aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorficus <ficus@robocracy.org>2012-10-04 16:13:54 +0200
committerficus <ficus@robocracy.org>2012-10-04 16:29:05 +0200
commit60eb2616ed83209b8e46aba14c19814ab4f4c1c6 (patch)
treea17d4c26d47148cb2b2c96470ecc22c993fcf7be
parentfcf6a8630b7ae818e7719d6e811d01d9359388c3 (diff)
downloadtorouter-60eb2616ed83209b8e46aba14c19814ab4f4c1c6.tar.gz
torouter-60eb2616ed83209b8e46aba14c19814ab4f4c1c6.zip
sd card refactor
-rw-r--r--README114
-rw-r--r--TODO12
-rw-r--r--doc/sd_card.txt44
-rw-r--r--doc/uboot.txt45
-rw-r--r--freedom-maker/bin/copy2dream47
-rw-r--r--freedom-maker/flashing-notes28
-rw-r--r--freedom-maker/source/boot/uboot.2012.04.01-2_armel.elfbin0 -> 228948 bytes
-rw-r--r--freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwbbin0 -> 196076 bytes
-rw-r--r--freedom-maker/source/boot/uboot.env8
-rw-r--r--packages/torouter-prep/configs/etc/fstab4
-rw-r--r--packages/torouter-prep/configs/sbin/copy2dream2
-rwxr-xr-xpackages/torouter-prep/src/torouter_preboot.sh38
12 files changed, 197 insertions, 145 deletions
diff --git a/README b/README
index 2a034e6..fef4a79 100644
--- a/README
+++ b/README
@@ -9,49 +9,56 @@ Project wiki page: https://trac.torproject.org/projects/tor/wiki/doc/Torouter
= Repository Contents =
README this file
- ./doc (WIP) text file user and developer documentation
+ ./doc user and developer documentation
./freedom-maker firmware build scripts
./config torouter configuration files
./packages source for torouter-specific software packages
= Installation and Build Instructions =
-There are several ways to get the debian-based torouter system running on a
+There are a couple ways to get the debian-based torouter system running on a
DreamPlug device:
- - Flash a pre-built image onto an external USB stick
-
- - Flash a pre-built image onto an internal microSD card
-
- - Build and flash a new image from source
+ - Flash a pre-built image onto an SD card
- Install the FreedomBox distribution or a "vanilla" debian, then run a
torouter takeover/upgrade script
-For the later, see the "Building" section, then follow either the USB stick or
-microSD card directions.
+ - Build and flash a new image from source (perhaps with modifications)
+
+For the later, see the "Building" section, then follow the SD card directions.
Regardless of the installation method and target, if the device is in a
"factory fresh" state some bootloader preparation is required. See the
"DreamPlug Preparation" section below; you will need serial console access to
-the DreamPlug, for example with the sometimes included GuruPlug JTAG device.
+the DreamPlug, for example with the (sometimes bundled) GuruPlug JTAG device.
-=== Flash Pre-Built Image to External USB stick ===
-TODO:
+=== Flash Pre-Built Image to an SD card ===
- $ dd if=$IMGFILE of=$USBBASEDEV
+The command to write a raw image file $IMGFILE to an SD card connected via a
+USB adapter with block device $USBBASEDEV is:
-=== Flash Pre-Built Image to Internal microSD card ===
+ $ dd bs=1M if=$IMGFILE of=$USBBASEDEV
-TODO:
+On linux you can try to figure out the $USBBASEDEV using the 'lsblk' command;
+you are looking for the base device (eg, /dev/sdb) not a partition (eg,
+/dev/sdb2). The SD care should not be mounted; use 'umount' to unmount the card
+if any partitions were mounted automatically for some reason.
- $ dd if=$IMGFILE of=$USBBASEDEV
+ !!! Be careful not to overwrite the wrong base device !!!
-Mount the device, make changes to /etc/fstab. Also need to make changes to the
-initrd image?
+If the downloaded image name is "torouter-unstable-20120928-4GB-USB.img.gz" and
+the SD card block device is "/dev/sdb", first unzip the image file and dd it to
+the card:
-Make changes to u-boot configuration.
+ $ gunzip torouter-unstable-20120928-4GB-USB.img.gz
+ $ sudo dd bs=1M if=./torouter-unstable-20120928-4GB-USB.img of=/dev/sdb
+ $ sync # doesn't hurt
+
+You can then remove the SD card, put it in your DreamPlug, and boot up. If this
+is the first boot with a factory-fresh DreamPlug, you'll need to configure
+u-boot; see below.
=== Torouter Takeover Script ===
@@ -96,48 +103,61 @@ Then enter the freedom-maker directory and run a build:
$ sudo ./buildrootfs.sh
If that was ultimately successful (you can ignore some apt warnings and errors
-that may scroll by), you now have a root filesystem ready to be copied to a USB
-stick. Insert a USB storage device and partition it to have a small (~80MB)
-boot partition followed by an ext3 root partition (1GB or so minimum). Make
-note of the boot and root partition nodes (eg, $BOOTNODE=/dev/sdc1 and
-$ROOTNODE=/dev/sdc2), then copy over the built distribution:
+that may scroll by), you now have a root filesystem ready to be copied to an SD
+card. Insert a card and partition it to have a small (~80MB)
+boot partition followed by an ext3 root partition (1GB or so minimum). You
+might want to take care and block align the partitions to get better write
+performance; see ./doc/sd_card.txt for more info. Make note of the boot and
+root partition nodes (eg, $BOOTNODE=/dev/sdc1 and $ROOTNODE=/dev/sdc2), then
+copy over the built distribution:
$ sudo ./copy2card.sh $BOOTNODE $ROOTNODE
-If that was successful, contratulations, you now have a usable torouter thumb
-stic! You could skip ahead now to DreamPlug Perparation.
+If that was successful, contratulations, you now have a usable torouter SD
+card! You could skip ahead now to DreamPlug Perparation.
If you want to dump your fresh un-booted image to a static .img file (which
-could be distributed to others or flashed to another stick quickly), run the
+could be distributed to others or flashed to another card quickly), run the
copy2img.sh script with the "base" device of the thumbstick as an argument (eg,
$STICKNODE=/dev/sdc):
$ sudo ./copy2img.sh $STICKNODE
+And then rename the .img file produced to something more memorable.
+
=== DreamPlug Preparation ===
Prepping a vanilla DreamPlug device is somewhat involved and will require a
access to the hardware serial console (eg, using a GuruPlug-branded JTAG device
functions as a USB serial console adapter).
-First, upgrade u-boot to a recent version (see directions in freedom-maker
-directory), then set the appropriate bootloader environment variables:
-
- baudrate=115200
- bootargs=console=ttyS0,115200 root=/dev/sdc2 rootdelay=10
- bootcmd=${x_bootcmd_usb}; ${x_bootcmd_kernel}; ${x_bootcmd_initrd}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000 0x6900000;
- bootdelay=3
- filesize=2982D0
- stderr=serial
- stdin=serial
- stdout=serial
- x_bootargs=console=ttyS0,115200
- x_bootargs_root=root=/dev/sdc2 rootdelay=10
- x_bootcmd_ethernet=ping 192.168.2.1
- x_bootcmd_initrd=fatload usb 2:1 0x6900000 uInitrd
- x_bootcmd_kernel=fatload usb 2:1 0x6400000 uImage
- x_bootcmd_usb=usb start
-
-FYI, there are at least two variants of the DreamPlug hardware, with slightly
-differing chipsets.
+The default SD card images include the u-boot firmware required to boot from
+the card. Insert a flashed SD card into the DreamPlug and connect to the
+powered-off DreamPlug using the serial converter with the screen command:
+
+ $ screen /dev/ttyUSB0 115200
+
+Power up the DreamPlug and quickly press enter in the screen session to
+interrupt boot. Then enter the following commands into the running u-boot
+session (change the last argument of the 'sf write' line, in hex, if the .kwb
+file size changes from exactly 196076 bytes):
+
+ usb start
+ fatload usb 1 0x6400000 uboot.2012.04.01-2_armel.kwb
+ sf probe 0
+ sf erase 0x0 0x80000
+ sf write 0x6400000 0x0 0x2fdec
+ setenv baudrate 115200
+ setenv bootcmd '${x_bootcmd_usb}; ${x_bootcmd_kernel}; ${x_bootcmd_initrd}; setenv bootargs ${x_bootargs} ${x_bootargs_root} ${x_bootargs_console}; bootm 0x6400000 0x6900000;'
+ setenv x_bootargs_console 'ttyS0,115200'
+ setenv x_bootargs_root 'root=/dev/sdb2 rootdelay=10'
+ setenv x_bootcmd_initrd 'fatload usb 1:1 0x6900000 uInitrd'
+ setenv x_bootcmd_kernel 'fatload usb 1:1 0x6400000 uImage'
+ setenv x_bootcmd_usb 'usb start'
+ saveenv
+ reset
+
+The DreamPlug should now boot straight up as a torouter; connect via ethernet
+on the LAN port (eth1, "to the right") to access the web user interface and
+configure wifi.
diff --git a/TODO b/TODO
index 21dc926..cc82c0d 100644
--- a/TODO
+++ b/TODO
@@ -1,3 +1,13 @@
- fix signing key for torrouter.torproject.org (should have a keyring .deb)
- re-enable source builds in install.sh
-- random apt-get segfault issue
+- fix/clarify current broken DNS situation
+- .onion addresses don't "just work" yet
+- clarify u-boot and bootloader configuration in docs
+- easy_setup is out of date
+- need a custom kernel build and package system for grsec etc patches
+- include updated u-boot image and env config in /boot
+- include "man" and documentation files
+- install/configure power management tools (to minimize consumption)
+
+might not fix:
+- kernel flashing code in install.sh is kernel-version specific
diff --git a/doc/sd_card.txt b/doc/sd_card.txt
new file mode 100644
index 0000000..25a2d65
--- /dev/null
+++ b/doc/sd_card.txt
@@ -0,0 +1,44 @@
+
+torouter is intended to boot and run from an SD. it could theoretically also
+run from an internal microSD card, a USB stick, or an eSATA drive, but
+specifying use of the SD card makes support, development, and documentation
+easier. the SD card can easily be popped out of the router and reflashed with a
+new image.
+
+The SD card should be at least 2GB in size and support reasonable read/write
+speeds, so probably a "class 6" quality card, which can be ##########
+
+you really should get a decent card: there can be an order of magnitude
+difference in performance between a cheap card and a fast card.
+
+quick (but shady?) way to check read and write card performance on a
+high-performance machine:
+
+ $ # unmount the card for read test
+ $ hdparm -t /dev/sdb # iff /dev/sdb is the card
+ $ # mount the card for write test
+ $ dd count=10 bs=1M if=/dev/urandom of=/mnt/disktest
+
+
+HOWTO Prepare an SD Card for building (using debian)
+--------------------------------------------------------
+
+Insert a 4GB+ SD card into to your dev computer (using an adapter if necessary).
+
+Use lsblk to figure out which block device the card is (eg, /dev/sdc).
+
+Use gparted (as root) to create two logical paritions: first, a 128MB FAT32
+(msdos) boot partition, and second an ext4 root partition using the remainder
+of the space.
+
+Once the paritions are created, and you have confirmed that the partitions
+exist and are in the correct order (eg, small boot on /dev/sdc1, rootfs on
+/dev/sdc2), you are ready to copy over a fresh build using
+freedom-maker/copy2card.sh and then create an image file using
+freedom-maker/copy2img.sh.
+
+Optionally, follow these directions to generate block-aligned partitions for
+better write performance:
+
+http://linux-howto-guide.blogspot.de/2009/10/increase-usb-flash-drive-write-speed.html
+http://www.olpcnews.com/forum/index.php?topic=4993.0
diff --git a/doc/uboot.txt b/doc/uboot.txt
new file mode 100644
index 0000000..8904980
--- /dev/null
+++ b/doc/uboot.txt
@@ -0,0 +1,45 @@
+
+Factory-configured DreamPlugs need their internal u-boot firmware updated and
+re-configured to boot from the SD card.
+
+You may want to remove the internal microSD card for the sake of simplicity.
+This will result in u-boot and linux boot warnings, but these can be ignored.
+
+The desired u-boot configuration is:
+
+ baudrate=115200
+ bootargs=console=ttyS0,115200 root=/dev/sdb2 rootdelay=10
+ bootcmd=${x_bootcmd_usb}; ${x_bootcmd_kernel}; ${x_bootcmd_initrd}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000 0x6900000;
+ x_bootargs=console=ttyS0,115200
+ x_bootargs_root=root=/dev/sdb2 rootdelay=10
+ x_bootcmd_initrd=fatload usb 1:1 0x6900000 uInitrd
+ x_bootcmd_kernel=fatload usb 1:1 0x6400000 uImage
+ x_bootcmd_usb=usb start
+
+HOWTO: flash and configure u-boot
+-----------------------------------
+
+The default SD card images include the u-boot firmware required to boot from
+the card. Insert a flashed SD card into the DreamPlug and connect with screen:
+
+ $ screen /dev/ttyUSB0 115200
+
+Power up the DreamPlug and quickly press enter in the screen session to
+interrupt boot. Then enter the following commands into the running u-boot
+session (change the last argument of the 'sf write' line, in hex, if the .kwb
+file size changes from exactly 196076 bytes):
+
+ usb start
+ fatload usb 1 0x6400000 uboot.2012.04.01-2_armel.kwb
+ sf probe 0
+ sf erase 0x0 0x80000
+ sf write 0x6400000 0x0 0x2fdec
+ setenv baudrate 115200
+ setenv bootcmd '${x_bootcmd_usb}; ${x_bootcmd_kernel}; ${x_bootcmd_initrd}; setenv bootargs ${x_bootargs} ${x_bootargs_root} ${x_bootargs_console}; bootm 0x6400000 0x6900000;'
+ setenv x_bootargs_console 'ttyS0,115200'
+ setenv x_bootargs_root 'root=/dev/sdb2 rootdelay=10'
+ setenv x_bootcmd_initrd 'fatload usb 1:1 0x6900000 uInitrd'
+ setenv x_bootcmd_kernel 'fatload usb 1:1 0x6400000 uImage'
+ setenv x_bootcmd_usb 'usb start'
+ saveenv
+ reset
diff --git a/freedom-maker/bin/copy2dream b/freedom-maker/bin/copy2dream
deleted file mode 100644
index 267c2b6..0000000
--- a/freedom-maker/bin/copy2dream
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# this script assumes the current root filesystem is the source, and the
-# internal microSD on a DreamPlug is the target .. all existing content on
-# the microSD card will be lost.
-#
-
-# partition microSD card inside DreamPlug
-echo "=> partition internal microSD card"
-parted -s /dev/sda mklabel msdos
-parted -s /dev/sda mkpart primary fat16 0 128
-parted -s /dev/sda mkpart primary ext2 128 100%
-
-# create filesystems on new partitions
-echo "=> create filesystems on internal microSD card"
-mkdosfs /dev/sda1
-mke2fs -j /dev/sda2
-
-echo "=> mount target partitions"
-mount /dev/sda2 /media
-mkdir -p /media/boot
-mount /dev/sda1 /media/boot
-
-echo "=> copy filesystem content from USB stick to target partitions"
-(cd / ; tar cpSf - `/bin/ls | grep -v boot | grep -v proc | grep -v sys | grep -v media | grep -v dev`) | (cd /media ; tar xpf -)
-# the following intentionally ignores subdirectories
-cp /boot/* /media/boot/
-
-echo "=> touch up target root partition"
-mkdir /media/proc /media/sys /media/media /media/dev
-mknod /media/dev/console c 5 1
-mknod /media/dev/random c 1 8
-mknod /media/dev/urandom c 1 9
-mknod /media/dev/null c 1 3
-mknod /media/dev/ptmx c 5 2
-
-# patch up /etc/fstab entry for /boot
-sed -e 's/sdc/sda/g' < /etc/fstab > /media/etc/fstab
-
-# flash the kernel and create the device's keys
-chroot /media /etc/init.d/first-run
-
-echo "unmount target partitions"
-umount /dev/sda1
-umount /dev/sda2
-
-echo "=> installation complete, see docs to boot from internal microSD"
diff --git a/freedom-maker/flashing-notes b/freedom-maker/flashing-notes
deleted file mode 100644
index def3f61..0000000
--- a/freedom-maker/flashing-notes
+++ /dev/null
@@ -1,28 +0,0 @@
-Jason <u-boot@lakedaemon.net> says:
-
- Sort of. The openocd config for the sheevaplug/guruplug is what I use,
- and is distributed on the dreamplug download page [1]. It does _not_
- have support for the SPI flash. You can also use the sheevaplug.cfg
- shipped with openocd. So, I use openocd or tftp to transfer to RAM,
- then use u-boot to write to flash.
-
- To test images, or to reflash, I load the known-good u-boot into RAM via
- openocd, then I'll either reflash it or load a new testing one from
- there.
-
- To write a u-boot.kwb test image to flash, here is what I do:
-
- openocd$ sheevaplug_init
- openocd$ load_image u-boot # known good from Marvell
- openocd$ load_image u-boot.kwb 0x00800000 # monster I created
- openocd$ resume 0x00600000 # run the known good
-
- then, in u-boot
-
- u-boot$ sf probe 0
- u-boot$ sf erase 0x0 0x100000
- u-boot$ sf write 0x00800000 0x0 0x100000
-
- If time allows, I'd like to add SPI flash support to OpenOCD.
- Unfortunately, time is short and the above process works.
-
diff --git a/freedom-maker/source/boot/uboot.2012.04.01-2_armel.elf b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.elf
new file mode 100644
index 0000000..ab58a26
--- /dev/null
+++ b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.elf
Binary files differ
diff --git a/freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwb b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwb
new file mode 100644
index 0000000..c524936
--- /dev/null
+++ b/freedom-maker/source/boot/uboot.2012.04.01-2_armel.kwb
Binary files differ
diff --git a/freedom-maker/source/boot/uboot.env b/freedom-maker/source/boot/uboot.env
new file mode 100644
index 0000000..06cb618
--- /dev/null
+++ b/freedom-maker/source/boot/uboot.env
@@ -0,0 +1,8 @@
+setenv baudrate 115200
+setenv bootcmd '${x_bootcmd_usb}; ${x_bootcmd_kernel}; ${x_bootcmd_initrd}; setenv bootargs ${x_bootargs} ${x_bootargs_root} ${x_bootargs_console}; bootm 0x6400000 0x6900000;'
+setenv x_bootargs_console 'ttyS0,115200'
+setenv x_bootargs_root 'root=/dev/sdb2 rootdelay=10'
+setenv x_bootcmd_initrd 'fatload usb 1:1 0x6900000 uInitrd'
+setenv x_bootcmd_kernel 'fatload usb 1:1 0x6400000 uImage'
+setenv x_bootcmd_usb 'usb start'
+saveenv
diff --git a/packages/torouter-prep/configs/etc/fstab b/packages/torouter-prep/configs/etc/fstab
index 7c48827..c4318d3 100644
--- a/packages/torouter-prep/configs/etc/fstab
+++ b/packages/torouter-prep/configs/etc/fstab
@@ -1,6 +1,6 @@
-/dev/sdc2 / auto relatime,rw 0 0
+/dev/sdb2 / auto relatime,rw 0 0
proc /proc proc none 0 0
sys /sys sysfs none 0 0
none /dev/pts devpts defaults 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev 0 0
-/dev/sdc1 /boot vfat defaults 0 0
+/dev/sdb1 /boot vfat defaults 0 0
diff --git a/packages/torouter-prep/configs/sbin/copy2dream b/packages/torouter-prep/configs/sbin/copy2dream
index 267c2b6..d171bdf 100644
--- a/packages/torouter-prep/configs/sbin/copy2dream
+++ b/packages/torouter-prep/configs/sbin/copy2dream
@@ -35,7 +35,7 @@ mknod /media/dev/null c 1 3
mknod /media/dev/ptmx c 5 2
# patch up /etc/fstab entry for /boot
-sed -e 's/sdc/sda/g' < /etc/fstab > /media/etc/fstab
+sed -e 's/sdb/sda/g' < /etc/fstab > /media/etc/fstab
# flash the kernel and create the device's keys
chroot /media /etc/init.d/first-run
diff --git a/packages/torouter-prep/src/torouter_preboot.sh b/packages/torouter-prep/src/torouter_preboot.sh
index 70c08aa..267a462 100755
--- a/packages/torouter-prep/src/torouter_preboot.sh
+++ b/packages/torouter-prep/src/torouter_preboot.sh
@@ -16,49 +16,49 @@ export TORADMINGROUP="debian-tor"
# if [ `apt-get --simulate install apt-utils tor torouterui ttdnsd` ]
# Set us to have a default host name and hosts file
-install -o root -g root -m 600 $config_dir/etc/hostname /etc/hostname
-install -o root -g root -m 600 $config_dir/etc/hosts /etc/hosts
+install -o root -g root -m 644 $config_dir/etc/hostname /etc/hostname
+install -o root -g root -m 644 $config_dir/etc/hosts /etc/hosts
# We need to prep apt to understand that we want packages from other repos
-install -o root -g root -m 600 $config_dir/etc/apt/sources.list /etc/apt/sources.list
+install -o root -g root -m 644 $config_dir/etc/apt/sources.list /etc/apt/sources.list
# Reconfigure /etc/inittab here
-install -o root -g root -m 600 $config_dir/etc/inittab /etc/inittab
+install -o root -g root -m 644 $config_dir/etc/inittab /etc/inittab
# Reconfigure fstab
-install -o root -g root -m 600 $config_dir/etc/fstab /etc/fstab
+install -o root -g root -m 644 $config_dir/etc/fstab /etc/fstab
# Configure the network
# eth0 is our "internet" interface with a dhcp client
-install -o root -g root -m 600 $config_dir/etc/network/interfaces /etc/network/interfaces
+install -o root -g root -m 644 $config_dir/etc/network/interfaces /etc/network/interfaces
# Configure dnsmasq
-install -o root -g root -m 600 $config_dir/etc/dnsmasq.conf /etc/dnsmasq.conf
-install -o root -g root -m 600 $config_dir/etc/dnsmasq_lan.conf /etc/dnsmasq_lan.conf
-install -o root -g root -m 600 $config_dir/etc/dnsmasq_wifi.conf /etc/dnsmasq_wifi.conf
+install -o root -g root -m 644 $config_dir/etc/dnsmasq.conf /etc/dnsmasq.conf
+install -o root -g root -m 644 $config_dir/etc/dnsmasq_lan.conf /etc/dnsmasq_lan.conf
+install -o root -g root -m 644 $config_dir/etc/dnsmasq_wifi.conf /etc/dnsmasq_wifi.conf
# new dns scheme
-install -o root -g root -m 600 $config_dir/etc/default/dnsmasq /etc/default/dnsmasq
-install -o root -g root -m 750 $config_dir/etc/init.d/dnsmasq_lan /etc/init.d/dnsmasq_lan
-install -o root -g root -m 750 $config_dir/etc/init.d/dnsmasq_wifi /etc/init.d/dnsmasq_wifi
+install -o root -g root -m 644 $config_dir/etc/default/dnsmasq /etc/default/dnsmasq
+install -o root -g root -m 754 $config_dir/etc/init.d/dnsmasq_lan /etc/init.d/dnsmasq_lan
+install -o root -g root -m 754 $config_dir/etc/init.d/dnsmasq_wifi /etc/init.d/dnsmasq_wifi
# Configure ntp
-install -o root -g root -m 600 $config_dir/etc/ntp.conf /etc/ntp.conf
-install -o root -g root -m 600 $config_dir/etc/default/openntpd /etc/default/openntpd
+install -o root -g root -m 644 $config_dir/etc/ntp.conf /etc/ntp.conf
+install -o root -g root -m 644 $config_dir/etc/default/openntpd /etc/default/openntpd
# Configure ssh
-install -o root -g root -m 600 $config_dir/etc/ssh/sshd_config /etc/ssh/sshd_config
+install -o root -g root -m 644 $config_dir/etc/ssh/sshd_config /etc/ssh/sshd_config
# XXX We should configure ufw here
# XXX We should configure denyhosts
# torrc permissions get overwritten below
-install -o root -g root -m 600 $config_dir/etc/tor/torrc /etc/tor/torrc
+install -o root -g root -m 644 $config_dir/etc/tor/torrc /etc/tor/torrc
-install -o root -g root -m 600 $config_dir/etc/default/ttdnsd /etc/default/ttdnsd
+install -o root -g root -m 644 $config_dir/etc/default/ttdnsd /etc/default/ttdnsd
# install tor firewall helper
-install -o root -g root -m 750 $config_dir/sbin/tor-wireless-firewall.sh /usr/sbin/
+install -o root -g root -m 754 $config_dir/sbin/tor-wireless-firewall.sh /usr/sbin/
# Remove a bunch of stuff
apt-get -f -y remove --purge polipo minissdpd
@@ -70,7 +70,7 @@ apt-get install -f
apt-get -y clean
## Disable ipv6 support for now
-install -o root -g root -m 600 $config_dir/etc/modprobe.d/blacklist.conf /etc/modprobe.d/blacklist.conf
+install -o root -g root -m 644 $config_dir/etc/modprobe.d/blacklist.conf /etc/modprobe.d/blacklist.conf
## add users and groups (ignore failures if groups already exist)
addgroup $ADMINGROUP