From 427427ec3bcb58eadaa9c62477f70a5f3c6f39e0 Mon Sep 17 00:00:00 2001
From: Bryan Newbold <bnewbold@archive.org>
Date: Wed, 16 Jan 2019 13:24:08 -0800
Subject: mailserver role

---
 .../templates/etc_dovecot_conf.d_10-ssl.conf.j2    | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 roles/mailserver/templates/etc_dovecot_conf.d_10-ssl.conf.j2

(limited to 'roles/mailserver/templates/etc_dovecot_conf.d_10-ssl.conf.j2')

diff --git a/roles/mailserver/templates/etc_dovecot_conf.d_10-ssl.conf.j2 b/roles/mailserver/templates/etc_dovecot_conf.d_10-ssl.conf.j2
new file mode 100644
index 0000000..8ba6ae5
--- /dev/null
+++ b/roles/mailserver/templates/etc_dovecot_conf.d_10-ssl.conf.j2
@@ -0,0 +1,53 @@
+##
+## SSL settings
+##
+
+# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
+ssl = required
+
+# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
+# dropping root privileges, so keep the key file unreadable by anyone but
+# root. Included doc/mkcert.sh can be used to easily generate self-signed
+# certificate, just make sure to update the domains in dovecot-openssl.cnf
+ssl_cert = </etc/letsencrypt/live/{{ domain }}/fullchain.pem
+ssl_key = </etc/letsencrypt/live/{{ domain }}/privkey.pem
+
+# If key file is password protected, give the password here. Alternatively
+# give it when starting dovecot with -p parameter. Since this file is often
+# world-readable, you may want to place this setting instead to a different
+# root owned 0600 file by using ssl_key_password = <path.
+#ssl_key_password =
+
+# PEM encoded trusted certificate authority. Set this only if you intend to use
+# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
+# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
+#ssl_ca = /etc/ssl/ca.pem
+
+# Require that CRL check succeeds for client certificates.
+#ssl_require_crl = yes
+
+# Request client to send a certificate. If you also want to require it, set
+# auth_ssl_require_client_cert=yes in auth section.
+#ssl_verify_client_cert = no
+
+# Which field from certificate to use for username. commonName and
+# x500UniqueIdentifier are the usual choices. You'll also need to set
+# auth_ssl_username_from_cert=yes.
+#ssl_cert_username_field = commonName
+
+# How often to regenerate the SSL parameters file. Generation is quite CPU
+# intensive operation. The value is in hours, 0 disables regeneration
+# entirely.
+#ssl_parameters_regenerate = 168
+
+# SSL protocols to use
+ssl_protocols = !SSLv2 !SSLv3
+
+# SSL ciphers to use
+#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
+
+# SSL crypto device to use, for valid values run "openssl engine"
+#ssl_crypto_device =
+
+# DH parameters length to use.
+ssl_dh_parameters_length = 2048
-- 
cgit v1.2.3