# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary (upstream) network interface
allow-hotplug eth0
iface eth0 inet dhcp
	post-up ifup uap0
	post-down ifdown uap0

# The LAN network interface (not tor-ified)
allow-hotplug eth1
iface eth1 inet static
	address 10.23.42.1
	netmask 255.255.255.0
	network 10.23.42.0
	broadcast 10.23.42.255
	pre-up ip addr del 10.23.42.1/24 dev eth1 || true
	post-up echo 1 > /proc/sys/net/ipv4/ip_forward
	post-up /etc/init.d/dnsmasq_lan start
	# this must happen after have brought up uap0 because it clears the NAT
	# tables
	post-up iptables -t nat -A POSTROUTING -s 10.23.42.0/24 -o eth0 -j MASQUERADE
	pre-down /etc/init.d/dnsmasq_lan stop

# The magic Tor wireless network
# *NOT* auto; gets configured by eth0 post-*
iface uap0 inet static
	address 172.16.23.1
	netmask 255.255.255.0
	network 172.16.23.0
	broadcast 172.16.23.255
	pre-up ifconfig uap0 hw ether 00:66:66:66:66:66
	pre-up ip addr del 172.16.23.1/24 dev uap0 || true
	post-up /etc/init.d/tor start
	post-up /etc/init.d/tor reload
	post-up /etc/init.d/dnsmasq_wifi start
	post-up /etc/init.d/ttdnsd restart
	post-up /usr/bin/uaputl sys_cfg_ssid "torproject" || true
	post-up /usr/bin/uaputl bss_start || true
	post-up /usr/sbin/tor-wireless-firewall.sh || true
	post-up /sbin/iptables -t nat -A OUTPUT -p tcp -d 10.192.0.0/10 -j REDIRECT --to-ports 9040 
	pre-down /usr/bin/uaputl bss_stop || true
	pre-down /etc/init.d/dnsmasq_wifi stop