From 952c5c128f9efaea89d41d882c4ea3ade7df4591 Mon Sep 17 00:00:00 2001 From: zakk Date: Fri, 26 Aug 2005 04:48:05 +0000 Subject: Itsa me, quake3io! git-svn-id: svn://svn.icculus.org/quake3/trunk@2 edf5b092-35ff-0310-97b2-ce42778d08ea --- code/renderer/tr_marks.c | 443 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 443 insertions(+) create mode 100755 code/renderer/tr_marks.c (limited to 'code/renderer/tr_marks.c') diff --git a/code/renderer/tr_marks.c b/code/renderer/tr_marks.c new file mode 100755 index 0000000..f5f6e97 --- /dev/null +++ b/code/renderer/tr_marks.c @@ -0,0 +1,443 @@ +/* +=========================================================================== +Copyright (C) 1999-2005 Id Software, Inc. + +This file is part of Quake III Arena source code. + +Quake III Arena source code is free software; you can redistribute it +and/or modify it under the terms of the GNU General Public License as +published by the Free Software Foundation; either version 2 of the License, +or (at your option) any later version. + +Quake III Arena source code is distributed in the hope that it will be +useful, but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with Foobar; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +=========================================================================== +*/ +// tr_marks.c -- polygon projection on the world polygons + +#include "tr_local.h" +//#include "assert.h" + +#define MAX_VERTS_ON_POLY 64 + +#define MARKER_OFFSET 0 // 1 + +/* +============= +R_ChopPolyBehindPlane + +Out must have space for two more vertexes than in +============= +*/ +#define SIDE_FRONT 0 +#define SIDE_BACK 1 +#define SIDE_ON 2 +static void R_ChopPolyBehindPlane( int numInPoints, vec3_t inPoints[MAX_VERTS_ON_POLY], + int *numOutPoints, vec3_t outPoints[MAX_VERTS_ON_POLY], + vec3_t normal, vec_t dist, vec_t epsilon) { + float dists[MAX_VERTS_ON_POLY+4]; + int sides[MAX_VERTS_ON_POLY+4]; + int counts[3]; + float dot; + int i, j; + float *p1, *p2, *clip; + float d; + + // don't clip if it might overflow + if ( numInPoints >= MAX_VERTS_ON_POLY - 2 ) { + *numOutPoints = 0; + return; + } + + counts[0] = counts[1] = counts[2] = 0; + + // determine sides for each point + for ( i = 0 ; i < numInPoints ; i++ ) { + dot = DotProduct( inPoints[i], normal ); + dot -= dist; + dists[i] = dot; + if ( dot > epsilon ) { + sides[i] = SIDE_FRONT; + } else if ( dot < -epsilon ) { + sides[i] = SIDE_BACK; + } else { + sides[i] = SIDE_ON; + } + counts[sides[i]]++; + } + sides[i] = sides[0]; + dists[i] = dists[0]; + + *numOutPoints = 0; + + if ( !counts[0] ) { + return; + } + if ( !counts[1] ) { + *numOutPoints = numInPoints; + Com_Memcpy( outPoints, inPoints, numInPoints * sizeof(vec3_t) ); + return; + } + + for ( i = 0 ; i < numInPoints ; i++ ) { + p1 = inPoints[i]; + clip = outPoints[ *numOutPoints ]; + + if ( sides[i] == SIDE_ON ) { + VectorCopy( p1, clip ); + (*numOutPoints)++; + continue; + } + + if ( sides[i] == SIDE_FRONT ) { + VectorCopy( p1, clip ); + (*numOutPoints)++; + clip = outPoints[ *numOutPoints ]; + } + + if ( sides[i+1] == SIDE_ON || sides[i+1] == sides[i] ) { + continue; + } + + // generate a split point + p2 = inPoints[ (i+1) % numInPoints ]; + + d = dists[i] - dists[i+1]; + if ( d == 0 ) { + dot = 0; + } else { + dot = dists[i] / d; + } + + // clip xyz + + for (j=0 ; j<3 ; j++) { + clip[j] = p1[j] + dot * ( p2[j] - p1[j] ); + } + + (*numOutPoints)++; + } +} + +/* +================= +R_BoxSurfaces_r + +================= +*/ +void R_BoxSurfaces_r(mnode_t *node, vec3_t mins, vec3_t maxs, surfaceType_t **list, int listsize, int *listlength, vec3_t dir) { + + int s, c; + msurface_t *surf, **mark; + + // do the tail recursion in a loop + while ( node->contents == -1 ) { + s = BoxOnPlaneSide( mins, maxs, node->plane ); + if (s == 1) { + node = node->children[0]; + } else if (s == 2) { + node = node->children[1]; + } else { + R_BoxSurfaces_r(node->children[0], mins, maxs, list, listsize, listlength, dir); + node = node->children[1]; + } + } + + // add the individual surfaces + mark = node->firstmarksurface; + c = node->nummarksurfaces; + while (c--) { + // + if (*listlength >= listsize) break; + // + surf = *mark; + // check if the surface has NOIMPACT or NOMARKS set + if ( ( surf->shader->surfaceFlags & ( SURF_NOIMPACT | SURF_NOMARKS ) ) + || ( surf->shader->contentFlags & CONTENTS_FOG ) ) { + surf->viewCount = tr.viewCount; + } + // extra check for surfaces to avoid list overflows + else if (*(surf->data) == SF_FACE) { + // the face plane should go through the box + s = BoxOnPlaneSide( mins, maxs, &(( srfSurfaceFace_t * ) surf->data)->plane ); + if (s == 1 || s == 2) { + surf->viewCount = tr.viewCount; + } else if (DotProduct((( srfSurfaceFace_t * ) surf->data)->plane.normal, dir) > -0.5) { + // don't add faces that make sharp angles with the projection direction + surf->viewCount = tr.viewCount; + } + } + else if (*(surfaceType_t *) (surf->data) != SF_GRID) surf->viewCount = tr.viewCount; + // check the viewCount because the surface may have + // already been added if it spans multiple leafs + if (surf->viewCount != tr.viewCount) { + surf->viewCount = tr.viewCount; + list[*listlength] = (surfaceType_t *) surf->data; + (*listlength)++; + } + mark++; + } +} + +/* +================= +R_AddMarkFragments + +================= +*/ +void R_AddMarkFragments(int numClipPoints, vec3_t clipPoints[2][MAX_VERTS_ON_POLY], + int numPlanes, vec3_t *normals, float *dists, + int maxPoints, vec3_t pointBuffer, + int maxFragments, markFragment_t *fragmentBuffer, + int *returnedPoints, int *returnedFragments, + vec3_t mins, vec3_t maxs) { + int pingPong, i; + markFragment_t *mf; + + // chop the surface by all the bounding planes of the to be projected polygon + pingPong = 0; + + for ( i = 0 ; i < numPlanes ; i++ ) { + + R_ChopPolyBehindPlane( numClipPoints, clipPoints[pingPong], + &numClipPoints, clipPoints[!pingPong], + normals[i], dists[i], 0.5 ); + pingPong ^= 1; + if ( numClipPoints == 0 ) { + break; + } + } + // completely clipped away? + if ( numClipPoints == 0 ) { + return; + } + + // add this fragment to the returned list + if ( numClipPoints + (*returnedPoints) > maxPoints ) { + return; // not enough space for this polygon + } + /* + // all the clip points should be within the bounding box + for ( i = 0 ; i < numClipPoints ; i++ ) { + int j; + for ( j = 0 ; j < 3 ; j++ ) { + if (clipPoints[pingPong][i][j] < mins[j] - 0.5) break; + if (clipPoints[pingPong][i][j] > maxs[j] + 0.5) break; + } + if (j < 3) break; + } + if (i < numClipPoints) return; + */ + + mf = fragmentBuffer + (*returnedFragments); + mf->firstPoint = (*returnedPoints); + mf->numPoints = numClipPoints; + Com_Memcpy( pointBuffer + (*returnedPoints) * 3, clipPoints[pingPong], numClipPoints * sizeof(vec3_t) ); + + (*returnedPoints) += numClipPoints; + (*returnedFragments)++; +} + +/* +================= +R_MarkFragments + +================= +*/ +int R_MarkFragments( int numPoints, const vec3_t *points, const vec3_t projection, + int maxPoints, vec3_t pointBuffer, int maxFragments, markFragment_t *fragmentBuffer ) { + int numsurfaces, numPlanes; + int i, j, k, m, n; + surfaceType_t *surfaces[64]; + vec3_t mins, maxs; + int returnedFragments; + int returnedPoints; + vec3_t normals[MAX_VERTS_ON_POLY+2]; + float dists[MAX_VERTS_ON_POLY+2]; + vec3_t clipPoints[2][MAX_VERTS_ON_POLY]; + int numClipPoints; + float *v; + srfSurfaceFace_t *surf; + srfGridMesh_t *cv; + drawVert_t *dv; + vec3_t normal; + vec3_t projectionDir; + vec3_t v1, v2; + int *indexes; + + //increment view count for double check prevention + tr.viewCount++; + + // + VectorNormalize2( projection, projectionDir ); + // find all the brushes that are to be considered + ClearBounds( mins, maxs ); + for ( i = 0 ; i < numPoints ; i++ ) { + vec3_t temp; + + AddPointToBounds( points[i], mins, maxs ); + VectorAdd( points[i], projection, temp ); + AddPointToBounds( temp, mins, maxs ); + // make sure we get all the leafs (also the one(s) in front of the hit surface) + VectorMA( points[i], -20, projectionDir, temp ); + AddPointToBounds( temp, mins, maxs ); + } + + if (numPoints > MAX_VERTS_ON_POLY) numPoints = MAX_VERTS_ON_POLY; + // create the bounding planes for the to be projected polygon + for ( i = 0 ; i < numPoints ; i++ ) { + VectorSubtract(points[(i+1)%numPoints], points[i], v1); + VectorAdd(points[i], projection, v2); + VectorSubtract(points[i], v2, v2); + CrossProduct(v1, v2, normals[i]); + VectorNormalizeFast(normals[i]); + dists[i] = DotProduct(normals[i], points[i]); + } + // add near and far clipping planes for projection + VectorCopy(projectionDir, normals[numPoints]); + dists[numPoints] = DotProduct(normals[numPoints], points[0]) - 32; + VectorCopy(projectionDir, normals[numPoints+1]); + VectorInverse(normals[numPoints+1]); + dists[numPoints+1] = DotProduct(normals[numPoints+1], points[0]) - 20; + numPlanes = numPoints + 2; + + numsurfaces = 0; + R_BoxSurfaces_r(tr.world->nodes, mins, maxs, surfaces, 64, &numsurfaces, projectionDir); + //assert(numsurfaces <= 64); + //assert(numsurfaces != 64); + + returnedPoints = 0; + returnedFragments = 0; + + for ( i = 0 ; i < numsurfaces ; i++ ) { + + if (*surfaces[i] == SF_GRID) { + + cv = (srfGridMesh_t *) surfaces[i]; + for ( m = 0 ; m < cv->height - 1 ; m++ ) { + for ( n = 0 ; n < cv->width - 1 ; n++ ) { + // We triangulate the grid and chop all triangles within + // the bounding planes of the to be projected polygon. + // LOD is not taken into account, not such a big deal though. + // + // It's probably much nicer to chop the grid itself and deal + // with this grid as a normal SF_GRID surface so LOD will + // be applied. However the LOD of that chopped grid must + // be synced with the LOD of the original curve. + // One way to do this; the chopped grid shares vertices with + // the original curve. When LOD is applied to the original + // curve the unused vertices are flagged. Now the chopped curve + // should skip the flagged vertices. This still leaves the + // problems with the vertices at the chopped grid edges. + // + // To avoid issues when LOD applied to "hollow curves" (like + // the ones around many jump pads) we now just add a 2 unit + // offset to the triangle vertices. + // The offset is added in the vertex normal vector direction + // so all triangles will still fit together. + // The 2 unit offset should avoid pretty much all LOD problems. + + numClipPoints = 3; + + dv = cv->verts + m * cv->width + n; + + VectorCopy(dv[0].xyz, clipPoints[0][0]); + VectorMA(clipPoints[0][0], MARKER_OFFSET, dv[0].normal, clipPoints[0][0]); + VectorCopy(dv[cv->width].xyz, clipPoints[0][1]); + VectorMA(clipPoints[0][1], MARKER_OFFSET, dv[cv->width].normal, clipPoints[0][1]); + VectorCopy(dv[1].xyz, clipPoints[0][2]); + VectorMA(clipPoints[0][2], MARKER_OFFSET, dv[1].normal, clipPoints[0][2]); + // check the normal of this triangle + VectorSubtract(clipPoints[0][0], clipPoints[0][1], v1); + VectorSubtract(clipPoints[0][2], clipPoints[0][1], v2); + CrossProduct(v1, v2, normal); + VectorNormalizeFast(normal); + if (DotProduct(normal, projectionDir) < -0.1) { + // add the fragments of this triangle + R_AddMarkFragments(numClipPoints, clipPoints, + numPlanes, normals, dists, + maxPoints, pointBuffer, + maxFragments, fragmentBuffer, + &returnedPoints, &returnedFragments, mins, maxs); + + if ( returnedFragments == maxFragments ) { + return returnedFragments; // not enough space for more fragments + } + } + + VectorCopy(dv[1].xyz, clipPoints[0][0]); + VectorMA(clipPoints[0][0], MARKER_OFFSET, dv[1].normal, clipPoints[0][0]); + VectorCopy(dv[cv->width].xyz, clipPoints[0][1]); + VectorMA(clipPoints[0][1], MARKER_OFFSET, dv[cv->width].normal, clipPoints[0][1]); + VectorCopy(dv[cv->width+1].xyz, clipPoints[0][2]); + VectorMA(clipPoints[0][2], MARKER_OFFSET, dv[cv->width+1].normal, clipPoints[0][2]); + // check the normal of this triangle + VectorSubtract(clipPoints[0][0], clipPoints[0][1], v1); + VectorSubtract(clipPoints[0][2], clipPoints[0][1], v2); + CrossProduct(v1, v2, normal); + VectorNormalizeFast(normal); + if (DotProduct(normal, projectionDir) < -0.05) { + // add the fragments of this triangle + R_AddMarkFragments(numClipPoints, clipPoints, + numPlanes, normals, dists, + maxPoints, pointBuffer, + maxFragments, fragmentBuffer, + &returnedPoints, &returnedFragments, mins, maxs); + + if ( returnedFragments == maxFragments ) { + return returnedFragments; // not enough space for more fragments + } + } + } + } + } + else if (*surfaces[i] == SF_FACE) { + + surf = ( srfSurfaceFace_t * ) surfaces[i]; + // check the normal of this face + if (DotProduct(surf->plane.normal, projectionDir) > -0.5) { + continue; + } + + /* + VectorSubtract(clipPoints[0][0], clipPoints[0][1], v1); + VectorSubtract(clipPoints[0][2], clipPoints[0][1], v2); + CrossProduct(v1, v2, normal); + VectorNormalize(normal); + if (DotProduct(normal, projectionDir) > -0.5) continue; + */ + indexes = (int *)( (byte *)surf + surf->ofsIndices ); + for ( k = 0 ; k < surf->numIndices ; k += 3 ) { + for ( j = 0 ; j < 3 ; j++ ) { + v = surf->points[0] + VERTEXSIZE * indexes[k+j];; + VectorMA( v, MARKER_OFFSET, surf->plane.normal, clipPoints[0][j] ); + } + // add the fragments of this face + R_AddMarkFragments( 3 , clipPoints, + numPlanes, normals, dists, + maxPoints, pointBuffer, + maxFragments, fragmentBuffer, + &returnedPoints, &returnedFragments, mins, maxs); + if ( returnedFragments == maxFragments ) { + return returnedFragments; // not enough space for more fragments + } + } + continue; + } + else { + // ignore all other world surfaces + // might be cool to also project polygons on a triangle soup + // however this will probably create huge amounts of extra polys + // even more than the projection onto curves + continue; + } + } + return returnedFragments; +} + -- cgit v1.2.3