diff options
Diffstat (limited to 'packages/dreamplug-uaputl/config/uaputl.conf')
| -rw-r--r-- | packages/dreamplug-uaputl/config/uaputl.conf | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/packages/dreamplug-uaputl/config/uaputl.conf b/packages/dreamplug-uaputl/config/uaputl.conf new file mode 100644 index 0000000..0899b51 --- /dev/null +++ b/packages/dreamplug-uaputl/config/uaputl.conf @@ -0,0 +1,95 @@ +# File : uap.conf + + +ap_config={ + SSID="Marvell Micro AP" # SSID of Micro AP + BeaconPeriod=100 # Beacon period in TU + Channel=6 # Radio Channel 6 +# Channel=0,1 # auto channel select (MCS mode) + ChanList=1,6,11 # Scan channel list +# AP_MAC=00:34:22:77:46:41 # MAC address of AP + RxAntenna=0 # 0 for Antenna A + # 1 for Antenna B + TxAntenna=0 # 0 for Antenna A + # 1 for Antenna B + Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c + # Set of data rate that a station + # in the BSS may use + # (in unit of 500 kilobit/s) + TxPowerLevel=13 # Transmit power level in dBm + BroadcastSSID=1 # Broadcast SSID feature + # 1: Enable 0:Disable + RTSThreshold=2347 # RTS threshold value + FragThreshold=2346 # Fragmentation threshold value + DTIMPeriod=1 # DTIM period in beacon periods + RadioControl=1 # 0: radio on 1: radio off + MCBCdataRate=0 # MCBC rate to use for packet transmission + # 0:auto + # >0 fix rate (in unit of 500 kilobit/s) + TxDataRate=0 # Data rate to use for packet transmission + # 0:auto + # >0 fix rate (in unit of 500 kilobit/s) + PktFwdCtl=1 # Packet forwarding control + # 0: forward all packets to the host + # 1: firmware handles intr-BSS packets + StaAgeoutTimer=1800 # Inactive client station age out timer value + # in units of 100ms + MaxStaNum=8 # Max number of stations allowed to connect + Retrylimit=7 # Retry limit to use for packet transmissions + AuthMode=0 # 0:Open authentication + # 1:shared key authentication + # 2: Static WEP + Protocol=1 # protocol to use + # 1: No security 2: Static WEP + # 8: WPA 32: WPA2 40:WPA2 Mixed Mode + RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled + +# **** WEP security setting****** +# KeyIndex=0 # Index of WEP key to use (0 to 3) +# Sample Key configurations are +# Key_0="55555" +# Key_1=1234567890 +# Key_2="1234567890123" +# Key_3=12345678901234567890123456 + + +# **** WPA/WPA2 PSK setting****** + +# PairwiseCipher=4 # Pairwise cipher type + # 0: None + # 4: TKIP 8: AES CCMP + # 12: AES CCMP + TKIP +# GroupCipher=4 # group cipher type + # 0: None + # 4: TKIP 8: AES CCMP +# PSK="1234567890" # WPA/WPA2 passphrase + GroupRekeyTime= 86400 # Group key re-key interval, in second. + # 0 mean never re-key + #802.11D specific configuration + 11d_enable=0 # 0-disable 1-enable +# country=US # country information +} + + + +ap_mac_filter={ + FilterMode=0 # Mode of filter table + # 0: filter table is disabled + # 1: allow MAC address in the filter table to associate + # 2: block MAC address in the filter table + Count=0 # Number of entries in filter table,up to 16 +#Sample mac settings are +# mac_1=00:50:23:45:76:22 # mac address +# mac_2=00:34:22:77:46:34 # mac address +} + +#custom_ie_config={ +# MgmtSubtypeMask_0=0x1 +# IEBuffer_0=0x6403736976 +# MgmtSubtypeMask_1=0x2 +# IEBuffer_1=0x650473697661 +# MgmtSubtypeMask_2=0x4 +# IEBuffer_2=0x6606736976617273 +# MgmtSubtypeMask_3=0x8 +# IEBuffer_3=0x6606736976617573 +#} |