import conf from old torouter repository

1 files changed, 290 insertions, 0 deletions

diff --git a/config/includes.chroot/etc/init.d/dnsmasq_lan b/config/includes.chroot/etc/init.d/dnsmasq_lan
new file mode 100755
index 0000000..22f2557
--- /dev/null
+++ b/config/includes.chroot/etc/init.d/dnsmasq_lan
@@ -0,0 +1,290 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:       dnsmasq_lan
+# Required-Start: $network $remote_fs $syslog
+# Required-Stop:  $network $remote_fs $syslog
+# Default-Start:  2 3 4 5
+# Default-Stop:   0 1 6
+# Description:    DHCP and DNS server
+### END INIT INFO
+
+set +e   # Don't exit on error status
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/dnsmasq
+NAME=dnsmasq_lan
+DESC="DNS forwarder and DHCP server"
+
+# Most configuration options in /etc/default/dnsmasq are deprecated
+# but still honoured.
+ENABLED=1
+if [ -r /etc/default/$NAME ]; then
+	. /etc/default/$NAME
+fi
+
+# Get the system locale, so that messages are in the correct language, and the 
+# charset for IDN is correct
+if [ -r /etc/default/locale ]; then
+        . /etc/default/locale
+        export LANG
+fi
+
+test -x $DAEMON || exit 0
+
+# Provide skeleton LSB log functions for backports which don't have LSB functions.
+if [ -f /lib/lsb/init-functions ]; then
+         . /lib/lsb/init-functions
+else
+         log_warning_msg () {
+            echo "${@}."
+         }
+
+         log_success_msg () {
+            echo "${@}."
+         }
+
+         log_daemon_msg () {
+            echo -n "${1}: $2"
+         }
+
+	 log_end_msg () {
+            if [ $1 -eq 0 ]; then
+              echo "."
+            elif [ $1 -eq 255 ]; then
+              /bin/echo -e " (warning)."
+            else
+              /bin/echo -e " failed!"
+            fi
+         }
+fi
+
+# RESOLV_CONF:
+# If the resolvconf package is installed then use the resolv conf file
+# that it provides as the default.  Otherwise use /etc/resolv.conf as
+# the default.
+#
+# If IGNORE_RESOLVCONF is set in /etc/default/dnsmasq or an explicit
+# filename is set there then this inhibits the use of the resolvconf-provided
+# information.
+#
+# Note that if the resolvconf package is installed it is not possible to 
+# override it just by configuration in /etc/dnsmasq.conf, it is necessary
+# to set IGNORE_RESOLVCONF=yes in /etc/default/dnsmasq.
+
+if [ ! "$RESOLV_CONF" ] &&
+   [ "$IGNORE_RESOLVCONF" != "yes" ] &&
+   [ -x /sbin/resolvconf ]
+then
+	RESOLV_CONF=/var/run/dnsmasq/resolv.conf
+fi
+
+for INTERFACE in $DNSMASQ_INTERFACE; do
+	DNSMASQ_INTERFACES="$DNSMASQ_INTERFACES -i $INTERFACE"
+done
+
+for INTERFACE in $DNSMASQ_EXCEPT; do
+	DNSMASQ_INTERFACES="$DNSMASQ_INTERFACES -I $INTERFACE"
+done
+
+if [ ! "$DNSMASQ_USER" ]; then
+   DNSMASQ_USER="dnsmasq"
+fi
+
+start()
+{
+        # Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+
+        # /var/run may be volatile, so we need to ensure that
+        # /var/run/dnsmasq exists here as well as in postinst
+        if [ ! -d /var/run/dnsmasq ]; then
+           mkdir /var/run/dnsmasq || return 2
+           chown dnsmasq:nogroup /var/run/dnsmasq || return 2
+        fi
+
+	start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON --test -- -C /etc/dnsmasq_lan.conf > /dev/null || return 1
+	start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON -- -C /etc/dnsmasq_lan.conf \
+		-x /var/run/dnsmasq/$NAME.pid \
+	        ${MAILHOSTNAME:+ -m $MAILHOSTNAME} \
+		${MAILTARGET:+ -t $MAILTARGET} \
+		${DNSMASQ_USER:+ -u $DNSMASQ_USER} \
+		${DNSMASQ_INTERFACES:+ $DNSMASQ_INTERFACES} \
+		${DHCP_LEASE:+ -l $DHCP_LEASE} \
+		${DOMAIN_SUFFIX:+ -s $DOMAIN_SUFFIX} \
+		${RESOLV_CONF:+ -r $RESOLV_CONF} \
+		${CACHESIZE:+ -c $CACHESIZE} \
+	        ${CONFIG_DIR:+ -7 $CONFIG_DIR} \
+		${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} \
+		|| return 2
+}
+
+start_resolvconf()
+{
+# If interface "lo" is explicitly disabled in /etc/default/dnsmasq
+# Then dnsmasq won't be providing local DNS, so don't add it to
+# the resolvconf server set.
+	for interface in $DNSMASQ_EXCEPT
+	do
+		[ $interface = lo ] && return
+	done
+
+        if [ -x /sbin/resolvconf ] ; then
+		echo "nameserver 127.0.0.1" | /sbin/resolvconf -a lo.$NAME
+	fi
+	return 0
+}
+
+stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile /var/run/dnsmasq/$NAME.pid
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	return "$RETVAL"
+}
+
+stop_resolvconf()
+{
+	if [ -x /sbin/resolvconf ] ; then
+		/sbin/resolvconf -d lo.$NAME
+	fi
+	return 0
+}
+
+status()
+{
+	# Return
+	#   0 if daemon is running
+	#   1 if daemon is dead and pid file exists
+	#   3 if daemon is not running
+	#   4 if daemon status is unknown
+	start-stop-daemon --start --quiet --pidfile /var/run/dnsmasq/$NAME.pid --exec $DAEMON --test > /dev/null
+	case "$?" in
+		0) [ -e "/var/run/dnsmasq/$NAME.pid" ] && return 1 ; return 3 ;;
+		1) return 0 ;;
+		*) return 4 ;;
+	esac
+}
+
+case "$1" in
+  start)
+	test "$ENABLED" != "0" || exit 0
+	log_daemon_msg "Starting $DESC" "$NAME"
+	start
+	case "$?" in
+		0)
+			log_end_msg 0
+			start_resolvconf
+			exit 0
+			;;
+		1)
+			log_success_msg "(already running)"
+			exit 0
+			;;
+		*)
+			log_end_msg 1
+			exit 1
+			;;
+	esac
+	;;
+  stop)
+	stop_resolvconf
+	if [ "$ENABLED" != "0" ]; then
+             log_daemon_msg "Stopping $DESC" "$NAME"
+	fi
+	stop
+        RETVAL="$?"
+	if [ "$ENABLED" = "0" ]; then
+	    case "$RETVAL" in
+	       0) log_daemon_msg "Stopping $DESC" "$NAME"; log_end_msg 0 ;;
+            esac 
+	    exit 0
+	fi
+	case "$RETVAL" in
+		0) log_end_msg 0 ; exit 0 ;;
+		1) log_warning_msg "(not running)" ; exit 0 ;;
+		*) log_end_msg 1; exit 1 ;;
+	esac
+	;;
+  restart|force-reload)
+	test "$ENABLED" != "0" || exit 1
+	$DAEMON --test ${CONFIG_DIR:+ -7 $CONFIG_DIR} ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+	    NAME="configuration syntax check"
+	    RETVAL="2"
+	else   
+	    stop_resolvconf
+	    stop
+	    RETVAL="$?"
+        fi
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	case "$RETVAL" in
+		0|1)
+		        sleep 2
+			start
+			case "$?" in
+				0)
+					log_end_msg 0
+					start_resolvconf
+					exit 0
+					;;
+			        *)
+					log_end_msg 1
+					exit 1
+					;;
+			esac
+			;;
+		*)
+			log_end_msg 1
+			exit 1
+			;;
+	esac
+	;;
+  status)
+	log_daemon_msg "Checking $DESC" "$NAME"
+	status
+	case "$?" in
+		0) log_success_msg "(running)" ; exit 0 ;;
+		1) log_success_msg "(dead, pid file exists)" ; exit 1 ;;
+		3) log_success_msg "(not running)" ; exit 3 ;;
+		*) log_success_msg "(unknown)" ; exit 4 ;;
+	esac
+	;;
+  dump-stats)
+        kill -s USR1 `cat /var/run/dnsmasq/$NAME.pid`
+	;;
+  systemd-start-resolvconf)
+	start_resolvconf
+	;;
+  systemd-stop-resolvconf)
+	stop_resolvconf
+	;;
+  systemd-exec)
+#  --pid-file without argument disables writing a PIDfile, we don't need one with sytemd.
+# Enable DBus by default because we use DBus activation with systemd.
+	exec $DAEMON --keep-in-foreground --pid-file --enable-dbus \
+	    ${MAILHOSTNAME:+ -m $MAILHOSTNAME} \
+	    ${MAILTARGET:+ -t $MAILTARGET} \
+	    ${DNSMASQ_USER:+ -u $DNSMASQ_USER} \
+	    ${DNSMASQ_INTERFACES:+ $DNSMASQ_INTERFACES} \
+	    ${DHCP_LEASE:+ -l $DHCP_LEASE} \
+	    ${DOMAIN_SUFFIX:+ -s $DOMAIN_SUFFIX} \
+	    ${RESOLV_CONF:+ -r $RESOLV_CONF} \
+	    ${CACHESIZE:+ -c $CACHESIZE} \
+	    ${CONFIG_DIR:+ -7 $CONFIG_DIR} \
+	    ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} 
+	;;
+  *)
+	echo "Usage: /etc/init.d/$NAME {start|stop|restart|force-reload|dump-stats|status}" >&2
+	exit 3
+	;;
+esac
+
+exit 0
+