
+ via_rhine_o_CFLAGS = -DINCLUDE_VIA_RHINE=1
+ w89c840_o_CFLAGS = -DINCLUDE_W89C840=1
+diff -Naur grub-0.97.orig/netboot/Makefile.in grub-0.97/netboot/Makefile.in
+--- grub-0.97.orig/netboot/Makefile.in	2005-05-08 02:42:35.000000000 +0000
++++ grub-0.97/netboot/Makefile.in	2005-09-01 00:14:15.000000000 +0000
+@@ -48,18 +47,51 @@
+ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+ CONFIG_HEADER = $(top_builddir)/config.h
+ CONFIG_CLEAN_FILES =
+-LIBRARIES = $(noinst_LIBRARIES)
+ AR = ar
+ ARFLAGS = cru
++LIBRARIES = $(noinst_LIBRARIES)
+ libdrivers_a_AR = $(AR) $(ARFLAGS)
+ am_libdrivers_a_OBJECTS = libdrivers_a-config.$(OBJEXT) \
+-	libdrivers_a-fsys_tftp.$(OBJEXT) libdrivers_a-main.$(OBJEXT) \
+-	libdrivers_a-misc.$(OBJEXT) libdrivers_a-pci.$(OBJEXT) \
+-	libdrivers_a-timer.$(OBJEXT)
++	libdrivers_a-fsys_tftp.$(OBJEXT) \
++	libdrivers_a-i386_timer.$(OBJEXT) libdrivers_a-misc.$(OBJEXT) \
++	libdrivers_a-nic.$(OBJEXT) libdrivers_a-pci.$(OBJEXT) \
++	libdrivers_a-pci_io.$(OBJEXT) libdrivers_a-timer.$(OBJEXT) \
++	libdrivers_a-pic8259.$(OBJEXT) libdrivers_a-basemem.$(OBJEXT)
+ libdrivers_a_OBJECTS = $(am_libdrivers_a_OBJECTS)
+ DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+ depcomp = $(SHELL) $(top_srcdir)/depcomp
+ am__depfiles_maybe = depfiles
++@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/libdrivers_a-3c595.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-3c90x.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-basemem.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-config.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-davicom.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-e1000.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-eepro100.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-epic100.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-forcedeth.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-fsys_tftp.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-i386_timer.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-misc.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-natsemi.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-nic.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-ns83820.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-ns8390.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-pci.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-pci_io.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-pcnet32.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-pic8259.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-pnic.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-pnic_api.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-r8169.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-rtl8139.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-sis900.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-tg3.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-timer.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-tlan.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-tulip.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-via-rhine.Po \
++@AMDEP_TRUE@	./$(DEPDIR)/libdrivers_a-w89c840.Po
+ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+ CCLD = $(CC)
+@@ -148,8 +180,6 @@
+ am__include = @am__include@
+ am__leading_dot = @am__leading_dot@
+ am__quote = @am__quote@
+-am__tar = @am__tar@
+-am__untar = @am__untar@
+ bindir = @bindir@
+ build = @build@
+ build_alias = @build_alias@
+@@ -186,16 +216,19 @@
+ # Don't build the netboot support by default.
+ @NETBOOT_SUPPORT_TRUE@LIBDRIVERS = libdrivers.a
+ noinst_LIBRARIES = $(LIBDRIVERS)
+-libdrivers_a_SOURCES = cards.h config.c etherboot.h \
+-	fsys_tftp.c linux-asm-io.h linux-asm-string.h \
+-	main.c misc.c nic.h osdep.h pci.c pci.h timer.c timer.h
+-
+-EXTRA_libdrivers_a_SOURCES = 3c509.c 3c509.h 3c595.c 3c595.h 3c90x.c \
+-	cs89x0.c cs89x0.h davicom.c depca.c eepro.c eepro100.c \
+-	epic100.c epic100.h fa311.c i82586.c lance.c natsemi.c \
+-	ni5010.c ns8390.c ns8390.h otulip.c otulip.h rtl8139.c \
+-	sis900.c sis900.h sk_g16.c sk_g16.h smc9000.c smc9000.h \
+-	tiara.c tlan.c tulip.c via-rhine.c w89c840.c
++libdrivers_a_SOURCES = big_bswap.h bootp.h byteswap.h config.c cpu.h \
++	dev.h elf.h endian.h etherboot.h fsys_tftp.c grub.h \
++	i386_byteswap.h i386_elf.h i386_endian.h i386_timer.c \
++	if_arp.h if_ether.h igmp.h in.h io.h ip.h isa.h latch.h \
++	little_bswap.h misc.c nic.c nic.h osdep.h pci.c pci.h \
++	pci_ids.h pci_io.c stdint.h tftp.h timer.c timer.h \
++	types.h udp.h mii.h pic8259.c pic8259.h pxe.h basemem.c segoff.h
++
++EXTRA_libdrivers_a_SOURCES = 3c595.c 3c595.h 3c90x.c davicom.c \
++	e1000.c e1000_hw.h eepro100.c epic100.c epic100.h natsemi.c \
++	ns8390.c ns8390.h pcnet32.c rtl8139.c sis900.c sis900.h \
++	tg3.c tg3.h tlan.c tlan.h tulip.c via-rhine.c \
++	w89c840.c r8169.c forcedeth.c ns83820.c pnic.c pnic_api.c 
+ 
+ libdrivers_a_CFLAGS = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	-DFSYS_TFTP=1 $(NET_CFLAGS) $(NET_EXTRAFLAGS)
+@@ -203,69 +236,83 @@
+ # Filled by configure.
+ libdrivers_a_LIBADD = @NETBOOT_DRIVERS@
+ libdrivers_a_DEPENDENCIES = $(libdrivers_a_LIBADD)
+-EXTRA_DIST = README.netboot 3c90x.txt cs89x0.txt sis900.txt tulip.txt
++EXTRA_DIST = README.netboot
+ 
+ # These below are several special rules for the device drivers.
+ # We cannot use a simple rule for them...
+ 
+ # What objects are derived from a driver?
+-3c509_drivers = 3c509.o 3c529.o
++#3c509_drivers = 3c509.o 3c529.o
+ 3c595_drivers = 3c595.o
+ 3c90x_drivers = 3c90x.o
+-cs89x0_drivers = cs89x0.o
++#cs89x0_drivers = cs89x0.o
+ davicom_drivers = davicom.o
+-depca_drivers = depca.o
+-eepro_drivers = eepro.o
++#depca_drivers = depca.o
++#eepro_drivers = eepro.o
++e1000_drivers = e1000.o
+ eepro100_drivers = eepro100.o
+ epic100_drivers = epic100.o
+ #fa311_drivers = fa311.o
+-i82586_drivers = 3c507.o exos205.o ni5210.o
+-lance_drivers = lance.o ne2100.o ni6510.o
++forcedeth_drivers = forcedeth.o
++#i82586_drivers = 3c507.o exos205.o ni5210.o
++#lance_drivers = lance.o ne2100.o ni6510.o
+ natsemi_drivers = natsemi.o
+-ni5010_drivers = ni5010.o
++#ni5010_drivers = ni5010.o
++ns83820_drivers = ns83820.o
+ ns8390_drivers = 3c503.o ne.o ns8390.o wd.o
+-otulip_drivers = otulip.o
++#otulip_drivers = otulip.o
++pcnet32_drivers = pcnet32.o
++pnic_drivers = pnic.o
++r8169_drivers = r8169.o
+ rtl8139_drivers = rtl8139.o
+ sis900_drivers = sis900.o
+-sk_g16_drivers = sk_g16.o
+-smc9000_drivers = smc9000.o
+-tiara_drivers = tiara.o
+-#tlan_drivers = tlan.o
++#sk_g16_drivers = sk_g16.o
++#smc9000_drivers = smc9000.o
++tg3_drivers = tg3.o
++#tiara_drivers = tiara.o
++tlan_drivers = tlan.o
+ tulip_drivers = tulip.o
+ via_rhine_drivers = via_rhine.o
+ w89c840_drivers = w89c840.o
+ 
+ # Per-object flags.
+-3c509_o_CFLAGS = -DINCLUDE_3C509=1
+-3c529_o_CFLAGS = -DINCLUDE_3C529=1
++#3c509_o_CFLAGS = -DINCLUDE_3C509=1
++#3c529_o_CFLAGS = -DINCLUDE_3C529=1
+ 3c595_o_CFLAGS = -DINCLUDE_3C595=1
+ 3c90x_o_CFLAGS = -DINCLUDE_3C90X=1
+-cs89x0_o_CFLAGS = -DINCLUDE_CS89X0=1
++#cs89x0_o_CFLAGS = -DINCLUDE_CS89X0=1
+ davicom_o_CFLAGS = -DINCLUDE_DAVICOM=1
+-depca_o_CFLAGS = -DINCLUDE_DEPCA=1
+-eepro_o_CFLAGS = -DINCLUDE_EEPRO=1
++#depca_o_CFLAGS = -DINCLUDE_DEPCA=1
++#eepro_o_CFLAGS = -DINCLUDE_EEPRO=1
++e1000_o_CFLAGS = -DINCLUDE_E1000=1
+ eepro100_o_CFLAGS = -DINCLUDE_EEPRO100=1
+ epic100_o_CFLAGS = -DINCLUDE_EPIC100=1
+ #fa311_o_CFLAGS = -DINCLUDE_FA311=1
+-3c507_o_CFLAGS = -DINCLUDE_3C507=1
+-exos205_o_CFLAGS = -DINCLUDE_EXOS205=1
+-ni5210_o_CFLAGS = -DINCLUDE_NI5210=1
+-lance_o_CFLAGS = -DINCLUDE_LANCE=1
+-ne2100_o_CFLAGS = -DINCLUDE_NE2100=1
+-ni6510_o_CFLAGS = -DINCLUDE_NI6510=1
++forcedeth_o_CFLAGS = -DINCLUDE_FORCEDETH=1
++#3c507_o_CFLAGS = -DINCLUDE_3C507=1
++#exos205_o_CFLAGS = -DINCLUDE_EXOS205=1
++#ni5210_o_CFLAGS = -DINCLUDE_NI5210=1
++#lance_o_CFLAGS = -DINCLUDE_LANCE=1
++#ne2100_o_CFLAGS = -DINCLUDE_NE2100=1
++#ni6510_o_CFLAGS = -DINCLUDE_NI6510=1
+ natsemi_o_CFLAGS = -DINCLUDE_NATSEMI=1
+-ni5010_o_CFLAGS = -DINCLUDE_NI5010=1
+-3c503_o_CFLAGS = -DINCLUDE_3C503=1
+-ne_o_CFLAGS = -DINCLUDE_NE=1
++#ni5010_o_CFLAGS = -DINCLUDE_NI5010=1
++#3c503_o_CFLAGS = -DINCLUDE_3C503=1
++#ne_o_CFLAGS = -DINCLUDE_NE=1
++ns83820_o_CFLAGS = -DINCLUDE_NS83820=1
+ ns8390_o_CFLAGS = -DINCLUDE_NS8390=1
+-wd_o_CFLAGS = -DINCLUDE_WD=1
+-otulip_o_CFLAGS = -DINCLUDE_OTULIP=1
++#wd_o_CFLAGS = -DINCLUDE_WD=1
++#otulip_o_CFLAGS = -DINCLUDE_OTULIP=1
++pcnet32_o_CFLAGS = -DINCLUDE_PCNET32=1
++pnic_o_CFLAGS = -DINCLUDE_PNIC=1
++r8169_o_CFLAGS = -DINCLUDE_R8169=1
+ rtl8139_o_CFLAGS = -DINCLUDE_RTL8139=1
+ sis900_o_CFLAGS = -DINCLUDE_SIS900=1
+-sk_g16_o_CFLAGS = -DINCLUDE_SK_G16=1
+-smc9000_o_CFLAGS = -DINCLUDE_SMC9000=1
+-tiara_o_CFLAGS = -DINCLUDE_TIARA=1
+-#tlan_o_CFLAGS = -DINCLUDE_TLAN=1
++#sk_g16_o_CFLAGS = -DINCLUDE_SK_G16=1
++#smc9000_o_CFLAGS = -DINCLUDE_SMC9000=1
++#tiara_o_CFLAGS = -DINCLUDE_TIARA=1
++tg3_o_CFLAGS = -DINCLUDE_TG3=1
++tlan_o_CFLAGS = -DINCLUDE_TLAN=1
+ tulip_o_CFLAGS = -DINCLUDE_TULIP=1
+ via_rhine_o_CFLAGS = -DINCLUDE_VIA_RHINE=1
+ w89c840_o_CFLAGS = -DINCLUDE_W89C840=1
+@@ -316,32 +363,32 @@
+ distclean-compile:
+ 	-rm -f *.tab.c
+ 
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c509.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c595.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c90x.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-basemem.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-config.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-cs89x0.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-davicom.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-depca.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-eepro.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-e1000.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-eepro100.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-epic100.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-fa311.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-forcedeth.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-fsys_tftp.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-i82586.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-lance.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-main.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-i386_timer.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-misc.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-natsemi.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ni5010.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-nic.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ns83820.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ns8390.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-otulip.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pci.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pci_io.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pcnet32.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pic8259.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pnic.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pnic_api.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-r8169.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-rtl8139.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-sis900.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-sk_g16.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-smc9000.Po@am__quote@
+-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tiara.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tg3.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-timer.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tlan.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tulip.Po@am__quote@
+@@ -352,450 +399,513 @@
+ @am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(COMPILE) -c $<
+ 
+ .c.obj:
+ @am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ 
+ libdrivers_a-config.o: config.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-config.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-config.Tpo" -c -o libdrivers_a-config.o `test -f 'config.c' || echo '$(srcdir)/'`config.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-config.Tpo" "$(DEPDIR)/libdrivers_a-config.Po"; else rm -f "$(DEPDIR)/libdrivers_a-config.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='config.c' object='libdrivers_a-config.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-config.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-config.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-config.o `test -f 'config.c' || echo '$(srcdir)/'`config.c
+ 
+ libdrivers_a-config.obj: config.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-config.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-config.Tpo" -c -o libdrivers_a-config.obj `if test -f 'config.c'; then $(CYGPATH_W) 'config.c'; else $(CYGPATH_W) '$(srcdir)/config.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-config.Tpo" "$(DEPDIR)/libdrivers_a-config.Po"; else rm -f "$(DEPDIR)/libdrivers_a-config.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='config.c' object='libdrivers_a-config.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-config.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-config.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-config.obj `if test -f 'config.c'; then $(CYGPATH_W) 'config.c'; else $(CYGPATH_W) '$(srcdir)/config.c'; fi`
+ 
+ libdrivers_a-fsys_tftp.o: fsys_tftp.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fsys_tftp.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" -c -o libdrivers_a-fsys_tftp.o `test -f 'fsys_tftp.c' || echo '$(srcdir)/'`fsys_tftp.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" "$(DEPDIR)/libdrivers_a-fsys_tftp.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fsys_tftp.c' object='libdrivers_a-fsys_tftp.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-fsys_tftp.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-fsys_tftp.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fsys_tftp.o `test -f 'fsys_tftp.c' || echo '$(srcdir)/'`fsys_tftp.c
+ 
+ libdrivers_a-fsys_tftp.obj: fsys_tftp.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fsys_tftp.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" -c -o libdrivers_a-fsys_tftp.obj `if test -f 'fsys_tftp.c'; then $(CYGPATH_W) 'fsys_tftp.c'; else $(CYGPATH_W) '$(srcdir)/fsys_tftp.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" "$(DEPDIR)/libdrivers_a-fsys_tftp.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fsys_tftp.c' object='libdrivers_a-fsys_tftp.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-fsys_tftp.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-fsys_tftp.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fsys_tftp.obj `if test -f 'fsys_tftp.c'; then $(CYGPATH_W) 'fsys_tftp.c'; else $(CYGPATH_W) '$(srcdir)/fsys_tftp.c'; fi`
+ 
+-libdrivers_a-main.o: main.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-main.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-main.Tpo" -c -o libdrivers_a-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-main.Tpo" "$(DEPDIR)/libdrivers_a-main.Po"; else rm -f "$(DEPDIR)/libdrivers_a-main.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='main.c' object='libdrivers_a-main.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
+-
+-libdrivers_a-main.obj: main.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-main.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-main.Tpo" -c -o libdrivers_a-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-main.Tpo" "$(DEPDIR)/libdrivers_a-main.Po"; else rm -f "$(DEPDIR)/libdrivers_a-main.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='main.c' object='libdrivers_a-main.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
++libdrivers_a-i386_timer.o: i386_timer.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i386_timer.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-i386_timer.Tpo" -c -o libdrivers_a-i386_timer.o `test -f 'i386_timer.c' || echo '$(srcdir)/'`i386_timer.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-i386_timer.Tpo" "$(DEPDIR)/libdrivers_a-i386_timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i386_timer.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='i386_timer.c' object='libdrivers_a-i386_timer.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-i386_timer.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-i386_timer.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i386_timer.o `test -f 'i386_timer.c' || echo '$(srcdir)/'`i386_timer.c
++
++libdrivers_a-i386_timer.obj: i386_timer.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i386_timer.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-i386_timer.Tpo" -c -o libdrivers_a-i386_timer.obj `if test -f 'i386_timer.c'; then $(CYGPATH_W) 'i386_timer.c'; else $(CYGPATH_W) '$(srcdir)/i386_timer.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-i386_timer.Tpo" "$(DEPDIR)/libdrivers_a-i386_timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i386_timer.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='i386_timer.c' object='libdrivers_a-i386_timer.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-i386_timer.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-i386_timer.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i386_timer.obj `if test -f 'i386_timer.c'; then $(CYGPATH_W) 'i386_timer.c'; else $(CYGPATH_W) '$(srcdir)/i386_timer.c'; fi`
+ 
+ libdrivers_a-misc.o: misc.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-misc.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-misc.Tpo" -c -o libdrivers_a-misc.o `test -f 'misc.c' || echo '$(srcdir)/'`misc.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-misc.Tpo" "$(DEPDIR)/libdrivers_a-misc.Po"; else rm -f "$(DEPDIR)/libdrivers_a-misc.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='misc.c' object='libdrivers_a-misc.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-misc.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-misc.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-misc.o `test -f 'misc.c' || echo '$(srcdir)/'`misc.c
+ 
+ libdrivers_a-misc.obj: misc.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-misc.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-misc.Tpo" -c -o libdrivers_a-misc.obj `if test -f 'misc.c'; then $(CYGPATH_W) 'misc.c'; else $(CYGPATH_W) '$(srcdir)/misc.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-misc.Tpo" "$(DEPDIR)/libdrivers_a-misc.Po"; else rm -f "$(DEPDIR)/libdrivers_a-misc.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='misc.c' object='libdrivers_a-misc.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-misc.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-misc.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-misc.obj `if test -f 'misc.c'; then $(CYGPATH_W) 'misc.c'; else $(CYGPATH_W) '$(srcdir)/misc.c'; fi`
+ 
++libdrivers_a-nic.o: nic.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-nic.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-nic.Tpo" -c -o libdrivers_a-nic.o `test -f 'nic.c' || echo '$(srcdir)/'`nic.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-nic.Tpo" "$(DEPDIR)/libdrivers_a-nic.Po"; else rm -f "$(DEPDIR)/libdrivers_a-nic.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='nic.c' object='libdrivers_a-nic.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-nic.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-nic.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-nic.o `test -f 'nic.c' || echo '$(srcdir)/'`nic.c
++
++libdrivers_a-nic.obj: nic.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-nic.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-nic.Tpo" -c -o libdrivers_a-nic.obj `if test -f 'nic.c'; then $(CYGPATH_W) 'nic.c'; else $(CYGPATH_W) '$(srcdir)/nic.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-nic.Tpo" "$(DEPDIR)/libdrivers_a-nic.Po"; else rm -f "$(DEPDIR)/libdrivers_a-nic.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='nic.c' object='libdrivers_a-nic.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-nic.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-nic.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-nic.obj `if test -f 'nic.c'; then $(CYGPATH_W) 'nic.c'; else $(CYGPATH_W) '$(srcdir)/nic.c'; fi`
++
+ libdrivers_a-pci.o: pci.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci.Tpo" -c -o libdrivers_a-pci.o `test -f 'pci.c' || echo '$(srcdir)/'`pci.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pci.Tpo" "$(DEPDIR)/libdrivers_a-pci.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pci.c' object='libdrivers_a-pci.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pci.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pci.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci.o `test -f 'pci.c' || echo '$(srcdir)/'`pci.c
+ 
+ libdrivers_a-pci.obj: pci.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci.Tpo" -c -o libdrivers_a-pci.obj `if test -f 'pci.c'; then $(CYGPATH_W) 'pci.c'; else $(CYGPATH_W) '$(srcdir)/pci.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pci.Tpo" "$(DEPDIR)/libdrivers_a-pci.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pci.c' object='libdrivers_a-pci.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pci.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pci.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci.obj `if test -f 'pci.c'; then $(CYGPATH_W) 'pci.c'; else $(CYGPATH_W) '$(srcdir)/pci.c'; fi`
+ 
++libdrivers_a-pci_io.o: pci_io.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci_io.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci_io.Tpo" -c -o libdrivers_a-pci_io.o `test -f 'pci_io.c' || echo '$(srcdir)/'`pci_io.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pci_io.Tpo" "$(DEPDIR)/libdrivers_a-pci_io.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci_io.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pci_io.c' object='libdrivers_a-pci_io.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pci_io.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pci_io.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci_io.o `test -f 'pci_io.c' || echo '$(srcdir)/'`pci_io.c
++
++libdrivers_a-pci_io.obj: pci_io.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci_io.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci_io.Tpo" -c -o libdrivers_a-pci_io.obj `if test -f 'pci_io.c'; then $(CYGPATH_W) 'pci_io.c'; else $(CYGPATH_W) '$(srcdir)/pci_io.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pci_io.Tpo" "$(DEPDIR)/libdrivers_a-pci_io.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci_io.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pci_io.c' object='libdrivers_a-pci_io.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pci_io.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pci_io.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci_io.obj `if test -f 'pci_io.c'; then $(CYGPATH_W) 'pci_io.c'; else $(CYGPATH_W) '$(srcdir)/pci_io.c'; fi`
++
+ libdrivers_a-timer.o: timer.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-timer.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-timer.Tpo" -c -o libdrivers_a-timer.o `test -f 'timer.c' || echo '$(srcdir)/'`timer.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-timer.Tpo" "$(DEPDIR)/libdrivers_a-timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-timer.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='timer.c' object='libdrivers_a-timer.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-timer.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-timer.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-timer.o `test -f 'timer.c' || echo '$(srcdir)/'`timer.c
+ 
+ libdrivers_a-timer.obj: timer.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-timer.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-timer.Tpo" -c -o libdrivers_a-timer.obj `if test -f 'timer.c'; then $(CYGPATH_W) 'timer.c'; else $(CYGPATH_W) '$(srcdir)/timer.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-timer.Tpo" "$(DEPDIR)/libdrivers_a-timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-timer.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='timer.c' object='libdrivers_a-timer.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-timer.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-timer.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-timer.obj `if test -f 'timer.c'; then $(CYGPATH_W) 'timer.c'; else $(CYGPATH_W) '$(srcdir)/timer.c'; fi`
+ 
+-libdrivers_a-3c509.o: 3c509.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c509.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c509.Tpo" -c -o libdrivers_a-3c509.o `test -f '3c509.c' || echo '$(srcdir)/'`3c509.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-3c509.Tpo" "$(DEPDIR)/libdrivers_a-3c509.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c509.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='3c509.c' object='libdrivers_a-3c509.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c509.o `test -f '3c509.c' || echo '$(srcdir)/'`3c509.c
+-
+-libdrivers_a-3c509.obj: 3c509.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c509.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c509.Tpo" -c -o libdrivers_a-3c509.obj `if test -f '3c509.c'; then $(CYGPATH_W) '3c509.c'; else $(CYGPATH_W) '$(srcdir)/3c509.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-3c509.Tpo" "$(DEPDIR)/libdrivers_a-3c509.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c509.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='3c509.c' object='libdrivers_a-3c509.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c509.obj `if test -f '3c509.c'; then $(CYGPATH_W) '3c509.c'; else $(CYGPATH_W) '$(srcdir)/3c509.c'; fi`
++libdrivers_a-pic8259.o: pic8259.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pic8259.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pic8259.Tpo" -c -o libdrivers_a-pic8259.o `test -f 'pic8259.c' || echo '$(srcdir)/'`pic8259.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pic8259.Tpo" "$(DEPDIR)/libdrivers_a-pic8259.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pic8259.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pic8259.c' object='libdrivers_a-pic8259.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pic8259.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pic8259.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pic8259.o `test -f 'pic8259.c' || echo '$(srcdir)/'`pic8259.c
++
++libdrivers_a-pic8259.obj: pic8259.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pic8259.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pic8259.Tpo" -c -o libdrivers_a-pic8259.obj `if test -f 'pic8259.c'; then $(CYGPATH_W) 'pic8259.c'; else $(CYGPATH_W) '$(srcdir)/pic8259.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pic8259.Tpo" "$(DEPDIR)/libdrivers_a-pic8259.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pic8259.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pic8259.c' object='libdrivers_a-pic8259.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pic8259.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pic8259.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pic8259.obj `if test -f 'pic8259.c'; then $(CYGPATH_W) 'pic8259.c'; else $(CYGPATH_W) '$(srcdir)/pic8259.c'; fi`
++
++libdrivers_a-basemem.o: basemem.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-basemem.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-basemem.Tpo" -c -o libdrivers_a-basemem.o `test -f 'basemem.c' || echo '$(srcdir)/'`basemem.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-basemem.Tpo" "$(DEPDIR)/libdrivers_a-basemem.Po"; else rm -f "$(DEPDIR)/libdrivers_a-basemem.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='basemem.c' object='libdrivers_a-basemem.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-basemem.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-basemem.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-basemem.o `test -f 'basemem.c' || echo '$(srcdir)/'`basemem.c
++
++libdrivers_a-basemem.obj: basemem.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-basemem.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-basemem.Tpo" -c -o libdrivers_a-basemem.obj `if test -f 'basemem.c'; then $(CYGPATH_W) 'basemem.c'; else $(CYGPATH_W) '$(srcdir)/basemem.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-basemem.Tpo" "$(DEPDIR)/libdrivers_a-basemem.Po"; else rm -f "$(DEPDIR)/libdrivers_a-basemem.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='basemem.c' object='libdrivers_a-basemem.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-basemem.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-basemem.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-basemem.obj `if test -f 'basemem.c'; then $(CYGPATH_W) 'basemem.c'; else $(CYGPATH_W) '$(srcdir)/basemem.c'; fi`
+ 
+ libdrivers_a-3c595.o: 3c595.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c595.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c595.Tpo" -c -o libdrivers_a-3c595.o `test -f '3c595.c' || echo '$(srcdir)/'`3c595.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-3c595.Tpo" "$(DEPDIR)/libdrivers_a-3c595.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c595.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='3c595.c' object='libdrivers_a-3c595.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-3c595.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-3c595.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c595.o `test -f '3c595.c' || echo '$(srcdir)/'`3c595.c
+ 
+ libdrivers_a-3c595.obj: 3c595.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c595.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c595.Tpo" -c -o libdrivers_a-3c595.obj `if test -f '3c595.c'; then $(CYGPATH_W) '3c595.c'; else $(CYGPATH_W) '$(srcdir)/3c595.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-3c595.Tpo" "$(DEPDIR)/libdrivers_a-3c595.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c595.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='3c595.c' object='libdrivers_a-3c595.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-3c595.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-3c595.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c595.obj `if test -f '3c595.c'; then $(CYGPATH_W) '3c595.c'; else $(CYGPATH_W) '$(srcdir)/3c595.c'; fi`
+ 
+ libdrivers_a-3c90x.o: 3c90x.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c90x.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c90x.Tpo" -c -o libdrivers_a-3c90x.o `test -f '3c90x.c' || echo '$(srcdir)/'`3c90x.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo" "$(DEPDIR)/libdrivers_a-3c90x.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='3c90x.c' object='libdrivers_a-3c90x.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-3c90x.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-3c90x.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c90x.o `test -f '3c90x.c' || echo '$(srcdir)/'`3c90x.c
+ 
+ libdrivers_a-3c90x.obj: 3c90x.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c90x.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c90x.Tpo" -c -o libdrivers_a-3c90x.obj `if test -f '3c90x.c'; then $(CYGPATH_W) '3c90x.c'; else $(CYGPATH_W) '$(srcdir)/3c90x.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo" "$(DEPDIR)/libdrivers_a-3c90x.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='3c90x.c' object='libdrivers_a-3c90x.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-3c90x.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-3c90x.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c90x.obj `if test -f '3c90x.c'; then $(CYGPATH_W) '3c90x.c'; else $(CYGPATH_W) '$(srcdir)/3c90x.c'; fi`
+ 
+-libdrivers_a-cs89x0.o: cs89x0.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-cs89x0.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" -c -o libdrivers_a-cs89x0.o `test -f 'cs89x0.c' || echo '$(srcdir)/'`cs89x0.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" "$(DEPDIR)/libdrivers_a-cs89x0.Po"; else rm -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='cs89x0.c' object='libdrivers_a-cs89x0.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-cs89x0.o `test -f 'cs89x0.c' || echo '$(srcdir)/'`cs89x0.c
+-
+-libdrivers_a-cs89x0.obj: cs89x0.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-cs89x0.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" -c -o libdrivers_a-cs89x0.obj `if test -f 'cs89x0.c'; then $(CYGPATH_W) 'cs89x0.c'; else $(CYGPATH_W) '$(srcdir)/cs89x0.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" "$(DEPDIR)/libdrivers_a-cs89x0.Po"; else rm -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='cs89x0.c' object='libdrivers_a-cs89x0.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-cs89x0.obj `if test -f 'cs89x0.c'; then $(CYGPATH_W) 'cs89x0.c'; else $(CYGPATH_W) '$(srcdir)/cs89x0.c'; fi`
+-
+ libdrivers_a-davicom.o: davicom.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-davicom.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-davicom.Tpo" -c -o libdrivers_a-davicom.o `test -f 'davicom.c' || echo '$(srcdir)/'`davicom.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-davicom.Tpo" "$(DEPDIR)/libdrivers_a-davicom.Po"; else rm -f "$(DEPDIR)/libdrivers_a-davicom.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='davicom.c' object='libdrivers_a-davicom.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-davicom.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-davicom.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-davicom.o `test -f 'davicom.c' || echo '$(srcdir)/'`davicom.c
+ 
+ libdrivers_a-davicom.obj: davicom.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-davicom.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-davicom.Tpo" -c -o libdrivers_a-davicom.obj `if test -f 'davicom.c'; then $(CYGPATH_W) 'davicom.c'; else $(CYGPATH_W) '$(srcdir)/davicom.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-davicom.Tpo" "$(DEPDIR)/libdrivers_a-davicom.Po"; else rm -f "$(DEPDIR)/libdrivers_a-davicom.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='davicom.c' object='libdrivers_a-davicom.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-davicom.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-davicom.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-davicom.obj `if test -f 'davicom.c'; then $(CYGPATH_W) 'davicom.c'; else $(CYGPATH_W) '$(srcdir)/davicom.c'; fi`
+ 
+-libdrivers_a-depca.o: depca.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-depca.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-depca.Tpo" -c -o libdrivers_a-depca.o `test -f 'depca.c' || echo '$(srcdir)/'`depca.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-depca.Tpo" "$(DEPDIR)/libdrivers_a-depca.Po"; else rm -f "$(DEPDIR)/libdrivers_a-depca.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='depca.c' object='libdrivers_a-depca.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-depca.o `test -f 'depca.c' || echo '$(srcdir)/'`depca.c
+-
+-libdrivers_a-depca.obj: depca.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-depca.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-depca.Tpo" -c -o libdrivers_a-depca.obj `if test -f 'depca.c'; then $(CYGPATH_W) 'depca.c'; else $(CYGPATH_W) '$(srcdir)/depca.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-depca.Tpo" "$(DEPDIR)/libdrivers_a-depca.Po"; else rm -f "$(DEPDIR)/libdrivers_a-depca.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='depca.c' object='libdrivers_a-depca.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-depca.obj `if test -f 'depca.c'; then $(CYGPATH_W) 'depca.c'; else $(CYGPATH_W) '$(srcdir)/depca.c'; fi`
+-
+-libdrivers_a-eepro.o: eepro.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro.Tpo" -c -o libdrivers_a-eepro.o `test -f 'eepro.c' || echo '$(srcdir)/'`eepro.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-eepro.Tpo" "$(DEPDIR)/libdrivers_a-eepro.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='eepro.c' object='libdrivers_a-eepro.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro.o `test -f 'eepro.c' || echo '$(srcdir)/'`eepro.c
+-
+-libdrivers_a-eepro.obj: eepro.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro.Tpo" -c -o libdrivers_a-eepro.obj `if test -f 'eepro.c'; then $(CYGPATH_W) 'eepro.c'; else $(CYGPATH_W) '$(srcdir)/eepro.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-eepro.Tpo" "$(DEPDIR)/libdrivers_a-eepro.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='eepro.c' object='libdrivers_a-eepro.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro.obj `if test -f 'eepro.c'; then $(CYGPATH_W) 'eepro.c'; else $(CYGPATH_W) '$(srcdir)/eepro.c'; fi`
++libdrivers_a-e1000.o: e1000.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-e1000.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-e1000.Tpo" -c -o libdrivers_a-e1000.o `test -f 'e1000.c' || echo '$(srcdir)/'`e1000.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-e1000.Tpo" "$(DEPDIR)/libdrivers_a-e1000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-e1000.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='e1000.c' object='libdrivers_a-e1000.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-e1000.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-e1000.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-e1000.o `test -f 'e1000.c' || echo '$(srcdir)/'`e1000.c
++
++libdrivers_a-e1000.obj: e1000.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-e1000.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-e1000.Tpo" -c -o libdrivers_a-e1000.obj `if test -f 'e1000.c'; then $(CYGPATH_W) 'e1000.c'; else $(CYGPATH_W) '$(srcdir)/e1000.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-e1000.Tpo" "$(DEPDIR)/libdrivers_a-e1000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-e1000.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='e1000.c' object='libdrivers_a-e1000.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-e1000.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-e1000.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-e1000.obj `if test -f 'e1000.c'; then $(CYGPATH_W) 'e1000.c'; else $(CYGPATH_W) '$(srcdir)/e1000.c'; fi`
+ 
+ libdrivers_a-eepro100.o: eepro100.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro100.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro100.Tpo" -c -o libdrivers_a-eepro100.o `test -f 'eepro100.c' || echo '$(srcdir)/'`eepro100.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo" "$(DEPDIR)/libdrivers_a-eepro100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='eepro100.c' object='libdrivers_a-eepro100.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-eepro100.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-eepro100.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro100.o `test -f 'eepro100.c' || echo '$(srcdir)/'`eepro100.c
+ 
+ libdrivers_a-eepro100.obj: eepro100.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro100.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro100.Tpo" -c -o libdrivers_a-eepro100.obj `if test -f 'eepro100.c'; then $(CYGPATH_W) 'eepro100.c'; else $(CYGPATH_W) '$(srcdir)/eepro100.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo" "$(DEPDIR)/libdrivers_a-eepro100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='eepro100.c' object='libdrivers_a-eepro100.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-eepro100.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-eepro100.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro100.obj `if test -f 'eepro100.c'; then $(CYGPATH_W) 'eepro100.c'; else $(CYGPATH_W) '$(srcdir)/eepro100.c'; fi`
+ 
+ libdrivers_a-epic100.o: epic100.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-epic100.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-epic100.Tpo" -c -o libdrivers_a-epic100.o `test -f 'epic100.c' || echo '$(srcdir)/'`epic100.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-epic100.Tpo" "$(DEPDIR)/libdrivers_a-epic100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-epic100.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='epic100.c' object='libdrivers_a-epic100.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-epic100.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-epic100.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-epic100.o `test -f 'epic100.c' || echo '$(srcdir)/'`epic100.c
+ 
+ libdrivers_a-epic100.obj: epic100.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-epic100.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-epic100.Tpo" -c -o libdrivers_a-epic100.obj `if test -f 'epic100.c'; then $(CYGPATH_W) 'epic100.c'; else $(CYGPATH_W) '$(srcdir)/epic100.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-epic100.Tpo" "$(DEPDIR)/libdrivers_a-epic100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-epic100.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='epic100.c' object='libdrivers_a-epic100.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-epic100.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-epic100.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-epic100.obj `if test -f 'epic100.c'; then $(CYGPATH_W) 'epic100.c'; else $(CYGPATH_W) '$(srcdir)/epic100.c'; fi`
+ 
+-libdrivers_a-fa311.o: fa311.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fa311.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-fa311.Tpo" -c -o libdrivers_a-fa311.o `test -f 'fa311.c' || echo '$(srcdir)/'`fa311.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-fa311.Tpo" "$(DEPDIR)/libdrivers_a-fa311.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fa311.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fa311.c' object='libdrivers_a-fa311.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fa311.o `test -f 'fa311.c' || echo '$(srcdir)/'`fa311.c
+-
+-libdrivers_a-fa311.obj: fa311.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fa311.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-fa311.Tpo" -c -o libdrivers_a-fa311.obj `if test -f 'fa311.c'; then $(CYGPATH_W) 'fa311.c'; else $(CYGPATH_W) '$(srcdir)/fa311.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-fa311.Tpo" "$(DEPDIR)/libdrivers_a-fa311.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fa311.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fa311.c' object='libdrivers_a-fa311.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fa311.obj `if test -f 'fa311.c'; then $(CYGPATH_W) 'fa311.c'; else $(CYGPATH_W) '$(srcdir)/fa311.c'; fi`
+-
+-libdrivers_a-i82586.o: i82586.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i82586.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-i82586.Tpo" -c -o libdrivers_a-i82586.o `test -f 'i82586.c' || echo '$(srcdir)/'`i82586.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-i82586.Tpo" "$(DEPDIR)/libdrivers_a-i82586.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i82586.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='i82586.c' object='libdrivers_a-i82586.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i82586.o `test -f 'i82586.c' || echo '$(srcdir)/'`i82586.c
+-
+-libdrivers_a-i82586.obj: i82586.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i82586.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-i82586.Tpo" -c -o libdrivers_a-i82586.obj `if test -f 'i82586.c'; then $(CYGPATH_W) 'i82586.c'; else $(CYGPATH_W) '$(srcdir)/i82586.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-i82586.Tpo" "$(DEPDIR)/libdrivers_a-i82586.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i82586.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='i82586.c' object='libdrivers_a-i82586.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i82586.obj `if test -f 'i82586.c'; then $(CYGPATH_W) 'i82586.c'; else $(CYGPATH_W) '$(srcdir)/i82586.c'; fi`
+-
+-libdrivers_a-lance.o: lance.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-lance.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-lance.Tpo" -c -o libdrivers_a-lance.o `test -f 'lance.c' || echo '$(srcdir)/'`lance.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-lance.Tpo" "$(DEPDIR)/libdrivers_a-lance.Po"; else rm -f "$(DEPDIR)/libdrivers_a-lance.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lance.c' object='libdrivers_a-lance.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-lance.o `test -f 'lance.c' || echo '$(srcdir)/'`lance.c
+-
+-libdrivers_a-lance.obj: lance.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-lance.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-lance.Tpo" -c -o libdrivers_a-lance.obj `if test -f 'lance.c'; then $(CYGPATH_W) 'lance.c'; else $(CYGPATH_W) '$(srcdir)/lance.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-lance.Tpo" "$(DEPDIR)/libdrivers_a-lance.Po"; else rm -f "$(DEPDIR)/libdrivers_a-lance.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lance.c' object='libdrivers_a-lance.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-lance.obj `if test -f 'lance.c'; then $(CYGPATH_W) 'lance.c'; else $(CYGPATH_W) '$(srcdir)/lance.c'; fi`
+-
+ libdrivers_a-natsemi.o: natsemi.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-natsemi.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-natsemi.Tpo" -c -o libdrivers_a-natsemi.o `test -f 'natsemi.c' || echo '$(srcdir)/'`natsemi.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo" "$(DEPDIR)/libdrivers_a-natsemi.Po"; else rm -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='natsemi.c' object='libdrivers_a-natsemi.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-natsemi.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-natsemi.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-natsemi.o `test -f 'natsemi.c' || echo '$(srcdir)/'`natsemi.c
+ 
+ libdrivers_a-natsemi.obj: natsemi.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-natsemi.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-natsemi.Tpo" -c -o libdrivers_a-natsemi.obj `if test -f 'natsemi.c'; then $(CYGPATH_W) 'natsemi.c'; else $(CYGPATH_W) '$(srcdir)/natsemi.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo" "$(DEPDIR)/libdrivers_a-natsemi.Po"; else rm -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='natsemi.c' object='libdrivers_a-natsemi.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-natsemi.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-natsemi.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-natsemi.obj `if test -f 'natsemi.c'; then $(CYGPATH_W) 'natsemi.c'; else $(CYGPATH_W) '$(srcdir)/natsemi.c'; fi`
+ 
+-libdrivers_a-ni5010.o: ni5010.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ni5010.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ni5010.Tpo" -c -o libdrivers_a-ni5010.o `test -f 'ni5010.c' || echo '$(srcdir)/'`ni5010.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo" "$(DEPDIR)/libdrivers_a-ni5010.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ni5010.c' object='libdrivers_a-ni5010.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ni5010.o `test -f 'ni5010.c' || echo '$(srcdir)/'`ni5010.c
+-
+-libdrivers_a-ni5010.obj: ni5010.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ni5010.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ni5010.Tpo" -c -o libdrivers_a-ni5010.obj `if test -f 'ni5010.c'; then $(CYGPATH_W) 'ni5010.c'; else $(CYGPATH_W) '$(srcdir)/ni5010.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo" "$(DEPDIR)/libdrivers_a-ni5010.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ni5010.c' object='libdrivers_a-ni5010.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ni5010.obj `if test -f 'ni5010.c'; then $(CYGPATH_W) 'ni5010.c'; else $(CYGPATH_W) '$(srcdir)/ni5010.c'; fi`
+-
+ libdrivers_a-ns8390.o: ns8390.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns8390.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns8390.Tpo" -c -o libdrivers_a-ns8390.o `test -f 'ns8390.c' || echo '$(srcdir)/'`ns8390.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo" "$(DEPDIR)/libdrivers_a-ns8390.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ns8390.c' object='libdrivers_a-ns8390.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-ns8390.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-ns8390.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns8390.o `test -f 'ns8390.c' || echo '$(srcdir)/'`ns8390.c
+ 
+ libdrivers_a-ns8390.obj: ns8390.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns8390.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns8390.Tpo" -c -o libdrivers_a-ns8390.obj `if test -f 'ns8390.c'; then $(CYGPATH_W) 'ns8390.c'; else $(CYGPATH_W) '$(srcdir)/ns8390.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo" "$(DEPDIR)/libdrivers_a-ns8390.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ns8390.c' object='libdrivers_a-ns8390.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-ns8390.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-ns8390.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns8390.obj `if test -f 'ns8390.c'; then $(CYGPATH_W) 'ns8390.c'; else $(CYGPATH_W) '$(srcdir)/ns8390.c'; fi`
+ 
+-libdrivers_a-otulip.o: otulip.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-otulip.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-otulip.Tpo" -c -o libdrivers_a-otulip.o `test -f 'otulip.c' || echo '$(srcdir)/'`otulip.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-otulip.Tpo" "$(DEPDIR)/libdrivers_a-otulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-otulip.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='otulip.c' object='libdrivers_a-otulip.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-otulip.o `test -f 'otulip.c' || echo '$(srcdir)/'`otulip.c
+-
+-libdrivers_a-otulip.obj: otulip.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-otulip.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-otulip.Tpo" -c -o libdrivers_a-otulip.obj `if test -f 'otulip.c'; then $(CYGPATH_W) 'otulip.c'; else $(CYGPATH_W) '$(srcdir)/otulip.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-otulip.Tpo" "$(DEPDIR)/libdrivers_a-otulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-otulip.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='otulip.c' object='libdrivers_a-otulip.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-otulip.obj `if test -f 'otulip.c'; then $(CYGPATH_W) 'otulip.c'; else $(CYGPATH_W) '$(srcdir)/otulip.c'; fi`
++libdrivers_a-pcnet32.o: pcnet32.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pcnet32.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pcnet32.Tpo" -c -o libdrivers_a-pcnet32.o `test -f 'pcnet32.c' || echo '$(srcdir)/'`pcnet32.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pcnet32.Tpo" "$(DEPDIR)/libdrivers_a-pcnet32.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pcnet32.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pcnet32.c' object='libdrivers_a-pcnet32.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pcnet32.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pcnet32.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pcnet32.o `test -f 'pcnet32.c' || echo '$(srcdir)/'`pcnet32.c
++
++libdrivers_a-pcnet32.obj: pcnet32.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pcnet32.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pcnet32.Tpo" -c -o libdrivers_a-pcnet32.obj `if test -f 'pcnet32.c'; then $(CYGPATH_W) 'pcnet32.c'; else $(CYGPATH_W) '$(srcdir)/pcnet32.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pcnet32.Tpo" "$(DEPDIR)/libdrivers_a-pcnet32.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pcnet32.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pcnet32.c' object='libdrivers_a-pcnet32.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pcnet32.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pcnet32.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pcnet32.obj `if test -f 'pcnet32.c'; then $(CYGPATH_W) 'pcnet32.c'; else $(CYGPATH_W) '$(srcdir)/pcnet32.c'; fi`
+ 
+ libdrivers_a-rtl8139.o: rtl8139.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-rtl8139.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" -c -o libdrivers_a-rtl8139.o `test -f 'rtl8139.c' || echo '$(srcdir)/'`rtl8139.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" "$(DEPDIR)/libdrivers_a-rtl8139.Po"; else rm -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='rtl8139.c' object='libdrivers_a-rtl8139.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-rtl8139.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-rtl8139.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-rtl8139.o `test -f 'rtl8139.c' || echo '$(srcdir)/'`rtl8139.c
+ 
+ libdrivers_a-rtl8139.obj: rtl8139.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-rtl8139.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" -c -o libdrivers_a-rtl8139.obj `if test -f 'rtl8139.c'; then $(CYGPATH_W) 'rtl8139.c'; else $(CYGPATH_W) '$(srcdir)/rtl8139.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" "$(DEPDIR)/libdrivers_a-rtl8139.Po"; else rm -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='rtl8139.c' object='libdrivers_a-rtl8139.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-rtl8139.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-rtl8139.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-rtl8139.obj `if test -f 'rtl8139.c'; then $(CYGPATH_W) 'rtl8139.c'; else $(CYGPATH_W) '$(srcdir)/rtl8139.c'; fi`
+ 
+ libdrivers_a-sis900.o: sis900.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sis900.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-sis900.Tpo" -c -o libdrivers_a-sis900.o `test -f 'sis900.c' || echo '$(srcdir)/'`sis900.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-sis900.Tpo" "$(DEPDIR)/libdrivers_a-sis900.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sis900.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='sis900.c' object='libdrivers_a-sis900.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-sis900.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-sis900.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sis900.o `test -f 'sis900.c' || echo '$(srcdir)/'`sis900.c
+ 
+ libdrivers_a-sis900.obj: sis900.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sis900.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-sis900.Tpo" -c -o libdrivers_a-sis900.obj `if test -f 'sis900.c'; then $(CYGPATH_W) 'sis900.c'; else $(CYGPATH_W) '$(srcdir)/sis900.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-sis900.Tpo" "$(DEPDIR)/libdrivers_a-sis900.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sis900.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='sis900.c' object='libdrivers_a-sis900.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-sis900.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-sis900.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sis900.obj `if test -f 'sis900.c'; then $(CYGPATH_W) 'sis900.c'; else $(CYGPATH_W) '$(srcdir)/sis900.c'; fi`
+ 
+-libdrivers_a-sk_g16.o: sk_g16.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sk_g16.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" -c -o libdrivers_a-sk_g16.o `test -f 'sk_g16.c' || echo '$(srcdir)/'`sk_g16.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" "$(DEPDIR)/libdrivers_a-sk_g16.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='sk_g16.c' object='libdrivers_a-sk_g16.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sk_g16.o `test -f 'sk_g16.c' || echo '$(srcdir)/'`sk_g16.c
+-
+-libdrivers_a-sk_g16.obj: sk_g16.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sk_g16.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" -c -o libdrivers_a-sk_g16.obj `if test -f 'sk_g16.c'; then $(CYGPATH_W) 'sk_g16.c'; else $(CYGPATH_W) '$(srcdir)/sk_g16.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" "$(DEPDIR)/libdrivers_a-sk_g16.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='sk_g16.c' object='libdrivers_a-sk_g16.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sk_g16.obj `if test -f 'sk_g16.c'; then $(CYGPATH_W) 'sk_g16.c'; else $(CYGPATH_W) '$(srcdir)/sk_g16.c'; fi`
+-
+-libdrivers_a-smc9000.o: smc9000.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-smc9000.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-smc9000.Tpo" -c -o libdrivers_a-smc9000.o `test -f 'smc9000.c' || echo '$(srcdir)/'`smc9000.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo" "$(DEPDIR)/libdrivers_a-smc9000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='smc9000.c' object='libdrivers_a-smc9000.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-smc9000.o `test -f 'smc9000.c' || echo '$(srcdir)/'`smc9000.c
+-
+-libdrivers_a-smc9000.obj: smc9000.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-smc9000.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-smc9000.Tpo" -c -o libdrivers_a-smc9000.obj `if test -f 'smc9000.c'; then $(CYGPATH_W) 'smc9000.c'; else $(CYGPATH_W) '$(srcdir)/smc9000.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo" "$(DEPDIR)/libdrivers_a-smc9000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='smc9000.c' object='libdrivers_a-smc9000.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-smc9000.obj `if test -f 'smc9000.c'; then $(CYGPATH_W) 'smc9000.c'; else $(CYGPATH_W) '$(srcdir)/smc9000.c'; fi`
+-
+-libdrivers_a-tiara.o: tiara.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tiara.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tiara.Tpo" -c -o libdrivers_a-tiara.o `test -f 'tiara.c' || echo '$(srcdir)/'`tiara.c; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tiara.Tpo" "$(DEPDIR)/libdrivers_a-tiara.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tiara.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tiara.c' object='libdrivers_a-tiara.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tiara.o `test -f 'tiara.c' || echo '$(srcdir)/'`tiara.c
+-
+-libdrivers_a-tiara.obj: tiara.c
+-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tiara.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tiara.Tpo" -c -o libdrivers_a-tiara.obj `if test -f 'tiara.c'; then $(CYGPATH_W) 'tiara.c'; else $(CYGPATH_W) '$(srcdir)/tiara.c'; fi`; \
+-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tiara.Tpo" "$(DEPDIR)/libdrivers_a-tiara.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tiara.Tpo"; exit 1; fi
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tiara.c' object='libdrivers_a-tiara.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tiara.obj `if test -f 'tiara.c'; then $(CYGPATH_W) 'tiara.c'; else $(CYGPATH_W) '$(srcdir)/tiara.c'; fi`
++libdrivers_a-tg3.o: tg3.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tg3.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tg3.Tpo" -c -o libdrivers_a-tg3.o `test -f 'tg3.c' || echo '$(srcdir)/'`tg3.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tg3.Tpo" "$(DEPDIR)/libdrivers_a-tg3.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tg3.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tg3.c' object='libdrivers_a-tg3.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-tg3.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-tg3.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tg3.o `test -f 'tg3.c' || echo '$(srcdir)/'`tg3.c
++
++libdrivers_a-tg3.obj: tg3.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tg3.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tg3.Tpo" -c -o libdrivers_a-tg3.obj `if test -f 'tg3.c'; then $(CYGPATH_W) 'tg3.c'; else $(CYGPATH_W) '$(srcdir)/tg3.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tg3.Tpo" "$(DEPDIR)/libdrivers_a-tg3.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tg3.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tg3.c' object='libdrivers_a-tg3.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-tg3.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-tg3.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tg3.obj `if test -f 'tg3.c'; then $(CYGPATH_W) 'tg3.c'; else $(CYGPATH_W) '$(srcdir)/tg3.c'; fi`
+ 
+ libdrivers_a-tlan.o: tlan.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tlan.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tlan.Tpo" -c -o libdrivers_a-tlan.o `test -f 'tlan.c' || echo '$(srcdir)/'`tlan.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tlan.Tpo" "$(DEPDIR)/libdrivers_a-tlan.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tlan.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tlan.c' object='libdrivers_a-tlan.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-tlan.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-tlan.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tlan.o `test -f 'tlan.c' || echo '$(srcdir)/'`tlan.c
+ 
+ libdrivers_a-tlan.obj: tlan.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tlan.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tlan.Tpo" -c -o libdrivers_a-tlan.obj `if test -f 'tlan.c'; then $(CYGPATH_W) 'tlan.c'; else $(CYGPATH_W) '$(srcdir)/tlan.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tlan.Tpo" "$(DEPDIR)/libdrivers_a-tlan.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tlan.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tlan.c' object='libdrivers_a-tlan.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-tlan.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-tlan.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tlan.obj `if test -f 'tlan.c'; then $(CYGPATH_W) 'tlan.c'; else $(CYGPATH_W) '$(srcdir)/tlan.c'; fi`
+ 
+ libdrivers_a-tulip.o: tulip.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tulip.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tulip.Tpo" -c -o libdrivers_a-tulip.o `test -f 'tulip.c' || echo '$(srcdir)/'`tulip.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tulip.Tpo" "$(DEPDIR)/libdrivers_a-tulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tulip.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tulip.c' object='libdrivers_a-tulip.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-tulip.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-tulip.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tulip.o `test -f 'tulip.c' || echo '$(srcdir)/'`tulip.c
+ 
+ libdrivers_a-tulip.obj: tulip.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tulip.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tulip.Tpo" -c -o libdrivers_a-tulip.obj `if test -f 'tulip.c'; then $(CYGPATH_W) 'tulip.c'; else $(CYGPATH_W) '$(srcdir)/tulip.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-tulip.Tpo" "$(DEPDIR)/libdrivers_a-tulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tulip.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tulip.c' object='libdrivers_a-tulip.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-tulip.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-tulip.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tulip.obj `if test -f 'tulip.c'; then $(CYGPATH_W) 'tulip.c'; else $(CYGPATH_W) '$(srcdir)/tulip.c'; fi`
+ 
+ libdrivers_a-via-rhine.o: via-rhine.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-via-rhine.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" -c -o libdrivers_a-via-rhine.o `test -f 'via-rhine.c' || echo '$(srcdir)/'`via-rhine.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" "$(DEPDIR)/libdrivers_a-via-rhine.Po"; else rm -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='via-rhine.c' object='libdrivers_a-via-rhine.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-via-rhine.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-via-rhine.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-via-rhine.o `test -f 'via-rhine.c' || echo '$(srcdir)/'`via-rhine.c
+ 
+ libdrivers_a-via-rhine.obj: via-rhine.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-via-rhine.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" -c -o libdrivers_a-via-rhine.obj `if test -f 'via-rhine.c'; then $(CYGPATH_W) 'via-rhine.c'; else $(CYGPATH_W) '$(srcdir)/via-rhine.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" "$(DEPDIR)/libdrivers_a-via-rhine.Po"; else rm -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='via-rhine.c' object='libdrivers_a-via-rhine.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-via-rhine.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-via-rhine.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-via-rhine.obj `if test -f 'via-rhine.c'; then $(CYGPATH_W) 'via-rhine.c'; else $(CYGPATH_W) '$(srcdir)/via-rhine.c'; fi`
+ 
+ libdrivers_a-w89c840.o: w89c840.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-w89c840.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-w89c840.Tpo" -c -o libdrivers_a-w89c840.o `test -f 'w89c840.c' || echo '$(srcdir)/'`w89c840.c; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo" "$(DEPDIR)/libdrivers_a-w89c840.Po"; else rm -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='w89c840.c' object='libdrivers_a-w89c840.o' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-w89c840.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-w89c840.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-w89c840.o `test -f 'w89c840.c' || echo '$(srcdir)/'`w89c840.c
+ 
+ libdrivers_a-w89c840.obj: w89c840.c
+ @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-w89c840.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-w89c840.Tpo" -c -o libdrivers_a-w89c840.obj `if test -f 'w89c840.c'; then $(CYGPATH_W) 'w89c840.c'; else $(CYGPATH_W) '$(srcdir)/w89c840.c'; fi`; \
+ @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo" "$(DEPDIR)/libdrivers_a-w89c840.Po"; else rm -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='w89c840.c' object='libdrivers_a-w89c840.obj' libtool=no @AMDEPBACKSLASH@
+-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-w89c840.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-w89c840.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-w89c840.obj `if test -f 'w89c840.c'; then $(CYGPATH_W) 'w89c840.c'; else $(CYGPATH_W) '$(srcdir)/w89c840.c'; fi`
+-uninstall-info-am:
++
++libdrivers_a-r8169.o: r8169.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-r8169.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-r8169.Tpo" -c -o libdrivers_a-r8169.o `test -f 'r8169.c' || echo '$(srcdir)/'`r8169.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-r8169.Tpo" "$(DEPDIR)/libdrivers_a-r8169.Po"; else rm -f "$(DEPDIR)/libdrivers_a-r8169.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='r8169.c' object='libdrivers_a-r8169.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-r8169.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-r8169.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-r8169.o `test -f 'r8169.c' || echo '$(srcdir)/'`r8169.c
++
++libdrivers_a-r8169.obj: r8169.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-r8169.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-r8169.Tpo" -c -o libdrivers_a-r8169.obj `if test -f 'r8169.c'; then $(CYGPATH_W) 'r8169.c'; else $(CYGPATH_W) '$(srcdir)/r8169.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-r8169.Tpo" "$(DEPDIR)/libdrivers_a-r8169.Po"; else rm -f "$(DEPDIR)/libdrivers_a-r8169.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='r8169.c' object='libdrivers_a-r8169.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-r8169.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-r8169.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-r8169.obj `if test -f 'r8169.c'; then $(CYGPATH_W) 'r8169.c'; else $(CYGPATH_W) '$(srcdir)/r8169.c'; fi`
++
++libdrivers_a-forcedeth.o: forcedeth.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-forcedeth.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-forcedeth.Tpo" -c -o libdrivers_a-forcedeth.o `test -f 'forcedeth.c' || echo '$(srcdir)/'`forcedeth.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-forcedeth.Tpo" "$(DEPDIR)/libdrivers_a-forcedeth.Po"; else rm -f "$(DEPDIR)/libdrivers_a-forcedeth.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='forcedeth.c' object='libdrivers_a-forcedeth.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-forcedeth.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-forcedeth.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-forcedeth.o `test -f 'forcedeth.c' || echo '$(srcdir)/'`forcedeth.c
++
++libdrivers_a-forcedeth.obj: forcedeth.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-forcedeth.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-forcedeth.Tpo" -c -o libdrivers_a-forcedeth.obj `if test -f 'forcedeth.c'; then $(CYGPATH_W) 'forcedeth.c'; else $(CYGPATH_W) '$(srcdir)/forcedeth.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-forcedeth.Tpo" "$(DEPDIR)/libdrivers_a-forcedeth.Po"; else rm -f "$(DEPDIR)/libdrivers_a-forcedeth.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='forcedeth.c' object='libdrivers_a-forcedeth.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-forcedeth.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-forcedeth.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-forcedeth.obj `if test -f 'forcedeth.c'; then $(CYGPATH_W) 'forcedeth.c'; else $(CYGPATH_W) '$(srcdir)/forcedeth.c'; fi`
++
++libdrivers_a-ns83820.o: ns83820.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns83820.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns83820.Tpo" -c -o libdrivers_a-ns83820.o `test -f 'ns83820.c' || echo '$(srcdir)/'`ns83820.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-ns83820.Tpo" "$(DEPDIR)/libdrivers_a-ns83820.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns83820.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ns83820.c' object='libdrivers_a-ns83820.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-ns83820.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-ns83820.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns83820.o `test -f 'ns83820.c' || echo '$(srcdir)/'`ns83820.c
++
++libdrivers_a-ns83820.obj: ns83820.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns83820.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns83820.Tpo" -c -o libdrivers_a-ns83820.obj `if test -f 'ns83820.c'; then $(CYGPATH_W) 'ns83820.c'; else $(CYGPATH_W) '$(srcdir)/ns83820.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-ns83820.Tpo" "$(DEPDIR)/libdrivers_a-ns83820.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns83820.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ns83820.c' object='libdrivers_a-ns83820.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-ns83820.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-ns83820.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns83820.obj `if test -f 'ns83820.c'; then $(CYGPATH_W) 'ns83820.c'; else $(CYGPATH_W) '$(srcdir)/ns83820.c'; fi`
++
++libdrivers_a-pnic.o: pnic.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pnic.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pnic.Tpo" -c -o libdrivers_a-pnic.o `test -f 'pnic.c' || echo '$(srcdir)/'`pnic.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pnic.Tpo" "$(DEPDIR)/libdrivers_a-pnic.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pnic.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pnic.c' object='libdrivers_a-pnic.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pnic.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pnic.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pnic.o `test -f 'pnic.c' || echo '$(srcdir)/'`pnic.c
++
++libdrivers_a-pnic.obj: pnic.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pnic.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pnic.Tpo" -c -o libdrivers_a-pnic.obj `if test -f 'pnic.c'; then $(CYGPATH_W) 'pnic.c'; else $(CYGPATH_W) '$(srcdir)/pnic.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pnic.Tpo" "$(DEPDIR)/libdrivers_a-pnic.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pnic.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pnic.c' object='libdrivers_a-pnic.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pnic.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pnic.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pnic.obj `if test -f 'pnic.c'; then $(CYGPATH_W) 'pnic.c'; else $(CYGPATH_W) '$(srcdir)/pnic.c'; fi`
++
++libdrivers_a-pnic_api.o: pnic_api.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pnic_api.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pnic_api.Tpo" -c -o libdrivers_a-pnic_api.o `test -f 'pnic_api.c' || echo '$(srcdir)/'`pnic_api.c; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pnic_api.Tpo" "$(DEPDIR)/libdrivers_a-pnic_api.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pnic_api.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pnic_api.c' object='libdrivers_a-pnic_api.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pnic_api.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pnic_api.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pnic_api.o `test -f 'pnic_api.c' || echo '$(srcdir)/'`pnic_api.c
++
++libdrivers_a-pnic_api.obj: pnic_api.c
++@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pnic_api.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pnic_api.Tpo" -c -o libdrivers_a-pnic_api.obj `if test -f 'pnic_api.c'; then $(CYGPATH_W) 'pnic_api.c'; else $(CYGPATH_W) '$(srcdir)/pnic_api.c'; fi`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libdrivers_a-pnic_api.Tpo" "$(DEPDIR)/libdrivers_a-pnic_api.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pnic_api.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='pnic_api.c' object='libdrivers_a-pnic_api.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libdrivers_a-pnic_api.Po' tmpdepfile='$(DEPDIR)/libdrivers_a-pnic_api.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pnic_api.obj `if test -f 'pnic_api.c'; then $(CYGPATH_W) 'pnic_api.c'; else $(CYGPATH_W) '$(srcdir)/pnic_api.c'; fi`
+ 
+ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+@@ -817,11 +927,9 @@
+ 	  done | \
+ 	  $(AWK) '    { files[$$0] = 1; } \
+ 	       END { for (i in files) print i; }'`; \
+-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+-	  test -n "$$unique" || unique=$$empty_fix; \
+-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+-	    $$tags $$unique; \
+-	fi
++	test -z "$(ETAGS_ARGS)$$tags$$unique" \
++	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++	     $$tags $$unique
+ ctags: CTAGS
+ CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+ 		$(TAGS_FILES) $(LISP)
+@@ -895,7 +1003,7 @@
+ clean-generic:
+ 
+ distclean-generic:
+-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++	-rm -f $(CONFIG_CLEAN_FILES)
+ 
+ maintainer-clean-generic:
+ 	@echo "This command is intended for maintainers to use"
+@@ -962,10 +1070,10 @@
+ 
+ 
+ # Is it really necessary to specify dependecies explicitly?
+-$(3c509_drivers): 3c509.c 3c509.h
+-$(3c509_drivers): %.o: 3c509.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(3c509_drivers): 3c509.c 3c509.h
++#$(3c509_drivers): %.o: 3c509.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ $(3c595_drivers): 3c595.c 3c595.h
+ $(3c595_drivers): %.o: 3c595.c
+@@ -977,23 +1085,28 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(cs89x0_drivers): cs89x0.c cs89x0.h
+-$(cs89x0_drivers): %.o: cs89x0.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(cs89x0_drivers): cs89x0.c cs89x0.h
++#$(cs89x0_drivers): %.o: cs89x0.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ $(davicom_drivers): davicom.c
+ $(davicom_drivers): %.o: davicom.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(depca_drivers): depca.c
+-$(depca_drivers): %.o: depca.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(depca_drivers): depca.c
++#$(depca_drivers): %.o: depca.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(eepro_drivers): eepro.c
+-$(eepro_drivers): %.o: eepro.c
++#$(eepro_drivers): eepro.c
++#$(eepro_drivers): %.o: eepro.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(e1000_drivers): e1000.c e1000_hw.h
++$(e1000_drivers): %.o: e1000.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+@@ -1007,28 +1120,38 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
++$(forcedeth_drivers): forcedeth.c
++$(forcedeth_drivers): %.o: forcedeth.c
++	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
+ #$(fa311_drivers): fa311.c
+ #$(fa311_drivers): %.o: fa311.c
+ #	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ #	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(i82586_drivers): i82586.c
+-$(i82586_drivers): %.o: i82586.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(i82586_drivers): i82586.c
++#$(i82586_drivers): %.o: i82586.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(lance_drivers): lance.c
+-$(lance_drivers): %.o: lance.c
+-	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+-	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++#$(lance_drivers): lance.c
++#$(lance_drivers): %.o: lance.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+ $(natsemi_drivers): natsemi.c
+ $(natsemi_drivers): %.o: natsemi.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(ni5010_drivers): ni5010.c
+-$(ni5010_drivers): %.o: ni5010.c
++#$(ni5010_drivers): ni5010.c
++#$(ni5010_drivers): %.o: ni5010.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(ns83820_drivers): ns83820.c
++$(ns83820_drivers): %.o: ns83820.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+@@ -1037,41 +1160,62 @@
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(otulip_drivers): otulip.c otulip.h
+-$(otulip_drivers): %.o: otulip.c
++#$(otulip_drivers): otulip.c otulip.h
++#$(otulip_drivers): %.o: otulip.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++$(pcnet32_drivers): pcnet32.c
++$(pcnet32_drivers): %.o: pcnet32.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(rtl8139_drivers): rtl8139.c
+-$(rtl8139_drivers): %.o: rtl8139.c
++$(pnic_drivers): pnic.c
++$(pnic_drivers): %.o: pnic.c pnic_api.h
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(sis900_drivers): sis900.c
+-$(sis900_drivers): %.o: sis900.c sis900.h
++$(rtl8139_drivers): rtl8139.c
++$(rtl8139_drivers): %.o: rtl8139.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(sk_g16_drivers): sk_g16.c sk_g16.h
+-$(sk_g16_drivers): %.o: sk_g16.c
++$(r8169_drivers): r8169.c
++$(r8169_drivers): %.o: r8169.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(smc9000_drivers): smc9000.c smc9000.h
+-$(smc9000_drivers): %.o: smc9000.c
++$(sis900_drivers): sis900.c sis900.h
++$(sis900_drivers): %.o: sis900.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-$(tiara_drivers): tiara.c
+-$(tiara_drivers): %.o: tiara.c
++#$(sk_g16_drivers): sk_g16.c sk_g16.h
++#$(sk_g16_drivers): %.o: sk_g16.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++#$(smc9000_drivers): smc9000.c smc9000.h
++#$(smc9000_drivers): %.o: smc9000.c
++#	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++#	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
++
++$(tg3_drivers): tg3.c tg3.h
++$(tg3_drivers): %.o: tg3.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ 	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
+-#$(tlan_drivers): tlan.c
+-#$(tlan_drivers): %.o: tlan.c
++#$(tiara_drivers): tiara.c
++#$(tiara_drivers): %.o: tiara.c
+ #	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+ #	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
+ 
++$(tlan_drivers): tlan.c tlan.h
++$(tlan_drivers): %.o: tlan.c
++	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
++	  $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $<
++
+ $(tulip_drivers): tulip.c
+ $(tulip_drivers): %.o: tulip.c
+ 	$(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+diff -Naur grub-0.97.orig/netboot/basemem.c grub-0.97/netboot/basemem.c
+--- grub-0.97.orig/netboot/basemem.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/basemem.c	2005-08-31 19:24:28.000000000 +0000
+@@ -0,0 +1,178 @@
++#include "etherboot.h"
++#define DEBUG_BASEMEM
++/* Routines to allocate base memory in a BIOS-compatible way, by
++ * updating the Free Base Memory Size counter at 40:13h.
++ *
++ * Michael Brown <mbrown@fensystems.co.uk> (mcb30)
++ * $Id: grub-0.95-diskless-patch-2-undi.patch,v 1.1.1.1 2005/06/14 08:18:50 wesolows Exp $
++ */
++
++#define fbms ( ( uint16_t * ) phys_to_virt ( 0x413 ) )
++#define BASE_MEMORY_MAX ( 640 )
++#define FREE_BLOCK_MAGIC ( ('!'<<0) + ('F'<<8) + ('R'<<16) + ('E'<<24) )
++
++typedef struct free_base_memory_block {
++	uint32_t	magic;
++	uint16_t	size_kb;
++} free_base_memory_block_t;
++
++/* Return amount of free base memory in bytes
++ */
++
++uint32_t get_free_base_memory ( void ) {
++	return *fbms << 10;
++}
++
++/* Adjust the real mode stack pointer.  We keep the real mode stack at
++ * the top of free base memory, rather than allocating space for it.
++ */
++
++inline void adjust_real_mode_stack ( void ) {
++/*  	real_mode_stack = ( *fbms << 10 ); */
++}
++
++/* Allocate N bytes of base memory.  Amount allocated will be rounded
++ * up to the nearest kB, since that's the granularity of the BIOS FBMS
++ * counter.  Returns NULL if memory cannot be allocated.
++ */
++
++void * allot_base_memory ( size_t size ) {
++	uint16_t size_kb = ( size + 1023 ) >> 10;
++	void *ptr = NULL;
++
++#ifdef DEBUG_BASEMEM
++	printf ( "Trying to allocate %d kB of base memory, %d kB free\n",
++		 size_kb, *fbms );
++#endif
++
++	/* Free up any unused memory before we start */
++	free_unused_base_memory();
++
++	/* Check available base memory */
++	if ( size_kb > *fbms ) { return NULL; }
++
++	/* Reduce available base memory */
++	*fbms -= size_kb;
++
++	/* Calculate address of memory allocated */
++	ptr = phys_to_virt ( *fbms << 10 );
++
++#ifdef DEBUG_BASEMEM
++	/* Zero out memory.  We do this so that allocation of
++	 * already-used space will show up in the form of a crash as
++	 * soon as possible.
++	 */
++	memset ( ptr, 0, size_kb << 10 );
++#endif
++
++	/* Adjust real mode stack pointer */
++	adjust_real_mode_stack ();
++
++	return ptr;
++}
++
++/* Free base memory allocated by allot_base_memory.  The BIOS provides
++ * nothing better than a LIFO mechanism for freeing memory (i.e. it
++ * just has the single "total free memory" counter), but we improve
++ * upon this slightly; as long as you free all the allotted blocks, it
++ * doesn't matter what order you free them in.  (This will only work
++ * for blocks that are freed via forget_base_memory()).
++ *
++ * Yes, it's annoying that you have to remember the size of the blocks
++ * you've allotted.  However, since our granularity of allocation is
++ * 1K, the alternative is to risk wasting the occasional kB of base
++ * memory, which is a Bad Thing.  Really, you should be using as
++ * little base memory as possible, so consider the awkwardness of the
++ * API to be a feature! :-)
++ */
++
++void forget_base_memory ( void *ptr, size_t size ) {
++	uint16_t remainder = virt_to_phys(ptr) & 1023;
++	uint16_t size_kb = ( size + remainder + 1023 ) >> 10;
++	free_base_memory_block_t *free_block =
++		( free_base_memory_block_t * ) ( ptr - remainder );
++	
++	if ( ( ptr == NULL ) || ( size == 0 ) ) { return; }
++
++#ifdef DEBUG_BASEMEM
++	printf ( "Trying to free %d bytes base memory at 0x%x\n",
++		 size, virt_to_phys ( ptr ) );
++	if ( remainder > 0 ) {
++		printf ( "WARNING: destructively expanding free block "
++			 "downwards to 0x%x\n",
++			 virt_to_phys ( ptr - remainder ) );
++	}
++#endif
++
++	/* Mark every kilobyte within this block as free.  This is
++	 * overkill for normal purposes, but helps when something has
++	 * allocated base memory with a granularity finer than the
++	 * BIOS granularity of 1kB.  PXE ROMs tend to do this when
++	 * they allocate their own memory.  This method allows us to
++	 * free their blocks (admittedly in a rather dangerous,
++	 * tread-on-anything-either-side sort of way, but there's no
++	 * other way to do it).
++	 *
++	 * Since we're marking every kB as free, there's actually no
++	 * need for recording the size of the blocks.  However, we
++	 * keep this in so that debug messages are friendlier.  It
++	 * probably adds around 8 bytes to the overall code size.
++	 */
++	while ( size_kb > 0 ) {
++		/* Mark this block as unused */
++		free_block->magic = FREE_BLOCK_MAGIC;
++		free_block->size_kb = size_kb;
++		/* Move up by 1 kB */
++		(void *)(free_block += ( 1 << 10 ));
++		size_kb--;
++	}
++
++	/* Free up unused base memory */
++	free_unused_base_memory();
++}
++
++/* Do the actual freeing of memory.  This is split out from
++ * forget_base_memory() so that it may be called separately.  It
++ * should be called whenever base memory is deallocated by an external
++ * entity (if we can detect that it has done so) so that we get the
++ * chance to free up our own blocks.
++ */
++void free_unused_base_memory ( void ) {
++	free_base_memory_block_t *free_block = NULL;
++
++	/* Try to release memory back to the BIOS.  Free all
++	 * consecutive blocks marked as free.
++	 */
++	while ( 1 ) {
++		/* Calculate address of next potential free block */
++		free_block = ( free_base_memory_block_t * )
++			phys_to_virt ( *fbms << 10 );
++		
++		/* Stop processing if we're all the way up to 640K or
++		 * if this is not a free block
++		 */
++		if ( ( *fbms == BASE_MEMORY_MAX ) ||
++		     ( free_block->magic != FREE_BLOCK_MAGIC ) ) {
++			break;
++		}
++
++		/* Return memory to BIOS */
++		*fbms += free_block->size_kb;
++
++#ifdef DEBUG_BASEMEM
++		printf ( "Freed %d kB base memory, %d kB now free\n",
++			 free_block->size_kb, *fbms );
++		
++		/* Zero out freed block.  We do this in case
++		 * the block contained any structures that
++		 * might be located by scanning through
++		 * memory.
++		 */
++		memset ( free_block, 0, free_block->size_kb << 10 );
++#endif			
++	}
++
++	/* Adjust real mode stack pointer */
++	adjust_real_mode_stack ();
++}
++
+diff -Naur grub-0.97.orig/netboot/big_bswap.h grub-0.97/netboot/big_bswap.h
+--- grub-0.97.orig/netboot/big_bswap.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/big_bswap.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,17 @@
++#ifndef ETHERBOOT_BIG_BSWAP_H
++#define ETHERBOOT_BIG_BSWAP_H
++
++#define ntohl(x) 	(x)
++#define htonl(x) 	(x)
++#define ntohs(x) 	(x)
++#define htons(x) 	(x)
++#define cpu_to_le32(x)	__bswap_32(x)
++#define cpu_to_le16(x)	__bswap_16(x)
++#define cpu_to_be32(x)	(x)
++#define cpu_to_be16(x)	(x)
++#define le32_to_cpu(x)	__bswap_32(x)
++#define le16_to_cpu(x)	__bswap_16(x)
++#define be32_to_cpu(x)	(x)
++#define be16_to_cpu(x)	(x)
++
++#endif /* ETHERBOOT_BIG_BSWAP_H */
+diff -Naur grub-0.97.orig/netboot/bootp.h grub-0.97/netboot/bootp.h
+--- grub-0.97.orig/netboot/bootp.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/bootp.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,182 @@
++#ifndef	_BOOTP_H
++#define	_BOOTP_H
++
++#include "if_ether.h"
++#include "ip.h"
++#include "udp.h"
++
++#ifndef	MAX_BOOTP_RETRIES
++#define MAX_BOOTP_RETRIES	20
++#endif
++
++#ifdef	ALTERNATE_DHCP_PORTS_1067_1068
++#undef	NON_STANDARD_BOOTP_SERVER
++#define	NON_STANDARD_BOOTP_SERVER	1067
++#undef	NON_STANDARD_BOOTP_CLIENT
++#define	NON_STANDARD_BOOTP_CLIENT	1068
++#endif
++
++#ifdef	NON_STANDARD_BOOTP_SERVER
++#define	BOOTP_SERVER	NON_STANDARD_BOOTP_SERVER
++#else
++#define BOOTP_SERVER	67
++#endif
++#ifdef	NON_STANDARD_BOOTP_CLIENT
++#define	BOOTP_CLIENT	NON_STANDARD_BOOTP_CLIENT
++#else
++#define BOOTP_CLIENT	68
++#endif
++
++#define BOOTP_REQUEST	1
++#define BOOTP_REPLY	2
++
++#define TAG_LEN(p)		(*((p)+1))
++#define RFC1533_COOKIE		99, 130, 83, 99
++#define RFC1533_PAD		0
++#define RFC1533_NETMASK		1
++#define RFC1533_TIMEOFFSET	2
++#define RFC1533_GATEWAY		3
++#define RFC1533_TIMESERVER	4
++#define RFC1533_IEN116NS	5
++#define RFC1533_DNS		6
++#define RFC1533_LOGSERVER	7
++#define RFC1533_COOKIESERVER	8
++#define RFC1533_LPRSERVER	9
++#define RFC1533_IMPRESSSERVER	10
++#define RFC1533_RESOURCESERVER	11
++#define RFC1533_HOSTNAME	12
++#define RFC1533_BOOTFILESIZE	13
++#define RFC1533_MERITDUMPFILE	14
++#define RFC1533_DOMAINNAME	15
++#define RFC1533_SWAPSERVER	16
++#define RFC1533_ROOTPATH	17
++#define RFC1533_EXTENSIONPATH	18
++#define RFC1533_IPFORWARDING	19
++#define RFC1533_IPSOURCEROUTING	20
++#define RFC1533_IPPOLICYFILTER	21
++#define RFC1533_IPMAXREASSEMBLY	22
++#define RFC1533_IPTTL		23
++#define RFC1533_IPMTU		24
++#define RFC1533_IPMTUPLATEAU	25
++#define RFC1533_INTMTU		26
++#define RFC1533_INTLOCALSUBNETS	27
++#define RFC1533_INTBROADCAST	28
++#define RFC1533_INTICMPDISCOVER	29
++#define RFC1533_INTICMPRESPOND	30
++#define RFC1533_INTROUTEDISCOVER 31
++#define RFC1533_INTROUTESOLICIT	32
++#define RFC1533_INTSTATICROUTES	33
++#define RFC1533_LLTRAILERENCAP	34
++#define RFC1533_LLARPCACHETMO	35
++#define RFC1533_LLETHERNETENCAP	36
++#define RFC1533_TCPTTL		37
++#define RFC1533_TCPKEEPALIVETMO	38
++#define RFC1533_TCPKEEPALIVEGB	39
++#define RFC1533_NISDOMAIN	40
++#define RFC1533_NISSERVER	41
++#define RFC1533_NTPSERVER	42
++#define RFC1533_VENDOR		43
++#define RFC1533_NBNS		44
++#define RFC1533_NBDD		45
++#define RFC1533_NBNT		46
++#define RFC1533_NBSCOPE		47
++#define RFC1533_XFS		48
++#define RFC1533_XDM		49
++#ifndef	NO_DHCP_SUPPORT
++#define RFC2132_REQ_ADDR	50
++#define RFC2132_MSG_TYPE	53
++#define RFC2132_SRV_ID		54
++#define RFC2132_PARAM_LIST	55
++#define RFC2132_MAX_SIZE	57
++#define	RFC2132_VENDOR_CLASS_ID	60
++
++#define DHCPDISCOVER		1
++#define DHCPOFFER		2
++#define DHCPREQUEST		3
++#define DHCPACK			5
++#endif	/* NO_DHCP_SUPPORT */
++
++#define RFC1533_VENDOR_MAJOR	0
++#define RFC1533_VENDOR_MINOR	0
++
++#define RFC1533_VENDOR_MAGIC	128
++#define RFC1533_VENDOR_ADDPARM	129
++#define	RFC1533_VENDOR_ETHDEV	130
++#ifdef	IMAGE_FREEBSD
++#define RFC1533_VENDOR_HOWTO    132
++#define RFC1533_VENDOR_KERNEL_ENV    133
++#endif
++#define RFC1533_VENDOR_ETHERBOOT_ENCAP 150
++#define RFC1533_VENDOR_MNUOPTS	160
++#define RFC1533_VENDOR_NIC_DEV_ID 175
++#define RFC1533_VENDOR_SELECTION 176
++#define RFC1533_VENDOR_ARCH     177
++#define RFC1533_VENDOR_MOTD	184
++#define RFC1533_VENDOR_NUMOFMOTD 8
++#define RFC1533_VENDOR_IMG	192
++#define RFC1533_VENDOR_NUMOFIMG	16
++
++#define RFC1533_VENDOR_CONFIGFILE 150
++
++#define RFC1533_END		255
++
++#define BOOTP_VENDOR_LEN	64
++
++#define DHCP_OPT_LEN		312
++
++/* Format of a bootp packet */
++struct bootp_t {
++	uint8_t  bp_op;
++	uint8_t  bp_htype;
++	uint8_t  bp_hlen;
++	uint8_t  bp_hops;
++	uint32_t bp_xid;
++	uint16_t bp_secs;
++	uint16_t unused;
++	in_addr bp_ciaddr;
++	in_addr bp_yiaddr;
++	in_addr bp_siaddr;
++	in_addr bp_giaddr;
++	uint8_t  bp_hwaddr[16];
++	uint8_t  bp_sname[64];
++	char     bp_file[128];
++	uint8_t  bp_vend[BOOTP_VENDOR_LEN];
++};
++
++struct dhcp_t {
++	uint8_t  bp_op;
++	uint8_t  bp_htype;
++	uint8_t  bp_hlen;
++	uint8_t  bp_hops;
++	uint32_t bp_xid;
++	uint16_t bp_secs;
++	uint16_t bp_flag;
++	in_addr bp_ciaddr;
++	in_addr bp_yiaddr;
++	in_addr bp_siaddr;
++	in_addr bp_giaddr;
++	uint8_t  bp_hwaddr[16];
++	uint8_t  bp_sname[64];
++	char     bp_file[128];
++	uint8_t  bp_vend[DHCP_OPT_LEN];
++};
++
++/* Format of a bootp IP packet */
++struct bootpip_t
++{
++	struct iphdr ip;
++	struct udphdr udp;
++	struct bootp_t bp;
++};
++struct dhcpip_t
++{
++	struct iphdr ip;
++	struct udphdr udp;
++	struct dhcp_t bp;
++};
++
++#define MAX_RFC1533_VENDLEN (ETH_MAX_MTU - sizeof(struct bootpip_t) + BOOTP_VENDOR_LEN)
++
++#define BOOTP_DATA_ADDR (&bootp_data)
++
++#endif	/* _BOOTP_H */
+diff -Naur grub-0.97.orig/netboot/byteswap.h grub-0.97/netboot/byteswap.h
+--- grub-0.97.orig/netboot/byteswap.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/byteswap.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,20 @@
++#ifndef ETHERBOOT_BYTESWAP_H
++#define ETHERBOOT_BYTESWAP_H
++
++#include "endian.h"
++#include "i386_byteswap.h"
++
++#if __BYTE_ORDER == __LITTLE_ENDIAN
++#include "little_bswap.h"
++#endif
++#if __BYTE_ORDER == __BIG_ENDIAN
++#include "big_bswap.h"
++#endif
++
++/* Make routines available to all */
++#define swap32(x)	__bswap_32(x)
++#define swap16(x)	__bswap_16(x)
++#define bswap_32(x)	__bswap_32(x)
++#define bswap_16(x)	__bswap_16(x)
++	
++#endif /* ETHERBOOT_BYTESWAP_H */
+diff -Naur grub-0.97.orig/netboot/cards.h grub-0.97/netboot/cards.h
+--- grub-0.97.orig/netboot/cards.h	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/cards.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,183 +0,0 @@
+-#ifndef	CARDS_H
+-#define CARDS_H
+-
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+-#include "nic.h"
+-
+-/* OK, this is how the PCI support hack works:  if pci.h is included before
+- * this file is included, assume that the driver supports PCI.  This means that
+- * this file is usually included last.  */
+-
+-#ifdef	PCI_H
+-#define PCI_ARG(x) ,x
+-#else
+-#define PCI_ARG(x)
+-#endif
+-
+-#ifdef	INCLUDE_WD
+-extern struct nic	*wd_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_3C503
+-extern struct nic	*t503_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_VIA_RHINE
+-extern struct nic	*rhine_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NE
+-extern struct nic	*ne_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NS8390
+-extern struct nic	*nepci_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_3C509
+-extern struct nic	*t509_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_3C529
+-extern struct nic	*t529_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_3C595
+-extern struct nic	*t595_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_3C90X
+-extern struct nic	*a3c90x_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_EEPRO
+-extern struct nic	*eepro_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_EEPRO100
+-extern struct nic	*eepro100_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_EPIC100
+-extern struct nic	*epic100_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_OTULIP
+-extern struct nic	*otulip_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_TULIP
+-extern struct nic	*tulip_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_DAVICOM
+-extern struct nic	*davicom_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_CS89X0
+-extern struct nic	*cs89x0_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_LANCE
+-extern struct nic	*lancepci_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NE2100
+-extern struct nic	*ne2100_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NI6510
+-extern struct nic	*ni6510_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_SK_G16
+-extern struct nic	*SK_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_3C507
+-extern struct nic	*t507_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NI5010
+-extern struct nic	*ni5010_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NI5210
+-extern struct nic	*ni5210_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_EXOS205
+-extern struct nic	*exos205_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_SMC9000
+-extern struct nic	*smc9000_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_TIARA
+-extern struct nic	*tiara_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_DEPCA
+-extern struct nic	*depca_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_RTL8139
+-extern struct nic	*rtl8139_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_W89C840
+-extern struct nic	*w89c840_probe(struct nic *, unsigned short *
+-	PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_SIS900
+-extern struct nic	*sis900_probe(struct nic *, unsigned short *
+-        PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_NATSEMI
+-extern struct nic	*natsemi_probe(struct nic *, unsigned short *
+-        PCI_ARG(struct pci_device *));
+-#endif
+-
+-#ifdef	INCLUDE_TLAN
+-extern struct nic	*tlan_probe(struct nic *, unsigned short *
+-        PCI_ARG(struct pci_device *));
+-#endif
+-
+-#endif	/* CARDS_H */
+diff -Naur grub-0.97.orig/netboot/config.c grub-0.97/netboot/config.c
+--- grub-0.97.orig/netboot/config.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/config.c	2005-08-31 19:03:35.000000000 +0000
+@@ -1,598 +1,165 @@
+ /*
+- *  GRUB  --  GRand Unified Bootloader
+- *  Copyright (C) 2001,2002  Free Software Foundation, Inc.
+- *
+- *  This program is free software; you can redistribute it and/or modify
+- *  it under the terms of the GNU General Public License as published by
+- *  the Free Software Foundation; either version 2 of the License, or
+- *  (at your option) any later version.
+- *
+- *  This program is distributed in the hope that it will be useful,
+- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- *  GNU General Public License for more details.
+- *
+- *  You should have received a copy of the GNU General Public License
+- *  along with this program; if not, write to the Free Software
+- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+- */
+-
+-/* Based on "src/config.c" in etherboot-5.0.5.  */
+-
+-/*
+  * This program is free software; you can redistribute it and/or
+  * modify it under the terms of the GNU General Public License as
+  * published by the Free Software Foundation; either version 2, or (at
+  * your option) any later version.
+  */
+ 
+-#define GRUB	1
+-#include <etherboot.h>
+-#include <nic.h>
++#include	"grub.h"
++#include	"pci.h"
++#include	"isa.h"
++#include	"nic.h"
+ 
+-#undef	INCLUDE_PCI
+-#if	defined(INCLUDE_NS8390) || defined(INCLUDE_EEPRO100) || defined(INCLUDE_LANCE) || defined(INCLUDE_EPIC100) || defined(INCLUDE_TULIP) || defined(INCLUDE_OTULIP) || defined(INCLUDE_3C90X) ||  defined(INCLUDE_3C595) || defined(INCLUDE_RTL8139) || defined(INCLUDE_VIA_RHINE) || defined(INCLUDE_W89C840) || defined(INCLUDE_DAVICOM) || defined(INCLUDE_SIS900) || defined(INCLUDE_NATSEMI) || defined(INCLUDE_TLAN)
+-	/* || others later */
+-# define INCLUDE_PCI
+-# include <pci.h>
+-static unsigned short pci_ioaddrs[16];
+-
+-static struct pci_device pci_nic_list[] =
++#ifdef CONFIG_PCI
++static int pci_probe(struct dev *dev, const char *type_name)
+ {
+-#ifdef	INCLUDE_NS8390
+-  { PCI_VENDOR_ID_REALTEK,	PCI_DEVICE_ID_REALTEK_8029,
+-    "Realtek 8029", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_WINBOND2,	PCI_DEVICE_ID_WINBOND2_89C940,
+-    "Winbond NE2000-PCI", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_COMPEX,	PCI_DEVICE_ID_COMPEX_RL2000,
+-    "Compex ReadyLink 2000", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_KTI,		PCI_DEVICE_ID_KTI_ET32P2,
+-    "KTI ET32P2", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_NETVIN,	PCI_DEVICE_ID_NETVIN_NV5000SC,
+-    "NetVin NV5000SC", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_HOLTEK,	PCI_DEVICE_ID_HOLTEK_HT80232,
+-    "Holtek HT80232", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_3C90X
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C900TPO,
+-    "3Com900-TPO", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C900COMBO,
+-    "3Com900-Combo", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C905TX,
+-    "3Com905-TX", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C905T4,
+-    "3Com905-T4", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9004,
+-    "3Com900B-TPO", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9005,
+-    "3Com900B-Combo", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9006,
+-    "3Com900B-2/T", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x900A,
+-    "3Com900B-FL", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C905B_TX,
+-    "3Com905B-TX", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9056,
+-    "3Com905B-T4", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x905A,
+-    "3Com905B-FL", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C905C_TXM,
+-    "3Com905C-TXM", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9800,
+-    "3Com980-Cyclone", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9805,
+-    "3Com9805", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x7646,
+-    "3CSOHO100-TX", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_3C595
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C590,
+-    "3Com590", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C595,
+-    "3Com595", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C595_1,
+-    "3Com595", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C595_2,
+-    "3Com595", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C900TPO,
+-    "3Com900-TPO", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		PCI_DEVICE_ID_3COM_3C900COMBO,
+-    "3Com900-Combo", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9004,
+-    "3Com900B-TPO", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9005,
+-    "3Com900B-Combo", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9006,
+-    "3Com900B-2/T", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x900A,
+-    "3Com900B-FL", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9800,
+-    "3Com980-Cyclone", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x9805,
+-    "3Com9805", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_3COM,		0x7646,
+-    "3CSOHO100-TX", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_EEPRO100
+-  { PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82557,
+-    "Intel EtherExpressPro100", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82559ER,
+-    "Intel EtherExpressPro100 82559ER", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ID1029,
+-    "Intel EtherExpressPro100 ID1029", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ID1030,
+-    "Intel Corporation 82559 InBusiness 10/100", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82562,
+-    "Intel EtherExpressPro100 82562EM", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_EPIC100
+-  { PCI_VENDOR_ID_SMC,		PCI_DEVICE_ID_SMC_EPIC100,
+-    "SMC EtherPowerII", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_LANCE
+-  { PCI_VENDOR_ID_AMD,		PCI_DEVICE_ID_AMD_LANCE,
+-    "AMD Lance/PCI", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_AMD_HOMEPNA,	PCI_DEVICE_ID_AMD_HOMEPNA,
+-    "AMD Lance/HomePNA", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_RTL8139
+-  { PCI_VENDOR_ID_REALTEK,	PCI_DEVICE_ID_REALTEK_8139,
+-    "Realtek 8139", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DLINK,	PCI_DEVICE_ID_DFE530TXP,
+-    "DFE530TX+/DFE538TX", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_SMC_1211,	PCI_DEVICE_ID_SMC_1211,
+-    "SMC EZ10/100", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_OTULIP
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_TULIP,
+-    "Digital Tulip", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_TULIP_FAST,
+-    "Digital Tulip Fast", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_TULIP_PLUS,
+-    "Digital Tulip+", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_21142,
+-    "Digital Tulip 21142", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_TULIP
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_TULIP,
+-    "Digital Tulip", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_TULIP_FAST,
+-    "Digital Tulip Fast", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_TULIP_PLUS,
+-    "Digital Tulip+", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DEC,		PCI_DEVICE_ID_DEC_21142,
+-    "Digital Tulip 21142", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_MACRONIX,	PCI_DEVICE_ID_MX987x5,
+-    "Macronix MX987x5", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_LINKSYS,	PCI_DEVICE_ID_LC82C115,
+-    "LinkSys LNE100TX", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_LINKSYS,	PCI_DEVICE_ID_DEC_TULIP,
+-    "Netgear FA310TX", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DAVICOM,	PCI_DEVICE_ID_DM9102,
+-    "Davicom 9102", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DAVICOM,	PCI_DEVICE_ID_DM9009,
+-    "Davicom 9009", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_ADMTEK,	PCI_DEVICE_ID_ADMTEK_0985,
+-    "ADMtek Centaur-P", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_ADMTEK,	0x0981,
+-    "ADMtek AN981 Comet", 0, 0, 0, 0},
+-  { 0x125B,			0x1400,
+-    "ASIX AX88140", 0, 0, 0, 0 },
+-  { 0x11F6,			0x9881,
+-    "Compex RL100-TX", 0, 0, 0, 0 },
+-#endif
+-#ifdef	INCLUDE_DAVICOM
+-  { PCI_VENDOR_ID_DAVICOM,	PCI_DEVICE_ID_DM9102,
+-    "Davicom 9102", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_DAVICOM,	PCI_DEVICE_ID_DM9009,
+-    "Davicom 9009", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_VIA_RHINE
+-  { PCI_VENDOR_ID_VIATEC,	PCI_DEVICE_ID_VIA_VT6102,
+-    "VIA 6102", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_VIATEC,	PCI_DEVICE_ID_VIA_RHINE_I,
+-    "VIA 3043", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_VIATEC,	PCI_DEVICE_ID_VIA_86C100A,
+-    "VIA 86C100A", 0, 0, 0, 0},
+-#endif
+-#ifdef	INCLUDE_W89C840
+-  { PCI_VENDOR_ID_WINBOND2,	PCI_DEVICE_ID_WINBOND2_89C840,
+-    "Winbond W89C840F", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_COMPEX,	PCI_DEVICE_ID_COMPEX_RL100ATX,
+-    "Compex RL100ATX", 0, 0, 0, 0},
+-#endif
+-#ifdef INCLUDE_SIS900
+-  { PCI_VENDOR_ID_SIS,     	PCI_DEVICE_ID_SIS900,
+-    "SIS900", 0, 0, 0, 0},
+-  { PCI_VENDOR_ID_SIS,     	PCI_DEVICE_ID_SIS7016,
+-    "SIS7016", 0, 0, 0, 0},
+-#endif
+-  
+-#ifdef INCLUDE_NATSEMI
+-  { PCI_VENDOR_ID_NS,	     	PCI_DEVICE_ID_DP83815,
+-    "DP83815", 0, 0, 0, 0},
+-#endif
+-  
+-#ifdef INCLUDE_TLAN
+-  { PCI_VENDOR_ID_OLICOM,	PCI_DEVICE_ID_OLICOM_OC2326,
+-    "OC2326", 0, 0, 0, 0},
++/*
++ *	NIC probing is in pci device order, followed by the 
++ *      link order of the drivers.  A driver that matches 
++ *      on vendor and device id will supersede a driver
++ *      that matches on pci class.
++ *
++ *	If you want to probe for another device behind the same pci
++ *      device just increment index.  And the previous probe call
++ *      will be repeated.
++ */
++	struct pci_probe_state *state = &dev->state.pci;
++	printf("Probing pci %s...\n", type_name);
++	if (dev->how_probe == PROBE_FIRST) {
++		state->advance    = 1;
++		state->dev.driver = 0;
++		state->dev.bus    = 0;
++		state->dev.devfn  = 0;
++		dev->index        = -1;
++	}
++	for(;;) {
++		if ((dev->how_probe != PROBE_AWAKE) && state->advance) {
++			find_pci(dev->type, &state->dev);
++			dev->index = -1;
++		}
++		state->advance = 1;
++		
++		if (state->dev.driver == 0)
++			break;
++		
++#if 0
++		/* FIXME the romaddr code needs a total rethought to be useful */
++		if (state->dev.romaddr != ((unsigned long) rom.rom_segment << 4)) {
++			continue;
++		}
++#endif
++		if (dev->how_probe != PROBE_AWAKE) {
++			dev->type_index++;
++		}
++		dev->devid.bus_type = PCI_BUS_TYPE;
++		dev->devid.vendor_id = htons(state->dev.vendor);
++		dev->devid.device_id = htons(state->dev.dev_id);
++		/* FIXME how do I handle dev->index + PROBE_AGAIN?? */
++		
++		printf("[%s]", state->dev.name);
++		if (state->dev.driver->probe(dev, &state->dev)) {
++			state->advance = (dev->index == -1);
++			return PROBE_WORKED;
++		}
++		putchar('\n');
++	}
++	return PROBE_FAILED;
++}
+ #endif
+ 
+-  /* other PCI NICs go here */
+-  {0, 0, NULL, 0, 0, 0, 0}
+-};
+-#endif	/* INCLUDE_*PCI */
+-
+-#include <cards.h>
+-
+-#ifdef INCLUDE_PCI
+-struct pci_dispatch_table
++#ifdef CONFIG_ISA
++static int isa_probe(struct dev *dev, const char *type_name)
+ {
+-  unsigned short vendor;
+-  unsigned short dev_id;
+-  struct nic *(*eth_probe) (struct nic *, unsigned short *,
+-			    struct pci_device *);
+-};
+-
+-static struct pci_dispatch_table PCI_NIC[] =
+-{
+-# ifdef INCLUDE_NS8390
+-  { PCI_VENDOR_ID_REALTEK,  PCI_DEVICE_ID_REALTEK_8029,    nepci_probe },
+-  { PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940, nepci_probe },
+-  { PCI_VENDOR_ID_COMPEX,   PCI_DEVICE_ID_COMPEX_RL2000,   nepci_probe },
+-  { PCI_VENDOR_ID_KTI,      PCI_DEVICE_ID_KTI_ET32P2,      nepci_probe },
+-  { PCI_VENDOR_ID_NETVIN,   PCI_DEVICE_ID_NETVIN_NV5000SC, nepci_probe },
+-  { PCI_VENDOR_ID_HOLTEK,   PCI_DEVICE_ID_HOLTEK_HT80232,  nepci_probe },
+-# endif /* INCLUDE_NS8390 */
+-# ifdef INCLUDE_3C90X
+-  { PCI_VENDOR_ID_3COM,	    PCI_DEVICE_ID_3COM_3C900TPO,   a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C900COMBO, a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C905TX,    a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C905T4,    a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9004,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9005,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9006,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x900A,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C905B_TX,  a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9056,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x905A,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C905C_TXM, a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9800,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9805,                        a3c90x_probe },
+-  { PCI_VENDOR_ID_3COM,     0x7646,                        a3c90x_probe },
+-# endif /* INCLUDE_3C90X */
+-# ifdef	INCLUDE_3C595
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C590,      t595_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C595,      t595_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C595_1,    t595_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C595_2,    t595_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C900TPO,   t595_probe },
+-  { PCI_VENDOR_ID_3COM,     PCI_DEVICE_ID_3COM_3C900COMBO, t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9004,                        t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9005,                        t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9006,                        t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x900A,                        t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9800,                        t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x9805,                        t595_probe },
+-  { PCI_VENDOR_ID_3COM,     0x7646,                        t595_probe },
+-# endif /* INCLUDE_3C595 */
+-# ifdef	INCLUDE_EEPRO100
+-  { PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82557,     eepro100_probe },
+-  { PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82559ER,   eepro100_probe },
+-  { PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_ID1029,    eepro100_probe },
+-  { PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_ID1030,    eepro100_probe },
+-  { PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82562,     eepro100_probe },
+-# endif /* INCLUDE_EEPRO100 */
+-# ifdef	INCLUDE_EPIC100
+-  { PCI_VENDOR_ID_SMC,      PCI_DEVICE_ID_SMC_EPIC100,     epic100_probe },
+-# endif /* INCLUDE_EPIC100 */
+-# ifdef	INCLUDE_LANCE
+-  { PCI_VENDOR_ID_AMD,      PCI_DEVICE_ID_AMD_LANCE,       lancepci_probe },
+-  { PCI_VENDOR_ID_AMD_HOMEPNA, PCI_DEVICE_ID_AMD_HOMEPNA,  lancepci_probe },
+-# endif /* INCLUDE_LANCE */
+-# ifdef	INCLUDE_RTL8139
+-  { PCI_VENDOR_ID_REALTEK,  PCI_DEVICE_ID_REALTEK_8139,    rtl8139_probe },
+-  { PCI_VENDOR_ID_DLINK,    PCI_DEVICE_ID_DFE530TXP,       rtl8139_probe },
+-  { PCI_VENDOR_ID_SMC_1211, PCI_DEVICE_ID_SMC_1211,        rtl8139_probe },
+-# endif /* INCLUDE_RTL8139 */
+-# ifdef	INCLUDE_OTULIP
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_TULIP,       otulip_probe },
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_TULIP_FAST,  otulip_probe },
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_TULIP_PLUS,  otulip_probe },
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_21142,       otulip_probe },
+-# endif /* INCLUDE_OTULIP */
+-# ifdef	INCLUDE_TULIP
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_TULIP,       tulip_probe },
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_TULIP_FAST,  tulip_probe },
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_TULIP_PLUS,  tulip_probe },
+-  { PCI_VENDOR_ID_DEC,      PCI_DEVICE_ID_DEC_21142,       tulip_probe },
+-  { PCI_VENDOR_ID_MACRONIX, PCI_DEVICE_ID_MX987x5,         tulip_probe },
+-  { PCI_VENDOR_ID_LINKSYS,  PCI_DEVICE_ID_LC82C115,        tulip_probe },
+-  { PCI_VENDOR_ID_LINKSYS,  PCI_DEVICE_ID_DEC_TULIP,       tulip_probe },
+-  { PCI_VENDOR_ID_DAVICOM,  PCI_DEVICE_ID_DM9102,          tulip_probe },
+-  { PCI_VENDOR_ID_DAVICOM,  PCI_DEVICE_ID_DM9009,          tulip_probe },
+-  { PCI_VENDOR_ID_ADMTEK,   PCI_DEVICE_ID_ADMTEK_0985,     tulip_probe },
+-  { PCI_VENDOR_ID_ADMTEK,   0x0981,                        tulip_probe },
+-  { 0x125B,                 0x1400,                        tulip_probe },
+-  { 0x11F6,                 0x9881,                        tulip_probe },
+-# endif /* INCLUDE_TULIP */
+-# ifdef INCLUDE_DAVICOM
+-  { PCI_VENDOR_ID_DAVICOM,   PCI_DEVICE_ID_DM9102,           davicom_probe },
+-  { PCI_VENDOR_ID_DAVICOM,   PCI_DEVICE_ID_DM9009,           davicom_probe },
+-# endif /* INCLUDE_DAVICOM */
+-# ifdef	INCLUDE_VIA_RHINE
+-  { PCI_VENDOR_ID_VIATEC,   PCI_DEVICE_ID_VIA_VT6102,      rhine_probe },
+-  { PCI_VENDOR_ID_VIATEC,   PCI_DEVICE_ID_VIA_RHINE_I,     rhine_probe },
+-  { PCI_VENDOR_ID_VIATEC,   PCI_DEVICE_ID_VIA_86C100A,     rhine_probe },
+-# endif /* INCLUDE_VIA_RHINE */
+-# ifdef INCLUDE_W89C840
+-  { PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C840, w89c840_probe },
+-  { PCI_VENDOR_ID_COMPEX,   PCI_DEVICE_ID_COMPEX_RL100ATX, w89c840_probe },
+-# endif /* INCLUDE_W89C840 */
+-# ifdef INCLUDE_SIS900
+-  { PCI_VENDOR_ID_SIS,      PCI_DEVICE_ID_SIS900,          sis900_probe },
+-  { PCI_VENDOR_ID_SIS,      PCI_DEVICE_ID_SIS7016,         sis900_probe },
+-# endif /* INCLUDE_SIS900 */
+-# ifdef INCLUDE_NATSEMI
+-  { PCI_VENDOR_ID_NS,       PCI_DEVICE_ID_DP83815,         natsemi_probe },
+-# endif /* INCLUDE_NATSEMI */
+-# ifdef INCLUDE_TLAN
+-  { PCI_VENDOR_ID_OLICOM,   PCI_DEVICE_ID_OLICOM_OC2326,   tlan_probe },
+-# endif /* INCLUDE_TLAN */
+-  { 0,                      0,                             0 }
+-};
+-#endif /* GRUB && INCLUDE_PCI */
+-
+-struct dispatch_table
+-{
+-  const char	*nic_name;
+-#ifdef	INCLUDE_PCI
+-  struct nic	*(*eth_probe) (struct nic *, unsigned short *,
+-			       struct pci_device *);
+-#else
+-  struct nic	*(*eth_probe) (struct nic *, unsigned short *);
+-#endif	/* INCLUDE_PCI */
+-  unsigned short	*probe_ioaddrs;		/* for probe overrides */
+-};
+-
+ /*
+- *	NIC probing is in order of appearance in this table.
++ *	NIC probing is in the order the drivers were linked togeter.
+  *	If for some reason you want to change the order,
+- *	just rearrange the entries (bracketed by the #ifdef/#endif)
++ *	just change the order you list the drivers in.
+  */
+-static struct dispatch_table	NIC[] =
+-{
+-#ifdef	INCLUDE_RTL8139
+-  { "RTL8139", rtl8139_probe, pci_ioaddrs },
+-#endif
+-#ifdef INCLUDE_SIS900
+-  { "SIS900", sis900_probe, pci_ioaddrs },	
+-#endif
+-#ifdef INCLUDE_NATSEMI
+-  { "NATSEMI", natsemi_probe, pci_ioaddrs },	
+-#endif
+-#ifdef	INCLUDE_WD
+-  { "WD", wd_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_3C503
+-  { "3C503", t503_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_NE
+-  { "NE*000", ne_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_3C509
+-  { "3C5x9", t509_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_3C529
+-  { "3C5x9", t529_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_3C595
+-  { "3C595", t595_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_3C90X
+-  { "3C90X", a3c90x_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_EEPRO
+-  { "EEPRO", eepro_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_EEPRO100
+-  { "EEPRO100", eepro100_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_EPIC100
+-  { "EPIC100", epic100_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_OTULIP
+-  { "OTulip", otulip_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_TULIP
+-  { "Tulip", tulip_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_DAVICOM
+-  { "DAVICOM", davicom_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_CS89X0
+-  { "CS89x0", cs89x0_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_NE2100
+-  { "NE2100", ne2100_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_NI6510
+-  { "NI6510", ni6510_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_SK_G16
+-  { "SK_G16", SK_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_3C507
+-  { "3C507", t507_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_NI5010
+-  { "NI5010", ni5010_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_NI5210
+-  { "NI5210", ni5210_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_EXOS205
+-  { "EXOS205", exos205_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_SMC9000
+-  { "SMC9000", smc9000_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_TIARA
+-  { "TIARA", tiara_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_DEPCA
+-  { "DEPCA", depca_probe, 0 },
+-#endif
+-#ifdef	INCLUDE_NS8390
+-  { "NE2000/PCI", nepci_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_LANCE
+-  { "LANCE/PCI", lancepci_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_VIA_RHINE
+-  { "VIA 86C100", rhine_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_W89C840
+-  { "W89C840F", w89c840_probe, pci_ioaddrs },
+-#endif
+-#ifdef	INCLUDE_TLAN
+-  { "Olicom 2326", tlan_probe, pci_ioaddrs },
+-#endif
+-  /* this entry must always be last to mark the end of list */
+-  { 0, 0, 0 }
+-};
+-
+-#define	NIC_TABLE_SIZE	(sizeof (NIC) / sizeof (NIC[0]))
+-
+-static int
+-eth_dummy (struct nic *dummy)
+-{
+-  return 0;
++	struct isa_probe_state *state = &dev->state.isa;
++	printf("Probing isa %s...\n", type_name);
++	if (dev->how_probe == PROBE_FIRST) {
++		state->advance = 0;
++		state->driver  = isa_drivers;
++		dev->index     = -1;
++	}
++	for(;;)
++	{
++		if ((dev->how_probe != PROBE_AWAKE) && state->advance) {
++			state->driver++;
++			dev->index = -1;
++		}
++		state->advance = 1;
++		
++		if (state->driver >= isa_drivers_end)
++			break;
++
++		if (state->driver->type != dev->type)
++			continue;
++
++		if (dev->how_probe != PROBE_AWAKE) {
++			dev->type_index++;
++		}
++		printf("[%s]", state->driver->name);
++		dev->devid.bus_type = ISA_BUS_TYPE;
++		/* FIXME how do I handle dev->index + PROBE_AGAIN?? */
++		/* driver will fill in vendor and device IDs */
++		if (state->driver->probe(dev, state->driver->ioaddrs)) {
++			state->advance = (dev->index == -1);
++			return PROBE_WORKED;
++		}
++		putchar('\n');
++	}
++	return PROBE_FAILED;
+ }
+-
+-static char	packet[ETH_FRAME_LEN];
+-
+-struct nic	nic =
+-{
+-  (void (*) (struct nic *)) eth_dummy,	/* reset */
+-  eth_dummy,				/* poll */
+-  (void (*) (struct nic *, const char *,
+-	     unsigned int, unsigned int,
+-	     const char *)) eth_dummy,	/* transmit */
+-  (void (*) (struct nic *)) eth_dummy,	/* disable */
+-#ifdef	T503_AUI
+-  1,					/* aui */
+ #else
+-  0,					/* no aui */
++#define isa_probe(d,tn) (PROBE_FAILED)
+ #endif
+-  &rom,					/* rom_info */
+-  arptable[ARP_CLIENT].node,		/* node_addr */
+-  packet,				/* packet */
+-  0,				/* packetlen */
+-  0,				/* priv_data */
++static const char *driver_name[] = {
++	"nic", 
++	"disk", 
++	"floppy",
+ };
+-
+-void
+-eth_reset (void)
++int probe(struct dev *dev)
+ {
+-  (*nic.reset) (&nic);
+-}
++	const char *type_name;
+ 
+-int
+-eth_probe (void)
+-{
+-  struct pci_device	*p;
+-  const struct dispatch_table	*t;
+-  static int probed = 0;
++	EnterFunction("probe");
+ 
+-  /* If already probed, don't try to probe it any longer.  */
+-  if (probed)
+-    return 1;
+-  
+-  /* Clear the ready flag.  */
+-  network_ready = 0;
+-  /* Clear the ARP table.  */
+-  grub_memset ((char *) arptable, 0,
+-	       MAX_ARP * sizeof (struct arptable_t));
+-  
+-  p = 0;
+-  
+-#ifdef	INCLUDE_PCI
+-  /* In GRUB, the ROM info is initialized here.  */
+-  rom = *((struct rom_info *) ROM_INFO_LOCATION);
+-  
+-  eth_pci_init(pci_nic_list);
+-  pci_ioaddrs[0] = 0;
+-  pci_ioaddrs[1] = 0;
+-  /* at this point we have a list of possible PCI candidates
+-     we just pick the first one with a non-zero ioaddr */
+-  for (p = pci_nic_list; p->vendor != 0; ++p)
+-    {
+-      if (p->ioaddr != 0)
+-	{
+-	  pci_ioaddrs[0] = p->ioaddr;
+-	  break;
++	type_name = "";
++	if ((dev->type >= 0) && 
++		(dev->type < sizeof(driver_name)/sizeof(driver_name[0]))) {
++		type_name = driver_name[dev->type];
+ 	}
+-    }
+-#endif
+-  
+-  etherboot_printf("Probing...");
+-	
+-#ifdef INCLUDE_PCI
+-  if (p->vendor)
+-    {
+-      struct pci_dispatch_table *pt;
+-      
+-      for (pt = PCI_NIC; pt->eth_probe != 0; pt++)
+-	if (p->vendor == pt->vendor && p->dev_id == pt->dev_id)
+-	  {
+-	    etherboot_printf ("[%s]", p->name);
+-	    if ((pt->eth_probe) (&nic, pci_ioaddrs, p))
+-	      {
+-		probed = 1;
+-		return 1;
+-	      }
+-	  }
+-    }
+-#endif /* INCLUDE_PCI */
+-	
+-  for (t = NIC; t->nic_name != 0; ++t)
+-    {
+-      etherboot_printf("[%s]", t->nic_name);
+-#ifdef	INCLUDE_PCI
+-      if ((*t->eth_probe) (&nic, t->probe_ioaddrs, p))
+-	{
+-	  probed = 1;
+-	  return 1;
++	if (dev->how_probe == PROBE_FIRST) {
++		dev->to_probe = PROBE_PCI;
++		memset(&dev->state, 0, sizeof(dev->state));
+ 	}
+-#else
+-      if ((*t->eth_probe) (&nic, t->probe_ioaddrs))
+-	{
+-	  probed = 1;
+-	  return 1;
++	if (dev->to_probe == PROBE_PCI) {
++		dev->how_probe = pci_probe(dev, type_name);
++		if (dev->how_probe == PROBE_FAILED) {
++			dev->to_probe = PROBE_ISA;
++		}
++	}
++	if (dev->to_probe == PROBE_ISA) {
++		dev->how_probe = isa_probe(dev, type_name);
++		if (dev->how_probe == PROBE_FAILED) {
++			dev->to_probe = PROBE_NONE;
++		}
++	}
++	if ((dev->to_probe != PROBE_PCI) &&
++		(dev->to_probe != PROBE_ISA)) {
++		dev->how_probe = PROBE_FAILED;
++		
+ 	}
+-#endif	/* INCLUDE_PCI */
+-    }
+-  
+-  return 0;
+-}
+-
+-int
+-eth_poll (void)
+-{
+-  return ((*nic.poll) (&nic));
+-}
+ 
+-void
+-eth_transmit (const char *d, unsigned int t, unsigned int s, const void *p)
+-{
+-  (*nic.transmit) (&nic, d, t, s, p);
+-  if (t == IP)
+-    twiddle ();
++	LeaveFunction("probe");
++	return dev->how_probe;
+ }
+ 
+-void
+-eth_disable (void)
++void disable(struct dev *dev)
+ {
+-  (*nic.disable) (&nic);
++	if (dev->disable) {
++		dev->disable(dev);
++		dev->disable = 0;
++	}
+ }
+diff -Naur grub-0.97.orig/netboot/cpu.h grub-0.97/netboot/cpu.h
+--- grub-0.97.orig/netboot/cpu.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/cpu.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,243 @@
++#ifndef I386_BITS_CPU_H
++#define I386_BITS_CPU_H
++
++
++/* Sample usage: CPU_FEATURE_P(cpu.x86_capability, FPU) */
++#define CPU_FEATURE_P(CAP, FEATURE) \
++	(!!(CAP[(X86_FEATURE_##FEATURE)/32] & ((X86_FEATURE_##FEATURE) & 0x1f)))
++
++#define NCAPINTS	4	/* Currently we have 4 32-bit words worth of info */
++
++/* Intel-defined CPU features, CPUID level 0x00000001, word 0 */
++#define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
++#define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
++#define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
++#define X86_FEATURE_PSE 	(0*32+ 3) /* Page Size Extensions */
++#define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
++#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
++#define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
++#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
++#define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
++#define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
++#define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
++#define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
++#define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
++#define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
++#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
++#define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
++#define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
++#define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
++#define X86_FEATURE_CLFLSH	(0*32+19) /* Supports the CLFLUSH instruction */
++#define X86_FEATURE_DTES	(0*32+21) /* Debug Trace Store */
++#define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
++#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
++#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
++				          /* of FPU context), and CR4.OSFXSR available */
++#define X86_FEATURE_XMM		(0*32+25) /* Streaming SIMD Extensions */
++#define X86_FEATURE_XMM2	(0*32+26) /* Streaming SIMD Extensions-2 */
++#define X86_FEATURE_SELFSNOOP	(0*32+27) /* CPU self snoop */
++#define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
++#define X86_FEATURE_ACC		(0*32+29) /* Automatic clock control */
++#define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
++
++/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
++/* Don't duplicate feature flags which are redundant with Intel! */
++#define X86_FEATURE_SYSCALL	(1*32+11) /* SYSCALL/SYSRET */
++#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
++#define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
++#define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
++#define X86_FEATURE_3DNOW	(1*32+31) /* 3DNow! */
++
++/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
++#define X86_FEATURE_RECOVERY	(2*32+ 0) /* CPU in recovery mode */
++#define X86_FEATURE_LONGRUN	(2*32+ 1) /* Longrun power control */
++#define X86_FEATURE_LRTI	(2*32+ 3) /* LongRun table interface */
++
++/* Other features, Linux-defined mapping, word 3 */
++/* This range is used for feature bits which conflict or are synthesized */
++#define X86_FEATURE_CXMMX	(3*32+ 0) /* Cyrix MMX extensions */
++#define X86_FEATURE_K6_MTRR	(3*32+ 1) /* AMD K6 nonstandard MTRRs */
++#define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
++#define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
++
++#define MAX_X86_VENDOR_ID 16
++struct cpuinfo_x86 {
++	uint8_t	 x86;		/* CPU family */
++	uint8_t	 x86_model;
++	uint8_t	 x86_mask;
++
++       	int	 cpuid_level;	/* Maximum supported CPUID level, -1=no CPUID */
++	unsigned x86_capability[NCAPINTS];
++	char	 x86_vendor_id[MAX_X86_VENDOR_ID];
++};
++
++
++#define X86_VENDOR_INTEL 0
++#define X86_VENDOR_CYRIX 1
++#define X86_VENDOR_AMD 2
++#define X86_VENDOR_UMC 3
++#define X86_VENDOR_NEXGEN 4
++#define X86_VENDOR_CENTAUR 5
++#define X86_VENDOR_RISE 6
++#define X86_VENDOR_TRANSMETA 7
++#define X86_VENDOR_NSC 8
++#define X86_VENDOR_UNKNOWN 0xff
++
++/*
++ * EFLAGS bits
++ */
++#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
++#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
++#define X86_EFLAGS_AF	0x00000010 /* Auxillary carry Flag */
++#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
++#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
++#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
++#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
++#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
++#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
++#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
++#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
++#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
++#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
++#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
++#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
++#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
++#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
++
++/*
++ * Generic CPUID function
++ */
++static inline void cpuid(int op, 
++	unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx)
++{
++	__asm__("cpuid"
++		: "=a" (*eax),
++		  "=b" (*ebx),
++		  "=c" (*ecx),
++		  "=d" (*edx)
++		: "0" (op));
++}
++
++/*
++ * CPUID functions returning a single datum
++ */
++static inline unsigned int cpuid_eax(unsigned int op)
++{
++	unsigned int eax;
++
++	__asm__("cpuid"
++		: "=a" (eax)
++		: "0" (op)
++		: "bx", "cx", "dx");
++	return eax;
++}
++static inline unsigned int cpuid_ebx(unsigned int op)
++{
++	unsigned int eax, ebx;
++
++	__asm__("cpuid"
++		: "=a" (eax), "=b" (ebx)
++		: "0" (op)
++		: "cx", "dx" );
++	return ebx;
++}
++static inline unsigned int cpuid_ecx(unsigned int op)
++{
++	unsigned int eax, ecx;
++
++	__asm__("cpuid"
++		: "=a" (eax), "=c" (ecx)
++		: "0" (op)
++		: "bx", "dx" );
++	return ecx;
++}
++static inline unsigned int cpuid_edx(unsigned int op)
++{
++	unsigned int eax, edx;
++
++	__asm__("cpuid"
++		: "=a" (eax), "=d" (edx)
++		: "0" (op)
++		: "bx", "cx");
++	return edx;
++}
++
++/*
++ * Intel CPU features in CR4
++ */
++#define X86_CR4_VME		0x0001	/* enable vm86 extensions */
++#define X86_CR4_PVI		0x0002	/* virtual interrupts flag enable */
++#define X86_CR4_TSD		0x0004	/* disable time stamp at ipl 3 */
++#define X86_CR4_DE		0x0008	/* enable debugging extensions */
++#define X86_CR4_PSE		0x0010	/* enable page size extensions */
++#define X86_CR4_PAE		0x0020	/* enable physical address extensions */
++#define X86_CR4_MCE		0x0040	/* Machine check enable */
++#define X86_CR4_PGE		0x0080	/* enable global pages */
++#define X86_CR4_PCE		0x0100	/* enable performance counters at ipl 3 */
++#define X86_CR4_OSFXSR		0x0200	/* enable fast FPU save and restore */
++#define X86_CR4_OSXMMEXCPT	0x0400	/* enable unmasked SSE exceptions */
++
++
++#define MSR_K6_EFER			0xC0000080
++/* EFER bits: */ 
++#define _EFER_SCE 0  /* SYSCALL/SYSRET */
++#define _EFER_LME 8  /* Long mode enable */
++#define _EFER_LMA 10 /* Long mode active (read-only) */
++#define _EFER_NX 11  /* No execute enable */
++
++#define EFER_SCE (1<<_EFER_SCE)
++#define EFER_LME (1<<EFER_LME)
++#define EFER_LMA (1<<EFER_LMA)
++#define EFER_NX (1<<_EFER_NX)
++
++#define rdmsr(msr,val1,val2) \
++     __asm__ __volatile__("rdmsr" \
++			  : "=a" (val1), "=d" (val2) \
++			  : "c" (msr))
++
++#define wrmsr(msr,val1,val2) \
++     __asm__ __volatile__("wrmsr" \
++			  : /* no outputs */ \
++			  : "c" (msr), "a" (val1), "d" (val2))
++
++
++#define read_cr0()	({ \
++	unsigned int __dummy; \
++	__asm__( \
++		"movl %%cr0, %0\n\t" \
++		:"=r" (__dummy)); \
++	__dummy; \
++})
++#define write_cr0(x) \
++	__asm__("movl %0,%%cr0": :"r" (x));
++
++#define read_cr3()	({ \
++	unsigned int __dummy; \
++	__asm__( \
++		"movl %%cr3, %0\n\t" \
++		:"=r" (__dummy)); \
++	__dummy; \
++})
++#define write_cr3x(x) \
++	__asm__("movl %0,%%cr3": :"r" (x));
++
++
++#define read_cr4()	({ \
++	unsigned int __dummy; \
++	__asm__( \
++		"movl %%cr4, %0\n\t" \
++		:"=r" (__dummy)); \
++	__dummy; \
++})
++#define write_cr4x(x) \
++	__asm__("movl %0,%%cr4": :"r" (x));
++
++
++extern struct cpuinfo_x86 cpu_info;
++#ifdef CONFIG_X86_64
++extern void cpu_setup(void);
++#else
++#define cpu_setup() do {} while(0)
++#endif
++
++#endif /* I386_BITS_CPU_H */
+diff -Naur grub-0.97.orig/netboot/cs89x0.c grub-0.97/netboot/cs89x0.c
+--- grub-0.97.orig/netboot/cs89x0.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/cs89x0.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,659 +0,0 @@
+-/* cs89x0.c: A Crystal Semiconductor CS89[02]0 driver for etherboot. */
+-/*
+-  Permission is granted to distribute the enclosed cs89x0.[ch] driver
+-  only in conjunction with the Etherboot package.  The code is
+-  ordinarily distributed under the GPL.
+-  
+-  Russ Nelson, January 2000
+-
+-  ChangeLog:
+-
+-  Thu Dec 6 22:40:00 1996  Markus Gutschke  <gutschk@math.uni-muenster.de>
+-
+-  * disabled all "advanced" features; this should make the code more reliable
+-
+-  * reorganized the reset function
+-
+-  * always reset the address port, so that autoprobing will continue working
+-
+-  * some cosmetic changes
+-
+-  * 2.5
+-
+-  Thu Dec 5 21:00:00 1996  Markus Gutschke  <gutschk@math.uni-muenster.de>
+-
+-  * tested the code against a CS8900 card
+-
+-  * lots of minor bug fixes and adjustments
+-
+-  * this is the first release, that actually works! it still requires some
+-    changes in order to be more tolerant to different environments
+-
+-  * 4
+-
+-  Fri Nov 22 23:00:00 1996  Markus Gutschke  <gutschk@math.uni-muenster.de>
+-
+-  * read the manuals for the CS89x0 chipsets and took note of all the
+-    changes that will be neccessary in order to adapt Russel Nelson's code
+-    to the requirements of a BOOT-Prom
+-
+-  * 6
+-
+-  Thu Nov 19 22:00:00 1996  Markus Gutschke  <gutschk@math.uni-muenster.de>
+-
+-  * Synched with Russel Nelson's current code (v1.00)
+-
+-  * 2
+-
+-  Thu Nov 12 18:00:00 1996  Markus Gutschke  <gutschk@math.uni-muenster.de>
+-
+-  * Cleaned up some of the code and tried to optimize the code size.
+-
+-  * 1.5
+-
+-  Sun Nov 10 16:30:00 1996  Markus Gutschke  <gutschk@math.uni-muenster.de>
+-
+-  * First experimental release. This code compiles fine, but I
+-  have no way of testing whether it actually works.
+-
+-  * I did not (yet) bother to make the code 16bit aware, so for
+-  the time being, it will only work for Etherboot/32.
+-
+-  * 12
+-
+-  */
+-
+-#include "etherboot.h"
+-#include "nic.h"
+-#include "cards.h"
+-#include "cs89x0.h"
+-
+-static unsigned short	eth_nic_base;
+-static unsigned long    eth_mem_start;
+-static unsigned short   eth_irq;
+-static unsigned short   eth_cs_type;	/* one of: CS8900, CS8920, CS8920M  */
+-static unsigned short   eth_auto_neg_cnf;
+-static unsigned short   eth_adapter_cnf;
+-static unsigned short	eth_linectl;
+-
+-/*************************************************************************
+-	CS89x0 - specific routines
+-**************************************************************************/
+-
+-static inline int readreg(int portno)
+-{
+-	outw(portno, eth_nic_base + ADD_PORT);
+-	return inw(eth_nic_base + DATA_PORT);
+-}
+-
+-static inline void writereg(int portno, int value)
+-{
+-	outw(portno, eth_nic_base + ADD_PORT);
+-	outw(value, eth_nic_base + DATA_PORT);
+-	return;
+-}
+-
+-/*************************************************************************
+-EEPROM access
+-**************************************************************************/
+-
+-static int wait_eeprom_ready(void)
+-{
+-	unsigned long tmo = currticks() + 4*TICKS_PER_SEC;
+-
+-	/* check to see if the EEPROM is ready, a timeout is used -
+-	   just in case EEPROM is ready when SI_BUSY in the
+-	   PP_SelfST is clear */
+-	while(readreg(PP_SelfST) & SI_BUSY) {
+-		if (currticks() >= tmo)
+-			return -1; }
+-	return 0;
+-}
+-
+-static int get_eeprom_data(int off, int len, unsigned short *buffer)
+-{
+-	int i;
+-
+-#ifdef	EDEBUG
+-	printf("\ncs: EEPROM data from %hX for %hX:",off,len);
+-#endif
+-	for (i = 0; i < len; i++) {
+-		if (wait_eeprom_ready() < 0)
+-			return -1;
+-		/* Now send the EEPROM read command and EEPROM location
+-		   to read */
+-		writereg(PP_EECMD, (off + i) | EEPROM_READ_CMD);
+-		if (wait_eeprom_ready() < 0)
+-			return -1;
+-		buffer[i] = readreg(PP_EEData);
+-#ifdef	EDEBUG
+-		if (!(i%10))
+-			printf("\ncs: ");
+-		printf("%hX ", buffer[i]);
+-#endif
+-	}
+-#ifdef	EDEBUG
+-	putchar('\n');
+-#endif
+-
+-	return(0);
+-}
+-
+-static int get_eeprom_chksum(int off, int len, unsigned short *buffer)
+-{
+-	int  i, cksum;
+-
+-	cksum = 0;
+-	for (i = 0; i < len; i++)
+-		cksum += buffer[i];
+-	cksum &= 0xffff;
+-	if (cksum == 0)
+-		return 0;
+-	return -1;
+-}
+-
+-/*************************************************************************
+-Activate all of the available media and probe for network
+-**************************************************************************/
+-
+-static void clrline(void)
+-{
+-	int i;
+-
+-	putchar('\r');
+-	for (i = 79; i--; ) putchar(' ');
+-	printf("\rcs: ");
+-	return;
+-}
+-
+-static void control_dc_dc(int on_not_off)
+-{
+-	unsigned int selfcontrol;
+-	unsigned long tmo = currticks() + TICKS_PER_SEC;
+-
+-	/* control the DC to DC convertor in the SelfControl register.  */
+-	selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
+-	if (((eth_adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
+-		selfcontrol |= HCB1;
+-	else
+-		selfcontrol &= ~HCB1;
+-	writereg(PP_SelfCTL, selfcontrol);
+-
+-	/* Wait for the DC/DC converter to power up - 1000ms */
+-	while (currticks() < tmo);
+-
+-	return;
+-}
+-
+-static int detect_tp(void)
+-{
+-	unsigned long tmo;
+-
+-	/* Turn on the chip auto detection of 10BT/ AUI */
+-
+-	clrline(); printf("attempting %s:","TP");
+-
+-        /* If connected to another full duplex capable 10-Base-T card
+-	   the link pulses seem to be lost when the auto detect bit in
+-	   the LineCTL is set.  To overcome this the auto detect bit
+-	   will be cleared whilst testing the 10-Base-T interface.
+-	   This would not be necessary for the sparrow chip but is
+-	   simpler to do it anyway. */
+-	writereg(PP_LineCTL, eth_linectl &~ AUI_ONLY);
+-	control_dc_dc(0);
+-
+-        /* Delay for the hardware to work out if the TP cable is
+-	   present - 150ms */
+-	for (tmo = currticks() + 4; currticks() < tmo; );
+-
+-	if ((readreg(PP_LineST) & LINK_OK) == 0)
+-		return 0;
+-
+-	if (eth_cs_type != CS8900) {
+-
+-		writereg(PP_AutoNegCTL, eth_auto_neg_cnf & AUTO_NEG_MASK);
+-
+-		if ((eth_auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
+-			printf(" negotiating duplex... ");
+-			while (readreg(PP_AutoNegST) & AUTO_NEG_BUSY) {
+-				if (currticks() - tmo > 40*TICKS_PER_SEC) {
+-					printf("time out ");
+-					break;
+-				}
+-			}
+-		}
+-		if (readreg(PP_AutoNegST) & FDX_ACTIVE)
+-			printf("using full duplex");
+-		else
+-			printf("using half duplex");
+-	}
+-
+-	return A_CNF_MEDIA_10B_T;
+-}
+-
+-/* send a test packet - return true if carrier bits are ok */
+-static int send_test_pkt(struct nic *nic)
+-{
+-	static unsigned char testpacket[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
+-				     0, 46, /*A 46 in network order       */
+-				     0, 0,  /*DSAP=0 & SSAP=0 fields      */
+-				     0xf3,0 /*Control (Test Req+P bit set)*/ };
+-	unsigned long tmo;
+-
+-	writereg(PP_LineCTL, readreg(PP_LineCTL) | SERIAL_TX_ON);
+-
+-	memcpy(testpacket, nic->node_addr, ETH_ALEN);
+-	memcpy(testpacket+ETH_ALEN, nic->node_addr, ETH_ALEN);
+-
+-	outw(TX_AFTER_ALL, eth_nic_base + TX_CMD_PORT);
+-	outw(ETH_ZLEN, eth_nic_base + TX_LEN_PORT);
+-
+-	/* Test to see if the chip has allocated memory for the packet */
+-	for (tmo = currticks() + 2;
+-	     (readreg(PP_BusST) & READY_FOR_TX_NOW) == 0; )
+-		if (currticks() >= tmo)
+-			return(0);
+-
+-	/* Write the contents of the packet */
+-	outsw(eth_nic_base + TX_FRAME_PORT, testpacket,
+-	      (ETH_ZLEN+1)>>1);
+-
+-	printf(" sending test packet ");
+-	/* wait a couple of timer ticks for packet to be received */
+-	for (tmo = currticks() + 2; currticks() < tmo; );
+-
+-	if ((readreg(PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
+-			printf("succeeded");
+-			return 1;
+-	}
+-	printf("failed");
+-	return 0;
+-}
+-
+-
+-static int detect_aui(struct nic *nic)
+-{
+-	clrline(); printf("attempting %s:","AUI");
+-	control_dc_dc(0);
+-
+-	writereg(PP_LineCTL, (eth_linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
+-
+-	if (send_test_pkt(nic)) {
+-		return A_CNF_MEDIA_AUI; }
+-	else
+-		return 0;
+-}
+-
+-static int detect_bnc(struct nic *nic)
+-{
+-	clrline(); printf("attempting %s:","BNC");
+-	control_dc_dc(1);
+-
+-	writereg(PP_LineCTL, (eth_linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
+-
+-	if (send_test_pkt(nic)) {
+-		return A_CNF_MEDIA_10B_2; }
+-	else
+-		return 0;
+-}
+-
+-/**************************************************************************
+-ETH_RESET - Reset adapter
+-***************************************************************************/
+-
+-static void cs89x0_reset(struct nic *nic)
+-{
+-	int  i;
+-	unsigned long reset_tmo;
+-
+-	writereg(PP_SelfCTL, readreg(PP_SelfCTL) | POWER_ON_RESET);
+-
+-	/* wait for two ticks; that is 2*55ms */
+-	for (reset_tmo = currticks() + 2; currticks() < reset_tmo; );
+-
+-	if (eth_cs_type != CS8900) {
+-		/* Hardware problem requires PNP registers to be reconfigured
+-		   after a reset */
+-		if (eth_irq != 0xFFFF) {
+-			outw(PP_CS8920_ISAINT, eth_nic_base + ADD_PORT);
+-			outb(eth_irq, eth_nic_base + DATA_PORT);
+-			outb(0, eth_nic_base + DATA_PORT + 1); }
+-
+-		if (eth_mem_start) {
+-			outw(PP_CS8920_ISAMemB, eth_nic_base + ADD_PORT);
+-			outb((eth_mem_start >> 8) & 0xff, eth_nic_base + DATA_PORT);
+-			outb((eth_mem_start >> 24) & 0xff, eth_nic_base + DATA_PORT + 1); } }
+-
+-	/* Wait until the chip is reset */
+-	for (reset_tmo = currticks() + 2;
+-	     (readreg(PP_SelfST) & INIT_DONE) == 0 &&
+-		     currticks() < reset_tmo; );
+-
+-	/* disable interrupts and memory accesses */
+-	writereg(PP_BusCTL, 0);
+-
+-	/* set the ethernet address */
+-	for (i=0; i < ETH_ALEN/2; i++)
+-		writereg(PP_IA+i*2,
+-			 nic->node_addr[i*2] |
+-			 (nic->node_addr[i*2+1] << 8));
+-
+-	/* receive only error free packets addressed to this card */
+-	writereg(PP_RxCTL, DEF_RX_ACCEPT);
+-
+-	/* do not generate any interrupts on receive operations */
+-	writereg(PP_RxCFG, 0);
+-
+-	/* do not generate any interrupts on transmit operations */
+-	writereg(PP_TxCFG, 0);
+-
+-	/* do not generate any interrupts on buffer operations */
+-	writereg(PP_BufCFG, 0);
+-
+-	/* reset address port, so that autoprobing will keep working */
+-	outw(PP_ChipID, eth_nic_base + ADD_PORT);
+-
+-	return;
+-}
+-
+-/**************************************************************************
+-ETH_TRANSMIT - Transmit a frame
+-***************************************************************************/
+-
+-static void cs89x0_transmit(
+-	struct nic *nic,
+-	const char *d,			/* Destination */
+-	unsigned int t,			/* Type */
+-	unsigned int s,			/* size */
+-	const char *p)			/* Packet */
+-{
+-	unsigned long tmo;
+-	int           sr;
+-
+-	/* does this size have to be rounded??? please,
+-	   somebody have a look in the specs */
+-	if ((sr = ((s + ETH_HLEN + 1)&~1)) < ETH_ZLEN)
+-		sr = ETH_ZLEN;
+-
+-retry:
+-	/* initiate a transmit sequence */
+-	outw(TX_AFTER_ALL, eth_nic_base + TX_CMD_PORT);
+-	outw(sr, eth_nic_base + TX_LEN_PORT);
+-
+-	/* Test to see if the chip has allocated memory for the packet */
+-	if ((readreg(PP_BusST) & READY_FOR_TX_NOW) == 0) {
+-		/* Oops... this should not happen! */
+-		printf("cs: unable to send packet; retrying...\n");
+-		for (tmo = currticks() + 5*TICKS_PER_SEC; currticks() < tmo; );
+-		cs89x0_reset(nic);
+-		goto retry; }
+-
+-	/* Write the contents of the packet */
+-	outsw(eth_nic_base + TX_FRAME_PORT, d, ETH_ALEN/2);
+-	outsw(eth_nic_base + TX_FRAME_PORT, nic->node_addr,
+-	      ETH_ALEN/2);
+-	outw(((t >> 8)&0xFF)|(t << 8), eth_nic_base + TX_FRAME_PORT);
+-	outsw(eth_nic_base + TX_FRAME_PORT, p, (s+1)/2);
+-	for (sr = sr/2 - (s+1)/2 - ETH_ALEN - 1; sr-- > 0;
+-	     outw(0, eth_nic_base + TX_FRAME_PORT));
+-
+-	/* wait for transfer to succeed */
+-	for (tmo = currticks()+5*TICKS_PER_SEC;
+-	     (s = readreg(PP_TxEvent)&~0x1F) == 0 && currticks() < tmo;)
+-		/* nothing */ ;
+-	if ((s & TX_SEND_OK_BITS) != TX_OK) {
+-		printf("\ntransmission error %#hX\n", s);
+-	}
+-
+-	return;
+-}
+-
+-/**************************************************************************
+-ETH_POLL - Wait for a frame
+-***************************************************************************/
+-
+-static int cs89x0_poll(struct nic *nic)
+-{
+-	int status;
+-
+-	status = readreg(PP_RxEvent);
+-
+-	if ((status & RX_OK) == 0)
+-		return(0);
+-
+-	status = inw(eth_nic_base + RX_FRAME_PORT);
+-	nic->packetlen = inw(eth_nic_base + RX_FRAME_PORT);
+-	insw(eth_nic_base + RX_FRAME_PORT, nic->packet, nic->packetlen >> 1);
+-	if (nic->packetlen & 1)
+-		nic->packet[nic->packetlen-1] = inw(eth_nic_base + RX_FRAME_PORT);
+-	return 1;
+-}
+-
+-static void cs89x0_disable(struct nic *nic)
+-{
+-	cs89x0_reset(nic);
+-}
+-
+-/**************************************************************************
+-ETH_PROBE - Look for an adapter
+-***************************************************************************/
+-
+-struct nic *cs89x0_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	static const unsigned int netcard_portlist[] = {
+-#ifdef	CS_SCAN
+-		CS_SCAN,
+-#else	/* use "conservative" default values for autoprobing */
+-		0x300,0x320,0x340,0x200,0x220,0x240,
+-		0x260,0x280,0x2a0,0x2c0,0x2e0,
+-	/* if that did not work, then be more aggressive */
+-		0x301,0x321,0x341,0x201,0x221,0x241,
+-		0x261,0x281,0x2a1,0x2c1,0x2e1,
+-#endif
+-		0};
+-
+-	int      i, result = -1;
+-	unsigned rev_type = 0, ioaddr, ioidx, isa_cnf, cs_revision;
+-	unsigned short eeprom_buff[CHKSUM_LEN];
+-
+-
+-	for (ioidx = 0; (ioaddr=netcard_portlist[ioidx++]) != 0; ) {
+-		/* if they give us an odd I/O address, then do ONE write to
+-		   the address port, to get it back to address zero, where we
+-		   expect to find the EISA signature word. */
+-		if (ioaddr & 1) {
+-			ioaddr &= ~1;
+-			if ((inw(ioaddr + ADD_PORT) & ADD_MASK) != ADD_SIG)
+-				continue;
+-			outw(PP_ChipID, ioaddr + ADD_PORT);
+-		}
+-
+-		if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG)
+-			continue;
+-		eth_nic_base = ioaddr;
+-
+-		/* get the chip type */
+-		rev_type = readreg(PRODUCT_ID_ADD);
+-		eth_cs_type = rev_type &~ REVISON_BITS;
+-		cs_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
+-
+-		printf("\ncs: cs89%c0%s rev %c, base %#hX",
+-		       eth_cs_type==CS8900?'0':'2',
+-		       eth_cs_type==CS8920M?"M":"",
+-		       cs_revision,
+-		       eth_nic_base);
+-
+-		/* First check to see if an EEPROM is attached*/
+-		if ((readreg(PP_SelfST) & EEPROM_PRESENT) == 0) {
+-			printf("\ncs: no EEPROM...\n");
+-			outw(PP_ChipID, eth_nic_base + ADD_PORT);
+-			continue; }
+-		else if (get_eeprom_data(START_EEPROM_DATA,CHKSUM_LEN,
+-					 eeprom_buff) < 0) {
+-			printf("\ncs: EEPROM read failed...\n");
+-			outw(PP_ChipID, eth_nic_base + ADD_PORT);
+-			continue; }
+-		else if (get_eeprom_chksum(START_EEPROM_DATA,CHKSUM_LEN,
+-					   eeprom_buff) < 0) {
+-			printf("\ncs: EEPROM checksum bad...\n");
+-			outw(PP_ChipID, eth_nic_base + ADD_PORT);
+-			continue; }
+-
+-		/* get transmission control word but keep the
+-		   autonegotiation bits */
+-		eth_auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
+-		/* Store adapter configuration */
+-		eth_adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
+-		/* Store ISA configuration */
+-		isa_cnf = eeprom_buff[ISA_CNF_OFFSET/2];
+-
+-		/* store the initial memory base address */
+-		eth_mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
+-
+-		printf("%s%s%s, addr ",
+-		       (eth_adapter_cnf & A_CNF_10B_T)?", RJ-45":"",
+-		       (eth_adapter_cnf & A_CNF_AUI)?", AUI":"",
+-		       (eth_adapter_cnf & A_CNF_10B_2)?", BNC":"");
+-
+-		/* If this is a CS8900 then no pnp soft */
+-		if (eth_cs_type != CS8900 &&
+-		    /* Check if the ISA IRQ has been set  */
+-		    (i = readreg(PP_CS8920_ISAINT) & 0xff,
+-		     (i != 0 && i < CS8920_NO_INTS)))
+-			eth_irq = i;
+-		else {
+-			i = isa_cnf & INT_NO_MASK;
+-			if (eth_cs_type == CS8900) {
+-				/* the table that follows is dependent
+-				   upon how you wired up your cs8900
+-				   in your system.  The table is the
+-				   same as the cs8900 engineering demo
+-				   board.  irq_map also depends on the
+-				   contents of the table.  Also see
+-				   write_irq, which is the reverse
+-				   mapping of the table below. */
+-				if (i < 4) i = "\012\013\014\005"[i];
+-				else printf("\ncs: BUG: isa_config is %d\n", i); }
+-			eth_irq = i; }
+-
+-		/* Retrieve and print the ethernet address. */
+-		for (i=0; i<ETH_ALEN; i++) {
+-			nic->node_addr[i] = ((unsigned char *)eeprom_buff)[i];
+-		}
+-		printf("%!\n", nic->node_addr);
+-
+-		/* Set the LineCTL quintuplet based on adapter
+-		   configuration read from EEPROM */
+-		if ((eth_adapter_cnf & A_CNF_EXTND_10B_2) &&
+-		    (eth_adapter_cnf & A_CNF_LOW_RX_SQUELCH))
+-			eth_linectl = LOW_RX_SQUELCH;
+-		else
+-			eth_linectl = 0;
+-
+-		/* check to make sure that they have the "right"
+-		   hardware available */
+-		switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) {
+-		case A_CNF_MEDIA_10B_T: result = eth_adapter_cnf & A_CNF_10B_T;
+-			break;
+-		case A_CNF_MEDIA_AUI:   result = eth_adapter_cnf & A_CNF_AUI;
+-			break;
+-		case A_CNF_MEDIA_10B_2: result = eth_adapter_cnf & A_CNF_10B_2;
+-			break;
+-		default: result = eth_adapter_cnf & (A_CNF_10B_T | A_CNF_AUI |
+-						     A_CNF_10B_2);
+-		}
+-		if (!result) {
+-			printf("cs: EEPROM is configured for unavailable media\n");
+-		error:
+-			writereg(PP_LineCTL, readreg(PP_LineCTL) &
+-				 ~(SERIAL_TX_ON | SERIAL_RX_ON));
+-			outw(PP_ChipID, eth_nic_base + ADD_PORT);
+-			continue;
+-		}
+-
+-		/* Initialize the card for probing of the attached media */
+-		cs89x0_reset(nic);
+-
+-		/* set the hardware to the configured choice */
+-		switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) {
+-		case A_CNF_MEDIA_10B_T:
+-			result = detect_tp();
+-			if (!result) {
+-				clrline();
+-				printf("10Base-T (RJ-45%s",
+-				       ") has no cable\n"); }
+-			/* check "ignore missing media" bit */
+-			if (eth_auto_neg_cnf & IMM_BIT)
+-				/* Yes! I don't care if I see a link pulse */
+-				result = A_CNF_MEDIA_10B_T;
+-			break;
+-		case A_CNF_MEDIA_AUI:
+-			result = detect_aui(nic);
+-			if (!result) {
+-				clrline();
+-				printf("10Base-5 (AUI%s",
+-				       ") has no cable\n"); }
+-			/* check "ignore missing media" bit */
+-			if (eth_auto_neg_cnf & IMM_BIT)
+-				/* Yes! I don't care if I see a carrrier */
+-				result = A_CNF_MEDIA_AUI;
+-			break;
+-		case A_CNF_MEDIA_10B_2:
+-			result = detect_bnc(nic);
+-			if (!result) {
+-				clrline();
+-				printf("10Base-2 (BNC%s",
+-				       ") has no cable\n"); }
+-			/* check "ignore missing media" bit */
+-			if (eth_auto_neg_cnf & IMM_BIT)
+-				/* Yes! I don't care if I can xmit a packet */
+-				result = A_CNF_MEDIA_10B_2;
+-			break;
+-		case A_CNF_MEDIA_AUTO:
+-			writereg(PP_LineCTL, eth_linectl | AUTO_AUI_10BASET);
+-			if (eth_adapter_cnf & A_CNF_10B_T)
+-				if ((result = detect_tp()) != 0)
+-					break;
+-			if (eth_adapter_cnf & A_CNF_AUI)
+-				if ((result = detect_aui(nic)) != 0)
+-					break;
+-			if (eth_adapter_cnf & A_CNF_10B_2)
+-				if ((result = detect_bnc(nic)) != 0)
+-					break;
+-			clrline(); printf("no media detected\n");
+-			goto error;
+-		}
+-		clrline();
+-		switch(result) {
+-		case 0:                 printf("no network cable attached to configured media\n");
+-			goto error;
+-		case A_CNF_MEDIA_10B_T: printf("using 10Base-T (RJ-45)\n");
+-			break;
+-		case A_CNF_MEDIA_AUI:   printf("using 10Base-5 (AUI)\n");
+-			break;
+-		case A_CNF_MEDIA_10B_2: printf("using 10Base-2 (BNC)\n");
+-			break;
+-		}
+-
+-		/* Turn on both receive and transmit operations */
+-		writereg(PP_LineCTL, readreg(PP_LineCTL) | SERIAL_RX_ON |
+-			 SERIAL_TX_ON);
+-
+-		break;
+-	}
+-
+-	if (ioaddr == 0)
+-		return (0);
+-	nic->reset = cs89x0_reset;
+-	nic->poll = cs89x0_poll;
+-	nic->transmit = cs89x0_transmit;
+-	nic->disable = cs89x0_disable;
+-	return (nic);
+-}
+-
+-/*
+- * Local variables:
+- *  c-basic-offset: 8
+- * End:
+- */
+-
+diff -Naur grub-0.97.orig/netboot/cs89x0.h grub-0.97/netboot/cs89x0.h
+--- grub-0.97.orig/netboot/cs89x0.h	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/cs89x0.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,461 +0,0 @@
+-/*  Copyright, 1988-1992, Russell Nelson, Crynwr Software
+-
+-   This program is free software; you can redistribute it and/or modify
+-   it under the terms of the GNU General Public License as published by
+-   the Free Software Foundation, version 1.
+-
+-   This program is distributed in the hope that it will be useful,
+-   but WITHOUT ANY WARRANTY; without even the implied warranty of
+-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+-   GNU General Public License for more details.
+-
+-   You should have received a copy of the GNU General Public License
+-   along with this program; if not, write to the Free Software
+-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+-
+-#define PP_ChipID 0x0000	/* offset   0h -> Corp -ID              */
+-				/* offset   2h -> Model/Product Number  */
+-				/* offset   3h -> Chip Revision Number  */
+-
+-#define PP_ISAIOB 0x0020	/*  IO base address */
+-#define PP_CS8900_ISAINT 0x0022	/*  ISA interrupt select */
+-#define PP_CS8920_ISAINT 0x0370	/*  ISA interrupt select */
+-#define PP_CS8900_ISADMA 0x0024	/*  ISA Rec DMA channel */
+-#define PP_CS8920_ISADMA 0x0374	/*  ISA Rec DMA channel */
+-#define PP_ISASOF 0x0026	/*  ISA DMA offset */
+-#define PP_DmaFrameCnt 0x0028	/*  ISA DMA Frame count */
+-#define PP_DmaByteCnt 0x002A	/*  ISA DMA Byte count */
+-#define PP_CS8900_ISAMemB 0x002C	/*  Memory base */
+-#define PP_CS8920_ISAMemB 0x0348 /*  */
+-
+-#define PP_ISABootBase 0x0030	/*  Boot Prom base  */
+-#define PP_ISABootMask 0x0034	/*  Boot Prom Mask */
+-
+-/* EEPROM data and command registers */
+-#define PP_EECMD 0x0040		/*  NVR Interface Command register */
+-#define PP_EEData 0x0042	/*  NVR Interface Data Register */
+-#define PP_DebugReg 0x0044	/*  Debug Register */
+-
+-#define PP_RxCFG 0x0102		/*  Rx Bus config */
+-#define PP_RxCTL 0x0104		/*  Receive Control Register */
+-#define PP_TxCFG 0x0106		/*  Transmit Config Register */
+-#define PP_TxCMD 0x0108		/*  Transmit Command Register */
+-#define PP_BufCFG 0x010A	/*  Bus configuration Register */
+-#define PP_LineCTL 0x0112	/*  Line Config Register */
+-#define PP_SelfCTL 0x0114	/*  Self Command Register */
+-#define PP_BusCTL 0x0116	/*  ISA bus control Register */
+-#define PP_TestCTL 0x0118	/*  Test Register */
+-#define PP_AutoNegCTL 0x011C	/*  Auto Negotiation Ctrl */
+-
+-#define PP_ISQ 0x0120		/*  Interrupt Status */
+-#define PP_RxEvent 0x0124	/*  Rx Event Register */
+-#define PP_TxEvent 0x0128	/*  Tx Event Register */
+-#define PP_BufEvent 0x012C	/*  Bus Event Register */
+-#define PP_RxMiss 0x0130	/*  Receive Miss Count */
+-#define PP_TxCol 0x0132		/*  Transmit Collision Count */
+-#define PP_LineST 0x0134	/*  Line State Register */
+-#define PP_SelfST 0x0136	/*  Self State register */
+-#define PP_BusST 0x0138		/*  Bus Status */
+-#define PP_TDR 0x013C		/*  Time Domain Reflectometry */
+-#define PP_AutoNegST 0x013E	/*  Auto Neg Status */
+-#define PP_TxCommand 0x0144	/*  Tx Command */
+-#define PP_TxLength 0x0146	/*  Tx Length */
+-#define PP_LAF 0x0150		/*  Hash Table */
+-#define PP_IA 0x0158		/*  Physical Address Register */
+-
+-#define PP_RxStatus 0x0400	/*  Receive start of frame */
+-#define PP_RxLength 0x0402	/*  Receive Length of frame */
+-#define PP_RxFrame 0x0404	/*  Receive frame pointer */
+-#define PP_TxFrame 0x0A00	/*  Transmit frame pointer */
+-
+-/*  Primary I/O Base Address. If no I/O base is supplied by the user, then this */
+-/*  can be used as the default I/O base to access the PacketPage Area. */
+-#define DEFAULTIOBASE 0x0300
+-#define FIRST_IO 0x020C		/*  First I/O port to check */
+-#define LAST_IO 0x037C		/*  Last I/O port to check (+10h) */
+-#define ADD_MASK 0x3000		/*  Mask it use of the ADD_PORT register */
+-#define ADD_SIG 0x3000		/*  Expected ID signature */
+-
+-#define CHIP_EISA_ID_SIG 0x630E   /*  Product ID Code for Crystal Chip (CS8900 spec 4.3) */
+-
+-#ifdef	IBMEIPKT
+-#define EISA_ID_SIG 0x4D24	/*  IBM */
+-#define PART_NO_SIG 0x1010	/*  IBM */
+-#define MONGOOSE_BIT 0x0000	/*  IBM */
+-#else
+-#define EISA_ID_SIG 0x630E	/*  PnP Vendor ID (same as chip id for Crystal board) */
+-#define PART_NO_SIG 0x4000	/*  ID code CS8920 board (PnP Vendor Product code) */
+-#define MONGOOSE_BIT 0x2000	/*  PART_NO_SIG + MONGOOSE_BUT => ID of mongoose */
+-#endif
+-
+-#define PRODUCT_ID_ADD 0x0002   /*  Address of product ID */
+-
+-/*  Mask to find out the types of  registers */
+-#define REG_TYPE_MASK 0x001F
+-
+-/*  Eeprom Commands */
+-#define ERSE_WR_ENBL 0x00F0
+-#define ERSE_WR_DISABLE 0x0000
+-
+-/*  Defines Control/Config register quintuplet numbers */
+-#define RX_BUF_CFG 0x0003
+-#define RX_CONTROL 0x0005
+-#define TX_CFG 0x0007
+-#define TX_COMMAND 0x0009
+-#define BUF_CFG 0x000B
+-#define LINE_CONTROL 0x0013
+-#define SELF_CONTROL 0x0015
+-#define BUS_CONTROL 0x0017
+-#define TEST_CONTROL 0x0019
+-
+-/*  Defines Status/Count registers quintuplet numbers */
+-#define RX_EVENT 0x0004
+-#define TX_EVENT 0x0008
+-#define BUF_EVENT 0x000C
+-#define RX_MISS_COUNT 0x0010
+-#define TX_COL_COUNT 0x0012
+-#define LINE_STATUS 0x0014
+-#define SELF_STATUS 0x0016
+-#define BUS_STATUS 0x0018
+-#define TDR 0x001C
+-
+-/* PP_RxCFG - Receive  Configuration and Interrupt Mask bit definition -  Read/write */
+-#define SKIP_1 0x0040
+-#define RX_STREAM_ENBL 0x0080
+-#define RX_OK_ENBL 0x0100
+-#define RX_DMA_ONLY 0x0200
+-#define AUTO_RX_DMA 0x0400
+-#define BUFFER_CRC 0x0800
+-#define RX_CRC_ERROR_ENBL 0x1000
+-#define RX_RUNT_ENBL 0x2000
+-#define RX_EXTRA_DATA_ENBL 0x4000
+-
+-/* PP_RxCTL - Receive Control bit definition - Read/write */
+-#define RX_IA_HASH_ACCEPT 0x0040
+-#define RX_PROM_ACCEPT 0x0080
+-#define RX_OK_ACCEPT 0x0100
+-#define RX_MULTCAST_ACCEPT 0x0200
+-#define RX_IA_ACCEPT 0x0400
+-#define RX_BROADCAST_ACCEPT 0x0800
+-#define RX_BAD_CRC_ACCEPT 0x1000
+-#define RX_RUNT_ACCEPT 0x2000
+-#define RX_EXTRA_DATA_ACCEPT 0x4000
+-#define RX_ALL_ACCEPT (RX_PROM_ACCEPT|RX_BAD_CRC_ACCEPT|RX_RUNT_ACCEPT|RX_EXTRA_DATA_ACCEPT)
+-/*  Default receive mode - individually addressed, broadcast, and error free */
+-#define DEF_RX_ACCEPT (RX_IA_ACCEPT | RX_BROADCAST_ACCEPT | RX_OK_ACCEPT)
+-
+-/* PP_TxCFG - Transmit Configuration Interrupt Mask bit definition - Read/write */
+-#define TX_LOST_CRS_ENBL 0x0040
+-#define TX_SQE_ERROR_ENBL 0x0080
+-#define TX_OK_ENBL 0x0100
+-#define TX_LATE_COL_ENBL 0x0200
+-#define TX_JBR_ENBL 0x0400
+-#define TX_ANY_COL_ENBL 0x0800
+-#define TX_16_COL_ENBL 0x8000
+-
+-/* PP_TxCMD - Transmit Command bit definition - Read-only */
+-#define TX_START_4_BYTES 0x0000
+-#define TX_START_64_BYTES 0x0040
+-#define TX_START_128_BYTES 0x0080
+-#define TX_START_ALL_BYTES 0x00C0
+-#define TX_FORCE 0x0100
+-#define TX_ONE_COL 0x0200
+-#define TX_TWO_PART_DEFF_DISABLE 0x0400
+-#define TX_NO_CRC 0x1000
+-#define TX_RUNT 0x2000
+-
+-/* PP_BufCFG - Buffer Configuration Interrupt Mask bit definition - Read/write */
+-#define GENERATE_SW_INTERRUPT 0x0040
+-#define RX_DMA_ENBL 0x0080
+-#define READY_FOR_TX_ENBL 0x0100
+-#define TX_UNDERRUN_ENBL 0x0200
+-#define RX_MISS_ENBL 0x0400
+-#define RX_128_BYTE_ENBL 0x0800
+-#define TX_COL_COUNT_OVRFLOW_ENBL 0x1000
+-#define RX_MISS_COUNT_OVRFLOW_ENBL 0x2000
+-#define RX_DEST_MATCH_ENBL 0x8000
+-
+-/* PP_LineCTL - Line Control bit definition - Read/write */
+-#define SERIAL_RX_ON 0x0040
+-#define SERIAL_TX_ON 0x0080
+-#define AUI_ONLY 0x0100
+-#define AUTO_AUI_10BASET 0x0200
+-#define MODIFIED_BACKOFF 0x0800
+-#define NO_AUTO_POLARITY 0x1000
+-#define TWO_PART_DEFDIS 0x2000
+-#define LOW_RX_SQUELCH 0x4000
+-
+-/* PP_SelfCTL - Software Self Control bit definition - Read/write */
+-#define POWER_ON_RESET 0x0040
+-#define SW_STOP 0x0100
+-#define SLEEP_ON 0x0200
+-#define AUTO_WAKEUP 0x0400
+-#define HCB0_ENBL 0x1000
+-#define HCB1_ENBL 0x2000
+-#define HCB0 0x4000
+-#define HCB1 0x8000
+-
+-/* PP_BusCTL - ISA Bus Control bit definition - Read/write */
+-#define RESET_RX_DMA 0x0040
+-#define MEMORY_ON 0x0400
+-#define DMA_BURST_MODE 0x0800
+-#define IO_CHANNEL_READY_ON 0x1000
+-#define RX_DMA_SIZE_64K 0x2000
+-#define ENABLE_IRQ 0x8000
+-
+-/* PP_TestCTL - Test Control bit definition - Read/write */
+-#define LINK_OFF 0x0080
+-#define ENDEC_LOOPBACK 0x0200
+-#define AUI_LOOPBACK 0x0400
+-#define BACKOFF_OFF 0x0800
+-#define FAST_TEST 0x8000
+-
+-/* PP_RxEvent - Receive Event Bit definition - Read-only */
+-#define RX_IA_HASHED 0x0040
+-#define RX_DRIBBLE 0x0080
+-#define RX_OK 0x0100
+-#define RX_HASHED 0x0200
+-#define RX_IA 0x0400
+-#define RX_BROADCAST 0x0800
+-#define RX_CRC_ERROR 0x1000
+-#define RX_RUNT 0x2000
+-#define RX_EXTRA_DATA 0x4000
+-
+-#define HASH_INDEX_MASK 0x0FC00
+-
+-/* PP_TxEvent - Transmit Event Bit definition - Read-only */
+-#define TX_LOST_CRS 0x0040
+-#define TX_SQE_ERROR 0x0080
+-#define TX_OK 0x0100
+-#define TX_LATE_COL 0x0200
+-#define TX_JBR 0x0400
+-#define TX_16_COL 0x8000
+-#define TX_SEND_OK_BITS (TX_OK|TX_LOST_CRS)
+-#define TX_COL_COUNT_MASK 0x7800
+-
+-/* PP_BufEvent - Buffer Event Bit definition - Read-only */
+-#define SW_INTERRUPT 0x0040
+-#define RX_DMA 0x0080
+-#define READY_FOR_TX 0x0100
+-#define TX_UNDERRUN 0x0200
+-#define RX_MISS 0x0400
+-#define RX_128_BYTE 0x0800
+-#define TX_COL_OVRFLW 0x1000
+-#define RX_MISS_OVRFLW 0x2000
+-#define RX_DEST_MATCH 0x8000
+-
+-/* PP_LineST - Ethernet Line Status bit definition - Read-only */
+-#define LINK_OK 0x0080
+-#define AUI_ON 0x0100
+-#define TENBASET_ON 0x0200
+-#define POLARITY_OK 0x1000
+-#define CRS_OK 0x4000
+-
+-/* PP_SelfST - Chip Software Status bit definition */
+-#define ACTIVE_33V 0x0040
+-#define INIT_DONE 0x0080
+-#define SI_BUSY 0x0100
+-#define EEPROM_PRESENT 0x0200
+-#define EEPROM_OK 0x0400
+-#define EL_PRESENT 0x0800
+-#define EE_SIZE_64 0x1000
+-
+-/* PP_BusST - ISA Bus Status bit definition */
+-#define TX_BID_ERROR 0x0080
+-#define READY_FOR_TX_NOW 0x0100
+-
+-/* PP_AutoNegCTL - Auto Negotiation Control bit definition */
+-#define RE_NEG_NOW 0x0040
+-#define ALLOW_FDX 0x0080
+-#define AUTO_NEG_ENABLE 0x0100
+-#define NLP_ENABLE 0x0200
+-#define FORCE_FDX 0x8000
+-#define AUTO_NEG_BITS (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE)
+-#define AUTO_NEG_MASK (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE|ALLOW_FDX|RE_NEG_NOW)
+-
+-/* PP_AutoNegST - Auto Negotiation Status bit definition */
+-#define AUTO_NEG_BUSY 0x0080
+-#define FLP_LINK 0x0100
+-#define FLP_LINK_GOOD 0x0800
+-#define LINK_FAULT 0x1000
+-#define HDX_ACTIVE 0x4000
+-#define FDX_ACTIVE 0x8000
+-
+-/*  The following block defines the ISQ event types */
+-#define ISQ_RECEIVER_EVENT 0x04
+-#define ISQ_TRANSMITTER_EVENT 0x08
+-#define ISQ_BUFFER_EVENT 0x0c
+-#define ISQ_RX_MISS_EVENT 0x10
+-#define ISQ_TX_COL_EVENT 0x12
+-
+-#define ISQ_EVENT_MASK 0x003F   /*  ISQ mask to find out type of event */
+-#define ISQ_HIST 16		/*  small history buffer */
+-#define AUTOINCREMENT 0x8000	/*  Bit mask to set bit-15 for autoincrement */
+-
+-#define TXRXBUFSIZE 0x0600
+-#define RXDMABUFSIZE 0x8000
+-#define RXDMASIZE 0x4000
+-#define TXRX_LENGTH_MASK 0x07FF
+-
+-/*  rx options bits */
+-#define RCV_WITH_RXON	1       /*  Set SerRx ON */
+-#define RCV_COUNTS	2       /*  Use Framecnt1 */
+-#define RCV_PONG	4       /*  Pong respondent */
+-#define RCV_DONG	8       /*  Dong operation */
+-#define RCV_POLLING	0x10	/*  Poll RxEvent */
+-#define RCV_ISQ		0x20	/*  Use ISQ, int */
+-#define RCV_AUTO_DMA	0x100	/*  Set AutoRxDMAE */
+-#define RCV_DMA		0x200	/*  Set RxDMA only */
+-#define RCV_DMA_ALL	0x400	/*  Copy all DMA'ed */
+-#define RCV_FIXED_DATA	0x800	/*  Every frame same */
+-#define RCV_IO		0x1000	/*  Use ISA IO only */
+-#define RCV_MEMORY	0x2000	/*  Use ISA Memory */
+-
+-#define RAM_SIZE	0x1000       /*  The card has 4k bytes or RAM */
+-#define PKT_START PP_TxFrame  /*  Start of packet RAM */
+-
+-#define RX_FRAME_PORT	0x0000
+-#define TX_FRAME_PORT RX_FRAME_PORT
+-#define TX_CMD_PORT	0x0004
+-#define TX_NOW		0x0000       /*  Tx packet after   5 bytes copied */
+-#define TX_AFTER_381	0x0020       /*  Tx packet after 381 bytes copied */
+-#define TX_AFTER_ALL	0x0060       /*  Tx packet after all bytes copied */
+-#define TX_LEN_PORT	0x0006
+-#define ISQ_PORT	0x0008
+-#define ADD_PORT	0x000A
+-#define DATA_PORT	0x000C
+-
+-#define EEPROM_WRITE_EN		0x00F0
+-#define EEPROM_WRITE_DIS	0x0000
+-#define EEPROM_WRITE_CMD	0x0100
+-#define EEPROM_READ_CMD		0x0200
+-
+-/*  Receive Header */
+-/*  Description of header of each packet in receive area of memory */
+-#define RBUF_EVENT_LOW	0   /*  Low byte of RxEvent - status of received frame */
+-#define RBUF_EVENT_HIGH	1   /*  High byte of RxEvent - status of received frame */
+-#define RBUF_LEN_LOW	2   /*  Length of received data - low byte */
+-#define RBUF_LEN_HI	3   /*  Length of received data - high byte */
+-#define RBUF_HEAD_LEN	4   /*  Length of this header */
+-
+-#define CHIP_READ 0x1   /*  Used to mark state of the repins code (chip or dma) */
+-#define DMA_READ 0x2   /*  Used to mark state of the repins code (chip or dma) */
+-
+-/*  for bios scan */
+-/*  */
+-#ifdef	CSDEBUG
+-/*  use these values for debugging bios scan */
+-#define BIOS_START_SEG 0x00000
+-#define BIOS_OFFSET_INC 0x0010
+-#else
+-#define BIOS_START_SEG 0x0c000
+-#define BIOS_OFFSET_INC 0x0200
+-#endif
+-
+-#define BIOS_LAST_OFFSET 0x0fc00
+-
+-/*  Byte offsets into the EEPROM configuration buffer */
+-#define ISA_CNF_OFFSET 0x6
+-#define TX_CTL_OFFSET (ISA_CNF_OFFSET + 8)			/*  8900 eeprom */
+-#define AUTO_NEG_CNF_OFFSET (ISA_CNF_OFFSET + 8)		/*  8920 eeprom */
+-
+-  /*  the assumption here is that the bits in the eeprom are generally  */
+-  /*  in the same position as those in the autonegctl register. */
+-  /*  Of course the IMM bit is not in that register so it must be  */
+-  /*  masked out */
+-#define EE_FORCE_FDX  0x8000
+-#define EE_NLP_ENABLE 0x0200
+-#define EE_AUTO_NEG_ENABLE 0x0100
+-#define EE_ALLOW_FDX 0x0080
+-#define EE_AUTO_NEG_CNF_MASK (EE_FORCE_FDX|EE_NLP_ENABLE|EE_AUTO_NEG_ENABLE|EE_ALLOW_FDX)
+-
+-#define IMM_BIT 0x0040		/*  ignore missing media */
+-
+-#define ADAPTER_CNF_OFFSET (AUTO_NEG_CNF_OFFSET + 2)
+-#define A_CNF_10B_T 0x0001
+-#define A_CNF_AUI 0x0002
+-#define A_CNF_10B_2 0x0004
+-#define A_CNF_MEDIA_TYPE 0x0060
+-#define A_CNF_MEDIA_AUTO 0x0000
+-#define A_CNF_MEDIA_10B_T 0x0020
+-#define A_CNF_MEDIA_AUI 0x0040
+-#define A_CNF_MEDIA_10B_2 0x0060
+-#define A_CNF_DC_DC_POLARITY 0x0080
+-#define A_CNF_NO_AUTO_POLARITY 0x2000
+-#define A_CNF_LOW_RX_SQUELCH 0x4000
+-#define A_CNF_EXTND_10B_2 0x8000
+-
+-#define PACKET_PAGE_OFFSET 0x8
+-
+-/*  Bit definitions for the ISA configuration word from the EEPROM */
+-#define INT_NO_MASK 0x000F
+-#define DMA_NO_MASK 0x0070
+-#define ISA_DMA_SIZE 0x0200
+-#define ISA_AUTO_RxDMA 0x0400
+-#define ISA_RxDMA 0x0800
+-#define DMA_BURST 0x1000
+-#define STREAM_TRANSFER 0x2000
+-#define ANY_ISA_DMA (ISA_AUTO_RxDMA | ISA_RxDMA)
+-
+-/*  DMA controller registers */
+-#define DMA_BASE 0x00     /*  DMA controller base */
+-#define DMA_BASE_2 0x0C0    /*  DMA controller base */
+-
+-#define DMA_STAT 0x0D0    /*  DMA controller status register */
+-#define DMA_MASK 0x0D4    /*  DMA controller mask register */
+-#define DMA_MODE 0x0D6    /*  DMA controller mode register */
+-#define DMA_RESETFF 0x0D8    /*  DMA controller first/last flip flop */
+-
+-/*  DMA data */
+-#define DMA_DISABLE 0x04     /*  Disable channel n */
+-#define DMA_ENABLE 0x00     /*  Enable channel n */
+-/*  Demand transfers, incr. address, auto init, writes, ch. n */
+-#define DMA_RX_MODE 0x14
+-/*  Demand transfers, incr. address, auto init, reads, ch. n */
+-#define DMA_TX_MODE 0x18
+-
+-#define DMA_SIZE (16*1024) /*  Size of dma buffer - 16k */
+-
+-#define CS8900 0x0000
+-#define CS8920 0x4000
+-#define CS8920M 0x6000
+-#define REVISON_BITS 0x1F00
+-#define EEVER_NUMBER 0x12
+-#define CHKSUM_LEN 0x14
+-#define CHKSUM_VAL 0x0000
+-#define START_EEPROM_DATA 0x001c /*  Offset into eeprom for start of data */
+-#define IRQ_MAP_EEPROM_DATA 0x0046 /*  Offset into eeprom for the IRQ map */
+-#define IRQ_MAP_LEN 0x0004 /*  No of bytes to read for the IRQ map */
+-#define PNP_IRQ_FRMT 0x0022 /*  PNP small item IRQ format */
+-#define CS8900_IRQ_MAP 0x1c20 /*  This IRQ map is fixed */
+-
+-#define CS8920_NO_INTS 0x0F   /*  Max CS8920 interrupt select # */
+-
+-#define PNP_ADD_PORT 0x0279
+-#define PNP_WRITE_PORT 0x0A79
+-
+-#define GET_PNP_ISA_STRUCT 0x40
+-#define PNP_ISA_STRUCT_LEN 0x06
+-#define PNP_CSN_CNT_OFF 0x01
+-#define PNP_RD_PORT_OFF 0x02
+-#define PNP_FUNCTION_OK 0x00
+-#define PNP_WAKE 0x03
+-#define PNP_RSRC_DATA 0x04
+-#define PNP_RSRC_READY 0x01
+-#define PNP_STATUS 0x05
+-#define PNP_ACTIVATE 0x30
+-#define PNP_CNF_IO_H 0x60
+-#define PNP_CNF_IO_L 0x61
+-#define PNP_CNF_INT 0x70
+-#define PNP_CNF_DMA 0x74
+-#define PNP_CNF_MEM 0x48
+-
+-#define BIT0 1
+-#define BIT15 0x8000
+-
+-/*
+- * Local variables:
+- *  c-basic-offset: 8
+- * End:
+- */
+-
+diff -Naur grub-0.97.orig/netboot/cs89x0.txt grub-0.97/netboot/cs89x0.txt
+--- grub-0.97.orig/netboot/cs89x0.txt	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/cs89x0.txt	1970-01-01 00:00:00.000000000 +0000
+@@ -1,26 +0,0 @@
+-Permission is granted to distribute the enclosed cs89x0.[ch] driver
+-only in conjunction with the Etherboot package.  The code is
+-ordinarily distributed under the GPL.
+-
+-Russ Nelson, January 2000
+-
+-CREDITS
+-
+-I want to thank
+-
+-  Mike Cruse <mcruse@cti-ltd.com>
+-     for providing an evaluation NIC and for sponsoring the
+-     development of this driver.
+-
+-  Randall Sears <sears@crystal.cirrus.com>
+-  Deva Bodas <bodas@crystal.cirrus.com>
+-  Andreas Kraemer <akraemer@crystal.cirrus.com>
+-  Wolfgang Krause <100303.2673@compuserve.com>
+-     for excellent technical support and for providing the required
+-     programming information. I appreciate Crystal Semiconductor's
+-     commitment towards free software.
+-
+-  Russell Nelson <nelson@crynwr.com>
+-     for writing the Linux device driver for the CS89x0
+-     chipset. Russel's code is very well designed and simplified my
+-     job a lot.
+diff -Naur grub-0.97.orig/netboot/davicom.c grub-0.97/netboot/davicom.c
+--- grub-0.97.orig/netboot/davicom.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/davicom.c	2005-08-31 19:03:35.000000000 +0000
+@@ -1,12 +1,12 @@
++#ifdef ALLMULTI
++#error multicast support is not yet implemented
++#endif
+ /*  
+     DAVICOM DM9009/DM9102/DM9102A Etherboot Driver	V1.00
+ 
+-    This driver was ported from Marty Conner's Tulip Etherboot driver. 
+-    Thanks Marty Connor (mdc@thinguin.org) 
+-    You can get Tulip driver source file from this URL:
++    This driver was ported from Marty Connor's Tulip Etherboot driver. 
++    Thanks Marty Connor (mdc@etherboot.org) 
+ 
+-    "http://etherboot.sourceforge..net/#Distribution"
+-    
+     This davicom etherboot driver supports DM9009/DM9102/DM9102A/
+     DM9102A+DM9801/DM9102A+DM9802 NICs.
+ 
+@@ -36,7 +36,6 @@
+ 			register(CR6)
+ */
+ 
+-
+ /*********************************************************************/
+ /* Declarations                                                      */
+ /*********************************************************************/
+@@ -44,7 +43,6 @@
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ 
+ #undef DAVICOM_DEBUG
+ #undef DAVICOM_DEBUG_WHERE
+@@ -99,8 +97,10 @@
+ #define eeprom_delay()  inl(ee_addr)
+ 
+ /* helpful macro if on a big_endian machine for changing byte order.
+-   not strictly needed on Intel */
++   not strictly needed on Intel
++   Already defined in Etherboot includes
+ #define le16_to_cpu(val) (val)
++*/
+ 
+ /* transmit and receive descriptor format */
+ struct txdesc {
+@@ -138,20 +138,12 @@
+ /* transmit descriptor and buffer */
+ #define NTXD 2
+ static struct txdesc txd[NTXD] __attribute__ ((aligned(4)));
+-#ifdef	USE_LOWMEM_BUFFER
+-#define txb ((char *)0x10000 - BUFLEN)
+-#else
+ static unsigned char txb[BUFLEN] __attribute__ ((aligned(4)));
+-#endif
+ 
+ /* receive descriptor(s) and buffer(s) */
+ #define NRXD 4
+ static struct rxdesc rxd[NRXD] __attribute__ ((aligned(4)));
+-#ifdef	USE_LOWMEM_BUFFER
+-#define rxb ((char *)0x10000 - NRXD * BUFLEN - BUFLEN)
+-#else
+ static unsigned char rxb[NRXD * BUFLEN] __attribute__ ((aligned(4)));
+-#endif
+ static int rxd_tail;
+ static int TxPtr;
+ 
+@@ -161,15 +153,13 @@
+ /*********************************************************************/
+ static void whereami(const char *str);
+ static int read_eeprom(unsigned long ioaddr, int location, int addr_len);
+-struct nic *davicom_probe(struct nic *nic, unsigned short *io_addrs,
+-			struct pci_device *pci);
++static int davicom_probe(struct dev *dev, struct pci_device *pci);
+ static void davicom_init_chain(struct nic *nic);	/* Sten 10/9 */
+ static void davicom_reset(struct nic *nic);
+ static void davicom_transmit(struct nic *nic, const char *d, unsigned int t,
+ 			   unsigned int s, const char *p);
+-static int davicom_poll(struct nic *nic);
+-static void davicom_disable(struct nic *nic);
+-static void whereami (const char *str);
++static int davicom_poll(struct nic *nic, int retrieve);
++static void davicom_disable(struct dev *dev);
+ #ifdef	DAVICOM_DEBUG
+ static void davicom_more(void);
+ #endif /* DAVICOM_DEBUG */
+@@ -184,13 +174,10 @@
+ /*********************************************************************/
+ /* Utility Routines                                                  */
+ /*********************************************************************/
+-
+-static inline void whereami (const char *str)
++static inline void whereami(const char *str)
+ {
+-#ifdef	DAVICOM_DEBUG_WHERE
+   printf("%s\n", str);
+   /* sleep(2); */
+-#endif
+ }
+ 
+ #ifdef	DAVICOM_DEBUG
+@@ -360,7 +347,7 @@
+ /*
+   Sense media mode and set CR6
+ */
+-static void davicom_media_chk(struct nic * nic)
++static void davicom_media_chk(struct nic * nic __unused)
+ {
+   unsigned long to, csr6;
+ 
+@@ -446,8 +433,8 @@
+   /* Sten: Set 2 TX descriptor but use one TX buffer because
+ 	   it transmit a packet and wait complete every time. */
+   for (i=0; i<NTXD; i++) {
+-    txd[i].buf1addr = &txb[0];		/* Used same TX buffer */
+-    txd[i].buf2addr = (unsigned char *)&txd[i+1]; /*  Point to Next TX desc */
++    txd[i].buf1addr = (void *)virt_to_bus(&txb[0]);	/* Used same TX buffer */
++    txd[i].buf2addr = (void *)virt_to_bus(&txd[i+1]);	/*  Point to Next TX desc */
+     txd[i].buf1sz   = 0;
+     txd[i].buf2sz   = 0;
+     txd[i].control  = 0x184;           /* Begin/End/Chain */
+@@ -466,8 +453,8 @@
+ 
+   /* setup receive descriptor */
+   for (i=0; i<NRXD; i++) {
+-    rxd[i].buf1addr = &rxb[i * BUFLEN];
+-    rxd[i].buf2addr = (unsigned char *)&rxd[i+1]; /* Point to Next RX desc */
++    rxd[i].buf1addr = (void *)virt_to_bus(&rxb[i * BUFLEN]);
++    rxd[i].buf2addr = (void *)virt_to_bus(&rxd[i+1]); /* Point to Next RX desc */
+     rxd[i].buf1sz   = BUFLEN;
+     rxd[i].buf2sz   = 0;        /* not used */
+     rxd[i].control  = 0x4;		/* Chain Structure */
+@@ -475,8 +462,8 @@
+   }
+ 
+   /* Chain the last descriptor to first */
+-  txd[NTXD - 1].buf2addr = (unsigned char *)&txd[0];
+-  rxd[NRXD - 1].buf2addr = (unsigned char *)&rxd[0];
++  txd[NTXD - 1].buf2addr = (void *)virt_to_bus(&txd[0]);
++  rxd[NRXD - 1].buf2addr = (void *)virt_to_bus(&rxd[0]);
+   TxPtr = 0;
+   rxd_tail = 0;
+ }
+@@ -488,7 +475,6 @@
+ static void davicom_reset(struct nic *nic)
+ {
+   unsigned long to;
+-  u32 addr_low, addr_high;
+ 
+   whereami("davicom_reset\n");
+ 
+@@ -507,8 +493,8 @@
+   davicom_init_chain(nic);	/* Sten 10/9 */
+ 
+   /* Point to receive descriptor */
+-  outl((unsigned long)&rxd[0], ioaddr + CSR3);
+-  outl((unsigned long)&txd[0], ioaddr + CSR4);	/* Sten 10/9 */
++  outl(virt_to_bus(&rxd[0]), ioaddr + CSR3);
++  outl(virt_to_bus(&txd[0]), ioaddr + CSR4);	/* Sten 10/9 */
+ 
+   /* According phyxcer media mode to set CR6,
+      DM9102/A phyxcer can auto-detect media mode */
+@@ -591,13 +577,15 @@
+ /*********************************************************************/
+ /* eth_poll - Wait for a frame                                       */
+ /*********************************************************************/
+-static int davicom_poll(struct nic *nic)
++static int davicom_poll(struct nic *nic, int retrieve)
+ {
+   whereami("davicom_poll\n");
+ 
+   if (rxd[rxd_tail].status & 0x80000000)
+     return 0;
+ 
++  if ( ! retrieve ) return 1;
++
+   whereami("davicom_poll got one\n");
+ 
+   nic->packetlen = (rxd[rxd_tail].status & 0x3FFF0000) >> 16;
+@@ -627,10 +615,13 @@
+ /*********************************************************************/
+ /* eth_disable - Disable the interface                               */
+ /*********************************************************************/
+-static void davicom_disable(struct nic *nic)
++static void davicom_disable(struct dev *dev)
+ {
++  struct nic *nic = (struct nic *)dev;
+   whereami("davicom_disable\n");
+ 
++  davicom_reset(nic);
++
+   /* disable interrupts */
+   outl(0x00000000, ioaddr + CSR7);
+ 
+@@ -640,24 +631,43 @@
+   /* Clear the missed-packet counter. */
+   (volatile unsigned long)inl(ioaddr + CSR8);
+ }
++
++
++/*********************************************************************/
++/* eth_irq - enable, disable and force interrupts                    */
++/*********************************************************************/
++static void davicom_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
+ 
+ /*********************************************************************/
+ /* eth_probe - Look for an adapter                                   */
+ /*********************************************************************/
+-struct nic *davicom_probe(struct nic *nic, unsigned short *io_addrs,
+-                          struct pci_device *pci)
++static int davicom_probe(struct dev *dev, struct pci_device *pci)
+ {
++  struct nic *nic = (struct nic *)dev;
+   unsigned int i;
+-  u32 l1, l2;
+ 
+   whereami("davicom_probe\n");
+ 
+-  if (io_addrs == 0 || *io_addrs == 0)
++  if (pci->ioaddr == 0)
+     return 0;
+ 
+   vendor  = pci->vendor;
+   dev_id  = pci->dev_id;
+-  ioaddr  = *io_addrs;
++  ioaddr  = pci->ioaddr & ~3;
++
++  nic->irqno  = 0;
++  nic->ioaddr = pci->ioaddr & ~3;
+ 
+   /* wakeup chip */
+   pcibios_write_config_dword(pci->bus, pci->devfn, 0x40, 0x00000000);
+@@ -683,10 +693,26 @@
+   /* initialize device */
+   davicom_reset(nic);
+ 
+-  nic->reset    = davicom_reset;
++  dev->disable  = davicom_disable;
+   nic->poll     = davicom_poll;
+   nic->transmit = davicom_transmit;
+-  nic->disable  = davicom_disable;
++  nic->irq      = davicom_irq;
+ 
+-  return nic;
++  return 1;
+ }
++
++static struct pci_id davicom_nics[] = {
++PCI_ROM(0x1282, 0x9100, "davicom9100", "Davicom 9100"),
++PCI_ROM(0x1282, 0x9102, "davicom9102", "Davicom 9102"),
++PCI_ROM(0x1282, 0x9009, "davicom9009", "Davicom 9009"),
++PCI_ROM(0x1282, 0x9132, "davicom9132", "Davicom 9132"),	/* Needs probably some fixing */
++};
++
++struct pci_driver davicom_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "DAVICOM",
++	.probe    = davicom_probe,
++	.ids      = davicom_nics,
++	.id_count = sizeof(davicom_nics)/sizeof(davicom_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/depca.c grub-0.97/netboot/depca.c
+--- grub-0.97.orig/netboot/depca.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/depca.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,752 +0,0 @@
+-/* Etherboot: depca.h merged, comments from Linux driver retained */
+-/*  depca.c: A DIGITAL DEPCA  & EtherWORKS ethernet driver for linux.
+-
+-    Written 1994, 1995 by David C. Davies.
+-
+-
+-                      Copyright 1994 David C. Davies
+-		                   and 
+-			 United States Government
+-	 (as represented by the Director, National Security Agency).  
+-
+-               Copyright 1995  Digital Equipment Corporation.
+-
+-
+-    This software may be used and distributed according to the terms of
+-    the GNU Public License, incorporated herein by reference.
+-
+-    This driver is written for the Digital Equipment Corporation series
+-    of DEPCA and EtherWORKS ethernet cards:
+-
+-        DEPCA       (the original)
+-    	DE100
+-    	DE101
+-	DE200 Turbo
+-	DE201 Turbo
+-	DE202 Turbo (TP BNC)
+-	DE210
+-	DE422       (EISA)
+-
+-    The  driver has been tested on DE100, DE200 and DE202 cards  in  a
+-    relatively busy network. The DE422 has been tested a little.
+-
+-    This  driver will NOT work   for the DE203,  DE204  and DE205 series  of
+-    cards,  since they have  a  new custom ASIC in   place of the AMD  LANCE
+-    chip.  See the 'ewrk3.c'   driver in the  Linux  source tree for running
+-    those cards.
+-
+-    I have benchmarked the driver with a  DE100 at 595kB/s to (542kB/s from)
+-    a DECstation 5000/200.
+-
+-    The author may be reached at davies@maniac.ultranet.com
+-
+-    =========================================================================
+-
+-    The  driver was originally based  on   the 'lance.c' driver from  Donald
+-    Becker   which  is included with  the  standard  driver distribution for
+-    linux.  V0.4  is  a complete  re-write  with only  the kernel  interface
+-    remaining from the original code.
+-
+-    1) Lance.c code in /linux/drivers/net/
+-    2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook",
+-       AMD, 1992 [(800) 222-9323].
+-    3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)",
+-       AMD, Pub. #17881, May 1993.
+-    4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA",
+-       AMD, Pub. #16907, May 1992
+-    5) "DEC EtherWORKS LC Ethernet Controller Owners Manual",
+-       Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003
+-    6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual",
+-       Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003
+-    7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR
+-       Digital Equipment Corporation, 1989
+-    8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual",
+-       Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001
+-    
+-
+-    Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this
+-    driver.
+-
+-    The original DEPCA  card requires that the  ethernet ROM address counter
+-    be enabled to count and has an 8 bit NICSR.  The ROM counter enabling is
+-    only  done when a  0x08 is read as the  first address octet (to minimise
+-    the chances  of writing over some  other hardware's  I/O register).  The
+-    NICSR accesses   have been changed  to  byte accesses  for all the cards
+-    supported by this driver, since there is only one  useful bit in the MSB
+-    (remote boot timeout) and it  is not used.  Also, there  is a maximum of
+-    only 48kB network  RAM for this  card.  My thanks  to Torbjorn Lindh for
+-    help debugging all this (and holding my feet to  the fire until I got it
+-    right).
+-
+-    The DE200  series  boards have  on-board 64kB  RAM for  use  as a shared
+-    memory network  buffer. Only the DE100  cards make use  of a  2kB buffer
+-    mode which has not  been implemented in  this driver (only the 32kB  and
+-    64kB modes are supported [16kB/48kB for the original DEPCA]).
+-
+-    At the most only 2 DEPCA cards can  be supported on  the ISA bus because
+-    there is only provision  for two I/O base addresses  on each card (0x300
+-    and 0x200). The I/O address is detected by searching for a byte sequence
+-    in the Ethernet station address PROM at the expected I/O address for the
+-    Ethernet  PROM.   The shared memory  base   address  is 'autoprobed'  by
+-    looking  for the self  test PROM  and detecting the  card name.   When a
+-    second  DEPCA is  detected,  information  is   placed in the   base_addr
+-    variable of the  next device structure (which  is created if necessary),
+-    thus  enabling ethif_probe  initialization  for the device.  More than 2
+-    EISA cards can  be  supported, but  care will  be  needed assigning  the
+-    shared memory to ensure that each slot has the  correct IRQ, I/O address
+-    and shared memory address assigned.
+-
+-    ************************************************************************
+-
+-    NOTE: If you are using two  ISA DEPCAs, it is  important that you assign
+-    the base memory addresses correctly.   The  driver autoprobes I/O  0x300
+-    then 0x200.  The  base memory address for  the first device must be less
+-    than that of the second so that the auto probe will correctly assign the
+-    I/O and memory addresses on the same card.  I can't think of a way to do
+-    this unambiguously at the moment, since there is nothing on the cards to
+-    tie I/O and memory information together.
+-
+-    I am unable  to  test  2 cards   together for now,    so this  code   is
+-    unchecked. All reports, good or bad, are welcome.
+-
+-    ************************************************************************
+-
+-    The board IRQ   setting must be  at an  unused IRQ which  is auto-probed
+-    using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are
+-    {2,3,4,5,7}, whereas the  DE200 is at {5,9,10,11,15}.  Note that IRQ2 is
+-    really IRQ9 in machines with 16 IRQ lines.
+-
+-    No 16MB memory  limitation should exist with this  driver as DMA is  not
+-    used and the common memory area is in low memory on the network card (my
+-    current system has 20MB and I've not had problems yet).
+-
+-    The ability to load this driver as a loadable module has been added. To
+-    utilise this ability, you have to do <8 things:
+-
+-    0) have a copy of the loadable modules code installed on your system.
+-    1) copy depca.c from the  /linux/drivers/net directory to your favourite
+-    temporary directory.
+-    2) if you wish, edit the  source code near  line 1530 to reflect the I/O
+-    address and IRQ you're using (see also 5).
+-    3) compile  depca.c, but include -DMODULE in  the command line to ensure
+-    that the correct bits are compiled (see end of source code).
+-    4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
+-    kernel with the depca configuration turned off and reboot.
+-    5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100]
+-       [Alan Cox: Changed the code to allow command line irq/io assignments]
+-       [Dave Davies: Changed the code to allow command line mem/name
+-                                                                assignments]
+-    6) run the net startup bits for your eth?? interface manually 
+-    (usually /etc/rc.inet[12] at boot time). 
+-    7) enjoy!
+-
+-    Note that autoprobing is not allowed in loadable modules - the system is
+-    already up and running and you're messing with interrupts.
+-
+-    To unload a module, turn off the associated interface 
+-    'ifconfig eth?? down' then 'rmmod depca'.
+-
+-    To assign a base memory address for the shared memory  when running as a
+-    loadable module, see 5 above.  To include the adapter  name (if you have
+-    no PROM  but know the card name)  also see 5  above. Note that this last
+-    option  will not work  with kernel  built-in  depca's. 
+-
+-    The shared memory assignment for a loadable module  makes sense to avoid
+-    the 'memory autoprobe' picking the wrong shared memory  (for the case of
+-    2 depca's in a PC).
+-
+-    ************************************************************************
+-    Support for MCA EtherWORKS cards added 11-3-98.
+-    Verified to work with up to 2 DE212 cards in a system (although not
+-      fully stress-tested).  
+-
+-    Currently known bugs/limitations:
+-
+-    Note:  with the MCA stuff as a module, it trusts the MCA configuration,
+-           not the command line for IRQ and memory address.  You can
+-           specify them if you want, but it will throw your values out.
+-           You still have to pass the IO address it was configured as
+-           though.
+-
+-    ************************************************************************
+-    TO DO:
+-    ------
+-
+-
+-    Revision History
+-    ----------------
+-
+-    Version   Date        Description
+-  
+-      0.1     25-jan-94   Initial writing.
+-      0.2     27-jan-94   Added LANCE TX hardware buffer chaining.
+-      0.3      1-feb-94   Added multiple DEPCA support.
+-      0.31     4-feb-94   Added DE202 recognition.
+-      0.32    19-feb-94   Tidy up. Improve multi-DEPCA support.
+-      0.33    25-feb-94   Fix DEPCA ethernet ROM counter enable.
+-                          Add jabber packet fix from murf@perftech.com
+-			  and becker@super.org
+-      0.34     7-mar-94   Fix DEPCA max network memory RAM & NICSR access.
+-      0.35     8-mar-94   Added DE201 recognition. Tidied up.
+-      0.351   30-apr-94   Added EISA support. Added DE422 recognition.
+-      0.36    16-may-94   DE422 fix released.
+-      0.37    22-jul-94   Added MODULE support
+-      0.38    15-aug-94   Added DBR ROM switch in depca_close(). 
+-                          Multi DEPCA bug fix.
+-      0.38axp 15-sep-94   Special version for Alpha AXP Linux V1.0.
+-      0.381   12-dec-94   Added DE101 recognition, fix multicast bug.
+-      0.382    9-feb-95   Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+-      0.383   22-feb-95   Fix for conflict with VESA SCSI reported by
+-                          <stromain@alf.dec.com>
+-      0.384   17-mar-95   Fix a ring full bug reported by <bkm@star.rl.ac.uk>
+-      0.385    3-apr-95   Fix a recognition bug reported by 
+-                                                <ryan.niemi@lastfrontier.com>
+-      0.386   21-apr-95   Fix the last fix...sorry, must be galloping senility
+-      0.40    25-May-95   Rewrite for portability & updated.
+-                          ALPHA support from <jestabro@amt.tay1.dec.com>
+-      0.41    26-Jun-95   Added verify_area() calls in depca_ioctl() from
+-                          suggestion by <heiko@colossus.escape.de>
+-      0.42    27-Dec-95   Add 'mem' shared memory assignment for loadable 
+-                          modules.
+-                          Add 'adapter_name' for loadable modules when no PROM.
+-			  Both above from a suggestion by 
+-			  <pchen@woodruffs121.residence.gatech.edu>.
+-			  Add new multicasting code.
+-      0.421   22-Apr-96	  Fix alloc_device() bug <jari@markkus2.fimr.fi>
+-      0.422   29-Apr-96	  Fix depca_hw_init() bug <jari@markkus2.fimr.fi>
+-      0.423    7-Jun-96   Fix module load bug <kmg@barco.be>
+-      0.43    16-Aug-96   Update alloc_device() to conform to de4x5.c
+-      0.44     1-Sep-97   Fix *_probe() to test check_region() first - bug
+-                           reported by <mmogilvi@elbert.uccs.edu>
+-      0.45     3-Nov-98   Added support for MCA EtherWORKS (DE210/DE212) cards
+-                           by <tymm@computer.org> 
+-      0.451    5-Nov-98   Fixed mca stuff cuz I'm a dummy. <tymm@computer.org>
+-      0.5     14-Nov-98   Re-spin for 2.1.x kernels.
+-      0.51    27-Jun-99   Correct received packet length for CRC from
+-                           report by <worm@dkik.dk>
+-
+-    =========================================================================
+-*/
+-
+-#include "etherboot.h"
+-#include "nic.h"
+-#include "cards.h"
+-
+-/*
+-** I/O addresses. Note that the 2k buffer option is not supported in
+-** this driver.
+-*/
+-#define DEPCA_NICSR ioaddr+0x00   /* Network interface CSR */
+-#define DEPCA_RBI   ioaddr+0x02   /* RAM buffer index (2k buffer mode) */
+-#define DEPCA_DATA  ioaddr+0x04   /* LANCE registers' data port */
+-#define DEPCA_ADDR  ioaddr+0x06   /* LANCE registers' address port */
+-#define DEPCA_HBASE ioaddr+0x08   /* EISA high memory base address reg. */
+-#define DEPCA_PROM  ioaddr+0x0c   /* Ethernet address ROM data port */
+-#define DEPCA_CNFG  ioaddr+0x0c   /* EISA Configuration port */
+-#define DEPCA_RBSA  ioaddr+0x0e   /* RAM buffer starting address (2k buff.) */
+-
+-/*
+-** These are LANCE registers addressable through DEPCA_ADDR 
+-*/
+-#define CSR0       0
+-#define CSR1       1
+-#define CSR2       2
+-#define CSR3       3
+-
+-/* 
+-** NETWORK INTERFACE CSR (NI_CSR) bit definitions 
+-*/
+- 
+-#define TO       	0x0100	/* Time Out for remote boot */
+-#define SHE      	0x0080  /* SHadow memory Enable */
+-#define BS       	0x0040  /* Bank Select */
+-#define BUF      	0x0020	/* BUFfer size (1->32k, 0->64k) */
+-#define RBE      	0x0010	/* Remote Boot Enable (1->net boot) */
+-#define AAC      	0x0008  /* Address ROM Address Counter (1->enable) */
+-#define _128KB      	0x0008  /* 128kB Network RAM (1->enable) */
+-#define IM       	0x0004	/* Interrupt Mask (1->mask) */
+-#define IEN      	0x0002	/* Interrupt tristate ENable (1->enable) */
+-#define LED      	0x0001	/* LED control */
+-
+-/* 
+-** Control and Status Register 0 (CSR0) bit definitions 
+-*/
+-
+-#define ERR     	0x8000 	/* Error summary */
+-#define BABL    	0x4000 	/* Babble transmitter timeout error  */
+-#define CERR    	0x2000 	/* Collision Error */
+-#define MISS    	0x1000 	/* Missed packet */
+-#define MERR    	0x0800 	/* Memory Error */
+-#define RINT    	0x0400 	/* Receiver Interrupt */
+-#define TINT    	0x0200 	/* Transmit Interrupt */
+-#define IDON    	0x0100 	/* Initialization Done */
+-#define INTR    	0x0080 	/* Interrupt Flag */
+-#define INEA    	0x0040 	/* Interrupt Enable */
+-#define RXON    	0x0020 	/* Receiver on */
+-#define TXON    	0x0010 	/* Transmitter on */
+-#define TDMD    	0x0008 	/* Transmit Demand */
+-#define STOP    	0x0004 	/* Stop */
+-#define STRT    	0x0002 	/* Start */
+-#define INIT    	0x0001 	/* Initialize */
+-#define INTM            0xff00  /* Interrupt Mask */
+-#define INTE            0xfff0  /* Interrupt Enable */
+-
+-/*
+-** CONTROL AND STATUS REGISTER 3 (CSR3)
+-*/
+-
+-#define BSWP    	0x0004	/* Byte SWaP */
+-#define ACON    	0x0002	/* ALE control */
+-#define BCON    	0x0001	/* Byte CONtrol */
+-
+-/*
+-** Initialization Block Mode Register 
+-*/
+-
+-#define PROM       	0x8000 	/* Promiscuous Mode */
+-#define EMBA       	0x0080	/* Enable Modified Back-off Algorithm */
+-#define INTL       	0x0040 	/* Internal Loopback */
+-#define DRTY       	0x0020 	/* Disable Retry */
+-#define COLL       	0x0010 	/* Force Collision */
+-#define DTCR       	0x0008 	/* Disable Transmit CRC */
+-#define LOOP       	0x0004 	/* Loopback */
+-#define DTX        	0x0002 	/* Disable the Transmitter */
+-#define DRX        	0x0001 	/* Disable the Receiver */
+-
+-/*
+-** Receive Message Descriptor 1 (RMD1) bit definitions. 
+-*/
+-
+-#define R_OWN       0x80000000 	/* Owner bit 0 = host, 1 = lance */
+-#define R_ERR     	0x4000 	/* Error Summary */
+-#define R_FRAM    	0x2000 	/* Framing Error */
+-#define R_OFLO    	0x1000 	/* Overflow Error */
+-#define R_CRC     	0x0800 	/* CRC Error */
+-#define R_BUFF    	0x0400 	/* Buffer Error */
+-#define R_STP     	0x0200 	/* Start of Packet */
+-#define R_ENP     	0x0100 	/* End of Packet */
+-
+-/*
+-** Transmit Message Descriptor 1 (TMD1) bit definitions. 
+-*/
+-
+-#define T_OWN       0x80000000 	/* Owner bit 0 = host, 1 = lance */
+-#define T_ERR     	0x4000 	/* Error Summary */
+-#define T_ADD_FCS 	0x2000 	/* More the 1 retry needed to Xmit */
+-#define T_MORE    	0x1000	/* >1 retry to transmit packet */
+-#define T_ONE     	0x0800 	/* 1 try needed to transmit the packet */
+-#define T_DEF     	0x0400 	/* Deferred */
+-#define T_STP       0x02000000 	/* Start of Packet */
+-#define T_ENP       0x01000000	/* End of Packet */
+-#define T_FLAGS     0xff000000  /* TX Flags Field */
+-
+-/*
+-** Transmit Message Descriptor 3 (TMD3) bit definitions.
+-*/
+-
+-#define TMD3_BUFF    0x8000	/* BUFFer error */
+-#define TMD3_UFLO    0x4000	/* UnderFLOw error */
+-#define TMD3_RES     0x2000	/* REServed */
+-#define TMD3_LCOL    0x1000	/* Late COLlision */
+-#define TMD3_LCAR    0x0800	/* Loss of CARrier */
+-#define TMD3_RTRY    0x0400	/* ReTRY error */
+-
+-/*
+-** Ethernet PROM defines
+-*/
+-#define PROBE_LENGTH    32
+-
+-/*
+-** Set the number of Tx and Rx buffers. Ensure that the memory requested
+-** here is <= to the amount of shared memory set up by the board switches.
+-** The number of descriptors MUST BE A POWER OF 2.
+-**
+-** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ)
+-*/
+-#define NUM_RX_DESC     2               /* Number of RX descriptors */
+-#define NUM_TX_DESC     2               /* Number of TX descriptors */
+-#define RX_BUFF_SZ	1536            /* Buffer size for each Rx buffer */
+-#define TX_BUFF_SZ	1536            /* Buffer size for each Tx buffer */
+-
+-/*
+-** ISA Bus defines
+-*/
+-#define DEPCA_IO_PORTS	{0x300, 0x200, 0}
+-
+-#ifndef	DEPCA_MODEL
+-#define	DEPCA_MODEL	DEPCA
+-#endif
+-
+-static enum {
+-	DEPCA, DE100, DE101, DE200, DE201, DE202, DE210, DE212, DE422, unknown
+-} adapter = DEPCA_MODEL;
+-
+-/*
+-** Name <-> Adapter mapping
+-*/
+-
+-static char *adapter_name[] = {
+-	"DEPCA",
+-	"DE100","DE101",
+-	"DE200","DE201","DE202",
+-	"DE210","DE212",
+-	"DE422",
+-	""
+-};
+-
+-#ifndef	DEPCA_RAM_BASE
+-#define DEPCA_RAM_BASE	0xd0000
+-#endif
+-
+-/*
+-** Memory Alignment. Each descriptor is 4 longwords long. To force a
+-** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
+-** DESC_ALIGN. ALIGN aligns the start address of the private memory area
+-** and hence the RX descriptor ring's first entry. 
+-*/
+-#define ALIGN4      ((u32)4 - 1)       /* 1 longword align */
+-#define ALIGN8      ((u32)8 - 1)       /* 2 longword (quadword) align */
+-#define ALIGN         ALIGN8              /* Keep the LANCE happy... */
+-
+-typedef	long		s32;
+-typedef	unsigned long	u32;
+-typedef	short		s16;
+-typedef	unsigned short	u16;
+-typedef	char		s8;
+-typedef	unsigned char	u8;
+-
+-/*
+-** The DEPCA Rx and Tx ring descriptors. 
+-*/
+-struct depca_rx_desc {
+-    volatile s32 base;
+-    s16 buf_length;		/* This length is negative 2's complement! */
+-    s16 msg_length;		/* This length is "normal". */
+-};
+-
+-struct depca_tx_desc {
+-    volatile s32 base;
+-    s16 length;		        /* This length is negative 2's complement! */
+-    s16 misc;                   /* Errors and TDR info */
+-};
+-
+-#define LA_MASK 0x0000ffff      /* LANCE address mask for mapping network RAM
+-				   to LANCE memory address space */
+-
+-/*
+-** The Lance initialization block, described in databook, in common memory.
+-*/
+-struct depca_init {
+-    u16 mode;	                /* Mode register */
+-    u8  phys_addr[ETH_ALEN];	/* Physical ethernet address */
+-    u8  mcast_table[8];	        /* Multicast Hash Table. */
+-    u32 rx_ring;     	        /* Rx ring base pointer & ring length */
+-    u32 tx_ring;	        /* Tx ring base pointer & ring length */
+-};
+-
+-struct depca_private {
+-	struct depca_rx_desc	*rx_ring;
+-	struct depca_tx_desc	*tx_ring;
+-	struct depca_init	init_block;	/* Shadow init block */
+-	char			*rx_memcpy[NUM_RX_DESC];
+-	char			*tx_memcpy[NUM_TX_DESC];
+-	u32			bus_offset;	/* ISA bus address offset */
+-	u32			sh_mem;		/* address of shared mem */
+-	u32			dma_buffs;	/* Rx & Tx buffer start */
+-	int			rx_cur, tx_cur;	/* Next free ring entry */
+-	int			txRingMask, rxRingMask;
+-	s32			rx_rlen, tx_rlen;
+-	/* log2([rt]xRingMask+1) for the descriptors */
+-};
+-
+-static Address		mem_start = DEPCA_RAM_BASE;
+-static Address		mem_len, offset;
+-static unsigned short	ioaddr = 0;
+-static struct depca_private	lp;
+-
+-/*
+-** Miscellaneous defines...
+-*/
+-#define STOP_DEPCA \
+-    outw(CSR0, DEPCA_ADDR);\
+-    outw(STOP, DEPCA_DATA)
+-
+-/* Initialize the lance Rx and Tx descriptor rings. */
+-static void depca_init_ring(struct nic *nic)
+-{
+-	int	i;
+-	u32	p;
+-
+-	lp.rx_cur = lp.tx_cur = 0;
+-	/* Initialize the base addresses and length of each buffer in the ring */
+-	for (i = 0; i <= lp.rxRingMask; i++) {
+-		writel((p = lp.dma_buffs + i * RX_BUFF_SZ) | R_OWN, &lp.rx_ring[i].base);
+-		writew(-RX_BUFF_SZ, &lp.rx_ring[i].buf_length);
+-		lp.rx_memcpy[i] = (char *) (p + lp.bus_offset);
+-	}
+-	for (i = 0; i <= lp.txRingMask; i++) {
+-		writel((p = lp.dma_buffs + (i + lp.txRingMask + 1) * TX_BUFF_SZ) & 0x00ffffff, &lp.tx_ring[i].base);
+-		lp.tx_memcpy[i] = (char *) (p + lp.bus_offset);
+-	}
+-
+-	/* Set up the initialization block */
+-	lp.init_block.rx_ring = ((u32) ((u32) lp.rx_ring) & LA_MASK) | lp.rx_rlen;
+-	lp.init_block.tx_ring = ((u32) ((u32) lp.tx_ring) & LA_MASK) | lp.tx_rlen;
+-	for (i = 0; i < ETH_ALEN; i++)
+-		lp.init_block.phys_addr[i] = nic->node_addr[i];
+-	lp.init_block.mode = 0x0000;	/* Enable the Tx and Rx */
+-	memset(lp.init_block.mcast_table, 0, sizeof(lp.init_block.mcast_table));
+-}
+-
+-static void LoadCSRs(void)
+-{
+-	outw(CSR1, DEPCA_ADDR);	/* initialisation block address LSW */
+-	outw((u16) (lp.sh_mem & LA_MASK), DEPCA_DATA);
+-	outw(CSR2, DEPCA_ADDR);	/* initialisation block address MSW */
+-	outw((u16) ((lp.sh_mem & LA_MASK) >> 16), DEPCA_DATA);
+-	outw(CSR3, DEPCA_ADDR);	/* ALE control */
+-	outw(ACON, DEPCA_DATA);
+-	outw(CSR0, DEPCA_ADDR);	/* Point back to CSR0 */
+-}
+-
+-static int InitRestartDepca(void)
+-{
+-	int		i;
+-
+-	/* Copy the shadow init_block to shared memory */
+-	memcpy_toio((char *)lp.sh_mem, &lp.init_block, sizeof(struct depca_init));
+-	outw(CSR0, DEPCA_ADDR);		/* point back to CSR0 */
+-	outw(INIT, DEPCA_DATA);		/* initialise DEPCA */
+-
+-	for (i = 0; i < 100 && !(inw(DEPCA_DATA) & IDON); i++)
+-		;
+-	if (i < 100) {
+-		/* clear IDON by writing a 1, and start LANCE */
+-		outw(IDON | STRT, DEPCA_DATA);
+-	} else {
+-		printf("DEPCA not initialised\n");
+-		return (1);
+-	}
+-	return (0);
+-}
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void depca_reset(struct nic *nic)
+-{
+-	s16	nicsr;
+-	int	i, j;
+-
+-	STOP_DEPCA;
+-	nicsr = inb(DEPCA_NICSR);
+-	nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM);
+-	outb(nicsr, DEPCA_NICSR);
+-	if (inw(DEPCA_DATA) != STOP)
+-	{
+-		printf("depca: Cannot stop NIC\n");
+-		return;
+-	}
+-
+-	/* Initialisation block */
+-	lp.sh_mem = mem_start;
+-	mem_start += sizeof(struct depca_init);
+-	/* Tx & Rx descriptors (aligned to a quadword boundary) */
+-	mem_start = (mem_start + ALIGN) & ~ALIGN;
+-	lp.rx_ring = (struct depca_rx_desc *) mem_start;
+-	mem_start += (sizeof(struct depca_rx_desc) * NUM_RX_DESC);
+-	lp.tx_ring = (struct depca_tx_desc *) mem_start;
+-	mem_start += (sizeof(struct depca_tx_desc) * NUM_TX_DESC);
+-
+-	lp.bus_offset = mem_start & 0x00ff0000;
+-	/* LANCE re-mapped start address */
+-	lp.dma_buffs = mem_start & LA_MASK;
+-
+-	/* Finish initialising the ring information. */
+-	lp.rxRingMask = NUM_RX_DESC - 1;
+-	lp.txRingMask = NUM_TX_DESC - 1;
+-
+-	/* Calculate Tx/Rx RLEN size for the descriptors. */
+-	for (i = 0, j = lp.rxRingMask; j > 0; i++) {
+-		j >>= 1;
+-	}
+-	lp.rx_rlen = (s32) (i << 29);
+-	for (i = 0, j = lp.txRingMask; j > 0; i++) {
+-		j >>= 1;
+-	}
+-	lp.tx_rlen = (s32) (i << 29);
+-
+-	/* Load the initialisation block */
+-	depca_init_ring(nic);
+-	LoadCSRs();
+-	InitRestartDepca();
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int depca_poll(struct nic *nic)
+-{
+-	int		entry;
+-	u32		status;
+-
+-	entry = lp.rx_cur;
+-	if ((status = readl(&lp.rx_ring[entry].base) & R_OWN))
+-		return (0);
+-	memcpy(nic->packet, lp.rx_memcpy[entry], nic->packetlen = lp.rx_ring[entry].msg_length);
+-	lp.rx_ring[entry].base |= R_OWN;
+-	lp.rx_cur = (++lp.rx_cur) & lp.rxRingMask;
+-	return (1);
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void depca_transmit(
+-	struct nic *nic,
+-	const char *d,			/* Destination */
+-	unsigned int t,			/* Type */
+-	unsigned int s,			/* size */
+-	const char *p)			/* Packet */
+-{
+-	int		entry, len;
+-	char		*mem;
+-
+-	/* send the packet to destination */
+-	/*
+-	** Caution: the right order is important here... dont
+-	** setup the ownership rights until all the other
+-	** information is in place
+-	*/
+-	mem = lp.tx_memcpy[entry = lp.tx_cur];
+-	memcpy_toio(mem, d, ETH_ALEN);
+-	memcpy_toio(mem + ETH_ALEN, nic->node_addr, ETH_ALEN);
+-	mem[ETH_ALEN * 2] = t >> 8;
+-	mem[ETH_ALEN * 2 + 1] = t;
+-	memcpy_toio(mem + ETH_HLEN, p, s);
+-	s += ETH_HLEN;
+-	len = (s < ETH_ZLEN ? ETH_ZLEN : s);
+-	/* clean out flags */
+-	writel(readl(&lp.tx_ring[entry].base) & ~T_FLAGS, &lp.tx_ring[entry].base);
+-	/* clears other error flags */
+-	writew(0x0000, &lp.tx_ring[entry].misc);
+-	/* packet length in buffer */
+-	writew(-len, &lp.tx_ring[entry].length);
+-	/* start and end of packet, ownership */
+-	writel(readl(&lp.tx_ring[entry].base) | (T_STP|T_ENP|T_OWN), &lp.tx_ring[entry].base);
+-	/* update current pointers */
+-	lp.tx_cur = (++lp.tx_cur) & lp.txRingMask;
+-}
+-
+-/**************************************************************************
+-DISABLE - Turn off ethernet interface
+-***************************************************************************/
+-static void depca_disable(struct nic *nic)
+-{
+-	STOP_DEPCA;
+-}
+-
+-/*
+-** Look for a special sequence in the Ethernet station address PROM that
+-** is common across all DEPCA products. Note that the original DEPCA needs
+-** its ROM address counter to be initialized and enabled. Only enable
+-** if the first address octet is a 0x08 - this minimises the chances of
+-** messing around with some other hardware, but it assumes that this DEPCA
+-** card initialized itself correctly.
+-**
+-** Search the Ethernet address ROM for the signature. Since the ROM address
+-** counter can start at an arbitrary point, the search must include the entire
+-** probe sequence length plus the (length_of_the_signature - 1).
+-** Stop the search IMMEDIATELY after the signature is found so that the
+-** PROM address counter is correctly positioned at the start of the
+-** ethernet address for later read out.
+-*/
+-static int depca_probe1(struct nic *nic)
+-{
+-	u8	data, nicsr;
+-	/* This is only correct for little endian machines, but then
+-	   Etherboot doesn't work on anything but a PC */
+-	u8	sig[] = { 0xFF, 0x00, 0x55, 0xAA, 0xFF, 0x00, 0x55, 0xAA };
+-	int	i, j;
+-	long	sum, chksum;
+-
+-	data = inb(DEPCA_PROM);		/* clear counter on DEPCA */
+-	data = inb(DEPCA_PROM);		/* read data */
+-	if (data == 0x8) {
+-		nicsr = inb(DEPCA_NICSR);
+-		nicsr |= AAC;
+-		outb(nicsr, DEPCA_NICSR);
+-	}
+-	for (i = 0, j = 0; j < (int)sizeof(sig) && i < PROBE_LENGTH+((int)sizeof(sig))-1; ++i) {
+-		data = inb(DEPCA_PROM);
+-		if (data == sig[j])		/* track signature */
+-			++j;
+-		else
+-			j = (data == sig[0]) ? 1 : 0;
+-	}
+-	if (j != sizeof(sig))
+-		return (0);
+-	/* put the card in its initial state */
+-	STOP_DEPCA;
+-	nicsr = ((inb(DEPCA_NICSR) & ~SHE & ~RBE & ~IEN) | IM);
+-	outb(nicsr, DEPCA_NICSR);
+-	if (inw(DEPCA_DATA) != STOP)
+-		return (0);
+-	memcpy((char *)mem_start, sig, sizeof(sig));
+-	if (memcmp((char *)mem_start, sig, sizeof(sig)) != 0)
+-		return (0);
+-	for (i = 0, j = 0, sum = 0; j < 3; j++) {
+-		sum <<= 1;
+-		if (sum > 0xFFFF)
+-			sum -= 0xFFFF;
+-		sum += (u8)(nic->node_addr[i++] = inb(DEPCA_PROM));
+-		sum += (u16)((nic->node_addr[i++] = inb(DEPCA_PROM)) << 8);
+-		if (sum > 0xFFFF)
+-			sum -= 0xFFFF;
+-	}
+-	if (sum == 0xFFFF)
+-		sum = 0;
+-	chksum = (u8)inb(DEPCA_PROM);
+-	chksum |= (u16)(inb(DEPCA_PROM) << 8);
+-	mem_len = (adapter == DEPCA) ? (48 << 10) : (64 << 10);
+-	offset = 0;
+-	if (nicsr & BUF) {
+-		offset = 0x8000;
+-		nicsr &= ~BS;
+-		mem_len -= (32 << 10);
+-	}
+-	if (adapter != DEPCA)	/* enable shadow RAM */
+-		outb(nicsr |= SHE, DEPCA_NICSR);
+-	printf("%s base %#hX, memory [%#hX-%#hX], addr %!",
+-		adapter_name[adapter], ioaddr, mem_start, mem_start + mem_len,
+-		nic->node_addr);
+-	if (sum != chksum)
+-		printf(" (bad checksum)");
+-	putchar('\n');
+-	return (1);
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-struct nic *depca_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	static unsigned short	base[] = DEPCA_IO_PORTS;
+-	int			i;
+-
+-	if (probe_addrs == 0 || probe_addrs[0] == 0)
+-		probe_addrs = base;	/* Use defaults */
+-	for (i = 0; (ioaddr = base[i]) != 0; ++i) {
+-		if (depca_probe1(nic))
+-			break;
+-	}
+-	if (ioaddr == 0)
+-		return (0);
+-	depca_reset(nic);
+-	/* point to NIC specific routines */
+-	nic->reset = depca_reset;
+-	nic->poll = depca_poll;
+-	nic->transmit = depca_transmit;
+-	nic->disable = depca_disable;
+-	return (nic);
+-}
+diff -Naur grub-0.97.orig/netboot/dev.h grub-0.97/netboot/dev.h
+--- grub-0.97.orig/netboot/dev.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/dev.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,83 @@
++#ifndef _DEV_H
++#define _DEV_H
++
++#include "isa.h"
++#include "pci.h"
++
++/* Need to check the packing of this struct if Etherboot is ported */
++struct dev_id
++{
++	unsigned short	vendor_id;
++	unsigned short	device_id;
++	unsigned char	bus_type;
++#define	PCI_BUS_TYPE	1
++#define	ISA_BUS_TYPE	2
++};
++
++/* Dont use sizeof, that will include the padding */
++#define	DEV_ID_SIZE	8
++
++
++struct pci_probe_state 
++{
++#ifdef CONFIG_PCI
++	struct pci_device dev;
++	int advance;
++#else
++	int dummy;
++#endif
++};
++struct isa_probe_state
++{
++#ifdef CONFIG_ISA
++	const struct isa_driver *driver;
++	int advance;
++#else
++	int dummy;
++#endif
++};
++
++union probe_state
++{
++	struct pci_probe_state pci;
++	struct isa_probe_state isa;
++};
++
++struct dev
++{
++	void		(*disable)P((struct dev *));
++	struct dev_id	devid;	/* device ID string (sent to DHCP server) */
++	int		index;  /* Index of next device on this controller to probe */
++	int		type;		/* Type of device I am probing for */
++	int		how_probe;	/* First, next or awake */
++	int 		to_probe;	/* Flavor of device I am probing */
++	int		failsafe;	/* Failsafe probe requested */
++	int		type_index;	/* Index of this device (within type) */
++#define	PROBE_NONE 0
++#define PROBE_PCI  1
++#define PROBE_ISA  2
++	union probe_state state;
++};
++
++
++#define NIC_DRIVER    0
++#define DISK_DRIVER   1
++#define FLOPPY_DRIVER 2
++
++#define BRIDGE_DRIVER 1000
++
++#define PROBE_FIRST  (-1)
++#define PROBE_NEXT   0
++#define PROBE_AWAKE  1		/* After calling disable bring up the same device */
++
++/* The probe result codes are selected
++ * to allow them to be fed back into the probe
++ * routine and get a successful probe.
++ */
++#define PROBE_FAILED PROBE_FIRST
++#define PROBE_WORKED  PROBE_NEXT
++
++extern int probe(struct dev *dev);
++extern void disable(struct dev *dev);
++
++#endif /* _DEV_H */
+diff -Naur grub-0.97.orig/netboot/e1000.c grub-0.97/netboot/e1000.c
+--- grub-0.97.orig/netboot/e1000.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/e1000.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,3682 @@
++/**************************************************************************
++Etherboot -  BOOTP/TFTP Bootstrap Program
++Inter Pro 1000 for Etherboot
++Drivers are port from Intel's Linux driver e1000-4.3.15
++
++***************************************************************************/
++/*******************************************************************************
++
++  
++  Copyright(c) 1999 - 2003 Intel Corporation. All rights reserved.
++  
++  This program is free software; you can redistribute it and/or modify it 
++  under the terms of the GNU General Public License as published by the Free 
++  Software Foundation; either version 2 of the License, or (at your option) 
++  any later version.
++  
++  This program is distributed in the hope that it will be useful, but WITHOUT 
++  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
++  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
++  more details.
++  
++  You should have received a copy of the GNU General Public License along with
++  this program; if not, write to the Free Software Foundation, Inc., 59 
++  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++  
++  The full GNU General Public License is included in this distribution in the
++  file called LICENSE.
++  
++  Contact Information:
++  Linux NICS <linux.nics@intel.com>
++  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++
++*******************************************************************************/
++/*
++ *  Copyright (C) Archway Digital Solutions.
++ *
++ *  written by Chrsitopher Li <cli at arcyway dot com> or <chrisl at gnuchina dot org>
++ *  2/9/2002
++ *
++ *  Copyright (C) Linux Networx.
++ *  Massive upgrade to work with the new intel gigabit NICs.
++ *  <ebiederman at lnxi dot com>
++ *
++ *  Support for 82541ei & 82547ei chips from Intel's Linux driver 5.1.13 added by
++ *  Georg Baum <gbaum@users.sf.net>, sponsored by PetaMem GmbH and linkLINE Communications, Inc.
++ *
++ *  01/2004: Updated to Linux driver 5.2.22 by Georg Baum <gbaum@users.sf.net>
++ */
++
++/* to get some global routines like printf */
++#include "etherboot.h"
++/* to get the interface to the body of the program */
++#include "nic.h"
++/* to get the PCI support functions, if this is a PCI NIC */
++#include "pci.h"
++#include "timer.h"
++
++typedef unsigned char *dma_addr_t;
++
++typedef enum {
++	FALSE = 0,
++	TRUE = 1
++} boolean_t;
++
++#define DEBUG 0
++
++
++/* Some pieces of code are disabled with #if 0 ... #endif.
++ * They are not deleted to show where the etherboot driver differs
++ * from the linux driver below the function level.
++ * Some member variables of the hw struct have been eliminated
++ * and the corresponding inplace checks inserted instead.
++ * Pieces such as LED handling that we definitely don't need are deleted.
++ *
++ * The following defines should not be needed normally,
++ * but may be helpful for debugging purposes. */
++
++/* Define this if you want to program the transmission control register
++ * the way the Linux driver does it. */
++#undef LINUX_DRIVER_TCTL
++
++/* Define this to behave more like the Linux driver. */
++#undef LINUX_DRIVER
++
++#include "e1000_hw.h"
++
++/* NIC specific static variables go here */
++static struct e1000_hw hw;
++static char tx_pool[128 + 16];
++static char rx_pool[128 + 16];
++static char packet[2096];
++
++static struct e1000_tx_desc *tx_base;
++static struct e1000_rx_desc *rx_base;
++
++static int tx_tail;
++static int rx_tail, rx_last;
++
++/* Function forward declarations */
++static int e1000_setup_link(struct e1000_hw *hw);
++static int e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
++static int e1000_setup_copper_link(struct e1000_hw *hw);
++static int e1000_phy_setup_autoneg(struct e1000_hw *hw);
++static void e1000_config_collision_dist(struct e1000_hw *hw);
++static int e1000_config_mac_to_phy(struct e1000_hw *hw);
++static int e1000_config_fc_after_link_up(struct e1000_hw *hw);
++static int e1000_check_for_link(struct e1000_hw *hw);
++static int e1000_wait_autoneg(struct e1000_hw *hw);
++static void e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t *speed, uint16_t *duplex);
++static int e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data);
++static int e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data);
++static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data);
++static int e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data);
++static void e1000_phy_hw_reset(struct e1000_hw *hw);
++static int e1000_phy_reset(struct e1000_hw *hw);
++static int e1000_detect_gig_phy(struct e1000_hw *hw);
++
++/* Printing macros... */
++
++#define E1000_ERR(args...) printf("e1000: " args)
++
++#if DEBUG >= 3
++#define E1000_DBG(args...) printf("e1000: " args)
++#else
++#define E1000_DBG(args...)
++#endif
++
++#define MSGOUT(S, A, B)     printk(S "\n", A, B)
++#if DEBUG >= 2
++#define DEBUGFUNC(F)        DEBUGOUT(F "\n");
++#else
++#define DEBUGFUNC(F)
++#endif
++#if DEBUG >= 1
++#define DEBUGOUT(S) printf(S)
++#define DEBUGOUT1(S,A) printf(S,A)
++#define DEBUGOUT2(S,A,B) printf(S,A,B)
++#define DEBUGOUT3(S,A,B,C) printf(S,A,B,C)
++#define DEBUGOUT7(S,A,B,C,D,E,F,G) printf(S,A,B,C,D,E,F,G)
++#else
++#define DEBUGOUT(S)
++#define DEBUGOUT1(S,A)
++#define DEBUGOUT2(S,A,B)
++#define DEBUGOUT3(S,A,B,C)
++#define DEBUGOUT7(S,A,B,C,D,E,F,G)
++#endif
++
++#define E1000_WRITE_REG(a, reg, value) ( \
++    ((a)->mac_type >= e1000_82543) ? \
++        (writel((value), ((a)->hw_addr + E1000_##reg))) : \
++        (writel((value), ((a)->hw_addr + E1000_82542_##reg))))
++
++#define E1000_READ_REG(a, reg) ( \
++    ((a)->mac_type >= e1000_82543) ? \
++        readl((a)->hw_addr + E1000_##reg) : \
++        readl((a)->hw_addr + E1000_82542_##reg))
++
++#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
++    ((a)->mac_type >= e1000_82543) ? \
++        writel((value), ((a)->hw_addr + E1000_##reg + ((offset) << 2))) : \
++        writel((value), ((a)->hw_addr + E1000_82542_##reg + ((offset) << 2))))
++
++#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
++    ((a)->mac_type >= e1000_82543) ? \
++        readl((a)->hw_addr + E1000_##reg + ((offset) << 2)) : \
++        readl((a)->hw_addr + E1000_82542_##reg + ((offset) << 2)))
++
++#define E1000_WRITE_FLUSH(a) {uint32_t x; x = E1000_READ_REG(a, STATUS);}
++
++uint32_t
++e1000_io_read(struct e1000_hw *hw __unused, uint32_t port)
++{
++        return inl(port);
++}
++
++void
++e1000_io_write(struct e1000_hw *hw __unused, uint32_t port, uint32_t value)
++{
++        outl(value, port);
++}
++
++static inline void e1000_pci_set_mwi(struct e1000_hw *hw)
++{
++	pci_write_config_word(hw->pdev, PCI_COMMAND, hw->pci_cmd_word);
++}
++
++static inline void e1000_pci_clear_mwi(struct e1000_hw *hw)
++{
++	pci_write_config_word(hw->pdev, PCI_COMMAND,
++			      hw->pci_cmd_word & ~PCI_COMMAND_INVALIDATE);
++}
++
++/******************************************************************************
++ * Raises the EEPROM's clock input.
++ *
++ * hw - Struct containing variables accessed by shared code
++ * eecd - EECD's current value
++ *****************************************************************************/
++static void
++e1000_raise_ee_clk(struct e1000_hw *hw,
++                   uint32_t *eecd)
++{
++	/* Raise the clock input to the EEPROM (by setting the SK bit), and then
++	 * wait <delay> microseconds.
++	 */
++	*eecd = *eecd | E1000_EECD_SK;
++	E1000_WRITE_REG(hw, EECD, *eecd);
++	E1000_WRITE_FLUSH(hw);
++	udelay(hw->eeprom.delay_usec);
++}
++
++/******************************************************************************
++ * Lowers the EEPROM's clock input.
++ *
++ * hw - Struct containing variables accessed by shared code 
++ * eecd - EECD's current value
++ *****************************************************************************/
++static void
++e1000_lower_ee_clk(struct e1000_hw *hw,
++                   uint32_t *eecd)
++{
++	/* Lower the clock input to the EEPROM (by clearing the SK bit), and then 
++	 * wait 50 microseconds. 
++	 */
++	*eecd = *eecd & ~E1000_EECD_SK;
++	E1000_WRITE_REG(hw, EECD, *eecd);
++	E1000_WRITE_FLUSH(hw);
++	udelay(hw->eeprom.delay_usec);
++}
++
++/******************************************************************************
++ * Shift data bits out to the EEPROM.
++ *
++ * hw - Struct containing variables accessed by shared code
++ * data - data to send to the EEPROM
++ * count - number of bits to shift out
++ *****************************************************************************/
++static void
++e1000_shift_out_ee_bits(struct e1000_hw *hw,
++                        uint16_t data,
++                        uint16_t count)
++{
++	struct e1000_eeprom_info *eeprom = &hw->eeprom;
++	uint32_t eecd;
++	uint32_t mask;
++	
++	/* We need to shift "count" bits out to the EEPROM. So, value in the
++	 * "data" parameter will be shifted out to the EEPROM one bit at a time.
++	 * In order to do this, "data" must be broken down into bits. 
++	 */
++	mask = 0x01 << (count - 1);
++	eecd = E1000_READ_REG(hw, EECD);
++	if (eeprom->type == e1000_eeprom_microwire) {
++		eecd &= ~E1000_EECD_DO;
++	} else if (eeprom->type == e1000_eeprom_spi) {
++		eecd |= E1000_EECD_DO;
++	}
++	do {
++		/* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
++		 * and then raising and then lowering the clock (the SK bit controls
++		 * the clock input to the EEPROM).  A "0" is shifted out to the EEPROM
++		 * by setting "DI" to "0" and then raising and then lowering the clock.
++		 */
++		eecd &= ~E1000_EECD_DI;
++		
++		if(data & mask)
++			eecd |= E1000_EECD_DI;
++		
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		
++		udelay(eeprom->delay_usec);
++		
++		e1000_raise_ee_clk(hw, &eecd);
++		e1000_lower_ee_clk(hw, &eecd);
++		
++		mask = mask >> 1;
++		
++	} while(mask);
++
++	/* We leave the "DI" bit set to "0" when we leave this routine. */
++	eecd &= ~E1000_EECD_DI;
++	E1000_WRITE_REG(hw, EECD, eecd);
++}
++
++/******************************************************************************
++ * Shift data bits in from the EEPROM
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static uint16_t
++e1000_shift_in_ee_bits(struct e1000_hw *hw,
++                       uint16_t count)
++{
++	uint32_t eecd;
++	uint32_t i;
++	uint16_t data;
++	
++	/* In order to read a register from the EEPROM, we need to shift 'count' 
++	 * bits in from the EEPROM. Bits are "shifted in" by raising the clock
++	 * input to the EEPROM (setting the SK bit), and then reading the value of
++	 * the "DO" bit.  During this "shifting in" process the "DI" bit should
++	 * always be clear.
++	 */
++	
++	eecd = E1000_READ_REG(hw, EECD);
++	
++	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
++	data = 0;
++	
++	for(i = 0; i < count; i++) {
++		data = data << 1;
++		e1000_raise_ee_clk(hw, &eecd);
++		
++		eecd = E1000_READ_REG(hw, EECD);
++		
++		eecd &= ~(E1000_EECD_DI);
++		if(eecd & E1000_EECD_DO)
++			data |= 1;
++		
++		e1000_lower_ee_clk(hw, &eecd);
++	}
++	
++	return data;
++}
++
++/******************************************************************************
++ * Prepares EEPROM for access
++ *
++ * hw - Struct containing variables accessed by shared code
++ *
++ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This 
++ * function should be called before issuing a command to the EEPROM.
++ *****************************************************************************/
++static int32_t
++e1000_acquire_eeprom(struct e1000_hw *hw)
++{
++	struct e1000_eeprom_info *eeprom = &hw->eeprom;
++	uint32_t eecd, i=0;
++
++	eecd = E1000_READ_REG(hw, EECD);
++
++	/* Request EEPROM Access */
++	if(hw->mac_type > e1000_82544) {
++		eecd |= E1000_EECD_REQ;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		eecd = E1000_READ_REG(hw, EECD);
++		while((!(eecd & E1000_EECD_GNT)) &&
++		      (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
++			i++;
++			udelay(5);
++			eecd = E1000_READ_REG(hw, EECD);
++		}
++		if(!(eecd & E1000_EECD_GNT)) {
++			eecd &= ~E1000_EECD_REQ;
++			E1000_WRITE_REG(hw, EECD, eecd);
++			DEBUGOUT("Could not acquire EEPROM grant\n");
++			return -E1000_ERR_EEPROM;
++		}
++	}
++
++	/* Setup EEPROM for Read/Write */
++
++	if (eeprom->type == e1000_eeprom_microwire) {
++		/* Clear SK and DI */
++		eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
++		E1000_WRITE_REG(hw, EECD, eecd);
++
++		/* Set CS */
++		eecd |= E1000_EECD_CS;
++		E1000_WRITE_REG(hw, EECD, eecd);
++	} else if (eeprom->type == e1000_eeprom_spi) {
++		/* Clear SK and CS */
++		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
++		E1000_WRITE_REG(hw, EECD, eecd);
++		udelay(1);
++	}
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Returns EEPROM to a "standby" state
++ * 
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static void
++e1000_standby_eeprom(struct e1000_hw *hw)
++{
++	struct e1000_eeprom_info *eeprom = &hw->eeprom;
++	uint32_t eecd;
++	
++	eecd = E1000_READ_REG(hw, EECD);
++
++	if(eeprom->type == e1000_eeprom_microwire) {
++
++		/* Deselect EEPROM */
++		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(eeprom->delay_usec);
++	
++		/* Clock high */
++		eecd |= E1000_EECD_SK;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(eeprom->delay_usec);
++	
++		/* Select EEPROM */
++		eecd |= E1000_EECD_CS;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(eeprom->delay_usec);
++
++		/* Clock low */
++		eecd &= ~E1000_EECD_SK;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(eeprom->delay_usec);
++	} else if(eeprom->type == e1000_eeprom_spi) {
++		/* Toggle CS to flush commands */
++		eecd |= E1000_EECD_CS;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(eeprom->delay_usec);
++		eecd &= ~E1000_EECD_CS;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(eeprom->delay_usec);
++	}
++}
++
++/******************************************************************************
++ * Terminates a command by inverting the EEPROM's chip select pin
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static void
++e1000_release_eeprom(struct e1000_hw *hw)
++{
++	uint32_t eecd;
++
++	eecd = E1000_READ_REG(hw, EECD);
++
++	if (hw->eeprom.type == e1000_eeprom_spi) {
++		eecd |= E1000_EECD_CS;  /* Pull CS high */
++		eecd &= ~E1000_EECD_SK; /* Lower SCK */
++
++		E1000_WRITE_REG(hw, EECD, eecd);
++
++		udelay(hw->eeprom.delay_usec);
++	} else if(hw->eeprom.type == e1000_eeprom_microwire) {
++		/* cleanup eeprom */
++
++		/* CS on Microwire is active-high */
++		eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
++
++		E1000_WRITE_REG(hw, EECD, eecd);
++
++		/* Rising edge of clock */
++		eecd |= E1000_EECD_SK;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(hw->eeprom.delay_usec);
++
++		/* Falling edge of clock */
++		eecd &= ~E1000_EECD_SK;
++		E1000_WRITE_REG(hw, EECD, eecd);
++		E1000_WRITE_FLUSH(hw);
++		udelay(hw->eeprom.delay_usec);
++	}
++
++	/* Stop requesting EEPROM access */
++	if(hw->mac_type > e1000_82544) {
++		eecd &= ~E1000_EECD_REQ;
++		E1000_WRITE_REG(hw, EECD, eecd);
++	}
++}
++
++/******************************************************************************
++ * Reads a 16 bit word from the EEPROM.
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static int32_t
++e1000_spi_eeprom_ready(struct e1000_hw *hw)
++{
++	uint16_t retry_count = 0;
++	uint8_t spi_stat_reg;
++
++	/* Read "Status Register" repeatedly until the LSB is cleared.  The
++	 * EEPROM will signal that the command has been completed by clearing
++	 * bit 0 of the internal status register.  If it's not cleared within
++	 * 5 milliseconds, then error out.
++	 */
++	retry_count = 0;
++	do {
++		e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
++		hw->eeprom.opcode_bits);
++		spi_stat_reg = (uint8_t)e1000_shift_in_ee_bits(hw, 8);
++		if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
++			break;
++
++		udelay(5);
++		retry_count += 5;
++
++	} while(retry_count < EEPROM_MAX_RETRY_SPI);
++
++	/* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
++	 * only 0-5mSec on 5V devices)
++	 */
++	if(retry_count >= EEPROM_MAX_RETRY_SPI) {
++		DEBUGOUT("SPI EEPROM Status error\n");
++		return -E1000_ERR_EEPROM;
++	}
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Reads a 16 bit word from the EEPROM.
++ *
++ * hw - Struct containing variables accessed by shared code
++ * offset - offset of  word in the EEPROM to read
++ * data - word read from the EEPROM
++ * words - number of words to read
++ *****************************************************************************/
++static int
++e1000_read_eeprom(struct e1000_hw *hw,
++                  uint16_t offset,
++		  uint16_t words,
++                  uint16_t *data)
++{
++	struct e1000_eeprom_info *eeprom = &hw->eeprom;
++	uint32_t i = 0;
++	
++	DEBUGFUNC("e1000_read_eeprom");
++
++	/* A check for invalid values:  offset too large, too many words, and not
++	 * enough words.
++	 */
++	if((offset > eeprom->word_size) || (words > eeprom->word_size - offset) ||
++	   (words == 0)) {
++		DEBUGOUT("\"words\" parameter out of bounds\n");
++		return -E1000_ERR_EEPROM;
++	}
++
++	/*  Prepare the EEPROM for reading  */
++	if(e1000_acquire_eeprom(hw) != E1000_SUCCESS)
++		return -E1000_ERR_EEPROM;
++
++	if(eeprom->type == e1000_eeprom_spi) {
++		uint16_t word_in;
++		uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
++
++		if(e1000_spi_eeprom_ready(hw)) {
++			e1000_release_eeprom(hw);
++			return -E1000_ERR_EEPROM;
++		}
++
++		e1000_standby_eeprom(hw);
++
++		/* Some SPI eeproms use the 8th address bit embedded in the opcode */
++		if((eeprom->address_bits == 8) && (offset >= 128))
++			read_opcode |= EEPROM_A8_OPCODE_SPI;
++
++		/* Send the READ command (opcode + addr)  */
++		e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
++		e1000_shift_out_ee_bits(hw, (uint16_t)(offset*2), eeprom->address_bits);
++
++		/* Read the data.  The address of the eeprom internally increments with
++		 * each byte (spi) being read, saving on the overhead of eeprom setup
++		 * and tear-down.  The address counter will roll over if reading beyond
++		 * the size of the eeprom, thus allowing the entire memory to be read
++		 * starting from any offset. */
++		for (i = 0; i < words; i++) {
++			word_in = e1000_shift_in_ee_bits(hw, 16);
++			data[i] = (word_in >> 8) | (word_in << 8);
++		}
++	} else if(eeprom->type == e1000_eeprom_microwire) {
++		for (i = 0; i < words; i++) {
++			/*  Send the READ command (opcode + addr)  */
++			e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
++						eeprom->opcode_bits);
++			e1000_shift_out_ee_bits(hw, (uint16_t)(offset + i),
++			                        eeprom->address_bits);
++
++			/* Read the data.  For microwire, each word requires the overhead
++			 * of eeprom setup and tear-down. */
++			data[i] = e1000_shift_in_ee_bits(hw, 16);
++			e1000_standby_eeprom(hw);
++		}
++	}
++
++	/* End this read operation */
++	e1000_release_eeprom(hw);
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Verifies that the EEPROM has a valid checksum
++ * 
++ * hw - Struct containing variables accessed by shared code
++ *
++ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
++ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
++ * valid.
++ *****************************************************************************/
++static int
++e1000_validate_eeprom_checksum(struct e1000_hw *hw)
++{
++	uint16_t checksum = 0;
++	uint16_t i, eeprom_data;
++
++	DEBUGFUNC("e1000_validate_eeprom_checksum");
++
++	for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
++		if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
++			DEBUGOUT("EEPROM Read Error\n");
++			return -E1000_ERR_EEPROM;
++		}
++		checksum += eeprom_data;
++	}
++	
++	if(checksum == (uint16_t) EEPROM_SUM)
++		return E1000_SUCCESS;
++	else {
++		DEBUGOUT("EEPROM Checksum Invalid\n");    
++		return -E1000_ERR_EEPROM;
++	}
++}
++
++/******************************************************************************
++ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
++ * second function of dual function devices
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static int 
++e1000_read_mac_addr(struct e1000_hw *hw)
++{
++	uint16_t offset;
++	uint16_t eeprom_data;
++	int i;
++
++	DEBUGFUNC("e1000_read_mac_addr");
++
++	for(i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
++		offset = i >> 1;
++		if(e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
++			DEBUGOUT("EEPROM Read Error\n");
++			return -E1000_ERR_EEPROM;
++		}
++		hw->mac_addr[i] = eeprom_data & 0xff;
++		hw->mac_addr[i+1] = (eeprom_data >> 8) & 0xff;
++	}
++	if(((hw->mac_type == e1000_82546) || (hw->mac_type == e1000_82546_rev_3)) &&
++		(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1))
++		/* Invert the last bit if this is the second device */
++		hw->mac_addr[5] ^= 1;
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Initializes receive address filters.
++ *
++ * hw - Struct containing variables accessed by shared code 
++ *
++ * Places the MAC address in receive address register 0 and clears the rest
++ * of the receive addresss registers. Clears the multicast table. Assumes
++ * the receiver is in reset when the routine is called.
++ *****************************************************************************/
++static void
++e1000_init_rx_addrs(struct e1000_hw *hw)
++{
++	uint32_t i;
++	uint32_t addr_low;
++	uint32_t addr_high;
++	
++	DEBUGFUNC("e1000_init_rx_addrs");
++	
++	/* Setup the receive address. */
++	DEBUGOUT("Programming MAC Address into RAR[0]\n");
++	addr_low = (hw->mac_addr[0] |
++		(hw->mac_addr[1] << 8) |
++		(hw->mac_addr[2] << 16) | (hw->mac_addr[3] << 24));
++	
++	addr_high = (hw->mac_addr[4] |
++		(hw->mac_addr[5] << 8) | E1000_RAH_AV);
++	
++	E1000_WRITE_REG_ARRAY(hw, RA, 0, addr_low);
++	E1000_WRITE_REG_ARRAY(hw, RA, 1, addr_high);
++	
++	/* Zero out the other 15 receive addresses. */
++	DEBUGOUT("Clearing RAR[1-15]\n");
++	for(i = 1; i < E1000_RAR_ENTRIES; i++) {
++		E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
++		E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
++	}
++}
++
++/******************************************************************************
++ * Clears the VLAN filer table
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static void
++e1000_clear_vfta(struct e1000_hw *hw)
++{
++	uint32_t offset;
++    
++	for(offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++)
++		E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
++}
++
++/******************************************************************************
++* Writes a value to one of the devices registers using port I/O (as opposed to
++* memory mapped I/O). Only 82544 and newer devices support port I/O. *
++* hw - Struct containing variables accessed by shared code
++* offset - offset to write to * value - value to write
++*****************************************************************************/
++void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value){
++	uint32_t io_addr = hw->io_base;
++	uint32_t io_data = hw->io_base + 4;
++	e1000_io_write(hw, io_addr, offset);
++	e1000_io_write(hw, io_data, value);
++}
++
++/******************************************************************************
++ * Set the phy type member in the hw struct.
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static int32_t
++e1000_set_phy_type(struct e1000_hw *hw)
++{
++	DEBUGFUNC("e1000_set_phy_type");
++
++	switch(hw->phy_id) {
++	case M88E1000_E_PHY_ID:
++	case M88E1000_I_PHY_ID:
++	case M88E1011_I_PHY_ID:
++		hw->phy_type = e1000_phy_m88;
++		break;
++	case IGP01E1000_I_PHY_ID:
++		hw->phy_type = e1000_phy_igp;
++		break;
++	default:
++		/* Should never have loaded on this device */
++		hw->phy_type = e1000_phy_undefined;
++		return -E1000_ERR_PHY_TYPE;
++	}
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * IGP phy init script - initializes the GbE PHY
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static void
++e1000_phy_init_script(struct e1000_hw *hw)
++{
++	DEBUGFUNC("e1000_phy_init_script");
++
++#if 0
++	/* See e1000_sw_init() of the Linux driver */
++	if(hw->phy_init_script) {
++#else
++	if((hw->mac_type == e1000_82541) ||
++	   (hw->mac_type == e1000_82547) ||
++	   (hw->mac_type == e1000_82541_rev_2) ||
++	   (hw->mac_type == e1000_82547_rev_2)) {
++#endif
++		mdelay(20);
++
++		e1000_write_phy_reg(hw,0x0000,0x0140);
++
++		mdelay(5);
++
++		if(hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547) {
++			e1000_write_phy_reg(hw, 0x1F95, 0x0001);
++
++			e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
++
++			e1000_write_phy_reg(hw, 0x1F79, 0x0018);
++
++			e1000_write_phy_reg(hw, 0x1F30, 0x1600);
++
++			e1000_write_phy_reg(hw, 0x1F31, 0x0014);
++
++			e1000_write_phy_reg(hw, 0x1F32, 0x161C);
++
++			e1000_write_phy_reg(hw, 0x1F94, 0x0003);
++
++			e1000_write_phy_reg(hw, 0x1F96, 0x003F);
++
++			e1000_write_phy_reg(hw, 0x2010, 0x0008);
++		} else {
++			e1000_write_phy_reg(hw, 0x1F73, 0x0099);
++		}
++
++		e1000_write_phy_reg(hw, 0x0000, 0x3300);
++
++
++		if(hw->mac_type == e1000_82547) {
++			uint16_t fused, fine, coarse;
++
++			/* Move to analog registers page */
++			e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
++
++			if(!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
++				e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused);
++
++				fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
++				coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
++
++				if(coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
++					coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10;
++					fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
++				} else if(coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
++					fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
++
++				fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
++					(fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
++					(coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK);
++
++				e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused);
++				e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS,
++						IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
++			}
++		}
++	}
++}
++
++/******************************************************************************
++ * Set the mac type member in the hw struct.
++ * 
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static int
++e1000_set_mac_type(struct e1000_hw *hw)
++{
++	DEBUGFUNC("e1000_set_mac_type");
++
++	switch (hw->device_id) {
++	case E1000_DEV_ID_82542:
++		switch (hw->revision_id) {
++		case E1000_82542_2_0_REV_ID:
++			hw->mac_type = e1000_82542_rev2_0;
++			break;
++		case E1000_82542_2_1_REV_ID:
++			hw->mac_type = e1000_82542_rev2_1;
++			break;
++		default:
++			/* Invalid 82542 revision ID */
++			return -E1000_ERR_MAC_TYPE;
++		}
++		break;
++	case E1000_DEV_ID_82543GC_FIBER:
++	case E1000_DEV_ID_82543GC_COPPER:
++		hw->mac_type = e1000_82543;
++		break;
++	case E1000_DEV_ID_82544EI_COPPER:
++	case E1000_DEV_ID_82544EI_FIBER:
++	case E1000_DEV_ID_82544GC_COPPER:
++	case E1000_DEV_ID_82544GC_LOM:
++		hw->mac_type = e1000_82544;
++		break;
++	case E1000_DEV_ID_82540EM:
++	case E1000_DEV_ID_82540EM_LOM:
++	case E1000_DEV_ID_82540EP:
++	case E1000_DEV_ID_82540EP_LOM:
++	case E1000_DEV_ID_82540EP_LP:
++		hw->mac_type = e1000_82540;
++		break;
++	case E1000_DEV_ID_82545EM_COPPER:
++	case E1000_DEV_ID_82545EM_FIBER:
++		hw->mac_type = e1000_82545;
++		break;
++	case E1000_DEV_ID_82545GM_COPPER:
++	case E1000_DEV_ID_82545GM_FIBER:
++	case E1000_DEV_ID_82545GM_SERDES:
++		hw->mac_type = e1000_82545_rev_3;
++		break;
++	case E1000_DEV_ID_82546EB_COPPER:
++	case E1000_DEV_ID_82546EB_FIBER:
++	case E1000_DEV_ID_82546EB_QUAD_COPPER:
++		hw->mac_type = e1000_82546;
++		break;
++	case E1000_DEV_ID_82546GB_COPPER:
++	case E1000_DEV_ID_82546GB_FIBER:
++	case E1000_DEV_ID_82546GB_SERDES:
++		hw->mac_type = e1000_82546_rev_3;
++		break;
++	case E1000_DEV_ID_82541EI:
++	case E1000_DEV_ID_82541EI_MOBILE:
++		hw->mac_type = e1000_82541;
++		break;
++	case E1000_DEV_ID_82541ER:
++	case E1000_DEV_ID_82541GI:
++	case E1000_DEV_ID_82541GI_MOBILE:
++		hw->mac_type = e1000_82541_rev_2;
++		break;
++	case E1000_DEV_ID_82547EI:
++		hw->mac_type = e1000_82547;
++		break;
++	case E1000_DEV_ID_82547GI:
++		hw->mac_type = e1000_82547_rev_2;
++		break;
++	default:
++		/* Should never have loaded on this device */
++		return -E1000_ERR_MAC_TYPE;
++	}
++
++	return E1000_SUCCESS;
++}
++
++/*****************************************************************************
++ * Set media type and TBI compatibility.
++ *
++ * hw - Struct containing variables accessed by shared code
++ * **************************************************************************/
++static void
++e1000_set_media_type(struct e1000_hw *hw)
++{
++	uint32_t status;
++
++	DEBUGFUNC("e1000_set_media_type");
++	
++	if(hw->mac_type != e1000_82543) {
++		/* tbi_compatibility is only valid on 82543 */
++		hw->tbi_compatibility_en = FALSE;
++	}
++
++	switch (hw->device_id) {
++		case E1000_DEV_ID_82545GM_SERDES:
++		case E1000_DEV_ID_82546GB_SERDES:
++			hw->media_type = e1000_media_type_internal_serdes;
++			break;
++		default:
++			if(hw->mac_type >= e1000_82543) {
++				status = E1000_READ_REG(hw, STATUS);
++				if(status & E1000_STATUS_TBIMODE) {
++					hw->media_type = e1000_media_type_fiber;
++					/* tbi_compatibility not valid on fiber */
++					hw->tbi_compatibility_en = FALSE;
++				} else {
++					hw->media_type = e1000_media_type_copper;
++				}
++			} else {
++				/* This is an 82542 (fiber only) */
++				hw->media_type = e1000_media_type_fiber;
++			}
++	}
++}
++
++/******************************************************************************
++ * Reset the transmit and receive units; mask and clear all interrupts.
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static void
++e1000_reset_hw(struct e1000_hw *hw)
++{
++	uint32_t ctrl;
++	uint32_t ctrl_ext;
++	uint32_t icr;
++	uint32_t manc;
++	
++	DEBUGFUNC("e1000_reset_hw");
++	
++	/* For 82542 (rev 2.0), disable MWI before issuing a device reset */
++	if(hw->mac_type == e1000_82542_rev2_0) {
++		DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
++		e1000_pci_clear_mwi(hw);
++	}
++
++	/* Clear interrupt mask to stop board from generating interrupts */
++	DEBUGOUT("Masking off all interrupts\n");
++	E1000_WRITE_REG(hw, IMC, 0xffffffff);
++	
++	/* Disable the Transmit and Receive units.  Then delay to allow
++	 * any pending transactions to complete before we hit the MAC with
++	 * the global reset.
++	 */
++	E1000_WRITE_REG(hw, RCTL, 0);
++	E1000_WRITE_REG(hw, TCTL, E1000_TCTL_PSP);
++	E1000_WRITE_FLUSH(hw);
++
++	/* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
++	hw->tbi_compatibility_on = FALSE;
++
++	/* Delay to allow any outstanding PCI transactions to complete before
++	 * resetting the device
++	 */ 
++	mdelay(10);
++
++	ctrl = E1000_READ_REG(hw, CTRL);
++
++	/* Must reset the PHY before resetting the MAC */
++	if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
++		E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST));
++		mdelay(5);
++	}
++
++	/* Issue a global reset to the MAC.  This will reset the chip's
++	 * transmit, receive, DMA, and link units.  It will not effect
++	 * the current PCI configuration.  The global reset bit is self-
++	 * clearing, and should clear within a microsecond.
++	 */
++	DEBUGOUT("Issuing a global reset to MAC\n");
++
++	switch(hw->mac_type) {
++		case e1000_82544:
++		case e1000_82540:
++		case e1000_82545:
++		case e1000_82546:
++		case e1000_82541:
++		case e1000_82541_rev_2:
++			/* These controllers can't ack the 64-bit write when issuing the
++			 * reset, so use IO-mapping as a workaround to issue the reset */
++			E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
++			break;
++		case e1000_82545_rev_3:
++		case e1000_82546_rev_3:
++			/* Reset is performed on a shadow of the control register */
++			E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST));
++			break;
++		default:
++			E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
++			break;
++	}
++
++	/* After MAC reset, force reload of EEPROM to restore power-on settings to
++	 * device.  Later controllers reload the EEPROM automatically, so just wait
++	 * for reload to complete.
++	 */
++	switch(hw->mac_type) {
++		case e1000_82542_rev2_0:
++		case e1000_82542_rev2_1:
++		case e1000_82543:
++		case e1000_82544:
++			/* Wait for reset to complete */
++			udelay(10);
++			ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
++			ctrl_ext |= E1000_CTRL_EXT_EE_RST;
++			E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
++			E1000_WRITE_FLUSH(hw);
++			/* Wait for EEPROM reload */
++			mdelay(2);
++			break;
++		case e1000_82541:
++		case e1000_82541_rev_2:
++		case e1000_82547:
++		case e1000_82547_rev_2:
++			/* Wait for EEPROM reload */
++			mdelay(20);
++			break;
++		default:
++			/* Wait for EEPROM reload (it happens automatically) */
++			mdelay(5);
++			break;
++	}
++
++	/* Disable HW ARPs on ASF enabled adapters */
++	if(hw->mac_type >= e1000_82540) {
++		manc = E1000_READ_REG(hw, MANC);
++		manc &= ~(E1000_MANC_ARP_EN);
++		E1000_WRITE_REG(hw, MANC, manc);
++	}
++
++	if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
++		e1000_phy_init_script(hw);
++	}
++
++	/* Clear interrupt mask to stop board from generating interrupts */
++	DEBUGOUT("Masking off all interrupts\n");
++	E1000_WRITE_REG(hw, IMC, 0xffffffff);
++	
++	/* Clear any pending interrupt events. */
++	icr = E1000_READ_REG(hw, ICR);
++
++	/* If MWI was previously enabled, reenable it. */
++	if(hw->mac_type == e1000_82542_rev2_0) {
++#ifdef LINUX_DRIVER
++		if(hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
++#endif
++			e1000_pci_set_mwi(hw);
++	}
++}
++
++/******************************************************************************
++ * Performs basic configuration of the adapter.
++ *
++ * hw - Struct containing variables accessed by shared code
++ * 
++ * Assumes that the controller has previously been reset and is in a 
++ * post-reset uninitialized state. Initializes the receive address registers,
++ * multicast table, and VLAN filter table. Calls routines to setup link
++ * configuration and flow control settings. Clears all on-chip counters. Leaves
++ * the transmit and receive units disabled and uninitialized.
++ *****************************************************************************/
++static int
++e1000_init_hw(struct e1000_hw *hw)
++{
++	uint32_t ctrl, status;
++	uint32_t i;
++	int32_t ret_val;
++	uint16_t pcix_cmd_word;
++	uint16_t pcix_stat_hi_word;
++	uint16_t cmd_mmrbc;
++	uint16_t stat_mmrbc;
++	e1000_bus_type bus_type = e1000_bus_type_unknown;
++
++	DEBUGFUNC("e1000_init_hw");
++
++	/* Set the media type and TBI compatibility */
++	e1000_set_media_type(hw);
++
++	/* Disabling VLAN filtering. */
++	DEBUGOUT("Initializing the IEEE VLAN\n");
++	E1000_WRITE_REG(hw, VET, 0);
++	
++	e1000_clear_vfta(hw);
++	
++	/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
++	if(hw->mac_type == e1000_82542_rev2_0) {
++		DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
++		e1000_pci_clear_mwi(hw);
++		E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST);
++		E1000_WRITE_FLUSH(hw);
++		mdelay(5);
++	}
++	
++	/* Setup the receive address. This involves initializing all of the Receive
++	 * Address Registers (RARs 0 - 15).
++	 */
++	e1000_init_rx_addrs(hw);
++	
++	/* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
++	if(hw->mac_type == e1000_82542_rev2_0) {
++		E1000_WRITE_REG(hw, RCTL, 0);
++		E1000_WRITE_FLUSH(hw);
++		mdelay(1);
++#ifdef LINUX_DRIVER
++		if(hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
++#endif
++			e1000_pci_set_mwi(hw);
++	}
++	
++	/* Zero out the Multicast HASH table */
++	DEBUGOUT("Zeroing the MTA\n");
++	for(i = 0; i < E1000_MC_TBL_SIZE; i++)
++		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
++	
++#if 0
++	/* Set the PCI priority bit correctly in the CTRL register.  This
++	 * determines if the adapter gives priority to receives, or if it
++	 * gives equal priority to transmits and receives.
++	 */
++	if(hw->dma_fairness) {
++		ctrl = E1000_READ_REG(hw, CTRL);
++		E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR);
++	}
++#endif
++
++	switch(hw->mac_type) {
++		case e1000_82545_rev_3:
++		case e1000_82546_rev_3:
++			break;
++		default:
++			if (hw->mac_type >= e1000_82543) {
++				/* See e1000_get_bus_info() of the Linux driver */
++				status = E1000_READ_REG(hw, STATUS);
++				bus_type = (status & E1000_STATUS_PCIX_MODE) ?
++					e1000_bus_type_pcix : e1000_bus_type_pci;
++			}
++
++			/* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
++			if(bus_type == e1000_bus_type_pcix) {
++				pci_read_config_word(hw->pdev, PCIX_COMMAND_REGISTER, &pcix_cmd_word);
++				pci_read_config_word(hw->pdev, PCIX_STATUS_REGISTER_HI, &pcix_stat_hi_word);
++				cmd_mmrbc = (pcix_cmd_word & PCIX_COMMAND_MMRBC_MASK) >>
++					PCIX_COMMAND_MMRBC_SHIFT;
++				stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >>
++					PCIX_STATUS_HI_MMRBC_SHIFT;
++				if(stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
++					stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K;
++				if(cmd_mmrbc > stat_mmrbc) {
++					pcix_cmd_word &= ~PCIX_COMMAND_MMRBC_MASK;
++					pcix_cmd_word |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT;
++					pci_write_config_word(hw->pdev, PCIX_COMMAND_REGISTER, pcix_cmd_word);
++				}
++			}
++			break;
++	}
++
++	/* Call a subroutine to configure the link and setup flow control. */
++	ret_val = e1000_setup_link(hw);
++	
++	/* Set the transmit descriptor write-back policy */
++	if(hw->mac_type > e1000_82544) {
++		ctrl = E1000_READ_REG(hw, TXDCTL);
++		ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
++		E1000_WRITE_REG(hw, TXDCTL, ctrl);
++	}
++
++#if 0
++	/* Clear all of the statistics registers (clear on read).  It is
++	 * important that we do this after we have tried to establish link
++	 * because the symbol error count will increment wildly if there
++	 * is no link.
++	 */
++	e1000_clear_hw_cntrs(hw);
++#endif
++
++	return ret_val;
++}
++
++/******************************************************************************
++ * Adjust SERDES output amplitude based on EEPROM setting.
++ *
++ * hw - Struct containing variables accessed by shared code.
++ *****************************************************************************/
++static int32_t
++e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
++{
++	uint16_t eeprom_data;
++	int32_t  ret_val;
++
++	DEBUGFUNC("e1000_adjust_serdes_amplitude");
++
++	if(hw->media_type != e1000_media_type_internal_serdes)
++		return E1000_SUCCESS;
++
++	switch(hw->mac_type) {
++		case e1000_82545_rev_3:
++		case e1000_82546_rev_3:
++			break;
++		default:
++			return E1000_SUCCESS;
++	}
++
++	if ((ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
++					&eeprom_data))) {
++		return ret_val;
++	}
++
++	if(eeprom_data != EEPROM_RESERVED_WORD) {
++		/* Adjust SERDES output amplitude only. */
++		eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
++		if((ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL,
++		                                  eeprom_data)))
++			return ret_val;
++	}
++
++	return E1000_SUCCESS;
++}
++								   
++/******************************************************************************
++ * Configures flow control and link settings.
++ * 
++ * hw - Struct containing variables accessed by shared code
++ * 
++ * Determines which flow control settings to use. Calls the apropriate media-
++ * specific link configuration function. Configures the flow control settings.
++ * Assuming the adapter has a valid link partner, a valid link should be
++ * established. Assumes the hardware has previously been reset and the 
++ * transmitter and receiver are not enabled.
++ *****************************************************************************/
++static int
++e1000_setup_link(struct e1000_hw *hw)
++{
++	uint32_t ctrl_ext;
++	int32_t ret_val;
++	uint16_t eeprom_data;
++
++	DEBUGFUNC("e1000_setup_link");
++	
++	/* Read and store word 0x0F of the EEPROM. This word contains bits
++	 * that determine the hardware's default PAUSE (flow control) mode,
++	 * a bit that determines whether the HW defaults to enabling or
++	 * disabling auto-negotiation, and the direction of the
++	 * SW defined pins. If there is no SW over-ride of the flow
++	 * control setting, then the variable hw->fc will
++	 * be initialized based on a value in the EEPROM.
++	 */
++	if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data) < 0) {
++		DEBUGOUT("EEPROM Read Error\n");
++		return -E1000_ERR_EEPROM;
++	}
++	
++	if(hw->fc == e1000_fc_default) {
++		if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
++			hw->fc = e1000_fc_none;
++		else if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 
++			EEPROM_WORD0F_ASM_DIR)
++			hw->fc = e1000_fc_tx_pause;
++		else
++			hw->fc = e1000_fc_full;
++	}
++	
++	/* We want to save off the original Flow Control configuration just
++	 * in case we get disconnected and then reconnected into a different
++	 * hub or switch with different Flow Control capabilities.
++	 */
++	if(hw->mac_type == e1000_82542_rev2_0)
++		hw->fc &= (~e1000_fc_tx_pause);
++
++#if 0
++	/* See e1000_sw_init() of the Linux driver */
++	if((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
++#else
++	if((hw->mac_type < e1000_82543) && (hw->mac_type >= e1000_82543))
++#endif
++		hw->fc &= (~e1000_fc_rx_pause);
++	
++#if 0
++	hw->original_fc = hw->fc;
++#endif
++
++	DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
++	
++	/* Take the 4 bits from EEPROM word 0x0F that determine the initial
++	 * polarity value for the SW controlled pins, and setup the
++	 * Extended Device Control reg with that info.
++	 * This is needed because one of the SW controlled pins is used for
++	 * signal detection.  So this should be done before e1000_setup_pcs_link()
++	 * or e1000_phy_setup() is called.
++	 */
++	if(hw->mac_type == e1000_82543) {
++		ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << 
++			SWDPIO__EXT_SHIFT);
++		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
++	}
++	
++	/* Call the necessary subroutine to configure the link. */
++	ret_val = (hw->media_type == e1000_media_type_copper) ?
++		e1000_setup_copper_link(hw) :
++		e1000_setup_fiber_serdes_link(hw);
++	if (ret_val < 0) {
++		return ret_val;
++	}
++	
++	/* Initialize the flow control address, type, and PAUSE timer
++	 * registers to their default values.  This is done even if flow
++	 * control is disabled, because it does not hurt anything to
++	 * initialize these registers.
++	 */
++	DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
++	
++	E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
++	E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
++	E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
++#if 0
++	E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
++#else
++	E1000_WRITE_REG(hw, FCTTV, FC_DEFAULT_TX_TIMER);
++#endif
++	
++	/* Set the flow control receive threshold registers.  Normally,
++	 * these registers will be set to a default threshold that may be
++	 * adjusted later by the driver's runtime code.  However, if the
++	 * ability to transmit pause frames in not enabled, then these
++	 * registers will be set to 0. 
++	 */
++	if(!(hw->fc & e1000_fc_tx_pause)) {
++		E1000_WRITE_REG(hw, FCRTL, 0);
++		E1000_WRITE_REG(hw, FCRTH, 0);
++	} else {
++		/* We need to set up the Receive Threshold high and low water marks
++		 * as well as (optionally) enabling the transmission of XON frames.
++		 */
++#if 0
++		if(hw->fc_send_xon) {
++			E1000_WRITE_REG(hw, FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
++			E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
++		} else {
++			E1000_WRITE_REG(hw, FCRTL, hw->fc_low_water);
++			E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
++		}
++#else
++		E1000_WRITE_REG(hw, FCRTL, (FC_DEFAULT_LO_THRESH | E1000_FCRTL_XONE));
++		E1000_WRITE_REG(hw, FCRTH, FC_DEFAULT_HI_THRESH);
++#endif
++	}
++	return ret_val;
++}
++
++/******************************************************************************
++ * Sets up link for a fiber based or serdes based adapter
++ *
++ * hw - Struct containing variables accessed by shared code
++ *
++ * Manipulates Physical Coding Sublayer functions in order to configure
++ * link. Assumes the hardware has been previously reset and the transmitter
++ * and receiver are not enabled.
++ *****************************************************************************/
++static int
++e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
++{
++	uint32_t ctrl;
++	uint32_t status;
++	uint32_t txcw = 0;
++	uint32_t i;
++	uint32_t signal = 0;
++	int32_t ret_val;
++
++	DEBUGFUNC("e1000_setup_fiber_serdes_link");
++
++	/* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be 
++	 * set when the optics detect a signal. On older adapters, it will be 
++	 * cleared when there is a signal.  This applies to fiber media only.
++	 * If we're on serdes media, adjust the output amplitude to value set in
++	 * the EEPROM.
++	 */
++	ctrl = E1000_READ_REG(hw, CTRL);
++	if(hw->media_type == e1000_media_type_fiber)
++		signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
++
++	if((ret_val = e1000_adjust_serdes_amplitude(hw)))
++		return ret_val;
++
++	/* Take the link out of reset */
++	ctrl &= ~(E1000_CTRL_LRST);
++
++#if 0
++	/* Adjust VCO speed to improve BER performance */
++	if((ret_val = e1000_set_vco_speed(hw)))
++		return ret_val;
++#endif
++
++	e1000_config_collision_dist(hw);
++	
++	/* Check for a software override of the flow control settings, and setup
++	 * the device accordingly.  If auto-negotiation is enabled, then software
++	 * will have to set the "PAUSE" bits to the correct value in the Tranmsit
++	 * Config Word Register (TXCW) and re-start auto-negotiation.  However, if
++	 * auto-negotiation is disabled, then software will have to manually 
++	 * configure the two flow control enable bits in the CTRL register.
++	 *
++	 * The possible values of the "fc" parameter are:
++	 *      0:  Flow control is completely disabled
++	 *      1:  Rx flow control is enabled (we can receive pause frames, but 
++	 *          not send pause frames).
++	 *      2:  Tx flow control is enabled (we can send pause frames but we do
++	 *          not support receiving pause frames).
++	 *      3:  Both Rx and TX flow control (symmetric) are enabled.
++	 */
++	switch (hw->fc) {
++	case e1000_fc_none:
++		/* Flow control is completely disabled by a software over-ride. */
++		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
++		break;
++	case e1000_fc_rx_pause:
++		/* RX Flow control is enabled and TX Flow control is disabled by a 
++		 * software over-ride. Since there really isn't a way to advertise 
++		 * that we are capable of RX Pause ONLY, we will advertise that we
++		 * support both symmetric and asymmetric RX PAUSE. Later, we will
++		 *  disable the adapter's ability to send PAUSE frames.
++		 */
++		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
++		break;
++	case e1000_fc_tx_pause:
++		/* TX Flow control is enabled, and RX Flow control is disabled, by a 
++		 * software over-ride.
++		 */
++		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
++		break;
++	case e1000_fc_full:
++		/* Flow control (both RX and TX) is enabled by a software over-ride. */
++		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
++		break;
++	default:
++		DEBUGOUT("Flow control param set incorrectly\n");
++		return -E1000_ERR_CONFIG;
++		break;
++	}
++	
++	/* Since auto-negotiation is enabled, take the link out of reset (the link
++	 * will be in reset, because we previously reset the chip). This will
++	 * restart auto-negotiation.  If auto-neogtiation is successful then the
++	 * link-up status bit will be set and the flow control enable bits (RFCE
++	 * and TFCE) will be set according to their negotiated value.
++	 */
++	DEBUGOUT("Auto-negotiation enabled\n");
++	
++	E1000_WRITE_REG(hw, TXCW, txcw);
++	E1000_WRITE_REG(hw, CTRL, ctrl);
++	E1000_WRITE_FLUSH(hw);
++	
++	hw->txcw = txcw;
++	mdelay(1);
++	
++	/* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
++	 * indication in the Device Status Register.  Time-out if a link isn't 
++	 * seen in 500 milliseconds seconds (Auto-negotiation should complete in 
++	 * less than 500 milliseconds even if the other end is doing it in SW).
++	 * For internal serdes, we just assume a signal is present, then poll.
++	 */
++	if(hw->media_type == e1000_media_type_internal_serdes ||
++	   (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) {
++		DEBUGOUT("Looking for Link\n");
++		for(i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
++			mdelay(10);
++			status = E1000_READ_REG(hw, STATUS);
++			if(status & E1000_STATUS_LU) break;
++		}
++		if(i == (LINK_UP_TIMEOUT / 10)) {
++			DEBUGOUT("Never got a valid link from auto-neg!!!\n");
++			hw->autoneg_failed = 1;
++			/* AutoNeg failed to achieve a link, so we'll call 
++			 * e1000_check_for_link. This routine will force the link up if
++			 * we detect a signal. This will allow us to communicate with
++			 * non-autonegotiating link partners.
++			 */
++			if((ret_val = e1000_check_for_link(hw))) {
++				DEBUGOUT("Error while checking for link\n");
++				return ret_val;
++			}
++			hw->autoneg_failed = 0;
++		} else {
++			hw->autoneg_failed = 0;
++			DEBUGOUT("Valid Link Found\n");
++		}
++	} else {
++		DEBUGOUT("No Signal Detected\n");
++	}
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++* Detects which PHY is present and the speed and duplex
++*
++* hw - Struct containing variables accessed by shared code
++******************************************************************************/
++static int
++e1000_setup_copper_link(struct e1000_hw *hw)
++{
++	uint32_t ctrl;
++	int32_t ret_val;
++	uint16_t i;
++	uint16_t phy_data;
++	
++	DEBUGFUNC("e1000_setup_copper_link");
++	
++	ctrl = E1000_READ_REG(hw, CTRL);
++	/* With 82543, we need to force speed and duplex on the MAC equal to what
++	 * the PHY speed and duplex configuration is. In addition, we need to
++	 * perform a hardware reset on the PHY to take it out of reset.
++	 */
++	if(hw->mac_type > e1000_82543) {
++		ctrl |= E1000_CTRL_SLU;
++		ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
++		E1000_WRITE_REG(hw, CTRL, ctrl);
++	} else {
++		ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
++		E1000_WRITE_REG(hw, CTRL, ctrl);
++		e1000_phy_hw_reset(hw);
++	}
++	
++	/* Make sure we have a valid PHY */
++	if((ret_val = e1000_detect_gig_phy(hw))) {
++		DEBUGOUT("Error, did not detect valid phy.\n");
++		return ret_val;
++	}
++	DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
++
++	if(hw->mac_type <= e1000_82543 ||
++	   hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
++#if 0
++	   hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
++		hw->phy_reset_disable = FALSE;
++
++	if(!hw->phy_reset_disable) {
++#else
++	   hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
++#endif
++	if (hw->phy_type == e1000_phy_igp) {
++
++		if((ret_val = e1000_phy_reset(hw))) {
++			DEBUGOUT("Error Resetting the PHY\n");
++			return ret_val;
++		}
++
++		/* Wait 10ms for MAC to configure PHY from eeprom settings */
++		mdelay(15);
++
++#if 0
++		/* disable lplu d3 during driver init */
++		if((ret_val = e1000_set_d3_lplu_state(hw, FALSE))) {
++			DEBUGOUT("Error Disabling LPLU D3\n");
++			return ret_val;
++		}
++
++		/* Configure mdi-mdix settings */
++		if((ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL,
++		                                 &phy_data)))
++			return ret_val;
++
++		if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
++			hw->dsp_config_state = e1000_dsp_config_disabled;
++			/* Force MDI for IGP B-0 PHY */
++			phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX |
++			              IGP01E1000_PSCR_FORCE_MDI_MDIX);
++			hw->mdix = 1;
++
++		} else {
++			hw->dsp_config_state = e1000_dsp_config_enabled;
++			phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
++
++			switch (hw->mdix) {
++			case 1:
++				phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
++				break;
++			case 2:
++				phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
++				break;
++			case 0:
++			default:
++				phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
++				break;
++			}
++		}
++		if((ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL,
++		                                  phy_data)))
++			return ret_val;
++
++		/* set auto-master slave resolution settings */
++		e1000_ms_type phy_ms_setting = hw->master_slave;
++
++		if(hw->ffe_config_state == e1000_ffe_config_active)
++			hw->ffe_config_state = e1000_ffe_config_enabled;
++
++		if(hw->dsp_config_state == e1000_dsp_config_activated)
++			hw->dsp_config_state = e1000_dsp_config_enabled;
++#endif
++
++		/* when autonegotiation advertisment is only 1000Mbps then we
++		 * should disable SmartSpeed and enable Auto MasterSlave
++		 * resolution as hardware default. */
++		if(hw->autoneg_advertised == ADVERTISE_1000_FULL) {
++			/* Disable SmartSpeed */
++			if((ret_val = e1000_read_phy_reg(hw,
++			                                 IGP01E1000_PHY_PORT_CONFIG,
++			                                 &phy_data)))
++				return ret_val;
++			phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
++			if((ret_val = e1000_write_phy_reg(hw,
++			                                  IGP01E1000_PHY_PORT_CONFIG,
++			                                  phy_data)))
++				return ret_val;
++			/* Set auto Master/Slave resolution process */
++			if((ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL,
++			                                 &phy_data)))
++				return ret_val;
++			phy_data &= ~CR_1000T_MS_ENABLE;
++			if((ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
++			                                  phy_data)))
++				return ret_val;
++		}
++
++		if((ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL,
++		                                 &phy_data)))
++			return ret_val;
++
++#if 0
++		/* load defaults for future use */
++		hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
++		                            ((phy_data & CR_1000T_MS_VALUE) ?
++		                             e1000_ms_force_master :
++		                             e1000_ms_force_slave) :
++		                             e1000_ms_auto;
++
++		switch (phy_ms_setting) {
++		case e1000_ms_force_master:
++			phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
++			break;
++		case e1000_ms_force_slave:
++			phy_data |= CR_1000T_MS_ENABLE;
++			phy_data &= ~(CR_1000T_MS_VALUE);
++			break;
++		case e1000_ms_auto:
++			phy_data &= ~CR_1000T_MS_ENABLE;
++		default:
++			break;
++		}
++#endif
++
++		if((ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
++		                                  phy_data)))
++			return ret_val;
++	} else {
++		/* Enable CRS on TX. This must be set for half-duplex operation. */
++		if((ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
++		                                 &phy_data)))
++			return ret_val;
++
++		phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
++
++		/* Options:
++		 *   MDI/MDI-X = 0 (default)
++		 *   0 - Auto for all speeds
++		 *   1 - MDI mode
++		 *   2 - MDI-X mode
++		 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
++		 */
++#if 0
++		phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
++
++		switch (hw->mdix) {
++		case 1:
++			phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
++			break;
++		case 2:
++			phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
++			break;
++		case 3:
++			phy_data |= M88E1000_PSCR_AUTO_X_1000T;
++			break;
++		case 0:
++		default:
++#endif
++			phy_data |= M88E1000_PSCR_AUTO_X_MODE;
++#if 0
++			break;
++		}
++#endif
++
++		/* Options:
++		 *   disable_polarity_correction = 0 (default)
++		 *       Automatic Correction for Reversed Cable Polarity
++		 *   0 - Disabled
++		 *   1 - Enabled
++		 */
++		phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
++		if((ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
++		                                  phy_data)))
++			return ret_val;
++
++		/* Force TX_CLK in the Extended PHY Specific Control Register
++		 * to 25MHz clock.
++		 */
++		if((ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
++		                                 &phy_data)))
++			return ret_val;
++
++		phy_data |= M88E1000_EPSCR_TX_CLK_25;
++
++#ifdef LINUX_DRIVER
++		if (hw->phy_revision < M88E1011_I_REV_4) {
++#endif
++			/* Configure Master and Slave downshift values */
++			phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
++				M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
++			phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
++				M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
++			if((ret_val = e1000_write_phy_reg(hw,
++			                                  M88E1000_EXT_PHY_SPEC_CTRL,
++			                                  phy_data)))
++				return ret_val;
++		}
++	
++		/* SW Reset the PHY so all changes take effect */
++		if((ret_val = e1000_phy_reset(hw))) {
++			DEBUGOUT("Error Resetting the PHY\n");
++			return ret_val;
++#ifdef LINUX_DRIVER
++		}
++#endif
++	}
++	
++	/* Options:
++	 *   autoneg = 1 (default)
++	 *      PHY will advertise value(s) parsed from
++	 *      autoneg_advertised and fc
++	 *   autoneg = 0
++	 *      PHY will be set to 10H, 10F, 100H, or 100F
++	 *      depending on value parsed from forced_speed_duplex.
++	 */
++	
++	/* Is autoneg enabled?  This is enabled by default or by software
++	 * override.  If so, call e1000_phy_setup_autoneg routine to parse the
++	 * autoneg_advertised and fc options. If autoneg is NOT enabled, then
++	 * the user should have provided a speed/duplex override.  If so, then
++	 * call e1000_phy_force_speed_duplex to parse and set this up.
++	 */
++	/* Perform some bounds checking on the hw->autoneg_advertised
++	 * parameter.  If this variable is zero, then set it to the default.
++	 */
++	hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
++	
++	/* If autoneg_advertised is zero, we assume it was not defaulted
++	 * by the calling code so we set to advertise full capability.
++	 */
++	if(hw->autoneg_advertised == 0)
++		hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
++	
++	DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
++	if((ret_val = e1000_phy_setup_autoneg(hw))) {
++		DEBUGOUT("Error Setting up Auto-Negotiation\n");
++		return ret_val;
++	}
++	DEBUGOUT("Restarting Auto-Neg\n");
++	
++	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
++	 * the Auto Neg Restart bit in the PHY control register.
++	 */
++	if((ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data)))
++		return ret_val;
++
++	phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
++	if((ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data)))
++		return ret_val;
++
++#if 0	
++	/* Does the user want to wait for Auto-Neg to complete here, or
++	 * check at a later time (for example, callback routine).
++	 */
++	if(hw->wait_autoneg_complete) {
++		if((ret_val = e1000_wait_autoneg(hw))) {
++			DEBUGOUT("Error while waiting for autoneg to complete\n");
++			return ret_val;
++		}
++	}
++#else
++	/* If we do not wait for autonegotiation to complete I 
++	 * do not see a valid link status.
++	 */
++	if((ret_val = e1000_wait_autoneg(hw))) {
++		DEBUGOUT("Error while waiting for autoneg to complete\n");
++		return ret_val;
++	}
++#endif
++	} /* !hw->phy_reset_disable */
++	
++	/* Check link status. Wait up to 100 microseconds for link to become
++	 * valid.
++	 */
++	for(i = 0; i < 10; i++) {
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data)))
++			return ret_val;
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data)))
++			return ret_val;
++
++		if(phy_data & MII_SR_LINK_STATUS) {
++			/* We have link, so we need to finish the config process:
++			 *   1) Set up the MAC to the current PHY speed/duplex
++			 *      if we are on 82543.  If we
++			 *      are on newer silicon, we only need to configure
++			 *      collision distance in the Transmit Control Register.
++			 *   2) Set up flow control on the MAC to that established with
++			 *      the link partner.
++			 */
++			if(hw->mac_type >= e1000_82544) {
++				e1000_config_collision_dist(hw);
++			} else {
++				if((ret_val = e1000_config_mac_to_phy(hw))) {
++					DEBUGOUT("Error configuring MAC to PHY settings\n");
++					return ret_val;
++				}
++			}
++			if((ret_val = e1000_config_fc_after_link_up(hw))) {
++				DEBUGOUT("Error Configuring Flow Control\n");
++				return ret_val;
++			}
++#if 0
++			if(hw->phy_type == e1000_phy_igp) {
++				if((ret_val = e1000_config_dsp_after_link_change(hw, TRUE))) {
++					DEBUGOUT("Error Configuring DSP after link up\n");
++					return ret_val;
++				}
++			}
++#endif
++			DEBUGOUT("Valid link established!!!\n");
++			return E1000_SUCCESS;
++		}
++		udelay(10);
++	}
++	
++	DEBUGOUT("Unable to establish link!!!\n");
++	return -E1000_ERR_NOLINK;
++}
++
++/******************************************************************************
++* Configures PHY autoneg and flow control advertisement settings
++*
++* hw - Struct containing variables accessed by shared code
++******************************************************************************/
++static int
++e1000_phy_setup_autoneg(struct e1000_hw *hw)
++{
++	int32_t ret_val;
++	uint16_t mii_autoneg_adv_reg;
++	uint16_t mii_1000t_ctrl_reg;
++
++	DEBUGFUNC("e1000_phy_setup_autoneg");
++	
++	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
++	if((ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
++	                                 &mii_autoneg_adv_reg)))
++		return ret_val;
++
++	/* Read the MII 1000Base-T Control Register (Address 9). */
++	if((ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg)))
++		return ret_val;
++
++	/* Need to parse both autoneg_advertised and fc and set up
++	 * the appropriate PHY registers.  First we will parse for
++	 * autoneg_advertised software override.  Since we can advertise
++	 * a plethora of combinations, we need to check each bit
++	 * individually.
++	 */
++	
++	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
++	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
++	 * the  1000Base-T Control Register (Address 9).
++	 */
++	mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
++	mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
++
++	DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
++
++	/* Do we want to advertise 10 Mb Half Duplex? */
++	if(hw->autoneg_advertised & ADVERTISE_10_HALF) {
++		DEBUGOUT("Advertise 10mb Half duplex\n");
++		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
++	}
++
++	/* Do we want to advertise 10 Mb Full Duplex? */
++	if(hw->autoneg_advertised & ADVERTISE_10_FULL) {
++		DEBUGOUT("Advertise 10mb Full duplex\n");
++		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
++	}
++
++	/* Do we want to advertise 100 Mb Half Duplex? */
++	if(hw->autoneg_advertised & ADVERTISE_100_HALF) {
++		DEBUGOUT("Advertise 100mb Half duplex\n");
++		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
++	}
++
++	/* Do we want to advertise 100 Mb Full Duplex? */
++	if(hw->autoneg_advertised & ADVERTISE_100_FULL) {
++		DEBUGOUT("Advertise 100mb Full duplex\n");
++		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
++	}
++
++	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
++	if(hw->autoneg_advertised & ADVERTISE_1000_HALF) {
++		DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n");
++	}
++
++	/* Do we want to advertise 1000 Mb Full Duplex? */
++	if(hw->autoneg_advertised & ADVERTISE_1000_FULL) {
++		DEBUGOUT("Advertise 1000mb Full duplex\n");
++		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
++	}
++
++	/* Check for a software override of the flow control settings, and
++	 * setup the PHY advertisement registers accordingly.  If
++	 * auto-negotiation is enabled, then software will have to set the
++	 * "PAUSE" bits to the correct value in the Auto-Negotiation
++	 * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
++	 *
++	 * The possible values of the "fc" parameter are:
++	 *      0:  Flow control is completely disabled
++	 *      1:  Rx flow control is enabled (we can receive pause frames
++	 *          but not send pause frames).
++	 *      2:  Tx flow control is enabled (we can send pause frames
++	 *          but we do not support receiving pause frames).
++	 *      3:  Both Rx and TX flow control (symmetric) are enabled.
++	 *  other:  No software override.  The flow control configuration
++	 *          in the EEPROM is used.
++	 */
++	switch (hw->fc) {
++	case e1000_fc_none: /* 0 */
++		/* Flow control (RX & TX) is completely disabled by a
++		 * software over-ride.
++		 */
++		mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
++		break;
++	case e1000_fc_rx_pause: /* 1 */
++		/* RX Flow control is enabled, and TX Flow control is
++		 * disabled, by a software over-ride.
++		 */
++		/* Since there really isn't a way to advertise that we are
++		 * capable of RX Pause ONLY, we will advertise that we
++		 * support both symmetric and asymmetric RX PAUSE.  Later
++		 * (in e1000_config_fc_after_link_up) we will disable the
++		 *hw's ability to send PAUSE frames.
++		 */
++		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
++		break;
++	case e1000_fc_tx_pause: /* 2 */
++		/* TX Flow control is enabled, and RX Flow control is
++		 * disabled, by a software over-ride.
++		 */
++		mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
++		mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
++		break;
++	case e1000_fc_full: /* 3 */
++		/* Flow control (both RX and TX) is enabled by a software
++		 * over-ride.
++		 */
++		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
++		break;
++	default:
++		DEBUGOUT("Flow control param set incorrectly\n");
++		return -E1000_ERR_CONFIG;
++	}
++
++	if((ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV,
++	                       mii_autoneg_adv_reg)))
++		return ret_val;
++
++	DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
++
++	if((ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg)))
++		return ret_val;
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++* Sets the collision distance in the Transmit Control register
++*
++* hw - Struct containing variables accessed by shared code
++*
++* Link should have been established previously. Reads the speed and duplex
++* information from the Device Status register.
++******************************************************************************/
++static void
++e1000_config_collision_dist(struct e1000_hw *hw)
++{
++	uint32_t tctl;
++
++	tctl = E1000_READ_REG(hw, TCTL);
++	
++	tctl &= ~E1000_TCTL_COLD;
++	tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
++	
++	E1000_WRITE_REG(hw, TCTL, tctl);
++	E1000_WRITE_FLUSH(hw);
++}
++
++/******************************************************************************
++* Sets MAC speed and duplex settings to reflect the those in the PHY
++*
++* hw - Struct containing variables accessed by shared code
++* mii_reg - data to write to the MII control register
++*
++* The contents of the PHY register containing the needed information need to
++* be passed in.
++******************************************************************************/
++static int
++e1000_config_mac_to_phy(struct e1000_hw *hw)
++{
++	uint32_t ctrl;
++	int32_t ret_val;
++	uint16_t phy_data;
++
++	DEBUGFUNC("e1000_config_mac_to_phy");
++
++	/* Read the Device Control Register and set the bits to Force Speed
++	 * and Duplex.
++	 */
++	ctrl = E1000_READ_REG(hw, CTRL);
++	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
++	ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
++
++	/* Set up duplex in the Device Control and Transmit Control
++	 * registers depending on negotiated values.
++	 */
++	if (hw->phy_type == e1000_phy_igp) {
++		if((ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
++		                                 &phy_data)))
++			return ret_val;
++
++		if(phy_data & IGP01E1000_PSSR_FULL_DUPLEX) ctrl |= E1000_CTRL_FD;
++		else ctrl &= ~E1000_CTRL_FD;
++
++		e1000_config_collision_dist(hw);
++
++		/* Set up speed in the Device Control register depending on
++		 * negotiated values.
++		 */
++		if((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
++		   IGP01E1000_PSSR_SPEED_1000MBPS)
++			ctrl |= E1000_CTRL_SPD_1000;
++		else if((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
++			IGP01E1000_PSSR_SPEED_100MBPS)
++			ctrl |= E1000_CTRL_SPD_100;
++	} else {
++		if((ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
++		                                 &phy_data)))
++			return ret_val;
++		
++		if(phy_data & M88E1000_PSSR_DPLX) ctrl |= E1000_CTRL_FD;
++		else ctrl &= ~E1000_CTRL_FD;
++
++		e1000_config_collision_dist(hw);
++
++		/* Set up speed in the Device Control register depending on
++		 * negotiated values.
++		 */
++		if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
++			ctrl |= E1000_CTRL_SPD_1000;
++		else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
++			ctrl |= E1000_CTRL_SPD_100;
++	}
++	/* Write the configured values back to the Device Control Reg. */
++	E1000_WRITE_REG(hw, CTRL, ctrl);
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Forces the MAC's flow control settings.
++ * 
++ * hw - Struct containing variables accessed by shared code
++ *
++ * Sets the TFCE and RFCE bits in the device control register to reflect
++ * the adapter settings. TFCE and RFCE need to be explicitly set by
++ * software when a Copper PHY is used because autonegotiation is managed
++ * by the PHY rather than the MAC. Software must also configure these
++ * bits when link is forced on a fiber connection.
++ *****************************************************************************/
++static int
++e1000_force_mac_fc(struct e1000_hw *hw)
++{
++	uint32_t ctrl;
++	
++	DEBUGFUNC("e1000_force_mac_fc");
++	
++	/* Get the current configuration of the Device Control Register */
++	ctrl = E1000_READ_REG(hw, CTRL);
++	
++	/* Because we didn't get link via the internal auto-negotiation
++	 * mechanism (we either forced link or we got link via PHY
++	 * auto-neg), we have to manually enable/disable transmit an
++	 * receive flow control.
++	 *
++	 * The "Case" statement below enables/disable flow control
++	 * according to the "hw->fc" parameter.
++	 *
++	 * The possible values of the "fc" parameter are:
++	 *      0:  Flow control is completely disabled
++	 *      1:  Rx flow control is enabled (we can receive pause
++	 *          frames but not send pause frames).
++	 *      2:  Tx flow control is enabled (we can send pause frames
++	 *          frames but we do not receive pause frames).
++	 *      3:  Both Rx and TX flow control (symmetric) is enabled.
++	 *  other:  No other values should be possible at this point.
++	 */
++	
++	switch (hw->fc) {
++	case e1000_fc_none:
++		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
++		break;
++	case e1000_fc_rx_pause:
++		ctrl &= (~E1000_CTRL_TFCE);
++		ctrl |= E1000_CTRL_RFCE;
++		break;
++	case e1000_fc_tx_pause:
++		ctrl &= (~E1000_CTRL_RFCE);
++		ctrl |= E1000_CTRL_TFCE;
++		break;
++	case e1000_fc_full:
++		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
++		break;
++	default:
++		DEBUGOUT("Flow control param set incorrectly\n");
++		return -E1000_ERR_CONFIG;
++	}
++	
++	/* Disable TX Flow Control for 82542 (rev 2.0) */
++	if(hw->mac_type == e1000_82542_rev2_0)
++		ctrl &= (~E1000_CTRL_TFCE);
++	
++	E1000_WRITE_REG(hw, CTRL, ctrl);
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Configures flow control settings after link is established
++ * 
++ * hw - Struct containing variables accessed by shared code
++ *
++ * Should be called immediately after a valid link has been established.
++ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
++ * and autonegotiation is enabled, the MAC flow control settings will be set
++ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
++ * and RFCE bits will be automaticaly set to the negotiated flow control mode.
++ *****************************************************************************/
++static int
++e1000_config_fc_after_link_up(struct e1000_hw *hw)
++{
++	int32_t ret_val;
++	uint16_t mii_status_reg;
++	uint16_t mii_nway_adv_reg;
++	uint16_t mii_nway_lp_ability_reg;
++	uint16_t speed;
++	uint16_t duplex;
++	
++	DEBUGFUNC("e1000_config_fc_after_link_up");
++	
++	/* Check for the case where we have fiber media and auto-neg failed
++	 * so we had to force link.  In this case, we need to force the
++	 * configuration of the MAC to match the "fc" parameter.
++	 */
++	if(((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
++	   ((hw->media_type == e1000_media_type_internal_serdes) && (hw->autoneg_failed))) { 
++		if((ret_val = e1000_force_mac_fc(hw))) {
++			DEBUGOUT("Error forcing flow control settings\n");
++			return ret_val;
++		}
++	}
++	
++	/* Check for the case where we have copper media and auto-neg is
++	 * enabled.  In this case, we need to check and see if Auto-Neg
++	 * has completed, and if so, how the PHY and link partner has
++	 * flow control configured.
++	 */
++	if(hw->media_type == e1000_media_type_copper) {
++		/* Read the MII Status Register and check to see if AutoNeg
++		 * has completed.  We read this twice because this reg has
++		 * some "sticky" (latched) bits.
++		 */
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg)))
++			return ret_val;
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg)))
++			return ret_val;
++		
++		if(mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
++			/* The AutoNeg process has completed, so we now need to
++			 * read both the Auto Negotiation Advertisement Register
++			 * (Address 4) and the Auto_Negotiation Base Page Ability
++			 * Register (Address 5) to determine how flow control was
++			 * negotiated.
++			 */
++			if((ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
++			                                 &mii_nway_adv_reg)))
++				return ret_val;
++			if((ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
++			                                 &mii_nway_lp_ability_reg)))
++				return ret_val;
++
++			/* Two bits in the Auto Negotiation Advertisement Register
++			 * (Address 4) and two bits in the Auto Negotiation Base
++			 * Page Ability Register (Address 5) determine flow control
++			 * for both the PHY and the link partner.  The following
++			 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
++			 * 1999, describes these PAUSE resolution bits and how flow
++			 * control is determined based upon these settings.
++			 * NOTE:  DC = Don't Care
++			 *
++			 *   LOCAL DEVICE  |   LINK PARTNER
++			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
++			 *-------|---------|-------|---------|--------------------
++			 *   0   |    0    |  DC   |   DC    | e1000_fc_none
++			 *   0   |    1    |   0   |   DC    | e1000_fc_none
++			 *   0   |    1    |   1   |    0    | e1000_fc_none
++			 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
++			 *   1   |    0    |   0   |   DC    | e1000_fc_none
++			 *   1   |   DC    |   1   |   DC    | e1000_fc_full
++			 *   1   |    1    |   0   |    0    | e1000_fc_none
++			 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
++			 *
++			 */
++			/* Are both PAUSE bits set to 1?  If so, this implies
++			 * Symmetric Flow Control is enabled at both ends.  The
++			 * ASM_DIR bits are irrelevant per the spec.
++			 *
++			 * For Symmetric Flow Control:
++			 *
++			 *   LOCAL DEVICE  |   LINK PARTNER
++			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
++			 *-------|---------|-------|---------|--------------------
++			 *   1   |   DC    |   1   |   DC    | e1000_fc_full
++			 *
++			 */
++			if((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
++				(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
++				/* Now we need to check if the user selected RX ONLY
++				 * of pause frames.  In this case, we had to advertise
++				 * FULL flow control because we could not advertise RX
++				 * ONLY. Hence, we must now check to see if we need to
++				 * turn OFF  the TRANSMISSION of PAUSE frames.
++				 */
++#if 0
++				if(hw->original_fc == e1000_fc_full) {
++					hw->fc = e1000_fc_full;
++#else
++				if(hw->fc == e1000_fc_full) {
++#endif
++					DEBUGOUT("Flow Control = FULL.\r\n");
++				} else {
++					hw->fc = e1000_fc_rx_pause;
++					DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
++				}
++			}
++			/* For receiving PAUSE frames ONLY.
++			 *
++			 *   LOCAL DEVICE  |   LINK PARTNER
++			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
++			 *-------|---------|-------|---------|--------------------
++			 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
++			 *
++			 */
++			else if(!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
++				(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
++				(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
++				(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
++				hw->fc = e1000_fc_tx_pause;
++				DEBUGOUT("Flow Control = TX PAUSE frames only.\r\n");
++			}
++			/* For transmitting PAUSE frames ONLY.
++			 *
++			 *   LOCAL DEVICE  |   LINK PARTNER
++			 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
++			 *-------|---------|-------|---------|--------------------
++			 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
++			 *
++			 */
++			else if((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
++				(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
++				!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
++				(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
++				hw->fc = e1000_fc_rx_pause;
++				DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
++			}
++			/* Per the IEEE spec, at this point flow control should be
++			 * disabled.  However, we want to consider that we could
++			 * be connected to a legacy switch that doesn't advertise
++			 * desired flow control, but can be forced on the link
++			 * partner.  So if we advertised no flow control, that is
++			 * what we will resolve to.  If we advertised some kind of
++			 * receive capability (Rx Pause Only or Full Flow Control)
++			 * and the link partner advertised none, we will configure
++			 * ourselves to enable Rx Flow Control only.  We can do
++			 * this safely for two reasons:  If the link partner really
++			 * didn't want flow control enabled, and we enable Rx, no
++			 * harm done since we won't be receiving any PAUSE frames
++			 * anyway.  If the intent on the link partner was to have
++			 * flow control enabled, then by us enabling RX only, we
++			 * can at least receive pause frames and process them.
++			 * This is a good idea because in most cases, since we are
++			 * predominantly a server NIC, more times than not we will
++			 * be asked to delay transmission of packets than asking
++			 * our link partner to pause transmission of frames.
++			 */
++#if 0
++			else if(hw->original_fc == e1000_fc_none ||
++				hw->original_fc == e1000_fc_tx_pause) {
++#else
++			else if(hw->fc == e1000_fc_none)
++				DEBUGOUT("Flow Control = NONE.\r\n");
++			else if(hw->fc == e1000_fc_tx_pause) {
++#endif
++				hw->fc = e1000_fc_none;
++				DEBUGOUT("Flow Control = NONE.\r\n");
++			} else {
++				hw->fc = e1000_fc_rx_pause;
++				DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
++			}
++			
++			/* Now we need to do one last check...  If we auto-
++			 * negotiated to HALF DUPLEX, flow control should not be
++			 * enabled per IEEE 802.3 spec.
++			 */
++			e1000_get_speed_and_duplex(hw, &speed, &duplex);
++			
++			if(duplex == HALF_DUPLEX)
++				hw->fc = e1000_fc_none;
++			
++			/* Now we call a subroutine to actually force the MAC
++			 * controller to use the correct flow control settings.
++			 */
++			if((ret_val = e1000_force_mac_fc(hw))) {
++				DEBUGOUT("Error forcing flow control settings\n");
++				return ret_val;
++			}
++		} else {
++			DEBUGOUT("Copper PHY and Auto Neg has not completed.\r\n");
++		}
++	}
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Checks to see if the link status of the hardware has changed.
++ *
++ * hw - Struct containing variables accessed by shared code
++ *
++ * Called by any function that needs to check the link status of the adapter.
++ *****************************************************************************/
++static int
++e1000_check_for_link(struct e1000_hw *hw)
++{
++	uint32_t rxcw;
++	uint32_t ctrl;
++	uint32_t status;
++	uint32_t rctl;
++	uint32_t signal = 0;
++	int32_t ret_val;
++	uint16_t phy_data;
++	uint16_t lp_capability;
++	
++	DEBUGFUNC("e1000_check_for_link");
++	
++	/* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be 
++	 * set when the optics detect a signal. On older adapters, it will be 
++	 * cleared when there is a signal.  This applies to fiber media only.
++	 */
++	if(hw->media_type == e1000_media_type_fiber)
++		signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
++
++	ctrl = E1000_READ_REG(hw, CTRL);
++	status = E1000_READ_REG(hw, STATUS);
++	rxcw = E1000_READ_REG(hw, RXCW);
++	
++	/* If we have a copper PHY then we only want to go out to the PHY
++	 * registers to see if Auto-Neg has completed and/or if our link
++	 * status has changed.  The get_link_status flag will be set if we
++	 * receive a Link Status Change interrupt or we have Rx Sequence
++	 * Errors.
++	 */
++#if 0
++	if((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
++#else
++	if(hw->media_type == e1000_media_type_copper) {
++#endif
++		/* First we want to see if the MII Status Register reports
++		 * link.  If so, then we want to get the current speed/duplex
++		 * of the PHY.
++		 * Read the register twice since the link bit is sticky.
++		 */
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data)))
++			return ret_val;
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data)))
++			return ret_val;
++		
++		if(phy_data & MII_SR_LINK_STATUS) {
++#if 0
++			hw->get_link_status = FALSE;
++#endif
++		} else {
++			/* No link detected */
++			return -E1000_ERR_NOLINK;
++		}
++
++		/* We have a M88E1000 PHY and Auto-Neg is enabled.  If we
++		 * have Si on board that is 82544 or newer, Auto
++		 * Speed Detection takes care of MAC speed/duplex
++		 * configuration.  So we only need to configure Collision
++		 * Distance in the MAC.  Otherwise, we need to force
++		 * speed/duplex on the MAC to the current PHY speed/duplex
++		 * settings.
++		 */
++		if(hw->mac_type >= e1000_82544)
++			e1000_config_collision_dist(hw);
++		else {
++			if((ret_val = e1000_config_mac_to_phy(hw))) {
++				DEBUGOUT("Error configuring MAC to PHY settings\n");
++				return ret_val;
++			}
++		}
++		
++		/* Configure Flow Control now that Auto-Neg has completed. First, we 
++		 * need to restore the desired flow control settings because we may
++		 * have had to re-autoneg with a different link partner.
++		 */
++		if((ret_val = e1000_config_fc_after_link_up(hw))) {
++			DEBUGOUT("Error configuring flow control\n");
++			return ret_val;
++		}
++		
++		/* At this point we know that we are on copper and we have
++		 * auto-negotiated link.  These are conditions for checking the link
++		 * parter capability register.  We use the link partner capability to
++		 * determine if TBI Compatibility needs to be turned on or off.  If
++		 * the link partner advertises any speed in addition to Gigabit, then
++		 * we assume that they are GMII-based, and TBI compatibility is not
++		 * needed. If no other speeds are advertised, we assume the link
++		 * partner is TBI-based, and we turn on TBI Compatibility.
++		 */
++		if(hw->tbi_compatibility_en) {
++			if((ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
++			                                 &lp_capability)))
++				return ret_val;
++			if(lp_capability & (NWAY_LPAR_10T_HD_CAPS |
++                                NWAY_LPAR_10T_FD_CAPS |
++                                NWAY_LPAR_100TX_HD_CAPS |
++                                NWAY_LPAR_100TX_FD_CAPS |
++                                NWAY_LPAR_100T4_CAPS)) {
++				/* If our link partner advertises anything in addition to 
++				 * gigabit, we do not need to enable TBI compatibility.
++				 */
++				if(hw->tbi_compatibility_on) {
++					/* If we previously were in the mode, turn it off. */
++					rctl = E1000_READ_REG(hw, RCTL);
++					rctl &= ~E1000_RCTL_SBP;
++					E1000_WRITE_REG(hw, RCTL, rctl);
++					hw->tbi_compatibility_on = FALSE;
++				}
++			} else {
++				/* If TBI compatibility is was previously off, turn it on. For
++				 * compatibility with a TBI link partner, we will store bad
++				 * packets. Some frames have an additional byte on the end and
++				 * will look like CRC errors to to the hardware.
++				 */
++				if(!hw->tbi_compatibility_on) {
++					hw->tbi_compatibility_on = TRUE;
++					rctl = E1000_READ_REG(hw, RCTL);
++					rctl |= E1000_RCTL_SBP;
++					E1000_WRITE_REG(hw, RCTL, rctl);
++				}
++			}
++		}
++	}
++	/* If we don't have link (auto-negotiation failed or link partner cannot
++	 * auto-negotiate), the cable is plugged in (we have signal), and our
++	 * link partner is not trying to auto-negotiate with us (we are receiving
++	 * idles or data), we need to force link up. We also need to give
++	 * auto-negotiation time to complete, in case the cable was just plugged
++	 * in. The autoneg_failed flag does this.
++	 */
++	else if((((hw->media_type == e1000_media_type_fiber) &&
++	        ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
++	        (hw->media_type == e1000_media_type_internal_serdes)) &&
++		(!(status & E1000_STATUS_LU)) &&
++		(!(rxcw & E1000_RXCW_C))) {
++		if(hw->autoneg_failed == 0) {
++			hw->autoneg_failed = 1;
++			return 0;
++		}
++		DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
++		
++		/* Disable auto-negotiation in the TXCW register */
++		E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE));
++		
++		/* Force link-up and also force full-duplex. */
++		ctrl = E1000_READ_REG(hw, CTRL);
++		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
++		E1000_WRITE_REG(hw, CTRL, ctrl);
++		
++		/* Configure Flow Control after forcing link up. */
++		if((ret_val = e1000_config_fc_after_link_up(hw))) {
++			DEBUGOUT("Error configuring flow control\n");
++			return ret_val;
++		}
++	}
++	/* If we are forcing link and we are receiving /C/ ordered sets, re-enable
++	 * auto-negotiation in the TXCW register and disable forced link in the
++	 * Device Control register in an attempt to auto-negotiate with our link
++	 * partner.
++	 */
++	else if(((hw->media_type == e1000_media_type_fiber)  ||
++	         (hw->media_type == e1000_media_type_internal_serdes)) &&
++		(ctrl & E1000_CTRL_SLU) &&
++		(rxcw & E1000_RXCW_C)) {
++		DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\r\n");
++		E1000_WRITE_REG(hw, TXCW, hw->txcw);
++		E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
++	}
++#if 0
++	/* If we force link for non-auto-negotiation switch, check link status
++	 * based on MAC synchronization for internal serdes media type.
++	 */
++	else if((hw->media_type == e1000_media_type_internal_serdes) &&
++			!(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
++		/* SYNCH bit and IV bit are sticky. */
++		udelay(10);
++		if(E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) {
++			if(!(rxcw & E1000_RXCW_IV)) {
++				hw->serdes_link_down = FALSE;
++				DEBUGOUT("SERDES: Link is up.\n");
++			}
++		} else {
++			hw->serdes_link_down = TRUE;
++			DEBUGOUT("SERDES: Link is down.\n");
++		}
++	}
++#endif
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++ * Detects the current speed and duplex settings of the hardware.
++ *
++ * hw - Struct containing variables accessed by shared code
++ * speed - Speed of the connection
++ * duplex - Duplex setting of the connection
++ *****************************************************************************/
++static void 
++e1000_get_speed_and_duplex(struct e1000_hw *hw,
++                           uint16_t *speed,
++                           uint16_t *duplex)
++{
++	uint32_t status;
++	
++	DEBUGFUNC("e1000_get_speed_and_duplex");
++	
++	if(hw->mac_type >= e1000_82543) {
++		status = E1000_READ_REG(hw, STATUS);
++		if(status & E1000_STATUS_SPEED_1000) {
++			*speed = SPEED_1000;
++			DEBUGOUT("1000 Mbs, ");
++		} else if(status & E1000_STATUS_SPEED_100) {
++			*speed = SPEED_100;
++			DEBUGOUT("100 Mbs, ");
++		} else {
++			*speed = SPEED_10;
++			DEBUGOUT("10 Mbs, ");
++		}
++		
++		if(status & E1000_STATUS_FD) {
++			*duplex = FULL_DUPLEX;
++			DEBUGOUT("Full Duplex\r\n");
++		} else {
++			*duplex = HALF_DUPLEX;
++			DEBUGOUT(" Half Duplex\r\n");
++		}
++	} else {
++		DEBUGOUT("1000 Mbs, Full Duplex\r\n");
++		*speed = SPEED_1000;
++		*duplex = FULL_DUPLEX;
++	}
++}
++
++/******************************************************************************
++* Blocks until autoneg completes or times out (~4.5 seconds)
++*
++* hw - Struct containing variables accessed by shared code
++******************************************************************************/
++static int
++e1000_wait_autoneg(struct e1000_hw *hw)
++{
++	int32_t ret_val;
++	uint16_t i;
++	uint16_t phy_data;
++	
++	DEBUGFUNC("e1000_wait_autoneg");
++	DEBUGOUT("Waiting for Auto-Neg to complete.\n");
++	
++	/* We will wait for autoneg to complete or 4.5 seconds to expire. */
++	for(i = PHY_AUTO_NEG_TIME; i > 0; i--) {
++		/* Read the MII Status Register and wait for Auto-Neg
++		 * Complete bit to be set.
++		 */
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data)))
++			return ret_val;
++		if((ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data)))
++			return ret_val;
++		if(phy_data & MII_SR_AUTONEG_COMPLETE) {
++			DEBUGOUT("Auto-Neg complete.\n");
++			return E1000_SUCCESS;
++		}
++		mdelay(100);
++	}
++	DEBUGOUT("Auto-Neg timedout.\n");
++	return -E1000_ERR_TIMEOUT;
++}
++
++/******************************************************************************
++* Raises the Management Data Clock
++*
++* hw - Struct containing variables accessed by shared code
++* ctrl - Device control register's current value
++******************************************************************************/
++static void
++e1000_raise_mdi_clk(struct e1000_hw *hw,
++                    uint32_t *ctrl)
++{
++	/* Raise the clock input to the Management Data Clock (by setting the MDC
++	 * bit), and then delay 10 microseconds.
++	 */
++	E1000_WRITE_REG(hw, CTRL, (*ctrl | E1000_CTRL_MDC));
++	E1000_WRITE_FLUSH(hw);
++	udelay(10);
++}
++
++/******************************************************************************
++* Lowers the Management Data Clock
++*
++* hw - Struct containing variables accessed by shared code
++* ctrl - Device control register's current value
++******************************************************************************/
++static void
++e1000_lower_mdi_clk(struct e1000_hw *hw,
++                    uint32_t *ctrl)
++{
++	/* Lower the clock input to the Management Data Clock (by clearing the MDC
++	 * bit), and then delay 10 microseconds.
++	 */
++	E1000_WRITE_REG(hw, CTRL, (*ctrl & ~E1000_CTRL_MDC));
++	E1000_WRITE_FLUSH(hw);
++	udelay(10);
++}
++
++/******************************************************************************
++* Shifts data bits out to the PHY
++*
++* hw - Struct containing variables accessed by shared code
++* data - Data to send out to the PHY
++* count - Number of bits to shift out
++*
++* Bits are shifted out in MSB to LSB order.
++******************************************************************************/
++static void
++e1000_shift_out_mdi_bits(struct e1000_hw *hw,
++                         uint32_t data,
++                         uint16_t count)
++{
++	uint32_t ctrl;
++	uint32_t mask;
++
++	/* We need to shift "count" number of bits out to the PHY. So, the value
++	 * in the "data" parameter will be shifted out to the PHY one bit at a 
++	 * time. In order to do this, "data" must be broken down into bits.
++	 */
++	mask = 0x01;
++	mask <<= (count - 1);
++	
++	ctrl = E1000_READ_REG(hw, CTRL);
++	
++	/* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
++	ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
++	
++	while(mask) {
++		/* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
++		 * then raising and lowering the Management Data Clock. A "0" is
++		 * shifted out to the PHY by setting the MDIO bit to "0" and then
++		 * raising and lowering the clock.
++		 */
++		if(data & mask) ctrl |= E1000_CTRL_MDIO;
++		else ctrl &= ~E1000_CTRL_MDIO;
++		
++		E1000_WRITE_REG(hw, CTRL, ctrl);
++		E1000_WRITE_FLUSH(hw);
++		
++		udelay(10);
++
++		e1000_raise_mdi_clk(hw, &ctrl);
++		e1000_lower_mdi_clk(hw, &ctrl);
++
++		mask = mask >> 1;
++	}
++}
++
++/******************************************************************************
++* Shifts data bits in from the PHY
++*
++* hw - Struct containing variables accessed by shared code
++*
++* Bits are shifted in in MSB to LSB order. 
++******************************************************************************/
++static uint16_t
++e1000_shift_in_mdi_bits(struct e1000_hw *hw)
++{
++	uint32_t ctrl;
++	uint16_t data = 0;
++	uint8_t i;
++
++	/* In order to read a register from the PHY, we need to shift in a total
++	 * of 18 bits from the PHY. The first two bit (turnaround) times are used
++	 * to avoid contention on the MDIO pin when a read operation is performed.
++	 * These two bits are ignored by us and thrown away. Bits are "shifted in"
++	 * by raising the input to the Management Data Clock (setting the MDC bit),
++	 * and then reading the value of the MDIO bit.
++	 */ 
++	ctrl = E1000_READ_REG(hw, CTRL);
++	
++	/* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
++	ctrl &= ~E1000_CTRL_MDIO_DIR;
++	ctrl &= ~E1000_CTRL_MDIO;
++	
++	E1000_WRITE_REG(hw, CTRL, ctrl);
++	E1000_WRITE_FLUSH(hw);
++	
++	/* Raise and Lower the clock before reading in the data. This accounts for
++	 * the turnaround bits. The first clock occurred when we clocked out the
++	 * last bit of the Register Address.
++	 */
++	e1000_raise_mdi_clk(hw, &ctrl);
++	e1000_lower_mdi_clk(hw, &ctrl);
++	
++	for(data = 0, i = 0; i < 16; i++) {
++		data = data << 1;
++		e1000_raise_mdi_clk(hw, &ctrl);
++		ctrl = E1000_READ_REG(hw, CTRL);
++		/* Check to see if we shifted in a "1". */
++		if(ctrl & E1000_CTRL_MDIO) data |= 1;
++		e1000_lower_mdi_clk(hw, &ctrl);
++	}
++	
++	e1000_raise_mdi_clk(hw, &ctrl);
++	e1000_lower_mdi_clk(hw, &ctrl);
++	
++	return data;
++}
++
++/*****************************************************************************
++* Reads the value from a PHY register, if the value is on a specific non zero
++* page, sets the page first.
++*
++* hw - Struct containing variables accessed by shared code
++* reg_addr - address of the PHY register to read
++******************************************************************************/
++static int
++e1000_read_phy_reg(struct e1000_hw *hw,
++                   uint32_t reg_addr,
++                   uint16_t *phy_data)
++{
++	uint32_t ret_val;
++
++	DEBUGFUNC("e1000_read_phy_reg");
++
++	if(hw->phy_type == e1000_phy_igp &&
++	   (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
++		if((ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
++		                                     (uint16_t)reg_addr)))
++			return ret_val;
++	}
++
++	ret_val = e1000_read_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT & reg_addr,
++	                                phy_data);
++
++	return ret_val;
++}
++
++static int
++e1000_read_phy_reg_ex(struct e1000_hw *hw,
++                      uint32_t reg_addr,
++                      uint16_t *phy_data)
++{
++	uint32_t i;
++	uint32_t mdic = 0;
++	const uint32_t phy_addr = 1;
++
++	DEBUGFUNC("e1000_read_phy_reg_ex");
++	
++	if(reg_addr > MAX_PHY_REG_ADDRESS) {
++		DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
++		return -E1000_ERR_PARAM;
++	}
++	
++	if(hw->mac_type > e1000_82543) {
++		/* Set up Op-code, Phy Address, and register address in the MDI
++		 * Control register.  The MAC will take care of interfacing with the
++		 * PHY to retrieve the desired data.
++		 */
++		mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
++			(phy_addr << E1000_MDIC_PHY_SHIFT) | 
++			(E1000_MDIC_OP_READ));
++		
++		E1000_WRITE_REG(hw, MDIC, mdic);
++
++		/* Poll the ready bit to see if the MDI read completed */
++		for(i = 0; i < 64; i++) {
++			udelay(50);
++			mdic = E1000_READ_REG(hw, MDIC);
++			if(mdic & E1000_MDIC_READY) break;
++		}
++		if(!(mdic & E1000_MDIC_READY)) {
++			DEBUGOUT("MDI Read did not complete\n");
++			return -E1000_ERR_PHY;
++		}
++		if(mdic & E1000_MDIC_ERROR) {
++			DEBUGOUT("MDI Error\n");
++			return -E1000_ERR_PHY;
++		}
++		*phy_data = (uint16_t) mdic;
++	} else {
++		/* We must first send a preamble through the MDIO pin to signal the
++		 * beginning of an MII instruction.  This is done by sending 32
++		 * consecutive "1" bits.
++		 */
++		e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
++		
++		/* Now combine the next few fields that are required for a read
++		 * operation.  We use this method instead of calling the
++		 * e1000_shift_out_mdi_bits routine five different times. The format of
++		 * a MII read instruction consists of a shift out of 14 bits and is
++		 * defined as follows:
++		 *    <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
++		 * followed by a shift in of 18 bits.  This first two bits shifted in
++		 * are TurnAround bits used to avoid contention on the MDIO pin when a
++		 * READ operation is performed.  These two bits are thrown away
++		 * followed by a shift in of 16 bits which contains the desired data.
++		 */
++		mdic = ((reg_addr) | (phy_addr << 5) | 
++			(PHY_OP_READ << 10) | (PHY_SOF << 12));
++		
++		e1000_shift_out_mdi_bits(hw, mdic, 14);
++		
++		/* Now that we've shifted out the read command to the MII, we need to
++		 * "shift in" the 16-bit value (18 total bits) of the requested PHY
++		 * register address.
++		 */
++		*phy_data = e1000_shift_in_mdi_bits(hw);
++	}
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++* Writes a value to a PHY register
++*
++* hw - Struct containing variables accessed by shared code
++* reg_addr - address of the PHY register to write
++* data - data to write to the PHY
++******************************************************************************/
++static int 
++e1000_write_phy_reg(struct e1000_hw *hw,
++                    uint32_t reg_addr,
++                    uint16_t phy_data)
++{
++	uint32_t ret_val;
++
++	DEBUGFUNC("e1000_write_phy_reg");
++
++	if(hw->phy_type == e1000_phy_igp &&
++	   (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
++		if((ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
++		                                     (uint16_t)reg_addr)))
++			return ret_val;
++	}
++
++	ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT & reg_addr,
++	                                 phy_data);
++
++	return ret_val;
++}
++
++static int
++e1000_write_phy_reg_ex(struct e1000_hw *hw,
++                       uint32_t reg_addr,
++                       uint16_t phy_data)
++{
++	uint32_t i;
++	uint32_t mdic = 0;
++	const uint32_t phy_addr = 1;
++	
++	DEBUGFUNC("e1000_write_phy_reg_ex");
++	
++	if(reg_addr > MAX_PHY_REG_ADDRESS) {
++		DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
++		return -E1000_ERR_PARAM;
++	}
++	
++	if(hw->mac_type > e1000_82543) {
++		/* Set up Op-code, Phy Address, register address, and data intended
++		 * for the PHY register in the MDI Control register.  The MAC will take
++		 * care of interfacing with the PHY to send the desired data.
++		 */
++		mdic = (((uint32_t) phy_data) |
++			(reg_addr << E1000_MDIC_REG_SHIFT) |
++			(phy_addr << E1000_MDIC_PHY_SHIFT) | 
++			(E1000_MDIC_OP_WRITE));
++		
++		E1000_WRITE_REG(hw, MDIC, mdic);
++		
++		/* Poll the ready bit to see if the MDI read completed */
++		for(i = 0; i < 640; i++) {
++			udelay(5);
++			mdic = E1000_READ_REG(hw, MDIC);
++			if(mdic & E1000_MDIC_READY) break;
++		}
++		if(!(mdic & E1000_MDIC_READY)) {
++			DEBUGOUT("MDI Write did not complete\n");
++			return -E1000_ERR_PHY;
++		}
++	} else {
++		/* We'll need to use the SW defined pins to shift the write command
++		 * out to the PHY. We first send a preamble to the PHY to signal the
++		 * beginning of the MII instruction.  This is done by sending 32 
++		 * consecutive "1" bits.
++		 */
++		e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
++		
++		/* Now combine the remaining required fields that will indicate a 
++		 * write operation. We use this method instead of calling the
++		 * e1000_shift_out_mdi_bits routine for each field in the command. The
++		 * format of a MII write instruction is as follows:
++		 * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
++		 */
++		mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
++			(PHY_OP_WRITE << 12) | (PHY_SOF << 14));
++		mdic <<= 16;
++		mdic |= (uint32_t) phy_data;
++		
++		e1000_shift_out_mdi_bits(hw, mdic, 32);
++	}
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++* Returns the PHY to the power-on reset state
++*
++* hw - Struct containing variables accessed by shared code
++******************************************************************************/
++static void
++e1000_phy_hw_reset(struct e1000_hw *hw)
++{
++	uint32_t ctrl, ctrl_ext;
++
++	DEBUGFUNC("e1000_phy_hw_reset");
++	
++	DEBUGOUT("Resetting Phy...\n");
++	
++	if(hw->mac_type > e1000_82543) {
++		/* Read the device control register and assert the E1000_CTRL_PHY_RST
++		 * bit. Then, take it out of reset.
++		 */
++		ctrl = E1000_READ_REG(hw, CTRL);
++		E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
++		E1000_WRITE_FLUSH(hw);
++		mdelay(10);
++		E1000_WRITE_REG(hw, CTRL, ctrl);
++		E1000_WRITE_FLUSH(hw);
++	} else {
++		/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
++		 * bit to put the PHY into reset. Then, take it out of reset.
++		 */
++		ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
++		ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
++		ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
++		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
++		E1000_WRITE_FLUSH(hw);
++		mdelay(10);
++		ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
++		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
++		E1000_WRITE_FLUSH(hw);
++	}
++	udelay(150);
++}
++
++/******************************************************************************
++* Resets the PHY
++*
++* hw - Struct containing variables accessed by shared code
++*
++* Sets bit 15 of the MII Control regiser
++******************************************************************************/
++static int 
++e1000_phy_reset(struct e1000_hw *hw)
++{
++	int32_t ret_val;
++	uint16_t phy_data;
++
++	DEBUGFUNC("e1000_phy_reset");
++
++	if(hw->mac_type != e1000_82541_rev_2) {
++		if((ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data)))
++			return ret_val;
++		
++		phy_data |= MII_CR_RESET;
++		if((ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data)))
++			return ret_val;
++		
++		udelay(1);
++	} else e1000_phy_hw_reset(hw);
++
++	if(hw->phy_type == e1000_phy_igp)
++		e1000_phy_init_script(hw);
++
++	return E1000_SUCCESS;
++}
++
++/******************************************************************************
++* Probes the expected PHY address for known PHY IDs
++*
++* hw - Struct containing variables accessed by shared code
++******************************************************************************/
++static int
++e1000_detect_gig_phy(struct e1000_hw *hw)
++{
++	int32_t phy_init_status, ret_val;
++	uint16_t phy_id_high, phy_id_low;
++	boolean_t match = FALSE;
++
++	DEBUGFUNC("e1000_detect_gig_phy");
++	
++	/* Read the PHY ID Registers to identify which PHY is onboard. */
++	if((ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high)))
++		return ret_val;
++
++	hw->phy_id = (uint32_t) (phy_id_high << 16);
++	udelay(20);
++	if((ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low)))
++		return ret_val;
++	
++	hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK);
++#ifdef LINUX_DRIVER
++	hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
++#endif
++	
++	switch(hw->mac_type) {
++	case e1000_82543:
++		if(hw->phy_id == M88E1000_E_PHY_ID) match = TRUE;
++		break;
++	case e1000_82544:
++		if(hw->phy_id == M88E1000_I_PHY_ID) match = TRUE;
++		break;
++	case e1000_82540:
++	case e1000_82545:
++	case e1000_82545_rev_3:
++	case e1000_82546:
++	case e1000_82546_rev_3:
++		if(hw->phy_id == M88E1011_I_PHY_ID) match = TRUE;
++		break;
++	case e1000_82541:
++	case e1000_82541_rev_2:
++	case e1000_82547:
++	case e1000_82547_rev_2:
++		if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE;
++		break;
++	default:
++		DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
++		return -E1000_ERR_CONFIG;
++	}
++	phy_init_status = e1000_set_phy_type(hw);
++
++	if ((match) && (phy_init_status == E1000_SUCCESS)) {
++		DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
++		return E1000_SUCCESS;
++	}
++	DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
++	return -E1000_ERR_PHY;
++}
++
++/******************************************************************************
++ * Sets up eeprom variables in the hw struct.  Must be called after mac_type
++ * is configured.
++ *
++ * hw - Struct containing variables accessed by shared code
++ *****************************************************************************/
++static void
++e1000_init_eeprom_params(struct e1000_hw *hw)
++{
++	struct e1000_eeprom_info *eeprom = &hw->eeprom;
++	uint32_t eecd = E1000_READ_REG(hw, EECD);
++	uint16_t eeprom_size;
++
++	DEBUGFUNC("e1000_init_eeprom_params");
++
++	switch (hw->mac_type) {
++	case e1000_82542_rev2_0:
++	case e1000_82542_rev2_1:
++	case e1000_82543:
++	case e1000_82544:
++		eeprom->type = e1000_eeprom_microwire;
++		eeprom->word_size = 64;
++		eeprom->opcode_bits = 3;
++		eeprom->address_bits = 6;
++		eeprom->delay_usec = 50;
++		break;
++	case e1000_82540:
++	case e1000_82545:
++	case e1000_82545_rev_3:
++	case e1000_82546:
++	case e1000_82546_rev_3:
++		eeprom->type = e1000_eeprom_microwire;
++		eeprom->opcode_bits = 3;
++		eeprom->delay_usec = 50;
++		if(eecd & E1000_EECD_SIZE) {
++			eeprom->word_size = 256;
++			eeprom->address_bits = 8;
++		} else {
++			eeprom->word_size = 64;
++			eeprom->address_bits = 6;
++		}
++		break;
++	case e1000_82541:
++	case e1000_82541_rev_2:
++	case e1000_82547:
++	case e1000_82547_rev_2:
++		if (eecd & E1000_EECD_TYPE) {
++			eeprom->type = e1000_eeprom_spi;
++			if (eecd & E1000_EECD_ADDR_BITS) {
++				eeprom->page_size = 32;
++				eeprom->address_bits = 16;
++			} else {
++				eeprom->page_size = 8;
++				eeprom->address_bits = 8;
++			}
++		} else {
++			eeprom->type = e1000_eeprom_microwire;
++			eeprom->opcode_bits = 3;
++			eeprom->delay_usec = 50;
++			if (eecd & E1000_EECD_ADDR_BITS) {
++				eeprom->word_size = 256;
++				eeprom->address_bits = 8;
++			} else {
++				eeprom->word_size = 64;
++				eeprom->address_bits = 6;
++			}
++		}
++		break;
++	default:
++		eeprom->type = e1000_eeprom_spi;
++		if (eecd & E1000_EECD_ADDR_BITS) {
++			eeprom->page_size = 32;
++			eeprom->address_bits = 16;
++		} else {
++			eeprom->page_size = 8;
++			eeprom->address_bits = 8;
++		}
++		break;
++	}
++
++	if (eeprom->type == e1000_eeprom_spi) {
++		eeprom->opcode_bits = 8;
++		eeprom->delay_usec = 1;
++		eeprom->word_size = 64;
++		if (e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size) == 0) {
++			eeprom_size &= EEPROM_SIZE_MASK;
++
++			switch (eeprom_size) {
++			case EEPROM_SIZE_16KB:
++				eeprom->word_size = 8192;
++				break;
++			case EEPROM_SIZE_8KB:
++				eeprom->word_size = 4096;
++				break;
++			case EEPROM_SIZE_4KB:
++				eeprom->word_size = 2048;
++				break;
++			case EEPROM_SIZE_2KB:
++				eeprom->word_size = 1024;
++				break;
++			case EEPROM_SIZE_1KB:
++				eeprom->word_size = 512;
++				break;
++			case EEPROM_SIZE_512B:
++				eeprom->word_size = 256;
++				break;
++			case EEPROM_SIZE_128B:
++			default:
++				break;
++			}
++		}
++	}
++}
++
++/**
++ * e1000_reset - Reset the adapter
++ */
++
++static int
++e1000_reset(struct e1000_hw *hw)
++{
++	uint32_t pba;
++	/* Repartition Pba for greater than 9k mtu
++	 * To take effect CTRL.RST is required.
++	 */
++
++	if(hw->mac_type < e1000_82547) {
++		pba = E1000_PBA_48K;
++	} else {
++		pba = E1000_PBA_30K;
++	}
++	E1000_WRITE_REG(hw, PBA, pba);
++
++	/* flow control settings */
++#if 0
++	hw->fc_high_water = FC_DEFAULT_HI_THRESH;
++	hw->fc_low_water = FC_DEFAULT_LO_THRESH;
++	hw->fc_pause_time = FC_DEFAULT_TX_TIMER;
++	hw->fc_send_xon = 1;
++	hw->fc = hw->original_fc;
++#endif
++	
++	e1000_reset_hw(hw);
++	if(hw->mac_type >= e1000_82544)
++		E1000_WRITE_REG(hw, WUC, 0);
++	return e1000_init_hw(hw);
++}
++
++/**
++ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
++ * @adapter: board private structure to initialize
++ *
++ * e1000_sw_init initializes the Adapter private data structure.
++ * Fields are initialized based on PCI device information and
++ * OS network device settings (MTU size).
++ **/
++
++static int 
++e1000_sw_init(struct pci_device *pdev, struct e1000_hw *hw)
++{
++	int result;
++
++	/* PCI config space info */
++	pci_read_config_word(pdev, PCI_VENDOR_ID, &hw->vendor_id);
++	pci_read_config_word(pdev, PCI_DEVICE_ID, &hw->device_id);
++	pci_read_config_byte(pdev, PCI_REVISION, &hw->revision_id);
++#if 0
++	pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID,
++                             &hw->subsystem_vendor_id);
++	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &hw->subsystem_id);
++#endif
++
++	pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
++
++	/* identify the MAC */
++
++	result = e1000_set_mac_type(hw);
++	if (result) {
++		E1000_ERR("Unknown MAC Type\n");
++		return result;
++	}
++
++	/* initialize eeprom parameters */
++
++	e1000_init_eeprom_params(hw);
++
++#if 0
++	if((hw->mac_type == e1000_82541) ||
++	   (hw->mac_type == e1000_82547) ||
++	   (hw->mac_type == e1000_82541_rev_2) ||
++	   (hw->mac_type == e1000_82547_rev_2))
++		hw->phy_init_script = 1;
++#endif
++
++	e1000_set_media_type(hw);
++
++#if 0
++	if(hw->mac_type < e1000_82543)
++		hw->report_tx_early = 0;
++	else
++		hw->report_tx_early = 1;
++
++	hw->wait_autoneg_complete = FALSE;
++#endif
++	hw->tbi_compatibility_en = TRUE;
++#if 0
++	hw->adaptive_ifs = TRUE;
++
++	/* Copper options */
++
++	if(hw->media_type == e1000_media_type_copper) {
++		hw->mdix = AUTO_ALL_MODES;
++		hw->disable_polarity_correction = FALSE;
++		hw->master_slave = E1000_MASTER_SLAVE;
++	}
++#endif
++	return E1000_SUCCESS;
++}
++
++static void fill_rx (void)
++{
++	struct e1000_rx_desc *rd;
++	rx_last = rx_tail;
++	rd = rx_base + rx_tail;
++	rx_tail = (rx_tail + 1) % 8;
++	memset (rd, 0, 16);
++	rd->buffer_addr = virt_to_bus(&packet);
++	E1000_WRITE_REG (&hw, RDT, rx_tail);
++}
++
++static void init_descriptor (void)
++{
++	unsigned long ptr;
++	unsigned long tctl;
++
++	ptr = virt_to_phys(tx_pool);
++	if (ptr & 0xf)
++		ptr = (ptr + 0x10) & (~0xf);
++
++	tx_base = phys_to_virt(ptr);
++
++	E1000_WRITE_REG (&hw, TDBAL, virt_to_bus(tx_base));
++	E1000_WRITE_REG (&hw, TDBAH, 0);
++	E1000_WRITE_REG (&hw, TDLEN, 128);
++
++	/* Setup the HW Tx Head and Tail descriptor pointers */
++
++	E1000_WRITE_REG (&hw, TDH, 0);
++	E1000_WRITE_REG (&hw, TDT, 0);
++	tx_tail = 0;
++
++	/* Program the Transmit Control Register */
++
++#ifdef LINUX_DRIVER_TCTL
++	tctl = E1000_READ_REG(&hw, TCTL);
++
++	tctl &= ~E1000_TCTL_CT;
++	tctl |= E1000_TCTL_EN | E1000_TCTL_PSP |
++		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
++#else
++	tctl = E1000_TCTL_PSP | E1000_TCTL_EN |
++		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT) | 
++		(E1000_HDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
++#endif
++
++	E1000_WRITE_REG (&hw, TCTL, tctl);
++
++	e1000_config_collision_dist(&hw);
++
++
++	rx_tail = 0;
++	/* disable receive */
++	E1000_WRITE_REG (&hw, RCTL, 0);
++	ptr = virt_to_phys(rx_pool);
++	if (ptr & 0xf)
++		ptr = (ptr + 0x10) & (~0xf);
++	rx_base = phys_to_virt(ptr);
++
++	/* Setup the Base and Length of the Rx Descriptor Ring */
++
++	E1000_WRITE_REG (&hw, RDBAL, virt_to_bus(rx_base));
++	E1000_WRITE_REG (&hw, RDBAH, 0);
++
++	E1000_WRITE_REG (&hw, RDLEN, 128);
++
++	/* Setup the HW Rx Head and Tail Descriptor Pointers */
++	E1000_WRITE_REG (&hw, RDH, 0);
++	E1000_WRITE_REG (&hw, RDT, 0);
++
++	E1000_WRITE_REG (&hw, RCTL, 
++		E1000_RCTL_EN | 
++		E1000_RCTL_BAM | 
++		E1000_RCTL_SZ_2048 | 
++		E1000_RCTL_MPE);
++	fill_rx();
++}
++
++
++
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int
++e1000_poll (struct nic *nic, int retrieve)
++{
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++	struct e1000_rx_desc *rd;
++
++	rd = rx_base + rx_last;
++	if (!rd->status & E1000_RXD_STAT_DD)
++		return 0;
++
++	if ( ! retrieve ) return 1;
++
++	//      printf("recv: packet %! -> %! len=%d \n", packet+6, packet,rd->Length);
++	memcpy (nic->packet, packet, rd->length);
++	nic->packetlen = rd->length;
++	fill_rx ();
++	return 1;
++}
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void
++e1000_transmit (struct nic *nic, const char *d,	/* Destination */
++		    unsigned int type,	/* Type */
++		    unsigned int size,	/* size */
++		    const char *p)	/* Packet */
++{
++	/* send the packet to destination */
++	struct eth_hdr {
++		unsigned char dst_addr[ETH_ALEN];
++		unsigned char src_addr[ETH_ALEN];
++		unsigned short type;
++	} hdr;
++	struct e1000_tx_desc *txhd;	/* header */
++	struct e1000_tx_desc *txp;	/* payload */
++	DEBUGFUNC("send");
++
++	memcpy (&hdr.dst_addr, d, ETH_ALEN);
++	memcpy (&hdr.src_addr, nic->node_addr, ETH_ALEN);
++
++	hdr.type = htons (type);
++	txhd = tx_base + tx_tail;
++	tx_tail = (tx_tail + 1) % 8;
++	txp = tx_base + tx_tail;
++	tx_tail = (tx_tail + 1) % 8;
++
++	txhd->buffer_addr = virt_to_bus (&hdr);
++	txhd->lower.data = sizeof (hdr);
++	txhd->upper.data = 0;
++
++	txp->buffer_addr = virt_to_bus(p);
++	txp->lower.data = E1000_TXD_CMD_RPS | E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS | size;
++	txp->upper.data = 0;
++
++	E1000_WRITE_REG (&hw, TDT, tx_tail);
++	while (!(txp->upper.data & E1000_TXD_STAT_DD)) {
++		udelay(10);	/* give the nic a chance to write to the register */
++		poll_interruptions();
++	}
++	DEBUGFUNC("send end");
++}
++
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void e1000_disable (struct dev *dev __unused)
++{
++	/* Clear the transmit ring */
++	E1000_WRITE_REG (&hw, TDH, 0);
++	E1000_WRITE_REG (&hw, TDT, 0);
++
++	/* Clear the receive ring */
++	E1000_WRITE_REG (&hw, RDH, 0);
++	E1000_WRITE_REG (&hw, RDT, 0);
++
++	/* put the card in its initial state */
++	E1000_WRITE_REG (&hw, CTRL, E1000_CTRL_RST);
++
++	/* Turn off the ethernet interface */
++	E1000_WRITE_REG (&hw, RCTL, 0);
++	E1000_WRITE_REG (&hw, TCTL, 0);
++	mdelay (10);
++
++	/* Unmap my window to the device */
++	iounmap(hw.hw_addr);
++}
++
++/**************************************************************************
++IRQ - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void e1000_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++#define IORESOURCE_IO	0x00000100     /* Resource type */
++#define BAR_0		0
++#define BAR_1		1
++#define BAR_5		5
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++You should omit the last argument struct pci_device * for a non-PCI NIC
++***************************************************************************/
++static int e1000_probe(struct dev *dev, struct pci_device *p)
++{
++	struct nic *nic = (struct nic *)dev;
++	unsigned long mmio_start, mmio_len;
++	int ret_val, i;
++
++	if (p == 0)
++		return 0;
++	/* Initialize hw with default values */
++	memset(&hw, 0, sizeof(hw));
++	hw.pdev = p;
++
++#if 1
++	/* Are these variables needed? */
++	hw.fc                    = e1000_fc_none;
++#if 0
++	hw.original_fc           = e1000_fc_none;
++#endif
++	hw.autoneg_failed        = 0;
++#if 0
++	hw.get_link_status       = TRUE;
++#endif
++#endif
++
++	mmio_start = pci_bar_start(p, PCI_BASE_ADDRESS_0);
++	mmio_len   = pci_bar_size(p,  PCI_BASE_ADDRESS_0);
++	hw.hw_addr = ioremap(mmio_start, mmio_len);
++
++	for(i = BAR_1; i <= BAR_5; i++) {
++		if(pci_bar_size(p, i) == 0)
++			continue;                
++		if(pci_find_capability(p, i) & IORESOURCE_IO) {
++			hw.io_base = pci_bar_start(p, i);
++			break;
++                }        
++	}
++
++	adjust_pci_device(p);
++
++	nic->ioaddr   = p->ioaddr & ~3;
++	nic->irqno    = 0;
++
++	/* From Matt Hortman <mbhortman@acpthinclient.com> */
++	/* MAC and Phy settings */
++
++	/* setup the private structure */
++	if (e1000_sw_init(p, &hw) < 0) {
++		iounmap(hw.hw_addr);
++		return 0;
++	}
++
++	/* make sure the EEPROM is good */
++
++	if (e1000_validate_eeprom_checksum(&hw) < 0) {
++		printf ("The EEPROM Checksum Is Not Valid\n");
++		iounmap(hw.hw_addr);
++		return 0;
++	}
++
++	/* copy the MAC address out of the EEPROM */
++
++	e1000_read_mac_addr(&hw);
++	memcpy (nic->node_addr, hw.mac_addr, ETH_ALEN);
++	
++	printf("Ethernet addr: %!\n", nic->node_addr);
++
++	/* reset the hardware with the new settings */
++
++	ret_val = e1000_reset(&hw);
++	if (ret_val < 0) {
++		if ((ret_val == -E1000_ERR_NOLINK) ||
++			(ret_val == -E1000_ERR_TIMEOUT)) {
++			E1000_ERR("Valid Link not detected\n");
++		} else {
++			E1000_ERR("Hardware Initialization Failed\n");
++		}
++		iounmap(hw.hw_addr);
++		return 0;
++	}
++	init_descriptor();
++
++	/* point to NIC specific routines */
++	dev->disable  = e1000_disable;
++	nic->poll     = e1000_poll;
++	nic->transmit = e1000_transmit;
++	nic->irq      = e1000_irq;
++
++	return 1;
++}
++
++static struct pci_id e1000_nics[] = {
++PCI_ROM(0x8086, 0x1000, "e1000-82542",               "Intel EtherExpressPro1000"),
++PCI_ROM(0x8086, 0x1001, "e1000-82543gc-fiber",       "Intel EtherExpressPro1000 82543GC Fiber"),
++PCI_ROM(0x8086, 0x1004, "e1000-82543gc-copper",	     "Intel EtherExpressPro1000 82543GC Copper"),
++PCI_ROM(0x8086, 0x1008, "e1000-82544ei-copper",      "Intel EtherExpressPro1000 82544EI Copper"),
++PCI_ROM(0x8086, 0x1009, "e1000-82544ei-fiber",       "Intel EtherExpressPro1000 82544EI Fiber"),
++PCI_ROM(0x8086, 0x100C, "e1000-82544gc-copper",      "Intel EtherExpressPro1000 82544GC Copper"),
++PCI_ROM(0x8086, 0x100D, "e1000-82544gc-lom",         "Intel EtherExpressPro1000 82544GC LOM"),
++PCI_ROM(0x8086, 0x100E, "e1000-82540em",     	     "Intel EtherExpressPro1000 82540EM"),
++PCI_ROM(0x8086, 0x100F, "e1000-82545em-copper",      "Intel EtherExpressPro1000 82545EM Copper"),
++PCI_ROM(0x8086, 0x1010, "e1000-82546eb-copper",      "Intel EtherExpressPro1000 82546EB Copper"),
++PCI_ROM(0x8086, 0x1011, "e1000-82545em-fiber",       "Intel EtherExpressPro1000 82545EM Fiber"),
++PCI_ROM(0x8086, 0x1012, "e1000-82546eb-fiber", 	     "Intel EtherExpressPro1000 82546EB Copper"),
++PCI_ROM(0x8086, 0x1013, "e1000-82541ei",	     "Intel EtherExpressPro1000 82541EI"),
++PCI_ROM(0x8086, 0x1015, "e1000-82540em-lom",  	     "Intel EtherExpressPro1000 82540EM LOM"),
++PCI_ROM(0x8086, 0x1016, "e1000-82540ep-lom",	     "Intel EtherExpressPro1000 82540EP LOM"),
++PCI_ROM(0x8086, 0x1017, "e1000-82540ep",	     "Intel EtherExpressPro1000 82540EP"),
++PCI_ROM(0x8086, 0x1018, "e1000-82541ep",	     "Intel EtherExpressPro1000 82541EP"),
++PCI_ROM(0x8086, 0x1019, "e1000-82547ei",	     "Intel EtherExpressPro1000 82547EI"),
++PCI_ROM(0x8086, 0x101d, "e1000-82546eb-quad-copper", "Intel EtherExpressPro1000 82546EB Quad Copper"),
++PCI_ROM(0x8086, 0x101e, "e1000-82540ep-lp",	     "Intel EtherExpressPro1000 82540EP LP"),
++PCI_ROM(0x8086, 0x1026, "e1000-82545gm-copper",	     "Intel EtherExpressPro1000 82545GM Copper"),
++PCI_ROM(0x8086, 0x1027, "e1000-82545gm-fiber",	     "Intel EtherExpressPro1000 82545GM Fiber"),
++PCI_ROM(0x8086, 0x1028, "e1000-82545gm-serdes",	     "Intel EtherExpressPro1000 82545GM SERDES"),
++PCI_ROM(0x8086, 0x1075, "e1000-82547gi",	     "Intel EtherExpressPro1000 82547GI"),
++PCI_ROM(0x8086, 0x1076, "e1000-82541gi",	     "Intel EtherExpressPro1000 82541GI"),
++PCI_ROM(0x8086, 0x1077, "e1000-82541gi-mobile",	     "Intel EtherExpressPro1000 82541GI Mobile"),
++PCI_ROM(0x8086, 0x1078, "e1000-82541er",	     "Intel EtherExpressPro1000 82541ER"),
++PCI_ROM(0x8086, 0x1079, "e1000-82546gb-copper",	     "Intel EtherExpressPro1000 82546GB Copper"),
++PCI_ROM(0x8086, 0x107a, "e1000-82546gb-fiber",	     "Intel EtherExpressPro1000 82546GB Fiber"),
++PCI_ROM(0x8086, 0x107b, "e1000-82546gb-serdes",	     "Intel EtherExpressPro1000 82546GB SERDES"),
++};
++
++struct pci_driver e1000_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "E1000",
++	.probe    = e1000_probe,
++	.ids      = e1000_nics,
++	.id_count = sizeof(e1000_nics)/sizeof(e1000_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/e1000_hw.h grub-0.97/netboot/e1000_hw.h
+--- grub-0.97.orig/netboot/e1000_hw.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/e1000_hw.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,2058 @@
++/*******************************************************************************
++
++  
++  Copyright(c) 1999 - 2003 Intel Corporation. All rights reserved.
++  
++  This program is free software; you can redistribute it and/or modify it 
++  under the terms of the GNU General Public License as published by the Free 
++  Software Foundation; either version 2 of the License, or (at your option) 
++  any later version.
++  
++  This program is distributed in the hope that it will be useful, but WITHOUT 
++  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
++  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
++  more details.
++  
++  You should have received a copy of the GNU General Public License along with
++  this program; if not, write to the Free Software Foundation, Inc., 59 
++  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++  
++  The full GNU General Public License is included in this distribution in the
++  file called LICENSE.
++  
++  Contact Information:
++  Linux NICS <linux.nics@intel.com>
++  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++
++*******************************************************************************/
++
++/* e1000_hw.h
++ * Structures, enums, and macros for the MAC
++ */
++
++#ifndef _E1000_HW_H_
++#define _E1000_HW_H_
++
++/* Forward declarations of structures used by the shared code */
++struct e1000_hw;
++struct e1000_hw_stats;
++
++/* Enumerated types specific to the e1000 hardware */
++/* Media Access Controlers */
++typedef enum {
++    e1000_undefined = 0,
++    e1000_82542_rev2_0,
++    e1000_82542_rev2_1,
++    e1000_82543,
++    e1000_82544,
++    e1000_82540,
++    e1000_82545,
++    e1000_82545_rev_3,
++    e1000_82546,
++    e1000_82546_rev_3,
++    e1000_82541,
++    e1000_82541_rev_2,
++    e1000_82547,
++    e1000_82547_rev_2,
++    e1000_num_macs
++} e1000_mac_type;
++
++typedef enum {
++    e1000_eeprom_uninitialized = 0,
++    e1000_eeprom_spi,
++    e1000_eeprom_microwire,
++    e1000_num_eeprom_types
++} e1000_eeprom_type;
++
++/* Media Types */
++typedef enum {
++	e1000_media_type_copper = 0,
++	e1000_media_type_fiber = 1,
++	e1000_media_type_internal_serdes = 2,
++	e1000_num_media_types
++} e1000_media_type;
++
++typedef enum {
++    e1000_10_half = 0,
++    e1000_10_full = 1,
++    e1000_100_half = 2,
++    e1000_100_full = 3
++} e1000_speed_duplex_type;
++
++/* Flow Control Settings */
++typedef enum {
++	e1000_fc_none = 0,
++	e1000_fc_rx_pause = 1,
++	e1000_fc_tx_pause = 2,
++	e1000_fc_full = 3,
++	e1000_fc_default = 0xFF
++} e1000_fc_type;
++
++/* PCI bus types */
++typedef enum {
++	e1000_bus_type_unknown = 0,
++	e1000_bus_type_pci,
++	e1000_bus_type_pcix,
++	e1000_bus_type_reserved
++} e1000_bus_type;
++
++/* PCI bus speeds */
++typedef enum {
++	e1000_bus_speed_unknown = 0,
++	e1000_bus_speed_33,
++	e1000_bus_speed_66,
++	e1000_bus_speed_100,
++	e1000_bus_speed_120,
++	e1000_bus_speed_133,
++	e1000_bus_speed_reserved
++} e1000_bus_speed;
++
++/* PCI bus widths */
++typedef enum {
++	e1000_bus_width_unknown = 0,
++	e1000_bus_width_32,
++	e1000_bus_width_64,
++	e1000_bus_width_reserved
++} e1000_bus_width;
++
++/* PHY status info structure and supporting enums */
++typedef enum {
++	e1000_cable_length_50 = 0,
++	e1000_cable_length_50_80,
++	e1000_cable_length_80_110,
++	e1000_cable_length_110_140,
++	e1000_cable_length_140,
++	e1000_cable_length_undefined = 0xFF
++} e1000_cable_length;
++
++typedef enum {
++    e1000_igp_cable_length_10  = 10,
++    e1000_igp_cable_length_20  = 20,
++    e1000_igp_cable_length_30  = 30,
++    e1000_igp_cable_length_40  = 40,
++    e1000_igp_cable_length_50  = 50,
++    e1000_igp_cable_length_60  = 60,
++    e1000_igp_cable_length_70  = 70,
++    e1000_igp_cable_length_80  = 80,
++    e1000_igp_cable_length_90  = 90,
++    e1000_igp_cable_length_100 = 100,
++    e1000_igp_cable_length_110 = 110,
++    e1000_igp_cable_length_120 = 120,
++    e1000_igp_cable_length_130 = 130,
++    e1000_igp_cable_length_140 = 140,
++    e1000_igp_cable_length_150 = 150,
++    e1000_igp_cable_length_160 = 160,
++    e1000_igp_cable_length_170 = 170,
++    e1000_igp_cable_length_180 = 180
++} e1000_igp_cable_length;
++
++typedef enum {
++	e1000_10bt_ext_dist_enable_normal = 0,
++	e1000_10bt_ext_dist_enable_lower,
++	e1000_10bt_ext_dist_enable_undefined = 0xFF
++} e1000_10bt_ext_dist_enable;
++
++typedef enum {
++	e1000_rev_polarity_normal = 0,
++	e1000_rev_polarity_reversed,
++	e1000_rev_polarity_undefined = 0xFF
++} e1000_rev_polarity;
++
++typedef enum {
++    e1000_downshift_normal = 0,
++    e1000_downshift_activated,
++    e1000_downshift_undefined = 0xFF
++} e1000_downshift;
++
++typedef enum {
++	e1000_polarity_reversal_enabled = 0,
++	e1000_polarity_reversal_disabled,
++	e1000_polarity_reversal_undefined = 0xFF
++} e1000_polarity_reversal;
++
++typedef enum {
++	e1000_auto_x_mode_manual_mdi = 0,
++	e1000_auto_x_mode_manual_mdix,
++	e1000_auto_x_mode_auto1,
++	e1000_auto_x_mode_auto2,
++	e1000_auto_x_mode_undefined = 0xFF
++} e1000_auto_x_mode;
++
++typedef enum {
++	e1000_1000t_rx_status_not_ok = 0,
++	e1000_1000t_rx_status_ok,
++	e1000_1000t_rx_status_undefined = 0xFF
++} e1000_1000t_rx_status;
++
++typedef enum {
++    e1000_phy_m88 = 0,
++    e1000_phy_igp,
++    e1000_phy_undefined = 0xFF
++} e1000_phy_type;
++
++typedef enum {
++    e1000_ms_hw_default = 0,
++    e1000_ms_force_master,
++    e1000_ms_force_slave,
++    e1000_ms_auto
++} e1000_ms_type;
++
++typedef enum {
++    e1000_ffe_config_enabled = 0,
++    e1000_ffe_config_active,
++    e1000_ffe_config_blocked
++} e1000_ffe_config;
++
++typedef enum {
++    e1000_dsp_config_disabled = 0,
++    e1000_dsp_config_enabled,
++    e1000_dsp_config_activated,
++    e1000_dsp_config_undefined = 0xFF
++} e1000_dsp_config;
++
++struct e1000_phy_info {
++	e1000_cable_length cable_length;
++	e1000_10bt_ext_dist_enable extended_10bt_distance;
++	e1000_rev_polarity cable_polarity;
++	e1000_downshift downshift;
++	e1000_polarity_reversal polarity_correction;
++	e1000_auto_x_mode mdix_mode;
++	e1000_1000t_rx_status local_rx;
++	e1000_1000t_rx_status remote_rx;
++};
++
++struct e1000_phy_stats {
++	uint32_t idle_errors;
++	uint32_t receive_errors;
++};
++
++struct e1000_eeprom_info {
++    e1000_eeprom_type type;
++    uint16_t word_size;
++    uint16_t opcode_bits;
++    uint16_t address_bits;
++    uint16_t delay_usec;
++    uint16_t page_size;
++};
++
++
++
++/* Error Codes */
++#define E1000_SUCCESS      0
++#define E1000_ERR_EEPROM   1
++#define E1000_ERR_PHY      2
++#define E1000_ERR_CONFIG   3
++#define E1000_ERR_PARAM    4
++#define E1000_ERR_MAC_TYPE 5
++#define E1000_ERR_PHY_TYPE 6
++#define E1000_ERR_NOLINK   7
++#define E1000_ERR_TIMEOUT  8
++
++#define E1000_READ_REG_IO(a, reg) \
++	e1000_read_reg_io((a), E1000_##reg)
++#define E1000_WRITE_REG_IO(a, reg, val) \
++	e1000_write_reg_io((a), E1000_##reg, val)
++
++/* PCI Device IDs */
++#define E1000_DEV_ID_82542               0x1000
++#define E1000_DEV_ID_82543GC_FIBER       0x1001
++#define E1000_DEV_ID_82543GC_COPPER      0x1004
++#define E1000_DEV_ID_82544EI_COPPER      0x1008
++#define E1000_DEV_ID_82544EI_FIBER       0x1009
++#define E1000_DEV_ID_82544GC_COPPER      0x100C
++#define E1000_DEV_ID_82544GC_LOM         0x100D
++#define E1000_DEV_ID_82540EM             0x100E
++#define E1000_DEV_ID_82540EM_LOM         0x1015
++#define E1000_DEV_ID_82540EP_LOM         0x1016
++#define E1000_DEV_ID_82540EP             0x1017
++#define E1000_DEV_ID_82540EP_LP          0x101E
++#define E1000_DEV_ID_82545EM_COPPER      0x100F
++#define E1000_DEV_ID_82545EM_FIBER       0x1011
++#define E1000_DEV_ID_82545GM_COPPER      0x1026
++#define E1000_DEV_ID_82545GM_FIBER       0x1027
++#define E1000_DEV_ID_82545GM_SERDES      0x1028
++#define E1000_DEV_ID_82546EB_COPPER      0x1010
++#define E1000_DEV_ID_82546EB_FIBER       0x1012
++#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
++#define E1000_DEV_ID_82541EI             0x1013
++#define E1000_DEV_ID_82541EI_MOBILE      0x1018
++#define E1000_DEV_ID_82541ER             0x1078
++#define E1000_DEV_ID_82547GI             0x1075
++#define E1000_DEV_ID_82541GI             0x1076
++#define E1000_DEV_ID_82541GI_MOBILE      0x1077
++#define E1000_DEV_ID_82546GB_COPPER      0x1079
++#define E1000_DEV_ID_82546GB_FIBER       0x107A
++#define E1000_DEV_ID_82546GB_SERDES      0x107B
++#define E1000_DEV_ID_82547EI             0x1019
++
++#define NODE_ADDRESS_SIZE 6
++#define ETH_LENGTH_OF_ADDRESS 6
++
++/* MAC decode size is 128K - This is the size of BAR0 */
++#define MAC_DECODE_SIZE (128 * 1024)
++
++#define E1000_82542_2_0_REV_ID 2
++#define E1000_82542_2_1_REV_ID 3
++
++#define SPEED_10    10
++#define SPEED_100   100
++#define SPEED_1000  1000
++#define HALF_DUPLEX 1
++#define FULL_DUPLEX 2
++
++/* The sizes (in bytes) of a ethernet packet */
++#define ENET_HEADER_SIZE             14
++#define MAXIMUM_ETHERNET_FRAME_SIZE  1518 /* With FCS */
++#define MINIMUM_ETHERNET_FRAME_SIZE  64   /* With FCS */
++#define ETHERNET_FCS_SIZE            4
++#define MAXIMUM_ETHERNET_PACKET_SIZE \
++    (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
++#define MINIMUM_ETHERNET_PACKET_SIZE \
++    (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
++#define CRC_LENGTH                   ETHERNET_FCS_SIZE
++#define MAX_JUMBO_FRAME_SIZE         0x3F00
++
++
++/* 802.1q VLAN Packet Sizes */
++#define VLAN_TAG_SIZE                     4     /* 802.3ac tag (not DMAed) */
++
++/* Ethertype field values */
++#define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
++#define ETHERNET_IP_TYPE        0x0800  /* IP packets */
++#define ETHERNET_ARP_TYPE       0x0806  /* Address Resolution Protocol (ARP) */
++
++/* Packet Header defines */
++#define IP_PROTOCOL_TCP    6
++#define IP_PROTOCOL_UDP    0x11
++
++/* This defines the bits that are set in the Interrupt Mask
++ * Set/Read Register.  Each bit is documented below:
++ *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
++ *   o RXSEQ  = Receive Sequence Error 
++ */
++#define POLL_IMS_ENABLE_MASK ( \
++    E1000_IMS_RXDMT0 |         \
++    E1000_IMS_RXSEQ)
++
++/* This defines the bits that are set in the Interrupt Mask
++ * Set/Read Register.  Each bit is documented below:
++ *   o RXT0   = Receiver Timer Interrupt (ring 0)
++ *   o TXDW   = Transmit Descriptor Written Back
++ *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
++ *   o RXSEQ  = Receive Sequence Error
++ *   o LSC    = Link Status Change
++ */
++#define IMS_ENABLE_MASK ( \
++    E1000_IMS_RXT0   |    \
++    E1000_IMS_TXDW   |    \
++    E1000_IMS_RXDMT0 |    \
++    E1000_IMS_RXSEQ  |    \
++    E1000_IMS_LSC)
++
++/* Number of high/low register pairs in the RAR. The RAR (Receive Address
++ * Registers) holds the directed and multicast addresses that we monitor. We
++ * reserve one of these spots for our directed address, allowing us room for
++ * E1000_RAR_ENTRIES - 1 multicast addresses. 
++ */
++#define E1000_RAR_ENTRIES 15
++
++#define MIN_NUMBER_OF_DESCRIPTORS 8
++#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
++
++/* Receive Descriptor */
++struct e1000_rx_desc {
++    uint64_t buffer_addr; /* Address of the descriptor's data buffer */
++    uint16_t length;     /* Length of data DMAed into data buffer */
++    uint16_t csum;       /* Packet checksum */
++    uint8_t status;      /* Descriptor status */
++    uint8_t errors;      /* Descriptor Errors */
++    uint16_t special;
++};
++
++/* Receive Decriptor bit definitions */
++#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
++#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
++#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
++#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
++#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
++#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
++#define E1000_RXD_STAT_PIF      0x80    /* passed in-exact filter */
++#define E1000_RXD_ERR_CE        0x01    /* CRC Error */
++#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
++#define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */
++#define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */
++#define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */
++#define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */
++#define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */
++#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
++#define E1000_RXD_SPC_PRI_MASK  0xE000  /* Priority is in upper 3 bits */
++#define E1000_RXD_SPC_PRI_SHIFT 0x000D  /* Priority is in upper 3 of 16 */
++#define E1000_RXD_SPC_CFI_MASK  0x1000  /* CFI is bit 12 */
++#define E1000_RXD_SPC_CFI_SHIFT 0x000C  /* CFI is bit 12 */
++
++/* mask to determine if packets should be dropped due to frame errors */
++#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
++    E1000_RXD_ERR_CE  |                \
++    E1000_RXD_ERR_SE  |                \
++    E1000_RXD_ERR_SEQ |                \
++    E1000_RXD_ERR_CXE |                \
++    E1000_RXD_ERR_RXE)
++
++/* Transmit Descriptor */
++struct e1000_tx_desc {
++    uint64_t buffer_addr;       /* Address of the descriptor's data buffer */
++    union {
++        uint32_t data;
++        struct {
++            uint16_t length;    /* Data buffer length */
++            uint8_t cso;        /* Checksum offset */
++            uint8_t cmd;        /* Descriptor control */
++        } flags;
++    } lower;
++    union {
++        uint32_t data;
++        struct {
++            uint8_t status;     /* Descriptor status */
++            uint8_t css;        /* Checksum start */
++            uint16_t special;
++        } fields;
++    } upper;
++};
++
++/* Transmit Descriptor bit definitions */
++#define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */
++#define E1000_TXD_DTYP_C     0x00000000 /* Context Descriptor */
++#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
++#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
++#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
++#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
++#define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */
++#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
++#define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */
++#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
++#define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
++#define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */
++#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
++#define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */
++#define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */
++#define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */
++#define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */
++#define E1000_TXD_CMD_IP     0x02000000 /* IP packet */
++#define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */
++#define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */
++
++/* Offload Context Descriptor */
++struct e1000_context_desc {
++    union {
++        uint32_t ip_config;
++        struct {
++            uint8_t ipcss;      /* IP checksum start */
++            uint8_t ipcso;      /* IP checksum offset */
++            uint16_t ipcse;     /* IP checksum end */
++        } ip_fields;
++    } lower_setup;
++    union {
++        uint32_t tcp_config;
++        struct {
++            uint8_t tucss;      /* TCP checksum start */
++            uint8_t tucso;      /* TCP checksum offset */
++            uint16_t tucse;     /* TCP checksum end */
++        } tcp_fields;
++    } upper_setup;
++    uint32_t cmd_and_length;    /* */
++    union {
++        uint32_t data;
++        struct {
++            uint8_t status;     /* Descriptor status */
++            uint8_t hdr_len;    /* Header length */
++            uint16_t mss;       /* Maximum segment size */
++        } fields;
++    } tcp_seg_setup;
++};
++
++/* Offload data descriptor */
++struct e1000_data_desc {
++    uint64_t buffer_addr;       /* Address of the descriptor's buffer address */
++    union {
++        uint32_t data;
++        struct {
++            uint16_t length;    /* Data buffer length */
++            uint8_t typ_len_ext;        /* */
++            uint8_t cmd;        /* */
++        } flags;
++    } lower;
++    union {
++        uint32_t data;
++        struct {
++            uint8_t status;     /* Descriptor status */
++            uint8_t popts;      /* Packet Options */
++            uint16_t special;   /* */
++        } fields;
++    } upper;
++};
++
++/* Filters */
++#define E1000_NUM_UNICAST          16   /* Unicast filter entries */
++#define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
++#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
++
++
++/* Receive Address Register */
++struct e1000_rar {
++    volatile uint32_t low;      /* receive address low */
++    volatile uint32_t high;     /* receive address high */
++};
++
++/* Number of entries in the Multicast Table Array (MTA). */
++#define E1000_NUM_MTA_REGISTERS 128
++
++/* IPv4 Address Table Entry */
++struct e1000_ipv4_at_entry {
++    volatile uint32_t ipv4_addr;        /* IP Address (RW) */
++    volatile uint32_t reserved;
++};
++
++/* Four wakeup IP addresses are supported */
++#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
++#define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
++#define E1000_IP6AT_SIZE                  1
++
++/* IPv6 Address Table Entry */
++struct e1000_ipv6_at_entry {
++    volatile uint8_t ipv6_addr[16];
++};
++
++/* Flexible Filter Length Table Entry */
++struct e1000_fflt_entry {
++    volatile uint32_t length;   /* Flexible Filter Length (RW) */
++    volatile uint32_t reserved;
++};
++
++/* Flexible Filter Mask Table Entry */
++struct e1000_ffmt_entry {
++    volatile uint32_t mask;     /* Flexible Filter Mask (RW) */
++    volatile uint32_t reserved;
++};
++
++/* Flexible Filter Value Table Entry */
++struct e1000_ffvt_entry {
++    volatile uint32_t value;    /* Flexible Filter Value (RW) */
++    volatile uint32_t reserved;
++};
++
++/* Four Flexible Filters are supported */
++#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
++
++/* Each Flexible Filter is at most 128 (0x80) bytes in length */
++#define E1000_FLEXIBLE_FILTER_SIZE_MAX  128
++
++#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
++#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
++#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
++
++/* Register Set. (82543, 82544)
++ *
++ * Registers are defined to be 32 bits and  should be accessed as 32 bit values.
++ * These registers are physically located on the NIC, but are mapped into the 
++ * host memory address space.
++ *
++ * RW - register is both readable and writable
++ * RO - register is read only
++ * WO - register is write only
++ * R/clr - register is read only and is cleared when read
++ * A - register array
++ */
++#define E1000_CTRL     0x00000  /* Device Control - RW */
++#define E1000_CTRL_DUP 0x00004  /* Device Control Duplicate (Shadow) - RW */
++#define E1000_STATUS   0x00008  /* Device Status - RO */
++#define E1000_EECD     0x00010  /* EEPROM/Flash Control - RW */
++#define E1000_EERD     0x00014  /* EEPROM Read - RW */
++#define E1000_CTRL_EXT 0x00018  /* Extended Device Control - RW */
++#define E1000_FLA      0x0001C  /* Flash Access - RW */
++#define E1000_MDIC     0x00020  /* MDI Control - RW */
++#define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
++#define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
++#define E1000_FCT      0x00030  /* Flow Control Type - RW */
++#define E1000_VET      0x00038  /* VLAN Ether Type - RW */
++#define E1000_ICR      0x000C0  /* Interrupt Cause Read - R/clr */
++#define E1000_ITR      0x000C4  /* Interrupt Throttling Rate - RW */
++#define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
++#define E1000_IMS      0x000D0  /* Interrupt Mask Set - RW */
++#define E1000_IMC      0x000D8  /* Interrupt Mask Clear - WO */
++#define E1000_RCTL     0x00100  /* RX Control - RW */
++#define E1000_FCTTV    0x00170  /* Flow Control Transmit Timer Value - RW */
++#define E1000_TXCW     0x00178  /* TX Configuration Word - RW */
++#define E1000_RXCW     0x00180  /* RX Configuration Word - RO */
++#define E1000_TCTL     0x00400  /* TX Control - RW */
++#define E1000_TIPG     0x00410  /* TX Inter-packet gap -RW */
++#define E1000_TBT      0x00448  /* TX Burst Timer - RW */
++#define E1000_AIT      0x00458  /* Adaptive Interframe Spacing Throttle - RW */
++#define E1000_LEDCTL   0x00E00  /* LED Control - RW */
++#define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
++#define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
++#define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
++#define E1000_RDBAL    0x02800  /* RX Descriptor Base Address Low - RW */
++#define E1000_RDBAH    0x02804  /* RX Descriptor Base Address High - RW */
++#define E1000_RDLEN    0x02808  /* RX Descriptor Length - RW */
++#define E1000_RDH      0x02810  /* RX Descriptor Head - RW */
++#define E1000_RDT      0x02818  /* RX Descriptor Tail - RW */
++#define E1000_RDTR     0x02820  /* RX Delay Timer - RW */
++#define E1000_RXDCTL   0x02828  /* RX Descriptor Control - RW */
++#define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
++#define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
++#define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
++#define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
++#define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
++#define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
++#define E1000_TDFTS    0x03428  /* TX Data FIFO Tail Saved - RW */
++#define E1000_TDFPC    0x03430  /* TX Data FIFO Packet Count - RW */
++#define E1000_TDBAL    0x03800  /* TX Descriptor Base Address Low - RW */
++#define E1000_TDBAH    0x03804  /* TX Descriptor Base Address High - RW */
++#define E1000_TDLEN    0x03808  /* TX Descriptor Length - RW */
++#define E1000_TDH      0x03810  /* TX Descriptor Head - RW */
++#define E1000_TDT      0x03818  /* TX Descripotr Tail - RW */
++#define E1000_TIDV     0x03820  /* TX Interrupt Delay Value - RW */
++#define E1000_TXDCTL   0x03828  /* TX Descriptor Control - RW */
++#define E1000_TADV     0x0382C  /* TX Interrupt Absolute Delay Val - RW */
++#define E1000_TSPMT    0x03830  /* TCP Segmentation PAD & Min Threshold - RW */
++#define E1000_CRCERRS  0x04000  /* CRC Error Count - R/clr */
++#define E1000_ALGNERRC 0x04004  /* Alignment Error Count - R/clr */
++#define E1000_SYMERRS  0x04008  /* Symbol Error Count - R/clr */
++#define E1000_RXERRC   0x0400C  /* Receive Error Count - R/clr */
++#define E1000_MPC      0x04010  /* Missed Packet Count - R/clr */
++#define E1000_SCC      0x04014  /* Single Collision Count - R/clr */
++#define E1000_ECOL     0x04018  /* Excessive Collision Count - R/clr */
++#define E1000_MCC      0x0401C  /* Multiple Collision Count - R/clr */
++#define E1000_LATECOL  0x04020  /* Late Collision Count - R/clr */
++#define E1000_COLC     0x04028  /* Collision Count - R/clr */
++#define E1000_DC       0x04030  /* Defer Count - R/clr */
++#define E1000_TNCRS    0x04034  /* TX-No CRS - R/clr */
++#define E1000_SEC      0x04038  /* Sequence Error Count - R/clr */
++#define E1000_CEXTERR  0x0403C  /* Carrier Extension Error Count - R/clr */
++#define E1000_RLEC     0x04040  /* Receive Length Error Count - R/clr */
++#define E1000_XONRXC   0x04048  /* XON RX Count - R/clr */
++#define E1000_XONTXC   0x0404C  /* XON TX Count - R/clr */
++#define E1000_XOFFRXC  0x04050  /* XOFF RX Count - R/clr */
++#define E1000_XOFFTXC  0x04054  /* XOFF TX Count - R/clr */
++#define E1000_FCRUC    0x04058  /* Flow Control RX Unsupported Count- R/clr */
++#define E1000_PRC64    0x0405C  /* Packets RX (64 bytes) - R/clr */
++#define E1000_PRC127   0x04060  /* Packets RX (65-127 bytes) - R/clr */
++#define E1000_PRC255   0x04064  /* Packets RX (128-255 bytes) - R/clr */
++#define E1000_PRC511   0x04068  /* Packets RX (255-511 bytes) - R/clr */
++#define E1000_PRC1023  0x0406C  /* Packets RX (512-1023 bytes) - R/clr */
++#define E1000_PRC1522  0x04070  /* Packets RX (1024-1522 bytes) - R/clr */
++#define E1000_GPRC     0x04074  /* Good Packets RX Count - R/clr */
++#define E1000_BPRC     0x04078  /* Broadcast Packets RX Count - R/clr */
++#define E1000_MPRC     0x0407C  /* Multicast Packets RX Count - R/clr */
++#define E1000_GPTC     0x04080  /* Good Packets TX Count - R/clr */
++#define E1000_GORCL    0x04088  /* Good Octets RX Count Low - R/clr */
++#define E1000_GORCH    0x0408C  /* Good Octets RX Count High - R/clr */
++#define E1000_GOTCL    0x04090  /* Good Octets TX Count Low - R/clr */
++#define E1000_GOTCH    0x04094  /* Good Octets TX Count High - R/clr */
++#define E1000_RNBC     0x040A0  /* RX No Buffers Count - R/clr */
++#define E1000_RUC      0x040A4  /* RX Undersize Count - R/clr */
++#define E1000_RFC      0x040A8  /* RX Fragment Count - R/clr */
++#define E1000_ROC      0x040AC  /* RX Oversize Count - R/clr */
++#define E1000_RJC      0x040B0  /* RX Jabber Count - R/clr */
++#define E1000_MGTPRC   0x040B4  /* Management Packets RX Count - R/clr */
++#define E1000_MGTPDC   0x040B8  /* Management Packets Dropped Count - R/clr */
++#define E1000_MGTPTC   0x040BC  /* Management Packets TX Count - R/clr */
++#define E1000_TORL     0x040C0  /* Total Octets RX Low - R/clr */
++#define E1000_TORH     0x040C4  /* Total Octets RX High - R/clr */
++#define E1000_TOTL     0x040C8  /* Total Octets TX Low - R/clr */
++#define E1000_TOTH     0x040CC  /* Total Octets TX High - R/clr */
++#define E1000_TPR      0x040D0  /* Total Packets RX - R/clr */
++#define E1000_TPT      0x040D4  /* Total Packets TX - R/clr */
++#define E1000_PTC64    0x040D8  /* Packets TX (64 bytes) - R/clr */
++#define E1000_PTC127   0x040DC  /* Packets TX (65-127 bytes) - R/clr */
++#define E1000_PTC255   0x040E0  /* Packets TX (128-255 bytes) - R/clr */
++#define E1000_PTC511   0x040E4  /* Packets TX (256-511 bytes) - R/clr */
++#define E1000_PTC1023  0x040E8  /* Packets TX (512-1023 bytes) - R/clr */
++#define E1000_PTC1522  0x040EC  /* Packets TX (1024-1522 Bytes) - R/clr */
++#define E1000_MPTC     0x040F0  /* Multicast Packets TX Count - R/clr */
++#define E1000_BPTC     0x040F4  /* Broadcast Packets TX Count - R/clr */
++#define E1000_TSCTC    0x040F8  /* TCP Segmentation Context TX - R/clr */
++#define E1000_TSCTFC   0x040FC  /* TCP Segmentation Context TX Fail - R/clr */
++#define E1000_RXCSUM   0x05000  /* RX Checksum Control - RW */
++#define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
++#define E1000_RA       0x05400  /* Receive Address - RW Array */
++#define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
++#define E1000_WUC      0x05800  /* Wakeup Control - RW */
++#define E1000_WUFC     0x05808  /* Wakeup Filter Control - RW */
++#define E1000_WUS      0x05810  /* Wakeup Status - RO */
++#define E1000_MANC     0x05820  /* Management Control - RW */
++#define E1000_IPAV     0x05838  /* IP Address Valid - RW */
++#define E1000_IP4AT    0x05840  /* IPv4 Address Table - RW Array */
++#define E1000_IP6AT    0x05880  /* IPv6 Address Table - RW Array */
++#define E1000_WUPL     0x05900  /* Wakeup Packet Length - RW */
++#define E1000_WUPM     0x05A00  /* Wakeup Packet Memory - RO A */
++#define E1000_FFLT     0x05F00  /* Flexible Filter Length Table - RW Array */
++#define E1000_FFMT     0x09000  /* Flexible Filter Mask Table - RW Array */
++#define E1000_FFVT     0x09800  /* Flexible Filter Value Table - RW Array */
++
++/* Register Set (82542)
++ *
++ * Some of the 82542 registers are located at different offsets than they are
++ * in more current versions of the 8254x. Despite the difference in location,
++ * the registers function in the same manner.
++ */
++#define E1000_82542_CTRL     E1000_CTRL
++#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
++#define E1000_82542_STATUS   E1000_STATUS
++#define E1000_82542_EECD     E1000_EECD
++#define E1000_82542_EERD     E1000_EERD
++#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
++#define E1000_82542_FLA      E1000_FLA
++#define E1000_82542_MDIC     E1000_MDIC
++#define E1000_82542_FCAL     E1000_FCAL
++#define E1000_82542_FCAH     E1000_FCAH
++#define E1000_82542_FCT      E1000_FCT
++#define E1000_82542_VET      E1000_VET
++#define E1000_82542_RA       0x00040
++#define E1000_82542_ICR      E1000_ICR
++#define E1000_82542_ITR      E1000_ITR
++#define E1000_82542_ICS      E1000_ICS
++#define E1000_82542_IMS      E1000_IMS
++#define E1000_82542_IMC      E1000_IMC
++#define E1000_82542_RCTL     E1000_RCTL
++#define E1000_82542_RDTR     0x00108
++#define E1000_82542_RDBAL    0x00110
++#define E1000_82542_RDBAH    0x00114
++#define E1000_82542_RDLEN    0x00118
++#define E1000_82542_RDH      0x00120
++#define E1000_82542_RDT      0x00128
++#define E1000_82542_FCRTH    0x00160
++#define E1000_82542_FCRTL    0x00168
++#define E1000_82542_FCTTV    E1000_FCTTV
++#define E1000_82542_TXCW     E1000_TXCW
++#define E1000_82542_RXCW     E1000_RXCW
++#define E1000_82542_MTA      0x00200
++#define E1000_82542_TCTL     E1000_TCTL
++#define E1000_82542_TIPG     E1000_TIPG
++#define E1000_82542_TDBAL    0x00420
++#define E1000_82542_TDBAH    0x00424
++#define E1000_82542_TDLEN    0x00428
++#define E1000_82542_TDH      0x00430
++#define E1000_82542_TDT      0x00438
++#define E1000_82542_TIDV     0x00440
++#define E1000_82542_TBT      E1000_TBT
++#define E1000_82542_AIT      E1000_AIT
++#define E1000_82542_VFTA     0x00600
++#define E1000_82542_LEDCTL   E1000_LEDCTL
++#define E1000_82542_PBA      E1000_PBA
++#define E1000_82542_RXDCTL   E1000_RXDCTL
++#define E1000_82542_RADV     E1000_RADV
++#define E1000_82542_RSRPD    E1000_RSRPD
++#define E1000_82542_TXDMAC   E1000_TXDMAC
++#define E1000_82542_TDFHS    E1000_TDFHS
++#define E1000_82542_TDFTS    E1000_TDFTS
++#define E1000_82542_TDFPC    E1000_TDFPC
++#define E1000_82542_TXDCTL   E1000_TXDCTL
++#define E1000_82542_TADV     E1000_TADV
++#define E1000_82542_TSPMT    E1000_TSPMT
++#define E1000_82542_CRCERRS  E1000_CRCERRS
++#define E1000_82542_ALGNERRC E1000_ALGNERRC
++#define E1000_82542_SYMERRS  E1000_SYMERRS
++#define E1000_82542_RXERRC   E1000_RXERRC
++#define E1000_82542_MPC      E1000_MPC
++#define E1000_82542_SCC      E1000_SCC
++#define E1000_82542_ECOL     E1000_ECOL
++#define E1000_82542_MCC      E1000_MCC
++#define E1000_82542_LATECOL  E1000_LATECOL
++#define E1000_82542_COLC     E1000_COLC
++#define E1000_82542_DC       E1000_DC
++#define E1000_82542_TNCRS    E1000_TNCRS
++#define E1000_82542_SEC      E1000_SEC
++#define E1000_82542_CEXTERR  E1000_CEXTERR
++#define E1000_82542_RLEC     E1000_RLEC
++#define E1000_82542_XONRXC   E1000_XONRXC
++#define E1000_82542_XONTXC   E1000_XONTXC
++#define E1000_82542_XOFFRXC  E1000_XOFFRXC
++#define E1000_82542_XOFFTXC  E1000_XOFFTXC
++#define E1000_82542_FCRUC    E1000_FCRUC
++#define E1000_82542_PRC64    E1000_PRC64
++#define E1000_82542_PRC127   E1000_PRC127
++#define E1000_82542_PRC255   E1000_PRC255
++#define E1000_82542_PRC511   E1000_PRC511
++#define E1000_82542_PRC1023  E1000_PRC1023
++#define E1000_82542_PRC1522  E1000_PRC1522
++#define E1000_82542_GPRC     E1000_GPRC
++#define E1000_82542_BPRC     E1000_BPRC
++#define E1000_82542_MPRC     E1000_MPRC
++#define E1000_82542_GPTC     E1000_GPTC
++#define E1000_82542_GORCL    E1000_GORCL
++#define E1000_82542_GORCH    E1000_GORCH
++#define E1000_82542_GOTCL    E1000_GOTCL
++#define E1000_82542_GOTCH    E1000_GOTCH
++#define E1000_82542_RNBC     E1000_RNBC
++#define E1000_82542_RUC      E1000_RUC
++#define E1000_82542_RFC      E1000_RFC
++#define E1000_82542_ROC      E1000_ROC
++#define E1000_82542_RJC      E1000_RJC
++#define E1000_82542_MGTPRC   E1000_MGTPRC
++#define E1000_82542_MGTPDC   E1000_MGTPDC
++#define E1000_82542_MGTPTC   E1000_MGTPTC
++#define E1000_82542_TORL     E1000_TORL
++#define E1000_82542_TORH     E1000_TORH
++#define E1000_82542_TOTL     E1000_TOTL
++#define E1000_82542_TOTH     E1000_TOTH
++#define E1000_82542_TPR      E1000_TPR
++#define E1000_82542_TPT      E1000_TPT
++#define E1000_82542_PTC64    E1000_PTC64
++#define E1000_82542_PTC127   E1000_PTC127
++#define E1000_82542_PTC255   E1000_PTC255
++#define E1000_82542_PTC511   E1000_PTC511
++#define E1000_82542_PTC1023  E1000_PTC1023
++#define E1000_82542_PTC1522  E1000_PTC1522
++#define E1000_82542_MPTC     E1000_MPTC
++#define E1000_82542_BPTC     E1000_BPTC
++#define E1000_82542_TSCTC    E1000_TSCTC
++#define E1000_82542_TSCTFC   E1000_TSCTFC
++#define E1000_82542_RXCSUM   E1000_RXCSUM
++#define E1000_82542_WUC      E1000_WUC
++#define E1000_82542_WUFC     E1000_WUFC
++#define E1000_82542_WUS      E1000_WUS
++#define E1000_82542_MANC     E1000_MANC
++#define E1000_82542_IPAV     E1000_IPAV
++#define E1000_82542_IP4AT    E1000_IP4AT
++#define E1000_82542_IP6AT    E1000_IP6AT
++#define E1000_82542_WUPL     E1000_WUPL
++#define E1000_82542_WUPM     E1000_WUPM
++#define E1000_82542_FFLT     E1000_FFLT
++#define E1000_82542_TDFH     0x08010
++#define E1000_82542_TDFT     0x08018
++#define E1000_82542_FFMT     E1000_FFMT
++#define E1000_82542_FFVT     E1000_FFVT
++
++/* Statistics counters collected by the MAC */
++struct e1000_hw_stats {
++    uint64_t crcerrs;
++    uint64_t algnerrc;
++    uint64_t symerrs;
++    uint64_t rxerrc;
++    uint64_t mpc;
++    uint64_t scc;
++    uint64_t ecol;
++    uint64_t mcc;
++    uint64_t latecol;
++    uint64_t colc;
++    uint64_t dc;
++    uint64_t tncrs;
++    uint64_t sec;
++    uint64_t cexterr;
++    uint64_t rlec;
++    uint64_t xonrxc;
++    uint64_t xontxc;
++    uint64_t xoffrxc;
++    uint64_t xofftxc;
++    uint64_t fcruc;
++    uint64_t prc64;
++    uint64_t prc127;
++    uint64_t prc255;
++    uint64_t prc511;
++    uint64_t prc1023;
++    uint64_t prc1522;
++    uint64_t gprc;
++    uint64_t bprc;
++    uint64_t mprc;
++    uint64_t gptc;
++    uint64_t gorcl;
++    uint64_t gorch;
++    uint64_t gotcl;
++    uint64_t gotch;
++    uint64_t rnbc;
++    uint64_t ruc;
++    uint64_t rfc;
++    uint64_t roc;
++    uint64_t rjc;
++    uint64_t mgprc;
++    uint64_t mgpdc;
++    uint64_t mgptc;
++    uint64_t torl;
++    uint64_t torh;
++    uint64_t totl;
++    uint64_t toth;
++    uint64_t tpr;
++    uint64_t tpt;
++    uint64_t ptc64;
++    uint64_t ptc127;
++    uint64_t ptc255;
++    uint64_t ptc511;
++    uint64_t ptc1023;
++    uint64_t ptc1522;
++    uint64_t mptc;
++    uint64_t bptc;
++    uint64_t tsctc;
++    uint64_t tsctfc;
++};
++
++/* Structure containing variables used by the shared code (e1000_hw.c) */
++struct e1000_hw {
++	struct pci_device *pdev;
++	uint8_t *hw_addr;
++	e1000_mac_type   mac_type;
++	e1000_phy_type phy_type;
++#if 0
++	uint32_t phy_init_script;
++#endif
++	e1000_media_type media_type;
++	e1000_fc_type    fc;
++#if 0
++	e1000_bus_speed bus_speed;
++	e1000_bus_width bus_width;
++	e1000_bus_type  bus_type;
++#endif
++	struct e1000_eeprom_info eeprom;
++#if 0
++	e1000_ms_type master_slave;
++	e1000_ms_type original_master_slave;
++	e1000_ffe_config ffe_config_state;
++#endif
++	uint32_t io_base;
++	uint32_t phy_id;
++#ifdef LINUX_DRIVER
++	uint32_t phy_revision;
++#endif
++	uint32_t phy_addr;
++#if 0
++	uint32_t original_fc;
++#endif
++	uint32_t txcw;
++	uint32_t autoneg_failed;
++#if 0
++	uint32_t max_frame_size;
++	uint32_t min_frame_size;
++	uint32_t mc_filter_type;
++	uint32_t num_mc_addrs;
++	uint32_t collision_delta;
++	uint32_t tx_packet_delta;
++	uint32_t ledctl_default;
++	uint32_t ledctl_mode1;
++	uint32_t ledctl_mode2;
++	uint16_t phy_spd_default;
++#endif
++	uint16_t autoneg_advertised;
++	uint16_t pci_cmd_word;
++#if 0
++	uint16_t fc_high_water;
++	uint16_t fc_low_water;
++	uint16_t fc_pause_time;
++	uint16_t current_ifs_val;
++	uint16_t ifs_min_val;
++	uint16_t ifs_max_val;
++	uint16_t ifs_step_size;
++	uint16_t ifs_ratio;
++#endif
++	uint16_t device_id;
++	uint16_t vendor_id;
++#if 0
++	uint16_t subsystem_id;
++	uint16_t subsystem_vendor_id;
++#endif
++	uint8_t revision_id;
++#if 0
++	uint8_t autoneg;
++	uint8_t mdix;
++	uint8_t forced_speed_duplex;
++	uint8_t wait_autoneg_complete;
++	uint8_t dma_fairness;
++#endif
++	uint8_t mac_addr[NODE_ADDRESS_SIZE];
++#if 0
++	uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
++	boolean_t disable_polarity_correction;
++	boolean_t speed_downgraded;
++	e1000_dsp_config dsp_config_state;
++	boolean_t get_link_status;
++	boolean_t serdes_link_down;
++#endif
++	boolean_t tbi_compatibility_en;
++	boolean_t tbi_compatibility_on;
++#if 0
++	boolean_t phy_reset_disable;
++	boolean_t fc_send_xon;
++	boolean_t fc_strict_ieee;
++	boolean_t report_tx_early;
++	boolean_t adaptive_ifs;
++	boolean_t ifs_params_forced;
++	boolean_t in_ifs_mode;
++#endif
++};
++
++
++#define E1000_EEPROM_SWDPIN0   0x0001   /* SWDPIN 0 EEPROM Value */
++#define E1000_EEPROM_LED_LOGIC 0x0020   /* Led Logic Word */
++
++/* Register Bit Masks */
++/* Device Control */
++#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
++#define E1000_CTRL_BEM      0x00000002  /* Endian Mode.0=little,1=big */
++#define E1000_CTRL_PRIOR    0x00000004  /* Priority on PCI. 0=rx,1=fair */
++#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
++#define E1000_CTRL_TME      0x00000010  /* Test mode. 0=normal,1=test */
++#define E1000_CTRL_SLE      0x00000020  /* Serial Link on 0=dis,1=en */
++#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
++#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
++#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
++#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
++#define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */
++#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
++#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
++#define E1000_CTRL_BEM32    0x00000400  /* Big Endian 32 mode */
++#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
++#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
++#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
++#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
++#define E1000_CTRL_SWDPIN2  0x00100000  /* SWDPIN 2 value */
++#define E1000_CTRL_SWDPIN3  0x00200000  /* SWDPIN 3 value */
++#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
++#define E1000_CTRL_SWDPIO1  0x00800000  /* SWDPIN 1 input or output */
++#define E1000_CTRL_SWDPIO2  0x01000000  /* SWDPIN 2 input or output */
++#define E1000_CTRL_SWDPIO3  0x02000000  /* SWDPIN 3 input or output */
++#define E1000_CTRL_RST      0x04000000  /* Global reset */
++#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
++#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
++#define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
++#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
++#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
++
++/* Device Status */
++#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
++#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
++#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
++#define E1000_STATUS_FUNC_0     0x00000000      /* Function 0 */
++#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
++#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
++#define E1000_STATUS_TBIMODE    0x00000020      /* TBI mode */
++#define E1000_STATUS_SPEED_MASK 0x000000C0
++#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
++#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
++#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
++#define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
++#define E1000_STATUS_MTXCKOK    0x00000400      /* MTX clock running OK */
++#define E1000_STATUS_PCI66      0x00000800      /* In 66Mhz slot */
++#define E1000_STATUS_BUS64      0x00001000      /* In 64 bit slot */
++#define E1000_STATUS_PCIX_MODE  0x00002000      /* PCI-X mode */
++#define E1000_STATUS_PCIX_SPEED 0x0000C000      /* PCI-X bus speed */
++
++/* Constants used to intrepret the masked PCI-X bus speed. */
++#define E1000_STATUS_PCIX_SPEED_66  0x00000000 /* PCI-X bus speed  50-66 MHz */
++#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed  66-100 MHz */
++#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
++
++/* EEPROM/Flash Control */
++#define E1000_EECD_SK        0x00000001 /* EEPROM Clock */
++#define E1000_EECD_CS        0x00000002 /* EEPROM Chip Select */
++#define E1000_EECD_DI        0x00000004 /* EEPROM Data In */
++#define E1000_EECD_DO        0x00000008 /* EEPROM Data Out */
++#define E1000_EECD_FWE_MASK  0x00000030 
++#define E1000_EECD_FWE_DIS   0x00000010 /* Disable FLASH writes */
++#define E1000_EECD_FWE_EN    0x00000020 /* Enable FLASH writes */
++#define E1000_EECD_FWE_SHIFT 4
++#define E1000_EECD_REQ       0x00000040 /* EEPROM Access Request */
++#define E1000_EECD_GNT       0x00000080 /* EEPROM Access Grant */
++#define E1000_EECD_PRES      0x00000100 /* EEPROM Present */
++#define E1000_EECD_SIZE      0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
++#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
++                                         * (0-small, 1-large) */
++#define E1000_EECD_TYPE      0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
++#ifndef E1000_EEPROM_GRANT_ATTEMPTS
++#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
++#endif
++
++/* EEPROM Read */
++#define E1000_EERD_START      0x00000001 /* Start Read */
++#define E1000_EERD_DONE       0x00000010 /* Read Done */
++#define E1000_EERD_ADDR_SHIFT 8
++#define E1000_EERD_ADDR_MASK  0x0000FF00 /* Read Address */
++#define E1000_EERD_DATA_SHIFT 16
++#define E1000_EERD_DATA_MASK  0xFFFF0000 /* Read Data */
++
++/* SPI EEPROM Status Register */
++#define EEPROM_STATUS_RDY_SPI  0x01
++#define EEPROM_STATUS_WEN_SPI  0x02
++#define EEPROM_STATUS_BP0_SPI  0x04
++#define EEPROM_STATUS_BP1_SPI  0x08
++#define EEPROM_STATUS_WPEN_SPI 0x80
++
++/* Extended Device Control */
++#define E1000_CTRL_EXT_GPI0_EN   0x00000001 /* Maps SDP4 to GPI0 */ 
++#define E1000_CTRL_EXT_GPI1_EN   0x00000002 /* Maps SDP5 to GPI1 */
++#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
++#define E1000_CTRL_EXT_GPI2_EN   0x00000004 /* Maps SDP6 to GPI2 */
++#define E1000_CTRL_EXT_GPI3_EN   0x00000008 /* Maps SDP7 to GPI3 */
++#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
++#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
++#define E1000_CTRL_EXT_PHY_INT   E1000_CTRL_EXT_SDP5_DATA
++#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
++#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
++#define E1000_CTRL_EXT_SDP4_DIR  0x00000100 /* Direction of SDP4 0=in 1=out */
++#define E1000_CTRL_EXT_SDP5_DIR  0x00000200 /* Direction of SDP5 0=in 1=out */
++#define E1000_CTRL_EXT_SDP6_DIR  0x00000400 /* Direction of SDP6 0=in 1=out */
++#define E1000_CTRL_EXT_SDP7_DIR  0x00000800 /* Direction of SDP7 0=in 1=out */
++#define E1000_CTRL_EXT_ASDCHK    0x00001000 /* Initiate an ASD sequence */
++#define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
++#define E1000_CTRL_EXT_IPS       0x00004000 /* Invert Power State */
++#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */
++#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
++#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
++#define E1000_CTRL_EXT_LINK_MODE_TBI  0x00C00000
++#define E1000_CTRL_EXT_WR_WMARK_MASK  0x03000000
++#define E1000_CTRL_EXT_WR_WMARK_256   0x00000000
++#define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
++#define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
++#define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
++
++/* MDI Control */
++#define E1000_MDIC_DATA_MASK 0x0000FFFF
++#define E1000_MDIC_REG_MASK  0x001F0000
++#define E1000_MDIC_REG_SHIFT 16
++#define E1000_MDIC_PHY_MASK  0x03E00000
++#define E1000_MDIC_PHY_SHIFT 21
++#define E1000_MDIC_OP_WRITE  0x04000000
++#define E1000_MDIC_OP_READ   0x08000000
++#define E1000_MDIC_READY     0x10000000
++#define E1000_MDIC_INT_EN    0x20000000
++#define E1000_MDIC_ERROR     0x40000000
++
++/* LED Control */
++#define E1000_LEDCTL_LED0_MODE_MASK  0x0000000F
++#define E1000_LEDCTL_LED0_MODE_SHIFT 0
++#define E1000_LEDCTL_LED0_IVRT       0x00000040
++#define E1000_LEDCTL_LED0_BLINK      0x00000080
++#define E1000_LEDCTL_LED1_MODE_MASK  0x00000F00
++#define E1000_LEDCTL_LED1_MODE_SHIFT 8
++#define E1000_LEDCTL_LED1_IVRT       0x00004000
++#define E1000_LEDCTL_LED1_BLINK      0x00008000
++#define E1000_LEDCTL_LED2_MODE_MASK  0x000F0000
++#define E1000_LEDCTL_LED2_MODE_SHIFT 16
++#define E1000_LEDCTL_LED2_IVRT       0x00400000
++#define E1000_LEDCTL_LED2_BLINK      0x00800000
++#define E1000_LEDCTL_LED3_MODE_MASK  0x0F000000
++#define E1000_LEDCTL_LED3_MODE_SHIFT 24
++#define E1000_LEDCTL_LED3_IVRT       0x40000000
++#define E1000_LEDCTL_LED3_BLINK      0x80000000
++
++#define E1000_LEDCTL_MODE_LINK_10_1000  0x0
++#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
++#define E1000_LEDCTL_MODE_LINK_UP       0x2
++#define E1000_LEDCTL_MODE_ACTIVITY      0x3
++#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
++#define E1000_LEDCTL_MODE_LINK_10       0x5
++#define E1000_LEDCTL_MODE_LINK_100      0x6
++#define E1000_LEDCTL_MODE_LINK_1000     0x7
++#define E1000_LEDCTL_MODE_PCIX_MODE     0x8
++#define E1000_LEDCTL_MODE_FULL_DUPLEX   0x9
++#define E1000_LEDCTL_MODE_COLLISION     0xA
++#define E1000_LEDCTL_MODE_BUS_SPEED     0xB
++#define E1000_LEDCTL_MODE_BUS_SIZE      0xC
++#define E1000_LEDCTL_MODE_PAUSED        0xD
++#define E1000_LEDCTL_MODE_LED_ON        0xE
++#define E1000_LEDCTL_MODE_LED_OFF       0xF
++
++/* Receive Address */
++#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
++
++/* Interrupt Cause Read */
++#define E1000_ICR_TXDW    0x00000001    /* Transmit desc written back */
++#define E1000_ICR_TXQE    0x00000002    /* Transmit Queue empty */
++#define E1000_ICR_LSC     0x00000004    /* Link Status Change */
++#define E1000_ICR_RXSEQ   0x00000008    /* rx sequence error */
++#define E1000_ICR_RXDMT0  0x00000010    /* rx desc min. threshold (0) */
++#define E1000_ICR_RXO     0x00000040    /* rx overrun */
++#define E1000_ICR_RXT0    0x00000080    /* rx timer intr (ring 0) */
++#define E1000_ICR_MDAC    0x00000200    /* MDIO access complete */
++#define E1000_ICR_RXCFG   0x00000400    /* RX /c/ ordered set */
++#define E1000_ICR_GPI_EN0 0x00000800    /* GP Int 0 */
++#define E1000_ICR_GPI_EN1 0x00001000    /* GP Int 1 */
++#define E1000_ICR_GPI_EN2 0x00002000    /* GP Int 2 */
++#define E1000_ICR_GPI_EN3 0x00004000    /* GP Int 3 */
++#define E1000_ICR_TXD_LOW 0x00008000
++#define E1000_ICR_SRPD    0x00010000
++
++/* Interrupt Cause Set */
++#define E1000_ICS_TXDW    E1000_ICR_TXDW        /* Transmit desc written back */
++#define E1000_ICS_TXQE    E1000_ICR_TXQE        /* Transmit Queue empty */
++#define E1000_ICS_LSC     E1000_ICR_LSC         /* Link Status Change */
++#define E1000_ICS_RXSEQ   E1000_ICR_RXSEQ       /* rx sequence error */
++#define E1000_ICS_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
++#define E1000_ICS_RXO     E1000_ICR_RXO         /* rx overrun */
++#define E1000_ICS_RXT0    E1000_ICR_RXT0        /* rx timer intr */
++#define E1000_ICS_MDAC    E1000_ICR_MDAC        /* MDIO access complete */
++#define E1000_ICS_RXCFG   E1000_ICR_RXCFG       /* RX /c/ ordered set */
++#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
++#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
++#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
++#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
++#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
++#define E1000_ICS_SRPD    E1000_ICR_SRPD
++
++/* Interrupt Mask Set */
++#define E1000_IMS_TXDW    E1000_ICR_TXDW        /* Transmit desc written back */
++#define E1000_IMS_TXQE    E1000_ICR_TXQE        /* Transmit Queue empty */
++#define E1000_IMS_LSC     E1000_ICR_LSC         /* Link Status Change */
++#define E1000_IMS_RXSEQ   E1000_ICR_RXSEQ       /* rx sequence error */
++#define E1000_IMS_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
++#define E1000_IMS_RXO     E1000_ICR_RXO         /* rx overrun */
++#define E1000_IMS_RXT0    E1000_ICR_RXT0        /* rx timer intr */
++#define E1000_IMS_MDAC    E1000_ICR_MDAC        /* MDIO access complete */
++#define E1000_IMS_RXCFG   E1000_ICR_RXCFG       /* RX /c/ ordered set */
++#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
++#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
++#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
++#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
++#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
++#define E1000_IMS_SRPD    E1000_ICR_SRPD
++
++/* Interrupt Mask Clear */
++#define E1000_IMC_TXDW    E1000_ICR_TXDW        /* Transmit desc written back */
++#define E1000_IMC_TXQE    E1000_ICR_TXQE        /* Transmit Queue empty */
++#define E1000_IMC_LSC     E1000_ICR_LSC         /* Link Status Change */
++#define E1000_IMC_RXSEQ   E1000_ICR_RXSEQ       /* rx sequence error */
++#define E1000_IMC_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
++#define E1000_IMC_RXO     E1000_ICR_RXO         /* rx overrun */
++#define E1000_IMC_RXT0    E1000_ICR_RXT0        /* rx timer intr */
++#define E1000_IMC_MDAC    E1000_ICR_MDAC        /* MDIO access complete */
++#define E1000_IMC_RXCFG   E1000_ICR_RXCFG       /* RX /c/ ordered set */
++#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
++#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
++#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
++#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
++#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
++#define E1000_IMC_SRPD    E1000_ICR_SRPD
++
++/* Receive Control */
++#define E1000_RCTL_RST          0x00000001      /* Software reset */
++#define E1000_RCTL_EN           0x00000002      /* enable */
++#define E1000_RCTL_SBP          0x00000004      /* store bad packet */
++#define E1000_RCTL_UPE          0x00000008      /* unicast promiscuous enable */
++#define E1000_RCTL_MPE          0x00000010      /* multicast promiscuous enab */
++#define E1000_RCTL_LPE          0x00000020      /* long packet enable */
++#define E1000_RCTL_LBM_NO       0x00000000      /* no loopback mode */
++#define E1000_RCTL_LBM_MAC      0x00000040      /* MAC loopback mode */
++#define E1000_RCTL_LBM_SLP      0x00000080      /* serial link loopback mode */
++#define E1000_RCTL_LBM_TCVR     0x000000C0      /* tcvr loopback mode */
++#define E1000_RCTL_RDMTS_HALF   0x00000000      /* rx desc min threshold size */
++#define E1000_RCTL_RDMTS_QUAT   0x00000100      /* rx desc min threshold size */
++#define E1000_RCTL_RDMTS_EIGTH  0x00000200      /* rx desc min threshold size */
++#define E1000_RCTL_MO_SHIFT     12              /* multicast offset shift */
++#define E1000_RCTL_MO_0         0x00000000      /* multicast offset 11:0 */
++#define E1000_RCTL_MO_1         0x00001000      /* multicast offset 12:1 */
++#define E1000_RCTL_MO_2         0x00002000      /* multicast offset 13:2 */
++#define E1000_RCTL_MO_3         0x00003000      /* multicast offset 15:4 */
++#define E1000_RCTL_MDR          0x00004000      /* multicast desc ring 0 */
++#define E1000_RCTL_BAM          0x00008000      /* broadcast enable */
++/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
++#define E1000_RCTL_SZ_2048      0x00000000      /* rx buffer size 2048 */
++#define E1000_RCTL_SZ_1024      0x00010000      /* rx buffer size 1024 */
++#define E1000_RCTL_SZ_512       0x00020000      /* rx buffer size 512 */
++#define E1000_RCTL_SZ_256       0x00030000      /* rx buffer size 256 */
++/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
++#define E1000_RCTL_SZ_16384     0x00010000      /* rx buffer size 16384 */
++#define E1000_RCTL_SZ_8192      0x00020000      /* rx buffer size 8192 */
++#define E1000_RCTL_SZ_4096      0x00030000      /* rx buffer size 4096 */
++#define E1000_RCTL_VFE          0x00040000      /* vlan filter enable */
++#define E1000_RCTL_CFIEN        0x00080000      /* canonical form enable */
++#define E1000_RCTL_CFI          0x00100000      /* canonical form indicator */
++#define E1000_RCTL_DPF          0x00400000      /* discard pause frames */
++#define E1000_RCTL_PMCF         0x00800000      /* pass MAC control frames */
++#define E1000_RCTL_BSEX         0x02000000      /* Buffer size extension */
++
++/* Receive Descriptor */
++#define E1000_RDT_DELAY 0x0000ffff      /* Delay timer (1=1024us) */
++#define E1000_RDT_FPDB  0x80000000      /* Flush descriptor block */
++#define E1000_RDLEN_LEN 0x0007ff80      /* descriptor length */
++#define E1000_RDH_RDH   0x0000ffff      /* receive descriptor head */
++#define E1000_RDT_RDT   0x0000ffff      /* receive descriptor tail */
++
++/* Flow Control */
++#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
++#define E1000_FCRTH_XFCE 0x80000000     /* External Flow Control Enable */
++#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
++#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
++
++/* Receive Descriptor Control */
++#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
++#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
++#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
++#define E1000_RXDCTL_GRAN    0x01000000 /* RXDCTL Granularity */
++
++/* Transmit Descriptor Control */
++#define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */
++#define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */
++#define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */
++#define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */
++#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
++#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
++
++/* Transmit Configuration Word */
++#define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */
++#define E1000_TXCW_HD         0x00000040        /* TXCW half duplex */
++#define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */
++#define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */
++#define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */
++#define E1000_TXCW_RF         0x00003000        /* TXCW remote fault */
++#define E1000_TXCW_NP         0x00008000        /* TXCW next page */
++#define E1000_TXCW_CW         0x0000ffff        /* TxConfigWord mask */
++#define E1000_TXCW_TXC        0x40000000        /* Transmit Config control */
++#define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
++
++/* Receive Configuration Word */
++#define E1000_RXCW_CW    0x0000ffff     /* RxConfigWord mask */
++#define E1000_RXCW_NC    0x04000000     /* Receive config no carrier */
++#define E1000_RXCW_IV    0x08000000     /* Receive config invalid */
++#define E1000_RXCW_CC    0x10000000     /* Receive config change */
++#define E1000_RXCW_C     0x20000000     /* Receive config */
++#define E1000_RXCW_SYNCH 0x40000000     /* Receive config synch */
++#define E1000_RXCW_ANC   0x80000000     /* Auto-neg complete */
++
++/* Transmit Control */
++#define E1000_TCTL_RST    0x00000001    /* software reset */
++#define E1000_TCTL_EN     0x00000002    /* enable tx */
++#define E1000_TCTL_BCE    0x00000004    /* busy check enable */
++#define E1000_TCTL_PSP    0x00000008    /* pad short packets */
++#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
++#define E1000_TCTL_COLD   0x003ff000    /* collision distance */
++#define E1000_TCTL_SWXOFF 0x00400000    /* SW Xoff transmission */
++#define E1000_TCTL_PBE    0x00800000    /* Packet Burst Enable */
++#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
++#define E1000_TCTL_NRTU   0x02000000    /* No Re-transmit on underrun */
++
++/* Receive Checksum Control */
++#define E1000_RXCSUM_PCSS_MASK 0x000000FF   /* Packet Checksum Start */
++#define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
++#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
++#define E1000_RXCSUM_IPV6OFL   0x00000400   /* IPv6 checksum offload */
++
++/* Definitions for power management and wakeup registers */
++/* Wake Up Control */
++#define E1000_WUC_APME       0x00000001 /* APM Enable */
++#define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
++#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
++#define E1000_WUC_APMPME     0x00000008 /* Assert PME on APM Wakeup */
++#define E1000_WUC_SPM        0x80000000 /* Enable SPM */
++
++/* Wake Up Filter Control */
++#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
++#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
++#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
++#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
++#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
++#define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
++#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
++#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
++#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
++#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
++#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
++#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
++#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
++#define E1000_WUFC_FLX_OFFSET 16       /* Offset to the Flexible Filters bits */
++#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
++
++/* Wake Up Status */
++#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
++#define E1000_WUS_MAG  0x00000002 /* Magic Packet Received */
++#define E1000_WUS_EX   0x00000004 /* Directed Exact Received */
++#define E1000_WUS_MC   0x00000008 /* Directed Multicast Received */
++#define E1000_WUS_BC   0x00000010 /* Broadcast Received */
++#define E1000_WUS_ARP  0x00000020 /* ARP Request Packet Received */
++#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
++#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
++#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
++#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
++#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
++#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
++#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
++
++/* Management Control */
++#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
++#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
++#define E1000_MANC_R_ON_FORCE    0x00000004 /* Reset on Force TCO - RO */
++#define E1000_MANC_RMCP_EN       0x00000100 /* Enable RCMP 026Fh Filtering */
++#define E1000_MANC_0298_EN       0x00000200 /* Enable RCMP 0298h Filtering */
++#define E1000_MANC_IPV4_EN       0x00000400 /* Enable IPv4 */
++#define E1000_MANC_IPV6_EN       0x00000800 /* Enable IPv6 */
++#define E1000_MANC_SNAP_EN       0x00001000 /* Accept LLC/SNAP */
++#define E1000_MANC_ARP_EN        0x00002000 /* Enable ARP Request Filtering */
++#define E1000_MANC_NEIGHBOR_EN   0x00004000 /* Enable Neighbor Discovery 
++                                             * Filtering */
++#define E1000_MANC_TCO_RESET     0x00010000 /* TCO Reset Occurred */
++#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
++#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
++#define E1000_MANC_SMB_REQ       0x01000000 /* SMBus Request */
++#define E1000_MANC_SMB_GNT       0x02000000 /* SMBus Grant */
++#define E1000_MANC_SMB_CLK_IN    0x04000000 /* SMBus Clock In */
++#define E1000_MANC_SMB_DATA_IN   0x08000000 /* SMBus Data In */
++#define E1000_MANC_SMB_DATA_OUT  0x10000000 /* SMBus Data Out */
++#define E1000_MANC_SMB_CLK_OUT   0x20000000 /* SMBus Clock Out */
++
++#define E1000_MANC_SMB_DATA_OUT_SHIFT  28 /* SMBus Data Out Shift */
++#define E1000_MANC_SMB_CLK_OUT_SHIFT   29 /* SMBus Clock Out Shift */
++
++/* Wake Up Packet Length */
++#define E1000_WUPL_LENGTH_MASK 0x0FFF   /* Only the lower 12 bits are valid */
++
++#define E1000_MDALIGN          4096
++
++/* EEPROM Commands - Microwire */
++#define EEPROM_READ_OPCODE_MICROWIRE  0x6  /* EEPROM read opcode */
++#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5  /* EEPROM write opcode */
++#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7  /* EEPROM erase opcode */
++#define EEPROM_EWEN_OPCODE_MICROWIRE  0x13 /* EEPROM erase/write enable */
++#define EEPROM_EWDS_OPCODE_MICROWIRE  0x10 /* EEPROM erast/write disable */
++
++/* EEPROM Commands - SPI */
++#define EEPROM_MAX_RETRY_SPI    5000 /* Max wait of 5ms, for RDY signal */
++#define EEPROM_READ_OPCODE_SPI  0x3  /* EEPROM read opcode */
++#define EEPROM_WRITE_OPCODE_SPI 0x2  /* EEPROM write opcode */
++#define EEPROM_A8_OPCODE_SPI    0x8  /* opcode bit-3 = address bit-8 */
++#define EEPROM_WREN_OPCODE_SPI  0x6  /* EEPROM set Write Enable latch */
++#define EEPROM_WRDI_OPCODE_SPI  0x4  /* EEPROM reset Write Enable latch */
++#define EEPROM_RDSR_OPCODE_SPI  0x5  /* EEPROM read Status register */
++#define EEPROM_WRSR_OPCODE_SPI  0x1  /* EEPROM write Status register */
++
++/* EEPROM Size definitions */
++#define EEPROM_SIZE_16KB        0x1800
++#define EEPROM_SIZE_8KB         0x1400
++#define EEPROM_SIZE_4KB         0x1000
++#define EEPROM_SIZE_2KB         0x0C00
++#define EEPROM_SIZE_1KB         0x0800
++#define EEPROM_SIZE_512B        0x0400
++#define EEPROM_SIZE_128B        0x0000
++#define EEPROM_SIZE_MASK        0x1C00
++
++/* EEPROM Word Offsets */
++#define EEPROM_COMPAT              0x0003
++#define EEPROM_ID_LED_SETTINGS     0x0004
++#define EEPROM_SERDES_AMPLITUDE       0x0006 /* For SERDES output amplitude adjustment. */
++#define EEPROM_INIT_CONTROL1_REG   0x000A
++#define EEPROM_INIT_CONTROL2_REG   0x000F
++#define EEPROM_INIT_CONTROL3_PORT_B   0x0014
++#define EEPROM_INIT_CONTROL3_PORT_A   0x0024
++#define EEPROM_CFG                 0x0012
++#define EEPROM_FLASH_VERSION       0x0032
++#define EEPROM_CHECKSUM_REG        0x003F
++
++/* Word definitions for ID LED Settings */
++#define ID_LED_RESERVED_0000 0x0000
++#define ID_LED_RESERVED_FFFF 0xFFFF
++#define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
++                              (ID_LED_OFF1_OFF2 << 8) | \
++                              (ID_LED_DEF1_DEF2 << 4) | \
++                              (ID_LED_DEF1_DEF2))
++#define ID_LED_DEF1_DEF2     0x1
++#define ID_LED_DEF1_ON2      0x2
++#define ID_LED_DEF1_OFF2     0x3
++#define ID_LED_ON1_DEF2      0x4
++#define ID_LED_ON1_ON2       0x5
++#define ID_LED_ON1_OFF2      0x6
++#define ID_LED_OFF1_DEF2     0x7
++#define ID_LED_OFF1_ON2      0x8
++#define ID_LED_OFF1_OFF2     0x9
++
++#define IGP_ACTIVITY_LED_MASK   0xFFFFF0FF
++#define IGP_ACTIVITY_LED_ENABLE 0x0300
++#define IGP_LED3_MODE           0x07000000
++
++
++/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
++#define EEPROM_SERDES_AMPLITUDE_MASK  0x000F
++
++/* Mask bits for fields in Word 0x0a of the EEPROM */
++#define EEPROM_WORD0A_ILOS   0x0010
++#define EEPROM_WORD0A_SWDPIO 0x01E0
++#define EEPROM_WORD0A_LRST   0x0200
++#define EEPROM_WORD0A_FD     0x0400
++#define EEPROM_WORD0A_66MHZ  0x0800
++
++/* Mask bits for fields in Word 0x0f of the EEPROM */
++#define EEPROM_WORD0F_PAUSE_MASK 0x3000
++#define EEPROM_WORD0F_PAUSE      0x1000
++#define EEPROM_WORD0F_ASM_DIR    0x2000
++#define EEPROM_WORD0F_ANE        0x0800
++#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
++
++/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
++#define EEPROM_SUM 0xBABA
++
++/* EEPROM Map defines (WORD OFFSETS)*/
++#define EEPROM_NODE_ADDRESS_BYTE_0 0
++#define EEPROM_PBA_BYTE_1          8
++
++#define EEPROM_RESERVED_WORD          0xFFFF
++
++/* EEPROM Map Sizes (Byte Counts) */
++#define PBA_SIZE 4
++
++/* Collision related configuration parameters */
++#define E1000_COLLISION_THRESHOLD       16
++#define E1000_CT_SHIFT                  4
++#define E1000_COLLISION_DISTANCE        64
++#define E1000_FDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
++#define E1000_HDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
++#define E1000_COLD_SHIFT                12
++
++/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
++#define REQ_TX_DESCRIPTOR_MULTIPLE  8
++#define REQ_RX_DESCRIPTOR_MULTIPLE  8
++
++/* Default values for the transmit IPG register */
++#define DEFAULT_82542_TIPG_IPGT        10
++#define DEFAULT_82543_TIPG_IPGT_FIBER  9
++#define DEFAULT_82543_TIPG_IPGT_COPPER 8
++
++#define E1000_TIPG_IPGT_MASK  0x000003FF
++#define E1000_TIPG_IPGR1_MASK 0x000FFC00
++#define E1000_TIPG_IPGR2_MASK 0x3FF00000
++
++#define DEFAULT_82542_TIPG_IPGR1 2
++#define DEFAULT_82543_TIPG_IPGR1 8
++#define E1000_TIPG_IPGR1_SHIFT  10
++
++#define DEFAULT_82542_TIPG_IPGR2 10
++#define DEFAULT_82543_TIPG_IPGR2 6
++#define E1000_TIPG_IPGR2_SHIFT  20
++
++#define E1000_TXDMAC_DPP 0x00000001
++
++/* Adaptive IFS defines */
++#define TX_THRESHOLD_START     8
++#define TX_THRESHOLD_INCREMENT 10
++#define TX_THRESHOLD_DECREMENT 1
++#define TX_THRESHOLD_STOP      190
++#define TX_THRESHOLD_DISABLE   0
++#define TX_THRESHOLD_TIMER_MS  10000
++#define MIN_NUM_XMITS          1000
++#define IFS_MAX                80
++#define IFS_STEP               10
++#define IFS_MIN                40
++#define IFS_RATIO              4
++
++/* PBA constants */
++#define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
++#define E1000_PBA_22K 0x0016
++#define E1000_PBA_24K 0x0018
++#define E1000_PBA_30K 0x001E
++#define E1000_PBA_40K 0x0028
++#define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
++
++/* Flow Control Constants */
++#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
++#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
++#define FLOW_CONTROL_TYPE         0x8808
++
++/* The historical defaults for the flow control values are given below. */
++#define FC_DEFAULT_HI_THRESH        (0x8000)    /* 32KB */
++#define FC_DEFAULT_LO_THRESH        (0x4000)    /* 16KB */
++#define FC_DEFAULT_TX_TIMER         (0x100)     /* ~130 us */
++
++/* PCIX Config space */
++#define PCIX_COMMAND_REGISTER    0xE6
++#define PCIX_STATUS_REGISTER_LO  0xE8
++#define PCIX_STATUS_REGISTER_HI  0xEA
++
++#define PCIX_COMMAND_MMRBC_MASK      0x000C
++#define PCIX_COMMAND_MMRBC_SHIFT     0x2
++#define PCIX_STATUS_HI_MMRBC_MASK    0x0060
++#define PCIX_STATUS_HI_MMRBC_SHIFT   0x5
++#define PCIX_STATUS_HI_MMRBC_4K      0x3
++#define PCIX_STATUS_HI_MMRBC_2K      0x2
++
++
++/* Number of bits required to shift right the "pause" bits from the
++ * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
++ */
++#define PAUSE_SHIFT 5
++
++/* Number of bits required to shift left the "SWDPIO" bits from the
++ * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
++ */
++#define SWDPIO_SHIFT 17
++
++/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
++ * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
++ */
++#define SWDPIO__EXT_SHIFT 4
++
++/* Number of bits required to shift left the "ILOS" bit from the EEPROM
++ * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
++ */
++#define ILOS_SHIFT  3
++
++
++#define RECEIVE_BUFFER_ALIGN_SIZE  (256)
++
++/* Number of milliseconds we wait for auto-negotiation to complete */
++#define LINK_UP_TIMEOUT             500
++
++#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
++
++/* The carrier extension symbol, as received by the NIC. */
++#define CARRIER_EXTENSION   0x0F
++
++/* TBI_ACCEPT macro definition:
++ *
++ * This macro requires:
++ *      adapter = a pointer to struct e1000_hw 
++ *      status = the 8 bit status field of the RX descriptor with EOP set
++ *      error = the 8 bit error field of the RX descriptor with EOP set
++ *      length = the sum of all the length fields of the RX descriptors that
++ *               make up the current frame
++ *      last_byte = the last byte of the frame DMAed by the hardware
++ *      max_frame_length = the maximum frame length we want to accept.
++ *      min_frame_length = the minimum frame length we want to accept.
++ *
++ * This macro is a conditional that should be used in the interrupt 
++ * handler's Rx processing routine when RxErrors have been detected.
++ *
++ * Typical use:
++ *  ...
++ *  if (TBI_ACCEPT) {
++ *      accept_frame = TRUE;
++ *      e1000_tbi_adjust_stats(adapter, MacAddress);
++ *      frame_length--;
++ *  } else {
++ *      accept_frame = FALSE;
++ *  }
++ *  ...
++ */
++
++#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
++    ((adapter)->tbi_compatibility_on && \
++     (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
++     ((last_byte) == CARRIER_EXTENSION) && \
++     (((status) & E1000_RXD_STAT_VP) ? \
++          (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
++           ((length) <= ((adapter)->max_frame_size + 1))) : \
++          (((length) > (adapter)->min_frame_size) && \
++           ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
++
++
++/* Structures, enums, and macros for the PHY */
++
++/* Bit definitions for the Management Data IO (MDIO) and Management Data
++ * Clock (MDC) pins in the Device Control Register.
++ */
++#define E1000_CTRL_PHY_RESET_DIR  E1000_CTRL_SWDPIO0
++#define E1000_CTRL_PHY_RESET      E1000_CTRL_SWDPIN0
++#define E1000_CTRL_MDIO_DIR       E1000_CTRL_SWDPIO2
++#define E1000_CTRL_MDIO           E1000_CTRL_SWDPIN2
++#define E1000_CTRL_MDC_DIR        E1000_CTRL_SWDPIO3
++#define E1000_CTRL_MDC            E1000_CTRL_SWDPIN3
++#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
++#define E1000_CTRL_PHY_RESET4     E1000_CTRL_EXT_SDP4_DATA
++
++/* PHY 1000 MII Register/Bit Definitions */
++/* PHY Registers defined by IEEE */
++#define PHY_CTRL         0x00 /* Control Register */
++#define PHY_STATUS       0x01 /* Status Regiser */
++#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
++#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
++#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
++#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
++#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
++#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
++#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
++#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
++#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
++#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
++
++/* M88E1000 Specific Registers */
++#define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
++#define M88E1000_PHY_SPEC_STATUS   0x11  /* PHY Specific Status Register */
++#define M88E1000_INT_ENABLE        0x12  /* Interrupt Enable Register */
++#define M88E1000_INT_STATUS        0x13  /* Interrupt Status Register */
++#define M88E1000_EXT_PHY_SPEC_CTRL 0x14  /* Extended PHY Specific Control */
++#define M88E1000_RX_ERR_CNTR       0x15  /* Receive Error Counter */
++
++#define M88E1000_PHY_EXT_CTRL      0x1A  /* PHY extend control register */
++#define M88E1000_PHY_PAGE_SELECT   0x1D  /* Reg 29 for page number setting */
++#define M88E1000_PHY_GEN_CONTROL   0x1E  /* Its meaning depends on reg 29 */
++#define M88E1000_PHY_VCO_REG_BIT8  0x100 /* Bits 8 & 11 are adjusted for */
++#define M88E1000_PHY_VCO_REG_BIT11 0x800    /* improved BER performance */
++
++#define IGP01E1000_IEEE_REGS_PAGE  0x0000
++#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
++#define IGP01E1000_IEEE_FORCE_GIGA      0x0140
++
++/* IGP01E1000 Specific Registers */
++#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
++#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
++#define IGP01E1000_PHY_PORT_CTRL   0x12 /* PHY Specific Control Register */
++#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
++#define IGP01E1000_GMII_FIFO       0x14 /* GMII FIFO Register */
++#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
++#define IGP01E1000_PHY_PAGE_SELECT     0x1F /* PHY Page Select Core Register */
++
++/* IGP01E1000 AGC Registers - stores the cable length values*/
++#define IGP01E1000_PHY_AGC_A        0x1172
++#define IGP01E1000_PHY_AGC_B        0x1272
++#define IGP01E1000_PHY_AGC_C        0x1472
++#define IGP01E1000_PHY_AGC_D        0x1872
++
++/* IGP01E1000 DSP Reset Register */
++#define IGP01E1000_PHY_DSP_RESET   0x1F33
++#define IGP01E1000_PHY_DSP_SET     0x1F71
++#define IGP01E1000_PHY_DSP_FFE     0x1F35
++
++#define IGP01E1000_PHY_CHANNEL_NUM    4
++#define IGP01E1000_PHY_AGC_PARAM_A    0x1171
++#define IGP01E1000_PHY_AGC_PARAM_B    0x1271
++#define IGP01E1000_PHY_AGC_PARAM_C    0x1471
++#define IGP01E1000_PHY_AGC_PARAM_D    0x1871
++
++#define IGP01E1000_PHY_EDAC_MU_INDEX        0xC000
++#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
++
++#define IGP01E1000_PHY_ANALOG_TX_STATE      0x2890
++#define IGP01E1000_PHY_ANALOG_CLASS_A       0x2000
++#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE  0x0004
++#define IGP01E1000_PHY_DSP_FFE_CM_CP        0x0069
++
++#define IGP01E1000_PHY_DSP_FFE_DEFAULT      0x002A
++/* IGP01E1000 PCS Initialization register - stores the polarity status when
++ * speed = 1000 Mbps. */
++#define IGP01E1000_PHY_PCS_INIT_REG  0x00B4
++#define IGP01E1000_PHY_PCS_CTRL_REG  0x00B5
++
++#define IGP01E1000_ANALOG_REGS_PAGE  0x20C0
++  
++#define MAX_PHY_REG_ADDRESS 0x1F        /* 5 bit address bus (0-0x1F) */
++#define MAX_PHY_MULTI_PAGE_REG  0xF     /*Registers that are equal on all pages*/
++/* PHY Control Register */
++#define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
++#define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
++#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
++#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
++#define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
++#define MII_CR_POWER_DOWN       0x0800  /* Power down */
++#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
++#define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
++#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
++#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
++
++/* PHY Status Register */
++#define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
++#define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
++#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
++#define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
++#define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
++#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
++#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
++#define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
++#define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
++#define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
++#define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
++#define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
++#define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
++#define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
++#define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
++
++/* Autoneg Advertisement Register */
++#define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
++#define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
++#define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
++#define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
++#define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
++#define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
++#define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
++#define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
++#define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
++#define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
++
++/* Link Partner Ability Register (Base Page) */
++#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
++#define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
++#define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
++#define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
++#define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
++#define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
++#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
++#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
++#define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
++#define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
++#define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
++
++/* Autoneg Expansion Register */
++#define NWAY_ER_LP_NWAY_CAPS      0x0001 /* LP has Auto Neg Capability */
++#define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
++#define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
++#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
++#define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
++
++/* Next Page TX Register */
++#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
++#define NPTX_TOGGLE         0x0800 /* Toggles between exchanges
++                                    * of different NP
++                                    */
++#define NPTX_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
++                                    * 0 = cannot comply with msg
++                                    */
++#define NPTX_MSG_PAGE       0x2000 /* formatted(1)/unformatted(0) pg */
++#define NPTX_NEXT_PAGE      0x8000 /* 1 = addition NP will follow 
++                                    * 0 = sending last NP
++                                    */
++
++/* Link Partner Next Page Register */
++#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
++#define LP_RNPR_TOGGLE         0x0800 /* Toggles between exchanges
++                                       * of different NP
++                                       */
++#define LP_RNPR_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg 
++                                       * 0 = cannot comply with msg
++                                       */
++#define LP_RNPR_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
++#define LP_RNPR_ACKNOWLDGE     0x4000  /* 1 = ACK / 0 = NO ACK */
++#define LP_RNPR_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
++                                        * 0 = sending last NP 
++                                        */
++
++/* 1000BASE-T Control Register */
++#define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
++#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
++#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
++#define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
++                                        /* 0=DTE device */
++#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
++                                        /* 0=Configure PHY as Slave */
++#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
++                                        /* 0=Automatic Master/Slave config */
++#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
++#define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
++#define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
++#define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
++#define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
++
++/* 1000BASE-T Status Register */
++#define SR_1000T_IDLE_ERROR_CNT   0x00FF /* Num idle errors since last read */
++#define SR_1000T_ASYM_PAUSE_DIR   0x0100 /* LP asymmetric pause direction bit */
++#define SR_1000T_LP_HD_CAPS       0x0400 /* LP is 1000T HD capable */
++#define SR_1000T_LP_FD_CAPS       0x0800 /* LP is 1000T FD capable */
++#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
++#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
++#define SR_1000T_MS_CONFIG_RES    0x4000 /* 1=Local TX is Master, 0=Slave */
++#define SR_1000T_MS_CONFIG_FAULT  0x8000 /* Master/Slave config fault */
++#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
++#define SR_1000T_LOCAL_RX_STATUS_SHIFT  13
++#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
++#define FFE_IDLE_ERR_COUNT_TIMEOUT_20            20
++#define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
++
++/* Extended Status Register */
++#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
++#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
++#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
++#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
++
++#define PHY_TX_POLARITY_MASK   0x0100 /* register 10h bit 8 (polarity bit) */
++#define PHY_TX_NORMAL_POLARITY 0      /* register 10h bit 8 (normal polarity) */
++
++#define AUTO_POLARITY_DISABLE  0x0010 /* register 11h bit 4 */
++                                      /* (0=enable, 1=disable) */
++
++/* M88E1000 PHY Specific Control Register */
++#define M88E1000_PSCR_JABBER_DISABLE    0x0001 /* 1=Jabber Function disabled */
++#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
++#define M88E1000_PSCR_SQE_TEST          0x0004 /* 1=SQE Test enabled */
++#define M88E1000_PSCR_CLK125_DISABLE    0x0010 /* 1=CLK125 low, 
++                                                * 0=CLK125 toggling
++                                                */
++#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000  /* MDI Crossover Mode bits 6:5 */
++                                               /* Manual MDI configuration */
++#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020  /* Manual MDIX configuration */
++#define M88E1000_PSCR_AUTO_X_1000T     0x0040  /* 1000BASE-T: Auto crossover,
++                                                *  100BASE-TX/10BASE-T: 
++                                                *  MDI Mode
++                                                */
++#define M88E1000_PSCR_AUTO_X_MODE      0x0060  /* Auto crossover enabled 
++                                                * all speeds. 
++                                                */
++#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080 
++                                        /* 1=Enable Extended 10BASE-T distance
++                                         * (Lower 10BASE-T RX Threshold)
++                                         * 0=Normal 10BASE-T RX Threshold */
++#define M88E1000_PSCR_MII_5BIT_ENABLE      0x0100
++                                        /* 1=5-Bit interface in 100BASE-TX
++                                         * 0=MII interface in 100BASE-TX */
++#define M88E1000_PSCR_SCRAMBLER_DISABLE    0x0200 /* 1=Scrambler disable */
++#define M88E1000_PSCR_FORCE_LINK_GOOD      0x0400 /* 1=Force link good */
++#define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800 /* 1=Assert CRS on Transmit */
++
++#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT    1
++#define M88E1000_PSCR_AUTO_X_MODE_SHIFT          5
++#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
++
++/* M88E1000 PHY Specific Status Register */
++#define M88E1000_PSSR_JABBER             0x0001 /* 1=Jabber */
++#define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
++#define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
++#define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
++#define M88E1000_PSSR_CABLE_LENGTH       0x0380 /* 0=<50M;1=50-80M;2=80-110M;
++                                            * 3=110-140M;4=>140M */
++#define M88E1000_PSSR_LINK               0x0400 /* 1=Link up, 0=Link down */
++#define M88E1000_PSSR_SPD_DPLX_RESOLVED  0x0800 /* 1=Speed & Duplex resolved */
++#define M88E1000_PSSR_PAGE_RCVD          0x1000 /* 1=Page received */
++#define M88E1000_PSSR_DPLX               0x2000 /* 1=Duplex 0=Half Duplex */
++#define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
++#define M88E1000_PSSR_10MBS              0x0000 /* 00=10Mbs */
++#define M88E1000_PSSR_100MBS             0x4000 /* 01=100Mbs */
++#define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
++
++#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
++#define M88E1000_PSSR_DOWNSHIFT_SHIFT    5
++#define M88E1000_PSSR_MDIX_SHIFT         6
++#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
++
++/* M88E1000 Extended PHY Specific Control Register */
++#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
++#define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000 /* 1=Lost lock detect enabled.
++                                              * Will assert lost lock and bring
++                                              * link down if idle not seen
++                                              * within 1ms in 1000BASE-T 
++                                              */
++/* Number of times we will attempt to autonegotiate before downshifting if we
++ * are the master */
++#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
++#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000    
++#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X   0x0400
++#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X   0x0800
++#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X   0x0C00
++/* Number of times we will attempt to autonegotiate before downshifting if we
++ * are the slave */
++#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
++#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS   0x0000
++#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
++#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X    0x0200
++#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X    0x0300
++#define M88E1000_EPSCR_TX_CLK_2_5     0x0060 /* 2.5 MHz TX_CLK */
++#define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
++#define M88E1000_EPSCR_TX_CLK_0       0x0000 /* NO  TX_CLK */
++
++/* IGP01E1000 Specific Port Config Register - R/W */
++#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT  0x0010
++#define IGP01E1000_PSCFR_PRE_EN                0x0020
++#define IGP01E1000_PSCFR_SMART_SPEED           0x0080
++#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK    0x0100
++#define IGP01E1000_PSCFR_DISABLE_JABBER        0x0400
++#define IGP01E1000_PSCFR_DISABLE_TRANSMIT      0x2000
++
++/* IGP01E1000 Specific Port Status Register - R/O */
++#define IGP01E1000_PSSR_AUTONEG_FAILED         0x0001 /* RO LH SC */
++#define IGP01E1000_PSSR_POLARITY_REVERSED      0x0002
++#define IGP01E1000_PSSR_CABLE_LENGTH           0x007C
++#define IGP01E1000_PSSR_FULL_DUPLEX            0x0200
++#define IGP01E1000_PSSR_LINK_UP                0x0400
++#define IGP01E1000_PSSR_MDIX                   0x0800
++#define IGP01E1000_PSSR_SPEED_MASK             0xC000 /* speed bits mask */
++#define IGP01E1000_PSSR_SPEED_10MBPS           0x4000
++#define IGP01E1000_PSSR_SPEED_100MBPS          0x8000
++#define IGP01E1000_PSSR_SPEED_1000MBPS         0xC000
++#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT     0x0002 /* shift right 2 */
++#define IGP01E1000_PSSR_MDIX_SHIFT             0x000B /* shift right 11 */
++
++/* IGP01E1000 Specific Port Control Register - R/W */
++#define IGP01E1000_PSCR_TP_LOOPBACK            0x0001
++#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR      0x0200
++#define IGP01E1000_PSCR_TEN_CRS_SELECT         0x0400
++#define IGP01E1000_PSCR_FLIP_CHIP              0x0800
++#define IGP01E1000_PSCR_AUTO_MDIX              0x1000
++#define IGP01E1000_PSCR_FORCE_MDI_MDIX         0x2000 /* 0-MDI, 1-MDIX */
++
++/* IGP01E1000 Specific Port Link Health Register */
++#define IGP01E1000_PLHR_SS_DOWNGRADE           0x8000
++#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR    0x4000
++#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK       0x0800 /* LH */
++#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW   0x0400 /* LH */
++#define IGP01E1000_PLHR_DATA_ERR_1             0x0200 /* LH */
++#define IGP01E1000_PLHR_DATA_ERR_0             0x0100
++#define IGP01E1000_PLHR_AUTONEG_FAULT          0x0010
++#define IGP01E1000_PLHR_AUTONEG_ACTIVE         0x0008
++#define IGP01E1000_PLHR_VALID_CHANNEL_D        0x0004
++#define IGP01E1000_PLHR_VALID_CHANNEL_C        0x0002
++#define IGP01E1000_PLHR_VALID_CHANNEL_B        0x0001
++#define IGP01E1000_PLHR_VALID_CHANNEL_A        0x0000
++
++/* IGP01E1000 Channel Quality Register */
++#define IGP01E1000_MSE_CHANNEL_D        0x000F
++#define IGP01E1000_MSE_CHANNEL_C        0x00F0
++#define IGP01E1000_MSE_CHANNEL_B        0x0F00
++#define IGP01E1000_MSE_CHANNEL_A        0xF000
++
++/* IGP01E1000 DSP reset macros */
++#define DSP_RESET_ENABLE     0x0
++#define DSP_RESET_DISABLE    0x2
++#define E1000_MAX_DSP_RESETS 10
++
++/* IGP01E1000 AGC Registers */
++
++#define IGP01E1000_AGC_LENGTH_SHIFT 7         /* Coarse - 13:11, Fine - 10:7 */
++
++/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
++#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
++
++/* The precision of the length is +/- 10 meters */
++#define IGP01E1000_AGC_RANGE    10
++
++/* IGP01E1000 PCS Initialization register */
++/* bits 3:6 in the PCS registers stores the channels polarity */
++#define IGP01E1000_PHY_POLARITY_MASK    0x0078
++
++/* IGP01E1000 GMII FIFO Register */
++#define IGP01E1000_GMII_FLEX_SPD               0x10 /* Enable flexible speed
++                                                     * on Link-Up */
++#define IGP01E1000_GMII_SPD                    0x20 /* Enable SPD */
++
++/* IGP01E1000 Analog Register */
++#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS         0x20D1
++#define IGP01E1000_ANALOG_FUSE_STATUS               0x20D0
++#define IGP01E1000_ANALOG_FUSE_CONTROL              0x20DC
++#define IGP01E1000_ANALOG_FUSE_BYPASS               0x20DE
++
++#define IGP01E1000_ANALOG_FUSE_POLY_MASK            0xF000
++#define IGP01E1000_ANALOG_FUSE_FINE_MASK            0x0F80
++#define IGP01E1000_ANALOG_FUSE_COARSE_MASK          0x0070
++#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED        0x0100
++#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL    0x0002
++
++#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH        0x0040
++#define IGP01E1000_ANALOG_FUSE_COARSE_10            0x0010
++#define IGP01E1000_ANALOG_FUSE_FINE_1               0x0080
++#define IGP01E1000_ANALOG_FUSE_FINE_10              0x0500
++
++/* Bit definitions for valid PHY IDs. */
++#define M88E1000_E_PHY_ID  0x01410C50
++#define M88E1000_I_PHY_ID  0x01410C30
++#define M88E1011_I_PHY_ID  0x01410C20
++#define IGP01E1000_I_PHY_ID  0x02A80380
++#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
++#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
++#define M88E1011_I_REV_4   0x04
++
++/* Miscellaneous PHY bit definitions. */
++#define PHY_PREAMBLE        0xFFFFFFFF
++#define PHY_SOF             0x01
++#define PHY_OP_READ         0x02
++#define PHY_OP_WRITE        0x01
++#define PHY_TURNAROUND      0x02
++#define PHY_PREAMBLE_SIZE   32
++#define MII_CR_SPEED_1000   0x0040
++#define MII_CR_SPEED_100    0x2000
++#define MII_CR_SPEED_10     0x0000
++#define E1000_PHY_ADDRESS   0x01
++#define PHY_AUTO_NEG_TIME   45  /* 4.5 Seconds */
++#define PHY_FORCE_TIME      20  /* 2.0 Seconds */
++#define PHY_REVISION_MASK   0xFFFFFFF0
++#define DEVICE_SPEED_MASK   0x00000300  /* Device Ctrl Reg Speed Mask */
++#define REG4_SPEED_MASK     0x01E0
++#define REG9_SPEED_MASK     0x0300
++#define ADVERTISE_10_HALF   0x0001
++#define ADVERTISE_10_FULL   0x0002
++#define ADVERTISE_100_HALF  0x0004
++#define ADVERTISE_100_FULL  0x0008
++#define ADVERTISE_1000_HALF 0x0010
++#define ADVERTISE_1000_FULL 0x0020
++#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F  /* Everything but 1000-Half */
++#define AUTONEG_ADVERTISE_10_100_ALL    0x000F	/* All 10/100 speeds*/
++#define AUTONEG_ADVERTISE_10_ALL        0x0003	/* 10Mbps Full & Half speeds*/
++
++#endif /* _E1000_HW_H_ */
+diff -Naur grub-0.97.orig/netboot/eepro.c grub-0.97/netboot/eepro.c
+--- grub-0.97.orig/netboot/eepro.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/eepro.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,586 +0,0 @@
+-/**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-Intel EEPRO/10 NIC driver for Etherboot
+-Adapted from Linux eepro.c from kernel 2.2.17
+-
+-This board accepts a 32 pin EEPROM (29C256), however a test with a
+-27C010 shows that this EPROM also works in the socket, but it's not clear
+-how repeatably. The two top address pins appear to be held low, thus
+-the bottom 32kB of the 27C010 is visible in the CPU's address space.
+-To be sure you could put 4 copies of the code in the 27C010, then
+-it doesn't matter whether the extra lines are held low or high, just
+-hopefully not floating as CMOS chips don't like floating inputs.
+-
+-Be careful with seating the EPROM as the socket on my board actually
+-has 34 pins, the top row of 2 are not used.
+-***************************************************************************/
+-
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+-/* to get some global routines like printf */
+-#include "etherboot.h"
+-/* to get the interface to the body of the program */
+-#include "nic.h"
+-/* to get our own prototype */
+-#include "cards.h"
+-/* we use timer2 for microsecond waits */
+-#include "timer.h"
+-
+-#undef	DEBUG		/* only after include files */
+-
+-/* Different 82595 chips */
+-#define LAN595		0
+-#define LAN595TX	1
+-#define LAN595FX	2
+-#define LAN595FX_10ISA	3
+-
+-#define	SLOW_DOWN	inb(0x80);
+-
+-/* The station (ethernet) address prefix, used for IDing the board. */
+-#define SA_ADDR0 0x00	/* Etherexpress Pro/10 */
+-#define SA_ADDR1 0xaa
+-#define SA_ADDR2 0x00
+-
+-#define GetBit(x,y) ((x & (1<<y))>>y)
+-
+-/* EEPROM Word 0: */
+-#define ee_PnP       0  /* Plug 'n Play enable bit */
+-#define ee_Word1     1  /* Word 1? */
+-#define ee_BusWidth  2  /* 8/16 bit */
+-#define ee_FlashAddr 3  /* Flash Address */
+-#define ee_FlashMask 0x7   /* Mask */
+-#define ee_AutoIO    6  /* */
+-#define ee_reserved0 7  /* =0! */
+-#define ee_Flash     8  /* Flash there? */
+-#define ee_AutoNeg   9  /* Auto Negotiation enabled? */
+-#define ee_IO0       10 /* IO Address LSB */
+-#define ee_IO0Mask   0x /*...*/
+-#define ee_IO1       15 /* IO MSB */
+-
+-/* EEPROM Word 1: */
+-#define ee_IntSel    0   /* Interrupt */
+-#define ee_IntMask   0x7
+-#define ee_LI        3   /* Link Integrity 0= enabled */
+-#define ee_PC        4   /* Polarity Correction 0= enabled */
+-#define ee_TPE_AUI   5   /* PortSelection 1=TPE */
+-#define ee_Jabber    6   /* Jabber prevention 0= enabled */
+-#define ee_AutoPort  7   /* Auto Port Selection 1= Disabled */
+-#define ee_SMOUT     8   /* SMout Pin Control 0= Input */
+-#define ee_PROM      9   /* Flash EPROM / PROM 0=Flash */
+-#define ee_reserved1 10  /* .. 12 =0! */
+-#define ee_AltReady  13  /* Alternate Ready, 0=normal */
+-#define ee_reserved2 14  /* =0! */
+-#define ee_Duplex    15
+-
+-/* Word2,3,4: */
+-#define ee_IA5       0 /*bit start for individual Addr Byte 5 */
+-#define ee_IA4       8 /*bit start for individual Addr Byte 5 */
+-#define ee_IA3       0 /*bit start for individual Addr Byte 5 */
+-#define ee_IA2       8 /*bit start for individual Addr Byte 5 */
+-#define ee_IA1       0 /*bit start for individual Addr Byte 5 */
+-#define ee_IA0       8 /*bit start for individual Addr Byte 5 */
+-
+-/* Word 5: */
+-#define ee_BNC_TPE   0 /* 0=TPE */
+-#define ee_BootType  1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */
+-#define ee_BootTypeMask 0x3 
+-#define ee_NumConn   3  /* Number of Connections 0= One or Two */
+-#define ee_FlashSock 4  /* Presence of Flash Socket 0= Present */
+-#define ee_PortTPE   5
+-#define ee_PortBNC   6
+-#define ee_PortAUI   7
+-#define ee_PowerMgt  10 /* 0= disabled */
+-#define ee_CP        13 /* Concurrent Processing */
+-#define ee_CPMask    0x7
+-
+-/* Word 6: */
+-#define ee_Stepping  0 /* Stepping info */
+-#define ee_StepMask  0x0F
+-#define ee_BoardID   4 /* Manucaturer Board ID, reserved */
+-#define ee_BoardMask 0x0FFF
+-
+-/* Word 7: */
+-#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping  = 0x1EB8 for Pro/10+ */
+-#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */
+-
+-/*..*/
+-#define ee_SIZE 0x40 /* total EEprom Size */
+-#define ee_Checksum 0xBABA /* initial and final value for adding checksum */
+-
+-
+-/* Card identification via EEprom:   */
+-#define ee_addr_vendor 0x10  /* Word offset for EISA Vendor ID */
+-#define ee_addr_id 0x11      /* Word offset for Card ID */
+-#define ee_addr_SN 0x12      /* Serial Number */
+-#define ee_addr_CRC_8 0x14   /* CRC over last thee Bytes */
+-
+-
+-#define ee_vendor_intel0 0x25  /* Vendor ID Intel */
+-#define ee_vendor_intel1 0xD4
+-#define ee_id_eepro10p0 0x10   /* ID for eepro/10+ */
+-#define ee_id_eepro10p1 0x31
+-
+-/* now this section could be used by both boards: the oldies and the ee10:
+- * ee10 uses tx buffer before of rx buffer and the oldies the inverse.
+- * (aris)
+- */
+-#define	RAM_SIZE	0x8000
+-
+-#define	RCV_HEADER	8
+-#define RCV_DEFAULT_RAM	0x6000
+-#define RCV_RAM 	rcv_ram
+-
+-static unsigned rcv_ram = RCV_DEFAULT_RAM;
+-
+-#define XMT_HEADER	8
+-#define XMT_RAM		(RAM_SIZE - RCV_RAM)
+-
+-#define XMT_START	((rcv_start + RCV_RAM) % RAM_SIZE)
+-
+-#define RCV_LOWER_LIMIT	(rcv_start >> 8)
+-#define RCV_UPPER_LIMIT	(((rcv_start + RCV_RAM) - 2) >> 8)
+-#define XMT_LOWER_LIMIT	(XMT_START >> 8)
+-#define XMT_UPPER_LIMIT	(((XMT_START + XMT_RAM) - 2) >> 8)
+-
+-#define RCV_START_PRO	0x00
+-#define RCV_START_10	XMT_RAM
+-					/* by default the old driver */
+-static unsigned rcv_start = RCV_START_PRO;
+-
+-#define	RCV_DONE	0x0008
+-#define	RX_OK		0x2000
+-#define	RX_ERROR	0x0d81
+-
+-#define	TX_DONE_BIT	0x0080
+-#define	CHAIN_BIT	0x8000
+-#define	XMT_STATUS	0x02
+-#define	XMT_CHAIN	0x04
+-#define	XMT_COUNT	0x06
+-
+-#define	BANK0_SELECT	0x00		
+-#define	BANK1_SELECT	0x40		
+-#define	BANK2_SELECT	0x80		
+-
+-/* Bank 0 registers */
+-#define	COMMAND_REG	0x00	/* Register 0 */
+-#define	MC_SETUP	0x03
+-#define	XMT_CMD		0x04
+-#define	DIAGNOSE_CMD	0x07
+-#define	RCV_ENABLE_CMD	0x08
+-#define	RCV_DISABLE_CMD	0x0a
+-#define	STOP_RCV_CMD	0x0b
+-#define	RESET_CMD	0x0e
+-#define	POWER_DOWN_CMD	0x18
+-#define	RESUME_XMT_CMD	0x1c
+-#define	SEL_RESET_CMD	0x1e
+-#define	STATUS_REG	0x01	/* Register 1 */
+-#define	RX_INT		0x02
+-#define	TX_INT		0x04
+-#define	EXEC_STATUS	0x30
+-#define	ID_REG		0x02	/* Register 2	*/
+-#define	R_ROBIN_BITS	0xc0	/* round robin counter */
+-#define	ID_REG_MASK	0x2c
+-#define	ID_REG_SIG	0x24
+-#define	AUTO_ENABLE	0x10
+-#define	INT_MASK_REG	0x03	/* Register 3	*/
+-#define	RX_STOP_MASK	0x01
+-#define	RX_MASK		0x02
+-#define	TX_MASK		0x04
+-#define	EXEC_MASK	0x08
+-#define	ALL_MASK	0x0f
+-#define	IO_32_BIT	0x10
+-#define	RCV_BAR		0x04	/* The following are word (16-bit) registers */
+-#define	RCV_STOP	0x06
+-
+-#define	XMT_BAR_PRO	0x0a
+-#define	XMT_BAR_10	0x0b
+-static unsigned xmt_bar = XMT_BAR_PRO;
+-
+-#define	HOST_ADDRESS_REG	0x0c
+-#define	IO_PORT		0x0e
+-#define	IO_PORT_32_BIT	0x0c
+-
+-/* Bank 1 registers */
+-#define	REG1	0x01
+-#define	WORD_WIDTH	0x02
+-#define	INT_ENABLE	0x80
+-#define INT_NO_REG	0x02
+-#define	RCV_LOWER_LIMIT_REG	0x08
+-#define	RCV_UPPER_LIMIT_REG	0x09
+-
+-#define	XMT_LOWER_LIMIT_REG_PRO	0x0a
+-#define	XMT_UPPER_LIMIT_REG_PRO	0x0b
+-#define	XMT_LOWER_LIMIT_REG_10	0x0b
+-#define	XMT_UPPER_LIMIT_REG_10	0x0a
+-static unsigned xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO;
+-static unsigned xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO;
+-
+-/* Bank 2 registers */
+-#define	XMT_Chain_Int	0x20	/* Interrupt at the end of the transmit chain */
+-#define	XMT_Chain_ErrStop	0x40 /* Interrupt at the end of the chain even if there are errors */
+-#define	RCV_Discard_BadFrame	0x80 /* Throw bad frames away, and continue to receive others */
+-#define	REG2		0x02
+-#define	PRMSC_Mode	0x01
+-#define	Multi_IA	0x20
+-#define	REG3		0x03
+-#define	TPE_BIT		0x04
+-#define	BNC_BIT		0x20
+-#define	REG13		0x0d
+-#define	FDX		0x00
+-#define	A_N_ENABLE	0x02
+-	
+-#define	I_ADD_REG0	0x04
+-#define	I_ADD_REG1	0x05
+-#define	I_ADD_REG2	0x06
+-#define	I_ADD_REG3	0x07
+-#define	I_ADD_REG4	0x08
+-#define	I_ADD_REG5	0x09
+-
+-#define EEPROM_REG_PRO	0x0a
+-#define EEPROM_REG_10	0x0b
+-static unsigned eeprom_reg = EEPROM_REG_PRO;
+-
+-#define EESK 0x01
+-#define EECS 0x02
+-#define EEDI 0x04
+-#define EEDO 0x08
+-
+-/* The horrible routine to read a word from the serial EEPROM. */
+-/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
+-
+-/* The delay between EEPROM clock transitions. */
+-#define eeprom_delay() { udelay(40); }
+-#define EE_READ_CMD (6 << 6)
+-
+-/* do a full reset */
+-#define eepro_full_reset(ioaddr)	outb(RESET_CMD, ioaddr); udelay(40);
+-
+-/* do a nice reset */
+-#define eepro_sel_reset(ioaddr) 	{ \
+-					outb(SEL_RESET_CMD, ioaddr); \
+-					SLOW_DOWN; \
+-					SLOW_DOWN; \
+-					}
+-
+-/* clear all interrupts */
+-#define	eepro_clear_int(ioaddr)	outb(ALL_MASK, ioaddr + STATUS_REG)
+-
+-/* enable rx */
+-#define	eepro_en_rx(ioaddr)	outb(RCV_ENABLE_CMD, ioaddr)
+-
+-/* disable rx */
+-#define	eepro_dis_rx(ioaddr)	outb(RCV_DISABLE_CMD, ioaddr)
+-
+-/* switch bank */
+-#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr)
+-#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr)
+-#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr)
+-
+-static unsigned int	rx_start, tx_start;
+-static int		tx_last;
+-static unsigned		tx_end;
+-static int		eepro = 0;
+-static unsigned short	ioaddr = 0;
+-static unsigned int	mem_start, mem_end = RCV_DEFAULT_RAM / 1024;
+-
+-#define	udelay(n)	waiton_timer2(((n)*TICKS_PER_MS)/1000)
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void eepro_reset(struct nic *nic)
+-{
+-	int		temp_reg, i;
+-
+-	/* put the card in its initial state */
+-	eepro_sw2bank2(ioaddr);	/* be careful, bank2 now */
+-	temp_reg = inb(ioaddr + eeprom_reg);
+-#ifdef	DEBUG
+-	printf("Stepping %d\n", temp_reg >> 5);
+-#endif
+-	if (temp_reg & 0x10)	/* check the TurnOff Enable bit */
+-		outb(temp_reg & 0xEF, ioaddr + eeprom_reg);
+-	for (i = 0; i < ETH_ALEN; i++)	/* fill the MAC address */
+-		outb(nic->node_addr[i], ioaddr + I_ADD_REG0 + i);
+-	temp_reg = inb(ioaddr + REG1);
+-	/* setup Transmit Chaining and discard bad RCV frames */
+-	outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop
+-		| RCV_Discard_BadFrame, ioaddr + REG1);
+-	temp_reg = inb(ioaddr + REG2);		/* match broadcast */
+-	outb(temp_reg | 0x14, ioaddr + REG2);
+-	temp_reg = inb(ioaddr + REG3);
+-	outb(temp_reg & 0x3F, ioaddr + REG3);	/* clear test mode */
+-	/* set the receiving mode */
+-	eepro_sw2bank1(ioaddr);	/* be careful, bank1 now */
+-	/* initialise the RCV and XMT upper and lower limits */
+-	outb(RCV_LOWER_LIMIT, ioaddr + RCV_LOWER_LIMIT_REG);
+-	outb(RCV_UPPER_LIMIT, ioaddr + RCV_UPPER_LIMIT_REG);
+-	outb(XMT_LOWER_LIMIT, ioaddr + xmt_lower_limit_reg);
+-	outb(XMT_UPPER_LIMIT, ioaddr + xmt_upper_limit_reg);
+-	eepro_sw2bank0(ioaddr);	/* Switch back to bank 0 */
+-	eepro_clear_int(ioaddr);
+-	/* Initialise RCV */
+-	outw(rx_start = (RCV_LOWER_LIMIT << 8), ioaddr + RCV_BAR);
+-	outw(((RCV_UPPER_LIMIT << 8) | 0xFE), ioaddr + RCV_STOP);
+-	/* Intialise XMT */
+-	outw((XMT_LOWER_LIMIT << 8), ioaddr + xmt_bar);
+-	eepro_sel_reset(ioaddr);
+-	tx_start = tx_end = (XMT_LOWER_LIMIT << 8);
+-	tx_last = 0;
+-	eepro_en_rx(ioaddr);
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int eepro_poll(struct nic *nic)
+-{
+-	int		i;
+-	unsigned int	rcv_car = rx_start;
+-	unsigned int	rcv_event, rcv_status, rcv_next_frame, rcv_size;
+-
+-	/* return true if there's an ethernet packet ready to read */
+-	/* nic->packet should contain data on return */
+-	/* nic->packetlen should contain length of data */
+-#if	0
+-	if ((inb(ioaddr + STATUS_REG) & 0x40) == 0)
+-		return (0);
+-	outb(0x40, ioaddr + STATUS_REG);
+-#endif
+-	outw(rcv_car, ioaddr + HOST_ADDRESS_REG);
+-	rcv_event = inw(ioaddr + IO_PORT);
+-	if (rcv_event != RCV_DONE)
+-		return (0);
+-	rcv_status = inw(ioaddr + IO_PORT);
+-	rcv_next_frame = inw(ioaddr + IO_PORT);
+-	rcv_size = inw(ioaddr + IO_PORT);
+-#if	0
+-	printf("%hX %hX %d %hhX\n", rcv_status, rcv_next_frame, rcv_size,
+-		inb(ioaddr + STATUS_REG));
+-#endif
+-	if ((rcv_status & (RX_OK|RX_ERROR)) != RX_OK) {
+-		printf("Receive error %hX\n", rcv_status);
+-		return (0);
+-	}
+-	rcv_size &= 0x3FFF;
+-	insw(ioaddr + IO_PORT, nic->packet, ((rcv_size + 3) >> 1));
+-#if	0
+-	for (i = 0; i < 48; i++) {
+-		printf("%hhX", nic->packet[i]);
+-		putchar(i % 16 == 15 ? '\n' : ' ');
+-	}
+-#endif
+-	nic->packetlen = rcv_size;
+-	rcv_car = rx_start + RCV_HEADER + rcv_size;
+-	rx_start = rcv_next_frame;
+-	if (rcv_car == 0)
+-		rcv_car = ((RCV_UPPER_LIMIT << 8) | 0xff);
+-	outw(rcv_car - 1, ioaddr + RCV_STOP);
+-	return (1);
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void eepro_transmit(
+-	struct nic *nic,
+-	const char *d,			/* Destination */
+-	unsigned int t,			/* Type */
+-	unsigned int s,			/* size */
+-	const char *p)			/* Packet */
+-{
+-	unsigned int	status, tx_available, last, end, length;
+-	unsigned short	type;
+-	int		boguscount = 20;
+-
+-	length = s + ETH_HLEN;
+-	if (tx_end > tx_start)
+-		tx_available = XMT_RAM - (tx_end - tx_start);
+-	else if (tx_end < tx_start)
+-		tx_available = tx_start - tx_end;
+-	else
+-		tx_available = XMT_RAM;
+-	last = tx_end;
+-	end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
+-	if (end >= (XMT_UPPER_LIMIT << 8)) {
+-		last = (XMT_LOWER_LIMIT << 8);
+-		end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
+-	}
+-	outw(last, ioaddr + HOST_ADDRESS_REG);
+-	outw(XMT_CMD, ioaddr + IO_PORT);
+-	outw(0, ioaddr + IO_PORT);
+-	outw(end, ioaddr + IO_PORT);
+-	outw(length, ioaddr + IO_PORT);
+-	outsw(ioaddr + IO_PORT, d, ETH_ALEN / 2);
+-	outsw(ioaddr + IO_PORT, nic->node_addr, ETH_ALEN / 2);
+-	type = htons(t);
+-	outsw(ioaddr + IO_PORT, &type, sizeof(type) / 2);
+-	outsw(ioaddr + IO_PORT, p, (s + 3) >> 1);
+-	/* A dummy read to flush the DRAM write pipeline */
+-	status = inw(ioaddr + IO_PORT);
+-	outw(last, ioaddr + xmt_bar);
+-	outb(XMT_CMD, ioaddr);
+-	tx_start = last;
+-	tx_last = last;
+-	tx_end = end;
+-#if	0
+-	printf("%d %d\n", tx_start, tx_end);
+-#endif
+-	while (boguscount > 0) {
+-		if (((status = inw(ioaddr + IO_PORT)) & TX_DONE_BIT) == 0) {
+-			udelay(40);
+-			boguscount--;
+-			continue;
+-		}
+-#if	DEBUG
+-		if ((status & 0x2000) == 0)
+-			printf("Transmit status %hX\n", status);
+-#endif
+-	}
+-}
+-
+-/**************************************************************************
+-DISABLE - Turn off ethernet interface
+-***************************************************************************/
+-static void eepro_disable(struct nic *nic)
+-{
+-	eepro_sw2bank0(ioaddr);	/* Switch to bank 0 */
+-	/* Flush the Tx and disable Rx */
+-	outb(STOP_RCV_CMD, ioaddr);
+-	tx_start = tx_end = (XMT_LOWER_LIMIT << 8);
+-	tx_last = 0;
+-	/* Reset the 82595 */
+-	eepro_full_reset(ioaddr);
+-}
+-
+-static int read_eeprom(int location)
+-{
+-	int		i;
+-	unsigned short	retval = 0;
+-	int		ee_addr = ioaddr + eeprom_reg;
+-	int		read_cmd = location | EE_READ_CMD;
+-	int		ctrl_val = EECS;
+-
+-	if (eepro == LAN595FX_10ISA) {
+-		eepro_sw2bank1(ioaddr);
+-		outb(0x00, ioaddr + STATUS_REG);
+-	}
+-	eepro_sw2bank2(ioaddr);
+-	outb(ctrl_val, ee_addr);
+-	/* shift the read command bits out */
+-	for (i = 8; i >= 0; i--) {
+-		short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI : ctrl_val;
+-		outb(outval, ee_addr);
+-		outb(outval | EESK, ee_addr);	/* EEPROM clock tick */
+-		eeprom_delay();
+-		outb(outval, ee_addr);		/* finish EEPROM clock tick */
+-		eeprom_delay();
+-	}
+-	outb(ctrl_val, ee_addr);
+-	for (i = 16; i > 0; i--) {
+-		outb(ctrl_val | EESK, ee_addr);
+-		eeprom_delay();
+-		retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
+-		outb(ctrl_val, ee_addr);
+-		eeprom_delay();
+-	}
+-	/* terminate the EEPROM access */
+-	ctrl_val &= ~EECS;
+-	outb(ctrl_val | EESK, ee_addr);
+-	eeprom_delay();
+-	outb(ctrl_val, ee_addr);
+-	eeprom_delay();
+-	eepro_sw2bank0(ioaddr);
+-	return (retval);
+-}
+-
+-static int eepro_probe1(struct nic *nic)
+-{
+-	int		i, id, counter, l_eepro = 0;
+-	union {
+-		unsigned char	caddr[ETH_ALEN];
+-		unsigned short	saddr[ETH_ALEN/2];
+-	} station_addr;
+-	char		*name;
+-
+-	id = inb(ioaddr + ID_REG);
+-	if ((id & ID_REG_MASK) != ID_REG_SIG)
+-		return (0);
+-	counter = id & R_ROBIN_BITS;
+-	if (((id = inb(ioaddr + ID_REG)) & R_ROBIN_BITS) != (counter + 0x40))
+-		return (0);
+-	/* yes the 82595 has been found */
+-	station_addr.saddr[2] = read_eeprom(2);
+-	if (station_addr.saddr[2] == 0x0000 || station_addr.saddr[2] == 0xFFFF) {
+-		l_eepro = 3;
+-		eepro = LAN595FX_10ISA;
+-		eeprom_reg= EEPROM_REG_10;
+-		rcv_start = RCV_START_10;
+-		xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10;
+-		xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10;
+-		station_addr.saddr[2] = read_eeprom(2);
+-	}
+-	station_addr.saddr[1] = read_eeprom(3);
+-	station_addr.saddr[0] = read_eeprom(4);
+-	if (l_eepro)
+-		name = "Intel EtherExpress 10 ISA";
+-	else if (read_eeprom(7) == ee_FX_INT2IRQ) {
+-		name = "Intel EtherExpress Pro/10+ ISA";
+-		l_eepro = 2;
+-	} else if (station_addr.saddr[0] == SA_ADDR1) {
+-		name = "Intel EtherExpress Pro/10 ISA";
+-		l_eepro = 1;
+-	} else {
+-		l_eepro = 0;
+-		name = "Intel 82595-based LAN card";
+-	}
+-	station_addr.saddr[0] = swap16(station_addr.saddr[0]);
+-	station_addr.saddr[1] = swap16(station_addr.saddr[1]);
+-	station_addr.saddr[2] = swap16(station_addr.saddr[2]);
+-	for (i = 0; i < ETH_ALEN; i++) {
+-		nic->node_addr[i] = station_addr.caddr[i];
+-	}
+-	printf("\n%s ioaddr %#hX, addr %!", name, ioaddr, nic->node_addr);
+-	mem_start = RCV_LOWER_LIMIT << 8;
+-	if ((mem_end & 0x3F) < 3 || (mem_end & 0x3F) > 29)
+-		mem_end = RCV_UPPER_LIMIT << 8;
+-	else {
+-		mem_end = mem_end * 1024 + (RCV_LOWER_LIMIT << 8);
+-		rcv_ram = mem_end - (RCV_LOWER_LIMIT << 8);
+-	}
+-	printf(", Rx mem %dK, if %s\n", (mem_end - mem_start) >> 10,
+-		GetBit(read_eeprom(5), ee_BNC_TPE) ? "BNC" : "TP");
+-	return (1);
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-struct nic *eepro_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	unsigned short		*p;
+-	/* same probe list as the Linux driver */
+-	static unsigned short	ioaddrs[] = {
+-		0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};
+-
+-	if (probe_addrs == 0 || probe_addrs[0] == 0)
+-		probe_addrs = ioaddrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; p++) {
+-		if (eepro_probe1(nic))
+-			break;
+-	}
+-	if (*p == 0)
+-		return (0);
+-	eepro_reset(nic);
+-	/* point to NIC specific routines */
+-	nic->reset = eepro_reset;
+-	nic->poll = eepro_poll;
+-	nic->transmit = eepro_transmit;
+-	nic->disable = eepro_disable;
+-	return (nic);
+-}
+diff -Naur grub-0.97.orig/netboot/eepro100.c grub-0.97/netboot/eepro100.c
+--- grub-0.97.orig/netboot/eepro100.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/eepro100.c	2005-08-31 19:03:35.000000000 +0000
+@@ -80,8 +80,8 @@
+  *
+  * Caveats:
+  *
+- * The etherboot framework moves the code to the 32k segment from
+- * 0x98000 to 0xa0000. There is just a little room between the end of
++ * The Etherboot framework moves the code to the 48k segment from
++ * 0x94000 to 0xa0000. There is just a little room between the end of
+  * this driver and the 0xa0000 address. If you compile in too many
+  * features, this will overflow.
+  * The number under "hex" in the output of size that scrolls by while
+@@ -92,17 +92,13 @@
+ /* The etherboot authors seem to dislike the argument ordering in
+  * outb macros that Linux uses. I disklike the confusion that this
+  * has caused even more.... This file uses the Linux argument ordering.  */
+-/* Sorry not us. It's inherted code from FreeBSD. [The authors] */
++/* Sorry not us. It's inherited code from FreeBSD. [The authors] */
+ 
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ #include "timer.h"
+ 
+-#undef	virt_to_bus
+-#define	virt_to_bus(x)	((unsigned long)x)
+-
+ static int ioaddr;
+ 
+ typedef unsigned char  u8;
+@@ -121,6 +117,18 @@
+   SCBEarlyRx = 20,                /* Early receive byte count. */
+ };
+ 
++enum SCBCmdBits {
++	SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000,
++	SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400,
++	SCBTriggerIntr=0x0200, SCBMaskAll=0x0100,
++	/* The rest are Rx and Tx commands. */
++	CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050,
++	CUCmdBase=0x0060,	/* CU Base address (set to zero) . */
++	CUDumpStats=0x0070, /* Dump then reset stats counters. */
++	RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006,
++	RxResumeNoResources=0x0007,
++};
++
+ static int do_eeprom_cmd(int cmd, int cmd_len);
+ void hd(void *where, int n);
+ 
+@@ -139,8 +147,6 @@
+ #define EE_WRITE_1      0x4806
+ #define EE_ENB          (0x4800 | EE_CS)
+ 
+-#define udelay(n)       waiton_timer2(((n)*TICKS_PER_MS)/1000)
+-
+ /* The EEPROM commands include the alway-set leading bit. */
+ #define EE_READ_CMD     6
+ 
+@@ -184,9 +190,18 @@
+    Typically this takes 0 ticks. */
+ static inline void wait_for_cmd_done(int cmd_ioaddr)
+ {
+-  short wait = 100;
+-  do   ;
+-  while(inb(cmd_ioaddr) && --wait >= 0);
++  int wait = 0;
++  int delayed_cmd;
++
++  do
++    if (inb(cmd_ioaddr) == 0) return;
++  while(++wait <= 100);
++  delayed_cmd = inb(cmd_ioaddr);
++  do
++    if (inb(cmd_ioaddr) == 0) break;
++  while(++wait <= 10000);
++  printf("Command %2.2x was not immediately accepted, %d ticks!\n",
++      delayed_cmd, wait);
+ }
+ 
+ /* Elements of the dump_statistics block. This block must be lword aligned. */
+@@ -212,35 +227,30 @@
+ 
+ /* A speedo3 TX buffer descriptor with two buffers... */
+ static struct TxFD {
+-  volatile s16 status;
+-  s16 command;
+-  u32 link;          /* void * */
+-  u32 tx_desc_addr;  /* (almost) Always points to the tx_buf_addr element. */
+-  s32 count;         /* # of TBD (=2), Tx start thresh., etc. */
+-                     /* This constitutes two "TBD" entries: hdr and data */
+-  u32 tx_buf_addr0;  /* void *, header of frame to be transmitted.  */
+-  s32 tx_buf_size0;  /* Length of Tx hdr. */
+-  u32 tx_buf_addr1;  /* void *, data to be transmitted.  */
+-  s32 tx_buf_size1;  /* Length of Tx data. */
++	volatile s16 status;
++	s16 command;
++	u32 link;          /* void * */
++	u32 tx_desc_addr;  /* (almost) Always points to the tx_buf_addr element. */
++	s32 count;         /* # of TBD (=2), Tx start thresh., etc. */
++	/* This constitutes two "TBD" entries: hdr and data */
++	u32 tx_buf_addr0;  /* void *, header of frame to be transmitted.  */
++	s32 tx_buf_size0;  /* Length of Tx hdr. */
++	u32 tx_buf_addr1;  /* void *, data to be transmitted.  */
++	s32 tx_buf_size1;  /* Length of Tx data. */
+ } txfd;
+ 
+ struct RxFD {               /* Receive frame descriptor. */
+-  volatile s16 status;
+-  s16 command;
+-  u32 link;                 /* struct RxFD * */
+-  u32 rx_buf_addr;          /* void * */
+-  u16 count;
+-  u16 size;
+-  char packet[1518];
++	volatile s16 status;
++	s16 command;
++	u32 link;                 /* struct RxFD * */
++	u32 rx_buf_addr;          /* void * */
++	u16 count;
++	u16 size;
++	char packet[1518];
+ };
+ 
+-#ifdef	USE_LOWMEM_BUFFER
+-#define rxfd ((struct RxFD *)(0x10000 - sizeof(struct RxFD)))
+-#define ACCESS(x) x->
+-#else
+ static struct RxFD rxfd;
+ #define ACCESS(x) x.
+-#endif
+ 
+ static int congenb = 0;         /* Enable congestion control in the DP83840. */
+ static int txfifo = 8;          /* Tx FIFO threshold in 4 byte units, 0-15 */
+@@ -256,8 +266,7 @@
+   u32 link;
+   unsigned char data[22];
+ } confcmd = {
+-  0, CmdConfigure,
+-  (u32) & txfd,
++  0, 0, 0, /* filled in later */
+   {22, 0x08, 0, 0,  0, 0x80, 0x32, 0x03,  1, /* 1=Use MII  0=Use AUI */
+    0, 0x2E, 0,  0x60, 0,
+    0xf2, 0x48,   0, 0x40, 0xf2, 0x80,        /* 0x40=Force full-duplex */
+@@ -276,19 +285,20 @@
+ 
+ static int mdio_write(int phy_id, int location, int value)
+ {
+-  int val, boguscnt = 64*4;         /* <64 usec. to complete, typ 27 ticks */
++	int val, boguscnt = 64*4;         /* <64 usec. to complete, typ 27 ticks */
+ 
+-  outl(0x04000000 | (location<<16) | (phy_id<<21) | value,
+-       ioaddr + SCBCtrlMDI);
+-  do {
+-    udelay(16);
+-
+-    val = inl(ioaddr + SCBCtrlMDI);
+-    if (--boguscnt < 0) {
+-      printf(" mdio_write() timed out with val = %X.\n", val);
+-    }
+-  } while (! (val & 0x10000000));
+-  return val & 0xffff;
++	outl(0x04000000 | (location<<16) | (phy_id<<21) | value,
++	     ioaddr + SCBCtrlMDI);
++	do {
++		udelay(16);
++		
++		val = inl(ioaddr + SCBCtrlMDI);
++		if (--boguscnt < 0) {
++			printf(" mdio_write() timed out with val = %X.\n", val);
++			break;
++		}
++	} while (! (val & 0x10000000));
++	return val & 0xffff;
+ }
+ 
+ /* Support function: mdio_read
+@@ -298,17 +308,19 @@
+  */
+ static int mdio_read(int phy_id, int location)
+ {
+-  int val, boguscnt = 64*4;               /* <64 usec. to complete, typ 27 ticks */
+-  outl(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
+-  do {
+-    udelay(16);
+-
+-    val = inl(ioaddr + SCBCtrlMDI);
+-    if (--boguscnt < 0) {
+-      printf( " mdio_read() timed out with val = %X.\n", val);
+-    }
+-  } while (! (val & 0x10000000));
+-  return val & 0xffff;
++	int val, boguscnt = 64*4;               /* <64 usec. to complete, typ 27 ticks */
++	outl(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
++	do {
++		udelay(16);
++		
++		val = inl(ioaddr + SCBCtrlMDI);
++
++		if (--boguscnt < 0) {
++			printf( " mdio_read() timed out with val = %X.\n", val);
++			break;
++		}
++	} while (! (val & 0x10000000));
++	return val & 0xffff;
+ }
+ 
+ /* The fixes for the code were kindly provided by Dragan Stancevic
+@@ -340,25 +352,26 @@
+ 	return retval;
+ }
+ 
++#if 0
+ static inline void whereami (const char *str)
+ {
+-#if	0
+   printf ("%s\n", str);
+   sleep (2);
+-#endif
+ }
++#else
++#define whereami(s)
++#endif
+ 
+-/* function: eepro100_reset
+- * resets the card. This is used to allow Etherboot to probe the card again
+- * from a "virginal" state....
+- * Arguments: none
+- *
+- * returns:   void.
+- */
+-
+-static void eepro100_reset(struct nic *nic)
++static void eepro100_irq(struct nic *nic __unused, irq_action_t action __unused)
+ {
+-  outl(0, ioaddr + SCBPort);
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
+ }
+ 
+ /* function: eepro100_transmit
+@@ -373,61 +386,87 @@
+ 
+ static void eepro100_transmit(struct nic *nic, const char *d, unsigned int t, unsigned int s, const char *p)
+ {
+-  struct eth_hdr {
+-    unsigned char dst_addr[ETH_ALEN];
+-    unsigned char src_addr[ETH_ALEN];
+-    unsigned short type;
+-  } hdr;
+-  unsigned short status;
+-  int to;
+-  int s1, s2;
+-
+-  status = inw(ioaddr + SCBStatus);
+-  /* Acknowledge all of the current interrupt sources ASAP. */
+-  outw(status & 0xfc00, ioaddr + SCBStatus);
++	struct eth_hdr {
++		unsigned char dst_addr[ETH_ALEN];
++		unsigned char src_addr[ETH_ALEN];
++		unsigned short type;
++	} hdr;
++	unsigned short status;
++	int s1, s2;
++
++	status = inw(ioaddr + SCBStatus);
++	/* Acknowledge all of the current interrupt sources ASAP. */
++	outw(status & 0xfc00, ioaddr + SCBStatus);
+ 
+ #ifdef	DEBUG
+-  printf ("transmitting type %hX packet (%d bytes). status = %hX, cmd=%hX\n",
+-	  t, s, status, inw (ioaddr + SCBCmd));
++	printf ("transmitting type %hX packet (%d bytes). status = %hX, cmd=%hX\n",
++		t, s, status, inw (ioaddr + SCBCmd));
+ #endif
+ 
+-  memcpy (&hdr.dst_addr, d, ETH_ALEN);
+-  memcpy (&hdr.src_addr, nic->node_addr, ETH_ALEN);
++	memcpy (&hdr.dst_addr, d, ETH_ALEN);
++	memcpy (&hdr.src_addr, nic->node_addr, ETH_ALEN);
+ 
+-  hdr.type = htons (t);
++	hdr.type = htons (t);
+ 
+-  txfd.status = 0;
+-  txfd.command = CmdSuspend | CmdTx | CmdTxFlex;
+-  txfd.link   = virt_to_bus (&txfd);
+-  txfd.count   = 0x02208000;
+-  txfd.tx_desc_addr = (u32)&txfd.tx_buf_addr0;
++	txfd.status = 0;
++	txfd.command = CmdSuspend | CmdTx | CmdTxFlex;
++	txfd.link   = virt_to_bus (&txfd);
++	txfd.count   = 0x02208000;
++	txfd.tx_desc_addr = virt_to_bus(&txfd.tx_buf_addr0);
+ 
+-  txfd.tx_buf_addr0 = virt_to_bus (&hdr);
+-  txfd.tx_buf_size0 = sizeof (hdr);
++	txfd.tx_buf_addr0 = virt_to_bus (&hdr);
++	txfd.tx_buf_size0 = sizeof (hdr);
+ 
+-  txfd.tx_buf_addr1 = virt_to_bus (p);
+-  txfd.tx_buf_size1 = s;
++	txfd.tx_buf_addr1 = virt_to_bus (p);
++	txfd.tx_buf_size1 = s;
+ 
+ #ifdef	DEBUG
+-  printf ("txfd: \n");
+-  hd (&txfd, sizeof (txfd));
++	printf ("txfd: \n");
++	hd (&txfd, sizeof (txfd));
+ #endif
+ 
+-  outl(virt_to_bus(&txfd), ioaddr + SCBPointer);
+-  outw(INT_MASK | CU_START, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
+-
+-  s1 = inw (ioaddr + SCBStatus);
+-  load_timer2(10*TICKS_PER_MS);		/* timeout 10 ms for transmit */
+-  while (!txfd.status && timer2_running())
+-    /* Wait */;
+-  s2 = inw (ioaddr + SCBStatus);
++	outl(virt_to_bus(&txfd), ioaddr + SCBPointer);
++	outw(INT_MASK | CU_START, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
++
++	s1 = inw (ioaddr + SCBStatus);
++	load_timer2(10*TICKS_PER_MS);		/* timeout 10 ms for transmit */
++	while (!txfd.status && timer2_running())
++		/* Wait */;
++	s2 = inw (ioaddr + SCBStatus);
+ 
+ #ifdef	DEBUG
+-  printf ("s1 = %hX, s2 = %hX.\n", s1, s2);
++	printf ("s1 = %hX, s2 = %hX.\n", s1, s2);
+ #endif
+ }
+ 
++/*
++ * Sometimes the receiver stops making progress.  This routine knows how to
++ * get it going again, without losing packets or being otherwise nasty like
++ * a chip reset would be.  Previously the driver had a whole sequence
++ * of if RxSuspended, if it's no buffers do one thing, if it's no resources,
++ * do another, etc.  But those things don't really matter.  Separate logic
++ * in the ISR provides for allocating buffers--the other half of operation
++ * is just making sure the receiver is active.  speedo_rx_soft_reset does that.
++ * This problem with the old, more involved algorithm is shown up under
++ * ping floods on the order of 60K packets/second on a 100Mbps fdx network.
++ */
++static void
++speedo_rx_soft_reset(void)
++{
++  wait_for_cmd_done(ioaddr + SCBCmd);
++	/*
++	* Put the hardware into a known state.
++	*/
++	outb(RX_ABORT, ioaddr + SCBCmd);
++
++	ACCESS(rxfd)rx_buf_addr = 0xffffffff;
++
++  wait_for_cmd_done(ioaddr + SCBCmd);
++
++	outb(RX_START, ioaddr + SCBCmd);
++}
++
+ /* function: eepro100_poll / eth_poll
+  * This recieves a packet from the network.
+  *
+@@ -440,34 +479,87 @@
+  *            returns the length of the packet in nic->packetlen.
+  */
+ 
+-static int eepro100_poll(struct nic *nic)
++static int eepro100_poll(struct nic *nic, int retrieve)
+ {
+-  if (!ACCESS(rxfd)status)
+-    return 0;
++  unsigned int status;
++  status = inw(ioaddr + SCBStatus);
+ 
+-  /* Ok. We got a packet. Now restart the reciever.... */
+-  ACCESS(rxfd)status = 0;
+-  ACCESS(rxfd)command = 0xc000;
+-  outl(virt_to_bus(&(ACCESS(rxfd)status)), ioaddr + SCBPointer);
+-  outw(INT_MASK | RX_START, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
++	if (!ACCESS(rxfd)status)
++		return 0;
++
++	/* There is a packet ready */
++	if ( ! retrieve ) return 1;
++
++  /*
++   * The chip may have suspended reception for various reasons.
++   * Check for that, and re-prime it should this be the case.
++   */
++  switch ((status >> 2) & 0xf) {
++  case 0: /* Idle */
++    break;
++  case 1:	/* Suspended */
++  case 2:	/* No resources (RxFDs) */
++  case 9:	/* Suspended with no more RBDs */
++  case 10: /* No resources due to no RBDs */
++  case 12: /* Ready with no RBDs */
++    speedo_rx_soft_reset();
++    break;
++  case 3:  case 5:  case 6:  case 7:  case 8:
++  case 11:  case 13:  case 14:  case 15:
++    /* these are all reserved values */
++    break;
++  }
++
++	/* Ok. We got a packet. Now restart the reciever.... */
++	ACCESS(rxfd)status = 0;
++	ACCESS(rxfd)command = 0xc000;
++	outl(virt_to_bus(&(ACCESS(rxfd)status)), ioaddr + SCBPointer);
++	outw(INT_MASK | RX_START, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
+ 
+ #ifdef	DEBUG
+-  printf ("Got a packet: Len = %d.\n", ACCESS(rxfd)count & 0x3fff);
++	printf ("Got a packet: Len = %d.\n", ACCESS(rxfd)count & 0x3fff);
+ #endif
+-  nic->packetlen =  ACCESS(rxfd)count & 0x3fff;
+-  memcpy (nic->packet, ACCESS(rxfd)packet, nic->packetlen);
++	nic->packetlen =  ACCESS(rxfd)count & 0x3fff;
++	memcpy (nic->packet, ACCESS(rxfd)packet, nic->packetlen);
+ #ifdef	DEBUG
+-  hd (nic->packet, 0x30);
++	hd (nic->packet, 0x30);
+ #endif
+-  return 1;
++	return 1;
+ }
+ 
+-static void eepro100_disable(struct nic *nic)
++/* function: eepro100_disable
++ * resets the card. This is used to allow Etherboot or Linux
++ * to probe the card again from a "virginal" state....
++ * Arguments: none
++ *
++ * returns:   void.
++ */
++static void eepro100_disable(struct dev *dev __unused)
+ {
+-    /* See if this PartialReset solves the problem with interfering with
+-       kernel operation after Etherboot hands over. - Ken 20001102 */
+-    outl(2, ioaddr + SCBPort);
++/* from eepro100_reset */
++	outl(0, ioaddr + SCBPort);
++/* from eepro100_disable */
++	/* See if this PartialReset solves the problem with interfering with
++	   kernel operation after Etherboot hands over. - Ken 20001102 */
++	outl(2, ioaddr + SCBPort);
++
++	/* The following is from the Intel e100 driver.
++	 * This hopefully solves the problem with hanging hard DOS images. */
++
++	/* wait for the reset to take effect */
++	udelay(20);
++
++	/* Mask off our interrupt line -- it is unmasked after reset */
++	{
++		u16 intr_status;
++		/* Disable interrupts on our PCI board by setting the mask bit */
++		outw(INT_MASK, ioaddr + SCBCmd);
++		intr_status = inw(ioaddr + SCBStatus);
++		/* ack and clear intrs */
++		outw(intr_status, ioaddr + SCBStatus);
++		inw(ioaddr + SCBStatus);
++	}
+ }
+ 
+ /* exported function: eepro100_probe / eth_probe
+@@ -478,25 +570,30 @@
+  *            leaves the 82557 initialized, and ready to recieve packets.
+  */
+ 
+-struct nic *eepro100_probe(struct nic *nic, unsigned short *probeaddrs, struct pci_device *p)
++static int eepro100_probe(struct dev *dev, struct pci_device *p)
+ {
++	struct nic *nic = (struct nic *)dev;
+ 	unsigned short sum = 0;
+ 	int i;
+ 	int read_cmd, ee_size;
+-	unsigned short value;
+ 	int options;
+-	int promisc;
++	int rx_mode;
+ 
+ 	/* we cache only the first few words of the EEPROM data
+ 	   be careful not to access beyond this array */
+ 	unsigned short eeprom[16];
+ 
+-	if (probeaddrs == 0 || probeaddrs[0] == 0)
++	if (p->ioaddr == 0)
+ 		return 0;
+-	ioaddr = probeaddrs[0] & ~3; /* Mask the bit that says "this is an io addr" */
++	ioaddr = p->ioaddr & ~3; /* Mask the bit that says "this is an io addr" */
++	nic->ioaddr = ioaddr;
+ 
+ 	adjust_pci_device(p);
+ 
++	/* Copy IRQ from PCI information */
++	/* nic->irqno = pci->irq; */
++	nic->irqno = 0;
++
+ 	if ((do_eeprom_cmd(EE_READ_CMD << 24, 27) & 0xffe0000)
+ 		== 0xffe0000) {
+ 		ee_size = 0x100;
+@@ -513,123 +610,138 @@
+ 		sum += value;
+ 	}
+ 
+-  for (i=0;i<ETH_ALEN;i++) {
+-	nic->node_addr[i] =  (eeprom[i/2] >> (8*(i&1))) & 0xff;
+-  }
+-  printf ("Ethernet addr: %!\n", nic->node_addr);
+-
+-  if (sum != 0xBABA)
+-	printf("eepro100: Invalid EEPROM checksum %#hX, "
+-	       "check settings before activating this device!\n", sum);
+-  outl(0, ioaddr + SCBPort);
+-  udelay (10000);
+-
+-  whereami ("Got eeprom.");
+-
+-  outl(virt_to_bus(&lstats), ioaddr + SCBPointer);
+-  outw(INT_MASK | CU_STATSADDR, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
+-
+-  whereami ("set stats addr.");
+-  /* INIT RX stuff. */
+-
+-  /* Base = 0 */
+-  outl(0, ioaddr + SCBPointer);
+-  outw(INT_MASK | RX_ADDR_LOAD, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
+-
+-  whereami ("set rx base addr.");
+-
+-  ACCESS(rxfd)status  = 0x0001;
+-  ACCESS(rxfd)command = 0x0000;
+-  ACCESS(rxfd)link    = virt_to_bus(&(ACCESS(rxfd)status));
+-  ACCESS(rxfd)rx_buf_addr = (int) &nic->packet;
+-  ACCESS(rxfd)count   = 0;
+-  ACCESS(rxfd)size    = 1528;
+-
+-  outl(virt_to_bus(&(ACCESS(rxfd)status)), ioaddr + SCBPointer);
+-  outw(INT_MASK | RX_START, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
+-
+-  whereami ("started RX process.");
+-
+-  /* Start the reciever.... */
+-  ACCESS(rxfd)status = 0;
+-  ACCESS(rxfd)command = 0xc000;
+-  outl(virt_to_bus(&(ACCESS(rxfd)status)), ioaddr + SCBPointer);
+-  outw(INT_MASK | RX_START, ioaddr + SCBCmd);
+-
+-  /* INIT TX stuff. */
+-
+-  /* Base = 0 */
+-  outl(0, ioaddr + SCBPointer);
+-  outw(INT_MASK | CU_CMD_BASE, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
+-
+-  whereami ("set TX base addr.");
+-
+-  txfd.command      = (CmdIASetup);
+-  txfd.status       = 0x0000;
+-  txfd.link         = virt_to_bus (&confcmd);
+-
+-  {
+-	char *t = (char *)&txfd.tx_desc_addr;
++	for (i=0;i<ETH_ALEN;i++) {
++		nic->node_addr[i] =  (eeprom[i/2] >> (8*(i&1))) & 0xff;
++	}
++	printf ("Ethernet addr: %!\n", nic->node_addr);
+ 
+-	for (i=0;i<ETH_ALEN;i++)
+-		t[i] = nic->node_addr[i];
+-  }
++	if (sum != 0xBABA)
++		printf("eepro100: Invalid EEPROM checksum %#hX, "
++		       "check settings before activating this device!\n", sum);
++	outl(0, ioaddr + SCBPort);
++	udelay (10000);
++	whereami ("Got eeprom.");
++
++	/* Base = 0 */
++	outl(0, ioaddr + SCBPointer);
++	outw(INT_MASK | RX_ADDR_LOAD, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
++	whereami ("set rx base addr.");
++
++	outl(virt_to_bus(&lstats), ioaddr + SCBPointer);
++	outw(INT_MASK | CU_STATSADDR, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
++	whereami ("set stats addr.");
++
++	/* INIT RX stuff. */
++	ACCESS(rxfd)status  = 0x0001;
++	ACCESS(rxfd)command = 0x0000;
++	ACCESS(rxfd)link    = virt_to_bus(&(ACCESS(rxfd)status));
++	ACCESS(rxfd)rx_buf_addr = virt_to_bus(&nic->packet);
++	ACCESS(rxfd)count   = 0;
++	ACCESS(rxfd)size    = 1528;
++
++	outl(virt_to_bus(&(ACCESS(rxfd)status)), ioaddr + SCBPointer);
++	outw(INT_MASK | RX_START, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
++
++	whereami ("started RX process.");
++
++	/* Start the reciever.... */
++	ACCESS(rxfd)status = 0;
++	ACCESS(rxfd)command = 0xc000;
++	outl(virt_to_bus(&(ACCESS(rxfd)status)), ioaddr + SCBPointer);
++	outw(INT_MASK | RX_START, ioaddr + SCBCmd);
++
++	/* INIT TX stuff. */
++
++	/* Base = 0 */
++	outl(0, ioaddr + SCBPointer);
++	outw(INT_MASK | CU_CMD_BASE, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
++
++	whereami ("set TX base addr.");
++
++	txfd.command      = (CmdIASetup);
++	txfd.status       = 0x0000;
++	txfd.link         = virt_to_bus (&confcmd);
++
++	{
++		char *t = (char *)&txfd.tx_desc_addr;
++		
++		for (i=0;i<ETH_ALEN;i++)
++			t[i] = nic->node_addr[i];
++	}
+ 
+ #ifdef	DEBUG
+-  printf ("Setup_eaddr:\n");
+-  hd (&txfd, 0x20);
++	printf ("Setup_eaddr:\n");
++	hd (&txfd, 0x20);
+ #endif
+-  /*      options = 0x40; */ /* 10mbps half duplex... */
+-  options = 0x00;            /* Autosense */
+-
+-  promisc = 0;
+-
+-  if (   ((eeprom[6]>>8) & 0x3f) == DP83840
+-	  || ((eeprom[6]>>8) & 0x3f) == DP83840A) {
+-	int mdi_reg23 = mdio_read(eeprom[6] & 0x1f, 23) | 0x0422;
+-	if (congenb)
+-	  mdi_reg23 |= 0x0100;
+-	printf("  DP83840 specific setup, setting register 23 to %hX.\n",
+-	       mdi_reg23);
+-	mdio_write(eeprom[6] & 0x1f, 23, mdi_reg23);
+-  }
+-  whereami ("Done DP8340 special setup.");
+-  if (options != 0) {
+-	mdio_write(eeprom[6] & 0x1f, 0,
+-		   ((options & 0x20) ? 0x2000 : 0) |    /* 100mbps? */
+-		   ((options & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+-	whereami ("set mdio_register.");
+-  }
++	/*      options = 0x40; */ /* 10mbps half duplex... */
++	options = 0x00;            /* Autosense */
+ 
+-  confcmd.command  = CmdSuspend | CmdConfigure;
+-  confcmd.status   = 0x0000;
+-  confcmd.link     = virt_to_bus (&txfd);
+-  confcmd.data[1]  = (txfifo << 4) | rxfifo;
+-  confcmd.data[4]  = rxdmacount;
+-  confcmd.data[5]  = txdmacount + 0x80;
+-  confcmd.data[15] = promisc ? 0x49: 0x48;
+-  confcmd.data[19] = (options & 0x10) ? 0xC0 : 0x80;
+-  confcmd.data[21] = promisc ? 0x0D: 0x05;
++#ifdef PROMISC
++	rx_mode = 3;
++#elif ALLMULTI
++	rx_mode = 1;
++#else
++	rx_mode = 0;
++#endif
+ 
+-  outl(virt_to_bus(&txfd), ioaddr + SCBPointer);
+-  outw(INT_MASK | CU_START, ioaddr + SCBCmd);
+-  wait_for_cmd_done(ioaddr + SCBCmd);
++	if (   ((eeprom[6]>>8) & 0x3f) == DP83840
++	       || ((eeprom[6]>>8) & 0x3f) == DP83840A) {
++		int mdi_reg23 = mdio_read(eeprom[6] & 0x1f, 23) | 0x0422;
++		if (congenb)
++			mdi_reg23 |= 0x0100;
++		printf("  DP83840 specific setup, setting register 23 to %hX.\n",
++		       mdi_reg23);
++		mdio_write(eeprom[6] & 0x1f, 23, mdi_reg23);
++	}
++	whereami ("Done DP8340 special setup.");
++	if (options != 0) {
++		mdio_write(eeprom[6] & 0x1f, 0,
++			   ((options & 0x20) ? 0x2000 : 0) |    /* 100mbps? */
++			   ((options & 0x10) ? 0x0100 : 0)); /* Full duplex? */
++		whereami ("set mdio_register.");
++	}
+ 
+-  whereami ("started TX thingy (config, iasetup).");
++	confcmd.command  = CmdSuspend | CmdConfigure;
++	confcmd.status   = 0x0000;
++	confcmd.link     = virt_to_bus (&txfd);
++	confcmd.data[1]  = (txfifo << 4) | rxfifo;
++	confcmd.data[4]  = rxdmacount;
++	confcmd.data[5]  = txdmacount + 0x80;
++	confcmd.data[15] = (rx_mode & 2) ? 0x49: 0x48;
++	confcmd.data[19] = (options & 0x10) ? 0xC0 : 0x80;
++	confcmd.data[21] = (rx_mode & 1) ? 0x0D: 0x05;
++
++	outl(virt_to_bus(&txfd), ioaddr + SCBPointer);
++	outw(INT_MASK | CU_START, ioaddr + SCBCmd);
++	wait_for_cmd_done(ioaddr + SCBCmd);
++
++	whereami ("started TX thingy (config, iasetup).");
++
++	load_timer2(10*TICKS_PER_MS);
++	while (!txfd.status && timer2_running())
++		/* Wait */;
++
++	/* Read the status register once to disgard stale data */
++	mdio_read(eeprom[6] & 0x1f, 1);
++	/* Check to see if the network cable is plugged in.
++	 * This allows for faster failure if there is nothing
++	 * we can do.
++	 */
++	if (!(mdio_read(eeprom[6] & 0x1f, 1) & (1 << 2))) {
++		printf("Valid link not established\n");
++		eepro100_disable(dev);
++		return 0;
++	}
+ 
+-  load_timer2(10*TICKS_PER_MS);
+-  while (!txfd.status && timer2_running())
+-	/* Wait */;
+-
+-  nic->reset = eepro100_reset;
+-  nic->poll = eepro100_poll;
+-  nic->transmit = eepro100_transmit;
+-  nic->disable = eepro100_disable;
+-  return nic;
++	dev->disable  = eepro100_disable;
++	nic->poll     = eepro100_poll;
++	nic->transmit = eepro100_transmit;
++	nic->irq      = eepro100_irq;
++	return 1;
+ }
+ 
+ /*********************************************************************/
+@@ -639,16 +751,59 @@
+ /* Hexdump a number of bytes from memory... */
+ void hd (void *where, int n)
+ {
+-  int i;
++	int i;
+ 
+-  while (n > 0) {
+-    printf ("%X ", where);
+-    for (i=0;i < ( (n>16)?16:n);i++)
+-      printf (" %hhX", ((char *)where)[i]);
+-    printf ("\n");
+-    n -= 16;
+-    where += 16;
+-  }
++	while (n > 0) {
++		printf ("%X ", where);
++		for (i=0;i < ( (n>16)?16:n);i++)
++			printf (" %hhX", ((char *)where)[i]);
++		printf ("\n");
++		n -= 16;
++		where += 16;
++	}
+ }
+ #endif
+ 
++static struct pci_id eepro100_nics[] = {
++PCI_ROM(0x8086, 0x1029, "id1029",        "Intel EtherExpressPro100 ID1029"),
++PCI_ROM(0x8086, 0x1030, "id1030",        "Intel EtherExpressPro100 ID1030"),
++PCI_ROM(0x8086, 0x1031, "82801cam",      "Intel 82801CAM (ICH3) Chipset Ethernet Controller"),
++PCI_ROM(0x8086, 0x1032, "eepro100-1032", "Intel PRO/100 VE Network Connection"),
++PCI_ROM(0x8086, 0x1033, "eepro100-1033", "Intel PRO/100 VM Network Connection"),
++PCI_ROM(0x8086, 0x1034, "eepro100-1034", "Intel PRO/100 VM Network Connection"),
++PCI_ROM(0x8086, 0x1035, "eepro100-1035", "Intel 82801CAM (ICH3) Chipset Ethernet Controller"),
++PCI_ROM(0x8086, 0x1036, "eepro100-1036", "Intel 82801CAM (ICH3) Chipset Ethernet Controller"),
++PCI_ROM(0x8086, 0x1037, "eepro100-1037", "Intel 82801CAM (ICH3) Chipset Ethernet Controller"),
++PCI_ROM(0x8086, 0x1038, "id1038",        "Intel PRO/100 VM Network Connection"),
++PCI_ROM(0x8086, 0x1039, "82562et",       "Intel PRO100 VE 82562ET"),
++PCI_ROM(0x8086, 0x103a, "id103a",        "Intel Corporation 82559 InBusiness 10/100"),
++PCI_ROM(0x8086, 0x103b, "82562etb",      "Intel PRO100 VE 82562ETB"),
++PCI_ROM(0x8086, 0x103c, "eepro100-103c", "Intel PRO/100 VM Network Connection"),
++PCI_ROM(0x8086, 0x103d, "eepro100-103d", "Intel PRO/100 VE Network Connection"),
++PCI_ROM(0x8086, 0x103e, "eepro100-103e", "Intel PRO/100 VM Network Connection"),
++PCI_ROM(0x8086, 0x1059, "82551qm",       "Intel PRO/100 M Mobile Connection"),
++PCI_ROM(0x8086, 0x1209, "82559er",       "Intel EtherExpressPro100 82559ER"),
++PCI_ROM(0x8086, 0x1227, "82865",         "Intel 82865 EtherExpress PRO/100A"),
++PCI_ROM(0x8086, 0x1228, "82556",         "Intel 82556 EtherExpress PRO/100 Smart"),
++PCI_ROM(0x8086, 0x1229, "eepro100",      "Intel EtherExpressPro100"),
++PCI_ROM(0x8086, 0x2449, "82562em",       "Intel EtherExpressPro100 82562EM"),
++PCI_ROM(0x8086, 0x2459, "82562-1",       "Intel 82562 based Fast Ethernet Connection"),
++PCI_ROM(0x8086, 0x245d, "82562-2",       "Intel 82562 based Fast Ethernet Connection"),
++PCI_ROM(0x8086, 0x1050, "82562ez",       "Intel 82562EZ Network Connection"),
++PCI_ROM(0x8086, 0x5200, "eepro100-5200", "Intel EtherExpress PRO/100 Intelligent Server"),
++PCI_ROM(0x8086, 0x5201, "eepro100-5201", "Intel EtherExpress PRO/100 Intelligent Server"),
++};
++
++/* Cards with device ids 0x1030 to 0x103F, 0x2449, 0x2459 or 0x245D might need
++ * a workaround for hardware bug on 10 mbit half duplex (see linux driver eepro100.c)
++ * 2003/03/17 gbaum */
++
++
++struct pci_driver eepro100_driver = {
++	.type      = NIC_DRIVER,
++	.name      = "EEPRO100",
++	.probe     = eepro100_probe,
++	.ids       = eepro100_nics,
++	.id_count  = sizeof(eepro100_nics)/sizeof(eepro100_nics[0]),
++	.class     = 0
++};
+diff -Naur grub-0.97.orig/netboot/elf.h grub-0.97/netboot/elf.h
+--- grub-0.97.orig/netboot/elf.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/elf.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,234 @@
++#ifndef ELF_H
++#define ELF_H
++
++#define EI_NIDENT	16	/* Size of e_ident array. */
++
++/* Values for e_type. */
++#define ET_NONE		0	/* No file type */
++#define ET_REL		1	/* Relocatable file */
++#define ET_EXEC		2	/* Executable file */
++#define ET_DYN		3	/* Shared object file */
++#define ET_CORE		4	/* Core file */
++
++/* Values for e_machine (architecute). */
++#define EM_NONE		 0		/* No machine */
++#define EM_M32		 1		/* AT&T WE 32100 */
++#define EM_SPARC	 2		/* SUN SPARC */
++#define EM_386		 3		/* Intel 80386+ */
++#define EM_68K		 4		/* Motorola m68k family */
++#define EM_88K		 5		/* Motorola m88k family */
++#define EM_486		 6		/* Perhaps disused */
++#define EM_860		 7		/* Intel 80860 */
++#define EM_MIPS		 8		/* MIPS R3000 big-endian */
++#define EM_S370		 9		/* IBM System/370 */
++#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
++
++#define EM_PARISC	15		/* HPPA */
++#define EM_VPP500	17		/* Fujitsu VPP500 */
++#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
++#define EM_960		19		/* Intel 80960 */
++#define EM_PPC		20		/* PowerPC */
++#define EM_PPC64	21		/* PowerPC 64-bit */
++#define EM_S390		22		/* IBM S390 */
++
++#define EM_V800		36		/* NEC V800 series */
++#define EM_FR20		37		/* Fujitsu FR20 */
++#define EM_RH32		38		/* TRW RH-32 */
++#define EM_RCE		39		/* Motorola RCE */
++#define EM_ARM		40		/* ARM */
++#define EM_FAKE_ALPHA	41		/* Digital Alpha */
++#define EM_SH		42		/* Hitachi SH */
++#define EM_SPARCV9	43		/* SPARC v9 64-bit */
++#define EM_TRICORE	44		/* Siemens Tricore */
++#define EM_ARC		45		/* Argonaut RISC Core */
++#define EM_H8_300	46		/* Hitachi H8/300 */
++#define EM_H8_300H	47		/* Hitachi H8/300H */
++#define EM_H8S		48		/* Hitachi H8S */
++#define EM_H8_500	49		/* Hitachi H8/500 */
++#define EM_IA_64	50		/* Intel Merced */
++#define EM_MIPS_X	51		/* Stanford MIPS-X */
++#define EM_COLDFIRE	52		/* Motorola Coldfire */
++#define EM_68HC12	53		/* Motorola M68HC12 */
++#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
++#define EM_PCP		55		/* Siemens PCP */
++#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
++#define EM_NDR1		57		/* Denso NDR1 microprocessor */
++#define EM_STARCORE	58		/* Motorola Start*Core processor */
++#define EM_ME16		59		/* Toyota ME16 processor */
++#define EM_ST100	60		/* STMicroelectronic ST100 processor */
++#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
++#define EM_X86_64	62		/* AMD x86-64 architecture */
++#define EM_PDSP		63		/* Sony DSP Processor */
++
++#define EM_FX66		66		/* Siemens FX66 microcontroller */
++#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
++#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
++#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
++#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
++#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
++#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
++#define EM_SVX		73		/* Silicon Graphics SVx */
++#define EM_AT19		74		/* STMicroelectronics ST19 8 bit mc */
++#define EM_VAX		75		/* Digital VAX */
++#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
++#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
++#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
++#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
++#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
++#define EM_HUANY	81		/* Harvard University machine-independent object files */
++#define EM_PRISM	82		/* SiTera Prism */
++#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
++#define EM_FR30		84		/* Fujitsu FR30 */
++#define EM_D10V		85		/* Mitsubishi D10V */
++#define EM_D30V		86		/* Mitsubishi D30V */
++#define EM_V850		87		/* NEC v850 */
++#define EM_M32R		88		/* Mitsubishi M32R */
++#define EM_MN10300	89		/* Matsushita MN10300 */
++#define EM_MN10200	90		/* Matsushita MN10200 */
++#define EM_PJ		91		/* picoJava */
++#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
++#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
++#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
++#define EM_NUM		95
++
++/* Values for p_type. */
++#define PT_NULL		0	/* Unused entry. */
++#define PT_LOAD		1	/* Loadable segment. */
++#define PT_DYNAMIC	2	/* Dynamic linking information segment. */
++#define PT_INTERP	3	/* Pathname of interpreter. */
++#define PT_NOTE		4	/* Auxiliary information. */
++#define PT_SHLIB	5	/* Reserved (not used). */
++#define PT_PHDR		6	/* Location of program header itself. */
++
++/* Values for p_flags. */
++#define PF_X		0x1	/* Executable. */
++#define PF_W		0x2	/* Writable. */
++#define PF_R		0x4	/* Readable. */
++
++
++#define	ELF_PROGRAM_RETURNS_BIT	0x8000000	/* e_flags bit 31 */
++
++#define EI_MAG0		0
++#define ELFMAG0		0x7f
++
++#define EI_MAG1		1
++#define ELFMAG1		'E'
++
++#define EI_MAG2		2
++#define ELFMAG2		'L'
++
++#define EI_MAG3		3
++#define ELFMAG3		'F'
++
++#define ELFMAG		"\177ELF"
++
++#define EI_CLASS	4	/* File class byte index */
++#define ELFCLASSNONE	0	/* Invalid class */
++#define ELFCLASS32	1	/* 32-bit objects */
++#define ELFCLASS64	2	/* 64-bit objects */
++
++#define EI_DATA		5	/* Data encodeing byte index */
++#define ELFDATANONE	0	/* Invalid data encoding */
++#define ELFDATA2LSB	1	/* 2's complement little endian */
++#define ELFDATA2MSB	2	/* 2's complement big endian */
++
++#define EI_VERSION	6	/* File version byte index */
++				/* Value must be EV_CURRENT */
++
++#define EV_NONE		0	/* Invalid ELF Version */
++#define EV_CURRENT	1	/* Current version */
++
++#define ELF32_PHDR_SIZE (8*4)	/* Size of an elf program header */
++
++#ifndef ASSEMBLY
++/*
++ * ELF definitions common to all 32-bit architectures.
++ */
++
++typedef uint32_t	Elf32_Addr;
++typedef uint16_t	Elf32_Half;
++typedef uint32_t	Elf32_Off;
++typedef int32_t		Elf32_Sword;
++typedef uint32_t	Elf32_Word;
++typedef uint32_t	Elf32_Size;
++
++typedef uint64_t	Elf64_Addr;
++typedef uint16_t	Elf64_Half;
++typedef uint64_t	Elf64_Off;
++typedef int32_t		Elf64_Sword;
++typedef uint32_t	Elf64_Word;
++typedef uint64_t	Elf64_Size;
++
++/*
++ * ELF header.
++ */
++typedef struct {
++	unsigned char	e_ident[EI_NIDENT];	/* File identification. */
++	Elf32_Half	e_type;		/* File type. */
++	Elf32_Half	e_machine;	/* Machine architecture. */
++	Elf32_Word	e_version;	/* ELF format version. */
++	Elf32_Addr	e_entry;	/* Entry point. */
++	Elf32_Off	e_phoff;	/* Program header file offset. */
++	Elf32_Off	e_shoff;	/* Section header file offset. */
++	Elf32_Word	e_flags;	/* Architecture-specific flags. */
++	Elf32_Half	e_ehsize;	/* Size of ELF header in bytes. */
++	Elf32_Half	e_phentsize;	/* Size of program header entry. */
++	Elf32_Half	e_phnum;	/* Number of program header entries. */
++	Elf32_Half	e_shentsize;	/* Size of section header entry. */
++	Elf32_Half	e_shnum;	/* Number of section header entries. */
++	Elf32_Half	e_shstrndx;	/* Section name strings section. */
++} Elf32_Ehdr;
++
++typedef struct {
++	unsigned char	e_ident[EI_NIDENT];	/* File identification. */
++	Elf64_Half	e_type;		/* File type. */
++	Elf64_Half	e_machine;	/* Machine architecture. */
++	Elf64_Word	e_version;	/* ELF format version. */
++	Elf64_Addr	e_entry;	/* Entry point. */
++	Elf64_Off	e_phoff;	/* Program header file offset. */
++	Elf64_Off	e_shoff;	/* Section header file offset. */
++	Elf64_Word	e_flags;	/* Architecture-specific flags. */
++	Elf64_Half	e_ehsize;	/* Size of ELF header in bytes. */
++	Elf64_Half	e_phentsize;	/* Size of program header entry. */
++	Elf64_Half	e_phnum;	/* Number of program header entries. */
++	Elf64_Half	e_shentsize;	/* Size of section header entry. */
++	Elf64_Half	e_shnum;	/* Number of section header entries. */
++	Elf64_Half	e_shstrndx;	/* Section name strings section. */
++} Elf64_Ehdr;
++
++/*
++ * Program header.
++ */
++typedef struct {
++	Elf32_Word	p_type;		/* Entry type. */
++	Elf32_Off	p_offset;	/* File offset of contents. */
++	Elf32_Addr	p_vaddr;	/* Virtual address (not used). */
++	Elf32_Addr	p_paddr;	/* Physical address. */
++	Elf32_Size	p_filesz;	/* Size of contents in file. */
++	Elf32_Size	p_memsz;	/* Size of contents in memory. */
++	Elf32_Word	p_flags;	/* Access permission flags. */
++	Elf32_Size	p_align;	/* Alignment in memory and file. */
++} Elf32_Phdr;
++
++typedef struct {
++	Elf64_Word	p_type;		/* Entry type. */
++	Elf64_Word	p_flags;	/* Access permission flags. */
++	Elf64_Off	p_offset;	/* File offset of contents. */
++	Elf64_Addr	p_vaddr;	/* Virtual address (not used). */
++	Elf64_Addr	p_paddr;	/* Physical address. */
++	Elf64_Size	p_filesz;	/* Size of contents in file. */
++	Elf64_Size	p_memsz;	/* Size of contents in memory. */
++	Elf64_Size	p_align;	/* Alignment in memory and file. */
++} Elf64_Phdr;
++
++/* Standardized Elf image notes for booting... The name for all of these is ELFBoot */
++
++
++/* ELF Defines for the current architecture */
++#include "i386_elf.h"
++
++#endif /* ASSEMBLY */
++
++//#include "elf_boot.h"
++
++#endif /* ELF_H */
+diff -Naur grub-0.97.orig/netboot/endian.h grub-0.97/netboot/endian.h
+--- grub-0.97.orig/netboot/endian.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/endian.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,19 @@
++#ifndef ETHERBOOT_ENDIAN_H
++#define ETHERBOOT_ENDIAN_H
++
++/* Definitions for byte order, according to significance of bytes,
++   from low addresses to high addresses.  The value is what you get by
++   putting '4' in the most significant byte, '3' in the second most
++   significant byte, '2' in the second least significant byte, and '1'
++   in the least significant byte, and then writing down one digit for
++   each byte, starting with the byte at the lowest address at the left,
++   and proceeding to the byte with the highest address at the right.  */
++
++#define __LITTLE_ENDIAN 1234
++#define __BIG_ENDIAN    4321
++#define __PDP_ENDIAN    3412
++
++#include "i386_endian.h"
++
++
++#endif /* ETHERBOOT_ENDIAN_H */
+diff -Naur grub-0.97.orig/netboot/epic100.c grub-0.97/netboot/epic100.c
+--- grub-0.97.orig/netboot/epic100.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/epic100.c	2005-08-31 19:03:35.000000000 +0000
+@@ -1,15 +1,18 @@
++
+ /* epic100.c: A SMC 83c170 EPIC/100 fast ethernet driver for Etherboot */
+ 
++/* 05/06/2003	timlegge	Fixed relocation and implemented Multicast */
+ #define LINUX_OUT_MACROS
+ 
+ #include "etherboot.h"
++#include "pci.h"
+ #include "nic.h"
+-#include "cards.h"
+ #include "timer.h"
+ #include "epic100.h"
+ 
+-#undef	virt_to_bus
+-#define	virt_to_bus(x)	((unsigned long)x)
++/* Condensed operations for readability */
++#define virt_to_le32desc(addr)	cpu_to_le32(virt_to_bus(addr))
++#define le32desc_to_virt(addr)	bus_to_virt(le32_to_cpu(addr))
+ 
+ #define TX_RING_SIZE	2	/* use at least 2 buffers for TX */
+ #define RX_RING_SIZE	2
+@@ -26,23 +29,18 @@
+ 
+ /* The EPIC100 Rx and Tx buffer descriptors. */
+ struct epic_rx_desc {
+-    unsigned short status;
+-    unsigned short rxlength;
+-    unsigned long  bufaddr;
+-    unsigned short buflength;
+-    unsigned short control;
+-    unsigned long  next;
++    unsigned long status;
++    unsigned long bufaddr;
++    unsigned long buflength;
++    unsigned long next;
+ };
+-
+ /* description of the tx descriptors control bits commonly used */
+ #define TD_STDFLAGS	TD_LASTDESC
+ 
+ struct epic_tx_desc {
+-    unsigned short status;
+-    unsigned short txlength;
+-    unsigned long  bufaddr;
+-    unsigned short buflength;
+-    unsigned short control;
++    unsigned long status;
++    unsigned long bufaddr;
++    unsigned long buflength;
+     unsigned long  next;
+ };
+ 
+@@ -51,12 +49,15 @@
+ 
+ static void	epic100_open(void);
+ static void	epic100_init_ring(void);
+-static void	epic100_disable(struct nic *nic);
+-static int	epic100_poll(struct nic *nic);
++static void	epic100_disable(struct dev *dev);
++static int	epic100_poll(struct nic *nic, int retrieve);
+ static void	epic100_transmit(struct nic *nic, const char *destaddr,
+ 				 unsigned int type, unsigned int len, const char *data);
++#ifdef	DEBUG_EEPROM
+ static int	read_eeprom(int location);
++#endif
+ static int	mii_read(int phy_id, int location);
++static void     epic100_irq(struct nic *nic, irq_action_t action);
+ 
+ static int	ioaddr;
+ 
+@@ -69,6 +70,7 @@
+ static int	mmctl  ;
+ static int	mmdata ;
+ static int	lan0   ;
++static int	mc0    ;
+ static int	rxcon  ;
+ static int	txcon  ;
+ static int	prcdar ;
+@@ -80,37 +82,27 @@
+ static unsigned short	eeprom[64];
+ #endif
+ static signed char	phys[4];		/* MII device addresses. */
+-static struct epic_rx_desc	rx_ring[RX_RING_SIZE];
+-static struct epic_tx_desc	tx_ring[TX_RING_SIZE];
+-#ifdef	USE_LOWMEM_BUFFER
+-#define rx_packet ((char *)0x10000 - PKT_BUF_SZ * RX_RING_SIZE)
+-#define tx_packet ((char *)0x10000 - PKT_BUF_SZ * RX_RING_SIZE - PKT_BUF_SZ * TX_RING_SIZE)
+-#else
+-static char		rx_packet[PKT_BUF_SZ * RX_RING_SIZE];
+-static char		tx_packet[PKT_BUF_SZ * TX_RING_SIZE];
+-#endif
++static struct epic_rx_desc	rx_ring[RX_RING_SIZE]
++	__attribute__ ((aligned(4)));
++static struct epic_tx_desc	tx_ring[TX_RING_SIZE]
++	__attribute__ ((aligned(4)));
++static unsigned char	 	rx_packet[PKT_BUF_SZ * RX_RING_SIZE];
++static unsigned char		tx_packet[PKT_BUF_SZ * TX_RING_SIZE];
+ 
+ /***********************************************************************/
+ /*                    Externally visible functions                     */
+ /***********************************************************************/
+ 
+-    static void
+-epic100_reset(struct nic *nic)
+-{
+-    /* Soft reset the chip. */
+-    outl(GC_SOFT_RESET, genctl);
+-}
+ 
+-    struct nic*
+-epic100_probe(struct nic *nic, unsigned short *probeaddrs)
++    static int
++epic100_probe(struct dev *dev, struct pci_device *pci)
+ {
+-    unsigned short sum = 0;
+-    unsigned short value;
++    struct nic *nic = (struct nic *)dev;
+     int i;
+     unsigned short* ap;
+     unsigned int phy, phy_idx;
+ 
+-    if (probeaddrs == 0 || probeaddrs[0] == 0)
++    if (pci->ioaddr == 0)
+ 	return 0;
+ 
+     /* Ideally we would detect all network cards in slot order.  That would
+@@ -118,7 +110,9 @@
+        well with the current structure.  So instead we detect just the
+        Epic cards in slot order. */
+ 
+-    ioaddr = probeaddrs[0] & ~3; /* Mask the bit that says "this is an io addr" */
++    ioaddr = pci->ioaddr;
++    nic->irqno  = 0;
++    nic->ioaddr = pci->ioaddr & ~3;
+ 
+     /* compute all used static epic100 registers address */
+     command = ioaddr + COMMAND;		/* Control Register */
+@@ -130,6 +124,7 @@
+     mmctl   = ioaddr + MMCTL;		/* MII Management Interface Control */
+     mmdata  = ioaddr + MMDATA;		/* MII Management Interface Data */
+     lan0    = ioaddr + LAN0;		/* MAC address. (0x40-0x48) */
++    mc0     = ioaddr + MC0; 		/* Multicast Control */
+     rxcon   = ioaddr + RXCON;		/* Receive Control */
+     txcon   = ioaddr + TXCON;		/* Transmit Control */
+     prcdar  = ioaddr + PRCDAR;		/* PCI Receive Current Descr Address */
+@@ -160,11 +155,15 @@
+     }
+ 
+ #ifdef	DEBUG_EEPROM
++{
++    unsigned short sum = 0;
++    unsigned short value;
+     for (i = 0; i < 64; i++) {
+ 	value = read_eeprom(i);
+ 	eeprom[i] = value;
+ 	sum += value;
+     }
++}
+ 
+ #if	(EPIC_DEBUG > 1)
+     printf("EEPROM contents\n");
+@@ -202,15 +201,26 @@
+ 
+     epic100_open();
+ 
+-    nic->reset    = epic100_reset;
++    dev->disable  = epic100_disable;
+     nic->poll     = epic100_poll;
+     nic->transmit = epic100_transmit;
+-    nic->disable  = epic100_disable;
++    nic->irq      = epic100_irq;
+ 
+-    return nic;
++    return 1;
+ }
+ 
+-    static void
++static void set_rx_mode(void)
++{
++	unsigned char mc_filter[8];
++	int i;
++	memset(mc_filter, 0xff, sizeof(mc_filter));
++	outl(0x0C, rxcon);
++	for(i = 0; i < 4; i++)
++		outw(((unsigned short *)mc_filter)[i], mc0 + i*4);
++	return;
++}
++	
++   static void
+ epic100_open(void)
+ {
+     int mii_reg5;
+@@ -237,11 +247,11 @@
+     outl(tmp, txcon);
+ 
+     /* Give adress of RX and TX ring to the chip */
+-    outl(virt_to_bus(&rx_ring), prcdar);
+-    outl(virt_to_bus(&tx_ring), ptcdar);
++    outl(virt_to_le32desc(&rx_ring), prcdar);
++    outl(virt_to_le32desc(&tx_ring), ptcdar);
+ 
+     /* Start the chip's Rx process: receive unicast and broadcast */
+-    outl(0x04, rxcon);
++    set_rx_mode();
+     outl(CR_START_RX | CR_QUEUE_RX, command);
+ 
+     putchar('\n');
+@@ -252,34 +262,30 @@
+ epic100_init_ring(void)
+ {
+     int i;
+-    char* p;
+ 
+     cur_rx = cur_tx = 0;
+ 
+-    p = &rx_packet[0];
+     for (i = 0; i < RX_RING_SIZE; i++) {
+-	rx_ring[i].status    = RRING_OWN;	/* Owned by Epic chip */
+-	rx_ring[i].buflength = PKT_BUF_SZ;
+-	rx_ring[i].bufaddr   = virt_to_bus(p + (PKT_BUF_SZ * i));
+-	rx_ring[i].control   = 0;
+-	rx_ring[i].next      = virt_to_bus(&(rx_ring[i + 1]) );
++	rx_ring[i].status    = cpu_to_le32(RRING_OWN);	/* Owned by Epic chip */
++	rx_ring[i].buflength = cpu_to_le32(PKT_BUF_SZ);
++	rx_ring[i].bufaddr   = virt_to_bus(&rx_packet[i * PKT_BUF_SZ]);
++	rx_ring[i].next      = virt_to_le32desc(&rx_ring[i + 1]) ;
+     }
+     /* Mark the last entry as wrapping the ring. */
+-    rx_ring[i-1].next = virt_to_bus(&rx_ring[0]);
++    rx_ring[i-1].next = virt_to_le32desc(&rx_ring[0]);
+ 
+     /*
+      *The Tx buffer descriptor is filled in as needed,
+      * but we do need to clear the ownership bit.
+      */
+-    p = &tx_packet[0];
+ 
+     for (i = 0; i < TX_RING_SIZE; i++) {
+-	tx_ring[i].status  = 0;			/* Owned by CPU */
+-	tx_ring[i].bufaddr = virt_to_bus(p + (PKT_BUF_SZ * i));
+-	tx_ring[i].control = TD_STDFLAGS;
+-	tx_ring[i].next    = virt_to_bus(&(tx_ring[i + 1]) );
++	tx_ring[i].status  = 0x0000;			/* Owned by CPU */
++    	tx_ring[i].buflength = 0x0000 | cpu_to_le32(TD_STDFLAGS << 16);
++	tx_ring[i].bufaddr = virt_to_bus(&tx_packet[i * PKT_BUF_SZ]);
++	tx_ring[i].next    = virt_to_le32desc(&tx_ring[i + 1]);
+     }
+-    tx_ring[i-1].next = virt_to_bus(&tx_ring[0]);
++	tx_ring[i-1].next    = virt_to_le32desc(&tx_ring[0]);
+ }
+ 
+ /* function: epic100_transmit
+@@ -296,7 +302,7 @@
+ 		 unsigned int len, const char *data)
+ {
+     unsigned short nstype;
+-    char* txp;
++    unsigned char *txp;
+     int entry;
+ 
+     /* Calculate the next Tx descriptor entry. */
+@@ -310,7 +316,7 @@
+ 	return;
+     }
+ 
+-    txp = (char*)tx_ring[entry].bufaddr;
++    txp = tx_packet + (entry * PKT_BUF_SZ);
+ 
+     memcpy(txp, destaddr, ETH_ALEN);
+     memcpy(txp + ETH_ALEN, nic->node_addr, ETH_ALEN);
+@@ -319,26 +325,29 @@
+     memcpy(txp + ETH_HLEN, data, len);
+ 
+     len += ETH_HLEN;
+-
++	len &= 0x0FFF;
++	while(len < ETH_ZLEN)
++		txp[len++] = '\0';
+     /*
+      * Caution: the write order is important here,
+      * set the base address with the "ownership"
+      * bits last.
+      */
+-    tx_ring[entry].txlength  = (len >= 60 ? len : 60);
+-    tx_ring[entry].buflength = len;
+-    tx_ring[entry].status    = TRING_OWN;	/* Pass ownership to the chip. */
++    
++    tx_ring[entry].buflength |= cpu_to_le32(len);
++    tx_ring[entry].status = cpu_to_le32(len << 16) | 
++	    cpu_to_le32(TRING_OWN);	/* Pass ownership to the chip. */
+ 
+     cur_tx++;
+ 
+     /* Trigger an immediate transmit demand. */
+-    outl(CR_QUEUE_TX, command);
+-
++    outl(CR_QUEUE_TX, command); 
++    
+     load_timer2(10*TICKS_PER_MS);         /* timeout 10 ms for transmit */
+-    while ((tx_ring[entry].status & TRING_OWN) && timer2_running())
++    while ((le32_to_cpu(tx_ring[entry].status) & (TRING_OWN)) && timer2_running())
+ 	/* Wait */;
+ 
+-    if ((tx_ring[entry].status & TRING_OWN) != 0)
++    if ((le32_to_cpu(tx_ring[entry].status) & TRING_OWN) != 0)
+ 	printf("Oops, transmitter timeout, status=%hX\n",
+ 	    tx_ring[entry].status);
+ }
+@@ -356,17 +365,19 @@
+  */
+ 
+     static int
+-epic100_poll(struct nic *nic)
++epic100_poll(struct nic *nic, int retrieve)
+ {
+     int entry;
+-    int status;
+     int retcode;
+-
++    int status;
+     entry = cur_rx % RX_RING_SIZE;
+ 
+-    if ((status = rx_ring[entry].status & RRING_OWN) == RRING_OWN)
++    if ((rx_ring[entry].status & cpu_to_le32(RRING_OWN)) == RRING_OWN)
+ 	return (0);
+ 
++    if ( ! retrieve ) return 1;
++
++    status = le32_to_cpu(rx_ring[entry].status);
+     /* We own the next entry, it's a new packet. Send it up. */
+ 
+ #if	(EPIC_DEBUG > 4)
+@@ -383,8 +394,8 @@
+ 	retcode = 0;
+     } else {
+ 	/* Omit the four octet CRC from the length. */
+-	nic->packetlen = rx_ring[entry].rxlength - 4;
+-	memcpy(nic->packet, (char*)rx_ring[entry].bufaddr, nic->packetlen);
++	nic->packetlen = le32_to_cpu((rx_ring[entry].buflength))- 4;
++	memcpy(nic->packet, &rx_packet[entry * PKT_BUF_SZ], nic->packetlen);
+ 	retcode = 1;
+     }
+ 
+@@ -395,17 +406,30 @@
+     rx_ring[entry].status = RRING_OWN;
+ 
+     /* Restart Receiver */
+-    outl(CR_START_RX | CR_QUEUE_RX, command);
++    outl(CR_START_RX | CR_QUEUE_RX, command); 
+ 
+     return retcode;
+ }
+ 
+ 
+     static void
+-epic100_disable(struct nic *nic)
++epic100_disable(struct dev *dev __unused)
+ {
++	/* Soft reset the chip. */
++	outl(GC_SOFT_RESET, genctl);
+ }
+ 
++static void epic100_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
+ 
+ #ifdef	DEBUG_EEPROM
+ /* Serial EEPROM section. */
+@@ -479,3 +503,18 @@
+ 	    break;
+     return inw(mmdata);
+ }
++
++
++static struct pci_id epic100_nics[] = {
++PCI_ROM(0x10b8, 0x0005, "epic100",    "SMC EtherPowerII"),		/* SMC 83c170 EPIC/100 */
++PCI_ROM(0x10b8, 0x0006, "smc-83c175", "SMC EPIC/C 83c175"),
++};
++
++struct pci_driver epic100_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "EPIC100",
++	.probe    = epic100_probe,
++	.ids      = epic100_nics,
++	.id_count = sizeof(epic100_nics)/sizeof(epic100_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/etherboot.h grub-0.97/netboot/etherboot.h
+--- grub-0.97.orig/netboot/etherboot.h	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/etherboot.h	2005-08-31 19:03:35.000000000 +0000
+@@ -1,6 +1,6 @@
+ /*
+  *  GRUB  --  GRand Unified Bootloader
+- *  Copyright (C) 2000,2001,2002  Free Software Foundation, Inc.
++ *  Copyright (C) 1999,2000,2001,2002,2003,2004  Free Software Foundation, Inc.
+  *
+  *  This program is free software; you can redistribute it and/or modify
+  *  it under the terms of the GNU General Public License as published by
+@@ -17,531 +17,45 @@
+  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  */
+ 
+-/* RULE: You must define the macro ``GRUB'' when including this header
+-   file in GRUB code.  */
+-
+-/* Based on "src/etherboot.h" in etherboot-5.0.5.  */
+-
+-/**************************************************************************
+-ETHERBOOT -  BOOTP/TFTP Bootstrap Program
+-
+-Author: Martin Renters
+-  Date: Dec/93
+-
+-**************************************************************************/
+-
+-/* Include GRUB-specific macros and prototypes here.  */
+-#include <shared.h>
+-
+-/* FIXME: For now, enable the DHCP support. Perhaps I should segregate
+-   the DHCP support from the BOOTP support, and permit both to
+-   co-exist.  */
+-#undef NO_DHCP_SUPPORT
+-
+-/* In GRUB, the relocated address in Etherboot doesn't have any sense.
+-   Just define it as a bogus value.  */
+-#define RELOC	0
+-
+-/* FIXME: Should be an option.  */
+-#define BACKOFF_LIMIT	7
+-
+-#include <osdep.h>
+-
+-#define CTRL_C		3
+-
+-#ifndef	MAX_TFTP_RETRIES
+-# define MAX_TFTP_RETRIES	20
+-#endif
+-
+-#ifndef	MAX_BOOTP_RETRIES
+-# define MAX_BOOTP_RETRIES	20
+-#endif
+-
+-#define MAX_BOOTP_EXTLEN	(ETH_FRAME_LEN - ETH_HLEN - \
+-				 sizeof (struct bootp_t))
++/* 
++ * Transport layer to use Etherboot NIC drivers in GRUB.
++ */
+ 
+-#ifndef	MAX_ARP_RETRIES
+-# define MAX_ARP_RETRIES	20
+-#endif
++#ifndef ETHERBOOT_H
++#define ETHERBOOT_H
+ 
+-#ifndef	MAX_RPC_RETRIES
+-# define MAX_RPC_RETRIES	20
++#include "shared.h"
++#include "osdep.h"
++#include "if_ether.h"
++#include "in.h"
++
++/* Link configuration time in tenths of a second */
++#ifndef VALID_LINK_TIMEOUT
++#define VALID_LINK_TIMEOUT	100 /* 10.0 seconds */
+ #endif
+ 
+-#define	TICKS_PER_SEC		18
+-
+-/* Inter-packet retry in ticks */
+-#define TIMEOUT			(10 * TICKS_PER_SEC)
+-
+-/* These settings have sense only if compiled with -DCONGESTED */
+-/* total retransmission timeout in ticks */
+-#define TFTP_TIMEOUT		(30 * TICKS_PER_SEC)
+-/* packet retransmission timeout in ticks */
+-#define TFTP_REXMT		(3 * TICKS_PER_SEC)
+-
+ #ifndef	NULL
+-# define NULL			((void *) 0)
++#define NULL	((void *)0)
+ #endif
+ 
+-/*
+-   I'm moving towards the defined names in linux/if_ether.h for clarity.
+-   The confusion between 60/64 and 1514/1518 arose because the NS8390
+-   counts the 4 byte frame checksum in the incoming packet, but not
+-   in the outgoing packet. 60/1514 are the correct numbers for most
+-   if not all of the other NIC controllers. I will be retiring the
+-   64/1518 defines in the lead-up to 5.0.
+-*/
+-
+-#define ETH_ALEN		6	/* Size of Ethernet address */
+-#define ETH_HLEN		14	/* Size of ethernet header */
+-#define	ETH_ZLEN		60	/* Minimum packet */
+-/*#define ETH_MIN_PACKET		64*/
+-#define	ETH_FRAME_LEN		1514	/* Maximum packet */
+-/*#define ETH_MAX_PACKET		1518*/
+-/* Because some DHCP/BOOTP servers don't treat the maximum length the same
+-   as Etherboot, subtract the size of an IP header and that of an UDP
+-   header.  */
+-#define	ETH_MAX_MTU		(ETH_FRAME_LEN - ETH_HLEN \
+-				- sizeof (struct iphdr) \
+-				- sizeof (struct udphdr))
+-
+-#define ARP_CLIENT	0
+-#define ARP_SERVER	1
+-#define ARP_GATEWAY	2
+-#define ARP_ROOTSERVER	3
+-#define ARP_SWAPSERVER	4
+-#define MAX_ARP		ARP_SWAPSERVER+1
+-
+-#define	RARP_REQUEST	3
+-#define	RARP_REPLY	4
+-
+-#define IP		0x0800
+-#define ARP		0x0806
+-#define	RARP		0x8035
+-
+-#define BOOTP_SERVER	67
+-#define BOOTP_CLIENT	68
+-#define TFTP_PORT	69
+-#define SUNRPC_PORT	111
+-
+-#define IP_UDP		17
+-/* Same after going through htonl */
+-#define IP_BROADCAST	0xFFFFFFFF
+-
+-#define ARP_REQUEST	1
+-#define ARP_REPLY	2
+-
+-#define BOOTP_REQUEST	1
+-#define BOOTP_REPLY	2
+-
+-#define TAG_LEN(p)		(*((p) + 1))
+-#define RFC1533_COOKIE		99, 130, 83, 99
+-#define RFC1533_PAD		0
+-#define RFC1533_NETMASK		1
+-#define RFC1533_TIMEOFFSET	2
+-#define RFC1533_GATEWAY		3
+-#define RFC1533_TIMESERVER	4
+-#define RFC1533_IEN116NS	5
+-#define RFC1533_DNS		6
+-#define RFC1533_LOGSERVER	7
+-#define RFC1533_COOKIESERVER	8
+-#define RFC1533_LPRSERVER	9
+-#define RFC1533_IMPRESSSERVER	10
+-#define RFC1533_RESOURCESERVER	11
+-#define RFC1533_HOSTNAME	12
+-#define RFC1533_BOOTFILESIZE	13
+-#define RFC1533_MERITDUMPFILE	14
+-#define RFC1533_DOMAINNAME	15
+-#define RFC1533_SWAPSERVER	16
+-#define RFC1533_ROOTPATH	17
+-#define RFC1533_EXTENSIONPATH	18
+-#define RFC1533_IPFORWARDING	19
+-#define RFC1533_IPSOURCEROUTING	20
+-#define RFC1533_IPPOLICYFILTER	21
+-#define RFC1533_IPMAXREASSEMBLY	22
+-#define RFC1533_IPTTL		23
+-#define RFC1533_IPMTU		24
+-#define RFC1533_IPMTUPLATEAU	25
+-#define RFC1533_INTMTU		26
+-#define RFC1533_INTLOCALSUBNETS	27
+-#define RFC1533_INTBROADCAST	28
+-#define RFC1533_INTICMPDISCOVER	29
+-#define RFC1533_INTICMPRESPOND	30
+-#define RFC1533_INTROUTEDISCOVER 31
+-#define RFC1533_INTROUTESOLICIT	32
+-#define RFC1533_INTSTATICROUTES	33
+-#define RFC1533_LLTRAILERENCAP	34
+-#define RFC1533_LLARPCACHETMO	35
+-#define RFC1533_LLETHERNETENCAP	36
+-#define RFC1533_TCPTTL		37
+-#define RFC1533_TCPKEEPALIVETMO	38
+-#define RFC1533_TCPKEEPALIVEGB	39
+-#define RFC1533_NISDOMAIN	40
+-#define RFC1533_NISSERVER	41
+-#define RFC1533_NTPSERVER	42
+-#define RFC1533_VENDOR		43
+-#define RFC1533_NBNS		44
+-#define RFC1533_NBDD		45
+-#define RFC1533_NBNT		46
+-#define RFC1533_NBSCOPE		47
+-#define RFC1533_XFS		48
+-#define RFC1533_XDM		49
+-#ifndef	NO_DHCP_SUPPORT
+-#define RFC2132_REQ_ADDR	50
+-#define RFC2132_MSG_TYPE	53
+-#define RFC2132_SRV_ID		54
+-#define RFC2132_PARAM_LIST	55
+-#define RFC2132_MAX_SIZE	57
+-#define RFC2132_VENDOR_CLASS_ID	60
+-
+-#define DHCPDISCOVER		1
+-#define DHCPOFFER		2
+-#define DHCPREQUEST		3
+-#define DHCPACK			5
+-#endif	/* NO_DHCP_SUPPORT */
+-
+-#define RFC1533_VENDOR_MAJOR	0
+-#define RFC1533_VENDOR_MINOR	0
+-
+-#define RFC1533_VENDOR_MAGIC	128
+-#define RFC1533_VENDOR_ADDPARM	129
+-#define RFC1533_VENDOR_MNUOPTS	160
+-#define RFC1533_VENDOR_SELECTION 176
+-#define RFC1533_VENDOR_MOTD	184
+-#define RFC1533_VENDOR_NUMOFMOTD 8
+-#define RFC1533_VENDOR_IMG	192
+-#define RFC1533_VENDOR_NUMOFIMG	16
+-
+-#define RFC1533_VENDOR_CONFIGFILE	150
+-
+-#define RFC1533_END		255
+-
+-#define BOOTP_VENDOR_LEN	64
+-#ifndef	NO_DHCP_SUPPORT
+-#define DHCP_OPT_LEN		312
+-#endif	/* NO_DHCP_SUPPORT */
+-
+-#define	TFTP_DEFAULTSIZE_PACKET	512
+-#define	TFTP_MAX_PACKET		1432 /* 512 */
+-
+-#define TFTP_RRQ	1
+-#define TFTP_WRQ	2
+-#define TFTP_DATA	3
+-#define TFTP_ACK	4
+-#define TFTP_ERROR	5
+-#define TFTP_OACK	6
+-
+-#define TFTP_CODE_EOF	1
+-#define TFTP_CODE_MORE	2
+-#define TFTP_CODE_ERROR	3
+-#define TFTP_CODE_BOOT	4
+-#define TFTP_CODE_CFG	5
+-
+-#define AWAIT_ARP	0
+-#define AWAIT_BOOTP	1
+-#define AWAIT_TFTP	2
+-#define AWAIT_RARP	3
+-#define AWAIT_RPC	4
+-#define AWAIT_QDRAIN	5	/* drain queue, process ARP requests */
+-
+-typedef struct
+-{
+-  unsigned long	s_addr;
+-}
+-in_addr;
+-
+-struct arptable_t
+-{
+-  in_addr ipaddr;
+-  unsigned char node[6];
+-};
+-
+-/*
+- * A pity sipaddr and tipaddr are not longword aligned or we could use
+- * in_addr. No, I don't want to use #pragma packed.
+- */
+-struct arprequest
+-{
+-  unsigned short hwtype;
+-  unsigned short protocol;
+-  char hwlen;
+-  char protolen;
+-  unsigned short opcode;
+-  char shwaddr[6];
+-  char sipaddr[4];
+-  char thwaddr[6];
+-  char tipaddr[4];
+-};
+-
+-struct iphdr
+-{
+-  char verhdrlen;
+-  char service;
+-  unsigned short len;
+-  unsigned short ident;
+-  unsigned short frags;
+-  char ttl;
+-  char protocol;
+-  unsigned short chksum;
+-  in_addr src;
+-  in_addr dest;
+-};
+-
+-struct udphdr
+-{
+-  unsigned short src;
+-  unsigned short dest;
+-  unsigned short len;
+-  unsigned short chksum;
+-};
+-
+-/* Format of a bootp packet.  */
+-struct bootp_t
+-{
+-  char bp_op;
+-  char bp_htype;
+-  char bp_hlen;
+-  char bp_hops;
+-  unsigned long bp_xid;
+-  unsigned short bp_secs;
+-  unsigned short unused;
+-  in_addr bp_ciaddr;
+-  in_addr bp_yiaddr;
+-  in_addr bp_siaddr;
+-  in_addr bp_giaddr;
+-  char bp_hwaddr[16];
+-  char bp_sname[64];
+-  char bp_file[128];
+-#ifdef	NO_DHCP_SUPPORT
+-  char bp_vend[BOOTP_VENDOR_LEN];
+-#else
+-  char bp_vend[DHCP_OPT_LEN];
+-#endif	/* NO_DHCP_SUPPORT */
+-};
+-
+-/* Format of a bootp IP packet.  */
+-struct bootpip_t
+-{
+-  struct iphdr ip;
+-  struct udphdr udp;
+-  struct bootp_t bp;
+-};
+-
+-/* Format of bootp packet with extensions.  */
+-struct bootpd_t
+-{
+-  struct bootp_t bootp_reply;
+-  unsigned char  bootp_extension[MAX_BOOTP_EXTLEN];
+-};
+-
+-struct tftp_t
+-{
+-  struct iphdr ip;
+-  struct udphdr udp;
+-  unsigned short opcode;
+-  union
+-  {
+-    char rrq[TFTP_DEFAULTSIZE_PACKET];
+-    
+-    struct
+-    {
+-      unsigned short block;
+-      char download[TFTP_MAX_PACKET];
+-    }
+-    data;
+-    
+-    struct
+-    {
+-      unsigned short block;
+-    }
+-    ack;
+-    
+-    struct
+-    {
+-      unsigned short errcode;
+-      char errmsg[TFTP_DEFAULTSIZE_PACKET];
+-    }
+-    err;
+-    
+-    struct
+-    {
+-      char data[TFTP_DEFAULTSIZE_PACKET+2];
+-    }
+-    oack;
+-  }
+-  u;
+-};
+-
+-/* Define a smaller tftp packet solely for making requests to conserve stack
+-   512 bytes should be enough.  */
+-struct tftpreq_t
+-{
+-  struct iphdr ip;
+-  struct udphdr udp;
+-  unsigned short opcode;
+-  union
+-  {
+-    char rrq[512];
+-    
+-    struct
+-    {
+-      unsigned short block;
+-    }
+-    ack;
+-    
+-    struct
+-    {
+-      unsigned short errcode;
+-      char errmsg[512-2];
+-    }
+-    err;
+-  }
+-  u;
+-};
+-
+-#define TFTP_MIN_PACKET	(sizeof(struct iphdr) + sizeof(struct udphdr) + 4)
+-
+-struct rpc_t
+-{
+-  struct iphdr ip;
+-  struct udphdr udp;
+-  union
+-  {
+-    char data[300];		/* longest RPC call must fit!!!! */
+-    
+-    struct
+-    {
+-      long id;
+-      long type;
+-      long rpcvers;
+-      long prog;
+-      long vers;
+-      long proc;
+-      long data[1];
+-    }
+-    call;
+-    
+-    struct
+-    {
+-      long id;
+-      long type;
+-      long rstatus;
+-      long verifier;
+-      long v2;
+-      long astatus;
+-      long data[1];
+-    }
+-    reply;
+-  }
+-  u;
+-};
+-
+-#define PROG_PORTMAP	100000
+-#define PROG_NFS	100003
+-#define PROG_MOUNT	100005
+-
+-#define MSG_CALL	0
+-#define MSG_REPLY	1
+-
+-#define PORTMAP_GETPORT	3
+-
+-#define MOUNT_ADDENTRY	1
+-#define MOUNT_UMOUNTALL	4
+-
+-#define NFS_LOOKUP	4
+-#define NFS_READ	6
+-
+-#define NFS_FHSIZE	32
+-
+-#define NFSERR_PERM	1
+-#define NFSERR_NOENT	2
+-#define NFSERR_ACCES	13
+-
+-/* Block size used for NFS read accesses.  A RPC reply packet (including  all
+- * headers) must fit within a single Ethernet frame to avoid fragmentation.
+- * Chosen to be a power of two, as most NFS servers are optimized for this.  */
+-#define NFS_READ_SIZE	1024
+-
+-#define	FLOPPY_BOOT_LOCATION	0x7c00
+-/* Must match offsets in loader.S */
+-#define ROM_SEGMENT		0x1fa
+-#define ROM_LENGTH		0x1fc
+-
+-#define	ROM_INFO_LOCATION	(FLOPPY_BOOT_LOCATION + ROM_SEGMENT)
+-/* at end of floppy boot block */
+-
+-struct rom_info
+-{
+-  unsigned short	rom_segment;
+-  unsigned short	rom_length;
+-};
+-
+-static inline int
+-rom_address_ok (struct rom_info *rom, int assigned_rom_segment)
+-{
+-  return (assigned_rom_segment < 0xC000
+-	  || assigned_rom_segment == rom->rom_segment);
+-}
+-
+-/* Define a type for passing info to a loaded program.  */
+-struct ebinfo
+-{
+-  unsigned char	major, minor;	/* Version */
+-  unsigned short	flags;		/* Bit flags */
+-};
+-
+-/***************************************************************************
+-External prototypes
+-***************************************************************************/
+-/* main.c */
+-extern void print_network_configuration (void);
+-extern int ifconfig (char *ip, char *sm, char *gw, char *svr);
+-extern int udp_transmit (unsigned long destip, unsigned int srcsock,
+-			 unsigned int destsock, int len, const void *buf);
+-extern int await_reply (int type, int ival, void *ptr, int timeout);
+-extern int decode_rfc1533 (unsigned char *, int, int, int);
+-extern long rfc2131_sleep_interval (int base, int exp);
+-extern void cleanup (void);
+-extern int rarp (void);
+-extern int bootp (void);
+-extern void cleanup_net (void);
+-
+-/* config.c */
+-extern void print_config (void);
+-extern void eth_reset (void);
+-extern int eth_probe (void);
+-extern int eth_poll (void);
+-extern void eth_transmit (const char *d, unsigned int t,
+-			  unsigned int s, const void *p);
+-extern void eth_disable (void);
+-
+-/* misc.c */
+-extern void twiddle (void);
+-extern void sleep (int secs);
+-extern int getdec (char **s);
+-extern void etherboot_printf (const char *, ...);
+-extern int etherboot_sprintf (char *, const char *, ...);
+-extern int inet_aton (char *p, in_addr *i);
+-
+-/***************************************************************************
+-External variables
+-***************************************************************************/
+-/* main.c */
+-extern int ip_abort;
+-extern int network_ready;
+-extern struct rom_info rom;
+-extern struct arptable_t arptable[MAX_ARP];
+-extern struct bootpd_t bootp_data;
+-#define	BOOTP_DATA_ADDR	(&bootp_data)
+-extern unsigned char *end_of_rfc1533;
+ 
+-/* config.c */
+-extern struct nic nic;
++#define gateA20_set() gateA20(1)
++#define gateA20_unset() gateA20(0)
++#define EBDEBUG 0
++/* The 'rom_info' maybe arch depended. It must be moved to some other
++ * place */
++struct rom_info {
++	unsigned short	rom_segment;
++	unsigned short	rom_length;
++};
++
++extern void poll_interruptions P((void));
++
++/* For UNDI drivers */
++extern void fake_irq ( uint8_t irq );
++extern void _trivial_irq_handler_start;
++extern uint32_t get_free_base_memory ( void );
++extern void forget_base_memory ( void*, size_t );
++extern void free_unused_base_memory ( void );
+ 
+-/* Local hack - define some macros to use etherboot source files "as is".  */
+-#ifndef GRUB
+-# undef printf
+-# define printf	etherboot_printf
+-# undef sprintf
+-# define sprintf etherboot_sprintf
+-#endif /* GRUB */
++#endif /* ETHERBOOT_H */
+diff -Naur grub-0.97.orig/netboot/fa311.c grub-0.97/netboot/fa311.c
+--- grub-0.97.orig/netboot/fa311.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/fa311.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,421 +0,0 @@
+-/*
+-        Driver for the National Semiconductor DP83810 Ethernet controller.
+-        
+-        Portions Copyright (C) 2001 Inprimis Technologies, Inc.
+-        http://www.inprimis.com/
+-        
+-        This driver is based (heavily) on the Linux driver for this chip 
+-        which is copyright 1999-2001 by Donald Becker.
+-
+-        This software has no warranties expressed or implied for any
+-        purpose.
+-
+-        This software may be used and distributed according to the terms of
+-        the GNU General Public License (GPL), incorporated herein by reference.
+-        Drivers based on or derived from this code fall under the GPL and must
+-        retain the authorship, copyright and license notice.  This file is not
+-        a complete program and may only be used when the entire operating
+-        system is licensed under the GPL.  License for under other terms may be
+-        available.  Contact the original author for details.
+-
+-        The original author may be reached as becker@scyld.com, or at
+-        Scyld Computing Corporation
+-        410 Severn Ave., Suite 210
+-        Annapolis MD 21403
+-*/
+-
+-
+-typedef unsigned char  u8;
+-typedef   signed char  s8;
+-typedef unsigned short u16;
+-typedef   signed short s16;
+-typedef unsigned int   u32;
+-typedef   signed int   s32;
+-
+-#include "etherboot.h"
+-#include "nic.h"
+-#include "pci.h"
+-
+-#undef	virt_to_bus
+-#define	virt_to_bus(x)          ((unsigned long)x)
+-#define cpu_to_le32(val)        (val)
+-#define le32_to_cpu(val)        (val)
+-#define virt_to_le32desc(addr)  cpu_to_le32(virt_to_bus(addr))
+-#define le32desc_to_virt(addr)  bus_to_virt(le32_to_cpu(addr))
+-
+-#define TX_RING_SIZE 1
+-#define RX_RING_SIZE 4
+-#define TIME_OUT     1000000
+-#define PKT_BUF_SZ   1536
+-
+-/* Offsets to the device registers. */
+-enum register_offsets {
+-    ChipCmd=0x00, ChipConfig=0x04, EECtrl=0x08, PCIBusCfg=0x0C,
+-    IntrStatus=0x10, IntrMask=0x14, IntrEnable=0x18,
+-    TxRingPtr=0x20, TxConfig=0x24,
+-    RxRingPtr=0x30, RxConfig=0x34,
+-    WOLCmd=0x40, PauseCmd=0x44, RxFilterAddr=0x48, RxFilterData=0x4C,
+-    BootRomAddr=0x50, BootRomData=0x54, StatsCtrl=0x5C, StatsData=0x60,
+-    RxPktErrs=0x60, RxMissed=0x68, RxCRCErrs=0x64,
+-};
+-
+-/* Bit in ChipCmd. */
+-enum ChipCmdBits {
+-    ChipReset=0x100, RxReset=0x20, TxReset=0x10, RxOff=0x08, RxOn=0x04,
+-    TxOff=0x02, TxOn=0x01,
+-};
+-
+-/* Bits in the interrupt status/mask registers. */
+-enum intr_status_bits {
+-    IntrRxDone=0x0001, IntrRxIntr=0x0002, IntrRxErr=0x0004, IntrRxEarly=0x0008,
+-    IntrRxIdle=0x0010, IntrRxOverrun=0x0020,
+-    IntrTxDone=0x0040, IntrTxIntr=0x0080, IntrTxErr=0x0100,
+-    IntrTxIdle=0x0200, IntrTxUnderrun=0x0400,
+-    StatsMax=0x0800, LinkChange=0x4000,	WOLPkt=0x2000,
+-    RxResetDone=0x1000000, TxResetDone=0x2000000,
+-    IntrPCIErr=0x00f00000, IntrNormalSummary=0x0251, IntrAbnormalSummary=0xED20,
+-};
+-
+-/* Bits in the RxMode register. */
+-enum rx_mode_bits {
+-    AcceptErr=0x20, AcceptRunt=0x10, AcceptBroadcast=0xC0000000,
+-    AcceptMulticast=0x00200000, AcceptAllMulticast=0x20000000,
+-    AcceptAllPhys=0x10000000, AcceptMyPhys=0x08000000,
+-};
+-
+-/* Bits in network_desc.status */
+-enum desc_status_bits {
+-    DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000,
+-    DescNoCRC=0x10000000,
+-    DescPktOK=0x08000000, RxTooLong=0x00400000,
+-};
+-
+-/* The Rx and Tx buffer descriptors. */
+-struct netdev_desc {
+-    u32 next_desc;
+-    s32 cmd_status;
+-    u32 addr;
+-};
+-
+-static struct FA311_DEV {
+-    unsigned int    ioaddr;
+-    unsigned short  vendor;
+-    unsigned short  device;
+-    unsigned int    cur_rx;
+-    unsigned int    cur_tx;
+-    unsigned int    rx_buf_sz;
+-    volatile struct netdev_desc *rx_head_desc;
+-    volatile struct netdev_desc rx_ring[RX_RING_SIZE] __attribute__ ((aligned (4)));
+-    volatile struct netdev_desc tx_ring[TX_RING_SIZE] __attribute__ ((aligned (4)));
+-} fa311_dev;
+-
+-static int  eeprom_read(long ioaddr, int location);
+-static void init_ring(struct FA311_DEV *dev);
+-static void fa311_reset(struct nic *nic);
+-static int  fa311_poll(struct nic *nic);
+-static void fa311_transmit(struct nic *nic, const char *d, unsigned int t, unsigned int s, const char *p);
+-static void fa311_disable(struct nic *nic);
+-
+-static char rx_packet[PKT_BUF_SZ * RX_RING_SIZE] __attribute__ ((aligned (4)));
+-static char tx_packet[PKT_BUF_SZ * TX_RING_SIZE] __attribute__ ((aligned (4)));
+-
+-struct nic * fa311_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci)
+-{
+-int            prev_eedata;
+-int            i;
+-int            duplex;
+-int            tx_config;
+-int            rx_config;
+-unsigned char  macaddr[6];
+-unsigned char  mactest;
+-unsigned char  pci_bus = 0;
+-struct FA311_DEV* dev = &fa311_dev;
+-	
+-    if (io_addrs == 0 || *io_addrs == 0)
+-        return (0);
+-    memset(dev, 0, sizeof(*dev));
+-    dev->vendor = pci->vendor;
+-    dev->device = pci->dev_id;
+-    dev->ioaddr = pci->membase;
+-
+-    /* Work around the dropped serial bit. */
+-    prev_eedata = eeprom_read(dev->ioaddr, 6);
+-    for (i = 0; i < 3; i++) {
+-        int eedata = eeprom_read(dev->ioaddr, i + 7);
+-        macaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
+-        macaddr[i*2+1] = eedata >> 7;
+-        prev_eedata = eedata;
+-    }
+-    mactest = 0;
+-    for (i = 0; i < 6; i++)
+-        mactest |= macaddr[i];
+-    if (mactest == 0)
+-        return (0);
+-    for (i = 0; i < 6; i++)
+-        nic->node_addr[i] = macaddr[i];
+-    printf("%! ", nic->node_addr);
+-
+-    adjust_pci_device(pci);
+-
+-    fa311_reset(nic);
+-
+-    nic->reset = fa311_reset;
+-    nic->disable = fa311_disable;
+-    nic->poll = fa311_poll;
+-    nic->transmit = fa311_transmit;
+-
+-    init_ring(dev);
+-
+-    writel(virt_to_bus(dev->rx_ring), dev->ioaddr + RxRingPtr);
+-    writel(virt_to_bus(dev->tx_ring), dev->ioaddr + TxRingPtr);
+-
+-    for (i = 0; i < 6; i += 2)
+-    {
+-        writel(i, dev->ioaddr + RxFilterAddr);
+-        writew(macaddr[i] + (macaddr[i+1] << 8),
+-               dev->ioaddr + RxFilterData);
+-    }
+-
+-    /* Initialize other registers. */
+-    /* Configure for standard, in-spec Ethernet. */
+-    if (readl(dev->ioaddr + ChipConfig) & 0x20000000)
+-    {    /* Full duplex */
+-        tx_config = 0xD0801002;
+-        rx_config = 0x10000020;
+-    }
+-    else
+-    {
+-        tx_config = 0x10801002;
+-        rx_config = 0x0020;
+-    }
+-    writel(tx_config, dev->ioaddr + TxConfig);
+-    writel(rx_config, dev->ioaddr + RxConfig);
+-
+-    duplex = readl(dev->ioaddr + ChipConfig) & 0x20000000 ? 1 : 0;
+-    if (duplex) {
+-        rx_config |= 0x10000000;
+-        tx_config |= 0xC0000000;
+-    } else {
+-        rx_config &= ~0x10000000;
+-        tx_config &= ~0xC0000000;
+-    }
+-    writew(tx_config, dev->ioaddr + TxConfig);
+-    writew(rx_config, dev->ioaddr + RxConfig);
+-
+-    writel(AcceptBroadcast | AcceptAllMulticast | AcceptMyPhys, 
+-           dev->ioaddr + RxFilterAddr);
+-
+-    writel(RxOn | TxOn, dev->ioaddr + ChipCmd);
+-    writel(4, dev->ioaddr + StatsCtrl);              /* Clear Stats */
+-    return nic;	
+-
+-}
+-
+-static void fa311_reset(struct nic *nic)
+-{
+-u32 chip_config;
+-struct FA311_DEV* dev = &fa311_dev;
+-
+-    /* Reset the chip to erase previous misconfiguration. */
+-    outl(ChipReset, dev->ioaddr + ChipCmd);
+-
+-    if ((readl(dev->ioaddr + ChipConfig) & 0xe000) != 0xe000)
+-    {
+-        chip_config = readl(dev->ioaddr + ChipConfig);
+-    }
+-}
+-
+-static int fa311_poll(struct nic *nic)
+-{
+-s32 desc_status;
+-int to;
+-int entry;
+-int retcode;
+-struct FA311_DEV* dev = &fa311_dev;
+-
+-    retcode = 0;
+-    entry = dev->cur_rx;
+-    to = TIME_OUT;
+-    while (to != 0)
+-    {
+-        desc_status = dev->rx_ring[entry].cmd_status;
+-        if ((desc_status & DescOwn) != 0)
+-            break;
+-        else
+-            --to;
+-    }
+-    if (to != 0)
+-    {
+-        readl(dev->ioaddr + IntrStatus);         /* clear interrrupt bits */
+-        /* driver owns the next entry it's a new packet. Send it up. */
+-        if ((desc_status & (DescMore|DescPktOK|RxTooLong)) == DescPktOK)
+-        {
+-            nic->packetlen = (desc_status & 0x0fff) - 4;    /* Omit CRC size. */
+-            memcpy(nic->packet, (char*)(dev->rx_ring[entry].addr), nic->packetlen);
+-            retcode = 1;
+-        }
+-        /* Give the descriptor back to the chip */
+-        dev->rx_ring[entry].cmd_status = cpu_to_le32(dev->rx_buf_sz);
+-        dev->cur_rx++;
+-        if (dev->cur_rx >= RX_RING_SIZE)
+-            dev->cur_rx = 0;
+-        dev->rx_head_desc = &dev->rx_ring[dev->cur_rx];
+-    }
+-    /* Restart Rx engine if stopped. */
+-    writel(RxOn, dev->ioaddr + ChipCmd);
+-    return retcode;
+-}
+-
+-static void fa311_transmit(struct nic *nic, const char *destaddr, unsigned int type, unsigned int len, const char *data)
+-{
+-unsigned short nstype;
+-s32            desc_status;
+-int            to;
+-int            entry;
+-char*          txp;
+-unsigned char* s;
+-struct FA311_DEV* dev = &fa311_dev;
+-
+-    /* Calculate the next Tx descriptor entry. */
+-    entry = dev->cur_tx;
+-    txp = (char*)(dev->tx_ring[entry].addr);
+-
+-    memcpy(txp, destaddr, ETH_ALEN);
+-    memcpy(txp + ETH_ALEN, nic->node_addr, ETH_ALEN);
+-    nstype = htons(type);
+-    memcpy(txp + 12, (char*)&nstype, 2);
+-    memcpy(txp + ETH_HLEN, data, len);
+-    len += ETH_HLEN;
+-    /* pad frame */
+-    if (len <  ETH_ZLEN)
+-    {
+-        s = (unsigned char*)(txp+len);
+-        while (s < (unsigned char*)(txp+ETH_ZLEN))
+-            *s++ = 0;
+-        len = ETH_ZLEN;
+-    }
+-    dev->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | len);
+-    dev->cur_tx++;
+-    if (dev->cur_tx >= TX_RING_SIZE)
+-        dev->cur_tx = 0;
+-
+-    /* Wake the potentially-idle transmit channel. */
+-    writel(TxOn, dev->ioaddr + ChipCmd);
+-
+-    /* wait for tranmission to complete */
+-    to = TIME_OUT;
+-    while (to != 0)
+-    {
+-        desc_status = dev->tx_ring[entry].cmd_status;
+-        if ((desc_status & DescOwn) == 0)
+-            break;
+-        else
+-            --to;
+-    }
+-
+-    readl(dev->ioaddr + IntrStatus);         /* clear interrrupt bits */
+-    return;
+-}
+-
+-static void fa311_disable(struct nic *nic)
+-{
+-struct FA311_DEV* dev = &fa311_dev;
+-
+-    /* Stop the chip's Tx and Rx processes. */
+-    writel(RxOff | TxOff, dev->ioaddr + ChipCmd);
+-}
+-
+-
+-/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+-   The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */
+-
+-/* Delay between EEPROM clock transitions.
+-   No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
+-   a delay.  Note that pre-2.0.34 kernels had a cache-alignment bug that
+-   made udelay() unreliable.
+-   The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
+-   depricated.
+-*/
+-#define eeprom_delay(ee_addr)	inl(ee_addr)
+-
+-enum EEPROM_Ctrl_Bits {
+-	EE_ShiftClk=0x04, EE_DataIn=0x01, EE_ChipSelect=0x08, EE_DataOut=0x02,
+-};
+-#define EE_Write0 (EE_ChipSelect)
+-#define EE_Write1 (EE_ChipSelect | EE_DataIn)
+-
+-/* The EEPROM commands include the alway-set leading bit. */
+-enum EEPROM_Cmds {
+-	EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+-};
+-
+-
+-static int eeprom_read(long addr, int location)
+-{
+-	int i;
+-	int retval = 0;
+-	int ee_addr = addr + EECtrl;
+-	int read_cmd = location | EE_ReadCmd;
+-	writel(EE_Write0, ee_addr);
+-
+-	/* Shift the read command bits out. */
+-	for (i = 10; i >= 0; i--) {
+-		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+-		writel(dataval, ee_addr);
+-		eeprom_delay(ee_addr);
+-		writel(dataval | EE_ShiftClk, ee_addr);
+-		eeprom_delay(ee_addr);
+-	}
+-	writel(EE_ChipSelect, ee_addr);
+-	eeprom_delay(ee_addr);
+-
+-	for (i = 0; i < 16; i++) {
+-		writel(EE_ChipSelect | EE_ShiftClk, ee_addr);
+-		eeprom_delay(ee_addr);
+-		retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0;
+-		writel(EE_ChipSelect, ee_addr);
+-		eeprom_delay(ee_addr);
+-	}
+-
+-	/* Terminate the EEPROM access. */
+-	writel(EE_Write0, ee_addr);
+-	writel(0, ee_addr);
+-	return retval;
+-}
+-
+-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+-static void init_ring(struct FA311_DEV *dev)
+-{
+-	int i;
+-
+-	dev->cur_rx = 0;
+-    dev->cur_tx = 0;
+-
+-	dev->rx_buf_sz = PKT_BUF_SZ;
+-	dev->rx_head_desc = &dev->rx_ring[0];
+-
+-	/* Initialize all Rx descriptors. */
+-	for (i = 0; i < RX_RING_SIZE; i++) {
+-		dev->rx_ring[i].next_desc = virt_to_le32desc(&dev->rx_ring[i+1]);
+-		dev->rx_ring[i].cmd_status = DescOwn;
+-	}
+-	/* Mark the last entry as wrapping the ring. */
+-	dev->rx_ring[i-1].next_desc = virt_to_le32desc(&dev->rx_ring[0]);
+-
+-	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+-	for (i = 0; i < RX_RING_SIZE; i++) {
+-		dev->rx_ring[i].addr = (u32)(&rx_packet[PKT_BUF_SZ * i]);
+-	    dev->rx_ring[i].cmd_status = cpu_to_le32(dev->rx_buf_sz);
+-	}
+-
+-	for (i = 0; i < TX_RING_SIZE; i++) {
+-		dev->tx_ring[i].next_desc = virt_to_le32desc(&dev->tx_ring[i+1]);
+-		dev->tx_ring[i].cmd_status = 0;
+-	}
+-	dev->tx_ring[i-1].next_desc = virt_to_le32desc(&dev->tx_ring[0]);
+-
+-	for (i = 0; i < TX_RING_SIZE; i++)
+-		dev->tx_ring[i].addr = (u32)(&tx_packet[PKT_BUF_SZ * i]);
+-	return;
+-}
+-
+diff -Naur grub-0.97.orig/netboot/forcedeth.c grub-0.97/netboot/forcedeth.c
+--- grub-0.97.orig/netboot/forcedeth.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/forcedeth.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,1039 @@
++/**************************************************************************
++*    forcedeth.c -- Etherboot device driver for the NVIDIA nForce 
++*			media access controllers.
++*
++* Note: This driver is based on the Linux driver that was based on
++*      a cleanroom reimplementation which was based on reverse
++*      engineered documentation written by Carl-Daniel Hailfinger
++*      and Andrew de Quincey. It's neither supported nor endorsed
++*      by NVIDIA Corp. Use at your own risk.
++*
++*    Written 2004 by Timothy Legge <tlegge@rogers.com>
++*
++*    This program is free software; you can redistribute it and/or modify
++*    it under the terms of the GNU General Public License as published by
++*    the Free Software Foundation; either version 2 of the License, or
++*    (at your option) any later version.
++*
++*    This program is distributed in the hope that it will be useful,
++*    but WITHOUT ANY WARRANTY; without even the implied warranty of
++*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++*    GNU General Public License for more details.
++*
++*    You should have received a copy of the GNU General Public License
++*    along with this program; if not, write to the Free Software
++*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*
++*    Portions of this code based on:
++*		forcedeth: Ethernet driver for NVIDIA nForce media access controllers:
++*
++*	(C) 2003 Manfred Spraul
++*		See Linux Driver for full information
++*	
++*	Linux Driver Version 0.22, 19 Jan 2004
++* 
++* 
++*    REVISION HISTORY:
++*    ================
++*    v1.0	01-31-2004	timlegge	Initial port of Linux driver
++*    v1.1	02-03-2004	timlegge	Large Clean up, first release 
++*    
++*    Indent Options: indent -kr -i8
++***************************************************************************/
++
++/* to get some global routines like printf */
++#include "etherboot.h"
++/* to get the interface to the body of the program */
++#include "nic.h"
++/* to get the PCI support functions, if this is a PCI NIC */
++#include "pci.h"
++/* Include timer support functions */
++#include "timer.h"
++
++#define drv_version "v1.1"
++#define drv_date "02-03-2004"
++
++//#define TFTM_DEBUG
++#ifdef TFTM_DEBUG
++#define dprintf(x) printf x
++#else
++#define dprintf(x)
++#endif
++
++typedef unsigned char u8;
++typedef signed char s8;
++typedef unsigned short u16;
++typedef signed short s16;
++typedef unsigned int u32;
++typedef signed int s32;
++
++/* Condensed operations for readability. */
++#define virt_to_le32desc(addr)  cpu_to_le32(virt_to_bus(addr))
++#define le32desc_to_virt(addr)  bus_to_virt(le32_to_cpu(addr))
++
++unsigned long BASE;
++/* NIC specific static variables go here */
++
++
++/*
++ * Hardware access:
++ */
++
++#define DEV_NEED_LASTPACKET1	0x0001
++#define DEV_IRQMASK_1		0x0002
++#define DEV_IRQMASK_2		0x0004
++#define DEV_NEED_TIMERIRQ	0x0008
++
++enum {
++	NvRegIrqStatus = 0x000,
++#define NVREG_IRQSTAT_MIIEVENT	0040
++#define NVREG_IRQSTAT_MASK		0x1ff
++	NvRegIrqMask = 0x004,
++#define NVREG_IRQ_RX			0x0002
++#define NVREG_IRQ_RX_NOBUF		0x0004
++#define NVREG_IRQ_TX_ERR		0x0008
++#define NVREG_IRQ_TX2			0x0010
++#define NVREG_IRQ_TIMER			0x0020
++#define NVREG_IRQ_LINK			0x0040
++#define NVREG_IRQ_TX1			0x0100
++#define NVREG_IRQMASK_WANTED_1		0x005f
++#define NVREG_IRQMASK_WANTED_2		0x0147
++#define NVREG_IRQ_UNKNOWN		(~(NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR|NVREG_IRQ_TX2|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX1))
++
++	NvRegUnknownSetupReg6 = 0x008,
++#define NVREG_UNKSETUP6_VAL		3
++
++/*
++ * NVREG_POLL_DEFAULT is the interval length of the timer source on the nic
++ * NVREG_POLL_DEFAULT=97 would result in an interval length of 1 ms
++ */
++	NvRegPollingInterval = 0x00c,
++#define NVREG_POLL_DEFAULT	970
++	NvRegMisc1 = 0x080,
++#define NVREG_MISC1_HD		0x02
++#define NVREG_MISC1_FORCE	0x3b0f3c
++
++	NvRegTransmitterControl = 0x084,
++#define NVREG_XMITCTL_START	0x01
++	NvRegTransmitterStatus = 0x088,
++#define NVREG_XMITSTAT_BUSY	0x01
++
++	NvRegPacketFilterFlags = 0x8c,
++#define NVREG_PFF_ALWAYS	0x7F0008
++#define NVREG_PFF_PROMISC	0x80
++#define NVREG_PFF_MYADDR	0x20
++
++	NvRegOffloadConfig = 0x90,
++#define NVREG_OFFLOAD_HOMEPHY	0x601
++#define NVREG_OFFLOAD_NORMAL	0x5ee
++	NvRegReceiverControl = 0x094,
++#define NVREG_RCVCTL_START	0x01
++	NvRegReceiverStatus = 0x98,
++#define NVREG_RCVSTAT_BUSY	0x01
++
++	NvRegRandomSeed = 0x9c,
++#define NVREG_RNDSEED_MASK	0x00ff
++#define NVREG_RNDSEED_FORCE	0x7f00
++
++	NvRegUnknownSetupReg1 = 0xA0,
++#define NVREG_UNKSETUP1_VAL	0x16070f
++	NvRegUnknownSetupReg2 = 0xA4,
++#define NVREG_UNKSETUP2_VAL	0x16
++	NvRegMacAddrA = 0xA8,
++	NvRegMacAddrB = 0xAC,
++	NvRegMulticastAddrA = 0xB0,
++#define NVREG_MCASTADDRA_FORCE	0x01
++	NvRegMulticastAddrB = 0xB4,
++	NvRegMulticastMaskA = 0xB8,
++	NvRegMulticastMaskB = 0xBC,
++
++	NvRegTxRingPhysAddr = 0x100,
++	NvRegRxRingPhysAddr = 0x104,
++	NvRegRingSizes = 0x108,
++#define NVREG_RINGSZ_TXSHIFT 0
++#define NVREG_RINGSZ_RXSHIFT 16
++	NvRegUnknownTransmitterReg = 0x10c,
++	NvRegLinkSpeed = 0x110,
++#define NVREG_LINKSPEED_FORCE 0x10000
++#define NVREG_LINKSPEED_10	10
++#define NVREG_LINKSPEED_100	100
++#define NVREG_LINKSPEED_1000	1000
++	NvRegUnknownSetupReg5 = 0x130,
++#define NVREG_UNKSETUP5_BIT31	(1<<31)
++	NvRegUnknownSetupReg3 = 0x134,
++#define NVREG_UNKSETUP3_VAL1	0x200010
++	NvRegTxRxControl = 0x144,
++#define NVREG_TXRXCTL_KICK	0x0001
++#define NVREG_TXRXCTL_BIT1	0x0002
++#define NVREG_TXRXCTL_BIT2	0x0004
++#define NVREG_TXRXCTL_IDLE	0x0008
++#define NVREG_TXRXCTL_RESET	0x0010
++	NvRegMIIStatus = 0x180,
++#define NVREG_MIISTAT_ERROR		0x0001
++#define NVREG_MIISTAT_LINKCHANGE	0x0008
++#define NVREG_MIISTAT_MASK		0x000f
++#define NVREG_MIISTAT_MASK2		0x000f
++	NvRegUnknownSetupReg4 = 0x184,
++#define NVREG_UNKSETUP4_VAL	8
++
++	NvRegAdapterControl = 0x188,
++#define NVREG_ADAPTCTL_START	0x02
++#define NVREG_ADAPTCTL_LINKUP	0x04
++#define NVREG_ADAPTCTL_PHYVALID	0x4000
++#define NVREG_ADAPTCTL_RUNNING	0x100000
++#define NVREG_ADAPTCTL_PHYSHIFT	24
++	NvRegMIISpeed = 0x18c,
++#define NVREG_MIISPEED_BIT8	(1<<8)
++#define NVREG_MIIDELAY	5
++	NvRegMIIControl = 0x190,
++#define NVREG_MIICTL_INUSE	0x10000
++#define NVREG_MIICTL_WRITE	0x08000
++#define NVREG_MIICTL_ADDRSHIFT	5
++	NvRegMIIData = 0x194,
++	NvRegWakeUpFlags = 0x200,
++#define NVREG_WAKEUPFLAGS_VAL		0x7770
++#define NVREG_WAKEUPFLAGS_BUSYSHIFT	24
++#define NVREG_WAKEUPFLAGS_ENABLESHIFT	16
++#define NVREG_WAKEUPFLAGS_D3SHIFT	12
++#define NVREG_WAKEUPFLAGS_D2SHIFT	8
++#define NVREG_WAKEUPFLAGS_D1SHIFT	4
++#define NVREG_WAKEUPFLAGS_D0SHIFT	0
++#define NVREG_WAKEUPFLAGS_ACCEPT_MAGPAT		0x01
++#define NVREG_WAKEUPFLAGS_ACCEPT_WAKEUPPAT	0x02
++#define NVREG_WAKEUPFLAGS_ACCEPT_LINKCHANGE	0x04
++
++	NvRegPatternCRC = 0x204,
++	NvRegPatternMask = 0x208,
++	NvRegPowerCap = 0x268,
++#define NVREG_POWERCAP_D3SUPP	(1<<30)
++#define NVREG_POWERCAP_D2SUPP	(1<<26)
++#define NVREG_POWERCAP_D1SUPP	(1<<25)
++	NvRegPowerState = 0x26c,
++#define NVREG_POWERSTATE_POWEREDUP	0x8000
++#define NVREG_POWERSTATE_VALID		0x0100
++#define NVREG_POWERSTATE_MASK		0x0003
++#define NVREG_POWERSTATE_D0		0x0000
++#define NVREG_POWERSTATE_D1		0x0001
++#define NVREG_POWERSTATE_D2		0x0002
++#define NVREG_POWERSTATE_D3		0x0003
++};
++
++
++
++#define NV_TX_LASTPACKET	(1<<0)
++#define NV_TX_RETRYERROR	(1<<3)
++#define NV_TX_LASTPACKET1	(1<<8)
++#define NV_TX_DEFERRED		(1<<10)
++#define NV_TX_CARRIERLOST	(1<<11)
++#define NV_TX_LATECOLLISION	(1<<12)
++#define NV_TX_UNDERFLOW		(1<<13)
++#define NV_TX_ERROR		(1<<14)
++#define NV_TX_VALID		(1<<15)
++
++#define NV_RX_DESCRIPTORVALID	(1<<0)
++#define NV_RX_MISSEDFRAME	(1<<1)
++#define NV_RX_SUBSTRACT1	(1<<3)
++#define NV_RX_ERROR1		(1<<7)
++#define NV_RX_ERROR2		(1<<8)
++#define NV_RX_ERROR3		(1<<9)
++#define NV_RX_ERROR4		(1<<10)
++#define NV_RX_CRCERR		(1<<11)
++#define NV_RX_OVERFLOW		(1<<12)
++#define NV_RX_FRAMINGERR	(1<<13)
++#define NV_RX_ERROR		(1<<14)
++#define NV_RX_AVAIL		(1<<15)
++
++/* Miscelaneous hardware related defines: */
++#define NV_PCI_REGSZ		0x270
++
++/* various timeout delays: all in usec */
++#define NV_TXRX_RESET_DELAY	4
++#define NV_TXSTOP_DELAY1	10
++#define NV_TXSTOP_DELAY1MAX	500000
++#define NV_TXSTOP_DELAY2	100
++#define NV_RXSTOP_DELAY1	10
++#define NV_RXSTOP_DELAY1MAX	500000
++#define NV_RXSTOP_DELAY2	100
++#define NV_SETUP5_DELAY		5
++#define NV_SETUP5_DELAYMAX	50000
++#define NV_POWERUP_DELAY	5
++#define NV_POWERUP_DELAYMAX	5000
++#define NV_MIIBUSY_DELAY	50
++#define NV_MIIPHY_DELAY	10
++#define NV_MIIPHY_DELAYMAX	10000
++
++#define NV_WAKEUPPATTERNS	5
++#define NV_WAKEUPMASKENTRIES	4
++
++/* General driver defaults */
++#define NV_WATCHDOG_TIMEO	(2*HZ)
++#define DEFAULT_MTU		1500	/* also maximum supported, at least for now */
++
++#define RX_RING		4
++#define TX_RING		2
++/* limited to 1 packet until we understand NV_TX_LASTPACKET */
++#define TX_LIMIT_STOP	10
++#define TX_LIMIT_START	5
++
++/* rx/tx mac addr + type + vlan + align + slack*/
++#define RX_NIC_BUFSIZE		(DEFAULT_MTU + 64)
++/* even more slack */
++#define RX_ALLOC_BUFSIZE	(DEFAULT_MTU + 128)
++
++#define OOM_REFILL	(1+HZ/20)
++#define POLL_WAIT	(1+HZ/100)
++
++struct ring_desc {
++	u32 PacketBuffer;
++	u16 Length;
++	u16 Flags;
++};
++
++
++/* Define the TX Descriptor */
++static struct ring_desc tx_ring[TX_RING];
++
++/* Create a static buffer of size RX_BUF_SZ for each
++TX Descriptor.  All descriptors point to a
++part of this buffer */
++static unsigned char txb[TX_RING * RX_NIC_BUFSIZE];
++
++/* Define the TX Descriptor */
++static struct ring_desc rx_ring[RX_RING];
++
++/* Create a static buffer of size RX_BUF_SZ for each
++RX Descriptor   All descriptors point to a
++part of this buffer */
++static unsigned char rxb[RX_RING * RX_NIC_BUFSIZE];
++
++/* Private Storage for the NIC */
++struct forcedeth_private {
++	/* General data:
++	 * Locking: spin_lock(&np->lock); */
++	int in_shutdown;
++	u32 linkspeed;
++	int duplex;
++	int phyaddr;
++
++	/* General data: RO fields */
++	u8 *ring_addr;
++	u32 orig_mac[2];
++	u32 irqmask;
++	/* rx specific fields.
++	 * Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
++	 */
++	struct ring_desc *rx_ring;
++	unsigned int cur_rx, refill_rx;
++	struct sk_buff *rx_skbuff[RX_RING];
++	u32 rx_dma[RX_RING];
++	unsigned int rx_buf_sz;
++
++	/*
++	 * tx specific fields.
++	 */
++	struct ring_desc *tx_ring;
++	unsigned int next_tx, nic_tx;
++	struct sk_buff *tx_skbuff[TX_RING];
++	u32 tx_dma[TX_RING];
++	u16 tx_flags;
++} npx;
++
++static struct forcedeth_private *np;
++
++static inline void pci_push(u8 * base)
++{
++	/* force out pending posted writes */
++	readl(base);
++}
++static int reg_delay(int offset, u32 mask,
++		     u32 target, int delay, int delaymax, const char *msg)
++{
++	u8 *base = (u8 *) BASE;
++
++	pci_push(base);
++	do {
++		udelay(delay);
++		delaymax -= delay;
++		if (delaymax < 0) {
++			if (msg)
++				printf(msg);
++			return 1;
++		}
++	} while ((readl(base + offset) & mask) != target);
++	return 0;
++}
++
++#define MII_READ	(-1)
++#define MII_PHYSID1         0x02	/* PHYS ID 1                   */
++#define MII_PHYSID2         0x03	/* PHYS ID 2                   */
++#define MII_BMCR            0x00	/* Basic mode control register */
++#define MII_BMSR            0x01	/* Basic mode status register  */
++#define MII_ADVERTISE       0x04	/* Advertisement control reg   */
++#define MII_LPA             0x05	/* Link partner ability reg    */
++
++#define BMSR_ANEGCOMPLETE       0x0020	/* Auto-negotiation complete   */
++
++/* Link partner ability register. */
++#define LPA_SLCT                0x001f	/* Same as advertise selector  */
++#define LPA_10HALF              0x0020	/* Can do 10mbps half-duplex   */
++#define LPA_10FULL              0x0040	/* Can do 10mbps full-duplex   */
++#define LPA_100HALF             0x0080	/* Can do 100mbps half-duplex  */
++#define LPA_100FULL             0x0100	/* Can do 100mbps full-duplex  */
++#define LPA_100BASE4            0x0200	/* Can do 100mbps 4k packets   */
++#define LPA_RESV                0x1c00	/* Unused...                   */
++#define LPA_RFAULT              0x2000	/* Link partner faulted        */
++#define LPA_LPACK               0x4000	/* Link partner acked us       */
++#define LPA_NPAGE               0x8000	/* Next page bit               */
++
++/* mii_rw: read/write a register on the PHY.
++ *
++ * Caller must guarantee serialization
++ */
++static int mii_rw(struct nic *nic __unused, int addr, int miireg,
++		  int value)
++{
++	u8 *base = (u8 *) BASE;
++	int was_running;
++	u32 reg;
++	int retval;
++
++	writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus);
++	was_running = 0;
++	reg = readl(base + NvRegAdapterControl);
++	if (reg & NVREG_ADAPTCTL_RUNNING) {
++		was_running = 1;
++		writel(reg & ~NVREG_ADAPTCTL_RUNNING,
++		       base + NvRegAdapterControl);
++	}
++	reg = readl(base + NvRegMIIControl);
++	if (reg & NVREG_MIICTL_INUSE) {
++		writel(NVREG_MIICTL_INUSE, base + NvRegMIIControl);
++		udelay(NV_MIIBUSY_DELAY);
++	}
++
++	reg =
++	    NVREG_MIICTL_INUSE | (addr << NVREG_MIICTL_ADDRSHIFT) | miireg;
++	if (value != MII_READ) {
++		writel(value, base + NvRegMIIData);
++		reg |= NVREG_MIICTL_WRITE;
++	}
++	writel(reg, base + NvRegMIIControl);
++
++	if (reg_delay(NvRegMIIControl, NVREG_MIICTL_INUSE, 0,
++		      NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX, NULL)) {
++		dprintf(("mii_rw of reg %d at PHY %d timed out.\n",
++			 miireg, addr));
++		retval = -1;
++	} else if (value != MII_READ) {
++		/* it was a write operation - fewer failures are detectable */
++		dprintf(("mii_rw wrote 0x%x to reg %d at PHY %d\n",
++			 value, miireg, addr));
++		retval = 0;
++	} else if (readl(base + NvRegMIIStatus) & NVREG_MIISTAT_ERROR) {
++		dprintf(("mii_rw of reg %d at PHY %d failed.\n",
++			 miireg, addr));
++		retval = -1;
++	} else {
++		/* FIXME: why is that required? */
++		udelay(50);
++		retval = readl(base + NvRegMIIData);
++		dprintf(("mii_rw read from reg %d at PHY %d: 0x%x.\n",
++			 miireg, addr, retval));
++	}
++	if (was_running) {
++		reg = readl(base + NvRegAdapterControl);
++		writel(reg | NVREG_ADAPTCTL_RUNNING,
++		       base + NvRegAdapterControl);
++	}
++	return retval;
++}
++
++static void start_rx(struct nic *nic __unused)
++{
++	u8 *base = (u8 *) BASE;
++
++	dprintf(("start_rx\n"));
++	/* Already running? Stop it. */
++	if (readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) {
++		writel(0, base + NvRegReceiverControl);
++		pci_push(base);
++	}
++	writel(np->linkspeed, base + NvRegLinkSpeed);
++	pci_push(base);
++	writel(NVREG_RCVCTL_START, base + NvRegReceiverControl);
++	pci_push(base);
++}
++
++static void stop_rx(void)
++{
++	u8 *base = (u8 *) BASE;
++
++	dprintf(("stop_rx\n"));
++	writel(0, base + NvRegReceiverControl);
++	reg_delay(NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
++		  NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX,
++		  "stop_rx: ReceiverStatus remained busy");
++
++	udelay(NV_RXSTOP_DELAY2);
++	writel(0, base + NvRegLinkSpeed);
++}
++
++static void start_tx(struct nic *nic __unused)
++{
++	u8 *base = (u8 *) BASE;
++
++	dprintf(("start_tx\n"));
++	writel(NVREG_XMITCTL_START, base + NvRegTransmitterControl);
++	pci_push(base);
++}
++
++static void stop_tx(void)
++{
++	u8 *base = (u8 *) BASE;
++
++	dprintf(("stop_tx\n"));
++	writel(0, base + NvRegTransmitterControl);
++	reg_delay(NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
++		  NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX,
++		  "stop_tx: TransmitterStatus remained busy");
++
++	udelay(NV_TXSTOP_DELAY2);
++	writel(0, base + NvRegUnknownTransmitterReg);
++}
++
++
++static void txrx_reset(struct nic *nic __unused)
++{
++	u8 *base = (u8 *) BASE;
++
++	dprintf(("txrx_reset\n"));
++	writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET,
++	       base + NvRegTxRxControl);
++	pci_push(base);
++	udelay(NV_TXRX_RESET_DELAY);
++	writel(NVREG_TXRXCTL_BIT2, base + NvRegTxRxControl);
++	pci_push(base);
++}
++
++/*
++ * alloc_rx: fill rx ring entries.
++ * Return 1 if the allocations for the skbs failed and the
++ * rx engine is without Available descriptors
++ */
++static int alloc_rx(struct nic *nic __unused)
++{
++	unsigned int refill_rx = np->refill_rx;
++	int i;
++	//while (np->cur_rx != refill_rx) {
++	for (i = 0; i < RX_RING; i++) {
++		//int nr = refill_rx % RX_RING;
++		rx_ring[i].PacketBuffer =
++		    virt_to_le32desc(&rxb[i * RX_NIC_BUFSIZE]);
++		rx_ring[i].Length = cpu_to_le16(RX_NIC_BUFSIZE);
++		wmb();
++		rx_ring[i].Flags = cpu_to_le16(NV_RX_AVAIL);
++		/*      printf("alloc_rx: Packet  %d marked as Available\n",
++		   refill_rx); */
++		refill_rx++;
++	}
++	np->refill_rx = refill_rx;
++	if (np->cur_rx - refill_rx == RX_RING)
++		return 1;
++	return 0;
++}
++
++static int update_linkspeed(struct nic *nic)
++{
++	int adv, lpa, newdup;
++	u32 newls;
++	adv = mii_rw(nic, np->phyaddr, MII_ADVERTISE, MII_READ);
++	lpa = mii_rw(nic, np->phyaddr, MII_LPA, MII_READ);
++	dprintf(("update_linkspeed: PHY advertises 0x%hX, lpa 0x%hX.\n",
++		 adv, lpa));
++
++	/* FIXME: handle parallel detection properly, handle gigabit ethernet */
++	lpa = lpa & adv;
++	if (lpa & LPA_100FULL) {
++		newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_100;
++		newdup = 1;
++	} else if (lpa & LPA_100HALF) {
++		newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_100;
++		newdup = 0;
++	} else if (lpa & LPA_10FULL) {
++		newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
++		newdup = 1;
++	} else if (lpa & LPA_10HALF) {
++		newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
++		newdup = 0;
++	} else {
++		printf("bad ability %hX - falling back to 10HD.\n", lpa);
++		newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
++		newdup = 0;
++	}
++	if (np->duplex != newdup || np->linkspeed != newls) {
++		np->duplex = newdup;
++		np->linkspeed = newls;
++		return 1;
++	}
++	return 0;
++}
++
++
++
++static int init_ring(struct nic *nic)
++{
++	int i;
++
++	np->next_tx = np->nic_tx = 0;
++	for (i = 0; i < TX_RING; i++) {
++		tx_ring[i].Flags = 0;
++	}
++
++	np->cur_rx = 0;
++	np->refill_rx = 0;
++	for (i = 0; i < RX_RING; i++) {
++		rx_ring[i].Flags = 0;
++	}
++	return alloc_rx(nic);
++}
++
++static void set_multicast(struct nic *nic)
++{
++
++	u8 *base = (u8 *) BASE;
++	u32 addr[2];
++	u32 mask[2];
++	u32 pff;
++	u32 alwaysOff[2];
++	u32 alwaysOn[2];
++
++	memset(addr, 0, sizeof(addr));
++	memset(mask, 0, sizeof(mask));
++
++	pff = NVREG_PFF_MYADDR;
++
++	alwaysOn[0] = alwaysOn[1] = alwaysOff[0] = alwaysOff[1] = 0;
++
++	addr[0] = alwaysOn[0];
++	addr[1] = alwaysOn[1];
++	mask[0] = alwaysOn[0] | alwaysOff[0];
++	mask[1] = alwaysOn[1] | alwaysOff[1];
++
++	addr[0] |= NVREG_MCASTADDRA_FORCE;
++	pff |= NVREG_PFF_ALWAYS;
++	stop_rx();
++	writel(addr[0], base + NvRegMulticastAddrA);
++	writel(addr[1], base + NvRegMulticastAddrB);
++	writel(mask[0], base + NvRegMulticastMaskA);
++	writel(mask[1], base + NvRegMulticastMaskB);
++	writel(pff, base + NvRegPacketFilterFlags);
++	start_rx(nic);
++}
++
++/**************************************************************************
++RESET - Reset the NIC to prepare for use
++***************************************************************************/
++static int forcedeth_reset(struct nic *nic)
++{
++	u8 *base = (u8 *) BASE;
++	int ret, oom, i;
++	ret = 0;
++	dprintf(("forcedeth: open\n"));
++
++	/* 1) erase previous misconfiguration */
++	/* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
++	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
++	writel(0, base + NvRegMulticastAddrB);
++	writel(0, base + NvRegMulticastMaskA);
++	writel(0, base + NvRegMulticastMaskB);
++	writel(0, base + NvRegPacketFilterFlags);
++	writel(0, base + NvRegAdapterControl);
++	writel(0, base + NvRegLinkSpeed);
++	writel(0, base + NvRegUnknownTransmitterReg);
++	txrx_reset(nic);
++	writel(0, base + NvRegUnknownSetupReg6);
++
++	/* 2) initialize descriptor rings */
++	np->in_shutdown = 0;
++	oom = init_ring(nic);
++
++	/* 3) set mac address */
++	{
++		u32 mac[2];
++
++		mac[0] =
++		    (nic->node_addr[0] << 0) + (nic->node_addr[1] << 8) +
++		    (nic->node_addr[2] << 16) + (nic->node_addr[3] << 24);
++		mac[1] =
++		    (nic->node_addr[4] << 0) + (nic->node_addr[5] << 8);
++
++		writel(mac[0], base + NvRegMacAddrA);
++		writel(mac[1], base + NvRegMacAddrB);
++	}
++
++	/* 4) continue setup */
++	np->linkspeed = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
++	np->duplex = 0;
++	writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
++	writel(0, base + NvRegTxRxControl);
++	pci_push(base);
++	writel(NVREG_TXRXCTL_BIT1, base + NvRegTxRxControl);
++
++	reg_delay(NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31,
++		  NVREG_UNKSETUP5_BIT31, NV_SETUP5_DELAY,
++		  NV_SETUP5_DELAYMAX,
++		  "open: SetupReg5, Bit 31 remained off\n");
++	writel(0, base + NvRegUnknownSetupReg4);
++
++	/* 5) Find a suitable PHY */
++	writel(NVREG_MIISPEED_BIT8 | NVREG_MIIDELAY, base + NvRegMIISpeed);
++	for (i = 1; i < 32; i++) {
++		int id1, id2;
++
++		id1 = mii_rw(nic, i, MII_PHYSID1, MII_READ);
++		if (id1 < 0)
++			continue;
++		id2 = mii_rw(nic, i, MII_PHYSID2, MII_READ);
++		if (id2 < 0)
++			continue;
++		dprintf(("open: Found PHY %04x:%04x at address %d.\n",
++			 id1, id2, i));
++		np->phyaddr = i;
++
++		update_linkspeed(nic);
++
++		break;
++	}
++	if (i == 32) {
++		printf("open: failing due to lack of suitable PHY.\n");
++		ret = -1;
++		goto out_drain;
++	}
++
++	printf("%d-Mbs Link, %s-Duplex\n",
++	       np->linkspeed & NVREG_LINKSPEED_10 ? 10 : 100,
++	       np->duplex ? "Full" : "Half");
++	/* 6) continue setup */
++	writel(NVREG_MISC1_FORCE | (np->duplex ? 0 : NVREG_MISC1_HD),
++	       base + NvRegMisc1);
++	writel(readl(base + NvRegTransmitterStatus),
++	       base + NvRegTransmitterStatus);
++	writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags);
++	writel(NVREG_OFFLOAD_NORMAL, base + NvRegOffloadConfig);
++
++	writel(readl(base + NvRegReceiverStatus),
++	       base + NvRegReceiverStatus);
++
++	/* FIXME: I cheated and used the calculator to get a random number */
++	i = 75963081;
++	writel(NVREG_RNDSEED_FORCE | (i & NVREG_RNDSEED_MASK),
++	       base + NvRegRandomSeed);
++	writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
++	writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
++	writel(NVREG_POLL_DEFAULT, base + NvRegPollingInterval);
++	writel(NVREG_UNKSETUP6_VAL, base + NvRegUnknownSetupReg6);
++	writel((np->
++		phyaddr << NVREG_ADAPTCTL_PHYSHIFT) |
++	       NVREG_ADAPTCTL_PHYVALID, base + NvRegAdapterControl);
++	writel(NVREG_UNKSETUP4_VAL, base + NvRegUnknownSetupReg4);
++	writel(NVREG_WAKEUPFLAGS_VAL, base + NvRegWakeUpFlags);
++
++	/* 7) start packet processing */
++	writel((u32) virt_to_le32desc(&rx_ring[0]),
++	       base + NvRegRxRingPhysAddr);
++	writel((u32) virt_to_le32desc(&tx_ring[0]),
++	       base + NvRegTxRingPhysAddr);
++
++
++	writel(((RX_RING - 1) << NVREG_RINGSZ_RXSHIFT) +
++	       ((TX_RING - 1) << NVREG_RINGSZ_TXSHIFT),
++	       base + NvRegRingSizes);
++
++	i = readl(base + NvRegPowerState);
++	if ((i & NVREG_POWERSTATE_POWEREDUP) == 0) {
++		writel(NVREG_POWERSTATE_POWEREDUP | i,
++		       base + NvRegPowerState);
++	}
++	pci_push(base);
++	udelay(10);
++	writel(readl(base + NvRegPowerState) | NVREG_POWERSTATE_VALID,
++	       base + NvRegPowerState);
++	writel(NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl);
++
++	writel(0, base + NvRegIrqMask);
++	pci_push(base);
++	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
++	pci_push(base);
++	writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus);
++	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
++	pci_push(base);
++/*
++	writel(np->irqmask, base + NvRegIrqMask);
++*/
++	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
++	writel(0, base + NvRegMulticastAddrB);
++	writel(0, base + NvRegMulticastMaskA);
++	writel(0, base + NvRegMulticastMaskB);
++	writel(NVREG_PFF_ALWAYS | NVREG_PFF_MYADDR,
++	       base + NvRegPacketFilterFlags);
++
++	set_multicast(nic);
++	//start_rx(nic);
++	start_tx(nic);
++
++	if (!
++	    (mii_rw(nic, np->phyaddr, MII_BMSR, MII_READ) &
++	     BMSR_ANEGCOMPLETE)) {
++		printf("no link during initialization.\n");
++	}
++
++	udelay(10000);
++      out_drain:
++	return ret;
++}
++
++//extern void hex_dump(const char *data, const unsigned int len);
++
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int forcedeth_poll(struct nic *nic, int retrieve)
++{
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++
++	struct ring_desc *prd;
++	int len;
++	int i;
++
++	i = np->cur_rx % RX_RING;
++	prd = &rx_ring[i];
++
++	if ( ! (prd->Flags & cpu_to_le16(NV_RX_DESCRIPTORVALID)) ) {
++	  return 0;
++	}
++
++	if ( ! retrieve ) return 1;
++
++	/* got a valid packet - forward it to the network core */
++	len = cpu_to_le16(prd->Length);
++	nic->packetlen = len;
++	//hex_dump(rxb + (i * RX_NIC_BUFSIZE), len);
++	memcpy(nic->packet, rxb +
++	       (i * RX_NIC_BUFSIZE), nic->packetlen);
++
++	wmb();
++	np->cur_rx++;
++	alloc_rx(nic);
++	return 1;
++}
++
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void forcedeth_transmit(struct nic *nic, const char *d,	/* Destination */
++			       unsigned int t,	/* Type */
++			       unsigned int s,	/* size */
++			       const char *p)
++{				/* Packet */
++	/* send the packet to destination */
++	u8 *ptxb;
++	u16 nstype;
++	//u16 status;
++	u8 *base = (u8 *) BASE;
++	int nr = np->next_tx % TX_RING;
++
++	/* point to the current txb incase multiple tx_rings are used */
++	ptxb = txb + (nr * RX_NIC_BUFSIZE);
++	//np->tx_skbuff[nr] = ptxb;
++
++	/* copy the packet to ring buffer */
++	memcpy(ptxb, d, ETH_ALEN);	/* dst */
++	memcpy(ptxb + ETH_ALEN, nic->node_addr, ETH_ALEN);	/* src */
++	nstype = htons((u16) t);	/* type */
++	memcpy(ptxb + 2 * ETH_ALEN, (u8 *) & nstype, 2);	/* type */
++	memcpy(ptxb + ETH_HLEN, p, s);
++
++	s += ETH_HLEN;
++	while (s < ETH_ZLEN)	/* pad to min length */
++		ptxb[s++] = '\0';
++
++	tx_ring[nr].PacketBuffer = (u32) virt_to_le32desc(ptxb);
++	tx_ring[nr].Length = cpu_to_le16(s - 1);
++
++	wmb();
++	tx_ring[nr].Flags = np->tx_flags;
++
++	writel(NVREG_TXRXCTL_KICK, base + NvRegTxRxControl);
++	pci_push(base);
++	tx_ring[nr].Flags = np->tx_flags;
++	np->next_tx++;
++}
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void forcedeth_disable(struct dev *dev __unused)
++{
++	/* put the card in its initial state */
++	/* This function serves 3 purposes.
++	 * This disables DMA and interrupts so we don't receive
++	 *  unexpected packets or interrupts from the card after
++	 *  etherboot has finished. 
++	 * This frees resources so etherboot may use
++	 *  this driver on another interface
++	 * This allows etherboot to reinitialize the interface
++	 *  if something is something goes wrong.
++	 */
++	u8 *base = (u8 *) BASE;
++	np->in_shutdown = 1;
++	stop_tx();
++	stop_rx();
++
++	/* disable interrupts on the nic or we will lock up */
++	writel(0, base + NvRegIrqMask);
++	pci_push(base);
++	dprintf(("Irqmask is zero again\n"));
++
++	/* specia op:o write back the misordered MAC address - otherwise
++	 * the next probe_nic would see a wrong address.
++	 */
++	writel(np->orig_mac[0], base + NvRegMacAddrA);
++	writel(np->orig_mac[1], base + NvRegMacAddrB);
++}
++
++/**************************************************************************
++IRQ - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void forcedeth_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++***************************************************************************/
++#define IORESOURCE_MEM 0x00000200
++#define board_found 1
++#define valid_link 0
++static int forcedeth_probe(struct dev *dev, struct pci_device *pci)
++{
++	struct nic *nic = (struct nic *) dev;
++	unsigned long addr;
++	int sz;
++	u8 *base;
++
++	if (pci->ioaddr == 0)
++		return 0;
++
++	printf("forcedeth.c: Found %s, vendor=0x%hX, device=0x%hX\n",
++	       pci->name, pci->vendor, pci->dev_id);
++
++	nic->irqno  = 0;
++	nic->ioaddr = pci->ioaddr & ~3;
++
++	/* point to private storage */
++	np = &npx;
++
++	adjust_pci_device(pci);
++
++	addr = pci_bar_start(pci, PCI_BASE_ADDRESS_0);
++	sz = pci_bar_size(pci, PCI_BASE_ADDRESS_0);
++
++	/* BASE is used throughout to address the card */
++	BASE = (unsigned long) ioremap(addr, sz);
++	if (!BASE)
++		return 0;
++	//rx_ring[0] = rx_ring;
++	//tx_ring[0] = tx_ring; 
++
++	/* read the mac address */
++	base = (u8 *) BASE;
++	np->orig_mac[0] = readl(base + NvRegMacAddrA);
++	np->orig_mac[1] = readl(base + NvRegMacAddrB);
++
++	nic->node_addr[0] = (np->orig_mac[1] >> 8) & 0xff;
++	nic->node_addr[1] = (np->orig_mac[1] >> 0) & 0xff;
++	nic->node_addr[2] = (np->orig_mac[0] >> 24) & 0xff;
++	nic->node_addr[3] = (np->orig_mac[0] >> 16) & 0xff;
++	nic->node_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
++	nic->node_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
++#ifdef LINUX
++	if (!is_valid_ether_addr(dev->dev_addr)) {
++		/*
++		 * Bad mac address. At least one bios sets the mac address
++		 * to 01:23:45:67:89:ab
++		 */
++		printk(KERN_ERR
++		       "%s: Invalid Mac address detected: %02x:%02x:%02x:%02x:%02x:%02x\n",
++		       pci_name(pci_dev), dev->dev_addr[0],
++		       dev->dev_addr[1], dev->dev_addr[2],
++		       dev->dev_addr[3], dev->dev_addr[4],
++		       dev->dev_addr[5]);
++		printk(KERN_ERR
++		       "Please complain to your hardware vendor. Switching to a random MAC.\n");
++		dev->dev_addr[0] = 0x00;
++		dev->dev_addr[1] = 0x00;
++		dev->dev_addr[2] = 0x6c;
++		get_random_bytes(&dev->dev_addr[3], 3);
++	}
++#endif
++	printf("%s: MAC Address %!, ", pci->name, nic->node_addr);
++
++	np->tx_flags =
++	    cpu_to_le16(NV_TX_LASTPACKET | NV_TX_LASTPACKET1 |
++			NV_TX_VALID);
++	switch (pci->dev_id) {
++	case 0x01C3:		// nforce
++		np->irqmask = NVREG_IRQMASK_WANTED_2;
++		np->irqmask |= NVREG_IRQ_TIMER;
++		break;
++	case 0x0066:		// nforce2
++		np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1);
++		np->irqmask = NVREG_IRQMASK_WANTED_2;
++		np->irqmask |= NVREG_IRQ_TIMER;
++		break;
++	case 0x00D6:		// nforce3
++		np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1);
++		np->irqmask = NVREG_IRQMASK_WANTED_2;
++		np->irqmask |= NVREG_IRQ_TIMER;
++
++	}
++	dprintf(("%s: forcedeth.c: subsystem: %hX:%hX bound to %s\n",
++		 pci->name, pci->vendor, pci->dev_id, pci->name));
++
++	forcedeth_reset(nic);
++//      if (board_found && valid_link)
++	/* point to NIC specific routines */
++	dev->disable = forcedeth_disable;
++	nic->poll = forcedeth_poll;
++	nic->transmit = forcedeth_transmit;
++	nic->irq    = forcedeth_irq;
++	return 1;
++//      }
++	/* else */
++}
++
++static struct pci_id forcedeth_nics[] = {
++	PCI_ROM(0x10de, 0x01C3, "nforce", "nForce Ethernet Controller"),
++	PCI_ROM(0x10de, 0x0066, "nforce2", "nForce2 Ethernet Controller"),
++	PCI_ROM(0x10de, 0x00D6, "nforce3", "nForce3 Ethernet Controller"),
++};
++
++struct pci_driver forcedeth_driver = {
++	.type = NIC_DRIVER,
++	.name = "forcedeth",
++	.probe = forcedeth_probe,
++	.ids = forcedeth_nics,
++	.id_count = sizeof(forcedeth_nics) / sizeof(forcedeth_nics[0]),
++	.class = 0,
++};
+diff -Naur grub-0.97.orig/netboot/fsys_tftp.c grub-0.97/netboot/fsys_tftp.c
+--- grub-0.97.orig/netboot/fsys_tftp.c	2004-04-15 11:38:40.000000000 +0000
++++ grub-0.97/netboot/fsys_tftp.c	2005-08-31 19:03:35.000000000 +0000
+@@ -29,14 +29,15 @@
+ /* #define TFTP_DEBUG	1 */
+ 
+ #include <filesys.h>
++#include <shared.h>
+ 
+-#define GRUB	1
+-#include <etherboot.h>
+-#include <nic.h>
++#include "grub.h"
++#include "tftp.h"
++#include "nic.h"
+ 
+ static int retry;
+ static unsigned short iport = 2000;
+-static unsigned short oport;
++static unsigned short oport = 0;
+ static unsigned short block, prevblock;
+ static int bcounter;
+ static struct tftp_t tp, saved_tp;
+@@ -46,6 +47,172 @@
+ static unsigned short len, saved_len;
+ static char *buf;
+ 
++/**
++ * tftp_read
++ *
++ * Read file with _name_, data handled by _fnc_. In fact, grub never
++ * use it, we just use it to read dhcp config file.
++ */
++static int await_tftp(int ival, void *ptr __unused, 
++		      unsigned short ptype __unused, struct iphdr *ip, 
++		      struct udphdr *udp)
++{
++	if (!udp) {
++		return 0;
++	}
++	if (arptable[ARP_CLIENT].ipaddr.s_addr != ip->dest.s_addr)
++		return 0;
++	if (ntohs(udp->dest) != ival)
++		return 0;
++	return 1;
++}
++
++int tftp_file_read(const char *name, int (*fnc)(unsigned char *, unsigned int, unsigned int, int))
++{
++	struct tftpreq_t tp;
++	struct tftp_t  *tr;
++	int		rc;
++
++	retry = 0;
++	block = 0;
++	prevblock = 0;
++	bcounter = 0;
++	
++
++	rx_qdrain();
++
++	tp.opcode = htons(TFTP_RRQ);
++	/* Warning: the following assumes the layout of bootp_t.
++	   But that's fixed by the IP, UDP and BOOTP specs. */
++	len = sizeof(tp.ip) + sizeof(tp.udp) + sizeof(tp.opcode) +
++		sprintf((char *)tp.u.rrq, "%s%coctet%cblksize%c%d",
++		name, 0, 0, 0, TFTP_MAX_PACKET) + 1;
++	if (!udp_transmit(arptable[ARP_SERVER].ipaddr.s_addr, ++iport,
++			  TFTP_PORT, len, &tp))
++		return (0);
++	for (;;)
++	{
++		long timeout;
++#ifdef	CONGESTED
++		timeout = rfc2131_sleep_interval(block?TFTP_REXMT: TIMEOUT, retry);
++#else
++		timeout = rfc2131_sleep_interval(TIMEOUT, retry);
++#endif
++		if (!await_reply(await_tftp, iport, NULL, timeout))
++		{
++			if (!block && retry++ < MAX_TFTP_RETRIES)
++			{	/* maybe initial request was lost */
++				if (!udp_transmit(arptable[ARP_SERVER].ipaddr.s_addr,
++						  ++iport, TFTP_PORT, len, &tp))
++					return (0);
++				continue;
++			}
++#ifdef	CONGESTED
++			if (block && ((retry += TFTP_REXMT) < TFTP_TIMEOUT))
++			{	/* we resend our last ack */
++#ifdef	MDEBUG
++				printf("<REXMT>\n");
++#endif
++				udp_transmit(arptable[ARP_SERVER].ipaddr.s_addr,
++					     iport, oport,
++					     TFTP_MIN_PACKET, &tp);
++				continue;
++			}
++#endif
++			break;	/* timeout */
++		}
++		tr = (struct tftp_t *)&nic.packet[ETH_HLEN];
++		if (tr->opcode == ntohs(TFTP_ERROR))
++		{
++			printf("TFTP error %d (%s)\n",
++			       ntohs(tr->u.err.errcode),
++			       tr->u.err.errmsg);
++			break;
++		}
++
++		if (tr->opcode == ntohs(TFTP_OACK)) {
++			char *p = tr->u.oack.data, *e;
++
++			if (prevblock)		/* shouldn't happen */
++				continue;	/* ignore it */
++			len = ntohs(tr->udp.len) - sizeof(struct udphdr) - 2;
++			if (len > TFTP_MAX_PACKET)
++				goto noak;
++			e = p + len;
++			while (*p != '\0' && p < e) {
++/* 				if (!strcasecmp("blksize", p)) { */
++				if (!grub_strcmp("blksize", p)) {
++					p += 8;
++/* 					if ((packetsize = strtoul(p, &p, 10)) < */
++					if ((packetsize = getdec(&p)) < TFTP_DEFAULTSIZE_PACKET)
++						goto noak;
++					while (p < e && *p) p++;
++					if (p < e)
++						p++;
++				}
++				else {
++				noak:
++					tp.opcode = htons(TFTP_ERROR);
++					tp.u.err.errcode = 8;
++/*
++ *	Warning: the following assumes the layout of bootp_t.
++ *	But that's fixed by the IP, UDP and BOOTP specs.
++ */
++					len = sizeof(tp.ip) + sizeof(tp.udp) + sizeof(tp.opcode) + sizeof(tp.u.err.errcode) +
++/*
++ *	Normally bad form to omit the format string, but in this case
++ *	the string we are copying from is fixed. sprintf is just being
++ *	used as a strcpy and strlen.
++ */
++						sprintf((char *)tp.u.err.errmsg,
++						"RFC1782 error") + 1;
++					udp_transmit(arptable[ARP_SERVER].ipaddr.s_addr,
++						     iport, ntohs(tr->udp.src),
++						     len, &tp);
++					return (0);
++				}
++			}
++			if (p > e)
++				goto noak;
++			block = tp.u.ack.block = 0; /* this ensures, that */
++						/* the packet does not get */
++						/* processed as data! */
++		}
++		else if (tr->opcode == htons(TFTP_DATA)) {
++			len = ntohs(tr->udp.len) - sizeof(struct udphdr) - 4;
++			if (len > packetsize)	/* shouldn't happen */
++				continue;	/* ignore it */
++			block = ntohs(tp.u.ack.block = tr->u.data.block); }
++		else {/* neither TFTP_OACK nor TFTP_DATA */
++			break;
++		}
++
++		if ((block || bcounter) && (block != (unsigned short)(prevblock+1))) {
++			/* Block order should be continuous */
++			tp.u.ack.block = htons(block = prevblock);
++		}
++		tp.opcode = htons(TFTP_ACK);
++		oport = ntohs(tr->udp.src);
++		udp_transmit(arptable[ARP_SERVER].ipaddr.s_addr, iport,
++			     oport, TFTP_MIN_PACKET, &tp);	/* ack */
++		if ((unsigned short)(block-prevblock) != 1) {
++			/* Retransmission or OACK, don't process via callback
++			 * and don't change the value of prevblock.  */
++			continue;
++		}
++		prevblock = block;
++		retry = 0;	/* It's the right place to zero the timer? */
++		if ((rc = fnc(tr->u.data.download,
++			      ++bcounter, len, len < packetsize)) <= 0)
++			return(rc);
++		if (len < packetsize) {	/* End of data --- fnc should not have returned */
++			printf("tftp download complete, but\n");
++			return (1);
++		}
++	}
++	return (0);
++}
++
+ /* Fill the buffer by receiving the data via the TFTP protocol.  */
+ static int
+ buf_fill (int abort)
+@@ -65,9 +232,9 @@
+       timeout = rfc2131_sleep_interval (TIMEOUT, retry);
+ #endif
+   
+-      if (! await_reply (AWAIT_TFTP, iport, NULL, timeout))
++      if (! await_reply (await_tftp, iport, NULL, timeout))
+ 	{
+-	  if (ip_abort)
++	  if (user_abort)
+ 	    return 0;
+ 
+ 	  if (! block && retry++ < MAX_TFTP_RETRIES)
+@@ -270,13 +437,7 @@
+   buf_read = 0;
+   saved_filepos = 0;
+ 
+-  /* Clear out the Rx queue first.  It contains nothing of interest,
+-   * except possibly ARP requests from the DHCP/TFTP server.  We use
+-   * polling throughout Etherboot, so some time may have passed since we
+-   * last polled the receive queue, which may now be filled with
+-   * broadcast packets.  This will cause the reply to the packets we are
+-   * about to send to be lost immediately.  Not very clever.  */
+-  await_reply (AWAIT_QDRAIN, 0, NULL, 0);
++  rx_qdrain();
+   
+ #ifdef TFTP_DEBUG
+   grub_printf ("send_rrq ()\n");
+diff -Naur grub-0.97.orig/netboot/grub.h grub-0.97/netboot/grub.h
+--- grub-0.97.orig/netboot/grub.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/grub.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,171 @@
++#ifndef GRUB_H
++#define GRUB_H
++
++#include "osdep.h"
++#include "byteswap.h"
++#include "in.h"
++#include "ip.h"
++#include "udp.h"
++#include "if_ether.h"
++#include "latch.h"
++#include "io.h"
++#include "nic.h"
++#include <shared.h>
++
++#define K_ESC		'\033'
++#define K_EOF		'\04'  /* Ctrl-D */
++#define K_INTR		'\03'  /* Ctrl-C */
++
++#ifndef	MAX_RPC_RETRIES
++#define MAX_RPC_RETRIES		20
++#endif
++
++
++/* Inter-packet retry in ticks */
++#ifndef TIMEOUT
++#define TIMEOUT			(10*TICKS_PER_SEC)
++#endif
++
++#ifndef	NULL
++#define NULL	((void *)0)
++#endif
++
++
++#define ARP_CLIENT	0
++#define ARP_SERVER	1
++#define ARP_GATEWAY	2
++#define MAX_ARP		ARP_GATEWAY+1
++
++#define IGMP_SERVER	0
++#define MAX_IGMP	IGMP_SERVER+1
++
++#define	RARP_REQUEST	3
++#define	RARP_REPLY	4
++
++
++#define MULTICAST_MASK    0xF0000000
++#define MULTICAST_NETWORK 0xE0000000
++
++struct arptable_t {
++	in_addr ipaddr;
++	uint8_t node[6];
++};
++
++struct igmptable_t {
++	in_addr group;
++	unsigned long time;
++};
++
++#define	KERNEL_BUF	(BOOTP_DATA_ADDR->bootp_reply.bp_file)
++
++#define	FLOPPY_BOOT_LOCATION	0x7c00
++/* Must match offsets in loader.S */
++#define ROM_SEGMENT		0x1fa
++#define ROM_LENGTH		0x1fc
++
++#define	ROM_INFO_LOCATION	(FLOPPY_BOOT_LOCATION+ROM_SEGMENT)
++/* at end of floppy boot block */
++
++
++
++/* Define a type for passing info to a loaded program */
++struct ebinfo {
++	uint8_t  major, minor;	/* Version */
++	uint16_t flags;		/* Bit flags */
++};
++
++/***************************************************************************
++External prototypes
++***************************************************************************/
++extern void rx_qdrain P((void));
++extern int tftp P((const char *name, int (*)(unsigned char *, unsigned int, unsigned int, int)));
++extern int ip_transmit P((int len, const void *buf));
++extern void build_ip_hdr P((unsigned long destip, int ttl, int protocol, 
++	int option_len, int len, const void *buf));
++extern void build_udp_hdr P((unsigned long destip, 
++	unsigned int srcsock, unsigned int destsock, int ttl,
++	int len, const void *buf));
++extern int udp_transmit P((unsigned long destip, unsigned int srcsock,
++	unsigned int destsock, int len, const void *buf));
++typedef int (*reply_t)(int ival, void *ptr, unsigned short ptype, struct iphdr *ip, struct udphdr *udp);
++extern int await_reply P((reply_t reply,	int ival, void *ptr, long timeout));
++extern int decode_rfc1533 P((unsigned char *, unsigned int, unsigned int, int));
++extern void join_group(int slot, unsigned long group);
++extern void leave_group(int slot);
++#define RAND_MAX 2147483647L
++extern uint16_t ipchksum P((const void *ip, unsigned long len));
++extern uint16_t add_ipchksums P((unsigned long offset, uint16_t sum, uint16_t new));
++extern int32_t random P((void));
++extern long rfc2131_sleep_interval P((long base, int exp));
++extern long rfc1112_sleep_interval P((long base, int exp));
++#ifndef DOWNLOAD_PROTO_TFTP
++#define	tftp(fname, load_block) 0
++#endif
++extern void cleanup P((void));
++
++/* misc.c */
++extern void twiddle P((void));
++extern void sleep P((int secs));
++extern void interruptible_sleep P((int secs));
++extern void poll_interruptions P((void));
++extern int strcasecmp P((const char *a, const char *b));
++extern char *substr P((const char *a, const char *b));
++extern unsigned long strtoul P((const char *p, const char **, int base));
++extern void printf P((const char *, ...));
++extern int sprintf P((char *, const char *, ...));
++extern int inet_aton P((char *p, in_addr *i));
++extern void putchar P((int));
++extern int getchar P((void));
++extern int iskey P((void));
++
++extern void grub_printf(const char *, ...);
++extern char config_file[128];
++extern void etherboot_printf(const char *,  ...);
++extern int etherboot_sprintf(char *, const char *, ...);
++extern int getdec(char **s);
++extern void cleanup_net(void);
++extern void print_network_configuration (void);
++extern int ifconfig (char *, char *, char *, char *);
++extern struct arptable_t arptable[MAX_ARP];
++
++#undef printf
++#undef sprintf
++#define printf etherboot_printf
++#define sprintf etherboot_sprintf
++
++#ifdef DEBUG
++#define EnterFunction(func) printf("Enter: " func "\n");
++#define LeaveFunction(func) printf("Leave: " func "\n");
++#else
++#define EnterFunction(func)
++#define LeaveFunction(func)
++#endif
++
++/*
++ * Some codes from etherboot use a level in DEBUG. Define it to be
++ * zero means no debug info output, that will make them silence in
++ * compiling. Up it as you want.
++ */
++#ifndef DEBUG
++#  define DEBUG 0
++#endif
++
++/*#define RPC_DEBUG*/
++
++extern char *hostname;
++
++extern int hostnamelen;
++/* Whether network is ready */
++extern int network_ready;
++
++/* User aborted in await_reply if not zero */
++extern int user_abort;
++
++extern int rarp(void);
++extern int grub_eth_probe(void);
++extern int bootp(void);
++
++extern int dhcp(void);
++
++extern struct nic nic;
++#endif /* GRUB_H */
+diff -Naur grub-0.97.orig/netboot/i386_byteswap.h grub-0.97/netboot/i386_byteswap.h
+--- grub-0.97.orig/netboot/i386_byteswap.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/i386_byteswap.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,46 @@
++#ifndef ETHERBOOT_BITS_BYTESWAP_H
++#define ETHERBOOT_BITS_BYTESWAP_H
++
++#include "types.h"
++static inline uint16_t __i386_bswap_16(uint16_t x)
++{
++	__asm__("xchgb %b0,%h0\n\t"
++		: "=q" (x)
++		: "0" (x));
++	return x;
++}
++
++static inline uint32_t __i386_bswap_32(uint32_t x)
++{
++	__asm__("xchgb %b0,%h0\n\t"
++		"rorl $16,%0\n\t"
++		"xchgb %b0,%h0"
++		: "=q" (x)
++		: "0" (x));
++	return x;
++}
++
++
++#define __bswap_constant_16(x) \
++	((uint16_t)((((uint16_t)(x) & 0x00ff) << 8) | \
++		(((uint16_t)(x) & 0xff00) >> 8)))
++
++#define __bswap_constant_32(x) \
++	((uint32_t)((((uint32_t)(x) & 0x000000ffU) << 24) | \
++		(((uint32_t)(x) & 0x0000ff00U) <<  8) | \
++		(((uint32_t)(x) & 0x00ff0000U) >>  8) | \
++		(((uint32_t)(x) & 0xff000000U) >> 24)))
++
++#define __bswap_16(x) \
++	(__builtin_constant_p(x) ? \
++	__bswap_constant_16(x) : \
++	__i386_bswap_16(x))
++
++
++#define __bswap_32(x) \
++	(__builtin_constant_p(x) ? \
++	__bswap_constant_32(x) : \
++	__i386_bswap_32(x))
++
++
++#endif /* ETHERBOOT_BITS_BYTESWAP_H */
+diff -Naur grub-0.97.orig/netboot/i386_elf.h grub-0.97/netboot/i386_elf.h
+--- grub-0.97.orig/netboot/i386_elf.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/i386_elf.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,91 @@
++#ifndef I386_BITS_ELF_H
++#define I386_BITS_ELF_H
++
++#include "cpu.h"
++
++#ifdef CONFIG_X86_64
++/* ELF Defines for the 64bit version of the current architecture */
++#define EM_CURRENT_64	EM_X86_64
++#define EM_CURRENT_64_PRESENT ( \
++	CPU_FEATURE_P(cpu_info.x86_capability, LM) && \
++	CPU_FEATURE_P(cpu_info.x86_capability, PAE) && \
++	CPU_FEATURE_P(cpu_info.x86_capability, PSE))
++			
++#define ELF_CHECK_X86_64_ARCH(x) \
++	(EM_CURRENT_64_PRESENT && ((x).e_machine == EM_X86_64))
++#define __unused_i386
++#else
++#define ELF_CHECK_X86_64_ARCH(x) 0
++#define __unused_i386 __unused
++#endif
++
++
++/* ELF Defines for the current architecture */
++#define	EM_CURRENT	EM_386
++#define ELFDATA_CURRENT	ELFDATA2LSB
++
++#define ELF_CHECK_I386_ARCH(x) \
++	(((x).e_machine == EM_386) || ((x).e_machine == EM_486))
++
++#define ELF_CHECK_ARCH(x) \
++	((ELF_CHECK_I386_ARCH(x) || ELF_CHECK_X86_64_ARCH(x)) && \
++		((x).e_entry <= 0xffffffffUL))
++
++#ifdef  IMAGE_FREEBSD
++/*
++ * FreeBSD has this rather strange "feature" of its design.
++ * At some point in its evolution, FreeBSD started to rely
++ * externally on private/static/debug internal symbol information.
++ * That is, some of the interfaces that software uses to access
++ * and work with the FreeBSD kernel are made available not
++ * via the shared library symbol information (the .DYNAMIC section)
++ * but rather the debug symbols.  This means that any symbol, not
++ * just publicly defined symbols can be (and are) used by system
++ * tools to make the system work.  (such as top, swapinfo, swapon,
++ * etc)
++ *
++ * Even worse, however, is the fact that standard ELF loaders do
++ * not know how to load the symbols since they are not within
++ * an ELF PT_LOAD section.  The kernel needs these symbols to
++ * operate so the following changes/additions to the boot
++ * loading of EtherBoot have been made to get the kernel to load.
++ * All of the changes are within IMAGE_FREEBSD such that the
++ * extra/changed code only compiles when FREEBSD support is
++ * enabled.
++ */
++
++/*
++ * Section header for FreeBSD (debug symbol kludge!) support
++ */
++typedef struct {
++	Elf32_Word	sh_name;	/* Section name (index into the
++					   section header string table). */
++	Elf32_Word	sh_type;	/* Section type. */
++	Elf32_Word	sh_flags;	/* Section flags. */
++	Elf32_Addr	sh_addr;	/* Address in memory image. */
++	Elf32_Off	sh_offset;	/* Offset in file. */
++	Elf32_Size	sh_size;	/* Size in bytes. */
++	Elf32_Word	sh_link;	/* Index of a related section. */
++	Elf32_Word	sh_info;	/* Depends on section type. */
++	Elf32_Size	sh_addralign;	/* Alignment in bytes. */
++	Elf32_Size	sh_entsize;	/* Size of each entry in section. */
++} Elf32_Shdr;
++
++/* sh_type */
++#define SHT_SYMTAB	2		/* symbol table section */
++#define SHT_STRTAB	3		/* string table section */
++
++/*
++ * Module information subtypes (for the metadata that we need to build)
++ */
++#define MODINFO_END		0x0000		/* End of list */
++#define MODINFO_NAME		0x0001		/* Name of module (string) */
++#define MODINFO_TYPE		0x0002		/* Type of module (string) */
++#define MODINFO_METADATA	0x8000		/* Module-specfic */
++
++#define MODINFOMD_SSYM		0x0003		/* start of symbols */
++#define MODINFOMD_ESYM		0x0004		/* end of symbols */
++
++#endif	/* IMAGE_FREEBSD */
++
++#endif /* I386_BITS_ELF_H */
+diff -Naur grub-0.97.orig/netboot/i386_endian.h grub-0.97/netboot/i386_endian.h
+--- grub-0.97.orig/netboot/i386_endian.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/i386_endian.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,6 @@
++#ifndef ETHERBOOT_BITS_ENDIAN_H
++#define ETHERBOOT_BITS_ENDIAN_H
++
++#define __BYTE_ORDER __LITTLE_ENDIAN
++
++#endif /* ETHERBOOT_BITS_ENDIAN_H */
+diff -Naur grub-0.97.orig/netboot/i386_timer.c grub-0.97/netboot/i386_timer.c
+--- grub-0.97.orig/netboot/i386_timer.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/i386_timer.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,192 @@
++/* A couple of routines to implement a low-overhead timer for drivers */
++
++ /*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2, or (at
++ * your option) any later version.
++ */
++#include "grub.h"
++#include "osdep.h"
++#include "io.h"
++#include "timer.h"
++#include "latch.h"
++
++void __load_timer2(unsigned int ticks)
++{
++	/*
++	 * Now let's take care of PPC channel 2
++	 *
++	 * Set the Gate high, program PPC channel 2 for mode 0,
++	 * (interrupt on terminal count mode), binary count,
++	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
++	 *
++	 * Note some implementations have a bug where the high bits byte
++	 * of channel 2 is ignored.
++	 */
++	/* Set up the timer gate, turn off the speaker */
++	/* Set the Gate high, disable speaker */
++	outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
++	/* binary, mode 0, LSB/MSB, Ch 2 */
++	outb(TIMER2_SEL|WORD_ACCESS|MODE0|BINARY_COUNT, TIMER_MODE_PORT);
++	/* LSB of ticks */
++	outb(ticks & 0xFF, TIMER2_PORT);
++	/* MSB of ticks */
++	outb(ticks >> 8, TIMER2_PORT);
++}
++
++static int __timer2_running(void)
++{
++	return ((inb(PPC_PORTB) & PPCB_T2OUT) == 0);
++}
++
++#if !defined(CONFIG_TSC_CURRTICKS)
++void setup_timers(void)
++{
++	return;
++}
++
++void load_timer2(unsigned int ticks)
++{
++	return __load_timer2(ticks);
++}
++
++int timer2_running(void)
++{
++	return __timer2_running();
++}
++
++void ndelay(unsigned int nsecs)
++{
++	waiton_timer2((nsecs * CLOCK_TICK_RATE)/1000000000);
++}
++void udelay(unsigned int usecs)
++{
++	waiton_timer2((usecs * TICKS_PER_MS)/1000);
++}
++#endif /* !defined(CONFIG_TSC_CURRTICKS) */
++
++#if defined(CONFIG_TSC_CURRTICKS)
++
++#define rdtsc(low,high) \
++     __asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high))
++
++#define rdtscll(val) \
++     __asm__ __volatile__ ("rdtsc" : "=A" (val))
++
++
++/* Number of clock ticks to time with the rtc */
++#define LATCH 0xFF
++
++#define LATCHES_PER_SEC ((CLOCK_TICK_RATE + (LATCH/2))/LATCH)
++#define TICKS_PER_LATCH ((LATCHES_PER_SEC + (TICKS_PER_SEC/2))/TICKS_PER_SEC)
++
++static void sleep_latch(void)
++{
++	__load_timer2(LATCH);
++	while(__timer2_running());
++}
++
++/* ------ Calibrate the TSC ------- 
++ * Time how long it takes to excute a loop that runs in known time.
++ * And find the convertion needed to get to CLOCK_TICK_RATE
++ */
++
++
++static unsigned long long calibrate_tsc(void)
++{
++	unsigned long startlow, starthigh;
++	unsigned long endlow, endhigh;
++	
++	rdtsc(startlow,starthigh);
++	sleep_latch();
++	rdtsc(endlow,endhigh);
++
++	/* 64-bit subtract - gcc just messes up with long longs */
++	__asm__("subl %2,%0\n\t"
++		"sbbl %3,%1"
++		:"=a" (endlow), "=d" (endhigh)
++		:"g" (startlow), "g" (starthigh),
++		"0" (endlow), "1" (endhigh));
++	
++	/* Error: ECPUTOOFAST */
++	if (endhigh)
++		goto bad_ctc;
++	
++	endlow *= TICKS_PER_LATCH;
++	return endlow;
++
++	/*
++	 * The CTC wasn't reliable: we got a hit on the very first read,
++	 * or the CPU was so fast/slow that the quotient wouldn't fit in
++	 * 32 bits..
++	 */
++bad_ctc:
++	printf("bad_ctc\n");
++	return 0;
++}
++
++static unsigned long clocks_per_tick;
++void setup_timers(void)
++{
++	if (!clocks_per_tick) {
++		clocks_per_tick = calibrate_tsc();
++		/* Display the CPU Mhz to easily test if the calibration was bad */
++		printf("CPU %ld Mhz\n", (clocks_per_tick/1000 * TICKS_PER_SEC)/1000);
++	}
++}
++
++unsigned long currticks(void)
++{
++	unsigned long clocks_high, clocks_low;
++	unsigned long currticks;
++	/* Read the Time Stamp Counter */
++	rdtsc(clocks_low, clocks_high);
++
++	/* currticks = clocks / clocks_per_tick; */
++	__asm__("divl %1"
++		:"=a" (currticks)
++		:"r" (clocks_per_tick), "0" (clocks_low), "d" (clocks_high));
++
++
++	return currticks;
++}
++
++static unsigned long long timer_timeout;
++static int __timer_running(void)
++{
++	unsigned long long now;
++	rdtscll(now);
++	return now < timer_timeout;
++}
++
++void udelay(unsigned int usecs)
++{
++	unsigned long long now;
++	rdtscll(now);
++	timer_timeout = now + usecs * ((clocks_per_tick * TICKS_PER_SEC)/(1000*1000));
++	while(__timer_running());
++}
++void ndelay(unsigned int nsecs)
++{
++	unsigned long long now;
++	rdtscll(now);
++	timer_timeout = now + nsecs * ((clocks_per_tick * TICKS_PER_SEC)/(1000*1000*1000));
++	while(__timer_running());
++}
++
++void load_timer2(unsigned int timer2_ticks)
++{
++	unsigned long long now;
++	unsigned long clocks;
++	rdtscll(now);
++	clocks = timer2_ticks * ((clocks_per_tick * TICKS_PER_SEC)/CLOCK_TICK_RATE);
++	timer_timeout = now + clocks;
++}
++
++int timer2_running(void)
++{
++	return __timer_running();
++}
++
++#endif /* RTC_CURRTICKS */
+diff -Naur grub-0.97.orig/netboot/i82586.c grub-0.97/netboot/i82586.c
+--- grub-0.97.orig/netboot/i82586.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/i82586.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,825 +0,0 @@
+-/**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-i82586 NIC driver for Etherboot
+-Ken Yap, January 1998
+-***************************************************************************/
+-
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+-#include "etherboot.h"
+-#include "nic.h"
+-#include "cards.h"
+-#include "timer.h"
+-
+-#define	udelay(n)	waiton_timer2(((n)*TICKS_PER_MS)/1000)
+-
+-/* Sources of information:
+-
+-   Donald Becker's excellent 3c507 driver in Linux
+-   Intel 82596 data sheet (yes, 82596; it has a 586 compatibility mode)
+-*/
+-
+-/* Code below mostly stolen wholesale from 3c507.c driver in Linux */
+-
+-/*
+-		Details of the i82586.
+-
+-   You'll really need the databook to understand the details of this part,
+-   but the outline is that the i82586 has two separate processing units.
+-   Both are started from a list of three configuration tables, of which only
+-   the last, the System Control Block (SCB), is used after reset-time.  The SCB
+-   has the following fields:
+-		Status word
+-		Command word
+-		Tx/Command block addr.
+-		Rx block addr.
+-   The command word accepts the following controls for the Tx and Rx units:
+-  */
+-
+-#define	CUC_START	0x0100
+-#define	CUC_RESUME	0x0200
+-#define	CUC_SUSPEND	0x0300
+-#define	RX_START	0x0010
+-#define	RX_RESUME	0x0020
+-#define	RX_SUSPEND	0x0030
+-
+-/* The Rx unit uses a list of frame descriptors and a list of data buffer
+-   descriptors.  We use full-sized (1518 byte) data buffers, so there is
+-   a one-to-one pairing of frame descriptors to buffer descriptors.
+-
+-   The Tx ("command") unit executes a list of commands that look like:
+-	Status word	Written by the 82586 when the command is done.
+-	Command word	Command in lower 3 bits, post-command action in upper 3
+-	Link word	The address of the next command.
+-	Parameters	(as needed).
+-
+-	Some definitions related to the Command Word are:
+- */
+-#define CMD_EOL		0x8000		/* The last command of the list, stop. */
+-#define CMD_SUSP	0x4000		/* Suspend after doing cmd. */
+-#define CMD_INTR	0x2000		/* Interrupt after doing cmd. */
+-
+-enum commands {
+-	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
+-	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7};
+-
+-/*
+-		Details of the EtherLink16 Implementation
+-
+-  The 3c507 and NI5210 are generic shared-memory i82586 implementations.
+-  3c507: The host can map 16K, 32K, 48K, or 64K of the 64K memory into
+-  0x0[CD][08]0000, or all 64K into 0xF[02468]0000.
+-  NI5210: The host can map 8k or 16k at 0x[CDE][048C]000 but we
+-  assume 8k because to have 16k you cannot put a ROM on the NIC.
+-  */
+-
+-/* Offsets from the base I/O address. */
+-
+-#ifdef	INCLUDE_3C507
+-
+-#define	SA_DATA		0	/* Station address data, or 3Com signature. */
+-#define MISC_CTRL	6	/* Switch the SA_DATA banks, and bus config bits. */
+-#define RESET_IRQ	10	/* Reset the latched IRQ line. */
+-#define I82586_ATTN	11	/* Frob the 82586 Channel Attention line. */
+-#define ROM_CONFIG	13
+-#define MEM_CONFIG	14
+-#define IRQ_CONFIG	15
+-#define EL16_IO_EXTENT	16
+-
+-/* The ID port is used at boot-time to locate the ethercard. */
+-#define ID_PORT		0x100
+-
+-#endif
+-
+-#ifdef	INCLUDE_NI5210
+-
+-#define	NI52_RESET	0  /* writing to this address, resets the i82586 */
+-#define	I82586_ATTN	1  /* channel attention, kick the 586 */
+-
+-#endif
+-
+-#ifdef	INCLUDE_EXOS205
+-
+-#define	EXOS205_RESET	0  /* writing to this address, resets the i82586 */
+-#define	I82586_ATTN	1  /* channel attention, kick the 586 */
+-
+-#endif
+-
+-/* Offsets to registers in the mailbox (SCB). */
+-#define iSCB_STATUS	0x8
+-#define iSCB_CMD	0xA
+-#define iSCB_CBL	0xC	/* Command BLock offset. */
+-#define iSCB_RFA	0xE	/* Rx Frame Area offset. */
+-
+-/*  Since the 3c507 maps the shared memory window so that the last byte is
+-at 82586 address FFFF, the first byte is at 82586 address 0, 16K, 32K, or
+-48K corresponding to window sizes of 64K, 48K, 32K and 16K respectively.
+-We can account for this be setting the 'SBC Base' entry in the ISCP table
+-below for all the 16 bit offset addresses, and also adding the 'SCB Base'
+-value to all 24 bit physical addresses (in the SCP table and the TX and RX
+-Buffer Descriptors).
+-				-Mark
+-*/
+-
+-/*
+-  What follows in 'init_words[]' is the "program" that is downloaded to the
+-  82586 memory.  It's mostly tables and command blocks, and starts at the
+-  reset address 0xfffff6.  This is designed to be similar to the EtherExpress,
+-  thus the unusual location of the SCB at 0x0008.
+-
+-  Even with the additional "don't care" values, doing it this way takes less
+-  program space than initializing the individual tables, and I feel it's much
+-  cleaner.
+-
+-  The databook is particularly useless for the first two structures, I had
+-  to use the Crynwr driver as an example.
+-
+-  The memory setup is as follows:
+-*/
+-
+-#define CONFIG_CMD	0x18
+-#define SET_SA_CMD	0x24
+-#define SA_OFFSET	0x2A
+-#define IDLELOOP	0x30
+-#define TDR_CMD		0x38
+-#define TDR_TIME	0x3C
+-#define DUMP_CMD	0x40
+-#define DIAG_CMD	0x48
+-#define SET_MC_CMD	0x4E
+-#define DUMP_DATA	0x56	/* A 170 byte buffer for dump and Set-MC into. */
+-
+-#define TX_BUF_START	0x0100
+-#define TX_BUF_SIZE	(1518+14+20+16) /* packet+header+TBD */
+-
+-#define RX_BUF_START	0x1000
+-#define RX_BUF_SIZE	(1518+14+18)	/* packet+header+RBD */
+-#define RX_BUF_END	(mem_end - mem_start - 20)
+-
+-/*
+-  That's it: only 86 bytes to set up the beast, including every extra
+-  command available.  The 170 byte buffer at DUMP_DATA is shared between the
+-  Dump command (called only by the diagnostic program) and the SetMulticastList
+-  command.
+-
+-  To complete the memory setup you only have to write the station address at
+-  SA_OFFSET and create the Tx & Rx buffer lists.
+-
+-  The Tx command chain and buffer list is setup as follows:
+-  A Tx command table, with the data buffer pointing to...
+-  A Tx data buffer descriptor.  The packet is in a single buffer, rather than
+-	chaining together several smaller buffers.
+-  A NoOp command, which initially points to itself,
+-  And the packet data.
+-
+-  A transmit is done by filling in the Tx command table and data buffer,
+-  re-writing the NoOp command, and finally changing the offset of the last
+-  command to point to the current Tx command.  When the Tx command is finished,
+-  it jumps to the NoOp, when it loops until the next Tx command changes the
+-  "link offset" in the NoOp.  This way the 82586 never has to go through the
+-  slow restart sequence.
+-
+-  The Rx buffer list is set up in the obvious ring structure.  We have enough
+-  memory (and low enough interrupt latency) that we can avoid the complicated
+-  Rx buffer linked lists by alway associating a full-size Rx data buffer with
+-  each Rx data frame.
+-
+-  I currently use one transmit buffer starting at TX_BUF_START (0x0100), and
+-  use the rest of memory, from RX_BUF_START to RX_BUF_END, for Rx buffers.
+-
+-  */
+-
+-static unsigned short init_words[] = {
+-	/*	System Configuration Pointer (SCP). */
+-#if	defined(INCLUDE_3C507)
+-	0x0000,					/* Set bus size to 16 bits. */
+-#else
+-	0x0001,					/* Set bus size to 8 bits */
+-#endif
+-	0,0,					/* pad words. */
+-	0x0000,0x0000,				/* ISCP phys addr, set in init_82586_mem(). */
+-
+-	/*	Intermediate System Configuration Pointer (ISCP). */
+-	0x0001,					/* Status word that's cleared when init is done. */
+-	0x0008,0,0,				/* SCB offset, (skip, skip) */
+-
+-	/* System Control Block (SCB). */
+-	0,0xf000|RX_START|CUC_START,		/* SCB status and cmd. */
+-	CONFIG_CMD,				/* Command list pointer, points to Configure. */
+-	RX_BUF_START,				/* Rx block list. */
+-	0,0,0,0,				/* Error count: CRC, align, buffer, overrun. */
+-
+-	/* 0x0018: Configure command.  Change to put MAC data with packet. */
+-	0, CmdConfigure,			/* Status, command. */
+-	SET_SA_CMD,				/* Next command is Set Station Addr. */
+-	0x0804,					/* "4" bytes of config data, 8 byte FIFO. */
+-	0x2e40,					/* Magic values, including MAC data location. */
+-	0,					/* Unused pad word. */
+-
+-	/* 0x0024: Setup station address command. */
+-	0, CmdSASetup,
+-	SET_MC_CMD,				/* Next command. */
+-	0xaa00,0xb000,0x0bad,	/* Station address (to be filled in) */
+-
+-	/* 0x0030: NOP, looping back to itself.  Point to first Tx buffer to Tx. */
+-	0, CmdNOp, IDLELOOP, 0 /* pad */,
+-
+-	/* 0x0038: A unused Time-Domain Reflectometer command. */
+-	0, CmdTDR, IDLELOOP, 0,
+-
+-	/* 0x0040: An unused Dump State command. */
+-	0, CmdDump, IDLELOOP, DUMP_DATA,
+-
+-	/* 0x0048: An unused Diagnose command. */
+-	0, CmdDiagnose, IDLELOOP,
+-
+-	/* 0x004E: An empty set-multicast-list command. */
+-	0, CmdMulticastList, IDLELOOP, 0,
+-};
+-
+-/* NIC specific static variables go here */
+-
+-static unsigned short		ioaddr, irq, scb_base;
+-static Address			mem_start, mem_end;
+-static unsigned short		rx_head, rx_tail;
+-
+-#define	read_mem(m,s)	fmemcpy((char *)s, m, sizeof(s))
+-
+-static void setup_rx_buffers(struct nic *nic)
+-{
+-	Address			write_ptr;
+-	unsigned short		cur_rx_buf;
+-	static unsigned short	rx_cmd[16] = {
+-		0x0000,			/* Rx status */
+-		0x0000,			/* Rx command, only and last */
+-		RX_BUF_START,		/* Link (will be adjusted) */
+-		RX_BUF_START + 22,	/* Buffer offset (will be adjusted) */
+-		0x0000, 0x0000, 0x0000,	/* Pad for dest addr */
+-		0x0000, 0x0000, 0x0000,	/* Pad for source addr */
+-		0x0000,			/* Pad for protocol */
+-		0x0000,			/* Buffer: Actual count */
+-		-1,			/* Buffer: Next (none) */
+-		RX_BUF_START + 0x20,	/* Buffer: Address low (+ scb_base) (will be adjusted) */
+-		0x0000,			/* Buffer: Address high */
+-		0x8000 | (RX_BUF_SIZE - 0x20)
+-	};
+-
+-	cur_rx_buf = rx_head = RX_BUF_START;
+-	do {		/* While there is room for one more buffer */
+-		write_ptr = mem_start + cur_rx_buf;
+-		/* adjust some contents */
+-		rx_cmd[1] = 0x0000;
+-		rx_cmd[2] = cur_rx_buf + RX_BUF_SIZE;
+-		rx_cmd[3] = cur_rx_buf + 22;
+-		rx_cmd[13] = cur_rx_buf + 0x20 + scb_base;
+-		memcpy((char *)write_ptr, (char *)rx_cmd, sizeof(rx_cmd));
+-		rx_tail = cur_rx_buf;
+-		cur_rx_buf += RX_BUF_SIZE;
+-	} while (cur_rx_buf <= RX_BUF_END - RX_BUF_SIZE);
+-	/* Terminate the list by setting the EOL bit and wrap ther pointer
+-	   to make the list a ring. */
+-	write_ptr = mem_start + rx_tail;
+-	rx_cmd[1] = 0xC000;
+-	rx_cmd[2] = rx_head;
+-	memcpy((char *)write_ptr, (char *)rx_cmd, sizeof(unsigned short) * 3);
+-}
+-
+-static void ack_status(void)
+-{
+-	unsigned short	cmd, status;
+-	unsigned short	*shmem = (short *)mem_start;
+-
+-	cmd = (status = shmem[iSCB_STATUS>>1]) & 0xf000;
+-	if (status & 0x100)		/* CU suspended? */
+-		cmd |= CUC_RESUME;
+-	if ((status & 0x200) == 0)	/* CU not active? */
+-		cmd |= CUC_START;
+-	if (status & 0x010)		/* RU suspended? */
+-		cmd |= RX_RESUME;
+-	else if ((status & 0x040) == 0)	/* RU not active? */
+-		cmd |= RX_START;
+-	if (cmd == 0)			/* Nothing to do */
+-		return;
+-	shmem[iSCB_CMD>>1] = cmd;
+-#if	defined(DEBUG)
+-	printf("Status %hX Command %hX\n", status, cmd);
+-#endif
+-	outb(0, ioaddr + I82586_ATTN);
+-}
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-
+-static void i82586_reset(struct nic *nic)
+-{
+-	unsigned long	time;
+-	unsigned short	*shmem = (short *)mem_start;
+-
+-	/* put the card in its initial state */
+-
+-#ifdef	INCLUDE_3C507
+-	/* Enable loopback to protect the wire while starting up,
+-	   and hold the 586 in reset during the memory initialisation. */
+-	outb(0x20, ioaddr + MISC_CTRL);
+-#endif
+-
+-	/* Fix the ISCP address and base. */
+-	init_words[3] = scb_base;
+-	init_words[7] = scb_base;
+-
+-	/* Write the words at 0xfff6. */
+-	/* Write the words at 0x0000. */
+-	/* Fill in the station address. */
+-	memcpy((char *)(mem_end - 10), (char *)init_words, 10);
+-	memcpy((char *)mem_start, (char *)&init_words[5], sizeof(init_words) - 10);
+-	memcpy((char *)mem_start + SA_OFFSET, nic->node_addr, ETH_ALEN);
+-	setup_rx_buffers(nic);
+-
+-#ifdef	INCLUDE_3C507
+-	/* Start the 586 by releasing the reset line, but leave loopback. */
+-	outb(0xA0, ioaddr + MISC_CTRL);
+-#endif
+-
+-	/* This was time consuming to track down; you need to give two channel
+-	   attention signals to reliably start up the i82586. */
+-	outb(0, ioaddr + I82586_ATTN);
+-	time = currticks() + TICKS_PER_SEC;	/* allow 1 second to init */
+-	while (
+-			shmem[iSCB_STATUS>>1] == 0)
+-	{
+-		if (currticks() > time)
+-		{
+-			printf("i82586 initialisation timed out with status %hX, cmd %hX\n",
+-					shmem[iSCB_STATUS>>1], shmem[iSCB_CMD>>1]);
+-			break;
+-		}
+-	}
+-	/* Issue channel-attn -- the 82586 won't start. */
+-	outb(0, ioaddr + I82586_ATTN);
+-
+-#ifdef	INCLUDE_3C507
+-	/* Disable loopback. */
+-	outb(0x80, ioaddr + MISC_CTRL);
+-#endif
+-#if	defined(DEBUG)
+-	printf("i82586 status %hX, cmd %hX\n",
+-			shmem[iSCB_STATUS>>1], shmem[iSCB_CMD>>1]);
+-#endif
+-}
+-
+-/**************************************************************************
+-  POLL - Wait for a frame
+- ***************************************************************************/
+-static int i82586_poll(struct nic *nic)
+-{
+-	int		status;
+-	unsigned short	rfd_cmd, next_rx_frame, data_buffer_addr,
+-	frame_status, pkt_len;
+-	unsigned short	*shmem = (short *)mem_start + rx_head;
+-
+-	/* return true if there's an ethernet packet ready to read */
+-	if (
+-			((frame_status = shmem[0]) & 0x8000) == 0)
+-		return (0);		/* nope */
+-	rfd_cmd = shmem[1];
+-	next_rx_frame = shmem[2];
+-	data_buffer_addr = shmem[3];
+-	pkt_len = shmem[11];
+-	status = 0;
+-	if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
+-			|| (pkt_len & 0xC000) != 0xC000)
+-		printf("\nRx frame corrupt, discarded");
+-	else if ((frame_status & 0x2000) == 0)
+-		printf("\nRx frame had error");
+-	else
+-	{
+-		/* We have a frame, copy it to our buffer */
+-		pkt_len &= 0x3FFF;
+-		memcpy(nic->packet, (char *)mem_start + rx_head + 0x20, pkt_len);
+-		/* Only packets not from ourself */
+-		if (memcmp(nic->packet + ETH_ALEN, nic->node_addr, ETH_ALEN) != 0)
+-		{
+-			nic->packetlen = pkt_len;
+-			status = 1;
+-		}
+-	}
+-	/* Clear the status word and set EOL on Rx frame */
+-	shmem[0] = 0;
+-	shmem[1] = 0xC000;
+-	*(short *)(mem_start + rx_tail + 2) = 0;
+-	rx_tail = rx_head;
+-	rx_head = next_rx_frame;
+-	ack_status();
+-	return (status);
+-}
+-
+-/**************************************************************************
+-  TRANSMIT - Transmit a frame
+- ***************************************************************************/
+-static void i82586_transmit(
+-		struct nic *nic,
+-		const char *d,			/* Destination */
+-		unsigned int t,			/* Type */
+-		unsigned int s,			/* size */
+-		const char *p)			/* Packet */
+-{
+-	Address			bptr;
+-	unsigned short		type, z;
+-	static unsigned short	tx_cmd[11] = {
+-		0x0,			/* Tx status */
+-		CmdTx,			/* Tx command */
+-		TX_BUF_START+16,	/* Next command is a NoOp */
+-		TX_BUF_START+8,		/* Data Buffer offset */
+-		0x8000,			/* | with size */
+-		0xffff,			/* No next data buffer */
+-		TX_BUF_START+22,	/* + scb_base */
+-		0x0,			/* Buffer address high bits (always zero) */
+-		0x0,			/* Nop status */
+-		CmdNOp,			/* Nop command */
+-		TX_BUF_START+16		/* Next is myself */
+-	};
+-	unsigned short	*shmem = (short *)mem_start + TX_BUF_START;
+-
+-	/* send the packet to destination */
+-	/* adjust some contents */
+-	type = htons(t);
+-	if (s < ETH_ZLEN)
+-		s = ETH_ZLEN;
+-	tx_cmd[4] = (s + ETH_HLEN) | 0x8000;
+-	tx_cmd[6] = TX_BUF_START + 22 + scb_base;
+-	bptr = mem_start + TX_BUF_START;
+-	memcpy((char *)bptr, (char *)tx_cmd, sizeof(tx_cmd));
+-	bptr += sizeof(tx_cmd);
+-	memcpy((char *)bptr, d, ETH_ALEN);
+-	bptr += ETH_ALEN;
+-	memcpy((char *)bptr, nic->node_addr, ETH_ALEN);
+-	bptr += ETH_ALEN;
+-	memcpy((char *)bptr, (char *)&type, sizeof(type));
+-	bptr += sizeof(type);
+-	memcpy((char *)bptr, p, s);
+-	/* Change the offset in the IDLELOOP */
+-	*(unsigned short *)(mem_start + IDLELOOP + 4) = TX_BUF_START;
+-	/* Wait for transmit completion */
+-	while (
+-			(shmem[0] & 0x2000) == 0)
+-		;
+-	/* Change the offset in the IDLELOOP back and
+-	   change the final loop to point here */
+-	*(unsigned short *)(mem_start + IDLELOOP + 4) = IDLELOOP;
+-	*(unsigned short *)(mem_start + TX_BUF_START + 20) = IDLELOOP;
+-	ack_status();
+-}
+-
+-/**************************************************************************
+-  DISABLE - Turn off ethernet interface
+- ***************************************************************************/
+-static void i82586_disable(struct nic *nic)
+-{
+-	unsigned short	*shmem = (short *)mem_start;
+-
+-#if	0
+-	/* Flush the Tx and disable Rx. */
+-	shmem[iSCB_CMD>>1] = RX_SUSPEND | CUC_SUSPEND;
+-	outb(0, ioaddr + I82586_ATTN);
+-#ifdef	INCLUDE_NI5210
+-	outb(0, ioaddr + NI52_RESET);
+-#endif
+-#endif	/* 0 */
+-}
+-
+-#ifdef	INCLUDE_3C507
+-
+-static int t507_probe1(struct nic *nic, unsigned short ioaddr)
+-{
+-	int			i;
+-	Address			size;
+-	char			mem_config;
+-	char			if_port;
+-
+-	if (inb(ioaddr) != '*' || inb(ioaddr+1) != '3'
+-		|| inb(ioaddr+2) != 'C' || inb(ioaddr+3) != 'O')
+-		return (0);
+-	irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
+-	mem_config = inb(ioaddr + MEM_CONFIG);
+-	if (mem_config & 0x20)
+-	{
+-		size = 65536L;
+-		mem_start = 0xf00000L + (mem_config & 0x08 ? 0x080000L
+-			: (((Address)mem_config & 0x3) << 17));
+-	}
+-	else
+-	{
+-		size = ((((Address)mem_config & 0x3) + 1) << 14);
+-		mem_start = 0x0c0000L + (((Address)mem_config & 0x18) << 12);
+-	}
+-	mem_end = mem_start + size;
+-	scb_base = 65536L - size;
+-	if_port = inb(ioaddr + ROM_CONFIG) & 0x80;
+-	/* Get station address */
+-	outb(0x01, ioaddr + MISC_CTRL);
+-	for (i = 0; i < ETH_ALEN; ++i)
+-	{
+-		nic->node_addr[i] = inb(ioaddr+i);
+-	}
+-	printf("\n3c507 ioaddr %#hX, IRQ %d, mem [%#X-%#X], %sternal xcvr, addr %!\n",
+-		ioaddr, irq, mem_start, mem_end, if_port ? "in" : "ex", nic->node_addr);
+-	return (1);
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-
+-struct nic *t507_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	static unsigned char	init_ID_done = 0;
+-	unsigned short		lrs_state = 0xff;
+-	static unsigned short	io_addrs[] = { 0x300, 0x320, 0x340, 0x280, 0 };
+-	unsigned short		*p;
+-	int			i;
+-
+-	if (init_ID_done == 0)
+-	{
+-		/* Send the ID sequence to the ID_PORT to enable the board */
+-		outb(0x00, ID_PORT);
+-		for (i = 0; i < 255; ++i)
+-		{
+-			outb(lrs_state, ID_PORT);
+-			lrs_state <<= 1;
+-			if (lrs_state & 0x100)
+-				lrs_state ^= 0xe7;
+-		}
+-		outb(0x00, ID_PORT);
+-		init_ID_done = 1;
+-	}
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	if (probe_addrs == 0)
+-		probe_addrs = io_addrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
+-		if (t507_probe1(nic, ioaddr))
+-			break;
+-	if (ioaddr != 0)
+-	{
+-		/* point to NIC specific routines */
+-		i82586_reset(nic);
+-		nic->reset = i82586_reset;
+-		nic->poll = i82586_poll;
+-		nic->transmit = i82586_transmit;
+-		nic->disable = i82586_disable;
+-		return nic;
+-	}
+-	/* else */
+-	{
+-		return 0;
+-	}
+-}
+-
+-#endif
+-
+-#ifdef	INCLUDE_NI5210
+-
+-static int ni5210_probe2(void)
+-{
+-	unsigned short		i;
+-	unsigned short		shmem[10];
+-
+-	/* Fix the ISCP address and base. */
+-	init_words[3] = scb_base;
+-	init_words[7] = scb_base;
+-
+-	/* Write the words at 0xfff6. */
+-	/* Write the words at 0x0000. */
+-	memcpy((char *)(mem_end - 10), (char *)init_words, 10);
+-	memcpy((char *)mem_start, (char *)&init_words[5], sizeof(init_words) - 10);
+-	if (*(unsigned short *)mem_start != 1)
+-		return (0);
+-	outb(0, ioaddr + NI52_RESET);
+-	outb(0, ioaddr + I82586_ATTN);
+-	udelay(32);
+-	i = 50;
+-	while (
+-		shmem[iSCB_STATUS>>1] == 0)
+-	{
+-		if (--i == 0)
+-		{
+-			printf("i82586 initialisation timed out with status %hX, cmd %hX\n",
+-				shmem[iSCB_STATUS>>1], shmem[iSCB_CMD>>1]);
+-			break;
+-		}
+-	}
+-	/* Issue channel-attn -- the 82586 won't start. */
+-	outb(0, ioaddr + I82586_ATTN);
+-	if (*(unsigned short *)mem_start != 0)
+-		return (0);
+-	return (1);
+-}
+-
+-static int ni5210_probe1(struct nic *nic)
+-{
+-	int			i;
+-	static Address		mem_addrs[] = {
+-		0xc0000, 0xc4000, 0xc8000, 0xcc000,
+-		0xd0000, 0xd4000, 0xd8000, 0xdc000,
+-		0xe0000, 0xe4000, 0xe8000, 0xec000,
+-		0 };
+-	Address			*p;
+-
+-	if (inb(ioaddr + 6) != 0x0 || inb(ioaddr + 7) != 0x55)
+-		return (0);
+-	scb_base = -8192;		/* assume 8k memory */
+-	for (p = mem_addrs; (mem_start = *p) != 0; ++p)
+-		if (mem_end = mem_start + 8192, ni5210_probe2())
+-			break;
+-	if (mem_start == 0)
+-		return (0);
+-	/* Get station address */
+-	for (i = 0; i < ETH_ALEN; ++i)
+-	{
+-		nic->node_addr[i] = inb(ioaddr+i);
+-	}
+-	printf("\nNI5210 ioaddr %#hX, mem [%#X-%#X], addr %!\n",
+-		ioaddr, mem_start, mem_end, nic->node_addr);
+-	return (1);
+-}
+-
+-struct nic *ni5210_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	/* missing entries are addresses usually already used */
+-	static unsigned short	io_addrs[] = {
+-		0x200, 0x208, 0x210, 0x218, 0x220, 0x228, 0x230, 0x238,
+-		0x240, 0x248, 0x250, 0x258, 0x260, 0x268, 0x270, /*Par*/
+-		0x280, 0x288, 0x290, 0x298, 0x2A0, 0x2A8, 0x2B0, 0x2B8,
+-		0x2C0, 0x2C8, 0x2D0, 0x2D8, 0x2E0, 0x2E8, 0x2F0, /*Ser*/
+-		0x300, 0x308, 0x310, 0x318, 0x320, 0x328, 0x330, 0x338,
+-		0x340, 0x348, 0x350, 0x358, 0x360, 0x368, 0x370, /*Par*/
+-		0x380, 0x388, 0x390, 0x398, 0x3A0, 0x3A8, /*Vid,Par*/
+-		0x3C0, 0x3C8, 0x3D0, 0x3D8, 0x3E0, 0x3E8, /*Ser*/
+-		0x0
+-	};
+-	unsigned short		*p;
+-	int			i;
+-
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	if (probe_addrs == 0)
+-		probe_addrs = io_addrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
+-		if (ni5210_probe1(nic))
+-			break;
+-	if (ioaddr != 0)
+-	{
+-		/* point to NIC specific routines */
+-		i82586_reset(nic);
+-		nic->reset = i82586_reset;
+-		nic->poll = i82586_poll;
+-		nic->transmit = i82586_transmit;
+-		nic->disable = i82586_disable;
+-		return nic;
+-	}
+-	/* else */
+-	{
+-		return 0;
+-	}
+-}
+-#endif
+-
+-#ifdef	INCLUDE_EXOS205
+-
+-/*
+- * Code to download to I186 in EXOS205
+- */
+-
+-static unsigned char exos_i186_init[] =
+-{
+-0x08,0x00,0x14,0x00,0x00,0x00,0xaa,0xfa,0x33,0xc0,0xba,0xfe,0xff,0xef,0xb8,0xf8,
+-0xff,0xe7,0xa0,0xb8,0x7c,0x00,0xe7,0xa4,0xb8,0xbc,0x80,0xe7,0xa8,0x8c,0xc8,0x8e,
+-0xd8,0xbb,0x2f,0x0e,0xc6,0x07,0xa5,0x33,0xc9,0xeb,0x00,0xeb,0x00,0xeb,0x00,0xe2,
+-0xf8,0xbe,0x2c,0x0e,0xba,0x02,0x05,0x33,0xdb,0xb9,0x03,0x00,0xec,0x24,0x0f,0x8a,
+-0xe0,0x02,0xd8,0x42,0x42,0xec,0x02,0xd8,0xd0,0xe0,0xd0,0xe0,0xd0,0xe0,0xd0,0xe0,
+-0x0a,0xc4,0x88,0x04,0x42,0x42,0x46,0xe2,0xe3,0x8a,0xe3,0xd0,0xec,0xd0,0xec,0xd0,
+-0xec,0xd0,0xec,0x80,0xe3,0x0f,0x02,0xe3,0x80,0xf4,0x05,0xec,0x3a,0xe0,0x74,0x05,
+-0xc6,0x04,0x5a,0xeb,0xfe,0xc6,0x04,0x55,0x33,0xc0,0x8e,0xd8,0xbe,0x38,0x00,0xc7,
+-0x04,0xce,0x0e,0x46,0x46,0xc7,0x04,0x00,0xff,0xfb,0xba,0x3c,0x00,0xb8,0x03,0x00,
+-0xef,0x33,0xdb,0x33,0xc9,0xbd,0x04,0x0f,0x90,0x90,0x90,0x90,0xe2,0xfa,0x43,0x2e,
+-0x89,0x5e,0x00,0xeb,0xf3,0x52,0xba,0x00,0x06,0xef,0x50,0x53,0x55,0xbd,0xf8,0x0e,
+-0x2e,0x8b,0x5e,0x00,0x43,0x2e,0x89,0x5e,0x00,0xba,0x22,0x00,0xb8,0x00,0x80,0xef,
+-0x5d,0x5b,0x58,0x5a,0xcf,0x49,0x4e,0x54,0x52,0x20,0x63,0x6e,0x74,0x2d,0x3e,0x00,
+-0x00,0x4c,0x4f,0x4f,0x50,0x20,0x63,0x6e,0x74,0x2d,0x3e,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xea,0x30,0x0e,0x00,0xff,0x00,0x00,0x00,0x00,
+-0x00,0x00,0x00,0x00,0x00,0x00,00
+-};
+-
+-/* These offsets are from the end of the i186 download code */
+-
+-#define	OFFSET_SEMA		0x1D1
+-#define	OFFSET_ADDR		0x1D7
+-
+-static int exos205_probe2(void)
+-{
+-	unsigned short		i;
+-	unsigned short		shmem[10];
+-
+-	/* Fix the ISCP address and base. */
+-	init_words[3] = scb_base;
+-	init_words[7] = scb_base;
+-
+-	/* Write the words at 0xfff6. */
+-	/* Write the words at 0x0000. */
+-	memcpy((char *)(mem_end - 10), (char *)init_words, 10);
+-	memcpy((char *)mem_start, (char *)&init_words[5], sizeof(init_words) - 10);
+-	if (*(unsigned short *)mem_start != 1)
+-		return (0);
+-	outb(0, ioaddr + EXOS205_RESET);
+-	outb(0, ioaddr + I82586_ATTN);
+-	i = 50;
+-	while (
+-		shmem[iSCB_STATUS>>1] == 0)
+-	{
+-		if (--i == 0)
+-		{
+-			printf("i82586 initialisation timed out with status %hX, cmd %hX\n",
+-				shmem[iSCB_STATUS>>1], shmem[iSCB_CMD>>1]);
+-			break;
+-		}
+-	}
+-	/* Issue channel-attn -- the 82586 won't start. */
+-	outb(0, ioaddr + I82586_ATTN);
+-	if (*(unsigned short *)mem_start != 0)
+-		return (0);
+-	return (1);
+-}
+-
+-static int exos205_probe1(struct nic *nic)
+-{
+-	int			i;
+-	/* If you know the other addresses please let me know */
+-	static Address		mem_addrs[] = {
+-		0xcc000, 0 };
+-	Address			*p;
+-
+-	scb_base = -16384;		/* assume 8k memory */
+-	for (p = mem_addrs; (mem_start = *p) != 0; ++p)
+-		if (mem_end = mem_start + 16384, exos205_probe2())
+-			break;
+-	if (mem_start == 0)
+-		return (0);
+-	/* Get station address */
+-	for (i = 0; i < ETH_ALEN; ++i)
+-	{
+-		nic->node_addr[i] = inb(ioaddr+i);
+-	}
+-	printf("\nEXOS205 ioaddr %#hX, mem [%#X-%#X], addr %!\n",
+-		ioaddr, mem_start, mem_end, nic->node_addr);
+-	return (1);
+-}
+-
+-struct nic *exos205_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	/* If you know the other addresses, please let me know */
+-	static unsigned short	io_addrs[] = {
+-		0x310, 0x0
+-	};
+-	unsigned short		*p;
+-	int			i;
+-
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	if (probe_addrs == 0)
+-		probe_addrs = io_addrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
+-		if (exos205_probe1(nic))
+-			break;
+-	if (ioaddr != 0)
+-	{
+-		/* point to NIC specific routines */
+-		i82586_reset(nic);
+-		nic->reset = i82586_reset;
+-		nic->poll = i82586_poll;
+-		nic->transmit = i82586_transmit;
+-		nic->disable = i82586_disable;
+-		return nic;
+-	}
+-	/* else */
+-	{
+-		return 0;
+-	}
+-}
+-
+-#endif
+diff -Naur grub-0.97.orig/netboot/if_arp.h grub-0.97/netboot/if_arp.h
+--- grub-0.97.orig/netboot/if_arp.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/if_arp.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,29 @@
++#ifndef	_IF_ARP_H
++#define	_IF_ARP_H
++
++#include "types.h"
++
++#define ARP_REQUEST	1
++#define ARP_REPLY	2
++
++#ifndef	MAX_ARP_RETRIES
++#define MAX_ARP_RETRIES		20
++#endif
++
++/*
++ * A pity sipaddr and tipaddr are not longword aligned or we could use
++ * in_addr. No, I don't want to use #pragma packed.
++ */
++struct arprequest {
++	uint16_t hwtype;
++	uint16_t protocol;
++	uint8_t  hwlen;
++	uint8_t  protolen;
++	uint16_t opcode;
++	uint8_t  shwaddr[6];
++	uint8_t  sipaddr[4];
++	uint8_t  thwaddr[6];
++	uint8_t  tipaddr[4];
++};
++
++#endif	/* _IF_ARP_H */
+diff -Naur grub-0.97.orig/netboot/if_ether.h grub-0.97/netboot/if_ether.h
+--- grub-0.97.orig/netboot/if_ether.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/if_ether.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,21 @@
++#ifndef	_IF_ETHER_H
++#define	_IF_ETHER_H
++
++/*
++   I'm moving towards the defined names in linux/if_ether.h for clarity.
++   The confusion between 60/64 and 1514/1518 arose because the NS8390
++   counts the 4 byte frame checksum in the incoming packet, but not
++   in the outgoing packet. 60/1514 are the correct numbers for most
++   if not all of the other NIC controllers.
++*/
++
++#define ETH_ALEN		6	/* Size of Ethernet address */
++#define ETH_HLEN		14	/* Size of ethernet header */
++#define	ETH_ZLEN		60	/* Minimum packet */
++#define	ETH_FRAME_LEN		1514	/* Maximum packet */
++#define ETH_DATA_ALIGN		2	/* Amount needed to align the data after an ethernet header */
++#ifndef	ETH_MAX_MTU
++#define	ETH_MAX_MTU		(ETH_FRAME_LEN-ETH_HLEN)
++#endif
++
++#endif	/* _IF_ETHER_H */
+diff -Naur grub-0.97.orig/netboot/igmp.h grub-0.97/netboot/igmp.h
+--- grub-0.97.orig/netboot/igmp.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/igmp.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,27 @@
++#ifndef	_IGMP_H
++#define	_IGMP_H
++
++/* Max interval between IGMP packets */
++#define IGMP_INTERVAL			(10*TICKS_PER_SEC)
++#define IGMPv1_ROUTER_PRESENT_TIMEOUT	(400*TICKS_PER_SEC)
++
++#define IGMP_QUERY	0x11
++#define IGMPv1_REPORT	0x12
++#define IGMPv2_REPORT	0x16
++#define IGMP_LEAVE	0x17
++#define GROUP_ALL_HOSTS 0xe0000001 /* 224.0.0.1 Host byte order */
++
++struct igmp {
++	uint8_t  type;
++	uint8_t  response_time;
++	uint16_t chksum;
++	in_addr group;
++};
++
++struct igmp_ip_t { /* Format of an igmp ip packet */
++	struct iphdr ip;
++	uint8_t router_alert[4]; /* Router alert option */
++	struct igmp igmp;
++};
++
++#endif	/* _IGMP_H */
+diff -Naur grub-0.97.orig/netboot/in.h grub-0.97/netboot/in.h
+--- grub-0.97.orig/netboot/in.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/in.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,21 @@
++#ifndef	_IN_H
++#define	_IN_H
++
++#include "types.h"
++
++#define IP		0x0800
++#define ARP		0x0806
++#define	RARP		0x8035
++
++#define IP_ICMP		1
++#define IP_IGMP		2
++#define IP_UDP		17
++
++/* Same after going through htonl */
++#define IP_BROADCAST	0xFFFFFFFF
++
++typedef struct {
++	uint32_t	s_addr;
++} in_addr;
++
++#endif	/* _IN_H */
+diff -Naur grub-0.97.orig/netboot/io.h grub-0.97/netboot/io.h
+--- grub-0.97.orig/netboot/io.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/io.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,239 @@
++#ifndef	IO_H
++#define IO_H
++
++
++/* Amount of relocation etherboot is experiencing */
++extern unsigned long virt_offset;
++
++/* Don't require identity mapped physical memory,
++ * osloader.c is the only valid user at the moment.
++ */
++unsigned long virt_to_phys(volatile const void *virt_addr);
++void *phys_to_virt(unsigned long phys_addr);
++
++/* virt_to_bus converts an addresss inside of etherboot [_start, _end]
++ * into a memory access cards can use.
++ */
++#define virt_to_bus virt_to_phys
++
++
++/* bus_to_virt reverses virt_to_bus, the address must be output
++ * from virt_to_bus to be valid.  This function does not work on
++ * all bus addresses.
++ */
++#define bus_to_virt phys_to_virt
++
++/* ioremap converts a random 32bit bus address into something
++ * etherboot can access.
++ */
++static inline void *ioremap(unsigned long bus_addr, unsigned long length __unused)
++{
++	return bus_to_virt(bus_addr);
++}
++
++/* iounmap cleans up anything ioremap had to setup */
++static inline void iounmap(void *virt_addr __unused)
++{
++	return;
++}
++
++/*
++ * This file contains the definitions for the x86 IO instructions
++ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
++ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
++ * versions of the single-IO instructions (inb_p/inw_p/..).
++ *
++ * This file is not meant to be obfuscating: it's just complicated
++ * to (a) handle it all in a way that makes gcc able to optimize it
++ * as well as possible and (b) trying to avoid writing the same thing
++ * over and over again with slight variations and possibly making a
++ * mistake somewhere.
++ */
++
++/*
++ * Thanks to James van Artsdalen for a better timing-fix than
++ * the two short jumps: using outb's to a nonexistent port seems
++ * to guarantee better timings even on fast machines.
++ *
++ * On the other hand, I'd like to be sure of a non-existent port:
++ * I feel a bit unsafe about using 0x80 (should be safe, though)
++ *
++ *		Linus
++ */
++
++#ifdef	SLOW_IO_BY_JUMPING
++#define __SLOW_DOWN_IO __asm__ __volatile__("jmp 1f\n1:\tjmp 1f\n1:")
++#else
++#define __SLOW_DOWN_IO __asm__ __volatile__("outb %al,$0x80")
++#endif
++
++#ifdef	REALLY_SLOW_IO
++#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
++#else
++#define SLOW_DOWN_IO __SLOW_DOWN_IO
++#endif
++
++/*
++ * readX/writeX() are used to access memory mapped devices. On some
++ * architectures the memory mapped IO stuff needs to be accessed
++ * differently. On the x86 architecture, we just read/write the
++ * memory location directly.
++ */
++#define readb(addr) (*(volatile unsigned char *) (addr))
++#define readw(addr) (*(volatile unsigned short *) (addr))
++#define readl(addr) (*(volatile unsigned int *) (addr))
++
++#define writeb(b,addr) ((*(volatile unsigned char *) (addr)) = (b))
++#define writew(b,addr) ((*(volatile unsigned short *) (addr)) = (b))
++#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
++
++#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
++#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
++
++/*
++ * Force strict CPU ordering.
++ * And yes, this is required on UP too when we're talking
++ * to devices.
++ *
++ * For now, "wmb()" doesn't actually do anything, as all
++ * Intel CPU's follow what Intel calls a *Processor Order*,
++ * in which all writes are seen in the program order even
++ * outside the CPU.
++ *
++ * I expect future Intel CPU's to have a weaker ordering,
++ * but I'd also expect them to finally get their act together
++ * and add some real memory barriers if so.
++ *
++ * Some non intel clones support out of order store. wmb() ceases to be a
++ * nop for these.
++ */
++ 
++#define mb() 	__asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory")
++#define rmb()	mb()
++#define wmb()	mb();
++
++
++/*
++ * Talk about misusing macros..
++ */
++
++#define __OUT1(s,x) \
++extern void __out##s(unsigned x value, unsigned short port); \
++extern inline void __out##s(unsigned x value, unsigned short port) {
++
++#define __OUT2(s,s1,s2) \
++__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
++
++#define __OUT(s,s1,x) \
++__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "d" (port)); } \
++__OUT1(s##c,x) __OUT2(s,s1,"") : : "a" (value), "id" (port)); } \
++__OUT1(s##_p,x) __OUT2(s,s1,"w") : : "a" (value), "d" (port)); SLOW_DOWN_IO; } \
++__OUT1(s##c_p,x) __OUT2(s,s1,"") : : "a" (value), "id" (port)); SLOW_DOWN_IO; }
++
++#define __IN1(s,x) \
++extern unsigned x __in##s(unsigned short port); \
++extern inline unsigned x __in##s(unsigned short port) { unsigned x _v;
++
++#define __IN2(s,s1,s2) \
++__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
++
++#define __IN(s,s1,x,i...) \
++__IN1(s,x) __IN2(s,s1,"w") : "=a" (_v) : "d" (port) ,##i ); return _v; } \
++__IN1(s##c,x) __IN2(s,s1,"") : "=a" (_v) : "id" (port) ,##i ); return _v; } \
++__IN1(s##_p,x) __IN2(s,s1,"w") : "=a" (_v) : "d" (port) ,##i ); SLOW_DOWN_IO; return _v; } \
++__IN1(s##c_p,x) __IN2(s,s1,"") : "=a" (_v) : "id" (port) ,##i ); SLOW_DOWN_IO; return _v; }
++
++#define __INS(s) \
++extern void ins##s(unsigned short port, void * addr, unsigned long count); \
++extern inline void ins##s(unsigned short port, void * addr, unsigned long count) \
++{ __asm__ __volatile__ ("cld ; rep ; ins" #s \
++: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
++
++#define __OUTS(s) \
++extern void outs##s(unsigned short port, const void * addr, unsigned long  count); \
++extern inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
++{ __asm__ __volatile__ ("cld ; rep ; outs" #s \
++: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
++
++__IN(b,"", char)
++__IN(w,"",short)
++__IN(l,"", long)
++
++__OUT(b,"b",char)
++__OUT(w,"w",short)
++__OUT(l,,int)
++
++__INS(b)
++__INS(w)
++__INS(l)
++
++__OUTS(b)
++__OUTS(w)
++__OUTS(l)
++
++/*
++ * Note that due to the way __builtin_constant_p() works, you
++ *  - can't use it inside a inline function (it will never be true)
++ *  - you don't have to worry about side effects within the __builtin..
++ */
++#define outb(val,port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__outbc((val),(port)) : \
++	__outb((val),(port)))
++
++#define inb(port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__inbc(port) : \
++	__inb(port))
++
++#define outb_p(val,port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__outbc_p((val),(port)) : \
++	__outb_p((val),(port)))
++
++#define inb_p(port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__inbc_p(port) : \
++	__inb_p(port))
++
++#define outw(val,port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__outwc((val),(port)) : \
++	__outw((val),(port)))
++
++#define inw(port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__inwc(port) : \
++	__inw(port))
++
++#define outw_p(val,port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__outwc_p((val),(port)) : \
++	__outw_p((val),(port)))
++
++#define inw_p(port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__inwc_p(port) : \
++	__inw_p(port))
++
++#define outl(val,port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__outlc((val),(port)) : \
++	__outl((val),(port)))
++
++#define inl(port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__inlc(port) : \
++	__inl(port))
++
++#define outl_p(val,port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__outlc_p((val),(port)) : \
++	__outl_p((val),(port)))
++
++#define inl_p(port) \
++((__builtin_constant_p((port)) && (port) < 256) ? \
++	__inlc_p(port) : \
++	__inl_p(port))
++
++#endif /* ETHERBOOT_IO_H */
+diff -Naur grub-0.97.orig/netboot/ip.h grub-0.97/netboot/ip.h
+--- grub-0.97.orig/netboot/ip.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/ip.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,36 @@
++#ifndef	_IP_H
++#define	_IP_H
++
++/* We need 'uint16_t' */
++#include "types.h"
++/* We need 'in_addr' */
++#include "in.h"
++
++struct iphdr {
++	uint8_t  verhdrlen;
++	uint8_t  service;
++	uint16_t len;
++	uint16_t ident;
++	uint16_t frags;
++	uint8_t  ttl;
++	uint8_t  protocol;
++	uint16_t chksum;
++	in_addr src;
++	in_addr dest;
++};
++
++extern void build_ip_hdr(unsigned long __destip, int __ttl, int __protocol, 
++			 int __option_len, int __len, const void * __buf);
++
++extern int ip_transmit(int __len, const void * __buf);
++
++extern uint16_t ipchksum(const void * __data, unsigned long __length);
++
++extern uint16_t add_ipchksums(unsigned long __offset, uint16_t __sum, 
++			      uint16_t __new);
++
++
++
++
++
++#endif	/* _IP_H */
+diff -Naur grub-0.97.orig/netboot/isa.h grub-0.97/netboot/isa.h
+--- grub-0.97.orig/netboot/isa.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/isa.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,27 @@
++#if !defined(ISA_H) && defined(CONFIG_ISA)
++#define ISA_H
++
++struct dev;
++
++#define ISAPNP_VENDOR(a,b,c)	(((((a)-'A'+1)&0x3f)<<2)|\
++				((((b)-'A'+1)&0x18)>>3)|((((b)-'A'+1)&7)<<13)|\
++				((((c)-'A'+1)&0x1f)<<8))
++
++#define	GENERIC_ISAPNP_VENDOR	ISAPNP_VENDOR('P','N','P')
++
++struct isa_driver
++{
++	int type;
++	const char *name;
++	int (*probe)(struct dev *, unsigned short *);
++	unsigned short *ioaddrs;
++};
++
++#define __isa_driver	__attribute__ ((unused,__section__(".drivers.isa")))
++extern const struct isa_driver isa_drivers[];
++extern const struct isa_driver isa_drivers_end[];
++
++#define ISA_ROM(IMAGE, DESCRIPTION)
++
++#endif /* ISA_H */
++
+diff -Naur grub-0.97.orig/netboot/lance.c grub-0.97/netboot/lance.c
+--- grub-0.97.orig/netboot/lance.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/lance.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,564 +0,0 @@
+-/**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-LANCE NIC driver for Etherboot
+-Large portions borrowed from the Linux LANCE driver by Donald Becker
+-Ken Yap, July 1997
+-***************************************************************************/
+-
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+-/* to get some global routines like printf */
+-#include "etherboot.h"
+-/* to get the interface to the body of the program */
+-#include "nic.h"
+-#ifdef	INCLUDE_LANCE
+-#include "pci.h"
+-#endif
+-#include "cards.h"
+-
+-/* Offsets from base I/O address */
+-#if	defined(INCLUDE_NE2100) || defined(INCLUDE_LANCE)
+-#define	LANCE_ETH_ADDR	0x0
+-#define	LANCE_DATA	0x10
+-#define	LANCE_ADDR	0x12
+-#define	LANCE_RESET	0x14
+-#define	LANCE_BUS_IF	0x16
+-#define	LANCE_TOTAL_SIZE	0x18
+-#endif
+-#ifdef	INCLUDE_NI6510
+-#define	LANCE_ETH_ADDR	0x8
+-#define	LANCE_DATA	0x0
+-#define	LANCE_ADDR	0x2
+-#define	LANCE_RESET	0x4
+-#define	LANCE_BUS_IF	0x6
+-#define	LANCE_TOTAL_SIZE	0x10
+-#endif
+-
+-/* lance_poll() now can use multiple Rx buffers to prevent packet loss. Set
+- * Set LANCE_LOG_RX_BUFFERS to 0..7 for 1, 2, 4, 8, 16, 32, 64 or 128 Rx
+- * buffers. Usually 4 (=16 Rx buffers) is a good value. (Andreas Neuhaus)
+- * Decreased to 2 (=4 Rx buffers) (Ken Yap, 20010305) */
+-
+-#define LANCE_LOG_RX_BUFFERS	2		/* Use 2^2=4 Rx buffers */
+-
+-#define RX_RING_SIZE		(1 << (LANCE_LOG_RX_BUFFERS))
+-#define RX_RING_MOD_MASK	(RX_RING_SIZE - 1)
+-#define RX_RING_LEN_BITS	((LANCE_LOG_RX_BUFFERS) << 29)
+-
+-struct lance_init_block
+-{
+-	unsigned short	mode;
+-	unsigned char	phys_addr[ETH_ALEN];
+-	unsigned long	filter[2];
+-	Address		rx_ring;
+-	Address		tx_ring;
+-};
+-
+-struct lance_rx_head
+-{
+-	union {
+-		Address		base;
+-		unsigned char	addr[4];
+-	} u;
+-	short		buf_length;	/* 2s complement */
+-	short		msg_length;
+-};
+-
+-struct lance_tx_head
+-{
+-	union {
+-		Address		base;
+-		unsigned char	addr[4];
+-	} u;
+-	short		buf_length;	/* 2s complement */
+-	short		misc;
+-};
+-
+-struct lance_interface
+-{
+-	struct lance_init_block	init_block;
+-	struct lance_rx_head	rx_ring[RX_RING_SIZE];
+-	struct lance_tx_head	tx_ring;
+-	unsigned char		rbuf[RX_RING_SIZE][ETH_FRAME_LEN+4];
+-	unsigned char		tbuf[ETH_FRAME_LEN];
+-	/*
+-	 * Do not alter the order of the struct members above;
+-	 * the hardware depends on the correct alignment.
+-	 */
+-	int			rx_idx;
+-};
+-
+-#define	LANCE_MUST_PAD		0x00000001
+-#define	LANCE_ENABLE_AUTOSELECT	0x00000002
+-#define	LANCE_SELECT_PHONELINE	0x00000004
+-#define	LANCE_MUST_UNRESET	0x00000008
+-
+-/* A mapping from the chip ID number to the part number and features.
+-   These are from the datasheets -- in real life the '970 version
+-   reportedly has the same ID as the '965. */
+-static const struct lance_chip_type
+-{
+-	int	id_number;
+-	const char	*name;
+-	int	flags;
+-} chip_table[] = {
+-	{0x0000, "LANCE 7990",			/* Ancient lance chip.  */
+-		LANCE_MUST_PAD + LANCE_MUST_UNRESET},
+-	{0x0003, "PCnet/ISA 79C960",		/* 79C960 PCnet/ISA.  */
+-		LANCE_ENABLE_AUTOSELECT},
+-	{0x2260, "PCnet/ISA+ 79C961",		/* 79C961 PCnet/ISA+, Plug-n-Play.  */
+-		LANCE_ENABLE_AUTOSELECT},
+-	{0x2420, "PCnet/PCI 79C970",		/* 79C970 or 79C974 PCnet-SCSI, PCI. */
+-		LANCE_ENABLE_AUTOSELECT},
+-	/* Bug: the PCnet/PCI actually uses the PCnet/VLB ID number, so just call
+-		it the PCnet32. */
+-	{0x2430, "PCnet32",			/* 79C965 PCnet for VL bus. */
+-		LANCE_ENABLE_AUTOSELECT},
+-        {0x2621, "PCnet/PCI-II 79C970A",        /* 79C970A PCInetPCI II. */
+-                LANCE_ENABLE_AUTOSELECT},
+-	{0x2625, "PCnet-FAST III 79C973",	/* 79C973 PCInet-FAST III. */
+-		LANCE_ENABLE_AUTOSELECT},
+-        {0x2626, "PCnet/HomePNA 79C978",        
+-                LANCE_ENABLE_AUTOSELECT|LANCE_SELECT_PHONELINE},
+-	{0x0, "PCnet (unknown)",
+-		LANCE_ENABLE_AUTOSELECT},
+-};
+-
+-/* Define a macro for converting program addresses to real addresses */
+-#undef	virt_to_bus
+-#define	virt_to_bus(x)		((unsigned long)x)
+-
+-static int			chip_version;
+-static int			lance_version;
+-static unsigned short		ioaddr;
+-#ifndef	INCLUDE_LANCE
+-static int			dma;
+-#endif
+-static struct lance_interface	*lp;
+-
+-/* additional 8 bytes for 8-byte alignment space */
+-#ifdef	USE_LOWMEM_BUFFER
+-#define lance ((char *)0x10000 - (sizeof(struct lance_interface)+8))
+-#else
+-static char			lance[sizeof(struct lance_interface)+8];
+-#endif
+-
+-#ifndef	INCLUDE_LANCE
+-/* DMA defines and helper routines */
+-
+-/* DMA controller registers */
+-#define DMA1_CMD_REG		0x08	/* command register (w) */
+-#define DMA1_STAT_REG		0x08	/* status register (r) */
+-#define DMA1_REQ_REG            0x09    /* request register (w) */
+-#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+-#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+-#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+-#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+-#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+-
+-#define DMA2_CMD_REG		0xD0	/* command register (w) */
+-#define DMA2_STAT_REG		0xD0	/* status register (r) */
+-#define DMA2_REQ_REG            0xD2    /* request register (w) */
+-#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+-#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+-#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+-#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+-#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+-
+-
+-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+-
+-/* enable/disable a specific DMA channel */
+-static void enable_dma(unsigned int dmanr)
+-{
+-	if (dmanr <= 3)
+-		outb_p(dmanr, DMA1_MASK_REG);
+-	else
+-		outb_p(dmanr & 3, DMA2_MASK_REG);
+-}
+-
+-static void disable_dma(unsigned int dmanr)
+-{
+-	if (dmanr <= 3)
+-		outb_p(dmanr | 4, DMA1_MASK_REG);
+-	else
+-		outb_p((dmanr & 3) | 4, DMA2_MASK_REG);
+-}
+-
+-/* set mode (above) for a specific DMA channel */
+-static void set_dma_mode(unsigned int dmanr, char mode)
+-{
+-	if (dmanr <= 3)
+-		outb_p(mode | dmanr, DMA1_MODE_REG);
+-	else
+-		outb_p(mode | (dmanr&3), DMA2_MODE_REG);
+-}
+-#endif	/* !INCLUDE_LANCE */
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void lance_reset(struct nic *nic)
+-{
+-	int		i;
+-	Address		l;
+-
+-	/* Reset the LANCE */
+-	(void)inw(ioaddr+LANCE_RESET);
+-	/* Un-Reset the LANCE, needed only for the NE2100 */
+-	if (chip_table[lance_version].flags & LANCE_MUST_UNRESET)
+-		outw(0, ioaddr+LANCE_RESET);
+-	if (chip_table[lance_version].flags & LANCE_ENABLE_AUTOSELECT)
+-	{
+-		/* This is 79C960 specific; Turn on auto-select of media
+-		   (AUI, BNC). */
+-		outw(0x2, ioaddr+LANCE_ADDR);
+-		/* Don't touch 10base2 power bit. */
+-		outw(inw(ioaddr+LANCE_BUS_IF) | 0x2, ioaddr+LANCE_BUS_IF);
+-	}
+-	/* HomePNA cards need to explicitly pick the phoneline interface.
+-	 * Some of these cards have ethernet interfaces as well, this
+-	 * code might require some modification for those.
+-  	 */
+-        if (chip_table[lance_version].flags & LANCE_SELECT_PHONELINE) {
+-                short media, check ;
+-                /* this is specific to HomePNA cards... */
+-                outw(49, ioaddr+0x12) ;
+-                media = inw(ioaddr+0x16) ;
+-#ifdef DEBUG
+-                printf("media was %d\n", media) ;
+-#endif
+-                media &= ~3 ;
+-                media |= 1 ;
+-#ifdef DEBUG
+-                printf("media changed to %d\n", media) ;
+-#endif
+-                media &= ~3 ;
+-                media |= 1 ;
+-                outw(49, ioaddr+0x12) ;
+-                outw(media, ioaddr+0x16) ;
+-                outw(49, ioaddr+0x12) ;
+-                check = inw(ioaddr+0x16) ;
+-#ifdef DEBUG
+-                printf("check %s, media was set properly\n", 
+-			check ==  media ? "passed" : "FAILED" ) ; 
+-#endif
+-	}
+- 
+-	/* Re-initialise the LANCE, and start it when done. */
+-	/* Set station address */
+-	for (i = 0; i < ETH_ALEN; ++i)
+-		lp->init_block.phys_addr[i] = nic->node_addr[i];
+-	/* Preset the receive ring headers */
+-	for (i=0; i<RX_RING_SIZE; i++) {
+-		lp->rx_ring[i].buf_length = -ETH_FRAME_LEN-4;
+-		/* OWN */
+-		lp->rx_ring[i].u.base = virt_to_bus(lp->rbuf[i]) & 0xffffff;
+-		/* we set the top byte as the very last thing */
+-		lp->rx_ring[i].u.addr[3] = 0x80;
+-	}
+-	lp->rx_idx = 0;
+-	lp->init_block.mode = 0x0;	/* enable Rx and Tx */
+-	l = (Address)virt_to_bus(&lp->init_block);
+-	outw(0x1, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw((short)l, ioaddr+LANCE_DATA);
+-	outw(0x2, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw((short)(l >> 16), ioaddr+LANCE_DATA);
+-	outw(0x4, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw(0x915, ioaddr+LANCE_DATA);
+-	outw(0x0, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw(0x4, ioaddr+LANCE_DATA);		/* stop */
+-	outw(0x1, ioaddr+LANCE_DATA);		/* init */
+-	for (i = 10000; i > 0; --i)
+-		if (inw(ioaddr+LANCE_DATA) & 0x100)
+-			break;
+-#ifdef	DEBUG
+-	if (i <= 0)
+-		printf("Init timed out\n");
+-#endif
+-	/* Apparently clearing the InitDone bit here triggers a bug
+-	   in the '974. (Mark Stockton) */
+-	outw(0x2, ioaddr+LANCE_DATA);		/* start */
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int lance_poll(struct nic *nic)
+-{
+-	int		status;
+-
+-	status = lp->rx_ring[lp->rx_idx].u.base >> 24;
+-	if (status & 0x80)
+-		return (0);
+-#ifdef	DEBUG
+-	printf("LANCE packet received rx_ring.u.base %X mcnt %hX csr0 %hX\n",
+-		lp->rx_ring[lp->rx_idx].u.base, lp->rx_ring[lp->rx_idx].msg_length,
+-		inw(ioaddr+LANCE_DATA));
+-#endif
+-	if (status == 0x3)
+-		memcpy(nic->packet, lp->rbuf[lp->rx_idx], nic->packetlen = lp->rx_ring[lp->rx_idx].msg_length);
+-	/* Andrew Boyd of QNX reports that some revs of the 79C765
+-	   clear the buffer length */
+-	lp->rx_ring[lp->rx_idx].buf_length = -ETH_FRAME_LEN-4;
+-	lp->rx_ring[lp->rx_idx].u.addr[3] |= 0x80;	/* prime for next receive */
+-
+-	/* I'm not sure if the following is still ok with multiple Rx buffers, but it works */
+-	outw(0x0, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw(0x500, ioaddr+LANCE_DATA);		/* clear receive + InitDone */
+-
+-	/* Switch to the next Rx ring buffer */
+-	lp->rx_idx = (lp->rx_idx + 1) & RX_RING_MOD_MASK;
+-
+-	return (status == 0x3);
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void lance_transmit(
+-	struct nic *nic,
+-	const char *d,			/* Destination */
+-	unsigned int t,			/* Type */
+-	unsigned int s,			/* size */
+-	const char *p)			/* Packet */
+-{
+-	unsigned long		time;
+-
+-	/* copy the packet to ring buffer */
+-	memcpy(lp->tbuf, d, ETH_ALEN);	/* dst */
+-	memcpy(&lp->tbuf[ETH_ALEN], nic->node_addr, ETH_ALEN); /* src */
+-	lp->tbuf[ETH_ALEN+ETH_ALEN] = t >> 8;	/* type */
+-	lp->tbuf[ETH_ALEN+ETH_ALEN+1] = t;	/* type */
+-	memcpy(&lp->tbuf[ETH_HLEN], p, s);
+-	s += ETH_HLEN;
+-	if (chip_table[chip_version].flags & LANCE_MUST_PAD)
+-		while (s < ETH_ZLEN)	/* pad to min length */
+-			lp->tbuf[s++] = 0;
+-	lp->tx_ring.buf_length = -s;
+-	lp->tx_ring.misc = 0x0;
+-	/* OWN, STP, ENP */
+-	lp->tx_ring.u.base = virt_to_bus(lp->tbuf) & 0xffffff;
+-	/* we set the top byte as the very last thing */
+-	lp->tx_ring.u.addr[3] = 0x83;
+-	/* Trigger an immediate send poll */
+-	outw(0x0, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);	/* as in the datasheets... */
+-	/* Klaus Espenlaub: the value below was 0x48, but that enabled the
+-	 * interrupt line, causing a hang if for some reasone the interrupt
+-	 * controller had the LANCE interrupt enabled.  I have no idea why
+-	 * nobody ran into this before...  */
+-	outw(0x08, ioaddr+LANCE_DATA);
+-	/* wait for transmit complete */
+-	time = currticks() + TICKS_PER_SEC;		/* wait one second */
+-	while (currticks() < time && (lp->tx_ring.u.base & 0x80000000) != 0)
+-		;
+-	if ((lp->tx_ring.u.base & 0x80000000) != 0)
+-		printf("LANCE timed out on transmit\n");
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw(0x200, ioaddr+LANCE_DATA);		/* clear transmit + InitDone */
+-#ifdef	DEBUG
+-	printf("tx_ring.u.base %X tx_ring.buf_length %hX tx_ring.misc %hX csr0 %hX\n",
+-		lp->tx_ring.u.base, lp->tx_ring.buf_length, lp->tx_ring.misc,
+-		inw(ioaddr+LANCE_DATA));
+-#endif
+-}
+-
+-static void lance_disable(struct nic *nic)
+-{
+-	(void)inw(ioaddr+LANCE_RESET);
+-	if (chip_table[lance_version].flags & LANCE_MUST_UNRESET)
+-		outw(0, ioaddr+LANCE_RESET);
+-
+-	outw(0, ioaddr+LANCE_ADDR);
+-	outw(0x0004, ioaddr+LANCE_DATA);	/* stop the LANCE */
+-
+-#ifndef	INCLUDE_LANCE
+-	disable_dma(dma);
+-#endif
+-}
+-
+-#ifdef	INCLUDE_LANCE
+-static int lance_probe1(struct nic *nic, struct pci_device *pci)
+-#else
+-static int lance_probe1(struct nic *nic)
+-#endif
+-{
+-	int			reset_val ;
+-	unsigned int		i;
+-	Address			l;
+-	short			dma_channels;
+-#ifndef	INCLUDE_LANCE
+-	static const char	dmas[] = { 5, 6, 7, 3 };
+-#endif
+-
+-	reset_val = inw(ioaddr+LANCE_RESET);
+-	outw(reset_val, ioaddr+LANCE_RESET);
+-#if	1  /* Klaus Espenlaub -- was #ifdef	INCLUDE_NE2100*/
+-	outw(0x0, ioaddr+LANCE_ADDR);	/* Switch to window 0 */
+-	if (inw(ioaddr+LANCE_DATA) != 0x4)
+-		return (-1);
+-#endif
+-	outw(88, ioaddr+LANCE_ADDR);	/* Get the version of the chip */
+-	if (inw(ioaddr+LANCE_ADDR) != 88)
+-		lance_version = 0;
+-	else
+-	{
+-		chip_version = inw(ioaddr+LANCE_DATA);
+-		outw(89, ioaddr+LANCE_ADDR);
+-		chip_version |= inw(ioaddr+LANCE_DATA) << 16;
+-		if ((chip_version & 0xfff) != 0x3)
+-			return (-1);
+-		chip_version = (chip_version >> 12) & 0xffff;
+-		for (lance_version = 1; chip_table[lance_version].id_number != 0; ++lance_version)
+-			if (chip_table[lance_version].id_number == chip_version)
+-				break;
+-	}
+-	/* make sure data structure is 8-byte aligned */
+-	l = ((Address)lance + 7) & ~7;
+-	lp = (struct lance_interface *)l;
+-	lp->init_block.mode = 0x3;	/* disable Rx and Tx */
+-	lp->init_block.filter[0] = lp->init_block.filter[1] = 0x0;
+-	/* using multiple Rx buffer and a single Tx buffer */
+-	lp->init_block.rx_ring = (virt_to_bus(&lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS;
+-	lp->init_block.tx_ring = virt_to_bus(&lp->tx_ring) & 0xffffff;
+-	l = virt_to_bus(&lp->init_block);
+-	outw(0x1, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw((unsigned short)l, ioaddr+LANCE_DATA);
+-	outw(0x2, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw((unsigned short)(l >> 16), ioaddr+LANCE_DATA);
+-	outw(0x4, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	outw(0x915, ioaddr+LANCE_DATA);
+-	outw(0x0, ioaddr+LANCE_ADDR);
+-	(void)inw(ioaddr+LANCE_ADDR);
+-	/* Get station address */
+-	for (i = 0; i < ETH_ALEN; ++i) {
+-		nic->node_addr[i] = inb(ioaddr+LANCE_ETH_ADDR+i);
+-	}
+-#ifndef	INCLUDE_LANCE
+-	/* now probe for DMA channel */
+-	dma_channels = ((inb(DMA1_STAT_REG) >> 4) & 0xf) |
+-		(inb(DMA2_STAT_REG) & 0xf0);
+-	/* need to fix when PCI provides DMA info */
+-	for (i = 0; i < (sizeof(dmas)/sizeof(dmas[0])); ++i)
+-	{
+-		int		j;
+-
+-		dma = dmas[i];
+-		/* Don't enable a permanently busy DMA channel,
+-		   or the machine will hang */
+-		if (dma_channels & (1 << dma))
+-			continue;
+-		outw(0x7f04, ioaddr+LANCE_DATA);	/* clear memory error bits */
+-		set_dma_mode(dma, DMA_MODE_CASCADE);
+-		enable_dma(dma);
+-		outw(0x1, ioaddr+LANCE_DATA);		/* init */
+-		for (j = 100; j > 0; --j)
+-			if (inw(ioaddr+LANCE_DATA) & 0x900)
+-				break;
+-		if (inw(ioaddr+LANCE_DATA) & 0x100)
+-			break;
+-		else
+-			disable_dma(dma);
+-	}
+-	if (i >= (sizeof(dmas)/sizeof(dmas[0])))
+-		dma = 0;
+-	printf("\n%s base %#X, DMA %d, addr %!\n",
+-		chip_table[lance_version].name, ioaddr, dma, nic->node_addr);
+-#else
+-	printf(" %s base %#hX, addr %!\n", chip_table[lance_version].name, ioaddr, nic->node_addr);
+-#endif
+-	if (chip_table[chip_version].flags & LANCE_ENABLE_AUTOSELECT) {
+-		/* Turn on auto-select of media (10baseT or BNC) so that the
+-		 * user watch the LEDs. */
+-		outw(0x0002, ioaddr+LANCE_ADDR);
+-		/* Don't touch 10base2 power bit. */
+-		outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF);
+-	}
+-	return (lance_version);
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-
+-#ifdef	INCLUDE_LANCE
+-struct nic *lancepci_probe(struct nic *nic, unsigned short *probe_addrs, struct pci_device *pci)
+-#endif
+-#ifdef	INCLUDE_NE2100
+-struct nic *ne2100_probe(struct nic *nic, unsigned short *probe_addrs)
+-#endif
+-#ifdef	INCLUDE_NI6510
+-struct nic *ni6510_probe(struct nic *nic, unsigned short *probe_addrs)
+-#endif
+-{
+-	unsigned short		*p;
+-#ifndef	INCLUDE_LANCE
+-	static unsigned short	io_addrs[] = { 0x300, 0x320, 0x340, 0x360, 0 };
+-#endif
+-
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	if (probe_addrs == 0) {
+-#ifdef	INCLUDE_LANCE
+-		return 0;
+-#else
+-		probe_addrs = io_addrs;
+-#endif
+-	}
+-	for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
+-	{
+-		char	offset15, offset14 = inb(ioaddr + 14);
+-		unsigned short	pci_cmd;
+-
+-#ifdef	INCLUDE_NE2100
+-		if ((offset14 == 0x52 || offset14 == 0x57) &&
+-		 ((offset15 = inb(ioaddr + 15)) == 0x57 || offset15 == 0x44))
+-			if (lance_probe1(nic) >= 0)
+-				break;
+-#endif
+-#ifdef	INCLUDE_NI6510
+-		if ((offset14 == 0x00 || offset14 == 0x52) &&
+-		 ((offset15 = inb(ioaddr + 15)) == 0x55 || offset15 == 0x44))
+-			if (lance_probe1(nic) >= 0)
+-				break;
+-#endif
+-#ifdef	INCLUDE_LANCE
+-		adjust_pci_device(pci);
+-		if (lance_probe1(nic, pci) >= 0)
+-			break;
+-#endif
+-	}
+-	/* if board found */
+-	if (ioaddr != 0)
+-	{
+-		/* point to NIC specific routines */
+-		lance_reset(nic);
+-		nic->reset = lance_reset;
+-		nic->poll = lance_poll;
+-		nic->transmit = lance_transmit;
+-		nic->disable = lance_disable;
+-		return nic;
+-	}
+-
+-	/* no board found */
+-	return 0;
+-}
+diff -Naur grub-0.97.orig/netboot/latch.h grub-0.97/netboot/latch.h
+--- grub-0.97.orig/netboot/latch.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/latch.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,10 @@
++#ifndef LATCH_H
++#define LATCH_H
++
++#define	TICKS_PER_SEC		18
++
++/* For different calibrators of the TSC move the declaration of
++ * sleep_latch and the definitions of it's length here...
++ */
++
++#endif /* LATCH_H */
+diff -Naur grub-0.97.orig/netboot/linux-asm-io.h grub-0.97/netboot/linux-asm-io.h
+--- grub-0.97.orig/netboot/linux-asm-io.h	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/linux-asm-io.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,187 +0,0 @@
+-#ifndef	_ASM_IO_H
+-#define _ASM_IO_H
+-
+-/*
+- * This file contains the definitions for the x86 IO instructions
+- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+- * versions of the single-IO instructions (inb_p/inw_p/..).
+- *
+- * This file is not meant to be obfuscating: it's just complicated
+- * to (a) handle it all in a way that makes gcc able to optimize it
+- * as well as possible and (b) trying to avoid writing the same thing
+- * over and over again with slight variations and possibly making a
+- * mistake somewhere.
+- */
+-
+-/*
+- * Thanks to James van Artsdalen for a better timing-fix than
+- * the two short jumps: using outb's to a nonexistent port seems
+- * to guarantee better timings even on fast machines.
+- *
+- * On the other hand, I'd like to be sure of a non-existent port:
+- * I feel a bit unsafe about using 0x80 (should be safe, though)
+- *
+- *		Linus
+- */
+-
+-#ifdef	SLOW_IO_BY_JUMPING
+-#define __SLOW_DOWN_IO __asm__ __volatile__("jmp 1f\n1:\tjmp 1f\n1:")
+-#else
+-#define __SLOW_DOWN_IO __asm__ __volatile__("outb %al,$0x80")
+-#endif
+-
+-#ifdef	REALLY_SLOW_IO
+-#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
+-#else
+-#define SLOW_DOWN_IO __SLOW_DOWN_IO
+-#endif
+-
+-/*
+- * readX/writeX() are used to access memory mapped devices. On some
+- * architectures the memory mapped IO stuff needs to be accessed
+- * differently. On the x86 architecture, we just read/write the
+- * memory location directly.
+- */
+-#define readb(addr) (*(volatile unsigned char *) (addr))
+-#define readw(addr) (*(volatile unsigned short *) (addr))
+-#define readl(addr) (*(volatile unsigned int *) (addr))
+-
+-#define writeb(b,addr) ((*(volatile unsigned char *) (addr)) = (b))
+-#define writew(b,addr) ((*(volatile unsigned short *) (addr)) = (b))
+-#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
+-
+-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+-
+-/*
+- * Again, i386 does not require mem IO specific function.
+- */
+-
+-#define eth_io_copy_and_sum(a,b,c,d)	eth_copy_and_sum((a),(void *)(b),(c),(d))
+-
+-/*
+- * Talk about misusing macros..
+- */
+-
+-#define __OUT1(s,x) \
+-extern void __out##s(unsigned x value, unsigned short port); \
+-extern inline void __out##s(unsigned x value, unsigned short port) {
+-
+-#define __OUT2(s,s1,s2) \
+-__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
+-
+-#define __OUT(s,s1,x) \
+-__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "d" (port)); } \
+-__OUT1(s##c,x) __OUT2(s,s1,"") : : "a" (value), "id" (port)); } \
+-__OUT1(s##_p,x) __OUT2(s,s1,"w") : : "a" (value), "d" (port)); SLOW_DOWN_IO; } \
+-__OUT1(s##c_p,x) __OUT2(s,s1,"") : : "a" (value), "id" (port)); SLOW_DOWN_IO; }
+-
+-#define __IN1(s,x) \
+-extern unsigned x __in##s(unsigned short port); \
+-extern inline unsigned x __in##s(unsigned short port) { unsigned x _v;
+-
+-#define __IN2(s,s1,s2) \
+-__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
+-
+-#define __IN(s,s1,x,i...) \
+-__IN1(s,x) __IN2(s,s1,"w") : "=a" (_v) : "d" (port) ,##i ); return _v; } \
+-__IN1(s##c,x) __IN2(s,s1,"") : "=a" (_v) : "id" (port) ,##i ); return _v; } \
+-__IN1(s##_p,x) __IN2(s,s1,"w") : "=a" (_v) : "d" (port) ,##i ); SLOW_DOWN_IO; return _v; } \
+-__IN1(s##c_p,x) __IN2(s,s1,"") : "=a" (_v) : "id" (port) ,##i ); SLOW_DOWN_IO; return _v; }
+-
+-#define __INS(s) \
+-extern void ins##s(unsigned short port, void * addr, unsigned long count); \
+-extern inline void ins##s(unsigned short port, void * addr, unsigned long count) \
+-{ __asm__ __volatile__ ("cld ; rep ; ins" #s \
+-: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+-
+-#define __OUTS(s) \
+-extern void outs##s(unsigned short port, const void * addr, unsigned long  count); \
+-extern inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
+-{ __asm__ __volatile__ ("cld ; rep ; outs" #s \
+-: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+-
+-__IN(b,"", char)
+-__IN(w,"",short)
+-__IN(l,"", long)
+-
+-__OUT(b,"b",char)
+-__OUT(w,"w",short)
+-__OUT(l,,int)
+-
+-__INS(b)
+-__INS(w)
+-__INS(l)
+-
+-__OUTS(b)
+-__OUTS(w)
+-__OUTS(l)
+-
+-/*
+- * Note that due to the way __builtin_constant_p() works, you
+- *  - can't use it inside a inline function (it will never be true)
+- *  - you don't have to worry about side effects within the __builtin..
+- */
+-#define outb(val,port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__outbc((val),(port)) : \
+-	__outb((val),(port)))
+-
+-#define inb(port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__inbc(port) : \
+-	__inb(port))
+-
+-#define outb_p(val,port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__outbc_p((val),(port)) : \
+-	__outb_p((val),(port)))
+-
+-#define inb_p(port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__inbc_p(port) : \
+-	__inb_p(port))
+-
+-#define outw(val,port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__outwc((val),(port)) : \
+-	__outw((val),(port)))
+-
+-#define inw(port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__inwc(port) : \
+-	__inw(port))
+-
+-#define outw_p(val,port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__outwc_p((val),(port)) : \
+-	__outw_p((val),(port)))
+-
+-#define inw_p(port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__inwc_p(port) : \
+-	__inw_p(port))
+-
+-#define outl(val,port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__outlc((val),(port)) : \
+-	__outl((val),(port)))
+-
+-#define inl(port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__inlc(port) : \
+-	__inl(port))
+-
+-#define outl_p(val,port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__outlc_p((val),(port)) : \
+-	__outl_p((val),(port)))
+-
+-#define inl_p(port) \
+-((__builtin_constant_p((port)) && (port) < 256) ? \
+-	__inlc_p(port) : \
+-	__inl_p(port))
+-
+-#endif
+diff -Naur grub-0.97.orig/netboot/linux-asm-string.h grub-0.97/netboot/linux-asm-string.h
+--- grub-0.97.orig/netboot/linux-asm-string.h	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/linux-asm-string.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,291 +0,0 @@
+-/*
+- * Taken from Linux /usr/include/asm/string.h
+- * All except memcpy, memmove, memset and memcmp removed.
+- */
+-
+-#ifndef	_I386_STRING_H_
+-#define _I386_STRING_H_
+-
+-/*
+- * This string-include defines all string functions as inline
+- * functions. Use gcc. It also assumes ds=es=data space, this should be
+- * normal. Most of the string-functions are rather heavily hand-optimized,
+- * see especially strtok,strstr,str[c]spn. They should work, but are not
+- * very easy to understand. Everything is done entirely within the register
+- * set, making the functions fast and clean. String instructions have been
+- * used through-out, making for "slightly" unclear code :-)
+- *
+- *		NO Copyright (C) 1991, 1992 Linus Torvalds,
+- *		consider these trivial functions to be PD.
+- */
+-
+-typedef int	size_t;
+-
+-extern void *__memcpy(void * to, const void * from, size_t n);
+-extern void *__constant_memcpy(void * to, const void * from, size_t n);
+-extern void *memmove(void * dest,const void * src, size_t n);
+-extern void *__memset_generic(void * s, char c,size_t count);
+-extern void *__constant_c_memset(void * s, unsigned long c, size_t count);
+-extern void *__constant_c_and_count_memset(void * s, unsigned long pattern, size_t count);
+-
+-
+-extern inline void * __memcpy(void * to, const void * from, size_t n)
+-{
+-int d0, d1, d2;
+-__asm__ __volatile__(
+-	"cld\n\t"
+-	"rep ; movsl\n\t"
+-	"testb $2,%b4\n\t"
+-	"je 1f\n\t"
+-	"movsw\n"
+-	"1:\ttestb $1,%b4\n\t"
+-	"je 2f\n\t"
+-	"movsb\n"
+-	"2:"
+-	: "=&c" (d0), "=&D" (d1), "=&S" (d2)
+-	:"0" (n/4), "q" (n),"1" ((long) to),"2" ((long) from)
+-	: "memory");
+-return (to);
+-}
+-
+-/*
+- * This looks horribly ugly, but the compiler can optimize it totally,
+- * as the count is constant.
+- */
+-extern inline void * __constant_memcpy(void * to, const void * from, size_t n)
+-{
+-	switch (n) {
+-		case 0:
+-			return to;
+-		case 1:
+-			*(unsigned char *)to = *(const unsigned char *)from;
+-			return to;
+-		case 2:
+-			*(unsigned short *)to = *(const unsigned short *)from;
+-			return to;
+-		case 3:
+-			*(unsigned short *)to = *(const unsigned short *)from;
+-			*(2+(unsigned char *)to) = *(2+(const unsigned char *)from);
+-			return to;
+-		case 4:
+-			*(unsigned long *)to = *(const unsigned long *)from;
+-			return to;
+-		case 6:	/* for Ethernet addresses */
+-			*(unsigned long *)to = *(const unsigned long *)from;
+-			*(2+(unsigned short *)to) = *(2+(const unsigned short *)from);
+-			return to;
+-		case 8:
+-			*(unsigned long *)to = *(const unsigned long *)from;
+-			*(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
+-			return to;
+-		case 12:
+-			*(unsigned long *)to = *(const unsigned long *)from;
+-			*(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
+-			*(2+(unsigned long *)to) = *(2+(const unsigned long *)from);
+-			return to;
+-		case 16:
+-			*(unsigned long *)to = *(const unsigned long *)from;
+-			*(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
+-			*(2+(unsigned long *)to) = *(2+(const unsigned long *)from);
+-			*(3+(unsigned long *)to) = *(3+(const unsigned long *)from);
+-			return to;
+-		case 20:
+-			*(unsigned long *)to = *(const unsigned long *)from;
+-			*(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
+-			*(2+(unsigned long *)to) = *(2+(const unsigned long *)from);
+-			*(3+(unsigned long *)to) = *(3+(const unsigned long *)from);
+-			*(4+(unsigned long *)to) = *(4+(const unsigned long *)from);
+-			return to;
+-	}
+-#define COMMON(x) \
+-__asm__ __volatile__( \
+-	"cld\n\t" \
+-	"rep ; movsl" \
+-	x \
+-	: "=&c" (d0), "=&D" (d1), "=&S" (d2) \
+-	: "0" (n/4),"1" ((long) to),"2" ((long) from) \
+-	: "memory");
+-{
+-	int d0, d1, d2;
+-	switch (n % 4) {
+-		case 0: COMMON(""); return to;
+-		case 1: COMMON("\n\tmovsb"); return to;
+-		case 2: COMMON("\n\tmovsw"); return to;
+-		default: COMMON("\n\tmovsw\n\tmovsb"); return to;
+-	}
+-}
+-
+-#undef COMMON
+-}
+-
+-#define __HAVE_ARCH_MEMCPY
+-#define memcpy(t, f, n) \
+-(__builtin_constant_p(n) ? \
+- __constant_memcpy((t),(f),(n)) : \
+- __memcpy((t),(f),(n)))
+-
+-#define __HAVE_ARCH_MEMMOVE
+-extern inline void * memmove(void * dest,const void * src, size_t n)
+-{
+-int d0, d1, d2;
+-if (dest<src)
+-__asm__ __volatile__(
+-	"cld\n\t"
+-	"rep\n\t"
+-	"movsb"
+-	: "=&c" (d0), "=&S" (d1), "=&D" (d2)
+-	:"0" (n),"1" (src),"2" (dest)
+-	: "memory");
+-else
+-__asm__ __volatile__(
+-	"std\n\t"
+-	"rep\n\t"
+-	"movsb\n\t"
+-	"cld"
+-	: "=&c" (d0), "=&S" (d1), "=&D" (d2)
+-	:"0" (n),
+-	 "1" (n-1+(const char *)src),
+-	 "2" (n-1+(char *)dest)
+-	:"memory");
+-return dest;
+-}
+-
+-#define memcmp __builtin_memcmp
+-
+-extern inline void * __memset_generic(void * s, char c,size_t count)
+-{
+-int d0, d1;
+-__asm__ __volatile__(
+-	"cld\n\t"
+-	"rep\n\t"
+-	"stosb"
+-	: "=&c" (d0), "=&D" (d1)
+-	:"a" (c),"1" (s),"0" (count)
+-	:"memory");
+-return s;
+-}
+-
+-/* we might want to write optimized versions of these later */
+-#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count))
+-
+-/*
+- * memset(x,0,y) is a reasonably common thing to do, so we want to fill
+- * things 32 bits at a time even when we don't know the size of the
+- * area at compile-time..
+- */
+-extern inline void * __constant_c_memset(void * s, unsigned long c, size_t count)
+-{
+-int d0, d1;
+-__asm__ __volatile__(
+-	"cld\n\t"
+-	"rep ; stosl\n\t"
+-	"testb $2,%b3\n\t"
+-	"je 1f\n\t"
+-	"stosw\n"
+-	"1:\ttestb $1,%b3\n\t"
+-	"je 2f\n\t"
+-	"stosb\n"
+-	"2:"
+-	: "=&c" (d0), "=&D" (d1)
+-	:"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
+-	:"memory");
+-return (s);
+-}
+-
+-/*
+- * This looks horribly ugly, but the compiler can optimize it totally,
+- * as we by now know that both pattern and count is constant..
+- */
+-extern inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count)
+-{
+-	switch (count) {
+-		case 0:
+-			return s;
+-		case 1:
+-			*(unsigned char *)s = pattern;
+-			return s;
+-		case 2:
+-			*(unsigned short *)s = pattern;
+-			return s;
+-		case 3:
+-			*(unsigned short *)s = pattern;
+-			*(2+(unsigned char *)s) = pattern;
+-			return s;
+-		case 4:
+-			*(unsigned long *)s = pattern;
+-			return s;
+-	}
+-#define COMMON(x) \
+-__asm__  __volatile__("cld\n\t" \
+-	"rep ; stosl" \
+-	x \
+-	: "=&c" (d0), "=&D" (d1) \
+-	: "a" (pattern),"0" (count/4),"1" ((long) s) \
+-	: "memory")
+-{
+-	int d0, d1;
+-	switch (count % 4) {
+-		case 0: COMMON(""); return s;
+-		case 1: COMMON("\n\tstosb"); return s;
+-		case 2: COMMON("\n\tstosw"); return s;
+-		default: COMMON("\n\tstosw\n\tstosb"); return s;
+-	}
+-}
+-
+-#undef COMMON
+-}
+-
+-#define __constant_c_x_memset(s, c, count) \
+-(__builtin_constant_p(count) ? \
+- __constant_c_and_count_memset((s),(c),(count)) : \
+- __constant_c_memset((s),(c),(count)))
+-
+-#define __memset(s, c, count) \
+-(__builtin_constant_p(count) ? \
+- __constant_count_memset((s),(c),(count)) : \
+- __memset_generic((s),(c),(count)))
+-
+-#define __HAVE_ARCH_MEMSET
+-#define memset(s, c, count) \
+-(__builtin_constant_p(c) ? \
+- __constant_c_x_memset((s),(c),(count)) : \
+- __memset((s),(c),(count)))
+-
+-#define __HAVE_ARCH_STRNCMP
+-static inline int strncmp(const char * cs,const char * ct,size_t count)
+-{
+-register int __res;
+-int d0, d1, d2;
+-__asm__ __volatile__(
+-	"1:\tdecl %3\n\t"
+-	"js 2f\n\t"
+-	"lodsb\n\t"
+-	"scasb\n\t"
+-	"jne 3f\n\t"
+-	"testb %%al,%%al\n\t"
+-	"jne 1b\n"
+-	"2:\txorl %%eax,%%eax\n\t"
+-	"jmp 4f\n"
+-	"3:\tsbbl %%eax,%%eax\n\t"
+-	"orb $1,%%al\n"
+-	"4:"
+-		     :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
+-		     :"1" (cs),"2" (ct),"3" (count));
+-return __res;
+-}
+-
+-#define __HAVE_ARCH_STRLEN
+-static inline size_t strlen(const char * s)
+-{
+-int d0;
+-register int __res;
+-__asm__ __volatile__(
+-	"repne\n\t"
+-	"scasb\n\t"
+-	"notl %0\n\t"
+-	"decl %0"
+-	:"=c" (__res), "=&D" (d0) :"1" (s),"a" (0), "0" (0xffffffff));
+-return __res;
+-}
+-
+-#endif
+diff -Naur grub-0.97.orig/netboot/little_bswap.h grub-0.97/netboot/little_bswap.h
+--- grub-0.97.orig/netboot/little_bswap.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/little_bswap.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,17 @@
++#ifndef ETHERBOOT_LITTLE_BSWAP_H
++#define ETHERBOOT_LITTLE_BSWAP_H
++
++#define ntohl(x)	__bswap_32(x)
++#define htonl(x) 	__bswap_32(x)
++#define ntohs(x) 	__bswap_16(x)
++#define htons(x) 	__bswap_16(x)
++#define cpu_to_le32(x)	(x)
++#define cpu_to_le16(x)	(x)
++#define cpu_to_be32(x)	__bswap_32(x)
++#define cpu_to_be16(x)	__bswap_16(x)
++#define le32_to_cpu(x)	(x)
++#define le16_to_cpu(x)	(x)
++#define be32_to_cpu(x)	__bswap_32(x)
++#define be16_to_cpu(x)	__bswap_16(x)
++
++#endif /* ETHERBOOT_LITTLE_BSWAP_H */
+diff -Naur grub-0.97.orig/netboot/main.c grub-0.97/netboot/main.c
+--- grub-0.97.orig/netboot/main.c	2004-05-20 22:19:33.000000000 +0000
++++ grub-0.97/netboot/main.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,1171 +0,0 @@
+-/*
+- *  GRUB  --  GRand Unified Bootloader
+- *  Copyright (C) 2000,2001,2002  Free Software Foundation, Inc.
+- *
+- *  This program is free software; you can redistribute it and/or modify
+- *  it under the terms of the GNU General Public License as published by
+- *  the Free Software Foundation; either version 2 of the License, or
+- *  (at your option) any later version.
+- *
+- *  This program is distributed in the hope that it will be useful,
+- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- *  GNU General Public License for more details.
+- *
+- *  You should have received a copy of the GNU General Public License
+- *  along with this program; if not, write to the Free Software
+- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+- */
+-
+-/* Based on "src/main.c" in etherboot-5.0.5.  */
+-
+-/**************************************************************************
+-ETHERBOOT -  BOOTP/TFTP Bootstrap Program
+-
+-Author: Martin Renters
+-  Date: Dec/93
+-  
+-Literature dealing with the network protocols:
+-       ARP - RFC826
+-       RARP - RFC903
+-       UDP - RFC768
+-       BOOTP - RFC951, RFC2132 (vendor extensions)
+-       DHCP - RFC2131, RFC2132 (options)
+-       TFTP - RFC1350, RFC2347 (options), RFC2348 (blocksize), RFC2349 (tsize)
+-       RPC - RFC1831, RFC1832 (XDR), RFC1833 (rpcbind/portmapper)
+-       NFS - RFC1094, RFC1813 (v3, useful for clarifications, not implemented)
+-
+-**************************************************************************/
+-
+-#define GRUB	1
+-#include <etherboot.h>
+-#include <nic.h>
+-
+-/* #define DEBUG	1 */
+-
+-struct arptable_t arptable[MAX_ARP];
+-
+-/* Set if the user pushes Control-C.  */
+-int ip_abort = 0;
+-/* Set if an ethernet card is probed and IP addresses are set.  */
+-int network_ready = 0;
+-
+-struct rom_info rom;
+-
+-static int vendorext_isvalid;
+-static unsigned long netmask;
+-static struct bootpd_t bootp_data;
+-static unsigned long xid;
+-static unsigned char *end_of_rfc1533 = NULL;
+-
+-#ifndef	NO_DHCP_SUPPORT
+-#endif /* NO_DHCP_SUPPORT */
+-
+-/* äEth */
+-static unsigned char vendorext_magic[] = {0xE4, 0x45, 0x74, 0x68};
+-static const unsigned char broadcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+-
+-#ifdef	NO_DHCP_SUPPORT
+-
+-static unsigned char rfc1533_cookie[5] = {RFC1533_COOKIE, RFC1533_END};
+-
+-#else /* ! NO_DHCP_SUPPORT */
+-
+-static int dhcp_reply;
+-static in_addr dhcp_server = {0L};
+-static in_addr dhcp_addr = {0L};
+-static unsigned char rfc1533_cookie[] = {RFC1533_COOKIE};
+-static unsigned char rfc1533_end[] = {RFC1533_END};
+-
+-static const unsigned char dhcpdiscover[] =
+-{
+-  RFC2132_MSG_TYPE, 1, DHCPDISCOVER,	
+-  RFC2132_MAX_SIZE,2,	/* request as much as we can */
+-  ETH_MAX_MTU / 256, ETH_MAX_MTU % 256,
+-  RFC2132_PARAM_LIST, 4, RFC1533_NETMASK, RFC1533_GATEWAY,
+-  RFC1533_HOSTNAME, RFC1533_EXTENSIONPATH
+-};
+-
+-static const unsigned char dhcprequest[] =
+-{
+-  RFC2132_MSG_TYPE, 1, DHCPREQUEST,
+-  RFC2132_SRV_ID, 4, 0, 0, 0, 0,
+-  RFC2132_REQ_ADDR, 4, 0, 0, 0, 0,
+-  RFC2132_MAX_SIZE, 2,	/* request as much as we can */
+-  ETH_MAX_MTU / 256, ETH_MAX_MTU % 256,
+-  /* request parameters */
+-  RFC2132_PARAM_LIST,
+-  /* 4 standard + 2 vendortags */
+-  4 + 2,
+-  /* Standard parameters */
+-  RFC1533_NETMASK, RFC1533_GATEWAY,
+-  RFC1533_HOSTNAME, RFC1533_EXTENSIONPATH,
+-  /* Etherboot vendortags */
+-  RFC1533_VENDOR_MAGIC,
+-  RFC1533_VENDOR_CONFIGFILE,
+-};
+-
+-#endif /* ! NO_DHCP_SUPPORT */
+-
+-static unsigned short ipchksum (unsigned short *ip, int len);
+-static unsigned short udpchksum (struct iphdr *packet);
+-
+-void
+-print_network_configuration (void)
+-{
+-  if (! eth_probe ())
+-    grub_printf ("No ethernet card found.\n");
+-  else if (! network_ready)
+-    grub_printf ("Not initialized yet.\n");
+-  else
+-    {
+-      etherboot_printf ("Address: %@\n", arptable[ARP_CLIENT].ipaddr.s_addr);
+-      etherboot_printf ("Netmask: %@\n", netmask);
+-      etherboot_printf ("Server: %@\n", arptable[ARP_SERVER].ipaddr.s_addr);
+-      etherboot_printf ("Gateway: %@\n", arptable[ARP_GATEWAY].ipaddr.s_addr);
+-    }
+-}
+-
+-
+-/**************************************************************************
+-DEFAULT_NETMASK - Return default netmask for IP address
+-**************************************************************************/
+-static inline unsigned long 
+-default_netmask (void)
+-{
+-  int net = ntohl (arptable[ARP_CLIENT].ipaddr.s_addr) >> 24;
+-  if (net <= 127)
+-    return (htonl (0xff000000));
+-  else if (net < 192)
+-    return (htonl (0xffff0000));
+-  else
+-    return (htonl (0xffffff00));
+-}
+-
+-/* ifconfig - configure network interface.  */
+-int
+-ifconfig (char *ip, char *sm, char *gw, char *svr)
+-{
+-  in_addr tmp;
+-  
+-  if (sm) 
+-    {
+-      if (! inet_aton (sm, &tmp))
+-	return 0;
+-      
+-      netmask = tmp.s_addr;
+-    }
+-  
+-  if (ip) 
+-    {
+-      if (! inet_aton (ip, &arptable[ARP_CLIENT].ipaddr)) 
+-	return 0;
+-      
+-      if (! netmask && ! sm) 
+-	netmask = default_netmask ();
+-    }
+-  
+-  if (gw && ! inet_aton (gw, &arptable[ARP_GATEWAY].ipaddr)) 
+-    return 0;
+-
+-  /* Clear out the ARP entry.  */
+-  grub_memset (arptable[ARP_GATEWAY].node, 0, ETH_ALEN);
+-  
+-  if (svr && ! inet_aton (svr, &arptable[ARP_SERVER].ipaddr)) 
+-    return 0;
+-
+-  /* Likewise.  */
+-  grub_memset (arptable[ARP_SERVER].node, 0, ETH_ALEN);
+-  
+-  if (ip || sm)
+-    {
+-      if (IP_BROADCAST == (netmask | arptable[ARP_CLIENT].ipaddr.s_addr)
+-	  || netmask == (netmask | arptable[ARP_CLIENT].ipaddr.s_addr)
+-	  || ! netmask)
+-	network_ready = 0;
+-      else
+-	network_ready = 1;
+-    }
+-  
+-  return 1;
+-}
+-
+-
+-/**************************************************************************
+-UDP_TRANSMIT - Send a UDP datagram
+-**************************************************************************/
+-int 
+-udp_transmit (unsigned long destip, unsigned int srcsock,
+-	      unsigned int destsock, int len, const void *buf)
+-{
+-  struct iphdr *ip;
+-  struct udphdr *udp;
+-  struct arprequest arpreq;
+-  int arpentry, i;
+-  int retry;
+-
+-  ip = (struct iphdr *) buf;
+-  udp = (struct udphdr *) ((unsigned long) buf + sizeof (struct iphdr));
+-  ip->verhdrlen = 0x45;
+-  ip->service = 0;
+-  ip->len = htons (len);
+-  ip->ident = 0;
+-  ip->frags = 0;
+-  ip->ttl = 60;
+-  ip->protocol = IP_UDP;
+-  ip->chksum = 0;
+-  ip->src.s_addr = arptable[ARP_CLIENT].ipaddr.s_addr;
+-  ip->dest.s_addr = destip;
+-  ip->chksum = ipchksum ((unsigned short *) buf, sizeof (struct iphdr));
+-  udp->src = htons (srcsock);
+-  udp->dest = htons (destsock);
+-  udp->len = htons (len - sizeof (struct iphdr));
+-  udp->chksum = 0;
+-  udp->chksum = htons (udpchksum (ip));
+-
+-  if (udp->chksum == 0)
+-    udp->chksum = 0xffff;
+-  
+-  if (destip == IP_BROADCAST)
+-    {
+-      eth_transmit (broadcast, IP, len, buf);
+-    }
+-  else
+-    {
+-      if (((destip & netmask)
+-	   != (arptable[ARP_CLIENT].ipaddr.s_addr & netmask))
+-	  && arptable[ARP_GATEWAY].ipaddr.s_addr)
+-	destip = arptable[ARP_GATEWAY].ipaddr.s_addr;
+-      
+-      for (arpentry = 0; arpentry < MAX_ARP; arpentry++)
+-	if (arptable[arpentry].ipaddr.s_addr == destip)
+-	  break;
+-      
+-      if (arpentry == MAX_ARP)
+-	{
+-	  etherboot_printf ("%@ is not in my arp table!\n", destip);
+-	  return 0;
+-	}
+-      
+-      for (i = 0; i < ETH_ALEN; i++)
+-	if (arptable[arpentry].node[i])
+-	  break;
+-      
+-      if (i == ETH_ALEN)
+-	{
+-	  /* Need to do arp request.  */
+-#ifdef DEBUG
+-	  grub_printf ("arp request.\n");
+-#endif
+-	  arpreq.hwtype = htons (1);
+-	  arpreq.protocol = htons (IP);
+-	  arpreq.hwlen = ETH_ALEN;
+-	  arpreq.protolen = 4;
+-	  arpreq.opcode = htons (ARP_REQUEST);
+-	  grub_memmove (arpreq.shwaddr, arptable[ARP_CLIENT].node,
+-			ETH_ALEN);
+-	  grub_memmove (arpreq.sipaddr, (char *) &arptable[ARP_CLIENT].ipaddr,
+-			sizeof (in_addr));
+-	  grub_memset (arpreq.thwaddr, 0, ETH_ALEN);
+-	  grub_memmove (arpreq.tipaddr, (char *) &destip, sizeof (in_addr));
+-	  
+-	  for (retry = 1; retry <= MAX_ARP_RETRIES; retry++)
+-	    {
+-	      long timeout;
+-	      
+-	      eth_transmit (broadcast, ARP, sizeof (arpreq), &arpreq);
+-	      timeout = rfc2131_sleep_interval (TIMEOUT, retry);
+-	      
+-	      if (await_reply (AWAIT_ARP, arpentry, arpreq.tipaddr, timeout))
+-		goto xmit;
+-
+-	      if (ip_abort)
+-		return 0;
+-	    }
+-	  
+-	  return 0;
+-	}
+-      
+-    xmit:
+-      eth_transmit (arptable[arpentry].node, IP, len, buf);
+-    }
+-  
+-  return 1;
+-}
+-
+-/**************************************************************************
+-TFTP - Download extended BOOTP data, or kernel image
+-**************************************************************************/
+-static int
+-tftp (const char *name, int (*fnc) (unsigned char *, int, int, int))
+-{
+-  int retry = 0;
+-  static unsigned short iport = 2000;
+-  unsigned short oport = 0;
+-  unsigned short len, block = 0, prevblock = 0;
+-  int bcounter = 0;
+-  struct tftp_t *tr;
+-  struct tftpreq_t tp;
+-  int rc;
+-  int packetsize = TFTP_DEFAULTSIZE_PACKET;
+-  
+-  /* Clear out the Rx queue first.  It contains nothing of interest,
+-   * except possibly ARP requests from the DHCP/TFTP server.  We use
+-   * polling throughout Etherboot, so some time may have passed since we
+-   * last polled the receive queue, which may now be filled with
+-   * broadcast packets.  This will cause the reply to the packets we are
+-   * about to send to be lost immediately.  Not very clever.  */
+-  await_reply (AWAIT_QDRAIN, 0, NULL, 0);
+-  
+-  tp.opcode = htons (TFTP_RRQ);
+-  len = (grub_sprintf ((char *) tp.u.rrq, "%s%coctet%cblksize%c%d",
+-		       name, 0, 0, 0, TFTP_MAX_PACKET)
+-	 + sizeof (tp.ip) + sizeof (tp.udp) + sizeof (tp.opcode) + 1);
+-  if (! udp_transmit (arptable[ARP_SERVER].ipaddr.s_addr, ++iport,
+-		      TFTP_PORT, len, &tp))
+-    return 0;
+-  
+-  for (;;)
+-    {
+-      long timeout;
+-      
+-#ifdef CONGESTED
+-      timeout = rfc2131_sleep_interval (block ? TFTP_REXMT : TIMEOUT, retry);
+-#else
+-      timeout = rfc2131_sleep_interval (TIMEOUT, retry);
+-#endif
+-
+-      if (! await_reply (AWAIT_TFTP, iport, NULL, timeout))
+-	{
+-	  if (! block && retry++ < MAX_TFTP_RETRIES)
+-	    {
+-	      /* Maybe initial request was lost.  */
+-	      if (! udp_transmit (arptable[ARP_SERVER].ipaddr.s_addr,
+-				  ++iport, TFTP_PORT, len, &tp))
+-		return 0;
+-	      
+-	      continue;
+-	    }
+-	  
+-#ifdef CONGESTED
+-	  if (block && ((retry += TFTP_REXMT) < TFTP_TIMEOUT))
+-	    {
+-	      /* We resend our last ack.  */
+-#ifdef MDEBUG
+-	      grub_printf ("<REXMT>\n");
+-#endif
+-	      udp_transmit (arptable[ARP_SERVER].ipaddr.s_addr,
+-			    iport, oport,
+-			    TFTP_MIN_PACKET, &tp);
+-	      continue;
+-	    }
+-#endif
+-	  /* Timeout.  */
+-	  break;
+-	}
+-      
+-      tr = (struct tftp_t *) &nic.packet[ETH_HLEN];
+-      if (tr->opcode == ntohs (TFTP_ERROR))
+-	{
+-	  grub_printf ("TFTP error %d (%s)\n",
+-		       ntohs (tr->u.err.errcode),
+-		       tr->u.err.errmsg);
+-	  break;
+-	}
+-      
+-      if (tr->opcode == ntohs (TFTP_OACK))
+-	{
+-	  char *p = tr->u.oack.data, *e;
+-	  
+-	  /* Shouldn't happen.  */
+-	  if (prevblock)
+-	    /* Ignore it.  */
+-	    continue;
+-	  
+-	  len = ntohs (tr->udp.len) - sizeof (struct udphdr) - 2;
+-	  if (len > TFTP_MAX_PACKET)
+-	    goto noak;
+-	  
+-	  e = p + len;
+-	  while (*p != '\000' && p < e)
+-	    {
+-	      if (! grub_strcmp ("blksize", p))
+-		{
+-		  p += 8;
+-		  if ((packetsize = getdec (&p)) < TFTP_DEFAULTSIZE_PACKET)
+-		    goto noak;
+-		  
+-		  while (p < e && *p)
+-		    p++;
+-		  
+-		  if (p < e)
+-		    p++;
+-		}
+-	      else
+-		{
+-		noak:
+-		  tp.opcode = htons (TFTP_ERROR);
+-		  tp.u.err.errcode = 8;
+-		  len = (grub_sprintf ((char *) tp.u.err.errmsg,
+-				       "RFC1782 error")
+-			 + sizeof (tp.ip) + sizeof (tp.udp)
+-			 + sizeof (tp.opcode) + sizeof (tp.u.err.errcode)
+-			 + 1);
+-		  udp_transmit (arptable[ARP_SERVER].ipaddr.s_addr,
+-				iport, ntohs (tr->udp.src),
+-				len, &tp);
+-		  return 0;
+-		}
+-	    }
+-	  
+-	  if (p > e)
+-	    goto noak;
+-	  
+-	  /* This ensures that the packet does not get processed as data!  */
+-	  block = tp.u.ack.block = 0; 
+-	}
+-      else if (tr->opcode == ntohs (TFTP_DATA))
+-	{
+-	  len = ntohs (tr->udp.len) - sizeof (struct udphdr) - 4;
+-	  /* Shouldn't happen.  */
+-	  if (len > packetsize)
+-	    /* Ignore it.  */
+-	    continue;
+-	  
+-	  block = ntohs (tp.u.ack.block = tr->u.data.block);
+-	}
+-      else
+-	/* Neither TFTP_OACK nor TFTP_DATA.  */
+-	break;
+-      
+-      if ((block || bcounter) && (block != prevblock + 1))
+-	/* Block order should be continuous */
+-	tp.u.ack.block = htons (block = prevblock);
+-      
+-      /* Should be continuous.  */
+-      tp.opcode = htons (TFTP_ACK);
+-      oport = ntohs (tr->udp.src);
+-      /* Ack.  */
+-      udp_transmit (arptable[ARP_SERVER].ipaddr.s_addr, iport,
+-		    oport, TFTP_MIN_PACKET, &tp);
+-      
+-      if ((unsigned short) (block - prevblock) != 1)
+-	/* Retransmission or OACK, don't process via callback
+-	 * and don't change the value of prevblock.  */
+-	continue;
+-      
+-      prevblock = block;
+-      /* Is it the right place to zero the timer?  */
+-      retry = 0;
+-      
+-      if ((rc = fnc (tr->u.data.download,
+-		     ++bcounter, len, len < packetsize)) >= 0)
+-	return rc;
+-
+-      /* End of data.  */
+-      if (len < packetsize)           
+-	return 1;
+-    }
+-  
+-  return 0;
+-}
+-
+-/**************************************************************************
+-RARP - Get my IP address and load information
+-**************************************************************************/
+-int 
+-rarp (void)
+-{
+-  int retry;
+-
+-  /* arp and rarp requests share the same packet structure.  */
+-  struct arprequest rarpreq;
+-
+-  /* Make sure that an ethernet is probed.  */
+-  if (! eth_probe ())
+-    return 0;
+-
+-  /* Clear the ready flag.  */
+-  network_ready = 0;
+-  
+-  grub_memset (&rarpreq, 0, sizeof (rarpreq));
+-
+-  rarpreq.hwtype = htons (1);
+-  rarpreq.protocol = htons (IP);
+-  rarpreq.hwlen = ETH_ALEN;
+-  rarpreq.protolen = 4;
+-  rarpreq.opcode = htons (RARP_REQUEST);
+-  grub_memmove ((char *) &rarpreq.shwaddr, arptable[ARP_CLIENT].node,
+-		ETH_ALEN);
+-  /* sipaddr is already zeroed out */
+-  grub_memmove ((char *) &rarpreq.thwaddr, arptable[ARP_CLIENT].node,
+-		ETH_ALEN);
+-  /* tipaddr is already zeroed out */
+-
+-  for (retry = 0; retry < MAX_ARP_RETRIES; ++retry)
+-    {
+-      long timeout;
+-      
+-      eth_transmit (broadcast, RARP, sizeof (rarpreq), &rarpreq);
+-
+-      timeout = rfc2131_sleep_interval (TIMEOUT, retry);
+-      if (await_reply (AWAIT_RARP, 0, rarpreq.shwaddr, timeout))
+-	break;
+-
+-      if (ip_abort)
+-	return 0;
+-    }
+-
+-  if (retry < MAX_ARP_RETRIES)
+-    {
+-      network_ready = 1;
+-      return 1;
+-    }
+-
+-  return 0;
+-}
+-
+-/**************************************************************************
+-BOOTP - Get my IP address and load information
+-**************************************************************************/
+-int 
+-bootp (void)
+-{
+-  int retry;
+-#ifndef	NO_DHCP_SUPPORT
+-  int reqretry;
+-#endif /* ! NO_DHCP_SUPPORT */
+-  struct bootpip_t ip;
+-  unsigned long starttime;
+-
+-  /* Make sure that an ethernet is probed.  */
+-  if (! eth_probe ())
+-    return 0;
+-
+-  /* Clear the ready flag.  */
+-  network_ready = 0;
+-
+-#ifdef DEBUG
+-  grub_printf ("network is ready.\n");
+-#endif
+-  
+-  grub_memset (&ip, 0, sizeof (struct bootpip_t));
+-  ip.bp.bp_op = BOOTP_REQUEST;
+-  ip.bp.bp_htype = 1;
+-  ip.bp.bp_hlen = ETH_ALEN;
+-  starttime = currticks ();
+-  /* Use lower 32 bits of node address, more likely to be
+-     distinct than the time since booting */
+-  grub_memmove (&xid, &arptable[ARP_CLIENT].node[2], sizeof(xid));
+-  ip.bp.bp_xid = xid += htonl (starttime);
+-  grub_memmove (ip.bp.bp_hwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
+-#ifdef DEBUG
+-  etherboot_printf ("bp_op = %d\n", ip.bp.bp_op);
+-  etherboot_printf ("bp_htype = %d\n", ip.bp.bp_htype);
+-  etherboot_printf ("bp_hlen = %d\n", ip.bp.bp_hlen);
+-  etherboot_printf ("bp_xid = %d\n", ip.bp.bp_xid);
+-  etherboot_printf ("bp_hwaddr = %!\n", ip.bp.bp_hwaddr);
+-  etherboot_printf ("bp_hops = %d\n", (int) ip.bp.bp_hops);
+-  etherboot_printf ("bp_secs = %d\n", (int) ip.bp.bp_hwaddr);
+-#endif
+-  
+-#ifdef	NO_DHCP_SUPPORT
+-  /* Request RFC-style options.  */
+-  grub_memmove (ip.bp.bp_vend, rfc1533_cookie, 5);
+-#else
+-  /* Request RFC-style options.  */
+-  grub_memmove (ip.bp.bp_vend, rfc1533_cookie, sizeof rfc1533_cookie);
+-  grub_memmove (ip.bp.bp_vend + sizeof rfc1533_cookie, dhcpdiscover,
+-		sizeof dhcpdiscover);
+-  grub_memmove (ip.bp.bp_vend + sizeof rfc1533_cookie + sizeof dhcpdiscover,
+-		rfc1533_end, sizeof rfc1533_end);
+-#endif /* ! NO_DHCP_SUPPORT */
+-
+-  for (retry = 0; retry < MAX_BOOTP_RETRIES;)
+-    {
+-      long timeout;
+-
+-#ifdef DEBUG
+-      grub_printf ("retry = %d\n", retry);
+-#endif
+-      
+-      /* Clear out the Rx queue first.  It contains nothing of
+-       * interest, except possibly ARP requests from the DHCP/TFTP
+-       * server.  We use polling throughout Etherboot, so some time
+-       * may have passed since we last polled the receive queue,
+-       * which may now be filled with broadcast packets.  This will
+-       * cause the reply to the packets we are about to send to be
+-       * lost immediately.  Not very clever.  */
+-      await_reply (AWAIT_QDRAIN, 0, NULL, 0);
+-
+-      udp_transmit (IP_BROADCAST, BOOTP_CLIENT, BOOTP_SERVER,
+-		    sizeof (struct bootpip_t), &ip);
+-      timeout = rfc2131_sleep_interval (TIMEOUT, retry++);
+-#ifdef NO_DHCP_SUPPORT
+-      if (await_reply (AWAIT_BOOTP, 0, NULL, timeout))
+-	{
+-	  network_ready = 1;
+-	  return 1;
+-	}
+-#else /* ! NO_DHCP_SUPPORT */
+-      if (await_reply (AWAIT_BOOTP, 0, NULL, timeout))
+-	{
+-	  if (dhcp_reply != DHCPOFFER)
+-	    {
+-	      network_ready = 1;
+-	      return 1;
+-	    }
+-
+-	  dhcp_reply = 0;
+-#ifdef DEBUG
+-  etherboot_printf ("bp_op = %d\n", (int) ip.bp.bp_op);
+-  etherboot_printf ("bp_htype = %d\n", (int) ip.bp.bp_htype);
+-  etherboot_printf ("bp_hlen = %d\n", (int) ip.bp.bp_hlen);
+-  etherboot_printf ("bp_xid = %d\n", (int) ip.bp.bp_xid);
+-  etherboot_printf ("bp_hwaddr = %!\n", ip.bp.bp_hwaddr);
+-  etherboot_printf ("bp_hops = %d\n", (int) ip.bp.bp_hops);
+-  etherboot_printf ("bp_secs = %d\n", (int) ip.bp.bp_hwaddr);
+-#endif
+-	  grub_memmove (ip.bp.bp_vend, rfc1533_cookie, sizeof rfc1533_cookie);
+-	  grub_memmove (ip.bp.bp_vend + sizeof rfc1533_cookie,
+-			dhcprequest, sizeof dhcprequest);
+-	  grub_memmove (ip.bp.bp_vend + sizeof rfc1533_cookie
+-			+ sizeof dhcprequest,
+-			rfc1533_end, sizeof rfc1533_end);
+-	  grub_memmove (ip.bp.bp_vend + 9, (char *) &dhcp_server,
+-			sizeof (in_addr));
+-	  grub_memmove (ip.bp.bp_vend + 15, (char *) &dhcp_addr,
+-			sizeof (in_addr));
+-#ifdef DEBUG
+-	  grub_printf ("errnum = %d\n", errnum);
+-#endif
+-	  for (reqretry = 0; reqretry < MAX_BOOTP_RETRIES;)
+-	    {
+-	      int ret;
+-#ifdef DEBUG
+-	      grub_printf ("reqretry = %d\n", reqretry);
+-#endif
+-	      
+-	      ret = udp_transmit (IP_BROADCAST, BOOTP_CLIENT, BOOTP_SERVER,
+-				  sizeof (struct bootpip_t), &ip);
+-	      if (! ret)
+-		grub_printf ("udp_transmit failed.\n");
+-	      
+-	      dhcp_reply = 0;
+-	      timeout = rfc2131_sleep_interval (TIMEOUT, reqretry++);
+-	      if (await_reply (AWAIT_BOOTP, 0, NULL, timeout))
+-		if (dhcp_reply == DHCPACK)
+-		  {
+-		    network_ready = 1;
+-		    return 1;
+-		  }
+-
+-#ifdef DEBUG
+-	      grub_printf ("dhcp_reply = %d\n", dhcp_reply);
+-#endif
+-	      
+-	      if (ip_abort)
+-		return 0;
+-	    }
+-	}
+-#endif /* ! NO_DHCP_SUPPORT */
+-      
+-      if (ip_abort)
+-	return 0;
+-      
+-      ip.bp.bp_secs = htons ((currticks () - starttime) / TICKS_PER_SEC);
+-    }
+-
+-  /* Timeout.  */
+-  return 0;
+-}
+-
+-/**************************************************************************
+-UDPCHKSUM - Checksum UDP Packet (one of the rare cases when assembly is
+-            actually simpler...)
+- RETURNS: checksum, 0 on checksum error. This
+-          allows for using the same routine for RX and TX summing:
+-          RX  if (packet->udp.chksum && udpchksum(packet))
+-                  error("checksum error");
+-          TX  packet->udp.chksum=0;
+-              if (0==(packet->udp.chksum=udpchksum(packet)))
+-                  packet->upd.chksum=0xffff;
+-**************************************************************************/
+-static inline void
+-dosum (unsigned short *start, unsigned int len, unsigned short *sum)
+-{
+-  __asm__ __volatile__
+-    ("clc\n"
+-     "1:\tlodsw\n\t"
+-     "xchg %%al,%%ah\n\t"	/* convert to host byte order */
+-     "adcw %%ax,%0\n\t"		/* add carry of previous iteration */
+-     "loop 1b\n\t"
+-     "adcw $0,%0"		/* add carry of last iteration */
+-     : "=b" (*sum), "=S"(start), "=c"(len)
+-     : "0"(*sum), "1"(start), "2"(len)
+-     : "ax", "cc"
+-     );
+-}
+-
+-/* UDP sum:
+- * proto, src_ip, dst_ip, udp_dport, udp_sport, 2*udp_len, payload
+- */
+-static unsigned short
+-udpchksum (struct iphdr *packet)
+-{
+-  int len = ntohs (packet->len);
+-  unsigned short rval;
+-  
+-  /* add udplength + protocol number */
+-  rval = (len - sizeof (struct iphdr)) + IP_UDP;
+-  
+-  /* pad to an even number of bytes */
+-  if (len % 2) {
+-    ((char *) packet)[len++] = 0;
+-  }
+-  
+-  /* sum over src/dst ipaddr + udp packet */
+-  len -= (char *) &packet->src - (char *) packet;
+-  dosum ((unsigned short *) &packet->src, len >> 1, &rval);
+-  
+-  /* take one's complement */
+-  return ~rval;
+-}
+-
+-/**************************************************************************
+-AWAIT_REPLY - Wait until we get a response for our request
+-**************************************************************************/
+-int 
+-await_reply (int type, int ival, void *ptr, int timeout)
+-{
+-  unsigned long time;
+-  struct iphdr *ip;
+-  struct udphdr *udp;
+-  struct arprequest *arpreply;
+-  struct bootp_t *bootpreply;
+-  unsigned short ptype;
+-  unsigned int protohdrlen = (ETH_HLEN + sizeof (struct iphdr)
+-			      + sizeof (struct udphdr));
+-
+-  /* Clear the abort flag.  */
+-  ip_abort = 0;
+-  
+-  time = timeout + currticks ();
+-  /* The timeout check is done below.  The timeout is only checked if
+-   * there is no packet in the Rx queue.  This assumes that eth_poll()
+-   * needs a negligible amount of time.  */
+-  for (;;)
+-    {
+-      if (eth_poll ())
+-	{
+-	  /* We have something!  */
+-	  
+-	  /* Check for ARP - No IP hdr.  */
+-	  if (nic.packetlen >= ETH_HLEN)
+-	    {
+-	      ptype = (((unsigned short) nic.packet[12]) << 8
+-		       | ((unsigned short) nic.packet[13]));
+-	    }
+-	  else
+-	    /* What else could we do with it?  */
+-	    continue;
+-	  
+-	  if (nic.packetlen >= ETH_HLEN + sizeof (struct arprequest)
+-	      && ptype == ARP)
+-	    {
+-	      unsigned long tmp;
+-
+-	      arpreply = (struct arprequest *) &nic.packet[ETH_HLEN];
+-	      
+-	      if (arpreply->opcode == htons (ARP_REPLY)
+-		  && ! grub_memcmp (arpreply->sipaddr, ptr, sizeof (in_addr))
+-		  && type == AWAIT_ARP)
+-		{
+-		  grub_memmove ((char *) arptable[ival].node,
+-				arpreply->shwaddr,
+-				ETH_ALEN);
+-		  return 1;
+-		}
+-	      
+-	      grub_memmove ((char *) &tmp, arpreply->tipaddr,
+-			    sizeof (in_addr));
+-	      
+-	      if (arpreply->opcode == htons (ARP_REQUEST)
+-		  && tmp == arptable[ARP_CLIENT].ipaddr.s_addr)
+-		{
+-		  arpreply->opcode = htons (ARP_REPLY);
+-		  grub_memmove (arpreply->tipaddr, arpreply->sipaddr,
+-				sizeof (in_addr));
+-		  grub_memmove (arpreply->thwaddr, (char *) arpreply->shwaddr,
+-				ETH_ALEN);
+-		  grub_memmove (arpreply->sipaddr,
+-				(char *) &arptable[ARP_CLIENT].ipaddr,
+-				sizeof (in_addr));
+-		  grub_memmove (arpreply->shwaddr,
+-				arptable[ARP_CLIENT].node,
+-				ETH_ALEN);
+-		  eth_transmit (arpreply->thwaddr, ARP,
+-				sizeof (struct arprequest),
+-				arpreply);
+-#ifdef MDEBUG
+-		  grub_memmove (&tmp, arpreply->tipaddr, sizeof (in_addr));
+-		  etherboot_printf ("Sent ARP reply to: %@\n", tmp);
+-#endif	/* MDEBUG */
+-		}
+-	      
+-	      continue;
+-	    }
+-
+-	  if (type == AWAIT_QDRAIN)
+-	    continue;
+-	  
+-	  /* Check for RARP - No IP hdr.  */
+-	  if (type == AWAIT_RARP
+-	      && nic.packetlen >= ETH_HLEN + sizeof (struct arprequest)
+-	      && ptype == RARP)
+-	    {
+-	      arpreply = (struct arprequest *) &nic.packet[ETH_HLEN];
+-	      
+-	      if (arpreply->opcode == htons (RARP_REPLY)
+-		  && ! grub_memcmp (arpreply->thwaddr, ptr, ETH_ALEN))
+-		{
+-		  grub_memmove ((char *) arptable[ARP_SERVER].node,
+-				arpreply->shwaddr, ETH_ALEN);
+-		  grub_memmove ((char *) &arptable[ARP_SERVER].ipaddr,
+-				arpreply->sipaddr, sizeof (in_addr));
+-		  grub_memmove ((char *) &arptable[ARP_CLIENT].ipaddr,
+-				arpreply->tipaddr, sizeof (in_addr));
+-		  return 1;
+-		}
+-	      
+-	      continue;
+-	    }
+-
+-	  /* Anything else has IP header.  */
+-	  if (nic.packetlen < protohdrlen || ptype != IP)
+-	    continue;
+-	  
+-	  ip = (struct iphdr *) &nic.packet[ETH_HLEN];
+-	  if (ip->verhdrlen != 0x45
+-	      || ipchksum ((unsigned short *) ip, sizeof (struct iphdr))
+-	      || ip->protocol != IP_UDP)
+-	    continue;
+-	  
+-	  /*
+-	    - Till Straumann <Till.Straumann@TU-Berlin.de>
+-	    added udp checksum (safer on a wireless link)
+-	    added fragmentation check: I had a corrupted image
+-	    in memory due to fragmented TFTP packets - took me
+-	    3 days to find the cause for this :-(
+-	  */
+-	  
+-	  /* If More Fragments bit and Fragment Offset field
+-	     are non-zero then packet is fragmented */
+-	  if (ip->frags & htons(0x3FFF))
+-	    {
+-	      grub_printf ("ALERT: got a fragmented packet - reconfigure your server\n");
+-	      continue;
+-	    }
+-	  
+-	  udp = (struct udphdr *) &nic.packet[(ETH_HLEN
+-					       + sizeof (struct iphdr))];
+-	  if (udp->chksum && udpchksum (ip))
+-	    {
+-	      grub_printf ("UDP checksum error\n");
+-	      continue;
+-	    }
+-	  
+-	  /* BOOTP ?  */
+-	  bootpreply = (struct bootp_t *)
+-	    &nic.packet[(ETH_HLEN + sizeof (struct iphdr)
+-			 + sizeof (struct udphdr))];
+-	  if (type == AWAIT_BOOTP
+-#ifdef NO_DHCP_SUPPORT
+-	      && (nic.packetlen
+-		  >= (ETH_HLEN + sizeof (struct bootp_t) - BOOTP_VENDOR_LEN))
+-#else
+-	      && (nic.packetlen
+-		  >= (ETH_HLEN + sizeof (struct bootp_t) - DHCP_OPT_LEN))
+-#endif /* ! NO_DHCP_SUPPORT */
+-	      && udp->dest == htons (BOOTP_CLIENT)
+-	      && bootpreply->bp_op == BOOTP_REPLY
+-	      && bootpreply->bp_xid == xid
+-	      && (! grub_memcmp (broadcast, bootpreply->bp_hwaddr, ETH_ALEN)
+-		  || ! grub_memcmp (arptable[ARP_CLIENT].node,
+-				    bootpreply->bp_hwaddr, ETH_ALEN)))
+-	    {
+-#ifdef DEBUG
+-	      grub_printf ("BOOTP packet was received.\n");
+-#endif
+-	      arptable[ARP_CLIENT].ipaddr.s_addr
+-		= bootpreply->bp_yiaddr.s_addr;
+-#ifndef	NO_DHCP_SUPPORT
+-	      dhcp_addr.s_addr = bootpreply->bp_yiaddr.s_addr;
+-#ifdef DEBUG
+-	      etherboot_printf ("dhcp_addr = %@\n", dhcp_addr.s_addr);
+-#endif
+-#endif /* ! NO_DHCP_SUPPORT */
+-	      netmask = default_netmask ();
+-	      arptable[ARP_SERVER].ipaddr.s_addr
+-		= bootpreply->bp_siaddr.s_addr;
+-	      /* Kill arp.  */
+-	      grub_memset (arptable[ARP_SERVER].node, 0, ETH_ALEN);
+-	      arptable[ARP_GATEWAY].ipaddr.s_addr
+-		= bootpreply->bp_giaddr.s_addr;
+-	      /* Kill arp.  */
+-	      grub_memset (arptable[ARP_GATEWAY].node, 0, ETH_ALEN);
+-
+-	      grub_memmove ((char *) BOOTP_DATA_ADDR, (char *) bootpreply,
+-			    sizeof (struct bootpd_t));
+-#ifdef NO_DHCP_SUPPORT
+-	      decode_rfc1533 (BOOTP_DATA_ADDR->bootp_reply.bp_vend,
+-			      0, BOOTP_VENDOR_LEN + MAX_BOOTP_EXTLEN, 1);
+-#else
+-	      decode_rfc1533 (BOOTP_DATA_ADDR->bootp_reply.bp_vend,
+-			      0, DHCP_OPT_LEN + MAX_BOOTP_EXTLEN, 1);
+-#endif /* ! NO_DHCP_SUPPORT */
+-	      
+-	      return 1;
+-	    }
+-	  
+-	  /* TFTP ? */
+-	  if (type == AWAIT_TFTP && ntohs (udp->dest) == ival)
+-	    return 1;
+-	}
+-      else
+-	{
+-	  /* Check for abort key only if the Rx queue is empty -
+-	   * as long as we have something to process, don't
+-	   * assume that something failed.  It is unlikely that
+-	   * we have no processing time left between packets.  */
+-	  if (checkkey () != -1 && ASCII_CHAR (getkey ()) == CTRL_C)
+-	    {
+-	      ip_abort = 1;
+-	      return 0;
+-	    }
+-	  
+-	  /* Do the timeout after at least a full queue walk.  */
+-	  if ((timeout == 0) || (currticks() > time))
+-	    {
+-	      break;
+-	    }
+-	}
+-    }
+-  
+-  return 0;
+-}
+-
+-/**************************************************************************
+-DECODE_RFC1533 - Decodes RFC1533 header
+-**************************************************************************/
+-int
+-decode_rfc1533 (unsigned char *p, int block, int len, int eof)
+-{
+-  static unsigned char *extdata = NULL, *extend = NULL;
+-  unsigned char *extpath = NULL;
+-  unsigned char *endp;
+-  
+-  if (block == 0)
+-    {
+-      end_of_rfc1533 = NULL;
+-      vendorext_isvalid = 0;
+-      
+-      if (grub_memcmp (p, rfc1533_cookie, 4))
+-	/* no RFC 1533 header found */
+-	return 0;
+-      
+-      p += 4;
+-      endp = p + len;
+-    }
+-  else
+-    {
+-      if (block == 1)
+-	{
+-	  if (grub_memcmp (p, rfc1533_cookie, 4))
+-	    /* no RFC 1533 header found */
+-	    return 0;
+-	  
+-	  p += 4;
+-	  len -= 4;
+-	}
+-      
+-      if (extend + len
+-	  <= ((unsigned char *)
+-	      &(BOOTP_DATA_ADDR->bootp_extension[MAX_BOOTP_EXTLEN])))
+-	{
+-	  grub_memmove (extend, p, len);
+-	  extend += len;
+-	}
+-      else
+-	{
+-	  grub_printf ("Overflow in vendor data buffer! Aborting...\n");
+-	  *extdata = RFC1533_END;
+-	  return 0;
+-	}
+-      
+-      p = extdata;
+-      endp = extend;
+-    }
+-
+-  if (! eof)
+-    return -1;
+-  
+-  while (p < endp)
+-    {
+-      unsigned char c = *p;
+-      
+-      if (c == RFC1533_PAD)
+-	{
+-	  p++;
+-	  continue;
+-	}
+-      else if (c == RFC1533_END)
+-	{
+-	  end_of_rfc1533 = endp = p;
+-	  continue;
+-	}
+-      else if (c == RFC1533_NETMASK)
+-	{
+-	  grub_memmove ((char *) &netmask, p + 2, sizeof (in_addr));
+-	}
+-      else if (c == RFC1533_GATEWAY)
+-	{
+-	  /* This is a little simplistic, but it will
+-	     usually be sufficient.
+-	     Take only the first entry.  */
+-	  if (TAG_LEN (p) >= sizeof (in_addr))
+-	    grub_memmove ((char *) &arptable[ARP_GATEWAY].ipaddr, p + 2,
+-			  sizeof (in_addr));
+-	}
+-      else if (c == RFC1533_EXTENSIONPATH)
+-	extpath = p;
+-#ifndef	NO_DHCP_SUPPORT
+-      else if (c == RFC2132_MSG_TYPE)
+-	{
+-	  dhcp_reply = *(p + 2);
+-	}
+-      else if (c == RFC2132_SRV_ID)
+-	{
+-	  grub_memmove ((char *) &dhcp_server, p + 2, sizeof (in_addr));
+-#ifdef DEBUG
+-	  etherboot_printf ("dhcp_server = %@\n", dhcp_server.s_addr);
+-#endif
+-	}
+-#endif /* ! NO_DHCP_SUPPORT */
+-      else if (c == RFC1533_VENDOR_MAGIC
+-	       && TAG_LEN(p) >= 6
+-	       && ! grub_memcmp (p + 2, vendorext_magic, 4)
+-	       && p[6] == RFC1533_VENDOR_MAJOR)
+-	vendorext_isvalid++;
+-      /* GRUB now handles its own tag. Get the name of a configuration
+-	 file from the network. Cool...  */
+-      else if (c == RFC1533_VENDOR_CONFIGFILE)
+-	{
+-	  int l = TAG_LEN (p);
+-	  
+-	  /* Eliminate the trailing NULs according to RFC 2132.  */
+-	  while (*(p + 2 + l - 1) == '\000' && l > 0)
+-	    l--;
+-	  
+-	  /* XXX: Should check if LEN is less than the maximum length
+-	     of CONFIG_FILE. This kind of robustness will be a goal
+-	     in GRUB 1.0.  */
+-	  grub_memmove (config_file, p + 2, l);
+-	  config_file[l] = 0;
+-	}
+-      
+-      p += TAG_LEN (p) + 2;
+-    }
+-  
+-  extdata = extend = endp;
+-  
+-  /* Perhaps we can eliminate this because we doesn't require so
+-     much information, but I leave this alone.  */
+-  if (block == 0 && extpath != NULL)
+-    {
+-      char fname[64];
+-      int fnamelen = TAG_LEN (extpath);
+-      
+-      while (*(extpath + 2 + fnamelen - 1) == '\000' && fnamelen > 0)
+-	fnamelen--;
+-      
+-      if (fnamelen + 1 > sizeof (fname))
+-	{
+-	  grub_printf ("Too long file name for Extensions Path\n");
+-	  return 0;
+-	}
+-      else if (! fnamelen)
+-	{
+-	  grub_printf ("Empty file name for Extensions Path\n");
+-	  return 0;
+-	}
+-      
+-      grub_memmove (fname, extpath + 2, fnamelen);
+-      fname[fnamelen] = '\000';
+-      grub_printf ("Loading BOOTP-extension file: %s\n", fname);
+-      tftp (fname, decode_rfc1533);
+-    }
+-  
+-  /* Proceed with next block.  */
+-  return -1;
+-}
+-
+-/**************************************************************************
+-IPCHKSUM - Checksum IP Header
+-**************************************************************************/
+-static unsigned short 
+-ipchksum (unsigned short *ip, int len)
+-{
+-  unsigned long sum = 0;
+-  len >>= 1;
+-  while (len--)
+-    {
+-      sum += *(ip++);
+-      if (sum > 0xFFFF)
+-	sum -= 0xFFFF;
+-    }
+-  return (~sum) & 0x0000FFFF;
+-}
+-
+-#define TWO_SECOND_DIVISOR (2147483647l/TICKS_PER_SEC)
+-
+-/**************************************************************************
+-RFC2131_SLEEP_INTERVAL - sleep for expotentially longer times
+-**************************************************************************/
+-long
+-rfc2131_sleep_interval (int base, int exp)
+-{
+-  static long seed = 0;
+-  long q;
+-  unsigned long tmo;
+-  
+-#ifdef BACKOFF_LIMIT
+-  if (exp > BACKOFF_LIMIT)
+-    exp = BACKOFF_LIMIT;
+-#endif
+-  if (!seed)
+-    /* Initialize linear congruential generator */
+-    seed = (currticks () + *((long *) &arptable[ARP_CLIENT].node)
+-	    + ((short *) arptable[ARP_CLIENT].node)[2]);
+-  /* simplified version of the LCG given in Bruce Schneier's
+-     "Applied Cryptography" */
+-  q = seed / 53668;
+-  if ((seed = 40014 * (seed - 53668 * q) - 12211 *q ) < 0)
+-    seed += 2147483563L;
+-  tmo = (base << exp) + (TICKS_PER_SEC - (seed / TWO_SECOND_DIVISOR));
+-  return tmo;
+-}
+-
+-/**************************************************************************
+-CLEANUP - shut down networking
+-**************************************************************************/
+-void
+-cleanup_net (void)
+-{
+-  if (network_ready)
+-    {
+-      /* Stop receiving packets.  */
+-      eth_disable ();
+-      network_ready = 0;
+-    }
+-}
+diff -Naur grub-0.97.orig/netboot/mii.h grub-0.97/netboot/mii.h
+--- grub-0.97.orig/netboot/mii.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/mii.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,105 @@
++/*
++ * linux/mii.h: definitions for MII-compatible transceivers
++ * Originally drivers/net/sunhme.h.
++ *
++ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
++ *
++ * Copied Form Linux 2.4.25 an unneeded items removed by:
++ * Timothy Legge (timlegge at etherboot dot org)
++ *
++ * 03/26/2004
++ */
++
++/* Generic MII registers. */
++
++#define MII_BMCR            0x00	/* Basic mode control register */
++#define MII_BMSR            0x01	/* Basic mode status register  */
++#define MII_PHYSID1         0x02        /* PHYS ID 1                   */
++#define MII_PHYSID2         0x03        /* PHYS ID 2                   */
++#define MII_ADVERTISE       0x04	/* Advertisement control reg   */
++#define MII_LPA             0x05	/* Link partner ability reg    */
++#define MII_EXPANSION       0x06        /* Expansion register          */
++#define MII_DCOUNTER        0x12        /* Disconnect counter          */
++#define MII_FCSCOUNTER      0x13        /* False carrier counter       */
++#define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
++#define MII_RERRCOUNTER     0x15        /* Receive error counter       */
++#define MII_SREVISION       0x16        /* Silicon revision            */
++#define MII_RESV1           0x17        /* Reserved...                 */
++#define MII_LBRERROR        0x18        /* Lpback, rx, bypass error    */
++#define MII_PHYADDR         0x19        /* PHY address                 */
++#define MII_RESV2           0x1a        /* Reserved...                 */
++#define MII_TPISTATUS       0x1b        /* TPI status for 10mbps       */
++#define MII_NCONFIG         0x1c        /* Network interface config    */
++
++/* Basic mode control register. */
++#define BMCR_RESV               0x007f  /* Unused...                   */
++#define BMCR_CTST               0x0080  /* Collision test              */
++#define BMCR_FULLDPLX           0x0100	/* Full duplex                 */
++#define BMCR_ANRESTART          0x0200	/* Auto negotiation restart    */
++#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
++#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
++#define BMCR_ANENABLE           0x1000	/* Enable auto negotiation     */
++#define BMCR_SPEED100           0x2000	/* Select 100Mbps              */
++#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
++#define BMCR_RESET              0x8000	/* Reset the DP83840           */
++
++/* Basic mode status register. */
++#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
++#define BMSR_JCD                0x0002  /* Jabber detected             */
++#define BMSR_LSTATUS            0x0004  /* Link status                 */
++#define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
++#define BMSR_RFAULT             0x0010  /* Remote fault detected       */
++#define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
++#define BMSR_RESV               0x07c0  /* Unused...                   */
++#define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
++#define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
++#define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
++#define BMSR_100FULL            0x4000  /* Can do 100mbps, full-duplex */
++#define BMSR_100BASE4           0x8000  /* Can do 100mbps, 4k packets  */
++
++/* Advertisement control register. */
++#define ADVERTISE_SLCT          0x001f  /* Selector bits               */
++#define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
++#define ADVERTISE_10HALF        0x0020	/* Try for 10mbps half-duplex  */
++#define ADVERTISE_10FULL        0x0040	/* Try for 10mbps full-duplex  */
++#define ADVERTISE_100HALF       0x0080	/* Try for 100mbps half-duplex */
++#define ADVERTISE_100FULL       0x0100	/* Try for 100mbps full-duplex */
++#define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
++#define ADVERTISE_RESV          0x1c00  /* Unused...                   */
++#define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
++#define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
++#define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
++
++#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
++			ADVERTISE_CSMA)
++#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
++                      ADVERTISE_100HALF | ADVERTISE_100FULL)
++
++/* Link partner ability register. */
++#define LPA_SLCT                0x001f  /* Same as advertise selector  */
++#define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
++#define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
++#define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
++#define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
++#define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
++#define LPA_RESV                0x1c00  /* Unused...                   */
++#define LPA_RFAULT              0x2000  /* Link partner faulted        */
++#define LPA_LPACK               0x4000  /* Link partner acked us       */
++#define LPA_NPAGE               0x8000  /* Next page bit               */
++
++#define LPA_DUPLEX            (LPA_10FULL | LPA_100FULL)
++#define LPA_100                       (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
++
++/* Expansion register for auto-negotiation. */
++#define EXPANSION_NWAY          0x0001  /* Can do N-way auto-nego      */
++#define EXPANSION_LCWP          0x0002  /* Got new RX page code word   */
++#define EXPANSION_ENABLENPAGE   0x0004  /* This enables npage words    */
++#define EXPANSION_NPCAPABLE     0x0008  /* Link partner supports npage */
++#define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
++#define EXPANSION_RESV          0xffe0  /* Unused...                   */
++
++/* N-way test register. */
++#define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
++#define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
++#define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
++
+diff -Naur grub-0.97.orig/netboot/misc.c grub-0.97/netboot/misc.c
+--- grub-0.97.orig/netboot/misc.c	2003-07-09 11:45:37.000000000 +0000
++++ grub-0.97/netboot/misc.c	2005-08-31 19:03:35.000000000 +0000
+@@ -19,37 +19,90 @@
+ 
+ /* Based on "src/misc.c" in etherboot-5.0.5.  */
+ 
+-#define GRUB	1
+-#include <etherboot.h>
++#include "grub.h"
++#include "timer.h"
+ 
+-void
+-sleep (int secs)
++#include "nic.h"
++
++/**************************************************************************
++RANDOM - compute a random number between 0 and 2147483647L or 2147483562?
++**************************************************************************/
++int32_t random(void)
+ {
+-  unsigned long tmo = currticks () + secs;
++	static int32_t seed = 0;
++	int32_t q;
++	if (!seed) /* Initialize linear congruential generator */
++		seed = currticks() + *(int32_t *)&arptable[ARP_CLIENT].node
++		       + ((int16_t *)arptable[ARP_CLIENT].node)[2];
++	/* simplified version of the LCG given in Bruce Schneier's
++	   "Applied Cryptography" */
++	q = seed/53668;
++	if ((seed = 40014*(seed-53668*q) - 12211*q) < 0) seed += 2147483563L;
++	return seed;
++}
+ 
+-  while (currticks () < tmo)
+-    ;
++/**************************************************************************
++POLL INTERRUPTIONS
++**************************************************************************/
++void poll_interruptions(void)
++{
++	if (checkkey() != -1 && ASCII_CHAR(getkey()) == K_INTR) {
++		user_abort++;
++	}
+ }
+ 
+-void
+-twiddle (void)
++/**************************************************************************
++SLEEP
++**************************************************************************/
++void sleep(int secs)
+ {
+-  static unsigned long lastticks = 0;
+-  static int count = 0;
+-  static const char tiddles[]="-\\|/";
+-  unsigned long ticks;
++	unsigned long tmo;
+ 
+-  if (debug)
+-    {
+-      if ((ticks = currticks ()) == lastticks)
+-	return;
+-      
+-      lastticks = ticks;
+-      grub_putchar (tiddles[(count++) & 3]);
+-      grub_putchar ('\b');
+-    }
++	for (tmo = currticks()+secs*TICKS_PER_SEC; currticks() < tmo; ) {
++		poll_interruptions();
++	}
++}
++
++/**************************************************************************
++INTERRUPTIBLE SLEEP
++**************************************************************************/
++void interruptible_sleep(int secs)
++{
++	printf("<sleep>\n");
++	return sleep(secs);
++}
++
++/**************************************************************************
++TWIDDLE
++**************************************************************************/
++void twiddle(void)
++{
++#ifdef BAR_PROGRESS
++	static int count=0;
++	static const char tiddles[]="-\\|/";
++	static unsigned long lastticks = 0;
++	unsigned long ticks;
++#endif
++#ifdef FREEBSD_PXEEMU
++	extern char pxeemu_nbp_active;
++	if(pxeemu_nbp_active != 0)
++		return;
++#endif
++#ifdef	BAR_PROGRESS
++	/* Limit the maximum rate at which characters are printed */
++	ticks = currticks();
++	if ((lastticks + (TICKS_PER_SEC/18)) > ticks)
++		return;
++	lastticks = ticks;
++
++	putchar(tiddles[(count++)&3]);
++	putchar('\b');
++#else
++	//putchar('.');
++#endif	/* BAR_PROGRESS */
+ }
+ 
++
+ /* Because Etherboot uses its own formats for the printf family,
+    define separate definitions from GRUB.  */
+ /**************************************************************************
+@@ -264,3 +317,5 @@
+   
+   return ret;
+ }
++
++
+diff -Naur grub-0.97.orig/netboot/natsemi.c grub-0.97/netboot/natsemi.c
+--- grub-0.97.orig/netboot/natsemi.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/natsemi.c	2005-08-31 19:53:07.000000000 +0000
+@@ -47,15 +47,15 @@
+ /* Revision History */
+ 
+ /*
++  13 Dec 2003 timlegge 1.1 Enabled Multicast Support
+   29 May 2001  mdc     1.0
+      Initial Release.  Tested with Netgear FA311 and FA312 boards
+-*/
++*/
+ /* Includes */
+ 
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ 
+ /* defines */
+ 
+@@ -71,21 +71,18 @@
+ 
+ #define NUM_RX_DESC    4              /* Number of Rx descriptor registers. */
+ 
+-typedef unsigned char  u8;
+-typedef   signed char  s8;
+-typedef unsigned short u16;
+-typedef   signed short s16;
+-typedef unsigned int   u32;
+-typedef   signed int   s32;
++typedef uint8_t    u8;
++typedef int8_t     s8;
++typedef uint16_t   u16;
++typedef int16_t    s16;
++typedef uint32_t   u32;
++typedef int32_t    s32;
+ 
+ /* helpful macroes if on a big_endian machine for changing byte order.
+    not strictly needed on Intel */
+-#define le16_to_cpu(val) (val)
+-#define cpu_to_le32(val) (val)
+ #define get_unaligned(ptr) (*(ptr))
+ #define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+ #define get_u16(ptr) (*(u16 *)(ptr))
+-#define virt_to_bus(x) ((unsigned long)x)
+ #define virt_to_le32desc(addr)  virt_to_bus(addr)
+ 
+ enum pcistuff {
+@@ -161,7 +158,8 @@
+     AcceptMulticast    = 0x00200000, 
+     AcceptAllMulticast = 0x20000000,
+     AcceptAllPhys      = 0x10000000, 
+-    AcceptMyPhys       = 0x08000000
++    AcceptMyPhys       = 0x08000000,
++    RxFilterEnable     = 0x80000000
+ };
+ 
+ typedef struct _BufferDesc {
+@@ -207,17 +205,12 @@
+ static BufferDesc txd              __attribute__ ((aligned(4)));
+ static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));
+ 
+-#ifdef USE_LOWMEM_BUFFER
+-#define txb ((char *)0x10000 - TX_BUF_SIZE)
+-#define rxb ((char *)0x10000 - NUM_RX_DESC*RX_BUF_SIZE - TX_BUF_SIZE)
+-#else
+ static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
+ static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE] __attribute__ ((aligned(4)));
+-#endif
+ 
+ /* Function Prototypes */
+ 
+-struct nic *natsemi_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci);
++static int natsemi_probe(struct dev *dev, struct pci_device *pci);
+ static int eeprom_read(long addr, int location);
+ static int mdio_read(int phy_id, int location);
+ static void natsemi_init(struct nic *nic);
+@@ -228,8 +221,9 @@
+ static void natsemi_set_rx_mode(struct nic *nic);
+ static void natsemi_check_duplex(struct nic *nic);
+ static void natsemi_transmit(struct nic *nic, const char *d, unsigned int t, unsigned int s, const char *p);
+-static int  natsemi_poll(struct nic *nic);
+-static void natsemi_disable(struct nic *nic);
++static int  natsemi_poll(struct nic *nic, int retrieve);
++static void natsemi_disable(struct dev *dev);
++static void natsemi_irq(struct nic *nic, irq_action_t action);
+ 
+ /* 
+  * Function: natsemi_probe
+@@ -245,24 +239,28 @@
+  * Returns:   struct nic *:          pointer to NIC data structure
+  */
+ 
+-struct nic *
+-natsemi_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci)
++static int
++natsemi_probe(struct dev *dev, struct pci_device *pci)
+ {
++    struct nic *nic = (struct nic *)dev;
+     int i;
+     int prev_eedata;
+     u32 tmp;
+ 
+-    if (io_addrs == 0 || *io_addrs == 0)
+-        return NULL;
++    if (pci->ioaddr == 0)
++        return 0;
++
++    adjust_pci_device(pci);
+ 
+     /* initialize some commonly used globals */
+ 	
+-    ioaddr     = *io_addrs & ~3;
++    nic->irqno  = 0;
++    nic->ioaddr = pci->ioaddr & ~3;
++
++    ioaddr     = pci->ioaddr & ~3;
+     vendor     = pci->vendor;
+     dev_id     = pci->dev_id;
+     nic_name   = pci->name;
+-    
+-    adjust_pci_device(pci);
+ 
+     /* natsemi has a non-standard PM control register
+      * in PCI config space.  Some boards apparently need
+@@ -317,12 +315,12 @@
+     /* initialize device */
+     natsemi_init(nic);
+ 
+-    nic->reset    = natsemi_init;
++    dev->disable  = natsemi_disable;
+     nic->poll     = natsemi_poll;
+     nic->transmit = natsemi_transmit;
+-    nic->disable  = natsemi_disable;
++    nic->irq      = natsemi_irq;
+ 
+-    return nic;
++    return 1;
+ }
+ 
+ /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+@@ -452,7 +450,7 @@
+  * Returns:   void.
+  */
+ static void 
+-natsemi_reset(struct nic *nic)
++natsemi_reset(struct nic *nic __unused)
+ {
+     outl(ChipReset, ioaddr + ChipCmd);
+ 	
+@@ -504,14 +502,14 @@
+  */
+ 
+ static void
+-natsemi_init_txd(struct nic *nic)
++natsemi_init_txd(struct nic *nic __unused)
+ {
+     txd.link   = (u32) 0;
+     txd.cmdsts = (u32) 0;
+-    txd.bufptr = (u32) &txb[0];
++    txd.bufptr = virt_to_bus(&txb[0]);
+ 
+     /* load Transmit Descriptor Register */
+-    outl((u32) &txd, ioaddr + TxRingPtr); 
++    outl(virt_to_bus(&txd), ioaddr + TxRingPtr); 
+     if (natsemi_debug > 1)
+         printf("natsemi_init_txd: TX descriptor register loaded with: %X\n", 
+                inl(ioaddr + TxRingPtr));
+@@ -527,7 +525,7 @@
+  */
+  
+ static void 
+-natsemi_init_rxd(struct nic *nic) 
++natsemi_init_rxd(struct nic *nic __unused) 
+ { 
+     int i;
+ 
+@@ -535,16 +533,16 @@
+ 
+     /* init RX descriptor */
+     for (i = 0; i < NUM_RX_DESC; i++) {
+-        rxd[i].link   = (i+1 < NUM_RX_DESC) ? (u32) &rxd[i+1] : (u32) &rxd[0];
++        rxd[i].link   = virt_to_bus((i+1 < NUM_RX_DESC) ? &rxd[i+1] : &rxd[0]);
+         rxd[i].cmdsts = (u32) RX_BUF_SIZE;
+-        rxd[i].bufptr = (u32) &rxb[i*RX_BUF_SIZE];
++        rxd[i].bufptr = virt_to_bus(&rxb[i*RX_BUF_SIZE]);
+         if (natsemi_debug > 1)
+             printf("natsemi_init_rxd: rxd[%d]=%X link=%X cmdsts=%X bufptr=%X\n", 
+                    i, &rxd[i], rxd[i].link, rxd[i].cmdsts, rxd[i].bufptr);
+     }
+ 
+     /* load Receive Descriptor Register */
+-    outl((u32) &rxd[0], ioaddr + RxRingPtr);
++    outl(virt_to_bus(&rxd[0]), ioaddr + RxRingPtr);
+ 
+     if (natsemi_debug > 1)
+         printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n", 
+@@ -562,14 +560,15 @@
+  * Returns:   void.
+  */
+ 
+-static void natsemi_set_rx_mode(struct nic *nic)
++static void natsemi_set_rx_mode(struct nic *nic __unused)
+ {
+-    u32 rx_mode = AcceptBroadcast | AcceptMyPhys;
++    u32 rx_mode = RxFilterEnable | AcceptBroadcast |
++	    AcceptAllMulticast | AcceptMyPhys;
+ 	
+     outl(rx_mode, ioaddr + RxFilterAddr);
+ }
+ 
+-static void natsemi_check_duplex(struct nic *nic)
++static void natsemi_check_duplex(struct nic *nic __unused)
+ {
+     int duplex = inl(ioaddr + ChipConfig) & 0x20000000 ? 1 : 0;
+ 	
+@@ -607,14 +606,14 @@
+ 		 unsigned int s,     /* size */
+ 		 const char  *p)     /* Packet */
+ {
+-    u32 status, to, nstype;
++    u32 to, nstype;
+     u32 tx_status;
+     
+     /* Stop the transmitter */
+     outl(TxOff, ioaddr + ChipCmd);
+ 
+     /* load Transmit Descriptor Register */
+-    outl((u32) &txd, ioaddr + TxRingPtr);
++    outl(virt_to_bus(&txd), ioaddr + TxRingPtr);
+     if (natsemi_debug > 1)
+         printf("natsemi_transmit: TX descriptor register loaded with: %X\n", 
+                inl(ioaddr + TxRingPtr));
+@@ -636,7 +635,7 @@
+         txb[s++] = '\0';
+ 
+     /* set the transmit buffer descriptor and enable Transmit State Machine */
+-    txd.bufptr = (u32) &txb[0];
++    txd.bufptr = virt_to_bus(&txb[0]);
+     txd.cmdsts = (u32) OWN | s;
+ 
+     /* restart the transmitter */
+@@ -647,7 +646,7 @@
+ 
+     to = currticks() + TX_TIMEOUT;
+ 
+-    while ((((volatile u32) tx_status=txd.cmdsts) & OWN) && (currticks() < to))
++    while ((volatile u32) ( tx_status=txd.cmdsts & OWN) && (currticks() < to))
+         /* wait */ ;
+ 
+     if (currticks() >= to) {
+@@ -674,7 +673,7 @@
+  */
+ 
+ static int
+-natsemi_poll(struct nic *nic)
++natsemi_poll(struct nic *nic, int retrieve)
+ {
+     u32 rx_status = rxd[cur_rx].cmdsts;
+     int retstat = 0;
+@@ -685,6 +684,8 @@
+     if (!(rx_status & OWN))
+         return retstat;
+ 
++    if ( ! retrieve ) return 1;
++
+     if (natsemi_debug > 1)
+         printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
+                cur_rx, rx_status);
+@@ -704,7 +705,7 @@
+ 
+     /* return the descriptor and buffer to receive ring */
+     rxd[cur_rx].cmdsts = RX_BUF_SIZE;
+-    rxd[cur_rx].bufptr = (u32) &rxb[cur_rx*RX_BUF_SIZE];
++    rxd[cur_rx].bufptr = virt_to_bus(&rxb[cur_rx*RX_BUF_SIZE]);
+         
+     if (++cur_rx == NUM_RX_DESC)
+         cur_rx = 0;
+@@ -725,8 +726,12 @@
+  */
+ 
+ static void
+-natsemi_disable(struct nic *nic)
++natsemi_disable(struct dev *dev)
+ {
++    struct nic *nic = (struct nic *)dev;
++    /* merge reset and disable */
++    natsemi_init(nic);
++
+     /* Disable interrupts using the mask. */
+     outl(0, ioaddr + IntrMask);
+     outl(0, ioaddr + IntrEnable);
+@@ -737,3 +742,39 @@
+     /* Restore PME enable bit */
+     outl(SavedClkRun, ioaddr + ClkRun);
+ }
++
++/* Function: natsemi_irq
++ *
++ * Description: Enable, Disable, or Force interrupts
++ *    
++ * Arguments: struct nic *nic:          NIC data structure
++ *            irq_action_t action:      requested action to perform
++ *
++ * Returns:   void.
++ */
++
++static void 
++natsemi_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++static struct pci_id natsemi_nics[] = {
++PCI_ROM(0x100b, 0x0020, "dp83815", "DP83815"),
++};
++
++struct pci_driver natsemi_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "NATSEMI",
++	.probe    = natsemi_probe,
++	.ids      = natsemi_nics,
++	.id_count = sizeof(natsemi_nics)/sizeof(natsemi_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/nfs.h grub-0.97/netboot/nfs.h
+--- grub-0.97.orig/netboot/nfs.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/nfs.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,63 @@
++#ifndef	_NFS_H
++#define	_NFS_H
++
++#define SUNRPC_PORT	111
++
++#define PROG_PORTMAP	100000
++#define PROG_NFS	100003
++#define PROG_MOUNT	100005
++
++#define MSG_CALL	0
++#define MSG_REPLY	1
++
++#define PORTMAP_GETPORT	3
++
++#define MOUNT_ADDENTRY	1
++#define MOUNT_UMOUNTALL	4
++
++#define NFS_LOOKUP	4
++#define	NFS_READLINK	5
++#define NFS_READ	6
++
++#define NFS_FHSIZE	32
++
++#define NFSERR_PERM	1
++#define NFSERR_NOENT	2
++#define NFSERR_ACCES	13
++#define	NFSERR_ISDIR	21
++#define	NFSERR_INVAL	22
++
++/* Block size used for NFS read accesses.  A RPC reply packet (including  all
++ * headers) must fit within a single Ethernet frame to avoid fragmentation.
++ * Chosen to be a power of two, as most NFS servers are optimized for this.  */
++#define NFS_READ_SIZE	1024
++
++#define NFS_MAXLINKDEPTH 16
++
++struct rpc_t {
++	struct iphdr ip;
++	struct udphdr udp;
++	union {
++		uint8_t  data[300];		/* longest RPC call must fit!!!! */
++		struct {
++			uint32_t id;
++			uint32_t type;
++			uint32_t rpcvers;
++			uint32_t prog;
++			uint32_t vers;
++			uint32_t proc;
++			uint32_t data[1];
++		} call;
++		struct {
++			uint32_t id;
++			uint32_t type;
++			uint32_t rstatus;
++			uint32_t verifier;
++			uint32_t v2;
++			uint32_t astatus;
++			uint32_t data[1];
++		} reply;
++	} u;
++};
++
++#endif	/* _NFS_H */
+diff -Naur grub-0.97.orig/netboot/ni5010.c grub-0.97/netboot/ni5010.c
+--- grub-0.97.orig/netboot/ni5010.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/ni5010.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,371 +0,0 @@
+-/**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-Driver for NI5010.
+-Code freely taken from Jan-Pascal van Best and Andreas Mohr's
+-Linux NI5010 driver.
+-***************************************************************************/
+-
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+-/* to get some global routines like printf */
+-#include "etherboot.h"
+-/* to get the interface to the body of the program */
+-#include "nic.h"
+-/* to get our own prototype */
+-#include "cards.h"
+-
+-/* ni5010.h file included verbatim */
+-/*
+- * Racal-Interlan ni5010 Ethernet definitions
+- *
+- * This is an extension to the Linux operating system, and is covered by the
+- * same Gnu Public License that covers that work.
+- *
+- * copyrights (c) 1996 by Jan-Pascal van Best (jvbest@wi.leidenuniv.nl)
+- *
+- * I have done a look in the following sources:
+- *   crynwr-packet-driver by Russ Nelson
+- */
+-
+-#define NI5010_BUFSIZE	2048	/* number of bytes in a buffer */
+-
+-#define NI5010_MAGICVAL0 0x00  /* magic-values for ni5010 card */
+-#define NI5010_MAGICVAL1 0x55
+-#define NI5010_MAGICVAL2 0xAA
+-
+-#define SA_ADDR0 0x02
+-#define SA_ADDR1 0x07
+-#define SA_ADDR2 0x01
+-
+-/* The number of low I/O ports used by the ni5010 ethercard. */
+-#define NI5010_IO_EXTENT       32
+-
+-#define PRINTK(x) if (NI5010_DEBUG) printk x
+-#define PRINTK2(x) if (NI5010_DEBUG>=2) printk x
+-#define PRINTK3(x) if (NI5010_DEBUG>=3) printk x
+-
+-/* The various IE command registers */
+-#define EDLC_XSTAT	(ioaddr + 0x00)	/* EDLC transmit csr */
+-#define EDLC_XCLR	(ioaddr + 0x00)	/* EDLC transmit "Clear IRQ" */
+-#define EDLC_XMASK	(ioaddr + 0x01)	/* EDLC transmit "IRQ Masks" */
+-#define EDLC_RSTAT	(ioaddr + 0x02)	/* EDLC receive csr */
+-#define EDLC_RCLR	(ioaddr + 0x02)	/* EDLC receive "Clear IRQ" */
+-#define EDLC_RMASK	(ioaddr + 0x03)	/* EDLC receive "IRQ Masks" */
+-#define EDLC_XMODE	(ioaddr + 0x04)	/* EDLC transmit Mode */
+-#define EDLC_RMODE	(ioaddr + 0x05)	/* EDLC receive Mode */
+-#define EDLC_RESET	(ioaddr + 0x06)	/* EDLC RESET register */
+-#define EDLC_TDR1	(ioaddr + 0x07)	/* "Time Domain Reflectometry" reg1 */
+-#define EDLC_ADDR	(ioaddr + 0x08)	/* EDLC station address, 6 bytes */
+-	 			/* 0x0E doesn't exist for r/w */
+-#define EDLC_TDR2	(ioaddr + 0x0f)	/* "Time Domain Reflectometry" reg2 */
+-#define IE_GP		(ioaddr + 0x10)	/* GP pointer (word register) */
+-				/* 0x11 is 2nd byte of GP Pointer */
+-#define IE_RCNT		(ioaddr + 0x10)	/* Count of bytes in rcv'd packet */
+- 				/* 0x11 is 2nd byte of "Byte Count" */
+-#define IE_MMODE	(ioaddr + 0x12)	/* Memory Mode register */
+-#define IE_DMA_RST	(ioaddr + 0x13)	/* IE DMA Reset.  write only */
+-#define IE_ISTAT	(ioaddr + 0x13)	/* IE Interrupt Status.  read only */
+-#define IE_RBUF		(ioaddr + 0x14)	/* IE Receive Buffer port */
+-#define IE_XBUF		(ioaddr + 0x15)	/* IE Transmit Buffer port */
+-#define IE_SAPROM	(ioaddr + 0x16)	/* window on station addr prom */
+-#define IE_RESET	(ioaddr + 0x17)	/* any write causes Board Reset */
+-
+-/* bits in EDLC_XSTAT, interrupt clear on write, status when read */
+-#define XS_TPOK		0x80	/* transmit packet successful */
+-#define XS_CS		0x40	/* carrier sense */
+-#define XS_RCVD		0x20	/* transmitted packet received */
+-#define XS_SHORT	0x10	/* transmission media is shorted */
+-#define XS_UFLW		0x08	/* underflow.  iff failed board */
+-#define XS_COLL		0x04	/* collision occurred */
+-#define XS_16COLL	0x02	/* 16th collision occurred */
+-#define XS_PERR		0x01	/* parity error */
+-
+-#define XS_CLR_UFLW	0x08	/* clear underflow */
+-#define XS_CLR_COLL	0x04	/* clear collision */
+-#define XS_CLR_16COLL	0x02	/* clear 16th collision */
+-#define XS_CLR_PERR	0x01	/* clear parity error */
+-
+-/* bits in EDLC_XMASK, mask/enable transmit interrupts.  register is r/w */
+-#define XM_TPOK		0x80	/* =1 to enable Xmt Pkt OK interrupts */
+-#define XM_RCVD		0x20	/* =1 to enable Xmt Pkt Rcvd ints */
+-#define XM_UFLW		0x08	/* =1 to enable Xmt Underflow ints */
+-#define XM_COLL		0x04	/* =1 to enable Xmt Collision ints */
+-#define XM_COLL16	0x02	/* =1 to enable Xmt 16th Coll ints */
+-#define XM_PERR		0x01	/* =1 to enable Xmt Parity Error ints */
+- 				/* note: always clear this bit */
+-#define XM_ALL		(XM_TPOK | XM_RCVD | XM_UFLW | XM_COLL | XM_COLL16)
+-
+-/* bits in EDLC_RSTAT, interrupt clear on write, status when read */
+-#define RS_PKT_OK	0x80	/* received good packet */
+-#define RS_RST_PKT	0x10	/* RESET packet received */
+-#define RS_RUNT		0x08	/* Runt Pkt rcvd.  Len < 64 Bytes */
+-#define RS_ALIGN	0x04	/* Alignment error. not 8 bit aligned */
+-#define RS_CRC_ERR	0x02	/* Bad CRC on rcvd pkt */
+-#define RS_OFLW		0x01	/* overflow for rcv FIFO */
+-#define RS_VALID_BITS	( RS_PKT_OK | RS_RST_PKT | RS_RUNT | RS_ALIGN | RS_CRC_ERR | RS_OFLW )
+- 				/* all valid RSTAT bits */
+-
+-#define RS_CLR_PKT_OK	0x80	/* clear rcvd packet interrupt */
+-#define RS_CLR_RST_PKT	0x10	/* clear RESET packet received */
+-#define RS_CLR_RUNT	0x08	/* clear Runt Pckt received */
+-#define RS_CLR_ALIGN	0x04	/* clear Alignment error */
+-#define RS_CLR_CRC_ERR	0x02	/* clear CRC error */
+-#define RS_CLR_OFLW	0x01	/* clear rcv FIFO Overflow */
+-
+-/* bits in EDLC_RMASK, mask/enable receive interrupts.  register is r/w */
+-#define RM_PKT_OK	0x80	/* =1 to enable rcvd good packet ints */
+-#define RM_RST_PKT	0x10	/* =1 to enable RESET packet ints */
+-#define RM_RUNT		0x08	/* =1 to enable Runt Pkt rcvd ints */
+-#define RM_ALIGN	0x04	/* =1 to enable Alignment error ints */
+-#define RM_CRC_ERR	0x02	/* =1 to enable Bad CRC error ints */
+-#define RM_OFLW		0x01	/* =1 to enable overflow error ints */
+-
+-/* bits in EDLC_RMODE, set Receive Packet mode.  register is r/w */
+-#define RMD_TEST	0x80	/* =1 for Chip testing.  normally 0 */
+-#define RMD_ADD_SIZ	0x10	/* =1 5-byte addr match.  normally 0 */
+-#define RMD_EN_RUNT	0x08	/* =1 enable runt rcv.  normally 0 */
+-#define RMD_EN_RST	0x04	/* =1 to rcv RESET pkt.  normally 0 */
+-
+-#define RMD_PROMISC	0x03	/* receive *all* packets.  unusual */
+-#define RMD_MULTICAST	0x02	/* receive multicasts too.  unusual */
+-#define RMD_BROADCAST	0x01	/* receive broadcasts & normal. usual */
+-#define RMD_NO_PACKETS	0x00	/* don't receive any packets. unusual */
+-
+-/* bits in EDLC_XMODE, set Transmit Packet mode.  register is r/w */
+-#define XMD_COLL_CNT	0xf0	/* coll's since success.  read-only */
+-#define XMD_IG_PAR	0x08	/* =1 to ignore parity.  ALWAYS set */
+-#define XMD_T_MODE	0x04	/* =1 to power xcvr. ALWAYS set this */
+-#define XMD_LBC		0x02	/* =1 for loopback.  normally set */
+-#define XMD_DIS_C	0x01	/* =1 disables contention. normally 0 */
+-
+-/* bits in EDLC_RESET, write only */
+-#define RS_RESET	0x80	/* =1 to hold EDLC in reset state */
+-
+-/* bits in IE_MMODE, write only */
+-#define MM_EN_DMA	0x80	/* =1 begin DMA xfer, Cplt clrs it */
+-#define MM_EN_RCV	0x40	/* =1 allows Pkt rcv.  clr'd by rcv */
+-#define MM_EN_XMT	0x20	/* =1 begin Xmt pkt.  Cplt clrs it */
+-#define MM_BUS_PAGE	0x18	/* =00 ALWAYS.  Used when MUX=1 */
+-#define MM_NET_PAGE	0x06	/* =00 ALWAYS.  Used when MUX=0 */
+-#define MM_MUX		0x01	/* =1 means Rcv Buff on system bus */
+-				/* =0 means Xmt Buff on system bus */
+-
+-/* bits in IE_ISTAT, read only */
+-#define IS_TDIAG	0x80	/* =1 if Diagnostic problem */
+-#define IS_EN_RCV	0x20	/* =1 until frame is rcv'd cplt */
+-#define IS_EN_XMT	0x10	/* =1 until frame is xmt'd cplt */
+-#define IS_EN_DMA	0x08	/* =1 until DMA is cplt or aborted */
+-#define IS_DMA_INT	0x04	/* =0 iff DMA done interrupt. */
+-#define IS_R_INT	0x02	/* =0 iff unmasked Rcv interrupt */
+-#define IS_X_INT	0x01	/* =0 iff unmasked Xmt interrupt */
+-
+-/* NIC specific static variables go here */
+-
+-static unsigned short		ioaddr = 0;
+-static unsigned int		bufsize_rcv = 0;
+-
+-#if	0
+-static void show_registers(void)
+-{
+-	printf("XSTAT %hhX ", inb(EDLC_XSTAT));
+-	printf("XMASK %hhX ", inb(EDLC_XMASK));
+-	printf("RSTAT %hhX ", inb(EDLC_RSTAT));
+-	printf("RMASK %hhX ", inb(EDLC_RMASK));
+-	printf("RMODE %hhX ", inb(EDLC_RMODE));
+-	printf("XMODE %hhX ", inb(EDLC_XMODE));
+-	printf("ISTAT %hhX\n", inb(IE_ISTAT));
+-}
+-#endif
+-
+-static void reset_receiver(void)
+-{
+-	outw(0, IE_GP);		/* Receive packet at start of buffer */
+-	outb(RS_VALID_BITS, EDLC_RCLR);	/* Clear all pending Rcv interrupts */
+-	outb(MM_EN_RCV, IE_MMODE); /* Enable rcv */
+-}
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void ni5010_reset(struct nic *nic)
+-{
+-	int		i;
+-
+-	/* Reset the hardware here.  Don't forget to set the station address. */
+-	outb(RS_RESET, EDLC_RESET);	/* Hold up EDLC_RESET while configing board */
+-	outb(0, IE_RESET);	/* Hardware reset of ni5010 board */
+-	outb(0, EDLC_XMASK);	/* Disable all Xmt interrupts */
+-	outb(0, EDLC_RMASK);	/* Disable all Rcv interrupt */
+-	outb(0xFF, EDLC_XCLR);	/* Clear all pending Xmt interrupts */
+-	outb(0xFF, EDLC_RCLR);	/* Clear all pending Rcv interrupts */
+-	outb(XMD_LBC, EDLC_XMODE);	/* Only loopback xmits */
+-	/* Set the station address */
+-	for(i = 0; i < ETH_ALEN; i++)
+-		outb(nic->node_addr[i], EDLC_ADDR + i);
+-	outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE); 
+-				/* Normal packet xmit mode */
+-	outb(RMD_BROADCAST, EDLC_RMODE);
+-				/* Receive broadcast and normal packets */
+-	reset_receiver();
+-	outb(0x00, EDLC_RESET);	/* Un-reset the ni5010 */
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int ni5010_poll(struct nic *nic)
+-{
+-	int		rcv_stat;
+-
+-	if (((rcv_stat = inb(EDLC_RSTAT)) & RS_VALID_BITS) != RS_PKT_OK) {
+-		outb(rcv_stat, EDLC_RSTAT);	/* Clear the status */
+-		return (0);
+-	}
+-        outb(rcv_stat, EDLC_RCLR);	/* Clear the status */
+-	nic->packetlen = inw(IE_RCNT);
+-	/* Read packet into buffer */
+-        outb(MM_MUX, IE_MMODE);	/* Rcv buffer to system bus */
+-	outw(0, IE_GP);		/* Seek to beginning of packet */
+-	insb(IE_RBUF, nic->packet, nic->packetlen); 
+-	return (1);
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void ni5010_transmit(struct nic *nic,
+-	const char *d,	/* Destination */
+-	unsigned int t,	/* Type */
+-	unsigned int s,	/* size */
+-	const char *p)	/* Packet */
+-{
+-	unsigned int	len;
+-	int		buf_offs, xmt_stat;
+-	unsigned long	time;
+-
+-	len = s + ETH_HLEN;
+-	if (len < ETH_ZLEN)
+-		len = ETH_ZLEN;
+-	buf_offs = NI5010_BUFSIZE - len;
+-	outb(0, EDLC_RMASK);	/* Mask all receive interrupts */
+-	outb(0, IE_MMODE);	/* Put Xmit buffer on system bus */
+-	outb(0xFF, EDLC_RCLR);	/* Clear out pending rcv interrupts */
+-	outw(buf_offs, IE_GP);	/* Point GP at start of packet */
+-	outsb(IE_XBUF, d, ETH_ALEN);	/* Put dst in buffer */
+-	outsb(IE_XBUF, nic->node_addr, ETH_ALEN);/* Put src in buffer */
+-	outb(t >> 8, IE_XBUF);
+-	outb(t, IE_XBUF);
+-	outsb(IE_XBUF, p, s);	/* Put data in buffer */
+-	while (s++ < ETH_ZLEN - ETH_HLEN)	/* Pad to min size */
+-		outb(0, IE_XBUF);
+-	outw(buf_offs, IE_GP);	/* Rewrite where packet starts */
+-	/* should work without that outb() (Crynwr used it) */
+-	/*outb(MM_MUX, IE_MMODE);*/
+-	/* Xmt buffer to EDLC bus */
+-	outb(MM_EN_XMT | MM_MUX, IE_MMODE);	/* Begin transmission */
+-	/* wait for transmit complete */
+-	while (((xmt_stat = inb(IE_ISTAT)) & IS_EN_XMT) != 0)
+-		;
+-	reset_receiver();	/* Immediately switch to receive */
+-}
+-
+-/**************************************************************************
+-DISABLE - Turn off ethernet interface
+-***************************************************************************/
+-static void ni5010_disable(struct nic *nic)
+-{
+-	outb(0, IE_MMODE);
+-	outb(RS_RESET, EDLC_RESET);
+-}
+-
+-static inline int rd_port(void)
+-{
+-	inb(IE_RBUF);
+-	return inb(IE_SAPROM);
+-}
+-
+-static int ni5010_probe1(struct nic *nic)
+-{
+-	int		i, boguscount = 40, data;
+-
+-	/* The tests are from the Linux NI5010 driver
+-	   I don't understand it all, but if it works for them...  */
+-	if (inb(ioaddr) == 0xFF)
+-		return (0);
+-	while ((rd_port() & rd_port() & rd_port()
+-		& rd_port() & rd_port() & rd_port()) != 0xFF)
+-	{
+-		if (boguscount-- <= 0)
+-			return (0);
+-	}
+-	for (i = 0; i < 32; i++)
+-		if ((data = rd_port()) != 0xFF)
+-			break;
+-	if (data == 0xFF)
+-		return (0);
+-	if (data == SA_ADDR0 && rd_port() == SA_ADDR1 && rd_port() == SA_ADDR2) {
+-		for (i = 0; i < 4; i++)
+-			rd_port();
+-		if (rd_port() != NI5010_MAGICVAL1 || rd_port() != NI5010_MAGICVAL2)
+-			return (0);
+-	} else
+-		return (0);
+-	for (i = 0; i < ETH_ALEN; i++) {
+-		outw(i, IE_GP);
+-		nic->node_addr[i] = inb(IE_SAPROM);
+-	}
+-	printf("\nNI5010 ioaddr %#hX, addr %!\n", ioaddr, nic->node_addr);
+-/* get the size of the onboard receive buffer
+- * higher addresses than bufsize are wrapped into real buffer
+- * i.e. data for offs. 0x801 is written to 0x1 with a 2K onboard buffer
+- */
+-	if (bufsize_rcv == 0) {
+-        	outb(1, IE_MMODE);      /* Put Rcv buffer on system bus */
+-        	outw(0, IE_GP);		/* Point GP at start of packet */
+-        	outb(0, IE_RBUF);	/* set buffer byte 0 to 0 */
+-        	for (i = 1; i < 0xFF; i++) {
+-                	outw(i << 8, IE_GP); /* Point GP at packet size to be tested */
+-                	outb(i, IE_RBUF);
+-                	outw(0x0, IE_GP); /* Point GP at start of packet */
+-                	data = inb(IE_RBUF);
+-                	if (data == i) break;
+-        	}
+-		bufsize_rcv = i << 8;
+-        	outw(0, IE_GP);		/* Point GP at start of packet */
+-        	outb(0, IE_RBUF);	/* set buffer byte 0 to 0 again */
+-	}
+-	printf("Bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);
+-	return (1);
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-struct nic *ni5010_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	static unsigned short	io_addrs[] = {
+-		0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0 };
+-	unsigned short		*p;
+-
+-	/* if probe_addrs is 0, then use list above */
+-	if (probe_addrs == 0 || *probe_addrs == 0)
+-		probe_addrs = io_addrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; p++) {
+-		if (ni5010_probe1(nic))
+-			break;
+-	}
+-	if (ioaddr == 0)
+-		return (0);
+-	ni5010_reset(nic);
+-	/* point to NIC specific routines */
+-	nic->reset = ni5010_reset;
+-	nic->poll = ni5010_poll;
+-	nic->transmit = ni5010_transmit;
+-	nic->disable = ni5010_disable;
+-	return (nic);
+-}
+diff -Naur grub-0.97.orig/netboot/nic.c grub-0.97/netboot/nic.c
+--- grub-0.97.orig/netboot/nic.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/nic.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,1198 @@
++/**************************************************************************
++Etherboot -  Network Bootstrap Program
++
++Literature dealing with the network protocols:
++	ARP - RFC826
++	RARP - RFC903
++        IP - RFC791
++	UDP - RFC768
++	BOOTP - RFC951, RFC2132 (vendor extensions)
++	DHCP - RFC2131, RFC2132 (options)
++	TFTP - RFC1350, RFC2347 (options), RFC2348 (blocksize), RFC2349 (tsize)
++	RPC - RFC1831, RFC1832 (XDR), RFC1833 (rpcbind/portmapper)
++	NFS - RFC1094, RFC1813 (v3, useful for clarifications, not implemented)
++	IGMP - RFC1112, RFC2113, RFC2365, RFC2236, RFC3171
++
++**************************************************************************/
++#include "etherboot.h"
++#include "grub.h"
++#include "nic.h"
++#include "elf.h" /* FOR EM_CURRENT */
++#include "bootp.h"
++#include "if_arp.h"
++#include "tftp.h"
++#include "timer.h"
++#include "ip.h"
++#include "udp.h"
++
++/* Currently no other module uses rom, but it is available */
++struct rom_info		rom;
++struct arptable_t	arptable[MAX_ARP];
++#if MULTICAST_LEVEL2
++unsigned long last_igmpv1 = 0;
++struct igmptable_t	igmptable[MAX_IGMP];
++#endif
++static unsigned long	netmask;
++/* Used by nfs.c */
++char *hostname = "";
++int hostnamelen = 0;
++static uint32_t xid;
++static unsigned char *end_of_rfc1533 = NULL;
++static const unsigned char broadcast[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
++static const in_addr zeroIP = { 0L };
++static char rfc1533_venddata[MAX_RFC1533_VENDLEN];
++static unsigned char rfc1533_cookie[4] = { RFC1533_COOKIE };
++static unsigned char rfc1533_cookie_bootp[5] = { RFC1533_COOKIE, RFC1533_END };
++static unsigned char rfc1533_cookie_dhcp[] = { RFC1533_COOKIE };
++static int dhcp_reply;
++static in_addr dhcp_server = { 0L };
++static in_addr dhcp_addr = { 0L };
++
++static const unsigned char dhcpdiscover[] = {
++	RFC2132_MSG_TYPE, 1, DHCPDISCOVER,
++	RFC2132_MAX_SIZE, 2,	/* request as much as we can */
++	ETH_MAX_MTU / 256, ETH_MAX_MTU % 256,
++	/* Vendor class identifier */
++	RFC2132_VENDOR_CLASS_ID, 10, 'G', 'R', 'U', 'B', 'C', 'l', 'i', 'e', 'n', 't',
++	RFC2132_PARAM_LIST, 4, RFC1533_NETMASK, RFC1533_GATEWAY,
++	RFC1533_HOSTNAME, RFC1533_EXTENSIONPATH, RFC1533_END
++};
++static const unsigned char dhcprequest [] = {
++	RFC2132_MSG_TYPE,1,DHCPREQUEST,
++	RFC2132_SRV_ID,4,0,0,0,0,
++	RFC2132_REQ_ADDR,4,0,0,0,0,
++	RFC2132_MAX_SIZE,2,	/* request as much as we can */
++	ETH_MAX_MTU / 256, ETH_MAX_MTU % 256,
++	/* Vendor class identifier */
++	RFC2132_VENDOR_CLASS_ID, 10, 'G', 'R', 'U', 'B', 'C', 'l', 'i', 'e', 'n', 't',
++	RFC2132_PARAM_LIST,
++	/* 4 standard + 2 vendortags */
++	4 + 2,
++	/* Standard parameters */
++	RFC1533_NETMASK, RFC1533_GATEWAY,
++	RFC1533_HOSTNAME, RFC1533_EXTENSIONPATH,
++	/* Etherboot vendortags */
++	RFC1533_VENDOR_MAGIC,
++	RFC1533_VENDOR_CONFIGFILE,
++	RFC1533_END
++};
++
++/* See nic.h */
++int user_abort = 0;
++int network_ready = 0;
++
++#ifdef	REQUIRE_VCI_ETHERBOOT
++int	vci_etherboot;
++#endif
++
++static int dummy(void *unused __unused)
++{
++	return (0);
++}
++
++/* Careful.  We need an aligned buffer to avoid problems on machines
++ * that care about alignment.  To trivally align the ethernet data
++ * (the ip hdr and arp requests) we offset the packet by 2 bytes.
++ * leaving the ethernet data 16 byte aligned.  Beyond this
++ * we use memmove but this makes the common cast simple and fast.
++ */
++static char	packet[ETH_FRAME_LEN + ETH_DATA_ALIGN] __aligned;
++
++struct nic	nic =
++{
++	{
++		0,				/* dev.disable */
++		{
++			0,
++			0,
++			PCI_BUS_TYPE,
++		},				/* dev.devid */
++		0,				/* index */
++		0,				/* type */
++		PROBE_FIRST,			/* how_pobe */
++		PROBE_NONE,			/* to_probe */
++		0,				/* failsafe */
++		0,				/* type_index */
++		{},				/* state */
++	},
++	(int (*)(struct nic *, int))dummy,      /* poll */
++	(void (*)(struct nic *, const char *,
++		unsigned int, unsigned int,
++		const char *))dummy,		/* transmit */
++	(void (*)(struct nic *, irq_action_t))dummy, /* irq */
++	0,					/* flags */
++	&rom,					/* rom_info */
++	arptable[ARP_CLIENT].node,		/* node_addr */
++	packet + ETH_DATA_ALIGN,		/* packet */
++	0,					/* packetlen */
++	0,			/* ioaddr */
++	0,			/* irqno */
++	NULL,					/* priv_data */
++};
++
++
++
++int grub_eth_probe(void)
++{
++	static int probed = 0;
++	struct dev *dev;
++
++	EnterFunction("grub_eth_probe");
++
++	if (probed)
++		return 1;
++
++	network_ready = 0;
++	grub_memset((char *)arptable, 0, MAX_ARP * sizeof(struct arptable_t));
++	dev = &nic.dev;
++	dev->how_probe = -1;
++	dev->type = NIC_DRIVER;
++	dev->failsafe = 1;
++	rom = *((struct rom_info *)ROM_INFO_LOCATION);
++
++	probed = (eth_probe(dev) == PROBE_WORKED);
++
++	LeaveFunction("grub_eth_probe");
++	return probed;
++}
++
++int eth_probe(struct dev *dev)
++{
++	return probe(dev);
++}
++
++int eth_poll(int retrieve)
++{
++	return ((*nic.poll)(&nic, retrieve));
++}
++
++void eth_transmit(const char *d, unsigned int t, unsigned int s, const void *p)
++{
++	(*nic.transmit)(&nic, d, t, s, p);
++	if (t == IP) twiddle();
++}
++
++void eth_disable(void)
++{
++#ifdef MULTICAST_LEVEL2
++	int i;
++	for(i = 0; i < MAX_IGMP; i++) {
++		leave_group(i);
++	}
++#endif
++	disable(&nic.dev);
++}
++
++void eth_irq (irq_action_t action)
++{
++	(*nic.irq)(&nic,action);
++}
++
++/**************************************************************************
++IPCHKSUM - Checksum IP Header
++**************************************************************************/
++uint16_t ipchksum(const void *data, unsigned long length)
++{
++	unsigned long sum;
++	unsigned long i;
++	const uint8_t *ptr;
++
++	/* In the most straight forward way possible,
++	 * compute an ip style checksum.
++	 */
++	sum = 0;
++	ptr = data;
++	for(i = 0; i < length; i++) {
++		unsigned long value;
++		value = ptr[i];
++		if (i & 1) {
++			value <<= 8;
++		}
++		/* Add the new value */
++		sum += value;
++		/* Wrap around the carry */
++		if (sum > 0xFFFF) {
++			sum = (sum + (sum >> 16)) & 0xFFFF;
++		}
++	}
++	return (~cpu_to_le16(sum)) & 0xFFFF;
++}
++
++uint16_t add_ipchksums(unsigned long offset, uint16_t sum, uint16_t new)
++{
++	unsigned long checksum;
++	sum = ~sum & 0xFFFF;
++	new = ~new & 0xFFFF;
++	if (offset & 1) {
++		/* byte swap the sum if it came from an odd offset 
++		 * since the computation is endian independant this
++		 * works.
++		 */
++		new = bswap_16(new);
++	}
++	checksum = sum + new;
++	if (checksum > 0xFFFF) {
++		checksum -= 0xFFFF;
++	}
++	return (~checksum) & 0xFFFF;
++}
++
++/**************************************************************************
++DEFAULT_NETMASK - Return default netmask for IP address
++**************************************************************************/
++static inline unsigned long default_netmask(void)
++{
++	int net = ntohl(arptable[ARP_CLIENT].ipaddr.s_addr) >> 24;
++	if (net <= 127)
++		return(htonl(0xff000000));
++	else if (net < 192)
++		return(htonl(0xffff0000));
++	else
++		return(htonl(0xffffff00));
++}
++
++/**************************************************************************
++IP_TRANSMIT - Send an IP datagram
++**************************************************************************/
++static int await_arp(int ival, void *ptr,
++	unsigned short ptype, struct iphdr *ip __unused, struct udphdr *udp __unused)
++{
++	struct	arprequest *arpreply;
++	if (ptype != ARP)
++		return 0;
++	if (nic.packetlen < ETH_HLEN + sizeof(struct arprequest))
++		return 0;
++	arpreply = (struct arprequest *)&nic.packet[ETH_HLEN];
++
++	if (arpreply->opcode != htons(ARP_REPLY)) 
++		return 0;
++	if (memcmp(arpreply->sipaddr, ptr, sizeof(in_addr)) != 0)
++		return 0;
++	memcpy(arptable[ival].node, arpreply->shwaddr, ETH_ALEN);
++	return 1;
++}
++
++int ip_transmit(int len, const void *buf)
++{
++	unsigned long destip;
++	struct iphdr *ip;
++	struct arprequest arpreq;
++	int arpentry, i;
++	int retry;
++
++	ip = (struct iphdr *)buf;
++	destip = ip->dest.s_addr;
++	if (destip == IP_BROADCAST) {
++		eth_transmit(broadcast, IP, len, buf);
++#ifdef MULTICAST_LEVEL1 
++	} else if ((destip & htonl(MULTICAST_MASK)) == htonl(MULTICAST_NETWORK)) {
++		unsigned char multicast[6];
++		unsigned long hdestip;
++		hdestip = ntohl(destip);
++		multicast[0] = 0x01;
++		multicast[1] = 0x00;
++		multicast[2] = 0x5e;
++		multicast[3] = (hdestip >> 16) & 0x7;
++		multicast[4] = (hdestip >> 8) & 0xff;
++		multicast[5] = hdestip & 0xff;
++		eth_transmit(multicast, IP, len, buf);
++#endif
++	} else {
++		if (((destip & netmask) !=
++		     (arptable[ARP_CLIENT].ipaddr.s_addr & netmask)) &&
++		    arptable[ARP_GATEWAY].ipaddr.s_addr)
++			destip = arptable[ARP_GATEWAY].ipaddr.s_addr;
++		for(arpentry = 0; arpentry<MAX_ARP; arpentry++)
++			if (arptable[arpentry].ipaddr.s_addr == destip) break;
++		if (arpentry == MAX_ARP) {
++			printf("%@ is not in my arp table!\n", destip);
++			return(0);
++		}
++		for (i = 0; i < ETH_ALEN; i++)
++			if (arptable[arpentry].node[i])
++				break;
++		if (i == ETH_ALEN) {	/* Need to do arp request */
++			arpreq.hwtype = htons(1);
++			arpreq.protocol = htons(IP);
++			arpreq.hwlen = ETH_ALEN;
++			arpreq.protolen = 4;
++			arpreq.opcode = htons(ARP_REQUEST);
++			memcpy(arpreq.shwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
++			memcpy(arpreq.sipaddr, &arptable[ARP_CLIENT].ipaddr, sizeof(in_addr));
++			memset(arpreq.thwaddr, 0, ETH_ALEN);
++			memcpy(arpreq.tipaddr, &destip, sizeof(in_addr));
++			for (retry = 1; retry <= MAX_ARP_RETRIES; retry++) {
++				long timeout;
++				eth_transmit(broadcast, ARP, sizeof(arpreq),
++					&arpreq);
++				timeout = rfc2131_sleep_interval(TIMEOUT, retry);
++				if (await_reply(await_arp, arpentry,
++					arpreq.tipaddr, timeout)) goto xmit;
++			}
++			return(0);
++		}
++xmit:
++		eth_transmit(arptable[arpentry].node, IP, len, buf);
++	}
++	return 1;
++}
++
++void build_ip_hdr(unsigned long destip, int ttl, int protocol, int option_len,
++	int len, const void *buf)
++{
++	struct iphdr *ip;
++	ip = (struct iphdr *)buf;
++	ip->verhdrlen = 0x45;
++	ip->verhdrlen += (option_len/4);
++	ip->service = 0;
++	ip->len = htons(len);
++	ip->ident = 0;
++	ip->frags = 0; /* Should we set don't fragment? */
++	ip->ttl = ttl;
++	ip->protocol = protocol;
++	ip->chksum = 0;
++	ip->src.s_addr = arptable[ARP_CLIENT].ipaddr.s_addr;
++	ip->dest.s_addr = destip;
++	ip->chksum = ipchksum(buf, sizeof(struct iphdr) + option_len);
++}
++
++static uint16_t udpchksum(struct iphdr *ip, struct udphdr *udp)
++{
++	struct udp_pseudo_hdr pseudo;
++	uint16_t checksum;
++
++	/* Compute the pseudo header */
++	pseudo.src.s_addr  = ip->src.s_addr;
++	pseudo.dest.s_addr = ip->dest.s_addr;
++	pseudo.unused      = 0;
++	pseudo.protocol    = IP_UDP;
++	pseudo.len         = udp->len;
++
++	/* Sum the pseudo header */
++	checksum = ipchksum(&pseudo, 12);
++
++	/* Sum the rest of the udp packet */
++	checksum = add_ipchksums(12, checksum, ipchksum(udp, ntohs(udp->len)));
++	return checksum;
++}
++
++
++void build_udp_hdr(unsigned long destip, 
++	unsigned int srcsock, unsigned int destsock, int ttl,
++	int len, const void *buf)
++{
++	struct iphdr *ip;
++	struct udphdr *udp;
++	ip = (struct iphdr *)buf;
++	build_ip_hdr(destip, ttl, IP_UDP, 0, len, buf);
++	udp = (struct udphdr *)((char *)buf + sizeof(struct iphdr));
++	udp->src = htons(srcsock);
++	udp->dest = htons(destsock);
++	udp->len = htons(len - sizeof(struct iphdr));
++	udp->chksum = 0;
++	if ((udp->chksum = udpchksum(ip, udp)) == 0)
++		udp->chksum = 0xffff;
++}
++
++
++/**************************************************************************
++UDP_TRANSMIT - Send an UDP datagram
++**************************************************************************/
++int udp_transmit(unsigned long destip, unsigned int srcsock,
++	unsigned int destsock, int len, const void *buf)
++{
++	build_udp_hdr(destip, srcsock, destsock, 60, len, buf);
++	return ip_transmit(len, buf);
++}
++
++/**************************************************************************
++QDRAIN - clear the nic's receive queue
++**************************************************************************/
++static int await_qdrain(int ival __unused, void *ptr __unused,
++	unsigned short ptype __unused, 
++	struct iphdr *ip __unused, struct udphdr *udp __unused)
++{
++	return 0;
++}
++
++void rx_qdrain(void)
++{
++	/* Clear out the Rx queue first.  It contains nothing of interest,
++	 * except possibly ARP requests from the DHCP/TFTP server.  We use
++	 * polling throughout Etherboot, so some time may have passed since we
++	 * last polled the receive queue, which may now be filled with
++	 * broadcast packets.  This will cause the reply to the packets we are
++	 * about to send to be lost immediately.  Not very clever.  */
++	await_reply(await_qdrain, 0, NULL, 0);
++}
++
++/**
++ * rarp
++ *
++ * Get IP address by rarp. Just copy from etherboot
++ **/
++static int await_rarp(int ival, void *ptr, unsigned short ptype, 
++		      struct iphdr *ip, struct udphdr *udp)
++{
++	struct arprequest *arpreply;
++	if (ptype != RARP)
++		return 0;
++	if (nic.packetlen < ETH_HLEN + sizeof(struct arprequest))
++		return 0;
++	arpreply = (struct arprequest *)&nic.packet[ETH_HLEN];
++	if (arpreply->opcode != htons(RARP_REPLY))
++		return 0;
++	if (memcmp(arpreply->thwaddr, ptr, ETH_ALEN) == 0){
++		memcpy(arptable[ARP_SERVER].node, arpreply->shwaddr, ETH_ALEN);
++		memcpy(&arptable[ARP_SERVER].ipaddr, arpreply->sipaddr, sizeof(in_addr));
++		memcpy(&arptable[ARP_CLIENT].ipaddr, arpreply->tipaddr, sizeof(in_addr));
++		return 1;
++	}
++	return 0;
++}
++
++int rarp(void)
++{
++	int retry;
++
++	/* arp and rarp requests share the same packet structure. */
++	struct arprequest rarpreq;
++
++	if(!grub_eth_probe())
++		return 0;
++	network_ready = 0;
++
++	memset(&rarpreq, 0, sizeof(rarpreq));
++
++	rarpreq.hwtype = htons(1);
++	rarpreq.protocol = htons(IP);
++	rarpreq.hwlen = ETH_ALEN;
++	rarpreq.protolen = 4;
++	rarpreq.opcode = htons(RARP_REQUEST);
++	memcpy(&rarpreq.shwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
++	/* sipaddr is already zeroed out */
++	memcpy(&rarpreq.thwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
++	/* tipaddr is already zeroed out */
++
++	for (retry = 0; retry < MAX_ARP_RETRIES; ++retry) {
++		long timeout;
++		eth_transmit(broadcast, RARP, sizeof(rarpreq), &rarpreq);
++
++		timeout = rfc2131_sleep_interval(TIMEOUT, retry);
++		if (await_reply(await_rarp, 0, rarpreq.shwaddr, timeout))
++			break;
++		if (user_abort)
++			return 0;
++	}
++
++	if (retry < MAX_ARP_RETRIES) {
++		network_ready = 1;
++		return (1);
++	}
++	return (0);
++}
++
++/**
++ * bootp
++ *
++ * Get IP address by bootp, segregate from bootp in etherboot.
++ **/
++static int await_bootp(int ival __unused, void *ptr __unused,
++	unsigned short ptype __unused, struct iphdr *ip __unused, 
++	struct udphdr *udp)
++{
++	struct	bootp_t *bootpreply;
++	int len;		/* Length of vendor */
++
++	if (!udp) {
++		return 0;
++	}
++	bootpreply = (struct bootp_t *)
++		&nic.packet[ETH_HLEN + sizeof(struct iphdr) + sizeof(struct udphdr)];
++	len = nic.packetlen - (ETH_HLEN + sizeof(struct iphdr) + 
++		sizeof(struct udphdr) + sizeof(struct bootp_t) - BOOTP_VENDOR_LEN);
++	if (len < 0) {
++		return 0;
++	}
++	if (udp->dest != htons(BOOTP_CLIENT))
++		return 0;
++	if (bootpreply->bp_op != BOOTP_REPLY)
++		return 0;
++	if (bootpreply->bp_xid != xid)
++		return 0;
++	if (memcmp((char *)&bootpreply->bp_siaddr, (char *)&zeroIP, sizeof(in_addr)) == 0)
++		return 0;
++	if ((memcmp(broadcast, bootpreply->bp_hwaddr, ETH_ALEN) != 0) &&
++	    (memcmp(arptable[ARP_CLIENT].node, bootpreply->bp_hwaddr, ETH_ALEN) != 0)) {
++		return 0;
++	}
++	arptable[ARP_CLIENT].ipaddr.s_addr = bootpreply->bp_yiaddr.s_addr;
++	netmask = default_netmask();
++	arptable[ARP_SERVER].ipaddr.s_addr = bootpreply->bp_siaddr.s_addr;
++	memset(arptable[ARP_SERVER].node, 0, ETH_ALEN);  /* Kill arp */
++	arptable[ARP_GATEWAY].ipaddr.s_addr = bootpreply->bp_giaddr.s_addr;
++	memset(arptable[ARP_GATEWAY].node, 0, ETH_ALEN);  /* Kill arp */
++	/* We don't care bootpreply->bp_file, it must be 'pxegrub':-) */
++	memcpy((char *)rfc1533_venddata, (char *)(bootpreply->bp_vend), len);
++	decode_rfc1533(rfc1533_venddata, 0, len, 1);
++	return(1);
++}
++
++int bootp(void)
++{
++	int retry;
++	struct bootpip_t ip;
++	unsigned long  starttime;
++	
++	EnterFunction("bootp");
++
++	if(!grub_eth_probe())
++		return 0;
++	network_ready = 0;
++
++	memset(&ip, 0, sizeof(struct bootpip_t));
++	ip.bp.bp_op = BOOTP_REQUEST;
++	ip.bp.bp_htype = 1;
++	ip.bp.bp_hlen = ETH_ALEN;
++	starttime = currticks();
++	/* Use lower 32 bits of node address, more likely to be
++	   distinct than the time since booting */
++	memcpy(&xid, &arptable[ARP_CLIENT].node[2], sizeof(xid));
++	ip.bp.bp_xid = xid += htonl(starttime);
++	/* bp_secs defaults to zero */
++	memcpy(ip.bp.bp_hwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
++	memcpy(ip.bp.bp_vend, rfc1533_cookie_bootp, sizeof(rfc1533_cookie_bootp)); /* request RFC-style options */
++
++	for (retry = 0; retry < MAX_BOOTP_RETRIES; ) {
++		long timeout;
++
++		rx_qdrain();
++
++		udp_transmit(IP_BROADCAST, BOOTP_CLIENT, BOOTP_SERVER,
++			sizeof(struct bootpip_t), &ip);
++		timeout = rfc2131_sleep_interval(TIMEOUT, retry++);
++		if (await_reply(await_bootp, 0, NULL, timeout)){
++			network_ready = 1;
++			return(1);
++		}
++		if (user_abort)
++			return 0;
++		ip.bp.bp_secs = htons((currticks()-starttime)/TICKS_PER_SEC);
++	}
++	return(0);
++}
++
++/**
++ * dhcp
++ *
++ * Get IP address by dhcp, segregate from bootp in etherboot.
++ **/
++static int await_dhcp(int ival __unused, void *ptr __unused,
++	unsigned short ptype __unused, struct iphdr *ip __unused, 
++	struct udphdr *udp)
++{
++	struct	dhcp_t *dhcpreply;
++	int len;
++
++	if (!udp) {
++		return 0;
++	}
++	dhcpreply = (struct dhcp_t *)
++		&nic.packet[ETH_HLEN + sizeof(struct iphdr) + sizeof(struct udphdr)];
++	len = nic.packetlen - (ETH_HLEN + sizeof(struct iphdr) + 
++		sizeof(struct udphdr) + sizeof(struct dhcp_t) - DHCP_OPT_LEN);
++	if (len < 0){
++		return 0;
++	}
++	if (udp->dest != htons(BOOTP_CLIENT))
++		return 0;
++	if (dhcpreply->bp_op != BOOTP_REPLY)
++		return 0;
++	if (dhcpreply->bp_xid != xid)
++		return 0;
++	if (memcmp((char *)&dhcpreply->bp_siaddr, (char *)&zeroIP, sizeof(in_addr)) == 0)
++		return 0;
++	if ((memcmp(broadcast, dhcpreply->bp_hwaddr, ETH_ALEN) != 0) &&
++	    (memcmp(arptable[ARP_CLIENT].node, dhcpreply->bp_hwaddr, ETH_ALEN) != 0)) {
++		return 0;
++	}
++	arptable[ARP_CLIENT].ipaddr.s_addr = dhcpreply->bp_yiaddr.s_addr;
++	dhcp_addr.s_addr = dhcpreply->bp_yiaddr.s_addr;
++	netmask = default_netmask();
++	arptable[ARP_SERVER].ipaddr.s_addr = dhcpreply->bp_siaddr.s_addr;
++	memset(arptable[ARP_SERVER].node, 0, ETH_ALEN);  /* Kill arp */
++	arptable[ARP_GATEWAY].ipaddr.s_addr = dhcpreply->bp_giaddr.s_addr;
++	memset(arptable[ARP_GATEWAY].node, 0, ETH_ALEN);  /* Kill arp */
++	/* We don't care bootpreply->bp_file. It must be 'pxegrub' */
++	memcpy((char *)rfc1533_venddata, (char *)(dhcpreply->bp_vend), len);
++	decode_rfc1533(rfc1533_venddata, 0, len, 1);
++	return(1);
++}
++
++int dhcp(void)
++{
++	int retry;
++	int reqretry;
++	struct dhcpip_t ip;
++	unsigned long  starttime;
++
++	if(!grub_eth_probe())
++		return 0;
++
++	network_ready = 0;
++
++	memset(&ip, 0, sizeof(struct dhcpip_t));
++	ip.bp.bp_op = BOOTP_REQUEST;
++	ip.bp.bp_htype = 1;
++	ip.bp.bp_hlen = ETH_ALEN;
++	starttime = currticks();
++	/* Use lower 32 bits of node address, more likely to be
++	   distinct than the time since booting */
++	memcpy(&xid, &arptable[ARP_CLIENT].node[2], sizeof(xid));
++	ip.bp.bp_xid = xid += htonl(starttime);
++	memcpy(ip.bp.bp_hwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
++	memcpy(ip.bp.bp_vend, rfc1533_cookie_dhcp, sizeof rfc1533_cookie_dhcp); /* request RFC-style options */
++	memcpy(ip.bp.bp_vend + sizeof rfc1533_cookie_dhcp, dhcpdiscover, sizeof dhcpdiscover);
++
++	for (retry = 0; retry < MAX_BOOTP_RETRIES; ) {
++		long timeout;
++
++		rx_qdrain();
++
++		udp_transmit(IP_BROADCAST, BOOTP_CLIENT, BOOTP_SERVER,
++			     sizeof(struct bootpip_t), &ip);
++		timeout = rfc2131_sleep_interval(TIMEOUT, retry++);
++		if (await_reply(await_dhcp, 0, NULL, timeout)) {
++			/* If not a DHCPOFFER then must be just a
++			   BOOTP reply, be backward compatible with
++			   BOOTP then. Jscott report a bug here, but I
++			   don't know how it happened */
++			if (dhcp_reply != DHCPOFFER){
++				network_ready = 1;
++				return(1);
++			}
++			dhcp_reply = 0;
++			memcpy(ip.bp.bp_vend, rfc1533_cookie_dhcp, sizeof rfc1533_cookie_dhcp);
++			memcpy(ip.bp.bp_vend + sizeof rfc1533_cookie_dhcp, dhcprequest, sizeof dhcprequest);
++			/* Beware: the magic numbers 9 and 15 depend on
++			   the layout of dhcprequest */
++			memcpy(&ip.bp.bp_vend[9], &dhcp_server, sizeof(in_addr));
++			memcpy(&ip.bp.bp_vend[15], &dhcp_addr, sizeof(in_addr));
++			for (reqretry = 0; reqretry < MAX_BOOTP_RETRIES; ) {
++				udp_transmit(IP_BROADCAST, BOOTP_CLIENT, BOOTP_SERVER,
++					     sizeof(struct bootpip_t), &ip);
++				dhcp_reply=0;
++				timeout = rfc2131_sleep_interval(TIMEOUT, reqretry++);
++				if (await_reply(await_dhcp, 0, NULL, timeout))
++					if (dhcp_reply == DHCPACK){
++						network_ready = 1;
++						return(1);
++					}
++				if (user_abort)
++					return 0;
++			}
++		}
++		if (user_abort)
++			return 0;
++		ip.bp.bp_secs = htons((currticks()-starttime)/TICKS_PER_SEC);
++	}
++	return(0);
++}
++
++#ifdef MULTICAST_LEVEL2
++static void send_igmp_reports(unsigned long now)
++{
++	int i;
++	for(i = 0; i < MAX_IGMP; i++) {
++		if (igmptable[i].time && (now >= igmptable[i].time)) {
++			struct igmp_ip_t igmp;
++			igmp.router_alert[0] = 0x94;
++			igmp.router_alert[1] = 0x04;
++			igmp.router_alert[2] = 0;
++			igmp.router_alert[3] = 0;
++			build_ip_hdr(igmptable[i].group.s_addr, 
++				1, IP_IGMP, sizeof(igmp.router_alert), sizeof(igmp), &igmp);
++			igmp.igmp.type = IGMPv2_REPORT;
++			if (last_igmpv1 && 
++				(now < last_igmpv1 + IGMPv1_ROUTER_PRESENT_TIMEOUT)) {
++				igmp.igmp.type = IGMPv1_REPORT;
++			}
++			igmp.igmp.response_time = 0;
++			igmp.igmp.chksum = 0;
++			igmp.igmp.group.s_addr = igmptable[i].group.s_addr;
++			igmp.igmp.chksum = ipchksum(&igmp.igmp, sizeof(igmp.igmp));
++			ip_transmit(sizeof(igmp), &igmp);
++#ifdef	MDEBUG
++			printf("Sent IGMP report to: %@\n", igmp.igmp.group.s_addr);
++#endif
++			/* Don't send another igmp report until asked */
++			igmptable[i].time = 0;
++		}
++	}
++}
++
++static void process_igmp(struct iphdr *ip, unsigned long now)
++{
++	struct igmp *igmp;
++	int i;
++	unsigned iplen = 0;
++	if (!ip || (ip->protocol == IP_IGMP) ||
++		(nic.packetlen < sizeof(struct iphdr) + sizeof(struct igmp))) {
++		return;
++	}
++	iplen = (ip->verhdrlen & 0xf)*4;
++	igmp = (struct igmp *)&nic.packet[sizeof(struct iphdr)];
++	if (ipchksum(igmp, ntohs(ip->len) - iplen) != 0)
++		return;
++	if ((igmp->type == IGMP_QUERY) && 
++		(ip->dest.s_addr == htonl(GROUP_ALL_HOSTS))) {
++		unsigned long interval = IGMP_INTERVAL;
++		if (igmp->response_time == 0) {
++			last_igmpv1 = now;
++		} else {
++			interval = (igmp->response_time * TICKS_PER_SEC)/10;
++		}
++		
++#ifdef	MDEBUG
++		printf("Received IGMP query for: %@\n", igmp->group.s_addr);
++#endif			       
++		for(i = 0; i < MAX_IGMP; i++) {
++			uint32_t group = igmptable[i].group.s_addr;
++			if ((group == 0) || (group == igmp->group.s_addr)) {
++				unsigned long time;
++				time = currticks() + rfc1112_sleep_interval(interval, 0);
++				if (time < igmptable[i].time) {
++					igmptable[i].time = time;
++				}
++			}
++		}
++	}
++	if (((igmp->type == IGMPv1_REPORT) || (igmp->type == IGMPv2_REPORT)) &&
++		(ip->dest.s_addr == igmp->group.s_addr)) {
++#ifdef	MDEBUG
++		printf("Received IGMP report for: %@\n", igmp->group.s_addr);
++#endif			       
++		for(i = 0; i < MAX_IGMP; i++) {
++			if ((igmptable[i].group.s_addr == igmp->group.s_addr) &&
++				igmptable[i].time != 0) {
++				igmptable[i].time = 0;
++			}
++		}
++	}
++}
++
++void leave_group(int slot)
++{
++	/* Be very stupid and always send a leave group message if 
++	 * I have subscribed.  Imperfect but it is standards
++	 * compliant, easy and reliable to implement.
++	 *
++	 * The optimal group leave method is to only send leave when,
++	 * we were the last host to respond to a query on this group,
++	 * and igmpv1 compatibility is not enabled.
++	 */
++	if (igmptable[slot].group.s_addr) {
++		struct igmp_ip_t igmp;
++		igmp.router_alert[0] = 0x94;
++		igmp.router_alert[1] = 0x04;
++		igmp.router_alert[2] = 0;
++		igmp.router_alert[3] = 0;
++		build_ip_hdr(htonl(GROUP_ALL_HOSTS),
++			1, IP_IGMP, sizeof(igmp.router_alert), sizeof(igmp), &igmp);
++		igmp.igmp.type = IGMP_LEAVE;
++		igmp.igmp.response_time = 0;
++		igmp.igmp.chksum = 0;
++		igmp.igmp.group.s_addr = igmptable[slot].group.s_addr;
++		igmp.igmp.chksum = ipchksum(&igmp.igmp, sizeof(igmp));
++		ip_transmit(sizeof(igmp), &igmp);
++#ifdef	MDEBUG
++		printf("Sent IGMP leave for: %@\n", igmp.igmp.group.s_addr);
++#endif	
++	}
++	memset(&igmptable[slot], 0, sizeof(igmptable[0]));
++}
++
++void join_group(int slot, unsigned long group)
++{
++	/* I have already joined */
++	if (igmptable[slot].group.s_addr == group)
++		return;
++	if (igmptable[slot].group.s_addr) {
++		leave_group(slot);
++	}
++	/* Only join a group if we are given a multicast ip, this way
++	 * code can be given a non-multicast (broadcast or unicast ip)
++	 * and still work... 
++	 */
++	if ((group & htonl(MULTICAST_MASK)) == htonl(MULTICAST_NETWORK)) {
++		igmptable[slot].group.s_addr = group;
++		igmptable[slot].time = currticks();
++	}
++}
++#else
++#define send_igmp_reports(now);
++#define process_igmp(ip, now)
++#endif
++
++/**************************************************************************
++AWAIT_REPLY - Wait until we get a response for our request
++************f**************************************************************/
++int await_reply(reply_t reply, int ival, void *ptr, long timeout)
++{
++	unsigned long time, now;
++	struct	iphdr *ip;
++	unsigned iplen = 0;
++	struct	udphdr *udp;
++	unsigned short ptype;
++	int result;
++
++	user_abort = 0;
++
++	time = timeout + currticks();
++	/* The timeout check is done below.  The timeout is only checked if
++	 * there is no packet in the Rx queue.  This assumes that eth_poll()
++	 * needs a negligible amount of time.  
++	 */
++	for (;;) {
++		now = currticks();
++		send_igmp_reports(now);
++		result = eth_poll(1);
++		if (result == 0) {
++			/* We don't have anything */
++		
++			/* Check for abort key only if the Rx queue is empty -
++			 * as long as we have something to process, don't
++			 * assume that something failed.  It is unlikely that
++			 * we have no processing time left between packets.  */
++			poll_interruptions();
++			/* Do the timeout after at least a full queue walk.  */
++			if ((timeout == 0) || (currticks() > time) || user_abort == 1) {
++				break;
++			}
++			continue;
++		}
++	
++		/* We have something! */
++
++		/* Find the Ethernet packet type */
++		if (nic.packetlen >= ETH_HLEN) {
++			ptype = ((unsigned short) nic.packet[12]) << 8
++				| ((unsigned short) nic.packet[13]);
++		} else continue; /* what else could we do with it? */
++		/* Verify an IP header */
++		ip = 0;
++		if ((ptype == IP) && (nic.packetlen >= ETH_HLEN + sizeof(struct iphdr))) {
++			unsigned ipoptlen;
++			ip = (struct iphdr *)&nic.packet[ETH_HLEN];
++			if ((ip->verhdrlen < 0x45) || (ip->verhdrlen > 0x4F)) 
++				continue;
++			iplen = (ip->verhdrlen & 0xf) * 4;
++			if (ipchksum(ip, iplen) != 0)
++				continue;
++			if (ip->frags & htons(0x3FFF)) {
++				static int warned_fragmentation = 0;
++				if (!warned_fragmentation) {
++					printf("ALERT: got a fragmented packet - reconfigure your server\n");
++					warned_fragmentation = 1;
++				}
++				continue;
++			}
++			if (ntohs(ip->len) > ETH_MAX_MTU)
++				continue;
++
++			ipoptlen = iplen - sizeof(struct iphdr);
++			if (ipoptlen) {
++				/* Delete the ip options, to guarantee
++				 * good alignment, and make etherboot simpler.
++				 */
++				memmove(&nic.packet[ETH_HLEN + sizeof(struct iphdr)], 
++					&nic.packet[ETH_HLEN + iplen],
++					nic.packetlen - ipoptlen);
++				nic.packetlen -= ipoptlen;
++			}
++		}
++		udp = 0;
++		if (ip && (ip->protocol == IP_UDP) && 
++		    (nic.packetlen >= ETH_HLEN + sizeof(struct iphdr) + sizeof(struct udphdr))) {
++			udp = (struct udphdr *)&nic.packet[ETH_HLEN + sizeof(struct iphdr)];
++			
++			/* Make certain we have a reasonable packet length */
++			if (ntohs(udp->len) > (ntohs(ip->len) - iplen))
++				continue;
++
++			if (udp->chksum && udpchksum(ip, udp)) {
++				printf("UDP checksum error\n");
++				continue;
++			}
++		}
++		result = reply(ival, ptr, ptype, ip, udp);
++		if (result > 0) {
++			return result;
++		}
++		
++		/* If it isn't a packet the upper layer wants see if there is a default
++		 * action.  This allows us reply to arp and igmp queryies.
++		 */
++		if ((ptype == ARP) &&
++		    (nic.packetlen >= ETH_HLEN + sizeof(struct arprequest))) {
++			struct	arprequest *arpreply;
++			unsigned long tmp;
++			
++			arpreply = (struct arprequest *)&nic.packet[ETH_HLEN];
++			memcpy(&tmp, arpreply->tipaddr, sizeof(in_addr));
++			if ((arpreply->opcode == htons(ARP_REQUEST)) &&
++			    (tmp == arptable[ARP_CLIENT].ipaddr.s_addr)) {
++				arpreply->opcode = htons(ARP_REPLY);
++				memcpy(arpreply->tipaddr, arpreply->sipaddr, sizeof(in_addr));
++				memcpy(arpreply->thwaddr, arpreply->shwaddr, ETH_ALEN);
++				memcpy(arpreply->sipaddr, &arptable[ARP_CLIENT].ipaddr, sizeof(in_addr));
++				memcpy(arpreply->shwaddr, arptable[ARP_CLIENT].node, ETH_ALEN);
++				eth_transmit(arpreply->thwaddr, ARP,
++					     sizeof(struct  arprequest),
++					     arpreply);
++#ifdef	MDEBUG
++				memcpy(&tmp, arpreply->tipaddr, sizeof(in_addr));
++				printf("Sent ARP reply to: %@\n",tmp);
++#endif	/* MDEBUG */
++			}
++		}
++		process_igmp(ip, now);
++	}
++	return(0);
++}
++
++#ifdef	REQUIRE_VCI_ETHERBOOT
++/**************************************************************************
++FIND_VCI_ETHERBOOT - Looks for "Etherboot" in Vendor Encapsulated Identifiers
++On entry p points to byte count of VCI options
++**************************************************************************/
++static int find_vci_etherboot(unsigned char *p)
++{
++	unsigned char	*end = p + 1 + *p;
++
++	for (p++; p < end; ) {
++		if (*p == RFC2132_VENDOR_CLASS_ID) {
++			if (strncmp("Etherboot", p + 2, sizeof("Etherboot") - 1) == 0)
++				return (1);
++		} else if (*p == RFC1533_END)
++			return (0);
++		p += TAG_LEN(p) + 2;
++	}
++	return (0);
++}
++#endif	/* REQUIRE_VCI_ETHERBOOT */
++
++/**
++ * decode_rfc1533
++ *
++ * Decodes RFC1533 header
++ **/
++int decode_rfc1533(unsigned char *p, unsigned int block, unsigned int len, int eof)
++{
++	static unsigned char *extdata = NULL, *extend = NULL;
++	unsigned char        *extpath = NULL;
++	unsigned char        *endp;
++
++	if (block == 0) {
++		end_of_rfc1533 = NULL;
++		if (memcmp(p, rfc1533_cookie, sizeof(rfc1533_cookie)))
++			return(0); /* no RFC 1533 header found */
++		p += 4;
++		endp = p + len;
++	} else {
++		if (block == 1) {
++			if (memcmp(p, rfc1533_cookie, sizeof(rfc1533_cookie)))
++				return(0); /* no RFC 1533 header found */
++			p += 4;
++			len -= 4; }
++		if (extend + len <= (unsigned char *)
++		    rfc1533_venddata + sizeof(rfc1533_venddata)) {
++			memcpy(extend, p, len);
++			extend += len;
++		} else {
++			printf("Overflow in vendor data buffer! Aborting...\n");
++			*extdata = RFC1533_END;
++			return(0);
++		}
++		p = extdata; endp = extend;
++	}
++	if (!eof)
++		return 1;
++	while (p < endp) {
++		unsigned char c = *p;
++		if (c == RFC1533_PAD) {
++			p++;
++			continue;
++		}
++		else if (c == RFC1533_END) {
++			end_of_rfc1533 = endp = p;
++			continue;
++		}
++		else if (c == RFC1533_NETMASK)
++			memcpy(&netmask, p+2, sizeof(in_addr));
++		else if (c == RFC1533_GATEWAY) {
++			/* This is a little simplistic, but it will
++			   usually be sufficient.
++			   Take only the first entry */
++			if (TAG_LEN(p) >= sizeof(in_addr))
++				memcpy(&arptable[ARP_GATEWAY].ipaddr, p+2, sizeof(in_addr));
++		}
++		else if (c == RFC1533_EXTENSIONPATH)
++			extpath = p;
++		else if (c == RFC2132_MSG_TYPE)
++			dhcp_reply=*(p+2);
++		else if (c == RFC2132_SRV_ID)
++			memcpy(&dhcp_server, p+2, sizeof(in_addr));
++		else if (c == RFC1533_HOSTNAME) {
++			hostname = p + 2;
++			hostnamelen = *(p + 1);
++		}
++		else if (c == RFC1533_VENDOR_CONFIGFILE){
++			int l = TAG_LEN (p);
++	  
++			/* Eliminate the trailing NULs according to RFC 2132.  */
++			while (*(p + 2 + l - 1) == '\000' && l > 0)
++				l--;
++	  
++			/* XXX: Should check if LEN is less than the maximum length
++			   of CONFIG_FILE. This kind of robustness will be a goal
++			   in GRUB 1.0.  */
++			memcpy (config_file, p + 2, l);
++			config_file[l] = 0;
++		}
++		else {
++			;
++		}
++		p += TAG_LEN(p) + 2;
++	}
++	extdata = extend = endp;
++	if (block <= 0 && extpath != NULL) {
++		char fname[64];
++		if (TAG_LEN(extpath) >= sizeof(fname)){
++			printf("Overflow in vendor data buffer! Aborting...\n");
++			*extdata = RFC1533_END;
++			return(0);
++		}
++		memcpy(fname, extpath+2, TAG_LEN(extpath));
++		fname[(int)TAG_LEN(extpath)] = '\0';
++		printf("Loading BOOTP-extension file: %s\n",fname);
++		tftp_file_read(fname, decode_rfc1533);
++	}
++	return 1;	/* proceed with next block */
++}
++
++
++/* FIXME double check TWO_SECOND_DIVISOR */
++#define TWO_SECOND_DIVISOR (RAND_MAX/TICKS_PER_SEC)
++/**************************************************************************
++RFC2131_SLEEP_INTERVAL - sleep for expotentially longer times (base << exp) +- 1 sec)
++**************************************************************************/
++long rfc2131_sleep_interval(long base, int exp)
++{
++	unsigned long tmo;
++#ifdef BACKOFF_LIMIT
++	if (exp > BACKOFF_LIMIT)
++		exp = BACKOFF_LIMIT;
++#endif
++	tmo = (base << exp) + (TICKS_PER_SEC - (random()/TWO_SECOND_DIVISOR));
++	return tmo;
++}
++
++#ifdef MULTICAST_LEVEL2
++/**************************************************************************
++RFC1112_SLEEP_INTERVAL - sleep for expotentially longer times, up to (base << exp)
++**************************************************************************/
++long rfc1112_sleep_interval(long base, int exp)
++{
++	unsigned long divisor, tmo;
++#ifdef BACKOFF_LIMIT
++	if (exp > BACKOFF_LIMIT)
++		exp = BACKOFF_LIMIT;
++#endif
++	divisor = RAND_MAX/(base << exp);
++	tmo = random()/divisor;
++	return tmo;
++}
++#endif /* MULTICAST_LEVEL_2 */
++/* ifconfig - configure network interface.  */
++int
++ifconfig (char *ip, char *sm, char *gw, char *svr)
++{
++  in_addr tmp;
++  
++  if (sm) 
++    {
++      if (! inet_aton (sm, &tmp))
++	return 0;
++      
++      netmask = tmp.s_addr;
++    }
++  
++  if (ip) 
++    {
++      if (! inet_aton (ip, &arptable[ARP_CLIENT].ipaddr)) 
++	return 0;
++      
++      if (! netmask && ! sm) 
++	netmask = default_netmask ();
++    }
++  
++  if (gw && ! inet_aton (gw, &arptable[ARP_GATEWAY].ipaddr)) 
++    return 0;
++
++  /* Clear out the ARP entry.  */
++  grub_memset (arptable[ARP_GATEWAY].node, 0, ETH_ALEN);
++  
++  if (svr && ! inet_aton (svr, &arptable[ARP_SERVER].ipaddr)) 
++    return 0;
++
++  /* Likewise.  */
++  grub_memset (arptable[ARP_SERVER].node, 0, ETH_ALEN);
++  
++  if (ip || sm)
++    {
++      if (IP_BROADCAST == (netmask | arptable[ARP_CLIENT].ipaddr.s_addr)
++	  || netmask == (netmask | arptable[ARP_CLIENT].ipaddr.s_addr)
++	  || ! netmask)
++	network_ready = 0;
++      else
++	network_ready = 1;
++    }
++  
++  return 1;
++}
++
++/*
++ * print_network_configuration
++ *
++ * Output the network configuration. It may broke the graphic console now.:-(
++ */
++void print_network_configuration (void)
++{
++	EnterFunction("print_network_configuration");
++	if (! grub_eth_probe ())
++		grub_printf ("No ethernet card found.\n");
++	else if (! network_ready)
++		grub_printf ("Not initialized yet.\n");
++	else {
++		etherboot_printf ("Address: %@\n", arptable[ARP_CLIENT].ipaddr.s_addr);
++		etherboot_printf ("Netmask: %@\n", netmask);
++		etherboot_printf ("Server: %@\n", arptable[ARP_SERVER].ipaddr.s_addr);
++		etherboot_printf ("Gateway: %@\n", arptable[ARP_GATEWAY].ipaddr.s_addr);
++	}
++	LeaveFunction("print_network_configuration");
++}
++
++/**
++ * cleanup_net
++ *
++ * Mark network unusable, and disable NICs
++ */
++void cleanup_net (void)
++{
++	if (network_ready){
++		/* Stop receiving packets.  */
++		eth_disable ();
++		network_ready = 0;
++	}
++}
+diff -Naur grub-0.97.orig/netboot/nic.h grub-0.97/netboot/nic.h
+--- grub-0.97.orig/netboot/nic.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/nic.h	2005-08-31 19:03:35.000000000 +0000
+@@ -8,24 +8,38 @@
+ #ifndef	NIC_H
+ #define NIC_H
+ 
++#include "dev.h"
++
++typedef enum {
++	DISABLE = 0,
++	ENABLE,
++	FORCE
++} irq_action_t;
++
+ /*
+  *	Structure returned from eth_probe and passed to other driver
+  *	functions.
+  */
+-
+ struct nic
+ {
+-	void		(*reset)P((struct nic *));
+-	int		(*poll)P((struct nic *));
++	struct dev	dev;  /* This must come first */
++	int		(*poll)P((struct nic *, int retrieve));
+ 	void		(*transmit)P((struct nic *, const char *d,
+ 				unsigned int t, unsigned int s, const char *p));
+-	void		(*disable)P((struct nic *));
++	void		(*irq)P((struct nic *, irq_action_t));
+ 	int		flags;	/* driver specific flags */
+ 	struct rom_info	*rom_info;	/* -> rom_info from main */
+ 	unsigned char	*node_addr;
+-	char		*packet;
++	unsigned char	*packet;
+ 	unsigned int	packetlen;
++	unsigned int	ioaddr;
++	unsigned char	irqno;
+ 	void		*priv_data;	/* driver can hang private data here */
+ };
+ 
++extern int  eth_probe(struct dev *dev);
++extern int  eth_poll(int retrieve);
++extern void eth_transmit(const char *d, unsigned int t, unsigned int s, const void *p);
++extern void eth_disable(void);
++extern void eth_irq(irq_action_t action);
+ #endif	/* NIC_H */
+diff -Naur grub-0.97.orig/netboot/ns83820.c grub-0.97/netboot/ns83820.c
+--- grub-0.97.orig/netboot/ns83820.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/ns83820.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,1020 @@
++/**************************************************************************
++*    ns83820.c: Etherboot device driver for the National Semiconductor 83820
++*    Written 2004 by Timothy Legge <tlegge@rogers.com>
++*
++*    This program is free software; you can redistribute it and/or modify
++*    it under the terms of the GNU General Public License as published by
++*    the Free Software Foundation; either version 2 of the License, or
++*    (at your option) any later version.
++*
++*    This program is distributed in the hope that it will be useful,
++*    but WITHOUT ANY WARRANTY; without even the implied warranty of
++*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++*    GNU General Public License for more details.
++*
++*    You should have received a copy of the GNU General Public License
++*    along with this program; if not, write to the Free Software
++*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*
++*    Portions of this code based on:
++*	ns83820.c by Benjamin LaHaise with contributions
++* 		for Linux kernel 2.4.x.
++*	
++*    Linux Driver Version 0.20, 20020610
++* 
++*    This development of this Etherboot driver was funded by:
++*
++*    NXTV: http://www.nxtv.com/
++*    	
++*    REVISION HISTORY:
++*    ================
++*
++*    v1.0	02-16-2004	timlegge	Initial port of Linux driver
++*    v1.1	02-19-2004	timlegge	More rohbust transmit and poll
++*    
++*    Indent Options: indent -kr -i8
++***************************************************************************/
++
++/* to get some global routines like printf */
++#include "etherboot.h"
++/* to get the interface to the body of the program */
++#include "nic.h"
++/* to get the PCI support functions, if this is a PCI NIC */
++#include "pci.h"
++
++#if ARCH == ia64		/* Support 64-bit addressing */
++#define USE_64BIT_ADDR
++#endif
++
++//#define DDEBUG
++#ifdef DDEBUG
++#define dprintf(x) printf x
++#else
++#define dprintf(x)
++#endif
++
++typedef unsigned char u8;
++typedef signed char s8;
++typedef unsigned short u16;
++typedef signed short s16;
++typedef unsigned int u32;
++typedef signed int s32;
++
++#define HZ 100
++
++/* Condensed operations for readability. */
++#define virt_to_le32desc(addr)  cpu_to_le32(virt_to_bus(addr))
++#define le32desc_to_virt(addr)  bus_to_virt(le32_to_cpu(addr))
++
++/* NIC specific static variables go here */
++
++/* Global parameters.  See MODULE_PARM near the bottom. */
++// static int ihr = 2;
++static int reset_phy = 0;
++static int lnksts = 0;		/* CFG_LNKSTS bit polarity */
++
++#if defined(CONFIG_HIGHMEM64G) || defined(__ia64__)
++#define USE_64BIT_ADDR	"+"
++#endif
++
++#if defined(USE_64BIT_ADDR)
++#define TRY_DAC	1
++#else
++#define TRY_DAC	0
++#endif
++
++/* tunables */
++#define RX_BUF_SIZE	1500	/* 8192 */
++
++/* Must not exceed ~65000. */
++#define NR_RX_DESC	64
++#define NR_TX_DESC	1
++
++		   /* not tunable *//* Extra 6 bytes for 64 bit alignment (divisable by 8) */
++#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14 + 6)	/* rx/tx mac addr + type */
++
++#define MIN_TX_DESC_FREE	8
++
++/* register defines */
++#define CFGCS		0x04
++
++#define CR_TXE		0x00000001
++#define CR_TXD		0x00000002
++/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE
++ * The Receive engine skips one descriptor and moves
++ * onto the next one!! */
++#define CR_RXE		0x00000004
++#define CR_RXD		0x00000008
++#define CR_TXR		0x00000010
++#define CR_RXR		0x00000020
++#define CR_SWI		0x00000080
++#define CR_RST		0x00000100
++
++#define PTSCR_EEBIST_FAIL       0x00000001
++#define PTSCR_EEBIST_EN         0x00000002
++#define PTSCR_EELOAD_EN         0x00000004
++#define PTSCR_RBIST_FAIL        0x000001b8
++#define PTSCR_RBIST_DONE        0x00000200
++#define PTSCR_RBIST_EN          0x00000400
++#define PTSCR_RBIST_RST         0x00002000
++
++#define MEAR_EEDI		0x00000001
++#define MEAR_EEDO		0x00000002
++#define MEAR_EECLK		0x00000004
++#define MEAR_EESEL		0x00000008
++#define MEAR_MDIO		0x00000010
++#define MEAR_MDDIR		0x00000020
++#define MEAR_MDC		0x00000040
++
++#define ISR_TXDESC3	0x40000000
++#define ISR_TXDESC2	0x20000000
++#define ISR_TXDESC1	0x10000000
++#define ISR_TXDESC0	0x08000000
++#define ISR_RXDESC3	0x04000000
++#define ISR_RXDESC2	0x02000000
++#define ISR_RXDESC1	0x01000000
++#define ISR_RXDESC0	0x00800000
++#define ISR_TXRCMP	0x00400000
++#define ISR_RXRCMP	0x00200000
++#define ISR_DPERR	0x00100000
++#define ISR_SSERR	0x00080000
++#define ISR_RMABT	0x00040000
++#define ISR_RTABT	0x00020000
++#define ISR_RXSOVR	0x00010000
++#define ISR_HIBINT	0x00008000
++#define ISR_PHY		0x00004000
++#define ISR_PME		0x00002000
++#define ISR_SWI		0x00001000
++#define ISR_MIB		0x00000800
++#define ISR_TXURN	0x00000400
++#define ISR_TXIDLE	0x00000200
++#define ISR_TXERR	0x00000100
++#define ISR_TXDESC	0x00000080
++#define ISR_TXOK	0x00000040
++#define ISR_RXORN	0x00000020
++#define ISR_RXIDLE	0x00000010
++#define ISR_RXEARLY	0x00000008
++#define ISR_RXERR	0x00000004
++#define ISR_RXDESC	0x00000002
++#define ISR_RXOK	0x00000001
++
++#define TXCFG_CSI	0x80000000
++#define TXCFG_HBI	0x40000000
++#define TXCFG_MLB	0x20000000
++#define TXCFG_ATP	0x10000000
++#define TXCFG_ECRETRY	0x00800000
++#define TXCFG_BRST_DIS	0x00080000
++#define TXCFG_MXDMA1024	0x00000000
++#define TXCFG_MXDMA512	0x00700000
++#define TXCFG_MXDMA256	0x00600000
++#define TXCFG_MXDMA128	0x00500000
++#define TXCFG_MXDMA64	0x00400000
++#define TXCFG_MXDMA32	0x00300000
++#define TXCFG_MXDMA16	0x00200000
++#define TXCFG_MXDMA8	0x00100000
++
++#define CFG_LNKSTS	0x80000000
++#define CFG_SPDSTS	0x60000000
++#define CFG_SPDSTS1	0x40000000
++#define CFG_SPDSTS0	0x20000000
++#define CFG_DUPSTS	0x10000000
++#define CFG_TBI_EN	0x01000000
++#define CFG_MODE_1000	0x00400000
++/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy.
++ * Read the Phy response and then configure the MAC accordingly */
++#define CFG_AUTO_1000	0x00200000
++#define CFG_PINT_CTL	0x001c0000
++#define CFG_PINT_DUPSTS	0x00100000
++#define CFG_PINT_LNKSTS	0x00080000
++#define CFG_PINT_SPDSTS	0x00040000
++#define CFG_TMRTEST	0x00020000
++#define CFG_MRM_DIS	0x00010000
++#define CFG_MWI_DIS	0x00008000
++#define CFG_T64ADDR	0x00004000
++#define CFG_PCI64_DET	0x00002000
++#define CFG_DATA64_EN	0x00001000
++#define CFG_M64ADDR	0x00000800
++#define CFG_PHY_RST	0x00000400
++#define CFG_PHY_DIS	0x00000200
++#define CFG_EXTSTS_EN	0x00000100
++#define CFG_REQALG	0x00000080
++#define CFG_SB		0x00000040
++#define CFG_POW		0x00000020
++#define CFG_EXD		0x00000010
++#define CFG_PESEL	0x00000008
++#define CFG_BROM_DIS	0x00000004
++#define CFG_EXT_125	0x00000002
++#define CFG_BEM		0x00000001
++
++#define EXTSTS_UDPPKT	0x00200000
++#define EXTSTS_TCPPKT	0x00080000
++#define EXTSTS_IPPKT	0x00020000
++
++#define SPDSTS_POLARITY	(CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0))
++
++#define MIBC_MIBS	0x00000008
++#define MIBC_ACLR	0x00000004
++#define MIBC_FRZ	0x00000002
++#define MIBC_WRN	0x00000001
++
++#define PCR_PSEN	(1 << 31)
++#define PCR_PS_MCAST	(1 << 30)
++#define PCR_PS_DA	(1 << 29)
++#define PCR_STHI_8	(3 << 23)
++#define PCR_STLO_4	(1 << 23)
++#define PCR_FFHI_8K	(3 << 21)
++#define PCR_FFLO_4K	(1 << 21)
++#define PCR_PAUSE_CNT	0xFFFE
++
++#define RXCFG_AEP	0x80000000
++#define RXCFG_ARP	0x40000000
++#define RXCFG_STRIPCRC	0x20000000
++#define RXCFG_RX_FD	0x10000000
++#define RXCFG_ALP	0x08000000
++#define RXCFG_AIRL	0x04000000
++#define RXCFG_MXDMA512	0x00700000
++#define RXCFG_DRTH	0x0000003e
++#define RXCFG_DRTH0	0x00000002
++
++#define RFCR_RFEN	0x80000000
++#define RFCR_AAB	0x40000000
++#define RFCR_AAM	0x20000000
++#define RFCR_AAU	0x10000000
++#define RFCR_APM	0x08000000
++#define RFCR_APAT	0x07800000
++#define RFCR_APAT3	0x04000000
++#define RFCR_APAT2	0x02000000
++#define RFCR_APAT1	0x01000000
++#define RFCR_APAT0	0x00800000
++#define RFCR_AARP	0x00400000
++#define RFCR_MHEN	0x00200000
++#define RFCR_UHEN	0x00100000
++#define RFCR_ULM	0x00080000
++
++#define VRCR_RUDPE	0x00000080
++#define VRCR_RTCPE	0x00000040
++#define VRCR_RIPE	0x00000020
++#define VRCR_IPEN	0x00000010
++#define VRCR_DUTF	0x00000008
++#define VRCR_DVTF	0x00000004
++#define VRCR_VTREN	0x00000002
++#define VRCR_VTDEN	0x00000001
++
++#define VTCR_PPCHK	0x00000008
++#define VTCR_GCHK	0x00000004
++#define VTCR_VPPTI	0x00000002
++#define VTCR_VGTI	0x00000001
++
++#define CR		0x00
++#define CFG		0x04
++#define MEAR		0x08
++#define PTSCR		0x0c
++#define	ISR		0x10
++#define	IMR		0x14
++#define	IER		0x18
++#define	IHR		0x1c
++#define TXDP		0x20
++#define TXDP_HI		0x24
++#define TXCFG		0x28
++#define GPIOR		0x2c
++#define RXDP		0x30
++#define RXDP_HI		0x34
++#define RXCFG		0x38
++#define PQCR		0x3c
++#define WCSR		0x40
++#define PCR		0x44
++#define RFCR		0x48
++#define RFDR		0x4c
++
++#define SRR		0x58
++
++#define VRCR		0xbc
++#define VTCR		0xc0
++#define VDR		0xc4
++#define CCSR		0xcc
++
++#define TBICR		0xe0
++#define TBISR		0xe4
++#define TANAR		0xe8
++#define TANLPAR		0xec
++#define TANER		0xf0
++#define TESR		0xf4
++
++#define TBICR_MR_AN_ENABLE	0x00001000
++#define TBICR_MR_RESTART_AN	0x00000200
++
++#define TBISR_MR_LINK_STATUS	0x00000020
++#define TBISR_MR_AN_COMPLETE	0x00000004
++
++#define TANAR_PS2 		0x00000100
++#define TANAR_PS1 		0x00000080
++#define TANAR_HALF_DUP 		0x00000040
++#define TANAR_FULL_DUP 		0x00000020
++
++#define GPIOR_GP5_OE		0x00000200
++#define GPIOR_GP4_OE		0x00000100
++#define GPIOR_GP3_OE		0x00000080
++#define GPIOR_GP2_OE		0x00000040
++#define GPIOR_GP1_OE		0x00000020
++#define GPIOR_GP3_OUT		0x00000004
++#define GPIOR_GP1_OUT		0x00000001
++
++#define LINK_AUTONEGOTIATE	0x01
++#define LINK_DOWN		0x02
++#define LINK_UP			0x04
++
++
++#define __kick_rx()	writel(CR_RXE, ns->base + CR)
++
++#define kick_rx() do { \
++	dprintf(("kick_rx: maybe kicking\n")); \
++		writel(virt_to_le32desc(&rx_ring[ns->cur_rx]), ns->base + RXDP); \
++		if (ns->next_rx == ns->next_empty) \
++			printf("uh-oh: next_rx == next_empty???\n"); \
++		__kick_rx(); \
++} while(0)
++
++
++#ifdef USE_64BIT_ADDR
++#define HW_ADDR_LEN	8
++#else
++#define HW_ADDR_LEN	4
++#endif
++
++#define CMDSTS_OWN	0x80000000
++#define CMDSTS_MORE	0x40000000
++#define CMDSTS_INTR	0x20000000
++#define CMDSTS_ERR	0x10000000
++#define CMDSTS_OK	0x08000000
++#define CMDSTS_LEN_MASK	0x0000ffff
++
++#define CMDSTS_DEST_MASK	0x01800000
++#define CMDSTS_DEST_SELF	0x00800000
++#define CMDSTS_DEST_MULTI	0x01000000
++
++#define DESC_SIZE	8	/* Should be cache line sized */
++
++#ifdef USE_64BIT_ADDR
++struct ring_desc {
++	uint64_t link;
++	uint64_t bufptr;
++	u32 cmdsts;
++	u32 extsts;		/* Extended status field */
++};
++#else
++struct ring_desc {
++	u32 link;
++	u32 bufptr;
++	u32 cmdsts;
++	u32 extsts;		/* Extended status field */
++};
++#endif
++
++/* Define the TX Descriptor */
++static struct ring_desc tx_ring[NR_TX_DESC]
++    __attribute__ ((aligned(8)));
++
++/* Create a static buffer of size REAL_RX_BUF_SIZE for each
++TX Descriptor.  All descriptors point to a
++part of this buffer */
++static unsigned char txb[NR_TX_DESC * REAL_RX_BUF_SIZE];
++
++/* Define the TX Descriptor */
++static struct ring_desc rx_ring[NR_RX_DESC]
++    __attribute__ ((aligned(8)));
++
++/* Create a static buffer of size REAL_RX_BUF_SIZE for each
++RX Descriptor   All descriptors point to a
++part of this buffer */
++static unsigned char rxb[NR_RX_DESC * REAL_RX_BUF_SIZE]
++    __attribute__ ((aligned(8)));
++
++/* Private Storage for the NIC */
++struct ns83820_private {
++	u8 *base;
++	int up;
++	long idle;
++	u32 *next_rx_desc;
++	u16 next_rx, next_empty;
++	u32 cur_rx;
++	u32 *descs;
++	unsigned ihr;
++	u32 CFG_cache;
++	u32 MEAR_cache;
++	u32 IMR_cache;
++	int linkstate;
++	u16 tx_done_idx;
++	u16 tx_idx;
++	u16 tx_intr_idx;
++	u32 phy_descs;
++	u32 *tx_descs;
++
++} nsx;
++static struct ns83820_private *ns;
++
++static void phy_intr(struct nic *nic __unused)
++{
++	static char *speeds[] =
++	    { "10", "100", "1000", "1000(?)", "1000F" };
++	u32 cfg, new_cfg;
++	u32 tbisr, tanar, tanlpar;
++	int speed, fullduplex, newlinkstate;
++
++	cfg = readl(ns->base + CFG) ^ SPDSTS_POLARITY;
++	if (ns->CFG_cache & CFG_TBI_EN) {
++		/* we have an optical transceiver */
++		tbisr = readl(ns->base + TBISR);
++		tanar = readl(ns->base + TANAR);
++		tanlpar = readl(ns->base + TANLPAR);
++		dprintf(("phy_intr: tbisr=%hX, tanar=%hX, tanlpar=%hX\n",
++			 tbisr, tanar, tanlpar));
++
++		if ((fullduplex = (tanlpar & TANAR_FULL_DUP)
++		     && (tanar & TANAR_FULL_DUP))) {
++
++			/* both of us are full duplex */
++			writel(readl(ns->base + TXCFG)
++			       | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP,
++			       ns->base + TXCFG);
++			writel(readl(ns->base + RXCFG) | RXCFG_RX_FD,
++			       ns->base + RXCFG);
++			/* Light up full duplex LED */
++			writel(readl(ns->base + GPIOR) | GPIOR_GP1_OUT,
++			       ns->base + GPIOR);
++
++		} else if (((tanlpar & TANAR_HALF_DUP)
++			    && (tanar & TANAR_HALF_DUP))
++			   || ((tanlpar & TANAR_FULL_DUP)
++			       && (tanar & TANAR_HALF_DUP))
++			   || ((tanlpar & TANAR_HALF_DUP)
++			       && (tanar & TANAR_FULL_DUP))) {
++
++			/* one or both of us are half duplex */
++			writel((readl(ns->base + TXCFG)
++				& ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP,
++			       ns->base + TXCFG);
++			writel(readl(ns->base + RXCFG) & ~RXCFG_RX_FD,
++			       ns->base + RXCFG);
++			/* Turn off full duplex LED */
++			writel(readl(ns->base + GPIOR) & ~GPIOR_GP1_OUT,
++			       ns->base + GPIOR);
++		}
++
++		speed = 4;	/* 1000F */
++
++	} else {
++		/* we have a copper transceiver */
++		new_cfg =
++		    ns->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS);
++
++		if (cfg & CFG_SPDSTS1)
++			new_cfg |= CFG_MODE_1000;
++		else
++			new_cfg &= ~CFG_MODE_1000;
++
++		speed = ((cfg / CFG_SPDSTS0) & 3);
++		fullduplex = (cfg & CFG_DUPSTS);
++
++		if (fullduplex)
++			new_cfg |= CFG_SB;
++
++		if ((cfg & CFG_LNKSTS) &&
++		    ((new_cfg ^ ns->CFG_cache) & CFG_MODE_1000)) {
++			writel(new_cfg, ns->base + CFG);
++			ns->CFG_cache = new_cfg;
++		}
++
++		ns->CFG_cache &= ~CFG_SPDSTS;
++		ns->CFG_cache |= cfg & CFG_SPDSTS;
++	}
++
++	newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN;
++
++	if (newlinkstate & LINK_UP && ns->linkstate != newlinkstate) {
++		printf("link now %s mbps, %s duplex and up.\n",
++		       speeds[speed], fullduplex ? "full" : "half");
++	} else if (newlinkstate & LINK_DOWN
++		   && ns->linkstate != newlinkstate) {
++		printf("link now down.\n");
++	}
++	ns->linkstate = newlinkstate;
++}
++static void ns83820_set_multicast(struct nic *nic __unused);
++static void ns83820_setup_rx(struct nic *nic)
++{
++	unsigned i;
++	ns->idle = 1;
++	ns->next_rx = 0;
++	ns->next_rx_desc = ns->descs;
++	ns->next_empty = 0;
++	ns->cur_rx = 0;
++
++
++	for (i = 0; i < NR_RX_DESC; i++) {
++		rx_ring[i].link = virt_to_le32desc(&rx_ring[i + 1]);
++		rx_ring[i].bufptr =
++		    virt_to_le32desc(&rxb[i * REAL_RX_BUF_SIZE]);
++		rx_ring[i].cmdsts = cpu_to_le32(REAL_RX_BUF_SIZE);
++		rx_ring[i].extsts = cpu_to_le32(0);
++	}
++//      No need to wrap the ring 
++//      rx_ring[i].link = virt_to_le32desc(&rx_ring[0]);
++	writel(0, ns->base + RXDP_HI);
++	writel(virt_to_le32desc(&rx_ring[0]), ns->base + RXDP);
++
++	dprintf(("starting receiver\n"));
++
++	writel(0x0001, ns->base + CCSR);
++	writel(0, ns->base + RFCR);
++	writel(0x7fc00000, ns->base + RFCR);
++	writel(0xffc00000, ns->base + RFCR);
++
++	ns->up = 1;
++
++	phy_intr(nic);
++
++	/* Okay, let it rip */
++	ns->IMR_cache |= ISR_PHY;
++	ns->IMR_cache |= ISR_RXRCMP;
++	//dev->IMR_cache |= ISR_RXERR;
++	//dev->IMR_cache |= ISR_RXOK;
++	ns->IMR_cache |= ISR_RXORN;
++	ns->IMR_cache |= ISR_RXSOVR;
++	ns->IMR_cache |= ISR_RXDESC;
++	ns->IMR_cache |= ISR_RXIDLE;
++	ns->IMR_cache |= ISR_TXDESC;
++	ns->IMR_cache |= ISR_TXIDLE;
++
++	// No reason to enable interupts...
++	// writel(ns->IMR_cache, ns->base + IMR);
++	// writel(1, ns->base + IER);
++	ns83820_set_multicast(nic);
++	kick_rx();
++}
++
++
++static void ns83820_do_reset(struct nic *nic __unused, u32 which)
++{
++	dprintf(("resetting chip...\n"));
++	writel(which, ns->base + CR);
++	do {
++
++	} while (readl(ns->base + CR) & which);
++	dprintf(("okay!\n"));
++}
++
++static void ns83820_reset(struct nic *nic)
++{
++	unsigned i;
++	dprintf(("ns83820_reset\n"));
++
++	writel(0, ns->base + PQCR);
++
++	ns83820_setup_rx(nic);
++
++	for (i = 0; i < NR_TX_DESC; i++) {
++		tx_ring[i].link = 0;
++		tx_ring[i].bufptr = 0;
++		tx_ring[i].cmdsts = cpu_to_le32(0);
++		tx_ring[i].extsts = cpu_to_le32(0);
++	}
++
++	ns->tx_idx = 0;
++	ns->tx_done_idx = 0;
++	writel(0, ns->base + TXDP_HI);
++	return;
++}
++static void ns83820_getmac(struct nic *nic __unused, u8 * mac)
++{
++	unsigned i;
++	for (i = 0; i < 3; i++) {
++		u32 data;
++		/* Read from the perfect match memory: this is loaded by
++		 * the chip from the EEPROM via the EELOAD self test.
++		 */
++		writel(i * 2, ns->base + RFCR);
++		data = readl(ns->base + RFDR);
++		*mac++ = data;
++		*mac++ = data >> 8;
++	}
++}
++
++static void ns83820_set_multicast(struct nic *nic __unused)
++{
++	u8 *rfcr = ns->base + RFCR;
++	u32 and_mask = 0xffffffff;
++	u32 or_mask = 0;
++	u32 val;
++
++	/* Support Multicast */
++	and_mask &= ~(RFCR_AAU | RFCR_AAM);
++	or_mask |= RFCR_AAM;
++	val = (readl(rfcr) & and_mask) | or_mask;
++	/* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */
++	writel(val & ~RFCR_RFEN, rfcr);
++	writel(val, rfcr);
++
++}
++static void ns83820_run_bist(struct nic *nic __unused, const char *name,
++			     u32 enable, u32 done, u32 fail)
++{
++	int timed_out = 0;
++	long start;
++	u32 status;
++	int loops = 0;
++
++	dprintf(("start %s\n", name))
++
++	    start = currticks();
++
++	writel(enable, ns->base + PTSCR);
++	for (;;) {
++		loops++;
++		status = readl(ns->base + PTSCR);
++		if (!(status & enable))
++			break;
++		if (status & done)
++			break;
++		if (status & fail)
++			break;
++		if ((currticks() - start) >= HZ) {
++			timed_out = 1;
++			break;
++		}
++	}
++
++	if (status & fail)
++		printf("%s failed! (0x%hX & 0x%hX)\n", name, status, fail);
++	else if (timed_out)
++		printf("run_bist %s timed out! (%hX)\n", name, status);
++	dprintf(("done %s in %d loops\n", name, loops));
++}
++
++/*************************************
++Check Link
++*************************************/
++static void ns83820_check_intr(struct nic *nic) {
++	int i;
++	u32 isr = readl(ns->base + ISR);
++	if(ISR_PHY & isr)
++		phy_intr(nic);
++	if(( ISR_RXIDLE | ISR_RXDESC | ISR_RXERR) & isr)
++		kick_rx();
++	for (i = 0; i < NR_RX_DESC; i++) {
++		if (rx_ring[i].cmdsts == CMDSTS_OWN) {
++//			rx_ring[i].link = virt_to_le32desc(&rx_ring[i + 1]);
++			rx_ring[i].cmdsts = cpu_to_le32(REAL_RX_BUF_SIZE);
++		}
++	}
++}
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int ns83820_poll(struct nic *nic, int retrieve)
++{
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++	u32 cmdsts;
++	int entry = ns->cur_rx;
++
++	ns83820_check_intr(nic);
++
++	cmdsts = le32_to_cpu(rx_ring[entry].cmdsts);
++
++	if ( ! ( (CMDSTS_OWN & (cmdsts)) && (cmdsts != (CMDSTS_OWN)) ) )
++	  return 0;
++
++	if ( ! retrieve ) return 1;
++
++	if (! (CMDSTS_OK & cmdsts) )
++	  return 0;
++
++	nic->packetlen = cmdsts & 0xffff;
++	memcpy(nic->packet,
++	       rxb + (entry * REAL_RX_BUF_SIZE),
++	       nic->packetlen);
++	//			rx_ring[entry].link = 0;
++	rx_ring[entry].cmdsts = cpu_to_le32(CMDSTS_OWN);
++
++	ns->cur_rx = ++ns->cur_rx % NR_RX_DESC;
++
++	if (ns->cur_rx == 0)	/* We have wrapped the ring */
++	  kick_rx();
++
++	return 1;
++}
++
++static inline void kick_tx(struct nic *nic __unused)
++{
++	dprintf(("kick_tx\n"));
++	writel(CR_TXE, ns->base + CR);
++}
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void ns83820_transmit(struct nic *nic, const char *d,	/* Destination */
++			     unsigned int t,	/* Type */
++			     unsigned int s,	/* size */
++			     const char *p)
++{				/* Packet */
++	/* send the packet to destination */
++
++	u16 nstype;
++	u32 cmdsts, extsts;
++	int cur_tx = 0;
++	u32 isr = readl(ns->base + ISR);
++	if (ISR_TXIDLE & isr)
++		kick_tx(nic);
++	/* point to the current txb incase multiple tx_rings are used */
++	memcpy(txb, d, ETH_ALEN);
++	memcpy(txb + ETH_ALEN, nic->node_addr, ETH_ALEN);
++	nstype = htons((u16) t);
++	memcpy(txb + 2 * ETH_ALEN, (u8 *) & nstype, 2);
++	memcpy(txb + ETH_HLEN, p, s);
++	s += ETH_HLEN;
++	s &= 0x0FFF;
++	while (s < ETH_ZLEN)
++		txb[s++] = '\0';
++
++	/* Setup the transmit descriptor */
++	extsts = 0;
++	extsts |= EXTSTS_UDPPKT;
++
++	tx_ring[cur_tx].bufptr = virt_to_le32desc(&txb);
++	tx_ring[cur_tx].extsts = cpu_to_le32(extsts);
++
++	cmdsts = cpu_to_le32(0);
++	cmdsts |= cpu_to_le32(CMDSTS_OWN | s);
++	tx_ring[cur_tx].cmdsts = cpu_to_le32(cmdsts);
++
++	writel(virt_to_le32desc(&tx_ring[0]), ns->base + TXDP);
++	kick_tx(nic);
++}
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void ns83820_disable(struct dev *dev)
++{
++	/* put the card in its initial state */
++	/* This function serves 3 purposes.
++	 * This disables DMA and interrupts so we don't receive
++	 *  unexpected packets or interrupts from the card after
++	 *  etherboot has finished. 
++	 * This frees resources so etherboot may use
++	 *  this driver on another interface
++	 * This allows etherboot to reinitialize the interface
++	 *  if something is something goes wrong.
++	 */
++	/* disable interrupts */
++	writel(0, ns->base + IMR);
++	writel(0, ns->base + IER);
++	readl(ns->base + IER);
++
++	ns->up = 0;
++
++	ns83820_do_reset((struct nic *) dev, CR_RST);
++
++	ns->IMR_cache &=
++	    ~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY |
++	      ISR_RXIDLE);
++	writel(ns->IMR_cache, ns->base + IMR);
++
++	/* touch the pci bus... */
++	readl(ns->base + IMR);
++
++	/* assumes the transmitter is already disabled and reset */
++	writel(0, ns->base + RXDP_HI);
++	writel(0, ns->base + RXDP);
++}
++
++/**************************************************************************
++IRQ - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void ns83820_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++***************************************************************************/
++
++#define board_found 1
++#define valid_link 0
++static int ns83820_probe(struct dev *dev, struct pci_device *pci)
++{
++	struct nic *nic = (struct nic *) dev;
++	int sz;
++	long addr;
++	int using_dac = 0;
++
++	if (pci->ioaddr == 0)
++		return 0;
++
++	printf("ns83820.c: Found %s, vendor=0x%hX, device=0x%hX\n",
++	       pci->name, pci->vendor, pci->dev_id);
++
++	/* point to private storage */
++	ns = &nsx;
++
++	adjust_pci_device(pci);
++
++	addr = pci_bar_start(pci, PCI_BASE_ADDRESS_1);
++	sz = pci_bar_size(pci, PCI_BASE_ADDRESS_1);
++
++	ns->base = ioremap(addr, (1UL << 12));
++//      ns->base = ioremap(addr, sz);
++
++	if (!ns->base)
++		return 0;
++
++	nic->irqno  = 0;
++	nic->ioaddr = pci->ioaddr & ~3;
++
++	/* disable interrupts */
++	writel(0, ns->base + IMR);
++	writel(0, ns->base + IER);
++	readl(ns->base + IER);
++
++	ns->IMR_cache = 0;
++
++	ns83820_do_reset(nic, CR_RST);
++
++	/* Must reset the ram bist before running it */
++	writel(PTSCR_RBIST_RST, ns->base + PTSCR);
++	ns83820_run_bist(nic, "sram bist", PTSCR_RBIST_EN,
++			 PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL);
++	ns83820_run_bist(nic, "eeprom bist", PTSCR_EEBIST_EN, 0,
++			 PTSCR_EEBIST_FAIL);
++	ns83820_run_bist(nic, "eeprom load", PTSCR_EELOAD_EN, 0, 0);
++
++	/* I love config registers */
++	ns->CFG_cache = readl(ns->base + CFG);
++
++	if ((ns->CFG_cache & CFG_PCI64_DET)) {
++		printf("%s: detected 64 bit PCI data bus.\n", pci->name);
++		/*dev->CFG_cache |= CFG_DATA64_EN; */
++		if (!(ns->CFG_cache & CFG_DATA64_EN))
++			printf
++			    ("%s: EEPROM did not enable 64 bit bus.  Disabled.\n",
++			     pci->name);
++	} else
++		ns->CFG_cache &= ~(CFG_DATA64_EN);
++
++	ns->CFG_cache &= (CFG_TBI_EN | CFG_MRM_DIS | CFG_MWI_DIS |
++			  CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 |
++			  CFG_M64ADDR);
++	ns->CFG_cache |=
++	    CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS |
++	    CFG_EXTSTS_EN | CFG_EXD | CFG_PESEL;
++	ns->CFG_cache |= CFG_REQALG;
++	ns->CFG_cache |= CFG_POW;
++	ns->CFG_cache |= CFG_TMRTEST;
++
++	/* When compiled with 64 bit addressing, we must always enable
++	 * the 64 bit descriptor format.
++	 */
++#ifdef USE_64BIT_ADDR
++	ns->CFG_cache |= CFG_M64ADDR;
++#endif
++
++//FIXME: Enable section on dac or remove this
++	if (using_dac)
++		ns->CFG_cache |= CFG_T64ADDR;
++
++	/* Big endian mode does not seem to do what the docs suggest */
++	ns->CFG_cache &= ~CFG_BEM;
++
++	/* setup optical transceiver if we have one */
++	if (ns->CFG_cache & CFG_TBI_EN) {
++		dprintf(("%s: enabling optical transceiver\n", pci->name));
++		writel(readl(ns->base + GPIOR) | 0x3e8, ns->base + GPIOR);
++
++		/* setup auto negotiation feature advertisement */
++		writel(readl(ns->base + TANAR)
++		       | TANAR_HALF_DUP | TANAR_FULL_DUP,
++		       ns->base + TANAR);
++
++		/* start auto negotiation */
++		writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN,
++		       ns->base + TBICR);
++		writel(TBICR_MR_AN_ENABLE, ns->base + TBICR);
++		ns->linkstate = LINK_AUTONEGOTIATE;
++
++		ns->CFG_cache |= CFG_MODE_1000;
++	}
++	writel(ns->CFG_cache, ns->base + CFG);
++	dprintf(("CFG: %hX\n", ns->CFG_cache));
++
++	/* FIXME: reset_phy is defaulted to 0, should we reset anyway? */
++	if (reset_phy) {
++		dprintf(("%s: resetting phy\n", pci->name));
++		writel(ns->CFG_cache | CFG_PHY_RST, ns->base + CFG);
++		writel(ns->CFG_cache, ns->base + CFG);
++	}
++#if 0				/* Huh?  This sets the PCI latency register.  Should be done via 
++				 * the PCI layer.  FIXME.
++				 */
++	if (readl(dev->base + SRR))
++		writel(readl(dev->base + 0x20c) | 0xfe00,
++		       dev->base + 0x20c);
++#endif
++
++	/* Note!  The DMA burst size interacts with packet
++	 * transmission, such that the largest packet that
++	 * can be transmitted is 8192 - FLTH - burst size.
++	 * If only the transmit fifo was larger...
++	 */
++	/* Ramit : 1024 DMA is not a good idea, it ends up banging 
++	 * some DELL and COMPAQ SMP systems */
++	writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512
++	       | ((1600 / 32) * 0x100), ns->base + TXCFG);
++
++	/* Set Rx to full duplex, don't accept runt, errored, long or length
++	 * range errored packets.  Use 512 byte DMA.
++	 */
++	/* Ramit : 1024 DMA is not a good idea, it ends up banging 
++	 * some DELL and COMPAQ SMP systems 
++	 * Turn on ALP, only we are accpeting Jumbo Packets */
++	writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD
++	       | RXCFG_STRIPCRC
++	       //| RXCFG_ALP
++	       | (RXCFG_MXDMA512) | 0, ns->base + RXCFG);
++
++	/* Disable priority queueing */
++	writel(0, ns->base + PQCR);
++
++	/* Enable IP checksum validation and detetion of VLAN headers.
++	 * Note: do not set the reject options as at least the 0x102
++	 * revision of the chip does not properly accept IP fragments
++	 * at least for UDP.
++	 */
++	/* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since
++	 * the MAC it calculates the packetsize AFTER stripping the VLAN
++	 * header, and if a VLAN Tagged packet of 64 bytes is received (like
++	 * a ping with a VLAN header) then the card, strips the 4 byte VLAN
++	 * tag and then checks the packet size, so if RXCFG_ARP is not enabled,
++	 * it discrards it!.  These guys......
++	 */
++	writel(VRCR_IPEN | VRCR_VTDEN, ns->base + VRCR);
++
++	/* Enable per-packet TCP/UDP/IP checksumming */
++	writel(VTCR_PPCHK, ns->base + VTCR);
++
++	/* Ramit : Enable async and sync pause frames */
++//      writel(0, ns->base + PCR); 
++	writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K |
++		PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT),
++	       ns->base + PCR);
++
++	/* Disable Wake On Lan */
++	writel(0, ns->base + WCSR);
++
++	ns83820_getmac(nic, nic->node_addr);
++	printf("%! at ioaddr 0x%hX, ", nic->node_addr, ns->base);
++
++	if (using_dac) {
++		dprintf(("%s: using 64 bit addressing.\n", pci->name));
++	}
++
++	dprintf(("%s: DP83820 %d.%d: %! io=0x%hX\n",
++		 pci->name,
++		 (unsigned) readl(ns->base + SRR) >> 8,
++		 (unsigned) readl(ns->base + SRR) & 0xff,
++		 nic->node_addr, pci->ioaddr));
++
++#ifdef PHY_CODE_IS_FINISHED
++	ns83820_probe_phy(dev);
++#endif
++
++	ns83820_reset(nic);
++	/* point to NIC specific routines */
++	dev->disable  = ns83820_disable;
++	nic->poll     = ns83820_poll;
++	nic->transmit = ns83820_transmit;
++	nic->irq      = ns83820_irq;
++	return 1;
++}
++
++static struct pci_id ns83820_nics[] = {
++	PCI_ROM(0x100b, 0x0022, "ns83820", "National Semiconductor 83820"),
++};
++
++struct pci_driver ns83820_driver = {
++	.type = NIC_DRIVER,
++	.name = "NS83820/PCI",
++	.probe = ns83820_probe,
++	.ids = ns83820_nics,
++	.id_count = sizeof(ns83820_nics) / sizeof(ns83820_nics[0]),
++	.class = 0,
++};
+diff -Naur grub-0.97.orig/netboot/ns8390.c grub-0.97/netboot/ns8390.c
+--- grub-0.97.orig/netboot/ns8390.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/ns8390.c	2005-08-31 21:13:41.000000000 +0000
+@@ -13,11 +13,15 @@
+   the proper functioning of this software, nor do the authors assume any
+   responsibility for damages incurred with its use.
+ 
++Multicast support added by Timothy Legge (timlegge@users.sourceforge.net) 09/28/2003
++Relocation support added by Ken Yap (ken_yap@users.sourceforge.net) 28/12/02
+ 3c503 support added by Bill Paul (wpaul@ctr.columbia.edu) on 11/15/94
+ SMC8416 support added by Bill Paul (wpaul@ctr.columbia.edu) on 12/25/94
+ 3c503 PIO support added by Jim Hague (jim.hague@acm.org) on 2/17/98
+ RX overrun by Klaus Espenlaub (espenlaub@informatik.uni-ulm.de) on 3/10/99
+   parts taken from the Linux 8390 driver (by Donald Becker and Paul Gortmaker)
++SMC8416 PIO support added by Andrew Bettison (andrewb@zip.com.au) on 4/3/02
++  based on the Linux 8390 driver (by Donald Becker and Paul Gortmaker)
+ 
+ **************************************************************************/
+ 
+@@ -26,10 +30,16 @@
+ #include "ns8390.h"
+ #ifdef	INCLUDE_NS8390
+ #include "pci.h"
++#else
++#include "isa.h"
+ #endif
+-#include "cards.h"
+ 
+-static unsigned char	eth_vendor, eth_flags, eth_laar;
++typedef int Address;
++
++static unsigned char	eth_vendor, eth_flags;
++#ifdef	INCLUDE_WD
++static unsigned char	eth_laar;
++#endif
+ static unsigned short	eth_nic_base, eth_asic_base;
+ static unsigned char	eth_memsize, eth_rx_start, eth_tx_start;
+ static Address		eth_bmem, eth_rmem;
+@@ -66,6 +76,7 @@
+ #endif
+ 
+ #if	defined(INCLUDE_WD)
++#define	ASIC_PIO	WD_IAR
+ #define	eth_probe	wd_probe
+ #if	defined(INCLUDE_3C503) || defined(INCLUDE_NE) || defined(INCLUDE_NS8390)
+ Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390
+@@ -101,13 +112,16 @@
+ #endif
+ #endif
+ 
+-#if	defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM))
++#if	defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM)) || (defined(INCLUDE_WD) && defined(WD_790_PIO))
+ /**************************************************************************
+ ETH_PIO_READ - Read a frame via Programmed I/O
+ **************************************************************************/
+ static void eth_pio_read(unsigned int src, unsigned char *dst, unsigned int cnt)
+ {
+-	if (eth_flags & FLAG_16BIT) { ++cnt; cnt &= ~1; }
++#ifdef	INCLUDE_WD
++	outb(src & 0xff, eth_asic_base + WD_GP2);
++	outb(src >> 8, eth_asic_base + WD_GP2);
++#else
+ 	outb(D8390_COMMAND_RD2 |
+ 		D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
+ 	outb(cnt, eth_nic_base + D8390_P0_RBCR0);
+@@ -122,9 +136,10 @@
+ 	outb(src >> 8, eth_asic_base + _3COM_DAMSB);
+ 	outb(t503_output | _3COM_CR_START, eth_asic_base + _3COM_CR);
+ #endif
++#endif
+ 
+ 	if (eth_flags & FLAG_16BIT)
+-		cnt >>= 1;
++		cnt = (cnt + 1) >> 1;
+ 
+ 	while(cnt--) {
+ #ifdef	INCLUDE_3C503
+@@ -153,7 +168,10 @@
+ #ifdef	COMPEX_RL2000_FIX
+ 	unsigned int x;
+ #endif	/* COMPEX_RL2000_FIX */
+-	if (eth_flags & FLAG_16BIT) { ++cnt; cnt &= ~1; }
++#ifdef	INCLUDE_WD
++	outb(dst & 0xff, eth_asic_base + WD_GP2);
++	outb(dst >> 8, eth_asic_base + WD_GP2);
++#else
+ 	outb(D8390_COMMAND_RD2 |
+ 		D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
+ 	outb(D8390_ISR_RDC, eth_nic_base + D8390_P0_ISR);
+@@ -170,9 +188,10 @@
+ 
+ 	outb(t503_output | _3COM_CR_DDIR | _3COM_CR_START, eth_asic_base + _3COM_CR);
+ #endif
++#endif
+ 
+ 	if (eth_flags & FLAG_16BIT)
+-		cnt >>= 1;
++		cnt = (cnt + 1) >> 1;
+ 
+ 	while(cnt--)
+ 	{
+@@ -201,17 +220,40 @@
+ 	if (x >= COMPEX_RL2000_TRIES)
+ 		printf("Warning: Compex RL2000 aborted wait!\n");
+ #endif	/* COMPEX_RL2000_FIX */
++#ifndef	INCLUDE_WD
+ 	while((inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_RDC)
+ 		!= D8390_ISR_RDC);
+ #endif
++#endif
+ }
+ #else
+ /**************************************************************************
+ ETH_PIO_READ - Dummy routine when NE2000 not compiled in
+ **************************************************************************/
+-static void eth_pio_read(unsigned int src, unsigned char *dst, unsigned int cnt) {}
++static void eth_pio_read(unsigned int src __unused, unsigned char *dst  __unused, unsigned int cnt __unused) {}
+ #endif
+ 
++
++/**************************************************************************
++enable_multycast - Enable Multicast
++**************************************************************************/
++static void enable_multicast(unsigned short eth_nic_base) 
++{
++	unsigned char mcfilter[8];
++	int i;
++	memset(mcfilter, 0xFF, 8);
++	outb(4, eth_nic_base+D8390_P0_RCR);	
++	outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS1, eth_nic_base + D8390_P0_COMMAND);
++	for(i=0;i<8;i++)
++	{
++		outb(mcfilter[i], eth_nic_base + 8 + i);
++		if(inb(eth_nic_base + 8 + i)!=mcfilter[i])
++			printf("Error SMC 83C690 Multicast filter read/write mishap %d\n",i);
++	}
++	outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS0, eth_nic_base + D8390_P0_COMMAND);
++	outb(4 | 0x08, eth_nic_base+D8390_P0_RCR);
++}
++
+ /**************************************************************************
+ NS8390_RESET - Reset adapter
+ **************************************************************************/
+@@ -238,7 +280,14 @@
+ 	outb(eth_tx_start, eth_nic_base+D8390_P0_TPSR);
+ 	outb(eth_rx_start, eth_nic_base+D8390_P0_PSTART);
+ #ifdef	INCLUDE_WD
+-	if (eth_flags & FLAG_790) outb(0, eth_nic_base + 0x09);
++	if (eth_flags & FLAG_790) {
++#ifdef	WD_790_PIO
++		outb(0x10, eth_asic_base + 0x06); /* disable interrupts, enable PIO */
++		outb(0x01, eth_nic_base + 0x09); /* enable ring read auto-wrap */
++#else
++		outb(0, eth_nic_base + 0x09);
++#endif
++	}
+ #endif
+ 	outb(eth_memsize, eth_nic_base+D8390_P0_PSTOP);
+ 	outb(eth_memsize - 1, eth_nic_base+D8390_P0_BOUND);
+@@ -266,8 +315,10 @@
+ 		outb(D8390_COMMAND_PS0 |
+ 			D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
+ 	outb(0xFF, eth_nic_base+D8390_P0_ISR);
+-	outb(0, eth_nic_base+D8390_P0_TCR);
+-	outb(4, eth_nic_base+D8390_P0_RCR);	/* allow broadcast frames */
++	outb(0, eth_nic_base+D8390_P0_TCR);	/* transmitter on */
++	outb(4, eth_nic_base+D8390_P0_RCR);	/* allow rx broadcast frames */
++
++	enable_multicast(eth_nic_base);
+ 
+ #ifdef	INCLUDE_3C503
+         /*
+@@ -281,7 +332,7 @@
+ #endif
+ }
+ 
+-static int ns8390_poll(struct nic *nic);
++static int ns8390_poll(struct nic *nic, int retrieve);
+ 
+ #ifndef	INCLUDE_3C503
+ /**************************************************************************
+@@ -324,7 +375,7 @@
+ 
+ 	/* clear the RX ring, acknowledge overrun interrupt */
+ 	eth_drain_receiver = 1;
+-	while (ns8390_poll(nic))
++	while (ns8390_poll(nic, 1))
+ 		/* Nothing */;
+ 	eth_drain_receiver = 0;
+ 	outb(D8390_ISR_OVW, eth_nic_base+D8390_P0_ISR);
+@@ -344,50 +395,54 @@
+ 	unsigned int s,			/* size */
+ 	const char *p)			/* Packet */
+ {
++#if defined(INCLUDE_3C503) || (defined(INCLUDE_WD) && ! defined(WD_790_PIO))
++	Address		eth_vmem = bus_to_virt(eth_bmem);
++#endif
+ #ifdef	INCLUDE_3C503
+         if (!(eth_flags & FLAG_PIO)) {
+-                memcpy((char *)eth_bmem, d, ETH_ALEN);	/* dst */
+-                memcpy((char *)eth_bmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
+-                *((char *)eth_bmem+12) = t>>8;		/* type */
+-                *((char *)eth_bmem+13) = t;
+-                memcpy((char *)eth_bmem+ETH_HLEN, p, s);
++                memcpy((char *)eth_vmem, d, ETH_ALEN);	/* dst */
++                memcpy((char *)eth_vmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
++                *((char *)eth_vmem+12) = t>>8;		/* type */
++                *((char *)eth_vmem+13) = t;
++                memcpy((char *)eth_vmem+ETH_HLEN, p, s);
+                 s += ETH_HLEN;
+-                while (s < ETH_ZLEN) *((char *)eth_bmem+(s++)) = 0;
++                while (s < ETH_ZLEN) *((char *)eth_vmem+(s++)) = 0;
+         }
+ #endif
+ 
+ #ifdef	INCLUDE_WD
+-	/* Memory interface */
+ 	if (eth_flags & FLAG_16BIT) {
+ 		outb(eth_laar | WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
+ 		inb(0x84);
+ 	}
++#ifndef	WD_790_PIO
++	/* Memory interface */
+ 	if (eth_flags & FLAG_790) {
+ 		outb(WD_MSR_MENB, eth_asic_base + WD_MSR);
+ 		inb(0x84);
+ 	}
+ 	inb(0x84);
+-	memcpy((char *)eth_bmem, d, ETH_ALEN);	/* dst */
+-	memcpy((char *)eth_bmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
+-	*((char *)eth_bmem+12) = t>>8;		/* type */
+-	*((char *)eth_bmem+13) = t;
+-	memcpy((char *)eth_bmem+ETH_HLEN, p, s);
++	memcpy((char *)eth_vmem, d, ETH_ALEN);	/* dst */
++	memcpy((char *)eth_vmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
++	*((char *)eth_vmem+12) = t>>8;		/* type */
++	*((char *)eth_vmem+13) = t;
++	memcpy((char *)eth_vmem+ETH_HLEN, p, s);
+ 	s += ETH_HLEN;
+-	while (s < ETH_ZLEN) *((char *)eth_bmem+(s++)) = 0;
++	while (s < ETH_ZLEN) *((char *)eth_vmem+(s++)) = 0;
+ 	if (eth_flags & FLAG_790) {
+ 		outb(0, eth_asic_base + WD_MSR);
+ 		inb(0x84);
+ 	}
+-	if (eth_flags & FLAG_16BIT) {
+-		outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
+-		inb(0x84);
+-	}
++#else
++	inb(0x84);
++#endif
+ #endif
+ 
+ #if	defined(INCLUDE_3C503)
+-	if (eth_flags & FLAG_PIO) {
++	if (eth_flags & FLAG_PIO)
+ #endif
+-#if	defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM))
++#if	defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM)) || (defined(INCLUDE_WD) && defined(WD_790_PIO))
++	{
+ 		/* Programmed I/O */
+ 		unsigned short type;
+ 		type = (t >> 8) | (t << 8);
+@@ -398,12 +453,16 @@
+ 		eth_pio_write(p, (eth_tx_start<<8)+ETH_HLEN, s);
+ 		s += ETH_HLEN;
+ 		if (s < ETH_ZLEN) s = ETH_ZLEN;
++	}
+ #endif
+ #if	defined(INCLUDE_3C503)
+-	}
+ #endif
+ 
+ #ifdef	INCLUDE_WD
++	if (eth_flags & FLAG_16BIT) {
++		outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
++		inb(0x84);
++	}
+ 	if (eth_flags & FLAG_790)
+ 		outb(D8390_COMMAND_PS0 |
+ 			D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
+@@ -428,7 +487,7 @@
+ /**************************************************************************
+ NS8390_POLL - Wait for a frame
+ **************************************************************************/
+-static int ns8390_poll(struct nic *nic)
++static int ns8390_poll(struct nic *nic, int retrieve)
+ {
+ 	int ret = 0;
+ 	unsigned char rstat, curr, next;
+@@ -453,22 +512,27 @@
+ 	outb(D8390_COMMAND_PS0, eth_nic_base+D8390_P0_COMMAND);
+ 	if (curr >= eth_memsize) curr=eth_rx_start;
+ 	if (curr == next) return(0);
++
++	if ( ! retrieve ) return 1;
++
+ #ifdef	INCLUDE_WD
+ 	if (eth_flags & FLAG_16BIT) {
+ 		outb(eth_laar | WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
+ 		inb(0x84);
+ 	}
++#ifndef	WD_790_PIO
+ 	if (eth_flags & FLAG_790) {
+ 		outb(WD_MSR_MENB, eth_asic_base + WD_MSR);
+ 		inb(0x84);
+ 	}
++#endif
+ 	inb(0x84);
+ #endif
+ 	pktoff = next << 8;
+ 	if (eth_flags & FLAG_PIO)
+ 		eth_pio_read(pktoff, (char *)&pkthdr, 4);
+ 	else
+-		memcpy(&pkthdr, (char *)eth_rmem + pktoff, 4);
++		memcpy(&pkthdr, bus_to_virt(eth_rmem + pktoff), 4);
+ 	pktoff += sizeof(pkthdr);
+ 	/* incoming length includes FCS so must sub 4 */
+ 	len = pkthdr.len - 4;
+@@ -486,7 +550,7 @@
+ 			if (eth_flags & FLAG_PIO)
+ 				eth_pio_read(pktoff, p, frag);
+ 			else
+-				memcpy(p, (char *)eth_rmem + pktoff, frag);
++				memcpy(p, bus_to_virt(eth_rmem + pktoff), frag);
+ 			pktoff = eth_rx_start << 8;
+ 			p += frag;
+ 			len -= frag;
+@@ -495,14 +559,16 @@
+ 		if (eth_flags & FLAG_PIO)
+ 			eth_pio_read(pktoff, p, len);
+ 		else
+-			memcpy(p, (char *)eth_rmem + pktoff, len);
++			memcpy(p, bus_to_virt(eth_rmem + pktoff), len);
+ 		ret = 1;
+ 	}
+ #ifdef	INCLUDE_WD
++#ifndef	WD_790_PIO
+ 	if (eth_flags & FLAG_790) {
+ 		outb(0, eth_asic_base + WD_MSR);
+ 		inb(0x84);
+ 	}
++#endif
+ 	if (eth_flags & FLAG_16BIT) {
+ 		outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
+ 		inb(0x84);
+@@ -519,31 +585,56 @@
+ /**************************************************************************
+ NS8390_DISABLE - Turn off adapter
+ **************************************************************************/
+-static void ns8390_disable(struct nic *nic)
++static void ns8390_disable(struct dev *dev)
+ {
++	struct nic *nic = (struct nic *)dev;
++	/* reset and disable merge */
++	ns8390_reset(nic);
++}
++
++/**************************************************************************
++NS8390_IRQ - Enable, Disable, or Force interrupts
++**************************************************************************/
++static void ns8390_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
+ }
+ 
+ /**************************************************************************
+ ETH_PROBE - Look for an adapter
+ **************************************************************************/
+ #ifdef	INCLUDE_NS8390
+-struct nic *eth_probe(struct nic *nic, unsigned short *probe_addrs,
+-		      struct pci_device *pci)
++static int eth_probe (struct dev *dev, struct pci_device *pci)
+ #else
+-struct nic *eth_probe(struct nic *nic, unsigned short *probe_addrs)
++static int eth_probe (struct dev *dev, unsigned short *probe_addrs __unused)
+ #endif
+ {
++	struct nic *nic = (struct nic *)dev;
+ 	int i;
+-	struct wd_board *brd;
+-	unsigned short chksum;
+-	unsigned char c;
++#ifdef INCLUDE_NS8390
++	unsigned short pci_probe_addrs[] = { pci->ioaddr, 0 };
++	unsigned short *probe_addrs = pci_probe_addrs;
++#endif
+ 	eth_vendor = VENDOR_NONE;
+ 	eth_drain_receiver = 0;
+ 
++	nic->irqno  = 0;
++
+ #ifdef	INCLUDE_WD
++{
+ 	/******************************************************************
+ 	Search for WD/SMC cards
+ 	******************************************************************/
++	struct wd_board *brd;
++	unsigned short chksum;
++	unsigned char c;
+ 	for (eth_asic_base = WD_LOW_BASE; eth_asic_base <= WD_HIGH_BASE;
+ 		eth_asic_base += 0x20) {
+ 		chksum = 0;
+@@ -560,6 +651,9 @@
+ 	/* We've found a board */
+ 	eth_vendor = VENDOR_WD;
+ 	eth_nic_base = eth_asic_base + WD_NIC_ADDR;
++
++	nic->ioaddr = eth_nic_base;
++
+ 	c = inb(eth_asic_base+WD_BID);	/* Get board id */
+ 	for (brd = wd_boards; brd->name; brd++)
+ 		if (brd->id == c) break;
+@@ -582,8 +676,9 @@
+ 	} else
+ 		eth_bmem = WD_DEFAULT_MEM;
+ 	if (brd->id == TYPE_SMC8216T || brd->id == TYPE_SMC8216C) {
+-		*((unsigned int *)(eth_bmem + 8192)) = (unsigned int)0;
+-		if (*((unsigned int *)(eth_bmem + 8192))) {
++		/* from Linux driver, 8416BT detects as 8216 sometimes */
++		unsigned int addr = inb(eth_asic_base + 0xb);
++		if (((addr >> 4) & 3) == 0) {
+ 			brd += 2;
+ 			eth_memsize = brd->memsize;
+ 		}
+@@ -592,19 +687,27 @@
+ 	for (i=0; i<ETH_ALEN; i++) {
+ 		nic->node_addr[i] = inb(i+eth_asic_base+WD_LAR);
+ 	}
+-	printf("\n%s base %#hx, memory %#hx, addr %!\n",
+-		brd->name, eth_asic_base, eth_bmem, nic->node_addr);
++	printf("\n%s base %#hx", brd->name, eth_asic_base);
+ 	if (eth_flags & FLAG_790) {
++#ifdef	WD_790_PIO
++		printf(", PIO mode, addr %!\n", nic->node_addr);
++		eth_bmem = 0;
++		eth_flags |= FLAG_PIO;		/* force PIO mode */
++		outb(0, eth_asic_base+WD_MSR);
++#else
++		printf(", memory %#x, addr %!\n", eth_bmem, nic->node_addr);
+ 		outb(WD_MSR_MENB, eth_asic_base+WD_MSR);
+ 		outb((inb(eth_asic_base+0x04) |
+ 			0x80), eth_asic_base+0x04);
+-		outb((((unsigned)eth_bmem >> 13) & 0x0F) |
+-			(((unsigned)eth_bmem >> 11) & 0x40) |
++		outb(((unsigned)(eth_bmem >> 13) & 0x0F) |
++			((unsigned)(eth_bmem >> 11) & 0x40) |
+ 			(inb(eth_asic_base+0x0B) & 0xB0), eth_asic_base+0x0B);
+ 		outb((inb(eth_asic_base+0x04) &
+ 			~0x80), eth_asic_base+0x04);
++#endif
+ 	} else {
+-		outb((((unsigned)eth_bmem >> 13) & 0x3F) | 0x40, eth_asic_base+WD_MSR);
++		printf(", memory %#x, addr %!\n", eth_bmem, nic->node_addr);
++		outb(((unsigned)(eth_bmem >> 13) & 0x3F) | 0x40, eth_asic_base+WD_MSR);
+ 	}
+ 	if (eth_flags & FLAG_16BIT) {
+ 		if (eth_flags & FLAG_790) {
+@@ -624,8 +727,14 @@
+ 		}
+ 		inb(0x84);
+ 	}
++}
+ #endif
+ #ifdef	INCLUDE_3C503
++#ifdef	T503_AUI
++	nic->flags = 1;		/* aui */
++#else
++	nic->flags = 0;		/* no aui */
++#endif
+         /******************************************************************
+         Search for 3Com 3c503 if no WD/SMC cards
+         ******************************************************************/
+@@ -708,11 +817,12 @@
+         /* Get our ethernet address */
+ 
+                 outb(_3COM_CR_EALO | _3COM_CR_XSEL, eth_asic_base + _3COM_CR);
++		nic->ioaddr = eth_nic_base;
+                 printf("\n3Com 3c503 base %#hx, ", eth_nic_base);
+                 if (eth_flags & FLAG_PIO)
+ 			printf("PIO mode");
+                 else
+-			printf("memory %#hx", eth_bmem);
++			printf("memory %#x", eth_bmem);
+                 for (i=0; i<ETH_ALEN; i++) {
+                         nic->node_addr[i] = inb(eth_nic_base+i);
+                 }
+@@ -734,9 +844,9 @@
+          */
+ 
+ 		if (!(eth_flags & FLAG_PIO)) {
+-			memset((char *)eth_bmem, 0, 0x2000);
++			memset(bus_to_virt(eth_bmem), 0, 0x2000);
+ 			for(i = 0; i < 0x2000; ++i)
+-				if (*(((char *)eth_bmem)+i)) {
++				if (*((char *)(bus_to_virt(eth_bmem+i)))) {
+ 					printf ("Failed to clear 3c503 shared mem.\n");
+ 					return (0);
+ 				}
+@@ -749,9 +859,11 @@
+         }
+ #endif
+ #if	defined(INCLUDE_NE) || defined(INCLUDE_NS8390)
++{
+ 	/******************************************************************
+ 	Search for NE1000/2000 if no WD/SMC or 3com cards
+ 	******************************************************************/
++	unsigned char c;
+ 	if (eth_vendor == VENDOR_NONE) {
+ 		char romdata[16], testbuf[32];
+ 		int idx;
+@@ -810,23 +922,94 @@
+ 		for (i=0; i<ETH_ALEN; i++) {
+ 			nic->node_addr[i] = romdata[i + ((eth_flags & FLAG_16BIT) ? i : 0)];
+ 		}
++		nic->ioaddr = eth_nic_base;
+ 		printf("\nNE%c000 base %#hx, addr %!\n",
+ 			(eth_flags & FLAG_16BIT) ? '2' : '1', eth_nic_base,
+ 			nic->node_addr);
+ 	}
++}
+ #endif
+ 	if (eth_vendor == VENDOR_NONE)
+ 		return(0);
+         if (eth_vendor != VENDOR_3COM)
+ 		eth_rmem = eth_bmem;
+ 	ns8390_reset(nic);
+-	nic->reset = ns8390_reset;
+-	nic->poll = ns8390_poll;
++
++	dev->disable  = ns8390_disable; 
++	nic->poll     = ns8390_poll;
+ 	nic->transmit = ns8390_transmit;
+-	nic->disable = ns8390_disable;
+-	return(nic);
++	nic->irq      = ns8390_irq;
++
++        /* Based on PnP ISA map */
++#ifdef	INCLUDE_WD
++        dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR);
++        dev->devid.device_id = htons(0x812a);
++#endif
++#ifdef	INCLUDE_3C503
++        dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR);
++        dev->devid.device_id = htons(0x80f3);
++#endif
++#ifdef	INCLUDE_NE
++        dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR);
++        dev->devid.device_id = htons(0x80d6);
++#endif
++	return 1;
+ }
+ 
++#ifdef	INCLUDE_WD
++static struct isa_driver wd_driver __isa_driver = {
++	.type    = NIC_DRIVER,
++	.name    = "WD",
++	.probe   = wd_probe,
++	.ioaddrs = 0, 
++};
++#endif
++
++#ifdef	INCLUDE_3C503
++static struct isa_driver t503_driver __isa_driver = {
++	.type    = NIC_DRIVER,
++	.name    = "3C503",
++	.probe   = t503_probe,
++	.ioaddrs = 0, 
++};
++#endif
++
++#ifdef	INCLUDE_NE
++static struct isa_driver ne_driver __isa_driver = {
++	.type    = NIC_DRIVER,
++	.name    = "NE*000",
++	.probe   = ne_probe,
++	.ioaddrs = 0, 
++};
++#endif
++
++#ifdef	INCLUDE_NS8390
++static struct pci_id nepci_nics[] = {
++/* A few NE2000 PCI clones, list not exhaustive */
++PCI_ROM(0x10ec, 0x8029, "rtl8029",      "Realtek 8029"),
++PCI_ROM(0x1186, 0x0300, "dlink-528",    "D-Link DE-528"),
++PCI_ROM(0x1050, 0x0940, "winbond940",   "Winbond NE2000-PCI"),		/* Winbond 86C940 / 89C940 */
++PCI_ROM(0x1050, 0x5a5a, "winbond940f",  "Winbond W89c940F"),		/* Winbond 89C940F */
++PCI_ROM(0x11f6, 0x1401, "compexrl2000", "Compex ReadyLink 2000"),
++PCI_ROM(0x8e2e, 0x3000, "ktiet32p2",    "KTI ET32P2"),
++PCI_ROM(0x4a14, 0x5000, "nv5000sc",     "NetVin NV5000SC"),
++PCI_ROM(0x12c3, 0x0058, "holtek80232",  "Holtek HT80232"),
++PCI_ROM(0x12c3, 0x5598, "holtek80229",  "Holtek HT80229"),
++PCI_ROM(0x10bd, 0x0e34, "surecom-ne34", "Surecom NE34"),
++PCI_ROM(0x1106, 0x0926, "via86c926",    "Via 86c926"),
++};
++
++struct pci_driver nepci_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "NE2000/PCI",
++	.probe    = nepci_probe,
++	.ids      = nepci_nics,
++	.id_count = sizeof(nepci_nics)/sizeof(nepci_nics[0]),
++	.class    = 0,
++};
++
++#endif /* INCLUDE_NS8390 */
++
+ /*
+  * Local variables:
+  *  c-basic-offset: 8
+diff -Naur grub-0.97.orig/netboot/osdep.h grub-0.97/netboot/osdep.h
+--- grub-0.97.orig/netboot/osdep.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/osdep.h	2005-08-31 19:03:35.000000000 +0000
+@@ -1,94 +1,18 @@
+-#ifndef	__OSDEP_H__
+-#define __OSDEP_H__
++#ifndef	_OSDEP_H
++#define _OSDEP_H
+ 
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
++#define __unused __attribute__((unused))
++#define __aligned __attribute__((aligned(16)))
+ 
+-#define	__LITTLE_ENDIAN		/* x86 */
+-
+-/* Taken from /usr/include/linux/hfs_sysdep.h */
+-#if defined(__BIG_ENDIAN)
+-#	if !defined(__constant_htonl)
+-#		define __constant_htonl(x) (x)
+-#	endif
+-#	if !defined(__constant_htons)
+-#		define __constant_htons(x) (x)
+-#	endif
+-#elif defined(__LITTLE_ENDIAN)
+-#	if !defined(__constant_htonl)
+-#		define __constant_htonl(x) \
+-        ((unsigned long int)((((unsigned long int)(x) & 0x000000ffU) << 24) | \
+-                             (((unsigned long int)(x) & 0x0000ff00U) <<  8) | \
+-                             (((unsigned long int)(x) & 0x00ff0000U) >>  8) | \
+-                             (((unsigned long int)(x) & 0xff000000U) >> 24)))
+-#	endif
+-#	if !defined(__constant_htons)
+-#		define __constant_htons(x) \
+-        ((unsigned short int)((((unsigned short int)(x) & 0x00ff) << 8) | \
+-                              (((unsigned short int)(x) & 0xff00) >> 8)))
+-#	endif
+-#else
+-#	error "Don't know if bytes are big- or little-endian!"
+-#endif
+-
+-#define ntohl(x) \
+-(__builtin_constant_p(x) ? \
+- __constant_htonl((x)) : \
+- __swap32(x))
+-#define htonl(x) \
+-(__builtin_constant_p(x) ? \
+- __constant_htonl((x)) : \
+- __swap32(x))
+-#define ntohs(x) \
+-(__builtin_constant_p(x) ? \
+- __constant_htons((x)) : \
+- __swap16(x))
+-#define htons(x) \
+-(__builtin_constant_p(x) ? \
+- __constant_htons((x)) : \
+- __swap16(x))
+-
+-static inline unsigned long int __swap32(unsigned long int x)
+-{
+-	__asm__("xchgb %b0,%h0\n\t"
+-		"rorl $16,%0\n\t"
+-		"xchgb %b0,%h0"
+-		: "=q" (x)
+-		: "0" (x));
+-	return x;
+-}
+-
+-static inline unsigned short int __swap16(unsigned short int x)
+-{
+-	__asm__("xchgb %b0,%h0"
+-		: "=q" (x)
+-		: "0" (x));
+-	return x;
+-}
+-
+-/* Make routines available to all */
+-#define	swap32(x)	__swap32(x)
+-#define	swap16(x)	__swap16(x)
+-
+-#include "linux-asm-io.h"
+-
+-typedef	unsigned long Address;
++#include "io.h"
++#include "byteswap.h"
++#include "latch.h"
+ 
+ /* ANSI prototyping macro */
+ #ifdef	__STDC__
+-#define	P(x)	x
++#  define	P(x)	x
+ #else
+-#define	P(x)	()
++#  define	P(x)	()
+ #endif
+ 
+ #endif
+-
+-/*
+- * Local variables:
+- *  c-basic-offset: 8
+- * End:
+- */
+diff -Naur grub-0.97.orig/netboot/otulip.c grub-0.97/netboot/otulip.c
+--- grub-0.97.orig/netboot/otulip.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/otulip.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,374 +0,0 @@
+-/*
+-  Etherboot DEC Tulip driver
+-  adapted by Ken Yap from
+-
+-  FreeBSD netboot DEC 21143 driver
+-
+-  Author: David Sharp
+-    date: Nov/98
+-
+- Known to work on DEC DE500 using 21143-PC chipset.
+- Even on cards with the same chipset there can be
+- incompatablity problems with the way media selection
+- and status LED settings are done.  See comments below.
+-
+- Some code fragments were taken from verious places,
+- Ken Yap's etherboot, FreeBSD's if_de.c, and various
+- Linux related files.  DEC's manuals for the 21143 and
+- SROM format were very helpful.  The Linux de driver
+- development page has a number of links to useful
+- related information.  Have a look at:
+- ftp://cesdis.gsfc.nasa.gov/pub/linux/drivers/tulip-devel.html
+-
+-*/
+-
+-#include "etherboot.h"
+-#include "nic.h"
+-#include "pci.h"
+-#include "cards.h"
+-#include "otulip.h"
+-
+-static unsigned short vendor, dev_id;
+-static unsigned short ioaddr;
+-static unsigned int *membase;
+-static unsigned char srom[1024];
+-
+-#define BUFLEN 1536     /* must be longword divisable */
+-                        /* buffers must be longword aligned */
+-
+-/* transmit descriptor and buffer */
+-static struct txdesc txd;
+-
+-/* receive descriptor(s) and buffer(s) */
+-#define NRXD 4
+-static struct rxdesc rxd[NRXD];
+-static int rxd_tail = 0;
+-#ifdef	USE_LOWMEM_BUFFER
+-#define rxb ((char *)0x10000 - NRXD * BUFLEN)
+-#define txb ((char *)0x10000 - NRXD * BUFLEN - BUFLEN)
+-#else
+-static unsigned char rxb[NRXD * BUFLEN];
+-static unsigned char txb[BUFLEN];
+-#endif
+-
+-static unsigned char ehdr[ETH_HLEN];    /* buffer for ethernet header */
+-
+-enum tulip_offsets {
+-        CSR0=0,    CSR1=0x08, CSR2=0x10, CSR3=0x18, CSR4=0x20, CSR5=0x28,
+-        CSR6=0x30, CSR7=0x38, CSR8=0x40, CSR9=0x48, CSR10=0x50, CSR11=0x58,
+-        CSR12=0x60, CSR13=0x68, CSR14=0x70, CSR15=0x78 };
+-
+-
+-/***************************************************************************/
+-/* 21143 specific stuff  */
+-/***************************************************************************/
+-
+-/* XXX assume 33MHz PCI bus,  this is not very accurate and should be
+-   used only with gross over estimations of required delay times unless
+-   you tune UADJUST to your specific processor and I/O subsystem */
+-
+-#define UADJUST 870
+-static void udelay(unsigned long usec) {
+-  unsigned long i;
+-  for (i=((usec*UADJUST)/33)+1; i>0; i--) (void) TULIP_CSR_READ(csr_0);
+-}
+-
+-/* The following srom related code was taken from FreeBSD's if_de.c */
+-/* with minor alterations to make it work here.  the Linux code is */
+-/* better but this was easier to use */
+-
+-static void delay_300ns(void)
+-{
+-    int idx;
+-    for (idx = (300 / 33) + 1; idx > 0; idx--)
+-        (void) TULIP_CSR_READ(csr_busmode);
+-}
+-
+-#define EMIT do { TULIP_CSR_WRITE(csr_srom_mii, csr); delay_300ns(); } while (0)
+-
+-static void srom_idle(void)
+-{
+-    unsigned bit, csr;
+-
+-    csr  = SROMSEL ; EMIT;
+-    csr  = SROMSEL | SROMRD; EMIT;
+-    csr ^= SROMCS; EMIT;
+-    csr ^= SROMCLKON; EMIT;
+-    /*
+-     * Write 25 cycles of 0 which will force the SROM to be idle.
+-     */
+-    for (bit = 3 + SROM_BITWIDTH + 16; bit > 0; bit--) {
+-        csr ^= SROMCLKOFF; EMIT;    /* clock low; data not valid */
+-        csr ^= SROMCLKON; EMIT;     /* clock high; data valid */
+-    }
+-    csr ^= SROMCLKOFF; EMIT;
+-    csr ^= SROMCS; EMIT;
+-    csr  = 0; EMIT;
+-}
+-
+-static void srom_read(void)
+-{
+-    unsigned idx;
+-    const unsigned bitwidth = SROM_BITWIDTH;
+-    const unsigned cmdmask = (SROMCMD_RD << bitwidth);
+-    const unsigned msb = 1 << (bitwidth + 3 - 1);
+-    unsigned lastidx = (1 << bitwidth) - 1;
+-
+-    srom_idle();
+-
+-    for (idx = 0; idx <= lastidx; idx++) {
+-        unsigned lastbit, data, bits, bit, csr;
+-        csr  = SROMSEL ;                EMIT;
+-        csr  = SROMSEL | SROMRD;        EMIT;
+-        csr ^= SROMCSON;                EMIT;
+-        csr ^=            SROMCLKON;    EMIT;
+-
+-        lastbit = 0;
+-        for (bits = idx|cmdmask, bit = bitwidth + 3; bit > 0; bit--, bits <<= 1)
+- {
+-            const unsigned thisbit = bits & msb;
+-            csr ^= SROMCLKOFF; EMIT;    /* clock low; data not valid */
+-            if (thisbit != lastbit) {
+-                csr ^= SROMDOUT; EMIT;  /* clock low; invert data */
+-            } else {
+-                EMIT;
+-            }
+-            csr ^= SROMCLKON; EMIT;     /* clock high; data valid */
+-            lastbit = thisbit;
+-        }
+-        csr ^= SROMCLKOFF; EMIT;
+-
+-        for (data = 0, bits = 0; bits < 16; bits++) {
+-            data <<= 1;
+-            csr ^= SROMCLKON; EMIT;     /* clock high; data valid */
+-            data |= TULIP_CSR_READ(csr_srom_mii) & SROMDIN ? 1 : 0;
+-            csr ^= SROMCLKOFF; EMIT;    /* clock low; data not valid */
+-        }
+-        srom[idx*2] = data & 0xFF;
+-        srom[idx*2+1] = data >> 8;
+-        csr  = SROMSEL | SROMRD; EMIT;
+-        csr  = 0; EMIT;
+-    }
+-    srom_idle();
+-}
+-
+-/**************************************************************************
+-ETH_RESET - Reset adapter
+-***************************************************************************/
+-static void tulip_reset(struct nic *nic)
+-{
+-        int x,cnt=2;
+-
+-        outl(0x00000001, ioaddr + CSR0);
+-        udelay(1000);
+-        /* turn off reset and set cache align=16lword, burst=unlimit */
+-        outl(0x01A08000, ioaddr + CSR0);
+-
+-	/* for some reason the media selection does not take
+-           the first time se it is repeated.  */
+-
+-        while(cnt--) {
+-        /* stop TX,RX processes */
+-        if (cnt == 1)
+-		outl(0x32404000, ioaddr + CSR6);
+-        else
+-		outl(0x32000040, ioaddr + CSR6);
+-
+-        /* XXX - media selection is vendor specific and hard coded right
+-           here.  This should be fixed to use the hints in the SROM and
+-           allow media selection by the user at runtime.  MII support
+-           should also be added.  Support for chips other than the
+-           21143 should be added here as well  */
+-
+-        /* start  set to 10Mbps half-duplex */
+-
+-        /* setup SIA */
+-        outl(0x0, ioaddr + CSR13);              /* reset SIA */
+-        outl(0x7f3f, ioaddr + CSR14);
+-        outl(0x8000008, ioaddr + CSR15);
+-        outl(0x0, ioaddr + CSR13);
+-        outl(0x1, ioaddr + CSR13);
+-        outl(0x2404000, ioaddr + CSR6);
+-
+-        /* initalize GP */
+-        outl(0x8af0008, ioaddr + CSR15);
+-        outl(0x50008, ioaddr + CSR15);
+-
+-        /* end  set to 10Mbps half-duplex */
+-
+-	if (vendor == PCI_VENDOR_ID_MACRONIX && dev_id == PCI_DEVICE_ID_MX987x5) {
+-		/* do stuff for MX98715 */
+-		outl(0x01a80000, ioaddr + CSR6);
+-		outl(0xFFFFFFFF, ioaddr + CSR14);
+-		outl(0x00001000, ioaddr + CSR12);
+-	}
+-
+-        outl(0x0, ioaddr + CSR7);       /* disable interrupts */
+-
+-        /* construct setup packet which is used by the 21143 to
+-           program its CAM to recognize interesting MAC addresses */
+-
+-        memset(&txd, 0, sizeof(struct txdesc));
+-        txd.buf1addr = &txb[0];
+-        txd.buf2addr = &txb[0];         /* just in case */
+-        txd.buf1sz   = 192;             /* setup packet must be 192 bytes */
+-        txd.buf2sz   = 0;
+-        txd.control  = 0x020;           /* setup packet */
+-        txd.status   = 0x80000000;      /* give ownership to 21143 */
+-
+-        /* construct perfect filter frame */
+-        /* with mac address as first match */
+-        /* and broadcast address for all others */
+-
+-        for(x=0;x<192;x++) txb[x] = 0xff;
+-        txb[0] = nic->node_addr[0];
+-        txb[1] = nic->node_addr[1];
+-        txb[4] = nic->node_addr[2];
+-        txb[5] = nic->node_addr[3];
+-        txb[8] = nic->node_addr[4];
+-        txb[9] = nic->node_addr[5];
+-        outl((unsigned long)&txd, ioaddr + CSR4);        /* set xmit buf */
+-        outl(0x2406000, ioaddr + CSR6);         /* start transmiter */
+-
+-        udelay(50000);  /* wait for the setup packet to be processed */
+-
+-        }
+-
+-        /* setup receive descriptor */
+-        {
+-          int x;
+-          for(x=0;x<NRXD;x++) {
+-            memset(&rxd[x], 0, sizeof(struct rxdesc));
+-            rxd[x].buf1addr = &rxb[x * BUFLEN];
+-            rxd[x].buf2addr = 0;        /* not used */
+-            rxd[x].buf1sz   = BUFLEN;
+-            rxd[x].buf2sz   = 0;        /* not used */
+-            rxd[x].control  = 0x0;
+-            rxd[x].status   = 0x80000000;       /* give ownership it to 21143 */
+-          }
+-          rxd[NRXD - 1].control  = 0x008;       /* Set Receive end of ring on la
+-st descriptor */
+-          rxd_tail = 0;
+-        }
+-
+-        /* tell DC211XX where to find rx descriptor list */
+-        outl((unsigned long)&rxd[0], ioaddr + CSR3);
+-        /* start the receiver */
+-        outl(0x2406002, ioaddr + CSR6);
+-
+-}
+-
+-/**************************************************************************
+-ETH_TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static const char padmap[] = {
+-        0, 3, 2, 1};
+-
+-static void tulip_transmit(struct nic *nic, const char *d, unsigned int t, unsigned int s, const char *p)
+-{
+-        unsigned long time;
+-
+-        /* setup ethernet header */
+-
+-	memcpy(ehdr, d, ETH_ALEN);
+-	memcpy(&ehdr[ETH_ALEN], nic->node_addr, ETH_ALEN);
+-        ehdr[ETH_ALEN*2] = (t >> 8) & 0xff;
+-        ehdr[ETH_ALEN*2+1] = t & 0xff;
+-
+-        /* setup the transmit descriptor */
+-
+-        memset(&txd, 0, sizeof(struct txdesc));
+-
+-        txd.buf1addr = &ehdr[0];        /* ethernet header */
+-        txd.buf1sz   = ETH_HLEN;
+-
+-        txd.buf2addr = p;               /* packet to transmit */
+-        txd.buf2sz   = s;
+-
+-        txd.control  = 0x188;           /* LS+FS+TER */
+-
+-        txd.status   = 0x80000000;      /* give it to 21143 */
+-
+-        outl(inl(ioaddr + CSR6) & ~0x00004000, ioaddr + CSR6);
+-        outl((unsigned long)&txd, ioaddr + CSR4);
+-        outl(inl(ioaddr + CSR6) | 0x00004000, ioaddr + CSR6);
+-
+-/*   Wait for transmit to complete before returning.  not well tested.
+-
+-        time = currticks();
+-        while(txd.status & 0x80000000) {
+-          if (currticks() - time > 20) {
+-            printf("transmit timeout.\n");
+-            break;
+-          }
+-        }
+-*/
+-
+-}
+-
+-/**************************************************************************
+-ETH_POLL - Wait for a frame
+-***************************************************************************/
+-static int tulip_poll(struct nic *nic)
+-{
+-        if (rxd[rxd_tail].status & 0x80000000) return 0;
+-
+-        nic->packetlen = (rxd[rxd_tail].status & 0x3FFF0000) >> 16;
+-
+-        /* copy packet to working buffer */
+-        /* XXX - this copy could be avoided with a little more work
+-           but for now we are content with it because the optimised
+-           memcpy(, , ) is quite fast */
+-
+-        memcpy(nic->packet, rxb + rxd_tail * BUFLEN, nic->packetlen);
+-
+-        /* return the descriptor and buffer to recieve ring */
+-        rxd[rxd_tail].status = 0x80000000;
+-        rxd_tail++;
+-        if (rxd_tail == NRXD) rxd_tail = 0;
+-
+-        return 1;
+-}
+-
+-static void tulip_disable(struct nic *nic)
+-{
+-	/* nothing for the moment */
+-}
+-
+-/**************************************************************************
+-ETH_PROBE - Look for an adapter
+-***************************************************************************/
+-struct nic *otulip_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci)
+-{
+-        int i;
+-
+-	if (io_addrs == 0 || *io_addrs == 0)
+-		return (0);
+-	vendor = pci->vendor;
+-	dev_id = pci->dev_id;
+-	ioaddr = *io_addrs;
+-	membase = (unsigned int *)pci->membase;
+-
+-        /* wakeup chip */
+-        pcibios_write_config_dword(pci->bus,pci->devfn,0x40,0x00000000);
+-
+-        /* Stop the chip's Tx and Rx processes. */
+-        /* outl(inl(ioaddr + CSR6) & ~0x2002, ioaddr + CSR6); */
+-        /* Clear the missed-packet counter. */
+-        /* (volatile int)inl(ioaddr + CSR8); */
+-
+-        srom_read();
+-
+-	for (i=0; i < ETH_ALEN; i++)
+-		nic->node_addr[i] = srom[20+i];
+-
+-        printf("Tulip %! at ioaddr %#hX\n", nic->node_addr, ioaddr);
+-
+-        tulip_reset(nic);
+-
+-	nic->reset = tulip_reset;
+-	nic->poll = tulip_poll;
+-	nic->transmit = tulip_transmit;
+-	nic->disable = tulip_disable;
+-        return nic;
+-}
+diff -Naur grub-0.97.orig/netboot/otulip.h grub-0.97/netboot/otulip.h
+--- grub-0.97.orig/netboot/otulip.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/otulip.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,76 +0,0 @@
+-/* mostly stolen from FreeBSD if_de.c, if_devar.h */
+-
+-#define TULIP_CSR_READ(csr)		(membase[csr*2])
+-#define CSR_READ(csr)			(membase[csr*2])
+-#define TULIP_CSR_WRITE(csr, val)	(membase[csr*2] = val)
+-#define CSR_WRITE(csr, val)		(membase[csr*2] = val)
+-
+-#define csr_0			0
+-#define csr_1			1
+-#define csr_2			2
+-#define csr_3			3
+-#define csr_4			4
+-#define csr_5			5
+-#define csr_6			6
+-#define csr_7			7
+-#define csr_8			8
+-#define csr_9			9
+-#define csr_10			10
+-#define csr_11			11
+-#define csr_12			12
+-#define csr_13			13
+-#define csr_14			14
+-#define csr_15			15
+-
+-#define csr_busmode		csr_0
+-#define csr_txpoll		csr_1
+-#define csr_rxpoll		csr_2
+-#define csr_rxlist		csr_3
+-#define csr_txlist		csr_4
+-#define csr_status		csr_5
+-#define csr_command		csr_6
+-#define csr_intr		csr_7
+-#define csr_missed_frames	csr_8
+-#define csr_enetrom		csr_9		/* 21040 */
+-#define csr_reserved		csr_10		/* 21040 */
+-#define csr_full_duplex		csr_11		/* 21040 */
+-#define csr_bootrom		csr_10		/* 21041/21140A/?? */
+-#define csr_gp			csr_12		/* 21140* */
+-#define csr_watchdog		csr_15		/* 21140* */
+-#define csr_gp_timer		csr_11		/* 21041/21140* */
+-#define csr_srom_mii		csr_9		/* 21041/21140* */
+-#define csr_sia_status		csr_12		/* 2104x */
+-#define csr_sia_connectivity	csr_13		/* 2104x */
+-#define csr_sia_tx_rx		csr_14		/* 2104x */
+-#define csr_sia_general		csr_15		/* 2104x */
+-
+-#define SROMSEL		0x0800
+-#define SROMCS		0x0001
+-#define SROMCLKON	0x0002
+-#define SROMCLKOFF	0x0002
+-#define SROMRD		0x4000
+-#define SROMWR		0x2000
+-#define SROM_BITWIDTH	6
+-#define SROMCMD_RD	6
+-#define SROMCSON	0x0001
+-#define SROMDOUT	0x0004
+-#define SROMDIN		0x0008
+-
+-
+-struct txdesc {
+-	unsigned long	status;		/* owner, status */
+-	unsigned long	buf1sz:11,	/* size of buffer 1 */
+-			buf2sz:11,	/* size of buffer 2 */
+-			control:10;	/* control bits */
+-	const unsigned char *buf1addr;	/* buffer 1 address */
+-	const unsigned char *buf2addr;	/* buffer 2 address */
+-};
+-
+-struct rxdesc {
+-	unsigned long	status;		/* owner, status */
+-	unsigned long	buf1sz:11,	/* size of buffer 1 */
+-			buf2sz:11,	/* size of buffer 2 */
+-			control:10;	/* control bits */
+-	unsigned char	*buf1addr;	/* buffer 1 address */
+-	unsigned char	*buf2addr;	/* buffer 2 address */
+-};
+diff -Naur grub-0.97.orig/netboot/pci.c grub-0.97/netboot/pci.c
+--- grub-0.97.orig/netboot/pci.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/pci.c	2005-08-31 19:03:35.000000000 +0000
+@@ -1,15 +1,3 @@
+-/*
+-** Support for NE2000 PCI clones added David Monro June 1997
+-** Generalised to other NICs by Ken Yap July 1997
+-**
+-** Most of this is taken from:
+-**
+-** /usr/src/linux/drivers/pci/pci.c
+-** /usr/src/linux/include/linux/pci.h
+-** /usr/src/linux/arch/i386/bios32.c
+-** /usr/src/linux/include/linux/bios32.h
+-** /usr/src/linux/drivers/net/ne.c
+-*/
+ 
+ /*
+  * This program is free software; you can redistribute it and/or
+@@ -18,402 +6,294 @@
+  * your option) any later version.
+  */
+ 
+-#include "etherboot.h"
++#include "grub.h"
+ #include "pci.h"
+ 
+-/*#define	DEBUG	1*/
+-#define DEBUG	0
+-
+-#ifdef	CONFIG_PCI_DIRECT
+-#define  PCIBIOS_SUCCESSFUL                0x00
+-
+-/*
+- * Functions for accessing PCI configuration space with type 1 accesses
+- */
+-
+-#define CONFIG_CMD(bus, device_fn, where)   (0x80000000 | (bus << 16) | (device_fn << 8) | (where & ~3))
+-
+-int pcibios_read_config_byte(unsigned int bus, unsigned int device_fn,
+-			       unsigned int where, unsigned char *value)
++unsigned long virt_offset = 0;
++unsigned long virt_to_phys(volatile const void *virt_addr)
+ {
+-    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
+-    *value = inb(0xCFC + (where&3));
+-    return PCIBIOS_SUCCESSFUL;
++	return ((unsigned long)virt_addr) + virt_offset;
+ }
+ 
+-int pcibios_read_config_word (unsigned int bus,
+-    unsigned int device_fn, unsigned int where, unsigned short *value)
++void *phys_to_virt(unsigned long phys_addr)
+ {
+-    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
+-    *value = inw(0xCFC + (where&2));
+-    return PCIBIOS_SUCCESSFUL;
++	return (void *)(phys_addr - virt_offset);
+ }
+ 
+-int pcibios_read_config_dword (unsigned int bus, unsigned int device_fn,
+-				 unsigned int where, unsigned int *value)
+-{
+-    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
+-    *value = inl(0xCFC);
+-    return PCIBIOS_SUCCESSFUL;
+-}
++#ifdef INCLUDE_3C595
++extern struct pci_driver t595_driver;
++#endif /* INCLUDE_3C595 */
+ 
+-int pcibios_write_config_byte (unsigned int bus, unsigned int device_fn,
+-				 unsigned int where, unsigned char value)
+-{
+-    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
+-    outb(value, 0xCFC + (where&3));
+-    return PCIBIOS_SUCCESSFUL;
+-}
++#ifdef INCLUDE_3C90X
++extern struct pci_driver a3c90x_driver;
++#endif /* INCLUDE_3C90X */
+ 
+-int pcibios_write_config_word (unsigned int bus, unsigned int device_fn,
+-				 unsigned int where, unsigned short value)
+-{
+-    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
+-    outw(value, 0xCFC + (where&2));
+-    return PCIBIOS_SUCCESSFUL;
+-}
++#ifdef INCLUDE_DAVICOM
++extern struct pci_driver davicom_driver;
++#endif /* INCLUDE_DAVICOM */
+ 
+-int pcibios_write_config_dword (unsigned int bus, unsigned int device_fn, unsigned int where, unsigned int value)
+-{
+-    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
+-    outl(value, 0xCFC);
+-    return PCIBIOS_SUCCESSFUL;
+-}
++#ifdef INCLUDE_E1000
++extern struct pci_driver e1000_driver;
++#endif /* INCLUDE_E1000 */
+ 
+-#undef CONFIG_CMD
++#ifdef INCLUDE_EEPRO100
++extern struct pci_driver eepro100_driver;
++#endif /* INCLUDE_EEPRO100 */
+ 
+-#else	 /* CONFIG_PCI_DIRECT  not defined */
++#ifdef INCLUDE_EPIC100
++extern struct pci_driver epic100_driver;
++#endif /* INCLUDE_EPIC100 */
+ 
+-static struct {
+-	unsigned long address;
+-	unsigned short segment;
+-} bios32_indirect = { 0, KERN_CODE_SEG };
+-
+-static long pcibios_entry;
+-static struct {
+-	unsigned long address;
+-	unsigned short segment;
+-} pci_indirect = { 0, KERN_CODE_SEG };
++#ifdef INCLUDE_FORCEDETH
++extern struct pci_driver forcedeth_driver;
++#endif /* INCLUDE_FORCEDETH */
+ 
+-static unsigned long bios32_service(unsigned long service)
+-{
+-	unsigned char return_code;	/* %al */
+-	unsigned long address;		/* %ebx */
+-	unsigned long length;		/* %ecx */
+-	unsigned long entry;		/* %edx */
+-	unsigned long flags;
+-
+-	save_flags(flags);
+-	__asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%edi)"
+-#else
+-		"lcall *(%%edi)"
+-#endif
+-		: "=a" (return_code),
+-		  "=b" (address),
+-		  "=c" (length),
+-		  "=d" (entry)
+-		: "0" (service),
+-		  "1" (0),
+-		  "D" (&bios32_indirect));
+-	restore_flags(flags);
+-
+-	switch (return_code) {
+-		case 0:
+-			return address + entry;
+-		case 0x80:	/* Not present */
+-			printf("bios32_service(%d) : not present\n", service);
+-			return 0;
+-		default: /* Shouldn't happen */
+-			printf("bios32_service(%d) : returned %#X, mail drew@colorado.edu\n",
+-				service, return_code);
+-			return 0;
+-	}
+-}
++#ifdef INCLUDE_NATSEMI
++extern struct pci_driver natsemi_driver;
++#endif /* INCLUDE_NATSEMI */
+ 
+-int pcibios_read_config_byte(unsigned int bus,
+-        unsigned int device_fn, unsigned int where, unsigned char *value)
+-{
+-        unsigned long ret;
+-        unsigned long bx = (bus << 8) | device_fn;
+-        unsigned long flags;
+-
+-        save_flags(flags);
+-        __asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%esi)\n\t"
+-#else
+-		"lcall *(%%esi)\n\t"
+-#endif
+-                "jc 1f\n\t"
+-                "xor %%ah, %%ah\n"
+-                "1:"
+-                : "=c" (*value),
+-                  "=a" (ret)
+-                : "1" (PCIBIOS_READ_CONFIG_BYTE),
+-                  "b" (bx),
+-                  "D" ((long) where),
+-                  "S" (&pci_indirect));
+-        restore_flags(flags);
+-        return (int) (ret & 0xff00) >> 8;
+-}
++#ifdef INCLUDE_NS83820
++extern struct pci_driver ns83820_driver;
++#endif /* INCLUDE_NS83820 */
+ 
+-int pcibios_read_config_word(unsigned int bus,
+-        unsigned int device_fn, unsigned int where, unsigned short *value)
+-{
+-        unsigned long ret;
+-        unsigned long bx = (bus << 8) | device_fn;
+-        unsigned long flags;
+-
+-        save_flags(flags);
+-        __asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%esi)\n\t"
+-#else
+-		"lcall *(%%esi)\n\t"
+-#endif
+-                "jc 1f\n\t"
+-                "xor %%ah, %%ah\n"
+-                "1:"
+-                : "=c" (*value),
+-                  "=a" (ret)
+-                : "1" (PCIBIOS_READ_CONFIG_WORD),
+-                  "b" (bx),
+-                  "D" ((long) where),
+-                  "S" (&pci_indirect));
+-        restore_flags(flags);
+-        return (int) (ret & 0xff00) >> 8;
+-}
++#ifdef INCLUDE_NS8390
++extern struct pci_driver nepci_driver;
++#endif /* INCLUDE_NS8390 */
+ 
+-int pcibios_read_config_dword(unsigned int bus,
+-        unsigned int device_fn, unsigned int where, unsigned int *value)
+-{
+-        unsigned long ret;
+-        unsigned long bx = (bus << 8) | device_fn;
+-        unsigned long flags;
+-
+-        save_flags(flags);
+-        __asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%esi)\n\t"
+-#else
+-		"lcall *(%%esi)\n\t"
+-#endif
+-                "jc 1f\n\t"
+-                "xor %%ah, %%ah\n"
+-                "1:"
+-                : "=c" (*value),
+-                  "=a" (ret)
+-                : "1" (PCIBIOS_READ_CONFIG_DWORD),
+-                  "b" (bx),
+-                  "D" ((long) where),
+-                  "S" (&pci_indirect));
+-        restore_flags(flags);
+-        return (int) (ret & 0xff00) >> 8;
+-}
++#ifdef INCLUDE_PCNET32
++extern struct pci_driver pcnet32_driver;
++#endif /* INCLUDE_PCNET32 */
+ 
+-int pcibios_write_config_byte (unsigned int bus,
+-	unsigned int device_fn, unsigned int where, unsigned char value)
+-{
+-	unsigned long ret;
+-	unsigned long bx = (bus << 8) | device_fn;
+-	unsigned long flags;
+-
+-	save_flags(flags); cli();
+-	__asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%esi)\n\t"
+-#else
+-		"lcall *(%%esi)\n\t"
+-#endif
+-		"jc 1f\n\t"
+-		"xor %%ah, %%ah\n"
+-		"1:"
+-		: "=a" (ret)
+-		: "0" (PCIBIOS_WRITE_CONFIG_BYTE),
+-		  "c" (value),
+-		  "b" (bx),
+-		  "D" ((long) where),
+-		  "S" (&pci_indirect));
+-	restore_flags(flags);
+-	return (int) (ret & 0xff00) >> 8;
+-}
++#ifdef INCLUDE_PNIC
++extern struct pci_driver pnic_driver;
++#endif /* INCLUDE_PNIC */
+ 
+-int pcibios_write_config_word (unsigned int bus,
+-	unsigned int device_fn, unsigned int where, unsigned short value)
+-{
+-	unsigned long ret;
+-	unsigned long bx = (bus << 8) | device_fn;
+-	unsigned long flags;
+-
+-	save_flags(flags); cli();
+-	__asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%esi)\n\t"
+-#else
+-		"lcall *(%%esi)\n\t"
+-#endif
+-		"jc 1f\n\t"
+-		"xor %%ah, %%ah\n"
+-		"1:"
+-		: "=a" (ret)
+-		: "0" (PCIBIOS_WRITE_CONFIG_WORD),
+-		  "c" (value),
+-		  "b" (bx),
+-		  "D" ((long) where),
+-		  "S" (&pci_indirect));
+-	restore_flags(flags);
+-	return (int) (ret & 0xff00) >> 8;
+-}
++#ifdef INCLUDE_RTL8139
++extern struct pci_driver rtl8139_driver;
++#endif /* INCLUDE_RTL8139 */
+ 
+-int pcibios_write_config_dword (unsigned int bus,
+-	unsigned int device_fn, unsigned int where, unsigned int value)
+-{
+-	unsigned long ret;
+-	unsigned long bx = (bus << 8) | device_fn;
+-	unsigned long flags;
+-
+-	save_flags(flags); cli();
+-	__asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-		"lcall (%%esi)\n\t"
+-#else
+-		"lcall *(%%esi)\n\t"
+-#endif
+-		"jc 1f\n\t"
+-		"xor %%ah, %%ah\n"
+-		"1:"
+-		: "=a" (ret)
+-		: "0" (PCIBIOS_WRITE_CONFIG_DWORD),
+-		  "c" (value),
+-		  "b" (bx),
+-		  "D" ((long) where),
+-		  "S" (&pci_indirect));
+-	restore_flags(flags);
+-	return (int) (ret & 0xff00) >> 8;
+-}
++#ifdef INCLUDE_SIS900
++extern struct pci_driver sis900_driver;
++extern struct pci_driver sis_bridge_driver;
++#endif /* INCLUDE_SIS900 */
+ 
+-static void check_pcibios(void)
+-{
+-	unsigned long signature;
+-	unsigned char present_status;
+-	unsigned char major_revision;
+-	unsigned char minor_revision;
+-	unsigned long flags;
+-	int pack;
+-
+-	if ((pcibios_entry = bios32_service(PCI_SERVICE))) {
+-		pci_indirect.address = pcibios_entry;
+-
+-		save_flags(flags);
+-		__asm__(
+-#ifdef ABSOLUTE_WITHOUT_ASTERISK
+-			"lcall (%%edi)\n\t"
+-#else
+-			"lcall *(%%edi)\n\t"
+-#endif
+-			"jc 1f\n\t"
+-			"xor %%ah, %%ah\n"
+-			"1:\tshl $8, %%eax\n\t"
+-			"movw %%bx, %%ax"
+-			: "=d" (signature),
+-			  "=a" (pack)
+-			: "1" (PCIBIOS_PCI_BIOS_PRESENT),
+-			  "D" (&pci_indirect)
+-			: "bx", "cx");
+-		restore_flags(flags);
+-
+-		present_status = (pack >> 16) & 0xff;
+-		major_revision = (pack >> 8) & 0xff;
+-		minor_revision = pack & 0xff;
+-		if (present_status || (signature != PCI_SIGNATURE)) {
+-			printf("ERROR: BIOS32 says PCI BIOS, but no PCI "
+-				"BIOS????\n");
+-			pcibios_entry = 0;
+-		}
+-#if	DEBUG
+-		if (pcibios_entry) {
+-			printf ("pcibios_init : PCI BIOS revision %hhX.%hhX"
+-				" entry at %#X\n", major_revision,
+-				minor_revision, pcibios_entry);
+-		}
+-#endif
+-	}
+-}
++#ifdef INCLUDE_SUNDANCE
++extern struct pci_driver sundance_driver;
++#endif	/* INCLUDE_SUNDANCE */
+ 
+-static void pcibios_init(void)
+-{
+-	union bios32 *check;
+-	unsigned char sum;
+-	int i, length;
+-	unsigned long bios32_entry = 0;
+-
+-	/*
+-	 * Follow the standard procedure for locating the BIOS32 Service
+-	 * directory by scanning the permissible address range from
+-	 * 0xe0000 through 0xfffff for a valid BIOS32 structure.
+-	 *
+-	 */
++#ifdef INCLUDE_TG3
++extern struct pci_driver  tg3_driver;
++#endif /* INCLUDE_TG3 */
++
++#ifdef INCLUDE_TLAN
++extern struct pci_driver tlan_driver;
++#endif /* INCLUDE_TLAN */
++
++#ifdef INCLUDE_TULIP
++extern struct pci_driver tulip_driver;
++#endif /* INCLUDE_TULIP */
++
++#ifdef INCLUDE_UNDI
++extern struct pci_driver undi_driver;
++#endif /* INCLUDE_UNDI */
++
++#ifdef INCLUDE_VIA_RHINE
++extern struct pci_driver rhine_driver;
++#endif/* INCLUDE_VIA_RHINE */
++
++#ifdef INCLUDE_W89C840
++extern struct pci_driver w89c840_driver;
++#endif /* INCLUDE_W89C840 */
++
++#ifdef INCLUDE_R8169
++extern struct pci_driver r8169_driver;
++#endif /* INCLUDE_R8169 */
++
++static const struct pci_driver *pci_drivers[] = {
++
++#ifdef INCLUDE_3C595
++	&t595_driver,
++#endif /* INCLUDE_3C595 */
++
++#ifdef INCLUDE_3C90X
++	&a3c90x_driver,
++#endif /* INCLUDE_3C90X */
++
++#ifdef INCLUDE_DAVICOM
++	&davicom_driver,
++#endif /* INCLUDE_DAVICOM */
++
++#ifdef INCLUDE_E1000
++	&e1000_driver,
++#endif /* INCLUDE_E1000 */
++
++#ifdef INCLUDE_EEPRO100
++	&eepro100_driver,
++#endif /* INCLUDE_EEPRO100 */
++
++#ifdef INCLUDE_EPIC100
++	&epic100_driver,
++#endif /* INCLUDE_EPIC100 */
++
++#ifdef INCLUDE_FORCEDETH
++	&forcedeth_driver,
++#endif /* INCLUDE_FORCEDETH */
++
++#ifdef INCLUDE_NATSEMI
++	&natsemi_driver,
++#endif /* INCLUDE_NATSEMI */
++
++#ifdef INCLUDE_NS83820
++	&ns83820_driver,
++#endif /* INCLUDE_NS83820 */
++
++#ifdef INCLUDE_NS8390
++	&nepci_driver,
++#endif /* INCLUDE_NS8390 */
++
++#ifdef INCLUDE_PCNET32
++	&pcnet32_driver,
++#endif /* INCLUDE_PCNET32 */
++
++#ifdef INCLUDE_PNIC
++	&pnic_driver,
++#endif /* INCLUDE_PNIC */
+ 
+-	for (check = (union bios32 *) 0xe0000; check <= (union bios32 *) 0xffff0; ++check) {
+-		if (check->fields.signature != BIOS32_SIGNATURE)
++#ifdef INCLUDE_RTL8139
++	&rtl8139_driver,
++#endif /* INCLUDE_RTL8139 */
++
++#ifdef INCLUDE_SIS900
++	&sis900_driver,
++	&sis_bridge_driver,
++#endif /* INCLUDE_SIS900 */
++
++#ifdef INCLUDE_SUNDANCE
++	&sundance_driver,
++#endif /* INCLUDE_SUNDANCE */
++
++#ifdef INCLUDE_TG3
++	& tg3_driver,
++#endif /* INCLUDE_TG3 */
++
++#ifdef INCLUDE_TLAN
++	&tlan_driver,
++#endif /* INCLUDE_TLAN */
++
++#ifdef INCLUDE_TULIP
++	& tulip_driver,
++#endif /* INCLUDE_TULIP */
++
++#ifdef INCLUDE_VIA_RHINE
++	&rhine_driver,
++#endif/* INCLUDE_VIA_RHINE */
++
++#ifdef INCLUDE_W89C840
++	&w89c840_driver,
++#endif /* INCLUDE_W89C840 */
++
++#ifdef INCLUDE_R8169
++	&r8169_driver,
++#endif /* INCLUDE_R8169 */
++
++/* We must be the last one */
++#ifdef INCLUDE_UNDI
++	&undi_driver,
++#endif /* INCLUDE_UNDI */
++
++	0
++};
++
++static void scan_drivers(
++	int type, 
++	uint32_t class, uint16_t vendor, uint16_t device,
++	const struct pci_driver *last_driver, struct pci_device *dev)
++{
++	const struct pci_driver *skip_driver = last_driver;
++	/* Assume there is only one match of the correct type */
++	const struct pci_driver *driver;
++	int i, j;
++	
++	for(j = 0; pci_drivers[j] != 0; j++){
++		driver = pci_drivers[j];
++		if (driver->type != type)
+ 			continue;
+-		length = check->fields.length * 16;
+-		if (!length)
++		if (skip_driver) {
++			if (skip_driver == driver) 
++				skip_driver = 0;
+ 			continue;
+-		sum = 0;
+-		for (i = 0; i < length ; ++i)
+-			sum += check->chars[i];
+-		if (sum != 0)
++		}
++		for(i = 0; i < driver->id_count; i++) {
++			if ((vendor == driver->ids[i].vendor) &&
++			    (device == driver->ids[i].dev_id)) {
++				
++				dev->driver = driver;
++				dev->name   = driver->ids[i].name;
++
++				goto out;
++			}
++		}
++	}
++	if (!class) {
++		goto out;
++	}
++	for(j = 0; pci_drivers[j] != 0; j++){
++		driver = pci_drivers[j];
++		if (driver->type != type)
+ 			continue;
+-		if (check->fields.revision != 0) {
+-			printf("pcibios_init : unsupported revision %d at %#X, mail drew@colorado.edu\n",
+-				check->fields.revision, check);
++		if (skip_driver) {
++			if (skip_driver == driver)
++				skip_driver = 0;
+ 			continue;
+ 		}
+-#if	DEBUG
+-		printf("pcibios_init : BIOS32 Service Directory "
+-			"structure at %#X\n", check);
+-#endif
+-		if (!bios32_entry) {
+-			if (check->fields.entry >= 0x100000) {
+-				printf("pcibios_init: entry in high "
+-					"memory, giving up\n");
+-				return;
+-			} else {
+-				bios32_entry = check->fields.entry;
+-#if	DEBUG
+-				printf("pcibios_init : BIOS32 Service Directory"
+-					" entry at %#X\n", bios32_entry);
+-#endif
+-				bios32_indirect.address = bios32_entry;
+-			}
++		if (last_driver == driver)
++			continue;
++		if ((class >> 8) == driver->class) {
++			dev->driver = driver;
++			dev->name   = driver->name;
++			goto out;
+ 		}
+ 	}
+-	if (bios32_entry)
+-		check_pcibios();
++ out:
++	return;
+ }
+-#endif	/* CONFIG_PCI_DIRECT not defined*/
+ 
+-static void scan_bus(struct pci_device *pcidev)
++void scan_pci_bus(int type, struct pci_device *dev)
+ {
+-	unsigned int devfn, l, bus, buses;
++	unsigned int first_bus, first_devfn;
++	const struct pci_driver *first_driver;
++	unsigned int devfn, bus, buses;
+ 	unsigned char hdr_type = 0;
+-	unsigned short vendor, device;
+-	unsigned int membase, ioaddr, romaddr;
+-	int i, reg;
+-	unsigned int pci_ioaddr = 0;
+-
++	uint32_t class;
++	uint16_t vendor, device;
++	uint32_t l, membase, ioaddr, romaddr;
++	int reg;
++
++	EnterFunction("scan_pci_bus");
++	first_bus    = 0;
++	first_devfn  = 0;
++	first_driver = 0;
++	if (dev->driver) {
++		first_driver = dev->driver;
++		first_bus    = dev->bus;
++		first_devfn  = dev->devfn;
++		/* Re read the header type on a restart */
++		pcibios_read_config_byte(first_bus, first_devfn & ~0x7, 
++			PCI_HEADER_TYPE, &hdr_type);
++		dev->driver  = 0;
++		dev->bus     = 0;
++		dev->devfn   = 0;
++	}
++		
+ 	/* Scan all PCI buses, until we find our card.
+-	 * We could be smart only scan the required busses but that
++	 * We could be smart only scan the required buses but that
+ 	 * is error prone, and tricky.
+-	 * By scanning all possible pci busses in order we should find
++	 * By scanning all possible pci buses in order we should find
+ 	 * our card eventually. 
+ 	 */
+ 	buses=256;
+-	for (bus = 0; bus < buses; ++bus) {
+-		for (devfn = 0; devfn < 0xff; ++devfn) {
++	for (bus = first_bus; bus < buses; ++bus) {
++		for (devfn = first_devfn; devfn < 0xff; ++devfn, first_driver = 0) {
+ 			if (PCI_FUNC (devfn) == 0)
+ 				pcibios_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+ 			else if (!(hdr_type & 0x80))	/* not a multi-function device */
+@@ -421,61 +301,90 @@
+ 			pcibios_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l);
+ 			/* some broken boards return 0 if a slot is empty: */
+ 			if (l == 0xffffffff || l == 0x00000000) {
+-				hdr_type = 0;
+ 				continue;
+ 			}
+ 			vendor = l & 0xffff;
+ 			device = (l >> 16) & 0xffff;
+ 
++			pcibios_read_config_dword(bus, devfn, PCI_REVISION, &l);
++			class = (l >> 8) & 0xffffff;
+ #if	DEBUG
+-			printf("bus %hhX, function %hhX, vendor %hX, device %hX\n",
+-				bus, devfn, vendor, device);
++		{
++			int i;
++			printf("%hhx:%hhx.%hhx [%hX/%hX] ---- ",
++				bus, PCI_SLOT(devfn), PCI_FUNC(devfn),
++				vendor, device);
++#if	DEBUG > 1
++			for(i = 0; i < 256; i++) {
++				unsigned char byte;
++				if ((i & 0xf) == 0) {
++					printf("%hhx: ", i);
++				}
++				pcibios_read_config_byte(bus, devfn, i, &byte);
++				printf("%hhx ", byte);
++				if ((i & 0xf) == 0xf) {
++					printf("\n");
++				}
++			}
++#endif
++
++		}
++#endif
++			scan_drivers(type, class, vendor, device, first_driver, dev);
++			if (!dev->driver){
++#if DEBUG
++				printf("No driver fit.\n");
+ #endif
+-			for (i = 0; pcidev[i].vendor != 0; i++) {
+-				if (vendor != pcidev[i].vendor
+-				    || device != pcidev[i].dev_id)
++				continue;
++			}
++#if DEBUG
++			printf("Get Driver:\n");
++#endif
++			dev->devfn = devfn;
++			dev->bus = bus;
++			dev->class = class;
++			dev->vendor = vendor;
++			dev->dev_id = device;
++			
++			
++			/* Get the ROM base address */
++			pcibios_read_config_dword(bus, devfn, 
++				PCI_ROM_ADDRESS, &romaddr);
++			romaddr >>= 10;
++			dev->romaddr = romaddr;
++			
++			/* Get the ``membase'' */
++			pcibios_read_config_dword(bus, devfn,
++				PCI_BASE_ADDRESS_1, &membase);
++			dev->membase = membase;
++				
++			/* Get the ``ioaddr'' */
++			for (reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4) {
++				pcibios_read_config_dword(bus, devfn, reg, &ioaddr);
++				if ((ioaddr & PCI_BASE_ADDRESS_IO_MASK) == 0 || (ioaddr & PCI_BASE_ADDRESS_SPACE_IO) == 0)
+ 					continue;
+-				pcidev[i].devfn = devfn;
+-				pcidev[i].bus = bus;
+-				for (reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4) {
+-					pcibios_read_config_dword(bus, devfn, reg, &ioaddr);
+-
+-					if ((ioaddr & PCI_BASE_ADDRESS_IO_MASK) == 0 || (ioaddr & PCI_BASE_ADDRESS_SPACE_IO) == 0)
+-						continue;
+-					/* Strip the I/O address out of the returned value */
+-					ioaddr &= PCI_BASE_ADDRESS_IO_MASK;
+-					/* Get the memory base address */
+-					pcibios_read_config_dword(bus, devfn,
+-						PCI_BASE_ADDRESS_1, &membase);
+-					/* Get the ROM base address */
+-					pcibios_read_config_dword(bus, devfn, PCI_ROM_ADDRESS, &romaddr);
+-					romaddr >>= 10;
+-					printf("Found %s at %#hx, ROM address %#hx\n",
+-						pcidev[i].name, ioaddr, romaddr);
+-					/* Take the first one or the one that matches in boot ROM address */
+-					if (pci_ioaddr == 0 || romaddr == ((unsigned long) rom.rom_segment << 4)) {
+-						pcidev[i].membase = membase;
+-						pcidev[i].ioaddr = ioaddr;
+-						return;
+-					}
+-				}
++				
++				
++				/* Strip the I/O address out of the returned value */
++				ioaddr &= PCI_BASE_ADDRESS_IO_MASK;
++				
++				/* Take the first one or the one that matches in boot ROM address */
++				dev->ioaddr = ioaddr;
+ 			}
++#if DEBUG > 2
++			printf("Found %s ROM address %#hx\n",
++				dev->name, romaddr);
++#endif
++			LeaveFunction("scan_pci_bus");
++			return;
+ 		}
++		first_devfn = 0;
+ 	}
++	first_bus = 0;
++	LeaveFunction("scan_pci_bus");
+ }
+ 
+-void eth_pci_init(struct pci_device *pcidev)
+-{
+-#ifndef	CONFIG_PCI_DIRECT
+-	pcibios_init();
+-	if (!pcibios_entry) {
+-		printf("pci_init: no BIOS32 detected\n");
+-		return;
+-	}
+-#endif
+-	scan_bus(pcidev);
+-	/* return values are in pcidev structures */
+-}
++
+ 
+ /*
+  *	Set device to be a busmaster in case BIOS neglected to do so.
+@@ -489,13 +398,134 @@
+ 	pcibios_read_config_word(p->bus, p->devfn, PCI_COMMAND, &pci_command);
+ 	new_command = pci_command | PCI_COMMAND_MASTER|PCI_COMMAND_IO;
+ 	if (pci_command != new_command) {
+-		printf("The PCI BIOS has not enabled this device!\nUpdating PCI command %hX->%hX. pci_bus %hhX pci_device_fn %hhX\n",
++#if DEBUG > 0
++		printf(
++			"The PCI BIOS has not enabled this device!\n"
++			"Updating PCI command %hX->%hX. pci_bus %hhX pci_device_fn %hhX\n",
+ 			   pci_command, new_command, p->bus, p->devfn);
++#endif
+ 		pcibios_write_config_word(p->bus, p->devfn, PCI_COMMAND, new_command);
+ 	}
+ 	pcibios_read_config_byte(p->bus, p->devfn, PCI_LATENCY_TIMER, &pci_latency);
+ 	if (pci_latency < 32) {
+-		printf("PCI latency timer (CFLT) is unreasonably low at %d. Setting to 32 clocks.\n", pci_latency);
++#if DEBUG > 0
++		printf("PCI latency timer (CFLT) is unreasonably low at %d. Setting to 32 clocks.\n", 
++			pci_latency);
++#endif
+ 		pcibios_write_config_byte(p->bus, p->devfn, PCI_LATENCY_TIMER, 32);
+ 	}
+ }
++
++/*
++ * Find the start of a pci resource.
++ */
++unsigned long pci_bar_start(struct pci_device *dev, unsigned int index)
++{
++	uint32_t lo, hi;
++	unsigned long bar;
++	pci_read_config_dword(dev, index, &lo);
++	if (lo & PCI_BASE_ADDRESS_SPACE_IO) {
++		bar = lo & PCI_BASE_ADDRESS_IO_MASK;
++	} else {
++		bar = 0;
++		if ((lo & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
++			pci_read_config_dword(dev, index + 4, &hi);
++			if (hi) {
++				if (sizeof(unsigned long) > sizeof(uint32_t)) {
++					bar = hi;
++					/* It's REALLY interesting:-) */
++					bar <<=32;
++				}
++				else {
++					printf("Unhandled 64bit BAR\n");
++					return -1UL;
++				}
++			}
++		}
++		bar |= lo & PCI_BASE_ADDRESS_MEM_MASK;
++	}
++	return bar + pcibios_bus_base(dev->bus);
++}
++
++/*
++ * Find the size of a pci resource.
++ */
++unsigned long pci_bar_size(struct pci_device *dev, unsigned int bar)
++{
++	uint32_t start, size;
++	/* Save the original bar */
++	pci_read_config_dword(dev, bar, &start);
++	/* Compute which bits can be set */
++	pci_write_config_dword(dev, bar, ~0);
++	pci_read_config_dword(dev, bar, &size);
++	/* Restore the original size */
++	pci_write_config_dword(dev, bar, start);
++	/* Find the significant bits */
++	if (start & PCI_BASE_ADDRESS_SPACE_IO) {
++		size &= PCI_BASE_ADDRESS_IO_MASK;
++	} else {
++		size &= PCI_BASE_ADDRESS_MEM_MASK;
++	}
++	/* Find the lowest bit set */
++	size = size & ~(size - 1);
++	return size;
++}
++
++/**
++ * pci_find_capability - query for devices' capabilities 
++ * @dev: PCI device to query
++ * @cap: capability code
++ *
++ * Tell if a device supports a given PCI capability.
++ * Returns the address of the requested capability structure within the
++ * device's PCI configuration space or 0 in case the device does not
++ * support it.  Possible values for @cap:
++ *
++ *  %PCI_CAP_ID_PM           Power Management 
++ *
++ *  %PCI_CAP_ID_AGP          Accelerated Graphics Port 
++ *
++ *  %PCI_CAP_ID_VPD          Vital Product Data 
++ *
++ *  %PCI_CAP_ID_SLOTID       Slot Identification 
++ *
++ *  %PCI_CAP_ID_MSI          Message Signalled Interrupts
++ *
++ *  %PCI_CAP_ID_CHSWP        CompactPCI HotSwap 
++ */
++int pci_find_capability(struct pci_device *dev, int cap)
++{
++	uint16_t status;
++	uint8_t pos, id;
++	uint8_t hdr_type;
++	int ttl = 48;
++
++	pci_read_config_word(dev, PCI_STATUS, &status);
++	if (!(status & PCI_STATUS_CAP_LIST))
++		return 0;
++	pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
++	switch (hdr_type & 0x7F) {
++	case PCI_HEADER_TYPE_NORMAL:
++	case PCI_HEADER_TYPE_BRIDGE:
++	default:
++		pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &pos);
++		break;
++	case PCI_HEADER_TYPE_CARDBUS:
++		pci_read_config_byte(dev, PCI_CB_CAPABILITY_LIST, &pos);
++		break;
++	}
++	while (ttl-- && pos >= 0x40) {
++		pos &= ~3;
++		pci_read_config_byte(dev, pos + PCI_CAP_LIST_ID, &id);
++#if	DEBUG > 0
++		printf("Capability: %d\n", id);
++#endif
++		if (id == 0xff)
++			break;
++		if (id == cap)
++			return pos;
++		pci_read_config_byte(dev, pos + PCI_CAP_LIST_NEXT, &pos);
++	}
++	return 0;
++}
++
+diff -Naur grub-0.97.orig/netboot/pci.h grub-0.97/netboot/pci.h
+--- grub-0.97.orig/netboot/pci.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/pci.h	2005-08-31 21:31:46.000000000 +0000
+@@ -1,4 +1,4 @@
+-#ifndef	PCI_H
++#if !defined(PCI_H) && defined(CONFIG_PCI)
+ #define PCI_H
+ 
+ /*
+@@ -21,10 +21,19 @@
+  * your option) any later version.
+  */
+ 
++#include "pci_ids.h"
++
+ #define PCI_COMMAND_IO			0x1	/* Enable response in I/O space */
+ #define PCI_COMMAND_MEM			0x2	/* Enable response in mem space */
+ #define PCI_COMMAND_MASTER		0x4	/* Enable bus mastering */
+ #define PCI_LATENCY_TIMER		0x0d	/* 8 bits */
++#define PCI_COMMAND_SPECIAL		0x8	/* Enable response to special cycles */
++#define PCI_COMMAND_INVALIDATE		0x10	/* Use memory write and invalidate */
++#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
++#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
++#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
++#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
++#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
+ 
+ #define PCIBIOS_PCI_FUNCTION_ID         0xb1XX
+ #define PCIBIOS_PCI_BIOS_PRESENT        0xb101
+@@ -42,10 +51,37 @@
+ #define PCI_DEVICE_ID           0x02    /* 16 bits */
+ #define PCI_COMMAND             0x04    /* 16 bits */
+ 
++#define PCI_STATUS		0x06	/* 16 bits */
++#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
++#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
++#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
++#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
++#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
++#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
++#define  PCI_STATUS_DEVSEL_FAST	0x000	
++#define  PCI_STATUS_DEVSEL_MEDIUM 0x200
++#define  PCI_STATUS_DEVSEL_SLOW 0x400
++#define  PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
++#define  PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
++#define  PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
++#define  PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
++#define  PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
++
+ #define PCI_REVISION            0x08    /* 8 bits  */
++#define PCI_REVISION_ID         0x08    /* 8 bits  */
++#define PCI_CLASS_REVISION      0x08    /* 32 bits  */
+ #define PCI_CLASS_CODE          0x0b    /* 8 bits */
+ #define PCI_SUBCLASS_CODE       0x0a    /* 8 bits */
+ #define PCI_HEADER_TYPE         0x0e    /* 8 bits */
++#define  PCI_HEADER_TYPE_NORMAL	0
++#define  PCI_HEADER_TYPE_BRIDGE 1
++#define  PCI_HEADER_TYPE_CARDBUS 2
++
++
++/* Header type 0 (normal devices) */
++#define PCI_CARDBUS_CIS		0x28
++#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
++#define PCI_SUBSYSTEM_ID	0x2e  
+ 
+ #define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
+ #define PCI_BASE_ADDRESS_1      0x14    /* 32 bits */
+@@ -54,15 +90,155 @@
+ #define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
+ #define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
+ 
++#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
++#define PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
++#define PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
++#define PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
++
+ #ifndef	PCI_BASE_ADDRESS_IO_MASK
+ #define	PCI_BASE_ADDRESS_IO_MASK       (~0x03)
+ #endif
++#ifndef	PCI_BASE_ADDRESS_MEM_MASK
++#define	PCI_BASE_ADDRESS_MEM_MASK       (~0x0f)
++#endif
+ #define	PCI_BASE_ADDRESS_SPACE_IO	0x01
+ #define	PCI_ROM_ADDRESS		0x30	/* 32 bits */
+ #define	PCI_ROM_ADDRESS_ENABLE	0x01	/* Write 1 to enable ROM,
+ 					   bits 31..11 are address,
+ 					   10..2 are reserved */
+ 
++#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
++
++#define PCI_INTERRUPT_LINE	0x3c	/* IRQ number (0-15) */
++#define PCI_INTERRUPT_PIN	0x3d	/* IRQ pin on PCI bus (A-D) */
++
++/* Header type 1 (PCI-to-PCI bridges) */
++#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
++#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
++#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
++#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
++#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
++#define PCI_IO_LIMIT		0x1d
++#define  PCI_IO_RANGE_TYPE_MASK	0x0f	/* I/O bridging type */
++#define  PCI_IO_RANGE_TYPE_16	0x00
++#define  PCI_IO_RANGE_TYPE_32	0x01
++#define  PCI_IO_RANGE_MASK	~0x0f
++#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
++#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
++#define PCI_MEMORY_LIMIT	0x22
++#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0f
++#define  PCI_MEMORY_RANGE_MASK	~0x0f
++#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
++#define PCI_PREF_MEMORY_LIMIT	0x26
++#define  PCI_PREF_RANGE_TYPE_MASK 0x0f
++#define  PCI_PREF_RANGE_TYPE_32	0x00
++#define  PCI_PREF_RANGE_TYPE_64	0x01
++#define  PCI_PREF_RANGE_MASK	~0x0f
++#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
++#define PCI_PREF_LIMIT_UPPER32	0x2c
++#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
++#define PCI_IO_LIMIT_UPPER16	0x32
++/* 0x34 same as for htype 0 */
++/* 0x35-0x3b is reserved */
++#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
++/* 0x3c-0x3d are same as for htype 0 */
++#define PCI_BRIDGE_CONTROL	0x3e
++#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
++#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
++#define  PCI_BRIDGE_CTL_NO_ISA	0x04	/* Disable bridging of ISA ports */
++#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
++#define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */
++#define  PCI_BRIDGE_CTL_BUS_RESET 0x40	/* Secondary bus reset */
++#define  PCI_BRIDGE_CTL_FAST_BACK 0x80	/* Fast Back2Back enabled on secondary interface */
++
++#define PCI_CB_CAPABILITY_LIST	0x14
++
++/* Capability lists */
++
++#define PCI_CAP_LIST_ID		0	/* Capability ID */
++#define  PCI_CAP_ID_PM		0x01	/* Power Management */
++#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
++#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
++#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
++#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
++#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
++#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
++#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
++#define PCI_CAP_SIZEOF		4
++
++/* Power Management Registers */
++
++#define PCI_PM_PMC              2       /* PM Capabilities Register */
++#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
++#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
++#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
++#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
++#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxilliary power support mask */
++#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
++#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
++#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
++#define  PCI_PM_CAP_PME_MASK    0xF800  /* PME Mask of all supported states */
++#define  PCI_PM_CAP_PME_D0      0x0800  /* PME# from D0 */
++#define  PCI_PM_CAP_PME_D1      0x1000  /* PME# from D1 */
++#define  PCI_PM_CAP_PME_D2      0x2000  /* PME# from D2 */
++#define  PCI_PM_CAP_PME_D3      0x4000  /* PME# from D3 (hot) */
++#define  PCI_PM_CAP_PME_D3cold  0x8000  /* PME# from D3 (cold) */
++#define PCI_PM_CTRL		4	/* PM control and status register */
++#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
++#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
++#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
++#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
++#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
++#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
++#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
++#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
++#define PCI_PM_DATA_REGISTER	7	/* (??) */
++#define PCI_PM_SIZEOF		8
++
++/* AGP registers */
++
++#define PCI_AGP_VERSION		2	/* BCD version number */
++#define PCI_AGP_RFU		3	/* Rest of capability flags */
++#define PCI_AGP_STATUS		4	/* Status register */
++#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
++#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
++#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
++#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
++#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
++#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
++#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
++#define PCI_AGP_COMMAND		8	/* Control register */
++#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
++#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
++#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
++#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */
++#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */
++#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
++#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
++#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
++#define PCI_AGP_SIZEOF		12
++
++/* Slot Identification */
++
++#define PCI_SID_ESR		2	/* Expansion Slot Register */
++#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
++#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
++#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
++
++/* Message Signalled Interrupts registers */
++
++#define PCI_MSI_FLAGS		2	/* Various flags */
++#define  PCI_MSI_FLAGS_64BIT	0x80	/* 64-bit addresses allowed */
++#define  PCI_MSI_FLAGS_QSIZE	0x70	/* Message queue size configured */
++#define  PCI_MSI_FLAGS_QMASK	0x0e	/* Maximum queue size available */
++#define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
++#define PCI_MSI_RFU		3	/* Rest of capability flags */
++#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
++#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
++#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
++#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
++
++#define PCI_SLOT(devfn)		  ((devfn) >> 3)
+ #define PCI_FUNC(devfn)           ((devfn) & 0x07)
+ 
+ #define BIOS32_SIGNATURE        (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
+@@ -85,108 +261,97 @@
+ 	char chars[16];
+ };
+ 
+-#define KERN_CODE_SEG	0x8	/* This _MUST_ match start.S */
+-
+-/* Stuff for asm */
+-#define save_flags(x) \
+-__asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */ :"memory")
+-
+-#define cli() __asm__ __volatile__ ("cli": : :"memory")
+-
+-#define restore_flags(x) \
+-__asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory")
+-
+-#define PCI_VENDOR_ID_ADMTEK            0x1317
+-#define PCI_DEVICE_ID_ADMTEK_0985       0x0985
+-#define PCI_VENDOR_ID_REALTEK           0x10ec
+-#define PCI_DEVICE_ID_REALTEK_8029      0x8029
+-#define PCI_DEVICE_ID_REALTEK_8139      0x8139
+-#define PCI_VENDOR_ID_WINBOND2          0x1050
+-#define PCI_DEVICE_ID_WINBOND2_89C940   0x0940
+-#define PCI_DEVICE_ID_WINBOND2_89C840   0x0840
+-#define PCI_VENDOR_ID_COMPEX            0x11f6
+-#define PCI_DEVICE_ID_COMPEX_RL2000     0x1401
+-#define PCI_DEVICE_ID_COMPEX_RL100ATX   0x2011
+-#define PCI_VENDOR_ID_KTI               0x8e2e
+-#define PCI_DEVICE_ID_KTI_ET32P2        0x3000
+-#define PCI_VENDOR_ID_NETVIN            0x4a14
+-#define PCI_DEVICE_ID_NETVIN_NV5000SC   0x5000
+-#define	PCI_VENDOR_ID_HOLTEK		0x12c3
+-#define	PCI_DEVICE_ID_HOLTEK_HT80232	0x0058
+-#define PCI_VENDOR_ID_3COM		0x10b7
+-#define PCI_DEVICE_ID_3COM_3C590	0x5900
+-#define PCI_DEVICE_ID_3COM_3C595	0x5950
+-#define PCI_DEVICE_ID_3COM_3C595_1	0x5951
+-#define PCI_DEVICE_ID_3COM_3C595_2	0x5952
+-#define PCI_DEVICE_ID_3COM_3C900TPO	0x9000
+-#define PCI_DEVICE_ID_3COM_3C900COMBO	0x9001
+-#define PCI_DEVICE_ID_3COM_3C905TX	0x9050
+-#define PCI_DEVICE_ID_3COM_3C905T4	0x9051
+-#define PCI_DEVICE_ID_3COM_3C905B_TX	0x9055
+-#define PCI_DEVICE_ID_3COM_3C905C_TXM	0x9200
+-#define PCI_VENDOR_ID_INTEL		0x8086
+-#define PCI_DEVICE_ID_INTEL_82557	0x1229
+-#define PCI_DEVICE_ID_INTEL_82559ER	0x1209
+-#define PCI_DEVICE_ID_INTEL_ID1029	0x1029
+-#define PCI_DEVICE_ID_INTEL_ID1030	0x1030
+-#define PCI_DEVICE_ID_INTEL_82562	0x2449
+-#define PCI_VENDOR_ID_AMD		0x1022
+-#define PCI_DEVICE_ID_AMD_LANCE		0x2000
+-#define PCI_VENDOR_ID_AMD_HOMEPNA	0x1022
+-#define PCI_DEVICE_ID_AMD_HOMEPNA	0x2001
+-#define PCI_VENDOR_ID_SMC_1211          0x1113
+-#define PCI_DEVICE_ID_SMC_1211          0x1211
+-#define PCI_VENDOR_ID_DEC		0x1011
+-#define PCI_DEVICE_ID_DEC_TULIP		0x0002
+-#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
+-#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
+-#define PCI_DEVICE_ID_DEC_21142		0x0019
+-#define PCI_VENDOR_ID_SMC		0x10B8
+-#ifndef	PCI_DEVICE_ID_SMC_EPIC100
+-# define PCI_DEVICE_ID_SMC_EPIC100	0x0005
+-#endif
+-#define PCI_VENDOR_ID_MACRONIX		0x10d9
+-#define PCI_DEVICE_ID_MX987x5		0x0531
+-#define PCI_VENDOR_ID_LINKSYS		0x11AD
+-#define PCI_DEVICE_ID_LC82C115		0xC115
+-#define PCI_VENDOR_ID_VIATEC		0x1106
+-#define PCI_DEVICE_ID_VIA_RHINE_I	0x3043
+-#define PCI_DEVICE_ID_VIA_VT6102	0x3065
+-#define PCI_DEVICE_ID_VIA_86C100A	0x6100
+-#define PCI_VENDOR_ID_DAVICOM		0x1282
+-#define	PCI_DEVICE_ID_DM9009		0x9009
+-#define PCI_DEVICE_ID_DM9102		0x9102
+-#define PCI_VENDOR_ID_SIS         	0x1039
+-#define PCI_DEVICE_ID_SIS900     	0x0900   
+-#define PCI_DEVICE_ID_SIS7016    	0x7016  
+-#define	PCI_VENDOR_ID_DLINK		0x1186
+-#define	PCI_DEVICE_ID_DFE530TXP		0x1300
+-#define	PCI_VENDOR_ID_NS		0x100B
+-#define	PCI_DEVICE_ID_DP83815		0x0020
+-#define PCI_VENDOR_ID_OLICOM		0x108d
+-#define PCI_DEVICE_ID_OLICOM_OC3136	0x0001
+-#define PCI_DEVICE_ID_OLICOM_OC2315	0x0011
+-#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
+-#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
+-#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
+-#define PCI_DEVICE_ID_OLICOM_OC6151	0x0021
++struct pci_device;
++struct dev;
++typedef int (*pci_probe_t)(struct dev *, struct pci_device *);
+ 
+ struct pci_device {
+-	unsigned short	vendor, dev_id;
+-	const char	*name;
+-	unsigned int	membase;
+-	unsigned short	ioaddr;
+-	unsigned char	devfn;
+-	unsigned char	bus;
++	uint32_t		class;
++	uint16_t		vendor, dev_id;
++	const char		*name;
++	/* membase and ioaddr are silly and depricated */
++	unsigned int		membase;
++	unsigned int		ioaddr;
++	unsigned int		romaddr;
++	unsigned char		irq;
++	unsigned char		devfn;
++	unsigned char		bus;
++	unsigned char		use_specified;
++	const struct pci_driver	*driver;
++};
++
++extern void scan_pci_bus(int type, struct pci_device *dev);
++extern void find_pci(int type, struct pci_device *dev);
++
++extern int pcibios_read_config_byte(unsigned int bus, unsigned int device_fn, unsigned int where, uint8_t *value);
++extern int pcibios_write_config_byte (unsigned int bus, unsigned int device_fn, unsigned int where, uint8_t value);
++extern int pcibios_read_config_word(unsigned int bus, unsigned int device_fn, unsigned int where, uint16_t *value);
++extern int pcibios_write_config_word (unsigned int bus, unsigned int device_fn, unsigned int where, uint16_t value);
++extern int pcibios_read_config_dword(unsigned int bus, unsigned int device_fn, unsigned int where, uint32_t *value);
++extern int pcibios_write_config_dword(unsigned int bus, unsigned int device_fn, unsigned int where, uint32_t value);
++extern unsigned long pcibios_bus_base(unsigned int bus);
++extern void adjust_pci_device(struct pci_device *p);
++
++
++static inline int 
++pci_read_config_byte(struct pci_device *dev, unsigned int where, uint8_t *value)
++{
++	return pcibios_read_config_byte(dev->bus, dev->devfn, where, value);
++}
++static inline int 
++pci_write_config_byte(struct pci_device *dev, unsigned int where, uint8_t value)
++{
++	return pcibios_write_config_byte(dev->bus, dev->devfn, where, value);
++}
++static inline int 
++pci_read_config_word(struct pci_device *dev, unsigned int where, uint16_t *value)
++{
++	return pcibios_read_config_word(dev->bus, dev->devfn, where, value);
++}
++static inline int 
++pci_write_config_word(struct pci_device *dev, unsigned int where, uint16_t value)
++{
++	return pcibios_write_config_word(dev->bus, dev->devfn, where, value);
++}
++static inline int 
++pci_read_config_dword(struct pci_device *dev, unsigned int where, uint32_t *value)
++{
++	return pcibios_read_config_dword(dev->bus, dev->devfn, where, value);
++}
++static inline int 
++pci_write_config_dword(struct pci_device *dev, unsigned int where, uint32_t value)
++{
++	return pcibios_write_config_dword(dev->bus, dev->devfn, where, value);
++}
++
++/* Helper functions to find the size of a pci bar */
++extern unsigned long pci_bar_start(struct pci_device *dev, unsigned int bar);
++extern unsigned long pci_bar_size(struct pci_device *dev, unsigned int bar);
++/* Helper function to find pci capabilities */
++extern int pci_find_capability(struct pci_device *dev, int cap);
++struct pci_id {
++	unsigned short vendor, dev_id;
++	const char *name;
++};
++
++struct dev;
++/* Most pci drivers will use this */
++struct pci_driver {
++	int type;
++	const char *name;
++	pci_probe_t probe;
++	struct pci_id *ids;
++	int id_count;
++
++/* On a few occasions the hardware is standardized enough that
++ * we only need to know the class of the device and not the exact
++ * type to drive the device correctly.  If this is the case
++ * set a class value other than 0.
++ */
++	unsigned short class;
+ };
+ 
+-extern void	eth_pci_init(struct pci_device *);
++#define PCI_ROM(VENDOR_ID, DEVICE_ID, IMAGE, DESCRIPTION) \
++	{ VENDOR_ID, DEVICE_ID, IMAGE, }
+ 
+-extern int pcibios_read_config_byte(unsigned int bus, unsigned int device_fn, unsigned int where, unsigned char *value);
+-extern int pcibios_write_config_byte (unsigned int bus, unsigned int device_fn, unsigned int where, unsigned char value);
+-extern int pcibios_read_config_word(unsigned int bus, unsigned int device_fn, unsigned int where, unsigned short *value);
+-extern int pcibios_write_config_word (unsigned int bus, unsigned int device_fn, unsigned int where, unsigned short value);
+-extern int pcibios_read_config_dword(unsigned int bus, unsigned int device_fn, unsigned int where, unsigned int *value);
+-extern int pcibios_write_config_dword(unsigned int bus, unsigned int device_fn, unsigned int where, unsigned int value);
+-void adjust_pci_device(struct pci_device *p);
+ #endif	/* PCI_H */
+diff -Naur grub-0.97.orig/netboot/pci_ids.h grub-0.97/netboot/pci_ids.h
+--- grub-0.97.orig/netboot/pci_ids.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pci_ids.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,1809 @@
++/*
++ *	PCI Class, Vendor and Device IDs
++ *
++ *	Please keep sorted.
++ */
++
++/* Device classes and subclasses */
++
++#define PCI_CLASS_NOT_DEFINED		0x0000
++#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
++
++#define PCI_BASE_CLASS_STORAGE		0x01
++#define PCI_CLASS_STORAGE_SCSI		0x0100
++#define PCI_CLASS_STORAGE_IDE		0x0101
++#define PCI_CLASS_STORAGE_FLOPPY	0x0102
++#define PCI_CLASS_STORAGE_IPI		0x0103
++#define PCI_CLASS_STORAGE_RAID		0x0104
++#define PCI_CLASS_STORAGE_OTHER		0x0180
++
++#define PCI_BASE_CLASS_NETWORK		0x02
++#define PCI_CLASS_NETWORK_ETHERNET	0x0200
++#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
++#define PCI_CLASS_NETWORK_FDDI		0x0202
++#define PCI_CLASS_NETWORK_ATM		0x0203
++#define PCI_CLASS_NETWORK_OTHER		0x0280
++
++#define PCI_BASE_CLASS_DISPLAY		0x03
++#define PCI_CLASS_DISPLAY_VGA		0x0300
++#define PCI_CLASS_DISPLAY_XGA		0x0301
++#define PCI_CLASS_DISPLAY_3D		0x0302
++#define PCI_CLASS_DISPLAY_OTHER		0x0380
++
++#define PCI_BASE_CLASS_MULTIMEDIA	0x04
++#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
++#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
++#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
++#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
++
++#define PCI_BASE_CLASS_MEMORY		0x05
++#define PCI_CLASS_MEMORY_RAM		0x0500
++#define PCI_CLASS_MEMORY_FLASH		0x0501
++#define PCI_CLASS_MEMORY_OTHER		0x0580
++
++#define PCI_BASE_CLASS_BRIDGE		0x06
++#define PCI_CLASS_BRIDGE_HOST		0x0600
++#define PCI_CLASS_BRIDGE_ISA		0x0601
++#define PCI_CLASS_BRIDGE_EISA		0x0602
++#define PCI_CLASS_BRIDGE_MC		0x0603
++#define PCI_CLASS_BRIDGE_PCI		0x0604
++#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
++#define PCI_CLASS_BRIDGE_NUBUS		0x0606
++#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
++#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
++#define PCI_CLASS_BRIDGE_OTHER		0x0680
++
++#define PCI_BASE_CLASS_COMMUNICATION	0x07
++#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
++#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
++#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
++#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
++#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
++
++#define PCI_BASE_CLASS_SYSTEM		0x08
++#define PCI_CLASS_SYSTEM_PIC		0x0800
++#define PCI_CLASS_SYSTEM_DMA		0x0801
++#define PCI_CLASS_SYSTEM_TIMER		0x0802
++#define PCI_CLASS_SYSTEM_RTC		0x0803
++#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
++#define PCI_CLASS_SYSTEM_OTHER		0x0880
++
++#define PCI_BASE_CLASS_INPUT		0x09
++#define PCI_CLASS_INPUT_KEYBOARD	0x0900
++#define PCI_CLASS_INPUT_PEN		0x0901
++#define PCI_CLASS_INPUT_MOUSE		0x0902
++#define PCI_CLASS_INPUT_SCANNER		0x0903
++#define PCI_CLASS_INPUT_GAMEPORT	0x0904
++#define PCI_CLASS_INPUT_OTHER		0x0980
++
++#define PCI_BASE_CLASS_DOCKING		0x0a
++#define PCI_CLASS_DOCKING_GENERIC	0x0a00
++#define PCI_CLASS_DOCKING_OTHER		0x0a80
++
++#define PCI_BASE_CLASS_PROCESSOR	0x0b
++#define PCI_CLASS_PROCESSOR_386		0x0b00
++#define PCI_CLASS_PROCESSOR_486		0x0b01
++#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
++#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
++#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
++#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
++#define PCI_CLASS_PROCESSOR_CO		0x0b40
++
++#define PCI_BASE_CLASS_SERIAL		0x0c
++#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
++#define PCI_CLASS_SERIAL_ACCESS		0x0c01
++#define PCI_CLASS_SERIAL_SSA		0x0c02
++#define PCI_CLASS_SERIAL_USB		0x0c03
++#define PCI_CLASS_SERIAL_FIBER		0x0c04
++#define PCI_CLASS_SERIAL_SMBUS		0x0c05
++
++#define PCI_BASE_CLASS_INTELLIGENT	0x0e
++#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
++
++#define PCI_BASE_CLASS_SATELLITE	0x0f
++#define PCI_CLASS_SATELLITE_TV		0x0f00
++#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
++#define PCI_CLASS_SATELLITE_VOICE	0x0f03
++#define PCI_CLASS_SATELLITE_DATA	0x0f04
++
++#define PCI_BASE_CLASS_CRYPT		0x10
++#define PCI_CLASS_CRYPT_NETWORK		0x1000
++#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
++#define PCI_CLASS_CRYPT_OTHER		0x1080
++
++#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
++#define PCI_CLASS_SP_DPIO		0x1100
++#define PCI_CLASS_SP_OTHER		0x1180
++
++#define PCI_CLASS_OTHERS		0xff
++
++/* Vendors and devices.  Sort key: vendor first, device next. */
++
++#define PCI_VENDOR_ID_DYNALINK		0x0675
++#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
++
++#define PCI_VENDOR_ID_BERKOM			0x0871
++#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
++#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
++#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
++#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
++
++#define PCI_VENDOR_ID_COMPAQ		0x0e11
++#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
++#define PCI_DEVICE_ID_COMPAQ_1280	0x3033
++#define PCI_DEVICE_ID_COMPAQ_TRIFLEX	0x4000
++#define PCI_DEVICE_ID_COMPAQ_6010	0x6010
++#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
++#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
++#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
++#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
++#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
++#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
++#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
++#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
++#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
++#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
++#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
++
++#define PCI_VENDOR_ID_NCR		0x1000
++#define PCI_VENDOR_ID_LSI_LOGIC		0x1000
++#define PCI_DEVICE_ID_NCR_53C810	0x0001
++#define PCI_DEVICE_ID_NCR_53C820	0x0002
++#define PCI_DEVICE_ID_NCR_53C825	0x0003
++#define PCI_DEVICE_ID_NCR_53C815	0x0004
++#define PCI_DEVICE_ID_LSI_53C810AP	0x0005
++#define PCI_DEVICE_ID_NCR_53C860	0x0006
++#define PCI_DEVICE_ID_LSI_53C1510	0x000a
++#define PCI_DEVICE_ID_NCR_53C896	0x000b
++#define PCI_DEVICE_ID_NCR_53C895	0x000c
++#define PCI_DEVICE_ID_NCR_53C885	0x000d
++#define PCI_DEVICE_ID_NCR_53C875	0x000f
++#define PCI_DEVICE_ID_NCR_53C1510	0x0010
++#define PCI_DEVICE_ID_LSI_53C895A	0x0012
++#define PCI_DEVICE_ID_LSI_53C875A	0x0013
++#define PCI_DEVICE_ID_LSI_53C1010_33	0x0020
++#define PCI_DEVICE_ID_LSI_53C1010_66	0x0021
++#define PCI_DEVICE_ID_LSI_53C1030	0x0030
++#define PCI_DEVICE_ID_LSI_53C1035	0x0040
++#define PCI_DEVICE_ID_NCR_53C875J	0x008f
++#define PCI_DEVICE_ID_LSI_FC909		0x0621
++#define PCI_DEVICE_ID_LSI_FC929		0x0622
++#define PCI_DEVICE_ID_LSI_FC929_LAN	0x0623
++#define PCI_DEVICE_ID_LSI_FC919		0x0624
++#define PCI_DEVICE_ID_LSI_FC919_LAN	0x0625
++#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
++#define PCI_DEVICE_ID_LSI_61C102	0x0901
++#define PCI_DEVICE_ID_LSI_63C815	0x1000
++
++#define PCI_VENDOR_ID_ATI		0x1002
++/* Mach64 */
++#define PCI_DEVICE_ID_ATI_68800		0x4158
++#define PCI_DEVICE_ID_ATI_215CT222	0x4354
++#define PCI_DEVICE_ID_ATI_210888CX	0x4358
++#define PCI_DEVICE_ID_ATI_215ET222	0x4554
++/* Mach64 / Rage */
++#define PCI_DEVICE_ID_ATI_215GB		0x4742
++#define PCI_DEVICE_ID_ATI_215GD		0x4744
++#define PCI_DEVICE_ID_ATI_215GI		0x4749
++#define PCI_DEVICE_ID_ATI_215GP		0x4750
++#define PCI_DEVICE_ID_ATI_215GQ		0x4751
++#define PCI_DEVICE_ID_ATI_215XL		0x4752
++#define PCI_DEVICE_ID_ATI_215GT		0x4754
++#define PCI_DEVICE_ID_ATI_215GTB	0x4755
++#define PCI_DEVICE_ID_ATI_215_IV	0x4756
++#define PCI_DEVICE_ID_ATI_215_IW	0x4757
++#define PCI_DEVICE_ID_ATI_215_IZ	0x475A
++#define PCI_DEVICE_ID_ATI_210888GX	0x4758
++#define PCI_DEVICE_ID_ATI_215_LB	0x4c42
++#define PCI_DEVICE_ID_ATI_215_LD	0x4c44
++#define PCI_DEVICE_ID_ATI_215_LG	0x4c47
++#define PCI_DEVICE_ID_ATI_215_LI	0x4c49
++#define PCI_DEVICE_ID_ATI_215_LM	0x4c4D
++#define PCI_DEVICE_ID_ATI_215_LN	0x4c4E
++#define PCI_DEVICE_ID_ATI_215_LR	0x4c52
++#define PCI_DEVICE_ID_ATI_215_LS	0x4c53
++#define PCI_DEVICE_ID_ATI_264_LT	0x4c54
++/* Mach64 VT */
++#define PCI_DEVICE_ID_ATI_264VT		0x5654
++#define PCI_DEVICE_ID_ATI_264VU		0x5655
++#define PCI_DEVICE_ID_ATI_264VV		0x5656
++/* Rage128 Pro GL */
++#define PCI_DEVICE_ID_ATI_Rage128_PA	0x5041
++#define PCI_DEVICE_ID_ATI_Rage128_PB	0x5042
++#define PCI_DEVICE_ID_ATI_Rage128_PC	0x5043
++#define PCI_DEVICE_ID_ATI_Rage128_PD	0x5044
++#define PCI_DEVICE_ID_ATI_Rage128_PE	0x5045
++#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
++/* Rage128 Pro VR */
++#define PCI_DEVICE_ID_ATI_RAGE128_PG	0x5047
++#define PCI_DEVICE_ID_ATI_RAGE128_PH	0x5048
++#define PCI_DEVICE_ID_ATI_RAGE128_PI	0x5049
++#define PCI_DEVICE_ID_ATI_RAGE128_PJ	0x504A
++#define PCI_DEVICE_ID_ATI_RAGE128_PK	0x504B
++#define PCI_DEVICE_ID_ATI_RAGE128_PL	0x504C
++#define PCI_DEVICE_ID_ATI_RAGE128_PM	0x504D
++#define PCI_DEVICE_ID_ATI_RAGE128_PN	0x504E
++#define PCI_DEVICE_ID_ATI_RAGE128_PO	0x504F
++#define PCI_DEVICE_ID_ATI_RAGE128_PP	0x5050
++#define PCI_DEVICE_ID_ATI_RAGE128_PQ	0x5051
++#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
++#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
++#define PCI_DEVICE_ID_ATI_RAGE128_PS	0x5053
++#define PCI_DEVICE_ID_ATI_RAGE128_PT	0x5054
++#define PCI_DEVICE_ID_ATI_RAGE128_PU	0x5055
++#define PCI_DEVICE_ID_ATI_RAGE128_PV	0x5056
++#define PCI_DEVICE_ID_ATI_RAGE128_PW	0x5057
++#define PCI_DEVICE_ID_ATI_RAGE128_PX	0x5058
++/* Rage128 GL */
++#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
++#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
++#define PCI_DEVICE_ID_ATI_RAGE128_RG	0x534b
++#define PCI_DEVICE_ID_ATI_RAGE128_RH	0x534c
++#define PCI_DEVICE_ID_ATI_RAGE128_RI	0x534d
++/* Rage128 VR */
++#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
++#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
++#define PCI_DEVICE_ID_ATI_RAGE128_RM	0x5345
++#define PCI_DEVICE_ID_ATI_RAGE128_RN	0x5346
++#define PCI_DEVICE_ID_ATI_RAGE128_RO	0x5347
++/* Rage128 M3 */
++#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
++#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
++/* Rage128 Pro Ultra */
++#define PCI_DEVICE_ID_ATI_RAGE128_U1	0x5446
++#define PCI_DEVICE_ID_ATI_RAGE128_U2	0x544C
++#define PCI_DEVICE_ID_ATI_RAGE128_U3	0x5452
++/* Radeon M4 */
++#define PCI_DEVICE_ID_ATI_RADEON_LE	0x4d45
++#define PCI_DEVICE_ID_ATI_RADEON_LF	0x4d46
++/* Radeon NV-100 */
++#define PCI_DEVICE_ID_ATI_RADEON_N1	0x5159
++#define PCI_DEVICE_ID_ATI_RADEON_N2	0x515a
++/* Radeon */
++#define PCI_DEVICE_ID_ATI_RADEON_RA	0x5144
++#define PCI_DEVICE_ID_ATI_RADEON_RB	0x5145
++#define PCI_DEVICE_ID_ATI_RADEON_RC	0x5146
++#define PCI_DEVICE_ID_ATI_RADEON_RD	0x5147
++
++#define PCI_VENDOR_ID_VLSI		0x1004
++#define PCI_DEVICE_ID_VLSI_82C592	0x0005
++#define PCI_DEVICE_ID_VLSI_82C593	0x0006
++#define PCI_DEVICE_ID_VLSI_82C594	0x0007
++#define PCI_DEVICE_ID_VLSI_82C597	0x0009
++#define PCI_DEVICE_ID_VLSI_82C541	0x000c
++#define PCI_DEVICE_ID_VLSI_82C543	0x000d
++#define PCI_DEVICE_ID_VLSI_82C532	0x0101
++#define PCI_DEVICE_ID_VLSI_82C534	0x0102
++#define PCI_DEVICE_ID_VLSI_82C535	0x0104
++#define PCI_DEVICE_ID_VLSI_82C147	0x0105
++#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
++
++#define PCI_VENDOR_ID_ADL		0x1005
++#define PCI_DEVICE_ID_ADL_2301		0x2301
++
++#define PCI_VENDOR_ID_NS		0x100b
++#define PCI_DEVICE_ID_NS_87415		0x0002
++#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
++#define PCI_DEVICE_ID_NS_87560_USB	0x0012
++#define PCI_DEVICE_ID_NS_83815		0x0020
++#define	PCI_DEVICE_ID_DP83815		0x0020
++#define PCI_DEVICE_ID_NS_83820		0x0022
++#define PCI_DEVICE_ID_NS_87410		0xd001
++
++#define PCI_VENDOR_ID_TSENG		0x100c
++#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
++#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
++#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
++#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
++#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
++
++#define PCI_VENDOR_ID_WEITEK		0x100e
++#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
++#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
++
++#define PCI_VENDOR_ID_DEC		0x1011
++#define PCI_DEVICE_ID_DEC_BRD		0x0001
++#define PCI_DEVICE_ID_DEC_TULIP		0x0002
++#define PCI_DEVICE_ID_DEC_TGA		0x0004
++#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
++#define PCI_DEVICE_ID_DEC_TGA2		0x000D
++#define PCI_DEVICE_ID_DEC_FDDI		0x000F
++#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
++#define PCI_DEVICE_ID_DEC_21142		0x0019
++#define PCI_DEVICE_ID_DEC_21052		0x0021
++#define PCI_DEVICE_ID_DEC_21150		0x0022
++#define PCI_DEVICE_ID_DEC_21152		0x0024
++#define PCI_DEVICE_ID_DEC_21153		0x0025
++#define PCI_DEVICE_ID_DEC_21154		0x0026
++#define PCI_DEVICE_ID_DEC_21285		0x1065
++#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
++
++#define PCI_VENDOR_ID_CIRRUS		0x1013
++#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
++#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
++#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
++#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
++#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
++#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
++#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
++#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
++#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
++#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
++#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
++#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
++#define PCI_DEVICE_ID_CIRRUS_7542	0x1200
++#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
++#define PCI_DEVICE_ID_CIRRUS_7541	0x1204
++
++#define PCI_VENDOR_ID_IBM		0x1014
++#define PCI_DEVICE_ID_IBM_FIRE_CORAL	0x000a
++#define PCI_DEVICE_ID_IBM_TR		0x0018
++#define PCI_DEVICE_ID_IBM_82G2675	0x001d
++#define PCI_DEVICE_ID_IBM_MCA		0x0020
++#define PCI_DEVICE_ID_IBM_82351		0x0022
++#define PCI_DEVICE_ID_IBM_PYTHON	0x002d
++#define PCI_DEVICE_ID_IBM_SERVERAID	0x002e
++#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
++#define PCI_DEVICE_ID_IBM_MPIC		0x0046
++#define PCI_DEVICE_ID_IBM_3780IDSP	0x007d
++#define PCI_DEVICE_ID_IBM_CHUKAR	0x0096
++#define	PCI_DEVICE_ID_IBM_405GP		0x0156
++#define PCI_DEVICE_ID_IBM_SERVERAIDI960	0x01bd
++#define PCI_DEVICE_ID_IBM_MPIC_2	0xffff
++
++#define PCI_VENDOR_ID_COMPEX2		0x101a // pci.ids says "AT&T GIS (NCR)"
++#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
++
++#define PCI_VENDOR_ID_WD		0x101c
++#define PCI_DEVICE_ID_WD_7197		0x3296
++
++#define PCI_VENDOR_ID_AMI		0x101e
++#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
++#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
++#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
++
++#define PCI_VENDOR_ID_AMD		0x1022
++
++#define PCI_DEVICE_ID_AMD_LANCE		0x2000
++#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
++#define PCI_DEVICE_ID_AMD_HOMEPNA	0x2001
++#define PCI_DEVICE_ID_AMD_SCSI		0x2020
++#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
++#define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
++#define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
++#define PCI_DEVIDE_ID_AMD_FE_GATE_700D	0x700D
++#define PCI_DEVICE_ID_AMD_FE_GATE_700E	0x700E
++#define PCI_DEVICE_ID_AMD_FE_GATE_700F	0x700F
++#define PCI_DEVICE_ID_AMD_COBRA_7400	0x7400
++#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
++#define PCI_DEVICE_ID_AMD_COBRA_7403	0x7403
++#define PCI_DEVICE_ID_AMD_COBRA_7404	0x7404
++#define PCI_DEVICE_ID_AMD_VIPER_7408	0x7408
++#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
++#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
++#define PCI_DEVICE_ID_AMD_VIPER_740C	0x740C
++#define PCI_DEVICE_ID_AMD_VIPER_7410	0x7410
++#define PCI_DEVICE_ID_AMD_VIPER_7411	0x7411
++#define PCI_DEVICE_ID_AMD_VIPER_7413	0x7413
++#define PCI_DEVICE_ID_AMD_VIPER_7414	0x7414
++#define PCI_DEVICE_ID_AMD_VIPER_7440	0x7440
++#define PCI_DEVICE_ID_AMD_VIPER_7441	0x7441
++#define PCI_DEVICE_ID_AMD_VIPER_7443	0x7443
++#define PCI_DEVICE_ID_AMD_VIPER_7448	0x7448
++#define PCI_DEVICE_ID_AMD_VIPER_7449	0x7449
++
++#define PCI_VENDOR_ID_TRIDENT		0x1023
++#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
++#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
++#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
++#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
++#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
++#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
++#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
++#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
++#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
++#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
++#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
++#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
++#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
++#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
++#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
++#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
++#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
++
++#define PCI_VENDOR_ID_AI		0x1025
++#define PCI_DEVICE_ID_AI_M1435		0x1435
++
++#define PCI_VENDOR_ID_DELL              0x1028
++
++#define PCI_VENDOR_ID_MATROX		0x102B
++#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
++#define PCI_DEVICE_ID_MATROX_MIL	0x0519
++#define PCI_DEVICE_ID_MATROX_MYS	0x051A
++#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
++#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
++#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
++#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
++#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
++#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
++#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
++#define	PCI_DEVICE_ID_MATROX_G400	0x0525
++#define PCI_DEVICE_ID_MATROX_G550	0x2527
++#define PCI_DEVICE_ID_MATROX_VIA	0x4536
++
++#define PCI_VENDOR_ID_CT		0x102c
++#define PCI_DEVICE_ID_CT_65545		0x00d8
++#define PCI_DEVICE_ID_CT_65548		0x00dc
++#define PCI_DEVICE_ID_CT_65550		0x00e0
++#define PCI_DEVICE_ID_CT_65554		0x00e4
++#define PCI_DEVICE_ID_CT_65555		0x00e5
++
++#define PCI_VENDOR_ID_MIRO		0x1031
++#define PCI_DEVICE_ID_MIRO_36050	0x5601
++
++#define PCI_VENDOR_ID_NEC		0x1033
++#define PCI_DEVICE_ID_NEC_PCX2		0x0046
++#define PCI_DEVICE_ID_NEC_NILE4		0x005a
++#define PCI_DEVICE_ID_NEC_VRC5476       0x009b
++
++#define PCI_VENDOR_ID_FD		0x1036
++#define PCI_DEVICE_ID_FD_36C70		0x0000
++
++#define PCI_VENDOR_ID_SIS         	0x1039
++#define PCI_VENDOR_ID_SI		0x1039
++#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
++#define PCI_DEVICE_ID_SI_6202		0x0002
++#define PCI_DEVICE_ID_SI_503		0x0008
++#define PCI_DEVICE_ID_SI_ACPI		0x0009
++#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
++#define PCI_DEVICE_ID_SI_6205		0x0205
++#define PCI_DEVICE_ID_SI_501		0x0406
++#define PCI_DEVICE_ID_SI_496		0x0496
++#define PCI_DEVICE_ID_SI_300		0x0300
++#define PCI_DEVICE_ID_SI_315H		0x0310
++#define PCI_DEVICE_ID_SI_315		0x0315
++#define PCI_DEVICE_ID_SI_315PRO		0x0325
++#define PCI_DEVICE_ID_SI_530		0x0530
++#define PCI_DEVICE_ID_SI_540		0x0540
++#define PCI_DEVICE_ID_SI_550		0x0550
++#define PCI_DEVICE_ID_SI_601		0x0601
++#define PCI_DEVICE_ID_SI_620		0x0620
++#define PCI_DEVICE_ID_SI_630		0x0630
++#define PCI_DEVICE_ID_SI_635		0x0635
++#define PCI_DEVICE_ID_SI_640		0x0640
++#define PCI_DEVICE_ID_SI_645		0x0645
++#define PCI_DEVICE_ID_SI_650		0x0650
++#define PCI_DEVICE_ID_SI_730		0x0730
++#define PCI_DEVICE_ID_SI_735		0x0735
++#define PCI_DEVICE_ID_SI_740		0x0740
++#define PCI_DEVICE_ID_SI_745		0x0745
++#define PCI_DEVICE_ID_SI_750		0x0750
++#define PCI_DEVICE_ID_SI_900		0x0900
++#define PCI_DEVICE_ID_SIS900		0x0900
++#define PCI_DEVICE_ID_SI_5107		0x5107
++#define PCI_DEVICE_ID_SI_5300		0x5300
++#define PCI_DEVICE_ID_SI_540_VGA	0x5300
++#define PCI_DEVICE_ID_SI_550_VGA	0x5315
++#define PCI_DEVICE_ID_SI_5511		0x5511
++#define PCI_DEVICE_ID_SI_5513		0x5513
++#define PCI_DEVICE_ID_SI_5571		0x5571
++#define PCI_DEVICE_ID_SI_5591		0x5591
++#define PCI_DEVICE_ID_SI_5597		0x5597
++#define PCI_DEVICE_ID_SI_5598		0x5598
++#define PCI_DEVICE_ID_SI_5600		0x5600
++#define PCI_DEVICE_ID_SI_6300		0x6300
++#define PCI_DEVICE_ID_SI_630_VGA	0x6300
++#define PCI_DEVICE_ID_SI_6306		0x6306
++#define PCI_DEVICE_ID_SI_6326		0x6326
++#define PCI_DEVICE_ID_SI_7001		0x7001
++#define PCI_DEVICE_ID_SI_7016		0x7016
++#define PCI_DEVICE_ID_SIS7016    	0x7016  
++#define PCI_DEVICE_ID_SI_730_VGA	0x7300
++
++#define PCI_VENDOR_ID_HP		0x103c
++#define PCI_DEVICE_ID_HP_DONNER_GFX	0x1008
++#define PCI_DEVICE_ID_HP_TACHYON	0x1028
++#define PCI_DEVICE_ID_HP_TACHLITE	0x1029
++#define PCI_DEVICE_ID_HP_J2585A		0x1030
++#define PCI_DEVICE_ID_HP_J2585B		0x1031
++#define PCI_DEVICE_ID_HP_SAS		0x1048
++#define PCI_DEVICE_ID_HP_DIVA1		0x1049
++#define PCI_DEVICE_ID_HP_DIVA2		0x104A
++#define PCI_DEVICE_ID_HP_SP2_0		0x104B
++
++#define PCI_VENDOR_ID_PCTECH		0x1042
++#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
++#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
++#define PCI_DEVICE_ID_PCTECH_SAMURAI_0	0x3000
++#define PCI_DEVICE_ID_PCTECH_SAMURAI_1	0x3010
++#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
++
++#define PCI_VENDOR_ID_ASUSTEK		0x1043
++#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
++
++#define PCI_VENDOR_ID_DPT		0x1044
++#define PCI_DEVICE_ID_DPT		0xa400
++
++#define PCI_VENDOR_ID_OPTI		0x1045
++#define PCI_DEVICE_ID_OPTI_92C178	0xc178
++#define PCI_DEVICE_ID_OPTI_82C557	0xc557
++#define PCI_DEVICE_ID_OPTI_82C558	0xc558
++#define PCI_DEVICE_ID_OPTI_82C621	0xc621
++#define PCI_DEVICE_ID_OPTI_82C700	0xc700
++#define PCI_DEVICE_ID_OPTI_82C701	0xc701
++#define PCI_DEVICE_ID_OPTI_82C814	0xc814
++#define PCI_DEVICE_ID_OPTI_82C822	0xc822
++#define PCI_DEVICE_ID_OPTI_82C861	0xc861
++#define PCI_DEVICE_ID_OPTI_82C825	0xd568
++
++#define PCI_VENDOR_ID_ELSA		0x1048
++#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
++#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
++
++#define PCI_VENDOR_ID_ELSA		0x1048
++#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
++#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
++
++#define PCI_VENDOR_ID_SGS		0x104a
++#define PCI_DEVICE_ID_SGS_2000		0x0008
++#define PCI_DEVICE_ID_SGS_1764		0x0009
++
++#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
++#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
++#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
++#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
++
++#define PCI_VENDOR_ID_TI		0x104c
++#define PCI_DEVICE_ID_TI_TVP4010	0x3d04
++#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
++#define PCI_DEVICE_ID_TI_1130		0xac12
++#define PCI_DEVICE_ID_TI_1031		0xac13
++#define PCI_DEVICE_ID_TI_1131		0xac15
++#define PCI_DEVICE_ID_TI_1250		0xac16
++#define PCI_DEVICE_ID_TI_1220		0xac17
++#define PCI_DEVICE_ID_TI_1221		0xac19
++#define PCI_DEVICE_ID_TI_1210		0xac1a
++#define PCI_DEVICE_ID_TI_1410		0xac50
++#define PCI_DEVICE_ID_TI_1450		0xac1b
++#define PCI_DEVICE_ID_TI_1225		0xac1c
++#define PCI_DEVICE_ID_TI_1251A		0xac1d
++#define PCI_DEVICE_ID_TI_1211		0xac1e
++#define PCI_DEVICE_ID_TI_1251B		0xac1f
++#define PCI_DEVICE_ID_TI_4410		0xac41
++#define PCI_DEVICE_ID_TI_4451		0xac42
++#define PCI_DEVICE_ID_TI_1420		0xac51
++
++#define PCI_VENDOR_ID_SONY		0x104d
++#define PCI_DEVICE_ID_SONY_CXD3222	0x8039
++
++#define PCI_VENDOR_ID_OAK		0x104e
++#define PCI_DEVICE_ID_OAK_OTI107	0x0107
++
++/* Winbond have two vendor IDs! See 0x10ad as well */
++#define PCI_VENDOR_ID_WINBOND2		0x1050
++#define PCI_DEVICE_ID_WINBOND2_89C840   0x0840
++#define PCI_DEVICE_ID_WINBOND2_89C940	0x0940
++#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
++#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
++
++#define PCI_VENDOR_ID_ANIGMA		0x1051
++#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
++  
++#define PCI_VENDOR_ID_EFAR		0x1055
++#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
++#define PCI_DEVICE_ID_EFAR_SLC90E66_0	0x9460
++#define PCI_DEVICE_ID_EFAR_SLC90E66_2	0x9462
++#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
++
++#define PCI_VENDOR_ID_MOTOROLA		0x1057
++#define PCI_VENDOR_ID_MOTOROLA_OOPS	0x1507
++#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
++#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
++#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
++#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
++#define PCI_DEVICE_ID_MOTOROLA_CPX8216	0x4806
++
++#define PCI_VENDOR_ID_PROMISE		0x105a
++#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
++#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
++#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
++#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
++#define PCI_DEVICE_ID_PROMISE_20268	0x4d68
++#define PCI_DEVICE_ID_PROMISE_20268R	0x6268
++#define PCI_DEVICE_ID_PROMISE_20269	0x4d69
++#define PCI_DEVICE_ID_PROMISE_20275	0x1275
++#define PCI_DEVICE_ID_PROMISE_5300	0x5300
++
++#define PCI_VENDOR_ID_N9		0x105d
++#define PCI_DEVICE_ID_N9_I128		0x2309
++#define PCI_DEVICE_ID_N9_I128_2		0x2339
++#define PCI_DEVICE_ID_N9_I128_T2R	0x493d
++
++#define PCI_VENDOR_ID_UMC		0x1060
++#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
++#define PCI_DEVICE_ID_UMC_UM8891A	0x0891
++#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
++#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
++#define PCI_DEVICE_ID_UMC_UM8881F	0x8881
++#define PCI_DEVICE_ID_UMC_UM8886F	0x8886
++#define PCI_DEVICE_ID_UMC_UM9017F	0x9017
++#define PCI_DEVICE_ID_UMC_UM8886N	0xe886
++#define PCI_DEVICE_ID_UMC_UM8891N	0xe891
++
++#define PCI_VENDOR_ID_X			0x1061
++#define PCI_DEVICE_ID_X_AGX016		0x0001
++
++#define PCI_VENDOR_ID_MYLEX		0x1069
++#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
++#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
++#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
++#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
++#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
++#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
++
++#define PCI_VENDOR_ID_PICOP		0x1066
++#define PCI_DEVICE_ID_PICOP_PT86C52X	0x0001
++#define PCI_DEVICE_ID_PICOP_PT80C524	0x8002
++
++#define PCI_VENDOR_ID_APPLE		0x106b
++#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
++#define PCI_DEVICE_ID_APPLE_GC		0x0002
++#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
++#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
++#define PCI_DEVICE_ID_APPLE_KL_USB	0x0019
++#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
++#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
++#define PCI_DEVICE_ID_APPLE_UNI_N_FW2	0x0030
++
++#define PCI_VENDOR_ID_YAMAHA		0x1073
++#define PCI_DEVICE_ID_YAMAHA_724	0x0004
++#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
++#define PCI_DEVICE_ID_YAMAHA_740	0x000a
++#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
++#define PCI_DEVICE_ID_YAMAHA_744	0x0010
++#define PCI_DEVICE_ID_YAMAHA_754	0x0012
++
++#define PCI_VENDOR_ID_NEXGEN		0x1074
++#define PCI_DEVICE_ID_NEXGEN_82C501	0x4e78
++
++#define PCI_VENDOR_ID_QLOGIC		0x1077
++#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
++#define PCI_DEVICE_ID_QLOGIC_ISP1022	0x1022
++#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
++#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
++
++#define PCI_VENDOR_ID_CYRIX		0x1078
++#define PCI_DEVICE_ID_CYRIX_5510	0x0000
++#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
++#define PCI_DEVICE_ID_CYRIX_5520	0x0002
++#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
++#define PCI_DEVICE_ID_CYRIX_5530_SMI	0x0101
++#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
++#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
++#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
++
++#define PCI_VENDOR_ID_LEADTEK		0x107d
++#define PCI_DEVICE_ID_LEADTEK_805	0x0000
++
++#define PCI_VENDOR_ID_INTERPHASE	0x107e
++#define PCI_DEVICE_ID_INTERPHASE_5526	0x0004
++#define PCI_DEVICE_ID_INTERPHASE_55x6	0x0005
++#define PCI_DEVICE_ID_INTERPHASE_5575	0x0008
++
++#define PCI_VENDOR_ID_CONTAQ		0x1080
++#define PCI_DEVICE_ID_CONTAQ_82C599	0x0600
++#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
++
++#define PCI_VENDOR_ID_FOREX		0x1083
++
++#define PCI_VENDOR_ID_OLICOM		0x108d
++#define PCI_DEVICE_ID_OLICOM_OC3136	0x0001
++#define PCI_DEVICE_ID_OLICOM_OC2315	0x0011
++#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
++#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
++#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
++#define PCI_DEVICE_ID_OLICOM_OC6151	0x0021
++
++#define PCI_VENDOR_ID_SUN		0x108e
++#define PCI_DEVICE_ID_SUN_EBUS		0x1000
++#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
++#define PCI_DEVICE_ID_SUN_RIO_EBUS	0x1100
++#define PCI_DEVICE_ID_SUN_RIO_GEM	0x1101
++#define PCI_DEVICE_ID_SUN_RIO_1394	0x1102
++#define PCI_DEVICE_ID_SUN_RIO_USB	0x1103
++#define PCI_DEVICE_ID_SUN_GEM		0x2bad
++#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
++#define PCI_DEVICE_ID_SUN_PBM		0x8000
++#define PCI_DEVICE_ID_SUN_SCHIZO	0x8001
++#define PCI_DEVICE_ID_SUN_SABRE		0xa000
++#define PCI_DEVICE_ID_SUN_HUMMINGBIRD	0xa001
++
++#define PCI_VENDOR_ID_CMD		0x1095
++#define PCI_DEVICE_ID_CMD_640		0x0640
++#define PCI_DEVICE_ID_CMD_643		0x0643
++#define PCI_DEVICE_ID_CMD_646		0x0646
++#define PCI_DEVICE_ID_CMD_647		0x0647
++#define PCI_DEVICE_ID_CMD_648		0x0648
++#define PCI_DEVICE_ID_CMD_649		0x0649
++#define PCI_DEVICE_ID_CMD_670		0x0670
++#define PCI_DEVICE_ID_CMD_680		0x0680
++
++#define PCI_VENDOR_ID_VISION		0x1098
++#define PCI_DEVICE_ID_VISION_QD8500	0x0001
++#define PCI_DEVICE_ID_VISION_QD8580	0x0002
++
++#define PCI_VENDOR_ID_BROOKTREE		0x109e
++#define PCI_DEVICE_ID_BROOKTREE_848	0x0350
++#define PCI_DEVICE_ID_BROOKTREE_849A	0x0351
++#define PCI_DEVICE_ID_BROOKTREE_878_1	0x036e
++#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
++#define PCI_DEVICE_ID_BROOKTREE_8474	0x8474
++
++#define PCI_VENDOR_ID_SIERRA		0x10a8
++#define PCI_DEVICE_ID_SIERRA_STB	0x0000
++
++#define PCI_VENDOR_ID_SGI		0x10a9
++#define PCI_DEVICE_ID_SGI_IOC3		0x0003
++
++#define PCI_VENDOR_ID_ACC		0x10aa
++#define PCI_DEVICE_ID_ACC_2056		0x0000
++
++#define PCI_VENDOR_ID_WINBOND		0x10ad
++#define PCI_DEVICE_ID_WINBOND_83769	0x0001
++#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
++#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
++
++#define PCI_VENDOR_ID_DATABOOK		0x10b3
++#define PCI_DEVICE_ID_DATABOOK_87144	0xb106
++
++#define PCI_VENDOR_ID_PLX		0x10b5
++#define PCI_DEVICE_ID_PLX_R685		0x1030
++#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
++#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
++#define PCI_DEVICE_ID_PLX_1077		0x1077
++#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
++#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
++#define PCI_DEVICE_ID_PLX_R753		0x1152
++#define PCI_DEVICE_ID_PLX_9050		0x9050
++#define PCI_DEVICE_ID_PLX_9060		0x9060
++#define PCI_DEVICE_ID_PLX_9060ES	0x906E
++#define PCI_DEVICE_ID_PLX_9060SD	0x906D
++#define PCI_DEVICE_ID_PLX_9080		0x9080
++#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
++
++#define PCI_VENDOR_ID_MADGE		0x10b6
++#define PCI_DEVICE_ID_MADGE_MK2		0x0002
++#define PCI_DEVICE_ID_MADGE_C155S	0x1001
++
++#define PCI_VENDOR_ID_3COM		0x10b7
++#define PCI_DEVICE_ID_3COM_3C985	0x0001
++#define PCI_DEVICE_ID_3COM_3C339	0x3390
++#define PCI_DEVICE_ID_3COM_3C590	0x5900
++#define PCI_DEVICE_ID_3COM_3C595	0x5950
++#define PCI_DEVICE_ID_3COM_3C595TX	0x5950
++#define PCI_DEVICE_ID_3COM_3C595_1	0x5951
++#define PCI_DEVICE_ID_3COM_3C595T4	0x5951
++#define PCI_DEVICE_ID_3COM_3C595_2	0x5952
++#define PCI_DEVICE_ID_3COM_3C595MII	0x5952
++#define PCI_DEVICE_ID_3COM_3C900TPO	0x9000
++#define PCI_DEVICE_ID_3COM_3C900COMBO	0x9001
++#define PCI_DEVICE_ID_3COM_3C905TX	0x9050
++#define PCI_DEVICE_ID_3COM_3C905T4	0x9051
++#define PCI_DEVICE_ID_3COM_3C905B_TX	0x9055
++#define PCI_DEVICE_ID_3COM_3C905C_TXM	0x9200
++
++#define PCI_VENDOR_ID_SMC		0x10b8
++#define PCI_DEVICE_ID_SMC_EPIC100	0x0005
++
++#define PCI_VENDOR_ID_SUNDANCE		0x13F0
++#define PCI_DEVICE_ID_SUNDANCE_ALTA	0x0201
++
++#define PCI_VENDOR_ID_AL		0x10b9
++#define PCI_DEVICE_ID_AL_M1445		0x1445
++#define PCI_DEVICE_ID_AL_M1449		0x1449
++#define PCI_DEVICE_ID_AL_M1451		0x1451
++#define PCI_DEVICE_ID_AL_M1461		0x1461
++#define PCI_DEVICE_ID_AL_M1489		0x1489
++#define PCI_DEVICE_ID_AL_M1511		0x1511
++#define PCI_DEVICE_ID_AL_M1513		0x1513
++#define PCI_DEVICE_ID_AL_M1521		0x1521
++#define PCI_DEVICE_ID_AL_M1523		0x1523
++#define PCI_DEVICE_ID_AL_M1531		0x1531
++#define PCI_DEVICE_ID_AL_M1533		0x1533
++#define PCI_DEVICE_ID_AL_M1541		0x1541
++#define PCI_DEVICE_ID_AL_M1621          0x1621
++#define PCI_DEVICE_ID_AL_M1631          0x1631
++#define PCI_DEVICE_ID_AL_M1641          0x1641
++#define PCI_DEVICE_ID_AL_M1647          0x1647
++#define PCI_DEVICE_ID_AL_M1651          0x1651
++#define PCI_DEVICE_ID_AL_M1543		0x1543
++#define PCI_DEVICE_ID_AL_M3307		0x3307
++#define PCI_DEVICE_ID_AL_M4803		0x5215
++#define PCI_DEVICE_ID_AL_M5219		0x5219
++#define PCI_DEVICE_ID_AL_M5229		0x5229
++#define PCI_DEVICE_ID_AL_M5237		0x5237
++#define PCI_DEVICE_ID_AL_M5243		0x5243
++#define PCI_DEVICE_ID_AL_M5451		0x5451
++#define PCI_DEVICE_ID_AL_M7101		0x7101
++
++#define PCI_VENDOR_ID_MITSUBISHI	0x10ba
++
++#define PCI_VENDOR_ID_SURECOM		0x10bd
++#define PCI_DEVICE_ID_SURECOM_NE34	0x0e34
++
++#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
++#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV       0x0005
++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS   0x0083
++
++#define PCI_VENDOR_ID_ASP		0x10cd
++#define PCI_DEVICE_ID_ASP_ABP940	0x1200
++#define PCI_DEVICE_ID_ASP_ABP940U	0x1300
++#define PCI_DEVICE_ID_ASP_ABP940UW	0x2300
++
++#define PCI_VENDOR_ID_MACRONIX		0x10d9
++#define PCI_DEVICE_ID_MACRONIX_MX98713	0x0512
++#define PCI_DEVICE_ID_MX987x3		0x0512
++#define PCI_DEVICE_ID_MACRONIX_MX987x5	0x0531
++#define PCI_DEVICE_ID_MX987x5		0x0531
++
++#define PCI_VENDOR_ID_TCONRAD		0x10da
++#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
++
++#define PCI_VENDOR_ID_CERN		0x10dc
++#define PCI_DEVICE_ID_CERN_SPSB_PMC	0x0001
++#define PCI_DEVICE_ID_CERN_SPSB_PCI	0x0002
++#define PCI_DEVICE_ID_CERN_HIPPI_DST	0x0021
++#define PCI_DEVICE_ID_CERN_HIPPI_SRC	0x0022
++
++#define PCI_VENDOR_ID_NVIDIA			0x10de
++#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
++#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
++#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
++#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
++#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
++#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
++#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
++#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
++#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
++
++#define PCI_VENDOR_ID_IMS		0x10e0
++#define PCI_DEVICE_ID_IMS_8849		0x8849
++#define PCI_DEVICE_ID_IMS_TT128		0x9128
++#define PCI_DEVICE_ID_IMS_TT3D		0x9135
++
++#define PCI_VENDOR_ID_TEKRAM2		0x10e1
++#define PCI_DEVICE_ID_TEKRAM2_690c	0x690c
++
++#define PCI_VENDOR_ID_TUNDRA		0x10e3
++#define PCI_DEVICE_ID_TUNDRA_CA91C042	0x0000
++
++#define PCI_VENDOR_ID_AMCC		0x10e8
++#define PCI_DEVICE_ID_AMCC_MYRINET	0x8043
++#define PCI_DEVICE_ID_AMCC_PARASTATION	0x8062
++#define PCI_DEVICE_ID_AMCC_S5933	0x807d
++#define PCI_DEVICE_ID_AMCC_S5933_HEPC3	0x809c
++
++#define PCI_VENDOR_ID_INTERG		0x10ea
++#define PCI_DEVICE_ID_INTERG_1680	0x1680
++#define PCI_DEVICE_ID_INTERG_1682	0x1682
++#define PCI_DEVICE_ID_INTERG_2000	0x2000
++#define PCI_DEVICE_ID_INTERG_2010	0x2010
++#define PCI_DEVICE_ID_INTERG_5000	0x5000
++#define PCI_DEVICE_ID_INTERG_5050	0x5050
++
++#define PCI_VENDOR_ID_REALTEK		0x10ec
++#define PCI_DEVICE_ID_REALTEK_8029	0x8029
++#define PCI_DEVICE_ID_REALTEK_8129	0x8129
++#define PCI_DEVICE_ID_REALTEK_8139	0x8139
++
++#define PCI_VENDOR_ID_XILINX		0x10ee
++#define PCI_DEVICE_ID_TURBOPAM		0x4020
++
++#define PCI_VENDOR_ID_TRUEVISION	0x10fa
++#define PCI_DEVICE_ID_TRUEVISION_T1000	0x000c
++
++#define PCI_VENDOR_ID_INIT		0x1101
++#define PCI_DEVICE_ID_INIT_320P		0x9100
++#define PCI_DEVICE_ID_INIT_360P		0x9500
++
++#define PCI_VENDOR_ID_CREATIVE		0x1102 // duplicate: ECTIVA
++#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
++
++#define PCI_VENDOR_ID_ECTIVA		0x1102 // duplicate: CREATIVE
++#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
++
++#define PCI_VENDOR_ID_TTI		0x1103
++#define PCI_DEVICE_ID_TTI_HPT343	0x0003
++#define PCI_DEVICE_ID_TTI_HPT366	0x0004
++
++#define PCI_VENDOR_ID_VIA		0x1106
++#define PCI_VENDOR_ID_VIATEC		0x1106
++#define PCI_DEVICE_ID_VIA_8363_0	0x0305
++#define PCI_DEVICE_ID_VIA_8371_0	0x0391
++#define PCI_DEVICE_ID_VIA_8501_0	0x0501
++#define PCI_DEVICE_ID_VIA_82C505	0x0505
++#define PCI_DEVICE_ID_VIA_82C561	0x0561
++#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
++#define PCI_DEVICE_ID_VIA_82C576	0x0576
++#define PCI_DEVICE_ID_VIA_82C585	0x0585
++#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
++#define PCI_DEVICE_ID_VIA_82C595	0x0595
++#define PCI_DEVICE_ID_VIA_82C596	0x0596
++#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
++#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
++#define PCI_DEVICE_ID_VIA_8601_0	0x0601
++#define PCI_DEVICE_ID_VIA_8605_0	0x0605
++#define PCI_DEVICE_ID_VIA_82C680	0x0680
++#define PCI_DEVICE_ID_VIA_82C686	0x0686
++#define PCI_DEVICE_ID_VIA_82C691	0x0691
++#define PCI_DEVICE_ID_VIA_82C693	0x0693
++#define PCI_DEVICE_ID_VIA_82C693_1	0x0698
++#define PCI_DEVICE_ID_VIA_82C926	0x0926
++#define PCI_DEVICE_ID_VIA_82C576_1	0x1571
++#define PCI_DEVICE_ID_VIA_82C595_97	0x1595
++#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
++#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
++#define PCI_DEVICE_ID_VIA_RHINE_I	0x3043
++#define PCI_DEVICE_ID_VIA_6305		0x3044
++#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
++#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
++#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
++#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
++#define PCI_DEVICE_ID_VIA_8233_5	0x3059
++#define PCI_DEVICE_ID_VIA_8233_7	0x3065
++#define PCI_DEVICE_ID_VIA_VT6102	0x3065
++#define PCI_DEVICE_ID_VIA_82C686_6	0x3068
++#define PCI_DEVICE_ID_VIA_8233_0	0x3074
++#define PCI_DEVICE_ID_VIA_VT6105	0x3106
++#define PCI_DEVICE_ID_VIA_8233C_0	0x3109
++#define PCI_DEVICE_ID_VIA_8633_0	0x3091
++#define PCI_DEVICE_ID_VIA_8367_0	0x3099
++#define PCI_DEVICE_ID_VIA_86C100A	0x6100
++#define PCI_DEVICE_ID_VIA_8231		0x8231
++#define PCI_DEVICE_ID_VIA_8231_4	0x8235
++#define PCI_DEVICE_ID_VIA_8365_1	0x8305
++#define PCI_DEVICE_ID_VIA_8371_1	0x8391
++#define PCI_DEVICE_ID_VIA_8501_1	0x8501
++#define PCI_DEVICE_ID_VIA_82C597_1	0x8597
++#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
++#define PCI_DEVICE_ID_VIA_8601_1	0x8601
++#define PCI_DEVICE_ID_VIA_8505_1	0X8605
++#define PCI_DEVICE_ID_VIA_8633_1	0xB091
++#define PCI_DEVICE_ID_VIA_8367_1	0xB099
++
++#define PCI_VENDOR_ID_SIEMENS           0x110A
++#define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
++
++#define PCI_VENDOR_ID_SMC2		0x1113
++#define PCI_DEVICE_ID_SMC2_1211TX	0x1211
++#define PCI_DEVICE_ID_SMC2_1211         0x1211
++#define PCI_DEVICE_ID_SMC2_1216         0x1216
++
++#define PCI_VENDOR_ID_VORTEX		0x1119
++#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
++#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
++#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
++#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
++#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
++#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
++#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
++#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
++#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
++#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
++#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
++#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
++#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
++#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
++#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
++#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
++#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
++#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
++#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
++#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
++#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1	0x0110
++#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1	0x0111
++#define PCI_DEVICE_ID_VORTEX_GDT6537RP1	0x0112
++#define PCI_DEVICE_ID_VORTEX_GDT6557RP1	0x0113
++#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1	0x0114
++#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1	0x0115
++#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2	0x0120
++#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2	0x0121
++#define PCI_DEVICE_ID_VORTEX_GDT6537RP2	0x0122
++#define PCI_DEVICE_ID_VORTEX_GDT6557RP2	0x0123
++#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2	0x0124
++#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2	0x0125
++
++#define PCI_VENDOR_ID_EF		0x111a
++#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
++#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
++
++#define PCI_VENDOR_ID_IDT		0x111d
++#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
++
++#define PCI_VENDOR_ID_FORE		0x1127
++#define PCI_DEVICE_ID_FORE_PCA200PC	0x0210
++#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
++
++#define PCI_VENDOR_ID_IMAGINGTECH	0x112f
++#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI	0x0000
++
++#define PCI_VENDOR_ID_PHILIPS		0x1131
++#define PCI_DEVICE_ID_PHILIPS_SAA7145	0x7145
++#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
++#define PCI_DEVICE_ID_PHILIPS_SAA9730	0x9730
++
++#define PCI_VENDOR_ID_EICON		0x1133
++#define PCI_DEVICE_ID_EICON_DIVA20PRO	0xe001
++#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
++#define PCI_DEVICE_ID_EICON_DIVA20PRO_U	0xe003
++#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
++#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
++#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
++#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
++#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
++#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
++ 
++#define PCI_VENDOR_ID_CYCLONE		0x113c
++#define PCI_DEVICE_ID_CYCLONE_SDK	0x0001
++
++#define PCI_VENDOR_ID_ALLIANCE		0x1142
++#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO	0x3210
++#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO	0x6422
++#define PCI_DEVICE_ID_ALLIANCE_AT24	0x6424
++#define PCI_DEVICE_ID_ALLIANCE_AT3D	0x643d
++
++#define PCI_VENDOR_ID_SYSKONNECT	0x1148
++#define PCI_DEVICE_ID_SYSKONNECT_FP	0x4000
++#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
++#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
++
++#define PCI_VENDOR_ID_VMIC		0x114a
++#define PCI_DEVICE_ID_VMIC_VME		0x7587
++
++#define PCI_VENDOR_ID_DIGI		0x114f
++#define PCI_DEVICE_ID_DIGI_EPC		0x0002
++#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH	0x0003
++#define PCI_DEVICE_ID_DIGI_XEM		0x0004
++#define PCI_DEVICE_ID_DIGI_XR		0x0005
++#define PCI_DEVICE_ID_DIGI_CX		0x0006
++#define PCI_DEVICE_ID_DIGI_XRJ		0x0009
++#define PCI_DEVICE_ID_DIGI_EPCJ		0x000a
++#define PCI_DEVICE_ID_DIGI_XR_920	0x0027
++#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
++#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
++#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
++#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
++
++#define PCI_VENDOR_ID_MUTECH		0x1159
++#define PCI_DEVICE_ID_MUTECH_MV1000	0x0001
++
++#define PCI_VENDOR_ID_XIRCOM		0x115d
++#define PCI_DEVICE_ID_XIRCOM_X3201_ETH	0x0003
++#define PCI_DEVICE_ID_XIRCOM_X3201_MDM	0x0103
++
++#define PCI_VENDOR_ID_RENDITION		0x1163
++#define PCI_DEVICE_ID_RENDITION_VERITE	0x0001
++#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
++
++#define PCI_VENDOR_ID_SERVERWORKS	  0x1166
++#define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
++#define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
++#define PCI_DEVICE_ID_SERVERWORKS_CIOB30  0x0010
++#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011
++#define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
++#define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
++#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
++#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
++#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
++#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB
++#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
++
++#define PCI_VENDOR_ID_SBE		0x1176
++#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
++#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
++#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
++
++#define PCI_VENDOR_ID_TOSHIBA		0x1179
++#define PCI_DEVICE_ID_TOSHIBA_601	0x0601
++#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
++#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
++
++#define PCI_VENDOR_ID_RICOH		0x1180
++#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
++#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
++#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
++#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
++#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
++
++#define	PCI_VENDOR_ID_DLINK		0x1186
++#define	PCI_DEVICE_ID_DFE530TXP		0x1300
++#define PCI_DEVICE_ID_DFE530TXS		0x1002
++
++#define PCI_VENDOR_ID_ARTOP		0x1191
++#define PCI_DEVICE_ID_ARTOP_ATP8400	0x0004
++#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
++#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
++#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
++#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
++#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
++#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
++#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
++#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
++#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
++#define PCI_DEVICE_ID_ARTOP_8060	0x8060
++
++#define PCI_VENDOR_ID_ZEITNET		0x1193
++#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
++#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
++
++#define PCI_VENDOR_ID_OMEGA		0x119b
++#define PCI_DEVICE_ID_OMEGA_82C092G	0x1221
++
++#define PCI_VENDOR_ID_FUJITSU_ME	0x119e
++#define PCI_DEVICE_ID_FUJITSU_FS155	0x0001
++#define PCI_DEVICE_ID_FUJITSU_FS50	0x0003
++
++#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
++#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
++
++#define PCI_VENDOR_ID_GALILEO		0x11ab
++#define PCI_DEVICE_ID_GALILEO_GT64011	0x4146
++#define PCI_DEVICE_ID_GALILEO_GT64111	0x4146
++#define PCI_DEVICE_ID_GALILEO_GT96100	0x9652
++#define PCI_DEVICE_ID_GALILEO_GT96100A	0x9653
++
++#define PCI_VENDOR_ID_LINKSYS		0x11ad
++#define PCI_VENDOR_ID_LITEON		0x11ad
++#define PCI_DEVICE_ID_LITEON_LNE100TX	0x0002
++#define PCI_DEVICE_ID_LC82C115		0xC115
++
++#define PCI_VENDOR_ID_V3		0x11b0
++#define PCI_DEVICE_ID_V3_V960		0x0001
++#define PCI_DEVICE_ID_V3_V350		0x0001
++#define PCI_DEVICE_ID_V3_V961		0x0002
++#define PCI_DEVICE_ID_V3_V351		0x0002
++
++#define PCI_VENDOR_ID_NP		0x11bc
++#define PCI_DEVICE_ID_NP_PCI_FDDI	0x0001
++
++#define PCI_VENDOR_ID_ATT		0x11c1
++#define PCI_DEVICE_ID_ATT_L56XMF	0x0440
++#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
++
++#define PCI_VENDOR_ID_SPECIALIX		0x11cb
++#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
++#define PCI_DEVICE_ID_SPECIALIX_XIO	0x4000
++#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
++#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
++
++#define PCI_VENDOR_ID_AURAVISION	0x11d1
++#define PCI_DEVICE_ID_AURAVISION_VXP524	0x01f7
++
++#define PCI_VENDOR_ID_ANALOG_DEVICES	0x11d4
++#define PCI_DEVICE_ID_AD1889JS		0x1889
++
++#define PCI_VENDOR_ID_IKON		0x11d5
++#define PCI_DEVICE_ID_IKON_10115	0x0115
++#define PCI_DEVICE_ID_IKON_10117	0x0117
++
++#define PCI_VENDOR_ID_ZORAN		0x11de
++#define PCI_DEVICE_ID_ZORAN_36057	0x6057
++#define PCI_DEVICE_ID_ZORAN_36120	0x6120
++
++#define PCI_VENDOR_ID_KINETIC		0x11f4
++#define PCI_DEVICE_ID_KINETIC_2915	0x2915
++
++#define PCI_VENDOR_ID_COMPEX		0x11f6
++#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
++#define PCI_DEVICE_ID_COMPEX_RL2000	0x1401
++#define PCI_DEVICE_ID_COMPEX_RL100ATX   0x2011
++
++#define PCI_VENDOR_ID_RP		0x11fe
++#define PCI_DEVICE_ID_RP32INTF		0x0001
++#define PCI_DEVICE_ID_RP8INTF		0x0002
++#define PCI_DEVICE_ID_RP16INTF		0x0003
++#define PCI_DEVICE_ID_RP4QUAD		0x0004
++#define PCI_DEVICE_ID_RP8OCTA		0x0005
++#define PCI_DEVICE_ID_RP8J		0x0006
++#define PCI_DEVICE_ID_RPP4		0x000A
++#define PCI_DEVICE_ID_RPP8		0x000B
++#define PCI_DEVICE_ID_RP8M		0x000C
++
++#define PCI_VENDOR_ID_CYCLADES		0x120e
++#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
++#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
++#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
++#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
++#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
++#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
++#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
++#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
++#define PCI_DEVICE_ID_PC300_RX_2	0x0300
++#define PCI_DEVICE_ID_PC300_RX_1	0x0301
++#define PCI_DEVICE_ID_PC300_TE_2	0x0310
++#define PCI_DEVICE_ID_PC300_TE_1	0x0311
++
++#define PCI_VENDOR_ID_ESSENTIAL		0x120f
++#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
++
++#define PCI_VENDOR_ID_O2		0x1217
++#define PCI_DEVICE_ID_O2_6729		0x6729
++#define PCI_DEVICE_ID_O2_6730		0x673a
++#define PCI_DEVICE_ID_O2_6832		0x6832
++#define PCI_DEVICE_ID_O2_6836		0x6836
++
++#define PCI_VENDOR_ID_3DFX		0x121a
++#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
++#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
++#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
++#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
++
++#define PCI_VENDOR_ID_SIGMADES		0x1236
++#define PCI_DEVICE_ID_SIGMADES_6425	0x6401
++
++#define PCI_VENDOR_ID_CCUBE		0x123f
++
++#define PCI_VENDOR_ID_AVM		0x1244
++#define PCI_DEVICE_ID_AVM_B1		0x0700
++#define PCI_DEVICE_ID_AVM_C4		0x0800
++#define PCI_DEVICE_ID_AVM_A1		0x0a00
++#define PCI_DEVICE_ID_AVM_A1_V2		0x0e00
++#define PCI_DEVICE_ID_AVM_C2		0x1100
++#define PCI_DEVICE_ID_AVM_T1		0x1200
++
++#define PCI_VENDOR_ID_DIPIX		0x1246
++
++#define PCI_VENDOR_ID_STALLION		0x124d
++#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
++#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
++#define PCI_DEVICE_ID_STALLION_EIOPCI	0x0003
++
++#define PCI_VENDOR_ID_OPTIBASE		0x1255
++#define PCI_DEVICE_ID_OPTIBASE_FORGE	0x1110
++#define PCI_DEVICE_ID_OPTIBASE_FUSION	0x1210
++#define PCI_DEVICE_ID_OPTIBASE_VPLEX	0x2110
++#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC	0x2120
++#define PCI_DEVICE_ID_OPTIBASE_VQUEST	0x2130
++
++#define PCI_VENDOR_ID_ESS		0x125d
++#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
++#define PCI_DEVICE_ID_ESS_AUDIOPCI	0x1969
++#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
++
++#define PCI_VENDOR_ID_HARRIS        	0x1260
++#define PCI_DEVICE_ID_HARRIS_PRISM2	0x3873
++
++#define PCI_VENDOR_ID_SATSAGEM		0x1267
++#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
++#define PCI_DEVICE_ID_SATSAGEM_PCR2101	0x5352
++#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
++
++#define PCI_VENDOR_ID_HUGHES		0x1273
++#define PCI_DEVICE_ID_HUGHES_DIRECPC	0x0002
++
++#define PCI_VENDOR_ID_ENSONIQ		0x1274
++#define PCI_DEVICE_ID_ENSONIQ_CT5880	0x5880
++#define PCI_DEVICE_ID_ENSONIQ_ES1370	0x5000
++#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
++
++#define PCI_VENDOR_ID_ROCKWELL		0x127A
++
++#define PCI_VENDOR_ID_DAVICOM		0x1282
++#define	PCI_DEVICE_ID_DM9009		0x9009
++#define PCI_DEVICE_ID_DM9102		0x9102
++
++#define PCI_VENDOR_ID_ITE		0x1283
++#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
++#define PCI_DEVICE_ID_ITE_IT8172G	0x8172
++#define PCI_DEVICE_ID_ITE_8872		0x8872
++
++
++/* formerly Platform Tech */
++#define PCI_VENDOR_ID_ESS_OLD		0x1285
++#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
++
++#define PCI_VENDOR_ID_ALTEON		0x12ae
++#define PCI_DEVICE_ID_ALTEON_ACENIC	0x0001
++
++#define PCI_VENDOR_ID_USR		0x12B9
++
++#define	PCI_VENDOR_ID_HOLTEK		0x12c3
++#define	PCI_DEVICE_ID_HOLTEK_HT80232	0x0058
++
++#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
++
++#define PCI_VENDOR_ID_PICTUREL		0x12c5
++#define PCI_DEVICE_ID_PICTUREL_PCIVST	0x0081
++
++#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
++#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
++
++#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
++#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
++#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
++#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
++
++#define PCI_VENDOR_ID_AUREAL		0x12eb
++#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
++#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
++
++#define PCI_VENDOR_ID_CBOARDS		0x1307
++#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
++
++#define PCI_VENDOR_ID_SIIG		0x131f
++#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
++#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
++#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
++#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
++#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
++#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
++#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
++#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
++#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
++#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
++#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
++#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
++#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
++#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
++#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
++#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
++#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
++#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
++#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
++#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
++#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
++#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
++#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
++#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
++#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
++#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
++#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
++#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
++#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
++#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
++#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
++#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
++#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
++#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
++#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
++#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
++#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
++
++#define PCI_VENDOR_ID_ADMTEK            0x1317
++#define PCI_DEVICE_ID_ADMTEK_0985       0x0985
++
++#define PCI_VENDOR_ID_DOMEX		0x134a
++#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
++
++#define PCI_VENDOR_ID_QUATECH		0x135C
++#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
++#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
++#define PCI_DEVICE_ID_QUATECH_DSC200	0x0030
++#define PCI_DEVICE_ID_QUATECH_QSC200	0x0040
++#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
++#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
++
++#define PCI_VENDOR_ID_SEALEVEL		0x135e
++#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
++#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
++#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
++#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
++#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
++#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
++
++#define PCI_VENDOR_ID_HYPERCOPE		0x1365
++#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
++#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
++#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
++#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
++#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
++#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS	0x0109
++
++#define PCI_VENDOR_ID_KAWASAKI		0x136b
++#define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
++
++#define PCI_VENDOR_ID_LMC		0x1376
++#define PCI_DEVICE_ID_LMC_HSSI		0x0003
++#define PCI_DEVICE_ID_LMC_DS3		0x0004
++#define PCI_DEVICE_ID_LMC_SSI		0x0005
++#define PCI_DEVICE_ID_LMC_T1		0x0006
++
++#define PCI_VENDOR_ID_NETGEAR		0x1385
++#define PCI_DEVICE_ID_NETGEAR_MA301	0x4100
++#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
++#define PCI_DEVICE_ID_NETGEAR_GA622	0x622a
++
++#define PCI_VENDOR_ID_APPLICOM		0x1389
++#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
++#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
++#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
++
++#define PCI_VENDOR_ID_MOXA		0x1393
++#define PCI_DEVICE_ID_MOXA_C104		0x1040
++#define PCI_DEVICE_ID_MOXA_C168		0x1680
++#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
++#define PCI_DEVICE_ID_MOXA_C218		0x2180
++#define PCI_DEVICE_ID_MOXA_C320		0x3200
++
++#define PCI_VENDOR_ID_CCD		0x1397
++#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
++#define PCI_DEVICE_ID_CCD_B000		0xb000
++#define PCI_DEVICE_ID_CCD_B006		0xb006
++#define PCI_DEVICE_ID_CCD_B007		0xb007
++#define PCI_DEVICE_ID_CCD_B008		0xb008
++#define PCI_DEVICE_ID_CCD_B009		0xb009
++#define PCI_DEVICE_ID_CCD_B00A		0xb00a
++#define PCI_DEVICE_ID_CCD_B00B		0xb00b
++#define PCI_DEVICE_ID_CCD_B00C		0xb00c
++#define PCI_DEVICE_ID_CCD_B100		0xb100
++
++#define PCI_VENDOR_ID_MICROGATE		0x13c0
++#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
++#define PCI_DEVICE_ID_MICROGATE_SCC	0x0020
++#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
++
++#define PCI_VENDOR_ID_3WARE		0x13C1
++#define PCI_DEVICE_ID_3WARE_1000	0x1000
++
++#define PCI_VENDOR_ID_ABOCOM		0x13D1
++#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
++
++#define PCI_VENDOR_ID_CMEDIA		0x13f6
++#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
++#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
++#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
++#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
++
++#define PCI_VENDOR_ID_LAVA		0x1407
++#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
++#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
++#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
++#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
++#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
++#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
++#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
++#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
++#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
++#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
++#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
++#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
++
++#define PCI_VENDOR_ID_TIMEDIA		0x1409
++#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
++
++#define PCI_VENDOR_ID_OXSEMI		0x1415
++#define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
++#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
++#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x950A
++#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
++#define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
++
++#define PCI_VENDOR_ID_AIRONET		0x14b9
++#define PCI_DEVICE_ID_AIRONET_4800_1	0x0001
++#define PCI_DEVICE_ID_AIRONET_4800	0x4500 // values switched?  see
++#define PCI_DEVICE_ID_AIRONET_4500	0x4800 // drivers/net/aironet4500_card.c
++
++#define PCI_VENDOR_ID_TITAN		0x14D2
++#define PCI_DEVICE_ID_TITAN_010L	0x8001
++#define PCI_DEVICE_ID_TITAN_100L	0x8010
++#define PCI_DEVICE_ID_TITAN_110L	0x8011
++#define PCI_DEVICE_ID_TITAN_200L	0x8020
++#define PCI_DEVICE_ID_TITAN_210L	0x8021
++#define PCI_DEVICE_ID_TITAN_400L	0x8040
++#define PCI_DEVICE_ID_TITAN_800L	0x8080
++#define PCI_DEVICE_ID_TITAN_100		0xA001
++#define PCI_DEVICE_ID_TITAN_200		0xA005
++#define PCI_DEVICE_ID_TITAN_400		0xA003
++#define PCI_DEVICE_ID_TITAN_800B	0xA004
++
++#define PCI_VENDOR_ID_PANACOM		0x14d4
++#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
++#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
++
++#define PCI_VENDOR_ID_BROADCOM		0x14e4
++#define PCI_DEVICE_ID_TIGON3_5700	0x1644
++#define PCI_DEVICE_ID_TIGON3_5701	0x1645
++#define PCI_DEVICE_ID_TIGON3_5702	0x1646
++#define PCI_DEVICE_ID_TIGON3_5703	0x1647
++#define PCI_DEVICE_ID_TIGON3_5704	0x1648
++#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
++#define PCI_DEVICE_ID_TIGON3_5705	0x1653
++#define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
++#define PCI_DEVICE_ID_TIGON3_5705M	0x165d
++#define PCI_DEVICE_ID_TIGON3_5705M_2	0x165e
++#define PCI_DEVICE_ID_TIGON3_5782	0x1696
++#define PCI_DEVICE_ID_TIGON3_5788	0x169c
++#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
++#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
++#define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
++#define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
++#define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
++#define PCI_DEVICE_ID_TIGON3_5901	0x170d
++#define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
++
++#define PCI_VENDOR_ID_SYBA		0x1592
++#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
++#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
++
++#define PCI_VENDOR_ID_MORETON		0x15aa
++#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
++
++#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
++#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0 
++
++#define PCI_VENDOR_ID_PDC		0x15e9
++#define PCI_DEVICE_ID_PDC_1841		0x1841
++
++#define PCI_VENDOR_ID_SYMPHONY		0x1c1c
++#define PCI_DEVICE_ID_SYMPHONY_101	0x0001
++
++#define PCI_VENDOR_ID_TEKRAM		0x1de1
++#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
++
++#define PCI_VENDOR_ID_3DLABS		0x3d3d
++#define PCI_DEVICE_ID_3DLABS_300SX	0x0001
++#define PCI_DEVICE_ID_3DLABS_500TX	0x0002
++#define PCI_DEVICE_ID_3DLABS_DELTA	0x0003
++#define PCI_DEVICE_ID_3DLABS_PERMEDIA	0x0004
++#define PCI_DEVICE_ID_3DLABS_MX		0x0006
++#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
++#define PCI_DEVICE_ID_3DLABS_GAMMA	0x0008
++#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
++
++#define PCI_VENDOR_ID_AVANCE		0x4005
++#define PCI_DEVICE_ID_AVANCE_ALG2064	0x2064
++#define PCI_DEVICE_ID_AVANCE_2302	0x2302
++
++#define PCI_VENDOR_ID_AKS		0x416c
++#define PCI_DEVICE_ID_AKS_ALADDINCARD	0x0100
++#define PCI_DEVICE_ID_AKS_CPC		0x0200
++
++#define PCI_VENDOR_ID_NETVIN		0x4a14
++#define PCI_DEVICE_ID_NETVIN_NV5000SC	0x5000
++
++#define PCI_VENDOR_ID_S3		0x5333
++#define PCI_DEVICE_ID_S3_PLATO_PXS	0x0551
++#define PCI_DEVICE_ID_S3_ViRGE		0x5631
++#define PCI_DEVICE_ID_S3_TRIO		0x8811
++#define PCI_DEVICE_ID_S3_AURORA64VP	0x8812
++#define PCI_DEVICE_ID_S3_TRIO64UVP	0x8814
++#define PCI_DEVICE_ID_S3_ViRGE_VX	0x883d
++#define PCI_DEVICE_ID_S3_868		0x8880
++#define PCI_DEVICE_ID_S3_928		0x88b0
++#define PCI_DEVICE_ID_S3_864_1		0x88c0
++#define PCI_DEVICE_ID_S3_864_2		0x88c1
++#define PCI_DEVICE_ID_S3_964_1		0x88d0
++#define PCI_DEVICE_ID_S3_964_2		0x88d1
++#define PCI_DEVICE_ID_S3_968		0x88f0
++#define PCI_DEVICE_ID_S3_TRIO64V2	0x8901
++#define PCI_DEVICE_ID_S3_PLATO_PXG	0x8902
++#define PCI_DEVICE_ID_S3_ViRGE_DXGX	0x8a01
++#define PCI_DEVICE_ID_S3_ViRGE_GX2	0x8a10
++#define PCI_DEVICE_ID_S3_ViRGE_MX	0x8c01
++#define PCI_DEVICE_ID_S3_ViRGE_MXP	0x8c02
++#define PCI_DEVICE_ID_S3_ViRGE_MXPMV	0x8c03
++#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
++
++#define PCI_VENDOR_ID_DCI		0x6666
++#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
++#define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
++
++#define PCI_VENDOR_ID_GENROCO		0x5555
++#define PCI_DEVICE_ID_GENROCO_HFP832	0x0003
++
++#define PCI_VENDOR_ID_INTEL		0x8086
++#define PCI_DEVICE_ID_INTEL_21145	0x0039
++#define PCI_DEVICE_ID_INTEL_82375	0x0482
++#define PCI_DEVICE_ID_INTEL_82424	0x0483
++#define PCI_DEVICE_ID_INTEL_82378	0x0484
++#define PCI_DEVICE_ID_INTEL_82430	0x0486
++#define PCI_DEVICE_ID_INTEL_82434	0x04a3
++#define PCI_DEVICE_ID_INTEL_I960	0x0960
++#define PCI_DEVICE_ID_INTEL_82542       	0x1000
++#define PCI_DEVICE_ID_INTEL_82543GC_FIBER  	0x1001
++#define PCI_DEVICE_ID_INTEL_82543GC_COPPER 	0x1004
++#define PCI_DEVICE_ID_INTEL_82544EI_COPPER 	0x1008
++#define PCI_DEVICE_ID_INTEL_82544EI_FIBER 	0x1009
++#define PCI_DEVICE_ID_INTEL_82544GC_COPPER 	0x100C
++#define PCI_DEVICE_ID_INTEL_82544GC_LOM   	0x100D
++#define PCI_DEVICE_ID_INTEL_82540EM		0x100E
++#define PCI_DEVICE_ID_INTEL_82545EM_COPPER	0x100F
++#define PCI_DEVICE_ID_INTEL_82546EB_COPPER	0x1010
++#define PCI_DEVICE_ID_INTEL_82545EM_FIBER	0x1011
++#define PCI_DEVICE_ID_INTEL_82546EB_FIBER	0x1012
++#define PCI_DEVICE_ID_INTEL_82540EM_LOM		0x1015
++#define PCI_DEVICE_ID_INTEL_ID1029	0x1029
++#define PCI_DEVICE_ID_INTEL_ID1030	0x1030
++#define PCI_DEVICE_ID_INTEL_ID1031	0x1031
++#define PCI_DEVICE_ID_INTEL_ID1038	0x1038
++#define PCI_DEVICE_ID_INTEL_ID1039	0x1039
++#define PCI_DEVICE_ID_INTEL_ID103A	0x103A
++#define PCI_DEVICE_ID_INTEL_82562ET	0x1031
++#define PCI_DEVICE_ID_INTEL_82559ER	0x1209
++#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
++#define PCI_DEVICE_ID_INTEL_82092AA_1	0x1222
++#define PCI_DEVICE_ID_INTEL_7116	0x1223
++#define PCI_DEVICE_ID_INTEL_82596	0x1226
++#define PCI_DEVICE_ID_INTEL_82865	0x1227
++#define PCI_DEVICE_ID_INTEL_82557	0x1229
++#define PCI_DEVICE_ID_INTEL_82437	0x122d
++#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
++#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
++#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
++#define PCI_DEVICE_ID_INTEL_82437MX	0x1235
++#define PCI_DEVICE_ID_INTEL_82441	0x1237
++#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
++#define PCI_DEVICE_ID_INTEL_82439	0x1250
++#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
++#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
++#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
++#define PCI_DEVICE_ID_INTEL_82801AA_2	0x2412
++#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
++#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
++#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
++#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
++#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
++#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
++#define PCI_DEVICE_ID_INTEL_82801AB_2	0x2422
++#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
++#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
++#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
++#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
++#define PCI_DEVICE_ID_INTEL_82801BA_0	0x2440
++#define PCI_DEVICE_ID_INTEL_82801BA_1	0x2442
++#define PCI_DEVICE_ID_INTEL_82801BA_2	0x2443
++#define PCI_DEVICE_ID_INTEL_82801BA_3	0x2444
++#define PCI_DEVICE_ID_INTEL_82801BA_4	0x2445
++#define PCI_DEVICE_ID_INTEL_82801BA_5	0x2446
++#define PCI_DEVICE_ID_INTEL_82801BA_6	0x2448
++#define PCI_DEVICE_ID_INTEL_82801BA_7	0x2449
++#define PCI_DEVICE_ID_INTEL_82562	0x2449
++#define PCI_DEVICE_ID_INTEL_82801BA_8	0x244a
++#define PCI_DEVICE_ID_INTEL_82801BA_9	0x244b
++#define PCI_DEVICE_ID_INTEL_82801BA_10	0x244c
++#define PCI_DEVICE_ID_INTEL_82801BA_11	0x244e
++#define PCI_DEVICE_ID_INTEL_82801CA_0	0x2480
++#define PCI_DEVICE_ID_INTEL_82801CA_2	0x2482
++#define PCI_DEVICE_ID_INTEL_82801CA_3	0x2483
++#define PCI_DEVICE_ID_INTEL_82801CA_4	0x2484
++#define PCI_DEVICE_ID_INTEL_82801CA_5	0x2485
++#define PCI_DEVICE_ID_INTEL_82801CA_6	0x2486
++#define PCI_DEVICE_ID_INTEL_82801CA_7	0x2487
++#define PCI_DEVICE_ID_INTEL_82801CA_10	0x248a
++#define PCI_DEVICE_ID_INTEL_82801CA_11	0x248b
++#define PCI_DEVICE_ID_INTEL_82801CA_12	0x248c
++#define PCI_DEVICE_ID_INTEL_80310	0x530d
++#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
++#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
++#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
++#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
++#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
++#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
++#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
++#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
++#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
++#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
++#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
++#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
++#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
++#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
++#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
++#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
++#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
++#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
++#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
++#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
++#define PCI_DEVICE_ID_INTEL_82443MX_2	0x719a
++#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
++#define PCI_DEVICE_ID_INTEL_82372FB_0	0x7600
++#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
++#define PCI_DEVICE_ID_INTEL_82372FB_2	0x7602
++#define PCI_DEVICE_ID_INTEL_82372FB_3	0x7603
++#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
++#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
++#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
++
++#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
++#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
++#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
++#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
++#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
++#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
++#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
++
++#define PCI_VENDOR_ID_KTI		0x8e2e
++#define PCI_DEVICE_ID_KTI_ET32P2	0x3000
++
++#define PCI_VENDOR_ID_ADAPTEC		0x9004
++#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
++#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
++#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
++#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
++#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
++#define PCI_DEVICE_ID_ADAPTEC_5800	0x5800
++#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
++#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
++#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
++#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
++#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
++#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
++#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
++#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
++#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
++#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
++#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
++#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
++#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
++#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
++#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
++#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
++#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
++#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
++#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
++#define PCI_DEVICE_ID_ADAPTEC_1030	0x8b78
++
++#define PCI_VENDOR_ID_ADAPTEC2		0x9005
++#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
++#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
++#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
++#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
++#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
++#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
++#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
++#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
++#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
++#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
++#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
++#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
++#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
++#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
++#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
++
++#define PCI_VENDOR_ID_ATRONICS		0x907f
++#define PCI_DEVICE_ID_ATRONICS_2015	0x2015
++
++#define PCI_VENDOR_ID_HOLTEK2		0x9412
++#define PCI_DEVICE_ID_HOLTEK2_6565	0x6565
++
++#define PCI_VENDOR_ID_NETMOS		0x9710
++#define PCI_DEVICE_ID_NETMOS_9735	0x9735
++#define PCI_DEVICE_ID_NETMOS_9835	0x9835
++
++#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
++#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
++
++#define PCI_VENDOR_ID_TIGERJET		0xe159
++#define PCI_DEVICE_ID_TIGERJET_300	0x0001
++#define PCI_DEVICE_ID_TIGERJET_100	0x0002
++
++#define PCI_VENDOR_ID_ARK		0xedd8
++#define PCI_DEVICE_ID_ARK_STING		0xa091
++#define PCI_DEVICE_ID_ARK_STINGARK	0xa099
++#define PCI_DEVICE_ID_ARK_2000MT	0xa0a1
++
+diff -Naur grub-0.97.orig/netboot/pci_io.c grub-0.97/netboot/pci_io.c
+--- grub-0.97.orig/netboot/pci_io.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pci_io.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,431 @@
++/*
++** Support for NE2000 PCI clones added David Monro June 1997
++** Generalised to other NICs by Ken Yap July 1997
++**
++** Most of this is taken from:
++**
++** /usr/src/linux/drivers/pci/pci.c
++** /usr/src/linux/include/linux/pci.h
++** /usr/src/linux/arch/i386/bios32.c
++** /usr/src/linux/include/linux/bios32.h
++** /usr/src/linux/drivers/net/ne.c
++*/
++#define PCBIOS
++#include "grub.h"
++#include "pci.h"
++
++#ifdef	CONFIG_PCI_DIRECT
++#define  PCIBIOS_SUCCESSFUL                0x00
++
++#define DEBUG 0
++
++/*
++ * Functions for accessing PCI configuration space with type 1 accesses
++ */
++
++#define CONFIG_CMD(bus, device_fn, where)   (0x80000000 | (bus << 16) | (device_fn << 8) | (where & ~3))
++
++int pcibios_read_config_byte(unsigned int bus, unsigned int device_fn,
++			       unsigned int where, uint8_t *value)
++{
++    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
++    *value = inb(0xCFC + (where&3));
++    return PCIBIOS_SUCCESSFUL;
++}
++
++int pcibios_read_config_word (unsigned int bus,
++    unsigned int device_fn, unsigned int where, uint16_t *value)
++{
++    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
++    *value = inw(0xCFC + (where&2));
++    return PCIBIOS_SUCCESSFUL;
++}
++
++int pcibios_read_config_dword (unsigned int bus, unsigned int device_fn,
++				 unsigned int where, uint32_t *value)
++{
++    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
++    *value = inl(0xCFC);
++    return PCIBIOS_SUCCESSFUL;
++}
++
++int pcibios_write_config_byte (unsigned int bus, unsigned int device_fn,
++				 unsigned int where, uint8_t value)
++{
++    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
++    outb(value, 0xCFC + (where&3));
++    return PCIBIOS_SUCCESSFUL;
++}
++
++int pcibios_write_config_word (unsigned int bus, unsigned int device_fn,
++				 unsigned int where, uint16_t value)
++{
++    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
++    outw(value, 0xCFC + (where&2));
++    return PCIBIOS_SUCCESSFUL;
++}
++
++int pcibios_write_config_dword (unsigned int bus, unsigned int device_fn, unsigned int where, uint32_t value)
++{
++    outl(CONFIG_CMD(bus,device_fn,where), 0xCF8);
++    outl(value, 0xCFC);
++    return PCIBIOS_SUCCESSFUL;
++}
++
++#undef CONFIG_CMD
++
++#else	 /* CONFIG_PCI_DIRECT  not defined */
++
++#if !defined(PCBIOS)
++#error "The pcibios can only be used when the PCBIOS support is compiled in"
++#endif
++
++
++#define KERN_CODE_SEG 0X8
++/* Stuff for asm */
++#define save_flags(x) \
++__asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */ :"memory")
++
++#define cli() __asm__ __volatile__ ("cli": : :"memory")
++
++#define restore_flags(x) \
++__asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory")
++
++
++
++static struct {
++	unsigned long address;
++	unsigned short segment;
++} bios32_indirect = { 0, KERN_CODE_SEG };
++
++static long pcibios_entry = 0;
++static struct {
++	unsigned long address;
++	unsigned short segment;
++} pci_indirect = { 0, KERN_CODE_SEG };
++
++static unsigned long bios32_service(unsigned long service)
++{
++	unsigned char return_code;	/* %al */
++	unsigned long address;		/* %ebx */
++	unsigned long length;		/* %ecx */
++	unsigned long entry;		/* %edx */
++	unsigned long flags;
++
++	save_flags(flags);
++	__asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%edi)"
++#else
++		"lcall *(%%edi)"
++#endif
++		: "=a" (return_code),
++		  "=b" (address),
++		  "=c" (length),
++		  "=d" (entry)
++		: "0" (service),
++		  "1" (0),
++		  "D" (&bios32_indirect));
++	restore_flags(flags);
++
++	switch (return_code) {
++		case 0:
++			return address + entry;
++		case 0x80:	/* Not present */
++			printf("bios32_service(%d) : not present\n", service);
++			return 0;
++		default: /* Shouldn't happen */
++			printf("bios32_service(%d) : returned %#X, mail drew@colorado.edu\n",
++				service, return_code);
++			return 0;
++	}
++}
++
++int pcibios_read_config_byte(unsigned int bus,
++        unsigned int device_fn, unsigned int where, uint8_t *value)
++{
++        unsigned long ret;
++        unsigned long bx = (bus << 8) | device_fn;
++        unsigned long flags;
++
++        save_flags(flags);
++        __asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%esi)\n\t"
++#else
++		"lcall *(%%esi)\n\t"
++#endif
++                "jc 1f\n\t"
++                "xor %%ah, %%ah\n"
++                "1:"
++                : "=c" (*value),
++                  "=a" (ret)
++                : "1" (PCIBIOS_READ_CONFIG_BYTE),
++                  "b" (bx),
++                  "D" ((long) where),
++                  "S" (&pci_indirect));
++        restore_flags(flags);
++        return (int) (ret & 0xff00) >> 8;
++}
++
++int pcibios_read_config_word(unsigned int bus,
++        unsigned int device_fn, unsigned int where, uint16_t *value)
++{
++        unsigned long ret;
++        unsigned long bx = (bus << 8) | device_fn;
++        unsigned long flags;
++
++        save_flags(flags);
++        __asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%esi)\n\t"
++#else
++		"lcall *(%%esi)\n\t"
++#endif
++                "jc 1f\n\t"
++                "xor %%ah, %%ah\n"
++                "1:"
++                : "=c" (*value),
++                  "=a" (ret)
++                : "1" (PCIBIOS_READ_CONFIG_WORD),
++                  "b" (bx),
++                  "D" ((long) where),
++                  "S" (&pci_indirect));
++        restore_flags(flags);
++        return (int) (ret & 0xff00) >> 8;
++}
++
++int pcibios_read_config_dword(unsigned int bus,
++        unsigned int device_fn, unsigned int where, uint32_t *value)
++{
++        unsigned long ret;
++        unsigned long bx = (bus << 8) | device_fn;
++        unsigned long flags;
++
++        save_flags(flags);
++        __asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%esi)\n\t"
++#else
++		"lcall *(%%esi)\n\t"
++#endif
++                "jc 1f\n\t"
++                "xor %%ah, %%ah\n"
++                "1:"
++                : "=c" (*value),
++                  "=a" (ret)
++                : "1" (PCIBIOS_READ_CONFIG_DWORD),
++                  "b" (bx),
++                  "D" ((long) where),
++                  "S" (&pci_indirect));
++        restore_flags(flags);
++        return (int) (ret & 0xff00) >> 8;
++}
++
++int pcibios_write_config_byte (unsigned int bus,
++	unsigned int device_fn, unsigned int where, uint8_t value)
++{
++	unsigned long ret;
++	unsigned long bx = (bus << 8) | device_fn;
++	unsigned long flags;
++
++	save_flags(flags); cli();
++	__asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%esi)\n\t"
++#else
++		"lcall *(%%esi)\n\t"
++#endif
++		"jc 1f\n\t"
++		"xor %%ah, %%ah\n"
++		"1:"
++		: "=a" (ret)
++		: "0" (PCIBIOS_WRITE_CONFIG_BYTE),
++		  "c" (value),
++		  "b" (bx),
++		  "D" ((long) where),
++		  "S" (&pci_indirect));
++	restore_flags(flags);
++	return (int) (ret & 0xff00) >> 8;
++}
++
++int pcibios_write_config_word (unsigned int bus,
++	unsigned int device_fn, unsigned int where, uint16_t value)
++{
++	unsigned long ret;
++	unsigned long bx = (bus << 8) | device_fn;
++	unsigned long flags;
++
++	save_flags(flags); cli();
++	__asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%esi)\n\t"
++#else
++		"lcall *(%%esi)\n\t"
++#endif
++		"jc 1f\n\t"
++		"xor %%ah, %%ah\n"
++		"1:"
++		: "=a" (ret)
++		: "0" (PCIBIOS_WRITE_CONFIG_WORD),
++		  "c" (value),
++		  "b" (bx),
++		  "D" ((long) where),
++		  "S" (&pci_indirect));
++	restore_flags(flags);
++	return (int) (ret & 0xff00) >> 8;
++}
++
++int pcibios_write_config_dword (unsigned int bus,
++	unsigned int device_fn, unsigned int where, uint32_t value)
++{
++	unsigned long ret;
++	unsigned long bx = (bus << 8) | device_fn;
++	unsigned long flags;
++
++	save_flags(flags); cli();
++	__asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++		"lcall (%%esi)\n\t"
++#else
++		"lcall *(%%esi)\n\t"
++#endif
++		"jc 1f\n\t"
++		"xor %%ah, %%ah\n"
++		"1:"
++		: "=a" (ret)
++		: "0" (PCIBIOS_WRITE_CONFIG_DWORD),
++		  "c" (value),
++		  "b" (bx),
++		  "D" ((long) where),
++		  "S" (&pci_indirect));
++	restore_flags(flags);
++	return (int) (ret & 0xff00) >> 8;
++}
++
++static void check_pcibios(void)
++{
++	unsigned long signature;
++	unsigned char present_status;
++	unsigned char major_revision;
++	unsigned char minor_revision;
++	unsigned long flags;
++	int pack;
++
++	if ((pcibios_entry = bios32_service(PCI_SERVICE))) {
++		pci_indirect.address = pcibios_entry;
++
++		save_flags(flags);
++		__asm__(
++#ifdef ABSOLUTE_WITHOUT_ASTERISK
++			"lcall (%%edi)\n\t"
++#else
++			"lcall *(%%edi)\n\t"
++#endif
++			"jc 1f\n\t"
++			"xor %%ah, %%ah\n"
++			"1:\tshl $8, %%eax\n\t"
++			"movw %%bx, %%ax"
++			: "=d" (signature),
++			  "=a" (pack)
++			: "1" (PCIBIOS_PCI_BIOS_PRESENT),
++			  "D" (&pci_indirect)
++			: "bx", "cx");
++		restore_flags(flags);
++
++		present_status = (pack >> 16) & 0xff;
++		major_revision = (pack >> 8) & 0xff;
++		minor_revision = pack & 0xff;
++		if (present_status || (signature != PCI_SIGNATURE)) {
++			printf("ERROR: BIOS32 says PCI BIOS, but no PCI "
++				"BIOS????\n");
++			pcibios_entry = 0;
++		}
++#if	DEBUG
++		if (pcibios_entry) {
++			printf ("pcibios_init : PCI BIOS revision %hhX.%hhX"
++				" entry at %#X\n", major_revision,
++				minor_revision, pcibios_entry);
++		}
++#endif
++	}
++}
++
++static void pcibios_init(void)
++{
++	union bios32 *check;
++	unsigned char sum;
++	int i, length;
++	unsigned long bios32_entry = 0;
++
++	EnterFunction("pcibios_init");
++	/*
++	 * Follow the standard procedure for locating the BIOS32 Service
++	 * directory by scanning the permissible address range from
++	 * 0xe0000 through 0xfffff for a valid BIOS32 structure.
++	 *
++	 */
++
++	for (check = (union bios32 *) 0xe0000; check <= (union bios32 *) 0xffff0; ++check) {
++		if (check->fields.signature != BIOS32_SIGNATURE)
++			continue;
++		length = check->fields.length * 16;
++		if (!length)
++			continue;
++		sum = 0;
++		for (i = 0; i < length ; ++i)
++			sum += check->chars[i];
++		if (sum != 0)
++			continue;
++		if (check->fields.revision != 0) {
++			printf("pcibios_init : unsupported revision %d at %#X, mail drew@colorado.edu\n",
++				check->fields.revision, check);
++			continue;
++		}
++#if	DEBUG
++		printf("pcibios_init : BIOS32 Service Directory "
++			"structure at %#X\n", check);
++#endif
++		if (!bios32_entry) {
++			if (check->fields.entry >= 0x100000) {
++				printf("pcibios_init: entry in high "
++					"memory, giving up\n");
++				return;
++			} else {
++				bios32_entry = check->fields.entry;
++#if	DEBUG
++				printf("pcibios_init : BIOS32 Service Directory"
++					" entry at %#X\n", bios32_entry);
++#endif
++				bios32_indirect.address = bios32_entry;
++			}
++		}
++	}
++	if (bios32_entry)
++		check_pcibios();
++	LeaveFunction("pcibios_init");
++}
++
++#endif	/* CONFIG_PCI_DIRECT not defined*/
++
++unsigned long pcibios_bus_base(unsigned int bus __unused)
++{
++	/* architecturally this must be 0 */
++	return 0;
++}
++
++void find_pci(int type, struct pci_device *dev)
++{
++	EnterFunction("find_pci");
++#ifndef	CONFIG_PCI_DIRECT
++	if (!pcibios_entry) {
++		pcibios_init();
++	}
++	if (!pcibios_entry) {
++		printf("pci_init: no BIOS32 detected\n");
++		return;
++	}
++#endif
++	LeaveFunction("find_pci");
++	return scan_pci_bus(type, dev);
++}
+diff -Naur grub-0.97.orig/netboot/pcnet32.c grub-0.97/netboot/pcnet32.c
+--- grub-0.97.orig/netboot/pcnet32.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pcnet32.c	2005-08-31 22:57:50.000000000 +0000
+@@ -0,0 +1,1004 @@
++/**************************************************************************
++*
++*    pcnet32.c -- Etherboot device driver for the AMD PCnet32
++*    Written 2003-2003 by Timothy Legge <tlegge@rogers.com>
++*
++*    This program is free software; you can redistribute it and/or modify
++*    it under the terms of the GNU General Public License as published by
++*    the Free Software Foundation; either version 2 of the License, or
++*    (at your option) any later version.
++*
++*    This program is distributed in the hope that it will be useful,
++*    but WITHOUT ANY WARRANTY; without even the implied warranty of
++*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++*    GNU General Public License for more details.
++*
++*    You should have received a copy of the GNU General Public License
++*    along with this program; if not, write to the Free Software
++*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*
++*    Portions of this code based on:
++*		pcnet32.c: An AMD PCnet32 ethernet driver for linux:
++*
++*	(C) 1996-1999 Thomas Bogendoerfer
++*		See Linux Driver for full information
++*	
++*	The transmit and poll functions were written with reference to:
++*	lance.c - LANCE NIC driver for Etherboot written by Ken Yap 
++*	
++*	Linux Driver Version 1.27a, 10.02.2002
++* 
++* 
++*    REVISION HISTORY:
++*    ================
++*    v1.0	08-06-2003	timlegge	Initial port of Linux driver
++*    v1.1	08-23-2003	timlegge	Add multicast support
++*    v1.2	01-17-2004	timlegge	Initial driver output cleanup
++*    v1.3	03-29-2004	timlegge	More driver cleanup
++*    
++*    Indent Options: indent -kr -i8
++***************************************************************************/
++
++/* to get some global routines like printf */
++#include "etherboot.h"
++/* to get the interface to the body of the program */
++#include "nic.h"
++/* to get the PCI support functions, if this is a PCI NIC */
++#include "pci.h"
++/* Include the time functions */
++#include "timer.h"
++#include "mii.h"
++/* void hex_dump(const char *data, const unsigned int len); */
++
++/* Etherboot Specific definations */
++#define drv_version "v1.3"
++#define drv_date "03-29-2004"
++
++typedef unsigned char u8;
++typedef signed char s8;
++typedef unsigned short u16;
++typedef signed short s16;
++typedef unsigned int u32;
++typedef signed int s32;
++
++static u32 ioaddr;		/* Globally used for the card's io address */
++
++#ifdef EDEBUG
++#define dprintf(x) printf x
++#else
++#define dprintf(x)
++#endif
++
++/* Condensed operations for readability. */
++#define virt_to_le32desc(addr)  cpu_to_le32(virt_to_bus(addr))
++#define le32desc_to_virt(addr)  bus_to_virt(le32_to_cpu(addr))
++
++/* End Etherboot Specific */
++
++int cards_found /* __initdata */ ;
++
++#ifdef REMOVE
++/* FIXME: Remove these they are probably pointless */
++
++/* 
++ * VLB I/O addresses 
++ */
++static unsigned int pcnet32_portlist[] /*__initdata */  =
++{ 0x300, 0x320, 0x340, 0x360, 0 };
++
++static int pcnet32_debug = 1;
++static int tx_start = 1;	/* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */
++static int pcnet32vlb;		/* check for VLB cards ? */
++
++static struct net_device *pcnet32_dev;
++
++static int max_interrupt_work = 80;
++static int rx_copybreak = 200;
++#endif
++#define PCNET32_PORT_AUI      0x00
++#define PCNET32_PORT_10BT     0x01
++#define PCNET32_PORT_GPSI     0x02
++#define PCNET32_PORT_MII      0x03
++
++#define PCNET32_PORT_PORTSEL  0x03
++#define PCNET32_PORT_ASEL     0x04
++#define PCNET32_PORT_100      0x40
++#define PCNET32_PORT_FD	      0x80
++
++#define PCNET32_DMA_MASK 0xffffffff
++
++/*
++ * table to translate option values from tulip
++ * to internal options
++ */
++static unsigned char options_mapping[] = {
++	PCNET32_PORT_ASEL,	/*  0 Auto-select      */
++	PCNET32_PORT_AUI,	/*  1 BNC/AUI          */
++	PCNET32_PORT_AUI,	/*  2 AUI/BNC          */
++	PCNET32_PORT_ASEL,	/*  3 not supported    */
++	PCNET32_PORT_10BT | PCNET32_PORT_FD,	/*  4 10baseT-FD       */
++	PCNET32_PORT_ASEL,	/*  5 not supported    */
++	PCNET32_PORT_ASEL,	/*  6 not supported    */
++	PCNET32_PORT_ASEL,	/*  7 not supported    */
++	PCNET32_PORT_ASEL,	/*  8 not supported    */
++	PCNET32_PORT_MII,	/*  9 MII 10baseT      */
++	PCNET32_PORT_MII | PCNET32_PORT_FD,	/* 10 MII 10baseT-FD   */
++	PCNET32_PORT_MII,	/* 11 MII (autosel)    */
++	PCNET32_PORT_10BT,	/* 12 10BaseT          */
++	PCNET32_PORT_MII | PCNET32_PORT_100,	/* 13 MII 100BaseTx    */
++	PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD,	/* 14 MII 100BaseTx-FD */
++	PCNET32_PORT_ASEL	/* 15 not supported    */
++};
++
++#define MAX_UNITS 8		/* More are supported, limit only on options */
++static int options[MAX_UNITS];
++static int full_duplex[MAX_UNITS];
++
++/*
++ *				Theory of Operation
++ * 
++ * This driver uses the same software structure as the normal lance
++ * driver. So look for a verbose description in lance.c. The differences
++ * to the normal lance driver is the use of the 32bit mode of PCnet32
++ * and PCnetPCI chips. Because these chips are 32bit chips, there is no
++ * 16MB limitation and we don't need bounce buffers.
++ */
++
++
++
++/*
++ * Set the number of Tx and Rx buffers, using Log_2(# buffers).
++ * Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
++ * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
++ */
++#ifndef PCNET32_LOG_TX_BUFFERS
++#define PCNET32_LOG_TX_BUFFERS 1
++#define PCNET32_LOG_RX_BUFFERS 2
++#endif
++
++#define TX_RING_SIZE		(1 << (PCNET32_LOG_TX_BUFFERS))
++#define TX_RING_MOD_MASK	(TX_RING_SIZE - 1)
++/* FIXME: Fix this to allow multiple tx_ring descriptors */
++#define TX_RING_LEN_BITS	0x0000	/*PCNET32_LOG_TX_BUFFERS) << 12) */
++
++#define RX_RING_SIZE		(1 << (PCNET32_LOG_RX_BUFFERS))
++#define RX_RING_MOD_MASK	(RX_RING_SIZE - 1)
++#define RX_RING_LEN_BITS	((PCNET32_LOG_RX_BUFFERS) << 4)
++
++#define PKT_BUF_SZ		1544
++
++/* Offsets from base I/O address. */
++#define PCNET32_WIO_RDP		0x10
++#define PCNET32_WIO_RAP		0x12
++#define PCNET32_WIO_RESET	0x14
++#define PCNET32_WIO_BDP		0x16
++
++#define PCNET32_DWIO_RDP	0x10
++#define PCNET32_DWIO_RAP	0x14
++#define PCNET32_DWIO_RESET	0x18
++#define PCNET32_DWIO_BDP	0x1C
++
++#define PCNET32_TOTAL_SIZE	0x20
++
++/* Buffers for the tx and Rx */
++
++/* Create a static buffer of size PKT_BUF_SZ for each
++TX Descriptor.  All descriptors point to a
++part of this buffer */
++static unsigned char txb[PKT_BUF_SZ * TX_RING_SIZE];
++//    __attribute__ ((aligned(16)));
++
++/* Create a static buffer of size PKT_BUF_SZ for each
++RX Descriptor   All descriptors point to a
++part of this buffer */
++static unsigned char rxb[RX_RING_SIZE * PKT_BUF_SZ];
++//    __attribute__ ((aligned(16)));
++
++/* The PCNET32 Rx and Tx ring descriptors. */
++struct pcnet32_rx_head {
++	u32 base;
++	s16 buf_length;
++	s16 status;
++	u32 msg_length;
++	u32 reserved;
++};
++
++struct pcnet32_tx_head {
++	u32 base;
++	s16 length;
++	s16 status;
++	u32 misc;
++	u32 reserved;
++};
++
++/* The PCNET32 32-Bit initialization block, described in databook. */
++struct pcnet32_init_block {
++	u16 mode;
++	u16 tlen_rlen;
++	u8 phys_addr[6];
++	u16 reserved;
++	u32 filter[2];
++	/* Receive and transmit ring base, along with extra bits. */
++	u32 rx_ring;
++	u32 tx_ring;
++};
++/* PCnet32 access functions */
++struct pcnet32_access {
++	u16(*read_csr) (unsigned long, int);
++	void (*write_csr) (unsigned long, int, u16);
++	 u16(*read_bcr) (unsigned long, int);
++	void (*write_bcr) (unsigned long, int, u16);
++	 u16(*read_rap) (unsigned long);
++	void (*write_rap) (unsigned long, u16);
++	void (*reset) (unsigned long);
++};
++
++/* Define the TX Descriptor */
++static struct pcnet32_tx_head tx_ring[TX_RING_SIZE]
++    __attribute__ ((aligned(16)));
++
++
++/* Define the RX Descriptor */
++static struct pcnet32_rx_head rx_ring[RX_RING_SIZE]
++    __attribute__ ((aligned(16)));
++
++/* May need to be moved to mii.h */
++struct mii_if_info {
++	int phy_id;
++	int advertising;
++	unsigned int full_duplex:1;	/* is full duplex? */
++};
++
++/*
++ * The first three fields of pcnet32_private are read by the ethernet device 
++ * so we allocate the structure should be allocated by pci_alloc_consistent().
++ */
++#define MII_CNT 4
++struct pcnet32_private {
++	struct pcnet32_init_block init_block;
++	struct pci_dev *pci_dev;	/* Pointer to the associated pci device structure */
++	const char *name;
++	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
++	struct sk_buff *tx_skbuff[TX_RING_SIZE];
++	struct sk_buff *rx_skbuff[RX_RING_SIZE];
++	struct pcnet32_access a;
++	unsigned int cur_rx, cur_tx;	/* The next free ring entry */
++	char tx_full;
++	int options;
++	int shared_irq:1,	/* shared irq possible */
++	 ltint:1,		/* enable TxDone-intr inhibitor */
++	 dxsuflo:1,		/* disable transmit stop on uflo */
++	 mii:1;			/* mii port available */
++	struct mii_if_info mii_if;
++	unsigned char phys[MII_CNT];
++	struct net_device *next;
++	int full_duplex:1;
++} lpx;
++
++static struct pcnet32_private *lp;
++
++static int mdio_read(struct nic *nic __unused, int phy_id, int reg_num);
++#if 0
++static void mdio_write(struct nic *nic __unused, int phy_id, int reg_num,
++		       int val);
++#endif
++enum pci_flags_bit {
++	PCI_USES_IO = 1, PCI_USES_MEM = 2, PCI_USES_MASTER = 4,
++	PCI_ADDR0 = 0x10 << 0, PCI_ADDR1 = 0x10 << 1, PCI_ADDR2 =
++	    0x10 << 2, PCI_ADDR3 = 0x10 << 3,
++};
++
++
++static u16 pcnet32_wio_read_csr(unsigned long addr, int index)
++{
++	outw(index, addr + PCNET32_WIO_RAP);
++	return inw(addr + PCNET32_WIO_RDP);
++}
++
++static void pcnet32_wio_write_csr(unsigned long addr, int index, u16 val)
++{
++	outw(index, addr + PCNET32_WIO_RAP);
++	outw(val, addr + PCNET32_WIO_RDP);
++}
++
++static u16 pcnet32_wio_read_bcr(unsigned long addr, int index)
++{
++	outw(index, addr + PCNET32_WIO_RAP);
++	return inw(addr + PCNET32_WIO_BDP);
++}
++
++static void pcnet32_wio_write_bcr(unsigned long addr, int index, u16 val)
++{
++	outw(index, addr + PCNET32_WIO_RAP);
++	outw(val, addr + PCNET32_WIO_BDP);
++}
++
++static u16 pcnet32_wio_read_rap(unsigned long addr)
++{
++	return inw(addr + PCNET32_WIO_RAP);
++}
++
++static void pcnet32_wio_write_rap(unsigned long addr, u16 val)
++{
++	outw(val, addr + PCNET32_WIO_RAP);
++}
++
++static void pcnet32_wio_reset(unsigned long addr)
++{
++	inw(addr + PCNET32_WIO_RESET);
++}
++
++static int pcnet32_wio_check(unsigned long addr)
++{
++	outw(88, addr + PCNET32_WIO_RAP);
++	return (inw(addr + PCNET32_WIO_RAP) == 88);
++}
++
++static struct pcnet32_access pcnet32_wio = {
++      read_csr:pcnet32_wio_read_csr,
++      write_csr:pcnet32_wio_write_csr,
++      read_bcr:pcnet32_wio_read_bcr,
++      write_bcr:pcnet32_wio_write_bcr,
++      read_rap:pcnet32_wio_read_rap,
++      write_rap:pcnet32_wio_write_rap,
++      reset:pcnet32_wio_reset
++};
++
++static u16 pcnet32_dwio_read_csr(unsigned long addr, int index)
++{
++	outl(index, addr + PCNET32_DWIO_RAP);
++	return (inl(addr + PCNET32_DWIO_RDP) & 0xffff);
++}
++
++static void pcnet32_dwio_write_csr(unsigned long addr, int index, u16 val)
++{
++	outl(index, addr + PCNET32_DWIO_RAP);
++	outl(val, addr + PCNET32_DWIO_RDP);
++}
++
++static u16 pcnet32_dwio_read_bcr(unsigned long addr, int index)
++{
++	outl(index, addr + PCNET32_DWIO_RAP);
++	return (inl(addr + PCNET32_DWIO_BDP) & 0xffff);
++}
++
++static void pcnet32_dwio_write_bcr(unsigned long addr, int index, u16 val)
++{
++	outl(index, addr + PCNET32_DWIO_RAP);
++	outl(val, addr + PCNET32_DWIO_BDP);
++}
++
++static u16 pcnet32_dwio_read_rap(unsigned long addr)
++{
++	return (inl(addr + PCNET32_DWIO_RAP) & 0xffff);
++}
++
++static void pcnet32_dwio_write_rap(unsigned long addr, u16 val)
++{
++	outl(val, addr + PCNET32_DWIO_RAP);
++}
++
++static void pcnet32_dwio_reset(unsigned long addr)
++{
++	inl(addr + PCNET32_DWIO_RESET);
++}
++
++static int pcnet32_dwio_check(unsigned long addr)
++{
++	outl(88, addr + PCNET32_DWIO_RAP);
++	return ((inl(addr + PCNET32_DWIO_RAP) & 0xffff) == 88);
++}
++
++static struct pcnet32_access pcnet32_dwio = {
++      read_csr:pcnet32_dwio_read_csr,
++      write_csr:pcnet32_dwio_write_csr,
++      read_bcr:pcnet32_dwio_read_bcr,
++      write_bcr:pcnet32_dwio_write_bcr,
++      read_rap:pcnet32_dwio_read_rap,
++      write_rap:pcnet32_dwio_write_rap,
++      reset:pcnet32_dwio_reset
++};
++
++
++/* Initialize the PCNET32 Rx and Tx rings. */
++static int pcnet32_init_ring(struct nic *nic)
++{
++	int i;
++
++	lp->tx_full = 0;
++	lp->cur_rx = lp->cur_tx = 0;
++
++	for (i = 0; i < RX_RING_SIZE; i++) {
++		rx_ring[i].base = (u32) virt_to_le32desc(&rxb[i]);
++		rx_ring[i].buf_length = le16_to_cpu(-PKT_BUF_SZ);
++		rx_ring[i].status = le16_to_cpu(0x8000);
++	}
++
++	/* The Tx buffer address is filled in as needed, but we do need to clear
++	   the upper ownership bit. */
++	for (i = 0; i < TX_RING_SIZE; i++) {
++		tx_ring[i].base = 0;
++		tx_ring[i].status = 0;
++	}
++
++
++	lp->init_block.tlen_rlen =
++	    le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
++	for (i = 0; i < 6; i++)
++		lp->init_block.phys_addr[i] = nic->node_addr[i];
++	lp->init_block.rx_ring = (u32) virt_to_le32desc(&rx_ring[0]);
++	lp->init_block.tx_ring = (u32) virt_to_le32desc(&tx_ring[0]);
++	return 0;
++}
++
++/**************************************************************************
++RESET - Reset adapter
++***************************************************************************/
++static void pcnet32_reset(struct nic *nic)
++{
++	/* put the card in its initial state */
++	u16 val;
++	int i;
++
++	/* Reset the PCNET32 */
++	lp->a.reset(ioaddr);
++
++	/* switch pcnet32 to 32bit mode */
++	lp->a.write_bcr(ioaddr, 20, 2);
++
++	/* set/reset autoselect bit */
++	val = lp->a.read_bcr(ioaddr, 2) & ~2;
++	if (lp->options & PCNET32_PORT_ASEL)
++		val |= 2;
++	lp->a.write_bcr(ioaddr, 2, val);
++	/* handle full duplex setting */
++	if (lp->full_duplex) {
++		val = lp->a.read_bcr(ioaddr, 9) & ~3;
++		if (lp->options & PCNET32_PORT_FD) {
++			val |= 1;
++			if (lp->options ==
++			    (PCNET32_PORT_FD | PCNET32_PORT_AUI))
++				val |= 2;
++		} else if (lp->options & PCNET32_PORT_ASEL) {
++			/* workaround of xSeries250, turn on for 79C975 only */
++			i = ((lp->a.
++			      read_csr(ioaddr,
++				       88) | (lp->a.read_csr(ioaddr,
++							     89) << 16)) >>
++			     12) & 0xffff;
++			if (i == 0x2627)
++				val |= 3;
++		}
++		lp->a.write_bcr(ioaddr, 9, val);
++	}
++
++	/* set/reset GPSI bit in test register */
++	val = lp->a.read_csr(ioaddr, 124) & ~0x10;
++	if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI)
++		val |= 0x10;
++	lp->a.write_csr(ioaddr, 124, val);
++
++	if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) {
++		val = lp->a.read_bcr(ioaddr, 32) & ~0x38;	/* disable Auto Negotiation, set 10Mpbs, HD */
++		if (lp->options & PCNET32_PORT_FD)
++			val |= 0x10;
++		if (lp->options & PCNET32_PORT_100)
++			val |= 0x08;
++		lp->a.write_bcr(ioaddr, 32, val);
++	} else {
++		if (lp->options & PCNET32_PORT_ASEL) {	/* enable auto negotiate, setup, disable fd */
++			val = lp->a.read_bcr(ioaddr, 32) & ~0x98;
++			val |= 0x20;
++			lp->a.write_bcr(ioaddr, 32, val);
++		}
++	}
++
++#ifdef DO_DXSUFLO
++	if (lp->dxsuflo) {	/* Disable transmit stop on underflow */
++		val = lp->a.read_csr(ioaddr, 3);
++		val |= 0x40;
++		lp->a.write_csr(ioaddr, 3, val);
++	}
++#endif
++
++	if (lp->ltint) {	/* Enable TxDone-intr inhibitor */
++		val = lp->a.read_csr(ioaddr, 5);
++		val |= (1 << 14);
++		lp->a.write_csr(ioaddr, 5, val);
++	}
++	lp->init_block.mode =
++	    le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
++	lp->init_block.filter[0] = 0xffffffff;
++	lp->init_block.filter[1] = 0xffffffff;
++
++	pcnet32_init_ring(nic);
++
++
++	/* Re-initialize the PCNET32, and start it when done. */
++	lp->a.write_csr(ioaddr, 1,
++			(virt_to_bus(&lp->init_block)) & 0xffff);
++	lp->a.write_csr(ioaddr, 2, (virt_to_bus(&lp->init_block)) >> 16);
++	lp->a.write_csr(ioaddr, 4, 0x0915);
++	lp->a.write_csr(ioaddr, 0, 0x0001);
++
++
++	i = 0;
++	while (i++ < 100)
++		if (lp->a.read_csr(ioaddr, 0) & 0x0100)
++			break;
++	/* 
++	 * We used to clear the InitDone bit, 0x0100, here but Mark Stockton
++	 * reports that doing so triggers a bug in the '974.
++	 */
++	lp->a.write_csr(ioaddr, 0, 0x0042);
++
++	dprintf(("pcnet32 open, csr0 %hX.\n", lp->a.read_csr(ioaddr, 0)));
++
++}
++
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int pcnet32_poll(struct nic *nic __unused, int retrieve)
++{
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++
++	int status;
++	int entry;
++
++	entry = lp->cur_rx & RX_RING_MOD_MASK;
++	status = ((short) le16_to_cpu(rx_ring[entry].status) >> 8);
++
++	if (status < 0)
++		return 0;
++
++	if ( ! retrieve ) return 1;
++
++	if (status == 0x03) {
++		nic->packetlen =
++		    (le32_to_cpu(rx_ring[entry].msg_length) & 0xfff) - 4;
++		memcpy(nic->packet, &rxb[entry], nic->packetlen);
++
++		/* Andrew Boyd of QNX reports that some revs of the 79C765
++		 * clear the buffer length */
++		rx_ring[entry].buf_length = le16_to_cpu(-PKT_BUF_SZ);
++		rx_ring[entry].status |= le16_to_cpu(0x8000);	/* prime for next receive */
++		/* Switch to the next Rx ring buffer */
++		lp->cur_rx++;
++
++	} else {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void pcnet32_transmit(struct nic *nic __unused, const char *d,	/* Destination */
++			     unsigned int t,	/* Type */
++			     unsigned int s,	/* size */
++			     const char *p)
++{				/* Packet */
++	/* send the packet to destination */
++	unsigned long time;
++	u8 *ptxb;
++	u16 nstype;
++	u16 status;
++	int entry = 0;		/*lp->cur_tx & TX_RING_MOD_MASK; */
++
++	status = 0x8300;
++	/* point to the current txb incase multiple tx_rings are used */
++	ptxb = txb + (lp->cur_tx * PKT_BUF_SZ);
++
++	/* copy the packet to ring buffer */
++	memcpy(ptxb, d, ETH_ALEN);	/* dst */
++	memcpy(ptxb + ETH_ALEN, nic->node_addr, ETH_ALEN);	/* src */
++	nstype = htons((u16) t);	/* type */
++	memcpy(ptxb + 2 * ETH_ALEN, (u8 *) & nstype, 2);	/* type */
++	memcpy(ptxb + ETH_HLEN, p, s);
++
++	s += ETH_HLEN;
++	while (s < ETH_ZLEN)	/* pad to min length */
++		ptxb[s++] = '\0';
++
++	tx_ring[entry].length = le16_to_cpu(-s);
++	tx_ring[entry].misc = 0x00000000;
++	tx_ring[entry].base = (u32) virt_to_le32desc(ptxb);
++
++	/* we set the top byte as the very last thing */
++	tx_ring[entry].status = le16_to_cpu(status);
++
++
++	/* Trigger an immediate send poll */
++	lp->a.write_csr(ioaddr, 0, 0x0048);
++
++	/* wait for transmit complete */
++	lp->cur_tx = 0;		/* (lp->cur_tx + 1); */
++	time = currticks() + TICKS_PER_SEC;	/* wait one second */
++	while (currticks() < time &&
++	       ((short) le16_to_cpu(tx_ring[entry].status) < 0));
++
++	if ((short) le16_to_cpu(tx_ring[entry].status) < 0)
++		printf("PCNET32 timed out on transmit\n");
++
++	/* Stop pointing at the current txb
++	 * otherwise the card continues to send the packet */
++	tx_ring[entry].base = 0;
++
++}
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void pcnet32_disable(struct dev *dev __unused)
++{
++	/* Stop the PCNET32 here -- it ocassionally polls memory if we don't */
++	lp->a.write_csr(ioaddr, 0, 0x0004);
++
++	/*
++	 * Switch back to 16-bit mode to avoid problesm with dumb 
++	 * DOS packet driver after a warm reboot
++	 */
++	lp->a.write_bcr(ioaddr, 20, 4);
++}
++
++/**************************************************************************
++IRQ - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void pcnet32_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++You should omit the last argument struct pci_device * for a non-PCI NIC
++***************************************************************************/
++static int pcnet32_probe(struct dev *dev, struct pci_device *pci)
++{
++	struct nic *nic = (struct nic *) dev;
++	int i, media;
++	int fdx, mii, fset, dxsuflo, ltint;
++	int chip_version;
++	char *chipname;
++	struct pcnet32_access *a = NULL;
++	u8 promaddr[6];
++
++	int shared = 1;
++	if (pci->ioaddr == 0)
++		return 0;
++
++	/* BASE is used throughout to address the card */
++	ioaddr = pci->ioaddr;
++	printf("pcnet32.c: Found %s, Vendor=0x%hX Device=0x%hX\n",
++	       pci->name, pci->vendor, pci->dev_id);
++
++	nic->irqno  = 0;
++	nic->ioaddr = pci->ioaddr & ~3;
++
++	/* reset the chip */
++	pcnet32_wio_reset(ioaddr);
++
++	/* NOTE: 16-bit check is first, otherwise some older PCnet chips fail */
++	if (pcnet32_wio_read_csr(ioaddr, 0) == 4
++	    && pcnet32_wio_check(ioaddr)) {
++		a = &pcnet32_wio;
++	} else {
++		pcnet32_dwio_reset(ioaddr);
++		if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
++		    && pcnet32_dwio_check(ioaddr)) {
++			a = &pcnet32_dwio;
++		} else
++			return 0;
++	}
++
++	chip_version =
++	    a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr, 89) << 16);
++
++	dprintf(("PCnet chip version is %0xhX\n", chip_version));
++	if ((chip_version & 0xfff) != 0x003)
++		return 0;
++
++	/* initialize variables */
++	fdx = mii = fset = dxsuflo = ltint = 0;
++	chip_version = (chip_version >> 12) & 0xffff;
++
++	switch (chip_version) {
++	case 0x2420:
++		chipname = "PCnet/PCI 79C970";	/* PCI */
++		break;
++	case 0x2430:
++		if (shared)
++			chipname = "PCnet/PCI 79C970";	/* 970 gives the wrong chip id back */
++		else
++			chipname = "PCnet/32 79C965";	/* 486/VL bus */
++		break;
++	case 0x2621:
++		chipname = "PCnet/PCI II 79C970A";	/* PCI */
++		fdx = 1;
++		break;
++	case 0x2623:
++		chipname = "PCnet/FAST 79C971";	/* PCI */
++		fdx = 1;
++		mii = 1;
++		fset = 1;
++		ltint = 1;
++		break;
++	case 0x2624:
++		chipname = "PCnet/FAST+ 79C972";	/* PCI */
++		fdx = 1;
++		mii = 1;
++		fset = 1;
++		break;
++	case 0x2625:
++		chipname = "PCnet/FAST III 79C973";	/* PCI */
++		fdx = 1;
++		mii = 1;
++		break;
++	case 0x2626:
++		chipname = "PCnet/Home 79C978";	/* PCI */
++		fdx = 1;
++		/* 
++		 * This is based on specs published at www.amd.com.  This section
++		 * assumes that a card with a 79C978 wants to go into 1Mb HomePNA
++		 * mode.  The 79C978 can also go into standard ethernet, and there
++		 * probably should be some sort of module option to select the
++		 * mode by which the card should operate
++		 */
++		/* switch to home wiring mode */
++		media = a->read_bcr(ioaddr, 49);
++
++		printf("media reset to %#x.\n", media);
++		a->write_bcr(ioaddr, 49, media);
++		break;
++	case 0x2627:
++		chipname = "PCnet/FAST III 79C975";	/* PCI */
++		fdx = 1;
++		mii = 1;
++		break;
++	default:
++		printf("PCnet version %#x, no PCnet32 chip.\n",
++		       chip_version);
++		return 0;
++	}
++
++	/*
++	 *  On selected chips turn on the BCR18:NOUFLO bit. This stops transmit
++	 *  starting until the packet is loaded. Strike one for reliability, lose
++	 *  one for latency - although on PCI this isnt a big loss. Older chips 
++	 *  have FIFO's smaller than a packet, so you can't do this.
++	 */
++
++	if (fset) {
++		a->write_bcr(ioaddr, 18,
++			     (a->read_bcr(ioaddr, 18) | 0x0800));
++		a->write_csr(ioaddr, 80,
++			     (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00);
++		dxsuflo = 1;
++		ltint = 1;
++	}
++
++	dprintf(("%s at %hX,", chipname, ioaddr));
++
++	/* read PROM address */
++	for (i = 0; i < 6; i++)
++		promaddr[i] = inb(ioaddr + i);
++
++	/* Update the nic structure with the MAC Address */
++	for (i = 0; i < ETH_ALEN; i++) {
++		nic->node_addr[i] = promaddr[i];
++	}
++	/* Print out some hardware info */
++	printf("%s: %! at ioaddr %hX, ", pci->name, nic->node_addr,
++	       ioaddr);
++
++	/* Set to pci bus master */
++	adjust_pci_device(pci);
++
++	/* point to private storage */
++	lp = &lpx;
++
++#if EBDEBUG
++	if (((chip_version + 1) & 0xfffe) == 0x2624) {	/* Version 0x2623 or 0x2624 */
++		i = a->read_csr(ioaddr, 80) & 0x0C00;	/* Check tx_start_pt */
++		dprintf(("    tx_start_pt(0x%hX):", i));
++		switch (i >> 10) {
++		case 0:
++			dprintf(("  20 bytes,"));
++			break;
++		case 1:
++			dprintf(("  64 bytes,"));
++			break;
++		case 2:
++			dprintf((" 128 bytes,"));
++			break;
++		case 3:
++			dprintf(("~220 bytes,"));
++			break;
++		}
++		i = a->read_bcr(ioaddr, 18);	/* Check Burst/Bus control */
++		dprintf((" BCR18(%hX):", i & 0xffff));
++		if (i & (1 << 5))
++			dprintf(("BurstWrEn "));
++		if (i & (1 << 6))
++			dprintf(("BurstRdEn "));
++		if (i & (1 << 7))
++			dprintf(("DWordIO "));
++		if (i & (1 << 11))
++			dprintf(("NoUFlow "));
++		i = a->read_bcr(ioaddr, 25);
++		dprintf(("    SRAMSIZE=0x%hX,", i << 8));
++		i = a->read_bcr(ioaddr, 26);
++		dprintf((" SRAM_BND=0x%hX,", i << 8));
++		i = a->read_bcr(ioaddr, 27);
++		if (i & (1 << 14))
++			dprintf(("LowLatRx"));
++	}
++#endif
++	lp->name = chipname;
++	lp->shared_irq = shared;
++	lp->full_duplex = fdx;
++	lp->dxsuflo = dxsuflo;
++	lp->ltint = ltint;
++	lp->mii = mii;
++	/* FIXME: Fix Options for only one card */
++	if ((cards_found >= MAX_UNITS)
++	    || ((unsigned int) options[cards_found] > sizeof(options_mapping)))
++		lp->options = PCNET32_PORT_ASEL;
++	else
++		lp->options = options_mapping[options[cards_found]];
++
++	if (fdx && !(lp->options & PCNET32_PORT_ASEL) &&
++	    ((cards_found >= MAX_UNITS) || full_duplex[cards_found]))
++		lp->options |= PCNET32_PORT_FD;
++
++	if (!a) {
++		printf("No access methods\n");
++		return 0;
++	}
++	lp->a = *a;
++
++	/* detect special T1/E1 WAN card by checking for MAC address */
++	if (nic->node_addr[0] == 0x00 && nic->node_addr[1] == 0xe0
++	    && nic->node_addr[2] == 0x75)
++		lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI;
++
++	lp->init_block.mode = le16_to_cpu(0x0003);	/* Disable Rx and Tx. */
++	lp->init_block.tlen_rlen =
++	    le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
++	for (i = 0; i < 6; i++)
++		lp->init_block.phys_addr[i] = nic->node_addr[i];
++	lp->init_block.filter[0] = 0xffffffff;
++	lp->init_block.filter[1] = 0xffffffff;
++	lp->init_block.rx_ring = virt_to_bus(&rx_ring);
++	lp->init_block.tx_ring = virt_to_bus(&tx_ring);
++
++	/* switch pcnet32 to 32bit mode */
++	a->write_bcr(ioaddr, 20, 2);
++
++
++	a->write_csr(ioaddr, 1, (virt_to_bus(&lp->init_block)) & 0xffff);
++	a->write_csr(ioaddr, 2, (virt_to_bus(&lp->init_block)) >> 16);
++
++	/* 
++	 * To auto-IRQ we enable the initialization-done and DMA error
++	 * interrupts. For ISA boards we get a DMA error, but VLB and PCI
++	 * boards will work.
++	 */
++	/* Trigger an initialization just for the interrupt. */
++
++	a->write_csr(ioaddr, 0, 0x41);
++	mdelay(1);
++
++	cards_found++;
++
++	/* point to NIC specific routines */
++	pcnet32_reset(nic);
++	if (1) {
++	        int tmp;
++		int phy, phy_idx = 0;
++		u16 mii_lpa;
++		lp->phys[0] = 1;	/* Default Setting */
++		for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
++			int mii_status = mdio_read(nic, phy, MII_BMSR);
++			if (mii_status != 0xffff && mii_status != 0x0000) {
++				lp->phys[phy_idx++] = phy;
++				lp->mii_if.advertising =
++				    mdio_read(nic, phy, MII_ADVERTISE);
++				if ((mii_status & 0x0040) == 0) {
++				  tmp = phy;
++				  dprintf (("MII PHY found at address %d, status " 
++					    "%hX advertising %hX\n", phy, mii_status, 
++					    lp->mii_if.advertising));
++				}
++			}
++		}
++		if (phy_idx == 0)
++			printf("No MII transceiver found!\n");
++		lp->mii_if.phy_id = lp->phys[0];
++
++		lp->mii_if.advertising =
++		    mdio_read(nic, lp->phys[0], MII_ADVERTISE);
++
++		mii_lpa = mdio_read(nic, lp->phys[0], MII_LPA);
++		lp->mii_if.advertising &= mii_lpa;
++		if (lp->mii_if.advertising & ADVERTISE_100FULL)
++			printf("100Mbps Full-Duplex\n");
++		else if (lp->mii_if.advertising & ADVERTISE_100HALF)
++			printf("100Mbps Half-Duplex\n");
++		else if (lp->mii_if.advertising & ADVERTISE_10FULL)
++			printf("10Mbps Full-Duplex\n");
++		else if (lp->mii_if.advertising & ADVERTISE_10HALF)
++			printf("10Mbps Half-Duplex\n");
++		else
++			printf("\n");
++	}
++
++	nic->poll     = pcnet32_poll;
++	nic->transmit = pcnet32_transmit;
++	dev->disable  = pcnet32_disable;
++	nic->irq      = pcnet32_irq;
++
++	return 1;
++}
++static int mdio_read(struct nic *nic __unused, int phy_id, int reg_num)
++{
++	u16 val_out;
++	int phyaddr;
++
++	if (!lp->mii)
++		return 0;
++
++	phyaddr = lp->a.read_bcr(ioaddr, 33);
++
++	lp->a.write_bcr(ioaddr, 33,
++			((phy_id & 0x1f) << 5) | (reg_num & 0x1f));
++	val_out = lp->a.read_bcr(ioaddr, 34);
++	lp->a.write_bcr(ioaddr, 33, phyaddr);
++
++	return val_out;
++}
++
++#if 0
++static void mdio_write(struct nic *nic __unused, int phy_id, int reg_num,
++		       int val)
++{
++	int phyaddr;
++
++	if (!lp->mii)
++		return;
++
++	phyaddr = lp->a.read_bcr(ioaddr, 33);
++
++	lp->a.write_bcr(ioaddr, 33,
++			((phy_id & 0x1f) << 5) | (reg_num & 0x1f));
++	lp->a.write_bcr(ioaddr, 34, val);
++	lp->a.write_bcr(ioaddr, 33, phyaddr);
++}
++#endif
++
++static struct pci_id pcnet32_nics[] = {
++	PCI_ROM(0x1022, 0x2000, "lancepci", "AMD Lance/PCI"),
++	PCI_ROM(0x1022, 0x2625, "pcnetfastiii", "AMD Lance/PCI PCNet/32"),
++	PCI_ROM(0x1022, 0x2001, "amdhomepna", "AMD Lance/HomePNA"),
++};
++
++struct pci_driver pcnet32_driver = {
++	.type = NIC_DRIVER,
++	.name = "PCNET32/PCI",
++	.probe = pcnet32_probe,
++	.ids = pcnet32_nics,
++	.id_count = sizeof(pcnet32_nics) / sizeof(pcnet32_nics[0]),
++	.class = 0,
++};
+diff -Naur grub-0.97.orig/netboot/pic8259.c grub-0.97/netboot/pic8259.c
+--- grub-0.97.orig/netboot/pic8259.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pic8259.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,267 @@
++/*
++ * Basic support for controlling the 8259 Programmable Interrupt Controllers.
++ *
++ * Initially written by Michael Brown (mcb30).
++ */
++
++#include <etherboot.h>
++#include <pic8259.h>
++
++#ifdef DEBUG_IRQ
++#define DBG(...) printf ( __VA_ARGS__ )
++#else
++#define DBG(...)
++#endif
++
++/* Current locations of trivial IRQ handler.  These will change at
++ * runtime when relocation is used; the handler needs to be copied to
++ * base memory before being installed.
++ */
++void (*trivial_irq_handler)P((void)) = _trivial_irq_handler;
++uint16_t volatile *trivial_irq_trigger_count = &_trivial_irq_trigger_count;
++segoff_t *trivial_irq_chain_to = &_trivial_irq_chain_to;
++uint8_t *trivial_irq_chain = &_trivial_irq_chain;
++irq_t trivial_irq_installed_on = IRQ_NONE;
++
++/* Previous trigger count for trivial IRQ handler */
++static uint16_t trivial_irq_previous_trigger_count = 0;
++
++/* Install a handler for the specified IRQ.  Address of previous
++ * handler will be stored in previous_handler.  Enabled/disabled state
++ * of IRQ will be preserved across call, therefore if the handler does
++ * chaining, ensure that either (a) IRQ is disabled before call, or
++ * (b) previous_handler points directly to the place that the handler
++ * picks up its chain-to address.
++ */
++
++int install_irq_handler ( irq_t irq, segoff_t *handler,
++			  uint8_t *previously_enabled,
++			  segoff_t *previous_handler ) {
++	segoff_t *irq_vector = IRQ_VECTOR ( irq );
++	*previously_enabled = irq_enabled ( irq );
++
++	if ( irq > IRQ_MAX ) {
++		DBG ( "Invalid IRQ number %d\n" );
++		return 0;
++	}
++
++	previous_handler->segment = irq_vector->segment;
++	previous_handler->offset = irq_vector->offset;
++	if ( *previously_enabled ) disable_irq ( irq );
++	DBG ( "Installing handler at %hx:%hx for IRQ %d, leaving %s\n",
++		  handler->segment, handler->offset, irq,
++		  ( *previously_enabled ? "enabled" : "disabled" ) );
++	DBG ( "...(previous handler at %hx:%hx)\n",
++		  previous_handler->segment, previous_handler->offset );
++	irq_vector->segment = handler->segment;
++	irq_vector->offset = handler->offset;
++	if ( *previously_enabled ) enable_irq ( irq );
++	return 1;
++}
++
++/* Remove handler for the specified IRQ.  Routine checks that another
++ * handler has not been installed that chains to handler before
++ * uninstalling handler.  Enabled/disabled state of the IRQ will be
++ * restored to that specified by previously_enabled.
++ */
++
++int remove_irq_handler ( irq_t irq, segoff_t *handler,
++			 uint8_t *previously_enabled,
++			 segoff_t *previous_handler ) {
++	segoff_t *irq_vector = IRQ_VECTOR ( irq );
++
++	if ( irq > IRQ_MAX ) {
++		DBG ( "Invalid IRQ number %d\n" );
++		return 0;
++	}
++	if ( ( irq_vector->segment != handler->segment ) ||
++	     ( irq_vector->offset != handler->offset ) ) {
++		DBG ( "Cannot remove handler for IRQ %d\n" );
++		return 0;
++	}
++
++	DBG ( "Removing handler for IRQ %d\n", irq );
++	disable_irq ( irq );
++	irq_vector->segment = previous_handler->segment;
++	irq_vector->offset = previous_handler->offset;
++	if ( *previously_enabled ) enable_irq ( irq );
++	return 1;
++}
++
++/* Install the trivial IRQ handler.  This routine installs the
++ * handler, tests it and enables the IRQ.
++ */
++
++int install_trivial_irq_handler ( irq_t irq ) {
++	segoff_t trivial_irq_handler_segoff = SEGOFF(trivial_irq_handler);
++	
++	if ( trivial_irq_installed_on != IRQ_NONE ) {
++		DBG ( "Can install trivial IRQ handler only once\n" );
++		return 0;
++	}
++	if ( SEGMENT(trivial_irq_handler) > 0xffff ) {
++		DBG ( "Trivial IRQ handler not in base memory\n" );
++		return 0;
++	}
++
++	DBG ( "Installing trivial IRQ handler on IRQ %d\n", irq );
++	if ( ! install_irq_handler ( irq, &trivial_irq_handler_segoff,
++				     trivial_irq_chain,
++				     trivial_irq_chain_to ) )
++		return 0;
++	trivial_irq_installed_on = irq;
++
++	DBG ( "Testing trivial IRQ handler\n" );
++	disable_irq ( irq );
++	*trivial_irq_trigger_count = 0;
++	trivial_irq_previous_trigger_count = 0;
++	fake_irq ( irq );
++	if ( ! trivial_irq_triggered ( irq ) ) {
++		DBG ( "Installation of trivial IRQ handler failed\n" );
++		remove_trivial_irq_handler ( irq );
++		return 0;
++	}
++	DBG ( "Trivial IRQ handler installed successfully\n" );
++	enable_irq ( irq );
++	return 1;
++}
++
++/* Remove the trivial IRQ handler.
++ */
++
++int remove_trivial_irq_handler ( irq_t irq ) {
++	segoff_t trivial_irq_handler_segoff = SEGOFF(trivial_irq_handler);
++
++	if ( trivial_irq_installed_on == IRQ_NONE ) return 1;
++	if ( irq != trivial_irq_installed_on ) {
++		DBG ( "Cannot uninstall trivial IRQ handler from IRQ %d; "
++		      "is installed on IRQ %d\n", irq,
++		      trivial_irq_installed_on );
++		return 0;
++	}
++
++	if ( ! remove_irq_handler ( irq, &trivial_irq_handler_segoff,
++				    trivial_irq_chain,
++				    trivial_irq_chain_to ) )
++		return 0;
++
++	if ( trivial_irq_triggered ( trivial_irq_installed_on ) ) {
++		DBG ( "Sending EOI for unwanted trivial IRQ\n" );
++		send_specific_eoi ( trivial_irq_installed_on );
++	}
++
++	trivial_irq_installed_on = IRQ_NONE;
++	return 1;
++}
++
++/* Safe method to detect whether or not trivial IRQ has been
++ * triggered.  Using this call avoids potential race conditions.  This
++ * call will return success only once per trigger.
++ */
++
++int trivial_irq_triggered ( irq_t irq ) {
++	uint16_t trivial_irq_this_trigger_count = *trivial_irq_trigger_count;
++	int triggered = ( trivial_irq_this_trigger_count -
++			  trivial_irq_previous_trigger_count );
++	
++	/* irq is not used at present, but we have it in the API for
++	 * future-proofing; in case we want the facility to have
++	 * multiple trivial IRQ handlers installed simultaneously.
++	 *
++	 * Avoid compiler warning about unused variable.
++	 */
++	if ( irq == IRQ_NONE ) {};
++	
++	trivial_irq_previous_trigger_count = trivial_irq_this_trigger_count;
++	return triggered ? 1 : 0;
++}
++
++/* Copy trivial IRQ handler to a new location.  Typically used to copy
++ * the handler into base memory; when relocation is being used we need
++ * to do this before installing the handler.
++ *
++ * Call with target=NULL in order to restore the handler to its
++ * original location.
++ */
++
++int copy_trivial_irq_handler ( void *target, size_t target_size ) {
++	irq_t currently_installed_on = trivial_irq_installed_on;
++	uint32_t offset = ( target == NULL ? 0 :
++			    target - &_trivial_irq_handler_start );
++
++	if (( target != NULL ) && ( target_size < TRIVIAL_IRQ_HANDLER_SIZE )) {
++		DBG ( "Insufficient space to copy trivial IRQ handler\n" );
++		return 0;
++	}
++
++	if ( currently_installed_on != IRQ_NONE ) {
++		DBG ("WARNING: relocating trivial IRQ handler while in use\n");
++		if ( ! remove_trivial_irq_handler ( currently_installed_on ) )
++			return 0;
++	}
++
++	/* Do the actual copy */
++	if ( target != NULL ) {
++		DBG ( "Copying trivial IRQ handler to %hx:%hx\n",
++		      SEGMENT(target), OFFSET(target) );
++		memcpy ( target, &_trivial_irq_handler_start,
++			 TRIVIAL_IRQ_HANDLER_SIZE );
++	} else {
++		DBG ( "Restoring trivial IRQ handler to original location\n" );
++	}
++	/* Update all the pointers to structures within the handler */
++	trivial_irq_handler = ( void (*)P((void)) )
++		( (void*)_trivial_irq_handler + offset );
++	trivial_irq_trigger_count = (uint16_t*)
++		( (void*)&_trivial_irq_trigger_count + offset );
++	trivial_irq_chain_to = (segoff_t*)
++		( (void*)&_trivial_irq_chain_to + offset );
++	trivial_irq_chain = (uint8_t*)
++		( (void*)&_trivial_irq_chain + offset );
++
++	if ( currently_installed_on != IRQ_NONE ) {
++		if ( ! install_trivial_irq_handler ( currently_installed_on ) )
++			return 0;
++	}
++	return 1;
++}
++
++/* Send non-specific EOI(s).  This seems to be inherently unsafe.
++ */
++
++void send_nonspecific_eoi ( irq_t irq ) {
++	DBG ( "Sending non-specific EOI for IRQ %d\n", irq );
++	if ( irq >= IRQ_PIC_CUTOFF ) {
++		outb ( ICR_EOI_NON_SPECIFIC, PIC2_ICR );
++	}		
++	outb ( ICR_EOI_NON_SPECIFIC, PIC1_ICR );
++}
++
++/* Send specific EOI(s).
++ */
++
++void send_specific_eoi ( irq_t irq ) {
++	DBG ( "Sending specific EOI for IRQ %d\n", irq );
++	outb ( ICR_EOI_SPECIFIC | ICR_VALUE(irq), ICR_REG(irq) );
++	if ( irq >= IRQ_PIC_CUTOFF ) {
++		outb ( ICR_EOI_SPECIFIC | ICR_VALUE(CHAINED_IRQ),
++		       ICR_REG(CHAINED_IRQ) );
++	}
++}
++
++/* Dump current 8259 status: enabled IRQs and handler addresses.
++ */
++
++#ifdef DEBUG_IRQ
++void dump_irq_status ( void ) {
++	int irq = 0;
++	
++	for ( irq = 0; irq < 16; irq++ ) {
++		if ( irq_enabled ( irq ) ) {
++			printf ( "IRQ%d enabled, ISR at %hx:%hx\n", irq,
++				 IRQ_VECTOR(irq)->segment,
++				 IRQ_VECTOR(irq)->offset );
++		}
++	}
++}
++#endif
+diff -Naur grub-0.97.orig/netboot/pic8259.h grub-0.97/netboot/pic8259.h
+--- grub-0.97.orig/netboot/pic8259.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pic8259.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,99 @@
++/*
++ * Basic support for controlling the 8259 Programmable Interrupt Controllers.
++ *
++ * Initially written by Michael Brown (mcb30).
++ */
++
++#ifndef PIC8259_H
++#define PIC8259_H
++
++/* For segoff_t */
++#include <segoff.h>
++
++#define IRQ_PIC_CUTOFF (8)
++
++/* 8259 register locations */
++#define PIC1_ICW1 (0x20)
++#define PIC1_OCW2 (0x20)
++#define PIC1_OCW3 (0x20)
++#define PIC1_ICR (0x20)
++#define PIC1_IRR (0x20)
++#define PIC1_ISR (0x20)
++#define PIC1_ICW2 (0x21)
++#define PIC1_ICW3 (0x21)
++#define PIC1_ICW4 (0x21)
++#define PIC1_IMR (0x21)
++#define PIC2_ICW1 (0xa0)
++#define PIC2_OCW2 (0xa0)
++#define PIC2_OCW3 (0xa0)
++#define PIC2_ICR (0xa0)
++#define PIC2_IRR (0xa0)
++#define PIC2_ISR (0xa0)
++#define PIC2_ICW2 (0xa1)
++#define PIC2_ICW3 (0xa1)
++#define PIC2_ICW4 (0xa1)
++#define PIC2_IMR (0xa1)
++
++/* Register command values */
++#define OCW3_ID (0x08)
++#define OCW3_READ_IRR (0x03)
++#define OCW3_READ_ISR (0x02)
++#define ICR_EOI_NON_SPECIFIC (0x20)
++#define ICR_EOI_NOP (0x40)
++#define ICR_EOI_SPECIFIC (0x60)
++#define ICR_EOI_SET_PRIORITY (0xc0)
++
++/* Macros to enable/disable IRQs */
++#define IMR_REG(x) ( (x) < IRQ_PIC_CUTOFF ? PIC1_IMR : PIC2_IMR )
++#define IMR_BIT(x) ( 1 << ( (x) % IRQ_PIC_CUTOFF ) )
++#define irq_enabled(x) ( ( inb ( IMR_REG(x) ) & IMR_BIT(x) ) == 0 )
++#define enable_irq(x) outb ( inb( IMR_REG(x) ) & ~IMR_BIT(x), IMR_REG(x) )
++#define disable_irq(x) outb ( inb( IMR_REG(x) ) | IMR_BIT(x), IMR_REG(x) )
++
++/* Macros for acknowledging IRQs */
++#define ICR_REG(x) ( (x) < IRQ_PIC_CUTOFF ? PIC1_ICR : PIC2_ICR )
++#define ICR_VALUE(x) ( (x) % IRQ_PIC_CUTOFF )
++#define CHAINED_IRQ 2
++
++/* Utility macros to convert IRQ numbers to INT numbers and INT vectors  */
++#define IRQ_INT(x) ( (x)<IRQ_PIC_CUTOFF ? (x)+0x08 : (x)-IRQ_PIC_CUTOFF+0x70 )
++#define INT_VECTOR(x) ( (segoff_t*) phys_to_virt( 4 * (x) ) )
++#define IRQ_VECTOR(x) ( INT_VECTOR ( IRQ_INT(x) ) )
++
++/* Other constants */
++typedef uint8_t irq_t;
++#define IRQ_MAX (15)
++#define IRQ_NONE (0xff)
++
++/* Labels in assembly code (in pcbios.S)
++ */
++extern void _trivial_irq_handler_start;
++extern void _trivial_irq_handler ( void );
++extern volatile uint16_t _trivial_irq_trigger_count;
++extern segoff_t _trivial_irq_chain_to;
++extern uint8_t _trivial_irq_chain;
++extern void _trivial_irq_handler_end;
++#define TRIVIAL_IRQ_HANDLER_SIZE \
++	((uint32_t)( &_trivial_irq_handler_end - &_trivial_irq_handler_start ))
++
++/* Function prototypes
++ */
++int install_irq_handler ( irq_t irq, segoff_t *handler,
++			  uint8_t *previously_enabled,
++			  segoff_t *previous_handler );
++int remove_irq_handler ( irq_t irq, segoff_t *handler,
++			 uint8_t *previously_enabled,
++			 segoff_t *previous_handler );
++int install_trivial_irq_handler ( irq_t irq );
++int remove_trivial_irq_handler ( irq_t irq );
++int trivial_irq_triggered ( irq_t irq );
++int copy_trivial_irq_handler ( void *target, size_t target_size );
++void send_non_specific_eoi ( irq_t irq );
++void send_specific_eoi ( irq_t irq );
++#ifdef DEBUG_IRQ
++void dump_irq_status ( void );
++#else
++#define dump_irq_status()
++#endif
++
++#endif /* PIC8259_H */
+diff -Naur grub-0.97.orig/netboot/pnic.c grub-0.97/netboot/pnic.c
+--- grub-0.97.orig/netboot/pnic.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pnic.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,267 @@
++/**************************************************************************
++Etherboot -  BOOTP/TFTP Bootstrap Program
++Bochs Pseudo NIC driver for Etherboot
++***************************************************************************/
++
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2, or (at
++ * your option) any later version.
++ *
++ * See pnic_api.h for an explanation of the Bochs Pseudo NIC.
++ */
++
++/* to get some global routines like printf */
++#include "etherboot.h"
++/* to get the interface to the body of the program */
++#include "nic.h"
++/* to get the PCI support functions, if this is a PCI NIC */
++#include "pci.h"
++
++/* PNIC API */
++#include "pnic_api.h"
++
++/* Private data structure */
++typedef struct {
++	uint16_t api_version;
++} pnic_priv_data_t;
++
++/* Function prototypes */
++static int pnic_api_check ( uint16_t api_version );
++
++/* NIC specific static variables go here */
++static uint8_t tx_buffer[ETH_FRAME_LEN];
++
++/* 
++ * Utility functions: issue a PNIC command, retrieve result.  Use
++ * pnic_command_quiet if you don't want failure codes to be
++ * automatically printed.  Returns the PNIC status code.
++ * 
++ * Set output_length to NULL only if you expect to receive exactly
++ * output_max_length bytes, otherwise it'll complain that you didn't
++ * get enough data (on the assumption that if you not interested in
++ * discovering the output length then you're expecting a fixed amount
++ * of data).
++ */
++
++static uint16_t pnic_command_quiet ( struct nic *nic, uint16_t command,
++				     void *input, uint16_t input_length,
++				     void *output, uint16_t output_max_length,
++				     uint16_t *output_length ) {
++	int i;
++	uint16_t status;
++	uint16_t _output_length;
++
++	if ( input != NULL ) {
++		/* Write input length */
++		outw ( input_length, nic->ioaddr + PNIC_REG_LEN );
++		/* Write input data */
++		for ( i = 0; i < input_length; i++ ) {
++			outb( ((char*)input)[i], nic->ioaddr + PNIC_REG_DATA );
++		}
++	}
++	/* Write command */
++	outw ( command, nic->ioaddr + PNIC_REG_CMD );
++	/* Retrieve status */
++	status = inw ( nic->ioaddr + PNIC_REG_STAT );
++	/* Retrieve output length */
++	_output_length = inw ( nic->ioaddr + PNIC_REG_LEN );
++	if ( output_length == NULL ) {
++		if ( _output_length != output_max_length ) {
++			printf ( "pnic_command %#hx: wrong data length "
++				 "returned (expected %d, got %d)\n", command,
++				 output_max_length, _output_length );
++		}
++	} else {
++		*output_length = _output_length;
++	}
++	if ( output != NULL ) {
++		if ( _output_length > output_max_length ) {
++			printf ( "pnic_command %#hx: output buffer too small "
++				 "(have %d, need %d)\n", command,
++				 output_max_length, _output_length );
++			_output_length = output_max_length;
++		}
++		/* Retrieve output data */
++		for ( i = 0; i < _output_length; i++ ) {
++			((char*)output)[i] =
++				inb ( nic->ioaddr + PNIC_REG_DATA );
++		}
++	}
++	return status;
++}
++
++static uint16_t pnic_command ( struct nic *nic, uint16_t command,
++			       void *input, uint16_t input_length,
++			       void *output, uint16_t output_max_length,
++			       uint16_t *output_length ) {
++	pnic_priv_data_t *priv = (pnic_priv_data_t*)nic->priv_data;
++	uint16_t status = pnic_command_quiet ( nic, command,
++					       input, input_length,
++					       output, output_max_length,
++					       output_length );
++	if ( status == PNIC_STATUS_OK ) return status;
++	printf ( "PNIC command %#hx (len %#hx) failed with status %#hx\n",
++		 command, input_length, status );
++	if ( priv->api_version ) pnic_api_check(priv->api_version);
++	return status;
++}
++
++/* Check API version matches that of NIC */
++static int pnic_api_check ( uint16_t api_version ) {
++	if ( api_version != PNIC_API_VERSION ) {
++		printf ( "Warning: API version mismatch! "
++			 "(NIC's is %d.%d, ours is %d.%d)\n",
++			 api_version >> 8, api_version & 0xff,
++			 PNIC_API_VERSION >> 8, PNIC_API_VERSION & 0xff );
++	}
++	if ( api_version < PNIC_API_VERSION ) {
++		printf ( "*** You may need to update your copy of Bochs ***\n" );
++	}
++	return ( api_version == PNIC_API_VERSION );
++}
++
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int pnic_poll(struct nic *nic, int retrieve)
++{
++	uint16_t length;
++	uint16_t qlen;
++
++	/* Check receive queue length to see if there's anything to
++	 * get.  Necessary since once we've called PNIC_CMD_RECV we
++	 * have to read out the packet, otherwise it's lost forever.
++	 */
++	if ( pnic_command ( nic, PNIC_CMD_RECV_QLEN, NULL, 0,
++			    &qlen, sizeof(qlen), NULL )
++	     != PNIC_STATUS_OK ) return ( 0 );
++	if ( qlen == 0 ) return ( 0 );
++
++	/* There is a packet ready.  Return 1 if we're only checking. */
++	if ( ! retrieve ) return ( 1 );
++
++	/* Retrieve the packet */
++	if ( pnic_command ( nic, PNIC_CMD_RECV, NULL, 0,
++			    nic->packet, ETH_FRAME_LEN, &length )
++	     != PNIC_STATUS_OK ) return ( 0 );
++	nic->packetlen = length;
++	return ( 1 );
++}
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void pnic_transmit(
++	struct nic *nic,
++	const char *dest,		/* Destination */
++	unsigned int type,		/* Type */
++	unsigned int size,		/* size */
++	const char *data)		/* Packet */
++{
++	unsigned int nstype = htons ( type );
++
++	if ( ( ETH_HLEN + size ) >= ETH_FRAME_LEN ) {
++		printf ( "pnic_transmit: packet too large\n" );
++		return;
++	}
++
++	/* Assemble packet */
++	memcpy ( tx_buffer, dest, ETH_ALEN );
++	memcpy ( tx_buffer + ETH_ALEN, nic->node_addr, ETH_ALEN );
++	memcpy ( tx_buffer + 2 * ETH_ALEN, &nstype, 2 );
++	memcpy ( tx_buffer + ETH_HLEN, data, size );
++
++	pnic_command ( nic, PNIC_CMD_XMIT, tx_buffer, ETH_HLEN + size,
++		       NULL, 0, NULL );
++}
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void pnic_disable(struct dev *dev)
++{
++	struct nic *nic = (struct nic *)dev;
++	pnic_command ( nic, PNIC_CMD_RESET, NULL, 0, NULL, 0, NULL );
++}
++
++/**************************************************************************
++IRQ - Handle card interrupt status
++***************************************************************************/
++static void pnic_irq ( struct nic *nic, irq_action_t action )
++{
++	uint8_t enabled;
++
++	switch ( action ) {
++	case DISABLE :
++	case ENABLE :
++		enabled = ( action == ENABLE ? 1 : 0 );
++		pnic_command ( nic, PNIC_CMD_MASK_IRQ,
++			       &enabled, sizeof(enabled), NULL, 0, NULL );
++		break;
++	case FORCE :
++		pnic_command ( nic, PNIC_CMD_FORCE_IRQ,
++			       NULL, 0, NULL, 0, NULL );
++		break;
++	}
++}
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++***************************************************************************/
++
++static int pnic_probe(struct dev *dev, struct pci_device *pci)
++{
++	struct nic *nic = (struct nic *)dev;
++	static pnic_priv_data_t priv;
++	uint16_t status;
++
++	printf(" - ");
++
++	/* Clear private data structure and chain it in */
++	memset ( &priv, 0, sizeof(priv) );
++	nic->priv_data = &priv;
++
++	/* Mask the bit that says "this is an io addr" */
++	nic->ioaddr = pci->ioaddr & ~3;
++	nic->irqno = pci->irq;
++	/* Not sure what this does, but the rtl8139 driver does it */
++	adjust_pci_device(pci);
++
++	status = pnic_command_quiet( nic, PNIC_CMD_API_VER, NULL, 0,
++				     &priv.api_version,
++				     sizeof(priv.api_version), NULL );
++	if ( status != PNIC_STATUS_OK ) {
++		printf ( "PNIC failed installation check, code %#hx\n",
++			 status );
++		return 0;
++	}
++	pnic_api_check(priv.api_version);
++	status = pnic_command ( nic, PNIC_CMD_READ_MAC, NULL, 0,
++				nic->node_addr, ETH_ALEN, NULL );
++	printf ( "Detected Bochs Pseudo NIC MAC %! (API v%d.%d) at %#hx\n",
++		 nic->node_addr, priv.api_version>>8, priv.api_version&0xff,
++		 nic->ioaddr );
++
++	/* point to NIC specific routines */
++	dev->disable  = pnic_disable;
++	nic->poll     = pnic_poll;
++	nic->transmit = pnic_transmit;
++	nic->irq      = pnic_irq;
++	return 1;
++}
++
++static struct pci_id pnic_nics[] = {
++/* genrules.pl doesn't let us use macros for PCI IDs...*/
++PCI_ROM(0xfefe, 0xefef, "pnic", "Bochs Pseudo NIC Adaptor"),
++};
++
++struct pci_driver pnic_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "PNIC",
++	.probe    = pnic_probe,
++	.ids      = pnic_nics,
++	.id_count = sizeof(pnic_nics)/sizeof(pnic_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/pnic_api.h grub-0.97/netboot/pnic_api.h
+--- grub-0.97.orig/netboot/pnic_api.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pnic_api.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,59 @@
++/*
++ * Constants etc. for the Bochs/Etherboot pseudo-NIC
++ * 
++ * This header file must be valid C and C++.
++ *
++ * Operation of the pseudo-NIC (PNIC) is pretty simple.  To write a
++ * command plus data, first write the length of the data to
++ * PNIC_REG_LEN, then write the data a byte at a type to
++ * PNIC_REG_DATA, then write the command code to PNIC_REG_CMD.  The
++ * status will be available from PNIC_REG_STAT.  The length of any
++ * data returned will be in PNIC_REG_LEN and can be read a byte at a
++ * time from PNIC_REG_DATA.
++ */
++
++/*
++ * PCI parameters
++ */
++#define PNIC_PCI_VENDOR	0xfefe	/* Hopefully these won't clash with */
++#define PNIC_PCI_DEVICE 0xefef	/* any real PCI device IDs.         */
++
++/*
++ * 'Hardware' register addresses, offset from io_base
++ */
++#define PNIC_REG_CMD	0x00	/* Command register, 2 bytes, write only */
++#define PNIC_REG_STAT	0x00	/* Status register, 2 bytes, read only */
++#define PNIC_REG_LEN	0x02	/* Length register, 2 bytes, read-write */
++#define PNIC_REG_DATA	0x04	/* Data port, 1 byte, read-write */
++/*
++ * PNIC_MAX_REG used in Bochs to claim i/o space
++ */
++#define PNIC_MAX_REG	0x04
++
++/*
++ * Command code definitions: write these into PNIC_REG_CMD
++ */
++#define PNIC_CMD_NOOP		0x0000
++#define PNIC_CMD_API_VER	0x0001
++#define PNIC_CMD_READ_MAC	0x0002
++#define PNIC_CMD_RESET		0x0003
++#define PNIC_CMD_XMIT		0x0004
++#define PNIC_CMD_RECV		0x0005
++#define PNIC_CMD_RECV_QLEN	0x0006
++#define PNIC_CMD_MASK_IRQ	0x0007
++#define PNIC_CMD_FORCE_IRQ	0x0008
++
++/*
++ * Status code definitions: read these from PNIC_REG_STAT
++ *
++ * We avoid using status codes that might be confused with
++ * randomly-read data (e.g. 0x0000, 0xffff etc.)
++ */
++#define PNIC_STATUS_OK		0x4f4b		/* 'OK' */
++#define PNIC_STATUS_UNKNOWN_CMD	0x3f3f		/* '??' */
++
++/*
++ * Other miscellaneous information
++ */
++
++#define PNIC_API_VERSION	0x0101		/* 1.1 */
+diff -Naur grub-0.97.orig/netboot/pxe.h grub-0.97/netboot/pxe.h
+--- grub-0.97.orig/netboot/pxe.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/pxe.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,521 @@
++/*
++ * Copyright (c) 2000 Alfred Perlstein <alfred@freebsd.org>
++ * All rights reserved.
++ * Copyright (c) 2000 Paul Saab <ps@freebsd.org>
++ * All rights reserved.
++ * Copyright (c) 2000 John Baldwin <jhb@freebsd.org>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ * SUCH DAMAGE.
++ *
++ * $FreeBSD: src/sys/boot/i386/libi386/pxe.h,v 1.4.2.2 2000/09/10 02:52:18 ps Exp $
++ */
++
++/*
++ * The typedefs and structures declared in this file
++ * clearly violate style(9), the reason for this is to conform to the
++ * typedefs/structure-names used in the Intel literature to avoid confusion.
++ *
++ * It's for your own good. :)
++ */
++
++/* SEGOFF16_t defined in separate header for Etherboot
++ */
++#include <segoff.h>
++
++/* It seems that intel didn't think about ABI,
++ * either that or 16bit ABI != 32bit ABI (which seems reasonable)
++ * I have to thank Intel for the hair loss I incurred trying to figure
++ * out why PXE was mis-reading structures I was passing it (at least
++ * from my point of view)
++ *
++ * Solution: use gcc's '__attribute__ ((packed))' to correctly align
++ * structures passed into PXE
++ * Question: does this really work for PXE's expected ABI?
++ */
++#define	PACKED		__attribute__ ((packed))
++
++#define	S_SIZE(s)	s, sizeof(s) - 1
++
++#define	IP_STR		"%d.%d.%d.%d"
++#define	IP_ARGS(ip)					\
++	(int)(ip >> 24) & 0xff, (int)(ip >> 16) & 0xff, \
++	(int)(ip >> 8) & 0xff, (int)ip & 0xff
++
++#define	MAC_STR		"%02x:%02x:%02x:%02x:%02x:%02x"
++#define	MAC_ARGS(mac)					\
++	mac[0], mac[1], mac[2], mac[3], mac[4], mac[5] 
++
++#define	PXENFSROOTPATH	"/pxeroot"
++
++typedef struct {
++	uint16_t		Seg_Addr;
++	uint32_t		Phy_Addr;
++	uint16_t		Seg_Size;
++} PACKED SEGDESC_t; /* PACKED is required, otherwise gcc pads this out to 12
++		       bytes - mbrown@fensystems.co.uk (mcb30) 17/5/03 */
++
++typedef	uint16_t		SEGSEL_t;
++typedef	uint16_t		PXENV_STATUS_t;
++typedef	uint32_t		IP4_t;
++typedef	uint32_t		ADDR32_t;
++typedef	uint16_t		UDP_PORT_t;
++
++#define	MAC_ADDR_LEN		16
++typedef	uint8_t			MAC_ADDR[MAC_ADDR_LEN];
++
++/* PXENV+ */
++typedef struct {
++	uint8_t		Signature[6];	/* 'PXENV+' */
++	uint16_t	Version;	/* MSB = major, LSB = minor */
++	uint8_t		Length;		/* structure length */
++	uint8_t		Checksum;	/* checksum pad */
++	SEGOFF16_t	RMEntry;	/* SEG:OFF to PXE entry point */
++	/* don't use PMOffset and PMSelector (from the 2.1 PXE manual) */
++	uint32_t	PMOffset;	/* Protected mode entry */
++	SEGSEL_t	PMSelector;	/* Protected mode selector */
++	SEGSEL_t	StackSeg;	/* Stack segment address */
++	uint16_t	StackSize;	/* Stack segment size (bytes) */
++	SEGSEL_t	BC_CodeSeg;	/* BC Code segment address */
++	uint16_t	BC_CodeSize;	/* BC Code segment size (bytes) */
++	SEGSEL_t	BC_DataSeg;	/* BC Data segment address */
++	uint16_t	BC_DataSize;	/* BC Data segment size (bytes) */
++	SEGSEL_t	UNDIDataSeg;	/* UNDI Data segment address */
++	uint16_t	UNDIDataSize;	/* UNDI Data segment size (bytes) */
++	SEGSEL_t	UNDICodeSeg;	/* UNDI Code segment address */
++	uint16_t	UNDICodeSize;	/* UNDI Code segment size (bytes) */
++	SEGOFF16_t	PXEPtr;		/* SEG:OFF to !PXE struct, 
++					   only present when Version > 2.1 */
++} PACKED pxenv_t;
++
++/* !PXE */
++typedef struct {
++	uint8_t		Signature[4];
++	uint8_t		StructLength;
++	uint8_t		StructCksum;
++	uint8_t		StructRev;
++	uint8_t		reserved_1;
++	SEGOFF16_t	UNDIROMID;
++	SEGOFF16_t	BaseROMID;
++	SEGOFF16_t	EntryPointSP;
++	SEGOFF16_t	EntryPointESP;
++	SEGOFF16_t	StatusCallout;
++	uint8_t		reserved_2;
++	uint8_t		SegDescCn;
++	SEGSEL_t	FirstSelector;
++	SEGDESC_t	Stack;
++	SEGDESC_t	UNDIData;
++	SEGDESC_t	UNDICode;
++	SEGDESC_t	UNDICodeWrite;
++	SEGDESC_t	BC_Data;
++	SEGDESC_t	BC_Code;
++	SEGDESC_t	BC_CodeWrite;
++} PACKED pxe_t;
++
++#define	PXENV_START_UNDI		0x0000
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint16_t	ax;
++	uint16_t	bx;
++	uint16_t	dx;
++	uint16_t	di;
++	uint16_t	es;
++} PACKED t_PXENV_START_UNDI;
++
++#define	PXENV_UNDI_STARTUP		0x0001
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_STARTUP;
++
++#define	PXENV_UNDI_CLEANUP		0x0002
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_CLEANUP;
++
++#define	PXENV_UNDI_INITIALIZE		0x0003
++typedef struct {
++	PXENV_STATUS_t	Status;
++	ADDR32_t	ProtocolIni;	/* Phys addr of a copy of the driver module */
++	uint8_t		reserved[8];
++} PACKED t_PXENV_UNDI_INITIALIZE;
++
++
++#define	MAXNUM_MCADDR		8
++typedef struct {
++	uint16_t	MCastAddrCount;
++	MAC_ADDR	McastAddr[MAXNUM_MCADDR];
++} PACKED t_PXENV_UNDI_MCAST_ADDRESS;
++
++#define	PXENV_UNDI_RESET_ADAPTER	0x0004		
++typedef struct {
++	PXENV_STATUS_t	Status;
++	t_PXENV_UNDI_MCAST_ADDRESS R_Mcast_Buf;
++} PACKED t_PXENV_UNDI_RESET;
++
++#define	PXENV_UNDI_SHUTDOWN		0x0005
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_SHUTDOWN;
++
++#define	PXENV_UNDI_OPEN			0x0006
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint16_t	OpenFlag;
++	uint16_t	PktFilter;
++#	define FLTR_DIRECTED	0x0001
++#	define FLTR_BRDCST	0x0002
++#	define FLTR_PRMSCS	0x0003
++#	define FLTR_SRC_RTG	0x0004
++
++	t_PXENV_UNDI_MCAST_ADDRESS R_Mcast_Buf;
++} PACKED t_PXENV_UNDI_OPEN;
++
++#define	PXENV_UNDI_CLOSE		0x0007
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_CLOSE;
++
++#define	PXENV_UNDI_TRANSMIT		0x0008
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint8_t		Protocol;
++#	define P_UNKNOWN	0
++#	define P_IP		1
++#	define P_ARP		2
++#	define P_RARP		3
++
++	uint8_t		XmitFlag;
++#	define XMT_DESTADDR	0x0000
++#	define XMT_BROADCAST	0x0001
++
++	SEGOFF16_t	DestAddr;
++	SEGOFF16_t	TBD;
++	uint32_t	Reserved[2];
++} PACKED t_PXENV_UNDI_TRANSMIT;
++
++#define	MAX_DATA_BLKS		8
++typedef struct {
++	uint16_t	ImmedLength;
++	SEGOFF16_t	Xmit;
++	uint16_t	DataBlkCount;
++	struct	DataBlk {
++		uint8_t		TDPtrType;
++		uint8_t		TDRsvdByte;
++		uint16_t	TDDataLen;
++		SEGOFF16_t	TDDataPtr;
++	} DataBlock[MAX_DATA_BLKS];
++} PACKED t_PXENV_UNDI_TBD;
++
++#define	PXENV_UNDI_SET_MCAST_ADDRESS	0x0009
++typedef struct {
++	PXENV_STATUS_t	Status;
++	t_PXENV_UNDI_MCAST_ADDRESS R_Mcast_Buf;
++} PACKED t_PXENV_UNDI_SET_MCAST_ADDR;
++
++#define	PXENV_UNDI_SET_STATION_ADDRESS	0x000A
++typedef struct {
++	PXENV_STATUS_t	Status;
++	MAC_ADDR	StationAddress;		/* Temp MAC addres to use */
++} PACKED t_PXENV_UNDI_SET_STATION_ADDRESS;
++
++#define	PXENV_UNDI_SET_PACKET_FILTER	0x000B
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint8_t		filter;			/* see UNDI_OPEN (0x0006) */
++} PACKED t_PXENV_UNDI_SET_PACKET_FILTER;
++
++#define	PXENV_UNDI_GET_INFORMATION	0x000C
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint16_t	BaseIo;			/* Adapter base I/O address */
++	uint16_t	IntNumber;		/* Adapter IRQ number */
++	uint16_t	MaxTranUnit;		/* Adapter maximum transmit unit */
++	uint16_t	HwType;			/* Type of protocol at the hardware addr */
++#	define ETHER_TYPE	1
++#	define EXP_ETHER_TYPE	2
++#	define IEEE_TYPE	6
++#	define ARCNET_TYPE	7
++
++	uint16_t	HwAddrLen;		/* Length of hardware address */
++	MAC_ADDR	CurrentNodeAddress;	/* Current hardware address */
++	MAC_ADDR	PermNodeAddress;	/* Permanent hardware address */
++	SEGSEL_t	ROMAddress;		/* Real mode ROM segment address */
++	uint16_t	RxBufCt;		/* Receive queue length */
++	uint16_t	TxBufCt;		/* Transmit queue length */
++} PACKED t_PXENV_UNDI_GET_INFORMATION;
++
++#define	PXENV_UNDI_GET_STATISTICS	0x000D
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint32_t	XmitGoodFrames;		/* Number of successful transmissions */
++	uint32_t	RcvGoodFrames;		/* Number of good frames received */
++	uint32_t	RcvCRCErrors;		/* Number of frames with CRC errors */
++	uint32_t	RcvResourceErrors;	/* Number of frames dropped */
++} PACKED t_PXENV_UNDI_GET_STATISTICS;
++
++#define	PXENV_UNDI_CLEAR_STATISTICS	0x000E
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_CLEAR_STATISTICS;
++
++#define	PXENV_UNDI_INITIATE_DIAGS	0x000F
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_INITIATE_DIAGS;
++
++#define	PXENV_UNDI_FORCE_INTERRUPT	0x0010
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_UNDI_FORCE_INTERRUPT;
++
++#define	PXENV_UNDI_GET_MCAST_ADDRESS	0x0011
++typedef struct {
++	PXENV_STATUS_t	Status;
++	IP4_t		InetAddr;		/* IP mulicast address */
++	MAC_ADDR	MediaAddr;		/* MAC multicast address */
++} PACKED t_PXENV_UNDI_GET_MCAST_ADDR;
++
++#define	PXENV_UNDI_GET_NIC_TYPE		0x0012
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint8_t		NicType;		/* Type of NIC */
++#	define PCI_NIC		2
++#	define PnP_NIC		3
++#	define CardBus_NIC	4
++
++	union {
++		struct {
++			uint16_t	Vendor_ID;
++			uint16_t	Dev_ID;
++			uint8_t		Base_Class;
++			uint8_t		Sub_Class;
++			uint8_t		Prog_Intf;
++			uint8_t		Rev;
++			uint16_t	BusDevFunc;
++			uint16_t	SubVendor_ID;
++			uint16_t	SubDevice_ID;
++		} pci, cardbus;
++		struct {
++			uint32_t	EISA_Dev_ID;
++			uint8_t		Base_Class;
++			uint8_t		Sub_Class;
++			uint8_t		Prog_Intf;
++			uint16_t	CardSelNum;
++		} pnp;
++	} info;
++} PACKED t_PXENV_UNDI_GET_NIC_TYPE;
++
++#define	PXENV_UNDI_GET_IFACE_INFO	0x0013
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint8_t		IfaceType[16];		/* Name of MAC type in ASCII. */
++	uint32_t	LinkSpeed;		/* Defined in NDIS 2.0 spec */
++	uint32_t	ServiceFlags;		/* Defined in NDIS 2.0 spec */
++	uint32_t	Reserved[4];		/* must be 0 */
++} PACKED t_PXENV_UNDI_GET_IFACE_INFO;
++
++#define	PXENV_UNDI_ISR			0x0014
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint16_t	FuncFlag;		/* PXENV_UNDI_ISR_OUT_xxx */
++	uint16_t	BufferLength;		/* Length of Frame */
++	uint16_t	FrameLength;		/* Total length of reciever frame */
++	uint16_t	FrameHeaderLength;	/* Length of the media header in Frame */
++	SEGOFF16_t	Frame;			/* receive buffer */
++	uint8_t		ProtType;		/* Protocol type */
++	uint8_t		PktType;		/* Packet Type */
++#	define PXENV_UNDI_ISR_IN_START		1
++#	define PXENV_UNDI_ISR_IN_PROCESS	2
++#	define PXENV_UNDI_ISR_IN_GET_NEXT	3
++
++	/* one of these will be returned for PXENV_UNDI_ISR_IN_START */
++#	define PXENV_UNDI_ISR_OUT_OURS		0
++#	define PXENV_UNDI_ISR_OUT_NOT_OURS	1
++
++	/*
++	 * one of these will bre returnd for PXEND_UNDI_ISR_IN_PROCESS
++	 * and PXENV_UNDI_ISR_IN_GET_NEXT
++	 */
++#	define PXENV_UNDI_ISR_OUT_DONE		0
++#	define PXENV_UNDI_ISR_OUT_TRANSMIT	2
++#	define PXENV_UNDI_ISR_OUT_RECEIVE	3
++#	define PXENV_UNDI_ISR_OUT_BUSY		4
++} PACKED t_PXENV_UNDI_ISR;
++
++#define	PXENV_STOP_UNDI			0x0015
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_STOP_UNDI;
++
++#define	PXENV_TFTP_OPEN			0x0020
++typedef struct {
++	PXENV_STATUS_t	Status;
++	IP4_t		ServerIPAddress;
++	IP4_t		GatewayIPAddress;
++	uint8_t		FileName[128];
++	UDP_PORT_t	TFTPPort;
++	uint16_t	PacketSize;
++} PACKED t_PXENV_TFTP_OPEN;
++
++#define	PXENV_TFTP_CLOSE		0x0021
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_TFTP_CLOSE;
++
++#define	PXENV_TFTP_READ			0x0022
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint16_t	PacketNumber;
++	uint16_t	BufferSize;
++	SEGOFF16_t	Buffer;
++} PACKED t_PXENV_TFTP_READ;
++
++#define	PXENV_TFTP_READ_FILE		0x0023
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint8_t		FileName[128];
++	uint32_t	BufferSize;
++	ADDR32_t	Buffer;
++	IP4_t		ServerIPAddress;
++	IP4_t		GatewayIPAdress;
++	IP4_t		McastIPAdress;
++	UDP_PORT_t	TFTPClntPort;
++	UDP_PORT_t	TFTPSrvPort;
++	uint16_t	TFTPOpenTimeOut;
++	uint16_t	TFTPReopenDelay;
++} PACKED t_PXENV_TFTP_READ_FILE;
++
++#define	PXENV_TFTP_GET_FSIZE		0x0025
++typedef struct {
++	PXENV_STATUS_t	Status;
++	IP4_t		ServerIPAddress;
++	IP4_t		GatewayIPAdress;
++	uint8_t		FileName[128];
++	uint32_t	FileSize;
++} PACKED t_PXENV_TFTP_GET_FSIZE;
++
++#define	PXENV_UDP_OPEN			0x0030
++typedef struct {
++	PXENV_STATUS_t	Status;
++	IP4_t		src_ip;		/* IP address of this station */
++} PACKED t_PXENV_UDP_OPEN;
++
++#define	PXENV_UDP_CLOSE			0x0031
++typedef struct {
++	PXENV_STATUS_t	status;
++} PACKED t_PXENV_UDP_CLOSE;
++
++#define	PXENV_UDP_READ			0x0032
++typedef struct {
++	PXENV_STATUS_t	status;
++	IP4_t		src_ip;		/* IP of sender */
++	IP4_t		dest_ip;	/* Only accept packets sent to this IP */
++	UDP_PORT_t	s_port;		/* UDP source port of sender */
++	UDP_PORT_t	d_port;		/* Only accept packets sent to this port */
++	uint16_t	buffer_size;	/* Size of the packet buffer */
++	SEGOFF16_t	buffer;		/* SEG:OFF to the packet buffer */
++} PACKED t_PXENV_UDP_READ;
++
++#define	PXENV_UDP_WRITE			0x0033
++typedef struct {
++	PXENV_STATUS_t	status;
++	IP4_t		ip;		/* dest ip addr */
++	IP4_t		gw;		/* ip gateway */
++	UDP_PORT_t	src_port;	/* source udp port */
++	UDP_PORT_t	dst_port;	/* destination udp port */
++	uint16_t	buffer_size;	/* Size of the packet buffer */
++	SEGOFF16_t	buffer;		/* SEG:OFF to the packet buffer */
++} PACKED t_PXENV_UDP_WRITE;
++
++#define	PXENV_UNLOAD_STACK		0x0070
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint8_t		reserved[10];
++} PACKED t_PXENV_UNLOAD_STACK;
++
++
++#define	PXENV_GET_CACHED_INFO		0x0071
++typedef struct {
++	PXENV_STATUS_t	Status;
++	uint16_t	PacketType;	/* type (defined right here) */
++#	define PXENV_PACKET_TYPE_DHCP_DISCOVER  1
++#	define PXENV_PACKET_TYPE_DHCP_ACK       2
++#	define PXENV_PACKET_TYPE_BINL_REPLY     3
++	uint16_t	BufferSize;	/* max to copy, leave at 0 for pointer */
++	SEGOFF16_t	Buffer;		/* copy to, leave at 0 for pointer */
++	uint16_t	BufferLimit;	/* max size of buffer in BC dataseg ? */
++} PACKED t_PXENV_GET_CACHED_INFO;
++
++
++/* structure filled in by PXENV_GET_CACHED_INFO 
++ * (how we determine which IP we downloaded the initial bootstrap from)
++ * words can't describe...
++ */
++typedef struct {
++	uint8_t		opcode;
++#	define BOOTP_REQ	1
++#	define BOOTP_REP	2
++	uint8_t		Hardware;	/* hardware type */
++	uint8_t		Hardlen;	/* hardware addr len */
++	uint8_t		Gatehops;	/* zero it */
++	uint32_t	ident;		/* random number chosen by client */
++	uint16_t	seconds;	/* seconds since did initial bootstrap */
++	uint16_t	Flags;		/* seconds since did initial bootstrap */
++#	define BOOTP_BCAST	0x8000		/* ? */
++	IP4_t		cip;		/* Client IP */
++	IP4_t		yip;		/* Your IP */
++	IP4_t		sip;		/* IP to use for next boot stage */
++	IP4_t		gip;		/* Relay IP ? */
++	MAC_ADDR	CAddr;		/* Client hardware address */
++	uint8_t		Sname[64];	/* Server's hostname (Optional) */
++	uint8_t		bootfile[128];	/* boot filename */
++	union {
++#		if 1
++#		define BOOTP_DHCPVEND  1024    /* DHCP extended vendor field size */
++#		else
++#		define BOOTP_DHCPVEND  312	/* DHCP standard vendor field size */
++#		endif
++		uint8_t		d[BOOTP_DHCPVEND];	/* raw array of vendor/dhcp options */
++		struct {
++			uint8_t		magic[4];	/* DHCP magic cookie */
++#			ifndef		VM_RFC1048
++#			define		VM_RFC1048	0x63825363L	/* ? */
++#			endif
++			uint32_t	flags;		/* bootp flags/opcodes */
++			uint8_t		pad[56];	/* I don't think intel knows what a
++							   union does... */
++		} v;
++	} vendor;
++} PACKED BOOTPLAYER;
++
++#define	PXENV_RESTART_TFTP		0x0073
++#define	t_PXENV_RESTART_TFTP		t_PXENV_TFTP_READ_FILE
++
++#define	PXENV_START_BASE		0x0075
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_START_BASE;
++
++#define	PXENV_STOP_BASE			0x0076
++typedef struct {
++	PXENV_STATUS_t	Status;
++} PACKED t_PXENV_STOP_BASE;
+diff -Naur grub-0.97.orig/netboot/r8169.c grub-0.97/netboot/r8169.c
+--- grub-0.97.orig/netboot/r8169.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/r8169.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,854 @@
++/**************************************************************************
++*    r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit
++*    Written 2003 by Timothy Legge <tlegge@rogers.com>
++*
++*    This program is free software; you can redistribute it and/or modify
++*    it under the terms of the GNU General Public License as published by
++*    the Free Software Foundation; either version 2 of the License, or
++*    (at your option) any later version.
++*
++*    This program is distributed in the hope that it will be useful,
++*    but WITHOUT ANY WARRANTY; without even the implied warranty of
++*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++*    GNU General Public License for more details.
++*
++*    You should have received a copy of the GNU General Public License
++*    along with this program; if not, write to the Free Software
++*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*
++*    Portions of this code based on:
++*	r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver 
++* 		for Linux kernel 2.4.x.
++*
++*    Written 2002 ShuChen <shuchen@realtek.com.tw>
++*	  See Linux Driver for full information
++*	
++*    Linux Driver Version 1.27a, 10.02.2002
++* 
++*    Thanks to:
++*    	Jean Chen of RealTek Semiconductor Corp. for
++*    	providing the evaluation NIC used to develop 
++*    	this driver.  RealTek's support for Etherboot 
++*    	is appreciated.
++*    	
++*    REVISION HISTORY:
++*    ================
++*
++*    v1.0	11-26-2003	timlegge	Initial port of Linux driver
++*    v1.5	01-17-2004	timlegge	Initial driver output cleanup
++*    v1.6	03-27-2004	timlegge	Additional Cleanup
++*    
++*    Indent Options: indent -kr -i8
++***************************************************************************/
++
++/* to get some global routines like printf */
++#include "etherboot.h"
++/* to get the interface to the body of the program */
++#include "nic.h"
++/* to get the PCI support functions, if this is a PCI NIC */
++#include "pci.h"
++#include "timer.h"
++
++#define drv_version "v1.6"
++#define drv_date "03-27-2004"
++
++typedef unsigned char u8;
++typedef signed char s8;
++typedef unsigned short u16;
++typedef signed short s16;
++typedef unsigned int u32;
++typedef signed int s32;
++
++#define HZ 1000
++
++static u32 ioaddr;
++
++#ifdef EDEBUG
++#define dprintf(x) printf x
++#else
++#define dprintf(x)
++#endif
++
++/* Condensed operations for readability. */
++#define virt_to_le32desc(addr)  cpu_to_le32(virt_to_bus(addr))
++#define le32desc_to_virt(addr)  bus_to_virt(le32_to_cpu(addr))
++
++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
++
++/* media options 
++        _10_Half = 0x01,
++        _10_Full = 0x02,
++        _100_Half = 0x04,
++        _100_Full = 0x08,
++        _1000_Full = 0x10,
++*/
++static int media = -1;
++
++#if 0
++/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
++static int max_interrupt_work = 20;
++#endif
++
++#if 0
++/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
++   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
++static int multicast_filter_limit = 32;
++#endif
++
++/* MAC address length*/
++#define MAC_ADDR_LEN	6
++
++/* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/
++#define MAX_ETH_FRAME_SIZE	1536
++
++#define TX_FIFO_THRESH 256	/* In bytes */
++
++#define RX_FIFO_THRESH	7	/* 7 means NO threshold, Rx buffer level before first PCI xfer.  */
++#define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
++#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
++#define EarlyTxThld 	0x3F	/* 0x3F means NO early transmit */
++#define RxPacketMaxSize	0x0800	/* Maximum size supported is 16K-1 */
++#define InterFrameGap	0x03	/* 3 means InterFrameGap = the shortest one */
++
++#define NUM_TX_DESC	1	/* Number of Tx descriptor registers */
++#define NUM_RX_DESC	4	/* Number of Rx descriptor registers */
++#define RX_BUF_SIZE	1536	/* Rx Buffer size */
++
++#define RTL_MIN_IO_SIZE 0x80
++#define TX_TIMEOUT  (6*HZ)
++
++/* write/read MMIO register */
++#define RTL_W8(reg, val8)	writeb ((val8), ioaddr + (reg))
++#define RTL_W16(reg, val16)	writew ((val16), ioaddr + (reg))
++#define RTL_W32(reg, val32)	writel ((val32), ioaddr + (reg))
++#define RTL_R8(reg)		readb (ioaddr + (reg))
++#define RTL_R16(reg)		readw (ioaddr + (reg))
++#define RTL_R32(reg)		((unsigned long) readl (ioaddr + (reg)))
++
++enum RTL8169_registers {
++	MAC0 = 0,		/* Ethernet hardware address. */
++	MAR0 = 8,		/* Multicast filter. */
++	TxDescStartAddr = 0x20,
++	TxHDescStartAddr = 0x28,
++	FLASH = 0x30,
++	ERSR = 0x36,
++	ChipCmd = 0x37,
++	TxPoll = 0x38,
++	IntrMask = 0x3C,
++	IntrStatus = 0x3E,
++	TxConfig = 0x40,
++	RxConfig = 0x44,
++	RxMissed = 0x4C,
++	Cfg9346 = 0x50,
++	Config0 = 0x51,
++	Config1 = 0x52,
++	Config2 = 0x53,
++	Config3 = 0x54,
++	Config4 = 0x55,
++	Config5 = 0x56,
++	MultiIntr = 0x5C,
++	PHYAR = 0x60,
++	TBICSR = 0x64,
++	TBI_ANAR = 0x68,
++	TBI_LPAR = 0x6A,
++	PHYstatus = 0x6C,
++	RxMaxSize = 0xDA,
++	CPlusCmd = 0xE0,
++	RxDescStartAddr = 0xE4,
++	EarlyTxThres = 0xEC,
++	FuncEvent = 0xF0,
++	FuncEventMask = 0xF4,
++	FuncPresetState = 0xF8,
++	FuncForceEvent = 0xFC,
++};
++
++enum RTL8169_register_content {
++	/*InterruptStatusBits */
++	SYSErr = 0x8000,
++	PCSTimeout = 0x4000,
++	SWInt = 0x0100,
++	TxDescUnavail = 0x80,
++	RxFIFOOver = 0x40,
++	RxUnderrun = 0x20,
++	RxOverflow = 0x10,
++	TxErr = 0x08,
++	TxOK = 0x04,
++	RxErr = 0x02,
++	RxOK = 0x01,
++
++	/*RxStatusDesc */
++	RxRES = 0x00200000,
++	RxCRC = 0x00080000,
++	RxRUNT = 0x00100000,
++	RxRWT = 0x00400000,
++
++	/*ChipCmdBits */
++	CmdReset = 0x10,
++	CmdRxEnb = 0x08,
++	CmdTxEnb = 0x04,
++	RxBufEmpty = 0x01,
++
++	/*Cfg9346Bits */
++	Cfg9346_Lock = 0x00,
++	Cfg9346_Unlock = 0xC0,
++
++	/*rx_mode_bits */
++	AcceptErr = 0x20,
++	AcceptRunt = 0x10,
++	AcceptBroadcast = 0x08,
++	AcceptMulticast = 0x04,
++	AcceptMyPhys = 0x02,
++	AcceptAllPhys = 0x01,
++
++	/*RxConfigBits */
++	RxCfgFIFOShift = 13,
++	RxCfgDMAShift = 8,
++
++	/*TxConfigBits */
++	TxInterFrameGapShift = 24,
++	TxDMAShift = 8,		/* DMA burst value (0-7) is shift this many bits */
++
++	/*rtl8169_PHYstatus */
++	TBI_Enable = 0x80,
++	TxFlowCtrl = 0x40,
++	RxFlowCtrl = 0x20,
++	_1000bpsF = 0x10,
++	_100bps = 0x08,
++	_10bps = 0x04,
++	LinkStatus = 0x02,
++	FullDup = 0x01,
++
++	/*GIGABIT_PHY_registers */
++	PHY_CTRL_REG = 0,
++	PHY_STAT_REG = 1,
++	PHY_AUTO_NEGO_REG = 4,
++	PHY_1000_CTRL_REG = 9,
++
++	/*GIGABIT_PHY_REG_BIT */
++	PHY_Restart_Auto_Nego = 0x0200,
++	PHY_Enable_Auto_Nego = 0x1000,
++
++	/* PHY_STAT_REG = 1; */
++	PHY_Auto_Neco_Comp = 0x0020,
++
++	/* PHY_AUTO_NEGO_REG = 4; */
++	PHY_Cap_10_Half = 0x0020,
++	PHY_Cap_10_Full = 0x0040,
++	PHY_Cap_100_Half = 0x0080,
++	PHY_Cap_100_Full = 0x0100,
++
++	/* PHY_1000_CTRL_REG = 9; */
++	PHY_Cap_1000_Full = 0x0200,
++
++	PHY_Cap_Null = 0x0,
++
++	/*_MediaType*/
++	_10_Half = 0x01,
++	_10_Full = 0x02,
++	_100_Half = 0x04,
++	_100_Full = 0x08,
++	_1000_Full = 0x10,
++
++	/*_TBICSRBit*/
++	TBILinkOK = 0x02000000,
++};
++
++static struct {
++	const char *name;
++	u8 version;		/* depend on RTL8169 docs */
++	u32 RxConfigMask;	/* should clear the bits supported by this chip */
++} rtl_chip_info[] = {
++	{
++"RTL-8169", 0x00, 0xff7e1880,},};
++
++enum _DescStatusBit {
++	OWNbit = 0x80000000,
++	EORbit = 0x40000000,
++	FSbit = 0x20000000,
++	LSbit = 0x10000000,
++};
++
++struct TxDesc {
++	u32 status;
++	u32 vlan_tag;
++	u32 buf_addr;
++	u32 buf_Haddr;
++};
++
++struct RxDesc {
++	u32 status;
++	u32 vlan_tag;
++	u32 buf_addr;
++	u32 buf_Haddr;
++};
++
++/* The descriptors for this card are required to be aligned on
++256 byte boundaries.  As the align attribute does not do more than
++16 bytes of alignment it requires some extra steps.  Add 256 to the 
++size of the array and the init_ring adjusts the alignment */
++
++/* Define the TX Descriptor */
++static u8 tx_ring[NUM_TX_DESC * sizeof(struct TxDesc) + 256];
++
++/* Create a static buffer of size RX_BUF_SZ for each
++TX Descriptor.  All descriptors point to a
++part of this buffer */
++static unsigned char txb[NUM_TX_DESC * RX_BUF_SIZE];
++
++/* Define the RX Descriptor */
++static u8 rx_ring[NUM_RX_DESC * sizeof(struct TxDesc) + 256];
++
++/* Create a static buffer of size RX_BUF_SZ for each
++RX Descriptor   All descriptors point to a
++part of this buffer */
++static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE];
++
++struct rtl8169_private {
++	void *mmio_addr;	/* memory map physical address */
++	int chipset;
++	unsigned long cur_rx;	/* Index into the Rx descriptor buffer of next Rx pkt. */
++	unsigned long cur_tx;	/* Index into the Tx descriptor buffer of next Rx pkt. */
++	unsigned char *TxDescArrays;	/* Index of Tx Descriptor buffer */
++	unsigned char *RxDescArrays;	/* Index of Rx Descriptor buffer */
++	struct TxDesc *TxDescArray;	/* Index of 256-alignment Tx Descriptor buffer */
++	struct RxDesc *RxDescArray;	/* Index of 256-alignment Rx Descriptor buffer */
++	unsigned char *RxBufferRing[NUM_RX_DESC];	/* Index of Rx Buffer array */
++	unsigned char *Tx_skbuff[NUM_TX_DESC];
++} tpx;
++
++static struct rtl8169_private *tpc;
++
++static const u16 rtl8169_intr_mask =
++    SYSErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | TxErr |
++    TxOK | RxErr | RxOK;
++static const unsigned int rtl8169_rx_config =
++    (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
++
++void mdio_write(int RegAddr, int value)
++{
++	int i;
++
++	RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
++	udelay(1000);
++
++	for (i = 2000; i > 0; i--) {
++		/* Check if the RTL8169 has completed writing to the specified MII register */
++		if (!(RTL_R32(PHYAR) & 0x80000000)) {
++			break;
++		} else {
++			udelay(100);
++		}
++	}
++}
++
++int mdio_read(int RegAddr)
++{
++	int i, value = -1;
++
++	RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
++	udelay(1000);
++
++	for (i = 2000; i > 0; i--) {
++		/* Check if the RTL8169 has completed retrieving data from the specified MII register */
++		if (RTL_R32(PHYAR) & 0x80000000) {
++			value = (int) (RTL_R32(PHYAR) & 0xFFFF);
++			break;
++		} else {
++			udelay(100);
++		}
++	}
++	return value;
++}
++
++static int rtl8169_init_board(struct pci_device *pdev)
++{
++	int i;
++	unsigned long rtreg_base, rtreg_len;
++	u32 tmp;
++
++	rtreg_base = pci_bar_start(pdev, PCI_BASE_ADDRESS_1);
++	rtreg_len = pci_bar_size(pdev, PCI_BASE_ADDRESS_1);
++
++	/* check for weird/broken PCI region reporting */
++	if (rtreg_len < RTL_MIN_IO_SIZE) {
++		printf("Invalid PCI region size(s), aborting\n");
++	}
++
++	adjust_pci_device(pdev);
++/*      pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); */
++
++	/* ioremap MMIO region */
++	ioaddr = (unsigned long) ioremap(rtreg_base, rtreg_len);
++	if (ioaddr == 0)
++		return 0;
++
++	tpc->mmio_addr = &ioaddr;
++	/* Soft reset the chip. */
++	RTL_W8(ChipCmd, CmdReset);
++
++	/* Check that the chip has finished the reset. */
++	for (i = 1000; i > 0; i--)
++		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
++			break;
++		else
++			udelay(10);
++
++	/* identify chip attached to board */
++	tmp = RTL_R32(TxConfig);
++	tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24;
++
++	for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
++		if (tmp == rtl_chip_info[i].version) {
++			tpc->chipset = i;
++			goto match;
++		}
++	/* if unknown chip, assume array element #0, original RTL-8169 in this case */
++	dprintf(("PCI device: unknown chip version, assuming RTL-8169\n"));
++	dprintf(("PCI device: TxConfig = 0x%hX\n",
++		 (unsigned long) RTL_R32(TxConfig)));
++	tpc->chipset = 0;
++	return 1;
++      match:
++	return 0;
++
++}
++
++/**************************************************************************
++IRQ - Wait for a frame
++***************************************************************************/
++void r8169_irq ( struct nic *nic __unused, irq_action_t action ) {
++	int intr_status = 0;
++	int interested = RxUnderrun | RxOverflow | RxFIFOOver | RxErr | RxOK;
++ 
++	switch ( action ) {
++		case DISABLE:
++		case ENABLE:
++			intr_status = RTL_R16(IntrStatus);
++			/* h/w no longer present (hotplug?) or major error, 
++				bail */
++			if (intr_status == 0xFFFF)
++				break;
++
++			intr_status = intr_status & ~interested;
++			if ( action == ENABLE )
++				intr_status = intr_status | interested;
++			RTL_W16(IntrMask, intr_status);
++			break;
++		case FORCE :
++			RTL_W8(TxPoll, (RTL_R8(TxPoll) | 0x01));
++			break;
++	}
++}
++
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int r8169_poll(struct nic *nic, int retreive)
++{
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++	int cur_rx;
++	unsigned int intr_status = 0;
++	cur_rx = tpc->cur_rx;
++	if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) {
++	         /* There is a packet ready */
++  	         if(!retreive)
++  	                 return 1;
++		intr_status = RTL_R16(IntrStatus);
++		/* h/w no longer present (hotplug?) or major error,
++			bail */
++		if (intr_status == 0xFFFF)
++			return 0;
++		RTL_W16(IntrStatus, intr_status & 
++			~(RxFIFOOver | RxOverflow | RxOK));
++
++		if (!(tpc->RxDescArray[cur_rx].status & RxRES)) {
++			nic->packetlen = (int) (tpc->RxDescArray[cur_rx].
++						status & 0x00001FFF) - 4;
++			memcpy(nic->packet, tpc->RxBufferRing[cur_rx],
++			       nic->packetlen);
++			if (cur_rx == NUM_RX_DESC - 1)
++				tpc->RxDescArray[cur_rx].status =
++				    (OWNbit | EORbit) + RX_BUF_SIZE;
++			else
++				tpc->RxDescArray[cur_rx].status =
++				    OWNbit + RX_BUF_SIZE;
++			tpc->RxDescArray[cur_rx].buf_addr =
++			    virt_to_bus(tpc->RxBufferRing[cur_rx]);
++		} else
++			printf("Error Rx");
++		/* FIXME: shouldn't I reset the status on an error */
++		cur_rx = (cur_rx + 1) % NUM_RX_DESC;
++		tpc->cur_rx = cur_rx;
++		RTL_W16(IntrStatus, intr_status & 
++			(RxFIFOOver | RxOverflow | RxOK));
++
++		return 1;
++
++	}
++	tpc->cur_rx = cur_rx;
++	/* FIXME: There is no reason to do this as cur_rx did not change */
++
++	return (0);		/* initially as this is called to flush the input */
++
++}
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void r8169_transmit(struct nic *nic, const char *d,	/* Destination */
++			   unsigned int t,	/* Type */
++			   unsigned int s,	/* size */
++			   const char *p)
++{				/* Packet */
++	/* send the packet to destination */
++
++	u16 nstype;
++	u32 to;
++	u8 *ptxb;
++	int entry = tpc->cur_tx % NUM_TX_DESC;
++
++	/* point to the current txb incase multiple tx_rings are used */
++	ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
++	memcpy(ptxb, d, ETH_ALEN);
++	memcpy(ptxb + ETH_ALEN, nic->node_addr, ETH_ALEN);
++	nstype = htons((u16) t);
++	memcpy(ptxb + 2 * ETH_ALEN, (u8 *) & nstype, 2);
++	memcpy(ptxb + ETH_HLEN, p, s);
++	s += ETH_HLEN;
++	s &= 0x0FFF;
++	while (s < ETH_ZLEN)
++		ptxb[s++] = '\0';
++
++	tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb);
++	if (entry != (NUM_TX_DESC - 1))
++		tpc->TxDescArray[entry].status =
++		    (OWNbit | FSbit | LSbit) | ((s > ETH_ZLEN) ? s :
++						ETH_ZLEN);
++	else
++		tpc->TxDescArray[entry].status =
++		    (OWNbit | EORbit | FSbit | LSbit) | ((s > ETH_ZLEN) ? s
++							 : ETH_ZLEN);
++	RTL_W8(TxPoll, 0x40);	/* set polling bit */
++
++	tpc->cur_tx++;
++	to = currticks() + TX_TIMEOUT;
++	while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to));	/* wait */
++
++	if (currticks() >= to) {
++		printf("TX Time Out");
++	}
++}
++
++static void rtl8169_set_rx_mode(struct nic *nic __unused)
++{
++	u32 mc_filter[2];	/* Multicast hash filter */
++	int rx_mode;
++	u32 tmp = 0;
++
++	/* IFF_ALLMULTI */
++	/* Too many to filter perfectly -- accept all multicasts. */
++	rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
++	mc_filter[1] = mc_filter[0] = 0xffffffff;
++
++	tmp =
++	    rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) &
++					   rtl_chip_info[tpc->chipset].
++					   RxConfigMask);
++
++	RTL_W32(RxConfig, tmp);
++	RTL_W32(MAR0 + 0, mc_filter[0]);
++	RTL_W32(MAR0 + 4, mc_filter[1]);
++}
++static void rtl8169_hw_start(struct nic *nic)
++{
++	u32 i;
++
++	/* Soft reset the chip. */
++	RTL_W8(ChipCmd, CmdReset);
++
++	/* Check that the chip has finished the reset. */
++	for (i = 1000; i > 0; i--) {
++		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
++			break;
++		else
++			udelay(10);
++	}
++
++	RTL_W8(Cfg9346, Cfg9346_Unlock);
++	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
++	RTL_W8(EarlyTxThres, EarlyTxThld);
++
++	/* For gigabit rtl8169 */
++	RTL_W16(RxMaxSize, RxPacketMaxSize);
++
++	/* Set Rx Config register */
++	i = rtl8169_rx_config | (RTL_R32(RxConfig) &
++				 rtl_chip_info[tpc->chipset].RxConfigMask);
++	RTL_W32(RxConfig, i);
++
++	/* Set DMA burst size and Interframe Gap Time */
++	RTL_W32(TxConfig,
++		(TX_DMA_BURST << TxDMAShift) | (InterFrameGap <<
++						TxInterFrameGapShift));
++
++
++	tpc->cur_rx = 0;
++
++	RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray));
++	RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray));
++	RTL_W8(Cfg9346, Cfg9346_Lock);
++	udelay(10);
++
++	RTL_W32(RxMissed, 0);
++
++	rtl8169_set_rx_mode(nic);
++
++	/* no early-rx interrupts */
++	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
++}
++
++static void rtl8169_init_ring(struct nic *nic __unused)
++{
++	int i;
++
++	tpc->cur_rx = 0;
++	tpc->cur_tx = 0;
++	memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc));
++	memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc));
++
++	for (i = 0; i < NUM_TX_DESC; i++) {
++		tpc->Tx_skbuff[i] = &txb[i];
++	}
++
++	for (i = 0; i < NUM_RX_DESC; i++) {
++		if (i == (NUM_RX_DESC - 1))
++			tpc->RxDescArray[i].status =
++			    (OWNbit | EORbit) + RX_BUF_SIZE;
++		else
++			tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE;
++
++		tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
++		tpc->RxDescArray[i].buf_addr =
++		    virt_to_bus(tpc->RxBufferRing[i]);
++	}
++}
++
++/**************************************************************************
++RESET - Finish setting up the ethernet interface
++***************************************************************************/
++static void r8169_reset(struct nic *nic)
++{
++	int i;
++	u8 diff;
++	u32 TxPhyAddr, RxPhyAddr;
++
++	tpc->TxDescArrays = tx_ring;
++	if (tpc->TxDescArrays == 0)
++		printf("Allot Error");
++	/* Tx Desscriptor needs 256 bytes alignment; */
++	TxPhyAddr = virt_to_bus(tpc->TxDescArrays);
++	diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8));
++	TxPhyAddr += diff;
++	tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff);
++
++	tpc->RxDescArrays = rx_ring;
++	/* Rx Desscriptor needs 256 bytes alignment; */
++	RxPhyAddr = virt_to_bus(tpc->RxDescArrays);
++	diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8));
++	RxPhyAddr += diff;
++	tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff);
++
++	if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) {
++		printf("Allocate RxDescArray or TxDescArray failed\n");
++		return;
++	}
++
++	rtl8169_init_ring(nic);
++	rtl8169_hw_start(nic);
++	/* Construct a perfect filter frame with the mac address as first match
++	 * and broadcast for all others */
++	for (i = 0; i < 192; i++)
++		txb[i] = 0xFF;
++
++	txb[0] = nic->node_addr[0];
++	txb[1] = nic->node_addr[1];
++	txb[2] = nic->node_addr[2];
++	txb[3] = nic->node_addr[3];
++	txb[4] = nic->node_addr[4];
++	txb[5] = nic->node_addr[5];
++}
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void r8169_disable(struct dev *dev __unused)
++{
++	int i;
++	/* Stop the chip's Tx and Rx DMA processes. */
++	RTL_W8(ChipCmd, 0x00);
++
++	/* Disable interrupts by clearing the interrupt mask. */
++	RTL_W16(IntrMask, 0x0000);
++
++	RTL_W32(RxMissed, 0);
++
++	tpc->TxDescArrays = NULL;
++	tpc->RxDescArrays = NULL;
++	tpc->TxDescArray = NULL;
++	tpc->RxDescArray = NULL;
++	for (i = 0; i < NUM_RX_DESC; i++) {
++		tpc->RxBufferRing[i] = NULL;
++	}
++}
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++***************************************************************************/
++
++#define board_found 1
++#define valid_link 0
++static int r8169_probe(struct dev *dev, struct pci_device *pci)
++{
++	struct nic *nic = (struct nic *) dev;
++	static int board_idx = -1;
++	static int printed_version = 0;
++	int i, rc;
++	int option = -1, Cap10_100 = 0, Cap1000 = 0;
++
++	printf("r8169.c: Found %s, Vendor=%hX Device=%hX\n",
++	       pci->name, pci->vendor, pci->dev_id);
++
++	board_idx++;
++
++	printed_version = 1;
++
++	/* point to private storage */
++	tpc = &tpx;
++
++	rc = rtl8169_init_board(pci);	/* Return code is meaningless */
++
++	/* Get MAC address.  FIXME: read EEPROM */
++	for (i = 0; i < MAC_ADDR_LEN; i++)
++		nic->node_addr[i] = RTL_R8(MAC0 + i);
++
++	dprintf(("%s: Identified chip type is '%s'.\n", pci->name,
++		 rtl_chip_info[tpc->chipset].name));
++	/* Print out some hardware info */
++	printf("%s: %! at ioaddr %hX, ", pci->name, nic->node_addr,
++	       ioaddr);
++
++	/* if TBI is not endbled */
++	if (!(RTL_R8(PHYstatus) & TBI_Enable)) {
++		int val = mdio_read(PHY_AUTO_NEGO_REG);
++
++		option = media;
++		/* Force RTL8169 in 10/100/1000 Full/Half mode. */
++		if (option > 0) {
++			printf(" Force-mode Enabled.\n");
++			Cap10_100 = 0, Cap1000 = 0;
++			switch (option) {
++			case _10_Half:
++				Cap10_100 = PHY_Cap_10_Half;
++				Cap1000 = PHY_Cap_Null;
++				break;
++			case _10_Full:
++				Cap10_100 = PHY_Cap_10_Full;
++				Cap1000 = PHY_Cap_Null;
++				break;
++			case _100_Half:
++				Cap10_100 = PHY_Cap_100_Half;
++				Cap1000 = PHY_Cap_Null;
++				break;
++			case _100_Full:
++				Cap10_100 = PHY_Cap_100_Full;
++				Cap1000 = PHY_Cap_Null;
++				break;
++			case _1000_Full:
++				Cap10_100 = PHY_Cap_Null;
++				Cap1000 = PHY_Cap_1000_Full;
++				break;
++			default:
++				break;
++			}
++			/* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
++			mdio_write(PHY_AUTO_NEGO_REG,
++				   Cap10_100 | (val & 0x1F));
++			mdio_write(PHY_1000_CTRL_REG, Cap1000);
++		} else {
++			dprintf(("Auto-negotiation Enabled.\n",
++				 pci->name));
++
++			/* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
++			mdio_write(PHY_AUTO_NEGO_REG,
++				   PHY_Cap_10_Half | PHY_Cap_10_Full |
++				   PHY_Cap_100_Half | PHY_Cap_100_Full |
++				   (val & 0x1F));
++
++			/* enable 1000 Full Mode */
++			mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full);
++
++		}
++
++		/* Enable auto-negotiation and restart auto-nigotiation */
++		mdio_write(PHY_CTRL_REG,
++			   PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego);
++		udelay(100);
++
++		/* wait for auto-negotiation process */
++		for (i = 10000; i > 0; i--) {
++			/* Check if auto-negotiation complete */
++			if (mdio_read(PHY_STAT_REG) & PHY_Auto_Neco_Comp) {
++				udelay(100);
++				option = RTL_R8(PHYstatus);
++				if (option & _1000bpsF) {
++					printf
++					    ("1000Mbps Full-duplex operation.\n");
++				} else {
++					printf
++					    ("%sMbps %s-duplex operation.\n",
++					     (option & _100bps) ? "100" :
++					     "10",
++					     (option & FullDup) ? "Full" :
++					     "Half");
++				}
++				break;
++			} else {
++				udelay(100);
++			}
++		}		/* end for-loop to wait for auto-negotiation process */
++
++	} else {
++		udelay(100);
++		printf
++		    ("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n",
++		     pci->name,
++		     (RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed");
++
++	}
++
++	r8169_reset(nic);
++	/* point to NIC specific routines */
++	dev->disable = r8169_disable;
++	nic->poll = r8169_poll;
++	nic->transmit = r8169_transmit;
++	nic->irqno = pci->irq;
++	nic->irq = r8169_irq;
++	nic->ioaddr = ioaddr;
++	return 1;
++
++}
++
++static struct pci_id r8169_nics[] = {
++	PCI_ROM(0x10ec, 0x8169, "r8169", "RealTek RTL8169 Gigabit Ethernet"),
++};
++
++struct pci_driver r8169_driver = {
++	.type = NIC_DRIVER,
++	.name = "r8169/PCI",
++	.probe = r8169_probe,
++	.ids = r8169_nics,
++	.id_count = sizeof(r8169_nics) / sizeof(r8169_nics[0]),
++	.class = 0,
++};
+diff -Naur grub-0.97.orig/netboot/rtl8139.c grub-0.97/netboot/rtl8139.c
+--- grub-0.97.orig/netboot/rtl8139.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/rtl8139.c	2005-08-31 19:03:35.000000000 +0000
+@@ -17,6 +17,8 @@
+ /*********************************************************************/
+ 
+ /*
++  28 Dec 2002	ken_yap@users.sourceforge.net (Ken Yap)
++     Put in virt_to_bus calls to allow Etherboot relocation.
+ 
+   06 Apr 2001	ken_yap@users.sourceforge.net (Ken Yap)
+      Following email from Hyun-Joon Cha, added a disable routine, otherwise
+@@ -63,7 +65,6 @@
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ #include "timer.h"
+ 
+ #define RTL_TIMEOUT (1*TICKS_PER_SEC)
+@@ -112,9 +113,19 @@
+ 	 * definitions we will probably never need to know about.  */
+ };
+ 
++enum RxEarlyStatusBits {
++	ERGood=0x08, ERBad=0x04, EROVW=0x02, EROK=0x01
++};
++
+ enum ChipCmdBits {
+ 	CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
+ 
++enum IntrMaskBits {
++	SERR=0x8000, TimeOut=0x4000, LenChg=0x2000,
++	FOVW=0x40, PUN_LinkChg=0x20, RXOVW=0x10,
++	TER=0x08, TOK=0x04, RER=0x02, ROK=0x01
++};
++
+ /* Interrupt register bits, using my own meaningful names. */
+ enum IntrStatusBits {
+ 	PCIErr=0x8000, PCSTimeout=0x4000, CableLenChange= 0x2000,
+@@ -155,74 +166,68 @@
+ 	AcceptMulticast=0x04, AcceptMyPhys=0x02, AcceptAllPhys=0x01,
+ };
+ 
+-static int ioaddr;
+ static unsigned int cur_rx,cur_tx;
+ 
+ /* The RTL8139 can only transmit from a contiguous, aligned memory block.  */
+ static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4)));
+-
+-/* I know that this is a MEGA HACK, but the tagged boot image specification
+- * states that we can do whatever we want below 0x10000 - so we do!  */
+-/* But we still give the user the choice of using an internal buffer
+-   just in case - Ken */
+-#ifdef	USE_LOWMEM_BUFFER
+-#define rx_ring ((unsigned char *)(0x10000 - (RX_BUF_LEN + 16)))
+-#else
+ static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4)));
+-#endif
+ 
+-struct nic *rtl8139_probe(struct nic *nic, unsigned short *probeaddrs,
+-	struct pci_device *pci);
+-static int read_eeprom(int location);
++static int rtl8139_probe(struct dev *dev, struct pci_device *pci);
++static int read_eeprom(struct nic *nic, int location, int addr_len);
+ static void rtl_reset(struct nic *nic);
+ static void rtl_transmit(struct nic *nic, const char *destaddr,
+ 	unsigned int type, unsigned int len, const char *data);
+-static int rtl_poll(struct nic *nic);
+-static void rtl_disable(struct nic*);
++static int rtl_poll(struct nic *nic, int retrieve);
++static void rtl_disable(struct dev *);
++static void rtl_irq(struct nic *nic, irq_action_t action);
+ 
+ 
+-struct nic *rtl8139_probe(struct nic *nic, unsigned short *probeaddrs,
+-	struct pci_device *pci)
++static int rtl8139_probe(struct dev *dev, struct pci_device *pci)
+ {
++	struct nic *nic = (struct nic *)dev;
+ 	int i;
+ 	int speed10, fullduplex;
++	int addr_len;
++	unsigned short *ap = (unsigned short*)nic->node_addr;
+ 
+ 	/* There are enough "RTL8139" strings on the console already, so
+ 	 * be brief and concentrate on the interesting pieces of info... */
+ 	printf(" - ");
+ 
+ 	/* Mask the bit that says "this is an io addr" */
+-	ioaddr = probeaddrs[0] & ~3;
++	nic->ioaddr = pci->ioaddr & ~3;
++
++	/* Copy IRQ from PCI information */
++	nic->irqno = pci->irq;
+ 
+ 	adjust_pci_device(pci);
+ 
+ 	/* Bring the chip out of low-power mode. */
+-	outb(0x00, ioaddr + Config1);
+-
+-	if (read_eeprom(0) != 0xffff) {
+-		unsigned short *ap = (unsigned short*)nic->node_addr;
+-		for (i = 0; i < 3; i++)
+-			*ap++ = read_eeprom(i + 7);
+-	} else {
+-		unsigned char *ap = (unsigned char*)nic->node_addr;
+-		for (i = 0; i < ETH_ALEN; i++)
+-			*ap++ = inb(ioaddr + MAC0 + i);
+-	}
++	outb(0x00, nic->ioaddr + Config1);
+ 
+-	speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10;
+-	fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex;
+-	printf("ioaddr %#hX, addr %! %sMbps %s-duplex\n", ioaddr,
+-		nic->node_addr,  speed10 ? "10" : "100",
+-		fullduplex ? "full" : "half");
++	addr_len = read_eeprom(nic,0,8) == 0x8129 ? 8 : 6;
++	for (i = 0; i < 3; i++)
++	  *ap++ = read_eeprom(nic,i + 7,addr_len);
++
++	speed10 = inb(nic->ioaddr + MediaStatus) & MSRSpeed10;
++	fullduplex = inw(nic->ioaddr + MII_BMCR) & BMCRDuplex;
++	printf("ioaddr %#hX, irq %d, addr %! %sMbps %s-duplex\n", nic->ioaddr,
++	       nic->irqno, nic->node_addr,  speed10 ? "10" : "100",
++	       fullduplex ? "full" : "half");
+ 
+ 	rtl_reset(nic);
+ 
+-	nic->reset = rtl_reset;
+-	nic->poll = rtl_poll;
++	if (inb(nic->ioaddr + MediaStatus) & MSRLinkFail) {
++		printf("Cable not connected or other link failure\n");
++		return(0);
++	}
++
++	dev->disable  = rtl_disable;
++	nic->poll     = rtl_poll;
+ 	nic->transmit = rtl_transmit;
+-	nic->disable = rtl_disable;
++	nic->irq      = rtl_irq;
+ 
+-	return nic;
++	return 1;
+ }
+ 
+ /* Serial EEPROM section. */
+@@ -244,22 +249,23 @@
+ #define eeprom_delay()  inl(ee_addr)
+ 
+ /* The EEPROM commands include the alway-set leading bit. */
+-#define EE_WRITE_CMD    (5 << 6)
+-#define EE_READ_CMD     (6 << 6)
+-#define EE_ERASE_CMD    (7 << 6)
++#define EE_WRITE_CMD    (5)
++#define EE_READ_CMD     (6)
++#define EE_ERASE_CMD    (7)
+ 
+-static int read_eeprom(int location)
++static int read_eeprom(struct nic *nic, int location, int addr_len)
+ {
+ 	int i;
+ 	unsigned int retval = 0;
+-	long ee_addr = ioaddr + Cfg9346;
+-	int read_cmd = location | EE_READ_CMD;
++	long ee_addr = nic->ioaddr + Cfg9346;
++	int read_cmd = location | (EE_READ_CMD << addr_len);
+ 
+ 	outb(EE_ENB & ~EE_CS, ee_addr);
+ 	outb(EE_ENB, ee_addr);
++	eeprom_delay();
+ 
+ 	/* Shift the read command bits out. */
+-	for (i = 10; i >= 0; i--) {
++	for (i = 4 + addr_len; i >= 0; i--) {
+ 		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ 		outb(EE_ENB | dataval, ee_addr);
+ 		eeprom_delay();
+@@ -279,31 +285,51 @@
+ 
+ 	/* Terminate the EEPROM access. */
+ 	outb(~EE_CS, ee_addr);
++	eeprom_delay();
+ 	return retval;
+ }
+ 
++static const unsigned int rtl8139_rx_config = 
++	(RX_BUF_LEN_IDX << 11) |
++	(RX_FIFO_THRESH << 13) |
++	(RX_DMA_BURST << 8);
++	
++static void set_rx_mode(struct nic *nic) {
++	unsigned int mc_filter[2];
++	int rx_mode;
++	/* !IFF_PROMISC */
++	rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
++	mc_filter[1] = mc_filter[0] = 0xffffffff;
++
++	outl(rtl8139_rx_config | rx_mode, nic->ioaddr + RxConfig);
++
++	outl(mc_filter[0], nic->ioaddr + MAR0 + 0);
++	outl(mc_filter[1], nic->ioaddr + MAR0 + 4);
++}
++	
+ static void rtl_reset(struct nic* nic)
+ {
+ 	int i;
+ 
+-	outb(CmdReset, ioaddr + ChipCmd);
++	outb(CmdReset, nic->ioaddr + ChipCmd);
+ 
+ 	cur_rx = 0;
+ 	cur_tx = 0;
+ 
+ 	/* Give the chip 10ms to finish the reset. */
+ 	load_timer2(10*TICKS_PER_MS);
+-	while ((inb(ioaddr + ChipCmd) & CmdReset) != 0 && timer2_running())
++	while ((inb(nic->ioaddr + ChipCmd) & CmdReset) != 0 &&
++	       timer2_running())
+ 		/* wait */;
+ 
+ 	for (i = 0; i < ETH_ALEN; i++)
+-		outb(nic->node_addr[i], ioaddr + MAC0 + i);
++		outb(nic->node_addr[i], nic->ioaddr + MAC0 + i);
+ 
+ 	/* Must enable Tx/Rx before setting transfer thresholds! */
+-	outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
++	outb(CmdRxEnb | CmdTxEnb, nic->ioaddr + ChipCmd);
+ 	outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
+-		ioaddr + RxConfig);		/* accept no frames yet!  */
+-	outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
++		nic->ioaddr + RxConfig);	  /* accept no frames yet!  */
++	outl((TX_DMA_BURST<<8)|0x03000000, nic->ioaddr + TxConfig);
+ 
+ 	/* The Linux driver changes Config1 here to use a different LED pattern
+ 	 * for half duplex or full/autodetect duplex (for full/autodetect, the
+@@ -316,19 +342,26 @@
+ #ifdef	DEBUG_RX
+ 	printf("rx ring address is %X\n",(unsigned long)rx_ring);
+ #endif
+-	outl((unsigned long)rx_ring, ioaddr + RxBuf);
++	outl((unsigned long)virt_to_bus(rx_ring), nic->ioaddr + RxBuf);
++
++
+ 
+-	/* Start the chip's Tx and Rx process. */
+-	outl(0, ioaddr + RxMissed);
+-	/* set_rx_mode */
+-	outb(AcceptBroadcast|AcceptMyPhys, ioaddr + RxConfig);
+ 	/* If we add multicast support, the MAR0 register would have to be
+ 	 * initialized to 0xffffffffffffffff (two 32 bit accesses).  Etherboot
+ 	 * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast.  */
+-	outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+ 
++	outb(CmdRxEnb | CmdTxEnb, nic->ioaddr + ChipCmd);
++	
++	outl(rtl8139_rx_config, nic->ioaddr + RxConfig);
++	
++	/* Start the chip's Tx and Rx process. */
++	outl(0, nic->ioaddr + RxMissed);
++
++	/* set_rx_mode */
++	set_rx_mode(nic);
++	
+ 	/* Disable all known interrupts by setting the interrupt mask. */
+-	outw(0, ioaddr + IntrMask);
++	outw(0, nic->ioaddr + IntrMask);
+ }
+ 
+ static void rtl_transmit(struct nic *nic, const char *destaddr,
+@@ -337,10 +370,11 @@
+ 	unsigned int status, to, nstype;
+ 	unsigned long txstatus;
+ 
++	/* nstype assignment moved up here to avoid gcc 3.0.3 compiler bug */
++	nstype = htons(type);
+ 	memcpy(tx_buffer, destaddr, ETH_ALEN);
+ 	memcpy(tx_buffer + ETH_ALEN, nic->node_addr, ETH_ALEN);
+-	nstype = htons(type);
+-	memcpy(tx_buffer + 2 * ETH_ALEN, (char*)&nstype, 2);
++	memcpy(tx_buffer + 2 * ETH_ALEN, &nstype, 2);
+ 	memcpy(tx_buffer + ETH_HLEN, data, len);
+ 
+ 	len += ETH_HLEN;
+@@ -354,22 +388,22 @@
+ 		tx_buffer[len++] = '\0';
+ 	}
+ 
+-	outl((unsigned long)tx_buffer, ioaddr + TxAddr0 + cur_tx*4);
++	outl((unsigned long)virt_to_bus(tx_buffer), nic->ioaddr + TxAddr0 + cur_tx*4);
+ 	outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
+-		ioaddr + TxStatus0 + cur_tx*4);
++		nic->ioaddr + TxStatus0 + cur_tx*4);
+ 
+ 	to = currticks() + RTL_TIMEOUT;
+ 
+ 	do {
+-		status = inw(ioaddr + IntrStatus);
++		status = inw(nic->ioaddr + IntrStatus);
+ 		/* Only acknlowledge interrupt sources we can properly handle
+ 		 * here - the RxOverflow/RxFIFOOver MUST be handled in the
+ 		 * rtl_poll() function.  */
+-		outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
++		outw(status & (TxOK | TxErr | PCIErr), nic->ioaddr + IntrStatus);
+ 		if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
+ 	} while (currticks() < to);
+ 
+-	txstatus = inl(ioaddr+ TxStatus0 + cur_tx*4);
++	txstatus = inl(nic->ioaddr+ TxStatus0 + cur_tx*4);
+ 
+ 	if (status & TxOK) {
+ 		cur_tx = (cur_tx + 1) % NUM_TX_DESC;
+@@ -386,19 +420,22 @@
+ 	}
+ }
+ 
+-static int rtl_poll(struct nic *nic)
++static int rtl_poll(struct nic *nic, int retrieve)
+ {
+ 	unsigned int status;
+ 	unsigned int ring_offs;
+ 	unsigned int rx_size, rx_status;
+ 
+-	if (inb(ioaddr + ChipCmd) & RxBufEmpty) {
++	if (inb(nic->ioaddr + ChipCmd) & RxBufEmpty) {
+ 		return 0;
+ 	}
+ 
+-	status = inw(ioaddr + IntrStatus);
++	/* There is a packet ready */
++	if ( ! retrieve ) return 1;
++
++	status = inw(nic->ioaddr + IntrStatus);
+ 	/* See below for the rest of the interrupt acknowledges.  */
+-	outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
++	outw(status & ~(RxFIFOOver | RxOverflow | RxOK), nic->ioaddr + IntrStatus);
+ 
+ #ifdef	DEBUG_RX
+ 	printf("rtl_poll: int %hX ", status);
+@@ -438,21 +475,77 @@
+ 		nic->packet[12], nic->packet[13], rx_status);
+ #endif
+ 	cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+-	outw(cur_rx - 16, ioaddr + RxBufPtr);
++	outw(cur_rx - 16, nic->ioaddr + RxBufPtr);
+ 	/* See RTL8139 Programming Guide V0.1 for the official handling of
+ 	 * Rx overflow situations.  The document itself contains basically no
+ 	 * usable information, except for a few exception handling rules.  */
+-	outw(status & (RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
++	outw(status & (RxFIFOOver | RxOverflow | RxOK), nic->ioaddr + IntrStatus);
+ 	return 1;
+ }
+ 
+-static void rtl_disable(struct nic *nic)
++static void rtl_irq(struct nic *nic, irq_action_t action)
+ {
++	unsigned int mask;
++	/* Bit of a guess as to which interrupts we should allow */
++	unsigned int interested = ROK | RER | RXOVW | FOVW | SERR;
++
++	switch ( action ) {
++	case DISABLE :
++	case ENABLE :
++		mask = inw(nic->ioaddr + IntrMask);
++		mask = mask & ~interested;
++		if ( action == ENABLE ) mask = mask | interested;
++		outw(mask, nic->ioaddr + IntrMask);
++		break;
++	case FORCE :
++		/* Apparently writing a 1 to this read-only bit of a
++		 * read-only and otherwise unrelated register will
++		 * force an interrupt.  If you ever want to see how
++		 * not to write a datasheet, read the one for the
++		 * RTL8139...
++		 */
++		outb(EROK, nic->ioaddr + RxEarlyStatus);
++		break;
++	}
++}
++
++static void rtl_disable(struct dev *dev)
++{
++	struct nic *nic = (struct nic *)dev;
++	/* merge reset and disable */
++	rtl_reset(nic);
++
+ 	/* reset the chip */
+-	outb(CmdReset, ioaddr + ChipCmd);
++	outb(CmdReset, nic->ioaddr + ChipCmd);
+ 
+ 	/* 10 ms timeout */
+ 	load_timer2(10*TICKS_PER_MS);
+-	while ((inb(ioaddr + ChipCmd) & CmdReset) != 0 && timer2_running())
++	while ((inb(nic->ioaddr + ChipCmd) & CmdReset) != 0 && timer2_running())
+ 		/* wait */;
+ }
++
++static struct pci_id rtl8139_nics[] = {
++PCI_ROM(0x10ec, 0x8129, "rtl8129",       "Realtek 8129"),
++PCI_ROM(0x10ec, 0x8139, "rtl8139",       "Realtek 8139"),
++PCI_ROM(0x10ec, 0x8138, "rtl8139b",      "Realtek 8139B"),
++PCI_ROM(0x1186, 0x1300, "dfe538",        "DFE530TX+/DFE538TX"),
++PCI_ROM(0x1113, 0x1211, "smc1211-1",     "SMC EZ10/100"),
++PCI_ROM(0x1112, 0x1211, "smc1211",       "SMC EZ10/100"),
++PCI_ROM(0x1500, 0x1360, "delta8139",     "Delta Electronics 8139"),
++PCI_ROM(0x4033, 0x1360, "addtron8139",   "Addtron Technology 8139"),
++PCI_ROM(0x1186, 0x1340, "dfe690txd",     "D-Link DFE690TXD"),
++PCI_ROM(0x13d1, 0xab06, "fe2000vx",      "AboCom FE2000VX"),
++PCI_ROM(0x1259, 0xa117, "allied8139",    "Allied Telesyn 8139"),
++PCI_ROM(0x14ea, 0xab06, "fnw3603tx",     "Planex FNW-3603-TX"),
++PCI_ROM(0x14ea, 0xab07, "fnw3800tx",     "Planex FNW-3800-TX"),
++PCI_ROM(0xffff, 0x8139, "clone-rtl8139", "Cloned 8139"),
++};
++
++struct pci_driver rtl8139_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "RTL8139",
++	.probe    = rtl8139_probe,
++	.ids      = rtl8139_nics,
++	.id_count = sizeof(rtl8139_nics)/sizeof(rtl8139_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/segoff.h grub-0.97/netboot/segoff.h
+--- grub-0.97.orig/netboot/segoff.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/segoff.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,43 @@
++/*
++ * Segment:offset types and macros
++ *
++ * Initially written by Michael Brown (mcb30).
++ */
++
++#ifndef SEGOFF_H
++#define SEGOFF_H
++
++#include <stdint.h>
++#include <io.h>
++
++/* Segment:offset structure.  Note that the order within the structure
++ * is offset:segment.
++ */
++typedef struct {
++	uint16_t offset;
++	uint16_t segment;
++} segoff_t;
++
++/* For PXE stuff */
++typedef segoff_t SEGOFF16_t;
++
++/* Macros for converting from virtual to segment:offset addresses,
++ * when we don't actually care which of the many isomorphic results we
++ * get.
++ */
++#ifdef DEBUG_SEGMENT
++uint16_t SEGMENT ( const void * const ptr ) {
++	uint32_t phys = virt_to_phys ( ptr );
++	if ( phys > 0xfffff ) {
++		printf ( "FATAL ERROR: segment address out of range\n" );
++	}
++	return phys >> 4;
++}
++#else
++#define SEGMENT(x) ( virt_to_phys ( x ) >> 4 )
++#endif
++#define OFFSET(x) ( virt_to_phys ( x ) & 0xf )
++#define SEGOFF(x) { OFFSET(x), SEGMENT(x) }
++#define VIRTUAL(x,y) ( phys_to_virt ( ( ( x ) << 4 ) + ( y ) ) )
++
++#endif /* SEGOFF_H */
+diff -Naur grub-0.97.orig/netboot/sis900.c grub-0.97/netboot/sis900.c
+--- grub-0.97.orig/netboot/sis900.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/sis900.c	2005-08-31 20:02:38.000000000 +0000
+@@ -27,6 +27,11 @@
+ /* Revision History */
+ 
+ /*
++  07 Dec 2003  timlegge - Enabled Multicast Support
++  06 Dec 2003  timlegge - Fixed relocation issue in 5.2
++  04 Jan 2002  Chien-Yu Chen, Doug Ambrisko, Marty Connor  Patch to Etherboot 5.0.5
++     Added support for the SiS 630ET plus various bug fixes from linux kernel
++     source 2.4.17.
+   01 March 2001  mdc     1.0
+      Initial Release.  Tested with PCI based sis900 card and ThinkNIC
+      computer.
+@@ -35,13 +40,12 @@
+      Testet with SIS730S chipset + ICS1893
+ */
+ 
+-
+ /* Includes */
+ 
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
++#include "timer.h"
+ 
+ #include "sis900.h"
+ 
+@@ -51,6 +55,7 @@
+ 
+ static unsigned short vendor, dev_id;
+ static unsigned long ioaddr;
++static u8 pci_revision;
+ 
+ static unsigned int cur_phy;
+ 
+@@ -58,15 +63,10 @@
+ 
+ static BufferDesc txd;
+ static BufferDesc rxd[NUM_RX_DESC];
+-
+-#ifdef USE_LOWMEM_BUFFER
+-#define txb ((char *)0x10000 - TX_BUF_SIZE)
+-#define rxb ((char *)0x10000 - NUM_RX_DESC*RX_BUF_SIZE - TX_BUF_SIZE)
+-#else
+ static unsigned char txb[TX_BUF_SIZE];
+ static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE];
+-#endif
+ 
++#if 0
+ static struct mac_chip_info {
+     const char *name;
+     u16 vendor_id, device_id, flags;
+@@ -78,11 +78,13 @@
+       PCI_COMMAND_IO|PCI_COMMAND_MASTER, SIS900_TOTAL_SIZE},
+     {0,0,0,0,0} /* 0 terminated list. */
+ };
++#endif
+ 
+ static void sis900_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex);
+ static void amd79c901_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex);
+ static void ics1893_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex);
+ static void rtl8201_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex);
++static void vt6103_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex);
+ 
+ static struct mii_chip_info {
+     const char * name;
+@@ -96,6 +98,7 @@
+     {"AMD 79C901 HomePNA PHY",   0x0000, 0x35c8, amd79c901_read_mode},
+     {"ICS 1893 Integrated PHYceiver"   , 0x0015, 0xf441,ics1893_read_mode},
+     {"RTL 8201 10/100Mbps Phyceiver"   , 0x0000, 0x8201,rtl8201_read_mode},
++    {"VIA 6103 10/100Mbps Phyceiver", 0x0101, 0x8f20,vt6103_read_mode},
+     {0,0,0,0}
+ };
+ 
+@@ -106,24 +109,32 @@
+     u16 status;
+ } mii;
+ 
+-
+ // PCI to ISA bridge for SIS640E access
+-static struct pci_device   pci_isa_bridge_list[] = {
++static struct pci_id   pci_isa_bridge_list[] = {
+ 	{ 0x1039, 0x0008,
+-		"SIS 85C503/5513 PCI to ISA bridge", 0, 0, 0, 0},
+-	{0, 0, NULL, 0, 0, 0, 0}
++		"SIS 85C503/5513 PCI to ISA bridge"},
++};
++
++struct pci_driver sis_bridge_driver = {
++	.type     = BRIDGE_DRIVER,
++	.name     = "",
++	.probe    = 0,
++	.ids      = pci_isa_bridge_list,
++	.id_count = sizeof(pci_isa_bridge_list)/sizeof(pci_isa_bridge_list[0]),
++	.class    = 0,
+ };
+ 
+ /* Function Prototypes */
+ 
+-struct nic *sis900_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci);
++static int sis900_probe(struct dev *dev, struct pci_device *pci);
+ 
+ static u16  sis900_read_eeprom(int location);
+ static void sis900_mdio_reset(long mdio_addr);
+ static void sis900_mdio_idle(long mdio_addr);
+ static u16  sis900_mdio_read(int phy_id, int location);
++#if 0
+ static void sis900_mdio_write(int phy_id, int location, int val);
+-
++#endif
+ static void sis900_init(struct nic *nic);
+ 
+ static void sis900_reset(struct nic *nic);
+@@ -136,9 +147,11 @@
+ 
+ static void sis900_transmit(struct nic *nic, const char *d, 
+                             unsigned int t, unsigned int s, const char *p);
+-static int  sis900_poll(struct nic *nic);
++static int  sis900_poll(struct nic *nic, int retrieve);
++
++static void sis900_disable(struct dev *dev);
+ 
+-static void sis900_disable(struct nic *nic);
++static void sis900_irq(struct nic *nic, irq_action_t action);
+ 
+ /**
+  *	sis900_get_mac_addr: - Get MAC address for stand alone SiS900 model
+@@ -149,7 +162,7 @@
+  *	MAC address is read from read_eeprom() into @net_dev->dev_addr.
+  */
+ 
+-static int sis900_get_mac_addr(struct pci_device * pci_dev , struct nic *nic)
++static int sis900_get_mac_addr(struct pci_device * pci_dev __unused, struct nic *nic)
+ {
+ 	u16 signature;
+ 	int i;
+@@ -168,6 +181,50 @@
+ }
+ 
+ /**
++ *	sis96x_get_mac_addr: - Get MAC address for SiS962 or SiS963 model
++ *	@pci_dev: the sis900 pci device
++ *	@net_dev: the net device to get address for 
++ *
++ *	SiS962 or SiS963 model, use EEPROM to store MAC address. And EEPROM 
++ *	is shared by
++ *	LAN and 1394. When access EEPROM, send EEREQ signal to hardware first 
++ *	and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access 
++ *	by LAN, otherwise is not. After MAC address is read from EEPROM, send
++ *	EEDONE signal to refuse EEPROM access by LAN. 
++ *	The EEPROM map of SiS962 or SiS963 is different to SiS900. 
++ *	The signature field in SiS962 or SiS963 spec is meaningless. 
++ *	MAC address is read into @net_dev->dev_addr.
++ */
++
++static int sis96x_get_mac_addr(struct pci_device * pci_dev __unused, struct nic *nic)
++{
++/* 	long ioaddr = net_dev->base_addr; */
++	long ee_addr = ioaddr + mear;
++	u32 waittime = 0;
++	int i;
++	
++	printf("Alternate function\n");
++
++	outl(EEREQ, ee_addr);
++	while(waittime < 2000) {
++		if(inl(ee_addr) & EEGNT) {
++
++			/* get MAC address from EEPROM */
++			for (i = 0; i < 3; i++)
++			        ((u16 *)(nic->node_addr))[i] = sis900_read_eeprom(i+EEPROMMACAddr);
++
++			outl(EEDONE, ee_addr);
++			return 1;
++		} else {
++			udelay(1);	
++			waittime ++;
++		}
++	}
++	outl(EEDONE, ee_addr);
++	return 0;
++}
++
++/**
+  *	sis630e_get_mac_addr: - Get MAC address for SiS630E model
+  *	@pci_dev: the sis900 pci device
+  *	@net_dev: the net device to get address for
+@@ -177,17 +234,21 @@
+  *	MAC address is read into @net_dev->dev_addr.
+  */
+ 
+-static int sis630e_get_mac_addr(struct pci_device * pci_dev, struct nic *nic)
++static int sis630e_get_mac_addr(struct pci_device * pci_dev __unused, struct nic *nic)
+ {
+ 	u8 reg;
+ 	int i;
+-	struct pci_device	*p;
+-
+-	// find PCI to ISA bridge
+-	eth_pci_init(pci_isa_bridge_list);
++	struct pci_device	p[1];
+ 
+-    /* the firts entry in this list should contain bus/devfn */
+-    p = pci_isa_bridge_list;
++	/* find PCI to ISA bridge */
++	memset(p, 0, sizeof(p));
++	do {
++		find_pci(BRIDGE_DRIVER, p);
++	} while(p->driver && p->driver != &sis_bridge_driver);
++
++	/* error on failure */
++	if (!p->driver)
++	    return 0;
+ 
+ 	pcibios_read_config_byte(p->bus,p->devfn, 0x48, &reg);
+ 	pcibios_write_config_byte(p->bus,p->devfn, 0x48, reg | 0x40);
+@@ -201,7 +262,43 @@
+ 
+ 	return 1;
+ }
+-
++
++/**
++ *      sis630e_get_mac_addr: - Get MAC address for SiS630E model
++ *      @pci_dev: the sis900 pci device
++ *      @net_dev: the net device to get address for
++ *
++ *      SiS630E model, use APC CMOS RAM to store MAC address.
++ *      APC CMOS RAM is accessed through ISA bridge.
++ *      MAC address is read into @net_dev->dev_addr.
++ */
++
++static int sis635_get_mac_addr(struct pci_device * pci_dev __unused, struct nic *nic)
++{
++        u32 rfcrSave;
++        u32 i;
++	
++	
++        rfcrSave = inl(rfcr + ioaddr);
++
++        outl(rfcrSave | RELOAD, ioaddr + cr);
++        outl(0, ioaddr + cr);
++
++        /* disable packet filtering before setting filter */
++        outl(rfcrSave & ~RFEN, rfcr + ioaddr);
++
++        /* load MAC addr to filter data register */
++        for (i = 0 ; i < 3 ; i++) {
++                outl((i << RFADDR_shift), ioaddr + rfcr);
++                *( ((u16 *)nic->node_addr) + i) = inw(ioaddr + rfdr);
++        }
++
++        /* enable packet filitering */
++        outl(rfcrSave | RFEN, rfcr + ioaddr);
++
++        return 1;
++}
++
+ /* 
+  * Function: sis900_probe
+  *
+@@ -216,19 +313,21 @@
+  * Returns:   struct nic *:          pointer to NIC data structure
+  */
+ 
+-struct nic *sis900_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci)
++static int sis900_probe(struct dev *dev, struct pci_device *pci)
+ {
++    struct nic *nic = (struct nic *)dev;
+     int i;
+     int found=0;
+     int phy_addr;
+-    u16 signature;
+     u8 revision;
+     int ret;
+ 
+-    if (io_addrs == 0 || *io_addrs == 0)
+-        return NULL;
++    if (pci->ioaddr == 0)
++        return 0;
+ 
+-    ioaddr  = *io_addrs & ~3;
++    nic->irqno  = 0;
++    nic->ioaddr = pci->ioaddr & ~3;
++    ioaddr  = pci->ioaddr & ~3;
+     vendor  = pci->vendor;
+     dev_id  = pci->dev_id;
+ 
+@@ -240,19 +339,29 @@
+     /* get MAC address */
+     ret = 0;
+     pcibios_read_config_byte(pci->bus,pci->devfn, PCI_REVISION, &revision);
+-    if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV)
+-       ret = sis630e_get_mac_addr(pci, nic);
+-    else if (revision == SIS630S_900_REV)
++    
++    /* save for use later in sis900_reset() */
++    pci_revision = revision; 
++
++    if (revision == SIS630E_900_REV)
+         ret = sis630e_get_mac_addr(pci, nic);
++    else if ((revision > 0x81) && (revision <= 0x90))
++        ret = sis635_get_mac_addr(pci, nic);
++    else if (revision == SIS96x_900_REV)
++	ret = sis96x_get_mac_addr(pci, nic);
+     else
+         ret = sis900_get_mac_addr(pci, nic);
+ 
+     if (ret == 0)
+     {
+         printf ("sis900_probe: Error MAC address not found\n");
+-        return NULL;
++        return 0;
+     }
+ 
++    /* 630ET : set the mii access mode as software-mode */
++    if (revision == SIS630ET_900_REV)
++	outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr);
++
+     printf("\nsis900_probe: MAC addr %! at ioaddr %#hX\n",
+            nic->node_addr, ioaddr);
+     printf("sis900_probe: Vendor:%#hX Device:%#hX\n", vendor, dev_id);
+@@ -264,7 +373,7 @@
+     for (phy_addr = 0; phy_addr < 32; phy_addr++) {
+         u16 mii_status;
+         u16 phy_id0, phy_id1;
+-                
++
+         mii_status = sis900_mdio_read(phy_addr, MII_STATUS);
+         if (mii_status == 0xffff || mii_status == 0x0000)
+             /* the mii is not accessable, try next one */
+@@ -272,7 +381,7 @@
+                 
+         phy_id0 = sis900_mdio_read(phy_addr, MII_PHY_ID0);
+         phy_id1 = sis900_mdio_read(phy_addr, MII_PHY_ID1);
+-                
++
+         /* search our mii table for the current mii */ 
+         for (i = 0; mii_chip_table[i].phy_id1; i++) {
+ 
+@@ -294,7 +403,7 @@
+         
+     if (found == 0) {
+         printf("sis900_probe: No MII transceivers found!\n");
+-        return NULL;
++        return 0;
+     }
+ 
+     /* Arbitrarily select the last PHY found as current PHY */
+@@ -304,15 +413,14 @@
+     /* initialize device */
+     sis900_init(nic);
+ 
+-    nic->reset    = sis900_init;
++    dev->disable  = sis900_disable;
+     nic->poll     = sis900_poll;
+     nic->transmit = sis900_transmit;
+-    nic->disable  = sis900_disable;
++    nic->irq      = sis900_irq;
+ 
+-    return nic;
++    return 1;
+ }
+ 
+-
+ /* 
+  * EEPROM Routines:  These functions read and write to EEPROM for 
+  *    retrieving the MAC address and other configuration information about 
+@@ -322,7 +430,6 @@
+ /* Delay between EEPROM clock transitions. */
+ #define eeprom_delay()  inl(ee_addr)
+ 
+-
+ /* Function: sis900_read_eeprom
+  *
+  * Description: reads and returns a given location from EEPROM
+@@ -378,7 +485,6 @@
+ 
+ #define sis900_mdio_delay()    inl(mdio_addr)
+ 
+-
+ /* 
+    Read and write the MII management registers using software-generated
+    serial MDIO protocol. Note that the command bits and data bits are
+@@ -432,9 +538,11 @@
+         outl(MDC, mdio_addr);
+         sis900_mdio_delay();
+     }
++    outl(0x00, mdio_addr);
+     return retval;
+ }
+ 
++#if 0
+ static void sis900_mdio_write(int phy_id, int location, int value)
+ {
+     long mdio_addr = ioaddr + mear;
+@@ -471,10 +579,11 @@
+         outb(MDC, mdio_addr);
+         sis900_mdio_delay();
+     }
++    outl(0x00, mdio_addr);
+     return;
+ }
++#endif
+ 
+-
+ /* Function: sis900_init
+  *
+  * Description: resets the ethernet controller chip and various
+@@ -500,10 +609,9 @@
+ 
+     sis900_check_mode(nic);
+ 
+-    outl(RxENA, ioaddr + cr);
++    outl(RxENA| inl(ioaddr + cr), ioaddr + cr);
+ }
+ 
+-
+ /* 
+  * Function: sis900_reset
+  *
+@@ -515,7 +623,7 @@
+  */
+ 
+ static void 
+-sis900_reset(struct nic *nic)
++sis900_reset(struct nic *nic __unused)
+ {
+     int i = 0;
+     u32 status = TxRCMP | RxRCMP;
+@@ -524,16 +632,19 @@
+     outl(0, ioaddr + imr);
+     outl(0, ioaddr + rfcr);
+ 
+-    outl(RxRESET | TxRESET | RESET, ioaddr + cr);
+-        
++    outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr);
++
+     /* Check that the chip has finished the reset. */
+     while (status && (i++ < 1000)) {
+         status ^= (inl(isr + ioaddr) & status);
+     }
+-    outl(PESEL, ioaddr + cfg);
++
++    if( (pci_revision == SIS635A_900_REV) || (pci_revision == SIS900B_900_REV) )
++            outl(PESEL | RND_CNT, ioaddr + cfg);
++    else
++            outl(PESEL, ioaddr + cfg);
+ }
+ 
+-
+ /* Function: sis_init_rxfilter
+  *
+  * Description: sets receive filter address to our MAC address
+@@ -552,7 +663,7 @@
+     rfcrSave = inl(rfcr + ioaddr);
+ 
+     /* disable packet filtering before setting filter */
+-    outl(rfcrSave & ~RFEN, rfcr);
++    outl(rfcrSave & ~RFEN, rfcr + ioaddr);
+ 
+     /* load MAC addr to filter data register */
+     for (i = 0 ; i < 3 ; i++) {
+@@ -571,7 +682,6 @@
+     outl(rfcrSave | RFEN, rfcr + ioaddr);
+ }
+ 
+-
+ /* 
+  * Function: sis_init_txd
+  *
+@@ -583,20 +693,19 @@
+  */
+ 
+ static void
+-sis900_init_txd(struct nic *nic)
++sis900_init_txd(struct nic *nic __unused)
+ {
+     txd.link   = (u32) 0;
+     txd.cmdsts = (u32) 0;
+-    txd.bufptr = (u32) &txb[0];
++    txd.bufptr = virt_to_bus(&txb[0]);
+ 
+     /* load Transmit Descriptor Register */
+-    outl((u32) &txd, ioaddr + txdp); 
++    outl(virt_to_bus(&txd), ioaddr + txdp); 
+     if (sis900_debug > 0)
+         printf("sis900_init_txd: TX descriptor register loaded with: %X\n", 
+                inl(ioaddr + txdp));
+ }
+ 
+-
+ /* Function: sis_init_rxd
+  *
+  * Description: initializes the Rx descriptor ring
+@@ -607,7 +716,7 @@
+  */
+ 
+ static void 
+-sis900_init_rxd(struct nic *nic) 
++sis900_init_rxd(struct nic *nic __unused) 
+ { 
+     int i;
+ 
+@@ -615,16 +724,16 @@
+ 
+     /* init RX descriptor */
+     for (i = 0; i < NUM_RX_DESC; i++) {
+-        rxd[i].link   = (i+1 < NUM_RX_DESC) ? (u32) &rxd[i+1] : (u32) &rxd[0];
++        rxd[i].link   = virt_to_bus((i+1 < NUM_RX_DESC) ? &rxd[i+1] : &rxd[0]);
+         rxd[i].cmdsts = (u32) RX_BUF_SIZE;
+-        rxd[i].bufptr = (u32) &rxb[i*RX_BUF_SIZE];
++        rxd[i].bufptr = virt_to_bus(&rxb[i*RX_BUF_SIZE]);
+         if (sis900_debug > 0)
+             printf("sis900_init_rxd: rxd[%d]=%X link=%X cmdsts=%X bufptr=%X\n", 
+                    i, &rxd[i], rxd[i].link, rxd[i].cmdsts, rxd[i].bufptr);
+     }
+ 
+     /* load Receive Descriptor Register */
+-    outl((u32) &rxd[0], ioaddr + rxdp);
++    outl(virt_to_bus(&rxd[0]), ioaddr + rxdp);
+ 
+     if (sis900_debug > 0)
+         printf("sis900_init_rxd: RX descriptor register loaded with: %X\n", 
+@@ -632,7 +741,6 @@
+ 
+ }
+ 
+-
+ /* Function: sis_init_rxd
+  *
+  * Description: 
+@@ -644,25 +752,36 @@
+  * Returns:   void.
+  */
+ 
+-static void sis900_set_rx_mode(struct nic *nic)
++static void sis900_set_rx_mode(struct nic *nic __unused)
+ {
+-    int i;
++    int i, table_entries;
++    u32 rx_mode; 
++    u16 mc_filter[16] = {0};	/* 256/128 bits multicast hash table */
++    	
++    if((pci_revision == SIS635A_900_REV) || (pci_revision == SIS900B_900_REV))
++	table_entries = 16;
++    else
++	table_entries = 8;
+ 
+-    /* Configure Multicast Hash Table in Receive Filter 
+-       to reject all MCAST packets */
+-    for (i = 0; i < 8; i++) {
++    /* accept all multicast packet */
++    rx_mode = RFAAB | RFAAM;
++    for (i = 0; i < table_entries; i++)
++		mc_filter[i] = 0xffff;
++					
++    /* update Multicast Hash Table in Receive Filter */
++    for (i = 0; i < table_entries; i++) {
+         /* why plus 0x04? That makes the correct value for hash table. */
+         outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr);
+-        outl((u32)(0x0), ioaddr + rfdr);
++        outl(mc_filter[i], ioaddr + rfdr);
+     }
+-    /* Accept Broadcast packets, destination addresses that match 
++
++    /* Accept Broadcast and multicast packets, destination addresses that match 
+        our MAC address */
+-    outl(RFEN | RFAAB, ioaddr + rfcr);
++    outl(RFEN | rx_mode, ioaddr + rfcr);
+ 
+     return;
+ }
+ 
+-
+ /* Function: sis900_check_mode
+  *
+  * Description: checks the state of transmit and receive
+@@ -674,15 +793,21 @@
+  */
+ 
+ static void
+-sis900_check_mode (struct nic *nic)
++sis900_check_mode(struct nic *nic)
+ {
+     int speed, duplex;
+     u32 tx_flags = 0, rx_flags = 0;
+ 
+     mii.chip_info->read_mode(nic, cur_phy, &speed, &duplex);
+ 
+-    tx_flags = TxATP | (TX_DMA_BURST << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
+-    rx_flags = RX_DMA_BURST << RxMXDMA_shift;
++    if( inl(ioaddr + cfg) & EDB_MASTER_EN ) {
++        tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
++	rx_flags = DMA_BURST_64 << RxMXDMA_shift;
++    }
++    else {
++            tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
++            rx_flags = DMA_BURST_512 << RxMXDMA_shift;
++    }
+ 
+     if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) {
+         rx_flags |= (RxDRNT_10 << RxDRNT_shift);
+@@ -702,7 +827,6 @@
+     outl (rx_flags, ioaddr + rxcfg);
+ }
+ 
+-
+ /* Function: sis900_read_mode
+  *
+  * Description: retrieves and displays speed and duplex
+@@ -714,24 +838,33 @@
+  */
+ 
+ static void
+-sis900_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex)
++sis900_read_mode(struct nic *nic __unused, int phy_addr, int *speed, int *duplex)
+ {
+     int i = 0;
+     u32 status;
++    u16 phy_id0, phy_id1;
+         
+     /* STSOUT register is Latched on Transition, read operation updates it */
+     while (i++ < 2)
+         status = sis900_mdio_read(phy_addr, MII_STSOUT);
+ 
+-    if (status & MII_STSOUT_SPD)
+-        *speed = HW_SPEED_100_MBPS;
+-    else
+-        *speed = HW_SPEED_10_MBPS;
+-
+-    if (status & MII_STSOUT_DPLX)
+-        *duplex = FDX_CAPABLE_FULL_SELECTED;
+-    else
+-        *duplex = FDX_CAPABLE_HALF_SELECTED;
++    *speed = HW_SPEED_10_MBPS;
++    *duplex = FDX_CAPABLE_HALF_SELECTED;
++    
++    if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX))
++	*speed = HW_SPEED_100_MBPS;
++    if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX))
++	*duplex = FDX_CAPABLE_FULL_SELECTED;
++	
++    /* Workaround for Realtek RTL8201 PHY issue */
++    phy_id0 = sis900_mdio_read(phy_addr, MII_PHY_ID0);
++    phy_id1 = sis900_mdio_read(phy_addr, MII_PHY_ID1);
++    if((phy_id0 == 0x0000) && ((phy_id1 & 0xFFF0) == 0x8200)){
++	if(sis900_mdio_read(phy_addr, MII_CONTROL) & MII_CNTL_FDX)
++	    *duplex = FDX_CAPABLE_FULL_SELECTED;
++	if(sis900_mdio_read(phy_addr, 0x0019) & 0x01)
++	    *speed = HW_SPEED_100_MBPS;
++    }
+ 
+     if (status & MII_STSOUT_LINK_FAIL)
+         printf("sis900_read_mode: Media Link Off\n");
+@@ -743,7 +876,6 @@
+                "full" : "half");
+ }
+ 
+-
+ /* Function: amd79c901_read_mode
+  *
+  * Description: retrieves and displays speed and duplex
+@@ -755,7 +887,7 @@
+  */
+ 
+ static void
+-amd79c901_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex)
++amd79c901_read_mode(struct nic *nic __unused, int phy_addr, int *speed, int *duplex)
+ {
+     int i;
+     u16 status;
+@@ -796,7 +928,6 @@
+     }
+ }
+ 
+-
+ /**
+  *	ics1893_read_mode: - read media mode for ICS1893 PHY
+  *	@net_dev: the net device to read mode for
+@@ -808,7 +939,7 @@
+  *	to determine the speed and duplex mode for sis900
+  */
+ 
+-static void ics1893_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex)
++static void ics1893_read_mode(struct nic *nic __unused, int phy_addr, int *speed, int *duplex)
+ {
+ 	int i = 0;
+ 	u32 status;
+@@ -848,7 +979,7 @@
+  *	to determine the speed and duplex mode for sis900
+  */
+ 
+-static void rtl8201_read_mode(struct nic *nic, int phy_addr, int *speed, int *duplex)
++static void rtl8201_read_mode(struct nic *nic __unused, int phy_addr, int *speed, int *duplex)
+ {
+ 	u32 status;
+ 
+@@ -878,7 +1009,51 @@
+ 		       *duplex == FDX_CAPABLE_FULL_SELECTED ?
+ 		       "full" : "half");
+ 	else
+-		printf("rtl9201_read_config_mode: Media Link Off\n");
++		printf("rtl8201_read_config_mode: Media Link Off\n");
++}
++
++/**
++ *	vt6103_read_mode: - read media mode for vt6103 phy
++ *	@nic: the net device to read mode for
++ *	@phy_addr: mii phy address
++ *	@speed: the transmit speed to be determined
++ *	@duplex: the duplex mode to be determined
++ *
++ *	read MII_STATUS register from rtl8201 phy
++ *	to determine the speed and duplex mode for sis900
++ */
++
++static void vt6103_read_mode(struct nic *nic __unused, int phy_addr, int *speed, int *duplex)
++{
++	u32 status;
++
++	status = sis900_mdio_read(phy_addr, MII_STATUS);
++
++	if (status & MII_STAT_CAN_TX_FDX) {
++		*speed = HW_SPEED_100_MBPS;
++		*duplex = FDX_CAPABLE_FULL_SELECTED;
++	}
++	else if (status & MII_STAT_CAN_TX) {
++		*speed = HW_SPEED_100_MBPS;
++		*duplex = FDX_CAPABLE_HALF_SELECTED;
++	}
++	else if (status & MII_STAT_CAN_T_FDX) {
++		*speed = HW_SPEED_10_MBPS;
++		*duplex = FDX_CAPABLE_FULL_SELECTED;
++	}
++	else if (status & MII_STAT_CAN_T) {
++		*speed = HW_SPEED_10_MBPS;
++		*duplex = FDX_CAPABLE_HALF_SELECTED;
++	}
++
++	if (status & MII_STAT_LINK)
++		printf("vt6103_read_mode: Media Link On %s %s-duplex \n",
++		       *speed == HW_SPEED_100_MBPS ?
++		       "100mbps" : "10mbps",
++		       *duplex == FDX_CAPABLE_FULL_SELECTED ?
++		       "full" : "half");
++	else
++		printf("vt6103_read_config_mode: Media Link Off\n");
+ }
+ 
+ /* Function: sis900_transmit
+@@ -900,14 +1075,14 @@
+                 unsigned int s,     /* size */
+                 const char  *p)     /* Packet */
+ {
+-    u32 status, to, nstype;
++    u32 to, nstype;
+     u32 tx_status;
+     
+     /* Stop the transmitter */
+-    outl(TxDIS, ioaddr + cr);
++    outl(TxDIS | inl(ioaddr + cr), ioaddr + cr);
+ 
+     /* load Transmit Descriptor Register */
+-    outl((u32) &txd, ioaddr + txdp); 
++    outl(virt_to_bus(&txd), ioaddr + txdp); 
+     if (sis900_debug > 1)
+         printf("sis900_transmit: TX descriptor register loaded with: %X\n", 
+                inl(ioaddr + txdp));
+@@ -929,18 +1104,18 @@
+         txb[s++] = '\0';
+ 
+     /* set the transmit buffer descriptor and enable Transmit State Machine */
+-    txd.bufptr = (u32) &txb[0];
++    txd.bufptr = virt_to_bus(&txb[0]);
+     txd.cmdsts = (u32) OWN | s;
+ 
+     /* restart the transmitter */
+-    outl(TxENA, ioaddr + cr);
++    outl(TxENA | inl(ioaddr + cr), ioaddr + cr);
+ 
+     if (sis900_debug > 1)
+         printf("sis900_transmit: Queued Tx packet size %d.\n", (int) s);
+ 
+     to = currticks() + TX_TIMEOUT;
+ 
+-    while ((((volatile u32) tx_status=txd.cmdsts) & OWN) && (currticks() < to))
++    while ((volatile u32) ( tx_status=txd.cmdsts & OWN) && (currticks() < to))
+         /* wait */ ;
+ 
+     if (currticks() >= to) {
+@@ -955,7 +1130,6 @@
+     outl(0, ioaddr + imr);
+ }
+ 
+-
+ /* Function: sis900_poll
+  *
+  * Description: checks for a received packet and returns it if found.
+@@ -971,7 +1145,7 @@
+  */
+ 
+ static int
+-sis900_poll(struct nic *nic)
++sis900_poll(struct nic *nic, int retrieve)
+ {
+     u32 rx_status = rxd[cur_rx].cmdsts;
+     int retstat = 0;
+@@ -986,6 +1160,8 @@
+         printf("sis900_poll: got a packet: cur_rx:%d, status:%X\n",
+                cur_rx, rx_status);
+ 
++    if ( ! retrieve ) return 1;
++    
+     nic->packetlen = (rx_status & DSIZE) - CRC_SIZE;
+ 
+     if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
+@@ -1001,18 +1177,18 @@
+ 
+     /* return the descriptor and buffer to receive ring */
+     rxd[cur_rx].cmdsts = RX_BUF_SIZE;
+-    rxd[cur_rx].bufptr = (u32) &rxb[cur_rx*RX_BUF_SIZE];
++    rxd[cur_rx].bufptr = virt_to_bus(&rxb[cur_rx*RX_BUF_SIZE]);
+         
+     if (++cur_rx == NUM_RX_DESC)
+         cur_rx = 0;
+ 
+     /* re-enable the potentially idle receive state machine */
+-    outl(RxENA , ioaddr + cr);
++    outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
+ 
+     return retstat;
++
+ }
+ 
+-
+ /* Function: sis900_disable
+  *
+  * Description: Turns off interrupts and stops Tx and Rx engines
+@@ -1023,12 +1199,53 @@
+  */
+ 
+ static void
+-sis900_disable(struct nic *nic)
++sis900_disable(struct dev *dev)
+ {
++    struct nic *nic = (struct nic *)dev;
++    /* merge reset and disable */
++    sis900_init(nic);
++
+     /* Disable interrupts by clearing the interrupt mask. */
+     outl(0, ioaddr + imr);
+     outl(0, ioaddr + ier);
+     
+     /* Stop the chip's Tx and Rx Status Machine */
+-    outl(RxDIS | TxDIS, ioaddr + cr);
++    outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
++}
++
++/* Function: sis900_irq
++ *
++ * Description: Enable, Disable, or Force, interrupts
++ *    
++ * Arguments: struct nic *nic:          NIC data structure
++ *            irq_action_t action:      Requested action       
++ *
++ * Returns:   void.
++ */
++
++static void
++sis900_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
+ }
++
++static struct pci_id sis900_nics[] = {
++PCI_ROM(0x1039, 0x0900, "sis900",  "SIS900"),
++PCI_ROM(0x1039, 0x7016, "sis7016", "SIS7016"),
++};
++
++struct pci_driver sis900_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "SIS900",
++	.probe    = sis900_probe,
++	.ids      = sis900_nics,
++	.id_count = sizeof(sis900_nics)/sizeof(sis900_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/sis900.h grub-0.97/netboot/sis900.h
+--- grub-0.97.orig/netboot/sis900.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/sis900.h	2005-08-31 19:03:35.000000000 +0000
+@@ -39,14 +39,16 @@
+ 
+ /* Symbolic names for bits in various registers */
+ enum sis900_command_register_bits {
+-    RESET   = 0x00000100, 
+-    SWI     = 0x00000080, 
+-    RxRESET = 0x00000020,
+-    TxRESET = 0x00000010, 
+-    RxDIS   = 0x00000008, 
+-    RxENA   = 0x00000004,
+-    TxDIS   = 0x00000002, 
+-    TxENA   = 0x00000001
++    RELOAD     = 0x00000400,
++    ACCESSMODE = 0x00000200,
++    RESET      = 0x00000100, 
++    SWI        = 0x00000080, 
++    RxRESET    = 0x00000020,
++    TxRESET    = 0x00000010, 
++    RxDIS      = 0x00000008, 
++    RxENA      = 0x00000004,
++    TxDIS      = 0x00000002, 
++    TxENA      = 0x00000001
+ };
+ 
+ enum sis900_configuration_register_bits {
+@@ -57,7 +59,10 @@
+     EXD      = 0x00000010, 
+     PESEL    = 0x00000008, 
+     LPM      = 0x00000004, 
+-    BEM      = 0x00000001
++    BEM      = 0x00000001,
++    RND_CNT  = 0x00000400,
++    FAIR_BACKOFF = 0x00000200,
++    EDB_MASTER_EN = 0x00002000
+ };
+ 
+ enum sis900_eeprom_access_reigster_bits {
+@@ -108,6 +113,10 @@
+ #define TX_DMA_BURST    0
+ #define RX_DMA_BURST    0
+ 
++enum sis900_tx_rx_dma{
++	        DMA_BURST_512 = 0,      DMA_BURST_64 = 5
++};
++
+ /* transmit FIFO threshholds */
+ #define TX_FILL_THRESH  16      /* 1/4 FIFO size */
+ #define TxFILLT_shift   8
+@@ -172,6 +181,11 @@
+     EEeraseAll      = 0x0120,
+     EEwriteAll      = 0x0110, 
+     EEaddrMask      = 0x013F, 
++    EEcmdShift 	    = 16
++};
++/* For SiS962 or SiS963, request the eeprom software access */
++enum sis96x_eeprom_command {
++	EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100
+ };
+ 
+ /* Manamgement Data I/O (mdio) frame */
+@@ -236,7 +250,8 @@
+     MII_CONFIG1 = 0x0010,
+     MII_CONFIG2 = 0x0011,
+     MII_STSOUT  = 0x0012,
+-    MII_MASK    = 0x0013
++    MII_MASK    = 0x0013,
++    MII_RESV    = 0x0014
+ };
+ 
+ /* mii registers specific to AMD 79C901 */
+@@ -320,7 +335,9 @@
+ 
+ enum sis900_revision_id {
+ 	SIS630A_900_REV = 0x80,		SIS630E_900_REV = 0x81,
+-	SIS630S_900_REV = 0x82,		SIS630EA1_900_REV = 0x83
++	SIS630S_900_REV = 0x82,		SIS630EA1_900_REV = 0x83,
++	SIS630ET_900_REV = 0x84,        SIS635A_900_REV = 0x90,
++	SIS96x_900_REV = 0X91,		SIS900B_900_REV = 0x03
+ };
+ 
+ enum sis630_revision_id {
+diff -Naur grub-0.97.orig/netboot/sis900.txt grub-0.97/netboot/sis900.txt
+--- grub-0.97.orig/netboot/sis900.txt	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/sis900.txt	1970-01-01 00:00:00.000000000 +0000
+@@ -1,91 +0,0 @@
+-How I added the SIS900 card to Etherboot
+-
+-Author: Marty Connor (mdc@thinguin.org)
+-
+-Date:   25 Febrary 2001
+-
+-Description:
+-
+-This file is intended to help people who want to write an Etherboot
+-driver or port another driver to Etherboot.  It is a starting point.
+-Perhaps someday I may write a more detailed description of writing an
+-Etherboot driver. This text should help get people started, and
+-studying sis900.[ch] should help show the basic structure and
+-techniques involved in writing and Etherboot driver.
+-
+-***********************************************************************
+-
+-0. Back up all the files I need to modify:
+-
+-cd etherboot-4.7.20/src
+-cp Makefile Makefile.orig
+-cp config.c config.c.orig
+-cp pci.h pci.h.orig
+-cp NIC NIC.orig
+-cp cards.h cards.h.orig
+-
+-1. Edit src/Makefile to add SIS900FLAGS to defines
+-
+-SIS900FLAGS=	       	-DINCLUDE_SIS900
+-
+-2. edit src/pci.h to add PCI signatures for card
+-
+-#define PCI_VENDOR_ID_SIS         	0x1039
+-#define PCI_DEVICE_ID_SIS900     	0x0900   
+-#define PCI_DEVICE_ID_SIS7016    	0x7016  
+-
+-3. Edit src/config.c to add the card to the card probe list
+-
+-#if defined(INCLUDE_NS8390)  || defined(INCLUDE_EEPRO100)  || 
+-    defined(INCLUDE_LANCE)   || defined(INCLUDE_EPIC100)   || 
+-    defined(INCLUDE_TULIP)   || defined(INCLUDE_OTULIP)    ||
+-    defined(INCLUDE_3C90X)   || defined(INCLUDE_3C595)     ||
+-    defined(INCLUDE_RTL8139) || defined(INCLUDE_VIA_RHINE) || 
+-    defined(INCLUDE_SIS900)  || defined(INCLUDE_W89C840)
+-
+-... and ...
+-
+-#ifdef INCLUDE_SIS900
+-       { PCI_VENDOR_ID_SIS,     	PCI_DEVICE_ID_SIS900,
+-         "SIS900", 0, 0, 0, 0},
+-       { PCI_VENDOR_ID_SIS,     	PCI_DEVICE_ID_SIS7016,
+-	 "SIS7016", 0, 0, 0, 0},
+-#endif
+-
+-... and ...
+-
+-#ifdef INCLUDE_SIS900
+-	{ "SIS900", sis900_probe, pci_ioaddrs },	
+-#endif
+-
+-4. Edit NIC to add sis900 and sis7016 to NIC list
+-
+-# SIS 900 and SIS 7016
+-sis900		sis900		0x1039,0x0900
+-sis7016		sis900		0x1039,0x7016
+-
+-5. Edit cards.h to add sis900 probe routine declaration
+-
+-#ifdef	INCLUDE_SIS900
+-extern struct nic	*sis900_probe(struct nic *, unsigned short *
+-                        PCI_ARG(struct pci_device *));
+-#endif
+-
+-***********************************************************************
+-
+-At this point, you can begin creating your driver source file.  See
+-the "Writing and Etherboot Driver" section of the Etherboot
+-documentation for some hints.  See the skel.c file for a starting
+-point.  If there is a Linux driver for the card, you may be able to
+-use that.  Copy and learn from existing Etherboot drivers (this is GPL
+-/ Open Source software!).
+-
+-Join the etherboot-developers and etherboot-users mailing lists
+-(information is on etherboot.sourceforge.net) for information and
+-assistance. We invite more developers to help improve Etherboot.
+-
+-Visit the http://etherboot.sourceforge.net, http://thinguin.org, 
+-http://rom-o-matic.net, and http://ltsp.org sites for information and
+-assistance.
+-
+-Enjoy.
+diff -Naur grub-0.97.orig/netboot/sk_g16.c grub-0.97/netboot/sk_g16.c
+--- grub-0.97.orig/netboot/sk_g16.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/sk_g16.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,1160 +0,0 @@
+-/**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-Schneider & Koch G16 NIC driver for Etherboot
+-heavily based on SK G16 driver from Linux 2.0.36
+-Changes to make it work with Etherboot by Georg Baum <Georg.Baum@gmx.de>
+-***************************************************************************/
+-
+-/*-
+- * Copyright (C) 1994 by PJD Weichmann & SWS Bern, Switzerland
+- *
+- * This software may be used and distributed according to the terms
+- * of the GNU Public License, incorporated herein by reference.
+- *
+- * Module         : sk_g16.c
+- *
+- * Version        : $Revision: 1.4 $
+- *
+- * Author         : Patrick J.D. Weichmann
+- *
+- * Date Created   : 94/05/26
+- * Last Updated   : $Date: 2002/01/02 21:56:40 $
+- *
+- * Description    : Schneider & Koch G16 Ethernet Device Driver for
+- *                  Linux Kernel >= 1.1.22
+- * Update History :
+- *
+--*/
+-
+-/*
+- * The Schneider & Koch (SK) G16 Network device driver is based
+- * on the 'ni6510' driver from Michael Hipp which can be found at
+- * ftp://sunsite.unc.edu/pub/Linux/system/Network/drivers/nidrivers.tar.gz
+- *
+- * Sources: 1) ni6510.c by M. Hipp
+- *          2) depca.c  by D.C. Davies
+- *          3) skeleton.c by D. Becker
+- *          4) Am7990 Local Area Network Controller for Ethernet (LANCE),
+- *             AMD, Pub. #05698, June 1989
+- *
+- * Many Thanks for helping me to get things working to:
+- *
+- *                 A. Cox (A.Cox@swansea.ac.uk)
+- *                 M. Hipp (mhipp@student.uni-tuebingen.de)
+- *                 R. Bolz (Schneider & Koch, Germany)
+- *
+- * See README.sk_g16 for details about limitations and bugs for the
+- * current version.
+- *
+- * To Do:
+- *        - Support of SK_G8 and other SK Network Cards.
+- *        - Autoset memory mapped RAM. Check for free memory and then
+- *          configure RAM correctly.
+- *        - SK_close should really set card in to initial state.
+- *        - Test if IRQ 3 is not switched off. Use autoirq() functionality.
+- *          (as in /drivers/net/skeleton.c)
+- *        - Implement Multicast addressing. At minimum something like
+- *          in depca.c.
+- *        - Redo the statistics part.
+- *        - Try to find out if the board is in 8 Bit or 16 Bit slot.
+- *          If in 8 Bit mode don't use IRQ 11.
+- *        - (Try to make it slightly faster.)
+- */
+-
+-/* to get some global routines like printf */
+-#include "etherboot.h"
+-/* to get the interface to the body of the program */
+-#include "nic.h"
+-
+-/* From linux/if_ether.h: */
+-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+-
+-#include "sk_g16.h"
+-
+-/*
+- * Schneider & Koch Card Definitions
+- * =================================
+- */
+-
+-#define SK_NAME   "SK_G16"
+-
+-/*
+- * SK_G16 Configuration
+- * --------------------
+- */
+-
+-/*
+- * Abbreviations
+- * -------------
+- *
+- * RAM - used for the 16KB shared memory
+- * Boot_ROM, ROM - are used for referencing the BootEPROM
+- *
+- * SK_ADDR is a symbolic constant used to configure
+- * the behaviour of the driver and the SK_G16.
+- *
+- * SK_ADDR defines the address where the RAM will be mapped into the real
+- *         host memory.
+- *         valid addresses are from 0xa0000 to 0xfc000 in 16Kbyte steps.
+- */
+-
+-#define SK_ADDR         0xcc000
+-
+-/*
+- * In POS3 are bits A14-A19 of the address bus. These bits can be set
+- * to choose the RAM address. That's why we only can choose the RAM address
+- * in 16KB steps.
+- */
+-
+-#define POS_ADDR       (rom_addr>>14)  /* Do not change this line */
+-
+-/*
+- * SK_G16 I/O PORT's + IRQ's + Boot_ROM locations
+- * ----------------------------------------------
+- */
+-
+-/*
+- * As nearly every card has also SK_G16 a specified I/O Port region and
+- * only a few possible IRQ's.
+- * In the Installation Guide from Schneider & Koch is listed a possible
+- * Interrupt IRQ2. IRQ2 is always IRQ9 in boards with two cascaded interrupt
+- * controllers. So we use in SK_IRQS IRQ9.
+- */
+-
+-/* Don't touch any of the following #defines. */
+-
+-#define SK_IO_PORTS     { 0x100, 0x180, 0x208, 0x220, 0x288, 0x320, 0x328, 0x390, 0 }
+-
+-/*
+- * SK_G16 POS REGISTERS
+- * --------------------
+- */
+-
+-/*
+- * SK_G16 has a Programmable Option Select (POS) Register.
+- * The POS is composed of 8 separate registers (POS0-7) which
+- * are I/O mapped on an address set by the W1 switch.
+- *
+- */
+-
+-#define SK_POS_SIZE 8           /* 8 I/O Ports are used by SK_G16 */
+-
+-#define SK_POS0     ioaddr      /* Card-ID Low (R) */
+-#define SK_POS1     ioaddr+1    /* Card-ID High (R) */
+-#define SK_POS2     ioaddr+2    /* Card-Enable, Boot-ROM Disable (RW) */
+-#define SK_POS3     ioaddr+3    /* Base address of RAM */
+-#define SK_POS4     ioaddr+4    /* IRQ */
+-
+-/* POS5 - POS7 are unused */
+-
+-/*
+- * SK_G16 MAC PREFIX
+- * -----------------
+- */
+-
+-/*
+- * Scheider & Koch manufacturer code (00:00:a5).
+- * This must be checked, that we are sure it is a SK card.
+- */
+-
+-#define SK_MAC0         0x00
+-#define SK_MAC1         0x00
+-#define SK_MAC2         0x5a
+-
+-/*
+- * SK_G16 ID
+- * ---------
+- */
+-
+-/*
+- * If POS0,POS1 contain the following ID, then we know
+- * at which I/O Port Address we are.
+- */
+-
+-#define SK_IDLOW  0xfd
+-#define SK_IDHIGH 0x6a
+-
+-
+-/*
+- * LANCE POS Bit definitions
+- * -------------------------
+- */
+-
+-#define SK_ROM_RAM_ON  (POS2_CARD)
+-#define SK_ROM_RAM_OFF (POS2_EPROM)
+-#define SK_ROM_ON      (inb(SK_POS2) & POS2_CARD)
+-#define SK_ROM_OFF     (inb(SK_POS2) | POS2_EPROM)
+-#define SK_RAM_ON      (inb(SK_POS2) | POS2_CARD)
+-#define SK_RAM_OFF     (inb(SK_POS2) & POS2_EPROM)
+-
+-#define POS2_CARD  0x0001              /* 1 = SK_G16 on      0 = off */
+-#define POS2_EPROM 0x0002              /* 1 = Boot EPROM off 0 = on */
+-
+-/*
+- * SK_G16 Memory mapped Registers
+- * ------------------------------
+- *
+- */
+-
+-#define SK_IOREG        (board->ioreg) /* LANCE data registers.     */
+-#define SK_PORT         (board->port)  /* Control, Status register  */
+-#define SK_IOCOM        (board->iocom) /* I/O Command               */
+-
+-/*
+- * SK_G16 Status/Control Register bits
+- * -----------------------------------
+- *
+- * (C) Controlreg (S) Statusreg
+- */
+-
+-/*
+- * Register transfer: 0 = no transfer
+- *                    1 = transferring data between LANCE and I/O reg
+- */
+-#define SK_IORUN        0x20
+-
+-/*
+- * LANCE interrupt: 0 = LANCE interrupt occurred
+- *                  1 = no LANCE interrupt occurred
+- */
+-#define SK_IRQ          0x10
+-
+-#define SK_RESET        0x08   /* Reset SK_CARD: 0 = RESET 1 = normal */
+-#define SK_RW           0x02   /* 0 = write to 1 = read from */
+-#define SK_ADR          0x01   /* 0 = REG DataPort 1 = RAP Reg addr port */
+-
+-
+-#define SK_RREG         SK_RW  /* Transferdirection to read from lance */
+-#define SK_WREG         0      /* Transferdirection to write to lance */
+-#define SK_RAP          SK_ADR /* Destination Register RAP */
+-#define SK_RDATA        0      /* Destination Register REG DataPort */
+-
+-/*
+- * SK_G16 I/O Command
+- * ------------------
+- */
+-
+-/*
+- * Any bitcombination sets the internal I/O bit (transfer will start)
+- * when written to I/O Command
+- */
+-
+-#define SK_DOIO         0x80   /* Do Transfer */
+-
+-/*
+- * LANCE RAP (Register Address Port).
+- * ---------------------------------
+- */
+-
+-/*
+- * The LANCE internal registers are selected through the RAP.
+- * The Registers are:
+- *
+- * CSR0 - Status and Control flags
+- * CSR1 - Low order bits of initialize block (bits 15:00)
+- * CSR2 - High order bits of initialize block (bits 07:00, 15:08 are reserved)
+- * CSR3 - Allows redefinition of the Bus Master Interface.
+- *        This register must be set to 0x0002, which means BSWAP = 0,
+- *        ACON = 1, BCON = 0;
+- *
+- */
+-
+-#define CSR0            0x00
+-#define CSR1            0x01
+-#define CSR2            0x02
+-#define CSR3            0x03
+-
+-/*
+- * General Definitions
+- * ===================
+- */
+-
+-/*
+- * Set the number of Tx and Rx buffers, using Log_2(# buffers).
+- * We have 16KB RAM which can be accessed by the LANCE. In the
+- * memory are not only the buffers but also the ring descriptors and
+- * the initialize block.
+- * Don't change anything unless you really know what you do.
+- */
+-
+-#define LC_LOG_TX_BUFFERS 1               /* (2 == 2^^1) 2 Transmit buffers */
+-#define LC_LOG_RX_BUFFERS 2               /* (8 == 2^^3) 8 Receive buffers */
+-
+-/* Descriptor ring sizes */
+-
+-#define TMDNUM (1 << (LC_LOG_TX_BUFFERS)) /* 2 Transmit descriptor rings */
+-#define RMDNUM (1 << (LC_LOG_RX_BUFFERS)) /* 8 Receive Buffers */
+-
+-/* Define Mask for setting RMD, TMD length in the LANCE init_block */
+-
+-#define TMDNUMMASK (LC_LOG_TX_BUFFERS << 29)
+-#define RMDNUMMASK (LC_LOG_RX_BUFFERS << 29)
+-
+-/*
+- * Data Buffer size is set to maximum packet length.
+- */
+-
+-#define PKT_BUF_SZ              1518
+-
+-/*
+- * The number of low I/O ports used by the ethercard.
+- */
+-
+-#define ETHERCARD_TOTAL_SIZE    SK_POS_SIZE
+-
+-/*
+- * Portreserve is there to mark the Card I/O Port region as used.
+- * Check_region is to check if the region at ioaddr with the size "size"
+- * is free or not.
+- * Snarf_region allocates the I/O Port region.
+- */
+-
+-#ifndef	HAVE_PORTRESERVE
+-
+-#define check_region(ioaddr1, size)              0
+-#define request_region(ioaddr1, size,name)       do ; while (0)
+-
+-#endif
+-
+-/*
+- * SK_DEBUG
+- *
+- * Here you can choose what level of debugging wanted.
+- *
+- * If SK_DEBUG and SK_DEBUG2 are undefined, then only the
+- *  necessary messages will be printed.
+- *
+- * If SK_DEBUG is defined, there will be many debugging prints
+- *  which can help to find some mistakes in configuration or even
+- *  in the driver code.
+- *
+- * If SK_DEBUG2 is defined, many many messages will be printed
+- *  which normally you don't need. I used this to check the interrupt
+- *  routine.
+- *
+- * (If you define only SK_DEBUG2 then only the messages for
+- *  checking interrupts will be printed!)
+- *
+- * Normal way of live is:
+- *
+- * For the whole thing get going let both symbolic constants
+- * undefined. If you face any problems and you know what's going
+- * on (you know something about the card and you can interpret some
+- * hex LANCE register output) then define SK_DEBUG
+- *
+- */
+-
+-#undef  SK_DEBUG	/* debugging */
+-#undef  SK_DEBUG2	/* debugging with more verbose report */
+-
+-#ifdef	SK_DEBUG
+-#define PRINTF(x) printf x
+-#else
+-#define PRINTF(x) /**/
+-#endif
+-
+-#ifdef	SK_DEBUG2
+-#define PRINTF2(x) printf x
+-#else
+-#define PRINTF2(x) /**/
+-#endif
+-
+-/*
+- * SK_G16 RAM
+- *
+- * The components are memory mapped and can be set in a region from
+- * 0x00000 through 0xfc000 in 16KB steps.
+- *
+- * The Network components are: dual ported RAM, Prom, I/O Reg, Status-,
+- * Controlregister and I/O Command.
+- *
+- * dual ported RAM: This is the only memory region which the LANCE chip
+- *      has access to. From the Lance it is addressed from 0x0000 to
+- *      0x3fbf. The host accesses it normally.
+- *
+- * PROM: The PROM obtains the ETHERNET-MAC-Address. It is realised as a
+- *       8-Bit PROM, this means only the 16 even addresses are used of the
+- *       32 Byte Address region. Access to a odd address results in invalid
+- *       data.
+- *
+- * LANCE I/O Reg: The I/O Reg is build of 4 single Registers, Low-Byte Write,
+- *       Hi-Byte Write, Low-Byte Read, Hi-Byte Read.
+- *       Transfer from or to the LANCE is always in 16Bit so Low and High
+- *       registers are always relevant.
+- *
+- *       The Data from the Readregister is not the data in the Writeregister!!
+- *
+- * Port: Status- and Controlregister.
+- *       Two different registers which share the same address, Status is
+- *       read-only, Control is write-only.
+- *
+- * I/O Command:
+- *       Any bitcombination written in here starts the transmission between
+- *       Host and LANCE.
+- */
+-
+-typedef struct
+-{
+-	unsigned char  ram[0x3fc0];   /* 16KB dual ported ram */
+-	unsigned char  rom[0x0020];   /* 32Byte PROM containing 6Byte MAC */
+-	unsigned char  res1[0x0010];  /* reserved */
+-	unsigned volatile short ioreg;/* LANCE I/O Register */
+-	unsigned volatile char  port; /* Statusregister and Controlregister */
+-	unsigned char  iocom;         /* I/O Command Register */
+-} SK_RAM;
+-
+-/* struct  */
+-
+-/*
+- * This is the structure for the dual ported ram. We
+- * have exactly 16 320 Bytes. In here there must be:
+- *
+- *     - Initialize Block   (starting at a word boundary)
+- *     - Receive and Transmit Descriptor Rings (quadword boundary)
+- *     - Data Buffers (arbitrary boundary)
+- *
+- * This is because LANCE has on SK_G16 only access to the dual ported
+- * RAM and nowhere else.
+- */
+-
+-struct SK_ram
+-{
+-    struct init_block ib;
+-    struct tmd tmde[TMDNUM];
+-    struct rmd rmde[RMDNUM];
+-    char tmdbuf[TMDNUM][PKT_BUF_SZ];
+-    char rmdbuf[RMDNUM][PKT_BUF_SZ];
+-};
+-
+-/*
+- * Structure where all necessary information is for ring buffer
+- * management and statistics.
+- */
+-
+-struct priv
+-{
+-    struct SK_ram *ram;  /* dual ported ram structure */
+-    struct rmd *rmdhead; /* start of receive ring descriptors */
+-    struct tmd *tmdhead; /* start of transmit ring descriptors */
+-    int        rmdnum;   /* actual used ring descriptor */
+-    int        tmdnum;   /* actual transmit descriptor for transmitting data */
+-    int        tmdlast;  /* last sent descriptor used for error handling, etc */
+-    void       *rmdbufs[RMDNUM]; /* pointer to the receive buffers */
+-    void       *tmdbufs[TMDNUM]; /* pointer to the transmit buffers */
+-};
+-
+-/* global variable declaration */
+-
+-/* static variables */
+-
+-static SK_RAM *board;  /* pointer to our memory mapped board components */
+-static unsigned short	ioaddr; /* base io address */
+-static struct priv	p_data;
+-
+-/* Macros */
+-
+-
+-/* Function Prototypes */
+-
+-/*
+- * Device Driver functions
+- * -----------------------
+- * See for short explanation of each function its definitions header.
+- */
+-
+-static int   SK_probe1(struct nic *nic, short ioaddr1);
+-
+-static void SK_reset(struct nic *nic);
+-static int SK_poll(struct nic *nic);
+-static void SK_transmit(
+-struct nic *nic,
+-const char *d,			/* Destination */
+-unsigned int t,			/* Type */
+-unsigned int s,			/* size */
+-const char *p);			/* Packet */
+-static void SK_disable(struct nic *nic);
+-struct nic *SK_probe(struct nic *nic, unsigned short *probe_addrs);
+-
+-/*
+- * LANCE Functions
+- * ---------------
+- */
+-
+-static int SK_lance_init(struct nic *nic, unsigned short mode);
+-static void SK_reset_board(void);
+-static void SK_set_RAP(int reg_number);
+-static int SK_read_reg(int reg_number);
+-static int SK_rread_reg(void);
+-static void SK_write_reg(int reg_number, int value);
+-
+-/*
+- * Debugging functions
+- * -------------------
+- */
+-
+-static void SK_print_pos(struct nic *nic, char *text);
+-static void SK_print_ram(struct nic *nic);
+-
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void SK_reset(struct nic *nic)
+-{
+-	/* put the card in its initial state */
+-	SK_lance_init(nic, MODE_NORMAL);
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int SK_poll(struct nic *nic)
+-{
+-	/* return true if there's an ethernet packet ready to read */
+-	struct priv *p;         /* SK_G16 private structure */
+-	struct rmd *rmdp;
+-	int csr0, rmdstat, packet_there;
+-    PRINTF2(("## %s: At beginning of SK_poll(). CSR0: %#hX\n",
+-           SK_NAME, SK_read_reg(CSR0)));
+-
+-	p = nic->priv_data;
+-    csr0 = SK_read_reg(CSR0);      /* store register for checking */
+-
+-    /*
+-     * Acknowledge all of the current interrupt sources, disable
+-     * Interrupts (INEA = 0)
+-     */
+-
+-    SK_write_reg(CSR0, csr0 & CSR0_CLRALL);
+-
+-    if (csr0 & CSR0_ERR) /* LANCE Error */
+-    {
+-	printf("%s: error: %#hX", SK_NAME, csr0);
+-
+-        if (csr0 & CSR0_MISS)      /* No place to store packet ? */
+-        {
+-		printf(", Packet dropped.");
+-        }
+-	putchar('\n');
+-    }
+-
+-    rmdp = p->rmdhead + p->rmdnum;
+-    packet_there = 0;
+-    /* As long as we own the next entry, check status and send
+-     * it up to higher layer
+-     */
+-
+-    while (!( (rmdstat = rmdp->u.s.status) & RX_OWN))
+-    {
+-	/*
+-         * Start and end of packet must be set, because we use
+-	 * the ethernet maximum packet length (1518) as buffer size.
+-	 *
+-	 * Because our buffers are at maximum OFLO and BUFF errors are
+-	 * not to be concerned (see Data sheet)
+-	 */
+-
+-	if ((rmdstat & (RX_STP | RX_ENP)) != (RX_STP | RX_ENP))
+-	{
+-	    /* Start of a frame > 1518 Bytes ? */
+-
+-	    if (rmdstat & RX_STP)
+-	    {
+-		printf("%s: packet too long\n", SK_NAME);
+-	    }
+-
+-	    /*
+-             * All other packets will be ignored until a new frame with
+-	     * start (RX_STP) set follows.
+-	     *
+-	     * What we do is just give descriptor free for new incoming
+-	     * packets.
+-	     */
+-
+-	    rmdp->u.s.status = RX_OWN;      /* Relinquish ownership to LANCE */
+-
+-	}
+-	else if (rmdstat & RX_ERR)          /* Receive Error ? */
+-	{
+-	    printf("%s: RX error: %#hX\n", SK_NAME, (int) rmdstat);
+-	    rmdp->u.s.status = RX_OWN;      /* Relinquish ownership to LANCE */
+-	}
+-	else /* We have a packet which can be queued for the upper layers */
+-	{
+-
+-	    int len = (rmdp->mlen & 0x0fff);  /* extract message length from receive buffer */
+-
+-	    /*
+-             * Copy data out of our receive descriptor into nic->packet.
+-	     *
+-	     * (rmdp->u.buffer & 0x00ffffff) -> get address of buffer and
+-	     * ignore status fields)
+-	     */
+-
+-	    memcpy(nic->packet, (unsigned char *) (rmdp->u.buffer & 0x00ffffff), nic->packetlen = len);
+-	    packet_there = 1;
+-
+-
+-	    /*
+-             * Packet is queued and marked for processing so we
+-	     * free our descriptor
+-	     */
+-
+-	    rmdp->u.s.status = RX_OWN;
+-
+-	    p->rmdnum++;
+-	    p->rmdnum %= RMDNUM;
+-
+-	    rmdp = p->rmdhead + p->rmdnum;
+-	}
+-    }
+-    SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */
+-	return (packet_there);
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void SK_transmit(
+-struct nic *nic,
+-const char *d,			/* Destination */
+-unsigned int t,			/* Type */
+-unsigned int s,			/* size */
+-const char *pack)		/* Packet */
+-{
+-	/* send the packet to destination */
+-    struct priv *p;         /* SK_G16 private structure */
+-    struct tmd *tmdp;
+-    short len;
+-    int csr0, i, tmdstat;
+-
+-    PRINTF2(("## %s: At beginning of SK_transmit(). CSR0: %#hX\n",
+-           SK_NAME, SK_read_reg(CSR0)));
+-	p = nic->priv_data;
+-	tmdp = p->tmdhead + p->tmdnum; /* Which descriptor for transmitting */
+-
+-	/* Copy data into dual ported ram */
+-
+-	memcpy(&p->ram->tmdbuf[p->tmdnum][0], d, ETH_ALEN);	/* dst */
+-	memcpy(&p->ram->tmdbuf[p->tmdnum][ETH_ALEN], nic->node_addr, ETH_ALEN); /* src */
+-	p->ram->tmdbuf[p->tmdnum][ETH_ALEN + ETH_ALEN] = t >> 8;	/* type */
+-	p->ram->tmdbuf[p->tmdnum][ETH_ALEN + ETH_ALEN + 1] = t;	/* type */
+-	memcpy(&p->ram->tmdbuf[p->tmdnum][ETH_HLEN], pack, s);
+-	s += ETH_HLEN;
+-	while (s < ETH_ZLEN)	/* pad to min length */
+-		p->ram->tmdbuf[p->tmdnum][s++] = 0;
+-	p->ram->tmde[p->tmdnum].status2 = 0x0;
+-
+-	/* Evaluate Packet length */
+-	len = ETH_ZLEN < s ? s : ETH_ZLEN;
+-
+-	/* Fill in Transmit Message Descriptor */
+-
+-	tmdp->blen = -len;            /* set length to transmit */
+-
+-	/*
+-	 * Packet start and end is always set because we use the maximum
+-	 * packet length as buffer length.
+-	 * Relinquish ownership to LANCE
+-	 */
+-
+-	tmdp->u.s.status = TX_OWN | TX_STP | TX_ENP;
+-
+-	/* Start Demand Transmission */
+-	SK_write_reg(CSR0, CSR0_TDMD | CSR0_INEA);
+-
+-    csr0 = SK_read_reg(CSR0);      /* store register for checking */
+-
+-    /*
+-     * Acknowledge all of the current interrupt sources, disable
+-     * Interrupts (INEA = 0)
+-     */
+-
+-    SK_write_reg(CSR0, csr0 & CSR0_CLRALL);
+-
+-    if (csr0 & CSR0_ERR) /* LANCE Error */
+-    {
+-	printf("%s: error: %#hX", SK_NAME, csr0);
+-
+-        if (csr0 & CSR0_MISS)      /* No place to store packet ? */
+-        {
+-		printf(", Packet dropped.");
+-        }
+-	putchar('\n');
+-    }
+-
+-
+-    /* Set next buffer */
+-    p->tmdlast++;
+-    p->tmdlast &= TMDNUM-1;
+-
+-    tmdstat = tmdp->u.s.status & 0xff00; /* filter out status bits 15:08 */
+-
+-    /*
+-     * We check status of transmitted packet.
+-     * see LANCE data-sheet for error explanation
+-     */
+-    if (tmdstat & TX_ERR) /* Error occurred */
+-    {
+-	printf("%s: TX error: %#hX %#hX\n", SK_NAME, (int) tmdstat,
+-		(int) tmdp->status2);
+-
+-	if (tmdp->status2 & TX_TDR)    /* TDR problems? */
+-	{
+-	    printf("%s: tdr-problems \n", SK_NAME);
+-	}
+-
+-        if (tmdp->status2 & TX_UFLO)   /* Underflow error ? */
+-        {
+-            /*
+-             * If UFLO error occurs it will turn transmitter of.
+-             * So we must reinit LANCE
+-             */
+-
+-            SK_lance_init(nic, MODE_NORMAL);
+-        }
+-
+-	tmdp->status2 = 0;             /* Clear error flags */
+-    }
+-
+-    SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */
+-
+-	/* Set pointer to next transmit buffer */
+-	p->tmdnum++;
+-	p->tmdnum &= TMDNUM-1;
+-
+-}
+-
+-/**************************************************************************
+-DISABLE - Turn off ethernet interface
+-***************************************************************************/
+-static void SK_disable(struct nic *nic)
+-{
+-    PRINTF(("## %s: At beginning of SK_disable(). CSR0: %#hX\n",
+-           SK_NAME, SK_read_reg(CSR0)));
+-    PRINTF(("%s: Shutting %s down CSR0 %#hX\n", SK_NAME, SK_NAME,
+-           (int) SK_read_reg(CSR0)));
+-
+-    SK_write_reg(CSR0, CSR0_STOP); /* STOP the LANCE */
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-struct nic *SK_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	unsigned short		*p;
+-	static unsigned short	io_addrs[] = SK_IO_PORTS;
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	putchar('\n');
+-	nic->priv_data = &p_data;
+-	if (probe_addrs == 0)
+-		probe_addrs = io_addrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
+-	{
+-		long		offset1, offset0 = inb(ioaddr);
+-		if ((offset0 == SK_IDLOW) &&
+-		 ((offset1 = inb(ioaddr + 1)) == SK_IDHIGH))
+-			if (SK_probe1(nic, ioaddr) >= 0)
+-				break;
+-	}
+-	/* if board found */
+-	if (ioaddr != 0)
+-	{
+-		/* point to NIC specific routines */
+-		nic->reset = SK_reset;
+-		nic->poll = SK_poll;
+-		nic->transmit = SK_transmit;
+-		nic->disable = SK_disable;
+-		return nic;
+-	}
+-	/* else */
+-	{
+-		return 0;
+-	}
+-}
+-
+-int SK_probe1(struct nic *nic, short ioaddr1)
+-{
+-    int i,j;                /* Counters */
+-    int sk_addr_flag = 0;   /* SK ADDR correct? 1 - no, 0 - yes */
+-    unsigned int rom_addr;  /* used to store RAM address used for POS_ADDR */
+-
+-    struct priv *p;         /* SK_G16 private structure */
+-
+-    if (SK_ADDR & 0x3fff || SK_ADDR < 0xa0000)
+-    {
+-       /*
+-        * Now here we could use a routine which searches for a free
+-        * place in the ram and set SK_ADDR if found. TODO.
+-        */
+-            printf("%s: SK_ADDR %#hX is not valid. Check configuration.\n",
+-                    SK_NAME, SK_ADDR);
+-            return -1;
+-    }
+-
+-    rom_addr = SK_ADDR;
+-
+-    outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */
+-    outb(POS_ADDR, SK_POS3);       /* Set RAM address */
+-    outb(SK_ROM_RAM_ON, SK_POS2);  /* RAM on, BOOT_ROM on */
+-#ifdef	SK_DEBUG
+-    SK_print_pos(nic, "POS registers after ROM, RAM config");
+-#endif
+-
+-    board = (SK_RAM *) rom_addr;
+-	PRINTF(("adr[0]: %hX, adr[1]: %hX, adr[2]: %hX\n",
+-	board->rom[0], board->rom[2], board->rom[4]));
+-
+-    /* Read in station address */
+-    for (i = 0, j = 0; i < ETH_ALEN; i++, j+=2)
+-    {
+-	*(nic->node_addr+i) = board->rom[j];
+-    }
+-
+-    /* Check for manufacturer code */
+-#ifdef	SK_DEBUG
+-    if (!(*(nic->node_addr+0) == SK_MAC0 &&
+-	  *(nic->node_addr+1) == SK_MAC1 &&
+-	  *(nic->node_addr+2) == SK_MAC2) )
+-    {
+-        PRINTF(("## %s: We did not find SK_G16 at RAM location.\n",
+-                SK_NAME));
+-	return -1;                     /* NO SK_G16 found */
+-    }
+-#endif
+-
+-    p = nic->priv_data;
+-
+-    /* Initialize private structure */
+-
+-    p->ram = (struct SK_ram *) rom_addr; /* Set dual ported RAM addr */
+-    p->tmdhead = &(p->ram)->tmde[0];     /* Set TMD head */
+-    p->rmdhead = &(p->ram)->rmde[0];     /* Set RMD head */
+-
+-    printf("Schneider & Koch G16 at %#hX, mem at %#hX, HW addr: %!\n",
+-	    (unsigned int) ioaddr, (unsigned int) p->ram, nic->node_addr);
+-
+-    /* Initialize buffer pointers */
+-
+-    for (i = 0; i < TMDNUM; i++)
+-    {
+-	p->tmdbufs[i] = p->ram->tmdbuf[i];
+-    }
+-
+-    for (i = 0; i < RMDNUM; i++)
+-    {
+-	p->rmdbufs[i] = p->ram->rmdbuf[i];
+-    }
+-    i = 0;
+-
+-    if (!(i = SK_lance_init(nic, MODE_NORMAL)))  /* LANCE init OK? */
+-    {
+-
+-#ifdef	SK_DEBUG
+-        /*
+-         * This debug block tries to stop LANCE,
+-         * reinit LANCE with transmitter and receiver disabled,
+-         * then stop again and reinit with NORMAL_MODE
+-         */
+-
+-        printf("## %s: After lance init. CSR0: %#hX\n",
+-               SK_NAME, SK_read_reg(CSR0));
+-        SK_write_reg(CSR0, CSR0_STOP);
+-        printf("## %s: LANCE stopped. CSR0: %#hX\n",
+-               SK_NAME, SK_read_reg(CSR0));
+-        SK_lance_init(nic, MODE_DTX | MODE_DRX);
+-        printf("## %s: Reinit with DTX + DRX off. CSR0: %#hX\n",
+-               SK_NAME, SK_read_reg(CSR0));
+-        SK_write_reg(CSR0, CSR0_STOP);
+-        printf("## %s: LANCE stopped. CSR0: %#hX\n",
+-               SK_NAME, SK_read_reg(CSR0));
+-        SK_lance_init(nic, MODE_NORMAL);
+-        printf("## %s: LANCE back to normal mode. CSR0: %#hX\n",
+-               SK_NAME, SK_read_reg(CSR0));
+-        SK_print_pos(nic, "POS regs before returning OK");
+-
+-#endif	/* SK_DEBUG */
+-
+-    }
+-    else /* LANCE init failed */
+-    {
+-
+-	PRINTF(("## %s: LANCE init failed: CSR0: %#hX\n",
+-               SK_NAME, SK_read_reg(CSR0)));
+-	return -1;
+-    }
+-
+-#ifdef	SK_DEBUG
+-    SK_print_pos(nic, "End of SK_probe1");
+-    SK_print_ram(nic);
+-#endif
+-
+-    return 0;                            /* Initialization done */
+-
+-} /* End of SK_probe1() */
+-
+-static int SK_lance_init(struct nic *nic, unsigned short mode)
+-{
+-    int i;
+-    struct priv *p = (struct priv *) nic->priv_data;
+-    struct tmd  *tmdp;
+-    struct rmd  *rmdp;
+-
+-    PRINTF(("## %s: At beginning of LANCE init. CSR0: %#hX\n",
+-           SK_NAME, SK_read_reg(CSR0)));
+-
+-    /* Reset LANCE */
+-    SK_reset_board();
+-
+-    /* Initialize TMD's with start values */
+-    p->tmdnum = 0;                   /* First descriptor for transmitting */
+-    p->tmdlast = 0;                  /* First descriptor for reading stats */
+-
+-    for (i = 0; i < TMDNUM; i++)     /* Init all TMD's */
+-    {
+-	tmdp = p->tmdhead + i;
+-
+-	tmdp->u.buffer = (unsigned long) p->tmdbufs[i]; /* assign buffer */
+-
+-	/* Mark TMD as start and end of packet */
+-	tmdp->u.s.status = TX_STP | TX_ENP;
+-    }
+-
+-
+-    /* Initialize RMD's with start values */
+-
+-    p->rmdnum = 0;                   /* First RMD which will be used */
+-
+-    for (i = 0; i < RMDNUM; i++)     /* Init all RMD's */
+-    {
+-	rmdp = p->rmdhead + i;
+-
+-
+-	rmdp->u.buffer = (unsigned long) p->rmdbufs[i]; /* assign buffer */
+-
+-	/*
+-         * LANCE must be owner at beginning so that he can fill in
+-	 * receiving packets, set status and release RMD
+-	 */
+-
+-	rmdp->u.s.status = RX_OWN;
+-
+-	rmdp->blen = -PKT_BUF_SZ;    /* Buffer Size in a two's complement */
+-
+-	rmdp->mlen = 0;              /* init message length */
+-
+-    }
+-
+-    /* Fill LANCE Initialize Block */
+-
+-    (p->ram)->ib.mode = mode;        /* Set operation mode */
+-
+-    for (i = 0; i < ETH_ALEN; i++)   /* Set physical address */
+-    {
+-	(p->ram)->ib.paddr[i] = *(nic->node_addr+i);
+-    }
+-
+-    for (i = 0; i < 8; i++)          /* Set multicast, logical address */
+-    {
+-	(p->ram)->ib.laddr[i] = 0;   /* We do not use logical addressing */
+-    }
+-
+-    /* Set ring descriptor pointers and set number of descriptors */
+-
+-    (p->ram)->ib.rdrp = (int)  p->rmdhead | RMDNUMMASK;
+-    (p->ram)->ib.tdrp = (int)  p->tmdhead | TMDNUMMASK;
+-
+-    /* Prepare LANCE Control and Status Registers */
+-
+-    SK_write_reg(CSR3, CSR3_ACON);   /* Ale Control !!!THIS MUST BE SET!!!! */
+-
+-    /*
+-     * LANCE addresses the RAM from 0x0000 to 0x3fbf and has no access to
+-     * PC Memory locations.
+-     *
+-     * In structure SK_ram is defined that the first thing in ram
+-     * is the initialization block. So his address is for LANCE always
+-     * 0x0000
+-     *
+-     * CSR1 contains low order bits 15:0 of initialization block address
+-     * CSR2 is built of:
+-     *    7:0  High order bits 23:16 of initialization block address
+-     *   15:8  reserved, must be 0
+-     */
+-
+-    /* Set initialization block address (must be on word boundary) */
+-    SK_write_reg(CSR1, 0);          /* Set low order bits 15:0 */
+-    SK_write_reg(CSR2, 0);          /* Set high order bits 23:16 */
+-
+-
+-    PRINTF(("## %s: After setting CSR1-3. CSR0: %#hX\n",
+-           SK_NAME, SK_read_reg(CSR0)));
+-
+-    /* Initialize LANCE */
+-
+-    /*
+-     * INIT = Initialize, when set, causes the LANCE to begin the
+-     * initialization procedure and access the Init Block.
+-     */
+-
+-    SK_write_reg(CSR0, CSR0_INIT);
+-
+-    /* Wait until LANCE finished initialization */
+-
+-    SK_set_RAP(CSR0);              /* Register Address Pointer to CSR0 */
+-
+-    for (i = 0; (i < 100) && !(SK_rread_reg() & CSR0_IDON); i++)
+-	; /* Wait until init done or go ahead if problems (i>=100) */
+-
+-    if (i >= 100) /* Something is wrong ! */
+-    {
+-	printf("%s: can't init am7990, status: %#hX "
+-	       "init_block: %#hX\n",
+-		SK_NAME, (int) SK_read_reg(CSR0),
+-		(unsigned int) &(p->ram)->ib);
+-
+-#ifdef	SK_DEBUG
+-	SK_print_pos(nic, "LANCE INIT failed");
+-#endif
+-
+-	return -1;                 /* LANCE init failed */
+-    }
+-
+-    PRINTF(("## %s: init done after %d ticks\n", SK_NAME, i));
+-
+-    /* Clear Initialize done, enable Interrupts, start LANCE */
+-
+-    SK_write_reg(CSR0, CSR0_IDON | CSR0_INEA | CSR0_STRT);
+-
+-    PRINTF(("## %s: LANCE started. CSR0: %#hX\n", SK_NAME,
+-            SK_read_reg(CSR0)));
+-
+-    return 0;                      /* LANCE is up and running */
+-
+-} /* End of SK_lance_init() */
+-
+-/* LANCE access functions
+- *
+- * ! CSR1-3 can only be accessed when in CSR0 the STOP bit is set !
+- */
+-
+-static void SK_reset_board(void)
+-{
+-    int i;
+-
+-	PRINTF(("## %s: At beginning of SK_reset_board.\n", SK_NAME));
+-    SK_PORT = 0x00;           /* Reset active */
+-    for (i = 0; i < 10 ; i++) /* Delay min 5ms */
+-	;
+-    SK_PORT = SK_RESET;       /* Set back to normal operation */
+-
+-} /* End of SK_reset_board() */
+-
+-static void SK_set_RAP(int reg_number)
+-{
+-    SK_IOREG = reg_number;
+-    SK_PORT  = SK_RESET | SK_RAP | SK_WREG;
+-    SK_IOCOM = SK_DOIO;
+-
+-    while (SK_PORT & SK_IORUN)
+-	;
+-} /* End of SK_set_RAP() */
+-
+-static int SK_read_reg(int reg_number)
+-{
+-    SK_set_RAP(reg_number);
+-
+-    SK_PORT  = SK_RESET | SK_RDATA | SK_RREG;
+-    SK_IOCOM = SK_DOIO;
+-
+-    while (SK_PORT & SK_IORUN)
+-	;
+-    return (SK_IOREG);
+-
+-} /* End of SK_read_reg() */
+-
+-static int SK_rread_reg(void)
+-{
+-    SK_PORT  = SK_RESET | SK_RDATA | SK_RREG;
+-
+-    SK_IOCOM = SK_DOIO;
+-
+-    while (SK_PORT & SK_IORUN)
+-	;
+-    return (SK_IOREG);
+-
+-} /* End of SK_rread_reg() */
+-
+-static void SK_write_reg(int reg_number, int value)
+-{
+-    SK_set_RAP(reg_number);
+-
+-    SK_IOREG = value;
+-    SK_PORT  = SK_RESET | SK_RDATA | SK_WREG;
+-    SK_IOCOM = SK_DOIO;
+-
+-    while (SK_PORT & SK_IORUN)
+-	;
+-} /* End of SK_write_reg */
+-
+-/*
+- * Debugging functions
+- * -------------------
+- */
+-
+-#ifdef	SK_DEBUG
+-static void SK_print_pos(struct nic *nic, char *text)
+-{
+-
+-    unsigned char pos0 = inb(SK_POS0),
+-		  pos1 = inb(SK_POS1),
+-		  pos2 = inb(SK_POS2),
+-		  pos3 = inb(SK_POS3),
+-		  pos4 = inb(SK_POS4);
+-
+-
+-    printf("## %s: %s.\n"
+-           "##   pos0=%#hX pos1=%#hX pos2=%#hX pos3=%#hX pos4=%#hX\n",
+-           SK_NAME, text, pos0, pos1, pos2, (pos3<<14), pos4);
+-
+-} /* End of SK_print_pos() */
+-
+-static void SK_print_ram(struct nic *nic)
+-{
+-
+-    int i;
+-    struct priv *p = (struct priv *) nic->priv_data;
+-
+-    printf("## %s: RAM Details.\n"
+-           "##   RAM at %#hX tmdhead: %#hX rmdhead: %#hX initblock: %#hX\n",
+-           SK_NAME,
+-           (unsigned int) p->ram,
+-           (unsigned int) p->tmdhead,
+-           (unsigned int) p->rmdhead,
+-           (unsigned int) &(p->ram)->ib);
+-
+-    printf("##   ");
+-
+-    for(i = 0; i < TMDNUM; i++)
+-    {
+-           if (!(i % 3)) /* Every third line do a newline */
+-           {
+-               printf("\n##   ");
+-           }
+-        printf("tmdbufs%d: %#hX ", (i+1), (int) p->tmdbufs[i]);
+-    }
+-    printf("##   ");
+-
+-    for(i = 0; i < RMDNUM; i++)
+-    {
+-         if (!(i % 3)) /* Every third line do a newline */
+-           {
+-               printf("\n##   ");
+-           }
+-        printf("rmdbufs%d: %#hX ", (i+1), (int) p->rmdbufs[i]);
+-    }
+-    putchar('\n');
+-
+-} /* End of SK_print_ram() */
+-#endif
+diff -Naur grub-0.97.orig/netboot/sk_g16.h grub-0.97/netboot/sk_g16.h
+--- grub-0.97.orig/netboot/sk_g16.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/sk_g16.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,168 +0,0 @@
+-/*-
+- *
+- * This software may be used and distributed according to the terms
+- * of the GNU Public License, incorporated herein by reference.
+- *
+- * Module         : sk_g16.h
+- * Version        : $Revision: 1.3 $
+- *
+- * Author         : M.Hipp (mhipp@student.uni-tuebingen.de)
+- * changes by     : Patrick J.D. Weichmann
+- *
+- * Date Created   : 94/05/25
+- *
+- * Description    : In here are all necessary definitions of
+- *                  the am7990 (LANCE) chip used for writing a
+- *                  network device driver which uses this chip
+- *
+- * $Log: sk_g16.h,v $
+- * Revision 1.3  2000/07/29 19:22:54  okuji
+- * update the network support to etherboot-4.6.4.
+- *
+--*/
+-
+-#ifndef	SK_G16_H
+-
+-#define SK_G16_H
+-
+-
+-/*
+- *	Control and Status Register 0 (CSR0) bit definitions
+- *
+- * (R=Readable) (W=Writeable) (S=Set on write) (C-Clear on write)
+- *
+- */
+-
+-#define CSR0_ERR	0x8000	/* Error summary (R) */
+-#define CSR0_BABL	0x4000	/* Babble transmitter timeout error (RC) */
+-#define CSR0_CERR	0x2000	/* Collision Error (RC) */
+-#define CSR0_MISS	0x1000	/* Missed packet (RC) */
+-#define CSR0_MERR	0x0800	/* Memory Error  (RC) */
+-#define CSR0_RINT	0x0400	/* Receiver Interrupt (RC) */
+-#define CSR0_TINT       0x0200	/* Transmit Interrupt (RC) */
+-#define CSR0_IDON	0x0100	/* Initialization Done (RC) */
+-#define CSR0_INTR	0x0080	/* Interrupt Flag (R) */
+-#define CSR0_INEA	0x0040	/* Interrupt Enable (RW) */
+-#define CSR0_RXON	0x0020	/* Receiver on (R) */
+-#define CSR0_TXON	0x0010  /* Transmitter on (R) */
+-#define CSR0_TDMD	0x0008	/* Transmit Demand (RS) */
+-#define CSR0_STOP	0x0004	/* Stop (RS) */
+-#define CSR0_STRT	0x0002	/* Start (RS) */
+-#define CSR0_INIT	0x0001	/* Initialize (RS) */
+-
+-#define CSR0_CLRALL     0x7f00  /* mask for all clearable bits */
+-
+-/*
+- *    Control and Status Register 3 (CSR3) bit definitions
+- *
+- */
+-
+-#define CSR3_BSWAP	0x0004	/* Byte Swap (RW) */
+-#define CSR3_ACON	0x0002  /* ALE Control (RW) */
+-#define CSR3_BCON	0x0001	/* Byte Control (RW) */
+-
+-/*
+- *	Initialization Block Mode operation Bit Definitions.
+- */
+-
+-#define MODE_PROM	0x8000	/* Promiscuous Mode */
+-#define MODE_INTL	0x0040  /* Internal Loopback */
+-#define MODE_DRTY	0x0020  /* Disable Retry */
+-#define MODE_COLL	0x0010	/* Force Collision */
+-#define MODE_DTCR	0x0008	/* Disable Transmit CRC) */
+-#define MODE_LOOP	0x0004	/* Loopback */
+-#define MODE_DTX	0x0002	/* Disable the Transmitter */
+-#define MODE_DRX	0x0001  /* Disable the Receiver */
+-
+-#define MODE_NORMAL	0x0000  /* Normal operation mode */
+-
+-/*
+- *	Receive message descriptor status bit definitions.
+- */
+-
+-#define RX_OWN		0x80	/* Owner bit 0 = host, 1 = lance */
+-#define RX_ERR		0x40	/* Error Summary */
+-#define RX_FRAM		0x20	/* Framing Error */
+-#define RX_OFLO		0x10	/* Overflow Error */
+-#define RX_CRC		0x08	/* CRC Error */
+-#define RX_BUFF		0x04	/* Buffer Error */
+-#define RX_STP		0x02	/* Start of Packet */
+-#define RX_ENP		0x01	/* End of Packet */
+-
+-
+-/*
+- *	Transmit message descriptor status bit definitions.
+- */
+-
+-#define TX_OWN		0x80	/* Owner bit 0 = host, 1 = lance */
+-#define TX_ERR		0x40    /* Error Summary */
+-#define TX_MORE		0x10	/* More the 1 retry needed to Xmit */
+-#define TX_ONE		0x08	/* One retry needed to Xmit */
+-#define TX_DEF		0x04	/* Deferred */
+-#define TX_STP		0x02	/* Start of Packet */
+-#define TX_ENP		0x01	/* End of Packet */
+-
+-/*
+- *      Transmit status (2) (valid if TX_ERR == 1)
+- */
+-
+-#define TX_BUFF		0x8000  /* Buffering error (no ENP) */
+-#define TX_UFLO		0x4000  /* Underflow (late memory) */
+-#define TX_LCOL		0x1000  /* Late collision */
+-#define TX_LCAR		0x0400  /* Loss of Carrier */
+-#define TX_RTRY		0x0200  /* Failed after 16 retransmissions  */
+-#define TX_TDR          0x003f  /* Time-domain-reflectometer-value */
+-
+-
+-/*
+- * Structures used for Communication with the LANCE
+- */
+-
+-/* LANCE Initialize Block */
+-
+-struct init_block
+-{
+-  unsigned short mode;     /* Mode Register */
+-  unsigned char  paddr[6]; /* Physical Address (MAC) */
+-  unsigned char  laddr[8]; /* Logical Filter Address (not used) */
+-  unsigned int   rdrp;     /* Receive Descriptor Ring pointer */
+-  unsigned int   tdrp;     /* Transmit Descriptor Ring pointer */
+-};
+-
+-
+-/* Receive Message Descriptor Entry */
+-
+-struct rmd
+-{
+-  union rmd_u
+-  {
+-    unsigned long buffer;     /* Address of buffer */
+-    struct rmd_s
+-    {
+-      unsigned char unused[3];
+-      unsigned volatile char status;   /* Status Bits */
+-    } s;
+-  } u;
+-  volatile short blen;        /* Buffer Length (two's complement) */
+-  unsigned short mlen;        /* Message Byte Count */
+-};
+-
+-
+-/* Transmit Message Descriptor Entry */
+-
+-struct tmd
+-{
+-  union tmd_u
+-  {
+-    unsigned long  buffer;    /* Address of buffer */
+-    struct tmd_s
+-    {
+-      unsigned char unused[3];
+-      unsigned volatile char status;   /* Status Bits */
+-    } s;
+-  } u;
+-  unsigned short blen;             /* Buffer Length (two's complement) */
+-  unsigned volatile short status2; /* Error Status Bits */
+-};
+-
+-#endif	/* End of SK_G16_H */
+diff -Naur grub-0.97.orig/netboot/smc9000.c grub-0.97/netboot/smc9000.c
+--- grub-0.97.orig/netboot/smc9000.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/smc9000.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,522 +0,0 @@
+- /*------------------------------------------------------------------------
+- * smc9000.c
+- * This is a Etherboot driver for SMC's 9000 series of Ethernet cards.
+- *
+- * Copyright (C) 1998 Daniel Engström <daniel.engstrom@riksnett.no>
+- * Based on the Linux SMC9000 driver, smc9194.c by Eric Stahlman
+- * Copyright (C) 1996 by Erik Stahlman <eric@vt.edu>
+- *
+- * This software may be used and distributed according to the terms
+- * of the GNU Public License, incorporated herein by reference.
+- *
+- * "Features" of the SMC chip:
+- *   4608 byte packet memory. ( for the 91C92/4.  Others have more )
+- *   EEPROM for configuration
+- *   AUI/TP selection
+- *
+- * Authors
+- *	Erik Stahlman				<erik@vt.edu>
+- *      Daniel Engström                         <daniel.engstrom@riksnett.no>
+- *
+- * History
+- * 98-09-25              Daniel Engström Etherboot driver crated from Eric's
+- *                                       Linux driver.
+- *
+- *---------------------------------------------------------------------------*/
+-#define LINUX_OUT_MACROS 1
+-#define SMC9000_VERBOSE  1
+-#define SMC9000_DEBUG    0
+-
+-#include "etherboot.h"
+-#include "nic.h"
+-#include "cards.h"
+-#include "smc9000.h"
+-
+-# define _outb outb
+-# define _outw outw
+-
+-static const char       smc9000_version[] = "Version 0.99 98-09-30";
+-static unsigned int	smc9000_base=0;
+-static const char       *interfaces[ 2 ] = { "TP", "AUI" };
+-static const char       *chip_ids[ 15 ] =  {
+-   NULL, NULL, NULL,
+-   /* 3 */ "SMC91C90/91C92",
+-   /* 4 */ "SMC91C94",
+-   /* 5 */ "SMC91C95",
+-   NULL,
+-   /* 7 */ "SMC91C100",
+-   /* 8 */ "SMC91C100FD",
+-   NULL, NULL, NULL,
+-   NULL, NULL, NULL
+-};
+-static const char      smc91c96_id[] = "SMC91C96";
+-
+-/*
+- * Function: smc_reset( int ioaddr )
+- * Purpose:
+- *	This sets the SMC91xx chip to its normal state, hopefully from whatever
+- *	mess that any other DOS driver has put it in.
+- *
+- * Maybe I should reset more registers to defaults in here?  SOFTRESET  should
+- * do that for me.
+- *
+- * Method:
+- *	1.  send a SOFT RESET
+- *	2.  wait for it to finish
+- *	3.  reset the memory management unit
+- *      4.  clear all interrupts
+- *
+-*/
+-static void smc_reset(int ioaddr)
+-{
+-   /* This resets the registers mostly to defaults, but doesn't
+-    * affect EEPROM.  That seems unnecessary */
+-   SMC_SELECT_BANK(ioaddr, 0);
+-   _outw( RCR_SOFTRESET, ioaddr + RCR );
+-
+-   /* this should pause enough for the chip to be happy */
+-   SMC_DELAY(ioaddr);
+-
+-   /* Set the transmit and receive configuration registers to
+-    * default values */
+-   _outw(RCR_CLEAR, ioaddr + RCR);
+-   _outw(TCR_CLEAR, ioaddr + TCR);
+-
+-   /* Reset the MMU */
+-   SMC_SELECT_BANK(ioaddr, 2);
+-   _outw( MC_RESET, ioaddr + MMU_CMD );
+-
+-   /* Note:  It doesn't seem that waiting for the MMU busy is needed here,
+-    * but this is a place where future chipsets _COULD_ break.  Be wary
+-    * of issuing another MMU command right after this */
+-   _outb(0, ioaddr + INT_MASK);
+-}
+-
+-
+-/*----------------------------------------------------------------------
+- * Function: smc_probe( int ioaddr )
+- *
+- * Purpose:
+- *	Tests to see if a given ioaddr points to an SMC9xxx chip.
+- *	Returns a 0 on success
+- *
+- * Algorithm:
+- *	(1) see if the high byte of BANK_SELECT is 0x33
+- *	(2) compare the ioaddr with the base register's address
+- *	(3) see if I recognize the chip ID in the appropriate register
+- *
+- * ---------------------------------------------------------------------
+- */
+-static int smc_probe( int ioaddr )
+-{
+-   word bank;
+-   word	revision_register;
+-   word base_address_register;
+-
+-   /* First, see if the high byte is 0x33 */
+-   bank = inw(ioaddr + BANK_SELECT);
+-   if ((bank & 0xFF00) != 0x3300) {
+-      return -1;
+-   }
+-   /* The above MIGHT indicate a device, but I need to write to further
+-    *	test this.  */
+-   _outw(0x0, ioaddr + BANK_SELECT);
+-   bank = inw(ioaddr + BANK_SELECT);
+-   if ((bank & 0xFF00) != 0x3300) {
+-      return -1;
+-   }
+-
+-   /* well, we've already written once, so hopefully another time won't
+-    *  hurt.  This time, I need to switch the bank register to bank 1,
+-    *  so I can access the base address register */
+-   SMC_SELECT_BANK(ioaddr, 1);
+-   base_address_register = inw(ioaddr + BASE);
+-
+-   if (ioaddr != (base_address_register >> 3 & 0x3E0))  {
+-#ifdef	SMC9000_VERBOSE
+-      printf("SMC9000: IOADDR %hX doesn't match configuration (%hX)."
+-	     "Probably not a SMC chip\n",
+-	     ioaddr, base_address_register >> 3 & 0x3E0);
+-#endif
+-      /* well, the base address register didn't match.  Must not have
+-       * been a SMC chip after all. */
+-      return -1;
+-   }
+-
+-
+-   /* check if the revision register is something that I recognize.
+-    * These might need to be added to later, as future revisions
+-    * could be added.  */
+-   SMC_SELECT_BANK(ioaddr, 3);
+-   revision_register  = inw(ioaddr + REVISION);
+-   if (!chip_ids[(revision_register >> 4) & 0xF]) {
+-      /* I don't recognize this chip, so... */
+-#ifdef	SMC9000_VERBOSE
+-      printf("SMC9000: IO %hX: Unrecognized revision register:"
+-	     " %hX, Contact author.\n", ioaddr, revision_register);
+-#endif
+-      return -1;
+-   }
+-
+-   /* at this point I'll assume that the chip is an SMC9xxx.
+-    * It might be prudent to check a listing of MAC addresses
+-    * against the hardware address, or do some other tests. */
+-   return 0;
+-}
+-
+-
+-/**************************************************************************
+- * ETH_RESET - Reset adapter
+- ***************************************************************************/
+-
+-static void smc9000_reset(struct nic *nic)
+-{
+-   smc_reset(smc9000_base);
+-}
+-
+-/**************************************************************************
+- * ETH_TRANSMIT - Transmit a frame
+- ***************************************************************************/
+-static void smc9000_transmit(
+-	struct nic *nic,
+-	const char *d,			/* Destination */
+-	unsigned int t,			/* Type */
+-	unsigned int s,			/* size */
+-	const char *p)			/* Packet */
+-{
+-   word length; /* real, length incl. header */
+-   word numPages;
+-   unsigned long time_out;
+-   byte	packet_no;
+-   word status;
+-   int i;
+-
+-   /* We dont pad here since we can have the hardware doing it for us */
+-   length = (s + ETH_HLEN + 1)&~1;
+-
+-   /* convert to MMU pages */
+-   numPages = length / 256;
+-
+-   if (numPages > 7 ) {
+-#ifdef	SMC9000_VERBOSE
+-      printf("SMC9000: Far too big packet error. \n");
+-#endif
+-      return;
+-   }
+-
+-   /* dont try more than, say 30 times */
+-   for (i=0;i<30;i++) {
+-      /* now, try to allocate the memory */
+-      SMC_SELECT_BANK(smc9000_base, 2);
+-      _outw(MC_ALLOC | numPages, smc9000_base + MMU_CMD);
+-
+-      status = 0;
+-      /* wait for the memory allocation to finnish */
+-      for (time_out = currticks() + 5*TICKS_PER_SEC; currticks() < time_out; ) {
+-	 status = inb(smc9000_base + INTERRUPT);
+-	 if ( status & IM_ALLOC_INT ) {
+-	    /* acknowledge the interrupt */
+-	    _outb(IM_ALLOC_INT, smc9000_base + INTERRUPT);
+-	    break;
+-	 }
+-      }
+-
+-      if ((status & IM_ALLOC_INT) != 0 ) {
+-	 /* We've got the memory */
+-	 break;
+-      } else {
+-	 printf("SMC9000: Memory allocation timed out, resetting MMU.\n");
+-	 _outw(MC_RESET, smc9000_base + MMU_CMD);
+-      }
+-   }
+-
+-   /* If I get here, I _know_ there is a packet slot waiting for me */
+-   packet_no = inb(smc9000_base + PNR_ARR + 1);
+-   if (packet_no & 0x80) {
+-      /* or isn't there?  BAD CHIP! */
+-      printf("SMC9000: Memory allocation failed. \n");
+-      return;
+-   }
+-
+-   /* we have a packet address, so tell the card to use it */
+-   _outb(packet_no, smc9000_base + PNR_ARR);
+-
+-   /* point to the beginning of the packet */
+-   _outw(PTR_AUTOINC, smc9000_base + POINTER);
+-
+-#if	SMC9000_DEBUG > 2
+-   printf("Trying to xmit packet of length %hX\n", length );
+-#endif
+-
+-   /* send the packet length ( +6 for status, length and ctl byte )
+-    * and the status word ( set to zeros ) */
+-   _outw(0, smc9000_base + DATA_1 );
+-
+-   /* send the packet length ( +6 for status words, length, and ctl) */
+-   _outb((length+6) & 0xFF,  smc9000_base + DATA_1);
+-   _outb((length+6) >> 8 ,   smc9000_base + DATA_1);
+-
+-   /* Write the contents of the packet */
+-
+-   /* The ethernet header first... */
+-   outsw(smc9000_base + DATA_1, d, ETH_ALEN >> 1);
+-   outsw(smc9000_base + DATA_1, nic->node_addr, ETH_ALEN >> 1);
+-   _outw(htons(t), smc9000_base + DATA_1);
+-
+-   /* ... the data ... */
+-   outsw(smc9000_base + DATA_1 , p, s >> 1);
+-
+-   /* ... and the last byte, if there is one.   */
+-   if ((s & 1) == 0) {
+-      _outw(0, smc9000_base + DATA_1);
+-   } else {
+-      _outb(p[s-1], smc9000_base + DATA_1);
+-      _outb(0x20, smc9000_base + DATA_1);
+-   }
+-
+-   /* and let the chipset deal with it */
+-   _outw(MC_ENQUEUE , smc9000_base + MMU_CMD);
+-
+-   status = 0; time_out = currticks() + 5*TICKS_PER_SEC;
+-   do {
+-      status = inb(smc9000_base + INTERRUPT);
+-
+-      if ((status & IM_TX_INT ) != 0) {
+-	 word tx_status;
+-
+-	 /* ack interrupt */
+-	 _outb(IM_TX_INT, smc9000_base + INTERRUPT);
+-
+-	 packet_no = inw(smc9000_base + FIFO_PORTS);
+-	 packet_no &= 0x7F;
+-
+-	 /* select this as the packet to read from */
+-	 _outb( packet_no, smc9000_base + PNR_ARR );
+-
+-	 /* read the first word from this packet */
+-	 _outw( PTR_AUTOINC | PTR_READ, smc9000_base + POINTER );
+-
+-	 tx_status = inw( smc9000_base + DATA_1 );
+-
+-	 if (0 == (tx_status & TS_SUCCESS)) {
+-#ifdef	SMC9000_VERBOSE
+-	    printf("SMC9000: TX FAIL STATUS: %hX \n", tx_status);
+-#endif
+-	    /* re-enable transmit */
+-	    SMC_SELECT_BANK(smc9000_base, 0);
+-	    _outw(inw(smc9000_base + TCR ) | TCR_ENABLE, smc9000_base + TCR );
+-	 }
+-
+-	 /* kill the packet */
+-	 SMC_SELECT_BANK(smc9000_base, 2);
+-	 _outw(MC_FREEPKT, smc9000_base + MMU_CMD);
+-
+-	 return;
+-      }
+-   }while(currticks() < time_out);
+-
+-   printf("SMC9000: Waring TX timed out, resetting board\n");
+-   smc_reset(smc9000_base);
+-   return;
+-}
+-
+-/**************************************************************************
+- * ETH_POLL - Wait for a frame
+- ***************************************************************************/
+-static int smc9000_poll(struct nic *nic)
+-{
+-   if(!smc9000_base)
+-     return 0;
+-
+-   SMC_SELECT_BANK(smc9000_base, 2);
+-   if (inw(smc9000_base + FIFO_PORTS) & FP_RXEMPTY)
+-     return 0;
+-
+-   /*  start reading from the start of the packet */
+-   _outw(PTR_READ | PTR_RCV | PTR_AUTOINC, smc9000_base + POINTER);
+-
+-   /* First read the status and check that we're ok */
+-   if (!(inw(smc9000_base + DATA_1) & RS_ERRORS)) {
+-      /* Next: read the packet length and mask off the top bits */
+-      nic->packetlen = (inw(smc9000_base + DATA_1) & 0x07ff);
+-
+-      /* the packet length includes the 3 extra words */
+-      nic->packetlen -= 6;
+-#if	SMC9000_DEBUG > 2
+-      printf(" Reading %d words (and %d byte(s))\n",
+-	       (nic->packetlen >> 1), nic->packetlen & 1);
+-#endif
+-      /* read the packet (and the last "extra" word) */
+-      insw(smc9000_base + DATA_1, nic->packet, (nic->packetlen+2) >> 1);
+-      /* is there an odd last byte ? */
+-      if (nic->packet[nic->packetlen+1] & 0x20)
+-	 nic->packetlen++;
+-
+-      /*  error or good, tell the card to get rid of this packet */
+-      _outw(MC_RELEASE, smc9000_base + MMU_CMD);
+-      return 1;
+-   }
+-
+-   printf("SMC9000: RX error\n");
+-   /*  error or good, tell the card to get rid of this packet */
+-   _outw(MC_RELEASE, smc9000_base + MMU_CMD);
+-   return 0;
+-}
+-
+-static void smc9000_disable(struct nic *nic)
+-{
+-   if(!smc9000_base)
+-     return;
+-
+-   /* no more interrupts for me */
+-   SMC_SELECT_BANK(smc9000_base, 2);
+-   _outb( 0, smc9000_base + INT_MASK);
+-
+-   /* and tell the card to stay away from that nasty outside world */
+-   SMC_SELECT_BANK(smc9000_base, 0);
+-   _outb( RCR_CLEAR, smc9000_base + RCR );
+-   _outb( TCR_CLEAR, smc9000_base + TCR );
+-}
+-
+-/**************************************************************************
+- * ETH_PROBE - Look for an adapter
+- ***************************************************************************/
+-
+-struct nic *smc9000_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-   unsigned short   revision;
+-   int	            memory;
+-   int              media;
+-   const char *	    version_string;
+-   const char *	    if_string;
+-   int              i;
+-
+-   /*
+-    * the SMC9000 can be at any of the following port addresses.  To change,
+-    * for a slightly different card, you can add it to the array.  Keep in
+-    * mind that the array must end in zero.
+-    */
+-   static unsigned short portlist[] = {
+-#ifdef	SMC9000_SCAN
+-      SMC9000_SCAN,
+-#else
+-      0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
+-      0x300, 0x320, 0x340, 0x360, 0x380, 0x3A0, 0x3C0, 0x3E0,
+-#endif
+-      0 };
+-
+-   printf("\nSMC9000 %s\n", smc9000_version);
+-#ifdef	SMC9000_VERBOSE
+-   printf("Copyright (C) 1998 Daniel Engstr\x94m\n");
+-   printf("Copyright (C) 1996 Eric Stahlman\n");
+-#endif
+-   /* if no addresses supplied, fall back on defaults */
+-   if (probe_addrs == 0 || probe_addrs[0] == 0)
+-     probe_addrs = portlist;
+-
+-   /* check every ethernet address */
+-   for (i = 0; probe_addrs[i]; i++) {
+-      /* check this specific address */
+-      if (smc_probe(probe_addrs[i]) == 0)
+-	smc9000_base = probe_addrs[i];
+-   }
+-
+-   /* couldn't find anything */
+-   if(0 == smc9000_base)
+-     goto out;
+-
+-   /*
+-    * Get the MAC address ( bank 1, regs 4 - 9 )
+-    */
+-   SMC_SELECT_BANK(smc9000_base, 1);
+-   for ( i = 0; i < 6; i += 2 ) {
+-      word address;
+-
+-      address = inw(smc9000_base + ADDR0 + i);
+-      nic->node_addr[i+1] = address >> 8;
+-      nic->node_addr[i] = address & 0xFF;
+-   }
+-
+-
+-   /* get the memory information */
+-   SMC_SELECT_BANK(smc9000_base, 0);
+-   memory = ( inw(smc9000_base + MCR) >> 9 )  & 0x7;  /* multiplier */
+-   memory *= 256 * (inw(smc9000_base + MIR) & 0xFF);
+-
+-   /*
+-    * Now, I want to find out more about the chip.  This is sort of
+-    * redundant, but it's cleaner to have it in both, rather than having
+-    * one VERY long probe procedure.
+-    */
+-   SMC_SELECT_BANK(smc9000_base, 3);
+-   revision  = inw(smc9000_base + REVISION);
+-   version_string = chip_ids[(revision >> 4) & 0xF];
+-
+-   if (((revision & 0xF0) >> 4 == CHIP_9196) &&
+-       ((revision & 0x0F) >= REV_9196)) {
+-      /* This is a 91c96. 'c96 has the same chip id as 'c94 (4) but
+-       * a revision starting at 6 */
+-      version_string = smc91c96_id;
+-   }
+-
+-   if ( !version_string ) {
+-      /* I shouldn't get here because this call was done before.... */
+-      goto out;
+-   }
+-
+-   /* is it using AUI or 10BaseT ? */
+-   SMC_SELECT_BANK(smc9000_base, 1);
+-   if (inw(smc9000_base + CONFIG) & CFG_AUI_SELECT)
+-     media = 2;
+-   else
+-     media = 1;
+-
+-   if_string = interfaces[media - 1];
+-
+-   /* now, reset the chip, and put it into a known state */
+-   smc_reset(smc9000_base);
+-
+-   printf("%s rev:%d I/O port:%hX Interface:%s RAM:%d bytes \n",
+-	  version_string, revision & 0xF,
+-	  smc9000_base, if_string, memory );
+-   /*
+-    * Print the Ethernet address
+-    */
+-   printf("Ethernet MAC address: %!\n", nic->node_addr);
+-
+-   SMC_SELECT_BANK(smc9000_base, 0);
+-
+-   /* see the header file for options in TCR/RCR NORMAL*/
+-   _outw(TCR_NORMAL, smc9000_base + TCR);
+-   _outw(RCR_NORMAL, smc9000_base + RCR);
+-
+-   /* Select which interface to use */
+-   SMC_SELECT_BANK(smc9000_base, 1);
+-   if ( media == 1 ) {
+-      _outw( inw( smc9000_base + CONFIG ) & ~CFG_AUI_SELECT,
+-	   smc9000_base + CONFIG );
+-   }
+-   else if ( media == 2 ) {
+-      _outw( inw( smc9000_base + CONFIG ) | CFG_AUI_SELECT,
+-	   smc9000_base + CONFIG );
+-   }
+-
+-   nic->reset = smc9000_reset;
+-   nic->poll = smc9000_poll;
+-   nic->transmit = smc9000_transmit;
+-   nic->disable = smc9000_disable;
+-
+-
+-   return nic;
+-
+-out:
+-#ifdef	SMC9000_VERBOSE
+-   printf("No SMC9000 adapters found\n");
+-#endif
+-   smc9000_base = 0;
+-
+-   return (0);
+-}
+-
+-
+-
+diff -Naur grub-0.97.orig/netboot/smc9000.h grub-0.97/netboot/smc9000.h
+--- grub-0.97.orig/netboot/smc9000.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/smc9000.h	1970-01-01 00:00:00.000000000 +0000
+@@ -1,205 +0,0 @@
+-/*------------------------------------------------------------------------
+- * smc9000.h
+- *
+- * Copyright (C) 1998 by Daniel Engström
+- * Copyright (C) 1996 by Erik Stahlman
+- *
+- * This software may be used and distributed according to the terms
+- * of the GNU Public License, incorporated herein by reference.
+- *
+- * This file contains register information and access macros for
+- * the SMC91xxx chipset.
+- *
+- * Information contained in this file was obtained from the SMC91C94
+- * manual from SMC.  To get a copy, if you really want one, you can find
+- * information under www.smsc.com in the components division.
+- * ( this thanks to advice from Donald Becker ).
+- *
+- * Authors
+- *      Daniel Engström                         <daniel.engstrom@riksnett.no>
+- *	Erik Stahlman				<erik@vt.edu>
+- *
+- * History
+- * 96-01-06		 Erik Stahlman   moved definitions here from main .c
+- *                                       file
+- * 96-01-19		 Erik Stahlman	 polished this up some, and added
+- *                                       better error handling
+- * 98-09-25              Daniel Engström adjusted for Etherboot
+- * 98-09-27              Daniel Engström moved some static strings back to the
+- *                                       main .c file
+- * --------------------------------------------------------------------------*/
+-#ifndef	_SMC9000_H_
+-# define _SMC9000_H_
+-
+-/* I want some simple types */
+-typedef unsigned char			byte;
+-typedef unsigned short			word;
+-typedef unsigned long int		dword;
+-
+-/*---------------------------------------------------------------
+- *
+- * A description of the SMC registers is probably in order here,
+- * although for details, the SMC datasheet is invaluable.
+- *
+- * Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+- * are accessed by writing a number into the BANK_SELECT register
+- * ( I also use a SMC_SELECT_BANK macro for this ).
+- *
+- * The banks are configured so that for most purposes, bank 2 is all
+- * that is needed for simple run time tasks.
+- * ----------------------------------------------------------------------*/
+-
+-/*
+- * Bank Select Register:
+- *
+- *		yyyy yyyy 0000 00xx
+- *		xx		= bank number
+- *		yyyy yyyy	= 0x33, for identification purposes.
+- */
+-#define	BANK_SELECT		14
+-
+-/* BANK 0  */
+-
+-#define	TCR		0	/* transmit control register */
+-#define TCR_ENABLE	0x0001	/* if this is 1, we can transmit */
+-#define TCR_FDUPLX	0x0800	/* receive packets sent out */
+-#define TCR_STP_SQET	0x1000	/* stop transmitting if Signal quality error */
+-#define	TCR_MON_CNS	0x0400	/* monitors the carrier status */
+-#define	TCR_PAD_ENABLE	0x0080	/* pads short packets to 64 bytes */
+-
+-#define	TCR_CLEAR	0	/* do NOTHING */
+-/* the normal settings for the TCR register : */
+-#define	TCR_NORMAL	(TCR_ENABLE | TCR_PAD_ENABLE)
+-
+-
+-#define EPH_STATUS	2
+-#define ES_LINK_OK	0x4000	/* is the link integrity ok ? */
+-
+-#define	RCR		4
+-#define RCR_SOFTRESET	0x8000	/* resets the chip */
+-#define	RCR_STRIP_CRC	0x200	/* strips CRC */
+-#define RCR_ENABLE	0x100	/* IFF this is set, we can receive packets */
+-#define RCR_ALMUL	0x4	/* receive all multicast packets */
+-#define	RCR_PROMISC	0x2	/* enable promiscuous mode */
+-
+-/* the normal settings for the RCR register : */
+-#define	RCR_NORMAL	(RCR_STRIP_CRC | RCR_ENABLE)
+-#define RCR_CLEAR	0x0		/* set it to a base state */
+-
+-#define	COUNTER		6
+-#define	MIR		8
+-#define	MCR		10
+-/* 12 is reserved */
+-
+-/* BANK 1 */
+-#define CONFIG			0
+-#define CFG_AUI_SELECT		0x100
+-#define	BASE			2
+-#define	ADDR0			4
+-#define	ADDR1			6
+-#define	ADDR2			8
+-#define	GENERAL			10
+-#define	CONTROL			12
+-#define	CTL_POWERDOWN		0x2000
+-#define	CTL_LE_ENABLE		0x80
+-#define	CTL_CR_ENABLE		0x40
+-#define	CTL_TE_ENABLE		0x0020
+-#define CTL_AUTO_RELEASE	0x0800
+-#define	CTL_EPROM_ACCESS	0x0003 /* high if Eprom is being read */
+-
+-/* BANK 2 */
+-#define MMU_CMD		0
+-#define MC_BUSY		1	/* only readable bit in the register */
+-#define MC_NOP		0
+-#define	MC_ALLOC	0x20	/* or with number of 256 byte packets */
+-#define	MC_RESET	0x40
+-#define	MC_REMOVE	0x60	/* remove the current rx packet */
+-#define MC_RELEASE	0x80	/* remove and release the current rx packet */
+-#define MC_FREEPKT	0xA0	/* Release packet in PNR register */
+-#define MC_ENQUEUE	0xC0	/* Enqueue the packet for transmit */
+-
+-#define	PNR_ARR		2
+-#define FIFO_PORTS	4
+-
+-#define FP_RXEMPTY	0x8000
+-#define FP_TXEMPTY	0x80
+-
+-#define	POINTER		6
+-#define PTR_READ	0x2000
+-#define	PTR_RCV		0x8000
+-#define	PTR_AUTOINC	0x4000
+-#define PTR_AUTO_INC	0x0040
+-
+-#define	DATA_1		8
+-#define	DATA_2		10
+-#define	INTERRUPT	12
+-
+-#define INT_MASK	13
+-#define IM_RCV_INT	0x1
+-#define	IM_TX_INT	0x2
+-#define	IM_TX_EMPTY_INT	0x4
+-#define	IM_ALLOC_INT	0x8
+-#define	IM_RX_OVRN_INT	0x10
+-#define	IM_EPH_INT	0x20
+-#define	IM_ERCV_INT	0x40 /* not on SMC9192 */
+-
+-/* BANK 3 */
+-#define	MULTICAST1	0
+-#define	MULTICAST2	2
+-#define	MULTICAST3	4
+-#define	MULTICAST4	6
+-#define	MGMT		8
+-#define	REVISION	10 /* ( hi: chip id   low: rev # ) */
+-
+-
+-/* this is NOT on SMC9192 */
+-#define	ERCV		12
+-
+-/* Note that 9194 and 9196 have the smame chip id,
+- * the 9196 will have revisions starting at 6 */
+-#define CHIP_9190	3
+-#define CHIP_9194	4
+-#define CHIP_9195	5
+-#define CHIP_9196	4
+-#define CHIP_91100	7
+-#define CHIP_91100FD	8
+-
+-#define REV_9196	6
+-
+-/*
+- * Transmit status bits
+- */
+-#define TS_SUCCESS	0x0001
+-#define TS_LOSTCAR	0x0400
+-#define TS_LATCOL	0x0200
+-#define TS_16COL	0x0010
+-
+-/*
+- * Receive status bits
+- */
+-#define RS_ALGNERR	0x8000
+-#define RS_BADCRC	0x2000
+-#define RS_ODDFRAME	0x1000
+-#define RS_TOOLONG	0x0800
+-#define RS_TOOSHORT	0x0400
+-#define RS_MULTICAST	0x0001
+-#define RS_ERRORS	(RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+-
+-
+-/*-------------------------------------------------------------------------
+- *  I define some macros to make it easier to do somewhat common
+- * or slightly complicated, repeated tasks.
+- --------------------------------------------------------------------------*/
+-
+-/* select a register bank, 0 to 3  */
+-
+-#define SMC_SELECT_BANK(x, y) { _outw( y, x + BANK_SELECT ); }
+-
+-/* define a small delay for the reset */
+-#define SMC_DELAY(x) { inw( x + RCR );\
+-			inw( x + RCR );\
+-			inw( x + RCR ); }
+-
+-
+-#endif	/* _SMC_9000_H_ */
+-
+diff -Naur grub-0.97.orig/netboot/stdint.h grub-0.97/netboot/stdint.h
+--- grub-0.97.orig/netboot/stdint.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/stdint.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,18 @@
++#ifndef STDINT_H
++#define STDINT_H
++/* 
++ * I'm architecture depended. Check me before port GRUB
++ */
++typedef unsigned           size_t;
++
++typedef unsigned char      uint8_t;
++typedef unsigned short     uint16_t;
++typedef unsigned long      uint32_t;
++typedef unsigned long long uint64_t;
++
++typedef signed char        int8_t;
++typedef signed short       int16_t;
++typedef signed long        int32_t;
++typedef signed long long   int64_t;
++
++#endif /* STDINT_H */
+diff -Naur grub-0.97.orig/netboot/tftp.h grub-0.97/netboot/tftp.h
+--- grub-0.97.orig/netboot/tftp.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/tftp.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,82 @@
++#ifndef	_TFTP_H
++#define	_TFTP_H
++
++#include "if_ether.h"
++#include "ip.h"
++#include "udp.h"
++
++#ifndef	MAX_TFTP_RETRIES
++#define MAX_TFTP_RETRIES	20
++#endif
++
++/* These settings have sense only if compiled with -DCONGESTED */
++/* total retransmission timeout in ticks */
++#define TFTP_TIMEOUT		(30*TICKS_PER_SEC)
++/* packet retransmission timeout in ticks */
++#define TFTP_REXMT		(3*TICKS_PER_SEC)
++
++#define TFTP_PORT	69
++#define	TFTP_DEFAULTSIZE_PACKET	512
++#define	TFTP_MAX_PACKET		1432 /* 512 */
++
++#define TFTP_RRQ	1
++#define TFTP_WRQ	2
++#define TFTP_DATA	3
++#define TFTP_ACK	4
++#define TFTP_ERROR	5
++#define TFTP_OACK	6
++
++#define TFTP_CODE_EOF	1
++#define TFTP_CODE_MORE	2
++#define TFTP_CODE_ERROR	3
++#define TFTP_CODE_BOOT	4
++#define TFTP_CODE_CFG	5
++
++struct tftp_t {
++	struct iphdr ip;
++	struct udphdr udp;
++	uint16_t opcode;
++	union {
++		uint8_t rrq[TFTP_DEFAULTSIZE_PACKET];
++		struct {
++			uint16_t block;
++			uint8_t  download[TFTP_MAX_PACKET];
++		} data;
++		struct {
++			uint16_t block;
++		} ack;
++		struct {
++			uint16_t errcode;
++			uint8_t  errmsg[TFTP_DEFAULTSIZE_PACKET];
++		} err;
++		struct {
++			uint8_t  data[TFTP_DEFAULTSIZE_PACKET+2];
++		} oack;
++	} u;
++};
++
++/* define a smaller tftp packet solely for making requests to conserve stack
++   512 bytes should be enough */
++struct tftpreq_t {
++	struct iphdr ip;
++	struct udphdr udp;
++	uint16_t opcode;
++	union {
++		uint8_t rrq[512];
++		struct {
++			uint16_t block;
++		} ack;
++		struct {
++			uint16_t errcode;
++			uint8_t  errmsg[512-2];
++		} err;
++	} u;
++};
++
++#define TFTP_MIN_PACKET	(sizeof(struct iphdr) + sizeof(struct udphdr) + 4)
++
++typedef int (*read_actor_t)(unsigned char *, unsigned int, unsigned int, int);
++
++int tftp_file_read(const char *name, read_actor_t);
++
++#endif	/* _TFTP_H */
+diff -Naur grub-0.97.orig/netboot/tg3.c grub-0.97/netboot/tg3.c
+--- grub-0.97.orig/netboot/tg3.c	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/tg3.c	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,3322 @@
++/* $Id: grub-0.95-diskless-patch-2.patch,v 1.1.1.1 2005/06/14 08:18:50 wesolows Exp $
++ * tg3.c: Broadcom Tigon3 ethernet driver.
++ *
++ * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)
++ * Copyright (C) 2001, 2002 Jeff Garzik (jgarzik@mandrakesoft.com)
++ * Copyright (C) 2003 Eric Biederman (ebiederman@lnxi.com)  [etherboot port]
++ */
++
++/* 11-13-2003	timlegge	Fix Issue with NetGear GA302T 
++ * 11-18-2003   ebiederm        Generalize NetGear Fix to what the code was supposed to be.
++ */
++
++#include "etherboot.h"
++#include "nic.h"
++#include "pci.h"
++#include "timer.h"
++/*#include "string.h"*/
++#include "tg3.h"
++
++#define SUPPORT_COPPER_PHY  1
++#define SUPPORT_FIBER_PHY   1
++#define SUPPORT_LINK_REPORT 1
++#define SUPPORT_PARTNO_STR  1
++#define SUPPORT_PHY_STR     1
++
++struct tg3 tg3;
++
++/* Dummy defines for error handling */
++#define EBUSY  1
++#define ENODEV 2
++#define EINVAL 3
++#define ENOMEM 4
++
++
++/* These numbers seem to be hard coded in the NIC firmware somehow.
++ * You can't change the ring sizes, but you can change where you place
++ * them in the NIC onboard memory.
++ */
++#define TG3_RX_RING_SIZE		512
++#define TG3_DEF_RX_RING_PENDING		20	/* RX_RING_PENDING seems to be o.k. at 20 and 200 */
++#define TG3_RX_RCB_RING_SIZE	1024
++
++/*	(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ? \
++	 512 : 1024) */
++ #define TG3_TX_RING_SIZE		512
++#define TG3_DEF_TX_RING_PENDING		(TG3_TX_RING_SIZE - 1)
++
++#define TG3_RX_RING_BYTES	(sizeof(struct tg3_rx_buffer_desc) * TG3_RX_RING_SIZE)
++#define TG3_RX_RCB_RING_BYTES	(sizeof(struct tg3_rx_buffer_desc) * TG3_RX_RCB_RING_SIZE)
++
++#define TG3_TX_RING_BYTES	(sizeof(struct tg3_tx_buffer_desc) * TG3_TX_RING_SIZE)
++#define NEXT_TX(N)		(((N) + 1) & (TG3_TX_RING_SIZE - 1))
++#define PREV_TX(N)		(((N) - 1) & (TG3_TX_RING_SIZE - 1))
++
++#define RX_PKT_BUF_SZ		(1536 + 2 + 64)
++
++
++static struct bss {
++	struct tg3_rx_buffer_desc rx_std[TG3_RX_RING_SIZE];
++	struct tg3_rx_buffer_desc rx_rcb[TG3_RX_RCB_RING_SIZE];
++	struct tg3_tx_buffer_desc tx_ring[TG3_TX_RING_SIZE];
++	struct tg3_hw_status      hw_status;
++	struct tg3_hw_stats       hw_stats;
++	unsigned char             rx_bufs[TG3_DEF_RX_RING_PENDING][RX_PKT_BUF_SZ];
++} tg3_bss;
++
++/**
++ * pci_save_state - save the PCI configuration space of a device before suspending
++ * @dev: - PCI device that we're dealing with
++ * @buffer: - buffer to hold config space context
++ *
++ * @buffer must be large enough to hold the entire PCI 2.2 config space 
++ * (>= 64 bytes).
++ */
++static int pci_save_state(struct pci_device *dev, uint32_t *buffer)
++{
++	int i;
++	for (i = 0; i < 16; i++)
++		pci_read_config_dword(dev, i * 4,&buffer[i]);
++	return 0;
++}
++
++/** 
++ * pci_restore_state - Restore the saved state of a PCI device
++ * @dev: - PCI device that we're dealing with
++ * @buffer: - saved PCI config space
++ *
++ */
++static int pci_restore_state(struct pci_device *dev, uint32_t *buffer)
++{
++	int i;
++
++	for (i = 0; i < 16; i++)
++		pci_write_config_dword(dev,i * 4, buffer[i]);
++	return 0;
++}
++
++static void tg3_write_indirect_reg32(uint32_t off, uint32_t val)
++{
++	pci_write_config_dword(tg3.pdev, TG3PCI_REG_BASE_ADDR, off);
++	pci_write_config_dword(tg3.pdev, TG3PCI_REG_DATA, val);
++}
++
++#define tw32(reg,val)		tg3_write_indirect_reg32((reg),(val))
++#define tw32_mailbox(reg, val)	writel(((val) & 0xffffffff), tg3.regs + (reg))
++#define tw16(reg,val)		writew(((val) & 0xffff), tg3.regs + (reg))
++#define tw8(reg,val)		writeb(((val) & 0xff), tg3.regs + (reg))
++#define tr32(reg)		readl(tg3.regs + (reg))
++#define tr16(reg)		readw(tg3.regs + (reg))
++#define tr8(reg)		readb(tg3.regs + (reg))
++
++static void tw32_carefully(uint32_t reg, uint32_t val)
++{
++	tw32(reg, val);
++	tr32(reg);
++	udelay(100);
++}
++
++static void tw32_mailbox2(uint32_t reg, uint32_t val)
++{
++	tw32_mailbox(reg, val);
++	tr32(reg);
++}
++
++static void tg3_write_mem(uint32_t off, uint32_t val)
++{
++	pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
++	pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_DATA, val);
++
++	/* Always leave this as zero. */
++	pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
++}
++
++static void tg3_read_mem(uint32_t off, uint32_t *val)
++{
++	pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
++	pci_read_config_dword(tg3.pdev, TG3PCI_MEM_WIN_DATA, val);
++
++	/* Always leave this as zero. */
++	pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
++}
++
++static void tg3_disable_ints(struct tg3 *tp)
++{
++	tw32(TG3PCI_MISC_HOST_CTRL,
++	     (tp->misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT));
++	tw32_mailbox2(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
++}
++
++static void tg3_switch_clocks(struct tg3 *tp)
++{
++	uint32_t orig_clock_ctrl, clock_ctrl;
++
++	clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
++
++	orig_clock_ctrl = clock_ctrl;
++	clock_ctrl &= (CLOCK_CTRL_FORCE_CLKRUN | CLOCK_CTRL_CLKRUN_OENABLE | 0x1f);
++	tp->pci_clock_ctrl = clock_ctrl;
++	
++	if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) &&
++		(orig_clock_ctrl & CLOCK_CTRL_44MHZ_CORE)!=0) {
++		tw32_carefully(TG3PCI_CLOCK_CTRL, 
++			clock_ctrl | (CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK));
++		tw32_carefully(TG3PCI_CLOCK_CTRL, 
++			clock_ctrl | (CLOCK_CTRL_ALTCLK));
++	}
++	tw32_carefully(TG3PCI_CLOCK_CTRL, clock_ctrl);
++}
++
++#define PHY_BUSY_LOOPS	5000
++
++static int tg3_readphy(struct tg3 *tp, int reg, uint32_t *val)
++{
++	uint32_t frame_val;
++	int loops, ret;
++
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL);
++
++	*val = 0xffffffff;
++
++	frame_val  = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
++		      MI_COM_PHY_ADDR_MASK);
++	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
++		      MI_COM_REG_ADDR_MASK);
++	frame_val |= (MI_COM_CMD_READ | MI_COM_START);
++	
++	tw32_carefully(MAC_MI_COM, frame_val);
++
++	loops = PHY_BUSY_LOOPS;
++	while (loops-- > 0) {
++		udelay(10);
++		frame_val = tr32(MAC_MI_COM);
++
++		if ((frame_val & MI_COM_BUSY) == 0) {
++			udelay(5);
++			frame_val = tr32(MAC_MI_COM);
++			break;
++		}
++	}
++
++	ret = -EBUSY;
++	if (loops > 0) {
++		*val = frame_val & MI_COM_DATA_MASK;
++		ret = 0;
++	}
++
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode);
++
++	return ret;
++}
++
++static int tg3_writephy(struct tg3 *tp, int reg, uint32_t val)
++{
++	uint32_t frame_val;
++	int loops, ret;
++
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL);
++
++	frame_val  = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
++		      MI_COM_PHY_ADDR_MASK);
++	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
++		      MI_COM_REG_ADDR_MASK);
++	frame_val |= (val & MI_COM_DATA_MASK);
++	frame_val |= (MI_COM_CMD_WRITE | MI_COM_START);
++	
++	tw32_carefully(MAC_MI_COM, frame_val);
++
++	loops = PHY_BUSY_LOOPS;
++	while (loops-- > 0) {
++		udelay(10);
++		frame_val = tr32(MAC_MI_COM);
++		if ((frame_val & MI_COM_BUSY) == 0) {
++			udelay(5);
++			frame_val = tr32(MAC_MI_COM);
++			break;
++		}
++	}
++
++	ret = -EBUSY;
++	if (loops > 0)
++		ret = 0;
++
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode);
++
++	return ret;
++}
++
++static int tg3_writedsp(struct tg3 *tp, uint16_t addr, uint16_t val)
++{
++	int err;
++	err  = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, addr);
++	err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
++	return err;
++}
++
++
++static void tg3_phy_set_wirespeed(struct tg3 *tp)
++{
++	uint32_t val;
++
++	if (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED)
++		return;
++
++	tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007);
++	tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
++	tg3_writephy(tp, MII_TG3_AUX_CTRL, (val | (1 << 15) | (1 << 4)));
++}
++
++static int tg3_bmcr_reset(struct tg3 *tp)
++{
++	uint32_t phy_control;
++	int limit, err;
++
++	/* OK, reset it, and poll the BMCR_RESET bit until it
++	 * clears or we time out.
++	 */
++	phy_control = BMCR_RESET;
++	err = tg3_writephy(tp, MII_BMCR, phy_control);
++	if (err != 0)
++		return -EBUSY;
++
++	limit = 5000;
++	while (limit--) {
++		err = tg3_readphy(tp, MII_BMCR, &phy_control);
++		if (err != 0)
++			return -EBUSY;
++
++		if ((phy_control & BMCR_RESET) == 0) {
++			udelay(40);
++			break;
++		}
++		udelay(10);
++	}
++	if (limit <= 0)
++		return -EBUSY;
++
++	return 0;
++}
++
++static int tg3_wait_macro_done(struct tg3 *tp)
++{
++	int limit = 100;
++
++	while (limit--) {
++		uint32_t tmp32;
++
++		tg3_readphy(tp, 0x16, &tmp32);
++		if ((tmp32 & 0x1000) == 0)
++			break;
++	}
++	if (limit <= 0)
++		return -EBUSY;
++
++	return 0;
++}
++
++static int tg3_phy_write_and_check_testpat(struct tg3 *tp, int *resetp)
++{
++	static const uint32_t test_pat[4][6] = {
++	{ 0x00005555, 0x00000005, 0x00002aaa, 0x0000000a, 0x00003456, 0x00000003 },
++	{ 0x00002aaa, 0x0000000a, 0x00003333, 0x00000003, 0x0000789a, 0x00000005 },
++	{ 0x00005a5a, 0x00000005, 0x00002a6a, 0x0000000a, 0x00001bcd, 0x00000003 },
++	{ 0x00002a5a, 0x0000000a, 0x000033c3, 0x00000003, 0x00002ef1, 0x00000005 }
++	};
++	int chan;
++
++	for (chan = 0; chan < 4; chan++) {
++		int i;
++
++		tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
++			(chan * 0x2000) | 0x0200);
++		tg3_writephy(tp, 0x16, 0x0002);
++
++		for (i = 0; i < 6; i++)
++			tg3_writephy(tp, MII_TG3_DSP_RW_PORT,
++				test_pat[chan][i]);
++
++		tg3_writephy(tp, 0x16, 0x0202);
++		if (tg3_wait_macro_done(tp)) {
++			*resetp = 1;
++			return -EBUSY;
++		}
++
++		tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
++			     (chan * 0x2000) | 0x0200);
++		tg3_writephy(tp, 0x16, 0x0082);
++		if (tg3_wait_macro_done(tp)) {
++			*resetp = 1;
++			return -EBUSY;
++		}
++
++		tg3_writephy(tp, 0x16, 0x0802);
++		if (tg3_wait_macro_done(tp)) {
++			*resetp = 1;
++			return -EBUSY;
++		}
++
++		for (i = 0; i < 6; i += 2) {
++			uint32_t low, high;
++
++			tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &low);
++			tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &high);
++			if (tg3_wait_macro_done(tp)) {
++				*resetp = 1;
++				return -EBUSY;
++			}
++			low &= 0x7fff;
++			high &= 0x000f;
++			if (low != test_pat[chan][i] ||
++			    high != test_pat[chan][i+1]) {
++				tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000b);
++				tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x4001);
++				tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x4005);
++
++				return -EBUSY;
++			}
++		}
++	}
++
++	return 0;
++}
++
++static int tg3_phy_reset_chanpat(struct tg3 *tp)
++{
++	int chan;
++
++	for (chan = 0; chan < 4; chan++) {
++		int i;
++
++		tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
++			     (chan * 0x2000) | 0x0200);
++		tg3_writephy(tp, 0x16, 0x0002);
++		for (i = 0; i < 6; i++)
++			tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x000);
++		tg3_writephy(tp, 0x16, 0x0202);
++		if (tg3_wait_macro_done(tp))
++			return -EBUSY;
++	}
++
++	return 0;
++}
++
++static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
++{
++	uint32_t reg32, phy9_orig;
++	int retries, do_phy_reset, err;
++
++	retries = 10;
++	do_phy_reset = 1;
++	do {
++		if (do_phy_reset) {
++			err = tg3_bmcr_reset(tp);
++			if (err)
++				return err;
++			do_phy_reset = 0;
++		}
++		
++		/* Disable transmitter and interrupt.  */
++		tg3_readphy(tp, MII_TG3_EXT_CTRL, &reg32);
++		reg32 |= 0x3000;
++		tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
++
++		/* Set full-duplex, 1000 mbps.  */
++		tg3_writephy(tp, MII_BMCR,
++			BMCR_FULLDPLX | TG3_BMCR_SPEED1000);
++
++		/* Set to master mode.  */
++		tg3_readphy(tp, MII_TG3_CTRL, &phy9_orig);
++		tg3_writephy(tp, MII_TG3_CTRL,
++			(MII_TG3_CTRL_AS_MASTER |
++				MII_TG3_CTRL_ENABLE_AS_MASTER));
++
++		/* Enable SM_DSP_CLOCK and 6dB.  */
++		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
++
++		/* Block the PHY control access.  */
++		tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8005);
++		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0800);
++
++		err = tg3_phy_write_and_check_testpat(tp, &do_phy_reset);
++		if (!err)
++			break;
++	} while (--retries);
++
++	err = tg3_phy_reset_chanpat(tp);
++	if (err)
++		return err;
++
++	tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8005);
++	tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0000);
++
++	tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200);
++	tg3_writephy(tp, 0x16, 0x0000);
++
++	tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
++
++	tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
++
++	tg3_readphy(tp, MII_TG3_EXT_CTRL, &reg32);
++	reg32 &= ~0x3000;
++	tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
++
++	return err;
++}
++
++/* This will reset the tigon3 PHY if there is no valid
++ * link.
++ */
++static int tg3_phy_reset(struct tg3 *tp)
++{
++	uint32_t phy_status;
++	int err;
++
++	err  = tg3_readphy(tp, MII_BMSR, &phy_status);
++	err |= tg3_readphy(tp, MII_BMSR, &phy_status);
++	if (err != 0)
++		return -EBUSY;
++
++	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
++		(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
++		(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
++		err = tg3_phy_reset_5703_4_5(tp);
++		if (err)
++			return err;
++		goto out;
++	}
++	err = tg3_bmcr_reset(tp);
++	if (err)
++		return err;
++ out:
++	tg3_phy_set_wirespeed(tp);
++	return 0;
++}
++
++static void tg3_set_power_state_0(struct tg3 *tp)
++{
++	uint16_t power_control;
++	int pm = tp->pm_cap;
++
++	/* Make sure register accesses (indirect or otherwise)
++	 * will function correctly.
++	 */
++	pci_write_config_dword(tp->pdev,  TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl);
++
++	pci_read_config_word(tp->pdev, pm + PCI_PM_CTRL, &power_control);
++
++	power_control |= PCI_PM_CTRL_PME_STATUS;
++	power_control &= ~(PCI_PM_CTRL_STATE_MASK);
++	power_control |= 0;
++	pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
++
++	tw32_carefully(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
++
++	return;
++}
++
++
++#if SUPPORT_LINK_REPORT
++static void tg3_link_report(struct tg3 *tp)
++{
++	if (!tp->carrier_ok) {
++		printf("Link is down.\n");
++	} else {
++		printf("Link is up at %d Mbps, %s duplex. %s %s %s\n",
++			(tp->link_config.active_speed == SPEED_1000 ?
++			       1000 :
++			(tp->link_config.active_speed == SPEED_100 ?
++				100 : 10)),
++			(tp->link_config.active_duplex == DUPLEX_FULL ?  
++				"full" : "half"),
++			(tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "TX" : "",
++			(tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "RX" : "",
++			(tp->tg3_flags & (TG3_FLAG_TX_PAUSE |TG3_FLAG_RX_PAUSE)) ? "flow control" : "");
++	}
++}
++#else
++#define tg3_link_report(tp)
++#endif
++
++static void tg3_setup_flow_control(struct tg3 *tp, uint32_t local_adv, uint32_t remote_adv)
++{
++	uint32_t new_tg3_flags = 0;
++
++	if (local_adv & ADVERTISE_PAUSE_CAP) {
++		if (local_adv & ADVERTISE_PAUSE_ASYM) {
++			if (remote_adv & LPA_PAUSE_CAP)
++				new_tg3_flags |=
++					(TG3_FLAG_RX_PAUSE |
++					 TG3_FLAG_TX_PAUSE);
++			else if (remote_adv & LPA_PAUSE_ASYM)
++				new_tg3_flags |=
++					(TG3_FLAG_RX_PAUSE);
++		} else {
++			if (remote_adv & LPA_PAUSE_CAP)
++				new_tg3_flags |=
++					(TG3_FLAG_RX_PAUSE |
++					 TG3_FLAG_TX_PAUSE);
++		}
++	} else if (local_adv & ADVERTISE_PAUSE_ASYM) {
++		if ((remote_adv & LPA_PAUSE_CAP) &&
++		    (remote_adv & LPA_PAUSE_ASYM))
++			new_tg3_flags |= TG3_FLAG_TX_PAUSE;
++	}
++
++	tp->tg3_flags &= ~(TG3_FLAG_RX_PAUSE | TG3_FLAG_TX_PAUSE);
++	tp->tg3_flags |= new_tg3_flags;
++
++	if (new_tg3_flags & TG3_FLAG_RX_PAUSE)
++		tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
++	else
++		tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
++
++	if (new_tg3_flags & TG3_FLAG_TX_PAUSE)
++		tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
++	else
++		tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
++}
++
++#if SUPPORT_COPPER_PHY
++static void tg3_aux_stat_to_speed_duplex(
++	struct tg3 *tp __unused, uint32_t val, uint8_t *speed, uint8_t *duplex)
++{
++	static const uint8_t map[] = {
++		[0] = (SPEED_INVALID << 2) | DUPLEX_INVALID,
++		[MII_TG3_AUX_STAT_10HALF >> 8]   = (SPEED_10 << 2) | DUPLEX_HALF,
++		[MII_TG3_AUX_STAT_10FULL >> 8]   = (SPEED_10 << 2) | DUPLEX_FULL,
++		[MII_TG3_AUX_STAT_100HALF >> 8]  = (SPEED_100 << 2) | DUPLEX_HALF,
++		[MII_TG3_AUX_STAT_100_4 >> 8] = (SPEED_INVALID << 2) | DUPLEX_INVALID,
++		[MII_TG3_AUX_STAT_100FULL >> 8]  = (SPEED_100 << 2) | DUPLEX_FULL,
++		[MII_TG3_AUX_STAT_1000HALF >> 8] = (SPEED_1000 << 2) | DUPLEX_HALF,
++		[MII_TG3_AUX_STAT_1000FULL >> 8] = (SPEED_1000 << 2) | DUPLEX_FULL,
++	};
++	uint8_t result;
++	result = map[(val & MII_TG3_AUX_STAT_SPDMASK) >> 8];
++	*speed = result >> 2;
++	*duplex = result & 3;
++}
++
++static int tg3_phy_copper_begin(struct tg3 *tp)
++{
++	uint32_t new_adv;
++
++	tp->link_config.advertising =
++		(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
++			ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
++			ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full |
++			ADVERTISED_Autoneg | ADVERTISED_MII);
++	
++	if (tp->tg3_flags & TG3_FLAG_10_100_ONLY) {
++		tp->link_config.advertising &=
++			~(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full);
++	}
++	
++	new_adv = (ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
++	if (tp->link_config.advertising & ADVERTISED_10baseT_Half) {
++		new_adv |= ADVERTISE_10HALF;
++	}
++	if (tp->link_config.advertising & ADVERTISED_10baseT_Full) {
++		new_adv |= ADVERTISE_10FULL;
++	}
++	if (tp->link_config.advertising & ADVERTISED_100baseT_Half) {
++		new_adv |= ADVERTISE_100HALF;
++	}
++	if (tp->link_config.advertising & ADVERTISED_100baseT_Full) {
++		new_adv |= ADVERTISE_100FULL;
++	}
++	tg3_writephy(tp, MII_ADVERTISE, new_adv);
++	
++	if (tp->link_config.advertising &
++		(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
++		new_adv = 0;
++		if (tp->link_config.advertising & ADVERTISED_1000baseT_Half) {
++			new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
++		}
++		if (tp->link_config.advertising & ADVERTISED_1000baseT_Full) {
++			new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
++		}
++		if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY) &&
++			(tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
++				tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)) {
++			new_adv |= (MII_TG3_CTRL_AS_MASTER |
++				MII_TG3_CTRL_ENABLE_AS_MASTER);
++		}
++		tg3_writephy(tp, MII_TG3_CTRL, new_adv);
++	} else {
++		tg3_writephy(tp, MII_TG3_CTRL, 0);
++	}
++
++	tg3_writephy(tp, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
++
++	return 0;
++}
++
++static int tg3_init_5401phy_dsp(struct tg3 *tp)
++{
++	int err;
++
++	/* Turn off tap power management. */
++	err  = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c20);
++	
++	err |= tg3_writedsp(tp, 0x0012, 0x1804);
++	err |= tg3_writedsp(tp, 0x0013, 0x1204);
++	err |= tg3_writedsp(tp, 0x8006, 0x0132);
++	err |= tg3_writedsp(tp, 0x8006, 0x0232);
++	err |= tg3_writedsp(tp, 0x201f, 0x0a20);
++
++	udelay(40);
++
++	return err;
++}
++
++static int tg3_setup_copper_phy(struct tg3 *tp)
++{
++	int current_link_up;
++	uint32_t bmsr, dummy;
++	int i, err;
++
++	tw32_carefully(MAC_STATUS,
++		(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
++
++	tp->mi_mode = MAC_MI_MODE_BASE;
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode);
++
++	tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x02);
++
++	/* Some third-party PHYs need to be reset on link going
++	 * down.
++	 */
++	if (	(	(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
++			(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
++			(tp->pci_chip_rev_id == CHIPREV_ID_5705_A0)) &&
++		(tp->carrier_ok)) {
++		tg3_readphy(tp, MII_BMSR, &bmsr);
++		tg3_readphy(tp, MII_BMSR, &bmsr);
++		if (!(bmsr & BMSR_LSTATUS))
++			tg3_phy_reset(tp);
++	}
++
++	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
++		tg3_readphy(tp, MII_BMSR, &bmsr);
++		tg3_readphy(tp, MII_BMSR, &bmsr);
++
++		if (!(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
++			bmsr = 0;
++
++		if (!(bmsr & BMSR_LSTATUS)) {
++			err = tg3_init_5401phy_dsp(tp);
++			if (err)
++				return err;
++
++			tg3_readphy(tp, MII_BMSR, &bmsr);
++			for (i = 0; i < 1000; i++) {
++				udelay(10);
++				tg3_readphy(tp, MII_BMSR, &bmsr);
++				if (bmsr & BMSR_LSTATUS) {
++					udelay(40);
++					break;
++				}
++			}
++
++			if ((tp->phy_id & PHY_ID_REV_MASK) == PHY_REV_BCM5401_B0 &&
++			    !(bmsr & BMSR_LSTATUS) &&
++			    tp->link_config.active_speed == SPEED_1000) {
++				err = tg3_phy_reset(tp);
++				if (!err)
++					err = tg3_init_5401phy_dsp(tp);
++				if (err)
++					return err;
++			}
++		}
++	} else if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
++		   tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) {
++		/* 5701 {A0,B0} CRC bug workaround */
++		tg3_writephy(tp, 0x15, 0x0a75);
++		tg3_writephy(tp, 0x1c, 0x8c68);
++		tg3_writephy(tp, 0x1c, 0x8d68);
++		tg3_writephy(tp, 0x1c, 0x8c68);
++	}
++
++	/* Clear pending interrupts... */
++	tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
++	tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
++
++	tg3_writephy(tp, MII_TG3_IMASK, ~0);
++
++	if (tp->led_mode == led_mode_three_link)
++		tg3_writephy(tp, MII_TG3_EXT_CTRL,
++			     MII_TG3_EXT_CTRL_LNK3_LED_MODE);
++	else
++		tg3_writephy(tp, MII_TG3_EXT_CTRL, 0);
++
++	current_link_up = 0;
++
++	tg3_readphy(tp, MII_BMSR, &bmsr);
++	tg3_readphy(tp, MII_BMSR, &bmsr);
++
++	if (bmsr & BMSR_LSTATUS) {
++		uint32_t aux_stat, bmcr;
++
++		tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
++		for (i = 0; i < 2000; i++) {
++			udelay(10);
++			tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
++			if (aux_stat)
++				break;
++		}
++
++		tg3_aux_stat_to_speed_duplex(tp, aux_stat,
++			&tp->link_config.active_speed,
++			&tp->link_config.active_duplex);
++		tg3_readphy(tp, MII_BMCR, &bmcr);
++		tg3_readphy(tp, MII_BMCR, &bmcr);
++		if (bmcr & BMCR_ANENABLE) {
++			uint32_t gig_ctrl;
++			
++			current_link_up = 1;
++			
++			/* Force autoneg restart if we are exiting
++			 * low power mode.
++			 */
++			tg3_readphy(tp, MII_TG3_CTRL, &gig_ctrl);
++			if (!(gig_ctrl & (MII_TG3_CTRL_ADV_1000_HALF |
++				      MII_TG3_CTRL_ADV_1000_FULL))) {
++				current_link_up = 0;
++			}
++		} else {
++			current_link_up = 0;
++		}
++	}
++
++	if (current_link_up == 1 &&
++		(tp->link_config.active_duplex == DUPLEX_FULL)) {
++		uint32_t local_adv, remote_adv;
++
++		tg3_readphy(tp, MII_ADVERTISE, &local_adv);
++		local_adv &= (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
++
++		tg3_readphy(tp, MII_LPA, &remote_adv);
++		remote_adv &= (LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
++
++		/* If we are not advertising full pause capability,
++		 * something is wrong.  Bring the link down and reconfigure.
++		 */
++		if (local_adv != ADVERTISE_PAUSE_CAP) {
++			current_link_up = 0;
++		} else {
++			tg3_setup_flow_control(tp, local_adv, remote_adv);
++		}
++	}
++
++	if (current_link_up == 0) {
++		uint32_t tmp;
++
++		tg3_phy_copper_begin(tp);
++
++		tg3_readphy(tp, MII_BMSR, &tmp);
++		tg3_readphy(tp, MII_BMSR, &tmp);
++		if (tmp & BMSR_LSTATUS)
++			current_link_up = 1;
++	}
++
++	tp->mac_mode &= ~MAC_MODE_PORT_MODE_MASK;
++	if (current_link_up == 1) {
++		if (tp->link_config.active_speed == SPEED_100 ||
++		    tp->link_config.active_speed == SPEED_10)
++			tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
++		else
++			tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
++	} else
++		tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
++
++	tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
++	if (tp->link_config.active_duplex == DUPLEX_HALF)
++		tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
++
++	tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
++		if ((tp->led_mode == led_mode_link10) ||
++		    (current_link_up == 1 &&
++		     tp->link_config.active_speed == SPEED_10))
++			tp->mac_mode |= MAC_MODE_LINK_POLARITY;
++	} else {
++		if (current_link_up == 1)
++			tp->mac_mode |= MAC_MODE_LINK_POLARITY;
++		tw32(MAC_LED_CTRL, LED_CTRL_PHY_MODE_1);
++	}
++
++	/* ??? Without this setting Netgear GA302T PHY does not
++	 * ??? send/receive packets...
++	 * With this other PHYs cannot bring up the link
++	 */
++	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411 &&
++		tp->pci_chip_rev_id == CHIPREV_ID_5700_ALTIMA) {
++		tp->mi_mode |= MAC_MI_MODE_AUTO_POLL;
++		tw32_carefully(MAC_MI_MODE, tp->mi_mode);
++	}
++
++	tw32_carefully(MAC_MODE, tp->mac_mode);
++
++	/* Link change polled. */
++	tw32_carefully(MAC_EVENT, 0);
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 &&
++	    current_link_up == 1 &&
++	    tp->link_config.active_speed == SPEED_1000 &&
++	    ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ||
++	     (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED))) {
++		udelay(120);
++		tw32_carefully(MAC_STATUS,
++			(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
++		tg3_write_mem(
++			      NIC_SRAM_FIRMWARE_MBOX,
++			      NIC_SRAM_FIRMWARE_MBOX_MAGIC2);
++	}
++
++	if (current_link_up != tp->carrier_ok) {
++		tp->carrier_ok = current_link_up;
++		tg3_link_report(tp);
++	}
++
++	return 0;
++}
++#else
++#define tg3_setup_copper_phy(TP) (-EINVAL)
++#endif /* SUPPORT_COPPER_PHY */
++
++#if SUPPORT_FIBER_PHY
++struct tg3_fiber_aneginfo {
++	int state;
++#define ANEG_STATE_UNKNOWN		0
++#define ANEG_STATE_AN_ENABLE		1
++#define ANEG_STATE_RESTART_INIT		2
++#define ANEG_STATE_RESTART		3
++#define ANEG_STATE_DISABLE_LINK_OK	4
++#define ANEG_STATE_ABILITY_DETECT_INIT	5
++#define ANEG_STATE_ABILITY_DETECT	6
++#define ANEG_STATE_ACK_DETECT_INIT	7
++#define ANEG_STATE_ACK_DETECT		8
++#define ANEG_STATE_COMPLETE_ACK_INIT	9
++#define ANEG_STATE_COMPLETE_ACK		10
++#define ANEG_STATE_IDLE_DETECT_INIT	11
++#define ANEG_STATE_IDLE_DETECT		12
++#define ANEG_STATE_LINK_OK		13
++#define ANEG_STATE_NEXT_PAGE_WAIT_INIT	14
++#define ANEG_STATE_NEXT_PAGE_WAIT	15
++
++	uint32_t flags;
++#define MR_AN_ENABLE		0x00000001
++#define MR_RESTART_AN		0x00000002
++#define MR_AN_COMPLETE		0x00000004
++#define MR_PAGE_RX		0x00000008
++#define MR_NP_LOADED		0x00000010
++#define MR_TOGGLE_TX		0x00000020
++#define MR_LP_ADV_FULL_DUPLEX	0x00000040
++#define MR_LP_ADV_HALF_DUPLEX	0x00000080
++#define MR_LP_ADV_SYM_PAUSE	0x00000100
++#define MR_LP_ADV_ASYM_PAUSE	0x00000200
++#define MR_LP_ADV_REMOTE_FAULT1	0x00000400
++#define MR_LP_ADV_REMOTE_FAULT2	0x00000800
++#define MR_LP_ADV_NEXT_PAGE	0x00001000
++#define MR_TOGGLE_RX		0x00002000
++#define MR_NP_RX		0x00004000
++
++#define MR_LINK_OK		0x80000000
++
++	unsigned long link_time, cur_time;
++
++	uint32_t ability_match_cfg;
++	int ability_match_count;
++
++	char ability_match, idle_match, ack_match;
++
++	uint32_t txconfig, rxconfig;
++#define ANEG_CFG_NP		0x00000080
++#define ANEG_CFG_ACK		0x00000040
++#define ANEG_CFG_RF2		0x00000020
++#define ANEG_CFG_RF1		0x00000010
++#define ANEG_CFG_PS2		0x00000001
++#define ANEG_CFG_PS1		0x00008000
++#define ANEG_CFG_HD		0x00004000
++#define ANEG_CFG_FD		0x00002000
++#define ANEG_CFG_INVAL		0x00001f06
++
++};
++#define ANEG_OK		0
++#define ANEG_DONE	1
++#define ANEG_TIMER_ENAB	2
++#define ANEG_FAILED	-1
++
++#define ANEG_STATE_SETTLE_TIME	10000
++
++static int tg3_fiber_aneg_smachine(struct tg3 *tp,
++				   struct tg3_fiber_aneginfo *ap)
++{
++	unsigned long delta;
++	uint32_t rx_cfg_reg;
++	int ret;
++
++	if (ap->state == ANEG_STATE_UNKNOWN) {
++		ap->rxconfig = 0;
++		ap->link_time = 0;
++		ap->cur_time = 0;
++		ap->ability_match_cfg = 0;
++		ap->ability_match_count = 0;
++		ap->ability_match = 0;
++		ap->idle_match = 0;
++		ap->ack_match = 0;
++	}
++	ap->cur_time++;
++
++	if (tr32(MAC_STATUS) & MAC_STATUS_RCVD_CFG) {
++		rx_cfg_reg = tr32(MAC_RX_AUTO_NEG);
++
++		if (rx_cfg_reg != ap->ability_match_cfg) {
++			ap->ability_match_cfg = rx_cfg_reg;
++			ap->ability_match = 0;
++			ap->ability_match_count = 0;
++		} else {
++			if (++ap->ability_match_count > 1) {
++				ap->ability_match = 1;
++				ap->ability_match_cfg = rx_cfg_reg;
++			}
++		}
++		if (rx_cfg_reg & ANEG_CFG_ACK)
++			ap->ack_match = 1;
++		else
++			ap->ack_match = 0;
++
++		ap->idle_match = 0;
++	} else {
++		ap->idle_match = 1;
++		ap->ability_match_cfg = 0;
++		ap->ability_match_count = 0;
++		ap->ability_match = 0;
++		ap->ack_match = 0;
++
++		rx_cfg_reg = 0;
++	}
++
++	ap->rxconfig = rx_cfg_reg;
++	ret = ANEG_OK;
++
++	switch(ap->state) {
++	case ANEG_STATE_UNKNOWN:
++		if (ap->flags & (MR_AN_ENABLE | MR_RESTART_AN))
++			ap->state = ANEG_STATE_AN_ENABLE;
++
++		/* fallthru */
++	case ANEG_STATE_AN_ENABLE:
++		ap->flags &= ~(MR_AN_COMPLETE | MR_PAGE_RX);
++		if (ap->flags & MR_AN_ENABLE) {
++			ap->link_time = 0;
++			ap->cur_time = 0;
++			ap->ability_match_cfg = 0;
++			ap->ability_match_count = 0;
++			ap->ability_match = 0;
++			ap->idle_match = 0;
++			ap->ack_match = 0;
++
++			ap->state = ANEG_STATE_RESTART_INIT;
++		} else {
++			ap->state = ANEG_STATE_DISABLE_LINK_OK;
++		}
++		break;
++
++	case ANEG_STATE_RESTART_INIT:
++		ap->link_time = ap->cur_time;
++		ap->flags &= ~(MR_NP_LOADED);
++		ap->txconfig = 0;
++		tw32(MAC_TX_AUTO_NEG, 0);
++		tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
++		tw32_carefully(MAC_MODE, tp->mac_mode);
++
++		ret = ANEG_TIMER_ENAB;
++		ap->state = ANEG_STATE_RESTART;
++
++		/* fallthru */
++	case ANEG_STATE_RESTART:
++		delta = ap->cur_time - ap->link_time;
++		if (delta > ANEG_STATE_SETTLE_TIME) {
++			ap->state = ANEG_STATE_ABILITY_DETECT_INIT;
++		} else {
++			ret = ANEG_TIMER_ENAB;
++		}
++		break;
++
++	case ANEG_STATE_DISABLE_LINK_OK:
++		ret = ANEG_DONE;
++		break;
++
++	case ANEG_STATE_ABILITY_DETECT_INIT:
++		ap->flags &= ~(MR_TOGGLE_TX);
++		ap->txconfig = (ANEG_CFG_FD | ANEG_CFG_PS1);
++		tw32(MAC_TX_AUTO_NEG, ap->txconfig);
++		tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
++		tw32_carefully(MAC_MODE, tp->mac_mode);
++
++		ap->state = ANEG_STATE_ABILITY_DETECT;
++		break;
++
++	case ANEG_STATE_ABILITY_DETECT:
++		if (ap->ability_match != 0 && ap->rxconfig != 0) {
++			ap->state = ANEG_STATE_ACK_DETECT_INIT;
++		}
++		break;
++
++	case ANEG_STATE_ACK_DETECT_INIT:
++		ap->txconfig |= ANEG_CFG_ACK;
++		tw32(MAC_TX_AUTO_NEG, ap->txconfig);
++		tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
++		tw32_carefully(MAC_MODE, tp->mac_mode);
++
++		ap->state = ANEG_STATE_ACK_DETECT;
++
++		/* fallthru */
++	case ANEG_STATE_ACK_DETECT:
++		if (ap->ack_match != 0) {
++			if ((ap->rxconfig & ~ANEG_CFG_ACK) ==
++			    (ap->ability_match_cfg & ~ANEG_CFG_ACK)) {
++				ap->state = ANEG_STATE_COMPLETE_ACK_INIT;
++			} else {
++				ap->state = ANEG_STATE_AN_ENABLE;
++			}
++		} else if (ap->ability_match != 0 &&
++			   ap->rxconfig == 0) {
++			ap->state = ANEG_STATE_AN_ENABLE;
++		}
++		break;
++
++	case ANEG_STATE_COMPLETE_ACK_INIT:
++		if (ap->rxconfig & ANEG_CFG_INVAL) {
++			ret = ANEG_FAILED;
++			break;
++		}
++		ap->flags &= ~(MR_LP_ADV_FULL_DUPLEX |
++			       MR_LP_ADV_HALF_DUPLEX |
++			       MR_LP_ADV_SYM_PAUSE |
++			       MR_LP_ADV_ASYM_PAUSE |
++			       MR_LP_ADV_REMOTE_FAULT1 |
++			       MR_LP_ADV_REMOTE_FAULT2 |
++			       MR_LP_ADV_NEXT_PAGE |
++			       MR_TOGGLE_RX |
++			       MR_NP_RX);
++		if (ap->rxconfig & ANEG_CFG_FD)
++			ap->flags |= MR_LP_ADV_FULL_DUPLEX;
++		if (ap->rxconfig & ANEG_CFG_HD)
++			ap->flags |= MR_LP_ADV_HALF_DUPLEX;
++		if (ap->rxconfig & ANEG_CFG_PS1)
++			ap->flags |= MR_LP_ADV_SYM_PAUSE;
++		if (ap->rxconfig & ANEG_CFG_PS2)
++			ap->flags |= MR_LP_ADV_ASYM_PAUSE;
++		if (ap->rxconfig & ANEG_CFG_RF1)
++			ap->flags |= MR_LP_ADV_REMOTE_FAULT1;
++		if (ap->rxconfig & ANEG_CFG_RF2)
++			ap->flags |= MR_LP_ADV_REMOTE_FAULT2;
++		if (ap->rxconfig & ANEG_CFG_NP)
++			ap->flags |= MR_LP_ADV_NEXT_PAGE;
++
++		ap->link_time = ap->cur_time;
++
++		ap->flags ^= (MR_TOGGLE_TX);
++		if (ap->rxconfig & 0x0008)
++			ap->flags |= MR_TOGGLE_RX;
++		if (ap->rxconfig & ANEG_CFG_NP)
++			ap->flags |= MR_NP_RX;
++		ap->flags |= MR_PAGE_RX;
++
++		ap->state = ANEG_STATE_COMPLETE_ACK;
++		ret = ANEG_TIMER_ENAB;
++		break;
++
++	case ANEG_STATE_COMPLETE_ACK:
++		if (ap->ability_match != 0 &&
++		    ap->rxconfig == 0) {
++			ap->state = ANEG_STATE_AN_ENABLE;
++			break;
++		}
++		delta = ap->cur_time - ap->link_time;
++		if (delta > ANEG_STATE_SETTLE_TIME) {
++			if (!(ap->flags & (MR_LP_ADV_NEXT_PAGE))) {
++				ap->state = ANEG_STATE_IDLE_DETECT_INIT;
++			} else {
++				if ((ap->txconfig & ANEG_CFG_NP) == 0 &&
++				    !(ap->flags & MR_NP_RX)) {
++					ap->state = ANEG_STATE_IDLE_DETECT_INIT;
++				} else {
++					ret = ANEG_FAILED;
++				}
++			}
++		}
++		break;
++
++	case ANEG_STATE_IDLE_DETECT_INIT:
++		ap->link_time = ap->cur_time;
++		tp->mac_mode &= ~MAC_MODE_SEND_CONFIGS;
++		tw32_carefully(MAC_MODE, tp->mac_mode);
++
++		ap->state = ANEG_STATE_IDLE_DETECT;
++		ret = ANEG_TIMER_ENAB;
++		break;
++
++	case ANEG_STATE_IDLE_DETECT:
++		if (ap->ability_match != 0 &&
++		    ap->rxconfig == 0) {
++			ap->state = ANEG_STATE_AN_ENABLE;
++			break;
++		}
++		delta = ap->cur_time - ap->link_time;
++		if (delta > ANEG_STATE_SETTLE_TIME) {
++			/* XXX another gem from the Broadcom driver :( */
++			ap->state = ANEG_STATE_LINK_OK;
++		}
++		break;
++
++	case ANEG_STATE_LINK_OK:
++		ap->flags |= (MR_AN_COMPLETE | MR_LINK_OK);
++		ret = ANEG_DONE;
++		break;
++
++	case ANEG_STATE_NEXT_PAGE_WAIT_INIT:
++		/* ??? unimplemented */
++		break;
++
++	case ANEG_STATE_NEXT_PAGE_WAIT:
++		/* ??? unimplemented */
++		break;
++
++	default:
++		ret = ANEG_FAILED;
++		break;
++	};
++
++	return ret;
++}
++
++static int tg3_setup_fiber_phy(struct tg3 *tp)
++{
++	uint32_t orig_pause_cfg;
++	uint16_t orig_active_speed;
++	uint8_t orig_active_duplex;
++	int current_link_up;
++	int i;
++
++	orig_pause_cfg =
++		(tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
++				  TG3_FLAG_TX_PAUSE));
++	orig_active_speed = tp->link_config.active_speed;
++	orig_active_duplex = tp->link_config.active_duplex;
++
++	tp->mac_mode &= ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
++	tp->mac_mode |= MAC_MODE_PORT_MODE_TBI;
++	tw32_carefully(MAC_MODE, tp->mac_mode);
++
++	/* Reset when initting first time or we have a link. */
++	if (!(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) ||
++	    (tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED)) {
++		/* Set PLL lock range. */
++		tg3_writephy(tp, 0x16, 0x8007);
++
++		/* SW reset */
++		tg3_writephy(tp, MII_BMCR, BMCR_RESET);
++
++		/* Wait for reset to complete. */
++		mdelay(5);
++
++		/* Config mode; select PMA/Ch 1 regs. */
++		tg3_writephy(tp, 0x10, 0x8411);
++
++		/* Enable auto-lock and comdet, select txclk for tx. */
++		tg3_writephy(tp, 0x11, 0x0a10);
++
++		tg3_writephy(tp, 0x18, 0x00a0);
++		tg3_writephy(tp, 0x16, 0x41ff);
++
++		/* Assert and deassert POR. */
++		tg3_writephy(tp, 0x13, 0x0400);
++		udelay(40);
++		tg3_writephy(tp, 0x13, 0x0000);
++
++		tg3_writephy(tp, 0x11, 0x0a50);
++		udelay(40);
++		tg3_writephy(tp, 0x11, 0x0a10);
++
++		/* Wait for signal to stabilize */
++		mdelay(150);
++
++		/* Deselect the channel register so we can read the PHYID
++		 * later.
++		 */
++		tg3_writephy(tp, 0x10, 0x8011);
++	}
++
++	/* Disable link change interrupt.  */
++	tw32_carefully(MAC_EVENT, 0);
++
++	current_link_up = 0;
++	if (tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED) {
++		if (!(tp->tg3_flags & TG3_FLAG_GOT_SERDES_FLOWCTL)) {
++			struct tg3_fiber_aneginfo aninfo;
++			int status = ANEG_FAILED;
++			unsigned int tick;
++			uint32_t tmp;
++
++			memset(&aninfo, 0, sizeof(aninfo));
++			aninfo.flags |= (MR_AN_ENABLE);
++
++			tw32(MAC_TX_AUTO_NEG, 0);
++
++			tmp = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
++			tw32_carefully(MAC_MODE, tmp | MAC_MODE_PORT_MODE_GMII);
++
++			tw32_carefully(MAC_MODE, tp->mac_mode | MAC_MODE_SEND_CONFIGS);
++
++			aninfo.state = ANEG_STATE_UNKNOWN;
++			aninfo.cur_time = 0;
++			tick = 0;
++			while (++tick < 195000) {
++				status = tg3_fiber_aneg_smachine(tp, &aninfo);
++				if (status == ANEG_DONE ||
++				    status == ANEG_FAILED)
++					break;
++
++				udelay(1);
++			}
++
++			tp->mac_mode &= ~MAC_MODE_SEND_CONFIGS;
++			tw32_carefully(MAC_MODE, tp->mac_mode);
++
++			if (status == ANEG_DONE &&
++			    (aninfo.flags &
++			     (MR_AN_COMPLETE | MR_LINK_OK |
++			      MR_LP_ADV_FULL_DUPLEX))) {
++				uint32_t local_adv, remote_adv;
++
++				local_adv = ADVERTISE_PAUSE_CAP;
++				remote_adv = 0;
++				if (aninfo.flags & MR_LP_ADV_SYM_PAUSE)
++					remote_adv |= LPA_PAUSE_CAP;
++				if (aninfo.flags & MR_LP_ADV_ASYM_PAUSE)
++					remote_adv |= LPA_PAUSE_ASYM;
++
++				tg3_setup_flow_control(tp, local_adv, remote_adv);
++
++				tp->tg3_flags |=
++					TG3_FLAG_GOT_SERDES_FLOWCTL;
++				current_link_up = 1;
++			}
++			for (i = 0; i < 60; i++) {
++				udelay(20);
++				tw32_carefully(MAC_STATUS,
++					(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
++				if ((tr32(MAC_STATUS) &
++				     (MAC_STATUS_SYNC_CHANGED |
++				      MAC_STATUS_CFG_CHANGED)) == 0)
++					break;
++			}
++			if (current_link_up == 0 &&
++			    (tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED)) {
++				current_link_up = 1;
++			}
++		} else {
++			/* Forcing 1000FD link up. */
++			current_link_up = 1;
++		}
++	}
++
++	tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
++	tw32_carefully(MAC_MODE, tp->mac_mode);
++
++	tp->hw_status->status =
++		(SD_STATUS_UPDATED |
++		 (tp->hw_status->status & ~SD_STATUS_LINK_CHG));
++
++	for (i = 0; i < 100; i++) {
++		udelay(20);
++		tw32_carefully(MAC_STATUS,
++			(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
++		if ((tr32(MAC_STATUS) &
++		     (MAC_STATUS_SYNC_CHANGED |
++		      MAC_STATUS_CFG_CHANGED)) == 0)
++			break;
++	}
++
++	if ((tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED) == 0)
++		current_link_up = 0;
++
++	if (current_link_up == 1) {
++		tp->link_config.active_speed = SPEED_1000;
++		tp->link_config.active_duplex = DUPLEX_FULL;
++	} else {
++		tp->link_config.active_speed = SPEED_INVALID;
++		tp->link_config.active_duplex = DUPLEX_INVALID;
++	}
++
++	if (current_link_up != tp->carrier_ok) {
++		tp->carrier_ok = current_link_up;
++		tg3_link_report(tp);
++	} else {
++		uint32_t now_pause_cfg =
++			tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
++					 TG3_FLAG_TX_PAUSE);
++		if (orig_pause_cfg != now_pause_cfg ||
++		    orig_active_speed != tp->link_config.active_speed ||
++		    orig_active_duplex != tp->link_config.active_duplex)
++			tg3_link_report(tp);
++	}
++
++	if ((tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED) == 0) {
++		tw32_carefully(MAC_MODE, tp->mac_mode | MAC_MODE_LINK_POLARITY);
++		if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) {
++			tw32_carefully(MAC_MODE, tp->mac_mode);
++		}
++	}
++
++	return 0;
++}
++#else
++#define tg3_setup_fiber_phy(TP) (-EINVAL)
++#endif /* SUPPORT_FIBER_PHY */
++
++static int tg3_setup_phy(struct tg3 *tp)
++{
++	int err;
++
++	if (tp->phy_id == PHY_ID_SERDES) {
++		err = tg3_setup_fiber_phy(tp);
++	} else {
++		err = tg3_setup_copper_phy(tp);
++	}
++
++	if (tp->link_config.active_speed == SPEED_1000 &&
++	    tp->link_config.active_duplex == DUPLEX_HALF)
++		tw32(MAC_TX_LENGTHS,
++		     ((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
++		      (6 << TX_LENGTHS_IPG_SHIFT) |
++		      (0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
++	else
++		tw32(MAC_TX_LENGTHS,
++		     ((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
++		      (6 << TX_LENGTHS_IPG_SHIFT) |
++		      (32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
++
++	return err;
++}
++
++
++#define MAX_WAIT_CNT 1000
++
++/* To stop a block, clear the enable bit and poll till it
++ * clears.  
++ */
++static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, uint32_t enable_bit)
++{
++	unsigned int i;
++	uint32_t val;
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
++		switch(ofs) {
++		case RCVLSC_MODE:
++		case DMAC_MODE:
++		case MBFREE_MODE:
++		case BUFMGR_MODE:
++		case MEMARB_MODE:
++			/* We can't enable/disable these bits of the
++			 * 5705, just say success.
++			 */
++			return 0;
++		default:
++			break;
++		}
++	}
++	val = tr32(ofs);
++	val &= ~enable_bit;
++	tw32(ofs, val);
++	tr32(ofs);
++
++	for (i = 0; i < MAX_WAIT_CNT; i++) {
++		udelay(100);
++		val = tr32(ofs);
++		if ((val & enable_bit) == 0)
++			break;
++	}
++
++	if (i == MAX_WAIT_CNT) {
++		printf("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
++		       ofs, enable_bit);
++		return -ENODEV;
++	}
++
++	return 0;
++}
++
++static int tg3_abort_hw(struct tg3 *tp)
++{
++	int i, err;
++
++	tg3_disable_ints(tp);
++
++	tp->rx_mode &= ~RX_MODE_ENABLE;
++	tw32_carefully(MAC_RX_MODE, tp->rx_mode);
++
++	err  = tg3_stop_block(tp, RCVBDI_MODE,   RCVBDI_MODE_ENABLE);
++	err |= tg3_stop_block(tp, RCVLPC_MODE,   RCVLPC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, RCVLSC_MODE,   RCVLSC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, RCVDBDI_MODE,  RCVDBDI_MODE_ENABLE);
++	err |= tg3_stop_block(tp, RCVDCC_MODE,   RCVDCC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, RCVCC_MODE,    RCVCC_MODE_ENABLE);
++
++	err |= tg3_stop_block(tp, SNDBDS_MODE,   SNDBDS_MODE_ENABLE);
++	err |= tg3_stop_block(tp, SNDBDI_MODE,   SNDBDI_MODE_ENABLE);
++	err |= tg3_stop_block(tp, SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
++	err |= tg3_stop_block(tp, RDMAC_MODE,    RDMAC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, SNDDATAC_MODE, SNDDATAC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, SNDBDC_MODE,   SNDBDC_MODE_ENABLE);
++	if (err)
++		goto out;
++
++	tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
++	tw32_carefully(MAC_MODE, tp->mac_mode);
++
++	tp->tx_mode &= ~TX_MODE_ENABLE;
++	tw32_carefully(MAC_TX_MODE, tp->tx_mode);
++
++	for (i = 0; i < MAX_WAIT_CNT; i++) {
++		udelay(100);
++		if (!(tr32(MAC_TX_MODE) & TX_MODE_ENABLE))
++			break;
++	}
++	if (i >= MAX_WAIT_CNT) {
++		printf("tg3_abort_hw timed out TX_MODE_ENABLE will not clear MAC_TX_MODE=%x\n",
++			tr32(MAC_TX_MODE));
++		return -ENODEV;
++	}
++
++	err  = tg3_stop_block(tp, HOSTCC_MODE, HOSTCC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, WDMAC_MODE,  WDMAC_MODE_ENABLE);
++	err |= tg3_stop_block(tp, MBFREE_MODE, MBFREE_MODE_ENABLE);
++
++	tw32(FTQ_RESET, 0xffffffff);
++	tw32(FTQ_RESET, 0x00000000);
++
++	err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE);
++	err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE);
++	if (err)
++		goto out;
++
++	memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
++
++out:
++	return err;
++}
++
++static void tg3_chip_reset(struct tg3 *tp)
++{
++	uint32_t val;
++
++	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_5704)) {
++		/* Force NVRAM to settle.
++		 * This deals with a chip bug which can result in EEPROM
++		 * corruption.
++		 */
++		if (tp->tg3_flags & TG3_FLAG_NVRAM) {
++			int i;
++	
++			tw32(NVRAM_SWARB, SWARB_REQ_SET1);
++			for (i = 0; i < 100000; i++) {
++				if (tr32(NVRAM_SWARB) & SWARB_GNT1)
++					break;
++				udelay(10);
++			}
++		}
++	}
++	/* In Etherboot we don't need to worry about the 5701
++	 * REG_WRITE_BUG because we do all register writes indirectly.
++	 */
++
++	/* do the reset */
++	val = GRC_MISC_CFG_CORECLK_RESET;
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
++		val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
++	tw32(GRC_MISC_CFG, val);
++
++	/* Flush PCI posted writes.  The normal MMIO registers
++	 * are inaccessible at this time so this is the only
++	 * way to make this reliably.  I tried to use indirect
++	 * register read/write but this upset some 5701 variants.
++	 */
++	pci_read_config_dword(tp->pdev, PCI_COMMAND, &val);
++
++	udelay(120);
++
++	/* Re-enable indirect register accesses. */
++	pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
++			       tp->misc_host_ctrl);
++
++	/* Set MAX PCI retry to zero. */
++	val = (PCISTATE_ROM_ENABLE | PCISTATE_ROM_RETRY_ENABLE);
++	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
++	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE))
++		val |= PCISTATE_RETRY_SAME_DMA;
++	pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, val);
++
++	pci_restore_state(tp->pdev, tp->pci_cfg_state);
++
++	/* Make sure PCI-X relaxed ordering bit is clear. */
++	pci_read_config_dword(tp->pdev, TG3PCI_X_CAPS, &val);
++	val &= ~PCIX_CAPS_RELAXED_ORDERING;
++	pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
++
++	tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
++
++	if (((tp->nic_sram_data_cfg & NIC_SRAM_DATA_CFG_MINI_PCI) != 0) &&
++		(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
++		tp->pci_clock_ctrl |=
++			(CLOCK_CTRL_FORCE_CLKRUN | CLOCK_CTRL_CLKRUN_OENABLE);
++		tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
++	}
++
++	tw32(TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl);
++}
++
++static void tg3_stop_fw(struct tg3 *tp)
++{
++	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
++		uint32_t val;
++		int i;
++
++		tg3_write_mem(NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
++		val = tr32(GRC_RX_CPU_EVENT);
++		val |= (1 << 14);
++		tw32(GRC_RX_CPU_EVENT, val);
++
++		/* Wait for RX cpu to ACK the event.  */
++		for (i = 0; i < 100; i++) {
++			if (!(tr32(GRC_RX_CPU_EVENT) & (1 << 14)))
++				break;
++			udelay(1);
++		}
++	}
++}
++
++static int tg3_restart_fw(struct tg3 *tp, uint32_t state)
++{
++	uint32_t val;
++	int i;
++	
++	tg3_write_mem(NIC_SRAM_FIRMWARE_MBOX, 
++		NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
++	/* Wait for firmware initialization to complete. */
++	for (i = 0; i < 100000; i++) {
++		tg3_read_mem(NIC_SRAM_FIRMWARE_MBOX, &val);
++		if (val == (uint32_t) ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
++			break;
++		udelay(10);
++	}
++	if (i >= 100000 &&
++		    !(tp->tg3_flags2 & TG3_FLG2_SUN_5704)) {
++		printf("Firmware will not restart magic=%x\n",
++			val);
++		return -ENODEV;
++	}
++	if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
++		state = DRV_STATE_SUSPEND;
++	}
++	tg3_write_mem(NIC_SRAM_FW_DRV_STATE_MBOX, state);
++	return 0;
++}
++
++static int tg3_halt(struct tg3 *tp)
++{
++	tg3_stop_fw(tp);
++	tg3_abort_hw(tp);
++	tg3_chip_reset(tp);
++	return tg3_restart_fw(tp, DRV_STATE_UNLOAD);
++}
++
++static void __tg3_set_mac_addr(struct tg3 *tp)
++{
++	uint32_t addr_high, addr_low;
++	int i;
++
++	addr_high = ((tp->nic->node_addr[0] << 8) |
++		     tp->nic->node_addr[1]);
++	addr_low = ((tp->nic->node_addr[2] << 24) |
++		    (tp->nic->node_addr[3] << 16) |
++		    (tp->nic->node_addr[4] <<  8) |
++		    (tp->nic->node_addr[5] <<  0));
++	for (i = 0; i < 4; i++) {
++		tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
++		tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
++	}
++
++	if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
++		(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
++		(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705)) {
++		for(i = 0; i < 12; i++) {
++			tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high);
++			tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low);
++		}
++	}
++	addr_high = (tp->nic->node_addr[0] +
++		     tp->nic->node_addr[1] +
++		     tp->nic->node_addr[2] +
++		     tp->nic->node_addr[3] +
++		     tp->nic->node_addr[4] +
++		     tp->nic->node_addr[5]) &
++		TX_BACKOFF_SEED_MASK;
++	tw32(MAC_TX_BACKOFF_SEED, addr_high);
++}
++
++static void tg3_set_bdinfo(struct tg3 *tp, uint32_t bdinfo_addr,
++			   dma_addr_t mapping, uint32_t maxlen_flags,
++			   uint32_t nic_addr)
++{
++	tg3_write_mem((bdinfo_addr +
++		       TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH),
++		      ((uint64_t) mapping >> 32));
++	tg3_write_mem((bdinfo_addr +
++		       TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW),
++		      ((uint64_t) mapping & 0xffffffff));
++	tg3_write_mem((bdinfo_addr +
++		       TG3_BDINFO_MAXLEN_FLAGS),
++		       maxlen_flags);
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++		tg3_write_mem((bdinfo_addr + TG3_BDINFO_NIC_ADDR), nic_addr);
++	}
++}
++
++
++static void tg3_init_rings(struct tg3 *tp)
++{
++	unsigned i;
++
++	/* Zero out the tg3 variables */
++	memset(&tg3_bss, 0, sizeof(tg3_bss));
++	tp->rx_std    = &tg3_bss.rx_std[0];
++	tp->rx_rcb    = &tg3_bss.rx_rcb[0];
++	tp->tx_ring   = &tg3_bss.tx_ring[0];
++	tp->hw_status = &tg3_bss.hw_status;
++	tp->hw_stats  = &tg3_bss.hw_stats;
++	tp->mac_mode  = 0;
++
++
++	/* Initialize tx/rx rings for packet processing.
++	 *
++	 * The chip has been shut down and the driver detached from
++	 * the networking, so no interrupts or new tx packets will
++	 * end up in the driver.
++	 */
++
++	/* Initialize invariants of the rings, we only set this
++	 * stuff once.  This works because the card does not
++	 * write into the rx buffer posting rings.
++	 */
++	for (i = 0; i < TG3_RX_RING_SIZE; i++) {
++		struct tg3_rx_buffer_desc *rxd;
++
++		rxd = &tp->rx_std[i];
++		rxd->idx_len = (RX_PKT_BUF_SZ - 2 - 64)	<< RXD_LEN_SHIFT;
++		rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
++		rxd->opaque = (RXD_OPAQUE_RING_STD | (i << RXD_OPAQUE_INDEX_SHIFT));
++
++		/* Note where the receive buffer for the ring is placed */
++		rxd->addr_hi = 0;
++		rxd->addr_lo = virt_to_bus(
++			&tg3_bss.rx_bufs[i%TG3_DEF_RX_RING_PENDING][2]);
++	}
++}
++
++#define TG3_WRITE_SETTINGS(TABLE) \
++do { \
++	const uint32_t *_table, *_end; \
++	_table = TABLE; \
++	_end = _table + sizeof(TABLE)/sizeof(TABLE[0]);  \
++	for(; _table < _end; _table += 2) { \
++		tw32(_table[0], _table[1]); \
++	} \
++} while(0)
++
++
++/* initialize/reset the tg3 */
++static int tg3_setup_hw(struct tg3 *tp)
++{
++	uint32_t val, rdmac_mode;
++	int i, err, limit;
++
++	/* Simply don't support setups with extremly buggy firmware in etherboot */
++	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
++		printf("Error 5701_A0 firmware bug detected\n");
++		return -EINVAL;
++	}
++
++	tg3_disable_ints(tp);
++
++	/* Originally this was all in tg3_init_hw */
++
++	/* Force the chip into D0. */
++	tg3_set_power_state_0(tp);
++
++	tg3_switch_clocks(tp);
++
++	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
++
++
++	/* Originally this was all in tg3_reset_hw */
++
++	tg3_stop_fw(tp);
++
++	/* No need to call tg3_abort_hw here, it is called before tg3_setup_hw. */
++
++	tg3_chip_reset(tp);
++
++	tw32(GRC_MODE, tp->grc_mode);  /* Redundant? */
++
++	err = tg3_restart_fw(tp, DRV_STATE_START);
++	if (err)
++		return err;
++
++	if (tp->phy_id == PHY_ID_SERDES) {
++		tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
++	}
++	tw32_carefully(MAC_MODE, tp->mac_mode);
++
++
++	/* This works around an issue with Athlon chipsets on
++	 * B3 tigon3 silicon.  This bit has no effect on any
++	 * other revision.
++	 */
++	tp->pci_clock_ctrl |= CLOCK_CTRL_DELAY_PCI_GRANT;
++	tw32_carefully(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
++
++	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
++	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
++		val = tr32(TG3PCI_PCISTATE);
++		val |= PCISTATE_RETRY_SAME_DMA;
++		tw32(TG3PCI_PCISTATE, val);
++	}
++
++	/* Descriptor ring init may make accesses to the
++	 * NIC SRAM area to setup the TX descriptors, so we
++	 * can only do this after the hardware has been
++	 * successfully reset.
++	 */
++	tg3_init_rings(tp);
++
++	/* Clear statistics/status block in chip */
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++		for (i = NIC_SRAM_STATS_BLK;
++		     i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
++		     i += sizeof(uint32_t)) {
++			tg3_write_mem(i, 0);
++			udelay(40);
++		}
++	}
++
++	/* This value is determined during the probe time DMA
++	 * engine test, tg3_setup_dma.
++	 */
++	tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
++
++	tp->grc_mode &= ~(GRC_MODE_HOST_SENDBDS |
++			  GRC_MODE_4X_NIC_SEND_RINGS |
++			  GRC_MODE_NO_TX_PHDR_CSUM |
++			  GRC_MODE_NO_RX_PHDR_CSUM);
++	tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
++	tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
++	tp->grc_mode |= GRC_MODE_NO_RX_PHDR_CSUM;
++
++	tw32(GRC_MODE,
++		tp->grc_mode | 
++		(GRC_MODE_IRQ_ON_MAC_ATTN | GRC_MODE_HOST_STACKUP));
++
++	/* Setup the timer prescalar register.  Clock is always 66Mhz. */
++	tw32(GRC_MISC_CFG,
++	     (65 << GRC_MISC_CFG_PRESCALAR_SHIFT));
++
++	/* Initialize MBUF/DESC pool. */
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++		tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE);
++		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
++			tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE64);
++		else
++			tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE96);
++		tw32(BUFMGR_DMA_DESC_POOL_ADDR, NIC_SRAM_DMA_DESC_POOL_BASE);
++		tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
++	}
++	if (!(tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE)) {
++		tw32(BUFMGR_MB_RDMA_LOW_WATER,
++		     tp->bufmgr_config.mbuf_read_dma_low_water);
++		tw32(BUFMGR_MB_MACRX_LOW_WATER,
++		     tp->bufmgr_config.mbuf_mac_rx_low_water);
++		tw32(BUFMGR_MB_HIGH_WATER,
++		     tp->bufmgr_config.mbuf_high_water);
++	} else {
++		tw32(BUFMGR_MB_RDMA_LOW_WATER,
++		     tp->bufmgr_config.mbuf_read_dma_low_water_jumbo);
++		tw32(BUFMGR_MB_MACRX_LOW_WATER,
++		     tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo);
++		tw32(BUFMGR_MB_HIGH_WATER,
++		     tp->bufmgr_config.mbuf_high_water_jumbo);
++	}
++	tw32(BUFMGR_DMA_LOW_WATER,
++	     tp->bufmgr_config.dma_low_water);
++	tw32(BUFMGR_DMA_HIGH_WATER,
++	     tp->bufmgr_config.dma_high_water);
++
++	tw32(BUFMGR_MODE, BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
++	for (i = 0; i < 2000; i++) {
++		if (tr32(BUFMGR_MODE) & BUFMGR_MODE_ENABLE)
++			break;
++		udelay(10);
++	}
++	if (i >= 2000) {
++		printf("tg3_setup_hw cannot enable BUFMGR\n");
++		return -ENODEV;
++	}
++
++	tw32(FTQ_RESET, 0xffffffff);
++	tw32(FTQ_RESET, 0x00000000);
++	for (i = 0; i < 2000; i++) {
++		if (tr32(FTQ_RESET) == 0x00000000)
++			break;
++		udelay(10);
++	}
++	if (i >= 2000) {
++		printf("tg3_setup_hw cannot reset FTQ\n");
++		return -ENODEV;
++	}
++
++	/* Initialize TG3_BDINFO's at:
++	 *  RCVDBDI_STD_BD:	standard eth size rx ring
++	 *  RCVDBDI_JUMBO_BD:	jumbo frame rx ring
++	 *  RCVDBDI_MINI_BD:	small frame rx ring (??? does not work)
++	 *
++	 * like so:
++	 *  TG3_BDINFO_HOST_ADDR:	high/low parts of DMA address of ring
++	 *  TG3_BDINFO_MAXLEN_FLAGS:	(rx max buffer size << 16) |
++	 *                              ring attribute flags
++	 *  TG3_BDINFO_NIC_ADDR:	location of descriptors in nic SRAM
++	 *
++	 * Standard receive ring @ NIC_SRAM_RX_BUFFER_DESC, 512 entries.
++	 * Jumbo receive ring @ NIC_SRAM_RX_JUMBO_BUFFER_DESC, 256 entries.
++	 *
++	 * ??? No space allocated for mini receive ring? :(
++	 *
++	 * The size of each ring is fixed in the firmware, but the location is
++	 * configurable.
++	 */
++	{
++		static const uint32_t table_all[] = {
++			/* Setup replenish thresholds. */
++			RCVBDI_STD_THRESH, TG3_DEF_RX_RING_PENDING / 8,
++
++			/* Etherboot lives below 4GB */
++			RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH, 0,
++			RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR, NIC_SRAM_RX_BUFFER_DESC,
++		};
++		static const uint32_t table_not_5705[] = {
++			/* Buffer maximum length */
++			RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, RX_STD_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT,
++			
++			/* Disable the mini frame rx ring */
++			RCVDBDI_MINI_BD + TG3_BDINFO_MAXLEN_FLAGS,	BDINFO_FLAGS_DISABLED,
++			
++			/* Disable the jumbo frame rx ring */
++			RCVBDI_JUMBO_THRESH, 0,
++			RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS, BDINFO_FLAGS_DISABLED,
++			
++			
++		};
++		TG3_WRITE_SETTINGS(table_all);
++		tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW, 
++			virt_to_bus(tp->rx_std));
++		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
++			tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS,
++				RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT);
++		} else {
++			TG3_WRITE_SETTINGS(table_not_5705);
++		}
++	}
++
++	
++	/* There is only one send ring on 5705, no need to explicitly
++	 * disable the others.
++	 */
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++		/* Clear out send RCB ring in SRAM. */
++		for (i = NIC_SRAM_SEND_RCB; i < NIC_SRAM_RCV_RET_RCB; i += TG3_BDINFO_SIZE)
++			tg3_write_mem(i + TG3_BDINFO_MAXLEN_FLAGS, BDINFO_FLAGS_DISABLED);
++	}
++
++	tp->tx_prod = 0;
++	tw32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
++	tw32_mailbox2(MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
++
++	tg3_set_bdinfo(tp,
++		NIC_SRAM_SEND_RCB,
++		virt_to_bus(tp->tx_ring),
++		(TG3_TX_RING_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT),
++		NIC_SRAM_TX_BUFFER_DESC);
++
++	/* There is only one receive return ring on 5705, no need to explicitly
++	 * disable the others.
++	 */
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++		for (i = NIC_SRAM_RCV_RET_RCB; i < NIC_SRAM_STATS_BLK; i += TG3_BDINFO_SIZE) {
++			tg3_write_mem(i + TG3_BDINFO_MAXLEN_FLAGS,
++				BDINFO_FLAGS_DISABLED);
++		}
++	}
++
++	tp->rx_rcb_ptr = 0;
++	tw32_mailbox2(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, 0);
++
++	tg3_set_bdinfo(tp,
++		NIC_SRAM_RCV_RET_RCB,
++		virt_to_bus(tp->rx_rcb),
++		(TG3_RX_RCB_RING_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT),
++		0);
++
++	tp->rx_std_ptr = TG3_DEF_RX_RING_PENDING;
++	tw32_mailbox2(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
++		     tp->rx_std_ptr);
++
++	tw32_mailbox2(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW, 0);
++
++	/* Initialize MAC address and backoff seed. */
++	__tg3_set_mac_addr(tp);
++
++	/* Calculate RDMAC_MODE setting early, we need it to determine
++	 * the RCVLPC_STATE_ENABLE mask.
++	 */
++	rdmac_mode = (RDMAC_MODE_ENABLE | RDMAC_MODE_TGTABORT_ENAB |
++		RDMAC_MODE_MSTABORT_ENAB | RDMAC_MODE_PARITYERR_ENAB |
++		RDMAC_MODE_ADDROFLOW_ENAB | RDMAC_MODE_FIFOOFLOW_ENAB |
++		RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |
++		RDMAC_MODE_LNGREAD_ENAB);
++	if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)
++		rdmac_mode |= RDMAC_MODE_SPLIT_ENABLE;
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
++		if (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
++			if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
++				!(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
++				rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
++			}
++		}
++	}
++
++	/* Setup host coalescing engine. */
++	tw32(HOSTCC_MODE, 0);
++	for (i = 0; i < 2000; i++) {
++		if (!(tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE))
++			break;
++		udelay(10);
++	}
++
++	tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
++		MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
++	tw32_carefully(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR);
++
++	tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
++		tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
++				       GRC_LCLCTRL_GPIO_OUTPUT1);
++	tw32_carefully(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
++
++	tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
++	tr32(MAILBOX_INTERRUPT_0);
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++		tw32_carefully(DMAC_MODE, DMAC_MODE_ENABLE);
++	}
++
++	val = (	WDMAC_MODE_ENABLE | WDMAC_MODE_TGTABORT_ENAB |
++		WDMAC_MODE_MSTABORT_ENAB | WDMAC_MODE_PARITYERR_ENAB |
++		WDMAC_MODE_ADDROFLOW_ENAB | WDMAC_MODE_FIFOOFLOW_ENAB |
++		WDMAC_MODE_FIFOURUN_ENAB | WDMAC_MODE_FIFOOREAD_ENAB |
++		WDMAC_MODE_LNGREAD_ENAB);
++	if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) &&
++		((tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) != 0) &&
++		!(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
++		val |= WDMAC_MODE_RX_ACCEL;
++	}
++	tw32_carefully(WDMAC_MODE, val);
++
++	if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) {
++		val = tr32(TG3PCI_X_CAPS);
++		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) {
++			val &= PCIX_CAPS_BURST_MASK;
++			val |= (PCIX_CAPS_MAX_BURST_CPIOB << PCIX_CAPS_BURST_SHIFT);
++		} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
++			val &= ~(PCIX_CAPS_SPLIT_MASK | PCIX_CAPS_BURST_MASK);
++			val |= (PCIX_CAPS_MAX_BURST_CPIOB << PCIX_CAPS_BURST_SHIFT);
++			if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)
++				val |= (tp->split_mode_max_reqs <<
++					PCIX_CAPS_SPLIT_SHIFT);
++		}
++		tw32(TG3PCI_X_CAPS, val);
++	}
++
++	tw32_carefully(RDMAC_MODE, rdmac_mode);
++	{
++		static const uint32_t table_all[] = {
++			/* MTU + ethernet header + FCS + optional VLAN tag */
++			MAC_RX_MTU_SIZE, ETH_MAX_MTU + ETH_HLEN + 8,
++			
++			/* The slot time is changed by tg3_setup_phy if we
++			 * run at gigabit with half duplex.
++			 */
++			MAC_TX_LENGTHS,	
++			(2 << TX_LENGTHS_IPG_CRS_SHIFT) |
++			(6 << TX_LENGTHS_IPG_SHIFT) |
++			(32 << TX_LENGTHS_SLOT_TIME_SHIFT),
++			
++			/* Receive rules. */
++			MAC_RCV_RULE_CFG, RCV_RULE_CFG_DEFAULT_CLASS,
++			RCVLPC_CONFIG, 0x0181,
++			
++			/* Receive/send statistics. */
++			RCVLPC_STATS_ENABLE, 0xffffff,
++			RCVLPC_STATSCTRL, RCVLPC_STATSCTRL_ENABLE,
++			SNDDATAI_STATSENAB, 0xffffff,
++			SNDDATAI_STATSCTRL, (SNDDATAI_SCTRL_ENABLE |SNDDATAI_SCTRL_FASTUPD),
++			
++			/* Host coalescing engine */
++			HOSTCC_RXCOL_TICKS, 0,
++			HOSTCC_TXCOL_TICKS, LOW_TXCOL_TICKS,
++			HOSTCC_RXMAX_FRAMES, 1,
++			HOSTCC_TXMAX_FRAMES, LOW_RXMAX_FRAMES,
++			HOSTCC_RXCOAL_MAXF_INT, 1,
++			HOSTCC_TXCOAL_MAXF_INT, 0,
++			
++			/* Status/statistics block address. */
++			/* Etherboot lives below 4GB, so HIGH == 0 */
++			HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, 0,
++
++			/* No need to enable 32byte coalesce mode. */
++			HOSTCC_MODE, HOSTCC_MODE_ENABLE | 0,
++			
++			RCVCC_MODE, RCVCC_MODE_ENABLE | RCVCC_MODE_ATTN_ENABLE,
++			RCVLPC_MODE, RCVLPC_MODE_ENABLE,
++			
++			RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE,
++
++			SNDDATAC_MODE, SNDDATAC_MODE_ENABLE,
++			SNDBDC_MODE, SNDBDC_MODE_ENABLE | SNDBDC_MODE_ATTN_ENABLE,
++			RCVBDI_MODE, RCVBDI_MODE_ENABLE | RCVBDI_MODE_RCB_ATTN_ENAB,
++			RCVDBDI_MODE, RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ,
++			SNDDATAI_MODE, SNDDATAI_MODE_ENABLE,
++			SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE,
++			SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE,
++			
++			/* Accept all multicast frames. */
++			MAC_HASH_REG_0, 0xffffffff,
++			MAC_HASH_REG_1, 0xffffffff,
++			MAC_HASH_REG_2, 0xffffffff,
++			MAC_HASH_REG_3, 0xffffffff,
++		};
++		static const uint32_t table_not_5705[] = {
++			/* Host coalescing engine */
++			HOSTCC_RXCOAL_TICK_INT, 0,
++			HOSTCC_TXCOAL_TICK_INT, 0,
++
++			/* Status/statistics block address. */
++			/* Etherboot lives below 4GB, so HIGH == 0 */
++			HOSTCC_STAT_COAL_TICKS, DEFAULT_STAT_COAL_TICKS,
++			HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, 0,
++			HOSTCC_STATS_BLK_NIC_ADDR, NIC_SRAM_STATS_BLK,
++			HOSTCC_STATUS_BLK_NIC_ADDR, NIC_SRAM_STATUS_BLK,
++
++			RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE,
++
++			MBFREE_MODE, MBFREE_MODE_ENABLE,
++		};
++		TG3_WRITE_SETTINGS(table_all);
++		tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
++			virt_to_bus(tp->hw_stats));
++		tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
++			virt_to_bus(tp->hw_status));
++		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
++			TG3_WRITE_SETTINGS(table_not_5705);
++		}
++	}
++
++	tp->tx_mode = TX_MODE_ENABLE;
++	tw32_carefully(MAC_TX_MODE, tp->tx_mode);
++
++	tp->rx_mode = RX_MODE_ENABLE;
++	tw32_carefully(MAC_RX_MODE, tp->rx_mode);
++
++	tp->mi_mode = MAC_MI_MODE_BASE;
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode);
++
++	tw32(MAC_LED_CTRL, 0);
++	tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
++	if (tp->phy_id == PHY_ID_SERDES) {
++		tw32_carefully(MAC_RX_MODE, RX_MODE_RESET);
++	}
++	tp->rx_mode |= RX_MODE_KEEP_VLAN_TAG; /* drop tagged vlan packets */
++	tw32_carefully(MAC_RX_MODE, tp->rx_mode);
++
++	if (tp->pci_chip_rev_id == CHIPREV_ID_5703_A1)
++		tw32(MAC_SERDES_CFG, 0x616000);
++
++	/* Prevent chip from dropping frames when flow control
++	 * is enabled.
++	 */
++	tw32(MAC_LOW_WMARK_MAX_RX_FRAME, 2);
++	tr32(MAC_LOW_WMARK_MAX_RX_FRAME);
++
++	err = tg3_setup_phy(tp);
++
++	/* Ignore CRC stats */
++
++	/* Initialize receive rules. */
++	tw32(MAC_RCV_RULE_0,  0xc2000000 & RCV_RULE_DISABLE_MASK);
++	tw32(MAC_RCV_VALUE_0, 0xffffffff & RCV_RULE_DISABLE_MASK);
++	tw32(MAC_RCV_RULE_1,  0x86000004 & RCV_RULE_DISABLE_MASK);
++	tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
++		limit = 8;
++	else
++		limit = 16;
++	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
++		limit -= 4;
++	switch (limit) {
++	case 16:	tw32(MAC_RCV_RULE_15,  0); tw32(MAC_RCV_VALUE_15,  0);
++	case 15:	tw32(MAC_RCV_RULE_14,  0); tw32(MAC_RCV_VALUE_14,  0);
++	case 14:	tw32(MAC_RCV_RULE_13,  0); tw32(MAC_RCV_VALUE_13,  0);
++	case 13:	tw32(MAC_RCV_RULE_12,  0); tw32(MAC_RCV_VALUE_12,  0);
++	case 12:	tw32(MAC_RCV_RULE_11,  0); tw32(MAC_RCV_VALUE_11,  0);
++	case 11:	tw32(MAC_RCV_RULE_10,  0); tw32(MAC_RCV_VALUE_10,  0);
++	case 10:	tw32(MAC_RCV_RULE_9,  0);  tw32(MAC_RCV_VALUE_9,  0);
++	case 9:		tw32(MAC_RCV_RULE_8,  0);  tw32(MAC_RCV_VALUE_8,  0);
++	case 8:		tw32(MAC_RCV_RULE_7,  0);  tw32(MAC_RCV_VALUE_7,  0);
++	case 7:		tw32(MAC_RCV_RULE_6,  0);  tw32(MAC_RCV_VALUE_6,  0);
++	case 6:		tw32(MAC_RCV_RULE_5,  0);  tw32(MAC_RCV_VALUE_5,  0);
++	case 5:		tw32(MAC_RCV_RULE_4,  0);  tw32(MAC_RCV_VALUE_4,  0);
++	case 4:		/* tw32(MAC_RCV_RULE_3,  0); tw32(MAC_RCV_VALUE_3,  0); */
++	case 3:		/* tw32(MAC_RCV_RULE_2,  0); tw32(MAC_RCV_VALUE_2,  0); */
++	case 2:
++	case 1:
++	default:
++		break;
++	};
++
++	return err;
++}
++
++
++
++/* Chips other than 5700/5701 use the NVRAM for fetching info. */
++static void tg3_nvram_init(struct tg3 *tp)
++{
++	tw32(GRC_EEPROM_ADDR,
++	     (EEPROM_ADDR_FSM_RESET |
++	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
++	       EEPROM_ADDR_CLKPERD_SHIFT)));
++
++	mdelay(1);
++
++	/* Enable seeprom accesses. */
++	tw32_carefully(GRC_LOCAL_CTRL,
++		tr32(GRC_LOCAL_CTRL) | GRC_LCLCTRL_AUTO_SEEPROM);
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
++	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
++		uint32_t nvcfg1 = tr32(NVRAM_CFG1);
++
++		tp->tg3_flags |= TG3_FLAG_NVRAM;
++		if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
++			if (nvcfg1 & NVRAM_CFG1_BUFFERED_MODE)
++				tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
++		} else {
++			nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
++			tw32(NVRAM_CFG1, nvcfg1);
++		}
++
++	} else {
++		tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
++	}
++}
++
++
++static int tg3_nvram_read_using_eeprom(
++	struct tg3 *tp __unused, uint32_t offset, uint32_t *val)
++{
++	uint32_t tmp;
++	int i;
++
++	if (offset > EEPROM_ADDR_ADDR_MASK ||
++		(offset % 4) != 0) {
++		return -EINVAL;
++	}
++
++	tmp = tr32(GRC_EEPROM_ADDR) & ~(EEPROM_ADDR_ADDR_MASK |
++					EEPROM_ADDR_DEVID_MASK |
++					EEPROM_ADDR_READ);
++	tw32(GRC_EEPROM_ADDR,
++	     tmp |
++	     (0 << EEPROM_ADDR_DEVID_SHIFT) |
++	     ((offset << EEPROM_ADDR_ADDR_SHIFT) &
++	      EEPROM_ADDR_ADDR_MASK) |
++	     EEPROM_ADDR_READ | EEPROM_ADDR_START);
++
++	for (i = 0; i < 10000; i++) {
++		tmp = tr32(GRC_EEPROM_ADDR);
++
++		if (tmp & EEPROM_ADDR_COMPLETE)
++			break;
++		udelay(100);
++	}
++	if (!(tmp & EEPROM_ADDR_COMPLETE)) {
++		return -EBUSY;
++	}
++
++	*val = tr32(GRC_EEPROM_DATA);
++	return 0;
++}
++
++static int tg3_nvram_read(struct tg3 *tp, uint32_t offset, uint32_t *val)
++{
++	int i, saw_done_clear;
++
++	if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
++		return tg3_nvram_read_using_eeprom(tp, offset, val);
++
++	if (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED)
++		offset = ((offset / NVRAM_BUFFERED_PAGE_SIZE) <<
++			  NVRAM_BUFFERED_PAGE_POS) +
++			(offset % NVRAM_BUFFERED_PAGE_SIZE);
++
++	if (offset > NVRAM_ADDR_MSK)
++		return -EINVAL;
++
++	tw32(NVRAM_SWARB, SWARB_REQ_SET1);
++	for (i = 0; i < 1000; i++) {
++		if (tr32(NVRAM_SWARB) & SWARB_GNT1)
++			break;
++		udelay(20);
++	}
++
++	tw32(NVRAM_ADDR, offset);
++	tw32(NVRAM_CMD,
++	     NVRAM_CMD_RD | NVRAM_CMD_GO |
++	     NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
++
++	/* Wait for done bit to clear then set again. */
++	saw_done_clear = 0;
++	for (i = 0; i < 1000; i++) {
++		udelay(10);
++		if (!saw_done_clear &&
++		    !(tr32(NVRAM_CMD) & NVRAM_CMD_DONE))
++			saw_done_clear = 1;
++		else if (saw_done_clear &&
++			 (tr32(NVRAM_CMD) & NVRAM_CMD_DONE))
++			break;
++	}
++	if (i >= 1000) {
++		tw32(NVRAM_SWARB, SWARB_REQ_CLR1);
++		return -EBUSY;
++	}
++
++	*val = bswap_32(tr32(NVRAM_RDDATA));
++	tw32(NVRAM_SWARB, 0x20);
++
++	return 0;
++}
++
++struct subsys_tbl_ent {
++	uint16_t subsys_vendor, subsys_devid;
++	uint32_t phy_id;
++};
++
++static struct subsys_tbl_ent subsys_id_to_phy_id[] = {
++	/* Broadcom boards. */
++	{ 0x14e4, 0x1644, PHY_ID_BCM5401 }, /* BCM95700A6 */
++	{ 0x14e4, 0x0001, PHY_ID_BCM5701 }, /* BCM95701A5 */
++	{ 0x14e4, 0x0002, PHY_ID_BCM8002 }, /* BCM95700T6 */
++	{ 0x14e4, 0x0003, PHY_ID_SERDES  }, /* BCM95700A9 */
++	{ 0x14e4, 0x0005, PHY_ID_BCM5701 }, /* BCM95701T1 */
++	{ 0x14e4, 0x0006, PHY_ID_BCM5701 }, /* BCM95701T8 */
++	{ 0x14e4, 0x0007, PHY_ID_SERDES  }, /* BCM95701A7 */
++	{ 0x14e4, 0x0008, PHY_ID_BCM5701 }, /* BCM95701A10 */
++	{ 0x14e4, 0x8008, PHY_ID_BCM5701 }, /* BCM95701A12 */
++	{ 0x14e4, 0x0009, PHY_ID_BCM5701 }, /* BCM95703Ax1 */
++	{ 0x14e4, 0x8009, PHY_ID_BCM5701 }, /* BCM95703Ax2 */
++
++	/* 3com boards. */
++	{ PCI_VENDOR_ID_3COM, 0x1000, PHY_ID_BCM5401 }, /* 3C996T */
++	{ PCI_VENDOR_ID_3COM, 0x1006, PHY_ID_BCM5701 }, /* 3C996BT */
++	/* { PCI_VENDOR_ID_3COM, 0x1002, PHY_ID_XXX },     3C996CT */
++	/* { PCI_VENDOR_ID_3COM, 0x1003, PHY_ID_XXX },     3C997T */
++	{ PCI_VENDOR_ID_3COM, 0x1004, PHY_ID_SERDES  }, /* 3C996SX */
++	/* { PCI_VENDOR_ID_3COM, 0x1005, PHY_ID_XXX },     3C997SZ */
++	{ PCI_VENDOR_ID_3COM, 0x1007, PHY_ID_BCM5701 }, /* 3C1000T */
++	{ PCI_VENDOR_ID_3COM, 0x1008, PHY_ID_BCM5701 }, /* 3C940BR01 */
++
++	/* DELL boards. */
++	{ PCI_VENDOR_ID_DELL, 0x00d1, PHY_ID_BCM5401 }, /* VIPER */
++	{ PCI_VENDOR_ID_DELL, 0x0106, PHY_ID_BCM5401 }, /* JAGUAR */
++	{ PCI_VENDOR_ID_DELL, 0x0109, PHY_ID_BCM5411 }, /* MERLOT */
++	{ PCI_VENDOR_ID_DELL, 0x010a, PHY_ID_BCM5411 }, /* SLIM_MERLOT */
++
++	/* Compaq boards. */
++	{ PCI_VENDOR_ID_COMPAQ, 0x007c, PHY_ID_BCM5701 }, /* BANSHEE */
++	{ PCI_VENDOR_ID_COMPAQ, 0x009a, PHY_ID_BCM5701 }, /* BANSHEE_2 */
++	{ PCI_VENDOR_ID_COMPAQ, 0x007d, PHY_ID_SERDES  }, /* CHANGELING */
++	{ PCI_VENDOR_ID_COMPAQ, 0x0085, PHY_ID_BCM5701 }, /* NC7780 */
++	{ PCI_VENDOR_ID_COMPAQ, 0x0099, PHY_ID_BCM5701 }  /* NC7780_2 */
++};
++
++static int tg3_phy_probe(struct tg3 *tp)
++{
++	uint32_t eeprom_phy_id, hw_phy_id_1, hw_phy_id_2;
++	uint32_t hw_phy_id, hw_phy_id_masked;
++	enum phy_led_mode eeprom_led_mode;
++	uint32_t val;
++	unsigned i;
++	int eeprom_signature_found, err;
++
++	tp->phy_id = PHY_ID_INVALID;
++
++	for (i = 0; i < sizeof(subsys_id_to_phy_id)/sizeof(subsys_id_to_phy_id[0]); i++) {
++		if ((subsys_id_to_phy_id[i].subsys_vendor == tp->subsystem_vendor) &&
++			(subsys_id_to_phy_id[i].subsys_devid == tp->subsystem_device)) {
++			tp->phy_id = subsys_id_to_phy_id[i].phy_id;
++			break;
++		}
++	}
++
++	eeprom_phy_id = PHY_ID_INVALID;
++	eeprom_led_mode = led_mode_auto;
++	eeprom_signature_found = 0;
++	tg3_read_mem(NIC_SRAM_DATA_SIG, &val);
++	if (val == NIC_SRAM_DATA_SIG_MAGIC) {
++		uint32_t nic_cfg;
++
++		tg3_read_mem(NIC_SRAM_DATA_CFG, &nic_cfg);
++		tp->nic_sram_data_cfg = nic_cfg;
++
++		eeprom_signature_found = 1;
++
++		if ((nic_cfg & NIC_SRAM_DATA_CFG_PHY_TYPE_MASK) ==
++		    NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER) {
++			eeprom_phy_id = PHY_ID_SERDES;
++		} else {
++			uint32_t nic_phy_id;
++
++			tg3_read_mem(NIC_SRAM_DATA_PHY_ID, &nic_phy_id);
++			if (nic_phy_id != 0) {
++				uint32_t id1 = nic_phy_id & NIC_SRAM_DATA_PHY_ID1_MASK;
++				uint32_t id2 = nic_phy_id & NIC_SRAM_DATA_PHY_ID2_MASK;
++
++				eeprom_phy_id  = (id1 >> 16) << 10;
++				eeprom_phy_id |= (id2 & 0xfc00) << 16;
++				eeprom_phy_id |= (id2 & 0x03ff) <<  0;
++			}
++		}
++
++		switch (nic_cfg & NIC_SRAM_DATA_CFG_LED_MODE_MASK) {
++		case NIC_SRAM_DATA_CFG_LED_TRIPLE_SPD:
++			eeprom_led_mode = led_mode_three_link;
++			break;
++
++		case NIC_SRAM_DATA_CFG_LED_LINK_SPD:
++			eeprom_led_mode = led_mode_link10;
++			break;
++
++		default:
++			eeprom_led_mode = led_mode_auto;
++			break;
++		};
++		if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
++			(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
++			(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) &&
++			(nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)) {
++			tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
++		}
++
++		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE)
++			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
++		if (nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL)
++			tp->tg3_flags |= TG3_FLAG_SERDES_WOL_CAP;
++	}
++
++	/* Now read the physical PHY_ID from the chip and verify
++	 * that it is sane.  If it doesn't look good, we fall back
++	 * to either the hard-coded table based PHY_ID and failing
++	 * that the value found in the eeprom area.
++	 */
++	err  = tg3_readphy(tp, MII_PHYSID1, &hw_phy_id_1);
++	err |= tg3_readphy(tp, MII_PHYSID2, &hw_phy_id_2);
++
++	hw_phy_id  = (hw_phy_id_1 & 0xffff) << 10;
++	hw_phy_id |= (hw_phy_id_2 & 0xfc00) << 16;
++	hw_phy_id |= (hw_phy_id_2 & 0x03ff) <<  0;
++
++	hw_phy_id_masked = hw_phy_id & PHY_ID_MASK;
++
++	if (!err && KNOWN_PHY_ID(hw_phy_id_masked)) {
++		tp->phy_id = hw_phy_id;
++	} else {
++		/* phy_id currently holds the value found in the
++		 * subsys_id_to_phy_id[] table or PHY_ID_INVALID
++		 * if a match was not found there.
++		 */
++		if (tp->phy_id == PHY_ID_INVALID) {
++			if (!eeprom_signature_found ||
++			    !KNOWN_PHY_ID(eeprom_phy_id & PHY_ID_MASK))
++				return -ENODEV;
++			tp->phy_id = eeprom_phy_id;
++		}
++	}
++
++	err = tg3_phy_reset(tp);
++	if (err)
++		return err;
++
++	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
++	    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) {
++		uint32_t mii_tg3_ctrl;
++		
++		/* These chips, when reset, only advertise 10Mb
++		 * capabilities.  Fix that.
++		 */
++		err  = tg3_writephy(tp, MII_ADVERTISE,
++				    (ADVERTISE_CSMA |
++				     ADVERTISE_PAUSE_CAP |
++				     ADVERTISE_10HALF |
++				     ADVERTISE_10FULL |
++				     ADVERTISE_100HALF |
++				     ADVERTISE_100FULL));
++		mii_tg3_ctrl = (MII_TG3_CTRL_ADV_1000_HALF |
++				MII_TG3_CTRL_ADV_1000_FULL |
++				MII_TG3_CTRL_AS_MASTER |
++				MII_TG3_CTRL_ENABLE_AS_MASTER);
++		if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
++			mii_tg3_ctrl = 0;
++
++		err |= tg3_writephy(tp, MII_TG3_CTRL, mii_tg3_ctrl);
++		err |= tg3_writephy(tp, MII_BMCR,
++				    (BMCR_ANRESTART | BMCR_ANENABLE));
++	}
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) {
++		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
++		tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f);
++		tg3_writedsp(tp, MII_TG3_DSP_RW_PORT, 0x2aaa);
++	}
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
++		tg3_writephy(tp, 0x1c, 0x8d68);
++		tg3_writephy(tp, 0x1c, 0x8d68);
++	}
++
++	/* Enable Ethernet@WireSpeed */
++	tg3_phy_set_wirespeed(tp);
++
++	if (!err && ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)) {
++		err = tg3_init_5401phy_dsp(tp);
++	}
++
++	/* Determine the PHY led mode. 
++	 * Be careful if this gets set wrong it can result in an inability to 
++	 * establish a link.
++	 */
++	if (tp->phy_id == PHY_ID_SERDES) {
++		tp->led_mode = led_mode_three_link;
++	}
++	else if (tp->subsystem_vendor == PCI_VENDOR_ID_DELL) {
++		tp->led_mode = led_mode_link10;
++	} else {
++		tp->led_mode = led_mode_three_link;
++		if (eeprom_signature_found &&
++		    eeprom_led_mode != led_mode_auto)
++			tp->led_mode = eeprom_led_mode;
++	}
++
++	if (tp->phy_id == PHY_ID_SERDES)
++		tp->link_config.advertising =
++			(ADVERTISED_1000baseT_Half |
++			 ADVERTISED_1000baseT_Full |
++			 ADVERTISED_Autoneg |
++			 ADVERTISED_FIBRE);
++	if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
++		tp->link_config.advertising &=
++			~(ADVERTISED_1000baseT_Half |
++			  ADVERTISED_1000baseT_Full);
++
++	return err;
++}
++
++#if SUPPORT_PARTNO_STR
++static void tg3_read_partno(struct tg3 *tp)
++{
++	unsigned char vpd_data[256];
++	int i;
++
++	for (i = 0; i < 256; i += 4) {
++		uint32_t tmp;
++
++		if (tg3_nvram_read(tp, 0x100 + i, &tmp))
++			goto out_not_found;
++
++		vpd_data[i + 0] = ((tmp >>  0) & 0xff);
++		vpd_data[i + 1] = ((tmp >>  8) & 0xff);
++		vpd_data[i + 2] = ((tmp >> 16) & 0xff);
++		vpd_data[i + 3] = ((tmp >> 24) & 0xff);
++	}
++
++	/* Now parse and find the part number. */
++	for (i = 0; i < 256; ) {
++		unsigned char val = vpd_data[i];
++		int block_end;
++
++		if (val == 0x82 || val == 0x91) {
++			i = (i + 3 +
++			     (vpd_data[i + 1] +
++			      (vpd_data[i + 2] << 8)));
++			continue;
++		}
++
++		if (val != 0x90)
++			goto out_not_found;
++
++		block_end = (i + 3 +
++			     (vpd_data[i + 1] +
++			      (vpd_data[i + 2] << 8)));
++		i += 3;
++		while (i < block_end) {
++			if (vpd_data[i + 0] == 'P' &&
++			    vpd_data[i + 1] == 'N') {
++				int partno_len = vpd_data[i + 2];
++
++				if (partno_len > 24)
++					goto out_not_found;
++
++				memcpy(tp->board_part_number,
++				       &vpd_data[i + 3],
++				       partno_len);
++
++				/* Success. */
++				return;
++			}
++		}
++
++		/* Part number not found. */
++		goto out_not_found;
++	}
++
++out_not_found:
++	memcpy(tp->board_part_number, "none", sizeof("none"));
++}
++#else
++#define tg3_read_partno(TP) ((TP)->board_part_number[0] = '\0')
++#endif
++
++static int tg3_get_invariants(struct tg3 *tp)
++{
++	uint32_t misc_ctrl_reg;
++	uint32_t pci_state_reg, grc_misc_cfg;
++	uint16_t pci_cmd;
++	uint8_t  pci_latency;
++	int err;
++
++	/* Read the subsystem vendor and device ids */
++	pci_read_config_word(tp->pdev, PCI_SUBSYSTEM_VENDOR_ID, &tp->subsystem_vendor);
++	pci_read_config_word(tp->pdev, PCI_SUBSYSTEM_ID, &tp->subsystem_device);
++
++	/* The sun_5704 code needs infrastructure etherboot does have
++	 * ignore it for now.
++	 */
++
++	/* If we have an AMD 762 or Intel ICH/ICH0 chipset, write
++	 * reordering to the mailbox registers done by the host
++	 * controller can cause major troubles.  We read back from
++	 * every mailbox register write to force the writes to be
++	 * posted to the chip in order.
++	 *
++	 * TG3_FLAG_MBOX_WRITE_REORDER has been forced on.
++	 */
++
++	/* Force memory write invalidate off.  If we leave it on,
++	 * then on 5700_BX chips we have to enable a workaround.
++	 * The workaround is to set the TG3PCI_DMA_RW_CTRL boundry
++	 * to match the cacheline size.  The Broadcom driver have this
++	 * workaround but turns MWI off all the times so never uses
++	 * it.  This seems to suggest that the workaround is insufficient.
++	 */
++	pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
++	pci_cmd &= ~PCI_COMMAND_INVALIDATE;
++	/* Also, force SERR#/PERR# in PCI command. */
++	pci_cmd |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
++	pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
++
++	/* It is absolutely critical that TG3PCI_MISC_HOST_CTRL
++	 * has the register indirect write enable bit set before
++	 * we try to access any of the MMIO registers.  It is also
++	 * critical that the PCI-X hw workaround situation is decided
++	 * before that as well.
++	 */
++	pci_read_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, &misc_ctrl_reg);
++
++	tp->pci_chip_rev_id = (misc_ctrl_reg >> MISC_HOST_CTRL_CHIPREV_SHIFT);
++
++	/* Initialize misc host control in PCI block. */
++	tp->misc_host_ctrl |= (misc_ctrl_reg &
++			       MISC_HOST_CTRL_CHIPREV);
++	pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
++			       tp->misc_host_ctrl);
++
++	pci_read_config_byte(tp->pdev, PCI_LATENCY_TIMER, &pci_latency);
++	if (pci_latency < 64) {
++		pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER, 64);
++	}
++
++	pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &pci_state_reg);
++
++	/* If this is a 5700 BX chipset, and we are in PCI-X
++	 * mode, enable register write workaround.
++	 *
++	 * The workaround is to use indirect register accesses
++	 * for all chip writes not to mailbox registers.
++	 *
++	 * In etherboot to simplify things we just always use this work around.
++	 */
++	if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0) {
++		tp->tg3_flags |= TG3_FLAG_PCIX_MODE;
++	}
++	/* Back to back register writes can cause problems on the 5701,
++	 * the workaround is to read back all reg writes except those to
++	 * mailbox regs.
++	 * In etherboot we always use indirect register accesses so
++	 * we don't see this.
++	 */
++
++	if ((pci_state_reg & PCISTATE_BUS_SPEED_HIGH) != 0)
++		tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
++	if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
++		tp->tg3_flags |= TG3_FLAG_PCI_32BIT;
++
++	/* Chip-specific fixup from Broadcom driver */
++	if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) &&
++	    (!(pci_state_reg & PCISTATE_RETRY_SAME_DMA))) {
++		pci_state_reg |= PCISTATE_RETRY_SAME_DMA;
++		pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
++	}
++
++	/* Force the chip into D0. */
++	tg3_set_power_state_0(tp);
++
++	/* Etherboot does not ask the tg3 to do checksums */
++	/* Etherboot does not ask the tg3 to do jumbo frames */
++	/* Ehterboot does not ask the tg3 to use WakeOnLan. */
++
++	/* A few boards don't want Ethernet@WireSpeed phy feature */
++	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
++		((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
++			(tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
++			(tp->pci_chip_rev_id != CHIPREV_ID_5705_A1))) {
++		tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
++	}
++
++	/* Avoid tagged irq status etherboot does not use irqs */
++
++	/* Only 5701 and later support tagged irq status mode.
++	 * Also, 5788 chips cannot use tagged irq status.
++	 *
++	 * However, since etherboot does not use irqs avoid tagged irqs
++	 * status  because the interrupt condition is more difficult to
++	 * fully clear in that mode.
++	 */
++	
++	/* Since some 5700_AX && 5700_BX have problems with 32BYTE
++	 * coalesce_mode, and the rest work fine anything set.
++	 * Don't enable HOST_CC_MODE_32BYTE in etherboot.
++	 */
++
++	/* Initialize MAC MI mode, polling disabled. */
++	tw32_carefully(MAC_MI_MODE, tp->mi_mode);
++
++	/* Initialize data/descriptor byte/word swapping. */
++	tw32(GRC_MODE, tp->grc_mode);
++
++	tg3_switch_clocks(tp);
++
++	/* Clear this out for sanity. */
++	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
++
++	/* Etherboot does not need to check if the PCIX_TARGET_HWBUG
++	 * is needed.  It always uses it.
++	 */
++	
++	udelay(50);
++	tg3_nvram_init(tp);
++
++	/* The TX descriptors will reside in main memory.
++	 */
++
++	/* See which board we are using.
++	 */
++	grc_misc_cfg = tr32(GRC_MISC_CFG);
++	grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK;
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
++	    grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5704CIOBE) {
++		tp->tg3_flags |= TG3_FLAG_SPLIT_MODE;
++		tp->split_mode_max_reqs = SPLIT_MODE_5704_MAX_REQ;
++	}
++
++	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
++	    (grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||
++	     grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
++		tp->tg3_flags2 |= TG3_FLG2_IS_5788;
++
++	/* these are limited to 10/100 only */
++	if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) &&
++		    ((grc_misc_cfg == 0x8000) || (grc_misc_cfg == 0x4000))) ||
++		((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
++			(tp->pdev->vendor == PCI_VENDOR_ID_BROADCOM) &&
++			((tp->pdev->dev_id == PCI_DEVICE_ID_TIGON3_5901) ||
++				(tp->pdev->dev_id == PCI_DEVICE_ID_TIGON3_5901_2)))) {
++		tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
++	}
++
++	err = tg3_phy_probe(tp);
++	if (err) {
++		printf("phy probe failed, err %d\n", err);
++	}
++
++	tg3_read_partno(tp);
++
++
++	/* 5700 BX chips need to have their TX producer index mailboxes
++	 * written twice to workaround a bug.
++	 * In etherboot we do this unconditionally to simplify things.
++	 */
++
++	/* 5700 chips can get confused if TX buffers straddle the
++	 * 4GB address boundary in some cases.
++	 * 
++	 * In etherboot we can ignore the problem as etherboot lives below 4GB.
++	 */
++
++	/* In etherboot wake-on-lan is unconditionally disabled */
++	return err;
++}
++
++static int  tg3_get_device_address(struct tg3 *tp)
++{
++	struct nic *nic = tp->nic;
++	uint32_t hi, lo, mac_offset;
++
++	if (PCI_FUNC(tp->pdev->devfn) == 0)
++		mac_offset = 0x7c;
++	else
++		mac_offset = 0xcc;
++
++	/* First try to get it from MAC address mailbox. */
++	tg3_read_mem(NIC_SRAM_MAC_ADDR_HIGH_MBOX, &hi);
++	if ((hi >> 16) == 0x484b) {
++		nic->node_addr[0] = (hi >>  8) & 0xff;
++		nic->node_addr[1] = (hi >>  0) & 0xff;
++
++		tg3_read_mem(NIC_SRAM_MAC_ADDR_LOW_MBOX, &lo);
++		nic->node_addr[2] = (lo >> 24) & 0xff;
++		nic->node_addr[3] = (lo >> 16) & 0xff;
++		nic->node_addr[4] = (lo >>  8) & 0xff;
++		nic->node_addr[5] = (lo >>  0) & 0xff;
++	}
++	/* Next, try NVRAM. */
++	else if (!tg3_nvram_read(tp, mac_offset + 0, &hi) &&
++		 !tg3_nvram_read(tp, mac_offset + 4, &lo)) {
++		nic->node_addr[0] = ((hi >> 16) & 0xff);
++		nic->node_addr[1] = ((hi >> 24) & 0xff);
++		nic->node_addr[2] = ((lo >>  0) & 0xff);
++		nic->node_addr[3] = ((lo >>  8) & 0xff);
++		nic->node_addr[4] = ((lo >> 16) & 0xff);
++		nic->node_addr[5] = ((lo >> 24) & 0xff);
++	}
++	/* Finally just fetch it out of the MAC control regs. */
++	else {
++		hi = tr32(MAC_ADDR_0_HIGH);
++		lo = tr32(MAC_ADDR_0_LOW);
++
++		nic->node_addr[5] = lo & 0xff;
++		nic->node_addr[4] = (lo >> 8) & 0xff;
++		nic->node_addr[3] = (lo >> 16) & 0xff;
++		nic->node_addr[2] = (lo >> 24) & 0xff;
++		nic->node_addr[1] = hi & 0xff;
++		nic->node_addr[0] = (hi >> 8) & 0xff;
++	}
++
++	return 0;
++}
++
++
++static int tg3_setup_dma(struct tg3 *tp)
++{
++	tw32(TG3PCI_CLOCK_CTRL, 0);
++
++	if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) == 0) {
++		tp->dma_rwctrl =
++			(0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
++			(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT) |
++			(0x7 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
++			(0x7 << DMA_RWCTRL_READ_WATER_SHIFT) |
++			(0x0f << DMA_RWCTRL_MIN_DMA_SHIFT);
++		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
++			tp->dma_rwctrl &= ~(DMA_RWCTRL_MIN_DMA << DMA_RWCTRL_MIN_DMA_SHIFT);
++		}
++	} else {
++		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
++			tp->dma_rwctrl =
++				(0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
++				(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT) |
++				(0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
++				(0x7 << DMA_RWCTRL_READ_WATER_SHIFT) |
++				(0x00 << DMA_RWCTRL_MIN_DMA_SHIFT);
++		else
++			tp->dma_rwctrl =
++				(0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
++				(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT) |
++				(0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
++				(0x3 << DMA_RWCTRL_READ_WATER_SHIFT) |
++				(0x0f << DMA_RWCTRL_MIN_DMA_SHIFT);
++
++		/* Wheee, some more chip bugs... */
++		if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
++			(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)) {
++			uint32_t ccval = tr32(TG3PCI_CLOCK_CTRL) & 0x1f;
++
++			if ((ccval == 0x6) || (ccval == 0x7)) {
++				tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
++			}
++		}
++	}
++
++	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
++		(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)) {
++		tp->dma_rwctrl &= ~(DMA_RWCTRL_MIN_DMA << DMA_RWCTRL_MIN_DMA_SHIFT);
++	}
++
++	tp->dma_rwctrl |= DMA_RWCTRL_ASSERT_ALL_BE;
++
++	tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
++
++	return 0;
++}
++
++static void tg3_init_link_config(struct tg3 *tp)
++{
++	tp->link_config.advertising =
++		(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
++		 ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
++		 ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full |
++		 ADVERTISED_Autoneg | ADVERTISED_MII);
++	tp->carrier_ok = 0;
++	tp->link_config.active_speed = SPEED_INVALID;
++	tp->link_config.active_duplex = DUPLEX_INVALID;
++}
++
++
++#if SUPPORT_PHY_STR
++static const char * tg3_phy_string(struct tg3 *tp)
++{
++	switch (tp->phy_id & PHY_ID_MASK) {
++	case PHY_ID_BCM5400:	return "5400";
++	case PHY_ID_BCM5401:	return "5401";
++	case PHY_ID_BCM5411:	return "5411";
++	case PHY_ID_BCM5701:	return "5701";
++	case PHY_ID_BCM5703:	return "5703";
++	case PHY_ID_BCM5704:	return "5704";
++	case PHY_ID_BCM8002:	return "8002";
++	case PHY_ID_SERDES:	return "serdes";
++	default:		return "unknown";
++	};
++}
++#else
++#define tg3_phy_string(TP) "?"
++#endif
++
++
++static void tg3_poll_link(struct tg3 *tp)
++{
++	uint32_t mac_stat;
++
++	mac_stat = tr32(MAC_STATUS);
++	if (tp->phy_id == PHY_ID_SERDES) {
++		if (tp->carrier_ok?
++			(mac_stat & MAC_STATUS_LNKSTATE_CHANGED):
++			(mac_stat & MAC_STATUS_PCS_SYNCED)) {
++			tw32_carefully(MAC_MODE, tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK);
++			tw32_carefully(MAC_MODE, tp->mac_mode);
++
++			tg3_setup_phy(tp);
++		}
++	}
++	else {
++		if (mac_stat & MAC_STATUS_LNKSTATE_CHANGED) {
++			tg3_setup_phy(tp);
++		}
++	}
++}
++
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static void tg3_ack_irqs(struct tg3 *tp)
++{
++	if (tp->hw_status->status & SD_STATUS_UPDATED) {
++		/*
++		 * writing any value to intr-mbox-0 clears PCI INTA# and
++		 * chip-internal interrupt pending events.
++		 * writing non-zero to intr-mbox-0 additional tells the
++		 * NIC to stop sending us irqs, engaging "in-intr-handler"
++		 * event coalescing.
++		 */
++		tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 
++			0x00000001);
++		/*
++		 * Flush PCI write.  This also guarantees that our
++		 * status block has been flushed to host memory.
++		 */
++		tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
++		tp->hw_status->status &= ~SD_STATUS_UPDATED;
++	}
++}
++
++static int tg3_poll(struct nic *nic, int retrieve)
++{
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++
++	struct tg3 *tp = &tg3;
++	int result;
++
++	result = 0;
++
++	if ( (tp->hw_status->idx[0].rx_producer != tp->rx_rcb_ptr) && !retrieve ) 
++	  return 1;
++
++	tg3_ack_irqs(tp);
++
++	if (tp->hw_status->idx[0].rx_producer != tp->rx_rcb_ptr) {
++		struct tg3_rx_buffer_desc *desc;
++		unsigned int len;
++		desc = &tp->rx_rcb[tp->rx_rcb_ptr];
++		if ((desc->opaque & RXD_OPAQUE_RING_MASK) == RXD_OPAQUE_RING_STD) {
++			len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; /* omit crc */
++			
++			nic->packetlen = len;
++			memcpy(nic->packet, bus_to_virt(desc->addr_lo), len);
++			result = 1;
++		}
++		tp->rx_rcb_ptr = (tp->rx_rcb_ptr + 1) % TG3_RX_RCB_RING_SIZE;
++		
++		/* ACK the status ring */
++		tw32_mailbox2(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, tp->rx_rcb_ptr);
++
++		/* Refill RX ring. */
++		if (result) {
++			tp->rx_std_ptr = (tp->rx_std_ptr + 1) % TG3_RX_RING_SIZE;
++			tw32_mailbox2(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW, tp->rx_std_ptr);
++		}
++	}
++	tg3_poll_link(tp);
++	return result;
++}
++
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++#if 0
++static void tg3_set_txd(struct tg3 *tp, int entry,
++	dma_addr_t mapping, int len, uint32_t flags,
++	uint32_t mss_and_is_end)
++{
++	struct tg3_tx_buffer_desc *txd =  &tp->tx_ring[entry];
++	int is_end = (mss_and_is_end & 0x1);
++	if (is_end) {
++		flags |= TXD_FLAG_END;
++	}
++
++	txd->addr_hi   = 0;
++	txd->addr_lo   = mapping & 0xffffffff;
++	txd->len_flags = (len << TXD_LEN_SHIFT) | flags;
++	txd->vlan_tag  = 0 << TXD_VLAN_TAG_SHIFT;
++}
++#endif
++
++static void tg3_transmit(struct nic *nic, const char *dst_addr,
++	unsigned int type, unsigned int size, const char *packet)
++{
++	static struct eth_frame {
++		uint8_t  dst_addr[ETH_ALEN];
++		uint8_t  src_addr[ETH_ALEN];
++		uint16_t type;
++		uint8_t  data [ETH_FRAME_LEN - ETH_HLEN];
++	} frame[2];
++	static int frame_idx;
++	
++	/* send the packet to destination */
++	struct tg3_tx_buffer_desc *txd;
++	struct tg3 *tp;
++	uint32_t entry;
++	int i;
++
++	/* Wait until there is a free packet frame */
++	tp = &tg3;
++	i = 0;
++	entry = tp->tx_prod;
++	while((tp->hw_status->idx[0].tx_consumer != entry) &&
++		(tp->hw_status->idx[0].tx_consumer != PREV_TX(entry))) {
++		mdelay(10);	/* give the nick a chance */
++		poll_interruptions();
++		if (++i > 500) { /* timeout 5s for transmit */
++			printf("transmit timed out\n");
++			tg3_halt(tp);
++			tg3_setup_hw(tp);
++			return;
++		}
++	}
++	if (i != 0) {
++		printf("#");
++	}
++	
++	/* Copy the packet to the our local buffer */
++	memcpy(&frame[frame_idx].dst_addr, dst_addr, ETH_ALEN);
++	memcpy(&frame[frame_idx].src_addr, nic->node_addr, ETH_ALEN);
++	frame[frame_idx].type = htons(type);
++	memset(&frame[frame_idx].data, 0, sizeof(frame[frame_idx].data));
++	memcpy(&frame[frame_idx].data, packet, size);
++
++	/* Setup the ring buffer entry to transmit */
++	txd            = &tp->tx_ring[entry];
++	txd->addr_hi   = 0; /* Etherboot runs under 4GB */
++	txd->addr_lo   = virt_to_bus(&frame[frame_idx]);
++	txd->len_flags = ((size + ETH_HLEN) << TXD_LEN_SHIFT) | TXD_FLAG_END;
++	txd->vlan_tag  = 0 << TXD_VLAN_TAG_SHIFT;
++
++	/* Advance to the next entry */
++	entry = NEXT_TX(entry);
++	frame_idx ^= 1;
++
++	/* Packets are ready, update Tx producer idx local and on card */
++	tw32_mailbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
++	tw32_mailbox2((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
++	tp->tx_prod = entry;
++}
++
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++static void tg3_disable(struct dev *dev __unused)
++{
++	struct tg3 *tp = &tg3;
++	/* put the card in its initial state */
++	/* This function serves 3 purposes.
++	 * This disables DMA and interrupts so we don't receive
++	 *  unexpected packets or interrupts from the card after
++	 *  etherboot has finished. 
++	 * This frees resources so etherboot may use
++	 *  this driver on another interface
++	 * This allows etherboot to reinitialize the interface
++	 *  if something is something goes wrong.
++	 */
++	tg3_halt(tp);
++	tp->tg3_flags &= ~(TG3_FLAG_INIT_COMPLETE|TG3_FLAG_GOT_SERDES_FLOWCTL);
++	tp->carrier_ok = 0;
++	iounmap((void *)tp->regs);
++}
++
++/**************************************************************************
++IRQ - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void tg3_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++You should omit the last argument struct pci_device * for a non-PCI NIC
++***************************************************************************/
++static int tg3_probe(struct dev *dev, struct pci_device *pdev)
++{
++	struct nic *nic = (struct nic *)dev;
++	struct tg3 *tp = &tg3;
++	unsigned long tg3reg_base, tg3reg_len;
++	int i, err, pm_cap;
++
++	if (pdev == 0)
++		return 0;
++
++	memset(tp, 0, sizeof(*tp));
++
++	adjust_pci_device(pdev);
++
++	nic->irqno  = 0;
++	nic->ioaddr = pdev->ioaddr & ~3;
++
++	/* Find power-management capability. */
++	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
++	if (pm_cap == 0) {
++		printf("Cannot find PowerManagement capability, aborting.\n");
++		return 0;
++	}
++	tg3reg_base = pci_bar_start(pdev, PCI_BASE_ADDRESS_0);
++	if (tg3reg_base == -1UL) {
++		printf("Unuseable bar\n");
++		return 0;
++	}
++	tg3reg_len  = pci_bar_size(pdev,  PCI_BASE_ADDRESS_0);
++
++	tp->pdev       = pdev;
++	tp->nic        = nic;
++	tp->pm_cap     = pm_cap;
++	tp->rx_mode    = 0;
++	tp->tx_mode    = 0;
++	tp->mi_mode    = MAC_MI_MODE_BASE;
++	tp->tg3_flags  = 0 & ~TG3_FLAG_INIT_COMPLETE; 
++	
++	/* The word/byte swap controls here control register access byte
++	 * swapping.  DMA data byte swapping is controlled in the GRC_MODE
++	 * setting below.
++	 */
++	tp->misc_host_ctrl =
++		MISC_HOST_CTRL_MASK_PCI_INT |
++		MISC_HOST_CTRL_WORD_SWAP |
++		MISC_HOST_CTRL_INDIR_ACCESS |
++		MISC_HOST_CTRL_PCISTATE_RW;
++
++	/* The NONFRM (non-frame) byte/word swap controls take effect
++	 * on descriptor entries, anything which isn't packet data.
++	 *
++	 * The StrongARM chips on the board (one for tx, one for rx)
++	 * are running in big-endian mode.
++	 */
++	tp->grc_mode = (GRC_MODE_WSWAP_DATA | GRC_MODE_BSWAP_DATA |
++			GRC_MODE_WSWAP_NONFRM_DATA);
++#if __BYTE_ORDER == __BIG_ENDIAN
++	tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA;
++#endif
++	tp->regs = (unsigned long) ioremap(tg3reg_base, tg3reg_len);
++	if (tp->regs == 0UL) {
++		printf("Cannot map device registers, aborting\n");
++		return 0;
++	}
++
++	tg3_init_link_config(tp);
++
++	err = tg3_get_invariants(tp);
++	if (err) {
++		printf("Problem fetching invariants of chip, aborting.\n");
++		goto err_out_iounmap;
++	}
++
++	err = tg3_get_device_address(tp);
++	if (err) {
++		printf("Could not obtain valid ethernet address, aborting.\n");
++		goto err_out_iounmap;
++	}
++	printf("Ethernet addr: %!\n", nic->node_addr);
++
++	tg3_setup_dma(tp);
++
++	/* Now that we have fully setup the chip, save away a snapshot
++	 * of the PCI config space.  We need to restore this after
++	 * GRC_MISC_CFG core clock resets and some resume events.
++	 */
++	pci_save_state(tp->pdev, tp->pci_cfg_state);
++
++	printf("Tigon3 [partno(%s) rev %hx PHY(%s)] (PCI%s:%s:%s)\n",
++		tp->board_part_number,
++		tp->pci_chip_rev_id,
++		tg3_phy_string(tp),
++		((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "X" : ""),
++		((tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED) ?
++			((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "133MHz" : "66MHz") :
++			((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "100MHz" : "33MHz")),
++		((tp->tg3_flags & TG3_FLAG_PCI_32BIT) ? "32-bit" : "64-bit"));
++
++
++	err = tg3_setup_hw(tp); 
++	if (err) {
++		goto err_out_disable;
++	} 
++	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
++
++	/* Wait for a reasonable time for the link to come up */
++	tg3_poll_link(tp);
++	for(i = 0; !tp->carrier_ok && (i < VALID_LINK_TIMEOUT*100); i++) {
++		mdelay(1);
++		tg3_poll_link(tp);
++	}
++	if (!tp->carrier_ok){
++		printf("Valid link not established\n");
++		goto err_out_disable;
++	}
++
++	dev->disable  = tg3_disable;
++	nic->poll     = tg3_poll;
++	nic->transmit = tg3_transmit;
++	nic->irq      = tg3_irq;
++
++	return 1;
++
++ err_out_iounmap:
++	iounmap((void *)tp->regs);
++	return 0;
++ err_out_disable:
++	tg3_disable(dev);
++	return 0;
++}
++
++static struct pci_id tg3_nics[] = {
++PCI_ROM(0x14e4, 0x1644, "tg3-5700",        "Broadcom Tigon 3 5700"),
++PCI_ROM(0x14e4, 0x1645, "tg3-5701",        "Broadcom Tigon 3 5701"),
++PCI_ROM(0x14e4, 0x1646, "tg3-5702",        "Broadcom Tigon 3 5702"),
++PCI_ROM(0x14e4, 0x1647, "tg3-5703",        "Broadcom Tigon 3 5703"),
++PCI_ROM(0x14e4, 0x1648, "tg3-5704",        "Broadcom Tigon 3 5704"),
++PCI_ROM(0x14e4, 0x164d, "tg3-5702FE",      "Broadcom Tigon 3 5702FE"),
++PCI_ROM(0x14e4, 0x1653, "tg3-5705",        "Broadcom Tigon 3 5705"),
++PCI_ROM(0x14e4, 0x1654, "tg3-5705_2",      "Broadcom Tigon 3 5705_2"),
++PCI_ROM(0x14e4, 0x165d, "tg3-5705M",       "Broadcom Tigon 3 5705M"),
++PCI_ROM(0x14e4, 0x165e, "tg3-5705M_2",     "Broadcom Tigon 3 5705M_2"),
++PCI_ROM(0x14e4, 0x1696, "tg3-5782",        "Broadcom Tigon 3 5782"),
++PCI_ROM(0x14e4, 0x169c, "tg3-5788",        "Broadcom Tigon 3 5788"),
++PCI_ROM(0x14e4, 0x16a6, "tg3-5702X",       "Broadcom Tigon 3 5702X"),
++PCI_ROM(0x14e4, 0x16a7, "tg3-5703X",       "Broadcom Tigon 3 5703X"),
++PCI_ROM(0x14e4, 0x16a8, "tg3-5704S",       "Broadcom Tigon 3 5704S"),
++PCI_ROM(0x14e4, 0x16c6, "tg3-5702A3",      "Broadcom Tigon 3 5702A3"),
++PCI_ROM(0x14e4, 0x16c7, "tg3-5703A3",      "Broadcom Tigon 3 5703A3"),
++PCI_ROM(0x14e4, 0x170d, "tg3-5901",        "Broadcom Tigon 3 5901"),
++PCI_ROM(0x14e4, 0x170e, "tg3-5901_2",      "Broadcom Tigon 3 5901_2"),
++PCI_ROM(0x1148, 0x4400, "tg3-9DXX",        "Syskonnect 9DXX"),
++PCI_ROM(0x1148, 0x4500, "tg3-9MXX",        "Syskonnect 9MXX"),
++PCI_ROM(0x173b, 0x03e8, "tg3-ac1000",      "Altima AC1000"),
++PCI_ROM(0x173b, 0x03e9, "tg3-ac1001",      "Altima AC1001"),
++PCI_ROM(0x173b, 0x03ea, "tg3-ac9100",      "Altima AC9100"),
++PCI_ROM(0x173b, 0x03eb, "tg3-ac1003",      "Altima AC1003"),
++};
++
++struct pci_driver tg3_driver = {
++	.type	  = NIC_DRIVER,
++	.name	  = "TG3",
++	.probe	  = tg3_probe,
++	.ids	  = tg3_nics,
++	.id_count = sizeof(tg3_nics)/sizeof(tg3_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/tg3.h grub-0.97/netboot/tg3.h
+--- grub-0.97.orig/netboot/tg3.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/tg3.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,2203 @@
++/* $Id: grub-0.95-diskless-patch-2.patch,v 1.1.1.1 2005/06/14 08:18:50 wesolows Exp $
++ * tg3.h: Definitions for Broadcom Tigon3 ethernet driver.
++ *
++ * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)
++ * Copyright (C) 2001 Jeff Garzik (jgarzik@mandrakesoft.com)
++ */
++
++#ifndef _T3_H
++#define _T3_H
++
++#include "stdint.h"
++
++typedef unsigned long dma_addr_t;
++
++/* From mii.h */
++
++/* Indicates what features are advertised by the interface. */
++#define ADVERTISED_10baseT_Half		(1 << 0)
++#define ADVERTISED_10baseT_Full		(1 << 1)
++#define ADVERTISED_100baseT_Half	(1 << 2)
++#define ADVERTISED_100baseT_Full	(1 << 3)
++#define ADVERTISED_1000baseT_Half	(1 << 4)
++#define ADVERTISED_1000baseT_Full	(1 << 5)
++#define ADVERTISED_Autoneg		(1 << 6)
++#define ADVERTISED_TP			(1 << 7)
++#define ADVERTISED_AUI			(1 << 8)
++#define ADVERTISED_MII			(1 << 9)
++#define ADVERTISED_FIBRE		(1 << 10)
++#define ADVERTISED_BNC			(1 << 11)
++
++/* The following are all involved in forcing a particular link
++ * mode for the device for setting things.  When getting the
++ * devices settings, these indicate the current mode and whether
++ * it was foced up into this mode or autonegotiated.
++ */
++
++/* The forced speed, 10Mb, 100Mb, gigabit. */
++#define SPEED_10		0
++#define SPEED_100		1
++#define SPEED_1000		2
++#define SPEED_INVALID           3
++
++
++/* Duplex, half or full. */
++#define DUPLEX_HALF		0x00
++#define DUPLEX_FULL		0x01
++#define DUPLEX_INVALID          0x02
++
++/* Which connector port. */
++#define PORT_TP			0x00
++#define PORT_AUI		0x01
++#define PORT_MII		0x02
++#define PORT_FIBRE		0x03
++#define PORT_BNC		0x04
++
++/* Which tranceiver to use. */
++#define XCVR_INTERNAL		0x00
++#define XCVR_EXTERNAL		0x01
++#define XCVR_DUMMY1		0x02
++#define XCVR_DUMMY2		0x03
++#define XCVR_DUMMY3		0x04
++
++/* Enable or disable autonegotiation.  If this is set to enable,
++ * the forced link modes above are completely ignored.
++ */
++#define AUTONEG_DISABLE		0x00
++#define AUTONEG_ENABLE		0x01
++
++/* Wake-On-Lan options. */
++#define WAKE_PHY		(1 << 0)
++#define WAKE_UCAST		(1 << 1)
++#define WAKE_MCAST		(1 << 2)
++#define WAKE_BCAST		(1 << 3)
++#define WAKE_ARP		(1 << 4)
++#define WAKE_MAGIC		(1 << 5)
++#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
++
++/* Generic MII registers. */
++
++#define MII_BMCR            0x00        /* Basic mode control register */
++#define MII_BMSR            0x01        /* Basic mode status register  */
++#define MII_PHYSID1         0x02        /* PHYS ID 1                   */
++#define MII_PHYSID2         0x03        /* PHYS ID 2                   */
++#define MII_ADVERTISE       0x04        /* Advertisement control reg   */
++#define MII_LPA             0x05        /* Link partner ability reg    */
++#define MII_EXPANSION       0x06        /* Expansion register          */
++#define MII_DCOUNTER        0x12        /* Disconnect counter          */
++#define MII_FCSCOUNTER      0x13        /* False carrier counter       */
++#define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
++#define MII_RERRCOUNTER     0x15        /* Receive error counter       */
++#define MII_SREVISION       0x16        /* Silicon revision            */
++#define MII_RESV1           0x17        /* Reserved...                 */
++#define MII_LBRERROR        0x18        /* Lpback, rx, bypass error    */
++#define MII_PHYADDR         0x19        /* PHY address                 */
++#define MII_RESV2           0x1a        /* Reserved...                 */
++#define MII_TPISTATUS       0x1b        /* TPI status for 10mbps       */
++#define MII_NCONFIG         0x1c        /* Network interface config    */
++
++/* Basic mode control register. */
++#define BMCR_RESV               0x007f  /* Unused...                   */
++#define BMCR_CTST               0x0080  /* Collision test              */
++#define BMCR_FULLDPLX           0x0100  /* Full duplex                 */
++#define BMCR_ANRESTART          0x0200  /* Auto negotiation restart    */
++#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
++#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
++#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
++#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
++#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
++#define BMCR_RESET              0x8000  /* Reset the DP83840           */
++
++/* Basic mode status register. */
++#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
++#define BMSR_JCD                0x0002  /* Jabber detected             */
++#define BMSR_LSTATUS            0x0004  /* Link status                 */
++#define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
++#define BMSR_RFAULT             0x0010  /* Remote fault detected       */
++#define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
++#define BMSR_RESV               0x07c0  /* Unused...                   */
++#define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
++#define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
++#define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
++#define BMSR_100FULL            0x4000  /* Can do 100mbps, full-duplex */
++#define BMSR_100BASE4           0x8000  /* Can do 100mbps, 4k packets  */
++
++/* Advertisement control register. */
++#define ADVERTISE_SLCT          0x001f  /* Selector bits               */
++#define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
++#define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
++#define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
++#define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
++#define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */
++#define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
++#define ADVERTISE_RESV          0x1c00  /* Unused...                   */
++#define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
++#define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
++#define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
++
++#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
++			ADVERTISE_CSMA)
++#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
++                       ADVERTISE_100HALF | ADVERTISE_100FULL)
++
++/* Link partner ability register. */
++#define LPA_SLCT                0x001f  /* Same as advertise selector  */
++#define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
++#define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
++#define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
++#define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
++#define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
++#define LPA_RESV                0x1c00  /* Unused...                   */
++#define LPA_RFAULT              0x2000  /* Link partner faulted        */
++#define LPA_LPACK               0x4000  /* Link partner acked us       */
++#define LPA_NPAGE               0x8000  /* Next page bit               */
++
++#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
++#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
++
++/* Expansion register for auto-negotiation. */
++#define EXPANSION_NWAY          0x0001  /* Can do N-way auto-nego      */
++#define EXPANSION_LCWP          0x0002  /* Got new RX page code word   */
++#define EXPANSION_ENABLENPAGE   0x0004  /* This enables npage words    */
++#define EXPANSION_NPCAPABLE     0x0008  /* Link partner supports npage */
++#define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
++#define EXPANSION_RESV          0xffe0  /* Unused...                   */
++
++/* N-way test register. */
++#define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
++#define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
++#define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
++
++
++/* From tg3.h */
++
++#define TG3_64BIT_REG_HIGH		0x00UL
++#define TG3_64BIT_REG_LOW		0x04UL
++
++/* Descriptor block info. */
++#define TG3_BDINFO_HOST_ADDR		0x0UL /* 64-bit */
++#define TG3_BDINFO_MAXLEN_FLAGS		0x8UL /* 32-bit */
++#define  BDINFO_FLAGS_USE_EXT_RECV	 0x00000001 /* ext rx_buffer_desc */
++#define  BDINFO_FLAGS_DISABLED		 0x00000002
++#define  BDINFO_FLAGS_MAXLEN_MASK	 0xffff0000
++#define  BDINFO_FLAGS_MAXLEN_SHIFT	 16
++#define TG3_BDINFO_NIC_ADDR		0xcUL /* 32-bit */
++#define TG3_BDINFO_SIZE			0x10UL
++
++#define RX_COPY_THRESHOLD  		256
++
++#define RX_STD_MAX_SIZE			1536
++#define RX_STD_MAX_SIZE_5705		512
++#define RX_JUMBO_MAX_SIZE		0xdeadbeef /* XXX */
++
++/* First 256 bytes are a mirror of PCI config space. */
++#define TG3PCI_VENDOR			0x00000000
++#define  TG3PCI_VENDOR_BROADCOM		 0x14e4
++#define TG3PCI_DEVICE			0x00000002
++#define  TG3PCI_DEVICE_TIGON3_1		 0x1644 /* BCM5700 */
++#define  TG3PCI_DEVICE_TIGON3_2		 0x1645 /* BCM5701 */
++#define  TG3PCI_DEVICE_TIGON3_3		 0x1646 /* BCM5702 */
++#define  TG3PCI_DEVICE_TIGON3_4		 0x1647 /* BCM5703 */
++#define TG3PCI_COMMAND			0x00000004
++#define TG3PCI_STATUS			0x00000006
++#define TG3PCI_CCREVID			0x00000008
++#define TG3PCI_CACHELINESZ		0x0000000c
++#define TG3PCI_LATTIMER			0x0000000d
++#define TG3PCI_HEADERTYPE		0x0000000e
++#define TG3PCI_BIST			0x0000000f
++#define TG3PCI_BASE0_LOW		0x00000010
++#define TG3PCI_BASE0_HIGH		0x00000014
++/* 0x18 --> 0x2c unused */
++#define TG3PCI_SUBSYSVENID		0x0000002c
++#define TG3PCI_SUBSYSID			0x0000002e
++#define TG3PCI_ROMADDR			0x00000030
++#define TG3PCI_CAPLIST			0x00000034
++/* 0x35 --> 0x3c unused */
++#define TG3PCI_IRQ_LINE			0x0000003c
++#define TG3PCI_IRQ_PIN			0x0000003d
++#define TG3PCI_MIN_GNT			0x0000003e
++#define TG3PCI_MAX_LAT			0x0000003f
++#define TG3PCI_X_CAPS			0x00000040
++#define  PCIX_CAPS_RELAXED_ORDERING	 0x00020000
++#define  PCIX_CAPS_SPLIT_MASK		 0x00700000
++#define  PCIX_CAPS_SPLIT_SHIFT		 20
++#define  PCIX_CAPS_BURST_MASK		 0x000c0000
++#define  PCIX_CAPS_BURST_SHIFT		 18
++#define  PCIX_CAPS_MAX_BURST_CPIOB	 2
++#define TG3PCI_PM_CAP_PTR		0x00000041
++#define TG3PCI_X_COMMAND		0x00000042
++#define TG3PCI_X_STATUS			0x00000044
++#define TG3PCI_PM_CAP_ID		0x00000048
++#define TG3PCI_VPD_CAP_PTR		0x00000049
++#define TG3PCI_PM_CAPS			0x0000004a
++#define TG3PCI_PM_CTRL_STAT		0x0000004c
++#define TG3PCI_BR_SUPP_EXT		0x0000004e
++#define TG3PCI_PM_DATA			0x0000004f
++#define TG3PCI_VPD_CAP_ID		0x00000050
++#define TG3PCI_MSI_CAP_PTR		0x00000051
++#define TG3PCI_VPD_ADDR_FLAG		0x00000052
++#define  VPD_ADDR_FLAG_WRITE		0x00008000
++#define TG3PCI_VPD_DATA			0x00000054
++#define TG3PCI_MSI_CAP_ID		0x00000058
++#define TG3PCI_NXT_CAP_PTR		0x00000059
++#define TG3PCI_MSI_CTRL			0x0000005a
++#define TG3PCI_MSI_ADDR_LOW		0x0000005c
++#define TG3PCI_MSI_ADDR_HIGH		0x00000060
++#define TG3PCI_MSI_DATA			0x00000064
++/* 0x66 --> 0x68 unused */
++#define TG3PCI_MISC_HOST_CTRL		0x00000068
++#define  MISC_HOST_CTRL_CLEAR_INT	 0x00000001
++#define  MISC_HOST_CTRL_MASK_PCI_INT	 0x00000002
++#define  MISC_HOST_CTRL_BYTE_SWAP	 0x00000004
++#define  MISC_HOST_CTRL_WORD_SWAP	 0x00000008
++#define  MISC_HOST_CTRL_PCISTATE_RW	 0x00000010
++#define  MISC_HOST_CTRL_CLKREG_RW	 0x00000020
++#define  MISC_HOST_CTRL_REGWORD_SWAP	 0x00000040
++#define  MISC_HOST_CTRL_INDIR_ACCESS	 0x00000080
++#define  MISC_HOST_CTRL_IRQ_MASK_MODE	 0x00000100
++#define  MISC_HOST_CTRL_TAGGED_STATUS	 0x00000200
++#define  MISC_HOST_CTRL_CHIPREV		 0xffff0000
++#define  MISC_HOST_CTRL_CHIPREV_SHIFT	 16
++#define  GET_CHIP_REV_ID(MISC_HOST_CTRL) \
++	 (((MISC_HOST_CTRL) & MISC_HOST_CTRL_CHIPREV) >> \
++	  MISC_HOST_CTRL_CHIPREV_SHIFT)
++#define  CHIPREV_ID_5700_A0		 0x7000
++#define  CHIPREV_ID_5700_A1		 0x7001
++#define  CHIPREV_ID_5700_B0		 0x7100
++#define  CHIPREV_ID_5700_B1		 0x7101
++#define  CHIPREV_ID_5700_B3		 0x7102
++#define  CHIPREV_ID_5700_ALTIMA		 0x7104
++#define  CHIPREV_ID_5700_C0		 0x7200
++#define  CHIPREV_ID_5701_A0		 0x0000
++#define  CHIPREV_ID_5701_B0		 0x0100
++#define  CHIPREV_ID_5701_B2		 0x0102
++#define  CHIPREV_ID_5701_B5		 0x0105
++#define  CHIPREV_ID_5703_A0		 0x1000
++#define  CHIPREV_ID_5703_A1		 0x1001
++#define  CHIPREV_ID_5703_A2		 0x1002
++#define  CHIPREV_ID_5703_A3		 0x1003
++#define  CHIPREV_ID_5704_A0		 0x2000
++#define  CHIPREV_ID_5704_A1		 0x2001
++#define  CHIPREV_ID_5704_A2		 0x2002
++#define  CHIPREV_ID_5705_A0		 0x3000
++#define  CHIPREV_ID_5705_A1		 0x3001
++#define	 CHIPREV_ID_5705_A2              0x3002
++#define  CHIPREV_ID_5705_A3              0x3003
++#define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
++#define   ASIC_REV_5700			 0x07
++#define   ASIC_REV_5701			 0x00
++#define   ASIC_REV_5703			 0x01
++#define   ASIC_REV_5704			 0x02
++#define   ASIC_REV_5705			 0x03
++#define  GET_CHIP_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 8)
++#define   CHIPREV_5700_AX		 0x70
++#define   CHIPREV_5700_BX		 0x71
++#define   CHIPREV_5700_CX		 0x72
++#define   CHIPREV_5701_AX		 0x00
++#define  GET_METAL_REV(CHIP_REV_ID)	((CHIP_REV_ID) & 0xff)
++#define   METAL_REV_A0			 0x00
++#define   METAL_REV_A1			 0x01
++#define   METAL_REV_B0			 0x00
++#define   METAL_REV_B1			 0x01
++#define   METAL_REV_B2			 0x02
++#define TG3PCI_DMA_RW_CTRL		0x0000006c
++#define  DMA_RWCTRL_MIN_DMA		 0x000000ff
++#define  DMA_RWCTRL_MIN_DMA_SHIFT	 0
++#define  DMA_RWCTRL_READ_BNDRY_MASK	 0x00000700
++#define  DMA_RWCTRL_READ_BNDRY_DISAB	 0x00000000
++#define  DMA_RWCTRL_READ_BNDRY_16	 0x00000100
++#define  DMA_RWCTRL_READ_BNDRY_32	 0x00000200
++#define  DMA_RWCTRL_READ_BNDRY_64	 0x00000300
++#define  DMA_RWCTRL_READ_BNDRY_128	 0x00000400
++#define  DMA_RWCTRL_READ_BNDRY_256	 0x00000500
++#define  DMA_RWCTRL_READ_BNDRY_512	 0x00000600
++#define  DMA_RWCTRL_READ_BNDRY_1024	 0x00000700
++#define  DMA_RWCTRL_WRITE_BNDRY_MASK	 0x00003800
++#define  DMA_RWCTRL_WRITE_BNDRY_DISAB	 0x00000000
++#define  DMA_RWCTRL_WRITE_BNDRY_16	 0x00000800
++#define  DMA_RWCTRL_WRITE_BNDRY_32	 0x00001000
++#define  DMA_RWCTRL_WRITE_BNDRY_64	 0x00001800
++#define  DMA_RWCTRL_WRITE_BNDRY_128	 0x00002000
++#define  DMA_RWCTRL_WRITE_BNDRY_256	 0x00002800
++#define  DMA_RWCTRL_WRITE_BNDRY_512	 0x00003000
++#define  DMA_RWCTRL_WRITE_BNDRY_1024	 0x00003800
++#define  DMA_RWCTRL_ONE_DMA		 0x00004000
++#define  DMA_RWCTRL_READ_WATER		 0x00070000
++#define  DMA_RWCTRL_READ_WATER_SHIFT	 16
++#define  DMA_RWCTRL_WRITE_WATER		 0x00380000
++#define  DMA_RWCTRL_WRITE_WATER_SHIFT	 19
++#define  DMA_RWCTRL_USE_MEM_READ_MULT	 0x00400000
++#define  DMA_RWCTRL_ASSERT_ALL_BE	 0x00800000
++#define  DMA_RWCTRL_PCI_READ_CMD	 0x0f000000
++#define  DMA_RWCTRL_PCI_READ_CMD_SHIFT	 24
++#define  DMA_RWCTRL_PCI_WRITE_CMD	 0xf0000000
++#define  DMA_RWCTRL_PCI_WRITE_CMD_SHIFT	 28
++#define TG3PCI_PCISTATE			0x00000070
++#define  PCISTATE_FORCE_RESET		 0x00000001
++#define  PCISTATE_INT_NOT_ACTIVE	 0x00000002
++#define  PCISTATE_CONV_PCI_MODE		 0x00000004
++#define  PCISTATE_BUS_SPEED_HIGH	 0x00000008
++#define  PCISTATE_BUS_32BIT		 0x00000010
++#define  PCISTATE_ROM_ENABLE		 0x00000020
++#define  PCISTATE_ROM_RETRY_ENABLE	 0x00000040
++#define  PCISTATE_FLAT_VIEW		 0x00000100
++#define  PCISTATE_RETRY_SAME_DMA	 0x00002000
++#define TG3PCI_CLOCK_CTRL		0x00000074
++#define  CLOCK_CTRL_CORECLK_DISABLE	 0x00000200
++#define  CLOCK_CTRL_RXCLK_DISABLE	 0x00000400
++#define  CLOCK_CTRL_TXCLK_DISABLE	 0x00000800
++#define  CLOCK_CTRL_ALTCLK		 0x00001000
++#define  CLOCK_CTRL_PWRDOWN_PLL133	 0x00008000
++#define  CLOCK_CTRL_44MHZ_CORE		 0x00040000
++#define  CLOCK_CTRL_625_CORE		 0x00100000
++#define  CLOCK_CTRL_FORCE_CLKRUN	 0x00200000
++#define  CLOCK_CTRL_CLKRUN_OENABLE	 0x00400000
++#define  CLOCK_CTRL_DELAY_PCI_GRANT	 0x80000000
++#define TG3PCI_REG_BASE_ADDR		0x00000078
++#define TG3PCI_MEM_WIN_BASE_ADDR	0x0000007c
++#define TG3PCI_REG_DATA			0x00000080
++#define TG3PCI_MEM_WIN_DATA		0x00000084
++#define TG3PCI_MODE_CTRL		0x00000088
++#define TG3PCI_MISC_CFG			0x0000008c
++#define TG3PCI_MISC_LOCAL_CTRL		0x00000090
++/* 0x94 --> 0x98 unused */
++#define TG3PCI_STD_RING_PROD_IDX	0x00000098 /* 64-bit */
++#define TG3PCI_RCV_RET_RING_CON_IDX	0x000000a0 /* 64-bit */
++#define TG3PCI_SND_PROD_IDX		0x000000a8 /* 64-bit */
++/* 0xb0 --> 0x100 unused */
++
++/* 0x100 --> 0x200 unused */
++
++/* Mailbox registers */
++#define MAILBOX_INTERRUPT_0		0x00000200 /* 64-bit */
++#define MAILBOX_INTERRUPT_1		0x00000208 /* 64-bit */
++#define MAILBOX_INTERRUPT_2		0x00000210 /* 64-bit */
++#define MAILBOX_INTERRUPT_3		0x00000218 /* 64-bit */
++#define MAILBOX_GENERAL_0		0x00000220 /* 64-bit */
++#define MAILBOX_GENERAL_1		0x00000228 /* 64-bit */
++#define MAILBOX_GENERAL_2		0x00000230 /* 64-bit */
++#define MAILBOX_GENERAL_3		0x00000238 /* 64-bit */
++#define MAILBOX_GENERAL_4		0x00000240 /* 64-bit */
++#define MAILBOX_GENERAL_5		0x00000248 /* 64-bit */
++#define MAILBOX_GENERAL_6		0x00000250 /* 64-bit */
++#define MAILBOX_GENERAL_7		0x00000258 /* 64-bit */
++#define MAILBOX_RELOAD_STAT		0x00000260 /* 64-bit */
++#define MAILBOX_RCV_STD_PROD_IDX	0x00000268 /* 64-bit */
++#define MAILBOX_RCV_JUMBO_PROD_IDX	0x00000270 /* 64-bit */
++#define MAILBOX_RCV_MINI_PROD_IDX	0x00000278 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_0	0x00000280 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_1	0x00000288 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_2	0x00000290 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_3	0x00000298 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_4	0x000002a0 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_5	0x000002a8 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_6	0x000002b0 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_7	0x000002b8 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_8	0x000002c0 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_9	0x000002c8 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_10	0x000002d0 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_11	0x000002d8 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_12	0x000002e0 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_13	0x000002e8 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_14	0x000002f0 /* 64-bit */
++#define MAILBOX_RCVRET_CON_IDX_15	0x000002f8 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_0	0x00000300 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_1	0x00000308 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_2	0x00000310 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_3	0x00000318 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_4	0x00000320 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_5	0x00000328 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_6	0x00000330 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_7	0x00000338 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_8	0x00000340 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_9	0x00000348 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_10	0x00000350 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_11	0x00000358 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_12	0x00000360 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_13	0x00000368 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_14	0x00000370 /* 64-bit */
++#define MAILBOX_SNDHOST_PROD_IDX_15	0x00000378 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_0	0x00000380 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_1	0x00000388 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_2	0x00000390 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_3	0x00000398 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_4	0x000003a0 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_5	0x000003a8 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_6	0x000003b0 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_7	0x000003b8 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_8	0x000003c0 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_9	0x000003c8 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_10	0x000003d0 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_11	0x000003d8 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_12	0x000003e0 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_13	0x000003e8 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_14	0x000003f0 /* 64-bit */
++#define MAILBOX_SNDNIC_PROD_IDX_15	0x000003f8 /* 64-bit */
++
++/* MAC control registers */
++#define MAC_MODE			0x00000400
++#define  MAC_MODE_RESET			 0x00000001
++#define  MAC_MODE_HALF_DUPLEX		 0x00000002
++#define  MAC_MODE_PORT_MODE_MASK	 0x0000000c
++#define  MAC_MODE_PORT_MODE_TBI		 0x0000000c
++#define  MAC_MODE_PORT_MODE_GMII	 0x00000008
++#define  MAC_MODE_PORT_MODE_MII		 0x00000004
++#define  MAC_MODE_PORT_MODE_NONE	 0x00000000
++#define  MAC_MODE_PORT_INT_LPBACK	 0x00000010
++#define  MAC_MODE_TAGGED_MAC_CTRL	 0x00000080
++#define  MAC_MODE_TX_BURSTING		 0x00000100
++#define  MAC_MODE_MAX_DEFER		 0x00000200
++#define  MAC_MODE_LINK_POLARITY		 0x00000400
++#define  MAC_MODE_RXSTAT_ENABLE		 0x00000800
++#define  MAC_MODE_RXSTAT_CLEAR		 0x00001000
++#define  MAC_MODE_RXSTAT_FLUSH		 0x00002000
++#define  MAC_MODE_TXSTAT_ENABLE		 0x00004000
++#define  MAC_MODE_TXSTAT_CLEAR		 0x00008000
++#define  MAC_MODE_TXSTAT_FLUSH		 0x00010000
++#define  MAC_MODE_SEND_CONFIGS		 0x00020000
++#define  MAC_MODE_MAGIC_PKT_ENABLE	 0x00040000
++#define  MAC_MODE_ACPI_ENABLE		 0x00080000
++#define  MAC_MODE_MIP_ENABLE		 0x00100000
++#define  MAC_MODE_TDE_ENABLE		 0x00200000
++#define  MAC_MODE_RDE_ENABLE		 0x00400000
++#define  MAC_MODE_FHDE_ENABLE		 0x00800000
++#define MAC_STATUS			0x00000404
++#define  MAC_STATUS_PCS_SYNCED		 0x00000001
++#define  MAC_STATUS_SIGNAL_DET		 0x00000002
++#define  MAC_STATUS_RCVD_CFG		 0x00000004
++#define  MAC_STATUS_CFG_CHANGED		 0x00000008
++#define  MAC_STATUS_SYNC_CHANGED	 0x00000010
++#define  MAC_STATUS_PORT_DEC_ERR	 0x00000400
++#define  MAC_STATUS_LNKSTATE_CHANGED	 0x00001000
++#define  MAC_STATUS_MI_COMPLETION	 0x00400000
++#define  MAC_STATUS_MI_INTERRUPT	 0x00800000
++#define  MAC_STATUS_AP_ERROR		 0x01000000
++#define  MAC_STATUS_ODI_ERROR		 0x02000000
++#define  MAC_STATUS_RXSTAT_OVERRUN	 0x04000000
++#define  MAC_STATUS_TXSTAT_OVERRUN	 0x08000000
++#define MAC_EVENT			0x00000408
++#define  MAC_EVENT_PORT_DECODE_ERR	 0x00000400
++#define  MAC_EVENT_LNKSTATE_CHANGED	 0x00001000
++#define  MAC_EVENT_MI_COMPLETION	 0x00400000
++#define  MAC_EVENT_MI_INTERRUPT		 0x00800000
++#define  MAC_EVENT_AP_ERROR		 0x01000000
++#define  MAC_EVENT_ODI_ERROR		 0x02000000
++#define  MAC_EVENT_RXSTAT_OVERRUN	 0x04000000
++#define  MAC_EVENT_TXSTAT_OVERRUN	 0x08000000
++#define MAC_LED_CTRL			0x0000040c
++#define  LED_CTRL_LNKLED_OVERRIDE	 0x00000001
++#define  LED_CTRL_1000MBPS_ON		 0x00000002
++#define  LED_CTRL_100MBPS_ON		 0x00000004
++#define  LED_CTRL_10MBPS_ON		 0x00000008
++#define  LED_CTRL_TRAFFIC_OVERRIDE	 0x00000010
++#define  LED_CTRL_TRAFFIC_BLINK		 0x00000020
++#define  LED_CTRL_TRAFFIC_LED		 0x00000040
++#define  LED_CTRL_1000MBPS_STATUS	 0x00000080
++#define  LED_CTRL_100MBPS_STATUS	 0x00000100
++#define  LED_CTRL_10MBPS_STATUS		 0x00000200
++#define  LED_CTRL_TRAFFIC_STATUS	 0x00000400
++#define  LED_CTRL_MAC_MODE		 0x00000000
++#define  LED_CTRL_PHY_MODE_1		 0x00000800
++#define  LED_CTRL_PHY_MODE_2		 0x00001000
++#define  LED_CTRL_BLINK_RATE_MASK	 0x7ff80000
++#define  LED_CTRL_BLINK_RATE_SHIFT	 19
++#define  LED_CTRL_BLINK_PER_OVERRIDE	 0x00080000
++#define  LED_CTRL_BLINK_RATE_OVERRIDE	 0x80000000
++#define MAC_ADDR_0_HIGH			0x00000410 /* upper 2 bytes */
++#define MAC_ADDR_0_LOW			0x00000414 /* lower 4 bytes */
++#define MAC_ADDR_1_HIGH			0x00000418 /* upper 2 bytes */
++#define MAC_ADDR_1_LOW			0x0000041c /* lower 4 bytes */
++#define MAC_ADDR_2_HIGH			0x00000420 /* upper 2 bytes */
++#define MAC_ADDR_2_LOW			0x00000424 /* lower 4 bytes */
++#define MAC_ADDR_3_HIGH			0x00000428 /* upper 2 bytes */
++#define MAC_ADDR_3_LOW			0x0000042c /* lower 4 bytes */
++#define MAC_ACPI_MBUF_PTR		0x00000430
++#define MAC_ACPI_LEN_OFFSET		0x00000434
++#define  ACPI_LENOFF_LEN_MASK		 0x0000ffff
++#define  ACPI_LENOFF_LEN_SHIFT		 0
++#define  ACPI_LENOFF_OFF_MASK		 0x0fff0000
++#define  ACPI_LENOFF_OFF_SHIFT		 16
++#define MAC_TX_BACKOFF_SEED		0x00000438
++#define  TX_BACKOFF_SEED_MASK		 0x000003ff
++#define MAC_RX_MTU_SIZE			0x0000043c
++#define  RX_MTU_SIZE_MASK		 0x0000ffff
++#define MAC_PCS_TEST			0x00000440
++#define  PCS_TEST_PATTERN_MASK		 0x000fffff
++#define  PCS_TEST_PATTERN_SHIFT		 0
++#define  PCS_TEST_ENABLE		 0x00100000
++#define MAC_TX_AUTO_NEG			0x00000444
++#define  TX_AUTO_NEG_MASK		 0x0000ffff
++#define  TX_AUTO_NEG_SHIFT		 0
++#define MAC_RX_AUTO_NEG			0x00000448
++#define  RX_AUTO_NEG_MASK		 0x0000ffff
++#define  RX_AUTO_NEG_SHIFT		 0
++#define MAC_MI_COM			0x0000044c
++#define  MI_COM_CMD_MASK		 0x0c000000
++#define  MI_COM_CMD_WRITE		 0x04000000
++#define  MI_COM_CMD_READ		 0x08000000
++#define  MI_COM_READ_FAILED		 0x10000000
++#define  MI_COM_START			 0x20000000
++#define  MI_COM_BUSY			 0x20000000
++#define  MI_COM_PHY_ADDR_MASK		 0x03e00000
++#define  MI_COM_PHY_ADDR_SHIFT		 21
++#define  MI_COM_REG_ADDR_MASK		 0x001f0000
++#define  MI_COM_REG_ADDR_SHIFT		 16
++#define  MI_COM_DATA_MASK		 0x0000ffff
++#define MAC_MI_STAT			0x00000450
++#define  MAC_MI_STAT_LNKSTAT_ATTN_ENAB	 0x00000001
++#define MAC_MI_MODE			0x00000454
++#define  MAC_MI_MODE_CLK_10MHZ		 0x00000001
++#define  MAC_MI_MODE_SHORT_PREAMBLE	 0x00000002
++#define  MAC_MI_MODE_AUTO_POLL		 0x00000010
++#define  MAC_MI_MODE_CORE_CLK_62MHZ	 0x00008000
++#define  MAC_MI_MODE_BASE		 0x000c0000 /* XXX magic values XXX */
++#define MAC_AUTO_POLL_STATUS		0x00000458
++#define  MAC_AUTO_POLL_ERROR		 0x00000001
++#define MAC_TX_MODE			0x0000045c
++#define  TX_MODE_RESET			 0x00000001
++#define  TX_MODE_ENABLE			 0x00000002
++#define  TX_MODE_FLOW_CTRL_ENABLE	 0x00000010
++#define  TX_MODE_BIG_BCKOFF_ENABLE	 0x00000020
++#define  TX_MODE_LONG_PAUSE_ENABLE	 0x00000040
++#define MAC_TX_STATUS			0x00000460
++#define  TX_STATUS_XOFFED		 0x00000001
++#define  TX_STATUS_SENT_XOFF		 0x00000002
++#define  TX_STATUS_SENT_XON		 0x00000004
++#define  TX_STATUS_LINK_UP		 0x00000008
++#define  TX_STATUS_ODI_UNDERRUN		 0x00000010
++#define  TX_STATUS_ODI_OVERRUN		 0x00000020
++#define MAC_TX_LENGTHS			0x00000464
++#define  TX_LENGTHS_SLOT_TIME_MASK	 0x000000ff
++#define  TX_LENGTHS_SLOT_TIME_SHIFT	 0
++#define  TX_LENGTHS_IPG_MASK		 0x00000f00
++#define  TX_LENGTHS_IPG_SHIFT		 8
++#define  TX_LENGTHS_IPG_CRS_MASK	 0x00003000
++#define  TX_LENGTHS_IPG_CRS_SHIFT	 12
++#define MAC_RX_MODE			0x00000468
++#define  RX_MODE_RESET			 0x00000001
++#define  RX_MODE_ENABLE			 0x00000002
++#define  RX_MODE_FLOW_CTRL_ENABLE	 0x00000004
++#define  RX_MODE_KEEP_MAC_CTRL		 0x00000008
++#define  RX_MODE_KEEP_PAUSE		 0x00000010
++#define  RX_MODE_ACCEPT_OVERSIZED	 0x00000020
++#define  RX_MODE_ACCEPT_RUNTS		 0x00000040
++#define  RX_MODE_LEN_CHECK		 0x00000080
++#define  RX_MODE_PROMISC		 0x00000100
++#define  RX_MODE_NO_CRC_CHECK		 0x00000200
++#define  RX_MODE_KEEP_VLAN_TAG		 0x00000400
++#define MAC_RX_STATUS			0x0000046c
++#define  RX_STATUS_REMOTE_TX_XOFFED	 0x00000001
++#define  RX_STATUS_XOFF_RCVD		 0x00000002
++#define  RX_STATUS_XON_RCVD		 0x00000004
++#define MAC_HASH_REG_0			0x00000470
++#define MAC_HASH_REG_1			0x00000474
++#define MAC_HASH_REG_2			0x00000478
++#define MAC_HASH_REG_3			0x0000047c
++#define MAC_RCV_RULE_0			0x00000480
++#define MAC_RCV_VALUE_0			0x00000484
++#define MAC_RCV_RULE_1			0x00000488
++#define MAC_RCV_VALUE_1			0x0000048c
++#define MAC_RCV_RULE_2			0x00000490
++#define MAC_RCV_VALUE_2			0x00000494
++#define MAC_RCV_RULE_3			0x00000498
++#define MAC_RCV_VALUE_3			0x0000049c
++#define MAC_RCV_RULE_4			0x000004a0
++#define MAC_RCV_VALUE_4			0x000004a4
++#define MAC_RCV_RULE_5			0x000004a8
++#define MAC_RCV_VALUE_5			0x000004ac
++#define MAC_RCV_RULE_6			0x000004b0
++#define MAC_RCV_VALUE_6			0x000004b4
++#define MAC_RCV_RULE_7			0x000004b8
++#define MAC_RCV_VALUE_7			0x000004bc
++#define MAC_RCV_RULE_8			0x000004c0
++#define MAC_RCV_VALUE_8			0x000004c4
++#define MAC_RCV_RULE_9			0x000004c8
++#define MAC_RCV_VALUE_9			0x000004cc
++#define MAC_RCV_RULE_10			0x000004d0
++#define MAC_RCV_VALUE_10		0x000004d4
++#define MAC_RCV_RULE_11			0x000004d8
++#define MAC_RCV_VALUE_11		0x000004dc
++#define MAC_RCV_RULE_12			0x000004e0
++#define MAC_RCV_VALUE_12		0x000004e4
++#define MAC_RCV_RULE_13			0x000004e8
++#define MAC_RCV_VALUE_13		0x000004ec
++#define MAC_RCV_RULE_14			0x000004f0
++#define MAC_RCV_VALUE_14		0x000004f4
++#define MAC_RCV_RULE_15			0x000004f8
++#define MAC_RCV_VALUE_15		0x000004fc
++#define  RCV_RULE_DISABLE_MASK		 0x7fffffff
++#define MAC_RCV_RULE_CFG		0x00000500
++#define  RCV_RULE_CFG_DEFAULT_CLASS	0x00000008
++#define MAC_LOW_WMARK_MAX_RX_FRAME	0x00000504
++/* 0x508 --> 0x520 unused */
++#define MAC_HASHREGU_0			0x00000520
++#define MAC_HASHREGU_1			0x00000524
++#define MAC_HASHREGU_2			0x00000528
++#define MAC_HASHREGU_3			0x0000052c
++#define MAC_EXTADDR_0_HIGH		0x00000530
++#define MAC_EXTADDR_0_LOW		0x00000534
++#define MAC_EXTADDR_1_HIGH		0x00000538
++#define MAC_EXTADDR_1_LOW		0x0000053c
++#define MAC_EXTADDR_2_HIGH		0x00000540
++#define MAC_EXTADDR_2_LOW		0x00000544
++#define MAC_EXTADDR_3_HIGH		0x00000548
++#define MAC_EXTADDR_3_LOW		0x0000054c
++#define MAC_EXTADDR_4_HIGH		0x00000550
++#define MAC_EXTADDR_4_LOW		0x00000554
++#define MAC_EXTADDR_5_HIGH		0x00000558
++#define MAC_EXTADDR_5_LOW		0x0000055c
++#define MAC_EXTADDR_6_HIGH		0x00000560
++#define MAC_EXTADDR_6_LOW		0x00000564
++#define MAC_EXTADDR_7_HIGH		0x00000568
++#define MAC_EXTADDR_7_LOW		0x0000056c
++#define MAC_EXTADDR_8_HIGH		0x00000570
++#define MAC_EXTADDR_8_LOW		0x00000574
++#define MAC_EXTADDR_9_HIGH		0x00000578
++#define MAC_EXTADDR_9_LOW		0x0000057c
++#define MAC_EXTADDR_10_HIGH		0x00000580
++#define MAC_EXTADDR_10_LOW		0x00000584
++#define MAC_EXTADDR_11_HIGH		0x00000588
++#define MAC_EXTADDR_11_LOW		0x0000058c
++#define MAC_SERDES_CFG			0x00000590
++#define MAC_SERDES_STAT			0x00000594
++/* 0x598 --> 0x600 unused */
++#define MAC_TX_MAC_STATE_BASE		0x00000600 /* 16 bytes */
++#define MAC_RX_MAC_STATE_BASE		0x00000610 /* 20 bytes */
++/* 0x624 --> 0x800 unused */
++#define MAC_TX_STATS_OCTETS		0x00000800
++#define MAC_TX_STATS_RESV1		0x00000804
++#define MAC_TX_STATS_COLLISIONS		0x00000808
++#define MAC_TX_STATS_XON_SENT		0x0000080c
++#define MAC_TX_STATS_XOFF_SENT		0x00000810
++#define MAC_TX_STATS_RESV2		0x00000814
++#define MAC_TX_STATS_MAC_ERRORS		0x00000818
++#define MAC_TX_STATS_SINGLE_COLLISIONS	0x0000081c
++#define MAC_TX_STATS_MULT_COLLISIONS	0x00000820
++#define MAC_TX_STATS_DEFERRED		0x00000824
++#define MAC_TX_STATS_RESV3		0x00000828
++#define MAC_TX_STATS_EXCESSIVE_COL	0x0000082c
++#define MAC_TX_STATS_LATE_COL		0x00000830
++#define MAC_TX_STATS_RESV4_1		0x00000834
++#define MAC_TX_STATS_RESV4_2		0x00000838
++#define MAC_TX_STATS_RESV4_3		0x0000083c
++#define MAC_TX_STATS_RESV4_4		0x00000840
++#define MAC_TX_STATS_RESV4_5		0x00000844
++#define MAC_TX_STATS_RESV4_6		0x00000848
++#define MAC_TX_STATS_RESV4_7		0x0000084c
++#define MAC_TX_STATS_RESV4_8		0x00000850
++#define MAC_TX_STATS_RESV4_9		0x00000854
++#define MAC_TX_STATS_RESV4_10		0x00000858
++#define MAC_TX_STATS_RESV4_11		0x0000085c
++#define MAC_TX_STATS_RESV4_12		0x00000860
++#define MAC_TX_STATS_RESV4_13		0x00000864
++#define MAC_TX_STATS_RESV4_14		0x00000868
++#define MAC_TX_STATS_UCAST		0x0000086c
++#define MAC_TX_STATS_MCAST		0x00000870
++#define MAC_TX_STATS_BCAST		0x00000874
++#define MAC_TX_STATS_RESV5_1		0x00000878
++#define MAC_TX_STATS_RESV5_2		0x0000087c
++#define MAC_RX_STATS_OCTETS		0x00000880
++#define MAC_RX_STATS_RESV1		0x00000884
++#define MAC_RX_STATS_FRAGMENTS		0x00000888
++#define MAC_RX_STATS_UCAST		0x0000088c
++#define MAC_RX_STATS_MCAST		0x00000890
++#define MAC_RX_STATS_BCAST		0x00000894
++#define MAC_RX_STATS_FCS_ERRORS		0x00000898
++#define MAC_RX_STATS_ALIGN_ERRORS	0x0000089c
++#define MAC_RX_STATS_XON_PAUSE_RECVD	0x000008a0
++#define MAC_RX_STATS_XOFF_PAUSE_RECVD	0x000008a4
++#define MAC_RX_STATS_MAC_CTRL_RECVD	0x000008a8
++#define MAC_RX_STATS_XOFF_ENTERED	0x000008ac
++#define MAC_RX_STATS_FRAME_TOO_LONG	0x000008b0
++#define MAC_RX_STATS_JABBERS		0x000008b4
++#define MAC_RX_STATS_UNDERSIZE		0x000008b8
++/* 0x8bc --> 0xc00 unused */
++
++/* Send data initiator control registers */
++#define SNDDATAI_MODE			0x00000c00
++#define  SNDDATAI_MODE_RESET		 0x00000001
++#define  SNDDATAI_MODE_ENABLE		 0x00000002
++#define  SNDDATAI_MODE_STAT_OFLOW_ENAB	 0x00000004
++#define SNDDATAI_STATUS			0x00000c04
++#define  SNDDATAI_STATUS_STAT_OFLOW	 0x00000004
++#define SNDDATAI_STATSCTRL		0x00000c08
++#define  SNDDATAI_SCTRL_ENABLE		 0x00000001
++#define  SNDDATAI_SCTRL_FASTUPD		 0x00000002
++#define  SNDDATAI_SCTRL_CLEAR		 0x00000004
++#define  SNDDATAI_SCTRL_FLUSH		 0x00000008
++#define  SNDDATAI_SCTRL_FORCE_ZERO	 0x00000010
++#define SNDDATAI_STATSENAB		0x00000c0c
++#define SNDDATAI_STATSINCMASK		0x00000c10
++/* 0xc14 --> 0xc80 unused */
++#define SNDDATAI_COS_CNT_0		0x00000c80
++#define SNDDATAI_COS_CNT_1		0x00000c84
++#define SNDDATAI_COS_CNT_2		0x00000c88
++#define SNDDATAI_COS_CNT_3		0x00000c8c
++#define SNDDATAI_COS_CNT_4		0x00000c90
++#define SNDDATAI_COS_CNT_5		0x00000c94
++#define SNDDATAI_COS_CNT_6		0x00000c98
++#define SNDDATAI_COS_CNT_7		0x00000c9c
++#define SNDDATAI_COS_CNT_8		0x00000ca0
++#define SNDDATAI_COS_CNT_9		0x00000ca4
++#define SNDDATAI_COS_CNT_10		0x00000ca8
++#define SNDDATAI_COS_CNT_11		0x00000cac
++#define SNDDATAI_COS_CNT_12		0x00000cb0
++#define SNDDATAI_COS_CNT_13		0x00000cb4
++#define SNDDATAI_COS_CNT_14		0x00000cb8
++#define SNDDATAI_COS_CNT_15		0x00000cbc
++#define SNDDATAI_DMA_RDQ_FULL_CNT	0x00000cc0
++#define SNDDATAI_DMA_PRIO_RDQ_FULL_CNT	0x00000cc4
++#define SNDDATAI_SDCQ_FULL_CNT		0x00000cc8
++#define SNDDATAI_NICRNG_SSND_PIDX_CNT	0x00000ccc
++#define SNDDATAI_STATS_UPDATED_CNT	0x00000cd0
++#define SNDDATAI_INTERRUPTS_CNT		0x00000cd4
++#define SNDDATAI_AVOID_INTERRUPTS_CNT	0x00000cd8
++#define SNDDATAI_SND_THRESH_HIT_CNT	0x00000cdc
++/* 0xce0 --> 0x1000 unused */
++
++/* Send data completion control registers */
++#define SNDDATAC_MODE			0x00001000
++#define  SNDDATAC_MODE_RESET		 0x00000001
++#define  SNDDATAC_MODE_ENABLE		 0x00000002
++/* 0x1004 --> 0x1400 unused */
++
++/* Send BD ring selector */
++#define SNDBDS_MODE			0x00001400
++#define  SNDBDS_MODE_RESET		 0x00000001
++#define  SNDBDS_MODE_ENABLE		 0x00000002
++#define  SNDBDS_MODE_ATTN_ENABLE	 0x00000004
++#define SNDBDS_STATUS			0x00001404
++#define  SNDBDS_STATUS_ERROR_ATTN	 0x00000004
++#define SNDBDS_HWDIAG			0x00001408
++/* 0x140c --> 0x1440 */
++#define SNDBDS_SEL_CON_IDX_0		0x00001440
++#define SNDBDS_SEL_CON_IDX_1		0x00001444
++#define SNDBDS_SEL_CON_IDX_2		0x00001448
++#define SNDBDS_SEL_CON_IDX_3		0x0000144c
++#define SNDBDS_SEL_CON_IDX_4		0x00001450
++#define SNDBDS_SEL_CON_IDX_5		0x00001454
++#define SNDBDS_SEL_CON_IDX_6		0x00001458
++#define SNDBDS_SEL_CON_IDX_7		0x0000145c
++#define SNDBDS_SEL_CON_IDX_8		0x00001460
++#define SNDBDS_SEL_CON_IDX_9		0x00001464
++#define SNDBDS_SEL_CON_IDX_10		0x00001468
++#define SNDBDS_SEL_CON_IDX_11		0x0000146c
++#define SNDBDS_SEL_CON_IDX_12		0x00001470
++#define SNDBDS_SEL_CON_IDX_13		0x00001474
++#define SNDBDS_SEL_CON_IDX_14		0x00001478
++#define SNDBDS_SEL_CON_IDX_15		0x0000147c
++/* 0x1480 --> 0x1800 unused */
++
++/* Send BD initiator control registers */
++#define SNDBDI_MODE			0x00001800
++#define  SNDBDI_MODE_RESET		 0x00000001
++#define  SNDBDI_MODE_ENABLE		 0x00000002
++#define  SNDBDI_MODE_ATTN_ENABLE	 0x00000004
++#define SNDBDI_STATUS			0x00001804
++#define  SNDBDI_STATUS_ERROR_ATTN	 0x00000004
++#define SNDBDI_IN_PROD_IDX_0		0x00001808
++#define SNDBDI_IN_PROD_IDX_1		0x0000180c
++#define SNDBDI_IN_PROD_IDX_2		0x00001810
++#define SNDBDI_IN_PROD_IDX_3		0x00001814
++#define SNDBDI_IN_PROD_IDX_4		0x00001818
++#define SNDBDI_IN_PROD_IDX_5		0x0000181c
++#define SNDBDI_IN_PROD_IDX_6		0x00001820
++#define SNDBDI_IN_PROD_IDX_7		0x00001824
++#define SNDBDI_IN_PROD_IDX_8		0x00001828
++#define SNDBDI_IN_PROD_IDX_9		0x0000182c
++#define SNDBDI_IN_PROD_IDX_10		0x00001830
++#define SNDBDI_IN_PROD_IDX_11		0x00001834
++#define SNDBDI_IN_PROD_IDX_12		0x00001838
++#define SNDBDI_IN_PROD_IDX_13		0x0000183c
++#define SNDBDI_IN_PROD_IDX_14		0x00001840
++#define SNDBDI_IN_PROD_IDX_15		0x00001844
++/* 0x1848 --> 0x1c00 unused */
++
++/* Send BD completion control registers */
++#define SNDBDC_MODE			0x00001c00
++#define SNDBDC_MODE_RESET		 0x00000001
++#define SNDBDC_MODE_ENABLE		 0x00000002
++#define SNDBDC_MODE_ATTN_ENABLE		 0x00000004
++/* 0x1c04 --> 0x2000 unused */
++
++/* Receive list placement control registers */
++#define RCVLPC_MODE			0x00002000
++#define  RCVLPC_MODE_RESET		 0x00000001
++#define  RCVLPC_MODE_ENABLE		 0x00000002
++#define  RCVLPC_MODE_CLASS0_ATTN_ENAB	 0x00000004
++#define  RCVLPC_MODE_MAPOOR_AATTN_ENAB	 0x00000008
++#define  RCVLPC_MODE_STAT_OFLOW_ENAB	 0x00000010
++#define RCVLPC_STATUS			0x00002004
++#define  RCVLPC_STATUS_CLASS0		 0x00000004
++#define  RCVLPC_STATUS_MAPOOR		 0x00000008
++#define  RCVLPC_STATUS_STAT_OFLOW	 0x00000010
++#define RCVLPC_LOCK			0x00002008
++#define  RCVLPC_LOCK_REQ_MASK		 0x0000ffff
++#define  RCVLPC_LOCK_REQ_SHIFT		 0
++#define  RCVLPC_LOCK_GRANT_MASK		 0xffff0000
++#define  RCVLPC_LOCK_GRANT_SHIFT	 16
++#define RCVLPC_NON_EMPTY_BITS		0x0000200c
++#define  RCVLPC_NON_EMPTY_BITS_MASK	 0x0000ffff
++#define RCVLPC_CONFIG			0x00002010
++#define RCVLPC_STATSCTRL		0x00002014
++#define  RCVLPC_STATSCTRL_ENABLE	 0x00000001
++#define  RCVLPC_STATSCTRL_FASTUPD	 0x00000002
++#define RCVLPC_STATS_ENABLE		0x00002018
++#define  RCVLPC_STATSENAB_LNGBRST_RFIX	 0x00400000
++#define RCVLPC_STATS_INCMASK		0x0000201c
++/* 0x2020 --> 0x2100 unused */
++#define RCVLPC_SELLST_BASE		0x00002100 /* 16 16-byte entries */
++#define  SELLST_TAIL			0x00000004
++#define  SELLST_CONT			0x00000008
++#define  SELLST_UNUSED			0x0000000c
++#define RCVLPC_COS_CNTL_BASE		0x00002200 /* 16 4-byte entries */
++#define RCVLPC_DROP_FILTER_CNT		0x00002240
++#define RCVLPC_DMA_WQ_FULL_CNT		0x00002244
++#define RCVLPC_DMA_HIPRIO_WQ_FULL_CNT	0x00002248
++#define RCVLPC_NO_RCV_BD_CNT		0x0000224c
++#define RCVLPC_IN_DISCARDS_CNT		0x00002250
++#define RCVLPC_IN_ERRORS_CNT		0x00002254
++#define RCVLPC_RCV_THRESH_HIT_CNT	0x00002258
++/* 0x225c --> 0x2400 unused */
++
++/* Receive Data and Receive BD Initiator Control */
++#define RCVDBDI_MODE			0x00002400
++#define  RCVDBDI_MODE_RESET		 0x00000001
++#define  RCVDBDI_MODE_ENABLE		 0x00000002
++#define  RCVDBDI_MODE_JUMBOBD_NEEDED	 0x00000004
++#define  RCVDBDI_MODE_FRM_TOO_BIG	 0x00000008
++#define  RCVDBDI_MODE_INV_RING_SZ	 0x00000010
++#define RCVDBDI_STATUS			0x00002404
++#define  RCVDBDI_STATUS_JUMBOBD_NEEDED	 0x00000004
++#define  RCVDBDI_STATUS_FRM_TOO_BIG	 0x00000008
++#define  RCVDBDI_STATUS_INV_RING_SZ	 0x00000010
++#define RCVDBDI_SPLIT_FRAME_MINSZ	0x00002408
++/* 0x240c --> 0x2440 unused */
++#define RCVDBDI_JUMBO_BD		0x00002440 /* TG3_BDINFO_... */
++#define RCVDBDI_STD_BD			0x00002450 /* TG3_BDINFO_... */
++#define RCVDBDI_MINI_BD			0x00002460 /* TG3_BDINFO_... */
++#define RCVDBDI_JUMBO_CON_IDX		0x00002470
++#define RCVDBDI_STD_CON_IDX		0x00002474
++#define RCVDBDI_MINI_CON_IDX		0x00002478
++/* 0x247c --> 0x2480 unused */
++#define RCVDBDI_BD_PROD_IDX_0		0x00002480
++#define RCVDBDI_BD_PROD_IDX_1		0x00002484
++#define RCVDBDI_BD_PROD_IDX_2		0x00002488
++#define RCVDBDI_BD_PROD_IDX_3		0x0000248c
++#define RCVDBDI_BD_PROD_IDX_4		0x00002490
++#define RCVDBDI_BD_PROD_IDX_5		0x00002494
++#define RCVDBDI_BD_PROD_IDX_6		0x00002498
++#define RCVDBDI_BD_PROD_IDX_7		0x0000249c
++#define RCVDBDI_BD_PROD_IDX_8		0x000024a0
++#define RCVDBDI_BD_PROD_IDX_9		0x000024a4
++#define RCVDBDI_BD_PROD_IDX_10		0x000024a8
++#define RCVDBDI_BD_PROD_IDX_11		0x000024ac
++#define RCVDBDI_BD_PROD_IDX_12		0x000024b0
++#define RCVDBDI_BD_PROD_IDX_13		0x000024b4
++#define RCVDBDI_BD_PROD_IDX_14		0x000024b8
++#define RCVDBDI_BD_PROD_IDX_15		0x000024bc
++#define RCVDBDI_HWDIAG			0x000024c0
++/* 0x24c4 --> 0x2800 unused */
++
++/* Receive Data Completion Control */
++#define RCVDCC_MODE			0x00002800
++#define  RCVDCC_MODE_RESET		 0x00000001
++#define  RCVDCC_MODE_ENABLE		 0x00000002
++#define  RCVDCC_MODE_ATTN_ENABLE	 0x00000004
++/* 0x2804 --> 0x2c00 unused */
++
++/* Receive BD Initiator Control Registers */
++#define RCVBDI_MODE			0x00002c00
++#define  RCVBDI_MODE_RESET		 0x00000001
++#define  RCVBDI_MODE_ENABLE		 0x00000002
++#define  RCVBDI_MODE_RCB_ATTN_ENAB	 0x00000004
++#define RCVBDI_STATUS			0x00002c04
++#define  RCVBDI_STATUS_RCB_ATTN		 0x00000004
++#define RCVBDI_JUMBO_PROD_IDX		0x00002c08
++#define RCVBDI_STD_PROD_IDX		0x00002c0c
++#define RCVBDI_MINI_PROD_IDX		0x00002c10
++#define RCVBDI_MINI_THRESH		0x00002c14
++#define RCVBDI_STD_THRESH		0x00002c18
++#define RCVBDI_JUMBO_THRESH		0x00002c1c
++/* 0x2c20 --> 0x3000 unused */
++
++/* Receive BD Completion Control Registers */
++#define RCVCC_MODE			0x00003000
++#define  RCVCC_MODE_RESET		 0x00000001
++#define  RCVCC_MODE_ENABLE		 0x00000002
++#define  RCVCC_MODE_ATTN_ENABLE		 0x00000004
++#define RCVCC_STATUS			0x00003004
++#define  RCVCC_STATUS_ERROR_ATTN	 0x00000004
++#define RCVCC_JUMP_PROD_IDX		0x00003008
++#define RCVCC_STD_PROD_IDX		0x0000300c
++#define RCVCC_MINI_PROD_IDX		0x00003010
++/* 0x3014 --> 0x3400 unused */
++
++/* Receive list selector control registers */
++#define RCVLSC_MODE			0x00003400
++#define  RCVLSC_MODE_RESET		 0x00000001
++#define  RCVLSC_MODE_ENABLE		 0x00000002
++#define  RCVLSC_MODE_ATTN_ENABLE	 0x00000004
++#define RCVLSC_STATUS			0x00003404
++#define  RCVLSC_STATUS_ERROR_ATTN	 0x00000004
++/* 0x3408 --> 0x3800 unused */
++
++/* Mbuf cluster free registers */
++#define MBFREE_MODE			0x00003800
++#define  MBFREE_MODE_RESET		 0x00000001
++#define  MBFREE_MODE_ENABLE		 0x00000002
++#define MBFREE_STATUS			0x00003804
++/* 0x3808 --> 0x3c00 unused */
++
++/* Host coalescing control registers */
++#define HOSTCC_MODE			0x00003c00
++#define  HOSTCC_MODE_RESET		 0x00000001
++#define  HOSTCC_MODE_ENABLE		 0x00000002
++#define  HOSTCC_MODE_ATTN		 0x00000004
++#define  HOSTCC_MODE_NOW		 0x00000008
++#define  HOSTCC_MODE_FULL_STATUS	 0x00000000
++#define  HOSTCC_MODE_64BYTE		 0x00000080
++#define  HOSTCC_MODE_32BYTE		 0x00000100
++#define  HOSTCC_MODE_CLRTICK_RXBD	 0x00000200
++#define  HOSTCC_MODE_CLRTICK_TXBD	 0x00000400
++#define  HOSTCC_MODE_NOINT_ON_NOW	 0x00000800
++#define  HOSTCC_MODE_NOINT_ON_FORCE	 0x00001000
++#define HOSTCC_STATUS			0x00003c04
++#define  HOSTCC_STATUS_ERROR_ATTN	 0x00000004
++#define HOSTCC_RXCOL_TICKS		0x00003c08
++#define  LOW_RXCOL_TICKS		 0x00000032
++#define  DEFAULT_RXCOL_TICKS		 0x00000048
++#define  HIGH_RXCOL_TICKS		 0x00000096
++#define HOSTCC_TXCOL_TICKS		0x00003c0c
++#define  LOW_TXCOL_TICKS		 0x00000096
++#define  DEFAULT_TXCOL_TICKS		 0x0000012c
++#define  HIGH_TXCOL_TICKS		 0x00000145
++#define HOSTCC_RXMAX_FRAMES		0x00003c10
++#define  LOW_RXMAX_FRAMES		 0x00000005
++#define  DEFAULT_RXMAX_FRAMES		 0x00000008
++#define  HIGH_RXMAX_FRAMES		 0x00000012
++#define HOSTCC_TXMAX_FRAMES		0x00003c14
++#define  LOW_TXMAX_FRAMES		 0x00000035
++#define  DEFAULT_TXMAX_FRAMES		 0x0000004b
++#define  HIGH_TXMAX_FRAMES		 0x00000052
++#define HOSTCC_RXCOAL_TICK_INT		0x00003c18
++#define  DEFAULT_RXCOAL_TICK_INT	 0x00000019
++#define HOSTCC_TXCOAL_TICK_INT		0x00003c1c
++#define  DEFAULT_TXCOAL_TICK_INT	 0x00000019
++#define HOSTCC_RXCOAL_MAXF_INT		0x00003c20
++#define  DEFAULT_RXCOAL_MAXF_INT	 0x00000005
++#define HOSTCC_TXCOAL_MAXF_INT		0x00003c24
++#define  DEFAULT_TXCOAL_MAXF_INT	 0x00000005
++#define HOSTCC_STAT_COAL_TICKS		0x00003c28
++#define  DEFAULT_STAT_COAL_TICKS	 0x000f4240
++/* 0x3c2c --> 0x3c30 unused */
++#define HOSTCC_STATS_BLK_HOST_ADDR	0x00003c30 /* 64-bit */
++#define HOSTCC_STATUS_BLK_HOST_ADDR	0x00003c38 /* 64-bit */
++#define HOSTCC_STATS_BLK_NIC_ADDR	0x00003c40
++#define HOSTCC_STATUS_BLK_NIC_ADDR	0x00003c44
++#define HOSTCC_FLOW_ATTN		0x00003c48
++/* 0x3c4c --> 0x3c50 unused */
++#define HOSTCC_JUMBO_CON_IDX		0x00003c50
++#define HOSTCC_STD_CON_IDX		0x00003c54
++#define HOSTCC_MINI_CON_IDX		0x00003c58
++/* 0x3c5c --> 0x3c80 unused */
++#define HOSTCC_RET_PROD_IDX_0		0x00003c80
++#define HOSTCC_RET_PROD_IDX_1		0x00003c84
++#define HOSTCC_RET_PROD_IDX_2		0x00003c88
++#define HOSTCC_RET_PROD_IDX_3		0x00003c8c
++#define HOSTCC_RET_PROD_IDX_4		0x00003c90
++#define HOSTCC_RET_PROD_IDX_5		0x00003c94
++#define HOSTCC_RET_PROD_IDX_6		0x00003c98
++#define HOSTCC_RET_PROD_IDX_7		0x00003c9c
++#define HOSTCC_RET_PROD_IDX_8		0x00003ca0
++#define HOSTCC_RET_PROD_IDX_9		0x00003ca4
++#define HOSTCC_RET_PROD_IDX_10		0x00003ca8
++#define HOSTCC_RET_PROD_IDX_11		0x00003cac
++#define HOSTCC_RET_PROD_IDX_12		0x00003cb0
++#define HOSTCC_RET_PROD_IDX_13		0x00003cb4
++#define HOSTCC_RET_PROD_IDX_14		0x00003cb8
++#define HOSTCC_RET_PROD_IDX_15		0x00003cbc
++#define HOSTCC_SND_CON_IDX_0		0x00003cc0
++#define HOSTCC_SND_CON_IDX_1		0x00003cc4
++#define HOSTCC_SND_CON_IDX_2		0x00003cc8
++#define HOSTCC_SND_CON_IDX_3		0x00003ccc
++#define HOSTCC_SND_CON_IDX_4		0x00003cd0
++#define HOSTCC_SND_CON_IDX_5		0x00003cd4
++#define HOSTCC_SND_CON_IDX_6		0x00003cd8
++#define HOSTCC_SND_CON_IDX_7		0x00003cdc
++#define HOSTCC_SND_CON_IDX_8		0x00003ce0
++#define HOSTCC_SND_CON_IDX_9		0x00003ce4
++#define HOSTCC_SND_CON_IDX_10		0x00003ce8
++#define HOSTCC_SND_CON_IDX_11		0x00003cec
++#define HOSTCC_SND_CON_IDX_12		0x00003cf0
++#define HOSTCC_SND_CON_IDX_13		0x00003cf4
++#define HOSTCC_SND_CON_IDX_14		0x00003cf8
++#define HOSTCC_SND_CON_IDX_15		0x00003cfc
++/* 0x3d00 --> 0x4000 unused */
++
++/* Memory arbiter control registers */
++#define MEMARB_MODE			0x00004000
++#define  MEMARB_MODE_RESET		 0x00000001
++#define  MEMARB_MODE_ENABLE		 0x00000002
++#define MEMARB_STATUS			0x00004004
++#define MEMARB_TRAP_ADDR_LOW		0x00004008
++#define MEMARB_TRAP_ADDR_HIGH		0x0000400c
++/* 0x4010 --> 0x4400 unused */
++
++/* Buffer manager control registers */
++#define BUFMGR_MODE			0x00004400
++#define  BUFMGR_MODE_RESET		 0x00000001
++#define  BUFMGR_MODE_ENABLE		 0x00000002
++#define  BUFMGR_MODE_ATTN_ENABLE	 0x00000004
++#define  BUFMGR_MODE_BM_TEST		 0x00000008
++#define  BUFMGR_MODE_MBLOW_ATTN_ENAB	 0x00000010
++#define BUFMGR_STATUS			0x00004404
++#define  BUFMGR_STATUS_ERROR		 0x00000004
++#define  BUFMGR_STATUS_MBLOW		 0x00000010
++#define BUFMGR_MB_POOL_ADDR		0x00004408
++#define BUFMGR_MB_POOL_SIZE		0x0000440c
++#define BUFMGR_MB_RDMA_LOW_WATER	0x00004410
++#define  DEFAULT_MB_RDMA_LOW_WATER	 0x00000050
++#define  DEFAULT_MB_RDMA_LOW_WATER_5705	 0x00000000
++#define  DEFAULT_MB_RDMA_LOW_WATER_JUMBO 0x00000130
++#define BUFMGR_MB_MACRX_LOW_WATER	0x00004414
++#define  DEFAULT_MB_MACRX_LOW_WATER	  0x00000020
++#define  DEFAULT_MB_MACRX_LOW_WATER_5705  0x00000010
++#define  DEFAULT_MB_MACRX_LOW_WATER_JUMBO 0x00000098
++#define BUFMGR_MB_HIGH_WATER		0x00004418
++#define  DEFAULT_MB_HIGH_WATER		 0x00000060
++#define  DEFAULT_MB_HIGH_WATER_5705	 0x00000060
++#define  DEFAULT_MB_HIGH_WATER_JUMBO	 0x0000017c
++#define BUFMGR_RX_MB_ALLOC_REQ		0x0000441c
++#define  BUFMGR_MB_ALLOC_BIT		 0x10000000
++#define BUFMGR_RX_MB_ALLOC_RESP		0x00004420
++#define BUFMGR_TX_MB_ALLOC_REQ		0x00004424
++#define BUFMGR_TX_MB_ALLOC_RESP		0x00004428
++#define BUFMGR_DMA_DESC_POOL_ADDR	0x0000442c
++#define BUFMGR_DMA_DESC_POOL_SIZE	0x00004430
++#define BUFMGR_DMA_LOW_WATER		0x00004434
++#define  DEFAULT_DMA_LOW_WATER		 0x00000005
++#define BUFMGR_DMA_HIGH_WATER		0x00004438
++#define  DEFAULT_DMA_HIGH_WATER		 0x0000000a
++#define BUFMGR_RX_DMA_ALLOC_REQ		0x0000443c
++#define BUFMGR_RX_DMA_ALLOC_RESP	0x00004440
++#define BUFMGR_TX_DMA_ALLOC_REQ		0x00004444
++#define BUFMGR_TX_DMA_ALLOC_RESP	0x00004448
++#define BUFMGR_HWDIAG_0			0x0000444c
++#define BUFMGR_HWDIAG_1			0x00004450
++#define BUFMGR_HWDIAG_2			0x00004454
++/* 0x4458 --> 0x4800 unused */
++
++/* Read DMA control registers */
++#define RDMAC_MODE			0x00004800
++#define  RDMAC_MODE_RESET		 0x00000001
++#define  RDMAC_MODE_ENABLE		 0x00000002
++#define  RDMAC_MODE_TGTABORT_ENAB	 0x00000004
++#define  RDMAC_MODE_MSTABORT_ENAB	 0x00000008
++#define  RDMAC_MODE_PARITYERR_ENAB	 0x00000010
++#define  RDMAC_MODE_ADDROFLOW_ENAB	 0x00000020
++#define  RDMAC_MODE_FIFOOFLOW_ENAB	 0x00000040
++#define  RDMAC_MODE_FIFOURUN_ENAB	 0x00000080
++#define  RDMAC_MODE_FIFOOREAD_ENAB	 0x00000100
++#define  RDMAC_MODE_LNGREAD_ENAB	 0x00000200
++#define  RDMAC_MODE_SPLIT_ENABLE	 0x00000800
++#define  RDMAC_MODE_SPLIT_RESET		 0x00001000
++#define  RDMAC_MODE_FIFO_SIZE_128	 0x00020000
++#define  RDMAC_MODE_FIFO_LONG_BURST	 0x00030000
++#define RDMAC_STATUS			0x00004804
++#define  RDMAC_STATUS_TGTABORT		 0x00000004
++#define  RDMAC_STATUS_MSTABORT		 0x00000008
++#define  RDMAC_STATUS_PARITYERR		 0x00000010
++#define  RDMAC_STATUS_ADDROFLOW		 0x00000020
++#define  RDMAC_STATUS_FIFOOFLOW		 0x00000040
++#define  RDMAC_STATUS_FIFOURUN		 0x00000080
++#define  RDMAC_STATUS_FIFOOREAD		 0x00000100
++#define  RDMAC_STATUS_LNGREAD		 0x00000200
++/* 0x4808 --> 0x4c00 unused */
++
++/* Write DMA control registers */
++#define WDMAC_MODE			0x00004c00
++#define  WDMAC_MODE_RESET		 0x00000001
++#define  WDMAC_MODE_ENABLE		 0x00000002
++#define  WDMAC_MODE_TGTABORT_ENAB	 0x00000004
++#define  WDMAC_MODE_MSTABORT_ENAB	 0x00000008
++#define  WDMAC_MODE_PARITYERR_ENAB	 0x00000010
++#define  WDMAC_MODE_ADDROFLOW_ENAB	 0x00000020
++#define  WDMAC_MODE_FIFOOFLOW_ENAB	 0x00000040
++#define  WDMAC_MODE_FIFOURUN_ENAB	 0x00000080
++#define  WDMAC_MODE_FIFOOREAD_ENAB	 0x00000100
++#define  WDMAC_MODE_LNGREAD_ENAB	 0x00000200
++#define  WDMAC_MODE_RX_ACCEL	 	 0x00000400
++#define WDMAC_STATUS			0x00004c04
++#define  WDMAC_STATUS_TGTABORT		 0x00000004
++#define  WDMAC_STATUS_MSTABORT		 0x00000008
++#define  WDMAC_STATUS_PARITYERR		 0x00000010
++#define  WDMAC_STATUS_ADDROFLOW		 0x00000020
++#define  WDMAC_STATUS_FIFOOFLOW		 0x00000040
++#define  WDMAC_STATUS_FIFOURUN		 0x00000080
++#define  WDMAC_STATUS_FIFOOREAD		 0x00000100
++#define  WDMAC_STATUS_LNGREAD		 0x00000200
++/* 0x4c08 --> 0x5000 unused */
++
++/* Per-cpu register offsets (arm9) */
++#define CPU_MODE			0x00000000
++#define  CPU_MODE_RESET			 0x00000001
++#define  CPU_MODE_HALT			 0x00000400
++#define CPU_STATE			0x00000004
++#define CPU_EVTMASK			0x00000008
++/* 0xc --> 0x1c reserved */
++#define CPU_PC				0x0000001c
++#define CPU_INSN			0x00000020
++#define CPU_SPAD_UFLOW			0x00000024
++#define CPU_WDOG_CLEAR			0x00000028
++#define CPU_WDOG_VECTOR			0x0000002c
++#define CPU_WDOG_PC			0x00000030
++#define CPU_HW_BP			0x00000034
++/* 0x38 --> 0x44 unused */
++#define CPU_WDOG_SAVED_STATE		0x00000044
++#define CPU_LAST_BRANCH_ADDR		0x00000048
++#define CPU_SPAD_UFLOW_SET		0x0000004c
++/* 0x50 --> 0x200 unused */
++#define CPU_R0				0x00000200
++#define CPU_R1				0x00000204
++#define CPU_R2				0x00000208
++#define CPU_R3				0x0000020c
++#define CPU_R4				0x00000210
++#define CPU_R5				0x00000214
++#define CPU_R6				0x00000218
++#define CPU_R7				0x0000021c
++#define CPU_R8				0x00000220
++#define CPU_R9				0x00000224
++#define CPU_R10				0x00000228
++#define CPU_R11				0x0000022c
++#define CPU_R12				0x00000230
++#define CPU_R13				0x00000234
++#define CPU_R14				0x00000238
++#define CPU_R15				0x0000023c
++#define CPU_R16				0x00000240
++#define CPU_R17				0x00000244
++#define CPU_R18				0x00000248
++#define CPU_R19				0x0000024c
++#define CPU_R20				0x00000250
++#define CPU_R21				0x00000254
++#define CPU_R22				0x00000258
++#define CPU_R23				0x0000025c
++#define CPU_R24				0x00000260
++#define CPU_R25				0x00000264
++#define CPU_R26				0x00000268
++#define CPU_R27				0x0000026c
++#define CPU_R28				0x00000270
++#define CPU_R29				0x00000274
++#define CPU_R30				0x00000278
++#define CPU_R31				0x0000027c
++/* 0x280 --> 0x400 unused */
++
++#define RX_CPU_BASE			0x00005000
++#define TX_CPU_BASE			0x00005400
++
++/* Mailboxes */
++#define GRCMBOX_INTERRUPT_0		0x00005800 /* 64-bit */
++#define GRCMBOX_INTERRUPT_1		0x00005808 /* 64-bit */
++#define GRCMBOX_INTERRUPT_2		0x00005810 /* 64-bit */
++#define GRCMBOX_INTERRUPT_3		0x00005818 /* 64-bit */
++#define GRCMBOX_GENERAL_0		0x00005820 /* 64-bit */
++#define GRCMBOX_GENERAL_1		0x00005828 /* 64-bit */
++#define GRCMBOX_GENERAL_2		0x00005830 /* 64-bit */
++#define GRCMBOX_GENERAL_3		0x00005838 /* 64-bit */
++#define GRCMBOX_GENERAL_4		0x00005840 /* 64-bit */
++#define GRCMBOX_GENERAL_5		0x00005848 /* 64-bit */
++#define GRCMBOX_GENERAL_6		0x00005850 /* 64-bit */
++#define GRCMBOX_GENERAL_7		0x00005858 /* 64-bit */
++#define GRCMBOX_RELOAD_STAT		0x00005860 /* 64-bit */
++#define GRCMBOX_RCVSTD_PROD_IDX		0x00005868 /* 64-bit */
++#define GRCMBOX_RCVJUMBO_PROD_IDX	0x00005870 /* 64-bit */
++#define GRCMBOX_RCVMINI_PROD_IDX	0x00005878 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_0	0x00005880 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_1	0x00005888 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_2	0x00005890 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_3	0x00005898 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_4	0x000058a0 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_5	0x000058a8 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_6	0x000058b0 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_7	0x000058b8 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_8	0x000058c0 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_9	0x000058c8 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_10	0x000058d0 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_11	0x000058d8 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_12	0x000058e0 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_13	0x000058e8 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_14	0x000058f0 /* 64-bit */
++#define GRCMBOX_RCVRET_CON_IDX_15	0x000058f8 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_0	0x00005900 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_1	0x00005908 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_2	0x00005910 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_3	0x00005918 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_4	0x00005920 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_5	0x00005928 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_6	0x00005930 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_7	0x00005938 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_8	0x00005940 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_9	0x00005948 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_10	0x00005950 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_11	0x00005958 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_12	0x00005960 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_13	0x00005968 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_14	0x00005970 /* 64-bit */
++#define GRCMBOX_SNDHOST_PROD_IDX_15	0x00005978 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_0	0x00005980 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_1	0x00005988 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_2	0x00005990 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_3	0x00005998 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_4	0x000059a0 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_5	0x000059a8 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_6	0x000059b0 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_7	0x000059b8 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_8	0x000059c0 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_9	0x000059c8 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_10	0x000059d0 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_11	0x000059d8 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_12	0x000059e0 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_13	0x000059e8 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_14	0x000059f0 /* 64-bit */
++#define GRCMBOX_SNDNIC_PROD_IDX_15	0x000059f8 /* 64-bit */
++#define GRCMBOX_HIGH_PRIO_EV_VECTOR	0x00005a00
++#define GRCMBOX_HIGH_PRIO_EV_MASK	0x00005a04
++#define GRCMBOX_LOW_PRIO_EV_VEC		0x00005a08
++#define GRCMBOX_LOW_PRIO_EV_MASK	0x00005a0c
++/* 0x5a10 --> 0x5c00 */
++
++/* Flow Through queues */
++#define FTQ_RESET			0x00005c00
++/* 0x5c04 --> 0x5c10 unused */
++#define FTQ_DMA_NORM_READ_CTL		0x00005c10
++#define FTQ_DMA_NORM_READ_FULL_CNT	0x00005c14
++#define FTQ_DMA_NORM_READ_FIFO_ENQDEQ	0x00005c18
++#define FTQ_DMA_NORM_READ_WRITE_PEEK	0x00005c1c
++#define FTQ_DMA_HIGH_READ_CTL		0x00005c20
++#define FTQ_DMA_HIGH_READ_FULL_CNT	0x00005c24
++#define FTQ_DMA_HIGH_READ_FIFO_ENQDEQ	0x00005c28
++#define FTQ_DMA_HIGH_READ_WRITE_PEEK	0x00005c2c
++#define FTQ_DMA_COMP_DISC_CTL		0x00005c30
++#define FTQ_DMA_COMP_DISC_FULL_CNT	0x00005c34
++#define FTQ_DMA_COMP_DISC_FIFO_ENQDEQ	0x00005c38
++#define FTQ_DMA_COMP_DISC_WRITE_PEEK	0x00005c3c
++#define FTQ_SEND_BD_COMP_CTL		0x00005c40
++#define FTQ_SEND_BD_COMP_FULL_CNT	0x00005c44
++#define FTQ_SEND_BD_COMP_FIFO_ENQDEQ	0x00005c48
++#define FTQ_SEND_BD_COMP_WRITE_PEEK	0x00005c4c
++#define FTQ_SEND_DATA_INIT_CTL		0x00005c50
++#define FTQ_SEND_DATA_INIT_FULL_CNT	0x00005c54
++#define FTQ_SEND_DATA_INIT_FIFO_ENQDEQ	0x00005c58
++#define FTQ_SEND_DATA_INIT_WRITE_PEEK	0x00005c5c
++#define FTQ_DMA_NORM_WRITE_CTL		0x00005c60
++#define FTQ_DMA_NORM_WRITE_FULL_CNT	0x00005c64
++#define FTQ_DMA_NORM_WRITE_FIFO_ENQDEQ	0x00005c68
++#define FTQ_DMA_NORM_WRITE_WRITE_PEEK	0x00005c6c
++#define FTQ_DMA_HIGH_WRITE_CTL		0x00005c70
++#define FTQ_DMA_HIGH_WRITE_FULL_CNT	0x00005c74
++#define FTQ_DMA_HIGH_WRITE_FIFO_ENQDEQ	0x00005c78
++#define FTQ_DMA_HIGH_WRITE_WRITE_PEEK	0x00005c7c
++#define FTQ_SWTYPE1_CTL			0x00005c80
++#define FTQ_SWTYPE1_FULL_CNT		0x00005c84
++#define FTQ_SWTYPE1_FIFO_ENQDEQ		0x00005c88
++#define FTQ_SWTYPE1_WRITE_PEEK		0x00005c8c
++#define FTQ_SEND_DATA_COMP_CTL		0x00005c90
++#define FTQ_SEND_DATA_COMP_FULL_CNT	0x00005c94
++#define FTQ_SEND_DATA_COMP_FIFO_ENQDEQ	0x00005c98
++#define FTQ_SEND_DATA_COMP_WRITE_PEEK	0x00005c9c
++#define FTQ_HOST_COAL_CTL		0x00005ca0
++#define FTQ_HOST_COAL_FULL_CNT		0x00005ca4
++#define FTQ_HOST_COAL_FIFO_ENQDEQ	0x00005ca8
++#define FTQ_HOST_COAL_WRITE_PEEK	0x00005cac
++#define FTQ_MAC_TX_CTL			0x00005cb0
++#define FTQ_MAC_TX_FULL_CNT		0x00005cb4
++#define FTQ_MAC_TX_FIFO_ENQDEQ		0x00005cb8
++#define FTQ_MAC_TX_WRITE_PEEK		0x00005cbc
++#define FTQ_MB_FREE_CTL			0x00005cc0
++#define FTQ_MB_FREE_FULL_CNT		0x00005cc4
++#define FTQ_MB_FREE_FIFO_ENQDEQ		0x00005cc8
++#define FTQ_MB_FREE_WRITE_PEEK		0x00005ccc
++#define FTQ_RCVBD_COMP_CTL		0x00005cd0
++#define FTQ_RCVBD_COMP_FULL_CNT		0x00005cd4
++#define FTQ_RCVBD_COMP_FIFO_ENQDEQ	0x00005cd8
++#define FTQ_RCVBD_COMP_WRITE_PEEK	0x00005cdc
++#define FTQ_RCVLST_PLMT_CTL		0x00005ce0
++#define FTQ_RCVLST_PLMT_FULL_CNT	0x00005ce4
++#define FTQ_RCVLST_PLMT_FIFO_ENQDEQ	0x00005ce8
++#define FTQ_RCVLST_PLMT_WRITE_PEEK	0x00005cec
++#define FTQ_RCVDATA_INI_CTL		0x00005cf0
++#define FTQ_RCVDATA_INI_FULL_CNT	0x00005cf4
++#define FTQ_RCVDATA_INI_FIFO_ENQDEQ	0x00005cf8
++#define FTQ_RCVDATA_INI_WRITE_PEEK	0x00005cfc
++#define FTQ_RCVDATA_COMP_CTL		0x00005d00
++#define FTQ_RCVDATA_COMP_FULL_CNT	0x00005d04
++#define FTQ_RCVDATA_COMP_FIFO_ENQDEQ	0x00005d08
++#define FTQ_RCVDATA_COMP_WRITE_PEEK	0x00005d0c
++#define FTQ_SWTYPE2_CTL			0x00005d10
++#define FTQ_SWTYPE2_FULL_CNT		0x00005d14
++#define FTQ_SWTYPE2_FIFO_ENQDEQ		0x00005d18
++#define FTQ_SWTYPE2_WRITE_PEEK		0x00005d1c
++/* 0x5d20 --> 0x6000 unused */
++
++/* Message signaled interrupt registers */
++#define MSGINT_MODE			0x00006000
++#define  MSGINT_MODE_RESET		 0x00000001
++#define  MSGINT_MODE_ENABLE		 0x00000002
++#define MSGINT_STATUS			0x00006004
++#define MSGINT_FIFO			0x00006008
++/* 0x600c --> 0x6400 unused */
++
++/* DMA completion registers */
++#define DMAC_MODE			0x00006400
++#define  DMAC_MODE_RESET		 0x00000001
++#define  DMAC_MODE_ENABLE		 0x00000002
++/* 0x6404 --> 0x6800 unused */
++
++/* GRC registers */
++#define GRC_MODE			0x00006800
++#define  GRC_MODE_UPD_ON_COAL		0x00000001
++#define  GRC_MODE_BSWAP_NONFRM_DATA	0x00000002
++#define  GRC_MODE_WSWAP_NONFRM_DATA	0x00000004
++#define  GRC_MODE_BSWAP_DATA		0x00000010
++#define  GRC_MODE_WSWAP_DATA		0x00000020
++#define  GRC_MODE_SPLITHDR		0x00000100
++#define  GRC_MODE_NOFRM_CRACKING	0x00000200
++#define  GRC_MODE_INCL_CRC		0x00000400
++#define  GRC_MODE_ALLOW_BAD_FRMS	0x00000800
++#define  GRC_MODE_NOIRQ_ON_SENDS	0x00002000
++#define  GRC_MODE_NOIRQ_ON_RCV		0x00004000
++#define  GRC_MODE_FORCE_PCI32BIT	0x00008000
++#define  GRC_MODE_HOST_STACKUP		0x00010000
++#define  GRC_MODE_HOST_SENDBDS		0x00020000
++#define  GRC_MODE_NO_TX_PHDR_CSUM	0x00100000
++#define  GRC_MODE_NO_RX_PHDR_CSUM	0x00800000
++#define  GRC_MODE_IRQ_ON_TX_CPU_ATTN	0x01000000
++#define  GRC_MODE_IRQ_ON_RX_CPU_ATTN	0x02000000
++#define  GRC_MODE_IRQ_ON_MAC_ATTN	0x04000000
++#define  GRC_MODE_IRQ_ON_DMA_ATTN	0x08000000
++#define  GRC_MODE_IRQ_ON_FLOW_ATTN	0x10000000
++#define  GRC_MODE_4X_NIC_SEND_RINGS	0x20000000
++#define  GRC_MODE_MCAST_FRM_ENABLE	0x40000000
++#define GRC_MISC_CFG			0x00006804
++#define  GRC_MISC_CFG_CORECLK_RESET	0x00000001
++#define  GRC_MISC_CFG_PRESCALAR_MASK	0x000000fe
++#define  GRC_MISC_CFG_PRESCALAR_SHIFT	1
++#define  GRC_MISC_CFG_BOARD_ID_MASK	0x0001e000
++#define  GRC_MISC_CFG_BOARD_ID_5700	0x0001e000
++#define  GRC_MISC_CFG_BOARD_ID_5701	0x00000000
++#define  GRC_MISC_CFG_BOARD_ID_5702FE	0x00004000
++#define  GRC_MISC_CFG_BOARD_ID_5703	0x00000000
++#define  GRC_MISC_CFG_BOARD_ID_5703S	0x00002000
++#define  GRC_MISC_CFG_BOARD_ID_5704	0x00000000
++#define  GRC_MISC_CFG_BOARD_ID_5704CIOBE 0x00004000
++#define  GRC_MISC_CFG_BOARD_ID_5704_A2	0x00008000
++#define  GRC_MISC_CFG_BOARD_ID_5788	0x00010000
++#define  GRC_MISC_CFG_BOARD_ID_5788M	0x00018000
++#define  GRC_MISC_CFG_BOARD_ID_AC91002A1 0x00018000
++#define  GRC_MISC_CFG_KEEP_GPHY_POWER	0x04000000
++#define GRC_LOCAL_CTRL			0x00006808
++#define  GRC_LCLCTRL_INT_ACTIVE		0x00000001
++#define  GRC_LCLCTRL_CLEARINT		0x00000002
++#define  GRC_LCLCTRL_SETINT		0x00000004
++#define  GRC_LCLCTRL_INT_ON_ATTN	0x00000008
++#define  GRC_LCLCTRL_GPIO_INPUT0	0x00000100
++#define  GRC_LCLCTRL_GPIO_INPUT1	0x00000200
++#define  GRC_LCLCTRL_GPIO_INPUT2	0x00000400
++#define  GRC_LCLCTRL_GPIO_OE0		0x00000800
++#define  GRC_LCLCTRL_GPIO_OE1		0x00001000
++#define  GRC_LCLCTRL_GPIO_OE2		0x00002000
++#define  GRC_LCLCTRL_GPIO_OUTPUT0	0x00004000
++#define  GRC_LCLCTRL_GPIO_OUTPUT1	0x00008000
++#define  GRC_LCLCTRL_GPIO_OUTPUT2	0x00010000
++#define  GRC_LCLCTRL_EXTMEM_ENABLE	0x00020000
++#define  GRC_LCLCTRL_MEMSZ_MASK		0x001c0000
++#define  GRC_LCLCTRL_MEMSZ_256K		0x00000000
++#define  GRC_LCLCTRL_MEMSZ_512K		0x00040000
++#define  GRC_LCLCTRL_MEMSZ_1M		0x00080000
++#define  GRC_LCLCTRL_MEMSZ_2M		0x000c0000
++#define  GRC_LCLCTRL_MEMSZ_4M		0x00100000
++#define  GRC_LCLCTRL_MEMSZ_8M		0x00140000
++#define  GRC_LCLCTRL_MEMSZ_16M		0x00180000
++#define  GRC_LCLCTRL_BANK_SELECT	0x00200000
++#define  GRC_LCLCTRL_SSRAM_TYPE		0x00400000
++#define  GRC_LCLCTRL_AUTO_SEEPROM	0x01000000
++#define GRC_TIMER			0x0000680c
++#define GRC_RX_CPU_EVENT		0x00006810
++#define GRC_RX_TIMER_REF		0x00006814
++#define GRC_RX_CPU_SEM			0x00006818
++#define GRC_REMOTE_RX_CPU_ATTN		0x0000681c
++#define GRC_TX_CPU_EVENT		0x00006820
++#define GRC_TX_TIMER_REF		0x00006824
++#define GRC_TX_CPU_SEM			0x00006828
++#define GRC_REMOTE_TX_CPU_ATTN		0x0000682c
++#define GRC_MEM_POWER_UP		0x00006830 /* 64-bit */
++#define GRC_EEPROM_ADDR			0x00006838
++#define  EEPROM_ADDR_WRITE		0x00000000
++#define  EEPROM_ADDR_READ		0x80000000
++#define  EEPROM_ADDR_COMPLETE		0x40000000
++#define  EEPROM_ADDR_FSM_RESET		0x20000000
++#define  EEPROM_ADDR_DEVID_MASK		0x1c000000
++#define  EEPROM_ADDR_DEVID_SHIFT	26
++#define  EEPROM_ADDR_START		0x02000000
++#define  EEPROM_ADDR_CLKPERD_SHIFT	16
++#define  EEPROM_ADDR_ADDR_MASK		0x0000ffff
++#define  EEPROM_ADDR_ADDR_SHIFT		0
++#define  EEPROM_DEFAULT_CLOCK_PERIOD	0x60
++#define  EEPROM_CHIP_SIZE		(64 * 1024)
++#define GRC_EEPROM_DATA			0x0000683c
++#define GRC_EEPROM_CTRL			0x00006840
++#define GRC_MDI_CTRL			0x00006844
++#define GRC_SEEPROM_DELAY		0x00006848
++/* 0x684c --> 0x6c00 unused */
++
++/* 0x6c00 --> 0x7000 unused */
++
++/* NVRAM Control registers */
++#define NVRAM_CMD			0x00007000
++#define  NVRAM_CMD_RESET		 0x00000001
++#define  NVRAM_CMD_DONE			 0x00000008
++#define  NVRAM_CMD_GO			 0x00000010
++#define  NVRAM_CMD_WR			 0x00000020
++#define  NVRAM_CMD_RD			 0x00000000
++#define  NVRAM_CMD_ERASE		 0x00000040
++#define  NVRAM_CMD_FIRST		 0x00000080
++#define  NVRAM_CMD_LAST			 0x00000100
++#define NVRAM_STAT			0x00007004
++#define NVRAM_WRDATA			0x00007008
++#define NVRAM_ADDR			0x0000700c
++#define  NVRAM_ADDR_MSK			0x00ffffff
++#define NVRAM_RDDATA			0x00007010
++#define NVRAM_CFG1			0x00007014
++#define  NVRAM_CFG1_FLASHIF_ENAB	 0x00000001
++#define  NVRAM_CFG1_BUFFERED_MODE	 0x00000002
++#define  NVRAM_CFG1_PASS_THRU		 0x00000004
++#define  NVRAM_CFG1_BIT_BANG		 0x00000008
++#define  NVRAM_CFG1_COMPAT_BYPASS	 0x80000000
++#define NVRAM_CFG2			0x00007018
++#define NVRAM_CFG3			0x0000701c
++#define NVRAM_SWARB			0x00007020
++#define  SWARB_REQ_SET0			 0x00000001
++#define  SWARB_REQ_SET1			 0x00000002
++#define  SWARB_REQ_SET2			 0x00000004
++#define  SWARB_REQ_SET3			 0x00000008
++#define  SWARB_REQ_CLR0			 0x00000010
++#define  SWARB_REQ_CLR1			 0x00000020
++#define  SWARB_REQ_CLR2			 0x00000040
++#define  SWARB_REQ_CLR3			 0x00000080
++#define  SWARB_GNT0			 0x00000100
++#define  SWARB_GNT1			 0x00000200
++#define  SWARB_GNT2			 0x00000400
++#define  SWARB_GNT3			 0x00000800
++#define  SWARB_REQ0			 0x00001000
++#define  SWARB_REQ1			 0x00002000
++#define  SWARB_REQ2			 0x00004000
++#define  SWARB_REQ3			 0x00008000
++#define    NVRAM_BUFFERED_PAGE_SIZE	   264
++#define    NVRAM_BUFFERED_PAGE_POS	   9
++/* 0x7024 --> 0x7400 unused */
++
++/* 0x7400 --> 0x8000 unused */
++
++/* 32K Window into NIC internal memory */
++#define NIC_SRAM_WIN_BASE		0x00008000
++
++/* Offsets into first 32k of NIC internal memory. */
++#define NIC_SRAM_PAGE_ZERO		0x00000000
++#define NIC_SRAM_SEND_RCB		0x00000100 /* 16 * TG3_BDINFO_... */
++#define NIC_SRAM_RCV_RET_RCB		0x00000200 /* 16 * TG3_BDINFO_... */
++#define NIC_SRAM_STATS_BLK		0x00000300
++#define NIC_SRAM_STATUS_BLK		0x00000b00
++
++#define NIC_SRAM_FIRMWARE_MBOX		0x00000b50
++#define  NIC_SRAM_FIRMWARE_MBOX_MAGIC1	 0x4B657654
++#define  NIC_SRAM_FIRMWARE_MBOX_MAGIC2	 0x4861764b /* !dma on linkchg */
++
++#define NIC_SRAM_DATA_SIG		0x00000b54
++#define  NIC_SRAM_DATA_SIG_MAGIC	 0x4b657654 /* ascii for 'KevT' */
++
++#define NIC_SRAM_DATA_CFG			0x00000b58
++#define  NIC_SRAM_DATA_CFG_LED_MODE_MASK	 0x0000000c
++#define  NIC_SRAM_DATA_CFG_LED_MODE_UNKNOWN	 0x00000000
++#define  NIC_SRAM_DATA_CFG_LED_TRIPLE_SPD	 0x00000004
++#define  NIC_SRAM_DATA_CFG_LED_OPEN_DRAIN	 0x00000004
++#define  NIC_SRAM_DATA_CFG_LED_LINK_SPD		 0x00000008
++#define  NIC_SRAM_DATA_CFG_LED_OUTPUT		 0x00000008
++#define  NIC_SRAM_DATA_CFG_PHY_TYPE_MASK	 0x00000030
++#define  NIC_SRAM_DATA_CFG_PHY_TYPE_UNKNOWN	 0x00000000
++#define  NIC_SRAM_DATA_CFG_PHY_TYPE_COPPER	 0x00000010
++#define  NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER	 0x00000020
++#define  NIC_SRAM_DATA_CFG_WOL_ENABLE		 0x00000040
++#define  NIC_SRAM_DATA_CFG_ASF_ENABLE		 0x00000080
++#define  NIC_SRAM_DATA_CFG_EEPROM_WP		 0x00000100
++#define  NIC_SRAM_DATA_CFG_MINI_PCI		 0x00001000
++#define  NIC_SRAM_DATA_CFG_FIBER_WOL		 0x00004000
++
++#define NIC_SRAM_DATA_PHY_ID		0x00000b74
++#define  NIC_SRAM_DATA_PHY_ID1_MASK	 0xffff0000
++#define  NIC_SRAM_DATA_PHY_ID2_MASK	 0x0000ffff
++
++#define NIC_SRAM_FW_CMD_MBOX		0x00000b78
++#define  FWCMD_NICDRV_ALIVE		 0x00000001
++#define  FWCMD_NICDRV_PAUSE_FW		 0x00000002
++#define  FWCMD_NICDRV_IPV4ADDR_CHG	 0x00000003
++#define  FWCMD_NICDRV_IPV6ADDR_CHG	 0x00000004
++#define  FWCMD_NICDRV_FIX_DMAR		 0x00000005
++#define  FWCMD_NICDRV_FIX_DMAW		 0x00000006
++#define NIC_SRAM_FW_CMD_LEN_MBOX	0x00000b7c
++#define NIC_SRAM_FW_CMD_DATA_MBOX	0x00000b80
++#define NIC_SRAM_FW_ASF_STATUS_MBOX	0x00000c00
++#define NIC_SRAM_FW_DRV_STATE_MBOX	0x00000c04
++#define  DRV_STATE_START		 0x00000001
++#define  DRV_STATE_UNLOAD		 0x00000002
++#define  DRV_STATE_WOL			 0x00000003
++#define  DRV_STATE_SUSPEND		 0x00000004
++
++#define NIC_SRAM_FW_RESET_TYPE_MBOX	0x00000c08
++
++#define NIC_SRAM_MAC_ADDR_HIGH_MBOX	0x00000c14
++#define NIC_SRAM_MAC_ADDR_LOW_MBOX	0x00000c18
++
++#define NIC_SRAM_RX_MINI_BUFFER_DESC	0x00001000
++
++#define NIC_SRAM_DMA_DESC_POOL_BASE	0x00002000
++#define  NIC_SRAM_DMA_DESC_POOL_SIZE	 0x00002000
++#define NIC_SRAM_TX_BUFFER_DESC		0x00004000 /* 512 entries */
++#define NIC_SRAM_RX_BUFFER_DESC		0x00006000 /* 256 entries */
++#define NIC_SRAM_RX_JUMBO_BUFFER_DESC	0x00007000 /* 256 entries */
++#define NIC_SRAM_MBUF_POOL_BASE		0x00008000
++#define  NIC_SRAM_MBUF_POOL_SIZE96	 0x00018000
++#define  NIC_SRAM_MBUF_POOL_SIZE64	 0x00010000
++#define  NIC_SRAM_MBUF_POOL_BASE5705	0x00010000
++#define  NIC_SRAM_MBUF_POOL_SIZE5705	0x0000e000
++
++/* Currently this is fixed. */
++#define PHY_ADDR		0x01
++
++/* Tigon3 specific PHY MII registers. */
++#define  TG3_BMCR_SPEED1000		0x0040
++
++#define MII_TG3_CTRL			0x09 /* 1000-baseT control register */
++#define  MII_TG3_CTRL_ADV_1000_HALF	0x0100
++#define  MII_TG3_CTRL_ADV_1000_FULL	0x0200
++#define  MII_TG3_CTRL_AS_MASTER		0x0800
++#define  MII_TG3_CTRL_ENABLE_AS_MASTER	0x1000
++
++#define MII_TG3_EXT_CTRL		0x10 /* Extended control register */
++#define  MII_TG3_EXT_CTRL_LNK3_LED_MODE	0x0002
++#define  MII_TG3_EXT_CTRL_TBI		0x8000
++
++#define MII_TG3_EXT_STAT		0x11 /* Extended status register */
++#define  MII_TG3_EXT_STAT_LPASS		0x0100
++
++#define MII_TG3_DSP_RW_PORT		0x15 /* DSP coefficient read/write port */
++
++#define MII_TG3_DSP_ADDRESS		0x17 /* DSP address register */
++
++#define MII_TG3_AUX_CTRL		0x18 /* auxilliary control register */
++
++#define MII_TG3_AUX_STAT		0x19 /* auxilliary status register */
++#define MII_TG3_AUX_STAT_LPASS		0x0004
++#define MII_TG3_AUX_STAT_SPDMASK	0x0700
++#define MII_TG3_AUX_STAT_10HALF		0x0100
++#define MII_TG3_AUX_STAT_10FULL		0x0200
++#define MII_TG3_AUX_STAT_100HALF	0x0300
++#define MII_TG3_AUX_STAT_100_4		0x0400
++#define MII_TG3_AUX_STAT_100FULL	0x0500
++#define MII_TG3_AUX_STAT_1000HALF	0x0600
++#define MII_TG3_AUX_STAT_1000FULL	0x0700
++
++#define MII_TG3_ISTAT			0x1a /* IRQ status register */
++#define MII_TG3_IMASK			0x1b /* IRQ mask register */
++
++/* ISTAT/IMASK event bits */
++#define MII_TG3_INT_LINKCHG		0x0002
++#define MII_TG3_INT_SPEEDCHG		0x0004
++#define MII_TG3_INT_DUPLEXCHG		0x0008
++#define MII_TG3_INT_ANEG_PAGE_RX	0x0400
++
++/* XXX Add this to mii.h */
++#ifndef ADVERTISE_PAUSE
++#define ADVERTISE_PAUSE_CAP		0x0400
++#endif
++#ifndef ADVERTISE_PAUSE_ASYM
++#define ADVERTISE_PAUSE_ASYM		0x0800
++#endif
++#ifndef LPA_PAUSE
++#define LPA_PAUSE_CAP			0x0400
++#endif
++#ifndef LPA_PAUSE_ASYM
++#define LPA_PAUSE_ASYM			0x0800
++#endif
++
++/* There are two ways to manage the TX descriptors on the tigon3.
++ * Either the descriptors are in host DMA'able memory, or they
++ * exist only in the cards on-chip SRAM.  All 16 send bds are under
++ * the same mode, they may not be configured individually.
++ *
++ * The mode we use is controlled by TG3_FLAG_HOST_TXDS in tp->tg3_flags.
++ *
++ * To use host memory TX descriptors:
++ *	1) Set GRC_MODE_HOST_SENDBDS in GRC_MODE register.
++ *	   Make sure GRC_MODE_4X_NIC_SEND_RINGS is clear.
++ *	2) Allocate DMA'able memory.
++ *	3) In NIC_SRAM_SEND_RCB (of desired index) of on-chip SRAM:
++ *	   a) Set TG3_BDINFO_HOST_ADDR to DMA address of memory
++ *	      obtained in step 2
++ *	   b) Set TG3_BDINFO_NIC_ADDR to NIC_SRAM_TX_BUFFER_DESC.
++ *	   c) Set len field of TG3_BDINFO_MAXLEN_FLAGS to number
++ *            of TX descriptors.  Leave flags field clear.
++ *	4) Access TX descriptors via host memory.  The chip
++ *	   will refetch into local SRAM as needed when producer
++ *	   index mailboxes are updated.
++ *
++ * To use on-chip TX descriptors:
++ *	1) Set GRC_MODE_4X_NIC_SEND_RINGS in GRC_MODE register.
++ *	   Make sure GRC_MODE_HOST_SENDBDS is clear.
++ *	2) In NIC_SRAM_SEND_RCB (of desired index) of on-chip SRAM:
++ *	   a) Set TG3_BDINFO_HOST_ADDR to zero.
++ *	   b) Set TG3_BDINFO_NIC_ADDR to NIC_SRAM_TX_BUFFER_DESC
++ *	   c) TG3_BDINFO_MAXLEN_FLAGS is don't care.
++ *	3) Access TX descriptors directly in on-chip SRAM
++ *	   using normal {read,write}l().  (and not using
++ *         pointer dereferencing of ioremap()'d memory like
++ *	   the broken Broadcom driver does)
++ *
++ * Note that BDINFO_FLAGS_DISABLED should be set in the flags field of
++ * TG3_BDINFO_MAXLEN_FLAGS of all unused SEND_RCB indices.
++ */
++struct tg3_tx_buffer_desc {
++	uint32_t			addr_hi;
++	uint32_t			addr_lo;
++
++	uint32_t			len_flags;
++#define TXD_FLAG_TCPUDP_CSUM		0x0001
++#define TXD_FLAG_IP_CSUM		0x0002
++#define TXD_FLAG_END			0x0004
++#define TXD_FLAG_IP_FRAG		0x0008
++#define TXD_FLAG_IP_FRAG_END		0x0010
++#define TXD_FLAG_VLAN			0x0040
++#define TXD_FLAG_COAL_NOW		0x0080
++#define TXD_FLAG_CPU_PRE_DMA		0x0100
++#define TXD_FLAG_CPU_POST_DMA		0x0200
++#define TXD_FLAG_ADD_SRC_ADDR		0x1000
++#define TXD_FLAG_CHOOSE_SRC_ADDR	0x6000
++#define TXD_FLAG_NO_CRC			0x8000
++#define TXD_LEN_SHIFT			16
++
++	uint32_t			vlan_tag;
++#define TXD_VLAN_TAG_SHIFT		0
++#define TXD_MSS_SHIFT			16
++};
++
++#define TXD_ADDR			0x00UL /* 64-bit */
++#define TXD_LEN_FLAGS			0x08UL /* 32-bit (upper 16-bits are len) */
++#define TXD_VLAN_TAG			0x0cUL /* 32-bit (upper 16-bits are tag) */
++#define TXD_SIZE			0x10UL
++
++struct tg3_rx_buffer_desc {
++	uint32_t			addr_hi;
++	uint32_t			addr_lo;
++
++	uint32_t			idx_len;
++#define RXD_IDX_MASK	0xffff0000
++#define RXD_IDX_SHIFT	16
++#define RXD_LEN_MASK	0x0000ffff
++#define RXD_LEN_SHIFT	0
++
++	uint32_t			type_flags;
++#define RXD_TYPE_SHIFT	16
++#define RXD_FLAGS_SHIFT	0
++
++#define RXD_FLAG_END			0x0004
++#define RXD_FLAG_MINI			0x0800
++#define RXD_FLAG_JUMBO			0x0020
++#define RXD_FLAG_VLAN			0x0040
++#define RXD_FLAG_ERROR			0x0400
++#define RXD_FLAG_IP_CSUM		0x1000
++#define RXD_FLAG_TCPUDP_CSUM		0x2000
++#define RXD_FLAG_IS_TCP			0x4000
++
++	uint32_t			ip_tcp_csum;
++#define RXD_IPCSUM_MASK		0xffff0000
++#define RXD_IPCSUM_SHIFT	16
++#define RXD_TCPCSUM_MASK	0x0000ffff
++#define RXD_TCPCSUM_SHIFT	0
++
++	uint32_t			err_vlan;
++
++#define RXD_VLAN_MASK			0x0000ffff
++
++#define RXD_ERR_BAD_CRC			0x00010000
++#define RXD_ERR_COLLISION		0x00020000
++#define RXD_ERR_LINK_LOST		0x00040000
++#define RXD_ERR_PHY_DECODE		0x00080000
++#define RXD_ERR_ODD_NIBBLE_RCVD_MII	0x00100000
++#define RXD_ERR_MAC_ABRT		0x00200000
++#define RXD_ERR_TOO_SMALL		0x00400000
++#define RXD_ERR_NO_RESOURCES		0x00800000
++#define RXD_ERR_HUGE_FRAME		0x01000000
++#define RXD_ERR_MASK			0xffff0000
++
++	uint32_t			reserved;
++	uint32_t			opaque;
++#define RXD_OPAQUE_INDEX_MASK		0x0000ffff
++#define RXD_OPAQUE_INDEX_SHIFT		0
++#define RXD_OPAQUE_RING_STD		0x00010000
++#define RXD_OPAQUE_RING_JUMBO		0x00020000
++#define RXD_OPAQUE_RING_MINI		0x00040000
++#define RXD_OPAQUE_RING_MASK		0x00070000
++};
++
++struct tg3_ext_rx_buffer_desc {
++	struct {
++		uint32_t		addr_hi;
++		uint32_t		addr_lo;
++	}				addrlist[3];
++	uint32_t			len2_len1;
++	uint32_t			resv_len3;
++	struct tg3_rx_buffer_desc	std;
++};
++
++/* We only use this when testing out the DMA engine
++ * at probe time.  This is the internal format of buffer
++ * descriptors used by the chip at NIC_SRAM_DMA_DESCS.
++ */
++struct tg3_internal_buffer_desc {
++	uint32_t			addr_hi;
++	uint32_t			addr_lo;
++	uint32_t			nic_mbuf;
++	/* XXX FIX THIS */
++#if __BYTE_ORDER == __BIG_ENDIAN
++	uint16_t			cqid_sqid;
++	uint16_t			len;
++#else
++	uint16_t			len;
++	uint16_t			cqid_sqid;
++#endif
++	uint32_t			flags;
++	uint32_t			__cookie1;
++	uint32_t			__cookie2;
++	uint32_t			__cookie3;
++};
++
++#define TG3_HW_STATUS_SIZE		0x50
++struct tg3_hw_status {
++	uint32_t			status;
++#define SD_STATUS_UPDATED		0x00000001
++#define SD_STATUS_LINK_CHG		0x00000002
++#define SD_STATUS_ERROR			0x00000004
++
++	uint32_t			status_tag;
++
++#if __BYTE_ORDER == __BIG_ENDIAN
++	uint16_t			rx_consumer;
++	uint16_t			rx_jumbo_consumer;
++#else
++	uint16_t			rx_jumbo_consumer;
++	uint16_t			rx_consumer;
++#endif
++
++#if __BYTE_ORDER ==  __BIG_ENDIAN
++	uint16_t			reserved;
++	uint16_t			rx_mini_consumer;
++#else
++	uint16_t			rx_mini_consumer;
++	uint16_t			reserved;
++#endif
++	struct {
++#if __BYTE_ORDER ==  __BIG_ENDIAN
++		uint16_t		tx_consumer;
++		uint16_t		rx_producer;
++#else
++		uint16_t		rx_producer;
++		uint16_t		tx_consumer;
++#endif
++	}				idx[16];
++};
++
++typedef struct {
++	uint32_t high, low;
++} tg3_stat64_t;
++
++struct tg3_hw_stats {
++	uint8_t				__reserved0[0x400-0x300];
++
++	/* Statistics maintained by Receive MAC. */
++	tg3_stat64_t			rx_octets;
++	uint64_t			__reserved1;
++	tg3_stat64_t			rx_fragments;
++	tg3_stat64_t			rx_ucast_packets;
++	tg3_stat64_t			rx_mcast_packets;
++	tg3_stat64_t			rx_bcast_packets;
++	tg3_stat64_t			rx_fcs_errors;
++	tg3_stat64_t			rx_align_errors;
++	tg3_stat64_t			rx_xon_pause_rcvd;
++	tg3_stat64_t			rx_xoff_pause_rcvd;
++	tg3_stat64_t			rx_mac_ctrl_rcvd;
++	tg3_stat64_t			rx_xoff_entered;
++	tg3_stat64_t			rx_frame_too_long_errors;
++	tg3_stat64_t			rx_jabbers;
++	tg3_stat64_t			rx_undersize_packets;
++	tg3_stat64_t			rx_in_length_errors;
++	tg3_stat64_t			rx_out_length_errors;
++	tg3_stat64_t			rx_64_or_less_octet_packets;
++	tg3_stat64_t			rx_65_to_127_octet_packets;
++	tg3_stat64_t			rx_128_to_255_octet_packets;
++	tg3_stat64_t			rx_256_to_511_octet_packets;
++	tg3_stat64_t			rx_512_to_1023_octet_packets;
++	tg3_stat64_t			rx_1024_to_1522_octet_packets;
++	tg3_stat64_t			rx_1523_to_2047_octet_packets;
++	tg3_stat64_t			rx_2048_to_4095_octet_packets;
++	tg3_stat64_t			rx_4096_to_8191_octet_packets;
++	tg3_stat64_t			rx_8192_to_9022_octet_packets;
++
++	uint64_t			__unused0[37];
++
++	/* Statistics maintained by Transmit MAC. */
++	tg3_stat64_t			tx_octets;
++	uint64_t			__reserved2;
++	tg3_stat64_t			tx_collisions;
++	tg3_stat64_t			tx_xon_sent;
++	tg3_stat64_t			tx_xoff_sent;
++	tg3_stat64_t			tx_flow_control;
++	tg3_stat64_t			tx_mac_errors;
++	tg3_stat64_t			tx_single_collisions;
++	tg3_stat64_t			tx_mult_collisions;
++	tg3_stat64_t			tx_deferred;
++	uint64_t			__reserved3;
++	tg3_stat64_t			tx_excessive_collisions;
++	tg3_stat64_t			tx_late_collisions;
++	tg3_stat64_t			tx_collide_2times;
++	tg3_stat64_t			tx_collide_3times;
++	tg3_stat64_t			tx_collide_4times;
++	tg3_stat64_t			tx_collide_5times;
++	tg3_stat64_t			tx_collide_6times;
++	tg3_stat64_t			tx_collide_7times;
++	tg3_stat64_t			tx_collide_8times;
++	tg3_stat64_t			tx_collide_9times;
++	tg3_stat64_t			tx_collide_10times;
++	tg3_stat64_t			tx_collide_11times;
++	tg3_stat64_t			tx_collide_12times;
++	tg3_stat64_t			tx_collide_13times;
++	tg3_stat64_t			tx_collide_14times;
++	tg3_stat64_t			tx_collide_15times;
++	tg3_stat64_t			tx_ucast_packets;
++	tg3_stat64_t			tx_mcast_packets;
++	tg3_stat64_t			tx_bcast_packets;
++	tg3_stat64_t			tx_carrier_sense_errors;
++	tg3_stat64_t			tx_discards;
++	tg3_stat64_t			tx_errors;
++
++	uint64_t			__unused1[31];
++
++	/* Statistics maintained by Receive List Placement. */
++	tg3_stat64_t			COS_rx_packets[16];
++	tg3_stat64_t			COS_rx_filter_dropped;
++	tg3_stat64_t			dma_writeq_full;
++	tg3_stat64_t			dma_write_prioq_full;
++	tg3_stat64_t			rxbds_empty;
++	tg3_stat64_t			rx_discards;
++	tg3_stat64_t			rx_errors;
++	tg3_stat64_t			rx_threshold_hit;
++
++	uint64_t			__unused2[9];
++
++	/* Statistics maintained by Send Data Initiator. */
++	tg3_stat64_t			COS_out_packets[16];
++	tg3_stat64_t			dma_readq_full;
++	tg3_stat64_t			dma_read_prioq_full;
++	tg3_stat64_t			tx_comp_queue_full;
++
++	/* Statistics maintained by Host Coalescing. */
++	tg3_stat64_t			ring_set_send_prod_index;
++	tg3_stat64_t			ring_status_update;
++	tg3_stat64_t			nic_irqs;
++	tg3_stat64_t			nic_avoided_irqs;
++	tg3_stat64_t			nic_tx_threshold_hit;
++
++	uint8_t				__reserved4[0xb00-0x9c0];
++};
++
++enum phy_led_mode {
++	led_mode_auto,
++	led_mode_three_link,
++	led_mode_link10
++};
++
++#if 0
++/* 'mapping' is superfluous as the chip does not write into
++ * the tx/rx post rings so we could just fetch it from there.
++ * But the cache behavior is better how we are doing it now.
++ */
++struct ring_info {
++	struct sk_buff			*skb;
++	DECLARE_PCI_UNMAP_ADDR(mapping)
++};
++
++struct tx_ring_info {
++	struct sk_buff			*skb;
++	DECLARE_PCI_UNMAP_ADDR(mapping)
++	uint32_t			prev_vlan_tag;
++};
++#endif
++
++struct tg3_config_info {
++	uint32_t			flags;
++};
++
++struct tg3_link_config {
++	/* Describes what we're trying to get. */
++	uint32_t			advertising;
++#if 0
++	uint16_t			speed;
++	uint8_t				duplex;
++	uint8_t				autoneg;
++#define SPEED_INVALID		0xffff
++#define DUPLEX_INVALID		0xff
++#define AUTONEG_INVALID		0xff
++#endif
++
++	/* Describes what we actually have. */
++	uint8_t				active_speed;
++	uint8_t				active_duplex;
++
++	/* When we go in and out of low power mode we need
++	 * to swap with this state.
++	 */
++#if 0
++	int				phy_is_low_power;
++	uint16_t			orig_speed;
++	uint8_t				orig_duplex;
++	uint8_t				orig_autoneg;
++#endif
++};
++
++struct tg3_bufmgr_config {
++	uint32_t		mbuf_read_dma_low_water;
++	uint32_t		mbuf_mac_rx_low_water;
++	uint32_t		mbuf_high_water;
++
++	uint32_t		mbuf_read_dma_low_water_jumbo;
++	uint32_t		mbuf_mac_rx_low_water_jumbo;
++	uint32_t		mbuf_high_water_jumbo;
++
++	uint32_t		dma_low_water;
++	uint32_t		dma_high_water;
++};
++
++struct tg3 {
++#if 0
++	/* SMP locking strategy:
++	 *
++	 * lock: Held during all operations except TX packet
++	 *       processing.
++	 *
++	 * tx_lock: Held during tg3_start_xmit{,_4gbug} and tg3_tx
++	 *
++	 * If you want to shut up all asynchronous processing you must
++	 * acquire both locks, 'lock' taken before 'tx_lock'.  IRQs must
++	 * be disabled to take 'lock' but only softirq disabling is
++	 * necessary for acquisition of 'tx_lock'.
++	 */
++	spinlock_t			lock;
++	spinlock_t			tx_lock;
++#endif
++
++	uint32_t			tx_prod;
++#if 0
++	uint32_t			tx_cons;
++#endif
++	uint32_t			rx_rcb_ptr;
++	uint32_t			rx_std_ptr;
++#if 0
++	uint32_t			rx_jumbo_ptr;
++	spinlock_t			indirect_lock;
++
++	struct net_device_stats		net_stats;
++	struct net_device_stats		net_stats_prev;
++#endif
++	unsigned long			phy_crc_errors;
++
++#if 0
++	uint32_t			rx_offset;
++#endif
++	uint32_t			tg3_flags;
++#if 0
++#define TG3_FLAG_HOST_TXDS		0x00000001
++#endif
++#define TG3_FLAG_TXD_MBOX_HWBUG		0x00000002
++#define TG3_FLAG_RX_CHECKSUMS		0x00000004
++#define TG3_FLAG_USE_LINKCHG_REG	0x00000008
++#define TG3_FLAG_USE_MI_INTERRUPT	0x00000010
++#define TG3_FLAG_ENABLE_ASF		0x00000020
++#define TG3_FLAG_5701_REG_WRITE_BUG	0x00000040
++#define TG3_FLAG_POLL_SERDES		0x00000080
++#define TG3_FLAG_MBOX_WRITE_REORDER	0x00000100
++#define TG3_FLAG_PCIX_TARGET_HWBUG	0x00000200
++#define TG3_FLAG_WOL_SPEED_100MB	0x00000400
++#define TG3_FLAG_WOL_ENABLE		0x00000800
++#define TG3_FLAG_EEPROM_WRITE_PROT	0x00001000
++#define TG3_FLAG_NVRAM			0x00002000
++#define TG3_FLAG_NVRAM_BUFFERED		0x00004000
++#define TG3_FLAG_RX_PAUSE		0x00008000
++#define TG3_FLAG_TX_PAUSE		0x00010000
++#define TG3_FLAG_PCIX_MODE		0x00020000
++#define TG3_FLAG_PCI_HIGH_SPEED		0x00040000
++#define TG3_FLAG_PCI_32BIT		0x00080000
++#define TG3_FLAG_NO_TX_PSEUDO_CSUM	0x00100000
++#define TG3_FLAG_NO_RX_PSEUDO_CSUM	0x00200000
++#define TG3_FLAG_SERDES_WOL_CAP		0x00400000
++#define TG3_FLAG_JUMBO_ENABLE		0x00800000
++#define TG3_FLAG_10_100_ONLY		0x01000000
++#define TG3_FLAG_PAUSE_AUTONEG		0x02000000
++#define TG3_FLAG_PAUSE_RX		0x04000000
++#define TG3_FLAG_PAUSE_TX		0x08000000
++#define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000
++#define TG3_FLAG_GOT_SERDES_FLOWCTL	0x20000000
++#define TG3_FLAG_SPLIT_MODE		0x40000000
++#define TG3_FLAG_INIT_COMPLETE		0x80000000
++
++	uint32_t			tg3_flags2;
++#define TG3_FLG2_RESTART_TIMER		0x00000001
++#define TG3_FLG2_SUN_5704		0x00000002
++#define TG3_FLG2_NO_ETH_WIRE_SPEED	0x00000004
++#define TG3_FLG2_IS_5788		0x00000008
++#define TG3_FLG2_MAX_RXPEND_64		0x00000010
++#define TG3_FLG2_TSO_CAPABLE		0x00000020
++
++
++
++	uint32_t			split_mode_max_reqs;
++#define SPLIT_MODE_5704_MAX_REQ		3
++
++#if 0
++	struct timer_list		timer;
++	uint16_t			timer_counter;
++	uint16_t			timer_multiplier;
++	uint32_t			timer_offset;
++	uint16_t			asf_counter;
++	uint16_t			asf_multiplier;
++#endif
++
++	struct tg3_link_config		link_config;
++	struct tg3_bufmgr_config	bufmgr_config;
++
++#if 0
++	uint32_t			rx_pending;
++	uint32_t			rx_jumbo_pending;
++	uint32_t			tx_pending;
++#endif
++
++	/* cache h/w values, often passed straight to h/w */
++	uint32_t			rx_mode;
++	uint32_t			tx_mode;
++	uint32_t			mac_mode;
++	uint32_t			mi_mode;
++	uint32_t			misc_host_ctrl;
++	uint32_t			grc_mode;
++	uint32_t			grc_local_ctrl;
++	uint32_t			dma_rwctrl;
++#if 0
++	uint32_t			coalesce_mode;
++#endif
++
++	/* PCI block */
++	uint16_t			pci_chip_rev_id;
++#if 0
++	uint8_t				pci_cacheline_sz;
++	uint8_t				pci_lat_timer;
++	uint8_t				pci_hdr_type;
++	uint8_t				pci_bist;
++#endif
++	uint32_t			pci_cfg_state[64 / sizeof(uint32_t)];
++
++	int				pm_cap;
++
++	/* PHY info */
++	uint32_t			phy_id;
++#define PHY_ID_MASK			0xfffffff0
++#define PHY_ID_BCM5400			0x60008040
++#define PHY_ID_BCM5401			0x60008050
++#define PHY_ID_BCM5411			0x60008070
++#define PHY_ID_BCM5701			0x60008110
++#define PHY_ID_BCM5703			0x60008160
++#define PHY_ID_BCM5704			0x60008190
++#define PHY_ID_BCM5705			0x600081a0
++#define PHY_ID_BCM8002			0x60010140
++#define PHY_ID_SERDES			0xfeedbee0
++#define PHY_ID_INVALID			0xffffffff
++#define PHY_ID_REV_MASK			0x0000000f
++#define PHY_REV_BCM5401_B0		0x1
++#define PHY_REV_BCM5401_B2		0x3
++#define PHY_REV_BCM5401_C0		0x6
++#define PHY_REV_BCM5411_X0		0x1 /* Found on Netgear GA302T */
++
++	enum phy_led_mode		led_mode;
++
++	char				board_part_number[24];
++	uint32_t			nic_sram_data_cfg;
++	uint32_t			pci_clock_ctrl;
++#if 0
++	struct pci_device		*pdev_peer;
++#endif
++
++	/* This macro assumes the passed PHY ID is already masked
++	 * with PHY_ID_MASK.
++	 */
++#define KNOWN_PHY_ID(X)		\
++	((X) == PHY_ID_BCM5400 || (X) == PHY_ID_BCM5401 || \
++	 (X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \
++	 (X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \
++	 (X) == PHY_ID_BCM5705 || \
++	 (X) == PHY_ID_BCM8002 || (X) == PHY_ID_SERDES)
++
++	unsigned long			regs;
++	struct pci_device		*pdev;
++	struct nic			*nic;
++#if 0
++	struct net_device		*dev;
++#endif
++#if TG3_VLAN_TAG_USED
++	struct vlan_group		*vlgrp;
++#endif
++
++	struct tg3_rx_buffer_desc	*rx_std;
++#if 0
++	struct ring_info		*rx_std_buffers;
++	dma_addr_t			rx_std_mapping;
++	struct tg3_rx_buffer_desc	*rx_jumbo;
++	struct ring_info		*rx_jumbo_buffers;
++	dma_addr_t			rx_jumbo_mapping;
++#endif
++
++	struct tg3_rx_buffer_desc	*rx_rcb;
++#if 0
++	dma_addr_t			rx_rcb_mapping;
++#endif
++
++	/* TX descs are only used if TG3_FLAG_HOST_TXDS is set. */
++	struct tg3_tx_buffer_desc	*tx_ring;
++#if 0
++	struct tx_ring_info		*tx_buffers;
++	dma_addr_t			tx_desc_mapping;
++#endif
++
++	struct tg3_hw_status		*hw_status;
++#if 0
++	dma_addr_t			status_mapping;
++#endif
++#if 0
++	uint32_t			msg_enable;
++#endif
++
++	struct tg3_hw_stats		*hw_stats;
++#if 0
++	dma_addr_t			stats_mapping;
++#endif
++
++	int				carrier_ok;
++	uint16_t			subsystem_vendor;
++	uint16_t			subsystem_device;
++};
++
++#endif /* !(_T3_H) */
+diff -Naur grub-0.97.orig/netboot/tiara.c grub-0.97/netboot/tiara.c
+--- grub-0.97.orig/netboot/tiara.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/tiara.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1,255 +0,0 @@
+-/**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-
+-TIARA (Fujitsu Etherstar) NIC driver for Etherboot
+-Copyright (c) Ken Yap 1998
+-
+-Information gleaned from:
+-
+-TIARA.ASM Packet driver by Brian Fisher, Queens U, Kingston, Ontario
+-Fujitsu MB86960 spec sheet (different chip but same family)
+-***************************************************************************/
+-
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+-/* to get some global routines like printf */
+-#include "etherboot.h"
+-/* to get the interface to the body of the program */
+-#include "nic.h"
+-#include "cards.h"
+-
+-/*
+-	EtherStar I/O Register offsets
+-*/
+-
+-/* Offsets of registers */
+-#define	DLCR_XMIT_STAT	0x00
+-#define	DLCR_XMIT_MASK	0x01
+-#define	DLCR_RECV_STAT	0x02
+-#define	DLCR_RECV_MASK	0x03
+-#define	DLCR_XMIT_MODE	0x04
+-#define	DLCR_RECV_MODE	0x05
+-#define	DLCR_ENABLE	0x06
+-#define	DLCR_TDR_LOW	0x07
+-#define	DLCR_NODE_ID	0x08
+-#define	DLCR_TDR_HIGH	0x0F
+-#define	BMPR_MEM_PORT	0x10
+-#define	BMPR_PKT_LEN	0x12
+-#define	BMPR_DMA_ENABLE	0x14
+-#define	PROM_ID		0x18
+-
+-#define	TMST		0x80
+-#define	TMT_OK		0x80
+-#define	TMT_16COLL	0x02
+-#define	BUF_EMPTY	0x40
+-
+-#define	CARD_DISABLE	0x80	/* written to DLCR_ENABLE to disable card */
+-#define	CARD_ENABLE	0	/* written to DLCR_ENABLE to enable card */
+-
+-#define	CLEAR_STATUS	0x0F	/* used to clear status info */
+-/*
+-	00001111B
+-	!!!!!!!!--------
+-	!!!!!!!+--------CLEAR BUS WRITE ERROR
+-	!!!!!!+---------CLEAR 16 COLLISION
+-	!!!!!+----------CLEAR COLLISION
+-	!!!!+-----------CLEAR UNDERFLOW
+-	!!!+------------NC
+-	!!+-------------NC
+-	!+--------------NC
+-	+---------------NC
+-*/
+-
+-#define	NO_TX_IRQS	0	/* written to clear transmit IRQs */
+-
+-#define	CLR_RCV_STATUS	0xCF	/* clears receive status */
+-
+-#define	EN_RCV_IRQS	0x80	/* enable receive interrupts */
+-/*
+-	10000000B
+-	!!!!!!!!--------
+-	!!!!!!!+--------ENABLE OVERFLOW
+-	!!!!!!+---------ENABLE CRC
+-	!!!!!+----------ENABLE ALIGN
+-	!!!!+-----------ENABLE SHORT PKT
+-	!!!+------------DISABLE REMOTE RESET
+-	!!+-------------RESERVED
+-	!+--------------RESERVED
+-	+---------------ENABLE PKT READY
+-*/
+-
+-#define	XMIT_MODE	0x02
+-/*
+-	00000010B
+-	!!!!!!!!---------ENABLE CARRIER DETECT
+-	!!!!!!!+---------DISABLE LOOPBACK
+-*/
+-
+-#define	RECV_MODE	0x02
+-/*
+-	00000010B
+-	!!!!!!!!---------ACCEPT ALL PACKETS
+-	!!!!!!!+---------ACCEPT PHYSICAL, MULTICAST, AND
+-	!!!!!!+----------BROADCAST PACKETS
+-	!!!!!+-----------DISABLE REMOTE RESET
+-	!!!!+------------DISABLE SHORT PACKETS
+-	!!!+-------------USE 6 BYTE ADDRESS
+-	!!+--------------NC
+-	!+---------------NC
+-	+----------------DISABLE CRC TEST MODE
+-*/
+-
+-/* NIC specific static variables go here */
+-
+-static unsigned short	ioaddr;
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void tiara_reset(struct nic *nic)
+-{
+-	int		i;
+-
+-	outb(CARD_DISABLE, ioaddr + DLCR_ENABLE);
+-	outb(CLEAR_STATUS, ioaddr + DLCR_XMIT_STAT);
+-	outb(NO_TX_IRQS, ioaddr + DLCR_XMIT_MASK);
+-	outb(CLR_RCV_STATUS, ioaddr + DLCR_RECV_STAT);
+-	outb(XMIT_MODE, ioaddr + DLCR_XMIT_MODE);
+-	outb(RECV_MODE, ioaddr + DLCR_RECV_MODE);
+-	/* Vacuum recv buffer */
+-	while ((inb(ioaddr + DLCR_RECV_MODE) & BUF_EMPTY) == 0)
+-		inb(ioaddr + BMPR_MEM_PORT);
+-	/* Set node address */
+-	for (i = 0; i < ETH_ALEN; ++i)
+-		outb(nic->node_addr[i], ioaddr + DLCR_NODE_ID + i);
+-	outb(CLR_RCV_STATUS, ioaddr + DLCR_RECV_STAT);
+-	outb(CARD_ENABLE, ioaddr + DLCR_ENABLE);
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int tiara_poll(struct nic *nic)
+-{
+-	unsigned int		len;
+-
+-	if (inb(ioaddr + DLCR_RECV_MODE) & BUF_EMPTY)
+-		return (0);
+-	/* Ack packet */
+-	outw(CLR_RCV_STATUS, ioaddr + DLCR_RECV_STAT);
+-	len = inw(ioaddr + BMPR_MEM_PORT);		/* throw away status */
+-	len = inw(ioaddr + BMPR_MEM_PORT);
+-	/* Drop overlength packets */
+-	if (len > ETH_FRAME_LEN)
+-		return (0);		/* should we drain the buffer? */
+-	insw(ioaddr + BMPR_MEM_PORT, nic->packet, len / 2);
+-	/* If it's our own, drop it */
+-	if (memcmp(nic->packet + ETH_ALEN, nic->node_addr, ETH_ALEN) == 0)
+-		return (0);
+-	nic->packetlen = len;
+-	return (1);
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void tiara_transmit(
+-struct nic *nic,
+-const char *d,			/* Destination */
+-unsigned int t,			/* Type */
+-unsigned int s,			/* size */
+-const char *p)			/* Packet */
+-{
+-	unsigned int	len;
+-	unsigned long	time;
+-
+-	len = s + ETH_HLEN;
+-	if (len < ETH_ZLEN)
+-		len = ETH_ZLEN;
+-	t = htons(t);
+-	outsw(ioaddr + BMPR_MEM_PORT, d, ETH_ALEN / 2);
+-	outsw(ioaddr + BMPR_MEM_PORT, nic->node_addr, ETH_ALEN / 2);
+-	outw(t, ioaddr + BMPR_MEM_PORT);
+-	outsw(ioaddr + BMPR_MEM_PORT, p, s / 2);
+-	if (s & 1)					/* last byte */
+-		outb(p[s-1], ioaddr + BMPR_MEM_PORT);
+-	while (s++ < ETH_ZLEN - ETH_HLEN)	/* pad */
+-		outb(0, ioaddr + BMPR_MEM_PORT);
+-	outw(len | (TMST << 8), ioaddr + BMPR_PKT_LEN);
+-	/* wait for transmit complete */
+-	time = currticks() + TICKS_PER_SEC;		/* wait one second */
+-	while (currticks() < time && (inb(ioaddr) & (TMT_OK|TMT_16COLL)) == 0)
+-		;
+-	if ((inb(ioaddr) & (TMT_OK|TMT_16COLL)) == 0)
+-		printf("Tiara timed out on transmit\n");
+-	/* Do we need to ack the transmit? */
+-}
+-
+-/**************************************************************************
+-DISABLE - Turn off ethernet interface
+-***************************************************************************/
+-static void tiara_disable(struct nic *nic)
+-{
+-	/* Apparently only a power down can do this properly */
+-	outb(CARD_DISABLE, ioaddr + DLCR_ENABLE);
+-}
+-
+-static int tiara_probe1(struct nic *nic)
+-{
+-	/* Hope all the Tiara cards have this vendor prefix */
+-	static char	vendor_prefix[] = { 0x08, 0x00, 0x1A };
+-	static char	all_ones[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+-	int		i;
+-
+-	for (i = 0; i < ETH_ALEN; ++i)
+-		nic->node_addr[i] = inb(ioaddr + PROM_ID + i);
+-	if (memcmp(nic->node_addr, vendor_prefix, sizeof(vendor_prefix)) != 0)
+-		return (0);
+-	if (memcmp(nic->node_addr, all_ones, sizeof(all_ones)) == 0)
+-		return (0);
+-	printf("\nTiara ioaddr %#hX, addr %!\n", ioaddr, nic->node_addr);
+-	return (1);
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-***************************************************************************/
+-struct nic *tiara_probe(struct nic *nic, unsigned short *probe_addrs)
+-{
+-	/* missing entries are addresses usually already used */
+-	static unsigned short	io_addrs[] = {
+-		0x100, 0x120, 0x140, 0x160,
+-		0x180, 0x1A0, 0x1C0, 0x1E0,
+-		0x200, 0x220, 0x240, /*Par*/
+-		0x280, 0x2A0, 0x2C0, /*Ser*/
+-		0x300, 0x320, 0x340, /*Par*/
+-		0x380, /*Vid,Par*/ 0x3C0, /*Ser*/
+-		0x0
+-	};
+-	unsigned short		*p;
+-
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	if (probe_addrs == 0)
+-		probe_addrs = io_addrs;
+-	for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
+-		if (tiara_probe1(nic))
+-			break;
+-	/* if board found */
+-	if (ioaddr != 0)
+-	{
+-		tiara_reset(nic);
+-		/* point to NIC specific routines */
+-		nic->reset = tiara_reset;
+-		nic->poll = tiara_poll;
+-		nic->transmit = tiara_transmit;
+-		nic->disable = tiara_disable;
+-		return nic;
+-	}
+-	else
+-		return (0);
+-}
+diff -Naur grub-0.97.orig/netboot/timer.c grub-0.97/netboot/timer.c
+--- grub-0.97.orig/netboot/timer.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/timer.c	2005-08-31 19:03:35.000000000 +0000
+@@ -6,122 +6,24 @@
+  * published by the Free Software Foundation; either version 2, or (at
+  * your option) any later version.
+  */
+-
+-#include	"etherboot.h"
++#include        "grub.h"
+ #include	"timer.h"
+ 
+-void load_timer2(unsigned int ticks)
+-{
+-	/* Set up the timer gate, turn off the speaker */
+-	outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
+-	outb(TIMER2_SEL|WORD_ACCESS|MODE0|BINARY_COUNT, TIMER_MODE_PORT);
+-	outb(ticks & 0xFF, TIMER2_PORT);
+-	outb(ticks >> 8, TIMER2_PORT);
+-}
+-
+-#if defined(CONFIG_TSC_CURRTICKS)
+-#define rdtsc(low,high) \
+-     __asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high))
+-
+-#define rdtscll(val) \
+-     __asm__ __volatile__ ("rdtsc" : "=A" (val))
+-
+-
+-#define HZ TICKS_PER_SEC
+-#define CLOCK_TICK_RATE	1193180U /* Underlying HZ */
+-/* LATCH is used in the interval timer and ftape setup. */
+-#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
++/* Machine Independant timer helper functions */
+ 
+-
+-/* ------ Calibrate the TSC ------- 
+- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+- * Too much 64-bit arithmetic here to do this cleanly in C, and for
+- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+- * output busy loop as low as possible. We avoid reading the CTC registers
+- * directly because of the awkward 8-bit access mechanism of the 82C54
+- * device.
+- */
+-
+-#define CALIBRATE_LATCH	(5 * LATCH)
+-
+-static unsigned long long calibrate_tsc(void)
++void mdelay(unsigned int msecs)
+ {
+-	/* Set the Gate high, disable speaker */
+-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+-
+-	/*
+-	 * Now let's take care of CTC channel 2
+-	 *
+-	 * Set the Gate high, program CTC channel 2 for mode 0,
+-	 * (interrupt on terminal count mode), binary count,
+-	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+-	 */
+-	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
+-	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+-	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
+-
+-	{
+-		unsigned long startlow, starthigh;
+-		unsigned long endlow, endhigh;
+-		unsigned long count;
+-
+-		rdtsc(startlow,starthigh);
+-		count = 0;
+-		do {
+-			count++;
+-		} while ((inb(0x61) & 0x20) == 0);
+-		rdtsc(endlow,endhigh);
+-
+-		/* Error: ECTCNEVERSET */
+-		if (count <= 1)
+-			goto bad_ctc;
+-
+-		/* 64-bit subtract - gcc just messes up with long longs */
+-		__asm__("subl %2,%0\n\t"
+-			"sbbl %3,%1"
+-			:"=a" (endlow), "=d" (endhigh)
+-			:"g" (startlow), "g" (starthigh),
+-			 "0" (endlow), "1" (endhigh));
+-
+-		/* Error: ECPUTOOFAST */
+-		if (endhigh)
+-			goto bad_ctc;
+-
+-		endlow /= 5;
+-		return endlow;
++	unsigned int i;
++	for(i = 0; i < msecs; i++) {
++		udelay(1000);
++		poll_interruptions();
+ 	}
+-
+-	/*
+-	 * The CTC wasn't reliable: we got a hit on the very first read,
+-	 * or the CPU was so fast/slow that the quotient wouldn't fit in
+-	 * 32 bits..
+-	 */
+-bad_ctc:
+-	printf("bad_ctc\n");
+-	return 0;
+ }
+ 
+-
+-unsigned long currticks(void)
++void waiton_timer2(unsigned int ticks)
+ {
+-	static unsigned long clocks_per_tick;
+-	unsigned long clocks_high, clocks_low;
+-	unsigned long currticks;
+-	if (!clocks_per_tick) {
+-		clocks_per_tick = calibrate_tsc();
+-		printf("clocks_per_tick = %d\n", clocks_per_tick);
++	load_timer2(ticks);
++	while(timer2_running()) {
++		poll_interruptions();
+ 	}
+-
+-	/* Read the Time Stamp Counter */
+-	rdtsc(clocks_low, clocks_high);
+-
+-	/* currticks = clocks / clocks_per_tick; */
+-	__asm__("divl %1"
+-		:"=a" (currticks)
+-		:"r" (clocks_per_tick), "0" (clocks_low), "d" (clocks_high));
+-
+-
+-	return currticks;
+ }
+-
+-#endif /* RTC_CURRTICKS */
+diff -Naur grub-0.97.orig/netboot/timer.h grub-0.97/netboot/timer.h
+--- grub-0.97.orig/netboot/timer.h	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/timer.h	2005-08-31 19:03:35.000000000 +0000
+@@ -36,7 +36,8 @@
+ #define	BCD_COUNT	0x01
+ 
+ /* Timers tick over at this rate */
+-#define	TICKS_PER_MS	1193
++#define CLOCK_TICK_RATE	1193180U
++#define	TICKS_PER_MS	(CLOCK_TICK_RATE/1000)
+ 
+ /* Parallel Peripheral Controller Port B */
+ #define	PPC_PORTB	0x61
+@@ -49,16 +50,19 @@
+ /* Ticks must be between 0 and 65535 (0 == 65536)
+    because it is a 16 bit counter */
+ extern void load_timer2(unsigned int ticks);
+-extern inline int timer2_running(void)
+-{
+-	return ((inb(PPC_PORTB) & PPCB_T2OUT) == 0);
+-}
+-
+-extern inline void waiton_timer2(unsigned int ticks)
+-{
+-	load_timer2(ticks);
+-	while ((inb(PPC_PORTB) & PPCB_T2OUT) == 0)
+-		;
+-}
++extern inline int timer2_running(void);
++extern void waiton_timer2(unsigned int ticks);
++extern void __load_timer2(unsigned int ticks);
++
++extern void setup_timers(void);
++extern void ndelay(unsigned int nsecs);
++extern void udelay(unsigned int usecs);
++extern void mdelay(unsigned int msecs);
++//extern unsigned long currticks(void);
++
++struct timeval {
++	long tv_sec;
++	long tv_usec;
++};
+ 
+ #endif	/* TIMER_H */
+diff -Naur grub-0.97.orig/netboot/tlan.c grub-0.97/netboot/tlan.c
+--- grub-0.97.orig/netboot/tlan.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/tlan.c	2005-09-01 00:05:20.000000000 +0000
+@@ -1,3746 +1,1814 @@
++#define EB51
++
++#ifdef EB50
++#define __unused __attribute__((unused))
++#endif
++
+ /**************************************************************************
+-Etherboot -  BOOTP/TFTP Bootstrap Program
+-TLAN driver for Etherboot
++*
++*    tlan.c -- Etherboot device driver for the Texas Instruments ThunderLAN
++*    Written 2003-2003 by Timothy Legge <tlegge@rogers.com>
++*
++*    This program is free software; you can redistribute it and/or modify
++*    it under the terms of the GNU General Public License as published by
++*    the Free Software Foundation; either version 2 of the License, or
++*    (at your option) any later version.
++*
++*    This program is distributed in the hope that it will be useful,
++*    but WITHOUT ANY WARRANTY; without even the implied warranty of
++*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++*    GNU General Public License for more details.
++*
++*    You should have received a copy of the GNU General Public License
++*    along with this program; if not, write to the Free Software
++*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*
++*    Portions of this code based on:
++*	lan.c: Linux ThunderLan Driver:
++*
++*	by James Banks
++*
++*  	(C) 1997-1998 Caldera, Inc.
++*	(C) 1998 James Banks
++*	(C) 1999-2001 Torben Mathiasen
++*	(C) 2002 Samuel Chessman
++*
++*    REVISION HISTORY:
++*    ================
++*    v1.0	07-08-2003	timlegge	Initial not quite working version
++*    v1.1	07-27-2003	timlegge	Sync 5.0 and 5.1 versions
++*    v1.2	08-19-2003	timlegge	Implement Multicast Support
++*    v1.3	08-23-2003	timlegge	Fix the transmit Function
++*    v1.4	01-17-2004	timlegge	Initial driver output cleanup    
++*    
++*    Indent Options: indent -kr -i8
+ ***************************************************************************/
+ 
+-/*
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation; either version 2, or (at
+- * your option) any later version.
+- */
+-
+ /* to get some global routines like printf */
+ #include "etherboot.h"
+ /* to get the interface to the body of the program */
+ #include "nic.h"
+ /* to get the PCI support functions, if this is a PCI NIC */
+ #include "pci.h"
+-/* to get our own prototype */
+-#include "cards.h"
+-
+-	/*****************************************************************
+-	 * TLan Definitions
+-	 *
+-	 ****************************************************************/
++#include "timer.h"
++#include "tlan.h"
+ 
+-#define TLAN_MIN_FRAME_SIZE	64
+-#define TLAN_MAX_FRAME_SIZE	1600
++#define drv_version "v1.4"
++#define drv_date "01-17-2004"
+ 
+-#define TLAN_NUM_RX_LISTS	32
+-#define TLAN_NUM_TX_LISTS	64
++/* NIC specific static variables go here */
++#define HZ 100
++#define TX_TIME_OUT	  (6*HZ)
+ 
+-#define TLAN_IGNORE		0
+-#define TLAN_RECORD		1
++#ifdef EB50
++#define	cpu_to_le32(val) (val)
++#define	le32_to_cpu(val) (val)
++#define	virt_to_bus(x) ((unsigned long) x)
++#define	bus_to_virt(x) ((unsigned long) x)
++#endif
+ 
+-#define TLAN_DBG(lvl, format, args...)	if (debug&lvl) printf("TLAN: " format, ##args );
+-#define TLAN_DEBUG_GNRL		0x0001
+-#define TLAN_DEBUG_TX		0x0002
+-#define TLAN_DEBUG_RX		0x0004 
+-#define TLAN_DEBUG_LIST		0x0008
+-#define TLAN_DEBUG_PROBE	0x0010
++/* Condensed operations for readability. */
++#define virt_to_le32desc(addr)  cpu_to_le32(virt_to_bus(addr))
++#define le32desc_to_virt(addr)  bus_to_virt(le32_to_cpu(addr))
+ 
+-#define MAX_TLAN_BOARDS		8	 /* Max number of boards installed at a time */
+ 
+-	/*****************************************************************
+-	 * Device Identification Definitions
+-	 *
+-	 ****************************************************************/
+-		
+-#define PCI_DEVICE_ID_NETELLIGENT_10_T2			0xB012
+-#define PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100	0xB030
+-#ifndef PCI_DEVICE_ID_OLICOM_OC2183
+-#define PCI_DEVICE_ID_OLICOM_OC2183			0x0013
+-#endif
+-#ifndef PCI_DEVICE_ID_OLICOM_OC2325
+-#define PCI_DEVICE_ID_OLICOM_OC2325			0x0012
+-#endif
+-#ifndef PCI_DEVICE_ID_OLICOM_OC2326
+-#define PCI_DEVICE_ID_OLICOM_OC2326			0x0014
+-#endif
+-#define TLAN_ADAPTER_NONE		0x00000000
+-#define TLAN_ADAPTER_UNMANAGED_PHY	0x00000001
+-#define TLAN_ADAPTER_BIT_RATE_PHY	0x00000002
+-#define TLAN_ADAPTER_USE_INTERN_10	0x00000004
+-#define TLAN_ADAPTER_ACTIVITY_LED	0x00000008
+-#define TLAN_SPEED_DEFAULT	0
+-#define TLAN_SPEED_10		10
+-#define TLAN_SPEED_100		100
+-#define TLAN_DUPLEX_DEFAULT	0
+-#define TLAN_DUPLEX_HALF	1
+-#define TLAN_DUPLEX_FULL	2
+-#define TLAN_BUFFERS_PER_LIST	10
+-#define TLAN_LAST_BUFFER	0x80000000
+-#define TLAN_CSTAT_UNUSED	0x8000
+-#define TLAN_CSTAT_FRM_CMP	0x4000
+-#define TLAN_CSTAT_READY	0x3000
+-#define TLAN_CSTAT_EOC		0x0800
+-#define TLAN_CSTAT_RX_ERROR	0x0400
+-#define TLAN_CSTAT_PASS_CRC	0x0200
+-#define TLAN_CSTAT_DP_PR	0x0100
+-
+-	/*****************************************************************
+-	 * PHY definitions
+-	 *
+-	 ****************************************************************/
+-
+-#define TLAN_PHY_MAX_ADDR	0x1F
+-#define TLAN_PHY_NONE		0x20
+-
+-	/*****************************************************************
+-	 * TLan Driver Timer Definitions
+-	 *
+-	 ****************************************************************/
+-
+-#define TLAN_TIMER_LINK_BEAT		1
+-#define TLAN_TIMER_ACTIVITY		2
+-#define TLAN_TIMER_PHY_PDOWN		3
+-#define TLAN_TIMER_PHY_PUP		4
+-#define TLAN_TIMER_PHY_RESET		5
+-#define TLAN_TIMER_PHY_START_LINK	6
+-#define TLAN_TIMER_PHY_FINISH_AN	7
+-#define TLAN_TIMER_FINISH_RESET		8
+-#define TLAN_TIMER_ACT_DELAY		(HZ/10)
+-
+-	/*****************************************************************
+-	 * TLan Driver Eeprom Definitions
+-	 *
+-	 ****************************************************************/
+-
+-#define TLAN_EEPROM_ACK		0
+-#define TLAN_EEPROM_STOP	1
+-
+-	/*****************************************************************
+-	 * Host Register Offsets and Contents
+-	 *
+-	 ****************************************************************/
+-
+-#define TLAN_HOST_CMD			0x00
+-#define 	TLAN_HC_GO		0x80000000
+-#define		TLAN_HC_STOP		0x40000000
+-#define		TLAN_HC_ACK		0x20000000
+-#define		TLAN_HC_CS_MASK		0x1FE00000
+-#define		TLAN_HC_EOC		0x00100000
+-#define		TLAN_HC_RT		0x00080000
+-#define		TLAN_HC_NES		0x00040000
+-#define		TLAN_HC_AD_RST		0x00008000
+-#define		TLAN_HC_LD_TMR		0x00004000
+-#define		TLAN_HC_LD_THR		0x00002000
+-#define		TLAN_HC_REQ_INT		0x00001000
+-#define		TLAN_HC_INT_OFF		0x00000800
+-#define		TLAN_HC_INT_ON		0x00000400
+-#define		TLAN_HC_AC_MASK		0x000000FF
+-#define TLAN_CH_PARM			0x04
+-#define TLAN_DIO_ADR			0x08
+-#define		TLAN_DA_ADR_INC		0x8000
+-#define		TLAN_DA_RAM_ADR		0x4000
+-#define TLAN_HOST_INT			0x0A
+-#define		TLAN_HI_IV_MASK		0x1FE0
+-#define		TLAN_HI_IT_MASK		0x001C
+-#define TLAN_DIO_DATA			0x0C
+-
+-/* ThunderLAN Internal Register DIO Offsets */
+-
+-#define TLAN_NET_CMD			0x00
+-#define		TLAN_NET_CMD_NRESET	0x80
+-#define		TLAN_NET_CMD_NWRAP	0x40
+-#define		TLAN_NET_CMD_CSF	0x20
+-#define		TLAN_NET_CMD_CAF	0x10
+-#define		TLAN_NET_CMD_NOBRX	0x08
+-#define		TLAN_NET_CMD_DUPLEX	0x04
+-#define		TLAN_NET_CMD_TRFRAM	0x02
+-#define		TLAN_NET_CMD_TXPACE	0x01
+-#define TLAN_NET_SIO			0x01
+-#define 	TLAN_NET_SIO_MINTEN	0x80
+-#define		TLAN_NET_SIO_ECLOK	0x40
+-#define		TLAN_NET_SIO_ETXEN	0x20
+-#define		TLAN_NET_SIO_EDATA	0x10
+-#define		TLAN_NET_SIO_NMRST	0x08
+-#define		TLAN_NET_SIO_MCLK	0x04
+-#define		TLAN_NET_SIO_MTXEN	0x02
+-#define		TLAN_NET_SIO_MDATA	0x01
+-#define TLAN_NET_STS			0x02
+-#define		TLAN_NET_STS_MIRQ	0x80
+-#define		TLAN_NET_STS_HBEAT	0x40
+-#define		TLAN_NET_STS_TXSTOP	0x20
+-#define		TLAN_NET_STS_RXSTOP	0x10
+-#define		TLAN_NET_STS_RSRVD	0x0F
+-#define TLAN_NET_MASK			0x03
+-#define		TLAN_NET_MASK_MASK7	0x80
+-#define		TLAN_NET_MASK_MASK6	0x40
+-#define		TLAN_NET_MASK_MASK5	0x20
+-#define		TLAN_NET_MASK_MASK4	0x10
+-#define		TLAN_NET_MASK_RSRVD	0x0F
+-#define TLAN_NET_CONFIG			0x04
+-#define 	TLAN_NET_CFG_RCLK	0x8000
+-#define		TLAN_NET_CFG_TCLK	0x4000
+-#define		TLAN_NET_CFG_BIT	0x2000
+-#define		TLAN_NET_CFG_RXCRC	0x1000
+-#define		TLAN_NET_CFG_PEF	0x0800
+-#define		TLAN_NET_CFG_1FRAG	0x0400
+-#define		TLAN_NET_CFG_1CHAN	0x0200
+-#define		TLAN_NET_CFG_MTEST	0x0100
+-#define		TLAN_NET_CFG_PHY_EN	0x0080
+-#define		TLAN_NET_CFG_MSMASK	0x007F
+-#define TLAN_MAN_TEST			0x06
+-#define TLAN_DEF_VENDOR_ID		0x08
+-#define TLAN_DEF_DEVICE_ID		0x0A
+-#define TLAN_DEF_REVISION		0x0C
+-#define TLAN_DEF_SUBCLASS		0x0D
+-#define TLAN_DEF_MIN_LAT		0x0E
+-#define TLAN_DEF_MAX_LAT		0x0F
+-#define TLAN_AREG_0			0x10
+-#define TLAN_AREG_1			0x16
+-#define TLAN_AREG_2			0x1C
+-#define TLAN_AREG_3			0x22
+-#define TLAN_HASH_1			0x28
+-#define TLAN_HASH_2			0x2C
+-#define TLAN_GOOD_TX_FRMS		0x30
+-#define TLAN_TX_UNDERUNS		0x33
+-#define TLAN_GOOD_RX_FRMS		0x34
+-#define TLAN_RX_OVERRUNS		0x37
+-#define TLAN_DEFERRED_TX		0x38
+-#define TLAN_CRC_ERRORS			0x3A
+-#define TLAN_CODE_ERRORS		0x3B
+-#define TLAN_MULTICOL_FRMS		0x3C
+-#define TLAN_SINGLECOL_FRMS		0x3E
+-#define TLAN_EXCESSCOL_FRMS		0x40
+-#define TLAN_LATE_COLS			0x41
+-#define TLAN_CARRIER_LOSS		0x42
+-#define TLAN_ACOMMIT			0x43
+-#define TLAN_LED_REG			0x44
+-#define		TLAN_LED_ACT		0x10
+-#define		TLAN_LED_LINK		0x01
+-#define TLAN_BSIZE_REG			0x45
+-#define TLAN_MAX_RX			0x46
+-#define TLAN_INT_DIS			0x48
+-#define		TLAN_ID_TX_EOC		0x04
+-#define		TLAN_ID_RX_EOF		0x02
+-#define		TLAN_ID_RX_EOC		0x01
+-
+-/* ThunderLAN Interrupt Codes */
+-
+-#define TLAN_INT_NUMBER_OF_INTS	8
+-
+-#define TLAN_INT_NONE			0x0000
+-#define TLAN_INT_TX_EOF			0x0001
+-#define TLAN_INT_STAT_OVERFLOW		0x0002
+-#define TLAN_INT_RX_EOF			0x0003
+-#define TLAN_INT_DUMMY			0x0004
+-#define TLAN_INT_TX_EOC			0x0005
+-#define TLAN_INT_STATUS_CHECK		0x0006
+-#define TLAN_INT_RX_EOC			0x0007
+-#define TLAN_TLPHY_ID			0x10
+-#define TLAN_TLPHY_CTL			0x11
+-#define 	TLAN_TC_IGLINK		0x8000
+-#define		TLAN_TC_SWAPOL		0x4000
+-#define		TLAN_TC_AUISEL		0x2000
+-#define		TLAN_TC_SQEEN		0x1000
+-#define		TLAN_TC_MTEST		0x0800
+-#define		TLAN_TC_RESERVED	0x07F8
+-#define		TLAN_TC_NFEW		0x0004
+-#define		TLAN_TC_INTEN		0x0002
+-#define		TLAN_TC_TINT		0x0001
+-#define TLAN_TLPHY_STS			0x12
+-#define		TLAN_TS_MINT		0x8000
+-#define		TLAN_TS_PHOK		0x4000
+-#define		TLAN_TS_POLOK		0x2000
+-#define		TLAN_TS_TPENERGY	0x1000
+-#define		TLAN_TS_RESERVED	0x0FFF
+-#define TLAN_TLPHY_PAR			0x19
+-#define		TLAN_PHY_CIM_STAT	0x0020
+-#define		TLAN_PHY_SPEED_100	0x0040
+-#define		TLAN_PHY_DUPLEX_FULL	0x0080
+-#define		TLAN_PHY_AN_EN_STAT     0x0400
+-
+-
+-/* ThunderLAN MII Registers */
+-
+-/* Generic MII/PHY Registers */
+-
+-#define MII_GEN_CTL			0x00
+-#define 	MII_GC_RESET		0x8000
+-#define		MII_GC_LOOPBK		0x4000
+-#define		MII_GC_SPEEDSEL		0x2000
+-#define		MII_GC_AUTOENB		0x1000
+-#define		MII_GC_PDOWN		0x0800
+-#define		MII_GC_ISOLATE		0x0400
+-#define		MII_GC_AUTORSRT		0x0200
+-#define		MII_GC_DUPLEX		0x0100
+-#define		MII_GC_COLTEST		0x0080
+-#define		MII_GC_RESERVED		0x007F
+-#define MII_GEN_STS			0x01
+-#define		MII_GS_100BT4		0x8000
+-#define		MII_GS_100BTXFD		0x4000
+-#define		MII_GS_100BTXHD		0x2000
+-#define		MII_GS_10BTFD		0x1000
+-#define		MII_GS_10BTHD		0x0800
+-#define		MII_GS_RESERVED		0x07C0
+-#define		MII_GS_AUTOCMPLT	0x0020
+-#define		MII_GS_RFLT		0x0010
+-#define		MII_GS_AUTONEG		0x0008
+-#define		MII_GS_LINK		0x0004
+-#define		MII_GS_JABBER		0x0002
+-#define		MII_GS_EXTCAP		0x0001
+-#define MII_GEN_ID_HI			0x02
+-#define MII_GEN_ID_LO			0x03
+-#define 	MII_GIL_OUI		0xFC00
+-#define 	MII_GIL_MODEL		0x03F0
+-#define 	MII_GIL_REVISION	0x000F
+-#define MII_AN_ADV			0x04
+-#define MII_AN_LPA			0x05
+-#define MII_AN_EXP			0x06
+-
+-/* ThunderLAN Specific MII/PHY Registers */
+-
+-#define 	TLAN_TC_IGLINK		0x8000
+-#define		TLAN_TC_SWAPOL		0x4000
+-#define		TLAN_TC_AUISEL		0x2000
+-#define		TLAN_TC_SQEEN		0x1000
+-#define		TLAN_TC_MTEST		0x0800
+-#define		TLAN_TC_RESERVED	0x07F8
+-#define		TLAN_TC_NFEW		0x0004
+-#define		TLAN_TC_INTEN		0x0002
+-#define		TLAN_TC_TINT		0x0001
+-#define		TLAN_TS_MINT		0x8000
+-#define		TLAN_TS_PHOK		0x4000
+-#define		TLAN_TS_POLOK		0x2000
+-#define		TLAN_TS_TPENERGY	0x1000
+-#define		TLAN_TS_RESERVED	0x0FFF
+-#define		TLAN_PHY_CIM_STAT	0x0020
+-#define		TLAN_PHY_SPEED_100	0x0040
+-#define		TLAN_PHY_DUPLEX_FULL	0x0080
+-#define		TLAN_PHY_AN_EN_STAT     0x0400
+-
+-/* National Sem. & Level1 PHY id's */
+-#define NAT_SEM_ID1			0x2000
+-#define NAT_SEM_ID2			0x5C01
+-#define LEVEL1_ID1			0x7810
+-#define LEVEL1_ID2			0x0000
+-
+-#define TLan_ClearBit( bit, port )	outb_p(inb_p(port) & ~bit, port)
+-#define TLan_GetBit( bit, port )	((int) (inb_p(port) & bit))
+-#define TLan_SetBit( bit, port )	outb_p(inb_p(port) | bit, port)
+-
+-typedef	unsigned int	u32;
+-typedef	unsigned short	u16;
+-typedef	unsigned char	u8;
++static void TLan_ResetLists(struct nic *nic __unused);
++static void TLan_ResetAdapter(struct nic *nic __unused);
++static void TLan_FinishReset(struct nic *nic __unused);
+ 
+-/* Routines to access internal registers. */
++static void TLan_EeSendStart(u16);
++static int TLan_EeSendByte(u16, u8, int);
++static void TLan_EeReceiveByte(u16, u8 *, int);
++static int TLan_EeReadByte(u16 io_base, u8, u8 *);
+ 
+-inline u8 TLan_DioRead8(u16 base_addr, u16 internal_addr)
+-{
+-	outw(internal_addr, base_addr + TLAN_DIO_ADR);
+-	return (inb((base_addr + TLAN_DIO_DATA) + (internal_addr & 0x3)));
+-	
+-} /* TLan_DioRead8 */
++static void TLan_PhyDetect(struct nic *nic);
++static void TLan_PhyPowerDown(struct nic *nic);
++static void TLan_PhyPowerUp(struct nic *nic);
+ 
+-inline u16 TLan_DioRead16(u16 base_addr, u16 internal_addr)
+-{
+-	outw(internal_addr, base_addr + TLAN_DIO_ADR);
+-	return (inw((base_addr + TLAN_DIO_DATA) + (internal_addr & 0x2)));
+ 
+-} /* TLan_DioRead16 */
++static void TLan_SetMac(struct nic *nic __unused, int areg, char *mac);
+ 
+-inline u32 TLan_DioRead32(u16 base_addr, u16 internal_addr)
+-{
+-	outw(internal_addr, base_addr + TLAN_DIO_ADR);
+-	return (inl(base_addr + TLAN_DIO_DATA));
++static void TLan_PhyReset(struct nic *nic);
++static void TLan_PhyStartLink(struct nic *nic);
++static void TLan_PhyFinishAutoNeg(struct nic *nic);
+ 
+-} /* TLan_DioRead32 */
++#ifdef MONITOR
++static void TLan_PhyMonitor(struct nic *nic);
++#endif
+ 
+-inline void TLan_DioWrite8(u16 base_addr, u16 internal_addr, u8 data)
+-{
+-	outw(internal_addr, base_addr + TLAN_DIO_ADR);
+-	outb(data, base_addr + TLAN_DIO_DATA + (internal_addr & 0x3));
+ 
+-}
++static void refill_rx(struct nic *nic __unused);
+ 
+-inline void TLan_DioWrite16(u16 base_addr, u16 internal_addr, u16 data)
+-{
+-	outw(internal_addr, base_addr + TLAN_DIO_ADR);
+-	outw(data, base_addr + TLAN_DIO_DATA + (internal_addr & 0x2));
++static int TLan_MiiReadReg(struct nic *nic __unused, u16, u16, u16 *);
++static void TLan_MiiSendData(u16, u32, unsigned);
++static void TLan_MiiSync(u16);
++static void TLan_MiiWriteReg(struct nic *nic __unused, u16, u16, u16);
+ 
+-}
+ 
+-inline void TLan_DioWrite32(u16 base_addr, u16 internal_addr, u32 data)
+-{
+-	outw(internal_addr, base_addr + TLAN_DIO_ADR);
+-	outl(data, base_addr + TLAN_DIO_DATA + (internal_addr & 0x2));
++const char *media[] = {
++	"10BaseT-HD ", "10BaseT-FD ", "100baseTx-HD ",
++	"100baseTx-FD", "100baseT4", 0
++};
+ 
+-}
++/* This much match tlan_pci_tbl[]!  */
++enum tlan_nics {
++	NETEL10 = 0, NETEL100 = 1, NETFLEX3I = 2, THUNDER = 3, NETFLEX3B =
++	    4, NETEL100PI = 5,
++	NETEL100D = 6, NETEL100I = 7, OC2183 = 8, OC2325 = 9, OC2326 =
++	    10, NETELLIGENT_10_100_WS_5100 = 11,
++	NETELLIGENT_10_T2 = 12
++};
+ 
+-/* NIC specific static variables go here */
++struct pci_id_info {
++	const char *name;
++	int nic_id;
++	struct match_info {
++		u32 pci, pci_mask, subsystem, subsystem_mask;
++		u32 revision, revision_mask;	/* Only 8 bits. */
++	} id;
++	u32 flags;
++	u16 addrOfs;		/* Address Offset */
++};
+ 
+-/*****************************************************************************
+-******************************************************************************
++static struct pci_id_info tlan_pci_tbl[] = {
++	{"Compaq Netelligent 10 T PCI UTP", NETEL10,
++	 {0xae340e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_ACTIVITY_LED, 0x83},
++	{"Compaq Netelligent 10/100 TX PCI UTP", NETEL100,
++	 {0xae320e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_ACTIVITY_LED, 0x83},
++	{"Compaq Integrated NetFlex-3/P", NETFLEX3I,
++	 {0xae350e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_NONE, 0x83},
++	{"Compaq NetFlex-3/P", THUNDER,
++	 {0xf1300e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83},
++	{"Compaq NetFlex-3/P", NETFLEX3B,
++	 {0xf1500e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_NONE, 0x83},
++	{"Compaq Netelligent Integrated 10/100 TX UTP", NETEL100PI,
++	 {0xae430e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_ACTIVITY_LED, 0x83},
++	{"Compaq Netelligent Dual 10/100 TX PCI UTP", NETEL100D,
++	 {0xae400e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_NONE, 0x83},
++	{"Compaq Netelligent 10/100 TX Embedded UTP", NETEL100I,
++	 {0xb0110e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_NONE, 0x83},
++	{"Olicom OC-2183/2185", OC2183,
++	 {0x0013108d, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_USE_INTERN_10, 0x83},
++	{"Olicom OC-2325", OC2325,
++	 {0x0012108d, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_UNMANAGED_PHY, 0xF8},
++	{"Olicom OC-2326", OC2326,
++	 {0x0014108d, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_USE_INTERN_10, 0xF8},
++	{"Compaq Netelligent 10/100 TX UTP", NETELLIGENT_10_100_WS_5100,
++	 {0xb0300e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_ACTIVITY_LED, 0x83},
++	{"Compaq Netelligent 10 T/2 PCI UTP/Coax", NETELLIGENT_10_T2,
++	 {0xb0120e11, 0xffffffff, 0, 0, 0, 0},
++	 TLAN_ADAPTER_NONE, 0x83},
++	{"Compaq NetFlex-3/E", 0,	/* EISA card */
++	 {0, 0, 0, 0, 0, 0},
++	 TLAN_ADAPTER_ACTIVITY_LED | TLAN_ADAPTER_UNMANAGED_PHY |
++	 TLAN_ADAPTER_BIT_RATE_PHY, 0x83},
++	{"Compaq NetFlex-3/E", 0,	/* EISA card */
++	 {0, 0, 0, 0, 0, 0},
++	 TLAN_ADAPTER_ACTIVITY_LED, 0x83},
++	{0, 0,
++	 {0, 0, 0, 0, 0, 0},
++	 0, 0},
++};
+ 
+-	ThunderLAN Driver Eeprom routines
+ 
+-	The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
+-	EEPROM.  These functions are based on information in Microchip's
+-	data sheet.  I don't know how well this functions will work with
+-	other EEPROMs.
++struct TLanList {
++	u32 forward;
++	u16 cStat;
++	u16 frameSize;
++	struct {
++		u32 count;
++		u32 address;
++	} buffer[TLAN_BUFFERS_PER_LIST];
++};
+ 
+-******************************************************************************
+-*****************************************************************************/
+ 
+-	/***************************************************************
+-	 *	TLan_EeSendStart
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:	
+-	 *		io_base		The IO port base address for the
+-	 *				TLAN device with the EEPROM to
+-	 *				use.
+-	 *
+-	 *	This function sends a start cycle to an EEPROM attached
+-	 *	to a TLAN chip.
+-	 *
+-	 **************************************************************/
+ 
+-static void TLan_EeSendStart( u16 io_base )
+-{
+-	u16	sio;
++struct TLanList tx_ring[TLAN_NUM_TX_LISTS];
++static unsigned char txb[TLAN_MAX_FRAME_SIZE * TLAN_NUM_TX_LISTS];
+ 
+-	outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+-	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
++struct TLanList rx_ring[TLAN_NUM_RX_LISTS];
++static unsigned char rxb[TLAN_MAX_FRAME_SIZE * TLAN_NUM_RX_LISTS];
+ 
+-	TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-	TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+-	TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+-	TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
+-	TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
++typedef u8 TLanBuffer[TLAN_MAX_FRAME_SIZE];
+ 
+-} /* TLan_EeSendStart */
+ 
+-	/***************************************************************
+-	 *	TLan_EeSendByte
+-	 *
+-	 *	Returns:
+-	 *		If the correct ack was received, 0, otherwise 1
+-	 *	Parms:	io_base		The IO port base address for the
+-	 *				TLAN device with the EEPROM to
+-	 *				use.
+-	 *		data		The 8 bits of information to
+-	 *				send to the EEPROM.
+-	 *		stop		If TLAN_EEPROM_STOP is passed, a
+-	 *				stop cycle is sent after the
+-	 *				byte is sent after the ack is
+-	 *				read.
+-	 *
+-	 *	This function sends a byte on the serial EEPROM line,
+-	 *	driving the clock to send each bit. The function then
+-	 *	reverses transmission direction and reads an acknowledge
+-	 *	bit.
+-	 *
+-	 **************************************************************/
++int chip_idx;
+ 
+-static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
+-{
+-	int	err;
+-	u8	place;
+-	u16	sio;
+ 
+-	outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+-	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
++/*****************************************************************
++* TLAN Private Information Structure
++*
++****************************************************************/
++struct tlan_private {
++	unsigned short vendor_id;	/* PCI Vendor code */
++	unsigned short dev_id;	/* PCI Device code */
++	const char *nic_name;
++	u8 *padBuffer;
++	u8 *rxBuffer;
++	struct TLanList *rx_head_desc;
++	u32 rxHead;
++	u32 rxTail;
++	u32 rxEocCount;
++	unsigned int cur_rx, dirty_rx;	/* Producer/consumer ring indicies */
++	unsigned int cur_tx, dirty_tx;
++	unsigned rx_buf_sz;	/* Based on mtu + Slack */
++	struct TLanList *txList;
++	struct TLanList *rxList;
++	u8 *txBuffer;
++	u32 txHead;
++	u32 txInProgress;
++	u32 txTail;
++	int eoc;
++	u32 txBusyCount;
++	u32 phyOnline;
++	u32 timerSetAt;
++	u32 timerType;
++	u32 adapterRev;
++	u32 aui;
++	u32 debug;
++	u32 duplex;
++	u32 phy[2];
++	u32 phyNum;
++	u32 speed;
++	u8 tlanRev;
++	u8 tlanFullDuplex;
++	char devName[8];
++	u8 link;
++	u8 is_eisa;
++	u8 neg_be_verbose;
++} TLanPrivateInfo;
+ 
+-	/* Assume clock is low, tx is enabled; */
+-	for ( place = 0x80; place != 0; place >>= 1 ) {
+-		if ( place & data )
+-			TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+-		else
+-			TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
+-		TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-		TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+-	}
+-	TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
+-	TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-	err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
+-	TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+-	TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
++static struct tlan_private *priv;
+ 
+-	if ( ( ! err ) && stop ) {
+-		TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );	/* STOP, raise data while clock is high */
+-		TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-		TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+-	}
++u32 BASE;
+ 
+-	return ( err );
+ 
+-} /* TLan_EeSendByte */
+ 
+-	/***************************************************************
+-	 *	TLan_EeReceiveByte
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		io_base		The IO port base address for the
+-	 *				TLAN device with the EEPROM to
+-	 *				use.
+-	 *		data		An address to a char to hold the
+-	 *				data sent from the EEPROM.
+-	 *		stop		If TLAN_EEPROM_STOP is passed, a
+-	 *				stop cycle is sent after the
+-	 *				byte is received, and no ack is
+-	 *				sent.
+-	 *
+-	 *	This function receives 8 bits of data from the EEPROM
+-	 *	over the serial link.  It then sends and ack bit, or no
+-	 *	ack and a stop bit.  This function is used to retrieve
+-	 *	data after the address of a byte in the EEPROM has been
+-	 *	sent.
+-	 *
+-	 **************************************************************/
++/***************************************************************
++*	TLan_ResetLists
++*
++*	Returns:
++*		Nothing
++*	Parms:
++*		dev	The device structure with the list
++*			stuctures to be reset.
++*
++*	This routine sets the variables associated with managing
++*	the TLAN lists to their initial values.
++*
++**************************************************************/
+ 
+-static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
++void TLan_ResetLists(struct nic *nic __unused)
+ {
+-	u8  place;
+-	u16 sio;
+ 
+-	outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+-	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+-	*data = 0;
++	int i;
++	struct TLanList *list;
++	priv->txHead = 0;
++	priv->txTail = 0;
+ 
+-	/* Assume clock is low, tx is enabled; */
+-	TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
+-	for ( place = 0x80; place; place >>= 1 ) {
+-		TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-		if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
+-			*data |= place;
+-		TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
++	for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
++		list = &tx_ring[i];
++		list->cStat = TLAN_CSTAT_UNUSED;
++/*		list->buffer[0].address = 0; */
++		list->buffer[0].address = virt_to_bus(txb + 
++				(i * TLAN_MAX_FRAME_SIZE)); 
++		list->buffer[2].count = 0;
++		list->buffer[2].address = 0;
++		list->buffer[9].address = 0;
++/*		list->forward = 0; */
+ 	}
+ 
+-	TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+-	if ( ! stop ) {
+-		TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );	/* Ack = 0 */
+-		TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-		TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+-	} else {
+-		TLan_SetBit( TLAN_NET_SIO_EDATA, sio );		/* No ack = 1 (?) */
+-		TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-		TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+-		TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );	/* STOP, raise data while clock is high */
+-		TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+-		TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+-	}
++	priv->cur_rx = 0;
++	priv->rx_buf_sz = (TLAN_MAX_FRAME_SIZE);
++	priv->rx_head_desc = &rx_ring[0];
++
++	/* Initialize all the Rx descriptors */
++	for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
++		rx_ring[i].forward = virt_to_le32desc(&rx_ring[i + 1]);
++		rx_ring[i].cStat = TLAN_CSTAT_READY;
++		rx_ring[i].frameSize = TLAN_MAX_FRAME_SIZE;
++		rx_ring[i].buffer[0].count =
++		    TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
++		rx_ring[i].buffer[0].address =
++		    virt_to_le32desc(&rxb[i * TLAN_MAX_FRAME_SIZE]);
++		rx_ring[i].buffer[1].count = 0;
++		rx_ring[i].buffer[1].address = 0;
++	}
++
++	/* Mark the last entry as wrapping the ring */
++	rx_ring[i - 1].forward = virt_to_le32desc(&rx_ring[0]);
++	priv->dirty_rx = (unsigned int) (i - TLAN_NUM_RX_LISTS);
+ 
+-} /* TLan_EeReceiveByte */
++} /* TLan_ResetLists */
+ 
+-	/***************************************************************
+-	 *	TLan_EeReadByte
+-	 *
+-	 *	Returns:
+-	 *		No error = 0, else, the stage at which the error
+-	 *		occurred.
+-	 *	Parms:
+-	 *		io_base		The IO port base address for the
+-	 *				TLAN device with the EEPROM to
+-	 *				use.
+-	 *		ee_addr		The address of the byte in the
+-	 *				EEPROM whose contents are to be
+-	 *				retrieved.
+-	 *		data		An address to a char to hold the
+-	 *				data obtained from the EEPROM.
+-	 *
+-	 *	This function reads a byte of information from an byte
+-	 *	cell in the EEPROM.
+-	 *
+-	 **************************************************************/
++/***************************************************************
++*	TLan_Reset
++*
++*	Returns:
++*		0
++*	Parms:
++*		dev	Pointer to device structure of adapter
++*			to be reset.
++*
++*	This function resets the adapter and it's physical
++*	device.  See Chap. 3, pp. 9-10 of the "ThunderLAN
++*	Programmer's Guide" for details.  The routine tries to
++*	implement what is detailed there, though adjustments
++*	have been made.
++*
++**************************************************************/
+ 
+-static int TLan_EeReadByte( u16 io_base, u8 ee_addr, u8 *data )
++void TLan_ResetAdapter(struct nic *nic __unused)
+ {
+-	int err;
+-	unsigned long flags = 0;
+-	int ret=0;
++	int i;
++	u32 addr;
++	u32 data;
++	u8 data8;
+ 
+-	TLan_EeSendStart( io_base );
+-	err = TLan_EeSendByte( io_base, 0xA0, TLAN_EEPROM_ACK );
+-	if (err)
+-	{
+-		ret=1;
+-		goto fail;
+-	}
+-	err = TLan_EeSendByte( io_base, ee_addr, TLAN_EEPROM_ACK );
+-	if (err)
+-	{
+-		ret=2;
+-		goto fail;
+-	}
+-	TLan_EeSendStart( io_base );
+-	err = TLan_EeSendByte( io_base, 0xA1, TLAN_EEPROM_ACK );
+-	if (err)
+-	{
+-		ret=3;
+-		goto fail;
+-	}
+-	TLan_EeReceiveByte( io_base, data, TLAN_EEPROM_STOP );
+-fail:
++	priv->tlanFullDuplex = FALSE;
++	priv->phyOnline = 0;
++/*  1.	Assert reset bit. */
+ 
+-	return ret;
++	data = inl(BASE + TLAN_HOST_CMD);
++	data |= TLAN_HC_AD_RST;
++	outl(data, BASE + TLAN_HOST_CMD);
+ 
+-} /* TLan_EeReadByte */
++	udelay(1000);
+ 
+-#if	0
+-/* Not yet converted from Linux driver */
+-/*****************************************************************************
+-******************************************************************************
++/*  2.	Turn off interrupts. ( Probably isn't necessary ) */
+ 
+-	ThunderLAN Driver PHY Layer Routines
++	data = inl(BASE + TLAN_HOST_CMD);
++	data |= TLAN_HC_INT_OFF;
++	outl(data, BASE + TLAN_HOST_CMD);
++/*  3.	Clear AREGs and HASHs. */
+ 
+-******************************************************************************
+-*****************************************************************************/
++	for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4) {
++		TLan_DioWrite32(BASE, (u16) i, 0);
++	}
+ 
+-	/*********************************************************************
+-	 *	TLan_PhyPrint
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		dev	A pointer to the device structure of the
+-	 *			TLAN device having the PHYs to be detailed.
+-	 *				
+-	 *	This function prints the registers a PHY (aka tranceiver).
+-	 *
+-	 ********************************************************************/
++/*  4.	Setup NetConfig register. */
+ 
+-void TLan_PhyPrint( struct net_device *dev )
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-	u16 i, data0, data1, data2, data3, phy;
++	data =
++	    TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
++	TLan_DioWrite16(BASE, TLAN_NET_CONFIG, (u16) data);
+ 
+-	phy = priv->phy[priv->phyNum];
++/*  5.	Load Ld_Tmr and Ld_Thr in HOST_CMD. */
+ 
+-	if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
+-		printk( "TLAN:   Device %s, Unmanaged PHY.\n", dev->name );
+-	} else if ( phy <= TLAN_PHY_MAX_ADDR ) {
+-		printk( "TLAN:   Device %s, PHY 0x%02x.\n", dev->name, phy );
+-		printk( "TLAN:      Off.  +0     +1     +2     +3 \n" );
+-                for ( i = 0; i < 0x20; i+= 4 ) {
+-			printk( "TLAN:      0x%02x", i );
+-			TLan_MiiReadReg( dev, phy, i, &data0 );
+-			printk( " 0x%04hx", data0 );
+-			TLan_MiiReadReg( dev, phy, i + 1, &data1 );
+-			printk( " 0x%04hx", data1 );
+-			TLan_MiiReadReg( dev, phy, i + 2, &data2 );
+-			printk( " 0x%04hx", data2 );
+-			TLan_MiiReadReg( dev, phy, i + 3, &data3 );
+-			printk( " 0x%04hx\n", data3 );
+-		}
+-	} else {
+-		printk( "TLAN:   Device %s, Invalid PHY.\n", dev->name );
+-	}
++	outl(TLAN_HC_LD_TMR | 0x3f, BASE + TLAN_HOST_CMD);
++	outl(TLAN_HC_LD_THR | 0x0, BASE + TLAN_HOST_CMD);
+ 
+-} /* TLan_PhyPrint */
++/*  6.	Unreset the MII by setting NMRST (in NetSio) to 1. */
+ 
+-	/*********************************************************************
+-	 *	TLan_PhyDetect
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		dev	A pointer to the device structure of the adapter
+-	 *			for which the PHY needs determined.
+-	 *
+-	 *	So far I've found that adapters which have external PHYs
+-	 *	may also use the internal PHY for part of the functionality.
+-	 *	(eg, AUI/Thinnet).  This function finds out if this TLAN
+-	 *	chip has an internal PHY, and then finds the first external
+-	 *	PHY (starting from address 0) if it exists).
+-	 *
+-	 ********************************************************************/
++	outw(TLAN_NET_SIO, BASE + TLAN_DIO_ADR);
++	addr = BASE + TLAN_DIO_DATA + TLAN_NET_SIO;
++	TLan_SetBit(TLAN_NET_SIO_NMRST, addr);
+ 
+-void TLan_PhyDetect( struct net_device *dev )
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-	u16		control;
+-	u16		hi;
+-	u16		lo;
+-	u32		phy;
++/*  7.	Setup the remaining registers. */
+ 
+-	if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
+-		priv->phyNum = 0xFFFF;
+-		return;
++	if (priv->tlanRev >= 0x30) {
++		data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
++		TLan_DioWrite8(BASE, TLAN_INT_DIS, data8);
+ 	}
++	TLan_PhyDetect(nic);
++	data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
+ 
+-	TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi );
+-	
+-	if ( hi != 0xFFFF ) {
+-		priv->phy[0] = TLAN_PHY_MAX_ADDR;
+-	} else {
+-		priv->phy[0] = TLAN_PHY_NONE;
++	if (tlan_pci_tbl[chip_idx].flags & TLAN_ADAPTER_BIT_RATE_PHY) {
++		data |= TLAN_NET_CFG_BIT;
++		if (priv->aui == 1) {
++			TLan_DioWrite8(BASE, TLAN_ACOMMIT, 0x0a);
++		} else if (priv->duplex == TLAN_DUPLEX_FULL) {
++			TLan_DioWrite8(BASE, TLAN_ACOMMIT, 0x00);
++			priv->tlanFullDuplex = TRUE;
++		} else {
++			TLan_DioWrite8(BASE, TLAN_ACOMMIT, 0x08);
++		}
+ 	}
+ 
+-	priv->phy[1] = TLAN_PHY_NONE;
+-	for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
+-		TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
+-		TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
+-		TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
+-		if ( ( control != 0xFFFF ) || ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
+-			TLAN_DBG( TLAN_DEBUG_GNRL, "PHY found at %02x %04x %04x %04x\n", phy, control, hi, lo );
+-			if ( ( priv->phy[1] == TLAN_PHY_NONE ) && ( phy != TLAN_PHY_MAX_ADDR ) ) {
+-				priv->phy[1] = phy;
+-			}
+-		}
++	if (priv->phyNum == 0) {
++		data |= TLAN_NET_CFG_PHY_EN;
+ 	}
++	TLan_DioWrite16(BASE, TLAN_NET_CONFIG, (u16) data);
+ 
+-	if ( priv->phy[1] != TLAN_PHY_NONE ) {
+-		priv->phyNum = 1;
+-	} else if ( priv->phy[0] != TLAN_PHY_NONE ) {
+-		priv->phyNum = 0;
++	if (tlan_pci_tbl[chip_idx].flags & TLAN_ADAPTER_UNMANAGED_PHY) {
++		TLan_FinishReset(nic);
+ 	} else {
+-		printk( "TLAN:  Cannot initialize device, no PHY was found!\n" );
++		TLan_PhyPowerDown(nic);
+ 	}
+ 
+-} /* TLan_PhyDetect */
++}	/* TLan_ResetAdapter */
+ 
+-void TLan_PhyPowerDown( struct net_device *dev )
++void TLan_FinishReset(struct nic *nic)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u16		value;
+ 
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name );
+-	value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
+-	TLan_MiiSync( dev->base_addr );
+-	TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
+-	if ( ( priv->phyNum == 0 ) && ( priv->phy[1] != TLAN_PHY_NONE ) && ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
+-		TLan_MiiSync( dev->base_addr );
+-		TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
++	u8 data;
++	u32 phy;
++	u8 sio;
++	u16 status;
++	u16 partner;
++	u16 tlphy_ctl;
++	u16 tlphy_par;
++	u16 tlphy_id1, tlphy_id2;
++	int i;
++
++	phy = priv->phy[priv->phyNum];
++
++	data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
++	if (priv->tlanFullDuplex) {
++		data |= TLAN_NET_CMD_DUPLEX;
+ 	}
++	TLan_DioWrite8(BASE, TLAN_NET_CMD, data);
++	data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
++	if (priv->phyNum == 0) {
++		data |= TLAN_NET_MASK_MASK7;
++	}
++	TLan_DioWrite8(BASE, TLAN_NET_MASK, data);
++	TLan_DioWrite16(BASE, TLAN_MAX_RX, ((1536) + 7) & ~7);
++	TLan_MiiReadReg(nic, phy, MII_GEN_ID_HI, &tlphy_id1);
++	TLan_MiiReadReg(nic, phy, MII_GEN_ID_LO, &tlphy_id2);
+ 
+-	/* Wait for 50 ms and powerup
+-	 * This is abitrary.  It is intended to make sure the
+-	 * tranceiver settles.
+-	 */
+-	TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP );
++	if ((tlan_pci_tbl[chip_idx].flags & TLAN_ADAPTER_UNMANAGED_PHY)
++	    || (priv->aui)) {
++		status = MII_GS_LINK;
++		printf("TLAN:  %s: Link forced.\n", priv->nic_name);
++	} else {
++		TLan_MiiReadReg(nic, phy, MII_GEN_STS, &status);
++		udelay(1000);
++		TLan_MiiReadReg(nic, phy, MII_GEN_STS, &status);
++		if ((status & MII_GS_LINK) &&	/* We only support link info on Nat.Sem. PHY's */
++		    (tlphy_id1 == NAT_SEM_ID1)
++		    && (tlphy_id2 == NAT_SEM_ID2)) {
++			TLan_MiiReadReg(nic, phy, MII_AN_LPA, &partner);
++			TLan_MiiReadReg(nic, phy, TLAN_TLPHY_PAR,
++					&tlphy_par);
+ 
+-} /* TLan_PhyPowerDown */
++			printf("TLAN: %s: Link active with ",
++			       priv->nic_name);
++			if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
++				printf("forced 10%sMbps %s-Duplex\n",
++				       tlphy_par & TLAN_PHY_SPEED_100 ? ""
++				       : "0",
++				       tlphy_par & TLAN_PHY_DUPLEX_FULL ?
++				       "Full" : "Half");
++			} else {
++				printf
++				    ("AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
++				     tlphy_par & TLAN_PHY_SPEED_100 ? "" :
++				     "0",
++				     tlphy_par & TLAN_PHY_DUPLEX_FULL ?
++				     "Full" : "Half");
++				printf("TLAN: Partner capability: ");
++				for (i = 5; i <= 10; i++)
++					if (partner & (1 << i))
++						printf("%s", media[i - 5]);
++				printf("\n");
++			}
+ 
+-void TLan_PhyPowerUp( struct net_device *dev )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u16		value;
++			TLan_DioWrite8(BASE, TLAN_LED_REG, TLAN_LED_LINK);
++#ifdef MONITOR
++			/* We have link beat..for now anyway */
++			priv->link = 1;
++			/*Enabling link beat monitoring */
++			/* TLan_SetTimer( nic, (10*HZ), TLAN_TIMER_LINK_BEAT ); */
++			mdelay(10000);
++			TLan_PhyMonitor(nic);
++#endif
++		} else if (status & MII_GS_LINK) {
++			printf("TLAN: %s: Link active\n", priv->nic_name);
++			TLan_DioWrite8(BASE, TLAN_LED_REG, TLAN_LED_LINK);
++		}
++	}
+ 
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name );
+-	TLan_MiiSync( dev->base_addr );
+-	value = MII_GC_LOOPBK;
+-	TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
+-	TLan_MiiSync(dev->base_addr);
+-	/* Wait for 500 ms and reset the
+-	 * tranceiver.  The TLAN docs say both 50 ms and
+-	 * 500 ms, so do the longer, just in case.
+-	 */
+-	TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET );
++	if (priv->phyNum == 0) {
++		TLan_MiiReadReg(nic, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
++		tlphy_ctl |= TLAN_TC_INTEN;
++		TLan_MiiWriteReg(nic, phy, TLAN_TLPHY_CTL, tlphy_ctl);
++		sio = TLan_DioRead8(BASE, TLAN_NET_SIO);
++		sio |= TLAN_NET_SIO_MINTEN;
++		TLan_DioWrite8(BASE, TLAN_NET_SIO, sio);
++	}
+ 
+-} /* TLan_PhyPowerUp */
++	if (status & MII_GS_LINK) {
++		TLan_SetMac(nic, 0, nic->node_addr);
++		priv->phyOnline = 1;
++		outb((TLAN_HC_INT_ON >> 8), BASE + TLAN_HOST_CMD + 1);
++/*		if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
++			outb( ( TLAN_HC_REQ_INT >> 8 ), BASE + TLAN_HOST_CMD + 1 );
++		}
+ 
+-void TLan_PhyReset( struct net_device *dev )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u16		phy;
+-	u16		value;
++		*/
++		outl(virt_to_bus(&rx_ring), BASE + TLAN_CH_PARM);
++		outl(TLAN_HC_GO | TLAN_HC_RT, BASE + TLAN_HOST_CMD);
++	} else {
++		printf
++		    ("TLAN: %s: Link inactive, will retry in 10 secs...\n",
++		     priv->nic_name);
++		/* TLan_SetTimer( nic, (10*HZ), TLAN_TIMER_FINISH_RESET ); */
++		mdelay(10000);
++		TLan_FinishReset(nic);
++		return;
+ 
+-	phy = priv->phy[priv->phyNum];
++	}
+ 
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name );
+-	TLan_MiiSync( dev->base_addr );
+-	value = MII_GC_LOOPBK | MII_GC_RESET;
+-	TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value );
+-	TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
+-	while ( value & MII_GC_RESET ) {
+-		TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
+-	}
+-
+-	/* Wait for 500 ms and initialize.
+-	 * I don't remember why I wait this long.
+-	 * I've changed this to 50ms, as it seems long enough.
+-	 */
+-	TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK );
+-
+-} /* TLan_PhyReset */
+-
+-void TLan_PhyStartLink( struct net_device *dev )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u16		ability;
+-	u16		control;
+-	u16		data;
+-	u16		phy;
+-	u16		status;
+-	u16		tctl;
+-
+-	phy = priv->phy[priv->phyNum];
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name );
+-	TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+-	TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability );
+-
+-	if ( ( status & MII_GS_AUTONEG ) && 
+-	     ( ! priv->aui ) ) {
+-		ability = status >> 11;
+-		if ( priv->speed  == TLAN_SPEED_10 && 
+-		     priv->duplex == TLAN_DUPLEX_HALF) {
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
+-		} else if ( priv->speed == TLAN_SPEED_10 &&
+-			    priv->duplex == TLAN_DUPLEX_FULL) {
+-			priv->tlanFullDuplex = TRUE;
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
+-		} else if ( priv->speed == TLAN_SPEED_100 &&
+-			    priv->duplex == TLAN_DUPLEX_HALF) {
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
+-		} else if ( priv->speed == TLAN_SPEED_100 &&
+-			    priv->duplex == TLAN_DUPLEX_FULL) {
+-			priv->tlanFullDuplex = TRUE;
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
+-		} else {
+-	
+-			/* Set Auto-Neg advertisement */
+-			TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1);
+-			/* Enablee Auto-Neg */
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 );
+-			/* Restart Auto-Neg */
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 );
+-			/* Wait for 4 sec for autonegotiation
+-		 	* to complete.  The max spec time is less than this
+-		 	* but the card need additional time to start AN.
+-		 	* .5 sec should be plenty extra.
+-		 	*/
+-			printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
+-			TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
+-			return;
+-		}
+-		
+-	}	
+-	
+-	if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) {
+-		priv->phyNum = 0;
+-		data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+-		TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
+-		TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN );
+-		return;
+-	}  else if ( priv->phyNum == 0 ) {
+-        	TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl );
+-		if ( priv->aui ) {
+-                	tctl |= TLAN_TC_AUISEL;
+-		} else { 
+-                	tctl &= ~TLAN_TC_AUISEL;
+-			control = 0;
+-			if ( priv->duplex == TLAN_DUPLEX_FULL ) {
+-				control |= MII_GC_DUPLEX;
+-				priv->tlanFullDuplex = TRUE;
+-			}
+-			if ( priv->speed == TLAN_SPEED_100 ) {
+-				control |= MII_GC_SPEEDSEL;
+-			}
+-       			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control );
+-		}
+-        	TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl );
+-	}
+-
+-	/* Wait for 2 sec to give the tranceiver time
+-	 * to establish link.
+-	 */
+-	TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET );
+-
+-} /* TLan_PhyStartLink */
+-
+-void TLan_PhyFinishAutoNeg( struct net_device *dev )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u16		an_adv;
+-	u16		an_lpa;
+-	u16		data;
+-	u16		mode;
+-	u16		phy;
+-	u16		status;
+-	
+-	phy = priv->phy[priv->phyNum];
+-
+-	TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+-	udelay( 1000 );
+-	TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+-
+-	if ( ! ( status & MII_GS_AUTOCMPLT ) ) {
+-		/* Wait for 8 sec to give the process
+-		 * more time.  Perhaps we should fail after a while.
+-		 */
+-		 if (!priv->neg_be_verbose++) {
+-			 printk(KERN_INFO "TLAN:  Giving autonegotiation more time.\n");
+-		 	 printk(KERN_INFO "TLAN:  Please check that your adapter has\n");
+-		 	 printk(KERN_INFO "TLAN:  been properly connected to a HUB or Switch.\n");
+-			 printk(KERN_INFO "TLAN:  Trying to establish link in the background...\n");
+-		 }
+-		TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
+-		return;
+-	}
+-
+-	printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
+-	TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
+-	TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
+-	mode = an_adv & an_lpa & 0x03E0;
+-	if ( mode & 0x0100 ) {
+-		priv->tlanFullDuplex = TRUE;
+-	} else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
+-		priv->tlanFullDuplex = TRUE;
+-	}
+-
+-	if ( ( ! ( mode & 0x0180 ) ) && ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) && ( priv->phyNum != 0 ) ) {
+-		priv->phyNum = 0;
+-		data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+-		TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
+-		TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN );
+-		return;
+-	}
+-
+-	if ( priv->phyNum == 0 ) {
+-		if ( ( priv->duplex == TLAN_DUPLEX_FULL ) || ( an_adv & an_lpa & 0x0040 ) ) {
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB | MII_GC_DUPLEX );
+-			printk( "TLAN:  Starting internal PHY with FULL-DUPLEX\n" );
+-		} else {
+-			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
+-			printk( "TLAN:  Starting internal PHY with HALF-DUPLEX\n" );
+-		}
+-	}
+-
+-	/* Wait for 100 ms.  No reason in partiticular.
+-	 */
+-	TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET );
+-		
+-} /* TLan_PhyFinishAutoNeg */
+-
+-#ifdef MONITOR
+-
+-        /*********************************************************************
+-        *
+-        *      TLan_phyMonitor
+-        *
+-        *      Returns: 
+-        *              None
+-        *
+-        *      Params:
+-        *              dev             The device structure of this device.
+-        *
+-        *      
+-        *      This function monitors PHY condition by reading the status
+-        *      register via the MII bus. This can be used to give info
+-        *      about link changes (up/down), and possible switch to alternate
+-        *      media.
+-        *
+-        * ******************************************************************/
+-
+-void TLan_PhyMonitor( struct net_device *dev )
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-	u16     phy;
+-	u16     phy_status;
+-
+-	phy = priv->phy[priv->phyNum];
+-
+-        /* Get PHY status register */
+-        TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status );
+-
+-        /* Check if link has been lost */
+-        if (!(phy_status & MII_GS_LINK)) { 
+- 	       if (priv->link) {
+-		      priv->link = 0;
+-	              printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
+-	              dev->flags &= ~IFF_RUNNING;
+-		      TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
+-		      return;
+-		}
+-	}
+-
+-        /* Link restablished? */
+-        if ((phy_status & MII_GS_LINK) && !priv->link) {
+- 		priv->link = 1;
+-        	printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
+-        	dev->flags |= IFF_RUNNING;
+-        }
+-
+-	/* Setup a new monitor */
+-	TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
+-}	
+-
+-#endif /* MONITOR */
+-
+-/*****************************************************************************
+-******************************************************************************
+-
+-	ThunderLAN Driver MII Routines
+-
+-	These routines are based on the information in Chap. 2 of the
+-	"ThunderLAN Programmer's Guide", pp. 15-24.
+-
+-******************************************************************************
+-*****************************************************************************/
+-
+-	/***************************************************************
+-	 *	TLan_MiiReadReg
+-	 *
+-	 *	Returns:
+-	 *		0	if ack received ok
+-	 *		1	otherwise.
+-	 *
+-	 *	Parms:
+-	 *		dev		The device structure containing
+-	 *				The io address and interrupt count
+-	 *				for this device.
+-	 *		phy		The address of the PHY to be queried.
+-	 *		reg		The register whose contents are to be
+-	 *				retreived.
+-	 *		val		A pointer to a variable to store the
+-	 *				retrieved value.
+-	 *
+-	 *	This function uses the TLAN's MII bus to retreive the contents
+-	 *	of a given register on a PHY.  It sends the appropriate info
+-	 *	and then reads the 16-bit register value from the MII bus via
+-	 *	the TLAN SIO register.
+-	 *
+-	 **************************************************************/
+-
+-int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+-{
+-	u8	nack;
+-	u16	sio, tmp;
+- 	u32	i;
+-	int	err;
+-	int	minten;
+-	TLanPrivateInfo *priv = dev->priv;
+-	unsigned long flags = 0;
+-
+-	err = FALSE;
+-	outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+-	sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+-	
+-	if (!in_irq())
+-		spin_lock_irqsave(&priv->lock, flags);
+-
+-	TLan_MiiSync(dev->base_addr);
+-
+-	minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
+-	if ( minten )
+-		TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
+-
+-	TLan_MiiSendData( dev->base_addr, 0x1, 2 );	/* Start ( 01b ) */
+-	TLan_MiiSendData( dev->base_addr, 0x2, 2 );	/* Read  ( 10b ) */
+-	TLan_MiiSendData( dev->base_addr, phy, 5 );	/* Device #      */
+-	TLan_MiiSendData( dev->base_addr, reg, 5 );	/* Register #    */
+-
+-	TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio);		/* Change direction */
+-
+-	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);		/* Clock Idle bit */
+-	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+-	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);		/* Wait 300ns */
+-
+-	nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio);	/* Check for ACK */
+-	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);		/* Finish ACK */
+-	if (nack) {					/* No ACK, so fake it */
+-		for (i = 0; i < 16; i++) {
+-			TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
+-			TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+-		}
+-		tmp = 0xffff;
+-		err = TRUE;
+-	} else {					/* ACK, so read data */
+-		for (tmp = 0, i = 0x8000; i; i >>= 1) {
+-			TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
+-			if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
+-				tmp |= i;
+-			TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+-		}
+-	}
+-
+-	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);		/* Idle cycle */
+-	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+-
+-	if ( minten )
+-		TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
+-
+-	*val = tmp;
+-	
+-	if (!in_irq())
+-		spin_unlock_irqrestore(&priv->lock, flags);
+-
+-	return err;
+-
+-} /* TLan_MiiReadReg */
+-
+-	/***************************************************************
+-	 *	TLan_MiiSendData
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		base_port	The base IO port of the adapter	in
+-	 *				question.
+-	 *		dev		The address of the PHY to be queried.
+-	 *		data		The value to be placed on the MII bus.
+-	 *		num_bits	The number of bits in data that are to
+-	 *				be placed on the MII bus.
+-	 *
+-	 *	This function sends on sequence of bits on the MII
+-	 *	configuration bus.
+-	 *
+-	 **************************************************************/
+-
+-void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
+-{
+-	u16 sio;
+-	u32 i;
+-
+-	if ( num_bits == 0 )
+-		return;
+-
+-	outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
+-	sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+-	TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
+-
+-	for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
+-		TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
+-		(void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+-		if ( data & i )
+-			TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
+-		else
+-			TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
+-		TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+-		(void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+-	}
+-
+-} /* TLan_MiiSendData */
+-
+-	/***************************************************************
+-	 *	TLan_MiiSync
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		base_port	The base IO port of the adapter in
+-	 *				question.
+-	 *
+-	 *	This functions syncs all PHYs in terms of the MII configuration
+-	 *	bus.
+-	 *
+-	 **************************************************************/
+-
+-void TLan_MiiSync( u16 base_port )
+-{
+-	int i;
+-	u16 sio;
+-
+-	outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
+-	sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+-
+-	TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
+-	for ( i = 0; i < 32; i++ ) {
+-		TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
+-		TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+-	}
+-
+-} /* TLan_MiiSync */
+-
+-	/***************************************************************
+-	 *	TLan_MiiWriteReg
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		dev		The device structure for the device
+-	 *				to write to.
+-	 *		phy		The address of the PHY to be written to.
+-	 *		reg		The register whose contents are to be
+-	 *				written.
+-	 *		val		The value to be written to the register.
+-	 *
+-	 *	This function uses the TLAN's MII bus to write the contents of a
+-	 *	given register on a PHY.  It sends the appropriate info and then
+-	 *	writes the 16-bit register value from the MII configuration bus
+-	 *	via the TLAN SIO register.
+-	 *
+-	 **************************************************************/
+-
+-void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
+-{
+-	u16	sio;
+-	int	minten;
+-	unsigned long flags = 0;
+-	TLanPrivateInfo *priv = dev->priv;
+-
+-	outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+-	sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+-	
+-	if (!in_irq())
+-		spin_lock_irqsave(&priv->lock, flags);
+-
+-	TLan_MiiSync( dev->base_addr );
+-
+-	minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
+-	if ( minten )
+-		TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
+-
+-	TLan_MiiSendData( dev->base_addr, 0x1, 2 );	/* Start ( 01b ) */
+-	TLan_MiiSendData( dev->base_addr, 0x1, 2 );	/* Write ( 01b ) */
+-	TLan_MiiSendData( dev->base_addr, phy, 5 );	/* Device #      */
+-	TLan_MiiSendData( dev->base_addr, reg, 5 );	/* Register #    */
+-
+-	TLan_MiiSendData( dev->base_addr, 0x2, 2 );	/* Send ACK */
+-	TLan_MiiSendData( dev->base_addr, val, 16 );	/* Send Data */
+-
+-	TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );	/* Idle cycle */
+-	TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+-
+-	if ( minten )
+-		TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
+-	
+-	if (!in_irq())
+-		spin_unlock_irqrestore(&priv->lock, flags);
+-
+-} /* TLan_MiiWriteReg */
+-#endif
+-
+-/**************************************************************************
+-RESET - Reset adapter
+-***************************************************************************/
+-static void skel_reset(struct nic *nic)
+-{
+-	/* put the card in its initial state */
+-}
+-
+-/**************************************************************************
+-POLL - Wait for a frame
+-***************************************************************************/
+-static int skel_poll(struct nic *nic)
+-{
+-	/* return true if there's an ethernet packet ready to read */
+-	/* nic->packet should contain data on return */
+-	/* nic->packetlen should contain length of data */
+-	return (0);	/* initially as this is called to flush the input */
+-}
+-
+-/**************************************************************************
+-TRANSMIT - Transmit a frame
+-***************************************************************************/
+-static void skel_transmit(
+-	struct nic *nic,
+-	const char *d,			/* Destination */
+-	unsigned int t,			/* Type */
+-	unsigned int s,			/* size */
+-	const char *p)			/* Packet */
+-{
+-	/* send the packet to destination */
+-}
+-
+-/**************************************************************************
+-DISABLE - Turn off ethernet interface
+-***************************************************************************/
+-static void skel_disable(struct nic *nic)
+-{
+-}
+-
+-/**************************************************************************
+-PROBE - Look for an adapter, this routine's visible to the outside
+-You should omit the last argument struct pci_device * for a non-PCI NIC
+-***************************************************************************/
+-struct nic *tlan_probe(struct nic *nic, unsigned short *probe_addrs,
+-	struct pci_device *p)
+-{
+-	/* if probe_addrs is 0, then routine can use a hardwired default */
+-	/* if board found */
+-	{
+-		/* point to NIC specific routines */
+-		nic->reset = skel_reset;
+-		nic->poll = skel_poll;
+-		nic->transmit = skel_transmit;
+-		nic->disable = skel_disable;
+-		return nic;
+-	}
+-	/* else */
+-	return 0;
+-}
+-
+-#if	0
+-#ifndef TLAN_H
+-#define TLAN_H
+-/********************************************************************
+- *
+- *  Linux ThunderLAN Driver
+- *
+- *  tlan.h
+- *  by James Banks
+- *
+- *  (C) 1997-1998 Caldera, Inc.
+- *  (C) 1999-2001 Torben Mathiasen
+- * 
+- *  This software may be used and distributed according to the terms
+- *  of the GNU General Public License, incorporated herein by reference.
+- *
+- ** This file is best viewed/edited with tabstop=4, colums>=132
+- *
+- *  
+- *  Dec 10, 1999	Torben Mathiasen <torben.mathiasen@compaq.com>
+- *			New Maintainer
+- *
+- ********************************************************************/
+-
+-#include <asm/io.h>
+-#include <asm/types.h>
+-#include <linux/netdevice.h>
+-
+-#define FALSE			0
+-#define TRUE			1
+-
+-#define TX_TIMEOUT		(10*HZ)	 /* We need time for auto-neg */
+-
+-typedef struct tlan_adapter_entry {
+-	u16	vendorId;
+-	u16	deviceId;
+-	char	*deviceLabel;
+-	u32	flags;
+-	u16	addrOfs;
+-} TLanAdapterEntry;
+-
+-	/*****************************************************************
+-	 * EISA Definitions
+-	 *
+-	 ****************************************************************/
+-
+-#define EISA_ID      0xc80   /* EISA ID Registers */ 
+-#define EISA_ID0     0xc80   /* EISA ID Register 0 */ 
+-#define EISA_ID1     0xc81   /* EISA ID Register 1 */ 
+-#define EISA_ID2     0xc82   /* EISA ID Register 2 */ 
+-#define EISA_ID3     0xc83   /* EISA ID Register 3 */ 
+-#define EISA_CR      0xc84   /* EISA Control Register */
+-#define EISA_REG0    0xc88   /* EISA Configuration Register 0 */
+-#define EISA_REG1    0xc89   /* EISA Configuration Register 1 */
+-#define EISA_REG2    0xc8a   /* EISA Configuration Register 2 */
+-#define EISA_REG3    0xc8f   /* EISA Configuration Register 3 */
+-#define EISA_APROM   0xc90   /* Ethernet Address PROM */
+-
+-	/*****************************************************************
+-	 * Rx/Tx List Definitions
+-	 *
+-	 ****************************************************************/
+-
+-typedef struct tlan_buffer_ref_tag {
+-	u32	count;
+-	u32	address;
+-} TLanBufferRef;
+-
+-typedef struct tlan_list_tag {
+-	u32		forward;
+-	u16		cStat;
+-	u16		frameSize;
+-	TLanBufferRef	buffer[TLAN_BUFFERS_PER_LIST];
+-} TLanList;
+-
+-typedef u8 TLanBuffer[TLAN_MAX_FRAME_SIZE];
+-
+-	/*****************************************************************
+-	 * TLAN Private Information Structure
+-	 *
+-	 ****************************************************************/
+-
+-typedef struct tlan_private_tag {
+-	struct net_device       *nextDevice;
+-	void			*dmaStorage;
+-	u8			*padBuffer;
+-	TLanList                *rxList;
+-	u8			*rxBuffer;
+-	u32                     rxHead;
+-	u32                     rxTail;
+-	u32			rxEocCount;
+-	TLanList                *txList;
+-	u8			*txBuffer;
+-	u32                     txHead;
+-	u32                     txInProgress;
+-	u32                     txTail;
+-	u32			txBusyCount;
+-	u32                     phyOnline;
+-	u32			timerSetAt;
+-	u32			timerType;
+-	struct timer_list	timer;
+-	struct net_device_stats	stats;
+-	struct board		*adapter;
+-	u32			adapterRev;
+-	u32			aui;
+-	u32			debug;
+-	u32			duplex;
+-	u32			phy[2];
+-	u32			phyNum;
+-	u32			speed;
+-	u8			tlanRev;
+-	u8			tlanFullDuplex;
+-	char                    devName[8];
+-	spinlock_t		lock;
+-	u8			link;
+-	u8			is_eisa;
+-	struct tq_struct	tlan_tqueue;
+-	u8			neg_be_verbose;
+-} TLanPrivateInfo;
+-
+-#define 	TLAN_HC_GO		0x80000000
+-#define		TLAN_HC_STOP		0x40000000
+-#define		TLAN_HC_ACK		0x20000000
+-#define		TLAN_HC_CS_MASK		0x1FE00000
+-#define		TLAN_HC_EOC		0x00100000
+-#define		TLAN_HC_RT		0x00080000
+-#define		TLAN_HC_NES		0x00040000
+-#define		TLAN_HC_AD_RST		0x00008000
+-#define		TLAN_HC_LD_TMR		0x00004000
+-#define		TLAN_HC_LD_THR		0x00002000
+-#define		TLAN_HC_REQ_INT		0x00001000
+-#define		TLAN_HC_INT_OFF		0x00000800
+-#define		TLAN_HC_INT_ON		0x00000400
+-#define		TLAN_HC_AC_MASK		0x000000FF
+-#define		TLAN_DA_ADR_INC		0x8000
+-#define		TLAN_DA_RAM_ADR		0x4000
+-#define		TLAN_HI_IV_MASK		0x1FE0
+-#define		TLAN_HI_IT_MASK		0x001C
+-
+-#define		TLAN_NET_CMD_NRESET	0x80
+-#define		TLAN_NET_CMD_NWRAP	0x40
+-#define		TLAN_NET_CMD_CSF	0x20
+-#define		TLAN_NET_CMD_CAF	0x10
+-#define		TLAN_NET_CMD_NOBRX	0x08
+-#define		TLAN_NET_CMD_DUPLEX	0x04
+-#define		TLAN_NET_CMD_TRFRAM	0x02
+-#define		TLAN_NET_CMD_TXPACE	0x01
+-#define 	TLAN_NET_SIO_MINTEN	0x80
+-#define		TLAN_NET_SIO_ECLOK	0x40
+-#define		TLAN_NET_SIO_ETXEN	0x20
+-#define		TLAN_NET_SIO_EDATA	0x10
+-#define		TLAN_NET_SIO_NMRST	0x08
+-#define		TLAN_NET_SIO_MCLK	0x04
+-#define		TLAN_NET_SIO_MTXEN	0x02
+-#define		TLAN_NET_SIO_MDATA	0x01
+-#define		TLAN_NET_STS_MIRQ	0x80
+-#define		TLAN_NET_STS_HBEAT	0x40
+-#define		TLAN_NET_STS_TXSTOP	0x20
+-#define		TLAN_NET_STS_RXSTOP	0x10
+-#define		TLAN_NET_STS_RSRVD	0x0F
+-#define		TLAN_NET_MASK_MASK7	0x80
+-#define		TLAN_NET_MASK_MASK6	0x40
+-#define		TLAN_NET_MASK_MASK5	0x20
+-#define		TLAN_NET_MASK_MASK4	0x10
+-#define		TLAN_NET_MASK_RSRVD	0x0F
+-#define 	TLAN_NET_CFG_RCLK	0x8000
+-#define		TLAN_NET_CFG_TCLK	0x4000
+-#define		TLAN_NET_CFG_BIT	0x2000
+-#define		TLAN_NET_CFG_RXCRC	0x1000
+-#define		TLAN_NET_CFG_PEF	0x0800
+-#define		TLAN_NET_CFG_1FRAG	0x0400
+-#define		TLAN_NET_CFG_1CHAN	0x0200
+-#define		TLAN_NET_CFG_MTEST	0x0100
+-#define		TLAN_NET_CFG_PHY_EN	0x0080
+-#define		TLAN_NET_CFG_MSMASK	0x007F
+-#define		TLAN_LED_ACT		0x10
+-#define		TLAN_LED_LINK		0x01
+-#define		TLAN_ID_TX_EOC		0x04
+-#define		TLAN_ID_RX_EOF		0x02
+-#define		TLAN_ID_RX_EOC		0x01
+-
+-#define CIRC_INC( a, b ) if ( ++a >= b ) a = 0
+-
+-#ifdef I_LIKE_A_FAST_HASH_FUNCTION
+-/* given 6 bytes, view them as 8 6-bit numbers and return the XOR of those */
+-/* the code below is about seven times as fast as the original code */
+-inline u32 TLan_HashFunc( u8 *a )
+-{
+-        u8     hash;
+-
+-        hash = (a[0]^a[3]);             /* & 077 */
+-        hash ^= ((a[0]^a[3])>>6);       /* & 003 */
+-        hash ^= ((a[1]^a[4])<<2);       /* & 074 */
+-        hash ^= ((a[1]^a[4])>>4);       /* & 017 */
+-        hash ^= ((a[2]^a[5])<<4);       /* & 060 */
+-        hash ^= ((a[2]^a[5])>>2);       /* & 077 */
+-
+-        return (hash & 077);
+-}
+-
+-#else /* original code */
+-
+-inline	u32	xor( u32 a, u32 b )
+-{
+-	return ( ( a && ! b ) || ( ! a && b ) );
+-}
+-#define XOR8( a, b, c, d, e, f, g, h )	xor( a, xor( b, xor( c, xor( d, xor( e, xor( f, xor( g, h ) ) ) ) ) ) )
+-#define DA( a, bit )					( ( (u8) a[bit/8] ) & ( (u8) ( 1 << bit%8 ) ) )
+-
+-inline u32 TLan_HashFunc( u8 *a )
+-{
+-	u32	hash;
+-
+-	hash  = XOR8( DA(a,0), DA(a, 6), DA(a,12), DA(a,18), DA(a,24), DA(a,30), DA(a,36), DA(a,42) );
+-	hash |= XOR8( DA(a,1), DA(a, 7), DA(a,13), DA(a,19), DA(a,25), DA(a,31), DA(a,37), DA(a,43) ) << 1;
+-	hash |= XOR8( DA(a,2), DA(a, 8), DA(a,14), DA(a,20), DA(a,26), DA(a,32), DA(a,38), DA(a,44) ) << 2;
+-	hash |= XOR8( DA(a,3), DA(a, 9), DA(a,15), DA(a,21), DA(a,27), DA(a,33), DA(a,39), DA(a,45) ) << 3;
+-	hash |= XOR8( DA(a,4), DA(a,10), DA(a,16), DA(a,22), DA(a,28), DA(a,34), DA(a,40), DA(a,46) ) << 4;
+-	hash |= XOR8( DA(a,5), DA(a,11), DA(a,17), DA(a,23), DA(a,29), DA(a,35), DA(a,41), DA(a,47) ) << 5;
+-
+-	return hash;
+-
+-} 
+-
+-#endif /* I_LIKE_A_FAST_HASH_FUNCTION */
+-#endif
+-/*******************************************************************************
+- *
+- *  Linux ThunderLAN Driver
+- *
+- *  tlan.c
+- *  by James Banks
+- *
+- *  (C) 1997-1998 Caldera, Inc.
+- *  (C) 1998 James Banks
+- *  (C) 1999-2001 Torben Mathiasen
+- *
+- *  This software may be used and distributed according to the terms
+- *  of the GNU General Public License, incorporated herein by reference.
+- *
+- ** This file is best viewed/edited with columns>=132.
+- *
+- ** Useful (if not required) reading:
+- *
+- *		Texas Instruments, ThunderLAN Programmer's Guide,
+- *			TI Literature Number SPWU013A
+- *			available in PDF format from www.ti.com
+- *		Level One, LXT901 and LXT970 Data Sheets
+- *			available in PDF format from www.level1.com
+- *		National Semiconductor, DP83840A Data Sheet
+- *			available in PDF format from www.national.com
+- *		Microchip Technology, 24C01A/02A/04A Data Sheet
+- *			available in PDF format from www.microchip.com
+- *
+- * Change History
+- *
+- *	Tigran Aivazian <tigran@sco.com>:	TLan_PciProbe() now uses
+- *						new PCI BIOS interface.
+- *	Alan Cox	<alan@redhat.com>:	Fixed the out of memory
+- *						handling.
+- *      
+- *	Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
+- *
+- *	v1.1 Dec 20, 1999    - Removed linux version checking
+- *			       Patch from Tigran Aivazian. 
+- *			     - v1.1 includes Alan's SMP updates.
+- *			     - We still have problems on SMP though,
+- *			       but I'm looking into that. 
+- *			
+- *	v1.2 Jan 02, 2000    - Hopefully fixed the SMP deadlock.
+- *			     - Removed dependency of HZ being 100.
+- *			     - We now allow higher priority timers to 
+- *			       overwrite timers like TLAN_TIMER_ACTIVITY
+- *			       Patch from John Cagle <john.cagle@compaq.com>.
+- *			     - Fixed a few compiler warnings.
+- *
+- *	v1.3 Feb 04, 2000    - Fixed the remaining HZ issues.
+- *			     - Removed call to pci_present(). 
+- *			     - Removed SA_INTERRUPT flag from irq handler.
+- *			     - Added __init and __initdata to reduce resisdent 
+- *			       code size.
+- *			     - Driver now uses module_init/module_exit.
+- *			     - Rewrote init_module and tlan_probe to
+- *			       share a lot more code. We now use tlan_probe
+- *			       with builtin and module driver.
+- *			     - Driver ported to new net API. 
+- *			     - tlan.txt has been reworked to reflect current 
+- *			       driver (almost)
+- *			     - Other minor stuff
+- *
+- *	v1.4 Feb 10, 2000    - Updated with more changes required after Dave's
+- *	                       network cleanup in 2.3.43pre7 (Tigran & myself)
+- *	                     - Minor stuff.
+- *
+- *	v1.5 March 22, 2000  - Fixed another timer bug that would hang the driver
+- *			       if no cable/link were present.
+- *			     - Cosmetic changes.
+- *			     - TODO: Port completely to new PCI/DMA API
+- *			     	     Auto-Neg fallback.
+- *
+- * 	v1.6 April 04, 2000  - Fixed driver support for kernel-parameters. Haven't
+- * 			       tested it though, as the kernel support is currently 
+- * 			       broken (2.3.99p4p3).
+- * 			     - Updated tlan.txt accordingly.
+- * 			     - Adjusted minimum/maximum frame length.
+- * 			     - There is now a TLAN website up at 
+- * 			       http://tlan.kernel.dk
+- *
+- * 	v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
+- * 			       reports PHY information when used with Donald
+- * 			       Beckers userspace MII diagnostics utility.
+- *
+- * 	v1.8 April 23, 2000  - Fixed support for forced speed/duplex settings.
+- * 			     - Added link information to Auto-Neg and forced
+- * 			       modes. When NIC operates with auto-neg the driver
+- * 			       will report Link speed & duplex modes as well as
+- * 			       link partner abilities. When forced link is used,
+- * 			       the driver will report status of the established
+- * 			       link.
+- * 			       Please read tlan.txt for additional information. 
+- * 			     - Removed call to check_region(), and used 
+- * 			       return value of request_region() instead.
+- *	
+- *	v1.8a May 28, 2000   - Minor updates.
+- *
+- *	v1.9 July 25, 2000   - Fixed a few remaining Full-Duplex issues.
+- *	                     - Updated with timer fixes from Andrew Morton.
+- *	                     - Fixed module race in TLan_Open.
+- *	                     - Added routine to monitor PHY status.
+- *	                     - Added activity led support for Proliant devices.
+- *
+- *	v1.10 Aug 30, 2000   - Added support for EISA based tlan controllers 
+- *			       like the Compaq NetFlex3/E. 
+- *			     - Rewrote tlan_probe to better handle multiple
+- *			       bus probes. Probing and device setup is now
+- *			       done through TLan_Probe and TLan_init_one. Actual
+- *			       hardware probe is done with kernel API and 
+- *			       TLan_EisaProbe.
+- *			     - Adjusted debug information for probing.
+- *			     - Fixed bug that would cause general debug information 
+- *			       to be printed after driver removal. 
+- *			     - Added transmit timeout handling.
+- *			     - Fixed OOM return values in tlan_probe. 
+- *			     - Fixed possible mem leak in tlan_exit 
+- *			       (now tlan_remove_one).
+- *			     - Fixed timer bug in TLan_phyMonitor.
+- *			     - This driver version is alpha quality, please
+- *			       send me any bug issues you may encounter.
+- *
+- *	v1.11 Aug 31, 2000   - Do not try to register irq 0 if no irq line was 
+- *			       set for EISA cards.
+- *			     - Added support for NetFlex3/E with nibble-rate
+- *			       10Base-T PHY. This is untestet as I haven't got
+- *			       one of these cards.
+- *			     - Fixed timer being added twice.
+- *			     - Disabled PhyMonitoring by default as this is
+- *			       work in progress. Define MONITOR to enable it.
+- *			     - Now we don't display link info with PHYs that
+- *			       doesn't support it (level1).
+- *			     - Incresed tx_timeout beacuse of auto-neg.
+- *			     - Adjusted timers for forced speeds.
+- *
+- *	v1.12 Oct 12, 2000   - Minor fixes (memleak, init, etc.)
+- *
+- * 	v1.13 Nov 28, 2000   - Stop flooding console with auto-neg issues
+- * 			       when link can't be established.
+- *			     - Added the bbuf option as a kernel parameter.
+- *			     - Fixed ioaddr probe bug.
+- *			     - Fixed stupid deadlock with MII interrupts.
+- *			     - Added support for speed/duplex selection with 
+- *			       multiple nics.
+- *			     - Added partly fix for TX Channel lockup with
+- *			       TLAN v1.0 silicon. This needs to be investigated
+- *			       further.
+- *
+- * 	v1.14 Dec 16, 2000   - Added support for servicing multiple frames per.
+- * 			       interrupt. Thanks goes to
+- * 			       Adam Keys <adam@ti.com>
+- * 			       Denis Beaudoin <dbeaudoin@ti.com>
+- * 			       for providing the patch.
+- * 			     - Fixed auto-neg output when using multiple
+- * 			       adapters.
+- * 			     - Converted to use new taskq interface.
+- *
+- * 	v1.14a Jan 6, 2001   - Minor adjustments (spinlocks, etc.)
+- *
+- *******************************************************************************/
+-
+-                                                                                
+-#include <linux/module.h>
+-
+-#include "tlan.h"
+-
+-#include <linux/init.h>
+-#include <linux/ioport.h>
+-#include <linux/pci.h>
+-#include <linux/etherdevice.h>
+-#include <linux/delay.h>
+-#include <linux/spinlock.h>
+-#include <linux/mii.h>
+-
+-typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 );
+-
+-/* For removing EISA devices */
+-static	struct net_device	*TLan_Eisa_Devices;
+-
+-static	int		TLanDevicesInstalled;
+-
+-/* Set speed, duplex and aui settings */
+-static  int aui[MAX_TLAN_BOARDS];
+-static  int duplex[MAX_TLAN_BOARDS];
+-static  int speed[MAX_TLAN_BOARDS];
+-static  int boards_found;
+-
+-MODULE_AUTHOR("Maintainer: Torben Mathiasen <torben.mathiasen@compaq.com>");
+-MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
+-MODULE_LICENSE("GPL");
+-
+-MODULE_PARM(aui, "1-" __MODULE_STRING(MAX_TLAN_BOARDS) "i");
+-MODULE_PARM(duplex, "1-" __MODULE_STRING(MAX_TLAN_BOARDS) "i");
+-MODULE_PARM(speed, "1-" __MODULE_STRING(MAX_TLAN_BOARDS) "i");
+-MODULE_PARM(debug, "i");
+-MODULE_PARM(bbuf, "i");
+-MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
+-MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
+-MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
+-MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
+-MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)");
+-EXPORT_NO_SYMBOLS;
+-
+-/* Define this to enable Link beat monitoring */
+-#undef MONITOR
+-
+-/* Turn on debugging. See linux/Documentation/networking/tlan.txt for details */
+-static  int		debug;
+-
+-static	int		bbuf;
+-static	u8		*TLanPadBuffer;
+-static	char		TLanSignature[] = "TLAN";
+-static const char tlan_banner[] = "ThunderLAN driver v1.14a\n";
+-static int tlan_have_pci;
+-static int tlan_have_eisa;
+-
+-const char *media[] = {
+-	"10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ", 
+-	"100baseTx-FD", "100baseT4", 0
+-};
+-
+-int media_map[] = { 0x0020, 0x0040, 0x0080, 0x0100, 0x0200,};
+-
+-static struct board {
+-	const char	*deviceLabel;
+-	u32	   	flags;
+-	u16	   	addrOfs;
+-} board_info[] __devinitdata = {
+-	{ "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+-	{ "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+-	{ "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
+-	{ "Compaq NetFlex-3/P", TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+-	{ "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
+-	{ "Compaq Netelligent Integrated 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+-	{ "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
+-	{ "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
+-	{ "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
+-	{ "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
+-	{ "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
+-	{ "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+-	{ "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
+-	{ "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED | 	/* EISA card */
+-	                        TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },	
+-	{ "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
+-};
+-
+-static struct pci_device_id tlan_pci_tbl[] __devinitdata = {
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
+-	{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+-	{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
+-	{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
+-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
+-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
+-	{ 0,}
+-};
+-MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);		
+-
+-static void	TLan_EisaProbe( void );
+-static void	TLan_Eisa_Cleanup( void );
+-static int      TLan_Init( struct net_device * );
+-static int	TLan_Open( struct net_device *dev );
+-static int	TLan_StartTx( struct sk_buff *, struct net_device *);
+-static void	TLan_HandleInterrupt( int, void *, struct pt_regs *);
+-static int	TLan_Close( struct net_device *);
+-static struct	net_device_stats *TLan_GetStats( struct net_device *);
+-static void	TLan_SetMulticastList( struct net_device *);
+-static int	TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
+-static int      TLan_probe1( struct pci_dev *pdev, long ioaddr, int irq, int rev, const struct pci_device_id *ent);
+-static void	TLan_tx_timeout( struct net_device *dev);
+-static int 	tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
+-
+-static u32	TLan_HandleInvalid( struct net_device *, u16 );
+-static u32	TLan_HandleTxEOF( struct net_device *, u16 );
+-static u32	TLan_HandleStatOverflow( struct net_device *, u16 );
+-static u32	TLan_HandleRxEOF( struct net_device *, u16 );
+-static u32	TLan_HandleDummy( struct net_device *, u16 );
+-static u32	TLan_HandleTxEOC( struct net_device *, u16 );
+-static u32	TLan_HandleStatusCheck( struct net_device *, u16 );
+-static u32	TLan_HandleRxEOC( struct net_device *, u16 );
+-
+-static void	TLan_Timer( unsigned long );
+-
+-static void	TLan_ResetLists( struct net_device * );
+-static void	TLan_FreeLists( struct net_device * );
+-static void	TLan_PrintDio( u16 );
+-static void	TLan_PrintList( TLanList *, char *, int );
+-static void	TLan_ReadAndClearStats( struct net_device *, int );
+-static void	TLan_ResetAdapter( struct net_device * );
+-static void	TLan_FinishReset( struct net_device * );
+-static void	TLan_SetMac( struct net_device *, int areg, char *mac );
+-
+-static void	TLan_PhyPrint( struct net_device * );
+-static void	TLan_PhyDetect( struct net_device * );
+-static void	TLan_PhyPowerDown( struct net_device * );
+-static void	TLan_PhyPowerUp( struct net_device * );
+-static void	TLan_PhyReset( struct net_device * );
+-static void	TLan_PhyStartLink( struct net_device * );
+-static void	TLan_PhyFinishAutoNeg( struct net_device * );
+-#ifdef MONITOR
+-static void     TLan_PhyMonitor( struct net_device * );
+-#endif
+-
+-/*
+-static int	TLan_PhyNop( struct net_device * );
+-static int	TLan_PhyInternalCheck( struct net_device * );
+-static int	TLan_PhyInternalService( struct net_device * );
+-static int	TLan_PhyDp83840aCheck( struct net_device * );
+-*/
+-
+-static int	TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
+-static void	TLan_MiiSendData( u16, u32, unsigned );
+-static void	TLan_MiiSync( u16 );
+-static void	TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
+-
+-static void	TLan_EeSendStart( u16 );
+-static int	TLan_EeSendByte( u16, u8, int );
+-static void	TLan_EeReceiveByte( u16, u8 *, int );
+-static int	TLan_EeReadByte( struct net_device *, u8, u8 * );
+-
+-static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
+-	TLan_HandleInvalid,
+-	TLan_HandleTxEOF,
+-	TLan_HandleStatOverflow,
+-	TLan_HandleRxEOF,
+-	TLan_HandleDummy,
+-	TLan_HandleTxEOC,
+-	TLan_HandleStatusCheck,
+-	TLan_HandleRxEOC
+-};
+-
+-static inline void
+-TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type )
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-	unsigned long flags = 0;
+-	
+-	if (!in_irq())
+-		spin_lock_irqsave(&priv->lock, flags);
+-	if ( priv->timer.function != NULL &&
+-		priv->timerType != TLAN_TIMER_ACTIVITY ) { 
+-		if (!in_irq())
+-			spin_unlock_irqrestore(&priv->lock, flags);
+-		return;
+-	}
+-	priv->timer.function = &TLan_Timer;
+-	if (!in_irq())
+-		spin_unlock_irqrestore(&priv->lock, flags);
+-
+-	priv->timer.data = (unsigned long) dev;
+-	priv->timerSetAt = jiffies;
+-	priv->timerType = type;
+-	mod_timer(&priv->timer, jiffies + ticks);
+-	
+-} /* TLan_SetTimer */
+-
+-/*****************************************************************************
+-******************************************************************************
+-
+-	ThunderLAN Driver Primary Functions
+-
+-	These functions are more or less common to all Linux network drivers.
+-
+-******************************************************************************
+-*****************************************************************************/
+-
+-	/***************************************************************
+-	 *	tlan_remove_one
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		None
+-	 *
+-	 *	Goes through the TLanDevices list and frees the device
+-	 *	structs and memory associated with each device (lists
+-	 *	and buffers).  It also ureserves the IO port regions
+-	 *	associated with this device.
+-	 *
+-	 **************************************************************/
+-
+-static void __devexit tlan_remove_one( struct pci_dev *pdev)
+-{
+-	struct net_device *dev = pci_get_drvdata( pdev );
+-	TLanPrivateInfo	*priv = dev->priv;
+-	
+-	unregister_netdev( dev );
+-
+-	if ( priv->dmaStorage ) {
+-		kfree( priv->dmaStorage );
+-	}
+-
+-	release_region( dev->base_addr, 0x10 );
+-	
+-	kfree( dev );
+-		
+-	pci_set_drvdata( pdev, NULL );
+-} 
+-
+-static struct pci_driver tlan_driver = {
+-	name:		"tlan",
+-	id_table:	tlan_pci_tbl,
+-	probe:		tlan_init_one,
+-	remove:		tlan_remove_one,	
+-};
+-
+-static int __init tlan_probe(void)
+-{
+-	static int	pad_allocated;
+-	
+-	printk(KERN_INFO "%s", tlan_banner);
+-	
+-	TLanPadBuffer = (u8 *) kmalloc(TLAN_MIN_FRAME_SIZE, 
+-					GFP_KERNEL);
+-
+-	if (TLanPadBuffer == NULL) {
+-		printk(KERN_ERR "TLAN: Could not allocate memory for pad buffer.\n");
+-		return -ENOMEM;
+-	}
+-
+-	memset(TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE);
+-	pad_allocated = 1;
+-
+-	TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
+-	
+-	/* Use new style PCI probing. Now the kernel will
+-	   do most of this for us */
+-	pci_register_driver(&tlan_driver);
+-
+-	TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
+-	TLan_EisaProbe();
+-		
+-	printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d  EISA: %d\n", 
+-		 TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
+-		 tlan_have_pci, tlan_have_eisa);
+-
+-	if (TLanDevicesInstalled == 0) {
+-		pci_unregister_driver(&tlan_driver);
+-		kfree(TLanPadBuffer);
+-		return -ENODEV;
+-	}
+-	return 0;
+-}
+-	
+-
+-static int __devinit tlan_init_one( struct pci_dev *pdev,
+-				    const struct pci_device_id *ent)
+-{
+-	return TLan_probe1( pdev, -1, -1, 0, ent);
+-}
+-
+-/*
+-	***************************************************************
+-	 *	tlan_probe1
+-	 *
+-	 *	Returns:
+-	 *		0 on success, error code on error
+-	 *	Parms: 
+-	 *		none
+-	 *
+-	 *	The name is lower case to fit in with all the rest of
+-	 *	the netcard_probe names.  This function looks for 
+-	 *	another TLan based adapter, setting it up with the
+-	 *	allocated device struct if one is found.
+-	 *	tlan_probe has been ported to the new net API and
+-	 *	now allocates its own device structure. This function
+-	 *	is also used by modules.
+-	 *
+-	 **************************************************************/
+-
+-static int __devinit TLan_probe1(struct pci_dev *pdev, 
+-				long ioaddr, int irq, int rev, const struct pci_device_id *ent )
+-{
+-
+-	struct net_device  *dev;
+-	TLanPrivateInfo    *priv;
+-	u8		   pci_rev;
+-	u16		   device_id;
+-	int		   reg;
+-
+-	if (pdev && pci_enable_device(pdev))
+-		return -EIO;
+-
+-	dev = init_etherdev(NULL, sizeof(TLanPrivateInfo));
+-	if (dev == NULL) {
+-		printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
+-		return -ENOMEM;
+-	}
+-	SET_MODULE_OWNER(dev);
+-	
+-	priv = dev->priv;
+-
+-	/* Is this a PCI device? */
+-	if (pdev) {
+-		u32 		   pci_io_base = 0;
+-
+-		priv->adapter = &board_info[ent->driver_data];
+-
+-		pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
+-
+-		for ( reg= 0; reg <= 5; reg ++ ) {
+-			if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
+-				pci_io_base = pci_resource_start(pdev, reg);
+-				TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n",
+-						pci_io_base);
+-				break;
+-			}
+-		}
+-		if (!pci_io_base) {
+-			printk(KERN_ERR "TLAN: No IO mappings available\n");
+-			unregister_netdev(dev);
+-			kfree(dev);
+-			return -ENODEV;
+-		}
+-		
+-		dev->base_addr = pci_io_base;
+-		dev->irq = pdev->irq;
+-		priv->adapterRev = pci_rev; 
+-		pci_set_master(pdev);
+-		pci_set_drvdata(pdev, dev);
+-
+-	} else	{     /* EISA card */
+-		/* This is a hack. We need to know which board structure
+-		 * is suited for this adapter */
+-		device_id = inw(ioaddr + EISA_ID2);
+-		priv->is_eisa = 1;
+-		if (device_id == 0x20F1) {
+-			priv->adapter = &board_info[13]; 	/* NetFlex-3/E */
+-			priv->adapterRev = 23;			/* TLAN 2.3 */
+-		} else {
+-			priv->adapter = &board_info[14];
+-			priv->adapterRev = 10;			/* TLAN 1.0 */
+-		}
+-		dev->base_addr = ioaddr;
+-		dev->irq = irq;
+-	}
+-
+-	/* Kernel parameters */
+-	if (dev->mem_start) {
+-		priv->aui    = dev->mem_start & 0x01;
+-		priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0 : (dev->mem_start & 0x06) >> 1;
+-		priv->speed  = ((dev->mem_start & 0x18) == 0x18) ? 0 : (dev->mem_start & 0x18) >> 3;
+-	
+-		if (priv->speed == 0x1) {
+-			priv->speed = TLAN_SPEED_10;
+-		} else if (priv->speed == 0x2) {
+-			priv->speed = TLAN_SPEED_100;
+-		}
+-		debug = priv->debug = dev->mem_end;
+-	} else {
+-		priv->aui    = aui[boards_found];
+-		priv->speed  = speed[boards_found];
+-		priv->duplex = duplex[boards_found];
+-		priv->debug = debug;
+-	}
+-	
+-	/* This will be used when we get an adapter error from
+-	 * within our irq handler */
+-	INIT_LIST_HEAD(&priv->tlan_tqueue.list);
+-	priv->tlan_tqueue.sync = 0;
+-	priv->tlan_tqueue.routine = (void *)(void*)TLan_tx_timeout;
+-	priv->tlan_tqueue.data = dev;
+-
+-	spin_lock_init(&priv->lock);
+-	
+-	if (TLan_Init(dev)) {
+-		printk(KERN_ERR "TLAN: Could not register device.\n");
+-		unregister_netdev(dev);
+-		kfree(dev);
+-		return -EAGAIN;
+-	} else {
+-	
+-	TLanDevicesInstalled++;
+-	boards_found++;
+-	
+-	/* pdev is NULL if this is an EISA device */
+-	if (pdev)
+-		tlan_have_pci++;
+-	else {
+-		priv->nextDevice = TLan_Eisa_Devices;
+-		TLan_Eisa_Devices = dev;
+-		tlan_have_eisa++;
+-	}
+-	
+-	printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
+-			dev->name,
+-			(int) dev->irq,
+-			(int) dev->base_addr,
+-			priv->adapter->deviceLabel,
+-			priv->adapterRev);
+-	return 0;
+-	}
+-
+-}
++}	/* TLan_FinishReset */
+ 
+-static void TLan_Eisa_Cleanup(void)
+-{
+-	struct net_device *dev;
+-	TLanPrivateInfo *priv;
+-	
+-	while( tlan_have_eisa ) {
+-		dev = TLan_Eisa_Devices;
+-		priv = dev->priv;
+-		if (priv->dmaStorage) {
+-			kfree(priv->dmaStorage);
+-		}
+-		release_region( dev->base_addr, 0x10);
+-		unregister_netdev( dev );
+-		TLan_Eisa_Devices = priv->nextDevice;
+-		kfree( dev );
+-		tlan_have_eisa--;
+-	}
+-}
+-	
+-		
+-static void __exit tlan_exit(void)
+-{
+-	pci_unregister_driver(&tlan_driver);
+-
+-	if (tlan_have_eisa)
+-		TLan_Eisa_Cleanup();
+-
+-	kfree( TLanPadBuffer );
+-
+-}
+-
+-/* Module loading/unloading */
+-module_init(tlan_probe);
+-module_exit(tlan_exit);
+-
+-	/**************************************************************
+-	 * 	TLan_EisaProbe
+-	 *
+-	 *  	Returns: 0 on success, 1 otherwise
+-	 *
+-	 *  	Parms:	 None
+-	 *
+-	 *
+-	 *  	This functions probes for EISA devices and calls 
+-	 *  	TLan_probe1 when one is found. 
+-	 *
+-	 *************************************************************/
+-
+-static void  __init TLan_EisaProbe (void) 
++/**************************************************************************
++POLL - Wait for a frame
++***************************************************************************/
++static int tlan_poll(struct nic *nic, int retrieve)
+ {
+-	long 	ioaddr;
+-	int 	rc = -ENODEV;
+-	int 	irq;
+-	u16	device_id;
+-
+-	if (!EISA_bus) {	
+-		TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
+-		return;
+-	}
+-	
+-	/* Loop through all slots of the EISA bus */
+-	for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
+-		
+-	TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));	
+-	TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
++	/* return true if there's an ethernet packet ready to read */
++	/* nic->packet should contain data on return */
++	/* nic->packetlen should contain length of data */
++	u32 framesize;
++	u32 host_cmd = 0;
++	u32 ack = 1;
++	int eoc = 0;
++	int entry = priv->cur_rx % TLAN_NUM_RX_LISTS;
++	u16 tmpCStat = le32_to_cpu(rx_ring[entry].cStat);
++	u16 host_int = inw(BASE + TLAN_HOST_INT);
+ 
+-		TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
+-				   	(int) ioaddr);
+-		if (request_region(ioaddr, 0x10, TLanSignature) == NULL) 
+-			goto out;
+-
+-		if (inw(ioaddr + EISA_ID) != 0x110E) {		
+-			release_region(ioaddr, 0x10);
+-			goto out;
+-		}
+-		
+-		device_id = inw(ioaddr + EISA_ID2);
+-		if (device_id !=  0x20F1 && device_id != 0x40F1) { 		
+-			release_region (ioaddr, 0x10);
+-			goto out;
+-		}
+-		
+-	 	if (inb(ioaddr + EISA_CR) != 0x1) { 	/* Check if adapter is enabled */
+-			release_region (ioaddr, 0x10);
+-			goto out2;
+-		}
+-		
+-		if (debug == 0x10)		
+-			printk("Found one\n");
++	if ((tmpCStat & TLAN_CSTAT_FRM_CMP) && !retrieve)
++	  return 1;
+ 
+-		/* Get irq from board */
+-		switch (inb(ioaddr + 0xCC0)) {
+-			case(0x10):
+-				irq=5;
+-				break;
+-			case(0x20):
+-				irq=9;
+-				break;
+-			case(0x40):
+-				irq=10;
+-				break;
+-			case(0x80):
+-				irq=11;
+-				break;
+-			default:
+-				goto out;
+-		}               
+-		
+-		
+-		/* Setup the newly found eisa adapter */
+-		rc = TLan_probe1( NULL, ioaddr, irq,
+-					12, NULL);
+-		continue;
+-		
+-		out:
+-			if (debug == 0x10)
+-				printk("None found\n");
+-			continue;
+-
+-		out2:	if (debug == 0x10)
+-				printk("Card found but it is not enabled, skipping\n");
+-			continue;
+-		
+-	}
++	outw(host_int, BASE + TLAN_HOST_INT);
+ 
+-} /* TLan_EisaProbe */
++	if (!(tmpCStat & TLAN_CSTAT_FRM_CMP))
++		return 0;
+ 
+-	
++	/* printf("PI-1: 0x%hX\n", host_int); */
++	if (tmpCStat & TLAN_CSTAT_EOC)
++		eoc = 1;
+ 
+-	/***************************************************************
+-	 *	TLan_Init
+-	 *
+-	 *	Returns:
+-	 *		0 on success, error code otherwise.
+-	 *	Parms:
+-	 *		dev	The structure of the device to be
+-	 *			init'ed.
+-	 *
+-	 *	This function completes the initialization of the
+-	 *	device structure and driver.  It reserves the IO
+-	 *	addresses, allocates memory for the lists and bounce
+-	 *	buffers, retrieves the MAC address from the eeprom
+-	 *	and assignes the device's methods.
+-	 *	
+-	 **************************************************************/
++	framesize = rx_ring[entry].frameSize;
+ 
+-static int TLan_Init( struct net_device *dev )
+-{
+-	int		dma_size;
+-	int 		err;
+-	int		i;
+-	TLanPrivateInfo	*priv;
++	nic->packetlen = framesize;
+ 
+-	priv = dev->priv;
+-	
+-	if (!priv->is_eisa)	/* EISA devices have already requested IO */
+-		if (!request_region( dev->base_addr, 0x10, TLanSignature )) {
+-			printk(KERN_ERR "TLAN: %s: IO port region 0x%lx size 0x%x in use.\n",
+-				dev->name,
+-				dev->base_addr,
+-				0x10 );
+-			return -EIO;
++#ifdef EBDEBUG
++     printf(".%d.", framesize); 
++#endif
++     
++	memcpy(nic->packet, rxb +
++	       (priv->cur_rx * TLAN_MAX_FRAME_SIZE), nic->packetlen);
++
++	rx_ring[entry].cStat = 0;
++#ifdef EBDEBUG
++	//hex_dump(nic->packet, nic->packetlen);
++	printf("%d", entry);  
++#endif
++	entry = (entry + 1) % TLAN_NUM_RX_LISTS;
++	priv->cur_rx = entry;
++	if (eoc) {
++		if ((rx_ring[entry].cStat & TLAN_CSTAT_READY) ==
++		    TLAN_CSTAT_READY) {
++			ack |= TLAN_HC_GO | TLAN_HC_RT;
++			host_cmd = TLAN_HC_ACK | ack | 0x001C0000;
++			outl(host_cmd, BASE + TLAN_HOST_CMD);
+ 		}
+-	
+-	if ( bbuf ) {
+-		dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
+-	           * ( sizeof(TLanList) + TLAN_MAX_FRAME_SIZE );
+ 	} else {
+-		dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
+-	           * ( sizeof(TLanList) );
+-	}
+-	priv->dmaStorage = kmalloc(dma_size, GFP_KERNEL | GFP_DMA);
+-	if ( priv->dmaStorage == NULL ) {
+-		printk(KERN_ERR "TLAN:  Could not allocate lists and buffers for %s.\n",
+-			dev->name );
+-		release_region( dev->base_addr, 0x10 );
+-		return -ENOMEM;
+-	}
+-	memset( priv->dmaStorage, 0, dma_size );
+-	priv->rxList = (TLanList *) 
+-		       ( ( ( (u32) priv->dmaStorage ) + 7 ) & 0xFFFFFFF8 );
+-	priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
+-	if ( bbuf ) {
+-		priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
+-		priv->txBuffer = priv->rxBuffer
+-				 + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+-	}
+-
+-	err = 0;
+-	for ( i = 0;  i < 6 ; i++ )
+-		err |= TLan_EeReadByte( dev,
+-					(u8) priv->adapter->addrOfs + i,
+-					(u8 *) &dev->dev_addr[i] );
+-	if ( err ) {
+-		printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
+-			dev->name,
+-			err );
+-	}
+-	dev->addr_len = 6;
+-	
+-	/* Device methods */
+-	dev->open = &TLan_Open;
+-	dev->hard_start_xmit = &TLan_StartTx;
+-	dev->stop = &TLan_Close;
+-	dev->get_stats = &TLan_GetStats;
+-	dev->set_multicast_list = &TLan_SetMulticastList;
+-	dev->do_ioctl = &TLan_ioctl;
+-	dev->tx_timeout = &TLan_tx_timeout;
+-	dev->watchdog_timeo = TX_TIMEOUT;
+-
+-	return 0;
+-
+-} /* TLan_Init */
+-
+-	/***************************************************************
+-	 *	TLan_Open
+-	 *
+-	 *	Returns:
+-	 *		0 on success, error code otherwise.
+-	 *	Parms:
+-	 *		dev	Structure of device to be opened.
+-	 *
+-	 *	This routine puts the driver and TLAN adapter in a
+-	 *	state where it is ready to send and receive packets.
+-	 *	It allocates the IRQ, resets and brings the adapter
+-	 *	out of reset, and allows interrupts.  It also delays
+-	 *	the startup for autonegotiation or sends a Rx GO
+-	 *	command to the adapter, as appropriate.
+-	 *
+-	 **************************************************************/
+-
+-static int TLan_Open( struct net_device *dev )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	int		err;
+-	
+-	priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
+-	err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev );
+-	
+-	if ( err ) {
+-		printk(KERN_ERR "TLAN:  Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
+-		return err;
++		host_cmd = TLAN_HC_ACK | ack | (0x000C0000);
++		outl(host_cmd, BASE + TLAN_HOST_CMD);
++#ifdef EBDEBUG
++		printf("AC: 0x%hX\n", inw(BASE + TLAN_CH_PARM)); 
++		host_int = inw(BASE + TLAN_HOST_INT);
++		printf("PI-2: 0x%hX\n", host_int); 
++#endif
+ 	}
+-	
+-	init_timer(&priv->timer);
+-	netif_start_queue(dev);
+-	
+-	/* NOTE: It might not be necessary to read the stats before a
+-			 reset if you don't care what the values are.
+-	*/
+-	TLan_ResetLists( dev );
+-	TLan_ReadAndClearStats( dev, TLAN_IGNORE );
+-	TLan_ResetAdapter( dev );
+-
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened.  TLAN Chip Rev: %x\n", dev->name, priv->tlanRev );
+-
+-	return 0;
+-
+-} /* TLan_Open */
+-
+-	/**************************************************************
+-	 *	TLan_ioctl
+-	 *	
+-	 *	Returns:
+-	 *		0 on success, error code otherwise
+-	 *	Params:
+-	 *		dev	structure of device to receive ioctl.
+-	 *		
+-	 *		rq	ifreq structure to hold userspace data.
+-	 *
+-	 *		cmd	ioctl command.
+-	 *
+-	 *
+-	 *************************************************************/
++	refill_rx(nic);
++	return (1);		/* initially as this is called to flush the input */
++}
+ 
+-static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++static void refill_rx(struct nic *nic __unused)
+ {
+-	TLanPrivateInfo *priv = dev->priv;
+-	struct mii_ioctl_data *data = (struct mii_ioctl_data *)&rq->ifr_data;
+-	u32 phy   = priv->phy[priv->phyNum];
+-	
+-	if (!priv->phyOnline)
+-		return -EAGAIN;
+-
+-	switch(cmd) {
+-	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+-	case SIOCDEVPRIVATE:		/* for binary compat, remove in 2.5 */
+-			data->phy_id = phy;
+-
+-	case SIOCGMIIREG:		/* Read MII PHY register. */
+-	case SIOCDEVPRIVATE+1:		/* for binary compat, remove in 2.5 */
+-			TLan_MiiReadReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, &data->val_out);
+-			return 0;
+-		
++	int entry = 0;
+ 
+-	case SIOCSMIIREG:		/* Write MII PHY register. */
+-	case SIOCDEVPRIVATE+2:		/* for binary compat, remove in 2.5 */
+-			if (!capable(CAP_NET_ADMIN))
+-				return -EPERM;
+-			TLan_MiiWriteReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+-			return 0;
+-		default:
+-			return -EOPNOTSUPP;
++	for (;
++	     (priv->cur_rx - priv->dirty_rx +
++	      TLAN_NUM_RX_LISTS) % TLAN_NUM_RX_LISTS > 0;
++	     priv->dirty_rx = (priv->dirty_rx + 1) % TLAN_NUM_RX_LISTS) {
++		entry = priv->dirty_rx % TLAN_NUM_TX_LISTS;
++		rx_ring[entry].frameSize = TLAN_MAX_FRAME_SIZE;
++		rx_ring[entry].cStat = TLAN_CSTAT_READY;
+ 	}
+-} /* tlan_ioctl */
+-
+-	/***************************************************************
+-	 * 	TLan_tx_timeout
+-	 *
+-	 * 	Returns: nothing
+-	 *
+-	 * 	Params:
+-	 * 		dev	structure of device which timed out 
+-	 * 			during transmit.
+-	 *
+-	 **************************************************************/
+-
+-static void TLan_tx_timeout(struct net_device *dev)
+-{
+-	
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
+-	
+-	/* Ok so we timed out, lets see what we can do about it...*/
+-	TLan_FreeLists( dev );
+-	TLan_ResetLists( dev );		
+-	TLan_ReadAndClearStats( dev, TLAN_IGNORE );
+-	TLan_ResetAdapter( dev );
+-	dev->trans_start = jiffies;
+-	netif_wake_queue( dev );	
+ 
+ }
+-	
+ 
+-	/***************************************************************
+-	 *	TLan_StartTx
+-	 *  
+-	 *	Returns:
+-	 *		0 on success, non-zero on failure.
+-	 *	Parms:
+-	 *		skb	A pointer to the sk_buff containing the
+-	 *			frame to be sent.
+-	 *		dev	The device to send the data on.
+-	 *
+-	 *	This function adds a frame to the Tx list to be sent
+-	 *	ASAP.  First it	verifies that the adapter is ready and
+-	 *	there is room in the queue.  Then it sets up the next
+-	 *	available list, copies the frame to the	corresponding
+-	 *	buffer.  If the adapter Tx channel is idle, it gives
+-	 *	the adapter a Tx Go command on the list, otherwise it
+-	 *	sets the forward address of the previous list to point
+-	 *	to this one.  Then it frees the sk_buff.
+-	 *
+-	 **************************************************************/
++/* #define EBDEBUG */
++/**************************************************************************
++TRANSMIT - Transmit a frame
++***************************************************************************/
++static void tlan_transmit(struct nic *nic, const char *d,	/* Destination */
++			  unsigned int t,	/* Type */
++			  unsigned int s,	/* size */
++			  const char *p)
++{				/* Packet */
++	u16 nstype;
++	u32 to;
++	struct TLanList *tail_list;
++	struct TLanList *head_list;
++	u8 *tail_buffer;
++	u32 ack = 0;
++	u32 host_cmd;
++	int eoc = 0;
++	u16 tmpCStat;
++#ifdef EBDEBUG
++	u16 host_int = inw(BASE + TLAN_HOST_INT);
++#endif
++	int entry = 0;
+ 
+-static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-	TLanList	*tail_list;
+-	u8		*tail_buffer;
+-	int		pad;
+-	unsigned long	flags;
+-
+-	if ( ! priv->phyOnline ) {
+-		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n", dev->name );
+-		dev_kfree_skb_any(skb);
+-		return 0;
++#ifdef EBDEBUG
++	printf("INT0-0x%hX\n", host_int);
++#endif
++
++	if (!priv->phyOnline) {
++		printf("TRANSMIT:  %s PHY is not ready\n", priv->nic_name);
++		return;
+ 	}
+ 
+ 	tail_list = priv->txList + priv->txTail;
+-	
+-	if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
+-		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s is busy (Head=%d Tail=%d)\n", dev->name, priv->txHead, priv->txTail );
+-		netif_stop_queue(dev);
++
++	if (tail_list->cStat != TLAN_CSTAT_UNUSED) {
++		printf("TRANSMIT: %s is busy (Head=%d Tail=%d)\n",
++		       priv->nic_name, priv->txList, priv->txTail);
++		tx_ring[entry].cStat = TLAN_CSTAT_UNUSED;
+ 		priv->txBusyCount++;
+-		return 1;
++		return;
+ 	}
+ 
+ 	tail_list->forward = 0;
+ 
+-	if ( bbuf ) {
+-		tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
+-		memcpy( tail_buffer, skb->data, skb->len );
+-	} else {
+-		tail_list->buffer[0].address = virt_to_bus( skb->data );
+-		tail_list->buffer[9].address = (u32) skb;
+-	}
++	tail_buffer = txb + (priv->txTail * TLAN_MAX_FRAME_SIZE);
+ 
+-	pad = TLAN_MIN_FRAME_SIZE - skb->len;
+-
+-	if ( pad > 0 ) {
+-		tail_list->frameSize = (u16) skb->len + pad;
+-		tail_list->buffer[0].count = (u32) skb->len;
+-		tail_list->buffer[1].count = TLAN_LAST_BUFFER | (u32) pad;
+-		tail_list->buffer[1].address = virt_to_bus( TLanPadBuffer );
+-	} else {
+-		tail_list->frameSize = (u16) skb->len;
+-		tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+-		tail_list->buffer[1].count = 0;
+-		tail_list->buffer[1].address = 0;
+-	}
++	/* send the packet to destination */
++	memcpy(tail_buffer, d, ETH_ALEN);
++	memcpy(tail_buffer + ETH_ALEN, nic->node_addr, ETH_ALEN);
++	nstype = htons((u16) t);
++	memcpy(tail_buffer + 2 * ETH_ALEN, (u8 *) & nstype, 2);
++	memcpy(tail_buffer + ETH_HLEN, p, s);
++
++	s += ETH_HLEN;
++	s &= 0x0FFF;
++	while (s < ETH_ZLEN)
++		tail_buffer[s++] = '\0';
++
++	/*=====================================================*/
++	/* Receive
++	 * 0000 0000 0001 1100
++	 * 0000 0000 0000 1100
++	 * 0000 0000 0000 0011 = 0x0003
++	 *
++	 * 0000 0000 0000 0000 0000 0000 0000 0011
++	 * 0000 0000 0000 1100 0000 0000 0000 0000 = 0x000C0000
++	 *
++	 * Transmit
++	 * 0000 0000 0001 1100
++	 * 0000 0000 0000 0100
++	 * 0000 0000 0000 0001 = 0x0001
++	 *
++	 * 0000 0000 0000 0000 0000 0000 0000 0001
++	 * 0000 0000 0000 0100 0000 0000 0000 0000 = 0x00040000
++	 * */
++
++	/* Setup the transmit descriptor */
++	tail_list->frameSize = (u16) s;
++	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) s;
++	tail_list->buffer[1].count = 0;
++	tail_list->buffer[1].address = 0;
+ 
+-	spin_lock_irqsave(&priv->lock, flags);
+ 	tail_list->cStat = TLAN_CSTAT_READY;
+-	if ( ! priv->txInProgress ) {
++
++#ifdef EBDEBUG
++	host_int = inw(BASE + TLAN_HOST_INT);
++	printf("INT1-0x%hX\n", host_int);
++#endif
++
++	if (!priv->txInProgress) {
+ 		priv->txInProgress = 1;
+-		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Starting TX on buffer %d\n", priv->txTail );
+-		outl( virt_to_bus( tail_list ), dev->base_addr + TLAN_CH_PARM );
+-		outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
++		outl(virt_to_le32desc(tail_list), BASE + TLAN_CH_PARM);
++		outl(TLAN_HC_GO, BASE + TLAN_HOST_CMD);
+ 	} else {
+-		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Adding buffer %d to TX channel\n", priv->txTail );
+-		if ( priv->txTail == 0 ) {
+-			( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward = virt_to_bus( tail_list );
++		if (priv->txTail == 0) {
++#ifdef EBDEBUG
++			printf("Out buffer\n");
++#endif
++			(priv->txList + (TLAN_NUM_TX_LISTS - 1))->forward =
++			    virt_to_le32desc(tail_list);
+ 		} else {
+-			( priv->txList + ( priv->txTail - 1 ) )->forward = virt_to_bus( tail_list );
++#ifdef EBDEBUG
++			printf("Fix this \n");
++#endif
++			(priv->txList + (priv->txTail - 1))->forward =
++			    virt_to_le32desc(tail_list);
+ 		}
+ 	}
+-	spin_unlock_irqrestore(&priv->lock, flags);
+-
+-	CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
+-
+-	if ( bbuf )
+-		dev_kfree_skb_any(skb);
+-		
+-	dev->trans_start = jiffies;
+-	return 0;
+-
+-} /* TLan_StartTx */
+-
+-	/***************************************************************
+-	 *	TLan_HandleInterrupt
+-	 *  
+-	 *	Returns:	
+-	 *		Nothing
+-	 *	Parms:
+-	 *		irq	The line on which the interrupt
+-	 *			occurred.
+-	 *		dev_id	A pointer to the device assigned to
+-	 *			this irq line.
+-	 *		regs	???
+-	 *
+-	 *	This function handles an interrupt generated by its
+-	 *	assigned TLAN adapter.  The function deactivates
+-	 *	interrupts on its adapter, records the type of
+-	 *	interrupt, executes the appropriate subhandler, and
+-	 *	acknowdges the interrupt to the adapter (thus
+-	 *	re-enabling adapter interrupts.
+-	 *
+-	 **************************************************************/
+-
+-static void TLan_HandleInterrupt(int irq, void *dev_id, struct pt_regs *regs)
+-{
+-	u32		ack;
+-	struct net_device	*dev;
+-	u32		host_cmd;
+-	u16		host_int;
+-	int		type;
+-	TLanPrivateInfo *priv;
+-
+-	dev = dev_id;
+-	priv = dev->priv;
+-
+-	spin_lock(&priv->lock);
+-
+-	host_int = inw( dev->base_addr + TLAN_HOST_INT );
+-	outw( host_int, dev->base_addr + TLAN_HOST_INT );
++	
++	CIRC_INC(priv->txTail, TLAN_NUM_TX_LISTS);
+ 
+-	type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
++#ifdef EBDEBUG
++	host_int = inw(BASE + TLAN_HOST_INT);
++	printf("INT2-0x%hX\n", host_int);
++#endif
+ 
+-	ack = TLanIntVector[type]( dev, host_int );
++	to = currticks() + TX_TIME_OUT;
++	while ((tail_list->cStat == TLAN_CSTAT_READY) && currticks() < to);
+ 
+-	if ( ack ) {
+-		host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
+-		outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
++	head_list = priv->txList + priv->txHead;
++	while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) 
++			&& (ack < 255)) {
++		ack++;
++		if(tmpCStat & TLAN_CSTAT_EOC)
++			eoc =1;
++		head_list->cStat = TLAN_CSTAT_UNUSED;
++		CIRC_INC(priv->txHead, TLAN_NUM_TX_LISTS);
++		head_list = priv->txList + priv->txHead;
++		
+ 	}
++	if(!ack)
++		printf("Incomplete TX Frame\n");
+ 
+-	spin_unlock(&priv->lock);
+-
+-} /* TLan_HandleInterrupts */
+-
+-	/***************************************************************
+-	 *	TLan_Close
+-	 *  
+-	 * 	Returns:
+-	 *		An error code.
+-	 *	Parms:
+-	 *		dev	The device structure of the device to
+-	 *			close.
+-	 *
+-	 *	This function shuts down the adapter.  It records any
+-	 *	stats, puts the adapter into reset state, deactivates
+-	 *	its time as needed, and	frees the irq it is using.
+-	 *
+-	 **************************************************************/
+-
+-static int TLan_Close(struct net_device *dev)
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-
+-	netif_stop_queue(dev);
+-	priv->neg_be_verbose = 0;
+-
+-	TLan_ReadAndClearStats( dev, TLAN_RECORD );
+-	outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
+-	if ( priv->timer.function != NULL ) {
+-		del_timer_sync( &priv->timer );
+-		priv->timer.function = NULL;
++	if(eoc) {
++		head_list = priv->txList + priv->txHead;
++		if ((head_list->cStat & TLAN_CSTAT_READY) == TLAN_CSTAT_READY) {
++			outl(virt_to_le32desc(head_list), BASE + TLAN_CH_PARM);
++			ack |= TLAN_HC_GO;
++		} else {
++			priv->txInProgress = 0;
++		}
+ 	}
+-	
+-	free_irq( dev->irq, dev );
+-	TLan_FreeLists( dev );
+-	TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name );
+-
+-	return 0;
+-
+-} /* TLan_Close */
+-
+-	/***************************************************************
+-	 *	TLan_GetStats
+-	 *  
+-	 *	Returns:
+-	 *		A pointer to the device's statistics structure.
+-	 *	Parms:
+-	 *		dev	The device structure to return the
+-	 *			stats for.
+-	 *
+-	 *	This function updates the devices statistics by reading
+-	 *	the TLAN chip's onboard registers.  Then it returns the
+-	 *	address of the statistics structure.
+-	 *
+-	 **************************************************************/
+-
+-static struct net_device_stats *TLan_GetStats( struct net_device *dev )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	int i;
+-
+-	/* Should only read stats if open ? */
+-	TLan_ReadAndClearStats( dev, TLAN_RECORD );
+-
+-	TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  %s EOC count = %d\n", dev->name, priv->rxEocCount );
+-	TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s Busy count = %d\n", dev->name, priv->txBusyCount );
+-	if ( debug & TLAN_DEBUG_GNRL ) {
+-		TLan_PrintDio( dev->base_addr );
+-		TLan_PhyPrint( dev );		
+-	}
+-	if ( debug & TLAN_DEBUG_LIST ) {
+-		for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
+-			TLan_PrintList( priv->rxList + i, "RX", i );
+-		for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
+-			TLan_PrintList( priv->txList + i, "TX", i );
++	if(ack) {
++		host_cmd = TLAN_HC_ACK | ack;
++		outl(host_cmd, BASE + TLAN_HOST_CMD);
+ 	}
+ 	
+-	return ( &( (TLanPrivateInfo *) dev->priv )->stats );
+-
+-} /* TLan_GetStats */
+-
+-	/***************************************************************
+-	 *	TLan_SetMulticastList
+-	 *  
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		dev	The device structure to set the
+-	 *			multicast list for.
+-	 *
+-	 *	This function sets the TLAN adaptor to various receive
+-	 *	modes.  If the IFF_PROMISC flag is set, promiscuous
+-	 *	mode is acitviated.  Otherwise,	promiscuous mode is
+-	 *	turned off.  If the IFF_ALLMULTI flag is set, then
+-	 *	the hash table is set to receive all group addresses.
+-	 *	Otherwise, the first three multicast addresses are
+-	 *	stored in AREG_1-3, and the rest are selected via the
+-	 *	hash table, as necessary.
+-	 *
+-	 **************************************************************/
+-
+-static void TLan_SetMulticastList( struct net_device *dev )
+-{	
+-	struct dev_mc_list	*dmi = dev->mc_list;
+-	u32			hash1 = 0;
+-	u32			hash2 = 0;
+-	int			i;
+-	u32			offset;
+-	u8			tmp;
+-
+-	if ( dev->flags & IFF_PROMISC ) {
+-		tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
+-		TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
+-	} else {
+-		tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
+-		TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
+-		if ( dev->flags & IFF_ALLMULTI ) {
+-			for ( i = 0; i < 3; i++ ) 
+-				TLan_SetMac( dev, i + 1, NULL );
+-			TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
+-			TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
++	if(priv->tlanRev < 0x30 ) {
++		ack = 1;
++		head_list = priv->txList + priv->txHead;
++		if ((head_list->cStat & TLAN_CSTAT_READY) == TLAN_CSTAT_READY) {
++			outl(virt_to_le32desc(head_list), BASE + TLAN_CH_PARM);
++			ack |= TLAN_HC_GO;
+ 		} else {
+-			for ( i = 0; i < dev->mc_count; i++ ) {
+-				if ( i < 3 ) {
+-					TLan_SetMac( dev, i + 1, (char *) &dmi->dmi_addr );
+-				} else {
+-					offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
+-					if ( offset < 32 ) 
+-						hash1 |= ( 1 << offset );
+-					else
+-						hash2 |= ( 1 << ( offset - 32 ) );
+-				}
+-				dmi = dmi->next;
+-			}
+-			for ( ; i < 3; i++ ) 
+-				TLan_SetMac( dev, i + 1, NULL );
+-			TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
+-			TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
++			priv->txInProgress = 0;
+ 		}
++		host_cmd = TLAN_HC_ACK | ack | 0x00140000;
++		outl(host_cmd, BASE + TLAN_HOST_CMD);
++		
+ 	}
++			
++	if (currticks() >= to) {
++		printf("TX Time Out");
++	}
++}
+ 
+-} /* TLan_SetMulticastList */
+-
+-/*****************************************************************************
+-******************************************************************************
+-
+-        ThunderLAN Driver Interrupt Vectors and Table
+-
+-	Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
+-	Programmer's Guide" for more informations on handling interrupts
+-	generated by TLAN based adapters.  
+-
+-******************************************************************************
+-*****************************************************************************/
+-
+-	/***************************************************************
+-	 *	TLan_HandleInvalid
+-	 *
+-	 *	Returns:
+-	 *		0
+-	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This function handles invalid interrupts.  This should
+-	 *	never happen unless some other adapter is trying to use
+-	 *	the IRQ line assigned to the device.
+-	 *
+-	 **************************************************************/
+-
+-u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
++/**************************************************************************
++DISABLE - Turn off ethernet interface
++***************************************************************************/
++#ifdef EB51
++static void tlan_disable(struct dev *dev __unused)
++#else
++static void tlan_disable(struct nic *nic __unused)
++#endif
+ {
+-	/* printk( "TLAN:  Invalid interrupt on %s.\n", dev->name ); */
+-	return 0;
+-
+-} /* TLan_HandleInvalid */
+-
+-	/***************************************************************
+-	 *	TLan_HandleTxEOF
+-	 *
+-	 *	Returns:
+-	 *		1
+-	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This function handles Tx EOF interrupts which are raised
+-	 *	by the adapter when it has completed sending the
+-	 *	contents of a buffer.  If detemines which list/buffer
+-	 *	was completed and resets it.  If the buffer was the last
+-	 *	in the channel (EOC), then the function checks to see if
+-	 *	another buffer is ready to send, and if so, sends a Tx
+-	 *	Go command.  Finally, the driver activates/continues the
+-	 *	activity LED.
++	/* put the card in its initial state */
++	/* This function serves 3 purposes.
++	 * This disables DMA and interrupts so we don't receive
++	 *  unexpected packets or interrupts from the card after
++	 *  etherboot has finished.
++	 * This frees resources so etherboot may use
++	 *  this driver on another interface
++	 * This allows etherboot to reinitialize the interface
++	 *  if something is something goes wrong.
+ 	 *
+-	 **************************************************************/
++	 */
++	outl(TLAN_HC_AD_RST, BASE + TLAN_HOST_CMD);
++}
+ 
+-u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
++/**************************************************************************
++IRQ - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void tlan_irq(struct nic *nic __unused, irq_action_t action __unused)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	int		eoc = 0;
+-	TLanList	*head_list;
+-	u32		ack = 0;
+-	u16		tmpCStat;
+-	
+-	TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOF (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
+-	head_list = priv->txList + priv->txHead;
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
+ 
+-	while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
+-		ack++;
+-		if ( ! bbuf ) {
+-			dev_kfree_skb_any( (struct sk_buff *) head_list->buffer[9].address );
+-			head_list->buffer[9].address = 0;
+-		}
+-	
+-		if ( tmpCStat & TLAN_CSTAT_EOC )
+-			eoc = 1;
+-			
+-		priv->stats.tx_bytes += head_list->frameSize;
++static void TLan_SetMulticastList(struct nic *nic) {
++	int i;
++	u8 tmp;
+ 
+-		head_list->cStat = TLAN_CSTAT_UNUSED;
+-		netif_start_queue(dev);		
+-		CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS ); 
+-		head_list = priv->txList + priv->txHead;
+-	}
++	/* !IFF_PROMISC */
++	tmp = TLan_DioRead8(BASE, TLAN_NET_CMD);
++	TLan_DioWrite8(BASE, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF);
++
++	/* IFF_ALLMULTI */
++	for(i = 0; i< 3; i++)
++		TLan_SetMac(nic, i + 1, NULL);
++	TLan_DioWrite32(BASE, TLAN_HASH_1, 0xFFFFFFFF);
++	TLan_DioWrite32(BASE, TLAN_HASH_2, 0xFFFFFFFF);
+ 
+-	if (!ack)
+-		printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
+-	
+-	if ( eoc ) {
+-		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOC (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
+-		head_list = priv->txList + priv->txHead;
+-		if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
+-			outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+-			ack |= TLAN_HC_GO;
+-		} else {
+-			priv->txInProgress = 0;
+-		}
+-	}
+ 	
+-	if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
+-		TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+-		if ( priv->timer.function == NULL ) {
+-			 priv->timer.function = &TLan_Timer;
+-			 priv->timer.data = (unsigned long) dev;
+-			 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+-			 priv->timerSetAt = jiffies;
+-			 priv->timerType = TLAN_TIMER_ACTIVITY;
+-			 add_timer(&priv->timer);
+-		} else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
+-			priv->timerSetAt = jiffies;
++}
++/**************************************************************************
++PROBE - Look for an adapter, this routine's visible to the outside
++***************************************************************************/
++
++#define board_found 1
++#define valid_link 0
++#ifdef EB51
++static int tlan_probe(struct dev *dev, struct pci_device *pci)
++{
++	struct nic *nic = (struct nic *) dev;
++#else
++struct nic *tlan_probe(struct nic *nic, unsigned short *io_addrs, struct pci_device *pci)
++{
++#endif
++		u16 data = 0;
++	int err;
++	int i;
++
++	if (pci->ioaddr == 0)
++		return 0;
++
++	nic->irqno  = 0;
++	nic->ioaddr = pci->ioaddr & ~3;
++
++	BASE = pci->ioaddr;
++	printf("\n");
++	printf("tlan.c: %s, %s\n", drv_version, drv_date);
++	printf("%s: Probing for Vendor 0x%hX, Device 0x%hX",
++	       pci->name, pci->vendor, pci->dev_id);
++
++
++	/* I really must find out what this does */
++	adjust_pci_device(pci);
++
++	/* Point to private storage */
++	priv = &TLanPrivateInfo;
++	/* Figure out which chip we're dealing with */
++	i = 0;
++	chip_idx = -1;
++
++	while (tlan_pci_tbl[i].name) {
++		if ((((u32) pci->dev_id << 16) | pci->vendor) ==
++		    (tlan_pci_tbl[i].id.pci & 0xffffffff)) {
++			chip_idx = i;
++			break;
+ 		}
++		i++;
+ 	}
+ 
+-	return ack;
++	priv->vendor_id = pci->vendor;
++	priv->dev_id = pci->dev_id;
++	priv->nic_name = pci->name;
++	priv->eoc = 0;
+ 
+-} /* TLan_HandleTxEOF */
++	err = 0;
++	for (i = 0; i < 6; i++)
++		err |= TLan_EeReadByte(BASE,
++				       (u8) tlan_pci_tbl[chip_idx].
++				       addrOfs + i,
++				       (u8 *) & nic->node_addr[i]);
++	if (err) {
++		printf("TLAN: %s: Error reading MAC from eeprom: %d\n",
++		       pci->name, err);
++	} else
++		printf("\nAddress: %!\n", nic->node_addr);
+ 
+-	/***************************************************************
+-	 *	TLan_HandleStatOverflow
+-	 *
+-	 *	Returns:
+-	 *		1
+-	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This function handles the Statistics Overflow interrupt
+-	 *	which means that one or more of the TLAN statistics
+-	 *	registers has reached 1/2 capacity and needs to be read.
+-	 *
+-	 **************************************************************/
++	priv->tlanRev = TLan_DioRead8(BASE, TLAN_DEF_REVISION);
++	printf("\nRevision = 0x%hX\n", priv->tlanRev);
+ 
+-u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
+-{
+-	TLan_ReadAndClearStats( dev, TLAN_RECORD );
++	TLan_ResetLists(nic);
++	TLan_ResetAdapter(nic);
++/*
++	data = inl(BASE + TLAN_HOST_CMD);
++	data |= TLAN_HC_EOC;
++	outw(data, BASE + TLAN_HOST_CMD);
++*/
++
++	data = inl(BASE + TLAN_HOST_CMD);
++	data |= TLAN_HC_INT_OFF;
++	outw(data, BASE + TLAN_HOST_CMD);
+ 
++	TLan_SetMulticastList(nic);
++	udelay(100); 
++	priv->txList = tx_ring;
++	priv->rxList = rx_ring;
++/*	if (board_found && valid_link)
++	{*/
++	/* point to NIC specific routines */
++#ifdef EB51
++	dev->disable = tlan_disable;
++	nic->poll = tlan_poll;
++	nic->transmit = tlan_transmit;
++	nic->irq    = tlan_irq;
+ 	return 1;
++#else
++	nic->disable = tlan_disable;
++	nic->poll = tlan_poll;
++	nic->transmit = tlan_transmit;
++	nic->irq    = tlan_irq;
++	return nic;
++#endif
++}
++
++
++/*****************************************************************************
++******************************************************************************
++
++	ThunderLAN Driver Eeprom routines
++
++	The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
++	EEPROM.  These functions are based on information in Microchip's
++	data sheet.  I don't know how well this functions will work with
++	other EEPROMs.
++
++******************************************************************************
++*****************************************************************************/
+ 
+-} /* TLan_HandleStatOverflow */
+ 
+ 	/***************************************************************
+-	 *	TLan_HandleRxEOF
++	 *	TLan_EeSendStart
+ 	 *
+ 	 *	Returns:
+-	 *		1
++	 *		Nothing
+ 	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This function handles the Rx EOF interrupt which
+-	 *	indicates a frame has been received by the adapter from
+-	 *	the net and the frame has been transferred to memory.
+-	 *	The function determines the bounce buffer the frame has
+-	 *	been loaded into, creates a new sk_buff big enough to
+-	 *	hold the frame, and sends it to protocol stack.  It
+-	 *	then resets the used buffer and appends it to the end
+-	 *	of the list.  If the frame was the last in the Rx
+-	 *	channel (EOC), the function restarts the receive channel
+-	 *	by sending an Rx Go command to the adapter.  Then it
+-	 *	activates/continues the activity LED.
++	 *		io_base		The IO port base address for the
++	 *				TLAN device with the EEPROM to
++	 *				use.
++	 *
++	 *	This function sends a start cycle to an EEPROM attached
++	 *	to a TLAN chip.
+ 	 *
+ 	 **************************************************************/
+ 
+-u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
++void TLan_EeSendStart(u16 io_base)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u32		ack = 0;
+-	int		eoc = 0;
+-	u8		*head_buffer;
+-	TLanList	*head_list;
+-	struct sk_buff	*skb;
+-	TLanList	*tail_list;
+-	void		*t;
+-	u32		frameSize;
+-	u16		tmpCStat;
+-
+-	TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOF (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
+-	head_list = priv->rxList + priv->rxHead;
+-	
+-	while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
+-		frameSize = head_list->frameSize;
+-		ack++;
+-		if (tmpCStat & TLAN_CSTAT_EOC)
+-			eoc = 1;
+-		
+-		if (bbuf) {
+-			skb = dev_alloc_skb(frameSize + 7);
+-			if (skb == NULL)
+-				printk(KERN_INFO "TLAN: Couldn't allocate memory for received data.\n");
+-			else {
+-				head_buffer = priv->rxBuffer + (priv->rxHead * TLAN_MAX_FRAME_SIZE);
+-				skb->dev = dev;
+-				skb_reserve(skb, 2);
+-				t = (void *) skb_put(skb, frameSize);
+-		
+-				priv->stats.rx_bytes += head_list->frameSize;
+-
+-				memcpy( t, head_buffer, frameSize );
+-				skb->protocol = eth_type_trans( skb, dev );
+-				netif_rx( skb );
+-			}
+-		} else {
+-			struct sk_buff *new_skb;
+-		
+-			/*
+-		 	*	I changed the algorithm here. What we now do
+-		 	*	is allocate the new frame. If this fails we
+-		 	*	simply recycle the frame.
+-		 	*/
+-		
+-			new_skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
+-			
+-			if ( new_skb != NULL ) {
+-				/* If this ever happened it would be a problem */
+-				/* not any more - ac */
+-				skb = (struct sk_buff *) head_list->buffer[9].address;
+-				skb_trim( skb, frameSize );
+-
+-				priv->stats.rx_bytes += frameSize;
++	u16 sio;
+ 
+-				skb->protocol = eth_type_trans( skb, dev );
+-				netif_rx( skb );
+-	
+-				new_skb->dev = dev;
+-				skb_reserve( new_skb, 2 );
+-				t = (void *) skb_put( new_skb, TLAN_MAX_FRAME_SIZE );
+-				head_list->buffer[0].address = virt_to_bus( t );
+-				head_list->buffer[8].address = (u32) t;
+-				head_list->buffer[9].address = (u32) new_skb;
+-			} else 
+-				printk(KERN_WARNING "TLAN:  Couldn't allocate memory for received data.\n" );
+-		}
++	outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
++	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+ 
+-		head_list->forward = 0;
+-		head_list->cStat = 0;
+-		tail_list = priv->rxList + priv->rxTail;
+-		tail_list->forward = virt_to_bus( head_list );
+-
+-		CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS );
+-		CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS );
+-		head_list = priv->rxList + priv->rxHead;
+-	}
++	TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++	TLan_SetBit(TLAN_NET_SIO_EDATA, sio);
++	TLan_SetBit(TLAN_NET_SIO_ETXEN, sio);
++	TLan_ClearBit(TLAN_NET_SIO_EDATA, sio);
++	TLan_ClearBit(TLAN_NET_SIO_ECLOK, sio);
+ 
+-	if (!ack)
+-		printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
+-	
++}				/* TLan_EeSendStart */
+ 
+-	if ( eoc ) { 
+-		TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOC (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
+-		head_list = priv->rxList + priv->rxHead;
+-		outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+-		ack |= TLAN_HC_GO | TLAN_HC_RT;
+-		priv->rxEocCount++;
+-	}
+-
+-	if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
+-		TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+-		if ( priv->timer.function == NULL )  {
+-			priv->timer.function = &TLan_Timer;
+-			priv->timer.data = (unsigned long) dev;
+-			priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+-			priv->timerSetAt = jiffies;
+-			priv->timerType = TLAN_TIMER_ACTIVITY;
+-			add_timer(&priv->timer);
+-		} else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
+-			priv->timerSetAt = jiffies;
+-		}
+-	}
+ 
+-	dev->last_rx = jiffies;
+-	
+-	return ack;
+ 
+-} /* TLan_HandleRxEOF */
+ 
+ 	/***************************************************************
+-	 *	TLan_HandleDummy
++	 *	TLan_EeSendByte
+ 	 *
+ 	 *	Returns:
+-	 *		1
+-	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This function handles the Dummy interrupt, which is
+-	 *	raised whenever a test interrupt is generated by setting
+-	 *	the Req_Int bit of HOST_CMD to 1.
++	 *		If the correct ack was received, 0, otherwise 1
++	 *	Parms:	io_base		The IO port base address for the
++	 *				TLAN device with the EEPROM to
++	 *				use.
++	 *		data		The 8 bits of information to
++	 *				send to the EEPROM.
++	 *		stop		If TLAN_EEPROM_STOP is passed, a
++	 *				stop cycle is sent after the
++	 *				byte is sent after the ack is
++	 *				read.
++	 *
++	 *	This function sends a byte on the serial EEPROM line,
++	 *	driving the clock to send each bit. The function then
++	 *	reverses transmission direction and reads an acknowledge
++	 *	bit.
+ 	 *
+ 	 **************************************************************/
+ 
+-u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
++int TLan_EeSendByte(u16 io_base, u8 data, int stop)
+ {
+-	printk( "TLAN:  Test interrupt on %s.\n", dev->name );
+-	return 1;
++	int err;
++	u8 place;
++	u16 sio;
+ 
+-} /* TLan_HandleDummy */
++	outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
++	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+ 
+-	/***************************************************************
+-	 *	TLan_HandleTxEOC
+-	 *
+-	 *	Returns:
+-	 *		1
+-	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This driver is structured to determine EOC occurances by
+-	 *	reading the CSTAT member of the list structure.  Tx EOC
+-	 *	interrupts are disabled via the DIO INTDIS register.
+-	 *	However, TLAN chips before revision 3.0 didn't have this
+-	 *	functionality, so process EOC events if this is the
+-	 *	case.
+-	 *
+-	 **************************************************************/
++	/* Assume clock is low, tx is enabled; */
++	for (place = 0x80; place != 0; place >>= 1) {
++		if (place & data)
++			TLan_SetBit(TLAN_NET_SIO_EDATA, sio);
++		else
++			TLan_ClearBit(TLAN_NET_SIO_EDATA, sio);
++		TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++		TLan_ClearBit(TLAN_NET_SIO_ECLOK, sio);
++	}
++	TLan_ClearBit(TLAN_NET_SIO_ETXEN, sio);
++	TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++	err = TLan_GetBit(TLAN_NET_SIO_EDATA, sio);
++	TLan_ClearBit(TLAN_NET_SIO_ECLOK, sio);
++	TLan_SetBit(TLAN_NET_SIO_ETXEN, sio);
+ 
+-u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
+-{
+-	TLanPrivateInfo	*priv = dev->priv;
+-	TLanList		*head_list;
+-	u32			ack = 1;
+-	
+-	host_int = 0;
+-	if ( priv->tlanRev < 0x30 ) {
+-		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOC (Head=%d Tail=%d) -- IRQ\n", priv->txHead, priv->txTail );
+-		head_list = priv->txList + priv->txHead;
+-		if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
+-			netif_stop_queue(dev);
+-			outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+-			ack |= TLAN_HC_GO;
+-		} else {
+-			priv->txInProgress = 0;
+-		}
++	if ((!err) && stop) {
++		TLan_ClearBit(TLAN_NET_SIO_EDATA, sio);	/* STOP, raise data while clock is high */
++		TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++		TLan_SetBit(TLAN_NET_SIO_EDATA, sio);
+ 	}
+ 
+-	return ack;
++	return (err);
++
++}				/* TLan_EeSendByte */
++
++
+ 
+-} /* TLan_HandleTxEOC */
+ 
+ 	/***************************************************************
+-	 *	TLan_HandleStatusCheck
++	 *	TLan_EeReceiveByte
+ 	 *
+ 	 *	Returns:
+-	 *		0 if Adapter check, 1 if Network Status check.
++	 *		Nothing
+ 	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This function handles Adapter Check/Network Status
+-	 *	interrupts generated by the adapter.  It checks the
+-	 *	vector in the HOST_INT register to determine if it is
+-	 *	an Adapter Check interrupt.  If so, it resets the
+-	 *	adapter.  Otherwise it clears the status registers
+-	 *	and services the PHY.
++	 *		io_base		The IO port base address for the
++	 *				TLAN device with the EEPROM to
++	 *				use.
++	 *		data		An address to a char to hold the
++	 *				data sent from the EEPROM.
++	 *		stop		If TLAN_EEPROM_STOP is passed, a
++	 *				stop cycle is sent after the
++	 *				byte is received, and no ack is
++	 *				sent.
++	 *
++	 *	This function receives 8 bits of data from the EEPROM
++	 *	over the serial link.  It then sends and ack bit, or no
++	 *	ack and a stop bit.  This function is used to retrieve
++	 *	data after the address of a byte in the EEPROM has been
++	 *	sent.
+ 	 *
+ 	 **************************************************************/
+ 
+-u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
+-{	
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u32		ack;
+-	u32		error;
+-	u8		net_sts;
+-	u32		phy;
+-	u16		tlphy_ctl;
+-	u16		tlphy_sts;
+-	
+-	ack = 1;
+-	if ( host_int & TLAN_HI_IV_MASK ) {
+-		netif_stop_queue( dev );
+-		error = inl( dev->base_addr + TLAN_CH_PARM );
+-		printk( "TLAN:  %s: Adaptor Error = 0x%x\n", dev->name, error );
+-		TLan_ReadAndClearStats( dev, TLAN_RECORD );
+-		outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
+-		
+-		queue_task(&priv->tlan_tqueue, &tq_immediate);
+-		mark_bh(IMMEDIATE_BH);
+-		
+-		netif_wake_queue(dev);
+-		ack = 0;
+-	} else {
+-		TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name );
+-		phy = priv->phy[priv->phyNum];
++void TLan_EeReceiveByte(u16 io_base, u8 * data, int stop)
++{
++	u8 place;
++	u16 sio;
+ 
+-		net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
+-		if ( net_sts ) {
+-			TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
+-			TLAN_DBG( TLAN_DEBUG_GNRL, "%s:    Net_Sts = %x\n", dev->name, (unsigned) net_sts );
+-		}
+-		if ( ( net_sts & TLAN_NET_STS_MIRQ ) &&  ( priv->phyNum == 0 ) ) {
+-			TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
+-			TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
+-        		if ( ! ( tlphy_sts & TLAN_TS_POLOK ) && ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+-                		tlphy_ctl |= TLAN_TC_SWAPOL;
+-                		TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
+-        		} else if ( ( tlphy_sts & TLAN_TS_POLOK ) && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+-                		tlphy_ctl &= ~TLAN_TC_SWAPOL;
+-                		TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
+-        		}
++	outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
++	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
++	*data = 0;
+ 
+-			if (debug) {
+-				TLan_PhyPrint( dev );		
+-			}
+-		}
++	/* Assume clock is low, tx is enabled; */
++	TLan_ClearBit(TLAN_NET_SIO_ETXEN, sio);
++	for (place = 0x80; place; place >>= 1) {
++		TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++		if (TLan_GetBit(TLAN_NET_SIO_EDATA, sio))
++			*data |= place;
++		TLan_ClearBit(TLAN_NET_SIO_ECLOK, sio);
++	}
++
++	TLan_SetBit(TLAN_NET_SIO_ETXEN, sio);
++	if (!stop) {
++		TLan_ClearBit(TLAN_NET_SIO_EDATA, sio);	/* Ack = 0 */
++		TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++		TLan_ClearBit(TLAN_NET_SIO_ECLOK, sio);
++	} else {
++		TLan_SetBit(TLAN_NET_SIO_EDATA, sio);	/* No ack = 1 (?) */
++		TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++		TLan_ClearBit(TLAN_NET_SIO_ECLOK, sio);
++		TLan_ClearBit(TLAN_NET_SIO_EDATA, sio);	/* STOP, raise data while clock is high */
++		TLan_SetBit(TLAN_NET_SIO_ECLOK, sio);
++		TLan_SetBit(TLAN_NET_SIO_EDATA, sio);
+ 	}
+ 
+-	return ack;
++}				/* TLan_EeReceiveByte */
++
+ 
+-} /* TLan_HandleStatusCheck */
+ 
+ 	/***************************************************************
+-	 *	TLan_HandleRxEOC
++	 *	TLan_EeReadByte
+ 	 *
+ 	 *	Returns:
+-	 *		1
++	 *		No error = 0, else, the stage at which the error
++	 *		occurred.
+ 	 *	Parms:
+-	 *		dev		Device assigned the IRQ that was
+-	 *				raised.
+-	 *		host_int	The contents of the HOST_INT
+-	 *				port.
+-	 *
+-	 *	This driver is structured to determine EOC occurances by
+-	 *	reading the CSTAT member of the list structure.  Rx EOC
+-	 *	interrupts are disabled via the DIO INTDIS register.
+-	 *	However, TLAN chips before revision 3.0 didn't have this
+-	 *	CSTAT member or a INTDIS register, so if this chip is
+-	 *	pre-3.0, process EOC interrupts normally.
++	 *		io_base		The IO port base address for the
++	 *				TLAN device with the EEPROM to
++	 *				use.
++	 *		ee_addr		The address of the byte in the
++	 *				EEPROM whose contents are to be
++	 *				retrieved.
++	 *		data		An address to a char to hold the
++	 *				data obtained from the EEPROM.
++	 *
++	 *	This function reads a byte of information from an byte
++	 *	cell in the EEPROM.
+ 	 *
+ 	 **************************************************************/
+ 
+-u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
++int TLan_EeReadByte(u16 io_base, u8 ee_addr, u8 * data)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	TLanList	*head_list;
+-	u32		ack = 1;
++	int err;
++	int ret = 0;
+ 
+-	if (  priv->tlanRev < 0x30 ) {
+-		TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOC (Head=%d Tail=%d) -- IRQ\n", priv->rxHead, priv->rxTail );
+-		head_list = priv->rxList + priv->rxHead;
+-		outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+-		ack |= TLAN_HC_GO | TLAN_HC_RT;
+-		priv->rxEocCount++;
++
++	TLan_EeSendStart(io_base);
++	err = TLan_EeSendByte(io_base, 0xA0, TLAN_EEPROM_ACK);
++	if (err) {
++		ret = 1;
++		goto fail;
++	}
++	err = TLan_EeSendByte(io_base, ee_addr, TLAN_EEPROM_ACK);
++	if (err) {
++		ret = 2;
++		goto fail;
++	}
++	TLan_EeSendStart(io_base);
++	err = TLan_EeSendByte(io_base, 0xA1, TLAN_EEPROM_ACK);
++	if (err) {
++		ret = 3;
++		goto fail;
+ 	}
++	TLan_EeReceiveByte(io_base, data, TLAN_EEPROM_STOP);
++      fail:
+ 
+-	return ack;
++	return ret;
++
++}				/* TLan_EeReadByte */
+ 
+-} /* TLan_HandleRxEOC */
+ 
+ /*****************************************************************************
+ ******************************************************************************
+ 
+-	ThunderLAN Driver Timer Function
++	ThunderLAN Driver MII Routines
++
++	These routines are based on the information in Chap. 2 of the
++	"ThunderLAN Programmer's Guide", pp. 15-24.
+ 
+ ******************************************************************************
+ *****************************************************************************/
+ 
++
+ 	/***************************************************************
+-	 *	TLan_Timer
++	 *	TLan_MiiReadReg
+ 	 *
+ 	 *	Returns:
+-	 *		Nothing
++	 *		0	if ack received ok
++	 *		1	otherwise.
++	 *
+ 	 *	Parms:
+-	 *		data	A value given to add timer when
+-	 *			add_timer was called.
++	 *		dev		The device structure containing
++	 *				The io address and interrupt count
++	 *				for this device.
++	 *		phy		The address of the PHY to be queried.
++	 *		reg		The register whose contents are to be
++	 *				retreived.
++	 *		val		A pointer to a variable to store the
++	 *				retrieved value.
+ 	 *
+-	 *	This function handles timed functionality for the
+-	 *	TLAN driver.  The two current timer uses are for
+-	 *	delaying for autonegotionation and driving the ACT LED.
+-	 *	-	Autonegotiation requires being allowed about
+-	 *		2 1/2 seconds before attempting to transmit a
+-	 *		packet.  It would be a very bad thing to hang
+-	 *		the kernel this long, so the driver doesn't
+-	 *		allow transmission 'til after this time, for
+-	 *		certain PHYs.  It would be much nicer if all
+-	 *		PHYs were interrupt-capable like the internal
+-	 *		PHY.
+-	 *	-	The ACT LED, which shows adapter activity, is
+-	 *		driven by the driver, and so must be left on
+-	 *		for a short period to power up the LED so it
+-	 *		can be seen.  This delay can be changed by
+-	 *		changing the TLAN_TIMER_ACT_DELAY in tlan.h,
+-	 *		if desired.  100 ms  produces a slightly
+-	 *		sluggish response.
++	 *	This function uses the TLAN's MII bus to retreive the contents
++	 *	of a given register on a PHY.  It sends the appropriate info
++	 *	and then reads the 16-bit register value from the MII bus via
++	 *	the TLAN SIO register.
+ 	 *
+ 	 **************************************************************/
+ 
+-void TLan_Timer( unsigned long data )
++int TLan_MiiReadReg(struct nic *nic __unused, u16 phy, u16 reg, u16 * val)
+ {
+-	struct net_device	*dev = (struct net_device *) data;
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u32		elapsed;
+-	unsigned long	flags = 0;
+-
+-	priv->timer.function = NULL;
+-
+-	switch ( priv->timerType ) {
+-#ifdef MONITOR		
+-		case TLAN_TIMER_LINK_BEAT:
+-			TLan_PhyMonitor( dev );
+-			break;
+-#endif
+-		case TLAN_TIMER_PHY_PDOWN:
+-			TLan_PhyPowerDown( dev );
+-			break;
+-		case TLAN_TIMER_PHY_PUP:
+-			TLan_PhyPowerUp( dev );
+-			break;
+-		case TLAN_TIMER_PHY_RESET:
+-			TLan_PhyReset( dev );
+-			break;
+-		case TLAN_TIMER_PHY_START_LINK:
+-			TLan_PhyStartLink( dev );
+-			break;
+-		case TLAN_TIMER_PHY_FINISH_AN:
+-			TLan_PhyFinishAutoNeg( dev );
+-			break;
+-		case TLAN_TIMER_FINISH_RESET:
+-			TLan_FinishReset( dev );
+-			break;
+-		case TLAN_TIMER_ACTIVITY:
+-			spin_lock_irqsave(&priv->lock, flags);
+-			if ( priv->timer.function == NULL ) {
+-				elapsed = jiffies - priv->timerSetAt;
+-				if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
+-					TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+-				} else  {
+-					priv->timer.function = &TLan_Timer;
+-					priv->timer.expires = priv->timerSetAt + TLAN_TIMER_ACT_DELAY;
+-					spin_unlock_irqrestore(&priv->lock, flags);
+-					add_timer( &priv->timer );
+-					break;
+-				}
+-			}
+-			spin_unlock_irqrestore(&priv->lock, flags);
+-			break;
+-		default:
+-			break;
++	u8 nack;
++	u16 sio, tmp;
++	u32 i;
++	int err;
++	int minten;
++
++	err = FALSE;
++	outw(TLAN_NET_SIO, BASE + TLAN_DIO_ADR);
++	sio = BASE + TLAN_DIO_DATA + TLAN_NET_SIO;
++
++	TLan_MiiSync(BASE);
++
++	minten = TLan_GetBit(TLAN_NET_SIO_MINTEN, sio);
++	if (minten)
++		TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
++
++	TLan_MiiSendData(BASE, 0x1, 2);	/* Start ( 01b ) */
++	TLan_MiiSendData(BASE, 0x2, 2);	/* Read  ( 10b ) */
++	TLan_MiiSendData(BASE, phy, 5);	/* Device #      */
++	TLan_MiiSendData(BASE, reg, 5);	/* Register #    */
++
++
++	TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio);	/* Change direction */
++
++	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);	/* Clock Idle bit */
++	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
++	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);	/* Wait 300ns */
++
++	nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio);	/* Check for ACK */
++	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);	/* Finish ACK */
++	if (nack) {		/* No ACK, so fake it */
++		for (i = 0; i < 16; i++) {
++			TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
++			TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
++		}
++		tmp = 0xffff;
++		err = TRUE;
++	} else {		/* ACK, so read data */
++		for (tmp = 0, i = 0x8000; i; i >>= 1) {
++			TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
++			if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
++				tmp |= i;
++			TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
++		}
+ 	}
+ 
+-} /* TLan_Timer */
+ 
+-/*****************************************************************************
+-******************************************************************************
++	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);	/* Idle cycle */
++	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ 
+-	ThunderLAN Driver Adapter Related Routines
++	if (minten)
++		TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
+ 
+-******************************************************************************
+-*****************************************************************************/
++	*val = tmp;
++
++	return err;
++
++}				/* TLan_MiiReadReg */
+ 
+ 	/***************************************************************
+-	 *	TLan_ResetLists
+-	 *  
++	 *	TLan_MiiSendData
++	 *
+ 	 *	Returns:
+ 	 *		Nothing
+ 	 *	Parms:
+-	 *		dev	The device structure with the list
+-	 *			stuctures to be reset.
++	 *		base_port	The base IO port of the adapter	in
++	 *				question.
++	 *		dev		The address of the PHY to be queried.
++	 *		data		The value to be placed on the MII bus.
++	 *		num_bits	The number of bits in data that are to
++	 *				be placed on the MII bus.
+ 	 *
+-	 *	This routine sets the variables associated with managing
+-	 *	the TLAN lists to their initial values.
++	 *	This function sends on sequence of bits on the MII
++	 *	configuration bus.
+ 	 *
+ 	 **************************************************************/
+ 
+-void TLan_ResetLists( struct net_device *dev )
++void TLan_MiiSendData(u16 base_port, u32 data, unsigned num_bits)
+ {
+-	TLanPrivateInfo *priv = dev->priv;
+-	int		i;
+-	TLanList	*list;
+-	struct sk_buff	*skb;
+-	void		*t = NULL;
++	u16 sio;
++	u32 i;
+ 
+-	priv->txHead = 0;
+-	priv->txTail = 0;
+-	for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
+-		list = priv->txList + i;
+-		list->cStat = TLAN_CSTAT_UNUSED;
+-		if ( bbuf ) {
+-			list->buffer[0].address = virt_to_bus( priv->txBuffer + ( i * TLAN_MAX_FRAME_SIZE ) );
+-		} else {
+-			list->buffer[0].address = 0;
+-		}
+-		list->buffer[2].count = 0;
+-		list->buffer[2].address = 0;
+-		list->buffer[9].address = 0;
+-	}
++	if (num_bits == 0)
++		return;
++
++	outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
++	sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
++	TLan_SetBit(TLAN_NET_SIO_MTXEN, sio);
+ 
+-	priv->rxHead = 0;
+-	priv->rxTail = TLAN_NUM_RX_LISTS - 1;
+-	for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
+-		list = priv->rxList + i;
+-		list->cStat = TLAN_CSTAT_READY;
+-		list->frameSize = TLAN_MAX_FRAME_SIZE;
+-		list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
+-		if ( bbuf ) {
+-			list->buffer[0].address = virt_to_bus( priv->rxBuffer + ( i * TLAN_MAX_FRAME_SIZE ) );
+-		} else {
+-			skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
+-			if ( skb == NULL ) {
+-				printk( "TLAN:  Couldn't allocate memory for received data.\n" );
+-				/* If this ever happened it would be a problem */
+-			} else {
+-				skb->dev = dev;
+-				skb_reserve( skb, 2 );
+-				t = (void *) skb_put( skb, TLAN_MAX_FRAME_SIZE );
+-			}
+-			list->buffer[0].address = virt_to_bus( t );
+-			list->buffer[8].address = (u32) t;
+-			list->buffer[9].address = (u32) skb;
+-		}
+-		list->buffer[1].count = 0;
+-		list->buffer[1].address = 0;
+-		if ( i < TLAN_NUM_RX_LISTS - 1 )
+-			list->forward = virt_to_bus( list + 1 );
++	for (i = (0x1 << (num_bits - 1)); i; i >>= 1) {
++		TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
++		(void) TLan_GetBit(TLAN_NET_SIO_MCLK, sio);
++		if (data & i)
++			TLan_SetBit(TLAN_NET_SIO_MDATA, sio);
+ 		else
+-			list->forward = 0;
++			TLan_ClearBit(TLAN_NET_SIO_MDATA, sio);
++		TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
++		(void) TLan_GetBit(TLAN_NET_SIO_MCLK, sio);
+ 	}
+ 
+-} /* TLan_ResetLists */
++}				/* TLan_MiiSendData */
+ 
+-void TLan_FreeLists( struct net_device *dev )
+-{
+-	TLanPrivateInfo *priv = dev->priv;
+-	int		i;
+-	TLanList	*list;
+-	struct sk_buff	*skb;
+-
+-	if ( ! bbuf ) {
+-		for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
+-			list = priv->txList + i;
+-			skb = (struct sk_buff *) list->buffer[9].address;
+-			if ( skb ) {
+-				dev_kfree_skb_any( skb );
+-				list->buffer[9].address = 0;
+-			}
+-		}
+ 
+-		for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
+-			list = priv->rxList + i;
+-			skb = (struct sk_buff *) list->buffer[9].address;
+-			if ( skb ) {
+-				dev_kfree_skb_any( skb );
+-				list->buffer[9].address = 0;
+-			}
+-		}
+-	}
+ 
+-} /* TLan_FreeLists */
+ 
+ 	/***************************************************************
+-	 *	TLan_PrintDio
+-	 *  
++	 *	TLan_MiiSync
++	 *
+ 	 *	Returns:
+ 	 *		Nothing
+ 	 *	Parms:
+-	 *		io_base		Base IO port of the device of
+-	 *				which to print DIO registers.
++	 *		base_port	The base IO port of the adapter in
++	 *				question.
+ 	 *
+-	 *	This function prints out all the internal (DIO)
+-	 *	registers of a TLAN chip.
++	 *	This functions syncs all PHYs in terms of the MII configuration
++	 *	bus.
+ 	 *
+ 	 **************************************************************/
+ 
+-void TLan_PrintDio( u16 io_base )
++void TLan_MiiSync(u16 base_port)
+ {
+-	u32 data0, data1;
+-	int	i;
++	int i;
++	u16 sio;
+ 
+-	printk( "TLAN:   Contents of internal registers for io base 0x%04hx.\n", io_base );
+-	printk( "TLAN:      Off.  +0         +4\n" );
+-	for ( i = 0; i < 0x4C; i+= 8 ) {
+-		data0 = TLan_DioRead32( io_base, i );
+-		data1 = TLan_DioRead32( io_base, i + 0x4 );
+-		printk( "TLAN:      0x%02x  0x%08x 0x%08x\n", i, data0, data1 );
++	outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
++	sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
++
++	TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio);
++	for (i = 0; i < 32; i++) {
++		TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
++		TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ 	}
+ 
+-} /* TLan_PrintDio */
++}				/* TLan_MiiSync */
++
++
++
+ 
+ 	/***************************************************************
+-	 *	TLan_PrintList
+-	 *  
++	 *	TLan_MiiWriteReg
++	 *
+ 	 *	Returns:
+ 	 *		Nothing
+ 	 *	Parms:
+-	 *		list	A pointer to the TLanList structure to
+-	 *			be printed.
+-	 *		type	A string to designate type of list,
+-	 *			"Rx" or "Tx".
+-	 *		num	The index of the list.
++	 *		dev		The device structure for the device
++	 *				to write to.
++	 *		phy		The address of the PHY to be written to.
++	 *		reg		The register whose contents are to be
++	 *				written.
++	 *		val		The value to be written to the register.
+ 	 *
+-	 *	This function prints out the contents of the list
+-	 *	pointed to by the list parameter.
++	 *	This function uses the TLAN's MII bus to write the contents of a
++	 *	given register on a PHY.  It sends the appropriate info and then
++	 *	writes the 16-bit register value from the MII configuration bus
++	 *	via the TLAN SIO register.
+ 	 *
+ 	 **************************************************************/
+ 
+-void TLan_PrintList( TLanList *list, char *type, int num)
++void TLan_MiiWriteReg(struct nic *nic __unused, u16 phy, u16 reg, u16 val)
+ {
+-	int i;
++	u16 sio;
++	int minten;
++
++	outw(TLAN_NET_SIO, BASE + TLAN_DIO_ADR);
++	sio = BASE + TLAN_DIO_DATA + TLAN_NET_SIO;
++
++	TLan_MiiSync(BASE);
++
++	minten = TLan_GetBit(TLAN_NET_SIO_MINTEN, sio);
++	if (minten)
++		TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
++
++	TLan_MiiSendData(BASE, 0x1, 2);	/* Start ( 01b ) */
++	TLan_MiiSendData(BASE, 0x1, 2);	/* Write ( 01b ) */
++	TLan_MiiSendData(BASE, phy, 5);	/* Device #      */
++	TLan_MiiSendData(BASE, reg, 5);	/* Register #    */
++
++	TLan_MiiSendData(BASE, 0x2, 2);	/* Send ACK */
++	TLan_MiiSendData(BASE, val, 16);	/* Send Data */
++
++	TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);	/* Idle cycle */
++	TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
++
++	if (minten)
++		TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
+ 
+-	printk( "TLAN:   %s List %d at 0x%08x\n", type, num, (u32) list );
+-	printk( "TLAN:      Forward    = 0x%08x\n",  list->forward );
+-	printk( "TLAN:      CSTAT      = 0x%04hx\n", list->cStat );
+-	printk( "TLAN:      Frame Size = 0x%04hx\n", list->frameSize );
+-	/* for ( i = 0; i < 10; i++ ) { */
+-	for ( i = 0; i < 2; i++ ) {
+-		printk( "TLAN:      Buffer[%d].count, addr = 0x%08x, 0x%08x\n", i, list->buffer[i].count, list->buffer[i].address );
+-	}
+ 
+-} /* TLan_PrintList */
++}				/* TLan_MiiWriteReg */
+ 
+ 	/***************************************************************
+-	 *	TLan_ReadAndClearStats
++	 *	TLan_SetMac
+ 	 *
+ 	 *	Returns:
+ 	 *		Nothing
+ 	 *	Parms:
+ 	 *		dev	Pointer to device structure of adapter
+-	 *			to which to read stats.
+-	 *		record	Flag indicating whether to add 
++	 *			on which to change the AREG.
++	 *		areg	The AREG to set the address in (0 - 3).
++	 *		mac	A pointer to an array of chars.  Each
++	 *			element stores one byte of the address.
++	 *			IE, it isn't in ascii.
+ 	 *
+-	 *	This functions reads all the internal status registers
+-	 *	of the TLAN chip, which clears them as a side effect.
+-	 *	It then either adds the values to the device's status
+-	 *	struct, or discards them, depending on whether record
+-	 *	is TLAN_RECORD (!=0)  or TLAN_IGNORE (==0).
++	 *	This function transfers a MAC address to one of the
++	 *	TLAN AREGs (address registers).  The TLAN chip locks
++	 *	the register on writing to offset 0 and unlocks the
++	 *	register after writing to offset 5.  If NULL is passed
++	 *	in mac, then the AREG is filled with 0's.
+ 	 *
+ 	 **************************************************************/
+ 
+-void TLan_ReadAndClearStats( struct net_device *dev, int record )
++void TLan_SetMac(struct nic *nic __unused, int areg, char *mac)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u32		tx_good, tx_under;
+-	u32		rx_good, rx_over;
+-	u32		def_tx, crc, code;
+-	u32		multi_col, single_col;
+-	u32		excess_col, late_col, loss;
+-
+-	outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
+-	tx_good  = inb( dev->base_addr + TLAN_DIO_DATA );
+-	tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+-	tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
+-	tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+-
+-	outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
+-	rx_good  = inb( dev->base_addr + TLAN_DIO_DATA );
+-	rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+-	rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
+-	rx_over  = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+-		
+-	outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
+-	def_tx  = inb( dev->base_addr + TLAN_DIO_DATA );
+-	def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+-	crc     = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+-	code    = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+-	
+-	outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
+-	multi_col   = inb( dev->base_addr + TLAN_DIO_DATA );
+-	multi_col  += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+-	single_col  = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+-	single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
+-
+-	outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
+-	excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
+-	late_col   = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
+-	loss       = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+-
+-	if ( record ) {
+-		priv->stats.rx_packets += rx_good;
+-		priv->stats.rx_errors  += rx_over + crc + code;
+-		priv->stats.tx_packets += tx_good;
+-		priv->stats.tx_errors  += tx_under + loss;
+-		priv->stats.collisions += multi_col + single_col + excess_col + late_col;
+-
+-		priv->stats.rx_over_errors    += rx_over;
+-		priv->stats.rx_crc_errors     += crc;
+-		priv->stats.rx_frame_errors   += code;
++	int i;
+ 
+-		priv->stats.tx_aborted_errors += tx_under;
+-		priv->stats.tx_carrier_errors += loss;
++	areg *= 6;
++
++	if (mac != NULL) {
++		for (i = 0; i < 6; i++)
++			TLan_DioWrite8(BASE, TLAN_AREG_0 + areg + i,
++				       mac[i]);
++	} else {
++		for (i = 0; i < 6; i++)
++			TLan_DioWrite8(BASE, TLAN_AREG_0 + areg + i, 0);
+ 	}
+-			
+-} /* TLan_ReadAndClearStats */
+ 
+-	/***************************************************************
+-	 *	TLan_Reset
++}				/* TLan_SetMac */
++
++	/*********************************************************************
++	 *	TLan_PhyDetect
+ 	 *
+ 	 *	Returns:
+-	 *		0
++	 *		Nothing
+ 	 *	Parms:
+-	 *		dev	Pointer to device structure of adapter
+-	 *			to be reset.
++	 *		dev	A pointer to the device structure of the adapter
++	 *			for which the PHY needs determined.
+ 	 *
+-	 *	This function resets the adapter and it's physical
+-	 *	device.  See Chap. 3, pp. 9-10 of the "ThunderLAN
+-	 *	Programmer's Guide" for details.  The routine tries to
+-	 *	implement what is detailed there, though adjustments
+-	 *	have been made.
++	 *	So far I've found that adapters which have external PHYs
++	 *	may also use the internal PHY for part of the functionality.
++	 *	(eg, AUI/Thinnet).  This function finds out if this TLAN
++	 *	chip has an internal PHY, and then finds the first external
++	 *	PHY (starting from address 0) if it exists).
+ 	 *
+-	 **************************************************************/
++	 ********************************************************************/
+ 
+-void
+-TLan_ResetAdapter( struct net_device *dev )
++void TLan_PhyDetect(struct nic *nic)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	int		i;
+-	u32		addr;
+-	u32		data;
+-	u8		data8;
++	u16 control;
++	u16 hi;
++	u16 lo;
++	u32 phy;
+ 
+-	priv->tlanFullDuplex = FALSE;
+-	priv->phyOnline=0;
+-/*  1.	Assert reset bit. */
++	if (tlan_pci_tbl[chip_idx].flags & TLAN_ADAPTER_UNMANAGED_PHY) {
++		priv->phyNum = 0xFFFF;
++		return;
++	}
+ 
+-	data = inl(dev->base_addr + TLAN_HOST_CMD);
+-	data |= TLAN_HC_AD_RST;
+-	outl(data, dev->base_addr + TLAN_HOST_CMD);
+-	
+-	udelay(1000);
++	TLan_MiiReadReg(nic, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi);
+ 
+-/*  2.	Turn off interrupts. ( Probably isn't necessary ) */
++	if (hi != 0xFFFF) {
++		priv->phy[0] = TLAN_PHY_MAX_ADDR;
++	} else {
++		priv->phy[0] = TLAN_PHY_NONE;
++	}
+ 
+-	data = inl(dev->base_addr + TLAN_HOST_CMD);
+-	data |= TLAN_HC_INT_OFF;
+-	outl(data, dev->base_addr + TLAN_HOST_CMD);
++	priv->phy[1] = TLAN_PHY_NONE;
++	for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) {
++		TLan_MiiReadReg(nic, phy, MII_GEN_CTL, &control);
++		TLan_MiiReadReg(nic, phy, MII_GEN_ID_HI, &hi);
++		TLan_MiiReadReg(nic, phy, MII_GEN_ID_LO, &lo);
++		if ((control != 0xFFFF) || (hi != 0xFFFF)
++		    || (lo != 0xFFFF)) {
++			printf("PHY found at %hX %hX %hX %hX\n", phy,
++			       control, hi, lo);
++			if ((priv->phy[1] == TLAN_PHY_NONE)
++			    && (phy != TLAN_PHY_MAX_ADDR)) {
++				priv->phy[1] = phy;
++			}
++		}
++	}
+ 
+-/*  3.	Clear AREGs and HASHs. */
++	if (priv->phy[1] != TLAN_PHY_NONE) {
++		priv->phyNum = 1;
++	} else if (priv->phy[0] != TLAN_PHY_NONE) {
++		priv->phyNum = 0;
++	} else {
++		printf
++		    ("TLAN:  Cannot initialize device, no PHY was found!\n");
++	}
++
++}				/* TLan_PhyDetect */
+ 
+- 	for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
+-		TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
++void TLan_PhyPowerDown(struct nic *nic)
++{
++
++	u16 value;
++	printf("%s: Powering down PHY(s).\n", priv->nic_name);
++	value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
++	TLan_MiiSync(BASE);
++	TLan_MiiWriteReg(nic, priv->phy[priv->phyNum], MII_GEN_CTL, value);
++	if ((priv->phyNum == 0) && (priv->phy[1] != TLAN_PHY_NONE)
++	    &&
++	    (!(tlan_pci_tbl[chip_idx].
++	       flags & TLAN_ADAPTER_USE_INTERN_10))) {
++		TLan_MiiSync(BASE);
++		TLan_MiiWriteReg(nic, priv->phy[1], MII_GEN_CTL, value);
+ 	}
+ 
+-/*  4.	Setup NetConfig register. */
++	/* Wait for 50 ms and powerup
++	 * This is abitrary.  It is intended to make sure the
++	 * tranceiver settles.
++	 */
++	/* TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP ); */
++	mdelay(50);
++	TLan_PhyPowerUp(nic);
+ 
+-	data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+-	TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
++}				/* TLan_PhyPowerDown */
+ 
+-/*  5.	Load Ld_Tmr and Ld_Thr in HOST_CMD. */
+ 
+- 	outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD );
+- 	outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD );
++void TLan_PhyPowerUp(struct nic *nic)
++{
++	u16 value;
+ 
+-/*  6.	Unreset the MII by setting NMRST (in NetSio) to 1. */
++	printf("%s: Powering up PHY.\n", priv->nic_name);
++	TLan_MiiSync(BASE);
++	value = MII_GC_LOOPBK;
++	TLan_MiiWriteReg(nic, priv->phy[priv->phyNum], MII_GEN_CTL, value);
++	TLan_MiiSync(BASE);
++	/* Wait for 500 ms and reset the
++	 * tranceiver.  The TLAN docs say both 50 ms and
++	 * 500 ms, so do the longer, just in case.
++	 */
++	mdelay(500);
++	TLan_PhyReset(nic);
++	/* TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET ); */
+ 
+-	outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
+-	addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+-	TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
++}				/* TLan_PhyPowerUp */
+ 
+-/*  7.	Setup the remaining registers. */
++void TLan_PhyReset(struct nic *nic)
++{
++	u16 phy;
++	u16 value;
+ 
+-	if ( priv->tlanRev >= 0x30 ) {
+-		data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
+-		TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
++	phy = priv->phy[priv->phyNum];
++
++	printf("%s: Reseting PHY.\n", priv->nic_name);
++	TLan_MiiSync(BASE);
++	value = MII_GC_LOOPBK | MII_GC_RESET;
++	TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, value);
++	TLan_MiiReadReg(nic, phy, MII_GEN_CTL, &value);
++	while (value & MII_GC_RESET) {
++		TLan_MiiReadReg(nic, phy, MII_GEN_CTL, &value);
+ 	}
+-	TLan_PhyDetect( dev );
+-	data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
+-	
+-	if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) {
+-		data |= TLAN_NET_CFG_BIT;
+-		if ( priv->aui == 1 ) {
+-			TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
+-		} else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
+-			TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
++
++	/* Wait for 500 ms and initialize.
++	 * I don't remember why I wait this long.
++	 * I've changed this to 50ms, as it seems long enough.
++	 */
++	/* TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK ); */
++	mdelay(50);
++	TLan_PhyStartLink(nic);
++
++}				/* TLan_PhyReset */
++
++
++void TLan_PhyStartLink(struct nic *nic)
++{
++
++	u16 ability;
++	u16 control;
++	u16 data;
++	u16 phy;
++	u16 status;
++	u16 tctl;
++
++	phy = priv->phy[priv->phyNum];
++	printf("%s: Trying to activate link.\n", priv->nic_name);
++	TLan_MiiReadReg(nic, phy, MII_GEN_STS, &status);
++	TLan_MiiReadReg(nic, phy, MII_GEN_STS, &ability);
++
++	if ((status & MII_GS_AUTONEG) && (!priv->aui)) {
++		ability = status >> 11;
++		if (priv->speed == TLAN_SPEED_10 &&
++		    priv->duplex == TLAN_DUPLEX_HALF) {
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, 0x0000);
++		} else if (priv->speed == TLAN_SPEED_10 &&
++			   priv->duplex == TLAN_DUPLEX_FULL) {
++			priv->tlanFullDuplex = TRUE;
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, 0x0100);
++		} else if (priv->speed == TLAN_SPEED_100 &&
++			   priv->duplex == TLAN_DUPLEX_HALF) {
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, 0x2000);
++		} else if (priv->speed == TLAN_SPEED_100 &&
++			   priv->duplex == TLAN_DUPLEX_FULL) {
+ 			priv->tlanFullDuplex = TRUE;
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, 0x2100);
+ 		} else {
+-			TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
++
++			/* Set Auto-Neg advertisement */
++			TLan_MiiWriteReg(nic, phy, MII_AN_ADV,
++					 (ability << 5) | 1);
++			/* Enablee Auto-Neg */
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, 0x1000);
++			/* Restart Auto-Neg */
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, 0x1200);
++			/* Wait for 4 sec for autonegotiation
++			 * to complete.  The max spec time is less than this
++			 * but the card need additional time to start AN.
++			 * .5 sec should be plenty extra.
++			 */
++			printf("TLAN: %s: Starting autonegotiation.\n",
++			       priv->nic_name);
++			mdelay(4000);
++			TLan_PhyFinishAutoNeg(nic);
++			/* TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN ); */
++			return;
+ 		}
+-	}
+ 
+-	if ( priv->phyNum == 0 ) {
+-		data |= TLAN_NET_CFG_PHY_EN;
+ 	}
+-	TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
+ 
+-	if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
+-		TLan_FinishReset( dev );
+-	} else {
+-		TLan_PhyPowerDown( dev );
++	if ((priv->aui) && (priv->phyNum != 0)) {
++		priv->phyNum = 0;
++		data =
++		    TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN |
++		    TLAN_NET_CFG_PHY_EN;
++		TLan_DioWrite16(BASE, TLAN_NET_CONFIG, data);
++		mdelay(50);
++		/* TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN ); */
++		TLan_PhyPowerDown(nic);
++		return;
++	} else if (priv->phyNum == 0) {
++		control = 0;
++		TLan_MiiReadReg(nic, phy, TLAN_TLPHY_CTL, &tctl);
++		if (priv->aui) {
++			tctl |= TLAN_TC_AUISEL;
++		} else {
++			tctl &= ~TLAN_TC_AUISEL;
++			if (priv->duplex == TLAN_DUPLEX_FULL) {
++				control |= MII_GC_DUPLEX;
++				priv->tlanFullDuplex = TRUE;
++			}
++			if (priv->speed == TLAN_SPEED_100) {
++				control |= MII_GC_SPEEDSEL;
++			}
++		}
++		TLan_MiiWriteReg(nic, phy, MII_GEN_CTL, control);
++		TLan_MiiWriteReg(nic, phy, TLAN_TLPHY_CTL, tctl);
+ 	}
+ 
+-} /* TLan_ResetAdapter */
++	/* Wait for 2 sec to give the tranceiver time
++	 * to establish link.
++	 */
++	/* TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET ); */
++	mdelay(2000);
++	TLan_FinishReset(nic);
++
++}				/* TLan_PhyStartLink */
+ 
+-void
+-TLan_FinishReset( struct net_device *dev )
++void TLan_PhyFinishAutoNeg(struct nic *nic)
+ {
+-	TLanPrivateInfo	*priv = dev->priv;
+-	u8		data;
+-	u32		phy;
+-	u8		sio;
+-	u16		status;
+-	u16		partner;
+-	u16		tlphy_ctl;
+-	u16 		tlphy_par;
+-	u16		tlphy_id1, tlphy_id2;
+-	int 		i;
++
++	u16 an_adv;
++	u16 an_lpa;
++	u16 data;
++	u16 mode;
++	u16 phy;
++	u16 status;
+ 
+ 	phy = priv->phy[priv->phyNum];
+ 
+-	data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
+-	if ( priv->tlanFullDuplex ) {
+-		data |= TLAN_NET_CMD_DUPLEX;
++	TLan_MiiReadReg(nic, phy, MII_GEN_STS, &status);
++	udelay(1000);
++	TLan_MiiReadReg(nic, phy, MII_GEN_STS, &status);
++
++	if (!(status & MII_GS_AUTOCMPLT)) {
++		/* Wait for 8 sec to give the process
++		 * more time.  Perhaps we should fail after a while.
++		 */
++		if (!priv->neg_be_verbose++) {
++			printf
++			    ("TLAN:  Giving autonegotiation more time.\n");
++			printf
++			    ("TLAN:  Please check that your adapter has\n");
++			printf
++			    ("TLAN:  been properly connected to a HUB or Switch.\n");
++			printf
++			    ("TLAN:  Trying to establish link in the background...\n");
++		}
++		mdelay(8000);
++		TLan_PhyFinishAutoNeg(nic);
++		/* TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN ); */
++		return;
+ 	}
+-	TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data );
+-	data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5; 
+-	if ( priv->phyNum == 0 ) {
+-		data |= TLAN_NET_MASK_MASK7; 
+-	}
+-	TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data );
+-	TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 );
+-	TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
+-	TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
+-	
+-	if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) || ( priv->aui ) ) {
+-		status = MII_GS_LINK;
+-		printk( "TLAN:  %s: Link forced.\n", dev->name );
+-	} else {
+-		TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+-		udelay( 1000 );
+-		TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
+-		if ( (status & MII_GS_LINK) &&	 /* We only support link info on Nat.Sem. PHY's */ 
+-			(tlphy_id1 == NAT_SEM_ID1) &&
+-			(tlphy_id2 == NAT_SEM_ID2) ) {
+-			TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
+-			TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
+-			
+-			printk( "TLAN: %s: Link active with ", dev->name );
+-			if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
+-			      	 printk( "forced 10%sMbps %s-Duplex\n", 
+-						tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
+-						tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
+-			} else {
+-				printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
+-						tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
+-						tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
+-				printk("TLAN: Partner capability: ");
+-					for (i = 5; i <= 10; i++)
+-						if (partner & (1<<i))
+-							printk("%s", media[i-5]);
+-							printk("\n");
+-			}
+ 
+-			TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+-#ifdef MONITOR			
+-			/* We have link beat..for now anyway */
+-	        	priv->link = 1;
+-	        	/*Enabling link beat monitoring */
+-			TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
+-#endif 
+-		} else if (status & MII_GS_LINK)  {
+-			printk( "TLAN: %s: Link active\n", dev->name );
+-			TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+-		}
++	printf("TLAN: %s: Autonegotiation complete.\n", priv->nic_name);
++	TLan_MiiReadReg(nic, phy, MII_AN_ADV, &an_adv);
++	TLan_MiiReadReg(nic, phy, MII_AN_LPA, &an_lpa);
++	mode = an_adv & an_lpa & 0x03E0;
++	if (mode & 0x0100) {
++		printf("Full Duplex\n");
++		priv->tlanFullDuplex = TRUE;
++	} else if (!(mode & 0x0080) && (mode & 0x0040)) {
++		priv->tlanFullDuplex = TRUE;
++		printf("Full Duplex\n");
+ 	}
+ 
+-	if ( priv->phyNum == 0 ) {
+-        	TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
+-        	tlphy_ctl |= TLAN_TC_INTEN;
+-        	TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl );
+-        	sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
+-        	sio |= TLAN_NET_SIO_MINTEN;
+-        	TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
++	if ((!(mode & 0x0180))
++	    && (tlan_pci_tbl[chip_idx].flags & TLAN_ADAPTER_USE_INTERN_10)
++	    && (priv->phyNum != 0)) {
++		priv->phyNum = 0;
++		data =
++		    TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN |
++		    TLAN_NET_CFG_PHY_EN;
++		TLan_DioWrite16(BASE, TLAN_NET_CONFIG, data);
++		/* TLan_SetTimer( nic, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN ); */
++		mdelay(400);
++		TLan_PhyPowerDown(nic);
++		return;
+ 	}
+ 
+-	if ( status & MII_GS_LINK ) {
+-		TLan_SetMac( dev, 0, dev->dev_addr );
+-		priv->phyOnline = 1;
+-		outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
+-		if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
+-			outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
++	if (priv->phyNum == 0) {
++		if ((priv->duplex == TLAN_DUPLEX_FULL)
++		    || (an_adv & an_lpa & 0x0040)) {
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL,
++					 MII_GC_AUTOENB | MII_GC_DUPLEX);
++			printf
++			    ("TLAN:  Starting internal PHY with FULL-DUPLEX\n");
++		} else {
++			TLan_MiiWriteReg(nic, phy, MII_GEN_CTL,
++					 MII_GC_AUTOENB);
++			printf
++			    ("TLAN:  Starting internal PHY with HALF-DUPLEX\n");
+ 		}
+-		outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
+-		outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
+-	} else {
+-		printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n", dev->name );
+-		TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
+-		return;
+ 	}
+ 
+-} /* TLan_FinishReset */
++	/* Wait for 100 ms.  No reason in partiticular.
++	 */
++	/* TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET ); */
++	mdelay(100);
++	TLan_FinishReset(nic);
+ 
+-	/***************************************************************
+-	 *	TLan_SetMac
+-	 *
+-	 *	Returns:
+-	 *		Nothing
+-	 *	Parms:
+-	 *		dev	Pointer to device structure of adapter
+-	 *			on which to change the AREG.
+-	 *		areg	The AREG to set the address in (0 - 3).
+-	 *		mac	A pointer to an array of chars.  Each
+-	 *			element stores one byte of the address.
+-	 *			IE, it isn't in ascii.
+-	 *
+-	 *	This function transfers a MAC address to one of the
+-	 *	TLAN AREGs (address registers).  The TLAN chip locks
+-	 *	the register on writing to offset 0 and unlocks the
+-	 *	register after writing to offset 5.  If NULL is passed
+-	 *	in mac, then the AREG is filled with 0's.
+-	 *
+-	 **************************************************************/
++}				/* TLan_PhyFinishAutoNeg */
++
++#ifdef MONITOR
++
++	/*********************************************************************
++        *
++        *      TLan_phyMonitor
++        *
++        *      Returns:
++        *              None
++        *
++        *      Params:
++        *              dev             The device structure of this device.
++        *
++        *
++        *      This function monitors PHY condition by reading the status
++        *      register via the MII bus. This can be used to give info
++        *      about link changes (up/down), and possible switch to alternate
++        *      media.
++        *
++        * ******************************************************************/
+ 
+-void TLan_SetMac( struct net_device *dev, int areg, char *mac )
++void TLan_PhyMonitor(struct net_device *dev)
+ {
+-	int i;
+-			
+-	areg *= 6;
++	TLanPrivateInfo *priv = dev->priv;
++	u16 phy;
++	u16 phy_status;
+ 
+-	if ( mac != NULL ) {
+-		for ( i = 0; i < 6; i++ )
+-			TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, mac[i] );
+-	} else {
+-		for ( i = 0; i < 6; i++ )
+-			TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, 0 );
++	phy = priv->phy[priv->phyNum];
++
++	/* Get PHY status register */
++	TLan_MiiReadReg(nic, phy, MII_GEN_STS, &phy_status);
++
++	/* Check if link has been lost */
++	if (!(phy_status & MII_GS_LINK)) {
++		if (priv->link) {
++			priv->link = 0;
++			printf("TLAN: %s has lost link\n", priv->nic_name);
++			priv->flags &= ~IFF_RUNNING;
++			mdelay(2000);
++			TLan_PhyMonitor(nic);
++			/* TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); */
++			return;
++		}
+ 	}
+ 
+-} /* TLan_SetMac */
++	/* Link restablished? */
++	if ((phy_status & MII_GS_LINK) && !priv->link) {
++		priv->link = 1;
++		printf("TLAN: %s has reestablished link\n",
++		       priv->nic_name);
++		priv->flags |= IFF_RUNNING;
++	}
++
++	/* Setup a new monitor */
++	/* TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); */
++	mdelay(2000);
++	TLan_PhyMonitor(nic);
++}
+ 
++#endif				/* MONITOR */
++
++#ifdef EB51
++static struct pci_id tlan_nics[] = {
++	PCI_ROM(0x0e11, 0xae34, "netel10", "Compaq Netelligent 10 T PCI UTP"),
++	PCI_ROM(0x0e11, 0xae32, "netel100","Compaq Netelligent 10/100 TX PCI UTP"),
++	PCI_ROM(0x0e11, 0xae35, "netflex3i", "Compaq Integrated NetFlex-3/P"),
++	PCI_ROM(0x0e11, 0xf130, "thunder", "Compaq NetFlex-3/P"),
++	PCI_ROM(0x0e11, 0xf150, "netflex3b", "Compaq NetFlex-3/P"),
++	PCI_ROM(0x0e11, 0xae43, "netel100pi", "Compaq Netelligent Integrated 10/100 TX UTP"),
++	PCI_ROM(0x0e11, 0xae40, "netel100d", "Compaq Netelligent Dual 10/100 TX PCI UTP"),
++	PCI_ROM(0x0e11, 0xb011, "netel100i", "Compaq Netelligent 10/100 TX Embedded UTP"),
++	PCI_ROM(0x108d, 0x0013, "oc2183", "Olicom OC-2183/2185"),
++	PCI_ROM(0x108d, 0x0012, "oc2325", "Olicom OC-2325"),
++	PCI_ROM(0x108d, 0x0014, "oc2326", "Olicom OC-2326"),
++	PCI_ROM(0x0e11, 0xb030, "netelligent_10_100_ws_5100", "Compaq Netelligent 10/100 TX UTP"),
++	PCI_ROM(0x0e11, 0xb012, "netelligent_10_t2", "Compaq Netelligent 10 T/2 PCI UTP/Coax"),
++};
++
++struct pci_driver tlan_driver = {
++	.type = NIC_DRIVER,
++	.name = "TLAN/PCI",
++	.probe = tlan_probe,
++	.ids = tlan_nics,
++	.id_count = sizeof(tlan_nics) / sizeof(tlan_nics[0]),
++	.class = 0,
++};
+ #endif
+diff -Naur grub-0.97.orig/netboot/tlan.h grub-0.97/netboot/tlan.h
+--- grub-0.97.orig/netboot/tlan.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/tlan.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,536 @@
++/**************************************************************************
++*
++*    tlan.c -- Etherboot device driver for the Texas Instruments ThunderLAN
++*    Written 2003-2003 by Timothy Legge <tlegge@rogers.com>
++*
++*    This program is free software; you can redistribute it and/or modify
++*    it under the terms of the GNU General Public License as published by
++*    the Free Software Foundation; either version 2 of the License, or
++*    (at your option) any later version.
++*
++*    This program is distributed in the hope that it will be useful,
++*    but WITHOUT ANY WARRANTY; without even the implied warranty of
++*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++*    GNU General Public License for more details.
++*
++*    You should have received a copy of the GNU General Public License
++*    along with this program; if not, write to the Free Software
++*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*
++*    Portions of this code (almost all) based on:
++*               tlan.c: Linux ThunderLan Driver:
++*
++*				by James Banks
++*
++*  				(C) 1997-1998 Caldera, Inc.
++*			  	(C) 1998 James Banks
++*				(C) 1999-2001 Torben Mathiasen
++*				(C) 2002 Samuel Chessman
++*
++*    REVISION HISTORY:
++*    ================
++*    v1.0	07-08-2003	timlegge	Initial not quite working version
++*
++* Indent Style: indent -kr -i8
++***************************************************************************/
++
++/*
++#include <asm/io.h>
++#include <asm/types.h>
++#include <linux/netdevice.h>
++*/
++
++typedef unsigned char u8;
++typedef signed char s8;
++typedef unsigned short u16;
++typedef signed short s16;
++typedef unsigned int u32;
++typedef signed int s32;
++	/*****************************************************************
++	 * TLan Definitions
++	 *
++	 ****************************************************************/
++
++#define FALSE			0
++#define TRUE			1
++
++#define TLAN_MIN_FRAME_SIZE	64
++#define TLAN_MAX_FRAME_SIZE	1600
++
++#define TLAN_NUM_RX_LISTS	4
++#define TLAN_NUM_TX_LISTS	2
++
++#define TLAN_IGNORE		0
++#define TLAN_RECORD		1
++/*
++#define TLAN_DBG(lvl, format, args...)	if (debug&lvl) printf("TLAN: " format, ##args );
++*/
++#define TLAN_DEBUG_GNRL		0x0001
++#define TLAN_DEBUG_TX		0x0002
++#define TLAN_DEBUG_RX		0x0004
++#define TLAN_DEBUG_LIST		0x0008
++#define TLAN_DEBUG_PROBE	0x0010
++
++#define TX_TIMEOUT		(10*HZ)	/* We need time for auto-neg */
++#define MAX_TLAN_BOARDS		8	/* Max number of boards installed at a time */
++
++
++	/*****************************************************************
++	 * Device Identification Definitions
++	 *
++	 ****************************************************************/
++
++#define PCI_DEVICE_ID_NETELLIGENT_10_T2			0xB012
++#define PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100	0xB030
++#ifndef PCI_DEVICE_ID_OLICOM_OC2183
++#define PCI_DEVICE_ID_OLICOM_OC2183			0x0013
++#endif
++#ifndef PCI_DEVICE_ID_OLICOM_OC2325
++#define PCI_DEVICE_ID_OLICOM_OC2325			0x0012
++#endif
++#ifndef PCI_DEVICE_ID_OLICOM_OC2326
++#define PCI_DEVICE_ID_OLICOM_OC2326			0x0014
++#endif
++
++typedef struct tlan_adapter_entry {
++	u16 vendorId;
++	u16 deviceId;
++	char *deviceLabel;
++	u32 flags;
++	u16 addrOfs;
++} TLanAdapterEntry;
++
++#define TLAN_ADAPTER_NONE		0x00000000
++#define TLAN_ADAPTER_UNMANAGED_PHY	0x00000001
++#define TLAN_ADAPTER_BIT_RATE_PHY	0x00000002
++#define TLAN_ADAPTER_USE_INTERN_10	0x00000004
++#define TLAN_ADAPTER_ACTIVITY_LED	0x00000008
++
++#define TLAN_SPEED_DEFAULT	0
++#define TLAN_SPEED_10		10
++#define TLAN_SPEED_100		100
++
++#define TLAN_DUPLEX_DEFAULT	0
++#define TLAN_DUPLEX_HALF	1
++#define TLAN_DUPLEX_FULL	2
++
++
++
++	/*****************************************************************
++	 * EISA Definitions
++	 *
++	 ****************************************************************/
++
++#define EISA_ID      0xc80	/* EISA ID Registers */
++#define EISA_ID0     0xc80	/* EISA ID Register 0 */
++#define EISA_ID1     0xc81	/* EISA ID Register 1 */
++#define EISA_ID2     0xc82	/* EISA ID Register 2 */
++#define EISA_ID3     0xc83	/* EISA ID Register 3 */
++#define EISA_CR      0xc84	/* EISA Control Register */
++#define EISA_REG0    0xc88	/* EISA Configuration Register 0 */
++#define EISA_REG1    0xc89	/* EISA Configuration Register 1 */
++#define EISA_REG2    0xc8a	/* EISA Configuration Register 2 */
++#define EISA_REG3    0xc8f	/* EISA Configuration Register 3 */
++#define EISA_APROM   0xc90	/* Ethernet Address PROM */
++
++
++
++	/*****************************************************************
++	 * Rx/Tx List Definitions
++	 *
++	 ****************************************************************/
++
++#define TLAN_BUFFERS_PER_LIST	10
++#define TLAN_LAST_BUFFER	0x80000000
++#define TLAN_CSTAT_UNUSED	0x8000
++#define TLAN_CSTAT_FRM_CMP	0x4000
++#define TLAN_CSTAT_READY	0x3000
++#define TLAN_CSTAT_EOC		0x0800
++#define TLAN_CSTAT_RX_ERROR	0x0400
++#define TLAN_CSTAT_PASS_CRC	0x0200
++#define TLAN_CSTAT_DP_PR	0x0100
++
++
++
++
++
++
++	/*****************************************************************
++	 * PHY definitions
++	 *
++	 ****************************************************************/
++
++#define TLAN_PHY_MAX_ADDR	0x1F
++#define TLAN_PHY_NONE		0x20
++
++
++
++	/*****************************************************************
++	 * TLan Driver Timer Definitions
++	 *
++	 ****************************************************************/
++
++#define TLAN_TIMER_LINK_BEAT		1
++#define TLAN_TIMER_ACTIVITY		2
++#define TLAN_TIMER_PHY_PDOWN		3
++#define TLAN_TIMER_PHY_PUP		4
++#define TLAN_TIMER_PHY_RESET		5
++#define TLAN_TIMER_PHY_START_LINK	6
++#define TLAN_TIMER_PHY_FINISH_AN	7
++#define TLAN_TIMER_FINISH_RESET		8
++
++#define TLAN_TIMER_ACT_DELAY		(HZ/10)
++
++
++
++
++	/*****************************************************************
++	 * TLan Driver Eeprom Definitions
++	 *
++	 ****************************************************************/
++
++#define TLAN_EEPROM_ACK		0
++#define TLAN_EEPROM_STOP	1
++
++
++
++
++	/*****************************************************************
++	 * Host Register Offsets and Contents
++	 *
++	 ****************************************************************/
++
++#define TLAN_HOST_CMD			0x00
++#define 	TLAN_HC_GO		0x80000000
++#define		TLAN_HC_STOP		0x40000000
++#define		TLAN_HC_ACK		0x20000000
++#define		TLAN_HC_CS_MASK		0x1FE00000
++#define		TLAN_HC_EOC		0x00100000
++#define		TLAN_HC_RT		0x00080000
++#define		TLAN_HC_NES		0x00040000
++#define		TLAN_HC_AD_RST		0x00008000
++#define		TLAN_HC_LD_TMR		0x00004000
++#define		TLAN_HC_LD_THR		0x00002000
++#define		TLAN_HC_REQ_INT		0x00001000
++#define		TLAN_HC_INT_OFF		0x00000800
++#define		TLAN_HC_INT_ON		0x00000400
++#define		TLAN_HC_AC_MASK		0x000000FF
++#define TLAN_CH_PARM			0x04
++#define TLAN_DIO_ADR			0x08
++#define		TLAN_DA_ADR_INC		0x8000
++#define		TLAN_DA_RAM_ADR		0x4000
++#define TLAN_HOST_INT			0x0A
++#define		TLAN_HI_IV_MASK		0x1FE0
++#define		TLAN_HI_IT_MASK		0x001C
++#define TLAN_DIO_DATA			0x0C
++
++
++/* ThunderLAN Internal Register DIO Offsets */
++
++#define TLAN_NET_CMD			0x00
++#define		TLAN_NET_CMD_NRESET	0x80
++#define		TLAN_NET_CMD_NWRAP	0x40
++#define		TLAN_NET_CMD_CSF	0x20
++#define		TLAN_NET_CMD_CAF	0x10
++#define		TLAN_NET_CMD_NOBRX	0x08
++#define		TLAN_NET_CMD_DUPLEX	0x04
++#define		TLAN_NET_CMD_TRFRAM	0x02
++#define		TLAN_NET_CMD_TXPACE	0x01
++#define TLAN_NET_SIO			0x01
++#define 	TLAN_NET_SIO_MINTEN	0x80
++#define		TLAN_NET_SIO_ECLOK	0x40
++#define		TLAN_NET_SIO_ETXEN	0x20
++#define		TLAN_NET_SIO_EDATA	0x10
++#define		TLAN_NET_SIO_NMRST	0x08
++#define		TLAN_NET_SIO_MCLK	0x04
++#define		TLAN_NET_SIO_MTXEN	0x02
++#define		TLAN_NET_SIO_MDATA	0x01
++#define TLAN_NET_STS			0x02
++#define		TLAN_NET_STS_MIRQ	0x80
++#define		TLAN_NET_STS_HBEAT	0x40
++#define		TLAN_NET_STS_TXSTOP	0x20
++#define		TLAN_NET_STS_RXSTOP	0x10
++#define		TLAN_NET_STS_RSRVD	0x0F
++#define TLAN_NET_MASK			0x03
++#define		TLAN_NET_MASK_MASK7	0x80
++#define		TLAN_NET_MASK_MASK6	0x40
++#define		TLAN_NET_MASK_MASK5	0x20
++#define		TLAN_NET_MASK_MASK4	0x10
++#define		TLAN_NET_MASK_RSRVD	0x0F
++#define TLAN_NET_CONFIG			0x04
++#define 	TLAN_NET_CFG_RCLK	0x8000
++#define		TLAN_NET_CFG_TCLK	0x4000
++#define		TLAN_NET_CFG_BIT	0x2000
++#define		TLAN_NET_CFG_RXCRC	0x1000
++#define		TLAN_NET_CFG_PEF	0x0800
++#define		TLAN_NET_CFG_1FRAG	0x0400
++#define		TLAN_NET_CFG_1CHAN	0x0200
++#define		TLAN_NET_CFG_MTEST	0x0100
++#define		TLAN_NET_CFG_PHY_EN	0x0080
++#define		TLAN_NET_CFG_MSMASK	0x007F
++#define TLAN_MAN_TEST			0x06
++#define TLAN_DEF_VENDOR_ID		0x08
++#define TLAN_DEF_DEVICE_ID		0x0A
++#define TLAN_DEF_REVISION		0x0C
++#define TLAN_DEF_SUBCLASS		0x0D
++#define TLAN_DEF_MIN_LAT		0x0E
++#define TLAN_DEF_MAX_LAT		0x0F
++#define TLAN_AREG_0			0x10
++#define TLAN_AREG_1			0x16
++#define TLAN_AREG_2			0x1C
++#define TLAN_AREG_3			0x22
++#define TLAN_HASH_1			0x28
++#define TLAN_HASH_2			0x2C
++#define TLAN_GOOD_TX_FRMS		0x30
++#define TLAN_TX_UNDERUNS		0x33
++#define TLAN_GOOD_RX_FRMS		0x34
++#define TLAN_RX_OVERRUNS		0x37
++#define TLAN_DEFERRED_TX		0x38
++#define TLAN_CRC_ERRORS			0x3A
++#define TLAN_CODE_ERRORS		0x3B
++#define TLAN_MULTICOL_FRMS		0x3C
++#define TLAN_SINGLECOL_FRMS		0x3E
++#define TLAN_EXCESSCOL_FRMS		0x40
++#define TLAN_LATE_COLS			0x41
++#define TLAN_CARRIER_LOSS		0x42
++#define TLAN_ACOMMIT			0x43
++#define TLAN_LED_REG			0x44
++#define		TLAN_LED_ACT		0x10
++#define		TLAN_LED_LINK		0x01
++#define TLAN_BSIZE_REG			0x45
++#define TLAN_MAX_RX			0x46
++#define TLAN_INT_DIS			0x48
++#define		TLAN_ID_TX_EOC		0x04
++#define		TLAN_ID_RX_EOF		0x02
++#define		TLAN_ID_RX_EOC		0x01
++
++
++
++/* ThunderLAN Interrupt Codes */
++
++#define TLAN_INT_NUMBER_OF_INTS	8
++
++#define TLAN_INT_NONE			0x0000
++#define TLAN_INT_TX_EOF			0x0001
++#define TLAN_INT_STAT_OVERFLOW		0x0002
++#define TLAN_INT_RX_EOF			0x0003
++#define TLAN_INT_DUMMY			0x0004
++#define TLAN_INT_TX_EOC			0x0005
++#define TLAN_INT_STATUS_CHECK		0x0006
++#define TLAN_INT_RX_EOC			0x0007
++
++
++
++/* ThunderLAN MII Registers */
++
++/* Generic MII/PHY Registers */
++
++#define MII_GEN_CTL			0x00
++#define 	MII_GC_RESET		0x8000
++#define		MII_GC_LOOPBK		0x4000
++#define		MII_GC_SPEEDSEL		0x2000
++#define		MII_GC_AUTOENB		0x1000
++#define		MII_GC_PDOWN		0x0800
++#define		MII_GC_ISOLATE		0x0400
++#define		MII_GC_AUTORSRT		0x0200
++#define		MII_GC_DUPLEX		0x0100
++#define		MII_GC_COLTEST		0x0080
++#define		MII_GC_RESERVED		0x007F
++#define MII_GEN_STS			0x01
++#define		MII_GS_100BT4		0x8000
++#define		MII_GS_100BTXFD		0x4000
++#define		MII_GS_100BTXHD		0x2000
++#define		MII_GS_10BTFD		0x1000
++#define		MII_GS_10BTHD		0x0800
++#define		MII_GS_RESERVED		0x07C0
++#define		MII_GS_AUTOCMPLT	0x0020
++#define		MII_GS_RFLT		0x0010
++#define		MII_GS_AUTONEG		0x0008
++#define		MII_GS_LINK		0x0004
++#define		MII_GS_JABBER		0x0002
++#define		MII_GS_EXTCAP		0x0001
++#define MII_GEN_ID_HI			0x02
++#define MII_GEN_ID_LO			0x03
++#define 	MII_GIL_OUI		0xFC00
++#define 	MII_GIL_MODEL		0x03F0
++#define 	MII_GIL_REVISION	0x000F
++#define MII_AN_ADV			0x04
++#define MII_AN_LPA			0x05
++#define MII_AN_EXP			0x06
++
++/* ThunderLAN Specific MII/PHY Registers */
++
++#define TLAN_TLPHY_ID			0x10
++#define TLAN_TLPHY_CTL			0x11
++#define 	TLAN_TC_IGLINK		0x8000
++#define		TLAN_TC_SWAPOL		0x4000
++#define		TLAN_TC_AUISEL		0x2000
++#define		TLAN_TC_SQEEN		0x1000
++#define		TLAN_TC_MTEST		0x0800
++#define		TLAN_TC_RESERVED	0x07F8
++#define		TLAN_TC_NFEW		0x0004
++#define		TLAN_TC_INTEN		0x0002
++#define		TLAN_TC_TINT		0x0001
++#define TLAN_TLPHY_STS			0x12
++#define		TLAN_TS_MINT		0x8000
++#define		TLAN_TS_PHOK		0x4000
++#define		TLAN_TS_POLOK		0x2000
++#define		TLAN_TS_TPENERGY	0x1000
++#define		TLAN_TS_RESERVED	0x0FFF
++#define TLAN_TLPHY_PAR			0x19
++#define		TLAN_PHY_CIM_STAT	0x0020
++#define		TLAN_PHY_SPEED_100	0x0040
++#define		TLAN_PHY_DUPLEX_FULL	0x0080
++#define		TLAN_PHY_AN_EN_STAT     0x0400
++
++/* National Sem. & Level1 PHY id's */
++#define NAT_SEM_ID1			0x2000
++#define NAT_SEM_ID2			0x5C01
++#define LEVEL1_ID1			0x7810
++#define LEVEL1_ID2			0x0000
++
++#define CIRC_INC( a, b ) if ( ++a >= b ) a = 0
++
++/* Routines to access internal registers. */
++
++inline u8 TLan_DioRead8(u16 base_addr, u16 internal_addr)
++{
++	outw(internal_addr, base_addr + TLAN_DIO_ADR);
++	return (inb((base_addr + TLAN_DIO_DATA) + (internal_addr & 0x3)));
++
++}				/* TLan_DioRead8 */
++
++
++
++
++inline u16 TLan_DioRead16(u16 base_addr, u16 internal_addr)
++{
++	outw(internal_addr, base_addr + TLAN_DIO_ADR);
++	return (inw((base_addr + TLAN_DIO_DATA) + (internal_addr & 0x2)));
++
++}				/* TLan_DioRead16 */
++
++
++
++
++inline u32 TLan_DioRead32(u16 base_addr, u16 internal_addr)
++{
++	outw(internal_addr, base_addr + TLAN_DIO_ADR);
++	return (inl(base_addr + TLAN_DIO_DATA));
++
++}				/* TLan_DioRead32 */
++
++
++
++
++inline void TLan_DioWrite8(u16 base_addr, u16 internal_addr, u8 data)
++{
++	outw(internal_addr, base_addr + TLAN_DIO_ADR);
++	outb(data, base_addr + TLAN_DIO_DATA + (internal_addr & 0x3));
++
++}
++
++
++
++
++inline void TLan_DioWrite16(u16 base_addr, u16 internal_addr, u16 data)
++{
++	outw(internal_addr, base_addr + TLAN_DIO_ADR);
++	outw(data, base_addr + TLAN_DIO_DATA + (internal_addr & 0x2));
++
++}
++
++
++
++
++inline void TLan_DioWrite32(u16 base_addr, u16 internal_addr, u32 data)
++{
++	outw(internal_addr, base_addr + TLAN_DIO_ADR);
++	outl(data, base_addr + TLAN_DIO_DATA + (internal_addr & 0x2));
++
++}
++
++
++
++#if 0
++inline void TLan_ClearBit(u8 bit, u16 port)
++{
++	outb_p(inb_p(port) & ~bit, port);
++}
++
++
++
++
++inline int TLan_GetBit(u8 bit, u16 port)
++{
++	return ((int) (inb_p(port) & bit));
++}
++
++
++
++
++inline void TLan_SetBit(u8 bit, u16 port)
++{
++	outb_p(inb_p(port) | bit, port);
++}
++#endif
++
++#define TLan_ClearBit( bit, port )	outb_p(inb_p(port) & ~bit, port)
++#define TLan_GetBit( bit, port )	((int) (inb_p(port) & bit))
++#define TLan_SetBit( bit, port )	outb_p(inb_p(port) | bit, port)
++
++#ifdef I_LIKE_A_FAST_HASH_FUNCTION
++/* given 6 bytes, view them as 8 6-bit numbers and return the XOR of those */
++/* the code below is about seven times as fast as the original code */
++inline u32 TLan_HashFunc(u8 * a)
++{
++	u8 hash;
++
++	hash = (a[0] ^ a[3]);	/* & 077 */
++	hash ^= ((a[0] ^ a[3]) >> 6);	/* & 003 */
++	hash ^= ((a[1] ^ a[4]) << 2);	/* & 074 */
++	hash ^= ((a[1] ^ a[4]) >> 4);	/* & 017 */
++	hash ^= ((a[2] ^ a[5]) << 4);	/* & 060 */
++	hash ^= ((a[2] ^ a[5]) >> 2);	/* & 077 */
++
++	return (hash & 077);
++}
++
++#else				/* original code */
++
++inline u32 xor(u32 a, u32 b)
++{
++	return ((a && !b) || (!a && b));
++}
++
++#define XOR8( a, b, c, d, e, f, g, h )	xor( a, xor( b, xor( c, xor( d, xor( e, xor( f, xor( g, h ) ) ) ) ) ) )
++#define DA( a, bit )					( ( (u8) a[bit/8] ) & ( (u8) ( 1 << bit%8 ) ) )
++
++inline u32 TLan_HashFunc(u8 * a)
++{
++	u32 hash;
++
++	hash =
++	    XOR8(DA(a, 0), DA(a, 6), DA(a, 12), DA(a, 18), DA(a, 24),
++		 DA(a, 30), DA(a, 36), DA(a, 42));
++	hash |=
++	    XOR8(DA(a, 1), DA(a, 7), DA(a, 13), DA(a, 19), DA(a, 25),
++		 DA(a, 31), DA(a, 37), DA(a, 43)) << 1;
++	hash |=
++	    XOR8(DA(a, 2), DA(a, 8), DA(a, 14), DA(a, 20), DA(a, 26),
++		 DA(a, 32), DA(a, 38), DA(a, 44)) << 2;
++	hash |=
++	    XOR8(DA(a, 3), DA(a, 9), DA(a, 15), DA(a, 21), DA(a, 27),
++		 DA(a, 33), DA(a, 39), DA(a, 45)) << 3;
++	hash |=
++	    XOR8(DA(a, 4), DA(a, 10), DA(a, 16), DA(a, 22), DA(a, 28),
++		 DA(a, 34), DA(a, 40), DA(a, 46)) << 4;
++	hash |=
++	    XOR8(DA(a, 5), DA(a, 11), DA(a, 17), DA(a, 23), DA(a, 29),
++		 DA(a, 35), DA(a, 41), DA(a, 47)) << 5;
++
++	return hash;
++
++}
++
++#endif				/* I_LIKE_A_FAST_HASH_FUNCTION */
+diff -Naur grub-0.97.orig/netboot/tulip.c grub-0.97/netboot/tulip.c
+--- grub-0.97.orig/netboot/tulip.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/tulip.c	2005-08-31 19:03:35.000000000 +0000
+@@ -48,6 +48,7 @@
+ /*********************************************************************/
+ 
+ /*
++  07 Sep 2003  timlegge	Multicast Support Added
+   11 Apr 2001  mdc     [patch to etherboot 4.7.24]
+      Major rewrite to include Linux tulip driver media detection
+      code.  This driver should support a lot more cards now.
+@@ -98,7 +99,6 @@
+      and thinguin mailing lists.
+ */
+ 
+-
+ /*********************************************************************/
+ /* Declarations                                                      */
+ /*********************************************************************/
+@@ -106,31 +106,29 @@
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ 
+ /* User settable parameters */
+ 
+-#undef   TULIP_DEBUG
+-#undef   TULIP_DEBUG_WHERE
++#undef	TULIP_DEBUG
++#undef	TULIP_DEBUG_WHERE
++#ifdef	TULIP_DEBUG
+ static int tulip_debug = 2;             /* 1 normal messages, 0 quiet .. 7 verbose. */
++#endif
+ 
+ #define TX_TIME_OUT       2*TICKS_PER_SEC
+ 
+-typedef unsigned char  u8;
+-typedef   signed char  s8;
+-typedef unsigned short u16;
+-typedef   signed short s16;
+-typedef unsigned int   u32;
+-typedef   signed int   s32;
++typedef uint8_t    u8;
++typedef  int8_t    s8;
++typedef uint16_t   u16;
++typedef  int16_t   s16;
++typedef uint32_t   u32;
++typedef  int32_t   s32;
+ 
+ /* helpful macros if on a big_endian machine for changing byte order.
+    not strictly needed on Intel */
+-#define le16_to_cpu(val) (val)
+-#define cpu_to_le32(val) (val)
+ #define get_unaligned(ptr) (*(ptr))
+ #define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+ #define get_u16(ptr) (*(u16 *)(ptr))
+-#define virt_to_bus(x) ((unsigned long)x)
+ #define virt_to_le32desc(addr)  virt_to_bus(addr)
+ 
+ #define TULIP_IOTYPE  PCI_USES_MASTER | PCI_USES_IO | PCI_ADDR0
+@@ -212,6 +210,8 @@
+       TULIP_IOTYPE, 256, PNIC2 },
+     { "ADMtek AN981 Comet", { 0x09811317, 0xffffffff, 0, 0, 0, 0 },
+       TULIP_IOTYPE, 256, COMET },
++    { "ADMTek AN983 Comet", { 0x12161113, 0xffffffff, 0, 0, 0, 0 },
++      TULIP_IOTYPE, 256, COMET },
+     { "ADMtek Centaur-P", { 0x09851317, 0xffffffff, 0, 0, 0, 0 },
+       TULIP_IOTYPE, 256, COMET },
+     { "ADMtek Centaur-C", { 0x19851317, 0xffffffff, 0, 0, 0, 0 },
+@@ -280,9 +280,13 @@
+ static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, };
+ static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
+ 
++/* not used
+ static u16 t21142_csr13[] = { 0x0001, 0x0009, 0x0009, 0x0000, 0x0001, };
++*/
+ static u16 t21142_csr14[] = { 0xFFFF, 0x0705, 0x0705, 0x0000, 0x7F3D, };
++/* not used
+ static u16 t21142_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
++*/
+ 
+ /* Offsets to the Command and Status Registers, "CSRs".  All accesses
+    must be longword instructions and quadword aligned. */
+@@ -300,6 +304,14 @@
+     TxFIFOUnderflow=0x20, TxJabber=0x08, TxNoBuf=0x04, TxDied=0x02, TxIntr=0x01,
+ };
+ 
++/* The configuration bits in CSR6. */
++enum csr6_mode_bits {
++	TxOn=0x2000, RxOn=0x0002, FullDuplex=0x0200,
++	AcceptBroadcast=0x0100, AcceptAllMulticast=0x0080,
++	AcceptAllPhys=0x0040, AcceptRunt=0x0008,
++};
++
++
+ enum desc_status_bits {
+     DescOwnded=0x80000000, RxDescFatalErr=0x8000, RxWholePkt=0x0300,
+ };
+@@ -384,21 +396,11 @@
+ 
+ #define TX_RING_SIZE	2
+ static struct tulip_tx_desc tx_ring[TX_RING_SIZE] __attribute__ ((aligned(4)));
+-
+-#ifdef USE_LOWMEM_BUFFER
+-#define txb ((char *)0x10000 - BUFLEN)
+-#else
+ static unsigned char txb[BUFLEN] __attribute__ ((aligned(4)));
+-#endif
+ 
+ #define RX_RING_SIZE	4
+ static struct tulip_rx_desc rx_ring[RX_RING_SIZE] __attribute__ ((aligned(4)));
+-
+-#ifdef USE_LOWMEM_BUFFER
+-#define rxb ((char *)0x10000 - RX_RING_SIZE * BUFLEN - BUFLEN)
+-#else
+ static unsigned char rxb[RX_RING_SIZE * BUFLEN] __attribute__ ((aligned(4)));
+-#endif
+ 
+ static struct tulip_private {
+     int cur_rx;
+@@ -471,7 +473,6 @@
+ static const char * block_name[] = {"21140 non-MII", "21140 MII PHY",
+                                     "21142 Serial PHY", "21142 MII PHY", "21143 SYM PHY", "21143 reset method"};
+ 
+-
+ /*********************************************************************/
+ /* Function Prototypes                                               */
+ /*********************************************************************/
+@@ -479,14 +480,13 @@
+ static void mdio_write(struct nic *nic, int phy_id, int location, int value);
+ static int read_eeprom(unsigned long ioaddr, int location, int addr_len);
+ static void parse_eeprom(struct nic *nic);
+-struct nic *tulip_probe(struct nic *nic, unsigned short *io_addrs,
+-                        struct pci_device *pci);
++static int tulip_probe(struct dev *dev, struct pci_device *pci);
+ static void tulip_init_ring(struct nic *nic);
+ static void tulip_reset(struct nic *nic);
+ static void tulip_transmit(struct nic *nic, const char *d, unsigned int t,
+                            unsigned int s, const char *p);
+-static int tulip_poll(struct nic *nic);
+-static void tulip_disable(struct nic *nic);
++static int tulip_poll(struct nic *nic, int retrieve);
++static void tulip_disable(struct dev *dev);
+ static void nway_start(struct nic *nic);
+ static void pnic_do_nway(struct nic *nic);
+ static void select_media(struct nic *nic, int startup);
+@@ -504,7 +504,6 @@
+ static void tulip_more(void);
+ #endif
+ 
+-
+ /*********************************************************************/
+ /* Utility Routines                                                  */
+ /*********************************************************************/
+@@ -535,7 +534,6 @@
+         /* wait */ ;
+ }
+ 
+-
+ /*********************************************************************/
+ /* Media Descriptor Code                                             */
+ /*********************************************************************/
+@@ -565,7 +563,7 @@
+    MDIO protocol.  See the MII specifications or DP83840A data sheet
+    for details. */
+ 
+-int mdio_read(struct nic *nic, int phy_id, int location)
++int mdio_read(struct nic *nic __unused, int phy_id, int location)
+ {
+     int i;
+     int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+@@ -626,7 +624,7 @@
+     return (retval>>1) & 0xffff;
+ }
+ 
+-void mdio_write(struct nic *nic, int phy_id, int location, int value)
++void mdio_write(struct nic *nic __unused, int phy_id, int location, int value)
+ {
+     int i;
+     int cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
+@@ -682,7 +680,6 @@
+     }
+ }
+ 
+-
+ /*********************************************************************/
+ /* EEPROM Reading Code                                               */
+ /*********************************************************************/
+@@ -727,7 +724,6 @@
+     return retval;
+ }
+ 
+-
+ /*********************************************************************/
+ /* EEPROM Parsing Code                                               */
+ /*********************************************************************/
+@@ -895,11 +891,10 @@
+     }
+ }
+ 
+-
+ /*********************************************************************/
+ /* tulip_init_ring - setup the tx and rx descriptors                */
+ /*********************************************************************/
+-static void tulip_init_ring(struct nic *nic)
++static void tulip_init_ring(struct nic *nic __unused)
+ {
+     int i;
+ 
+@@ -935,7 +930,22 @@
+     /* Mark the last entry as wrapping the ring, though this should never happen */
+     tx_ring[1].length  = cpu_to_le32(DESC_RING_WRAP | BUFLEN);
+ }
+-
++
++static void set_rx_mode(struct nic *nic __unused) {
++	int csr6 = inl(ioaddr + CSR6) & ~0x00D5;
++
++	tp->csr6 &= ~0x00D5;
++ 
++	/* !IFF_PROMISC */
++	tp->csr6 |= AcceptAllMulticast;
++	csr6 |= AcceptAllMulticast;
++
++	outl(csr6, ioaddr + CSR6);
++
++	
++	
++}
++
+ /*********************************************************************/
+ /* eth_reset - Reset adapter                                         */
+ /*********************************************************************/
+@@ -943,7 +953,6 @@
+ {
+     int i;
+     unsigned long to;
+-    u32 addr_low, addr_high;
+ 
+ #ifdef TULIP_DEBUG_WHERE
+     whereami("tulip_reset\n");
+@@ -956,7 +965,7 @@
+     if (tp->mii_cnt  ||  (tp->mtable  &&  tp->mtable->has_mii)) {
+ 	outl(0x814C0000, ioaddr + CSR6);
+     }
+-  
++ 
+     /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
+     outl(0x00000001, ioaddr + CSR0);
+     tulip_wait(1);
+@@ -1022,8 +1031,8 @@
+     }
+ 
+     /* Point to rx and tx descriptors */
+-    outl((unsigned long)&rx_ring[0], ioaddr + CSR3);
+-    outl((unsigned long)&tx_ring[0], ioaddr + CSR4);
++    outl(virt_to_le32desc(&rx_ring[0]), ioaddr + CSR3);
++    outl(virt_to_le32desc(&tx_ring[0]), ioaddr + CSR4);
+ 
+     init_media(nic);
+ 
+@@ -1049,11 +1058,12 @@
+     if (tp->chip_id == LC82C168)
+ 	tulip_check_duplex(nic);
+ 
++    set_rx_mode(nic); 	
++        
+     /* enable transmit and receive */
+     outl(tp->csr6 | 0x00002002, ioaddr + CSR6);
+ }
+ 
+-
+ /*********************************************************************/
+ /* eth_transmit - Transmit a frame                                   */
+ /*********************************************************************/
+@@ -1095,7 +1105,7 @@
+     tx_ring[0].status = cpu_to_le32(0x80000000);
+ 
+     /* Point to transmit descriptor */
+-    outl((u32)&tx_ring[0], ioaddr + CSR4);
++    outl(virt_to_le32desc(&tx_ring[0]), ioaddr + CSR4);
+ 
+     /* Enable Tx */
+     outl(csr6 | 0x00002000, ioaddr + CSR6);
+@@ -1113,11 +1123,11 @@
+     /* Disable Tx */
+     outl(csr6 & ~0x00002000, ioaddr + CSR6);
+ }
+-
++
+ /*********************************************************************/
+ /* eth_poll - Wait for a frame                                       */
+ /*********************************************************************/
+-static int tulip_poll(struct nic *nic)
++static int tulip_poll(struct nic *nic, int retrieve)
+ {
+ 
+ #ifdef TULIP_DEBUG_WHERE
+@@ -1128,6 +1138,8 @@
+     if (rx_ring[tp->cur_rx].status & 0x80000000)
+         return 0;
+ 
++    if ( ! retrieve ) return 1;
++
+ #ifdef TULIP_DEBUG_WHERE
+     whereami("tulip_poll got one\n");
+ #endif
+@@ -1151,17 +1163,20 @@
+ 
+     return 1;
+ }
+-
++
+ /*********************************************************************/
+ /* eth_disable - Disable the interface                               */
+ /*********************************************************************/
+-static void tulip_disable(struct nic *nic)
++static void tulip_disable(struct dev *dev)
+ {
+-
++    struct nic *nic = (struct nic *)dev;
+ #ifdef TULIP_DEBUG_WHERE
+     whereami("tulip_disable\n");
+ #endif
+ 
++    /* merge reset and disable */
++    tulip_reset(nic);
++
+     /* disable interrupts */
+     outl(0x00000000, ioaddr + CSR7);
+ 
+@@ -1171,24 +1186,41 @@
+     /* Clear the missed-packet counter. */
+     (volatile unsigned long)inl(ioaddr + CSR8);
+ }
+-
++
++/*********************************************************************/
++/*IRQ - Enable, Disable, or Force interrupts                         */
++/*********************************************************************/
++static void tulip_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
+ /*********************************************************************/
+ /* eth_probe - Look for an adapter                                   */
+ /*********************************************************************/
+-struct nic *tulip_probe(struct nic *nic, unsigned short *io_addrs,
+-                        struct pci_device *pci)
++static int tulip_probe(struct dev *dev, struct pci_device *pci)
+ {
+-    u32 i, l1, l2;
++    struct nic *nic = (struct nic *)dev;
++    u32 i;
+     u8  chip_rev;
+     u8 ee_data[EEPROM_SIZE];
+     unsigned short sum;
+     int chip_idx;
+     static unsigned char last_phys_addr[ETH_ALEN] = {0x00, 'L', 'i', 'n', 'u', 'x'};
+ 
+-    if (io_addrs == 0 || *io_addrs == 0)
++    if (pci->ioaddr == 0)
+         return 0;
+ 
+-    ioaddr         = *io_addrs;
++    ioaddr         = pci->ioaddr;
++    nic->ioaddr    = pci->ioaddr & ~3;
++    nic->irqno     = 0;
+ 
+     /* point to private storage */
+     tp = &tpx;
+@@ -1378,15 +1410,15 @@
+     /* reset the device and make ready for tx and rx of packets */
+     tulip_reset(nic);
+ 
+-    nic->reset    = tulip_reset;
++    dev->disable  = tulip_disable;
+     nic->poll     = tulip_poll;
+     nic->transmit = tulip_transmit;
+-    nic->disable  = tulip_disable;
++    nic->irq      = tulip_irq;
+ 
+     /* give the board a chance to reset before returning */
+     tulip_wait(4*TICKS_PER_SEC);
+ 
+-    return nic;
++    return 1;
+ }
+ 
+ static void start_link(struct nic *nic)
+@@ -1508,7 +1540,7 @@
+     }
+ }
+ 
+-static void nway_start(struct nic *nic)
++static void nway_start(struct nic *nic __unused)
+ {
+     int csr14 = ((tp->sym_advertise & 0x0780) << 9)  |
+         ((tp->sym_advertise&0x0020)<<1) | 0xffbf;
+@@ -1662,7 +1694,7 @@
+     }
+ }
+ 
+-static void pnic_do_nway(struct nic *nic)
++static void pnic_do_nway(struct nic *nic __unused)
+ {
+     u32 phy_reg = inl(ioaddr + 0xB8);
+     u32 new_csr6 = tp->csr6 & ~0x40C40200;
+@@ -1886,8 +1918,8 @@
+         }
+     } else if (tp->chip_id == DC21040) {                                        /* 21040 */
+         /* Turn on the xcvr interface. */
+-        int csr12 = inl(ioaddr + CSR12);
+ #ifdef TULIP_DEBUG
++        int csr12 = inl(ioaddr + CSR12);
+         if (tulip_debug > 1)
+             printf("%s: 21040 media type is %s, CSR12 is %hhX.\n",
+                    tp->nic_name, medianame[tp->if_port], csr12);
+@@ -1987,3 +2019,51 @@
+ 
+         return 0;
+ }
++
++static struct pci_id tulip_nics[] = {
++PCI_ROM(0x1011, 0x0002, "dc21040",     "Digital Tulip"),
++PCI_ROM(0x1011, 0x0009, "ds21140",     "Digital Tulip Fast"),
++PCI_ROM(0x1011, 0x0014, "dc21041",     "Digital Tulip+"),
++PCI_ROM(0x1011, 0x0019, "ds21142",     "Digital Tulip 21142"),
++PCI_ROM(0x10b7, 0x9300, "3csoho100b-tx","3ComSOHO100B-TX"),
++PCI_ROM(0x10b9, 0x5261, "ali1563",     "ALi 1563 integrated ethernet"),
++PCI_ROM(0x10d9, 0x0512, "mx98713",     "Macronix MX987x3"),
++PCI_ROM(0x10d9, 0x0531, "mx98715",     "Macronix MX987x5"),
++PCI_ROM(0x1113, 0x1217, "mxic-98715",  "Macronix MX987x5"),
++PCI_ROM(0x11ad, 0xc115, "lc82c115",    "LinkSys LNE100TX"),
++PCI_ROM(0x11ad, 0x0002, "82c168",      "Netgear FA310TX"),
++PCI_ROM(0x1282, 0x9100, "dm9100",      "Davicom 9100"),
++PCI_ROM(0x1282, 0x9102, "dm9102",      "Davicom 9102"),
++PCI_ROM(0x1282, 0x9009, "dm9009",      "Davicom 9009"),
++PCI_ROM(0x1282, 0x9132, "dm9132",      "Davicom 9132"),
++PCI_ROM(0x1317, 0x0985, "centaur-p",   "ADMtek Centaur-P"),
++PCI_ROM(0x1317, 0x0981, "an981",       "ADMtek AN981 Comet"),		/* ADMTek Centaur-P (stmicro) */
++PCI_ROM(0x1113, 0x1216, "an983",       "ADMTek AN983 Comet"),
++PCI_ROM(0x1317, 0x9511, "an983b",      "ADMTek Comet 983b"),
++PCI_ROM(0x1317, 0x1985, "centaur-c",   "ADMTek Centaur-C"),
++PCI_ROM(0x8086, 0x0039, "intel21145",  "Intel Tulip"),
++PCI_ROM(0x125b, 0x1400, "ax88140",     "ASIX AX88140"),
++PCI_ROM(0x11f6, 0x9881, "rl100tx",     "Compex RL100-TX"),
++PCI_ROM(0x115d, 0x0003, "xircomtulip", "Xircom Tulip"),
++PCI_ROM(0x104a, 0x0981, "tulip-0981",  "Tulip 0x104a 0x0981"),
++PCI_ROM(0x104a, 0x2774, "tulip-2774",  "Tulip 0x104a 0x2774"),
++PCI_ROM(0x1113, 0x9511, "tulip-9511",  "Tulip 0x1113 0x9511"),
++PCI_ROM(0x1186, 0x1561, "tulip-1561",  "Tulip 0x1186 0x1561"),
++PCI_ROM(0x1259, 0xa120, "tulip-a120",  "Tulip 0x1259 0xa120"),
++PCI_ROM(0x13d1, 0xab02, "tulip-ab02",  "Tulip 0x13d1 0xab02"),
++PCI_ROM(0x13d1, 0xab03, "tulip-ab03",  "Tulip 0x13d1 0xab03"),
++PCI_ROM(0x13d1, 0xab08, "tulip-ab08",  "Tulip 0x13d1 0xab08"),
++PCI_ROM(0x14f1, 0x1803, "lanfinity",   "Conexant LANfinity"),
++PCI_ROM(0x1626, 0x8410, "tulip-8410",  "Tulip 0x1626 0x8410"),
++PCI_ROM(0x1737, 0xab08, "tulip-1737-ab08","Tulip 0x1737 0xab08"),
++PCI_ROM(0x1737, 0xab09, "tulip-ab09",  "Tulip 0x1737 0xab09"),
++};
++
++struct pci_driver tulip_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "Tulip",
++	.probe    = tulip_probe,
++	.ids      = tulip_nics,
++	.id_count = sizeof(tulip_nics)/sizeof(tulip_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/netboot/tulip.txt grub-0.97/netboot/tulip.txt
+--- grub-0.97.orig/netboot/tulip.txt	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/tulip.txt	1970-01-01 00:00:00.000000000 +0000
+@@ -1,53 +0,0 @@
+-This software may be used and distributed according to the terms of
+-the GNU Public License, incorporated herein by reference.
+-
+-This is a tulip and clone driver for Etherboot.  See the revision
+-history in the tulip.c file for information on changes.  This version
+-of the driver incorporates changes from Bob Edwards and Paul Mackerras
+-who cantributed changes to support the TRENDnet TE100-PCIA NIC which
+-uses a genuine Intel 21143-PD chipset.  There are also various code
+-cleanups to make time-based activities more reliable.
+-
+-Of course you have to have all the usual Etherboot environment
+-(bootp/dhcp/NFS) set up, and you need a Linux kernel with v0.91g
+-(7.16.99) or later of the tulip.c driver compiled in to support some
+-MX98715 based cards.  That file is available at:
+-
+-  http://cesdis.gsfc.nasa.gov/linux/drivers/test/tulip.c
+-
+-NOTES
+-
+-I've tested this driver with a SOHOware Fast 10/100 Model SDA110A,
+-a Linksys LNE100TX v2.0, and a Netgear FA310TX card, and it worked at
+-both 10 and 100 mbits. Other cards based on the tulip family may work as
+-well.
+-
+-These cards are about 20$US, are supported by Linux and now Etherboot,
+-and being PCI, they auto-configure IRQ and IOADDR and auto-negotiate
+-10/100 half/full duplex. It seems like a pretty good value compared to
+-some of the pricier cards, and can lower the cost of building/adapting
+-thin client workstations substantially while giving a considerable
+-performance increase.
+-
+-On some PCI tulip clone chipsets (MX987x5, LC82C115, LC82C168) this driver 
+-lets the card choose the fastest speed it can negotiate with the peer
+-device.  On other cards, it chooses 10mbit half-duplex.
+-
+-I burned an AM27C256 (32KByte) EPROM with mx987x5.lzrom and it worked.
+-According to the data sheet the MX98715A supports up to 64K (27C512)
+-EPROMs, 
+-
+-I've liberally commented the code and header files in the hope that it
+-will help the next person who hacks the code or needs to support some
+-tulip clone card, or wishes to add functionality.
+-
+-Anyway, please test this if you can on your tulip based card, and let
+-me (mdc@thinguin.org) and the netboot list (netboot@baghira.han.de)
+-know how things go.  I also would appreciate code review by people who
+-program.  I'm a strong believer in "another set of eyes".
+-
+-Regards,
+-
+-Marty Connor
+-mdc@thinguin.org
+-http://www.thinguin.org/
+diff -Naur grub-0.97.orig/netboot/types.h grub-0.97/netboot/types.h
+--- grub-0.97.orig/netboot/types.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/types.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,44 @@
++#ifndef _TYPES_H
++#define _TYPES_H
++
++/* I'm architecture independed :-) */
++
++/* 
++ * It's architecture depended headers for common integer types
++ */
++#include "stdint.h"
++
++/* 
++ * Here are some RPC types define from linux /usr/include/rpc/types.h
++ */
++typedef int bool_t;
++typedef int enum_t;
++typedef uint32_t rpcprog_t;
++typedef uint32_t rpcvers_t;
++typedef uint32_t rpcproc_t;
++typedef uint32_t rpcprot_t;
++typedef uint32_t rpcport_t;
++
++/* For bool_t */
++/* typedef enum { */
++/*  	FALSE = 0, */
++/*  	TRUE = 1 */
++/* } boolean_t; */
++
++
++
++/* Some BSD or RPC style types */
++typedef unsigned char u_char;
++typedef unsigned short u_short;
++typedef unsigned int u_int;
++typedef unsigned long u_long;
++typedef long long quad_t;
++typedef unsigned long long u_quad_t;
++typedef struct {
++	int __val[2];
++}fsid_t;			/* Type of file system IDs, from bits/types.h */
++
++typedef int daddr_t;		/* The type of a disk address, from bits/types.h */
++typedef char * caddr_t;
++
++#endif /* _TYPES_H */
+diff -Naur grub-0.97.orig/netboot/udp.h grub-0.97/netboot/udp.h
+--- grub-0.97.orig/netboot/udp.h	1970-01-01 00:00:00.000000000 +0000
++++ grub-0.97/netboot/udp.h	2005-08-31 19:03:35.000000000 +0000
+@@ -0,0 +1,30 @@
++#ifndef	_UDP_H
++#define	_UDP_H
++
++/* We need 'uint16_t' and 'uint8_t'  */
++#include "types.h"
++/* We need 'in_addr' */
++#include "in.h"
++
++struct udp_pseudo_hdr {
++	in_addr  src;
++	in_addr  dest;
++	uint8_t  unused;
++	uint8_t  protocol;
++	uint16_t len;
++};
++struct udphdr {
++	uint16_t src;
++	uint16_t dest;
++	uint16_t len;
++	uint16_t chksum;
++};
++
++extern void build_udp_hdr(unsigned long __destip, unsigned int __srcsock, 
++	      unsigned int __destsock, int __ttl, int __len, 
++	      const void * __buf);
++
++extern int udp_transmit(unsigned long __destip, unsigned int __srcsock,
++			unsigned int __destsock, int __len, const void * __buf);
++
++#endif	/* _UDP_H */
+diff -Naur grub-0.97.orig/netboot/via-rhine.c grub-0.97/netboot/via-rhine.c
+--- grub-0.97.orig/netboot/via-rhine.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/via-rhine.c	2005-08-31 19:03:35.000000000 +0000
+@@ -18,7 +18,7 @@
+ 
+ */
+ 
+-static const char *version = "rhine.c v1.0.0 2000-01-07\n";
++static const char *version = "rhine.c v1.0.1 2003-02-06\n";
+ 
+ /* A few user-configurable values. */
+ 
+@@ -46,7 +46,6 @@
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ 
+ /* define all ioaddr */
+ 
+@@ -103,6 +102,11 @@
+ #define byCFGD				ioaddr + 0x7b
+ #define wTallyCntMPA			ioaddr + 0x7c
+ #define wTallyCntCRC			ioaddr + 0x7d
++#define bySTICKHW			ioaddr + 0x83
++#define byWOLcrClr			ioaddr + 0xA4
++#define byWOLcgClr			ioaddr + 0xA7
++#define byPwrcsrClr			ioaddr + 0xAC
++
+ /*---------------------  Exioaddr Definitions -------------------------*/
+ 
+ /*
+@@ -617,9 +621,6 @@
+ 
+ */
+ 
+-#define PCI_VENDOR_ID_FET		0x1106
+-#define PCI_DEVICE_ID_FET_3043		0x3043
+-
+ /* The rest of these values should never change. */
+ #define NUM_TX_DESC	2	/* Number of Tx descriptor registers. */
+ 
+@@ -652,23 +653,19 @@
+ }
+ rhine;
+ 
+-static struct nic *rhine_probe1 (struct nic *dev, int ioaddr,
++static void rhine_probe1 (struct nic *nic, int ioaddr,
+ 				 int chip_id, int options);
+ static int QueryAuto (int);
+ static int ReadMII (int byMIIIndex, int);
+ static void WriteMII (char, char, char, int);
+ static void MIIDelay (void);
+ static void rhine_init_ring (struct nic *dev);
+-static void rhine_disable (struct nic *nic);
++static void rhine_disable (struct dev *dev);
+ static void rhine_reset (struct nic *nic);
+-static int rhine_poll (struct nic *nic);
++static int rhine_poll (struct nic *nic, int retreive);
+ static void rhine_transmit (struct nic *nic, const char *d, unsigned int t,
+ 			    unsigned int s, const char *p);
+ 
+-/* Linux support functions */
+-#define virt_to_bus(x) ((unsigned long)x)
+-#define bus_to_virt(x) ((void *)x)
+-
+ /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+ static void
+ rhine_init_ring (struct nic *nic)
+@@ -854,26 +851,99 @@
+     }
+ }
+ 
+-struct nic *
+-rhine_probe (struct nic *nic, unsigned short *probeaddrs,
+-	       struct pci_device *pci)
++/* Offsets to the device registers. */
++enum register_offsets {
++        StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
++        IntrStatus=0x0C, IntrEnable=0x0E,
++        MulticastFilter0=0x10, MulticastFilter1=0x14,
++        RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
++        MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
++        MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
++        ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
++        RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
++        StickyHW=0x83, IntrStatus2=0x84, WOLcrClr=0xA4, WOLcgClr=0xA7,
++        PwrcsrClr=0xAC,
++};
++
++/* Bits in the interrupt status/mask registers. */
++enum intr_status_bits {
++        IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
++        IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
++        IntrPCIErr=0x0040,
++        IntrStatsMax=0x0080, IntrRxEarly=0x0100,
++        IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
++        IntrTxAborted=0x2000, IntrLinkChange=0x4000,
++        IntrRxWakeUp=0x8000,
++        IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
++        IntrTxDescRace=0x080000,        /* mapped from IntrStatus2 */
++        IntrTxErrSummary=0x082218,
++};
++#define DEFAULT_INTR (IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | \
++                   IntrRxDropped | IntrRxNoBuf) 
++
++/***************************************************************************
++ IRQ - PXE IRQ Handler
++***************************************************************************/
++void rhine_irq ( struct nic *nic, irq_action_t action ) {
++     struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
++     /* Enable interrupts by setting the interrupt mask. */
++     unsigned int intr_status;
++
++     switch ( action ) {
++          case DISABLE :
++          case ENABLE :
++               intr_status = inw(nic->ioaddr + IntrStatus);
++               /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
++               if (tp->chip_id == 0x3065)
++                   intr_status |= inb(nic->ioaddr + IntrStatus2) << 16;
++               intr_status = (intr_status & ~DEFAULT_INTR);
++               if ( action == ENABLE ) 
++                   intr_status = intr_status | DEFAULT_INTR;
++               outw(intr_status, nic->ioaddr + IntrEnable);
++               break;
++         case FORCE :
++               outw(0x0010, nic->ioaddr + 0x84);
++               break;
++         }
++}
++
++static int
++rhine_probe (struct dev *dev, struct pci_device *pci)
+ {
++    struct nic *nic = (struct nic *)dev;
++    struct rhine_private *tp = &rhine;
+     if (!pci->ioaddr)
+-	return NULL;
+-    nic = rhine_probe1 (nic, pci->ioaddr, 0, -1);
++	return 0;
++    rhine_probe1 (nic, pci->ioaddr, pci->dev_id, -1);
+ 
+-    if (nic)
+-	adjust_pci_device(pci);
+-    nic->poll = rhine_poll;
+-    nic->transmit = rhine_transmit;
+-    nic->reset = rhine_reset;
+-    nic->disable = rhine_disable;
++    adjust_pci_device(pci);
+     rhine_reset (nic);
+ 
+-    return nic;
++    dev->disable  = rhine_disable;
++    nic->poll     = rhine_poll;
++    nic->transmit = rhine_transmit;
++    nic->irqno	  = pci->irq;
++    nic->irq      = rhine_irq;
++    nic->ioaddr   = tp->ioaddr;
++
++
++    return 1;
++}
++
++static void set_rx_mode(struct nic *nic __unused) {
++    	struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
++	unsigned char rx_mode;
++    	int ioaddr = tp->ioaddr;
++
++	/* ! IFF_PROMISC */
++	outl(0xffffffff, byMAR0);
++	outl(0xffffffff, byMAR4);
++	rx_mode = 0x0C;
++
++	outb(0x60 /* thresh */ | rx_mode, byRCR );
+ }
+ 
+-static struct nic *
++static void
+ rhine_probe1 (struct nic *nic, int ioaddr, int chip_id, int options)
+ {
+     struct rhine_private *tp;
+@@ -885,6 +955,29 @@
+ 
+     if (rhine_debug > 0 && did_version++ == 0)
+ 	printf (version);
++
++    /* D-Link provided reset code (with comment additions) */
++    if((chip_id != 0x3043) && (chip_id != 0x6100)) {
++	unsigned char byOrgValue;
++	
++	if(rhine_debug > 0)
++		printf("Enabling Sticky Bit Workaround for Chip_id: 0x%hX\n"
++				, chip_id);
++	/* clear sticky bit before reset & read ethernet address */
++	byOrgValue = inb(bySTICKHW);
++	byOrgValue = byOrgValue & 0xFC;
++	outb(byOrgValue, bySTICKHW);
++
++	/* (bits written are cleared?) */
++	/* disable force PME-enable */
++	outb(0x80, byWOLcgClr);
++	/* disable power-event config bit */
++	outb(0xFF, byWOLcrClr);
++	/* clear power status (undocumented in vt6102 docs?) */
++	outb(0xFF, byPwrcsrClr);
++	
++    }
++
+     /* Perhaps this should be read from the EEPROM? */
+     for (i = 0; i < ETH_ALEN; i++)
+ 	nic->node_addr[i] = inb (byPAR0 + i);
+@@ -920,6 +1013,7 @@
+ 	}
+ #endif
+ 
++    
+     /* query MII to know LineSpeed,duplex mode */
+     byMIIvalue = inb (ioaddr + 0x6d);
+     LineSpeed = byMIIvalue & MIISR_SPEED;
+@@ -971,15 +1065,19 @@
+ 	if (tp->default_port)
+ 	    tp->medialock = 1;
+     }
+-    return nic;
++    return;
+ }
+ 
+-static void
+-rhine_disable (struct nic *nic)
++static void 
++rhine_disable (struct dev *dev)
+ {
++    struct nic *nic = (struct nic *)dev;
+     struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
+     int ioaddr = tp->ioaddr;
+ 
++    /* merge reset and disable */
++    rhine_reset(nic);
++
+     printf ("rhine disable\n");
+     /* Switch to loopback mode to avoid hardware races. */
+     writeb(0x60 | 0x01, byTCR);
+@@ -1002,17 +1100,10 @@
+     int rx_bufs_tmp, rx_bufs_tmp1;
+     int tx_bufs_tmp, tx_bufs_tmp1;
+ 
+-#ifdef	USE_LOWMEM_BUFFER
+-#define buf1 (0x10000 - (RX_RING_SIZE * PKT_BUF_SZ + 32))
+-#define buf2 (buf1 - (RX_RING_SIZE * PKT_BUF_SZ + 32))
+-#define desc1 (buf2 - (TX_RING_SIZE * sizeof (struct rhine_tx_desc) + 32))
+-#define desc2 (desc1 - (TX_RING_SIZE * sizeof (struct rhine_tx_desc) + 32))
+-#else
+     static char buf1[RX_RING_SIZE * PKT_BUF_SZ + 32];
+     static char buf2[RX_RING_SIZE * PKT_BUF_SZ + 32];
+     static char desc1[TX_RING_SIZE * sizeof (struct rhine_tx_desc) + 32];
+     static char desc2[TX_RING_SIZE * sizeof (struct rhine_tx_desc) + 32];
+-#endif
+ 
+     /* printf ("rhine_reset\n"); */
+     /* Soft reset the chip. */
+@@ -1069,6 +1160,9 @@
+     outl (virt_to_bus (tp->rx_ring), dwCurrentRxDescAddr);
+     outl (virt_to_bus (tp->tx_ring), dwCurrentTxDescAddr);
+ 
++    /* Setup Multicast */	
++    set_rx_mode(nic);
++
+     /* close IMR */
+     outw (0x0000, byIMR0);
+ 
+@@ -1093,15 +1187,34 @@
+     /*set IMR to work */
+     outw (IMRShadow, byIMR0);
+ }
++/* Beware of PCI posted writes */
++#define IOSYNC  do { readb(nic->ioaddr + StationAddr); } while (0)
+ 
+ static int
+-rhine_poll (struct nic *nic)
++rhine_poll (struct nic *nic, int retreive)
+ {
+     struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
+     int rxstatus, good = 0;;
+ 
+     if (tp->rx_ring[tp->cur_rx].rx_status.bits.own_bit == 0)
+     {
++        unsigned int intr_status;
++        /* There is a packet ready */
++        if(!retreive)
++            return 1;
++
++        intr_status = inw(nic->ioaddr + IntrStatus);
++        /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
++#if 0
++	if (tp->chip_id == 0x3065)
++	  intr_status |= inb(nic->ioaddr + IntrStatus2) << 16;
++#endif
++        /* Acknowledge all of the current interrupt sources ASAP. */
++        if (intr_status & IntrTxDescRace)
++           outb(0x08, nic->ioaddr + IntrStatus2);
++        outw(intr_status & 0xffff, nic->ioaddr + IntrStatus);
++	IOSYNC;
++
+ 	rxstatus = tp->rx_ring[tp->cur_rx].rx_status.lw;
+ 	if ((rxstatus & 0x0300) != 0x0300)
+ 	{
+@@ -1124,6 +1237,11 @@
+ 	tp->cur_rx++;
+ 	tp->cur_rx = tp->cur_rx % RX_RING_SIZE;
+     }
++        /* Acknowledge all of the current interrupt sources ASAP. */
++        outw(DEFAULT_INTR & ~IntrRxDone, nic->ioaddr + IntrStatus);
++
++        IOSYNC;
++
+     return good;
+ }
+ 
+@@ -1152,7 +1270,7 @@
+     while (s < ETH_ZLEN)
+ 	*((char *) tp->tx_buffs[entry] + ETH_HLEN + (s++)) = 0;
+ 
+-    tp->tx_ring[entry].tx_ctrl.bits.tx_buf_size = ETH_HLEN + s;
++    tp->tx_ring[entry].tx_ctrl.bits.tx_buf_size = s;
+ 
+     tp->tx_ring[entry].tx_status.bits.own_bit = 1;
+ 
+@@ -1170,6 +1288,9 @@
+     /*printf("td4=[%X]",inl(dwCurrentTDSE3)); */
+ 
+     outb (CR1bak, byCR1);
++    /* Wait until transmit is finished */
++    while (tp->tx_ring[entry].tx_status.bits.own_bit != 0)
++	;
+     tp->cur_tx++;
+ 
+     /*outw(IMRShadow,byIMR0); */
+@@ -1177,4 +1298,21 @@
+     /*tp->tx_skbuff[entry] = 0; */
+ }
+ 
++static struct pci_id rhine_nics[] = {
++PCI_ROM(0x1106, 0x3065, "dlink-530tx",     "VIA 6102"),
++PCI_ROM(0x1106, 0x3106, "via-rhine-6105",  "VIA 6105"),
++PCI_ROM(0x1106, 0x3043, "dlink-530tx-old", "VIA 3043"),		/* Rhine-I 86c100a */
++PCI_ROM(0x1106, 0x3053, "via6105m",        "VIA 6105M"),	
++PCI_ROM(0x1106, 0x6100, "via-rhine-old",   "VIA 86C100A"),	/* Rhine-II */
++};
++
++struct pci_driver rhine_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "VIA 86C100",
++	.probe    = rhine_probe,
++	.ids      = rhine_nics,
++	.id_count = sizeof(rhine_nics)/sizeof(rhine_nics[0]),
++	.class    = 0,
++};
++
+ /* EOF via-rhine.c */
+diff -Naur grub-0.97.orig/netboot/w89c840.c grub-0.97/netboot/w89c840.c
+--- grub-0.97.orig/netboot/w89c840.c	2003-07-09 11:45:38.000000000 +0000
++++ grub-0.97/netboot/w89c840.c	2005-08-31 19:03:35.000000000 +0000
+@@ -43,6 +43,9 @@
+  *                                       using timer2 routines. Proposed
+  *                                       by Ken Yap to eliminate CPU speed
+  *                                       dependency.
++ *             Dec 12 2003  V0.94   timlegge	Fixed issues in 5.2, removed 
++ *             					interrupt usage, enabled
++ *             					multicast support
+  *
+  * This is the etherboot driver for cards based on Winbond W89c840F chip.
+  *
+@@ -77,10 +80,9 @@
+ #include "etherboot.h"
+ #include "nic.h"
+ #include "pci.h"
+-#include "cards.h"
+ #include "timer.h"
+ 
+-static const char *w89c840_version = "diver Version 0.92 - August 27, 2000";
++static const char *w89c840_version = "driver Version 0.94 - December 12, 2003";
+ 
+ typedef unsigned char  u8;
+ typedef   signed char  s8;
+@@ -90,9 +92,6 @@
+ typedef   signed int   s32;
+ 
+ /* Linux support functions */
+-#define virt_to_bus(x) ((unsigned long)x)
+-#define bus_to_virt(x) ((void *)x)
+-
+ #define virt_to_le32desc(addr)  virt_to_bus(addr)
+ #define le32desc_to_virt(addr)  bus_to_virt(addr)
+ 
+@@ -109,7 +108,6 @@
+    bonding and packet priority.
+    There are no ill effects from too-large receive rings. */
+ #define TX_RING_SIZE    2
+-
+ #define RX_RING_SIZE    2
+ 
+ /* The presumed FIFO size for working around the Tx-FIFO-overflow bug.
+@@ -260,32 +258,20 @@
+ 
+ static int ioaddr;
+ static unsigned short eeprom [0x40];
+-
+-#ifdef    USE_LOWMEM_BUFFER
+-#define rx_packet ((char *)0x10000 - PKT_BUF_SZ * RX_RING_SIZE)
+-#define tx_packet ((char *)0x10000 - PKT_BUF_SZ * RX_RING_SIZE - PKT_BUF_SZ * TX_RING_SIZE)
+-#else
+ static char        rx_packet[PKT_BUF_SZ * RX_RING_SIZE];
+ static char        tx_packet[PKT_BUF_SZ * TX_RING_SIZE];
+-#endif
+ 
+ static int  eeprom_read(long ioaddr, int location);
+ static int  mdio_read(int base_address, int phy_id, int location);
++#if 0
+ static void mdio_write(int base_address, int phy_id, int location, int value);
++#endif
+ 
+ static void check_duplex(void);
+ static void set_rx_mode(void);
+ static void init_ring(void);
+ 
+-/*
+-static void wait_long_time(void)
+-{
+-    printf("Paused - please read output above this line\n");
+-    sleep(3);
+-}
+-*/
+-
+-#if defined W89C840_DEBUG
++#if defined(W89C840_DEBUG)
+ static void decode_interrupt(u32 intr_status)
+ {
+     printf("Interrupt status: ");
+@@ -349,15 +335,17 @@
+     check_duplex();
+     set_rx_mode();
+ 
+-    /* Clear and Enable interrupts by setting the interrupt mask. */
++    /* Do not enable the interrupts Etherboot doesn't need them */
++/*
+     writel(0x1A0F5, ioaddr + IntrStatus);
+     writel(0x1A0F5, ioaddr + IntrEnable);
+-
++*/
+ #if defined(W89C840_DEBUG)
+     printf("winbond-840 : Done reset.\n");
+ #endif
+ }
+ 
++#if 0
+ static void handle_intr(u32 intr_stat)
+ {
+     if ((intr_stat & (NormalIntr|AbnormalIntr)) == 0) {
+@@ -372,7 +360,7 @@
+         /* There was an abnormal interrupt */
+         printf("\n-=- Abnormal interrupt.\n");
+ 
+-#if defined (W89C840_DEBUG)
++#if defined(W89C840_DEBUG)
+         decode_interrupt(intr_stat);
+ #endif
+ 
+@@ -383,19 +371,21 @@
+         }
+     }
+ }
++#endif
+ 
+ /**************************************************************************
+ w89c840_poll - Wait for a frame
+ ***************************************************************************/
+-static int w89c840_poll(struct nic *nic)
++static int w89c840_poll(struct nic *nic, int retrieve)
+ {
+     /* return true if there's an ethernet packet ready to read */
+     /* nic->packet should contain data on return */
+     /* nic->packetlen should contain length of data */
+     int packet_received = 0;
+ 
++#if defined(W89C840_DEBUG)
+     u32 intr_status = readl(ioaddr + IntrStatus);
+-    /* handle_intr(intr_status); */ /* -- handled later */
++#endif
+ 
+     do {
+         /* Code from netdev_rx(dev) */
+@@ -411,6 +401,11 @@
+             break;
+         }
+ 
++        if ( !retrieve ) {
++            packet_received = 1;
++            break;
++        }
++
+         if ((status & 0x38008300) != 0x0300) {
+             if ((status & 0x38000300) != 0x0300) {
+                 /* Ingore earlier buffers. */
+@@ -478,11 +473,7 @@
+         entry = (++w840private.cur_rx) % RX_RING_SIZE;
+         w840private.rx_head_desc = &w840private.rx_ring[entry];
+     } while (0);
+-
+-    if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr |TimerInt | IntrTxStopped)) {
+-        handle_intr(intr_status);
+-    }
+-
++    
+     return packet_received;
+ }
+ 
+@@ -521,13 +512,13 @@
+ 
+     w840private.tx_ring[entry].buffer1 = virt_to_le32desc(tx_packet);
+ 
+-    w840private.tx_ring[entry].length = (DescWholePkt | s);
++    w840private.tx_ring[entry].length = (DescWholePkt | (u32) s);
+     if (entry >= TX_RING_SIZE-1)         /* Wrap ring */
+         w840private.tx_ring[entry].length |= (DescIntr | DescEndRing);
+     w840private.tx_ring[entry].status = (DescOwn);
+     w840private.cur_tx++;
+ 
+-    w840private.tx_q_bytes += s;
++    w840private.tx_q_bytes = (u16) s;
+     writel(0, ioaddr + TxStartDemand);
+ 
+     /* Work around horrible bug in the chip by marking the queue as full
+@@ -550,33 +541,29 @@
+     load_timer2(TX_TIMEOUT);
+ 
+     {
++#if defined W89C840_DEBUG
+         u32 intr_stat = 0;
+-
++#endif
+         while (1) {
+ 
+-            intr_stat = readl(ioaddr + IntrStatus);
+ #if defined(W89C840_DEBUG)
+-            decode_interrupt(intr_stat);
++	      decode_interrupt(intr_stat);
+ #endif
+ 
+-            if (intr_stat & (NormalIntr | IntrTxDone)) {
+-
+                 while ( (transmit_status & DescOwn) && timer2_running()) {
+ 
+                     transmit_status = w840private.tx_ring[entry].status;
+                 }
+ 
+-                writel(intr_stat & 0x0001ffff, ioaddr + IntrStatus);
+                 break;
+-            }
+         }
+     }
+ 
+     if ((transmit_status & DescOwn) == 0) {
+ 
+ #if defined(W89C840_DEBUG)
+-        printf("winbond-840 : transmission complete after %d wait loop iterations, status %X\n",
+-               TX_LOOP_COUNT - transmit_loop_counter, w840private.tx_ring[entry].status);
++        printf("winbond-840 : transmission complete after wait loop iterations, status %X\n",
++                w840private.tx_ring[entry].status);
+ #endif
+ 
+         return;
+@@ -592,8 +579,12 @@
+ /**************************************************************************
+ w89c840_disable - Turn off ethernet interface
+ ***************************************************************************/
+-static void w89c840_disable(struct nic *nic)
++static void w89c840_disable(struct dev *dev)
+ {
++    struct nic *nic = (struct nic *)dev;
++    /* merge reset and disable */
++    w89c840_reset(nic);
++
+     /* Don't know what to do to disable the board. Is this needed at all? */
+     /* Yes, a live NIC can corrupt the loaded memory later [Ken] */
+     /* Stop the chip's Tx and Rx processes. */
+@@ -601,20 +592,37 @@
+ }
+ 
+ /**************************************************************************
++w89c840_irq - Enable, Disable, or Force interrupts
++***************************************************************************/
++static void w89c840_irq(struct nic *nic __unused, irq_action_t action __unused)
++{
++  switch ( action ) {
++  case DISABLE :
++    break;
++  case ENABLE :
++    break;
++  case FORCE :
++    break;
++  }
++}
++
++/**************************************************************************
+ w89c840_probe - Look for an adapter, this routine's visible to the outside
+ ***************************************************************************/
+-struct nic *w89c840_probe(struct nic *nic, unsigned short *probe_addrs, struct pci_device *p)
++static int w89c840_probe(struct dev *dev, struct pci_device *p)
+ {
++    struct nic *nic = (struct nic *)dev;
+     u16 sum = 0;
+-    int i, j, to;
++    int i, j;
+     unsigned short value;
+-    int options;
+-    int promisc;
+ 
+-    if (probe_addrs == 0 || probe_addrs[0] == 0)
++    if (p->ioaddr == 0)
+         return 0;
+ 
+-    ioaddr = probe_addrs[0]; /* Mask the bit that says "this is an io addr" */
++    ioaddr      = p->ioaddr;
++    nic->ioaddr = p->ioaddr & ~3;
++    nic->irqno  = 0;
++
+ 
+ #if defined(W89C840_DEBUG)
+     printf("winbond-840: PCI bus %hhX device function %hhX: I/O address: %hX\n", p->bus, p->devfn, ioaddr);
+@@ -622,8 +630,6 @@
+ 
+     ioaddr = ioaddr & ~3; /* Mask the bit that says "this is an io addr" */
+ 
+-    /* if probe_addrs is 0, then routine can use a hardwired default */
+-
+     /* From Matt Hortman <mbhortman@acpthinclient.com> */
+     if (p->vendor == PCI_VENDOR_ID_WINBOND2
+         && p->dev_id == PCI_DEVICE_ID_WINBOND2_89C840) {
+@@ -689,14 +695,14 @@
+     }
+ 
+     /* point to NIC specific routines */
+-    nic->reset = w89c840_reset;
+-    nic->poll = w89c840_poll;
++    dev->disable  = w89c840_disable;
++    nic->poll     = w89c840_poll;
+     nic->transmit = w89c840_transmit;
+-    nic->disable = w89c840_disable;
++    nic->irq      = w89c840_irq;
+ 
+     w89c840_reset(nic);
+ 
+-    return nic;
++    return 1;
+ }
+ 
+ /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.  These are
+@@ -814,6 +820,7 @@
+     return (retval>>1) & 0xffff;
+ }
+ 
++#if 0
+ static void mdio_write(int base_address, int phy_id, int location, int value)
+ {
+     long mdio_addr = base_address + MIICtrl;
+@@ -844,6 +851,7 @@
+     }
+     return;
+ }
++#endif
+ 
+ static void check_duplex(void)
+ {
+@@ -877,12 +885,10 @@
+     memset(mc_filter, 0xff, sizeof(mc_filter));
+ 
+ /*
+- * Actually, should work OK with multicast enabled. -- iko
+- */
+-/*
+- *  rx_mode = AcceptBroadcast | AcceptMyPhys | AcceptMulticast;
++ * works OK with multicast enabled. 
+  */
+-    rx_mode = AcceptBroadcast | AcceptMyPhys;
++
++    rx_mode = AcceptBroadcast | AcceptMyPhys | AcceptMulticast;
+ 
+     writel(mc_filter[0], ioaddr + MulticastFilter0);
+     writel(mc_filter[1], ioaddr + MulticastFilter1);
+@@ -932,3 +938,18 @@
+     }
+     return;
+ }
++
++
++static struct pci_id w89c840_nics[] = {
++PCI_ROM(0x1050, 0x0840, "winbond840",     "Winbond W89C840F"),
++PCI_ROM(0x11f6, 0x2011, "compexrl100atx", "Compex RL100ATX"),
++};
++
++struct pci_driver w89c840_driver = {
++	.type     = NIC_DRIVER,
++	.name     = "W89C840F",
++	.probe    = w89c840_probe,
++	.ids      = w89c840_nics,
++	.id_count = sizeof(w89c840_nics)/sizeof(w89c840_nics[0]),
++	.class    = 0,
++};
+diff -Naur grub-0.97.orig/stage2/disk_io.c grub-0.97/stage2/disk_io.c
+--- grub-0.97.orig/stage2/disk_io.c	2004-05-23 16:35:24.000000000 +0000
++++ grub-0.97/stage2/disk_io.c	2005-08-31 19:03:35.000000000 +0000
+@@ -25,6 +25,7 @@
+ #ifdef SUPPORT_NETBOOT
+ # define GRUB	1
+ # include <etherboot.h>
++# include <grub.h>
+ #endif
+ 
+ #ifdef GRUB_UTIL