From 8d02e8e9fd7341dc54684b45125b0cfc8e5a98f3 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Wed, 3 Aug 2011 17:07:53 -0400 Subject: Add examples/mini-exti-test.cpp. Nonportable (Maple Mini only) test of external interrupt functionality. When wired properly, this triggers various EXTI lines simultaneously, keeping track of the number of times each handler is invoked. --- examples/mini-exti-test.cpp | 251 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 251 insertions(+) create mode 100644 examples/mini-exti-test.cpp (limited to 'examples') diff --git a/examples/mini-exti-test.cpp b/examples/mini-exti-test.cpp new file mode 100644 index 0000000..e65c610 --- /dev/null +++ b/examples/mini-exti-test.cpp @@ -0,0 +1,251 @@ +/* + * EXTI test (Maple Mini only). + * + * Setup: For i from 1 to N_EXTI (see below), connect exti_i_pin to + * src_i_pin. Connect via SerialUSB and press a key to perform a test + * run. In the printed results For each EXTI within a test run, the + * number triggered should match the number handled. + */ + +#include +#include + +#include "wirish.h" + +// test routines +void run_exti_test(void); +void print_test_results(void); + +// -- State ------------------------------------------------------------------- + +// Test using EXTI lines 0 -- (N_EXTI - 1). +#define N_EXTI 6 + +// src_pins[i] determines the line level for EXTI i. these *must* be +// in GPIOA. if you want to change them, make sure they don't +// conflict with exti_pins[]. +// +// src_pins[0] = D5 = PA6 +// src_pins[1] = D4 = PA7 +// src_pins[2] = D27 = PA8 +// src_pins[3] = D26 = PA9 +// src_pins[4] = D25 = PA10 +// src_pins[5] = D22 = PA13 +#define SRC0 5 +#define SRC0_BIT BIT(6) +#define SRC1 4 +#define SRC1_BIT BIT(7) +#define SRC2 27 +#define SRC2_BIT BIT(8) +#define SRC3 26 +#define SRC3_BIT BIT(9) +#define SRC4 25 +#define SRC4_BIT BIT(10) +#define SRC5 22 +#define SRC5_BIT BIT(13) +// Setting a bit in GPIOA_SRC_MSK means that the given src pin will +// actually trigger interrupts. Useful for experimenting. +#define GPIOA_SRC_MSK \ + (SRC0_BIT | SRC1_BIT | SRC2_BIT | SRC3_BIT | SRC4_BIT | SRC5_BIT) +const int src_pins[N_EXTI] = { + SRC0, + SRC1, + SRC2, + SRC3, + SRC4, + SRC5, +}; +const int src_gpioa_msks[N_EXTI] = { + SRC0_BIT, + SRC1_BIT, + SRC2_BIT, + SRC3_BIT, + SRC4_BIT, + SRC5_BIT, +}; + +// exti_pins[i] <-> EXTI line i. make sure these don't conflict with +// src_pins. +const int exti_pins[N_EXTI] = { + D3, // PB0 + D10, // PA1 + D2, // PB2 + D19, // PB3 + D7, // PA4 + D6, // PA5 +}; + +// EXTI handlers +void exti_0_handler(void); +void exti_1_handler(void); +void exti_2_handler(void); +void exti_3_handler(void); +void exti_4_handler(void); +void exti_5_handler(void); +voidFuncPtr exti_handlers[N_EXTI] = { + exti_0_handler, + exti_1_handler, + exti_2_handler, + exti_3_handler, + exti_4_handler, + exti_5_handler, +}; + +// index i = number of times we've triggered EXTI line n +static uint32 n_triggered[N_EXTI]; + +// index i = number of times we've handled EXTI line n +volatile static uint32 n_handled[N_EXTI]; + +// -- setup() ----------------------------------------------------------------- + +void setup(void) { + // Set up pin modes and get line levels stable + for (int i = 0; i < N_EXTI; i++) { + pinMode(src_pins[i], OUTPUT); + digitalWrite(src_pins[i], LOW); + pinMode(exti_pins[i], INPUT); + } + + // Delay to ensure src_pins are all LOW before proceeding + delay(1); + + // Attach interrupts + for (int i = 0; i < N_EXTI; i++) { + attachInterrupt(exti_pins[i], exti_handlers[i], RISING); + } +} + +// -- loop() ------------------------------------------------------------------ + +void loop(void) { + // Wait for user to send a byte before starting + while (!SerialUSB.available()) + ; + while (SerialUSB.available()) { + SerialUSB.read(); + } + + // Run the test, print the results + run_exti_test(); + print_test_results(); + + // Clear out the triggered/handled state + for (int i = 0; i < N_EXTI; i++) { + n_triggered[i] = 0; + n_handled[i] = 0; + } + + SerialUSB.println(); + SerialUSB.println(); + SerialUSB.println(); +} + +// -- Test routines ----------------------------------------------------------- + +#define N_RUNS 100 +void run_exti_test(void) { + for (int run = 0; run < N_RUNS; run++) { + // Trigger EXTIs simultaneously + GPIOA_BASE->BSRR = GPIOA_SRC_MSK; + + // Reset line levels + GPIOA_BASE->BSRR = GPIOA_SRC_MSK << 16; + + // Update number of times triggered + for (int i = 0; i < N_EXTI; i++) { + if (GPIOA_SRC_MSK & src_gpioa_msks[i]) { + n_triggered[i]++; + } + } + } +} + +// string handling boilerplate +void resetl(void); +void appendl(const char str[]); +void appendl(uint32 n); +void printl(void); + +void print_test_results(void) { + SerialUSB.println("Results:"); + + resetl(); + appendl("EXTI"); + appendl("# Triggered"); + appendl("# Handled"); + printl(); + resetl(); + + for (uint32 i = 0; i < N_EXTI; i++) { + appendl(i); + appendl(n_triggered[i]); + appendl(n_handled[i]); + printl(); + resetl(); + } +} + +// -- EXTI handlers ----------------------------------------------------------- + +void exti_0_handler(void) { + n_handled[0]++; +} + +void exti_1_handler(void) { + n_handled[1]++; +} + +void exti_2_handler(void) { + n_handled[2]++; +} + +void exti_3_handler(void) { + n_handled[3]++; +} + +void exti_4_handler(void) { + n_handled[4]++; +} + +void exti_5_handler(void) { + n_handled[5]++; +} + +// -- String handling --------------------------------------------------------- + +#define C_SIZ 20 +#define LIN_SIZ 80 +char l[LIN_SIZ + 1]; +char tmp[C_SIZ + 1]; + +void resetl(void) { + l[0] = '\0'; +} + +void appendl(const char str[]) { + snprintf(tmp, C_SIZ, "%-*s", C_SIZ, str); + strncat(l, tmp, LIN_SIZ - strlen(tmp)); +} + +void appendl(uint32 n) { + snprintf(tmp, C_SIZ, "%-*u", C_SIZ, n); + strncat(l, tmp, LIN_SIZ - strlen(tmp)); +} + +void printl(void) { + SerialUSB.println(l); +} + +// -- init()/main() ----------------------------------------------------------- + +__attribute__((constructor)) void premain() { init(); } + +int main(void) { + setup(); + + while (true) + loop(); + + return 0; +} -- cgit v1.2.3