diff options
Diffstat (limited to 'packages/torouter-prep/src')
| -rw-r--r-- | packages/torouter-prep/src/linux-tor-prio.sh | 192 | ||||
| -rw-r--r-- | packages/torouter-prep/src/torouter_config.sh | 157 | ||||
| -rw-r--r-- | packages/torouter-prep/src/torouter_takeover.sh | 3 |
3 files changed, 352 insertions, 0 deletions
diff --git a/packages/torouter-prep/src/linux-tor-prio.sh b/packages/torouter-prep/src/linux-tor-prio.sh new file mode 100644 index 0000000..ea9e0dd --- /dev/null +++ b/packages/torouter-prep/src/linux-tor-prio.sh @@ -0,0 +1,192 @@ +#!/bin/bash +# Written by Marco Bonetti & Mike Perry +# Based on instructions from Dan Singletary's ADSL BW Management HOWTO: +# http://www.faqs.org/docs/Linux-HOWTO/ADSL-Bandwidth-Management-HOWTO.html +# This script is Public Domain. + +############################### README ################################# + +# This script provides prioritization of Tor traffic below other +# traffic on a Linux server. It has two modes of operation: UID based +# and IP based. + +# UID BASED PRIORITIZATION +# +# The UID based method requires that Tor be launched from +# a specific user ID. The "User" Tor config setting is +# insufficient, as it sets the UID after the socket is created. +# Here is a C wrapper you can use to execute Tor and drop privs before +# it creates any sockets. +# +# Compile with: +# gcc -DUID=`id -u tor` -DGID=`id -g tor` tor_wrap.c -o tor_wrap +# +# #include <unistd.h> +# int main(int argc, char **argv) { +# if(initgroups("tor", GID) == -1) { perror("initgroups"); return 1; } +# if(setresgid(GID, GID, GID) == -1) { perror("setresgid"); return 1; } +# if(setresuid(UID, UID, UID) == -1) { perror("setresuid"); return 1; } +# execl("/bin/tor", "/bin/tor", "-f", "/etc/tor/torrc", NULL); +# perror("execl"); return 1; +# } + +# IP BASED PRIORITIZATION +# +# The IP setting requires that a separate IP address be dedicated to Tor. +# Your Torrc should be set to bind to this IP for "OutboundBindAddress", +# "ListenAddress", and "Address". + +# GENERAL USAGE +# +# You should also tune the individual connection rate parameters below +# to your individual connection. In particular, you should leave *some* +# minimum amount of bandwidth for Tor, so that Tor users are not +# completely choked out when you use your server's bandwidth. 30% is +# probably a reasonable choice. More is better of course. +# +# To start the shaping, run it as: +# ./linux-tor-prio.sh +# +# To get status information (useful to verify packets are getting marked +# and prioritized), run: +# ./linux-tor-prio.sh status +# +# And to stop prioritization: +# ./linux-tor-prio.sh stop +# +######################################################################## + +# BEGIN USER TUNABLE PARAMETERS + +DEV=eth0 + +# NOTE! You must START Tor under this UID. Using the Tor User +# config setting is NOT sufficient. See above. +TOR_UID=$(id -u tor) + +# If the UID mechanism doesn't work for you, you can set this parameter +# instead. If set, it will take precedence over the UID setting. Note that +# you need multiple IPs with one specifically devoted to Tor for this to +# work. +#TOR_IP="42.42.42.42" + +# Average ping to most places on the net, milliseconds +RTT_LATENCY=40 + +# RATE_UP must be less than your connection's upload capacity in +# kbits/sec. If it is larger, then the bottleneck will be at your +# router's queue, which you do not control. This will cause congestion +# and a revert to normal TCP fairness no matter what the queing +# priority is. +RATE_UP=5000 + +# RATE_UP_TOR is the minimum speed your Tor connections will have in +# kbits/sec. They will have at least this much bandwidth for upload. +# In general, you probably shouldn't set this too low, or else Tor +# users who use your node will be completely choked out whenever your +# machine does any other network activity. That is not very fun. +RATE_UP_TOR=1500 + +# RATE_UP_TOR_CEIL is the maximum rate allowed for all Tor trafic in +# kbits/sec. +RATE_UP_TOR_CEIL=5000 + +CHAIN=OUTPUT +#CHAIN=PREROUTING +#CHAIN=POSTROUTING + +MTU=1500 +AVG_PKT=900 # should be more like 600 for non-exit nodes + +# END USER TUNABLE PARAMETERS + + + +# The queue size should be no larger than your bandwidth-delay +# product. This is RT latency*bandwidth/MTU/2 + +BDP=$(expr $RTT_LATENCY \* $RATE_UP / $AVG_PKT) + +# Further research indicates that the BDP calculations should use +# RTT/sqrt(n) where n is the expected number of active connections.. + +BDP=$(expr $BDP / 4) + +if [ "$1" = "status" ] +then + echo "[qdisc]" + tc -s qdisc show dev $DEV + tc -s qdisc show dev imq0 + echo "[class]" + tc -s class show dev $DEV + tc -s class show dev imq0 + echo "[filter]" + tc -s filter show dev $DEV + tc -s filter show dev imq0 + echo "[iptables]" + iptables -t mangle -L TORSHAPER-OUT -v -x 2> /dev/null + exit +fi + + +# Reset everything to a known state (cleared) +tc qdisc del dev $DEV root 2> /dev/null > /dev/null +tc qdisc del dev imq0 root 2> /dev/null > /dev/null +iptables -t mangle -D POSTROUTING -o $DEV -j TORSHAPER-OUT 2> /dev/null > /dev/null +iptables -t mangle -D PREROUTING -o $DEV -j TORSHAPER-OUT 2> /dev/null > /dev/null +iptables -t mangle -D OUTPUT -o $DEV -j TORSHAPER-OUT 2> /dev/null > /dev/null +iptables -t mangle -F TORSHAPER-OUT 2> /dev/null > /dev/null +iptables -t mangle -X TORSHAPER-OUT 2> /dev/null > /dev/null +ip link set imq0 down 2> /dev/null > /dev/null +rmmod imq 2> /dev/null > /dev/null + +if [ "$1" = "stop" ] +then + echo "Shaping removed on $DEV." + exit +fi + +# Outbound Shaping (limits total bandwidth to RATE_UP) + +ip link set dev $DEV qlen $BDP + +# Add HTB root qdisc, default is high prio +tc qdisc add dev $DEV root handle 1: htb default 20 + +# Add main rate limit class +tc class add dev $DEV parent 1: classid 1:1 htb rate ${RATE_UP}kbit + +# Create the two classes, giving Tor at least RATE_UP_TOR kbit and capping +# total upstream at RATE_UP so the queue is under our control. +tc class add dev $DEV parent 1:1 classid 1:20 htb rate $(expr $RATE_UP - $RATE_UP_TOR)kbit ceil ${RATE_UP}kbit prio 0 +tc class add dev $DEV parent 1:1 classid 1:21 htb rate $[$RATE_UP_TOR]kbit ceil ${RATE_UP_TOR_CEIL}kbit prio 10 + +# Start up pfifo +tc qdisc add dev $DEV parent 1:20 handle 20: pfifo limit $BDP +tc qdisc add dev $DEV parent 1:21 handle 21: pfifo limit $BDP + +# filter traffic into classes by fwmark +tc filter add dev $DEV parent 1:0 prio 0 protocol ip handle 20 fw flowid 1:20 +tc filter add dev $DEV parent 1:0 prio 0 protocol ip handle 21 fw flowid 1:21 + +# add TORSHAPER-OUT chain to the mangle table in iptables +iptables -t mangle -N TORSHAPER-OUT +iptables -t mangle -I $CHAIN -o $DEV -j TORSHAPER-OUT + + +# Set firewall marks +# Low priority to Tor +if [ ""$TOR_IP == "" ] +then + echo "Using UID-based QoS. UID $TOR_UID marked as low priority." + iptables -t mangle -A TORSHAPER-OUT -m owner --uid-owner $TOR_UID -j MARK --set-mark 21 +else + echo "Using IP-based QoS. $TOR_IP marked as low priority." + iptables -t mangle -A TORSHAPER-OUT -s $TOR_IP -j MARK --set-mark 21 +fi + +# High prio for everything else +iptables -t mangle -A TORSHAPER-OUT -m mark --mark 0 -j MARK --set-mark 20 + +echo "Outbound shaping added to $DEV. Rate for Tor upload at least: ${RATE_UP_TOR}Kbyte/sec." + diff --git a/packages/torouter-prep/src/torouter_config.sh b/packages/torouter-prep/src/torouter_config.sh new file mode 100644 index 0000000..7a6a581 --- /dev/null +++ b/packages/torouter-prep/src/torouter_config.sh @@ -0,0 +1,157 @@ +#!/bin/bash -x + +echo "This program will reconfigure your Debian system into a Torouter" +exit 0 +echo "This is where we'd take over the entire Torouter system" + +# For every file we touch, move it to the temp_dir and then tar it up in the end +temp_dir="`mktemp -d`" + +# Add a user +ADMINUSER="toradmin" +ADMINGROUP="toradmin" + +# Install the Tor repo key +gpg --keyserver keys.gnupg.net --recv 886DDD89 +gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | apt-key add - + +cp /etc/hosts $temp_dir/ +# Stomp on the hosts file +cat << EOF > /etc/hosts +127.0.0.1 localhost +EOF + +cp /etc/hostname $temp_dir/ +# Set us to have a default host name +echo "torouter" > /etc/hostname + +# We need to prep apt to understand that we want packages from other repos +# We append to the current package list +cat << EOF >> /etc/apt/sources.list +# Tor's debian package repo: +deb http://deb.torproject.org/torproject.org squeeze main +deb http://deb.torproject.org/torproject.org experimental-squeeze main + +# Add Debian backports for OpenNTPD, libminiupnpc-dev, libminiupnpc5 +# http://packages.debian.org/squeeze-backports/libminiupnpc-dev +deb http://backports.debian.org/debian-backports squeeze-backports main contrib non-free + +# Add Debian experimental for libnatpmp0 +# http://packages.debian.org/experimental/libnatpmp0 +deb http://ftp.debian.org/debian experimental main +deb-src http://ftp.debian.org/debian experimental main + +EOF + +# We're creating this file to ensure we get updates +cat << 'EOF' > /etc/apt/preferences.d/backports +Package: * +Pin: release a=squeeze-backports +Pin-Priority: 200 +EOF + +apt-get -y update + +# Install some other packages here: +apt-get -y install denyhosts ufw + +# Allow us to set the clock: +apt-get -y -t squeeze-backports install openntpd + +# Install Tor and deps: +apt-get -y install tor tor-geoipdb + +# To build with natpmp support +apt-get -y -t experimental install libnatpmp0 + +# To build with miniupnpc support +apt-get -y -t squeeze-backports install libminiupnpc-dev +apt-get -y -t squeeze-backports install libminiupnpc5 + +# XXX +# We want to apt-get source tor and build it for the 0.2.3.x branch +# + +# Install a Tor controller: +apt-get -y install tor-arm + +# Install a normal dns cache for eth1 +apt-get -y install dnsmasq + +## +## Configuration stage of the script +## + +# Configure arm +zcat /usr/share/doc/tor-arm/armrc.sample.gz > ~$(ADMINUSER)/.armrc +# XXX This is where we will call torrc-takeover.py when it is packaged + +# XXX We should reconfigure /etc/inittab here + +# Configure the network +# eth0 is our "internet" interface with a dhcp client +cat << 'EOF' > /etc/network/interfaces +# The primary network interface +allow-hotplug eth0 +iface eth0 inet dhcp + +# +# XXX Configure eth1 and ap0 here +# + +EOF + +# XXX We should configure ufw here +# ufw allow +# XXX We should configure denyhosts +# XXX We should configure dnsmasq +# XXX We should configure the DHCP server here + +cp /etc/tor/torrc $temp_dir/ +# configure Tor and stomp on the current Tor config +cat << 'EOF' > /etc/tor/torrc +# Run Tor as a bridge/relay only, not as a client +SocksPort 0 + +# What port to advertise for incoming Tor connections +ORPort 443 + +# We're on a flash file system +AvoidDiskWrites 1 + +# Be a bridge +BridgeRelay 1 + +# Rate limited +BandwidthRate 50KB + +# Don't allow any Tor traffic to exit +Exitpolicy reject *:* + +# Allow a controller (tor-arm) on this system to configure Tor: +ControlPort 9051 +ControlListenAddress 127.0.0.1:9051 +CookieAuthentication 1 +EOF + +# Remove a bunch of stuff: +apt-get -y remove exim4-base exim4-config exim4-daemon-light dbus + +## Disable ipv6 support +cp /etc/sysctl.d/disableipv6.conf $temp_dir/ +echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf +cp /etc/sshd_config $temp_dir/ +echo "AddressFamily inet" >> /etc/ssh/ssh_config + +## +## Restart services here +## + +/etc/init.d/ssh restart +/etc/init.d/tor restart + +## +## Touch a stamp to show that we're now a Torouter +## + +echo "torouter" > /etc/torouter diff --git a/packages/torouter-prep/src/torouter_takeover.sh b/packages/torouter-prep/src/torouter_takeover.sh new file mode 100644 index 0000000..2b76502 --- /dev/null +++ b/packages/torouter-prep/src/torouter_takeover.sh @@ -0,0 +1,3 @@ +# This program will wrap debtakeover: +# http://www.hadrons.org/~guillem/debian/debtakeover/ + |