From 6bf20c78f5b69d40bcc4931df93d29198435ab67 Mon Sep 17 00:00:00 2001 From: zakk Date: Fri, 26 Aug 2005 17:39:27 +0000 Subject: newlines fixed git-svn-id: svn://svn.icculus.org/quake3/trunk@6 edf5b092-35ff-0310-97b2-ce42778d08ea --- libs/cmdlib.h | 150 +- libs/cmdlib/cmdlib.cpp | 1100 +++--- libs/cmdlib/cmdlib.vcproj | 312 +- libs/jpeg6/jchuff.h | 68 +- libs/jpeg6/jcomapi.cpp | 188 +- libs/jpeg6/jconfig.h | 82 +- libs/jpeg6/jdapimin.cpp | 800 ++-- libs/jpeg6/jdapistd.cpp | 550 +-- libs/jpeg6/jdatasrc.cpp | 408 +- libs/jpeg6/jdcoefct.cpp | 1450 ++++---- libs/jpeg6/jdcolor.cpp | 734 ++-- libs/jpeg6/jdct.h | 352 +- libs/jpeg6/jddctmgr.cpp | 540 +-- libs/jpeg6/jdhuff.cpp | 1148 +++--- libs/jpeg6/jdhuff.h | 404 +- libs/jpeg6/jdinput.cpp | 762 ++-- libs/jpeg6/jdmainct.cpp | 1024 ++--- libs/jpeg6/jdmarker.cpp | 2104 +++++------ libs/jpeg6/jdmaster.cpp | 1114 +++--- libs/jpeg6/jdpostct.cpp | 580 +-- libs/jpeg6/jdsample.cpp | 956 ++--- libs/jpeg6/jdtrans.cpp | 244 +- libs/jpeg6/jerror.cpp | 462 +-- libs/jpeg6/jerror.h | 546 +-- libs/jpeg6/jfdctflt.cpp | 336 +- libs/jpeg6/jidctflt.cpp | 482 +-- libs/jpeg6/jinclude.h | 182 +- libs/jpeg6/jmemmgr.cpp | 2230 +++++------ libs/jpeg6/jmemnobs.cpp | 206 +- libs/jpeg6/jmemsys.h | 364 +- libs/jpeg6/jmorecfg.h | 692 ++-- libs/jpeg6/jpeg6.vcproj | 1206 +++--- libs/jpeg6/jpegint.h | 776 ++-- libs/jpeg6/jpgload.cpp | 284 +- libs/jpeg6/jutils.cpp | 350 +- libs/jpeg6/jversion.h | 28 +- libs/jpeglib.h | 2174 +++++------ libs/pak/pak.vcproj | 346 +- libs/pak/pakstuff.cpp | 2376 ++++++------ libs/pak/unzip.cpp | 9092 ++++++++++++++++++++++----------------------- libs/pak/unzip.h | 600 +-- libs/pakstuff.h | 240 +- libs/str.h | 384 +- 43 files changed, 19213 insertions(+), 19213 deletions(-) (limited to 'libs') diff --git a/libs/cmdlib.h b/libs/cmdlib.h index 72fba67..9c95d03 100755 --- a/libs/cmdlib.h +++ b/libs/cmdlib.h @@ -19,79 +19,79 @@ along with Foobar; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA =========================================================================== */ -// -// start of shared cmdlib stuff -// - -#ifndef __CMDLIB__ -#define __CMDLIB__ - -#include -#include -#include -#include -#include -#include -#include - -#ifndef __BYTEBOOL__ -#define __BYTEBOOL__ - -#ifndef __cplusplus - typedef enum {false, true} boolean; -#else - typedef unsigned char boolean; -#endif - - -typedef unsigned char byte; -//typedef unsigned char byte; -#endif - -FILE *SafeOpenWrite (const char *filename); -FILE *SafeOpenRead (const char *filename); -void SafeRead (FILE *f, void *buffer, int count); -void SafeWrite (FILE *f, const void *buffer, int count); -int LoadFile (const char *filename, void **bufferptr); -int LoadFileNoCrash (const char *filename, void **bufferptr); -void SaveFile (const char *filename, void *buffer, int count); -void DefaultExtension (char *path, char *extension); -void DefaultPath (char *path, char *basepath); -void StripFilename (char *path); -void StripExtension (char *path); -void ExtractFilePath (const char *path, char *dest); -void ExtractFileName (const char *path, char *dest); -void ExtractFileBase (const char *path, char *dest); -void ExtractFileExtension (const char *path, char *dest); -short BigShort (short l); -short LittleShort (short l); -int BigLong (int l); -int LittleLong (int l); -float BigFloat (float l); -float LittleFloat (float l); -void *qmalloc (size_t size); -void* qblockmalloc(size_t nSize); - - - -// error and printf functions -typedef void (PFN_ERR)(const char *pFormat, ...); -typedef void (PFN_PRINTF)(const char *pFormat, ...); -typedef void (PFN_ERR_NUM)(int nNum, const char *pFormat, ...); -typedef void (PFN_PRINTF_NUM)(int nNum, const char *pFormat, ...); - -void Error(const char *pFormat, ...); -void Printf(const char *pFormat, ...); -void ErrorNum(int n, const char *pFormat, ...); -void PrintfNum(int n, const char *pFormat, ...); - -void SetErrorHandler(PFN_ERR pe); -void SetPrintfHandler(PFN_PRINTF pe); -void SetErrorHandlerNum(PFN_ERR_NUM pe); -void SetPrintfHandlerNum(PFN_PRINTF_NUM pe); -void ConvertDOSToUnixName( char *dst, const char *src ); -char* StrDup(char* pStr); -char* StrDup(const char* pStr); - - +// +// start of shared cmdlib stuff +// + +#ifndef __CMDLIB__ +#define __CMDLIB__ + +#include +#include +#include +#include +#include +#include +#include + +#ifndef __BYTEBOOL__ +#define __BYTEBOOL__ + +#ifndef __cplusplus + typedef enum {false, true} boolean; +#else + typedef unsigned char boolean; +#endif + + +typedef unsigned char byte; +//typedef unsigned char byte; +#endif + +FILE *SafeOpenWrite (const char *filename); +FILE *SafeOpenRead (const char *filename); +void SafeRead (FILE *f, void *buffer, int count); +void SafeWrite (FILE *f, const void *buffer, int count); +int LoadFile (const char *filename, void **bufferptr); +int LoadFileNoCrash (const char *filename, void **bufferptr); +void SaveFile (const char *filename, void *buffer, int count); +void DefaultExtension (char *path, char *extension); +void DefaultPath (char *path, char *basepath); +void StripFilename (char *path); +void StripExtension (char *path); +void ExtractFilePath (const char *path, char *dest); +void ExtractFileName (const char *path, char *dest); +void ExtractFileBase (const char *path, char *dest); +void ExtractFileExtension (const char *path, char *dest); +short BigShort (short l); +short LittleShort (short l); +int BigLong (int l); +int LittleLong (int l); +float BigFloat (float l); +float LittleFloat (float l); +void *qmalloc (size_t size); +void* qblockmalloc(size_t nSize); + + + +// error and printf functions +typedef void (PFN_ERR)(const char *pFormat, ...); +typedef void (PFN_PRINTF)(const char *pFormat, ...); +typedef void (PFN_ERR_NUM)(int nNum, const char *pFormat, ...); +typedef void (PFN_PRINTF_NUM)(int nNum, const char *pFormat, ...); + +void Error(const char *pFormat, ...); +void Printf(const char *pFormat, ...); +void ErrorNum(int n, const char *pFormat, ...); +void PrintfNum(int n, const char *pFormat, ...); + +void SetErrorHandler(PFN_ERR pe); +void SetPrintfHandler(PFN_PRINTF pe); +void SetErrorHandlerNum(PFN_ERR_NUM pe); +void SetPrintfHandlerNum(PFN_PRINTF_NUM pe); +void ConvertDOSToUnixName( char *dst, const char *src ); +char* StrDup(char* pStr); +char* StrDup(const char* pStr); + + #endif \ No newline at end of file diff --git a/libs/cmdlib/cmdlib.cpp b/libs/cmdlib/cmdlib.cpp index c1e9d8b..15cf3f6 100755 --- a/libs/cmdlib/cmdlib.cpp +++ b/libs/cmdlib/cmdlib.cpp @@ -1,550 +1,550 @@ -// -// start of shared cmdlib stuff -// - - -#include "cmdlib.h" -#include "windows.h" - -#define PATHSEPERATOR '/' - -// rad additions -// 11.29.99 -PFN_ERR *g_pfnError = NULL; -PFN_PRINTF *g_pfnPrintf = NULL; -PFN_ERR_NUM *g_pfnErrorNum = NULL; -PFN_PRINTF_NUM *g_pfnPrintfNum = NULL; - - -void Error(const char *pFormat, ...) -{ - if (g_pfnError) - { - va_list arg_ptr; - va_start(arg_ptr, pFormat); - g_pfnError(pFormat, arg_ptr); - va_end(arg_ptr); - } -} - -void Printf(const char *pFormat, ...) -{ - if (g_pfnPrintf) - { - va_list arg_ptr; - va_start(arg_ptr, pFormat); - g_pfnPrintf(pFormat, arg_ptr); - va_end(arg_ptr); - } -} - -void ErrorNum(int nErr, const char *pFormat, ...) -{ - if (g_pfnErrorNum) - { - va_list arg_ptr; - va_start(arg_ptr, pFormat); - g_pfnErrorNum(nErr, pFormat, arg_ptr); - va_end(arg_ptr); - } -} - -void PrintfNum(int nErr, const char *pFormat, ...) -{ - if (g_pfnPrintfNum) - { - va_list arg_ptr; - va_start(arg_ptr, pFormat); - g_pfnPrintfNum(nErr, pFormat, arg_ptr); - va_end(arg_ptr); - } -} - - - -void SetErrorHandler(PFN_ERR pe) -{ - g_pfnError = pe; -} - -void SetPrintfHandler(PFN_PRINTF pe) -{ - g_pfnPrintf = pe; -} - -void SetErrorHandlerNum(PFN_ERR_NUM pe) -{ - g_pfnErrorNum = pe; -} - -void SetPrintfHandler(PFN_PRINTF_NUM pe) -{ - g_pfnPrintfNum = pe; -} - - - -// rad end - -#define MEM_BLOCKSIZE 4096 -void* qblockmalloc(size_t nSize) -{ - void *b; - // round up to threshold - int nAllocSize = nSize % MEM_BLOCKSIZE; - if ( nAllocSize > 0) - { - nSize += MEM_BLOCKSIZE - nAllocSize; - } - b = malloc(nSize + 1); - memset (b, 0, nSize); - return b; -} - -void* qmalloc (size_t nSize) -{ - void *b; - b = malloc(nSize + 1); - memset (b, 0, nSize); - return b; -} - -/* -================ -Q_filelength -================ -*/ -int Q_filelength (FILE *f) -{ - int pos; - int end; - - pos = ftell (f); - fseek (f, 0, SEEK_END); - end = ftell (f); - fseek (f, pos, SEEK_SET); - - return end; -} - - -// FIXME: need error handler -FILE *SafeOpenWrite (const char *filename) -{ - FILE *f; - - f = fopen(filename, "wb"); - - if (!f) - { - Error ("Error opening %s: %s",filename,strerror(errno)); - } - - return f; -} - -FILE *SafeOpenRead (const char *filename) -{ - FILE *f; - - f = fopen(filename, "rb"); - - if (!f) - { - Error ("Error opening %s: %s",filename,strerror(errno)); - } - - return f; -} - - -void SafeRead (FILE *f, void *buffer, int count) -{ - if ( (int)fread (buffer, 1, count, f) != count) - Error ("File read failure"); -} - - -void SafeWrite (FILE *f, const void *buffer, int count) -{ - if ( (int)fwrite (buffer, 1, count, f) != count) - Error ("File read failure"); -} - - - -/* -============== -LoadFile -============== -*/ -int LoadFile (const char *filename, void **bufferptr) -{ - FILE *f; - int length; - void *buffer; - - *bufferptr = NULL; - - if (filename == NULL || strlen(filename) == 0) - { - return -1; - } - - f = fopen (filename, "rb"); - if (!f) - { - return -1; - } - length = Q_filelength (f); - buffer = qblockmalloc (length+1); - ((char *)buffer)[length] = 0; - SafeRead (f, buffer, length); - fclose (f); - - *bufferptr = buffer; - return length; -} - - -/* -============== -LoadFileNoCrash - -returns -1 length if not present -============== -*/ -int LoadFileNoCrash (const char *filename, void **bufferptr) -{ - FILE *f; - int length; - void *buffer; - - f = fopen (filename, "rb"); - if (!f) - return -1; - length = Q_filelength (f); - buffer = qmalloc (length+1); - ((char *)buffer)[length] = 0; - SafeRead (f, buffer, length); - fclose (f); - - *bufferptr = buffer; - return length; -} - - -/* -============== -SaveFile -============== -*/ -void SaveFile (const char *filename, void *buffer, int count) -{ - FILE *f; - - f = SafeOpenWrite (filename); - SafeWrite (f, buffer, count); - fclose (f); -} - - - -void DefaultExtension (char *path, char *extension) -{ - char *src; -// -// if path doesn't have a .EXT, append extension -// (extension should include the .) -// - src = path + strlen(path) - 1; - - while (*src != PATHSEPERATOR && src != path) - { - if (*src == '.') - return; // it has an extension - src--; - } - - strcat (path, extension); -} - - -void DefaultPath (char *path, char *basepath) -{ - char temp[128]; - - if (path[0] == PATHSEPERATOR) - return; // absolute path location - strcpy (temp,path); - strcpy (path,basepath); - strcat (path,temp); -} - - -void StripFilename (char *path) -{ - int length; - - length = strlen(path)-1; - while (length > 0 && path[length] != PATHSEPERATOR) - length--; - path[length] = 0; -} - -void StripExtension (char *path) -{ - int length; - - length = strlen(path)-1; - while (length > 0 && path[length] != '.') - { - length--; - if (path[length] == '/') - return; // no extension - } - if (length) - path[length] = 0; -} - - -/* -==================== -Extract file parts -==================== -*/ -void ExtractFilePath (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a \ or the start -// - while (src != path && *(src-1) != PATHSEPERATOR) - src--; - - memcpy (dest, path, src-path); - dest[src-path] = 0; -} - -void ExtractFileName (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a \ or the start -// - while (src != path && *(src-1) != '/' - && *(src-1) != '\\' ) - src--; - - while (*src) - { - *dest++ = *src++; - } - *dest = 0; -} - -void ExtractFileBase (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a \ or the start -// - while (src != path && *(src-1) != '/' - && *(src-1) != '\\' ) - src--; - - while (*src && *src != '.') - { - *dest++ = *src++; - } - *dest = 0; -} - -void ExtractFileExtension (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a . or the start -// - while (src != path && *(src-1) != '.') - src--; - if (src == path) - { - *dest = 0; // no extension - return; - } - - strcpy (dest,src); -} - - -void ConvertDOSToUnixName( char *dst, const char *src ) -{ - while ( *src ) - { - if ( *src == '\\' ) - *dst = '/'; - else - *dst = *src; - dst++; src++; - } - *dst = 0; -} - - -char* StrDup(char* pStr) -{ - if (pStr) - { - return strcpy(new char[strlen(pStr)+1], pStr); - } - return NULL; -} - -char* StrDup(const char* pStr) -{ - if (pStr) - { - return strcpy(new char[strlen(pStr)+1], pStr); - } - return NULL; -} - - -/* -============================================================================ - - BYTE ORDER FUNCTIONS - -============================================================================ -*/ - -#ifdef _SGI_SOURCE -#define __BIG_ENDIAN__ -#endif - -#ifdef __BIG_ENDIAN__ - -short LittleShort (short l) -{ - byte b1,b2; - - b1 = l&255; - b2 = (l>>8)&255; - - return (b1<<8) + b2; -} - -short BigShort (short l) -{ - return l; -} - - -int LittleLong (int l) -{ - byte b1,b2,b3,b4; - - b1 = l&255; - b2 = (l>>8)&255; - b3 = (l>>16)&255; - b4 = (l>>24)&255; - - return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; -} - -int BigLong (int l) -{ - return l; -} - - -float LittleFloat (float l) -{ - union {byte b[4]; float f;} in, out; - - in.f = l; - out.b[0] = in.b[3]; - out.b[1] = in.b[2]; - out.b[2] = in.b[1]; - out.b[3] = in.b[0]; - - return out.f; -} - -float BigFloat (float l) -{ - return l; -} - - -#else - - -short BigShort (short l) -{ - byte b1,b2; - - b1 = l&255; - b2 = (l>>8)&255; - - return (b1<<8) + b2; -} - -short LittleShort (short l) -{ - return l; -} - - -int BigLong (int l) -{ - byte b1,b2,b3,b4; - - b1 = l&255; - b2 = (l>>8)&255; - b3 = (l>>16)&255; - b4 = (l>>24)&255; - - return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; -} - -int LittleLong (int l) -{ - return l; -} - -float BigFloat (float l) -{ - union {byte b[4]; float f;} in, out; - - in.f = l; - out.b[0] = in.b[3]; - out.b[1] = in.b[2]; - out.b[2] = in.b[1]; - out.b[3] = in.b[0]; - - return out.f; -} - -float LittleFloat (float l) -{ - return l; -} - - - -#endif - +// +// start of shared cmdlib stuff +// + + +#include "cmdlib.h" +#include "windows.h" + +#define PATHSEPERATOR '/' + +// rad additions +// 11.29.99 +PFN_ERR *g_pfnError = NULL; +PFN_PRINTF *g_pfnPrintf = NULL; +PFN_ERR_NUM *g_pfnErrorNum = NULL; +PFN_PRINTF_NUM *g_pfnPrintfNum = NULL; + + +void Error(const char *pFormat, ...) +{ + if (g_pfnError) + { + va_list arg_ptr; + va_start(arg_ptr, pFormat); + g_pfnError(pFormat, arg_ptr); + va_end(arg_ptr); + } +} + +void Printf(const char *pFormat, ...) +{ + if (g_pfnPrintf) + { + va_list arg_ptr; + va_start(arg_ptr, pFormat); + g_pfnPrintf(pFormat, arg_ptr); + va_end(arg_ptr); + } +} + +void ErrorNum(int nErr, const char *pFormat, ...) +{ + if (g_pfnErrorNum) + { + va_list arg_ptr; + va_start(arg_ptr, pFormat); + g_pfnErrorNum(nErr, pFormat, arg_ptr); + va_end(arg_ptr); + } +} + +void PrintfNum(int nErr, const char *pFormat, ...) +{ + if (g_pfnPrintfNum) + { + va_list arg_ptr; + va_start(arg_ptr, pFormat); + g_pfnPrintfNum(nErr, pFormat, arg_ptr); + va_end(arg_ptr); + } +} + + + +void SetErrorHandler(PFN_ERR pe) +{ + g_pfnError = pe; +} + +void SetPrintfHandler(PFN_PRINTF pe) +{ + g_pfnPrintf = pe; +} + +void SetErrorHandlerNum(PFN_ERR_NUM pe) +{ + g_pfnErrorNum = pe; +} + +void SetPrintfHandler(PFN_PRINTF_NUM pe) +{ + g_pfnPrintfNum = pe; +} + + + +// rad end + +#define MEM_BLOCKSIZE 4096 +void* qblockmalloc(size_t nSize) +{ + void *b; + // round up to threshold + int nAllocSize = nSize % MEM_BLOCKSIZE; + if ( nAllocSize > 0) + { + nSize += MEM_BLOCKSIZE - nAllocSize; + } + b = malloc(nSize + 1); + memset (b, 0, nSize); + return b; +} + +void* qmalloc (size_t nSize) +{ + void *b; + b = malloc(nSize + 1); + memset (b, 0, nSize); + return b; +} + +/* +================ +Q_filelength +================ +*/ +int Q_filelength (FILE *f) +{ + int pos; + int end; + + pos = ftell (f); + fseek (f, 0, SEEK_END); + end = ftell (f); + fseek (f, pos, SEEK_SET); + + return end; +} + + +// FIXME: need error handler +FILE *SafeOpenWrite (const char *filename) +{ + FILE *f; + + f = fopen(filename, "wb"); + + if (!f) + { + Error ("Error opening %s: %s",filename,strerror(errno)); + } + + return f; +} + +FILE *SafeOpenRead (const char *filename) +{ + FILE *f; + + f = fopen(filename, "rb"); + + if (!f) + { + Error ("Error opening %s: %s",filename,strerror(errno)); + } + + return f; +} + + +void SafeRead (FILE *f, void *buffer, int count) +{ + if ( (int)fread (buffer, 1, count, f) != count) + Error ("File read failure"); +} + + +void SafeWrite (FILE *f, const void *buffer, int count) +{ + if ( (int)fwrite (buffer, 1, count, f) != count) + Error ("File read failure"); +} + + + +/* +============== +LoadFile +============== +*/ +int LoadFile (const char *filename, void **bufferptr) +{ + FILE *f; + int length; + void *buffer; + + *bufferptr = NULL; + + if (filename == NULL || strlen(filename) == 0) + { + return -1; + } + + f = fopen (filename, "rb"); + if (!f) + { + return -1; + } + length = Q_filelength (f); + buffer = qblockmalloc (length+1); + ((char *)buffer)[length] = 0; + SafeRead (f, buffer, length); + fclose (f); + + *bufferptr = buffer; + return length; +} + + +/* +============== +LoadFileNoCrash + +returns -1 length if not present +============== +*/ +int LoadFileNoCrash (const char *filename, void **bufferptr) +{ + FILE *f; + int length; + void *buffer; + + f = fopen (filename, "rb"); + if (!f) + return -1; + length = Q_filelength (f); + buffer = qmalloc (length+1); + ((char *)buffer)[length] = 0; + SafeRead (f, buffer, length); + fclose (f); + + *bufferptr = buffer; + return length; +} + + +/* +============== +SaveFile +============== +*/ +void SaveFile (const char *filename, void *buffer, int count) +{ + FILE *f; + + f = SafeOpenWrite (filename); + SafeWrite (f, buffer, count); + fclose (f); +} + + + +void DefaultExtension (char *path, char *extension) +{ + char *src; +// +// if path doesn't have a .EXT, append extension +// (extension should include the .) +// + src = path + strlen(path) - 1; + + while (*src != PATHSEPERATOR && src != path) + { + if (*src == '.') + return; // it has an extension + src--; + } + + strcat (path, extension); +} + + +void DefaultPath (char *path, char *basepath) +{ + char temp[128]; + + if (path[0] == PATHSEPERATOR) + return; // absolute path location + strcpy (temp,path); + strcpy (path,basepath); + strcat (path,temp); +} + + +void StripFilename (char *path) +{ + int length; + + length = strlen(path)-1; + while (length > 0 && path[length] != PATHSEPERATOR) + length--; + path[length] = 0; +} + +void StripExtension (char *path) +{ + int length; + + length = strlen(path)-1; + while (length > 0 && path[length] != '.') + { + length--; + if (path[length] == '/') + return; // no extension + } + if (length) + path[length] = 0; +} + + +/* +==================== +Extract file parts +==================== +*/ +void ExtractFilePath (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a \ or the start +// + while (src != path && *(src-1) != PATHSEPERATOR) + src--; + + memcpy (dest, path, src-path); + dest[src-path] = 0; +} + +void ExtractFileName (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a \ or the start +// + while (src != path && *(src-1) != '/' + && *(src-1) != '\\' ) + src--; + + while (*src) + { + *dest++ = *src++; + } + *dest = 0; +} + +void ExtractFileBase (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a \ or the start +// + while (src != path && *(src-1) != '/' + && *(src-1) != '\\' ) + src--; + + while (*src && *src != '.') + { + *dest++ = *src++; + } + *dest = 0; +} + +void ExtractFileExtension (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a . or the start +// + while (src != path && *(src-1) != '.') + src--; + if (src == path) + { + *dest = 0; // no extension + return; + } + + strcpy (dest,src); +} + + +void ConvertDOSToUnixName( char *dst, const char *src ) +{ + while ( *src ) + { + if ( *src == '\\' ) + *dst = '/'; + else + *dst = *src; + dst++; src++; + } + *dst = 0; +} + + +char* StrDup(char* pStr) +{ + if (pStr) + { + return strcpy(new char[strlen(pStr)+1], pStr); + } + return NULL; +} + +char* StrDup(const char* pStr) +{ + if (pStr) + { + return strcpy(new char[strlen(pStr)+1], pStr); + } + return NULL; +} + + +/* +============================================================================ + + BYTE ORDER FUNCTIONS + +============================================================================ +*/ + +#ifdef _SGI_SOURCE +#define __BIG_ENDIAN__ +#endif + +#ifdef __BIG_ENDIAN__ + +short LittleShort (short l) +{ + byte b1,b2; + + b1 = l&255; + b2 = (l>>8)&255; + + return (b1<<8) + b2; +} + +short BigShort (short l) +{ + return l; +} + + +int LittleLong (int l) +{ + byte b1,b2,b3,b4; + + b1 = l&255; + b2 = (l>>8)&255; + b3 = (l>>16)&255; + b4 = (l>>24)&255; + + return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; +} + +int BigLong (int l) +{ + return l; +} + + +float LittleFloat (float l) +{ + union {byte b[4]; float f;} in, out; + + in.f = l; + out.b[0] = in.b[3]; + out.b[1] = in.b[2]; + out.b[2] = in.b[1]; + out.b[3] = in.b[0]; + + return out.f; +} + +float BigFloat (float l) +{ + return l; +} + + +#else + + +short BigShort (short l) +{ + byte b1,b2; + + b1 = l&255; + b2 = (l>>8)&255; + + return (b1<<8) + b2; +} + +short LittleShort (short l) +{ + return l; +} + + +int BigLong (int l) +{ + byte b1,b2,b3,b4; + + b1 = l&255; + b2 = (l>>8)&255; + b3 = (l>>16)&255; + b4 = (l>>24)&255; + + return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; +} + +int LittleLong (int l) +{ + return l; +} + +float BigFloat (float l) +{ + union {byte b[4]; float f;} in, out; + + in.f = l; + out.b[0] = in.b[3]; + out.b[1] = in.b[2]; + out.b[2] = in.b[1]; + out.b[3] = in.b[0]; + + return out.f; +} + +float LittleFloat (float l) +{ + return l; +} + + + +#endif + diff --git a/libs/cmdlib/cmdlib.vcproj b/libs/cmdlib/cmdlib.vcproj index f471b07..b5a58d8 100755 --- a/libs/cmdlib/cmdlib.vcproj +++ b/libs/cmdlib/cmdlib.vcproj @@ -1,156 +1,156 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/libs/jpeg6/jchuff.h b/libs/jpeg6/jchuff.h index 0a81d54..f43d571 100755 --- a/libs/jpeg6/jchuff.h +++ b/libs/jpeg6/jchuff.h @@ -1,34 +1,34 @@ -/* - * jchuff.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy encoding routines - * that are shared between the sequential encoder (jchuff.c) and the - * progressive encoder (jcphuff.c). No other modules need to see these. - */ - -/* Derived data constructed for each Huffman table */ - -typedef struct { - unsigned int ehufco[256]; /* code for each symbol */ - char ehufsi[256]; /* length of code for each symbol */ - /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ -} c_derived_tbl; - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_c_derived_tbl jMkCDerived -#define jpeg_gen_optimal_table jGenOptTbl -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Expand a Huffman table definition into the derived format */ -EXTERN void jpeg_make_c_derived_tbl JPP((j_compress_ptr cinfo, - JHUFF_TBL * htbl, c_derived_tbl ** pdtbl)); - -/* Generate an optimal table definition given the specified counts */ -EXTERN void jpeg_gen_optimal_table JPP((j_compress_ptr cinfo, - JHUFF_TBL * htbl, long freq[])); +/* + * jchuff.h + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for Huffman entropy encoding routines + * that are shared between the sequential encoder (jchuff.c) and the + * progressive encoder (jcphuff.c). No other modules need to see these. + */ + +/* Derived data constructed for each Huffman table */ + +typedef struct { + unsigned int ehufco[256]; /* code for each symbol */ + char ehufsi[256]; /* length of code for each symbol */ + /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ +} c_derived_tbl; + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_make_c_derived_tbl jMkCDerived +#define jpeg_gen_optimal_table jGenOptTbl +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Expand a Huffman table definition into the derived format */ +EXTERN void jpeg_make_c_derived_tbl JPP((j_compress_ptr cinfo, + JHUFF_TBL * htbl, c_derived_tbl ** pdtbl)); + +/* Generate an optimal table definition given the specified counts */ +EXTERN void jpeg_gen_optimal_table JPP((j_compress_ptr cinfo, + JHUFF_TBL * htbl, long freq[])); diff --git a/libs/jpeg6/jcomapi.cpp b/libs/jpeg6/jcomapi.cpp index 8f417c0..c10903f 100755 --- a/libs/jpeg6/jcomapi.cpp +++ b/libs/jpeg6/jcomapi.cpp @@ -1,94 +1,94 @@ -/* - * jcomapi.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface routines that are used for both - * compression and decompression. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Abort processing of a JPEG compression or decompression operation, - * but don't destroy the object itself. - * - * For this, we merely clean up all the nonpermanent memory pools. - * Note that temp files (virtual arrays) are not allowed to belong to - * the permanent pool, so we will be able to close all temp files here. - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL void -jpeg_abort (j_common_ptr cinfo) -{ - int pool; - - /* Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { - (*cinfo->mem->free_pool) (cinfo, pool); - } - - /* Reset overall state for possible reuse of object */ - cinfo->global_state = (cinfo->is_decompressor ? DSTATE_START : CSTATE_START); -} - - -/* - * Destruction of a JPEG object. - * - * Everything gets deallocated except the master jpeg_compress_struct itself - * and the error manager struct. Both of these are supplied by the application - * and must be freed, if necessary, by the application. (Often they are on - * the stack and so don't need to be freed anyway.) - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL void -jpeg_destroy (j_common_ptr cinfo) -{ - /* We need only tell the memory manager to release everything. */ - /* NB: mem pointer is NULL if memory mgr failed to initialize. */ - if (cinfo->mem != NULL) - (*cinfo->mem->self_destruct) (cinfo); - cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ - cinfo->global_state = 0; /* mark it destroyed */ -} - - -/* - * Convenience routines for allocating quantization and Huffman tables. - * (Would jutils.c be a more reasonable place to put these?) - */ - -GLOBAL JQUANT_TBL * -jpeg_alloc_quant_table (j_common_ptr cinfo) -{ - JQUANT_TBL *tbl; - - tbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} - - -GLOBAL JHUFF_TBL * -jpeg_alloc_huff_table (j_common_ptr cinfo) -{ - JHUFF_TBL *tbl; - - tbl = (JHUFF_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} +/* + * jcomapi.c + * + * Copyright (C) 1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface routines that are used for both + * compression and decompression. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Abort processing of a JPEG compression or decompression operation, + * but don't destroy the object itself. + * + * For this, we merely clean up all the nonpermanent memory pools. + * Note that temp files (virtual arrays) are not allowed to belong to + * the permanent pool, so we will be able to close all temp files here. + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL void +jpeg_abort (j_common_ptr cinfo) +{ + int pool; + + /* Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { + (*cinfo->mem->free_pool) (cinfo, pool); + } + + /* Reset overall state for possible reuse of object */ + cinfo->global_state = (cinfo->is_decompressor ? DSTATE_START : CSTATE_START); +} + + +/* + * Destruction of a JPEG object. + * + * Everything gets deallocated except the master jpeg_compress_struct itself + * and the error manager struct. Both of these are supplied by the application + * and must be freed, if necessary, by the application. (Often they are on + * the stack and so don't need to be freed anyway.) + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL void +jpeg_destroy (j_common_ptr cinfo) +{ + /* We need only tell the memory manager to release everything. */ + /* NB: mem pointer is NULL if memory mgr failed to initialize. */ + if (cinfo->mem != NULL) + (*cinfo->mem->self_destruct) (cinfo); + cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ + cinfo->global_state = 0; /* mark it destroyed */ +} + + +/* + * Convenience routines for allocating quantization and Huffman tables. + * (Would jutils.c be a more reasonable place to put these?) + */ + +GLOBAL JQUANT_TBL * +jpeg_alloc_quant_table (j_common_ptr cinfo) +{ + JQUANT_TBL *tbl; + + tbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +GLOBAL JHUFF_TBL * +jpeg_alloc_huff_table (j_common_ptr cinfo) +{ + JHUFF_TBL *tbl; + + tbl = (JHUFF_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} diff --git a/libs/jpeg6/jconfig.h b/libs/jpeg6/jconfig.h index 187ecfc..7d2f733 100755 --- a/libs/jpeg6/jconfig.h +++ b/libs/jpeg6/jconfig.h @@ -1,41 +1,41 @@ -/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#define CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#define JDCT_DEFAULT JDCT_FLOAT -#define JDCT_FASTEST JDCT_FLOAT - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Needed to make one-file style work in Watcom */ -#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ +/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ +/* see jconfig.doc for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#define CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#define JDCT_DEFAULT JDCT_FLOAT +#define JDCT_FASTEST JDCT_FLOAT + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in Watcom */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libs/jpeg6/jdapimin.cpp b/libs/jpeg6/jdapimin.cpp index 1bae6a2..1ea7ef1 100755 --- a/libs/jpeg6/jdapimin.cpp +++ b/libs/jpeg6/jdapimin.cpp @@ -1,400 +1,400 @@ -/* - * jdapimin.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-decompression case or the - * transcoding-only case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jdapistd.c. But also see jcomapi.c for routines - * shared by compression and decompression, and jdtrans.c for the transcoding - * case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG decompression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL void -jpeg_create_decompress (j_decompress_ptr cinfo) -{ - int i; - - /* For debugging purposes, zero the whole master structure. - * But error manager pointer is already there, so save and restore it. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - i = sizeof(struct jpeg_decompress_struct); - i = SIZEOF(struct jpeg_decompress_struct); - MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); - cinfo->err = err; - } - cinfo->is_decompressor = TRUE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->src = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) - cinfo->quant_tbl_ptrs[i] = NULL; - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - /* Initialize marker processor so application can override methods - * for COM, APPn markers before calling jpeg_read_header. - */ - jinit_marker_reader(cinfo); - - /* And initialize the overall input controller. */ - jinit_input_controller(cinfo); - - /* OK, I'm ready */ - cinfo->global_state = DSTATE_START; -} - - -/* - * Destruction of a JPEG decompression object - */ - -GLOBAL void -jpeg_destroy_decompress (j_decompress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG decompression operation, - * but don't destroy the object itself. - */ - -GLOBAL void -jpeg_abort_decompress (j_decompress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Install a special processing method for COM or APPn markers. - */ - -GLOBAL void -jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine) -{ - if (marker_code == JPEG_COM) - cinfo->marker->process_COM = routine; - else if (marker_code >= JPEG_APP0 && marker_code <= JPEG_APP0+15) - cinfo->marker->process_APPn[marker_code-JPEG_APP0] = routine; - else - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); -} - - -/* - * Set default decompression parameters. - */ - -LOCAL void -default_decompress_parms (j_decompress_ptr cinfo) -{ - /* Guess the input colorspace, and set output colorspace accordingly. */ - /* (Wish JPEG committee had provided a real way to specify this...) */ - /* Note application may override our guesses. */ - switch (cinfo->num_components) { - case 1: - cinfo->jpeg_color_space = JCS_GRAYSCALE; - cinfo->out_color_space = JCS_GRAYSCALE; - break; - - case 3: - if (cinfo->saw_JFIF_marker) { - cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ - } else if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_RGB; - break; - case 1: - cinfo->jpeg_color_space = JCS_YCbCr; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - break; - } - } else { - /* Saw no special markers, try to guess from the component IDs */ - int cid0 = cinfo->comp_info[0].component_id; - int cid1 = cinfo->comp_info[1].component_id; - int cid2 = cinfo->comp_info[2].component_id; - - if (cid0 == 1 && cid1 == 2 && cid2 == 3) - cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ - else if (cid0 == 82 && cid1 == 71 && cid2 == 66) - cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ - else { - TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - } - } - /* Always guess RGB is proper output colorspace. */ - cinfo->out_color_space = JCS_RGB; - break; - - case 4: - if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_CMYK; - break; - case 2: - cinfo->jpeg_color_space = JCS_YCCK; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ - break; - } - } else { - /* No special markers, assume straight CMYK. */ - cinfo->jpeg_color_space = JCS_CMYK; - } - cinfo->out_color_space = JCS_CMYK; - break; - - default: - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->out_color_space = JCS_UNKNOWN; - break; - } - - /* Set defaults for other decompression parameters. */ - cinfo->scale_num = 1; /* 1:1 scaling */ - cinfo->scale_denom = 1; - cinfo->output_gamma = 1.0; - cinfo->buffered_image = FALSE; - cinfo->raw_data_out = FALSE; - cinfo->dct_method = JDCT_DEFAULT; - cinfo->do_fancy_upsampling = TRUE; - cinfo->do_block_smoothing = TRUE; - cinfo->quantize_colors = FALSE; - /* We set these in case application only sets quantize_colors. */ - cinfo->dither_mode = JDITHER_FS; -#ifdef QUANT_2PASS_SUPPORTED - cinfo->two_pass_quantize = TRUE; -#else - cinfo->two_pass_quantize = FALSE; -#endif - cinfo->desired_number_of_colors = 256; - cinfo->colormap = NULL; - /* Initialize for no mode change in buffered-image mode. */ - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; -} - - -/* - * Decompression startup: read start of JPEG datastream to see what's there. - * Need only initialize JPEG object and supply a data source before calling. - * - * This routine will read as far as the first SOS marker (ie, actual start of - * compressed data), and will save all tables and parameters in the JPEG - * object. It will also initialize the decompression parameters to default - * values, and finally return JPEG_HEADER_OK. On return, the application may - * adjust the decompression parameters and then call jpeg_start_decompress. - * (Or, if the application only wanted to determine the image parameters, - * the data need not be decompressed. In that case, call jpeg_abort or - * jpeg_destroy to release any temporary space.) - * If an abbreviated (tables only) datastream is presented, the routine will - * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then - * re-use the JPEG object to read the abbreviated image datastream(s). - * It is unnecessary (but OK) to call jpeg_abort in this case. - * The JPEG_SUSPENDED return code only occurs if the data source module - * requests suspension of the decompressor. In this case the application - * should load more source data and then re-call jpeg_read_header to resume - * processing. - * If a non-suspending data source is used and require_image is TRUE, then the - * return code need not be inspected since only JPEG_HEADER_OK is possible. - * - * This routine is now just a front end to jpeg_consume_input, with some - * extra error checking. - */ - -GLOBAL int -jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) -{ - int retcode; - - if (cinfo->global_state != DSTATE_START && - cinfo->global_state != DSTATE_INHEADER) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - retcode = jpeg_consume_input(cinfo); - - switch (retcode) { - case JPEG_REACHED_SOS: - retcode = JPEG_HEADER_OK; - break; - case JPEG_REACHED_EOI: - if (require_image) /* Complain if application wanted an image */ - ERREXIT(cinfo, JERR_NO_IMAGE); - /* Reset to start state; it would be safer to require the application to - * call jpeg_abort, but we can't change it now for compatibility reasons. - * A side effect is to free any temporary memory (there shouldn't be any). - */ - jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ - retcode = JPEG_HEADER_TABLES_ONLY; - break; - case JPEG_SUSPENDED: - /* no work */ - break; - } - - return retcode; -} - - -/* - * Consume data in advance of what the decompressor requires. - * This can be called at any time once the decompressor object has - * been created and a data source has been set up. - * - * This routine is essentially a state machine that handles a couple - * of critical state-transition actions, namely initial setup and - * transition from header scanning to ready-for-start_decompress. - * All the actual input is done via the input controller's consume_input - * method. - */ - -GLOBAL int -jpeg_consume_input (j_decompress_ptr cinfo) -{ - int retcode = JPEG_SUSPENDED; - - /* NB: every possible DSTATE value should be listed in this switch */ - switch (cinfo->global_state) { - case DSTATE_START: - /* Start-of-datastream actions: reset appropriate modules */ - (*cinfo->inputctl->reset_input_controller) (cinfo); - /* Initialize application's data source module */ - (*cinfo->src->init_source) (cinfo); - cinfo->global_state = DSTATE_INHEADER; - /*FALLTHROUGH*/ - case DSTATE_INHEADER: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ - /* Set up default parameters based on header data */ - default_decompress_parms(cinfo); - /* Set global state: ready for start_decompress */ - cinfo->global_state = DSTATE_READY; - } - break; - case DSTATE_READY: - /* Can't advance past first SOS until start_decompress is called */ - retcode = JPEG_REACHED_SOS; - break; - case DSTATE_PRELOAD: - case DSTATE_PRESCAN: - case DSTATE_SCANNING: - case DSTATE_RAW_OK: - case DSTATE_BUFIMAGE: - case DSTATE_BUFPOST: - case DSTATE_STOPPING: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - break; - default: - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - return retcode; -} - - -/* - * Have we finished reading the input file? - */ - -GLOBAL boolean -jpeg_input_complete (j_decompress_ptr cinfo) -{ - /* Check for valid jpeg object */ - if (cinfo->global_state < DSTATE_START || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->eoi_reached; -} - - -/* - * Is there more than one scan? - */ - -GLOBAL boolean -jpeg_has_multiple_scans (j_decompress_ptr cinfo) -{ - /* Only valid after jpeg_read_header completes */ - if (cinfo->global_state < DSTATE_READY || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->has_multiple_scans; -} - - -/* - * Finish JPEG decompression. - * - * This will normally just verify the file trailer and release temp storage. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL boolean -jpeg_finish_decompress (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { - /* Terminate final pass of non-buffered mode */ - if (cinfo->output_scanline < cinfo->output_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state == DSTATE_BUFIMAGE) { - /* Finishing after a buffered-image operation */ - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state != DSTATE_STOPPING) { - /* STOPPING = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read until EOI */ - while (! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - /* Do final cleanup */ - (*cinfo->src->term_source) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); - return TRUE; -} +/* + * jdapimin.c + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-decompression case or the + * transcoding-only case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jdapistd.c. But also see jcomapi.c for routines + * shared by compression and decompression, and jdtrans.c for the transcoding + * case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG decompression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL void +jpeg_create_decompress (j_decompress_ptr cinfo) +{ + int i; + + /* For debugging purposes, zero the whole master structure. + * But error manager pointer is already there, so save and restore it. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + i = sizeof(struct jpeg_decompress_struct); + i = SIZEOF(struct jpeg_decompress_struct); + MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); + cinfo->err = err; + } + cinfo->is_decompressor = TRUE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->src = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) + cinfo->quant_tbl_ptrs[i] = NULL; + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Initialize marker processor so application can override methods + * for COM, APPn markers before calling jpeg_read_header. + */ + jinit_marker_reader(cinfo); + + /* And initialize the overall input controller. */ + jinit_input_controller(cinfo); + + /* OK, I'm ready */ + cinfo->global_state = DSTATE_START; +} + + +/* + * Destruction of a JPEG decompression object + */ + +GLOBAL void +jpeg_destroy_decompress (j_decompress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG decompression operation, + * but don't destroy the object itself. + */ + +GLOBAL void +jpeg_abort_decompress (j_decompress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Install a special processing method for COM or APPn markers. + */ + +GLOBAL void +jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine) +{ + if (marker_code == JPEG_COM) + cinfo->marker->process_COM = routine; + else if (marker_code >= JPEG_APP0 && marker_code <= JPEG_APP0+15) + cinfo->marker->process_APPn[marker_code-JPEG_APP0] = routine; + else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} + + +/* + * Set default decompression parameters. + */ + +LOCAL void +default_decompress_parms (j_decompress_ptr cinfo) +{ + /* Guess the input colorspace, and set output colorspace accordingly. */ + /* (Wish JPEG committee had provided a real way to specify this...) */ + /* Note application may override our guesses. */ + switch (cinfo->num_components) { + case 1: + cinfo->jpeg_color_space = JCS_GRAYSCALE; + cinfo->out_color_space = JCS_GRAYSCALE; + break; + + case 3: + if (cinfo->saw_JFIF_marker) { + cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ + } else if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_RGB; + break; + case 1: + cinfo->jpeg_color_space = JCS_YCbCr; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + break; + } + } else { + /* Saw no special markers, try to guess from the component IDs */ + int cid0 = cinfo->comp_info[0].component_id; + int cid1 = cinfo->comp_info[1].component_id; + int cid2 = cinfo->comp_info[2].component_id; + + if (cid0 == 1 && cid1 == 2 && cid2 == 3) + cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ + else if (cid0 == 82 && cid1 == 71 && cid2 == 66) + cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ + else { + TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + } + } + /* Always guess RGB is proper output colorspace. */ + cinfo->out_color_space = JCS_RGB; + break; + + case 4: + if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_CMYK; + break; + case 2: + cinfo->jpeg_color_space = JCS_YCCK; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ + break; + } + } else { + /* No special markers, assume straight CMYK. */ + cinfo->jpeg_color_space = JCS_CMYK; + } + cinfo->out_color_space = JCS_CMYK; + break; + + default: + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->out_color_space = JCS_UNKNOWN; + break; + } + + /* Set defaults for other decompression parameters. */ + cinfo->scale_num = 1; /* 1:1 scaling */ + cinfo->scale_denom = 1; + cinfo->output_gamma = 1.0; + cinfo->buffered_image = FALSE; + cinfo->raw_data_out = FALSE; + cinfo->dct_method = JDCT_DEFAULT; + cinfo->do_fancy_upsampling = TRUE; + cinfo->do_block_smoothing = TRUE; + cinfo->quantize_colors = FALSE; + /* We set these in case application only sets quantize_colors. */ + cinfo->dither_mode = JDITHER_FS; +#ifdef QUANT_2PASS_SUPPORTED + cinfo->two_pass_quantize = TRUE; +#else + cinfo->two_pass_quantize = FALSE; +#endif + cinfo->desired_number_of_colors = 256; + cinfo->colormap = NULL; + /* Initialize for no mode change in buffered-image mode. */ + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; +} + + +/* + * Decompression startup: read start of JPEG datastream to see what's there. + * Need only initialize JPEG object and supply a data source before calling. + * + * This routine will read as far as the first SOS marker (ie, actual start of + * compressed data), and will save all tables and parameters in the JPEG + * object. It will also initialize the decompression parameters to default + * values, and finally return JPEG_HEADER_OK. On return, the application may + * adjust the decompression parameters and then call jpeg_start_decompress. + * (Or, if the application only wanted to determine the image parameters, + * the data need not be decompressed. In that case, call jpeg_abort or + * jpeg_destroy to release any temporary space.) + * If an abbreviated (tables only) datastream is presented, the routine will + * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then + * re-use the JPEG object to read the abbreviated image datastream(s). + * It is unnecessary (but OK) to call jpeg_abort in this case. + * The JPEG_SUSPENDED return code only occurs if the data source module + * requests suspension of the decompressor. In this case the application + * should load more source data and then re-call jpeg_read_header to resume + * processing. + * If a non-suspending data source is used and require_image is TRUE, then the + * return code need not be inspected since only JPEG_HEADER_OK is possible. + * + * This routine is now just a front end to jpeg_consume_input, with some + * extra error checking. + */ + +GLOBAL int +jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) +{ + int retcode; + + if (cinfo->global_state != DSTATE_START && + cinfo->global_state != DSTATE_INHEADER) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + retcode = jpeg_consume_input(cinfo); + + switch (retcode) { + case JPEG_REACHED_SOS: + retcode = JPEG_HEADER_OK; + break; + case JPEG_REACHED_EOI: + if (require_image) /* Complain if application wanted an image */ + ERREXIT(cinfo, JERR_NO_IMAGE); + /* Reset to start state; it would be safer to require the application to + * call jpeg_abort, but we can't change it now for compatibility reasons. + * A side effect is to free any temporary memory (there shouldn't be any). + */ + jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ + retcode = JPEG_HEADER_TABLES_ONLY; + break; + case JPEG_SUSPENDED: + /* no work */ + break; + } + + return retcode; +} + + +/* + * Consume data in advance of what the decompressor requires. + * This can be called at any time once the decompressor object has + * been created and a data source has been set up. + * + * This routine is essentially a state machine that handles a couple + * of critical state-transition actions, namely initial setup and + * transition from header scanning to ready-for-start_decompress. + * All the actual input is done via the input controller's consume_input + * method. + */ + +GLOBAL int +jpeg_consume_input (j_decompress_ptr cinfo) +{ + int retcode = JPEG_SUSPENDED; + + /* NB: every possible DSTATE value should be listed in this switch */ + switch (cinfo->global_state) { + case DSTATE_START: + /* Start-of-datastream actions: reset appropriate modules */ + (*cinfo->inputctl->reset_input_controller) (cinfo); + /* Initialize application's data source module */ + (*cinfo->src->init_source) (cinfo); + cinfo->global_state = DSTATE_INHEADER; + /*FALLTHROUGH*/ + case DSTATE_INHEADER: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ + /* Set up default parameters based on header data */ + default_decompress_parms(cinfo); + /* Set global state: ready for start_decompress */ + cinfo->global_state = DSTATE_READY; + } + break; + case DSTATE_READY: + /* Can't advance past first SOS until start_decompress is called */ + retcode = JPEG_REACHED_SOS; + break; + case DSTATE_PRELOAD: + case DSTATE_PRESCAN: + case DSTATE_SCANNING: + case DSTATE_RAW_OK: + case DSTATE_BUFIMAGE: + case DSTATE_BUFPOST: + case DSTATE_STOPPING: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + break; + default: + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + return retcode; +} + + +/* + * Have we finished reading the input file? + */ + +GLOBAL boolean +jpeg_input_complete (j_decompress_ptr cinfo) +{ + /* Check for valid jpeg object */ + if (cinfo->global_state < DSTATE_START || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->eoi_reached; +} + + +/* + * Is there more than one scan? + */ + +GLOBAL boolean +jpeg_has_multiple_scans (j_decompress_ptr cinfo) +{ + /* Only valid after jpeg_read_header completes */ + if (cinfo->global_state < DSTATE_READY || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->has_multiple_scans; +} + + +/* + * Finish JPEG decompression. + * + * This will normally just verify the file trailer and release temp storage. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL boolean +jpeg_finish_decompress (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { + /* Terminate final pass of non-buffered mode */ + if (cinfo->output_scanline < cinfo->output_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state == DSTATE_BUFIMAGE) { + /* Finishing after a buffered-image operation */ + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state != DSTATE_STOPPING) { + /* STOPPING = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read until EOI */ + while (! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + /* Do final cleanup */ + (*cinfo->src->term_source) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); + return TRUE; +} diff --git a/libs/jpeg6/jdapistd.cpp b/libs/jpeg6/jdapistd.cpp index 7781e16..e36f25c 100755 --- a/libs/jpeg6/jdapistd.cpp +++ b/libs/jpeg6/jdapistd.cpp @@ -1,275 +1,275 @@ -/* - * jdapistd.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-decompression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_decompress, it will end up linking in the entire decompressor. - * We thus must separate this file from jdapimin.c to avoid linking the - * whole decompression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL boolean output_pass_setup JPP((j_decompress_ptr cinfo)); - - -/* - * Decompression initialization. - * jpeg_read_header must be completed before calling this. - * - * If a multipass operating mode was selected, this will do all but the - * last pass, and thus may take a great deal of time. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL boolean -jpeg_start_decompress (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize master control, select active modules */ - jinit_master_decompress(cinfo); - if (cinfo->buffered_image) { - /* No more work here; expecting jpeg_start_output next */ - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; - } - cinfo->global_state = DSTATE_PRELOAD; - } - if (cinfo->global_state == DSTATE_PRELOAD) { - /* If file has multiple scans, absorb them all into the coef buffer */ - if (cinfo->inputctl->has_multiple_scans) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return FALSE; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* jdmaster underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - } - cinfo->output_scan_number = cinfo->input_scan_number; - } else if (cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any dummy output passes, and set up for the final pass */ - return output_pass_setup(cinfo); -} - - -/* - * Set up for an output pass, and perform any dummy pass(es) needed. - * Common subroutine for jpeg_start_decompress and jpeg_start_output. - * Entry: global_state = DSTATE_PRESCAN only if previously suspended. - * Exit: If done, returns TRUE and sets global_state for proper output mode. - * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. - */ - -LOCAL boolean -output_pass_setup (j_decompress_ptr cinfo) -{ - if (cinfo->global_state != DSTATE_PRESCAN) { - /* First call: do pass setup */ - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; - cinfo->global_state = DSTATE_PRESCAN; - } - /* Loop over any required dummy passes */ - while (cinfo->master->is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Crank through the dummy pass */ - while (cinfo->output_scanline < cinfo->output_height) { - JDIMENSION last_scanline; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* Process some data */ - last_scanline = cinfo->output_scanline; - (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, - &cinfo->output_scanline, (JDIMENSION) 0); - if (cinfo->output_scanline == last_scanline) - return FALSE; /* No progress made, must suspend */ - } - /* Finish up dummy pass, and set up for another one */ - (*cinfo->master->finish_output_pass) (cinfo); - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } - /* Ready for application to drive output pass through - * jpeg_read_scanlines or jpeg_read_raw_data. - */ - cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; - return TRUE; -} - - -/* - * Read some scanlines of data from the JPEG decompressor. - * - * The return value will be the number of lines actually read. - * This may be less than the number requested in several cases, - * including bottom of image, data source suspension, and operating - * modes that emit multiple scanlines at a time. - * - * Note: we warn about excess calls to jpeg_read_scanlines() since - * this likely signals an application programmer error. However, - * an oversize buffer (max_lines > scanlines remaining) is not an error. - */ - -GLOBAL JDIMENSION -jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION max_lines) -{ - JDIMENSION row_ctr; - - if (cinfo->global_state != DSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Process some data */ - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); - cinfo->output_scanline += row_ctr; - return row_ctr; -} - - -/* - * Alternate entry point to read raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL JDIMENSION -jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION max_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != DSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Verify that at least one iMCU row can be returned. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size; - if (max_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Decompress directly into user's buffer. */ - if (! (*cinfo->coef->decompress_data) (cinfo, data)) - return 0; /* suspension forced, can do nothing more */ - - /* OK, we processed one iMCU row. */ - cinfo->output_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} - - -/* Additional entry points for buffered-image mode. */ - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Initialize for an output pass in buffered-image mode. - */ - -GLOBAL boolean -jpeg_start_output (j_decompress_ptr cinfo, int scan_number) -{ - if (cinfo->global_state != DSTATE_BUFIMAGE && - cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Limit scan number to valid range */ - if (scan_number <= 0) - scan_number = 1; - if (cinfo->inputctl->eoi_reached && - scan_number > cinfo->input_scan_number) - scan_number = cinfo->input_scan_number; - cinfo->output_scan_number = scan_number; - /* Perform any dummy output passes, and set up for the real pass */ - return output_pass_setup(cinfo); -} - - -/* - * Finish up after an output pass in buffered-image mode. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL boolean -jpeg_finish_output (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { - /* Terminate this pass. */ - /* We do not require the whole pass to have been completed. */ - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_BUFPOST; - } else if (cinfo->global_state != DSTATE_BUFPOST) { - /* BUFPOST = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read markers looking for SOS or EOI */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ +/* + * jdapistd.c + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-decompression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_decompress, it will end up linking in the entire decompressor. + * We thus must separate this file from jdapimin.c to avoid linking the + * whole decompression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL boolean output_pass_setup JPP((j_decompress_ptr cinfo)); + + +/* + * Decompression initialization. + * jpeg_read_header must be completed before calling this. + * + * If a multipass operating mode was selected, this will do all but the + * last pass, and thus may take a great deal of time. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL boolean +jpeg_start_decompress (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize master control, select active modules */ + jinit_master_decompress(cinfo); + if (cinfo->buffered_image) { + /* No more work here; expecting jpeg_start_output next */ + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; + } + cinfo->global_state = DSTATE_PRELOAD; + } + if (cinfo->global_state == DSTATE_PRELOAD) { + /* If file has multiple scans, absorb them all into the coef buffer */ + if (cinfo->inputctl->has_multiple_scans) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return FALSE; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* jdmaster underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + } + cinfo->output_scan_number = cinfo->input_scan_number; + } else if (cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any dummy output passes, and set up for the final pass */ + return output_pass_setup(cinfo); +} + + +/* + * Set up for an output pass, and perform any dummy pass(es) needed. + * Common subroutine for jpeg_start_decompress and jpeg_start_output. + * Entry: global_state = DSTATE_PRESCAN only if previously suspended. + * Exit: If done, returns TRUE and sets global_state for proper output mode. + * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. + */ + +LOCAL boolean +output_pass_setup (j_decompress_ptr cinfo) +{ + if (cinfo->global_state != DSTATE_PRESCAN) { + /* First call: do pass setup */ + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; + cinfo->global_state = DSTATE_PRESCAN; + } + /* Loop over any required dummy passes */ + while (cinfo->master->is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Crank through the dummy pass */ + while (cinfo->output_scanline < cinfo->output_height) { + JDIMENSION last_scanline; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* Process some data */ + last_scanline = cinfo->output_scanline; + (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, + &cinfo->output_scanline, (JDIMENSION) 0); + if (cinfo->output_scanline == last_scanline) + return FALSE; /* No progress made, must suspend */ + } + /* Finish up dummy pass, and set up for another one */ + (*cinfo->master->finish_output_pass) (cinfo); + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } + /* Ready for application to drive output pass through + * jpeg_read_scanlines or jpeg_read_raw_data. + */ + cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; + return TRUE; +} + + +/* + * Read some scanlines of data from the JPEG decompressor. + * + * The return value will be the number of lines actually read. + * This may be less than the number requested in several cases, + * including bottom of image, data source suspension, and operating + * modes that emit multiple scanlines at a time. + * + * Note: we warn about excess calls to jpeg_read_scanlines() since + * this likely signals an application programmer error. However, + * an oversize buffer (max_lines > scanlines remaining) is not an error. + */ + +GLOBAL JDIMENSION +jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION max_lines) +{ + JDIMENSION row_ctr; + + if (cinfo->global_state != DSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Process some data */ + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); + cinfo->output_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to read raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL JDIMENSION +jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION max_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != DSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Verify that at least one iMCU row can be returned. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size; + if (max_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Decompress directly into user's buffer. */ + if (! (*cinfo->coef->decompress_data) (cinfo, data)) + return 0; /* suspension forced, can do nothing more */ + + /* OK, we processed one iMCU row. */ + cinfo->output_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} + + +/* Additional entry points for buffered-image mode. */ + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Initialize for an output pass in buffered-image mode. + */ + +GLOBAL boolean +jpeg_start_output (j_decompress_ptr cinfo, int scan_number) +{ + if (cinfo->global_state != DSTATE_BUFIMAGE && + cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Limit scan number to valid range */ + if (scan_number <= 0) + scan_number = 1; + if (cinfo->inputctl->eoi_reached && + scan_number > cinfo->input_scan_number) + scan_number = cinfo->input_scan_number; + cinfo->output_scan_number = scan_number; + /* Perform any dummy output passes, and set up for the real pass */ + return output_pass_setup(cinfo); +} + + +/* + * Finish up after an output pass in buffered-image mode. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL boolean +jpeg_finish_output (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { + /* Terminate this pass. */ + /* We do not require the whole pass to have been completed. */ + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_BUFPOST; + } else if (cinfo->global_state != DSTATE_BUFPOST) { + /* BUFPOST = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read markers looking for SOS or EOI */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/libs/jpeg6/jdatasrc.cpp b/libs/jpeg6/jdatasrc.cpp index 5c1696d..0bf7866 100755 --- a/libs/jpeg6/jdatasrc.cpp +++ b/libs/jpeg6/jdatasrc.cpp @@ -1,204 +1,204 @@ -/* - * jdatasrc.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains decompression data source routines for the case of - * reading JPEG data from a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * source manager. - * IMPORTANT: we assume that fread() will correctly transcribe an array of - * JOCTETs from 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - - -/* Expanded data source object for stdio input */ - -typedef struct { - struct jpeg_source_mgr pub; /* public fields */ - - unsigned char *infile; /* source stream */ - JOCTET * buffer; /* start of buffer */ - boolean start_of_file; /* have we gotten any data yet? */ -} my_source_mgr; - -typedef my_source_mgr * my_src_ptr; - -#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ - - -/* - * Initialize source --- called by jpeg_read_header - * before any data is actually read. - */ - -METHODDEF void -init_source (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* We reset the empty-input-file flag for each image, - * but we don't clear the input buffer. - * This is correct behavior for reading a series of images from one source. - */ - src->start_of_file = TRUE; -} - - -/* - * Fill the input buffer --- called whenever buffer is emptied. - * - * In typical applications, this should read fresh data into the buffer - * (ignoring the current state of next_input_byte & bytes_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been reloaded. It is not necessary to - * fill the buffer entirely, only to obtain at least one more byte. - * - * There is no such thing as an EOF return. If the end of the file has been - * reached, the routine has a choice of ERREXIT() or inserting fake data into - * the buffer. In most cases, generating a warning message and inserting a - * fake EOI marker is the best course of action --- this will allow the - * decompressor to output however much of the image is there. However, - * the resulting error message is misleading if the real problem is an empty - * input file, so we handle that case specially. - * - * In applications that need to be able to suspend compression due to input - * not being available yet, a FALSE return indicates that no more data can be - * obtained right now, but more may be forthcoming later. In this situation, - * the decompressor will return to its caller (with an indication of the - * number of scanlines it has read, if any). The application should resume - * decompression after it has loaded more data into the input buffer. Note - * that there are substantial restrictions on the use of suspension --- see - * the documentation. - * - * When suspending, the decompressor will back up to a convenient restart point - * (typically the start of the current MCU). next_input_byte & bytes_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point must be rescanned after resumption, so move it to - * the front of the buffer rather than discarding it. - */ - -METHODDEF boolean -fill_input_buffer (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - memcpy( src->buffer, src->infile, INPUT_BUF_SIZE ); - - src->infile += INPUT_BUF_SIZE; - - src->pub.next_input_byte = src->buffer; - src->pub.bytes_in_buffer = INPUT_BUF_SIZE; - src->start_of_file = FALSE; - - return TRUE; -} - - -/* - * Skip data --- used to skip over a potentially large amount of - * uninteresting data (such as an APPn marker). - * - * Writers of suspendable-input applications must note that skip_input_data - * is not granted the right to give a suspension return. If the skip extends - * beyond the data currently in the buffer, the buffer can be marked empty so - * that the next read will cause a fill_input_buffer call that can suspend. - * Arranging for additional bytes to be discarded before reloading the input - * buffer is the application writer's problem. - */ - -METHODDEF void -skip_input_data (j_decompress_ptr cinfo, long num_bytes) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* Just a dumb implementation for now. Could use fseek() except - * it doesn't work on pipes. Not clear that being smart is worth - * any trouble anyway --- large skips are infrequent. - */ - if (num_bytes > 0) { - while (num_bytes > (long) src->pub.bytes_in_buffer) { - num_bytes -= (long) src->pub.bytes_in_buffer; - (void) fill_input_buffer(cinfo); - /* note we assume that fill_input_buffer will never return FALSE, - * so suspension need not be handled. - */ - } - src->pub.next_input_byte += (size_t) num_bytes; - src->pub.bytes_in_buffer -= (size_t) num_bytes; - } -} - - -/* - * An additional method that can be provided by data source modules is the - * resync_to_restart method for error recovery in the presence of RST markers. - * For the moment, this source module just uses the default resync method - * provided by the JPEG library. That method assumes that no backtracking - * is possible. - */ - - -/* - * Terminate source --- called by jpeg_finish_decompress - * after all data has been read. Often a no-op. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF void -term_source (j_decompress_ptr cinfo) -{ - /* no work necessary here */ -} - - -/* - * Prepare for input from a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing decompression. - */ - -GLOBAL void -jpeg_stdio_src (j_decompress_ptr cinfo, unsigned char *infile) -{ - my_src_ptr src; - - /* The source object and input buffer are made permanent so that a series - * of JPEG images can be read from the same file by calling jpeg_stdio_src - * only before the first one. (If we discarded the buffer at the end of - * one image, we'd likely lose the start of the next one.) - * This makes it unsafe to use this manager and a different source - * manager serially with the same JPEG object. Caveat programmer. - */ - if (cinfo->src == NULL) { /* first time for this JPEG object? */ - cinfo->src = (struct jpeg_source_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_source_mgr)); - src = (my_src_ptr) cinfo->src; - src->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - INPUT_BUF_SIZE * SIZEOF(JOCTET)); - } - - src = (my_src_ptr) cinfo->src; - src->pub.init_source = init_source; - src->pub.fill_input_buffer = fill_input_buffer; - src->pub.skip_input_data = skip_input_data; - src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ - src->pub.term_source = term_source; - src->infile = infile; - src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ - src->pub.next_input_byte = NULL; /* until buffer loaded */ -} +/* + * jdatasrc.c + * + * Copyright (C) 1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains decompression data source routines for the case of + * reading JPEG data from a file (or any stdio stream). While these routines + * are sufficient for most applications, some will want to use a different + * source manager. + * IMPORTANT: we assume that fread() will correctly transcribe an array of + * JOCTETs from 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + + +/* Expanded data source object for stdio input */ + +typedef struct { + struct jpeg_source_mgr pub; /* public fields */ + + unsigned char *infile; /* source stream */ + JOCTET * buffer; /* start of buffer */ + boolean start_of_file; /* have we gotten any data yet? */ +} my_source_mgr; + +typedef my_source_mgr * my_src_ptr; + +#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ + + +/* + * Initialize source --- called by jpeg_read_header + * before any data is actually read. + */ + +METHODDEF void +init_source (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + + /* We reset the empty-input-file flag for each image, + * but we don't clear the input buffer. + * This is correct behavior for reading a series of images from one source. + */ + src->start_of_file = TRUE; +} + + +/* + * Fill the input buffer --- called whenever buffer is emptied. + * + * In typical applications, this should read fresh data into the buffer + * (ignoring the current state of next_input_byte & bytes_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been reloaded. It is not necessary to + * fill the buffer entirely, only to obtain at least one more byte. + * + * There is no such thing as an EOF return. If the end of the file has been + * reached, the routine has a choice of ERREXIT() or inserting fake data into + * the buffer. In most cases, generating a warning message and inserting a + * fake EOI marker is the best course of action --- this will allow the + * decompressor to output however much of the image is there. However, + * the resulting error message is misleading if the real problem is an empty + * input file, so we handle that case specially. + * + * In applications that need to be able to suspend compression due to input + * not being available yet, a FALSE return indicates that no more data can be + * obtained right now, but more may be forthcoming later. In this situation, + * the decompressor will return to its caller (with an indication of the + * number of scanlines it has read, if any). The application should resume + * decompression after it has loaded more data into the input buffer. Note + * that there are substantial restrictions on the use of suspension --- see + * the documentation. + * + * When suspending, the decompressor will back up to a convenient restart point + * (typically the start of the current MCU). next_input_byte & bytes_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point must be rescanned after resumption, so move it to + * the front of the buffer rather than discarding it. + */ + +METHODDEF boolean +fill_input_buffer (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + + memcpy( src->buffer, src->infile, INPUT_BUF_SIZE ); + + src->infile += INPUT_BUF_SIZE; + + src->pub.next_input_byte = src->buffer; + src->pub.bytes_in_buffer = INPUT_BUF_SIZE; + src->start_of_file = FALSE; + + return TRUE; +} + + +/* + * Skip data --- used to skip over a potentially large amount of + * uninteresting data (such as an APPn marker). + * + * Writers of suspendable-input applications must note that skip_input_data + * is not granted the right to give a suspension return. If the skip extends + * beyond the data currently in the buffer, the buffer can be marked empty so + * that the next read will cause a fill_input_buffer call that can suspend. + * Arranging for additional bytes to be discarded before reloading the input + * buffer is the application writer's problem. + */ + +METHODDEF void +skip_input_data (j_decompress_ptr cinfo, long num_bytes) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + + /* Just a dumb implementation for now. Could use fseek() except + * it doesn't work on pipes. Not clear that being smart is worth + * any trouble anyway --- large skips are infrequent. + */ + if (num_bytes > 0) { + while (num_bytes > (long) src->pub.bytes_in_buffer) { + num_bytes -= (long) src->pub.bytes_in_buffer; + (void) fill_input_buffer(cinfo); + /* note we assume that fill_input_buffer will never return FALSE, + * so suspension need not be handled. + */ + } + src->pub.next_input_byte += (size_t) num_bytes; + src->pub.bytes_in_buffer -= (size_t) num_bytes; + } +} + + +/* + * An additional method that can be provided by data source modules is the + * resync_to_restart method for error recovery in the presence of RST markers. + * For the moment, this source module just uses the default resync method + * provided by the JPEG library. That method assumes that no backtracking + * is possible. + */ + + +/* + * Terminate source --- called by jpeg_finish_decompress + * after all data has been read. Often a no-op. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF void +term_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Prepare for input from a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing decompression. + */ + +GLOBAL void +jpeg_stdio_src (j_decompress_ptr cinfo, unsigned char *infile) +{ + my_src_ptr src; + + /* The source object and input buffer are made permanent so that a series + * of JPEG images can be read from the same file by calling jpeg_stdio_src + * only before the first one. (If we discarded the buffer at the end of + * one image, we'd likely lose the start of the next one.) + * This makes it unsafe to use this manager and a different source + * manager serially with the same JPEG object. Caveat programmer. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_source_mgr)); + src = (my_src_ptr) cinfo->src; + src->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + INPUT_BUF_SIZE * SIZEOF(JOCTET)); + } + + src = (my_src_ptr) cinfo->src; + src->pub.init_source = init_source; + src->pub.fill_input_buffer = fill_input_buffer; + src->pub.skip_input_data = skip_input_data; + src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->pub.term_source = term_source; + src->infile = infile; + src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ + src->pub.next_input_byte = NULL; /* until buffer loaded */ +} diff --git a/libs/jpeg6/jdcoefct.cpp b/libs/jpeg6/jdcoefct.cpp index 2b20c07..ba153f5 100755 --- a/libs/jpeg6/jdcoefct.cpp +++ b/libs/jpeg6/jdcoefct.cpp @@ -1,725 +1,725 @@ -/* - * jdcoefct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for decompression. - * This controller is the top level of the JPEG decompressor proper. - * The coefficient buffer lies between entropy decoding and inverse-DCT steps. - * - * In buffered-image mode, this controller is the interface between - * input-oriented processing and output-oriented processing. - * Also, the input side (only) is used when reading a file for transcoding. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* Block smoothing is only applicable for progressive JPEG, so: */ -#ifndef D_PROGRESSIVE_SUPPORTED -#undef BLOCK_SMOOTHING_SUPPORTED -#endif - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_coef_controller pub; /* public fields */ - - /* These variables keep track of the current location of the input side. */ - /* cinfo->input_iMCU_row is also used for this. */ - JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* The output side's location is represented by cinfo->output_iMCU_row. */ - - /* In single-pass modes, it's sufficient to buffer just one MCU. - * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, - * and let the entropy decoder write into that workspace each time. - * (On 80x86, the workspace is FAR even though it's not really very big; - * this is to keep the module interfaces unchanged when a large coefficient - * buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays; it is used only by the input side. - */ - JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -#endif - -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* When doing block smoothing, we latch coefficient Al values here */ - int * coef_bits_latch; -#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ -#endif -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - -/* Forward declarations */ -METHODDEF int decompress_onepass - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#ifdef D_MULTISCAN_FILES_SUPPORTED -METHODDEF int decompress_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif -#ifdef BLOCK_SMOOTHING_SUPPORTED -LOCAL boolean smoothing_ok JPP((j_decompress_ptr cinfo)); -METHODDEF int decompress_smooth_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif - - -LOCAL void -start_iMCU_row (j_decompress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row (input side) */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->MCU_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for an input processing pass. - */ - -METHODDEF void -start_input_pass (j_decompress_ptr cinfo) -{ - cinfo->input_iMCU_row = 0; - start_iMCU_row(cinfo); -} - - -/* - * Initialize for an output processing pass. - */ - -METHODDEF void -start_output_pass (j_decompress_ptr cinfo) -{ -#ifdef BLOCK_SMOOTHING_SUPPORTED - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* If multipass, check to see whether to use block smoothing on this pass */ - if (coef->pub.coef_arrays != NULL) { - if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) - coef->pub.decompress_data = decompress_smooth_data; - else - coef->pub.decompress_data = decompress_data; - } -#endif - cinfo->output_iMCU_row = 0; -} - - -/* - * Decompress and return some data in the single-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Input and output must run in lockstep since we have only a one-MCU buffer. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image. - * For single pass, this is the same as the components in the scan. - */ - -METHODDEF int -decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, useful_width; - JSAMPARRAY output_ptr; - JDIMENSION start_col, output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Loop to process as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ - jzero_far((void FAR *) coef->MCU_buffer[0], - (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - /* Determine where data should go in output_buf and do the IDCT thing. - * We skip dummy blocks at the right and bottom edges (but blkn gets - * incremented past them!). Note the inner loop relies on having - * allocated the MCU_buffer[] blocks sequentially. - */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) { - blkn += compptr->MCU_blocks; - continue; - } - inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; - useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - output_ptr = output_buf[ci] + yoffset * compptr->DCT_scaled_size; - start_col = MCU_col_num * compptr->MCU_sample_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (cinfo->input_iMCU_row < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - output_col = start_col; - for (xindex = 0; xindex < useful_width; xindex++) { - (*inverse_DCT) (cinfo, compptr, - (JCOEFPTR) coef->MCU_buffer[blkn+xindex], - output_ptr, output_col); - output_col += compptr->DCT_scaled_size; - } - } - blkn += compptr->MCU_width; - output_ptr += compptr->DCT_scaled_size; - } - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - cinfo->output_iMCU_row++; - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Dummy consume-input routine for single-pass operation. - */ - -METHODDEF int -dummy_consume_data (j_decompress_ptr cinfo) -{ - return JPEG_SUSPENDED; /* Always indicate nothing was done */ -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Consume input data and store it in the full-image coefficient buffer. - * We read as much as one fully interleaved MCU row ("iMCU" row) per call, - * ie, v_samp_factor block rows for each component in the scan. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - */ - -METHODDEF int -consume_data (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - cinfo->input_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Note: entropy decoder expects buffer to be zeroed, - * but this is handled automatically by the memory manager - * because we requested a pre-zeroed array. - */ - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - } - } - } - /* Try to fetch the MCU. */ - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Decompress and return some data in the multi-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image. - */ - -METHODDEF int -decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num; - int ci, block_row, block_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number < cinfo->output_scan_number || - (cinfo->input_scan_number == cinfo->output_scan_number && - cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - cinfo->output_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - output_col = 0; - for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { - (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, - output_ptr, output_col); - buffer_ptr++; - output_col += compptr->DCT_scaled_size; - } - output_ptr += compptr->DCT_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -#ifdef BLOCK_SMOOTHING_SUPPORTED - -/* - * This code applies interblock smoothing as described by section K.8 - * of the JPEG standard: the first 5 AC coefficients are estimated from - * the DC values of a DCT block and its 8 neighboring blocks. - * We apply smoothing only for progressive JPEG decoding, and only if - * the coefficients it can estimate are not yet known to full precision. - */ - -/* - * Determine whether block smoothing is applicable and safe. - * We also latch the current states of the coef_bits[] entries for the - * AC coefficients; otherwise, if the input side of the decompressor - * advances into a new scan, we might think the coefficients are known - * more accurately than they really are. - */ - -LOCAL boolean -smoothing_ok (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - boolean smoothing_useful = FALSE; - int ci, coefi; - jpeg_component_info *compptr; - JQUANT_TBL * qtable; - int * coef_bits; - int * coef_bits_latch; - - if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) - return FALSE; - - /* Allocate latch area if not already done */ - if (coef->coef_bits_latch == NULL) - coef->coef_bits_latch = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * - (SAVED_COEFS * SIZEOF(int))); - coef_bits_latch = coef->coef_bits_latch; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* All components' quantization values must already be latched. */ - if ((qtable = compptr->quant_table) == NULL) - return FALSE; - /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ - for (coefi = 0; coefi <= 5; coefi++) { - if (qtable->quantval[coefi] == 0) - return FALSE; - } - /* DC values must be at least partly known for all components. */ - coef_bits = cinfo->coef_bits[ci]; - if (coef_bits[0] < 0) - return FALSE; - /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ - for (coefi = 1; coefi <= 5; coefi++) { - coef_bits_latch[coefi] = coef_bits[coefi]; - if (coef_bits[coefi] != 0) - smoothing_useful = TRUE; - } - coef_bits_latch += SAVED_COEFS; - } - - return smoothing_useful; -} - - -/* - * Variant of decompress_data for use when doing block smoothing. - */ - -METHODDEF int -decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num, last_block_column; - int ci, block_row, block_rows, access_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr, prev_block_row, next_block_row; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - boolean first_row, last_row; - JBLOCK workspace; - int *coef_bits; - JQUANT_TBL *quanttbl; - INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; - int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; - int Al, pred; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if (cinfo->input_scan_number == cinfo->output_scan_number) { - /* If input is working on current scan, we ordinarily want it to - * have completed the current row. But if input scan is DC, - * we want it to keep one row ahead so that next block row's DC - * values are up to date. - */ - JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; - if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) - break; - } - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) { - block_rows = compptr->v_samp_factor; - access_rows = block_rows * 2; /* this and next iMCU row */ - last_row = FALSE; - } else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - access_rows = block_rows; /* this iMCU row only */ - last_row = TRUE; - } - /* Align the virtual buffer for this component. */ - if (cinfo->output_iMCU_row > 0) { - access_rows += compptr->v_samp_factor; /* prior iMCU row too */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, - (JDIMENSION) access_rows, FALSE); - buffer += compptr->v_samp_factor; /* point to current iMCU row */ - first_row = FALSE; - } else { - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); - first_row = TRUE; - } - /* Fetch component-dependent info */ - coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); - quanttbl = compptr->quant_table; - Q00 = quanttbl->quantval[0]; - Q01 = quanttbl->quantval[1]; - Q10 = quanttbl->quantval[2]; - Q20 = quanttbl->quantval[3]; - Q11 = quanttbl->quantval[4]; - Q02 = quanttbl->quantval[5]; - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - if (first_row && block_row == 0) - prev_block_row = buffer_ptr; - else - prev_block_row = buffer[block_row-1]; - if (last_row && block_row == block_rows-1) - next_block_row = buffer_ptr; - else - next_block_row = buffer[block_row+1]; - /* We fetch the surrounding DC values using a sliding-register approach. - * Initialize all nine here so as to do the right thing on narrow pics. - */ - DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; - DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; - DC7 = DC8 = DC9 = (int) next_block_row[0][0]; - output_col = 0; - last_block_column = compptr->width_in_blocks - 1; - for (block_num = 0; block_num <= last_block_column; block_num++) { - /* Fetch current DCT block into workspace so we can modify it. */ - jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); - /* Update DC values */ - if (block_num < last_block_column) { - DC3 = (int) prev_block_row[1][0]; - DC6 = (int) buffer_ptr[1][0]; - DC9 = (int) next_block_row[1][0]; - } - /* Compute coefficient estimates per K.8. - * An estimate is applied only if coefficient is still zero, - * and is not known to be fully accurate. - */ - /* AC01 */ - if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { - num = 36 * Q00 * (DC4 - DC6); - if (num >= 0) { - pred = (int) (((Q01<<7) + num) / (Q01<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q10<<7) + num) / (Q10<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q20<<7) + num) / (Q20<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q11<<7) + num) / (Q11<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q02<<7) + num) / (Q02<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_scaled_size; - } - output_ptr += compptr->DCT_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* BLOCK_SMOOTHING_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL void -jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_d_coef_controller *) coef; - coef->pub.start_input_pass = start_input_pass; - coef->pub.start_output_pass = start_output_pass; -#ifdef BLOCK_SMOOTHING_SUPPORTED - coef->coef_bits_latch = NULL; -#endif - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - /* Note we ask for a pre-zeroed array. */ - int ci, access_rows; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - access_rows = compptr->v_samp_factor; -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* If block smoothing could be used, need a bigger window */ - if (cinfo->progressive_mode) - access_rows *= 3; -#endif - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) access_rows); - } - coef->pub.consume_data = consume_data; - coef->pub.decompress_data = decompress_data; - coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->pub.consume_data = dummy_consume_data; - coef->pub.decompress_data = decompress_onepass; - coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ - } -} +/* + * jdcoefct.c + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for decompression. + * This controller is the top level of the JPEG decompressor proper. + * The coefficient buffer lies between entropy decoding and inverse-DCT steps. + * + * In buffered-image mode, this controller is the interface between + * input-oriented processing and output-oriented processing. + * Also, the input side (only) is used when reading a file for transcoding. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* Block smoothing is only applicable for progressive JPEG, so: */ +#ifndef D_PROGRESSIVE_SUPPORTED +#undef BLOCK_SMOOTHING_SUPPORTED +#endif + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_coef_controller pub; /* public fields */ + + /* These variables keep track of the current location of the input side. */ + /* cinfo->input_iMCU_row is also used for this. */ + JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* The output side's location is represented by cinfo->output_iMCU_row. */ + + /* In single-pass modes, it's sufficient to buffer just one MCU. + * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, + * and let the entropy decoder write into that workspace each time. + * (On 80x86, the workspace is FAR even though it's not really very big; + * this is to keep the module interfaces unchanged when a large coefficient + * buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays; it is used only by the input side. + */ + JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +#endif + +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* When doing block smoothing, we latch coefficient Al values here */ + int * coef_bits_latch; +#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ +#endif +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + +/* Forward declarations */ +METHODDEF int decompress_onepass + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#ifdef D_MULTISCAN_FILES_SUPPORTED +METHODDEF int decompress_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif +#ifdef BLOCK_SMOOTHING_SUPPORTED +LOCAL boolean smoothing_ok JPP((j_decompress_ptr cinfo)); +METHODDEF int decompress_smooth_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif + + +LOCAL void +start_iMCU_row (j_decompress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row (input side) */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->MCU_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for an input processing pass. + */ + +METHODDEF void +start_input_pass (j_decompress_ptr cinfo) +{ + cinfo->input_iMCU_row = 0; + start_iMCU_row(cinfo); +} + + +/* + * Initialize for an output processing pass. + */ + +METHODDEF void +start_output_pass (j_decompress_ptr cinfo) +{ +#ifdef BLOCK_SMOOTHING_SUPPORTED + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* If multipass, check to see whether to use block smoothing on this pass */ + if (coef->pub.coef_arrays != NULL) { + if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) + coef->pub.decompress_data = decompress_smooth_data; + else + coef->pub.decompress_data = decompress_data; + } +#endif + cinfo->output_iMCU_row = 0; +} + + +/* + * Decompress and return some data in the single-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Input and output must run in lockstep since we have only a one-MCU buffer. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image. + * For single pass, this is the same as the components in the scan. + */ + +METHODDEF int +decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, useful_width; + JSAMPARRAY output_ptr; + JDIMENSION start_col, output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Loop to process as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ + jzero_far((void FAR *) coef->MCU_buffer[0], + (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + /* Determine where data should go in output_buf and do the IDCT thing. + * We skip dummy blocks at the right and bottom edges (but blkn gets + * incremented past them!). Note the inner loop relies on having + * allocated the MCU_buffer[] blocks sequentially. + */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) { + blkn += compptr->MCU_blocks; + continue; + } + inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; + useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + output_ptr = output_buf[ci] + yoffset * compptr->DCT_scaled_size; + start_col = MCU_col_num * compptr->MCU_sample_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (cinfo->input_iMCU_row < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + output_col = start_col; + for (xindex = 0; xindex < useful_width; xindex++) { + (*inverse_DCT) (cinfo, compptr, + (JCOEFPTR) coef->MCU_buffer[blkn+xindex], + output_ptr, output_col); + output_col += compptr->DCT_scaled_size; + } + } + blkn += compptr->MCU_width; + output_ptr += compptr->DCT_scaled_size; + } + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + cinfo->output_iMCU_row++; + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Dummy consume-input routine for single-pass operation. + */ + +METHODDEF int +dummy_consume_data (j_decompress_ptr cinfo) +{ + return JPEG_SUSPENDED; /* Always indicate nothing was done */ +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Consume input data and store it in the full-image coefficient buffer. + * We read as much as one fully interleaved MCU row ("iMCU" row) per call, + * ie, v_samp_factor block rows for each component in the scan. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + */ + +METHODDEF int +consume_data (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + cinfo->input_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Note: entropy decoder expects buffer to be zeroed, + * but this is handled automatically by the memory manager + * because we requested a pre-zeroed array. + */ + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to fetch the MCU. */ + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Decompress and return some data in the multi-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image. + */ + +METHODDEF int +decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num; + int ci, block_row, block_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number < cinfo->output_scan_number || + (cinfo->input_scan_number == cinfo->output_scan_number && + cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + cinfo->output_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + output_col = 0; + for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { + (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, + output_ptr, output_col); + buffer_ptr++; + output_col += compptr->DCT_scaled_size; + } + output_ptr += compptr->DCT_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +#ifdef BLOCK_SMOOTHING_SUPPORTED + +/* + * This code applies interblock smoothing as described by section K.8 + * of the JPEG standard: the first 5 AC coefficients are estimated from + * the DC values of a DCT block and its 8 neighboring blocks. + * We apply smoothing only for progressive JPEG decoding, and only if + * the coefficients it can estimate are not yet known to full precision. + */ + +/* + * Determine whether block smoothing is applicable and safe. + * We also latch the current states of the coef_bits[] entries for the + * AC coefficients; otherwise, if the input side of the decompressor + * advances into a new scan, we might think the coefficients are known + * more accurately than they really are. + */ + +LOCAL boolean +smoothing_ok (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + boolean smoothing_useful = FALSE; + int ci, coefi; + jpeg_component_info *compptr; + JQUANT_TBL * qtable; + int * coef_bits; + int * coef_bits_latch; + + if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) + return FALSE; + + /* Allocate latch area if not already done */ + if (coef->coef_bits_latch == NULL) + coef->coef_bits_latch = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * + (SAVED_COEFS * SIZEOF(int))); + coef_bits_latch = coef->coef_bits_latch; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* All components' quantization values must already be latched. */ + if ((qtable = compptr->quant_table) == NULL) + return FALSE; + /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ + for (coefi = 0; coefi <= 5; coefi++) { + if (qtable->quantval[coefi] == 0) + return FALSE; + } + /* DC values must be at least partly known for all components. */ + coef_bits = cinfo->coef_bits[ci]; + if (coef_bits[0] < 0) + return FALSE; + /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ + for (coefi = 1; coefi <= 5; coefi++) { + coef_bits_latch[coefi] = coef_bits[coefi]; + if (coef_bits[coefi] != 0) + smoothing_useful = TRUE; + } + coef_bits_latch += SAVED_COEFS; + } + + return smoothing_useful; +} + + +/* + * Variant of decompress_data for use when doing block smoothing. + */ + +METHODDEF int +decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num, last_block_column; + int ci, block_row, block_rows, access_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr, prev_block_row, next_block_row; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + boolean first_row, last_row; + JBLOCK workspace; + int *coef_bits; + JQUANT_TBL *quanttbl; + INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; + int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; + int Al, pred; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if (cinfo->input_scan_number == cinfo->output_scan_number) { + /* If input is working on current scan, we ordinarily want it to + * have completed the current row. But if input scan is DC, + * we want it to keep one row ahead so that next block row's DC + * values are up to date. + */ + JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; + if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) + break; + } + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) { + block_rows = compptr->v_samp_factor; + access_rows = block_rows * 2; /* this and next iMCU row */ + last_row = FALSE; + } else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + access_rows = block_rows; /* this iMCU row only */ + last_row = TRUE; + } + /* Align the virtual buffer for this component. */ + if (cinfo->output_iMCU_row > 0) { + access_rows += compptr->v_samp_factor; /* prior iMCU row too */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, + (JDIMENSION) access_rows, FALSE); + buffer += compptr->v_samp_factor; /* point to current iMCU row */ + first_row = FALSE; + } else { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); + first_row = TRUE; + } + /* Fetch component-dependent info */ + coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); + quanttbl = compptr->quant_table; + Q00 = quanttbl->quantval[0]; + Q01 = quanttbl->quantval[1]; + Q10 = quanttbl->quantval[2]; + Q20 = quanttbl->quantval[3]; + Q11 = quanttbl->quantval[4]; + Q02 = quanttbl->quantval[5]; + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + if (first_row && block_row == 0) + prev_block_row = buffer_ptr; + else + prev_block_row = buffer[block_row-1]; + if (last_row && block_row == block_rows-1) + next_block_row = buffer_ptr; + else + next_block_row = buffer[block_row+1]; + /* We fetch the surrounding DC values using a sliding-register approach. + * Initialize all nine here so as to do the right thing on narrow pics. + */ + DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; + DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; + DC7 = DC8 = DC9 = (int) next_block_row[0][0]; + output_col = 0; + last_block_column = compptr->width_in_blocks - 1; + for (block_num = 0; block_num <= last_block_column; block_num++) { + /* Fetch current DCT block into workspace so we can modify it. */ + jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); + /* Update DC values */ + if (block_num < last_block_column) { + DC3 = (int) prev_block_row[1][0]; + DC6 = (int) buffer_ptr[1][0]; + DC9 = (int) next_block_row[1][0]; + } + /* Compute coefficient estimates per K.8. + * An estimate is applied only if coefficient is still zero, + * and is not known to be fully accurate. + */ + /* AC01 */ + if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { + num = 36 * Q00 * (DC4 - DC6); + if (num >= 0) { + pred = (int) (((Q01<<7) + num) / (Q01<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q10<<7) + num) / (Q10<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q20<<7) + num) / (Q20<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q11<<7) + num) / (Q11<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q02<<7) + num) / (Q02<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_scaled_size; + } + output_ptr += compptr->DCT_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* BLOCK_SMOOTHING_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL void +jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_d_coef_controller *) coef; + coef->pub.start_input_pass = start_input_pass; + coef->pub.start_output_pass = start_output_pass; +#ifdef BLOCK_SMOOTHING_SUPPORTED + coef->coef_bits_latch = NULL; +#endif + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + /* Note we ask for a pre-zeroed array. */ + int ci, access_rows; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + access_rows = compptr->v_samp_factor; +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* If block smoothing could be used, need a bigger window */ + if (cinfo->progressive_mode) + access_rows *= 3; +#endif + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) access_rows); + } + coef->pub.consume_data = consume_data; + coef->pub.decompress_data = decompress_data; + coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->pub.consume_data = dummy_consume_data; + coef->pub.decompress_data = decompress_onepass; + coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ + } +} diff --git a/libs/jpeg6/jdcolor.cpp b/libs/jpeg6/jdcolor.cpp index d360b53..b2bdf6e 100755 --- a/libs/jpeg6/jdcolor.cpp +++ b/libs/jpeg6/jdcolor.cpp @@ -1,367 +1,367 @@ -/* - * jdcolor.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains output colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private subobject */ - -typedef struct { - struct jpeg_color_deconverter pub; /* public fields */ - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - INT32 * Cb_g_tab; /* => table for Cb to G conversion */ -} my_color_deconverter; - -typedef my_color_deconverter * my_cconvert_ptr; - - -/**************** YCbCr -> RGB conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * R = Y + 1.40200 * Cr - * G = Y - 0.34414 * Cb - 0.71414 * Cr - * B = Y + 1.77200 * Cb - * where Cb and Cr represent the incoming values less CENTERJSAMPLE. - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * Notice that Y, being an integral input, does not contribute any fraction - * so it need not participate in the rounding. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times Cb and Cr for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The Cr=>R and Cb=>B values can be rounded to integers in advance; the - * values for the G calculation are left scaled up, since we must add them - * together before rounding. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. - */ - -LOCAL void -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - int i; - INT32 x; - SHIFT_TEMPS - - cconvert->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cr_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - cconvert->Cb_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - cconvert->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - cconvert->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Convert some rows of samples to the output colorspace. - * - * Note that we change from noninterleaved, one-plane-per-component format - * to interleaved-pixel format. The output buffer is therefore three times - * as wide as the input buffer. - * A starting row offset is provided only for the input buffer. The caller - * can easily adjust the passed output_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF void -ycc_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; - outptr[RGB_GREEN] = range_limit[y + - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS))]; - outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/**************** Cases other than YCbCr -> RGB **************/ - - -/* - * Color conversion for no colorspace change: just copy the data, - * converting from separate-planes to interleaved representation. - */ - -METHODDEF void -null_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION count; - register int num_components = cinfo->num_components; - JDIMENSION num_cols = cinfo->output_width; - int ci; - - while (--num_rows >= 0) { - for (ci = 0; ci < num_components; ci++) { - inptr = input_buf[ci][input_row]; - outptr = output_buf[0] + ci; - for (count = num_cols; count > 0; count--) { - *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ - outptr += num_components; - } - } - input_row++; - output_buf++; - } -} - - -/* - * Color conversion for grayscale: just copy the data. - * This also works for YCbCr -> grayscale conversion, in which - * we just copy the Y (luminance) component and ignore chrominance. - */ - -METHODDEF void -grayscale_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, - num_rows, cinfo->output_width); -} - - -/* - * Adobe-style YCCK->CMYK conversion. - * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same - * conversion as above, while passing K (black) unchanged. - * We assume build_ycc_rgb_table has been called. - */ - -METHODDEF void -ycck_cmyk_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2, inptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - inptr3 = input_buf[3][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ - outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS)))]; - outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ - /* K passes through unchanged */ - outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ - outptr += 4; - } - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF void -start_pass_dcolor (j_decompress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for output colorspace conversion. - */ - -GLOBAL void -jinit_color_deconverter (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - int ci; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_deconverter)); - cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; - cconvert->pub.start_pass = start_pass_dcolor; - - /* Make sure num_components agrees with jpeg_color_space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_RGB: - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->num_components < 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - } - - /* Set out_color_components and conversion method based on requested space. - * Also clear the component_needed flags for any unused components, - * so that earlier pipeline stages can avoid useless computation. - */ - - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - if (cinfo->jpeg_color_space == JCS_GRAYSCALE || - cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = grayscale_convert; - /* For color->grayscale conversion, only the Y (0) component is needed */ - for (ci = 1; ci < cinfo->num_components; ci++) - cinfo->comp_info[ci].component_needed = FALSE; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - cinfo->out_color_components = RGB_PIXELSIZE; - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgb_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - cinfo->out_color_components = 4; - if (cinfo->jpeg_color_space == JCS_YCCK) { - cconvert->pub.color_convert = ycck_cmyk_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_CMYK) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: - /* Permit null conversion to same output space */ - if (cinfo->out_color_space == cinfo->jpeg_color_space) { - cinfo->out_color_components = cinfo->num_components; - cconvert->pub.color_convert = null_convert; - } else /* unsupported non-null conversion */ - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - } - - if (cinfo->quantize_colors) - cinfo->output_components = 1; /* single colormapped output component */ - else - cinfo->output_components = cinfo->out_color_components; -} +/* + * jdcolor.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains output colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_deconverter pub; /* public fields */ + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ +} my_color_deconverter; + +typedef my_color_deconverter * my_cconvert_ptr; + + +/**************** YCbCr -> RGB conversion: most common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * R = Y + 1.40200 * Cr + * G = Y - 0.34414 * Cb - 0.71414 * Cr + * B = Y + 1.77200 * Cb + * where Cb and Cr represent the incoming values less CENTERJSAMPLE. + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * Notice that Y, being an integral input, does not contribute any fraction + * so it need not participate in the rounding. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times Cb and Cr for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The Cr=>R and Cb=>B values can be rounded to integers in advance; the + * values for the G calculation are left scaled up, since we must add them + * together before rounding. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. + */ + +LOCAL void +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + cconvert->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + cconvert->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * + * Note that we change from noninterleaved, one-plane-per-component format + * to interleaved-pixel format. The output buffer is therefore three times + * as wide as the input buffer. + * A starting row offset is provided only for the input buffer. The caller + * can easily adjust the passed output_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF void +ycc_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; + outptr[RGB_GREEN] = range_limit[y + + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS))]; + outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than YCbCr -> RGB **************/ + + +/* + * Color conversion for no colorspace change: just copy the data, + * converting from separate-planes to interleaved representation. + */ + +METHODDEF void +null_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW inptr, outptr; + register JDIMENSION count; + register int num_components = cinfo->num_components; + JDIMENSION num_cols = cinfo->output_width; + int ci; + + while (--num_rows >= 0) { + for (ci = 0; ci < num_components; ci++) { + inptr = input_buf[ci][input_row]; + outptr = output_buf[0] + ci; + for (count = num_cols; count > 0; count--) { + *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ + outptr += num_components; + } + } + input_row++; + output_buf++; + } +} + + +/* + * Color conversion for grayscale: just copy the data. + * This also works for YCbCr -> grayscale conversion, in which + * we just copy the Y (luminance) component and ignore chrominance. + */ + +METHODDEF void +grayscale_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, + num_rows, cinfo->output_width); +} + + +/* + * Adobe-style YCCK->CMYK conversion. + * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same + * conversion as above, while passing K (black) unchanged. + * We assume build_ycc_rgb_table has been called. + */ + +METHODDEF void +ycck_cmyk_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2, inptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + inptr3 = input_buf[3][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ + outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS)))]; + outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ + /* K passes through unchanged */ + outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ + outptr += 4; + } + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF void +start_pass_dcolor (j_decompress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for output colorspace conversion. + */ + +GLOBAL void +jinit_color_deconverter (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + int ci; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_deconverter)); + cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; + cconvert->pub.start_pass = start_pass_dcolor; + + /* Make sure num_components agrees with jpeg_color_space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_RGB: + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->num_components < 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + } + + /* Set out_color_components and conversion method based on requested space. + * Also clear the component_needed flags for any unused components, + * so that earlier pipeline stages can avoid useless computation. + */ + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + if (cinfo->jpeg_color_space == JCS_GRAYSCALE || + cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = grayscale_convert; + /* For color->grayscale conversion, only the Y (0) component is needed */ + for (ci = 1; ci < cinfo->num_components; ci++) + cinfo->comp_info[ci].component_needed = FALSE; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + if (cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = ycc_rgb_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + cinfo->out_color_components = 4; + if (cinfo->jpeg_color_space == JCS_YCCK) { + cconvert->pub.color_convert = ycck_cmyk_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_CMYK) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: + /* Permit null conversion to same output space */ + if (cinfo->out_color_space == cinfo->jpeg_color_space) { + cinfo->out_color_components = cinfo->num_components; + cconvert->pub.color_convert = null_convert; + } else /* unsupported non-null conversion */ + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + + if (cinfo->quantize_colors) + cinfo->output_components = 1; /* single colormapped output component */ + else + cinfo->output_components = cinfo->out_color_components; +} diff --git a/libs/jpeg6/jdct.h b/libs/jpeg6/jdct.h index 1d66d4f..3ce790b 100755 --- a/libs/jpeg6/jdct.h +++ b/libs/jpeg6/jdct.h @@ -1,176 +1,176 @@ -/* - * jdct.h - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file contains common declarations for the forward and - * inverse DCT modules. These declarations are private to the DCT managers - * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. - * The individual DCT algorithms are kept in separate files to ease - * machine-dependent tuning (e.g., assembly coding). - */ - - -/* - * A forward DCT routine is given a pointer to a work area of type DCTELEM[]; - * the DCT is to be performed in-place in that buffer. Type DCTELEM is int - * for 8-bit samples, INT32 for 12-bit samples. (NOTE: Floating-point DCT - * implementations use an array of type FAST_FLOAT, instead.) - * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE). - * The DCT outputs are returned scaled up by a factor of 8; they therefore - * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This - * convention improves accuracy in integer implementations and saves some - * work in floating-point ones. - * Quantization of the output coefficients is done by jcdctmgr.c. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef int DCTELEM; /* 16 or 32 bits is fine */ -#else -typedef INT32 DCTELEM; /* must have 32 bits */ -#endif - -typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data)); -typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data)); - - -/* - * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer - * to an output sample array. The routine must dequantize the input data as - * well as perform the IDCT; for dequantization, it uses the multiplier table - * pointed to by compptr->dct_table. The output data is to be placed into the - * sample array starting at a specified column. (Any row offset needed will - * be applied to the array pointer before it is passed to the IDCT code.) - * Note that the number of samples emitted by the IDCT routine is - * DCT_scaled_size * DCT_scaled_size. - */ - -/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ - -/* - * Each IDCT routine has its own ideas about the best dct_table element type. - */ - -typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ -#if BITS_IN_JSAMPLE == 8 -typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ -#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ -#else -typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ -#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ -#endif -typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ - - -/* - * Each IDCT routine is responsible for range-limiting its results and - * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could - * be quite far out of range if the input data is corrupt, so a bulletproof - * range-limiting step is required. We use a mask-and-table-lookup method - * to do the combined operations quickly. See the comments with - * prepare_range_limit_table (in jdmaster.c) for more info. - */ - -#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) - -#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_fdct_islow jFDislow -#define jpeg_fdct_ifast jFDifast -#define jpeg_fdct_float jFDfloat -#define jpeg_idct_islow jRDislow -#define jpeg_idct_ifast jRDifast -#define jpeg_idct_float jRDfloat -#define jpeg_idct_4x4 jRD4x4 -#define jpeg_idct_2x2 jRD2x2 -#define jpeg_idct_1x1 jRD1x1 -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Extern declarations for the forward and inverse DCT routines. */ - -EXTERN void jpeg_fdct_islow JPP((DCTELEM * data)); -EXTERN void jpeg_fdct_ifast JPP((DCTELEM * data)); -EXTERN void jpeg_fdct_float JPP((FAST_FLOAT * data)); - -EXTERN void jpeg_idct_islow - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_ifast - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_float - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_4x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_2x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_1x1 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); - - -/* - * Macros for handling fixed-point arithmetic; these are used by many - * but not all of the DCT/IDCT modules. - * - * All values are expected to be of type INT32. - * Fractional constants are scaled left by CONST_BITS bits. - * CONST_BITS is defined within each module using these macros, - * and may differ from one module to the next. - */ - -#define ONE ((INT32) 1) -#define CONST_SCALE (ONE << CONST_BITS) - -/* Convert a positive real constant to an integer scaled by CONST_SCALE. - * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, - * thus causing a lot of useless floating-point operations at run time. - */ - -#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) - -/* Descale and correctly round an INT32 value that's scaled by N bits. - * We assume RIGHT_SHIFT rounds towards minus infinity, so adding - * the fudge factor is correct for either sign of X. - */ - -#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * This macro is used only when the two inputs will actually be no more than - * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a - * full 32x32 multiply. This provides a useful speedup on many machines. - * Unfortunately there is no way to specify a 16x16->32 multiply portably - * in C, but some C compilers will do the right thing if you provide the - * correct combination of casts. - */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) -#endif -#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) -#endif - -#ifndef MULTIPLY16C16 /* default definition */ -#define MULTIPLY16C16(var,const) ((var) * (const)) -#endif - -/* Same except both inputs are variables. */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) -#endif - -#ifndef MULTIPLY16V16 /* default definition */ -#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) -#endif +/* + * jdct.h + * + * Copyright (C) 1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file contains common declarations for the forward and + * inverse DCT modules. These declarations are private to the DCT managers + * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. + * The individual DCT algorithms are kept in separate files to ease + * machine-dependent tuning (e.g., assembly coding). + */ + + +/* + * A forward DCT routine is given a pointer to a work area of type DCTELEM[]; + * the DCT is to be performed in-place in that buffer. Type DCTELEM is int + * for 8-bit samples, INT32 for 12-bit samples. (NOTE: Floating-point DCT + * implementations use an array of type FAST_FLOAT, instead.) + * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE). + * The DCT outputs are returned scaled up by a factor of 8; they therefore + * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This + * convention improves accuracy in integer implementations and saves some + * work in floating-point ones. + * Quantization of the output coefficients is done by jcdctmgr.c. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef int DCTELEM; /* 16 or 32 bits is fine */ +#else +typedef INT32 DCTELEM; /* must have 32 bits */ +#endif + +typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data)); +typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data)); + + +/* + * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer + * to an output sample array. The routine must dequantize the input data as + * well as perform the IDCT; for dequantization, it uses the multiplier table + * pointed to by compptr->dct_table. The output data is to be placed into the + * sample array starting at a specified column. (Any row offset needed will + * be applied to the array pointer before it is passed to the IDCT code.) + * Note that the number of samples emitted by the IDCT routine is + * DCT_scaled_size * DCT_scaled_size. + */ + +/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ + +/* + * Each IDCT routine has its own ideas about the best dct_table element type. + */ + +typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ +#if BITS_IN_JSAMPLE == 8 +typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ +#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ +#else +typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ +#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ +#endif +typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ + + +/* + * Each IDCT routine is responsible for range-limiting its results and + * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could + * be quite far out of range if the input data is corrupt, so a bulletproof + * range-limiting step is required. We use a mask-and-table-lookup method + * to do the combined operations quickly. See the comments with + * prepare_range_limit_table (in jdmaster.c) for more info. + */ + +#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) + +#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_fdct_islow jFDislow +#define jpeg_fdct_ifast jFDifast +#define jpeg_fdct_float jFDfloat +#define jpeg_idct_islow jRDislow +#define jpeg_idct_ifast jRDifast +#define jpeg_idct_float jRDfloat +#define jpeg_idct_4x4 jRD4x4 +#define jpeg_idct_2x2 jRD2x2 +#define jpeg_idct_1x1 jRD1x1 +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Extern declarations for the forward and inverse DCT routines. */ + +EXTERN void jpeg_fdct_islow JPP((DCTELEM * data)); +EXTERN void jpeg_fdct_ifast JPP((DCTELEM * data)); +EXTERN void jpeg_fdct_float JPP((FAST_FLOAT * data)); + +EXTERN void jpeg_idct_islow + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN void jpeg_idct_ifast + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN void jpeg_idct_float + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN void jpeg_idct_4x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN void jpeg_idct_2x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN void jpeg_idct_1x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); + + +/* + * Macros for handling fixed-point arithmetic; these are used by many + * but not all of the DCT/IDCT modules. + * + * All values are expected to be of type INT32. + * Fractional constants are scaled left by CONST_BITS bits. + * CONST_BITS is defined within each module using these macros, + * and may differ from one module to the next. + */ + +#define ONE ((INT32) 1) +#define CONST_SCALE (ONE << CONST_BITS) + +/* Convert a positive real constant to an integer scaled by CONST_SCALE. + * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, + * thus causing a lot of useless floating-point operations at run time. + */ + +#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) + +/* Descale and correctly round an INT32 value that's scaled by N bits. + * We assume RIGHT_SHIFT rounds towards minus infinity, so adding + * the fudge factor is correct for either sign of X. + */ + +#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * This macro is used only when the two inputs will actually be no more than + * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a + * full 32x32 multiply. This provides a useful speedup on many machines. + * Unfortunately there is no way to specify a 16x16->32 multiply portably + * in C, but some C compilers will do the right thing if you provide the + * correct combination of casts. + */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) +#endif +#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) +#endif + +#ifndef MULTIPLY16C16 /* default definition */ +#define MULTIPLY16C16(var,const) ((var) * (const)) +#endif + +/* Same except both inputs are variables. */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) +#endif + +#ifndef MULTIPLY16V16 /* default definition */ +#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) +#endif diff --git a/libs/jpeg6/jddctmgr.cpp b/libs/jpeg6/jddctmgr.cpp index ba01fc6..71215f1 100755 --- a/libs/jpeg6/jddctmgr.cpp +++ b/libs/jpeg6/jddctmgr.cpp @@ -1,270 +1,270 @@ -/* - * jddctmgr.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the inverse-DCT management logic. - * This code selects a particular IDCT implementation to be used, - * and it performs related housekeeping chores. No code in this file - * is executed per IDCT step, only during output pass setup. - * - * Note that the IDCT routines are responsible for performing coefficient - * dequantization as well as the IDCT proper. This module sets up the - * dequantization multiplier table needed by the IDCT routine. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - - -/* - * The decompressor input side (jdinput.c) saves away the appropriate - * quantization table for each component at the start of the first scan - * involving that component. (This is necessary in order to correctly - * decode files that reuse Q-table slots.) - * When we are ready to make an output pass, the saved Q-table is converted - * to a multiplier table that will actually be used by the IDCT routine. - * The multiplier table contents are IDCT-method-dependent. To support - * application changes in IDCT method between scans, we can remake the - * multiplier tables if necessary. - * In buffered-image mode, the first output pass may occur before any data - * has been seen for some components, and thus before their Q-tables have - * been saved away. To handle this case, multiplier tables are preset - * to zeroes; the result of the IDCT will be a neutral gray level. - */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_inverse_dct pub; /* public fields */ - - /* This array contains the IDCT method code that each multiplier table - * is currently set up for, or -1 if it's not yet set up. - * The actual multiplier tables are pointed to by dct_table in the - * per-component comp_info structures. - */ - int cur_method[MAX_COMPONENTS]; -} my_idct_controller; - -typedef my_idct_controller * my_idct_ptr; - - -/* Allocated multiplier tables: big enough for any supported variant */ - -typedef union { - ISLOW_MULT_TYPE islow_array[DCTSIZE2]; -#ifdef DCT_IFAST_SUPPORTED - IFAST_MULT_TYPE ifast_array[DCTSIZE2]; -#endif -#ifdef DCT_FLOAT_SUPPORTED - FLOAT_MULT_TYPE float_array[DCTSIZE2]; -#endif -} multiplier_table; - - -/* The current scaled-IDCT routines require ISLOW-style multiplier tables, - * so be sure to compile that code if either ISLOW or SCALING is requested. - */ -#ifdef DCT_ISLOW_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#else -#ifdef IDCT_SCALING_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#endif -#endif - - -/* - * Prepare for an output pass. - * Here we select the proper IDCT routine for each component and build - * a matching multiplier table. - */ - -METHODDEF void -start_pass (j_decompress_ptr cinfo) -{ - my_idct_ptr idct = (my_idct_ptr) cinfo->idct; - int ci, i; - jpeg_component_info *compptr; - int method = 0; - inverse_DCT_method_ptr method_ptr = NULL; - JQUANT_TBL * qtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Select the proper IDCT routine for this component's scaling */ - switch (compptr->DCT_scaled_size) { -#ifdef IDCT_SCALING_SUPPORTED - case 1: - method_ptr = jpeg_idct_1x1; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; - case 2: - method_ptr = jpeg_idct_2x2; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; - case 4: - method_ptr = jpeg_idct_4x4; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; -#endif - case DCTSIZE: - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - method_ptr = jpeg_idct_islow; - method = JDCT_ISLOW; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - method_ptr = jpeg_idct_ifast; - method = JDCT_IFAST; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - method_ptr = jpeg_idct_float; - method = JDCT_FLOAT; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - break; - default: - ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); - break; - } - idct->pub.inverse_DCT[ci] = method_ptr; - /* Create multiplier table from quant table. - * However, we can skip this if the component is uninteresting - * or if we already built the table. Also, if no quant table - * has yet been saved for the component, we leave the - * multiplier table all-zero; we'll be reading zeroes from the - * coefficient controller's buffer anyway. - */ - if (! compptr->component_needed || idct->cur_method[ci] == method) - continue; - qtbl = compptr->quant_table; - if (qtbl == NULL) /* happens if no data yet for component */ - continue; - idct->cur_method[ci] = method; - switch (method) { -#ifdef PROVIDE_ISLOW_TABLES - case JDCT_ISLOW: - { - /* For LL&M IDCT method, multipliers are equal to raw quantization - * coefficients, but are stored in natural order as ints. - */ - ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; - for (i = 0; i < DCTSIZE2; i++) { - ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[jpeg_zigzag_order[i]]; - } - } - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * For integer operation, the multiplier table is to be scaled by - * IFAST_SCALE_BITS. The multipliers are stored in natural order. - */ - IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - for (i = 0; i < DCTSIZE2; i++) { - ifmtbl[i] = (IFAST_MULT_TYPE) - DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[jpeg_zigzag_order[i]], - (INT32) aanscales[i]), - CONST_BITS-IFAST_SCALE_BITS); - } - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * The multipliers are stored in natural order. - */ - FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fmtbl[i] = (FLOAT_MULT_TYPE) - ((double) qtbl->quantval[jpeg_zigzag_order[i]] * - aanscalefactor[row] * aanscalefactor[col]); - i++; - } - } - } - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Initialize IDCT manager. - */ - -GLOBAL void -jinit_inverse_dct (j_decompress_ptr cinfo) -{ - my_idct_ptr idct; - int ci; - jpeg_component_info *compptr; - - idct = (my_idct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_idct_controller)); - cinfo->idct = (struct jpeg_inverse_dct *) idct; - idct->pub.start_pass = start_pass; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate and pre-zero a multiplier table for each component */ - compptr->dct_table = - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(multiplier_table)); - MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); - /* Mark multiplier table not yet set up for any method */ - idct->cur_method[ci] = -1; - } -} +/* + * jddctmgr.c + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF void +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch (compptr->DCT_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case 1: + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; + case 2: + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; + case 4: + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; +#endif + case DCTSIZE: + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored in natural order as ints. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[jpeg_zigzag_order[i]]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. The multipliers are stored in natural order. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[jpeg_zigzag_order[i]], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * The multipliers are stored in natural order. + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[jpeg_zigzag_order[i]] * + aanscalefactor[row] * aanscalefactor[col]); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL void +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = (struct jpeg_inverse_dct *) idct; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} diff --git a/libs/jpeg6/jdhuff.cpp b/libs/jpeg6/jdhuff.cpp index db42772..95174b1 100755 --- a/libs/jpeg6/jdhuff.cpp +++ b/libs/jpeg6/jdhuff.cpp @@ -1,574 +1,574 @@ -/* - * jdhuff.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdphuff.c */ - - -/* - * Expanded entropy decoder object for Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; -} huff_entropy_decoder; - -typedef huff_entropy_decoder * huff_entropy_ptr; - - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF void -start_pass_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - - /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. - * This ought to be an error condition, but we make it a warning because - * there are some baseline files out there with all zeroes in these bytes. - */ - if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 || - cinfo->Ah != 0 || cinfo->Al != 0) - WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - /* Make sure requested tables are present */ - if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS || - cinfo->dc_huff_tbl_ptrs[dctbl] == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); - if (actbl < 0 || actbl >= NUM_HUFF_TBLS || - cinfo->ac_huff_tbl_ptrs[actbl] == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[dctbl], - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[actbl], - & entropy->ac_derived_tbls[actbl]); - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->bitstate.printed_eod = FALSE; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Compute the derived values for a Huffman table. - * Note this is also used by jdphuff.c. - */ - -GLOBAL void -jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl, - d_derived_tbl ** pdtbl) -{ - d_derived_tbl *dtbl; - int p, i, l, si; - int lookbits, ctr; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (d_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(d_derived_tbl)); - dtbl = *pdtbl; - dtbl->pub = htbl; /* fill in back link */ - - /* Figure C.1: make table of Huffman code length for each symbol */ - /* Note that this is in code-length order. */ - - p = 0; - for (l = 1; l <= 16; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - - /* Figure C.2: generate the codes themselves */ - /* Note that this is in code-length order. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - code <<= 1; - si++; - } - - /* Figure F.15: generate decoding tables for bit-sequential decoding */ - - p = 0; - for (l = 1; l <= 16; l++) { - if (htbl->bits[l]) { - dtbl->valptr[l] = p; /* huffval[] index of 1st symbol of code length l */ - dtbl->mincode[l] = huffcode[p]; /* minimum code of length l */ - p += htbl->bits[l]; - dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ - } else { - dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ - } - } - dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ - - /* Compute lookahead tables to speed up decoding. - * First we set all the table entries to 0, indicating "too long"; - * then we iterate through the Huffman codes that are short enough and - * fill in all the entries that correspond to bit sequences starting - * with that code. - */ - - MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); - - p = 0; - for (l = 1; l <= HUFF_LOOKAHEAD; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { - /* l = current code's length, p = its index in huffcode[] & huffval[]. */ - /* Generate left-justified code followed by all possible bit sequences */ - lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); - for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { - dtbl->look_nbits[lookbits] = l; - dtbl->look_sym[lookbits] = htbl->huffval[p]; - lookbits++; - } - } - } -} - - -/* - * Out-of-line code for bit fetching (shared with jdphuff.c). - * See jdhuff.h for info about usage. - * Note: current values of get_buffer and bits_left are passed as parameters, - * but are returned in the corresponding fields of the state struct. - * - * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width - * of get_buffer to be used. (On machines with wider words, an even larger - * buffer could be used.) However, on some machines 32-bit shifts are - * quite slow and take time proportional to the number of places shifted. - * (This is true with most PC compilers, for instance.) In this case it may - * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the - * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. - */ - -#ifdef SLOW_SHIFT_32 -#define MIN_GET_BITS 15 /* minimum allowable value */ -#else -#define MIN_GET_BITS (BIT_BUF_SIZE-7) -#endif - - -GLOBAL boolean -jpeg_fill_bit_buffer (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits) -/* Load up the bit buffer to a depth of at least nbits */ -{ - /* Copy heavily used state fields into locals (hopefully registers) */ - register const JOCTET * next_input_byte = state->next_input_byte; - register size_t bytes_in_buffer = state->bytes_in_buffer; - register int c; - - /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ - /* (It is assumed that no request will be for more than that many bits.) */ - - while (bits_left < MIN_GET_BITS) { - /* Attempt to read a byte */ - if (state->unread_marker != 0) - goto no_more_data; /* can't advance past a marker */ - - if (bytes_in_buffer == 0) { - if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo)) - return FALSE; - next_input_byte = state->cinfo->src->next_input_byte; - bytes_in_buffer = state->cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - - /* If it's 0xFF, check and discard stuffed zero byte */ - if (c == 0xFF) { - do { - if (bytes_in_buffer == 0) { - if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo)) - return FALSE; - next_input_byte = state->cinfo->src->next_input_byte; - bytes_in_buffer = state->cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - } while (c == 0xFF); - - if (c == 0) { - /* Found FF/00, which represents an FF data byte */ - c = 0xFF; - } else { - /* Oops, it's actually a marker indicating end of compressed data. */ - /* Better put it back for use later */ - state->unread_marker = c; - - no_more_data: - /* There should be enough bits still left in the data segment; */ - /* if so, just break out of the outer while loop. */ - if (bits_left >= nbits) - break; - /* Uh-oh. Report corrupted data to user and stuff zeroes into - * the data stream, so that we can produce some kind of image. - * Note that this code will be repeated for each byte demanded - * for the rest of the segment. We use a nonvolatile flag to ensure - * that only one warning message appears. - */ - if (! *(state->printed_eod_ptr)) { - WARNMS(state->cinfo, JWRN_HIT_MARKER); - *(state->printed_eod_ptr) = TRUE; - } - c = 0; /* insert a zero byte into bit buffer */ - } - } - - /* OK, load c into get_buffer */ - get_buffer = (get_buffer << 8) | c; - bits_left += 8; - } - - /* Unload the local registers */ - state->next_input_byte = next_input_byte; - state->bytes_in_buffer = bytes_in_buffer; - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - return TRUE; -} - - -/* - * Out-of-line code for Huffman code decoding. - * See jdhuff.h for info about usage. - */ - -GLOBAL int -jpeg_huff_decode (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits) -{ - register int l = min_bits; - register INT32 code; - - /* HUFF_DECODE has determined that the code is at least min_bits */ - /* bits long, so fetch that many bits in one swoop. */ - - CHECK_BIT_BUFFER(*state, l, return -1); - code = GET_BITS(l); - - /* Collect the rest of the Huffman code one bit at a time. */ - /* This is per Figure F.16 in the JPEG spec. */ - - while (code > htbl->maxcode[l]) { - code <<= 1; - CHECK_BIT_BUFFER(*state, 1, return -1); - code |= GET_BITS(1); - l++; - } - - /* Unload the local registers */ - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - /* With garbage input we may reach the sentinel value l = 17. */ - - if (l > 16) { - WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); - return 0; /* fake a zero as the safest result */ - } - - return htbl->pub->huffval[ htbl->valptr[l] + - ((int) (code - htbl->mincode[l])) ]; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL boolean -process_restart (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Next segment can get another out-of-data warning */ - entropy->bitstate.printed_eod = FALSE; - - return TRUE; -} - - -/* - * Decode and return one MCU's worth of Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER. - * (Wholesale zeroing is usually a little faster than retail...) - * - * Returns FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * this module, since we'll just re-assign them on the next call.) - */ - -METHODDEF boolean -decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int s, k, r; - int blkn, ci; - JBLOCKROW block; - BITREAD_STATE_VARS; - savable_state state; - d_derived_tbl * dctbl; - d_derived_tbl * actbl; - jpeg_component_info * compptr; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - dctbl = entropy->dc_derived_tbls[compptr->dc_tbl_no]; - actbl = entropy->ac_derived_tbls[compptr->ac_tbl_no]; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* Shortcut if component's values are not interesting */ - if (! compptr->component_needed) - goto skip_ACs; - - /* Convert DC difference to actual value, update last_dc_val */ - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */ - (*block)[0] = (JCOEF) s; - - /* Do we need to decode the AC coefficients for this component? */ - if (compptr->DCT_scaled_size > 1) { - - /* Section F.2.2.2: decode the AC coefficients */ - /* Since zeroes are skipped, output area must be cleared beforehand */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label2); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Output coefficient in natural (dezigzagged) order. - * Note: the extra entries in jpeg_natural_order[] will save us - * if k >= DCTSIZE2, which could happen if the data is corrupted. - */ - (*block)[jpeg_natural_order[k]] = (JCOEF) s; - } else { - if (r != 15) - break; - k += 15; - } - } - - } else { -skip_ACs: - - /* Section F.2.2.2: decode the AC coefficients */ - /* In this path we just discard the values */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - - } - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * Module initialization routine for Huffman entropy decoding. - */ - -GLOBAL void -jinit_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_huff_decoder; - entropy->pub.decode_mcu = decode_mcu; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; - } -} +/* + * jdhuff.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdhuff.h" /* Declarations shared with jdphuff.c */ + + +/* + * Expanded entropy decoder object for Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; +} huff_entropy_decoder; + +typedef huff_entropy_decoder * huff_entropy_ptr; + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF void +start_pass_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, dctbl, actbl; + jpeg_component_info * compptr; + + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning because + * there are some baseline files out there with all zeroes in these bytes. + */ + if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 || + cinfo->Ah != 0 || cinfo->Al != 0) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + dctbl = compptr->dc_tbl_no; + actbl = compptr->ac_tbl_no; + /* Make sure requested tables are present */ + if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS || + cinfo->dc_huff_tbl_ptrs[dctbl] == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); + if (actbl < 0 || actbl >= NUM_HUFF_TBLS || + cinfo->ac_huff_tbl_ptrs[actbl] == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[dctbl], + & entropy->dc_derived_tbls[dctbl]); + jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[actbl], + & entropy->ac_derived_tbls[actbl]); + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->bitstate.printed_eod = FALSE; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Compute the derived values for a Huffman table. + * Note this is also used by jdphuff.c. + */ + +GLOBAL void +jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl, + d_derived_tbl ** pdtbl) +{ + d_derived_tbl *dtbl; + int p, i, l, si; + int lookbits, ctr; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (d_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(d_derived_tbl)); + dtbl = *pdtbl; + dtbl->pub = htbl; /* fill in back link */ + + /* Figure C.1: make table of Huffman code length for each symbol */ + /* Note that this is in code-length order. */ + + p = 0; + for (l = 1; l <= 16; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + + /* Figure C.2: generate the codes themselves */ + /* Note that this is in code-length order. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + code <<= 1; + si++; + } + + /* Figure F.15: generate decoding tables for bit-sequential decoding */ + + p = 0; + for (l = 1; l <= 16; l++) { + if (htbl->bits[l]) { + dtbl->valptr[l] = p; /* huffval[] index of 1st symbol of code length l */ + dtbl->mincode[l] = huffcode[p]; /* minimum code of length l */ + p += htbl->bits[l]; + dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ + } else { + dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ + } + } + dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ + + /* Compute lookahead tables to speed up decoding. + * First we set all the table entries to 0, indicating "too long"; + * then we iterate through the Huffman codes that are short enough and + * fill in all the entries that correspond to bit sequences starting + * with that code. + */ + + MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); + + p = 0; + for (l = 1; l <= HUFF_LOOKAHEAD; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { + /* l = current code's length, p = its index in huffcode[] & huffval[]. */ + /* Generate left-justified code followed by all possible bit sequences */ + lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); + for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { + dtbl->look_nbits[lookbits] = l; + dtbl->look_sym[lookbits] = htbl->huffval[p]; + lookbits++; + } + } + } +} + + +/* + * Out-of-line code for bit fetching (shared with jdphuff.c). + * See jdhuff.h for info about usage. + * Note: current values of get_buffer and bits_left are passed as parameters, + * but are returned in the corresponding fields of the state struct. + * + * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width + * of get_buffer to be used. (On machines with wider words, an even larger + * buffer could be used.) However, on some machines 32-bit shifts are + * quite slow and take time proportional to the number of places shifted. + * (This is true with most PC compilers, for instance.) In this case it may + * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the + * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. + */ + +#ifdef SLOW_SHIFT_32 +#define MIN_GET_BITS 15 /* minimum allowable value */ +#else +#define MIN_GET_BITS (BIT_BUF_SIZE-7) +#endif + + +GLOBAL boolean +jpeg_fill_bit_buffer (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits) +/* Load up the bit buffer to a depth of at least nbits */ +{ + /* Copy heavily used state fields into locals (hopefully registers) */ + register const JOCTET * next_input_byte = state->next_input_byte; + register size_t bytes_in_buffer = state->bytes_in_buffer; + register int c; + + /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ + /* (It is assumed that no request will be for more than that many bits.) */ + + while (bits_left < MIN_GET_BITS) { + /* Attempt to read a byte */ + if (state->unread_marker != 0) + goto no_more_data; /* can't advance past a marker */ + + if (bytes_in_buffer == 0) { + if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo)) + return FALSE; + next_input_byte = state->cinfo->src->next_input_byte; + bytes_in_buffer = state->cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + + /* If it's 0xFF, check and discard stuffed zero byte */ + if (c == 0xFF) { + do { + if (bytes_in_buffer == 0) { + if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo)) + return FALSE; + next_input_byte = state->cinfo->src->next_input_byte; + bytes_in_buffer = state->cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + } while (c == 0xFF); + + if (c == 0) { + /* Found FF/00, which represents an FF data byte */ + c = 0xFF; + } else { + /* Oops, it's actually a marker indicating end of compressed data. */ + /* Better put it back for use later */ + state->unread_marker = c; + + no_more_data: + /* There should be enough bits still left in the data segment; */ + /* if so, just break out of the outer while loop. */ + if (bits_left >= nbits) + break; + /* Uh-oh. Report corrupted data to user and stuff zeroes into + * the data stream, so that we can produce some kind of image. + * Note that this code will be repeated for each byte demanded + * for the rest of the segment. We use a nonvolatile flag to ensure + * that only one warning message appears. + */ + if (! *(state->printed_eod_ptr)) { + WARNMS(state->cinfo, JWRN_HIT_MARKER); + *(state->printed_eod_ptr) = TRUE; + } + c = 0; /* insert a zero byte into bit buffer */ + } + } + + /* OK, load c into get_buffer */ + get_buffer = (get_buffer << 8) | c; + bits_left += 8; + } + + /* Unload the local registers */ + state->next_input_byte = next_input_byte; + state->bytes_in_buffer = bytes_in_buffer; + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + return TRUE; +} + + +/* + * Out-of-line code for Huffman code decoding. + * See jdhuff.h for info about usage. + */ + +GLOBAL int +jpeg_huff_decode (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits) +{ + register int l = min_bits; + register INT32 code; + + /* HUFF_DECODE has determined that the code is at least min_bits */ + /* bits long, so fetch that many bits in one swoop. */ + + CHECK_BIT_BUFFER(*state, l, return -1); + code = GET_BITS(l); + + /* Collect the rest of the Huffman code one bit at a time. */ + /* This is per Figure F.16 in the JPEG spec. */ + + while (code > htbl->maxcode[l]) { + code <<= 1; + CHECK_BIT_BUFFER(*state, 1, return -1); + code |= GET_BITS(1); + l++; + } + + /* Unload the local registers */ + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + /* With garbage input we may reach the sentinel value l = 17. */ + + if (l > 16) { + WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); + return 0; /* fake a zero as the safest result */ + } + + return htbl->pub->huffval[ htbl->valptr[l] + + ((int) (code - htbl->mincode[l])) ]; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and add will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) + +#else + +#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) + +static const int extend_test[16] = /* entry n is 2**(n-1) */ + { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, + 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; + +static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ + { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, + ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, + ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, + ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; + +#endif /* AVOID_TABLES */ + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL boolean +process_restart (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Next segment can get another out-of-data warning */ + entropy->bitstate.printed_eod = FALSE; + + return TRUE; +} + + +/* + * Decode and return one MCU's worth of Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER. + * (Wholesale zeroing is usually a little faster than retail...) + * + * Returns FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * this module, since we'll just re-assign them on the next call.) + */ + +METHODDEF boolean +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl * dctbl; + d_derived_tbl * actbl; + jpeg_component_info * compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + dctbl = entropy->dc_derived_tbls[compptr->dc_tbl_no]; + actbl = entropy->ac_derived_tbls[compptr->ac_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Shortcut if component's values are not interesting */ + if (! compptr->component_needed) + goto skip_ACs; + + /* Convert DC difference to actual value, update last_dc_val */ + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */ + (*block)[0] = (JCOEF) s; + + /* Do we need to decode the AC coefficients for this component? */ + if (compptr->DCT_scaled_size > 1) { + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (k = 1; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, actbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in jpeg_natural_order[] will save us + * if k >= DCTSIZE2, which could happen if the data is corrupted. + */ + (*block)[jpeg_natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + break; + k += 15; + } + } + + } else { +skip_ACs: + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (k = 1; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, actbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + } + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Module initialization routine for Huffman entropy decoding. + */ + +GLOBAL void +jinit_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_decoder)); + cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; + entropy->pub.start_pass = start_pass_huff_decoder; + entropy->pub.decode_mcu = decode_mcu; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + } +} diff --git a/libs/jpeg6/jdhuff.h b/libs/jpeg6/jdhuff.h index 65f3054..d375c78 100755 --- a/libs/jpeg6/jdhuff.h +++ b/libs/jpeg6/jdhuff.h @@ -1,202 +1,202 @@ -/* - * jdhuff.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy decoding routines - * that are shared between the sequential decoder (jdhuff.c) and the - * progressive decoder (jdphuff.c). No other modules need to see these. - */ - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_d_derived_tbl jMkDDerived -#define jpeg_fill_bit_buffer jFilBitBuf -#define jpeg_huff_decode jHufDecode -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Derived data constructed for each Huffman table */ - -#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ - -typedef struct { - /* Basic tables: (element [0] of each array is unused) */ - INT32 mincode[17]; /* smallest code of length k */ - INT32 maxcode[18]; /* largest code of length k (-1 if none) */ - /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ - int valptr[17]; /* huffval[] index of 1st symbol of length k */ - - /* Link to public Huffman table (needed only in jpeg_huff_decode) */ - JHUFF_TBL *pub; - - /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of - * the input data stream. If the next Huffman code is no more - * than HUFF_LOOKAHEAD bits long, we can obtain its length and - * the corresponding symbol directly from these tables. - */ - int look_nbits[1< 32 bits on your machine, and shifting/masking longs is - * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE - * appropriately should be a win. Unfortunately we can't do this with - * something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) - * because not all machines measure sizeof in 8-bit bytes. - */ - -typedef struct { /* Bitreading state saved across MCUs */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - boolean printed_eod; /* flag to suppress multiple warning msgs */ -} bitread_perm_state; - -typedef struct { /* Bitreading working state within an MCU */ - /* current data source state */ - const JOCTET * next_input_byte; /* => next byte to read from source */ - size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ - int unread_marker; /* nonzero if we have hit a marker */ - /* bit input buffer --- note these values are kept in register variables, - * not in this struct, inside the inner loops. - */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - /* pointers needed by jpeg_fill_bit_buffer */ - j_decompress_ptr cinfo; /* back link to decompress master record */ - boolean * printed_eod_ptr; /* => flag in permanent state */ -} bitread_working_state; - -/* Macros to declare and load/save bitread local variables. */ -#define BITREAD_STATE_VARS \ - register bit_buf_type get_buffer; \ - register int bits_left; \ - bitread_working_state br_state - -#define BITREAD_LOAD_STATE(cinfop,permstate) \ - br_state.cinfo = cinfop; \ - br_state.next_input_byte = cinfop->src->next_input_byte; \ - br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ - br_state.unread_marker = cinfop->unread_marker; \ - get_buffer = permstate.get_buffer; \ - bits_left = permstate.bits_left; \ - br_state.printed_eod_ptr = & permstate.printed_eod - -#define BITREAD_SAVE_STATE(cinfop,permstate) \ - cinfop->src->next_input_byte = br_state.next_input_byte; \ - cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ - cinfop->unread_marker = br_state.unread_marker; \ - permstate.get_buffer = get_buffer; \ - permstate.bits_left = bits_left - -/* - * These macros provide the in-line portion of bit fetching. - * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer - * before using GET_BITS, PEEK_BITS, or DROP_BITS. - * The variables get_buffer and bits_left are assumed to be locals, - * but the state struct might not be (jpeg_huff_decode needs this). - * CHECK_BIT_BUFFER(state,n,action); - * Ensure there are N bits in get_buffer; if suspend, take action. - * val = GET_BITS(n); - * Fetch next N bits. - * val = PEEK_BITS(n); - * Fetch next N bits without removing them from the buffer. - * DROP_BITS(n); - * Discard next N bits. - * The value N should be a simple variable, not an expression, because it - * is evaluated multiple times. - */ - -#define CHECK_BIT_BUFFER(state,nbits,action) \ - { if (bits_left < (nbits)) { \ - if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ - { action; } \ - get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } - -#define GET_BITS(nbits) \ - (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1)) - -#define PEEK_BITS(nbits) \ - (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1)) - -#define DROP_BITS(nbits) \ - (bits_left -= (nbits)) - -/* Load up the bit buffer to a depth of at least nbits */ -EXTERN boolean jpeg_fill_bit_buffer JPP((bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits)); - - -/* - * Code for extracting next Huffman-coded symbol from input bit stream. - * Again, this is time-critical and we make the main paths be macros. - * - * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits - * without looping. Usually, more than 95% of the Huffman codes will be 8 - * or fewer bits long. The few overlength codes are handled with a loop, - * which need not be inline code. - * - * Notes about the HUFF_DECODE macro: - * 1. Near the end of the data segment, we may fail to get enough bits - * for a lookahead. In that case, we do it the hard way. - * 2. If the lookahead table contains no entry, the next code must be - * more than HUFF_LOOKAHEAD bits long. - * 3. jpeg_huff_decode returns -1 if forced to suspend. - */ - -#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ -{ register int nb, look; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - nb = 1; goto slowlabel; \ - } \ - } \ - look = PEEK_BITS(HUFF_LOOKAHEAD); \ - if ((nb = htbl->look_nbits[look]) != 0) { \ - DROP_BITS(nb); \ - result = htbl->look_sym[look]; \ - } else { \ - nb = HUFF_LOOKAHEAD+1; \ -slowlabel: \ - if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ - { failaction; } \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - } \ -} - -/* Out-of-line case for Huffman code fetching */ -EXTERN int jpeg_huff_decode JPP((bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits)); +/* + * jdhuff.h + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for Huffman entropy decoding routines + * that are shared between the sequential decoder (jdhuff.c) and the + * progressive decoder (jdphuff.c). No other modules need to see these. + */ + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_make_d_derived_tbl jMkDDerived +#define jpeg_fill_bit_buffer jFilBitBuf +#define jpeg_huff_decode jHufDecode +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Derived data constructed for each Huffman table */ + +#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ + +typedef struct { + /* Basic tables: (element [0] of each array is unused) */ + INT32 mincode[17]; /* smallest code of length k */ + INT32 maxcode[18]; /* largest code of length k (-1 if none) */ + /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ + int valptr[17]; /* huffval[] index of 1st symbol of length k */ + + /* Link to public Huffman table (needed only in jpeg_huff_decode) */ + JHUFF_TBL *pub; + + /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of + * the input data stream. If the next Huffman code is no more + * than HUFF_LOOKAHEAD bits long, we can obtain its length and + * the corresponding symbol directly from these tables. + */ + int look_nbits[1< 32 bits on your machine, and shifting/masking longs is + * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE + * appropriately should be a win. Unfortunately we can't do this with + * something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) + * because not all machines measure sizeof in 8-bit bytes. + */ + +typedef struct { /* Bitreading state saved across MCUs */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + boolean printed_eod; /* flag to suppress multiple warning msgs */ +} bitread_perm_state; + +typedef struct { /* Bitreading working state within an MCU */ + /* current data source state */ + const JOCTET * next_input_byte; /* => next byte to read from source */ + size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ + int unread_marker; /* nonzero if we have hit a marker */ + /* bit input buffer --- note these values are kept in register variables, + * not in this struct, inside the inner loops. + */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + /* pointers needed by jpeg_fill_bit_buffer */ + j_decompress_ptr cinfo; /* back link to decompress master record */ + boolean * printed_eod_ptr; /* => flag in permanent state */ +} bitread_working_state; + +/* Macros to declare and load/save bitread local variables. */ +#define BITREAD_STATE_VARS \ + register bit_buf_type get_buffer; \ + register int bits_left; \ + bitread_working_state br_state + +#define BITREAD_LOAD_STATE(cinfop,permstate) \ + br_state.cinfo = cinfop; \ + br_state.next_input_byte = cinfop->src->next_input_byte; \ + br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ + br_state.unread_marker = cinfop->unread_marker; \ + get_buffer = permstate.get_buffer; \ + bits_left = permstate.bits_left; \ + br_state.printed_eod_ptr = & permstate.printed_eod + +#define BITREAD_SAVE_STATE(cinfop,permstate) \ + cinfop->src->next_input_byte = br_state.next_input_byte; \ + cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ + cinfop->unread_marker = br_state.unread_marker; \ + permstate.get_buffer = get_buffer; \ + permstate.bits_left = bits_left + +/* + * These macros provide the in-line portion of bit fetching. + * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer + * before using GET_BITS, PEEK_BITS, or DROP_BITS. + * The variables get_buffer and bits_left are assumed to be locals, + * but the state struct might not be (jpeg_huff_decode needs this). + * CHECK_BIT_BUFFER(state,n,action); + * Ensure there are N bits in get_buffer; if suspend, take action. + * val = GET_BITS(n); + * Fetch next N bits. + * val = PEEK_BITS(n); + * Fetch next N bits without removing them from the buffer. + * DROP_BITS(n); + * Discard next N bits. + * The value N should be a simple variable, not an expression, because it + * is evaluated multiple times. + */ + +#define CHECK_BIT_BUFFER(state,nbits,action) \ + { if (bits_left < (nbits)) { \ + if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ + { action; } \ + get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } + +#define GET_BITS(nbits) \ + (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1)) + +#define PEEK_BITS(nbits) \ + (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1)) + +#define DROP_BITS(nbits) \ + (bits_left -= (nbits)) + +/* Load up the bit buffer to a depth of at least nbits */ +EXTERN boolean jpeg_fill_bit_buffer JPP((bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits)); + + +/* + * Code for extracting next Huffman-coded symbol from input bit stream. + * Again, this is time-critical and we make the main paths be macros. + * + * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits + * without looping. Usually, more than 95% of the Huffman codes will be 8 + * or fewer bits long. The few overlength codes are handled with a loop, + * which need not be inline code. + * + * Notes about the HUFF_DECODE macro: + * 1. Near the end of the data segment, we may fail to get enough bits + * for a lookahead. In that case, we do it the hard way. + * 2. If the lookahead table contains no entry, the next code must be + * more than HUFF_LOOKAHEAD bits long. + * 3. jpeg_huff_decode returns -1 if forced to suspend. + */ + +#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ +{ register int nb, look; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + nb = 1; goto slowlabel; \ + } \ + } \ + look = PEEK_BITS(HUFF_LOOKAHEAD); \ + if ((nb = htbl->look_nbits[look]) != 0) { \ + DROP_BITS(nb); \ + result = htbl->look_sym[look]; \ + } else { \ + nb = HUFF_LOOKAHEAD+1; \ +slowlabel: \ + if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ + { failaction; } \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + } \ +} + +/* Out-of-line case for Huffman code fetching */ +EXTERN int jpeg_huff_decode JPP((bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits)); diff --git a/libs/jpeg6/jdinput.cpp b/libs/jpeg6/jdinput.cpp index 5b4774f..3061a17 100755 --- a/libs/jpeg6/jdinput.cpp +++ b/libs/jpeg6/jdinput.cpp @@ -1,381 +1,381 @@ -/* - * jdinput.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input control logic for the JPEG decompressor. - * These routines are concerned with controlling the decompressor's input - * processing (marker reading and coefficient decoding). The actual input - * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_input_controller pub; /* public fields */ - - boolean inheaders; /* TRUE until first SOS is reached */ -} my_input_controller; - -typedef my_input_controller * my_inputctl_ptr; - - -/* Forward declarations */ -METHODDEF int consume_markers JPP((j_decompress_ptr cinfo)); - - -/* - * Routines to calculate various quantities related to the size of the image. - */ - -LOCAL void -initial_setup (j_decompress_ptr cinfo) -/* Called once, when first SOS marker is reached */ -{ - int ci; - jpeg_component_info *compptr; - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE. - * In the full decompressor, this will be overridden by jdmaster.c; - * but in the transcoder, jdmaster.c is not used, so we must do it here. - */ - cinfo->min_DCT_scaled_size = DCTSIZE; - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* downsampled_width and downsampled_height will also be overridden by - * jdmaster.c if we are doing full decompression. The transcoder library - * doesn't use these values, but the calling application might. - */ - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed, until color conversion says otherwise */ - compptr->component_needed = TRUE; - /* Mark no quantization table yet saved for component */ - compptr->quant_table = NULL; - } - - /* Compute number of fully interleaved MCU rows. */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - /* Decide whether file contains multiple scans */ - if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) - cinfo->inputctl->has_multiple_scans = TRUE; - else - cinfo->inputctl->has_multiple_scans = FALSE; -} - - -LOCAL void -per_scan_setup (j_decompress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = compptr->DCT_scaled_size; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } -} - - -/* - * Save away a copy of the Q-table referenced by each component present - * in the current scan, unless already saved during a prior scan. - * - * In a multiple-scan JPEG file, the encoder could assign different components - * the same Q-table slot number, but change table definitions between scans - * so that each component uses a different Q-table. (The IJG encoder is not - * currently capable of doing this, but other encoders might.) Since we want - * to be able to dequantize all the components at the end of the file, this - * means that we have to save away the table actually used for each component. - * We do this by copying the table at the start of the first scan containing - * the component. - * The JPEG spec prohibits the encoder from changing the contents of a Q-table - * slot between scans of a component using that slot. If the encoder does so - * anyway, this decoder will simply use the Q-table values that were current - * at the start of the first scan for the component. - * - * The decompressor output side looks only at the saved quant tables, - * not at the current Q-table slots. - */ - -LOCAL void -latch_quant_tables (j_decompress_ptr cinfo) -{ - int ci, qtblno; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* No work if we already saved Q-table for this component */ - if (compptr->quant_table != NULL) - continue; - /* Make sure specified quantization table is present */ - qtblno = compptr->quant_tbl_no; - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - /* OK, save away the quantization table */ - qtbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(JQUANT_TBL)); - MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); - compptr->quant_table = qtbl; - } -} - - -/* - * Initialize the input modules to read a scan of compressed data. - * The first call to this is done by jdmaster.c after initializing - * the entire decompressor (during jpeg_start_decompress). - * Subsequent calls come from consume_markers, below. - */ - -METHODDEF void -start_input_pass (j_decompress_ptr cinfo) -{ - per_scan_setup(cinfo); - latch_quant_tables(cinfo); - (*cinfo->entropy->start_pass) (cinfo); - (*cinfo->coef->start_input_pass) (cinfo); - cinfo->inputctl->consume_input = cinfo->coef->consume_data; -} - - -/* - * Finish up after inputting a compressed-data scan. - * This is called by the coefficient controller after it's read all - * the expected data of the scan. - */ - -METHODDEF void -finish_input_pass (j_decompress_ptr cinfo) -{ - cinfo->inputctl->consume_input = consume_markers; -} - - -/* - * Read JPEG markers before, between, or after compressed-data scans. - * Change state as necessary when a new scan is reached. - * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - * - * The consume_input method pointer points either here or to the - * coefficient controller's consume_data routine, depending on whether - * we are reading a compressed data segment or inter-segment markers. - */ - -METHODDEF int -consume_markers (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - int val; - - if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ - return JPEG_REACHED_EOI; - - val = (*cinfo->marker->read_markers) (cinfo); - - switch (val) { - case JPEG_REACHED_SOS: /* Found SOS */ - if (inputctl->inheaders) { /* 1st SOS */ - initial_setup(cinfo); - inputctl->inheaders = FALSE; - /* Note: start_input_pass must be called by jdmaster.c - * before any more input can be consumed. jdapi.c is - * responsible for enforcing this sequencing. - */ - } else { /* 2nd or later SOS marker */ - if (! inputctl->pub.has_multiple_scans) - ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ - start_input_pass(cinfo); - } - break; - case JPEG_REACHED_EOI: /* Found EOI */ - inputctl->pub.eoi_reached = TRUE; - if (inputctl->inheaders) { /* Tables-only datastream, apparently */ - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_NO_SOS); - } else { - /* Prevent infinite loop in coef ctlr's decompress_data routine - * if user set output_scan_number larger than number of scans. - */ - if (cinfo->output_scan_number > cinfo->input_scan_number) - cinfo->output_scan_number = cinfo->input_scan_number; - } - break; - case JPEG_SUSPENDED: - break; - } - - return val; -} - - -/* - * Reset state to begin a fresh datastream. - */ - -METHODDEF void -reset_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - - inputctl->pub.consume_input = consume_markers; - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; - /* Reset other modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->marker->reset_marker_reader) (cinfo); - /* Reset progression state -- would be cleaner if entropy decoder did this */ - cinfo->coef_bits = NULL; -} - - -/* - * Initialize the input controller module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL void -jinit_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl; - - /* Create subobject in permanent pool */ - inputctl = (my_inputctl_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_input_controller)); - cinfo->inputctl = (struct jpeg_input_controller *) inputctl; - /* Initialize method pointers */ - inputctl->pub.consume_input = consume_markers; - inputctl->pub.reset_input_controller = reset_input_controller; - inputctl->pub.start_input_pass = start_input_pass; - inputctl->pub.finish_input_pass = finish_input_pass; - /* Initialize state: can't use reset_input_controller since we don't - * want to try to reset other modules yet. - */ - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; -} +/* + * jdinput.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input control logic for the JPEG decompressor. + * These routines are concerned with controlling the decompressor's input + * processing (marker reading and coefficient decoding). The actual input + * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_input_controller pub; /* public fields */ + + boolean inheaders; /* TRUE until first SOS is reached */ +} my_input_controller; + +typedef my_input_controller * my_inputctl_ptr; + + +/* Forward declarations */ +METHODDEF int consume_markers JPP((j_decompress_ptr cinfo)); + + +/* + * Routines to calculate various quantities related to the size of the image. + */ + +LOCAL void +initial_setup (j_decompress_ptr cinfo) +/* Called once, when first SOS marker is reached */ +{ + int ci; + jpeg_component_info *compptr; + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE. + * In the full decompressor, this will be overridden by jdmaster.c; + * but in the transcoder, jdmaster.c is not used, so we must do it here. + */ + cinfo->min_DCT_scaled_size = DCTSIZE; + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_scaled_size = DCTSIZE; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + /* downsampled_width and downsampled_height will also be overridden by + * jdmaster.c if we are doing full decompression. The transcoder library + * doesn't use these values, but the calling application might. + */ + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed, until color conversion says otherwise */ + compptr->component_needed = TRUE; + /* Mark no quantization table yet saved for component */ + compptr->quant_table = NULL; + } + + /* Compute number of fully interleaved MCU rows. */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); + + /* Decide whether file contains multiple scans */ + if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) + cinfo->inputctl->has_multiple_scans = TRUE; + else + cinfo->inputctl->has_multiple_scans = FALSE; +} + + +LOCAL void +per_scan_setup (j_decompress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor*DCTSIZE)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } +} + + +/* + * Save away a copy of the Q-table referenced by each component present + * in the current scan, unless already saved during a prior scan. + * + * In a multiple-scan JPEG file, the encoder could assign different components + * the same Q-table slot number, but change table definitions between scans + * so that each component uses a different Q-table. (The IJG encoder is not + * currently capable of doing this, but other encoders might.) Since we want + * to be able to dequantize all the components at the end of the file, this + * means that we have to save away the table actually used for each component. + * We do this by copying the table at the start of the first scan containing + * the component. + * The JPEG spec prohibits the encoder from changing the contents of a Q-table + * slot between scans of a component using that slot. If the encoder does so + * anyway, this decoder will simply use the Q-table values that were current + * at the start of the first scan for the component. + * + * The decompressor output side looks only at the saved quant tables, + * not at the current Q-table slots. + */ + +LOCAL void +latch_quant_tables (j_decompress_ptr cinfo) +{ + int ci, qtblno; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* No work if we already saved Q-table for this component */ + if (compptr->quant_table != NULL) + continue; + /* Make sure specified quantization table is present */ + qtblno = compptr->quant_tbl_no; + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + /* OK, save away the quantization table */ + qtbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(JQUANT_TBL)); + MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); + compptr->quant_table = qtbl; + } +} + + +/* + * Initialize the input modules to read a scan of compressed data. + * The first call to this is done by jdmaster.c after initializing + * the entire decompressor (during jpeg_start_decompress). + * Subsequent calls come from consume_markers, below. + */ + +METHODDEF void +start_input_pass (j_decompress_ptr cinfo) +{ + per_scan_setup(cinfo); + latch_quant_tables(cinfo); + (*cinfo->entropy->start_pass) (cinfo); + (*cinfo->coef->start_input_pass) (cinfo); + cinfo->inputctl->consume_input = cinfo->coef->consume_data; +} + + +/* + * Finish up after inputting a compressed-data scan. + * This is called by the coefficient controller after it's read all + * the expected data of the scan. + */ + +METHODDEF void +finish_input_pass (j_decompress_ptr cinfo) +{ + cinfo->inputctl->consume_input = consume_markers; +} + + +/* + * Read JPEG markers before, between, or after compressed-data scans. + * Change state as necessary when a new scan is reached. + * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * The consume_input method pointer points either here or to the + * coefficient controller's consume_data routine, depending on whether + * we are reading a compressed data segment or inter-segment markers. + */ + +METHODDEF int +consume_markers (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + int val; + + if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ + return JPEG_REACHED_EOI; + + val = (*cinfo->marker->read_markers) (cinfo); + + switch (val) { + case JPEG_REACHED_SOS: /* Found SOS */ + if (inputctl->inheaders) { /* 1st SOS */ + initial_setup(cinfo); + inputctl->inheaders = FALSE; + /* Note: start_input_pass must be called by jdmaster.c + * before any more input can be consumed. jdapi.c is + * responsible for enforcing this sequencing. + */ + } else { /* 2nd or later SOS marker */ + if (! inputctl->pub.has_multiple_scans) + ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ + start_input_pass(cinfo); + } + break; + case JPEG_REACHED_EOI: /* Found EOI */ + inputctl->pub.eoi_reached = TRUE; + if (inputctl->inheaders) { /* Tables-only datastream, apparently */ + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_NO_SOS); + } else { + /* Prevent infinite loop in coef ctlr's decompress_data routine + * if user set output_scan_number larger than number of scans. + */ + if (cinfo->output_scan_number > cinfo->input_scan_number) + cinfo->output_scan_number = cinfo->input_scan_number; + } + break; + case JPEG_SUSPENDED: + break; + } + + return val; +} + + +/* + * Reset state to begin a fresh datastream. + */ + +METHODDEF void +reset_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + + inputctl->pub.consume_input = consume_markers; + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = TRUE; + /* Reset other modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->marker->reset_marker_reader) (cinfo); + /* Reset progression state -- would be cleaner if entropy decoder did this */ + cinfo->coef_bits = NULL; +} + + +/* + * Initialize the input controller module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL void +jinit_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl; + + /* Create subobject in permanent pool */ + inputctl = (my_inputctl_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_input_controller)); + cinfo->inputctl = (struct jpeg_input_controller *) inputctl; + /* Initialize method pointers */ + inputctl->pub.consume_input = consume_markers; + inputctl->pub.reset_input_controller = reset_input_controller; + inputctl->pub.start_input_pass = start_input_pass; + inputctl->pub.finish_input_pass = finish_input_pass; + /* Initialize state: can't use reset_input_controller since we don't + * want to try to reset other modules yet. + */ + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = TRUE; +} diff --git a/libs/jpeg6/jdmainct.cpp b/libs/jpeg6/jdmainct.cpp index c4e0d54..f3a06e5 100755 --- a/libs/jpeg6/jdmainct.cpp +++ b/libs/jpeg6/jdmainct.cpp @@ -1,512 +1,512 @@ -/* - * jdmainct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for decompression. - * The main buffer lies between the JPEG decompressor proper and the - * post-processor; it holds downsampled data in the JPEG colorspace. - * - * Note that this code is bypassed in raw-data mode, since the application - * supplies the equivalent of the main buffer in that case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * In the current system design, the main buffer need never be a full-image - * buffer; any full-height buffers will be found inside the coefficient or - * postprocessing controllers. Nonetheless, the main controller is not - * trivial. Its responsibility is to provide context rows for upsampling/ - * rescaling, and doing this in an efficient fashion is a bit tricky. - * - * Postprocessor input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. (We require DCT_scaled_size values to be - * chosen such that these numbers are integers. In practice DCT_scaled_size - * values will likely be powers of two, so we actually have the stronger - * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) - * Upsampling will typically produce max_v_samp_factor pixel rows from each - * row group (times any additional scale factor that the upsampler is - * applying). - * - * The coefficient controller will deliver data to us one iMCU row at a time; - * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or - * exactly min_DCT_scaled_size row groups. (This amount of data corresponds - * to one row of MCUs when the image is fully interleaved.) Note that the - * number of sample rows varies across components, but the number of row - * groups does not. Some garbage sample rows may be included in the last iMCU - * row at the bottom of the image. - * - * Depending on the vertical scaling algorithm used, the upsampler may need - * access to the sample row(s) above and below its current input row group. - * The upsampler is required to set need_context_rows TRUE at global selection - * time if so. When need_context_rows is FALSE, this controller can simply - * obtain one iMCU row at a time from the coefficient controller and dole it - * out as row groups to the postprocessor. - * - * When need_context_rows is TRUE, this controller guarantees that the buffer - * passed to postprocessing contains at least one row group's worth of samples - * above and below the row group(s) being processed. Note that the context - * rows "above" the first passed row group appear at negative row offsets in - * the passed buffer. At the top and bottom of the image, the required - * context rows are manufactured by duplicating the first or last real sample - * row; this avoids having special cases in the upsampling inner loops. - * - * The amount of context is fixed at one row group just because that's a - * convenient number for this controller to work with. The existing - * upsamplers really only need one sample row of context. An upsampler - * supporting arbitrary output rescaling might wish for more than one row - * group of context when shrinking the image; tough, we don't handle that. - * (This is justified by the assumption that downsizing will be handled mostly - * by adjusting the DCT_scaled_size values, so that the actual scale factor at - * the upsample step needn't be much less than one.) - * - * To provide the desired context, we have to retain the last two row groups - * of one iMCU row while reading in the next iMCU row. (The last row group - * can't be processed until we have another row group for its below-context, - * and so we have to save the next-to-last group too for its above-context.) - * We could do this most simply by copying data around in our buffer, but - * that'd be very slow. We can avoid copying any data by creating a rather - * strange pointer structure. Here's how it works. We allocate a workspace - * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number - * of row groups per iMCU row). We create two sets of redundant pointers to - * the workspace. Labeling the physical row groups 0 to M+1, the synthesized - * pointer lists look like this: - * M+1 M-1 - * master pointer --> 0 master pointer --> 0 - * 1 1 - * ... ... - * M-3 M-3 - * M-2 M - * M-1 M+1 - * M M-2 - * M+1 M-1 - * 0 0 - * We read alternate iMCU rows using each master pointer; thus the last two - * row groups of the previous iMCU row remain un-overwritten in the workspace. - * The pointer lists are set up so that the required context rows appear to - * be adjacent to the proper places when we pass the pointer lists to the - * upsampler. - * - * The above pictures describe the normal state of the pointer lists. - * At top and bottom of the image, we diddle the pointer lists to duplicate - * the first or last sample row as necessary (this is cheaper than copying - * sample rows around). - * - * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that - * situation each iMCU row provides only one row group so the buffering logic - * must be different (eg, we must read two iMCU rows before we can emit the - * first row group). For now, we simply do not support providing context - * rows when min_DCT_scaled_size is 1. That combination seems unlikely to - * be worth providing --- if someone wants a 1/8th-size preview, they probably - * want it quick and dirty, so a context-free upsampler is sufficient. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_main_controller pub; /* public fields */ - - /* Pointer to allocated workspace (M or M+2 row groups). */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - - boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ - JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ - - /* Remaining fields are only used in the context case. */ - - /* These are the master pointers to the funny-order pointer lists. */ - JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ - - int whichptr; /* indicates which pointer set is now in use */ - int context_state; /* process_data state machine status */ - JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ - JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - -/* context_state values: */ -#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ -#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ -#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ - - -/* Forward declarations */ -METHODDEF void process_data_simple_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -METHODDEF void process_data_context_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF void process_data_crank_post - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#endif - - -LOCAL void -alloc_funny_pointers (j_decompress_ptr cinfo) -/* Allocate space for the funny pointer lists. - * This is done only once, not once per pass. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - /* Get top-level space for component array pointers. - * We alloc both arrays with one call to save a few cycles. - */ - main->xbuffer[0] = (JSAMPIMAGE) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); - main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - /* Get space for pointer lists --- M+4 row groups in each list. - * We alloc both pointer lists with one call to save a few cycles. - */ - xbuf = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); - xbuf += rgroup; /* want one row group at negative offsets */ - main->xbuffer[0][ci] = xbuf; - xbuf += rgroup * (M + 4); - main->xbuffer[1][ci] = xbuf; - } -} - - -LOCAL void -make_funny_pointers (j_decompress_ptr cinfo) -/* Create the funny pointer lists discussed in the comments above. - * The actual workspace is already allocated (in main->buffer), - * and the space for the pointer lists is allocated too. - * This routine just fills in the curiously ordered lists. - * This will be repeated at the beginning of each pass. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY buf, xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = main->xbuffer[0][ci]; - xbuf1 = main->xbuffer[1][ci]; - /* First copy the workspace pointers as-is */ - buf = main->buffer[ci]; - for (i = 0; i < rgroup * (M + 2); i++) { - xbuf0[i] = xbuf1[i] = buf[i]; - } - /* In the second list, put the last four row groups in swapped order */ - for (i = 0; i < rgroup * 2; i++) { - xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; - xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; - } - /* The wraparound pointers at top and bottom will be filled later - * (see set_wraparound_pointers, below). Initially we want the "above" - * pointers to duplicate the first actual data line. This only needs - * to happen in xbuffer[0]. - */ - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[0]; - } - } -} - - -LOCAL void -set_wraparound_pointers (j_decompress_ptr cinfo) -/* Set up the "wraparound" pointers at top and bottom of the pointer lists. - * This changes the pointer list state from top-of-image to the normal state. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = main->xbuffer[0][ci]; - xbuf1 = main->xbuffer[1][ci]; - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; - xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; - xbuf0[rgroup*(M+2) + i] = xbuf0[i]; - xbuf1[rgroup*(M+2) + i] = xbuf1[i]; - } - } -} - - -LOCAL void -set_bottom_pointers (j_decompress_ptr cinfo) -/* Change the pointer lists to duplicate the last sample row at the bottom - * of the image. whichptr indicates which xbuffer holds the final iMCU row. - * Also sets rowgroups_avail to indicate number of nondummy row groups in row. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, i, rgroup, iMCUheight, rows_left; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Count sample rows in one iMCU row and in one row group */ - iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size; - rgroup = iMCUheight / cinfo->min_DCT_scaled_size; - /* Count nondummy sample rows remaining for this component */ - rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); - if (rows_left == 0) rows_left = iMCUheight; - /* Count nondummy row groups. Should get same answer for each component, - * so we need only do it once. - */ - if (ci == 0) { - main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); - } - /* Duplicate the last real sample row rgroup*2 times; this pads out the - * last partial rowgroup and ensures at least one full rowgroup of context. - */ - xbuf = main->xbuffer[main->whichptr][ci]; - for (i = 0; i < rgroup * 2; i++) { - xbuf[rows_left + i] = xbuf[rows_left-1]; - } - } -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->upsample->need_context_rows) { - main->pub.process_data = process_data_context_main; - make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ - main->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ - main->context_state = CTX_PREPARE_FOR_IMCU; - main->iMCU_row_ctr = 0; - } else { - /* Simple case with no context needed */ - main->pub.process_data = process_data_simple_main; - } - main->buffer_full = FALSE; /* Mark buffer empty */ - main->rowgroup_ctr = 0; - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_CRANK_DEST: - /* For last pass of 2-pass quantization, just crank the postprocessor */ - main->pub.process_data = process_data_crank_post; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This handles the simple case where no context is required. - */ - -METHODDEF void -process_data_simple_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - JDIMENSION rowgroups_avail; - - /* Read input data if we haven't filled the main buffer yet */ - if (! main->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer)) - return; /* suspension forced, can do nothing more */ - main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - } - - /* There are always min_DCT_scaled_size row groups in an iMCU row. */ - rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size; - /* Note: at the bottom of the image, we may pass extra garbage row groups - * to the postprocessor. The postprocessor has to check for bottom - * of image anyway (at row resolution), so no point in us doing it too. - */ - - /* Feed the postprocessor */ - (*cinfo->post->post_process_data) (cinfo, main->buffer, - &main->rowgroup_ctr, rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - - /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ - if (main->rowgroup_ctr >= rowgroups_avail) { - main->buffer_full = FALSE; - main->rowgroup_ctr = 0; - } -} - - -/* - * Process some data. - * This handles the case where context rows must be provided. - */ - -METHODDEF void -process_data_context_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - - /* Read input data if we haven't filled the main buffer yet */ - if (! main->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, - main->xbuffer[main->whichptr])) - return; /* suspension forced, can do nothing more */ - main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - main->iMCU_row_ctr++; /* count rows received */ - } - - /* Postprocessor typically will not swallow all the input data it is handed - * in one call (due to filling the output buffer first). Must be prepared - * to exit and restart. This switch lets us keep track of how far we got. - * Note that each case falls through to the next on successful completion. - */ - switch (main->context_state) { - case CTX_POSTPONED_ROW: - /* Call postprocessor using previously set pointers for postponed row */ - (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], - &main->rowgroup_ctr, main->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (main->rowgroup_ctr < main->rowgroups_avail) - return; /* Need to suspend */ - main->context_state = CTX_PREPARE_FOR_IMCU; - if (*out_row_ctr >= out_rows_avail) - return; /* Postprocessor exactly filled output buf */ - /*FALLTHROUGH*/ - case CTX_PREPARE_FOR_IMCU: - /* Prepare to process first M-1 row groups of this iMCU row */ - main->rowgroup_ctr = 0; - main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1); - /* Check for bottom of image: if so, tweak pointers to "duplicate" - * the last sample row, and adjust rowgroups_avail to ignore padding rows. - */ - if (main->iMCU_row_ctr == cinfo->total_iMCU_rows) - set_bottom_pointers(cinfo); - main->context_state = CTX_PROCESS_IMCU; - /*FALLTHROUGH*/ - case CTX_PROCESS_IMCU: - /* Call postprocessor using previously set pointers */ - (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], - &main->rowgroup_ctr, main->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (main->rowgroup_ctr < main->rowgroups_avail) - return; /* Need to suspend */ - /* After the first iMCU, change wraparound pointers to normal state */ - if (main->iMCU_row_ctr == 1) - set_wraparound_pointers(cinfo); - /* Prepare to load new iMCU row using other xbuffer list */ - main->whichptr ^= 1; /* 0=>1 or 1=>0 */ - main->buffer_full = FALSE; - /* Still need to process last row group of this iMCU row, */ - /* which is saved at index M+1 of the other xbuffer */ - main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1); - main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2); - main->context_state = CTX_POSTPONED_ROW; - } -} - - -/* - * Process some data. - * Final pass of two-pass quantization: just call the postprocessor. - * Source data will be the postprocessor controller's internal buffer. - */ - -#ifdef QUANT_2PASS_SUPPORTED - -METHODDEF void -process_data_crank_post (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, - (JDIMENSION *) NULL, (JDIMENSION) 0, - output_buf, out_row_ctr, out_rows_avail); -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL void -jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_main_ptr main; - int ci, rgroup, ngroups; - jpeg_component_info *compptr; - - main = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_d_main_controller *) main; - main->pub.start_pass = start_pass_main; - - if (need_full_buffer) /* shouldn't happen */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Allocate the workspace. - * ngroups is the number of row groups we need. - */ - if (cinfo->upsample->need_context_rows) { - if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */ - ERREXIT(cinfo, JERR_NOTIMPL); - alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ - ngroups = cinfo->min_DCT_scaled_size + 2; - } else { - ngroups = cinfo->min_DCT_scaled_size; - } - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - main->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * compptr->DCT_scaled_size, - (JDIMENSION) (rgroup * ngroups)); - } -} +/* + * jdmainct.c + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for decompression. + * The main buffer lies between the JPEG decompressor proper and the + * post-processor; it holds downsampled data in the JPEG colorspace. + * + * Note that this code is bypassed in raw-data mode, since the application + * supplies the equivalent of the main buffer in that case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * In the current system design, the main buffer need never be a full-image + * buffer; any full-height buffers will be found inside the coefficient or + * postprocessing controllers. Nonetheless, the main controller is not + * trivial. Its responsibility is to provide context rows for upsampling/ + * rescaling, and doing this in an efficient fashion is a bit tricky. + * + * Postprocessor input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. (We require DCT_scaled_size values to be + * chosen such that these numbers are integers. In practice DCT_scaled_size + * values will likely be powers of two, so we actually have the stronger + * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) + * Upsampling will typically produce max_v_samp_factor pixel rows from each + * row group (times any additional scale factor that the upsampler is + * applying). + * + * The coefficient controller will deliver data to us one iMCU row at a time; + * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or + * exactly min_DCT_scaled_size row groups. (This amount of data corresponds + * to one row of MCUs when the image is fully interleaved.) Note that the + * number of sample rows varies across components, but the number of row + * groups does not. Some garbage sample rows may be included in the last iMCU + * row at the bottom of the image. + * + * Depending on the vertical scaling algorithm used, the upsampler may need + * access to the sample row(s) above and below its current input row group. + * The upsampler is required to set need_context_rows TRUE at global selection + * time if so. When need_context_rows is FALSE, this controller can simply + * obtain one iMCU row at a time from the coefficient controller and dole it + * out as row groups to the postprocessor. + * + * When need_context_rows is TRUE, this controller guarantees that the buffer + * passed to postprocessing contains at least one row group's worth of samples + * above and below the row group(s) being processed. Note that the context + * rows "above" the first passed row group appear at negative row offsets in + * the passed buffer. At the top and bottom of the image, the required + * context rows are manufactured by duplicating the first or last real sample + * row; this avoids having special cases in the upsampling inner loops. + * + * The amount of context is fixed at one row group just because that's a + * convenient number for this controller to work with. The existing + * upsamplers really only need one sample row of context. An upsampler + * supporting arbitrary output rescaling might wish for more than one row + * group of context when shrinking the image; tough, we don't handle that. + * (This is justified by the assumption that downsizing will be handled mostly + * by adjusting the DCT_scaled_size values, so that the actual scale factor at + * the upsample step needn't be much less than one.) + * + * To provide the desired context, we have to retain the last two row groups + * of one iMCU row while reading in the next iMCU row. (The last row group + * can't be processed until we have another row group for its below-context, + * and so we have to save the next-to-last group too for its above-context.) + * We could do this most simply by copying data around in our buffer, but + * that'd be very slow. We can avoid copying any data by creating a rather + * strange pointer structure. Here's how it works. We allocate a workspace + * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number + * of row groups per iMCU row). We create two sets of redundant pointers to + * the workspace. Labeling the physical row groups 0 to M+1, the synthesized + * pointer lists look like this: + * M+1 M-1 + * master pointer --> 0 master pointer --> 0 + * 1 1 + * ... ... + * M-3 M-3 + * M-2 M + * M-1 M+1 + * M M-2 + * M+1 M-1 + * 0 0 + * We read alternate iMCU rows using each master pointer; thus the last two + * row groups of the previous iMCU row remain un-overwritten in the workspace. + * The pointer lists are set up so that the required context rows appear to + * be adjacent to the proper places when we pass the pointer lists to the + * upsampler. + * + * The above pictures describe the normal state of the pointer lists. + * At top and bottom of the image, we diddle the pointer lists to duplicate + * the first or last sample row as necessary (this is cheaper than copying + * sample rows around). + * + * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that + * situation each iMCU row provides only one row group so the buffering logic + * must be different (eg, we must read two iMCU rows before we can emit the + * first row group). For now, we simply do not support providing context + * rows when min_DCT_scaled_size is 1. That combination seems unlikely to + * be worth providing --- if someone wants a 1/8th-size preview, they probably + * want it quick and dirty, so a context-free upsampler is sufficient. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_main_controller pub; /* public fields */ + + /* Pointer to allocated workspace (M or M+2 row groups). */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + + boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ + JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ + + /* Remaining fields are only used in the context case. */ + + /* These are the master pointers to the funny-order pointer lists. */ + JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ + + int whichptr; /* indicates which pointer set is now in use */ + int context_state; /* process_data state machine status */ + JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ + JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + +/* context_state values: */ +#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ +#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ +#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ + + +/* Forward declarations */ +METHODDEF void process_data_simple_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +METHODDEF void process_data_context_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF void process_data_crank_post + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#endif + + +LOCAL void +alloc_funny_pointers (j_decompress_ptr cinfo) +/* Allocate space for the funny pointer lists. + * This is done only once, not once per pass. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, rgroup; + int M = cinfo->min_DCT_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + /* Get top-level space for component array pointers. + * We alloc both arrays with one call to save a few cycles. + */ + main->xbuffer[0] = (JSAMPIMAGE) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); + main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + /* Get space for pointer lists --- M+4 row groups in each list. + * We alloc both pointer lists with one call to save a few cycles. + */ + xbuf = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); + xbuf += rgroup; /* want one row group at negative offsets */ + main->xbuffer[0][ci] = xbuf; + xbuf += rgroup * (M + 4); + main->xbuffer[1][ci] = xbuf; + } +} + + +LOCAL void +make_funny_pointers (j_decompress_ptr cinfo) +/* Create the funny pointer lists discussed in the comments above. + * The actual workspace is already allocated (in main->buffer), + * and the space for the pointer lists is allocated too. + * This routine just fills in the curiously ordered lists. + * This will be repeated at the beginning of each pass. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY buf, xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + xbuf0 = main->xbuffer[0][ci]; + xbuf1 = main->xbuffer[1][ci]; + /* First copy the workspace pointers as-is */ + buf = main->buffer[ci]; + for (i = 0; i < rgroup * (M + 2); i++) { + xbuf0[i] = xbuf1[i] = buf[i]; + } + /* In the second list, put the last four row groups in swapped order */ + for (i = 0; i < rgroup * 2; i++) { + xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; + xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; + } + /* The wraparound pointers at top and bottom will be filled later + * (see set_wraparound_pointers, below). Initially we want the "above" + * pointers to duplicate the first actual data line. This only needs + * to happen in xbuffer[0]. + */ + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[0]; + } + } +} + + +LOCAL void +set_wraparound_pointers (j_decompress_ptr cinfo) +/* Set up the "wraparound" pointers at top and bottom of the pointer lists. + * This changes the pointer list state from top-of-image to the normal state. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + xbuf0 = main->xbuffer[0][ci]; + xbuf1 = main->xbuffer[1][ci]; + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; + xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; + xbuf0[rgroup*(M+2) + i] = xbuf0[i]; + xbuf1[rgroup*(M+2) + i] = xbuf1[i]; + } + } +} + + +LOCAL void +set_bottom_pointers (j_decompress_ptr cinfo) +/* Change the pointer lists to duplicate the last sample row at the bottom + * of the image. whichptr indicates which xbuffer holds the final iMCU row. + * Also sets rowgroups_avail to indicate number of nondummy row groups in row. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup, iMCUheight, rows_left; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Count sample rows in one iMCU row and in one row group */ + iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size; + rgroup = iMCUheight / cinfo->min_DCT_scaled_size; + /* Count nondummy sample rows remaining for this component */ + rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); + if (rows_left == 0) rows_left = iMCUheight; + /* Count nondummy row groups. Should get same answer for each component, + * so we need only do it once. + */ + if (ci == 0) { + main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); + } + /* Duplicate the last real sample row rgroup*2 times; this pads out the + * last partial rowgroup and ensures at least one full rowgroup of context. + */ + xbuf = main->xbuffer[main->whichptr][ci]; + for (i = 0; i < rgroup * 2; i++) { + xbuf[rows_left + i] = xbuf[rows_left-1]; + } + } +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF void +start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->upsample->need_context_rows) { + main->pub.process_data = process_data_context_main; + make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ + main->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ + main->context_state = CTX_PREPARE_FOR_IMCU; + main->iMCU_row_ctr = 0; + } else { + /* Simple case with no context needed */ + main->pub.process_data = process_data_simple_main; + } + main->buffer_full = FALSE; /* Mark buffer empty */ + main->rowgroup_ctr = 0; + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_CRANK_DEST: + /* For last pass of 2-pass quantization, just crank the postprocessor */ + main->pub.process_data = process_data_crank_post; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This handles the simple case where no context is required. + */ + +METHODDEF void +process_data_simple_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + JDIMENSION rowgroups_avail; + + /* Read input data if we haven't filled the main buffer yet */ + if (! main->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer)) + return; /* suspension forced, can do nothing more */ + main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + } + + /* There are always min_DCT_scaled_size row groups in an iMCU row. */ + rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size; + /* Note: at the bottom of the image, we may pass extra garbage row groups + * to the postprocessor. The postprocessor has to check for bottom + * of image anyway (at row resolution), so no point in us doing it too. + */ + + /* Feed the postprocessor */ + (*cinfo->post->post_process_data) (cinfo, main->buffer, + &main->rowgroup_ctr, rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + + /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ + if (main->rowgroup_ctr >= rowgroups_avail) { + main->buffer_full = FALSE; + main->rowgroup_ctr = 0; + } +} + + +/* + * Process some data. + * This handles the case where context rows must be provided. + */ + +METHODDEF void +process_data_context_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + /* Read input data if we haven't filled the main buffer yet */ + if (! main->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, + main->xbuffer[main->whichptr])) + return; /* suspension forced, can do nothing more */ + main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + main->iMCU_row_ctr++; /* count rows received */ + } + + /* Postprocessor typically will not swallow all the input data it is handed + * in one call (due to filling the output buffer first). Must be prepared + * to exit and restart. This switch lets us keep track of how far we got. + * Note that each case falls through to the next on successful completion. + */ + switch (main->context_state) { + case CTX_POSTPONED_ROW: + /* Call postprocessor using previously set pointers for postponed row */ + (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], + &main->rowgroup_ctr, main->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (main->rowgroup_ctr < main->rowgroups_avail) + return; /* Need to suspend */ + main->context_state = CTX_PREPARE_FOR_IMCU; + if (*out_row_ctr >= out_rows_avail) + return; /* Postprocessor exactly filled output buf */ + /*FALLTHROUGH*/ + case CTX_PREPARE_FOR_IMCU: + /* Prepare to process first M-1 row groups of this iMCU row */ + main->rowgroup_ctr = 0; + main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1); + /* Check for bottom of image: if so, tweak pointers to "duplicate" + * the last sample row, and adjust rowgroups_avail to ignore padding rows. + */ + if (main->iMCU_row_ctr == cinfo->total_iMCU_rows) + set_bottom_pointers(cinfo); + main->context_state = CTX_PROCESS_IMCU; + /*FALLTHROUGH*/ + case CTX_PROCESS_IMCU: + /* Call postprocessor using previously set pointers */ + (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], + &main->rowgroup_ctr, main->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (main->rowgroup_ctr < main->rowgroups_avail) + return; /* Need to suspend */ + /* After the first iMCU, change wraparound pointers to normal state */ + if (main->iMCU_row_ctr == 1) + set_wraparound_pointers(cinfo); + /* Prepare to load new iMCU row using other xbuffer list */ + main->whichptr ^= 1; /* 0=>1 or 1=>0 */ + main->buffer_full = FALSE; + /* Still need to process last row group of this iMCU row, */ + /* which is saved at index M+1 of the other xbuffer */ + main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1); + main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2); + main->context_state = CTX_POSTPONED_ROW; + } +} + + +/* + * Process some data. + * Final pass of two-pass quantization: just call the postprocessor. + * Source data will be the postprocessor controller's internal buffer. + */ + +#ifdef QUANT_2PASS_SUPPORTED + +METHODDEF void +process_data_crank_post (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, + (JDIMENSION *) NULL, (JDIMENSION) 0, + output_buf, out_row_ctr, out_rows_avail); +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL void +jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr main; + int ci, rgroup, ngroups; + jpeg_component_info *compptr; + + main = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = (struct jpeg_d_main_controller *) main; + main->pub.start_pass = start_pass_main; + + if (need_full_buffer) /* shouldn't happen */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Allocate the workspace. + * ngroups is the number of row groups we need. + */ + if (cinfo->upsample->need_context_rows) { + if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */ + ERREXIT(cinfo, JERR_NOTIMPL); + alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ + ngroups = cinfo->min_DCT_scaled_size + 2; + } else { + ngroups = cinfo->min_DCT_scaled_size; + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + main->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * compptr->DCT_scaled_size, + (JDIMENSION) (rgroup * ngroups)); + } +} diff --git a/libs/jpeg6/jdmarker.cpp b/libs/jpeg6/jdmarker.cpp index 6c3c519..80e5f78 100755 --- a/libs/jpeg6/jdmarker.cpp +++ b/libs/jpeg6/jdmarker.cpp @@ -1,1052 +1,1052 @@ -/* - * jdmarker.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to decode JPEG datastream markers. - * Most of the complexity arises from our desire to support input - * suspension: if not all of the data for a marker is available, - * we must exit back to the application. On resumption, we reprocess - * the marker. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* - * Macros for fetching data from the data source module. - * - * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect - * the current restart point; we update them only when we have reached a - * suitable place to restart if a suspension occurs. - */ - -/* Declare and initialize local copies of input pointer/count */ -#define INPUT_VARS(cinfo) \ - struct jpeg_source_mgr * datasrc = (cinfo)->src; \ - const JOCTET * next_input_byte = datasrc->next_input_byte; \ - size_t bytes_in_buffer = datasrc->bytes_in_buffer - -/* Unload the local copies --- do this only at a restart boundary */ -#define INPUT_SYNC(cinfo) \ - ( datasrc->next_input_byte = next_input_byte, \ - datasrc->bytes_in_buffer = bytes_in_buffer ) - -/* Reload the local copies --- seldom used except in MAKE_BYTE_AVAIL */ -#define INPUT_RELOAD(cinfo) \ - ( next_input_byte = datasrc->next_input_byte, \ - bytes_in_buffer = datasrc->bytes_in_buffer ) - -/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. - * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, - * but we must reload the local copies after a successful fill. - */ -#define MAKE_BYTE_AVAIL(cinfo,action) \ - if (bytes_in_buffer == 0) { \ - if (! (*datasrc->fill_input_buffer) (cinfo)) \ - { action; } \ - INPUT_RELOAD(cinfo); \ - } \ - bytes_in_buffer-- - -/* Read a byte into variable V. - * If must suspend, take the specified action (typically "return FALSE"). - */ -#define INPUT_BYTE(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - V = GETJOCTET(*next_input_byte++); ) - -/* As above, but read two bytes interpreted as an unsigned 16-bit integer. - * V should be declared unsigned int or perhaps INT32. - */ -#define INPUT_2BYTES(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ - MAKE_BYTE_AVAIL(cinfo,action); \ - V += GETJOCTET(*next_input_byte++); ) - - -/* - * Routines to process JPEG markers. - * - * Entry condition: JPEG marker itself has been read and its code saved - * in cinfo->unread_marker; input restart point is just after the marker. - * - * Exit: if return TRUE, have read and processed any parameters, and have - * updated the restart point to point after the parameters. - * If return FALSE, was forced to suspend before reaching end of - * marker parameters; restart point has not been moved. Same routine - * will be called again after application supplies more input data. - * - * This approach to suspension assumes that all of a marker's parameters can - * fit into a single input bufferload. This should hold for "normal" - * markers. Some COM/APPn markers might have large parameter segments, - * but we use skip_input_data to get past those, and thereby put the problem - * on the source manager's shoulders. - * - * Note that we don't bother to avoid duplicate trace messages if a - * suspension occurs within marker parameters. Other side effects - * require more care. - */ - - -LOCAL boolean -get_soi (j_decompress_ptr cinfo) -/* Process an SOI marker */ -{ - int i; - - TRACEMS(cinfo, 1, JTRC_SOI); - - if (cinfo->marker->saw_SOI) - ERREXIT(cinfo, JERR_SOI_DUPLICATE); - - /* Reset all parameters that are defined to be reset by SOI */ - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - cinfo->restart_interval = 0; - - /* Set initial assumptions for colorspace etc */ - - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ - - cinfo->saw_JFIF_marker = FALSE; - cinfo->density_unit = 0; /* set default JFIF APP0 values */ - cinfo->X_density = 1; - cinfo->Y_density = 1; - cinfo->saw_Adobe_marker = FALSE; - cinfo->Adobe_transform = 0; - - cinfo->marker->saw_SOI = TRUE; - - return TRUE; -} - - -LOCAL boolean -get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith) -/* Process a SOFn marker */ -{ - INT32 length; - int c, ci; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - cinfo->progressive_mode = is_prog; - cinfo->arith_code = is_arith; - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); - INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); - - length -= 8; - - TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, - (int) cinfo->image_width, (int) cinfo->image_height, - cinfo->num_components); - - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_DUPLICATE); - - /* We don't support files in which the image height is initially specified */ - /* as 0 and is later redefined by DNL. As long as we have to check that, */ - /* might as well have a general sanity check. */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - if (length != (cinfo->num_components * 3)) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - if (cinfo->comp_info == NULL) /* do only once, even if suspend */ - cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * SIZEOF(jpeg_component_info)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->component_index = ci; - INPUT_BYTE(cinfo, compptr->component_id, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - compptr->h_samp_factor = (c >> 4) & 15; - compptr->v_samp_factor = (c ) & 15; - INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); - - TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, - compptr->component_id, compptr->h_samp_factor, - compptr->v_samp_factor, compptr->quant_tbl_no); - } - - cinfo->marker->saw_SOF = TRUE; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_sos (j_decompress_ptr cinfo) -/* Process a SOS marker */ -{ - INT32 length; - int i, ci, n, c, cc; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - if (! cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOS_NO_SOF); - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ - - if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - TRACEMS1(cinfo, 1, JTRC_SOS, n); - - cinfo->comps_in_scan = n; - - /* Collect the component-spec parameters */ - - for (i = 0; i < n; i++) { - INPUT_BYTE(cinfo, cc, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (cc == compptr->component_id) - goto id_found; - } - - ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); - - id_found: - - cinfo->cur_comp_info[i] = compptr; - compptr->dc_tbl_no = (c >> 4) & 15; - compptr->ac_tbl_no = (c ) & 15; - - TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, - compptr->dc_tbl_no, compptr->ac_tbl_no); - } - - /* Collect the additional scan parameters Ss, Se, Ah/Al. */ - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ss = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Se = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ah = (c >> 4) & 15; - cinfo->Al = (c ) & 15; - - TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, - cinfo->Ah, cinfo->Al); - - /* Prepare to scan data & restart markers */ - cinfo->marker->next_restart_num = 0; - - /* Count another SOS marker */ - cinfo->input_scan_number++; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -METHODDEF boolean -get_app0 (j_decompress_ptr cinfo) -/* Process an APP0 marker */ -{ -#define JFIF_LEN 14 - INT32 length; - UINT8 b[JFIF_LEN]; - int buffp; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - /* See if a JFIF APP0 marker is present */ - - if (length >= JFIF_LEN) { - for (buffp = 0; buffp < JFIF_LEN; buffp++) - INPUT_BYTE(cinfo, b[buffp], return FALSE); - length -= JFIF_LEN; - - if (b[0]==0x4A && b[1]==0x46 && b[2]==0x49 && b[3]==0x46 && b[4]==0) { - /* Found JFIF APP0 marker: check version */ - /* Major version must be 1, anything else signals an incompatible change. - * We used to treat this as an error, but now it's a nonfatal warning, - * because some bozo at Hijaak couldn't read the spec. - * Minor version should be 0..2, but process anyway if newer. - */ - if (b[5] != 1) - WARNMS2(cinfo, JWRN_JFIF_MAJOR, b[5], b[6]); - else if (b[6] > 2) - TRACEMS2(cinfo, 1, JTRC_JFIF_MINOR, b[5], b[6]); - /* Save info */ - cinfo->saw_JFIF_marker = TRUE; - cinfo->density_unit = b[7]; - cinfo->X_density = (b[8] << 8) + b[9]; - cinfo->Y_density = (b[10] << 8) + b[11]; - TRACEMS3(cinfo, 1, JTRC_JFIF, - cinfo->X_density, cinfo->Y_density, cinfo->density_unit); - if (b[12] | b[13]) - TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, b[12], b[13]); - if (length != ((INT32) b[12] * (INT32) b[13] * (INT32) 3)) - TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) length); - } else { - /* Start of APP0 does not match "JFIF" */ - TRACEMS1(cinfo, 1, JTRC_APP0, (int) length + JFIF_LEN); - } - } else { - /* Too short to be JFIF marker */ - TRACEMS1(cinfo, 1, JTRC_APP0, (int) length); - } - - INPUT_SYNC(cinfo); - if (length > 0) /* skip any remaining data -- could be lots */ - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -METHODDEF boolean -get_app14 (j_decompress_ptr cinfo) -/* Process an APP14 marker */ -{ -#define ADOBE_LEN 12 - INT32 length; - UINT8 b[ADOBE_LEN]; - int buffp; - unsigned int version, flags0, flags1, transform; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - /* See if an Adobe APP14 marker is present */ - - if (length >= ADOBE_LEN) { - for (buffp = 0; buffp < ADOBE_LEN; buffp++) - INPUT_BYTE(cinfo, b[buffp], return FALSE); - length -= ADOBE_LEN; - - if (b[0]==0x41 && b[1]==0x64 && b[2]==0x6F && b[3]==0x62 && b[4]==0x65) { - /* Found Adobe APP14 marker */ - version = (b[5] << 8) + b[6]; - flags0 = (b[7] << 8) + b[8]; - flags1 = (b[9] << 8) + b[10]; - transform = b[11]; - TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); - cinfo->saw_Adobe_marker = TRUE; - cinfo->Adobe_transform = (UINT8) transform; - } else { - /* Start of APP14 does not match "Adobe" */ - TRACEMS1(cinfo, 1, JTRC_APP14, (int) length + ADOBE_LEN); - } - } else { - /* Too short to be Adobe marker */ - TRACEMS1(cinfo, 1, JTRC_APP14, (int) length); - } - - INPUT_SYNC(cinfo); - if (length > 0) /* skip any remaining data -- could be lots */ - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -LOCAL boolean -get_dac (j_decompress_ptr cinfo) -/* Process a DAC marker */ -{ - INT32 length; - int index, val; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, index, return FALSE); - INPUT_BYTE(cinfo, val, return FALSE); - - length -= 2; - - TRACEMS2(cinfo, 1, JTRC_DAC, index, val); - - if (index < 0 || index >= (2*NUM_ARITH_TBLS)) - ERREXIT1(cinfo, JERR_DAC_INDEX, index); - - if (index >= NUM_ARITH_TBLS) { /* define AC table */ - cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; - } else { /* define DC table */ - cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); - cinfo->arith_dc_U[index] = (UINT8) (val >> 4); - if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) - ERREXIT1(cinfo, JERR_DAC_VALUE, val); - } - } - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_dht (j_decompress_ptr cinfo) -/* Process a DHT marker */ -{ - INT32 length; - UINT8 bits[17]; - UINT8 huffval[256]; - int i, index, count; - JHUFF_TBL **htblptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, index, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DHT, index); - - bits[0] = 0; - count = 0; - for (i = 1; i <= 16; i++) { - INPUT_BYTE(cinfo, bits[i], return FALSE); - count += bits[i]; - } - - length -= 1 + 16; - - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[1], bits[2], bits[3], bits[4], - bits[5], bits[6], bits[7], bits[8]); - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[9], bits[10], bits[11], bits[12], - bits[13], bits[14], bits[15], bits[16]); - - if (count > 256 || ((INT32) count) > length) - ERREXIT(cinfo, JERR_DHT_COUNTS); - - for (i = 0; i < count; i++) - INPUT_BYTE(cinfo, huffval[i], return FALSE); - - length -= count; - - if (index & 0x10) { /* AC table definition */ - index -= 0x10; - htblptr = &cinfo->ac_huff_tbl_ptrs[index]; - } else { /* DC table definition */ - htblptr = &cinfo->dc_huff_tbl_ptrs[index]; - } - - if (index < 0 || index >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_DHT_INDEX, index); - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); - } - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_dqt (j_decompress_ptr cinfo) -/* Process a DQT marker */ -{ - INT32 length; - int n, i, prec; - unsigned int tmp; - JQUANT_TBL *quant_ptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, n, return FALSE); - prec = n >> 4; - n &= 0x0F; - - TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); - - if (n >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, n); - - if (cinfo->quant_tbl_ptrs[n] == NULL) - cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); - quant_ptr = cinfo->quant_tbl_ptrs[n]; - - for (i = 0; i < DCTSIZE2; i++) { - if (prec) - INPUT_2BYTES(cinfo, tmp, return FALSE); - else - INPUT_BYTE(cinfo, tmp, return FALSE); - quant_ptr->quantval[i] = (UINT16) tmp; - } - - for (i = 0; i < DCTSIZE2; i += 8) { - TRACEMS8(cinfo, 2, JTRC_QUANTVALS, - quant_ptr->quantval[i ], quant_ptr->quantval[i+1], - quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], - quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], - quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); - } - - length -= DCTSIZE2+1; - if (prec) length -= DCTSIZE2; - } - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_dri (j_decompress_ptr cinfo) -/* Process a DRI marker */ -{ - INT32 length; - unsigned int tmp; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - - if (length != 4) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_2BYTES(cinfo, tmp, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DRI, tmp); - - cinfo->restart_interval = tmp; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -METHODDEF boolean -skip_variable (j_decompress_ptr cinfo) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - INT32 length; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - - TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); - - INPUT_SYNC(cinfo); /* do before skip_input_data */ - (*cinfo->src->skip_input_data) (cinfo, (long) length - 2L); - - return TRUE; -} - - -/* - * Find the next JPEG marker, save it in cinfo->unread_marker. - * Returns FALSE if had to suspend before reaching a marker; - * in that case cinfo->unread_marker is unchanged. - * - * Note that the result might not be a valid marker code, - * but it will never be 0 or FF. - */ - -LOCAL boolean -next_marker (j_decompress_ptr cinfo) -{ - int c; - INPUT_VARS(cinfo); - - for (;;) { - INPUT_BYTE(cinfo, c, return FALSE); - /* Skip any non-FF bytes. - * This may look a bit inefficient, but it will not occur in a valid file. - * We sync after each discarded byte so that a suspending data source - * can discard the byte from its buffer. - */ - while (c != 0xFF) { - cinfo->marker->discarded_bytes++; - INPUT_SYNC(cinfo); - INPUT_BYTE(cinfo, c, return FALSE); - } - /* This loop swallows any duplicate FF bytes. Extra FFs are legal as - * pad bytes, so don't count them in discarded_bytes. We assume there - * will not be so many consecutive FF bytes as to overflow a suspending - * data source's input buffer. - */ - do { - INPUT_BYTE(cinfo, c, return FALSE); - } while (c == 0xFF); - if (c != 0) - break; /* found a valid marker, exit loop */ - /* Reach here if we found a stuffed-zero data sequence (FF/00). - * Discard it and loop back to try again. - */ - cinfo->marker->discarded_bytes += 2; - INPUT_SYNC(cinfo); - } - - if (cinfo->marker->discarded_bytes != 0) { - WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); - cinfo->marker->discarded_bytes = 0; - } - - cinfo->unread_marker = c; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -first_marker (j_decompress_ptr cinfo) -/* Like next_marker, but used to obtain the initial SOI marker. */ -/* For this marker, we do not allow preceding garbage or fill; otherwise, - * we might well scan an entire input file before realizing it ain't JPEG. - * If an application wants to process non-JFIF files, it must seek to the - * SOI before calling the JPEG library. - */ -{ - int c, c2; - INPUT_VARS(cinfo); - - INPUT_BYTE(cinfo, c, return FALSE); - INPUT_BYTE(cinfo, c2, return FALSE); - if (c != 0xFF || c2 != (int) M_SOI) - ERREXIT2(cinfo, JERR_NO_SOI, c, c2); - - cinfo->unread_marker = c2; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -/* - * Read markers until SOS or EOI. - * - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - -METHODDEF int -read_markers (j_decompress_ptr cinfo) -{ - /* Outer loop repeats once for each marker. */ - for (;;) { - /* Collect the marker proper, unless we already did. */ - /* NB: first_marker() enforces the requirement that SOI appear first. */ - if (cinfo->unread_marker == 0) { - if (! cinfo->marker->saw_SOI) { - if (! first_marker(cinfo)) - return JPEG_SUSPENDED; - } else { - if (! next_marker(cinfo)) - return JPEG_SUSPENDED; - } - } - /* At this point cinfo->unread_marker contains the marker code and the - * input point is just past the marker proper, but before any parameters. - * A suspension will cause us to return with this state still true. - */ - switch (cinfo->unread_marker) { - case M_SOI: - if (! get_soi(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - if (! get_sof(cinfo, FALSE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF2: /* Progressive, Huffman */ - if (! get_sof(cinfo, TRUE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF9: /* Extended sequential, arithmetic */ - if (! get_sof(cinfo, FALSE, TRUE)) - return JPEG_SUSPENDED; - break; - - case M_SOF10: /* Progressive, arithmetic */ - if (! get_sof(cinfo, TRUE, TRUE)) - return JPEG_SUSPENDED; - break; - - /* Currently unsupported SOFn types */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_JPG: /* Reserved for JPEG extensions */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); - break; - - case M_SOS: - if (! get_sos(cinfo)) - return JPEG_SUSPENDED; - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_SOS; - - case M_EOI: - TRACEMS(cinfo, 1, JTRC_EOI); - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_EOI; - - case M_DAC: - if (! get_dac(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DHT: - if (! get_dht(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DQT: - if (! get_dqt(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DRI: - if (! get_dri(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_APP0: - case M_APP1: - case M_APP2: - case M_APP3: - case M_APP4: - case M_APP5: - case M_APP6: - case M_APP7: - case M_APP8: - case M_APP9: - case M_APP10: - case M_APP11: - case M_APP12: - case M_APP13: - case M_APP14: - case M_APP15: - if (! (*cinfo->marker->process_APPn[cinfo->unread_marker - (int) M_APP0]) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_COM: - if (! (*cinfo->marker->process_COM) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_RST0: /* these are all parameterless */ - case M_RST1: - case M_RST2: - case M_RST3: - case M_RST4: - case M_RST5: - case M_RST6: - case M_RST7: - case M_TEM: - TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); - break; - - case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ - if (! skip_variable(cinfo)) - return JPEG_SUSPENDED; - break; - - default: /* must be DHP, EXP, JPGn, or RESn */ - /* For now, we treat the reserved markers as fatal errors since they are - * likely to be used to signal incompatible JPEG Part 3 extensions. - * Once the JPEG 3 version-number marker is well defined, this code - * ought to change! - */ - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; - } - /* Successfully processed marker, so reset state variable */ - cinfo->unread_marker = 0; - } /* end loop */ -} - - -/* - * Read a restart marker, which is expected to appear next in the datastream; - * if the marker is not there, take appropriate recovery action. - * Returns FALSE if suspension is required. - * - * This is called by the entropy decoder after it has read an appropriate - * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder - * has already read a marker from the data source. Under normal conditions - * cinfo->unread_marker will be reset to 0 before returning; if not reset, - * it holds a marker which the decoder will be unable to read past. - */ - -METHODDEF boolean -read_restart_marker (j_decompress_ptr cinfo) -{ - /* Obtain a marker unless we already did. */ - /* Note that next_marker will complain if it skips any data. */ - if (cinfo->unread_marker == 0) { - if (! next_marker(cinfo)) - return FALSE; - } - - if (cinfo->unread_marker == - ((int) M_RST0 + cinfo->marker->next_restart_num)) { - /* Normal case --- swallow the marker and let entropy decoder continue */ - TRACEMS1(cinfo, 2, JTRC_RST, cinfo->marker->next_restart_num); - cinfo->unread_marker = 0; - } else { - /* Uh-oh, the restart markers have been messed up. */ - /* Let the data source manager determine how to resync. */ - if (! (*cinfo->src->resync_to_restart) (cinfo, - cinfo->marker->next_restart_num)) - return FALSE; - } - - /* Update next-restart state */ - cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; - - return TRUE; -} - - -/* - * This is the default resync_to_restart method for data source managers - * to use if they don't have any better approach. Some data source managers - * may be able to back up, or may have additional knowledge about the data - * which permits a more intelligent recovery strategy; such managers would - * presumably supply their own resync method. - * - * read_restart_marker calls resync_to_restart if it finds a marker other than - * the restart marker it was expecting. (This code is *not* used unless - * a nonzero restart interval has been declared.) cinfo->unread_marker is - * the marker code actually found (might be anything, except 0 or FF). - * The desired restart marker number (0..7) is passed as a parameter. - * This routine is supposed to apply whatever error recovery strategy seems - * appropriate in order to position the input stream to the next data segment. - * Note that cinfo->unread_marker is treated as a marker appearing before - * the current data-source input point; usually it should be reset to zero - * before returning. - * Returns FALSE if suspension is required. - * - * This implementation is substantially constrained by wanting to treat the - * input as a data stream; this means we can't back up. Therefore, we have - * only the following actions to work with: - * 1. Simply discard the marker and let the entropy decoder resume at next - * byte of file. - * 2. Read forward until we find another marker, discarding intervening - * data. (In theory we could look ahead within the current bufferload, - * without having to discard data if we don't find the desired marker. - * This idea is not implemented here, in part because it makes behavior - * dependent on buffer size and chance buffer-boundary positions.) - * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). - * This will cause the entropy decoder to process an empty data segment, - * inserting dummy zeroes, and then we will reprocess the marker. - * - * #2 is appropriate if we think the desired marker lies ahead, while #3 is - * appropriate if the found marker is a future restart marker (indicating - * that we have missed the desired restart marker, probably because it got - * corrupted). - * We apply #2 or #3 if the found marker is a restart marker no more than - * two counts behind or ahead of the expected one. We also apply #2 if the - * found marker is not a legal JPEG marker code (it's certainly bogus data). - * If the found marker is a restart marker more than 2 counts away, we do #1 - * (too much risk that the marker is erroneous; with luck we will be able to - * resync at some future point). - * For any valid non-restart JPEG marker, we apply #3. This keeps us from - * overrunning the end of a scan. An implementation limited to single-scan - * files might find it better to apply #2 for markers other than EOI, since - * any other marker would have to be bogus data in that case. - */ - -GLOBAL boolean -jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) -{ - int marker = cinfo->unread_marker; - int action = 1; - - /* Always put up a warning. */ - WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); - - /* Outer loop handles repeated decision after scanning forward. */ - for (;;) { - if (marker < (int) M_SOF0) - action = 2; /* invalid marker */ - else if (marker < (int) M_RST0 || marker > (int) M_RST7) - action = 3; /* valid non-restart marker */ - else { - if (marker == ((int) M_RST0 + ((desired+1) & 7)) || - marker == ((int) M_RST0 + ((desired+2) & 7))) - action = 3; /* one of the next two expected restarts */ - else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || - marker == ((int) M_RST0 + ((desired-2) & 7))) - action = 2; /* a prior restart, so advance */ - else - action = 1; /* desired restart or too far away */ - } - TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); - switch (action) { - case 1: - /* Discard marker and let entropy decoder resume processing. */ - cinfo->unread_marker = 0; - return TRUE; - case 2: - /* Scan to the next marker, and repeat the decision loop. */ - if (! next_marker(cinfo)) - return FALSE; - marker = cinfo->unread_marker; - break; - case 3: - /* Return without advancing past this marker. */ - /* Entropy decoder will be forced to process an empty segment. */ - return TRUE; - } - } /* end loop */ -} - - -/* - * Reset marker processing state to begin a fresh datastream. - */ - -METHODDEF void -reset_marker_reader (j_decompress_ptr cinfo) -{ - cinfo->comp_info = NULL; /* until allocated by get_sof */ - cinfo->input_scan_number = 0; /* no SOS seen yet */ - cinfo->unread_marker = 0; /* no pending marker */ - cinfo->marker->saw_SOI = FALSE; /* set internal state too */ - cinfo->marker->saw_SOF = FALSE; - cinfo->marker->discarded_bytes = 0; -} - - -/* - * Initialize the marker reader module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL void -jinit_marker_reader (j_decompress_ptr cinfo) -{ - int i; - - /* Create subobject in permanent pool */ - cinfo->marker = (struct jpeg_marker_reader *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(struct jpeg_marker_reader)); - /* Initialize method pointers */ - cinfo->marker->reset_marker_reader = reset_marker_reader; - cinfo->marker->read_markers = read_markers; - cinfo->marker->read_restart_marker = read_restart_marker; - cinfo->marker->process_COM = skip_variable; - for (i = 0; i < 16; i++) - cinfo->marker->process_APPn[i] = skip_variable; - cinfo->marker->process_APPn[0] = get_app0; - cinfo->marker->process_APPn[14] = get_app14; - /* Reset marker processing state */ - reset_marker_reader(cinfo); -} +/* + * jdmarker.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to decode JPEG datastream markers. + * Most of the complexity arises from our desire to support input + * suspension: if not all of the data for a marker is available, + * we must exit back to the application. On resumption, we reprocess + * the marker. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* + * Macros for fetching data from the data source module. + * + * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect + * the current restart point; we update them only when we have reached a + * suitable place to restart if a suspension occurs. + */ + +/* Declare and initialize local copies of input pointer/count */ +#define INPUT_VARS(cinfo) \ + struct jpeg_source_mgr * datasrc = (cinfo)->src; \ + const JOCTET * next_input_byte = datasrc->next_input_byte; \ + size_t bytes_in_buffer = datasrc->bytes_in_buffer + +/* Unload the local copies --- do this only at a restart boundary */ +#define INPUT_SYNC(cinfo) \ + ( datasrc->next_input_byte = next_input_byte, \ + datasrc->bytes_in_buffer = bytes_in_buffer ) + +/* Reload the local copies --- seldom used except in MAKE_BYTE_AVAIL */ +#define INPUT_RELOAD(cinfo) \ + ( next_input_byte = datasrc->next_input_byte, \ + bytes_in_buffer = datasrc->bytes_in_buffer ) + +/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. + * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, + * but we must reload the local copies after a successful fill. + */ +#define MAKE_BYTE_AVAIL(cinfo,action) \ + if (bytes_in_buffer == 0) { \ + if (! (*datasrc->fill_input_buffer) (cinfo)) \ + { action; } \ + INPUT_RELOAD(cinfo); \ + } \ + bytes_in_buffer-- + +/* Read a byte into variable V. + * If must suspend, take the specified action (typically "return FALSE"). + */ +#define INPUT_BYTE(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + V = GETJOCTET(*next_input_byte++); ) + +/* As above, but read two bytes interpreted as an unsigned 16-bit integer. + * V should be declared unsigned int or perhaps INT32. + */ +#define INPUT_2BYTES(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ + MAKE_BYTE_AVAIL(cinfo,action); \ + V += GETJOCTET(*next_input_byte++); ) + + +/* + * Routines to process JPEG markers. + * + * Entry condition: JPEG marker itself has been read and its code saved + * in cinfo->unread_marker; input restart point is just after the marker. + * + * Exit: if return TRUE, have read and processed any parameters, and have + * updated the restart point to point after the parameters. + * If return FALSE, was forced to suspend before reaching end of + * marker parameters; restart point has not been moved. Same routine + * will be called again after application supplies more input data. + * + * This approach to suspension assumes that all of a marker's parameters can + * fit into a single input bufferload. This should hold for "normal" + * markers. Some COM/APPn markers might have large parameter segments, + * but we use skip_input_data to get past those, and thereby put the problem + * on the source manager's shoulders. + * + * Note that we don't bother to avoid duplicate trace messages if a + * suspension occurs within marker parameters. Other side effects + * require more care. + */ + + +LOCAL boolean +get_soi (j_decompress_ptr cinfo) +/* Process an SOI marker */ +{ + int i; + + TRACEMS(cinfo, 1, JTRC_SOI); + + if (cinfo->marker->saw_SOI) + ERREXIT(cinfo, JERR_SOI_DUPLICATE); + + /* Reset all parameters that are defined to be reset by SOI */ + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + cinfo->restart_interval = 0; + + /* Set initial assumptions for colorspace etc */ + + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ + + cinfo->saw_JFIF_marker = FALSE; + cinfo->density_unit = 0; /* set default JFIF APP0 values */ + cinfo->X_density = 1; + cinfo->Y_density = 1; + cinfo->saw_Adobe_marker = FALSE; + cinfo->Adobe_transform = 0; + + cinfo->marker->saw_SOI = TRUE; + + return TRUE; +} + + +LOCAL boolean +get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith) +/* Process a SOFn marker */ +{ + INT32 length; + int c, ci; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + cinfo->progressive_mode = is_prog; + cinfo->arith_code = is_arith; + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); + INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); + + length -= 8; + + TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, + (int) cinfo->image_width, (int) cinfo->image_height, + cinfo->num_components); + + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_DUPLICATE); + + /* We don't support files in which the image height is initially specified */ + /* as 0 and is later redefined by DNL. As long as we have to check that, */ + /* might as well have a general sanity check. */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 + || cinfo->num_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + if (length != (cinfo->num_components * 3)) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + if (cinfo->comp_info == NULL) /* do only once, even if suspend */ + cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * SIZEOF(jpeg_component_info)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->component_index = ci; + INPUT_BYTE(cinfo, compptr->component_id, return FALSE); + INPUT_BYTE(cinfo, c, return FALSE); + compptr->h_samp_factor = (c >> 4) & 15; + compptr->v_samp_factor = (c ) & 15; + INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); + + TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, + compptr->component_id, compptr->h_samp_factor, + compptr->v_samp_factor, compptr->quant_tbl_no); + } + + cinfo->marker->saw_SOF = TRUE; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL boolean +get_sos (j_decompress_ptr cinfo) +/* Process a SOS marker */ +{ + INT32 length; + int i, ci, n, c, cc; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOS_NO_SOF); + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ + + if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + TRACEMS1(cinfo, 1, JTRC_SOS, n); + + cinfo->comps_in_scan = n; + + /* Collect the component-spec parameters */ + + for (i = 0; i < n; i++) { + INPUT_BYTE(cinfo, cc, return FALSE); + INPUT_BYTE(cinfo, c, return FALSE); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (cc == compptr->component_id) + goto id_found; + } + + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); + + id_found: + + cinfo->cur_comp_info[i] = compptr; + compptr->dc_tbl_no = (c >> 4) & 15; + compptr->ac_tbl_no = (c ) & 15; + + TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, + compptr->dc_tbl_no, compptr->ac_tbl_no); + } + + /* Collect the additional scan parameters Ss, Se, Ah/Al. */ + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ss = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Se = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ah = (c >> 4) & 15; + cinfo->Al = (c ) & 15; + + TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, + cinfo->Ah, cinfo->Al); + + /* Prepare to scan data & restart markers */ + cinfo->marker->next_restart_num = 0; + + /* Count another SOS marker */ + cinfo->input_scan_number++; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +METHODDEF boolean +get_app0 (j_decompress_ptr cinfo) +/* Process an APP0 marker */ +{ +#define JFIF_LEN 14 + INT32 length; + UINT8 b[JFIF_LEN]; + int buffp; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + /* See if a JFIF APP0 marker is present */ + + if (length >= JFIF_LEN) { + for (buffp = 0; buffp < JFIF_LEN; buffp++) + INPUT_BYTE(cinfo, b[buffp], return FALSE); + length -= JFIF_LEN; + + if (b[0]==0x4A && b[1]==0x46 && b[2]==0x49 && b[3]==0x46 && b[4]==0) { + /* Found JFIF APP0 marker: check version */ + /* Major version must be 1, anything else signals an incompatible change. + * We used to treat this as an error, but now it's a nonfatal warning, + * because some bozo at Hijaak couldn't read the spec. + * Minor version should be 0..2, but process anyway if newer. + */ + if (b[5] != 1) + WARNMS2(cinfo, JWRN_JFIF_MAJOR, b[5], b[6]); + else if (b[6] > 2) + TRACEMS2(cinfo, 1, JTRC_JFIF_MINOR, b[5], b[6]); + /* Save info */ + cinfo->saw_JFIF_marker = TRUE; + cinfo->density_unit = b[7]; + cinfo->X_density = (b[8] << 8) + b[9]; + cinfo->Y_density = (b[10] << 8) + b[11]; + TRACEMS3(cinfo, 1, JTRC_JFIF, + cinfo->X_density, cinfo->Y_density, cinfo->density_unit); + if (b[12] | b[13]) + TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, b[12], b[13]); + if (length != ((INT32) b[12] * (INT32) b[13] * (INT32) 3)) + TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) length); + } else { + /* Start of APP0 does not match "JFIF" */ + TRACEMS1(cinfo, 1, JTRC_APP0, (int) length + JFIF_LEN); + } + } else { + /* Too short to be JFIF marker */ + TRACEMS1(cinfo, 1, JTRC_APP0, (int) length); + } + + INPUT_SYNC(cinfo); + if (length > 0) /* skip any remaining data -- could be lots */ + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +METHODDEF boolean +get_app14 (j_decompress_ptr cinfo) +/* Process an APP14 marker */ +{ +#define ADOBE_LEN 12 + INT32 length; + UINT8 b[ADOBE_LEN]; + int buffp; + unsigned int version, flags0, flags1, transform; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + /* See if an Adobe APP14 marker is present */ + + if (length >= ADOBE_LEN) { + for (buffp = 0; buffp < ADOBE_LEN; buffp++) + INPUT_BYTE(cinfo, b[buffp], return FALSE); + length -= ADOBE_LEN; + + if (b[0]==0x41 && b[1]==0x64 && b[2]==0x6F && b[3]==0x62 && b[4]==0x65) { + /* Found Adobe APP14 marker */ + version = (b[5] << 8) + b[6]; + flags0 = (b[7] << 8) + b[8]; + flags1 = (b[9] << 8) + b[10]; + transform = b[11]; + TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); + cinfo->saw_Adobe_marker = TRUE; + cinfo->Adobe_transform = (UINT8) transform; + } else { + /* Start of APP14 does not match "Adobe" */ + TRACEMS1(cinfo, 1, JTRC_APP14, (int) length + ADOBE_LEN); + } + } else { + /* Too short to be Adobe marker */ + TRACEMS1(cinfo, 1, JTRC_APP14, (int) length); + } + + INPUT_SYNC(cinfo); + if (length > 0) /* skip any remaining data -- could be lots */ + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +LOCAL boolean +get_dac (j_decompress_ptr cinfo) +/* Process a DAC marker */ +{ + INT32 length; + int index, val; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, index, return FALSE); + INPUT_BYTE(cinfo, val, return FALSE); + + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_DAC, index, val); + + if (index < 0 || index >= (2*NUM_ARITH_TBLS)) + ERREXIT1(cinfo, JERR_DAC_INDEX, index); + + if (index >= NUM_ARITH_TBLS) { /* define AC table */ + cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; + } else { /* define DC table */ + cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); + cinfo->arith_dc_U[index] = (UINT8) (val >> 4); + if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) + ERREXIT1(cinfo, JERR_DAC_VALUE, val); + } + } + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL boolean +get_dht (j_decompress_ptr cinfo) +/* Process a DHT marker */ +{ + INT32 length; + UINT8 bits[17]; + UINT8 huffval[256]; + int i, index, count; + JHUFF_TBL **htblptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, index, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DHT, index); + + bits[0] = 0; + count = 0; + for (i = 1; i <= 16; i++) { + INPUT_BYTE(cinfo, bits[i], return FALSE); + count += bits[i]; + } + + length -= 1 + 16; + + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[1], bits[2], bits[3], bits[4], + bits[5], bits[6], bits[7], bits[8]); + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[9], bits[10], bits[11], bits[12], + bits[13], bits[14], bits[15], bits[16]); + + if (count > 256 || ((INT32) count) > length) + ERREXIT(cinfo, JERR_DHT_COUNTS); + + for (i = 0; i < count; i++) + INPUT_BYTE(cinfo, huffval[i], return FALSE); + + length -= count; + + if (index & 0x10) { /* AC table definition */ + index -= 0x10; + htblptr = &cinfo->ac_huff_tbl_ptrs[index]; + } else { /* DC table definition */ + htblptr = &cinfo->dc_huff_tbl_ptrs[index]; + } + + if (index < 0 || index >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_DHT_INDEX, index); + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); + } + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL boolean +get_dqt (j_decompress_ptr cinfo) +/* Process a DQT marker */ +{ + INT32 length; + int n, i, prec; + unsigned int tmp; + JQUANT_TBL *quant_ptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, n, return FALSE); + prec = n >> 4; + n &= 0x0F; + + TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); + + if (n >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, n); + + if (cinfo->quant_tbl_ptrs[n] == NULL) + cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); + quant_ptr = cinfo->quant_tbl_ptrs[n]; + + for (i = 0; i < DCTSIZE2; i++) { + if (prec) + INPUT_2BYTES(cinfo, tmp, return FALSE); + else + INPUT_BYTE(cinfo, tmp, return FALSE); + quant_ptr->quantval[i] = (UINT16) tmp; + } + + for (i = 0; i < DCTSIZE2; i += 8) { + TRACEMS8(cinfo, 2, JTRC_QUANTVALS, + quant_ptr->quantval[i ], quant_ptr->quantval[i+1], + quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], + quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], + quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); + } + + length -= DCTSIZE2+1; + if (prec) length -= DCTSIZE2; + } + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL boolean +get_dri (j_decompress_ptr cinfo) +/* Process a DRI marker */ +{ + INT32 length; + unsigned int tmp; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 4) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_2BYTES(cinfo, tmp, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DRI, tmp); + + cinfo->restart_interval = tmp; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +METHODDEF boolean +skip_variable (j_decompress_ptr cinfo) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + INT32 length; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); + + INPUT_SYNC(cinfo); /* do before skip_input_data */ + (*cinfo->src->skip_input_data) (cinfo, (long) length - 2L); + + return TRUE; +} + + +/* + * Find the next JPEG marker, save it in cinfo->unread_marker. + * Returns FALSE if had to suspend before reaching a marker; + * in that case cinfo->unread_marker is unchanged. + * + * Note that the result might not be a valid marker code, + * but it will never be 0 or FF. + */ + +LOCAL boolean +next_marker (j_decompress_ptr cinfo) +{ + int c; + INPUT_VARS(cinfo); + + for (;;) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Skip any non-FF bytes. + * This may look a bit inefficient, but it will not occur in a valid file. + * We sync after each discarded byte so that a suspending data source + * can discard the byte from its buffer. + */ + while (c != 0xFF) { + cinfo->marker->discarded_bytes++; + INPUT_SYNC(cinfo); + INPUT_BYTE(cinfo, c, return FALSE); + } + /* This loop swallows any duplicate FF bytes. Extra FFs are legal as + * pad bytes, so don't count them in discarded_bytes. We assume there + * will not be so many consecutive FF bytes as to overflow a suspending + * data source's input buffer. + */ + do { + INPUT_BYTE(cinfo, c, return FALSE); + } while (c == 0xFF); + if (c != 0) + break; /* found a valid marker, exit loop */ + /* Reach here if we found a stuffed-zero data sequence (FF/00). + * Discard it and loop back to try again. + */ + cinfo->marker->discarded_bytes += 2; + INPUT_SYNC(cinfo); + } + + if (cinfo->marker->discarded_bytes != 0) { + WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); + cinfo->marker->discarded_bytes = 0; + } + + cinfo->unread_marker = c; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL boolean +first_marker (j_decompress_ptr cinfo) +/* Like next_marker, but used to obtain the initial SOI marker. */ +/* For this marker, we do not allow preceding garbage or fill; otherwise, + * we might well scan an entire input file before realizing it ain't JPEG. + * If an application wants to process non-JFIF files, it must seek to the + * SOI before calling the JPEG library. + */ +{ + int c, c2; + INPUT_VARS(cinfo); + + INPUT_BYTE(cinfo, c, return FALSE); + INPUT_BYTE(cinfo, c2, return FALSE); + if (c != 0xFF || c2 != (int) M_SOI) + ERREXIT2(cinfo, JERR_NO_SOI, c, c2); + + cinfo->unread_marker = c2; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Read markers until SOS or EOI. + * + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + +METHODDEF int +read_markers (j_decompress_ptr cinfo) +{ + /* Outer loop repeats once for each marker. */ + for (;;) { + /* Collect the marker proper, unless we already did. */ + /* NB: first_marker() enforces the requirement that SOI appear first. */ + if (cinfo->unread_marker == 0) { + if (! cinfo->marker->saw_SOI) { + if (! first_marker(cinfo)) + return JPEG_SUSPENDED; + } else { + if (! next_marker(cinfo)) + return JPEG_SUSPENDED; + } + } + /* At this point cinfo->unread_marker contains the marker code and the + * input point is just past the marker proper, but before any parameters. + * A suspension will cause us to return with this state still true. + */ + switch (cinfo->unread_marker) { + case M_SOI: + if (! get_soi(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + if (! get_sof(cinfo, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF2: /* Progressive, Huffman */ + if (! get_sof(cinfo, TRUE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF9: /* Extended sequential, arithmetic */ + if (! get_sof(cinfo, FALSE, TRUE)) + return JPEG_SUSPENDED; + break; + + case M_SOF10: /* Progressive, arithmetic */ + if (! get_sof(cinfo, TRUE, TRUE)) + return JPEG_SUSPENDED; + break; + + /* Currently unsupported SOFn types */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_JPG: /* Reserved for JPEG extensions */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); + break; + + case M_SOS: + if (! get_sos(cinfo)) + return JPEG_SUSPENDED; + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_SOS; + + case M_EOI: + TRACEMS(cinfo, 1, JTRC_EOI); + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_EOI; + + case M_DAC: + if (! get_dac(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DHT: + if (! get_dht(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DQT: + if (! get_dqt(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DRI: + if (! get_dri(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_APP0: + case M_APP1: + case M_APP2: + case M_APP3: + case M_APP4: + case M_APP5: + case M_APP6: + case M_APP7: + case M_APP8: + case M_APP9: + case M_APP10: + case M_APP11: + case M_APP12: + case M_APP13: + case M_APP14: + case M_APP15: + if (! (*cinfo->marker->process_APPn[cinfo->unread_marker - (int) M_APP0]) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_COM: + if (! (*cinfo->marker->process_COM) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_RST0: /* these are all parameterless */ + case M_RST1: + case M_RST2: + case M_RST3: + case M_RST4: + case M_RST5: + case M_RST6: + case M_RST7: + case M_TEM: + TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); + break; + + case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ + if (! skip_variable(cinfo)) + return JPEG_SUSPENDED; + break; + + default: /* must be DHP, EXP, JPGn, or RESn */ + /* For now, we treat the reserved markers as fatal errors since they are + * likely to be used to signal incompatible JPEG Part 3 extensions. + * Once the JPEG 3 version-number marker is well defined, this code + * ought to change! + */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + /* Successfully processed marker, so reset state variable */ + cinfo->unread_marker = 0; + } /* end loop */ +} + + +/* + * Read a restart marker, which is expected to appear next in the datastream; + * if the marker is not there, take appropriate recovery action. + * Returns FALSE if suspension is required. + * + * This is called by the entropy decoder after it has read an appropriate + * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder + * has already read a marker from the data source. Under normal conditions + * cinfo->unread_marker will be reset to 0 before returning; if not reset, + * it holds a marker which the decoder will be unable to read past. + */ + +METHODDEF boolean +read_restart_marker (j_decompress_ptr cinfo) +{ + /* Obtain a marker unless we already did. */ + /* Note that next_marker will complain if it skips any data. */ + if (cinfo->unread_marker == 0) { + if (! next_marker(cinfo)) + return FALSE; + } + + if (cinfo->unread_marker == + ((int) M_RST0 + cinfo->marker->next_restart_num)) { + /* Normal case --- swallow the marker and let entropy decoder continue */ + TRACEMS1(cinfo, 2, JTRC_RST, cinfo->marker->next_restart_num); + cinfo->unread_marker = 0; + } else { + /* Uh-oh, the restart markers have been messed up. */ + /* Let the data source manager determine how to resync. */ + if (! (*cinfo->src->resync_to_restart) (cinfo, + cinfo->marker->next_restart_num)) + return FALSE; + } + + /* Update next-restart state */ + cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; + + return TRUE; +} + + +/* + * This is the default resync_to_restart method for data source managers + * to use if they don't have any better approach. Some data source managers + * may be able to back up, or may have additional knowledge about the data + * which permits a more intelligent recovery strategy; such managers would + * presumably supply their own resync method. + * + * read_restart_marker calls resync_to_restart if it finds a marker other than + * the restart marker it was expecting. (This code is *not* used unless + * a nonzero restart interval has been declared.) cinfo->unread_marker is + * the marker code actually found (might be anything, except 0 or FF). + * The desired restart marker number (0..7) is passed as a parameter. + * This routine is supposed to apply whatever error recovery strategy seems + * appropriate in order to position the input stream to the next data segment. + * Note that cinfo->unread_marker is treated as a marker appearing before + * the current data-source input point; usually it should be reset to zero + * before returning. + * Returns FALSE if suspension is required. + * + * This implementation is substantially constrained by wanting to treat the + * input as a data stream; this means we can't back up. Therefore, we have + * only the following actions to work with: + * 1. Simply discard the marker and let the entropy decoder resume at next + * byte of file. + * 2. Read forward until we find another marker, discarding intervening + * data. (In theory we could look ahead within the current bufferload, + * without having to discard data if we don't find the desired marker. + * This idea is not implemented here, in part because it makes behavior + * dependent on buffer size and chance buffer-boundary positions.) + * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). + * This will cause the entropy decoder to process an empty data segment, + * inserting dummy zeroes, and then we will reprocess the marker. + * + * #2 is appropriate if we think the desired marker lies ahead, while #3 is + * appropriate if the found marker is a future restart marker (indicating + * that we have missed the desired restart marker, probably because it got + * corrupted). + * We apply #2 or #3 if the found marker is a restart marker no more than + * two counts behind or ahead of the expected one. We also apply #2 if the + * found marker is not a legal JPEG marker code (it's certainly bogus data). + * If the found marker is a restart marker more than 2 counts away, we do #1 + * (too much risk that the marker is erroneous; with luck we will be able to + * resync at some future point). + * For any valid non-restart JPEG marker, we apply #3. This keeps us from + * overrunning the end of a scan. An implementation limited to single-scan + * files might find it better to apply #2 for markers other than EOI, since + * any other marker would have to be bogus data in that case. + */ + +GLOBAL boolean +jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) +{ + int marker = cinfo->unread_marker; + int action = 1; + + /* Always put up a warning. */ + WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); + + /* Outer loop handles repeated decision after scanning forward. */ + for (;;) { + if (marker < (int) M_SOF0) + action = 2; /* invalid marker */ + else if (marker < (int) M_RST0 || marker > (int) M_RST7) + action = 3; /* valid non-restart marker */ + else { + if (marker == ((int) M_RST0 + ((desired+1) & 7)) || + marker == ((int) M_RST0 + ((desired+2) & 7))) + action = 3; /* one of the next two expected restarts */ + else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || + marker == ((int) M_RST0 + ((desired-2) & 7))) + action = 2; /* a prior restart, so advance */ + else + action = 1; /* desired restart or too far away */ + } + TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); + switch (action) { + case 1: + /* Discard marker and let entropy decoder resume processing. */ + cinfo->unread_marker = 0; + return TRUE; + case 2: + /* Scan to the next marker, and repeat the decision loop. */ + if (! next_marker(cinfo)) + return FALSE; + marker = cinfo->unread_marker; + break; + case 3: + /* Return without advancing past this marker. */ + /* Entropy decoder will be forced to process an empty segment. */ + return TRUE; + } + } /* end loop */ +} + + +/* + * Reset marker processing state to begin a fresh datastream. + */ + +METHODDEF void +reset_marker_reader (j_decompress_ptr cinfo) +{ + cinfo->comp_info = NULL; /* until allocated by get_sof */ + cinfo->input_scan_number = 0; /* no SOS seen yet */ + cinfo->unread_marker = 0; /* no pending marker */ + cinfo->marker->saw_SOI = FALSE; /* set internal state too */ + cinfo->marker->saw_SOF = FALSE; + cinfo->marker->discarded_bytes = 0; +} + + +/* + * Initialize the marker reader module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL void +jinit_marker_reader (j_decompress_ptr cinfo) +{ + int i; + + /* Create subobject in permanent pool */ + cinfo->marker = (struct jpeg_marker_reader *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(struct jpeg_marker_reader)); + /* Initialize method pointers */ + cinfo->marker->reset_marker_reader = reset_marker_reader; + cinfo->marker->read_markers = read_markers; + cinfo->marker->read_restart_marker = read_restart_marker; + cinfo->marker->process_COM = skip_variable; + for (i = 0; i < 16; i++) + cinfo->marker->process_APPn[i] = skip_variable; + cinfo->marker->process_APPn[0] = get_app0; + cinfo->marker->process_APPn[14] = get_app14; + /* Reset marker processing state */ + reset_marker_reader(cinfo); +} diff --git a/libs/jpeg6/jdmaster.cpp b/libs/jpeg6/jdmaster.cpp index 64f730f..18e0880 100755 --- a/libs/jpeg6/jdmaster.cpp +++ b/libs/jpeg6/jdmaster.cpp @@ -1,557 +1,557 @@ -/* - * jdmaster.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG decompressor. - * These routines are concerned with selecting the modules to be executed - * and with determining the number of passes and the work to be done in each - * pass. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_decomp_master pub; /* public fields */ - - int pass_number; /* # of passes completed */ - - boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ - - /* Saved references to initialized quantizer modules, - * in case we need to switch modes. - */ - struct jpeg_color_quantizer * quantizer_1pass; - struct jpeg_color_quantizer * quantizer_2pass; -} my_decomp_master; - -typedef my_decomp_master * my_master_ptr; - - -/* - * Determine whether merged upsample/color conversion should be used. - * CRUCIAL: this must match the actual capabilities of jdmerge.c! - */ - -LOCAL boolean -use_merged_upsample (j_decompress_ptr cinfo) -{ -#ifdef UPSAMPLE_MERGING_SUPPORTED - /* Merging is the equivalent of plain box-filter upsampling */ - if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) - return FALSE; - /* jdmerge.c only supports YCC=>RGB color conversion */ - if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || - cinfo->out_color_space != JCS_RGB || - cinfo->out_color_components != RGB_PIXELSIZE) - return FALSE; - /* and it only handles 2h1v or 2h2v sampling ratios */ - if (cinfo->comp_info[0].h_samp_factor != 2 || - cinfo->comp_info[1].h_samp_factor != 1 || - cinfo->comp_info[2].h_samp_factor != 1 || - cinfo->comp_info[0].v_samp_factor > 2 || - cinfo->comp_info[1].v_samp_factor != 1 || - cinfo->comp_info[2].v_samp_factor != 1) - return FALSE; - /* furthermore, it doesn't work if we've scaled the IDCTs differently */ - if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) - return FALSE; - /* ??? also need to test for upsample-time rescaling, when & if supported */ - return TRUE; /* by golly, it'll work... */ -#else - return FALSE; -#endif -} - - -/* - * Compute output image dimensions and related values. - * NOTE: this is exported for possible use by application. - * Hence it mustn't do anything that can't be done twice. - * Also note that it may be called before the master module is initialized! - */ - -GLOBAL void -jpeg_calc_output_dimensions (j_decompress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ -#if 0 // JDC: commented out to remove warning - int ci; - jpeg_component_info *compptr; -#endif - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_READY) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - -#ifdef IDCT_SCALING_SUPPORTED - - /* Compute actual output image dimensions and DCT scaling choices. */ - if (cinfo->scale_num * 8 <= cinfo->scale_denom) { - /* Provide 1/8 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 8L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 8L); - cinfo->min_DCT_scaled_size = 1; - } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { - /* Provide 1/4 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 4L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 4L); - cinfo->min_DCT_scaled_size = 2; - } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { - /* Provide 1/2 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 2L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 2L); - cinfo->min_DCT_scaled_size = 4; - } else { - /* Provide 1/1 scaling */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - cinfo->min_DCT_scaled_size = DCTSIZE; - } - /* In selecting the actual DCT scaling for each component, we try to - * scale up the chroma components via IDCT scaling rather than upsampling. - * This saves time if the upsampler gets to use 1:1 scaling. - * Note this code assumes that the supported DCT scalings are powers of 2. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - int ssize = cinfo->min_DCT_scaled_size; - while (ssize < DCTSIZE && - (compptr->h_samp_factor * ssize * 2 <= - cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && - (compptr->v_samp_factor * ssize * 2 <= - cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { - ssize = ssize * 2; - } - compptr->DCT_scaled_size = ssize; - } - - /* Recompute downsampled dimensions of components; - * application needs to know these if using raw downsampled data. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Size in samples, after IDCT scaling */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * - (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * - (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - } - -#else /* !IDCT_SCALING_SUPPORTED */ - - /* Hardwire it to "no scaling" */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, - * and has computed unscaled downsampled_width and downsampled_height. - */ - -#endif /* IDCT_SCALING_SUPPORTED */ - - /* Report number of components in selected colorspace. */ - /* Probably this should be in the color conversion module... */ - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - break; - case JCS_RGB: -#if RGB_PIXELSIZE != 3 - cinfo->out_color_components = RGB_PIXELSIZE; - break; -#endif /* else share code with YCbCr */ - case JCS_YCbCr: - cinfo->out_color_components = 3; - break; - case JCS_CMYK: - case JCS_YCCK: - cinfo->out_color_components = 4; - break; - default: /* else must be same colorspace as in file */ - cinfo->out_color_components = cinfo->num_components; - break; - } - cinfo->output_components = (cinfo->quantize_colors ? 1 : - cinfo->out_color_components); - - /* See if upsampler will want to emit more than one row at a time */ - if (use_merged_upsample(cinfo)) - cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; - else - cinfo->rec_outbuf_height = 1; -} - - -/* - * Several decompression processes need to range-limit values to the range - * 0..MAXJSAMPLE; the input value may fall somewhat outside this range - * due to noise introduced by quantization, roundoff error, etc. These - * processes are inner loops and need to be as fast as possible. On most - * machines, particularly CPUs with pipelines or instruction prefetch, - * a (subscript-check-less) C table lookup - * x = sample_range_limit[x]; - * is faster than explicit tests - * if (x < 0) x = 0; - * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; - * These processes all use a common table prepared by the routine below. - * - * For most steps we can mathematically guarantee that the initial value - * of x is within MAXJSAMPLE+1 of the legal range, so a table running from - * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial - * limiting step (just after the IDCT), a wildly out-of-range value is - * possible if the input data is corrupt. To avoid any chance of indexing - * off the end of memory and getting a bad-pointer trap, we perform the - * post-IDCT limiting thus: - * x = range_limit[x & MASK]; - * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit - * samples. Under normal circumstances this is more than enough range and - * a correct output will be generated; with bogus input data the mask will - * cause wraparound, and we will safely generate a bogus-but-in-range output. - * For the post-IDCT step, we want to convert the data from signed to unsigned - * representation by adding CENTERJSAMPLE at the same time that we limit it. - * So the post-IDCT limiting table ends up looking like this: - * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, - * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0,1,...,CENTERJSAMPLE-1 - * Negative inputs select values from the upper half of the table after - * masking. - * - * We can save some space by overlapping the start of the post-IDCT table - * with the simpler range limiting table. The post-IDCT table begins at - * sample_range_limit + CENTERJSAMPLE. - * - * Note that the table is allocated in near data space on PCs; it's small - * enough and used often enough to justify this. - */ - -LOCAL void -prepare_range_limit_table (j_decompress_ptr cinfo) -/* Allocate and fill in the sample_range_limit table */ -{ - JSAMPLE * table; - int i; - - table = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ - cinfo->sample_range_limit = table; - /* First segment of "simple" table: limit[x] = 0 for x < 0 */ - MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); - /* Main part of "simple" table: limit[x] = x */ - for (i = 0; i <= MAXJSAMPLE; i++) - table[i] = (JSAMPLE) i; - table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ - /* End of simple table, rest of first half of post-IDCT table */ - for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) - table[i] = MAXJSAMPLE; - /* Second half of post-IDCT table */ - MEMZERO(table + (2 * (MAXJSAMPLE+1)), - (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), - cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); -} - - -/* - * Master selection of decompression modules. - * This is done once at jpeg_start_decompress time. We determine - * which modules will be used and give them appropriate initialization calls. - * We also initialize the decompressor input side to begin consuming data. - * - * Since jpeg_read_header has finished, we know what is in the SOF - * and (first) SOS markers. We also have all the application parameter - * settings. - */ - -LOCAL void -master_selection (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - boolean use_c_buffer; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Initialize dimensions and other stuff */ - jpeg_calc_output_dimensions(cinfo); - prepare_range_limit_table(cinfo); - - /* Width of an output scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* Initialize my private state */ - master->pass_number = 0; - master->using_merged_upsample = use_merged_upsample(cinfo); - - /* Color quantizer selection */ - master->quantizer_1pass = NULL; - master->quantizer_2pass = NULL; - /* No mode changes if not using buffered-image mode. */ - if (! cinfo->quantize_colors || ! cinfo->buffered_image) { - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - } - if (cinfo->quantize_colors) { - if (cinfo->raw_data_out) - ERREXIT(cinfo, JERR_NOTIMPL); - /* 2-pass quantizer only works in 3-component color space. */ - if (cinfo->out_color_components != 3) { - cinfo->enable_1pass_quant = TRUE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - cinfo->colormap = NULL; - } else if (cinfo->colormap != NULL) { - cinfo->enable_external_quant = TRUE; - } else if (cinfo->two_pass_quantize) { - cinfo->enable_2pass_quant = TRUE; - } else { - cinfo->enable_1pass_quant = TRUE; - } - - if (cinfo->enable_1pass_quant) { -#ifdef QUANT_1PASS_SUPPORTED - jinit_1pass_quantizer(cinfo); - master->quantizer_1pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - - /* We use the 2-pass code to map to external colormaps. */ - if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { -#ifdef QUANT_2PASS_SUPPORTED - jinit_2pass_quantizer(cinfo); - master->quantizer_2pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - /* If both quantizers are initialized, the 2-pass one is left active; - * this is necessary for starting with quantization to an external map. - */ - } - - /* Post-processing: in particular, color conversion first */ - if (! cinfo->raw_data_out) { - if (master->using_merged_upsample) { -#ifdef UPSAMPLE_MERGING_SUPPORTED - jinit_merged_upsampler(cinfo); /* does color conversion too */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - jinit_color_deconverter(cinfo); - jinit_upsampler(cinfo); - } - jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); - } - /* Inverse DCT */ - jinit_inverse_dct(cinfo); - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); - } - - /* Initialize principal buffer controllers. */ - use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; - jinit_d_coef_controller(cinfo, use_c_buffer); - - if (! cinfo->raw_data_out) - jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* If jpeg_start_decompress will read the whole file, initialize - * progress monitoring appropriately. The input step is counted - * as one pass. - */ - if (cinfo->progress != NULL && ! cinfo->buffered_image && - cinfo->inputctl->has_multiple_scans) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); - /* Count the input pass as done */ - master->pass_number++; - } -#endif /* D_MULTISCAN_FILES_SUPPORTED */ -} - - -/* - * Per-pass setup. - * This is called at the beginning of each output pass. We determine which - * modules will be active during this pass and give them appropriate - * start_pass calls. We also set is_dummy_pass to indicate whether this - * is a "real" output pass or a dummy pass for color quantization. - * (In the latter case, jdapi.c will crank the pass to completion.) - */ - -METHODDEF void -prepare_for_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (master->pub.is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Final pass of 2-pass quantization */ - master->pub.is_dummy_pass = FALSE; - (*cinfo->cquantize->start_pass) (cinfo, FALSE); - (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); - (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - if (cinfo->quantize_colors && cinfo->colormap == NULL) { - /* Select new quantization method */ - if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { - cinfo->cquantize = master->quantizer_2pass; - master->pub.is_dummy_pass = TRUE; - } else if (cinfo->enable_1pass_quant) { - cinfo->cquantize = master->quantizer_1pass; - } else { - ERREXIT(cinfo, JERR_MODE_CHANGE); - } - } - (*cinfo->idct->start_pass) (cinfo); - (*cinfo->coef->start_output_pass) (cinfo); - if (! cinfo->raw_data_out) { - if (! master->using_merged_upsample) - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->upsample->start_pass) (cinfo); - if (cinfo->quantize_colors) - (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); - (*cinfo->post->start_pass) (cinfo, - (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - } - } - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->pass_number + - (master->pub.is_dummy_pass ? 2 : 1); - /* In buffered-image mode, we assume one more output pass if EOI not - * yet reached, but no more passes if EOI has been reached. - */ - if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { - cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); - } - } -} - - -/* - * Finish up at end of an output pass. - */ - -METHODDEF void -finish_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (cinfo->quantize_colors) - (*cinfo->cquantize->finish_pass) (cinfo); - master->pass_number++; -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Switch to a new external colormap between output passes. - */ - -GLOBAL void -jpeg_new_colormap (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_BUFIMAGE) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (cinfo->quantize_colors && cinfo->enable_external_quant && - cinfo->colormap != NULL) { - /* Select 2-pass quantizer for external colormap use */ - cinfo->cquantize = master->quantizer_2pass; - /* Notify quantizer of colormap change */ - (*cinfo->cquantize->new_color_map) (cinfo); - master->pub.is_dummy_pass = FALSE; /* just in case */ - } else - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -/* - * Initialize master decompression control and select active modules. - * This is performed at the start of jpeg_start_decompress. - */ - -GLOBAL void -jinit_master_decompress (j_decompress_ptr cinfo) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_decomp_master)); - cinfo->master = (struct jpeg_decomp_master *) master; - master->pub.prepare_for_output_pass = prepare_for_output_pass; - master->pub.finish_output_pass = finish_output_pass; - - master->pub.is_dummy_pass = FALSE; - - master_selection(cinfo); -} +/* + * jdmaster.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG decompressor. + * These routines are concerned with selecting the modules to be executed + * and with determining the number of passes and the work to be done in each + * pass. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_decomp_master pub; /* public fields */ + + int pass_number; /* # of passes completed */ + + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + + /* Saved references to initialized quantizer modules, + * in case we need to switch modes. + */ + struct jpeg_color_quantizer * quantizer_1pass; + struct jpeg_color_quantizer * quantizer_2pass; +} my_decomp_master; + +typedef my_decomp_master * my_master_ptr; + + +/* + * Determine whether merged upsample/color conversion should be used. + * CRUCIAL: this must match the actual capabilities of jdmerge.c! + */ + +LOCAL boolean +use_merged_upsample (j_decompress_ptr cinfo) +{ +#ifdef UPSAMPLE_MERGING_SUPPORTED + /* Merging is the equivalent of plain box-filter upsampling */ + if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) + return FALSE; + /* jdmerge.c only supports YCC=>RGB color conversion */ + if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || + cinfo->out_color_space != JCS_RGB || + cinfo->out_color_components != RGB_PIXELSIZE) + return FALSE; + /* and it only handles 2h1v or 2h2v sampling ratios */ + if (cinfo->comp_info[0].h_samp_factor != 2 || + cinfo->comp_info[1].h_samp_factor != 1 || + cinfo->comp_info[2].h_samp_factor != 1 || + cinfo->comp_info[0].v_samp_factor > 2 || + cinfo->comp_info[1].v_samp_factor != 1 || + cinfo->comp_info[2].v_samp_factor != 1) + return FALSE; + /* furthermore, it doesn't work if we've scaled the IDCTs differently */ + if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || + cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || + cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) + return FALSE; + /* ??? also need to test for upsample-time rescaling, when & if supported */ + return TRUE; /* by golly, it'll work... */ +#else + return FALSE; +#endif +} + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + * Also note that it may be called before the master module is initialized! + */ + +GLOBAL void +jpeg_calc_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ +#if 0 // JDC: commented out to remove warning + int ci; + jpeg_component_info *compptr; +#endif + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_READY) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + +#ifdef IDCT_SCALING_SUPPORTED + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * 8 <= cinfo->scale_denom) { + /* Provide 1/8 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 8L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 8L); + cinfo->min_DCT_scaled_size = 1; + } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { + /* Provide 1/4 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 4L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 4L); + cinfo->min_DCT_scaled_size = 2; + } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { + /* Provide 1/2 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 2L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 2L); + cinfo->min_DCT_scaled_size = 4; + } else { + /* Provide 1/1 scaling */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + cinfo->min_DCT_scaled_size = DCTSIZE; + } + /* In selecting the actual DCT scaling for each component, we try to + * scale up the chroma components via IDCT scaling rather than upsampling. + * This saves time if the upsampler gets to use 1:1 scaling. + * Note this code assumes that the supported DCT scalings are powers of 2. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + int ssize = cinfo->min_DCT_scaled_size; + while (ssize < DCTSIZE && + (compptr->h_samp_factor * ssize * 2 <= + cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && + (compptr->v_samp_factor * ssize * 2 <= + cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { + ssize = ssize * 2; + } + compptr->DCT_scaled_size = ssize; + } + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Size in samples, after IDCT scaling */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * + (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * + (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ + + /* Report number of components in selected colorspace. */ + /* Probably this should be in the color conversion module... */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + break; + case JCS_RGB: +#if RGB_PIXELSIZE != 3 + cinfo->out_color_components = RGB_PIXELSIZE; + break; +#endif /* else share code with YCbCr */ + case JCS_YCbCr: + cinfo->out_color_components = 3; + break; + case JCS_CMYK: + case JCS_YCCK: + cinfo->out_color_components = 4; + break; + default: /* else must be same colorspace as in file */ + cinfo->out_color_components = cinfo->num_components; + break; + } + cinfo->output_components = (cinfo->quantize_colors ? 1 : + cinfo->out_color_components); + + /* See if upsampler will want to emit more than one row at a time */ + if (use_merged_upsample(cinfo)) + cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; + else + cinfo->rec_outbuf_height = 1; +} + + +/* + * Several decompression processes need to range-limit values to the range + * 0..MAXJSAMPLE; the input value may fall somewhat outside this range + * due to noise introduced by quantization, roundoff error, etc. These + * processes are inner loops and need to be as fast as possible. On most + * machines, particularly CPUs with pipelines or instruction prefetch, + * a (subscript-check-less) C table lookup + * x = sample_range_limit[x]; + * is faster than explicit tests + * if (x < 0) x = 0; + * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; + * These processes all use a common table prepared by the routine below. + * + * For most steps we can mathematically guarantee that the initial value + * of x is within MAXJSAMPLE+1 of the legal range, so a table running from + * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial + * limiting step (just after the IDCT), a wildly out-of-range value is + * possible if the input data is corrupt. To avoid any chance of indexing + * off the end of memory and getting a bad-pointer trap, we perform the + * post-IDCT limiting thus: + * x = range_limit[x & MASK]; + * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit + * samples. Under normal circumstances this is more than enough range and + * a correct output will be generated; with bogus input data the mask will + * cause wraparound, and we will safely generate a bogus-but-in-range output. + * For the post-IDCT step, we want to convert the data from signed to unsigned + * representation by adding CENTERJSAMPLE at the same time that we limit it. + * So the post-IDCT limiting table ends up looking like this: + * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, + * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0,1,...,CENTERJSAMPLE-1 + * Negative inputs select values from the upper half of the table after + * masking. + * + * We can save some space by overlapping the start of the post-IDCT table + * with the simpler range limiting table. The post-IDCT table begins at + * sample_range_limit + CENTERJSAMPLE. + * + * Note that the table is allocated in near data space on PCs; it's small + * enough and used often enough to justify this. + */ + +LOCAL void +prepare_range_limit_table (j_decompress_ptr cinfo) +/* Allocate and fill in the sample_range_limit table */ +{ + JSAMPLE * table; + int i; + + table = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ + cinfo->sample_range_limit = table; + /* First segment of "simple" table: limit[x] = 0 for x < 0 */ + MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + /* Main part of "simple" table: limit[x] = x */ + for (i = 0; i <= MAXJSAMPLE; i++) + table[i] = (JSAMPLE) i; + table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ + /* End of simple table, rest of first half of post-IDCT table */ + for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) + table[i] = MAXJSAMPLE; + /* Second half of post-IDCT table */ + MEMZERO(table + (2 * (MAXJSAMPLE+1)), + (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), + cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); +} + + +/* + * Master selection of decompression modules. + * This is done once at jpeg_start_decompress time. We determine + * which modules will be used and give them appropriate initialization calls. + * We also initialize the decompressor input side to begin consuming data. + * + * Since jpeg_read_header has finished, we know what is in the SOF + * and (first) SOS markers. We also have all the application parameter + * settings. + */ + +LOCAL void +master_selection (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + boolean use_c_buffer; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Initialize dimensions and other stuff */ + jpeg_calc_output_dimensions(cinfo); + prepare_range_limit_table(cinfo); + + /* Width of an output scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize my private state */ + master->pass_number = 0; + master->using_merged_upsample = use_merged_upsample(cinfo); + + /* Color quantizer selection */ + master->quantizer_1pass = NULL; + master->quantizer_2pass = NULL; + /* No mode changes if not using buffered-image mode. */ + if (! cinfo->quantize_colors || ! cinfo->buffered_image) { + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + } + if (cinfo->quantize_colors) { + if (cinfo->raw_data_out) + ERREXIT(cinfo, JERR_NOTIMPL); + /* 2-pass quantizer only works in 3-component color space. */ + if (cinfo->out_color_components != 3) { + cinfo->enable_1pass_quant = TRUE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + cinfo->colormap = NULL; + } else if (cinfo->colormap != NULL) { + cinfo->enable_external_quant = TRUE; + } else if (cinfo->two_pass_quantize) { + cinfo->enable_2pass_quant = TRUE; + } else { + cinfo->enable_1pass_quant = TRUE; + } + + if (cinfo->enable_1pass_quant) { +#ifdef QUANT_1PASS_SUPPORTED + jinit_1pass_quantizer(cinfo); + master->quantizer_1pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + /* We use the 2-pass code to map to external colormaps. */ + if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { +#ifdef QUANT_2PASS_SUPPORTED + jinit_2pass_quantizer(cinfo); + master->quantizer_2pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + /* If both quantizers are initialized, the 2-pass one is left active; + * this is necessary for starting with quantization to an external map. + */ + } + + /* Post-processing: in particular, color conversion first */ + if (! cinfo->raw_data_out) { + if (master->using_merged_upsample) { +#ifdef UPSAMPLE_MERGING_SUPPORTED + jinit_merged_upsampler(cinfo); /* does color conversion too */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + jinit_color_deconverter(cinfo); + jinit_upsampler(cinfo); + } + jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); + } + /* Inverse DCT */ + jinit_inverse_dct(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef D_PROGRESSIVE_SUPPORTED + jinit_phuff_decoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_decoder(cinfo); + } + + /* Initialize principal buffer controllers. */ + use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; + jinit_d_coef_controller(cinfo, use_c_buffer); + + if (! cinfo->raw_data_out) + jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* If jpeg_start_decompress will read the whole file, initialize + * progress monitoring appropriately. The input step is counted + * as one pass. + */ + if (cinfo->progress != NULL && ! cinfo->buffered_image && + cinfo->inputctl->has_multiple_scans) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); + /* Count the input pass as done */ + master->pass_number++; + } +#endif /* D_MULTISCAN_FILES_SUPPORTED */ +} + + +/* + * Per-pass setup. + * This is called at the beginning of each output pass. We determine which + * modules will be active during this pass and give them appropriate + * start_pass calls. We also set is_dummy_pass to indicate whether this + * is a "real" output pass or a dummy pass for color quantization. + * (In the latter case, jdapi.c will crank the pass to completion.) + */ + +METHODDEF void +prepare_for_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (master->pub.is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Final pass of 2-pass quantization */ + master->pub.is_dummy_pass = FALSE; + (*cinfo->cquantize->start_pass) (cinfo, FALSE); + (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); + (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + if (cinfo->quantize_colors && cinfo->colormap == NULL) { + /* Select new quantization method */ + if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { + cinfo->cquantize = master->quantizer_2pass; + master->pub.is_dummy_pass = TRUE; + } else if (cinfo->enable_1pass_quant) { + cinfo->cquantize = master->quantizer_1pass; + } else { + ERREXIT(cinfo, JERR_MODE_CHANGE); + } + } + (*cinfo->idct->start_pass) (cinfo); + (*cinfo->coef->start_output_pass) (cinfo); + if (! cinfo->raw_data_out) { + if (! master->using_merged_upsample) + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->upsample->start_pass) (cinfo); + if (cinfo->quantize_colors) + (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); + (*cinfo->post->start_pass) (cinfo, + (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + } + } + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->pass_number + + (master->pub.is_dummy_pass ? 2 : 1); + /* In buffered-image mode, we assume one more output pass if EOI not + * yet reached, but no more passes if EOI has been reached. + */ + if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { + cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); + } + } +} + + +/* + * Finish up at end of an output pass. + */ + +METHODDEF void +finish_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (cinfo->quantize_colors) + (*cinfo->cquantize->finish_pass) (cinfo); + master->pass_number++; +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Switch to a new external colormap between output passes. + */ + +GLOBAL void +jpeg_new_colormap (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_BUFIMAGE) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (cinfo->quantize_colors && cinfo->enable_external_quant && + cinfo->colormap != NULL) { + /* Select 2-pass quantizer for external colormap use */ + cinfo->cquantize = master->quantizer_2pass; + /* Notify quantizer of colormap change */ + (*cinfo->cquantize->new_color_map) (cinfo); + master->pub.is_dummy_pass = FALSE; /* just in case */ + } else + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +/* + * Initialize master decompression control and select active modules. + * This is performed at the start of jpeg_start_decompress. + */ + +GLOBAL void +jinit_master_decompress (j_decompress_ptr cinfo) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_decomp_master)); + cinfo->master = (struct jpeg_decomp_master *) master; + master->pub.prepare_for_output_pass = prepare_for_output_pass; + master->pub.finish_output_pass = finish_output_pass; + + master->pub.is_dummy_pass = FALSE; + + master_selection(cinfo); +} diff --git a/libs/jpeg6/jdpostct.cpp b/libs/jpeg6/jdpostct.cpp index e3283b0..f612002 100755 --- a/libs/jpeg6/jdpostct.cpp +++ b/libs/jpeg6/jdpostct.cpp @@ -1,290 +1,290 @@ -/* - * jdpostct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the decompression postprocessing controller. - * This controller manages the upsampling, color conversion, and color - * quantization/reduction steps; specifically, it controls the buffering - * between upsample/color conversion and color quantization/reduction. - * - * If no color quantization/reduction is required, then this module has no - * work to do, and it just hands off to the upsample/color conversion code. - * An integrated upsample/convert/quantize process would replace this module - * entirely. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_post_controller pub; /* public fields */ - - /* Color quantization source buffer: this holds output data from - * the upsample/color conversion step to be passed to the quantizer. - * For two-pass color quantization, we need a full-image buffer; - * for one-pass operation, a strip buffer is sufficient. - */ - jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ - JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ - JDIMENSION strip_height; /* buffer size in rows */ - /* for two-pass mode only: */ - JDIMENSION starting_row; /* row # of first row in current strip */ - JDIMENSION next_row; /* index of next row to fill/empty in strip */ -} my_post_controller; - -typedef my_post_controller * my_post_ptr; - - -/* Forward declarations */ -METHODDEF void post_process_1pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF void post_process_prepass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -METHODDEF void post_process_2pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->quantize_colors) { - /* Single-pass processing with color quantization. */ - post->pub.post_process_data = post_process_1pass; - /* We could be doing buffered-image output before starting a 2-pass - * color quantization; in that case, jinit_d_post_controller did not - * allocate a strip buffer. Use the virtual-array buffer as workspace. - */ - if (post->buffer == NULL) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - (JDIMENSION) 0, post->strip_height, TRUE); - } - } else { - /* For single-pass processing without color quantization, - * I have no work to do; just call the upsampler directly. - */ - post->pub.post_process_data = cinfo->upsample->upsample; - } - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_SAVE_AND_PASS: - /* First pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_prepass; - break; - case JBUF_CRANK_DEST: - /* Second pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_2pass; - break; -#endif /* QUANT_2PASS_SUPPORTED */ - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } - post->starting_row = post->next_row = 0; -} - - -/* - * Process some data in the one-pass (strip buffer) case. - * This is used for color precision reduction as well as one-pass quantization. - */ - -METHODDEF void -post_process_1pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Fill the buffer, but not more than what we can dump out in one go. */ - /* Note we rely on the upsampler to detect bottom of image. */ - max_rows = out_rows_avail - *out_row_ctr; - if (max_rows > post->strip_height) - max_rows = post->strip_height; - num_rows = 0; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &num_rows, max_rows); - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer, output_buf + *out_row_ctr, (int) num_rows); - *out_row_ctr += num_rows; -} - - -#ifdef QUANT_2PASS_SUPPORTED - -/* - * Process some data in the first pass of 2-pass quantization. - */ - -METHODDEF void -post_process_prepass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION old_next_row, num_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, TRUE); - } - - /* Upsample some data (up to a strip height's worth). */ - old_next_row = post->next_row; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &post->next_row, post->strip_height); - - /* Allow quantizer to scan new data. No data is emitted, */ - /* but we advance out_row_ctr so outer loop can tell when we're done. */ - if (post->next_row > old_next_row) { - num_rows = post->next_row - old_next_row; - (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, - (JSAMPARRAY) NULL, (int) num_rows); - *out_row_ctr += num_rows; - } - - /* Advance if we filled the strip. */ - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - - -/* - * Process some data in the second pass of 2-pass quantization. - */ - -METHODDEF void -post_process_2pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, FALSE); - } - - /* Determine number of rows to emit. */ - num_rows = post->strip_height - post->next_row; /* available in strip */ - max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ - if (num_rows > max_rows) - num_rows = max_rows; - /* We have to check bottom of image here, can't depend on upsampler. */ - max_rows = cinfo->output_height - post->starting_row; - if (num_rows > max_rows) - num_rows = max_rows; - - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer + post->next_row, output_buf + *out_row_ctr, - (int) num_rows); - *out_row_ctr += num_rows; - - /* Advance if we filled the strip. */ - post->next_row += num_rows; - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize postprocessing controller. - */ - -GLOBAL void -jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_post_ptr post; - - post = (my_post_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_post_controller)); - cinfo->post = (struct jpeg_d_post_controller *) post; - post->pub.start_pass = start_pass_dpost; - post->whole_image = NULL; /* flag for no virtual arrays */ - post->buffer = NULL; /* flag for no strip buffer */ - - /* Create the quantization buffer, if needed */ - if (cinfo->quantize_colors) { - /* The buffer strip height is max_v_samp_factor, which is typically - * an efficient number of rows for upsampling to return. - * (In the presence of output rescaling, we might want to be smarter?) - */ - post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; - if (need_full_buffer) { - /* Two-pass color quantization: need full-image storage. */ - /* We round up the number of rows to a multiple of the strip height. */ -#ifdef QUANT_2PASS_SUPPORTED - post->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - cinfo->output_width * cinfo->out_color_components, - (JDIMENSION) jround_up((long) cinfo->output_height, - (long) post->strip_height), - post->strip_height); -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - /* One-pass color quantization: just make a strip buffer. */ - post->buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width * cinfo->out_color_components, - post->strip_height); - } - } -} +/* + * jdpostct.c + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the decompression postprocessing controller. + * This controller manages the upsampling, color conversion, and color + * quantization/reduction steps; specifically, it controls the buffering + * between upsample/color conversion and color quantization/reduction. + * + * If no color quantization/reduction is required, then this module has no + * work to do, and it just hands off to the upsample/color conversion code. + * An integrated upsample/convert/quantize process would replace this module + * entirely. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_post_controller pub; /* public fields */ + + /* Color quantization source buffer: this holds output data from + * the upsample/color conversion step to be passed to the quantizer. + * For two-pass color quantization, we need a full-image buffer; + * for one-pass operation, a strip buffer is sufficient. + */ + jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ + JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ + JDIMENSION strip_height; /* buffer size in rows */ + /* for two-pass mode only: */ + JDIMENSION starting_row; /* row # of first row in current strip */ + JDIMENSION next_row; /* index of next row to fill/empty in strip */ +} my_post_controller; + +typedef my_post_controller * my_post_ptr; + + +/* Forward declarations */ +METHODDEF void post_process_1pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF void post_process_prepass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +METHODDEF void post_process_2pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF void +start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->quantize_colors) { + /* Single-pass processing with color quantization. */ + post->pub.post_process_data = post_process_1pass; + /* We could be doing buffered-image output before starting a 2-pass + * color quantization; in that case, jinit_d_post_controller did not + * allocate a strip buffer. Use the virtual-array buffer as workspace. + */ + if (post->buffer == NULL) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + (JDIMENSION) 0, post->strip_height, TRUE); + } + } else { + /* For single-pass processing without color quantization, + * I have no work to do; just call the upsampler directly. + */ + post->pub.post_process_data = cinfo->upsample->upsample; + } + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_SAVE_AND_PASS: + /* First pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_prepass; + break; + case JBUF_CRANK_DEST: + /* Second pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_2pass; + break; +#endif /* QUANT_2PASS_SUPPORTED */ + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } + post->starting_row = post->next_row = 0; +} + + +/* + * Process some data in the one-pass (strip buffer) case. + * This is used for color precision reduction as well as one-pass quantization. + */ + +METHODDEF void +post_process_1pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Fill the buffer, but not more than what we can dump out in one go. */ + /* Note we rely on the upsampler to detect bottom of image. */ + max_rows = out_rows_avail - *out_row_ctr; + if (max_rows > post->strip_height) + max_rows = post->strip_height; + num_rows = 0; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &num_rows, max_rows); + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer, output_buf + *out_row_ctr, (int) num_rows); + *out_row_ctr += num_rows; +} + + +#ifdef QUANT_2PASS_SUPPORTED + +/* + * Process some data in the first pass of 2-pass quantization. + */ + +METHODDEF void +post_process_prepass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION old_next_row, num_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, TRUE); + } + + /* Upsample some data (up to a strip height's worth). */ + old_next_row = post->next_row; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &post->next_row, post->strip_height); + + /* Allow quantizer to scan new data. No data is emitted, */ + /* but we advance out_row_ctr so outer loop can tell when we're done. */ + if (post->next_row > old_next_row) { + num_rows = post->next_row - old_next_row; + (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, + (JSAMPARRAY) NULL, (int) num_rows); + *out_row_ctr += num_rows; + } + + /* Advance if we filled the strip. */ + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + + +/* + * Process some data in the second pass of 2-pass quantization. + */ + +METHODDEF void +post_process_2pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, FALSE); + } + + /* Determine number of rows to emit. */ + num_rows = post->strip_height - post->next_row; /* available in strip */ + max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ + if (num_rows > max_rows) + num_rows = max_rows; + /* We have to check bottom of image here, can't depend on upsampler. */ + max_rows = cinfo->output_height - post->starting_row; + if (num_rows > max_rows) + num_rows = max_rows; + + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer + post->next_row, output_buf + *out_row_ctr, + (int) num_rows); + *out_row_ctr += num_rows; + + /* Advance if we filled the strip. */ + post->next_row += num_rows; + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize postprocessing controller. + */ + +GLOBAL void +jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_post_ptr post; + + post = (my_post_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_post_controller)); + cinfo->post = (struct jpeg_d_post_controller *) post; + post->pub.start_pass = start_pass_dpost; + post->whole_image = NULL; /* flag for no virtual arrays */ + post->buffer = NULL; /* flag for no strip buffer */ + + /* Create the quantization buffer, if needed */ + if (cinfo->quantize_colors) { + /* The buffer strip height is max_v_samp_factor, which is typically + * an efficient number of rows for upsampling to return. + * (In the presence of output rescaling, we might want to be smarter?) + */ + post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; + if (need_full_buffer) { + /* Two-pass color quantization: need full-image storage. */ + /* We round up the number of rows to a multiple of the strip height. */ +#ifdef QUANT_2PASS_SUPPORTED + post->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + cinfo->output_width * cinfo->out_color_components, + (JDIMENSION) jround_up((long) cinfo->output_height, + (long) post->strip_height), + post->strip_height); +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + /* One-pass color quantization: just make a strip buffer. */ + post->buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->out_color_components, + post->strip_height); + } + } +} diff --git a/libs/jpeg6/jdsample.cpp b/libs/jpeg6/jdsample.cpp index bc171f4..661e198 100755 --- a/libs/jpeg6/jdsample.cpp +++ b/libs/jpeg6/jdsample.cpp @@ -1,478 +1,478 @@ -/* - * jdsample.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains upsampling routines. - * - * Upsampling input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. Upsampling will normally produce - * max_v_samp_factor pixel rows from each row group (but this could vary - * if the upsampler is applying a scale factor of its own). - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to upsample a single component */ -typedef JMETHOD(void, upsample1_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Color conversion buffer. When using separate upsampling and color - * conversion steps, this buffer holds one upsampled row group until it - * has been color converted and output. - * Note: we do not allocate any storage for component(s) which are full-size, - * ie do not need rescaling. The corresponding entry of color_buf[] is - * simply set to point to the input data array, thereby avoiding copying. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - /* Per-component upsampling method pointers */ - upsample1_ptr methods[MAX_COMPONENTS]; - - int next_row_out; /* counts rows emitted from color_buf */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ - - /* Height of an input row group for each component. */ - int rowgroup_height[MAX_COMPONENTS]; - - /* These arrays save pixel expansion factors so that int_expand need not - * recompute them each time. They are unused for other upsampling methods. - */ - UINT8 h_expand[MAX_COMPONENTS]; - UINT8 v_expand[MAX_COMPONENTS]; -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF void -start_pass_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the conversion buffer empty */ - upsample->next_row_out = cinfo->max_v_samp_factor; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * In this version we upsample each component independently. - * We upsample one row group into the conversion buffer, then apply - * color conversion a row at a time. - */ - -METHODDEF void -sep_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int ci; - jpeg_component_info * compptr; - JDIMENSION num_rows; - - /* Fill the conversion buffer, if it's empty */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Invoke per-component upsample method. Notice we pass a POINTER - * to color_buf[ci], so that fullsize_upsample can change it. - */ - (*upsample->methods[ci]) (cinfo, compptr, - input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), - upsample->color_buf + ci); - } - upsample->next_row_out = 0; - } - - /* Color-convert and emit rows */ - - /* How many we have in the buffer: */ - num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); - /* Not more than the distance to the end of the image. Need this test - * in case the image height is not a multiple of max_v_samp_factor: - */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - - (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, - (JDIMENSION) upsample->next_row_out, - output_buf + *out_row_ctr, - (int) num_rows); - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - upsample->next_row_out += num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by sep_upsample to upsample pixel values - * of a single component. One row group is processed per call. - */ - - -/* - * For full-size components, we just make color_buf[ci] point at the - * input buffer, and thus avoid copying any data. Note that this is - * safe only because sep_upsample doesn't declare the input row group - * "consumed" until we are done color converting and emitting it. - */ - -METHODDEF void -fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = input_data; -} - - -/* - * This is a no-op version used for "uninteresting" components. - * These components will not be referenced by color conversion. - */ - -METHODDEF void -noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = NULL; /* safety check */ -} - - -/* - * This version handles any integral sampling ratios. - * This is not used for typical JPEG files, so it need not be fast. - * Nor, for that matter, is it particularly accurate: the algorithm is - * simple replication of the input pixel onto the corresponding output - * pixels. The hi-falutin sampling literature refers to this as a - * "box filter". A box filter tends to introduce visible artifacts, - * so if you are actually going to use 3:1 or 4:1 sampling ratios - * you would be well advised to improve this code. - */ - -METHODDEF void -int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - register int h; - JSAMPROW outend; - int h_expand, v_expand; - int inrow, outrow; - - h_expand = upsample->h_expand[compptr->component_index]; - v_expand = upsample->v_expand[compptr->component_index]; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - /* Generate one output row with proper horizontal expansion */ - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - for (h = h_expand; h > 0; h--) { - *outptr++ = invalue; - } - } - /* Generate any additional output rows by duplicating the first one */ - if (v_expand > 1) { - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - v_expand-1, cinfo->output_width); - } - inrow++; - outrow += v_expand; - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. - * It's still a box filter. - */ - -METHODDEF void -h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. - * It's still a box filter. - */ - -METHODDEF void -h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow, outrow; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - 1, cinfo->output_width); - inrow++; - outrow += 2; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical. - * - * The upsampling algorithm is linear interpolation between pixel centers, - * also known as a "triangle filter". This is a good compromise between - * speed and visual quality. The centers of the output pixels are 1/4 and 3/4 - * of the way between input pixel centers. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF void -h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register int invalue; - register JDIMENSION colctr; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - /* Special case for first column */ - invalue = GETJSAMPLE(*inptr++); - *outptr++ = (JSAMPLE) invalue; - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2); - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel */ - invalue = GETJSAMPLE(*inptr++) * 3; - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2); - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2); - } - - /* Special case for last column */ - invalue = GETJSAMPLE(*inptr); - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2); - *outptr++ = (JSAMPLE) invalue; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical. - * Again a triangle filter; see comments for h2v1 case, above. - * - * It is OK for us to reference the adjacent input rows because we demanded - * context from the main buffer controller (see initialization code). - */ - -METHODDEF void -h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr0, inptr1, outptr; -#if BITS_IN_JSAMPLE == 8 - register int thiscolsum, lastcolsum, nextcolsum; -#else - register INT32 thiscolsum, lastcolsum, nextcolsum; -#endif - register JDIMENSION colctr; - int inrow, outrow, v; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - for (v = 0; v < 2; v++) { - /* inptr0 points to nearest input row, inptr1 points to next nearest */ - inptr0 = input_data[inrow]; - if (v == 0) /* next nearest is row above */ - inptr1 = input_data[inrow-1]; - else /* next nearest is row below */ - inptr1 = input_data[inrow+1]; - outptr = output_data[outrow++]; - - /* Special case for first column */ - thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */ - /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */ - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - } - - /* Special case for last column */ - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4); - } - inrow++; - } -} - - -/* - * Module initialization routine for upsampling. - */ - -GLOBAL void -jinit_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - int ci; - jpeg_component_info * compptr; - boolean need_buffer, do_fancy; - int h_in_group, v_in_group, h_out_group, v_out_group; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_upsample; - upsample->pub.upsample = sep_upsample; - upsample->pub.need_context_rows = FALSE; /* until we find out differently */ - - if (cinfo->CCIR601_sampling) /* this isn't supported */ - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1, - * so don't ask for it. - */ - do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1; - - /* Verify we can handle the sampling factors, select per-component methods, - * and create storage as needed. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Compute size of an "input group" after IDCT scaling. This many samples - * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. - */ - h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - h_out_group = cinfo->max_h_samp_factor; - v_out_group = cinfo->max_v_samp_factor; - upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ - need_buffer = TRUE; - if (! compptr->component_needed) { - /* Don't bother to upsample an uninteresting component. */ - upsample->methods[ci] = noop_upsample; - need_buffer = FALSE; - } else if (h_in_group == h_out_group && v_in_group == v_out_group) { - /* Fullsize components can be processed without any work. */ - upsample->methods[ci] = fullsize_upsample; - need_buffer = FALSE; - } else if (h_in_group * 2 == h_out_group && - v_in_group == v_out_group) { - /* Special cases for 2h1v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) - upsample->methods[ci] = h2v1_fancy_upsample; - else - upsample->methods[ci] = h2v1_upsample; - } else if (h_in_group * 2 == h_out_group && - v_in_group * 2 == v_out_group) { - /* Special cases for 2h2v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) { - upsample->methods[ci] = h2v2_fancy_upsample; - upsample->pub.need_context_rows = TRUE; - } else - upsample->methods[ci] = h2v2_upsample; - } else if ((h_out_group % h_in_group) == 0 && - (v_out_group % v_in_group) == 0) { - /* Generic integral-factors upsampling method */ - upsample->methods[ci] = int_upsample; - upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); - upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - if (need_buffer) { - upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) jround_up((long) cinfo->output_width, - (long) cinfo->max_h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} +/* + * jdsample.c + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains upsampling routines. + * + * Upsampling input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. Upsampling will normally produce + * max_v_samp_factor pixel rows from each row group (but this could vary + * if the upsampler is applying a scale factor of its own). + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to upsample a single component */ +typedef JMETHOD(void, upsample1_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Color conversion buffer. When using separate upsampling and color + * conversion steps, this buffer holds one upsampled row group until it + * has been color converted and output. + * Note: we do not allocate any storage for component(s) which are full-size, + * ie do not need rescaling. The corresponding entry of color_buf[] is + * simply set to point to the input data array, thereby avoiding copying. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + /* Per-component upsampling method pointers */ + upsample1_ptr methods[MAX_COMPONENTS]; + + int next_row_out; /* counts rows emitted from color_buf */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ + + /* Height of an input row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_expand need not + * recompute them each time. They are unused for other upsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF void +start_pass_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the conversion buffer empty */ + upsample->next_row_out = cinfo->max_v_samp_factor; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * In this version we upsample each component independently. + * We upsample one row group into the conversion buffer, then apply + * color conversion a row at a time. + */ + +METHODDEF void +sep_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int ci; + jpeg_component_info * compptr; + JDIMENSION num_rows; + + /* Fill the conversion buffer, if it's empty */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Invoke per-component upsample method. Notice we pass a POINTER + * to color_buf[ci], so that fullsize_upsample can change it. + */ + (*upsample->methods[ci]) (cinfo, compptr, + input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), + upsample->color_buf + ci); + } + upsample->next_row_out = 0; + } + + /* Color-convert and emit rows */ + + /* How many we have in the buffer: */ + num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); + /* Not more than the distance to the end of the image. Need this test + * in case the image height is not a multiple of max_v_samp_factor: + */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + + (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, + (JDIMENSION) upsample->next_row_out, + output_buf + *out_row_ctr, + (int) num_rows); + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + upsample->next_row_out += num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by sep_upsample to upsample pixel values + * of a single component. One row group is processed per call. + */ + + +/* + * For full-size components, we just make color_buf[ci] point at the + * input buffer, and thus avoid copying any data. Note that this is + * safe only because sep_upsample doesn't declare the input row group + * "consumed" until we are done color converting and emitting it. + */ + +METHODDEF void +fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = input_data; +} + + +/* + * This is a no-op version used for "uninteresting" components. + * These components will not be referenced by color conversion. + */ + +METHODDEF void +noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = NULL; /* safety check */ +} + + +/* + * This version handles any integral sampling ratios. + * This is not used for typical JPEG files, so it need not be fast. + * Nor, for that matter, is it particularly accurate: the algorithm is + * simple replication of the input pixel onto the corresponding output + * pixels. The hi-falutin sampling literature refers to this as a + * "box filter". A box filter tends to introduce visible artifacts, + * so if you are actually going to use 3:1 or 4:1 sampling ratios + * you would be well advised to improve this code. + */ + +METHODDEF void +int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + register int h; + JSAMPROW outend; + int h_expand, v_expand; + int inrow, outrow; + + h_expand = upsample->h_expand[compptr->component_index]; + v_expand = upsample->v_expand[compptr->component_index]; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + /* Generate one output row with proper horizontal expansion */ + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + for (h = h_expand; h > 0; h--) { + *outptr++ = invalue; + } + } + /* Generate any additional output rows by duplicating the first one */ + if (v_expand > 1) { + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + v_expand-1, cinfo->output_width); + } + inrow++; + outrow += v_expand; + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. + * It's still a box filter. + */ + +METHODDEF void +h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow; + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + inptr = input_data[inrow]; + outptr = output_data[inrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. + * It's still a box filter. + */ + +METHODDEF void +h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow, outrow; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + 1, cinfo->output_width); + inrow++; + outrow += 2; + } +} + + +/* + * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical. + * + * The upsampling algorithm is linear interpolation between pixel centers, + * also known as a "triangle filter". This is a good compromise between + * speed and visual quality. The centers of the output pixels are 1/4 and 3/4 + * of the way between input pixel centers. + * + * A note about the "bias" calculations: when rounding fractional values to + * integer, we do not want to always round 0.5 up to the next integer. + * If we did that, we'd introduce a noticeable bias towards larger values. + * Instead, this code is arranged so that 0.5 will be rounded up or down at + * alternate pixel locations (a simple ordered dither pattern). + */ + +METHODDEF void +h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register int invalue; + register JDIMENSION colctr; + int inrow; + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + inptr = input_data[inrow]; + outptr = output_data[inrow]; + /* Special case for first column */ + invalue = GETJSAMPLE(*inptr++); + *outptr++ = (JSAMPLE) invalue; + *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2); + + for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { + /* General case: 3/4 * nearer pixel + 1/4 * further pixel */ + invalue = GETJSAMPLE(*inptr++) * 3; + *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2); + *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2); + } + + /* Special case for last column */ + invalue = GETJSAMPLE(*inptr); + *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2); + *outptr++ = (JSAMPLE) invalue; + } +} + + +/* + * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical. + * Again a triangle filter; see comments for h2v1 case, above. + * + * It is OK for us to reference the adjacent input rows because we demanded + * context from the main buffer controller (see initialization code). + */ + +METHODDEF void +h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr0, inptr1, outptr; +#if BITS_IN_JSAMPLE == 8 + register int thiscolsum, lastcolsum, nextcolsum; +#else + register INT32 thiscolsum, lastcolsum, nextcolsum; +#endif + register JDIMENSION colctr; + int inrow, outrow, v; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + for (v = 0; v < 2; v++) { + /* inptr0 points to nearest input row, inptr1 points to next nearest */ + inptr0 = input_data[inrow]; + if (v == 0) /* next nearest is row above */ + inptr1 = input_data[inrow-1]; + else /* next nearest is row below */ + inptr1 = input_data[inrow+1]; + outptr = output_data[outrow++]; + + /* Special case for first column */ + thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); + nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); + *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4); + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); + lastcolsum = thiscolsum; thiscolsum = nextcolsum; + + for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { + /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */ + /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */ + nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); + lastcolsum = thiscolsum; thiscolsum = nextcolsum; + } + + /* Special case for last column */ + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); + *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4); + } + inrow++; + } +} + + +/* + * Module initialization routine for upsampling. + */ + +GLOBAL void +jinit_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + int ci; + jpeg_component_info * compptr; + boolean need_buffer, do_fancy; + int h_in_group, v_in_group, h_out_group, v_out_group; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_upsample; + upsample->pub.upsample = sep_upsample; + upsample->pub.need_context_rows = FALSE; /* until we find out differently */ + + if (cinfo->CCIR601_sampling) /* this isn't supported */ + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1, + * so don't ask for it. + */ + do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1; + + /* Verify we can handle the sampling factors, select per-component methods, + * and create storage as needed. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "input group" after IDCT scaling. This many samples + * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. + */ + h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; + v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; + h_out_group = cinfo->max_h_samp_factor; + v_out_group = cinfo->max_v_samp_factor; + upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ + need_buffer = TRUE; + if (! compptr->component_needed) { + /* Don't bother to upsample an uninteresting component. */ + upsample->methods[ci] = noop_upsample; + need_buffer = FALSE; + } else if (h_in_group == h_out_group && v_in_group == v_out_group) { + /* Fullsize components can be processed without any work. */ + upsample->methods[ci] = fullsize_upsample; + need_buffer = FALSE; + } else if (h_in_group * 2 == h_out_group && + v_in_group == v_out_group) { + /* Special cases for 2h1v upsampling */ + if (do_fancy && compptr->downsampled_width > 2) + upsample->methods[ci] = h2v1_fancy_upsample; + else + upsample->methods[ci] = h2v1_upsample; + } else if (h_in_group * 2 == h_out_group && + v_in_group * 2 == v_out_group) { + /* Special cases for 2h2v upsampling */ + if (do_fancy && compptr->downsampled_width > 2) { + upsample->methods[ci] = h2v2_fancy_upsample; + upsample->pub.need_context_rows = TRUE; + } else + upsample->methods[ci] = h2v2_upsample; + } else if ((h_out_group % h_in_group) == 0 && + (v_out_group % v_in_group) == 0) { + /* Generic integral-factors upsampling method */ + upsample->methods[ci] = int_upsample; + upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); + upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + if (need_buffer) { + upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) jround_up((long) cinfo->output_width, + (long) cinfo->max_h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} diff --git a/libs/jpeg6/jdtrans.cpp b/libs/jpeg6/jdtrans.cpp index eb873e0..5c14adc 100755 --- a/libs/jpeg6/jdtrans.cpp +++ b/libs/jpeg6/jdtrans.cpp @@ -1,122 +1,122 @@ -/* - * jdtrans.c - * - * Copyright (C) 1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding decompression, - * that is, reading raw DCT coefficient arrays from an input JPEG file. - * The routines in jdapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL void transdecode_master_selection JPP((j_decompress_ptr cinfo)); - - -/* - * Read the coefficient arrays from a JPEG file. - * jpeg_read_header must be completed before calling this. - * - * The entire image is read into a set of virtual coefficient-block arrays, - * one per component. The return value is a pointer to the array of - * virtual-array descriptors. These can be manipulated directly via the - * JPEG memory manager, or handed off to jpeg_write_coefficients(). - * To release the memory occupied by the virtual arrays, call - * jpeg_finish_decompress() when done with the data. - * - * Returns NULL if suspended. This case need be checked only if - * a suspending data source is used. - */ - -GLOBAL jvirt_barray_ptr * -jpeg_read_coefficients (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize active modules */ - transdecode_master_selection(cinfo); - cinfo->global_state = DSTATE_RDCOEFS; - } else if (cinfo->global_state != DSTATE_RDCOEFS) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Absorb whole file into the coef buffer */ - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return NULL; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* startup underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } - /* Set state so that jpeg_finish_decompress does the right thing */ - cinfo->global_state = DSTATE_STOPPING; - return cinfo->coef->coef_arrays; -} - - -/* - * Master selection of decompression modules for transcoding. - * This substitutes for jdmaster.c's initialization of the full decompressor. - */ - -LOCAL void -transdecode_master_selection (j_decompress_ptr cinfo) -{ - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); - } - - /* Always get a full-image coefficient buffer. */ - jinit_d_coef_controller(cinfo, TRUE); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - - /* Initialize progress monitoring. */ - if (cinfo->progress != NULL) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else if (cinfo->inputctl->has_multiple_scans) { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } else { - nscans = 1; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = 1; - } -} +/* + * jdtrans.c + * + * Copyright (C) 1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding decompression, + * that is, reading raw DCT coefficient arrays from an input JPEG file. + * The routines in jdapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL void transdecode_master_selection JPP((j_decompress_ptr cinfo)); + + +/* + * Read the coefficient arrays from a JPEG file. + * jpeg_read_header must be completed before calling this. + * + * The entire image is read into a set of virtual coefficient-block arrays, + * one per component. The return value is a pointer to the array of + * virtual-array descriptors. These can be manipulated directly via the + * JPEG memory manager, or handed off to jpeg_write_coefficients(). + * To release the memory occupied by the virtual arrays, call + * jpeg_finish_decompress() when done with the data. + * + * Returns NULL if suspended. This case need be checked only if + * a suspending data source is used. + */ + +GLOBAL jvirt_barray_ptr * +jpeg_read_coefficients (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize active modules */ + transdecode_master_selection(cinfo); + cinfo->global_state = DSTATE_RDCOEFS; + } else if (cinfo->global_state != DSTATE_RDCOEFS) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Absorb whole file into the coef buffer */ + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return NULL; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* startup underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } + /* Set state so that jpeg_finish_decompress does the right thing */ + cinfo->global_state = DSTATE_STOPPING; + return cinfo->coef->coef_arrays; +} + + +/* + * Master selection of decompression modules for transcoding. + * This substitutes for jdmaster.c's initialization of the full decompressor. + */ + +LOCAL void +transdecode_master_selection (j_decompress_ptr cinfo) +{ + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef D_PROGRESSIVE_SUPPORTED + jinit_phuff_decoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_decoder(cinfo); + } + + /* Always get a full-image coefficient buffer. */ + jinit_d_coef_controller(cinfo, TRUE); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + + /* Initialize progress monitoring. */ + if (cinfo->progress != NULL) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else if (cinfo->inputctl->has_multiple_scans) { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } else { + nscans = 1; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = 1; + } +} diff --git a/libs/jpeg6/jerror.cpp b/libs/jpeg6/jerror.cpp index 09027d8..595f371 100755 --- a/libs/jpeg6/jerror.cpp +++ b/libs/jpeg6/jerror.cpp @@ -1,231 +1,231 @@ -/* - * jerror.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains simple error-reporting and trace-message routines. - * These are suitable for Unix-like systems and others where writing to - * stderr is the right thing to do. Many applications will want to replace - * some or all of these routines. - * - * These routines are used by both the compression and decompression code. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jversion.h" -#include "jerror.h" - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif - - -/* - * Create the message string table. - * We do this from the master message list in jerror.h by re-reading - * jerror.h with a suitable definition for macro JMESSAGE. - * The message table is made an external symbol just in case any applications - * want to refer to it directly. - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_message_table jMsgTable -#endif - -#define JMESSAGE(code,string) string , - -const char * const jpeg_std_message_table[] = { -#include "jerror.h" - NULL -}; - - -/* - * Error exit handler: must not return to caller. - * - * Applications may override this if they want to get control back after - * an error. Typically one would longjmp somewhere instead of exiting. - * The setjmp buffer can be made a private field within an expanded error - * handler object. Note that the info needed to generate an error message - * is stored in the error object, so you can generate the message now or - * later, at your convenience. - * You should make sure that the JPEG object is cleaned up (with jpeg_abort - * or jpeg_destroy) at some point. - */ - -METHODDEF void -error_exit (j_common_ptr cinfo) -{ - char buffer[JMSG_LENGTH_MAX]; - - /* Create the message */ - (*cinfo->err->format_message) (cinfo, buffer); - - /* Let the memory manager delete any temp files before we die */ - jpeg_destroy(cinfo); - - // FIXME: need to get this setup with an error handler - //Error("%s\n", buffer ); -} - - -/* - * Actual output of an error or trace message. - * Applications may override this method to send JPEG messages somewhere - * other than stderr. - */ - -METHODDEF void -output_message (j_common_ptr cinfo) -{ - char buffer[JMSG_LENGTH_MAX]; - - /* Create the message */ - (*cinfo->err->format_message) (cinfo, buffer); - - /* Send it to stderr, adding a newline */ - printf("%s\n", buffer); -} - - -/* - * Decide whether to emit a trace or warning message. - * msg_level is one of: - * -1: recoverable corrupt-data warning, may want to abort. - * 0: important advisory messages (always display to user). - * 1: first level of tracing detail. - * 2,3,...: successively more detailed tracing messages. - * An application might override this method if it wanted to abort on warnings - * or change the policy about which messages to display. - */ - -METHODDEF void -emit_message (j_common_ptr cinfo, int msg_level) -{ - struct jpeg_error_mgr * err = cinfo->err; - - if (msg_level < 0) { - /* It's a warning message. Since corrupt files may generate many warnings, - * the policy implemented here is to show only the first warning, - * unless trace_level >= 3. - */ - if (err->num_warnings == 0 || err->trace_level >= 3) - (*err->output_message) (cinfo); - /* Always count warnings in num_warnings. */ - err->num_warnings++; - } else { - /* It's a trace message. Show it if trace_level >= msg_level. */ - if (err->trace_level >= msg_level) - (*err->output_message) (cinfo); - } -} - - -/* - * Format a message string for the most recent JPEG error or message. - * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX - * characters. Note that no '\n' character is added to the string. - * Few applications should need to override this method. - */ - -METHODDEF void -format_message (j_common_ptr cinfo, char * buffer) -{ - struct jpeg_error_mgr * err = cinfo->err; - int msg_code = err->msg_code; - const char * msgtext = NULL; - const char * msgptr; - char ch; - boolean isstring; - - /* Look up message string in proper table */ - if (msg_code > 0 && msg_code <= err->last_jpeg_message) { - msgtext = err->jpeg_message_table[msg_code]; - } else if (err->addon_message_table != NULL && - msg_code >= err->first_addon_message && - msg_code <= err->last_addon_message) { - msgtext = err->addon_message_table[msg_code - err->first_addon_message]; - } - - /* Defend against bogus message number */ - if (msgtext == NULL) { - err->msg_parm.i[0] = msg_code; - msgtext = err->jpeg_message_table[0]; - } - - /* Check for string parameter, as indicated by %s in the message text */ - isstring = FALSE; - msgptr = msgtext; - while ((ch = *msgptr++) != '\0') { - if (ch == '%') { - if (*msgptr == 's') isstring = TRUE; - break; - } - } - - /* Format the message into the passed buffer */ - if (isstring) - sprintf(buffer, msgtext, err->msg_parm.s); - else - sprintf(buffer, msgtext, - err->msg_parm.i[0], err->msg_parm.i[1], - err->msg_parm.i[2], err->msg_parm.i[3], - err->msg_parm.i[4], err->msg_parm.i[5], - err->msg_parm.i[6], err->msg_parm.i[7]); -} - - -/* - * Reset error state variables at start of a new image. - * This is called during compression startup to reset trace/error - * processing to default state, without losing any application-specific - * method pointers. An application might possibly want to override - * this method if it has additional error processing state. - */ - -METHODDEF void -reset_error_mgr (j_common_ptr cinfo) -{ - cinfo->err->num_warnings = 0; - /* trace_level is not reset since it is an application-supplied parameter */ - cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ -} - - -/* - * Fill in the standard error-handling methods in a jpeg_error_mgr object. - * Typical call is: - * struct jpeg_compress_struct cinfo; - * struct jpeg_error_mgr err; - * - * cinfo.err = jpeg_std_error(&err); - * after which the application may override some of the methods. - */ - -GLOBAL struct jpeg_error_mgr * -jpeg_std_error (struct jpeg_error_mgr * err) -{ - err->error_exit = error_exit; - err->emit_message = emit_message; - err->output_message = output_message; - err->format_message = format_message; - err->reset_error_mgr = reset_error_mgr; - - err->trace_level = 0; /* default = no tracing */ - err->num_warnings = 0; /* no warnings emitted yet */ - err->msg_code = 0; /* may be useful as a flag for "no error" */ - - /* Initialize message table pointers */ - err->jpeg_message_table = jpeg_std_message_table; - err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; - - err->addon_message_table = NULL; - err->first_addon_message = 0; /* for safety */ - err->last_addon_message = 0; - - return err; -} +/* + * jerror.c + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains simple error-reporting and trace-message routines. + * These are suitable for Unix-like systems and others where writing to + * stderr is the right thing to do. Many applications will want to replace + * some or all of these routines. + * + * These routines are used by both the compression and decompression code. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jversion.h" +#include "jerror.h" + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif + + +/* + * Create the message string table. + * We do this from the master message list in jerror.h by re-reading + * jerror.h with a suitable definition for macro JMESSAGE. + * The message table is made an external symbol just in case any applications + * want to refer to it directly. + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_message_table jMsgTable +#endif + +#define JMESSAGE(code,string) string , + +const char * const jpeg_std_message_table[] = { +#include "jerror.h" + NULL +}; + + +/* + * Error exit handler: must not return to caller. + * + * Applications may override this if they want to get control back after + * an error. Typically one would longjmp somewhere instead of exiting. + * The setjmp buffer can be made a private field within an expanded error + * handler object. Note that the info needed to generate an error message + * is stored in the error object, so you can generate the message now or + * later, at your convenience. + * You should make sure that the JPEG object is cleaned up (with jpeg_abort + * or jpeg_destroy) at some point. + */ + +METHODDEF void +error_exit (j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + /* Create the message */ + (*cinfo->err->format_message) (cinfo, buffer); + + /* Let the memory manager delete any temp files before we die */ + jpeg_destroy(cinfo); + + // FIXME: need to get this setup with an error handler + //Error("%s\n", buffer ); +} + + +/* + * Actual output of an error or trace message. + * Applications may override this method to send JPEG messages somewhere + * other than stderr. + */ + +METHODDEF void +output_message (j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + /* Create the message */ + (*cinfo->err->format_message) (cinfo, buffer); + + /* Send it to stderr, adding a newline */ + printf("%s\n", buffer); +} + + +/* + * Decide whether to emit a trace or warning message. + * msg_level is one of: + * -1: recoverable corrupt-data warning, may want to abort. + * 0: important advisory messages (always display to user). + * 1: first level of tracing detail. + * 2,3,...: successively more detailed tracing messages. + * An application might override this method if it wanted to abort on warnings + * or change the policy about which messages to display. + */ + +METHODDEF void +emit_message (j_common_ptr cinfo, int msg_level) +{ + struct jpeg_error_mgr * err = cinfo->err; + + if (msg_level < 0) { + /* It's a warning message. Since corrupt files may generate many warnings, + * the policy implemented here is to show only the first warning, + * unless trace_level >= 3. + */ + if (err->num_warnings == 0 || err->trace_level >= 3) + (*err->output_message) (cinfo); + /* Always count warnings in num_warnings. */ + err->num_warnings++; + } else { + /* It's a trace message. Show it if trace_level >= msg_level. */ + if (err->trace_level >= msg_level) + (*err->output_message) (cinfo); + } +} + + +/* + * Format a message string for the most recent JPEG error or message. + * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX + * characters. Note that no '\n' character is added to the string. + * Few applications should need to override this method. + */ + +METHODDEF void +format_message (j_common_ptr cinfo, char * buffer) +{ + struct jpeg_error_mgr * err = cinfo->err; + int msg_code = err->msg_code; + const char * msgtext = NULL; + const char * msgptr; + char ch; + boolean isstring; + + /* Look up message string in proper table */ + if (msg_code > 0 && msg_code <= err->last_jpeg_message) { + msgtext = err->jpeg_message_table[msg_code]; + } else if (err->addon_message_table != NULL && + msg_code >= err->first_addon_message && + msg_code <= err->last_addon_message) { + msgtext = err->addon_message_table[msg_code - err->first_addon_message]; + } + + /* Defend against bogus message number */ + if (msgtext == NULL) { + err->msg_parm.i[0] = msg_code; + msgtext = err->jpeg_message_table[0]; + } + + /* Check for string parameter, as indicated by %s in the message text */ + isstring = FALSE; + msgptr = msgtext; + while ((ch = *msgptr++) != '\0') { + if (ch == '%') { + if (*msgptr == 's') isstring = TRUE; + break; + } + } + + /* Format the message into the passed buffer */ + if (isstring) + sprintf(buffer, msgtext, err->msg_parm.s); + else + sprintf(buffer, msgtext, + err->msg_parm.i[0], err->msg_parm.i[1], + err->msg_parm.i[2], err->msg_parm.i[3], + err->msg_parm.i[4], err->msg_parm.i[5], + err->msg_parm.i[6], err->msg_parm.i[7]); +} + + +/* + * Reset error state variables at start of a new image. + * This is called during compression startup to reset trace/error + * processing to default state, without losing any application-specific + * method pointers. An application might possibly want to override + * this method if it has additional error processing state. + */ + +METHODDEF void +reset_error_mgr (j_common_ptr cinfo) +{ + cinfo->err->num_warnings = 0; + /* trace_level is not reset since it is an application-supplied parameter */ + cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ +} + + +/* + * Fill in the standard error-handling methods in a jpeg_error_mgr object. + * Typical call is: + * struct jpeg_compress_struct cinfo; + * struct jpeg_error_mgr err; + * + * cinfo.err = jpeg_std_error(&err); + * after which the application may override some of the methods. + */ + +GLOBAL struct jpeg_error_mgr * +jpeg_std_error (struct jpeg_error_mgr * err) +{ + err->error_exit = error_exit; + err->emit_message = emit_message; + err->output_message = output_message; + err->format_message = format_message; + err->reset_error_mgr = reset_error_mgr; + + err->trace_level = 0; /* default = no tracing */ + err->num_warnings = 0; /* no warnings emitted yet */ + err->msg_code = 0; /* may be useful as a flag for "no error" */ + + /* Initialize message table pointers */ + err->jpeg_message_table = jpeg_std_message_table; + err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; + + err->addon_message_table = NULL; + err->first_addon_message = 0; /* for safety */ + err->last_addon_message = 0; + + return err; +} diff --git a/libs/jpeg6/jerror.h b/libs/jpeg6/jerror.h index 0ffb8b4..bf60e7e 100755 --- a/libs/jpeg6/jerror.h +++ b/libs/jpeg6/jerror.h @@ -1,273 +1,273 @@ -/* - * jerror.h - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the error and message codes for the JPEG library. - * Edit this file to add new codes, or to translate the message strings to - * some other language. - * A set of error-reporting macros are defined too. Some applications using - * the JPEG library may wish to include this file to get the error codes - * and/or the macros. - */ - -/* - * To define the enum list of message codes, include this file without - * defining macro JMESSAGE. To create a message string table, include it - * again with a suitable JMESSAGE definition (see jerror.c for an example). - */ -#ifndef JMESSAGE -#ifndef JERROR_H -/* First time through, define the enum list */ -#define JMAKE_ENUM_LIST -#else -/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ -#define JMESSAGE(code,string) -#endif /* JERROR_H */ -#endif /* JMESSAGE */ - -#ifdef JMAKE_ENUM_LIST - -typedef enum { - -#define JMESSAGE(code,string) code , - -#endif /* JMAKE_ENUM_LIST */ - -JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ - -/* For maintenance convenience, list is alphabetical by message code name */ -JMESSAGE(JERR_ARITH_NOTIMPL, - "Sorry, there are legal restrictions on arithmetic coding") -JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") -JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") -JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") -JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") -JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") -JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") -JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") -JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") -JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") -JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") -JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") -JMESSAGE(JERR_BAD_PROGRESSION, - "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") -JMESSAGE(JERR_BAD_PROG_SCRIPT, - "Invalid progressive parameters at scan script entry %d") -JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") -JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") -JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") -JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") -JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") -JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") -JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") -JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") -JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") -JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") -JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") -JMESSAGE(JERR_DHT_COUNTS, "Bogus DHT counts") -JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") -JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") -JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") -JMESSAGE(JERR_EMS_READ, "Read from EMS failed") -JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") -JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") -JMESSAGE(JERR_FILE_READ, "Input file read error") -JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") -JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") -JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") -JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") -JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") -JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") -JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") -JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, - "Cannot transcode due to multiple use of quantization table %d") -JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") -JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") -JMESSAGE(JERR_NOTIMPL, "Not implemented yet") -JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") -JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") -JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") -JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") -JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") -JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") -JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") -JMESSAGE(JERR_QUANT_COMPONENTS, - "Cannot quantize more than %d color components") -JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") -JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") -JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") -JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") -JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") -JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") -JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") -JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") -JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") -JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") -JMESSAGE(JERR_TFILE_WRITE, - "Write failed on temporary file --- out of disk space?") -JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") -JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") -JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") -JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") -JMESSAGE(JERR_XMS_READ, "Read from XMS failed") -JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") -JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) -JMESSAGE(JMSG_VERSION, JVERSION) -JMESSAGE(JTRC_16BIT_TABLES, - "Caution: quantization tables are too coarse for baseline JPEG") -JMESSAGE(JTRC_ADOBE, - "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") -JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") -JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") -JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") -JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") -JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") -JMESSAGE(JTRC_DRI, "Define Restart Interval %u") -JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") -JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") -JMESSAGE(JTRC_EOI, "End Of Image") -JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") -JMESSAGE(JTRC_JFIF, "JFIF APP0 marker, density %dx%d %d") -JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, - "Warning: thumbnail image size does not match data length %u") -JMESSAGE(JTRC_JFIF_MINOR, "Unknown JFIF minor revision number %d.%02d") -JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") -JMESSAGE(JTRC_MISC_MARKER, "Skipping marker 0x%02x, length %u") -JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") -JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") -JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") -JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") -JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") -JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") -JMESSAGE(JTRC_RST, "RST%d") -JMESSAGE(JTRC_SMOOTH_NOTIMPL, - "Smoothing not supported with nonstandard sampling ratios") -JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") -JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") -JMESSAGE(JTRC_SOI, "Start of Image") -JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") -JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") -JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") -JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") -JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") -JMESSAGE(JTRC_UNKNOWN_IDS, - "Unrecognized component IDs %d %d %d, assuming YCbCr") -JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") -JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") -JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") -JMESSAGE(JWRN_BOGUS_PROGRESSION, - "Inconsistent progression sequence for component %d coefficient %d") -JMESSAGE(JWRN_EXTRANEOUS_DATA, - "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") -JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") -JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") -JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") -JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") -JMESSAGE(JWRN_MUST_RESYNC, - "Corrupt JPEG data: found marker 0x%02x instead of RST%d") -JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") -JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") - -#ifdef JMAKE_ENUM_LIST - - JMSG_LASTMSGCODE -} J_MESSAGE_CODE; - -#undef JMAKE_ENUM_LIST -#endif /* JMAKE_ENUM_LIST */ - -/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ -#undef JMESSAGE - - -#ifndef JERROR_H -#define JERROR_H - -/* Macros to simplify using the error and trace message stuff */ -/* The first parameter is either type of cinfo pointer */ - -/* Fatal errors (print message and exit) */ -#define ERREXIT(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT3(cinfo,code,p1,p2,p3) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (cinfo)->err->msg_parm.i[3] = (p4), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXITS(cinfo,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) - -#define MAKESTMT(stuff) do { stuff } while (0) - -/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ -#define WARNMS(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) - -/* Informational/debugging messages */ -#define TRACEMS(cinfo,lvl,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS1(cinfo,lvl,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS2(cinfo,lvl,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMSS(cinfo,lvl,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) - -#endif /* JERROR_H */ +/* + * jerror.h + * + * Copyright (C) 1994-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +JMESSAGE(JERR_ARITH_NOTIMPL, + "Sorry, there are legal restrictions on arithmetic coding") +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_COUNTS, "Bogus DHT counts") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_MINOR, "Unknown JFIF minor revision number %d.%02d") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Skipping marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/libs/jpeg6/jfdctflt.cpp b/libs/jpeg6/jfdctflt.cpp index 1509b88..21371eb 100755 --- a/libs/jpeg6/jfdctflt.cpp +++ b/libs/jpeg6/jfdctflt.cpp @@ -1,168 +1,168 @@ -/* - * jfdctflt.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * forward DCT (Discrete Cosine Transform). - * - * This implementation should be more accurate than either of the integer - * DCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL void -jpeg_fdct_float (FAST_FLOAT * data) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; - FAST_FLOAT *dataptr; - int ctr; - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ +/* + * jfdctflt.c + * + * Copyright (C) 1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * forward DCT (Discrete Cosine Transform). + * + * This implementation should be more accurate than either of the integer + * DCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL void +jpeg_fdct_float (FAST_FLOAT * data) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; + FAST_FLOAT *dataptr; + int ctr; + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[0] + dataptr[7]; + tmp7 = dataptr[0] - dataptr[7]; + tmp1 = dataptr[1] + dataptr[6]; + tmp6 = dataptr[1] - dataptr[6]; + tmp2 = dataptr[2] + dataptr[5]; + tmp5 = dataptr[2] - dataptr[5]; + tmp3 = dataptr[3] + dataptr[4]; + tmp4 = dataptr[3] - dataptr[4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[0] = tmp10 + tmp11; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/libs/jpeg6/jidctflt.cpp b/libs/jpeg6/jidctflt.cpp index 2e25c44..847919e 100755 --- a/libs/jpeg6/jidctflt.cpp +++ b/libs/jpeg6/jidctflt.cpp @@ -1,241 +1,241 @@ -/* - * jidctflt.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * This implementation should be more accurate than either of the integer - * IDCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a float result. - */ - -#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL void -jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z5, z10, z11, z12, z13; - JCOEFPTR inptr; - FLOAT_MULT_TYPE * quantptr; - FAST_FLOAT * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] | - inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | - inptr[DCTSIZE*7]) == 0) { - /* AC terms all zero */ - FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - wsptr[DCTSIZE*0] = tmp0 + tmp7; - wsptr[DCTSIZE*7] = tmp0 - tmp7; - wsptr[DCTSIZE*1] = tmp1 + tmp6; - wsptr[DCTSIZE*6] = tmp1 - tmp6; - wsptr[DCTSIZE*2] = tmp2 + tmp5; - wsptr[DCTSIZE*5] = tmp2 - tmp5; - wsptr[DCTSIZE*4] = tmp3 + tmp4; - wsptr[DCTSIZE*3] = tmp3 - tmp4; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * And testing floats for zero is relatively expensive, so we don't bother. - */ - - /* Even part */ - - tmp10 = wsptr[0] + wsptr[4]; - tmp11 = wsptr[0] - wsptr[4]; - - tmp13 = wsptr[2] + wsptr[6]; - tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = wsptr[5] + wsptr[3]; - z10 = wsptr[5] - wsptr[3]; - z11 = wsptr[1] + wsptr[7]; - z12 = wsptr[1] - wsptr[7]; - - tmp7 = z11 + z13; - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ +/* + * jidctflt.c + * + * Copyright (C) 1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * This implementation should be more accurate than either of the integer + * IDCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a float result. + */ + +#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL void +jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z5, z10, z11, z12, z13; + JCOEFPTR inptr; + FLOAT_MULT_TYPE * quantptr; + FAST_FLOAT * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] | + inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | + inptr[DCTSIZE*7]) == 0) { + /* AC terms all zero */ + FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ + tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + wsptr[DCTSIZE*0] = tmp0 + tmp7; + wsptr[DCTSIZE*7] = tmp0 - tmp7; + wsptr[DCTSIZE*1] = tmp1 + tmp6; + wsptr[DCTSIZE*6] = tmp1 - tmp6; + wsptr[DCTSIZE*2] = tmp2 + tmp5; + wsptr[DCTSIZE*5] = tmp2 - tmp5; + wsptr[DCTSIZE*4] = tmp3 + tmp4; + wsptr[DCTSIZE*3] = tmp3 - tmp4; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * And testing floats for zero is relatively expensive, so we don't bother. + */ + + /* Even part */ + + tmp10 = wsptr[0] + wsptr[4]; + tmp11 = wsptr[0] - wsptr[4]; + + tmp13 = wsptr[2] + wsptr[6]; + tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = wsptr[5] + wsptr[3]; + z10 = wsptr[5] - wsptr[3]; + z11 = wsptr[1] + wsptr[7]; + z12 = wsptr[1] - wsptr[7]; + + tmp7 = z11 + z13; + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ + tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + /* Final output stage: scale down by a factor of 8 and range-limit */ + + outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/libs/jpeg6/jinclude.h b/libs/jpeg6/jinclude.h index 5ff60fe..0a4f151 100755 --- a/libs/jpeg6/jinclude.h +++ b/libs/jpeg6/jinclude.h @@ -1,91 +1,91 @@ -/* - * jinclude.h - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file exists to provide a single place to fix any problems with - * including the wrong system include files. (Common problems are taken - * care of by the standard jconfig symbols, but on really weird systems - * you may have to edit this file.) - * - * NOTE: this file is NOT intended to be included by applications using the - * JPEG library. Most applications need only include jpeglib.h. - */ - - -/* Include auto-config file to find out which system include files we need. */ - -#include "jconfig.h" /* auto configuration options */ -#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ - -/* - * We need the NULL macro and size_t typedef. - * On an ANSI-conforming system it is sufficient to include . - * Otherwise, we get them from or ; we may have to - * pull in as well. - * Note that the core JPEG library does not require ; - * only the default error handler and data source/destination modules do. - * But we must pull it in because of the references to FILE in jpeglib.h. - * You can remove those references if you want to compile without . - */ - -#ifdef HAVE_STDDEF_H -#include -#endif - -#ifdef HAVE_STDLIB_H -#include -#endif - -#ifdef NEED_SYS_TYPES_H -#include -#endif - -#include - -/* - * We need memory copying and zeroing functions, plus strncpy(). - * ANSI and System V implementations declare these in . - * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). - * Some systems may declare memset and memcpy in . - * - * NOTE: we assume the size parameters to these functions are of type size_t. - * Change the casts in these macros if not! - */ - -#ifdef NEED_BSD_STRINGS - -#include -#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) -#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) - -#else /* not BSD, assume ANSI/SysV string lib */ - -#include -#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) -#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) - -#endif - -/* - * In ANSI C, and indeed any rational implementation, size_t is also the - * type returned by sizeof(). However, it seems there are some irrational - * implementations out there, in which sizeof() returns an int even though - * size_t is defined as long or unsigned long. To ensure consistent results - * we always use this SIZEOF() macro in place of using sizeof() directly. - */ - -#define SIZEOF(object) ((size_t) sizeof(object)) - -/* - * The modules that use fread() and fwrite() always invoke them through - * these macros. On some systems you may need to twiddle the argument casts. - * CAUTION: argument order is different from underlying functions! - */ - -#define JFREAD(file,buf,sizeofbuf) \ - ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) -#define JFWRITE(file,buf,sizeofbuf) \ - ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +/* + * jinclude.h + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file exists to provide a single place to fix any problems with + * including the wrong system include files. (Common problems are taken + * care of by the standard jconfig symbols, but on really weird systems + * you may have to edit this file.) + * + * NOTE: this file is NOT intended to be included by applications using the + * JPEG library. Most applications need only include jpeglib.h. + */ + + +/* Include auto-config file to find out which system include files we need. */ + +#include "jconfig.h" /* auto configuration options */ +#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ + +/* + * We need the NULL macro and size_t typedef. + * On an ANSI-conforming system it is sufficient to include . + * Otherwise, we get them from or ; we may have to + * pull in as well. + * Note that the core JPEG library does not require ; + * only the default error handler and data source/destination modules do. + * But we must pull it in because of the references to FILE in jpeglib.h. + * You can remove those references if you want to compile without . + */ + +#ifdef HAVE_STDDEF_H +#include +#endif + +#ifdef HAVE_STDLIB_H +#include +#endif + +#ifdef NEED_SYS_TYPES_H +#include +#endif + +#include + +/* + * We need memory copying and zeroing functions, plus strncpy(). + * ANSI and System V implementations declare these in . + * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). + * Some systems may declare memset and memcpy in . + * + * NOTE: we assume the size parameters to these functions are of type size_t. + * Change the casts in these macros if not! + */ + +#ifdef NEED_BSD_STRINGS + +#include +#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) +#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) + +#else /* not BSD, assume ANSI/SysV string lib */ + +#include +#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) +#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) + +#endif + +/* + * In ANSI C, and indeed any rational implementation, size_t is also the + * type returned by sizeof(). However, it seems there are some irrational + * implementations out there, in which sizeof() returns an int even though + * size_t is defined as long or unsigned long. To ensure consistent results + * we always use this SIZEOF() macro in place of using sizeof() directly. + */ + +#define SIZEOF(object) ((size_t) sizeof(object)) + +/* + * The modules that use fread() and fwrite() always invoke them through + * these macros. On some systems you may need to twiddle the argument casts. + * CAUTION: argument order is different from underlying functions! + */ + +#define JFREAD(file,buf,sizeofbuf) \ + ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFWRITE(file,buf,sizeofbuf) \ + ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/libs/jpeg6/jmemmgr.cpp b/libs/jpeg6/jmemmgr.cpp index 61045f9..dc3e1c7 100755 --- a/libs/jpeg6/jmemmgr.cpp +++ b/libs/jpeg6/jmemmgr.cpp @@ -1,1115 +1,1115 @@ -/* - * jmemmgr.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the JPEG system-independent memory management - * routines. This code is usable across a wide variety of machines; most - * of the system dependencies have been isolated in a separate file. - * The major functions provided here are: - * * pool-based allocation and freeing of memory; - * * policy decisions about how to divide available memory among the - * virtual arrays; - * * control logic for swapping virtual arrays between main memory and - * backing storage. - * The separate system-dependent file provides the actual backing-storage - * access code, and it contains the policy decision about how much total - * main memory to use. - * This file is system-dependent in the sense that some of its functions - * are unnecessary in some systems. For example, if there is enough virtual - * memory so that backing storage will never be used, much of the virtual - * array control logic could be removed. (Of course, if you have that much - * memory then you shouldn't care about a little bit of unused code...) - */ - -#define JPEG_INTERNALS -#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef NO_GETENV -#ifndef HAVE_STDLIB_H /* should declare getenv() */ -extern char * getenv JPP((const char * name)); -#endif -#endif - - -/* - * Some important notes: - * The allocation routines provided here must never return NULL. - * They should exit to error_exit if unsuccessful. - * - * It's not a good idea to try to merge the sarray and barray routines, - * even though they are textually almost the same, because samples are - * usually stored as bytes while coefficients are shorts or ints. Thus, - * in machines where byte pointers have a different representation from - * word pointers, the resulting machine code could not be the same. - */ - - -/* - * Many machines require storage alignment: longs must start on 4-byte - * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() - * always returns pointers that are multiples of the worst-case alignment - * requirement, and we had better do so too. - * There isn't any really portable way to determine the worst-case alignment - * requirement. This module assumes that the alignment requirement is - * multiples of sizeof(ALIGN_TYPE). - * By default, we define ALIGN_TYPE as double. This is necessary on some - * workstations (where doubles really do need 8-byte alignment) and will work - * fine on nearly everything. If your machine has lesser alignment needs, - * you can save a few bytes by making ALIGN_TYPE smaller. - * The only place I know of where this will NOT work is certain Macintosh - * 680x0 compilers that define double as a 10-byte IEEE extended float. - * Doing 10-byte alignment is counterproductive because longwords won't be - * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have - * such a compiler. - */ - -#ifndef ALIGN_TYPE /* so can override from jconfig.h */ -#define ALIGN_TYPE double -#endif - - -/* - * We allocate objects from "pools", where each pool is gotten with a single - * request to jpeg_get_small() or jpeg_get_large(). There is no per-object - * overhead within a pool, except for alignment padding. Each pool has a - * header with a link to the next pool of the same class. - * Small and large pool headers are identical except that the latter's - * link pointer must be FAR on 80x86 machines. - * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE - * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple - * of the alignment requirement of ALIGN_TYPE. - */ - -typedef union small_pool_struct * small_pool_ptr; - -typedef union small_pool_struct { - struct { - small_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} small_pool_hdr; - -typedef union large_pool_struct FAR * large_pool_ptr; - -typedef union large_pool_struct { - struct { - large_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} large_pool_hdr; - - -/* - * Here is the full definition of a memory manager object. - */ - -typedef struct { - struct jpeg_memory_mgr pub; /* public fields */ - - /* Each pool identifier (lifetime class) names a linked list of pools. */ - small_pool_ptr small_list[JPOOL_NUMPOOLS]; - large_pool_ptr large_list[JPOOL_NUMPOOLS]; - - /* Since we only have one lifetime class of virtual arrays, only one - * linked list is necessary (for each datatype). Note that the virtual - * array control blocks being linked together are actually stored somewhere - * in the small-pool list. - */ - jvirt_sarray_ptr virt_sarray_list; - jvirt_barray_ptr virt_barray_list; - - /* This counts total space obtained from jpeg_get_small/large */ - long total_space_allocated; - - /* alloc_sarray and alloc_barray set this value for use by virtual - * array routines. - */ - JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ -} my_memory_mgr; - -typedef my_memory_mgr * my_mem_ptr; - - -/* - * The control blocks for virtual arrays. - * Note that these blocks are allocated in the "small" pool area. - * System-dependent info for the associated backing store (if any) is hidden - * inside the backing_store_info struct. - */ - -struct jvirt_sarray_control { - JSAMPARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_sarray_ptr next; /* link to next virtual sarray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - -struct jvirt_barray_control { - JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_barray_ptr next; /* link to next virtual barray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - - -#ifdef MEM_STATS /* optional extra stuff for statistics */ - -LOCAL void -print_mem_stats (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - - /* Since this is only a debugging stub, we can cheat a little by using - * fprintf directly rather than going through the trace message code. - * This is helpful because message parm array can't handle longs. - */ - fprintf(stderr, "Freeing pool %d, total space = %ld\n", - pool_id, mem->total_space_allocated); - - for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; - lhdr_ptr = lhdr_ptr->hdr.next) { - fprintf(stderr, " Large chunk used %ld\n", - (long) lhdr_ptr->hdr.bytes_used); - } - - for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; - shdr_ptr = shdr_ptr->hdr.next) { - fprintf(stderr, " Small chunk used %ld free %ld\n", - (long) shdr_ptr->hdr.bytes_used, - (long) shdr_ptr->hdr.bytes_left); - } -} - -#endif /* MEM_STATS */ - - -LOCAL void -out_of_memory (j_common_ptr cinfo, int which) -/* Report an out-of-memory error and stop execution */ -/* If we compiled MEM_STATS support, report alloc requests before dying */ -{ -#ifdef MEM_STATS - cinfo->err->trace_level = 2; /* force self_destruct to report stats */ -#endif - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); -} - - -/* - * Allocation of "small" objects. - * - * For these, we use pooled storage. When a new pool must be created, - * we try to get enough space for the current request plus a "slop" factor, - * where the slop will be the amount of leftover space in the new pool. - * The speed vs. space tradeoff is largely determined by the slop values. - * A different slop value is provided for each pool class (lifetime), - * and we also distinguish the first pool of a class from later ones. - * NOTE: the values given work fairly well on both 16- and 32-bit-int - * machines, but may be too small if longs are 64 bits or more. - */ - -static const size_t first_pool_slop[JPOOL_NUMPOOLS] = -{ - 1600, /* first PERMANENT pool */ - 16000 /* first IMAGE pool */ -}; - -static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = -{ - 0, /* additional PERMANENT pools */ - 5000 /* additional IMAGE pools */ -}; - -#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ - - -METHODDEF void * -alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "small" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr hdr_ptr, prev_hdr_ptr; - char * data_ptr; - size_t odd_bytes, min_request, slop; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) - out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* See if space is available in any existing pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - prev_hdr_ptr = NULL; - hdr_ptr = mem->small_list[pool_id]; - while (hdr_ptr != NULL) { - if (hdr_ptr->hdr.bytes_left >= sizeofobject) - break; /* found pool with enough space */ - prev_hdr_ptr = hdr_ptr; - hdr_ptr = hdr_ptr->hdr.next; - } - - /* Time to make a new pool? */ - if (hdr_ptr == NULL) { - /* min_request is what we need now, slop is what will be leftover */ - min_request = sizeofobject + SIZEOF(small_pool_hdr); - if (prev_hdr_ptr == NULL) /* first pool in class? */ - slop = first_pool_slop[pool_id]; - else - slop = extra_pool_slop[pool_id]; - /* Don't ask for more than MAX_ALLOC_CHUNK */ - if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) - slop = (size_t) (MAX_ALLOC_CHUNK-min_request); - /* Try to get space, if fail reduce slop and try again */ - for (;;) { - hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); - if (hdr_ptr != NULL) - break; - slop /= 2; - if (slop < MIN_SLOP) /* give up when it gets real small */ - out_of_memory(cinfo, 2); /* jpeg_get_small failed */ - } - mem->total_space_allocated += min_request + slop; - /* Success, initialize the new pool header and add to end of list */ - hdr_ptr->hdr.next = NULL; - hdr_ptr->hdr.bytes_used = 0; - hdr_ptr->hdr.bytes_left = sizeofobject + slop; - if (prev_hdr_ptr == NULL) /* first pool in class? */ - mem->small_list[pool_id] = hdr_ptr; - else - prev_hdr_ptr->hdr.next = hdr_ptr; - } - - /* OK, allocate the object from the current pool */ - data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ - data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ - hdr_ptr->hdr.bytes_used += sizeofobject; - hdr_ptr->hdr.bytes_left -= sizeofobject; - - return (void *) data_ptr; -} - - -/* - * Allocation of "large" objects. - * - * The external semantics of these are the same as "small" objects, - * except that FAR pointers are used on 80x86. However the pool - * management heuristics are quite different. We assume that each - * request is large enough that it may as well be passed directly to - * jpeg_get_large; the pool management just links everything together - * so that we can free it all on demand. - * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY - * structures. The routines that create these structures (see below) - * deliberately bunch rows together to ensure a large request size. - */ - -METHODDEF void FAR * -alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "large" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - large_pool_ptr hdr_ptr; - size_t odd_bytes; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) - out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* Always make a new pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + - SIZEOF(large_pool_hdr)); - if (hdr_ptr == NULL) - out_of_memory(cinfo, 4); /* jpeg_get_large failed */ - mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); - - /* Success, initialize the new pool header and add to list */ - hdr_ptr->hdr.next = mem->large_list[pool_id]; - /* We maintain space counts in each pool header for statistical purposes, - * even though they are not needed for allocation. - */ - hdr_ptr->hdr.bytes_used = sizeofobject; - hdr_ptr->hdr.bytes_left = 0; - mem->large_list[pool_id] = hdr_ptr; - - return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ -} - - -/* - * Creation of 2-D sample arrays. - * The pointers are in near heap, the samples themselves in FAR heap. - * - * To minimize allocation overhead and to allow I/O of large contiguous - * blocks, we allocate the sample rows in groups of as many rows as possible - * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. - * NB: the virtual array control routines, later in this file, know about - * this chunking of rows. The rowsperchunk value is left in the mem manager - * object so that it can be saved away if this sarray is the workspace for - * a virtual array. - */ - -METHODDEF JSAMPARRAY -alloc_sarray (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, JDIMENSION numrows) -/* Allocate a 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JSAMPARRAY result; - JSAMPROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) samplesperrow * SIZEOF(JSAMPLE)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JSAMPARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JSAMPROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JSAMPROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow - * SIZEOF(JSAMPLE))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += samplesperrow; - } - } - - return result; -} - - -/* - * Creation of 2-D coefficient-block arrays. - * This is essentially the same as the code for sample arrays, above. - */ - -METHODDEF JBLOCKARRAY -alloc_barray (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, JDIMENSION numrows) -/* Allocate a 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JBLOCKARRAY result; - JBLOCKROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) blocksperrow * SIZEOF(JBLOCK)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JBLOCKROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow - * SIZEOF(JBLOCK))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += blocksperrow; - } - } - - return result; -} - - -/* - * About virtual array management: - * - * The above "normal" array routines are only used to allocate strip buffers - * (as wide as the image, but just a few rows high). Full-image-sized buffers - * are handled as "virtual" arrays. The array is still accessed a strip at a - * time, but the memory manager must save the whole array for repeated - * accesses. The intended implementation is that there is a strip buffer in - * memory (as high as is possible given the desired memory limit), plus a - * backing file that holds the rest of the array. - * - * The request_virt_array routines are told the total size of the image and - * the maximum number of rows that will be accessed at once. The in-memory - * buffer must be at least as large as the maxaccess value. - * - * The request routines create control blocks but not the in-memory buffers. - * That is postponed until realize_virt_arrays is called. At that time the - * total amount of space needed is known (approximately, anyway), so free - * memory can be divided up fairly. - * - * The access_virt_array routines are responsible for making a specific strip - * area accessible (after reading or writing the backing file, if necessary). - * Note that the access routines are told whether the caller intends to modify - * the accessed strip; during a read-only pass this saves having to rewrite - * data to disk. The access routines are also responsible for pre-zeroing - * any newly accessed rows, if pre-zeroing was requested. - * - * In current usage, the access requests are usually for nonoverlapping - * strips; that is, successive access start_row numbers differ by exactly - * num_rows = maxaccess. This means we can get good performance with simple - * buffer dump/reload logic, by making the in-memory buffer be a multiple - * of the access height; then there will never be accesses across bufferload - * boundaries. The code will still work with overlapping access requests, - * but it doesn't handle bufferload overlaps very efficiently. - */ - - -METHODDEF jvirt_sarray_ptr -request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION samplesperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_sarray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_sarray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->samplesperrow = samplesperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ - mem->virt_sarray_list = result; - - return result; -} - - -METHODDEF jvirt_barray_ptr -request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION blocksperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_barray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_barray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->blocksperrow = blocksperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_barray_list; /* add to list of virtual arrays */ - mem->virt_barray_list = result; - - return result; -} - - -METHODDEF void -realize_virt_arrays (j_common_ptr cinfo) -/* Allocate the in-memory buffers for any unrealized virtual arrays */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - long space_per_minheight, maximum_space, avail_mem; - long minheights, max_minheights; - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - /* Compute the minimum space needed (maxaccess rows in each buffer) - * and the maximum space needed (full image height in each buffer). - * These may be of use to the system-dependent jpeg_mem_available routine. - */ - space_per_minheight = 0; - maximum_space = 0; - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) sptr->maxaccess * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - maximum_space += (long) sptr->rows_in_array * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - } - } - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) bptr->maxaccess * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - maximum_space += (long) bptr->rows_in_array * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - } - } - - if (space_per_minheight <= 0) - return; /* no unrealized arrays, no work */ - - /* Determine amount of memory to actually use; this is system-dependent. */ - avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, - mem->total_space_allocated); - - /* If the maximum space needed is available, make all the buffers full - * height; otherwise parcel it out with the same number of minheights - * in each buffer. - */ - if (avail_mem >= maximum_space) - max_minheights = 1000000000L; - else { - max_minheights = avail_mem / space_per_minheight; - /* If there doesn't seem to be enough space, try to get the minimum - * anyway. This allows a "stub" implementation of jpeg_mem_available(). - */ - if (max_minheights <= 0) - max_minheights = 1; - } - - /* Allocate the in-memory buffers and initialize backing store as needed. */ - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - sptr->rows_in_mem = sptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); - jpeg_open_backing_store(cinfo, & sptr->b_s_info, - (long) sptr->rows_in_array * - (long) sptr->samplesperrow * - (long) SIZEOF(JSAMPLE)); - sptr->b_s_open = TRUE; - } - sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, - sptr->samplesperrow, sptr->rows_in_mem); - sptr->rowsperchunk = mem->last_rowsperchunk; - sptr->cur_start_row = 0; - sptr->first_undef_row = 0; - sptr->dirty = FALSE; - } - } - - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - bptr->rows_in_mem = bptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); - jpeg_open_backing_store(cinfo, & bptr->b_s_info, - (long) bptr->rows_in_array * - (long) bptr->blocksperrow * - (long) SIZEOF(JBLOCK)); - bptr->b_s_open = TRUE; - } - bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, - bptr->blocksperrow, bptr->rows_in_mem); - bptr->rowsperchunk = mem->last_rowsperchunk; - bptr->cur_start_row = 0; - bptr->first_undef_row = 0; - bptr->dirty = FALSE; - } - } -} - - -LOCAL void -do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual sample array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -LOCAL void -do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual coefficient-block array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -METHODDEF JSAMPARRAY -access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual sample array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_sarray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_sarray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -METHODDEF JBLOCKARRAY -access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual block array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_barray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_barray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -/* - * Release all objects belonging to a specified pool. - */ - -METHODDEF void -free_pool (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - size_t space_freed; - - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - -#ifdef MEM_STATS - if (cinfo->err->trace_level > 1) - print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ -#endif - - /* If freeing IMAGE pool, close any virtual arrays first */ - if (pool_id == JPOOL_IMAGE) { - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->b_s_open) { /* there may be no backing store */ - sptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); - } - } - mem->virt_sarray_list = NULL; - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->b_s_open) { /* there may be no backing store */ - bptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); - } - } - mem->virt_barray_list = NULL; - } - - /* Release large objects */ - lhdr_ptr = mem->large_list[pool_id]; - mem->large_list[pool_id] = NULL; - - while (lhdr_ptr != NULL) { - large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; - space_freed = lhdr_ptr->hdr.bytes_used + - lhdr_ptr->hdr.bytes_left + - SIZEOF(large_pool_hdr); - jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); - mem->total_space_allocated -= space_freed; - lhdr_ptr = next_lhdr_ptr; - } - - /* Release small objects */ - shdr_ptr = mem->small_list[pool_id]; - mem->small_list[pool_id] = NULL; - - while (shdr_ptr != NULL) { - small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; - space_freed = shdr_ptr->hdr.bytes_used + - shdr_ptr->hdr.bytes_left + - SIZEOF(small_pool_hdr); - jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); - mem->total_space_allocated -= space_freed; - shdr_ptr = next_shdr_ptr; - } -} - - -/* - * Close up shop entirely. - * Note that this cannot be called unless cinfo->mem is non-NULL. - */ - -METHODDEF void -self_destruct (j_common_ptr cinfo) -{ - int pool; - - /* Close all backing store, release all memory. - * Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - free_pool(cinfo, pool); - } - - /* Release the memory manager control block too. */ - jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); - cinfo->mem = NULL; /* ensures I will be called only once */ - - jpeg_mem_term(cinfo); /* system-dependent cleanup */ -} - - -/* - * Memory manager initialization. - * When this is called, only the error manager pointer is valid in cinfo! - */ - -GLOBAL void -jinit_memory_mgr (j_common_ptr cinfo) -{ - my_mem_ptr mem; - long max_to_use; - int pool; - size_t test_mac; - - cinfo->mem = NULL; /* for safety if init fails */ - - /* Check for configuration errors. - * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably - * doesn't reflect any real hardware alignment requirement. - * The test is a little tricky: for X>0, X and X-1 have no one-bits - * in common if and only if X is a power of 2, ie has only one one-bit. - * Some compilers may give an "unreachable code" warning here; ignore it. - */ - if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) - ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); - /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be - * a multiple of SIZEOF(ALIGN_TYPE). - * Again, an "unreachable code" warning may be ignored here. - * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. - */ - test_mac = (size_t) MAX_ALLOC_CHUNK; - if ((long) test_mac != MAX_ALLOC_CHUNK || - (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - - max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ - - /* Attempt to allocate memory manager's control block */ - mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); - - if (mem == NULL) { - jpeg_mem_term(cinfo); /* system-dependent cleanup */ - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); - } - - /* OK, fill in the method pointers */ - mem->pub.alloc_small = alloc_small; - mem->pub.alloc_large = alloc_large; - mem->pub.alloc_sarray = alloc_sarray; - mem->pub.alloc_barray = alloc_barray; - mem->pub.request_virt_sarray = request_virt_sarray; - mem->pub.request_virt_barray = request_virt_barray; - mem->pub.realize_virt_arrays = realize_virt_arrays; - mem->pub.access_virt_sarray = access_virt_sarray; - mem->pub.access_virt_barray = access_virt_barray; - mem->pub.free_pool = free_pool; - mem->pub.self_destruct = self_destruct; - - /* Initialize working state */ - mem->pub.max_memory_to_use = max_to_use; - - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - mem->small_list[pool] = NULL; - mem->large_list[pool] = NULL; - } - mem->virt_sarray_list = NULL; - mem->virt_barray_list = NULL; - - mem->total_space_allocated = SIZEOF(my_memory_mgr); - - /* Declare ourselves open for business */ - cinfo->mem = & mem->pub; - - /* Check for an environment variable JPEGMEM; if found, override the - * default max_memory setting from jpeg_mem_init. Note that the - * surrounding application may again override this value. - * If your system doesn't support getenv(), define NO_GETENV to disable - * this feature. - */ -#ifndef NO_GETENV - { char * memenv; - - if ((memenv = getenv("JPEGMEM")) != NULL) { - char ch = 'x'; - - if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { - if (ch == 'm' || ch == 'M') - max_to_use *= 1000L; - mem->pub.max_memory_to_use = max_to_use * 1000L; - } - } - } -#endif - -} +/* + * jmemmgr.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the JPEG system-independent memory management + * routines. This code is usable across a wide variety of machines; most + * of the system dependencies have been isolated in a separate file. + * The major functions provided here are: + * * pool-based allocation and freeing of memory; + * * policy decisions about how to divide available memory among the + * virtual arrays; + * * control logic for swapping virtual arrays between main memory and + * backing storage. + * The separate system-dependent file provides the actual backing-storage + * access code, and it contains the policy decision about how much total + * main memory to use. + * This file is system-dependent in the sense that some of its functions + * are unnecessary in some systems. For example, if there is enough virtual + * memory so that backing storage will never be used, much of the virtual + * array control logic could be removed. (Of course, if you have that much + * memory then you shouldn't care about a little bit of unused code...) + */ + +#define JPEG_INTERNALS +#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef NO_GETENV +#ifndef HAVE_STDLIB_H /* should declare getenv() */ +extern char * getenv JPP((const char * name)); +#endif +#endif + + +/* + * Some important notes: + * The allocation routines provided here must never return NULL. + * They should exit to error_exit if unsuccessful. + * + * It's not a good idea to try to merge the sarray and barray routines, + * even though they are textually almost the same, because samples are + * usually stored as bytes while coefficients are shorts or ints. Thus, + * in machines where byte pointers have a different representation from + * word pointers, the resulting machine code could not be the same. + */ + + +/* + * Many machines require storage alignment: longs must start on 4-byte + * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() + * always returns pointers that are multiples of the worst-case alignment + * requirement, and we had better do so too. + * There isn't any really portable way to determine the worst-case alignment + * requirement. This module assumes that the alignment requirement is + * multiples of sizeof(ALIGN_TYPE). + * By default, we define ALIGN_TYPE as double. This is necessary on some + * workstations (where doubles really do need 8-byte alignment) and will work + * fine on nearly everything. If your machine has lesser alignment needs, + * you can save a few bytes by making ALIGN_TYPE smaller. + * The only place I know of where this will NOT work is certain Macintosh + * 680x0 compilers that define double as a 10-byte IEEE extended float. + * Doing 10-byte alignment is counterproductive because longwords won't be + * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have + * such a compiler. + */ + +#ifndef ALIGN_TYPE /* so can override from jconfig.h */ +#define ALIGN_TYPE double +#endif + + +/* + * We allocate objects from "pools", where each pool is gotten with a single + * request to jpeg_get_small() or jpeg_get_large(). There is no per-object + * overhead within a pool, except for alignment padding. Each pool has a + * header with a link to the next pool of the same class. + * Small and large pool headers are identical except that the latter's + * link pointer must be FAR on 80x86 machines. + * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE + * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple + * of the alignment requirement of ALIGN_TYPE. + */ + +typedef union small_pool_struct * small_pool_ptr; + +typedef union small_pool_struct { + struct { + small_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} small_pool_hdr; + +typedef union large_pool_struct FAR * large_pool_ptr; + +typedef union large_pool_struct { + struct { + large_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} large_pool_hdr; + + +/* + * Here is the full definition of a memory manager object. + */ + +typedef struct { + struct jpeg_memory_mgr pub; /* public fields */ + + /* Each pool identifier (lifetime class) names a linked list of pools. */ + small_pool_ptr small_list[JPOOL_NUMPOOLS]; + large_pool_ptr large_list[JPOOL_NUMPOOLS]; + + /* Since we only have one lifetime class of virtual arrays, only one + * linked list is necessary (for each datatype). Note that the virtual + * array control blocks being linked together are actually stored somewhere + * in the small-pool list. + */ + jvirt_sarray_ptr virt_sarray_list; + jvirt_barray_ptr virt_barray_list; + + /* This counts total space obtained from jpeg_get_small/large */ + long total_space_allocated; + + /* alloc_sarray and alloc_barray set this value for use by virtual + * array routines. + */ + JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ +} my_memory_mgr; + +typedef my_memory_mgr * my_mem_ptr; + + +/* + * The control blocks for virtual arrays. + * Note that these blocks are allocated in the "small" pool area. + * System-dependent info for the associated backing store (if any) is hidden + * inside the backing_store_info struct. + */ + +struct jvirt_sarray_control { + JSAMPARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_sarray_ptr next; /* link to next virtual sarray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + +struct jvirt_barray_control { + JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_barray_ptr next; /* link to next virtual barray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + + +#ifdef MEM_STATS /* optional extra stuff for statistics */ + +LOCAL void +print_mem_stats (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + + /* Since this is only a debugging stub, we can cheat a little by using + * fprintf directly rather than going through the trace message code. + * This is helpful because message parm array can't handle longs. + */ + fprintf(stderr, "Freeing pool %d, total space = %ld\n", + pool_id, mem->total_space_allocated); + + for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; + lhdr_ptr = lhdr_ptr->hdr.next) { + fprintf(stderr, " Large chunk used %ld\n", + (long) lhdr_ptr->hdr.bytes_used); + } + + for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; + shdr_ptr = shdr_ptr->hdr.next) { + fprintf(stderr, " Small chunk used %ld free %ld\n", + (long) shdr_ptr->hdr.bytes_used, + (long) shdr_ptr->hdr.bytes_left); + } +} + +#endif /* MEM_STATS */ + + +LOCAL void +out_of_memory (j_common_ptr cinfo, int which) +/* Report an out-of-memory error and stop execution */ +/* If we compiled MEM_STATS support, report alloc requests before dying */ +{ +#ifdef MEM_STATS + cinfo->err->trace_level = 2; /* force self_destruct to report stats */ +#endif + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); +} + + +/* + * Allocation of "small" objects. + * + * For these, we use pooled storage. When a new pool must be created, + * we try to get enough space for the current request plus a "slop" factor, + * where the slop will be the amount of leftover space in the new pool. + * The speed vs. space tradeoff is largely determined by the slop values. + * A different slop value is provided for each pool class (lifetime), + * and we also distinguish the first pool of a class from later ones. + * NOTE: the values given work fairly well on both 16- and 32-bit-int + * machines, but may be too small if longs are 64 bits or more. + */ + +static const size_t first_pool_slop[JPOOL_NUMPOOLS] = +{ + 1600, /* first PERMANENT pool */ + 16000 /* first IMAGE pool */ +}; + +static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = +{ + 0, /* additional PERMANENT pools */ + 5000 /* additional IMAGE pools */ +}; + +#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ + + +METHODDEF void * +alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "small" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr hdr_ptr, prev_hdr_ptr; + char * data_ptr; + size_t odd_bytes, min_request, slop; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) + out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* See if space is available in any existing pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + prev_hdr_ptr = NULL; + hdr_ptr = mem->small_list[pool_id]; + while (hdr_ptr != NULL) { + if (hdr_ptr->hdr.bytes_left >= sizeofobject) + break; /* found pool with enough space */ + prev_hdr_ptr = hdr_ptr; + hdr_ptr = hdr_ptr->hdr.next; + } + + /* Time to make a new pool? */ + if (hdr_ptr == NULL) { + /* min_request is what we need now, slop is what will be leftover */ + min_request = sizeofobject + SIZEOF(small_pool_hdr); + if (prev_hdr_ptr == NULL) /* first pool in class? */ + slop = first_pool_slop[pool_id]; + else + slop = extra_pool_slop[pool_id]; + /* Don't ask for more than MAX_ALLOC_CHUNK */ + if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) + slop = (size_t) (MAX_ALLOC_CHUNK-min_request); + /* Try to get space, if fail reduce slop and try again */ + for (;;) { + hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); + if (hdr_ptr != NULL) + break; + slop /= 2; + if (slop < MIN_SLOP) /* give up when it gets real small */ + out_of_memory(cinfo, 2); /* jpeg_get_small failed */ + } + mem->total_space_allocated += min_request + slop; + /* Success, initialize the new pool header and add to end of list */ + hdr_ptr->hdr.next = NULL; + hdr_ptr->hdr.bytes_used = 0; + hdr_ptr->hdr.bytes_left = sizeofobject + slop; + if (prev_hdr_ptr == NULL) /* first pool in class? */ + mem->small_list[pool_id] = hdr_ptr; + else + prev_hdr_ptr->hdr.next = hdr_ptr; + } + + /* OK, allocate the object from the current pool */ + data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ + data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ + hdr_ptr->hdr.bytes_used += sizeofobject; + hdr_ptr->hdr.bytes_left -= sizeofobject; + + return (void *) data_ptr; +} + + +/* + * Allocation of "large" objects. + * + * The external semantics of these are the same as "small" objects, + * except that FAR pointers are used on 80x86. However the pool + * management heuristics are quite different. We assume that each + * request is large enough that it may as well be passed directly to + * jpeg_get_large; the pool management just links everything together + * so that we can free it all on demand. + * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY + * structures. The routines that create these structures (see below) + * deliberately bunch rows together to ensure a large request size. + */ + +METHODDEF void FAR * +alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "large" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + large_pool_ptr hdr_ptr; + size_t odd_bytes; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) + out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* Always make a new pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + + SIZEOF(large_pool_hdr)); + if (hdr_ptr == NULL) + out_of_memory(cinfo, 4); /* jpeg_get_large failed */ + mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); + + /* Success, initialize the new pool header and add to list */ + hdr_ptr->hdr.next = mem->large_list[pool_id]; + /* We maintain space counts in each pool header for statistical purposes, + * even though they are not needed for allocation. + */ + hdr_ptr->hdr.bytes_used = sizeofobject; + hdr_ptr->hdr.bytes_left = 0; + mem->large_list[pool_id] = hdr_ptr; + + return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ +} + + +/* + * Creation of 2-D sample arrays. + * The pointers are in near heap, the samples themselves in FAR heap. + * + * To minimize allocation overhead and to allow I/O of large contiguous + * blocks, we allocate the sample rows in groups of as many rows as possible + * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. + * NB: the virtual array control routines, later in this file, know about + * this chunking of rows. The rowsperchunk value is left in the mem manager + * object so that it can be saved away if this sarray is the workspace for + * a virtual array. + */ + +METHODDEF JSAMPARRAY +alloc_sarray (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, JDIMENSION numrows) +/* Allocate a 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JSAMPARRAY result; + JSAMPROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) samplesperrow * SIZEOF(JSAMPLE)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JSAMPARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JSAMPROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JSAMPROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow + * SIZEOF(JSAMPLE))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += samplesperrow; + } + } + + return result; +} + + +/* + * Creation of 2-D coefficient-block arrays. + * This is essentially the same as the code for sample arrays, above. + */ + +METHODDEF JBLOCKARRAY +alloc_barray (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, JDIMENSION numrows) +/* Allocate a 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JBLOCKARRAY result; + JBLOCKROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) blocksperrow * SIZEOF(JBLOCK)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JBLOCKROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow + * SIZEOF(JBLOCK))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += blocksperrow; + } + } + + return result; +} + + +/* + * About virtual array management: + * + * The above "normal" array routines are only used to allocate strip buffers + * (as wide as the image, but just a few rows high). Full-image-sized buffers + * are handled as "virtual" arrays. The array is still accessed a strip at a + * time, but the memory manager must save the whole array for repeated + * accesses. The intended implementation is that there is a strip buffer in + * memory (as high as is possible given the desired memory limit), plus a + * backing file that holds the rest of the array. + * + * The request_virt_array routines are told the total size of the image and + * the maximum number of rows that will be accessed at once. The in-memory + * buffer must be at least as large as the maxaccess value. + * + * The request routines create control blocks but not the in-memory buffers. + * That is postponed until realize_virt_arrays is called. At that time the + * total amount of space needed is known (approximately, anyway), so free + * memory can be divided up fairly. + * + * The access_virt_array routines are responsible for making a specific strip + * area accessible (after reading or writing the backing file, if necessary). + * Note that the access routines are told whether the caller intends to modify + * the accessed strip; during a read-only pass this saves having to rewrite + * data to disk. The access routines are also responsible for pre-zeroing + * any newly accessed rows, if pre-zeroing was requested. + * + * In current usage, the access requests are usually for nonoverlapping + * strips; that is, successive access start_row numbers differ by exactly + * num_rows = maxaccess. This means we can get good performance with simple + * buffer dump/reload logic, by making the in-memory buffer be a multiple + * of the access height; then there will never be accesses across bufferload + * boundaries. The code will still work with overlapping access requests, + * but it doesn't handle bufferload overlaps very efficiently. + */ + + +METHODDEF jvirt_sarray_ptr +request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION samplesperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_sarray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_sarray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->samplesperrow = samplesperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ + mem->virt_sarray_list = result; + + return result; +} + + +METHODDEF jvirt_barray_ptr +request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_barray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_barray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->blocksperrow = blocksperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_barray_list; /* add to list of virtual arrays */ + mem->virt_barray_list = result; + + return result; +} + + +METHODDEF void +realize_virt_arrays (j_common_ptr cinfo) +/* Allocate the in-memory buffers for any unrealized virtual arrays */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + long space_per_minheight, maximum_space, avail_mem; + long minheights, max_minheights; + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + /* Compute the minimum space needed (maxaccess rows in each buffer) + * and the maximum space needed (full image height in each buffer). + * These may be of use to the system-dependent jpeg_mem_available routine. + */ + space_per_minheight = 0; + maximum_space = 0; + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) sptr->maxaccess * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + maximum_space += (long) sptr->rows_in_array * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + } + } + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) bptr->maxaccess * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + maximum_space += (long) bptr->rows_in_array * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + } + } + + if (space_per_minheight <= 0) + return; /* no unrealized arrays, no work */ + + /* Determine amount of memory to actually use; this is system-dependent. */ + avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, + mem->total_space_allocated); + + /* If the maximum space needed is available, make all the buffers full + * height; otherwise parcel it out with the same number of minheights + * in each buffer. + */ + if (avail_mem >= maximum_space) + max_minheights = 1000000000L; + else { + max_minheights = avail_mem / space_per_minheight; + /* If there doesn't seem to be enough space, try to get the minimum + * anyway. This allows a "stub" implementation of jpeg_mem_available(). + */ + if (max_minheights <= 0) + max_minheights = 1; + } + + /* Allocate the in-memory buffers and initialize backing store as needed. */ + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + sptr->rows_in_mem = sptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); + jpeg_open_backing_store(cinfo, & sptr->b_s_info, + (long) sptr->rows_in_array * + (long) sptr->samplesperrow * + (long) SIZEOF(JSAMPLE)); + sptr->b_s_open = TRUE; + } + sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, + sptr->samplesperrow, sptr->rows_in_mem); + sptr->rowsperchunk = mem->last_rowsperchunk; + sptr->cur_start_row = 0; + sptr->first_undef_row = 0; + sptr->dirty = FALSE; + } + } + + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + bptr->rows_in_mem = bptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); + jpeg_open_backing_store(cinfo, & bptr->b_s_info, + (long) bptr->rows_in_array * + (long) bptr->blocksperrow * + (long) SIZEOF(JBLOCK)); + bptr->b_s_open = TRUE; + } + bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, + bptr->blocksperrow, bptr->rows_in_mem); + bptr->rowsperchunk = mem->last_rowsperchunk; + bptr->cur_start_row = 0; + bptr->first_undef_row = 0; + bptr->dirty = FALSE; + } + } +} + + +LOCAL void +do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual sample array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +LOCAL void +do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual coefficient-block array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +METHODDEF JSAMPARRAY +access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual sample array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_sarray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_sarray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +METHODDEF JBLOCKARRAY +access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual block array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_barray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_barray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +/* + * Release all objects belonging to a specified pool. + */ + +METHODDEF void +free_pool (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + size_t space_freed; + + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + +#ifdef MEM_STATS + if (cinfo->err->trace_level > 1) + print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ +#endif + + /* If freeing IMAGE pool, close any virtual arrays first */ + if (pool_id == JPOOL_IMAGE) { + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->b_s_open) { /* there may be no backing store */ + sptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); + } + } + mem->virt_sarray_list = NULL; + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->b_s_open) { /* there may be no backing store */ + bptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); + } + } + mem->virt_barray_list = NULL; + } + + /* Release large objects */ + lhdr_ptr = mem->large_list[pool_id]; + mem->large_list[pool_id] = NULL; + + while (lhdr_ptr != NULL) { + large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; + space_freed = lhdr_ptr->hdr.bytes_used + + lhdr_ptr->hdr.bytes_left + + SIZEOF(large_pool_hdr); + jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + lhdr_ptr = next_lhdr_ptr; + } + + /* Release small objects */ + shdr_ptr = mem->small_list[pool_id]; + mem->small_list[pool_id] = NULL; + + while (shdr_ptr != NULL) { + small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; + space_freed = shdr_ptr->hdr.bytes_used + + shdr_ptr->hdr.bytes_left + + SIZEOF(small_pool_hdr); + jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + shdr_ptr = next_shdr_ptr; + } +} + + +/* + * Close up shop entirely. + * Note that this cannot be called unless cinfo->mem is non-NULL. + */ + +METHODDEF void +self_destruct (j_common_ptr cinfo) +{ + int pool; + + /* Close all backing store, release all memory. + * Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + free_pool(cinfo, pool); + } + + /* Release the memory manager control block too. */ + jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); + cinfo->mem = NULL; /* ensures I will be called only once */ + + jpeg_mem_term(cinfo); /* system-dependent cleanup */ +} + + +/* + * Memory manager initialization. + * When this is called, only the error manager pointer is valid in cinfo! + */ + +GLOBAL void +jinit_memory_mgr (j_common_ptr cinfo) +{ + my_mem_ptr mem; + long max_to_use; + int pool; + size_t test_mac; + + cinfo->mem = NULL; /* for safety if init fails */ + + /* Check for configuration errors. + * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably + * doesn't reflect any real hardware alignment requirement. + * The test is a little tricky: for X>0, X and X-1 have no one-bits + * in common if and only if X is a power of 2, ie has only one one-bit. + * Some compilers may give an "unreachable code" warning here; ignore it. + */ + if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) + ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); + /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be + * a multiple of SIZEOF(ALIGN_TYPE). + * Again, an "unreachable code" warning may be ignored here. + * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. + */ + test_mac = (size_t) MAX_ALLOC_CHUNK; + if ((long) test_mac != MAX_ALLOC_CHUNK || + (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + + max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ + + /* Attempt to allocate memory manager's control block */ + mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); + + if (mem == NULL) { + jpeg_mem_term(cinfo); /* system-dependent cleanup */ + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); + } + + /* OK, fill in the method pointers */ + mem->pub.alloc_small = alloc_small; + mem->pub.alloc_large = alloc_large; + mem->pub.alloc_sarray = alloc_sarray; + mem->pub.alloc_barray = alloc_barray; + mem->pub.request_virt_sarray = request_virt_sarray; + mem->pub.request_virt_barray = request_virt_barray; + mem->pub.realize_virt_arrays = realize_virt_arrays; + mem->pub.access_virt_sarray = access_virt_sarray; + mem->pub.access_virt_barray = access_virt_barray; + mem->pub.free_pool = free_pool; + mem->pub.self_destruct = self_destruct; + + /* Initialize working state */ + mem->pub.max_memory_to_use = max_to_use; + + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + mem->small_list[pool] = NULL; + mem->large_list[pool] = NULL; + } + mem->virt_sarray_list = NULL; + mem->virt_barray_list = NULL; + + mem->total_space_allocated = SIZEOF(my_memory_mgr); + + /* Declare ourselves open for business */ + cinfo->mem = & mem->pub; + + /* Check for an environment variable JPEGMEM; if found, override the + * default max_memory setting from jpeg_mem_init. Note that the + * surrounding application may again override this value. + * If your system doesn't support getenv(), define NO_GETENV to disable + * this feature. + */ +#ifndef NO_GETENV + { char * memenv; + + if ((memenv = getenv("JPEGMEM")) != NULL) { + char ch = 'x'; + + if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { + if (ch == 'm' || ch == 'M') + max_to_use *= 1000L; + mem->pub.max_memory_to_use = max_to_use * 1000L; + } + } + } +#endif + +} diff --git a/libs/jpeg6/jmemnobs.cpp b/libs/jpeg6/jmemnobs.cpp index e63e5e4..9bafed5 100755 --- a/libs/jpeg6/jmemnobs.cpp +++ b/libs/jpeg6/jmemnobs.cpp @@ -1,103 +1,103 @@ -/* - * jmemnobs.c - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a really simple implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that no backing-store files are needed: all required space - * can be obtained from ri.Malloc(). - * This is very portable in the sense that it'll compile on almost anything, - * but you'd better have lots of main memory (or virtual memory) if you want - * to process big images. - * Note that the max_memory_to_use option is ignored by this implementation. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -/* - * Memory allocation and ri.Freeing are controlled by the regular library - * routines ri.Malloc() and ri.Free(). - */ - -GLOBAL void * -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL void FAR * -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * Here we always say, "we got all you want bud!" - */ - -GLOBAL long -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return max_bytes_needed; -} - - -/* - * Backing store (temporary file) management. - * Since jpeg_mem_available always promised the moon, - * this should never be called and we can just error out. - */ - -GLOBAL void -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - ERREXIT(cinfo, JERR_NO_BACKING_STORE); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. Here, there isn't any. - */ - -GLOBAL long -jpeg_mem_init (j_common_ptr cinfo) -{ - return 0; /* just set max_memory_to_use to 0 */ -} - -GLOBAL void -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} +/* + * jmemnobs.c + * + * Copyright (C) 1992-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a really simple implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that no backing-store files are needed: all required space + * can be obtained from ri.Malloc(). + * This is very portable in the sense that it'll compile on almost anything, + * but you'd better have lots of main memory (or virtual memory) if you want + * to process big images. + * Note that the max_memory_to_use option is ignored by this implementation. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +/* + * Memory allocation and ri.Freeing are controlled by the regular library + * routines ri.Malloc() and ri.Free(). + */ + +GLOBAL void * +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL void +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL void FAR * +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL void +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * Here we always say, "we got all you want bud!" + */ + +GLOBAL long +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return max_bytes_needed; +} + + +/* + * Backing store (temporary file) management. + * Since jpeg_mem_available always promised the moon, + * this should never be called and we can just error out. + */ + +GLOBAL void +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + ERREXIT(cinfo, JERR_NO_BACKING_STORE); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. Here, there isn't any. + */ + +GLOBAL long +jpeg_mem_init (j_common_ptr cinfo) +{ + return 0; /* just set max_memory_to_use to 0 */ +} + +GLOBAL void +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/libs/jpeg6/jmemsys.h b/libs/jpeg6/jmemsys.h index 0c7d7c1..033d29a 100755 --- a/libs/jpeg6/jmemsys.h +++ b/libs/jpeg6/jmemsys.h @@ -1,182 +1,182 @@ -/* - * jmemsys.h - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file defines the interface between the system-independent - * and system-dependent portions of the JPEG memory manager. No other - * modules need include it. (The system-independent portion is jmemmgr.c; - * there are several different versions of the system-dependent portion.) - * - * This file works as-is for the system-dependent memory managers supplied - * in the IJG distribution. You may need to modify it if you write a - * custom memory manager. If system-dependent changes are needed in - * this file, the best method is to #ifdef them based on a configuration - * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR. - */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_get_small jGetSmall -#define jpeg_free_small jFreeSmall -#define jpeg_get_large jGetLarge -#define jpeg_free_large jFreeLarge -#define jpeg_mem_available jMemAvail -#define jpeg_open_backing_store jOpenBackStore -#define jpeg_mem_init jMemInit -#define jpeg_mem_term jMemTerm -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * These two functions are used to allocate and release small chunks of - * memory. (Typically the total amount requested through jpeg_get_small is - * no more than 20K or so; this will be requested in chunks of a few K each.) - * Behavior should be the same as for the standard library functions malloc - * and free; in particular, jpeg_get_small must return NULL on failure. - * On most systems, these ARE malloc and free. jpeg_free_small is passed the - * size of the object being freed, just in case it's needed. - * On an 80x86 machine using small-data memory model, these manage near heap. - */ - -EXTERN void * jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); -EXTERN void jpeg_free_small JPP((j_common_ptr cinfo, void * object, - size_t sizeofobject)); - -/* - * These two functions are used to allocate and release large chunks of - * memory (up to the total free space designated by jpeg_mem_available). - * The interface is the same as above, except that on an 80x86 machine, - * far pointers are used. On most other machines these are identical to - * the jpeg_get/free_small routines; but we keep them separate anyway, - * in case a different allocation strategy is desirable for large chunks. - */ - -EXTERN void FAR * jpeg_get_large JPP((j_common_ptr cinfo,size_t sizeofobject)); -EXTERN void jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, - size_t sizeofobject)); - -/* - * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may - * be requested in a single call to jpeg_get_large (and jpeg_get_small for that - * matter, but that case should never come into play). This macro is needed - * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. - * On those machines, we expect that jconfig.h will provide a proper value. - * On machines with 32-bit flat address spaces, any large constant may be used. - * - * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type - * size_t and will be a multiple of sizeof(align_type). - */ - -#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ -#define MAX_ALLOC_CHUNK 1000000000L -#endif - -/* - * This routine computes the total space still available for allocation by - * jpeg_get_large. If more space than this is needed, backing store will be - * used. NOTE: any memory already allocated must not be counted. - * - * There is a minimum space requirement, corresponding to the minimum - * feasible buffer sizes; jmemmgr.c will request that much space even if - * jpeg_mem_available returns zero. The maximum space needed, enough to hold - * all working storage in memory, is also passed in case it is useful. - * Finally, the total space already allocated is passed. If no better - * method is available, cinfo->mem->max_memory_to_use - already_allocated - * is often a suitable calculation. - * - * It is OK for jpeg_mem_available to underestimate the space available - * (that'll just lead to more backing-store access than is really necessary). - * However, an overestimate will lead to failure. Hence it's wise to subtract - * a slop factor from the true available space. 5% should be enough. - * - * On machines with lots of virtual memory, any large constant may be returned. - * Conversely, zero may be returned to always use the minimum amount of memory. - */ - -EXTERN long jpeg_mem_available JPP((j_common_ptr cinfo, - long min_bytes_needed, - long max_bytes_needed, - long already_allocated)); - - -/* - * This structure holds whatever state is needed to access a single - * backing-store object. The read/write/close method pointers are called - * by jmemmgr.c to manipulate the backing-store object; all other fields - * are private to the system-dependent backing store routines. - */ - -#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ - -#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ - -typedef unsigned short XMSH; /* type of extended-memory handles */ -typedef unsigned short EMSH; /* type of expanded-memory handles */ - -typedef union { - short file_handle; /* DOS file handle if it's a temp file */ - XMSH xms_handle; /* handle if it's a chunk of XMS */ - EMSH ems_handle; /* handle if it's a chunk of EMS */ -} handle_union; - -#endif /* USE_MSDOS_MEMMGR */ - -typedef struct backing_store_struct * backing_store_ptr; - -typedef struct backing_store_struct { - /* Methods for reading/writing/closing this backing-store object */ - JMETHOD(void, read_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, write_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, close_backing_store, (j_common_ptr cinfo, - backing_store_ptr info)); - - /* Private fields for system-dependent backing-store management */ -#ifdef USE_MSDOS_MEMMGR - /* For the MS-DOS manager (jmemdos.c), we need: */ - handle_union handle; /* reference to backing-store storage object */ - char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ -#else - /* For a typical implementation with temp files, we need: */ - FILE * temp_file; /* stdio reference to temp file */ - char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ -#endif -} backing_store_info; - -/* - * Initial opening of a backing-store object. This must fill in the - * read/write/close pointers in the object. The read/write routines - * may take an error exit if the specified maximum file size is exceeded. - * (If jpeg_mem_available always returns a large value, this routine can - * just take an error exit.) - */ - -EXTERN void jpeg_open_backing_store JPP((j_common_ptr cinfo, - backing_store_ptr info, - long total_bytes_needed)); - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. jpeg_mem_init will be called before anything is - * allocated (and, therefore, nothing in cinfo is of use except the error - * manager pointer). It should return a suitable default value for - * max_memory_to_use; this may subsequently be overridden by the surrounding - * application. (Note that max_memory_to_use is only important if - * jpeg_mem_available chooses to consult it ... no one else will.) - * jpeg_mem_term may assume that all requested memory has been freed and that - * all opened backing-store objects have been closed. - */ - -EXTERN long jpeg_mem_init JPP((j_common_ptr cinfo)); -EXTERN void jpeg_mem_term JPP((j_common_ptr cinfo)); +/* + * jmemsys.h + * + * Copyright (C) 1992-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file defines the interface between the system-independent + * and system-dependent portions of the JPEG memory manager. No other + * modules need include it. (The system-independent portion is jmemmgr.c; + * there are several different versions of the system-dependent portion.) + * + * This file works as-is for the system-dependent memory managers supplied + * in the IJG distribution. You may need to modify it if you write a + * custom memory manager. If system-dependent changes are needed in + * this file, the best method is to #ifdef them based on a configuration + * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_get_small jGetSmall +#define jpeg_free_small jFreeSmall +#define jpeg_get_large jGetLarge +#define jpeg_free_large jFreeLarge +#define jpeg_mem_available jMemAvail +#define jpeg_open_backing_store jOpenBackStore +#define jpeg_mem_init jMemInit +#define jpeg_mem_term jMemTerm +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * These two functions are used to allocate and release small chunks of + * memory. (Typically the total amount requested through jpeg_get_small is + * no more than 20K or so; this will be requested in chunks of a few K each.) + * Behavior should be the same as for the standard library functions malloc + * and free; in particular, jpeg_get_small must return NULL on failure. + * On most systems, these ARE malloc and free. jpeg_free_small is passed the + * size of the object being freed, just in case it's needed. + * On an 80x86 machine using small-data memory model, these manage near heap. + */ + +EXTERN void * jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); +EXTERN void jpeg_free_small JPP((j_common_ptr cinfo, void * object, + size_t sizeofobject)); + +/* + * These two functions are used to allocate and release large chunks of + * memory (up to the total free space designated by jpeg_mem_available). + * The interface is the same as above, except that on an 80x86 machine, + * far pointers are used. On most other machines these are identical to + * the jpeg_get/free_small routines; but we keep them separate anyway, + * in case a different allocation strategy is desirable for large chunks. + */ + +EXTERN void FAR * jpeg_get_large JPP((j_common_ptr cinfo,size_t sizeofobject)); +EXTERN void jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, + size_t sizeofobject)); + +/* + * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may + * be requested in a single call to jpeg_get_large (and jpeg_get_small for that + * matter, but that case should never come into play). This macro is needed + * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. + * On those machines, we expect that jconfig.h will provide a proper value. + * On machines with 32-bit flat address spaces, any large constant may be used. + * + * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type + * size_t and will be a multiple of sizeof(align_type). + */ + +#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ +#define MAX_ALLOC_CHUNK 1000000000L +#endif + +/* + * This routine computes the total space still available for allocation by + * jpeg_get_large. If more space than this is needed, backing store will be + * used. NOTE: any memory already allocated must not be counted. + * + * There is a minimum space requirement, corresponding to the minimum + * feasible buffer sizes; jmemmgr.c will request that much space even if + * jpeg_mem_available returns zero. The maximum space needed, enough to hold + * all working storage in memory, is also passed in case it is useful. + * Finally, the total space already allocated is passed. If no better + * method is available, cinfo->mem->max_memory_to_use - already_allocated + * is often a suitable calculation. + * + * It is OK for jpeg_mem_available to underestimate the space available + * (that'll just lead to more backing-store access than is really necessary). + * However, an overestimate will lead to failure. Hence it's wise to subtract + * a slop factor from the true available space. 5% should be enough. + * + * On machines with lots of virtual memory, any large constant may be returned. + * Conversely, zero may be returned to always use the minimum amount of memory. + */ + +EXTERN long jpeg_mem_available JPP((j_common_ptr cinfo, + long min_bytes_needed, + long max_bytes_needed, + long already_allocated)); + + +/* + * This structure holds whatever state is needed to access a single + * backing-store object. The read/write/close method pointers are called + * by jmemmgr.c to manipulate the backing-store object; all other fields + * are private to the system-dependent backing store routines. + */ + +#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ + +#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ + +typedef unsigned short XMSH; /* type of extended-memory handles */ +typedef unsigned short EMSH; /* type of expanded-memory handles */ + +typedef union { + short file_handle; /* DOS file handle if it's a temp file */ + XMSH xms_handle; /* handle if it's a chunk of XMS */ + EMSH ems_handle; /* handle if it's a chunk of EMS */ +} handle_union; + +#endif /* USE_MSDOS_MEMMGR */ + +typedef struct backing_store_struct * backing_store_ptr; + +typedef struct backing_store_struct { + /* Methods for reading/writing/closing this backing-store object */ + JMETHOD(void, read_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, write_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, close_backing_store, (j_common_ptr cinfo, + backing_store_ptr info)); + + /* Private fields for system-dependent backing-store management */ +#ifdef USE_MSDOS_MEMMGR + /* For the MS-DOS manager (jmemdos.c), we need: */ + handle_union handle; /* reference to backing-store storage object */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else + /* For a typical implementation with temp files, we need: */ + FILE * temp_file; /* stdio reference to temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ +#endif +} backing_store_info; + +/* + * Initial opening of a backing-store object. This must fill in the + * read/write/close pointers in the object. The read/write routines + * may take an error exit if the specified maximum file size is exceeded. + * (If jpeg_mem_available always returns a large value, this routine can + * just take an error exit.) + */ + +EXTERN void jpeg_open_backing_store JPP((j_common_ptr cinfo, + backing_store_ptr info, + long total_bytes_needed)); + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. jpeg_mem_init will be called before anything is + * allocated (and, therefore, nothing in cinfo is of use except the error + * manager pointer). It should return a suitable default value for + * max_memory_to_use; this may subsequently be overridden by the surrounding + * application. (Note that max_memory_to_use is only important if + * jpeg_mem_available chooses to consult it ... no one else will.) + * jpeg_mem_term may assume that all requested memory has been freed and that + * all opened backing-store objects have been closed. + */ + +EXTERN long jpeg_mem_init JPP((j_common_ptr cinfo)); +EXTERN void jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/libs/jpeg6/jmorecfg.h b/libs/jpeg6/jmorecfg.h index d451399..7e83fec 100755 --- a/libs/jpeg6/jmorecfg.h +++ b/libs/jpeg6/jmorecfg.h @@ -1,346 +1,346 @@ -/* - * jmorecfg.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains additional configuration options that customize the - * JPEG software for special applications or support machine-dependent - * optimizations. Most users will not need to touch this file. - */ - - -/* - * Define BITS_IN_JSAMPLE as either - * 8 for 8-bit sample values (the usual setting) - * 12 for 12-bit sample values - * Only 8 and 12 are legal data precisions for lossy JPEG according to the - * JPEG standard, and the IJG code does not support anything else! - * We do not support run-time selection of data precision, sorry. - */ - -#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ - - -/* - * Maximum number of components (color channels) allowed in JPEG image. - * To meet the letter of the JPEG spec, set this to 255. However, darn - * few applications need more than 4 channels (maybe 5 for CMYK + alpha - * mask). We recommend 10 as a reasonable compromise; use 4 if you are - * really short on memory. (Each allowed component costs a hundred or so - * bytes of storage, whether actually used in an image or not.) - */ - -#define MAX_COMPONENTS 10 /* maximum number of image components */ - - -/* - * Basic data types. - * You may need to change these if you have a machine with unusual data - * type sizes; for example, "char" not 8 bits, "short" not 16 bits, - * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, - * but it had better be at least 16. - */ - -/* Representation of a single sample (pixel element value). - * We frequently allocate large arrays of these, so it's important to keep - * them small. But if you have memory to burn and access to char or short - * arrays is very slow on your hardware, you might want to change these. - */ - -#if BITS_IN_JSAMPLE == 8 -/* JSAMPLE should be the smallest type that will hold the values 0..255. - * You can use a signed char by having GETJSAMPLE mask it with 0xFF. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JSAMPLE; -#ifdef CHAR_IS_UNSIGNED -#define GETJSAMPLE(value) ((int) (value)) -#else -#define GETJSAMPLE(value) ((int) (value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - -#define MAXJSAMPLE 255 -#define CENTERJSAMPLE 128 - -#endif /* BITS_IN_JSAMPLE == 8 */ - - -#if BITS_IN_JSAMPLE == 12 -/* JSAMPLE should be the smallest type that will hold the values 0..4095. - * On nearly all machines "short" will do nicely. - */ - -typedef short JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#define MAXJSAMPLE 4095 -#define CENTERJSAMPLE 2048 - -#endif /* BITS_IN_JSAMPLE == 12 */ - - -/* Representation of a DCT frequency coefficient. - * This should be a signed value of at least 16 bits; "short" is usually OK. - * Again, we allocate large arrays of these, but you can change to int - * if you have memory to burn and "short" is really slow. - */ - -typedef short JCOEF; - - -/* Compressed datastreams are represented as arrays of JOCTET. - * These must be EXACTLY 8 bits wide, at least once they are written to - * external storage. Note that when using the stdio data source/destination - * managers, this is also the data type passed to fread/fwrite. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JOCTET; -#define GETJOCTET(value) (value) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JOCTET; -#ifdef CHAR_IS_UNSIGNED -#define GETJOCTET(value) (value) -#else -#define GETJOCTET(value) ((value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - - -/* These typedefs are used for various table entries and so forth. - * They must be at least as wide as specified; but making them too big - * won't cost a huge amount of memory, so we don't provide special - * extraction code like we did for JSAMPLE. (In other words, these - * typedefs live at a different point on the speed/space tradeoff curve.) - */ - -/* UINT8 must hold at least the values 0..255. */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char UINT8; -#else /* not HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char UINT8; -#else /* not CHAR_IS_UNSIGNED */ -typedef short UINT8; -#endif /* CHAR_IS_UNSIGNED */ -#endif /* HAVE_UNSIGNED_CHAR */ - -/* UINT16 must hold at least the values 0..65535. */ - -#ifdef HAVE_UNSIGNED_SHORT -typedef unsigned short UINT16; -#else /* not HAVE_UNSIGNED_SHORT */ -typedef unsigned int UINT16; -#endif /* HAVE_UNSIGNED_SHORT */ - -/* INT16 must hold at least the values -32768..32767. */ - -#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ -typedef short INT16; -#endif - -/* INT32 must hold at least signed 32-bit values. */ - -//#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ -//typedef long INT32; -//#endif - -/* Datatype used for image dimensions. The JPEG standard only supports - * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore - * "unsigned int" is sufficient on all machines. However, if you need to - * handle larger images and you don't mind deviating from the spec, you - * can change this datatype. - */ - -typedef unsigned int JDIMENSION; - -#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ - - -/* These defines are used in all function definitions and extern declarations. - * You could modify them if you need to change function linkage conventions. - * Another application is to make all functions global for use with debuggers - * or code profilers that require it. - */ - -#define METHODDEF static /* a function called through method pointers */ -#define LOCAL static /* a function used only in its module */ -#define GLOBAL /* a function referenced thru EXTERNs */ -#define EXTERN extern /* a reference to a GLOBAL function */ - - -/* Here is the pseudo-keyword for declaring pointers that must be "far" - * on 80x86 machines. Most of the specialized coding for 80x86 is handled - * by just saying "FAR *" where such a pointer is needed. In a few places - * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. - */ - -#ifdef NEED_FAR_POINTERS -#undef FAR -#define FAR far -#else -#undef FAR -#define FAR -#endif - - -/* - * On a few systems, type boolean and/or its values FALSE, TRUE may appear - * in standard header files. Or you may have conflicts with application- - * specific header files that you want to include together with these files. - * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. - */ - -//#ifndef HAVE_BOOLEAN -//typedef int boolean; -//#endif -#ifndef FALSE /* in case these macros already exist */ -#define FALSE 0 /* values of boolean */ -#endif -#ifndef TRUE -#define TRUE 1 -#endif - - -/* - * The remaining options affect code selection within the JPEG library, - * but they don't need to be visible to most applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. - */ - -#ifdef JPEG_INTERNALS -#define JPEG_INTERNAL_OPTIONS -#endif - -#ifdef JPEG_INTERNAL_OPTIONS - - -/* - * These defines indicate whether to include various optional functions. - * Undefining some of these symbols will produce a smaller but less capable - * library. Note that you can leave certain source files out of the - * compilation/linking process if you've #undef'd the corresponding symbols. - * (You may HAVE to do that if your compiler doesn't like null source files.) - */ - -/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */ - -/* Capability options common to encoder and decoder: */ - -#undef DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ -#undef DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ -#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ - -/* Encoder capability options: */ - -#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ -/* Note: if you selected 12-bit data precision, it is dangerous to turn off - * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit - * precision, so jchuff.c normally uses entropy optimization to compute - * usable tables for higher precision. If you don't want to do optimization, - * you'll have to supply different default Huffman tables. - * The exact same statements apply for progressive JPEG: the default tables - * don't work for progressive mode. (This may get fixed, however.) - */ -#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ - -/* Decoder capability options: */ - -#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#undef D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#undef D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#undef BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ -#undef IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ -#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ -#undef UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ -#undef QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ -#undef QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ - -/* more capability options later, no doubt */ - - -/* - * Ordering of RGB data in scanlines passed to or from the application. - * If your application wants to deal with data in the order B,G,R, just - * change these macros. You can also deal with formats such as R,G,B,X - * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing - * the offsets will also change the order in which colormap data is organized. - * RESTRICTIONS: - * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. - * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not - * useful if you are using JPEG color spaces other than YCbCr or grayscale. - * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE - * is not 3 (they don't understand about dummy color components!). So you - * can't use color quantization if you change that value. - */ - -#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ -#define RGB_GREEN 1 /* Offset of Green */ -#define RGB_BLUE 2 /* Offset of Blue */ -#define RGB_PIXELSIZE 4 /* JSAMPLEs per RGB scanline element */ - - -/* Definitions for speed-related optimizations. */ - - -/* If your compiler supports inline functions, define INLINE - * as the inline keyword; otherwise define it as empty. - */ - -#ifndef INLINE -#ifdef __GNUC__ /* for instance, GNU C knows about inline */ -#define INLINE __inline__ -#endif -#ifndef INLINE -#define INLINE /* default is to define it as empty */ -#endif -#endif - - -/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying - * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER - * as short on such a machine. MULTIPLIER must be at least 16 bits wide. - */ - -#ifndef MULTIPLIER -#define MULTIPLIER int /* type for fastest integer multiply */ -#endif - - -/* FAST_FLOAT should be either float or double, whichever is done faster - * by your compiler. (Note that this type is only used in the floating point - * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) - * Typically, float is faster in ANSI C compilers, while double is faster in - * pre-ANSI compilers (because they insist on converting to double anyway). - * The code below therefore chooses float if we have ANSI-style prototypes. - */ - -#ifndef FAST_FLOAT -#ifdef HAVE_PROTOTYPES -#define FAST_FLOAT float -#else -#define FAST_FLOAT double -#endif -#endif - -#endif /* JPEG_INTERNAL_OPTIONS */ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 12 for 12-bit sample values + * Only 8 and 12 are legal data precisions for lossy JPEG according to the + * JPEG standard, and the IJG code does not support anything else! + * We do not support run-time selection of data precision, sorry. + */ + +#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef CHAR_IS_UNSIGNED +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef CHAR_IS_UNSIGNED +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char UINT8; +#else /* not CHAR_IS_UNSIGNED */ +typedef short UINT8; +#endif /* CHAR_IS_UNSIGNED */ +#endif /* HAVE_UNSIGNED_CHAR */ + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +//#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +//typedef long INT32; +//#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These defines are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +#define METHODDEF static /* a function called through method pointers */ +#define LOCAL static /* a function used only in its module */ +#define GLOBAL /* a function referenced thru EXTERNs */ +#define EXTERN extern /* a reference to a GLOBAL function */ + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifdef NEED_FAR_POINTERS +#undef FAR +#define FAR far +#else +#undef FAR +#define FAR +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +//#ifndef HAVE_BOOLEAN +//typedef int boolean; +//#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */ + +/* Capability options common to encoder and decoder: */ + +#undef DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#undef DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected 12-bit data precision, it is dangerous to turn off + * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit + * precision, so jchuff.c normally uses entropy optimization to compute + * usable tables for higher precision. If you don't want to do optimization, + * you'll have to supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#undef D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#undef D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#undef BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#undef IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#undef UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#undef QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#undef QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not + * useful if you are using JPEG color spaces other than YCbCr or grayscale. + * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 4 /* JSAMPLEs per RGB scanline element */ + + +/* Definitions for speed-related optimizations. */ + + +/* If your compiler supports inline functions, define INLINE + * as the inline keyword; otherwise define it as empty. + */ + +#ifndef INLINE +#ifdef __GNUC__ /* for instance, GNU C knows about inline */ +#define INLINE __inline__ +#endif +#ifndef INLINE +#define INLINE /* default is to define it as empty */ +#endif +#endif + + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#define MULTIPLIER int /* type for fastest integer multiply */ +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/libs/jpeg6/jpeg6.vcproj b/libs/jpeg6/jpeg6.vcproj index f17e134..ef6f2ab 100755 --- a/libs/jpeg6/jpeg6.vcproj +++ b/libs/jpeg6/jpeg6.vcproj @@ -1,603 +1,603 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/libs/jpeg6/jpegint.h b/libs/jpeg6/jpegint.h index b3b6a6d..ab5bee2 100755 --- a/libs/jpeg6/jpegint.h +++ b/libs/jpeg6/jpegint.h @@ -1,388 +1,388 @@ -/* - * jpegint.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides common declarations for the various JPEG modules. - * These declarations are considered internal to the JPEG library; most - * applications using the library shouldn't need to include this file. - */ - - -/* Declarations for both compression & decompression */ - -typedef enum { /* Operating modes for buffer controllers */ - JBUF_PASS_THRU, /* Plain stripwise operation */ - /* Remaining modes require a full-image buffer to have been created */ - JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ - JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ - JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ -} J_BUF_MODE; - -/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ -#define CSTATE_START 100 /* after create_compress */ -#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ -#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ -#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ -#define DSTATE_START 200 /* after create_decompress */ -#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ -#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ -#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ -#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ -#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ -#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ -#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ -#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ -#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ -#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ - - -/* Declarations for compression modules */ - -/* Master control module */ -struct jpeg_comp_master { - JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); - JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean call_pass_startup; /* True if pass_startup must be called */ - boolean is_last_pass; /* True during last pass */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_c_main_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail)); -}; - -/* Compression preprocessing (downsampling input buffer control) */ -struct jpeg_c_prep_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, - JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_c_coef_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf)); -}; - -/* Colorspace conversion */ -struct jpeg_color_converter { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, color_convert, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows)); -}; - -/* Downsampling */ -struct jpeg_downsampler { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, downsample, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, - JDIMENSION out_row_group_index)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Forward DCT (also controls coefficient quantization) */ -struct jpeg_forward_dct { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - /* perhaps this should be an array??? */ - JMETHOD(void, forward_DCT, (j_compress_ptr cinfo, - jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks)); -}; - -/* Entropy encoding */ -struct jpeg_entropy_encoder { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); - JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); -}; - -/* Marker writing */ -struct jpeg_marker_writer { - /* write_any_marker is exported for use by applications */ - /* Probably only COM and APPn markers should be written */ - JMETHOD(void, write_any_marker, (j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen)); - JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); - JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); -}; - - -/* Declarations for decompression modules */ - -/* Master control module */ -struct jpeg_decomp_master { - JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ -}; - -/* Input control module */ -struct jpeg_input_controller { - JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); - JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean has_multiple_scans; /* True if file has multiple scans */ - boolean eoi_reached; /* True when EOI has been consumed */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_d_main_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_d_coef_controller { - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); - JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, - JSAMPIMAGE output_buf)); - /* Pointer to array of coefficient virtual arrays, or NULL if none */ - jvirt_barray_ptr *coef_arrays; -}; - -/* Decompression postprocessing (color quantization buffer control) */ -struct jpeg_d_post_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Marker reading & parsing */ -struct jpeg_marker_reader { - JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); - /* Read markers until SOS or EOI. - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); - /* Read a restart marker --- exported for use by entropy decoder only */ - jpeg_marker_parser_method read_restart_marker; - /* Application-overridable marker processing methods */ - jpeg_marker_parser_method process_COM; - jpeg_marker_parser_method process_APPn[16]; - - /* State of marker reader --- nominally internal, but applications - * supplying COM or APPn handlers might like to know the state. - */ - boolean saw_SOI; /* found SOI? */ - boolean saw_SOF; /* found SOF? */ - int next_restart_num; /* next restart number expected (0-7) */ - unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ -}; - -/* Entropy decoding */ -struct jpeg_entropy_decoder { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -}; - -/* Inverse DCT (also performs dequantization) */ -typedef JMETHOD(void, inverse_DCT_method_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col)); - -struct jpeg_inverse_dct { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - /* It is useful to allow each component to have a separate IDCT method. */ - inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; -}; - -/* Upsampling (note that upsampler must also call color converter) */ -struct jpeg_upsampler { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, upsample, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Colorspace conversion */ -struct jpeg_color_deconverter { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, color_convert, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows)); -}; - -/* Color quantization or color precision reduction */ -struct jpeg_color_quantizer { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); - JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, - int num_rows)); - JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); -}; - - -/* Miscellaneous useful macros */ - -#undef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#undef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) - - -/* We assume that right shift corresponds to signed division by 2 with - * rounding towards minus infinity. This is correct for typical "arithmetic - * shift" instructions that shift in copies of the sign bit. But some - * C compilers implement >> with an unsigned shift. For these machines you - * must define RIGHT_SHIFT_IS_UNSIGNED. - * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. - * It is only applied with constant shift counts. SHIFT_TEMPS must be - * included in the variables of any routine using RIGHT_SHIFT. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define SHIFT_TEMPS INT32 shift_temp; -#define RIGHT_SHIFT(x,shft) \ - ((shift_temp = (x)) < 0 ? \ - (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ - (shift_temp >> (shft))) -#else -#define SHIFT_TEMPS -#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jinit_compress_master jICompress -#define jinit_c_master_control jICMaster -#define jinit_c_main_controller jICMainC -#define jinit_c_prep_controller jICPrepC -#define jinit_c_coef_controller jICCoefC -#define jinit_color_converter jICColor -#define jinit_downsampler jIDownsampler -#define jinit_forward_dct jIFDCT -#define jinit_huff_encoder jIHEncoder -#define jinit_phuff_encoder jIPHEncoder -#define jinit_marker_writer jIMWriter -#define jinit_master_decompress jIDMaster -#define jinit_d_main_controller jIDMainC -#define jinit_d_coef_controller jIDCoefC -#define jinit_d_post_controller jIDPostC -#define jinit_input_controller jIInCtlr -#define jinit_marker_reader jIMReader -#define jinit_huff_decoder jIHDecoder -#define jinit_phuff_decoder jIPHDecoder -#define jinit_inverse_dct jIIDCT -#define jinit_upsampler jIUpsampler -#define jinit_color_deconverter jIDColor -#define jinit_1pass_quantizer jI1Quant -#define jinit_2pass_quantizer jI2Quant -#define jinit_merged_upsampler jIMUpsampler -#define jinit_memory_mgr jIMemMgr -#define jdiv_round_up jDivRound -#define jround_up jRound -#define jcopy_sample_rows jCopySamples -#define jcopy_block_row jCopyBlocks -#define jzero_far jZeroFar -#define jpeg_zigzag_order jZIGTable -#define jpeg_natural_order jZAGTable -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Compression module initialization routines */ -EXTERN void jinit_compress_master JPP((j_compress_ptr cinfo)); -EXTERN void jinit_c_master_control JPP((j_compress_ptr cinfo, - boolean transcode_only)); -EXTERN void jinit_c_main_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_c_prep_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_c_coef_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_color_converter JPP((j_compress_ptr cinfo)); -EXTERN void jinit_downsampler JPP((j_compress_ptr cinfo)); -EXTERN void jinit_forward_dct JPP((j_compress_ptr cinfo)); -EXTERN void jinit_huff_encoder JPP((j_compress_ptr cinfo)); -EXTERN void jinit_phuff_encoder JPP((j_compress_ptr cinfo)); -EXTERN void jinit_marker_writer JPP((j_compress_ptr cinfo)); -/* Decompression module initialization routines */ -EXTERN void jinit_master_decompress JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_d_main_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_d_coef_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_d_post_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_input_controller JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_marker_reader JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_huff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_phuff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_inverse_dct JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_upsampler JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_color_deconverter JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); -/* Memory manager initialization */ -EXTERN void jinit_memory_mgr JPP((j_common_ptr cinfo)); - -/* Utility routines in jutils.c */ -EXTERN long jdiv_round_up JPP((long a, long b)); -EXTERN long jround_up JPP((long a, long b)); -EXTERN void jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols)); -EXTERN void jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks)); -EXTERN void jzero_far JPP((void FAR * target, size_t bytestozero)); -/* Constant tables in jutils.c */ -extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ -extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ - -/* Suppress undefined-structure complaints if necessary. */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -#endif -#endif /* INCOMPLETE_TYPES_BROKEN */ +/* + * jpegint.h + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* perhaps this should be an array??? */ + JMETHOD(void, forward_DCT, (j_compress_ptr cinfo, + jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + /* write_any_marker is exported for use by applications */ + /* Probably only COM and APPn markers should be written */ + JMETHOD(void, write_any_marker, (j_compress_ptr cinfo, int marker, + const JOCTET *dataptr, unsigned int datalen)); + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + /* Application-overridable marker processing methods */ + jpeg_marker_parser_method process_COM; + jpeg_marker_parser_method process_APPn[16]; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_phuff_encoder jIPHEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_phuff_decoder jIPHDecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jzero_far jZeroFar +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Compression module initialization routines */ +EXTERN void jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN void jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN void jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN void jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN void jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN void jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN void jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN void jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN void jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN void jinit_phuff_encoder JPP((j_compress_ptr cinfo)); +EXTERN void jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN void jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN void jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN void jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN void jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_phuff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN void jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN void jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN long jdiv_round_up JPP((long a, long b)); +EXTERN long jround_up JPP((long a, long b)); +EXTERN void jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN void jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +EXTERN void jzero_far JPP((void FAR * target, size_t bytestozero)); +/* Constant tables in jutils.c */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/libs/jpeg6/jpgload.cpp b/libs/jpeg6/jpgload.cpp index 1006b99..ca64685 100755 --- a/libs/jpeg6/jpgload.cpp +++ b/libs/jpeg6/jpgload.cpp @@ -1,142 +1,142 @@ - - -#include "jpeglib.h" -#include - -GLOBAL void LoadJPGBuff(unsigned char *fbuffer, unsigned char **pic, int *width, int *height ) -{ - /* This struct contains the JPEG decompression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - */ - struct jpeg_decompress_struct cinfo; - /* We use our private extension JPEG error handler. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - /* This struct represents a JPEG error handler. It is declared separately - * because applications often want to supply a specialized error handler - * (see the second half of this file for an example). But here we just - * take the easy way out and use the standard error handler, which will - * print a message on stderr and call exit() if compression fails. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - - struct jpeg_error_mgr jerr; - /* More stuff */ - JSAMPARRAY buffer; /* Output row buffer */ - int row_stride; /* physical row width in output buffer */ - unsigned char *out; - byte *bbuf; - int nSize; - - /* Step 1: allocate and initialize JPEG decompression object */ - - /* We have to set up the error handler first, in case the initialization - * step fails. (Unlikely, but it could happen if you are out of memory.) - * This routine fills in the contents of struct jerr, and returns jerr's - * address which we place into the link field in cinfo. - */ - cinfo.err = jpeg_std_error(&jerr); - - /* Now we can initialize the JPEG decompression object. */ - jpeg_create_decompress(&cinfo); - - /* Step 2: specify data source (eg, a file) */ - - jpeg_stdio_src(&cinfo, fbuffer); - - /* Step 3: read file parameters with jpeg_read_header() */ - - (void) jpeg_read_header(&cinfo, TRUE); - /* We can ignore the return value from jpeg_read_header since - * (a) suspension is not possible with the stdio data source, and - * (b) we passed TRUE to reject a tables-only JPEG file as an error. - * See libjpeg.doc for more info. - */ - - /* Step 4: set parameters for decompression */ - - /* In this example, we don't need to change any of the defaults set by - * jpeg_read_header(), so we do nothing here. - */ - - /* Step 5: Start decompressor */ - - (void) jpeg_start_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* We may need to do some setup of our own at this point before reading - * the data. After jpeg_start_decompress() we have the correct scaled - * output image dimensions available, as well as the output colormap - * if we asked for color quantization. - * In this example, we need to make an output work buffer of the right size. - */ - /* JSAMPLEs per row in output buffer */ - row_stride = cinfo.output_width * cinfo.output_components; - - nSize = cinfo.output_width*cinfo.output_height*cinfo.output_components; - out = reinterpret_cast(malloc(nSize+1)); - memset(out, 0, nSize+1); - - *pic = out; - *width = cinfo.output_width; - *height = cinfo.output_height; - - /* Step 6: while (scan lines remain to be read) */ - /* jpeg_read_scanlines(...); */ - - /* Here we use the library's state variable cinfo.output_scanline as the - * loop counter, so that we don't have to keep track ourselves. - */ - while (cinfo.output_scanline < cinfo.output_height) { - /* jpeg_read_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could ask for - * more than one scanline at a time if that's more convenient. - */ - bbuf = ((out+(row_stride*cinfo.output_scanline))); - buffer = &bbuf; - (void) jpeg_read_scanlines(&cinfo, buffer, 1); - } - - // clear all the alphas to 255 - { - int i, j; - byte *buf; - - buf = *pic; - - j = cinfo.output_width * cinfo.output_height * 4; - for ( i = 3 ; i < j ; i+=4 ) { - buf[i] = 255; - } - } - - /* Step 7: Finish decompression */ - - (void) jpeg_finish_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* Step 8: Release JPEG decompression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_decompress(&cinfo); - - /* After finish_decompress, we can close the input file. - * Here we postpone it until after no more JPEG errors are possible, - * so as to simplify the setjmp error logic above. (Actually, I don't - * think that jpeg_destroy can do an error exit, but why assume anything...) - */ - //free (fbuffer); - - /* At this point you may want to check to see whether any corrupt-data - * warnings occurred (test whether jerr.pub.num_warnings is nonzero). - */ - - /* And we're done! */ -} - + + +#include "jpeglib.h" +#include + +GLOBAL void LoadJPGBuff(unsigned char *fbuffer, unsigned char **pic, int *width, int *height ) +{ + /* This struct contains the JPEG decompression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + */ + struct jpeg_decompress_struct cinfo; + /* We use our private extension JPEG error handler. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + /* This struct represents a JPEG error handler. It is declared separately + * because applications often want to supply a specialized error handler + * (see the second half of this file for an example). But here we just + * take the easy way out and use the standard error handler, which will + * print a message on stderr and call exit() if compression fails. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + + struct jpeg_error_mgr jerr; + /* More stuff */ + JSAMPARRAY buffer; /* Output row buffer */ + int row_stride; /* physical row width in output buffer */ + unsigned char *out; + byte *bbuf; + int nSize; + + /* Step 1: allocate and initialize JPEG decompression object */ + + /* We have to set up the error handler first, in case the initialization + * step fails. (Unlikely, but it could happen if you are out of memory.) + * This routine fills in the contents of struct jerr, and returns jerr's + * address which we place into the link field in cinfo. + */ + cinfo.err = jpeg_std_error(&jerr); + + /* Now we can initialize the JPEG decompression object. */ + jpeg_create_decompress(&cinfo); + + /* Step 2: specify data source (eg, a file) */ + + jpeg_stdio_src(&cinfo, fbuffer); + + /* Step 3: read file parameters with jpeg_read_header() */ + + (void) jpeg_read_header(&cinfo, TRUE); + /* We can ignore the return value from jpeg_read_header since + * (a) suspension is not possible with the stdio data source, and + * (b) we passed TRUE to reject a tables-only JPEG file as an error. + * See libjpeg.doc for more info. + */ + + /* Step 4: set parameters for decompression */ + + /* In this example, we don't need to change any of the defaults set by + * jpeg_read_header(), so we do nothing here. + */ + + /* Step 5: Start decompressor */ + + (void) jpeg_start_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* We may need to do some setup of our own at this point before reading + * the data. After jpeg_start_decompress() we have the correct scaled + * output image dimensions available, as well as the output colormap + * if we asked for color quantization. + * In this example, we need to make an output work buffer of the right size. + */ + /* JSAMPLEs per row in output buffer */ + row_stride = cinfo.output_width * cinfo.output_components; + + nSize = cinfo.output_width*cinfo.output_height*cinfo.output_components; + out = reinterpret_cast(malloc(nSize+1)); + memset(out, 0, nSize+1); + + *pic = out; + *width = cinfo.output_width; + *height = cinfo.output_height; + + /* Step 6: while (scan lines remain to be read) */ + /* jpeg_read_scanlines(...); */ + + /* Here we use the library's state variable cinfo.output_scanline as the + * loop counter, so that we don't have to keep track ourselves. + */ + while (cinfo.output_scanline < cinfo.output_height) { + /* jpeg_read_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could ask for + * more than one scanline at a time if that's more convenient. + */ + bbuf = ((out+(row_stride*cinfo.output_scanline))); + buffer = &bbuf; + (void) jpeg_read_scanlines(&cinfo, buffer, 1); + } + + // clear all the alphas to 255 + { + int i, j; + byte *buf; + + buf = *pic; + + j = cinfo.output_width * cinfo.output_height * 4; + for ( i = 3 ; i < j ; i+=4 ) { + buf[i] = 255; + } + } + + /* Step 7: Finish decompression */ + + (void) jpeg_finish_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* Step 8: Release JPEG decompression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_decompress(&cinfo); + + /* After finish_decompress, we can close the input file. + * Here we postpone it until after no more JPEG errors are possible, + * so as to simplify the setjmp error logic above. (Actually, I don't + * think that jpeg_destroy can do an error exit, but why assume anything...) + */ + //free (fbuffer); + + /* At this point you may want to check to see whether any corrupt-data + * warnings occurred (test whether jerr.pub.num_warnings is nonzero). + */ + + /* And we're done! */ +} + diff --git a/libs/jpeg6/jutils.cpp b/libs/jpeg6/jutils.cpp index 8e8dc13..4ba2a54 100755 --- a/libs/jpeg6/jutils.cpp +++ b/libs/jpeg6/jutils.cpp @@ -1,175 +1,175 @@ -/* - * jutils.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains tables and miscellaneous utility routines needed - * for both compression and decompression. - * Note we prefix all global names with "j" to minimize conflicts with - * a surrounding application. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element - * of a DCT block read in natural order (left to right, top to bottom). - */ - -const int jpeg_zigzag_order[DCTSIZE2] = { - 0, 1, 5, 6, 14, 15, 27, 28, - 2, 4, 7, 13, 16, 26, 29, 42, - 3, 8, 12, 17, 25, 30, 41, 43, - 9, 11, 18, 24, 31, 40, 44, 53, - 10, 19, 23, 32, 39, 45, 52, 54, - 20, 22, 33, 38, 46, 51, 55, 60, - 21, 34, 37, 47, 50, 56, 59, 61, - 35, 36, 48, 49, 57, 58, 62, 63 -}; - -/* - * jpeg_natural_order[i] is the natural-order position of the i'th element - * of zigzag order. - * - * When reading corrupted data, the Huffman decoders could attempt - * to reference an entry beyond the end of this array (if the decoded - * zero run length reaches past the end of the block). To prevent - * wild stores without adding an inner-loop test, we put some extra - * "63"s after the real entries. This will cause the extra coefficient - * to be stored in location 63 of the block, not somewhere random. - * The worst case would be a run-length of 15, which means we need 16 - * fake entries. - */ - -const int jpeg_natural_order[DCTSIZE2+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 5, - 12, 19, 26, 33, 40, 48, 41, 34, - 27, 20, 13, 6, 7, 14, 21, 28, - 35, 42, 49, 56, 57, 50, 43, 36, - 29, 22, 15, 23, 30, 37, 44, 51, - 58, 59, 52, 45, 38, 31, 39, 46, - 53, 60, 61, 54, 47, 55, 62, 63, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - - -/* - * Arithmetic utilities - */ - -GLOBAL long -jdiv_round_up (long a, long b) -/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ -/* Assumes a >= 0, b > 0 */ -{ - return (a + b - 1L) / b; -} - - -GLOBAL long -jround_up (long a, long b) -/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ -/* Assumes a >= 0, b > 0 */ -{ - a += b - 1L; - return a - (a % b); -} - - -/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays - * and coefficient-block arrays. This won't work on 80x86 because the arrays - * are FAR and we're assuming a small-pointer memory model. However, some - * DOS compilers provide far-pointer versions of memcpy() and memset() even - * in the small-model libraries. These will be used if USE_FMEM is defined. - * Otherwise, the routines below do it the hard way. (The performance cost - * is not all that great, because these routines aren't very heavily used.) - */ - -#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ -#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) -#define FMEMZERO(target,size) MEMZERO(target,size) -#else /* 80x86 case, define if we can */ -#ifdef USE_FMEM -#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) -#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) -#endif -#endif - - -GLOBAL void -jcopy_sample_rows (JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols) -/* Copy some rows of samples from one place to another. - * num_rows rows are copied from input_array[source_row++] - * to output_array[dest_row++]; these areas may overlap for duplication. - * The source and destination arrays must be at least as wide as num_cols. - */ -{ - register JSAMPROW inptr, outptr; -#ifdef FMEMCOPY - register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); -#else - register JDIMENSION count; -#endif - register int row; - - input_array += source_row; - output_array += dest_row; - - for (row = num_rows; row > 0; row--) { - inptr = *input_array++; - outptr = *output_array++; -#ifdef FMEMCOPY - FMEMCOPY(outptr, inptr, count); -#else - for (count = num_cols; count > 0; count--) - *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ -#endif - } -} - - -GLOBAL void -jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks) -/* Copy a row of coefficient blocks from one place to another. */ -{ -#ifdef FMEMCOPY - FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); -#else - register JCOEFPTR inptr, outptr; - register long count; - - inptr = (JCOEFPTR) input_row; - outptr = (JCOEFPTR) output_row; - for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { - *outptr++ = *inptr++; - } -#endif -} - - -GLOBAL void -jzero_far (void FAR * target, size_t bytestozero) -/* Zero out a chunk of FAR memory. */ -/* This might be sample-array data, block-array data, or alloc_large data. */ -{ -#ifdef FMEMZERO - FMEMZERO(target, bytestozero); -#else - register char FAR * ptr = (char FAR *) target; - register size_t count; - - for (count = bytestozero; count > 0; count--) { - *ptr++ = 0; - } -#endif -} +/* + * jutils.c + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains tables and miscellaneous utility routines needed + * for both compression and decompression. + * Note we prefix all global names with "j" to minimize conflicts with + * a surrounding application. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element + * of a DCT block read in natural order (left to right, top to bottom). + */ + +const int jpeg_zigzag_order[DCTSIZE2] = { + 0, 1, 5, 6, 14, 15, 27, 28, + 2, 4, 7, 13, 16, 26, 29, 42, + 3, 8, 12, 17, 25, 30, 41, 43, + 9, 11, 18, 24, 31, 40, 44, 53, + 10, 19, 23, 32, 39, 45, 52, 54, + 20, 22, 33, 38, 46, 51, 55, 60, + 21, 34, 37, 47, 50, 56, 59, 61, + 35, 36, 48, 49, 57, 58, 62, 63 +}; + +/* + * jpeg_natural_order[i] is the natural-order position of the i'th element + * of zigzag order. + * + * When reading corrupted data, the Huffman decoders could attempt + * to reference an entry beyond the end of this array (if the decoded + * zero run length reaches past the end of the block). To prevent + * wild stores without adding an inner-loop test, we put some extra + * "63"s after the real entries. This will cause the extra coefficient + * to be stored in location 63 of the block, not somewhere random. + * The worst case would be a run-length of 15, which means we need 16 + * fake entries. + */ + +const int jpeg_natural_order[DCTSIZE2+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + + +/* + * Arithmetic utilities + */ + +GLOBAL long +jdiv_round_up (long a, long b) +/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ +/* Assumes a >= 0, b > 0 */ +{ + return (a + b - 1L) / b; +} + + +GLOBAL long +jround_up (long a, long b) +/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ +/* Assumes a >= 0, b > 0 */ +{ + a += b - 1L; + return a - (a % b); +} + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines below do it the hard way. (The performance cost + * is not all that great, because these routines aren't very heavily used.) + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ +#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) +#define FMEMZERO(target,size) MEMZERO(target,size) +#else /* 80x86 case, define if we can */ +#ifdef USE_FMEM +#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) +#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#endif +#endif + + +GLOBAL void +jcopy_sample_rows (JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols) +/* Copy some rows of samples from one place to another. + * num_rows rows are copied from input_array[source_row++] + * to output_array[dest_row++]; these areas may overlap for duplication. + * The source and destination arrays must be at least as wide as num_cols. + */ +{ + register JSAMPROW inptr, outptr; +#ifdef FMEMCOPY + register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); +#else + register JDIMENSION count; +#endif + register int row; + + input_array += source_row; + output_array += dest_row; + + for (row = num_rows; row > 0; row--) { + inptr = *input_array++; + outptr = *output_array++; +#ifdef FMEMCOPY + FMEMCOPY(outptr, inptr, count); +#else + for (count = num_cols; count > 0; count--) + *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ +#endif + } +} + + +GLOBAL void +jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks) +/* Copy a row of coefficient blocks from one place to another. */ +{ +#ifdef FMEMCOPY + FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); +#else + register JCOEFPTR inptr, outptr; + register long count; + + inptr = (JCOEFPTR) input_row; + outptr = (JCOEFPTR) output_row; + for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { + *outptr++ = *inptr++; + } +#endif +} + + +GLOBAL void +jzero_far (void FAR * target, size_t bytestozero) +/* Zero out a chunk of FAR memory. */ +/* This might be sample-array data, block-array data, or alloc_large data. */ +{ +#ifdef FMEMZERO + FMEMZERO(target, bytestozero); +#else + register char FAR * ptr = (char FAR *) target; + register size_t count; + + for (count = bytestozero; count > 0; count--) { + *ptr++ = 0; + } +#endif +} diff --git a/libs/jpeg6/jversion.h b/libs/jpeg6/jversion.h index 02083ac..f2f1b8d 100755 --- a/libs/jpeg6/jversion.h +++ b/libs/jpeg6/jversion.h @@ -1,14 +1,14 @@ -/* - * jversion.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains software version identification. - */ - - -#define JVERSION "6 2-Aug-95" - -#define JCOPYRIGHT "Copyright (C) 1995, Thomas G. Lane" +/* + * jversion.h + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains software version identification. + */ + + +#define JVERSION "6 2-Aug-95" + +#define JCOPYRIGHT "Copyright (C) 1995, Thomas G. Lane" diff --git a/libs/jpeglib.h b/libs/jpeglib.h index 81ca1b4..e93ab53 100755 --- a/libs/jpeglib.h +++ b/libs/jpeglib.h @@ -1,1087 +1,1087 @@ -/* - * jpeglib.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the application interface for the JPEG library. - * Most applications using the library need only include this file, - * and perhaps jerror.h if they want to know the exact error codes. - */ - -#ifndef JPEGLIB_H -#define JPEGLIB_H - -#ifdef __cplusplus -extern "C" -{ -#endif - - - -#ifdef __MACOS__ - -// JDC: stuff to make mac version compile -#define boolean qboolean -#define register -#define INT32 int - -#endif - -// rad additions -// 11.29.99 - -//#include "cmdlib.h" -#ifdef _WIN32 -#include "windows.h" -#include "stdio.h" -#endif - -#ifndef INT32 -#define INT32 int -#endif - -extern void LoadJPGBuff(unsigned char *fbuffer, unsigned char **pic, int *width, int *height ); -// rad end - - -/* - * First we include the configuration files that record how this - * installation of the JPEG library is set up. jconfig.h can be - * generated automatically for many systems. jmorecfg.h contains - * manual configuration options that most people need not worry about. - */ - -#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ -#include "jpeg6/jconfig.h" /* widely used configuration options */ -#endif -#include "jpeg6/jmorecfg.h" /* seldom changed options */ - - -/* Version ID for the JPEG library. - * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". - */ - -#define JPEG_LIB_VERSION 60 /* Version 6 */ - - -/* Various constants determining the sizes of things. - * All of these are specified by the JPEG standard, so don't change them - * if you want to be compatible. - */ - -#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ -#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ -#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ -#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ -#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ -#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ -#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ -/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; - * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. - * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU - * to handle it. We even let you do this from the jconfig.h file. However, - * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe - * sometimes emits noncompliant files doesn't mean you should too. - */ -#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ -#ifndef D_MAX_BLOCKS_IN_MCU -#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ -#endif - - -/* This macro is used to declare a "method", that is, a function pointer. - * We want to supply prototype parameters if the compiler can cope. - * Note that the arglist parameter must be parenthesized! - */ - -#ifdef HAVE_PROTOTYPES -#define JMETHOD(type,methodname,arglist) type (*methodname) arglist -#else -#define JMETHOD(type,methodname,arglist) type (*methodname) () -#endif - - -/* Data structures for images (arrays of samples and of DCT coefficients). - * On 80x86 machines, the image arrays are too big for near pointers, - * but the pointer arrays can fit in near memory. - */ - -typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ -typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ -typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ - -typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ -typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ -typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ -typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ - -typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ - - -/* Types for JPEG compression parameters and working tables. */ - - -/* DCT coefficient quantization tables. */ - -typedef struct { - /* This field directly represents the contents of a JPEG DQT marker. - * Note: the values are always given in zigzag order. - */ - UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JQUANT_TBL; - - -/* Huffman coding tables. */ - -typedef struct { - /* These two fields directly represent the contents of a JPEG DHT marker */ - UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ - /* length k bits; bits[0] is unused */ - UINT8 huffval[256]; /* The symbols, in order of incr code length */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JHUFF_TBL; - - -/* Basic info about one component (color channel). */ - -typedef struct { - /* These values are fixed over the whole image. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOF marker. */ - int component_id; /* identifier for this component (0..255) */ - int component_index; /* its index in SOF or cinfo->comp_info[] */ - int h_samp_factor; /* horizontal sampling factor (1..4) */ - int v_samp_factor; /* vertical sampling factor (1..4) */ - int quant_tbl_no; /* quantization table selector (0..3) */ - /* These values may vary between scans. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOS marker. */ - /* The decompressor output side may not use these variables. */ - int dc_tbl_no; /* DC entropy table selector (0..3) */ - int ac_tbl_no; /* AC entropy table selector (0..3) */ - - /* Remaining fields should be treated as private by applications. */ - - /* These values are computed during compression or decompression startup: */ - /* Component's size in DCT blocks. - * Any dummy blocks added to complete an MCU are not counted; therefore - * these values do not depend on whether a scan is interleaved or not. - */ - JDIMENSION width_in_blocks; - JDIMENSION height_in_blocks; - /* Size of a DCT block in samples. Always DCTSIZE for compression. - * For decompression this is the size of the output from one DCT block, - * reflecting any scaling we choose to apply during the IDCT step. - * Values of 1,2,4,8 are likely to be supported. Note that different - * components may receive different IDCT scalings. - */ - int DCT_scaled_size; - /* The downsampled dimensions are the component's actual, unpadded number - * of samples at the main buffer (preprocessing/compression interface), thus - * downsampled_width = ceil(image_width * Hi/Hmax) - * and similarly for height. For decompression, IDCT scaling is included, so - * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) - */ - JDIMENSION downsampled_width; /* actual width in samples */ - JDIMENSION downsampled_height; /* actual height in samples */ - /* This flag is used only for decompression. In cases where some of the - * components will be ignored (eg grayscale output from YCbCr image), - * we can skip most computations for the unused components. - */ - boolean component_needed; /* do we need the value of this component? */ - - /* These values are computed before starting a scan of the component. */ - /* The decompressor output side may not use these variables. */ - int MCU_width; /* number of blocks per MCU, horizontally */ - int MCU_height; /* number of blocks per MCU, vertically */ - int MCU_blocks; /* MCU_width * MCU_height */ - int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ - int last_col_width; /* # of non-dummy blocks across in last MCU */ - int last_row_height; /* # of non-dummy blocks down in last MCU */ - - /* Saved quantization table for component; NULL if none yet saved. - * See jdinput.c comments about the need for this information. - * This field is not currently used by the compressor. - */ - JQUANT_TBL * quant_table; - - /* Private per-component storage for DCT or IDCT subsystem. */ - void * dct_table; -} jpeg_component_info; - - -/* The script for encoding a multiple-scan file is an array of these: */ - -typedef struct { - int comps_in_scan; /* number of components encoded in this scan */ - int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ - int Ss, Se; /* progressive JPEG spectral selection parms */ - int Ah, Al; /* progressive JPEG successive approx. parms */ -} jpeg_scan_info; - - -/* Known color spaces. */ - -typedef enum { - JCS_UNKNOWN, /* error/unspecified */ - JCS_GRAYSCALE, /* monochrome */ - JCS_RGB, /* red/green/blue */ - JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ - JCS_CMYK, /* C/M/Y/K */ - JCS_YCCK /* Y/Cb/Cr/K */ -} J_COLOR_SPACE; - -/* DCT/IDCT algorithm options. */ - -typedef enum { - JDCT_ISLOW, /* slow but accurate integer algorithm */ - JDCT_IFAST, /* faster, less accurate integer method */ - JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ -} J_DCT_METHOD; - -#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ -#define JDCT_DEFAULT JDCT_ISLOW -#endif -#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ -#define JDCT_FASTEST JDCT_IFAST -#endif - -/* Dithering options for decompression. */ - -typedef enum { - JDITHER_NONE, /* no dithering */ - JDITHER_ORDERED, /* simple ordered dither */ - JDITHER_FS /* Floyd-Steinberg error diffusion dither */ -} J_DITHER_MODE; - - -/* Common fields between JPEG compression and decompression master structs. */ - -#define jpeg_common_fields \ - struct jpeg_error_mgr * err; /* Error handler module */\ - struct jpeg_memory_mgr * mem; /* Memory manager module */\ - struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ - boolean is_decompressor; /* so common code can tell which is which */\ - int global_state /* for checking call sequence validity */ - -/* Routines that are to be used by both halves of the library are declared - * to receive a pointer to this structure. There are no actual instances of - * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. - */ -struct jpeg_common_struct { - jpeg_common_fields; /* Fields common to both master struct types */ - /* Additional fields follow in an actual jpeg_compress_struct or - * jpeg_decompress_struct. All three structs must agree on these - * initial fields! (This would be a lot cleaner in C++.) - */ -}; - -typedef struct jpeg_common_struct * j_common_ptr; -typedef struct jpeg_compress_struct * j_compress_ptr; -typedef struct jpeg_decompress_struct * j_decompress_ptr; - - -/* Master record for a compression instance */ - -struct jpeg_compress_struct { - jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ - - /* Destination for compressed data */ - struct jpeg_destination_mgr * dest; - - /* Description of source image --- these fields must be filled in by - * outer application before starting compression. in_color_space must - * be correct before you can even call jpeg_set_defaults(). - */ - - JDIMENSION image_width; /* input image width */ - JDIMENSION image_height; /* input image height */ - int input_components; /* # of color components in input image */ - J_COLOR_SPACE in_color_space; /* colorspace of input image */ - - double input_gamma; /* image gamma of input image */ - - /* Compression parameters --- these fields must be set before calling - * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to - * initialize everything to reasonable defaults, then changing anything - * the application specifically wants to change. That way you won't get - * burnt when new parameters are added. Also note that there are several - * helper routines to simplify changing parameters. - */ - - int data_precision; /* bits of precision in image data */ - - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - int num_scans; /* # of entries in scan_info array */ - const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ - /* The default value of scan_info is NULL, which causes a single-scan - * sequential JPEG file to be emitted. To create a multi-scan file, - * set num_scans and scan_info to point to an array of scan definitions. - */ - - boolean raw_data_in; /* TRUE=caller supplies downsampled data */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - int smoothing_factor; /* 1..100, or 0 for no input smoothing */ - J_DCT_METHOD dct_method; /* DCT algorithm selector */ - - /* The restart interval can be specified in absolute MCUs by setting - * restart_interval, or in MCU rows by setting restart_in_rows - * (in which case the correct restart_interval will be figured - * for each scan). - */ - unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ - int restart_in_rows; /* if > 0, MCU rows per restart interval */ - - /* Parameters controlling emission of special markers. */ - - boolean write_JFIF_header; /* should a JFIF marker be written? */ - /* These three values are not used by the JPEG code, merely copied */ - /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ - /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ - /* ratio is defined by X_density/Y_density even when density_unit=0. */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean write_Adobe_marker; /* should an Adobe marker be written? */ - - /* State variable: index of next scanline to be written to - * jpeg_write_scanlines(). Application may use this to control its - * processing loop, e.g., "while (next_scanline < image_height)". - */ - - JDIMENSION next_scanline; /* 0 .. image_height-1 */ - - /* Remaining fields are known throughout compressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during compression startup - */ - boolean progressive_mode; /* TRUE if scan script uses progressive mode */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ - /* The coefficient controller receives data in units of MCU rows as defined - * for fully interleaved scans (whether the JPEG file is interleaved or not). - * There are v_samp_factor * DCTSIZE sample rows of each component in an - * "iMCU" (interleaved MCU) row. - */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[C_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* - * Links to compression subobjects (methods and private variables of modules) - */ - struct jpeg_comp_master * master; - struct jpeg_c_main_controller * main; - struct jpeg_c_prep_controller * prep; - struct jpeg_c_coef_controller * coef; - struct jpeg_marker_writer * marker; - struct jpeg_color_converter * cconvert; - struct jpeg_downsampler * downsample; - struct jpeg_forward_dct * fdct; - struct jpeg_entropy_encoder * entropy; -}; - - -/* Master record for a decompression instance */ - -struct jpeg_decompress_struct { - jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ - - /* Source of compressed data */ - struct jpeg_source_mgr * src; - - /* Basic description of image --- filled in by jpeg_read_header(). */ - /* Application may inspect these values to decide how to process image. */ - - JDIMENSION image_width; /* nominal image width (from SOF marker) */ - JDIMENSION image_height; /* nominal image height */ - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - /* Decompression processing parameters --- these fields must be set before - * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes - * them to default values. - */ - - J_COLOR_SPACE out_color_space; /* colorspace for output */ - - unsigned int scale_num, scale_denom; /* fraction by which to scale image */ - - double output_gamma; /* image gamma wanted in output */ - - boolean buffered_image; /* TRUE=multiple output passes */ - boolean raw_data_out; /* TRUE=downsampled data wanted */ - - J_DCT_METHOD dct_method; /* IDCT algorithm selector */ - boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ - boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ - - boolean quantize_colors; /* TRUE=colormapped output wanted */ - /* the following are ignored if not quantize_colors: */ - J_DITHER_MODE dither_mode; /* type of color dithering to use */ - boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ - int desired_number_of_colors; /* max # colors to use in created colormap */ - /* these are significant only in buffered-image mode: */ - boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ - boolean enable_external_quant;/* enable future use of external colormap */ - boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ - - /* Description of actual output image that will be returned to application. - * These fields are computed by jpeg_start_decompress(). - * You can also use jpeg_calc_output_dimensions() to determine these values - * in advance of calling jpeg_start_decompress(). - */ - - JDIMENSION output_width; /* scaled image width */ - JDIMENSION output_height; /* scaled image height */ - int out_color_components; /* # of color components in out_color_space */ - int output_components; /* # of color components returned */ - /* output_components is 1 (a colormap index) when quantizing colors; - * otherwise it equals out_color_components. - */ - int rec_outbuf_height; /* min recommended height of scanline buffer */ - /* If the buffer passed to jpeg_read_scanlines() is less than this many rows - * high, space and time will be wasted due to unnecessary data copying. - * Usually rec_outbuf_height will be 1 or 2, at most 4. - */ - - /* When quantizing colors, the output colormap is described by these fields. - * The application can supply a colormap by setting colormap non-NULL before - * calling jpeg_start_decompress; otherwise a colormap is created during - * jpeg_start_decompress or jpeg_start_output. - * The map has out_color_components rows and actual_number_of_colors columns. - */ - int actual_number_of_colors; /* number of entries in use */ - JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ - - /* State variables: these variables indicate the progress of decompression. - * The application may examine these but must not modify them. - */ - - /* Row index of next scanline to be read from jpeg_read_scanlines(). - * Application may use this to control its processing loop, e.g., - * "while (output_scanline < output_height)". - */ - JDIMENSION output_scanline; /* 0 .. output_height-1 */ - - /* Current input scan number and number of iMCU rows completed in scan. - * These indicate the progress of the decompressor input side. - */ - int input_scan_number; /* Number of SOS markers seen so far */ - JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ - - /* The "output scan number" is the notional scan being displayed by the - * output side. The decompressor will not allow output scan/row number - * to get ahead of input scan/row, but it can fall arbitrarily far behind. - */ - int output_scan_number; /* Nominal scan number being displayed */ - JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ - - /* Current progression status. coef_bits[c][i] indicates the precision - * with which component c's DCT coefficient i (in zigzag order) is known. - * It is -1 when no data has yet been received, otherwise it is the point - * transform (shift) value for the most recent scan of the coefficient - * (thus, 0 at completion of the progression). - * This pointer is NULL when reading a non-progressive file. - */ - int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ - - /* Internal JPEG parameters --- the application usually need not look at - * these fields. Note that the decompressor output side may not use - * any parameters that can change between scans. - */ - - /* Quantization and Huffman tables are carried forward across input - * datastreams when processing abbreviated JPEG datastreams. - */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - /* These parameters are never carried across datastreams, since they - * are given in SOF/SOS markers or defined to be reset by SOI. - */ - - int data_precision; /* bits of precision in image data */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ - - /* These fields record data obtained from optional markers recognized by - * the JPEG library. - */ - boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ - /* Data copied from JFIF marker: */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ - UINT8 Adobe_transform; /* Color transform code from Adobe marker */ - - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - - /* Remaining fields are known throughout decompressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during decompression startup - */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ - /* The coefficient controller's input and output progress is measured in - * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows - * in fully interleaved JPEG scans, but are used whether the scan is - * interleaved or not. We define an iMCU row as v_samp_factor DCT block - * rows of each component. Therefore, the IDCT output contains - * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. - */ - - JSAMPLE * sample_range_limit; /* table for fast range-limiting */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - * Note that the decompressor output side must not use these fields. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[D_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* This field is shared between entropy decoder and marker parser. - * It is either zero or the code of a JPEG marker that has been - * read from the data source, but has not yet been processed. - */ - int unread_marker; - - /* - * Links to decompression subobjects (methods, private variables of modules) - */ - struct jpeg_decomp_master * master; - struct jpeg_d_main_controller * main; - struct jpeg_d_coef_controller * coef; - struct jpeg_d_post_controller * post; - struct jpeg_input_controller * inputctl; - struct jpeg_marker_reader * marker; - struct jpeg_entropy_decoder * entropy; - struct jpeg_inverse_dct * idct; - struct jpeg_upsampler * upsample; - struct jpeg_color_deconverter * cconvert; - struct jpeg_color_quantizer * cquantize; -}; - - -/* "Object" declarations for JPEG modules that may be supplied or called - * directly by the surrounding application. - * As with all objects in the JPEG library, these structs only define the - * publicly visible methods and state variables of a module. Additional - * private fields may exist after the public ones. - */ - - -/* Error handler object */ - -struct jpeg_error_mgr { - /* Error exit handler: does not return to caller */ - JMETHOD(void, error_exit, (j_common_ptr cinfo)); - /* Conditionally emit a trace or warning message */ - JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); - /* Routine that actually outputs a trace or error message */ - JMETHOD(void, output_message, (j_common_ptr cinfo)); - /* Format a message string for the most recent JPEG error or message */ - JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); -#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ - /* Reset error state variables at start of a new image */ - JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); - - /* The message ID code and any parameters are saved here. - * A message can have one string parameter or up to 8 int parameters. - */ - int msg_code; -#define JMSG_STR_PARM_MAX 80 - union { - int i[8]; - char s[JMSG_STR_PARM_MAX]; - } msg_parm; - - /* Standard state variables for error facility */ - - int trace_level; /* max msg_level that will be displayed */ - - /* For recoverable corrupt-data errors, we emit a warning message, - * but keep going unless emit_message chooses to abort. emit_message - * should count warnings in num_warnings. The surrounding application - * can check for bad data by seeing if num_warnings is nonzero at the - * end of processing. - */ - long num_warnings; /* number of corrupt-data warnings */ - - /* These fields point to the table(s) of error message strings. - * An application can change the table pointer to switch to a different - * message list (typically, to change the language in which errors are - * reported). Some applications may wish to add additional error codes - * that will be handled by the JPEG library error mechanism; the second - * table pointer is used for this purpose. - * - * First table includes all errors generated by JPEG library itself. - * Error code 0 is reserved for a "no such error string" message. - */ - const char * const * jpeg_message_table; /* Library errors */ - int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ - /* Second table can be added by application (see cjpeg/djpeg for example). - * It contains strings numbered first_addon_message..last_addon_message. - */ - const char * const * addon_message_table; /* Non-library errors */ - int first_addon_message; /* code for first string in addon table */ - int last_addon_message; /* code for last string in addon table */ -}; - - -/* Progress monitor object */ - -struct jpeg_progress_mgr { - JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); - - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -}; - - -/* Data destination object for compression */ - -struct jpeg_destination_mgr { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - - JMETHOD(void, init_destination, (j_compress_ptr cinfo)); - JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); - JMETHOD(void, term_destination, (j_compress_ptr cinfo)); -}; - - -/* Data source object for decompression */ - -struct jpeg_source_mgr { - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - - JMETHOD(void, init_source, (j_decompress_ptr cinfo)); - JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); - JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); - JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); - JMETHOD(void, term_source, (j_decompress_ptr cinfo)); -}; - - -/* Memory manager object. - * Allocates "small" objects (a few K total), "large" objects (tens of K), - * and "really big" objects (virtual arrays with backing store if needed). - * The memory manager does not allow individual objects to be freed; rather, - * each created object is assigned to a pool, and whole pools can be freed - * at once. This is faster and more convenient than remembering exactly what - * to free, especially where malloc()/free() are not too speedy. - * NB: alloc routines never return NULL. They exit to error_exit if not - * successful. - */ - -#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ -#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ -#define JPOOL_NUMPOOLS 2 - -typedef struct jvirt_sarray_control * jvirt_sarray_ptr; -typedef struct jvirt_barray_control * jvirt_barray_ptr; - - -struct jpeg_memory_mgr { - /* Method pointers */ - JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, - JDIMENSION numrows)); - JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, - JDIMENSION numrows)); - JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION samplesperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION blocksperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); - JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, - jvirt_sarray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, - jvirt_barray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); - JMETHOD(void, self_destruct, (j_common_ptr cinfo)); - - /* Limit on memory allocation for this JPEG object. (Note that this is - * merely advisory, not a guaranteed maximum; it only affects the space - * used for virtual-array buffers.) May be changed by outer application - * after creating the JPEG object. - */ - long max_memory_to_use; -}; - - -/* Routine signature for application-supplied marker processing methods. - * Need not pass marker code since it is stored in cinfo->unread_marker. - */ -typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); - - -/* Declarations for routines called by application. - * The JPP macro hides prototype parameters from compilers that can't cope. - * Note JPP requires double parentheses. - */ - -#ifdef HAVE_PROTOTYPES -#define JPP(arglist) arglist -#else -#define JPP(arglist) () -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. - * We shorten external names to be unique in the first six letters, which - * is good enough for all known systems. - * (If your compiler itself needs names to be unique in less than 15 - * characters, you are out of luck. Get a better compiler.) - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_error jStdError -#define jpeg_create_compress jCreaCompress -#define jpeg_create_decompress jCreaDecompress -#define jpeg_destroy_compress jDestCompress -#define jpeg_destroy_decompress jDestDecompress -#define jpeg_stdio_dest jStdDest -#define jpeg_stdio_src jStdSrc -#define jpeg_set_defaults jSetDefaults -#define jpeg_set_colorspace jSetColorspace -#define jpeg_default_colorspace jDefColorspace -#define jpeg_set_quality jSetQuality -#define jpeg_set_linear_quality jSetLQuality -#define jpeg_add_quant_table jAddQuantTable -#define jpeg_quality_scaling jQualityScaling -#define jpeg_simple_progression jSimProgress -#define jpeg_suppress_tables jSuppressTables -#define jpeg_alloc_quant_table jAlcQTable -#define jpeg_alloc_huff_table jAlcHTable -#define jpeg_start_compress jStrtCompress -#define jpeg_write_scanlines jWrtScanlines -#define jpeg_finish_compress jFinCompress -#define jpeg_write_raw_data jWrtRawData -#define jpeg_write_marker jWrtMarker -#define jpeg_write_tables jWrtTables -#define jpeg_read_header jReadHeader -#define jpeg_start_decompress jStrtDecompress -#define jpeg_read_scanlines jReadScanlines -#define jpeg_finish_decompress jFinDecompress -#define jpeg_read_raw_data jReadRawData -#define jpeg_has_multiple_scans jHasMultScn -#define jpeg_start_output jStrtOutput -#define jpeg_finish_output jFinOutput -#define jpeg_input_complete jInComplete -#define jpeg_new_colormap jNewCMap -#define jpeg_consume_input jConsumeInput -#define jpeg_calc_output_dimensions jCalcDimensions -#define jpeg_set_marker_processor jSetMarker -#define jpeg_read_coefficients jReadCoefs -#define jpeg_write_coefficients jWrtCoefs -#define jpeg_copy_critical_parameters jCopyCrit -#define jpeg_abort_compress jAbrtCompress -#define jpeg_abort_decompress jAbrtDecompress -#define jpeg_abort jAbort -#define jpeg_destroy jDestroy -#define jpeg_resync_to_restart jResyncRestart -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Default error-management setup */ -EXTERN struct jpeg_error_mgr *jpeg_std_error JPP((struct jpeg_error_mgr *err)); - -/* Initialization and destruction of JPEG compression objects */ -/* NB: you must set up the error-manager BEFORE calling jpeg_create_xxx */ -EXTERN void jpeg_create_compress JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_create_decompress JPP((j_decompress_ptr cinfo)); -EXTERN void jpeg_destroy_compress JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); - -/* Standard data source and destination managers: stdio streams. */ -/* Caller is responsible for opening the file before and closing after. */ -EXTERN void jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); -EXTERN void jpeg_stdio_src JPP((j_decompress_ptr cinfo, unsigned char *infile)); - -/* Default parameter setup for compression */ -EXTERN void jpeg_set_defaults JPP((j_compress_ptr cinfo)); -/* Compression parameter setup aids */ -EXTERN void jpeg_set_colorspace JPP((j_compress_ptr cinfo, - J_COLOR_SPACE colorspace)); -EXTERN void jpeg_default_colorspace JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, - boolean force_baseline)); -EXTERN void jpeg_set_linear_quality JPP((j_compress_ptr cinfo, - int scale_factor, - boolean force_baseline)); -EXTERN void jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, - boolean force_baseline)); -EXTERN int jpeg_quality_scaling JPP((int quality)); -EXTERN void jpeg_simple_progression JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_suppress_tables JPP((j_compress_ptr cinfo, - boolean suppress)); -EXTERN JQUANT_TBL * jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); -EXTERN JHUFF_TBL * jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); - -/* Main entry points for compression */ -EXTERN void jpeg_start_compress JPP((j_compress_ptr cinfo, - boolean write_all_tables)); -EXTERN JDIMENSION jpeg_write_scanlines JPP((j_compress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION num_lines)); -EXTERN void jpeg_finish_compress JPP((j_compress_ptr cinfo)); - -/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ -EXTERN JDIMENSION jpeg_write_raw_data JPP((j_compress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION num_lines)); - -/* Write a special marker. See libjpeg.doc concerning safe usage. */ -EXTERN void jpeg_write_marker JPP((j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen)); - -/* Alternate compression function: just write an abbreviated table file */ -EXTERN void jpeg_write_tables JPP((j_compress_ptr cinfo)); - -/* Decompression startup: read start of JPEG datastream to see what's there */ -EXTERN int jpeg_read_header JPP((j_decompress_ptr cinfo, - boolean require_image)); -/* Return value is one of: */ -#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ -#define JPEG_HEADER_OK 1 /* Found valid image datastream */ -#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ -/* If you pass require_image = TRUE (normal case), you need not check for - * a TABLES_ONLY return code; an abbreviated file will cause an error exit. - * JPEG_SUSPENDED is only possible if you use a data source module that can - * give a suspension return (the stdio source module doesn't). - */ - -/* Main entry points for decompression */ -EXTERN boolean jpeg_start_decompress JPP((j_decompress_ptr cinfo)); -EXTERN JDIMENSION jpeg_read_scanlines JPP((j_decompress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION max_lines)); -EXTERN boolean jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); - -/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ -EXTERN JDIMENSION jpeg_read_raw_data JPP((j_decompress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION max_lines)); - -/* Additional entry points for buffered-image mode. */ -EXTERN boolean jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); -EXTERN boolean jpeg_start_output JPP((j_decompress_ptr cinfo, - int scan_number)); -EXTERN boolean jpeg_finish_output JPP((j_decompress_ptr cinfo)); -EXTERN boolean jpeg_input_complete JPP((j_decompress_ptr cinfo)); -EXTERN void jpeg_new_colormap JPP((j_decompress_ptr cinfo)); -EXTERN int jpeg_consume_input JPP((j_decompress_ptr cinfo)); -/* Return value is one of: */ -/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ -#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ -#define JPEG_REACHED_EOI 2 /* Reached end of image */ -#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ -#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ - -/* Precalculate output dimensions for current decompression parameters. */ -EXTERN void jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); - -/* Install a special processing method for COM or APPn markers. */ -EXTERN void jpeg_set_marker_processor JPP((j_decompress_ptr cinfo, - int marker_code, - jpeg_marker_parser_method routine)); - -/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ -EXTERN jvirt_barray_ptr * jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); -EXTERN void jpeg_write_coefficients JPP((j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays)); -EXTERN void jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, - j_compress_ptr dstinfo)); - -/* If you choose to abort compression or decompression before completing - * jpeg_finish_(de)compress, then you need to clean up to release memory, - * temporary files, etc. You can just call jpeg_destroy_(de)compress - * if you're done with the JPEG object, but if you want to clean it up and - * reuse it, call this: - */ -EXTERN void jpeg_abort_compress JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); - -/* Generic versions of jpeg_abort and jpeg_destroy that work on either - * flavor of JPEG object. These may be more convenient in some places. - */ -EXTERN void jpeg_abort JPP((j_common_ptr cinfo)); -EXTERN void jpeg_destroy JPP((j_common_ptr cinfo)); - -/* Default restart-marker-resync procedure for use by data source modules */ -EXTERN boolean jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, - int desired)); - - -/* These marker codes are exported since applications and data source modules - * are likely to want to use them. - */ - -#define JPEG_RST0 0xD0 /* RST0 marker code */ -#define JPEG_EOI 0xD9 /* EOI marker code */ -#define JPEG_APP0 0xE0 /* APP0 marker code */ -#define JPEG_COM 0xFE /* COM marker code */ - - -/* If we have a brain-damaged compiler that emits warnings (or worse, errors) - * for structure definitions that are never filled in, keep it quiet by - * supplying dummy definitions for the various substructures. - */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -struct jpeg_comp_master { long dummy; }; -struct jpeg_c_main_controller { long dummy; }; -struct jpeg_c_prep_controller { long dummy; }; -struct jpeg_c_coef_controller { long dummy; }; -struct jpeg_marker_writer { long dummy; }; -struct jpeg_color_converter { long dummy; }; -struct jpeg_downsampler { long dummy; }; -struct jpeg_forward_dct { long dummy; }; -struct jpeg_entropy_encoder { long dummy; }; -struct jpeg_decomp_master { long dummy; }; -struct jpeg_d_main_controller { long dummy; }; -struct jpeg_d_coef_controller { long dummy; }; -struct jpeg_d_post_controller { long dummy; }; -struct jpeg_input_controller { long dummy; }; -struct jpeg_marker_reader { long dummy; }; -struct jpeg_entropy_decoder { long dummy; }; -struct jpeg_inverse_dct { long dummy; }; -struct jpeg_upsampler { long dummy; }; -struct jpeg_color_deconverter { long dummy; }; -struct jpeg_color_quantizer { long dummy; }; -#endif /* JPEG_INTERNALS */ -#endif /* INCOMPLETE_TYPES_BROKEN */ - - -/* - * The JPEG library modules define JPEG_INTERNALS before including this file. - * The internal structure declarations are read only when that is true. - * Applications using the library should not include jpegint.h, but may wish - * to include jerror.h. - */ - -#ifdef JPEG_INTERNALS -#include "jpegint.h" /* fetch private declarations */ -#include "jerror.h" /* fetch error codes too */ -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* JPEGLIB_H */ +/* + * jpeglib.h + * + * Copyright (C) 1991-1995, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +#ifdef __cplusplus +extern "C" +{ +#endif + + + +#ifdef __MACOS__ + +// JDC: stuff to make mac version compile +#define boolean qboolean +#define register +#define INT32 int + +#endif + +// rad additions +// 11.29.99 + +//#include "cmdlib.h" +#ifdef _WIN32 +#include "windows.h" +#include "stdio.h" +#endif + +#ifndef INT32 +#define INT32 int +#endif + +extern void LoadJPGBuff(unsigned char *fbuffer, unsigned char **pic, int *width, int *height ); +// rad end + + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jpeg6/jconfig.h" /* widely used configuration options */ +#endif +#include "jpeg6/jmorecfg.h" /* seldom changed options */ + + +/* Version ID for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". + */ + +#define JPEG_LIB_VERSION 60 /* Version 6 */ + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This field directly represents the contents of a JPEG DQT marker. + * Note: the values are always given in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples. Always DCTSIZE for compression. + * For decompression this is the size of the output from one DCT block, + * reflecting any scaling we choose to apply during the IDCT step. + * Values of 1,2,4,8 are likely to be supported. Note that different + * components may receive different IDCT scalings. + */ + int DCT_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface), thus + * downsampled_width = ceil(image_width * Hi/Hmax) + * and similarly for height. For decompression, IDCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is not currently used by the compressor. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + boolean is_decompressor; /* so common code can tell which is which */\ + int global_state /* for checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker: */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(void, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_create_compress jCreaCompress +#define jpeg_create_decompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN struct jpeg_error_mgr *jpeg_std_error JPP((struct jpeg_error_mgr *err)); + +/* Initialization and destruction of JPEG compression objects */ +/* NB: you must set up the error-manager BEFORE calling jpeg_create_xxx */ +EXTERN void jpeg_create_compress JPP((j_compress_ptr cinfo)); +EXTERN void jpeg_create_decompress JPP((j_decompress_ptr cinfo)); +EXTERN void jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN void jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN void jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN void jpeg_stdio_src JPP((j_decompress_ptr cinfo, unsigned char *infile)); + +/* Default parameter setup for compression */ +EXTERN void jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN void jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN void jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN void jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN void jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN void jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN int jpeg_quality_scaling JPP((int quality)); +EXTERN void jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN void jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN JQUANT_TBL * jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN JHUFF_TBL * jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN void jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN JDIMENSION jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN void jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN JDIMENSION jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.doc concerning safe usage. */ +EXTERN void jpeg_write_marker JPP((j_compress_ptr cinfo, int marker, + const JOCTET *dataptr, unsigned int datalen)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN void jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN int jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN boolean jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN JDIMENSION jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN boolean jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN JDIMENSION jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN boolean jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN boolean jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN boolean jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN boolean jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN void jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN int jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN void jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN void jpeg_set_marker_processor JPP((j_decompress_ptr cinfo, + int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN jvirt_barray_ptr * jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN void jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN void jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN void jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN void jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN void jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN void jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN boolean jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* JPEGLIB_H */ diff --git a/libs/pak/pak.vcproj b/libs/pak/pak.vcproj index bf74cae..196a45a 100755 --- a/libs/pak/pak.vcproj +++ b/libs/pak/pak.vcproj @@ -1,173 +1,173 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/libs/pak/pakstuff.cpp b/libs/pak/pakstuff.cpp index a4e1dc7..011c27d 100755 --- a/libs/pak/pakstuff.cpp +++ b/libs/pak/pakstuff.cpp @@ -19,1191 +19,1191 @@ along with Foobar; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA =========================================================================== */ - -#include -#include -#include -#include -#include -#include "io.h" -#include "pakstuff.h" -#include "unzip.h" -//#include "cmdlib.h" -#include "str.h" - -int m_nPAKIndex; -FILE* pakfile[16]; -struct PACKDirectory pakdir; -PACKDirPtr pakdirptr = &pakdir; -UInt16 dirsize; -boolean pakopen = false; -int f_type; -DIRECTORY *paktextures = NULL; -boolean HavePakColormap; -UInt32 PakColormapOffset; -UInt32 PakColormapSize; -DIRECTORY *dirhead = NULL; -boolean g_bPK3 = false; -char g_strBasePath[1024]; - -struct PK3FileInfo -{ - unzFile m_zFile; - char *m_pName; - unz_s m_zInfo; - long m_lSize; - ~PK3FileInfo() - { - delete []m_pName; - } - bool operator ==(const PK3FileInfo& rhs) const { return strcmp(m_pName, rhs.m_pName) == 0; } -}; - -#define __PATHSEPERATOR '/' - -#define LOG_PAKFAIL - -#ifdef LOG_PAKFAIL - -class LogFile -{ -public: - FILE *m_pFile; - LogFile(const char* pName) - { - m_pFile = fopen(pName, "w"); - } - ~LogFile() - { - if (m_pFile) - { - fclose(m_pFile); - } - } - void Log(const char *pFormat, ...) - { - va_list arg_ptr; - va_start(arg_ptr, pFormat); - fprintf(m_pFile, pFormat, arg_ptr); - va_end(arg_ptr); - } -}; - -LogFile g_LogFile("c:\\paklog.txt"); -#endif - -template class StrPtr : public Str -{ -protected: - T* m_pPtr; - StrPtr() - { - m_pPtr = NULL; - } - - StrPtr(const char *pStr, T *p) : Str(pStr) - { - m_pPtr = p; - } - - T* Ptr() - { - return m_pPtr; - } - - T& Ref() - { - return *m_pPtr; - } - - -}; -// PtrList -// a list of ptrs -// -template class PtrList -{ -protected: - T *m_pPtr; - PtrList *m_pNext; - -public: - - PtrList() - { - m_pNext = NULL; - m_pPtr = NULL; - } - - PtrList(T *ip) - { - m_pNext = NULL; - m_pPtr = ip; - } - - ~PtrList() - { - delete m_pPtr; - } - - PtrList* Next() - { - return m_pNext; - } - - void Add(T *ip) - { - PtrList *pl = this; - while (pl && pl->m_pNext) - { - pl = pl->Next(); - } - pl->m_pNext = new PtrList(ip); - } - - void Remove() - { - PtrList *p = m_pNext; - if (p) - { - while (p->m_pNext != this && p->m_pNext != NULL) - { - p = p->m_pNext; - } - if (p->m_pNext == this) - { - p->m_pNext = m_pNext; - } - } - } - - virtual PtrList* Find(T *ip) - { - PtrList *p = m_pNext; - while (p) - { - if (*p->m_pPtr == *ip) - { - return p; - } - p = p->m_pNext; - } - return NULL; - } - - // remove vp from the list - void Remove(T *ip) - { - PtrList *p = Find(ip); - if (p) - { - p->Remove(); - } - } - - T* Ptr() - { - return m_pPtr; - } - - T& Ref() - { - return *m_pPtr; - } - - void RemoveAll() - { - PtrList *p = m_pNext; - while (p) - { - PtrList *p2 = p; - p = p->m_pNext; - delete p2; - } - } -}; - - -typedef PtrList ZFileList; -typedef PtrList StrList; -typedef PtrList PK3List; - - -StrList g_PK3TexturePaths; -PK3List g_PK3Files; -ZFileList g_zFiles; -#define WORK_LEN 1024 -#define TEXTURE_PATH "textures" -#define PATH_SEPERATORS "/\\:\0" - - -char* __StrDup(char* pStr) -{ - if (pStr) - { - return strcpy(new char[strlen(pStr)+1], pStr); - } - return NULL; -} - -char* __StrDup(const char* pStr) -{ - if (pStr) - { - return strcpy(new char[strlen(pStr)+1], pStr); - } - return NULL; -} - -#define MEM_BLOCKSIZE 4096 -void* __qblockmalloc(size_t nSize) -{ - void *b; - // round up to threshold - int nAllocSize = nSize % MEM_BLOCKSIZE; - if ( nAllocSize > 0) - { - nSize += MEM_BLOCKSIZE - nAllocSize; - } - b = malloc(nSize + 1); - memset (b, 0, nSize); - return b; -} - -void* __qmalloc (size_t nSize) -{ - void *b; - b = malloc(nSize + 1); - memset (b, 0, nSize); - return b; -} - - -/* -==================== -Extract file parts -==================== -*/ -void __ExtractFilePath (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a \ or the start -// - while (src != path && *(src-1) != __PATHSEPERATOR) - src--; - - memcpy (dest, path, src-path); - dest[src-path] = 0; -} - -void __ExtractFileName (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a \ or the start -// - while (src != path && *(src-1) != '/' - && *(src-1) != '\\' ) - src--; - - while (*src) - { - *dest++ = *src++; - } - *dest = 0; -} - -void __ExtractFileBase (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a \ or the start -// - while (src != path && *(src-1) != '/' - && *(src-1) != '\\' ) - src--; - - while (*src && *src != '.') - { - *dest++ = *src++; - } - *dest = 0; -} - -void __ExtractFileExtension (const char *path, char *dest) -{ - const char *src; - - src = path + strlen(path) - 1; - -// -// back up until a . or the start -// - while (src != path && *(src-1) != '.') - src--; - if (src == path) - { - *dest = 0; // no extension - return; - } - - strcpy (dest,src); -} - - -void __ConvertDOSToUnixName( char *dst, const char *src ) -{ - while ( *src ) - { - if ( *src == '\\' ) - *dst = '/'; - else - *dst = *src; - dst++; src++; - } - *dst = 0; -} - - - - - -void AddSlash(Str& str) -{ - int nLen = str.GetLength(); - if (nLen > 0) - { - if (str[nLen-1] != '\\' && str[nLen-1] != '/') - str += '\\'; - } -} - -void FindReplace(Str& strContents, const char* pTag, const char* pValue) -{ - if (strcmp(pTag, pValue) == 0) - return; - for (int nPos = strContents.Find(pTag); nPos >= 0; nPos = strContents.Find(pTag)) - { - int nRightLen = strContents.GetLength() - strlen(pTag) - nPos; - Str strLeft(strContents.Left(nPos)); - Str strRight(strContents.Right(nRightLen)); - strLeft += pValue; - strLeft += strRight; - strContents = strLeft; - } -} - - - - - -void ProgError(char *errstr, ...) -{ - va_list args; - - va_start(args, errstr); - printf("\nProgram Error: *** "); - vprintf(errstr, args); - printf(" ***\n"); - va_end(args); - exit(5); -} - -boolean ReadBytes(FILE *file, void *addr, UInt32 size) -{ - while (size > 0x8000) - { - if (fread(addr, 1, 0x8000, file) != 0x8000) - return false; - addr = (char *)addr + 0x8000; - size -= 0x8000; - } - if (fread(addr, 1, size, file) != size) - return false; - return true; -} -int ReadMagic(FILE *file) -{ - UInt8 buf[4]; - - if (ReadBytes(file, buf, 4) == FALSE) - return FTYPE_ERROR; - if (!strncmp(reinterpret_cast(&buf[0]), "IWAD", 4)) - return FTYPE_IWAD; - if (!strncmp(reinterpret_cast(&buf[0]), "PWAD", 4)) - return FTYPE_PWAD; - if (!strncmp(reinterpret_cast(&buf[0]), "PACK", 4)) - return FTYPE_PACK; - if (!strncmp(reinterpret_cast(&buf[0]), "WAD2", 4)) - return FTYPE_WAD2; - if (buf[0] == 0x17 && buf[1] == 0 && buf[2] == 0 && buf[3] == 0) - return FTYPE_BSP; - if (!strncmp(reinterpret_cast(&buf[0]), "IDPO", 4)) - return FTYPE_MODEL; - if (!strncmp(reinterpret_cast(&buf[0]), "IDSP", 4)) - return FTYPE_SPRITE; - if (!strncmp(reinterpret_cast(&buf[0]), "RIFF", 4)) - return FTYPE_WAV; - if (!strncmp(reinterpret_cast(&buf[0]), ".snd", 4)) - return FTYPE_AU; - if (buf[0] == 'P') - { - if (buf[1] == '1') - return FTYPE_PBM_ASC; - if (buf[1] == '2') - return FTYPE_PGM_ASC; - if (buf[1] == '3') - return FTYPE_PPM_ASC; - if (buf[1] == '4') - return FTYPE_PBM_RAW; - if (buf[1] == '5') - return FTYPE_PGM_RAW; - if (buf[1] == '6') - return FTYPE_PPM_RAW; - } - if (buf[0] == 'B' && buf[1] == 'M') - return FTYPE_BMP; - if (!strncmp(reinterpret_cast(&buf[0]), "GIF8", 4)) - return FTYPE_GIF; - if (buf[0] == 0x0a && buf[1] == 0x05 && buf[2] == 0x01 && buf[3] == 0x08) - return FTYPE_PCX; - return FTYPE_UNKNOWN; -} -FILE *OpenFileReadMagic(const char *filename, int *ftype_r) -{ - FILE *f; - - *ftype_r = FTYPE_ERROR; - if ((f = fopen(filename, "rb")) == NULL) - return NULL; - *ftype_r = ReadMagic(f); - if (*ftype_r == FTYPE_ERROR) - { - fclose(f); - return NULL; - } - return f; -} -boolean WriteBytes(FILE *file, void *addr, UInt32 size) -{ - while (size > 0x8000) - { - if (fwrite(addr, 1, 0x8000, file) != 0x8000) - return FALSE; - addr = (char *)addr + 0x8000; - size -= 0x8000; - } - if (fwrite(addr, 1, size, file) != size) - return FALSE; - return TRUE; -} -char *ConvertFilePath(char *filename) -{ - char *cp; - - if (filename == NULL) - ProgError("BUG: cannot convert a NULL pathname"); - for (cp = filename; *cp; cp++) - if (*cp == '/' || *cp == '\\') - { -#ifdef QEU_DOS - *cp = '\\'; -#else - *cp = '/'; -#endif - } - return filename; -} - -/* - * Read the PACK directory into memory. The optional offset to the - * start of the PACK file is given in "offset". The number of files in - * the directory is returned in *dirsize_r. - */ -PACKDirPtr ReadPACKDirectory(FILE *packfile, UInt32 offset, UInt16 *dirsize_r) -{ - PACKDirPtr dir; - UInt32 pos, size; - UInt16 max, i; - - *dirsize_r = 0; - if (packfile == NULL) - return NULL; - if ((fseek(packfile, offset, SEEK_SET) < 0) - || (ReadMagic(packfile) != FTYPE_PACK) - || (ReadInt32(packfile, &pos) == FALSE) - || (ReadInt32(packfile, &size) == FALSE) - || (size == 0L) - || (size / sizeof(struct PACKDirectory) > 65535L) - || (fseek(packfile, offset + pos, SEEK_SET) < 0)) - return NULL; - dir = (PACKDirPtr)__qmalloc(size); - max = (UInt16)(size / sizeof(struct PACKDirectory)); - for (i = 0; i < max; i++) - { - if (ReadBytes(packfile, &dir[i], sizeof(struct PACKDirectory)) == FALSE) - { - free(dir); - return NULL; - } - ConvertFilePath(dir[i].name); - dir[i].offset = SwapInt32(dir[i].offset); - dir[i].size = SwapInt32(dir[i].size); - } - *dirsize_r = max; - return dir; -} - -/* - * Print the contents of the PACK directory in "outf". - */ -void DumpPACKDirectory(FILE *outf, PACKDirPtr dir, UInt16 dirsize) -{ - UInt16 i; - UInt32 sum; - char buf[57]; - - if (outf == NULL || dir == NULL || dirsize == 0) - return; - fprintf(outf, "num offset size file name\n"); - fprintf(outf, " (hex) (dec)\n"); - sum = 0L; - for (i = 0; i < dirsize; i++) - { - if(!strnicmp(dir[i].name, "textures", 8)) - { - strncpy(buf, dir[i].name, 56); - buf[56] = '\0'; - fprintf(outf, "%3u 0x%08lx %6ld %s\n", - i, dir[i].offset, dir[i].size, buf); - sum += dir[i].size; - } - } - fprintf(outf, "\nTotal size for %3u entries: %7lu bytes.\n", dirsize, sum); - fprintf(outf, "Size of the PACK directory: %7lu bytes.\n", - (UInt32)dirsize * (UInt32)sizeof(struct PACKDirectory)); - fprintf(outf, "Total (header + data + dir): %7lu bytes.\n", - 12L + sum + (UInt32)dirsize * (UInt32)sizeof(struct PACKDirectory)); -} - -void ClearFileList(FILELIST **list) -{ - FILELIST *temp; - - while(*list) - { - temp = *list; - *list = (*list)->next; - free(temp); - } -} - -void ClearDirList(DIRLIST **list) -{ - DIRLIST *temp; - - while(*list) - { - temp = *list; - *list = (*list)->next; - free(temp); - } -} - -DIRECTORY *FindPakDir(DIRECTORY *dir, char *name) -{ - DIRECTORY *currentPtr; - - for(currentPtr = dir; currentPtr; currentPtr = currentPtr->next) - { - if(!stricmp(name, currentPtr->name)) - { - return currentPtr; - } - } - return NULL; -} - - -// LoadPK3FileList -// --------------- -// -// This gets passed a file mask which we want to remove as -// we are only interested in the directory name and any given -// extension. Only handles explicit filenames or *.something -// -boolean LoadPK3FileList(FILELIST **filelist, const char *pattern) -{ - char cSearch[WORK_LEN]; - __ConvertDOSToUnixName( cSearch, pattern ); - char cPath[WORK_LEN]; - char cExt[WORK_LEN]; - char cFile[WORK_LEN]; - char cWork[WORK_LEN]; - __ExtractFilePath(pattern, cPath); - __ExtractFileName(pattern, cFile); - __ExtractFileExtension(pattern, cExt); - const char *pCompare = (strnicmp(cFile, "*.", 2) == 0) ? cExt : cFile; - strcpy(cWork, cPath); - sprintf(cPath, "textures/%s", cWork); - - PK3List *p = g_PK3Files.Next(); - while (p != NULL) - { - // qualify the path - PK3FileInfo *pKey = p->Ptr(); - if (strstr(pKey->m_pName, cPath) && strstr(pKey->m_pName, pCompare)) - { - __ExtractFileName(pKey->m_pName, cWork); - AddToFileListAlphabetized(filelist, cWork, 0, 0, false); - } - p = p->Next(); - } - return (*filelist) != NULL; -} - -boolean GetPackFileList(FILELIST **filelist, char *pattern) -{ - char *str1, *str2; - int i; - DIRECTORY *dummy = paktextures; - FILELIST *temp; - - if (!pakopen) - return false; - - if (g_bPK3) - { - return LoadPK3FileList(filelist, pattern); - } - - str1 = pattern; - - for(i = 0; pattern[i] != '\0'; i++) - { - if(pattern[i] == '\\') - pattern[i] = '/'; - } - - while(strchr(str1, '/')) - { - str2 = strchr(str1, '/'); - *str2++ = '\0'; - dummy = FindPakDir(dummy, str1); - if(!dummy) - return false; - str1 = str2; - } - for(temp = dummy->files; temp; temp=temp->next) - { - AddToFileListAlphabetized(filelist, temp->filename, temp->offset, 0, false); - } - return true; -} - -boolean GetPackTextureDirs(DIRLIST **dirlist) -{ - UInt16 i; - char buf[57]; - - if (!pakopen) - return 1; - - if (g_bPK3) - { - StrList *pl = g_PK3TexturePaths.Next(); - while (pl != NULL) - { - AddToDirListAlphabetized(dirlist, pl->Ref(), 0); - pl = pl->Next(); - } - return true; - } - - for (i = 0; i < dirsize; i++) - { - if(!strnicmp(pakdirptr[i].name, "textures", 8)) - { - strncpy(buf, &(pakdirptr[i].name[9]), 46); - if(strchr(buf, '\\')) - *strchr(buf, '\\') = '\0'; - else if(strchr(buf, '/')) - *strchr(buf, '/') = '\0'; - else - buf[56] = '\0'; - - if(strchr(buf, '.')) - continue; - - AddToDirListAlphabetized(dirlist, buf, 0); - } - } - return true; -} - -boolean AddToDirListAlphabetized(DIRLIST **list, char *dirname, int from) -{ - DIRLIST *currentPtr, *previousPtr, *newPtr; - - strlwr(dirname); - for(currentPtr = *list; currentPtr; currentPtr = currentPtr->next) - { - if(!stricmp(dirname, currentPtr->dirname)) - { - return false; - } - } - previousPtr = NULL; - currentPtr = *list; - - if((newPtr = (DIRLIST *)__qmalloc(sizeof(DIRLIST))) == NULL) - return false; - - strcpy(newPtr->dirname, dirname); - newPtr->from = from; - - while(currentPtr != NULL && stricmp(dirname, currentPtr->dirname) > 0) - { - previousPtr = currentPtr; - currentPtr = currentPtr->next; - } //End while - if(previousPtr == NULL) - { - newPtr->next = *list; - *list = newPtr; - } //End if - else - { - previousPtr->next = newPtr; - newPtr->next = currentPtr; - } //End else - return true; -} - -boolean AddToFileListAlphabetized(FILELIST **list, char *filename, UInt32 offset, UInt32 size, boolean dirs) -{ - FILELIST *currentPtr, *previousPtr, *newPtr; - - for(currentPtr = *list; currentPtr; currentPtr = currentPtr->next) - { - if(!stricmp(filename, currentPtr->filename)) - { - return false; - } - } - previousPtr = NULL; - currentPtr = *list; - - if((newPtr = (FILELIST *)__qmalloc(sizeof(FILELIST))) == NULL) - return false; - - strcpy(newPtr->filename, filename); - newPtr->offset = offset; - newPtr->size = size; - - while(currentPtr != NULL && stricmp(filename, currentPtr->filename) > 0) - { - previousPtr = currentPtr; - currentPtr = currentPtr->next; - } //End while - if(previousPtr == NULL) - { - newPtr->next = *list; - *list = newPtr; - } //End if - else - { - previousPtr->next = newPtr; - newPtr->next = currentPtr; - } //End else - return true; -} - -boolean PakLoadFile(const char *filename, void **bufferptr) -{ - FILELIST *p = NULL; - DIRECTORY *dummy; - void *buffer; - char *str1, *str2; - - if(!pakopen) - return false; - - Str str(filename); - __ConvertDOSToUnixName(str, str); - - dummy = paktextures; - str1 = str; - - while(strchr(str1, '/')) - { - str2 = strchr(str1, '/'); - *str2++ = '\0'; - dummy = FindPakDir(dummy, str1); - if(!dummy) - return false; - str1 = str2; - } - - // FIXME: add error handling routines - for(p = dummy->files; p; p = p->next) - { - if(!stricmp(str1, p->filename)) - { - if (fseek(pakfile[m_nPAKIndex], p->offset, SEEK_SET) < 0) - { - //Sys_Printf("Unexpected EOF in pakfile\n"); - return false; - } - if((buffer = __qmalloc(p->size+5)) == NULL) - //Error("Could not allocate memory"); - - if(fread(buffer, 1, p->size, pakfile[m_nPAKIndex]) != p->size) - { - //Sys_Printf("Error reading %s from pak\n", str1); - free(buffer); - return false; - } - *bufferptr = buffer; - return true; - } - } - return false; -} - -int PakLoadAnyFile(const char *filename, void **bufferptr) -{ - char cWork[WORK_LEN]; - if (g_bPK3) - { - PK3FileInfo *pInfo; - Str strKey; - // need to lookup the file without the base/texture path on it - Str strBase(g_strBasePath); - AddSlash(strBase); - __ConvertDOSToUnixName(cWork, strBase); - Str strFile(filename); - __ConvertDOSToUnixName(strFile, strFile); - strFile.MakeLower(); - strlwr(cWork); - FindReplace(strFile, cWork, ""); - - PK3FileInfo infoFind; - infoFind.m_pName = __StrDup(strFile.GetBuffer()); - PK3List *pList = g_PK3Files.Find(&infoFind); - if (pList) - { - pInfo = pList->Ptr(); - memcpy(pInfo->m_zFile, &pInfo->m_zInfo, sizeof(unz_s)); - if (unzOpenCurrentFile(pInfo->m_zFile) == UNZ_OK) - { - void *buffer = __qblockmalloc(pInfo->m_lSize+1); - int n = unzReadCurrentFile(pInfo->m_zFile , buffer, pInfo->m_lSize); - *bufferptr = buffer; - unzCloseCurrentFile(pInfo->m_zFile); - return n; - } - } -#ifdef LOG_PAKFAIL - sprintf(cWork, "PAK failed on %s\n", filename); - g_LogFile.Log(cWork); -#endif - return -1; - } - - for (int i = 0; i < dirsize; i++) - { - if(!stricmp(filename, pakdirptr[i].name)) - { - if (fseek(pakfile[m_nPAKIndex], pakdirptr[i].offset, SEEK_SET) >= 0) - { - void *buffer = __qmalloc (pakdirptr[i].size+1); - ((char *)buffer)[pakdirptr[i].size] = 0; - if (fread(buffer, 1, pakdirptr[i].size, pakfile[m_nPAKIndex]) == pakdirptr[i].size) - { - *bufferptr = buffer; - return pakdirptr[i].size; - } - } - } - } -#ifdef LOG_PAKFAIL - sprintf(cWork, "PAK failed on %s\n", filename); - g_LogFile.Log(cWork); -#endif - return -1; -} - - - -DIRECTORY *AddPakDir(DIRECTORY **dir, char *name) -{ - DIRECTORY *currentPtr, *previousPtr, *newPtr; - - for(currentPtr = *dir; currentPtr; currentPtr = currentPtr->next) - { - if(!stricmp(name, currentPtr->name)) - { - return currentPtr; - } - } - previousPtr = NULL; - currentPtr = *dir; - - if((newPtr = (DIRECTORY *)__qmalloc(sizeof(DIRECTORY))) == NULL) - return NULL; - - strcpy(newPtr->name, name); - newPtr->files = NULL; - - while(currentPtr != NULL && stricmp(name, currentPtr->name) > 0) - { - previousPtr = currentPtr; - currentPtr = currentPtr->next; - } - if(previousPtr == NULL) - { - newPtr->next = *dir; - *dir = newPtr; - } - else - { - previousPtr->next = newPtr; - newPtr->next = currentPtr; - } - return newPtr; -} - - -// OpenPK3 -// ------- -// Opens a PK3 ( or zip ) file and creates a list of filenames -// and zip info structures -// -boolean OpenPK3(const char *filename) -{ - char cFilename[WORK_LEN]; - char cName[WORK_LEN]; - char cWork[WORK_LEN]; - unz_file_info zInfo; - unzFile *zFile = new unzFile(unzOpen(filename)); - g_zFiles.Add(zFile); - if (zFile != NULL) - { - int nStatus = unzGoToFirstFile(*zFile); - while (nStatus == UNZ_OK) - { - cFilename[0] = '\0'; - unzGetCurrentFileInfo(*zFile, &zInfo, cFilename, WORK_LEN, NULL, 0, NULL, 0); - strlwr(cFilename); - __ConvertDOSToUnixName( cWork, cFilename); - if (strstr(cWork, ".") != NULL) - { - PK3FileInfo *pInfo = new PK3FileInfo(); - pInfo->m_pName = __StrDup(cWork); - memcpy(&pInfo->m_zInfo, (unz_s*)*zFile, sizeof(unz_s)); - pInfo->m_lSize = zInfo.uncompressed_size; - pInfo->m_zFile = *zFile; - g_PK3Files.Add(pInfo); - } - char *p = strstr(cFilename, TEXTURE_PATH); - if (p != NULL) - { - // FIXME: path differences per os ? - // catch solo directory entry - if (strlen(p) > strlen(TEXTURE_PATH) + 1) - { - // skip textures + path seperator - p += strlen(TEXTURE_PATH) + 1; - int nEnd = strcspn(p, PATH_SEPERATORS); - strncpy(cName, p, nEnd); - cName[nEnd] = '\0'; - - boolean bFound = false; - StrList *pl = g_PK3TexturePaths.Next(); - while (pl != NULL) - { - if (strcmpi(pl->Ref(), cName) == 0) - { - // already have this, continue - bFound = true; - break; - } - pl = pl->Next(); - } - if (!bFound) - { - g_PK3TexturePaths.Add(new Str(cName)); - } - } - } - nStatus = unzGoToNextFile(*zFile); - } - } - return (zFile != NULL); -} - -void closePK3(unzFile zf) -{ - unzClose(zf); -} - -void OpenPakFile(const char *filename) -{ - int i; - char *str1, *str2; - DIRECTORY *dummy; - - if(!pakopen) - paktextures = NULL; - - HavePakColormap = false; - - Str strTest(filename); - strTest.MakeLower(); - if (strTest.Find("pk3") >= 0 || strTest.Find("zip") >= 0) - { - pakopen = g_bPK3 = OpenPK3(filename); - return; - } - - - if((pakfile[m_nPAKIndex] = OpenFileReadMagic(filename, &f_type)) == NULL) - { - //FIXME: error routine - //Sys_Printf("ERROR: Could not open %s", filename); - return; - } - if(f_type != FTYPE_PACK) - { - //Sys_Printf("ERROR: %s is not a valid pack file", filename); - if(f_type != FTYPE_ERROR) - fclose(pakfile[m_nPAKIndex]); - return; - } - pakdirptr = ReadPACKDirectory(pakfile[m_nPAKIndex], 0, &dirsize); - if (pakdirptr == NULL) - { - //Sys_Printf("ERROR: Could not read pack directory", filename); - fclose(pakfile[m_nPAKIndex]); - return; - } - if (dirsize == 0) - { - fclose(pakfile[m_nPAKIndex]); - return; - } - for (i = 0; i < dirsize; i++) - { - if(!strnicmp("textures/", pakdirptr[i].name, 9)) - { - dummy = paktextures; - str1 = pakdirptr[i].name+9; - while(strchr(str1, '/')) - { - str2 = strchr(str1, '/'); - *str2++ = '\0'; - dummy = AddPakDir(dummy==paktextures?&paktextures:&dummy, str1); - str1 = str2; - } - - AddToFileListAlphabetized(&(dummy->files), str1, pakdirptr[i].offset, pakdirptr[i].size, true); - } - else if(!strnicmp("pics/colormap.pcx", pakdirptr[i].name, 17)) - { - HavePakColormap = true; - PakColormapOffset = pakdirptr[i].offset; - PakColormapSize = pakdirptr[i].size; - } - } - pakopen = true; - -} - -void ClearPaKDir(DIRECTORY **dir) -{ - DIRECTORY *d1 = *dir, *d2; - - while(d1) - { - ClearFileList(&(d1->files)); - d2 = d1; - d1 = d1->next; - free(d2); - } -} - -void CleanUpPakDirs() -{ - ClearPaKDir(&paktextures); - paktextures = NULL; - dirhead = NULL; - g_PK3TexturePaths.RemoveAll(); - g_PK3Files.RemoveAll(); -} - -void ClosePakFile(void) -{ - if(pakopen) - { - if (g_bPK3) - { - ZFileList *p = g_zFiles.Next(); - while (p != NULL) - { - unzFile uz = p->Ref(); - closePK3(uz); - p = p->Next(); - } - } - else - { - fclose(pakfile[m_nPAKIndex]); - } - } - pakopen = false; - CleanUpPakDirs(); -} - - -void WINAPI InitPakFile(const char * pBasePath, const char *pName) -{ - m_nPAKIndex = 0; - pakopen = false; - paktextures = NULL; - strcpy(g_strBasePath, pBasePath); - if (pName == NULL) - { - char cWork[WORK_LEN]; - Str strPath(pBasePath); - AddSlash(strPath); - strPath += "*.pk3"; - bool bGo = true; - struct _finddata_t fileinfo; - int handle = _findfirst (strPath, &fileinfo); - if (handle != -1) - { - do - { - sprintf(cWork, "%s\\%s", pBasePath, fileinfo.name); - OpenPakFile(cWork); - } while (_findnext( handle, &fileinfo ) != -1); - _findclose (handle); - } - } - else - { - OpenPakFile(pName); - } -} - + +#include +#include +#include +#include +#include +#include "io.h" +#include "pakstuff.h" +#include "unzip.h" +//#include "cmdlib.h" +#include "str.h" + +int m_nPAKIndex; +FILE* pakfile[16]; +struct PACKDirectory pakdir; +PACKDirPtr pakdirptr = &pakdir; +UInt16 dirsize; +boolean pakopen = false; +int f_type; +DIRECTORY *paktextures = NULL; +boolean HavePakColormap; +UInt32 PakColormapOffset; +UInt32 PakColormapSize; +DIRECTORY *dirhead = NULL; +boolean g_bPK3 = false; +char g_strBasePath[1024]; + +struct PK3FileInfo +{ + unzFile m_zFile; + char *m_pName; + unz_s m_zInfo; + long m_lSize; + ~PK3FileInfo() + { + delete []m_pName; + } + bool operator ==(const PK3FileInfo& rhs) const { return strcmp(m_pName, rhs.m_pName) == 0; } +}; + +#define __PATHSEPERATOR '/' + +#define LOG_PAKFAIL + +#ifdef LOG_PAKFAIL + +class LogFile +{ +public: + FILE *m_pFile; + LogFile(const char* pName) + { + m_pFile = fopen(pName, "w"); + } + ~LogFile() + { + if (m_pFile) + { + fclose(m_pFile); + } + } + void Log(const char *pFormat, ...) + { + va_list arg_ptr; + va_start(arg_ptr, pFormat); + fprintf(m_pFile, pFormat, arg_ptr); + va_end(arg_ptr); + } +}; + +LogFile g_LogFile("c:\\paklog.txt"); +#endif + +template class StrPtr : public Str +{ +protected: + T* m_pPtr; + StrPtr() + { + m_pPtr = NULL; + } + + StrPtr(const char *pStr, T *p) : Str(pStr) + { + m_pPtr = p; + } + + T* Ptr() + { + return m_pPtr; + } + + T& Ref() + { + return *m_pPtr; + } + + +}; +// PtrList +// a list of ptrs +// +template class PtrList +{ +protected: + T *m_pPtr; + PtrList *m_pNext; + +public: + + PtrList() + { + m_pNext = NULL; + m_pPtr = NULL; + } + + PtrList(T *ip) + { + m_pNext = NULL; + m_pPtr = ip; + } + + ~PtrList() + { + delete m_pPtr; + } + + PtrList* Next() + { + return m_pNext; + } + + void Add(T *ip) + { + PtrList *pl = this; + while (pl && pl->m_pNext) + { + pl = pl->Next(); + } + pl->m_pNext = new PtrList(ip); + } + + void Remove() + { + PtrList *p = m_pNext; + if (p) + { + while (p->m_pNext != this && p->m_pNext != NULL) + { + p = p->m_pNext; + } + if (p->m_pNext == this) + { + p->m_pNext = m_pNext; + } + } + } + + virtual PtrList* Find(T *ip) + { + PtrList *p = m_pNext; + while (p) + { + if (*p->m_pPtr == *ip) + { + return p; + } + p = p->m_pNext; + } + return NULL; + } + + // remove vp from the list + void Remove(T *ip) + { + PtrList *p = Find(ip); + if (p) + { + p->Remove(); + } + } + + T* Ptr() + { + return m_pPtr; + } + + T& Ref() + { + return *m_pPtr; + } + + void RemoveAll() + { + PtrList *p = m_pNext; + while (p) + { + PtrList *p2 = p; + p = p->m_pNext; + delete p2; + } + } +}; + + +typedef PtrList ZFileList; +typedef PtrList StrList; +typedef PtrList PK3List; + + +StrList g_PK3TexturePaths; +PK3List g_PK3Files; +ZFileList g_zFiles; +#define WORK_LEN 1024 +#define TEXTURE_PATH "textures" +#define PATH_SEPERATORS "/\\:\0" + + +char* __StrDup(char* pStr) +{ + if (pStr) + { + return strcpy(new char[strlen(pStr)+1], pStr); + } + return NULL; +} + +char* __StrDup(const char* pStr) +{ + if (pStr) + { + return strcpy(new char[strlen(pStr)+1], pStr); + } + return NULL; +} + +#define MEM_BLOCKSIZE 4096 +void* __qblockmalloc(size_t nSize) +{ + void *b; + // round up to threshold + int nAllocSize = nSize % MEM_BLOCKSIZE; + if ( nAllocSize > 0) + { + nSize += MEM_BLOCKSIZE - nAllocSize; + } + b = malloc(nSize + 1); + memset (b, 0, nSize); + return b; +} + +void* __qmalloc (size_t nSize) +{ + void *b; + b = malloc(nSize + 1); + memset (b, 0, nSize); + return b; +} + + +/* +==================== +Extract file parts +==================== +*/ +void __ExtractFilePath (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a \ or the start +// + while (src != path && *(src-1) != __PATHSEPERATOR) + src--; + + memcpy (dest, path, src-path); + dest[src-path] = 0; +} + +void __ExtractFileName (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a \ or the start +// + while (src != path && *(src-1) != '/' + && *(src-1) != '\\' ) + src--; + + while (*src) + { + *dest++ = *src++; + } + *dest = 0; +} + +void __ExtractFileBase (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a \ or the start +// + while (src != path && *(src-1) != '/' + && *(src-1) != '\\' ) + src--; + + while (*src && *src != '.') + { + *dest++ = *src++; + } + *dest = 0; +} + +void __ExtractFileExtension (const char *path, char *dest) +{ + const char *src; + + src = path + strlen(path) - 1; + +// +// back up until a . or the start +// + while (src != path && *(src-1) != '.') + src--; + if (src == path) + { + *dest = 0; // no extension + return; + } + + strcpy (dest,src); +} + + +void __ConvertDOSToUnixName( char *dst, const char *src ) +{ + while ( *src ) + { + if ( *src == '\\' ) + *dst = '/'; + else + *dst = *src; + dst++; src++; + } + *dst = 0; +} + + + + + +void AddSlash(Str& str) +{ + int nLen = str.GetLength(); + if (nLen > 0) + { + if (str[nLen-1] != '\\' && str[nLen-1] != '/') + str += '\\'; + } +} + +void FindReplace(Str& strContents, const char* pTag, const char* pValue) +{ + if (strcmp(pTag, pValue) == 0) + return; + for (int nPos = strContents.Find(pTag); nPos >= 0; nPos = strContents.Find(pTag)) + { + int nRightLen = strContents.GetLength() - strlen(pTag) - nPos; + Str strLeft(strContents.Left(nPos)); + Str strRight(strContents.Right(nRightLen)); + strLeft += pValue; + strLeft += strRight; + strContents = strLeft; + } +} + + + + + +void ProgError(char *errstr, ...) +{ + va_list args; + + va_start(args, errstr); + printf("\nProgram Error: *** "); + vprintf(errstr, args); + printf(" ***\n"); + va_end(args); + exit(5); +} + +boolean ReadBytes(FILE *file, void *addr, UInt32 size) +{ + while (size > 0x8000) + { + if (fread(addr, 1, 0x8000, file) != 0x8000) + return false; + addr = (char *)addr + 0x8000; + size -= 0x8000; + } + if (fread(addr, 1, size, file) != size) + return false; + return true; +} +int ReadMagic(FILE *file) +{ + UInt8 buf[4]; + + if (ReadBytes(file, buf, 4) == FALSE) + return FTYPE_ERROR; + if (!strncmp(reinterpret_cast(&buf[0]), "IWAD", 4)) + return FTYPE_IWAD; + if (!strncmp(reinterpret_cast(&buf[0]), "PWAD", 4)) + return FTYPE_PWAD; + if (!strncmp(reinterpret_cast(&buf[0]), "PACK", 4)) + return FTYPE_PACK; + if (!strncmp(reinterpret_cast(&buf[0]), "WAD2", 4)) + return FTYPE_WAD2; + if (buf[0] == 0x17 && buf[1] == 0 && buf[2] == 0 && buf[3] == 0) + return FTYPE_BSP; + if (!strncmp(reinterpret_cast(&buf[0]), "IDPO", 4)) + return FTYPE_MODEL; + if (!strncmp(reinterpret_cast(&buf[0]), "IDSP", 4)) + return FTYPE_SPRITE; + if (!strncmp(reinterpret_cast(&buf[0]), "RIFF", 4)) + return FTYPE_WAV; + if (!strncmp(reinterpret_cast(&buf[0]), ".snd", 4)) + return FTYPE_AU; + if (buf[0] == 'P') + { + if (buf[1] == '1') + return FTYPE_PBM_ASC; + if (buf[1] == '2') + return FTYPE_PGM_ASC; + if (buf[1] == '3') + return FTYPE_PPM_ASC; + if (buf[1] == '4') + return FTYPE_PBM_RAW; + if (buf[1] == '5') + return FTYPE_PGM_RAW; + if (buf[1] == '6') + return FTYPE_PPM_RAW; + } + if (buf[0] == 'B' && buf[1] == 'M') + return FTYPE_BMP; + if (!strncmp(reinterpret_cast(&buf[0]), "GIF8", 4)) + return FTYPE_GIF; + if (buf[0] == 0x0a && buf[1] == 0x05 && buf[2] == 0x01 && buf[3] == 0x08) + return FTYPE_PCX; + return FTYPE_UNKNOWN; +} +FILE *OpenFileReadMagic(const char *filename, int *ftype_r) +{ + FILE *f; + + *ftype_r = FTYPE_ERROR; + if ((f = fopen(filename, "rb")) == NULL) + return NULL; + *ftype_r = ReadMagic(f); + if (*ftype_r == FTYPE_ERROR) + { + fclose(f); + return NULL; + } + return f; +} +boolean WriteBytes(FILE *file, void *addr, UInt32 size) +{ + while (size > 0x8000) + { + if (fwrite(addr, 1, 0x8000, file) != 0x8000) + return FALSE; + addr = (char *)addr + 0x8000; + size -= 0x8000; + } + if (fwrite(addr, 1, size, file) != size) + return FALSE; + return TRUE; +} +char *ConvertFilePath(char *filename) +{ + char *cp; + + if (filename == NULL) + ProgError("BUG: cannot convert a NULL pathname"); + for (cp = filename; *cp; cp++) + if (*cp == '/' || *cp == '\\') + { +#ifdef QEU_DOS + *cp = '\\'; +#else + *cp = '/'; +#endif + } + return filename; +} + +/* + * Read the PACK directory into memory. The optional offset to the + * start of the PACK file is given in "offset". The number of files in + * the directory is returned in *dirsize_r. + */ +PACKDirPtr ReadPACKDirectory(FILE *packfile, UInt32 offset, UInt16 *dirsize_r) +{ + PACKDirPtr dir; + UInt32 pos, size; + UInt16 max, i; + + *dirsize_r = 0; + if (packfile == NULL) + return NULL; + if ((fseek(packfile, offset, SEEK_SET) < 0) + || (ReadMagic(packfile) != FTYPE_PACK) + || (ReadInt32(packfile, &pos) == FALSE) + || (ReadInt32(packfile, &size) == FALSE) + || (size == 0L) + || (size / sizeof(struct PACKDirectory) > 65535L) + || (fseek(packfile, offset + pos, SEEK_SET) < 0)) + return NULL; + dir = (PACKDirPtr)__qmalloc(size); + max = (UInt16)(size / sizeof(struct PACKDirectory)); + for (i = 0; i < max; i++) + { + if (ReadBytes(packfile, &dir[i], sizeof(struct PACKDirectory)) == FALSE) + { + free(dir); + return NULL; + } + ConvertFilePath(dir[i].name); + dir[i].offset = SwapInt32(dir[i].offset); + dir[i].size = SwapInt32(dir[i].size); + } + *dirsize_r = max; + return dir; +} + +/* + * Print the contents of the PACK directory in "outf". + */ +void DumpPACKDirectory(FILE *outf, PACKDirPtr dir, UInt16 dirsize) +{ + UInt16 i; + UInt32 sum; + char buf[57]; + + if (outf == NULL || dir == NULL || dirsize == 0) + return; + fprintf(outf, "num offset size file name\n"); + fprintf(outf, " (hex) (dec)\n"); + sum = 0L; + for (i = 0; i < dirsize; i++) + { + if(!strnicmp(dir[i].name, "textures", 8)) + { + strncpy(buf, dir[i].name, 56); + buf[56] = '\0'; + fprintf(outf, "%3u 0x%08lx %6ld %s\n", + i, dir[i].offset, dir[i].size, buf); + sum += dir[i].size; + } + } + fprintf(outf, "\nTotal size for %3u entries: %7lu bytes.\n", dirsize, sum); + fprintf(outf, "Size of the PACK directory: %7lu bytes.\n", + (UInt32)dirsize * (UInt32)sizeof(struct PACKDirectory)); + fprintf(outf, "Total (header + data + dir): %7lu bytes.\n", + 12L + sum + (UInt32)dirsize * (UInt32)sizeof(struct PACKDirectory)); +} + +void ClearFileList(FILELIST **list) +{ + FILELIST *temp; + + while(*list) + { + temp = *list; + *list = (*list)->next; + free(temp); + } +} + +void ClearDirList(DIRLIST **list) +{ + DIRLIST *temp; + + while(*list) + { + temp = *list; + *list = (*list)->next; + free(temp); + } +} + +DIRECTORY *FindPakDir(DIRECTORY *dir, char *name) +{ + DIRECTORY *currentPtr; + + for(currentPtr = dir; currentPtr; currentPtr = currentPtr->next) + { + if(!stricmp(name, currentPtr->name)) + { + return currentPtr; + } + } + return NULL; +} + + +// LoadPK3FileList +// --------------- +// +// This gets passed a file mask which we want to remove as +// we are only interested in the directory name and any given +// extension. Only handles explicit filenames or *.something +// +boolean LoadPK3FileList(FILELIST **filelist, const char *pattern) +{ + char cSearch[WORK_LEN]; + __ConvertDOSToUnixName( cSearch, pattern ); + char cPath[WORK_LEN]; + char cExt[WORK_LEN]; + char cFile[WORK_LEN]; + char cWork[WORK_LEN]; + __ExtractFilePath(pattern, cPath); + __ExtractFileName(pattern, cFile); + __ExtractFileExtension(pattern, cExt); + const char *pCompare = (strnicmp(cFile, "*.", 2) == 0) ? cExt : cFile; + strcpy(cWork, cPath); + sprintf(cPath, "textures/%s", cWork); + + PK3List *p = g_PK3Files.Next(); + while (p != NULL) + { + // qualify the path + PK3FileInfo *pKey = p->Ptr(); + if (strstr(pKey->m_pName, cPath) && strstr(pKey->m_pName, pCompare)) + { + __ExtractFileName(pKey->m_pName, cWork); + AddToFileListAlphabetized(filelist, cWork, 0, 0, false); + } + p = p->Next(); + } + return (*filelist) != NULL; +} + +boolean GetPackFileList(FILELIST **filelist, char *pattern) +{ + char *str1, *str2; + int i; + DIRECTORY *dummy = paktextures; + FILELIST *temp; + + if (!pakopen) + return false; + + if (g_bPK3) + { + return LoadPK3FileList(filelist, pattern); + } + + str1 = pattern; + + for(i = 0; pattern[i] != '\0'; i++) + { + if(pattern[i] == '\\') + pattern[i] = '/'; + } + + while(strchr(str1, '/')) + { + str2 = strchr(str1, '/'); + *str2++ = '\0'; + dummy = FindPakDir(dummy, str1); + if(!dummy) + return false; + str1 = str2; + } + for(temp = dummy->files; temp; temp=temp->next) + { + AddToFileListAlphabetized(filelist, temp->filename, temp->offset, 0, false); + } + return true; +} + +boolean GetPackTextureDirs(DIRLIST **dirlist) +{ + UInt16 i; + char buf[57]; + + if (!pakopen) + return 1; + + if (g_bPK3) + { + StrList *pl = g_PK3TexturePaths.Next(); + while (pl != NULL) + { + AddToDirListAlphabetized(dirlist, pl->Ref(), 0); + pl = pl->Next(); + } + return true; + } + + for (i = 0; i < dirsize; i++) + { + if(!strnicmp(pakdirptr[i].name, "textures", 8)) + { + strncpy(buf, &(pakdirptr[i].name[9]), 46); + if(strchr(buf, '\\')) + *strchr(buf, '\\') = '\0'; + else if(strchr(buf, '/')) + *strchr(buf, '/') = '\0'; + else + buf[56] = '\0'; + + if(strchr(buf, '.')) + continue; + + AddToDirListAlphabetized(dirlist, buf, 0); + } + } + return true; +} + +boolean AddToDirListAlphabetized(DIRLIST **list, char *dirname, int from) +{ + DIRLIST *currentPtr, *previousPtr, *newPtr; + + strlwr(dirname); + for(currentPtr = *list; currentPtr; currentPtr = currentPtr->next) + { + if(!stricmp(dirname, currentPtr->dirname)) + { + return false; + } + } + previousPtr = NULL; + currentPtr = *list; + + if((newPtr = (DIRLIST *)__qmalloc(sizeof(DIRLIST))) == NULL) + return false; + + strcpy(newPtr->dirname, dirname); + newPtr->from = from; + + while(currentPtr != NULL && stricmp(dirname, currentPtr->dirname) > 0) + { + previousPtr = currentPtr; + currentPtr = currentPtr->next; + } //End while + if(previousPtr == NULL) + { + newPtr->next = *list; + *list = newPtr; + } //End if + else + { + previousPtr->next = newPtr; + newPtr->next = currentPtr; + } //End else + return true; +} + +boolean AddToFileListAlphabetized(FILELIST **list, char *filename, UInt32 offset, UInt32 size, boolean dirs) +{ + FILELIST *currentPtr, *previousPtr, *newPtr; + + for(currentPtr = *list; currentPtr; currentPtr = currentPtr->next) + { + if(!stricmp(filename, currentPtr->filename)) + { + return false; + } + } + previousPtr = NULL; + currentPtr = *list; + + if((newPtr = (FILELIST *)__qmalloc(sizeof(FILELIST))) == NULL) + return false; + + strcpy(newPtr->filename, filename); + newPtr->offset = offset; + newPtr->size = size; + + while(currentPtr != NULL && stricmp(filename, currentPtr->filename) > 0) + { + previousPtr = currentPtr; + currentPtr = currentPtr->next; + } //End while + if(previousPtr == NULL) + { + newPtr->next = *list; + *list = newPtr; + } //End if + else + { + previousPtr->next = newPtr; + newPtr->next = currentPtr; + } //End else + return true; +} + +boolean PakLoadFile(const char *filename, void **bufferptr) +{ + FILELIST *p = NULL; + DIRECTORY *dummy; + void *buffer; + char *str1, *str2; + + if(!pakopen) + return false; + + Str str(filename); + __ConvertDOSToUnixName(str, str); + + dummy = paktextures; + str1 = str; + + while(strchr(str1, '/')) + { + str2 = strchr(str1, '/'); + *str2++ = '\0'; + dummy = FindPakDir(dummy, str1); + if(!dummy) + return false; + str1 = str2; + } + + // FIXME: add error handling routines + for(p = dummy->files; p; p = p->next) + { + if(!stricmp(str1, p->filename)) + { + if (fseek(pakfile[m_nPAKIndex], p->offset, SEEK_SET) < 0) + { + //Sys_Printf("Unexpected EOF in pakfile\n"); + return false; + } + if((buffer = __qmalloc(p->size+5)) == NULL) + //Error("Could not allocate memory"); + + if(fread(buffer, 1, p->size, pakfile[m_nPAKIndex]) != p->size) + { + //Sys_Printf("Error reading %s from pak\n", str1); + free(buffer); + return false; + } + *bufferptr = buffer; + return true; + } + } + return false; +} + +int PakLoadAnyFile(const char *filename, void **bufferptr) +{ + char cWork[WORK_LEN]; + if (g_bPK3) + { + PK3FileInfo *pInfo; + Str strKey; + // need to lookup the file without the base/texture path on it + Str strBase(g_strBasePath); + AddSlash(strBase); + __ConvertDOSToUnixName(cWork, strBase); + Str strFile(filename); + __ConvertDOSToUnixName(strFile, strFile); + strFile.MakeLower(); + strlwr(cWork); + FindReplace(strFile, cWork, ""); + + PK3FileInfo infoFind; + infoFind.m_pName = __StrDup(strFile.GetBuffer()); + PK3List *pList = g_PK3Files.Find(&infoFind); + if (pList) + { + pInfo = pList->Ptr(); + memcpy(pInfo->m_zFile, &pInfo->m_zInfo, sizeof(unz_s)); + if (unzOpenCurrentFile(pInfo->m_zFile) == UNZ_OK) + { + void *buffer = __qblockmalloc(pInfo->m_lSize+1); + int n = unzReadCurrentFile(pInfo->m_zFile , buffer, pInfo->m_lSize); + *bufferptr = buffer; + unzCloseCurrentFile(pInfo->m_zFile); + return n; + } + } +#ifdef LOG_PAKFAIL + sprintf(cWork, "PAK failed on %s\n", filename); + g_LogFile.Log(cWork); +#endif + return -1; + } + + for (int i = 0; i < dirsize; i++) + { + if(!stricmp(filename, pakdirptr[i].name)) + { + if (fseek(pakfile[m_nPAKIndex], pakdirptr[i].offset, SEEK_SET) >= 0) + { + void *buffer = __qmalloc (pakdirptr[i].size+1); + ((char *)buffer)[pakdirptr[i].size] = 0; + if (fread(buffer, 1, pakdirptr[i].size, pakfile[m_nPAKIndex]) == pakdirptr[i].size) + { + *bufferptr = buffer; + return pakdirptr[i].size; + } + } + } + } +#ifdef LOG_PAKFAIL + sprintf(cWork, "PAK failed on %s\n", filename); + g_LogFile.Log(cWork); +#endif + return -1; +} + + + +DIRECTORY *AddPakDir(DIRECTORY **dir, char *name) +{ + DIRECTORY *currentPtr, *previousPtr, *newPtr; + + for(currentPtr = *dir; currentPtr; currentPtr = currentPtr->next) + { + if(!stricmp(name, currentPtr->name)) + { + return currentPtr; + } + } + previousPtr = NULL; + currentPtr = *dir; + + if((newPtr = (DIRECTORY *)__qmalloc(sizeof(DIRECTORY))) == NULL) + return NULL; + + strcpy(newPtr->name, name); + newPtr->files = NULL; + + while(currentPtr != NULL && stricmp(name, currentPtr->name) > 0) + { + previousPtr = currentPtr; + currentPtr = currentPtr->next; + } + if(previousPtr == NULL) + { + newPtr->next = *dir; + *dir = newPtr; + } + else + { + previousPtr->next = newPtr; + newPtr->next = currentPtr; + } + return newPtr; +} + + +// OpenPK3 +// ------- +// Opens a PK3 ( or zip ) file and creates a list of filenames +// and zip info structures +// +boolean OpenPK3(const char *filename) +{ + char cFilename[WORK_LEN]; + char cName[WORK_LEN]; + char cWork[WORK_LEN]; + unz_file_info zInfo; + unzFile *zFile = new unzFile(unzOpen(filename)); + g_zFiles.Add(zFile); + if (zFile != NULL) + { + int nStatus = unzGoToFirstFile(*zFile); + while (nStatus == UNZ_OK) + { + cFilename[0] = '\0'; + unzGetCurrentFileInfo(*zFile, &zInfo, cFilename, WORK_LEN, NULL, 0, NULL, 0); + strlwr(cFilename); + __ConvertDOSToUnixName( cWork, cFilename); + if (strstr(cWork, ".") != NULL) + { + PK3FileInfo *pInfo = new PK3FileInfo(); + pInfo->m_pName = __StrDup(cWork); + memcpy(&pInfo->m_zInfo, (unz_s*)*zFile, sizeof(unz_s)); + pInfo->m_lSize = zInfo.uncompressed_size; + pInfo->m_zFile = *zFile; + g_PK3Files.Add(pInfo); + } + char *p = strstr(cFilename, TEXTURE_PATH); + if (p != NULL) + { + // FIXME: path differences per os ? + // catch solo directory entry + if (strlen(p) > strlen(TEXTURE_PATH) + 1) + { + // skip textures + path seperator + p += strlen(TEXTURE_PATH) + 1; + int nEnd = strcspn(p, PATH_SEPERATORS); + strncpy(cName, p, nEnd); + cName[nEnd] = '\0'; + + boolean bFound = false; + StrList *pl = g_PK3TexturePaths.Next(); + while (pl != NULL) + { + if (strcmpi(pl->Ref(), cName) == 0) + { + // already have this, continue + bFound = true; + break; + } + pl = pl->Next(); + } + if (!bFound) + { + g_PK3TexturePaths.Add(new Str(cName)); + } + } + } + nStatus = unzGoToNextFile(*zFile); + } + } + return (zFile != NULL); +} + +void closePK3(unzFile zf) +{ + unzClose(zf); +} + +void OpenPakFile(const char *filename) +{ + int i; + char *str1, *str2; + DIRECTORY *dummy; + + if(!pakopen) + paktextures = NULL; + + HavePakColormap = false; + + Str strTest(filename); + strTest.MakeLower(); + if (strTest.Find("pk3") >= 0 || strTest.Find("zip") >= 0) + { + pakopen = g_bPK3 = OpenPK3(filename); + return; + } + + + if((pakfile[m_nPAKIndex] = OpenFileReadMagic(filename, &f_type)) == NULL) + { + //FIXME: error routine + //Sys_Printf("ERROR: Could not open %s", filename); + return; + } + if(f_type != FTYPE_PACK) + { + //Sys_Printf("ERROR: %s is not a valid pack file", filename); + if(f_type != FTYPE_ERROR) + fclose(pakfile[m_nPAKIndex]); + return; + } + pakdirptr = ReadPACKDirectory(pakfile[m_nPAKIndex], 0, &dirsize); + if (pakdirptr == NULL) + { + //Sys_Printf("ERROR: Could not read pack directory", filename); + fclose(pakfile[m_nPAKIndex]); + return; + } + if (dirsize == 0) + { + fclose(pakfile[m_nPAKIndex]); + return; + } + for (i = 0; i < dirsize; i++) + { + if(!strnicmp("textures/", pakdirptr[i].name, 9)) + { + dummy = paktextures; + str1 = pakdirptr[i].name+9; + while(strchr(str1, '/')) + { + str2 = strchr(str1, '/'); + *str2++ = '\0'; + dummy = AddPakDir(dummy==paktextures?&paktextures:&dummy, str1); + str1 = str2; + } + + AddToFileListAlphabetized(&(dummy->files), str1, pakdirptr[i].offset, pakdirptr[i].size, true); + } + else if(!strnicmp("pics/colormap.pcx", pakdirptr[i].name, 17)) + { + HavePakColormap = true; + PakColormapOffset = pakdirptr[i].offset; + PakColormapSize = pakdirptr[i].size; + } + } + pakopen = true; + +} + +void ClearPaKDir(DIRECTORY **dir) +{ + DIRECTORY *d1 = *dir, *d2; + + while(d1) + { + ClearFileList(&(d1->files)); + d2 = d1; + d1 = d1->next; + free(d2); + } +} + +void CleanUpPakDirs() +{ + ClearPaKDir(&paktextures); + paktextures = NULL; + dirhead = NULL; + g_PK3TexturePaths.RemoveAll(); + g_PK3Files.RemoveAll(); +} + +void ClosePakFile(void) +{ + if(pakopen) + { + if (g_bPK3) + { + ZFileList *p = g_zFiles.Next(); + while (p != NULL) + { + unzFile uz = p->Ref(); + closePK3(uz); + p = p->Next(); + } + } + else + { + fclose(pakfile[m_nPAKIndex]); + } + } + pakopen = false; + CleanUpPakDirs(); +} + + +void WINAPI InitPakFile(const char * pBasePath, const char *pName) +{ + m_nPAKIndex = 0; + pakopen = false; + paktextures = NULL; + strcpy(g_strBasePath, pBasePath); + if (pName == NULL) + { + char cWork[WORK_LEN]; + Str strPath(pBasePath); + AddSlash(strPath); + strPath += "*.pk3"; + bool bGo = true; + struct _finddata_t fileinfo; + int handle = _findfirst (strPath, &fileinfo); + if (handle != -1) + { + do + { + sprintf(cWork, "%s\\%s", pBasePath, fileinfo.name); + OpenPakFile(cWork); + } while (_findnext( handle, &fileinfo ) != -1); + _findclose (handle); + } + } + else + { + OpenPakFile(pName); + } +} + diff --git a/libs/pak/unzip.cpp b/libs/pak/unzip.cpp index 20087da..8dc82c4 100755 --- a/libs/pak/unzip.cpp +++ b/libs/pak/unzip.cpp @@ -1,4546 +1,4546 @@ -/***************************************************************************** - * name: unzip.c - * - * desc: IO on .zip files using portions of zlib - * - * $Archive: /source/code/qcommon/unzip.c $ - * $Author: ttimo $ - * $Revision: 1.1.1.3 $ - * $Modtime: 10/19/99 3:59p $ - * $Date: 2000/01/11 16:37:27 $ - * - *****************************************************************************/ - -#include -#include -#include -#include "unzip.h" -//#include "cmdlib.h" - -/* unzip.h -- IO for uncompress .zip files using zlib - Version 0.15 beta, Mar 19th, 1998, - - Copyright (C) 1998 Gilles Vollant - - This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g - WinZip, InfoZip tools and compatible. - Encryption and multi volume ZipFile (span) are not supported. - Old compressions used by old PKZip 1.x are not supported - - THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE - CAN CHANGE IN FUTURE VERSION !! - I WAIT FEEDBACK at mail info@winimage.com - Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution - - Condition of use and distribution are the same than zlib : - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - -*/ -/* for more info about .ZIP format, see - ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip - PkWare has also a specification at : - ftp://ftp.pkware.com/probdesc.zip */ - -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.1.3, July 9th, 1998 - - Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ - -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-1998 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id: unzip.cpp,v 1.1.1.3 2000/01/11 16:37:27 ttimo Exp $ */ - -#ifndef _ZCONF_H -#define _ZCONF_H - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -#define OF(args) args -#endif - -typedef unsigned char Byte; /* 8 bits */ -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ -typedef Byte *voidp; - -#ifndef SEEK_SET -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#endif /* _ZCONF_H */ - -#define ZLIB_VERSION "1.1.3" - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms will be added later and will have the same - stream interface. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never - crash even in case of corrupted input. -*/ - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -/* Allowed flush values; see deflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative - * values are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_ASCII 1 -#define Z_UNKNOWN 2 -/* Possible values of the data_type field */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - /* basic functions */ - -const char * zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. - */ - -/* -int deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at - all (the input data is simply copied a block at a time). - Z_DEFAULT_COMPRESSION requests a default compromise between speed and - compression (currently equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level, - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -*/ - - -int deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce some - output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK - and with zero avail_out, it must be called again after making room in the - output buffer because there might be more output pending. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In particular - avail_in is zero after the call if enough output space has been provided - before the call.) Flushing may degrade compression for some compression - algorithms and so it should be used only when necessary. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - the compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - 0.1% larger than avail_in plus 12 bytes. If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so (that is, total_in bytes). - - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). -*/ - - -int deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, - msg may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -int inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the exact - value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller. msg is set to null if there is no error - message. inflateInit does not perform any decompression apart from reading - the zlib header if present: this will be done by inflate(). (So next_in and - avail_in may be modified, but next_out and avail_out are unchanged.) -*/ - - -int inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may some - introduce some output latency (reading input without producing any output) - except when forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there - is no more input data or no more space in the output buffer (see below - about the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. - - If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much - output as possible to the output buffer. The flushing behavior of inflate is - not specified for values of the flush parameter other than Z_SYNC_FLUSH - and Z_FINISH, but the current implementation actually flushes as much output - as possible anyway. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine - may be used for the single inflate() call. - - If a preset dictionary is needed at this point (see inflateSetDictionary - below), inflate sets strm-adler to the adler32 checksum of the - dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise - it sets strm->adler to the adler32 checksum of all output produced - so (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or - an error code as described below. At the end of the stream, inflate() - checks that its computed adler32 checksum is equal to that saved by the - compressor and returns Z_STREAM_END only if the checksum is correct. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect - adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent - (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if no progress is possible or if there was not - enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR - case, the application may then call inflateSync to look for a good - compression block. -*/ - - -int inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -int deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by - the caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match). Filtered data consists mostly of small values with a - somewhat random distribution. In this case, the compression algorithm is - tuned to compress them better. The effect of Z_FILTERED is to force more - Huffman coding and less string matching; it is somewhat intermediate - between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects - the compression ratio but not the correctness of the compressed output even - if it is not set appropriately. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid - method). msg is set to null if there is no error message. deflateInit2 does - not perform any compression: this will be done by deflate(). -*/ - -int deflateSetDictionary OF((z_streamp strm, - const Byte *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any - call of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size in - deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. - - Upon return of this function, strm->adler is set to the Adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The Adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). -*/ - -int deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -int deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -int deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different - strategy. If the compression level is changed, the input available so far - is compressed with the old level (and may be flushed); the new level will - take effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero. -*/ - -/* -int inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. If a compressed stream with a larger window size is given as - input, inflate() will return with the error code Z_DATA_ERROR instead of - trying to allocate a larger window. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative - memLevel). msg is set to null if there is no error message. inflateInit2 - does not perform any decompression apart from reading the zlib header if - present: this will be done by inflate(). (So next_in and avail_in may be - modified, but next_out and avail_out are unchanged.) -*/ - -int inflateSetDictionary OF((z_streamp strm, - const Byte *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate - if this call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the Adler32 value returned by this call of - inflate. The compressor and decompressor must use exactly the same - dictionary (see deflateSetDictionary). - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect Adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -int inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - -int inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - - - /* utility functions */ - -/* - The following utility functions are implemented on top of the - basic stream-oriented functions. To simplify the interface, some - default options are assumed (compression level and memory usage, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. -*/ - -int compress OF((Byte *dest, uLong *destLen, - const Byte *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least 0.1% larger than - sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -int compress2 OF((Byte *dest, uLong *destLen, - const Byte *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least 0.1% larger than sourceLen plus - 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -int uncompress OF((Byte *dest, uLong *destLen, - const Byte *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -*/ - - -typedef voidp gzFile; - -gzFile gzopen OF((const char *path, const char *mode)); -/* - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level - ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for - Huffman only compression as in "wb1h". (See the description - of deflateInit2 for more information about the strategy parameter.) - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. - - gzopen returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). */ - -gzFile gzdopen OF((int fd, const char *mode)); -/* - gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or - fileno (in the file has been previously opened with fopen). - The mode parameter is as in gzopen. - The next call of gzclose on the returned gzFile will also close the - file descriptor fd, just like fclose(fdopen(fd), mode) closes the file - descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). - gzdopen returns NULL if there was insufficient memory to allocate - the (de)compression state. -*/ - -int gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -int gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number - of bytes into the buffer. - gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). */ - -int gzwrite OF((gzFile file, - const voidp buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes actually written - (0 in case of error). -*/ - -int gzprintf OF((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written (0 in case of error). -*/ - -int gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. -*/ - -char * gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or - a newline character is read and transferred to buf, or an end-of-file - condition is encountered. The string is then terminated with a null - character. - gzgets returns buf, or Z_NULL in case of error. -*/ - -int gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. -*/ - -int gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. -*/ - -int gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib - error number (see function gzerror below). gzflush returns Z_OK if - the flush parameter is Z_FINISH and all output could be flushed. - gzflush should be called only when strictly necessary because it can - degrade compression. -*/ - -long gzseek OF((gzFile file, - long offset, int whence)); -/* - Sets the starting position for the next gzread or gzwrite on the - given compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -int gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -long gztell OF((gzFile file)); -/* - Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the - uncompressed data stream. - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -int gzeof OF((gzFile file)); -/* - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. -*/ - -int gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). -*/ - -const char * gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the - compression library. -*/ - -uLong adler32 OF((uLong adler, const Byte *buf, uInt len)); - -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -uLong crc32 OF((uLong crc, const Byte *buf, uInt len)); -/* - Update a running crc with the bytes buf[0..len-1] and return the updated - crc. If buf is NULL, this function returns the required initial value - for the crc. Pre- and post-conditioning (one's complement) is performed - within this function so it shouldn't be done by the application. - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -// private stuff to not include cmdlib.h -/* -============================================================================ - - BYTE ORDER FUNCTIONS - -============================================================================ -*/ - -#ifdef _SGI_SOURCE -#define __BIG_ENDIAN__ -#endif - -#ifdef __BIG_ENDIAN__ - -short __LittleShort (short l) -{ - byte b1,b2; - - b1 = l&255; - b2 = (l>>8)&255; - - return (b1<<8) + b2; -} - -short __BigShort (short l) -{ - return l; -} - - -int __LittleLong (int l) -{ - byte b1,b2,b3,b4; - - b1 = l&255; - b2 = (l>>8)&255; - b3 = (l>>16)&255; - b4 = (l>>24)&255; - - return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; -} - -int __BigLong (int l) -{ - return l; -} - - -float __LittleFloat (float l) -{ - union {byte b[4]; float f;} in, out; - - in.f = l; - out.b[0] = in.b[3]; - out.b[1] = in.b[2]; - out.b[2] = in.b[1]; - out.b[3] = in.b[0]; - - return out.f; -} - -float __BigFloat (float l) -{ - return l; -} - - -#else - - -short __BigShort (short l) -{ - byte b1,b2; - - b1 = l&255; - b2 = (l>>8)&255; - - return (b1<<8) + b2; -} - -short __LittleShort (short l) -{ - return l; -} - - -int __BigLong (int l) -{ - byte b1,b2,b3,b4; - - b1 = l&255; - b2 = (l>>8)&255; - b3 = (l>>16)&255; - b4 = (l>>24)&255; - - return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; -} - -int __LittleLong (int l) -{ - return l; -} - -float __BigFloat (float l) -{ - union {byte b[4]; float f;} in, out; - - in.f = l; - out.b[0] = in.b[3]; - out.b[1] = in.b[2]; - out.b[2] = in.b[1]; - out.b[3] = in.b[0]; - - return out.f; -} - -float __LittleFloat (float l) -{ - return l; -} - - - -#endif - - - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -int deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -int inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -int deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -int inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) - - -const char * zError OF((int err)); -int inflateSyncPoint OF((z_streamp z)); -const uLong * get_crc_table OF((void)); - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ -/* (size given to avoid silly warnings with Visual C++) */ - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - - /* common constants */ - -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - -#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - - /* target dependencies */ - - /* Common defaults */ - -#ifndef OS_CODE -# define OS_CODE 0x03 /* assume Unix */ -#endif - -#ifndef F_OPEN -# define F_OPEN(name, mode) fopen((name), (mode)) -#endif - - /* functions */ - -#ifdef HAVE_STRERROR - extern char *strerror OF((int)); -# define zstrerror(errnum) strerror(errnum) -#else -# define zstrerror(errnum) "" -#endif - -#define zmemcpy memcpy -#define zmemcmp memcmp -#define zmemzero(dest, len) memset(dest, 0, len) - -/* Diagnostic functions */ -#ifdef _ZIP_DEBUG_ - int z_verbose = 0; -# define Assert(cond,msg) assert(cond); - //{if(!(cond)) Sys_Error(msg);} -# define Trace(x) {if (z_verbose>=0) Sys_Error x ;} -# define Tracev(x) {if (z_verbose>0) Sys_Error x ;} -# define Tracevv(x) {if (z_verbose>1) Sys_Error x ;} -# define Tracec(c,x) {if (z_verbose>0 && (c)) Sys_Error x ;} -# define Tracecv(c,x) {if (z_verbose>1 && (c)) Sys_Error x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - - -typedef uLong (*check_func) OF((uLong check, const Byte *buf, uInt len)); -voidp zcalloc OF((voidp opaque, unsigned items, unsigned size)); -void zcfree OF((voidp opaque, voidp ptr)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidp)(addr)) -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - - -#if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) && \ - !defined(CASESENSITIVITYDEFAULT_NO) -#define CASESENSITIVITYDEFAULT_NO -#endif - - -#ifndef UNZ_BUFSIZE -#define UNZ_BUFSIZE (65536) -#endif - -#ifndef UNZ_MAXFILENAMEINZIP -#define UNZ_MAXFILENAMEINZIP (256) -#endif - -#ifndef ALLOC -# define ALLOC(size) (malloc(size)) -#endif -#ifndef TRYFREE -# define TRYFREE(p) {if (p) free(p);} -#endif - -#define SIZECENTRALDIRITEM (0x2e) -#define SIZEZIPLOCALHEADER (0x1e) - - - -/* =========================================================================== - Read a byte from a gz_stream; update next_in and avail_in. Return EOF - for end of file. - IN assertion: the stream s has been sucessfully opened for reading. -*/ - -/* -static int unzlocal_getByte(FILE *fin,int *pi) -{ - unsigned char c; - int err = fread(&c, 1, 1, fin); - if (err==1) - { - *pi = (int)c; - return UNZ_OK; - } - else - { - if (ferror(fin)) - return UNZ_ERRNO; - else - return UNZ_EOF; - } -} -*/ - -/* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets -*/ -static int unzlocal_getShort (FILE* fin, uLong *pX) -{ - short v; - - fread( &v, sizeof(v), 1, fin ); - - *pX = __LittleShort( v); - return UNZ_OK; - -/* - uLong x ; - int i; - int err; - - err = unzlocal_getByte(fin,&i); - x = (uLong)i; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<8; - - if (err==UNZ_OK) - *pX = x; - else - *pX = 0; - return err; -*/ -} - -static int unzlocal_getLong (FILE *fin, uLong *pX) -{ - int v; - - fread( &v, sizeof(v), 1, fin ); - - *pX = __LittleLong( v); - return UNZ_OK; - -/* - uLong x ; - int i; - int err; - - err = unzlocal_getByte(fin,&i); - x = (uLong)i; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<8; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<16; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<24; - - if (err==UNZ_OK) - *pX = x; - else - *pX = 0; - return err; -*/ -} - - -/* My own strcmpi / strcasecmp */ -static int strcmpcasenosensitive_internal (const char* fileName1,const char* fileName2) -{ - for (;;) - { - char c1=*(fileName1++); - char c2=*(fileName2++); - if ((c1>='a') && (c1<='z')) - c1 -= 0x20; - if ((c2>='a') && (c2<='z')) - c2 -= 0x20; - if (c1=='\0') - return ((c2=='\0') ? 0 : -1); - if (c2=='\0') - return 1; - if (c1c2) - return 1; - } -} - - -#ifdef CASESENSITIVITYDEFAULT_NO -#define CASESENSITIVITYDEFAULTVALUE 2 -#else -#define CASESENSITIVITYDEFAULTVALUE 1 -#endif - -#ifndef STRCMPCASENOSENTIVEFUNCTION -#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal -#endif - -/* - Compare two filename (fileName1,fileName2). - If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) - If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi - or strcasecmp) - If iCaseSenisivity = 0, case sensitivity is defaut of your operating system - (like 1 on Unix, 2 on Windows) - -*/ -extern int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity) -{ - if (iCaseSensitivity==0) - iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; - - if (iCaseSensitivity==1) - return strcmp(fileName1,fileName2); - - return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); -} - -#define BUFREADCOMMENT (0x400) - -/* - Locate the Central directory of a zipfile (at the end, just before - the global comment) -*/ -static uLong unzlocal_SearchCentralDir(FILE *fin) -{ - unsigned char* buf; - uLong uSizeFile; - uLong uBackRead; - uLong uMaxBack=0xffff; /* maximum size of global comment */ - uLong uPosFound=0; - - if (fseek(fin,0,SEEK_END) != 0) - return 0; - - - uSizeFile = ftell( fin ); - - if (uMaxBack>uSizeFile) - uMaxBack = uSizeFile; - - buf = (unsigned char*)malloc(BUFREADCOMMENT+4); - if (buf==NULL) - return 0; - - uBackRead = 4; - while (uBackReaduMaxBack) - uBackRead = uMaxBack; - else - uBackRead+=BUFREADCOMMENT; - uReadPos = uSizeFile-uBackRead ; - - uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? - (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); - if (fseek(fin,uReadPos,SEEK_SET)!=0) - break; - - if (fread(buf,(uInt)uReadSize,1,fin)!=1) - break; - - for (i=(int)uReadSize-3; (i--)>0;) - if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && - ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) - { - uPosFound = uReadPos+i; - break; - } - - if (uPosFound!=0) - break; - } - free(buf); - return uPosFound; -} - -extern unzFile unzReOpen (const char* path, unzFile file) -{ - unz_s *s; - FILE * fin; - - fin=fopen(path,"rb"); - if (fin==NULL) - return NULL; - - s=(unz_s*)malloc(sizeof(unz_s)); - memcpy(s, (unz_s*)file, sizeof(unz_s)); - - s->file = fin; - return (unzFile)s; -} - -/* - Open a Zip file. path contain the full pathname (by example, - on a Windows NT computer "c:\\test\\zlib109.zip" or on an Unix computer - "zlib/zlib109.zip". - If the zipfile cannot be opened (file don't exist or in not valid), the - return value is NULL. - Else, the return value is a unzFile Handle, usable with other function - of this unzip package. -*/ -extern unzFile unzOpen (const char* path) -{ - unz_s us; - unz_s *s; - uLong central_pos,uL; - FILE * fin ; - - uLong number_disk; /* number of the current dist, used for - spaning ZIP, unsupported, always 0*/ - uLong number_disk_with_CD; /* number the the disk with central dir, used - for spaning ZIP, unsupported, always 0*/ - uLong number_entry_CD; /* total number of entries in - the central dir - (same than number_entry on nospan) */ - - int err=UNZ_OK; - - fin=fopen(path,"rb"); - if (fin==NULL) - return NULL; - - central_pos = unzlocal_SearchCentralDir(fin); - if (central_pos==0) - err=UNZ_ERRNO; - - if (fseek(fin,central_pos,SEEK_SET)!=0) - err=UNZ_ERRNO; - - /* the signature, already checked */ - if (unzlocal_getLong(fin,&uL)!=UNZ_OK) - err=UNZ_ERRNO; - - /* number of this disk */ - if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) - err=UNZ_ERRNO; - - /* number of the disk with the start of the central directory */ - if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) - err=UNZ_ERRNO; - - /* total number of entries in the central dir on this disk */ - if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) - err=UNZ_ERRNO; - - /* total number of entries in the central dir */ - if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) - err=UNZ_ERRNO; - - if ((number_entry_CD!=us.gi.number_entry) || - (number_disk_with_CD!=0) || - (number_disk!=0)) - err=UNZ_BADZIPFILE; - - /* size of the central directory */ - if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) - err=UNZ_ERRNO; - - /* offset of start of central directory with respect to the - starting disk number */ - if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) - err=UNZ_ERRNO; - - /* zipfile comment length */ - if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) - err=UNZ_ERRNO; - - if ((central_pospfile_in_zip_read!=NULL) - unzCloseCurrentFile(file); - - fclose(s->file); - free(s); - return UNZ_OK; -} - - -/* - Write info about the ZipFile in the *pglobal_info structure. - No preparation of the structure is needed - return UNZ_OK if there is no problem. */ -extern int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info) -{ - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - *pglobal_info=s->gi; - return UNZ_OK; -} - - -/* - Translate date/time from Dos format to tm_unz (readable more easilty) -*/ -static void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm) -{ - uLong uDate; - uDate = (uLong)(ulDosDate>>16); - ptm->tm_mday = (uInt)(uDate&0x1f) ; - ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; - ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; - - ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); - ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; - ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; -} - -/* - Get Info about the current file in the zipfile, with internal only info -*/ -static int unzlocal_GetCurrentFileInfoInternal (unzFile file, - unz_file_info *pfile_info, - unz_file_info_internal - *pfile_info_internal, - char *szFileName, - uLong fileNameBufferSize, - void *extraField, - uLong extraFieldBufferSize, - char *szComment, - uLong commentBufferSize) -{ - unz_s* s; - unz_file_info file_info; - unz_file_info_internal file_info_internal; - int err=UNZ_OK; - uLong uMagic; - long lSeek=0; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (fseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0) - err=UNZ_ERRNO; - - - /* we check the magic */ - if (err==UNZ_OK) - if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) - err=UNZ_ERRNO; - else if (uMagic!=0x02014b50) - err=UNZ_BADZIPFILE; - - if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK) - err=UNZ_ERRNO; - - unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); - - if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK) - err=UNZ_ERRNO; - - lSeek+=file_info.size_filename; - if ((err==UNZ_OK) && (szFileName!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_filename0) && (fileNameBufferSize>0)) - if (fread(szFileName,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - lSeek -= uSizeRead; - } - - - if ((err==UNZ_OK) && (extraField!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_file_extrafile,lSeek,SEEK_CUR)==0) - lSeek=0; - else - err=UNZ_ERRNO; - if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) - if (fread(extraField,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - lSeek += file_info.size_file_extra - uSizeRead; - } - else - lSeek+=file_info.size_file_extra; - - - if ((err==UNZ_OK) && (szComment!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_file_commentfile,lSeek,SEEK_CUR)==0) - lSeek=0; - else - err=UNZ_ERRNO; - if ((file_info.size_file_comment>0) && (commentBufferSize>0)) - if (fread(szComment,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - lSeek+=file_info.size_file_comment - uSizeRead; - } - else - lSeek+=file_info.size_file_comment; - - if ((err==UNZ_OK) && (pfile_info!=NULL)) - *pfile_info=file_info; - - if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) - *pfile_info_internal=file_info_internal; - - return err; -} - - - -/* - Write info about the ZipFile in the *pglobal_info structure. - No preparation of the structure is needed - return UNZ_OK if there is no problem. -*/ -extern int unzGetCurrentFileInfo ( unzFile file, unz_file_info *pfile_info, - char *szFileName, uLong fileNameBufferSize, - void *extraField, uLong extraFieldBufferSize, - char *szComment, uLong commentBufferSize) -{ - return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, - szFileName,fileNameBufferSize, - extraField,extraFieldBufferSize, - szComment,commentBufferSize); -} - -/* - Set the current file of the zipfile to the first file. - return UNZ_OK if there is no problem -*/ -extern int unzGoToFirstFile (unzFile file) -{ - int err=UNZ_OK; - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - s->pos_in_central_dir=s->offset_central_dir; - s->num_file=0; - err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return err; -} - - -/* - Set the current file of the zipfile to the next file. - return UNZ_OK if there is no problem - return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. -*/ -extern int unzGoToNextFile (unzFile file) -{ - unz_s* s; - int err; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_END_OF_LIST_OF_FILE; - if (s->num_file+1==s->gi.number_entry) - return UNZ_END_OF_LIST_OF_FILE; - - s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + - s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; - s->num_file++; - err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return err; -} - - -/* - Try locate the file szFileName in the zipfile. - For the iCaseSensitivity signification, see unzipStringFileNameCompare - - return value : - UNZ_OK if the file is found. It becomes the current file. - UNZ_END_OF_LIST_OF_FILE if the file is not found -*/ -extern int unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity) -{ - unz_s* s; - int err; - - - uLong num_fileSaved; - uLong pos_in_central_dirSaved; - - - if (file==NULL) - return UNZ_PARAMERROR; - - if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) - return UNZ_PARAMERROR; - - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_END_OF_LIST_OF_FILE; - - num_fileSaved = s->num_file; - pos_in_central_dirSaved = s->pos_in_central_dir; - - err = unzGoToFirstFile(file); - - while (err == UNZ_OK) - { - char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; - unzGetCurrentFileInfo(file,NULL, - szCurrentFileName,sizeof(szCurrentFileName)-1, - NULL,0,NULL,0); - if (unzStringFileNameCompare(szCurrentFileName, - szFileName,iCaseSensitivity)==0) - return UNZ_OK; - err = unzGoToNextFile(file); - } - - s->num_file = num_fileSaved ; - s->pos_in_central_dir = pos_in_central_dirSaved ; - return err; -} - - -/* - Read the static header of the current zipfile - Check the coherency of the static header and info in the end of central - directory about this file - store in *piSizeVar the size of extra info in static header - (filename and size of extra field data) -*/ -static int unzlocal_CheckCurrentFileCoherencyHeader (unz_s* s, uInt* piSizeVar, - uLong *poffset_local_extrafield, - uInt *psize_local_extrafield) -{ - uLong uMagic,uData,uFlags; - uLong size_filename; - uLong size_extra_field; - int err=UNZ_OK; - - *piSizeVar = 0; - *poffset_local_extrafield = 0; - *psize_local_extrafield = 0; - - if (fseek(s->file,s->cur_file_info_internal.offset_curfile + - s->byte_before_the_zipfile,SEEK_SET)!=0) - return UNZ_ERRNO; - - - if (err==UNZ_OK) - if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) - err=UNZ_ERRNO; - else if (uMagic!=0x04034b50) - err=UNZ_BADZIPFILE; - - if (unzlocal_getShort(s->file,&uData) != UNZ_OK) - err=UNZ_ERRNO; -/* - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) - err=UNZ_BADZIPFILE; -*/ - if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&uData) != UNZ_OK) - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) - err=UNZ_BADZIPFILE; - - if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && - (s->cur_file_info.compression_method!=Z_DEFLATED)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* date/time */ - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* crc */ - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size compr */ - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size uncompr */ - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - - if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK) - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) - err=UNZ_BADZIPFILE; - - *piSizeVar += (uInt)size_filename; - - if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK) - err=UNZ_ERRNO; - *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + - SIZEZIPLOCALHEADER + size_filename; - *psize_local_extrafield = (uInt)size_extra_field; - - *piSizeVar += (uInt)size_extra_field; - - return err; -} - -/* - Open for reading data the current file in the zipfile. - If there is no error and the file is opened, the return value is UNZ_OK. -*/ -extern int unzOpenCurrentFile (unzFile file) -{ - int err=UNZ_OK; - int Store; - uInt iSizeVar; - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - uLong offset_local_extrafield; /* offset of the static extra field */ - uInt size_local_extrafield; /* size of the static extra field */ - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_PARAMERROR; - - if (s->pfile_in_zip_read != NULL) - unzCloseCurrentFile(file); - - if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, - &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) - return UNZ_BADZIPFILE; - - pfile_in_zip_read_info = (file_in_zip_read_info_s*) - malloc(sizeof(file_in_zip_read_info_s)); - if (pfile_in_zip_read_info==NULL) - return UNZ_INTERNALERROR; - - pfile_in_zip_read_info->read_buffer=(char*)malloc(UNZ_BUFSIZE); - pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; - pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; - pfile_in_zip_read_info->pos_local_extrafield=0; - - if (pfile_in_zip_read_info->read_buffer==NULL) - { - free(pfile_in_zip_read_info); - return UNZ_INTERNALERROR; - } - - pfile_in_zip_read_info->stream_initialised=0; - - if ((s->cur_file_info.compression_method!=0) && - (s->cur_file_info.compression_method!=Z_DEFLATED)) - err=UNZ_BADZIPFILE; - Store = s->cur_file_info.compression_method==0; - - pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; - pfile_in_zip_read_info->crc32=0; - pfile_in_zip_read_info->compression_method = - s->cur_file_info.compression_method; - pfile_in_zip_read_info->file=s->file; - pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; - - pfile_in_zip_read_info->stream.total_out = 0; - - if (!Store) - { - pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; - pfile_in_zip_read_info->stream.zfree = (free_func)0; - pfile_in_zip_read_info->stream.opaque = (voidp)0; - - err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); - if (err == Z_OK) - pfile_in_zip_read_info->stream_initialised=1; - /* windowBits is passed < 0 to tell that there is no zlib header. - * Note that in this case inflate *requires* an extra "dummy" byte - * after the compressed stream in order to complete decompression and - * return Z_STREAM_END. - * In unzip, i don't wait absolutely Z_STREAM_END because I known the - * size of both compressed and uncompressed data - */ - } - pfile_in_zip_read_info->rest_read_compressed = - s->cur_file_info.compressed_size ; - pfile_in_zip_read_info->rest_read_uncompressed = - s->cur_file_info.uncompressed_size ; - - - pfile_in_zip_read_info->pos_in_zipfile = - s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + - iSizeVar; - - pfile_in_zip_read_info->stream.avail_in = (uInt)0; - - - s->pfile_in_zip_read = pfile_in_zip_read_info; - return UNZ_OK; -} - - -/* - Read bytes from the current file. - buf contain buffer where data must be copied - len the size of buf. - - return the number of byte copied if somes bytes are copied - return 0 if the end of file was reached - return <0 with error code if there is an error - (UNZ_ERRNO for IO error, or zLib error for uncompress error) -*/ -extern int unzReadCurrentFile (unzFile file, void *buf, unsigned len) -{ - int err=UNZ_OK; - uInt iRead = 0; - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - - if ((pfile_in_zip_read_info->read_buffer == NULL)) - return UNZ_END_OF_LIST_OF_FILE; - if (len==0) - return 0; - - pfile_in_zip_read_info->stream.next_out = (Byte*)buf; - - pfile_in_zip_read_info->stream.avail_out = (uInt)len; - - if (len>pfile_in_zip_read_info->rest_read_uncompressed) - pfile_in_zip_read_info->stream.avail_out = - (uInt)pfile_in_zip_read_info->rest_read_uncompressed; - - while (pfile_in_zip_read_info->stream.avail_out>0) - { - if ((pfile_in_zip_read_info->stream.avail_in==0) && - (pfile_in_zip_read_info->rest_read_compressed>0)) - { - uInt uReadThis = UNZ_BUFSIZE; - if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; - if (uReadThis == 0) - return UNZ_EOF; - if (s->cur_file_info.compressed_size == pfile_in_zip_read_info->rest_read_compressed) - if (fseek(pfile_in_zip_read_info->file, - pfile_in_zip_read_info->pos_in_zipfile + - pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) - return UNZ_ERRNO; - if (fread(pfile_in_zip_read_info->read_buffer,uReadThis,1, - pfile_in_zip_read_info->file)!=1) - return UNZ_ERRNO; - pfile_in_zip_read_info->pos_in_zipfile += uReadThis; - - pfile_in_zip_read_info->rest_read_compressed-=uReadThis; - - pfile_in_zip_read_info->stream.next_in = - (Byte*)pfile_in_zip_read_info->read_buffer; - pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; - } - - if (pfile_in_zip_read_info->compression_method==0) - { - uInt uDoCopy,i ; - if (pfile_in_zip_read_info->stream.avail_out < - pfile_in_zip_read_info->stream.avail_in) - uDoCopy = pfile_in_zip_read_info->stream.avail_out ; - else - uDoCopy = pfile_in_zip_read_info->stream.avail_in ; - - for (i=0;istream.next_out+i) = - *(pfile_in_zip_read_info->stream.next_in+i); - - pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, - pfile_in_zip_read_info->stream.next_out, - uDoCopy); - pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; - pfile_in_zip_read_info->stream.avail_in -= uDoCopy; - pfile_in_zip_read_info->stream.avail_out -= uDoCopy; - pfile_in_zip_read_info->stream.next_out += uDoCopy; - pfile_in_zip_read_info->stream.next_in += uDoCopy; - pfile_in_zip_read_info->stream.total_out += uDoCopy; - iRead += uDoCopy; - } - else - { - uLong uTotalOutBefore,uTotalOutAfter; - const Byte *bufBefore; - uLong uOutThis; - int flush=Z_SYNC_FLUSH; - - uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; - bufBefore = pfile_in_zip_read_info->stream.next_out; - - /* - if ((pfile_in_zip_read_info->rest_read_uncompressed == - pfile_in_zip_read_info->stream.avail_out) && - (pfile_in_zip_read_info->rest_read_compressed == 0)) - flush = Z_FINISH; - */ - err=inflate(&pfile_in_zip_read_info->stream,flush); - - uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; - uOutThis = uTotalOutAfter-uTotalOutBefore; - - pfile_in_zip_read_info->crc32 = - crc32(pfile_in_zip_read_info->crc32,bufBefore, - (uInt)(uOutThis)); - - pfile_in_zip_read_info->rest_read_uncompressed -= - uOutThis; - - iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); - - if (err==Z_STREAM_END) - return (iRead==0) ? UNZ_EOF : iRead; - if (err!=Z_OK) - break; - } - } - - if (err==Z_OK) - return iRead; - return err; -} - - -/* - Give the current position in uncompressed data -*/ -extern long unztell (unzFile file) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - return (long)pfile_in_zip_read_info->stream.total_out; -} - - -/* - return 1 if the end of file was reached, 0 elsewhere -*/ -extern int unzeof (unzFile file) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - if (pfile_in_zip_read_info->rest_read_uncompressed == 0) - return 1; - else - return 0; -} - - - -/* - Read extra field from the current file (opened by unzOpenCurrentFile) - This is the static-header version of the extra field (sometimes, there is - more info in the static-header version than in the central-header) - - if buf==NULL, it return the size of the static extra field that can be read - - if buf!=NULL, len is the size of the buffer, the extra header is copied in - buf. - the return value is the number of bytes copied in buf, or (if <0) - the error code -*/ -extern int unzGetLocalExtrafield (unzFile file,void *buf,unsigned len) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - uInt read_now; - uLong size_to_read; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - size_to_read = (pfile_in_zip_read_info->size_local_extrafield - - pfile_in_zip_read_info->pos_local_extrafield); - - if (buf==NULL) - return (int)size_to_read; - - if (len>size_to_read) - read_now = (uInt)size_to_read; - else - read_now = (uInt)len ; - - if (read_now==0) - return 0; - - if (fseek(pfile_in_zip_read_info->file, - pfile_in_zip_read_info->offset_local_extrafield + - pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0) - return UNZ_ERRNO; - - if (fread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1) - return UNZ_ERRNO; - - return (int)read_now; -} - -/* - Close the file in zip opened with unzipOpenCurrentFile - Return UNZ_CRCERROR if all the file was read but the CRC is not good -*/ -extern int unzCloseCurrentFile (unzFile file) -{ - int err=UNZ_OK; - - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - - if (pfile_in_zip_read_info->rest_read_uncompressed == 0) - { - if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) - err=UNZ_CRCERROR; - } - - - free(pfile_in_zip_read_info->read_buffer); - pfile_in_zip_read_info->read_buffer = NULL; - if (pfile_in_zip_read_info->stream_initialised) - inflateEnd(&pfile_in_zip_read_info->stream); - - pfile_in_zip_read_info->stream_initialised = 0; - free(pfile_in_zip_read_info); - - s->pfile_in_zip_read=NULL; - - return err; -} - - -/* - Get the global comment string of the ZipFile, in the szComment buffer. - uSizeBuf is the size of the szComment buffer. - return the number of byte copied or an error code <0 -*/ -extern int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf) -{ - unz_s* s; - uLong uReadThis ; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - - uReadThis = uSizeBuf; - if (uReadThis>s->gi.size_comment) - uReadThis = s->gi.size_comment; - - if (fseek(s->file,s->central_pos+22,SEEK_SET)!=0) - return UNZ_ERRNO; - - if (uReadThis>0) - { - *szComment='\0'; - if (fread(szComment,(uInt)uReadThis,1,s->file)!=1) - return UNZ_ERRNO; - } - - if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) - *(szComment+s->gi.size_comment)='\0'; - return (int)uReadThis; -} - -/* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id: unzip.cpp,v 1.1.1.3 2000/01/11 16:37:27 ttimo Exp $ */ - -#ifdef DYNAMIC_CRC_TABLE - -static int crc_table_empty = 1; -static uLong crc_table[256]; -static void make_crc_table OF((void)); - -/* - Generate a table for a byte-wise 32-bit CRC calculation on the polynomial: - x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. - - Polynomials over GF(2) are represented in binary, one bit per coefficient, - with the lowest powers in the most significant bit. Then adding polynomials - is just exclusive-or, and multiplying a polynomial by x is a right shift by - one. If we call the above polynomial p, and represent a byte as the - polynomial q, also with the lowest power in the most significant bit (so the - byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, - where a mod b means the remainder after dividing a by b. - - This calculation is done using the shift-register method of multiplying and - taking the remainder. The register is initialized to zero, and for each - incoming bit, x^32 is added mod p to the register if the bit is a one (where - x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by - x (which is shifting right by one and adding x^32 mod p if the bit shifted - out is a one). We start with the highest power (least significant bit) of - q and repeat for all eight bits of q. - - The table is simply the CRC of all possible eight bit values. This is all - the information needed to generate CRC's on data a byte at a time for all - combinations of CRC register values and incoming bytes. -*/ -static void make_crc_table() -{ - uLong c; - int n, k; - uLong poly; /* polynomial exclusive-or pattern */ - /* terms of polynomial defining this crc (except x^32): */ - static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* make exclusive-or pattern from polynomial (0xedb88320L) */ - poly = 0L; - for (n = 0; n < sizeof(p)/sizeof(Byte); n++) - poly |= 1L << (31 - p[n]); - - for (n = 0; n < 256; n++) - { - c = (uLong)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[n] = c; - } - crc_table_empty = 0; -} -#else -/* ======================================================================== - * Table of CRC-32's of all single-byte values (made by make_crc_table) - */ -static const uLong crc_table[256] = { - 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, - 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, - 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, - 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, - 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, - 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, - 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, - 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, - 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, - 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, - 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, - 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, - 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, - 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, - 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, - 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, - 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, - 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, - 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, - 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, - 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, - 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, - 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, - 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, - 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, - 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, - 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, - 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, - 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, - 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, - 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, - 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, - 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, - 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, - 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, - 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, - 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, - 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, - 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, - 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, - 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, - 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, - 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, - 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, - 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, - 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, - 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, - 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, - 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, - 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, - 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, - 0x2d02ef8dL -}; -#endif - -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -const uLong * get_crc_table() -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) make_crc_table(); -#endif - return (const uLong *)crc_table; -} - -/* ========================================================================= */ -#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); -#define DO2(buf) DO1(buf); DO1(buf); -#define DO4(buf) DO2(buf); DO2(buf); -#define DO8(buf) DO4(buf); DO4(buf); - -/* ========================================================================= */ -uLong crc32(uLong crc, const Byte *buf, uInt len) -{ - if (buf == Z_NULL) return 0L; -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif - crc = crc ^ 0xffffffffL; - while (len >= 8) - { - DO8(buf); - len -= 8; - } - if (len) do { - DO1(buf); - } while (--len); - return crc ^ 0xffffffffL; -} - -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_blocks_state; -typedef struct inflate_blocks_state inflate_blocks_statef; - -extern inflate_blocks_statef * inflate_blocks_new OF(( - z_streamp z, - check_func c, /* check function */ - uInt w)); /* window size */ - -extern int inflate_blocks OF(( - inflate_blocks_statef *, - z_streamp , - int)); /* initial return code */ - -extern void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_streamp , - uLong *)); /* check value on output */ - -extern int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_streamp)); - -extern void inflate_set_dictionary OF(( - inflate_blocks_statef *s, - const Byte *d, /* dictionary */ - uInt n)); /* dictionary length */ - -extern int inflate_blocks_sync_point OF(( - inflate_blocks_statef *s)); - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -/* Table for deflate from PKZIP's appnote.txt. */ -static const uInt border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). */ - -typedef struct inflate_huft_s inflate_huft; - -struct inflate_huft_s { - union { - struct { - Byte Exop; /* number of extra bits or operation */ - Byte Bits; /* number of bits in this code or subcode */ - } what; - uInt pad; /* pad structure to a power of 2 (4 bytes for */ - } word; /* 16-bit, 8 bytes for 32-bit int's) */ - uInt base; /* literal, length base, distance base, - or table offset */ -}; - -/* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1004 huft structures (850 for length/literals - and 154 for distances, the latter actually the result of an - exhaustive search). The actual maximum is not known, but the - value below is more than safe. */ -#define MANY 1440 - -extern int inflate_trees_bits OF(( - uInt *, /* 19 code lengths */ - uInt *, /* bits tree desired/actual depth */ - inflate_huft * *, /* bits tree result */ - inflate_huft *, /* space for trees */ - z_streamp)); /* for messages */ - -extern int inflate_trees_dynamic OF(( - uInt, /* number of literal/length codes */ - uInt, /* number of distance codes */ - uInt *, /* that many (total) code lengths */ - uInt *, /* literal desired/actual bit depth */ - uInt *, /* distance desired/actual bit depth */ - inflate_huft * *, /* literal/length tree result */ - inflate_huft * *, /* distance tree result */ - inflate_huft *, /* space for trees */ - z_streamp)); /* for messages */ - -extern int inflate_trees_fixed OF(( - uInt *, /* literal desired/actual bit depth */ - uInt *, /* distance desired/actual bit depth */ - inflate_huft * *, /* literal/length tree result */ - inflate_huft * *, /* distance tree result */ - z_streamp)); /* for memory allocation */ - - -/* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_codes_state; -typedef struct inflate_codes_state inflate_codes_statef; - -extern inflate_codes_statef *inflate_codes_new OF(( - uInt, uInt, - inflate_huft *, inflate_huft *, - z_streamp )); - -extern int inflate_codes OF(( - inflate_blocks_statef *, - z_streamp , - int)); - -extern void inflate_codes_free OF(( - inflate_codes_statef *, - z_streamp )); - -/* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _INFUTIL_H -#define _INFUTIL_H - -typedef enum { - TYPE, /* get type bits (3, including end bit) */ - LENS, /* get lengths for stored */ - STORED, /* processing stored block */ - TABLE, /* get table lengths */ - BTREE, /* get bit lengths tree for a dynamic block */ - DTREE, /* get length, distance trees for a dynamic block */ - CODES, /* processing fixed or dynamic block */ - DRY, /* output remaining window bytes */ - DONE, /* finished last block, done */ - BAD} /* got a data error--stuck here */ -inflate_block_mode; - -/* inflate blocks semi-private state */ -struct inflate_blocks_state { - - /* mode */ - inflate_block_mode mode; /* current inflate_block mode */ - - /* mode dependent information */ - union { - uInt left; /* if STORED, bytes left to copy */ - struct { - uInt table; /* table lengths (14 bits) */ - uInt index; /* index into blens (or border) */ - uInt *blens; /* bit lengths of codes */ - uInt bb; /* bit length tree depth */ - inflate_huft *tb; /* bit length decoding tree */ - } trees; /* if DTREE, decoding info for trees */ - struct { - inflate_codes_statef - *codes; - } decode; /* if CODES, current state */ - } sub; /* submode */ - uInt last; /* true if this block is the last block */ - - /* mode independent information */ - uInt bitk; /* bits in bit buffer */ - uLong bitb; /* bit buffer */ - inflate_huft *hufts; /* single malloc for tree space */ - Byte *window; /* sliding window */ - Byte *end; /* one byte after sliding window */ - Byte *read; /* window read pointer */ - Byte *write; /* window write pointer */ - check_func checkfn; /* check function */ - uLong check; /* check on output */ - -}; - - -/* defines for inflate input/output */ -/* update pointers and return */ -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -/* get bytes and bits */ -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} -/* output bytes */ -#define WAVAIL (uInt)(qread?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -/* load static pointers */ -#define LOAD {LOADIN LOADOUT} - -/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ -extern uInt inflate_mask[17]; - -/* copy as much as possible from the sliding window to the output area */ -extern int inflate_flush OF(( - inflate_blocks_statef *, - z_streamp , - int)); - -#endif - - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarily, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ - - -void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c) -{ - if (c != Z_NULL) - *c = s->check; - if (s->mode == BTREE || s->mode == DTREE) - ZFREE(z, s->sub.trees.blens); - if (s->mode == CODES) - inflate_codes_free(s->sub.decode.codes, z); - s->mode = TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0); - Tracev(("inflate: blocks reset\n")); -} - - -inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w) -{ - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->hufts = - (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) - { - ZFREE(z, s); - return Z_NULL; - } - if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s->hufts); - ZFREE(z, s); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = TYPE; - Tracev(("inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, Z_NULL); - return s; -} - - -int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt t; /* temporary storage */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input based on current state */ - while (1) switch (s->mode) - { - case TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: /* stored */ - Tracev(("inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; /* go to byte boundary */ - DUMPBITS(t) - s->mode = LENS; /* get length of stored block */ - break; - case 1: /* fixed */ - Tracev(("inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - inflate_huft *tl, *td; - - inflate_trees_fixed(&bl, &bd, &tl, &td, z); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - } - DUMPBITS(3) - s->mode = CODES; - break; - case 2: /* dynamic */ - Tracev(("inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = TABLE; - break; - case 3: /* illegal */ - DUMPBITS(3) - s->mode = BAD; - z->msg = (char*)"invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case LENS: - NEEDBITS(32) - if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) - { - s->mode = BAD; - z->msg = (char*)"invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; /* dump bits */ - Tracev(("inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); - break; - case STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - zmemcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev(("inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? DRY : TYPE; - break; - case TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; -#ifndef PKZIP_BUG_WORKAROUND - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = BAD; - z->msg = (char*)"too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } -#endif - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev(("inflate: table sizes ok\n")); - s->mode = BTREE; - case BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, s->hufts, z); - if (t != Z_OK) - { - ZFREE(z, s->sub.trees.blens); - r = t; - if (r == Z_DATA_ERROR) - s->mode = BAD; - LEAVE - } - s->sub.trees.index = 0; - Tracev(("inflate: bits tree ok\n")); - s->mode = DTREE; - case DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->bits; - c = h->base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else /* c == 16..18 */ - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - ZFREE(z, s->sub.trees.blens); - s->mode = BAD; - z->msg = (char*)"invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - bl = 9; /* must be <= 9 for lookahead assumptions */ - bd = 6; /* must be <= 9 for lookahead assumptions */ - t = s->sub.trees.table; - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, - s->hufts, z); - ZFREE(z, s->sub.trees.blens); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - s->mode = BAD; - r = t; - LEAVE - } - Tracev(("inflate: trees ok\n")); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.codes = c; - } - s->mode = CODES; - case CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - LOAD - Tracev(("inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = TYPE; - break; - } - s->mode = DRY; - case DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = DONE; - case DONE: - r = Z_STREAM_END; - LEAVE - case BAD: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z) -{ - inflate_blocks_reset(s, z, Z_NULL); - ZFREE(z, s->window); - ZFREE(z, s->hufts); - ZFREE(z, s); - Tracev(("inflate: blocks freed\n")); - return Z_OK; -} - - -void inflate_set_dictionary(inflate_blocks_statef *s, const Byte *d, uInt n) -{ - zmemcpy(s->window, d, n); - s->read = s->write = s->window + n; -} - - -/* Returns true if inflate is currently at the end of a block generated - * by Z_SYNC_FLUSH or Z_FULL_FLUSH. - * IN assertion: s != Z_NULL - */ -int inflate_blocks_sync_point(inflate_blocks_statef *s) -{ - return s->mode == LENS; -} - - -/* And'ing with mask[n] masks the lower n bits */ -uInt inflate_mask[17] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - - -/* copy as much as possible from the sliding window to the output area */ -int inflate_flush(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt n; - Byte *p; - Byte *q; - - /* static copies of source and destination pointers */ - p = z->next_out; - q = s->read; - - /* compute number of bytes to copy as as end of window */ - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy as as end of window */ - zmemcpy(p, q, n); - p += n; - q += n; - - /* see if more to copy at beginning of window */ - if (q == s->end) - { - /* wrap pointers */ - q = s->window; - if (s->write == s->end) - s->write = s->window; - - /* compute bytes to copy */ - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy */ - zmemcpy(p, q, n); - p += n; - q += n; - } - - /* update pointers */ - z->next_out = p; - s->read = q; - - /* done */ - return r; -} - -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -const char inflate_copyright[] = - " inflate 1.1.3 Copyright 1995-1998 Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - - -static int huft_build OF(( - uInt *, /* code lengths in bits */ - uInt, /* number of codes */ - uInt, /* number of "simple" codes */ - const uInt *, /* list of base values for non-simple codes */ - const uInt *, /* list of extra bits for non-simple codes */ - inflate_huft **, /* result: starting table */ - uInt *, /* maximum lookup bits (returns actual) */ - inflate_huft *, /* space for trees */ - uInt *, /* hufts used in space */ - uInt * )); /* space for values */ - -/* Tables for deflate from PKZIP's appnote.txt. */ -static const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* see note #13 above about 258 */ -static const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ -static const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -static const uInt cpdext[30] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ -#define BMAX 15 /* maximum bit length of any code */ - -static int huft_build(uInt *b, uInt n, uInt s, const uInt *d, const uInt *e, inflate_huft ** t, uInt *m, inflate_huft *hp, uInt *hn, uInt *v) -//uInt *b; /* code lengths in bits (all assumed <= BMAX) */ -//uInt n; /* number of codes (assumed <= 288) */ -//uInt s; /* number of simple-valued codes (0..s-1) */ -//const uInt *d; /* list of base values for non-simple codes */ -//const uInt *e; /* list of extra bits for non-simple codes */ -//inflate_huft ** t; /* result: starting table */ -//uInt *m; /* maximum lookup bits, returns actual */ -//inflate_huft *hp; /* space for trees */ -//uInt *hn; /* hufts used in space */ -//uInt *v; /* working area: values in order of bit length */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR - if the given code set is incomplete (the tables are still built in this - case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of - lengths), or Z_MEM_ERROR if not enough memory. */ -{ - - uInt a; /* counter for codes of length k */ - uInt c[BMAX+1]; /* bit length count table */ - uInt f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register uInt i; /* counter, current code */ - register uInt j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */ - register uInt *p; /* pointer into c[], b[], or v[] */ - inflate_huft *q; /* points to current table */ - struct inflate_huft_s r; /* table entry for structure assignment */ - inflate_huft *u[BMAX]; /* table stack */ - register int w; /* bits before this table == (l * h) */ - uInt x[BMAX+1]; /* bit offsets, then code stack */ - uInt *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - uInt z; /* number of entries in current table */ - - - /* Generate counts for each bit length */ - p = c; -#define C0 *p++ = 0; -#define C2 C0 C0 C0 C0 -#define C4 C2 C2 C2 C2 - C4 /* clear c[]--assume BMAX+1 is 16 */ - p = b; i = n; - do { - c[*p++]++; /* assume all entries <= BMAX */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (inflate_huft *)Z_NULL; - *m = 0; - return Z_OK; - } - - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((uInt)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((uInt)l > i) - l = i; - *m = l; - - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return Z_DATA_ERROR; - if ((y -= c[i]) < 0) - return Z_DATA_ERROR; - c[i] += y; - - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - n = x[g]; /* set n to length of v */ - - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ - q = (inflate_huft *)Z_NULL; /* ditto */ - z = 0; /* ditto */ - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { - a = c[k]; - while (a--) - { - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = g - w; - z = z > (uInt)l ? l : z; /* table size upper limit */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - if (j < z) - while (++j < z) /* try smaller tables up to z bits */ - { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ - } - } - z = 1 << j; /* table entries for j-bit table */ - - /* allocate new table */ - if (*hn + z > MANY) /* (note: doesn't matter for fixed) */ - return Z_MEM_ERROR; /* not enough memory */ - u[h] = q = hp + *hn; - *hn += z; - - /* connect to last table, if there is one */ - if (h) - { - x[h] = i; /* save pattern for backing up */ - r.bits = (Byte)l; /* bits to dump before this table */ - r.exop = (Byte)j; /* bits in this table */ - j = i >> (w - l); - r.base = (uInt)(q - u[h-1] - j); /* offset to this table */ - u[h-1][j] = r; /* connect to last table */ - } - else - *t = q; /* first table is returned result */ - } - - /* set up table entry in r */ - r.bits = (Byte)(k - w); - if (p >= v + n) - r.exop = 128 + 64; /* out of values--invalid code */ - else if (*p < s) - { - r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ - r.base = *p++; /* simple code is just the value */ - } - else - { - r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ - r.base = d[*p++ - s]; - } - - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - /* backup over finished tables */ - mask = (1 << w) - 1; /* needed on HP, cc -O bug */ - while ((i & mask) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - mask = (1 << w) - 1; - } - } - } - - - /* Return Z_BUF_ERROR if we were given an incomplete table */ - return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; -} - - -int inflate_trees_bits(uInt *c, uInt *bb, inflate_huft * *tb, inflate_huft *hp, z_streamp z) -//uInt *c; /* 19 code lengths */ -//uInt *bb; /* bits tree desired/actual depth */ -//inflate_huft * *tb; /* bits tree result */ -//inflate_huft *hp; /* space for trees */ -//z_streamp z; /* for messages */ -{ - int r; - uInt hn = 0; /* hufts used in space */ - uInt *v; /* work area for huft_build */ - - if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) - return Z_MEM_ERROR; - r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL, - tb, bb, hp, &hn, v); - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR || *bb == 0) - { - z->msg = (char*)"incomplete dynamic bit lengths tree"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; -} - - -int inflate_trees_dynamic(uInt nl, uInt nd, uInt *c, uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, inflate_huft *hp, z_streamp z) -//uInt nl; /* number of literal/length codes */ -//uInt nd; /* number of distance codes */ -//uInt *c; /* that many (total) code lengths */ -//uInt *bl; /* literal desired/actual bit depth */ -//uInt *bd; /* distance desired/actual bit depth */ -//inflate_huft * *tl; /* literal/length tree result */ -//inflate_huft * *td; /* distance tree result */ -//inflate_huft *hp; /* space for trees */ -//z_streamp z; /* for messages */ -{ - int r; - uInt hn = 0; /* hufts used in space */ - uInt *v; /* work area for huft_build */ - - /* allocate work area */ - if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) - return Z_MEM_ERROR; - - /* build literal/length tree */ - r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); - if (r != Z_OK || *bl == 0) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed literal/length tree"; - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"incomplete literal/length tree"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; - } - - /* build distance tree */ - r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); - if (r != Z_OK || (*bd == 0 && nl > 257)) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed distance tree"; - else if (r == Z_BUF_ERROR) { -#ifdef PKZIP_BUG_WORKAROUND - r = Z_OK; - } -#else - z->msg = (char*)"incomplete distance tree"; - r = Z_DATA_ERROR; - } - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"empty distance tree with lengths"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; -#endif - } - - /* done */ - ZFREE(z, v); - return Z_OK; -} - -/* inffixed.h -- table for decoding fixed codes - * Generated automatically by the maketree.c program - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -static uInt fixed_bl = 9; -static uInt fixed_bd = 5; -static inflate_huft fixed_tl[] = { - {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, - {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192}, - {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160}, - {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224}, - {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144}, - {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208}, - {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176}, - {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240}, - {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, - {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200}, - {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168}, - {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232}, - {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152}, - {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216}, - {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184}, - {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248}, - {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, - {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196}, - {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164}, - {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228}, - {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148}, - {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212}, - {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180}, - {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244}, - {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204}, - {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172}, - {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236}, - {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156}, - {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220}, - {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188}, - {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252}, - {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, - {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194}, - {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162}, - {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226}, - {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146}, - {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210}, - {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178}, - {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242}, - {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, - {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202}, - {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170}, - {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234}, - {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154}, - {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218}, - {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186}, - {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250}, - {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, - {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198}, - {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166}, - {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230}, - {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150}, - {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214}, - {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182}, - {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246}, - {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206}, - {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174}, - {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238}, - {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158}, - {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222}, - {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190}, - {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254}, - {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, - {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193}, - {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161}, - {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225}, - {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145}, - {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209}, - {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177}, - {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241}, - {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, - {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201}, - {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169}, - {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233}, - {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153}, - {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217}, - {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185}, - {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249}, - {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, - {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197}, - {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165}, - {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229}, - {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149}, - {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213}, - {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181}, - {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245}, - {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205}, - {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173}, - {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237}, - {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157}, - {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221}, - {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189}, - {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253}, - {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, - {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195}, - {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163}, - {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227}, - {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147}, - {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211}, - {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179}, - {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243}, - {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, - {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203}, - {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171}, - {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235}, - {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155}, - {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219}, - {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187}, - {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251}, - {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, - {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199}, - {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167}, - {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231}, - {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151}, - {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215}, - {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183}, - {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247}, - {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207}, - {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175}, - {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239}, - {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159}, - {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223}, - {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191}, - {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255} - }; -static inflate_huft fixed_td[] = { - {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097}, - {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385}, - {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193}, - {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577}, - {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145}, - {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577}, - {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289}, - {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577} - }; - -int inflate_trees_fixed(uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, z_streamp z) -//uInt *bl; /* literal desired/actual bit depth */ -//uInt *bd; /* distance desired/actual bit depth */ -//inflate_huft * *tl; /* literal/length tree result */ -//inflate_huft * *td; /* distance tree result */ -//z_streamp z; /* for memory allocation */ -{ - *bl = fixed_bl; - *bd = fixed_bd; - *tl = fixed_tl; - *td = fixed_td; - return Z_OK; -} - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -/* macros for bit input with no checking and for returning unused bytes */ -#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<avail_in-n;c=(k>>3)>3:c;n+=c;p-=c;k-=c<<3;} - -/* Called with number of bytes left to write in window at least 258 - (the maximum string length) and number of input bytes available - at least ten. The ten bytes are six bytes for the longest length/ - distance pair plus four bytes for overloading the bit buffer. */ - -int inflate_fast(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, inflate_blocks_statef *s, z_streamp z) -{ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - uInt ml; /* mask for literal/length tree */ - uInt md; /* mask for distance tree */ - uInt c; /* bytes to copy */ - uInt d; /* distance back to copy from */ - Byte *r; /* copy source pointer */ - - /* load input, output, bit values */ - LOAD - - /* initialize masks */ - ml = inflate_mask[bl]; - md = inflate_mask[bd]; - - /* do until not enough input or output space for fast loop */ - do { /* assume called with m >= 258 && n >= 10 */ - /* get literal/length code */ - GRABBITS(20) /* max bits for literal/length code */ - if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - continue; - } - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits for length */ - e &= 15; - c = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv(("inflate: * length %u\n", c)); - - /* decode distance base of block to copy */ - GRABBITS(15); /* max bits for distance code */ - e = (t = td + ((uInt)b & md))->exop; - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits to add to distance base */ - e &= 15; - GRABBITS(e) /* get extra bits (up to 13) */ - d = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv(("inflate: * distance %u\n", d)); - - /* do the copy */ - m -= c; - if ((uInt)(q - s->window) >= d) /* offset before dest */ - { /* just copy */ - r = q - d; - *q++ = *r++; c--; /* minimum count is three, */ - *q++ = *r++; c--; /* so unroll loop a little */ - } - else /* else offset after destination */ - { - e = d - (uInt)(q - s->window); /* bytes from offset to end */ - r = s->end - e; /* pointer to offset */ - if (c > e) /* if source crosses, */ - { - c -= e; /* copy to end of window */ - do { - *q++ = *r++; - } while (--e); - r = s->window; /* copy rest from start of window */ - } - } - do { /* copy all or what's left */ - *q++ = *r++; - } while (--c); - break; - } - else if ((e & 64) == 0) - { - t += t->base; - e = (t += ((uInt)b & inflate_mask[e]))->exop; - } - else - { - z->msg = (char*)"invalid distance code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - break; - } - if ((e & 64) == 0) - { - t += t->base; - if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - break; - } - } - else if (e & 32) - { - Tracevv(("inflate: * end of block\n")); - UNGRAB - UPDATE - return Z_STREAM_END; - } - else - { - z->msg = (char*)"invalid literal/length code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - } while (m >= 258 && n >= 10); - - /* not enough input or output--restore pointers and return */ - UNGRAB - UPDATE - return Z_OK; -} - -/* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - START, /* x: set up for LEN */ - LEN, /* i: get length/literal/eob next */ - LENEXT, /* i: getting length extra (have base) */ - DIST, /* i: get distance next */ - DISTEXT, /* i: getting distance extra */ - COPY, /* o: copying bytes in window, waiting for space */ - LIT, /* o: got literal, waiting for output space */ - WASH, /* o: got eob, possibly still output waiting */ - END, /* x: got eob and all data flushed */ - BADCODE} /* x: got error */ -inflate_codes_mode; - -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - inflate_codes_mode mode; /* current inflate_codes mode */ - - /* mode dependent information */ - uInt len; - union { - struct { - inflate_huft *tree; /* pointer into tree */ - uInt need; /* bits needed */ - } code; /* if LEN or DIST, where in tree */ - uInt lit; /* if LIT, literal */ - struct { - uInt get; /* bits to get for extra */ - uInt dist; /* distance back to copy from */ - } copy; /* if EXT or COPY, where and how much */ - } sub; /* submode */ - - /* mode independent information */ - Byte lbits; /* ltree bits decoded per branch */ - Byte dbits; /* dtree bits decoder per branch */ - inflate_huft *ltree; /* literal/length/eob tree */ - inflate_huft *dtree; /* distance tree */ - -}; - - -inflate_codes_statef *inflate_codes_new(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, z_streamp z) -{ - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev(("inflate: codes new\n")); - } - return c; -} - - -int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt j; /* temporary storage */ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - Byte *f; /* pointer to copy strings from */ - inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input and output based on current state */ - while (1) switch (c->mode) - { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - case START: /* x: set up for LEN */ -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif /* !SLOW */ - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: /* i: get length/literal/eob next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) /* literal */ - { - c->sub.lit = t->base; - Tracevv((t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) /* length */ - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - if (e & 32) /* end of block */ - { - Tracevv(("inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: /* i: getting length extra (have base) */ - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv(("inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: /* i: get distance next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) /* distance */ - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: /* i: getting distance extra */ - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv(("inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: /* o: copying bytes in window, waiting for space */ -#ifndef __TURBOC__ /* Turbo C bug for following expression */ - f = (uInt)(q - s->window) < c->sub.copy.dist ? - s->end - (c->sub.copy.dist - (q - s->window)) : - q - c->sub.copy.dist; -#else - f = q - c->sub.copy.dist; - if ((uInt)(q - s->window) < c->sub.copy.dist) - f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); -#endif - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: /* o: got literal, waiting for output space */ - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: /* o: got eob, possibly more output */ - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: /* x: got error */ - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -#ifdef NEED_DUMMY_RETURN - return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ -#endif -} - - -void inflate_codes_free(inflate_codes_statef *c, z_streamp z) -{ - ZFREE(z, c); - Tracev(("inflate: codes free\n")); -} - -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#define BASE 65521L /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#undef DO1 -#undef DO2 -#undef DO4 -#undef DO8 - -#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* ========================================================================= */ -uLong adler32(uLong adler, const Byte *buf, uInt len) -{ - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; - - if (buf == Z_NULL) return 1L; - - while (len > 0) { - k = len < NMAX ? len : NMAX; - len -= k; - while (k >= 16) { - DO16(buf); - buf += 16; - k -= 16; - } - if (k != 0) do { - s1 += *buf++; - s2 += s1; - } while (--k); - s1 %= BASE; - s2 %= BASE; - } - return (s2 << 16) | s1; -} - -/* @(#) $Id: unzip.cpp,v 1.1.1.3 2000/01/11 16:37:27 ttimo Exp $ */ - -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -extern inflate_blocks_statef * inflate_blocks_new OF(( - z_streamp z, - check_func c, /* check function */ - uInt w)); /* window size */ - -extern int inflate_blocks OF(( - inflate_blocks_statef *, - z_streamp , - int)); /* initial return code */ - -extern void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_streamp , - uLong *)); /* check value on output */ - -extern int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_streamp)); - -extern void inflate_set_dictionary OF(( - inflate_blocks_statef *s, - const Byte *d, /* dictionary */ - uInt n)); /* dictionary length */ - -extern int inflate_blocks_sync_point OF(( - inflate_blocks_statef *s)); - -typedef enum { - imMETHOD, /* waiting for method byte */ - imFLAG, /* waiting for flag byte */ - imDICT4, /* four dictionary check bytes to go */ - imDICT3, /* three dictionary check bytes to go */ - imDICT2, /* two dictionary check bytes to go */ - imDICT1, /* one dictionary check byte to go */ - imDICT0, /* waiting for inflateSetDictionary */ - imBLOCKS, /* decompressing blocks */ - imCHECK4, /* four check bytes to go */ - imCHECK3, /* three check bytes to go */ - imCHECK2, /* two check bytes to go */ - imCHECK1, /* one check byte to go */ - imDONE, /* finished check, done */ - imBAD} /* got an error--stay here */ -inflate_mode; - -/* inflate private state */ -struct internal_state { - - /* mode */ - inflate_mode mode; /* current inflate mode */ - - /* mode dependent information */ - union { - uInt method; /* if FLAGS, method byte */ - struct { - uLong was; /* computed check value */ - uLong need; /* stream check value */ - } check; /* if CHECK, check values to compare */ - uInt marker; /* if BAD, inflateSync's marker bytes count */ - } sub; /* submode */ - - /* mode independent information */ - int nowrap; /* flag for no wrapper */ - uInt wbits; /* log2(window size) (8..15, defaults to 15) */ - inflate_blocks_statef - *blocks; /* current inflate_blocks state */ - -}; - - -int inflateReset(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - z->total_in = z->total_out = 0; - z->msg = Z_NULL; - z->state->mode = z->state->nowrap ? imBLOCKS : imMETHOD; - inflate_blocks_reset(z->state->blocks, z, Z_NULL); - Tracev(("inflate: reset\n")); - return Z_OK; -} - - -int inflateEnd(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z); - ZFREE(z, z->state); - z->state = Z_NULL; - Tracev(("inflate: end\n")); - return Z_OK; -} - - - -int inflateInit2_(z_streamp z, int w, const char *version, int stream_size) -{ - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != sizeof(z_stream)) - return Z_VERSION_ERROR; - - /* initialize state */ - if (z == Z_NULL) - return Z_STREAM_ERROR; - z->msg = Z_NULL; - if (z->zalloc == Z_NULL) - { - z->zalloc = (void *(*)(void *, unsigned, unsigned))zcalloc; - z->opaque = (voidp)0; - } - if (z->zfree == Z_NULL) z->zfree = (void (*)(void *, void *))zcfree; - if ((z->state = (struct internal_state *) - ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) - return Z_MEM_ERROR; - z->state->blocks = Z_NULL; - - /* handle undocumented nowrap option (no zlib header or check) */ - z->state->nowrap = 0; - if (w < 0) - { - w = - w; - z->state->nowrap = 1; - } - - /* set window size */ - if (w < 8 || w > 15) - { - inflateEnd(z); - return Z_STREAM_ERROR; - } - z->state->wbits = (uInt)w; - - /* create inflate_blocks state */ - if ((z->state->blocks = - inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) - == Z_NULL) - { - inflateEnd(z); - return Z_MEM_ERROR; - } - Tracev(("inflate: allocated\n")); - - /* reset state */ - inflateReset(z); - return Z_OK; -} - - -int inflateInit_(z_streamp z, const char *version, int stream_size) -{ - return inflateInit2_(z, DEF_WBITS, version, stream_size); -} - - -#define iNEEDBYTE {if(z->avail_in==0)return r;r=f;} -#define iNEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) - -int inflate(z_streamp z, int f) -{ - int r; - uInt b; - - if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) - return Z_STREAM_ERROR; - f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; - r = Z_BUF_ERROR; - while (1) switch (z->state->mode) - { - case imMETHOD: - iNEEDBYTE - if (((z->state->sub.method = iNEXTBYTE) & 0xf) != Z_DEFLATED) - { - z->state->mode = imBAD; - z->msg = (char*)"unknown compression method"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if ((z->state->sub.method >> 4) + 8 > z->state->wbits) - { - z->state->mode = imBAD; - z->msg = (char*)"invalid window size"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - z->state->mode = imFLAG; - case imFLAG: - iNEEDBYTE - b = iNEXTBYTE; - if (((z->state->sub.method << 8) + b) % 31) - { - z->state->mode = imBAD; - z->msg = (char*)"incorrect header check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Tracev(("inflate: zlib header ok\n")); - if (!(b & PRESET_DICT)) - { - z->state->mode = imBLOCKS; - break; - } - z->state->mode = imDICT4; - case imDICT4: - iNEEDBYTE - z->state->sub.check.need = (uLong)iNEXTBYTE << 24; - z->state->mode = imDICT3; - case imDICT3: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 16; - z->state->mode = imDICT2; - case imDICT2: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 8; - z->state->mode = imDICT1; - case imDICT1: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE; - z->adler = z->state->sub.check.need; - z->state->mode = imDICT0; - return Z_NEED_DICT; - case imDICT0: - z->state->mode = imBAD; - z->msg = (char*)"need dictionary"; - z->state->sub.marker = 0; /* can try inflateSync */ - return Z_STREAM_ERROR; - case imBLOCKS: - r = inflate_blocks(z->state->blocks, z, r); - if (r == Z_DATA_ERROR) - { - z->state->mode = imBAD; - z->state->sub.marker = 0; /* can try inflateSync */ - break; - } - if (r == Z_OK) - r = f; - if (r != Z_STREAM_END) - return r; - r = f; - inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); - if (z->state->nowrap) - { - z->state->mode = imDONE; - break; - } - z->state->mode = imCHECK4; - case imCHECK4: - iNEEDBYTE - z->state->sub.check.need = (uLong)iNEXTBYTE << 24; - z->state->mode = imCHECK3; - case imCHECK3: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 16; - z->state->mode = imCHECK2; - case imCHECK2: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 8; - z->state->mode = imCHECK1; - case imCHECK1: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE; - - if (z->state->sub.check.was != z->state->sub.check.need) - { - z->state->mode = imBAD; - z->msg = (char*)"incorrect data check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Tracev(("inflate: zlib check ok\n")); - z->state->mode = imDONE; - case imDONE: - return Z_STREAM_END; - case imBAD: - return Z_DATA_ERROR; - default: - return Z_STREAM_ERROR; - } -#ifdef NEED_DUMMY_RETURN - return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ -#endif -} - - -int inflateSetDictionary(z_streamp z, const Byte *dictionary, uInt dictLength) -{ - uInt length = dictLength; - - if (z == Z_NULL || z->state == Z_NULL || z->state->mode != imDICT0) - return Z_STREAM_ERROR; - - if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; - z->adler = 1L; - - if (length >= ((uInt)1<state->wbits)) - { - length = (1<state->wbits)-1; - dictionary += dictLength - length; - } - inflate_set_dictionary(z->state->blocks, dictionary, length); - z->state->mode = imBLOCKS; - return Z_OK; -} - - -int inflateSync(z_streamp z) -{ - uInt n; /* number of bytes to look at */ - Byte *p; /* pointer to bytes */ - uInt m; /* number of marker bytes found in a row */ - uLong r, w; /* temporaries to save total_in and total_out */ - - /* set up */ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->mode != imBAD) - { - z->state->mode = imBAD; - z->state->sub.marker = 0; - } - if ((n = z->avail_in) == 0) - return Z_BUF_ERROR; - p = z->next_in; - m = z->state->sub.marker; - - /* search */ - while (n && m < 4) - { - static const Byte mark[4] = {0, 0, 0xff, 0xff}; - if (*p == mark[m]) - m++; - else if (*p) - m = 0; - else - m = 4 - m; - p++, n--; - } - - /* restore */ - z->total_in += p - z->next_in; - z->next_in = p; - z->avail_in = n; - z->state->sub.marker = m; - - /* return no joy or set up to restart on a new block */ - if (m != 4) - return Z_DATA_ERROR; - r = z->total_in; w = z->total_out; - inflateReset(z); - z->total_in = r; z->total_out = w; - z->state->mode = imBLOCKS; - return Z_OK; -} - - -/* Returns true if inflate is currently at the end of a block generated - * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH - * but removes the length bytes of the resulting empty stored block. When - * decompressing, PPP checks that at the end of input packet, inflate is - * waiting for these length bytes. - */ -int inflateSyncPoint(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL) - return Z_STREAM_ERROR; - return inflate_blocks_sync_point(z->state->blocks); -} - -voidp zcalloc (voidp opaque, unsigned items, unsigned size) -{ - if (opaque) items += size - size; /* make compiler happy */ - return (voidp)malloc(items*size); -} - -void zcfree (voidp opaque, voidp ptr) -{ - free(ptr); - if (opaque) return; /* make compiler happy */ -} - +/***************************************************************************** + * name: unzip.c + * + * desc: IO on .zip files using portions of zlib + * + * $Archive: /source/code/qcommon/unzip.c $ + * $Author: ttimo $ + * $Revision: 1.1.1.3 $ + * $Modtime: 10/19/99 3:59p $ + * $Date: 2000/01/11 16:37:27 $ + * + *****************************************************************************/ + +#include +#include +#include +#include "unzip.h" +//#include "cmdlib.h" + +/* unzip.h -- IO for uncompress .zip files using zlib + Version 0.15 beta, Mar 19th, 1998, + + Copyright (C) 1998 Gilles Vollant + + This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g + WinZip, InfoZip tools and compatible. + Encryption and multi volume ZipFile (span) are not supported. + Old compressions used by old PKZip 1.x are not supported + + THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE + CAN CHANGE IN FUTURE VERSION !! + I WAIT FEEDBACK at mail info@winimage.com + Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + +*/ +/* for more info about .ZIP format, see + ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip + PkWare has also a specification at : + ftp://ftp.pkware.com/probdesc.zip */ + +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.1.3, July 9th, 1998 + + Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-1998 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id: unzip.cpp,v 1.1.1.3 2000/01/11 16:37:27 ttimo Exp $ */ + +#ifndef _ZCONF_H +#define _ZCONF_H + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +#define OF(args) args +#endif + +typedef unsigned char Byte; /* 8 bits */ +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ +typedef Byte *voidp; + +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#endif /* _ZCONF_H */ + +#define ZLIB_VERSION "1.1.3" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +/* Allowed flush values; see deflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Possible values of the data_type field */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +const char * zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +int deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +int deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so (that is, total_in bytes). + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). +*/ + + +int deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +int inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +int inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_SYNC_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise + it sets strm->adler to the adler32 checksum of all output produced + so (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. +*/ + + +int inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +int deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +int deflateSetDictionary OF((z_streamp strm, + const Byte *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. + + Upon return of this function, strm->adler is set to the Adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +int deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +int deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +int deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +/* +int inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative + memLevel). msg is set to null if there is no error message. inflateInit2 + does not perform any decompression apart from reading the zlib header if + present: this will be done by inflate(). (So next_in and avail_in may be + modified, but next_out and avail_out are unchanged.) +*/ + +int inflateSetDictionary OF((z_streamp strm, + const Byte *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate + if this call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler32 value returned by this call of + inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary). + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +int inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +int inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +int compress OF((Byte *dest, uLong *destLen, + const Byte *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +int compress2 OF((Byte *dest, uLong *destLen, + const Byte *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +int uncompress OF((Byte *dest, uLong *destLen, + const Byte *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ + + +typedef voidp gzFile; + +gzFile gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h". (See the description + of deflateInit2 for more information about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +gzFile gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +int gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +int gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +int gzwrite OF((gzFile file, + const voidp buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +int gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ + +int gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +char * gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +int gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +int gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +int gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +long gzseek OF((gzFile file, + long offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +int gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +long gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +int gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +int gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +const char * gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +uLong adler32 OF((uLong adler, const Byte *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +uLong crc32 OF((uLong crc, const Byte *buf, uInt len)); +/* + Update a running crc with the bytes buf[0..len-1] and return the updated + crc. If buf is NULL, this function returns the required initial value + for the crc. Pre- and post-conditioning (one's complement) is performed + within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +// private stuff to not include cmdlib.h +/* +============================================================================ + + BYTE ORDER FUNCTIONS + +============================================================================ +*/ + +#ifdef _SGI_SOURCE +#define __BIG_ENDIAN__ +#endif + +#ifdef __BIG_ENDIAN__ + +short __LittleShort (short l) +{ + byte b1,b2; + + b1 = l&255; + b2 = (l>>8)&255; + + return (b1<<8) + b2; +} + +short __BigShort (short l) +{ + return l; +} + + +int __LittleLong (int l) +{ + byte b1,b2,b3,b4; + + b1 = l&255; + b2 = (l>>8)&255; + b3 = (l>>16)&255; + b4 = (l>>24)&255; + + return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; +} + +int __BigLong (int l) +{ + return l; +} + + +float __LittleFloat (float l) +{ + union {byte b[4]; float f;} in, out; + + in.f = l; + out.b[0] = in.b[3]; + out.b[1] = in.b[2]; + out.b[2] = in.b[1]; + out.b[3] = in.b[0]; + + return out.f; +} + +float __BigFloat (float l) +{ + return l; +} + + +#else + + +short __BigShort (short l) +{ + byte b1,b2; + + b1 = l&255; + b2 = (l>>8)&255; + + return (b1<<8) + b2; +} + +short __LittleShort (short l) +{ + return l; +} + + +int __BigLong (int l) +{ + byte b1,b2,b3,b4; + + b1 = l&255; + b2 = (l>>8)&255; + b3 = (l>>16)&255; + b4 = (l>>24)&255; + + return ((int)b1<<24) + ((int)b2<<16) + ((int)b3<<8) + b4; +} + +int __LittleLong (int l) +{ + return l; +} + +float __BigFloat (float l) +{ + union {byte b[4]; float f;} in, out; + + in.f = l; + out.b[0] = in.b[3]; + out.b[1] = in.b[2]; + out.b[2] = in.b[1]; + out.b[3] = in.b[0]; + + return out.f; +} + +float __LittleFloat (float l) +{ + return l; +} + + + +#endif + + + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +int deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +int inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +int deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +int inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + + +const char * zError OF((int err)); +int inflateSyncPoint OF((z_streamp z)); +const uLong * get_crc_table OF((void)); + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = (char*)ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + + /* Common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#ifdef HAVE_STRERROR + extern char *strerror OF((int)); +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + +#define zmemcpy memcpy +#define zmemcmp memcmp +#define zmemzero(dest, len) memset(dest, 0, len) + +/* Diagnostic functions */ +#ifdef _ZIP_DEBUG_ + int z_verbose = 0; +# define Assert(cond,msg) assert(cond); + //{if(!(cond)) Sys_Error(msg);} +# define Trace(x) {if (z_verbose>=0) Sys_Error x ;} +# define Tracev(x) {if (z_verbose>0) Sys_Error x ;} +# define Tracevv(x) {if (z_verbose>1) Sys_Error x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) Sys_Error x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) Sys_Error x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (*check_func) OF((uLong check, const Byte *buf, uInt len)); +voidp zcalloc OF((voidp opaque, unsigned items, unsigned size)); +void zcfree OF((voidp opaque, voidp ptr)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidp)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + + +#if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) && \ + !defined(CASESENSITIVITYDEFAULT_NO) +#define CASESENSITIVITYDEFAULT_NO +#endif + + +#ifndef UNZ_BUFSIZE +#define UNZ_BUFSIZE (65536) +#endif + +#ifndef UNZ_MAXFILENAMEINZIP +#define UNZ_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) + + + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ + +/* +static int unzlocal_getByte(FILE *fin,int *pi) +{ + unsigned char c; + int err = fread(&c, 1, 1, fin); + if (err==1) + { + *pi = (int)c; + return UNZ_OK; + } + else + { + if (ferror(fin)) + return UNZ_ERRNO; + else + return UNZ_EOF; + } +} +*/ + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +static int unzlocal_getShort (FILE* fin, uLong *pX) +{ + short v; + + fread( &v, sizeof(v), 1, fin ); + + *pX = __LittleShort( v); + return UNZ_OK; + +/* + uLong x ; + int i; + int err; + + err = unzlocal_getByte(fin,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +*/ +} + +static int unzlocal_getLong (FILE *fin, uLong *pX) +{ + int v; + + fread( &v, sizeof(v), 1, fin ); + + *pX = __LittleLong( v); + return UNZ_OK; + +/* + uLong x ; + int i; + int err; + + err = unzlocal_getByte(fin,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<16; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<24; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +*/ +} + + +/* My own strcmpi / strcasecmp */ +static int strcmpcasenosensitive_internal (const char* fileName1,const char* fileName2) +{ + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1c2) + return 1; + } +} + + +#ifdef CASESENSITIVITYDEFAULT_NO +#define CASESENSITIVITYDEFAULTVALUE 2 +#else +#define CASESENSITIVITYDEFAULTVALUE 1 +#endif + +#ifndef STRCMPCASENOSENTIVEFUNCTION +#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal +#endif + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) + +*/ +extern int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity) +{ + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); + + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} + +#define BUFREADCOMMENT (0x400) + +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +static uLong unzlocal_SearchCentralDir(FILE *fin) +{ + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (fseek(fin,0,SEEK_END) != 0) + return 0; + + + uSizeFile = ftell( fin ); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)malloc(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (fseek(fin,uReadPos,SEEK_SET)!=0) + break; + + if (fread(buf,(uInt)uReadSize,1,fin)!=1) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + free(buf); + return uPosFound; +} + +extern unzFile unzReOpen (const char* path, unzFile file) +{ + unz_s *s; + FILE * fin; + + fin=fopen(path,"rb"); + if (fin==NULL) + return NULL; + + s=(unz_s*)malloc(sizeof(unz_s)); + memcpy(s, (unz_s*)file, sizeof(unz_s)); + + s->file = fin; + return (unzFile)s; +} + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\test\\zlib109.zip" or on an Unix computer + "zlib/zlib109.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ +extern unzFile unzOpen (const char* path) +{ + unz_s us; + unz_s *s; + uLong central_pos,uL; + FILE * fin ; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + fin=fopen(path,"rb"); + if (fin==NULL) + return NULL; + + central_pos = unzlocal_SearchCentralDir(fin); + if (central_pos==0) + err=UNZ_ERRNO; + + if (fseek(fin,central_pos,SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unzlocal_getLong(fin,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir */ + if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* zipfile comment length */ + if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((central_pospfile_in_zip_read!=NULL) + unzCloseCurrentFile(file); + + fclose(s->file); + free(s); + return UNZ_OK; +} + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ +extern int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info) +{ + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; +} + + +/* + Translate date/time from Dos format to tm_unz (readable more easilty) +*/ +static void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm) +{ + uLong uDate; + uDate = (uLong)(ulDosDate>>16); + ptm->tm_mday = (uInt)(uDate&0x1f) ; + ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; + ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; + + ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); + ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; + ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; +} + +/* + Get Info about the current file in the zipfile, with internal only info +*/ +static int unzlocal_GetCurrentFileInfoInternal (unzFile file, + unz_file_info *pfile_info, + unz_file_info_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize) +{ + unz_s* s; + unz_file_info file_info; + unz_file_info_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (fseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) + if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + + if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; + + unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); + + if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename0) && (fileNameBufferSize>0)) + if (fread(szFileName,(uInt)uSizeRead,1,s->file)!=1) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + + if ((err==UNZ_OK) && (extraField!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_extrafile,lSeek,SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) + if (fread(extraField,(uInt)uSizeRead,1,s->file)!=1) + err=UNZ_ERRNO; + lSeek += file_info.size_file_extra - uSizeRead; + } + else + lSeek+=file_info.size_file_extra; + + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_commentfile,lSeek,SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) + if (fread(szComment,(uInt)uSizeRead,1,s->file)!=1) + err=UNZ_ERRNO; + lSeek+=file_info.size_file_comment - uSizeRead; + } + else + lSeek+=file_info.size_file_comment; + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; +} + + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. +*/ +extern int unzGetCurrentFileInfo ( unzFile file, unz_file_info *pfile_info, + char *szFileName, uLong fileNameBufferSize, + void *extraField, uLong extraFieldBufferSize, + char *szComment, uLong commentBufferSize) +{ + return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); +} + +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ +extern int unzGoToFirstFile (unzFile file) +{ + int err=UNZ_OK; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ +extern int unzGoToNextFile (unzFile file) +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzipStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ +extern int unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity) +{ + unz_s* s; + int err; + + + uLong num_fileSaved; + uLong pos_in_central_dirSaved; + + + if (file==NULL) + return UNZ_PARAMERROR; + + if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) + return UNZ_PARAMERROR; + + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + + err = unzGoToFirstFile(file); + + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + unzGetCurrentFileInfo(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + return err; +} + + +/* + Read the static header of the current zipfile + Check the coherency of the static header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in static header + (filename and size of extra field data) +*/ +static int unzlocal_CheckCurrentFileCoherencyHeader (unz_s* s, uInt* piSizeVar, + uLong *poffset_local_extrafield, + uInt *psize_local_extrafield) +{ + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; + + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; + + if (fseek(s->file,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,SEEK_SET)!=0) + return UNZ_ERRNO; + + + if (err==UNZ_OK) + if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + + if (unzlocal_getShort(s->file,&uData) != UNZ_OK) + err=UNZ_ERRNO; +/* + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; +*/ + if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; + + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + + if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; + + *piSizeVar += (uInt)size_filename; + + if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; + + *piSizeVar += (uInt)size_extra_field; + + return err; +} + +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int unzOpenCurrentFile (unzFile file) +{ + int err=UNZ_OK; + int Store; + uInt iSizeVar; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uLong offset_local_extrafield; /* offset of the static extra field */ + uInt size_local_extrafield; /* size of the static extra field */ + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; + + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); + + if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, + &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; + + pfile_in_zip_read_info = (file_in_zip_read_info_s*) + malloc(sizeof(file_in_zip_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; + + pfile_in_zip_read_info->read_buffer=(char*)malloc(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + + if (pfile_in_zip_read_info->read_buffer==NULL) + { + free(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } + + pfile_in_zip_read_info->stream_initialised=0; + + if ((s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + Store = s->cur_file_info.compression_method==0; + + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->compression_method = + s->cur_file_info.compression_method; + pfile_in_zip_read_info->file=s->file; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; + + pfile_in_zip_read_info->stream.total_out = 0; + + if (!Store) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidp)0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=1; + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; + + + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; + + pfile_in_zip_read_info->stream.avail_in = (uInt)0; + + + s->pfile_in_zip_read = pfile_in_zip_read_info; + return UNZ_OK; +} + + +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int unzReadCurrentFile (unzFile file, void *buf, unsigned len) +{ + int err=UNZ_OK; + uInt iRead = 0; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->read_buffer == NULL)) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; + + pfile_in_zip_read_info->stream.next_out = (Byte*)buf; + + pfile_in_zip_read_info->stream.avail_out = (uInt)len; + + if (len>pfile_in_zip_read_info->rest_read_uncompressed) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; + + while (pfile_in_zip_read_info->stream.avail_out>0) + { + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (s->cur_file_info.compressed_size == pfile_in_zip_read_info->rest_read_compressed) + if (fseek(pfile_in_zip_read_info->file, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) + return UNZ_ERRNO; + if (fread(pfile_in_zip_read_info->read_buffer,uReadThis,1, + pfile_in_zip_read_info->file)!=1) + return UNZ_ERRNO; + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; + + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; + + pfile_in_zip_read_info->stream.next_in = + (Byte*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if (pfile_in_zip_read_info->compression_method==0) + { + uInt uDoCopy,i ; + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;istream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, + pfile_in_zip_read_info->stream.next_out, + uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; + } + else + { + uLong uTotalOutBefore,uTotalOutAfter; + const Byte *bufBefore; + uLong uOutThis; + int flush=Z_SYNC_FLUSH; + + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; + + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); + + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->crc32 = + crc32(pfile_in_zip_read_info->crc32,bufBefore, + (uInt)(uOutThis)); + + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; +} + + +/* + Give the current position in uncompressed data +*/ +extern long unztell (unzFile file) +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + return (long)pfile_in_zip_read_info->stream.total_out; +} + + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int unzeof (unzFile file) +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} + + + +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the static-header version of the extra field (sometimes, there is + more info in the static-header version than in the central-header) + + if buf==NULL, it return the size of the static extra field that can be read + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int unzGetLocalExtrafield (unzFile file,void *buf,unsigned len) +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uInt read_now; + uLong size_to_read; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); + + if (buf==NULL) + return (int)size_to_read; + + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; + + if (read_now==0) + return 0; + + if (fseek(pfile_in_zip_read_info->file, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0) + return UNZ_ERRNO; + + if (fread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1) + return UNZ_ERRNO; + + return (int)read_now; +} + +/* + Close the file in zip opened with unzipOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int unzCloseCurrentFile (unzFile file) +{ + int err=UNZ_OK; + + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } + + + free(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised) + inflateEnd(&pfile_in_zip_read_info->stream); + + pfile_in_zip_read_info->stream_initialised = 0; + free(pfile_in_zip_read_info); + + s->pfile_in_zip_read=NULL; + + return err; +} + + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf) +{ + unz_s* s; + uLong uReadThis ; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; + + if (fseek(s->file,s->central_pos+22,SEEK_SET)!=0) + return UNZ_ERRNO; + + if (uReadThis>0) + { + *szComment='\0'; + if (fread(szComment,(uInt)uReadThis,1,s->file)!=1) + return UNZ_ERRNO; + } + + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; +} + +/* crc32.c -- compute the CRC-32 of a data stream + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id: unzip.cpp,v 1.1.1.3 2000/01/11 16:37:27 ttimo Exp $ */ + +#ifdef DYNAMIC_CRC_TABLE + +static int crc_table_empty = 1; +static uLong crc_table[256]; +static void make_crc_table OF((void)); + +/* + Generate a table for a byte-wise 32-bit CRC calculation on the polynomial: + x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. + + Polynomials over GF(2) are represented in binary, one bit per coefficient, + with the lowest powers in the most significant bit. Then adding polynomials + is just exclusive-or, and multiplying a polynomial by x is a right shift by + one. If we call the above polynomial p, and represent a byte as the + polynomial q, also with the lowest power in the most significant bit (so the + byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, + where a mod b means the remainder after dividing a by b. + + This calculation is done using the shift-register method of multiplying and + taking the remainder. The register is initialized to zero, and for each + incoming bit, x^32 is added mod p to the register if the bit is a one (where + x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by + x (which is shifting right by one and adding x^32 mod p if the bit shifted + out is a one). We start with the highest power (least significant bit) of + q and repeat for all eight bits of q. + + The table is simply the CRC of all possible eight bit values. This is all + the information needed to generate CRC's on data a byte at a time for all + combinations of CRC register values and incoming bytes. +*/ +static void make_crc_table() +{ + uLong c; + int n, k; + uLong poly; /* polynomial exclusive-or pattern */ + /* terms of polynomial defining this crc (except x^32): */ + static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* make exclusive-or pattern from polynomial (0xedb88320L) */ + poly = 0L; + for (n = 0; n < sizeof(p)/sizeof(Byte); n++) + poly |= 1L << (31 - p[n]); + + for (n = 0; n < 256; n++) + { + c = (uLong)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[n] = c; + } + crc_table_empty = 0; +} +#else +/* ======================================================================== + * Table of CRC-32's of all single-byte values (made by make_crc_table) + */ +static const uLong crc_table[256] = { + 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, + 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, + 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, + 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, + 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, + 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, + 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, + 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, + 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, + 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, + 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, + 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, + 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, + 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, + 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, + 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, + 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, + 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, + 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, + 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, + 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, + 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, + 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, + 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, + 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, + 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, + 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, + 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, + 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, + 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, + 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, + 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, + 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, + 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, + 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, + 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, + 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, + 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, + 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, + 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, + 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, + 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, + 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, + 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, + 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, + 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, + 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, + 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, + 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, + 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, + 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, + 0x2d02ef8dL +}; +#endif + +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +const uLong * get_crc_table() +{ +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) make_crc_table(); +#endif + return (const uLong *)crc_table; +} + +/* ========================================================================= */ +#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); +#define DO2(buf) DO1(buf); DO1(buf); +#define DO4(buf) DO2(buf); DO2(buf); +#define DO8(buf) DO4(buf); DO4(buf); + +/* ========================================================================= */ +uLong crc32(uLong crc, const Byte *buf, uInt len) +{ + if (buf == Z_NULL) return 0L; +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif + crc = crc ^ 0xffffffffL; + while (len >= 8) + { + DO8(buf); + len -= 8; + } + if (len) do { + DO1(buf); + } while (--len); + return crc ^ 0xffffffffL; +} + +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_blocks_state; +typedef struct inflate_blocks_state inflate_blocks_statef; + +extern inflate_blocks_statef * inflate_blocks_new OF(( + z_streamp z, + check_func c, /* check function */ + uInt w)); /* window size */ + +extern int inflate_blocks OF(( + inflate_blocks_statef *, + z_streamp , + int)); /* initial return code */ + +extern void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_streamp , + uLong *)); /* check value on output */ + +extern int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_streamp)); + +extern void inflate_set_dictionary OF(( + inflate_blocks_statef *s, + const Byte *d, /* dictionary */ + uInt n)); /* dictionary length */ + +extern int inflate_blocks_sync_point OF(( + inflate_blocks_statef *s)); + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* Table for deflate from PKZIP's appnote.txt. */ +static const uInt border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). */ + +typedef struct inflate_huft_s inflate_huft; + +struct inflate_huft_s { + union { + struct { + Byte Exop; /* number of extra bits or operation */ + Byte Bits; /* number of bits in this code or subcode */ + } what; + uInt pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit int's) */ + uInt base; /* literal, length base, distance base, + or table offset */ +}; + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1004 huft structures (850 for length/literals + and 154 for distances, the latter actually the result of an + exhaustive search). The actual maximum is not known, but the + value below is more than safe. */ +#define MANY 1440 + +extern int inflate_trees_bits OF(( + uInt *, /* 19 code lengths */ + uInt *, /* bits tree desired/actual depth */ + inflate_huft * *, /* bits tree result */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ + +extern int inflate_trees_dynamic OF(( + uInt, /* number of literal/length codes */ + uInt, /* number of distance codes */ + uInt *, /* that many (total) code lengths */ + uInt *, /* literal desired/actual bit depth */ + uInt *, /* distance desired/actual bit depth */ + inflate_huft * *, /* literal/length tree result */ + inflate_huft * *, /* distance tree result */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ + +extern int inflate_trees_fixed OF(( + uInt *, /* literal desired/actual bit depth */ + uInt *, /* distance desired/actual bit depth */ + inflate_huft * *, /* literal/length tree result */ + inflate_huft * *, /* distance tree result */ + z_streamp)); /* for memory allocation */ + + +/* infcodes.h -- header to use infcodes.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_codes_state; +typedef struct inflate_codes_state inflate_codes_statef; + +extern inflate_codes_statef *inflate_codes_new OF(( + uInt, uInt, + inflate_huft *, inflate_huft *, + z_streamp )); + +extern int inflate_codes OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +extern void inflate_codes_free OF(( + inflate_codes_statef *, + z_streamp )); + +/* infutil.h -- types and macros common to blocks and codes + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +#ifndef _INFUTIL_H +#define _INFUTIL_H + +typedef enum { + TYPE, /* get type bits (3, including end bit) */ + LENS, /* get lengths for stored */ + STORED, /* processing stored block */ + TABLE, /* get table lengths */ + BTREE, /* get bit lengths tree for a dynamic block */ + DTREE, /* get length, distance trees for a dynamic block */ + CODES, /* processing fixed or dynamic block */ + DRY, /* output remaining window bytes */ + DONE, /* finished last block, done */ + BAD} /* got a data error--stuck here */ +inflate_block_mode; + +/* inflate blocks semi-private state */ +struct inflate_blocks_state { + + /* mode */ + inflate_block_mode mode; /* current inflate_block mode */ + + /* mode dependent information */ + union { + uInt left; /* if STORED, bytes left to copy */ + struct { + uInt table; /* table lengths (14 bits) */ + uInt index; /* index into blens (or border) */ + uInt *blens; /* bit lengths of codes */ + uInt bb; /* bit length tree depth */ + inflate_huft *tb; /* bit length decoding tree */ + } trees; /* if DTREE, decoding info for trees */ + struct { + inflate_codes_statef + *codes; + } decode; /* if CODES, current state */ + } sub; /* submode */ + uInt last; /* true if this block is the last block */ + + /* mode independent information */ + uInt bitk; /* bits in bit buffer */ + uLong bitb; /* bit buffer */ + inflate_huft *hufts; /* single malloc for tree space */ + Byte *window; /* sliding window */ + Byte *end; /* one byte after sliding window */ + Byte *read; /* window read pointer */ + Byte *write; /* window write pointer */ + check_func checkfn; /* check function */ + uLong check; /* check on output */ + +}; + + +/* defines for inflate input/output */ +/* update pointers and return */ +#define UPDBITS {s->bitb=b;s->bitk=k;} +#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} +#define UPDOUT {s->write=q;} +#define UPDATE {UPDBITS UPDIN UPDOUT} +#define LEAVE {UPDATE return inflate_flush(s,z,r);} +/* get bytes and bits */ +#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} +#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} +#define NEXTBYTE (n--,*p++) +#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} +/* output bytes */ +#define WAVAIL (uInt)(qread?s->read-q-1:s->end-q) +#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} +#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} +#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} +#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} +#define OUTBYTE(a) {*q++=(Byte)(a);m--;} +/* load static pointers */ +#define LOAD {LOADIN LOADOUT} + +/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ +extern uInt inflate_mask[17]; + +/* copy as much as possible from the sliding window to the output area */ +extern int inflate_flush OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +#endif + + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarily, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + + +void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c) +{ + if (c != Z_NULL) + *c = s->check; + if (s->mode == BTREE || s->mode == DTREE) + ZFREE(z, s->sub.trees.blens); + if (s->mode == CODES) + inflate_codes_free(s->sub.decode.codes, z); + s->mode = TYPE; + s->bitk = 0; + s->bitb = 0; + s->read = s->write = s->window; + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0); + Tracev(("inflate: blocks reset\n")); +} + + +inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w) +{ + inflate_blocks_statef *s; + + if ((s = (inflate_blocks_statef *)ZALLOC + (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) + return s; + if ((s->hufts = + (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) + { + ZFREE(z, s); + return Z_NULL; + } + if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL) + { + ZFREE(z, s->hufts); + ZFREE(z, s); + return Z_NULL; + } + s->end = s->window + w; + s->checkfn = c; + s->mode = TYPE; + Tracev(("inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, Z_NULL); + return s; +} + + +int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r) +{ + uInt t; /* temporary storage */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input based on current state */ + while (1) switch (s->mode) + { + case TYPE: + NEEDBITS(3) + t = (uInt)b & 7; + s->last = t & 1; + switch (t >> 1) + { + case 0: /* stored */ + Tracev(("inflate: stored block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + t = k & 7; /* go to byte boundary */ + DUMPBITS(t) + s->mode = LENS; /* get length of stored block */ + break; + case 1: /* fixed */ + Tracev(("inflate: fixed codes block%s\n", + s->last ? " (last)" : "")); + { + uInt bl, bd; + inflate_huft *tl, *td; + + inflate_trees_fixed(&bl, &bd, &tl, &td, z); + s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); + if (s->sub.decode.codes == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + } + DUMPBITS(3) + s->mode = CODES; + break; + case 2: /* dynamic */ + Tracev(("inflate: dynamic codes block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + s->mode = TABLE; + break; + case 3: /* illegal */ + DUMPBITS(3) + s->mode = BAD; + z->msg = (char*)"invalid block type"; + r = Z_DATA_ERROR; + LEAVE + } + break; + case LENS: + NEEDBITS(32) + if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) + { + s->mode = BAD; + z->msg = (char*)"invalid stored block lengths"; + r = Z_DATA_ERROR; + LEAVE + } + s->sub.left = (uInt)b & 0xffff; + b = k = 0; /* dump bits */ + Tracev(("inflate: stored length %u\n", s->sub.left)); + s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); + break; + case STORED: + if (n == 0) + LEAVE + NEEDOUT + t = s->sub.left; + if (t > n) t = n; + if (t > m) t = m; + zmemcpy(q, p, t); + p += t; n -= t; + q += t; m -= t; + if ((s->sub.left -= t) != 0) + break; + Tracev(("inflate: stored end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + s->mode = s->last ? DRY : TYPE; + break; + case TABLE: + NEEDBITS(14) + s->sub.trees.table = t = (uInt)b & 0x3fff; +#ifndef PKZIP_BUG_WORKAROUND + if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) + { + s->mode = BAD; + z->msg = (char*)"too many length or distance symbols"; + r = Z_DATA_ERROR; + LEAVE + } +#endif + t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); + if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + DUMPBITS(14) + s->sub.trees.index = 0; + Tracev(("inflate: table sizes ok\n")); + s->mode = BTREE; + case BTREE: + while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) + { + NEEDBITS(3) + s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; + DUMPBITS(3) + } + while (s->sub.trees.index < 19) + s->sub.trees.blens[border[s->sub.trees.index++]] = 0; + s->sub.trees.bb = 7; + t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, + &s->sub.trees.tb, s->hufts, z); + if (t != Z_OK) + { + ZFREE(z, s->sub.trees.blens); + r = t; + if (r == Z_DATA_ERROR) + s->mode = BAD; + LEAVE + } + s->sub.trees.index = 0; + Tracev(("inflate: bits tree ok\n")); + s->mode = DTREE; + case DTREE: + while (t = s->sub.trees.table, + s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) + { + inflate_huft *h; + uInt i, j, c; + + t = s->sub.trees.bb; + NEEDBITS(t) + h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); + t = h->bits; + c = h->base; + if (c < 16) + { + DUMPBITS(t) + s->sub.trees.blens[s->sub.trees.index++] = c; + } + else /* c == 16..18 */ + { + i = c == 18 ? 7 : c - 14; + j = c == 18 ? 11 : 3; + NEEDBITS(t + i) + DUMPBITS(t) + j += (uInt)b & inflate_mask[i]; + DUMPBITS(i) + i = s->sub.trees.index; + t = s->sub.trees.table; + if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || + (c == 16 && i < 1)) + { + ZFREE(z, s->sub.trees.blens); + s->mode = BAD; + z->msg = (char*)"invalid bit length repeat"; + r = Z_DATA_ERROR; + LEAVE + } + c = c == 16 ? s->sub.trees.blens[i - 1] : 0; + do { + s->sub.trees.blens[i++] = c; + } while (--j); + s->sub.trees.index = i; + } + } + s->sub.trees.tb = Z_NULL; + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_codes_statef *c; + + bl = 9; /* must be <= 9 for lookahead assumptions */ + bd = 6; /* must be <= 9 for lookahead assumptions */ + t = s->sub.trees.table; + t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), + s->sub.trees.blens, &bl, &bd, &tl, &td, + s->hufts, z); + ZFREE(z, s->sub.trees.blens); + if (t != Z_OK) + { + if (t == (uInt)Z_DATA_ERROR) + s->mode = BAD; + r = t; + LEAVE + } + Tracev(("inflate: trees ok\n")); + if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.decode.codes = c; + } + s->mode = CODES; + case CODES: + UPDATE + if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) + return inflate_flush(s, z, r); + r = Z_OK; + inflate_codes_free(s->sub.decode.codes, z); + LOAD + Tracev(("inflate: codes end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + if (!s->last) + { + s->mode = TYPE; + break; + } + s->mode = DRY; + case DRY: + FLUSH + if (s->read != s->write) + LEAVE + s->mode = DONE; + case DONE: + r = Z_STREAM_END; + LEAVE + case BAD: + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z) +{ + inflate_blocks_reset(s, z, Z_NULL); + ZFREE(z, s->window); + ZFREE(z, s->hufts); + ZFREE(z, s); + Tracev(("inflate: blocks freed\n")); + return Z_OK; +} + + +void inflate_set_dictionary(inflate_blocks_statef *s, const Byte *d, uInt n) +{ + zmemcpy(s->window, d, n); + s->read = s->write = s->window + n; +} + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. + * IN assertion: s != Z_NULL + */ +int inflate_blocks_sync_point(inflate_blocks_statef *s) +{ + return s->mode == LENS; +} + + +/* And'ing with mask[n] masks the lower n bits */ +uInt inflate_mask[17] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + + +/* copy as much as possible from the sliding window to the output area */ +int inflate_flush(inflate_blocks_statef *s, z_streamp z, int r) +{ + uInt n; + Byte *p; + Byte *q; + + /* static copies of source and destination pointers */ + p = z->next_out; + q = s->read; + + /* compute number of bytes to copy as as end of window */ + n = (uInt)((q <= s->write ? s->write : s->end) - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy as as end of window */ + zmemcpy(p, q, n); + p += n; + q += n; + + /* see if more to copy at beginning of window */ + if (q == s->end) + { + /* wrap pointers */ + q = s->window; + if (s->write == s->end) + s->write = s->window; + + /* compute bytes to copy */ + n = (uInt)(s->write - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy */ + zmemcpy(p, q, n); + p += n; + q += n; + } + + /* update pointers */ + z->next_out = p; + s->read = q; + + /* done */ + return r; +} + +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +const char inflate_copyright[] = + " inflate 1.1.3 Copyright 1995-1998 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + + +static int huft_build OF(( + uInt *, /* code lengths in bits */ + uInt, /* number of codes */ + uInt, /* number of "simple" codes */ + const uInt *, /* list of base values for non-simple codes */ + const uInt *, /* list of extra bits for non-simple codes */ + inflate_huft **, /* result: starting table */ + uInt *, /* maximum lookup bits (returns actual) */ + inflate_huft *, /* space for trees */ + uInt *, /* hufts used in space */ + uInt * )); /* space for values */ + +/* Tables for deflate from PKZIP's appnote.txt. */ +static const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* see note #13 above about 258 */ +static const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ +static const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +static const uInt cpdext[30] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ +#define BMAX 15 /* maximum bit length of any code */ + +static int huft_build(uInt *b, uInt n, uInt s, const uInt *d, const uInt *e, inflate_huft ** t, uInt *m, inflate_huft *hp, uInt *hn, uInt *v) +//uInt *b; /* code lengths in bits (all assumed <= BMAX) */ +//uInt n; /* number of codes (assumed <= 288) */ +//uInt s; /* number of simple-valued codes (0..s-1) */ +//const uInt *d; /* list of base values for non-simple codes */ +//const uInt *e; /* list of extra bits for non-simple codes */ +//inflate_huft ** t; /* result: starting table */ +//uInt *m; /* maximum lookup bits, returns actual */ +//inflate_huft *hp; /* space for trees */ +//uInt *hn; /* hufts used in space */ +//uInt *v; /* working area: values in order of bit length */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR + if the given code set is incomplete (the tables are still built in this + case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of + lengths), or Z_MEM_ERROR if not enough memory. */ +{ + + uInt a; /* counter for codes of length k */ + uInt c[BMAX+1]; /* bit length count table */ + uInt f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register uInt i; /* counter, current code */ + register uInt j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */ + register uInt *p; /* pointer into c[], b[], or v[] */ + inflate_huft *q; /* points to current table */ + struct inflate_huft_s r; /* table entry for structure assignment */ + inflate_huft *u[BMAX]; /* table stack */ + register int w; /* bits before this table == (l * h) */ + uInt x[BMAX+1]; /* bit offsets, then code stack */ + uInt *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + uInt z; /* number of entries in current table */ + + + /* Generate counts for each bit length */ + p = c; +#define C0 *p++ = 0; +#define C2 C0 C0 C0 C0 +#define C4 C2 C2 C2 C2 + C4 /* clear c[]--assume BMAX+1 is 16 */ + p = b; i = n; + do { + c[*p++]++; /* assume all entries <= BMAX */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (inflate_huft *)Z_NULL; + *m = 0; + return Z_OK; + } + + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((uInt)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((uInt)l > i) + l = i; + *m = l; + + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return Z_DATA_ERROR; + if ((y -= c[i]) < 0) + return Z_DATA_ERROR; + c[i] += y; + + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + n = x[g]; /* set n to length of v */ + + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ + q = (inflate_huft *)Z_NULL; /* ditto */ + z = 0; /* ditto */ + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { + a = c[k]; + while (a--) + { + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = g - w; + z = z > (uInt)l ? l : z; /* table size upper limit */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + if (j < z) + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } + z = 1 << j; /* table entries for j-bit table */ + + /* allocate new table */ + if (*hn + z > MANY) /* (note: doesn't matter for fixed) */ + return Z_MEM_ERROR; /* not enough memory */ + u[h] = q = hp + *hn; + *hn += z; + + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.bits = (Byte)l; /* bits to dump before this table */ + r.exop = (Byte)j; /* bits in this table */ + j = i >> (w - l); + r.base = (uInt)(q - u[h-1] - j); /* offset to this table */ + u[h-1][j] = r; /* connect to last table */ + } + else + *t = q; /* first table is returned result */ + } + + /* set up table entry in r */ + r.bits = (Byte)(k - w); + if (p >= v + n) + r.exop = 128 + 64; /* out of values--invalid code */ + else if (*p < s) + { + r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ + r.base = *p++; /* simple code is just the value */ + } + else + { + r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ + r.base = d[*p++ - s]; + } + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + mask = (1 << w) - 1; /* needed on HP, cc -O bug */ + while ((i & mask) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + mask = (1 << w) - 1; + } + } + } + + + /* Return Z_BUF_ERROR if we were given an incomplete table */ + return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; +} + + +int inflate_trees_bits(uInt *c, uInt *bb, inflate_huft * *tb, inflate_huft *hp, z_streamp z) +//uInt *c; /* 19 code lengths */ +//uInt *bb; /* bits tree desired/actual depth */ +//inflate_huft * *tb; /* bits tree result */ +//inflate_huft *hp; /* space for trees */ +//z_streamp z; /* for messages */ +{ + int r; + uInt hn = 0; /* hufts used in space */ + uInt *v; /* work area for huft_build */ + + if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL, + tb, bb, hp, &hn, v); + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed dynamic bit lengths tree"; + else if (r == Z_BUF_ERROR || *bb == 0) + { + z->msg = (char*)"incomplete dynamic bit lengths tree"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; +} + + +int inflate_trees_dynamic(uInt nl, uInt nd, uInt *c, uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, inflate_huft *hp, z_streamp z) +//uInt nl; /* number of literal/length codes */ +//uInt nd; /* number of distance codes */ +//uInt *c; /* that many (total) code lengths */ +//uInt *bl; /* literal desired/actual bit depth */ +//uInt *bd; /* distance desired/actual bit depth */ +//inflate_huft * *tl; /* literal/length tree result */ +//inflate_huft * *td; /* distance tree result */ +//inflate_huft *hp; /* space for trees */ +//z_streamp z; /* for messages */ +{ + int r; + uInt hn = 0; /* hufts used in space */ + uInt *v; /* work area for huft_build */ + + /* allocate work area */ + if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + + /* build literal/length tree */ + r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); + if (r != Z_OK || *bl == 0) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed literal/length tree"; + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; + } + + /* build distance tree */ + r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); + if (r != Z_OK || (*bd == 0 && nl > 257)) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed distance tree"; + else if (r == Z_BUF_ERROR) { +#ifdef PKZIP_BUG_WORKAROUND + r = Z_OK; + } +#else + z->msg = (char*)"incomplete distance tree"; + r = Z_DATA_ERROR; + } + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"empty distance tree with lengths"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; +#endif + } + + /* done */ + ZFREE(z, v); + return Z_OK; +} + +/* inffixed.h -- table for decoding fixed codes + * Generated automatically by the maketree.c program + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +static uInt fixed_bl = 9; +static uInt fixed_bd = 5; +static inflate_huft fixed_tl[] = { + {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, + {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192}, + {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160}, + {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224}, + {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144}, + {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208}, + {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176}, + {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240}, + {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, + {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200}, + {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168}, + {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232}, + {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152}, + {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216}, + {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184}, + {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248}, + {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, + {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196}, + {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164}, + {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228}, + {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148}, + {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212}, + {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180}, + {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244}, + {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204}, + {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172}, + {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236}, + {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156}, + {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220}, + {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188}, + {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252}, + {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, + {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194}, + {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162}, + {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226}, + {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146}, + {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210}, + {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178}, + {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242}, + {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, + {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202}, + {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170}, + {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234}, + {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154}, + {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218}, + {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186}, + {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250}, + {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, + {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198}, + {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166}, + {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230}, + {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150}, + {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214}, + {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182}, + {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246}, + {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206}, + {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174}, + {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238}, + {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158}, + {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222}, + {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190}, + {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254}, + {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, + {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193}, + {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161}, + {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225}, + {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145}, + {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209}, + {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177}, + {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241}, + {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, + {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201}, + {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169}, + {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233}, + {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153}, + {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217}, + {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185}, + {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249}, + {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, + {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197}, + {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165}, + {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229}, + {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149}, + {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213}, + {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181}, + {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245}, + {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205}, + {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173}, + {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237}, + {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157}, + {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221}, + {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189}, + {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253}, + {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, + {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195}, + {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163}, + {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227}, + {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147}, + {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211}, + {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179}, + {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243}, + {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, + {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203}, + {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171}, + {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235}, + {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155}, + {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219}, + {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187}, + {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251}, + {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, + {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199}, + {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167}, + {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231}, + {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151}, + {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215}, + {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183}, + {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247}, + {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207}, + {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175}, + {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239}, + {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159}, + {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223}, + {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191}, + {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255} + }; +static inflate_huft fixed_td[] = { + {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097}, + {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385}, + {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193}, + {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577}, + {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145}, + {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577}, + {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289}, + {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577} + }; + +int inflate_trees_fixed(uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, z_streamp z) +//uInt *bl; /* literal desired/actual bit depth */ +//uInt *bd; /* distance desired/actual bit depth */ +//inflate_huft * *tl; /* literal/length tree result */ +//inflate_huft * *td; /* distance tree result */ +//z_streamp z; /* for memory allocation */ +{ + *bl = fixed_bl; + *bd = fixed_bd; + *tl = fixed_tl; + *td = fixed_td; + return Z_OK; +} + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* macros for bit input with no checking and for returning unused bytes */ +#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<avail_in-n;c=(k>>3)>3:c;n+=c;p-=c;k-=c<<3;} + +/* Called with number of bytes left to write in window at least 258 + (the maximum string length) and number of input bytes available + at least ten. The ten bytes are six bytes for the longest length/ + distance pair plus four bytes for overloading the bit buffer. */ + +int inflate_fast(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, inflate_blocks_statef *s, z_streamp z) +{ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + uInt ml; /* mask for literal/length tree */ + uInt md; /* mask for distance tree */ + uInt c; /* bytes to copy */ + uInt d; /* distance back to copy from */ + Byte *r; /* copy source pointer */ + + /* load input, output, bit values */ + LOAD + + /* initialize masks */ + ml = inflate_mask[bl]; + md = inflate_mask[bd]; + + /* do until not enough input or output space for fast loop */ + do { /* assume called with m >= 258 && n >= 10 */ + /* get literal/length code */ + GRABBITS(20) /* max bits for literal/length code */ + if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + continue; + } + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits for length */ + e &= 15; + c = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv(("inflate: * length %u\n", c)); + + /* decode distance base of block to copy */ + GRABBITS(15); /* max bits for distance code */ + e = (t = td + ((uInt)b & md))->exop; + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits to add to distance base */ + e &= 15; + GRABBITS(e) /* get extra bits (up to 13) */ + d = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv(("inflate: * distance %u\n", d)); + + /* do the copy */ + m -= c; + if ((uInt)(q - s->window) >= d) /* offset before dest */ + { /* just copy */ + r = q - d; + *q++ = *r++; c--; /* minimum count is three, */ + *q++ = *r++; c--; /* so unroll loop a little */ + } + else /* else offset after destination */ + { + e = d - (uInt)(q - s->window); /* bytes from offset to end */ + r = s->end - e; /* pointer to offset */ + if (c > e) /* if source crosses, */ + { + c -= e; /* copy to end of window */ + do { + *q++ = *r++; + } while (--e); + r = s->window; /* copy rest from start of window */ + } + } + do { /* copy all or what's left */ + *q++ = *r++; + } while (--c); + break; + } + else if ((e & 64) == 0) + { + t += t->base; + e = (t += ((uInt)b & inflate_mask[e]))->exop; + } + else + { + z->msg = (char*)"invalid distance code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + break; + } + if ((e & 64) == 0) + { + t += t->base; + if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + break; + } + } + else if (e & 32) + { + Tracevv(("inflate: * end of block\n")); + UNGRAB + UPDATE + return Z_STREAM_END; + } + else + { + z->msg = (char*)"invalid literal/length code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + } while (m >= 258 && n >= 10); + + /* not enough input or output--restore pointers and return */ + UNGRAB + UPDATE + return Z_OK; +} + +/* infcodes.c -- process literals and length/distance pairs + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + START, /* x: set up for LEN */ + LEN, /* i: get length/literal/eob next */ + LENEXT, /* i: getting length extra (have base) */ + DIST, /* i: get distance next */ + DISTEXT, /* i: getting distance extra */ + COPY, /* o: copying bytes in window, waiting for space */ + LIT, /* o: got literal, waiting for output space */ + WASH, /* o: got eob, possibly still output waiting */ + END, /* x: got eob and all data flushed */ + BADCODE} /* x: got error */ +inflate_codes_mode; + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + inflate_codes_mode mode; /* current inflate_codes mode */ + + /* mode dependent information */ + uInt len; + union { + struct { + inflate_huft *tree; /* pointer into tree */ + uInt need; /* bits needed */ + } code; /* if LEN or DIST, where in tree */ + uInt lit; /* if LIT, literal */ + struct { + uInt get; /* bits to get for extra */ + uInt dist; /* distance back to copy from */ + } copy; /* if EXT or COPY, where and how much */ + } sub; /* submode */ + + /* mode independent information */ + Byte lbits; /* ltree bits decoded per branch */ + Byte dbits; /* dtree bits decoder per branch */ + inflate_huft *ltree; /* literal/length/eob tree */ + inflate_huft *dtree; /* distance tree */ + +}; + + +inflate_codes_statef *inflate_codes_new(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, z_streamp z) +{ + inflate_codes_statef *c; + + if ((c = (inflate_codes_statef *) + ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) + { + c->mode = START; + c->lbits = (Byte)bl; + c->dbits = (Byte)bd; + c->ltree = tl; + c->dtree = td; + Tracev(("inflate: codes new\n")); + } + return c; +} + + +int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r) +{ + uInt j; /* temporary storage */ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + Byte *f; /* pointer to copy strings from */ + inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input and output based on current state */ + while (1) switch (c->mode) + { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + case START: /* x: set up for LEN */ +#ifndef SLOW + if (m >= 258 && n >= 10) + { + UPDATE + r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); + LOAD + if (r != Z_OK) + { + c->mode = r == Z_STREAM_END ? WASH : BADCODE; + break; + } + } +#endif /* !SLOW */ + c->sub.code.need = c->lbits; + c->sub.code.tree = c->ltree; + c->mode = LEN; + case LEN: /* i: get length/literal/eob next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e == 0) /* literal */ + { + c->sub.lit = t->base; + Tracevv((t->base >= 0x20 && t->base < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", t->base)); + c->mode = LIT; + break; + } + if (e & 16) /* length */ + { + c->sub.copy.get = e & 15; + c->len = t->base; + c->mode = LENEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t + t->base; + break; + } + if (e & 32) /* end of block */ + { + Tracevv(("inflate: end of block\n")); + c->mode = WASH; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid literal/length code"; + r = Z_DATA_ERROR; + LEAVE + case LENEXT: /* i: getting length extra (have base) */ + j = c->sub.copy.get; + NEEDBITS(j) + c->len += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + c->sub.code.need = c->dbits; + c->sub.code.tree = c->dtree; + Tracevv(("inflate: length %u\n", c->len)); + c->mode = DIST; + case DIST: /* i: get distance next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e & 16) /* distance */ + { + c->sub.copy.get = e & 15; + c->sub.copy.dist = t->base; + c->mode = DISTEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t + t->base; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid distance code"; + r = Z_DATA_ERROR; + LEAVE + case DISTEXT: /* i: getting distance extra */ + j = c->sub.copy.get; + NEEDBITS(j) + c->sub.copy.dist += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + Tracevv(("inflate: distance %u\n", c->sub.copy.dist)); + c->mode = COPY; + case COPY: /* o: copying bytes in window, waiting for space */ +#ifndef __TURBOC__ /* Turbo C bug for following expression */ + f = (uInt)(q - s->window) < c->sub.copy.dist ? + s->end - (c->sub.copy.dist - (q - s->window)) : + q - c->sub.copy.dist; +#else + f = q - c->sub.copy.dist; + if ((uInt)(q - s->window) < c->sub.copy.dist) + f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); +#endif + while (c->len) + { + NEEDOUT + OUTBYTE(*f++) + if (f == s->end) + f = s->window; + c->len--; + } + c->mode = START; + break; + case LIT: /* o: got literal, waiting for output space */ + NEEDOUT + OUTBYTE(c->sub.lit) + c->mode = START; + break; + case WASH: /* o: got eob, possibly more output */ + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } + FLUSH + if (s->read != s->write) + LEAVE + c->mode = END; + case END: + r = Z_STREAM_END; + LEAVE + case BADCODE: /* x: got error */ + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif +} + + +void inflate_codes_free(inflate_codes_statef *c, z_streamp z) +{ + ZFREE(z, c); + Tracev(("inflate: codes free\n")); +} + +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#define BASE 65521L /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#undef DO1 +#undef DO2 +#undef DO4 +#undef DO8 + +#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* ========================================================================= */ +uLong adler32(uLong adler, const Byte *buf, uInt len) +{ + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int k; + + if (buf == Z_NULL) return 1L; + + while (len > 0) { + k = len < NMAX ? len : NMAX; + len -= k; + while (k >= 16) { + DO16(buf); + buf += 16; + k -= 16; + } + if (k != 0) do { + s1 += *buf++; + s2 += s1; + } while (--k); + s1 %= BASE; + s2 %= BASE; + } + return (s2 << 16) | s1; +} + +/* @(#) $Id: unzip.cpp,v 1.1.1.3 2000/01/11 16:37:27 ttimo Exp $ */ + +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +extern inflate_blocks_statef * inflate_blocks_new OF(( + z_streamp z, + check_func c, /* check function */ + uInt w)); /* window size */ + +extern int inflate_blocks OF(( + inflate_blocks_statef *, + z_streamp , + int)); /* initial return code */ + +extern void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_streamp , + uLong *)); /* check value on output */ + +extern int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_streamp)); + +extern void inflate_set_dictionary OF(( + inflate_blocks_statef *s, + const Byte *d, /* dictionary */ + uInt n)); /* dictionary length */ + +extern int inflate_blocks_sync_point OF(( + inflate_blocks_statef *s)); + +typedef enum { + imMETHOD, /* waiting for method byte */ + imFLAG, /* waiting for flag byte */ + imDICT4, /* four dictionary check bytes to go */ + imDICT3, /* three dictionary check bytes to go */ + imDICT2, /* two dictionary check bytes to go */ + imDICT1, /* one dictionary check byte to go */ + imDICT0, /* waiting for inflateSetDictionary */ + imBLOCKS, /* decompressing blocks */ + imCHECK4, /* four check bytes to go */ + imCHECK3, /* three check bytes to go */ + imCHECK2, /* two check bytes to go */ + imCHECK1, /* one check byte to go */ + imDONE, /* finished check, done */ + imBAD} /* got an error--stay here */ +inflate_mode; + +/* inflate private state */ +struct internal_state { + + /* mode */ + inflate_mode mode; /* current inflate mode */ + + /* mode dependent information */ + union { + uInt method; /* if FLAGS, method byte */ + struct { + uLong was; /* computed check value */ + uLong need; /* stream check value */ + } check; /* if CHECK, check values to compare */ + uInt marker; /* if BAD, inflateSync's marker bytes count */ + } sub; /* submode */ + + /* mode independent information */ + int nowrap; /* flag for no wrapper */ + uInt wbits; /* log2(window size) (8..15, defaults to 15) */ + inflate_blocks_statef + *blocks; /* current inflate_blocks state */ + +}; + + +int inflateReset(z_streamp z) +{ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + z->total_in = z->total_out = 0; + z->msg = Z_NULL; + z->state->mode = z->state->nowrap ? imBLOCKS : imMETHOD; + inflate_blocks_reset(z->state->blocks, z, Z_NULL); + Tracev(("inflate: reset\n")); + return Z_OK; +} + + +int inflateEnd(z_streamp z) +{ + if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->blocks != Z_NULL) + inflate_blocks_free(z->state->blocks, z); + ZFREE(z, z->state); + z->state = Z_NULL; + Tracev(("inflate: end\n")); + return Z_OK; +} + + + +int inflateInit2_(z_streamp z, int w, const char *version, int stream_size) +{ + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != sizeof(z_stream)) + return Z_VERSION_ERROR; + + /* initialize state */ + if (z == Z_NULL) + return Z_STREAM_ERROR; + z->msg = Z_NULL; + if (z->zalloc == Z_NULL) + { + z->zalloc = (void *(*)(void *, unsigned, unsigned))zcalloc; + z->opaque = (voidp)0; + } + if (z->zfree == Z_NULL) z->zfree = (void (*)(void *, void *))zcfree; + if ((z->state = (struct internal_state *) + ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) + return Z_MEM_ERROR; + z->state->blocks = Z_NULL; + + /* handle undocumented nowrap option (no zlib header or check) */ + z->state->nowrap = 0; + if (w < 0) + { + w = - w; + z->state->nowrap = 1; + } + + /* set window size */ + if (w < 8 || w > 15) + { + inflateEnd(z); + return Z_STREAM_ERROR; + } + z->state->wbits = (uInt)w; + + /* create inflate_blocks state */ + if ((z->state->blocks = + inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) + == Z_NULL) + { + inflateEnd(z); + return Z_MEM_ERROR; + } + Tracev(("inflate: allocated\n")); + + /* reset state */ + inflateReset(z); + return Z_OK; +} + + +int inflateInit_(z_streamp z, const char *version, int stream_size) +{ + return inflateInit2_(z, DEF_WBITS, version, stream_size); +} + + +#define iNEEDBYTE {if(z->avail_in==0)return r;r=f;} +#define iNEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + +int inflate(z_streamp z, int f) +{ + int r; + uInt b; + + if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) + return Z_STREAM_ERROR; + f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; + r = Z_BUF_ERROR; + while (1) switch (z->state->mode) + { + case imMETHOD: + iNEEDBYTE + if (((z->state->sub.method = iNEXTBYTE) & 0xf) != Z_DEFLATED) + { + z->state->mode = imBAD; + z->msg = (char*)"unknown compression method"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if ((z->state->sub.method >> 4) + 8 > z->state->wbits) + { + z->state->mode = imBAD; + z->msg = (char*)"invalid window size"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + z->state->mode = imFLAG; + case imFLAG: + iNEEDBYTE + b = iNEXTBYTE; + if (((z->state->sub.method << 8) + b) % 31) + { + z->state->mode = imBAD; + z->msg = (char*)"incorrect header check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Tracev(("inflate: zlib header ok\n")); + if (!(b & PRESET_DICT)) + { + z->state->mode = imBLOCKS; + break; + } + z->state->mode = imDICT4; + case imDICT4: + iNEEDBYTE + z->state->sub.check.need = (uLong)iNEXTBYTE << 24; + z->state->mode = imDICT3; + case imDICT3: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 16; + z->state->mode = imDICT2; + case imDICT2: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 8; + z->state->mode = imDICT1; + case imDICT1: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE; + z->adler = z->state->sub.check.need; + z->state->mode = imDICT0; + return Z_NEED_DICT; + case imDICT0: + z->state->mode = imBAD; + z->msg = (char*)"need dictionary"; + z->state->sub.marker = 0; /* can try inflateSync */ + return Z_STREAM_ERROR; + case imBLOCKS: + r = inflate_blocks(z->state->blocks, z, r); + if (r == Z_DATA_ERROR) + { + z->state->mode = imBAD; + z->state->sub.marker = 0; /* can try inflateSync */ + break; + } + if (r == Z_OK) + r = f; + if (r != Z_STREAM_END) + return r; + r = f; + inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); + if (z->state->nowrap) + { + z->state->mode = imDONE; + break; + } + z->state->mode = imCHECK4; + case imCHECK4: + iNEEDBYTE + z->state->sub.check.need = (uLong)iNEXTBYTE << 24; + z->state->mode = imCHECK3; + case imCHECK3: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 16; + z->state->mode = imCHECK2; + case imCHECK2: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 8; + z->state->mode = imCHECK1; + case imCHECK1: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE; + + if (z->state->sub.check.was != z->state->sub.check.need) + { + z->state->mode = imBAD; + z->msg = (char*)"incorrect data check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Tracev(("inflate: zlib check ok\n")); + z->state->mode = imDONE; + case imDONE: + return Z_STREAM_END; + case imBAD: + return Z_DATA_ERROR; + default: + return Z_STREAM_ERROR; + } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif +} + + +int inflateSetDictionary(z_streamp z, const Byte *dictionary, uInt dictLength) +{ + uInt length = dictLength; + + if (z == Z_NULL || z->state == Z_NULL || z->state->mode != imDICT0) + return Z_STREAM_ERROR; + + if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; + z->adler = 1L; + + if (length >= ((uInt)1<state->wbits)) + { + length = (1<state->wbits)-1; + dictionary += dictLength - length; + } + inflate_set_dictionary(z->state->blocks, dictionary, length); + z->state->mode = imBLOCKS; + return Z_OK; +} + + +int inflateSync(z_streamp z) +{ + uInt n; /* number of bytes to look at */ + Byte *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->mode != imBAD) + { + z->state->mode = imBAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + static const Byte mark[4] = {0, 0, 0xff, 0xff}; + if (*p == mark[m]) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = imBLOCKS; + return Z_OK; +} + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH + * but removes the length bytes of the resulting empty stored block. When + * decompressing, PPP checks that at the end of input packet, inflate is + * waiting for these length bytes. + */ +int inflateSyncPoint(z_streamp z) +{ + if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL) + return Z_STREAM_ERROR; + return inflate_blocks_sync_point(z->state->blocks); +} + +voidp zcalloc (voidp opaque, unsigned items, unsigned size) +{ + if (opaque) items += size - size; /* make compiler happy */ + return (voidp)malloc(items*size); +} + +void zcfree (voidp opaque, voidp ptr) +{ + free(ptr); + if (opaque) return; /* make compiler happy */ +} + diff --git a/libs/pak/unzip.h b/libs/pak/unzip.h index d5c165d..79a487e 100755 --- a/libs/pak/unzip.h +++ b/libs/pak/unzip.h @@ -1,300 +1,300 @@ - -#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP) -/* like the STRICT of WIN32, we define a pointer that cannot be converted - from (void*) without cast */ -typedef struct TagunzFile__ { int unused; } unzFile__; -typedef unzFile__ *unzFile; -#else -typedef void* unzFile; -#endif - - -/* tm_unz contain date/time info */ -typedef struct tm_unz_s -{ - unsigned int tm_sec; /* seconds after the minute - [0,59] */ - unsigned int tm_min; /* minutes after the hour - [0,59] */ - unsigned int tm_hour; /* hours since midnight - [0,23] */ - unsigned int tm_mday; /* day of the month - [1,31] */ - unsigned int tm_mon; /* months since January - [0,11] */ - unsigned int tm_year; /* years - [1980..2044] */ -} tm_unz; - -/* unz_global_info structure contain global data about the ZIPfile - These data comes from the end of central dir */ -typedef struct unz_global_info_s -{ - unsigned long number_entry; /* total number of entries in the central dir on this disk */ - unsigned long size_comment; /* size of the global comment of the zipfile */ -} unz_global_info; - - -/* unz_file_info contain information about a file in the zipfile */ -typedef struct unz_file_info_s -{ - unsigned long version; /* version made by 2 unsigned chars */ - unsigned long version_needed; /* version needed to extract 2 unsigned chars */ - unsigned long flag; /* general purpose bit flag 2 unsigned chars */ - unsigned long compression_method; /* compression method 2 unsigned chars */ - unsigned long dosDate; /* last mod file date in Dos fmt 4 unsigned chars */ - unsigned long crc; /* crc-32 4 unsigned chars */ - unsigned long compressed_size; /* compressed size 4 unsigned chars */ - unsigned long uncompressed_size; /* uncompressed size 4 unsigned chars */ - unsigned long size_filename; /* filename length 2 unsigned chars */ - unsigned long size_file_extra; /* extra field length 2 unsigned chars */ - unsigned long size_file_comment; /* file comment length 2 unsigned chars */ - - unsigned long disk_num_start; /* disk number start 2 unsigned chars */ - unsigned long internal_fa; /* internal file attributes 2 unsigned chars */ - unsigned long external_fa; /* external file attributes 4 unsigned chars */ - - tm_unz tmu_date; -} unz_file_info; - -/* unz_file_info_interntal contain internal info about a file in zipfile*/ -typedef struct unz_file_info_internal_s -{ - unsigned long offset_curfile;/* relative offset of static header 4 unsigned chars */ -} unz_file_info_internal; - -typedef void* (*alloc_func) (void* opaque, unsigned int items, unsigned int size); -typedef void (*free_func) (void* opaque, void* address); - -struct internal_state; - -typedef struct z_stream_s { - unsigned char *next_in; /* next input unsigned char */ - unsigned int avail_in; /* number of unsigned chars available at next_in */ - unsigned long total_in; /* total nb of input unsigned chars read so */ - - unsigned char *next_out; /* next output unsigned char should be put there */ - unsigned int avail_out; /* remaining free space at next_out */ - unsigned long total_out; /* total nb of unsigned chars output so */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - unsigned char* opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: ascii or binary */ - unsigned long adler; /* adler32 value of the uncompressed data */ - unsigned long reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream *z_streamp; - - -/* file_in_zip_read_info_s contain internal information about a file in zipfile, - when reading and decompress it */ -typedef struct -{ - char *read_buffer; /* internal buffer for compressed data */ - z_stream stream; /* zLib stream structure for inflate */ - - unsigned long pos_in_zipfile; /* position in unsigned char on the zipfile, for fseek*/ - unsigned long stream_initialised; /* flag set if stream structure is initialised*/ - - unsigned long offset_local_extrafield;/* offset of the static extra field */ - unsigned int size_local_extrafield;/* size of the static extra field */ - unsigned long pos_local_extrafield; /* position in the static extra field in read*/ - - unsigned long crc32; /* crc32 of all data uncompressed */ - unsigned long crc32_wait; /* crc32 we must obtain after decompress all */ - unsigned long rest_read_compressed; /* number of unsigned char to be decompressed */ - unsigned long rest_read_uncompressed;/*number of unsigned char to be obtained after decomp*/ - FILE* file; /* io structore of the zipfile */ - unsigned long compression_method; /* compression method (0==store) */ - unsigned long byte_before_the_zipfile;/* unsigned char before the zipfile, (>0 for sfx)*/ -} file_in_zip_read_info_s; - - -/* unz_s contain internal information about the zipfile -*/ -typedef struct -{ - FILE* file; /* io structore of the zipfile */ - unz_global_info gi; /* public global information */ - unsigned long byte_before_the_zipfile;/* unsigned char before the zipfile, (>0 for sfx)*/ - unsigned long num_file; /* number of the current file in the zipfile*/ - unsigned long pos_in_central_dir; /* pos of the current file in the central dir*/ - unsigned long current_file_ok; /* flag about the usability of the current file*/ - unsigned long central_pos; /* position of the beginning of the central dir*/ - - unsigned long size_central_dir; /* size of the central directory */ - unsigned long offset_central_dir; /* offset of start of central directory with - respect to the starting disk number */ - - unz_file_info cur_file_info; /* public info about the current file in zip*/ - unz_file_info_internal cur_file_info_internal; /* private info about it*/ - file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current - file if we are decompressing it */ -} unz_s; - -#define UNZ_OK (0) -#define UNZ_END_OF_LIST_OF_FILE (-100) -#define UNZ_ERRNO (Z_ERRNO) -#define UNZ_EOF (0) -#define UNZ_PARAMERROR (-102) -#define UNZ_BADZIPFILE (-103) -#define UNZ_INTERNALERROR (-104) -#define UNZ_CRCERROR (-105) - -#define UNZ_CASESENSITIVE 1 -#define UNZ_NOTCASESENSITIVE 2 -#define UNZ_OSDEFAULTCASE 0 - -extern int unzStringFileNameCompare (const char* fileName1, const char* fileName2, int iCaseSensitivity); - -/* - Compare two filename (fileName1,fileName2). - If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) - If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi - or strcasecmp) - If iCaseSenisivity = 0, case sensitivity is defaut of your operating system - (like 1 on Unix, 2 on Windows) -*/ - -extern unzFile unzOpen (const char *path); -extern unzFile unzReOpen (const char* path, unzFile file); - -/* - Open a Zip file. path contain the full pathname (by example, - on a Windows NT computer "c:\\zlib\\zlib111.zip" or on an Unix computer - "zlib/zlib111.zip". - If the zipfile cannot be opened (file don't exist or in not valid), the - return value is NULL. - Else, the return value is a unzFile Handle, usable with other function - of this unzip package. -*/ - -extern int unzClose (unzFile file); - -/* - Close a ZipFile opened with unzipOpen. - If there is files inside the .Zip opened with unzOpenCurrentFile (see later), - these files MUST be closed with unzipCloseCurrentFile before call unzipClose. - return UNZ_OK if there is no problem. */ - -extern int unzGetGlobalInfo (unzFile file, unz_global_info *pglobal_info); - -/* - Write info about the ZipFile in the *pglobal_info structure. - No preparation of the structure is needed - return UNZ_OK if there is no problem. */ - - -extern int unzGetGlobalComment (unzFile file, char *szComment, unsigned long uSizeBuf); - -/* - Get the global comment string of the ZipFile, in the szComment buffer. - uSizeBuf is the size of the szComment buffer. - return the number of unsigned char copied or an error code <0 -*/ - - -/***************************************************************************/ -/* Unzip package allow you browse the directory of the zipfile */ - -extern int unzGoToFirstFile (unzFile file); - -/* - Set the current file of the zipfile to the first file. - return UNZ_OK if there is no problem -*/ - -extern int unzGoToNextFile (unzFile file); - -/* - Set the current file of the zipfile to the next file. - return UNZ_OK if there is no problem - return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. -*/ - -extern int unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity); - -/* - Try locate the file szFileName in the zipfile. - For the iCaseSensitivity signification, see unzStringFileNameCompare - - return value : - UNZ_OK if the file is found. It becomes the current file. - UNZ_END_OF_LIST_OF_FILE if the file is not found -*/ - - -extern int unzGetCurrentFileInfo (unzFile file, unz_file_info *pfile_info, char *szFileName, unsigned long fileNameBufferSize, void *extraField, unsigned long extraFieldBufferSize, char *szComment, unsigned long commentBufferSize); - -/* - Get Info about the current file - if pfile_info!=NULL, the *pfile_info structure will contain somes info about - the current file - if szFileName!=NULL, the filemane string will be copied in szFileName - (fileNameBufferSize is the size of the buffer) - if extraField!=NULL, the extra field information will be copied in extraField - (extraFieldBufferSize is the size of the buffer). - This is the Central-header version of the extra field - if szComment!=NULL, the comment string of the file will be copied in szComment - (commentBufferSize is the size of the buffer) -*/ - -/***************************************************************************/ -/* for reading the content of the current zipfile, you can open it, read data - from it, and close it (you can close it before reading all the file) - */ - -extern int unzOpenCurrentFile (unzFile file); - -/* - Open for reading data the current file in the zipfile. - If there is no error, the return value is UNZ_OK. -*/ - -extern int unzCloseCurrentFile (unzFile file); - -/* - Close the file in zip opened with unzOpenCurrentFile - Return UNZ_CRCERROR if all the file was read but the CRC is not good -*/ - - -extern int unzReadCurrentFile (unzFile file, void* buf, unsigned len); - -/* - Read unsigned chars from the current file (opened by unzOpenCurrentFile) - buf contain buffer where data must be copied - len the size of buf. - - return the number of unsigned char copied if somes unsigned chars are copied - return 0 if the end of file was reached - return <0 with error code if there is an error - (UNZ_ERRNO for IO error, or zLib error for uncompress error) -*/ - -extern long unztell(unzFile file); - -/* - Give the current position in uncompressed data -*/ - -extern int unzeof (unzFile file); - -/* - return 1 if the end of file was reached, 0 elsewhere -*/ - -extern int unzGetLocalExtrafield (unzFile file, void* buf, unsigned len); - -/* - Read extra field from the current file (opened by unzOpenCurrentFile) - This is the local-header version of the extra field (sometimes, there is - more info in the local-header version than in the central-header) - - if buf==NULL, it return the size of the local extra field - - if buf!=NULL, len is the size of the buffer, the extra header is copied in - buf. - the return value is the number of unsigned chars copied in buf, or (if <0) - the error code -*/ + +#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagunzFile__ { int unused; } unzFile__; +typedef unzFile__ *unzFile; +#else +typedef void* unzFile; +#endif + + +/* tm_unz contain date/time info */ +typedef struct tm_unz_s +{ + unsigned int tm_sec; /* seconds after the minute - [0,59] */ + unsigned int tm_min; /* minutes after the hour - [0,59] */ + unsigned int tm_hour; /* hours since midnight - [0,23] */ + unsigned int tm_mday; /* day of the month - [1,31] */ + unsigned int tm_mon; /* months since January - [0,11] */ + unsigned int tm_year; /* years - [1980..2044] */ +} tm_unz; + +/* unz_global_info structure contain global data about the ZIPfile + These data comes from the end of central dir */ +typedef struct unz_global_info_s +{ + unsigned long number_entry; /* total number of entries in the central dir on this disk */ + unsigned long size_comment; /* size of the global comment of the zipfile */ +} unz_global_info; + + +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_info_s +{ + unsigned long version; /* version made by 2 unsigned chars */ + unsigned long version_needed; /* version needed to extract 2 unsigned chars */ + unsigned long flag; /* general purpose bit flag 2 unsigned chars */ + unsigned long compression_method; /* compression method 2 unsigned chars */ + unsigned long dosDate; /* last mod file date in Dos fmt 4 unsigned chars */ + unsigned long crc; /* crc-32 4 unsigned chars */ + unsigned long compressed_size; /* compressed size 4 unsigned chars */ + unsigned long uncompressed_size; /* uncompressed size 4 unsigned chars */ + unsigned long size_filename; /* filename length 2 unsigned chars */ + unsigned long size_file_extra; /* extra field length 2 unsigned chars */ + unsigned long size_file_comment; /* file comment length 2 unsigned chars */ + + unsigned long disk_num_start; /* disk number start 2 unsigned chars */ + unsigned long internal_fa; /* internal file attributes 2 unsigned chars */ + unsigned long external_fa; /* external file attributes 4 unsigned chars */ + + tm_unz tmu_date; +} unz_file_info; + +/* unz_file_info_interntal contain internal info about a file in zipfile*/ +typedef struct unz_file_info_internal_s +{ + unsigned long offset_curfile;/* relative offset of static header 4 unsigned chars */ +} unz_file_info_internal; + +typedef void* (*alloc_func) (void* opaque, unsigned int items, unsigned int size); +typedef void (*free_func) (void* opaque, void* address); + +struct internal_state; + +typedef struct z_stream_s { + unsigned char *next_in; /* next input unsigned char */ + unsigned int avail_in; /* number of unsigned chars available at next_in */ + unsigned long total_in; /* total nb of input unsigned chars read so */ + + unsigned char *next_out; /* next output unsigned char should be put there */ + unsigned int avail_out; /* remaining free space at next_out */ + unsigned long total_out; /* total nb of unsigned chars output so */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + unsigned char* opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: ascii or binary */ + unsigned long adler; /* adler32 value of the uncompressed data */ + unsigned long reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream *z_streamp; + + +/* file_in_zip_read_info_s contain internal information about a file in zipfile, + when reading and decompress it */ +typedef struct +{ + char *read_buffer; /* internal buffer for compressed data */ + z_stream stream; /* zLib stream structure for inflate */ + + unsigned long pos_in_zipfile; /* position in unsigned char on the zipfile, for fseek*/ + unsigned long stream_initialised; /* flag set if stream structure is initialised*/ + + unsigned long offset_local_extrafield;/* offset of the static extra field */ + unsigned int size_local_extrafield;/* size of the static extra field */ + unsigned long pos_local_extrafield; /* position in the static extra field in read*/ + + unsigned long crc32; /* crc32 of all data uncompressed */ + unsigned long crc32_wait; /* crc32 we must obtain after decompress all */ + unsigned long rest_read_compressed; /* number of unsigned char to be decompressed */ + unsigned long rest_read_uncompressed;/*number of unsigned char to be obtained after decomp*/ + FILE* file; /* io structore of the zipfile */ + unsigned long compression_method; /* compression method (0==store) */ + unsigned long byte_before_the_zipfile;/* unsigned char before the zipfile, (>0 for sfx)*/ +} file_in_zip_read_info_s; + + +/* unz_s contain internal information about the zipfile +*/ +typedef struct +{ + FILE* file; /* io structore of the zipfile */ + unz_global_info gi; /* public global information */ + unsigned long byte_before_the_zipfile;/* unsigned char before the zipfile, (>0 for sfx)*/ + unsigned long num_file; /* number of the current file in the zipfile*/ + unsigned long pos_in_central_dir; /* pos of the current file in the central dir*/ + unsigned long current_file_ok; /* flag about the usability of the current file*/ + unsigned long central_pos; /* position of the beginning of the central dir*/ + + unsigned long size_central_dir; /* size of the central directory */ + unsigned long offset_central_dir; /* offset of start of central directory with + respect to the starting disk number */ + + unz_file_info cur_file_info; /* public info about the current file in zip*/ + unz_file_info_internal cur_file_info_internal; /* private info about it*/ + file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current + file if we are decompressing it */ +} unz_s; + +#define UNZ_OK (0) +#define UNZ_END_OF_LIST_OF_FILE (-100) +#define UNZ_ERRNO (Z_ERRNO) +#define UNZ_EOF (0) +#define UNZ_PARAMERROR (-102) +#define UNZ_BADZIPFILE (-103) +#define UNZ_INTERNALERROR (-104) +#define UNZ_CRCERROR (-105) + +#define UNZ_CASESENSITIVE 1 +#define UNZ_NOTCASESENSITIVE 2 +#define UNZ_OSDEFAULTCASE 0 + +extern int unzStringFileNameCompare (const char* fileName1, const char* fileName2, int iCaseSensitivity); + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) +*/ + +extern unzFile unzOpen (const char *path); +extern unzFile unzReOpen (const char* path, unzFile file); + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\zlib\\zlib111.zip" or on an Unix computer + "zlib/zlib111.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ + +extern int unzClose (unzFile file); + +/* + Close a ZipFile opened with unzipOpen. + If there is files inside the .Zip opened with unzOpenCurrentFile (see later), + these files MUST be closed with unzipCloseCurrentFile before call unzipClose. + return UNZ_OK if there is no problem. */ + +extern int unzGetGlobalInfo (unzFile file, unz_global_info *pglobal_info); + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ + + +extern int unzGetGlobalComment (unzFile file, char *szComment, unsigned long uSizeBuf); + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of unsigned char copied or an error code <0 +*/ + + +/***************************************************************************/ +/* Unzip package allow you browse the directory of the zipfile */ + +extern int unzGoToFirstFile (unzFile file); + +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ + +extern int unzGoToNextFile (unzFile file); + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ + +extern int unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity); + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ + + +extern int unzGetCurrentFileInfo (unzFile file, unz_file_info *pfile_info, char *szFileName, unsigned long fileNameBufferSize, void *extraField, unsigned long extraFieldBufferSize, char *szComment, unsigned long commentBufferSize); + +/* + Get Info about the current file + if pfile_info!=NULL, the *pfile_info structure will contain somes info about + the current file + if szFileName!=NULL, the filemane string will be copied in szFileName + (fileNameBufferSize is the size of the buffer) + if extraField!=NULL, the extra field information will be copied in extraField + (extraFieldBufferSize is the size of the buffer). + This is the Central-header version of the extra field + if szComment!=NULL, the comment string of the file will be copied in szComment + (commentBufferSize is the size of the buffer) +*/ + +/***************************************************************************/ +/* for reading the content of the current zipfile, you can open it, read data + from it, and close it (you can close it before reading all the file) + */ + +extern int unzOpenCurrentFile (unzFile file); + +/* + Open for reading data the current file in the zipfile. + If there is no error, the return value is UNZ_OK. +*/ + +extern int unzCloseCurrentFile (unzFile file); + +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ + + +extern int unzReadCurrentFile (unzFile file, void* buf, unsigned len); + +/* + Read unsigned chars from the current file (opened by unzOpenCurrentFile) + buf contain buffer where data must be copied + len the size of buf. + + return the number of unsigned char copied if somes unsigned chars are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ + +extern long unztell(unzFile file); + +/* + Give the current position in uncompressed data +*/ + +extern int unzeof (unzFile file); + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ + +extern int unzGetLocalExtrafield (unzFile file, void* buf, unsigned len); + +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of unsigned chars copied in buf, or (if <0) + the error code +*/ diff --git a/libs/pakstuff.h b/libs/pakstuff.h index 2daf64b..820b5c6 100755 --- a/libs/pakstuff.h +++ b/libs/pakstuff.h @@ -19,123 +19,123 @@ along with Foobar; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA =========================================================================== */ -#ifndef _PAKSTUFF_H_ -#define _PAKSTUFF_H_ - -#include -#ifdef __cplusplus -extern "C" -{ -#endif - -typedef char Int8; -typedef short Int16; -typedef long Int32; -typedef unsigned char UInt8; -typedef unsigned short UInt16; -typedef unsigned long UInt32; -typedef float Float32; -typedef double Float64; -#define MAX(a, b) (((a) > (b)) ? (a) : (b)) -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define RANDOM(x) (random() % (x)) -#define RANDOMIZE() srand((int) time(NULL)) - -#define FTYPE_UNKNOWN 0 -#define FTYPE_IWAD 1 /* .wad "IWAD" */ -#define FTYPE_PWAD 2 /* .wad "PWAD" */ -#define FTYPE_PACK 3 /* .pak "PACK" */ -#define FTYPE_WAD2 4 /* .wad "WAD2" */ -#define FTYPE_BSP 10 /* .bsp (0x17 0x00 0x00 0x00) */ -#define FTYPE_MODEL 11 /* .mdl "IDPO" */ -#define FTYPE_SPRITE 12 /* .spr "IDSP" */ -#define FTYPE_WAV 20 /* .wav "RIFF" */ -#define FTYPE_AU 21 /* .au ".snd" */ -#define FTYPE_VOC 22 /* .voc ? */ -#define FTYPE_PBM_ASC 30 /* .pbm "P1" */ -#define FTYPE_PGM_ASC 31 /* .pgm "P2" */ -#define FTYPE_PPM_ASC 32 /* .ppm "P3" */ -#define FTYPE_PBM_RAW 33 /* .pbm "P4" */ -#define FTYPE_PGM_RAW 34 /* .pgm "P5" */ -#define FTYPE_PPM_RAW 35 /* .ppm "P6" */ -#define FTYPE_BMP 36 /* .bmp "BM" */ -#define FTYPE_GIF 37 /* .gif "GIF8" */ -#define FTYPE_PCX 38 /* .pcx (0x0a 0x05 0x01 0x08) */ -#define FTYPE_ERROR -1 - -#ifdef FAT_ENDIAN -Bool ReadInt16 (FILE *file, UInt16 huge *x); -Bool ReadInt32 (FILE *file, UInt32 huge *x); -Bool ReadFloat32 (FILE *file, Float32 huge *x); -Bool WriteInt16 (FILE *file, UInt16 huge *x); -Bool WriteInt32 (FILE *file, UInt32 huge *x); -Bool WriteFloat32 (FILE *file, Float32 huge *x); -UInt16 SwapInt16 (UInt16 x); -UInt32 SwapInt32 (UInt32 x); -Float32 SwapFloat32 (Float32 x); -#else -#define ReadInt16(f, p) ReadBytes((f), (p), 2L) -#define ReadInt32(f, p) ReadBytes((f), (p), 4L) -#define ReadFloat32(f, p) ReadBytes((f), (p), 4L) -#define WriteInt16(f, p) WriteBytes((f), (p), 2L) -#define WriteInt32(f, p) WriteBytes((f), (p), 4L) -#define WriteFloat32(f, p) WriteBytes((f), (p), 4L) -#define SwapInt16(x) (x) -#define SwapInt32(x) (x) -#define SwapFloat32(x) (x) -#endif /* FAT_ENDIAN */ - -#define FROMDISK -1 -struct PACKDirectory -{ - char name[56]; /* name of file */ - UInt32 offset; /* offset to start of data */ - UInt32 size; /* byte size of data */ -}; -typedef struct PACKDirectory *PACKDirPtr; - -typedef struct DirListStruct -{ - char dirname[1024]; - int from; - struct DirListStruct *next; -} DIRLIST; - -typedef struct FileListStruct -{ - char filename[1024]; - UInt32 offset; - UInt32 size; - struct FileListStruct *next; -} FILELIST; - -typedef struct DirStruct -{ - char name[1024]; - FILELIST *files; - struct DirStruct *next; -} DIRECTORY; - - -extern int m_nPAKIndex; -extern FILE* pakfile[16]; -extern boolean pakopen; -extern DIRECTORY *paktextures; - -void ClearFileList (FILELIST **); -void ClearDirList (DIRLIST **); -boolean GetPackFileList (FILELIST **, char *); -boolean GetPackTextureDirs (DIRLIST **); -boolean AddToDirListAlphabetized (DIRLIST **, char *, int); -boolean AddToFileListAlphabetized (FILELIST **t, char *, UInt32, UInt32, boolean); -boolean PakLoadFile (const char *, void **); -void OpenPakFile (const char *); -void ClosePakFile (void); -int PakLoadAnyFile(const char *filename, void **bufferptr); -void WINAPI InitPakFile(const char * pBasePath, const char *pName); - -#ifdef __cplusplus -} -#endif - -#endif +#ifndef _PAKSTUFF_H_ +#define _PAKSTUFF_H_ + +#include +#ifdef __cplusplus +extern "C" +{ +#endif + +typedef char Int8; +typedef short Int16; +typedef long Int32; +typedef unsigned char UInt8; +typedef unsigned short UInt16; +typedef unsigned long UInt32; +typedef float Float32; +typedef double Float64; +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define RANDOM(x) (random() % (x)) +#define RANDOMIZE() srand((int) time(NULL)) + +#define FTYPE_UNKNOWN 0 +#define FTYPE_IWAD 1 /* .wad "IWAD" */ +#define FTYPE_PWAD 2 /* .wad "PWAD" */ +#define FTYPE_PACK 3 /* .pak "PACK" */ +#define FTYPE_WAD2 4 /* .wad "WAD2" */ +#define FTYPE_BSP 10 /* .bsp (0x17 0x00 0x00 0x00) */ +#define FTYPE_MODEL 11 /* .mdl "IDPO" */ +#define FTYPE_SPRITE 12 /* .spr "IDSP" */ +#define FTYPE_WAV 20 /* .wav "RIFF" */ +#define FTYPE_AU 21 /* .au ".snd" */ +#define FTYPE_VOC 22 /* .voc ? */ +#define FTYPE_PBM_ASC 30 /* .pbm "P1" */ +#define FTYPE_PGM_ASC 31 /* .pgm "P2" */ +#define FTYPE_PPM_ASC 32 /* .ppm "P3" */ +#define FTYPE_PBM_RAW 33 /* .pbm "P4" */ +#define FTYPE_PGM_RAW 34 /* .pgm "P5" */ +#define FTYPE_PPM_RAW 35 /* .ppm "P6" */ +#define FTYPE_BMP 36 /* .bmp "BM" */ +#define FTYPE_GIF 37 /* .gif "GIF8" */ +#define FTYPE_PCX 38 /* .pcx (0x0a 0x05 0x01 0x08) */ +#define FTYPE_ERROR -1 + +#ifdef FAT_ENDIAN +Bool ReadInt16 (FILE *file, UInt16 huge *x); +Bool ReadInt32 (FILE *file, UInt32 huge *x); +Bool ReadFloat32 (FILE *file, Float32 huge *x); +Bool WriteInt16 (FILE *file, UInt16 huge *x); +Bool WriteInt32 (FILE *file, UInt32 huge *x); +Bool WriteFloat32 (FILE *file, Float32 huge *x); +UInt16 SwapInt16 (UInt16 x); +UInt32 SwapInt32 (UInt32 x); +Float32 SwapFloat32 (Float32 x); +#else +#define ReadInt16(f, p) ReadBytes((f), (p), 2L) +#define ReadInt32(f, p) ReadBytes((f), (p), 4L) +#define ReadFloat32(f, p) ReadBytes((f), (p), 4L) +#define WriteInt16(f, p) WriteBytes((f), (p), 2L) +#define WriteInt32(f, p) WriteBytes((f), (p), 4L) +#define WriteFloat32(f, p) WriteBytes((f), (p), 4L) +#define SwapInt16(x) (x) +#define SwapInt32(x) (x) +#define SwapFloat32(x) (x) +#endif /* FAT_ENDIAN */ + +#define FROMDISK -1 +struct PACKDirectory +{ + char name[56]; /* name of file */ + UInt32 offset; /* offset to start of data */ + UInt32 size; /* byte size of data */ +}; +typedef struct PACKDirectory *PACKDirPtr; + +typedef struct DirListStruct +{ + char dirname[1024]; + int from; + struct DirListStruct *next; +} DIRLIST; + +typedef struct FileListStruct +{ + char filename[1024]; + UInt32 offset; + UInt32 size; + struct FileListStruct *next; +} FILELIST; + +typedef struct DirStruct +{ + char name[1024]; + FILELIST *files; + struct DirStruct *next; +} DIRECTORY; + + +extern int m_nPAKIndex; +extern FILE* pakfile[16]; +extern boolean pakopen; +extern DIRECTORY *paktextures; + +void ClearFileList (FILELIST **); +void ClearDirList (DIRLIST **); +boolean GetPackFileList (FILELIST **, char *); +boolean GetPackTextureDirs (DIRLIST **); +boolean AddToDirListAlphabetized (DIRLIST **, char *, int); +boolean AddToFileListAlphabetized (FILELIST **t, char *, UInt32, UInt32, boolean); +boolean PakLoadFile (const char *, void **); +void OpenPakFile (const char *); +void ClosePakFile (void); +int PakLoadAnyFile(const char *filename, void **bufferptr); +void WINAPI InitPakFile(const char * pBasePath, const char *pName); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libs/str.h b/libs/str.h index 60ff918..fb10f70 100755 --- a/libs/str.h +++ b/libs/str.h @@ -19,196 +19,196 @@ along with Foobar; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA =========================================================================== */ -#ifndef __STR__ -#define __STR__ -// -// class Str -// loose replacement for CString from MFC -// -//#include "cmdlib.h" -#include - -char* __StrDup(char* pStr); -char* __StrDup(const char* pStr); - - - -static char *g_pStrWork = NULL; - -class Str -{ -protected: - bool m_bIgnoreCase; - char *m_pStr; - -public: - Str() - { - m_bIgnoreCase = true; - m_pStr = NULL; - } - - Str(char *p) - { - m_bIgnoreCase = true; - m_pStr = __StrDup(p); - } - - Str(const char *p) - { - m_bIgnoreCase = true; - m_pStr = __StrDup(p); - } - - void Deallocate() - { - delete []m_pStr; - m_pStr = NULL; - } - - void Allocate(int n) - { - Deallocate(); - m_pStr = new char[n]; - } - - const char* GetBuffer() - { - return m_pStr; - } - - void MakeEmpty() - { - Deallocate(); - m_pStr = __StrDup(""); - } - - ~Str() - { - Deallocate(); - delete []g_pStrWork; - g_pStrWork = NULL; - } - - void MakeLower() - { - if (m_pStr) - { - strlwr(m_pStr); - } - } - - int Find(const char *p) - { - char *pf = strstr(m_pStr, p); - return (pf) ? (pf - m_pStr) : -1; - } - - int GetLength() - { - return (m_pStr) ? strlen(m_pStr) : 0; - } - - const char* Left(int n) - { - delete []g_pStrWork; - if (n > 0) - { - g_pStrWork = new char[n+1]; - strncpy(g_pStrWork, m_pStr, n); - } - else - { - g_pStrWork = ""; - g_pStrWork = new char[1]; - g_pStrWork[0] = '\0'; - } - return g_pStrWork; - } - - const char* Right(int n) - { - delete []g_pStrWork; - if (n > 0) - { - g_pStrWork = new char[n+1]; - int nStart = GetLength() - n; - strncpy(g_pStrWork, &m_pStr[nStart], n); - g_pStrWork[n] = '\0'; - } - else - { - g_pStrWork = new char[1]; - g_pStrWork[0] = '\0'; - } - return g_pStrWork; - } - - - char& operator *() { return *m_pStr; } - char& operator *() const { return *const_cast(this)->m_pStr; } - operator void*() { return m_pStr; } - operator char*() { return m_pStr; } - operator const char*(){ return reinterpret_cast(m_pStr); } - operator unsigned char*() { return reinterpret_cast(m_pStr); } - operator const unsigned char*() { return reinterpret_cast(m_pStr); } - Str& operator =(const Str& rhs) - { - if (&rhs != this) - { - delete[] m_pStr; - m_pStr = __StrDup(rhs.m_pStr); - } - return *this; - } - - Str& operator =(const char* pStr) - { - if (m_pStr != pStr) - { - delete[] m_pStr; - m_pStr = __StrDup(pStr); - } - return *this; - } - - Str& operator +=(const char *pStr) - { - if (pStr) - { - if (m_pStr) - { - char *p = new char[strlen(m_pStr) + strlen(pStr) + 1]; - strcpy(p, m_pStr); - strcat(p, pStr); - delete m_pStr; - m_pStr = p; - } - else - { - m_pStr = __StrDup(pStr); - } - } - return *this; - } - - Str& operator +=(const char c) - { - return operator+=(&c); - } - - - bool operator ==(const Str& rhs) const { return (m_bIgnoreCase) ? stricmp(m_pStr, rhs.m_pStr) == 0 : strcmp(m_pStr, rhs.m_pStr) == 0; } - bool operator ==(char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) == 0 : strcmp(m_pStr, pStr) == 0; } - bool operator ==(const char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) == 0 : strcmp(m_pStr, pStr) == 0; } - bool operator !=(Str& rhs) const { return (m_bIgnoreCase) ? stricmp(m_pStr, rhs.m_pStr) != 0 : strcmp(m_pStr, rhs.m_pStr) != 0; } - bool operator !=(char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) != 0 : strcmp(m_pStr, pStr) != 0; } - bool operator !=(const char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) != 0 : strcmp(m_pStr, pStr) != 0; } - char& operator [](int nIndex) { return m_pStr[nIndex]; } - char& operator [](int nIndex) const { return m_pStr[nIndex]; } - -}; - - - +#ifndef __STR__ +#define __STR__ +// +// class Str +// loose replacement for CString from MFC +// +//#include "cmdlib.h" +#include + +char* __StrDup(char* pStr); +char* __StrDup(const char* pStr); + + + +static char *g_pStrWork = NULL; + +class Str +{ +protected: + bool m_bIgnoreCase; + char *m_pStr; + +public: + Str() + { + m_bIgnoreCase = true; + m_pStr = NULL; + } + + Str(char *p) + { + m_bIgnoreCase = true; + m_pStr = __StrDup(p); + } + + Str(const char *p) + { + m_bIgnoreCase = true; + m_pStr = __StrDup(p); + } + + void Deallocate() + { + delete []m_pStr; + m_pStr = NULL; + } + + void Allocate(int n) + { + Deallocate(); + m_pStr = new char[n]; + } + + const char* GetBuffer() + { + return m_pStr; + } + + void MakeEmpty() + { + Deallocate(); + m_pStr = __StrDup(""); + } + + ~Str() + { + Deallocate(); + delete []g_pStrWork; + g_pStrWork = NULL; + } + + void MakeLower() + { + if (m_pStr) + { + strlwr(m_pStr); + } + } + + int Find(const char *p) + { + char *pf = strstr(m_pStr, p); + return (pf) ? (pf - m_pStr) : -1; + } + + int GetLength() + { + return (m_pStr) ? strlen(m_pStr) : 0; + } + + const char* Left(int n) + { + delete []g_pStrWork; + if (n > 0) + { + g_pStrWork = new char[n+1]; + strncpy(g_pStrWork, m_pStr, n); + } + else + { + g_pStrWork = ""; + g_pStrWork = new char[1]; + g_pStrWork[0] = '\0'; + } + return g_pStrWork; + } + + const char* Right(int n) + { + delete []g_pStrWork; + if (n > 0) + { + g_pStrWork = new char[n+1]; + int nStart = GetLength() - n; + strncpy(g_pStrWork, &m_pStr[nStart], n); + g_pStrWork[n] = '\0'; + } + else + { + g_pStrWork = new char[1]; + g_pStrWork[0] = '\0'; + } + return g_pStrWork; + } + + + char& operator *() { return *m_pStr; } + char& operator *() const { return *const_cast(this)->m_pStr; } + operator void*() { return m_pStr; } + operator char*() { return m_pStr; } + operator const char*(){ return reinterpret_cast(m_pStr); } + operator unsigned char*() { return reinterpret_cast(m_pStr); } + operator const unsigned char*() { return reinterpret_cast(m_pStr); } + Str& operator =(const Str& rhs) + { + if (&rhs != this) + { + delete[] m_pStr; + m_pStr = __StrDup(rhs.m_pStr); + } + return *this; + } + + Str& operator =(const char* pStr) + { + if (m_pStr != pStr) + { + delete[] m_pStr; + m_pStr = __StrDup(pStr); + } + return *this; + } + + Str& operator +=(const char *pStr) + { + if (pStr) + { + if (m_pStr) + { + char *p = new char[strlen(m_pStr) + strlen(pStr) + 1]; + strcpy(p, m_pStr); + strcat(p, pStr); + delete m_pStr; + m_pStr = p; + } + else + { + m_pStr = __StrDup(pStr); + } + } + return *this; + } + + Str& operator +=(const char c) + { + return operator+=(&c); + } + + + bool operator ==(const Str& rhs) const { return (m_bIgnoreCase) ? stricmp(m_pStr, rhs.m_pStr) == 0 : strcmp(m_pStr, rhs.m_pStr) == 0; } + bool operator ==(char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) == 0 : strcmp(m_pStr, pStr) == 0; } + bool operator ==(const char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) == 0 : strcmp(m_pStr, pStr) == 0; } + bool operator !=(Str& rhs) const { return (m_bIgnoreCase) ? stricmp(m_pStr, rhs.m_pStr) != 0 : strcmp(m_pStr, rhs.m_pStr) != 0; } + bool operator !=(char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) != 0 : strcmp(m_pStr, pStr) != 0; } + bool operator !=(const char* pStr) const { return (m_bIgnoreCase) ? stricmp(m_pStr, pStr) != 0 : strcmp(m_pStr, pStr) != 0; } + char& operator [](int nIndex) { return m_pStr[nIndex]; } + char& operator [](int nIndex) const { return m_pStr[nIndex]; } + +}; + + + #endif \ No newline at end of file -- cgit v1.2.3