aboutsummaryrefslogtreecommitdiffstats
path: root/tasks.rst
diff options
context:
space:
mode:
Diffstat (limited to 'tasks.rst')
-rw-r--r--tasks.rst36
1 files changed, 36 insertions, 0 deletions
diff --git a/tasks.rst b/tasks.rst
index 2ac1938..d4f9dcc 100644
--- a/tasks.rst
+++ b/tasks.rst
@@ -216,6 +216,42 @@ route seems to be disabling the Auto-connect flag in the wlan0-ap settings,
then run ``sudo nmcli connection down wlan0-ap``, wait a minute, then you
should be given a list of access points to connect to as usual.
+Upgrading the Kernel and u-boot
+-------------------------------------
+
+The Novena kernel developers (aka, xobs) occasionally publishes updates to the
+linux kernel that shipped with the Novena boards. These updates come in the
+form of apt packges (.deb) in the ``repo.novena.io`` repository, but they are
+not automatically installed in the ``/boot`` partition of the onboard microSD
+card, so upgrading these packages and rebooting is not sufficient to upgrade
+your board.
+
+On the other hand, the ``u-boot-novena`` bootloader package *will* install
+itself on ``/boot`` if it is already mounted.
+
+The following steps will install an updated linux kernel and compiled device
+tree file (.dtb) to the appropriate location. It assumes that ``/boot`` has
+been mounted with the microSD first partition (aka, ``/dev/mmcblk0p1``), and
+that the ``repo.novena.io`` repository is configured and keys are installed.
+You will also have to change the ``3.19.0-00270-g3d69696`` filename part to the
+version of the kernel that has actually been fetched.
+
+::
+
+ sudo apt-get update
+ sudo apt-get install u-boot-novena linux-firmware-image-novena \
+ linux-headers-novena linux-image-novena
+ # Backup the old files
+ sudo cp /boot/zimage /boot/zimage.old
+ sudo cp /boot/novena.dtb /boot/novena.dtb.old
+ # Copy in the new files; vmlinuz is already in zimage format
+ sudo cp /usr/share/linux-novena/vmlinuz-3.19.0-00270-g3d69696.dtb /boot/novena.dtb
+ sudo cp /usr/share/linux-novena/vmlinuz-3.19.0-00270-g3d69696 /boot/zimage
+ # Flush filesystem data to the card
+ sync
+ # Reboot!
+ sudo reboot
+
Compiling and Installing the Kernel
-------------------------------------