Add AVR32 kernel patches for linux 2.6.22.1

2 files changed, 16734 insertions, 0 deletions

diff --git a/toolchain/kernel-headers/linux-2.6.22.1-003-atmel.3-avr32-updates.patch b/toolchain/kernel-headers/linux-2.6.22.1-003-atmel.3-avr32-updates.patch
new file mode 100644
index 000000000..9da7547b3
--- /dev/null
+++ b/toolchain/kernel-headers/linux-2.6.22.1-003-atmel.3-avr32-updates.patch
@@ -0,0 +1,14820 @@
+diff --git a/MAINTAINERS b/MAINTAINERS
+index df40a4e..3c5cfef 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -674,6 +674,13 @@ P:	Haavard Skinnemoen
+ M:	hskinnemoen@atmel.com
+ S:	Supported
+ 
++ATMEL USBA UDC DRIVER
++P:	Haavard Skinnemoen
++M:	hskinnemoen@atmel.com
++L:	kernel@avr32linux.org
++W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
++S:	Supported
++
+ ATMEL WIRELESS DRIVER
+ P:	Simon Kelley
+ M:	simon@thekelleys.org.uk
+diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
+index 3ec7658..ec6c7c5 100644
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -113,6 +113,13 @@ config BOARD_ATNGW100
+ 	bool "ATNGW100 Network Gateway"
+ endchoice
+ 
++if BOARD_ATSTK1000
++source "arch/avr32/boards/atstk1000/Kconfig"
++endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
++
+ choice
+ 	prompt "Boot loader type"
+ 	default LOADER_U_BOOT
+@@ -171,6 +178,10 @@ config OWNERSHIP_TRACE
+ 	  enabling Nexus-compliant debuggers to keep track of the PID of the
+ 	  currently executing task.
+ 
++config DW_DMAC
++	tristate "Synopsys DesignWare DMA Controller support"
++	default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+ 
+ source "kernel/Kconfig.hz"
+@@ -185,6 +196,27 @@ config CMDLINE
+ 
+ endmenu
+ 
++menu "Power managment options"
++
++menu "CPU Frequency scaling"
++
++source "drivers/cpufreq/Kconfig"
++
++config CPU_FREQ_AT32AP
++	bool "CPU frequency driver for AT32AP"
++	depends on CPU_FREQ && PLATFORM_AT32AP
++	default n
++	help
++	  This enables the CPU frequency driver for AT32AP processors.
++
++	  For details, take a look in <file:Documentation/cpu-freq>.
++
++	  If in doubt, say N.
++
++endmenu
++
++endmenu
++
+ menu "Bus options"
+ 
+ config PCI
+diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
+index dc6bc01..eb72198 100644
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
+ core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
+ core-y					+= arch/avr32/kernel/
+ core-y					+= arch/avr32/mm/
++drivers-y				+= arch/avr32/drivers/
+ libs-y					+= arch/avr32/lib/
+ 
+ archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
+diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
+new file mode 100644
+index 0000000..5d922df
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/Kconfig
+@@ -0,0 +1,12 @@
++# NGW100 customization
++
++config BOARD_ATNGW100_I2C_GPIO
++	bool "Use GPIO for i2c instead of built-in TWI module"
++	help
++	  The driver for the built-in TWI module has been plagued by
++	  various problems, while the i2c-gpio driver is based on the
++	  trusty old i2c-algo-bit bitbanging engine, making it work
++	  on pretty much any setup.
++
++	  Choose 'Y' here if you're having i2c-related problems and
++	  want to rule out the i2c bus driver.
+diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
+index 6c4dc0a..d649974 100644
+--- a/arch/avr32/boards/atngw100/setup.c
++++ b/arch/avr32/boards/atngw100/setup.c
+@@ -9,10 +9,12 @@
+  */
+ #include <linux/clk.h>
+ #include <linux/etherdevice.h>
++#include <linux/i2c-gpio.h>
+ #include <linux/init.h>
+ #include <linux/linkage.h>
+ #include <linux/platform_device.h>
+ #include <linux/types.h>
++#include <linux/leds.h>
+ #include <linux/spi/spi.h>
+ 
+ #include <asm/io.h>
+@@ -21,6 +23,7 @@
+ #include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
+ 
+ /* Initialized by bootloader-specific startup code. */
+ struct tag *bootloader_tags __initdata;
+@@ -39,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ 	},
+ };
+ 
++static struct mci_platform_data __initdata mci0_data = {
++	.detect_pin	= GPIO_PIN_PC(25),
++	.wp_pin		= GPIO_PIN_PE(0),
++};
++
+ /*
+  * The next two functions should go away as the boot loader is
+  * supposed to initialize the macb address registers with a valid
+@@ -100,8 +108,46 @@ void __init setup_board(void)
+ 	at32_setup_serial_console(0);
+ }
+ 
++static const struct gpio_led ngw_leds[] = {
++	{ .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
++		.default_trigger = "heartbeat",
++	},
++	{ .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
++	{ .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ngw_led_data = {
++	.num_leds =	ARRAY_SIZE(ngw_leds),
++	.leds =		(void *) ngw_leds,
++};
++
++static struct platform_device ngw_gpio_leds = {
++	.name =		"leds-gpio",
++	.id =		-1,
++	.dev = {
++		.platform_data = (void *) &ngw_led_data,
++	}
++};
++
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
++static struct i2c_gpio_platform_data i2c_gpio_data = {
++	.sda_pin	= GPIO_PIN_PA(6),
++	.scl_pin	= GPIO_PIN_PA(7),
++};
++
++static struct platform_device i2c_gpio_device = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &i2c_gpio_data,
++	},
++};
++#endif
++
+ static int __init atngw100_init(void)
+ {
++	unsigned	i;
++
+ 	/*
+ 	 * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
+ 	 * reserve any pins for it.
+@@ -115,6 +161,22 @@ static int __init atngw100_init(void)
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ 
+ 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++	at32_add_device_mci(0, &mci0_data);
++	at32_add_device_usba(0, NULL);
++
++	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
++		at32_select_gpio(ngw_leds[i].gpio,
++				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++	}
++	platform_device_register(&ngw_gpio_leds);
++
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
++	at32_select_gpio(i2c_gpio_data.sda_pin, 0);
++	at32_select_gpio(i2c_gpio_data.scl_pin, 0);
++	platform_device_register(&i2c_gpio_device);
++#else
++	at32_add_device_twi(0);
++#endif
+ 
+ 	return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
+new file mode 100644
+index 0000000..718578f
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -0,0 +1,79 @@
++# STK1000 customization
++
++if BOARD_ATSTK1002
++
++config BOARD_ATSTK1002_CUSTOM
++	bool "Non-default STK-1002 jumper settings"
++	help
++	  You will normally leave the jumpers on the CPU card at their
++	  default settings.  If you need to use certain peripherals,
++	  you will need to change some of those jumpers.
++
++if BOARD_ATSTK1002_CUSTOM
++
++config BOARD_ATSTK1002_SW1_CUSTOM
++	bool "SW1: use SSC1 (not SPI0)"
++	help
++	  This also prevents using the external DAC as an audio interface,
++	  and means you can't initialize the on-board QVGA display.
++
++config BOARD_ATSTK1002_SW2_CUSTOM
++	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
++	help
++	  If you change this you'll want an updated boot loader putting
++	  the console on UART-C not UART-A.
++
++config BOARD_ATSTK1002_SW3_CUSTOM
++	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
++	help
++	  This also prevents using the external DAC as an audio interface.
++
++config BOARD_ATSTK1002_SW4_CUSTOM
++	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
++	help
++	  To use the camera interface you'll need a custom card (on the
++	  PCI-format connector) connect a video sensor.
++
++config BOARD_ATSTK1002_SW5_CUSTOM
++	bool "SW5: use MACB1 (not LCDC)"
++
++config BOARD_ATSTK1002_SW6_CUSTOM
++	bool "SW6: more GPIOs (not MACB0)"
++
++endif	# custom
++
++config BOARD_ATSTK1002_SPI1
++	bool "Configure SPI1 controller"
++	depends on !BOARD_ATSTK1002_SW4_CUSTOM
++	help
++	  All the signals for the second SPI controller are available on
++	  GPIO lines and accessed through the J1 jumper block.  Say "y"
++	  here to configure that SPI controller.
++
++config BOARD_ATSTK1002_J2_LED
++	bool
++	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++
++choice
++	prompt "LEDs connected to J2:"
++	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++	optional
++	help
++	  Select this if you have jumpered the J2 jumper block to the
++	  LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
++	  IDC cable.  A default "heartbeat" trigger is provided, but
++	  you can of course override this.
++
++config BOARD_ATSTK1002_J2_LED8
++	bool "LED0..LED7"
++	help
++	  Select this if J2 is jumpered to LED0..LED7 amber leds.
++
++config BOARD_ATSTK1002_J2_RGB
++	bool "RGB leds"
++	help
++	  Select this if J2 is jumpered to the RGB leds.
++
++endchoice
++
++endif	# stk 1002
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index e253e86..c958fd4 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -11,10 +11,12 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
++#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+@@ -27,16 +29,47 @@
+ 
+ #include "atstk1000.h"
+ 
+-#define	SW2_DEFAULT		/* MMCI and UART_A available */
+ 
+ struct eth_addr {
+ 	u8 addr[6];
+ };
+ 
+ static struct eth_addr __initdata hw_addr[2];
+-static struct eth_platform_data __initdata eth_data[2];
++static struct eth_platform_data __initdata eth_data[2] = {
++	{
++		/*
++		 * The MDIO pullups on STK1000 are a bit too weak for
++		 * the autodetection to work properly, so we have to
++		 * mask out everything but the correct address.
++		 */
++		.phy_mask	= ~(1U << 16),
++	},
++	{
++		.phy_mask	= ~(1U << 17),
++	},
++};
++
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
++#endif
++#endif
+ 
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
+ 	{
+ 		/* QVGA display */
+ 		.modalias	= "ltv350qv",
+@@ -45,6 +78,18 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ 		.mode		= SPI_MODE_3,
+ 	},
+ };
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++static struct mci_platform_data __initdata mci0_data = {
++	.detect_pin	= GPIO_PIN_NONE,
++	.wp_pin		= GPIO_PIN_NONE,
++};
+ 
+ /*
+  * The next two functions should go away as the boot loader is
+@@ -101,12 +146,103 @@ static void __init set_hw_addr(struct platform_device *pdev)
+ 	clk_put(pclk);
+ }
+ 
+-void __init setup_board(void)
++#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
++
++static struct gpio_led stk_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++			.default_trigger = "heartbeat", },
++#else	/* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
++	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
++
++	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
++			.default_trigger = "heartbeat", },
++	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
++	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
++			.default_trigger = "heartbeat", },
++	/* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk_j2_led_data = {
++	.num_leds	= ARRAY_SIZE(stk_j2_led),
++	.leds		= stk_j2_led,
++};
++
++static struct platform_device stk_j2_led_dev = {
++	.name		= "leds-gpio",
++	.id		= 2,	/* gpio block J2 */
++	.dev		= {
++		.platform_data	= &stk_j2_led_data,
++	},
++};
++
++static void setup_j2_leds(void)
+ {
+-#ifdef	SW2_DEFAULT
+-	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++	unsigned	i;
++
++	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
++		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++	printk("STK1002: " LEDSTRING "\n");
++	platform_device_register(&stk_j2_led_dev);
++}
++
+ #else
++static void setup_j2_leds(void)
++{
++}
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++static void __init at73c213_set_clk(struct at73c213_board_info *info)
++{
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	info->dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
++}
++#endif
++#endif
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+ 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+ #endif
+ 	/* USART 2/unused: expansion connector */
+ 	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
+@@ -140,18 +276,46 @@ static int __init atstk1002_init(void)
+ 
+ 	at32_add_system_devices();
+ 
+-#ifdef	SW2_DEFAULT
+-	at32_add_device_usart(0);
+-#else
++#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+ 	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
+ #endif
+ 	at32_add_device_usart(2);
+ 
++#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+-
+-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
++	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++#else
+ 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+ 			     fbmem_start, fbmem_size);
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++	at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++	at32_add_device_mci(0, &mci0_data);
++#endif
++	at32_add_device_usba(0, NULL);
++	at32_add_device_abdac(0);
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++	setup_j2_leds();
++
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++	at73c213_set_clk(&at73c213_data);
++#endif
++#endif
+ 
+ 	return 0;
+ }
+diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
+index 49493ad..adce168 100644
+--- a/arch/avr32/configs/atngw100_defconfig
++++ b/arch/avr32/configs/atngw100_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.22.atmel.1
++# Thu Jul 12 17:49:20 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -114,6 +114,7 @@ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP7000=y
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+@@ -122,6 +123,7 @@ CONFIG_LOADER_U_BOOT=y
+ # CONFIG_AP7000_32_BIT_SMC is not set
+ CONFIG_AP7000_16_BIT_SMC=y
+ # CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -145,6 +147,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -153,6 +156,27 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+ 
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -187,13 +211,8 @@ CONFIG_NET_KEY=y
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_MULTIPLE_TABLES is not set
+-# CONFIG_IP_ROUTE_MULTIPATH is not set
+-# CONFIG_IP_ROUTE_VERBOSE is not set
+ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+@@ -240,6 +259,7 @@ CONFIG_IPV6_SIT=y
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+ 
+ #
+ # Core Netfilter Configuration
+@@ -284,6 +304,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -359,13 +380,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -521,7 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -545,13 +571,26 @@ CONFIG_NETDEVICES=y
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
+ 
+ #
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -625,7 +664,15 @@ CONFIG_UNIX98_PTYS=y
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -636,7 +683,42 @@ CONFIG_UNIX98_PTYS=y
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+ # SPI support
+@@ -655,7 +737,7 @@ CONFIG_SPI_ATMEL=y
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
+ 
+ #
+ # Dallas's 1-wire bus
+@@ -706,21 +788,59 @@ CONFIG_SPI_ATMEL=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
+ 
+ #
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
+ 
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=y
+ 
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+ 
+ #
+ # InfiniBand support
+@@ -733,7 +853,51 @@ CONFIG_SPI_ATMEL=y
+ #
+ # Real Time Clock
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
+ 
+ #
+ # DMA Engine support
+@@ -767,7 +931,8 @@ CONFIG_JBD=y
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -922,7 +1087,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
+index 3b977fd..3708066 100644
+--- a/arch/avr32/configs/atstk1002_defconfig
++++ b/arch/avr32/configs/atstk1002_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.22.atmel.2
++# Thu Jul 19 13:46:47 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -80,10 +80,10 @@ CONFIG_BASE_SMALL=1
+ #
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
++CONFIG_KMOD=y
+ 
+ #
+ # Block layer
+@@ -99,12 +99,12 @@ CONFIG_BLOCK=y
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+ 
+ #
+ # System Type and features
+@@ -117,6 +117,11 @@ CONFIG_CPU_AT32AP7000=y
+ CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
++# CONFIG_BOARD_ATSTK1002_SPI1 is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+@@ -125,6 +130,7 @@ CONFIG_LOADER_U_BOOT=y
+ # CONFIG_AP7000_32_BIT_SMC is not set
+ CONFIG_AP7000_16_BIT_SMC=y
+ # CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -148,6 +154,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -156,6 +163,27 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+ 
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -327,6 +355,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -373,7 +403,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -397,13 +427,26 @@ CONFIG_DUMMY=y
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++CONFIG_LXT_PHY=y
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
+ 
+ #
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -443,7 +486,42 @@ CONFIG_SLHC=m
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+ 
+ #
+ # Hardware I/O ports
+@@ -477,7 +555,15 @@ CONFIG_UNIX98_PTYS=y
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -488,13 +574,61 @@ CONFIG_UNIX98_PTYS=y
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
+ 
+ #
+ # Dallas's 1-wire bus
+@@ -517,19 +651,91 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+ 
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_LOGO is not set
+ 
+ #
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++
++#
++# HID Devices
++#
++# CONFIG_HID is not set
+ 
+ #
+ # USB support
+@@ -545,21 +751,59 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
+ 
+ #
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
+ 
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=m
+ 
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+ 
+ #
+ # InfiniBand support
+@@ -572,7 +816,50 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # Real Time Clock
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
+ 
+ #
+ # DMA Engine support
+@@ -590,11 +877,14 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +899,7 @@ CONFIG_INOTIFY_USER=y
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+ 
+ #
+ # CD-ROM/DVD Filesystems
+@@ -638,7 +928,7 @@ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+@@ -683,8 +973,14 @@ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
+new file mode 100644
+index 0000000..b429b75
+--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
+diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
+new file mode 100644
+index 0000000..224eb30
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.c
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++	CH_STATE_FREE = 0,
++	CH_STATE_ALLOCATED,
++	CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++	dma_addr_t	sar;
++	dma_addr_t	dar;
++	dma_addr_t	llp;
++	u32		ctllo;
++	u32		ctlhi;
++	u32		sstat;
++	u32		dstat;
++};
++
++struct dw_dma_block {
++	struct dw_dma_lli *lli_vaddr;
++	dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++	unsigned int state;
++        int is_cyclic;
++	struct dma_request_sg *req_sg;
++	struct dma_request_cyclic *req_cyclic;
++	unsigned int nr_blocks;
++	int direction;
++	struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++	spinlock_t lock;
++	void * __iomem	regs;
++	struct dma_pool *lli_pool;
++	struct clk *hclk;
++	struct dma_controller dma;
++	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++	__raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++			       + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++	for (i = 0; i < DMAC_NR_CHANNELS; i++)
++		if (dmac->channel[i].state == CH_STATE_FREE)
++			break;
++
++	if (i < DMAC_NR_CHANNELS) {
++		chan = &dmac->channel[i];
++		chan->state = CH_STATE_ALLOCATED;
++	} else {
++		i = -EBUSY;
++	}
++
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS
++	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++	dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++					    unsigned int nr_blocks)
++{
++	struct dw_dma_block *block;
++	void *p;
++	unsigned int i;
++
++	block = kmalloc(nr_blocks * sizeof(*block),
++			GFP_KERNEL);
++	if (unlikely(!block))
++		return NULL;
++
++	for (i = 0; i < nr_blocks; i++) {
++		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++				   &block[i].lli_dma_addr);
++		block[i].lli_vaddr = p;
++		if (unlikely(!p))
++			goto fail;
++	}
++
++	return block;
++
++fail:
++	for (i = 0; i < nr_blocks; i++) {
++		if (!block[i].lli_vaddr)
++			break;
++		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++			      block[i].lli_dma_addr);
++	}
++	kfree(block);
++	return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++			    struct dw_dma_channel *chan)
++{
++	unsigned int i;
++
++	if (chan->nr_blocks > 1) {
++		for (i = 0; i < chan->nr_blocks; i++)
++			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++				      chan->block[i].lli_dma_addr);
++		kfree(chan->block);
++	}
++
++	chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++				   struct dma_request_sg *req)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long ctlhi, ctllo, cfghi, cfglo;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++	int ret, i, direction;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++
++	ret = -EINVAL;
++	if (req->req.channel >= DMAC_NR_CHANNELS
++	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
++		spin_unlock_irqrestore(&dmac->lock, flags);
++		return -EINVAL;
++	}
++
++	chan = &dmac->channel[req->req.channel];
++	chan->state = CH_STATE_BUSY;
++	chan->req_sg = req;
++	chan->is_cyclic = 0;
++
++	/*
++	 * We have marked the channel as busy, so no need to keep the
++	 * lock as long as we only touch the channel-specific
++	 * registers
++	 */
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	/*
++	 * There may be limitations in the driver and/or the DMA
++	 * controller that prevents us from sending a whole
++	 * scatterlist item in one go.  Taking this into account,
++	 * calculate the number of block transfers we need to set up.
++	 *
++	 * FIXME: Let the peripheral driver know about the maximum
++	 * block size we support. We really don't want to use a
++	 * different block size than what was suggested by the
++	 * peripheral.
++	 *
++	 * Each block will get its own Linked List Item (LLI) below.
++	 */
++	block_size = req->block_size;
++	nr_blocks = req->nr_blocks;
++	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++		 block_size, nr_blocks, req->nr_sg);
++
++	BUG_ON(nr_blocks == 0);
++	chan->nr_blocks = nr_blocks;
++
++	ret = -EINVAL;
++	cfglo = cfghi = 0;
++	switch (req->direction) {
++	case DMA_DIR_MEM_TO_PERIPH:
++		direction = DMA_TO_DEVICE;
++		cfghi = req->periph_id << (43 - 32);
++		break;
++
++	case DMA_DIR_PERIPH_TO_MEM:
++		direction = DMA_FROM_DEVICE;
++		cfghi = req->periph_id << (39 - 32);
++		break;
++	default:
++		goto out_unclaim_channel;
++	}
++
++        chan->direction = direction;
++
++	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++	ctlhi = block_size >> req->width;
++	ctllo = ((req->direction << 20)
++		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
++		 | (req->width << 4) | (req->width << 1)
++		 | (1 << 0));		 // interrupt enable
++
++	if (nr_blocks == 1) {
++		/* Only one block: No need to use block chaining */
++		if (direction == DMA_TO_DEVICE) {
++			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++					    req->sg->dma_address);
++			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++					    req->data_reg);
++			ctllo |= 2 << 7; // no dst increment
++		} else {
++			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++					    req->data_reg);
++			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++					    req->sg->dma_address);
++			ctllo |= 2 << 9; // no src increment
++		}
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++	} else {
++		struct dw_dma_lli *lli, *lli_prev = NULL;
++		int j = 0, offset = 0;
++
++		ret = -ENOMEM;
++		chan->block = allocate_blocks(dmac, nr_blocks);
++		if (!chan->block)
++			goto out_unclaim_channel;
++
++		if (direction == DMA_TO_DEVICE)
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++		else
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++		/*
++		 * Map scatterlist items to blocks. One scatterlist
++		 * item may need more than one block for the reasons
++		 * mentioned above.
++		 */
++		for (i = 0; i < nr_blocks; i++) {
++			lli = chan->block[i].lli_vaddr;
++			if (lli_prev) {
++				lli_prev->llp = chan->block[i].lli_dma_addr;
++				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++					 i - 1, chan->block[i - 1].lli_vaddr,
++					 chan->block[i - 1].lli_dma_addr,
++					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
++					 lli_prev->ctllo, lli_prev->ctlhi);
++			}
++			lli->llp = 0;
++			lli->ctllo = ctllo;
++			lli->ctlhi = ctlhi;
++			if (direction == DMA_TO_DEVICE) {
++				lli->sar = req->sg[j].dma_address + offset;
++				lli->dar = req->data_reg;
++			} else {
++				lli->sar = req->data_reg;
++				lli->dar = req->sg[j].dma_address + offset;
++			}
++			lli_prev = lli;
++
++			offset += block_size;
++			if (offset > req->sg[j].length) {
++				j++;
++				offset = 0;
++			}
++		}
++
++		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++			 i - 1, chan->block[i - 1].lli_vaddr,
++			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++			 lli_prev->dar, lli_prev->llp,
++			 lli_prev->ctllo, lli_prev->ctlhi);
++
++		/*
++		 * SAR, DAR and CTL are initialized from the LLI. We
++		 * only have to enable the LLI bits in CTL.
++		 */
++		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++				    chan->block[0].lli_dma_addr);
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++	}
++
++	set_channel_bit(dmac, MASK_XFER, req->req.channel);
++	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++	if (req->req.block_complete)
++		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++	else
++		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++	return 0;
++
++out_unclaim_channel:
++	chan->state = CH_STATE_ALLOCATED;
++	return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++                                       struct dma_request_cyclic *req)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long ctlhi, ctllo, cfghi, cfglo;
++	unsigned long block_size;
++	int ret, i, direction;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++
++        block_size = (req->buffer_size/req->periods) >> req->width;
++
++	ret = -EINVAL;
++	if (req->req.channel >= DMAC_NR_CHANNELS
++	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++            || (req->periods == 0)
++	    || block_size > DMAC_MAX_BLOCKSIZE) {
++		spin_unlock_irqrestore(&dmac->lock, flags);
++		return -EINVAL;
++	}
++
++	chan = &dmac->channel[req->req.channel];
++	chan->state = CH_STATE_BUSY;
++	chan->is_cyclic = 1;
++        chan->req_cyclic = req;
++
++	/*
++	 * We have marked the channel as busy, so no need to keep the
++	 * lock as long as we only touch the channel-specific
++	 * registers
++	 */
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	/*
++          Setup
++	 */
++	BUG_ON(req->buffer_size % req->periods);
++	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++	chan->nr_blocks = req->periods;
++
++	ret = -EINVAL;
++	cfglo = cfghi = 0;
++	switch (req->direction) {
++	case DMA_DIR_MEM_TO_PERIPH:
++		direction = DMA_TO_DEVICE;
++		cfghi = req->periph_id << (43 - 32);
++		break;
++
++	case DMA_DIR_PERIPH_TO_MEM:
++		direction = DMA_FROM_DEVICE;
++		cfghi = req->periph_id << (39 - 32);
++		break;
++	default:
++		goto out_unclaim_channel;
++	}
++
++        chan->direction = direction;
++
++	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++	ctlhi = block_size;
++	ctllo = ((req->direction << 20)
++		 | (req->width << 4) | (req->width << 1)
++		 | (1 << 0));		 // interrupt enable
++
++        {
++		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++		ret = -ENOMEM;
++		chan->block = allocate_blocks(dmac, req->periods);
++		if (!chan->block)
++			goto out_unclaim_channel;
++
++		if (direction == DMA_TO_DEVICE)
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++		else
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++		/*
++		 * Set up a linked list items where each period gets
++		 * an item. The linked list item for the last period
++		 * points back to the star of the buffer making a
++		 * cyclic buffer.
++		 */
++		for (i = 0; i < req->periods; i++) {
++			lli = chan->block[i].lli_vaddr;
++			if (lli_prev) {
++				lli_prev->llp = chan->block[i].lli_dma_addr;
++				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++				   i - 1, chan->block[i - 1].lli_vaddr,
++				   chan->block[i - 1].lli_dma_addr,
++				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
++				   lli_prev->ctllo, lli_prev->ctlhi);*/
++			}
++			lli->llp = 0;
++			lli->ctllo = ctllo;
++			lli->ctlhi = ctlhi;
++			if (direction == DMA_TO_DEVICE) {
++				lli->sar = req->buffer_start + i*(block_size << req->width);
++				lli->dar = req->data_reg;
++			} else {
++				lli->sar = req->data_reg;
++				lli->dar = req->buffer_start + i*(block_size << req->width);
++			}
++			lli_prev = lli;
++		}
++		lli->llp = chan->block[0].lli_dma_addr;
++
++		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++		  i - 1, chan->block[i - 1].lli_vaddr,
++		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++		  lli_prev->dar, lli_prev->llp,
++		  lli_prev->ctllo, lli_prev->ctlhi); */
++
++		/*
++		 * SAR, DAR and CTL are initialized from the LLI. We
++		 * only have to enable the LLI bits in CTL.
++		 */
++		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++				    chan->block[0].lli_dma_addr);
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++	}
++
++	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++	if (req->req.block_complete)
++		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++	else
++		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++	return 0;
++
++out_unclaim_channel:
++	chan->state = CH_STATE_ALLOCATED;
++	return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++			      unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++	set_channel_bit(dmac, CH_EN, channel);
++
++	return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++                                       unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++        dma_addr_t current_pos;
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++        chan = &dmac->channel[channel];
++
++	switch (chan->direction) {
++	case DMA_TO_DEVICE:
++		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++		break;
++	case DMA_FROM_DEVICE:
++		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++		break;
++	default:
++		return 0;
++	}
++
++
++        if (!current_pos) {
++		if (chan->is_cyclic) {
++			current_pos = chan->req_cyclic->buffer_start;
++		} else {
++			current_pos = chan->req_sg->sg->dma_address;
++		}
++	}
++
++	return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++                             unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++	chan = &dmac->channel[channel];
++	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++		 dmac_chan_readl_lo(dmac, channel, DAR),
++		 dmac_chan_readl_lo(dmac, channel, LLP),
++		 dmac_chan_readl_hi(dmac, channel, CTL),
++		 dmac_chan_readl_lo(dmac, channel, CTL));
++
++	if (chan->state == CH_STATE_BUSY) {
++		clear_channel_bit(dmac, CH_EN, channel);
++		cleanup_channel(dmac, &dmac->channel[channel]);
++	}
++
++	return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++	while (status) {
++		struct dma_request *req;
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++                if (chan->is_cyclic) {
++			BUG_ON(!chan->req_cyclic
++			       || !chan->req_cyclic->req.block_complete);
++			req = &chan->req_cyclic->req;
++                } else {
++			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++			req = &chan->req_sg->req;
++                }
++		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++		req->block_complete(req);
++		status = dmac_readl_lo(dmac, STATUS_BLOCK);
++	}
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	struct dma_request *req;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_XFER);
++
++	while (status) {
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++                req = &chan->req_sg->req;
++                BUG_ON(!req);
++                cleanup_channel(dmac, chan);
++                if (req->xfer_complete)
++			req->xfer_complete(req);
++
++		status = dmac_readl_lo(dmac, STATUS_XFER);
++	}
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++	while (status) {
++		struct dma_request *req;
++
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++		clear_channel_bit(dmac, CH_EN, chanid);
++
++                if (chan->is_cyclic) {
++			BUG_ON(!chan->req_cyclic);
++			req = &chan->req_cyclic->req;
++                } else {
++			BUG_ON(!chan->req_sg);
++			req = &chan->req_sg->req;
++                }
++
++		cleanup_channel(dmac, chan);
++		if (req->error)
++			req->error(req);
++
++		status = dmac_readl_lo(dmac, STATUS_XFER);
++	}
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++	struct dw_dma_controller *dmac = dev_id;
++	unsigned long status;
++	int ret = IRQ_NONE;
++
++	spin_lock(&dmac->lock);
++
++	status = dmac_readl_lo(dmac, STATUS_INT);
++
++	while (status) {
++		ret = IRQ_HANDLED;
++		if (status & 0x10)
++			dmac_error(dmac);
++		if (status & 0x02)
++			dmac_block_complete(dmac);
++		if (status & 0x01)
++			dmac_xfer_complete(dmac);
++
++		status = dmac_readl_lo(dmac, STATUS_INT);
++	}
++
++	spin_unlock(&dmac->lock);
++	return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++	struct dw_dma_controller *dmac;
++	struct resource *regs;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++	if (!dmac)
++		return -ENOMEM;
++	memset(dmac, 0, sizeof(*dmac));
++
++	dmac->hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(dmac->hclk)) {
++		ret = PTR_ERR(dmac->hclk);
++		goto out_free_dmac;
++	}
++	clk_enable(dmac->hclk);
++
++	ret = -ENOMEM;
++	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++					 sizeof(struct dw_dma_lli), 4, 0);
++	if (!dmac->lli_pool)
++		goto out_disable_clk;
++
++	spin_lock_init(&dmac->lock);
++	dmac->dma.dev = &pdev->dev;
++	dmac->dma.alloc_channel = dmac_alloc_channel;
++	dmac->dma.release_channel = dmac_release_channel;
++	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++	dmac->dma.start_request = dmac_start_request;
++	dmac->dma.stop_request = dmac_stop_request;
++	dmac->dma.get_current_pos = dmac_get_current_pos;
++
++	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!dmac->regs)
++		goto out_free_pool;
++
++	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++			  IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++	if (ret)
++		goto out_unmap_regs;
++
++	/* Enable the DMA controller */
++	dmac_writel_lo(dmac, CFG, 1);
++
++	register_dma_controller(&dmac->dma);
++
++	printk(KERN_INFO
++	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++	return 0;
++
++out_unmap_regs:
++	iounmap(dmac->regs);
++out_free_pool:
++	dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++	clk_disable(dmac->hclk);
++	clk_put(dmac->hclk);
++out_free_dmac:
++	kfree(dmac);
++	return ret;
++}
++
++static struct platform_driver dmac_driver = {
++	.probe		= dmac_probe,
++	.driver		= {
++		.name		= "dmaca",
++	},
++};
++
++static int __init dmac_init(void)
++{
++	return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++	platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
+new file mode 100644
+index 0000000..1f67921
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.h
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG		0x398
++#define DW_DMAC_CH_EN		0x3a0
++
++#define DW_DMAC_STATUS_XFER	0x2e8
++#define DW_DMAC_STATUS_BLOCK	0x2f0
++#define DW_DMAC_STATUS_ERROR	0x308
++
++#define DW_DMAC_MASK_XFER	0x310
++#define DW_DMAC_MASK_BLOCK	0x318
++#define DW_DMAC_MASK_ERROR	0x330
++
++#define DW_DMAC_CLEAR_XFER	0x338
++#define DW_DMAC_CLEAR_BLOCK	0x340
++#define DW_DMAC_CLEAR_ERROR	0x358
++
++#define DW_DMAC_STATUS_INT	0x360
++
++#define DW_DMAC_CHAN_SAR	0x000
++#define DW_DMAC_CHAN_DAR	0x008
++#define DW_DMAC_CHAN_LLP	0x010
++#define DW_DMAC_CHAN_CTL	0x018
++#define DW_DMAC_CHAN_SSTAT	0x020
++#define DW_DMAC_CHAN_DSTAT	0x028
++#define DW_DMAC_CHAN_SSTATAR	0x030
++#define DW_DMAC_CHAN_DSTATAR	0x038
++#define DW_DMAC_CHAN_CFG	0x040
++#define DW_DMAC_CHAN_SGR	0x048
++#define DW_DMAC_CHAN_DSR	0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
+index 90e5aff..b6afc0c 100644
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -9,6 +9,7 @@ obj-y				+= syscall_table.o syscall-stubs.o irq.o
+ obj-y				+= setup.o traps.o semaphore.o ptrace.o
+ obj-y				+= signal.o sys_avr32.o process.o time.o
+ obj-y				+= init_task.o switch_to.o cpu.o
++obj-y				+= dma-controller.o
+ obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES)		+= kprobes.o
+ 
+diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
+new file mode 100644
+index 0000000..fb654b3
+--- /dev/null
++++ b/arch/avr32/kernel/dma-controller.c
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++	static int next_id;
++
++	dmac->id = next_id++;
++	list_add_tail(&dmac->list, &controllers);
++
++	return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++	struct dma_controller *dmac;
++
++	list_for_each_entry(dmac, &controllers, list)
++		if (dmac->id == id)
++			return dmac;
++	return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index b279d66..d08b0bc 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -313,7 +313,7 @@ __tagtable(ATAG_MEM, parse_tag_mem);
+ 
+ static int __init parse_tag_rdimg(struct tag *tag)
+ {
+-#ifdef CONFIG_INITRD
++#ifdef CONFIG_BLK_DEV_INITRD
+ 	struct tag_mem_range *mem = &tag->u.mem_range;
+ 	int ret;
+ 
+@@ -323,7 +323,7 @@ static int __init parse_tag_rdimg(struct tag *tag)
+ 		return 0;
+ 	}
+ 
+-	ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
++	ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
+ 				  "initrd");
+ 	if (ret) {
+ 		printk(KERN_WARNING
+diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
+index eb30783..43c5b9f 100644
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -26,6 +26,13 @@ config AP7000_8_BIT_SMC
+ 
+ endchoice
+ 
++config GPIO_DEV
++	bool "GPIO /dev interface"
++	select CONFIGFS_FS
++	default n
++	help
++	  Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+ 
+ endif # PLATFORM_AT32AP
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index f1d3957..250372a 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,3 +1,5 @@
+ obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+ obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
+ obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
++obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
++obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
+diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c
+index 90f207e..7c4987f 100644
+--- a/arch/avr32/mach-at32ap/at32ap.c
++++ b/arch/avr32/mach-at32ap/at32ap.c
+@@ -11,41 +11,10 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ 
+-#include <asm/io.h>
+-
+ #include <asm/arch/init.h>
+-#include <asm/arch/sm.h>
+-
+-struct at32_sm system_manager;
+-
+-static int __init at32_sm_init(void)
+-{
+-	struct resource *regs;
+-	struct at32_sm *sm = &system_manager;
+-	int ret = -ENXIO;
+-
+-	regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
+-	if (!regs)
+-		goto fail;
+-
+-	spin_lock_init(&sm->lock);
+-	sm->pdev = &at32_sm_device;
+-
+-	ret = -ENOMEM;
+-	sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
+-	if (!sm->regs)
+-		goto fail;
+-
+-	return 0;
+-
+-fail:
+-	printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
+-	return ret;
+-}
+ 
+ void __init setup_platform(void)
+ {
+-	at32_sm_init();
+ 	at32_clock_init();
+ 	at32_portmux_init();
+ }
+diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
+index 4dda42d..1130c8a 100644
+--- a/arch/avr32/mach-at32ap/at32ap7000.c
++++ b/arch/avr32/mach-at32ap/at32ap7000.c
+@@ -17,14 +17,20 @@
+ #include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/portmux.h>
+-#include <asm/arch/sm.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+ #include "clock.h"
+ #include "hmatrix.h"
+ #include "pio.h"
+-#include "sm.h"
++#include "pm.h"
++
++/*
++ * We can reduce the code size a bit by using a constant here. Since
++ * this file is completely chip-specific, it's safe to not use
++ * ioremap. Generic drivers should of course never do this.
++ */
++#define AT32_PM_BASE	0xfff00000
+ 
+ #define PBMEM(base)					\
+ 	{						\
+@@ -88,6 +94,8 @@ static struct clk devname##_##_name = {				\
+ 	.index		= _index,				\
+ }
+ 
++static DEFINE_SPINLOCK(pm_lock);
++
+ unsigned long at32ap7000_osc_rates[3] = {
+ 	[0] = 32768,
+ 	/* FIXME: these are ATSTK1002-specific */
+@@ -104,11 +112,11 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+ {
+ 	unsigned long div, mul, rate;
+ 
+-	if (!(control & SM_BIT(PLLEN)))
++	if (!(control & PM_BIT(PLLEN)))
+ 		return 0;
+ 
+-	div = SM_BFEXT(PLLDIV, control) + 1;
+-	mul = SM_BFEXT(PLLMUL, control) + 1;
++	div = PM_BFEXT(PLLDIV, control) + 1;
++	mul = PM_BFEXT(PLLMUL, control) + 1;
+ 
+ 	rate = clk->parent->get_rate(clk->parent);
+ 	rate = (rate + div / 2) / div;
+@@ -121,7 +129,7 @@ static unsigned long pll0_get_rate(struct clk *clk)
+ {
+ 	u32 control;
+ 
+-	control = sm_readl(&system_manager, PM_PLL0);
++	control = pm_readl(PLL0);
+ 
+ 	return pll_get_rate(clk, control);
+ }
+@@ -130,7 +138,7 @@ static unsigned long pll1_get_rate(struct clk *clk)
+ {
+ 	u32 control;
+ 
+-	control = sm_readl(&system_manager, PM_PLL1);
++	control = pm_readl(PLL1);
+ 
+ 	return pll_get_rate(clk, control);
+ }
+@@ -187,108 +195,139 @@ static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+ 
+ static void cpu_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_CPU_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(CPU_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_CPU_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(CPU_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long cpu_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(CPUDIV))
+-		shift = SM_BFEXT(CPUSEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CPUDIV))
++		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+ 
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, child_div, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(CKSEL);
++
++	if (control & PM_BIT(HSBDIV))
++		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++	else
++		child_div = 1;
++
++	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(CPUDIV);
++	} else {
++		unsigned int cpusel;
++		div = (parent_rate + rate / 2) / rate;
++		if (div > child_div)
++			div = child_div;
++		cpusel = (div > 1) ? (fls(div) - 2) : 0;
++		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++		actual_rate = parent_rate / (1 << (cpusel + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(CKSEL, control);
++
++	return actual_rate;
++}
++
+ static void hsb_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_HSB_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(HSB_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_HSB_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(HSB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long hsb_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(HSBDIV))
+-		shift = SM_BFEXT(HSBSEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(HSBDIV))
++		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+ 
+ static void pba_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_PBA_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBA_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_PBA_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(PBA_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long pba_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(PBADIV))
+-		shift = SM_BFEXT(PBASEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBADIV))
++		shift = PM_BFEXT(PBASEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+ 
+ static void pbb_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_PBB_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBB_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_PBB_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(PBB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long pbb_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(PBBDIV))
+-		shift = SM_BFEXT(PBBSEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBBDIV))
++		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+@@ -296,6 +335,7 @@ static unsigned long pbb_clk_get_rate(struct clk *clk)
+ static struct clk cpu_clk = {
+ 	.name		= "cpu",
+ 	.get_rate	= cpu_clk_get_rate,
++	.set_rate	= cpu_clk_set_rate,
+ 	.users		= 1,
+ };
+ static struct clk hsb_clk = {
+@@ -327,12 +367,12 @@ static void genclk_mode(struct clk *clk, int enabled)
+ {
+ 	u32 control;
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++	control = pm_readl(GCCTRL(clk->index));
+ 	if (enabled)
+-		control |= SM_BIT(CEN);
++		control |= PM_BIT(CEN);
+ 	else
+-		control &= ~SM_BIT(CEN);
+-	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
++		control &= ~PM_BIT(CEN);
++	pm_writel(GCCTRL(clk->index), control);
+ }
+ 
+ static unsigned long genclk_get_rate(struct clk *clk)
+@@ -340,9 +380,9 @@ static unsigned long genclk_get_rate(struct clk *clk)
+ 	u32 control;
+ 	unsigned long div = 1;
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+-	if (control & SM_BIT(DIVEN))
+-		div = 2 * (SM_BFEXT(DIV, control) + 1);
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(DIVEN))
++		div = 2 * (PM_BFEXT(DIV, control) + 1);
+ 
+ 	return clk->parent->get_rate(clk->parent) / div;
+ }
+@@ -353,23 +393,22 @@ static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+ 	unsigned long parent_rate, actual_rate, div;
+ 
+ 	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++	control = pm_readl(GCCTRL(clk->index));
+ 
+ 	if (rate > 3 * parent_rate / 4) {
+ 		actual_rate = parent_rate;
+-		control &= ~SM_BIT(DIVEN);
++		control &= ~PM_BIT(DIVEN);
+ 	} else {
+ 		div = (parent_rate + rate) / (2 * rate) - 1;
+-		control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN);
++		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+ 		actual_rate = parent_rate / (2 * (div + 1));
+ 	}
+ 
+-	printk("clk %s: new rate %lu (actual rate %lu)\n",
+-	       clk->name, rate, actual_rate);
++	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++		clk->name, rate, actual_rate);
+ 
+ 	if (apply)
+-		sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index,
+-			  control);
++		pm_writel(GCCTRL(clk->index), control);
+ 
+ 	return actual_rate;
+ }
+@@ -378,24 +417,24 @@ int genclk_set_parent(struct clk *clk, struct clk *parent)
+ {
+ 	u32 control;
+ 
+-	printk("clk %s: new parent %s (was %s)\n",
+-	       clk->name, parent->name, clk->parent->name);
++	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++		clk->name, parent->name, clk->parent->name);
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++	control = pm_readl(GCCTRL(clk->index));
+ 
+ 	if (parent == &osc1 || parent == &pll1)
+-		control |= SM_BIT(OSCSEL);
++		control |= PM_BIT(OSCSEL);
+ 	else if (parent == &osc0 || parent == &pll0)
+-		control &= ~SM_BIT(OSCSEL);
++		control &= ~PM_BIT(OSCSEL);
+ 	else
+ 		return -EINVAL;
+ 
+ 	if (parent == &pll0 || parent == &pll1)
+-		control |= SM_BIT(PLLSEL);
++		control |= PM_BIT(PLLSEL);
+ 	else
+-		control &= ~SM_BIT(PLLSEL);
++		control &= ~PM_BIT(PLLSEL);
+ 
+-	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
++	pm_writel(GCCTRL(clk->index), control);
+ 	clk->parent = parent;
+ 
+ 	return 0;
+@@ -408,11 +447,11 @@ static void __init genclk_init_parent(struct clk *clk)
+ 
+ 	BUG_ON(clk->index > 7);
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+-	if (control & SM_BIT(OSCSEL))
+-		parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(OSCSEL))
++		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+ 	else
+-		parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
++		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+ 
+ 	clk->parent = parent;
+ }
+@@ -420,21 +459,53 @@ static void __init genclk_init_parent(struct clk *clk)
+ /* --------------------------------------------------------------------
+  *  System peripherals
+  * -------------------------------------------------------------------- */
+-static struct resource sm_resource[] = {
+-	PBMEM(0xfff00000),
+-	NAMED_IRQ(19, "eim"),
+-	NAMED_IRQ(20, "pm"),
+-	NAMED_IRQ(21, "rtc"),
+-};
+-struct platform_device at32_sm_device = {
+-	.name		= "sm",
+-	.id		= 0,
+-	.resource	= sm_resource,
+-	.num_resources	= ARRAY_SIZE(sm_resource),
++static struct resource at32_pm0_resource[] = {
++	{
++		.start	= 0xfff00000,
++		.end	= 0xfff0007f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(20),
+ };
+-static struct clk at32_sm_pclk = {
++
++static struct resource at32ap700x_rtc0_resource[] = {
++	{
++		.start	= 0xfff00080,
++		.end	= 0xfff000af,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++	{
++		.start	= 0xfff000b0,
++		.end	= 0xfff000bf,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct resource at32_eic0_resource[] = {
++	{
++		.start	= 0xfff00100,
++		.end	= 0xfff0013f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
+ 	.name		= "pclk",
+-	.dev		= &at32_sm_device.dev,
++	.dev		= &at32_pm0_device.dev,
+ 	.parent		= &pbb_clk,
+ 	.mode		= pbb_clk_mode,
+ 	.get_rate	= pbb_clk_get_rate,
+@@ -491,6 +562,17 @@ static struct clk pico_clk = {
+ 	.users		= 1,
+ };
+ 
++static struct resource dmaca0_resource[] = {
++	{
++		.start	= 0xff200000,
++		.end	= 0xff20ffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
+ /* --------------------------------------------------------------------
+  * HMATRIX
+  * -------------------------------------------------------------------- */
+@@ -583,12 +665,14 @@ DEV_CLK(mck, pio4, pba, 14);
+ 
+ void __init at32_add_system_devices(void)
+ {
+-	system_manager.eim_first_irq = EIM_IRQ_BASE;
+-
+-	platform_device_register(&at32_sm_device);
++	platform_device_register(&at32_pm0_device);
+ 	platform_device_register(&at32_intc0_device);
++	platform_device_register(&at32ap700x_rtc0_device);
++	platform_device_register(&at32_wdt0_device);
++	platform_device_register(&at32_eic0_device);
+ 	platform_device_register(&smc0_device);
+ 	platform_device_register(&pdc_device);
++	platform_device_register(&dmaca0_device);
+ 
+ 	platform_device_register(&at32_systc0_device);
+ 
+@@ -894,6 +978,83 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+ }
+ 
+ /* --------------------------------------------------------------------
++ *  TWI
++ * -------------------------------------------------------------------- */
++
++static struct resource atmel_twi0_resource[] = {
++	PBMEM(0xffe00800),
++	IRQ(5),
++};
++DEFINE_DEV(atmel_twi, 0);
++DEV_CLK(pclk,atmel_twi0,pba,2);
++
++struct platform_device *__init
++at32_add_device_twi(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_twi0_device;
++		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
++		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
++		break;
++
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct mci_platform_data atmel_mci0_data = {
++	.detect_pin	= GPIO_PIN_NONE,
++	.wp_pin		= GPIO_PIN_NONE,
++};
++static struct resource atmel_mci0_resource[] = {
++	PBMEM(0xfff02400),
++	IRQ(28),
++};
++DEFINE_DEV_DATA(atmel_mci, 0);
++DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_mci0_device;
++		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
++		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
++		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
++		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
++		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
++		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++		break;
++	default:
++		return NULL;
++	}
++
++	if (data) {
++		if (data->detect_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->detect_pin, 0);
++		if (data->wp_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->wp_pin, 0);
++		memcpy(pdev->dev.platform_data, data,
++		       sizeof(struct mci_platform_data));
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
+  *  LCDC
+  * -------------------------------------------------------------------- */
+ static struct atmel_lcdfb_info atmel_lcdfb0_data;
+@@ -1013,6 +1174,228 @@ err_dup_modedb:
+ }
+ 
+ /* --------------------------------------------------------------------
++ *  USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++	{
++		.name		= "fifo",
++		.start		= 0xff300000,
++		.end		= 0xff3fffff,
++		.flags		= IORESOURCE_MEM,
++	}, {
++		.name		= "regs",
++		.start		= 0xfff03000,
++		.end		= 0xfff033ff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(31),
++};
++static struct clk usba0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 12,
++};
++static struct clk usba0_hclk = {
++	.name		= "hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_usba_udc", 0);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, usba0_resource,
++					  ARRAY_SIZE(usba0_resource)))
++		goto out_free_pdev;
++
++	if (data) {
++		if (platform_device_add_data(pdev, data, sizeof(*data)))
++			goto out_free_pdev;
++
++		if (data->vbus_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->vbus_pin, 0);
++	}
++
++	usba0_pclk.dev = &pdev->dev;
++	usba0_hclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++	PBMEM(0xffe01c00),
++	IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++	PBMEM(0xffe02000),
++	IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++	PBMEM(0xffe02400),
++	IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &ssc0_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
++		break;
++	case 1:
++		pdev = &ssc1_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
++		break;
++	case 2:
++		pdev = &ssc2_device;
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] = {
++	PBMEM(0xfff02800),
++	IRQ(29),
++};
++DEFINE_DEV(atmel_ac97c, 0);
++DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
++
++struct platform_device *__init
++at32_add_device_ac97c(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_ac97c0_device;
++		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
++		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
++		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
++		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  DAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] = {
++	PBMEM(0xfff02000),
++	IRQ(27),
++};
++DEFINE_DEV(abdac, 0);
++DEV_CLK(pclk, abdac0, pbb, 8);
++static struct clk abdac0_sample_clk = {
++	.name           = "sample_clk",
++	.dev            = &abdac0_device.dev,
++	.mode           = genclk_mode,
++	.get_rate       = genclk_get_rate,
++	.set_rate       = genclk_set_rate,
++	.set_parent     = genclk_set_parent,
++	.index          = 6,
++};
++
++struct platform_device *__init
++at32_add_device_abdac(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &abdac0_device;
++		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
++		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
++		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
++		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
+  *  GCLK
+  * -------------------------------------------------------------------- */
+ static struct clk gclk0 = {
+@@ -1066,7 +1449,7 @@ struct clk *at32_clock_list[] = {
+ 	&hsb_clk,
+ 	&pba_clk,
+ 	&pbb_clk,
+-	&at32_sm_pclk,
++	&at32_pm_pclk,
+ 	&at32_intc0_pclk,
+ 	&hmatrix_clk,
+ 	&ebi_clk,
+@@ -1075,6 +1458,7 @@ struct clk *at32_clock_list[] = {
+ 	&smc0_mck,
+ 	&pdc_hclk,
+ 	&pdc_pclk,
++	&dmaca0_hclk,
+ 	&pico_clk,
+ 	&pio0_mck,
+ 	&pio1_mck,
+@@ -1092,8 +1476,18 @@ struct clk *at32_clock_list[] = {
+ 	&macb1_pclk,
+ 	&atmel_spi0_spi_clk,
+ 	&atmel_spi1_spi_clk,
++	&atmel_twi0_pclk,
++	&atmel_mci0_mci_clk,
+ 	&atmel_lcdfb0_hck1,
+ 	&atmel_lcdfb0_pixclk,
++	&usba0_pclk,
++	&usba0_hclk,
++	&ssc0_pclk,
++	&ssc1_pclk,
++	&ssc2_pclk,
++	&atmel_ac97c0_pclk,
++	&abdac0_pclk,
++	&abdac0_sample_clk,
+ 	&gclk0,
+ 	&gclk1,
+ 	&gclk2,
+@@ -1113,18 +1507,20 @@ void __init at32_portmux_init(void)
+ 
+ void __init at32_clock_init(void)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+ 	int i;
+ 
+-	if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL))
++	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+ 		main_clock = &pll0;
+-	else
++		cpu_clk.parent = &pll0;
++	} else {
+ 		main_clock = &osc0;
++		cpu_clk.parent = &osc0;
++	}
+ 
+-	if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC))
++	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+ 		pll0.parent = &osc1;
+-	if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
++	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+ 		pll1.parent = &osc1;
+ 
+ 	genclk_init_parent(&gclk0);
+@@ -1133,6 +1529,7 @@ void __init at32_clock_init(void)
+ 	genclk_init_parent(&gclk3);
+ 	genclk_init_parent(&gclk4);
+ 	genclk_init_parent(&atmel_lcdfb0_pixclk);
++	genclk_init_parent(&abdac0_sample_clk);
+ 
+ 	/*
+ 	 * Turn on all clocks that have at least one user already, and
+@@ -1157,8 +1554,8 @@ void __init at32_clock_init(void)
+ 			pbb_mask |= 1 << clk->index;
+ 	}
+ 
+-	sm_writel(sm, PM_CPU_MASK, cpu_mask);
+-	sm_writel(sm, PM_HSB_MASK, hsb_mask);
+-	sm_writel(sm, PM_PBA_MASK, pba_mask);
+-	sm_writel(sm, PM_PBB_MASK, pbb_mask);
++	pm_writel(CPU_MASK, cpu_mask);
++	pm_writel(HSB_MASK, hsb_mask);
++	pm_writel(PBA_MASK, pba_mask);
++	pm_writel(PBB_MASK, pbb_mask);
+ }
+diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
+new file mode 100644
+index 0000000..235524b
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/cpufreq.c
+@@ -0,0 +1,112 @@
++/*
++ * Copyright (C) 2004-2007 Atmel Corporation
++ *
++ * Based on MIPS implementation arch/mips/kernel/time.c
++ *   Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/cpufreq.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <asm/system.h>
++
++static struct clk *cpuclk;
++
++static int at32_verify_speed(struct cpufreq_policy *policy)
++{
++	if (policy->cpu != 0)
++		return -EINVAL;
++
++	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
++			policy->cpuinfo.max_freq);
++	return 0;
++}
++
++static unsigned int at32_get_speed(unsigned int cpu)
++{
++	/* No SMP support */
++	if (cpu)
++		return 0;
++	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
++}
++
++static int at32_set_target(struct cpufreq_policy *policy,
++			  unsigned int target_freq,
++			  unsigned int relation)
++{
++	struct cpufreq_freqs freqs;
++	long freq;
++
++	/* Convert target_freq from kHz to Hz */
++	freq = clk_round_rate(cpuclk, target_freq * 1000);
++
++	/* Check if policy->min <= new_freq <= policy->max */
++	if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
++		return -EINVAL;
++
++	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
++
++	freqs.old = at32_get_speed(0);
++	freqs.new = (freq + 500) / 1000;
++	freqs.cpu = 0;
++	freqs.flags = 0;
++
++	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++	clk_set_rate(cpuclk, freq);
++	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
++
++	return 0;
++}
++
++static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++	if (policy->cpu != 0)
++		return -EINVAL;
++
++	cpuclk = clk_get(NULL, "cpu");
++	if (IS_ERR(cpuclk)) {
++		pr_debug("cpufreq: could not get CPU clk\n");
++		return PTR_ERR(cpuclk);
++	}
++
++	policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
++	policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
++	policy->cpuinfo.transition_latency = 0;
++	policy->cur = at32_get_speed(0);
++	policy->min = policy->cpuinfo.min_freq;
++	policy->max = policy->cpuinfo.max_freq;
++	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
++
++	printk("cpufreq: AT32AP CPU frequency driver\n");
++
++	return 0;
++}
++
++static struct cpufreq_driver at32_driver = {
++	.name		= "at32ap",
++	.owner		= THIS_MODULE,
++	.init		= at32_cpufreq_driver_init,
++	.verify		= at32_verify_speed,
++	.target		= at32_set_target,
++	.get		= at32_get_speed,
++	.flags		= CPUFREQ_STICKY,
++};
++
++static int __init at32_cpufreq_init(void)
++{
++	return cpufreq_register_driver(&at32_driver);
++}
++
++arch_initcall(at32_cpufreq_init);
+diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
+index 4a60ecc..8acd010 100644
+--- a/arch/avr32/mach-at32ap/extint.c
++++ b/arch/avr32/mach-at32ap/extint.c
+@@ -17,42 +17,83 @@
+ 
+ #include <asm/io.h>
+ 
+-#include <asm/arch/sm.h>
+-
+-#include "sm.h"
++/* EIC register offsets */
++#define EIC_IER					0x0000
++#define EIC_IDR					0x0004
++#define EIC_IMR					0x0008
++#define EIC_ISR					0x000c
++#define EIC_ICR					0x0010
++#define EIC_MODE				0x0014
++#define EIC_EDGE				0x0018
++#define EIC_LEVEL				0x001c
++#define EIC_TEST				0x0020
++#define EIC_NMIC				0x0024
++
++/* Bitfields in TEST */
++#define EIC_TESTEN_OFFSET			31
++#define EIC_TESTEN_SIZE				1
++
++/* Bitfields in NMIC */
++#define EIC_EN_OFFSET				0
++#define EIC_EN_SIZE				1
++
++/* Bit manipulation macros */
++#define EIC_BIT(name)					\
++	(1 << EIC_##name##_OFFSET)
++#define EIC_BF(name,value)				\
++	(((value) & ((1 << EIC_##name##_SIZE) - 1))	\
++	 << EIC_##name##_OFFSET)
++#define EIC_BFEXT(name,value)				\
++	(((value) >> EIC_##name##_OFFSET)		\
++	 & ((1 << EIC_##name##_SIZE) - 1))
++#define EIC_BFINS(name,value,old)			\
++	(((old) & ~(((1 << EIC_##name##_SIZE) - 1)	\
++		    << EIC_##name##_OFFSET))		\
++	 | EIC_BF(name,value))
++
++/* Register access macros */
++#define eic_readl(port,reg)				\
++	__raw_readl((port)->regs + EIC_##reg)
++#define eic_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + EIC_##reg)
++
++struct eic {
++	void __iomem *regs;
++	struct irq_chip *chip;
++	unsigned int first_irq;
++};
+ 
+-static void eim_ack_irq(unsigned int irq)
++static void eic_ack_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
+ }
+ 
+-static void eim_mask_irq(unsigned int irq)
++static void eic_mask_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+ 
+-static void eim_mask_ack_irq(unsigned int irq)
++static void eic_mask_ack_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
+-	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
++	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+ 
+-static void eim_unmask_irq(unsigned int irq)
++static void eic_unmask_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, IER, 1 << (irq - eic->first_irq));
+ }
+ 
+-static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
++static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
++	struct eic *eic = get_irq_chip_data(irq);
+ 	struct irq_desc *desc;
+-	unsigned int i = irq - sm->eim_first_irq;
++	unsigned int i = irq - eic->first_irq;
+ 	u32 mode, edge, level;
+-	unsigned long flags;
+ 	int ret = 0;
+ 
+ 	flow_type &= IRQ_TYPE_SENSE_MASK;
+@@ -60,11 +101,10 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
+ 		flow_type = IRQ_TYPE_LEVEL_LOW;
+ 
+ 	desc = &irq_desc[irq];
+-	spin_lock_irqsave(&sm->lock, flags);
+ 
+-	mode = sm_readl(sm, EIM_MODE);
+-	edge = sm_readl(sm, EIM_EDGE);
+-	level = sm_readl(sm, EIM_LEVEL);
++	mode = eic_readl(eic, MODE);
++	edge = eic_readl(eic, EDGE);
++	level = eic_readl(eic, LEVEL);
+ 
+ 	switch (flow_type) {
+ 	case IRQ_TYPE_LEVEL_LOW:
+@@ -89,9 +129,9 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
+ 	}
+ 
+ 	if (ret == 0) {
+-		sm_writel(sm, EIM_MODE, mode);
+-		sm_writel(sm, EIM_EDGE, edge);
+-		sm_writel(sm, EIM_LEVEL, level);
++		eic_writel(eic, MODE, mode);
++		eic_writel(eic, EDGE, edge);
++		eic_writel(eic, LEVEL, level);
+ 
+ 		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ 			flow_type |= IRQ_LEVEL;
+@@ -99,35 +139,33 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
+ 		desc->status |= flow_type;
+ 	}
+ 
+-	spin_unlock_irqrestore(&sm->lock, flags);
+-
+ 	return ret;
+ }
+ 
+-struct irq_chip eim_chip = {
+-	.name		= "eim",
+-	.ack		= eim_ack_irq,
+-	.mask		= eim_mask_irq,
+-	.mask_ack	= eim_mask_ack_irq,
+-	.unmask		= eim_unmask_irq,
+-	.set_type	= eim_set_irq_type,
++struct irq_chip eic_chip = {
++	.name		= "eic",
++	.ack		= eic_ack_irq,
++	.mask		= eic_mask_irq,
++	.mask_ack	= eic_mask_ack_irq,
++	.unmask		= eic_unmask_irq,
++	.set_type	= eic_set_irq_type,
+ };
+ 
+-static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
++static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+-	struct at32_sm *sm = desc->handler_data;
++	struct eic *eic = desc->handler_data;
+ 	struct irq_desc *ext_desc;
+ 	unsigned long status, pending;
+ 	unsigned int i, ext_irq;
+ 
+-	status = sm_readl(sm, EIM_ISR);
+-	pending = status & sm_readl(sm, EIM_IMR);
++	status = eic_readl(eic, ISR);
++	pending = status & eic_readl(eic, IMR);
+ 
+ 	while (pending) {
+ 		i = fls(pending) - 1;
+ 		pending &= ~(1 << i);
+ 
+-		ext_irq = i + sm->eim_first_irq;
++		ext_irq = i + eic->first_irq;
+ 		ext_desc = irq_desc + ext_irq;
+ 		if (ext_desc->status & IRQ_LEVEL)
+ 			handle_level_irq(ext_irq, ext_desc);
+@@ -136,51 +174,85 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
+ 	}
+ }
+ 
+-static int __init eim_init(void)
++static int __init eic_probe(struct platform_device *pdev)
+ {
+-	struct at32_sm *sm = &system_manager;
++	struct eic *eic;
++	struct resource *regs;
+ 	unsigned int i;
+ 	unsigned int nr_irqs;
+ 	unsigned int int_irq;
++	int ret;
+ 	u32 pattern;
+ 
+-	/*
+-	 * The EIM is really the same module as SM, so register
+-	 * mapping, etc. has been taken care of already.
+-	 */
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int_irq = platform_get_irq(pdev, 0);
++	if (!regs || !int_irq) {
++		dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
++		return -ENXIO;
++	}
++
++	ret = -ENOMEM;
++	eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
++	if (!eic) {
++		dev_dbg(&pdev->dev, "no memory for eic structure\n");
++		goto err_kzalloc;
++	}
++
++	eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
++	eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!eic->regs) {
++		dev_dbg(&pdev->dev, "failed to map regs\n");
++		goto err_ioremap;
++	}
+ 
+ 	/*
+ 	 * Find out how many interrupt lines that are actually
+ 	 * implemented in hardware.
+ 	 */
+-	sm_writel(sm, EIM_IDR, ~0UL);
+-	sm_writel(sm, EIM_MODE, ~0UL);
+-	pattern = sm_readl(sm, EIM_MODE);
++	eic_writel(eic, IDR, ~0UL);
++	eic_writel(eic, MODE, ~0UL);
++	pattern = eic_readl(eic, MODE);
+ 	nr_irqs = fls(pattern);
+ 
+ 	/* Trigger on falling edge unless overridden by driver */
+-	sm_writel(sm, EIM_MODE, 0UL);
+-	sm_writel(sm, EIM_EDGE, 0UL);
++	eic_writel(eic, MODE, 0UL);
++	eic_writel(eic, EDGE, 0UL);
+ 
+-	sm->eim_chip = &eim_chip;
++	eic->chip = &eic_chip;
+ 
+ 	for (i = 0; i < nr_irqs; i++) {
+ 		/* NOTE the handler we set here is ignored by the demux */
+-		set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
++		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ 					 handle_level_irq);
+-		set_irq_chip_data(sm->eim_first_irq + i, sm);
++		set_irq_chip_data(eic->first_irq + i, eic);
+ 	}
+ 
+-	int_irq = platform_get_irq_byname(sm->pdev, "eim");
+-
+-	set_irq_chained_handler(int_irq, demux_eim_irq);
+-	set_irq_data(int_irq, sm);
++	set_irq_chained_handler(int_irq, demux_eic_irq);
++	set_irq_data(int_irq, eic);
+ 
+-	printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
+-	       sm->regs, int_irq);
+-	printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
+-	       nr_irqs, sm->eim_first_irq);
++	dev_info(&pdev->dev,
++		 "External Interrupt Controller at 0x%p, IRQ %u\n",
++		 eic->regs, int_irq);
++	dev_info(&pdev->dev,
++		 "Handling %u external IRQs, starting with IRQ %u\n",
++		 nr_irqs, eic->first_irq);
+ 
+ 	return 0;
++
++err_ioremap:
++	kfree(eic);
++err_kzalloc:
++	return ret;
++}
++
++static struct platform_driver eic_driver = {
++	.driver = {
++		.name = "at32_eic",
++	},
++};
++
++static int __init eic_init(void)
++{
++	return platform_driver_probe(&eic_driver, eic_probe);
+ }
+-arch_initcall(eim_init);
++arch_initcall(eic_init);
+diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
+new file mode 100644
+index 0000000..3d4810d
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-dev.c
+@@ -0,0 +1,570 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX			8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++	spinlock_t lock;
++
++	int enabled;
++	int initialized;
++	int port;
++	u32 pin_mask;
++	u32 oe_mask;
++
++	/* Pin state last time we read it (for blocking reads) */
++	u32 pin_state;
++	int changed;
++
++	wait_queue_head_t change_wq;
++	struct fasync_struct *async_queue;
++
++	int id;
++	struct class_device *gpio_dev;
++	struct cdev char_dev;
++	struct config_item item;
++};
++
++struct gpio_attribute {
++	struct configfs_attribute attr;
++	ssize_t (*show)(struct gpio_item *, char *);
++	ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++	struct gpio_item *gpio = dev_id;
++	u32 old_state, new_state;
++
++	old_state = gpio->pin_state;
++	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++	gpio->pin_state = new_state;
++
++	if (new_state != old_state) {
++		gpio->changed = 1;
++		wake_up_interruptible(&gpio->change_wq);
++
++		if (gpio->async_queue)
++			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = container_of(inode->i_cdev,
++					      struct gpio_item,
++					      char_dev);
++	unsigned int irq;
++	unsigned int i;
++	int ret;
++
++	nonseekable_open(inode, file);
++	config_item_get(&gpio->item);
++	file->private_data = gpio;
++
++	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++						       gpio->pin_mask);
++	gpio->changed = 1;
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			ret = request_irq(irq, gpio_dev_interrupt, 0,
++					  "gpio-dev", gpio);
++			if (ret)
++				goto err_irq;
++		}
++	}
++
++	return 0;
++
++err_irq:
++	while (i--) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++	struct gpio_item *gpio = file->private_data;
++
++	return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int irq;
++	unsigned int i;
++
++	gpio_dev_fasync(-1, file, 0);
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int mask = 0;
++
++	poll_wait(file, &gpio->change_wq, wait);
++	if (gpio->changed)
++		mask |= POLLIN | POLLRDNORM;
++
++	return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++			     size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value;
++
++	spin_lock_irq(&gpio->lock);
++	while (!gpio->changed) {
++		spin_unlock_irq(&gpio->lock);
++
++		if (file->f_flags & O_NONBLOCK)
++			return -EAGAIN;
++
++		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++			return -ERESTARTSYS;
++
++		spin_lock_irq(&gpio->lock);
++	}
++
++	gpio->changed = 0;
++	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++
++	spin_unlock_irq(&gpio->lock);
++
++	count = min(count, (size_t)4);
++	if (copy_to_user(buf, &value, count))
++		return -EFAULT;
++
++	return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++			      size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value = 0;
++	u32 mask = ~0UL;
++
++	count = min(count, (size_t)4);
++	if (copy_from_user(&value, buf, count))
++		return -EFAULT;
++
++	/* Assuming big endian */
++	mask <<= (4 - count) * 8;
++	mask &= gpio->pin_mask;
++
++	at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++	return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.open		= gpio_dev_open,
++	.release	= gpio_dev_release,
++	.fasync		= gpio_dev_fasync,
++	.poll		= gpio_dev_poll,
++	.read		= gpio_dev_read,
++	.write		= gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++	return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->port);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	unsigned long id;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	id = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Switching PIO is not allowed when live... */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		ret = -ENXIO;
++		if (at32_gpio_port_is_valid(id)) {
++			gpio->port = id;
++			ret = count;
++		}
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++				   const char *page, size_t count)
++{
++	u32 new_mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	new_mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Can't update the pin mask while live. */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask &= new_mask;
++		gpio->pin_mask = new_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	u32 mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask = mask & gpio->pin_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	char *p = (char *)page;
++	int enabled;
++	int ret;
++
++	enabled = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* make it a boolean value */
++	enabled = !!enabled;
++
++	if (gpio->enabled == enabled)
++		/* No change; do nothing. */
++		return count;
++
++	BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++	if (!enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++	} else {
++		if (gpio->port < 0 || !gpio->pin_mask)
++			return -ENODEV;
++	}
++
++	/* Disallow any updates to gpio_id or pin_mask */
++	spin_lock(&gpio->lock);
++	gpio->enabled = enabled;
++	spin_unlock(&gpio->lock);
++
++	if (!enabled)
++		return count;
++
++	/* Now, try to allocate the pins */
++	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++	if (ret)
++		goto err_alloc_pins;
++
++	gpio->initialized = 1;
++
++	cdev_init(&gpio->char_dev, &gpio_dev_fops);
++	gpio->char_dev.owner = THIS_MODULE;
++	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++	if (ret < 0)
++		goto err_cdev_add;
++	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++					     MKDEV(MAJOR(gpio_devt), gpio->id),
++					     NULL,
++					     "gpio%d", gpio->id);
++	if (IS_ERR(gpio->gpio_dev)) {
++		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++		ret = PTR_ERR(gpio->gpio_dev);
++		goto err_class_dev;
++	}
++
++	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++	       gpio->id, gpio->port, gpio->pin_mask,
++	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++	return 0;
++
++err_class_dev:
++	cdev_del(&gpio->char_dev);
++err_cdev_add:
++	at32_deselect_pins(gpio->port, gpio->pin_mask);
++	gpio->initialized = 0;
++err_alloc_pins:
++	spin_lock(&gpio->lock);
++	gpio->enabled = 0;
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "gpio_id",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_gpio_id,
++	.store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "pin_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_pin_mask,
++	.store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "oe_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_oe_mask,
++	.store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "enabled",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_enabled,
++	.store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++	&gpio_item_attr_gpio_id.attr,
++	&gpio_item_attr_pin_mask.attr,
++	&gpio_item_attr_oe_mask.attr,
++	&gpio_item_attr_enabled.attr,
++	NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++			      struct configfs_attribute *attr,
++			      char *page)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = 0;
++
++	if (gpio_attr->show)
++		ret = gpio_attr->show(gpio_item, page);
++	return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++			       struct configfs_attribute *attr,
++			       const char *page, size_t count)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = -EINVAL;
++
++	if (gpio_attr->store)
++		ret = gpio_attr->store(gpio_item, page, count);
++	return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++	kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++	.release		= gpio_release,
++	.show_attribute		= gpio_show_attr,
++	.store_attribute	= gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++	.ct_item_ops	= &gpio_item_ops,
++	.ct_attrs	= gpio_item_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++					  const char *name)
++{
++	static int next_id;
++	struct gpio_item *gpio;
++
++	if (next_id >= GPIO_DEV_MAX)
++		return NULL;
++
++	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++	if (!gpio)
++		return NULL;
++
++	gpio->id = next_id++;
++	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++	spin_lock_init(&gpio->lock);
++	init_waitqueue_head(&gpio->change_wq);
++
++	return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++			   struct config_item *item)
++{
++	struct gpio_item *gpio = to_gpio_item(item);
++
++	spin_lock(&gpio->lock);
++	if (gpio->enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++	}
++
++	if (gpio->initialized) {
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++		gpio->enabled = 0;
++	}
++	spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++	.make_item	= gpio_make_item,
++	.drop_item	= gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++	.ct_group_ops	= &gpio_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++	.su_group = {
++		.cg_item = {
++			 .ci_namebuf = "gpio",
++			 .ci_type = &gpio_group_type,
++		 },
++	},
++};
++
++static int __init gpio_dev_init(void)
++{
++	int err;
++
++	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++	if (IS_ERR(gpio_dev_class)) {
++		err = PTR_ERR(gpio_dev_class);
++		goto err_class_create;
++	}
++
++	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++	if (err < 0)
++		goto err_alloc_chrdev;
++
++	/* Configfs initialization */
++	config_group_init(&gpio_subsys.su_group);
++	init_MUTEX(&gpio_subsys.su_sem);
++	err = configfs_register_subsystem(&gpio_subsys);
++	if (err)
++		goto err_register_subsys;
++
++	return 0;
++
++err_register_subsys:
++	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++	class_destroy(gpio_dev_class);
++err_class_create:
++	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++	return err;
++}
++late_initcall(gpio_dev_init);
+diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
+index 1eb99b8..153bb9a 100644
+--- a/arch/avr32/mach-at32ap/pio.c
++++ b/arch/avr32/mach-at32ap/pio.c
+@@ -158,6 +158,82 @@ fail:
+ 	dump_stack();
+ }
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++	/* Try to allocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		if (old & pins)
++			return -EBUSY;
++
++		new = old | pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++	/* That went well, now configure the port */
++	pio_writel(pio, OER, oe_mask);
++	pio_writel(pio, PER, pins);
++
++	return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* Return to a "safe" mux configuration */
++	pio_writel(pio, PUER, pins);
++	pio_writel(pio, ODR, pins);
++
++	/* Deallocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		new = old & ~pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* No atomic updates for now... */
++	pio_writel(pio, CODR, ~value & mask);
++	pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+ 
+ /* GPIO API */
+diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
+new file mode 100644
+index 0000000..a1f8ace
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/pm.h
+@@ -0,0 +1,112 @@
++/*
++ * Register definitions for the Power Manager (PM)
++ */
++#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
++#define __ARCH_AVR32_MACH_AT32AP_PM_H__
++
++/* PM register offsets */
++#define PM_MCCTRL				0x0000
++#define PM_CKSEL				0x0004
++#define PM_CPU_MASK				0x0008
++#define PM_HSB_MASK				0x000c
++#define PM_PBA_MASK				0x0010
++#define PM_PBB_MASK				0x0014
++#define PM_PLL0					0x0020
++#define PM_PLL1					0x0024
++#define PM_IER					0x0040
++#define PM_IDR					0x0044
++#define PM_IMR					0x0048
++#define PM_ISR					0x004c
++#define PM_ICR					0x0050
++#define PM_GCCTRL(x)				(0x0060 + 4 * (x))
++#define PM_RCAUSE				0x00c0
++
++/* Bitfields in CKSEL */
++#define PM_CPUSEL_OFFSET			0
++#define PM_CPUSEL_SIZE				3
++#define PM_CPUDIV_OFFSET			7
++#define PM_CPUDIV_SIZE				1
++#define PM_HSBSEL_OFFSET			8
++#define PM_HSBSEL_SIZE				3
++#define PM_HSBDIV_OFFSET			15
++#define PM_HSBDIV_SIZE				1
++#define PM_PBASEL_OFFSET			16
++#define PM_PBASEL_SIZE				3
++#define PM_PBADIV_OFFSET			23
++#define PM_PBADIV_SIZE				1
++#define PM_PBBSEL_OFFSET			24
++#define PM_PBBSEL_SIZE				3
++#define PM_PBBDIV_OFFSET			31
++#define PM_PBBDIV_SIZE				1
++
++/* Bitfields in PLL0 */
++#define PM_PLLEN_OFFSET				0
++#define PM_PLLEN_SIZE				1
++#define PM_PLLOSC_OFFSET			1
++#define PM_PLLOSC_SIZE				1
++#define PM_PLLOPT_OFFSET			2
++#define PM_PLLOPT_SIZE				3
++#define PM_PLLDIV_OFFSET			8
++#define PM_PLLDIV_SIZE				8
++#define PM_PLLMUL_OFFSET			16
++#define PM_PLLMUL_SIZE				8
++#define PM_PLLCOUNT_OFFSET			24
++#define PM_PLLCOUNT_SIZE			6
++#define PM_PLLTEST_OFFSET			31
++#define PM_PLLTEST_SIZE				1
++
++/* Bitfields in ICR */
++#define PM_LOCK0_OFFSET				0
++#define PM_LOCK0_SIZE				1
++#define PM_LOCK1_OFFSET				1
++#define PM_LOCK1_SIZE				1
++#define PM_WAKE_OFFSET				2
++#define PM_WAKE_SIZE				1
++#define PM_CKRDY_OFFSET				5
++#define PM_CKRDY_SIZE				1
++#define PM_MSKRDY_OFFSET			6
++#define PM_MSKRDY_SIZE				1
++
++/* Bitfields in GCCTRL0 */
++#define PM_OSCSEL_OFFSET			0
++#define PM_OSCSEL_SIZE				1
++#define PM_PLLSEL_OFFSET			1
++#define PM_PLLSEL_SIZE				1
++#define PM_CEN_OFFSET				2
++#define PM_CEN_SIZE				1
++#define PM_DIVEN_OFFSET				4
++#define PM_DIVEN_SIZE				1
++#define PM_DIV_OFFSET				8
++#define PM_DIV_SIZE				8
++
++/* Bitfields in RCAUSE */
++#define PM_POR_OFFSET				0
++#define PM_POR_SIZE				1
++#define PM_EXT_OFFSET				2
++#define PM_EXT_SIZE				1
++#define PM_WDT_OFFSET				3
++#define PM_WDT_SIZE				1
++#define PM_NTAE_OFFSET				4
++#define PM_NTAE_SIZE				1
++
++/* Bit manipulation macros */
++#define PM_BIT(name)					\
++	(1 << PM_##name##_OFFSET)
++#define PM_BF(name,value)				\
++	(((value) & ((1 << PM_##name##_SIZE) - 1))	\
++	 << PM_##name##_OFFSET)
++#define PM_BFEXT(name,value)				\
++	(((value) >> PM_##name##_OFFSET)		\
++	 & ((1 << PM_##name##_SIZE) - 1))
++#define PM_BFINS(name,value,old)\
++	(((old) & ~(((1 << PM_##name##_SIZE) - 1)	\
++		    << PM_##name##_OFFSET))		\
++	 | PM_BF(name,value))
++
++/* Register access macros */
++#define pm_readl(reg)							\
++	__raw_readl((void __iomem *)AT32_PM_BASE + PM_##reg)
++#define pm_writel(reg,value)						\
++	__raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
++
++#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
+diff --git a/arch/avr32/mach-at32ap/sm.h b/arch/avr32/mach-at32ap/sm.h
+deleted file mode 100644
+index cad02b5..0000000
+--- a/arch/avr32/mach-at32ap/sm.h
++++ /dev/null
+@@ -1,242 +0,0 @@
+-/*
+- * Register definitions for SM
+- *
+- * System Manager
+- */
+-#ifndef __ASM_AVR32_SM_H__
+-#define __ASM_AVR32_SM_H__
+-
+-/* SM register offsets */
+-#define SM_PM_MCCTRL                            0x0000
+-#define SM_PM_CKSEL                             0x0004
+-#define SM_PM_CPU_MASK                          0x0008
+-#define SM_PM_HSB_MASK                          0x000c
+-#define SM_PM_PBA_MASK                         0x0010
+-#define SM_PM_PBB_MASK                         0x0014
+-#define SM_PM_PLL0                              0x0020
+-#define SM_PM_PLL1                              0x0024
+-#define SM_PM_VCTRL                             0x0030
+-#define SM_PM_VMREF                             0x0034
+-#define SM_PM_VMV                               0x0038
+-#define SM_PM_IER                               0x0040
+-#define SM_PM_IDR                               0x0044
+-#define SM_PM_IMR                               0x0048
+-#define SM_PM_ISR                               0x004c
+-#define SM_PM_ICR                               0x0050
+-#define SM_PM_GCCTRL                            0x0060
+-#define SM_RTC_CTRL                             0x0080
+-#define SM_RTC_VAL                              0x0084
+-#define SM_RTC_TOP                              0x0088
+-#define SM_RTC_IER                              0x0090
+-#define SM_RTC_IDR                              0x0094
+-#define SM_RTC_IMR                              0x0098
+-#define SM_RTC_ISR                              0x009c
+-#define SM_RTC_ICR                              0x00a0
+-#define SM_WDT_CTRL                             0x00b0
+-#define SM_WDT_CLR                              0x00b4
+-#define SM_WDT_EXT                              0x00b8
+-#define SM_RC_RCAUSE                            0x00c0
+-#define SM_EIM_IER                              0x0100
+-#define SM_EIM_IDR                              0x0104
+-#define SM_EIM_IMR                              0x0108
+-#define SM_EIM_ISR                              0x010c
+-#define SM_EIM_ICR                              0x0110
+-#define SM_EIM_MODE                             0x0114
+-#define SM_EIM_EDGE                             0x0118
+-#define SM_EIM_LEVEL                            0x011c
+-#define SM_EIM_TEST                             0x0120
+-#define SM_EIM_NMIC                             0x0124
+-
+-/* Bitfields in PM_MCCTRL */
+-
+-/* Bitfields in PM_CKSEL */
+-#define SM_CPUSEL_OFFSET                        0
+-#define SM_CPUSEL_SIZE                          3
+-#define SM_CPUDIV_OFFSET                        7
+-#define SM_CPUDIV_SIZE                          1
+-#define SM_HSBSEL_OFFSET                        8
+-#define SM_HSBSEL_SIZE                          3
+-#define SM_HSBDIV_OFFSET                        15
+-#define SM_HSBDIV_SIZE                          1
+-#define SM_PBASEL_OFFSET                       16
+-#define SM_PBASEL_SIZE                         3
+-#define SM_PBADIV_OFFSET                       23
+-#define SM_PBADIV_SIZE                         1
+-#define SM_PBBSEL_OFFSET                       24
+-#define SM_PBBSEL_SIZE                         3
+-#define SM_PBBDIV_OFFSET                       31
+-#define SM_PBBDIV_SIZE                         1
+-
+-/* Bitfields in PM_CPU_MASK */
+-
+-/* Bitfields in PM_HSB_MASK */
+-
+-/* Bitfields in PM_PBA_MASK */
+-
+-/* Bitfields in PM_PBB_MASK */
+-
+-/* Bitfields in PM_PLL0 */
+-#define SM_PLLEN_OFFSET                         0
+-#define SM_PLLEN_SIZE                           1
+-#define SM_PLLOSC_OFFSET                        1
+-#define SM_PLLOSC_SIZE                          1
+-#define SM_PLLOPT_OFFSET                        2
+-#define SM_PLLOPT_SIZE                          3
+-#define SM_PLLDIV_OFFSET                        8
+-#define SM_PLLDIV_SIZE                          8
+-#define SM_PLLMUL_OFFSET                        16
+-#define SM_PLLMUL_SIZE                          8
+-#define SM_PLLCOUNT_OFFSET                      24
+-#define SM_PLLCOUNT_SIZE                        6
+-#define SM_PLLTEST_OFFSET                       31
+-#define SM_PLLTEST_SIZE                         1
+-
+-/* Bitfields in PM_PLL1 */
+-
+-/* Bitfields in PM_VCTRL */
+-#define SM_VAUTO_OFFSET                         0
+-#define SM_VAUTO_SIZE                           1
+-#define SM_PM_VCTRL_VAL_OFFSET                  8
+-#define SM_PM_VCTRL_VAL_SIZE                    7
+-
+-/* Bitfields in PM_VMREF */
+-#define SM_REFSEL_OFFSET                        0
+-#define SM_REFSEL_SIZE                          4
+-
+-/* Bitfields in PM_VMV */
+-#define SM_PM_VMV_VAL_OFFSET                    0
+-#define SM_PM_VMV_VAL_SIZE                      8
+-
+-/* Bitfields in PM_IER */
+-
+-/* Bitfields in PM_IDR */
+-
+-/* Bitfields in PM_IMR */
+-
+-/* Bitfields in PM_ISR */
+-
+-/* Bitfields in PM_ICR */
+-#define SM_LOCK0_OFFSET                         0
+-#define SM_LOCK0_SIZE                           1
+-#define SM_LOCK1_OFFSET                         1
+-#define SM_LOCK1_SIZE                           1
+-#define SM_WAKE_OFFSET                          2
+-#define SM_WAKE_SIZE                            1
+-#define SM_VOK_OFFSET                           3
+-#define SM_VOK_SIZE                             1
+-#define SM_VMRDY_OFFSET                         4
+-#define SM_VMRDY_SIZE                           1
+-#define SM_CKRDY_OFFSET                         5
+-#define SM_CKRDY_SIZE                           1
+-
+-/* Bitfields in PM_GCCTRL */
+-#define SM_OSCSEL_OFFSET                        0
+-#define SM_OSCSEL_SIZE                          1
+-#define SM_PLLSEL_OFFSET                        1
+-#define SM_PLLSEL_SIZE                          1
+-#define SM_CEN_OFFSET                           2
+-#define SM_CEN_SIZE                             1
+-#define SM_CPC_OFFSET                           3
+-#define SM_CPC_SIZE                             1
+-#define SM_DIVEN_OFFSET                         4
+-#define SM_DIVEN_SIZE                           1
+-#define SM_DIV_OFFSET                           8
+-#define SM_DIV_SIZE                             8
+-
+-/* Bitfields in RTC_CTRL */
+-#define SM_PCLR_OFFSET                          1
+-#define SM_PCLR_SIZE                            1
+-#define SM_TOPEN_OFFSET                         2
+-#define SM_TOPEN_SIZE                           1
+-#define SM_CLKEN_OFFSET                         3
+-#define SM_CLKEN_SIZE                           1
+-#define SM_PSEL_OFFSET                          8
+-#define SM_PSEL_SIZE                            16
+-
+-/* Bitfields in RTC_VAL */
+-#define SM_RTC_VAL_VAL_OFFSET                   0
+-#define SM_RTC_VAL_VAL_SIZE                     31
+-
+-/* Bitfields in RTC_TOP */
+-#define SM_RTC_TOP_VAL_OFFSET                   0
+-#define SM_RTC_TOP_VAL_SIZE                     32
+-
+-/* Bitfields in RTC_IER */
+-
+-/* Bitfields in RTC_IDR */
+-
+-/* Bitfields in RTC_IMR */
+-
+-/* Bitfields in RTC_ISR */
+-
+-/* Bitfields in RTC_ICR */
+-#define SM_TOPI_OFFSET                          0
+-#define SM_TOPI_SIZE                            1
+-
+-/* Bitfields in WDT_CTRL */
+-#define SM_KEY_OFFSET                           24
+-#define SM_KEY_SIZE                             8
+-
+-/* Bitfields in WDT_CLR */
+-
+-/* Bitfields in WDT_EXT */
+-
+-/* Bitfields in RC_RCAUSE */
+-#define SM_POR_OFFSET                           0
+-#define SM_POR_SIZE                             1
+-#define SM_BOD_OFFSET                           1
+-#define SM_BOD_SIZE                             1
+-#define SM_EXT_OFFSET                           2
+-#define SM_EXT_SIZE                             1
+-#define SM_WDT_OFFSET                           3
+-#define SM_WDT_SIZE                             1
+-#define SM_NTAE_OFFSET                          4
+-#define SM_NTAE_SIZE                            1
+-#define SM_SERP_OFFSET                          5
+-#define SM_SERP_SIZE                            1
+-
+-/* Bitfields in EIM_IER */
+-
+-/* Bitfields in EIM_IDR */
+-
+-/* Bitfields in EIM_IMR */
+-
+-/* Bitfields in EIM_ISR */
+-
+-/* Bitfields in EIM_ICR */
+-
+-/* Bitfields in EIM_MODE */
+-
+-/* Bitfields in EIM_EDGE */
+-#define SM_INT0_OFFSET                          0
+-#define SM_INT0_SIZE                            1
+-#define SM_INT1_OFFSET                          1
+-#define SM_INT1_SIZE                            1
+-#define SM_INT2_OFFSET                          2
+-#define SM_INT2_SIZE                            1
+-#define SM_INT3_OFFSET                          3
+-#define SM_INT3_SIZE                            1
+-
+-/* Bitfields in EIM_LEVEL */
+-
+-/* Bitfields in EIM_TEST */
+-#define SM_TESTEN_OFFSET                        31
+-#define SM_TESTEN_SIZE                          1
+-
+-/* Bitfields in EIM_NMIC */
+-#define SM_EN_OFFSET                            0
+-#define SM_EN_SIZE                              1
+-
+-/* Bit manipulation macros */
+-#define SM_BIT(name)                            (1 << SM_##name##_OFFSET)
+-#define SM_BF(name,value)                       (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET)
+-#define SM_BFEXT(name,value)                    (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1))
+-#define SM_BFINS(name,value,old)                (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
+-
+-/* Register access macros */
+-#define sm_readl(port,reg)					\
+-	__raw_readl((port)->regs + SM_##reg)
+-#define sm_writel(port,reg,value)				\
+-	__raw_writel((value), (port)->regs + SM_##reg)
+-
+-#endif /* __ASM_AVR32_SM_H__ */
+diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
+index 099212d..26f29c6 100644
+--- a/arch/avr32/mm/dma-coherent.c
++++ b/arch/avr32/mm/dma-coherent.c
+@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
+ 	struct page *page, *free, *end;
+ 	int order;
+ 
++	/* Following is a work-around (a.k.a. hack) to prevent pages
++	 * with __GFP_COMP being passed to split_page() which cannot
++	 * handle them.  The real problem is that this flag probably
++	 * should be 0 on AVR32 as it is not supported on this
++	 * platform--see CONFIG_HUGETLB_PAGE. */
++	gfp &= ~(__GFP_COMP);
++
+ 	size = PAGE_ALIGN(size);
+ 	order = get_order(size);
+ 
+diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
+index 53f5538..520afb8 100644
+--- a/drivers/char/watchdog/Kconfig
++++ b/drivers/char/watchdog/Kconfig
+@@ -187,6 +187,26 @@ config PNX4008_WATCHDOG
+ 
+ 	  Say N if you are unsure.
+ 
++# AVR32 Architecture
++
++config AT32AP700X_WDT
++	tristate "AT32AP700x watchdog"
++	depends on WATCHDOG && CPU_AT32AP7000
++	help
++	  Watchdog timer embedded into AT32AP700x devices. This will reboot
++	  your system when the timeout is reached.
++
++config AT32AP700X_WDT_TIMEOUT
++	int "Timeout value for AT32AP700x watchdog"
++	depends on AT32AP700X_WDT
++	default "2"
++	range 1 2
++	help
++	  Sets the timeout value for the watchdog in AT32AP700x devices.
++	  Limited by hardware to be 1 or 2 seconds.
++
++	  Set to 2 seconds by default.
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ 
+ config ACQUIRE_WDT
+diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
+index d90f649..3907ec0 100644
+--- a/drivers/char/watchdog/Makefile
++++ b/drivers/char/watchdog/Makefile
+@@ -36,6 +36,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+ 
++# AVR32 Architecture
++obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
+new file mode 100644
+index 0000000..9b598d9
+--- /dev/null
++++ b/drivers/char/watchdog/at32ap700x_wdt.c
+@@ -0,0 +1,325 @@
++/*
++ * Watchdog driver for Atmel AT32AP700X devices
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/watchdog.h>
++#include <linux/uaccess.h>
++#include <linux/io.h>
++
++#define TIMEOUT_MIN		1
++#define TIMEOUT_DEFAULT		CONFIG_AT32AP700X_WDT_TIMEOUT
++#define TIMEOUT_MAX		2
++
++/* Watchdog registers and write/read macro */
++#define	WDT_CTRL		0x00
++#define WDT_CTRL_EN		   0
++#define WDT_CTRL_PSEL		   8
++#define WDT_CTRL_KEY		  24
++
++#define WDT_CLR			0x04
++
++#define WDT_BIT(name)		(1 << WDT_##name)
++#define WDT_BF(name,value)	((value) << WDT_##name)
++
++#define wdt_readl(dev,reg)				\
++	__raw_readl((dev)->regs + WDT_##reg)
++#define wdt_writel(dev,reg,value)			\
++	__raw_writel((value), (dev)->regs + WDT_##reg)
++
++struct wdt_at32ap700x {
++	void __iomem		*regs;
++	int			timeout;
++	int			users;
++	struct miscdevice	miscdev;
++};
++
++static struct wdt_at32ap700x *wdt;
++
++/*
++ * Disable the watchdog.
++ */
++static void inline at32_wdt_stop(void)
++{
++	unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
++	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
++	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Enable and reset the watchdog.
++ */
++static void inline at32_wdt_start(void)
++{
++	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
++	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++
++	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++			| WDT_BF(CTRL_PSEL, psel)
++			| WDT_BF(CTRL_KEY, 0x55));
++	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++			| WDT_BF(CTRL_PSEL, psel)
++			| WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Pat the watchdog timer.
++ */
++static void inline at32_wdt_pat(void)
++{
++	wdt_writel(wdt, CLR, 0x42);
++}
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at32_wdt_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(1, &wdt->users))
++		return -EBUSY;
++
++	at32_wdt_start();
++	return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
++ * the watchdog is also disabled.
++ */
++static int at32_wdt_close(struct inode *inode, struct file *file)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++	at32_wdt_stop();
++#endif
++	clear_bit(1, &wdt->users);
++	return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at32_wdt_settimeout(int time)
++{
++	/*
++	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
++	 * 2 ^ 16 allowing up to 2 seconds timeout.
++	 */
++	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++		return -EINVAL;
++
++	/*
++	 * Set new watchdog time. It will be used when at32_wdt_start() is
++	 * called.
++	 */
++	wdt->timeout = time;
++	return 0;
++}
++
++static struct watchdog_info at32_wdt_info = {
++	.identity	= "at32ap700x watchdog",
++	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static int at32_wdt_ioctl(struct inode *inode, struct file *file,
++		unsigned int cmd, unsigned long arg)
++{
++	int ret = -ENOTTY;
++	int time;
++	void __user *argp = (void __user *)arg;
++	int __user *p = argp;
++
++	switch (cmd) {
++	case WDIOC_KEEPALIVE:
++		at32_wdt_pat();
++		ret = 0;
++		break;
++	case WDIOC_GETSUPPORT:
++		ret = copy_to_user(argp, &at32_wdt_info,
++				sizeof(at32_wdt_info)) ? -EFAULT : 0;
++		break;
++	case WDIOC_SETTIMEOUT:
++		ret = get_user(time, p);
++		if (ret)
++			break;
++		ret = at32_wdt_settimeout(time);
++		if (ret)
++			break;
++		/* Enable new time value */
++		at32_wdt_start();
++		/* fall through */
++	case WDIOC_GETTIMEOUT:
++		ret = put_user(wdt->timeout, p);
++		break;
++	case WDIOC_GETSTATUS: /* fall through */
++	case WDIOC_GETBOOTSTATUS:
++		ret = put_user(0, p);
++		break;
++	case WDIOC_SETOPTIONS:
++		ret = get_user(time, p);
++		if (ret)
++			break;
++		if (time & WDIOS_DISABLECARD)
++			at32_wdt_stop();
++		if (time & WDIOS_ENABLECARD)
++			at32_wdt_start();
++		ret = 0;
++		break;
++	}
++
++	return ret;
++}
++
++static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
++				loff_t *ppos)
++{
++	at32_wdt_pat();
++	return len;
++}
++
++static const struct file_operations at32_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.ioctl		= at32_wdt_ioctl,
++	.open		= at32_wdt_open,
++	.release	= at32_wdt_close,
++	.write		= at32_wdt_write,
++};
++
++static int __init at32_wdt_probe(struct platform_device *pdev)
++{
++	struct resource	*regs;
++	int ret;
++
++	if (wdt) {
++		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
++		return -EBUSY;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "missing mmio resource\n");
++		return -ENXIO;
++	}
++
++	wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
++	if (!wdt) {
++		dev_dbg(&pdev->dev, "no memory for wdt structure\n");
++		return -ENOMEM;
++	}
++
++	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!wdt->regs) {
++		ret = -ENOMEM;
++		dev_dbg(&pdev->dev, "could not map I/O memory\n");
++		goto err_free;
++	}
++	wdt->users = 0;
++	wdt->miscdev.minor = WATCHDOG_MINOR;
++	wdt->miscdev.name = "watchdog";
++	wdt->miscdev.fops = &at32_wdt_fops;
++
++	if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
++		at32_wdt_settimeout(TIMEOUT_MAX);
++		dev_dbg(&pdev->dev,
++			"default timeout invalid, set to %d sec.\n",
++			TIMEOUT_MAX);
++	}
++
++	ret = misc_register(&wdt->miscdev);
++	if (ret) {
++		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
++		goto err_iounmap;
++	}
++
++	platform_set_drvdata(pdev, wdt);
++	wdt->miscdev.parent = &pdev->dev;
++	dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
++
++	return 0;
++
++err_iounmap:
++	iounmap(wdt->regs);
++err_free:
++	kfree(wdt);
++	wdt = NULL;
++	return ret;
++}
++
++static int __exit at32_wdt_remove(struct platform_device *pdev)
++{
++	if (wdt && platform_get_drvdata(pdev) == wdt) {
++		misc_deregister(&wdt->miscdev);
++		iounmap(wdt->regs);
++		kfree(wdt);
++		wdt = NULL;
++		platform_set_drvdata(pdev, NULL);
++	}
++
++	return 0;
++}
++
++static void at32_wdt_shutdown(struct platform_device *pdev)
++{
++	at32_wdt_stop();
++}
++
++#ifdef CONFIG_PM
++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++	at32_wdt_stop();
++	return 0;
++}
++
++static int at32_wdt_resume(struct platform_device *pdev)
++{
++	if (wdt->users)
++		at32_wdt_start();
++	return 0;
++}
++#else
++#define at32_wdt_suspend NULL
++#define at32_wdt_resume NULL
++#endif
++
++static struct platform_driver at32_wdt_driver = {
++	.remove		= __exit_p(at32_wdt_remove),
++	.suspend	= at32_wdt_suspend,
++	.resume		= at32_wdt_resume,
++	.driver		= {
++		.name	= "at32_wdt",
++		.owner	= THIS_MODULE,
++	},
++	.shutdown	= at32_wdt_shutdown,
++};
++
++static int __init at32_wdt_init(void)
++{
++	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++}
++module_init(at32_wdt_init);
++
++static void __exit at32_wdt_exit(void)
++{
++	platform_driver_unregister(&at32_wdt_driver);
++}
++module_exit(at32_wdt_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 838dc1c..80da12d 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -4,6 +4,26 @@
+ 
+ menu "I2C Hardware Bus support"
+ 
++config I2C_ATMELTWI
++	tristate "Atmel TWI/I2C"
++	depends on I2C
++	help
++	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
++	  AT91-based device and want to use its built-in TWI
++	  functionality. Atmel's TWI is compatible with Philips' I2C
++	  protocol. If in doubt, say NO
++
++config I2C_ATMELTWI_BAUDRATE
++	prompt "Atmel TWI baudrate"
++	depends on I2C_ATMELTWI
++	int
++	default 100000
++	help
++	  Set the TWI/I2C baudrate. This will alter the default value. A
++	  different baudrate can be set by using a module parameter as well. If
++	  no parameter is provided when loading, this is the value that will be
++	  used.
++
+ config I2C_ALI1535
+ 	tristate "ALI 1535"
+ 	depends on PCI
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 14d1432..fd7c3b3 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
+new file mode 100644
+index 0000000..8502ea6
+--- /dev/null
++++ b/drivers/i2c/busses/atmeltwi.h
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ASM_AVR32_TWI_H__
++#define __ASM_AVR32_TWI_H__
++
++/* TWI register offsets */
++#define TWI_CR					0x0000
++#define TWI_MMR					0x0004
++#define TWI_SMR					0x0008
++#define TWI_IADR				0x000c
++#define TWI_CWGR				0x0010
++#define TWI_SR					0x0020
++#define TWI_IER					0x0024
++#define TWI_IDR					0x0028
++#define TWI_IMR					0x002c
++#define TWI_RHR					0x0030
++#define TWI_THR					0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET			0
++#define TWI_START_SIZE				1
++#define TWI_STOP_OFFSET				1
++#define TWI_STOP_SIZE				1
++#define TWI_MSEN_OFFSET				2
++#define TWI_MSEN_SIZE				1
++#define TWI_MSDIS_OFFSET			3
++#define TWI_MSDIS_SIZE				1
++#define TWI_SVEN_OFFSET				4
++#define TWI_SVEN_SIZE				1
++#define TWI_SVDIS_OFFSET			5
++#define TWI_SVDIS_SIZE				1
++#define TWI_SWRST_OFFSET			7
++#define TWI_SWRST_SIZE				1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET			8
++#define TWI_IADRSZ_SIZE				2
++#define TWI_MREAD_OFFSET			12
++#define TWI_MREAD_SIZE				1
++#define TWI_DADR_OFFSET				16
++#define TWI_DADR_SIZE				7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET				16
++#define TWI_SADR_SIZE				7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET				0
++#define TWI_IADR_SIZE				24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET			0
++#define TWI_CLDIV_SIZE				8
++#define TWI_CHDIV_OFFSET			8
++#define TWI_CHDIV_SIZE				8
++#define TWI_CKDIV_OFFSET			16
++#define TWI_CKDIV_SIZE				3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET			0
++#define TWI_TXCOMP_SIZE				1
++#define TWI_RXRDY_OFFSET			1
++#define TWI_RXRDY_SIZE				1
++#define TWI_TXRDY_OFFSET			2
++#define TWI_TXRDY_SIZE				1
++#define TWI_SVDIR_OFFSET			3
++#define TWI_SVDIR_SIZE				1
++#define TWI_SVACC_OFFSET			4
++#define TWI_SVACC_SIZE				1
++#define TWI_GCACC_OFFSET			5
++#define TWI_GCACC_SIZE				1
++#define TWI_OVRE_OFFSET				6
++#define TWI_OVRE_SIZE				1
++#define TWI_UNRE_OFFSET				7
++#define TWI_UNRE_SIZE				1
++#define TWI_NACK_OFFSET				8
++#define TWI_NACK_SIZE				1
++#define TWI_ARBLST_OFFSET			9
++#define TWI_ARBLST_SIZE				1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET			0
++#define TWI_RXDATA_SIZE				8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET			0
++#define TWI_TXDATA_SIZE				8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR			0
++#define TWI_IADRSZ_ONE_BYTE			1
++#define TWI_IADRSZ_TWO_BYTES			2
++#define TWI_IADRSZ_THREE_BYTES			3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name)					\
++	(1 << TWI_##name##_OFFSET)
++#define TWI_BF(name,value)				\
++	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
++	 << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name,value)				\
++	(((value) >> TWI_##name##_OFFSET)		\
++	 & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name,value,old)			\
++	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
++		    << TWI_##name##_OFFSET))		\
++	 | TWI_BF(name,value))
++
++/* Register access macros */
++#define twi_readl(port,reg)				\
++	__raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ASM_AVR32_TWI_H__ */
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
+new file mode 100644
+index 0000000..9a3f223
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.c
+@@ -0,0 +1,383 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <asm/io.h>
++#include <linux/time.h>
++#include "atmeltwi.h"
++
++static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++	void __iomem *regs;
++	struct i2c_adapter adapter;
++	struct clk *pclk;
++	spinlock_t lock;
++	struct completion comp;
++	u32 intmask;
++	u8 *buf;
++	u8 len;
++	u8 acks_left;
++	u8 nack;
++	unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * Initialize the TWI hardware registers.
++ */
++static int __devinit twi_hwinit(struct atmel_twi *twi)
++{
++	unsigned long cdiv, ckdiv=0;
++
++	twi_writel(twi, IDR, ~0UL);
++	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
++	twi_readl(twi, SR);
++
++	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++	while (cdiv > 255) {
++		ckdiv++;
++		cdiv = cdiv >> 1;
++	}
++
++	if (ckdiv > 7)
++		return -EINVAL;
++	else
++		twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
++			       | TWI_BF(CHDIV, cdiv)
++			       | TWI_BF(CLDIV, cdiv)));
++	return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out (~100ms).
++ */
++static short twi_complete(struct atmel_twi *twi, u32 mask)
++{
++	int timeout = msecs_to_jiffies(100);
++
++	twi->intmask = mask;
++	init_completion(&twi->comp);
++
++	twi_writel(twi, IER, mask);
++
++	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++		/* RESET TWI interface */
++		twi_writel(twi, CR, TWI_BIT(SWRST));
++
++		/* Reinitialize TWI */
++		twi_hwinit(twi);
++
++		return -ETIMEDOUT;
++	}
++	return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
++{
++	struct atmel_twi *twi = to_atmel_twi(adap);
++	struct i2c_msg *pmsg;
++	int i;
++
++	/* get first message */
++	pmsg = msgs;
++
++	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++	twi->nack = 0;
++	for (i = 0; i < num; i++, pmsg++) {
++		twi->len = pmsg->len;
++		twi->buf = pmsg->buf;
++		twi->acks_left = pmsg->len;
++		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++		dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
++			i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
++			pmsg->len > 1 ? "s" : "",
++			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++		/* enable */
++		twi_writel(twi, CR, TWI_BIT(MSEN));
++
++		if (pmsg->flags & I2C_M_RD) {
++			if (twi->len == 1)
++				twi_writel(twi, CR,
++					TWI_BIT(START) | TWI_BIT(STOP));
++			else
++				twi_writel(twi, CR, TWI_BIT(START));
++
++			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
++					twi->acks_left);
++				return -ETIMEDOUT;
++			}
++		} else {
++			twi_writel(twi, THR, twi->buf[0]);
++			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
++				twi->acks_left);
++				return -ETIMEDOUT;
++			}
++
++			if (twi->nack)
++			    return -ENODEV;
++		}
++
++		/* Disable TWI interface */
++		twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++	} /* end cur msg */
++
++	return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++	struct atmel_twi *twi = dev_id;
++	int status = twi_readl(twi, SR);
++
++	/* Save state for later debug prints */
++	int old_mask = twi->intmask;
++	int old_status = status;
++
++	if (twi->intmask & status) {
++		if (status & TWI_BIT(NACK))
++			goto nack;
++
++		status &= twi->intmask;
++
++		if (status & TWI_BIT(TXCOMP))
++		    goto complete;
++
++		else if (status & TWI_BIT(RXRDY)) {
++			if ( twi->acks_left > 0 ) {
++			    twi->buf[twi->len - twi->acks_left] =
++				twi_readl(twi, RHR);
++			    twi->acks_left--;
++			}
++			if ( twi->acks_left == 1 )
++				twi_writel(twi, CR, TWI_BIT(STOP));
++
++			if (twi->acks_left == 0 ) {
++				twi->intmask = TWI_BIT(TXCOMP);
++				twi_writel(twi, IER, TWI_BIT(TXCOMP));
++			}
++		} else if (status & TWI_BIT(TXRDY)) {
++			twi->acks_left--;
++			if ( twi->acks_left == 0 ) {
++				twi->intmask = TWI_BIT(TXCOMP);
++				twi_writel(twi, IER, TWI_BIT(TXCOMP));
++			} else if (twi->acks_left > 0)
++				twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
++		}
++	}
++
++	dev_dbg(&twi->adapter.dev,
++		"TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
++		old_status, old_mask, twi->acks_left);
++
++	return IRQ_HANDLED;
++
++nack:
++	dev_dbg(&twi->adapter.dev, "NACK received!\n");
++	twi->nack = 1;
++
++complete:
++	twi_writel(twi, IDR, ~0UL);
++	complete(&twi->comp);
++
++	dev_dbg(&twi->adapter.dev,
++		"TWI ISR, SR 0x%08X, intmask 0x%08X, \
++		acks_left %i - completed.\n",
++		old_status, old_mask, twi->acks_left);
++
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * Return list of supported functionality.
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++/* For now, we only handle combined mode (smbus) */
++static struct i2c_algorithm twi_algorithm = {
++	.master_xfer	= twi_xfer,
++	.functionality	= twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __devinit twi_probe(struct platform_device *pdev)
++{
++	struct atmel_twi *twi;
++	struct resource *regs;
++	struct clk *pclk;
++	struct i2c_adapter *adapter;
++	int rc, irq;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(pclk))
++		return PTR_ERR(pclk);
++	clk_enable(pclk);
++
++	rc = -ENOMEM;
++	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++	if (!twi) {
++		dev_err(&pdev->dev, "can't allocate interface!\n");
++		goto err_alloc_twi;
++	}
++
++	twi->pclk = pclk;
++	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!twi->regs)
++		goto err_ioremap;
++
++	irq = platform_get_irq(pdev,0);
++	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++	if (rc) {
++		dev_err(&pdev->dev, "can't bind irq!\n");
++		goto err_irq;
++	}
++	twi->irq = irq;
++
++	rc = twi_hwinit(twi);
++	if (rc) {
++		dev_err(&pdev->dev, "Unable to set baudrate\n");
++		goto err_hw_init;
++	}
++
++	adapter = &twi->adapter;
++	sprintf(adapter->name, "TWI");
++	adapter->algo = &twi_algorithm;
++	adapter->class = I2C_CLASS_HWMON;
++	adapter->dev.parent = &pdev->dev;
++
++	platform_set_drvdata(pdev, twi);
++
++	rc = i2c_add_adapter(adapter);
++	if (rc) {
++		dev_err(&pdev->dev, "Adapter %s registration failed\n",
++			adapter->name);
++		goto err_register;
++	}
++
++	dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
++		 baudrate/1000, (unsigned long)regs->start);
++
++	return 0;
++
++
++err_register:
++	platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++	free_irq(irq, twi);
++
++err_irq:
++	iounmap(twi->regs);
++
++err_ioremap:
++	kfree(twi);
++
++err_alloc_twi:
++	clk_disable(pclk);
++	clk_put(pclk);
++
++	return rc;
++}
++
++static int __devexit twi_remove(struct platform_device *pdev)
++{
++	struct atmel_twi *twi = platform_get_drvdata(pdev);
++	int res;
++
++	platform_set_drvdata(pdev, NULL);
++	res = i2c_del_adapter(&twi->adapter);
++	twi_writel(twi, CR, TWI_BIT(MSDIS));
++	iounmap(twi->regs);
++	clk_disable(twi->pclk);
++	clk_put(twi->pclk);
++	free_irq(twi->irq, twi);
++	kfree(twi);
++
++	return res;
++}
++
++static struct platform_driver twi_driver = {
++	.probe		= twi_probe,
++	.remove		= __devexit_p(twi_remove),
++	.driver		= {
++		.name	= "atmel_twi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init atmel_twi_init(void)
++{
++	return platform_driver_register(&twi_driver);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++	platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
+index 50e06e8..7bbea09 100644
+--- a/drivers/input/mouse/Kconfig
++++ b/drivers/input/mouse/Kconfig
+@@ -216,4 +216,20 @@ config MOUSE_HIL
+ 	help
+ 	  Say Y here to support HIL pointers.
+ 
++config MOUSE_GPIO
++	tristate "GPIO mouse"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver simulates a mouse on GPIO lines of various CPUs (and some
++	  other chips).
++
++	  Say Y here if your device has buttons or a simple joystick connected
++	  directly to GPIO lines. Your board-specific setup logic must also
++	  provide a platform device and platform data saying which GPIOs are
++	  used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio_mouse.
++
+ endif
+diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
+index aa4ba87..9e6e363 100644
+--- a/drivers/input/mouse/Makefile
++++ b/drivers/input/mouse/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
+ obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
+ obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
+ obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
++obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
+ 
+ psmouse-objs := psmouse-base.o synaptics.o
+ 
+diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
+new file mode 100644
+index 0000000..0936d6b
+--- /dev/null
++++ b/drivers/input/mouse/gpio_mouse.c
+@@ -0,0 +1,196 @@
++/*
++ * Driver for simulating a mouse on GPIO lines.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/input-polldev.h>
++#include <linux/gpio_mouse.h>
++
++#include <asm/gpio.h>
++
++/*
++ * Timer function which is run every scan_ms ms when the device is opened.
++ * The dev input varaible is set to the the input_dev pointer.
++ */
++static void gpio_mouse_scan(struct input_polled_dev *dev)
++{
++	struct gpio_mouse_platform_data *gpio = dev->private;
++	struct input_dev *input = dev->input;
++	int x, y;
++
++	if (gpio->bleft >= 0)
++		input_report_key(input, BTN_LEFT,
++				gpio_get_value(gpio->bleft) ^ gpio->polarity);
++	if (gpio->bmiddle >= 0)
++		input_report_key(input, BTN_MIDDLE,
++				gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
++	if (gpio->bright >= 0)
++		input_report_key(input, BTN_RIGHT,
++				gpio_get_value(gpio->bright) ^ gpio->polarity);
++
++	x = (gpio_get_value(gpio->right) ^ gpio->polarity)
++		- (gpio_get_value(gpio->left) ^ gpio->polarity);
++	y = (gpio_get_value(gpio->down) ^ gpio->polarity)
++		- (gpio_get_value(gpio->up) ^ gpio->polarity);
++
++	input_report_rel(input, REL_X, x);
++	input_report_rel(input, REL_Y, y);
++	input_sync(input);
++}
++
++static int __init gpio_mouse_probe(struct platform_device *pdev)
++{
++	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
++	struct input_polled_dev *input_poll;
++	struct input_dev *input;
++	int pin, i;
++	int error;
++
++	if (!pdata) {
++		dev_err(&pdev->dev, "no platform data\n");
++		error = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->scan_ms < 0) {
++		dev_err(&pdev->dev, "invalid scan time\n");
++		error = -EINVAL;
++		goto out;
++	}
++
++	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
++		pin = pdata->pins[i];
++
++		if (pin < 0) {
++
++			if (i <= GPIO_MOUSE_PIN_RIGHT) {
++				/* Mouse direction is required. */
++				dev_err(&pdev->dev,
++					"missing GPIO for directions\n");
++				error = -EINVAL;
++				goto out_free_gpios;
++			}
++
++			if (i == GPIO_MOUSE_PIN_BLEFT)
++				dev_dbg(&pdev->dev, "no left button defined\n");
++
++		} else {
++			error = gpio_request(pin, "gpio_mouse");
++			if (error) {
++				dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
++					pin, i);
++				goto out_free_gpios;
++			}
++
++			gpio_direction_input(pin);
++		}
++	}
++
++	input_poll = input_allocate_polled_device();
++	if (!input_poll) {
++		dev_err(&pdev->dev, "not enough memory for input device\n");
++		error = -ENOMEM;
++		goto out_free_gpios;
++	}
++
++	platform_set_drvdata(pdev, input_poll);
++
++	/* set input-polldev handlers */
++	input_poll->private = pdata;
++	input_poll->poll = gpio_mouse_scan;
++	input_poll->poll_interval = pdata->scan_ms;
++
++	input = input_poll->input;
++	input->name = pdev->name;
++	input->id.bustype = BUS_HOST;
++	input->dev.parent = &pdev->dev;
++
++	input_set_capability(input, EV_REL, REL_X);
++	input_set_capability(input, EV_REL, REL_Y);
++	if (pdata->bleft >= 0)
++		input_set_capability(input, EV_KEY, BTN_LEFT);
++	if (pdata->bmiddle >= 0)
++		input_set_capability(input, EV_KEY, BTN_MIDDLE);
++	if (pdata->bright >= 0)
++		input_set_capability(input, EV_KEY, BTN_RIGHT);
++
++	error = input_register_polled_device(input_poll);
++	if (error) {
++		dev_err(&pdev->dev, "could not register input device\n");
++		goto out_free_polldev;
++	}
++
++	dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
++			pdata->scan_ms,
++			pdata->bleft < 0 ? "" : "left ",
++			pdata->bmiddle < 0 ? "" : "middle ",
++			pdata->bright < 0 ? "" : "right");
++
++	return 0;
++
++ out_free_polldev:
++	input_free_polled_device(input_poll);
++	platform_set_drvdata(pdev, NULL);
++
++ out_free_gpios:
++	while (--i >= 0) {
++		pin = pdata->pins[i];
++		if (pin)
++			gpio_free(pin);
++	}
++ out:
++	return error;
++}
++
++static int __devexit gpio_mouse_remove(struct platform_device *pdev)
++{
++	struct input_polled_dev *input = platform_get_drvdata(pdev);
++	struct gpio_mouse_platform_data *pdata = input->private;
++	int pin, i;
++
++	input_unregister_polled_device(input);
++	input_free_polled_device(input);
++
++	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
++		pin = pdata->pins[i];
++		if (pin >= 0)
++			gpio_free(pin);
++	}
++
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++struct platform_driver gpio_mouse_device_driver = {
++	.remove		= __devexit_p(gpio_mouse_remove),
++	.driver		= {
++		.name	= "gpio_mouse",
++	}
++};
++
++static int __init gpio_mouse_init(void)
++{
++	return platform_driver_probe(&gpio_mouse_device_driver,
++			gpio_mouse_probe);
++}
++module_init(gpio_mouse_init);
++
++static void __exit gpio_mouse_exit(void)
++{
++	platform_driver_unregister(&gpio_mouse_device_driver);
++}
++module_exit(gpio_mouse_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("GPIO mouse driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index 87d2046..9ce3ca1 100644
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -95,6 +95,14 @@ config LEDS_COBALT
+ 	help
+ 	  This option enables support for the front LED on Cobalt Server
+ 
++config LEDS_GPIO
++	tristate "LED Support for GPIO connected LEDs"
++	depends on LEDS_CLASS && GENERIC_GPIO
++	help
++	  This option enables support for the LEDs connected to GPIO
++	  outputs. To be useful the particular board must have LEDs
++	  and they must be connected to the GPIO lines.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index aa2c18e..f8995c9 100644
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
+ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
++obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
+new file mode 100644
+index 0000000..47d90db
+--- /dev/null
++++ b/drivers/leds/leds-gpio.c
+@@ -0,0 +1,199 @@
++/*
++ * LEDs driver for GPIOs
++ *
++ * Copyright (C) 2007 8D Technologies inc.
++ * Raphael Assenat <raph@8d.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
++
++#include <asm/gpio.h>
++
++struct gpio_led_data {
++	struct led_classdev cdev;
++	unsigned gpio;
++	struct work_struct work;
++	u8 new_level;
++	u8 can_sleep;
++	u8 active_low;
++};
++
++static void gpio_led_work(struct work_struct *work)
++{
++	struct gpio_led_data	*led_dat =
++		container_of(work, struct gpio_led_data, work);
++
++	gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
++}
++
++static void gpio_led_set(struct led_classdev *led_cdev,
++	enum led_brightness value)
++{
++	struct gpio_led_data *led_dat =
++		container_of(led_cdev, struct gpio_led_data, cdev);
++	int level;
++
++	if (value == LED_OFF)
++		level = 0;
++	else
++		level = 1;
++
++	if (led_dat->active_low)
++		level = !level;
++
++	/* setting GPIOs with I2C/etc requires a preemptible task context */
++	if (led_dat->can_sleep) {
++		if (preempt_count()) {
++			led_dat->new_level = level;
++			schedule_work(&led_dat->work);
++		} else
++			gpio_set_value_cansleep(led_dat->gpio, level);
++	} else
++		gpio_set_value(led_dat->gpio, level);
++}
++
++static int __init gpio_led_probe(struct platform_device *pdev)
++{
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led *cur_led;
++	struct gpio_led_data *leds_data, *led_dat;
++	int i, ret = 0;
++
++	if (!pdata)
++		return -EBUSY;
++
++	leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
++				GFP_KERNEL);
++	if (!leds_data)
++		return -ENOMEM;
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		cur_led = &pdata->leds[i];
++		led_dat = &leds_data[i];
++
++		led_dat->cdev.name = cur_led->name;
++		led_dat->cdev.default_trigger = cur_led->default_trigger;
++		led_dat->gpio = cur_led->gpio;
++		led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
++		led_dat->active_low = cur_led->active_low;
++		led_dat->cdev.brightness_set = gpio_led_set;
++		led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
++
++		ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
++		if (ret < 0)
++			goto err;
++
++		gpio_direction_output(led_dat->gpio, led_dat->active_low);
++
++		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++		if (ret < 0) {
++			gpio_free(led_dat->gpio);
++			goto err;
++		}
++
++		INIT_WORK(&led_dat->work, gpio_led_work);
++	}
++
++	platform_set_drvdata(pdev, leds_data);
++
++	return 0;
++
++err:
++	if (i > 0) {
++		for (i = i - 1; i >= 0; i--) {
++			led_classdev_unregister(&leds_data[i].cdev);
++			gpio_free(leds_data[i].gpio);
++		}
++	}
++
++	flush_scheduled_work();
++	kfree(leds_data);
++
++	return ret;
++}
++
++static int __exit gpio_led_remove(struct platform_device *pdev)
++{
++	int i;
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led_data *leds_data;
++
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		led_classdev_unregister(&leds_data[i].cdev);
++		gpio_free(leds_data[i].gpio);
++	}
++	
++	kfree(leds_data);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led_data *leds_data;
++	int i;
++	
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++)
++		led_classdev_suspend(&leds_data[i].cdev);
++
++	return 0;
++}
++
++static int gpio_led_resume(struct platform_device *pdev)
++{
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led_data *leds_data;
++	int i;
++
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++)
++		led_classdev_resume(&leds_data[i].cdev);
++
++	return 0;
++}
++#else
++#define gpio_led_suspend NULL
++#define gpio_led_resume NULL
++#endif
++
++static struct platform_driver gpio_led_driver = {
++	.remove		= __exit_p(gpio_led_remove),
++	.suspend	= gpio_led_suspend,
++	.resume		= gpio_led_resume,
++	.driver		= {
++		.name	= "leds-gpio",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init gpio_led_init(void)
++{
++	return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
++}
++
++static void __exit gpio_led_exit(void)
++{
++	platform_driver_unregister(&gpio_led_driver);
++}
++
++module_init(gpio_led_init);
++module_exit(gpio_led_exit);
++
++MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
++MODULE_DESCRIPTION("GPIO LED driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 616eee9..0810d83 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -187,5 +187,15 @@ config THINKPAD_ACPI_BAY
+ 
+ 	  If you are not sure, say Y here.
+ 
++config ATMEL_SSC
++	tristate "Device driver for Atmel SSC peripheral"
++	depends on AVR32 || ARCH_AT91
++	---help---
++	  This option enables device driver support for Atmel Syncronized
++	  Serial Communication peripheral (SSC).
++
++	  The SSC peripheral supports a wide variety of serial frame based
++	  communications, i.e. I2S, SPI, etc.
+ 
++	  If unsure, say N.
+ endmenu
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 8abbf2f..2d52cc6 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -14,3 +14,4 @@ obj-$(CONFIG_PHANTOM)		+= phantom.o
+ obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
+ obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
++obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
+new file mode 100644
+index 0000000..058ccac
+--- /dev/null
++++ b/drivers/misc/atmel-ssc.c
+@@ -0,0 +1,174 @@
++/*
++ * Atmel SSC driver
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/atmel-ssc.h>
++
++/* Serialize access to ssc_list and user count */
++static DEFINE_SPINLOCK(user_lock);
++static LIST_HEAD(ssc_list);
++
++struct ssc_device *ssc_request(unsigned int ssc_num)
++{
++	int ssc_valid = 0;
++	struct ssc_device *ssc;
++
++	spin_lock(&user_lock);
++	list_for_each_entry(ssc, &ssc_list, list) {
++		if (ssc->pdev->id == ssc_num) {
++			ssc_valid = 1;
++			break;
++		}
++	}
++
++	if (!ssc_valid) {
++		spin_unlock(&user_lock);
++		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
++		return ERR_PTR(-ENODEV);
++	}
++
++	if (ssc->user) {
++		spin_unlock(&user_lock);
++		dev_dbg(&ssc->pdev->dev, "module busy\n");
++		return ERR_PTR(-EBUSY);
++	}
++	ssc->user++;
++	spin_unlock(&user_lock);
++
++	clk_enable(ssc->clk);
++
++	return ssc;
++}
++EXPORT_SYMBOL(ssc_request);
++
++void ssc_free(struct ssc_device *ssc)
++{
++	spin_lock(&user_lock);
++	if (ssc->user) {
++		ssc->user--;
++		clk_disable(ssc->clk);
++	} else {
++		dev_dbg(&ssc->pdev->dev, "device already free\n");
++	}
++	spin_unlock(&user_lock);
++}
++EXPORT_SYMBOL(ssc_free);
++
++static int __init ssc_probe(struct platform_device *pdev)
++{
++	int retval = 0;
++	struct resource *regs;
++	struct ssc_device *ssc;
++
++	ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
++	if (!ssc) {
++		dev_dbg(&pdev->dev, "out of memory\n");
++		retval = -ENOMEM;
++		goto out;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "no mmio resource defined\n");
++		retval = -ENXIO;
++		goto out_free;
++	}
++
++	ssc->clk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(ssc->clk)) {
++		dev_dbg(&pdev->dev, "no pclk clock defined\n");
++		retval = -ENXIO;
++		goto out_free;
++	}
++
++	ssc->pdev = pdev;
++	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!ssc->regs) {
++		dev_dbg(&pdev->dev, "ioremap failed\n");
++		retval = -EINVAL;
++		goto out_clk;
++	}
++
++	/* disable all interrupts */
++	clk_enable(ssc->clk);
++	ssc_writel(ssc->regs, IDR, ~0UL);
++	ssc_readl(ssc->regs, SR);
++	clk_disable(ssc->clk);
++
++	ssc->irq = platform_get_irq(pdev, 0);
++	if (!ssc->irq) {
++		dev_dbg(&pdev->dev, "could not get irq\n");
++		retval = -ENXIO;
++		goto out_unmap;
++	}
++
++	spin_lock(&user_lock);
++	list_add_tail(&ssc->list, &ssc_list);
++	spin_unlock(&user_lock);
++
++	platform_set_drvdata(pdev, ssc);
++
++	dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
++			ssc->regs, ssc->irq);
++
++	goto out;
++
++out_unmap:
++	iounmap(ssc->regs);
++out_clk:
++	clk_put(ssc->clk);
++out_free:
++	kfree(ssc);
++out:
++	return retval;
++}
++
++static int __devexit ssc_remove(struct platform_device *pdev)
++{
++	struct ssc_device *ssc = platform_get_drvdata(pdev);
++
++	spin_lock(&user_lock);
++	iounmap(ssc->regs);
++	clk_put(ssc->clk);
++	list_del(&ssc->list);
++	kfree(ssc);
++	spin_unlock(&user_lock);
++
++	return 0;
++}
++
++static struct platform_driver ssc_driver = {
++	.remove		= __devexit_p(ssc_remove),
++	.driver		= {
++		.name		= "ssc",
++	},
++};
++
++static int __init ssc_init(void)
++{
++	return platform_driver_probe(&ssc_driver, ssc_probe);
++}
++module_init(ssc_init);
++
++static void __exit ssc_exit(void)
++{
++	platform_driver_unregister(&ssc_driver);
++}
++module_exit(ssc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index e23082f..1de1716 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -74,6 +74,16 @@ config MMC_AT91
+ 
+ 	  If unsure, say N.
+ 
++config MMC_ATMELMCI
++	tristate "Atmel Multimedia Card Interface support"
++	depends on AVR32 && MMC
++	help
++	  This selects the Atmel Multimedia Card Interface. If you have
++	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++	  slot, say Y or M here.
++
++	  If unsure, say N.
++
+ config MMC_IMX
+ 	tristate "Motorola i.MX Multimedia Card Interface support"
+ 	depends on ARCH_IMX
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 6685f64..4b8e6e2 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+ 
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+new file mode 100644
+index 0000000..74d343f
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -0,0 +1,1217 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_CMD_ERROR_FLAGS	(MCI_BIT(RINDE)	| MCI_BIT(RDIRE) |	\
++				 MCI_BIT(RCRCE) | MCI_BIT(RENDE) |	\
++				 MCI_BIT(RTOE))
++#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
++				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++	EVENT_CMD_COMPLETE = 0,
++	EVENT_CMD_ERROR,
++	EVENT_DATA_COMPLETE,
++	EVENT_DATA_ERROR,
++	EVENT_STOP_SENT,
++	EVENT_STOP_COMPLETE,
++	EVENT_STOP_ERROR,
++	EVENT_DMA_ERROR,
++	EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++	struct dma_request_sg	req;
++	unsigned short		rx_periph_id;
++	unsigned short		tx_periph_id;
++};
++
++struct atmel_mci {
++	struct mmc_host		*mmc;
++	void __iomem		*regs;
++	struct atmel_mci_dma	dma;
++
++	struct mmc_request	*mrq;
++	struct mmc_command	*cmd;
++	struct mmc_data		*data;
++
++	u32			stop_cmdr;
++	u32			stop_iflags;
++
++	struct tasklet_struct	tasklet;
++	unsigned long		pending_events;
++	unsigned long		completed_events;
++	u32			error_status;
++
++	int			present;
++	int			detect_pin;
++	int			wp_pin;
++
++	unsigned long		bus_hz;
++	unsigned long		mapbase;
++	struct clk		*mck;
++	struct platform_device	*pdev;
++
++#ifdef CONFIG_DEBUG_FS
++	struct dentry		*debugfs_root;
++	struct dentry		*debugfs_regs;
++	struct dentry		*debugfs_req;
++	struct dentry		*debugfs_pending_events;
++	struct dentry		*debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host)			\
++	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_cmd_error_is_complete(host)			\
++	test_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_data_is_complete(host)			\
++	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host)		\
++	test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host)			\
++	test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host)			\
++	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_stop_error_is_complete(host)		\
++	test_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_dma_error_is_complete(host)			\
++	test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host)			\
++	test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host)			\
++	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_cmd_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_clear_data_is_pending(host)			\
++	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host)		\
++	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host)			\
++	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_stop_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host)		\
++	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host)			\
++	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_cmd_error_is_completed(host)		\
++	test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_set_data_is_completed(host)			\
++	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host)		\
++	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host)		\
++	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host)			\
++	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_stop_error_is_completed(host)		\
++	test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_set_dma_error_is_completed(host)		\
++	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host)		\
++	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host)			\
++	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_cmd_error_complete(host)		\
++	set_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_set_data_complete(host)			\
++	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host)		\
++	set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host)		\
++	set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host)			\
++	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_stop_error_complete(host)		\
++	set_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_set_dma_error_complete(host)		\
++	set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host)		\
++	set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host)			\
++	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_cmd_error_pending(host)			\
++	set_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_set_data_pending(host)			\
++	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host)		\
++	set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host)			\
++	set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host)			\
++	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_stop_error_pending(host)		\
++	set_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_set_dma_error_pending(host)			\
++	set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host)		\
++	set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host)			\
++	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_cmd_error_pending(host)		\
++	clear_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_clear_data_pending(host)			\
++	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host)		\
++	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host)		\
++	clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host)			\
++	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_stop_error_pending(host)		\
++	clear_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_clear_dma_error_pending(host)		\
++	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host)		\
++	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++	unsigned int nbytes;
++	char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++	struct atmel_mci *host;
++	struct mmc_request *mrq;
++	struct mmc_command *cmd, *stop;
++	struct mmc_data *data;
++	struct req_dbg_data *priv;
++	char *str;
++	unsigned long n = 0;
++
++	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++	if (!priv)
++		return -ENOMEM;
++	str = priv->str;
++
++	mutex_lock(&inode->i_mutex);
++	host = inode->i_private;
++
++	spin_lock_irq(&host->mmc->lock);
++	mrq = host->mrq;
++	if (mrq) {
++		cmd = mrq->cmd;
++		data = mrq->data;
++		stop = mrq->stop;
++		n = snprintf(str, DBG_REQ_BUF_SIZE,
++			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++			     cmd->opcode, cmd->arg, cmd->flags,
++			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
++			     cmd->resp[3], cmd->error);
++		if (n < DBG_REQ_BUF_SIZE && data)
++			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++				      "DATA %u * %u (%u) %x (err %u)\n",
++				      data->blocks, data->blksz,
++				      data->bytes_xfered, data->flags,
++				      data->error);
++		if (n < DBG_REQ_BUF_SIZE && stop)
++			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++				      stop->opcode, stop->arg, stop->flags,
++				      stop->resp[0], stop->resp[1],
++				      stop->resp[2], stop->resp[3],
++				      stop->error);
++	}
++	spin_unlock_irq(&host->mmc->lock);
++	mutex_unlock(&inode->i_mutex);
++
++	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++	file->private_data = priv;
++
++	return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++			    size_t nbytes, loff_t *ppos)
++{
++	struct req_dbg_data *priv = file->private_data;
++
++	return simple_read_from_buffer(buf, nbytes, ppos,
++				       priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= req_dbg_open,
++	.llseek		= no_llseek,
++	.read		= req_dbg_read,
++	.release	= req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++	struct atmel_mci *host;
++	unsigned int i;
++	u32 *data;
++	int ret = -ENOMEM;
++
++	mutex_lock(&inode->i_mutex);
++	host = inode->i_private;
++	data = kmalloc(inode->i_size, GFP_KERNEL);
++	if (!data)
++		goto out;
++
++	spin_lock_irq(&host->mmc->lock);
++	for (i = 0; i < inode->i_size / 4; i++)
++		data[i] = __raw_readl(host->regs + i * 4);
++	spin_unlock_irq(&host->mmc->lock);
++
++	file->private_data = data;
++	ret = 0;
++
++out:
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++			     size_t nbytes, loff_t *ppos)
++{
++	struct inode *inode = file->f_dentry->d_inode;
++	int ret;
++
++	mutex_lock(&inode->i_mutex);
++	ret = simple_read_from_buffer(buf, nbytes, ppos,
++				      file->private_data,
++				      file->f_dentry->d_inode->i_size);
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= regs_dbg_open,
++	.llseek		= generic_file_llseek,
++	.read		= regs_dbg_read,
++	.release	= regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++	struct mmc_host *mmc;
++	struct dentry *root, *regs;
++	struct resource *res;
++
++	mmc = host->mmc;
++	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	host->debugfs_root = root;
++
++	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++	if (!regs)
++		goto err_regs;
++
++	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++	regs->d_inode->i_size = res->end - res->start + 1;
++	host->debugfs_regs = regs;
++
++	host->debugfs_req = debugfs_create_file("req", 0400, root,
++						host, &req_dbg_fops);
++	if (!host->debugfs_req)
++		goto err_req;
++
++	host->debugfs_pending_events
++		= debugfs_create_u32("pending_events", 0400, root,
++				     (u32 *)&host->pending_events);
++	if (!host->debugfs_pending_events)
++		goto err_pending_events;
++
++	host->debugfs_completed_events
++		= debugfs_create_u32("completed_events", 0400, root,
++				     (u32 *)&host->completed_events);
++	if (!host->debugfs_completed_events)
++		goto err_completed_events;
++
++	return;
++
++err_completed_events:
++	debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++	debugfs_remove(host->debugfs_req);
++err_req:
++	debugfs_remove(host->debugfs_regs);
++err_regs:
++	debugfs_remove(host->debugfs_root);
++err_root:
++	host->debugfs_root = NULL;
++	dev_err(&host->pdev->dev,
++		"failed to initialize debugfs for %s\n",
++		mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++	if (host->debugfs_root) {
++		debugfs_remove(host->debugfs_completed_events);
++		debugfs_remove(host->debugfs_pending_events);
++		debugfs_remove(host->debugfs_req);
++		debugfs_remove(host->debugfs_regs);
++		debugfs_remove(host->debugfs_root);
++		host->debugfs_root = NULL;
++	}
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++					unsigned int ns)
++{
++	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++			      struct mmc_data *data)
++{
++	static unsigned dtomul_to_shift[] = {
++		0, 4, 7, 8, 10, 12, 16, 20
++	};
++	unsigned timeout;
++	unsigned dtocyc, dtomul;
++
++	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++	for (dtomul = 0; dtomul < 8; dtomul++) {
++		unsigned shift = dtomul_to_shift[dtomul];
++		dtocyc = (timeout + (1 << shift) - 1) >> shift;
++		if (dtocyc < 15)
++			break;
++	}
++
++	if (dtomul >= 8) {
++		dtomul = 7;
++		dtocyc = 15;
++	}
++
++	pr_debug("%s: setting timeout to %u cycles\n",
++		 mmc_hostname(host->mmc),
++		 dtocyc << dtomul_to_shift[dtomul]);
++	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++				| MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with interrupt flags to be handled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++				 struct mmc_command *cmd,
++				 u32 *cmd_flags)
++{
++	u32 cmdr;
++	u32 iflags;
++
++	cmd->error = MMC_ERR_NONE;
++
++	cmdr = 0;
++	BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
++	cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
++
++	if (cmd->flags & MMC_RSP_PRESENT) {
++		if (cmd->flags & MMC_RSP_136)
++			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++		else
++			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++	}
++
++	/*
++	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++	 * it's too difficult to determine whether this is an ACMD or
++	 * not. Better make it 64.
++	 */
++	cmdr |= MCI_BIT(MAXLAT);
++
++	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++		cmdr |= MCI_BIT(OPDCMD);
++
++	iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
++	if (!(cmd->flags & MMC_RSP_CRC))
++		iflags &= ~MCI_BIT(RCRCE);
++
++	pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++		 mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
++		 (unsigned long)cmdr);
++
++	*cmd_flags = cmdr;
++	return iflags;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++				struct mmc_command *cmd,
++				u32 cmd_flags)
++{
++	WARN_ON(host->cmd);
++	host->cmd = cmd;
++
++	mci_writel(host, ARGR, cmd->arg);
++	mci_writel(host, CMDR, cmd_flags);
++
++	if (cmd->data)
++		dma_start_request(host->dma.req.req.dmac,
++				  host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 cmd_flags;
++
++	WARN_ON(host->data);
++	host->data = data;
++
++	atmci_set_timeout(host, data);
++	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++				| MCI_BF(BLKLEN, data->blksz)));
++	host->dma.req.block_size = data->blksz;
++	host->dma.req.nr_blocks = data->blocks;
++
++	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++	if (data->flags & MMC_DATA_STREAM)
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++	else if (data->blocks > 1)
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++	else
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++	if (data->flags & MMC_DATA_READ) {
++		cmd_flags |= MCI_BIT(TRDIR);
++		host->dma.req.nr_sg
++			= dma_map_sg(&host->pdev->dev, data->sg,
++				     data->sg_len, DMA_FROM_DEVICE);
++		host->dma.req.periph_id = host->dma.rx_periph_id;
++		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++		host->dma.req.data_reg = host->mapbase + MCI_RDR;
++	} else {
++		host->dma.req.nr_sg
++			= dma_map_sg(&host->pdev->dev, data->sg,
++				     data->sg_len, DMA_TO_DEVICE);
++		host->dma.req.periph_id = host->dma.tx_periph_id;
++		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++		host->dma.req.data_reg = host->mapbase + MCI_TDR;
++	}
++	host->dma.req.sg = data->sg;
++
++	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++	return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_data *data = mrq->data;
++	u32 iflags;
++	u32 cmdflags = 0;
++
++	iflags = mci_readl(host, IMR);
++	if (iflags)
++		printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
++
++	WARN_ON(host->mrq != NULL);
++	host->mrq = mrq;
++	host->pending_events = 0;
++	host->completed_events = 0;
++
++	iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
++
++	if (mrq->stop) {
++		BUG_ON(!data);
++
++		host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
++							  &host->stop_cmdr);
++		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++		if (!(data->flags & MMC_DATA_WRITE))
++			host->stop_cmdr |= MCI_BIT(TRDIR);
++		if (data->flags & MMC_DATA_STREAM)
++			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++		else
++			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++	}
++	if (data) {
++		cmdflags |= atmci_prepare_data(mmc, data);
++		iflags |= MCI_DATA_ERROR_FLAGS;
++	}
++
++	atmci_start_command(host, mrq->cmd, cmdflags);
++	mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	if (ios->clock) {
++		u32 clkdiv;
++
++		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++		if (clkdiv > 255)
++			clkdiv = 255;
++		mci_writel(host, MR, (clkdiv
++				      | MCI_BIT(WRPROOF)
++				      | MCI_BIT(RDPROOF)));
++	}
++
++	switch (ios->bus_width) {
++	case MMC_BUS_WIDTH_1:
++		mci_writel(host, SDCR, 0);
++		break;
++	case MMC_BUS_WIDTH_4:
++		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++		break;
++	}
++
++	switch (ios->power_mode) {
++	case MMC_POWER_OFF:
++		mci_writel(host, CR, MCI_BIT(MCIDIS));
++		break;
++	case MMC_POWER_UP:
++		mci_writel(host, CR, MCI_BIT(SWRST));
++		break;
++	case MMC_POWER_ON:
++		mci_writel(host, CR, MCI_BIT(MCIEN));
++		break;
++	}
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++	int read_only = 0;
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	if (host->wp_pin >= 0) {
++		read_only = gpio_get_value(host->wp_pin);
++		pr_debug("%s: card is %s\n", mmc_hostname(mmc),
++			 read_only ? "read-only" : "read-write");
++	} else {
++		pr_debug("%s: no pin for checking read-only switch."
++			 " Assuming write-enable.\n", mmc_hostname(mmc));
++	}
++
++	return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++	.request	= atmci_request,
++	.set_ios	= atmci_set_ios,
++	.get_ro		= atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	WARN_ON(host->cmd || host->data);
++	host->mrq = NULL;
++
++	mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++			  u32 flags)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++	mci_writel(host, IER, host->stop_iflags);
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++	host->data = NULL;
++	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++		     ((data->flags & MMC_DATA_WRITE)
++		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++	/*
++	 * Data might complete before command for very short transfers
++	 * (like READ_SCR)
++	 */
++	if (mci_cmd_is_complete(host)
++	    && (!data->stop || mci_stop_is_complete(host)))
++		atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_error(struct mmc_host *mmc,
++				struct mmc_command *cmd,
++				u32 status)
++{
++	pr_debug("%s: command error: status=0x%08x\n",
++		 mmc_hostname(mmc), status);
++
++	if (status & MCI_BIT(RTOE))
++		cmd->error = MMC_ERR_TIMEOUT;
++	else if (status & MCI_BIT(RCRCE))
++		cmd->error = MMC_ERR_BADCRC;
++	else
++		cmd->error = MMC_ERR_FAILED;
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++	struct mmc_host *mmc = (struct mmc_host *)priv;
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_request *mrq = host->mrq;
++	struct mmc_data *data = host->data;
++
++	pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
++		 host->pending_events, host->completed_events,
++		 mci_readl(host, IMR));
++
++	if (mci_clear_cmd_error_is_pending(host)) {
++		struct mmc_command *cmd;
++
++		mci_set_cmd_error_complete(host);
++		mci_clear_cmd_pending(host);
++		cmd = host->mrq->cmd;
++
++		if (cmd->data) {
++			dma_stop_request(host->dma.req.req.dmac,
++					 host->dma.req.req.channel);
++			host->data = NULL;
++		}
++
++		atmci_command_error(mmc, cmd, host->error_status);
++		atmci_request_end(mmc, cmd->mrq);
++	}
++	if (mci_clear_stop_error_is_pending(host)) {
++		mci_set_stop_error_complete(host);
++		mci_clear_stop_pending(host);
++		atmci_command_error(mmc, host->mrq->stop,
++				    host->error_status);
++		if (!host->data)
++			atmci_request_end(mmc, host->mrq);
++	}
++	if (mci_clear_cmd_is_pending(host)) {
++		mci_set_cmd_complete(host);
++		if (!mrq->data || mci_data_is_complete(host)
++		    || mci_data_error_is_complete(host))
++			atmci_request_end(mmc, mrq);
++	}
++	if (mci_clear_stop_is_pending(host)) {
++		mci_set_stop_complete(host);
++		if (mci_data_is_complete(host)
++		    || mci_data_error_is_complete(host))
++			atmci_request_end(mmc, mrq);
++	}
++	if (mci_clear_dma_error_is_pending(host)) {
++		mci_set_dma_error_complete(host);
++		mci_clear_data_pending(host);
++
++		/* DMA controller got bus error => invalid address */
++		data->error = MMC_ERR_INVALID;
++
++		printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
++		       mmc_hostname(mmc), host->data->bytes_xfered);
++
++		if (data->stop
++		    && !mci_set_stop_sent_is_completed(host))
++			/* TODO: Check if card is still present */
++			send_stop_cmd(host->mmc, data, 0);
++
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_data_error_is_pending(host)) {
++		u32 status = host->error_status;
++
++		mci_set_data_error_complete(host);
++		mci_clear_data_pending(host);
++
++		dma_stop_request(host->dma.req.req.dmac,
++				 host->dma.req.req.channel);
++
++		printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
++		       mmc_hostname(host->mmc), status);
++
++		if (status & MCI_BIT(DCRCE)) {
++			printk(KERN_DEBUG "%s: Data CRC error\n",
++			       mmc_hostname(host->mmc));
++			data->error = MMC_ERR_BADCRC;
++		} else if (status & MCI_BIT(DTOE)) {
++			printk(KERN_DEBUG "%s: Data Timeout error\n",
++			       mmc_hostname(host->mmc));
++			data->error = MMC_ERR_TIMEOUT;
++		} else {
++			printk(KERN_DEBUG "%s: Data FIFO error\n",
++			       mmc_hostname(host->mmc));
++			data->error = MMC_ERR_FIFO;
++		}
++		printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
++		       mmc_hostname(host->mmc), data->bytes_xfered);
++
++		if (data->stop
++		    && !mci_set_stop_sent_is_completed(host))
++			/* TODO: Check if card is still present */
++			send_stop_cmd(host->mmc, data, 0);
++
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_data_is_pending(host)) {
++		mci_set_data_complete(host);
++		data->bytes_xfered = data->blocks * data->blksz;
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_card_detect_is_pending(host)) {
++		/* Reset controller if card is gone */
++		if (!host->present) {
++			mci_writel(host, CR, MCI_BIT(SWRST));
++			mci_writel(host, IDR, ~0UL);
++			mci_writel(host, CR, MCI_BIT(MCIEN));
++		}
++
++		/* Clean up queue if present */
++		if (mrq) {
++			if (!mci_cmd_is_complete(host)
++			    && !mci_cmd_error_is_complete(host)) {
++				mrq->cmd->error = MMC_ERR_TIMEOUT;
++			}
++			if (mrq->data && !mci_data_is_complete(host)
++			    && !mci_data_error_is_complete(host)) {
++				dma_stop_request(host->dma.req.req.dmac,
++						host->dma.req.req.channel);
++				host->data->error = MMC_ERR_TIMEOUT;
++				atmci_data_complete(host, data);
++			}
++			if (mrq->stop && !mci_stop_is_complete(host)
++			    && !mci_stop_error_is_complete(host)) {
++				mrq->stop->error = MMC_ERR_TIMEOUT;
++			}
++
++			host->cmd = NULL;
++			atmci_request_end(mmc, mrq);
++		}
++		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++	}
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_command *cmd = host->cmd;
++
++	/*
++	 * Read the response now so that we're free to send a new
++	 * command immediately.
++	 */
++	cmd->resp[0] = mci_readl(host, RSPR);
++	cmd->resp[1] = mci_readl(host, RSPR);
++	cmd->resp[2] = mci_readl(host, RSPR);
++	cmd->resp[3] = mci_readl(host, RSPR);
++
++	mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
++	host->cmd = NULL;
++
++	if (mci_stop_sent_is_complete(host))
++		mci_set_stop_pending(host);
++	else
++		mci_set_cmd_pending(host);
++
++	tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++	struct dma_request_sg *req = to_dma_request_sg(_req);
++	struct atmel_mci_dma *dma;
++	struct atmel_mci *host;
++	struct mmc_data *data;
++
++	dma = container_of(req, struct atmel_mci_dma, req);
++	host = container_of(dma, struct atmel_mci, dma);
++	data = host->data;
++
++	if (data->stop && !mci_set_stop_sent_is_completed(host))
++		send_stop_cmd(host->mmc, data, 0);
++
++	if (data->flags & MMC_DATA_READ) {
++		mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
++		mci_set_data_pending(host);
++		tasklet_schedule(&host->tasklet);
++	} else {
++		/*
++		 * For the WRITE case, wait for NOTBUSY. This function
++		 * is called when everything has been written to the
++		 * controller, not when the card is done programming.
++		 */
++		mci_writel(host, IER, MCI_BIT(NOTBUSY));
++	}
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++	struct dma_request_sg *req = to_dma_request_sg(_req);
++	struct atmel_mci_dma *dma;
++	struct atmel_mci *host;
++
++	dma = container_of(req, struct atmel_mci_dma, req);
++	host = container_of(dma, struct atmel_mci, dma);
++
++	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++			       | MCI_DATA_ERROR_FLAGS));
++
++	mci_set_dma_error_pending(host);
++	tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++	struct mmc_host *mmc = dev_id;
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 status, mask, pending;
++
++	spin_lock(&mmc->lock);
++
++	status = mci_readl(host, SR);
++	mask = mci_readl(host, IMR);
++	pending = status & mask;
++
++	do {
++		if (pending & MCI_CMD_ERROR_FLAGS) {
++			mci_writel(host, IDR, (MCI_BIT(CMDRDY)
++					       | MCI_BIT(NOTBUSY)
++					       | MCI_CMD_ERROR_FLAGS
++					       | MCI_DATA_ERROR_FLAGS));
++			host->error_status = status;
++			host->cmd = NULL;
++			if (mci_stop_sent_is_complete(host))
++				mci_set_stop_error_pending(host);
++			else
++				mci_set_cmd_error_pending(host);
++			tasklet_schedule(&host->tasklet);
++			break;
++		}
++		if (pending & MCI_DATA_ERROR_FLAGS) {
++			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++					       | MCI_DATA_ERROR_FLAGS));
++			host->error_status = status;
++			mci_set_data_error_pending(host);
++			tasklet_schedule(&host->tasklet);
++			break;
++		}
++		if (pending & MCI_BIT(CMDRDY))
++			atmci_cmd_interrupt(mmc, status);
++		if (pending & MCI_BIT(NOTBUSY)) {
++			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++					       | MCI_DATA_ERROR_FLAGS));
++			mci_set_data_pending(host);
++			tasklet_schedule(&host->tasklet);
++		}
++
++		status = mci_readl(host, SR);
++		mask = mci_readl(host, IMR);
++		pending = status & mask;
++	} while (pending);
++
++	spin_unlock(&mmc->lock);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++	struct mmc_host *mmc = dev_id;
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	int present = !gpio_get_value(irq_to_gpio(irq));
++
++	if (present != host->present) {
++		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
++			 present ? "inserted" : "removed");
++		host->present = present;
++		mci_set_card_detect_pending(host);
++		tasklet_schedule(&host->tasklet);
++	}
++	return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++	struct mci_platform_data *board;
++	struct atmel_mci *host;
++	struct mmc_host *mmc;
++	struct resource *regs;
++	int irq;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	board = pdev->dev.platform_data;
++
++	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++	if (!mmc)
++		return -ENOMEM;
++
++	host = mmc_priv(mmc);
++	host->pdev = pdev;
++	host->mmc = mmc;
++	if (board) {
++		host->detect_pin = board->detect_pin;
++		host->wp_pin = board->wp_pin;
++	} else {
++		host->detect_pin = -1;
++		host->detect_pin = -1;
++	}
++
++	host->mck = clk_get(&pdev->dev, "mci_clk");
++	if (IS_ERR(host->mck)) {
++		ret = PTR_ERR(host->mck);
++		goto out_free_host;
++	}
++	clk_enable(host->mck);
++
++	ret = -ENOMEM;
++	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!host->regs)
++		goto out_disable_clk;
++
++	host->bus_hz = clk_get_rate(host->mck);
++	host->mapbase = regs->start;
++
++	mmc->ops = &atmci_ops;
++	mmc->f_min = (host->bus_hz + 511) / 512;
++	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++	mmc->ocr_avail	= 0x00100000;
++	mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++	if (ret)
++		goto out_unmap;
++
++	/* Assume card is present if we don't have a detect pin */
++	host->present = 1;
++	if (host->detect_pin >= 0) {
++		if (gpio_request(host->detect_pin, "mmc_detect")) {
++			printk(KERN_WARNING "%s: no detect pin available\n",
++			       mmc_hostname(host->mmc));
++			host->detect_pin = -1;
++		} else {
++			host->present = !gpio_get_value(host->detect_pin);
++		}
++	}
++	if (host->wp_pin >= 0) {
++		if (gpio_request(host->wp_pin, "mmc_wp")) {
++			printk(KERN_WARNING "%s: no WP pin available\n",
++			       mmc_hostname(host->mmc));
++			host->wp_pin = -1;
++		}
++	}
++
++	/* TODO: Get this information from platform data */
++	ret = -ENOMEM;
++	host->dma.req.req.dmac = find_dma_controller(0);
++	if (!host->dma.req.req.dmac) {
++		printk(KERN_ERR
++		       "mmci: No DMA controller available, aborting\n");
++		goto out_free_irq;
++	}
++	ret = dma_alloc_channel(host->dma.req.req.dmac);
++	if (ret < 0) {
++		printk(KERN_ERR
++		       "mmci: Unable to allocate DMA channel, aborting\n");
++		goto out_free_irq;
++	}
++	host->dma.req.req.channel = ret;
++	host->dma.req.width = DMA_WIDTH_32BIT;
++	host->dma.req.req.xfer_complete = atmci_xfer_complete;
++	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++	host->dma.req.req.error = atmci_dma_error;
++	host->dma.rx_periph_id = 0;
++	host->dma.tx_periph_id = 1;
++
++	mci_writel(host, CR, MCI_BIT(SWRST));
++	mci_writel(host, IDR, ~0UL);
++	mci_writel(host, CR, MCI_BIT(MCIEN));
++
++	platform_set_drvdata(pdev, host);
++
++	mmc_add_host(mmc);
++
++	if (host->detect_pin >= 0) {
++		ret = request_irq(gpio_to_irq(host->detect_pin),
++				  atmci_detect_change,
++				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++				  DRIVER_NAME, mmc);
++		if (ret) {
++			printk(KERN_ERR
++			       "%s: could not request IRQ %d for detect pin\n",
++			       mmc_hostname(mmc),
++			       gpio_to_irq(host->detect_pin));
++			gpio_free(host->detect_pin);
++			host->detect_pin = -1;
++		}
++	}
++
++	printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
++	       mmc_hostname(mmc), host->mapbase, irq);
++
++	atmci_init_debugfs(host);
++
++	return 0;
++
++out_free_irq:
++	if (host->detect_pin >= 0)
++		gpio_free(host->detect_pin);
++	if (host->wp_pin >= 0)
++		gpio_free(host->wp_pin);
++	free_irq(irq, mmc);
++out_unmap:
++	iounmap(host->regs);
++out_disable_clk:
++	clk_disable(host->mck);
++	clk_put(host->mck);
++out_free_host:
++	mmc_free_host(mmc);
++	return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++	struct atmel_mci *host = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++
++	if (host) {
++		atmci_cleanup_debugfs(host);
++
++		if (host->detect_pin >= 0) {
++			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++			cancel_delayed_work(&host->mmc->detect);
++			gpio_free(host->detect_pin);
++		}
++
++		mmc_remove_host(host->mmc);
++
++		mci_writel(host, IDR, ~0UL);
++		mci_writel(host, CR, MCI_BIT(MCIDIS));
++		mci_readl(host, SR);
++
++		dma_release_channel(host->dma.req.req.dmac,
++				    host->dma.req.req.channel);
++
++		if (host->wp_pin >= 0)
++			gpio_free(host->wp_pin);
++
++		free_irq(platform_get_irq(pdev, 0), host->mmc);
++		iounmap(host->regs);
++
++		clk_disable(host->mck);
++		clk_put(host->mck);
++
++		mmc_free_host(host->mmc);
++	}
++	return 0;
++}
++
++static struct platform_driver atmci_driver = {
++	.probe		= atmci_probe,
++	.remove		= __devexit_p(atmci_remove),
++	.driver		= {
++		.name		= DRIVER_NAME,
++	},
++};
++
++static int __init atmci_init(void)
++{
++	return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++	platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
+new file mode 100644
+index 0000000..60d15c4
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.h
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR					0x0000
++#define MCI_MR					0x0004
++#define MCI_DTOR				0x0008
++#define MCI_SDCR				0x000c
++#define MCI_ARGR				0x0010
++#define MCI_CMDR				0x0014
++#define MCI_BLKR				0x0018
++#define MCI_RSPR				0x0020
++#define MCI_RSPR1				0x0024
++#define MCI_RSPR2				0x0028
++#define MCI_RSPR3				0x002c
++#define MCI_RDR					0x0030
++#define MCI_TDR					0x0034
++#define MCI_SR					0x0040
++#define MCI_IER					0x0044
++#define MCI_IDR					0x0048
++#define MCI_IMR					0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET			0
++#define MCI_MCIEN_SIZE				1
++#define MCI_MCIDIS_OFFSET			1
++#define MCI_MCIDIS_SIZE				1
++#define MCI_PWSEN_OFFSET			2
++#define MCI_PWSEN_SIZE				1
++#define MCI_PWSDIS_OFFSET			3
++#define MCI_PWSDIS_SIZE				1
++#define MCI_SWRST_OFFSET			7
++#define MCI_SWRST_SIZE				1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET			0
++#define MCI_CLKDIV_SIZE				8
++#define MCI_PWSDIV_OFFSET			8
++#define MCI_PWSDIV_SIZE				3
++#define MCI_RDPROOF_OFFSET			11
++#define MCI_RDPROOF_SIZE			1
++#define MCI_WRPROOF_OFFSET			12
++#define MCI_WRPROOF_SIZE			1
++#define MCI_DMAPADV_OFFSET			14
++#define MCI_DMAPADV_SIZE			1
++#define MCI_BLKLEN_OFFSET			16
++#define MCI_BLKLEN_SIZE				16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET			0
++#define MCI_DTOCYC_SIZE				4
++#define MCI_DTOMUL_OFFSET			4
++#define MCI_DTOMUL_SIZE				3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET			0
++#define MCI_SDCSEL_SIZE				4
++#define MCI_SDCBUS_OFFSET			7
++#define MCI_SDCBUS_SIZE				1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET				0
++#define MCI_ARG_SIZE				32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET			0
++#define MCI_CMDNB_SIZE				6
++#define MCI_RSPTYP_OFFSET			6
++#define MCI_RSPTYP_SIZE				2
++#define MCI_SPCMD_OFFSET			8
++#define MCI_SPCMD_SIZE				3
++#define MCI_OPDCMD_OFFSET			11
++#define MCI_OPDCMD_SIZE				1
++#define MCI_MAXLAT_OFFSET			12
++#define MCI_MAXLAT_SIZE				1
++#define MCI_TRCMD_OFFSET			16
++#define MCI_TRCMD_SIZE				2
++#define MCI_TRDIR_OFFSET			18
++#define MCI_TRDIR_SIZE				1
++#define MCI_TRTYP_OFFSET			19
++#define MCI_TRTYP_SIZE				2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET				0
++#define MCI_BCNT_SIZE				16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET				0
++#define MCI_RSP_SIZE				32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET			0
++#define MCI_CMDRDY_SIZE				1
++#define MCI_RXRDY_OFFSET			1
++#define MCI_RXRDY_SIZE				1
++#define MCI_TXRDY_OFFSET			2
++#define MCI_TXRDY_SIZE				1
++#define MCI_BLKE_OFFSET				3
++#define MCI_BLKE_SIZE				1
++#define MCI_DTIP_OFFSET				4
++#define MCI_DTIP_SIZE				1
++#define MCI_NOTBUSY_OFFSET			5
++#define MCI_NOTBUSY_SIZE			1
++#define MCI_ENDRX_OFFSET			6
++#define MCI_ENDRX_SIZE				1
++#define MCI_ENDTX_OFFSET			7
++#define MCI_ENDTX_SIZE				1
++#define MCI_RXBUFF_OFFSET			14
++#define MCI_RXBUFF_SIZE				1
++#define MCI_TXBUFE_OFFSET			15
++#define MCI_TXBUFE_SIZE				1
++#define MCI_RINDE_OFFSET			16
++#define MCI_RINDE_SIZE				1
++#define MCI_RDIRE_OFFSET			17
++#define MCI_RDIRE_SIZE				1
++#define MCI_RCRCE_OFFSET			18
++#define MCI_RCRCE_SIZE				1
++#define MCI_RENDE_OFFSET			19
++#define MCI_RENDE_SIZE				1
++#define MCI_RTOE_OFFSET				20
++#define MCI_RTOE_SIZE				1
++#define MCI_DCRCE_OFFSET			21
++#define MCI_DCRCE_SIZE				1
++#define MCI_DTOE_OFFSET				22
++#define MCI_DTOE_SIZE				1
++#define MCI_OVRE_OFFSET				30
++#define MCI_OVRE_SIZE				1
++#define MCI_UNRE_OFFSET				31
++#define MCI_UNRE_SIZE				1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE			0
++#define MCI_DTOMUL_16_CYCLES			1
++#define MCI_DTOMUL_128_CYCLES			2
++#define MCI_DTOMUL_256_CYCLES			3
++#define MCI_DTOMUL_1024_CYCLES			4
++#define MCI_DTOMUL_4096_CYCLES			5
++#define MCI_DTOMUL_65536_CYCLES			6
++#define MCI_DTOMUL_1048576_CYCLES		7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP			0
++#define MCI_RSPTYP_48_BIT			1
++#define MCI_RSPTYP_136_BIT			2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD			0
++#define MCI_SPCMD_INIT_CMD			1
++#define MCI_SPCMD_SYNC_CMD			2
++#define MCI_SPCMD_INT_CMD			4
++#define MCI_SPCMD_INT_RESP			5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS			0
++#define MCI_TRCMD_START_TRANS			1
++#define MCI_TRCMD_STOP_TRANS			2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK				0
++#define MCI_TRTYP_MULTI_BLOCK			1
++#define MCI_TRTYP_STREAM			2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name)					\
++	(1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value)				\
++	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
++	 << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value)				\
++	(((value) >> MCI_##name##_OFFSET)		\
++	 & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old)			\
++	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
++		    << MCI_##name##_OFFSET))		\
++	 | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg)				\
++	__raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
+index 2f19fa7..94304ca 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -50,6 +50,7 @@
+ #define I82802AC	0x00ac
+ #define MANUFACTURER_ST         0x0020
+ #define M50LPW080       0x002F
++#define AT49BV640D	0x02de
+ 
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
+ }
+ #endif
+ 
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++	struct map_info *map = mtd->priv;
++	struct cfi_private *cfi = map->fldrv_priv;
++	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++	struct cfi_pri_atmel atmel_pri;
++	uint32_t features = 0;
++
++	/* Reverse byteswapping */
++	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++	if (atmel_pri.Features & 0x01) /* chip erase supported */
++		features |= (1<<0);
++	if (atmel_pri.Features & 0x02) /* erase suspend supported */
++		features |= (1<<1);
++	if (atmel_pri.Features & 0x04) /* program suspend supported */
++		features |= (1<<2);
++	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++		features |= (1<<9);
++	if (atmel_pri.Features & 0x20) /* page mode read supported */
++		features |= (1<<7);
++	if (atmel_pri.Features & 0x40) /* queued erase supported */
++		features |= (1<<4);
++	if (atmel_pri.Features & 0x80) /* Protection bits supported */
++		features |= (1<<6);
++
++	extp->FeatureSupport = features;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 1f64458..205977b 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ 		extp->TopBottom = 2;
+ 	else
+ 		extp->TopBottom = 3;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+ 
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
+ #if !FORCE_WORD_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ 	{ 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index b49375a..b9cb56a 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -191,7 +191,7 @@ config MII
+ config MACB
+ 	tristate "Atmel MACB support"
+ 	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+-	select MII
++	select PHYLIB
+ 	help
+ 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
+ 	  parts. Say Y to include support for the MACB chip.
+diff --git a/drivers/net/macb.c b/drivers/net/macb.c
+index 0e04f7a..c20a585 100644
+--- a/drivers/net/macb.c
++++ b/drivers/net/macb.c
+@@ -17,13 +17,14 @@
+ #include <linux/init.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+-#include <linux/mii.h>
+-#include <linux/mutex.h>
+ #include <linux/dma-mapping.h>
+-#include <linux/ethtool.h>
+ #include <linux/platform_device.h>
++#include <linux/phy.h>
+ 
+ #include <asm/arch/board.h>
++#if defined(CONFIG_ARCH_AT91)
++#include <asm/arch/cpu.h>
++#endif
+ 
+ #include "macb.h"
+ 
+@@ -85,172 +86,202 @@ static void __init macb_get_hwaddr(struct macb *bp)
+ 		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
+ }
+ 
+-static void macb_enable_mdio(struct macb *bp)
++static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+ {
+-	unsigned long flags;
+-	u32 reg;
+-
+-	spin_lock_irqsave(&bp->lock, flags);
+-	reg = macb_readl(bp, NCR);
+-	reg |= MACB_BIT(MPE);
+-	macb_writel(bp, NCR, reg);
+-	macb_writel(bp, IER, MACB_BIT(MFD));
+-	spin_unlock_irqrestore(&bp->lock, flags);
+-}
+-
+-static void macb_disable_mdio(struct macb *bp)
+-{
+-	unsigned long flags;
+-	u32 reg;
+-
+-	spin_lock_irqsave(&bp->lock, flags);
+-	reg = macb_readl(bp, NCR);
+-	reg &= ~MACB_BIT(MPE);
+-	macb_writel(bp, NCR, reg);
+-	macb_writel(bp, IDR, MACB_BIT(MFD));
+-	spin_unlock_irqrestore(&bp->lock, flags);
+-}
+-
+-static int macb_mdio_read(struct net_device *dev, int phy_id, int location)
+-{
+-	struct macb *bp = netdev_priv(dev);
++	struct macb *bp = bus->priv;
+ 	int value;
+ 
+-	mutex_lock(&bp->mdio_mutex);
+-
+-	macb_enable_mdio(bp);
+ 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
+ 			      | MACB_BF(RW, MACB_MAN_READ)
+-			      | MACB_BF(PHYA, phy_id)
+-			      | MACB_BF(REGA, location)
++			      | MACB_BF(PHYA, mii_id)
++			      | MACB_BF(REGA, regnum)
+ 			      | MACB_BF(CODE, MACB_MAN_CODE)));
+ 
+-	wait_for_completion(&bp->mdio_complete);
++	/* wait for end of transfer */
++	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
++		cpu_relax();
+ 
+ 	value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
+-	macb_disable_mdio(bp);
+-	mutex_unlock(&bp->mdio_mutex);
+ 
+ 	return value;
+ }
+ 
+-static void macb_mdio_write(struct net_device *dev, int phy_id,
+-			    int location, int val)
++static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++			   u16 value)
+ {
+-	struct macb *bp = netdev_priv(dev);
+-
+-	dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
+-		phy_id, location, val);
+-
+-	mutex_lock(&bp->mdio_mutex);
+-	macb_enable_mdio(bp);
++	struct macb *bp = bus->priv;
+ 
+ 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
+ 			      | MACB_BF(RW, MACB_MAN_WRITE)
+-			      | MACB_BF(PHYA, phy_id)
+-			      | MACB_BF(REGA, location)
++			      | MACB_BF(PHYA, mii_id)
++			      | MACB_BF(REGA, regnum)
+ 			      | MACB_BF(CODE, MACB_MAN_CODE)
+-			      | MACB_BF(DATA, val)));
++			      | MACB_BF(DATA, value)));
+ 
+-	wait_for_completion(&bp->mdio_complete);
++	/* wait for end of transfer */
++	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
++		cpu_relax();
+ 
+-	macb_disable_mdio(bp);
+-	mutex_unlock(&bp->mdio_mutex);
++	return 0;
+ }
+ 
+-static int macb_phy_probe(struct macb *bp)
++static int macb_mdio_reset(struct mii_bus *bus)
+ {
+-	int phy_address;
+-	u16 phyid1, phyid2;
++	return 0;
++}
+ 
+-	for (phy_address = 0; phy_address < 32; phy_address++) {
+-		phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1);
+-		phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2);
++static void macb_handle_link_change(struct net_device *dev)
++{
++	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
++	unsigned long flags;
+ 
+-		if (phyid1 != 0xffff && phyid1 != 0x0000
+-		    && phyid2 != 0xffff && phyid2 != 0x0000)
+-			break;
++	int status_change = 0;
++
++	spin_lock_irqsave(&bp->lock, flags);
++
++	if (phydev->link) {
++		if ((bp->speed != phydev->speed) ||
++		    (bp->duplex != phydev->duplex)) {
++			u32 reg;
++
++			reg = macb_readl(bp, NCFGR);
++			reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
++
++			if (phydev->duplex)
++				reg |= MACB_BIT(FD);
++			if (phydev->speed)
++				reg |= MACB_BIT(SPD);
++
++			macb_writel(bp, NCFGR, reg);
++
++			bp->speed = phydev->speed;
++			bp->duplex = phydev->duplex;
++			status_change = 1;
++		}
+ 	}
+ 
+-	if (phy_address == 32)
+-		return -ENODEV;
++	if (phydev->link != bp->link) {
++		if (phydev->link)
++			netif_schedule(dev);
++		else {
++			bp->speed = 0;
++			bp->duplex = -1;
++		}
++		bp->link = phydev->link;
+ 
+-	dev_info(&bp->pdev->dev,
+-		 "detected PHY at address %d (ID %04x:%04x)\n",
+-		 phy_address, phyid1, phyid2);
++		status_change = 1;
++	}
+ 
+-	bp->mii.phy_id = phy_address;
+-	return 0;
++	spin_unlock_irqrestore(&bp->lock, flags);
++
++	if (status_change) {
++		if (phydev->link)
++			printk(KERN_INFO "%s: link up (%d/%s)\n",
++			       dev->name, phydev->speed,
++			       DUPLEX_FULL == phydev->duplex ? "Full":"Half");
++		else
++			printk(KERN_INFO "%s: link down\n", dev->name);
++	}
+ }
+ 
+-static void macb_set_media(struct macb *bp, int media)
++/* based on au1000_eth. c*/
++static int macb_mii_probe(struct net_device *dev)
+ {
+-	u32 reg;
++	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	struct eth_platform_data *pdata;
++	int phy_addr;
+ 
+-	spin_lock_irq(&bp->lock);
+-	reg = macb_readl(bp, NCFGR);
+-	reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+-	if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL))
+-		reg |= MACB_BIT(SPD);
+-	if (media & ADVERTISE_FULL)
+-		reg |= MACB_BIT(FD);
+-	macb_writel(bp, NCFGR, reg);
+-	spin_unlock_irq(&bp->lock);
++	/* find the first phy */
++	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++		if (bp->mii_bus.phy_map[phy_addr]) {
++			phydev = bp->mii_bus.phy_map[phy_addr];
++			break;
++		}
++	}
++
++	if (!phydev) {
++		printk (KERN_ERR "%s: no PHY found\n", dev->name);
++		return -1;
++	}
++
++	pdata = bp->pdev->dev.platform_data;
++	/* TODO : add pin_irq */
++
++	/* attach the mac to the phy */
++	if (pdata && pdata->is_rmii) {
++		phydev = phy_connect(dev, phydev->dev.bus_id,
++			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
++	} else {
++		phydev = phy_connect(dev, phydev->dev.bus_id,
++			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
++	}
++
++	if (IS_ERR(phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(phydev);
++	}
++
++	/* mask with MAC supported features */
++	phydev->supported &= PHY_BASIC_FEATURES;
++
++	phydev->advertising = phydev->supported;
++
++	bp->link = 0;
++	bp->speed = 0;
++	bp->duplex = -1;
++	bp->phy_dev = phydev;
++
++	return 0;
+ }
+ 
+-static void macb_check_media(struct macb *bp, int ok_to_print, int init_media)
++static int macb_mii_init(struct macb *bp)
+ {
+-	struct mii_if_info *mii = &bp->mii;
+-	unsigned int old_carrier, new_carrier;
+-	int advertise, lpa, media, duplex;
++	struct eth_platform_data *pdata;
++	int err = -ENXIO, i;
+ 
+-	/* if forced media, go no further */
+-	if (mii->force_media)
+-		return;
++	/* Enable managment port */
++	macb_writel(bp, NCR, MACB_BIT(MPE));
+ 
+-	/* check current and old link status */
+-	old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
+-	new_carrier = (unsigned int) mii_link_ok(mii);
++	bp->mii_bus.name = "MACB_mii_bus",
++	bp->mii_bus.read = &macb_mdio_read,
++	bp->mii_bus.write = &macb_mdio_write,
++	bp->mii_bus.reset = &macb_mdio_reset,
++	bp->mii_bus.id = bp->pdev->id,
++	bp->mii_bus.priv = bp,
++	bp->mii_bus.dev = &bp->dev->dev;
++	pdata = bp->pdev->dev.platform_data;
+ 
+-	/* if carrier state did not change, assume nothing else did */
+-	if (!init_media && old_carrier == new_carrier)
+-		return;
++	if (pdata)
++		bp->mii_bus.phy_mask = pdata->phy_mask;
+ 
+-	/* no carrier, nothing much to do */
+-	if (!new_carrier) {
+-		netif_carrier_off(mii->dev);
+-		printk(KERN_INFO "%s: link down\n", mii->dev->name);
+-		return;
++	bp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
++	if (!bp->mii_bus.irq) {
++		err = -ENOMEM;
++		goto err_out;
+ 	}
+ 
+-	/*
+-	 * we have carrier, see who's on the other end
+-	 */
+-	netif_carrier_on(mii->dev);
++	for (i = 0; i < PHY_MAX_ADDR; i++)
++		bp->mii_bus.irq[i] = PHY_POLL;
+ 
+-	/* get MII advertise and LPA values */
+-	if (!init_media && mii->advertising) {
+-		advertise = mii->advertising;
+-	} else {
+-		advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
+-		mii->advertising = advertise;
+-	}
+-	lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
++	platform_set_drvdata(bp->dev, &bp->mii_bus);
+ 
+-	/* figure out media and duplex from advertise and LPA values */
+-	media = mii_nway_result(lpa & advertise);
+-	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
++	if (mdiobus_register(&bp->mii_bus))
++		goto err_out_free_mdio_irq;
+ 
+-	if (ok_to_print)
+-		printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
+-		       mii->dev->name,
+-		       media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
+-		       duplex ? "full" : "half", lpa);
++	if (macb_mii_probe(bp->dev) != 0) {
++		goto err_out_unregister_bus;
++	}
+ 
+-	mii->full_duplex = duplex;
++	return 0;
+ 
+-	/* Let the MAC know about the new link state */
+-	macb_set_media(bp, media);
++err_out_unregister_bus:
++	mdiobus_unregister(&bp->mii_bus);
++err_out_free_mdio_irq:
++	kfree(bp->mii_bus.irq);
++err_out:
++	return err;
+ }
+ 
+ static void macb_update_stats(struct macb *bp)
+@@ -265,16 +296,6 @@ static void macb_update_stats(struct macb *bp)
+ 		*p += __raw_readl(reg);
+ }
+ 
+-static void macb_periodic_task(struct work_struct *work)
+-{
+-	struct macb *bp = container_of(work, struct macb, periodic_task.work);
+-
+-	macb_update_stats(bp);
+-	macb_check_media(bp, 1, 0);
+-
+-	schedule_delayed_work(&bp->periodic_task, HZ);
+-}
+-
+ static void macb_tx(struct macb *bp)
+ {
+ 	unsigned int tail;
+@@ -519,9 +540,6 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
+ 	spin_lock(&bp->lock);
+ 
+ 	while (status) {
+-		if (status & MACB_BIT(MFD))
+-			complete(&bp->mdio_complete);
+-
+ 		/* close possible race with dev_close */
+ 		if (unlikely(!netif_running(dev))) {
+ 			macb_writel(bp, IDR, ~0UL);
+@@ -535,7 +553,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
+ 				 * until we have processed the buffers
+ 				 */
+ 				macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
+-				dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n");
++				dev_dbg(&bp->pdev->dev,
++					"scheduling RX softirq\n");
+ 				__netif_rx_schedule(dev);
+ 			}
+ 		}
+@@ -765,7 +784,7 @@ static void macb_init_hw(struct macb *bp)
+ 	macb_writel(bp, TBQP, bp->tx_ring_dma);
+ 
+ 	/* Enable TX and RX */
+-	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE));
++	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
+ 
+ 	/* Enable interrupts */
+ 	macb_writel(bp, IER, (MACB_BIT(RCOMP)
+@@ -776,18 +795,126 @@ static void macb_init_hw(struct macb *bp)
+ 			      | MACB_BIT(TCOMP)
+ 			      | MACB_BIT(ISR_ROVR)
+ 			      | MACB_BIT(HRESP)));
++
+ }
+ 
+-static void macb_init_phy(struct net_device *dev)
++/*
++ * The hash address register is 64 bits long and takes up two
++ * locations in the memory map.  The least significant bits are stored
++ * in EMAC_HSL and the most significant bits in EMAC_HSH.
++ *
++ * The unicast hash enable and the multicast hash enable bits in the
++ * network configuration register enable the reception of hash matched
++ * frames. The destination address is reduced to a 6 bit index into
++ * the 64 bit hash register using the following hash function.  The
++ * hash function is an exclusive or of every sixth bit of the
++ * destination address.
++ *
++ * hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
++ * hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
++ * hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
++ * hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
++ * hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
++ * hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
++ *
++ * da[0] represents the least significant bit of the first byte
++ * received, that is, the multicast/unicast indicator, and da[47]
++ * represents the most significant bit of the last byte received.  If
++ * the hash index, hi[n], points to a bit that is set in the hash
++ * register then the frame will be matched according to whether the
++ * frame is multicast or unicast.  A multicast match will be signalled
++ * if the multicast hash enable bit is set, da[0] is 1 and the hash
++ * index points to a bit set in the hash register.  A unicast match
++ * will be signalled if the unicast hash enable bit is set, da[0] is 0
++ * and the hash index points to a bit set in the hash register.  To
++ * receive all multicast frames, the hash register should be set with
++ * all ones and the multicast hash enable bit should be set in the
++ * network configuration register.
++ */
++
++static inline int hash_bit_value(int bitnr, __u8 *addr)
+ {
++	if (addr[bitnr / 8] & (1 << (bitnr % 8)))
++		return 1;
++	return 0;
++}
++
++/*
++ * Return the hash index value for the specified address.
++ */
++static int hash_get_index(__u8 *addr)
++{
++	int i, j, bitval;
++	int hash_index = 0;
++
++	for (j = 0; j < 6; j++) {
++		for (i = 0, bitval = 0; i < 8; i++)
++			bitval ^= hash_bit_value(i*6 + j, addr);
++
++		hash_index |= (bitval << j);
++	}
++
++	return hash_index;
++}
++
++/*
++ * Add multicast addresses to the internal multicast-hash table.
++ */
++static void macb_sethashtable(struct net_device *dev)
++{
++	struct dev_mc_list *curr;
++	unsigned long mc_filter[2];
++	unsigned int i, bitnr;
++	struct macb *bp = netdev_priv(dev);
++
++	mc_filter[0] = mc_filter[1] = 0;
++
++	curr = dev->mc_list;
++	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
++		if (!curr) break;	/* unexpected end of list */
++
++		bitnr = hash_get_index(curr->dmi_addr);
++		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
++	}
++
++	macb_writel(bp, HRB, mc_filter[0]);
++	macb_writel(bp, HRT, mc_filter[1]);
++}
++
++/*
++ * Enable/Disable promiscuous and multicast modes.
++ */
++static void macb_set_rx_mode(struct net_device *dev)
++{
++	unsigned long cfg;
+ 	struct macb *bp = netdev_priv(dev);
+ 
+-	/* Set some reasonable default settings */
+-	macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
+-			ADVERTISE_CSMA | ADVERTISE_ALL);
+-	macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
+-			(BMCR_SPEED100 | BMCR_ANENABLE
+-			 | BMCR_ANRESTART | BMCR_FULLDPLX));
++	cfg = macb_readl(bp, NCFGR);
++
++	if (dev->flags & IFF_PROMISC)
++		/* Enable promiscuous mode */
++		cfg |= MACB_BIT(CAF);
++	else if (dev->flags & (~IFF_PROMISC))
++		 /* Disable promiscuous mode */
++		cfg &= ~MACB_BIT(CAF);
++
++	if (dev->flags & IFF_ALLMULTI) {
++		/* Enable all multicast mode */
++		macb_writel(bp, HRB, -1);
++		macb_writel(bp, HRT, -1);
++		cfg |= MACB_BIT(NCFGR_MTI);
++	} else if (dev->mc_count > 0) {
++		/* Enable specific multicasts */
++		macb_sethashtable(dev);
++		cfg |= MACB_BIT(NCFGR_MTI);
++	} else if (dev->flags & (~IFF_ALLMULTI)) {
++		/* Disable all multicast mode */
++		macb_writel(bp, HRB, 0);
++		macb_writel(bp, HRT, 0);
++		cfg &= ~MACB_BIT(NCFGR_MTI);
++	}
++
++	macb_writel(bp, NCFGR, cfg);
+ }
+ 
+ static int macb_open(struct net_device *dev)
+@@ -797,6 +924,10 @@ static int macb_open(struct net_device *dev)
+ 
+ 	dev_dbg(&bp->pdev->dev, "open\n");
+ 
++	/* if the phy is not yet register, retry later*/
++	if (!bp->phy_dev)
++		return -EAGAIN;
++
+ 	if (!is_valid_ether_addr(dev->dev_addr))
+ 		return -EADDRNOTAVAIL;
+ 
+@@ -810,12 +941,11 @@ static int macb_open(struct net_device *dev)
+ 
+ 	macb_init_rings(bp);
+ 	macb_init_hw(bp);
+-	macb_init_phy(dev);
+ 
+-	macb_check_media(bp, 1, 1);
+-	netif_start_queue(dev);
++	/* schedule a link state check */
++	phy_start(bp->phy_dev);
+ 
+-	schedule_delayed_work(&bp->periodic_task, HZ);
++	netif_start_queue(dev);
+ 
+ 	return 0;
+ }
+@@ -825,10 +955,11 @@ static int macb_close(struct net_device *dev)
+ 	struct macb *bp = netdev_priv(dev);
+ 	unsigned long flags;
+ 
+-	cancel_rearming_delayed_work(&bp->periodic_task);
+-
+ 	netif_stop_queue(dev);
+ 
++	if (bp->phy_dev)
++		phy_stop(bp->phy_dev);
++
+ 	spin_lock_irqsave(&bp->lock, flags);
+ 	macb_reset_hw(bp);
+ 	netif_carrier_off(dev);
+@@ -845,6 +976,9 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
+ 	struct net_device_stats *nstat = &bp->stats;
+ 	struct macb_stats *hwstat = &bp->hw_stats;
+ 
++	/* read stats from hardware */
++	macb_update_stats(bp);
++
+ 	/* Convert HW stats into netdevice stats */
+ 	nstat->rx_errors = (hwstat->rx_fcs_errors +
+ 			    hwstat->rx_align_errors +
+@@ -882,18 +1016,27 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
+ static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
+ 
+-	return mii_ethtool_gset(&bp->mii, cmd);
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_gset(phydev, cmd);
+ }
+ 
+ static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
+ 
+-	return mii_ethtool_sset(&bp->mii, cmd);
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_sset(phydev, cmd);
+ }
+ 
+-static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++static void macb_get_drvinfo(struct net_device *dev,
++			     struct ethtool_drvinfo *info)
+ {
+ 	struct macb *bp = netdev_priv(dev);
+ 
+@@ -902,104 +1045,34 @@ static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *inf
+ 	strcpy(info->bus_info, bp->pdev->dev.bus_id);
+ }
+ 
+-static int macb_nway_reset(struct net_device *dev)
+-{
+-	struct macb *bp = netdev_priv(dev);
+-	return mii_nway_restart(&bp->mii);
+-}
+-
+ static struct ethtool_ops macb_ethtool_ops = {
+ 	.get_settings		= macb_get_settings,
+ 	.set_settings		= macb_set_settings,
+ 	.get_drvinfo		= macb_get_drvinfo,
+-	.nway_reset		= macb_nway_reset,
+ 	.get_link		= ethtool_op_get_link,
+ };
+ 
+ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ 	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
+ 
+ 	if (!netif_running(dev))
+ 		return -EINVAL;
+ 
+-	return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
+-}
+-
+-static ssize_t macb_mii_show(const struct device *_dev, char *buf,
+-			unsigned long addr)
+-{
+-	struct net_device *dev = to_net_dev(_dev);
+-	struct macb *bp = netdev_priv(dev);
+-	ssize_t ret = -EINVAL;
+-
+-	if (netif_running(dev)) {
+-		int value;
+-		value = macb_mdio_read(dev, bp->mii.phy_id, addr);
+-		ret = sprintf(buf, "0x%04x\n", (uint16_t)value);
+-	}
+-
+-	return ret;
+-}
+-
+-#define MII_ENTRY(name, addr)					\
+-static ssize_t show_##name(struct device *_dev,			\
+-			   struct device_attribute *attr,	\
+-			   char *buf)				\
+-{								\
+-	return macb_mii_show(_dev, buf, addr);			\
+-}								\
+-static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+-
+-MII_ENTRY(bmcr, MII_BMCR);
+-MII_ENTRY(bmsr, MII_BMSR);
+-MII_ENTRY(physid1, MII_PHYSID1);
+-MII_ENTRY(physid2, MII_PHYSID2);
+-MII_ENTRY(advertise, MII_ADVERTISE);
+-MII_ENTRY(lpa, MII_LPA);
+-MII_ENTRY(expansion, MII_EXPANSION);
+-
+-static struct attribute *macb_mii_attrs[] = {
+-	&dev_attr_bmcr.attr,
+-	&dev_attr_bmsr.attr,
+-	&dev_attr_physid1.attr,
+-	&dev_attr_physid2.attr,
+-	&dev_attr_advertise.attr,
+-	&dev_attr_lpa.attr,
+-	&dev_attr_expansion.attr,
+-	NULL,
+-};
+-
+-static struct attribute_group macb_mii_group = {
+-	.name	= "mii",
+-	.attrs	= macb_mii_attrs,
+-};
+-
+-static void macb_unregister_sysfs(struct net_device *net)
+-{
+-	struct device *_dev = &net->dev;
++	if (!phydev)
++		return -ENODEV;
+ 
+-	sysfs_remove_group(&_dev->kobj, &macb_mii_group);
++	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+ }
+ 
+-static int macb_register_sysfs(struct net_device *net)
+-{
+-	struct device *_dev = &net->dev;
+-	int ret;
+-
+-	ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
+-	if (ret)
+-		printk(KERN_WARNING
+-		       "%s: sysfs mii attribute registration failed: %d\n",
+-		       net->name, ret);
+-	return ret;
+-}
+ static int __devinit macb_probe(struct platform_device *pdev)
+ {
+ 	struct eth_platform_data *pdata;
+ 	struct resource *regs;
+ 	struct net_device *dev;
+ 	struct macb *bp;
++	struct phy_device *phydev;
+ 	unsigned long pclk_hz;
+ 	u32 config;
+ 	int err = -ENXIO;
+@@ -1073,6 +1146,7 @@ static int __devinit macb_probe(struct platform_device *pdev)
+ 	dev->stop = macb_close;
+ 	dev->hard_start_xmit = macb_start_xmit;
+ 	dev->get_stats = macb_get_stats;
++	dev->set_multicast_list = macb_set_rx_mode;
+ 	dev->do_ioctl = macb_ioctl;
+ 	dev->poll = macb_poll;
+ 	dev->weight = 64;
+@@ -1080,10 +1154,6 @@ static int __devinit macb_probe(struct platform_device *pdev)
+ 
+ 	dev->base_addr = regs->start;
+ 
+-	INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
+-	mutex_init(&bp->mdio_mutex);
+-	init_completion(&bp->mdio_complete);
+-
+ 	/* Set MII management clock divider */
+ 	pclk_hz = clk_get_rate(bp->pclk);
+ 	if (pclk_hz <= 20000000)
+@@ -1096,20 +1166,9 @@ static int __devinit macb_probe(struct platform_device *pdev)
+ 		config = MACB_BF(CLK, MACB_CLK_DIV64);
+ 	macb_writel(bp, NCFGR, config);
+ 
+-	bp->mii.dev = dev;
+-	bp->mii.mdio_read = macb_mdio_read;
+-	bp->mii.mdio_write = macb_mdio_write;
+-	bp->mii.phy_id_mask = 0x1f;
+-	bp->mii.reg_num_mask = 0x1f;
+-
+ 	macb_get_hwaddr(bp);
+-	err = macb_phy_probe(bp);
+-	if (err) {
+-		dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
+-		goto err_out_free_irq;
+-	}
+-
+ 	pdata = pdev->dev.platform_data;
++
+ 	if (pdata && pdata->is_rmii)
+ #if defined(CONFIG_ARCH_AT91)
+ 		macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+@@ -1131,9 +1190,11 @@ static int __devinit macb_probe(struct platform_device *pdev)
+ 		goto err_out_free_irq;
+ 	}
+ 
+-	platform_set_drvdata(pdev, dev);
++	if (macb_mii_init(bp) != 0) {
++		goto err_out_unregister_netdev;
++	}
+ 
+-	macb_register_sysfs(dev);
++	platform_set_drvdata(pdev, dev);
+ 
+ 	printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
+ 	       "(%02x:%02x:%02x:%02x:%02x:%02x)\n",
+@@ -1141,8 +1202,15 @@ static int __devinit macb_probe(struct platform_device *pdev)
+ 	       dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ 	       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ 
++	phydev = bp->phy_dev;
++	printk(KERN_INFO "%s: attached PHY driver [%s] "
++		"(mii_bus:phy_addr=%s, irq=%d)\n",
++		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
++
+ 	return 0;
+ 
++err_out_unregister_netdev:
++	unregister_netdev(dev);
+ err_out_free_irq:
+ 	free_irq(dev->irq, dev);
+ err_out_iounmap:
+@@ -1153,7 +1221,9 @@ err_out_disable_clocks:
+ 	clk_put(bp->hclk);
+ #endif
+ 	clk_disable(bp->pclk);
++#ifndef CONFIG_ARCH_AT91
+ err_out_put_pclk:
++#endif
+ 	clk_put(bp->pclk);
+ err_out_free_dev:
+ 	free_netdev(dev);
+@@ -1171,7 +1241,8 @@ static int __devexit macb_remove(struct platform_device *pdev)
+ 
+ 	if (dev) {
+ 		bp = netdev_priv(dev);
+-		macb_unregister_sysfs(dev);
++		mdiobus_unregister(&bp->mii_bus);
++		kfree(bp->mii_bus.irq);
+ 		unregister_netdev(dev);
+ 		free_irq(dev->irq, dev);
+ 		iounmap(bp->regs);
+diff --git a/drivers/net/macb.h b/drivers/net/macb.h
+index b3bb218..4e3283e 100644
+--- a/drivers/net/macb.h
++++ b/drivers/net/macb.h
+@@ -383,11 +383,11 @@ struct macb {
+ 
+ 	unsigned int		rx_pending, tx_pending;
+ 
+-	struct delayed_work	periodic_task;
+-
+-	struct mutex		mdio_mutex;
+-	struct completion	mdio_complete;
+-	struct mii_if_info	mii;
++	struct mii_bus		mii_bus;
++	struct phy_device	*phy_dev;
++	unsigned int 		link;
++	unsigned int 		speed;
++	unsigned int 		duplex;
+ };
+ 
+ #endif /* _MACB_H */
+diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
+index 4e4c10a..6d014fb 100644
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -379,6 +379,13 @@ config RTC_DRV_PL031
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called rtc-pl031.
+ 
++config RTC_DRV_AT32AP700X
++	tristate "AT32AP700X series RTC"
++	depends on RTC_CLASS && PLATFORM_AT32AP
++	help
++	  Driver for the internal RTC (Realtime Clock) on Atmel AVR32
++	  AT32AP700x family processors.
++
+ config RTC_DRV_AT91RM9200
+ 	tristate "AT91RM9200"
+ 	depends on RTC_CLASS && ARCH_AT91RM9200
+diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
+index a1afbc2..5fb1c10 100644
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
+ obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+ obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
+ obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
++obj-$(CONFIG_RTC_DRV_AT32AP700X)	+= rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
+ obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
+ obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
+diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
+new file mode 100644
+index 0000000..2999214
+--- /dev/null
++++ b/drivers/rtc/rtc-at32ap700x.c
+@@ -0,0 +1,317 @@
++/*
++ * An RTC driver for the AVR32 AT32AP700x processor series.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/io.h>
++
++/*
++ * This is a bare-bones RTC. It runs during most system sleep states, but has
++ * no battery backup and gets reset during system restart.  It must be
++ * initialized from an external clock (network, I2C, etc) before it can be of
++ * much use.
++ *
++ * The alarm functionality is limited by the hardware, not supporting
++ * periodic interrupts.
++ */
++
++#define RTC_CTRL		0x00
++#define RTC_CTRL_EN		   0
++#define RTC_CTRL_PCLR		   1
++#define RTC_CTRL_TOPEN		   2
++#define RTC_CTRL_PSEL		   8
++
++#define RTC_VAL			0x04
++
++#define RTC_TOP			0x08
++
++#define RTC_IER			0x10
++#define RTC_IER_TOPI		   0
++
++#define RTC_IDR			0x14
++#define RTC_IDR_TOPI		   0
++
++#define RTC_IMR			0x18
++#define RTC_IMR_TOPI		   0
++
++#define RTC_ISR			0x1c
++#define RTC_ISR_TOPI		   0
++
++#define RTC_ICR			0x20
++#define RTC_ICR_TOPI		   0
++
++#define RTC_BIT(name)		(1 << RTC_##name)
++#define RTC_BF(name, value)	((value) << RTC_##name)
++
++#define rtc_readl(dev, reg)				\
++	__raw_readl((dev)->regs + RTC_##reg)
++#define rtc_writel(dev, reg, value)			\
++	__raw_writel((value), (dev)->regs + RTC_##reg)
++
++struct rtc_at32ap700x {
++	struct rtc_device	*rtc;
++	void __iomem		*regs;
++	unsigned long		alarm_time;
++	unsigned long		irq;
++	/* Protect against concurrent register access. */
++	spinlock_t		lock;
++};
++
++static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
++{
++	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++	unsigned long now;
++
++	now = rtc_readl(rtc, VAL);
++	rtc_time_to_tm(now, tm);
++
++	return 0;
++}
++
++static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
++{
++	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++	unsigned long now;
++	int ret;
++
++	ret = rtc_tm_to_time(tm, &now);
++	if (ret == 0)
++		rtc_writel(rtc, VAL, now);
++
++	return ret;
++}
++
++static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++
++	rtc_time_to_tm(rtc->alarm_time, &alrm->time);
++	alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
++
++	return 0;
++}
++
++static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++	unsigned long rtc_unix_time;
++	unsigned long alarm_unix_time;
++	int ret;
++
++	rtc_unix_time = rtc_readl(rtc, VAL);
++
++	ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
++	if (ret)
++		return ret;
++
++	if (alarm_unix_time < rtc_unix_time)
++		return -EINVAL;
++
++	spin_lock_irq(&rtc->lock);
++	rtc->alarm_time = alarm_unix_time;
++	rtc_writel(rtc, TOP, rtc->alarm_time);
++	if (alrm->pending)
++		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++				| RTC_BIT(CTRL_TOPEN));
++	else
++		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++				& ~RTC_BIT(CTRL_TOPEN));
++	spin_unlock_irq(&rtc->lock);
++
++	return ret;
++}
++
++static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
++			unsigned long arg)
++{
++	struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++	int ret = 0;
++
++	spin_lock_irq(&rtc->lock);
++
++	switch (cmd) {
++	case RTC_AIE_ON:
++		if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
++			ret = -EINVAL;
++			break;
++		}
++		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++				| RTC_BIT(CTRL_TOPEN));
++		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++		rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
++		break;
++	case RTC_AIE_OFF:
++		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++				& ~RTC_BIT(CTRL_TOPEN));
++		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++		break;
++	default:
++		ret = -ENOIOCTLCMD;
++		break;
++	}
++
++	spin_unlock_irq(&rtc->lock);
++
++	return ret;
++}
++
++static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
++{
++	struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
++	unsigned long isr = rtc_readl(rtc, ISR);
++	unsigned long events = 0;
++	int ret = IRQ_NONE;
++
++	spin_lock(&rtc->lock);
++
++	if (isr & RTC_BIT(ISR_TOPI)) {
++		rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++		rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++				& ~RTC_BIT(CTRL_TOPEN));
++		rtc_writel(rtc, VAL, rtc->alarm_time);
++		events = RTC_AF | RTC_IRQF;
++		rtc_update_irq(rtc->rtc, 1, events);
++		ret = IRQ_HANDLED;
++	}
++
++	spin_unlock(&rtc->lock);
++
++	return ret;
++}
++
++static struct rtc_class_ops at32_rtc_ops = {
++	.ioctl		= at32_rtc_ioctl,
++	.read_time	= at32_rtc_readtime,
++	.set_time	= at32_rtc_settime,
++	.read_alarm	= at32_rtc_readalarm,
++	.set_alarm	= at32_rtc_setalarm,
++};
++
++static int __init at32_rtc_probe(struct platform_device *pdev)
++{
++	struct resource	*regs;
++	struct rtc_at32ap700x *rtc;
++	int irq = -1;
++	int ret;
++
++	rtc = kzalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
++	if (!rtc) {
++		dev_dbg(&pdev->dev, "out of memory\n");
++		return -ENOMEM;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "no mmio resource defined\n");
++		ret = -ENXIO;
++		goto out;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_dbg(&pdev->dev, "could not get irq\n");
++		ret = -ENXIO;
++		goto out;
++	}
++
++	ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
++		goto out;
++	}
++
++	rtc->irq = irq;
++	rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!rtc->regs) {
++		ret = -ENOMEM;
++		dev_dbg(&pdev->dev, "could not map I/O memory\n");
++		goto out_free_irq;
++	}
++	spin_lock_init(&rtc->lock);
++
++	/*
++	 * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
++	 *
++	 * Do not reset VAL register, as it can hold an old time
++	 * from last JTAG reset.
++	 */
++	if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
++		rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
++		rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++		rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
++				| RTC_BIT(CTRL_EN));
++	}
++
++	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
++				&at32_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc->rtc)) {
++		dev_dbg(&pdev->dev, "could not register rtc device\n");
++		ret = PTR_ERR(rtc->rtc);
++		goto out_iounmap;
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
++			(unsigned long)rtc->regs, rtc->irq);
++
++	return 0;
++
++out_iounmap:
++	iounmap(rtc->regs);
++out_free_irq:
++	free_irq(irq, rtc);
++out:
++	kfree(rtc);
++	return ret;
++}
++
++static int __exit at32_rtc_remove(struct platform_device *pdev)
++{
++	struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
++
++	free_irq(rtc->irq, rtc);
++	iounmap(rtc->regs);
++	rtc_device_unregister(rtc->rtc);
++	kfree(rtc);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++MODULE_ALIAS("at32ap700x_rtc");
++
++static struct platform_driver at32_rtc_driver = {
++	.remove		= __exit_p(at32_rtc_remove),
++	.driver		= {
++		.name	= "at32ap700x_rtc",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at32_rtc_init(void)
++{
++	return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
++}
++module_init(at32_rtc_init);
++
++static void __exit at32_rtc_exit(void)
++{
++	platform_driver_unregister(&at32_rtc_driver);
++}
++module_exit(at32_rtc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
+index 3320bcd..4d6b3c5 100644
+--- a/drivers/serial/atmel_serial.c
++++ b/drivers/serial/atmel_serial.c
+@@ -114,6 +114,7 @@ struct atmel_uart_port {
+ 	struct uart_port	uart;		/* uart */
+ 	struct clk		*clk;		/* uart clock */
+ 	unsigned short		suspended;	/* is port suspended? */
++	int			break_active;	/* break being received */
+ };
+ 
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
+  */
+ static void atmel_rx_chars(struct uart_port *port)
+ {
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 	struct tty_struct *tty = port->info->tty;
+ 	unsigned int status, ch, flg;
+ 
+@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
+ 		 * note that the error handling code is
+ 		 * out of the main execution path
+ 		 */
+-		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
++		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
++				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
++			     || atmel_port->break_active)) {
+ 			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
+-			if (status & ATMEL_US_RXBRK) {
++			if (status & ATMEL_US_RXBRK
++			    && !atmel_port->break_active) {
+ 				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
+ 				port->icount.brk++;
++				atmel_port->break_active = 1;
++				UART_PUT_IER(port, ATMEL_US_RXBRK);
+ 				if (uart_handle_break(port))
+ 					goto ignore_char;
++			} else {
++				/*
++				 * This is either the end-of-break
++				 * condition or we've received at
++				 * least one character without RXBRK
++				 * being set. In both cases, the next
++				 * RXBRK will indicate start-of-break.
++				 */
++				UART_PUT_IDR(port, ATMEL_US_RXBRK);
++				status &= ~ATMEL_US_RXBRK;
++				atmel_port->break_active = 0;
+ 			}
+ 			if (status & ATMEL_US_PARE)
+ 				port->icount.parity++;
+@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+ 		/* Interrupt receive */
+ 		if (pending & ATMEL_US_RXRDY)
+ 			atmel_rx_chars(port);
++		else if (pending & ATMEL_US_RXBRK) {
++			/*
++			 * End of break detected. If it came along
++			 * with a character, atmel_rx_chars will
++			 * handle it.
++			 */
++			UART_PUT_CR(port, ATMEL_US_RSTSTA);
++			UART_PUT_IDR(port, ATMEL_US_RXBRK);
++			atmel_port->break_active = 0;
++		}
+ 
+ 		// TODO: All reads to CSR will clear these interrupts!
+ 		if (pending & ATMEL_US_RIIC) port->icount.rng++;
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index 8b2601d..8f5453f 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -412,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
+ 		csr |= SPI_BIT(NCPHA);
+ 
+ 	/* TODO: DLYBS and DLYBCT */
+-	csr |= SPI_BF(DLYBS, 10);
+-	csr |= SPI_BF(DLYBCT, 10);
++	csr |= SPI_BF(DLYBS, 0);
++	csr |= SPI_BF(DLYBCT, 0);
+ 
+ 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ 	npcs_pin = (unsigned int)spi->controller_data;
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index f771a7c..0c3d55b 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -175,6 +175,19 @@ config USB_LH7A40X
+ 	default USB_GADGET
+ 	select USB_GADGET_SELECTED
+ 
++config USB_GADGET_ATMEL_USBA
++	boolean "Atmel USBA"
++	select USB_GADGET_DUALSPEED
++	depends on AVR32
++	help
++	  USBA is the integrated high-speed USB Device controller on
++	  the AT32AP700x processors from Atmel.
++
++config USB_ATMEL_USBA
++	tristate
++	depends on USB_GADGET_ATMEL_USBA
++	default USB_GADGET
++	select USB_GADGET_SELECTED
+ 
+ config USB_GADGET_OMAP
+ 	boolean "OMAP USB Device Controller"
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index 5db1939..c28da01 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
+ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
+ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
++obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+ 
+ #
+diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
+new file mode 100644
+index 0000000..34dbae3
+--- /dev/null
++++ b/drivers/usb/gadget/atmel_usba_udc.c
+@@ -0,0 +1,2072 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++/* #define DEBUG */
++
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb_gadget.h>
++#include <linux/delay.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/board.h>
++
++#include "atmel_usba_udc.h"
++
++#define DMA_ADDR_INVALID (~(dma_addr_t)0)
++
++#define FIFO_IOMEM_ID	0
++#define CTRL_IOMEM_ID	1
++
++#ifdef DEBUG
++#define DBG_ERR		0x0001	/* report all error returns */
++#define DBG_HW		0x0002	/* debug hardware initialization */
++#define DBG_GADGET	0x0004	/* calls to/from gadget driver */
++#define DBG_INT		0x0008	/* interrupts */
++#define DBG_BUS		0x0010	/* report changes in bus state */
++#define DBG_QUEUE	0x0020  /* debug request queue processing */
++#define DBG_FIFO	0x0040  /* debug FIFO contents */
++#define DBG_DMA		0x0080  /* debug DMA handling */
++#define DBG_REQ		0x0100	/* print out queued request length */
++#define DBG_ALL		0xffff
++#define DBG_NONE	0x0000
++
++#define DEBUG_LEVEL	(DBG_ERR)
++#define DBG(level, fmt, ...)					\
++	do {							\
++		if ((level) & DEBUG_LEVEL)			\
++			printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__);	\
++	} while (0)
++#else
++#define DBG(level, fmt...)
++#endif
++
++static struct usba_udc the_udc;
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/uaccess.h>
++
++static int queue_dbg_open(struct inode *inode, struct file *file)
++{
++	struct usba_ep *ep = inode->i_private;
++	struct usba_request *req, *req_copy;
++	struct list_head *queue_data;
++
++	queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
++	if (!queue_data)
++		return -ENOMEM;
++	INIT_LIST_HEAD(queue_data);
++
++	spin_lock_irq(&ep->udc->lock);
++	list_for_each_entry(req, &ep->queue, queue) {
++		req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
++		if (!req_copy)
++			goto fail;
++		memcpy(req_copy, req, sizeof(*req_copy));
++		list_add_tail(&req_copy->queue, queue_data);
++	}
++	spin_unlock_irq(&ep->udc->lock);
++
++	file->private_data = queue_data;
++	return 0;
++
++fail:
++	spin_unlock_irq(&ep->udc->lock);
++	list_for_each_entry_safe(req, req_copy, queue_data, queue) {
++		list_del(&req->queue);
++		kfree(req);
++	}
++	kfree(queue_data);
++	return -ENOMEM;
++}
++
++/*
++ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ *
++ * b: buffer address
++ * l: buffer length
++ * I/i: interrupt/no interrupt
++ * Z/z: zero/no zero
++ * S/s: short ok/short not ok
++ * s: status
++ * n: nr_packets
++ * F/f: submitted/not submitted to FIFO
++ * D/d: using/not using DMA
++ * L/l: last transaction/not last transaction
++ */
++static ssize_t queue_dbg_read(struct file *file, char __user *buf,
++			      size_t nbytes, loff_t *ppos)
++{
++	struct list_head *queue = file->private_data;
++	struct usba_request *req, *tmp_req;
++	size_t len, remaining, actual = 0;
++	char tmpbuf[38];
++
++	if (!access_ok(VERIFY_WRITE, buf, nbytes))
++		return -EFAULT;
++
++	mutex_lock(&file->f_dentry->d_inode->i_mutex);
++	list_for_each_entry_safe(req, tmp_req, queue, queue) {
++		len = snprintf(tmpbuf, sizeof(tmpbuf),
++			       "%8p %08x %c%c%c %5d %c%c%c\n",
++			       req->req.buf, req->req.length,
++			       req->req.no_interrupt ? 'i' : 'I',
++			       req->req.zero ? 'Z' : 'z',
++			       req->req.short_not_ok ? 's' : 'S',
++			       req->req.status,
++			       req->submitted ? 'F' : 'f',
++			       req->using_dma ? 'D' : 'd',
++			       req->last_transaction ? 'L' : 'l');
++		len = min(len, sizeof(tmpbuf));
++		if (len > nbytes)
++			break;
++
++		list_del(&req->queue);
++		kfree(req);
++
++		remaining = __copy_to_user(buf, tmpbuf, len);
++		actual += len - remaining;
++		if (remaining)
++			break;
++
++		nbytes -= len;
++		buf += len;
++	}
++	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++
++	return actual;
++}
++
++static int queue_dbg_release(struct inode *inode, struct file *file)
++{
++	struct list_head *queue_data = file->private_data;
++	struct usba_request *req, *tmp_req;
++
++	list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
++		list_del(&req->queue);
++		kfree(req);
++	}
++	kfree(queue_data);
++	return 0;
++}
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++	struct usba_udc *udc;
++	unsigned int i;
++	u32 *data;
++	int ret = -ENOMEM;
++
++	mutex_lock(&inode->i_mutex);
++	udc = inode->i_private;
++	data = kmalloc(inode->i_size, GFP_KERNEL);
++	if (!data)
++		goto out;
++
++	spin_lock_irq(&udc->lock);
++	for (i = 0; i < inode->i_size / 4; i++)
++		data[i] = __raw_readl(udc->regs + i * 4);
++	spin_unlock_irq(&udc->lock);
++
++	file->private_data = data;
++	ret = 0;
++
++out:
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++			     size_t nbytes, loff_t *ppos)
++{
++	struct inode *inode = file->f_dentry->d_inode;
++	int ret;
++
++	mutex_lock(&inode->i_mutex);
++	ret = simple_read_from_buffer(buf, nbytes, ppos,
++				       file->private_data,
++				       file->f_dentry->d_inode->i_size);
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++const struct file_operations queue_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= queue_dbg_open,
++	.llseek		= no_llseek,
++	.read		= queue_dbg_read,
++	.release	= queue_dbg_release,
++};
++
++const struct file_operations regs_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= regs_dbg_open,
++	.llseek		= generic_file_llseek,
++	.read		= regs_dbg_read,
++	.release	= regs_dbg_release,
++};
++
++static void usba_ep_init_debugfs(struct usba_udc *udc,
++				  struct usba_ep *ep)
++{
++	struct dentry *ep_root;
++
++	ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
++	if (!ep_root)
++		goto err_root;
++	ep->debugfs_dir = ep_root;
++
++	ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
++						ep, &queue_dbg_fops);
++	if (!ep->debugfs_queue)
++		goto err_queue;
++
++	if (ep_can_dma(ep)) {
++		ep->debugfs_dma_status
++			= debugfs_create_u32("dma_status", 0400, ep_root,
++					     &ep->last_dma_status);
++		if (!ep->debugfs_dma_status)
++			goto err_dma_status;
++	}
++	if (ep_is_control(ep)) {
++		ep->debugfs_state
++			= debugfs_create_u32("state", 0400, ep_root,
++					     &ep->state);
++		if (!ep->debugfs_state)
++			goto err_state;
++	}
++
++	return;
++
++err_state:
++	if (ep_can_dma(ep))
++		debugfs_remove(ep->debugfs_dma_status);
++err_dma_status:
++	debugfs_remove(ep->debugfs_queue);
++err_queue:
++	debugfs_remove(ep_root);
++err_root:
++	dev_err(&ep->udc->pdev->dev,
++		"failed to create debugfs directory for %s\n", ep_name(ep));
++}
++
++static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++	debugfs_remove(ep->debugfs_queue);
++	debugfs_remove(ep->debugfs_dma_status);
++	debugfs_remove(ep->debugfs_state);
++	debugfs_remove(ep->debugfs_dir);
++	ep->debugfs_dma_status = NULL;
++	ep->debugfs_dir = NULL;
++}
++
++static void usba_init_debugfs(struct usba_udc *udc)
++{
++	struct dentry *root, *regs;
++	struct resource *regs_resource;
++
++	root = debugfs_create_dir(udc->gadget.name, NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	udc->debugfs_root = root;
++
++	regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
++	if (!regs)
++		goto err_regs;
++
++	regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
++					      CTRL_IOMEM_ID);
++	regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
++	udc->debugfs_regs = regs;
++
++	usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
++
++	return;
++
++err_regs:
++	debugfs_remove(root);
++err_root:
++	udc->debugfs_root = NULL;
++	dev_err(&udc->pdev->dev, "debugfs is not available\n");
++}
++
++static void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++	usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
++	debugfs_remove(udc->debugfs_regs);
++	debugfs_remove(udc->debugfs_root);
++	udc->debugfs_regs = NULL;
++	udc->debugfs_root = NULL;
++}
++#else
++static inline void usba_ep_init_debugfs(struct usba_udc *udc,
++					 struct usba_ep *ep)
++{
++
++}
++
++static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++
++}
++
++static inline void usba_init_debugfs(struct usba_udc *udc)
++{
++
++}
++
++static inline void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++
++}
++#endif
++
++static int vbus_is_present(struct usba_udc *udc)
++{
++	if (udc->vbus_pin != -1)
++		return gpio_get_value(udc->vbus_pin);
++
++	/* No Vbus detection: Assume always present */
++	return 1;
++}
++
++static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
++{
++	unsigned long tmp;
++
++	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
++	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
++		tmp = *(unsigned long *)buf;
++		if (len >= 4) {
++			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
++			__raw_writel(tmp, fifo);
++		} else {
++			do {
++				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
++				__raw_writeb(tmp >> 24, fifo);
++				fifo++;
++				tmp <<= 8;
++			} while (--len);
++			break;
++		}
++	}
++}
++
++static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++{
++	union {
++		unsigned long *w;
++		unsigned char *b;
++	} p;
++	unsigned long tmp;
++
++	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
++	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
++		if (len >= 4) {
++			tmp = __raw_readl(fifo);
++			*p.w = tmp;
++			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
++		} else {
++			do {
++				tmp = __raw_readb(fifo);
++				*p.b = tmp;
++				DBG(DBG_FIFO, " -> %02lx\n", tmp);
++				fifo++, p.b++;
++			} while (--len);
++		}
++	}
++}
++
++static void next_fifo_transaction(struct usba_ep *ep,
++				  struct usba_request *req)
++{
++	unsigned int transaction_len;
++
++	transaction_len = req->req.length - req->req.actual;
++	req->last_transaction = 1;
++	if (transaction_len > ep->ep.maxpacket) {
++		transaction_len = ep->ep.maxpacket;
++		req->last_transaction = 0;
++	} else if (transaction_len == ep->ep.maxpacket
++		   && req->req.zero) {
++		req->last_transaction = 0;
++	}
++	DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
++	    ep_name(ep), req, transaction_len,
++	    req->last_transaction ? ", done" : "");
++
++	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
++	usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++	req->req.actual += transaction_len;
++}
++
++static void submit_request(struct usba_ep *ep, struct usba_request *req)
++{
++	DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
++	    ep_name(ep), req, req->req.length);
++
++	req->req.actual = 0;
++	req->submitted = 1;
++
++	if (req->using_dma) {
++		if (req->req.length == 0) {
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
++			return;
++		}
++
++		if (req->req.zero)
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(SHORT_PACKET));
++		else
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(SHORT_PACKET));
++
++		usba_dma_writel(ep, ADDRESS, req->req.dma);
++		usba_dma_writel(ep, CONTROL, req->ctrl);
++	} else {
++		next_fifo_transaction(ep, req);
++		if (req->last_transaction) {
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++		} else {
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
++		}
++	}
++}
++
++static void submit_next_request(struct usba_ep *ep)
++{
++	struct usba_request *req;
++
++	if (list_empty(&ep->queue)) {
++		usba_ep_writel(ep, CTL_DIS, (USBA_BIT(TX_PK_RDY)
++					      | USBA_BIT(RX_BK_RDY)));
++		return;
++	}
++
++	req = list_entry(ep->queue.next, struct usba_request, queue);
++	if (!req->submitted)
++		submit_request(ep, req);
++}
++
++static void send_status(struct usba_udc *udc, struct usba_ep *ep)
++{
++	ep->state = STATUS_STAGE_IN;
++	usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++	usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++}
++
++static void receive_data(struct usba_ep *ep)
++{
++	struct usba_udc *udc = ep->udc;
++	struct usba_request *req;
++	unsigned long status;
++	unsigned int bytecount, nr_busy;
++	int is_complete = 0;
++
++	status = usba_ep_readl(ep, STA);
++	nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++	DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
++
++	while (nr_busy > 0) {
++		if (list_empty(&ep->queue)) {
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++			break;
++		}
++		req = list_entry(ep->queue.next,
++				 struct usba_request, queue);
++
++		bytecount = USBA_BFEXT(BYTE_COUNT, status);
++
++		if (status & (1 << 31))
++			is_complete = 1;
++		if (req->req.actual + bytecount >= req->req.length) {
++			is_complete = 1;
++			bytecount = req->req.length - req->req.actual;
++		}
++
++		copy_from_fifo(req->req.buf + req->req.actual,
++			       ep->fifo, bytecount);
++		req->req.actual += bytecount;
++
++		usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++
++		if (is_complete) {
++			DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
++			req->req.status = 0;
++			list_del_init(&req->queue);
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++			req->req.complete(&ep->ep, &req->req);
++		}
++
++		status = usba_ep_readl(ep, STA);
++		nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++		if (is_complete && ep_is_control(ep)) {
++			send_status(udc, ep);
++			break;
++		}
++	}
++}
++
++static void request_complete(struct usba_ep *ep,
++			     struct usba_request *req,
++			     int status)
++{
++	struct usba_udc *udc = ep->udc;
++
++	WARN_ON(!list_empty(&req->queue));
++
++	if (req->req.status == -EINPROGRESS)
++		req->req.status = status;
++
++	if (req->mapped) {
++		dma_unmap_single(
++			&udc->pdev->dev, req->req.dma, req->req.length,
++			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++		req->req.dma = DMA_ADDR_INVALID;
++		req->mapped = 0;
++	}
++
++	DBG(DBG_GADGET | DBG_REQ,
++	    "%s: req %p complete: status %d, actual %u\n",
++	    ep_name(ep), req, req->req.status, req->req.actual);
++	req->req.complete(&ep->ep, &req->req);
++}
++
++static void request_complete_list(struct usba_ep *ep,
++				  struct list_head *list,
++				  int status)
++{
++	struct usba_request *req, *tmp_req;
++
++	list_for_each_entry_safe(req, tmp_req, list, queue) {
++		list_del_init(&req->queue);
++		request_complete(ep, req, status);
++	}
++}
++
++static int usba_ep_enable(struct usb_ep *_ep,
++			   const struct usb_endpoint_descriptor *desc)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	unsigned long flags, ept_cfg, maxpacket;
++
++	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
++
++	maxpacket = le16_to_cpu(desc->wMaxPacketSize);
++
++	if (ep->index == 0
++	    || desc->bDescriptorType != USB_DT_ENDPOINT
++	    || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
++		!= ep->index)
++	    || maxpacket == 0
++	    || maxpacket > ep->fifo_size) {
++		DBG(DBG_ERR, "ep_enable: Invalid argument");
++		return -EINVAL;
++	}
++
++	ep->is_isoc = 0;
++	ep->is_in = 0;
++
++	if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
++	    == USB_ENDPOINT_XFER_ISOC) {
++		    if (!ep->can_isoc) {
++			    DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
++				ep_name(ep));
++			    return -EINVAL;
++		    }
++		    ep->is_isoc = 1;
++	}
++
++	if (maxpacket <= 8)
++		ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
++	else
++		/* LSB is bit 1, not 0 */
++		ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
++	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
++	    ep_name(ep), ept_cfg, maxpacket);
++
++	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
++		ep->is_in = 1;
++		ept_cfg |= USBA_BIT(EPT_DIR);
++	}
++
++	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++	case USB_ENDPOINT_XFER_CONTROL:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
++		break;
++	case USB_ENDPOINT_XFER_ISOC:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
++		break;
++	case USB_ENDPOINT_XFER_BULK:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
++		break;
++	case USB_ENDPOINT_XFER_INT:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
++		break;
++	}
++	ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
++
++	spin_lock_irqsave(&ep->udc->lock, flags);
++
++	if (ep->desc) {
++		spin_unlock_irqrestore(&ep->udc->lock, flags);
++		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
++		return -EBUSY;
++	}
++
++	ep->desc = desc;
++	ep->ep.maxpacket = maxpacket;
++
++	usba_ep_writel(ep, CFG, ept_cfg);
++	usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++
++	if (ep_can_dma(ep)) {
++		u32 ctrl;
++
++		usba_writel(udc, INT_ENB,
++			     (usba_readl(udc, INT_ENB)
++			      | USBA_BF(EPT_INT, 1 << ep->index)
++			      | USBA_BF(DMA_INT, 1 << ep->index)));
++		ctrl = USBA_BIT(AUTO_VALID) | USBA_BIT(INTDIS_DMA);
++		usba_ep_writel(ep, CTL_ENB, ctrl);
++	} else {
++		usba_writel(udc, INT_ENB,
++			     (usba_readl(udc, INT_ENB)
++			      | USBA_BF(EPT_INT, 1 << ep->index)));
++	}
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
++	    (unsigned long)usba_ep_readl(ep, CFG));
++	DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
++	    (unsigned long)usba_readl(udc, INT_ENB));
++
++	return 0;
++}
++
++static int usba_ep_disable(struct usb_ep *_ep)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	LIST_HEAD(req_list);
++	unsigned long flags;
++
++	DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	if (!ep->desc) {
++		spin_unlock_irqrestore(&udc->lock, flags);
++		DBG(DBG_ERR, "ep_disable: %s not enabled\n",
++		    ep_name(ep));
++		return -EINVAL;
++	}
++	ep->desc = NULL;
++
++	list_splice_init(&ep->queue, &req_list);
++	if (ep_can_dma(ep)) {
++		usba_dma_writel(ep, CONTROL, 0);
++		usba_dma_writel(ep, ADDRESS, 0);
++		usba_dma_readl(ep, STATUS);
++	}
++	usba_ep_writel(ep, CTL_DIS, USBA_BIT(EPT_ENABLE));
++	usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
++				    & ~USBA_BF(EPT_INT, 1 << ep->index)));
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	request_complete_list(ep, &req_list, -ESHUTDOWN);
++
++	return 0;
++}
++
++static struct usb_request *
++usba_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
++{
++	struct usba_request *req;
++
++	DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
++
++	req = kzalloc(sizeof(*req), gfp_flags);
++	if (!req)
++		return NULL;
++
++	INIT_LIST_HEAD(&req->queue);
++	req->req.dma = DMA_ADDR_INVALID;
++
++	return &req->req;
++}
++
++static void
++usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct usba_request *req = to_usba_req(_req);
++
++	DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++
++	kfree(req);
++}
++
++static void *usba_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
++				   dma_addr_t *dma, unsigned gfp_flags)
++{
++	void *buf;
++
++	if (bytes < L1_CACHE_BYTES)
++		bytes = L1_CACHE_BYTES;
++
++	buf = kmalloc(bytes, gfp_flags);
++
++	/*
++	 * Seems like we have to map the buffer any chance we get.
++	 * ether.c wants us to initialize the dma member of a
++	 * different request than the one receiving the buffer, so one
++	 * never knows...
++	 *
++	 * Ah, screw it.  The ether driver is probably wrong, and this
++	 * is not the right place to do the mapping.  The driver
++	 * shouldn't mess with our DMA mappings anyway.
++	 */
++	*dma = DMA_ADDR_INVALID;
++
++	return buf;
++}
++
++static void usba_ep_free_buffer(struct usb_ep *_ep, void *buf,
++				 dma_addr_t dma, unsigned bytes)
++{
++	DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
++	    _ep->name, buf, bytes);
++	kfree(buf);
++}
++
++static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
++		     struct usba_request *req, gfp_t gfp_flags)
++{
++	unsigned long flags;
++	int ret;
++
++	DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
++	    ep_name(ep), req->req.length, req->req.dma,
++	    req->req.zero ? 'Z' : 'z',
++	    req->req.short_not_ok ? 'S' : 's',
++	    req->req.no_interrupt ? 'I' : 'i');
++
++	if (req->req.length > 0x10000) {
++		/* Lengths from 0 to 65536 (inclusive) are supported */
++		DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
++		return -EINVAL;
++	}
++
++	req->using_dma = 1;
++
++	if (req->req.dma == DMA_ADDR_INVALID) {
++		req->req.dma = dma_map_single(
++			&udc->pdev->dev, req->req.buf, req->req.length,
++			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++		req->mapped = 1;
++	} else {
++		dma_sync_single_for_device(
++			&udc->pdev->dev, req->req.dma, req->req.length,
++			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++		req->mapped = 0;
++	}
++
++	req->ctrl = (USBA_BF(DMA_BUF_LEN, req->req.length)
++		     | USBA_BIT(DMA_CH_EN) | USBA_BIT(DMA_END_BUF_IE)
++		     | USBA_BIT(DMA_END_TR_EN) | USBA_BIT(DMA_END_TR_IE));
++
++	if (ep_is_in(ep))
++		req->ctrl |= USBA_BIT(DMA_END_BUF_EN);
++
++	/*
++	 * Add this request to the queue and submit for DMA if
++	 * possible. Check if we're still alive first -- we may have
++	 * received a reset since last time we checked.
++	 */
++	ret = -ESHUTDOWN;
++	spin_lock_irqsave(&udc->lock, flags);
++	if (ep->desc) {
++		if (list_empty(&ep->queue))
++			submit_request(ep, req);
++
++		list_add_tail(&req->queue, &ep->queue);
++		ret = 0;
++	}
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return ret;
++}
++
++static int usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
++			  gfp_t gfp_flags)
++{
++	struct usba_request *req = to_usba_req(_req);
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	unsigned long flags;
++	int ret;
++
++	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
++	    "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
++
++	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN
++	    || !ep->desc)
++		return -ESHUTDOWN;
++
++	req->submitted = 0;
++	req->using_dma = 0;
++	req->last_transaction = 0;
++
++	_req->status = -EINPROGRESS;
++	_req->actual = 0;
++
++	if (ep_can_dma(ep))
++		return queue_dma(udc, ep, req, gfp_flags);
++
++	/* May have received a reset since last time we checked */
++	ret = -ESHUTDOWN;
++	spin_lock_irqsave(&udc->lock, flags);
++	if (ep->desc) {
++		list_add_tail(&req->queue, &ep->queue);
++
++		if (ep_is_in(ep)
++		    || (ep_is_control(ep)
++			&& (ep->state == DATA_STAGE_IN
++			    || ep->state == STATUS_STAGE_IN)))
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
++		else
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
++		ret = 0;
++	}
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return ret;
++}
++
++static void usba_update_req(struct usba_ep *ep, struct usba_request *req,
++			     u32 status)
++{
++	req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
++}
++
++static int stop_dma(struct usba_ep *ep, u32 *pstatus)
++{
++	unsigned int timeout;
++	u32 status;
++
++	/*
++	 * Stop the DMA controller. When writing both CH_EN
++	 * and LINK to 0, the other bits are not affected.
++	 */
++	usba_dma_writel(ep, CONTROL, 0);
++
++	/* Wait for the FIFO to empty */
++	for (timeout = 40; timeout; --timeout) {
++		status = usba_dma_readl(ep, STATUS);
++		if (!(status & USBA_BIT(DMA_CH_EN)))
++			break;
++		udelay(1);
++	}
++
++	if (pstatus)
++		*pstatus = status;
++
++	if (timeout == 0) {
++		dev_err(&ep->udc->pdev->dev,
++			"%s: timed out waiting for DMA FIFO to empty\n",
++			ep_name(ep));
++		return -ETIMEDOUT;
++	}
++
++	return 0;
++}
++
++static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	struct usba_request *req = to_usba_req(_req);
++	unsigned long flags;
++	u32 status;
++
++	DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
++	    ep_name(ep), req);
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	if (req->using_dma) {
++		/*
++		 * If this request is currently being transferred,
++		 * stop the DMA controller and reset the FIFO.
++		 */
++		if (ep->queue.next == &req->queue) {
++			status = usba_dma_readl(ep, STATUS);
++			if (status & USBA_BIT(DMA_CH_EN))
++				stop_dma(ep, &status);
++
++#ifdef CONFIG_DEBUG_FS
++			ep->last_dma_status = status;
++#endif
++
++			usba_writel(udc, EPT_RST,
++				     1 << ep_index(ep));
++
++			usba_update_req(ep, req, status);
++		}
++	}
++
++	/*
++	 * Errors should stop the queue from advancing until the
++	 * completion function returns.
++	 */
++	list_del_init(&req->queue);
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	request_complete(ep, req, -ECONNRESET);
++
++	/* Process the next request if any */
++	spin_lock_irqsave(&udc->lock, flags);
++	submit_next_request(ep);
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return 0;
++}
++
++static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	unsigned long flags;
++	int ret = 0;
++
++	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
++	    value ? "set" : "clear");
++
++	if (!ep->desc) {
++		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
++		    ep_name(ep));
++		return -ENODEV;
++	}
++	if (ep_is_isochronous(ep)) {
++		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
++		    ep_name(ep));
++		return -ENOTTY;
++	}
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	/*
++	 * We can't halt IN endpoints while there are still data to be
++	 * transferred
++	 */
++	if (!list_empty(&ep->queue)
++	    || ((value && ep_is_in(ep)
++		 && (usba_ep_readl(ep, STA)
++		     & USBA_BF(BUSY_BANKS, -1L))))) {
++		ret = -EAGAIN;
++	} else {
++		if (value)
++			usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
++		else
++			usba_ep_writel(ep, CLR_STA, (USBA_BIT(FORCE_STALL)
++						     | USBA_BIT(TOGGLE_SEQ)));
++		usba_ep_readl(ep, STA);
++	}
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return ret;
++}
++
++static int usba_ep_fifo_status(struct usb_ep *_ep)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++
++	return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++}
++
++static void usba_ep_fifo_flush(struct usb_ep *_ep)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++
++	usba_writel(udc, EPT_RST, 1 << ep->index);
++}
++
++struct usb_ep_ops usba_ep_ops = {
++	.enable		= usba_ep_enable,
++	.disable	= usba_ep_disable,
++	.alloc_request	= usba_ep_alloc_request,
++	.free_request	= usba_ep_free_request,
++	.alloc_buffer	= usba_ep_alloc_buffer,
++	.free_buffer	= usba_ep_free_buffer,
++	.queue		= usba_ep_queue,
++	.dequeue	= usba_ep_dequeue,
++	.set_halt	= usba_ep_set_halt,
++	.fifo_status	= usba_ep_fifo_status,
++	.fifo_flush	= usba_ep_fifo_flush,
++};
++
++static int usba_udc_get_frame(struct usb_gadget *gadget)
++{
++	struct usba_udc *udc = to_usba_udc(gadget);
++
++	return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
++}
++
++struct usb_gadget_ops usba_udc_ops = {
++	.get_frame	= usba_udc_get_frame,
++};
++
++#define EP(nam, type, idx, dma, isoc)				\
++{								\
++	.ep	= {						\
++		.ops		= &usba_ep_ops,			\
++		.name		= nam,				\
++		.maxpacket	= type##_FIFO_SIZE,		\
++	},							\
++	.udc		= &the_udc,				\
++	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
++	.fifo_size	= type##_FIFO_SIZE,			\
++	.nr_banks	= type##_NR_BANKS,			\
++	.index		= idx,					\
++	.can_dma	= dma,					\
++	.can_isoc	= isoc,					\
++}
++
++static struct usba_ep usba_ep[] = {
++	EP("ep0", EP0, 0, 0, 0),
++	EP("ep1in-bulk", BULK, 1, 1, 0),
++	EP("ep2out-bulk", BULK, 2, 1, 0),
++	EP("ep3in-iso", ISO, 3, 1, 1),
++	EP("ep4out-iso", ISO, 4, 1, 1),
++	EP("ep5in-int", INT, 5, 1, 0),
++	EP("ep6out-int", INT, 6, 1, 0),
++};
++#undef EP
++
++static struct usb_endpoint_descriptor usba_ep0_desc = {
++	.bLength = USB_DT_ENDPOINT_SIZE,
++	.bDescriptorType = USB_DT_ENDPOINT,
++	.bEndpointAddress = 0,
++	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
++	.wMaxPacketSize = __constant_cpu_to_le16(64),
++	/* FIXME: I have no idea what to put here */
++	.bInterval = 1,
++};
++
++static void nop_release(struct device *dev)
++{
++
++}
++
++static struct usba_udc the_udc = {
++	.gadget	= {
++		.ops		= &usba_udc_ops,
++		.ep0		= &usba_ep[0].ep,
++		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
++		.is_dualspeed	= 1,
++		.name		= "atmel_usba_udc",
++		.dev	= {
++			.bus_id		= "gadget",
++			.release	= nop_release,
++		},
++	},
++
++	.lock	= SPIN_LOCK_UNLOCKED,
++};
++
++/*
++ * Called with interrupts disabled and udc->lock held.
++ */
++static void reset_all_endpoints(struct usba_udc *udc)
++{
++	struct usba_ep *ep;
++	struct usba_request *req, *tmp_req;
++
++	usba_writel(udc, EPT_RST, ~0UL);
++
++	ep = to_usba_ep(udc->gadget.ep0);
++	list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
++		list_del_init(&req->queue);
++		request_complete(ep, req, -ECONNRESET);
++	}
++
++	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
++		if (ep->desc)
++			usba_ep_disable(&ep->ep);
++	}
++}
++
++static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
++{
++	struct usba_ep *ep;
++
++	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++		return to_usba_ep(udc->gadget.ep0);
++
++	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
++		u8 bEndpointAddress;
++
++		if (!ep->desc)
++			continue;
++		bEndpointAddress = ep->desc->bEndpointAddress;
++		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
++			continue;
++		if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
++		    == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
++			return ep;
++	}
++
++	return NULL;
++}
++
++/* Called with interrupts disabled and udc->lock held */
++static inline void set_protocol_stall(struct usba_udc *udc,
++				      struct usba_ep *ep)
++{
++	usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
++	ep->state = WAIT_FOR_SETUP;
++}
++
++static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
++{
++	if (usba_ep_readl(ep, STA) & USBA_BIT(FORCE_STALL))
++		return 1;
++	return 0;
++}
++
++static inline void set_address(struct usba_udc *udc, unsigned int addr)
++{
++	u32 regval;
++
++	DBG(DBG_BUS, "setting address %u...\n", addr);
++	regval = usba_readl(udc, CTRL);
++	regval = USBA_BFINS(DEV_ADDR, addr, regval);
++	usba_writel(udc, CTRL, regval);
++}
++
++static int do_test_mode(struct usba_udc *udc)
++{
++	static const char test_packet_buffer[] = {
++		/* JKJKJKJK * 9 */
++		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++		/* JJKKJJKK * 8 */
++		0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
++		/* JJKKJJKK * 8 */
++		0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
++		/* JJJJJJJKKKKKKK * 8 */
++		0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++		/* JJJJJJJK * 8 */
++		0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
++		/* {JKKKKKKK * 10}, JK */
++		0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
++	};
++	struct device *dev = &udc->pdev->dev;
++	struct usba_ep *ep;
++	int test_mode;
++
++	test_mode = udc->test_mode;
++
++	/* Start from a clean slate */
++	reset_all_endpoints(udc);
++
++	switch (test_mode) {
++	case 0x0100:
++		/* Test_J */
++		usba_writel(udc, TST, USBA_BIT(TST_J_MODE));
++		dev_info(dev, "Entering Test_J mode...\n");
++		break;
++	case 0x0200:
++		/* Test_K */
++		usba_writel(udc, TST, USBA_BIT(TST_K_MODE));
++		dev_info(dev, "Entering Test_K mode...\n");
++		break;
++	case 0x0300:
++		/*
++		 * Test_SE0_NAK: Force high-speed mode and set up ep0
++		 * for Bulk IN transfers
++		 */
++		ep = &usba_ep[0];
++		usba_writel(udc, TST,
++			     USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
++		usba_ep_writel(ep, CFG,
++				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++				| USBA_BIT(EPT_DIR)
++				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++				| USBA_BF(BK_NUMBER, 1));
++		if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
++			set_protocol_stall(udc, ep);
++			dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
++		} else {
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++			dev_info(dev, "Entering Test_SE0_NAK mode...\n");
++		}
++		break;
++	case 0x0400:
++		/* Test_Packet */
++		ep = &usba_ep[0];
++		usba_ep_writel(ep, CFG,
++				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++				| USBA_BIT(EPT_DIR)
++				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++				| USBA_BF(BK_NUMBER, 1));
++		if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
++			set_protocol_stall(udc, ep);
++			dev_err(dev, "Test_Packet: ep0 not mapped\n");
++		} else {
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++			usba_writel(udc, TST, USBA_BIT(TST_PKT_MODE));
++			copy_to_fifo(ep->fifo, test_packet_buffer,
++				     sizeof(test_packet_buffer));
++			usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++			dev_info(dev, "Entering Test_Packet mode...\n");
++		}
++		break;
++	default:
++		dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* Avoid overly long expressions */
++static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
++{
++	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
++		return true;
++	return false;
++}
++
++static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
++{
++	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
++		return true;
++	return false;
++}
++
++static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
++{
++	if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
++		return true;
++	return false;
++}
++
++static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
++			    struct usb_ctrlrequest *crq)
++{
++	switch (crq->bRequest) {
++	case USB_REQ_GET_STATUS: {
++		u16 status;
++
++		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
++			/* Self-powered, no remote wakeup */
++			status = __constant_cpu_to_le16(1 << 0);
++		} else if (crq->bRequestType
++			   == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
++			status = __constant_cpu_to_le16(0);
++		} else if (crq->bRequestType
++			   == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
++			struct usba_ep *target;
++
++			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++			if (!target)
++				goto stall;
++
++			status = 0;
++			if (is_stalled(udc, target))
++				status |= __constant_cpu_to_le16(1);
++		} else {
++			goto delegate;
++		}
++
++		/* Write directly to the FIFO. No queueing is done. */
++		if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
++			goto stall;
++		ep->state = DATA_STAGE_IN;
++		__raw_writew(status, ep->fifo);
++		usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++		break;
++	}
++
++	case USB_REQ_CLEAR_FEATURE: {
++		if (crq->bRequestType == USB_RECIP_DEVICE) {
++			if (feature_is_dev_remote_wakeup(crq)) {
++				/* TODO: Handle REMOTE_WAKEUP */
++			} else {
++				/* Can't CLEAR_FEATURE TEST_MODE */
++				goto stall;
++			}
++		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++			struct usba_ep *target;
++
++			if (!feature_is_ep_halt(crq)
++			    || crq->wLength != __constant_cpu_to_le16(0))
++				goto stall;
++			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++			if (!target)
++				goto stall;
++
++			usba_ep_writel(target, CLR_STA,
++				       (USBA_BIT(FORCE_STALL)
++					| USBA_BIT(TOGGLE_SEQ)));
++		} else {
++			goto delegate;
++		}
++
++		send_status(udc, ep);
++		break;
++	}
++
++	case USB_REQ_SET_FEATURE: {
++		if (crq->bRequestType == USB_RECIP_DEVICE) {
++			if (feature_is_dev_test_mode(crq)) {
++				send_status(udc, ep);
++				ep->state = STATUS_STAGE_TEST;
++				udc->test_mode = le16_to_cpu(crq->wIndex);
++				return 0;
++			} else if (feature_is_dev_remote_wakeup(crq)) {
++				/* TODO: Handle REMOTE_WAKEUP */
++			} else {
++				goto stall;
++			}
++		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++			struct usba_ep *target;
++
++			if (!feature_is_ep_halt(crq)
++			    || crq->wLength != __constant_cpu_to_le16(0))
++				goto stall;
++
++			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++			if (!target)
++				goto stall;
++
++			usba_ep_writel(target, SET_STA, USBA_BIT(FORCE_STALL));
++		} else
++			goto delegate;
++
++		send_status(udc, ep);
++		break;
++	}
++
++	case USB_REQ_SET_ADDRESS:
++		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
++			goto delegate;
++
++		set_address(udc, le16_to_cpu(crq->wValue));
++		send_status(udc, ep);
++		ep->state = STATUS_STAGE_ADDR;
++		break;
++
++	default:
++delegate:
++		return udc->driver->setup(&udc->gadget, crq);
++	}
++
++	return 0;
++
++stall:
++	printk(KERN_ERR
++	       "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
++	       "halting endpoint...\n",
++	       ep_name(ep), crq->bRequestType, crq->bRequest,
++	       le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
++	       le16_to_cpu(crq->wLength));
++	set_protocol_stall(udc, ep);
++	return -1;
++}
++
++static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++	struct usba_request *req;
++	u32 epstatus;
++	u32 epctrl;
++
++restart:
++	epstatus = usba_ep_readl(ep, STA);
++	epctrl = usba_ep_readl(ep, CTL);
++
++	DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
++	    ep_name(ep), ep->state, epstatus, epctrl);
++
++	req = NULL;
++	if (!list_empty(&ep->queue))
++		req = list_entry(ep->queue.next,
++				 struct usba_request, queue);
++
++	if ((epctrl & USBA_BIT(TX_PK_RDY))
++	    && !(epstatus & USBA_BIT(TX_PK_RDY))) {
++		if (req->submitted)
++			next_fifo_transaction(ep, req);
++		else
++			submit_request(ep, req);
++
++		if (req->last_transaction) {
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++		}
++		goto restart;
++	}
++	if ((epstatus & epctrl) & USBA_BIT(TX_COMPLETE)) {
++		usba_ep_writel(ep, CLR_STA, USBA_BIT(TX_COMPLETE));
++
++		switch (ep->state) {
++		case DATA_STAGE_IN:
++			usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++			ep->state = STATUS_STAGE_OUT;
++			break;
++		case STATUS_STAGE_ADDR:
++			/* Activate our new address */
++			usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
++						| USBA_BIT(FADDR_EN)));
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++			ep->state = WAIT_FOR_SETUP;
++			break;
++		case STATUS_STAGE_IN:
++			if (req) {
++				list_del_init(&req->queue);
++				request_complete(ep, req, 0);
++				submit_next_request(ep);
++			}
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++			ep->state = WAIT_FOR_SETUP;
++			break;
++		case STATUS_STAGE_TEST:
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++			ep->state = WAIT_FOR_SETUP;
++			if (do_test_mode(udc))
++				set_protocol_stall(udc, ep);
++			break;
++		default:
++			printk(KERN_ERR
++			       "udc: %s: TXCOMP: Invalid endpoint state %d, "
++			       "halting endpoint...\n",
++			       ep_name(ep), ep->state);
++			set_protocol_stall(udc, ep);
++			break;
++		}
++
++		goto restart;
++	}
++	if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
++		switch (ep->state) {
++		case STATUS_STAGE_OUT:
++			usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++
++			if (req) {
++				list_del_init(&req->queue);
++				request_complete(ep, req, 0);
++			}
++			ep->state = WAIT_FOR_SETUP;
++			break;
++
++		case DATA_STAGE_OUT:
++			receive_data(ep);
++			break;
++
++		default:
++			usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++			printk(KERN_ERR
++			       "udc: %s: RXRDY: Invalid endpoint state %d, "
++			       "halting endpoint...\n",
++			       ep_name(ep), ep->state);
++			set_protocol_stall(udc, ep);
++			break;
++		}
++
++		goto restart;
++	}
++	if (epstatus & USBA_BIT(RX_SETUP)) {
++		union {
++			struct usb_ctrlrequest crq;
++			unsigned long data[2];
++		} crq;
++		unsigned int pkt_len;
++		int ret;
++
++		if (ep->state != WAIT_FOR_SETUP) {
++			/*
++			 * Didn't expect a SETUP packet at this
++			 * point. Clean up any pending requests (which
++			 * may be successful).
++			 */
++			int status = -EPROTO;
++
++			/*
++			 * RXRDY and TXCOMP are dropped when SETUP
++			 * packets arrive.  Just pretend we received
++			 * the status packet.
++			 */
++			if (ep->state == STATUS_STAGE_OUT
++			    || ep->state == STATUS_STAGE_IN) {
++				usba_ep_writel(ep, CTL_DIS,
++					       USBA_BIT(RX_BK_RDY));
++				status = 0;
++			}
++
++			if (req) {
++				list_del_init(&req->queue);
++				request_complete(ep, req, status);
++			}
++		}
++
++		pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
++		if (pkt_len != sizeof(crq)) {
++			printk(KERN_WARNING
++			       "udc: Invalid packet length %u (expected %lu)\n",
++			       pkt_len, sizeof(crq));
++			set_protocol_stall(udc, ep);
++			return;
++		}
++
++		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
++		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++
++		/* Free up one bank in the FIFO so that we can
++		 * generate or receive a reply right away. */
++		usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_SETUP));
++
++		/* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
++		       ep->state, crq.crq.bRequestType,
++		       crq.crq.bRequest); */
++
++		if (crq.crq.bRequestType & USB_DIR_IN) {
++			/*
++			 * The USB 2.0 spec states that "if wLength is
++			 * zero, there is no data transfer phase."
++			 * However, testusb #14 seems to actually
++			 * expect a data phase even if wLength = 0...
++			 */
++			ep->state = DATA_STAGE_IN;
++		} else {
++			if (crq.crq.wLength != __constant_cpu_to_le16(0))
++				ep->state = DATA_STAGE_OUT;
++			else
++				ep->state = STATUS_STAGE_IN;
++		}
++
++		ret = -1;
++		if (ep->index == 0)
++			ret = handle_ep0_setup(udc, ep, &crq.crq);
++		else
++			ret = udc->driver->setup(&udc->gadget, &crq.crq);
++
++		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
++		    crq.crq.bRequestType, crq.crq.bRequest,
++		    le16_to_cpu(crq.crq.wLength), ep->state, ret);
++
++		if (ret < 0) {
++			/* Let the host know that we failed */
++			set_protocol_stall(udc, ep);
++		}
++	}
++}
++
++static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++	struct usba_request *req;
++	u32 epstatus;
++	u32 epctrl;
++
++	epstatus = usba_ep_readl(ep, STA);
++	epctrl = usba_ep_readl(ep, CTL);
++
++	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
++	    ep_name(ep), epstatus);
++
++	while ((epctrl & USBA_BIT(TX_PK_RDY))
++	       && !(epstatus & USBA_BIT(TX_PK_RDY))) {
++		DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
++
++		if (list_empty(&ep->queue)) {
++			dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
++			usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
++			return;
++		}
++
++		req = list_entry(ep->queue.next, struct usba_request, queue);
++
++		if (req->using_dma) {
++			/* Send a zero-length packet */
++			usba_ep_writel(ep, SET_STA,
++					USBA_BIT(TX_PK_RDY));
++			usba_ep_writel(ep, CTL_DIS,
++					USBA_BIT(TX_PK_RDY));
++			list_del_init(&req->queue);
++			submit_next_request(ep);
++			request_complete(ep, req, 0);
++		} else {
++			if (req->submitted)
++				next_fifo_transaction(ep, req);
++			else
++				submit_request(ep, req);
++
++			if (req->last_transaction) {
++				list_del_init(&req->queue);
++				submit_next_request(ep);
++				request_complete(ep, req, 0);
++			}
++		}
++
++		epstatus = usba_ep_readl(ep, STA);
++		epctrl = usba_ep_readl(ep, CTL);
++	}
++	if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
++		DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
++		receive_data(ep);
++		usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++	}
++}
++
++static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++	struct usba_request *req;
++	u32 status, control, pending;
++
++	status = usba_dma_readl(ep, STATUS);
++	control = usba_dma_readl(ep, CONTROL);
++#ifdef CONFIG_DEBUG_FS
++	ep->last_dma_status = status;
++#endif
++	pending = status & control;
++	DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n",
++	    status, control);
++
++	if (status & USBA_BIT(DMA_CH_EN)) {
++		dev_err(&udc->pdev->dev,
++			"DMA_CH_EN is set after transfer is finished!\n");
++		dev_err(&udc->pdev->dev,
++		       "status=%#08x, pending=%#08x, control=%#08x\n",
++		       status, pending, control);
++
++		/*
++		 * try to pretend nothing happened. We might have to
++		 * do something here...
++		 */
++	}
++
++	if (list_empty(&ep->queue))
++		/* Might happen if a reset comes along at the right moment */
++		return;
++
++	if (pending & (USBA_BIT(DMA_END_TR_ST) | USBA_BIT(DMA_END_BUF_ST))) {
++		req = list_entry(ep->queue.next, struct usba_request, queue);
++		usba_update_req(ep, req, status);
++
++		list_del_init(&req->queue);
++		submit_next_request(ep);
++		request_complete(ep, req, 0);
++	}
++}
++
++static irqreturn_t usba_udc_irq(int irq, void *devid)
++{
++	struct usba_udc *udc = devid;
++	u32 status;
++	u32 dma_status;
++	u32 ep_status;
++
++	spin_lock(&udc->lock);
++
++	status = usba_readl(udc, INT_STA);
++	DBG(DBG_INT, "irq, status=%#08x\n", status);
++
++	if (status & USBA_BIT(DET_SUSPEND)) {
++		usba_writel(udc, INT_CLR, USBA_BIT(DET_SUSPEND));
++		DBG(DBG_BUS, "Suspend detected\n");
++		if (udc->gadget.speed != USB_SPEED_UNKNOWN
++		    && udc->driver && udc->driver->suspend)
++			udc->driver->suspend(&udc->gadget);
++	}
++
++	if (status & USBA_BIT(WAKE_UP)) {
++		usba_writel(udc, INT_CLR, USBA_BIT(WAKE_UP));
++		DBG(DBG_BUS, "Wake Up CPU detected\n");
++	}
++
++	if (status & USBA_BIT(END_OF_RESUME)) {
++		usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESUME));
++		DBG(DBG_BUS, "Resume detected\n");
++		if (udc->gadget.speed != USB_SPEED_UNKNOWN
++		    && udc->driver && udc->driver->resume)
++			udc->driver->resume(&udc->gadget);
++	}
++
++	dma_status = USBA_BFEXT(DMA_INT, status);
++	if (dma_status) {
++		int i;
++
++		for (i = 1; i < USBA_NR_ENDPOINTS; i++)
++			if (dma_status & (1 << i))
++				usba_dma_irq(udc, &usba_ep[i]);
++	}
++
++	ep_status = USBA_BFEXT(EPT_INT, status);
++	if (ep_status) {
++		int i;
++
++		for (i = 0; i < USBA_NR_ENDPOINTS; i++)
++			if (ep_status & (1 << i)) {
++				if (ep_is_control(&usba_ep[i]))
++					usba_control_irq(udc, &usba_ep[i]);
++				else
++					usba_ep_irq(udc, &usba_ep[i]);
++			}
++	}
++
++	if (status & USBA_BIT(END_OF_RESET)) {
++		struct usba_ep *ep0;
++
++		usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESET));
++		reset_all_endpoints(udc);
++
++		if (status & USBA_BIT(HIGH_SPEED)) {
++			DBG(DBG_BUS, "High-speed bus reset detected\n");
++			udc->gadget.speed = USB_SPEED_HIGH;
++		} else {
++			DBG(DBG_BUS, "Full-speed bus reset detected\n");
++			udc->gadget.speed = USB_SPEED_FULL;
++		}
++
++		ep0 = &usba_ep[0];
++		ep0->desc = &usba_ep0_desc;
++		ep0->state = WAIT_FOR_SETUP;
++		usba_ep_writel(ep0, CFG,
++			       (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
++				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
++				| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
++		usba_ep_writel(ep0, CTL_ENB,
++			       USBA_BIT(EPT_ENABLE) | USBA_BIT(RX_SETUP));
++		usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
++					   | USBA_BF(EPT_INT, 1)
++					   | USBA_BIT(DET_SUSPEND)
++					   | USBA_BIT(END_OF_RESUME)));
++
++		if (!(usba_ep_readl(ep0, CFG) & USBA_BIT(EPT_MAPPED)))
++			dev_warn(&udc->pdev->dev,
++				 "WARNING: EP0 configuration is invalid!\n");
++	}
++
++	spin_unlock(&udc->lock);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t usba_vbus_irq(int irq, void *devid)
++{
++	struct usba_udc *udc = devid;
++	int vbus;
++
++	/* debounce */
++	udelay(10);
++
++	spin_lock(&udc->lock);
++	vbus = gpio_get_value(udc->vbus_pin);
++	if (vbus != udc->vbus_prev) {
++		if (vbus) {
++			usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
++			usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
++		} else {
++			udc->gadget.speed = USB_SPEED_UNKNOWN;
++			reset_all_endpoints(udc);
++			usba_writel(udc, CTRL, 0);
++			if (udc->driver)
++				udc->driver->disconnect(&udc->gadget);
++		}
++		udc->vbus_prev = vbus;
++	}
++	spin_unlock(&udc->lock);
++
++	return IRQ_HANDLED;
++}
++
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++	struct usba_udc *udc = &the_udc;
++	unsigned long flags;
++	int ret;
++
++	if (!udc->pdev)
++		return -ENODEV;
++
++	spin_lock_irqsave(&udc->lock, flags);
++	if (udc->driver) {
++		spin_unlock_irqrestore(&udc->lock, flags);
++		return -EBUSY;
++	}
++
++	udc->driver = driver;
++	udc->gadget.dev.driver = &driver->driver;
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	clk_enable(udc->pclk);
++	clk_enable(udc->hclk);
++
++	ret = driver->bind(&udc->gadget);
++	if (ret) {
++		DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
++		    driver->driver.name, ret);
++		goto err_driver_bind;
++	}
++
++	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
++
++	udc->vbus_prev = 0;
++	if (udc->vbus_pin != -1) {
++		ret = request_irq(gpio_to_irq(udc->vbus_pin),
++				  usba_vbus_irq, 0, "atmel_usba_udc", udc);
++		if (ret) {
++			gpio_free(udc->vbus_pin);
++			udc->vbus_pin = -1;
++			dev_warn(&udc->pdev->dev,
++				 "failed to request vbus irq; "
++				 "assuming always on\n");
++		}
++	}
++
++	/* If Vbus is present, enable the controller and wait for reset */
++	spin_lock_irqsave(&udc->lock, flags);
++	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
++		usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
++		usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
++	}
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return 0;
++
++err_driver_bind:
++	udc->driver = NULL;
++	udc->gadget.dev.driver = NULL;
++	return ret;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	struct usba_udc *udc = &the_udc;
++	unsigned long flags;
++
++	if (!udc->pdev)
++		return -ENODEV;
++	if (driver != udc->driver)
++		return -EINVAL;
++
++	if (udc->vbus_pin != -1)
++		free_irq(gpio_to_irq(udc->vbus_pin), udc);
++
++	spin_lock_irqsave(&udc->lock, flags);
++	udc->gadget.speed = USB_SPEED_UNKNOWN;
++	reset_all_endpoints(udc);
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	/* This will also disable the DP pullup */
++	usba_writel(udc, CTRL, 0);
++
++	driver->unbind(&udc->gadget);
++	udc->gadget.dev.driver = NULL;
++	udc->driver = NULL;
++
++	clk_disable(udc->hclk);
++	clk_disable(udc->pclk);
++
++	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
++
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++static int __devinit usba_udc_probe(struct platform_device *pdev)
++{
++	struct usba_platform_data *pdata = pdev->dev.platform_data;
++	struct resource *regs, *fifo;
++	struct clk *pclk, *hclk;
++	struct usba_udc *udc = &the_udc;
++	int irq, ret, i;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
++	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
++	if (!regs || !fifo)
++		return -ENXIO;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(pclk))
++		return PTR_ERR(pclk);
++	hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(hclk)) {
++		ret = PTR_ERR(hclk);
++		goto err_get_hclk;
++	}
++
++	udc->pdev = pdev;
++	udc->pclk = pclk;
++	udc->hclk = hclk;
++	udc->vbus_pin = -1;
++
++	ret = -ENOMEM;
++	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!udc->regs) {
++		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
++		goto err_map_regs;
++	}
++	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
++		 (unsigned long)regs->start, udc->regs);
++	udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
++	if (!udc->fifo) {
++		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
++		goto err_map_fifo;
++	}
++	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
++		 (unsigned long)fifo->start, udc->fifo);
++
++	device_initialize(&udc->gadget.dev);
++	udc->gadget.dev.parent = &pdev->dev;
++	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++	platform_set_drvdata(pdev, udc);
++
++	/* Make sure we start from a clean slate */
++	clk_enable(pclk);
++	usba_writel(udc, CTRL, 0);
++	clk_disable(pclk);
++
++	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
++	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
++	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
++	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
++	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
++		struct usba_ep *ep = &usba_ep[i];
++
++		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
++		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
++		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++
++		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++	}
++
++	ret = request_irq(irq, usba_udc_irq, IRQF_SAMPLE_RANDOM,
++			  "atmel_usba_udc", udc);
++	if (ret) {
++		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
++			irq, ret);
++		goto err_request_irq;
++	}
++	udc->irq = irq;
++
++	ret = device_add(&udc->gadget.dev);
++	if (ret) {
++		dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
++		goto err_device_add;
++	}
++
++	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE)
++		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc"))
++			udc->vbus_pin = pdata->vbus_pin;
++
++	usba_init_debugfs(udc);
++	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++		usba_ep_init_debugfs(udc, &usba_ep[i]);
++
++	return 0;
++
++err_device_add:
++	free_irq(irq, udc);
++err_request_irq:
++	iounmap(udc->fifo);
++err_map_fifo:
++	iounmap(udc->regs);
++err_map_regs:
++	clk_put(hclk);
++err_get_hclk:
++	clk_put(pclk);
++
++	platform_set_drvdata(pdev, NULL);
++
++	return ret;
++}
++
++static int __devexit usba_udc_remove(struct platform_device *pdev)
++{
++	struct usba_udc *udc;
++	int i;
++
++	udc = platform_get_drvdata(pdev);
++
++	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++		usba_ep_cleanup_debugfs(&usba_ep[i]);
++	usba_cleanup_debugfs(udc);
++
++	if (udc->vbus_pin != -1)
++		gpio_free(udc->vbus_pin);
++
++	free_irq(udc->irq, udc);
++	iounmap(udc->fifo);
++	iounmap(udc->regs);
++	clk_put(udc->hclk);
++	clk_put(udc->pclk);
++
++	device_unregister(&udc->gadget.dev);
++
++	return 0;
++}
++
++static struct platform_driver udc_driver = {
++	.probe		= usba_udc_probe,
++	.remove		= __devexit_p(usba_udc_remove),
++	.driver		= {
++		.name		= "atmel_usba_udc",
++	},
++};
++
++static int __init udc_init(void)
++{
++	return platform_driver_register(&udc_driver);
++}
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++	platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("Atmel USBA UDC driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
+new file mode 100644
+index 0000000..408d2ce
+--- /dev/null
++++ b/drivers/usb/gadget/atmel_usba_udc.h
+@@ -0,0 +1,402 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
++#define __LINUX_USB_GADGET_USBA_UDC_H__
++
++/* USB register offsets */
++#define USBA_CTRL				0x0000
++#define USBA_FNUM				0x0004
++#define USBA_INT_ENB				0x0010
++#define USBA_INT_STA				0x0014
++#define USBA_INT_CLR				0x0018
++#define USBA_EPT_RST				0x001c
++#define USBA_TST_SOF_CNT			0x00d0
++#define USBA_TST_CNT_A				0x00d4
++#define USBA_TST_CNT_B				0x00d8
++#define USBA_TST_MODE_REG			0x00dc
++#define USBA_TST				0x00e0
++
++/* USB endpoint register offsets */
++#define USBA_EPT_CFG				0x0000
++#define USBA_EPT_CTL_ENB			0x0004
++#define USBA_EPT_CTL_DIS			0x0008
++#define USBA_EPT_CTL				0x000c
++#define USBA_EPT_SET_STA			0x0014
++#define USBA_EPT_CLR_STA			0x0018
++#define USBA_EPT_STA				0x001c
++
++/* USB DMA register offsets */
++#define USBA_DMA_NXT_DSC			0x0000
++#define USBA_DMA_ADDRESS			0x0004
++#define USBA_DMA_CONTROL			0x0008
++#define USBA_DMA_STATUS				0x000c
++
++/* Bitfields in CTRL */
++#define USBA_DEV_ADDR_OFFSET			0
++#define USBA_DEV_ADDR_SIZE			7
++#define USBA_FADDR_EN_OFFSET			7
++#define USBA_FADDR_EN_SIZE			1
++#define USBA_EN_USBA_OFFSET			8
++#define USBA_EN_USBA_SIZE			1
++#define USBA_DETACH_OFFSET			9
++#define USBA_DETACH_SIZE			1
++#define USBA_REMOTE_WAKE_UP_OFFSET		10
++#define USBA_REMOTE_WAKE_UP_SIZE		1
++
++/* Bitfields in FNUM */
++#define USBA_MICRO_FRAME_NUM_OFFSET		0
++#define USBA_MICRO_FRAME_NUM_SIZE		3
++#define USBA_FRAME_NUMBER_OFFSET		3
++#define USBA_FRAME_NUMBER_SIZE			11
++#define USBA_FRAME_NUM_ERROR_OFFSET		31
++#define USBA_FRAME_NUM_ERROR_SIZE		1
++
++/* Bitfields in INT_ENB/INT_STA/INT_CLR */
++#define USBA_HIGH_SPEED_OFFSET			0
++#define USBA_HIGH_SPEED_SIZE			1
++#define USBA_DET_SUSPEND_OFFSET			1
++#define USBA_DET_SUSPEND_SIZE			1
++#define USBA_MICRO_SOF_OFFSET			2
++#define USBA_MICRO_SOF_SIZE			1
++#define USBA_SOF_OFFSET				3
++#define USBA_SOF_SIZE				1
++#define USBA_END_OF_RESET_OFFSET		4
++#define USBA_END_OF_RESET_SIZE			1
++#define USBA_WAKE_UP_OFFSET			5
++#define USBA_WAKE_UP_SIZE			1
++#define USBA_END_OF_RESUME_OFFSET		6
++#define USBA_END_OF_RESUME_SIZE			1
++#define USBA_UPSTREAM_RESUME_OFFSET		7
++#define USBA_UPSTREAM_RESUME_SIZE		1
++#define USBA_EPT_INT_OFFSET			8
++#define USBA_EPT_INT_SIZE			16
++#define USBA_DMA_INT_OFFSET			24
++#define USBA_DMA_INT_SIZE			8
++
++/* Bitfields in EPT_RST */
++#define USBA_RST_OFFSET				0
++#define USBA_RST_SIZE				16
++
++/* Bitfields in TST_SOF_CNT */
++#define USBA_SOF_CNT_MAX_OFFSET			0
++#define USBA_SOF_CNT_MAX_SIZE			7
++#define USBA_SOF_CNT_LOAD_OFFSET		7
++#define USBA_SOF_CNT_LOAD_SIZE			1
++
++/* Bitfields in TST_CNT_A */
++#define USBA_CNT_A_MAX_OFFSET			0
++#define USBA_CNT_A_MAX_SIZE			7
++#define USBA_CNT_A_LOAD_OFFSET			7
++#define USBA_CNT_A_LOAD_SIZE			1
++
++/* Bitfields in TST_CNT_B */
++#define USBA_CNT_B_MAX_OFFSET			0
++#define USBA_CNT_B_MAX_SIZE			7
++#define USBA_CNT_B_LOAD_OFFSET			7
++#define USBA_CNT_B_LOAD_SIZE			1
++
++/* Bitfields in TST_MODE_REG */
++#define USBA_TST_MODE_OFFSET			0
++#define USBA_TST_MODE_SIZE			6
++
++/* Bitfields in USBA_TST */
++#define USBA_SPEED_CFG_OFFSET			0
++#define USBA_SPEED_CFG_SIZE			2
++#define USBA_TST_J_MODE_OFFSET			2
++#define USBA_TST_J_MODE_SIZE			1
++#define USBA_TST_K_MODE_OFFSET			3
++#define USBA_TST_K_MODE_SIZE			1
++#define USBA_TST_PKT_MODE_OFFSET		4
++#define USBA_TST_PKT_MODE_SIZE			1
++#define USBA_OPMODE2_OFFSET			5
++#define USBA_OPMODE2_SIZE			1
++
++/* Bitfields in EPT_CFG */
++#define USBA_EPT_SIZE_OFFSET			0
++#define USBA_EPT_SIZE_SIZE			3
++#define USBA_EPT_DIR_OFFSET			3
++#define USBA_EPT_DIR_SIZE			1
++#define USBA_EPT_TYPE_OFFSET			4
++#define USBA_EPT_TYPE_SIZE			2
++#define USBA_BK_NUMBER_OFFSET			6
++#define USBA_BK_NUMBER_SIZE			2
++#define USBA_NB_TRANS_OFFSET			8
++#define USBA_NB_TRANS_SIZE			2
++#define USBA_EPT_MAPPED_OFFSET			31
++#define USBA_EPT_MAPPED_SIZE			1
++
++/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
++#define USBA_EPT_ENABLE_OFFSET			0
++#define USBA_EPT_ENABLE_SIZE			1
++#define USBA_AUTO_VALID_OFFSET			1
++#define USBA_AUTO_VALID_SIZE			1
++#define USBA_INTDIS_DMA_OFFSET			3
++#define USBA_INTDIS_DMA_SIZE			1
++#define USBA_NYET_DIS_OFFSET			4
++#define USBA_NYET_DIS_SIZE			1
++#define USBA_DATAX_RX_OFFSET			6
++#define USBA_DATAX_RX_SIZE			1
++#define USBA_MDATA_RX_OFFSET			7
++#define USBA_MDATA_RX_SIZE			1
++/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
++#define USBA_BUSY_BANK_IE_OFFSET		18
++#define USBA_BUSY_BANK_IE_SIZE			1
++
++/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
++#define USBA_FORCE_STALL_OFFSET			5
++#define USBA_FORCE_STALL_SIZE			1
++#define USBA_TOGGLE_SEQ_OFFSET			6
++#define USBA_TOGGLE_SEQ_SIZE			2
++#define USBA_ERR_OVFLW_OFFSET			8
++#define USBA_ERR_OVFLW_SIZE			1
++#define USBA_RX_BK_RDY_OFFSET			9
++#define USBA_RX_BK_RDY_SIZE			1
++#define USBA_KILL_BANK_OFFSET			9
++#define USBA_KILL_BANK_SIZE			1
++#define USBA_TX_COMPLETE_OFFSET			10
++#define USBA_TX_COMPLETE_SIZE			1
++#define USBA_TX_PK_RDY_OFFSET			11
++#define USBA_TX_PK_RDY_SIZE			1
++#define USBA_ISO_ERR_TRANS_OFFSET		11
++#define USBA_ISO_ERR_TRANS_SIZE			1
++#define USBA_RX_SETUP_OFFSET			12
++#define USBA_RX_SETUP_SIZE			1
++#define USBA_ISO_ERR_FLOW_OFFSET		12
++#define USBA_ISO_ERR_FLOW_SIZE			1
++#define USBA_STALL_SENT_OFFSET			13
++#define USBA_STALL_SENT_SIZE			1
++#define USBA_ISO_ERR_CRC_OFFSET			13
++#define USBA_ISO_ERR_CRC_SIZE			1
++#define USBA_ISO_ERR_NBTRANS_OFFSET		13
++#define USBA_ISO_ERR_NBTRANS_SIZE		1
++#define USBA_NAK_IN_OFFSET			14
++#define USBA_NAK_IN_SIZE			1
++#define USBA_ISO_ERR_FLUSH_OFFSET		14
++#define USBA_ISO_ERR_FLUSH_SIZE			1
++#define USBA_NAK_OUT_OFFSET			15
++#define USBA_NAK_OUT_SIZE			1
++#define USBA_CURRENT_BANK_OFFSET		16
++#define USBA_CURRENT_BANK_SIZE			2
++#define USBA_BUSY_BANKS_OFFSET			18
++#define USBA_BUSY_BANKS_SIZE			2
++#define USBA_BYTE_COUNT_OFFSET			20
++#define USBA_BYTE_COUNT_SIZE			11
++#define USBA_SHORT_PACKET_OFFSET		31
++#define USBA_SHORT_PACKET_SIZE			1
++
++/* Bitfields in DMA_CONTROL */
++#define USBA_DMA_CH_EN_OFFSET			0
++#define USBA_DMA_CH_EN_SIZE			1
++#define USBA_DMA_LINK_OFFSET			1
++#define USBA_DMA_LINK_SIZE			1
++#define USBA_DMA_END_TR_EN_OFFSET		2
++#define USBA_DMA_END_TR_EN_SIZE			1
++#define USBA_DMA_END_BUF_EN_OFFSET		3
++#define USBA_DMA_END_BUF_EN_SIZE		1
++#define USBA_DMA_END_TR_IE_OFFSET		4
++#define USBA_DMA_END_TR_IE_SIZE			1
++#define USBA_DMA_END_BUF_IE_OFFSET		5
++#define USBA_DMA_END_BUF_IE_SIZE		1
++#define USBA_DMA_DESC_LOAD_IE_OFFSET		6
++#define USBA_DMA_DESC_LOAD_IE_SIZE		1
++#define USBA_DMA_BURST_LOCK_OFFSET		7
++#define USBA_DMA_BURST_LOCK_SIZE		1
++#define USBA_DMA_BUF_LEN_OFFSET			16
++#define USBA_DMA_BUF_LEN_SIZE			16
++
++/* Bitfields in DMA_STATUS */
++#define USBA_DMA_CH_ACTIVE_OFFSET		1
++#define USBA_DMA_CH_ACTIVE_SIZE			1
++#define USBA_DMA_END_TR_ST_OFFSET		4
++#define USBA_DMA_END_TR_ST_SIZE			1
++#define USBA_DMA_END_BUF_ST_OFFSET		5
++#define USBA_DMA_END_BUF_ST_SIZE		1
++#define USBA_DMA_DESC_LOAD_ST_OFFSET		6
++#define USBA_DMA_DESC_LOAD_ST_SIZE		1
++
++/* Constants for SPEED_CFG */
++#define USBA_SPEED_CFG_NORMAL			0
++#define USBA_SPEED_CFG_FORCE_HIGH		2
++#define USBA_SPEED_CFG_FORCE_FULL		3
++
++/* Constants for EPT_SIZE */
++#define USBA_EPT_SIZE_8				0
++#define USBA_EPT_SIZE_16			1
++#define USBA_EPT_SIZE_32			2
++#define USBA_EPT_SIZE_64			3
++#define USBA_EPT_SIZE_128			4
++#define USBA_EPT_SIZE_256			5
++#define USBA_EPT_SIZE_512			6
++#define USBA_EPT_SIZE_1024			7
++
++/* Constants for EPT_TYPE */
++#define USBA_EPT_TYPE_CONTROL			0
++#define USBA_EPT_TYPE_ISO			1
++#define USBA_EPT_TYPE_BULK			2
++#define USBA_EPT_TYPE_INT			3
++
++/* Constants for BK_NUMBER */
++#define USBA_BK_NUMBER_ZERO			0
++#define USBA_BK_NUMBER_ONE			1
++#define USBA_BK_NUMBER_DOUBLE			2
++#define USBA_BK_NUMBER_TRIPLE			3
++
++/* Bit manipulation macros */
++#define USBA_BIT(name)						\
++	(1 << USBA_##name##_OFFSET)
++#define USBA_BF(name, value)					\
++	(((value) & ((1 << USBA_##name##_SIZE) - 1))		\
++	 << USBA_##name##_OFFSET)
++#define USBA_BFEXT(name, value)					\
++	(((value) >> USBA_##name##_OFFSET)			\
++	 & ((1 << USBA_##name##_SIZE) - 1))
++#define USBA_BFINS(name, value, old)				\
++	(((old) & ~(((1 << USBA_##name##_SIZE) - 1)		\
++		    << USBA_##name##_OFFSET))			\
++	 | USBA_BF(name, value))
++
++/* Register access macros */
++#define usba_readl(udc, reg)					\
++	__raw_readl((udc)->regs + USBA_##reg)
++#define usba_writel(udc, reg, value)				\
++	__raw_writel((value), (udc)->regs + USBA_##reg)
++#define usba_ep_readl(ep, reg)					\
++	__raw_readl((ep)->ep_regs + USBA_EPT_##reg)
++#define usba_ep_writel(ep, reg, value)				\
++	__raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
++#define usba_dma_readl(ep, reg)					\
++	__raw_readl((ep)->dma_regs + USBA_DMA_##reg)
++#define usba_dma_writel(ep, reg, value)				\
++	__raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
++
++/* Calculate base address for a given endpoint or DMA controller */
++#define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
++#define USBA_DMA_BASE(x)	(0x300 + (x) * 0x10)
++#define USBA_FIFO_BASE(x)	((x) << 16)
++
++/* Synth parameters */
++#define USBA_NR_ENDPOINTS	7
++
++#define EP0_FIFO_SIZE		64
++#define EP0_EPT_SIZE		USBA_EPT_SIZE_64
++#define EP0_NR_BANKS		1
++#define BULK_FIFO_SIZE		512
++#define BULK_EPT_SIZE		USBA_EPT_SIZE_512
++#define BULK_NR_BANKS		2
++#define ISO_FIFO_SIZE		1024
++#define ISO_EPT_SIZE		USBA_EPT_SIZE_1024
++#define ISO_NR_BANKS		3
++#define INT_FIFO_SIZE		64
++#define INT_EPT_SIZE		USBA_EPT_SIZE_64
++#define INT_NR_BANKS		3
++
++enum usba_ctrl_state {
++	WAIT_FOR_SETUP,
++	DATA_STAGE_IN,
++	DATA_STAGE_OUT,
++	STATUS_STAGE_IN,
++	STATUS_STAGE_OUT,
++	STATUS_STAGE_ADDR,
++	STATUS_STAGE_TEST,
++};
++/*
++  EP_STATE_IDLE,
++  EP_STATE_SETUP,
++  EP_STATE_IN_DATA,
++  EP_STATE_OUT_DATA,
++  EP_STATE_SET_ADDR_STATUS,
++  EP_STATE_RX_STATUS,
++  EP_STATE_TX_STATUS,
++  EP_STATE_HALT,
++*/
++
++struct usba_dma_desc {
++	dma_addr_t next;
++	dma_addr_t addr;
++	u32 ctrl;
++};
++
++struct usba_ep {
++	int					state;
++	void __iomem				*ep_regs;
++	void __iomem				*dma_regs;
++	void __iomem				*fifo;
++	struct usb_ep				ep;
++	struct usba_udc				*udc;
++
++	struct list_head			queue;
++	const struct usb_endpoint_descriptor	*desc;
++
++	u16					fifo_size;
++	u8					nr_banks;
++	u8					index;
++	unsigned int				can_dma:1;
++	unsigned int				can_isoc:1;
++	unsigned int				is_isoc:1;
++	unsigned int				is_in:1;
++
++#ifdef CONFIG_DEBUG_FS
++	u32					last_dma_status;
++	struct dentry				*debugfs_dir;
++	struct dentry				*debugfs_queue;
++	struct dentry				*debugfs_dma_status;
++	struct dentry				*debugfs_state;
++#endif
++};
++
++struct usba_request {
++	struct usb_request			req;
++	struct list_head			queue;
++
++	u32					ctrl;
++
++	unsigned int				submitted:1;
++	unsigned int				last_transaction:1;
++	unsigned int				using_dma:1;
++	unsigned int				mapped:1;
++};
++
++struct usba_udc {
++	/* Protect hw registers from concurrent modifications */
++	spinlock_t lock;
++
++	void __iomem *regs;
++	void __iomem *fifo;
++
++	struct usb_gadget gadget;
++	struct usb_gadget_driver *driver;
++	struct platform_device *pdev;
++	int irq;
++	int vbus_pin;
++	struct clk *pclk;
++	struct clk *hclk;
++
++	int test_mode;
++	int vbus_prev;
++
++#ifdef CONFIG_DEBUG_FS
++	struct dentry *debugfs_root;
++	struct dentry *debugfs_regs;
++#endif
++};
++
++#define to_usba_ep(x) container_of((x), struct usba_ep, ep)
++#define to_usba_req(x) container_of((x), struct usba_request, req)
++#define to_usba_udc(x) container_of((x), struct usba_udc, gadget)
++
++#define ep_index(ep)		((ep)->index)
++#define ep_can_dma(ep)		((ep)->can_dma)
++#define ep_is_in(ep)		((ep)->is_in)
++#define ep_is_isochronous(ep)	((ep)->is_isoc)
++#define ep_is_control(ep)	(ep_index(ep) == 0)
++#define ep_name(ep)		((ep)->ep.name)
++#define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
++
++#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
+diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
+index 325bf7c..23e874b 100644
+--- a/drivers/usb/gadget/ether.c
++++ b/drivers/usb/gadget/ether.c
+@@ -277,7 +277,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
+ #define DEV_CONFIG_CDC
+ #endif
+ 
+-#ifdef CONFIG_USB_GADGET_HUSB2DEV
++#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+ #define DEV_CONFIG_CDC
+ #endif
+ 
+diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
+index d041b91..96e4dbc 100644
+--- a/drivers/usb/gadget/gadget_chips.h
++++ b/drivers/usb/gadget/gadget_chips.h
+@@ -75,10 +75,10 @@
+ #define	gadget_is_pxa27x(g)	0
+ #endif
+ 
+-#ifdef CONFIG_USB_GADGET_HUSB2DEV
+-#define gadget_is_husb2dev(g)	!strcmp("husb2_udc", (g)->name)
++#ifdef CONFIG_USB_GADGET_ATMEL_USBA
++#define gadget_is_atmel_usba(g)	!strcmp("atmel_usba_udc", (g)->name)
+ #else
+-#define gadget_is_husb2dev(g)	0
++#define gadget_is_atmel_usba(g)	0
+ #endif
+ 
+ #ifdef CONFIG_USB_GADGET_S3C2410
+@@ -181,7 +181,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+ 		return 0x16;
+ 	else if (gadget_is_mpc8272(gadget))
+ 		return 0x17;
+-	else if (gadget_is_husb2dev(gadget))
++	else if (gadget_is_atmel_usba(gadget))
+ 		return 0x18;
+ 	else if (gadget_is_fsl_usb2(gadget))
+ 		return 0x19;
+diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
+index 46d0e52..855f8cc 100644
+--- a/drivers/usb/gadget/inode.c
++++ b/drivers/usb/gadget/inode.c
+@@ -37,7 +37,7 @@
+ #include <linux/device.h>
+ #include <linux/moduleparam.h>
+ 
+-#include <linux/usb_gadgetfs.h>
++#include <linux/usb/gadgetfs.h>
+ #include <linux/usb_gadget.h>
+ 
+ 
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index 403dac7..f3e2897 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -849,6 +849,16 @@ config FB_INTSRAM
+ 	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ 	  to let frame buffer in external SDRAM.
+ 
++config FB_ATMEL_STN
++	bool "Use a STN display with AT91/AT32 LCD Controller"
++	depends on FB_ATMEL && ARCH_AT91SAM9261
++	default n
++	help
++	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
++	  Controller. Say N if you want to connect a TFT.
++
++	  If unsure, say N.
++
+ config FB_NVIDIA
+ 	tristate "nVidia Framebuffer Support"
+ 	depends on FB && PCI
+diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
+index e1d5bd0..bb361ab 100644
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
+@@ -37,7 +37,9 @@
+ #endif
+ 
+ #if defined(CONFIG_ARCH_AT91)
+-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
++#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
++					 | FBINFO_PARTIAL_PAN_OK \
++					 | FBINFO_HWACCEL_YPAN)
+ 
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ 					struct fb_var_screeninfo *var)
+@@ -74,11 +76,34 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ 	.type		= FB_TYPE_PACKED_PIXELS,
+ 	.visual		= FB_VISUAL_TRUECOLOR,
+ 	.xpanstep	= 0,
+-	.ypanstep	= 0,
++	.ypanstep	= 1,
+ 	.ywrapstep	= 0,
+ 	.accel		= FB_ACCEL_NONE,
+ };
+ 
++static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
++{
++	unsigned long value;
++
++	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
++		return xres;
++
++	value = xres;
++	if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
++		/* STN display */
++		if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
++			value *= 3;
++		}
++		if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
++		   || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
++		      && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
++			value = DIV_ROUND_UP(value, 4);
++		else
++			value = DIV_ROUND_UP(value, 8);
++	}
++
++	return value;
++}
+ 
+ static void atmel_lcdfb_update_dma(struct fb_info *info,
+ 			       struct fb_var_screeninfo *var)
+@@ -181,6 +206,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+ 	var->xoffset = var->yoffset = 0;
+ 
+ 	switch (var->bits_per_pixel) {
++	case 1:
+ 	case 2:
+ 	case 4:
+ 	case 8:
+@@ -195,8 +221,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+ 		var->blue.offset = 10;
+ 		var->red.length = var->green.length = var->blue.length = 5;
+ 		break;
+-	case 24:
+ 	case 32:
++		var->transp.offset = 24;
++		var->transp.length = 8;
++		/* fall through */
++	case 24:
+ 		var->red.offset = 0;
+ 		var->green.offset = 8;
+ 		var->blue.offset = 16;
+@@ -228,8 +257,10 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+ static int atmel_lcdfb_set_par(struct fb_info *info)
+ {
+ 	struct atmel_lcdfb_info *sinfo = info->par;
++	unsigned long hozval_linesz;
+ 	unsigned long value;
+ 	unsigned long clk_value_khz;
++	unsigned long bits_per_line;
+ 
+ 	dev_dbg(info->device, "%s:\n", __func__);
+ 	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
+@@ -241,12 +272,15 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ 
+ 	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ 
+-	if (info->var.bits_per_pixel <= 8)
++	if (info->var.bits_per_pixel == 1)
++		info->fix.visual = FB_VISUAL_MONO01;
++	else if (info->var.bits_per_pixel <= 8)
+ 		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ 	else
+ 		info->fix.visual = FB_VISUAL_TRUECOLOR;
+ 
+-	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++	bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
++	info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
+ 
+ 	/* Re-initialize the DMA engine... */
+ 	dev_dbg(info->device, "  * update DMA engine\n");
+@@ -262,18 +296,21 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ 	/* Set pixel clock */
+ 	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+ 
+-	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
+-
+-	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+-		value++;
++	value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
+ 
+ 	value = (value / 2) - 1;
++	dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n", value);
+ 
+ 	if (value <= 0) {
+ 		dev_notice(info->device, "Bypassing pixel clock divider\n");
+ 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+-	} else
++	} else {
+ 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
++		info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
++		dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
++					PICOS2KHZ(info->var.pixclock));
++	}
++
+ 
+ 	/* Initialize control register 2 */
+ 	value = sinfo->default_lcdcon2;
+@@ -311,9 +348,14 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ 	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
+ 	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+ 
++	/* Horizontal value (aka line size) */
++	hozval_linesz = compute_hozval(info->var.xres,
++					lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
++
+ 	/* Display size */
+-	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
++	value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ 	value |= info->var.yres - 1;
++	dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
+ 	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+ 
+ 	/* FIFO Threshold: Use formula from data sheet */
+@@ -421,6 +463,15 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
+ 			ret = 0;
+ 		}
+ 		break;
++
++	case FB_VISUAL_MONO01:
++		if (regno < 2) {
++			val = (regno == 0) ? 0x00 : 0x1F;
++			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
++			ret = 0;
++		}
++		break;
++
+ 	}
+ 
+ 	return ret;
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index fbef663..b6f936a 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
+ 	  Enable this to be able to choose the drivers for controlling the
+ 	  backlight and the LCD panel on some platforms, for example on PDAs.
+ 
+-config BACKLIGHT_CLASS_DEVICE
+-        tristate "Lowlevel Backlight controls"
++#
++# LCD
++#
++config LCD_CLASS_DEVICE
++        tristate "Lowlevel LCD controls"
+ 	depends on BACKLIGHT_LCD_SUPPORT
+ 	default m
+ 	help
+-	  This framework adds support for low-level control of the LCD
+-          backlight. This includes support for brightness and power.
++	  This framework adds support for low-level control of LCD.
++	  Some framebuffer devices connect to platform-specific LCD modules
++	  in order to have a platform-specific way to control the flat panel
++	  (contrast and applying power to the LCD (not to the backlight!)).
+ 
+ 	  To have support for your specific LCD panel you will have to
+ 	  select the proper drivers which depend on this option.
+ 
+-config LCD_CLASS_DEVICE
+-        tristate "Lowlevel LCD controls"
++config LCD_LTV350QV
++	tristate "Samsung LTV350QV LCD Panel"
++	depends on LCD_CLASS_DEVICE && SPI_MASTER
++	default n
++	help
++	  If you have a Samsung LTV350QV LCD panel, say y to include a
++	  power control driver for it.  The panel starts up in power
++	  off state, so you need this driver in order to see any
++	  output.
++
++	  The LTV350QV panel is present on all ATSTK1000 boards.
++
++#
++# Backlight
++#
++config BACKLIGHT_CLASS_DEVICE
++        tristate "Lowlevel Backlight controls"
+ 	depends on BACKLIGHT_LCD_SUPPORT
+ 	default m
+ 	help
+-	  This framework adds support for low-level control of LCD.
+-	  Some framebuffer devices connect to platform-specific LCD modules
+-	  in order to have a platform-specific way to control the flat panel
+-	  (contrast and applying power to the LCD (not to the backlight!)).
++	  This framework adds support for low-level control of the LCD
++          backlight. This includes support for brightness and power.
+ 
+ 	  To have support for your specific LCD panel you will have to
+ 	  select the proper drivers which depend on this option.
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index c6e2266..965a78b 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -1,6 +1,8 @@
+ # Backlight & LCD drivers
+ 
+ obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
++obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
++
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
+diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
+new file mode 100644
+index 0000000..342b97a
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.c
+@@ -0,0 +1,340 @@
++/*
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++
++#include "ltv350qv.h"
++
++#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++	struct spi_device	*spi;
++	u8			*buffer;
++	int			power;
++	struct lcd_device	*ld;
++};
++
++/*
++ * The power-on and power-off sequences are taken from the
++ * LTV350QV-F04 data sheet from Samsung. The register definitions are
++ * taken from the S6F2002 command list also from Samsung. Both
++ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
++ *
++ * There's still some voodoo going on here, but it's a lot better than
++ * in the first incarnation of the driver where all we had was the raw
++ * numbers from the initialization sequence.
++ */
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++{
++	struct spi_message msg;
++	struct spi_transfer index_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
++	struct spi_transfer value_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
++
++	spi_message_init(&msg);
++
++	/* register index */
++	lcd->buffer[0] = LTV_OPC_INDEX;
++	lcd->buffer[1] = 0x00;
++	lcd->buffer[2] = reg & 0x7f;
++	index_xfer.tx_buf = lcd->buffer;
++	spi_message_add_tail(&index_xfer, &msg);
++
++	/* register value */
++	lcd->buffer[4] = LTV_OPC_DATA;
++	lcd->buffer[5] = val >> 8;
++	lcd->buffer[6] = val;
++	value_xfer.tx_buf = lcd->buffer + 4;
++	spi_message_add_tail(&value_xfer, &msg);
++
++	return spi_sync(lcd->spi, &msg);
++}
++
++/* The comments are taken straight from the data sheet */
++static int ltv350qv_power_on(struct ltv350qv *lcd)
++{
++	int ret;
++
++	/* Power On Reset Display off State */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
++		goto err;
++	msleep(15);
++
++	/* Power Setting Function 1 */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
++		goto err;
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
++		goto err_power1;
++
++	/* Power Setting Function 2 */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++			       | LTV_SUPPLY_CURRENT(5)))
++		goto err_power2;
++
++	msleep(55);
++
++	/* Instruction Setting */
++	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
++				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
++	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
++				  LTV_DS_SAME | LTV_CHS_480
++				  | LTV_DF_RGB | LTV_RGB_BGR);
++	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
++				  LTV_VSPL_ACTIVE_LOW
++				  | LTV_HSPL_ACTIVE_LOW
++				  | LTV_DPL_SAMPLE_RISING
++				  | LTV_EPL_ACTIVE_LOW
++				  | LTV_SS_RIGHT_TO_LEFT);
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_FWI(3));
++	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
++	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
++	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
++	if (ret)
++		goto err_settings;
++
++	/* Wait more than 2 frames */
++	msleep(20);
++
++	/* Display On Sequence */
++	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
++				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
++				 | LTV_SUPPLY_CURRENT(5));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
++	if (ret)
++		goto err_disp_on;
++
++	/* Display should now be ON. Phew. */
++	return 0;
++
++err_disp_on:
++	/*
++	 * Try to recover. Error handling probably isn't very useful
++	 * at this point, just make a best effort to switch the panel
++	 * off.
++	 */
++	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++			   | LTV_SUPPLY_CURRENT(5));
++	ltv350qv_write_reg(lcd, LTV_GATECTL2,
++			   LTV_NW_INV_1LINE | LTV_FWI(3));
++err_settings:
++err_power2:
++err_power1:
++	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++	msleep(1);
++err:
++	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++	return -EIO;
++}
++
++static int ltv350qv_power_off(struct ltv350qv *lcd)
++{
++	int ret;
++
++	/* Display Off Sequence */
++	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++				 LTV_VCOM_DISABLE
++				 | LTV_DRIVE_CURRENT(5)
++				 | LTV_SUPPLY_CURRENT(5));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_FWI(3));
++
++	/* Power down setting 1 */
++	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++
++	/* Wait at least 1 ms */
++	msleep(1);
++
++	/* Power down setting 2 */
++	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++
++	/*
++	 * No point in trying to recover here. If we can't switch the
++	 * panel off, what are we supposed to do other than inform the
++	 * user about the failure?
++	 */
++	if (ret)
++		return -EIO;
++
++	/* Display power should now be OFF */
++	return 0;
++}
++
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
++{
++	int ret = 0;
++
++	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++		ret = ltv350qv_power_on(lcd);
++	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++		ret = ltv350qv_power_off(lcd);
++
++	if (!ret)
++		lcd->power = power;
++
++	return ret;
++}
++
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
++{
++	struct ltv350qv *lcd;
++
++	lcd = class_get_devdata(&ld->class_dev);
++	return ltv350qv_power(lcd, power);
++}
++
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++	struct ltv350qv *lcd;
++
++	lcd = class_get_devdata(&ld->class_dev);
++	return lcd->power;
++}
++
++static struct lcd_ops ltv_ops = {
++	.get_power	= ltv350qv_get_power,
++	.set_power	= ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++	struct ltv350qv *lcd;
++	struct lcd_device *ld;
++	int ret;
++
++	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++	if (!lcd)
++		return -ENOMEM;
++
++	lcd->spi = spi;
++	lcd->power = FB_BLANK_POWERDOWN;
++	lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++	ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
++	if (IS_ERR(ld)) {
++		ret = PTR_ERR(ld);
++		goto out_free_lcd;
++	}
++	lcd->ld = ld;
++
++	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++	if (ret)
++		goto out_unregister;
++
++	dev_set_drvdata(&spi->dev, lcd);
++
++	return 0;
++
++out_unregister:
++	lcd_device_unregister(ld);
++out_free_lcd:
++	kfree(lcd);
++	return ret;
++}
++
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++	lcd_device_unregister(lcd->ld);
++	kfree(lcd);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int ltv350qv_suspend(struct spi_device *spi,
++			    pm_message_t state, u32 level)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	if (level == SUSPEND_POWER_DOWN)
++		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++
++	return 0;
++}
++
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	if (level == RESUME_POWER_ON)
++		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++
++	return 0;
++}
++#else
++#define ltv350qv_suspend	NULL
++#define ltv350qv_resume		NULL
++#endif
++
++/* Power down all displays on reboot, poweroff or halt */
++static void ltv350qv_shutdown(struct spi_device *spi)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++}
++
++static struct spi_driver ltv350qv_driver = {
++	.driver = {
++		.name		= "ltv350qv",
++		.bus		= &spi_bus_type,
++		.owner		= THIS_MODULE,
++	},
++
++	.probe		= ltv350qv_probe,
++	.remove		= __devexit_p(ltv350qv_remove),
++	.shutdown	= ltv350qv_shutdown,
++	.suspend	= ltv350qv_suspend,
++	.resume		= ltv350qv_resume,
++};
++
++static int __init ltv350qv_init(void)
++{
++	return spi_register_driver(&ltv350qv_driver);
++}
++
++static void __exit ltv350qv_exit(void)
++{
++	spi_unregister_driver(&ltv350qv_driver);
++}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
+new file mode 100644
+index 0000000..189112e
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.h
+@@ -0,0 +1,95 @@
++/*
++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LTV350QV_H
++#define __LTV350QV_H
++
++#define LTV_OPC_INDEX	0x74
++#define LTV_OPC_DATA	0x76
++
++#define LTV_ID		0x00		/* ID Read */
++#define LTV_IFCTL	0x01		/* Display Interface Control */
++#define LTV_DATACTL	0x02		/* Display Data Control */
++#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
++#define LTV_GATECTL1	0x04		/* Gate Control 1 */
++#define LTV_GATECTL2	0x05		/* Gate Control 2 */
++#define LTV_VBP		0x06		/* Vertical Back Porch */
++#define LTV_HBP		0x07		/* Horizontal Back Porch */
++#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
++#define LTV_PWRCTL1	0x09		/* Power Control 1 */
++#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
++#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
++
++/* Bit definitions for LTV_IFCTL */
++#define LTV_IM			(1 << 15)
++#define LTV_NMD			(1 << 14)
++#define LTV_SSMD		(1 << 13)
++#define LTV_REV			(1 <<  7)
++#define LTV_NL(x)		(((x) & 0x001f) << 0)
++
++/* Bit definitions for LTV_DATACTL */
++#define LTV_DS_SAME		(0 << 12)
++#define LTV_DS_D_TO_S		(1 << 12)
++#define LTV_DS_S_TO_D		(2 << 12)
++#define LTV_CHS_384		(0 <<  9)
++#define LTV_CHS_480		(1 <<  9)
++#define LTV_CHS_492		(2 <<  9)
++#define LTV_DF_RGB		(0 <<  6)
++#define LTV_DF_RGBX		(1 <<  6)
++#define LTV_DF_XRGB		(2 <<  6)
++#define LTV_RGB_RGB		(0 <<  2)
++#define LTV_RGB_BGR		(1 <<  2)
++#define LTV_RGB_GRB		(2 <<  2)
++#define LTV_RGB_RBG		(3 <<  2)
++
++/* Bit definitions for LTV_ENTRY_MODE */
++#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
++#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
++#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
++#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
++#define LTV_DPL_SAMPLE_RISING	(0 << 13)
++#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
++#define LTV_EPL_ACTIVE_LOW	(0 << 12)
++#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
++#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
++#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
++#define LTV_STB			(1 <<  1)
++
++/* Bit definitions for LTV_GATECTL1 */
++#define LTV_CLW(x)		(((x) & 0x0007) << 12)
++#define LTV_GAON		(1 <<  5)
++#define LTV_SDR			(1 <<  3)
++
++/* Bit definitions for LTV_GATECTL2 */
++#define LTV_NW_INV_FRAME	(0 << 14)
++#define LTV_NW_INV_1LINE	(1 << 14)
++#define LTV_NW_INV_2LINE	(2 << 14)
++#define LTV_DSC			(1 << 12)
++#define LTV_GIF			(1 <<  8)
++#define LTV_FHN			(1 <<  7)
++#define LTV_FTI(x)		(((x) & 0x0003) << 4)
++#define LTV_FWI(x)		(((x) & 0x0003) << 0)
++
++/* Bit definitions for LTV_SOTCTL */
++#define LTV_SDT(x)		(((x) & 0x0007) << 10)
++#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
++
++/* Bit definitions for LTV_PWRCTL1 */
++#define LTV_VCOM_DISABLE	(1 << 14)
++#define LTV_VCOMOUT_ENABLE	(1 << 11)
++#define LTV_POWER_ON		(1 <<  9)
++#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
++#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
++
++/* Bit definitions for LTV_PWRCTL2 */
++#define LTV_VCOML_ENABLE	(1 << 13)
++#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
++#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
++
++#endif /* __LTV350QV_H */
+diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
+index 0ce6ee9..d96b10f 100644
+--- a/include/asm-arm/arch-at91/board.h
++++ b/include/asm-arm/arch-at91/board.h
+@@ -64,6 +64,7 @@ extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+ 
+  /* Ethernet (EMAC & MACB) */
+ struct at91_eth_data {
++	u32		phy_mask;
+ 	u8		phy_irq_pin;	/* PHY IRQ */
+ 	u8		is_rmii;	/* using RMII interface? */
+ };
+diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
+index 9fd2e32..9b36eb8 100644
+--- a/include/asm-avr32/arch-at32ap/board.h
++++ b/include/asm-avr32/arch-at32ap/board.h
+@@ -6,6 +6,8 @@
+ 
+ #include <linux/types.h>
+ 
++#define GPIO_PIN_NONE	(-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+ 
+@@ -21,6 +23,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line);
+ struct platform_device *at32_add_device_usart(unsigned int id);
+ 
+ struct eth_platform_data {
++	u32	phy_mask;
+ 	u8	is_rmii;
+ };
+ struct platform_device *
+@@ -30,9 +33,41 @@ struct spi_board_info;
+ struct platform_device *
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+ 
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++	int detect_pin;
++	int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++
++struct usba_platform_data {
++	int vbus_pin;
++};
++struct platform_device *
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
++
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ 		     unsigned long fbmem_start, unsigned long fbmem_len);
+ 
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++
++/* depending on what's hooked up, not all SSC pins will be used */
++#define	ATMEL_SSC_TK		0x01
++#define	ATMEL_SSC_TF		0x02
++#define	ATMEL_SSC_TD		0x04
++#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
++
++#define	ATMEL_SSC_RK		0x10
++#define	ATMEL_SSC_RF		0x20
++#define	ATMEL_SSC_RD		0x40
++#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
++
++struct platform_device *
++at32_add_device_ssc(unsigned int id, unsigned int flags);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
+index 9930871..0f95567 100644
+--- a/include/asm-avr32/arch-at32ap/portmux.h
++++ b/include/asm-avr32/arch-at32ap/portmux.h
+@@ -25,4 +25,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/sm.h b/include/asm-avr32/arch-at32ap/sm.h
+deleted file mode 100644
+index 265a9ea..0000000
+--- a/include/asm-avr32/arch-at32ap/sm.h
++++ /dev/null
+@@ -1,27 +0,0 @@
+-/*
+- * AT32 System Manager interface.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_AVR32_AT32_SM_H__
+-#define __ASM_AVR32_AT32_SM_H__
+-
+-struct irq_chip;
+-struct platform_device;
+-
+-struct at32_sm {
+-	spinlock_t lock;
+-	void __iomem *regs;
+-	struct irq_chip *eim_chip;
+-	unsigned int eim_first_irq;
+-	struct platform_device *pdev;
+-};
+-
+-extern struct platform_device at32_sm_device;
+-extern struct at32_sm system_manager;
+-
+-#endif /* __ASM_AVR32_AT32_SM_H__ */
+diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
+index b9c2548..7ef3862 100644
+--- a/include/asm-avr32/atomic.h
++++ b/include/asm-avr32/atomic.h
+@@ -101,7 +101,7 @@ static inline int atomic_sub_unless(atomic_t *v, int a, int u)
+ 		"	mov	%1, 1\n"
+ 		"1:"
+ 		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+-		: "m"(v->counter), "rKs21"(a), "rKs21"(u)
++		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
+ 		: "cc", "memory");
+ 
+ 	return result;
+@@ -137,7 +137,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
+ 			"	mov	%1, 1\n"
+ 			"1:"
+ 			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+-			: "m"(v->counter), "r"(a), "ir"(u)
++			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
+ 			: "cc", "memory");
+ 	}
+ 
+diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
+new file mode 100644
+index 0000000..56a4965
+--- /dev/null
++++ b/include/asm-avr32/dma-controller.h
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM		0x0000
++#define DMA_DIR_MEM_TO_PERIPH		0x0001
++#define DMA_DIR_PERIPH_TO_MEM		0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
++
++#define DMA_WIDTH_8BIT			0
++#define DMA_WIDTH_16BIT			1
++#define DMA_WIDTH_32BIT			2
++
++struct dma_request {
++	struct dma_controller *dmac;
++	struct list_head list;
++
++	unsigned short channel;
++
++	void (*xfer_complete)(struct dma_request *req);
++	void (*block_complete)(struct dma_request *req);
++	void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++	struct dma_request req;
++
++	int nr_sg;
++	struct scatterlist *sg;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++
++	dma_addr_t data_reg;
++	unsigned short periph_id;
++
++	unsigned char direction;
++	unsigned char width;
++};
++#define to_dma_request_sg(_req)				\
++	container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++	struct dma_request req;
++
++        int periods;
++	unsigned long buffer_size;
++
++        dma_addr_t buffer_start;
++	dma_addr_t data_reg;
++
++	unsigned short periph_id;
++	unsigned char direction;
++	unsigned char width;
++
++        void *dev_id;
++};
++#define to_dma_request_cyclic(_req)				\
++	container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++	struct dma_request req;
++
++	dma_addr_t src_addr;
++	unsigned int src_width;
++	unsigned int src_stride;
++
++	dma_addr_t dst_addr;
++	unsigned int dst_width;
++	unsigned int dst_stride;
++
++	size_t length;
++
++	unsigned short src_reverse:1;
++	unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req)				\
++	container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++	struct list_head list;
++	int id;
++	struct device *dev;
++
++	int (*alloc_channel)(struct dma_controller *dmac);
++	void (*release_channel)(struct dma_controller *dmac,
++				int channel);
++	int (*prepare_request_sg)(struct dma_controller *dmac,
++				  struct dma_request_sg *req);
++        int (*prepare_request_cyclic)(struct dma_controller *dmac,
++				      struct dma_request_cyclic *req);
++	int (*prepare_request_memcpy)(struct dma_controller *dmac,
++				      struct dma_request_memcpy *req);
++	int (*start_request)(struct dma_controller *dmac,
++			     unsigned int channel);
++	int (*stop_request)(struct dma_controller *dmac,
++                            unsigned int channel);
++        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++                                      unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++	return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++	dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++		       struct dma_request_sg *req)
++{
++	return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++			   struct dma_request_cyclic *req)
++{
++	return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++			   struct dma_request_memcpy *req)
++{
++	return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++		  unsigned int channel)
++{
++	return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++                 unsigned int channel)
++{
++	return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++                    unsigned int channel)
++{
++	return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
+index 3042723..36f5fd4 100644
+--- a/include/asm-avr32/unaligned.h
++++ b/include/asm-avr32/unaligned.h
+@@ -7,19 +7,10 @@
+  * words, but halfwords must be halfword-aligned, and doublewords must
+  * be word-aligned.
+  *
+- * TODO: Make all this CPU-specific and optimize.
++ * However, swapped word loads must be word-aligned so we can't
++ * optimize word loads in general.
+  */
+ 
+-#include <linux/string.h>
+-
+-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
+-
+-#define get_unaligned(ptr) \
+-  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
+-
+-#define put_unaligned(val, ptr)				\
+-  ({ __typeof__(*(ptr)) __tmp = (val);			\
+-     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
+-     (void)0; })
++#include <asm-generic/unaligned.h>
+ 
+ #endif /* __ASM_AVR32_UNALIGNED_H */
+diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
+new file mode 100644
+index 0000000..0602339
+--- /dev/null
++++ b/include/linux/atmel-ssc.h
+@@ -0,0 +1,312 @@
++#ifndef __INCLUDE_ATMEL_SSC_H
++#define __INCLUDE_ATMEL_SSC_H
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++
++struct ssc_device {
++	struct list_head	list;
++	void __iomem		*regs;
++	struct platform_device	*pdev;
++	struct clk		*clk;
++	int			user;
++	int			irq;
++};
++
++struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
++void ssc_free(struct ssc_device *ssc);
++
++/* SSC register offsets */
++
++/* SSC Control Register */
++#define SSC_CR				0x00000000
++#define SSC_CR_RXDIS_SIZE			 1
++#define SSC_CR_RXDIS_OFFSET			 1
++#define SSC_CR_RXEN_SIZE			 1
++#define SSC_CR_RXEN_OFFSET			 0
++#define SSC_CR_SWRST_SIZE			 1
++#define SSC_CR_SWRST_OFFSET			15
++#define SSC_CR_TXDIS_SIZE			 1
++#define SSC_CR_TXDIS_OFFSET			 9
++#define SSC_CR_TXEN_SIZE			 1
++#define SSC_CR_TXEN_OFFSET			 8
++
++/* SSC Clock Mode Register */
++#define SSC_CMR				0x00000004
++#define SSC_CMR_DIV_SIZE			12
++#define SSC_CMR_DIV_OFFSET			 0
++
++/* SSC Receive Clock Mode Register */
++#define SSC_RCMR			0x00000010
++#define SSC_RCMR_CKG_SIZE			 2
++#define SSC_RCMR_CKG_OFFSET			 6
++#define SSC_RCMR_CKI_SIZE			 1
++#define SSC_RCMR_CKI_OFFSET			 5
++#define SSC_RCMR_CKO_SIZE			 3
++#define SSC_RCMR_CKO_OFFSET			 2
++#define SSC_RCMR_CKS_SIZE			 2
++#define SSC_RCMR_CKS_OFFSET			 0
++#define SSC_RCMR_PERIOD_SIZE			 8
++#define SSC_RCMR_PERIOD_OFFSET			24
++#define SSC_RCMR_START_SIZE			 4
++#define SSC_RCMR_START_OFFSET			 8
++#define SSC_RCMR_STOP_SIZE			 1
++#define SSC_RCMR_STOP_OFFSET			12
++#define SSC_RCMR_STTDLY_SIZE			 8
++#define SSC_RCMR_STTDLY_OFFSET			16
++
++/* SSC Receive Frame Mode Register */
++#define SSC_RFMR			0x00000014
++#define SSC_RFMR_DATLEN_SIZE			 5
++#define SSC_RFMR_DATLEN_OFFSET			 0
++#define SSC_RFMR_DATNB_SIZE			 4
++#define SSC_RFMR_DATNB_OFFSET			 8
++#define SSC_RFMR_FSEDGE_SIZE			 1
++#define SSC_RFMR_FSEDGE_OFFSET			24
++#define SSC_RFMR_FSLEN_SIZE			 4
++#define SSC_RFMR_FSLEN_OFFSET			16
++#define SSC_RFMR_FSOS_SIZE			 4
++#define SSC_RFMR_FSOS_OFFSET			20
++#define SSC_RFMR_LOOP_SIZE			 1
++#define SSC_RFMR_LOOP_OFFSET			 5
++#define SSC_RFMR_MSBF_SIZE			 1
++#define SSC_RFMR_MSBF_OFFSET			 7
++
++/* SSC Transmit Clock Mode Register */
++#define SSC_TCMR			0x00000018
++#define SSC_TCMR_CKG_SIZE			 2
++#define SSC_TCMR_CKG_OFFSET			 6
++#define SSC_TCMR_CKI_SIZE			 1
++#define SSC_TCMR_CKI_OFFSET			 5
++#define SSC_TCMR_CKO_SIZE			 3
++#define SSC_TCMR_CKO_OFFSET			 2
++#define SSC_TCMR_CKS_SIZE			 2
++#define SSC_TCMR_CKS_OFFSET			 0
++#define SSC_TCMR_PERIOD_SIZE			 8
++#define SSC_TCMR_PERIOD_OFFSET			24
++#define SSC_TCMR_START_SIZE			 4
++#define SSC_TCMR_START_OFFSET			 8
++#define SSC_TCMR_STTDLY_SIZE			 8
++#define SSC_TCMR_STTDLY_OFFSET			16
++
++/* SSC Transmit Frame Mode Register */
++#define SSC_TFMR			0x0000001c
++#define SSC_TFMR_DATDEF_SIZE			 1
++#define SSC_TFMR_DATDEF_OFFSET			 5
++#define SSC_TFMR_DATLEN_SIZE			 5
++#define SSC_TFMR_DATLEN_OFFSET			 0
++#define SSC_TFMR_DATNB_SIZE			 4
++#define SSC_TFMR_DATNB_OFFSET			 8
++#define SSC_TFMR_FSDEN_SIZE			 1
++#define SSC_TFMR_FSDEN_OFFSET			23
++#define SSC_TFMR_FSEDGE_SIZE			 1
++#define SSC_TFMR_FSEDGE_OFFSET			24
++#define SSC_TFMR_FSLEN_SIZE			 4
++#define SSC_TFMR_FSLEN_OFFSET			16
++#define SSC_TFMR_FSOS_SIZE			 3
++#define SSC_TFMR_FSOS_OFFSET			20
++#define SSC_TFMR_MSBF_SIZE			 1
++#define SSC_TFMR_MSBF_OFFSET			 7
++
++/* SSC Receive Hold Register */
++#define SSC_RHR				0x00000020
++#define SSC_RHR_RDAT_SIZE			32
++#define SSC_RHR_RDAT_OFFSET			 0
++
++/* SSC Transmit Hold Register */
++#define SSC_THR				0x00000024
++#define SSC_THR_TDAT_SIZE			32
++#define SSC_THR_TDAT_OFFSET			 0
++
++/* SSC Receive Sync. Holding Register */
++#define SSC_RSHR			0x00000030
++#define SSC_RSHR_RSDAT_SIZE			16
++#define SSC_RSHR_RSDAT_OFFSET			 0
++
++/* SSC Transmit Sync. Holding Register */
++#define SSC_TSHR			0x00000034
++#define SSC_TSHR_TSDAT_SIZE			16
++#define SSC_TSHR_RSDAT_OFFSET			 0
++
++/* SSC Receive Compare 0 Register */
++#define SSC_RC0R			0x00000038
++#define SSC_RC0R_CP0_SIZE			16
++#define SSC_RC0R_CP0_OFFSET			 0
++
++/* SSC Receive Compare 1 Register */
++#define SSC_RC1R			0x0000003c
++#define SSC_RC1R_CP1_SIZE			16
++#define SSC_RC1R_CP1_OFFSET			 0
++
++/* SSC Status Register */
++#define SSC_SR				0x00000040
++#define SSC_SR_CP0_SIZE				 1
++#define SSC_SR_CP0_OFFSET			 8
++#define SSC_SR_CP1_SIZE				 1
++#define SSC_SR_CP1_OFFSET			 9
++#define SSC_SR_ENDRX_SIZE			 1
++#define SSC_SR_ENDRX_OFFSET			 6
++#define SSC_SR_ENDTX_SIZE			 1
++#define SSC_SR_ENDTX_OFFSET			 2
++#define SSC_SR_OVRUN_SIZE			 1
++#define SSC_SR_OVRUN_OFFSET			 5
++#define SSC_SR_RXBUFF_SIZE			 1
++#define SSC_SR_RXBUFF_OFFSET			 7
++#define SSC_SR_RXEN_SIZE			 1
++#define SSC_SR_RXEN_OFFSET			17
++#define SSC_SR_RXRDY_SIZE			 1
++#define SSC_SR_RXRDY_OFFSET			 4
++#define SSC_SR_RXSYN_SIZE			 1
++#define SSC_SR_RXSYN_OFFSET			11
++#define SSC_SR_TXBUFE_SIZE			 1
++#define SSC_SR_TXBUFE_OFFSET			 3
++#define SSC_SR_TXEMPTY_SIZE			 1
++#define SSC_SR_TXEMPTY_OFFSET			 1
++#define SSC_SR_TXEN_SIZE			 1
++#define SSC_SR_TXEN_OFFSET			16
++#define SSC_SR_TXRDY_SIZE			 1
++#define SSC_SR_TXRDY_OFFSET			 0
++#define SSC_SR_TXSYN_SIZE			 1
++#define SSC_SR_TXSYN_OFFSET			10
++
++/* SSC Interrupt Enable Register */
++#define SSC_IER				0x00000044
++#define SSC_IER_CP0_SIZE			 1
++#define SSC_IER_CP0_OFFSET			 8
++#define SSC_IER_CP1_SIZE			 1
++#define SSC_IER_CP1_OFFSET			 9
++#define SSC_IER_ENDRX_SIZE			 1
++#define SSC_IER_ENDRX_OFFSET			 6
++#define SSC_IER_ENDTX_SIZE			 1
++#define SSC_IER_ENDTX_OFFSET			 2
++#define SSC_IER_OVRUN_SIZE			 1
++#define SSC_IER_OVRUN_OFFSET			 5
++#define SSC_IER_RXBUFF_SIZE			 1
++#define SSC_IER_RXBUFF_OFFSET			 7
++#define SSC_IER_RXRDY_SIZE			 1
++#define SSC_IER_RXRDY_OFFSET			 4
++#define SSC_IER_RXSYN_SIZE			 1
++#define SSC_IER_RXSYN_OFFSET			11
++#define SSC_IER_TXBUFE_SIZE			 1
++#define SSC_IER_TXBUFE_OFFSET			 3
++#define SSC_IER_TXEMPTY_SIZE			 1
++#define SSC_IER_TXEMPTY_OFFSET			 1
++#define SSC_IER_TXRDY_SIZE			 1
++#define SSC_IER_TXRDY_OFFSET			 0
++#define SSC_IER_TXSYN_SIZE			 1
++#define SSC_IER_TXSYN_OFFSET			10
++
++/* SSC Interrupt Disable Register */
++#define SSC_IDR				0x00000048
++#define SSC_IDR_CP0_SIZE			 1
++#define SSC_IDR_CP0_OFFSET			 8
++#define SSC_IDR_CP1_SIZE			 1
++#define SSC_IDR_CP1_OFFSET			 9
++#define SSC_IDR_ENDRX_SIZE			 1
++#define SSC_IDR_ENDRX_OFFSET			 6
++#define SSC_IDR_ENDTX_SIZE			 1
++#define SSC_IDR_ENDTX_OFFSET			 2
++#define SSC_IDR_OVRUN_SIZE			 1
++#define SSC_IDR_OVRUN_OFFSET			 5
++#define SSC_IDR_RXBUFF_SIZE			 1
++#define SSC_IDR_RXBUFF_OFFSET			 7
++#define SSC_IDR_RXRDY_SIZE			 1
++#define SSC_IDR_RXRDY_OFFSET			 4
++#define SSC_IDR_RXSYN_SIZE			 1
++#define SSC_IDR_RXSYN_OFFSET			11
++#define SSC_IDR_TXBUFE_SIZE			 1
++#define SSC_IDR_TXBUFE_OFFSET			 3
++#define SSC_IDR_TXEMPTY_SIZE			 1
++#define SSC_IDR_TXEMPTY_OFFSET			 1
++#define SSC_IDR_TXRDY_SIZE			 1
++#define SSC_IDR_TXRDY_OFFSET			 0
++#define SSC_IDR_TXSYN_SIZE			 1
++#define SSC_IDR_TXSYN_OFFSET			10
++
++/* SSC Interrupt Mask Register */
++#define SSC_IMR				0x0000004c
++#define SSC_IMR_CP0_SIZE			 1
++#define SSC_IMR_CP0_OFFSET			 8
++#define SSC_IMR_CP1_SIZE			 1
++#define SSC_IMR_CP1_OFFSET			 9
++#define SSC_IMR_ENDRX_SIZE			 1
++#define SSC_IMR_ENDRX_OFFSET			 6
++#define SSC_IMR_ENDTX_SIZE			 1
++#define SSC_IMR_ENDTX_OFFSET			 2
++#define SSC_IMR_OVRUN_SIZE			 1
++#define SSC_IMR_OVRUN_OFFSET			 5
++#define SSC_IMR_RXBUFF_SIZE			 1
++#define SSC_IMR_RXBUFF_OFFSET			 7
++#define SSC_IMR_RXRDY_SIZE			 1
++#define SSC_IMR_RXRDY_OFFSET			 4
++#define SSC_IMR_RXSYN_SIZE			 1
++#define SSC_IMR_RXSYN_OFFSET			11
++#define SSC_IMR_TXBUFE_SIZE			 1
++#define SSC_IMR_TXBUFE_OFFSET			 3
++#define SSC_IMR_TXEMPTY_SIZE			 1
++#define SSC_IMR_TXEMPTY_OFFSET			 1
++#define SSC_IMR_TXRDY_SIZE			 1
++#define SSC_IMR_TXRDY_OFFSET			 0
++#define SSC_IMR_TXSYN_SIZE			 1
++#define SSC_IMR_TXSYN_OFFSET			10
++
++/* SSC PDC Receive Pointer Register */
++#define SSC_PDC_RPR			0x00000100
++
++/* SSC PDC Receive Counter Register */
++#define SSC_PDC_RCR			0x00000104
++
++/* SSC PDC Transmit Pointer Register */
++#define SSC_PDC_TPR			0x00000108
++
++/* SSC PDC Receive Next Pointer Register */
++#define SSC_PDC_RNPR			0x00000110
++
++/* SSC PDC Receive Next Counter Register */
++#define SSC_PDC_RNCR			0x00000114
++
++/* SSC PDC Transmit Counter Register */
++#define SSC_PDC_TCR			0x0000010c
++
++/* SSC PDC Transmit Next Pointer Register */
++#define SSC_PDC_TNPR			0x00000118
++
++/* SSC PDC Transmit Next Counter Register */
++#define SSC_PDC_TNCR			0x0000011c
++
++/* SSC PDC Transfer Control Register */
++#define SSC_PDC_PTCR			0x00000120
++#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
++#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
++#define SSC_PDC_PTCR_RXTEN_SIZE			 1
++#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
++#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
++#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
++#define SSC_PDC_PTCR_TXTEN_SIZE			 1
++#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
++
++/* SSC PDC Transfer Status Register */
++#define SSC_PDC_PTSR			0x00000124
++#define SSC_PDC_PTSR_RXTEN_SIZE			 1
++#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
++#define SSC_PDC_PTSR_TXTEN_SIZE			 1
++#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
++
++/* Bit manipulation macros */
++#define SSC_BIT(name)					\
++	(1 << SSC_##name##_OFFSET)
++#define SSC_BF(name, value)				\
++	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
++	 << SSC_##name##_OFFSET)
++#define SSC_BFEXT(name, value)				\
++	(((value) >> SSC_##name##_OFFSET)		\
++	 & ((1 << SSC_##name##_SIZE) - 1))
++#define SSC_BFINS(name, value, old)			\
++	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
++	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
++
++/* Register access macros */
++#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
++#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
++
++#endif /* __INCLUDE_ATMEL_SSC_H */
+diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
+new file mode 100644
+index 0000000..44ed7aa
+--- /dev/null
++++ b/include/linux/gpio_mouse.h
+@@ -0,0 +1,61 @@
++/*
++ * Driver for simulating a mouse on GPIO lines.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GPIO_MOUSE_H
++#define _GPIO_MOUSE_H
++
++#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
++#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
++
++#define GPIO_MOUSE_PIN_UP	0
++#define GPIO_MOUSE_PIN_DOWN	1
++#define GPIO_MOUSE_PIN_LEFT	2
++#define GPIO_MOUSE_PIN_RIGHT	3
++#define GPIO_MOUSE_PIN_BLEFT	4
++#define GPIO_MOUSE_PIN_BMIDDLE	5
++#define GPIO_MOUSE_PIN_BRIGHT	6
++#define GPIO_MOUSE_PIN_MAX	7
++
++/**
++ * struct gpio_mouse_platform_data
++ * @scan_ms: integer in ms specifying the scan periode.
++ * @polarity: Pin polarity, active high or low.
++ * @up: GPIO line for up value.
++ * @down: GPIO line for down value.
++ * @left: GPIO line for left value.
++ * @right: GPIO line for right value.
++ * @bleft: GPIO line for left button.
++ * @bmiddle: GPIO line for middle button.
++ * @bright: GPIO line for right button.
++ *
++ * This struct must be added to the platform_device in the board code.
++ * It is used by the gpio_mouse driver to setup GPIO lines and to
++ * calculate mouse movement.
++ */
++struct gpio_mouse_platform_data {
++	int scan_ms;
++	int polarity;
++
++	union {
++		struct {
++			int up;
++			int down;
++			int left;
++			int right;
++
++			int bleft;
++			int bmiddle;
++			int bright;
++		};
++		int pins[GPIO_MOUSE_PIN_MAX];
++	};
++};
++
++#endif /* _GPIO_MOUSE_H */
+diff --git a/include/linux/leds.h b/include/linux/leds.h
+index 88afcef..059abfe 100644
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -110,4 +110,18 @@ extern void ledtrig_ide_activity(void);
+ #define ledtrig_ide_activity() do {} while(0)
+ #endif
+ 
++/* For the leds-gpio driver */
++struct gpio_led {
++	const char *name;
++	char *default_trigger;
++	unsigned 	gpio;
++	u8 		active_low;
++};
++
++struct gpio_led_platform_data {
++	int 		num_leds;
++	struct gpio_led *leds;
++};
++
++
+ #endif		/* __LINUX_LEDS_H_INCLUDED */
+diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
+new file mode 100644
+index 0000000..0f20a70
+--- /dev/null
++++ b/include/linux/spi/at73c213.h
+@@ -0,0 +1,25 @@
++/*
++ * Board-specific data used to set up AT73c213 audio DAC driver.
++ */
++
++#ifndef __LINUX_SPI_AT73C213_H
++#define __LINUX_SPI_AT73C213_H
++
++/**
++ * at73c213_board_info - how the external DAC is wired to the device.
++ *
++ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
++ * @dac_clk: the external clock used to provide master clock to the DAC.
++ * @shortname: a short discription for the DAC, seen by userspace tools.
++ *
++ * This struct contains the configuration of the hardware connection to the
++ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
++ * provides a name which is used to identify it in userspace tools.
++ */
++struct at73c213_board_info {
++	int		ssc_id;
++	struct clk	*dac_clk;
++	char		shortname[32];
++};
++
++#endif /* __LINUX_SPI_AT73C213_H */
+diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
+index 43f160c..6ce42bf 100644
+--- a/include/linux/usb/Kbuild
++++ b/include/linux/usb/Kbuild
+@@ -1,5 +1,6 @@
+ unifdef-y += audio.h
+ unifdef-y += cdc.h
+ unifdef-y += ch9.h
++unifdef-y += gadgetfs.h
+ unifdef-y += midi.h
+ 
+diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
+new file mode 100644
+index 0000000..e8654c3
+--- /dev/null
++++ b/include/linux/usb/gadgetfs.h
+@@ -0,0 +1,81 @@
++#ifndef __LINUX_USB_GADGETFS_H
++#define __LINUX_USB_GADGETFS_H
++
++#include <asm/types.h>
++#include <asm/ioctl.h>
++
++#include <linux/usb/ch9.h>
++
++/*
++ * Filesystem based user-mode API to USB Gadget controller hardware
++ *
++ * Other than ep0 operations, most things are done by read() and write()
++ * on endpoint files found in one directory.  They are configured by
++ * writing descriptors, and then may be used for normal stream style
++ * i/o requests.  When ep0 is configured, the device can enumerate;
++ * when it's closed, the device disconnects from usb.  Operations on
++ * ep0 require ioctl() operations.
++ *
++ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
++ * which may then be used to read usb_gadgetfs_event structs.  The driver
++ * may activate endpoints as it handles SET_CONFIGURATION setup events,
++ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
++ * then performing data transfers by reading or writing.
++ */
++
++/*
++ * Events are delivered on the ep0 file descriptor, when the user mode driver
++ * reads from this file descriptor after writing the descriptors.  Don't
++ * stop polling this descriptor.
++ */
++
++enum usb_gadgetfs_event_type {
++	GADGETFS_NOP = 0,
++
++	GADGETFS_CONNECT,
++	GADGETFS_DISCONNECT,
++	GADGETFS_SETUP,
++	GADGETFS_SUSPEND,
++	// and likely more !
++};
++
++/* NOTE:  this structure must stay the same size and layout on
++ * both 32-bit and 64-bit kernels.
++ */
++struct usb_gadgetfs_event {
++	union {
++		// NOP, DISCONNECT, SUSPEND: nothing
++		// ... some hardware can't report disconnection
++
++		// CONNECT: just the speed
++		enum usb_device_speed	speed;
++
++		// SETUP: packet; DATA phase i/o precedes next event
++		// (setup.bmRequestType & USB_DIR_IN) flags direction
++		// ... includes SET_CONFIGURATION, SET_INTERFACE
++		struct usb_ctrlrequest	setup;
++	} u;
++	enum usb_gadgetfs_event_type	type;
++};
++
++
++/* endpoint ioctls */
++
++/* IN transfers may be reported to the gadget driver as complete
++ *	when the fifo is loaded, before the host reads the data;
++ * OUT transfers may be reported to the host's "client" driver as
++ *	complete when they're sitting in the FIFO unread.
++ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
++ * (needed for precise fault handling, when the hardware allows it)
++ */
++#define	GADGETFS_FIFO_STATUS	_IO('g',1)
++
++/* discards any unclaimed data in the fifo. */
++#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
++
++/* resets endpoint halt+toggle; used to implement set_interface.
++ * some hardware (like pxa2xx) can't support this.
++ */
++#define	GADGETFS_CLEAR_HALT	_IO('g',3)
++
++#endif /* __LINUX_USB_GADGETFS_H */
+diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h
+deleted file mode 100644
+index 8086d5a..0000000
+--- a/include/linux/usb_gadgetfs.h
++++ /dev/null
+@@ -1,75 +0,0 @@
+-
+-#include <asm/types.h>
+-#include <asm/ioctl.h>
+-
+-#include <linux/usb/ch9.h>
+-
+-/*
+- * Filesystem based user-mode API to USB Gadget controller hardware
+- *
+- * Almost everything can be done with only read and write operations,
+- * on endpoint files found in one directory.  They are configured by
+- * writing descriptors, and then may be used for normal stream style
+- * i/o requests.  When ep0 is configured, the device can enumerate;
+- * when it's closed, the device disconnects from usb.
+- *
+- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+- * which may then be used to read usb_gadgetfs_event structs.  The driver
+- * may activate endpoints as it handles SET_CONFIGURATION setup events,
+- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+- * then performing data transfers by reading or writing.
+- */
+-
+-/*
+- * Events are delivered on the ep0 file descriptor, if the user mode driver
+- * reads from this file descriptor after writing the descriptors.  Don't
+- * stop polling this descriptor, if you write that kind of driver.
+- */
+-
+-enum usb_gadgetfs_event_type {
+-	GADGETFS_NOP = 0,
+-
+-	GADGETFS_CONNECT,
+-	GADGETFS_DISCONNECT,
+-	GADGETFS_SETUP,
+-	GADGETFS_SUSPEND,
+-	// and likely more !
+-};
+-
+-struct usb_gadgetfs_event {
+-	enum usb_gadgetfs_event_type	type;
+-	union {
+-		// NOP, DISCONNECT, SUSPEND: nothing
+-		// ... some hardware can't report disconnection
+-
+-		// CONNECT: just the speed
+-		enum usb_device_speed	speed;
+-
+-		// SETUP: packet; DATA phase i/o precedes next event
+-		// (setup.bmRequestType & USB_DIR_IN) flags direction 
+-		// ... includes SET_CONFIGURATION, SET_INTERFACE
+-		struct usb_ctrlrequest	setup;
+-	} u;
+-};
+-
+-
+-/* endpoint ioctls */
+-
+-/* IN transfers may be reported to the gadget driver as complete
+- * 	when the fifo is loaded, before the host reads the data;
+- * OUT transfers may be reported to the host's "client" driver as
+- * 	complete when they're sitting in the FIFO unread.
+- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+- * (needed for precise fault handling, when the hardware allows it)
+- */
+-#define	GADGETFS_FIFO_STATUS	_IO('g',1)
+-
+-/* discards any unclaimed data in the fifo. */
+-#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
+-
+-/* resets endpoint halt+toggle; used to implement set_interface.
+- * some hardware (like pxa2xx) can't support this.
+- */
+-#define	GADGETFS_CLEAR_HALT	_IO('g',3)
+-
+-
+diff --git a/init/do_mounts.c b/init/do_mounts.c
+index 46fe407..efc134c 100644
+--- a/init/do_mounts.c
++++ b/init/do_mounts.c
+@@ -25,6 +25,7 @@ int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
+ int root_mountflags = MS_RDONLY | MS_SILENT;
+ char * __initdata root_device_name;
+ static char __initdata saved_root_name[64];
++int __initdata root_wait;
+ 
+ dev_t ROOT_DEV;
+ 
+@@ -216,6 +217,14 @@ static int __init root_dev_setup(char *line)
+ 
+ __setup("root=", root_dev_setup);
+ 
++static int __init rootwait_setup(char *line)
++{
++	root_wait = simple_strtol(line,NULL,0);
++	return 1;
++}
++
++__setup("rootwait=", rootwait_setup);
++
+ static char * __initdata root_mount_data;
+ static int __init root_data_setup(char *str)
+ {
+@@ -438,11 +447,24 @@ void __init prepare_namespace(void)
+ 			root_device_name += 5;
+ 	}
+ 
+-	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+-
+ 	if (initrd_load())
+ 		goto out;
+ 
++	/* wait for any asynchronous scanning to complete */
++	if ((ROOT_DEV == 0) && root_wait) {
++		printk(KERN_INFO "Waiting for root device %s...\n",
++			saved_root_name);
++		do {
++			while (driver_probe_done() != 0)
++				msleep(100);
++			ROOT_DEV = name_to_dev_t(saved_root_name);
++			if (ROOT_DEV == 0)
++				msleep(100);
++		} while (ROOT_DEV == 0);
++	}
++
++	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
++
+ 	if (is_floppy && rd_doload && rd_load_disk(0))
+ 		ROOT_DEV = Root_RAM0;
+ 
+diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
+index f7844f6..6631586 100755
+--- a/scripts/checkstack.pl
++++ b/scripts/checkstack.pl
+@@ -12,6 +12,7 @@
+ #	sh64 port by Paul Mundt
+ #	Random bits by Matt Mackall <mpm@selenic.com>
+ #	M68k port by Geert Uytterhoeven and Andreas Schwab
++#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ #	Usage:
+ #	objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
+ 	if ($arch eq 'arm') {
+ 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
+ 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++	} elsif ($arch eq 'avr32') {
++		#8000008a:       20 1d           sub sp,4
++		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
++		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ 	} elsif ($arch =~ /^i[3456]86$/) {
+ 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
+ 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
+diff --git a/sound/Kconfig b/sound/Kconfig
+index 9ea4738..9217739 100644
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -63,9 +63,13 @@ source "sound/aoa/Kconfig"
+ 
+ source "sound/arm/Kconfig"
+ 
++if SPI
++source "sound/spi/Kconfig"
++endif
++
+ source "sound/mips/Kconfig"
+ 
+-# the following will depend on the order of config.
++# tee following will depend on the order of config.
+ # here assuming USB is defined before ALSA
+ source "sound/usb/Kconfig"
+ 
+diff --git a/sound/Makefile b/sound/Makefile
+index b7c7fb7..581ea5e 100644
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
+ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
++		      sparc/ spi/ parisc/ pcmcia/ mips/ soc/
+ obj-$(CONFIG_SND_AOA) += aoa/
+ 
+ # This one must be compilable even if sound is configured out
+diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
+new file mode 100644
+index 0000000..0d08c29
+--- /dev/null
++++ b/sound/spi/Kconfig
+@@ -0,0 +1,31 @@
++#SPI drivers
++
++menu "SPI devices"
++	depends on SND != n
++
++config SND_AT73C213
++	tristate "Atmel AT73C213 DAC driver"
++	depends on ATMEL_SSC
++	select SND_PCM
++	help
++	  Say Y here if you want to use the Atmel AT73C213 external DAC. This
++	  DAC can be found on Atmel development boards.
++
++	  This driver requires the Atmel SSC driver for sound sink, a
++	  peripheral found on most AT91 and AVR32 microprocessors.
++
++	  To compile this driver as a module, choose M here: the module will be
++	  called snd-at73c213.
++
++config SND_AT73C213_TARGET_BITRATE
++	int "Target bitrate for AT73C213"
++	depends on SND_AT73C213
++	default "48000"
++	range 8000 50000
++	help
++	  Sets the target bitrate for the bitrate calculator in the driver.
++	  Limited by hardware to be between 8000 Hz and 50000 Hz.
++
++	  Set to 48000 Hz by default.
++
++endmenu
+diff --git a/sound/spi/Makefile b/sound/spi/Makefile
+new file mode 100644
+index 0000000..026fb73
+--- /dev/null
++++ b/sound/spi/Makefile
+@@ -0,0 +1,5 @@
++# Makefile for SPI drivers
++
++snd-at73c213-objs		:= at73c213.o
++
++obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
+diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
+new file mode 100644
+index 0000000..f514f47
+--- /dev/null
++++ b/sound/spi/at73c213.c
+@@ -0,0 +1,1121 @@
++/*
++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ *
++ * Copyright (C) 2006-2007 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/initval.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++
++#include <linux/atmel-ssc.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++
++#include "at73c213.h"
++
++#define BITRATE_MIN	 8000 /* Hardware limit? */
++#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
++#define BITRATE_MAX	50000 /* Hardware limit. */
++
++/* Initial (hardware reset) AT73C213 register values. */
++static u8 snd_at73c213_original_image[18] =
++{
++	0x00,	/* 00 - CTRL    */
++	0x05,	/* 01 - LLIG    */
++	0x05,	/* 02 - RLIG    */
++	0x08,	/* 03 - LPMG    */
++	0x08,	/* 04 - RPMG    */
++	0x00,	/* 05 - LLOG    */
++	0x00,	/* 06 - RLOG    */
++	0x22,	/* 07 - OLC     */
++	0x09,	/* 08 - MC      */
++	0x00,	/* 09 - CSFC    */
++	0x00,	/* 0A - MISC    */
++	0x00,	/* 0B -         */
++	0x00,	/* 0C - PRECH   */
++	0x05,	/* 0D - AUXG    */
++	0x00,	/* 0E -         */
++	0x00,	/* 0F -         */
++	0x00,	/* 10 - RST     */
++	0x00,	/* 11 - PA_CTRL */
++};
++
++struct snd_at73c213 {
++	struct snd_card			*card;
++	struct snd_pcm			*pcm;
++	struct snd_pcm_substream	*substream;
++	struct at73c213_board_info	*board;
++	int				irq;
++	int				period;
++	unsigned long			bitrate;
++	struct clk			*bitclk;
++	struct ssc_device		*ssc;
++	struct spi_device		*spi;
++	u8				spi_wbuffer[2];
++	u8				spi_rbuffer[2];
++	/* Image of the SPI registers in AT73C213. */
++	u8				reg_image[18];
++	/* Protect registers against concurrent access. */
++	spinlock_t			lock;
++};
++
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++	struct spi_message msg;
++	struct spi_transfer msg_xfer = {
++		.len		= 2,
++		.cs_change	= 0,
++	};
++	int retval;
++
++	spi_message_init(&msg);
++
++	chip->spi_wbuffer[0] = reg;
++	chip->spi_wbuffer[1] = val;
++
++	msg_xfer.tx_buf = chip->spi_wbuffer;
++	msg_xfer.rx_buf = chip->spi_rbuffer;
++	spi_message_add_tail(&msg_xfer, &msg);
++
++	retval = spi_sync(chip->spi, &msg);
++
++	if (!retval)
++		chip->reg_image[reg] = val;
++
++	return retval;
++}
++
++static struct snd_pcm_hardware snd_at73c213_playback_hw = {
++	.info		= SNDRV_PCM_INFO_INTERLEAVED |
++			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
++	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
++	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
++	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
++	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
++	.channels_min	= 2,
++	.channels_max	= 2,
++	.buffer_bytes_max = 64 * 1024 - 1,
++	.period_bytes_min = 512,
++	.period_bytes_max = 64 * 1024 - 1,
++	.periods_min	= 4,
++	.periods_max	= 1024,
++};
++
++/*
++ * Calculate and set bitrate and divisions.
++ */
++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++{
++	unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
++	unsigned long dac_rate_new, ssc_div, status;
++	unsigned long ssc_div_max, ssc_div_min;
++	int max_tries;
++
++	/*
++	 * We connect two clocks here, picking divisors so the I2S clocks
++	 * out data at the same rate the DAC clocks it in ... and as close
++	 * as practical to the desired target rate.
++	 *
++	 * The DAC master clock (MCLK) is programmable, and is either 256
++	 * or (not here) 384 times the I2S output clock (BCLK).
++	 */
++
++	/* SSC clock / (bitrate * stereo * 16-bit). */
++	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
++	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
++	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
++	max_tries = (ssc_div_max - ssc_div_min) / 2;
++
++	if (max_tries < 1)
++		max_tries = 1;
++
++	/* ssc_div must be a power of 2. */
++	ssc_div = (ssc_div + 1) & ~1UL;
++
++	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
++		ssc_div -= 2;
++		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
++			return -ENXIO;
++	}
++
++	/* Search for a possible bitrate. */
++	do {
++		/* SSC clock / (ssc divider * 16-bit * stereo). */
++		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
++			return -ENXIO;
++
++		/* 256 / (2 * 16) = 8 */
++		dac_rate_new = 8 * (ssc_rate / ssc_div);
++
++		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
++		if (status < 0)
++			return status;
++
++		/* Ignore difference smaller than 256 Hz. */
++		if ((status/256) == (dac_rate_new/256))
++			goto set_rate;
++
++		ssc_div += 2;
++	} while (--max_tries);
++
++	/* Not able to find a valid bitrate. */
++	return -ENXIO;
++
++set_rate:
++	status = clk_set_rate(chip->board->dac_clk, status);
++	if (status < 0)
++		return status;
++
++	/* Set divider in SSC device. */
++	ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
++
++	/* SSC clock / (ssc divider * 16-bit * stereo). */
++	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++
++	dev_info(&chip->spi->dev,
++			"at73c213: supported bitrate is %lu (%lu divider)\n",
++			chip->bitrate, ssc_div);
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	snd_at73c213_playback_hw.rate_min = chip->bitrate;
++	snd_at73c213_playback_hw.rate_max = chip->bitrate;
++	runtime->hw = snd_at73c213_playback_hw;
++	chip->substream = substream;
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	chip->substream = NULL;
++	return 0;
++}
++
++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
++				 struct snd_pcm_hw_params *hw_params)
++{
++	return snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++}
++
++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size;
++
++	block_size = frames_to_bytes(runtime, runtime->period_size);
++
++	chip->period = 0;
++
++	ssc_writel(chip->ssc->regs, PDC_TPR,
++			(long)runtime->dma_addr);
++	ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
++	ssc_writel(chip->ssc->regs, PDC_TNPR,
++			(long)runtime->dma_addr + block_size);
++	ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
++				   int cmd)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	int retval = 0;
++
++	spin_lock(&chip->lock);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
++		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
++		ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
++		break;
++	default:
++		dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
++		retval = -EINVAL;
++		break;
++	}
++
++	spin_unlock(&chip->lock);
++
++	return retval;
++}
++
++static snd_pcm_uframes_t
++snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
++		- (unsigned long)runtime->dma_addr;
++
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++	return pos;
++}
++
++static struct snd_pcm_ops at73c213_playback_ops = {
++	.open		= snd_at73c213_pcm_open,
++	.close		= snd_at73c213_pcm_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_at73c213_pcm_hw_params,
++	.hw_free	= snd_at73c213_pcm_hw_free,
++	.prepare	= snd_at73c213_pcm_prepare,
++	.trigger	= snd_at73c213_pcm_trigger,
++	.pointer	= snd_at73c213_pcm_pointer,
++};
++
++static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++{
++	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++	if (chip->pcm) {
++		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++		chip->pcm = NULL;
++	}
++}
++
++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++{
++	struct snd_pcm *pcm;
++	int retval;
++
++	retval = snd_pcm_new(chip->card, chip->card->shortname,
++			device, 1, 0, &pcm);
++	if (retval < 0)
++		goto out;
++
++	pcm->private_data = chip;
++	pcm->private_free = snd_at73c213_pcm_free;
++	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++	strcpy(pcm->name, "at73c213");
++	chip->pcm = pcm;
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
++			SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
++			64 * 1024, 64 * 1024);
++out:
++	return retval;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++	struct snd_at73c213 *chip = dev_id;
++	struct snd_pcm_runtime *runtime = chip->substream->runtime;
++	u32 status;
++	int offset;
++	int block_size;
++	int next_period;
++	int retval = IRQ_NONE;
++
++	spin_lock(&chip->lock);
++
++	block_size = frames_to_bytes(runtime, runtime->period_size);
++	status = ssc_readl(chip->ssc->regs, IMR);
++
++	if (status & SSC_BIT(IMR_ENDTX)) {
++		chip->period++;
++		if (chip->period == runtime->periods)
++			chip->period = 0;
++		next_period = chip->period + 1;
++		if (next_period == runtime->periods)
++			next_period = 0;
++
++		offset = block_size * next_period;
++
++		ssc_writel(chip->ssc->regs, PDC_TNPR,
++				(long)runtime->dma_addr + offset);
++		ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++		retval = IRQ_HANDLED;
++	}
++
++	ssc_readl(chip->ssc->regs, IMR);
++	spin_unlock(&chip->lock);
++
++	if (status & SSC_BIT(IMR_ENDTX))
++		snd_pcm_period_elapsed(chip->substream);
++
++	return retval;
++}
++
++/*
++ * Mixer functions.
++ */
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
++
++	if (invert)
++		ucontrol->value.integer.value[0] =
++			(mask - ucontrol->value.integer.value[0]);
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++	int change, retval;
++	unsigned short val;
++
++	val = (ucontrol->value.integer.value[0] & mask);
++	if (invert)
++		val = mask - val;
++	val <<= shift;
++
++	spin_lock_irq(&chip->lock);
++
++	val = (chip->reg_image[reg] & ~(mask << shift)) | val;
++	change = val != chip->reg_image[reg];
++	retval = snd_at73c213_write_reg(chip, reg, val);
++
++	spin_unlock_irq(&chip->lock);
++
++	if (retval)
++		return retval;
++
++	return change;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++
++	if (mask == 1)
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	else
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++
++	uinfo->count = 2;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = mask;
++
++	return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int left_reg = kcontrol->private_value & 0xff;
++	int right_reg = (kcontrol->private_value >> 8) & 0xff;
++	int shift_left = (kcontrol->private_value >> 16) & 0x07;
++	int shift_right = (kcontrol->private_value >> 19) & 0x07;
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++	int invert = (kcontrol->private_value >> 22) & 1;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] =
++		(chip->reg_image[left_reg] >> shift_left) & mask;
++	ucontrol->value.integer.value[1] =
++		(chip->reg_image[right_reg] >> shift_right) & mask;
++
++	if (invert) {
++		ucontrol->value.integer.value[0] =
++			(mask - ucontrol->value.integer.value[0]);
++		ucontrol->value.integer.value[1] =
++			(mask - ucontrol->value.integer.value[1]);
++	}
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int left_reg = kcontrol->private_value & 0xff;
++	int right_reg = (kcontrol->private_value >> 8) & 0xff;
++	int shift_left = (kcontrol->private_value >> 16) & 0x07;
++	int shift_right = (kcontrol->private_value >> 19) & 0x07;
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++	int invert = (kcontrol->private_value >> 22) & 1;
++	int change, retval;
++	unsigned short val1, val2;
++
++	val1 = ucontrol->value.integer.value[0] & mask;
++	val2 = ucontrol->value.integer.value[1] & mask;
++	if (invert) {
++		val1 = mask - val1;
++		val2 = mask - val2;
++	}
++	val1 <<= shift_left;
++	val2 <<= shift_right;
++
++	spin_lock_irq(&chip->lock);
++
++	val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
++	val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
++	change = val1 != chip->reg_image[left_reg]
++		|| val2 != chip->reg_image[right_reg];
++	retval = snd_at73c213_write_reg(chip, left_reg, val1);
++	if (retval) {
++		spin_unlock_irq(&chip->lock);
++		goto out;
++	}
++	retval = snd_at73c213_write_reg(chip, right_reg, val2);
++	if (retval) {
++		spin_unlock_irq(&chip->lock);
++		goto out;
++	}
++
++	spin_unlock_irq(&chip->lock);
++
++	return change;
++
++out:
++	return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = 1;
++
++	return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
++
++	if (invert)
++		ucontrol->value.integer.value[0] =
++			(0x01 - ucontrol->value.integer.value[0]);
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++	int change, retval;
++	unsigned short val;
++
++	if (ucontrol->value.integer.value[0])
++		val = mask;
++	else
++		val = 0;
++
++	if (invert)
++		val = mask - val;
++	val <<= shift;
++
++	spin_lock_irq(&chip->lock);
++
++	val |= (chip->reg_image[reg] & ~(mask << shift));
++	change = val != chip->reg_image[reg];
++
++	retval = snd_at73c213_write_reg(chip, reg, val);
++
++	spin_unlock_irq(&chip->lock);
++
++	if (retval)
++		return retval;
++
++	return change;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
++
++	return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++		struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 2;
++	/* When inverted will give values 0x10001 => 0. */
++	uinfo->value.integer.min = 14;
++	uinfo->value.integer.max = 31;
++
++	return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++		struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	/* When inverted will give values 0x10001 => 0. */
++	uinfo->value.integer.min = 14;
++	uinfo->value.integer.max = 31;
++
++	return 0;
++}
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert)	\
++{									\
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
++	.name = xname,							\
++	.index = xindex,						\
++	.info = snd_at73c213_mono_switch_info,				\
++	.get = snd_at73c213_mono_switch_get,				\
++	.put = snd_at73c213_mono_switch_put,				\
++	.private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
++}
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{									\
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
++	.name = xname,							\
++	.index = xindex,						\
++	.info = snd_at73c213_stereo_info,				\
++	.get = snd_at73c213_stereo_get,					\
++	.put = snd_at73c213_stereo_put,					\
++	.private_value = (left_reg | (right_reg << 8)			\
++			| (shift_left << 16) | (shift_right << 19)	\
++			| (mask << 24) | (invert << 22))		\
++}
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "PA Playback Volume",
++	.index	= 0,
++	.info	= snd_at73c213_pa_volume_info,
++	.get	= snd_at73c213_mono_get,
++	.put	= snd_at73c213_mono_put,
++	.private_value	= PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "Aux Capture Volume",
++	.index	= 0,
++	.info	= snd_at73c213_aux_capture_volume_info,
++	.get	= snd_at73c213_mono_get,
++	.put	= snd_at73c213_mono_put,
++	.private_value	= DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "Line Capture Volume",
++	.index	= 0,
++	.info	= snd_at73c213_line_capture_volume_info,
++	.get	= snd_at73c213_stereo_get,
++	.put	= snd_at73c213_stereo_put,
++	.private_value	= DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
++		| (0x1f << 24) | (1 << 22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++};
++
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++	struct snd_card *card;
++	int errval, idx;
++
++	if (chip == NULL || chip->pcm == NULL)
++		return -EINVAL;
++
++	card = chip->card;
++
++	strcpy(card->mixername, chip->pcm->name);
++
++	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++		errval = snd_ctl_add(card,
++				snd_ctl_new1(&snd_at73c213_controls[idx],
++					chip));
++		if (errval < 0)
++			goto cleanup;
++	}
++
++	return 0;
++
++cleanup:
++	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
++		struct snd_kcontrol *kctl;
++		kctl = snd_ctl_find_numid(card, idx);
++		if (kctl)
++			snd_ctl_remove(card, kctl);
++	}
++	return errval;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
++{
++	/*
++	 * Continuous clock output.
++	 * Starts on falling TF.
++	 * Delay 1 cycle (1 bit).
++	 * Periode is 16 bit (16 - 1).
++	 */
++	ssc_writel(chip->ssc->regs, TCMR,
++			SSC_BF(TCMR_CKO, 1)
++			| SSC_BF(TCMR_START, 4)
++			| SSC_BF(TCMR_STTDLY, 1)
++			| SSC_BF(TCMR_PERIOD, 16 - 1));
++	/*
++	 * Data length is 16 bit (16 - 1).
++	 * Transmit MSB first.
++	 * Transmit 2 words each transfer.
++	 * Frame sync length is 16 bit (16 - 1).
++	 * Frame starts on negative pulse.
++	 */
++	ssc_writel(chip->ssc->regs, TFMR,
++			SSC_BF(TFMR_DATLEN, 16 - 1)
++			| SSC_BIT(TFMR_MSBF)
++			| SSC_BF(TFMR_DATNB, 1)
++			| SSC_BF(TFMR_FSLEN, 16 - 1)
++			| SSC_BF(TFMR_FSOS, 1));
++
++	return 0;
++}
++
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++	int retval;
++	unsigned char dac_ctrl = 0;
++
++	retval = snd_at73c213_set_bitrate(chip);
++	if (retval)
++		goto out;
++
++	/* Enable DAC master clock. */
++	clk_enable(chip->board->dac_clk);
++
++	/* Initialize at73c213 on SPI bus. */
++	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
++	if (retval)
++		goto out_clk;
++	msleep(1);
++	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
++	if (retval)
++		goto out_clk;
++
++	/* Precharge everything. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL,
++			(1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
++	if (retval)
++		goto out_clk;
++
++	msleep(50);
++
++	/* Stop precharging PA. */
++	retval = snd_at73c213_write_reg(chip, PA_CTRL,
++			(1<<PA_CTRL_APALP) | 0x0f);
++	if (retval)
++		goto out_clk;
++
++	msleep(450);
++
++	/* Stop precharging DAC, turn on master power. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++	if (retval)
++		goto out_clk;
++
++	msleep(1);
++
++	/* Turn on DAC. */
++	dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
++		| (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
++
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
++	if (retval)
++		goto out_clk;
++
++	/* Mute sound. */
++	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++	if (retval)
++		goto out_clk;
++
++	/* Enable I2S device, i.e. clock output. */
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++	goto out;
++
++out_clk:
++	clk_disable(chip->board->dac_clk);
++out:
++	return retval;
++}
++
++static int snd_at73c213_dev_free(struct snd_device *device)
++{
++	struct snd_at73c213 *chip = device->device_data;
++
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	if (chip->irq >= 0) {
++		free_irq(chip->irq, chip);
++		chip->irq = -1;
++	}
++
++	return 0;
++}
++
++static int __devinit snd_at73c213_dev_init(struct snd_card *card,
++					 struct spi_device *spi)
++{
++	static struct snd_device_ops ops = {
++		.dev_free	= snd_at73c213_dev_free,
++	};
++	struct snd_at73c213 *chip = get_chip(card);
++	int irq, retval;
++
++	irq = chip->ssc->irq;
++	if (irq < 0)
++		return irq;
++
++	spin_lock_init(&chip->lock);
++	chip->card = card;
++	chip->irq = -1;
++
++	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++	if (retval) {
++		dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
++		goto out;
++	}
++	chip->irq = irq;
++
++	memcpy(&chip->reg_image, &snd_at73c213_original_image,
++			sizeof(snd_at73c213_original_image));
++
++	retval = snd_at73c213_ssc_init(chip);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_chip_init(chip);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_pcm_new(chip, 0);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_mixer(chip);
++	if (retval)
++		goto out_snd_dev;
++
++	snd_card_set_dev(card, &spi->dev);
++
++	goto out;
++
++out_snd_dev:
++	snd_device_free(card, chip);
++out_irq:
++	free_irq(chip->irq, chip);
++	chip->irq = -1;
++out:
++	return retval;
++}
++
++static int snd_at73c213_probe(struct spi_device *spi)
++{
++	struct snd_card			*card;
++	struct snd_at73c213		*chip;
++	struct at73c213_board_info	*board;
++	int				retval;
++	char				id[16];
++
++	board = spi->dev.platform_data;
++	if (!board) {
++		dev_dbg(&spi->dev, "no platform_data\n");
++		return -ENXIO;
++	}
++
++	if (!board->dac_clk) {
++		dev_dbg(&spi->dev, "no DAC clk\n");
++		return -ENXIO;
++	}
++
++	if (IS_ERR(board->dac_clk)) {
++		dev_dbg(&spi->dev, "no DAC clk\n");
++		return PTR_ERR(board->dac_clk);
++	}
++
++	retval = -ENOMEM;
++
++	/* Allocate "card" using some unused identifiers. */
++	snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
++	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
++	if (!card)
++		goto out;
++
++	chip = card->private_data;
++	chip->spi = spi;
++	chip->board = board;
++
++	chip->ssc = ssc_request(board->ssc_id);
++	if (IS_ERR(chip->ssc)) {
++		dev_dbg(&spi->dev, "could not get ssc%d device\n",
++				board->ssc_id);
++		retval = PTR_ERR(chip->ssc);
++		goto out_card;
++	}
++
++	retval = snd_at73c213_dev_init(card, spi);
++	if (retval)
++		goto out_ssc;
++
++	strcpy(card->driver, "at73c213");
++	strcpy(card->shortname, board->shortname);
++	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++
++	retval = snd_card_register(card);
++	if (retval)
++		goto out_ssc;
++
++	dev_set_drvdata(&spi->dev, card);
++
++	goto out;
++
++out_ssc:
++	ssc_free(chip->ssc);
++out_card:
++	snd_card_free(card);
++out:
++	return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct spi_device *spi)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++	int retval;
++
++	/* Stop playback. */
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++
++	/* Mute sound. */
++	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++	if (retval)
++		goto out;
++
++	/* Turn off PA. */
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
++	if (retval)
++		goto out;
++	msleep(10);
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
++	if (retval)
++		goto out;
++
++	/* Turn off external DAC. */
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
++	if (retval)
++		goto out;
++	msleep(2);
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
++	if (retval)
++		goto out;
++
++	/* Turn off master power. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
++	if (retval)
++		goto out;
++
++out:
++	/* Stop DAC master clock. */
++	clk_disable(chip->board->dac_clk);
++
++	ssc_free(chip->ssc);
++	snd_card_free(card);
++	dev_set_drvdata(&spi->dev, NULL);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	clk_disable(chip->board->dac_clk);
++
++	return 0;
++}
++
++static int snd_at73c213_resume(struct spi_device *spi)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++
++	clk_enable(chip->board->dac_clk);
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++	return 0;
++}
++#else
++#define snd_at73c213_suspend NULL
++#define snd_at73c213_resume NULL
++#endif
++
++static struct spi_driver at73c213_driver = {
++	.driver		= {
++		.name	= "at73c213",
++	},
++	.probe		= snd_at73c213_probe,
++	.suspend	= snd_at73c213_suspend,
++	.resume		= snd_at73c213_resume,
++	.remove		= __devexit_p(snd_at73c213_remove),
++};
++
++static int __init at73c213_init(void)
++{
++	return spi_register_driver(&at73c213_driver);
++}
++module_init(at73c213_init);
++
++static void __exit at73c213_exit(void)
++{
++	spi_unregister_driver(&at73c213_driver);
++}
++module_exit(at73c213_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
+new file mode 100644
+index 0000000..fd8b372
+--- /dev/null
++++ b/sound/spi/at73c213.h
+@@ -0,0 +1,119 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 - 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_H
++#define _SND_AT73C213_H
++
++/* DAC control register */
++#define DAC_CTRL		0x00
++#define DAC_CTRL_ONPADRV	7
++#define DAC_CTRL_ONAUXIN	6
++#define DAC_CTRL_ONDACR		5
++#define DAC_CTRL_ONDACL		4
++#define DAC_CTRL_ONLNOR		3
++#define DAC_CTRL_ONLNOL		2
++#define DAC_CTRL_ONLNIR		1
++#define DAC_CTRL_ONLNIL		0
++
++/* DAC left line in gain register */
++#define DAC_LLIG		0x01
++#define DAC_LLIG_LLIG		0
++
++/* DAC right line in gain register */
++#define DAC_RLIG		0x02
++#define DAC_RLIG_RLIG		0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG		0x03
++#define DAC_LMPG_LMPG		0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG		0x04
++#define DAC_RMPG_RMPG		0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG		0x05
++#define DAC_LLOG_LLOG		0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG		0x06
++#define DAC_RLOG_RLOG		0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC			0x07
++#define DAC_OLC_RSHORT		7
++#define DAC_OLC_ROLC		4
++#define DAC_OLC_LSHORT		3
++#define DAC_OLC_LOLC		0
++
++/* DAC Mixer Control Register */
++#define DAC_MC			0x08
++#define DAC_MC_INVR		5
++#define DAC_MC_INVL		4
++#define DAC_MC_RMSMIN2		3
++#define DAC_MC_RMSMIN1		2
++#define DAC_MC_LMSMIN2		1
++#define DAC_MC_LMSMIN1		0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC		0x09
++#define DAC_CSFC_OVRSEL		4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC		0x0A
++#define DAC_MISC_VCMCAPSEL	7
++#define DAC_MISC_DINTSEL	4
++#define DAC_MISC_DITHEN		3
++#define DAC_MISC_DEEMPEN	2
++#define DAC_MISC_NBITS		0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH		0x0C
++#define DAC_PRECH_PRCHGPDRV	7
++#define DAC_PRECH_PRCHGAUX1	6
++#define DAC_PRECH_PRCHGLNOR	5
++#define DAC_PRECH_PRCHGLNOL	4
++#define DAC_PRECH_PRCHGLNIR	3
++#define DAC_PRECH_PRCHGLNIL	2
++#define DAC_PRECH_PRCHG		1
++#define DAC_PRECH_ONMSTR	0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG		0x0D
++#define DAC_AUXG_AUXG		0
++
++/* DAC Reset Register */
++#define DAC_RST			0x10
++#define DAC_RST_RESMASK		2
++#define DAC_RST_RESFILZ		1
++#define DAC_RST_RSTZ		0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL			0x11
++#define PA_CTRL_APAON		6
++#define PA_CTRL_APAPRECH	5
++#define PA_CTRL_APALP		4
++#define PA_CTRL_APAGAIN		0
++
++#endif /* _SND_AT73C213_H */
diff --git a/toolchain/kernel-headers/linux-2.6.22.1-007-ipmisensors-20070314-1214.patch b/toolchain/kernel-headers/linux-2.6.22.1-007-ipmisensors-20070314-1214.patch
new file mode 100644
index 000000000..5fe74954f
--- /dev/null
+++ b/toolchain/kernel-headers/linux-2.6.22.1-007-ipmisensors-20070314-1214.patch
@@ -0,0 +1,1914 @@
+diff -rduNp linux-2.6.22.1.oorig2/drivers/char/ipmi/ipmi_msghandler.c linux-2.6.22.1/drivers/char/ipmi/ipmi_msghandler.c
+--- linux-2.6.22.1.oorig2/drivers/char/ipmi/ipmi_msghandler.c	2007-07-10 20:56:30.000000000 +0200
++++ linux-2.6.22.1/drivers/char/ipmi/ipmi_msghandler.c	2007-07-24 14:22:26.000000000 +0200
+@@ -1953,6 +1953,24 @@ static void remove_proc_entries(ipmi_smi
+ #endif /* CONFIG_PROC_FS */
+ }
+ 
++/*
++ * Retrieves the bmc_device struct for a given ipmi interface number (or NULL if none).
++ */
++struct device *ipmi_get_bmcdevice(int if_num)
++{
++	ipmi_smi_t intf;
++	mutex_lock(&ipmi_interfaces_mutex);
++	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
++		if (intf->intf_num == if_num){
++			mutex_unlock(&ipmi_interfaces_mutex);
++			return &intf->bmc->dev->dev;
++		}
++	}
++	mutex_unlock(&ipmi_interfaces_mutex);
++
++	return NULL;
++}
++
+ static int __find_bmc_guid(struct device *dev, void *data)
+ {
+ 	unsigned char *id = data;
+@@ -4196,3 +4214,4 @@ EXPORT_SYMBOL(ipmi_get_my_LUN);
+ EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
+ EXPORT_SYMBOL(ipmi_user_set_run_to_completion);
+ EXPORT_SYMBOL(ipmi_free_recv_msg);
++EXPORT_SYMBOL(ipmi_get_bmcdevice);
+diff -rduNp linux-2.6.22.1.oorig2/drivers/hwmon/Kconfig linux-2.6.22.1/drivers/hwmon/Kconfig
+--- linux-2.6.22.1.oorig2/drivers/hwmon/Kconfig	2007-07-10 20:56:30.000000000 +0200
++++ linux-2.6.22.1/drivers/hwmon/Kconfig	2007-07-24 14:22:26.000000000 +0200
+@@ -248,6 +248,16 @@ config SENSORS_CORETEMP
+ 	  sensor inside your CPU. Supported all are all known variants
+ 	  of Intel Core family.
+ 
++config SENSORS_IPMI
++	tristate "IPMI Hardware Monitoring Support"
++	depends on HWMON && IPMI_HANDLER && EXPERIMENTAL
++	help
++	  If you say yes here you get support for sensors monitored by
++	  an IPMI baseboard management controller (BMC).
++
++	  This driver can also be built as a module.  If so, the module
++	  will be called ipmisensors.
++
+ config SENSORS_IT87
+ 	tristate "ITE IT87xx and compatibles"
+ 	depends on I2C
+diff -rduNp linux-2.6.22.1.oorig2/drivers/hwmon/Makefile linux-2.6.22.1/drivers/hwmon/Makefile
+--- linux-2.6.22.1.oorig2/drivers/hwmon/Makefile	2007-07-10 20:56:30.000000000 +0200
++++ linux-2.6.22.1/drivers/hwmon/Makefile	2007-07-24 14:22:26.000000000 +0200
+@@ -32,6 +32,7 @@ obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
+ obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
+ obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
+ obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
++obj-$(CONFIG_SENSORS_IPMI)	+= ipmisensors.o
+ obj-$(CONFIG_SENSORS_IT87)	+= it87.o
+ obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
+ obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
+diff -rduNp linux-2.6.22.1.oorig2/drivers/hwmon/ipmisensors.c linux-2.6.22.1/drivers/hwmon/ipmisensors.c
+--- linux-2.6.22.1.oorig2/drivers/hwmon/ipmisensors.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22.1/drivers/hwmon/ipmisensors.c	2007-07-24 14:22:26.000000000 +0200
+@@ -0,0 +1,1552 @@
++/*
++ *  ipmisensors.c -	lm-sensors/hwmon interface to IPMI sensors. 
++ *
++ *  Copyright (C) 2004-2006 Yani Ioannou <yani.ioannou@gmail.com>
++ *
++ *  Adapted from bmcsensors (lm-sensors for linux 2.4) 
++ *  bmcsensors (C) Mark D. Studebaker <mdsxyz123@yahoo.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *  
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *  
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/param.h>
++#include <linux/hwmon.h>
++#include <linux/list.h>
++#include <linux/slab.h>
++#include <linux/device.h>
++#include <linux/hwmon.h>
++
++#include "ipmisensors.h"
++
++/****** Function Prototypes ******/
++static void ipmisensors_send_message(struct ipmisensors_bmc_data *bmc,
++				     long msgid, struct kernel_ipmi_msg *msg);
++static void ipmisensors_reserve_sdr(struct ipmisensors_bmc_data *bmc);
++static void ipmisensors_get_sdr(struct ipmisensors_bmc_data *bmc, u16 res_id,
++				u16 record, u8 offset);
++static void ipmisensors_set_sensor_threshold(struct ipmisensors_bmc_data *bmc,
++					     u8 number, int value,
++					     int lim_index);
++static void ipmisensors_get_reading(struct ipmisensors_bmc_data *bmc,
++				    struct sdrdata *sdr);
++static void ipmisensors_msg_handler(struct ipmi_recv_msg *msg,
++				    void *user_msg_data);
++static int ipmisensors_intf_registered(int ipmi_intf);
++static int ipmisensors_bmc_registered(struct device *bmc);
++static void ipmisensors_register_bmc(int ipmi_intf, struct ipmi_addr *address);
++static void ipmisensors_unregister_bmc(int ipmi_intf);
++static void ipmisensors_unregister_bmc_all(void);
++static void ipmisensors_new_smi(int if_num, struct device *dev);
++static void ipmisensors_smi_gone(int if_num);
++static void ipmisensors_update_bmc(struct work_struct *);
++static void ipmisensors_cleanup(void);
++
++/****** Static Vars ******/
++
++/* set when module is being removed */
++static int cleanup = 0;
++
++/* ipmisensors driver data */
++static struct ipmisensors_data driver_data = {
++	.driver_name = "bmc",
++	.bmc_data = LIST_HEAD_INIT(driver_data.bmc_data),
++	.interfaces = 0,
++	.smi_watcher = {
++			.owner = THIS_MODULE,
++			.new_smi = ipmisensors_new_smi,
++			.smi_gone = ipmisensors_smi_gone,
++			},
++	.ipmi_hndlrs = {
++			.ipmi_recv_hndl = ipmisensors_msg_handler,
++			},
++};
++
++/* sensor refresh workqueue */
++static struct workqueue_struct *ipmisensors_workqueue;
++
++/****** SDR List Functions ******/
++/**
++ * Creates a new sdrdata struct, or returns NULL if insufficient memory.
++ */
++static struct sdrdata *ipmisensors_new_sdr(void)
++{
++	struct sdrdata *sdr;
++
++	sdr = kmem_cache_alloc(driver_data.sdrdata_cache, GFP_ATOMIC);
++	if (sdr) {
++		memset(sdr, 0, sizeof(struct sdrdata));
++	} else {
++		printk(KERN_ERR
++		       "ipmisensors: Couldn't allocate memory for new SDR\n");
++	}
++
++	return sdr;
++}
++
++/**
++ * Adds the given sdrdata struct to the given bmc's SDR list.
++ *
++ * @bmc: the bmc to send the message to.
++ */
++static inline void ipmisensors_add_sdr(struct ipmisensors_bmc_data *bmc,
++				       struct sdrdata *sdr)
++{
++	list_add(&sdr->list, &bmc->sdrs);
++	printk(KERN_DEBUG
++	       "ipmisensors: SDR %d: type 0x%02x (%s)\n",
++	       bmc->sdr_count, sdr->stype, sdr->id);
++	bmc->sdr_count++;
++}
++
++/**
++ * Cleanup the sdr list for the given BMC.
++ * 
++ * @bmc: the bmc to send the message to.
++ */
++static void ipmisensors_sdr_cleanup(struct ipmisensors_bmc_data *bmc)
++{
++	struct sdrdata *cursor, *next;
++
++	/* find and free each sdr data struct */
++	list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) {
++		device_remove_file(bmc->dev, &cursor->attr.dev_attr);
++		device_remove_file(bmc->dev, &cursor->attr_min.dev_attr);
++		device_remove_file(bmc->dev, &cursor->attr_max.dev_attr);
++		device_remove_file(bmc->dev, &cursor->attr_label.dev_attr);
++
++		kfree(cursor->attr_name);
++		kfree(cursor->attr_max_name);
++		kfree(cursor->attr_min_name);
++		kfree(cursor->attr_label_name);
++
++		list_del(&cursor->list);
++		kmem_cache_free(driver_data.sdrdata_cache, cursor);
++	}
++}
++
++/* worker function for workqueue ipmisensors_workqueue */
++static void ipmisensors_update_bmc(struct work_struct *work)
++{
++	struct ipmisensors_bmc_data *bmc = container_of(work, struct ipmisensors_bmc_data, update_work.work);
++
++	/* don't start an update cycle if one already in progress */
++	if (bmc->state != STATE_READING) {
++		struct sdrdata *cursor, *next;
++		bmc->state = STATE_READING;
++		printk(KERN_DEBUG "ipmisensors: starting update\n");
++
++		/* init semaphore to 1 for update cycle */
++		sema_init(&bmc->update_semaphore, 1);
++
++		/* update each sdr reading */
++		list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) {
++			ipmisensors_get_reading(bmc, cursor);
++		}
++	}
++
++	/* wait for readings (need timeout?) */
++	down_interruptible(&bmc->update_semaphore);
++
++	printk(KERN_DEBUG "ipmisensors: update complete\n");
++
++	bmc->state = STATE_DONE;
++
++	/* if the module isn't cleaning up, schedule another update */
++	if (!cleanup)
++		queue_delayed_work(ipmisensors_workqueue, &bmc->update_work,
++				   bmc->update_period * HZ);
++}
++
++/****** IPMI Message Sending ******/
++
++/**
++ * Send a message to the IPMI BMC
++ *
++ * @bmc: the bmc to send the message to.
++ * @msgid: the message id to use.
++ * @msg: the ipmi message structure.
++ */
++static void ipmisensors_send_message(struct ipmisensors_bmc_data *bmc,
++				     long msgid, struct kernel_ipmi_msg *msg)
++{
++	if (msg->data == NULL)
++		printk(KERN_DEBUG "ipmisensors: Send 0x%x\n", msg->cmd);
++	else
++		printk(KERN_DEBUG "ipmisensors: Send 0x%x 0x%x 0x%x\n",
++		       msg->cmd, msg->data[0], msg->data[1]);
++
++	/* This should be ipmi_request, but Corey had to remove
++	 * that due to it being unused at the moment, as soon as 
++	 * this makes it into the kernel we should request it be re-instated.
++	 */
++	ipmi_request_settime(bmc->user, &bmc->address, msgid, msg, bmc, 0,
++			     -1, 0);
++}
++
++/**
++ * Compose and send a "reserve SDR" message
++ *
++ * @bmc: the bmc to send the message to.
++ */
++static void ipmisensors_reserve_sdr(struct ipmisensors_bmc_data *bmc)
++{
++	bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST;
++	bmc->tx_message.cmd = IPMI_RESERVE_SDR;
++	bmc->tx_message.data_len = 0;
++	bmc->tx_message.data = NULL;
++
++	ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++}
++
++/**
++ * Componse and send a "get SDR" message
++ *
++ * @bmc: the bmc to send the message to.
++ * @res_id:
++ * @record:
++ * @offset:
++ */
++static void ipmisensors_get_sdr(struct ipmisensors_bmc_data *bmc, u16 res_id,
++				u16 record, u8 offset)
++{
++	printk(KERN_DEBUG "ipmisensors: Get SDR 0x%x 0x%x 0x%x\n",
++	       res_id, record, offset);
++	bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST;
++	bmc->tx_message.cmd = IPMI_GET_SDR;
++	bmc->tx_message.data_len = 6;
++	bmc->tx_message.data = bmc->tx_msg_data;
++	bmc->tx_msg_data[0] = res_id & 0xff;
++	bmc->tx_msg_data[1] = res_id >> 8;
++	bmc->tx_msg_data[2] = record & 0xff;
++	bmc->tx_msg_data[3] = record >> 8;
++	bmc->tx_msg_data[4] = offset;
++	bmc->tx_msg_data[5] = bmc->ipmi_sdr_partial_size;
++
++	ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++}
++
++/**
++ * Compose and send a "set sensor threshold" message
++ *
++ * @bmc: the bmc to send the message to.
++ * @id: the ipmi id number of the sensor.
++ * @value: the new value for the threshold.
++ * @lim_index: the index in the lim[] array for which this value applies.
++ */
++static void ipmisensors_set_sensor_threshold(struct ipmisensors_bmc_data *bmc,
++					     u8 number, int value,
++					     int lim_index)
++{
++	int i;
++
++	printk(KERN_DEBUG "ipmisensors: Set SDR Threshold %d %d %d\n",
++	       number, value, lim_index);
++	bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST;
++	bmc->tx_message.cmd = IPMI_SET_SENSOR_THRESHOLD;
++	bmc->tx_message.data_len = 8;
++	bmc->tx_message.data = bmc->tx_msg_data;
++	bmc->tx_msg_data[0] = number & 0xff;
++	bmc->tx_msg_data[1] = 0x01 << lim_index;
++
++	if (lim_index > 5 || lim_index < 0) {
++		printk(KERN_INFO
++		       "ipmisensors: Error - ipmisensors_set_sensor_threshold given invalid lim_index\n");
++		return;
++	}
++
++	for (i = 2; i < 8; i++)
++		bmc->tx_msg_data[i] = 0x00;
++
++	bmc->tx_msg_data[lim_index] = value && 0xff;
++
++	ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++}
++
++/**
++ * Compose and send a "get sensor reading" message for the given sdr.
++ *
++ * @bmc: the bmc to send the message to.
++ * @sdr: the sdr of the sensor to get the reading for.
++ */
++static void ipmisensors_get_reading(struct ipmisensors_bmc_data *bmc,
++				    struct sdrdata *sdr)
++{
++	bmc->tx_message.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST;
++	bmc->tx_message.cmd = IPMI_GET_SENSOR_STATE_READING;
++	bmc->tx_message.data_len = 1;
++	bmc->tx_message.data = bmc->tx_msg_data;
++	bmc->tx_msg_data[0] = sdr->number;
++	bmc->current_sdr = sdr;
++
++	ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message);
++	down_interruptible(&bmc->update_semaphore);
++}
++
++/****** IPMI Message Receiving ******/
++
++/**
++ * Process an sensor reading response message.
++ *
++ * @bmc: the bmc the message is from
++ * @msg: the IPMI SDR response message
++ */
++static void ipmisensors_rcv_reading_msg(struct ipmisensors_bmc_data *bmc,
++					struct kernel_ipmi_msg *msg)
++{
++	struct sdrdata *sdr = bmc->current_sdr;
++
++	if (sdr == NULL) {
++		printk(KERN_ERR
++		       "ipmisensors: Error ipmisensors_rcv_reading with NULL sdr\n");
++		return;
++	}
++
++	sdr->reading = msg->data[1];
++	sdr->status = msg->data[2];
++	sdr->thresholds = msg->data[3];
++
++	printk(KERN_DEBUG "ipmisensors: sensor %d (type %d) reading %d\n",
++	       sdr->number, sdr->stype, msg->data[1]);
++
++	up(&bmc->update_semaphore);
++}
++
++/** 
++ * Unpack based on string type, convert to normal, null terminate.
++ */
++static void ipmisensors_sprintf(u8 * to, u8 * from, u8 type, u8 length)
++{
++	static const u8 *bcdplus = "0123456789 -.:,_";
++	int i;
++
++	switch (type) {
++	case 0:		/* unicode */
++		for (i = 0; i < length; i++)
++			*to++ = (*from++ & 0x7f);
++		*to = 0;
++		break;
++	case 1:		/* BCD Plus */
++		for (i = 0; i < length; i++)
++			*to++ = bcdplus[*from++ & 0x0f];
++		*to = 0;
++		break;
++	case 2:		/* packed ascii *//* if not a mult. of 3 this will run over */
++		for (i = 0; i < length; i += 3) {
++			*to++ = *from & 0x3f;
++			*to++ = *from >> 6 | ((*(from+1) & 0xf)  << 2);
++			from++;
++			*to++ = *from >> 4 | ((*(from+1) & 0x3)  << 4);
++			from++;
++			*to++ = (*from++ >> 2) & 0x3f;
++		}
++		*to = 0;
++		break;
++	case 3:		/* normal */
++		if (length > 1)
++			memcpy(to, from, length);
++		to[length] = 0;
++		break;
++	}
++}
++
++/* IPMI V1.5 Section 30 */
++static const int exps[] =
++    { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000 };
++
++/* Return 0 for fan, 2 for temp, 3 for voltage
++   We could make it variable based on the accuracy (= log10(m * 10**k2));
++   this would work for /proc output, however libsensors resolution
++   is statically set in lib/chips.c */
++static int decplaces(struct sdrdata *sd)
++{
++	switch (sd->stype) {
++	case STYPE_TEMP:
++		return 2;
++	case STYPE_CURR:
++	case STYPE_VOLT:
++		return 3;
++	case STYPE_FAN:
++	default:
++		return 0;
++	}
++}
++
++/* convert a raw value to a reading. IMPI V1.5 Section 30 */
++static long conv_val(int value, struct sdrdata *sd)
++{
++	u8 k1, k2;
++	long r;
++
++	r = value * sd->m;
++	k1 = sd->k & 0x0f;
++	k2 = sd->k >> 4;
++	if (k1 < 8)
++		r += sd->b * exps[k1];
++	else
++		r += sd->b / exps[16 - k1];
++	r *= exps[decplaces(sd)];
++	if (k2 < 8) {
++		if (sd->linear != 7)
++			r *= exps[k2];
++		else
++			/* this will always truncate to 0: r = 1 / (exps[k2] * r); */
++			r = 0;
++	} else {
++		if (sd->linear != 7)
++			r /= exps[16 - k2];
++		else {
++			if (r != 0)
++				/* 1 / x * 10 ** (-m) == 10 ** m / x */
++				r = exps[16 - k2] / r;
++			else
++				r = 0;
++		}
++	}
++
++	return r;
++}
++
++static const char *threshold_text[] = {
++	"upper non-recoverable threshold",
++	"upper critical threshold",
++	"upper non-critical threshold",
++	"lower non-recoverable threshold",
++	"lower critical threshold",
++	"lower non-critical threshold",
++	"positive-going hysteresis",
++	"negative-going hysteresis"	/* unused */
++};
++
++/* select two out of the 8 possible readable thresholds, and place indexes into the limits
++   array into lim1 and lim2. Set writable flags */
++static void ipmisensors_select_thresholds(struct sdrdata *sd)
++{
++	u8 capab = sd->capab;
++	u16 mask = sd->thresh_mask;
++	int tmp;
++
++	sd->lim1 = -1;
++	sd->lim2 = -1;
++	sd->lim1_write = 0;
++	sd->lim2_write = 0;
++
++	if (((capab & 0x0c) == 0x04) ||	/* readable thresholds ? */
++	    ((capab & 0x0c) == 0x08)) {
++		/* select upper threshold */
++		if (mask & 0x10) {	/* upper crit */
++			sd->lim1 = 1;
++			if ((capab & 0x0c) == 0x08 && (mask & 0x1000))
++				sd->lim1_write = 1;
++		} else if (mask & 0x20) {	/* upper non-recov */
++			sd->lim1 = 0;
++			if ((capab & 0x0c) == 0x08 && (mask & 0x2000))
++				sd->lim1_write = 1;
++		} else if (mask & 0x08) {	/* upper non-crit */
++			sd->lim1 = 2;
++			if ((capab & 0x0c) == 0x08 && (mask & 0x0800))
++				sd->lim1_write = 1;
++		}
++
++		/* select lower threshold */
++		if ((((capab & 0x30) == 0x10) ||	/* readable ? */
++		     ((capab & 0x30) == 0x20)) &&	/* pos hyst */
++		    sd->stype == STYPE_TEMP)
++			sd->lim2 = 6;
++		else if (mask & 0x02) {	/* lower crit */
++			sd->lim2 = 4;
++			if ((capab & 0x0c) == 0x08 && (mask & 0x0200))
++				sd->lim2_write = 1;
++		} else if (mask & 0x04) {	/* lower non-recov */
++			sd->lim2 = 3;
++			if ((capab & 0x0c) == 0x08 && (mask & 0x0400))
++				sd->lim2_write = 1;
++		} else if (mask & 0x01) {	/* lower non-crit */
++			sd->lim2 = 5;
++			if ((capab & 0x0c) == 0x08 && (mask & 0x0100))
++				sd->lim2_write = 1;
++		}
++	}
++
++	/* swap lim1/lim2 if m < 0 or function is 1/x (but not both!) */
++	if ((sd->m < 0 && sd->linear != 7) || (sd->m >= 0 && sd->linear == 7)) {
++		tmp = sd->lim1;
++		sd->lim1 = sd->lim2;
++		sd->lim2 = tmp;
++	}
++
++	if (sd->lim1 >= 0)
++		printk(KERN_INFO "ipmisensors: using %s for upper limit\n",
++		       threshold_text[sd->lim1]);
++	else
++		printk(KERN_DEBUG "ipmisensors: no readable upper limit\n");
++
++	if (sd->lim2 >= 0)
++		printk(KERN_INFO "ipmisensors: using %s for lower limit\n",
++		       threshold_text[sd->lim2]);
++	else
++		printk(KERN_DEBUG "ipmisensors: no readable lower limit\n");
++}
++
++/************* sysfs callback functions *********/
++static ssize_t show_update_period(struct device *dev,
++				     struct device_attribute *attr, char *buf)
++{
++	struct ipmisensors_bmc_device_attribute *aattr =
++	    to_ipmisensors_bmc_dev_attr(attr);
++
++	return snprintf(buf, 20, "%d\n", aattr->bmc->update_period);
++}
++
++static ssize_t store_update_period(struct device *dev,
++				      struct device_attribute *attr,
++				      const char *buf, size_t count)
++{
++	struct ipmisensors_bmc_device_attribute *aattr =
++	    to_ipmisensors_bmc_dev_attr(attr);
++
++	aattr->bmc->update_period = simple_strtoul(buf, NULL, 10);;
++	return count;
++};
++
++static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
++			   char *buf)
++{
++	struct ipmisensors_device_attribute *sattr =
++	    to_ipmisensors_dev_attr(attr);
++	return snprintf(buf, 20, "%ld\n",
++			conv_val(sattr->sdr->reading, sattr->sdr));
++}
++
++static ssize_t show_sensor_max(struct device *dev,
++			       struct device_attribute *attr, char *buf)
++{
++	long max = 0;
++	struct ipmisensors_device_attribute *sattr =
++	    to_ipmisensors_dev_attr(attr);
++
++	if (sattr->sdr->lim1 >= 0)
++		max = conv_val(sattr->sdr->limits[sattr->sdr->lim1],
++			       sattr->sdr);
++	return snprintf(buf, 20, "%ld\n", max);
++}
++
++static ssize_t show_sensor_min(struct device *dev,
++			       struct device_attribute *attr, char *buf)
++{
++	long min = 0;
++	struct ipmisensors_device_attribute *sattr =
++	    to_ipmisensors_dev_attr(attr);
++
++	if (sattr->sdr->lim2 >= 0)
++		min = conv_val(sattr->sdr->limits[sattr->sdr->lim2],
++			       sattr->sdr);
++	return snprintf(buf, 20, "%ld\n", min);
++};
++
++static ssize_t show_sensor_label(struct device *dev,
++				 struct device_attribute *attr, char *buf)
++{
++	u8 label[SDR_MAX_UNPACKED_ID_LENGTH];
++	struct ipmisensors_device_attribute *sattr =
++	    to_ipmisensors_dev_attr(attr);
++
++	ipmisensors_sprintf(label, sattr->sdr->id, sattr->sdr->string_type,
++			    sattr->sdr->id_length);
++	return snprintf(buf, 20, "%s\n", label);
++};
++
++static ssize_t store_sensor_max(struct device *dev,
++				struct device_attribute *attr, const char *buf,
++				size_t count)
++{
++	long val = simple_strtoul(buf, NULL, 10);
++	struct ipmisensors_device_attribute *sattr =
++	    to_ipmisensors_dev_attr(attr);
++	printk(KERN_DEBUG "ipmisensors: set max on sensor #%d to %ld",
++	       sattr->sdr->number, val);
++	ipmisensors_set_sensor_threshold(sattr->sdr->bmc, sattr->sdr->number,
++					 val, sattr->sdr->lim1);
++	return count;
++};
++
++static ssize_t store_sensor_min(struct device *dev,
++				struct device_attribute *attr, const char *buf,
++				size_t count)
++{
++	long val = simple_strtoul(buf, NULL, 10);
++	struct ipmisensors_device_attribute *sattr =
++	    to_ipmisensors_dev_attr(attr);
++	printk(KERN_DEBUG "ipmisensors: set min on sensor #%d to %ld",
++	       sattr->sdr->number, val);
++	ipmisensors_set_sensor_threshold(sattr->sdr->bmc, sattr->sdr->number,
++					 val, sattr->sdr->lim2);
++	return count;
++};
++
++static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
++			   char *buf)
++{
++	struct ipmisensors_bmc_device_attribute *aattr =
++	    to_ipmisensors_bmc_dev_attr(attr);
++	return snprintf(buf, 20, "%d\n", aattr->bmc->alarms);
++};
++
++static ssize_t show_name(struct device *dev, struct device_attribute *attr,
++			   char *buf)
++{
++	return snprintf(buf, 20, "%s\n", driver_data.driver_name);
++};
++
++/* work function to build the sysfs entries using the ipmi sdrs */
++static void ipmisensors_build_sysfs(struct work_struct *work)
++{
++	int temps = 0, volts = 0, currs = 0, fans = 0;
++	struct sdrdata *cursor, *next;
++	struct ipmisensors_bmc_data *bmc = container_of(work, struct ipmisensors_bmc_data, sysfs_work);
++
++	/* find and create entries for each sdr data struct */
++	list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) {
++		u8 id[SDR_MAX_UNPACKED_ID_LENGTH];
++
++		cursor->attr_name =
++		    (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++				    GFP_KERNEL);
++		cursor->attr_max_name =
++		    (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++				    GFP_KERNEL);
++		cursor->attr_min_name =
++		    (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++				    GFP_KERNEL);
++
++		if (cursor->id_length > 0) {
++			cursor->attr_label_name =
++			    (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH,
++					    GFP_KERNEL);
++
++			if (cursor->attr_label_name == NULL) {
++				printk(KERN_INFO
++				       "ipmisensors: Out of memory (kmalloc failed)");
++				kfree(cursor->attr_name);
++				kfree(cursor->attr_max_name);
++				kfree(cursor->attr_min_name);
++				return;
++			}
++		}
++
++		if (cursor->attr_name == NULL || cursor->attr_max_name == NULL
++		    || cursor->attr_min_name == NULL
++		    || cursor->attr_label_name == NULL) {
++			printk(KERN_INFO
++			       "ipmisensors: Out of memory (kmalloc failed)");
++			kfree(cursor->attr_name);
++			kfree(cursor->attr_max_name);
++			kfree(cursor->attr_min_name);
++			kfree(cursor->attr_label_name);
++			return;
++		}
++
++		switch (cursor->stype) {
++		case (STYPE_TEMP):
++			/* create the name of the sensor */
++			snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++				 "temp%d_input", ++temps);
++			/* create min, max attributes */
++			snprintf(cursor->attr_max_name, MAX_FILENAME_LENGTH,
++				 "temp%d_max", temps);
++			snprintf(cursor->attr_min_name, MAX_FILENAME_LENGTH,
++				 "temp%d_min", temps);
++			/* create the label of the sensor */
++			snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++				 "temp%d_label", temps);
++			break;
++		case (STYPE_VOLT):
++			/* create the name of the sensor */
++			snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++				 "in%d_input", ++volts);
++			/* create min, max attributes */
++			snprintf(cursor->attr_max_name, MAX_FILENAME_LENGTH,
++				 "in%d_max", volts);
++			snprintf(cursor->attr_min_name, MAX_FILENAME_LENGTH,
++				 "in%d_min", volts);
++			/* create the label of the sensor */
++			snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++				 "in%d_label", volts);
++			break;
++		case (STYPE_CURR):
++			/* create the name of the sensor */
++			snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++				 "curr%d_input", ++currs);
++			/* create min, max attributes */
++			sprintf(cursor->attr_max_name, "curr%d_max", currs);
++			sprintf(cursor->attr_min_name, "curr%d_min", currs);
++			/* create the label of the sensor */
++			snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++				 "curr%d_label", currs);
++			break;
++		case (STYPE_FAN):
++			/* create the name of the sensor */
++			snprintf(cursor->attr_name, MAX_FILENAME_LENGTH,
++				 "fan%d_input", ++fans);
++			/* create min, max attributes */
++			sprintf(cursor->attr_max_name, "fan%d_max", fans);
++			sprintf(cursor->attr_min_name, "fan%d_min", fans);
++			/* create the label of the sensor */
++			snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH,
++				 "fan%d_label", fans);
++			break;
++		default:
++			printk(KERN_INFO "ipmisensors: unkown sensor type\n");
++			continue;
++		}
++
++		cursor->attr.dev_attr.attr.name = cursor->attr_name;
++		cursor->attr.dev_attr.attr.mode = S_IRUGO;
++		cursor->attr.dev_attr.attr.owner = THIS_MODULE;
++		cursor->attr.dev_attr.show = show_sensor;
++		cursor->attr.dev_attr.store = NULL;
++		cursor->attr.sdr = cursor;
++
++		cursor->attr_min.dev_attr.attr.name = cursor->attr_min_name;
++		cursor->attr_min.dev_attr.attr.owner = THIS_MODULE;
++		cursor->attr_min.dev_attr.show = show_sensor_min;
++		cursor->attr_min.sdr = cursor;
++
++		if (cursor->lim2_write) {
++			printk(KERN_INFO
++			       "ipmisensors: You have a writable sensor threshold! Send me an e-mail at <yani.ioannou@gmail.com>.\n");
++			cursor->attr_min.dev_attr.store = store_sensor_min;
++			cursor->attr_min.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
++		} else {
++			cursor->attr_min.dev_attr.store = NULL;
++			cursor->attr_min.dev_attr.attr.mode = S_IRUGO;
++		}
++
++		cursor->attr_max.dev_attr.attr.name = cursor->attr_max_name;
++		cursor->attr_max.dev_attr.attr.owner = THIS_MODULE;
++		cursor->attr_max.dev_attr.show = show_sensor_max;
++		cursor->attr_max.sdr = cursor;
++
++		if (cursor->lim1_write) {
++			printk(KERN_INFO
++			       "ipmisensors: You have a writable sensor threshold! Send me an e-mail at <yani.ioannou@gmail.com>.\n");
++			cursor->attr_max.dev_attr.store = store_sensor_max;
++			cursor->attr_max.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
++		} else {
++			cursor->attr_max.dev_attr.store = NULL;
++			cursor->attr_max.dev_attr.attr.mode = S_IRUGO;
++		}
++
++		if (cursor->id_length > 0) {
++			cursor->attr_label.dev_attr.attr.name =
++			    cursor->attr_label_name;
++			cursor->attr_label.dev_attr.attr.mode = S_IRUGO;
++			cursor->attr_label.dev_attr.attr.owner = THIS_MODULE;
++			cursor->attr_label.dev_attr.show = show_sensor_label;
++			cursor->attr_label.dev_attr.store = NULL;
++			cursor->attr_label.sdr = cursor;
++		}
++
++		printk(KERN_INFO
++		       "ipmisensors: registering sensor %d: (type 0x%.2x) "
++		       "(fmt=%d; m=%d; b=%d; k1=%d; k2=%d; cap=0x%.2x; mask=0x%.4x)\n",
++		       cursor->number, cursor->stype, cursor->format, cursor->m,
++		       cursor->b, cursor->k & 0xf, cursor->k >> 4,
++		       cursor->capab, cursor->thresh_mask);
++
++		if (cursor->id_length > 0) {
++			ipmisensors_sprintf(id, cursor->id, cursor->string_type,
++					    cursor->id_length);
++			switch (cursor->stype) {
++			case (STYPE_TEMP):
++				printk(KERN_INFO
++				       "ipmisensors: sensors.conf: label temp%d \"%s\"\n",
++				       temps, id);
++				break;
++			case (STYPE_VOLT):
++				printk(KERN_INFO
++				       "ipmisensors: sensors.conf: label in%d \"%s\"\n",
++				       volts, id);
++				break;
++			case (STYPE_CURR):
++				printk(KERN_INFO
++				       "ipmisensors: sensors.conf: label curr%d \"%s\"\n",
++				       currs, id);
++				break;
++			case (STYPE_FAN):
++				printk(KERN_INFO
++				       "ipmisensors: sensors.conf: label fan%d \"%s\"\n",
++				       fans, id);
++				break;
++			}
++		}
++
++		ipmisensors_select_thresholds(cursor);
++
++		if (cursor->linear != 0 && cursor->linear != 7) {
++			printk(KERN_INFO
++			       "ipmisensors: sensor %d: nonlinear function 0x%.2x unsupported, expect bad results\n",
++			       cursor->number, cursor->linear);
++		}
++
++		if ((cursor->format & 0x03) == 0x02) {
++			printk(KERN_INFO
++			       "ipmisensors: sensor %d: 1's complement format unsupported, expect bad results\n",
++			       cursor->number);
++		} else if ((cursor->format & 0x03) == 0x03) {
++			printk(KERN_INFO
++			       "ipmisensors: sensor %d: threshold sensor only, no readings available",
++			       cursor->number);
++		}
++
++		if (cursor->lim1_write || cursor->lim2_write)
++			cursor->attr.dev_attr.attr.mode = 0644;
++		else
++			cursor->attr.dev_attr.attr.mode = 0444;
++
++		if (device_create_file(bmc->dev, &cursor->attr.dev_attr) < 0
++		    || device_create_file(bmc->dev,
++					  &cursor->attr_min.dev_attr) < 0
++		    || device_create_file(bmc->dev,
++					  &cursor->attr_max.dev_attr) < 0
++		    || (cursor->id_length >
++			0 ? device_create_file(bmc->dev,
++					       &cursor->attr_label.dev_attr) <
++			0 : 0)
++		    ) {
++			printk(KERN_INFO
++			       "ipmisensors: sysfs file creation failed for SDR %d (%s).\n",
++			       cursor->number, cursor->id);
++			kfree(cursor->attr_name);
++			kfree(cursor->attr_max_name);
++			kfree(cursor->attr_min_name);
++			kfree(cursor->attr_label_name);
++			return;
++		}
++	}
++
++	bmc->alarms_attr.dev_attr.attr.name = "alarms";
++	bmc->alarms_attr.dev_attr.attr.mode = S_IRUGO;
++	bmc->alarms_attr.dev_attr.attr.owner = THIS_MODULE;
++	bmc->alarms_attr.dev_attr.show = show_alarms;
++	bmc->alarms_attr.dev_attr.store = NULL;
++	bmc->alarms_attr.bmc = bmc;
++
++	if (device_create_file(bmc->dev, &bmc->alarms_attr.dev_attr) < 0) {
++		printk(KERN_INFO
++		       "ipmisensors: Failed to create sysfs entry 'alarms'");
++		return;
++	}
++
++	bmc->name_attr.attr.name = "name";
++	bmc->name_attr.attr.mode = S_IRUGO;
++	bmc->name_attr.attr.owner = THIS_MODULE;
++	bmc->name_attr.show = show_name;
++
++	if (device_create_file(bmc->dev, &bmc->name_attr) < 0) {
++		printk(KERN_INFO
++		       "ipmisensors: Failed to create sysfs entry 'name'");
++		return;
++	}
++
++	bmc->update_attr.dev_attr.attr.name = "update_period";
++	bmc->update_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
++	bmc->update_attr.dev_attr.attr.owner = THIS_MODULE;
++	bmc->update_attr.dev_attr.show = show_update_period;
++	bmc->update_attr.dev_attr.store = store_update_period;
++	bmc->update_attr.bmc = bmc;
++
++	if (device_create_file(bmc->dev, &bmc->update_attr.dev_attr) < 0) {
++		printk(KERN_INFO
++		       "ipmisensors: Failed to create sysfs entry 'update_period'");
++		return;
++	}
++
++	printk(KERN_INFO
++	       "ipmisensors: registered %d temp, %d volt, %d current, %d fan sensors\n",
++	       temps, volts, currs, fans);
++
++	/* This completes the initialization. We can now kickoff the 
++	 * periodic update of the bmc sensor's values by scheduling 
++	 * the first work.
++	 */
++	queue_work(ipmisensors_workqueue, &bmc->update_work.work);
++
++}
++
++/**
++ * Process an SDR response message, save the SDRs we like in the sdr
++ * list for the given BMC.
++ *
++ * @bmc: the bmc the message is from
++ * @msg: the IPMI SDR response message
++ */
++static void ipmisensors_rcv_sdr_msg(struct ipmisensors_bmc_data *bmc,
++				    struct kernel_ipmi_msg *msg)
++{
++	u16 record;
++	int type;
++	int stype;
++	int id_length;
++	int i;
++	int ipmi_ver = 0;
++	unsigned char *data;
++	u8 id[SDR_MAX_UNPACKED_ID_LENGTH];
++	struct sdrdata *sdr;
++
++	if (msg->data[0] != 0) {
++		/* cut request in half and try again */
++		bmc->ipmi_sdr_partial_size /= 2;
++		if (bmc->ipmi_sdr_partial_size < 8) {
++			printk(KERN_INFO
++			       "ipmisensors: IPMI buffers too small, giving up\n");
++			bmc->state = STATE_DONE;
++			return;
++		}
++		printk(KERN_DEBUG
++		       "ipmisensors: Reducing SDR request size to %d\n",
++		       bmc->ipmi_sdr_partial_size);
++
++		ipmisensors_get_sdr(bmc, 0, 0, 0);
++		bmc->state = STATE_SDR;
++		return;
++	}
++	if (bmc->ipmi_sdr_partial_size < IPMI_SDR_SIZE) {
++		if (bmc->rx_msg_data_offset == 0) {
++			memcpy(bmc->rx_msg_data, msg->data,
++			       bmc->ipmi_sdr_partial_size + 3);
++			bmc->rx_msg_data_offset =
++			    bmc->ipmi_sdr_partial_size + 3;
++		} else {
++			memcpy(bmc->rx_msg_data + bmc->rx_msg_data_offset,
++			       msg->data + 3, bmc->ipmi_sdr_partial_size);
++			bmc->rx_msg_data_offset += bmc->ipmi_sdr_partial_size;
++		}
++		if (bmc->rx_msg_data_offset > bmc->rx_msg_data[7] + 7) {
++			/* got last chunk */
++			bmc->rx_msg_data_offset = 0;
++			data = bmc->rx_msg_data;
++		} else {
++			/* get more */
++			record =
++			    (bmc->rx_msg_data[4] << 8) | bmc->rx_msg_data[3];
++			ipmisensors_get_sdr(bmc, bmc->resid, record,
++					    bmc->rx_msg_data_offset - 3);
++			bmc->state = STATE_SDR;
++			return;
++		}
++	} else {
++		/* got it in one chunk */
++		data = msg->data;
++	}
++
++	bmc->nextrecord = (data[2] << 8) | data[1];
++
++	/* If the ipmi version is 0.9 we have to remap some things. 
++	 * Yes this is very ugly, but we aren't the ones who 
++	 * implemented an incomplete spec! 
++	 */
++	ipmi_ver = data[5];
++
++	type = data[6];
++	/* known SDR type */
++	if (type == 1 || type == 2) {
++		stype = data[(ipmi_ver == 0x90 ? 16 : 15)];
++		/* known sensor type */
++		if (stype <= STYPE_MAX) {
++			if (data[(ipmi_ver == 0x90 ? 17 : 16)] != 0x01) {
++				if (type == 1)
++					ipmisensors_sprintf(id, &data[51],
++							    data[50] >> 6,
++							    data[50] & 0x1f);
++				else
++					ipmisensors_sprintf(id,
++							    &data[(ipmi_ver ==
++								   0x90 ? 30 :
++								   35)],
++							    data[(ipmi_ver ==
++								  0x90 ? 29 :
++								  34)] >> 6,
++							    data[(ipmi_ver ==
++								  0x90 ? 29 :
++								  34)] & 0x1f);
++				printk(KERN_INFO
++				       "ipmisensors: skipping non-threshold sensor \"%s\"\n",
++				       id);
++			} else {
++				/* add entry to sdrd table */
++				sdr = ipmisensors_new_sdr();
++				if (!sdr) {
++					printk(KERN_ERR
++					       "ipmisensors: could not allocate memory for new SDR");
++					return;
++				}
++				sdr->bmc = bmc;
++				sdr->stype = stype;
++				sdr->number = data[10];
++				sdr->capab = data[(ipmi_ver == 0x90 ? 15 : 14)];
++				sdr->thresh_mask =
++				    (((u16) data[(ipmi_ver == 0x90 ? 21 : 22)])
++				     << 8) | data[21];
++				if (type == 1) {
++					sdr->format =
++					    data[(ipmi_ver ==
++						  0x90 ? 22 : 24)] >> 6;
++					sdr->linear =
++					    data[(ipmi_ver ==
++						  0x90 ? 25 : 26)] & 0x7f;
++					sdr->m =
++					    data[(ipmi_ver == 0x90 ? 26 : 27)];
++					sdr->m |= ((u16)
++						   (data
++						    [(ipmi_ver ==
++						      0x90 ? 27 : 28)]
++						    & 0xc0)) << 2;
++					if (sdr->m & 0x0200) {
++						/* sign extend */
++						sdr->m |= 0xfc00;
++					}
++					sdr->b =
++					    data[(ipmi_ver == 0x90 ? 28 : 29)];
++					sdr->b |= ((u16)
++						   (data
++						    [(ipmi_ver ==
++						      0x90 ? 29 : 30)]
++						    & 0xc0)) << 2;
++					if (sdr->b & 0x0200) {
++						/* sign extend */
++						sdr->b |= 0xfc00;
++					}
++					sdr->k =
++					    data[(ipmi_ver == 0x90 ? 31 : 32)];
++					sdr->nominal =
++					    data[(ipmi_ver == 0x90 ? 33 : 34)];
++					for (i = 0; i < SDR_LIMITS; i++) {
++						/* assume readable */
++						sdr->limits[i] =
++						    data[(ipmi_ver ==
++							  0x90 ? 40 : 39) + i];
++					}
++					sdr->string_type = data[50] >> 6;
++					id_length = data[50] & 0x1f;
++					memcpy(sdr->id, &data[51], id_length);
++					sdr->id_length = id_length;
++				} else {
++					sdr->m = 1;
++					sdr->b = 0;
++					sdr->k = 0;
++					sdr->string_type =
++					    data[(ipmi_ver ==
++						  0x90 ? 29 : 34)] >> 6;
++					id_length = data[34] & 0x1f;
++					if (id_length > 0) {
++						memcpy(sdr->id,
++						       &data[(ipmi_ver ==
++							      0x90 ? 30 : 35)],
++						       id_length);
++					}
++					sdr->id_length = id_length;
++					/* limits?? */
++					if (ipmi_ver == 0x90) {
++						memcpy(sdr->id,
++						       &data[30], id_length);
++						sdr->id_length = id_length;
++					}
++				}
++				ipmisensors_add_sdr(bmc, sdr);
++			}
++		}
++		/* peek at the other SDR types */
++	} else if (type == 0x10 || type == 0x11 || type == 0x12) {
++		ipmisensors_sprintf(id, data + 19, data[18] >> 6,
++				    data[18] & 0x1f);
++		if (type == 0x10) {
++			printk(KERN_INFO
++			       "ipmisensors: Generic Device acc=0x%x; slv=0x%x; lun=0x%x; type=0x%x; \"%s\"\n",
++			       data[8], data[9], data[10], data[13], id);
++		} else if (type == 0x11) {
++			printk(KERN_INFO
++			       "ipmisensors: FRU Device acc=0x%x; slv=0x%x; log=0x%x; ch=0x%x; type=0x%x; \"%s\"\n",
++			       data[8], data[9], data[10], data[11], data[13],
++			       id);
++		} else {
++			printk(KERN_INFO
++			       "ipmisensors: Mgmt Ctllr Device slv=0x%x; \"%s\"\n",
++			       data[8], id);
++		}
++	} else if (type == 0x14) {
++		printk(KERN_INFO
++		       "ipmisensors: Message Channel Info Records:\n");
++		for (i = 0; i < 8; i++) {
++			printk(KERN_INFO "ipmisensors: Channel %d info 0x%x\n",
++			       i, data[9 + i]);
++		}
++	} else {
++		printk(KERN_INFO "ipmisensors: Skipping SDR type 0x%x\n", type);
++	}
++	if (ipmi_ver != 0x90) {
++		if (bmc->nextrecord >= 6224) {
++			/*YJ stop sensor scan on poweredge 1750 */
++			bmc->nextrecord = 0xffff;
++		}
++	}
++
++	if (bmc->nextrecord == 0xFFFF) {
++		if (bmc->sdr_count == 0) {
++			printk(KERN_INFO
++			       "ipmisensors: No recognized sensors found.\n");
++			bmc->state = STATE_DONE;
++		} else {
++			printk(KERN_INFO "ipmisensors: all sensors detected\n");
++			bmc->state = STATE_SYSTABLE;
++
++			/* Schedule sysfs build/registration work */
++			INIT_WORK(&bmc->sysfs_work, ipmisensors_build_sysfs);
++			queue_work(ipmisensors_workqueue, &bmc->sysfs_work);
++		}
++	} else {
++		ipmisensors_get_sdr(bmc, 0, bmc->nextrecord, 0);
++		bmc->state = STATE_SDR;
++	}
++}
++
++/**
++ * Process incoming messages based on internal state
++ *
++ * @bmc: the bmc the message is from.
++ * @msg: the ipmi message to process.
++ */
++static void ipmisensors_rcv_msg(struct ipmisensors_bmc_data *bmc,
++				struct kernel_ipmi_msg *msg)
++{
++	switch (bmc->state) {
++	case STATE_INIT:
++	case STATE_RESERVE:
++		bmc->resid = (((u16) msg->data[2]) << 8) | msg->data[1];
++
++		printk(KERN_DEBUG "ipmisensors: Got first resid 0x%.4x\n",
++		       bmc->resid);
++
++		ipmisensors_get_sdr(bmc, 0, 0, 0);
++		bmc->state = STATE_SDR;
++		break;
++
++	case STATE_SDR:
++	case STATE_SDRPARTIAL:
++		ipmisensors_rcv_sdr_msg(bmc, msg);
++		break;
++
++	case STATE_READING:
++		ipmisensors_rcv_reading_msg(bmc, msg);
++		break;
++
++	case STATE_UNCANCEL:
++		bmc->resid = (((u16) msg->data[2]) << 8) | msg->data[1];
++
++		printk(KERN_DEBUG "ipmisensors: Got new resid 0x%.4x\n",
++		       bmc->resid);
++
++		bmc->rx_msg_data_offset = 0;
++		ipmisensors_get_sdr(bmc, 0, bmc->nextrecord, 0);
++		bmc->state = STATE_SDR;
++		break;
++
++	case STATE_DONE:
++	case STATE_SYSTABLE:
++		break;
++	default:
++		bmc->state = STATE_INIT;
++	}
++}
++
++/**
++ * Callback to handle a received IPMI message from a given BMC.
++ *
++ * @msg: the received message.
++ * @handler_data: a pointer to the particular bmc ipmisensors_bmc_data struct.
++ */
++static void ipmisensors_msg_handler(struct ipmi_recv_msg *msg,
++				    void *user_msg_data)
++{
++	struct ipmisensors_bmc_data *bmc =
++	    (struct ipmisensors_bmc_data *)user_msg_data;
++
++	if (msg->msg.data[0] != 0)
++		printk(KERN_WARNING
++		       "ipmisensors: Error 0x%x on cmd 0x%x/0x%x\n",
++		       msg->msg.data[0], msg->msg.netfn, msg->msg.cmd);
++
++	if (bmc != NULL && ipmisensors_intf_registered(bmc->interface_id)) {
++		if (bmc->state == STATE_SDR &&
++		    msg->msg.data[0] == IPMI_INVALID_RESERVATION_ID) {
++			/* reservation cancelled, get new resid */
++			if (++bmc->errorcount > 275) {
++				printk(KERN_ERR
++				       "ipmisensors: Too many reservations cancelled, giving up\n");
++				bmc->state = STATE_DONE;
++			} else {
++				printk(KERN_DEBUG
++				       "ipmisensors: resid 0x%04x cancelled, getting new one\n",
++				       bmc->resid);
++
++				ipmisensors_reserve_sdr(bmc);
++				bmc->state = STATE_UNCANCEL;
++			}
++		} else if (msg->msg.data[0] != IPMI_CC_NO_ERROR &&
++			   msg->msg.data[0] != IPMI_ERR_RETURNING_REQ_BYTES &&
++			   msg->msg.data[0] != IPMI_ERR_PROVIDING_RESPONSE) {
++			printk(KERN_ERR
++			       "ipmisensors: Error 0x%x on cmd 0x%x/0x%x; state = %d; probably fatal.\n",
++			       msg->msg.data[0], msg->msg.netfn & 0xfe,
++			       msg->msg.cmd, bmc->state);
++		} else {
++			printk(KERN_DEBUG "ipmisensors: received message\n");
++			ipmisensors_rcv_msg(bmc, &msg->msg);
++		}
++
++	} else {
++		printk(KERN_WARNING
++		       "ipmisensors: Response for non-registered BMC\n");
++		if (bmc != NULL)
++			printk(KERN_DEBUG "ipmisensors: BMC ID: %d\n",
++			       bmc->interface_id);
++		else
++			printk(KERN_DEBUG "ipmisensors: BMC NULL!\n");
++	}
++
++	ipmi_free_recv_msg(msg);
++}
++
++/****** IPMI Interface Initialization ******/
++
++/**
++ * Return true if the given ipmi interface has been registered.
++ * 
++ * @ipmi_intf: The IPMI interface number.
++ */
++static int ipmisensors_intf_registered(int ipmi_intf)
++{
++	int found = 0;
++	struct ipmisensors_bmc_data *cursor, *next;
++
++	/* find and free the ipmisensors_bmc_data struct */
++	list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++		if (cursor->interface_id == ipmi_intf) {
++			found++;
++		}
++	}
++
++	return found;
++}
++
++/**
++ * Return true if the given BMC has been registered.
++ * 
++ * @bmc: The BMC device.
++ */
++static int ipmisensors_bmc_registered(struct device *bmc)
++{
++	int found = 0;
++	struct ipmisensors_bmc_data *cursor, *next;
++
++	/* find and free the ipmisensors_bmc_data struct */
++	list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++		if (cursor->dev == bmc) {
++			found++;
++		}
++	}
++
++	return found;
++}
++
++/**
++ * Register new IPMI BMC interface. Interface indpendent callback created
++ * for flexibility in adding new types of interface callbacks in future.
++ * 
++ * @ipmi_intf: The IPMI interface number.
++ */
++static void ipmisensors_register_bmc(int ipmi_intf, struct ipmi_addr *address)
++{
++	int error;
++
++	/* allocate a new ipmisensors_bmc_data struct */
++
++	struct ipmisensors_bmc_data *bmc = (struct ipmisensors_bmc_data *)
++	    kmalloc(sizeof(struct ipmisensors_bmc_data), GFP_KERNEL);
++
++	/* initialize members */
++	INIT_LIST_HEAD(&bmc->sdrs);
++	bmc->interface_id = ipmi_intf;
++
++	bmc->address = *address;
++
++	bmc->sdr_count = 0;
++	bmc->msgid = 0;
++	bmc->ipmi_sdr_partial_size = IPMI_CHUNK_SIZE;
++	bmc->state = STATE_INIT;
++	bmc->errorcount = 0;
++	bmc->rx_msg_data_offset = 0;
++	bmc->dev = ipmi_get_bmcdevice(ipmi_intf);
++
++	/* default to 3 second min update interval */
++	bmc->update_period = 3;
++
++	if (bmc->dev == NULL) {
++		printk(KERN_ERR
++		       "ipmisensors: Error, couldn't get BMC device for interface %d\n",
++		       bmc->interface_id);
++		kfree(bmc);
++		return;
++	}
++
++	/* Create IPMI messaging interface user */
++	error = ipmi_create_user(bmc->interface_id, &driver_data.ipmi_hndlrs, 
++				bmc, &bmc->user);
++	if (error < 0) {
++		printk(KERN_ERR
++		       "ipmisensors: Error, unable to register user with ipmi interface %d\n",
++		       bmc->interface_id);
++		kfree(bmc);
++		return;
++	}
++
++	/* Register the BMC as a HWMON class device */
++	bmc->class_dev = hwmon_device_register(bmc->dev);
++
++	if (IS_ERR(bmc->class_dev)) {
++		printk(KERN_ERR
++		       "ipmisensors: Error, unable to register hwmon class device for interface %d\n",
++		       bmc->interface_id);
++		kfree(bmc);
++		return;
++	}
++
++	/* Register the BMC in the driver */
++	if (ipmisensors_bmc_registered(bmc->dev)) {
++		printk(KERN_ERR
++		       "ipmisensors: BMC on interface %d already registered\n",
++		       bmc->interface_id);
++		hwmon_device_unregister(bmc->class_dev);
++		kfree(bmc);
++		return;
++	}
++
++	ipmi_get_version(bmc->user, &bmc->ipmi_version_major,
++			 &bmc->ipmi_version_minor);
++
++	/* finally add the new bmc data to the bmc data list */
++	list_add_tail(&bmc->list, &driver_data.bmc_data);
++	driver_data.interfaces++;
++
++	printk(KERN_INFO
++	       "ipmisensors: Registered IPMI %d.%d BMC over interface %d\n",
++	       bmc->ipmi_version_major,
++	       bmc->ipmi_version_minor, bmc->interface_id);
++
++	/* Send a reserve SDR command to the bmc */
++	ipmisensors_reserve_sdr(bmc);
++
++	/* initialize the bmc's update work struct */
++	INIT_DELAYED_WORK(&bmc->update_work, ipmisensors_update_bmc);
++}
++
++/**
++ * Callback for when an IPMI BMC is gone. Interface indpendent callback created
++ * for flexibility in adding new types of interface callbacks in future.
++ * 
++ * @ipmi_intf: The IPMI interface number.
++ */
++static void ipmisensors_unregister_bmc(int ipmi_intf)
++{
++	struct ipmisensors_bmc_data *cursor, *next;
++
++	/* find and free the ipmisensors_bmc_data struct */
++	list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++		if (cursor->interface_id == ipmi_intf) {
++			list_del(&cursor->list);
++			printk(KERN_DEBUG
++			       "ipmisensors: cancelling queued work\n");
++			/* cancel update work queued for this bmc */
++			cancel_delayed_work(&cursor->update_work);
++			printk(KERN_DEBUG
++			       "ipmisensors: waiting for update to finish\n");
++			/* wait for readings to finish */
++			while (cursor->state != STATE_DONE) ;
++
++			device_remove_file(cursor->dev,
++					   &cursor->alarms_attr.dev_attr);
++			device_remove_file(cursor->dev,
++					   &cursor->update_attr.dev_attr);
++			hwmon_device_unregister(cursor->class_dev);
++			ipmisensors_sdr_cleanup(cursor);
++			ipmi_destroy_user(cursor->user);
++
++			printk(KERN_INFO
++			       "ipmisensors: Unegistered IPMI interface %d\n",
++			       cursor->interface_id);
++
++			kfree(cursor);
++			driver_data.interfaces--;
++		}
++	}
++
++}
++
++/**
++ * Unregister all registered bmcs.
++ */
++static void ipmisensors_unregister_bmc_all(void)
++{
++	struct ipmisensors_bmc_data *cursor, *next;
++
++	/* find and free the ipmisensors_bmc_data struct */
++	list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) {
++		list_del(&cursor->list);
++
++		/* cancel update work queued for this bmc */
++		printk(KERN_DEBUG "ipmisensors: cancelling queued work\n");
++		cancel_delayed_work(&cursor->update_work);
++
++		printk(KERN_DEBUG
++		       "ipmisensors: waiting for update to finish\n");
++		/* wait for readings to finish */
++		while (cursor->state != STATE_DONE) ;
++
++		device_remove_file(cursor->dev, &cursor->alarms_attr.dev_attr);
++		device_remove_file(cursor->dev, &cursor->update_attr.dev_attr);
++		hwmon_device_unregister(cursor->class_dev);
++		ipmisensors_sdr_cleanup(cursor);
++		ipmi_destroy_user(cursor->user);
++
++		printk(KERN_INFO
++		       "ipmisensors: Unegistered IPMI interface %d\n",
++		       cursor->interface_id);
++
++		kfree(cursor);
++	}
++
++	driver_data.interfaces = 0;
++}
++
++/**
++ * Callback for when a new IPMI SMI type interface is found.
++ *
++ * @if_num: The IPMI interface number.
++ */
++static void ipmisensors_new_smi(int if_num, struct device *dev)
++{
++	struct ipmi_addr smi_address = {
++		IPMI_SYSTEM_INTERFACE_ADDR_TYPE,
++		IPMI_BMC_CHANNEL,
++		{0},
++	};
++
++	/* calls the generic new interface function */
++	ipmisensors_register_bmc(if_num, &smi_address);
++}
++
++/**
++ * Callback for when an exisiting IPMI SMI type interface is gone.
++ *
++ * @if_num: The IPMI interface number.
++ */
++static void ipmisensors_smi_gone(int if_num)
++{
++	if (driver_data.interfaces > 0) {
++		ipmisensors_unregister_bmc(if_num);
++	}
++}
++
++/**
++ * Initialize the module.
++ */
++static int __init ipmisensors_init(void)
++{
++	int error;
++	printk(KERN_INFO "ipmisensors - IPMI BMC sensors interface\n");
++
++	/* init cache managers */
++	driver_data.sdrdata_cache =
++	    kmem_cache_create("ipmisensors_sdrdata", sizeof(struct sdrdata), 0,
++			      0, NULL, NULL);
++	driver_data.sysfsattr_cache =
++	    kmem_cache_create("ipmisensors_sysfsattr",
++			      sizeof(struct ipmisensors_device_attribute), 0, 0,
++			      NULL, NULL);
++
++	if (!driver_data.sdrdata_cache || !driver_data.sysfsattr_cache) {
++		if (driver_data.sdrdata_cache)
++			kmem_cache_destroy(driver_data.sdrdata_cache);
++		if (driver_data.sysfsattr_cache)
++			kmem_cache_destroy(driver_data.sysfsattr_cache);
++		return -ENOMEM;
++	}
++
++	/* register IPMI interface callback(s) */
++	error = ipmi_smi_watcher_register(&driver_data.smi_watcher);
++	if (error) {
++		printk(KERN_WARNING
++		       "ipmisensors: can't register smi watcher\n");
++		return error;
++	}
++
++	/* create work queue, keep it simple, single-threaded */
++	ipmisensors_workqueue =
++	    create_singlethread_workqueue("ipmisensors_workqueue");
++
++	return 0;
++}
++
++/**
++ * Cleanup
++ */
++static void ipmisensors_cleanup(void)
++{
++	/* start cleanup */
++	cleanup = 1;
++
++	/* unregister bmcs */
++	printk(KERN_DEBUG "ipmisensors: unregister bmcs\n");
++	ipmi_smi_watcher_unregister(&driver_data.smi_watcher);
++	ipmisensors_unregister_bmc_all();
++
++	/* flush & destroy work queue */
++	printk(KERN_DEBUG "ipmisensors: destroy workqueue\n");
++	flush_workqueue(ipmisensors_workqueue);
++	destroy_workqueue(ipmisensors_workqueue);
++
++	/* remove cache managers */
++	if (driver_data.sdrdata_cache)
++		kmem_cache_destroy(driver_data.sdrdata_cache);
++	if (driver_data.sysfsattr_cache)
++		kmem_cache_destroy(driver_data.sysfsattr_cache);
++}
++
++/**
++ * Cleanup and exit the module
++ */
++static void __exit ipmisensors_exit(void)
++{
++	ipmisensors_cleanup();
++	printk(KERN_DEBUG "ipmisensors: cleanup finished\n");
++}
++
++MODULE_AUTHOR("Yani Ioannou <yani.ioannou@gmail.com>");
++MODULE_DESCRIPTION("IPMI BMC sensors");
++MODULE_LICENSE("GPL");
++
++module_init(ipmisensors_init);
++module_exit(ipmisensors_exit);
+diff -rduNp linux-2.6.22.1.oorig2/drivers/hwmon/ipmisensors.h linux-2.6.22.1/drivers/hwmon/ipmisensors.h
+--- linux-2.6.22.1.oorig2/drivers/hwmon/ipmisensors.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22.1/drivers/hwmon/ipmisensors.h	2007-07-24 14:22:26.000000000 +0200
+@@ -0,0 +1,240 @@
++/*
++ *  ipmisensors.h -	lm_sensors interface to IPMI sensors. 
++ *
++ *  Copyright (C) 2004-2006 Yani Ioannou <yani.ioannou@gmail.com>
++ *
++ *  Adapted from bmcsensors (lm-sensors for linux 2.4) 
++ *  bmcsensors (C) Mark D. Studebaker <mdsxyz123@yahoo.com>
++ *  
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *  
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *  
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/ipmi.h>
++#include <linux/list.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++/* SDR defs */
++#define STYPE_TEMP			0x01
++#define STYPE_VOLT			0x02
++#define STYPE_CURR			0x03
++#define STYPE_FAN			0x04
++
++#define SDR_LIMITS 			8
++#define SDR_MAX_ID_LENGTH 		16
++#define SDR_MAX_UNPACKED_ID_LENGTH 	((SDR_MAX_ID_LENGTH * 4 / 3) + 2)
++
++/* the last sensor type we are interested in */
++#define STYPE_MAX			4
++
++#define IPMI_SDR_SIZE			67
++#define IPMI_CHUNK_SIZE 		16
++
++#define MAX_FILENAME_LENGTH		30
++
++struct ipmisensors_device_attribute {
++	struct device_attribute dev_attr;
++	struct sdrdata *sdr;
++};
++#define to_ipmisensors_dev_attr(_dev_attr) \
++	container_of(_dev_attr, struct ipmisensors_device_attribute, dev_attr)
++
++#define IPMISENSORS_DEVICE_ATTR(_name,_mode,_show,_store,_index)	\
++struct ipmisensors_attribute sensor_dev_attr_##_name = {	\
++	.dev_attr =	__ATTR(_name,_mode,_show,_store),	\
++	.index =	_index,					\
++}
++
++struct ipmisensors_bmc_device_attribute {
++	struct device_attribute dev_attr;
++	struct ipmisensors_bmc_data *bmc;
++};
++#define to_ipmisensors_bmc_dev_attr(_dev_attr) \
++	container_of(_dev_attr, struct ipmisensors_bmc_device_attribute, dev_attr)
++
++/**
++ * &struct_sdrdata stores the IPMI Sensor Data Record (SDR) data, as recieved from the BMC, along with the corresponding sysfs attributes
++ */
++struct sdrdata {
++	struct list_head list;
++	/* retrieved from SDR, not expected to change */
++	/* Sensor Type Code */
++	u8 stype;
++	u8 number;
++	/* Sensor Capability Code */
++	u8 capab;
++	u16 thresh_mask;
++	u8 format;
++	u8 linear;
++	s16 m;
++	s16 b;
++	u8 k;
++	u8 nominal;
++	u8 limits[SDR_LIMITS];
++	/* index into limits for reported upper and lower limit */
++	int lim1, lim2;
++	u8 lim1_write, lim2_write;
++	u8 string_type;
++	u8 id_length;
++	u8 id[SDR_MAX_ID_LENGTH];
++	/* retrieved from reading */
++	u8 reading;
++	u8 status;
++	u8 thresholds;
++	/* sensor's bmc */
++	struct ipmisensors_bmc_data *bmc;
++	/* sysfs entries */
++	struct ipmisensors_device_attribute attr;
++	char *attr_name;
++	struct ipmisensors_device_attribute attr_min;
++	char *attr_min_name;
++	struct ipmisensors_device_attribute attr_max;
++	char *attr_max_name;
++	struct ipmisensors_device_attribute attr_label;
++	char *attr_label_name;
++
++};
++
++/**
++ * &struct_ipmisensors_data stores the data for the ipmisensors driver.
++ */
++struct ipmisensors_data {
++	/* Driver struct */
++	char *driver_name;
++	
++	/* Linked list of ipmisensors_bmc_data structs, one for each BMC */
++	struct list_head bmc_data;
++
++	/* Number of ipmi interfaces (and hence ipmisensors_data structs). */
++	int interfaces;
++
++	/* IPMI kernel interface - SMI watcher */
++	struct ipmi_smi_watcher smi_watcher;
++
++	/* IPMI kernel interface - user handlers */
++	struct ipmi_user_hndl ipmi_hndlrs;
++
++	/* Cache manager for sdrdata cache */
++	struct kmem_cache *sdrdata_cache;
++
++	/* Cache manager for ipmi_sensor_device_attribute cache */
++	struct kmem_cache *sysfsattr_cache;
++};
++
++/**
++ * &states: enumeration of state codes for a bmc specific ipmisensors
++ */
++enum states {
++	STATE_INIT,
++	STATE_RESERVE,
++	STATE_SDR,
++	STATE_SDRPARTIAL,
++	STATE_READING,
++	STATE_UNCANCEL,
++	STATE_SYSTABLE,
++	STATE_DONE
++};
++
++/**
++ * &struct_ipmisensors_bmc_data stores the data for a particular IPMI BMC.
++ */
++struct ipmisensors_bmc_data {
++	struct list_head list;
++
++	/* The IPMI interface number */
++	int interface_id;
++
++	/* The IPMI address */
++	struct ipmi_addr address;
++
++	/* List of sdrdata structs (sdrs) recieved from the BMC */
++	struct list_head sdrs;
++
++	/* Count of the number of sdrs stored in the sdr list */
++	int sdr_count;
++
++	/* next message id */
++	int msgid;
++
++	/* The ipmi interface 'user' used to access this particular bmc */
++	ipmi_user_t user;
++
++	/* BMC IPMI Version (major) */
++	unsigned char ipmi_version_major;
++
++	/* BMC IPMI Version (minor) */
++	unsigned char ipmi_version_minor;
++
++	/* The size of the SDR request message */
++	int ipmi_sdr_partial_size;
++
++	/* transmit message buffer */
++	struct kernel_ipmi_msg tx_message;
++
++	/* ipmi transmited data buffer */
++	unsigned char tx_msg_data[IPMI_MAX_MSG_LENGTH + 50];	/* why the +50 in bmcsensors? */
++
++	/* ipmi recieved data buffer */
++	unsigned char rx_msg_data[IPMI_MAX_MSG_LENGTH + 50];
++
++	/* current recieve buffer offset */
++	int rx_msg_data_offset;
++
++	/* The id of then next SDR record to read during update cycle */
++	u16 nextrecord;
++
++	/* BMC SDR Reservation ID */
++	u16 resid;
++
++	/* Alarm status */
++	u8 alarms;
++
++	/* The cumalative error count for this bmc */
++	int errorcount;
++
++	/* The current state of this bmc w.r.t. ipmisensors (see enum states) */
++	int state;
++
++	/* The current sdr for which a reading is pending */
++	struct sdrdata *current_sdr;
++
++	/* The BMC's device struct */
++	struct device *dev;
++
++	/* hwmon class device */
++	struct class_device *class_dev;
++
++	/* hwmon device name */
++	struct device_attribute name_attr;
++
++	/* alarms attribute */
++	struct ipmisensors_bmc_device_attribute alarms_attr;
++
++	/* update_period attribute */
++	struct ipmisensors_bmc_device_attribute update_attr;
++
++	/* lower bound on time between updates (in seconds) */
++	unsigned int update_period;
++
++	/* semaphore used to do a headcount of the SDR readings we are waiting
++	 * on in a given bmc update */
++	struct semaphore update_semaphore;
++
++	/* bmc's work struct for updating sensors */
++	struct delayed_work update_work;
++
++	/* bmc's work struct for building the sysfs workqueue */
++	struct work_struct sysfs_work;
++};
+diff -rduNp linux-2.6.22.1.oorig2/include/linux/ipmi.h linux-2.6.22.1/include/linux/ipmi.h
+--- linux-2.6.22.1.oorig2/include/linux/ipmi.h	2007-07-10 20:56:30.000000000 +0200
++++ linux-2.6.22.1/include/linux/ipmi.h	2007-07-24 14:22:26.000000000 +0200
+@@ -300,6 +300,9 @@ int ipmi_create_user(unsigned int       
+    safe, too. */
+ int ipmi_destroy_user(ipmi_user_t user);
+ 
++/* Get the IPMI BMC's device struct */
++struct device *ipmi_get_bmcdevice(int ipmi_intf);
++
+ /* Get the IPMI version of the BMC we are talking to. */
+ void ipmi_get_version(ipmi_user_t   user,
+ 		      unsigned char *major,
+diff -rduNp linux-2.6.22.1.oorig2/include/linux/ipmi_msgdefs.h linux-2.6.22.1/include/linux/ipmi_msgdefs.h
+--- linux-2.6.22.1.oorig2/include/linux/ipmi_msgdefs.h	2007-07-10 20:56:30.000000000 +0200
++++ linux-2.6.22.1/include/linux/ipmi_msgdefs.h	2007-07-24 14:22:26.000000000 +0200
+@@ -45,6 +45,7 @@
+ 
+ #define IPMI_NETFN_APP_REQUEST			0x06
+ #define IPMI_NETFN_APP_RESPONSE			0x07
++#define IPMI_GET_DEVICE_GUID_CMD           0x08
+ #define IPMI_GET_DEVICE_ID_CMD		0x01
+ #define IPMI_COLD_RESET_CMD		0x02
+ #define IPMI_WARM_RESET_CMD		0x03
+@@ -57,6 +58,11 @@
+ #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD	0x2f
+ #define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
+ #define IPMI_GET_CHANNEL_INFO_CMD	0x42
++#define IPMI_RESERVE_SDR		0x22
++#define IPMI_GET_SDR			0x23
++#define IPMI_GET_SENSOR_STATE_READING		0x2D
++#define IPMI_SET_SENSOR_HYSTERESIS		0x24
++#define IPMI_SET_SENSOR_THRESHOLD		0x26
+ 
+ #define IPMI_NETFN_STORAGE_REQUEST		0x0a
+ #define IPMI_NETFN_STORAGE_RESPONSE		0x0b
+@@ -79,10 +85,13 @@
+ #define IPMI_NODE_BUSY_ERR		0xc0
+ #define IPMI_INVALID_COMMAND_ERR	0xc1
+ #define IPMI_TIMEOUT_ERR		0xc3
++#define IPMI_INVALID_RESERVATION_ID	0xc5
+ #define IPMI_ERR_MSG_TRUNCATED		0xc6
+ #define IPMI_REQ_LEN_INVALID_ERR	0xc7
+ #define IPMI_REQ_LEN_EXCEEDED_ERR	0xc8
+ #define IPMI_NOT_IN_MY_STATE_ERR	0xd5	/* IPMI 2.0 */
++#define IPMI_ERR_RETURNING_REQ_BYTES	0xca
++#define IPMI_ERR_PROVIDING_RESPONSE	0xce
+ #define IPMI_LOST_ARBITRATION_ERR	0x81
+ #define IPMI_BUS_ERR			0x82
+ #define IPMI_NAK_ON_WRITE_ERR		0x83