From 44eedc5c44416a97b3f5ca03d596ec3c9fb29380 Mon Sep 17 00:00:00 2001
From: Eric Andersen <andersen@codepoet.org>
Date: Sat, 9 Oct 2004 02:49:33 +0000
Subject: facelift step number two

---
 package/sed/sed.mk      | 87 +++++++++++++++++++++++++++++++++++++++----------
 package/sed/sedcheck.sh | 21 ++++++++++++
 2 files changed, 91 insertions(+), 17 deletions(-)
 create mode 100755 package/sed/sedcheck.sh

(limited to 'package/sed')

diff --git a/package/sed/sed.mk b/package/sed/sed.mk
index e197bca3e..108d4fe3a 100644
--- a/package/sed/sed.mk
+++ b/package/sed/sed.mk
@@ -7,14 +7,15 @@ SED_VER:=4.1.2
 SED_SOURCE:=sed-$(SED_VER).tar.gz
 SED_SITE:=ftp://ftp.gnu.org/gnu/sed
 SED_CAT:=zcat
-SED_DIR:=$(BUILD_DIR)/sed-$(SED_VER)
+SED_DIR1:=$(TOOL_BUILD_DIR)/sed-$(SED_VER)
+SED_DIR2:=$(BUILD_DIR)/sed-$(SED_VER)
 SED_BINARY:=sed/sed
 SED_TARGET_BINARY:=bin/sed
-ifeq ($(BR2_LARGEFILE),y)
+ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
 SED_CPPFLAGS=-D_FILE_OFFSET_BITS=64
 endif
 SED:=$(STAGING_DIR)/bin/sed -i -e
-
+HOST_SED_TARGET=$(shell package/sed/sedcheck.sh)
 
 $(DL_DIR)/$(SED_SOURCE):
 	mkdir -p $(DL_DIR)
@@ -23,17 +24,69 @@ $(DL_DIR)/$(SED_SOURCE):
 sed-source: $(DL_DIR)/$(SED_SOURCE)
 
 
+#############################################################
+#
+# build sed for use on the host system
+#
+#############################################################
+$(SED_DIR1)/.unpacked: $(DL_DIR)/$(SED_SOURCE)
+	mkdir -p $(TOOL_BUILD_DIR)
+	mkdir -p $(STAGING_DIR)/bin;
+	$(SED_CAT) $(DL_DIR)/$(SED_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
+	touch $(SED_DIR1)/.unpacked
+
+$(SED_DIR1)/.configured: $(SED_DIR1)/.unpacked
+	(cd $(SED_DIR1); rm -rf config.cache; \
+		./configure \
+		--prefix=$(STAGING_DIR) \
+		--prefix=/usr \
+	);
+	touch  $(SED_DIR1)/.configured
+
+$(SED_DIR1)/$(SED_BINARY): $(SED_DIR1)/.configured
+	$(MAKE) -C $(SED_DIR1)
+
+# This stuff is needed to work around GNU make deficiencies
+build-sed-host-binary: $(SED_DIR1)/$(SED_BINARY)
+	@if [ -L $(STAGING_DIR)/$(SED_TARGET_BINARY) ] ; then \
+		rm -f $(STAGING_DIR)/$(SED_TARGET_BINARY); fi;
+	@if [ ! -f $(STAGING_DIR)/$(SED_TARGET_BINARY) -o $(STAGING_DIR)/$(SED_TARGET_BINARY) \
+	-ot $(SED_DIR1)/$(SED_BINARY) ] ; then \
+	    set -x; \
+	    mkdir -p $(STAGING_DIR)/bin; \
+	    $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SED_DIR1) install; \
+	    mv $(STAGING_DIR)/usr/bin/sed $(STAGING_DIR)/bin/; \
+	    rm -rf $(STAGING_DIR)/share/locale $(STAGING_DIR)/usr/info \
+		    $(STAGING_DIR)/usr/man $(STAGING_DIR)/usr/share/doc; fi
+
+use-sed-host-binary:
+	@if [ -x /usr/bin/sed ]; then SED="/usr/bin/sed"; else \
+	    if [ -x /bin/sed ]; then SED="/bin/sed"; fi; fi; \
+	    mkdir -p $(STAGING_DIR)/bin; \
+	    rm -f $(STAGING_DIR)/$(SED_TARGET_BINARY); \
+	    ln -s $$SED $(STAGING_DIR)/$(SED_TARGET_BINARY)
+
+host-sed: $(HOST_SED_TARGET)
+
+host-sed-clean:
+	$(MAKE) DESTDIR=$(STAGING_DIR) -C $(SED_DIR1) uninstall
+	-$(MAKE) -C $(SED_DIR1) clean
+
+host-sed-dirclean:
+	rm -rf $(SED_DIR1)
+
+
 #############################################################
 #
 # build sed for use on the target system
 #
 #############################################################
-$(SED_DIR)/.unpacked: $(DL_DIR)/$(SED_SOURCE)
+$(SED_DIR2)/.unpacked: $(DL_DIR)/$(SED_SOURCE)
 	$(SED_CAT) $(DL_DIR)/$(SED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	touch $(SED_DIR)/.unpacked
+	touch $(SED_DIR2)/.unpacked
 
-$(SED_DIR)/.configured: $(SED_DIR)/.unpacked
-	(cd $(SED_DIR); rm -rf config.cache; \
+$(SED_DIR2)/.configured: $(SED_DIR2)/.unpacked
+	(cd $(SED_DIR2); rm -rf config.cache; \
 		$(TARGET_CONFIGURE_OPTS) \
 		CFLAGS="$(TARGET_CFLAGS)" \
 		CPPFLAGS="$(SED_CFLAGS)" \
@@ -53,20 +106,20 @@ $(SED_DIR)/.configured: $(SED_DIR)/.unpacked
 		--infodir=/usr/info \
 		$(DISABLE_NLS) \
 	);
-	touch  $(SED_DIR)/.configured
+	touch  $(SED_DIR2)/.configured
 
-$(SED_DIR)/$(SED_BINARY): $(SED_DIR)/.configured
-	$(MAKE) CC=$(TARGET_CC) -C $(SED_DIR)
+$(SED_DIR2)/$(SED_BINARY): $(SED_DIR2)/.configured
+	$(MAKE) CC=$(TARGET_CC) -C $(SED_DIR2)
 
 # This stuff is needed to work around GNU make deficiencies
-sed-target_binary: $(SED_DIR)/$(SED_BINARY)
+sed-target_binary: $(SED_DIR2)/$(SED_BINARY)
 	@if [ -L $(TARGET_DIR)/$(SED_TARGET_BINARY) ] ; then \
 		rm -f $(TARGET_DIR)/$(SED_TARGET_BINARY); fi;
 
-	@if [ ! -f $(SED_DIR)/$(SED_BINARY) -o $(TARGET_DIR)/$(SED_TARGET_BINARY) \
-	-ot $(SED_DIR)/$(SED_BINARY) ] ; then \
+	@if [ ! -f $(SED_DIR2)/$(SED_BINARY) -o $(TARGET_DIR)/$(SED_TARGET_BINARY) \
+	-ot $(SED_DIR2)/$(SED_BINARY) ] ; then \
 	    set -x; \
-	    $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR) install; \
+	    $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR2) install; \
 	    mv $(TARGET_DIR)/usr/bin/sed $(TARGET_DIR)/bin/; \
 	    rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
 		    $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc; fi
@@ -74,10 +127,10 @@ sed-target_binary: $(SED_DIR)/$(SED_BINARY)
 sed: uclibc sed-target_binary
 
 sed-clean:
-	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR) uninstall
-	-$(MAKE) -C $(SED_DIR) clean
+	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR2) uninstall
+	-$(MAKE) -C $(SED_DIR2) clean
 
 sed-dirclean:
-	rm -rf $(SED_DIR)
+	rm -rf $(SED_DIR2)
 
 
diff --git a/package/sed/sedcheck.sh b/package/sed/sedcheck.sh
new file mode 100755
index 000000000..4d645b6ab
--- /dev/null
+++ b/package/sed/sedcheck.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ -x /usr/bin/sed ]; then 
+    SED="/usr/bin/sed";
+else
+    if [ -x /bin/sed ]; then 
+	SED="/bin/sed";
+    fi;
+fi;
+
+echo "HELLO" > .sedtest
+$SED -i -e "s/HELLO/GOODBYE/" .sedtest >/dev/null 2>&1
+
+if [ $? != 0 ] ; then
+	echo build-sed-host-binary
+else
+	echo use-sed-host-binary
+fi;
+rm -f .sedtest
+
+
-- 
cgit v1.2.3