diff options
Diffstat (limited to 'packages/dreamplug-uaputl/config/uaputl.conf')
-rw-r--r-- | packages/dreamplug-uaputl/config/uaputl.conf | 95 |
1 files changed, 0 insertions, 95 deletions
diff --git a/packages/dreamplug-uaputl/config/uaputl.conf b/packages/dreamplug-uaputl/config/uaputl.conf deleted file mode 100644 index 0899b51..0000000 --- a/packages/dreamplug-uaputl/config/uaputl.conf +++ /dev/null @@ -1,95 +0,0 @@ -# File : uap.conf - - -ap_config={ - SSID="Marvell Micro AP" # SSID of Micro AP - BeaconPeriod=100 # Beacon period in TU - Channel=6 # Radio Channel 6 -# Channel=0,1 # auto channel select (MCS mode) - ChanList=1,6,11 # Scan channel list -# AP_MAC=00:34:22:77:46:41 # MAC address of AP - RxAntenna=0 # 0 for Antenna A - # 1 for Antenna B - TxAntenna=0 # 0 for Antenna A - # 1 for Antenna B - Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c - # Set of data rate that a station - # in the BSS may use - # (in unit of 500 kilobit/s) - TxPowerLevel=13 # Transmit power level in dBm - BroadcastSSID=1 # Broadcast SSID feature - # 1: Enable 0:Disable - RTSThreshold=2347 # RTS threshold value - FragThreshold=2346 # Fragmentation threshold value - DTIMPeriod=1 # DTIM period in beacon periods - RadioControl=1 # 0: radio on 1: radio off - MCBCdataRate=0 # MCBC rate to use for packet transmission - # 0:auto - # >0 fix rate (in unit of 500 kilobit/s) - TxDataRate=0 # Data rate to use for packet transmission - # 0:auto - # >0 fix rate (in unit of 500 kilobit/s) - PktFwdCtl=1 # Packet forwarding control - # 0: forward all packets to the host - # 1: firmware handles intr-BSS packets - StaAgeoutTimer=1800 # Inactive client station age out timer value - # in units of 100ms - MaxStaNum=8 # Max number of stations allowed to connect - Retrylimit=7 # Retry limit to use for packet transmissions - AuthMode=0 # 0:Open authentication - # 1:shared key authentication - # 2: Static WEP - Protocol=1 # protocol to use - # 1: No security 2: Static WEP - # 8: WPA 32: WPA2 40:WPA2 Mixed Mode - RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled - -# **** WEP security setting****** -# KeyIndex=0 # Index of WEP key to use (0 to 3) -# Sample Key configurations are -# Key_0="55555" -# Key_1=1234567890 -# Key_2="1234567890123" -# Key_3=12345678901234567890123456 - - -# **** WPA/WPA2 PSK setting****** - -# PairwiseCipher=4 # Pairwise cipher type - # 0: None - # 4: TKIP 8: AES CCMP - # 12: AES CCMP + TKIP -# GroupCipher=4 # group cipher type - # 0: None - # 4: TKIP 8: AES CCMP -# PSK="1234567890" # WPA/WPA2 passphrase - GroupRekeyTime= 86400 # Group key re-key interval, in second. - # 0 mean never re-key - #802.11D specific configuration - 11d_enable=0 # 0-disable 1-enable -# country=US # country information -} - - - -ap_mac_filter={ - FilterMode=0 # Mode of filter table - # 0: filter table is disabled - # 1: allow MAC address in the filter table to associate - # 2: block MAC address in the filter table - Count=0 # Number of entries in filter table,up to 16 -#Sample mac settings are -# mac_1=00:50:23:45:76:22 # mac address -# mac_2=00:34:22:77:46:34 # mac address -} - -#custom_ie_config={ -# MgmtSubtypeMask_0=0x1 -# IEBuffer_0=0x6403736976 -# MgmtSubtypeMask_1=0x2 -# IEBuffer_1=0x650473697661 -# MgmtSubtypeMask_2=0x4 -# IEBuffer_2=0x6606736976617273 -# MgmtSubtypeMask_3=0x8 -# IEBuffer_3=0x6606736976617573 -#} |