echo "Preconfiguring dash - else dash and bash will be left in a broken state" /var/lib/dpkg/info/dash.preinst install kernelversion='3.2.0-3-kirkwood' export kernelversion # don't leave target image containing apt config of the build host echo "Configuring all packages" export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true export LC_ALL=C LANGUAGE=C LANG=C # allow flash-kernel to work without valid /proc contents # ** this doesn't *really* work, since there are too many checks that fail # in an emulated environment! We'll have to do it by hand below anyway... export FK_MACHINE="Globalscale Technologies Dreamplug" # configure all packages unpacked earlier by multistrap dpkg --configure -a echo "[NOT] Adding source packages to filesystem" dpkg --get-selections > /tmp/selections mkdir -p /sourcecode cd sourcecode cut -f 1 < /tmp/selections | cut -d ':' -f 1 > /tmp/packages # TODO: torouter #apt-get source --download-only `cat /tmp/packages` echo "Removing multistrap sources..." rm /etc/apt/sources.list.d/multistrap*.list apt-get update # sshd may be left running by the postinst, clean that up /etc/init.d/ssh stop echo "Running local package install script from bin/projects-chroot" /packages-chroot # torouter setup echo "Running torouter_preboot.sh..." /usr/bin/torouter_preboot.sh # process installed kernel to create uImage, uInitrd, dtb # using flash-kernel would be a good approach, except it fails in the cross # build environment due to too many environment checks... #FK_MACHINE="Globalscale Technologies Dreamplug" flash-kernel # so, let's do it manually... # flash-kernel's hook-functions provided to mkinitramfs have the unfortunate # side-effect of creating /conf/param.conf in the initrd when run from our # emulated chroot environment, which means our root= on the kernel command # line is completely ignored! repack the initrd to remove this evil... echo "Mangling kernel..." mkdir /tmp/initrd-repack (cd /tmp/initrd-repack ; \ zcat /boot/initrd.img-$kernelversion | cpio -i ; \ rm -f conf/param.conf ; \ find . | cpio --quiet -o -H newc | \ gzip -9 > /boot/initrd.img-$kernelversion) rm -rf /tmp/initrd-repack (cd /boot ; \ cp /usr/lib/linux-image-$kernelversion/kirkwood-dreamplug.dtb dtb ; \ cat vmlinuz-$kernelversion dtb >> temp-kernel ; \ mkimage -A arm -O linux -T kernel -n "Debian kernel $kernelversion" \ -C none -a 0x8000 -e 0x8000 -d temp-kernel uImage ; \ rm -f temp-kernel ; \ mkimage -A arm -O linux -T ramdisk -C gzip -a 0x0 -e 0x0 \ -n "Debian ramdisk $kernelversion" \ -d initrd.img-$kernelversion uInitrd ) # Establish an initial root password echo "Set root password to $rootpassword" echo root:$rootpassword | /usr/sbin/chpasswd # Create a default user echo "Creating $user user, password: $userpassword" useradd $user echo $user:$userpassword | /usr/sbin/chpasswd echo "Removing SSH server keys (will re-generate them on first boot)" rm -f /etc/ssh/ssh_host_* echo "Deleting this very same script" rm -f /install.sh echo "Syncing filesystem just in case something didn't get written" sync echo "End configuration progress by exiting from the chroot" exit