diff options
Diffstat (limited to 'code/libspeex/include')
| -rw-r--r-- | code/libspeex/include/speex/speex.h | 424 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_bits.h | 174 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_buffer.h | 68 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_callbacks.h | 134 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_config_types.h | 14 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_echo.h | 123 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_header.h | 94 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_jitter.h | 197 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_preprocess.h | 190 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_resampler.h | 340 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_stereo.h | 91 | ||||
| -rw-r--r-- | code/libspeex/include/speex/speex_types.h | 126 |
12 files changed, 1975 insertions, 0 deletions
diff --git a/code/libspeex/include/speex/speex.h b/code/libspeex/include/speex/speex.h new file mode 100644 index 0000000..82ba016 --- /dev/null +++ b/code/libspeex/include/speex/speex.h @@ -0,0 +1,424 @@ +/* Copyright (C) 2002-2006 Jean-Marc Valin*/ +/** + @file speex.h + @brief Describes the different modes of the codec +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef SPEEX_H +#define SPEEX_H +/** @defgroup Codec Speex encoder and decoder + * This is the Speex codec itself. + * @{ + */ + +#include "speex/speex_bits.h" +#include "speex/speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* Values allowed for *ctl() requests */ + +/** Set enhancement on/off (decoder only) */ +#define SPEEX_SET_ENH 0 +/** Get enhancement state (decoder only) */ +#define SPEEX_GET_ENH 1 + +/*Would be SPEEX_SET_FRAME_SIZE, but it's (currently) invalid*/ +/** Obtain frame size used by encoder/decoder */ +#define SPEEX_GET_FRAME_SIZE 3 + +/** Set quality value */ +#define SPEEX_SET_QUALITY 4 +/** Get current quality setting */ +/* #define SPEEX_GET_QUALITY 5 -- Doesn't make much sense, does it? */ + +/** Set sub-mode to use */ +#define SPEEX_SET_MODE 6 +/** Get current sub-mode in use */ +#define SPEEX_GET_MODE 7 + +/** Set low-band sub-mode to use (wideband only)*/ +#define SPEEX_SET_LOW_MODE 8 +/** Get current low-band mode in use (wideband only)*/ +#define SPEEX_GET_LOW_MODE 9 + +/** Set high-band sub-mode to use (wideband only)*/ +#define SPEEX_SET_HIGH_MODE 10 +/** Get current high-band mode in use (wideband only)*/ +#define SPEEX_GET_HIGH_MODE 11 + +/** Set VBR on (1) or off (0) */ +#define SPEEX_SET_VBR 12 +/** Get VBR status (1 for on, 0 for off) */ +#define SPEEX_GET_VBR 13 + +/** Set quality value for VBR encoding (0-10) */ +#define SPEEX_SET_VBR_QUALITY 14 +/** Get current quality value for VBR encoding (0-10) */ +#define SPEEX_GET_VBR_QUALITY 15 + +/** Set complexity of the encoder (0-10) */ +#define SPEEX_SET_COMPLEXITY 16 +/** Get current complexity of the encoder (0-10) */ +#define SPEEX_GET_COMPLEXITY 17 + +/** Set bit-rate used by the encoder (or lower) */ +#define SPEEX_SET_BITRATE 18 +/** Get current bit-rate used by the encoder or decoder */ +#define SPEEX_GET_BITRATE 19 + +/** Define a handler function for in-band Speex request*/ +#define SPEEX_SET_HANDLER 20 + +/** Define a handler function for in-band user-defined request*/ +#define SPEEX_SET_USER_HANDLER 22 + +/** Set sampling rate used in bit-rate computation */ +#define SPEEX_SET_SAMPLING_RATE 24 +/** Get sampling rate used in bit-rate computation */ +#define SPEEX_GET_SAMPLING_RATE 25 + +/** Reset the encoder/decoder memories to zero*/ +#define SPEEX_RESET_STATE 26 + +/** Get VBR info (mostly used internally) */ +#define SPEEX_GET_RELATIVE_QUALITY 29 + +/** Set VAD status (1 for on, 0 for off) */ +#define SPEEX_SET_VAD 30 + +/** Get VAD status (1 for on, 0 for off) */ +#define SPEEX_GET_VAD 31 + +/** Set Average Bit-Rate (ABR) to n bits per seconds */ +#define SPEEX_SET_ABR 32 +/** Get Average Bit-Rate (ABR) setting (in bps) */ +#define SPEEX_GET_ABR 33 + +/** Set DTX status (1 for on, 0 for off) */ +#define SPEEX_SET_DTX 34 +/** Get DTX status (1 for on, 0 for off) */ +#define SPEEX_GET_DTX 35 + +/** Set submode encoding in each frame (1 for yes, 0 for no, setting to no breaks the standard) */ +#define SPEEX_SET_SUBMODE_ENCODING 36 +/** Get submode encoding in each frame */ +#define SPEEX_GET_SUBMODE_ENCODING 37 + +/*#define SPEEX_SET_LOOKAHEAD 38*/ +/** Returns the lookahead used by Speex */ +#define SPEEX_GET_LOOKAHEAD 39 + +/** Sets tuning for packet-loss concealment (expected loss rate) */ +#define SPEEX_SET_PLC_TUNING 40 +/** Gets tuning for PLC */ +#define SPEEX_GET_PLC_TUNING 41 + +/** Sets the max bit-rate allowed in VBR mode */ +#define SPEEX_SET_VBR_MAX_BITRATE 42 +/** Gets the max bit-rate allowed in VBR mode */ +#define SPEEX_GET_VBR_MAX_BITRATE 43 + +/** Turn on/off input/output high-pass filtering */ +#define SPEEX_SET_HIGHPASS 44 +/** Get status of input/output high-pass filtering */ +#define SPEEX_GET_HIGHPASS 45 + +/** Get "activity level" of the last decoded frame, i.e. + how much damage we cause if we remove the frame */ +#define SPEEX_GET_ACTIVITY 47 + + +/* Preserving compatibility:*/ +/** Equivalent to SPEEX_SET_ENH */ +#define SPEEX_SET_PF 0 +/** Equivalent to SPEEX_GET_ENH */ +#define SPEEX_GET_PF 1 + + + + +/* Values allowed for mode queries */ +/** Query the frame size of a mode */ +#define SPEEX_MODE_FRAME_SIZE 0 + +/** Query the size of an encoded frame for a particular sub-mode */ +#define SPEEX_SUBMODE_BITS_PER_FRAME 1 + + + +/** Get major Speex version */ +#define SPEEX_LIB_GET_MAJOR_VERSION 1 +/** Get minor Speex version */ +#define SPEEX_LIB_GET_MINOR_VERSION 3 +/** Get micro Speex version */ +#define SPEEX_LIB_GET_MICRO_VERSION 5 +/** Get extra Speex version */ +#define SPEEX_LIB_GET_EXTRA_VERSION 7 +/** Get Speex version string */ +#define SPEEX_LIB_GET_VERSION_STRING 9 + +/*#define SPEEX_LIB_SET_ALLOC_FUNC 10 +#define SPEEX_LIB_GET_ALLOC_FUNC 11 +#define SPEEX_LIB_SET_FREE_FUNC 12 +#define SPEEX_LIB_GET_FREE_FUNC 13 + +#define SPEEX_LIB_SET_WARNING_FUNC 14 +#define SPEEX_LIB_GET_WARNING_FUNC 15 +#define SPEEX_LIB_SET_ERROR_FUNC 16 +#define SPEEX_LIB_GET_ERROR_FUNC 17 +*/ + +/** Number of defined modes in Speex */ +#define SPEEX_NB_MODES 3 + +/** modeID for the defined narrowband mode */ +#define SPEEX_MODEID_NB 0 + +/** modeID for the defined wideband mode */ +#define SPEEX_MODEID_WB 1 + +/** modeID for the defined ultra-wideband mode */ +#define SPEEX_MODEID_UWB 2 + +struct SpeexMode; + + +/* Prototypes for mode function pointers */ + +/** Encoder state initialization function */ +typedef void *(*encoder_init_func)(const struct SpeexMode *mode); + +/** Encoder state destruction function */ +typedef void (*encoder_destroy_func)(void *st); + +/** Main encoding function */ +typedef int (*encode_func)(void *state, void *in, SpeexBits *bits); + +/** Function for controlling the encoder options */ +typedef int (*encoder_ctl_func)(void *state, int request, void *ptr); + +/** Decoder state initialization function */ +typedef void *(*decoder_init_func)(const struct SpeexMode *mode); + +/** Decoder state destruction function */ +typedef void (*decoder_destroy_func)(void *st); + +/** Main decoding function */ +typedef int (*decode_func)(void *state, SpeexBits *bits, void *out); + +/** Function for controlling the decoder options */ +typedef int (*decoder_ctl_func)(void *state, int request, void *ptr); + + +/** Query function for a mode */ +typedef int (*mode_query_func)(const void *mode, int request, void *ptr); + +/** Struct defining a Speex mode */ +typedef struct SpeexMode { + /** Pointer to the low-level mode data */ + const void *mode; + + /** Pointer to the mode query function */ + mode_query_func query; + + /** The name of the mode (you should not rely on this to identify the mode)*/ + const char *modeName; + + /**ID of the mode*/ + int modeID; + + /**Version number of the bitstream (incremented every time we break + bitstream compatibility*/ + int bitstream_version; + + /** Pointer to encoder initialization function */ + encoder_init_func enc_init; + + /** Pointer to encoder destruction function */ + encoder_destroy_func enc_destroy; + + /** Pointer to frame encoding function */ + encode_func enc; + + /** Pointer to decoder initialization function */ + decoder_init_func dec_init; + + /** Pointer to decoder destruction function */ + decoder_destroy_func dec_destroy; + + /** Pointer to frame decoding function */ + decode_func dec; + + /** ioctl-like requests for encoder */ + encoder_ctl_func enc_ctl; + + /** ioctl-like requests for decoder */ + decoder_ctl_func dec_ctl; + +} SpeexMode; + +/** + * Returns a handle to a newly created Speex encoder state structure. For now, + * the "mode" argument can be &nb_mode or &wb_mode . In the future, more modes + * may be added. Note that for now if you have more than one channels to + * encode, you need one state per channel. + * + * @param mode The mode to use (either speex_nb_mode or speex_wb.mode) + * @return A newly created encoder state or NULL if state allocation fails + */ +void *speex_encoder_init(const SpeexMode *mode); + +/** Frees all resources associated to an existing Speex encoder state. + * @param state Encoder state to be destroyed */ +void speex_encoder_destroy(void *state); + +/** Uses an existing encoder state to encode one frame of speech pointed to by + "in". The encoded bit-stream is saved in "bits". + @param state Encoder state + @param in Frame that will be encoded with a +-2^15 range. This data MAY be + overwritten by the encoder and should be considered uninitialised + after the call. + @param bits Bit-stream where the data will be written + @return 0 if frame needs not be transmitted (DTX only), 1 otherwise + */ +int speex_encode(void *state, float *in, SpeexBits *bits); + +/** Uses an existing encoder state to encode one frame of speech pointed to by + "in". The encoded bit-stream is saved in "bits". + @param state Encoder state + @param in Frame that will be encoded with a +-2^15 range + @param bits Bit-stream where the data will be written + @return 0 if frame needs not be transmitted (DTX only), 1 otherwise + */ +int speex_encode_int(void *state, spx_int16_t *in, SpeexBits *bits); + +/** Used like the ioctl function to control the encoder parameters + * + * @param state Encoder state + * @param request ioctl-type request (one of the SPEEX_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter + */ +int speex_encoder_ctl(void *state, int request, void *ptr); + + +/** Returns a handle to a newly created decoder state structure. For now, + * the mode argument can be &nb_mode or &wb_mode . In the future, more modes + * may be added. Note that for now if you have more than one channels to + * decode, you need one state per channel. + * + * @param mode Speex mode (one of speex_nb_mode or speex_wb_mode) + * @return A newly created decoder state or NULL if state allocation fails + */ +void *speex_decoder_init(const SpeexMode *mode); + +/** Frees all resources associated to an existing decoder state. + * + * @param state State to be destroyed + */ +void speex_decoder_destroy(void *state); + +/** Uses an existing decoder state to decode one frame of speech from + * bit-stream bits. The output speech is saved written to out. + * + * @param state Decoder state + * @param bits Bit-stream from which to decode the frame (NULL if the packet was lost) + * @param out Where to write the decoded frame + * @return return status (0 for no error, -1 for end of stream, -2 corrupt stream) + */ +int speex_decode(void *state, SpeexBits *bits, float *out); + +/** Uses an existing decoder state to decode one frame of speech from + * bit-stream bits. The output speech is saved written to out. + * + * @param state Decoder state + * @param bits Bit-stream from which to decode the frame (NULL if the packet was lost) + * @param out Where to write the decoded frame + * @return return status (0 for no error, -1 for end of stream, -2 corrupt stream) + */ +int speex_decode_int(void *state, SpeexBits *bits, spx_int16_t *out); + +/** Used like the ioctl function to control the encoder parameters + * + * @param state Decoder state + * @param request ioctl-type request (one of the SPEEX_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter + */ +int speex_decoder_ctl(void *state, int request, void *ptr); + + +/** Query function for mode information + * + * @param mode Speex mode + * @param request ioctl-type request (one of the SPEEX_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter + */ +int speex_mode_query(const SpeexMode *mode, int request, void *ptr); + +/** Functions for controlling the behavior of libspeex + * @param request ioctl-type request (one of the SPEEX_LIB_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter + */ +int speex_lib_ctl(int request, void *ptr); + +/** Default narrowband mode */ +extern const SpeexMode speex_nb_mode; + +/** Default wideband mode */ +extern const SpeexMode speex_wb_mode; + +/** Default "ultra-wideband" mode */ +extern const SpeexMode speex_uwb_mode; + +/** List of all modes available */ +extern const SpeexMode * const speex_mode_list[SPEEX_NB_MODES]; + +/** Obtain one of the modes available */ +const SpeexMode * speex_lib_get_mode (int mode); + +#ifndef WIN32 +/* We actually override the function in the narrowband case so that we can avoid linking in the wideband stuff */ +#define speex_lib_get_mode(mode) ((mode)==SPEEX_MODEID_NB ? &speex_nb_mode : speex_lib_get_mode (mode)) +#endif + +#ifdef __cplusplus +} +#endif + +/** @}*/ +#endif diff --git a/code/libspeex/include/speex/speex_bits.h b/code/libspeex/include/speex/speex_bits.h new file mode 100644 index 0000000..a26fb4c --- /dev/null +++ b/code/libspeex/include/speex/speex_bits.h @@ -0,0 +1,174 @@ +/* Copyright (C) 2002 Jean-Marc Valin */ +/** + @file speex_bits.h + @brief Handles bit packing/unpacking +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef BITS_H +#define BITS_H +/** @defgroup SpeexBits SpeexBits: Bit-stream manipulations + * This is the structure that holds the bit-stream when encoding or decoding + * with Speex. It allows some manipulations as well. + * @{ + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** Bit-packing data structure representing (part of) a bit-stream. */ +typedef struct SpeexBits { + char *chars; /**< "raw" data */ + int nbBits; /**< Total number of bits stored in the stream*/ + int charPtr; /**< Position of the byte "cursor" */ + int bitPtr; /**< Position of the bit "cursor" within the current char */ + int owner; /**< Does the struct "own" the "raw" buffer (member "chars") */ + int overflow;/**< Set to one if we try to read past the valid data */ + int buf_size;/**< Allocated size for buffer */ + int reserved1; /**< Reserved for future use */ + void *reserved2; /**< Reserved for future use */ +} SpeexBits; + +/** Initializes and allocates resources for a SpeexBits struct */ +void speex_bits_init(SpeexBits *bits); + +/** Initializes SpeexBits struct using a pre-allocated buffer*/ +void speex_bits_init_buffer(SpeexBits *bits, void *buff, int buf_size); + +/** Sets the bits in a SpeexBits struct to use data from an existing buffer (for decoding without copying data) */ +void speex_bits_set_bit_buffer(SpeexBits *bits, void *buff, int buf_size); + +/** Frees all resources associated to a SpeexBits struct. Right now this does nothing since no resources are allocated, but this could change in the future.*/ +void speex_bits_destroy(SpeexBits *bits); + +/** Resets bits to initial value (just after initialization, erasing content)*/ +void speex_bits_reset(SpeexBits *bits); + +/** Rewind the bit-stream to the beginning (ready for read) without erasing the content */ +void speex_bits_rewind(SpeexBits *bits); + +/** Initializes the bit-stream from the data in an area of memory */ +void speex_bits_read_from(SpeexBits *bits, char *bytes, int len); + +/** Append bytes to the bit-stream + * + * @param bits Bit-stream to operate on + * @param bytes pointer to the bytes what will be appended + * @param len Number of bytes of append + */ +void speex_bits_read_whole_bytes(SpeexBits *bits, char *bytes, int len); + +/** Write the content of a bit-stream to an area of memory + * + * @param bits Bit-stream to operate on + * @param bytes Memory location where to write the bits + * @param max_len Maximum number of bytes to write (i.e. size of the "bytes" buffer) + * @return Number of bytes written to the "bytes" buffer +*/ +int speex_bits_write(SpeexBits *bits, char *bytes, int max_len); + +/** Like speex_bits_write, but writes only the complete bytes in the stream. Also removes the written bytes from the stream */ +int speex_bits_write_whole_bytes(SpeexBits *bits, char *bytes, int max_len); + +/** Append bits to the bit-stream + * @param bits Bit-stream to operate on + * @param data Value to append as integer + * @param nbBits number of bits to consider in "data" + */ +void speex_bits_pack(SpeexBits *bits, int data, int nbBits); + +/** Interpret the next bits in the bit-stream as a signed integer + * + * @param bits Bit-stream to operate on + * @param nbBits Number of bits to interpret + * @return A signed integer represented by the bits read + */ +int speex_bits_unpack_signed(SpeexBits *bits, int nbBits); + +/** Interpret the next bits in the bit-stream as an unsigned integer + * + * @param bits Bit-stream to operate on + * @param nbBits Number of bits to interpret + * @return An unsigned integer represented by the bits read + */ +unsigned int speex_bits_unpack_unsigned(SpeexBits *bits, int nbBits); + +/** Returns the number of bytes in the bit-stream, including the last one even if it is not "full" + * + * @param bits Bit-stream to operate on + * @return Number of bytes in the stream + */ +int speex_bits_nbytes(SpeexBits *bits); + +/** Same as speex_bits_unpack_unsigned, but without modifying the cursor position + * + * @param bits Bit-stream to operate on + * @param nbBits Number of bits to look for + * @return Value of the bits peeked, interpreted as unsigned + */ +unsigned int speex_bits_peek_unsigned(SpeexBits *bits, int nbBits); + +/** Get the value of the next bit in the stream, without modifying the + * "cursor" position + * + * @param bits Bit-stream to operate on + * @return Value of the bit peeked (one bit only) + */ +int speex_bits_peek(SpeexBits *bits); + +/** Advances the position of the "bit cursor" in the stream + * + * @param bits Bit-stream to operate on + * @param n Number of bits to advance + */ +void speex_bits_advance(SpeexBits *bits, int n); + +/** Returns the number of bits remaining to be read in a stream + * + * @param bits Bit-stream to operate on + * @return Number of bits that can still be read from the stream + */ +int speex_bits_remaining(SpeexBits *bits); + +/** Insert a terminator so that the data can be sent as a packet while auto-detecting + * the number of frames in each packet + * + * @param bits Bit-stream to operate on + */ +void speex_bits_insert_terminator(SpeexBits *bits); + +#ifdef __cplusplus +} +#endif + +/* @} */ +#endif diff --git a/code/libspeex/include/speex/speex_buffer.h b/code/libspeex/include/speex/speex_buffer.h new file mode 100644 index 0000000..df56f5f --- /dev/null +++ b/code/libspeex/include/speex/speex_buffer.h @@ -0,0 +1,68 @@ +/* Copyright (C) 2007 Jean-Marc Valin + + File: speex_buffer.h + This is a very simple ring buffer implementation. It is not thread-safe + so you need to do your own locking. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifndef SPEEX_BUFFER_H +#define SPEEX_BUFFER_H + +#include "speex/speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct SpeexBuffer_; +typedef struct SpeexBuffer_ SpeexBuffer; + +SpeexBuffer *speex_buffer_init(int size); + +void speex_buffer_destroy(SpeexBuffer *st); + +int speex_buffer_write(SpeexBuffer *st, void *data, int len); + +int speex_buffer_writezeros(SpeexBuffer *st, int len); + +int speex_buffer_read(SpeexBuffer *st, void *data, int len); + +int speex_buffer_get_available(SpeexBuffer *st); + +int speex_buffer_resize(SpeexBuffer *st, int len); + +#ifdef __cplusplus +} +#endif + +#endif + + + + diff --git a/code/libspeex/include/speex/speex_callbacks.h b/code/libspeex/include/speex/speex_callbacks.h new file mode 100644 index 0000000..6f450b3 --- /dev/null +++ b/code/libspeex/include/speex/speex_callbacks.h @@ -0,0 +1,134 @@ +/* Copyright (C) 2002 Jean-Marc Valin*/ +/** + @file speex_callbacks.h + @brief Describes callback handling and in-band signalling +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef SPEEX_CALLBACKS_H +#define SPEEX_CALLBACKS_H +/** @defgroup SpeexCallbacks Various definitions for Speex callbacks supported by the decoder. + * @{ + */ + +#include "speex.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** Total number of callbacks */ +#define SPEEX_MAX_CALLBACKS 16 + +/* Describes all the in-band requests */ + +/*These are 1-bit requests*/ +/** Request for perceptual enhancement (1 for on, 0 for off) */ +#define SPEEX_INBAND_ENH_REQUEST 0 +/** Reserved */ +#define SPEEX_INBAND_RESERVED1 1 + +/*These are 4-bit requests*/ +/** Request for a mode change */ +#define SPEEX_INBAND_MODE_REQUEST 2 +/** Request for a low mode change */ +#define SPEEX_INBAND_LOW_MODE_REQUEST 3 +/** Request for a high mode change */ +#define SPEEX_INBAND_HIGH_MODE_REQUEST 4 +/** Request for VBR (1 on, 0 off) */ +#define SPEEX_INBAND_VBR_QUALITY_REQUEST 5 +/** Request to be sent acknowledge */ +#define SPEEX_INBAND_ACKNOWLEDGE_REQUEST 6 +/** Request for VBR (1 for on, 0 for off) */ +#define SPEEX_INBAND_VBR_REQUEST 7 + +/*These are 8-bit requests*/ +/** Send a character in-band */ +#define SPEEX_INBAND_CHAR 8 +/** Intensity stereo information */ +#define SPEEX_INBAND_STEREO 9 + +/*These are 16-bit requests*/ +/** Transmit max bit-rate allowed */ +#define SPEEX_INBAND_MAX_BITRATE 10 + +/*These are 32-bit requests*/ +/** Acknowledge packet reception */ +#define SPEEX_INBAND_ACKNOWLEDGE 12 + +/** Callback function type */ +typedef int (*speex_callback_func)(SpeexBits *bits, void *state, void *data); + +/** Callback information */ +typedef struct SpeexCallback { + int callback_id; /**< ID associated to the callback */ + speex_callback_func func; /**< Callback handler function */ + void *data; /**< Data that will be sent to the handler */ + void *reserved1; /**< Reserved for future use */ + int reserved2; /**< Reserved for future use */ +} SpeexCallback; + +/** Handle in-band request */ +int speex_inband_handler(SpeexBits *bits, SpeexCallback *callback_list, void *state); + +/** Standard handler for mode request (change mode, no questions asked) */ +int speex_std_mode_request_handler(SpeexBits *bits, void *state, void *data); + +/** Standard handler for high mode request (change high mode, no questions asked) */ +int speex_std_high_mode_request_handler(SpeexBits *bits, void *state, void *data); + +/** Standard handler for in-band characters (write to stderr) */ +int speex_std_char_handler(SpeexBits *bits, void *state, void *data); + +/** Default handler for user-defined requests: in this case, just ignore */ +int speex_default_user_handler(SpeexBits *bits, void *state, void *data); + + + +/** Standard handler for low mode request (change low mode, no questions asked) */ +int speex_std_low_mode_request_handler(SpeexBits *bits, void *state, void *data); + +/** Standard handler for VBR request (Set VBR, no questions asked) */ +int speex_std_vbr_request_handler(SpeexBits *bits, void *state, void *data); + +/** Standard handler for enhancer request (Turn enhancer on/off, no questions asked) */ +int speex_std_enh_request_handler(SpeexBits *bits, void *state, void *data); + +/** Standard handler for VBR quality request (Set VBR quality, no questions asked) */ +int speex_std_vbr_quality_request_handler(SpeexBits *bits, void *state, void *data); + + +#ifdef __cplusplus +} +#endif + +/** @} */ +#endif diff --git a/code/libspeex/include/speex/speex_config_types.h b/code/libspeex/include/speex/speex_config_types.h new file mode 100644 index 0000000..f386a16 --- /dev/null +++ b/code/libspeex/include/speex/speex_config_types.h @@ -0,0 +1,14 @@ +#ifndef __SPEEX_TYPES_H__ +#define __SPEEX_TYPES_H__ + +#ifdef _MSC_VER +typedef unsigned __int16 spx_uint16_t; +typedef unsigned __int32 spx_uint32_t; +#else +#include <stdint.h> +typedef uint16_t spx_uint16_t; +typedef uint32_t spx_uint32_t; +#endif + +#endif + diff --git a/code/libspeex/include/speex/speex_echo.h b/code/libspeex/include/speex/speex_echo.h new file mode 100644 index 0000000..77a7846 --- /dev/null +++ b/code/libspeex/include/speex/speex_echo.h @@ -0,0 +1,123 @@ +/* Copyright (C) Jean-Marc Valin */ +/** + @file speex_echo.h + @brief Echo cancellation +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifndef SPEEX_ECHO_H +#define SPEEX_ECHO_H +/** @defgroup SpeexEchoState SpeexEchoState: Acoustic echo canceller + * This is the acoustic echo canceller module. + * @{ + */ +#include "speex/speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** Obtain frame size used by the AEC */ +#define SPEEX_ECHO_GET_FRAME_SIZE 3 + +/** Set sampling rate */ +#define SPEEX_ECHO_SET_SAMPLING_RATE 24 +/** Get sampling rate */ +#define SPEEX_ECHO_GET_SAMPLING_RATE 25 + +/** Internal echo canceller state. Should never be accessed directly. */ +struct SpeexEchoState_; + +/** @class SpeexEchoState + * This holds the state of the echo canceller. You need one per channel. +*/ + +/** Internal echo canceller state. Should never be accessed directly. */ +typedef struct SpeexEchoState_ SpeexEchoState; + +/** Creates a new echo canceller state + * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms) + * @param filter_length Number of samples of echo to cancel (should generally correspond to 100-500 ms) + * @return Newly-created echo canceller state + */ +SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length); + +/** Destroys an echo canceller state + * @param st Echo canceller state +*/ +void speex_echo_state_destroy(SpeexEchoState *st); + +/** Performs echo cancellation a frame, based on the audio sent to the speaker (no delay is added + * to playback in this form) + * + * @param st Echo canceller state + * @param rec Signal from the microphone (near end + far end echo) + * @param play Signal played to the speaker (received from far end) + * @param out Returns near-end signal with echo removed + */ +void speex_echo_cancellation(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out); + +/** Performs echo cancellation a frame (deprecated) */ +void speex_echo_cancel(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out, spx_int32_t *Yout); + +/** Perform echo cancellation using internal playback buffer, which is delayed by two frames + * to account for the delay introduced by most soundcards (but it could be off!) + * @param st Echo canceller state + * @param rec Signal from the microphone (near end + far end echo) + * @param out Returns near-end signal with echo removed +*/ +void speex_echo_capture(SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out); + +/** Let the echo canceller know that a frame was just queued to the soundcard + * @param st Echo canceller state + * @param play Signal played to the speaker (received from far end) +*/ +void speex_echo_playback(SpeexEchoState *st, const spx_int16_t *play); + +/** Reset the echo canceller to its original state + * @param st Echo canceller state + */ +void speex_echo_state_reset(SpeexEchoState *st); + +/** Used like the ioctl function to control the echo canceller parameters + * + * @param st Echo canceller state + * @param request ioctl-type request (one of the SPEEX_ECHO_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown + */ +int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr); + +#ifdef __cplusplus +} +#endif + + +/** @}*/ +#endif diff --git a/code/libspeex/include/speex/speex_header.h b/code/libspeex/include/speex/speex_header.h new file mode 100644 index 0000000..f85b249 --- /dev/null +++ b/code/libspeex/include/speex/speex_header.h @@ -0,0 +1,94 @@ +/* Copyright (C) 2002 Jean-Marc Valin */ +/** + @file speex_header.h + @brief Describes the Speex header +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + + +#ifndef SPEEX_HEADER_H +#define SPEEX_HEADER_H +/** @defgroup SpeexHeader SpeexHeader: Makes it easy to write/parse an Ogg/Speex header + * This is the Speex header for the Ogg encapsulation. You don't need that if you just use RTP. + * @{ + */ + +#include "speex/speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct SpeexMode; + +/** Length of the Speex header identifier */ +#define SPEEX_HEADER_STRING_LENGTH 8 + +/** Maximum number of characters for encoding the Speex version number in the header */ +#define SPEEX_HEADER_VERSION_LENGTH 20 + +/** Speex header info for file-based formats */ +typedef struct SpeexHeader { + char speex_string[SPEEX_HEADER_STRING_LENGTH]; /**< Identifies a Speex bit-stream, always set to "Speex " */ + char speex_version[SPEEX_HEADER_VERSION_LENGTH]; /**< Speex version */ + spx_int32_t speex_version_id; /**< Version for Speex (for checking compatibility) */ + spx_int32_t header_size; /**< Total size of the header ( sizeof(SpeexHeader) ) */ + spx_int32_t rate; /**< Sampling rate used */ + spx_int32_t mode; /**< Mode used (0 for narrowband, 1 for wideband) */ + spx_int32_t mode_bitstream_version; /**< Version ID of the bit-stream */ + spx_int32_t nb_channels; /**< Number of channels encoded */ + spx_int32_t bitrate; /**< Bit-rate used */ + spx_int32_t frame_size; /**< Size of frames */ + spx_int32_t vbr; /**< 1 for a VBR encoding, 0 otherwise */ + spx_int32_t frames_per_packet; /**< Number of frames stored per Ogg packet */ + spx_int32_t extra_headers; /**< Number of additional headers after the comments */ + spx_int32_t reserved1; /**< Reserved for future use, must be zero */ + spx_int32_t reserved2; /**< Reserved for future use, must be zero */ +} SpeexHeader; + +/** Initializes a SpeexHeader using basic information */ +void speex_init_header(SpeexHeader *header, int rate, int nb_channels, const struct SpeexMode *m); + +/** Creates the header packet from the header itself (mostly involves endianness conversion) */ +char *speex_header_to_packet(SpeexHeader *header, int *size); + +/** Creates a SpeexHeader from a packet */ +SpeexHeader *speex_packet_to_header(char *packet, int size); + +/** Frees the memory allocated by either speex_header_to_packet() or speex_packet_to_header() */ +void speex_header_free(void *ptr); + +#ifdef __cplusplus +} +#endif + +/** @} */ +#endif diff --git a/code/libspeex/include/speex/speex_jitter.h b/code/libspeex/include/speex/speex_jitter.h new file mode 100644 index 0000000..d68674b --- /dev/null +++ b/code/libspeex/include/speex/speex_jitter.h @@ -0,0 +1,197 @@ +/* Copyright (C) 2002 Jean-Marc Valin */ +/** + @file speex_jitter.h + @brief Adaptive jitter buffer for Speex +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef SPEEX_JITTER_H +#define SPEEX_JITTER_H +/** @defgroup JitterBuffer JitterBuffer: Adaptive jitter buffer + * This is the jitter buffer that reorders UDP/RTP packets and adjusts the buffer size + * to maintain good quality and low latency. + * @{ + */ + +#include "speex/speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** Generic adaptive jitter buffer state */ +struct JitterBuffer_; + +/** Generic adaptive jitter buffer state */ +typedef struct JitterBuffer_ JitterBuffer; + +/** Definition of an incoming packet */ +typedef struct _JitterBufferPacket JitterBufferPacket; + +/** Definition of an incoming packet */ +struct _JitterBufferPacket { + char *data; /**< Data bytes contained in the packet */ + spx_uint32_t len; /**< Length of the packet in bytes */ + spx_uint32_t timestamp; /**< Timestamp for the packet */ + spx_uint32_t span; /**< Time covered by the packet (same units as timestamp) */ + spx_uint16_t sequence; /**< RTP Sequence number if available (0 otherwise) */ + spx_uint32_t user_data; /**< Put whatever data you like here (it's ignored by the jitter buffer) */ +}; + +/** Packet has been retrieved */ +#define JITTER_BUFFER_OK 0 +/** Packet is lost or is late */ +#define JITTER_BUFFER_MISSING 1 +/** A "fake" packet is meant to be inserted here to increase buffering */ +#define JITTER_BUFFER_INSERTION 2 +/** There was an error in the jitter buffer */ +#define JITTER_BUFFER_INTERNAL_ERROR -1 +/** Invalid argument */ +#define JITTER_BUFFER_BAD_ARGUMENT -2 + + +/** Set minimum amount of extra buffering required (margin) */ +#define JITTER_BUFFER_SET_MARGIN 0 +/** Get minimum amount of extra buffering required (margin) */ +#define JITTER_BUFFER_GET_MARGIN 1 +/* JITTER_BUFFER_SET_AVAILABLE_COUNT wouldn't make sense */ + +/** Get the amount of available packets currently buffered */ +#define JITTER_BUFFER_GET_AVAILABLE_COUNT 3 +/** Included because of an early misspelling (will remove in next release) */ +#define JITTER_BUFFER_GET_AVALIABLE_COUNT 3 + +/** Assign a function to destroy unused packet. When setting that, the jitter + buffer no longer copies packet data. */ +#define JITTER_BUFFER_SET_DESTROY_CALLBACK 4 +/** */ +#define JITTER_BUFFER_GET_DESTROY_CALLBACK 5 + +/** Tell the jitter buffer to only adjust the delay in multiples of the step parameter provided */ +#define JITTER_BUFFER_SET_DELAY_STEP 6 +/** */ +#define JITTER_BUFFER_GET_DELAY_STEP 7 + +/** Tell the jitter buffer to only do concealment in multiples of the size parameter provided */ +#define JITTER_BUFFER_SET_CONCEALMENT_SIZE 8 +#define JITTER_BUFFER_GET_CONCEALMENT_SIZE 9 + +/** Absolute max amount of loss that can be tolerated regardless of the delay. Typical loss + should be half of that or less. */ +#define JITTER_BUFFER_SET_MAX_LATE_RATE 10 +#define JITTER_BUFFER_GET_MAX_LATE_RATE 11 + +/** Equivalent cost of one percent late packet in timestamp units */ +#define JITTER_BUFFER_SET_LATE_COST 12 +#define JITTER_BUFFER_GET_LATE_COST 13 + + +/** Initialises jitter buffer + * + * @param step_size Starting value for the size of concleanment packets and delay + adjustment steps. Can be changed at any time using JITTER_BUFFER_SET_DELAY_STEP + and JITTER_BUFFER_GET_CONCEALMENT_SIZE. + * @return Newly created jitter buffer state + */ +JitterBuffer *jitter_buffer_init(int step_size); + +/** Restores jitter buffer to its original state + * + * @param jitter Jitter buffer state + */ +void jitter_buffer_reset(JitterBuffer *jitter); + +/** Destroys jitter buffer + * + * @param jitter Jitter buffer state + */ +void jitter_buffer_destroy(JitterBuffer *jitter); + +/** Put one packet into the jitter buffer + * + * @param jitter Jitter buffer state + * @param packet Incoming packet +*/ +void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet); + +/** Get one packet from the jitter buffer + * + * @param jitter Jitter buffer state + * @param packet Returned packet + * @param desired_span Number of samples (or units) we wish to get from the buffer (no guarantee) + * @param current_timestamp Timestamp for the returned packet +*/ +int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t desired_span, spx_int32_t *start_offset); + +/** Used right after jitter_buffer_get() to obtain another packet that would have the same timestamp. + * This is mainly useful for media where a single "frame" can be split into several packets. + * + * @param jitter Jitter buffer state + * @param packet Returned packet + */ +int jitter_buffer_get_another(JitterBuffer *jitter, JitterBufferPacket *packet); + +/** Get pointer timestamp of jitter buffer + * + * @param jitter Jitter buffer state +*/ +int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter); + +/** Advance by one tick + * + * @param jitter Jitter buffer state +*/ +void jitter_buffer_tick(JitterBuffer *jitter); + +/** Telling the jitter buffer about the remaining data in the application buffer + * @param jitter Jitter buffer state + * @param rem Amount of data buffered by the application (timestamp units) + */ +void jitter_buffer_remaining_span(JitterBuffer *jitter, spx_uint32_t rem); + +/** Used like the ioctl function to control the jitter buffer parameters + * + * @param jitter Jitter buffer state + * @param request ioctl-type request (one of the JITTER_BUFFER_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown +*/ +int jitter_buffer_ctl(JitterBuffer *jitter, int request, void *ptr); + +int jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset); + +/* @} */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/code/libspeex/include/speex/speex_preprocess.h b/code/libspeex/include/speex/speex_preprocess.h new file mode 100644 index 0000000..a0d3aa3 --- /dev/null +++ b/code/libspeex/include/speex/speex_preprocess.h @@ -0,0 +1,190 @@ +/* Copyright (C) 2003 Epic Games + Written by Jean-Marc Valin */ +/** + * @file speex_preprocess.h + * @brief Speex preprocessor. The preprocess can do noise suppression, + * residual echo suppression (after using the echo canceller), automatic + * gain control (AGC) and voice activity detection (VAD). +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifndef SPEEX_PREPROCESS_H +#define SPEEX_PREPROCESS_H +/** @defgroup SpeexPreprocessState SpeexPreprocessState: The Speex preprocessor + * This is the Speex preprocessor. The preprocess can do noise suppression, + * residual echo suppression (after using the echo canceller), automatic + * gain control (AGC) and voice activity detection (VAD). + * @{ + */ + +#include "speex/speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** State of the preprocessor (one per channel). Should never be accessed directly. */ +struct SpeexPreprocessState_; + +/** State of the preprocessor (one per channel). Should never be accessed directly. */ +typedef struct SpeexPreprocessState_ SpeexPreprocessState; + + +/** Creates a new preprocessing state. You MUST create one state per channel processed. + * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms). Must be + * the same value as that used for the echo canceller for residual echo cancellation to work. + * @param sampling_rate Sampling rate used for the input. + * @return Newly created preprocessor state +*/ +SpeexPreprocessState *speex_preprocess_state_init(int frame_size, int sampling_rate); + +/** Destroys a preprocessor state + * @param st Preprocessor state to destroy +*/ +void speex_preprocess_state_destroy(SpeexPreprocessState *st); + +/** Preprocess a frame + * @param st Preprocessor state + * @param x Audio sample vector (in and out). Must be same size as specified in speex_preprocess_state_init(). + * @return Bool value for voice activity (1 for speech, 0 for noise/silence), ONLY if VAD turned on. +*/ +int speex_preprocess_run(SpeexPreprocessState *st, spx_int16_t *x); + +/** Preprocess a frame (deprecated, use speex_preprocess_run() instead)*/ +int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo); + +/** Update preprocessor state, but do not compute the output + * @param st Preprocessor state + * @param x Audio sample vector (in only). Must be same size as specified in speex_preprocess_state_init(). +*/ +void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x); + +/** Used like the ioctl function to control the preprocessor parameters + * @param st Preprocessor state + * @param request ioctl-type request (one of the SPEEX_PREPROCESS_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown +*/ +int speex_preprocess_ctl(SpeexPreprocessState *st, int request, void *ptr); + + + +/** Set preprocessor denoiser state */ +#define SPEEX_PREPROCESS_SET_DENOISE 0 +/** Get preprocessor denoiser state */ +#define SPEEX_PREPROCESS_GET_DENOISE 1 + +/** Set preprocessor Automatic Gain Control state */ +#define SPEEX_PREPROCESS_SET_AGC 2 +/** Get preprocessor Automatic Gain Control state */ +#define SPEEX_PREPROCESS_GET_AGC 3 + +/** Set preprocessor Voice Activity Detection state */ +#define SPEEX_PREPROCESS_SET_VAD 4 +/** Get preprocessor Voice Activity Detection state */ +#define SPEEX_PREPROCESS_GET_VAD 5 + +/** Set preprocessor Automatic Gain Control level */ +#define SPEEX_PREPROCESS_SET_AGC_LEVEL 6 +/** Get preprocessor Automatic Gain Control level */ +#define SPEEX_PREPROCESS_GET_AGC_LEVEL 7 + +/** Set preprocessor dereverb state */ +#define SPEEX_PREPROCESS_SET_DEREVERB 8 +/** Get preprocessor dereverb state */ +#define SPEEX_PREPROCESS_GET_DEREVERB 9 + +/** Set preprocessor dereverb level */ +#define SPEEX_PREPROCESS_SET_DEREVERB_LEVEL 10 +/** Get preprocessor dereverb level */ +#define SPEEX_PREPROCESS_GET_DEREVERB_LEVEL 11 + +/** Set preprocessor dereverb decay */ +#define SPEEX_PREPROCESS_SET_DEREVERB_DECAY 12 +/** Get preprocessor dereverb decay */ +#define SPEEX_PREPROCESS_GET_DEREVERB_DECAY 13 + +/** Set probability required for the VAD to go from silence to voice */ +#define SPEEX_PREPROCESS_SET_PROB_START 14 +/** Get probability required for the VAD to go from silence to voice */ +#define SPEEX_PREPROCESS_GET_PROB_START 15 + +/** Set probability required for the VAD to stay in the voice state (integer percent) */ +#define SPEEX_PREPROCESS_SET_PROB_CONTINUE 16 +/** Get probability required for the VAD to stay in the voice state (integer percent) */ +#define SPEEX_PREPROCESS_GET_PROB_CONTINUE 17 + +/** Set maximum attenuation of the noise in dB (negative number) */ +#define SPEEX_PREPROCESS_SET_NOISE_SUPPRESS 18 +/** Get maximum attenuation of the noise in dB (negative number) */ +#define SPEEX_PREPROCESS_GET_NOISE_SUPPRESS 19 + +/** Set maximum attenuation of the residual echo in dB (negative number) */ +#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS 20 +/** Get maximum attenuation of the residual echo in dB (negative number) */ +#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS 21 + +/** Set maximum attenuation of the residual echo in dB when near end is active (negative number) */ +#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS_ACTIVE 22 +/** Get maximum attenuation of the residual echo in dB when near end is active (negative number) */ +#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS_ACTIVE 23 + +/** Set the corresponding echo canceller state so that residual echo suppression can be performed (NULL for no residual echo suppression) */ +#define SPEEX_PREPROCESS_SET_ECHO_STATE 24 +/** Get the corresponding echo canceller state */ +#define SPEEX_PREPROCESS_GET_ECHO_STATE 25 + +/** Set maximal gain increase in dB/second (int32) */ +#define SPEEX_PREPROCESS_SET_AGC_INCREMENT 26 + +/** Get maximal gain increase in dB/second (int32) */ +#define SPEEX_PREPROCESS_GET_AGC_INCREMENT 27 + +/** Set maximal gain decrease in dB/second (int32) */ +#define SPEEX_PREPROCESS_SET_AGC_DECREMENT 28 + +/** Get maximal gain decrease in dB/second (int32) */ +#define SPEEX_PREPROCESS_GET_AGC_DECREMENT 29 + +/** Set maximal gain in dB (int32) */ +#define SPEEX_PREPROCESS_SET_AGC_MAX_GAIN 30 + +/** Get maximal gain in dB (int32) */ +#define SPEEX_PREPROCESS_GET_AGC_MAX_GAIN 31 + +/* Can't set loudness */ +/** Get loudness */ +#define SPEEX_PREPROCESS_GET_AGC_LOUDNESS 33 + +#ifdef __cplusplus +} +#endif + +/** @}*/ +#endif diff --git a/code/libspeex/include/speex/speex_resampler.h b/code/libspeex/include/speex/speex_resampler.h new file mode 100644 index 0000000..54eef8d --- /dev/null +++ b/code/libspeex/include/speex/speex_resampler.h @@ -0,0 +1,340 @@ +/* Copyright (C) 2007 Jean-Marc Valin + + File: speex_resampler.h + Resampling code + + The design goals of this code are: + - Very fast algorithm + - Low memory requirement + - Good *perceptual* quality (and not best SNR) + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + + +#ifndef SPEEX_RESAMPLER_H +#define SPEEX_RESAMPLER_H + +#ifdef OUTSIDE_SPEEX + +/********* WARNING: MENTAL SANITY ENDS HERE *************/ + +/* If the resampler is defined outside of Speex, we change the symbol names so that + there won't be any clash if linking with Speex later on. */ + +/* #define RANDOM_PREFIX your software name here */ +#ifndef RANDOM_PREFIX +#error "Please define RANDOM_PREFIX (above) to something specific to your project to prevent symbol name clashes" +#endif + +#define CAT_PREFIX2(a,b) a ## b +#define CAT_PREFIX(a,b) CAT_PREFIX2(a, b) + +#define speex_resampler_init CAT_PREFIX(RANDOM_PREFIX,_resampler_init) +#define speex_resampler_init_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_init_frac) +#define speex_resampler_destroy CAT_PREFIX(RANDOM_PREFIX,_resampler_destroy) +#define speex_resampler_process_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_float) +#define speex_resampler_process_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_int) +#define speex_resampler_process_interleaved_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_float) +#define speex_resampler_process_interleaved_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_int) +#define speex_resampler_set_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate) +#define speex_resampler_get_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_get_rate) +#define speex_resampler_set_rate_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate_frac) +#define speex_resampler_get_ratio CAT_PREFIX(RANDOM_PREFIX,_resampler_get_ratio) +#define speex_resampler_set_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_set_quality) +#define speex_resampler_get_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_get_quality) +#define speex_resampler_set_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_input_stride) +#define speex_resampler_get_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_stride) +#define speex_resampler_set_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_output_stride) +#define speex_resampler_get_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_stride) +#define speex_resampler_get_input_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_latency) +#define speex_resampler_get_output_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_latency) +#define speex_resampler_skip_zeros CAT_PREFIX(RANDOM_PREFIX,_resampler_skip_zeros) +#define speex_resampler_reset_mem CAT_PREFIX(RANDOM_PREFIX,_resampler_reset_mem) +#define speex_resampler_strerror CAT_PREFIX(RANDOM_PREFIX,_resampler_strerror) + +#define spx_int16_t short +#define spx_int32_t int +#define spx_uint16_t unsigned short +#define spx_uint32_t unsigned int + +#else /* OUTSIDE_SPEEX */ + +#include "speex/speex_types.h" + +#endif /* OUTSIDE_SPEEX */ + +#ifdef __cplusplus +extern "C" { +#endif + +#define SPEEX_RESAMPLER_QUALITY_MAX 10 +#define SPEEX_RESAMPLER_QUALITY_MIN 0 +#define SPEEX_RESAMPLER_QUALITY_DEFAULT 4 +#define SPEEX_RESAMPLER_QUALITY_VOIP 3 +#define SPEEX_RESAMPLER_QUALITY_DESKTOP 5 + +enum { + RESAMPLER_ERR_SUCCESS = 0, + RESAMPLER_ERR_ALLOC_FAILED = 1, + RESAMPLER_ERR_BAD_STATE = 2, + RESAMPLER_ERR_INVALID_ARG = 3, + RESAMPLER_ERR_PTR_OVERLAP = 4, + + RESAMPLER_ERR_MAX_ERROR +}; + +struct SpeexResamplerState_; +typedef struct SpeexResamplerState_ SpeexResamplerState; + +/** Create a new resampler with integer input and output rates. + * @param nb_channels Number of channels to be processed + * @param in_rate Input sampling rate (integer number of Hz). + * @param out_rate Output sampling rate (integer number of Hz). + * @param quality Resampling quality between 0 and 10, where 0 has poor quality + * and 10 has very high quality. + * @return Newly created resampler state + * @retval NULL Error: not enough memory + */ +SpeexResamplerState *speex_resampler_init(spx_uint32_t nb_channels, + spx_uint32_t in_rate, + spx_uint32_t out_rate, + int quality, + int *err); + +/** Create a new resampler with fractional input/output rates. The sampling + * rate ratio is an arbitrary rational number with both the numerator and + * denominator being 32-bit integers. + * @param nb_channels Number of channels to be processed + * @param ratio_num Numerator of the sampling rate ratio + * @param ratio_den Denominator of the sampling rate ratio + * @param in_rate Input sampling rate rounded to the nearest integer (in Hz). + * @param out_rate Output sampling rate rounded to the nearest integer (in Hz). + * @param quality Resampling quality between 0 and 10, where 0 has poor quality + * and 10 has very high quality. + * @return Newly created resampler state + * @retval NULL Error: not enough memory + */ +SpeexResamplerState *speex_resampler_init_frac(spx_uint32_t nb_channels, + spx_uint32_t ratio_num, + spx_uint32_t ratio_den, + spx_uint32_t in_rate, + spx_uint32_t out_rate, + int quality, + int *err); + +/** Destroy a resampler state. + * @param st Resampler state + */ +void speex_resampler_destroy(SpeexResamplerState *st); + +/** Resample a float array. The input and output buffers must *not* overlap. + * @param st Resampler state + * @param channel_index Index of the channel to process for the multi-channel + * base (0 otherwise) + * @param in Input buffer + * @param in_len Number of input samples in the input buffer. Returns the + * number of samples processed + * @param out Output buffer + * @param out_len Size of the output buffer. Returns the number of samples written + */ +int speex_resampler_process_float(SpeexResamplerState *st, + spx_uint32_t channel_index, + const float *in, + spx_uint32_t *in_len, + float *out, + spx_uint32_t *out_len); + +/** Resample an int array. The input and output buffers must *not* overlap. + * @param st Resampler state + * @param channel_index Index of the channel to process for the multi-channel + * base (0 otherwise) + * @param in Input buffer + * @param in_len Number of input samples in the input buffer. Returns the number + * of samples processed + * @param out Output buffer + * @param out_len Size of the output buffer. Returns the number of samples written + */ +int speex_resampler_process_int(SpeexResamplerState *st, + spx_uint32_t channel_index, + const spx_int16_t *in, + spx_uint32_t *in_len, + spx_int16_t *out, + spx_uint32_t *out_len); + +/** Resample an interleaved float array. The input and output buffers must *not* overlap. + * @param st Resampler state + * @param in Input buffer + * @param in_len Number of input samples in the input buffer. Returns the number + * of samples processed. This is all per-channel. + * @param out Output buffer + * @param out_len Size of the output buffer. Returns the number of samples written. + * This is all per-channel. + */ +int speex_resampler_process_interleaved_float(SpeexResamplerState *st, + const float *in, + spx_uint32_t *in_len, + float *out, + spx_uint32_t *out_len); + +/** Resample an interleaved int array. The input and output buffers must *not* overlap. + * @param st Resampler state + * @param in Input buffer + * @param in_len Number of input samples in the input buffer. Returns the number + * of samples processed. This is all per-channel. + * @param out Output buffer + * @param out_len Size of the output buffer. Returns the number of samples written. + * This is all per-channel. + */ +int speex_resampler_process_interleaved_int(SpeexResamplerState *st, + const spx_int16_t *in, + spx_uint32_t *in_len, + spx_int16_t *out, + spx_uint32_t *out_len); + +/** Set (change) the input/output sampling rates (integer value). + * @param st Resampler state + * @param in_rate Input sampling rate (integer number of Hz). + * @param out_rate Output sampling rate (integer number of Hz). + */ +int speex_resampler_set_rate(SpeexResamplerState *st, + spx_uint32_t in_rate, + spx_uint32_t out_rate); + +/** Get the current input/output sampling rates (integer value). + * @param st Resampler state + * @param in_rate Input sampling rate (integer number of Hz) copied. + * @param out_rate Output sampling rate (integer number of Hz) copied. + */ +void speex_resampler_get_rate(SpeexResamplerState *st, + spx_uint32_t *in_rate, + spx_uint32_t *out_rate); + +/** Set (change) the input/output sampling rates and resampling ratio + * (fractional values in Hz supported). + * @param st Resampler state + * @param ratio_num Numerator of the sampling rate ratio + * @param ratio_den Denominator of the sampling rate ratio + * @param in_rate Input sampling rate rounded to the nearest integer (in Hz). + * @param out_rate Output sampling rate rounded to the nearest integer (in Hz). + */ +int speex_resampler_set_rate_frac(SpeexResamplerState *st, + spx_uint32_t ratio_num, + spx_uint32_t ratio_den, + spx_uint32_t in_rate, + spx_uint32_t out_rate); + +/** Get the current resampling ratio. This will be reduced to the least + * common denominator. + * @param st Resampler state + * @param ratio_num Numerator of the sampling rate ratio copied + * @param ratio_den Denominator of the sampling rate ratio copied + */ +void speex_resampler_get_ratio(SpeexResamplerState *st, + spx_uint32_t *ratio_num, + spx_uint32_t *ratio_den); + +/** Set (change) the conversion quality. + * @param st Resampler state + * @param quality Resampling quality between 0 and 10, where 0 has poor + * quality and 10 has very high quality. + */ +int speex_resampler_set_quality(SpeexResamplerState *st, + int quality); + +/** Get the conversion quality. + * @param st Resampler state + * @param quality Resampling quality between 0 and 10, where 0 has poor + * quality and 10 has very high quality. + */ +void speex_resampler_get_quality(SpeexResamplerState *st, + int *quality); + +/** Set (change) the input stride. + * @param st Resampler state + * @param stride Input stride + */ +void speex_resampler_set_input_stride(SpeexResamplerState *st, + spx_uint32_t stride); + +/** Get the input stride. + * @param st Resampler state + * @param stride Input stride copied + */ +void speex_resampler_get_input_stride(SpeexResamplerState *st, + spx_uint32_t *stride); + +/** Set (change) the output stride. + * @param st Resampler state + * @param stride Output stride + */ +void speex_resampler_set_output_stride(SpeexResamplerState *st, + spx_uint32_t stride); + +/** Get the output stride. + * @param st Resampler state copied + * @param stride Output stride + */ +void speex_resampler_get_output_stride(SpeexResamplerState *st, + spx_uint32_t *stride); + +/** Get the latency in input samples introduced by the resampler. + * @param st Resampler state + */ +int speex_resampler_get_input_latency(SpeexResamplerState *st); + +/** Get the latency in output samples introduced by the resampler. + * @param st Resampler state + */ +int speex_resampler_get_output_latency(SpeexResamplerState *st); + +/** Make sure that the first samples to go out of the resamplers don't have + * leading zeros. This is only useful before starting to use a newly created + * resampler. It is recommended to use that when resampling an audio file, as + * it will generate a file with the same length. For real-time processing, + * it is probably easier not to use this call (so that the output duration + * is the same for the first frame). + * @param st Resampler state + */ +int speex_resampler_skip_zeros(SpeexResamplerState *st); + +/** Reset a resampler so a new (unrelated) stream can be processed. + * @param st Resampler state + */ +int speex_resampler_reset_mem(SpeexResamplerState *st); + +/** Returns the English meaning for an error code + * @param err Error code + * @return English string + */ +const char *speex_resampler_strerror(int err); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/code/libspeex/include/speex/speex_stereo.h b/code/libspeex/include/speex/speex_stereo.h new file mode 100644 index 0000000..a259713 --- /dev/null +++ b/code/libspeex/include/speex/speex_stereo.h @@ -0,0 +1,91 @@ +/* Copyright (C) 2002 Jean-Marc Valin*/ +/** + @file speex_stereo.h + @brief Describes the handling for intensity stereo +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifndef STEREO_H +#define STEREO_H +/** @defgroup SpeexStereoState SpeexStereoState: Handling Speex stereo files + * This describes the Speex intensity stereo encoding/decoding + * @{ + */ + +#include "speex/speex_types.h" +#include "speex/speex_bits.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** If you access any of these fields directly, I'll personally come and bite you */ +typedef struct SpeexStereoState { + float balance; /**< Left/right balance info */ + float e_ratio; /**< Ratio of energies: E(left+right)/[E(left)+E(right)] */ + float smooth_left; /**< Smoothed left channel gain */ + float smooth_right; /**< Smoothed right channel gain */ + float reserved1; /**< Reserved for future use */ + float reserved2; /**< Reserved for future use */ +} SpeexStereoState; + +/** Deprecated. Use speex_stereo_state_init() instead. */ +#define SPEEX_STEREO_STATE_INIT {1,.5,1,1,0,0} + +/** Initialise/create a stereo stereo state */ +SpeexStereoState *speex_stereo_state_init(); + +/** Reset/re-initialise an already allocated stereo state */ +void speex_stereo_state_reset(SpeexStereoState *stereo); + +/** Destroy a stereo stereo state */ +void speex_stereo_state_destroy(SpeexStereoState *stereo); + +/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */ +void speex_encode_stereo(float *data, int frame_size, SpeexBits *bits); + +/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */ +void speex_encode_stereo_int(spx_int16_t *data, int frame_size, SpeexBits *bits); + +/** Transforms a mono frame into a stereo frame using intensity stereo info */ +void speex_decode_stereo(float *data, int frame_size, SpeexStereoState *stereo); + +/** Transforms a mono frame into a stereo frame using intensity stereo info */ +void speex_decode_stereo_int(spx_int16_t *data, int frame_size, SpeexStereoState *stereo); + +/** Callback handler for intensity stereo info */ +int speex_std_stereo_request_handler(SpeexBits *bits, void *state, void *data); + +#ifdef __cplusplus +} +#endif + +/** @} */ +#endif diff --git a/code/libspeex/include/speex/speex_types.h b/code/libspeex/include/speex/speex_types.h new file mode 100644 index 0000000..852fed8 --- /dev/null +++ b/code/libspeex/include/speex/speex_types.h @@ -0,0 +1,126 @@ +/* speex_types.h taken from libogg */ +/******************************************************************** + * * + * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE. * + * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * + * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE * + * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * + * * + * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2002 * + * by the Xiph.Org Foundation http://www.xiph.org/ * + * * + ******************************************************************** + + function: #ifdef jail to whip a few platforms into the UNIX ideal. + last mod: $Id: os_types.h 7524 2004-08-11 04:20:36Z conrad $ + + ********************************************************************/ +/** + @file speex_types.h + @brief Speex types +*/ +#ifndef _SPEEX_TYPES_H +#define _SPEEX_TYPES_H + +#if defined(_WIN32) + +# if defined(__CYGWIN__) +# include <_G_config.h> + typedef _G_int32_t spx_int32_t; + typedef _G_uint32_t spx_uint32_t; + typedef _G_int16_t spx_int16_t; + typedef _G_uint16_t spx_uint16_t; +# elif defined(__MINGW32__) + typedef short spx_int16_t; + typedef unsigned short spx_uint16_t; + typedef int spx_int32_t; + typedef unsigned int spx_uint32_t; +# elif defined(__MWERKS__) + typedef int spx_int32_t; + typedef unsigned int spx_uint32_t; + typedef short spx_int16_t; + typedef unsigned short spx_uint16_t; +# else + /* MSVC/Borland */ + typedef __int32 spx_int32_t; + typedef unsigned __int32 spx_uint32_t; + typedef __int16 spx_int16_t; + typedef unsigned __int16 spx_uint16_t; +# endif + +#elif defined(__MACOS__) + +# include <sys/types.h> + typedef SInt16 spx_int16_t; + typedef UInt16 spx_uint16_t; + typedef SInt32 spx_int32_t; + typedef UInt32 spx_uint32_t; + +#elif (defined(__APPLE__) && defined(__MACH__)) /* MacOS X Framework build */ + +# include <sys/types.h> + typedef int16_t spx_int16_t; + typedef u_int16_t spx_uint16_t; + typedef int32_t spx_int32_t; + typedef u_int32_t spx_uint32_t; + +#elif defined(__BEOS__) + + /* Be */ +# include <inttypes.h> + typedef int16_t spx_int16_t; + typedef u_int16_t spx_uint16_t; + typedef int32_t spx_int32_t; + typedef u_int32_t spx_uint32_t; + +#elif defined (__EMX__) + + /* OS/2 GCC */ + typedef short spx_int16_t; + typedef unsigned short spx_uint16_t; + typedef int spx_int32_t; + typedef unsigned int spx_uint32_t; + +#elif defined (DJGPP) + + /* DJGPP */ + typedef short spx_int16_t; + typedef int spx_int32_t; + typedef unsigned int spx_uint32_t; + +#elif defined(R5900) + + /* PS2 EE */ + typedef int spx_int32_t; + typedef unsigned spx_uint32_t; + typedef short spx_int16_t; + +#elif defined(__SYMBIAN32__) + + /* Symbian GCC */ + typedef signed short spx_int16_t; + typedef unsigned short spx_uint16_t; + typedef signed int spx_int32_t; + typedef unsigned int spx_uint32_t; + +#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X) + + typedef short spx_int16_t; + typedef unsigned short spx_uint16_t; + typedef long spx_int32_t; + typedef unsigned long spx_uint32_t; + +#elif defined(CONFIG_TI_C6X) + + typedef short spx_int16_t; + typedef unsigned short spx_uint16_t; + typedef int spx_int32_t; + typedef unsigned int spx_uint32_t; + +#else + +# include <speex/speex_config_types.h> + +#endif + +#endif /* _SPEEX_TYPES_H */ |