1 files changed, 0 insertions, 77 deletions
diff --git a/freedom-maker/source/install.sh b/freedom-maker/source/install.sh
deleted file mode 100644
index fc13d2b..0000000
--- a/freedom-maker/source/install.sh
+++ /dev/null
@@ -1,77 +0,0 @@
-echo "Preconfiguring dash - else dash and bash will be left in a broken state"
-/var/lib/dpkg/info/dash.preinst install
-
-# don't leave target image containing apt config of the build host
-echo "Configuring all packages"
-export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
-export LC_ALL=C LANGUAGE=C LANG=C
-
-# allow flash-kernel to work without valid /proc contents
-# ** this doesn't *really* work, since there are too many checks that fail
-#    in an emulated environment!  We'll have to do it by hand below anyway...
-export FK_MACHINE="Globalscale Technologies Dreamplug"
-
-# configure all packages unpacked earlier by multistrap
-dpkg --configure -a
-
-echo "Adding source packages to filesystem"
-dpkg --get-selections > /tmp/selections
-mkdir -p /sourcecode
-cd sourcecode
-cut -f 1 < /tmp/selections | cut -d ':' -f 1 > /tmp/packages
-# TODO: torouter
-#apt-get source --download-only `cat /tmp/packages`
-
-# sshd may be left running by the postinst, clean that up
-/etc/init.d/ssh stop
-
-# process installed kernel to create uImage, uInitrd, dtb
-#  using flash-kernel would be a good approach, except it fails in the cross
-#  build environment due to too many environment checks...
-#FK_MACHINE="Globalscale Technologies Dreamplug" flash-kernel
-#  so, let's do it manually...
-
-# flash-kernel's hook-functions provided to mkinitramfs have the unfortunate
-# side-effect of creating /conf/param.conf in the initrd when run from our
-# emulated chroot environment, which means our root= on the kernel command
-# line is completely ignored!  repack the initrd to remove this evil...
-
-mkdir /tmp/initrd-repack
-(cd /tmp/initrd-repack ; \
-    zcat /boot/initrd.img-3.2.0-3-kirkwood | cpio -i ; \
-    rm -f conf/param.conf ; \
-    find . | cpio --quiet -o -H newc | \
-	gzip -9 > /boot/initrd.img-3.2.0-3-kirkwood )
-rm -rf /tmp/initrd-repack
-
-(cd /boot ; \
-    cp /usr/lib/linux-image-3.2.0-3-kirkwood/kirkwood-dreamplug.dtb dtb ; \
-    cat vmlinuz-3.2.0-3-kirkwood dtb >> temp-kernel ; \
-    mkimage -A arm -O linux -T kernel -n 'Debian kernel 3.2.0-3-kirkwood' \
-	-C none -a 0x8000 -e 0x8000 -d temp-kernel uImage ; \
-    rm -f temp-kernel ; \
-    mkimage -A arm -O linux -T ramdisk -C gzip -a 0x0 -e 0x0 \
-	-n 'Debian ramdisk 3.2.0-3-kirkwood' \
-	-d initrd.img-3.2.0-3-kirkwood uInitrd )
-
-# Establish an initial root password
-echo "Set root password to "$rootpassword
-echo root:$rootpassword | /usr/sbin/chpasswd
-
-# Create a default user
-echo "Creating fbx user, password: $userpassword"
-useradd $user
-echo $user:$userpassword | /usr/sbin/chpasswd
-
-# By default, spawn a console on the serial port
-echo "Adding a getty on the serial port"
-echo "T0:12345:respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab
-
-echo "Deleting this very same script"
-rm -f /install.sh
-
-echo "Syncing filesystem just in case something didn't get written"
-sync
-
-echo "End configuration progress by exiting from the chroot"
-exit