diff options
Diffstat (limited to 'board/kosagi/novena/imx6q-novena.dts')
| -rw-r--r-- | board/kosagi/novena/imx6q-novena.dts | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/board/kosagi/novena/imx6q-novena.dts b/board/kosagi/novena/imx6q-novena.dts new file mode 100644 index 000000000..8d05d5462 --- /dev/null +++ b/board/kosagi/novena/imx6q-novena.dts @@ -0,0 +1,295 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "Kosagi Novena (i.MX6 Quad)"; + compatible = "fsl,imx6q-novena", "fsl,imx6q"; + chosen { + bootargs = "console=ttymxc1,115200 earlyprintk root=/dev/mmcblk0p2 rootwait rootfstype=ext4"; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "novena::usr0"; + gpios = <&gpio3 19 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "fsl,imx-audio-novena"; + model = "imx-audio-novena"; + clocks = <&clks 169>, <&clks 57>, <&clks 173>; + clock-names = "cko1", "cko1_sel", "pll4_audio"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + power-gpio = <&gpio5 17 0>; + jack-gpio = <&gpio5 15 0>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT", + "Ext Spk", "SPK_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; +}; + +&ahci { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 + MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 + + /* uSDHC2 */ + MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* Write protect */ + MX6Q_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* Card detect */ + + /* Ethernet reset */ + MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + + /* Headphone plug */ + MX6Q_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 + + /* Touchscreen interrupt */ + MX6Q_PAD_DISP0_DAT19__GPIO5_IO13 0x80000000 + + /* GPIO LED */ + MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 + + /* PCI express */ + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* Wakeup */ + MX6Q_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* Reset */ + MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* Power On */ + MX6Q_PAD_EIM_A22__GPIO2_IO16 0x80000000 /* Wifi kill */ + + /* FPGA power */ + MX6Q_PAD_SD1_DAT1__GPIO1_IO17 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + mac-address = [00 00 00 00 00 00]; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + non-removable; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_2>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&audmux { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + stmpe610@0 { + compatible = "st,stmpe610"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x44>; + irq-over-gpio; + irq-gpios = <&gpio5 13 0>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_adc { + compatible = "st,stmpe-adc"; + }; + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <2>; + ts,settling = <2>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; +/* + stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; +*/ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_1>; + status = "okay"; + + codec: es8328@11 { + compatible = "everest,es8328"; + reg = <0x11>; +// VDDA-supply = <®_2p5v>; +// VDDIO-supply = <®_3p3v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_1>; + fsl,spi-num-chipselects = <3>; + status = "okay"; + + spidev@0x00 { + compatible = "spidev"; + spi-max-frequency = <30000000>; + reg = <0>; + }; +}; + +&pcie { + power-enable = <&gpio7 12 0>; + pcie-reset = <&gpio3 29 0>; + wake-up = <&gpio3 22 0>; + disable-endpoint = <&gpio2 16 0>; + status = "okay"; +}; + +/* +&caam { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x40000>; + ranges = <0 0x02100000 0x40000>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x100000 0x1000>; + interrupts = <0 105 0x04>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x200000 0x1000>; + interrupts = <0 106 0x04>; + }; +}; +*/ + |